diff -Nru raidutils-0.0.6/debian/changelog raidutils-0.0.6/debian/changelog --- raidutils-0.0.6/debian/changelog 2011-12-03 04:17:16.000000000 +0000 +++ raidutils-0.0.6/debian/changelog 2012-11-12 08:38:19.000000000 +0000 @@ -1,8 +1,8 @@ -raidutils (0.0.6-19build1) precise; urgency=low +raidutils (0.0.6-20) unstable; urgency=low - * No-change rebuild to drop spurious libsfgcc1 dependency on armhf. + * multiarch fix - -- Adam Conrad Fri, 02 Dec 2011 21:17:16 -0700 + -- Barak A. Pearlmutter Mon, 12 Nov 2012 08:38:19 +0000 raidutils (0.0.6-19) unstable; urgency=low diff -Nru raidutils-0.0.6/debian/compat raidutils-0.0.6/debian/compat --- raidutils-0.0.6/debian/compat 2010-12-05 14:56:55.000000000 +0000 +++ raidutils-0.0.6/debian/compat 2012-11-12 08:37:34.000000000 +0000 @@ -1 +1 @@ -8 +9 diff -Nru raidutils-0.0.6/debian/control raidutils-0.0.6/debian/control --- raidutils-0.0.6/debian/control 2011-10-04 23:19:20.000000000 +0000 +++ raidutils-0.0.6/debian/control 2012-11-12 14:46:45.000000000 +0000 @@ -2,11 +2,11 @@ Section: admin Priority: optional Maintainer: Barak A. Pearlmutter -Build-Depends: debhelper (>= 8), - autoconf (>= 2.58), - autotools-dev (>= 20100122.1~), +Build-Depends: debhelper (>= 9), + dh-autoreconf, + dh-exec, linux-libc-dev | linux-kernel-headers -Standards-Version: 3.9.2 +Standards-Version: 3.9.4 Homepage: http://i2o.shadowconnect.com Vcs-Git: git://git.debian.org/git/collab-maint/raidutils.git Vcs-Browser: http://git.debian.org/?p=collab-maint/raidutils.git @@ -14,6 +14,7 @@ Package: dpt-i2o-raidutils Architecture: any Conflicts: raidutils (<< 0.0.6-6) +Pre-Depends: multiarch-support Depends: ${shlibs:Depends}, ${misc:Depends} Provides: dtp-i2o-raidutils Description: Adaptec I2O hardware RAID management utilities diff -Nru raidutils-0.0.6/debian/dpt-i2o-raidutils.install raidutils-0.0.6/debian/dpt-i2o-raidutils.install --- raidutils-0.0.6/debian/dpt-i2o-raidutils.install 2010-12-05 14:56:55.000000000 +0000 +++ raidutils-0.0.6/debian/dpt-i2o-raidutils.install 2012-11-12 08:37:34.000000000 +0000 @@ -1,2 +1,3 @@ +#! /usr/bin/dh-exec usr/sbin/* -usr/lib/*.so.* +usr/lib/${DEB_HOST_MULTIARCH}/*.so.* diff -Nru raidutils-0.0.6/debian/patches/debian-changes raidutils-0.0.6/debian/patches/debian-changes --- raidutils-0.0.6/debian/patches/debian-changes 2011-10-04 23:20:09.000000000 +0000 +++ raidutils-0.0.6/debian/patches/debian-changes 2012-11-12 14:49:05.000000000 +0000 @@ -5,14 +5,10 @@ information below has been extracted from the changelog. Adjust it or drop it. . - raidutils (0.0.6-19) unstable; urgency=low + raidutils (0.0.6-20) unstable; urgency=low . - * single-debian-patch source option (closes: #643259) - * new debian/rules targets to silence lintian - * bump debian standards version - * the word is "removable", not "removeable" + * multiarch fix Author: Barak A. Pearlmutter -Bug-Debian: http://bugs.debian.org/643259 --- The information above should follow the Patch Tagging Guidelines, please @@ -27,43705 +23,4445 @@ Reviewed-By: Last-Update: ---- raidutils-0.0.6.orig/Makefile.in -+++ raidutils-0.0.6/Makefile.in -@@ -1,8 +1,9 @@ --# Makefile.in generated by automake 1.9.2 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, --# 2003, 2004 Free Software Foundation, Inc. -+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -+# Inc. - # This Makefile.in is free software; the Free Software Foundation - # gives unlimited permission to copy and/or distribute it, - # with or without modifications, as long as this notice is preserved. -@@ -13,15 +14,12 @@ - # PARTICULAR PURPOSE. +--- raidutils-0.0.6.orig/config.sub ++++ raidutils-0.0.6/config.sub +@@ -1,9 +1,10 @@ + #! /bin/sh + # Configuration validation subroutine script. + # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +-# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. ++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 ++# Free Software Foundation, Inc. - @SET_MAKE@ --srcdir = @srcdir@ --top_srcdir = @top_srcdir@ - VPATH = @srcdir@ - pkgdatadir = $(datadir)/@PACKAGE@ --pkglibdir = $(libdir)/@PACKAGE@ - pkgincludedir = $(includedir)/@PACKAGE@ --top_builddir = . -+pkglibdir = $(libdir)/@PACKAGE@ -+pkglibexecdir = $(libexecdir)/@PACKAGE@ - am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd --INSTALL = @INSTALL@ - install_sh_DATA = $(install_sh) -c -m 644 - install_sh_PROGRAM = $(install_sh) -c - install_sh_SCRIPT = $(install_sh) -c -@@ -35,30 +33,37 @@ PRE_UNINSTALL = : - POST_UNINSTALL = : - build_triplet = @build@ - host_triplet = @host@ -+subdir = . - DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(top_srcdir)/configure \ - $(top_srcdir)/distribution/raidutils.spec.in AUTHORS COPYING \ - ChangeLog INSTALL NEWS compile config.guess config.sub depcomp \ - install-sh ltmain.sh missing --subdir = . - ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 - am__aclocal_m4_deps = $(top_srcdir)/configure.in - am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) - am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ -- configure.lineno configure.status.lineno -+ configure.lineno config.status.lineno - mkinstalldirs = $(install_sh) -d - CONFIG_HEADER = config.h - CONFIG_CLEAN_FILES = distribution/raidutils.spec -+CONFIG_CLEAN_VPATH_FILES = - SOURCES = - DIST_SOURCES = - RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ -- install-exec-recursive install-info-recursive \ -- install-recursive installcheck-recursive installdirs-recursive \ -- pdf-recursive ps-recursive uninstall-info-recursive \ -- uninstall-recursive -+ install-dvi-recursive install-exec-recursive \ -+ install-html-recursive install-info-recursive \ -+ install-pdf-recursive install-ps-recursive install-recursive \ -+ installcheck-recursive installdirs-recursive pdf-recursive \ -+ ps-recursive uninstall-recursive -+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ -+ distclean-recursive maintainer-clean-recursive -+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ -+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ -+ distdir dist dist-all distcheck - ETAGS = etags - CTAGS = ctags - DIST_SUBDIRS = $(SUBDIRS) -@@ -66,16 +71,39 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCE - distdir = $(PACKAGE)-$(VERSION) - top_distdir = $(distdir) - am__remove_distdir = \ -- { test ! -d $(distdir) \ -- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ -- && rm -fr $(distdir); }; } -+ { test ! -d "$(distdir)" \ -+ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ -+ && rm -fr "$(distdir)"; }; } -+am__relativize = \ -+ dir0=`pwd`; \ -+ sed_first='s,^$[^/]*$/.*$$,\1,'; \ -+ sed_rest='s,^[^/]*/*,,'; \ -+ sed_last='s,^.*/$[^/]*$$$,\1,'; \ -+ sed_butlast='s,/*[^/]*$$,,'; \ -+ while test -n "$$dir1"; do \ -+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ -+ if test "$$first" != "."; then \ -+ if test "$$first" = ".."; then \ -+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ -+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ -+ else \ -+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ -+ if test "$$first2" = "$$first"; then \ -+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ -+ else \ -+ dir2="../$$dir2"; \ -+ fi; \ -+ dir0="$$dir0"/"$$first"; \ -+ fi; \ -+ fi; \ -+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ -+ done; \ -+ reldir="$$dir2" - DIST_ARCHIVES = $(distdir).tar.gz - GZIP_ENV = --best - distuninstallcheck_listfiles = find . -type f -print - distcleancheck_listfiles = find . -type f -print - ACLOCAL = @ACLOCAL@ --AMDEP_FALSE = @AMDEP_FALSE@ --AMDEP_TRUE = @AMDEP_TRUE@ - AMTAR = @AMTAR@ - AR = @AR@ - AUTOCONF = @AUTOCONF@ -@@ -94,48 +122,57 @@ CXXFLAGS = @CXXFLAGS@ - CYGPATH_W = @CYGPATH_W@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ --ECHO = @ECHO@ -+DSYMUTIL = @DSYMUTIL@ -+DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ - ECHO_N = @ECHO_N@ - ECHO_T = @ECHO_T@ - EGREP = @EGREP@ - EXEEXT = @EXEEXT@ --F77 = @F77@ --FFLAGS = @FFLAGS@ -+FGREP = @FGREP@ -+GREP = @GREP@ -+INSTALL = @INSTALL@ - INSTALL_DATA = @INSTALL_DATA@ - INSTALL_PROGRAM = @INSTALL_PROGRAM@ - INSTALL_SCRIPT = @INSTALL_SCRIPT@ - INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -+LD = @LD@ - LDFLAGS = @LDFLAGS@ - LIBOBJS = @LIBOBJS@ - LIBS = @LIBS@ - LIBTOOL = @LIBTOOL@ -+LIPO = @LIPO@ - LN_S = @LN_S@ - LTLIBOBJS = @LTLIBOBJS@ - MAKEINFO = @MAKEINFO@ -+MKDIR_P = @MKDIR_P@ -+NM = @NM@ -+NMEDIT = @NMEDIT@ -+OBJDUMP = @OBJDUMP@ - OBJEXT = @OBJEXT@ -+OTOOL = @OTOOL@ -+OTOOL64 = @OTOOL64@ - PACKAGE = @PACKAGE@ - PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ - PACKAGE_NAME = @PACKAGE_NAME@ - PACKAGE_STRING = @PACKAGE_STRING@ - PACKAGE_TARNAME = @PACKAGE_TARNAME@ -+PACKAGE_URL = @PACKAGE_URL@ - PACKAGE_VERSION = @PACKAGE_VERSION@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - RANLIB = @RANLIB@ -+SED = @SED@ - SET_MAKE = @SET_MAKE@ - SHELL = @SHELL@ - STRIP = @STRIP@ - VERSION = @VERSION@ --ac_ct_AR = @ac_ct_AR@ -+abs_builddir = @abs_builddir@ -+abs_srcdir = @abs_srcdir@ -+abs_top_builddir = @abs_top_builddir@ -+abs_top_srcdir = @abs_top_srcdir@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ --ac_ct_F77 = @ac_ct_F77@ --ac_ct_RANLIB = @ac_ct_RANLIB@ --ac_ct_STRIP = @ac_ct_STRIP@ --am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ --am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ --am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ --am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ -+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ - am__include = @am__include@ - am__leading_dot = @am__leading_dot@ - am__quote = @am__quote@ -@@ -147,29 +184,43 @@ build_alias = @build_alias@ - build_cpu = @build_cpu@ - build_os = @build_os@ - build_vendor = @build_vendor@ -+builddir = @builddir@ - datadir = @datadir@ -+datarootdir = @datarootdir@ -+docdir = @docdir@ -+dvidir = @dvidir@ - exec_prefix = @exec_prefix@ - host = @host@ - host_alias = @host_alias@ - host_cpu = @host_cpu@ - host_os = @host_os@ - host_vendor = @host_vendor@ -+htmldir = @htmldir@ - includedir = @includedir@ - infodir = @infodir@ - install_sh = @install_sh@ - libdir = @libdir@ - libexecdir = @libexecdir@ -+localedir = @localedir@ - localstatedir = @localstatedir@ -+lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -+pdfdir = @pdfdir@ - prefix = @prefix@ - program_transform_name = @program_transform_name@ -+psdir = @psdir@ - sbindir = @sbindir@ - sharedstatedir = @sharedstatedir@ -+srcdir = @srcdir@ - sysconfdir = @sysconfdir@ - target_alias = @target_alias@ -+top_build_prefix = @top_build_prefix@ -+top_builddir = @top_builddir@ -+top_srcdir = @top_srcdir@ - SUBDIRS = lib raidutil raideng -+ACLOCAL_AMFLAGS = -I m4 - all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive +-timestamp='2003-06-18' ++timestamp='2010-01-22' -@@ -180,15 +231,15 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefi - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ -- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ -- cd $(srcdir) && $(AUTOMAKE) --gnu \ -+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ -+ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ -- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ -- cd $(top_srcdir) && \ -- $(AUTOMAKE) --gnu Makefile -+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ -+ $(am__cd) $(top_srcdir) && \ -+ $(AUTOMAKE) --gnu Makefile - .PRECIOUS: Makefile - Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ -@@ -204,21 +255,22 @@ $(top_builddir)/config.status: $(top_src - $(SHELL) ./config.status --recheck + # This file is (in principle) common to ALL GNU software. + # The presence of a machine in this file suggests that SOME GNU software +@@ -21,22 +22,26 @@ timestamp='2003-06-18' + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, +-# Boston, MA 02111-1307, USA. +- ++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA ++# 02110-1301, USA. ++# + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. - $(top_srcdir)/configure: $(am__configure_deps) -- cd $(srcdir) && $(AUTOCONF) -+ $(am__cd) $(srcdir) && $(AUTOCONF) - $(ACLOCAL_M4): $(am__aclocal_m4_deps) -- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -+$(am__aclocal_m4_deps): ++ + # Please send patches to . Submit a context +-# diff and a properly formatted ChangeLog entry. ++# diff and a properly formatted GNU ChangeLog entry. + # + # Configuration subroutine to validate and canonicalize a configuration type. + # Supply the specified configuration type as an argument. + # If it is invalid, we print an error message on stderr and exit with code 1. + # Otherwise, we print the canonical config type on stdout and succeed. - config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ -- $(MAKE) stamp-h1; \ -+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ - else :; fi ++# You can get the latest version of this script from: ++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD ++ + # This file is supposed to be the same for all GNU packages + # and recognize all the CPU types, system types and aliases + # that are meaningful with *any* GNU software. +@@ -70,8 +75,9 @@ Report bugs and patches to /dev/null 2>&1; then \ - include_option=--etags-include; \ -@@ -320,93 +382,114 @@ TAGS: tags-recursive $(HEADERS) $(SOURCE - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ -- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ -+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ -+ shift; \ -+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ -- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -- $$tags $$unique; \ -+ if test $$# -gt 0; then \ -+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -+ "$$@" $$unique; \ -+ else \ -+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -+ $$unique; \ -+ fi; \ - fi - ctags: CTAGS - CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) -- tags=; \ -- here=`pwd`; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -- test -z "$(CTAGS_ARGS)$$tags$$unique" \ -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ -+ test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ -- $$tags $$unique -+ $$unique - - GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ -- && cd $(top_srcdir) \ -- && gtags -i $(GTAGS_ARGS) $$here -+ && $(am__cd) $(top_srcdir) \ -+ && gtags -i $(GTAGS_ARGS) "$$here" - - distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - - distdir: $(DISTFILES) - $(am__remove_distdir) -- mkdir $(distdir) -- $(mkdir_p) $(distdir)/distribution -- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ -- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ -- list='$(DISTFILES)'; for file in $$list; do \ -- case $$file in \ -- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ -- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ -- esac; \ -+ test -d "$(distdir)" || mkdir "$(distdir)" -+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ -+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ -+ list='$(DISTFILES)'; \ -+ dist_files=`for file in $$list; do echo $$file; done | \ -+ sed -e "s|^$$srcdirstrip/||;t" \ -+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ -+ case $$dist_files in \ -+ */*) $(MKDIR_P) `echo "$$dist_files" | \ -+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ -+ sort -u` ;; \ -+ esac; \ -+ for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ -- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ -- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ -- dir="/$$dir"; \ -- $(mkdir_p) "$(distdir)$$dir"; \ -- else \ -- dir=''; \ -- fi; \ - if test -d $$d/$$file; then \ -+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ -+ if test -d "$(distdir)/$$file"; then \ -+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ -+ fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ -- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ -+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ -+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ -- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ -+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ -- test -f $(distdir)/$$file \ -- || cp -p $$d/$$file $(distdir)/$$file \ -+ test -f "$(distdir)/$$file" \ -+ || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ -+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ -- || $(mkdir_p) "$(distdir)/$$subdir" \ -+ || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ -- distdir=`$(am__cd) $(distdir) && pwd`; \ -- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ -- (cd $$subdir && \ -+ fi; \ -+ done -+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ -+ if test "$$subdir" = .; then :; else \ -+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ -+ $(am__relativize); \ -+ new_distdir=$$reldir; \ -+ dir1=$$subdir; dir2="$(top_distdir)"; \ -+ $(am__relativize); \ -+ new_top_distdir=$$reldir; \ -+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ -+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ -+ ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ -- top_distdir="$$top_distdir" \ -- distdir="$$distdir/$$subdir" \ -+ top_distdir="$$new_top_distdir" \ -+ distdir="$$new_distdir" \ -+ am__remove_distdir=: \ -+ am__skip_length_check=: \ -+ am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ -+ -test -n "$(am__skip_mode_fix)" \ -+ || find "$(distdir)" -type d ! -perm -755 \ -+ -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ -- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ -- || chmod -R a+r $(distdir) -+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ -+ || chmod -R a+r "$(distdir)" - dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) -@@ -415,6 +498,14 @@ dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -+dist-lzma: distdir -+ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma -+ $(am__remove_distdir) -+ -+dist-xz: distdir -+ tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz -+ $(am__remove_distdir) -+ - dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) -@@ -438,13 +529,17 @@ dist dist-all: distdir - distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ -- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ -+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ -- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ -+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ -+ *.tar.lzma*) \ -+ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ -+ *.tar.xz*) \ -+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ -- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ -+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac -@@ -452,9 +547,11 @@ distcheck: dist - mkdir $(distdir)/_build - mkdir $(distdir)/_inst - chmod a-w $(distdir) -+ test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ -- && cd $(distdir)/_build \ -+ && am__cwd=`pwd` \ -+ && $(am__cd) $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ -@@ -476,13 +573,15 @@ distcheck: dist - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ -- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck -+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ -+ && cd "$$am__cwd" \ -+ || exit 1 - $(am__remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ -- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' -+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' - distuninstallcheck: -- @cd $(distuninstallcheck_dir) \ -+ @$(am__cd) '$(distuninstallcheck_dir)' \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ -@@ -524,6 +623,7 @@ clean-generic: - - distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - - maintainer-clean-generic: - @echo "This command is intended for maintainers to use" -@@ -544,18 +644,38 @@ dvi-am: - - html: html-recursive - -+html-am: -+ - info: info-recursive - - info-am: - - install-data-am: - -+install-dvi: install-dvi-recursive -+ -+install-dvi-am: -+ - install-exec-am: - -+install-html: install-html-recursive -+ -+install-html-am: -+ - install-info: install-info-recursive - -+install-info-am: -+ - install-man: - -+install-pdf: install-pdf-recursive -+ -+install-pdf-am: -+ -+install-ps: install-ps-recursive -+ -+install-ps-am: -+ - installcheck-am: - - maintainer-clean: maintainer-clean-recursive -@@ -576,24 +696,27 @@ ps: ps-recursive - - ps-am: - --uninstall-am: uninstall-info-am -+uninstall-am: - --uninstall-info: uninstall-info-recursive -+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ -+ ctags-recursive install-am install-strip tags-recursive - --.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ -- check-am clean clean-generic clean-libtool clean-recursive \ -- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ -- dist-shar dist-tarZ dist-zip distcheck distclean \ -- distclean-generic distclean-hdr distclean-libtool \ -- distclean-recursive distclean-tags distcleancheck distdir \ -+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ -+ all all-am am--refresh check check-am clean clean-generic \ -+ clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ -+ dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ -+ distcheck distclean distclean-generic distclean-hdr \ -+ distclean-libtool distclean-tags distcleancheck distdir \ - distuninstallcheck dvi dvi-am html html-am info info-am \ -- install install-am install-data install-data-am install-exec \ -- install-exec-am install-info install-info-am install-man \ -+ install install-am install-data install-data-am install-dvi \ -+ install-dvi-am install-exec install-exec-am install-html \ -+ install-html-am install-info install-info-am install-man \ -+ install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ -- maintainer-clean-recursive mostlyclean mostlyclean-generic \ -- mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ -- tags tags-recursive uninstall uninstall-am uninstall-info-am -+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ -+ ps ps-am tags tags-recursive uninstall uninstall-am -+ - - # Tell versions [3.59,3.63) of GNU make to not export all variables. - # Otherwise a system limit (for SysV at least) may be exceeded. ---- raidutils-0.0.6.orig/ltmain.sh -+++ raidutils-0.0.6/ltmain.sh -@@ -1,4595 +1,3140 @@ --# ltmain.sh - Provide generalized library-building support services. --# NOTE: Changing this file will not affect anything until you rerun configure. --# --# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004 --# Free Software Foundation, Inc. --# Originally by Gordon Matzigkeit , 1996 --# --# This program is free software; you can redistribute it and/or modify -+# Generated from ltmain.m4sh. -+ -+# ltmain.sh (GNU libtool) 2.2.6b -+# Written by Gordon Matzigkeit , 1996 -+ -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. -+# This is free software; see the source for copying conditions. There is NO -+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -+ -+# GNU Libtool is free software; you can redistribute it and/or modify - # it under the terms of the GNU General Public License as published by - # the Free Software Foundation; either version 2 of the License, or - # (at your option) any later version. - # --# This program is distributed in the hope that it will be useful, but -+# As a special exception to the GNU General Public License, -+# if you distribute this file as part of a program or library that -+# is built using GNU Libtool, you may include this file under the -+# same distribution terms that you use for the rest of that program. -+# -+# GNU Libtool is distributed in the hope that it will be useful, but - # WITHOUT ANY WARRANTY; without even the implied warranty of - # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - # General Public License for more details. - # - # You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+# along with GNU Libtool; see the file COPYING. If not, a copy -+# can be downloaded from http://www.gnu.org/licenses/gpl.html, -+# or obtained by writing to the Free Software Foundation, Inc., -+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+ -+# Usage: $progname [OPTION]... [MODE-ARG]... -+# -+# Provide generalized library-building support services. - # --# As a special exception to the GNU General Public License, if you --# distribute this file as part of a program that contains a --# configuration script generated by Autoconf, you may include it under --# the same distribution terms that you use for the rest of that program. -+# --config show all configuration variables -+# --debug enable verbose shell tracing -+# -n, --dry-run display commands without modifying any files -+# --features display basic configuration information and exit -+# --mode=MODE use operation mode MODE -+# --preserve-dup-deps don't remove duplicate dependency libraries -+# --quiet, --silent don't print informational messages -+# --tag=TAG use configuration variables from tag TAG -+# -v, --verbose print informational messages (default) -+# --version print version information -+# -h, --help print short or long help message -+# -+# MODE must be one of the following: -+# -+# clean remove files from the build directory -+# compile compile a source file into a libtool object -+# execute automatically set library path, then run a program -+# finish complete the installation of libtool libraries -+# install install libraries or executables -+# link create a library or an executable -+# uninstall remove libraries from an installed directory -+# -+# MODE-ARGS vary depending on the MODE. -+# Try `$progname --help --mode=MODE' for a more detailed description of MODE. -+# -+# When reporting a bug, please describe a test case to reproduce it and -+# include the following information: -+# -+# host-triplet: $host -+# shell: $SHELL -+# compiler: $LTCC -+# compiler flags: $LTCFLAGS -+# linker: $LD (gnu? $with_gnu_ld) -+# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2 -+# automake: $automake_version -+# autoconf: $autoconf_version -+# -+# Report bugs to . -+ -+PROGRAM=ltmain.sh -+PACKAGE=libtool -+VERSION="2.2.6b Debian-2.2.6b-2" -+TIMESTAMP="" -+package_revision=1.3017 -+ -+# Be Bourne compatible -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -+fi -+BIN_SH=xpg4; export BIN_SH # for Tru64 -+DUALCASE=1; export DUALCASE # for MKS sh -+ -+# NLS nuisances: We save the old values to restore during execute mode. -+# Only set LANG and LC_ALL to C if already set. -+# These must not be set unconditionally because not all systems understand -+# e.g. LANG=C (notably SCO). -+lt_user_locale= -+lt_safe_locale= -+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -+do -+ eval "if test \"\${$lt_var+set}\" = set; then -+ save_$lt_var=\$$lt_var -+ $lt_var=C -+ export $lt_var -+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" -+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" -+ fi" -+done - --basename="s,^.*/,,g" -+$lt_unset CDPATH - --# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh --# is ksh but when the shell is invoked as "sh" and the current value of --# the _XPG environment variable is not equal to 1 (one), the special --# positional parameter $0, within a function call, is the name of the --# function. --progpath="$0" - --# RH: define SED for historic ltconfig's generated by Libtool 1.3 --[ -z "$SED" ] && SED=sed - --# The name of this program: --progname=`echo "$progpath" | $SED $basename` --modename="$progname" -+ -+ -+: ${CP="cp -f"} -+: ${ECHO="echo"} -+: ${EGREP="/bin/grep -E"} -+: ${FGREP="/bin/grep -F"} -+: ${GREP="/bin/grep"} -+: ${LN_S="ln -s"} -+: ${MAKE="make"} -+: ${MKDIR="mkdir"} -+: ${MV="mv -f"} -+: ${RM="rm -f"} -+: ${SED="/bin/sed"} -+: ${SHELL="${CONFIG_SHELL-/bin/sh}"} -+: ${Xsed="$SED -e 1s/^X//"} - - # Global variables: - EXIT_SUCCESS=0 - EXIT_FAILURE=1 -+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - --PROGRAM=ltmain.sh --PACKAGE=libtool --VERSION=1.5.6 --TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42)" -+exit_status=$EXIT_SUCCESS - -+# Make sure IFS has a sensible default -+lt_nl=' -+' -+IFS=" $lt_nl" -+ -+dirname="s,/[^/]*$,," -+basename="s,^.*/,," -+ -+# func_dirname_and_basename file append nondir_replacement -+# perform func_basename and func_dirname in a single function -+# call: -+# dirname: Compute the dirname of FILE. If nonempty, -+# add APPEND to the result, otherwise set result -+# to NONDIR_REPLACEMENT. -+# value returned in "$func_dirname_result" -+# basename: Compute filename of FILE. -+# value retuned in "$func_basename_result" -+# Implementation must be kept synchronized with func_dirname -+# and func_basename. For efficiency, we do not delegate to -+# those functions but instead duplicate the functionality here. -+func_dirname_and_basename () -+{ -+ # Extract subdirectory from the argument. -+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` -+ if test "X$func_dirname_result" = "X${1}"; then -+ func_dirname_result="${3}" -+ else -+ func_dirname_result="$func_dirname_result${2}" -+ fi -+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -+} - --# Check that we have a working $echo. --if test "X$1" = X--no-reexec; then -- # Discard the --no-reexec flag, and continue. -- shift --elif test "X$1" = X--fallback-echo; then -- # Avoid inline document here, it may be left over -- : --elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then -- # Yippee, $echo works! -- : --else -- # Restart under the correct shell, and then maybe $echo will work. -- exec $SHELL "$progpath" --no-reexec ${1+"$@"} --fi -+# Generated shell functions inserted here. - --if test "X$1" = X--fallback-echo; then -- # used as fallback echo -- shift -- cat <&2 -- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 -- exit $EXIT_FAILURE --fi -+# func_verbose arg... -+# Echo program name prefixed message in verbose mode only. -+func_verbose () -+{ -+ $opt_verbose && func_echo ${1+"$@"} - --# Global variables. --mode=$default_mode --nonopt= --prev= --prevopt= --run= --show="$echo" --show_help= --execute_dlfiles= --lo2o="s/\\.lo\$/.${objext}/" --o2lo="s/\\.${objext}\$/.lo/" -+ # A bug in bash halts the script if the last line of a function -+ # fails when set -e is in force, so we need another command to -+ # work around that: -+ : -+} - --##################################### --# Shell function definitions: --# This seems to be the best place for them -+# func_error arg... -+# Echo program name prefixed message to standard error. -+func_error () -+{ -+ $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 -+} - --# func_win32_libid arg --# return the library type of file 'arg' --# --# Need a lot of goo to handle *both* DLLs and import libs --# Has to be a shell function in order to 'eat' the argument --# that is supplied when $file_magic_command is called. --func_win32_libid () { -- win32_libid_type="unknown" -- win32_fileres=`file -L $1 2>/dev/null` -- case $win32_fileres in -- *ar\ archive\ import\ library*) # definitely import -- win32_libid_type="x86 archive import" -- ;; -- *ar\ archive*) # could be an import, or static -- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ -- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then -- win32_nmres=`eval $NM -f posix -A $1 | \ -- sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` -- if test "X$win32_nmres" = "Ximport" ; then -- win32_libid_type="x86 archive import" -- else -- win32_libid_type="x86 archive static" -- fi -- fi -- ;; -- *DLL*) -- win32_libid_type="x86 DLL" -- ;; -- *executable*) # but shell scripts are "executable" too... -- case $win32_fileres in -- *MS\ Windows\ PE\ Intel*) -- win32_libid_type="x86 DLL" -- ;; -- esac -- ;; -- esac -- $echo $win32_libid_type -+# func_warning arg... -+# Echo program name prefixed warning message to standard error. -+func_warning () -+{ -+ $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 -+ -+ # bash bug again: -+ : - } - -+# func_fatal_error arg... -+# Echo program name prefixed message to standard error, and exit. -+func_fatal_error () -+{ -+ func_error ${1+"$@"} -+ exit $EXIT_FAILURE -+} - --# func_infer_tag arg --# Infer tagged configuration to use if any are available and --# if one wasn't chosen via the "--tag" command line option. --# Only attempt this if the compiler in the base compile --# command doesn't match the default compiler. --# arg is usually of the form 'gcc ...' --func_infer_tag () { -- if test -n "$available_tags" && test -z "$tagname"; then -- CC_quoted= -- for arg in $CC; do -- case $arg in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- arg="\"$arg\"" -- ;; -- esac -- CC_quoted="$CC_quoted $arg" -- done -- case $@ in -- # Blanks in the command may have been stripped by the calling shell, -- # but not from the CC environment variable when configure was run. -- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; -- # Blanks at the start of $base_compile will cause this to fail -- # if we don't check for them as well. -- *) -- for z in $available_tags; do -- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then -- # Evaluate the configuration. -- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" -- CC_quoted= -- for arg in $CC; do -- # Double-quote args containing other shell metacharacters. -- case $arg in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- arg="\"$arg\"" -- ;; -- esac -- CC_quoted="$CC_quoted $arg" -- done -- case "$@ " in -- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) -- # The compiler in the base compile command matches -- # the one in the tagged configuration. -- # Assume this is the tagged configuration we want. -- tagname=$z -- break -- ;; -- esac -- fi -- done -- # If $tagname still isn't set, then no tagged configuration -- # was found and let the user know that the "--tag" command -- # line option must be used. -- if test -z "$tagname"; then -- $echo "$modename: unable to infer tagged configuration" -- $echo "$modename: specify a tag with \`--tag'" 1>&2 -- exit $EXIT_FAILURE --# else --# $echo "$modename: using $tagname tagged configuration" -- fi -- ;; -- esac -- fi -+# func_fatal_help arg... -+# Echo program name prefixed message to standard error, followed by -+# a help hint, and exit. -+func_fatal_help () -+{ -+ func_error ${1+"$@"} -+ func_fatal_error "$help" - } --# End of Shell function definitions --##################################### -+help="Try \`$progname --help' for more information." ## default - --# Darwin sucks --eval std_shrext=\"$shrext_cmds\" - --# Parse our command line options once, thoroughly. --while test "$#" -gt 0 --do -- arg="$1" -- shift -+# func_grep expression filename -+# Check whether EXPRESSION matches any line of FILENAME, without output. -+func_grep () -+{ -+ $GREP "$1" "$2" >/dev/null 2>&1 -+} - -- case $arg in -- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; -- *) optarg= ;; -- esac - -- # If the previous option needs an argument, assign it. -- if test -n "$prev"; then -- case $prev in -- execute_dlfiles) -- execute_dlfiles="$execute_dlfiles $arg" -- ;; -- tag) -- tagname="$arg" -- preserve_args="${preserve_args}=$arg" -- -- # Check whether tagname contains only valid characters -- case $tagname in -- *[!-_A-Za-z0-9,/]*) -- $echo "$progname: invalid tag name: $tagname" 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -+# func_mkdir_p directory-path -+# Make sure the entire path to DIRECTORY-PATH is available. -+func_mkdir_p () -+{ -+ my_directory_path="$1" -+ my_dir_list= - -- case $tagname in -- CC) -- # Don't test for the "default" C tag, as we know, it's there, but -- # not specially marked. -- ;; -- *) -- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then -- taglist="$taglist $tagname" -- # Evaluate the configuration. -- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" -- else -- $echo "$progname: ignoring unknown tag $tagname" 1>&2 -- fi -- ;; -+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then -+ -+ # Protect directory names starting with `-' -+ case $my_directory_path in -+ -*) my_directory_path="./$my_directory_path" ;; - esac -- ;; -- *) -- eval "$prev=\$arg" -- ;; -- esac - -- prev= -- prevopt= -- continue -- fi -+ # While some portion of DIR does not yet exist... -+ while test ! -d "$my_directory_path"; do -+ # ...make a list in topmost first order. Use a colon delimited -+ # list incase some portion of path contains whitespace. -+ my_dir_list="$my_directory_path:$my_dir_list" - -- # Have we seen a non-optional argument yet? -- case $arg in -- --help) -- show_help=yes -- ;; -+ # If the last portion added has no slash in it, the list is done -+ case $my_directory_path in */*) ;; *) break ;; esac - -- --version) -- $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" -- $echo -- $echo "Copyright (C) 2003 Free Software Foundation, Inc." -- $echo "This is free software; see the source for copying conditions. There is NO" -- $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." -- exit $EXIT_SUCCESS -- ;; -+ # ...otherwise throw away the child directory and loop -+ my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` -+ done -+ my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` - -- --config) -- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath -- # Now print the configurations for the tags. -- for tagname in $taglist; do -- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" -- done -- exit $EXIT_SUCCESS -- ;; -+ save_mkdir_p_IFS="$IFS"; IFS=':' -+ for my_dir in $my_dir_list; do -+ IFS="$save_mkdir_p_IFS" -+ # mkdir can fail with a `File exist' error if two processes -+ # try to create one of the directories concurrently. Don't -+ # stop in that case! -+ $MKDIR "$my_dir" 2>/dev/null || : -+ done -+ IFS="$save_mkdir_p_IFS" - -- --debug) -- $echo "$progname: enabling shell trace mode" -- set -x -- preserve_args="$preserve_args $arg" -- ;; -+ # Bail out if we (or some other process) failed to create a directory. -+ test -d "$my_directory_path" || \ -+ func_fatal_error "Failed to create \`$1'" -+ fi -+} - -- --dry-run | -n) -- run=: -- ;; - -- --features) -- $echo "host: $host" -- if test "$build_libtool_libs" = yes; then -- $echo "enable shared libraries" -- else -- $echo "disable shared libraries" -- fi -- if test "$build_old_libs" = yes; then -- $echo "enable static libraries" -+# func_mktempdir [string] -+# Make a temporary directory that won't clash with other running -+# libtool processes, and avoids race conditions if possible. If -+# given, STRING is the basename for that directory. -+func_mktempdir () -+{ -+ my_template="${TMPDIR-/tmp}/${1-$progname}" -+ -+ if test "$opt_dry_run" = ":"; then -+ # Return a directory name, but don't create it in dry-run mode -+ my_tmpdir="${my_template}-$$" - else -- $echo "disable static libraries" -- fi -- exit $EXIT_SUCCESS -- ;; - -- --finish) mode="finish" ;; -+ # If mktemp works, use that first and foremost -+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` - -- --mode) prevopt="--mode" prev=mode ;; -- --mode=*) mode="$optarg" ;; -+ if test ! -d "$my_tmpdir"; then -+ # Failing that, at least try and use $RANDOM to avoid a race -+ my_tmpdir="${my_template}-${RANDOM-0}$$" - -- --preserve-dup-deps) duplicate_deps="yes" ;; -+ save_mktempdir_umask=`umask` -+ umask 0077 -+ $MKDIR "$my_tmpdir" -+ umask $save_mktempdir_umask -+ fi - -- --quiet | --silent) -- show=: -- preserve_args="$preserve_args $arg" -- ;; -+ # If we're not in dry-run mode, bomb out on failure -+ test -d "$my_tmpdir" || \ -+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" -+ fi - -- --tag) prevopt="--tag" prev=tag ;; -- --tag=*) -- set tag "$optarg" ${1+"$@"} -- shift -- prev=tag -- preserve_args="$preserve_args --tag" -- ;; -+ $ECHO "X$my_tmpdir" | $Xsed -+} - -- -dlopen) -- prevopt="-dlopen" -- prev=execute_dlfiles -- ;; - -- -*) -- $echo "$modename: unrecognized option \`$arg'" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- ;; -+# func_quote_for_eval arg -+# Aesthetically quote ARG to be evaled later. -+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT -+# is double-quoted, suitable for a subsequent eval, whereas -+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters -+# which are still active within double quotes backslashified. -+func_quote_for_eval () -+{ -+ case $1 in -+ *[\\\`\"\$]*) -+ func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; -+ *) -+ func_quote_for_eval_unquoted_result="$1" ;; -+ esac - -- *) -- nonopt="$arg" -- break -- ;; -- esac --done -+ case $func_quote_for_eval_unquoted_result in -+ # Double-quote args containing shell metacharacters to delay -+ # word splitting, command substitution and and variable -+ # expansion for a subsequent eval. -+ # Many Bourne shells cannot handle close brackets correctly -+ # in scan sets, so we specify it separately. -+ *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" -+ ;; -+ *) -+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" -+ esac -+} - --if test -n "$prevopt"; then -- $echo "$modename: option \`$prevopt' requires an argument" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE --fi - --# If this variable is set in any of the actions, the command in it --# will be execed at the end. This prevents here-documents from being --# left over by shells. --exec_cmd= -+# func_quote_for_expand arg -+# Aesthetically quote ARG to be evaled later; same as above, -+# but do not quote variable references. -+func_quote_for_expand () -+{ -+ case $1 in -+ *[\\\`\"]*) -+ my_arg=`$ECHO "X$1" | $Xsed \ -+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; -+ *) -+ my_arg="$1" ;; -+ esac - --if test -z "$show_help"; then -+ case $my_arg in -+ # Double-quote args containing shell metacharacters to delay -+ # word splitting and command substitution for a subsequent eval. -+ # Many Bourne shells cannot handle close brackets correctly -+ # in scan sets, so we specify it separately. -+ *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -+ my_arg="\"$my_arg\"" -+ ;; -+ esac - -- # Infer the operation mode. -- if test -z "$mode"; then -- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 -- $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2 -- case $nonopt in -- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) -- mode=link -- for arg -- do -- case $arg in -- -c) -- mode=compile -- break -- ;; -- esac -- done -- ;; -- *db | *dbx | *strace | *truss) -- mode=execute -- ;; -- *install*|cp|mv) -- mode=install -- ;; -- *rm) -- mode=uninstall -- ;; -- *) -- # If we have no mode, but dlfiles were specified, then do execute mode. -- test -n "$execute_dlfiles" && mode=execute -+ func_quote_for_expand_result="$my_arg" -+} - -- # Just use the default operation mode. -- if test -z "$mode"; then -- if test -n "$nonopt"; then -- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 -- else -- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 -- fi -+ -+# func_show_eval cmd [fail_exp] -+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -+# is given, then evaluate it. -+func_show_eval () -+{ -+ my_cmd="$1" -+ my_fail_exp="${2-:}" -+ -+ ${opt_silent-false} || { -+ func_quote_for_expand "$my_cmd" -+ eval "func_echo $func_quote_for_expand_result" -+ } -+ -+ if ${opt_dry_run-false}; then :; else -+ eval "$my_cmd" -+ my_status=$? -+ if test "$my_status" -eq 0; then :; else -+ eval "(exit $my_status); $my_fail_exp" - fi -- ;; -- esac -- fi -+ fi -+} - -- # Only execute mode is allowed to have -dlopen flags. -- if test -n "$execute_dlfiles" && test "$mode" != execute; then -- $echo "$modename: unrecognized option \`-dlopen'" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- fi - -- # Change the help message to a mode-specific one. -- generic_help="$help" -- help="Try \`$modename --help --mode=$mode' for more information." -+# func_show_eval_locale cmd [fail_exp] -+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -+# is given, then evaluate it. Use the saved locale for evaluation. -+func_show_eval_locale () -+{ -+ my_cmd="$1" -+ my_fail_exp="${2-:}" - -- # These modes are in order of execution frequency so that they run quickly. -- case $mode in -- # libtool compile mode -- compile) -- modename="$modename: compile" -- # Get the compilation command and the source file. -- base_compile= -- srcfile="$nonopt" # always keep a non-empty value in "srcfile" -- suppress_opt=yes -- suppress_output= -- arg_mode=normal -- libobj= -- later= -+ ${opt_silent-false} || { -+ func_quote_for_expand "$my_cmd" -+ eval "func_echo $func_quote_for_expand_result" -+ } -+ -+ if ${opt_dry_run-false}; then :; else -+ eval "$lt_user_locale -+ $my_cmd" -+ my_status=$? -+ eval "$lt_safe_locale" -+ if test "$my_status" -eq 0; then :; else -+ eval "(exit $my_status); $my_fail_exp" -+ fi -+ fi -+} - -- for arg -- do -- case "$arg_mode" in -- arg ) -- # do not "continue". Instead, add this to base_compile -- lastarg="$arg" -- arg_mode=normal -- ;; - -- target ) -- libobj="$arg" -- arg_mode=normal -- continue -- ;; - -- normal ) -- # Accept any command-line options. -- case $arg in -- -o) -- if test -n "$libobj" ; then -- $echo "$modename: you cannot specify \`-o' more than once" 1>&2 -- exit $EXIT_FAILURE -- fi -- arg_mode=target -- continue -- ;; - -- -static | -prefer-pic | -prefer-non-pic) -- later="$later $arg" -- continue -- ;; - -- -no-suppress) -- suppress_opt=no -- continue -- ;; -+# func_version -+# Echo version message to standard output and exit. -+func_version () -+{ -+ $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { -+ s/^# // -+ s/^# *$// -+ s/$(C)$[ 0-9,-]*$ [1-9][0-9]*$/\1\2/ -+ p -+ }' < "$progpath" -+ exit $? -+} - -- -Xcompiler) -- arg_mode=arg # the next one goes into the "base_compile" arg list -- continue # The current "srcfile" will either be retained or -- ;; # replaced later. I would guess that would be a bug. -+# func_usage -+# Echo short help message to standard output and exit. -+func_usage () -+{ -+ $SED -n '/^# Usage:/,/# -h/ { -+ s/^# // -+ s/^# *$// -+ s/\$progname/'$progname'/ -+ p -+ }' < "$progpath" -+ $ECHO -+ $ECHO "run \`$progname --help | more' for full usage" -+ exit $? -+} - -- -Wc,*) -- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` -- lastarg= -- save_ifs="$IFS"; IFS=',' -- for arg in $args; do -- IFS="$save_ifs" -+# func_help -+# Echo long help message to standard output and exit. -+func_help () -+{ -+ $SED -n '/^# Usage:/,/# Report bugs to/ { -+ s/^# // -+ s/^# *$// -+ s*\$progname*'$progname'* -+ s*\$host*'"$host"'* -+ s*\$SHELL*'"$SHELL"'* -+ s*\$LTCC*'"$LTCC"'* -+ s*\$LTCFLAGS*'"$LTCFLAGS"'* -+ s*\$LD*'"$LD"'* -+ s/\$with_gnu_ld/'"$with_gnu_ld"'/ -+ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ -+ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ -+ p -+ }' < "$progpath" -+ exit $? -+} - -- # Double-quote args containing other shell metacharacters. -- # Many Bourne shells cannot handle close brackets correctly -- # in scan sets, so we specify it separately. -- case $arg in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- arg="\"$arg\"" -- ;; -- esac -- lastarg="$lastarg $arg" -- done -- IFS="$save_ifs" -- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` -+# func_missing_arg argname -+# Echo program name prefixed message to standard error and set global -+# exit_cmd. -+func_missing_arg () -+{ -+ func_error "missing argument for $1" -+ exit_cmd=exit -+} - -- # Add the arguments to base_compile. -- base_compile="$base_compile $lastarg" -- continue -- ;; -+exit_cmd=: - -- * ) -- # Accept the current argument as the source file. -- # The previous "srcfile" becomes the current argument. -- # -- lastarg="$srcfile" -- srcfile="$arg" -- ;; -- esac # case $arg -- ;; -- esac # case $arg_mode - -- # Aesthetically quote the previous argument. -- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - -- case $lastarg in -- # Double-quote args containing other shell metacharacters. -- # Many Bourne shells cannot handle close brackets correctly -- # in scan sets, so we specify it separately. -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- lastarg="\"$lastarg\"" -- ;; -- esac - -- base_compile="$base_compile $lastarg" -- done # for arg - -- case $arg_mode in -- arg) -- $echo "$modename: you must specify an argument for -Xcompile" -- exit $EXIT_FAILURE -- ;; -- target) -- $echo "$modename: you must specify a target with \`-o'" 1>&2 -- exit $EXIT_FAILURE -- ;; -- *) -- # Get the name of the library object. -- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` -- ;; -- esac -+# Check that we have a working $ECHO. -+if test "X$1" = X--no-reexec; then -+ # Discard the --no-reexec flag, and continue. -+ shift -+elif test "X$1" = X--fallback-echo; then -+ # Avoid inline document here, it may be left over -+ : -+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then -+ # Yippee, $ECHO works! -+ : -+else -+ # Restart under the correct shell, and then maybe $ECHO will work. -+ exec $SHELL "$progpath" --no-reexec ${1+"$@"} -+fi - -- # Recognize several different file suffixes. -- # If the user specifies -o file.o, it is replaced with file.lo -- xform='[cCFSifmso]' -- case $libobj in -- *.ada) xform=ada ;; -- *.adb) xform=adb ;; -- *.ads) xform=ads ;; -- *.asm) xform=asm ;; -- *.c++) xform=c++ ;; -- *.cc) xform=cc ;; -- *.ii) xform=ii ;; -- *.class) xform=class ;; -- *.cpp) xform=cpp ;; -- *.cxx) xform=cxx ;; -- *.f90) xform=f90 ;; -- *.for) xform=for ;; -- *.java) xform=java ;; -- esac -+if test "X$1" = X--fallback-echo; then -+ # used as fallback echo -+ shift -+ cat <&2 -- exit $EXIT_FAILURE -- ;; -- esac -+# Global variables. -+# $mode is unset -+nonopt= -+execute_dlfiles= -+preserve_args= -+lo2o="s/\\.lo\$/.${objext}/" -+o2lo="s/\\.${objext}\$/.lo/" -+extracted_archives= -+extracted_serial=0 - -- func_infer_tag $base_compile -+opt_dry_run=false -+opt_duplicate_deps=false -+opt_silent=false -+opt_debug=: - -- for arg in $later; do -- case $arg in -- -static) -- build_old_libs=yes -- continue -- ;; -+# If this variable is set in any of the actions, the command in it -+# will be execed at the end. This prevents here-documents from being -+# left over by shells. -+exec_cmd= - -- -prefer-pic) -- pic_mode=yes -- continue -- ;; -+# func_fatal_configuration arg... -+# Echo program name prefixed message to standard error, followed by -+# a configuration failure hint, and exit. -+func_fatal_configuration () -+{ -+ func_error ${1+"$@"} -+ func_error "See the $PACKAGE documentation for more information." -+ func_fatal_error "Fatal configuration error." -+} - -- -prefer-non-pic) -- pic_mode=no -- continue -- ;; -- esac -+ -+# func_config -+# Display the configuration for all the tags in this script. -+func_config () -+{ -+ re_begincf='^# ### BEGIN LIBTOOL' -+ re_endcf='^# ### END LIBTOOL' -+ -+ # Default configuration. -+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" -+ -+ # Now print the configurations for the tags. -+ for tagname in $taglist; do -+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" - done - -- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` -- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$xdir" = "X$obj"; then -- xdir= -- else -- xdir=$xdir/ -- fi -- lobj=${xdir}$objdir/$objname -+ exit $? -+} - -- if test -z "$base_compile"; then -- $echo "$modename: you must specify a compilation command" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -+# func_features -+# Display the features supported by this script. -+func_features () -+{ -+ $ECHO "host: $host" -+ if test "$build_libtool_libs" = yes; then -+ $ECHO "enable shared libraries" -+ else -+ $ECHO "disable shared libraries" - fi -- -- # Delete any leftover library objects. - if test "$build_old_libs" = yes; then -- removelist="$obj $lobj $libobj ${libobj}T" -+ $ECHO "enable static libraries" - else -- removelist="$lobj $libobj ${libobj}T" -+ $ECHO "disable static libraries" - fi - -- $run $rm $removelist -- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 -+ exit $? -+} - -- # On Cygwin there's no "real" PIC flag so we must build both object types -- case $host_os in -- cygwin* | mingw* | pw32* | os2*) -- pic_mode=default -+# func_enable_tag tagname -+# Verify that TAGNAME is valid, and either flag an error and exit, or -+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist -+# variable here. -+func_enable_tag () -+{ -+ # Global variable: -+ tagname="$1" -+ -+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" -+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" -+ sed_extractcf="/$re_begincf/,/$re_endcf/p" -+ -+ # Validate tagname. -+ case $tagname in -+ *[!-_A-Za-z0-9,/]*) -+ func_fatal_error "invalid tag name: $tagname" - ;; -- esac -- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then -- # non-PIC code in shared libraries is not supported -- pic_mode=default -- fi -+ esac - -- # Calculate the filename of the output object if compiler does -- # not support -o with -c -- if test "$compiler_c_o" = no; then -- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} -- lockfile="$output_obj.lock" -- removelist="$removelist $output_obj $lockfile" -- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 -- else -- output_obj= -- need_locks=no -- lockfile= -- fi -+ # Don't test for the "default" C tag, as we know it's -+ # there but not specially marked. -+ case $tagname in -+ CC) ;; -+ *) -+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then -+ taglist="$taglist $tagname" - -- # Lock this critical section if it is needed -- # We use this script file to make the link, it avoids creating a new file -- if test "$need_locks" = yes; then -- until $run ln "$progpath" "$lockfile" 2>/dev/null; do -- $show "Waiting for $lockfile to be removed" -- sleep 2 -- done -- elif test "$need_locks" = warn; then -- if test -f "$lockfile"; then -- $echo "\ --*** ERROR, $lockfile exists and contains: --`cat $lockfile 2>/dev/null` -+ # Evaluate the configuration. Be careful to quote the path -+ # and the sed script, to avoid splitting on whitespace, but -+ # also don't use non-portable quotes within backquotes within -+ # quotes we have to do it in 2 steps: -+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` -+ eval "$extractedcf" -+ else -+ func_error "ignoring unknown tag $tagname" -+ fi -+ ;; -+ esac -+} - --This indicates that another process is trying to use the same --temporary object file, and libtool could not work around it because --your compiler does not support \`-c' and \`-o' together. If you --repeat this compilation, it may succeed, by chance, but you had better --avoid parallel builds (make -j) in this platform, or get a better --compiler." -+# Parse options once, thoroughly. This comes as soon as possible in -+# the script to make things like `libtool --version' happen quickly. -+{ - -- $run $rm $removelist -- exit $EXIT_FAILURE -- fi -- $echo $srcfile > "$lockfile" -- fi -+ # Shorthand for --mode=foo, only valid as the first argument -+ case $1 in -+ clean|clea|cle|cl) -+ shift; set dummy --mode clean ${1+"$@"}; shift -+ ;; -+ compile|compil|compi|comp|com|co|c) -+ shift; set dummy --mode compile ${1+"$@"}; shift -+ ;; -+ execute|execut|execu|exec|exe|ex|e) -+ shift; set dummy --mode execute ${1+"$@"}; shift -+ ;; -+ finish|finis|fini|fin|fi|f) -+ shift; set dummy --mode finish ${1+"$@"}; shift -+ ;; -+ install|instal|insta|inst|ins|in|i) -+ shift; set dummy --mode install ${1+"$@"}; shift -+ ;; -+ link|lin|li|l) -+ shift; set dummy --mode link ${1+"$@"}; shift -+ ;; -+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) -+ shift; set dummy --mode uninstall ${1+"$@"}; shift -+ ;; -+ esac - -- if test -n "$fix_srcfile_path"; then -- eval srcfile=\"$fix_srcfile_path\" -- fi -+ # Parse non-mode specific arguments: -+ while test "$#" -gt 0; do -+ opt="$1" -+ shift - -- $run $rm "$libobj" "${libobj}T" -+ case $opt in -+ --config) func_config ;; - -- # Create a libtool object file (analogous to a ".la" file), -- # but don't create it if we're doing a dry run. -- test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then -- $echo "\ --*** ERROR, $lockfile contains: --`cat $lockfile 2>/dev/null` -+ # Separate optargs to long options: -+ -dlopen=*|--mode=*|--tag=*) -+ func_opt_split "$opt" -+ set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} -+ shift -+ ;; - --but it should contain: --$srcfile -+ -\?|-h) func_usage ;; -+ --help) opt_help=: ;; -+ --version) func_version ;; - --This indicates that another process is trying to use the same --temporary object file, and libtool could not work around it because --your compiler does not support \`-c' and \`-o' together. If you --repeat this compilation, it may succeed, by chance, but you had better --avoid parallel builds (make -j) in this platform, or get a better --compiler." -+ -*) func_fatal_help "unrecognized option \`$opt'" ;; - -- $run $rm $removelist -- exit $EXIT_FAILURE -- fi -+ *) nonopt="$opt" -+ break -+ ;; -+ esac -+ done - -- # Just move the object if needed, then go on to compile the next one -- if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then -- $show "$mv $output_obj $lobj" -- if $run $mv $output_obj $lobj; then : -- else -- error=$? -- $run $rm $removelist -- exit $error -- fi -- fi - -- # Append the name of the PIC object to the libtool object file. -- test -z "$run" && cat >> ${libobj}T <&2 <<_LT_EOF -+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -+$progname: definition of this LT_INIT comes from an older release. -+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -+$progname: and run autoconf again. -+_LT_EOF -+ else -+ cat >&2 <<_LT_EOF -+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -+$progname: and run autoconf again. -+_LT_EOF - fi - else -- # No PIC object so indicate it doesn't exist in the libtool -- # object file. -- test -z "$run" && cat >> ${libobj}T <&2 <<_LT_EOF -+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -+$progname: but the definition of this LT_INIT comes from revision $macro_revision. -+$progname: You should recreate aclocal.m4 with macros from revision $package_revision -+$progname: of $PACKAGE $VERSION and run autoconf again. -+_LT_EOF - fi - -- # Only build a position-dependent object if we build old libraries. -- if test "$build_old_libs" = yes; then -- if test "$pic_mode" != yes; then -- # Don't build PIC code -- command="$base_compile $srcfile" -- else -- command="$base_compile $srcfile $pic_flag" -- fi -- if test "$compiler_c_o" = yes; then -- command="$command -o $obj" -- fi -+ exit $EXIT_MISMATCH -+ fi -+} - -- # Suppress compiler output if we already did a PIC compilation. -- command="$command$suppress_output" -- $run $rm "$obj" "$output_obj" -- $show "$command" -- if $run eval "$command"; then : -- else -- $run $rm $removelist -- exit $EXIT_FAILURE -- fi - -- if test "$need_locks" = warn && -- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then -- $echo "\ --*** ERROR, $lockfile contains: --`cat $lockfile 2>/dev/null` -+## ----------- ## -+## Main. ## -+## ----------- ## -+ -+$opt_help || { -+ # Sanity checks first: -+ func_check_version_match - --but it should contain: --$srcfile -+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then -+ func_fatal_configuration "not configured to build any kind of library" -+ fi - --This indicates that another process is trying to use the same --temporary object file, and libtool could not work around it because --your compiler does not support \`-c' and \`-o' together. If you --repeat this compilation, it may succeed, by chance, but you had better --avoid parallel builds (make -j) in this platform, or get a better --compiler." -+ test -z "$mode" && func_fatal_error "error: you must specify a MODE." - -- $run $rm $removelist -- exit $EXIT_FAILURE -- fi - -- # Just move the object if needed -- if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then -- $show "$mv $output_obj $obj" -- if $run $mv $output_obj $obj; then : -- else -- error=$? -- $run $rm $removelist -- exit $error -- fi -- fi -+ # Darwin sucks -+ eval std_shrext=\"$shrext_cmds\" - -- # Append the name of the non-PIC object the libtool object file. -- # Only append if the libtool object file exists. -- test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 -+ exit $EXIT_FAILURE -+ fi - --EOF -+ # Change the help message to a mode-specific one. -+ generic_help="$help" -+ help="Try \`$progname --help --mode=$mode' for more information." -+} -+ -+ -+# func_lalib_p file -+# True iff FILE is a libtool `.la' library or `.lo' object file. -+# This function is only a basic sanity check; it will hardly flush out -+# determined imposters. -+func_lalib_p () -+{ -+ test -f "$1" && -+ $SED -e 4q "$1" 2>/dev/null \ -+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 -+} -+ -+# func_lalib_unsafe_p file -+# True iff FILE is a libtool `.la' library or `.lo' object file. -+# This function implements the same check as func_lalib_p without -+# resorting to external programs. To this end, it redirects stdin and -+# closes it afterwards, without saving the original file descriptor. -+# As a safety measure, use it only where a negative result would be -+# fatal anyway. Works if `file' does not exist. -+func_lalib_unsafe_p () -+{ -+ lalib_p=no -+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then -+ for lalib_p_l in 1 2 3 4 -+ do -+ read lalib_p_line -+ case "$lalib_p_line" in -+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; -+ esac -+ done -+ exec 0<&5 5<&- - fi -+ test "$lalib_p" = yes -+} - -- $run $mv "${libobj}T" "${libobj}" -+# func_ltwrapper_script_p file -+# True iff FILE is a libtool wrapper script -+# This function is only a basic sanity check; it will hardly flush out -+# determined imposters. -+func_ltwrapper_script_p () -+{ -+ func_lalib_p "$1" -+} -+ -+# func_ltwrapper_executable_p file -+# True iff FILE is a libtool wrapper executable -+# This function is only a basic sanity check; it will hardly flush out -+# determined imposters. -+func_ltwrapper_executable_p () -+{ -+ func_ltwrapper_exec_suffix= -+ case $1 in -+ *.exe) ;; -+ *) func_ltwrapper_exec_suffix=.exe ;; -+ esac -+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 -+} - -- # Unlock the critical section if it was locked -- if test "$need_locks" != no; then -- $run $rm "$lockfile" -+# func_ltwrapper_scriptname file -+# Assumes file is an ltwrapper_executable -+# uses $file to determine the appropriate filename for a -+# temporary ltwrapper_script. -+func_ltwrapper_scriptname () -+{ -+ func_ltwrapper_scriptname_result="" -+ if func_ltwrapper_executable_p "$1"; then -+ func_dirname_and_basename "$1" "" "." -+ func_stripname '' '.exe' "$func_basename_result" -+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" - fi -+} - -- exit $EXIT_SUCCESS -- ;; -+# func_ltwrapper_p file -+# True iff FILE is a libtool wrapper script or wrapper executable -+# This function is only a basic sanity check; it will hardly flush out -+# determined imposters. -+func_ltwrapper_p () -+{ -+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" -+} - -- # libtool link mode -- link | relink) -- modename="$modename: link" -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -- # It is impossible to link a dll without this setting, and -- # we shouldn't force the makefile maintainer to figure out -- # which system we are compiling for in order to pass an extra -- # flag for every libtool invocation. -- # allow_undefined=no - -- # FIXME: Unfortunately, there are problems with the above when trying -- # to make a dll which has undefined symbols, in which case not -- # even a static library is built. For now, we need to specify -- # -no-undefined on the libtool link line when we can be certain -- # that all symbols are satisfied, otherwise we get a static library. -- allow_undefined=yes -- ;; -- *) -- allow_undefined=yes -- ;; -- esac -- libtool_args="$nonopt" -- base_compile="$nonopt $@" -- compile_command="$nonopt" -- finalize_command="$nonopt" -+# func_execute_cmds commands fail_cmd -+# Execute tilde-delimited COMMANDS. -+# If FAIL_CMD is given, eval that upon failure. -+# FAIL_CMD may read-access the current command in variable CMD! -+func_execute_cmds () -+{ -+ $opt_debug -+ save_ifs=$IFS; IFS='~' -+ for cmd in $1; do -+ IFS=$save_ifs -+ eval cmd=\"$cmd\" -+ func_show_eval "$cmd" "${2-:}" -+ done -+ IFS=$save_ifs -+} - -- compile_rpath= -- finalize_rpath= -- compile_shlibpath= -- finalize_shlibpath= -- convenience= -- old_convenience= -- deplibs= -- old_deplibs= -- compiler_flags= -- linker_flags= -- dllsearchpath= -- lib_search_path=`pwd` -- inst_prefix_dir= - -- avoid_version=no -- dlfiles= -- dlprefiles= -- dlself=no -- export_dynamic=no -- export_symbols= -- export_symbols_regex= -- generated= -- libobjs= -- ltlibs= -- module=no -- no_install=no -- objs= -- non_pic_objects= -- precious_files_regex= -- prefer_static_libs=no -- preload=no -- prev= -- prevarg= -- release= -- rpath= -- xrpath= -- perm_rpath= -- temp_rpath= -- thread_safe=no -- vinfo= -- vinfo_number=no -+# func_source file -+# Source FILE, adding directory component if necessary. -+# Note that it is not necessary on cygwin/mingw to append a dot to -+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe -+# behavior happens only for exec(3), not for open(2)! Also, sourcing -+# `FILE.' does not work on cygwin managed mounts. -+func_source () -+{ -+ $opt_debug -+ case $1 in -+ */* | *\\*) . "$1" ;; -+ *) . "./$1" ;; -+ esac -+} - -- func_infer_tag $base_compile - -- # We need to know -static, to get the right output filenames. -- for arg -- do -- case $arg in -- -all-static | -static) -- if test "X$arg" = "X-all-static"; then -- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then -- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 -- fi -- if test -n "$link_static_flag"; then -- dlopen_self=$dlopen_self_static -- fi -- else -- if test -z "$pic_flag" && test -n "$link_static_flag"; then -- dlopen_self=$dlopen_self_static -+# func_infer_tag arg -+# Infer tagged configuration to use if any are available and -+# if one wasn't chosen via the "--tag" command line option. -+# Only attempt this if the compiler in the base compile -+# command doesn't match the default compiler. -+# arg is usually of the form 'gcc ...' -+func_infer_tag () -+{ -+ $opt_debug -+ if test -n "$available_tags" && test -z "$tagname"; then -+ CC_quoted= -+ for arg in $CC; do -+ func_quote_for_eval "$arg" -+ CC_quoted="$CC_quoted $func_quote_for_eval_result" -+ done -+ case $@ in -+ # Blanks in the command may have been stripped by the calling shell, -+ # but not from the CC environment variable when configure was run. -+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; -+ # Blanks at the start of $base_compile will cause this to fail -+ # if we don't check for them as well. -+ *) -+ for z in $available_tags; do -+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then -+ # Evaluate the configuration. -+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" -+ CC_quoted= -+ for arg in $CC; do -+ # Double-quote args containing other shell metacharacters. -+ func_quote_for_eval "$arg" -+ CC_quoted="$CC_quoted $func_quote_for_eval_result" -+ done -+ case "$@ " in -+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) -+ # The compiler in the base compile command matches -+ # the one in the tagged configuration. -+ # Assume this is the tagged configuration we want. -+ tagname=$z -+ break -+ ;; -+ esac - fi -+ done -+ # If $tagname still isn't set, then no tagged configuration -+ # was found and let the user know that the "--tag" command -+ # line option must be used. -+ if test -z "$tagname"; then -+ func_echo "unable to infer tagged configuration" -+ func_fatal_error "specify a tag with \`--tag'" -+# else -+# func_verbose "using $tagname tagged configuration" - fi -- build_libtool_libs=no -- build_old_libs=yes -- prefer_static_libs=yes -- break - ;; - esac -- done -+ fi -+} - -- # See if our shared archives depend on static archives. -- test -n "$old_archive_from_new_cmds" && build_old_libs=yes - -- # Go through the arguments, transforming them on the way. -- while test "$#" -gt 0; do -- arg="$1" -- shift -- case $arg in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test -- ;; -- *) qarg=$arg ;; -- esac -- libtool_args="$libtool_args $qarg" - -- # If the previous option needs an argument, assign it. -- if test -n "$prev"; then -- case $prev in -- output) -- compile_command="$compile_command @OUTPUT@" -- finalize_command="$finalize_command @OUTPUT@" -- ;; -- esac -+# func_write_libtool_object output_name pic_name nonpic_name -+# Create a libtool object file (analogous to a ".la" file), -+# but don't create it if we're doing a dry run. -+func_write_libtool_object () -+{ -+ write_libobj=${1} -+ if test "$build_libtool_libs" = yes; then -+ write_lobj=\'${2}\' -+ else -+ write_lobj=none -+ fi - -- case $prev in -- dlfiles|dlprefiles) -- if test "$preload" = no; then -- # Add the symbol object into the linking commands. -- compile_command="$compile_command @SYMFILE@" -- finalize_command="$finalize_command @SYMFILE@" -- preload=yes -- fi -- case $arg in -- *.la | *.lo) ;; # We handle these cases below. -- force) -- if test "$dlself" = no; then -- dlself=needless -- export_dynamic=yes -- fi -- prev= -- continue -- ;; -- self) -- if test "$prev" = dlprefiles; then -- dlself=yes -- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then -- dlself=yes -- else -- dlself=needless -- export_dynamic=yes -- fi -- prev= -- continue -- ;; -- *) -- if test "$prev" = dlfiles; then -- dlfiles="$dlfiles $arg" -- else -- dlprefiles="$dlprefiles $arg" -- fi -- prev= -- continue -- ;; -- esac -- ;; -- expsyms) -- export_symbols="$arg" -- if test ! -f "$arg"; then -- $echo "$modename: symbol file \`$arg' does not exist" -- exit $EXIT_FAILURE -- fi -- prev= -- continue -- ;; -- expsyms_regex) -- export_symbols_regex="$arg" -- prev= -- continue -- ;; -- inst_prefix) -- inst_prefix_dir="$arg" -- prev= -- continue -- ;; -- precious_regex) -- precious_files_regex="$arg" -- prev= -- continue -- ;; -- release) -- release="-$arg" -- prev= -- continue -- ;; -- objectlist) -- if test -f "$arg"; then -- save_arg=$arg -- moreargs= -- for fil in `cat $save_arg` -- do --# moreargs="$moreargs $fil" -- arg=$fil -- # A libtool-controlled object. -- -- # Check to see that this really is a libtool object. -- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -- pic_object= -- non_pic_object= -- -- # Read the .lo file -- # If there is no directory component, then add one. -- case $arg in -- */* | *\\*) . $arg ;; -- *) . ./$arg ;; -- esac -- -- if test -z "$pic_object" || \ -- test -z "$non_pic_object" || -- test "$pic_object" = none && \ -- test "$non_pic_object" = none; then -- $echo "$modename: cannot find name of object for \`$arg'" 1>&2 -- exit $EXIT_FAILURE -- fi -- -- # Extract subdirectory from the argument. -- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$xdir" = "X$arg"; then -- xdir= -- else -- xdir="$xdir/" -- fi -+ if test "$build_old_libs" = yes; then -+ write_oldobj=\'${3}\' -+ else -+ write_oldobj=none -+ fi - -- if test "$pic_object" != none; then -- # Prepend the subdirectory the object is found in. -- pic_object="$xdir$pic_object" -+ $opt_dry_run || { -+ cat >${write_libobj}T <&2 -- exit $EXIT_FAILURE -- else -- # Dry-run case. -+ for arg -+ do -+ case $arg_mode in -+ arg ) -+ # do not "continue". Instead, add this to base_compile -+ lastarg="$arg" -+ arg_mode=normal -+ ;; - -- # Extract subdirectory from the argument. -- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$xdir" = "X$arg"; then -- xdir= -- else -- xdir="$xdir/" -- fi -+ target ) -+ libobj="$arg" -+ arg_mode=normal -+ continue -+ ;; - -- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` -- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` -- libobjs="$libobjs $pic_object" -- non_pic_objects="$non_pic_objects $non_pic_object" -- fi -- fi -- done -- else -- $echo "$modename: link input file \`$save_arg' does not exist" -- exit $EXIT_FAILURE -- fi -- arg=$save_arg -- prev= -- continue -- ;; -- rpath | xrpath) -- # We need an absolute path. -- case $arg in -- [\\/]* | [A-Za-z]:[\\/]*) ;; -- *) -- $echo "$modename: only absolute run-paths are allowed" 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -- if test "$prev" = rpath; then -- case "$rpath " in -- *" $arg "*) ;; -- *) rpath="$rpath $arg" ;; -- esac -- else -- case "$xrpath " in -- *" $arg "*) ;; -- *) xrpath="$xrpath $arg" ;; -- esac -- fi -- prev= -+ normal ) -+ # Accept any command-line options. -+ case $arg in -+ -o) -+ test -n "$libobj" && \ -+ func_fatal_error "you cannot specify \`-o' more than once" -+ arg_mode=target - continue - ;; -- xcompiler) -- compiler_flags="$compiler_flags $qarg" -- prev= -- compile_command="$compile_command $qarg" -- finalize_command="$finalize_command $qarg" -+ -+ -pie | -fpie | -fPIE) -+ pie_flag="$pie_flag $arg" - continue - ;; -- xlinker) -- linker_flags="$linker_flags $qarg" -- compiler_flags="$compiler_flags $wl$qarg" -- prev= -- compile_command="$compile_command $wl$qarg" -- finalize_command="$finalize_command $wl$qarg" -+ -+ -shared | -static | -prefer-pic | -prefer-non-pic) -+ later="$later $arg" - continue - ;; -- xcclinker) -- linker_flags="$linker_flags $qarg" -- compiler_flags="$compiler_flags $qarg" -- prev= -- compile_command="$compile_command $qarg" -- finalize_command="$finalize_command $qarg" -+ -+ -no-suppress) -+ suppress_opt=no - continue - ;; -- shrext) -- shrext_cmds="$arg" -- prev= -+ -+ -Xcompiler) -+ arg_mode=arg # the next one goes into the "base_compile" arg list -+ continue # The current "srcfile" will either be retained or -+ ;; # replaced later. I would guess that would be a bug. -+ -+ -Wc,*) -+ func_stripname '-Wc,' '' "$arg" -+ args=$func_stripname_result -+ lastarg= -+ save_ifs="$IFS"; IFS=',' -+ for arg in $args; do -+ IFS="$save_ifs" -+ func_quote_for_eval "$arg" -+ lastarg="$lastarg $func_quote_for_eval_result" -+ done -+ IFS="$save_ifs" -+ func_stripname ' ' '' "$lastarg" -+ lastarg=$func_stripname_result -+ -+ # Add the arguments to base_compile. -+ base_compile="$base_compile $lastarg" - continue - ;; -+ - *) -- eval "$prev=\"\$arg\"" -- prev= -- continue -+ # Accept the current argument as the source file. -+ # The previous "srcfile" becomes the current argument. -+ # -+ lastarg="$srcfile" -+ srcfile="$arg" - ;; -- esac -- fi # test -n "$prev" -- -- prevarg="$arg" -- -- case $arg in -- -all-static) -- if test -n "$link_static_flag"; then -- compile_command="$compile_command $link_static_flag" -- finalize_command="$finalize_command $link_static_flag" -- fi -- continue -- ;; -- -- -allow-undefined) -- # FIXME: remove this flag sometime in the future. -- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 -- continue -+ esac # case $arg - ;; -+ esac # case $arg_mode - -- -avoid-version) -- avoid_version=yes -- continue -- ;; -+ # Aesthetically quote the previous argument. -+ func_quote_for_eval "$lastarg" -+ base_compile="$base_compile $func_quote_for_eval_result" -+ done # for arg - -- -dlopen) -- prev=dlfiles -- continue -- ;; -+ case $arg_mode in -+ arg) -+ func_fatal_error "you must specify an argument for -Xcompile" -+ ;; -+ target) -+ func_fatal_error "you must specify a target with \`-o'" -+ ;; -+ *) -+ # Get the name of the library object. -+ test -z "$libobj" && { -+ func_basename "$srcfile" -+ libobj="$func_basename_result" -+ } -+ ;; -+ esac - -- -dlpreopen) -- prev=dlprefiles -- continue -- ;; -+ # Recognize several different file suffixes. -+ # If the user specifies -o file.o, it is replaced with file.lo -+ case $libobj in -+ *.[cCFSifmso] | \ -+ *.ada | *.adb | *.ads | *.asm | \ -+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ -+ *.[fF][09]? | *.for | *.java | *.obj | *.sx) -+ func_xform "$libobj" -+ libobj=$func_xform_result -+ ;; -+ esac - -- -export-dynamic) -- export_dynamic=yes -- continue -- ;; -+ case $libobj in -+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; -+ *) -+ func_fatal_error "cannot determine name of library object from \`$libobj'" -+ ;; -+ esac - -- -export-symbols | -export-symbols-regex) -- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then -- $echo "$modename: more than one -exported-symbols argument is not allowed" -- exit $EXIT_FAILURE -- fi -- if test "X$arg" = "X-export-symbols"; then -- prev=expsyms -- else -- prev=expsyms_regex -- fi -- continue -- ;; -+ func_infer_tag $base_compile - -- -inst-prefix-dir) -- prev=inst_prefix -+ for arg in $later; do -+ case $arg in -+ -shared) -+ test "$build_libtool_libs" != yes && \ -+ func_fatal_configuration "can not build a shared library" -+ build_old_libs=no - continue - ;; - -- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* -- # so, if we see these flags be careful not to treat them like -L -- -L[A-Z][A-Z]*:*) -- case $with_gcc/$host in -- no/*-*-irix* | /*-*-irix*) -- compile_command="$compile_command $arg" -- finalize_command="$finalize_command $arg" -- ;; -- esac -+ -static) -+ build_libtool_libs=no -+ build_old_libs=yes - continue - ;; - -- -L*) -- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` -- # We need an absolute path. -- case $dir in -- [\\/]* | [A-Za-z]:[\\/]*) ;; -- *) -- absdir=`cd "$dir" && pwd` -- if test -z "$absdir"; then -- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 -- exit $EXIT_FAILURE -- fi -- dir="$absdir" -- ;; -- esac -- case "$deplibs " in -- *" -L$dir "*) ;; -- *) -- deplibs="$deplibs -L$dir" -- lib_search_path="$lib_search_path $dir" -- ;; -- esac -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -- case :$dllsearchpath: in -- *":$dir:"*) ;; -- *) dllsearchpath="$dllsearchpath:$dir";; -- esac -- ;; -- esac -+ -prefer-pic) -+ pic_mode=yes - continue - ;; - -- -l*) -- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then -- case $host in -- *-*-cygwin* | *-*-pw32* | *-*-beos*) -- # These systems don't actually have a C or math library (as such) -- continue -- ;; -- *-*-mingw* | *-*-os2*) -- # These systems don't actually have a C library (as such) -- test "X$arg" = "X-lc" && continue -- ;; -- *-*-openbsd* | *-*-freebsd*) -- # Do not include libc due to us having libc/libc_r. -- test "X$arg" = "X-lc" && continue -- ;; -- *-*-rhapsody* | *-*-darwin1.[012]) -- # Rhapsody C and math libraries are in the System framework -- deplibs="$deplibs -framework System" -- continue -- esac -- elif test "X$arg" = "X-lc_r"; then -- case $host in -- *-*-openbsd* | *-*-freebsd*) -- # Do not include libc_r directly, use -pthread flag. -- continue -- ;; -- esac -- fi -- deplibs="$deplibs $arg" -+ -prefer-non-pic) -+ pic_mode=no - continue - ;; -+ esac -+ done - -- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) -- deplibs="$deplibs $arg" -- continue -- ;; -+ func_quote_for_eval "$libobj" -+ test "X$libobj" != "X$func_quote_for_eval_result" \ -+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ -+ && func_warning "libobj name \`$libobj' may not contain shell special characters." -+ func_dirname_and_basename "$obj" "/" "" -+ objname="$func_basename_result" -+ xdir="$func_dirname_result" -+ lobj=${xdir}$objdir/$objname - -- -module) -- module=yes -- continue -- ;; -+ test -z "$base_compile" && \ -+ func_fatal_help "you must specify a compilation command" - -- # gcc -m* arguments should be passed to the linker via $compiler_flags -- # in order to pass architecture information to the linker -- # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo -- # but this is not reliable with gcc because gcc may use -mfoo to -- # select a different linker, different libraries, etc, while -- # -Wl,-mfoo simply passes -mfoo to the linker. -- -m*) -- # Unknown arguments in both finalize_command and compile_command need -- # to be aesthetically quoted because they are evaled later. -- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -- case $arg in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- arg="\"$arg\"" -- ;; -- esac -- compile_command="$compile_command $arg" -- finalize_command="$finalize_command $arg" -- if test "$with_gcc" = "yes" ; then -- compiler_flags="$compiler_flags $arg" -- fi -- continue -- ;; -+ # Delete any leftover library objects. -+ if test "$build_old_libs" = yes; then -+ removelist="$obj $lobj $libobj ${libobj}T" -+ else -+ removelist="$lobj $libobj ${libobj}T" -+ fi - -- -shrext) -- prev=shrext -- continue -- ;; -+ # On Cygwin there's no "real" PIC flag so we must build both object types -+ case $host_os in -+ cygwin* | mingw* | pw32* | os2* | cegcc*) -+ pic_mode=default -+ ;; -+ esac -+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then -+ # non-PIC code in shared libraries is not supported -+ pic_mode=default -+ fi - -- -no-fast-install) -- fast_install=no -- continue -- ;; -+ # Calculate the filename of the output object if compiler does -+ # not support -o with -c -+ if test "$compiler_c_o" = no; then -+ output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} -+ lockfile="$output_obj.lock" -+ else -+ output_obj= -+ need_locks=no -+ lockfile= -+ fi - -- -no-install) -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -- # The PATH hackery in wrapper scripts is required on Windows -- # in order for the loader to find any dlls it needs. -- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 -- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 -- fast_install=no -- ;; -- *) no_install=yes ;; -- esac -- continue -- ;; -+ # Lock this critical section if it is needed -+ # We use this script file to make the link, it avoids creating a new file -+ if test "$need_locks" = yes; then -+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do -+ func_echo "Waiting for $lockfile to be removed" -+ sleep 2 -+ done -+ elif test "$need_locks" = warn; then -+ if test -f "$lockfile"; then -+ $ECHO "\ -+*** ERROR, $lockfile exists and contains: -+`cat $lockfile 2>/dev/null` - -- -no-undefined) -- allow_undefined=no -- continue -- ;; -+This indicates that another process is trying to use the same -+temporary object file, and libtool could not work around it because -+your compiler does not support \`-c' and \`-o' together. If you -+repeat this compilation, it may succeed, by chance, but you had better -+avoid parallel builds (make -j) in this platform, or get a better -+compiler." - -- -objectlist) -- prev=objectlist -- continue -- ;; -+ $opt_dry_run || $RM $removelist -+ exit $EXIT_FAILURE -+ fi -+ removelist="$removelist $output_obj" -+ $ECHO "$srcfile" > "$lockfile" -+ fi - -- -o) prev=output ;; -+ $opt_dry_run || $RM $removelist -+ removelist="$removelist $lockfile" -+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - -- -precious-files-regex) -- prev=precious_regex -- continue -- ;; -+ if test -n "$fix_srcfile_path"; then -+ eval srcfile=\"$fix_srcfile_path\" -+ fi -+ func_quote_for_eval "$srcfile" -+ qsrcfile=$func_quote_for_eval_result - -- -release) -- prev=release -- continue -- ;; -+ # Only build a PIC object if we are building libtool libraries. -+ if test "$build_libtool_libs" = yes; then -+ # Without this assignment, base_compile gets emptied. -+ fbsd_hideous_sh_bug=$base_compile - -- -rpath) -- prev=rpath -- continue -- ;; -+ if test "$pic_mode" != no; then -+ command="$base_compile $qsrcfile $pic_flag" -+ else -+ # Don't build PIC code -+ command="$base_compile $qsrcfile" -+ fi - -- -R) -- prev=xrpath -- continue -- ;; -+ func_mkdir_p "$xdir$objdir" - -- -R*) -- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` -- # We need an absolute path. -- case $dir in -- [\\/]* | [A-Za-z]:[\\/]*) ;; -- *) -- $echo "$modename: only absolute run-paths are allowed" 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -- case "$xrpath " in -- *" $dir "*) ;; -- *) xrpath="$xrpath $dir" ;; -- esac -- continue -- ;; -+ if test -z "$output_obj"; then -+ # Place PIC objects in $objdir -+ command="$command -o $lobj" -+ fi - -- -static) -- # The effects of -static are defined in a previous loop. -- # We used to do the same as -all-static on platforms that -- # didn't have a PIC flag, but the assumption that the effects -- # would be equivalent was wrong. It would break on at least -- # Digital Unix and AIX. -- continue -- ;; -+ func_show_eval_locale "$command" \ -+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - -- -thread-safe) -- thread_safe=yes -- continue -- ;; -+ if test "$need_locks" = warn && -+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then -+ $ECHO "\ -+*** ERROR, $lockfile contains: -+`cat $lockfile 2>/dev/null` - -- -version-info) -- prev=vinfo -- continue -- ;; -- -version-number) -- prev=vinfo -- vinfo_number=yes -- continue -- ;; -+but it should contain: -+$srcfile - -- -Wc,*) -- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` -- arg= -- save_ifs="$IFS"; IFS=',' -- for flag in $args; do -- IFS="$save_ifs" -- case $flag in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- flag="\"$flag\"" -- ;; -- esac -- arg="$arg $wl$flag" -- compiler_flags="$compiler_flags $flag" -- done -- IFS="$save_ifs" -- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` -- ;; -+This indicates that another process is trying to use the same -+temporary object file, and libtool could not work around it because -+your compiler does not support \`-c' and \`-o' together. If you -+repeat this compilation, it may succeed, by chance, but you had better -+avoid parallel builds (make -j) in this platform, or get a better -+compiler." - -- -Wl,*) -- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` -- arg= -- save_ifs="$IFS"; IFS=',' -- for flag in $args; do -- IFS="$save_ifs" -- case $flag in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- flag="\"$flag\"" -- ;; -- esac -- arg="$arg $wl$flag" -- compiler_flags="$compiler_flags $wl$flag" -- linker_flags="$linker_flags $flag" -- done -- IFS="$save_ifs" -- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` -- ;; -+ $opt_dry_run || $RM $removelist -+ exit $EXIT_FAILURE -+ fi - -- -Xcompiler) -- prev=xcompiler -- continue -- ;; -+ # Just move the object if needed, then go on to compile the next one -+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then -+ func_show_eval '$MV "$output_obj" "$lobj"' \ -+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' -+ fi - -- -Xlinker) -- prev=xlinker -- continue -- ;; -+ # Allow error messages only from the first compilation. -+ if test "$suppress_opt" = yes; then -+ suppress_output=' >/dev/null 2>&1' -+ fi -+ fi - -- -XCClinker) -- prev=xcclinker -- continue -- ;; -+ # Only build a position-dependent object if we build old libraries. -+ if test "$build_old_libs" = yes; then -+ if test "$pic_mode" != yes; then -+ # Don't build PIC code -+ command="$base_compile $qsrcfile$pie_flag" -+ else -+ command="$base_compile $qsrcfile $pic_flag" -+ fi -+ if test "$compiler_c_o" = yes; then -+ command="$command -o $obj" -+ fi - -- # Some other compiler flag. -- -* | +*) -- # Unknown arguments in both finalize_command and compile_command need -- # to be aesthetically quoted because they are evaled later. -- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -- case $arg in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- arg="\"$arg\"" -- ;; -- esac -- ;; -+ # Suppress compiler output if we already did a PIC compilation. -+ command="$command$suppress_output" -+ func_show_eval_locale "$command" \ -+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - -- *.$objext) -- # A standard object. -- objs="$objs $arg" -- ;; -+ if test "$need_locks" = warn && -+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then -+ $ECHO "\ -+*** ERROR, $lockfile contains: -+`cat $lockfile 2>/dev/null` - -- *.lo) -- # A libtool-controlled object. -+but it should contain: -+$srcfile - -- # Check to see that this really is a libtool object. -- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -- pic_object= -- non_pic_object= -+This indicates that another process is trying to use the same -+temporary object file, and libtool could not work around it because -+your compiler does not support \`-c' and \`-o' together. If you -+repeat this compilation, it may succeed, by chance, but you had better -+avoid parallel builds (make -j) in this platform, or get a better -+compiler." - -- # Read the .lo file -- # If there is no directory component, then add one. -- case $arg in -- */* | *\\*) . $arg ;; -- *) . ./$arg ;; -- esac -+ $opt_dry_run || $RM $removelist -+ exit $EXIT_FAILURE -+ fi - -- if test -z "$pic_object" || \ -- test -z "$non_pic_object" || -- test "$pic_object" = none && \ -- test "$non_pic_object" = none; then -- $echo "$modename: cannot find name of object for \`$arg'" 1>&2 -- exit $EXIT_FAILURE -- fi -+ # Just move the object if needed -+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then -+ func_show_eval '$MV "$output_obj" "$obj"' \ -+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' -+ fi -+ fi - -- # Extract subdirectory from the argument. -- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$xdir" = "X$arg"; then -- xdir= -- else -- xdir="$xdir/" -- fi -+ $opt_dry_run || { -+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" - -- if test "$pic_object" != none; then -- # Prepend the subdirectory the object is found in. -- pic_object="$xdir$pic_object" -+ # Unlock the critical section if it was locked -+ if test "$need_locks" != no; then -+ removelist=$lockfile -+ $RM "$lockfile" -+ fi -+ } - -- if test "$prev" = dlfiles; then -- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -- dlfiles="$dlfiles $pic_object" -- prev= -- continue -- else -- # If libtool objects are unsupported, then we need to preload. -- prev=dlprefiles -- fi -- fi -+ exit $EXIT_SUCCESS -+} - -- # CHECK ME: I think I busted this. -Ossama -- if test "$prev" = dlprefiles; then -- # Preload the old-style object. -- dlprefiles="$dlprefiles $pic_object" -- prev= -- fi -+$opt_help || { -+test "$mode" = compile && func_mode_compile ${1+"$@"} -+} - -- # A PIC object. -- libobjs="$libobjs $pic_object" -- arg="$pic_object" -- fi -+func_mode_help () -+{ -+ # We need to display help for each of the modes. -+ case $mode in -+ "") -+ # Generic help is extracted from the usage comments -+ # at the start of this file. -+ func_help -+ ;; - -- # Non-PIC object. -- if test "$non_pic_object" != none; then -- # Prepend the subdirectory the object is found in. -- non_pic_object="$xdir$non_pic_object" -+ clean) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -- # A standard non-PIC object -- non_pic_objects="$non_pic_objects $non_pic_object" -- if test -z "$pic_object" || test "$pic_object" = none ; then -- arg="$non_pic_object" -- fi -- fi -- else -- # Only an error if not doing a dry-run. -- if test -z "$run"; then -- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 -- exit $EXIT_FAILURE -- else -- # Dry-run case. -+Remove files from the build directory. - -- # Extract subdirectory from the argument. -- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$xdir" = "X$arg"; then -- xdir= -- else -- xdir="$xdir/" -- fi -+RM is the name of the program to use to delete files associated with each FILE -+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -+to RM. - -- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` -- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` -- libobjs="$libobjs $pic_object" -- non_pic_objects="$non_pic_objects $non_pic_object" -- fi -- fi -- ;; -+If FILE is a libtool library, object or program, all the files associated -+with it are deleted. Otherwise, only FILE itself is deleted using RM." -+ ;; - -- *.$libext) -- # An archive. -- deplibs="$deplibs $arg" -- old_deplibs="$old_deplibs $arg" -- continue -- ;; -+ compile) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -- *.la) -- # A libtool-controlled library. -+Compile a source file into a libtool library object. - -- if test "$prev" = dlfiles; then -- # This library was specified with -dlopen. -- dlfiles="$dlfiles $arg" -- prev= -- elif test "$prev" = dlprefiles; then -- # The library was specified with -dlpreopen. -- dlprefiles="$dlprefiles $arg" -- prev= -- else -- deplibs="$deplibs $arg" -- fi -- continue -- ;; -+This mode accepts the following additional options: - -- # Some other compiler argument. -- *) -- # Unknown arguments in both finalize_command and compile_command need -- # to be aesthetically quoted because they are evaled later. -- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -- case $arg in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- arg="\"$arg\"" -- ;; -- esac -- ;; -- esac # arg -+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE -+ -no-suppress do not suppress compiler output for multiple passes -+ -prefer-pic try to building PIC objects only -+ -prefer-non-pic try to building non-PIC objects only -+ -shared do not build a \`.o' file suitable for static linking -+ -static only build a \`.o' file suitable for static linking - -- # Now actually substitute the argument into the commands. -- if test -n "$arg"; then -- compile_command="$compile_command $arg" -- finalize_command="$finalize_command $arg" -- fi -- done # argument parsing loop -+COMPILE-COMMAND is a command to be used in creating a \`standard' object file -+from the given SOURCEFILE. - -- if test -n "$prev"; then -- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- fi -+The output file name is determined by removing the directory component from -+SOURCEFILE, then substituting the C source code suffix \`.c' with the -+library object suffix, \`.lo'." -+ ;; - -- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then -- eval arg=\"$export_dynamic_flag_spec\" -- compile_command="$compile_command $arg" -- finalize_command="$finalize_command $arg" -- fi -+ execute) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... - -- oldlibs= -- # calculate the name of the file, without its directory -- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` -- libobjs_save="$libobjs" -+Automatically set library path, then run a program. - -- if test -n "$shlibpath_var"; then -- # get the directories listed in $shlibpath_var -- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` -- else -- shlib_search_path= -- fi -- eval sys_lib_search_path=\"$sys_lib_search_path_spec\" -- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" -+This mode accepts the following additional options: - -- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$output_objdir" = "X$output"; then -- output_objdir="$objdir" -- else -- output_objdir="$output_objdir/$objdir" -- fi -- # Create the object directory. -- if test ! -d "$output_objdir"; then -- $show "$mkdir $output_objdir" -- $run $mkdir $output_objdir -- status=$? -- if test "$status" -ne 0 && test ! -d "$output_objdir"; then -- exit $status -- fi -- fi -+ -dlopen FILE add the directory containing FILE to the library path - -- # Determine the type of output -- case $output in -- "") -- $echo "$modename: you must specify an output file" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- ;; -- *.$libext) linkmode=oldlib ;; -- *.lo | *.$objext) linkmode=obj ;; -- *.la) linkmode=lib ;; -- *) linkmode=prog ;; # Anything else should be a program. -- esac -+This mode sets the library path environment variable according to \`-dlopen' -+flags. - -- case $host in -- *cygwin* | *mingw* | *pw32*) -- # don't eliminate duplications in $postdeps and $predeps -- duplicate_compiler_generated_deps=yes -- ;; -- *) -- duplicate_compiler_generated_deps=$duplicate_deps -- ;; -- esac -- specialdeplibs= -+If any of the ARGS are libtool executable wrappers, then they are translated -+into their corresponding uninstalled binary, and any of their required library -+directories are added to the library path. - -- libs= -- # Find all interdependent deplibs by searching for libraries -- # that are linked more than once (e.g. -la -lb -la) -- for deplib in $deplibs; do -- if test "X$duplicate_deps" = "Xyes" ; then -- case "$libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- fi -- libs="$libs $deplib" -- done -+Then, COMMAND is executed, with ARGS as arguments." -+ ;; - -- if test "$linkmode" = lib; then -- libs="$predeps $libs $compiler_lib_search_path $postdeps" -+ finish) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... - -- # Compute libraries that are listed more than once in $predeps -- # $postdeps and mark them as special (i.e., whose duplicates are -- # not to be eliminated). -- pre_post_deps= -- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then -- for pre_post_dep in $predeps $postdeps; do -- case "$pre_post_deps " in -- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; -- esac -- pre_post_deps="$pre_post_deps $pre_post_dep" -- done -- fi -- pre_post_deps= -- fi -+Complete the installation of libtool libraries. - -- deplibs= -- newdependency_libs= -- newlib_search_path= -- need_relink=no # whether we're linking any uninstalled libtool libraries -- notinst_deplibs= # not-installed libtool libraries -- notinst_path= # paths that contain not-installed libtool libraries -- case $linkmode in -- lib) -- passes="conv link" -- for file in $dlfiles $dlprefiles; do -- case $file in -- *.la) ;; -- *) -- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -- done -- ;; -- prog) -- compile_deplibs= -- finalize_deplibs= -- alldeplibs=no -- newdlfiles= -- newdlprefiles= -- passes="conv scan dlopen dlpreopen link" -- ;; -- *) passes="conv" -- ;; -- esac -- for pass in $passes; do -- if test "$linkmode,$pass" = "lib,link" || -- test "$linkmode,$pass" = "prog,scan"; then -- libs="$deplibs" -- deplibs= -- fi -- if test "$linkmode" = prog; then -- case $pass in -- dlopen) libs="$dlfiles" ;; -- dlpreopen) libs="$dlprefiles" ;; -- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; -- esac -- fi -- if test "$pass" = dlopen; then -- # Collect dlpreopened libraries -- save_deplibs="$deplibs" -- deplibs= -- fi -- for deplib in $libs; do -- lib= -- found=no -- case $deplib in -- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) -- if test "$linkmode,$pass" = "prog,link"; then -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- else -- deplibs="$deplib $deplibs" -- fi -- continue -- ;; -- -l*) -- if test "$linkmode" != lib && test "$linkmode" != prog; then -- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 -- continue -- fi -- if test "$pass" = conv; then -- deplibs="$deplib $deplibs" -- continue -- fi -- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` -- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do -- for search_ext in .la $std_shrext .so .a; do -- # Search the libtool library -- lib="$searchdir/lib${name}${search_ext}" -- if test -f "$lib"; then -- if test "$search_ext" = ".la"; then -- found=yes -- else -- found=no -- fi -- break 2 -- fi -- done -- done -- if test "$found" != yes; then -- # deplib doesn't seem to be a libtool library -- if test "$linkmode,$pass" = "prog,link"; then -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- else -- deplibs="$deplib $deplibs" -- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" -- fi -- continue -- else # deplib is a libtool library -- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, -- # We need to do some special things here, and not later. -- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -- case " $predeps $postdeps " in -- *" $deplib "*) -- if (${SED} -e '2q' $lib | -- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -- library_names= -- old_library= -- case $lib in -- */* | *\\*) . $lib ;; -- *) . ./$lib ;; -- esac -- for l in $old_library $library_names; do -- ll="$l" -- done -- if test "X$ll" = "X$old_library" ; then # only static version available -- found=no -- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` -- test "X$ladir" = "X$lib" && ladir="." -- lib=$ladir/$old_library -- if test "$linkmode,$pass" = "prog,link"; then -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- else -- deplibs="$deplib $deplibs" -- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" -- fi -- continue -- fi -- fi -- ;; -- *) ;; -- esac -- fi -- fi -- ;; # -l -- -L*) -- case $linkmode in -- lib) -- deplibs="$deplib $deplibs" -- test "$pass" = conv && continue -- newdependency_libs="$deplib $newdependency_libs" -- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` -- ;; -- prog) -- if test "$pass" = conv; then -- deplibs="$deplib $deplibs" -- continue -- fi -- if test "$pass" = scan; then -- deplibs="$deplib $deplibs" -- else -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- fi -- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` -- ;; -- *) -- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 -- ;; -- esac # linkmode -- continue -- ;; # -L -- -R*) -- if test "$pass" = link; then -- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` -- # Make sure the xrpath contains only unique directories. -- case "$xrpath " in -- *" $dir "*) ;; -- *) xrpath="$xrpath $dir" ;; -- esac -- fi -- deplibs="$deplib $deplibs" -- continue -- ;; -- *.la) lib="$deplib" ;; -- *.$libext) -- if test "$pass" = conv; then -- deplibs="$deplib $deplibs" -- continue -- fi -- case $linkmode in -- lib) -- if test "$deplibs_check_method" != pass_all; then -- $echo -- $echo "*** Warning: Trying to link with static lib archive $deplib." -- $echo "*** I have the capability to make that library automatically link in when" -- $echo "*** you link to this library. But I can only do this if you have a" -- $echo "*** shared version of the library, which you do not appear to have" -- $echo "*** because the file extensions .$libext of this argument makes me believe" -- $echo "*** that it is just a static archive that I should not used here." -- else -- $echo -- $echo "*** Warning: Linking the shared library $output against the" -- $echo "*** static library $deplib is not portable!" -- deplibs="$deplib $deplibs" -- fi -- continue -- ;; -- prog) -- if test "$pass" != link; then -- deplibs="$deplib $deplibs" -- else -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- fi -- continue -- ;; -- esac # linkmode -- ;; # *.$libext -- *.lo | *.$objext) -- if test "$pass" = conv; then -- deplibs="$deplib $deplibs" -- elif test "$linkmode" = prog; then -- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then -- # If there is no dlopen support or we're linking statically, -- # we need to preload. -- newdlprefiles="$newdlprefiles $deplib" -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- else -- newdlfiles="$newdlfiles $deplib" -- fi -- fi -- continue -- ;; -- %DEPLIBS%) -- alldeplibs=yes -- continue -- ;; -- esac # case $deplib -- if test "$found" = yes || test -f "$lib"; then : -- else -- $echo "$modename: cannot find the library \`$lib'" 1>&2 -- exit $EXIT_FAILURE -- fi -+Each LIBDIR is a directory that contains libtool libraries. - -- # Check to see that this really is a libtool archive. -- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : -- else -- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -- exit $EXIT_FAILURE -- fi -+The commands that this mode executes may require superuser privileges. Use -+the \`--dry-run' option if you just want to see what would be executed." -+ ;; - -- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` -- test "X$ladir" = "X$lib" && ladir="." -+ install) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... - -- dlname= -- dlopen= -- dlpreopen= -- libdir= -- library_names= -- old_library= -- # If the library was installed with an old release of libtool, -- # it will not redefine variables installed, or shouldnotlink -- installed=yes -- shouldnotlink=no -+Install executables or libraries. - -- # Read the .la file -- case $lib in -- */* | *\\*) . $lib ;; -- *) . ./$lib ;; -- esac -+INSTALL-COMMAND is the installation command. The first component should be -+either the \`install' or \`cp' program. - -- if test "$linkmode,$pass" = "lib,link" || -- test "$linkmode,$pass" = "prog,scan" || -- { test "$linkmode" != prog && test "$linkmode" != lib; }; then -- test -n "$dlopen" && dlfiles="$dlfiles $dlopen" -- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" -- fi -+The following components of INSTALL-COMMAND are treated specially: - -- if test "$pass" = conv; then -- # Only check for convenience libraries -- deplibs="$lib $deplibs" -- if test -z "$libdir"; then -- if test -z "$old_library"; then -- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 -- exit $EXIT_FAILURE -- fi -- # It is a libtool convenience library, so add in its objects. -- convenience="$convenience $ladir/$objdir/$old_library" -- old_convenience="$old_convenience $ladir/$objdir/$old_library" -- tmp_libs= -- for deplib in $dependency_libs; do -- deplibs="$deplib $deplibs" -- if test "X$duplicate_deps" = "Xyes" ; then -- case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- fi -- tmp_libs="$tmp_libs $deplib" -- done -- elif test "$linkmode" != prog && test "$linkmode" != lib; then -- $echo "$modename: \`$lib' is not a convenience library" 1>&2 -- exit $EXIT_FAILURE -- fi -- continue -- fi # $pass = conv -+ -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation - -+The rest of the components are interpreted as arguments to that command (only -+BSD-compatible install options are recognized)." -+ ;; - -- # Get the name of the library we link against. -- linklib= -- for l in $old_library $library_names; do -- linklib="$l" -- done -- if test -z "$linklib"; then -- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 -- exit $EXIT_FAILURE -- fi -+ link) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... - -- # This library was specified with -dlopen. -- if test "$pass" = dlopen; then -- if test -z "$libdir"; then -- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 -- exit $EXIT_FAILURE -- fi -- if test -z "$dlname" || -- test "$dlopen_support" != yes || -- test "$build_libtool_libs" = no; then -- # If there is no dlname, no dlopen support or we're linking -- # statically, we need to preload. We also need to preload any -- # dependent libraries so libltdl's deplib preloader doesn't -- # bomb out in the load deplibs phase. -- dlprefiles="$dlprefiles $lib $dependency_libs" -- else -- newdlfiles="$newdlfiles $lib" -- fi -- continue -- fi # $pass = dlopen -+Link object files or libraries together to form another library, or to -+create an executable program. - -- # We need an absolute path. -- case $ladir in -- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; -- *) -- abs_ladir=`cd "$ladir" && pwd` -- if test -z "$abs_ladir"; then -- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 -- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 -- abs_ladir="$ladir" -- fi -- ;; -- esac -- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` -+LINK-COMMAND is a command using the C compiler that you would use to create -+a program from several object files. - -- # Find the relevant object directory and library name. -- if test "X$installed" = Xyes; then -- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then -- $echo "$modename: warning: library \`$lib' was moved." 1>&2 -- dir="$ladir" -- absdir="$abs_ladir" -- libdir="$abs_ladir" -- else -- dir="$libdir" -- absdir="$libdir" -- fi -- else -- dir="$ladir/$objdir" -- absdir="$abs_ladir/$objdir" -- # Remove this search path later -- notinst_path="$notinst_path $abs_ladir" -- fi # $installed = yes -- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` -+The following components of LINK-COMMAND are treated specially: - -- # This library was specified with -dlpreopen. -- if test "$pass" = dlpreopen; then -- if test -z "$libdir"; then -- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 -- exit $EXIT_FAILURE -- fi -- # Prefer using a static library (so that no silly _DYNAMIC symbols -- # are required to link). -- if test -n "$old_library"; then -- newdlprefiles="$newdlprefiles $dir/$old_library" -- # Otherwise, use the dlname, so that lt_dlopen finds it. -- elif test -n "$dlname"; then -- newdlprefiles="$newdlprefiles $dir/$dlname" -- else -- newdlprefiles="$newdlprefiles $dir/$linklib" -- fi -- fi # $pass = dlpreopen -+ -all-static do not do any dynamic linking at all -+ -avoid-version do not add a version suffix if possible -+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -+ -export-symbols SYMFILE -+ try to export only the symbols listed in SYMFILE -+ -export-symbols-regex REGEX -+ try to export only the symbols matching REGEX -+ -LLIBDIR search LIBDIR for required installed libraries -+ -lNAME OUTPUT-FILE requires the installed library libNAME -+ -module build a library that can dlopened -+ -no-fast-install disable the fast-install mode -+ -no-install link a not-installable executable -+ -no-undefined declare that a library does not refer to external symbols -+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -+ -objectlist FILE Use a list of object files found in FILE to specify objects -+ -precious-files-regex REGEX -+ don't remove output files matching REGEX -+ -release RELEASE specify package release information -+ -rpath LIBDIR the created library will eventually be installed in LIBDIR -+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -+ -shared only do dynamic linking of libtool libraries -+ -shrext SUFFIX override the standard shared library file extension -+ -static do not do any dynamic linking of uninstalled libtool libraries -+ -static-libtool-libs -+ do not do any dynamic linking of libtool libraries -+ -version-info CURRENT[:REVISION[:AGE]] -+ specify library version info [each variable defaults to 0] -+ -weak LIBNAME declare that the target provides the LIBNAME interface - -- if test -z "$libdir"; then -- # Link the convenience library -- if test "$linkmode" = lib; then -- deplibs="$dir/$old_library $deplibs" -- elif test "$linkmode,$pass" = "prog,link"; then -- compile_deplibs="$dir/$old_library $compile_deplibs" -- finalize_deplibs="$dir/$old_library $finalize_deplibs" -- else -- deplibs="$lib $deplibs" # used for prog,scan pass -- fi -- continue -- fi -+All other options (arguments beginning with \`-') are ignored. - -+Every other argument is treated as a filename. Files ending in \`.la' are -+treated as uninstalled libtool libraries, other files are standard or library -+object files. - -- if test "$linkmode" = prog && test "$pass" != link; then -- newlib_search_path="$newlib_search_path $ladir" -- deplibs="$lib $deplibs" -+If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -+only library objects (\`.lo' files) may be specified, and \`-rpath' is -+required, except when creating a convenience library. - -- linkalldeplibs=no -- if test "$link_all_deplibs" != no || test -z "$library_names" || -- test "$build_libtool_libs" = no; then -- linkalldeplibs=yes -- fi -+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -+using \`ar' and \`ranlib', or on Windows using \`lib'. - -- tmp_libs= -- for deplib in $dependency_libs; do -- case $deplib in -- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test -- esac -- # Need to link against all dependency_libs? -- if test "$linkalldeplibs" = yes; then -- deplibs="$deplib $deplibs" -- else -- # Need to hardcode shared library paths -- # or/and link against static libraries -- newdependency_libs="$deplib $newdependency_libs" -- fi -- if test "X$duplicate_deps" = "Xyes" ; then -- case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- fi -- tmp_libs="$tmp_libs $deplib" -- done # for deplib -- continue -- fi # $linkmode = prog... -+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -+is created, otherwise an executable program is created." -+ ;; - -- if test "$linkmode,$pass" = "prog,link"; then -- if test -n "$library_names" && -- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then -- # We need to hardcode the library path -- if test -n "$shlibpath_var"; then -- # Make sure the rpath contains only unique directories. -- case "$temp_rpath " in -- *" $dir "*) ;; -- *" $absdir "*) ;; -- *) temp_rpath="$temp_rpath $dir" ;; -- esac -- fi -+ uninstall) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -- # Hardcode the library path. -- # Skip directories that are in the system default run-time -- # search path. -- case " $sys_lib_dlsearch_path " in -- *" $absdir "*) ;; -- *) -- case "$compile_rpath " in -- *" $absdir "*) ;; -- *) compile_rpath="$compile_rpath $absdir" -- esac -- ;; -- esac -- case " $sys_lib_dlsearch_path " in -- *" $libdir "*) ;; -- *) -- case "$finalize_rpath " in -- *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" -- esac -- ;; -- esac -- fi # $linkmode,$pass = prog,link... -+Remove libraries from an installation directory. - -- if test "$alldeplibs" = yes && -- { test "$deplibs_check_method" = pass_all || -- { test "$build_libtool_libs" = yes && -- test -n "$library_names"; }; }; then -- # We only need to search for static libraries -- continue -- fi -- fi -+RM is the name of the program to use to delete files associated with each FILE -+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -+to RM. - -- link_static=no # Whether the deplib will be linked statically -- if test -n "$library_names" && -- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then -- if test "$installed" = no; then -- notinst_deplibs="$notinst_deplibs $lib" -- need_relink=yes -- fi -- # This is a shared library -+If FILE is a libtool library, all the files associated with it are deleted. -+Otherwise, only FILE itself is deleted using RM." -+ ;; - -- # Warn about portability, can't link against -module's on -- # some systems (darwin) -- if test "$shouldnotlink" = yes && test "$pass" = link ; then -- $echo -- if test "$linkmode" = prog; then -- $echo "*** Warning: Linking the executable $output against the loadable module" -- else -- $echo "*** Warning: Linking the shared library $output against the loadable module" -- fi -- $echo "*** $linklib is not portable!" -- fi -- if test "$linkmode" = lib && -- test "$hardcode_into_libs" = yes; then -- # Hardcode the library path. -- # Skip directories that are in the system default run-time -- # search path. -- case " $sys_lib_dlsearch_path " in -- *" $absdir "*) ;; -- *) -- case "$compile_rpath " in -- *" $absdir "*) ;; -- *) compile_rpath="$compile_rpath $absdir" -- esac -- ;; -- esac -- case " $sys_lib_dlsearch_path " in -- *" $libdir "*) ;; -- *) -- case "$finalize_rpath " in -- *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" -- esac -- ;; -- esac -- fi -+ *) -+ func_fatal_help "invalid operation mode \`$mode'" -+ ;; -+ esac - -- if test -n "$old_archive_from_expsyms_cmds"; then -- # figure out the soname -- set dummy $library_names -- realname="$2" -- shift; shift -- libname=`eval \\$echo \"$libname_spec\"` -- # use dlname if we got it. it's perfectly good, no? -- if test -n "$dlname"; then -- soname="$dlname" -- elif test -n "$soname_spec"; then -- # bleh windows -- case $host in -- *cygwin* | mingw*) -- major=`expr $current - $age` -- versuffix="-$major" -- ;; -- esac -- eval soname=\"$soname_spec\" -- else -- soname="$realname" -- fi -+ $ECHO -+ $ECHO "Try \`$progname --help' for more information about other modes." - -- # Make a new name for the extract_expsyms_cmds to use -- soroot="$soname" -- soname=`$echo $soroot | ${SED} -e 's/^.*\///'` -- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" -+ exit $? -+} - -- # If the library has no export list, then create one now -- if test -f "$output_objdir/$soname-def"; then : -- else -- $show "extracting exported symbol list from \`$soname'" -- save_ifs="$IFS"; IFS='~' -- cmds=$extract_expsyms_cmds -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- fi -+ # Now that we've collected a possible --mode arg, show help if necessary -+ $opt_help && func_mode_help - -- # Create $newlib -- if test -f "$output_objdir/$newlib"; then :; else -- $show "generating import library for \`$soname'" -- save_ifs="$IFS"; IFS='~' -- cmds=$old_archive_from_expsyms_cmds -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- fi -- # make sure the library variables are pointing to the new library -- dir=$output_objdir -- linklib=$newlib -- fi # test -n "$old_archive_from_expsyms_cmds" - -- if test "$linkmode" = prog || test "$mode" != relink; then -- add_shlibpath= -- add_dir= -- add= -- lib_linked=yes -- case $hardcode_action in -- immediate | unsupported) -- if test "$hardcode_direct" = no; then -- add="$dir/$linklib" -- case $host in -- *-*-sco3.2v5* ) add_dir="-L$dir" ;; -- *-*-darwin* ) -- # if the lib is a module then we can not link against -- # it, someone is ignoring the new warnings I added -- if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then -- $echo "** Warning, lib $linklib is a module, not a shared library" -- if test -z "$old_library" ; then -- $echo -- $echo "** And there doesn't seem to be a static archive available" -- $echo "** The link will probably fail, sorry" -- else -- add="$dir/$old_library" -- fi -- fi -- esac -- elif test "$hardcode_minus_L" = no; then -- case $host in -- *-*-sunos*) add_shlibpath="$dir" ;; -- esac -- add_dir="-L$dir" -- add="-l$name" -- elif test "$hardcode_shlibpath_var" = no; then -- add_shlibpath="$dir" -- add="-l$name" -- else -- lib_linked=no -- fi -- ;; -- relink) -- if test "$hardcode_direct" = yes; then -- add="$dir/$linklib" -- elif test "$hardcode_minus_L" = yes; then -- add_dir="-L$dir" -- # Try looking first in the location we're being installed to. -- if test -n "$inst_prefix_dir"; then -- case "$libdir" in -- [\\/]*) -- add_dir="$add_dir -L$inst_prefix_dir$libdir" -- ;; -- esac -- fi -- add="-l$name" -- elif test "$hardcode_shlibpath_var" = yes; then -- add_shlibpath="$dir" -- add="-l$name" -- else -- lib_linked=no -- fi -- ;; -- *) lib_linked=no ;; -- esac -+# func_mode_execute arg... -+func_mode_execute () -+{ -+ $opt_debug -+ # The first argument is the command name. -+ cmd="$nonopt" -+ test -z "$cmd" && \ -+ func_fatal_help "you must specify a COMMAND" - -- if test "$lib_linked" != yes; then -- $echo "$modename: configuration error: unsupported hardcode properties" -- exit $EXIT_FAILURE -- fi -+ # Handle -dlopen flags immediately. -+ for file in $execute_dlfiles; do -+ test -f "$file" \ -+ || func_fatal_help "\`$file' is not a file" - -- if test -n "$add_shlibpath"; then -- case :$compile_shlibpath: in -- *":$add_shlibpath:"*) ;; -- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; -- esac -- fi -- if test "$linkmode" = prog; then -- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" -- test -n "$add" && compile_deplibs="$add $compile_deplibs" -- else -- test -n "$add_dir" && deplibs="$add_dir $deplibs" -- test -n "$add" && deplibs="$add $deplibs" -- if test "$hardcode_direct" != yes && \ -- test "$hardcode_minus_L" != yes && \ -- test "$hardcode_shlibpath_var" = yes; then -- case :$finalize_shlibpath: in -- *":$libdir:"*) ;; -- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -- esac -- fi -- fi -- fi -+ dir= -+ case $file in -+ *.la) -+ # Check to see that this really is a libtool archive. -+ func_lalib_unsafe_p "$file" \ -+ || func_fatal_help "\`$lib' is not a valid libtool archive" - -- if test "$linkmode" = prog || test "$mode" = relink; then -- add_shlibpath= -- add_dir= -- add= -- # Finalize command for both is simple: just hardcode it. -- if test "$hardcode_direct" = yes; then -- add="$libdir/$linklib" -- elif test "$hardcode_minus_L" = yes; then -- add_dir="-L$libdir" -- add="-l$name" -- elif test "$hardcode_shlibpath_var" = yes; then -- case :$finalize_shlibpath: in -- *":$libdir:"*) ;; -- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -- esac -- add="-l$name" -- elif test "$hardcode_automatic" = yes; then -- if test -n "$inst_prefix_dir" && -- test -f "$inst_prefix_dir$libdir/$linklib" ; then -- add="$inst_prefix_dir$libdir/$linklib" -- else -- add="$libdir/$linklib" -- fi -- else -- # We cannot seem to hardcode it, guess we'll fake it. -- add_dir="-L$libdir" -- # Try looking first in the location we're being installed to. -- if test -n "$inst_prefix_dir"; then -- case "$libdir" in -- [\\/]*) -- add_dir="$add_dir -L$inst_prefix_dir$libdir" -- ;; -- esac -- fi -- add="-l$name" -- fi -+ # Read the libtool library. -+ dlname= -+ library_names= -+ func_source "$file" - -- if test "$linkmode" = prog; then -- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" -- test -n "$add" && finalize_deplibs="$add $finalize_deplibs" -- else -- test -n "$add_dir" && deplibs="$add_dir $deplibs" -- test -n "$add" && deplibs="$add $deplibs" -- fi -- fi -- elif test "$linkmode" = prog; then -- # Here we assume that one of hardcode_direct or hardcode_minus_L -- # is not unsupported. This is valid on all known static and -- # shared platforms. -- if test "$hardcode_direct" != unsupported; then -- test -n "$old_library" && linklib="$old_library" -- compile_deplibs="$dir/$linklib $compile_deplibs" -- finalize_deplibs="$dir/$linklib $finalize_deplibs" -- else -- compile_deplibs="-l$name -L$dir $compile_deplibs" -- finalize_deplibs="-l$name -L$dir $finalize_deplibs" -- fi -- elif test "$build_libtool_libs" = yes; then -- # Not a shared library -- if test "$deplibs_check_method" != pass_all; then -- # We're trying link a shared library against a static one -- # but the system doesn't support it. -+ # Skip this library if it cannot be dlopened. -+ if test -z "$dlname"; then -+ # Warn if it was a shared library. -+ test -n "$library_names" && \ -+ func_warning "\`$file' was not linked with \`-export-dynamic'" -+ continue -+ fi - -- # Just print a warning and add the library to dependency_libs so -- # that the program can be linked against the static library. -- $echo -- $echo "*** Warning: This system can not link to static lib archive $lib." -- $echo "*** I have the capability to make that library automatically link in when" -- $echo "*** you link to this library. But I can only do this if you have a" -- $echo "*** shared version of the library, which you do not appear to have." -- if test "$module" = yes; then -- $echo "*** But as you try to build a module library, libtool will still create " -- $echo "*** a static module, that should work as long as the dlopening application" -- $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." -- if test -z "$global_symbol_pipe"; then -- $echo -- $echo "*** However, this would only work if libtool was able to extract symbol" -- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" -- $echo "*** not find such a program. So, this module is probably useless." -- $echo "*** \`nm' from GNU binutils and a full rebuild may help." -- fi -- if test "$build_old_libs" = no; then -- build_libtool_libs=module -- build_old_libs=yes -- else -- build_libtool_libs=no -- fi -- fi -- else -- convenience="$convenience $dir/$old_library" -- old_convenience="$old_convenience $dir/$old_library" -- deplibs="$dir/$old_library $deplibs" -- link_static=yes -- fi -- fi # link shared/static library? -+ func_dirname "$file" "" "." -+ dir="$func_dirname_result" - -- if test "$linkmode" = lib; then -- if test -n "$dependency_libs" && -- { test "$hardcode_into_libs" != yes || -- test "$build_old_libs" = yes || -- test "$link_static" = yes; }; then -- # Extract -R from dependency_libs -- temp_deplibs= -- for libdir in $dependency_libs; do -- case $libdir in -- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` -- case " $xrpath " in -- *" $temp_xrpath "*) ;; -- *) xrpath="$xrpath $temp_xrpath";; -- esac;; -- *) temp_deplibs="$temp_deplibs $libdir";; -- esac -- done -- dependency_libs="$temp_deplibs" -+ if test -f "$dir/$objdir/$dlname"; then -+ dir="$dir/$objdir" -+ else -+ if test ! -f "$dir/$dlname"; then -+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" - fi -+ fi -+ ;; - -- newlib_search_path="$newlib_search_path $absdir" -- # Link against this library -- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" -- # ... and its dependency_libs -- tmp_libs= -- for deplib in $dependency_libs; do -- newdependency_libs="$deplib $newdependency_libs" -- if test "X$duplicate_deps" = "Xyes" ; then -- case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- fi -- tmp_libs="$tmp_libs $deplib" -- done -+ *.lo) -+ # Just add the directory containing the .lo file. -+ func_dirname "$file" "" "." -+ dir="$func_dirname_result" -+ ;; - -- if test "$link_all_deplibs" != no; then -- # Add the search paths of all dependency libraries -- for deplib in $dependency_libs; do -- case $deplib in -- -L*) path="$deplib" ;; -- *.la) -- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` -- test "X$dir" = "X$deplib" && dir="." -- # We need an absolute path. -- case $dir in -- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; -- *) -- absdir=`cd "$dir" && pwd` -- if test -z "$absdir"; then -- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 -- absdir="$dir" -- fi -- ;; -- esac -- if grep "^installed=no" $deplib > /dev/null; then -- path="$absdir/$objdir" -- else -- eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` -- if test -z "$libdir"; then -- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 -- exit $EXIT_FAILURE -- fi -- if test "$absdir" != "$libdir"; then -- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 -- fi -- path="$absdir" -- fi -- depdepl= -- case $host in -- *-*-darwin*) -- # we do not want to link against static libs, -- # but need to link against shared -- eval deplibrary_names=`${SED} -n -e 's/^library_names=$.*$$/\1/p' $deplib` -- if test -n "$deplibrary_names" ; then -- for tmp in $deplibrary_names ; do -- depdepl=$tmp -- done -- if test -f "$path/$depdepl" ; then -- depdepl="$path/$depdepl" -- fi -- # do not add paths which are already there -- case " $newlib_search_path " in -- *" $path "*) ;; -- *) newlib_search_path="$newlib_search_path $path";; -- esac -- fi -- path="" -- ;; -- *) -- path="-L$path" -- ;; -- esac -- ;; -- -l*) -- case $host in -- *-*-darwin*) -- # Again, we only want to link against shared libraries -- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` -- for tmp in $newlib_search_path ; do -- if test -f "$tmp/lib$tmp_libs.dylib" ; then -- eval depdepl="$tmp/lib$tmp_libs.dylib" -- break -- fi -- done -- path="" -- ;; -- *) continue ;; -- esac -- ;; -- *) continue ;; -- esac -- case " $deplibs " in -- *" $depdepl "*) ;; -- *) deplibs="$depdepl $deplibs" ;; -- esac -- case " $deplibs " in -- *" $path "*) ;; -- *) deplibs="$deplibs $path" ;; -- esac -- done -- fi # link_all_deplibs != no -- fi # linkmode = lib -- done # for deplib in $libs -- dependency_libs="$newdependency_libs" -- if test "$pass" = dlpreopen; then -- # Link the dlpreopened libraries before other libraries -- for deplib in $save_deplibs; do -- deplibs="$deplib $deplibs" -- done -- fi -- if test "$pass" != dlopen; then -- if test "$pass" != conv; then -- # Make sure lib_search_path contains only unique directories. -- lib_search_path= -- for dir in $newlib_search_path; do -- case "$lib_search_path " in -- *" $dir "*) ;; -- *) lib_search_path="$lib_search_path $dir" ;; -- esac -- done -- newlib_search_path= -- fi -- -- if test "$linkmode,$pass" != "prog,link"; then -- vars="deplibs" -- else -- vars="compile_deplibs finalize_deplibs" -- fi -- for var in $vars dependency_libs; do -- # Add libraries to $var in reverse order -- eval tmp_libs=\"\$$var\" -- new_libs= -- for deplib in $tmp_libs; do -- # FIXME: Pedantically, this is the right thing to do, so -- # that some nasty dependency loop isn't accidentally -- # broken: -- #new_libs="$deplib $new_libs" -- # Pragmatically, this seems to cause very few problems in -- # practice: -- case $deplib in -- -L*) new_libs="$deplib $new_libs" ;; -- -R*) ;; -- *) -- # And here is the reason: when a library appears more -- # than once as an explicit dependence of a library, or -- # is implicitly linked in more than once by the -- # compiler, it is considered special, and multiple -- # occurrences thereof are not removed. Compare this -- # with having the same library being listed as a -- # dependency of multiple other libraries: in this case, -- # we know (pedantically, we assume) the library does not -- # need to be listed more than once, so we keep only the -- # last copy. This is not always right, but it is rare -- # enough that we require users that really mean to play -- # such unportable linking tricks to link the library -- # using -Wl,-lname, so that libtool does not consider it -- # for duplicate removal. -- case " $specialdeplibs " in -- *" $deplib "*) new_libs="$deplib $new_libs" ;; -- *) -- case " $new_libs " in -- *" $deplib "*) ;; -- *) new_libs="$deplib $new_libs" ;; -- esac -- ;; -- esac -- ;; -- esac -- done -- tmp_libs= -- for deplib in $new_libs; do -- case $deplib in -- -L*) -- case " $tmp_libs " in -- *" $deplib "*) ;; -- *) tmp_libs="$tmp_libs $deplib" ;; -- esac -- ;; -- *) tmp_libs="$tmp_libs $deplib" ;; -- esac -- done -- eval $var=\"$tmp_libs\" -- done # for var -- fi -- # Last step: remove runtime libs from dependency_libs -- # (they stay in deplibs) -- tmp_libs= -- for i in $dependency_libs ; do -- case " $predeps $postdeps $compiler_lib_search_path " in -- *" $i "*) -- i="" -- ;; -- esac -- if test -n "$i" ; then -- tmp_libs="$tmp_libs $i" -- fi -- done -- dependency_libs=$tmp_libs -- done # for pass -- if test "$linkmode" = prog; then -- dlfiles="$newdlfiles" -- dlprefiles="$newdlprefiles" -- fi -- -- case $linkmode in -- oldlib) -- if test -n "$deplibs"; then -- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 -- fi -- -- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 -- fi -- -- if test -n "$rpath"; then -- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 -- fi -- -- if test -n "$xrpath"; then -- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 -- fi -- -- if test -n "$vinfo"; then -- $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 -- fi -+ *) -+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" -+ continue -+ ;; -+ esac - -- if test -n "$release"; then -- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 -- fi -+ # Get the absolute pathname. -+ absdir=`cd "$dir" && pwd` -+ test -n "$absdir" && dir="$absdir" - -- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then -- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 -+ # Now add the directory to shlibpath_var. -+ if eval "test -z \"\$$shlibpath_var\""; then -+ eval "$shlibpath_var=\"\$dir\"" -+ else -+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi -+ done - -- # Now set the variables for building old libraries. -- build_libtool_libs=no -- oldlibs="$output" -- objs="$objs$old_deplibs" -- ;; -+ # This variable tells wrapper scripts just to set shlibpath_var -+ # rather than running their programs. -+ libtool_execute_magic="$magic" - -- lib) -- # Make sure we only generate libraries of the form `libNAME.la'. -- case $outputname in -- lib*) -- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` -- eval shared_ext=\"$shrext_cmds\" -- eval libname=\"$libname_spec\" -- ;; -+ # Check if any of the arguments is a wrapper script. -+ args= -+ for file -+ do -+ case $file in -+ -*) ;; - *) -- if test "$module" = no; then -- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- fi -- if test "$need_lib_prefix" != no; then -- # Add the "lib" prefix for modules if required -- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` -- eval shared_ext=\"$shrext_cmds\" -- eval libname=\"$libname_spec\" -- else -- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` -+ # Do a test to see if this is really a libtool program. -+ if func_ltwrapper_script_p "$file"; then -+ func_source "$file" -+ # Transform arg to wrapped name. -+ file="$progdir/$program" -+ elif func_ltwrapper_executable_p "$file"; then -+ func_ltwrapper_scriptname "$file" -+ func_source "$func_ltwrapper_scriptname_result" -+ # Transform arg to wrapped name. -+ file="$progdir/$program" - fi - ;; - esac -+ # Quote arguments (to preserve shell metacharacters). -+ func_quote_for_eval "$file" -+ args="$args $func_quote_for_eval_result" -+ done - -- if test -n "$objs"; then -- if test "$deplibs_check_method" != pass_all; then -- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 -- exit $EXIT_FAILURE -- else -- $echo -- $echo "*** Warning: Linking the shared library $output against the non-libtool" -- $echo "*** objects $objs is not portable!" -- libobjs="$libobjs $objs" -- fi -+ if test "X$opt_dry_run" = Xfalse; then -+ if test -n "$shlibpath_var"; then -+ # Export the shlibpath_var. -+ eval "export $shlibpath_var" - fi - -- if test "$dlself" != no; then -- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 -- fi -+ # Restore saved environment variables -+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -+ do -+ eval "if test \"\${save_$lt_var+set}\" = set; then -+ $lt_var=\$save_$lt_var; export $lt_var -+ else -+ $lt_unset $lt_var -+ fi" -+ done - -- set dummy $rpath -- if test "$#" -gt 2; then -- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 -+ # Now prepare to actually exec the command. -+ exec_cmd="\$cmd$args" -+ else -+ # Display what would be done. -+ if test -n "$shlibpath_var"; then -+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" -+ $ECHO "export $shlibpath_var" - fi -- install_libdir="$2" -+ $ECHO "$cmd$args" -+ exit $EXIT_SUCCESS -+ fi -+} - -- oldlibs= -- if test -z "$rpath"; then -- if test "$build_libtool_libs" = yes; then -- # Building a libtool convenience library. -- # Some compilers have problems with a `.al' extension so -- # convenience libraries should have the same extension an -- # archive normally would. -- oldlibs="$output_objdir/$libname.$libext $oldlibs" -- build_libtool_libs=convenience -- build_old_libs=yes -- fi -+test "$mode" = execute && func_mode_execute ${1+"$@"} - -- if test -n "$vinfo"; then -- $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 -- fi - -- if test -n "$release"; then -- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 -- fi -- else -+# func_mode_finish arg... -+func_mode_finish () -+{ -+ $opt_debug -+ libdirs="$nonopt" -+ admincmds= - -- # Parse the version information argument. -- save_ifs="$IFS"; IFS=':' -- set dummy $vinfo 0 0 0 -- IFS="$save_ifs" -+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then -+ for dir -+ do -+ libdirs="$libdirs $dir" -+ done - -- if test -n "$8"; then -- $echo "$modename: too many parameters to \`-version-info'" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -+ for libdir in $libdirs; do -+ if test -n "$finish_cmds"; then -+ # Do each command in the finish commands. -+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds -+'"$cmd"'"' -+ fi -+ if test -n "$finish_eval"; then -+ # Do the single finish_eval. -+ eval cmds=\"$finish_eval\" -+ $opt_dry_run || eval "$cmds" || admincmds="$admincmds -+ $cmds" - fi -+ done -+ fi - -- # convert absolute version numbers to libtool ages -- # this retains compatibility with .la files and attempts -- # to make the code below a bit more comprehensible -+ # Exit here if they wanted silent mode. -+ $opt_silent && exit $EXIT_SUCCESS - -- case $vinfo_number in -- yes) -- number_major="$2" -- number_minor="$3" -- number_revision="$4" -- # -- # There are really only two kinds -- those that -- # use the current revision as the major version -- # and those that subtract age and use age as -- # a minor version. But, then there is irix -- # which has an extra 1 added just for fun -- # -- case $version_type in -- darwin|linux|osf|windows) -- current=`expr $number_major + $number_minor` -- age="$number_minor" -- revision="$number_revision" -- ;; -- freebsd-aout|freebsd-elf|sunos) -- current="$number_major" -- revision="$number_minor" -- age="0" -- ;; -- irix|nonstopux) -- current=`expr $number_major + $number_minor - 1` -- age="$number_minor" -- revision="$number_minor" -- ;; -- esac -- ;; -- no) -- current="$2" -- revision="$3" -- age="$4" -- ;; -- esac -- -- # Check that each of the things are valid numbers. -- case $current in -- [0-9]*) ;; -- *) -- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 -- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -+ $ECHO "X----------------------------------------------------------------------" | $Xsed -+ $ECHO "Libraries have been installed in:" -+ for libdir in $libdirs; do -+ $ECHO " $libdir" -+ done -+ $ECHO -+ $ECHO "If you ever happen to want to link against installed libraries" -+ $ECHO "in a given directory, LIBDIR, you must either use libtool, and" -+ $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" -+ $ECHO "flag during linking and do at least one of the following:" -+ if test -n "$shlibpath_var"; then -+ $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" -+ $ECHO " during execution" -+ fi -+ if test -n "$runpath_var"; then -+ $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" -+ $ECHO " during linking" -+ fi -+ if test -n "$hardcode_libdir_flag_spec"; then -+ libdir=LIBDIR -+ eval flag=\"$hardcode_libdir_flag_spec\" - -- case $revision in -- [0-9]*) ;; -- *) -- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 -- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -+ $ECHO " - use the \`$flag' linker flag" -+ fi -+ if test -n "$admincmds"; then -+ $ECHO " - have your system administrator run these commands:$admincmds" -+ fi -+ if test -f /etc/ld.so.conf; then -+ $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" -+ fi -+ $ECHO - -- case $age in -- [0-9]*) ;; -- *) -- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 -- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -+ $ECHO "See any operating system documentation about shared libraries for" -+ case $host in -+ solaris2.[6789]|solaris2.1[0-9]) -+ $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" -+ $ECHO "pages." -+ ;; -+ *) -+ $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." -+ ;; -+ esac -+ $ECHO "X----------------------------------------------------------------------" | $Xsed -+ exit $EXIT_SUCCESS -+} - -- if test "$age" -gt "$current"; then -- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 -- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -- exit $EXIT_FAILURE -- fi -+test "$mode" = finish && func_mode_finish ${1+"$@"} - -- # Calculate the version variables. -- major= -- versuffix= -- verstring= -- case $version_type in -- none) ;; - -- darwin) -- # Like Linux, but with the current version available in -- # verstring for coding it into the library header -- major=.`expr $current - $age` -- versuffix="$major.$age.$revision" -- # Darwin ld doesn't like 0 for these options... -- minor_current=`expr $current + 1` -- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" -- ;; -+# func_mode_install arg... -+func_mode_install () -+{ -+ $opt_debug -+ # There may be an optional sh(1) argument at the beginning of -+ # install_prog (especially on Windows NT). -+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || -+ # Allow the use of GNU shtool's install command. -+ $ECHO "X$nonopt" | $GREP shtool >/dev/null; then -+ # Aesthetically quote it. -+ func_quote_for_eval "$nonopt" -+ install_prog="$func_quote_for_eval_result " -+ arg=$1 -+ shift -+ else -+ install_prog= -+ arg=$nonopt -+ fi - -- freebsd-aout) -- major=".$current" -- versuffix=".$current.$revision"; -- ;; -+ # The real first argument should be the name of the installation program. -+ # Aesthetically quote it. -+ func_quote_for_eval "$arg" -+ install_prog="$install_prog$func_quote_for_eval_result" - -- freebsd-elf) -- major=".$current" -- versuffix=".$current"; -- ;; -+ # We need to accept at least all the BSD install flags. -+ dest= -+ files= -+ opts= -+ prev= -+ install_type= -+ isdir=no -+ stripme= -+ for arg -+ do -+ if test -n "$dest"; then -+ files="$files $dest" -+ dest=$arg -+ continue -+ fi - -- irix | nonstopux) -- major=`expr $current - $age + 1` -+ case $arg in -+ -d) isdir=yes ;; -+ -f) -+ case " $install_prog " in -+ *[\\\ /]cp\ *) ;; -+ *) prev=$arg ;; -+ esac -+ ;; -+ -g | -m | -o) -+ prev=$arg -+ ;; -+ -s) -+ stripme=" -s" -+ continue -+ ;; -+ -*) -+ ;; -+ *) -+ # If the previous option needed an argument, then skip it. -+ if test -n "$prev"; then -+ prev= -+ else -+ dest=$arg -+ continue -+ fi -+ ;; -+ esac - -- case $version_type in -- nonstopux) verstring_prefix=nonstopux ;; -- *) verstring_prefix=sgi ;; -- esac -- verstring="$verstring_prefix$major.$revision" -+ # Aesthetically quote the argument. -+ func_quote_for_eval "$arg" -+ install_prog="$install_prog $func_quote_for_eval_result" -+ done - -- # Add in all the interfaces that we are compatible with. -- loop=$revision -- while test "$loop" -ne 0; do -- iface=`expr $revision - $loop` -- loop=`expr $loop - 1` -- verstring="$verstring_prefix$major.$iface:$verstring" -- done -+ test -z "$install_prog" && \ -+ func_fatal_help "you must specify an install program" - -- # Before this point, $major must not contain `.'. -- major=.$major -- versuffix="$major.$revision" -- ;; -+ test -n "$prev" && \ -+ func_fatal_help "the \`$prev' option requires an argument" - -- linux) -- major=.`expr $current - $age` -- versuffix="$major.$age.$revision" -- ;; -+ if test -z "$files"; then -+ if test -z "$dest"; then -+ func_fatal_help "no file or destination specified" -+ else -+ func_fatal_help "you must specify a destination" -+ fi -+ fi - -- osf) -- major=.`expr $current - $age` -- versuffix=".$current.$age.$revision" -- verstring="$current.$age.$revision" -+ # Strip any trailing slash from the destination. -+ func_stripname '' '/' "$dest" -+ dest=$func_stripname_result - -- # Add in all the interfaces that we are compatible with. -- loop=$age -- while test "$loop" -ne 0; do -- iface=`expr $current - $loop` -- loop=`expr $loop - 1` -- verstring="$verstring:${iface}.0" -- done -+ # Check to see that the destination is a directory. -+ test -d "$dest" && isdir=yes -+ if test "$isdir" = yes; then -+ destdir="$dest" -+ destname= -+ else -+ func_dirname_and_basename "$dest" "" "." -+ destdir="$func_dirname_result" -+ destname="$func_basename_result" - -- # Make executables depend on our current version. -- verstring="$verstring:${current}.0" -+ # Not a directory, so check to see that there is only one file specified. -+ set dummy $files; shift -+ test "$#" -gt 1 && \ -+ func_fatal_help "\`$dest' is not a directory" -+ fi -+ case $destdir in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ for file in $files; do -+ case $file in -+ *.lo) ;; -+ *) -+ func_fatal_help "\`$destdir' must be an absolute directory name" - ;; -+ esac -+ done -+ ;; -+ esac - -- sunos) -- major=".$current" -- versuffix=".$current.$revision" -- ;; -+ # This variable tells wrapper scripts just to set variables rather -+ # than running their programs. -+ libtool_install_magic="$magic" - -- windows) -- # Use '-' rather than '.', since we only want one -- # extension on DOS 8.3 filesystems. -- major=`expr $current - $age` -- versuffix="-$major" -- ;; -+ staticlibs= -+ future_libdirs= -+ current_libdirs= -+ for file in $files; do - -- *) -- $echo "$modename: unknown library version type \`$version_type'" 1>&2 -- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -+ # Do each installation. -+ case $file in -+ *.$libext) -+ # Do the static libraries later. -+ staticlibs="$staticlibs $file" -+ ;; - -- # Clear the version info if we defaulted, and they specified a release. -- if test -z "$vinfo" && test -n "$release"; then -- major= -- case $version_type in -- darwin) -- # we can't check for "0.0" in archive_cmds due to quoting -- # problems, so we reset it completely -- verstring= -- ;; -- *) -- verstring="0.0" -- ;; -+ *.la) -+ # Check to see that this really is a libtool archive. -+ func_lalib_unsafe_p "$file" \ -+ || func_fatal_help "\`$file' is not a valid libtool archive" -+ -+ library_names= -+ old_library= -+ relink_command= -+ func_source "$file" -+ -+ # Add the libdir to current_libdirs if it is the destination. -+ if test "X$destdir" = "X$libdir"; then -+ case "$current_libdirs " in -+ *" $libdir "*) ;; -+ *) current_libdirs="$current_libdirs $libdir" ;; -+ esac -+ else -+ # Note the libdir as a future libdir. -+ case "$future_libdirs " in -+ *" $libdir "*) ;; -+ *) future_libdirs="$future_libdirs $libdir" ;; - esac -- if test "$need_version" = no; then -- versuffix= -- else -- versuffix=".0.0" -- fi - fi - -- # Remove version info from name if versioning should be avoided -- if test "$avoid_version" = yes && test "$need_version" = no; then -- major= -- versuffix= -- verstring="" -- fi -+ func_dirname "$file" "/" "" -+ dir="$func_dirname_result" -+ dir="$dir$objdir" - -- # Check to see if the archive will have undefined symbols. -- if test "$allow_undefined" = yes; then -- if test "$allow_undefined_flag" = unsupported; then -- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 -- build_libtool_libs=no -- build_old_libs=yes -+ if test -n "$relink_command"; then -+ # Determine the prefix the user has applied to our future dir. -+ inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` -+ -+ # Don't allow the user to place us outside of our expected -+ # location b/c this prevents finding dependent libraries that -+ # are installed to the same prefix. -+ # At present, this check doesn't affect windows .dll's that -+ # are installed into $libdir/../bin (currently, that works fine) -+ # but it's something to keep an eye on. -+ test "$inst_prefix_dir" = "$destdir" && \ -+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" -+ -+ if test -n "$inst_prefix_dir"; then -+ # Stick the inst_prefix_dir data into the link command. -+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` -+ else -+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` - fi -- else -- # Don't allow undefined symbols. -- allow_undefined_flag="$no_undefined_flag" -+ -+ func_warning "relinking \`$file'" -+ func_show_eval "$relink_command" \ -+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' - fi -- fi - -- if test "$mode" != relink; then -- # Remove our outputs, but don't remove object files since they -- # may have been created when compiling PIC objects. -- removelist= -- tempremovelist=`$echo "$output_objdir/*"` -- for p in $tempremovelist; do -- case $p in -- *.$objext) -- ;; -- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) -- if test "X$precious_files_regex" != "X"; then -- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 -- then -- continue -- fi -- fi -- removelist="$removelist $p" -- ;; -- *) ;; -+ # See the names of the shared library. -+ set dummy $library_names; shift -+ if test -n "$1"; then -+ realname="$1" -+ shift -+ -+ srcname="$realname" -+ test -n "$relink_command" && srcname="$realname"T -+ -+ # Install the shared library and build the symlinks. -+ func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ -+ 'exit $?' -+ tstripme="$stripme" -+ case $host_os in -+ cygwin* | mingw* | pw32* | cegcc*) -+ case $realname in -+ *.dll.a) -+ tstripme="" -+ ;; -+ esac -+ ;; - esac -- done -- if test -n "$removelist"; then -- $show "${rm}r $removelist" -- $run ${rm}r $removelist -+ if test -n "$tstripme" && test -n "$striplib"; then -+ func_show_eval "$striplib $destdir/$realname" 'exit $?' -+ fi -+ -+ if test "$#" -gt 0; then -+ # Delete the old symlinks, and create new ones. -+ # Try `ln -sf' first, because the `ln' binary might depend on -+ # the symlink we replace! Solaris /bin/ln does not understand -f, -+ # so we also need to try rm && ln -s. -+ for linkname -+ do -+ test "$linkname" != "$realname" \ -+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" -+ done -+ fi -+ -+ # Do each command in the postinstall commands. -+ lib="$destdir/$realname" -+ func_execute_cmds "$postinstall_cmds" 'exit $?' - fi -- fi - -- # Now set the variables for building old libraries. -- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then -- oldlibs="$oldlibs $output_objdir/$libname.$libext" -+ # Install the pseudo-library for information purposes. -+ func_basename "$file" -+ name="$func_basename_result" -+ instname="$dir/$name"i -+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' - -- # Transform .lo files to .o files. -- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` -- fi -+ # Maybe install the static library, too. -+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" -+ ;; - -- # Eliminate all temporary directories. -- for path in $notinst_path; do -- lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` -- deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` -- dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` -- done -+ *.lo) -+ # Install (i.e. copy) a libtool object. - -- if test -n "$xrpath"; then -- # If the user specified any rpath flags, then add them. -- temp_xrpath= -- for libdir in $xrpath; do -- temp_xrpath="$temp_xrpath -R$libdir" -- case "$finalize_rpath " in -- *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" ;; -- esac -- done -- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then -- dependency_libs="$temp_xrpath $dependency_libs" -+ # Figure out destination file name, if it wasn't already specified. -+ if test -n "$destname"; then -+ destfile="$destdir/$destname" -+ else -+ func_basename "$file" -+ destfile="$func_basename_result" -+ destfile="$destdir/$destfile" - fi -- fi - -- # Make sure dlfiles contains only unique files that won't be dlpreopened -- old_dlfiles="$dlfiles" -- dlfiles= -- for lib in $old_dlfiles; do -- case " $dlprefiles $dlfiles " in -- *" $lib "*) ;; -- *) dlfiles="$dlfiles $lib" ;; -+ # Deduce the name of the destination old-style object file. -+ case $destfile in -+ *.lo) -+ func_lo2o "$destfile" -+ staticdest=$func_lo2o_result -+ ;; -+ *.$objext) -+ staticdest="$destfile" -+ destfile= -+ ;; -+ *) -+ func_fatal_help "cannot copy a libtool object to \`$destfile'" -+ ;; - esac -- done - -- # Make sure dlprefiles contains only unique files -- old_dlprefiles="$dlprefiles" -- dlprefiles= -- for lib in $old_dlprefiles; do -- case "$dlprefiles " in -- *" $lib "*) ;; -- *) dlprefiles="$dlprefiles $lib" ;; -- esac -- done -+ # Install the libtool object if requested. -+ test -n "$destfile" && \ -+ func_show_eval "$install_prog $file $destfile" 'exit $?' - -- if test "$build_libtool_libs" = yes; then -- if test -n "$rpath"; then -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) -- # these systems don't actually have a c library (as such)! -- ;; -- *-*-rhapsody* | *-*-darwin1.[012]) -- # Rhapsody C library is in the System framework -- deplibs="$deplibs -framework System" -+ # Install the old object if enabled. -+ if test "$build_old_libs" = yes; then -+ # Deduce the name of the old-style object file. -+ func_lo2o "$file" -+ staticobj=$func_lo2o_result -+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' -+ fi -+ exit $EXIT_SUCCESS -+ ;; -+ -+ *) -+ # Figure out destination file name, if it wasn't already specified. -+ if test -n "$destname"; then -+ destfile="$destdir/$destname" -+ else -+ func_basename "$file" -+ destfile="$func_basename_result" -+ destfile="$destdir/$destfile" -+ fi -+ -+ # If the file is missing, and there is a .exe on the end, strip it -+ # because it is most likely a libtool script we actually want to -+ # install -+ stripped_ext="" -+ case $file in -+ *.exe) -+ if test ! -f "$file"; then -+ func_stripname '' '.exe' "$file" -+ file=$func_stripname_result -+ stripped_ext=".exe" -+ fi - ;; -- *-*-netbsd*) -- # Don't link with libc until the a.out ld.so is fixed. -+ esac -+ -+ # Do a test to see if this is really a libtool program. -+ case $host in -+ *cygwin* | *mingw*) -+ if func_ltwrapper_executable_p "$file"; then -+ func_ltwrapper_scriptname "$file" -+ wrapper=$func_ltwrapper_scriptname_result -+ else -+ func_stripname '' '.exe' "$file" -+ wrapper=$func_stripname_result -+ fi - ;; -- *-*-openbsd* | *-*-freebsd*) -- # Do not include libc due to us having libc/libc_r. -- test "X$arg" = "X-lc" && continue -+ *) -+ wrapper=$file - ;; -- *) -- # Add libc to deplibs on all other systems if necessary. -- if test "$build_libtool_need_lc" = "yes"; then -- deplibs="$deplibs -lc" -+ esac -+ if func_ltwrapper_script_p "$wrapper"; then -+ notinst_deplibs= -+ relink_command= -+ -+ func_source "$wrapper" -+ -+ # Check the variables that should have been set. -+ test -z "$generated_by_libtool_version" && \ -+ func_fatal_error "invalid libtool wrapper script \`$wrapper'" -+ -+ finalize=yes -+ for lib in $notinst_deplibs; do -+ # Check to see that each library is installed. -+ libdir= -+ if test -f "$lib"; then -+ func_source "$lib" - fi -- ;; -- esac -- fi -+ libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test -+ if test -n "$libdir" && test ! -f "$libfile"; then -+ func_warning "\`$lib' has not been installed in \`$libdir'" -+ finalize=no -+ fi -+ done - -- # Transform deplibs into only deplibs that can be linked in shared. -- name_save=$name -- libname_save=$libname -- release_save=$release -- versuffix_save=$versuffix -- major_save=$major -- # I'm not sure if I'm treating the release correctly. I think -- # release should show up in the -l (ie -lgmp5) so we don't want to -- # add it in twice. Is that correct? -- release="" -- versuffix="" -- major="" -- newdeplibs= -- droppeddeps=no -- case $deplibs_check_method in -- pass_all) -- # Don't check for shared/static. Everything works. -- # This might be a little naive. We might want to check -- # whether the library exists or not. But this is on -- # osf3 & osf4 and I'm not really sure... Just -- # implementing what was already the behavior. -- newdeplibs=$deplibs -- ;; -- test_compile) -- # This code stresses the "libraries are programs" paradigm to its -- # limits. Maybe even breaks it. We compile a program, linking it -- # against the deplibs as a proxy for the library. Then we can check -- # whether they linked in statically or dynamically with ldd. -- $rm conftest.c -- cat > conftest.c </dev/null` -- for potent_lib in $potential_libs; do -- # Follow soft links. -- if ls -lLd "$potent_lib" 2>/dev/null \ -- | grep " -> " >/dev/null; then -- continue -- fi -- # The statement above tries to avoid entering an -- # endless loop below, in case of cyclic links. -- # We might still enter an endless loop, since a link -- # loop can be closed while we follow links, -- # but so what? -- potlib="$potent_lib" -- while test -h "$potlib" 2>/dev/null; do -- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` -- case $potliblink in -- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; -- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; -- esac -- done -- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ -- | ${SED} 10q \ -- | $EGREP "$file_magic_regex" > /dev/null; then -- newdeplibs="$newdeplibs $a_deplib" -- a_deplib="" -- break 2 -- fi -- done -- done -- fi -- if test -n "$a_deplib" ; then -- droppeddeps=yes -- $echo -- $echo "*** Warning: linker path does not have real file for library $a_deplib." -- $echo "*** I have the capability to make that library automatically link in when" -- $echo "*** you link to this library. But I can only do this if you have a" -- $echo "*** shared version of the library, which you do not appear to have" -- $echo "*** because I did check the linker path looking for a file starting" -- if test -z "$potlib" ; then -- $echo "*** with $libname but no candidates were found. (...for file magic test)" -- else -- $echo "*** with $libname and none of the candidates passed a file format test" -- $echo "*** using a file magic. Last file checked: $potlib" -- fi -- fi -- else -- # Add a -L argument. -- newdeplibs="$newdeplibs $a_deplib" -- fi -- done # Gone through all deplibs. -- ;; -- match_pattern*) -- set dummy $deplibs_check_method -- match_pattern_regex=`expr "$deplibs_check_method" : "$2 $.*$"` -- for a_deplib in $deplibs; do -- name="`expr $a_deplib : '-l$.*$'`" -- # If $name is empty we are operating on a -L argument. -- if test -n "$name" && test "$name" != "0"; then -- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -- case " $predeps $postdeps " in -- *" $a_deplib "*) -- newdeplibs="$newdeplibs $a_deplib" -- a_deplib="" -- ;; -- esac -- fi -- if test -n "$a_deplib" ; then -- libname=`eval \\$echo \"$libname_spec\"` -- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` -- for potent_lib in $potential_libs; do -- potlib="$potent_lib" # see symlink-check above in file_magic test -- if eval $echo \"$potent_lib\" 2>/dev/null \ -- | ${SED} 10q \ -- | $EGREP "$match_pattern_regex" > /dev/null; then -- newdeplibs="$newdeplibs $a_deplib" -- a_deplib="" -- break 2 -- fi -- done -- done -- fi -- if test -n "$a_deplib" ; then -- droppeddeps=yes -- $echo -- $echo "*** Warning: linker path does not have real file for library $a_deplib." -- $echo "*** I have the capability to make that library automatically link in when" -- $echo "*** you link to this library. But I can only do this if you have a" -- $echo "*** shared version of the library, which you do not appear to have" -- $echo "*** because I did check the linker path looking for a file starting" -- if test -z "$potlib" ; then -- $echo "*** with $libname but no candidates were found. (...for regex pattern test)" -- else -- $echo "*** with $libname and none of the candidates passed a file format test" -- $echo "*** using a regex pattern. Last file checked: $potlib" -- fi -- fi -- else -- # Add a -L argument. -- newdeplibs="$newdeplibs $a_deplib" -- fi -- done # Gone through all deplibs. -- ;; -- none | unknown | *) -- newdeplibs="" -- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ -- -e 's/ -[LR][^ ]*//g'` -- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -- for i in $predeps $postdeps ; do -- # can't use Xsed below, because $i might contain '/' -- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` -- done -- fi -- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ -- | grep . >/dev/null; then -- $echo -- if test "X$deplibs_check_method" = "Xnone"; then -- $echo "*** Warning: inter-library dependencies are not supported in this platform." -- else -- $echo "*** Warning: inter-library dependencies are not known to be supported." -- fi -- $echo "*** All declared inter-library dependencies are being dropped." -- droppeddeps=yes -+ # Install the binary that we compiled earlier. -+ file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%$[^/]*$$%$objdir/\1%"` - fi -+ fi -+ -+ # remove .exe since cygwin /usr/bin/install will append another -+ # one anyway -+ case $install_prog,$host in -+ */usr/bin/install*,*cygwin*) -+ case $file:$destfile in -+ *.exe:*.exe) -+ # this is ok -+ ;; -+ *.exe:*) -+ destfile=$destfile.exe -+ ;; -+ *:*.exe) -+ func_stripname '' '.exe' "$destfile" -+ destfile=$func_stripname_result -+ ;; -+ esac - ;; - esac -- versuffix=$versuffix_save -- major=$major_save -- release=$release_save -- libname=$libname_save -- name=$name_save -+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' -+ $opt_dry_run || if test -n "$outputname"; then -+ ${RM}r "$tmpdir" -+ fi -+ ;; -+ esac -+ done - -- case $host in -- *-*-rhapsody* | *-*-darwin1.[012]) -- # On Rhapsody replace the C library is the System framework -- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` -- ;; -- esac -+ for file in $staticlibs; do -+ func_basename "$file" -+ name="$func_basename_result" - -- if test "$droppeddeps" = yes; then -- if test "$module" = yes; then -- $echo -- $echo "*** Warning: libtool could not satisfy all declared inter-library" -- $echo "*** dependencies of module $libname. Therefore, libtool will create" -- $echo "*** a static module, that should work as long as the dlopening" -- $echo "*** application is linked with the -dlopen flag." -- if test -z "$global_symbol_pipe"; then -- $echo -- $echo "*** However, this would only work if libtool was able to extract symbol" -- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" -- $echo "*** not find such a program. So, this module is probably useless." -- $echo "*** \`nm' from GNU binutils and a full rebuild may help." -- fi -- if test "$build_old_libs" = no; then -- oldlibs="$output_objdir/$libname.$libext" -- build_libtool_libs=module -- build_old_libs=yes -- else -- build_libtool_libs=no -- fi -- else -- $echo "*** The inter-library dependencies that have been dropped here will be" -- $echo "*** automatically added whenever a program is linked with this library" -- $echo "*** or is declared to -dlopen it." -+ # Set up the ranlib parameters. -+ oldlib="$destdir/$name" - -- if test "$allow_undefined" = no; then -- $echo -- $echo "*** Since this library must not contain undefined symbols," -- $echo "*** because either the platform does not support them or" -- $echo "*** it was explicitly requested with -no-undefined," -- $echo "*** libtool will only create a static version of it." -- if test "$build_old_libs" = no; then -- oldlibs="$output_objdir/$libname.$libext" -- build_libtool_libs=module -- build_old_libs=yes -- else -- build_libtool_libs=no -- fi -- fi -- fi -- fi -- # Done checking deplibs! -- deplibs=$newdeplibs -+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?' -+ -+ if test -n "$stripme" && test -n "$old_striplib"; then -+ func_show_eval "$old_striplib $oldlib" 'exit $?' - fi - -- # All the library-specific variables (install_libdir is set above). -- library_names= -- old_library= -- dlname= -+ # Do each command in the postinstall commands. -+ func_execute_cmds "$old_postinstall_cmds" 'exit $?' -+ done - -- # Test again, we may have decided not to build it any more -- if test "$build_libtool_libs" = yes; then -- if test "$hardcode_into_libs" = yes; then -- # Hardcode the library paths -- hardcode_libdirs= -- dep_rpath= -- rpath="$finalize_rpath" -- test "$mode" != relink && rpath="$compile_rpath$rpath" -- for libdir in $rpath; do -- if test -n "$hardcode_libdir_flag_spec"; then -- if test -n "$hardcode_libdir_separator"; then -- if test -z "$hardcode_libdirs"; then -- hardcode_libdirs="$libdir" -- else -- # Just accumulate the unique libdirs. -- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -- ;; -- *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -- ;; -- esac -- fi -- else -- eval flag=\"$hardcode_libdir_flag_spec\" -- dep_rpath="$dep_rpath $flag" -- fi -- elif test -n "$runpath_var"; then -- case "$perm_rpath " in -- *" $libdir "*) ;; -- *) perm_rpath="$perm_rpath $libdir" ;; -- esac -- fi -- done -- # Substitute the hardcoded libdirs into the rpath. -- if test -n "$hardcode_libdir_separator" && -- test -n "$hardcode_libdirs"; then -- libdir="$hardcode_libdirs" -- if test -n "$hardcode_libdir_flag_spec_ld"; then -- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" -- else -- eval dep_rpath=\"$hardcode_libdir_flag_spec\" -- fi -- fi -- if test -n "$runpath_var" && test -n "$perm_rpath"; then -- # We should set the runpath_var. -- rpath= -- for dir in $perm_rpath; do -- rpath="$rpath$dir:" -- done -- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" -- fi -- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" -- fi -+ test -n "$future_libdirs" && \ -+ func_warning "remember to run \`$progname --finish$future_libdirs'" - -- shlibpath="$finalize_shlibpath" -- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" -- if test -n "$shlibpath"; then -- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" -- fi -+ if test -n "$current_libdirs"; then -+ # Maybe just do a dry run. -+ $opt_dry_run && current_libdirs=" -n$current_libdirs" -+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' -+ else -+ exit $EXIT_SUCCESS -+ fi -+} - -- # Get the real and link names of the library. -- eval shared_ext=\"$shrext_cmds\" -- eval library_names=\"$library_names_spec\" -- set dummy $library_names -- realname="$2" -- shift; shift -+test "$mode" = install && func_mode_install ${1+"$@"} - -- if test -n "$soname_spec"; then -- eval soname=\"$soname_spec\" -- else -- soname="$realname" -- fi -- if test -z "$dlname"; then -- dlname=$soname -- fi - -- lib="$output_objdir/$realname" -- for link -- do -- linknames="$linknames $link" -- done -+# func_generate_dlsyms outputname originator pic_p -+# Extract symbols from dlprefiles and create ${outputname}S.o with -+# a dlpreopen symbol table. -+func_generate_dlsyms () -+{ -+ $opt_debug -+ my_outputname="$1" -+ my_originator="$2" -+ my_pic_p="${3-no}" -+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` -+ my_dlsyms= -+ -+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -+ if test -n "$NM" && test -n "$global_symbol_pipe"; then -+ my_dlsyms="${my_outputname}S.c" -+ else -+ func_error "not configured to extract global symbols from dlpreopened files" -+ fi -+ fi - -- # Use standard objects if they are pic -- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ if test -n "$my_dlsyms"; then -+ case $my_dlsyms in -+ "") ;; -+ *.c) -+ # Discover the nlist of each of the dlfiles. -+ nlist="$output_objdir/${my_outputname}.nm" - -- # Prepare the list of exported symbols -- if test -z "$export_symbols"; then -- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then -- $show "generating symbol list for \`$libname.la'" -- export_symbols="$output_objdir/$libname.exp" -- $run $rm $export_symbols -- cmds=$export_symbols_cmds -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- if len=`expr "X$cmd" : ".*"` && -- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then -- $show "$cmd" -- $run eval "$cmd" || exit $? -- skipped_export=false -- else -- # The command line is too long to execute in one step. -- $show "using reloadable object file for export list..." -- skipped_export=: -- fi -- done -- IFS="$save_ifs" -- if test -n "$export_symbols_regex"; then -- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" -- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' -- $show "$mv \"${export_symbols}T\" \"$export_symbols\"" -- $run eval '$mv "${export_symbols}T" "$export_symbols"' -- fi -- fi -- fi -+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T" - -- if test -n "$export_symbols" && test -n "$include_expsyms"; then -- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' -- fi -+ # Parse the name list into a source file. -+ func_verbose "creating $output_objdir/$my_dlsyms" - -- tmp_deplibs= -- for test_deplib in $deplibs; do -- case " $convenience " in -- *" $test_deplib "*) ;; -- *) -- tmp_deplibs="$tmp_deplibs $test_deplib" -- ;; -- esac -- done -- deplibs="$tmp_deplibs" -+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ -+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ - -- if test -n "$convenience"; then -- if test -n "$whole_archive_flag_spec"; then -- save_libobjs=$libobjs -- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -- else -- gentop="$output_objdir/${outputname}x" -- $show "${rm}r $gentop" -- $run ${rm}r "$gentop" -- $show "$mkdir $gentop" -- $run $mkdir "$gentop" -- status=$? -- if test "$status" -ne 0 && test ! -d "$gentop"; then -- exit $status -- fi -- generated="$generated $gentop" -- -- for xlib in $convenience; do -- # Extract the objects. -- case $xlib in -- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; -- *) xabs=`pwd`"/$xlib" ;; -- esac -- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` -- xdir="$gentop/$xlib" -+#ifdef __cplusplus -+extern \"C\" { -+#endif - -- $show "${rm}r $xdir" -- $run ${rm}r "$xdir" -- $show "$mkdir $xdir" -- $run $mkdir "$xdir" -- status=$? -- if test "$status" -ne 0 && test ! -d "$xdir"; then -- exit $status -- fi -- # We will extract separately just the conflicting names and we will no -- # longer touch any unique names. It is faster to leave these extract -- # automatically by $AR in one run. -- $show "(cd $xdir && $AR x $xabs)" -- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? -- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then -- : -- else -- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 -- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 -- $AR t "$xabs" | sort | uniq -cd | while read -r count name -- do -- i=1 -- while test "$i" -le "$count" -- do -- # Put our $i before any first dot (extension) -- # Never overwrite any file -- name_to="$name" -- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" -- do -- name_to=`$echo "X$name_to" | $Xsed -e "s/$[^.]*$/\1-$i/"` -- done -- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" -- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? -- i=`expr $i + 1` -- done -- done -- fi -+/* External symbol declarations for the compiler. */\ -+" - -- libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` -- done -- fi -- fi -+ if test "$dlself" = yes; then -+ func_verbose "generating symbol list for \`$output'" - -- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then -- eval flag=\"$thread_safe_flag_spec\" -- linker_flags="$linker_flags $flag" -- fi -+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" - -- # Make a backup of the uninstalled library when relinking -- if test "$mode" = relink; then -- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? -- fi -+ # Add our own program objects to the symbol list. -+ progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ for progfile in $progfiles; do -+ func_verbose "extracting global C symbols from \`$progfile'" -+ $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" -+ done - -- # Do each of the archive commands. -- if test "$module" = yes && test -n "$module_cmds" ; then -- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then -- eval test_cmds=\"$module_expsym_cmds\" -- cmds=$module_expsym_cmds -+ if test -n "$exclude_expsyms"; then -+ $opt_dry_run || { -+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' -+ eval '$MV "$nlist"T "$nlist"' -+ } -+ fi -+ -+ if test -n "$export_symbols_regex"; then -+ $opt_dry_run || { -+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' -+ eval '$MV "$nlist"T "$nlist"' -+ } -+ fi -+ -+ # Prepare the list of exported symbols -+ if test -z "$export_symbols"; then -+ export_symbols="$output_objdir/$outputname.exp" -+ $opt_dry_run || { -+ $RM $export_symbols -+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* $.*$$/\1/p' "'< "$nlist" > "$export_symbols"' -+ case $host in -+ *cygwin* | *mingw* | *cegcc* ) -+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' -+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' -+ ;; -+ esac -+ } - else -- eval test_cmds=\"$module_cmds\" -- cmds=$module_cmds -- fi -- else -- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then -- eval test_cmds=\"$archive_expsym_cmds\" -- cmds=$archive_expsym_cmds -- else -- eval test_cmds=\"$archive_cmds\" -- cmds=$archive_cmds -+ $opt_dry_run || { -+ eval "${SED} -e 's/$[].[*^$]$/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' -+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' -+ eval '$MV "$nlist"T "$nlist"' -+ case $host in -+ *cygwin | *mingw* | *cegcc* ) -+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' -+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' -+ ;; -+ esac -+ } - fi - fi - -- if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` && -- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then -- : -- else -- # The command line is too long to link in one step, link piecewise. -- $echo "creating reloadable object files..." -+ for dlprefile in $dlprefiles; do -+ func_verbose "extracting global C symbols from \`$dlprefile'" -+ func_basename "$dlprefile" -+ name="$func_basename_result" -+ $opt_dry_run || { -+ eval '$ECHO ": $name " >> "$nlist"' -+ eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" -+ } -+ done - -- # Save the value of $output and $libobjs because we want to -- # use them later. If we have whole_archive_flag_spec, we -- # want to use save_libobjs as it was before -- # whole_archive_flag_spec was expanded, because we can't -- # assume the linker understands whole_archive_flag_spec. -- # This may have to be revisited, in case too many -- # convenience libraries get linked in and end up exceeding -- # the spec. -- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then -- save_libobjs=$libobjs -+ $opt_dry_run || { -+ # Make sure we have at least an empty file. -+ test -f "$nlist" || : > "$nlist" -+ -+ if test -n "$exclude_expsyms"; then -+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T -+ $MV "$nlist"T "$nlist" - fi -- save_output=$output - -- # Clear the reloadable object creation command queue and -- # initialize k to one. -- test_cmds= -- concat_cmds= -- objlist= -- delfiles= -- last_robj= -- k=1 -- output=$output_objdir/$save_output-${k}.$objext -- # Loop over the list of objects to be linked. -- for obj in $save_libobjs -- do -- eval test_cmds=\"$reload_cmds $objlist $last_robj\" -- if test "X$objlist" = X || -- { len=`expr "X$test_cmds" : ".*"` && -- test "$len" -le "$max_cmd_len"; }; then -- objlist="$objlist $obj" -- else -- # The command $test_cmds is almost too long, add a -- # command to the queue. -- if test "$k" -eq 1 ; then -- # The first file doesn't have a previous command to add. -- eval concat_cmds=\"$reload_cmds $objlist $last_robj\" -+ # Try sorting and uniquifying the output. -+ if $GREP -v "^: " < "$nlist" | -+ if sort -k 3 /dev/null 2>&1; then -+ sort -k 3 - else -- # All subsequent reloadable object files will link in -- # the last one created. -- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" -- fi -- last_robj=$output_objdir/$save_output-${k}.$objext -- k=`expr $k + 1` -- output=$output_objdir/$save_output-${k}.$objext -- objlist=$obj -- len=1 -- fi -- done -- # Handle the remaining objects by creating one last -- # reloadable object file. All subsequent reloadable object -- # files will link in the last one created. -- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" -+ sort +2 -+ fi | -+ uniq > "$nlist"S; then -+ : -+ else -+ $GREP -v "^: " < "$nlist" > "$nlist"S -+ fi - -- if ${skipped_export-false}; then -- $show "generating symbol list for \`$libname.la'" -- export_symbols="$output_objdir/$libname.exp" -- $run $rm $export_symbols -- libobjs=$output -- # Append the command to create the export file. -- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" -- fi -- -- # Set up a command to remove the reloadale object files -- # after they are used. -- i=0 -- while test "$i" -lt "$k" -- do -- i=`expr $i + 1` -- delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" -- done -+ if test -f "$nlist"S; then -+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' -+ else -+ $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" -+ fi - -- $echo "creating a temporary reloadable object file: $output" -+ $ECHO >> "$output_objdir/$my_dlsyms" "\ - -- # Loop through the commands generated above and execute them. -- save_ifs="$IFS"; IFS='~' -- for cmd in $concat_cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -+/* The mapping between symbol names and symbols. */ -+typedef struct { -+ const char *name; -+ void *address; -+} lt_dlsymlist; -+" -+ case $host in -+ *cygwin* | *mingw* | *cegcc* ) -+ $ECHO >> "$output_objdir/$my_dlsyms" "\ -+/* DATA imports from DLLs on WIN32 con't be const, because -+ runtime relocations are performed -- see ld's documentation -+ on pseudo-relocs. */" -+ lt_dlsym_const= ;; -+ *osf5*) -+ echo >> "$output_objdir/$my_dlsyms" "\ -+/* This system does not cope well with relocations in const data */" -+ lt_dlsym_const= ;; -+ *) -+ lt_dlsym_const=const ;; -+ esac - -- libobjs=$output -- # Restore the value of output. -- output=$save_output -+ $ECHO >> "$output_objdir/$my_dlsyms" "\ -+extern $lt_dlsym_const lt_dlsymlist -+lt_${my_prefix}_LTX_preloaded_symbols[]; -+$lt_dlsym_const lt_dlsymlist -+lt_${my_prefix}_LTX_preloaded_symbols[] = -+{\ -+ { \"$my_originator\", (void *) 0 }," - -- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then -- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -- fi -- # Expand the library linking commands again to reset the -- # value of $libobjs for piecewise linking. -+ case $need_lib_prefix in -+ no) -+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" -+ ;; -+ *) -+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" -+ ;; -+ esac -+ $ECHO >> "$output_objdir/$my_dlsyms" "\ -+ {0, (void *) 0} -+}; - -- # Do each of the archive commands. -- if test "$module" = yes && test -n "$module_cmds" ; then -- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then -- cmds=$module_expsym_cmds -- else -- cmds=$module_cmds -- fi -- else -- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then -- cmds=$archive_expsym_cmds -- else -- cmds=$archive_cmds -- fi -- fi -+/* This works around a problem in FreeBSD linker */ -+#ifdef FREEBSD_WORKAROUND -+static const void *lt_preloaded_setup() { -+ return lt_${my_prefix}_LTX_preloaded_symbols; -+} -+#endif - -- # Append the command to remove the reloadable object files -- # to the just-reset $cmds. -- eval cmds=\"\$cmds~\$rm $delfiles\" -- fi -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- $show "$cmd" -- $run eval "$cmd" || exit $? -+#ifdef __cplusplus -+} -+#endif\ -+" -+ } # !$opt_dry_run -+ -+ pic_flag_for_symtable= -+ case "$compile_command " in -+ *" -static "*) ;; -+ *) -+ case $host in -+ # compiling the symbol table file with pic_flag works around -+ # a FreeBSD bug that causes programs to crash when -lm is -+ # linked before any other PIC object. But we must not use -+ # pic_flag when linking with -static. The problem exists in -+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. -+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) -+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; -+ *-*-hpux*) -+ pic_flag_for_symtable=" $pic_flag" ;; -+ *) -+ if test "X$my_pic_p" != Xno; then -+ pic_flag_for_symtable=" $pic_flag" -+ fi -+ ;; -+ esac -+ ;; -+ esac -+ symtab_cflags= -+ for arg in $LTCFLAGS; do -+ case $arg in -+ -pie | -fpie | -fPIE) ;; -+ *) symtab_cflags="$symtab_cflags $arg" ;; -+ esac - done -- IFS="$save_ifs" - -- # Restore the uninstalled library and exit -- if test "$mode" = relink; then -- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? -- exit $EXIT_SUCCESS -- fi -+ # Now compile the dynamic symbol file. -+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' - -- # Create links to the real library. -- for linkname in $linknames; do -- if test "$realname" != "$linkname"; then -- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" -- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? -+ # Clean up the generated files. -+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' -+ -+ # Transform the symbol file into the correct name. -+ symfileobj="$output_objdir/${my_outputname}S.$objext" -+ case $host in -+ *cygwin* | *mingw* | *cegcc* ) -+ if test -f "$output_objdir/$my_outputname.def"; then -+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` -+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` -+ else -+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` -+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - fi -- done -+ ;; -+ *) -+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` -+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` -+ ;; -+ esac -+ ;; -+ *) -+ func_fatal_error "unknown suffix for \`$my_dlsyms'" -+ ;; -+ esac -+ else -+ # We keep going just in case the user didn't refer to -+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe -+ # really was required. -+ -+ # Nullify the symbol file. -+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` -+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` -+ fi -+} - -- # If -module or -export-dynamic was specified, set the dlname. -- if test "$module" = yes || test "$export_dynamic" = yes; then -- # On all known operating systems, these are identical. -- dlname="$soname" -- fi -- fi -+# func_win32_libid arg -+# return the library type of file 'arg' -+# -+# Need a lot of goo to handle *both* DLLs and import libs -+# Has to be a shell function in order to 'eat' the argument -+# that is supplied when $file_magic_command is called. -+func_win32_libid () -+{ -+ $opt_debug -+ win32_libid_type="unknown" -+ win32_fileres=`file -L $1 2>/dev/null` -+ case $win32_fileres in -+ *ar\ archive\ import\ library*) # definitely import -+ win32_libid_type="x86 archive import" -+ ;; -+ *ar\ archive*) # could be an import, or static -+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | -+ $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then -+ win32_nmres=`eval $NM -f posix -A $1 | -+ $SED -n -e ' -+ 1,100{ -+ / I /{ -+ s,.*,import, -+ p -+ q -+ } -+ }'` -+ case $win32_nmres in -+ import*) win32_libid_type="x86 archive import";; -+ *) win32_libid_type="x86 archive static";; -+ esac -+ fi -+ ;; -+ *DLL*) -+ win32_libid_type="x86 DLL" -+ ;; -+ *executable*) # but shell scripts are "executable" too... -+ case $win32_fileres in -+ *MS\ Windows\ PE\ Intel*) -+ win32_libid_type="x86 DLL" - ;; -+ esac -+ ;; -+ esac -+ $ECHO "$win32_libid_type" -+} - -- obj) -- if test -n "$deplibs"; then -- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 -- fi - -- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 -- fi - -- if test -n "$rpath"; then -- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 -- fi -+# func_extract_an_archive dir oldlib -+func_extract_an_archive () -+{ -+ $opt_debug -+ f_ex_an_ar_dir="$1"; shift -+ f_ex_an_ar_oldlib="$1" -+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' -+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then -+ : -+ else -+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" -+ fi -+} - -- if test -n "$xrpath"; then -- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 -- fi - -- if test -n "$vinfo"; then -- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 -- fi -+# func_extract_archives gentop oldlib ... -+func_extract_archives () -+{ -+ $opt_debug -+ my_gentop="$1"; shift -+ my_oldlibs=${1+"$@"} -+ my_oldobjs="" -+ my_xlib="" -+ my_xabs="" -+ my_xdir="" -+ -+ for my_xlib in $my_oldlibs; do -+ # Extract the objects. -+ case $my_xlib in -+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; -+ *) my_xabs=`pwd`"/$my_xlib" ;; -+ esac -+ func_basename "$my_xlib" -+ my_xlib="$func_basename_result" -+ my_xlib_u=$my_xlib -+ while :; do -+ case " $extracted_archives " in -+ *" $my_xlib_u "*) -+ func_arith $extracted_serial + 1 -+ extracted_serial=$func_arith_result -+ my_xlib_u=lt$extracted_serial-$my_xlib ;; -+ *) break ;; -+ esac -+ done -+ extracted_archives="$extracted_archives $my_xlib_u" -+ my_xdir="$my_gentop/$my_xlib_u" - -- if test -n "$release"; then -- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 -- fi -+ func_mkdir_p "$my_xdir" - -- case $output in -- *.lo) -- if test -n "$objs$old_deplibs"; then -- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 -- exit $EXIT_FAILURE -- fi -- libobj="$output" -- obj=`$echo "X$output" | $Xsed -e "$lo2o"` -+ case $host in -+ *-darwin*) -+ func_verbose "Extracting $my_xabs" -+ # Do not bother doing anything if just a dry run -+ $opt_dry_run || { -+ darwin_orig_dir=`pwd` -+ cd $my_xdir || exit $? -+ darwin_archive=$my_xabs -+ darwin_curdir=`pwd` -+ darwin_base_archive=`basename "$darwin_archive"` -+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` -+ if test -n "$darwin_arches"; then -+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` -+ darwin_arch= -+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" -+ for darwin_arch in $darwin_arches ; do -+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" -+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" -+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" -+ func_extract_an_archive "`pwd`" "${darwin_base_archive}" -+ cd "$darwin_curdir" -+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" -+ done # $darwin_arches -+ ## Okay now we've a bunch of thin objects, gotta fatten them up :) -+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` -+ darwin_file= -+ darwin_files= -+ for darwin_file in $darwin_filelist; do -+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` -+ $LIPO -create -output "$darwin_file" $darwin_files -+ done # $darwin_filelist -+ $RM -rf unfat-$$ -+ cd "$darwin_orig_dir" -+ else -+ cd $darwin_orig_dir -+ func_extract_an_archive "$my_xdir" "$my_xabs" -+ fi # $darwin_arches -+ } # !$opt_dry_run - ;; - *) -- libobj= -- obj="$output" -+ func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac -+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` -+ done - -- # Delete the old objects. -- $run $rm $obj $libobj -+ func_extract_archives_result="$my_oldobjs" -+} - -- # Objects from convenience libraries. This assumes -- # single-version convenience libraries. Whenever we create -- # different ones for PIC/non-PIC, this we'll have to duplicate -- # the extraction. -- reload_conv_objs= -- gentop= -- # reload_cmds runs $LD directly, so let us get rid of -- # -Wl from whole_archive_flag_spec -- wl= - -- if test -n "$convenience"; then -- if test -n "$whole_archive_flag_spec"; then -- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" -- else -- gentop="$output_objdir/${obj}x" -- $show "${rm}r $gentop" -- $run ${rm}r "$gentop" -- $show "$mkdir $gentop" -- $run $mkdir "$gentop" -- status=$? -- if test "$status" -ne 0 && test ! -d "$gentop"; then -- exit $status -- fi -- generated="$generated $gentop" - -- for xlib in $convenience; do -- # Extract the objects. -- case $xlib in -- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; -- *) xabs=`pwd`"/$xlib" ;; -- esac -- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` -- xdir="$gentop/$xlib" -+# func_emit_wrapper_part1 [arg=no] -+# -+# Emit the first part of a libtool wrapper script on stdout. -+# For more information, see the description associated with -+# func_emit_wrapper(), below. -+func_emit_wrapper_part1 () -+{ -+ func_emit_wrapper_part1_arg1=no -+ if test -n "$1" ; then -+ func_emit_wrapper_part1_arg1=$1 -+ fi - -- $show "${rm}r $xdir" -- $run ${rm}r "$xdir" -- $show "$mkdir $xdir" -- $run $mkdir "$xdir" -- status=$? -- if test "$status" -ne 0 && test ! -d "$xdir"; then -- exit $status -- fi -- # We will extract separately just the conflicting names and we will no -- # longer touch any unique names. It is faster to leave these extract -- # automatically by $AR in one run. -- $show "(cd $xdir && $AR x $xabs)" -- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? -- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then -- : -- else -- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 -- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 -- $AR t "$xabs" | sort | uniq -cd | while read -r count name -- do -- i=1 -- while test "$i" -le "$count" -- do -- # Put our $i before any first dot (extension) -- # Never overwrite any file -- name_to="$name" -- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" -- do -- name_to=`$echo "X$name_to" | $Xsed -e "s/$[^.]*$/\1-$i/"` -- done -- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" -- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? -- i=`expr $i + 1` -- done -- done -- fi -+ $ECHO "\ -+#! $SHELL - -- reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` -- done -- fi -- fi -- -- # Create the old-style object. -- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test -- -- output="$obj" -- cmds=$reload_cmds -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -+# $output - temporary wrapper script for $objdir/$outputname -+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -+# -+# The $output program cannot be directly executed until all the libtool -+# libraries that it depends on are installed. -+# -+# This wrapper script should never be moved out of the build directory. -+# If it is, it will not operate correctly. - -- # Exit if we aren't doing a library object file. -- if test -z "$libobj"; then -- if test -n "$gentop"; then -- $show "${rm}r $gentop" -- $run ${rm}r $gentop -- fi -+# Sed substitution that helps us do robust quoting. It backslashifies -+# metacharacters that are still active within double-quoted strings. -+Xsed='${SED} -e 1s/^X//' -+sed_quote_subst='$sed_quote_subst' - -- exit $EXIT_SUCCESS -- fi -+# Be Bourne compatible -+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '\${1+\"\$@\"}'='\"\$@\"' -+ setopt NO_GLOB_SUBST -+else -+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -+fi -+BIN_SH=xpg4; export BIN_SH # for Tru64 -+DUALCASE=1; export DUALCASE # for MKS sh - -- if test "$build_libtool_libs" != yes; then -- if test -n "$gentop"; then -- $show "${rm}r $gentop" -- $run ${rm}r $gentop -- fi -+# The HP-UX ksh and POSIX shell print the target directory to stdout -+# if CDPATH is set. -+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -- # Create an invalid libtool object if no PIC, so that we don't -- # accidentally link it into a program. -- # $show "echo timestamp > $libobj" -- # $run eval "echo timestamp > $libobj" || exit $? -- exit $EXIT_SUCCESS -- fi -+relink_command=\"$relink_command\" - -- if test -n "$pic_flag" || test "$pic_mode" != default; then -- # Only do commands if we really have different PIC objects. -- reload_objs="$libobjs $reload_conv_objs" -- output="$libobj" -- cmds=$reload_cmds -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- fi -+# This environment variable determines our operation mode. -+if test \"\$libtool_install_magic\" = \"$magic\"; then -+ # install mode needs the following variables: -+ generated_by_libtool_version='$macro_version' -+ notinst_deplibs='$notinst_deplibs' -+else -+ # When we are sourced in execute mode, \$file and \$ECHO are already set. -+ if test \"\$libtool_execute_magic\" != \"$magic\"; then -+ ECHO=\"$qecho\" -+ file=\"\$0\" -+ # Make sure echo works. -+ if test \"X\$1\" = X--no-reexec; then -+ # Discard the --no-reexec flag, and continue. -+ shift -+ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then -+ # Yippee, \$ECHO works! -+ : -+ else -+ # Restart under the correct shell, and then maybe \$ECHO will work. -+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} -+ fi -+ fi\ -+" -+ $ECHO "\ - -- if test -n "$gentop"; then -- $show "${rm}r $gentop" -- $run ${rm}r $gentop -- fi -+ # Find the directory that this script lives in. -+ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` -+ test \"x\$thisdir\" = \"x\$file\" && thisdir=. - -- exit $EXIT_SUCCESS -- ;; -+ # Follow symbolic links until we get to the real thisdir. -+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` -+ while test -n \"\$file\"; do -+ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - -- prog) -- case $host in -- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; -+ # If there was a directory component, then change thisdir. -+ if test \"x\$destdir\" != \"x\$file\"; then -+ case \"\$destdir\" in -+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; -+ *) thisdir=\"\$thisdir/\$destdir\" ;; - esac -- if test -n "$vinfo"; then -- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 -- fi -+ fi - -- if test -n "$release"; then -- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 -- fi -+ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` -+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` -+ done -+" -+} -+# end: func_emit_wrapper_part1 - -- if test "$preload" = yes; then -- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && -- test "$dlopen_self_static" = unknown; then -- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." -- fi -- fi -+# func_emit_wrapper_part2 [arg=no] -+# -+# Emit the second part of a libtool wrapper script on stdout. -+# For more information, see the description associated with -+# func_emit_wrapper(), below. -+func_emit_wrapper_part2 () -+{ -+ func_emit_wrapper_part2_arg1=no -+ if test -n "$1" ; then -+ func_emit_wrapper_part2_arg1=$1 -+ fi -+ -+ $ECHO "\ -+ -+ # Usually 'no', except on cygwin/mingw when embedded into -+ # the cwrapper. -+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 -+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then -+ # special case for '.' -+ if test \"\$thisdir\" = \".\"; then -+ thisdir=\`pwd\` -+ fi -+ # remove .libs from thisdir -+ case \"\$thisdir\" in -+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; -+ $objdir ) thisdir=. ;; -+ esac -+ fi - -- case $host in -- *-*-rhapsody* | *-*-darwin1.[012]) -- # On Rhapsody replace the C library is the System framework -- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` -- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` -- ;; -- esac -+ # Try to get the absolute directory name. -+ absdir=\`cd \"\$thisdir\" && pwd\` -+ test -n \"\$absdir\" && thisdir=\"\$absdir\" -+" - -- case $host in -- *darwin*) -- # Don't allow lazy linking, it breaks C++ global constructors -- if test "$tagname" = CXX ; then -- compile_command="$compile_command ${wl}-bind_at_load" -- finalize_command="$finalize_command ${wl}-bind_at_load" -- fi -- ;; -- esac -+ if test "$fast_install" = yes; then -+ $ECHO "\ -+ program=lt-'$outputname'$exeext -+ progdir=\"\$thisdir/$objdir\" - -- compile_command="$compile_command $compile_deplibs" -- finalize_command="$finalize_command $finalize_deplibs" -+ if test ! -f \"\$progdir/\$program\" || -+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ -+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then - -- if test -n "$rpath$xrpath"; then -- # If the user specified any rpath flags, then add them. -- for libdir in $rpath $xrpath; do -- # This is the magic to use -rpath. -- case "$finalize_rpath " in -- *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" ;; -- esac -- done -- fi -+ file=\"\$\$-\$program\" - -- # Now hardcode the library paths -- rpath= -- hardcode_libdirs= -- for libdir in $compile_rpath $finalize_rpath; do -- if test -n "$hardcode_libdir_flag_spec"; then -- if test -n "$hardcode_libdir_separator"; then -- if test -z "$hardcode_libdirs"; then -- hardcode_libdirs="$libdir" -- else -- # Just accumulate the unique libdirs. -- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -- ;; -- *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -- ;; -- esac -- fi -- else -- eval flag=\"$hardcode_libdir_flag_spec\" -- rpath="$rpath $flag" -- fi -- elif test -n "$runpath_var"; then -- case "$perm_rpath " in -- *" $libdir "*) ;; -- *) perm_rpath="$perm_rpath $libdir" ;; -- esac -- fi -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -- case :$dllsearchpath: in -- *":$libdir:"*) ;; -- *) dllsearchpath="$dllsearchpath:$libdir";; -- esac -- ;; -- esac -- done -- # Substitute the hardcoded libdirs into the rpath. -- if test -n "$hardcode_libdir_separator" && -- test -n "$hardcode_libdirs"; then -- libdir="$hardcode_libdirs" -- eval rpath=\" $hardcode_libdir_flag_spec\" -- fi -- compile_rpath="$rpath" -+ if test ! -d \"\$progdir\"; then -+ $MKDIR \"\$progdir\" -+ else -+ $RM \"\$progdir/\$file\" -+ fi" - -- rpath= -- hardcode_libdirs= -- for libdir in $finalize_rpath; do -- if test -n "$hardcode_libdir_flag_spec"; then -- if test -n "$hardcode_libdir_separator"; then -- if test -z "$hardcode_libdirs"; then -- hardcode_libdirs="$libdir" -- else -- # Just accumulate the unique libdirs. -- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -- ;; -- *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -- ;; -- esac -- fi -- else -- eval flag=\"$hardcode_libdir_flag_spec\" -- rpath="$rpath $flag" -- fi -- elif test -n "$runpath_var"; then -- case "$finalize_perm_rpath " in -- *" $libdir "*) ;; -- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; -- esac -- fi -- done -- # Substitute the hardcoded libdirs into the rpath. -- if test -n "$hardcode_libdir_separator" && -- test -n "$hardcode_libdirs"; then -- libdir="$hardcode_libdirs" -- eval rpath=\" $hardcode_libdir_flag_spec\" -- fi -- finalize_rpath="$rpath" -+ $ECHO "\ - -- if test -n "$libobjs" && test "$build_old_libs" = yes; then -- # Transform all the library objects into standard objects. -- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ # relink executable if necessary -+ if test -n \"\$relink_command\"; then -+ if relink_command_output=\`eval \$relink_command 2>&1\`; then : -+ else -+ $ECHO \"\$relink_command_output\" >&2 -+ $RM \"\$progdir/\$file\" -+ exit 1 - fi -+ fi - -- dlsyms= -- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -- if test -n "$NM" && test -n "$global_symbol_pipe"; then -- dlsyms="${outputname}S.c" -+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || -+ { $RM \"\$progdir/\$program\"; -+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } -+ $RM \"\$progdir/\$file\" -+ fi" - else -- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 -+ $ECHO "\ -+ program='$outputname' -+ progdir=\"\$thisdir/$objdir\" -+" - fi -- fi - -- if test -n "$dlsyms"; then -- case $dlsyms in -- "") ;; -- *.c) -- # Discover the nlist of each of the dlfiles. -- nlist="$output_objdir/${outputname}.nm" -+ $ECHO "\ - -- $show "$rm $nlist ${nlist}S ${nlist}T" -- $run $rm "$nlist" "${nlist}S" "${nlist}T" -+ if test -f \"\$progdir/\$program\"; then" - -- # Parse the name list into a source file. -- $show "creating $output_objdir/$dlsyms" -+ # Export our shlibpath_var if we have one. -+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then -+ $ECHO "\ -+ # Add our own library path to $shlibpath_var -+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - -- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ --/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ --/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ -+ # Some systems cannot cope with colon-terminated $shlibpath_var -+ # The second colon is a workaround for a bug in BeOS R4 sed -+ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - --#ifdef __cplusplus --extern \"C\" { --#endif -+ export $shlibpath_var -+" -+ fi - --/* Prevent the only kind of declaration conflicts we can make. */ --#define lt_preloaded_symbols some_other_symbol -+ # fixup the dll searchpath if we need to. -+ if test -n "$dllsearchpath"; then -+ $ECHO "\ -+ # Add the dll search path components to the executable PATH -+ PATH=$dllsearchpath:\$PATH -+" -+ fi - --/* External symbol declarations for the compiler. */\ -+ $ECHO "\ -+ if test \"\$libtool_execute_magic\" != \"$magic\"; then -+ # Run the actual program with our arguments. -+" -+ case $host in -+ # Backslashes separate directories on plain windows -+ *-*-mingw | *-*-os2* | *-cegcc*) -+ $ECHO "\ -+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} - " -+ ;; - -- if test "$dlself" = yes; then -- $show "generating symbol list for \`$output'" -+ *) -+ $ECHO "\ -+ exec \"\$progdir/\$program\" \${1+\"\$@\"} -+" -+ ;; -+ esac -+ $ECHO "\ -+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 -+ exit 1 -+ fi -+ else -+ # The program doesn't exist. -+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 -+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 -+ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 -+ exit 1 -+ fi -+fi\ -+" -+} -+# end: func_emit_wrapper_part2 - -- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - -- # Add our own program objects to the symbol list. -- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -- for arg in $progfiles; do -- $show "extracting global C symbols from \`$arg'" -- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" -- done -- -- if test -n "$exclude_expsyms"; then -- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' -- $run eval '$mv "$nlist"T "$nlist"' -- fi -- -- if test -n "$export_symbols_regex"; then -- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' -- $run eval '$mv "$nlist"T "$nlist"' -- fi -- -- # Prepare the list of exported symbols -- if test -z "$export_symbols"; then -- export_symbols="$output_objdir/$output.exp" -- $run $rm $export_symbols -- $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* $.*$$/\1/p' "'< "$nlist" > "$export_symbols"' -- else -- $run eval "${SED} -e 's/$[][.*^$]$/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' -- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' -- $run eval 'mv "$nlist"T "$nlist"' -- fi -- fi -- -- for arg in $dlprefiles; do -- $show "extracting global C symbols from \`$arg'" -- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` -- $run eval '$echo ": $name " >> "$nlist"' -- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" -- done -- -- if test -z "$run"; then -- # Make sure we have at least an empty file. -- test -f "$nlist" || : > "$nlist" -- -- if test -n "$exclude_expsyms"; then -- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T -- $mv "$nlist"T "$nlist" -- fi -- -- # Try sorting and uniquifying the output. -- if grep -v "^: " < "$nlist" | -- if sort -k 3 /dev/null 2>&1; then -- sort -k 3 -- else -- sort +2 -- fi | -- uniq > "$nlist"S; then -- : -- else -- grep -v "^: " < "$nlist" > "$nlist"S -- fi -- -- if test -f "$nlist"S; then -- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' -- else -- $echo '/* NONE */' >> "$output_objdir/$dlsyms" -- fi -- -- $echo >> "$output_objdir/$dlsyms" "\ -- --#undef lt_preloaded_symbols -- --#if defined (__STDC__) && __STDC__ --# define lt_ptr void * --#else --# define lt_ptr char * --# define const --#endif -+# func_emit_wrapper [arg=no] -+# -+# Emit a libtool wrapper script on stdout. -+# Don't directly open a file because we may want to -+# incorporate the script contents within a cygwin/mingw -+# wrapper executable. Must ONLY be called from within -+# func_mode_link because it depends on a number of variables -+# set therein. -+# -+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -+# variable will take. If 'yes', then the emitted script -+# will assume that the directory in which it is stored is -+# the $objdir directory. This is a cygwin/mingw-specific -+# behavior. -+func_emit_wrapper () -+{ -+ func_emit_wrapper_arg1=no -+ if test -n "$1" ; then -+ func_emit_wrapper_arg1=$1 -+ fi - --/* The mapping between symbol names and symbols. */ --const struct { -- const char *name; -- lt_ptr address; -+ # split this up so that func_emit_cwrapperexe_src -+ # can call each part independently. -+ func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" -+ func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" - } --lt_preloaded_symbols[] = --{\ --" -- -- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" - -- $echo >> "$output_objdir/$dlsyms" "\ -- {0, (lt_ptr) 0} --}; - --/* This works around a problem in FreeBSD linker */ --#ifdef FREEBSD_WORKAROUND --static const void *lt_preloaded_setup() { -- return lt_preloaded_symbols; -+# func_to_host_path arg -+# -+# Convert paths to host format when used with build tools. -+# Intended for use with "native" mingw (where libtool itself -+# is running under the msys shell), or in the following cross- -+# build environments: -+# $build $host -+# mingw (msys) mingw [e.g. native] -+# cygwin mingw -+# *nix + wine mingw -+# where wine is equipped with the `winepath' executable. -+# In the native mingw case, the (msys) shell automatically -+# converts paths for any non-msys applications it launches, -+# but that facility isn't available from inside the cwrapper. -+# Similar accommodations are necessary for $host mingw and -+# $build cygwin. Calling this function does no harm for other -+# $host/$build combinations not listed above. -+# -+# ARG is the path (on $build) that should be converted to -+# the proper representation for $host. The result is stored -+# in $func_to_host_path_result. -+func_to_host_path () -+{ -+ func_to_host_path_result="$1" -+ if test -n "$1" ; then -+ case $host in -+ *mingw* ) -+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' -+ case $build in -+ *mingw* ) # actually, msys -+ # awkward: cmd appends spaces to result -+ lt_sed_strip_trailing_spaces="s/[ ]*\$//" -+ func_to_host_path_tmp1=`( cmd //c echo "$1" |\ -+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` -+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ -+ $SED -e "$lt_sed_naive_backslashify"` -+ ;; -+ *cygwin* ) -+ func_to_host_path_tmp1=`cygpath -w "$1"` -+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ -+ $SED -e "$lt_sed_naive_backslashify"` -+ ;; -+ * ) -+ # Unfortunately, winepath does not exit with a non-zero -+ # error code, so we are forced to check the contents of -+ # stdout. On the other hand, if the command is not -+ # found, the shell will set an exit code of 127 and print -+ # *an error message* to stdout. So we must check for both -+ # error code of zero AND non-empty stdout, which explains -+ # the odd construction: -+ func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` -+ if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then -+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ -+ $SED -e "$lt_sed_naive_backslashify"` -+ else -+ # Allow warning below. -+ func_to_host_path_result="" -+ fi -+ ;; -+ esac -+ if test -z "$func_to_host_path_result" ; then -+ func_error "Could not determine host path corresponding to" -+ func_error " '$1'" -+ func_error "Continuing, but uninstalled executables may not work." -+ # Fallback: -+ func_to_host_path_result="$1" -+ fi -+ ;; -+ esac -+ fi - } --#endif -+# end: func_to_host_path - --#ifdef __cplusplus -+# func_to_host_pathlist arg -+# -+# Convert pathlists to host format when used with build tools. -+# See func_to_host_path(), above. This function supports the -+# following $build/$host combinations (but does no harm for -+# combinations not listed here): -+# $build $host -+# mingw (msys) mingw [e.g. native] -+# cygwin mingw -+# *nix + wine mingw -+# -+# Path separators are also converted from $build format to -+# $host format. If ARG begins or ends with a path separator -+# character, it is preserved (but converted to $host format) -+# on output. -+# -+# ARG is a pathlist (on $build) that should be converted to -+# the proper representation on $host. The result is stored -+# in $func_to_host_pathlist_result. -+func_to_host_pathlist () -+{ -+ func_to_host_pathlist_result="$1" -+ if test -n "$1" ; then -+ case $host in -+ *mingw* ) -+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' -+ # Remove leading and trailing path separator characters from -+ # ARG. msys behavior is inconsistent here, cygpath turns them -+ # into '.;' and ';.', and winepath ignores them completely. -+ func_to_host_pathlist_tmp2="$1" -+ # Once set for this call, this variable should not be -+ # reassigned. It is used in tha fallback case. -+ func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ -+ $SED -e 's|^:*||' -e 's|:*$||'` -+ case $build in -+ *mingw* ) # Actually, msys. -+ # Awkward: cmd appends spaces to result. -+ lt_sed_strip_trailing_spaces="s/[ ]*\$//" -+ func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ -+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` -+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ -+ $SED -e "$lt_sed_naive_backslashify"` -+ ;; -+ *cygwin* ) -+ func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` -+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ -+ $SED -e "$lt_sed_naive_backslashify"` -+ ;; -+ * ) -+ # unfortunately, winepath doesn't convert pathlists -+ func_to_host_pathlist_result="" -+ func_to_host_pathlist_oldIFS=$IFS -+ IFS=: -+ for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do -+ IFS=$func_to_host_pathlist_oldIFS -+ if test -n "$func_to_host_pathlist_f" ; then -+ func_to_host_path "$func_to_host_pathlist_f" -+ if test -n "$func_to_host_path_result" ; then -+ if test -z "$func_to_host_pathlist_result" ; then -+ func_to_host_pathlist_result="$func_to_host_path_result" -+ else -+ func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" -+ fi -+ fi -+ fi -+ IFS=: -+ done -+ IFS=$func_to_host_pathlist_oldIFS -+ ;; -+ esac -+ if test -z "$func_to_host_pathlist_result" ; then -+ func_error "Could not determine the host path(s) corresponding to" -+ func_error " '$1'" -+ func_error "Continuing, but uninstalled executables may not work." -+ # Fallback. This may break if $1 contains DOS-style drive -+ # specifications. The fix is not to complicate the expression -+ # below, but for the user to provide a working wine installation -+ # with winepath so that path translation in the cross-to-mingw -+ # case works properly. -+ lt_replace_pathsep_nix_to_dos="s|:|;|g" -+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ -+ $SED -e "$lt_replace_pathsep_nix_to_dos"` -+ fi -+ # Now, add the leading and trailing path separators back -+ case "$1" in -+ :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" -+ ;; -+ esac -+ case "$1" in -+ *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" -+ ;; -+ esac -+ ;; -+ esac -+ fi - } --#endif\ --" -- fi -- -- pic_flag_for_symtable= -- case $host in -- # compiling the symbol table file with pic_flag works around -- # a FreeBSD bug that causes programs to crash when -lm is -- # linked before any other PIC object. But we must not use -- # pic_flag when linking with -static. The problem exists in -- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. -- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) -- case "$compile_command " in -- *" -static "*) ;; -- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; -- esac;; -- *-*-hpux*) -- case "$compile_command " in -- *" -static "*) ;; -- *) pic_flag_for_symtable=" $pic_flag";; -- esac -- esac -- -- # Now compile the dynamic symbol file. -- $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" -- $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? -- -- # Clean up the generated files. -- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" -- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" -- -- # Transform the symbol file into the correct name. -- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` -- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` -- ;; -- *) -- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -- else -- # We keep going just in case the user didn't refer to -- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe -- # really was required. -- -- # Nullify the symbol file. -- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` -- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` -- fi -- -- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then -- # Replace the output file specification. -- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -- link_command="$compile_command$compile_rpath" -- -- # We have no uninstalled library dependencies, so finalize right now. -- $show "$link_command" -- $run eval "$link_command" -- status=$? -- -- # Delete the generated files. -- if test -n "$dlsyms"; then -- $show "$rm $output_objdir/${outputname}S.${objext}" -- $run $rm "$output_objdir/${outputname}S.${objext}" -- fi -- -- exit $status -- fi -- -- if test -n "$shlibpath_var"; then -- # We should set the shlibpath_var -- rpath= -- for dir in $temp_rpath; do -- case $dir in -- [\\/]* | [A-Za-z]:[\\/]*) -- # Absolute path. -- rpath="$rpath$dir:" -- ;; -- *) -- # Relative path: add a thisdir entry. -- rpath="$rpath\$thisdir/$dir:" -- ;; -- esac -- done -- temp_rpath="$rpath" -- fi -- -- if test -n "$compile_shlibpath$finalize_shlibpath"; then -- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" -- fi -- if test -n "$finalize_shlibpath"; then -- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" -- fi -- -- compile_var= -- finalize_var= -- if test -n "$runpath_var"; then -- if test -n "$perm_rpath"; then -- # We should set the runpath_var. -- rpath= -- for dir in $perm_rpath; do -- rpath="$rpath$dir:" -- done -- compile_var="$runpath_var=\"$rpath\$$runpath_var\" " -- fi -- if test -n "$finalize_perm_rpath"; then -- # We should set the runpath_var. -- rpath= -- for dir in $finalize_perm_rpath; do -- rpath="$rpath$dir:" -- done -- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " -- fi -- fi -- -- if test "$no_install" = yes; then -- # We don't need to create a wrapper script. -- link_command="$compile_var$compile_command$compile_rpath" -- # Replace the output file specification. -- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -- # Delete the old output file. -- $run $rm $output -- # Link the executable and exit -- $show "$link_command" -- $run eval "$link_command" || exit $? -- exit $EXIT_SUCCESS -- fi -- -- if test "$hardcode_action" = relink; then -- # Fast installation is not supported -- link_command="$compile_var$compile_command$compile_rpath" -- relink_command="$finalize_var$finalize_command$finalize_rpath" -- -- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 -- $echo "$modename: \`$output' will be relinked during installation" 1>&2 -- else -- if test "$fast_install" != no; then -- link_command="$finalize_var$compile_command$finalize_rpath" -- if test "$fast_install" = yes; then -- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` -- else -- # fast_install is set to needless -- relink_command= -- fi -- else -- link_command="$compile_var$compile_command$compile_rpath" -- relink_command="$finalize_var$finalize_command$finalize_rpath" -- fi -- fi -- -- # Replace the output file specification. -- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` -- -- # Delete the old output files. -- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname -- -- $show "$link_command" -- $run eval "$link_command" || exit $? -- -- # Now create the wrapper script. -- $show "creating $output" -- -- # Quote the relink command for shipping. -- if test -n "$relink_command"; then -- # Preserve any variables that may affect compiler behavior -- for var in $variables_saved_for_relink; do -- if eval test -z \"\${$var+set}\"; then -- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" -- elif eval var_value=\$$var; test -z "$var_value"; then -- relink_command="$var=; export $var; $relink_command" -- else -- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` -- relink_command="$var=\"$var_value\"; export $var; $relink_command" -- fi -- done -- relink_command="(cd `pwd`; $relink_command)" -- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` -- fi -- -- # Quote $echo for shipping. -- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then -- case $progpath in -- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; -- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; -- esac -- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` -- else -- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` -- fi -- -- # Only actually do things if our run command is non-null. -- if test -z "$run"; then -- # win32 will think the script is a binary if it has -- # a .exe suffix, so we strip it off here. -- case $output in -- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; -- esac -- # test for cygwin because mv fails w/o .exe extensions -- case $host in -- *cygwin*) -- exeext=.exe -- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; -- *) exeext= ;; -- esac -- case $host in -- *cygwin* | *mingw* ) -- cwrappersource=`$echo ${objdir}/lt-${output}.c` -- cwrapper=`$echo ${output}.exe` -- $rm $cwrappersource $cwrapper -- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 -+# end: func_to_host_pathlist - -- cat > $cwrappersource <> $cwrappersource<<"EOF" -+ cat <<"EOF" - #include - #include --#include -+#ifdef _MSC_VER -+# include -+# include -+# include -+# define setmode _setmode -+#else -+# include -+# include -+# ifdef __CYGWIN__ -+# include -+# define HAVE_SETENV -+# ifdef __STRICT_ANSI__ -+char *realpath (const char *, char *); -+int putenv (char *); -+int setenv (const char *, const char *, int); -+# endif -+# endif -+#endif - #include - #include - #include -+#include -+#include -+#include -+#include -+#include - - #if defined(PATH_MAX) - # define LT_PATHMAX PATH_MAX -@@ -4618,154 +3185,657 @@ EOF - # define LT_PATHMAX 1024 - #endif - -+#ifndef S_IXOTH -+# define S_IXOTH 0 -+#endif -+#ifndef S_IXGRP -+# define S_IXGRP 0 -+#endif -+ -+#ifdef _MSC_VER -+# define S_IXUSR _S_IEXEC -+# define stat _stat -+# ifndef _INTPTR_T_DEFINED -+# define intptr_t int -+# endif -+#endif -+ - #ifndef DIR_SEPARATOR --#define DIR_SEPARATOR '/' -+# define DIR_SEPARATOR '/' -+# define PATH_SEPARATOR ':' - #endif - - #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) --#define HAVE_DOS_BASED_FILE_SYSTEM --#ifndef DIR_SEPARATOR_2 --#define DIR_SEPARATOR_2 '\\' --#endif -+# define HAVE_DOS_BASED_FILE_SYSTEM -+# define FOPEN_WB "wb" -+# ifndef DIR_SEPARATOR_2 -+# define DIR_SEPARATOR_2 '\\' -+# endif -+# ifndef PATH_SEPARATOR_2 -+# define PATH_SEPARATOR_2 ';' -+# endif - #endif - - #ifndef DIR_SEPARATOR_2 - # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) - #else /* DIR_SEPARATOR_2 */ - # define IS_DIR_SEPARATOR(ch) \ -- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) - #endif /* DIR_SEPARATOR_2 */ - -+#ifndef PATH_SEPARATOR_2 -+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -+#else /* PATH_SEPARATOR_2 */ -+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -+#endif /* PATH_SEPARATOR_2 */ -+ -+#ifdef __CYGWIN__ -+# define FOPEN_WB "wb" -+#endif -+ -+#ifndef FOPEN_WB -+# define FOPEN_WB "w" -+#endif -+#ifndef _O_BINARY -+# define _O_BINARY 0 -+#endif -+ - #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) - #define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ - } while (0) - -+#undef LTWRAPPER_DEBUGPRINTF -+#if defined DEBUGWRAPPER -+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args -+static void -+ltwrapper_debugprintf (const char *fmt, ...) -+{ -+ va_list args; -+ va_start (args, fmt); -+ (void) vfprintf (stderr, fmt, args); -+ va_end (args); -+} -+#else -+# define LTWRAPPER_DEBUGPRINTF(args) -+#endif -+ - const char *program_name = NULL; - --void * xmalloc (size_t num); --char * xstrdup (const char *string); --char * basename (const char *name); --char * fnqualify(const char *path); --char * strendzap(char *str, const char *pat); -+void *xmalloc (size_t num); -+char *xstrdup (const char *string); -+const char *base_name (const char *name); -+char *find_executable (const char *wrapper); -+char *chase_symlinks (const char *pathspec); -+int make_executable (const char *path); -+int check_executable (const char *path); -+char *strendzap (char *str, const char *pat); - void lt_fatal (const char *message, ...); -+void lt_setenv (const char *name, const char *value); -+char *lt_extend_str (const char *orig_value, const char *add, int to_end); -+void lt_opt_process_env_set (const char *arg); -+void lt_opt_process_env_prepend (const char *arg); -+void lt_opt_process_env_append (const char *arg); -+int lt_split_name_value (const char *arg, char** name, char** value); -+void lt_update_exe_path (const char *name, const char *value); -+void lt_update_lib_path (const char *name, const char *value); - --int --main (int argc, char *argv[]) --{ -- char **newargz; -- int i; -+static const char *script_text_part1 = -+EOF -+ -+ func_emit_wrapper_part1 yes | -+ $SED -e 's/$[\\"]$/\\\1/g' \ -+ -e 's/^/ "/' -e 's/$/\\n"/' -+ echo ";" -+ cat <> $cwrappersource <> $cwrappersource <<"EOF" -- newargz[1] = fnqualify(argv[0]); -- /* we know the script has the same name, without the .exe */ -- /* so make sure newargz[1] doesn't end in .exe */ -- strendzap(newargz[1],".exe"); -- for (i = 1; i < argc; i++) -- newargz[i+1] = xstrdup(argv[i]); -- newargz[argc+1] = NULL; -+ if test -n "$dllsearchpath"; then -+ func_to_host_pathlist "$dllsearchpath:" -+ cat <> $cwrappersource <> $cwrappersource <<"EOF" --} - --void * --xmalloc (size_t num) --{ -- void * p = (void *) malloc (num); -- if (!p) -- lt_fatal ("Memory exhausted"); -+ cat <<"EOF" - -- return p; --} -+#define LTWRAPPER_OPTION_PREFIX "--lt-" -+#define LTWRAPPER_OPTION_PREFIX_LENGTH 5 - --char * --xstrdup (const char *string) --{ -- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL --; --} -+static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH; -+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; - --char * --basename (const char *name) --{ -- const char *base; -+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; - --#if defined (HAVE_DOS_BASED_FILE_SYSTEM) -- /* Skip over the disk name in MSDOS pathnames. */ -- if (isalpha (name[0]) && name[1] == ':') -- name += 2; --#endif -+static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7; -+static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set"; -+ /* argument is putenv-style "foo=bar", value of foo is set to bar */ - -- for (base = name; *name; name++) -- if (IS_DIR_SEPARATOR (*name)) -+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11; -+static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend"; -+ /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */ -+ -+static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10; -+static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append"; -+ /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */ -+ -+int -+main (int argc, char *argv[]) -+{ -+ char **newargz; -+ int newargc; -+ char *tmp_pathspec; -+ char *actual_cwrapper_path; -+ char *actual_cwrapper_name; -+ char *target_name; -+ char *lt_argv_zero; -+ intptr_t rval = 127; -+ -+ int i; -+ -+ program_name = (char *) xstrdup (base_name (argv[0])); -+ LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); -+ LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); -+ -+ /* very simple arg parsing; don't want to rely on getopt */ -+ for (i = 1; i < argc; i++) -+ { -+ if (strcmp (argv[i], dumpscript_opt) == 0) -+ { -+EOF -+ case "$host" in -+ *mingw* | *cygwin* ) -+ # make stdout use "unix" line endings -+ echo " setmode(1,_O_BINARY);" -+ ;; -+ esac -+ -+ cat <<"EOF" -+ printf ("%s", script_text_part1); -+ printf ("%s", script_text_part2); -+ return 0; -+ } -+ } -+ -+ newargz = XMALLOC (char *, argc + 1); -+ tmp_pathspec = find_executable (argv[0]); -+ if (tmp_pathspec == NULL) -+ lt_fatal ("Couldn't find %s", argv[0]); -+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", -+ tmp_pathspec)); -+ -+ actual_cwrapper_path = chase_symlinks (tmp_pathspec); -+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", -+ actual_cwrapper_path)); -+ XFREE (tmp_pathspec); -+ -+ actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path)); -+ strendzap (actual_cwrapper_path, actual_cwrapper_name); -+ -+ /* wrapper name transforms */ -+ strendzap (actual_cwrapper_name, ".exe"); -+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1); -+ XFREE (actual_cwrapper_name); -+ actual_cwrapper_name = tmp_pathspec; -+ tmp_pathspec = 0; -+ -+ /* target_name transforms -- use actual target program name; might have lt- prefix */ -+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME)); -+ strendzap (target_name, ".exe"); -+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1); -+ XFREE (target_name); -+ target_name = tmp_pathspec; -+ tmp_pathspec = 0; -+ -+ LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n", -+ target_name)); -+EOF -+ -+ cat <"))); -+ for (i = 0; i < newargc; i++) -+ { -+ LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : ""))); -+ } -+ -+EOF -+ -+ case $host_os in -+ mingw*) -+ cat <<"EOF" -+ /* execv doesn't actually work on mingw as expected on unix */ -+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); -+ if (rval == -1) -+ { -+ /* failed to start process */ -+ LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); -+ return 127; -+ } -+ return rval; -+EOF -+ ;; -+ *) -+ cat <<"EOF" -+ execv (lt_argv_zero, newargz); -+ return rval; /* =127, but avoids unused variable warning */ -+EOF -+ ;; -+ esac -+ -+ cat <<"EOF" -+} -+ -+void * -+xmalloc (size_t num) -+{ -+ void *p = (void *) malloc (num); -+ if (!p) -+ lt_fatal ("Memory exhausted"); -+ -+ return p; -+} -+ -+char * -+xstrdup (const char *string) -+{ -+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), -+ string) : NULL; -+} -+ -+const char * -+base_name (const char *name) -+{ -+ const char *base; -+ -+#if defined (HAVE_DOS_BASED_FILE_SYSTEM) -+ /* Skip over the disk name in MSDOS pathnames. */ -+ if (isalpha ((unsigned char) name[0]) && name[1] == ':') -+ name += 2; -+#endif -+ -+ for (base = name; *name; name++) -+ if (IS_DIR_SEPARATOR (*name)) - base = name + 1; -- return (char *) base; -+ return base; -+} -+ -+int -+check_executable (const char *path) -+{ -+ struct stat st; -+ -+ LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", -+ path ? (*path ? path : "EMPTY!") : "NULL!")); -+ if ((!path) || (!*path)) -+ return 0; -+ -+ if ((stat (path, &st) >= 0) -+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) -+ return 1; -+ else -+ return 0; - } - -+int -+make_executable (const char *path) -+{ -+ int rval = 0; -+ struct stat st; -+ -+ LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", -+ path ? (*path ? path : "EMPTY!") : "NULL!")); -+ if ((!path) || (!*path)) -+ return 0; -+ -+ if (stat (path, &st) >= 0) -+ { -+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); -+ } -+ return rval; -+} -+ -+/* Searches for the full path of the wrapper. Returns -+ newly allocated full path name if found, NULL otherwise -+ Does not chase symlinks, even on platforms that support them. -+*/ - char * --fnqualify(const char *path) -+find_executable (const char *wrapper) - { -- size_t size; -- char *p; -+ int has_slash = 0; -+ const char *p; -+ const char *p_next; -+ /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; -+ int tmp_len; -+ char *concat_name; -+ -+ LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", -+ wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); - -- assert(path != NULL); -+ if ((wrapper == NULL) || (*wrapper == '\0')) -+ return NULL; - -- /* Is it qualified already? */ -+ /* Absolute path? */ - #if defined (HAVE_DOS_BASED_FILE_SYSTEM) -- if (isalpha (path[0]) && path[1] == ':') -- return xstrdup (path); -+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') -+ { -+ concat_name = xstrdup (wrapper); -+ if (check_executable (concat_name)) -+ return concat_name; -+ XFREE (concat_name); -+ } -+ else -+ { -+#endif -+ if (IS_DIR_SEPARATOR (wrapper[0])) -+ { -+ concat_name = xstrdup (wrapper); -+ if (check_executable (concat_name)) -+ return concat_name; -+ XFREE (concat_name); -+ } -+#if defined (HAVE_DOS_BASED_FILE_SYSTEM) -+ } - #endif -- if (IS_DIR_SEPARATOR (path[0])) -- return xstrdup (path); - -- /* prepend the current directory */ -- /* doesn't handle '~' */ -+ for (p = wrapper; *p; p++) -+ if (*p == '/') -+ { -+ has_slash = 1; -+ break; -+ } -+ if (!has_slash) -+ { -+ /* no slashes; search PATH */ -+ const char *path = getenv ("PATH"); -+ if (path != NULL) -+ { -+ for (p = path; *p; p = p_next) -+ { -+ const char *q; -+ size_t p_len; -+ for (q = p; *q; q++) -+ if (IS_PATH_SEPARATOR (*q)) -+ break; -+ p_len = q - p; -+ p_next = (*q == '\0' ? q : q + 1); -+ if (p_len == 0) -+ { -+ /* empty path: current directory */ -+ if (getcwd (tmp, LT_PATHMAX) == NULL) -+ lt_fatal ("getcwd failed"); -+ tmp_len = strlen (tmp); -+ concat_name = -+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); -+ memcpy (concat_name, tmp, tmp_len); -+ concat_name[tmp_len] = '/'; -+ strcpy (concat_name + tmp_len + 1, wrapper); -+ } -+ else -+ { -+ concat_name = -+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); -+ memcpy (concat_name, p, p_len); -+ concat_name[p_len] = '/'; -+ strcpy (concat_name + p_len + 1, wrapper); -+ } -+ if (check_executable (concat_name)) -+ return concat_name; -+ XFREE (concat_name); -+ } -+ } -+ /* not found in PATH; assume curdir */ -+ } -+ /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); -- size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */ -- p = XMALLOC(char, size); -- sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path); -- return p; -+ tmp_len = strlen (tmp); -+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); -+ memcpy (concat_name, tmp, tmp_len); -+ concat_name[tmp_len] = '/'; -+ strcpy (concat_name + tmp_len + 1, wrapper); -+ -+ if (check_executable (concat_name)) -+ return concat_name; -+ XFREE (concat_name); -+ return NULL; -+} -+ -+char * -+chase_symlinks (const char *pathspec) -+{ -+#ifndef S_ISLNK -+ return xstrdup (pathspec); -+#else -+ char buf[LT_PATHMAX]; -+ struct stat s; -+ char *tmp_pathspec = xstrdup (pathspec); -+ char *p; -+ int has_symlinks = 0; -+ while (strlen (tmp_pathspec) && !has_symlinks) -+ { -+ LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", -+ tmp_pathspec)); -+ if (lstat (tmp_pathspec, &s) == 0) -+ { -+ if (S_ISLNK (s.st_mode) != 0) -+ { -+ has_symlinks = 1; -+ break; -+ } -+ -+ /* search backwards for last DIR_SEPARATOR */ -+ p = tmp_pathspec + strlen (tmp_pathspec) - 1; -+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) -+ p--; -+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) -+ { -+ /* no more DIR_SEPARATORS left */ -+ break; -+ } -+ *p = '\0'; -+ } -+ else -+ { -+ char *errstr = strerror (errno); -+ lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); -+ } -+ } -+ XFREE (tmp_pathspec); -+ -+ if (!has_symlinks) -+ { -+ return xstrdup (pathspec); -+ } -+ -+ tmp_pathspec = realpath (pathspec, buf); -+ if (tmp_pathspec == 0) -+ { -+ lt_fatal ("Could not follow symlinks for %s", pathspec); -+ } -+ return xstrdup (tmp_pathspec); -+#endif - } - - char * --strendzap(char *str, const char *pat) -+strendzap (char *str, const char *pat) - { - size_t len, patlen; - -- assert(str != NULL); -- assert(pat != NULL); -+ assert (str != NULL); -+ assert (pat != NULL); - -- len = strlen(str); -- patlen = strlen(pat); -+ len = strlen (str); -+ patlen = strlen (pat); - - if (patlen <= len) -- { -- str += len - patlen; -- if (strcmp(str, pat) == 0) -- *str = '\0'; -- } -+ { -+ str += len - patlen; -+ if (strcmp (str, pat) == 0) -+ *str = '\0'; -+ } - return str; - } - - static void --lt_error_core (int exit_status, const char * mode, -- const char * message, va_list ap) -+lt_error_core (int exit_status, const char *mode, -+ const char *message, va_list ap) - { - fprintf (stderr, "%s: %s: ", program_name, mode); - vfprintf (stderr, message, ap); -@@ -4783,1230 +3853,4351 @@ lt_fatal (const char *message, ...) - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); - va_end (ap); - } -+ -+void -+lt_setenv (const char *name, const char *value) -+{ -+ LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", -+ (name ? name : ""), -+ (value ? value : ""))); -+ { -+#ifdef HAVE_SETENV -+ /* always make a copy, for consistency with !HAVE_SETENV */ -+ char *str = xstrdup (value); -+ setenv (name, str, 1); -+#else -+ int len = strlen (name) + 1 + strlen (value) + 1; -+ char *str = XMALLOC (char, len); -+ sprintf (str, "%s=%s", name, value); -+ if (putenv (str) != EXIT_SUCCESS) -+ { -+ XFREE (str); -+ } -+#endif -+ } -+} -+ -+char * -+lt_extend_str (const char *orig_value, const char *add, int to_end) -+{ -+ char *new_value; -+ if (orig_value && *orig_value) -+ { -+ int orig_value_len = strlen (orig_value); -+ int add_len = strlen (add); -+ new_value = XMALLOC (char, add_len + orig_value_len + 1); -+ if (to_end) -+ { -+ strcpy (new_value, orig_value); -+ strcpy (new_value + orig_value_len, add); -+ } -+ else -+ { -+ strcpy (new_value, add); -+ strcpy (new_value + add_len, orig_value); -+ } -+ } -+ else -+ { -+ new_value = xstrdup (add); -+ } -+ return new_value; -+} -+ -+int -+lt_split_name_value (const char *arg, char** name, char** value) -+{ -+ const char *p; -+ int len; -+ if (!arg || !*arg) -+ return 1; -+ -+ p = strchr (arg, (int)'='); -+ -+ if (!p) -+ return 1; -+ -+ *value = xstrdup (++p); -+ -+ len = strlen (arg) - strlen (*value); -+ *name = XMALLOC (char, len); -+ strncpy (*name, arg, len-1); -+ (*name)[len - 1] = '\0'; -+ -+ return 0; -+} -+ -+void -+lt_opt_process_env_set (const char *arg) -+{ -+ char *name = NULL; -+ char *value = NULL; -+ -+ if (lt_split_name_value (arg, &name, &value) != 0) -+ { -+ XFREE (name); -+ XFREE (value); -+ lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); -+ } -+ -+ lt_setenv (name, value); -+ XFREE (name); -+ XFREE (value); -+} -+ -+void -+lt_opt_process_env_prepend (const char *arg) -+{ -+ char *name = NULL; -+ char *value = NULL; -+ char *new_value = NULL; -+ -+ if (lt_split_name_value (arg, &name, &value) != 0) -+ { -+ XFREE (name); -+ XFREE (value); -+ lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); -+ } -+ -+ new_value = lt_extend_str (getenv (name), value, 0); -+ lt_setenv (name, new_value); -+ XFREE (new_value); -+ XFREE (name); -+ XFREE (value); -+} -+ -+void -+lt_opt_process_env_append (const char *arg) -+{ -+ char *name = NULL; -+ char *value = NULL; -+ char *new_value = NULL; -+ -+ if (lt_split_name_value (arg, &name, &value) != 0) -+ { -+ XFREE (name); -+ XFREE (value); -+ lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); -+ } -+ -+ new_value = lt_extend_str (getenv (name), value, 1); -+ lt_setenv (name, new_value); -+ XFREE (new_value); -+ XFREE (name); -+ XFREE (value); -+} -+ -+void -+lt_update_exe_path (const char *name, const char *value) -+{ -+ LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", -+ (name ? name : ""), -+ (value ? value : ""))); -+ -+ if (name && *name && value && *value) -+ { -+ char *new_value = lt_extend_str (getenv (name), value, 0); -+ /* some systems can't cope with a ':'-terminated path #' */ -+ int len = strlen (new_value); -+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) -+ { -+ new_value[len-1] = '\0'; -+ } -+ lt_setenv (name, new_value); -+ XFREE (new_value); -+ } -+} -+ -+void -+lt_update_lib_path (const char *name, const char *value) -+{ -+ LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", -+ (name ? name : ""), -+ (value ? value : ""))); -+ -+ if (name && *name && value && *value) -+ { -+ char *new_value = lt_extend_str (getenv (name), value, 0); -+ lt_setenv (name, new_value); -+ XFREE (new_value); -+ } -+} -+ -+ - EOF -- # we should really use a build-platform specific compiler -- # here, but OTOH, the wrappers (shell script and this C one) -- # are only useful if you want to execute the "real" binary. -- # Since the "real" binary is built for $host, then this -- # wrapper might as well be built for $host, too. -- $run $LTCC -s -o $cwrapper $cwrappersource -+} -+# end: func_emit_cwrapperexe_src -+ -+# func_mode_link arg... -+func_mode_link () -+{ -+ $opt_debug -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) -+ # It is impossible to link a dll without this setting, and -+ # we shouldn't force the makefile maintainer to figure out -+ # which system we are compiling for in order to pass an extra -+ # flag for every libtool invocation. -+ # allow_undefined=no -+ -+ # FIXME: Unfortunately, there are problems with the above when trying -+ # to make a dll which has undefined symbols, in which case not -+ # even a static library is built. For now, we need to specify -+ # -no-undefined on the libtool link line when we can be certain -+ # that all symbols are satisfied, otherwise we get a static library. -+ allow_undefined=yes -+ ;; -+ *) -+ allow_undefined=yes -+ ;; -+ esac -+ libtool_args=$nonopt -+ base_compile="$nonopt $@" -+ compile_command=$nonopt -+ finalize_command=$nonopt -+ -+ compile_rpath= -+ finalize_rpath= -+ compile_shlibpath= -+ finalize_shlibpath= -+ convenience= -+ old_convenience= -+ deplibs= -+ old_deplibs= -+ compiler_flags= -+ linker_flags= -+ dllsearchpath= -+ lib_search_path=`pwd` -+ inst_prefix_dir= -+ new_inherited_linker_flags= -+ -+ avoid_version=no -+ dlfiles= -+ dlprefiles= -+ dlself=no -+ export_dynamic=no -+ export_symbols= -+ export_symbols_regex= -+ generated= -+ libobjs= -+ ltlibs= -+ module=no -+ no_install=no -+ objs= -+ non_pic_objects= -+ precious_files_regex= -+ prefer_static_libs=no -+ preload=no -+ prev= -+ prevarg= -+ release= -+ rpath= -+ xrpath= -+ perm_rpath= -+ temp_rpath= -+ thread_safe=no -+ vinfo= -+ vinfo_number=no -+ weak_libs= -+ single_module="${wl}-single_module" -+ func_infer_tag $base_compile -+ -+ # We need to know -static, to get the right output filenames. -+ for arg -+ do -+ case $arg in -+ -shared) -+ test "$build_libtool_libs" != yes && \ -+ func_fatal_configuration "can not build a shared library" -+ build_old_libs=no -+ break -+ ;; -+ -all-static | -static | -static-libtool-libs) -+ case $arg in -+ -all-static) -+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then -+ func_warning "complete static linking is impossible in this configuration" -+ fi -+ if test -n "$link_static_flag"; then -+ dlopen_self=$dlopen_self_static -+ fi -+ prefer_static_libs=yes -+ ;; -+ -static) -+ if test -z "$pic_flag" && test -n "$link_static_flag"; then -+ dlopen_self=$dlopen_self_static -+ fi -+ prefer_static_libs=built -+ ;; -+ -static-libtool-libs) -+ if test -z "$pic_flag" && test -n "$link_static_flag"; then -+ dlopen_self=$dlopen_self_static -+ fi -+ prefer_static_libs=yes -+ ;; -+ esac -+ build_libtool_libs=no -+ build_old_libs=yes -+ break -+ ;; -+ esac -+ done -+ -+ # See if our shared archives depend on static archives. -+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes -+ -+ # Go through the arguments, transforming them on the way. -+ while test "$#" -gt 0; do -+ arg="$1" -+ shift -+ func_quote_for_eval "$arg" -+ qarg=$func_quote_for_eval_unquoted_result -+ func_append libtool_args " $func_quote_for_eval_result" -+ -+ # If the previous option needs an argument, assign it. -+ if test -n "$prev"; then -+ case $prev in -+ output) -+ func_append compile_command " @OUTPUT@" -+ func_append finalize_command " @OUTPUT@" -+ ;; -+ esac -+ -+ case $prev in -+ dlfiles|dlprefiles) -+ if test "$preload" = no; then -+ # Add the symbol object into the linking commands. -+ func_append compile_command " @SYMFILE@" -+ func_append finalize_command " @SYMFILE@" -+ preload=yes -+ fi -+ case $arg in -+ *.la | *.lo) ;; # We handle these cases below. -+ force) -+ if test "$dlself" = no; then -+ dlself=needless -+ export_dynamic=yes -+ fi -+ prev= -+ continue -+ ;; -+ self) -+ if test "$prev" = dlprefiles; then -+ dlself=yes -+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then -+ dlself=yes -+ else -+ dlself=needless -+ export_dynamic=yes -+ fi -+ prev= -+ continue -+ ;; -+ *) -+ if test "$prev" = dlfiles; then -+ dlfiles="$dlfiles $arg" -+ else -+ dlprefiles="$dlprefiles $arg" -+ fi -+ prev= -+ continue -+ ;; -+ esac -+ ;; -+ expsyms) -+ export_symbols="$arg" -+ test -f "$arg" \ -+ || func_fatal_error "symbol file \`$arg' does not exist" -+ prev= -+ continue -+ ;; -+ expsyms_regex) -+ export_symbols_regex="$arg" -+ prev= -+ continue -+ ;; -+ framework) -+ case $host in -+ *-*-darwin*) -+ case "$deplibs " in -+ *" $qarg.ltframework "*) ;; -+ *) deplibs="$deplibs $qarg.ltframework" # this is fixed later -+ ;; -+ esac -+ ;; -+ esac -+ prev= -+ continue -+ ;; -+ inst_prefix) -+ inst_prefix_dir="$arg" -+ prev= -+ continue -+ ;; -+ objectlist) -+ if test -f "$arg"; then -+ save_arg=$arg -+ moreargs= -+ for fil in `cat "$save_arg"` -+ do -+# moreargs="$moreargs $fil" -+ arg=$fil -+ # A libtool-controlled object. -+ -+ # Check to see that this really is a libtool object. -+ if func_lalib_unsafe_p "$arg"; then -+ pic_object= -+ non_pic_object= -+ -+ # Read the .lo file -+ func_source "$arg" -+ -+ if test -z "$pic_object" || -+ test -z "$non_pic_object" || -+ test "$pic_object" = none && -+ test "$non_pic_object" = none; then -+ func_fatal_error "cannot find name of object for \`$arg'" -+ fi -+ -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" -+ -+ if test "$pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ pic_object="$xdir$pic_object" -+ -+ if test "$prev" = dlfiles; then -+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -+ dlfiles="$dlfiles $pic_object" -+ prev= -+ continue -+ else -+ # If libtool objects are unsupported, then we need to preload. -+ prev=dlprefiles -+ fi -+ fi -+ -+ # CHECK ME: I think I busted this. -Ossama -+ if test "$prev" = dlprefiles; then -+ # Preload the old-style object. -+ dlprefiles="$dlprefiles $pic_object" -+ prev= -+ fi -+ -+ # A PIC object. -+ func_append libobjs " $pic_object" -+ arg="$pic_object" -+ fi -+ -+ # Non-PIC object. -+ if test "$non_pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ non_pic_object="$xdir$non_pic_object" -+ -+ # A standard non-PIC object -+ func_append non_pic_objects " $non_pic_object" -+ if test -z "$pic_object" || test "$pic_object" = none ; then -+ arg="$non_pic_object" -+ fi -+ else -+ # If the PIC object exists, use it instead. -+ # $xdir was prepended to $pic_object above. -+ non_pic_object="$pic_object" -+ func_append non_pic_objects " $non_pic_object" -+ fi -+ else -+ # Only an error if not doing a dry-run. -+ if $opt_dry_run; then -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" -+ -+ func_lo2o "$arg" -+ pic_object=$xdir$objdir/$func_lo2o_result -+ non_pic_object=$xdir$func_lo2o_result -+ func_append libobjs " $pic_object" -+ func_append non_pic_objects " $non_pic_object" -+ else -+ func_fatal_error "\`$arg' is not a valid libtool object" -+ fi -+ fi -+ done -+ else -+ func_fatal_error "link input file \`$arg' does not exist" -+ fi -+ arg=$save_arg -+ prev= -+ continue -+ ;; -+ precious_regex) -+ precious_files_regex="$arg" -+ prev= -+ continue -+ ;; -+ release) -+ release="-$arg" -+ prev= -+ continue -+ ;; -+ rpath | xrpath) -+ # We need an absolute path. -+ case $arg in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ func_fatal_error "only absolute run-paths are allowed" -+ ;; -+ esac -+ if test "$prev" = rpath; then -+ case "$rpath " in -+ *" $arg "*) ;; -+ *) rpath="$rpath $arg" ;; -+ esac -+ else -+ case "$xrpath " in -+ *" $arg "*) ;; -+ *) xrpath="$xrpath $arg" ;; -+ esac -+ fi -+ prev= -+ continue -+ ;; -+ shrext) -+ shrext_cmds="$arg" -+ prev= -+ continue -+ ;; -+ weak) -+ weak_libs="$weak_libs $arg" -+ prev= -+ continue -+ ;; -+ xcclinker) -+ linker_flags="$linker_flags $qarg" -+ compiler_flags="$compiler_flags $qarg" -+ prev= -+ func_append compile_command " $qarg" -+ func_append finalize_command " $qarg" -+ continue -+ ;; -+ xcompiler) -+ compiler_flags="$compiler_flags $qarg" -+ prev= -+ func_append compile_command " $qarg" -+ func_append finalize_command " $qarg" -+ continue -+ ;; -+ xlinker) -+ linker_flags="$linker_flags $qarg" -+ compiler_flags="$compiler_flags $wl$qarg" -+ prev= -+ func_append compile_command " $wl$qarg" -+ func_append finalize_command " $wl$qarg" -+ continue -+ ;; -+ *) -+ eval "$prev=\"\$arg\"" -+ prev= -+ continue -+ ;; -+ esac -+ fi # test -n "$prev" -+ -+ prevarg="$arg" -+ -+ case $arg in -+ -all-static) -+ if test -n "$link_static_flag"; then -+ # See comment for -static flag below, for more details. -+ func_append compile_command " $link_static_flag" -+ func_append finalize_command " $link_static_flag" -+ fi -+ continue -+ ;; -+ -+ -allow-undefined) -+ # FIXME: remove this flag sometime in the future. -+ func_fatal_error "\`-allow-undefined' must not be used because it is the default" -+ ;; -+ -+ -avoid-version) -+ avoid_version=yes -+ continue -+ ;; -+ -+ -dlopen) -+ prev=dlfiles -+ continue -+ ;; -+ -+ -dlpreopen) -+ prev=dlprefiles -+ continue -+ ;; -+ -+ -export-dynamic) -+ export_dynamic=yes -+ continue -+ ;; -+ -+ -export-symbols | -export-symbols-regex) -+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then -+ func_fatal_error "more than one -exported-symbols argument is not allowed" -+ fi -+ if test "X$arg" = "X-export-symbols"; then -+ prev=expsyms -+ else -+ prev=expsyms_regex -+ fi -+ continue -+ ;; -+ -+ -framework) -+ prev=framework -+ continue -+ ;; -+ -+ -inst-prefix-dir) -+ prev=inst_prefix -+ continue -+ ;; -+ -+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* -+ # so, if we see these flags be careful not to treat them like -L -+ -L[A-Z][A-Z]*:*) -+ case $with_gcc/$host in -+ no/*-*-irix* | /*-*-irix*) -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" -+ ;; -+ esac -+ continue -+ ;; -+ -+ -L*) -+ func_stripname '-L' '' "$arg" -+ dir=$func_stripname_result -+ if test -z "$dir"; then -+ if test "$#" -gt 0; then -+ func_fatal_error "require no space between \`-L' and \`$1'" -+ else -+ func_fatal_error "need path for \`-L' option" -+ fi -+ fi -+ # We need an absolute path. -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ absdir=`cd "$dir" && pwd` -+ test -z "$absdir" && \ -+ func_fatal_error "cannot determine absolute directory name of \`$dir'" -+ dir="$absdir" -+ ;; -+ esac -+ case "$deplibs " in -+ *" -L$dir "*) ;; -+ *) -+ deplibs="$deplibs -L$dir" -+ lib_search_path="$lib_search_path $dir" -+ ;; -+ esac -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) -+ testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` -+ case :$dllsearchpath: in -+ *":$dir:"*) ;; -+ ::) dllsearchpath=$dir;; -+ *) dllsearchpath="$dllsearchpath:$dir";; -+ esac -+ case :$dllsearchpath: in -+ *":$testbindir:"*) ;; -+ ::) dllsearchpath=$testbindir;; -+ *) dllsearchpath="$dllsearchpath:$testbindir";; -+ esac -+ ;; -+ esac -+ continue -+ ;; -+ -+ -l*) -+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) -+ # These systems don't actually have a C or math library (as such) -+ continue -+ ;; -+ *-*-os2*) -+ # These systems don't actually have a C library (as such) -+ test "X$arg" = "X-lc" && continue -+ ;; -+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) -+ # Do not include libc due to us having libc/libc_r. -+ test "X$arg" = "X-lc" && continue -+ ;; -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # Rhapsody C and math libraries are in the System framework -+ deplibs="$deplibs System.ltframework" -+ continue -+ ;; -+ *-*-sco3.2v5* | *-*-sco5v6*) -+ # Causes problems with __ctype -+ test "X$arg" = "X-lc" && continue -+ ;; -+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) -+ # Compiler inserts libc in the correct place for threads to work -+ test "X$arg" = "X-lc" && continue -+ ;; -+ esac -+ elif test "X$arg" = "X-lc_r"; then -+ case $host in -+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) -+ # Do not include libc_r directly, use -pthread flag. -+ continue -+ ;; -+ esac -+ fi -+ deplibs="$deplibs $arg" -+ continue -+ ;; -+ -+ -module) -+ module=yes -+ continue -+ ;; -+ -+ # Tru64 UNIX uses -model [arg] to determine the layout of C++ -+ # classes, name mangling, and exception handling. -+ # Darwin uses the -arch flag to determine output architecture. -+ -model|-arch|-isysroot) -+ compiler_flags="$compiler_flags $arg" -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" -+ prev=xcompiler -+ continue -+ ;; -+ -+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) -+ compiler_flags="$compiler_flags $arg" -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" -+ case "$new_inherited_linker_flags " in -+ *" $arg "*) ;; -+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; -+ esac -+ continue -+ ;; -+ -+ -multi_module) -+ single_module="${wl}-multi_module" -+ continue -+ ;; -+ -+ -no-fast-install) -+ fast_install=no -+ continue -+ ;; -+ -+ -no-install) -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) -+ # The PATH hackery in wrapper scripts is required on Windows -+ # and Darwin in order for the loader to find any dlls it needs. -+ func_warning "\`-no-install' is ignored for $host" -+ func_warning "assuming \`-no-fast-install' instead" -+ fast_install=no -+ ;; -+ *) no_install=yes ;; -+ esac -+ continue -+ ;; -+ -+ -no-undefined) -+ allow_undefined=no -+ continue -+ ;; -+ -+ -objectlist) -+ prev=objectlist -+ continue -+ ;; -+ -+ -o) prev=output ;; -+ -+ -precious-files-regex) -+ prev=precious_regex -+ continue -+ ;; -+ -+ -release) -+ prev=release -+ continue -+ ;; -+ -+ -rpath) -+ prev=rpath -+ continue -+ ;; -+ -+ -R) -+ prev=xrpath -+ continue -+ ;; -+ -+ -R*) -+ func_stripname '-R' '' "$arg" -+ dir=$func_stripname_result -+ # We need an absolute path. -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ func_fatal_error "only absolute run-paths are allowed" -+ ;; -+ esac -+ case "$xrpath " in -+ *" $dir "*) ;; -+ *) xrpath="$xrpath $dir" ;; -+ esac -+ continue -+ ;; -+ -+ -shared) -+ # The effects of -shared are defined in a previous loop. -+ continue -+ ;; -+ -+ -shrext) -+ prev=shrext -+ continue -+ ;; -+ -+ -static | -static-libtool-libs) -+ # The effects of -static are defined in a previous loop. -+ # We used to do the same as -all-static on platforms that -+ # didn't have a PIC flag, but the assumption that the effects -+ # would be equivalent was wrong. It would break on at least -+ # Digital Unix and AIX. -+ continue -+ ;; -+ -+ -thread-safe) -+ thread_safe=yes -+ continue -+ ;; -+ -+ -version-info) -+ prev=vinfo -+ continue -+ ;; -+ -+ -version-number) -+ prev=vinfo -+ vinfo_number=yes -+ continue -+ ;; -+ -+ -weak) -+ prev=weak -+ continue -+ ;; -+ -+ -Wc,*) -+ func_stripname '-Wc,' '' "$arg" -+ args=$func_stripname_result -+ arg= -+ save_ifs="$IFS"; IFS=',' -+ for flag in $args; do -+ IFS="$save_ifs" -+ func_quote_for_eval "$flag" -+ arg="$arg $wl$func_quote_for_eval_result" -+ compiler_flags="$compiler_flags $func_quote_for_eval_result" -+ done -+ IFS="$save_ifs" -+ func_stripname ' ' '' "$arg" -+ arg=$func_stripname_result -+ ;; -+ -+ -Wl,*) -+ func_stripname '-Wl,' '' "$arg" -+ args=$func_stripname_result -+ arg= -+ save_ifs="$IFS"; IFS=',' -+ for flag in $args; do -+ IFS="$save_ifs" -+ func_quote_for_eval "$flag" -+ arg="$arg $wl$func_quote_for_eval_result" -+ compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" -+ linker_flags="$linker_flags $func_quote_for_eval_result" -+ done -+ IFS="$save_ifs" -+ func_stripname ' ' '' "$arg" -+ arg=$func_stripname_result -+ ;; -+ -+ -Xcompiler) -+ prev=xcompiler -+ continue -+ ;; -+ -+ -Xlinker) -+ prev=xlinker -+ continue -+ ;; -+ -+ -XCClinker) -+ prev=xcclinker -+ continue -+ ;; -+ -+ # -msg_* for osf cc -+ -msg_*) -+ func_quote_for_eval "$arg" -+ arg="$func_quote_for_eval_result" -+ ;; -+ -+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler -+ # -r[0-9][0-9]* specifies the processor on the SGI compiler -+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler -+ # +DA*, +DD* enable 64-bit mode on the HP compiler -+ # -q* pass through compiler args for the IBM compiler -+ # -m*, -t[45]*, -txscale* pass through architecture-specific -+ # compiler args for GCC -+ # -F/path gives path to uninstalled frameworks, gcc on darwin -+ # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC -+ # @file GCC response files -+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) -+ func_quote_for_eval "$arg" -+ arg="$func_quote_for_eval_result" -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" -+ compiler_flags="$compiler_flags $arg" -+ continue -+ ;; -+ -+ # Some other compiler flag. -+ -* | +*) -+ func_quote_for_eval "$arg" -+ arg="$func_quote_for_eval_result" -+ ;; -+ -+ *.$objext) -+ # A standard object. -+ objs="$objs $arg" -+ ;; -+ -+ *.lo) -+ # A libtool-controlled object. -+ -+ # Check to see that this really is a libtool object. -+ if func_lalib_unsafe_p "$arg"; then -+ pic_object= -+ non_pic_object= -+ -+ # Read the .lo file -+ func_source "$arg" -+ -+ if test -z "$pic_object" || -+ test -z "$non_pic_object" || -+ test "$pic_object" = none && -+ test "$non_pic_object" = none; then -+ func_fatal_error "cannot find name of object for \`$arg'" -+ fi -+ -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" -+ -+ if test "$pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ pic_object="$xdir$pic_object" -+ -+ if test "$prev" = dlfiles; then -+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -+ dlfiles="$dlfiles $pic_object" -+ prev= -+ continue -+ else -+ # If libtool objects are unsupported, then we need to preload. -+ prev=dlprefiles -+ fi -+ fi -+ -+ # CHECK ME: I think I busted this. -Ossama -+ if test "$prev" = dlprefiles; then -+ # Preload the old-style object. -+ dlprefiles="$dlprefiles $pic_object" -+ prev= -+ fi -+ -+ # A PIC object. -+ func_append libobjs " $pic_object" -+ arg="$pic_object" -+ fi -+ -+ # Non-PIC object. -+ if test "$non_pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ non_pic_object="$xdir$non_pic_object" -+ -+ # A standard non-PIC object -+ func_append non_pic_objects " $non_pic_object" -+ if test -z "$pic_object" || test "$pic_object" = none ; then -+ arg="$non_pic_object" -+ fi -+ else -+ # If the PIC object exists, use it instead. -+ # $xdir was prepended to $pic_object above. -+ non_pic_object="$pic_object" -+ func_append non_pic_objects " $non_pic_object" -+ fi -+ else -+ # Only an error if not doing a dry-run. -+ if $opt_dry_run; then -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" -+ -+ func_lo2o "$arg" -+ pic_object=$xdir$objdir/$func_lo2o_result -+ non_pic_object=$xdir$func_lo2o_result -+ func_append libobjs " $pic_object" -+ func_append non_pic_objects " $non_pic_object" -+ else -+ func_fatal_error "\`$arg' is not a valid libtool object" -+ fi -+ fi -+ ;; -+ -+ *.$libext) -+ # An archive. -+ deplibs="$deplibs $arg" -+ old_deplibs="$old_deplibs $arg" -+ continue -+ ;; -+ -+ *.la) -+ # A libtool-controlled library. -+ -+ if test "$prev" = dlfiles; then -+ # This library was specified with -dlopen. -+ dlfiles="$dlfiles $arg" -+ prev= -+ elif test "$prev" = dlprefiles; then -+ # The library was specified with -dlpreopen. -+ dlprefiles="$dlprefiles $arg" -+ prev= -+ else -+ deplibs="$deplibs $arg" -+ fi -+ continue -+ ;; -+ -+ # Some other compiler argument. -+ *) -+ # Unknown arguments in both finalize_command and compile_command need -+ # to be aesthetically quoted because they are evaled later. -+ func_quote_for_eval "$arg" -+ arg="$func_quote_for_eval_result" -+ ;; -+ esac # arg -+ -+ # Now actually substitute the argument into the commands. -+ if test -n "$arg"; then -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" -+ fi -+ done # argument parsing loop -+ -+ test -n "$prev" && \ -+ func_fatal_help "the \`$prevarg' option requires an argument" -+ -+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then -+ eval arg=\"$export_dynamic_flag_spec\" -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" -+ fi -+ -+ oldlibs= -+ # calculate the name of the file, without its directory -+ func_basename "$output" -+ outputname="$func_basename_result" -+ libobjs_save="$libobjs" -+ -+ if test -n "$shlibpath_var"; then -+ # get the directories listed in $shlibpath_var -+ eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` -+ else -+ shlib_search_path= -+ fi -+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\" -+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" -+ -+ func_dirname "$output" "/" "" -+ output_objdir="$func_dirname_result$objdir" -+ # Create the object directory. -+ func_mkdir_p "$output_objdir" -+ -+ # Determine the type of output -+ case $output in -+ "") -+ func_fatal_help "you must specify an output file" -+ ;; -+ *.$libext) linkmode=oldlib ;; -+ *.lo | *.$objext) linkmode=obj ;; -+ *.la) linkmode=lib ;; -+ *) linkmode=prog ;; # Anything else should be a program. -+ esac -+ -+ specialdeplibs= -+ -+ libs= -+ # Find all interdependent deplibs by searching for libraries -+ # that are linked more than once (e.g. -la -lb -la) -+ for deplib in $deplibs; do -+ if $opt_duplicate_deps ; then -+ case "$libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac -+ fi -+ libs="$libs $deplib" -+ done -+ -+ if test "$linkmode" = lib; then -+ libs="$predeps $libs $compiler_lib_search_path $postdeps" -+ -+ # Compute libraries that are listed more than once in $predeps -+ # $postdeps and mark them as special (i.e., whose duplicates are -+ # not to be eliminated). -+ pre_post_deps= -+ if $opt_duplicate_compiler_generated_deps; then -+ for pre_post_dep in $predeps $postdeps; do -+ case "$pre_post_deps " in -+ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; -+ esac -+ pre_post_deps="$pre_post_deps $pre_post_dep" -+ done -+ fi -+ pre_post_deps= -+ fi -+ -+ deplibs= -+ newdependency_libs= -+ newlib_search_path= -+ need_relink=no # whether we're linking any uninstalled libtool libraries -+ notinst_deplibs= # not-installed libtool libraries -+ notinst_path= # paths that contain not-installed libtool libraries -+ -+ case $linkmode in -+ lib) -+ passes="conv dlpreopen link" -+ for file in $dlfiles $dlprefiles; do -+ case $file in -+ *.la) ;; -+ *) -+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" -+ ;; -+ esac -+ done -+ ;; -+ prog) -+ compile_deplibs= -+ finalize_deplibs= -+ alldeplibs=no -+ newdlfiles= -+ newdlprefiles= -+ passes="conv scan dlopen dlpreopen link" -+ ;; -+ *) passes="conv" -+ ;; -+ esac -+ -+ for pass in $passes; do -+ # The preopen pass in lib mode reverses $deplibs; put it back here -+ # so that -L comes before libs that need it for instance... -+ if test "$linkmode,$pass" = "lib,link"; then -+ ## FIXME: Find the place where the list is rebuilt in the wrong -+ ## order, and fix it there properly -+ tmp_deplibs= -+ for deplib in $deplibs; do -+ tmp_deplibs="$deplib $tmp_deplibs" -+ done -+ deplibs="$tmp_deplibs" -+ fi -+ -+ if test "$linkmode,$pass" = "lib,link" || -+ test "$linkmode,$pass" = "prog,scan"; then -+ libs="$deplibs" -+ deplibs= -+ fi -+ if test "$linkmode" = prog; then -+ case $pass in -+ dlopen) libs="$dlfiles" ;; -+ dlpreopen) libs="$dlprefiles" ;; -+ link) -+ libs="$deplibs %DEPLIBS%" -+ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" -+ ;; -+ esac -+ fi -+ if test "$linkmode,$pass" = "lib,dlpreopen"; then -+ # Collect and forward deplibs of preopened libtool libs -+ for lib in $dlprefiles; do -+ # Ignore non-libtool-libs -+ dependency_libs= -+ case $lib in -+ *.la) func_source "$lib" ;; -+ esac -+ -+ # Collect preopened libtool deplibs, except any this library -+ # has declared as weak libs -+ for deplib in $dependency_libs; do -+ deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` -+ case " $weak_libs " in -+ *" $deplib_base "*) ;; -+ *) deplibs="$deplibs $deplib" ;; -+ esac -+ done -+ done -+ libs="$dlprefiles" -+ fi -+ if test "$pass" = dlopen; then -+ # Collect dlpreopened libraries -+ save_deplibs="$deplibs" -+ deplibs= -+ fi -+ -+ for deplib in $libs; do -+ lib= -+ found=no -+ case $deplib in -+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ compiler_flags="$compiler_flags $deplib" -+ if test "$linkmode" = lib ; then -+ case "$new_inherited_linker_flags " in -+ *" $deplib "*) ;; -+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; -+ esac -+ fi -+ fi -+ continue -+ ;; -+ -l*) -+ if test "$linkmode" != lib && test "$linkmode" != prog; then -+ func_warning "\`-l' is ignored for archives/objects" -+ continue -+ fi -+ func_stripname '-l' '' "$deplib" -+ name=$func_stripname_result -+ if test "$linkmode" = lib; then -+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" -+ else -+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" -+ fi -+ for searchdir in $searchdirs; do -+ for search_ext in .la $std_shrext .so .a; do -+ # Search the libtool library -+ lib="$searchdir/lib${name}${search_ext}" -+ if test -f "$lib"; then -+ if test "$search_ext" = ".la"; then -+ found=yes -+ else -+ found=no -+ fi -+ break 2 -+ fi -+ done -+ done -+ if test "$found" != yes; then -+ # deplib doesn't seem to be a libtool library -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ deplibs="$deplib $deplibs" -+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" -+ fi -+ continue -+ else # deplib is a libtool library -+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, -+ # We need to do some special things here, and not later. -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ case " $predeps $postdeps " in -+ *" $deplib "*) -+ if func_lalib_p "$lib"; then -+ library_names= -+ old_library= -+ func_source "$lib" -+ for l in $old_library $library_names; do -+ ll="$l" -+ done -+ if test "X$ll" = "X$old_library" ; then # only static version available -+ found=no -+ func_dirname "$lib" "" "." -+ ladir="$func_dirname_result" -+ lib=$ladir/$old_library -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ deplibs="$deplib $deplibs" -+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" -+ fi -+ continue -+ fi -+ fi -+ ;; -+ *) ;; -+ esac -+ fi -+ fi -+ ;; # -l -+ *.ltframework) -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ deplibs="$deplib $deplibs" -+ if test "$linkmode" = lib ; then -+ case "$new_inherited_linker_flags " in -+ *" $deplib "*) ;; -+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; -+ esac -+ fi -+ fi -+ continue -+ ;; -+ -L*) -+ case $linkmode in -+ lib) -+ deplibs="$deplib $deplibs" -+ test "$pass" = conv && continue -+ newdependency_libs="$deplib $newdependency_libs" -+ func_stripname '-L' '' "$deplib" -+ newlib_search_path="$newlib_search_path $func_stripname_result" -+ ;; -+ prog) -+ if test "$pass" = conv; then -+ deplibs="$deplib $deplibs" -+ continue -+ fi -+ if test "$pass" = scan; then -+ deplibs="$deplib $deplibs" -+ else -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ fi -+ func_stripname '-L' '' "$deplib" -+ newlib_search_path="$newlib_search_path $func_stripname_result" -+ ;; -+ *) -+ func_warning "\`-L' is ignored for archives/objects" -+ ;; -+ esac # linkmode -+ continue -+ ;; # -L -+ -R*) -+ if test "$pass" = link; then -+ func_stripname '-R' '' "$deplib" -+ dir=$func_stripname_result -+ # Make sure the xrpath contains only unique directories. -+ case "$xrpath " in -+ *" $dir "*) ;; -+ *) xrpath="$xrpath $dir" ;; -+ esac -+ fi -+ deplibs="$deplib $deplibs" -+ continue -+ ;; -+ *.la) lib="$deplib" ;; -+ *.$libext) -+ if test "$pass" = conv; then -+ deplibs="$deplib $deplibs" -+ continue -+ fi -+ case $linkmode in -+ lib) -+ # Linking convenience modules into shared libraries is allowed, -+ # but linking other static libraries is non-portable. -+ case " $dlpreconveniencelibs " in -+ *" $deplib "*) ;; -+ *) -+ valid_a_lib=no -+ case $deplibs_check_method in -+ match_pattern*) -+ set dummy $deplibs_check_method; shift -+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 $.*$"` -+ if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ -+ | $EGREP "$match_pattern_regex" > /dev/null; then -+ valid_a_lib=yes -+ fi -+ ;; -+ pass_all) -+ valid_a_lib=yes -+ ;; -+ esac -+ if test "$valid_a_lib" != yes; then -+ $ECHO -+ $ECHO "*** Warning: Trying to link with static lib archive $deplib." -+ $ECHO "*** I have the capability to make that library automatically link in when" -+ $ECHO "*** you link to this library. But I can only do this if you have a" -+ $ECHO "*** shared version of the library, which you do not appear to have" -+ $ECHO "*** because the file extensions .$libext of this argument makes me believe" -+ $ECHO "*** that it is just a static archive that I should not use here." -+ else -+ $ECHO -+ $ECHO "*** Warning: Linking the shared library $output against the" -+ $ECHO "*** static library $deplib is not portable!" -+ deplibs="$deplib $deplibs" -+ fi -+ ;; -+ esac -+ continue -+ ;; -+ prog) -+ if test "$pass" != link; then -+ deplibs="$deplib $deplibs" -+ else -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ fi -+ continue -+ ;; -+ esac # linkmode -+ ;; # *.$libext -+ *.lo | *.$objext) -+ if test "$pass" = conv; then -+ deplibs="$deplib $deplibs" -+ elif test "$linkmode" = prog; then -+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then -+ # If there is no dlopen support or we're linking statically, -+ # we need to preload. -+ newdlprefiles="$newdlprefiles $deplib" -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ newdlfiles="$newdlfiles $deplib" -+ fi -+ fi -+ continue -+ ;; -+ %DEPLIBS%) -+ alldeplibs=yes -+ continue -+ ;; -+ esac # case $deplib -+ -+ if test "$found" = yes || test -f "$lib"; then : -+ else -+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" -+ fi -+ -+ # Check to see that this really is a libtool archive. -+ func_lalib_unsafe_p "$lib" \ -+ || func_fatal_error "\`$lib' is not a valid libtool archive" -+ -+ func_dirname "$lib" "" "." -+ ladir="$func_dirname_result" -+ -+ dlname= -+ dlopen= -+ dlpreopen= -+ libdir= -+ library_names= -+ old_library= -+ inherited_linker_flags= -+ # If the library was installed with an old release of libtool, -+ # it will not redefine variables installed, or shouldnotlink -+ installed=yes -+ shouldnotlink=no -+ avoidtemprpath= -+ -+ -+ # Read the .la file -+ func_source "$lib" -+ -+ # Convert "-framework foo" to "foo.ltframework" -+ if test -n "$inherited_linker_flags"; then -+ tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework $[^ $]*$/\1.ltframework/g'` -+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do -+ case " $new_inherited_linker_flags " in -+ *" $tmp_inherited_linker_flag "*) ;; -+ *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; -+ esac -+ done -+ fi -+ dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` -+ if test "$linkmode,$pass" = "lib,link" || -+ test "$linkmode,$pass" = "prog,scan" || -+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then -+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen" -+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" -+ fi -+ -+ if test "$pass" = conv; then -+ # Only check for convenience libraries -+ deplibs="$lib $deplibs" -+ if test -z "$libdir"; then -+ if test -z "$old_library"; then -+ func_fatal_error "cannot find name of link library for \`$lib'" -+ fi -+ # It is a libtool convenience library, so add in its objects. -+ convenience="$convenience $ladir/$objdir/$old_library" -+ old_convenience="$old_convenience $ladir/$objdir/$old_library" -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ deplibs="$deplib $deplibs" -+ if $opt_duplicate_deps ; then -+ case "$tmp_libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac -+ fi -+ tmp_libs="$tmp_libs $deplib" -+ done -+ elif test "$linkmode" != prog && test "$linkmode" != lib; then -+ func_fatal_error "\`$lib' is not a convenience library" -+ fi -+ continue -+ fi # $pass = conv -+ -+ -+ # Get the name of the library we link against. -+ linklib= -+ for l in $old_library $library_names; do -+ linklib="$l" -+ done -+ if test -z "$linklib"; then -+ func_fatal_error "cannot find name of link library for \`$lib'" -+ fi -+ -+ # This library was specified with -dlopen. -+ if test "$pass" = dlopen; then -+ if test -z "$libdir"; then -+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'" -+ fi -+ if test -z "$dlname" || -+ test "$dlopen_support" != yes || -+ test "$build_libtool_libs" = no; then -+ # If there is no dlname, no dlopen support or we're linking -+ # statically, we need to preload. We also need to preload any -+ # dependent libraries so libltdl's deplib preloader doesn't -+ # bomb out in the load deplibs phase. -+ dlprefiles="$dlprefiles $lib $dependency_libs" -+ else -+ newdlfiles="$newdlfiles $lib" -+ fi -+ continue -+ fi # $pass = dlopen -+ -+ # We need an absolute path. -+ case $ladir in -+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; -+ *) -+ abs_ladir=`cd "$ladir" && pwd` -+ if test -z "$abs_ladir"; then -+ func_warning "cannot determine absolute directory name of \`$ladir'" -+ func_warning "passing it literally to the linker, although it might fail" -+ abs_ladir="$ladir" -+ fi -+ ;; -+ esac -+ func_basename "$lib" -+ laname="$func_basename_result" -+ -+ # Find the relevant object directory and library name. -+ if test "X$installed" = Xyes; then -+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then -+ func_warning "library \`$lib' was moved." -+ dir="$ladir" -+ absdir="$abs_ladir" -+ libdir="$abs_ladir" -+ else -+ dir="$libdir" -+ absdir="$libdir" -+ fi -+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes -+ else -+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then -+ dir="$ladir" -+ absdir="$abs_ladir" -+ # Remove this search path later -+ notinst_path="$notinst_path $abs_ladir" -+ else -+ dir="$ladir/$objdir" -+ absdir="$abs_ladir/$objdir" -+ # Remove this search path later -+ notinst_path="$notinst_path $abs_ladir" -+ fi -+ fi # $installed = yes -+ func_stripname 'lib' '.la' "$laname" -+ name=$func_stripname_result -+ -+ # This library was specified with -dlpreopen. -+ if test "$pass" = dlpreopen; then -+ if test -z "$libdir" && test "$linkmode" = prog; then -+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" -+ fi -+ # Prefer using a static library (so that no silly _DYNAMIC symbols -+ # are required to link). -+ if test -n "$old_library"; then -+ newdlprefiles="$newdlprefiles $dir/$old_library" -+ # Keep a list of preopened convenience libraries to check -+ # that they are being used correctly in the link pass. -+ test -z "$libdir" && \ -+ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" -+ # Otherwise, use the dlname, so that lt_dlopen finds it. -+ elif test -n "$dlname"; then -+ newdlprefiles="$newdlprefiles $dir/$dlname" -+ else -+ newdlprefiles="$newdlprefiles $dir/$linklib" -+ fi -+ fi # $pass = dlpreopen -+ -+ if test -z "$libdir"; then -+ # Link the convenience library -+ if test "$linkmode" = lib; then -+ deplibs="$dir/$old_library $deplibs" -+ elif test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$dir/$old_library $compile_deplibs" -+ finalize_deplibs="$dir/$old_library $finalize_deplibs" -+ else -+ deplibs="$lib $deplibs" # used for prog,scan pass -+ fi -+ continue -+ fi -+ -+ -+ if test "$linkmode" = prog && test "$pass" != link; then -+ newlib_search_path="$newlib_search_path $ladir" -+ deplibs="$lib $deplibs" -+ -+ linkalldeplibs=no -+ if test "$link_all_deplibs" != no || test -z "$library_names" || -+ test "$build_libtool_libs" = no; then -+ linkalldeplibs=yes -+ fi -+ -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ case $deplib in -+ -L*) func_stripname '-L' '' "$deplib" -+ newlib_search_path="$newlib_search_path $func_stripname_result" -+ ;; -+ esac -+ # Need to link against all dependency_libs? -+ if test "$linkalldeplibs" = yes; then -+ deplibs="$deplib $deplibs" -+ else -+ # Need to hardcode shared library paths -+ # or/and link against static libraries -+ newdependency_libs="$deplib $newdependency_libs" -+ fi -+ if $opt_duplicate_deps ; then -+ case "$tmp_libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac -+ fi -+ tmp_libs="$tmp_libs $deplib" -+ done # for deplib -+ continue -+ fi # $linkmode = prog... -+ -+ if test "$linkmode,$pass" = "prog,link"; then -+ if test -n "$library_names" && -+ { { test "$prefer_static_libs" = no || -+ test "$prefer_static_libs,$installed" = "built,yes"; } || -+ test -z "$old_library"; }; then -+ # We need to hardcode the library path -+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then -+ # Make sure the rpath contains only unique directories. -+ case "$temp_rpath:" in -+ *"$absdir:"*) ;; -+ *) temp_rpath="$temp_rpath$absdir:" ;; -+ esac -+ fi -+ -+ # Hardcode the library path. -+ # Skip directories that are in the system default run-time -+ # search path. -+ case " $sys_lib_dlsearch_path " in -+ *" $absdir "*) ;; -+ *) -+ case "$compile_rpath " in -+ *" $absdir "*) ;; -+ *) compile_rpath="$compile_rpath $absdir" -+ esac -+ ;; -+ esac -+ case " $sys_lib_dlsearch_path " in -+ *" $libdir "*) ;; -+ *) -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_rpath="$finalize_rpath $libdir" -+ esac -+ ;; -+ esac -+ fi # $linkmode,$pass = prog,link... -+ -+ if test "$alldeplibs" = yes && -+ { test "$deplibs_check_method" = pass_all || -+ { test "$build_libtool_libs" = yes && -+ test -n "$library_names"; }; }; then -+ # We only need to search for static libraries -+ continue -+ fi -+ fi -+ -+ link_static=no # Whether the deplib will be linked statically -+ use_static_libs=$prefer_static_libs -+ if test "$use_static_libs" = built && test "$installed" = yes; then -+ use_static_libs=no -+ fi -+ if test -n "$library_names" && -+ { test "$use_static_libs" = no || test -z "$old_library"; }; then -+ case $host in -+ *cygwin* | *mingw* | *cegcc*) -+ # No point in relinking DLLs because paths are not encoded -+ notinst_deplibs="$notinst_deplibs $lib" -+ need_relink=no -+ ;; -+ *) -+ if test "$installed" = no; then -+ notinst_deplibs="$notinst_deplibs $lib" -+ need_relink=yes -+ fi -+ ;; -+ esac -+ # This is a shared library -+ -+ # Warn about portability, can't link against -module's on some -+ # systems (darwin). Don't bleat about dlopened modules though! -+ dlopenmodule="" -+ for dlpremoduletest in $dlprefiles; do -+ if test "X$dlpremoduletest" = "X$lib"; then -+ dlopenmodule="$dlpremoduletest" -+ break -+ fi -+ done -+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then -+ $ECHO -+ if test "$linkmode" = prog; then -+ $ECHO "*** Warning: Linking the executable $output against the loadable module" -+ else -+ $ECHO "*** Warning: Linking the shared library $output against the loadable module" -+ fi -+ $ECHO "*** $linklib is not portable!" -+ fi -+ if test "$linkmode" = lib && -+ test "$hardcode_into_libs" = yes; then -+ # Hardcode the library path. -+ # Skip directories that are in the system default run-time -+ # search path. -+ case " $sys_lib_dlsearch_path " in -+ *" $absdir "*) ;; -+ *) -+ case "$compile_rpath " in -+ *" $absdir "*) ;; -+ *) compile_rpath="$compile_rpath $absdir" -+ esac -+ ;; -+ esac -+ case " $sys_lib_dlsearch_path " in -+ *" $libdir "*) ;; -+ *) -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_rpath="$finalize_rpath $libdir" -+ esac -+ ;; -+ esac -+ fi -+ -+ if test -n "$old_archive_from_expsyms_cmds"; then -+ # figure out the soname -+ set dummy $library_names -+ shift -+ realname="$1" -+ shift -+ libname=`eval "\\$ECHO \"$libname_spec\""` -+ # use dlname if we got it. it's perfectly good, no? -+ if test -n "$dlname"; then -+ soname="$dlname" -+ elif test -n "$soname_spec"; then -+ # bleh windows -+ case $host in -+ *cygwin* | mingw* | *cegcc*) -+ func_arith $current - $age -+ major=$func_arith_result -+ versuffix="-$major" -+ ;; -+ esac -+ eval soname=\"$soname_spec\" -+ else -+ soname="$realname" -+ fi -+ -+ # Make a new name for the extract_expsyms_cmds to use -+ soroot="$soname" -+ func_basename "$soroot" -+ soname="$func_basename_result" -+ func_stripname 'lib' '.dll' "$soname" -+ newlib=libimp-$func_stripname_result.a -+ -+ # If the library has no export list, then create one now -+ if test -f "$output_objdir/$soname-def"; then : -+ else -+ func_verbose "extracting exported symbol list from \`$soname'" -+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?' -+ fi -+ -+ # Create $newlib -+ if test -f "$output_objdir/$newlib"; then :; else -+ func_verbose "generating import library for \`$soname'" -+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' -+ fi -+ # make sure the library variables are pointing to the new library -+ dir=$output_objdir -+ linklib=$newlib -+ fi # test -n "$old_archive_from_expsyms_cmds" -+ -+ if test "$linkmode" = prog || test "$mode" != relink; then -+ add_shlibpath= -+ add_dir= -+ add= -+ lib_linked=yes -+ case $hardcode_action in -+ immediate | unsupported) -+ if test "$hardcode_direct" = no; then -+ add="$dir/$linklib" -+ case $host in -+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; -+ *-*-sysv4*uw2*) add_dir="-L$dir" ;; -+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ -+ *-*-unixware7*) add_dir="-L$dir" ;; -+ *-*-darwin* ) -+ # if the lib is a (non-dlopened) module then we can not -+ # link against it, someone is ignoring the earlier warnings -+ if /usr/bin/file -L $add 2> /dev/null | -+ $GREP ": [^:]* bundle" >/dev/null ; then -+ if test "X$dlopenmodule" != "X$lib"; then -+ $ECHO "*** Warning: lib $linklib is a module, not a shared library" -+ if test -z "$old_library" ; then -+ $ECHO -+ $ECHO "*** And there doesn't seem to be a static archive available" -+ $ECHO "*** The link will probably fail, sorry" -+ else -+ add="$dir/$old_library" -+ fi -+ elif test -n "$old_library"; then -+ add="$dir/$old_library" -+ fi -+ fi -+ esac -+ elif test "$hardcode_minus_L" = no; then -+ case $host in -+ *-*-sunos*) add_shlibpath="$dir" ;; -+ esac -+ add_dir="-L$dir" -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = no; then -+ add_shlibpath="$dir" -+ add="-l$name" -+ else -+ lib_linked=no -+ fi -+ ;; -+ relink) -+ if test "$hardcode_direct" = yes && -+ test "$hardcode_direct_absolute" = no; then -+ add="$dir/$linklib" -+ elif test "$hardcode_minus_L" = yes; then -+ add_dir="-L$dir" -+ # Try looking first in the location we're being installed to. -+ if test -n "$inst_prefix_dir"; then -+ case $libdir in -+ [\\/]*) -+ add_dir="$add_dir -L$inst_prefix_dir$libdir" -+ ;; -+ esac -+ fi -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = yes; then -+ add_shlibpath="$dir" -+ add="-l$name" -+ else -+ lib_linked=no -+ fi -+ ;; -+ *) lib_linked=no ;; -+ esac -+ -+ if test "$lib_linked" != yes; then -+ func_fatal_configuration "unsupported hardcode properties" -+ fi -+ -+ if test -n "$add_shlibpath"; then -+ case :$compile_shlibpath: in -+ *":$add_shlibpath:"*) ;; -+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; -+ esac -+ fi -+ if test "$linkmode" = prog; then -+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" -+ test -n "$add" && compile_deplibs="$add $compile_deplibs" -+ else -+ test -n "$add_dir" && deplibs="$add_dir $deplibs" -+ test -n "$add" && deplibs="$add $deplibs" -+ if test "$hardcode_direct" != yes && -+ test "$hardcode_minus_L" != yes && -+ test "$hardcode_shlibpath_var" = yes; then -+ case :$finalize_shlibpath: in -+ *":$libdir:"*) ;; -+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -+ esac -+ fi -+ fi -+ fi -+ -+ if test "$linkmode" = prog || test "$mode" = relink; then -+ add_shlibpath= -+ add_dir= -+ add= -+ # Finalize command for both is simple: just hardcode it. -+ if test "$hardcode_direct" = yes && -+ test "$hardcode_direct_absolute" = no; then -+ add="$libdir/$linklib" -+ elif test "$hardcode_minus_L" = yes; then -+ add_dir="-L$libdir" -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = yes; then -+ case :$finalize_shlibpath: in -+ *":$libdir:"*) ;; -+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -+ esac -+ add="-l$name" -+ elif test "$hardcode_automatic" = yes; then -+ if test -n "$inst_prefix_dir" && -+ test -f "$inst_prefix_dir$libdir/$linklib" ; then -+ add="$inst_prefix_dir$libdir/$linklib" -+ else -+ add="$libdir/$linklib" -+ fi -+ else -+ # We cannot seem to hardcode it, guess we'll fake it. -+ add_dir="-L$libdir" -+ # Try looking first in the location we're being installed to. -+ if test -n "$inst_prefix_dir"; then -+ case $libdir in -+ [\\/]*) -+ add_dir="$add_dir -L$inst_prefix_dir$libdir" -+ ;; -+ esac -+ fi -+ add="-l$name" -+ fi -+ -+ if test "$linkmode" = prog; then -+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" -+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs" -+ else -+ test -n "$add_dir" && deplibs="$add_dir $deplibs" -+ test -n "$add" && deplibs="$add $deplibs" -+ fi -+ fi -+ elif test "$linkmode" = prog; then -+ # Here we assume that one of hardcode_direct or hardcode_minus_L -+ # is not unsupported. This is valid on all known static and -+ # shared platforms. -+ if test "$hardcode_direct" != unsupported; then -+ test -n "$old_library" && linklib="$old_library" -+ compile_deplibs="$dir/$linklib $compile_deplibs" -+ finalize_deplibs="$dir/$linklib $finalize_deplibs" -+ else -+ compile_deplibs="-l$name -L$dir $compile_deplibs" -+ finalize_deplibs="-l$name -L$dir $finalize_deplibs" -+ fi -+ elif test "$build_libtool_libs" = yes; then -+ # Not a shared library -+ if test "$deplibs_check_method" != pass_all; then -+ # We're trying link a shared library against a static one -+ # but the system doesn't support it. -+ -+ # Just print a warning and add the library to dependency_libs so -+ # that the program can be linked against the static library. -+ $ECHO -+ $ECHO "*** Warning: This system can not link to static lib archive $lib." -+ $ECHO "*** I have the capability to make that library automatically link in when" -+ $ECHO "*** you link to this library. But I can only do this if you have a" -+ $ECHO "*** shared version of the library, which you do not appear to have." -+ if test "$module" = yes; then -+ $ECHO "*** But as you try to build a module library, libtool will still create " -+ $ECHO "*** a static module, that should work as long as the dlopening application" -+ $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." -+ if test -z "$global_symbol_pipe"; then -+ $ECHO -+ $ECHO "*** However, this would only work if libtool was able to extract symbol" -+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" -+ $ECHO "*** not find such a program. So, this module is probably useless." -+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." -+ fi -+ if test "$build_old_libs" = no; then -+ build_libtool_libs=module -+ build_old_libs=yes -+ else -+ build_libtool_libs=no -+ fi -+ fi -+ else -+ deplibs="$dir/$old_library $deplibs" -+ link_static=yes -+ fi -+ fi # link shared/static library? -+ -+ if test "$linkmode" = lib; then -+ if test -n "$dependency_libs" && -+ { test "$hardcode_into_libs" != yes || -+ test "$build_old_libs" = yes || -+ test "$link_static" = yes; }; then -+ # Extract -R from dependency_libs -+ temp_deplibs= -+ for libdir in $dependency_libs; do -+ case $libdir in -+ -R*) func_stripname '-R' '' "$libdir" -+ temp_xrpath=$func_stripname_result -+ case " $xrpath " in -+ *" $temp_xrpath "*) ;; -+ *) xrpath="$xrpath $temp_xrpath";; -+ esac;; -+ *) temp_deplibs="$temp_deplibs $libdir";; -+ esac -+ done -+ dependency_libs="$temp_deplibs" -+ fi -+ -+ newlib_search_path="$newlib_search_path $absdir" -+ # Link against this library -+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" -+ # ... and its dependency_libs -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ newdependency_libs="$deplib $newdependency_libs" -+ if $opt_duplicate_deps ; then -+ case "$tmp_libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac -+ fi -+ tmp_libs="$tmp_libs $deplib" -+ done -+ -+ if test "$link_all_deplibs" != no; then -+ # Add the search paths of all dependency libraries -+ for deplib in $dependency_libs; do -+ path= -+ case $deplib in -+ -L*) path="$deplib" ;; -+ *.la) -+ func_dirname "$deplib" "" "." -+ dir="$func_dirname_result" -+ # We need an absolute path. -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; -+ *) -+ absdir=`cd "$dir" && pwd` -+ if test -z "$absdir"; then -+ func_warning "cannot determine absolute directory name of \`$dir'" -+ absdir="$dir" -+ fi -+ ;; -+ esac -+ if $GREP "^installed=no" $deplib > /dev/null; then -+ case $host in -+ *-*-darwin*) -+ depdepl= -+ eval deplibrary_names=`${SED} -n -e 's/^library_names=$.*$$/\1/p' $deplib` -+ if test -n "$deplibrary_names" ; then -+ for tmp in $deplibrary_names ; do -+ depdepl=$tmp -+ done -+ if test -f "$absdir/$objdir/$depdepl" ; then -+ depdepl="$absdir/$objdir/$depdepl" -+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` -+ if test -z "$darwin_install_name"; then -+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` -+ fi -+ compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" -+ linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" -+ path= -+ fi -+ fi -+ ;; -+ *) -+ path="-L$absdir/$objdir" -+ ;; -+ esac -+ else -+ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` -+ test -z "$libdir" && \ -+ func_fatal_error "\`$deplib' is not a valid libtool archive" -+ test "$absdir" != "$libdir" && \ -+ func_warning "\`$deplib' seems to be moved" -+ -+ path="-L$absdir" -+ fi -+ ;; -+ esac -+ case " $deplibs " in -+ *" $path "*) ;; -+ *) deplibs="$path $deplibs" ;; -+ esac -+ done -+ fi # link_all_deplibs != no -+ fi # linkmode = lib -+ done # for deplib in $libs -+ if test "$pass" = link; then -+ if test "$linkmode" = "prog"; then -+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs" -+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" -+ else -+ compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` -+ fi -+ fi -+ dependency_libs="$newdependency_libs" -+ if test "$pass" = dlpreopen; then -+ # Link the dlpreopened libraries before other libraries -+ for deplib in $save_deplibs; do -+ deplibs="$deplib $deplibs" -+ done -+ fi -+ if test "$pass" != dlopen; then -+ if test "$pass" != conv; then -+ # Make sure lib_search_path contains only unique directories. -+ lib_search_path= -+ for dir in $newlib_search_path; do -+ case "$lib_search_path " in -+ *" $dir "*) ;; -+ *) lib_search_path="$lib_search_path $dir" ;; -+ esac -+ done -+ newlib_search_path= -+ fi -+ -+ if test "$linkmode,$pass" != "prog,link"; then -+ vars="deplibs" -+ else -+ vars="compile_deplibs finalize_deplibs" -+ fi -+ for var in $vars dependency_libs; do -+ # Add libraries to $var in reverse order -+ eval tmp_libs=\"\$$var\" -+ new_libs= -+ for deplib in $tmp_libs; do -+ # FIXME: Pedantically, this is the right thing to do, so -+ # that some nasty dependency loop isn't accidentally -+ # broken: -+ #new_libs="$deplib $new_libs" -+ # Pragmatically, this seems to cause very few problems in -+ # practice: -+ case $deplib in -+ -L*) new_libs="$deplib $new_libs" ;; -+ -R*) ;; -+ *) -+ # And here is the reason: when a library appears more -+ # than once as an explicit dependence of a library, or -+ # is implicitly linked in more than once by the -+ # compiler, it is considered special, and multiple -+ # occurrences thereof are not removed. Compare this -+ # with having the same library being listed as a -+ # dependency of multiple other libraries: in this case, -+ # we know (pedantically, we assume) the library does not -+ # need to be listed more than once, so we keep only the -+ # last copy. This is not always right, but it is rare -+ # enough that we require users that really mean to play -+ # such unportable linking tricks to link the library -+ # using -Wl,-lname, so that libtool does not consider it -+ # for duplicate removal. -+ case " $specialdeplibs " in -+ *" $deplib "*) new_libs="$deplib $new_libs" ;; -+ *) -+ case " $new_libs " in -+ *" $deplib "*) ;; -+ *) new_libs="$deplib $new_libs" ;; -+ esac -+ ;; -+ esac -+ ;; -+ esac -+ done -+ tmp_libs= -+ for deplib in $new_libs; do -+ case $deplib in -+ -L*) -+ case " $tmp_libs " in -+ *" $deplib "*) ;; -+ *) tmp_libs="$tmp_libs $deplib" ;; -+ esac -+ ;; -+ *) tmp_libs="$tmp_libs $deplib" ;; -+ esac -+ done -+ eval $var=\"$tmp_libs\" -+ done # for var -+ fi -+ # Last step: remove runtime libs from dependency_libs -+ # (they stay in deplibs) -+ tmp_libs= -+ for i in $dependency_libs ; do -+ case " $predeps $postdeps $compiler_lib_search_path " in -+ *" $i "*) -+ i="" -+ ;; -+ esac -+ if test -n "$i" ; then -+ tmp_libs="$tmp_libs $i" -+ fi -+ done -+ dependency_libs=$tmp_libs -+ done # for pass -+ if test "$linkmode" = prog; then -+ dlfiles="$newdlfiles" -+ fi -+ if test "$linkmode" = prog || test "$linkmode" = lib; then -+ dlprefiles="$newdlprefiles" -+ fi -+ -+ case $linkmode in -+ oldlib) -+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -+ func_warning "\`-dlopen' is ignored for archives" -+ fi -+ -+ case " $deplibs" in -+ *\ -l* | *\ -L*) -+ func_warning "\`-l' and \`-L' are ignored for archives" ;; -+ esac -+ -+ test -n "$rpath" && \ -+ func_warning "\`-rpath' is ignored for archives" -+ -+ test -n "$xrpath" && \ -+ func_warning "\`-R' is ignored for archives" -+ -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info/-version-number' is ignored for archives" -+ -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for archives" -+ -+ test -n "$export_symbols$export_symbols_regex" && \ -+ func_warning "\`-export-symbols' is ignored for archives" -+ -+ # Now set the variables for building old libraries. -+ build_libtool_libs=no -+ oldlibs="$output" -+ objs="$objs$old_deplibs" -+ ;; -+ -+ lib) -+ # Make sure we only generate libraries of the form `libNAME.la'. -+ case $outputname in -+ lib*) -+ func_stripname 'lib' '.la' "$outputname" -+ name=$func_stripname_result -+ eval shared_ext=\"$shrext_cmds\" -+ eval libname=\"$libname_spec\" -+ ;; -+ *) -+ test "$module" = no && \ -+ func_fatal_help "libtool library \`$output' must begin with \`lib'" -+ -+ if test "$need_lib_prefix" != no; then -+ # Add the "lib" prefix for modules if required -+ func_stripname '' '.la' "$outputname" -+ name=$func_stripname_result -+ eval shared_ext=\"$shrext_cmds\" -+ eval libname=\"$libname_spec\" -+ else -+ func_stripname '' '.la' "$outputname" -+ libname=$func_stripname_result -+ fi -+ ;; -+ esac -+ -+ if test -n "$objs"; then -+ if test "$deplibs_check_method" != pass_all; then -+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" -+ else -+ $ECHO -+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool" -+ $ECHO "*** objects $objs is not portable!" -+ libobjs="$libobjs $objs" -+ fi -+ fi -+ -+ test "$dlself" != no && \ -+ func_warning "\`-dlopen self' is ignored for libtool libraries" -+ -+ set dummy $rpath -+ shift -+ test "$#" -gt 1 && \ -+ func_warning "ignoring multiple \`-rpath's for a libtool library" -+ -+ install_libdir="$1" -+ -+ oldlibs= -+ if test -z "$rpath"; then -+ if test "$build_libtool_libs" = yes; then -+ # Building a libtool convenience library. -+ # Some compilers have problems with a `.al' extension so -+ # convenience libraries should have the same extension an -+ # archive normally would. -+ oldlibs="$output_objdir/$libname.$libext $oldlibs" -+ build_libtool_libs=convenience -+ build_old_libs=yes -+ fi -+ -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" -+ -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for convenience libraries" -+ else -+ -+ # Parse the version information argument. -+ save_ifs="$IFS"; IFS=':' -+ set dummy $vinfo 0 0 0 -+ shift -+ IFS="$save_ifs" -+ -+ test -n "$7" && \ -+ func_fatal_help "too many parameters to \`-version-info'" -+ -+ # convert absolute version numbers to libtool ages -+ # this retains compatibility with .la files and attempts -+ # to make the code below a bit more comprehensible -+ -+ case $vinfo_number in -+ yes) -+ number_major="$1" -+ number_minor="$2" -+ number_revision="$3" -+ # -+ # There are really only two kinds -- those that -+ # use the current revision as the major version -+ # and those that subtract age and use age as -+ # a minor version. But, then there is irix -+ # which has an extra 1 added just for fun -+ # -+ case $version_type in -+ darwin|linux|osf|windows|none) -+ func_arith $number_major + $number_minor -+ current=$func_arith_result -+ age="$number_minor" -+ revision="$number_revision" -+ ;; -+ freebsd-aout|freebsd-elf|sunos) -+ current="$number_major" -+ revision="$number_minor" -+ age="0" -+ ;; -+ irix|nonstopux) -+ func_arith $number_major + $number_minor -+ current=$func_arith_result -+ age="$number_minor" -+ revision="$number_minor" -+ lt_irix_increment=no -+ ;; -+ *) -+ func_fatal_configuration "$modename: unknown library version type \`$version_type'" -+ ;; -+ esac -+ ;; -+ no) -+ current="$1" -+ revision="$2" -+ age="$3" -+ ;; -+ esac -+ -+ # Check that each of the things are valid numbers. -+ case $current in -+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; -+ *) -+ func_error "CURRENT \`$current' must be a nonnegative integer" -+ func_fatal_error "\`$vinfo' is not valid version information" -+ ;; -+ esac -+ -+ case $revision in -+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; -+ *) -+ func_error "REVISION \`$revision' must be a nonnegative integer" -+ func_fatal_error "\`$vinfo' is not valid version information" -+ ;; -+ esac -+ -+ case $age in -+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; -+ *) -+ func_error "AGE \`$age' must be a nonnegative integer" -+ func_fatal_error "\`$vinfo' is not valid version information" -+ ;; -+ esac -+ -+ if test "$age" -gt "$current"; then -+ func_error "AGE \`$age' is greater than the current interface number \`$current'" -+ func_fatal_error "\`$vinfo' is not valid version information" -+ fi -+ -+ # Calculate the version variables. -+ major= -+ versuffix= -+ verstring= -+ case $version_type in -+ none) ;; -+ -+ darwin) -+ # Like Linux, but with the current version available in -+ # verstring for coding it into the library header -+ func_arith $current - $age -+ major=.$func_arith_result -+ versuffix="$major.$age.$revision" -+ # Darwin ld doesn't like 0 for these options... -+ func_arith $current + 1 -+ minor_current=$func_arith_result -+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" -+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" -+ ;; -+ -+ freebsd-aout) -+ major=".$current" -+ versuffix=".$current.$revision"; -+ ;; -+ -+ freebsd-elf) -+ major=".$current" -+ versuffix=".$current" -+ ;; -+ -+ irix | nonstopux) -+ if test "X$lt_irix_increment" = "Xno"; then -+ func_arith $current - $age -+ else -+ func_arith $current - $age + 1 -+ fi -+ major=$func_arith_result -+ -+ case $version_type in -+ nonstopux) verstring_prefix=nonstopux ;; -+ *) verstring_prefix=sgi ;; -+ esac -+ verstring="$verstring_prefix$major.$revision" -+ -+ # Add in all the interfaces that we are compatible with. -+ loop=$revision -+ while test "$loop" -ne 0; do -+ func_arith $revision - $loop -+ iface=$func_arith_result -+ func_arith $loop - 1 -+ loop=$func_arith_result -+ verstring="$verstring_prefix$major.$iface:$verstring" -+ done -+ -+ # Before this point, $major must not contain `.'. -+ major=.$major -+ versuffix="$major.$revision" -+ ;; -+ -+ linux) -+ func_arith $current - $age -+ major=.$func_arith_result -+ versuffix="$major.$age.$revision" -+ ;; -+ -+ osf) -+ func_arith $current - $age -+ major=.$func_arith_result -+ versuffix=".$current.$age.$revision" -+ verstring="$current.$age.$revision" -+ -+ # Add in all the interfaces that we are compatible with. -+ loop=$age -+ while test "$loop" -ne 0; do -+ func_arith $current - $loop -+ iface=$func_arith_result -+ func_arith $loop - 1 -+ loop=$func_arith_result -+ verstring="$verstring:${iface}.0" -+ done -+ -+ # Make executables depend on our current version. -+ verstring="$verstring:${current}.0" -+ ;; -+ -+ qnx) -+ major=".$current" -+ versuffix=".$current" -+ ;; -+ -+ sunos) -+ major=".$current" -+ versuffix=".$current.$revision" -+ ;; -+ -+ windows) -+ # Use '-' rather than '.', since we only want one -+ # extension on DOS 8.3 filesystems. -+ func_arith $current - $age -+ major=$func_arith_result -+ versuffix="-$major" -+ ;; -+ -+ *) -+ func_fatal_configuration "unknown library version type \`$version_type'" -+ ;; -+ esac -+ -+ # Clear the version info if we defaulted, and they specified a release. -+ if test -z "$vinfo" && test -n "$release"; then -+ major= -+ case $version_type in -+ darwin) -+ # we can't check for "0.0" in archive_cmds due to quoting -+ # problems, so we reset it completely -+ verstring= -+ ;; -+ *) -+ verstring="0.0" -+ ;; -+ esac -+ if test "$need_version" = no; then -+ versuffix= -+ else -+ versuffix=".0.0" -+ fi -+ fi -+ -+ # Remove version info from name if versioning should be avoided -+ if test "$avoid_version" = yes && test "$need_version" = no; then -+ major= -+ versuffix= -+ verstring="" -+ fi -+ -+ # Check to see if the archive will have undefined symbols. -+ if test "$allow_undefined" = yes; then -+ if test "$allow_undefined_flag" = unsupported; then -+ func_warning "undefined symbols not allowed in $host shared libraries" -+ build_libtool_libs=no -+ build_old_libs=yes -+ fi -+ else -+ # Don't allow undefined symbols. -+ allow_undefined_flag="$no_undefined_flag" -+ fi -+ -+ fi -+ -+ func_generate_dlsyms "$libname" "$libname" "yes" -+ libobjs="$libobjs $symfileobj" -+ test "X$libobjs" = "X " && libobjs= -+ -+ if test "$mode" != relink; then -+ # Remove our outputs, but don't remove object files since they -+ # may have been created when compiling PIC objects. -+ removelist= -+ tempremovelist=`$ECHO "$output_objdir/*"` -+ for p in $tempremovelist; do -+ case $p in -+ *.$objext | *.gcno) -+ ;; -+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) -+ if test "X$precious_files_regex" != "X"; then -+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 -+ then -+ continue -+ fi -+ fi -+ removelist="$removelist $p" -+ ;; -+ *) ;; -+ esac -+ done -+ test -n "$removelist" && \ -+ func_show_eval "${RM}r \$removelist" -+ fi -+ -+ # Now set the variables for building old libraries. -+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then -+ oldlibs="$oldlibs $output_objdir/$libname.$libext" -+ -+ # Transform .lo files to .o files. -+ oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` -+ fi -+ -+ # Eliminate all temporary directories. -+ #for path in $notinst_path; do -+ # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` -+ # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` -+ # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` -+ #done -+ -+ if test -n "$xrpath"; then -+ # If the user specified any rpath flags, then add them. -+ temp_xrpath= -+ for libdir in $xrpath; do -+ temp_xrpath="$temp_xrpath -R$libdir" -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_rpath="$finalize_rpath $libdir" ;; -+ esac -+ done -+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then -+ dependency_libs="$temp_xrpath $dependency_libs" -+ fi -+ fi -+ -+ # Make sure dlfiles contains only unique files that won't be dlpreopened -+ old_dlfiles="$dlfiles" -+ dlfiles= -+ for lib in $old_dlfiles; do -+ case " $dlprefiles $dlfiles " in -+ *" $lib "*) ;; -+ *) dlfiles="$dlfiles $lib" ;; -+ esac -+ done -+ -+ # Make sure dlprefiles contains only unique files -+ old_dlprefiles="$dlprefiles" -+ dlprefiles= -+ for lib in $old_dlprefiles; do -+ case "$dlprefiles " in -+ *" $lib "*) ;; -+ *) dlprefiles="$dlprefiles $lib" ;; -+ esac -+ done -+ -+ if test "$build_libtool_libs" = yes; then -+ if test -n "$rpath"; then -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) -+ # these systems don't actually have a c library (as such)! -+ ;; -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # Rhapsody C library is in the System framework -+ deplibs="$deplibs System.ltframework" -+ ;; -+ *-*-netbsd*) -+ # Don't link with libc until the a.out ld.so is fixed. -+ ;; -+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) -+ # Do not include libc due to us having libc/libc_r. -+ ;; -+ *-*-sco3.2v5* | *-*-sco5v6*) -+ # Causes problems with __ctype -+ ;; -+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) -+ # Compiler inserts libc in the correct place for threads to work -+ ;; -+ *) -+ # Add libc to deplibs on all other systems if necessary. -+ if test "$build_libtool_need_lc" = "yes"; then -+ deplibs="$deplibs -lc" -+ fi -+ ;; -+ esac -+ fi -+ -+ # Transform deplibs into only deplibs that can be linked in shared. -+ name_save=$name -+ libname_save=$libname -+ release_save=$release -+ versuffix_save=$versuffix -+ major_save=$major -+ # I'm not sure if I'm treating the release correctly. I think -+ # release should show up in the -l (ie -lgmp5) so we don't want to -+ # add it in twice. Is that correct? -+ release="" -+ versuffix="" -+ major="" -+ newdeplibs= -+ droppeddeps=no -+ case $deplibs_check_method in -+ pass_all) -+ # Don't check for shared/static. Everything works. -+ # This might be a little naive. We might want to check -+ # whether the library exists or not. But this is on -+ # osf3 & osf4 and I'm not really sure... Just -+ # implementing what was already the behavior. -+ newdeplibs=$deplibs -+ ;; -+ test_compile) -+ # This code stresses the "libraries are programs" paradigm to its -+ # limits. Maybe even breaks it. We compile a program, linking it -+ # against the deplibs as a proxy for the library. Then we can check -+ # whether they linked in statically or dynamically with ldd. -+ $opt_dry_run || $RM conftest.c -+ cat > conftest.c </dev/null` -+ for potent_lib in $potential_libs; do -+ # Follow soft links. -+ if ls -lLd "$potent_lib" 2>/dev/null | -+ $GREP " -> " >/dev/null; then -+ continue -+ fi -+ # The statement above tries to avoid entering an -+ # endless loop below, in case of cyclic links. -+ # We might still enter an endless loop, since a link -+ # loop can be closed while we follow links, -+ # but so what? -+ potlib="$potent_lib" -+ while test -h "$potlib" 2>/dev/null; do -+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` -+ case $potliblink in -+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; -+ *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; -+ esac -+ done -+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | -+ $SED -e 10q | -+ $EGREP "$file_magic_regex" > /dev/null; then -+ newdeplibs="$newdeplibs $a_deplib" -+ a_deplib="" -+ break 2 -+ fi -+ done -+ done -+ fi -+ if test -n "$a_deplib" ; then -+ droppeddeps=yes -+ $ECHO -+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." -+ $ECHO "*** I have the capability to make that library automatically link in when" -+ $ECHO "*** you link to this library. But I can only do this if you have a" -+ $ECHO "*** shared version of the library, which you do not appear to have" -+ $ECHO "*** because I did check the linker path looking for a file starting" -+ if test -z "$potlib" ; then -+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)" -+ else -+ $ECHO "*** with $libname and none of the candidates passed a file format test" -+ $ECHO "*** using a file magic. Last file checked: $potlib" -+ fi -+ fi -+ ;; -+ *) -+ # Add a -L argument. -+ newdeplibs="$newdeplibs $a_deplib" -+ ;; -+ esac -+ done # Gone through all deplibs. -+ ;; -+ match_pattern*) -+ set dummy $deplibs_check_method; shift -+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 $.*$"` -+ for a_deplib in $deplibs; do -+ case $a_deplib in -+ -l*) -+ func_stripname -l '' "$a_deplib" -+ name=$func_stripname_result -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ case " $predeps $postdeps " in -+ *" $a_deplib "*) -+ newdeplibs="$newdeplibs $a_deplib" -+ a_deplib="" -+ ;; -+ esac -+ fi -+ if test -n "$a_deplib" ; then -+ libname=`eval "\\$ECHO \"$libname_spec\""` -+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` -+ for potent_lib in $potential_libs; do -+ potlib="$potent_lib" # see symlink-check above in file_magic test -+ if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ -+ $EGREP "$match_pattern_regex" > /dev/null; then -+ newdeplibs="$newdeplibs $a_deplib" -+ a_deplib="" -+ break 2 -+ fi -+ done -+ done -+ fi -+ if test -n "$a_deplib" ; then -+ droppeddeps=yes -+ $ECHO -+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." -+ $ECHO "*** I have the capability to make that library automatically link in when" -+ $ECHO "*** you link to this library. But I can only do this if you have a" -+ $ECHO "*** shared version of the library, which you do not appear to have" -+ $ECHO "*** because I did check the linker path looking for a file starting" -+ if test -z "$potlib" ; then -+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" -+ else -+ $ECHO "*** with $libname and none of the candidates passed a file format test" -+ $ECHO "*** using a regex pattern. Last file checked: $potlib" -+ fi -+ fi -+ ;; -+ *) -+ # Add a -L argument. -+ newdeplibs="$newdeplibs $a_deplib" -+ ;; -+ esac -+ done # Gone through all deplibs. -+ ;; -+ none | unknown | *) -+ newdeplibs="" -+ tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ -+ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ for i in $predeps $postdeps ; do -+ # can't use Xsed below, because $i might contain '/' -+ tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` -+ done -+ fi -+ if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | -+ $GREP . >/dev/null; then -+ $ECHO -+ if test "X$deplibs_check_method" = "Xnone"; then -+ $ECHO "*** Warning: inter-library dependencies are not supported in this platform." -+ else -+ $ECHO "*** Warning: inter-library dependencies are not known to be supported." -+ fi -+ $ECHO "*** All declared inter-library dependencies are being dropped." -+ droppeddeps=yes -+ fi -+ ;; -+ esac -+ versuffix=$versuffix_save -+ major=$major_save -+ release=$release_save -+ libname=$libname_save -+ name=$name_save -+ -+ case $host in -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # On Rhapsody replace the C library with the System framework -+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - ;; - esac -- $rm $output -- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 - -- $echo > $output "\ --#! $SHELL -- --# $output - temporary wrapper script for $objdir/$outputname --# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP --# --# The $output program cannot be directly executed until all the libtool --# libraries that it depends on are installed. --# --# This wrapper script should never be moved out of the build directory. --# If it is, it will not operate correctly. -- --# Sed substitution that helps us do robust quoting. It backslashifies --# metacharacters that are still active within double-quoted strings. --Xsed='${SED} -e 1s/^X//' --sed_quote_subst='$sed_quote_subst' -- --# The HP-UX ksh and POSIX shell print the target directory to stdout --# if CDPATH is set. --if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi -- --relink_command=\"$relink_command\" -- --# This environment variable determines our operation mode. --if test \"\$libtool_install_magic\" = \"$magic\"; then -- # install mode needs the following variable: -- notinst_deplibs='$notinst_deplibs' --else -- # When we are sourced in execute mode, \$file and \$echo are already set. -- if test \"\$libtool_execute_magic\" != \"$magic\"; then -- echo=\"$qecho\" -- file=\"\$0\" -- # Make sure echo works. -- if test \"X\$1\" = X--no-reexec; then -- # Discard the --no-reexec flag, and continue. -- shift -- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then -- # Yippee, \$echo works! -- : -- else -- # Restart under the correct shell, and then maybe \$echo will work. -- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} -- fi -- fi\ --" -- $echo >> $output "\ -- -- # Find the directory that this script lives in. -- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` -- test \"x\$thisdir\" = \"x\$file\" && thisdir=. -- -- # Follow symbolic links until we get to the real thisdir. -- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` -- while test -n \"\$file\"; do -- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` -+ if test "$droppeddeps" = yes; then -+ if test "$module" = yes; then -+ $ECHO -+ $ECHO "*** Warning: libtool could not satisfy all declared inter-library" -+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create" -+ $ECHO "*** a static module, that should work as long as the dlopening" -+ $ECHO "*** application is linked with the -dlopen flag." -+ if test -z "$global_symbol_pipe"; then -+ $ECHO -+ $ECHO "*** However, this would only work if libtool was able to extract symbol" -+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" -+ $ECHO "*** not find such a program. So, this module is probably useless." -+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." -+ fi -+ if test "$build_old_libs" = no; then -+ oldlibs="$output_objdir/$libname.$libext" -+ build_libtool_libs=module -+ build_old_libs=yes -+ else -+ build_libtool_libs=no -+ fi -+ else -+ $ECHO "*** The inter-library dependencies that have been dropped here will be" -+ $ECHO "*** automatically added whenever a program is linked with this library" -+ $ECHO "*** or is declared to -dlopen it." - -- # If there was a directory component, then change thisdir. -- if test \"x\$destdir\" != \"x\$file\"; then -- case \"\$destdir\" in -- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; -- *) thisdir=\"\$thisdir/\$destdir\" ;; -+ if test "$allow_undefined" = no; then -+ $ECHO -+ $ECHO "*** Since this library must not contain undefined symbols," -+ $ECHO "*** because either the platform does not support them or" -+ $ECHO "*** it was explicitly requested with -no-undefined," -+ $ECHO "*** libtool will only create a static version of it." -+ if test "$build_old_libs" = no; then -+ oldlibs="$output_objdir/$libname.$libext" -+ build_libtool_libs=module -+ build_old_libs=yes -+ else -+ build_libtool_libs=no -+ fi -+ fi -+ fi -+ fi -+ # Done checking deplibs! -+ deplibs=$newdeplibs -+ fi -+ # Time to change all our "foo.ltframework" stuff back to "-framework foo" -+ case $host in -+ *-*-darwin*) -+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` -+ new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` -+ deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` -+ ;; - esac -- fi -- -- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` -- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` -- done - -- # Try to get the absolute directory name. -- absdir=\`cd \"\$thisdir\" && pwd\` -- test -n \"\$absdir\" && thisdir=\"\$absdir\" --" -- -- if test "$fast_install" = yes; then -- $echo >> $output "\ -- program=lt-'$outputname'$exeext -- progdir=\"\$thisdir/$objdir\" -- -- if test ! -f \"\$progdir/\$program\" || \\ -- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ -- test \"X\$file\" != \"X\$progdir/\$program\"; }; then -+ # move library search paths that coincide with paths to not yet -+ # installed libraries to the beginning of the library search list -+ new_libs= -+ for path in $notinst_path; do -+ case " $new_libs " in -+ *" -L$path/$objdir "*) ;; -+ *) -+ case " $deplibs " in -+ *" -L$path/$objdir "*) -+ new_libs="$new_libs -L$path/$objdir" ;; -+ esac -+ ;; -+ esac -+ done -+ for deplib in $deplibs; do -+ case $deplib in -+ -L*) -+ case " $new_libs " in -+ *" $deplib "*) ;; -+ *) new_libs="$new_libs $deplib" ;; -+ esac -+ ;; -+ *) new_libs="$new_libs $deplib" ;; -+ esac -+ done -+ deplibs="$new_libs" - -- file=\"\$\$-\$program\" -+ # All the library-specific variables (install_libdir is set above). -+ library_names= -+ old_library= -+ dlname= - -- if test ! -d \"\$progdir\"; then -- $mkdir \"\$progdir\" -- else -- $rm \"\$progdir/\$file\" -- fi" -+ # Test again, we may have decided not to build it any more -+ if test "$build_libtool_libs" = yes; then -+ if test "$hardcode_into_libs" = yes; then -+ # Hardcode the library paths -+ hardcode_libdirs= -+ dep_rpath= -+ rpath="$finalize_rpath" -+ test "$mode" != relink && rpath="$compile_rpath$rpath" -+ for libdir in $rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ ;; -+ esac -+ fi -+ else -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ dep_rpath="$dep_rpath $flag" -+ fi -+ elif test -n "$runpath_var"; then -+ case "$perm_rpath " in -+ *" $libdir "*) ;; -+ *) perm_rpath="$perm_rpath $libdir" ;; -+ esac -+ fi -+ done -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ if test -n "$hardcode_libdir_flag_spec_ld"; then -+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" -+ else -+ eval dep_rpath=\"$hardcode_libdir_flag_spec\" -+ fi -+ fi -+ if test -n "$runpath_var" && test -n "$perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $perm_rpath; do -+ rpath="$rpath$dir:" -+ done -+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" -+ fi -+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" -+ fi - -- $echo >> $output "\ -+ shlibpath="$finalize_shlibpath" -+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" -+ if test -n "$shlibpath"; then -+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" -+ fi - -- # relink executable if necessary -- if test -n \"\$relink_command\"; then -- if relink_command_output=\`eval \$relink_command 2>&1\`; then : -- else -- $echo \"\$relink_command_output\" >&2 -- $rm \"\$progdir/\$file\" -- exit $EXIT_FAILURE -- fi -- fi -+ # Get the real and link names of the library. -+ eval shared_ext=\"$shrext_cmds\" -+ eval library_names=\"$library_names_spec\" -+ set dummy $library_names -+ shift -+ realname="$1" -+ shift - -- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || -- { $rm \"\$progdir/\$program\"; -- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } -- $rm \"\$progdir/\$file\" -- fi" -+ if test -n "$soname_spec"; then -+ eval soname=\"$soname_spec\" - else -- $echo >> $output "\ -- program='$outputname' -- progdir=\"\$thisdir/$objdir\" --" -+ soname="$realname" - fi -- -- $echo >> $output "\ -- -- if test -f \"\$progdir/\$program\"; then" -- -- # Export our shlibpath_var if we have one. -- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then -- $echo >> $output "\ -- # Add our own library path to $shlibpath_var -- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" -- -- # Some systems cannot cope with colon-terminated $shlibpath_var -- # The second colon is a workaround for a bug in BeOS R4 sed -- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` -- -- export $shlibpath_var --" -+ if test -z "$dlname"; then -+ dlname=$soname - fi - -- # fixup the dll searchpath if we need to. -- if test -n "$dllsearchpath"; then -- $echo >> $output "\ -- # Add the dll search path components to the executable PATH -- PATH=$dllsearchpath:\$PATH --" -- fi -+ lib="$output_objdir/$realname" -+ linknames= -+ for link -+ do -+ linknames="$linknames $link" -+ done - -- $echo >> $output "\ -- if test \"\$libtool_execute_magic\" != \"$magic\"; then -- # Run the actual program with our arguments. --" -- case $host in -- # Backslashes separate directories on plain windows -- *-*-mingw | *-*-os2*) -- $echo >> $output "\ -- exec \$progdir\\\\\$program \${1+\"\$@\"} --" -- ;; -+ # Use standard objects if they are pic -+ test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ test "X$libobjs" = "X " && libobjs= - -- *) -- $echo >> $output "\ -- exec \$progdir/\$program \${1+\"\$@\"} --" -+ delfiles= -+ if test -n "$export_symbols" && test -n "$include_expsyms"; then -+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" -+ export_symbols="$output_objdir/$libname.uexp" -+ delfiles="$delfiles $export_symbols" -+ fi -+ -+ orig_export_symbols= -+ case $host_os in -+ cygwin* | mingw* | cegcc*) -+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then -+ # exporting using user supplied symfile -+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then -+ # and it's NOT already a .def file. Must figure out -+ # which of the given symbols are data symbols and tag -+ # them as such. So, trigger use of export_symbols_cmds. -+ # export_symbols gets reassigned inside the "prepare -+ # the list of exported symbols" if statement, so the -+ # include_expsyms logic still works. -+ orig_export_symbols="$export_symbols" -+ export_symbols= -+ always_export_symbols=yes -+ fi -+ fi - ;; - esac -- $echo >> $output "\ -- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" -- exit $EXIT_FAILURE -- fi -- else -- # The program doesn't exist. -- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 -- \$echo \"This script is just a wrapper for \$program.\" 1>&2 -- $echo \"See the $PACKAGE documentation for more information.\" 1>&2 -- exit $EXIT_FAILURE -- fi --fi\ --" -- chmod +x $output -- fi -- exit $EXIT_SUCCESS -- ;; -- esac -- -- # See if we need to build an old-fashioned archive. -- for oldlib in $oldlibs; do - -- if test "$build_libtool_libs" = convenience; then -- oldobjs="$libobjs_save" -- addlibs="$convenience" -- build_libtool_libs=no -- else -- if test "$build_libtool_libs" = module; then -- oldobjs="$libobjs_save" -- build_libtool_libs=no -- else -- oldobjs="$old_deplibs $non_pic_objects" -+ # Prepare the list of exported symbols -+ if test -z "$export_symbols"; then -+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then -+ func_verbose "generating symbol list for \`$libname.la'" -+ export_symbols="$output_objdir/$libname.exp" -+ $opt_dry_run || $RM $export_symbols -+ cmds=$export_symbols_cmds -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ eval cmd=\"$cmd\" -+ func_len " $cmd" -+ len=$func_len_result -+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then -+ func_show_eval "$cmd" 'exit $?' -+ skipped_export=false -+ else -+ # The command line is too long to execute in one step. -+ func_verbose "using reloadable object file for export list..." -+ skipped_export=: -+ # Break out early, otherwise skipped_export may be -+ # set to false by a later but shorter cmd. -+ break -+ fi -+ done -+ IFS="$save_ifs" -+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then -+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' -+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' -+ fi -+ fi - fi -- addlibs="$old_convenience" -- fi - -- if test -n "$addlibs"; then -- gentop="$output_objdir/${outputname}x" -- $show "${rm}r $gentop" -- $run ${rm}r "$gentop" -- $show "$mkdir $gentop" -- $run $mkdir "$gentop" -- status=$? -- if test "$status" -ne 0 && test ! -d "$gentop"; then -- exit $status -+ if test -n "$export_symbols" && test -n "$include_expsyms"; then -+ tmp_export_symbols="$export_symbols" -+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" -+ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' -+ fi -+ -+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then -+ # The given exports_symbols file has to be filtered, so filter it. -+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" -+ # FIXME: $output_objdir/$libname.filter potentially contains lots of -+ # 's' commands which not all seds can handle. GNU sed should be fine -+ # though. Also, the filter scales superlinearly with the number of -+ # global variables. join(1) would be nice here, but unfortunately -+ # isn't a blessed tool. -+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,$.*$$[ \,].*$,s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter -+ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" -+ export_symbols=$output_objdir/$libname.def -+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi -- generated="$generated $gentop" - -- # Add in members from convenience archives. -- for xlib in $addlibs; do -- # Extract the objects. -- case $xlib in -- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; -- *) xabs=`pwd`"/$xlib" ;; -+ tmp_deplibs= -+ for test_deplib in $deplibs; do -+ case " $convenience " in -+ *" $test_deplib "*) ;; -+ *) -+ tmp_deplibs="$tmp_deplibs $test_deplib" -+ ;; - esac -- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` -- xdir="$gentop/$xlib" -+ done -+ deplibs="$tmp_deplibs" - -- $show "${rm}r $xdir" -- $run ${rm}r "$xdir" -- $show "$mkdir $xdir" -- $run $mkdir "$xdir" -- status=$? -- if test "$status" -ne 0 && test ! -d "$xdir"; then -- exit $status -- fi -- # We will extract separately just the conflicting names and we will no -- # longer touch any unique names. It is faster to leave these extract -- # automatically by $AR in one run. -- $show "(cd $xdir && $AR x $xabs)" -- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? -- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then -- : -+ if test -n "$convenience"; then -+ if test -n "$whole_archive_flag_spec" && -+ test "$compiler_needs_object" = yes && -+ test -z "$libobjs"; then -+ # extract the archives, so we have objects to list. -+ # TODO: could optimize this to just extract one archive. -+ whole_archive_flag_spec= -+ fi -+ if test -n "$whole_archive_flag_spec"; then -+ save_libobjs=$libobjs -+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -+ test "X$libobjs" = "X " && libobjs= - else -- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 -- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 -- $AR t "$xabs" | sort | uniq -cd | while read -r count name -- do -- i=1 -- while test "$i" -le "$count" -- do -- # Put our $i before any first dot (extension) -- # Never overwrite any file -- name_to="$name" -- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" -- do -- name_to=`$echo "X$name_to" | $Xsed -e "s/$[^.]*$/\1-$i/"` -- done -- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" -- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? -- i=`expr $i + 1` -- done -- done -+ gentop="$output_objdir/${outputname}x" -+ generated="$generated $gentop" -+ -+ func_extract_archives $gentop $convenience -+ libobjs="$libobjs $func_extract_archives_result" -+ test "X$libobjs" = "X " && libobjs= - fi -+ fi - -- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` -- done -- fi -+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then -+ eval flag=\"$thread_safe_flag_spec\" -+ linker_flags="$linker_flags $flag" -+ fi - -- # Do each command in the archive commands. -- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then -- cmds=$old_archive_from_new_cmds -- else -- eval cmds=\"$old_archive_cmds\" -+ # Make a backup of the uninstalled library when relinking -+ if test "$mode" = relink; then -+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? -+ fi - -- if len=`expr "X$cmds" : ".*"` && -- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then -- cmds=$old_archive_cmds -- else -- # the command line is too long to link in one step, link in parts -- $echo "using piecewise archive linking..." -- save_RANLIB=$RANLIB -- RANLIB=: -- objlist= -- concat_cmds= -- save_oldobjs=$oldobjs -- # GNU ar 2.10+ was changed to match POSIX; thus no paths are -- # encoded into archives. This makes 'ar r' malfunction in -- # this piecewise linking case whenever conflicting object -- # names appear in distinct ar calls; check, warn and compensate. -- if (for obj in $save_oldobjs -- do -- $echo "X$obj" | $Xsed -e 's%^.*/%%' -- done | sort | sort -uc >/dev/null 2>&1); then -- : -+ # Do each of the archive commands. -+ if test "$module" = yes && test -n "$module_cmds" ; then -+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then -+ eval test_cmds=\"$module_expsym_cmds\" -+ cmds=$module_expsym_cmds - else -- $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2 -- $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2 -- AR_FLAGS=cq -+ eval test_cmds=\"$module_cmds\" -+ cmds=$module_cmds - fi -- # Is there a better way of finding the last object in the list? -- for obj in $save_oldobjs -- do -- last_oldobj=$obj -- done -- for obj in $save_oldobjs -- do -- oldobjs="$objlist $obj" -- objlist="$objlist $obj" -- eval test_cmds=\"$old_archive_cmds\" -- if len=`expr "X$test_cmds" : ".*"` && -- test "$len" -le "$max_cmd_len"; then -- : -- else -- # the above command should be used before it gets too long -- oldobjs=$objlist -- if test "$obj" = "$last_oldobj" ; then -- RANLIB=$save_RANLIB -- fi -- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" -- objlist= -- fi -- done -- RANLIB=$save_RANLIB -- oldobjs=$objlist -- if test "X$oldobjs" = "X" ; then -- eval cmds=\"\$concat_cmds\" -+ else -+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then -+ eval test_cmds=\"$archive_expsym_cmds\" -+ cmds=$archive_expsym_cmds - else -- eval cmds=\"\$concat_cmds~\$old_archive_cmds\" -+ eval test_cmds=\"$archive_cmds\" -+ cmds=$archive_cmds - fi - fi -- fi -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- eval cmd=\"$cmd\" -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- done -- -- if test -n "$generated"; then -- $show "${rm}r$generated" -- $run ${rm}r$generated -- fi -- -- # Now create the libtool archive. -- case $output in -- *.la) -- old_library= -- test "$build_old_libs" = yes && old_library="$libname.$libext" -- $show "creating $output" - -- # Preserve any variables that may affect compiler behavior -- for var in $variables_saved_for_relink; do -- if eval test -z \"\${$var+set}\"; then -- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" -- elif eval var_value=\$$var; test -z "$var_value"; then -- relink_command="$var=; export $var; $relink_command" -+ if test "X$skipped_export" != "X:" && -+ func_len " $test_cmds" && -+ len=$func_len_result && -+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then -+ : - else -- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` -- relink_command="$var=\"$var_value\"; export $var; $relink_command" -- fi -- done -- # Quote the link command for shipping. -- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" -- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` -- if test "$hardcode_automatic" = yes ; then -- relink_command= -- fi -+ # The command line is too long to link in one step, link piecewise -+ # or, if using GNU ld and skipped_export is not :, use a linker -+ # script. -+ -+ # Save the value of $output and $libobjs because we want to -+ # use them later. If we have whole_archive_flag_spec, we -+ # want to use save_libobjs as it was before -+ # whole_archive_flag_spec was expanded, because we can't -+ # assume the linker understands whole_archive_flag_spec. -+ # This may have to be revisited, in case too many -+ # convenience libraries get linked in and end up exceeding -+ # the spec. -+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then -+ save_libobjs=$libobjs -+ fi -+ save_output=$output -+ output_la=`$ECHO "X$output" | $Xsed -e "$basename"` - -+ # Clear the reloadable object creation command queue and -+ # initialize k to one. -+ test_cmds= -+ concat_cmds= -+ objlist= -+ last_robj= -+ k=1 - -- # Only create the output if not a dry run. -- if test -z "$run"; then -- for installed in no yes; do -- if test "$installed" = yes; then -- if test -z "$install_libdir"; then -- break -+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then -+ output=${output_objdir}/${output_la}.lnkscript -+ func_verbose "creating GNU ld script: $output" -+ $ECHO 'INPUT (' > $output -+ for obj in $save_libobjs -+ do -+ $ECHO "$obj" >> $output -+ done -+ $ECHO ')' >> $output -+ delfiles="$delfiles $output" -+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then -+ output=${output_objdir}/${output_la}.lnk -+ func_verbose "creating linker input file list: $output" -+ : > $output -+ set x $save_libobjs -+ shift -+ firstobj= -+ if test "$compiler_needs_object" = yes; then -+ firstobj="$1 " -+ shift - fi -- output="$output_objdir/$outputname"i -- # Replace all uninstalled libtool libraries with the installed ones -- newdependency_libs= -- for deplib in $dependency_libs; do -- case $deplib in -- *.la) -- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` -- eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` -- if test -z "$libdir"; then -- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 -- exit $EXIT_FAILURE -- fi -- newdependency_libs="$newdependency_libs $libdir/$name" -- ;; -- *) newdependency_libs="$newdependency_libs $deplib" ;; -- esac -+ for obj -+ do -+ $ECHO "$obj" >> $output - done -- dependency_libs="$newdependency_libs" -- newdlfiles= -- for lib in $dlfiles; do -- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` -- eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` -- if test -z "$libdir"; then -- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -- exit $EXIT_FAILURE -+ delfiles="$delfiles $output" -+ output=$firstobj\"$file_list_spec$output\" -+ else -+ if test -n "$save_libobjs"; then -+ func_verbose "creating reloadable object files..." -+ output=$output_objdir/$output_la-${k}.$objext -+ eval test_cmds=\"$reload_cmds\" -+ func_len " $test_cmds" -+ len0=$func_len_result -+ len=$len0 -+ -+ # Loop over the list of objects to be linked. -+ for obj in $save_libobjs -+ do -+ func_len " $obj" -+ func_arith $len + $func_len_result -+ len=$func_arith_result -+ if test "X$objlist" = X || -+ test "$len" -lt "$max_cmd_len"; then -+ func_append objlist " $obj" -+ else -+ # The command $test_cmds is almost too long, add a -+ # command to the queue. -+ if test "$k" -eq 1 ; then -+ # The first file doesn't have a previous command to add. -+ eval concat_cmds=\"$reload_cmds $objlist $last_robj\" -+ else -+ # All subsequent reloadable object files will link in -+ # the last one created. -+ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" -+ fi -+ last_robj=$output_objdir/$output_la-${k}.$objext -+ func_arith $k + 1 -+ k=$func_arith_result -+ output=$output_objdir/$output_la-${k}.$objext -+ objlist=$obj -+ func_len " $last_robj" -+ func_arith $len0 + $func_len_result -+ len=$func_arith_result -+ fi -+ done -+ # Handle the remaining objects by creating one last -+ # reloadable object file. All subsequent reloadable object -+ # files will link in the last one created. -+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -+ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" -+ if test -n "$last_robj"; then -+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" - fi -- newdlfiles="$newdlfiles $libdir/$name" -- done -- dlfiles="$newdlfiles" -- newdlprefiles= -- for lib in $dlprefiles; do -- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` -- eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` -- if test -z "$libdir"; then -- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -- exit $EXIT_FAILURE -+ delfiles="$delfiles $output" -+ -+ else -+ output= -+ fi -+ -+ if ${skipped_export-false}; then -+ func_verbose "generating symbol list for \`$libname.la'" -+ export_symbols="$output_objdir/$libname.exp" -+ $opt_dry_run || $RM $export_symbols -+ libobjs=$output -+ # Append the command to create the export file. -+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" -+ if test -n "$last_robj"; then -+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" - fi -- newdlprefiles="$newdlprefiles $libdir/$name" -+ fi -+ -+ test -n "$save_libobjs" && -+ func_verbose "creating a temporary reloadable object file: $output" -+ -+ # Loop through the commands generated above and execute them. -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $concat_cmds; do -+ IFS="$save_ifs" -+ $opt_silent || { -+ func_quote_for_expand "$cmd" -+ eval "func_echo $func_quote_for_expand_result" -+ } -+ $opt_dry_run || eval "$cmd" || { -+ lt_exit=$? -+ -+ # Restore the uninstalled library and exit -+ if test "$mode" = relink; then -+ ( cd "$output_objdir" && \ -+ $RM "${realname}T" && \ -+ $MV "${realname}U" "$realname" ) -+ fi -+ -+ exit $lt_exit -+ } - done -- dlprefiles="$newdlprefiles" -+ IFS="$save_ifs" -+ -+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then -+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' -+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' -+ fi -+ fi -+ -+ if ${skipped_export-false}; then -+ if test -n "$export_symbols" && test -n "$include_expsyms"; then -+ tmp_export_symbols="$export_symbols" -+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" -+ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' -+ fi -+ -+ if test -n "$orig_export_symbols"; then -+ # The given exports_symbols file has to be filtered, so filter it. -+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" -+ # FIXME: $output_objdir/$libname.filter potentially contains lots of -+ # 's' commands which not all seds can handle. GNU sed should be fine -+ # though. Also, the filter scales superlinearly with the number of -+ # global variables. join(1) would be nice here, but unfortunately -+ # isn't a blessed tool. -+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,$.*$$[ \,].*$,s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter -+ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" -+ export_symbols=$output_objdir/$libname.def -+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols -+ fi -+ fi -+ -+ libobjs=$output -+ # Restore the value of output. -+ output=$save_output -+ -+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then -+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -+ test "X$libobjs" = "X " && libobjs= -+ fi -+ # Expand the library linking commands again to reset the -+ # value of $libobjs for piecewise linking. -+ -+ # Do each of the archive commands. -+ if test "$module" = yes && test -n "$module_cmds" ; then -+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then -+ cmds=$module_expsym_cmds -+ else -+ cmds=$module_cmds -+ fi - else -- newdlfiles= -- for lib in $dlfiles; do -- case $lib in -- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; -- *) abs=`pwd`"/$lib" ;; -- esac -- newdlfiles="$newdlfiles $abs" -- done -- dlfiles="$newdlfiles" -- newdlprefiles= -- for lib in $dlprefiles; do -- case $lib in -- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; -- *) abs=`pwd`"/$lib" ;; -- esac -- newdlprefiles="$newdlprefiles $abs" -- done -- dlprefiles="$newdlprefiles" -+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then -+ cmds=$archive_expsym_cmds -+ else -+ cmds=$archive_cmds -+ fi - fi -- $rm $output -- # place dlname in correct position for cygwin -- tdlname=$dlname -- case $host,$output,$installed,$module,$dlname in -- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; -- esac -- $echo > $output "\ --# $outputname - a libtool library file --# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP --# --# Please DO NOT delete this file! --# It is necessary for linking the library. -+ fi - --# The name that we can dlopen(3). --dlname='$tdlname' -+ if test -n "$delfiles"; then -+ # Append the command to remove temporary files to $cmds. -+ eval cmds=\"\$cmds~\$RM $delfiles\" -+ fi - --# Names of this library. --library_names='$library_names' -+ # Add any objects from preloaded convenience libraries -+ if test -n "$dlprefiles"; then -+ gentop="$output_objdir/${outputname}x" -+ generated="$generated $gentop" - --# The name of the static archive. --old_library='$old_library' -+ func_extract_archives $gentop $dlprefiles -+ libobjs="$libobjs $func_extract_archives_result" -+ test "X$libobjs" = "X " && libobjs= -+ fi - --# Libraries that this one depends upon. --dependency_libs='$dependency_libs' -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ eval cmd=\"$cmd\" -+ $opt_silent || { -+ func_quote_for_expand "$cmd" -+ eval "func_echo $func_quote_for_expand_result" -+ } -+ $opt_dry_run || eval "$cmd" || { -+ lt_exit=$? -+ -+ # Restore the uninstalled library and exit -+ if test "$mode" = relink; then -+ ( cd "$output_objdir" && \ -+ $RM "${realname}T" && \ -+ $MV "${realname}U" "$realname" ) -+ fi - --# Version information for $libname. --current=$current --age=$age --revision=$revision -+ exit $lt_exit -+ } -+ done -+ IFS="$save_ifs" - --# Is this an already installed library? --installed=$installed -+ # Restore the uninstalled library and exit -+ if test "$mode" = relink; then -+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? - --# Should we warn about portability when linking against -modules? --shouldnotlink=$module -+ if test -n "$convenience"; then -+ if test -z "$whole_archive_flag_spec"; then -+ func_show_eval '${RM}r "$gentop"' -+ fi -+ fi - --# Files to dlopen/dlpreopen --dlopen='$dlfiles' --dlpreopen='$dlprefiles' -+ exit $EXIT_SUCCESS -+ fi - --# Directory that this library needs to be installed in: --libdir='$install_libdir'" -- if test "$installed" = no && test "$need_relink" = yes; then -- $echo >> $output "\ --relink_command=\"$relink_command\"" -+ # Create links to the real library. -+ for linkname in $linknames; do -+ if test "$realname" != "$linkname"; then -+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' - fi - done -- fi - -- # Do a symbolic link so that the libtool archive can be found in -- # LD_LIBRARY_PATH before the program is installed. -- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" -- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? -+ # If -module or -export-dynamic was specified, set the dlname. -+ if test "$module" = yes || test "$export_dynamic" = yes; then -+ # On all known operating systems, these are identical. -+ dlname="$soname" -+ fi -+ fi - ;; -- esac -- exit $EXIT_SUCCESS -- ;; - -- # libtool install mode -- install) -- modename="$modename: install" -+ obj) -+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -+ func_warning "\`-dlopen' is ignored for objects" -+ fi - -- # There may be an optional sh(1) argument at the beginning of -- # install_prog (especially on Windows NT). -- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || -- # Allow the use of GNU shtool's install command. -- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then -- # Aesthetically quote it. -- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` -- case $arg in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) -- arg="\"$arg\"" -- ;; -+ case " $deplibs" in -+ *\ -l* | *\ -L*) -+ func_warning "\`-l' and \`-L' are ignored for objects" ;; - esac -- install_prog="$arg " -- arg="$1" -- shift -- else -- install_prog= -- arg="$nonopt" -- fi - -- # The real first argument should be the name of the installation program. -- # Aesthetically quote it. -- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -- case $arg in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) -- arg="\"$arg\"" -- ;; -- esac -- install_prog="$install_prog$arg" -+ test -n "$rpath" && \ -+ func_warning "\`-rpath' is ignored for objects" - -- # We need to accept at least all the BSD install flags. -- dest= -- files= -- opts= -- prev= -- install_type= -- isdir=no -- stripme= -- for arg -- do -- if test -n "$dest"; then -- files="$files $dest" -- dest="$arg" -- continue -- fi -+ test -n "$xrpath" && \ -+ func_warning "\`-R' is ignored for objects" - -- case $arg in -- -d) isdir=yes ;; -- -f) prev="-f" ;; -- -g) prev="-g" ;; -- -m) prev="-m" ;; -- -o) prev="-o" ;; -- -s) -- stripme=" -s" -- continue -- ;; -- -*) ;; -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info' is ignored for objects" - -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for objects" -+ -+ case $output in -+ *.lo) -+ test -n "$objs$old_deplibs" && \ -+ func_fatal_error "cannot build library object \`$output' from non-libtool objects" -+ -+ libobj=$output -+ func_lo2o "$libobj" -+ obj=$func_lo2o_result -+ ;; - *) -- # If the previous option needed an argument, then skip it. -- if test -n "$prev"; then -- prev= -- else -- dest="$arg" -- continue -- fi -+ libobj= -+ obj="$output" - ;; - esac - -- # Aesthetically quote the argument. -- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -- case $arg in -- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) -- arg="\"$arg\"" -- ;; -- esac -- install_prog="$install_prog $arg" -- done -+ # Delete the old objects. -+ $opt_dry_run || $RM $obj $libobj - -- if test -z "$install_prog"; then -- $echo "$modename: you must specify an install program" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- fi -+ # Objects from convenience libraries. This assumes -+ # single-version convenience libraries. Whenever we create -+ # different ones for PIC/non-PIC, this we'll have to duplicate -+ # the extraction. -+ reload_conv_objs= -+ gentop= -+ # reload_cmds runs $LD directly, so let us get rid of -+ # -Wl from whole_archive_flag_spec and hope we can get by with -+ # turning comma into space.. -+ wl= - -- if test -n "$prev"; then -- $echo "$modename: the \`$prev' option requires an argument" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- fi -+ if test -n "$convenience"; then -+ if test -n "$whole_archive_flag_spec"; then -+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" -+ reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` -+ else -+ gentop="$output_objdir/${obj}x" -+ generated="$generated $gentop" - -- if test -z "$files"; then -- if test -z "$dest"; then -- $echo "$modename: no file or destination specified" 1>&2 -- else -- $echo "$modename: you must specify a destination" 1>&2 -+ func_extract_archives $gentop $convenience -+ reload_conv_objs="$reload_objs $func_extract_archives_result" -+ fi - fi -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- fi - -- # Strip any trailing slash from the destination. -- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` -+ # Create the old-style object. -+ reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - -- # Check to see that the destination is a directory. -- test -d "$dest" && isdir=yes -- if test "$isdir" = yes; then -- destdir="$dest" -- destname= -- else -- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` -- test "X$destdir" = "X$dest" && destdir=. -- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` -+ output="$obj" -+ func_execute_cmds "$reload_cmds" 'exit $?' - -- # Not a directory, so check to see that there is only one file specified. -- set dummy $files -- if test "$#" -gt 2; then -- $echo "$modename: \`$dest' is not a directory" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -+ # Exit if we aren't doing a library object file. -+ if test -z "$libobj"; then -+ if test -n "$gentop"; then -+ func_show_eval '${RM}r "$gentop"' -+ fi -+ -+ exit $EXIT_SUCCESS - fi -- fi -- case $destdir in -- [\\/]* | [A-Za-z]:[\\/]*) ;; -- *) -- for file in $files; do -- case $file in -- *.lo) ;; -- *) -- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -- done -+ -+ if test "$build_libtool_libs" != yes; then -+ if test -n "$gentop"; then -+ func_show_eval '${RM}r "$gentop"' -+ fi -+ -+ # Create an invalid libtool object if no PIC, so that we don't -+ # accidentally link it into a program. -+ # $show "echo timestamp > $libobj" -+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? -+ exit $EXIT_SUCCESS -+ fi -+ -+ if test -n "$pic_flag" || test "$pic_mode" != default; then -+ # Only do commands if we really have different PIC objects. -+ reload_objs="$libobjs $reload_conv_objs" -+ output="$libobj" -+ func_execute_cmds "$reload_cmds" 'exit $?' -+ fi -+ -+ if test -n "$gentop"; then -+ func_show_eval '${RM}r "$gentop"' -+ fi -+ -+ exit $EXIT_SUCCESS - ;; -- esac - -- # This variable tells wrapper scripts just to set variables rather -- # than running their programs. -- libtool_install_magic="$magic" -+ prog) -+ case $host in -+ *cygwin*) func_stripname '' '.exe' "$output" -+ output=$func_stripname_result.exe;; -+ esac -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info' is ignored for programs" - -- staticlibs= -- future_libdirs= -- current_libdirs= -- for file in $files; do -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for programs" - -- # Do each installation. -- case $file in -- *.$libext) -- # Do the static libraries later. -- staticlibs="$staticlibs $file" -+ test "$preload" = yes \ -+ && test "$dlopen_support" = unknown \ -+ && test "$dlopen_self" = unknown \ -+ && test "$dlopen_self_static" = unknown && \ -+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." -+ -+ case $host in -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # On Rhapsody replace the C library is the System framework -+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` -+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - ;; -+ esac - -- *.la) -- # Check to see that this really is a libtool archive. -- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : -- else -- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -+ case $host in -+ *-*-darwin*) -+ # Don't allow lazy linking, it breaks C++ global constructors -+ # But is supposedly fixed on 10.4 or later (yay!). -+ if test "$tagname" = CXX ; then -+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in -+ 10.[0123]) -+ compile_command="$compile_command ${wl}-bind_at_load" -+ finalize_command="$finalize_command ${wl}-bind_at_load" -+ ;; -+ esac - fi -+ # Time to change all our "foo.ltframework" stuff back to "-framework foo" -+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` -+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` -+ ;; -+ esac - -- library_names= -- old_library= -- relink_command= -- # If there is no directory component, then add one. -- case $file in -- */* | *\\*) . $file ;; -- *) . ./$file ;; -+ -+ # move library search paths that coincide with paths to not yet -+ # installed libraries to the beginning of the library search list -+ new_libs= -+ for path in $notinst_path; do -+ case " $new_libs " in -+ *" -L$path/$objdir "*) ;; -+ *) -+ case " $compile_deplibs " in -+ *" -L$path/$objdir "*) -+ new_libs="$new_libs -L$path/$objdir" ;; -+ esac -+ ;; -+ esac -+ done -+ for deplib in $compile_deplibs; do -+ case $deplib in -+ -L*) -+ case " $new_libs " in -+ *" $deplib "*) ;; -+ *) new_libs="$new_libs $deplib" ;; -+ esac -+ ;; -+ *) new_libs="$new_libs $deplib" ;; - esac -+ done -+ compile_deplibs="$new_libs" - -- # Add the libdir to current_libdirs if it is the destination. -- if test "X$destdir" = "X$libdir"; then -- case "$current_libdirs " in -+ -+ compile_command="$compile_command $compile_deplibs" -+ finalize_command="$finalize_command $finalize_deplibs" -+ -+ if test -n "$rpath$xrpath"; then -+ # If the user specified any rpath flags, then add them. -+ for libdir in $rpath $xrpath; do -+ # This is the magic to use -rpath. -+ case "$finalize_rpath " in - *" $libdir "*) ;; -- *) current_libdirs="$current_libdirs $libdir" ;; -+ *) finalize_rpath="$finalize_rpath $libdir" ;; - esac -- else -- # Note the libdir as a future libdir. -- case "$future_libdirs " in -+ done -+ fi -+ -+ # Now hardcode the library paths -+ rpath= -+ hardcode_libdirs= -+ for libdir in $compile_rpath $finalize_rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ ;; -+ esac -+ fi -+ else -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ rpath="$rpath $flag" -+ fi -+ elif test -n "$runpath_var"; then -+ case "$perm_rpath " in - *" $libdir "*) ;; -- *) future_libdirs="$future_libdirs $libdir" ;; -+ *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) -+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` -+ case :$dllsearchpath: in -+ *":$libdir:"*) ;; -+ ::) dllsearchpath=$libdir;; -+ *) dllsearchpath="$dllsearchpath:$libdir";; -+ esac -+ case :$dllsearchpath: in -+ *":$testbindir:"*) ;; -+ ::) dllsearchpath=$testbindir;; -+ *) dllsearchpath="$dllsearchpath:$testbindir";; -+ esac -+ ;; -+ esac -+ done -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ eval rpath=\" $hardcode_libdir_flag_spec\" -+ fi -+ compile_rpath="$rpath" - -- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ -- test "X$dir" = "X$file/" && dir= -- dir="$dir$objdir" -- -- if test -n "$relink_command"; then -- # Determine the prefix the user has applied to our future dir. -- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` -- -- # Don't allow the user to place us outside of our expected -- # location b/c this prevents finding dependent libraries that -- # are installed to the same prefix. -- # At present, this check doesn't affect windows .dll's that -- # are installed into $libdir/../bin (currently, that works fine) -- # but it's something to keep an eye on. -- if test "$inst_prefix_dir" = "$destdir"; then -- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 -- exit $EXIT_FAILURE -- fi -- -- if test -n "$inst_prefix_dir"; then -- # Stick the inst_prefix_dir data into the link command. -- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` -- else -- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` -- fi -- -- $echo "$modename: warning: relinking \`$file'" 1>&2 -- $show "$relink_command" -- if $run eval "$relink_command"; then : -+ rpath= -+ hardcode_libdirs= -+ for libdir in $finalize_rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ ;; -+ esac -+ fi - else -- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 -- exit $EXIT_FAILURE -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ rpath="$rpath $flag" - fi -+ elif test -n "$runpath_var"; then -+ case "$finalize_perm_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; -+ esac - fi -+ done -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ eval rpath=\" $hardcode_libdir_flag_spec\" -+ fi -+ finalize_rpath="$rpath" - -- # See the names of the shared library. -- set dummy $library_names -- if test -n "$2"; then -- realname="$2" -- shift -- shift -+ if test -n "$libobjs" && test "$build_old_libs" = yes; then -+ # Transform all the library objects into standard objects. -+ compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ fi - -- srcname="$realname" -- test -n "$relink_command" && srcname="$realname"T -+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - -- # Install the shared library and build the symlinks. -- $show "$install_prog $dir/$srcname $destdir/$realname" -- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? -- if test -n "$stripme" && test -n "$striplib"; then -- $show "$striplib $destdir/$realname" -- $run eval "$striplib $destdir/$realname" || exit $? -- fi -+ # template prelinking step -+ if test -n "$prelink_cmds"; then -+ func_execute_cmds "$prelink_cmds" 'exit $?' -+ fi - -- if test "$#" -gt 0; then -- # Delete the old symlinks, and create new ones. -- for linkname -- do -- if test "$linkname" != "$realname"; then -- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" -- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" -- fi -- done -- fi -+ wrappers_required=yes -+ case $host in -+ *cygwin* | *mingw* ) -+ if test "$build_libtool_libs" != yes; then -+ wrappers_required=no -+ fi -+ ;; -+ *cegcc) -+ # Disable wrappers for cegcc, we are cross compiling anyway. -+ wrappers_required=no -+ ;; -+ *) -+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then -+ wrappers_required=no -+ fi -+ ;; -+ esac -+ if test "$wrappers_required" = no; then -+ # Replace the output file specification. -+ compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -+ link_command="$compile_command$compile_rpath" - -- # Do each command in the postinstall commands. -- lib="$destdir/$realname" -- cmds=$postinstall_cmds -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- fi -+ # We have no uninstalled library dependencies, so finalize right now. -+ exit_status=0 -+ func_show_eval "$link_command" 'exit_status=$?' - -- # Install the pseudo-library for information purposes. -- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -- instname="$dir/$name"i -- $show "$install_prog $instname $destdir/$name" -- $run eval "$install_prog $instname $destdir/$name" || exit $? -+ # Delete the generated files. -+ if test -f "$output_objdir/${outputname}S.${objext}"; then -+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' -+ fi - -- # Maybe install the static library, too. -- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" -- ;; -+ exit $exit_status -+ fi - -- *.lo) -- # Install (i.e. copy) a libtool object. -+ if test -n "$compile_shlibpath$finalize_shlibpath"; then -+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" -+ fi -+ if test -n "$finalize_shlibpath"; then -+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" -+ fi - -- # Figure out destination file name, if it wasn't already specified. -- if test -n "$destname"; then -- destfile="$destdir/$destname" -- else -- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -- destfile="$destdir/$destfile" -+ compile_var= -+ finalize_var= -+ if test -n "$runpath_var"; then -+ if test -n "$perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $perm_rpath; do -+ rpath="$rpath$dir:" -+ done -+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi -- -- # Deduce the name of the destination old-style object file. -- case $destfile in -- *.lo) -- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` -- ;; -- *.$objext) -- staticdest="$destfile" -- destfile= -- ;; -- *) -- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -- -- # Install the libtool object if requested. -- if test -n "$destfile"; then -- $show "$install_prog $file $destfile" -- $run eval "$install_prog $file $destfile" || exit $? -+ if test -n "$finalize_perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $finalize_perm_rpath; do -+ rpath="$rpath$dir:" -+ done -+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi -+ fi - -- # Install the old object if enabled. -- if test "$build_old_libs" = yes; then -- # Deduce the name of the old-style object file. -- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` -- -- $show "$install_prog $staticobj $staticdest" -- $run eval "$install_prog \$staticobj \$staticdest" || exit $? -- fi -+ if test "$no_install" = yes; then -+ # We don't need to create a wrapper script. -+ link_command="$compile_var$compile_command$compile_rpath" -+ # Replace the output file specification. -+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -+ # Delete the old output file. -+ $opt_dry_run || $RM $output -+ # Link the executable and exit -+ func_show_eval "$link_command" 'exit $?' - exit $EXIT_SUCCESS -- ;; -+ fi - -- *) -- # Figure out destination file name, if it wasn't already specified. -- if test -n "$destname"; then -- destfile="$destdir/$destname" -+ if test "$hardcode_action" = relink; then -+ # Fast installation is not supported -+ link_command="$compile_var$compile_command$compile_rpath" -+ relink_command="$finalize_var$finalize_command$finalize_rpath" -+ -+ func_warning "this platform does not like uninstalled shared libraries" -+ func_warning "\`$output' will be relinked during installation" -+ else -+ if test "$fast_install" != no; then -+ link_command="$finalize_var$compile_command$finalize_rpath" -+ if test "$fast_install" = yes; then -+ relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` -+ else -+ # fast_install is set to needless -+ relink_command= -+ fi - else -- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -- destfile="$destdir/$destfile" -+ link_command="$compile_var$compile_command$compile_rpath" -+ relink_command="$finalize_var$finalize_command$finalize_rpath" - fi -+ fi - -- # If the file is missing, and there is a .exe on the end, strip it -- # because it is most likely a libtool script we actually want to -- # install -- stripped_ext="" -- case $file in -- *.exe) -- if test ! -f "$file"; then -- file=`$echo $file|${SED} 's,.exe$,,'` -- stripped_ext=".exe" -- fi -- ;; -- esac -- -- # Do a test to see if this is really a libtool program. -- case $host in -- *cygwin*|*mingw*) -- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` -- ;; -- *) -- wrapper=$file -- ;; -- esac -- if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then -- notinst_deplibs= -- relink_command= -- -- # To insure that "foo" is sourced, and not "foo.exe", -- # finese the cygwin/MSYS system by explicitly sourcing "foo." -- # which disallows the automatic-append-.exe behavior. -- case $build in -- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; -- *) wrapperdot=${wrapper} ;; -- esac -- # If there is no directory component, then add one. -- case $file in -- */* | *\\*) . ${wrapperdot} ;; -- *) . ./${wrapperdot} ;; -- esac -- -- # Check the variables that should have been set. -- if test -z "$notinst_deplibs"; then -- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 -- exit $EXIT_FAILURE -- fi -+ # Replace the output file specification. -+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - -- finalize=yes -- for lib in $notinst_deplibs; do -- # Check to see that each library is installed. -- libdir= -- if test -f "$lib"; then -- # If there is no directory component, then add one. -- case $lib in -- */* | *\\*) . $lib ;; -- *) . ./$lib ;; -- esac -- fi -- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test -- if test -n "$libdir" && test ! -f "$libfile"; then -- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 -- finalize=no -- fi -- done -+ # Delete the old output files. -+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - -- relink_command= -- # To insure that "foo" is sourced, and not "foo.exe", -- # finese the cygwin/MSYS system by explicitly sourcing "foo." -- # which disallows the automatic-append-.exe behavior. -- case $build in -- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; -- *) wrapperdot=${wrapper} ;; -- esac -- # If there is no directory component, then add one. -- case $file in -- */* | *\\*) . ${wrapperdot} ;; -- *) . ./${wrapperdot} ;; -- esac -+ func_show_eval "$link_command" 'exit $?' - -- outputname= -- if test "$fast_install" = no && test -n "$relink_command"; then -- if test "$finalize" = yes && test -z "$run"; then -- tmpdir="/tmp" -- test -n "$TMPDIR" && tmpdir="$TMPDIR" -- tmpdir="$tmpdir/libtool-$$" -- save_umask=`umask` -- umask 0077 -- if $mkdir "$tmpdir"; then -- umask $save_umask -- else -- umask $save_umask -- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 -- continue -- fi -- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` -- outputname="$tmpdir/$file" -- # Replace the output file specification. -- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` -+ # Now create the wrapper script. -+ func_verbose "creating $output" - -- $show "$relink_command" -- if $run eval "$relink_command"; then : -- else -- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 -- ${rm}r "$tmpdir" -- continue -- fi -- file="$outputname" -- else -- $echo "$modename: warning: cannot relink \`$file'" 1>&2 -- fi -+ # Quote the relink command for shipping. -+ if test -n "$relink_command"; then -+ # Preserve any variables that may affect compiler behavior -+ for var in $variables_saved_for_relink; do -+ if eval test -z \"\${$var+set}\"; then -+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" -+ elif eval var_value=\$$var; test -z "$var_value"; then -+ relink_command="$var=; export $var; $relink_command" - else -- # Install the binary that we compiled earlier. -- file=`$echo "X$file$stripped_ext" | $Xsed -e "s%$[^/]*$$%$objdir/\1%"` -+ func_quote_for_eval "$var_value" -+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi -- fi -+ done -+ relink_command="(cd `pwd`; $relink_command)" -+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` -+ fi - -- # remove .exe since cygwin /usr/bin/install will append another -- # one anyways -- case $install_prog,$host in -- */usr/bin/install*,*cygwin*) -- case $file:$destfile in -- *.exe:*.exe) -- # this is ok -- ;; -- *.exe:*) -- destfile=$destfile.exe -- ;; -- *:*.exe) -- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` -- ;; -- esac -- ;; -+ # Quote $ECHO for shipping. -+ if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then -+ case $progpath in -+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; -+ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; - esac -- $show "$install_prog$stripme $file $destfile" -- $run eval "$install_prog\$stripme \$file \$destfile" || exit $? -- test -n "$outputname" && ${rm}r "$tmpdir" -- ;; -- esac -- done -+ qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` -+ else -+ qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` -+ fi - -- for file in $staticlibs; do -- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -+ # Only actually do things if not in dry run mode. -+ $opt_dry_run || { -+ # win32 will think the script is a binary if it has -+ # a .exe suffix, so we strip it off here. -+ case $output in -+ *.exe) func_stripname '' '.exe' "$output" -+ output=$func_stripname_result ;; -+ esac -+ # test for cygwin because mv fails w/o .exe extensions -+ case $host in -+ *cygwin*) -+ exeext=.exe -+ func_stripname '' '.exe' "$outputname" -+ outputname=$func_stripname_result ;; -+ *) exeext= ;; -+ esac -+ case $host in -+ *cygwin* | *mingw* ) -+ func_dirname_and_basename "$output" "" "." -+ output_name=$func_basename_result -+ output_path=$func_dirname_result -+ cwrappersource="$output_path/$objdir/lt-$output_name.c" -+ cwrapper="$output_path/$output_name.exe" -+ $RM $cwrappersource $cwrapper -+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 -+ -+ func_emit_cwrapperexe_src > $cwrappersource -+ -+ # The wrapper executable is built using the $host compiler, -+ # because it contains $host paths and files. If cross- -+ # compiling, it, like the target executable, must be -+ # executed on the $host or under an emulation environment. -+ $opt_dry_run || { -+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource -+ $STRIP $cwrapper -+ } -+ -+ # Now, create the wrapper script for func_source use: -+ func_ltwrapper_scriptname $cwrapper -+ $RM $func_ltwrapper_scriptname_result -+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 -+ $opt_dry_run || { -+ # note: this script will not be executed, so do not chmod. -+ if test "x$build" = "x$host" ; then -+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result -+ else -+ func_emit_wrapper no > $func_ltwrapper_scriptname_result -+ fi -+ } -+ ;; -+ * ) -+ $RM $output -+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - -- # Set up the ranlib parameters. -- oldlib="$destdir/$name" -+ func_emit_wrapper no > $output -+ chmod +x $output -+ ;; -+ esac -+ } -+ exit $EXIT_SUCCESS -+ ;; -+ esac - -- $show "$install_prog $file $oldlib" -- $run eval "$install_prog \$file \$oldlib" || exit $? -+ # See if we need to build an old-fashioned archive. -+ for oldlib in $oldlibs; do - -- if test -n "$stripme" && test -n "$old_striplib"; then -- $show "$old_striplib $oldlib" -- $run eval "$old_striplib $oldlib" || exit $? -+ if test "$build_libtool_libs" = convenience; then -+ oldobjs="$libobjs_save $symfileobj" -+ addlibs="$convenience" -+ build_libtool_libs=no -+ else -+ if test "$build_libtool_libs" = module; then -+ oldobjs="$libobjs_save" -+ build_libtool_libs=no -+ else -+ oldobjs="$old_deplibs $non_pic_objects" -+ if test "$preload" = yes && test -f "$symfileobj"; then -+ oldobjs="$oldobjs $symfileobj" -+ fi -+ fi -+ addlibs="$old_convenience" - fi - -- # Do each command in the postinstall commands. -- cmds=$old_postinstall_cmds -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- done -+ if test -n "$addlibs"; then -+ gentop="$output_objdir/${outputname}x" -+ generated="$generated $gentop" - -- if test -n "$future_libdirs"; then -- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 -- fi -+ func_extract_archives $gentop $addlibs -+ oldobjs="$oldobjs $func_extract_archives_result" -+ fi - -- if test -n "$current_libdirs"; then -- # Maybe just do a dry run. -- test -n "$run" && current_libdirs=" -n$current_libdirs" -- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' -- else -- exit $EXIT_SUCCESS -- fi -- ;; -+ # Do each command in the archive commands. -+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then -+ cmds=$old_archive_from_new_cmds -+ else - -- # libtool finish mode -- finish) -- modename="$modename: finish" -- libdirs="$nonopt" -- admincmds= -+ # Add any objects from preloaded convenience libraries -+ if test -n "$dlprefiles"; then -+ gentop="$output_objdir/${outputname}x" -+ generated="$generated $gentop" - -- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then -- for dir -- do -- libdirs="$libdirs $dir" -- done -+ func_extract_archives $gentop $dlprefiles -+ oldobjs="$oldobjs $func_extract_archives_result" -+ fi - -- for libdir in $libdirs; do -- if test -n "$finish_cmds"; then -- # Do each command in the finish commands. -- cmds=$finish_cmds -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- $show "$cmd" -- $run eval "$cmd" || admincmds="$admincmds -- $cmd" -+ # POSIX demands no paths to be encoded in archives. We have -+ # to avoid creating archives with duplicate basenames if we -+ # might have to extract them afterwards, e.g., when creating a -+ # static archive out of a convenience library, or when linking -+ # the entirety of a libtool archive into another (currently -+ # not supported by libtool). -+ if (for obj in $oldobjs -+ do -+ func_basename "$obj" -+ $ECHO "$func_basename_result" -+ done | sort | sort -uc >/dev/null 2>&1); then -+ : -+ else -+ $ECHO "copying selected object files to avoid basename conflicts..." -+ gentop="$output_objdir/${outputname}x" -+ generated="$generated $gentop" -+ func_mkdir_p "$gentop" -+ save_oldobjs=$oldobjs -+ oldobjs= -+ counter=1 -+ for obj in $save_oldobjs -+ do -+ func_basename "$obj" -+ objbase="$func_basename_result" -+ case " $oldobjs " in -+ " ") oldobjs=$obj ;; -+ *[\ /]"$objbase "*) -+ while :; do -+ # Make sure we don't pick an alternate name that also -+ # overlaps. -+ newobj=lt$counter-$objbase -+ func_arith $counter + 1 -+ counter=$func_arith_result -+ case " $oldobjs " in -+ *[\ /]"$newobj "*) ;; -+ *) if test ! -f "$gentop/$newobj"; then break; fi ;; -+ esac -+ done -+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" -+ oldobjs="$oldobjs $gentop/$newobj" -+ ;; -+ *) oldobjs="$oldobjs $obj" ;; -+ esac - done -- IFS="$save_ifs" -- fi -- if test -n "$finish_eval"; then -- # Do the single finish_eval. -- eval cmds=\"$finish_eval\" -- $run eval "$cmds" || admincmds="$admincmds -- $cmds" - fi -- done -- fi -- -- # Exit here if they wanted silent mode. -- test "$show" = : && exit $EXIT_SUCCESS -+ eval cmds=\"$old_archive_cmds\" - -- $echo "----------------------------------------------------------------------" -- $echo "Libraries have been installed in:" -- for libdir in $libdirs; do -- $echo " $libdir" -+ func_len " $cmds" -+ len=$func_len_result -+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then -+ cmds=$old_archive_cmds -+ else -+ # the command line is too long to link in one step, link in parts -+ func_verbose "using piecewise archive linking..." -+ save_RANLIB=$RANLIB -+ RANLIB=: -+ objlist= -+ concat_cmds= -+ save_oldobjs=$oldobjs -+ oldobjs= -+ # Is there a better way of finding the last object in the list? -+ for obj in $save_oldobjs -+ do -+ last_oldobj=$obj -+ done -+ eval test_cmds=\"$old_archive_cmds\" -+ func_len " $test_cmds" -+ len0=$func_len_result -+ len=$len0 -+ for obj in $save_oldobjs -+ do -+ func_len " $obj" -+ func_arith $len + $func_len_result -+ len=$func_arith_result -+ func_append objlist " $obj" -+ if test "$len" -lt "$max_cmd_len"; then -+ : -+ else -+ # the above command should be used before it gets too long -+ oldobjs=$objlist -+ if test "$obj" = "$last_oldobj" ; then -+ RANLIB=$save_RANLIB -+ fi -+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" -+ objlist= -+ len=$len0 -+ fi -+ done -+ RANLIB=$save_RANLIB -+ oldobjs=$objlist -+ if test "X$oldobjs" = "X" ; then -+ eval cmds=\"\$concat_cmds\" -+ else -+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\" -+ fi -+ fi -+ fi -+ func_execute_cmds "$cmds" 'exit $?' - done -- $echo -- $echo "If you ever happen to want to link against installed libraries" -- $echo "in a given directory, LIBDIR, you must either use libtool, and" -- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" -- $echo "flag during linking and do at least one of the following:" -- if test -n "$shlibpath_var"; then -- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" -- $echo " during execution" -- fi -- if test -n "$runpath_var"; then -- $echo " - add LIBDIR to the \`$runpath_var' environment variable" -- $echo " during linking" -- fi -- if test -n "$hardcode_libdir_flag_spec"; then -- libdir=LIBDIR -- eval flag=\"$hardcode_libdir_flag_spec\" -- -- $echo " - use the \`$flag' linker flag" -- fi -- if test -n "$admincmds"; then -- $echo " - have your system administrator run these commands:$admincmds" -- fi -- if test -f /etc/ld.so.conf; then -- $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" -- fi -- $echo -- $echo "See any operating system documentation about shared libraries for" -- $echo "more information, such as the ld(1) and ld.so(8) manual pages." -- $echo "----------------------------------------------------------------------" -- exit $EXIT_SUCCESS -- ;; - -- # libtool execute mode -- execute) -- modename="$modename: execute" -- -- # The first argument is the command name. -- cmd="$nonopt" -- if test -z "$cmd"; then -- $echo "$modename: you must specify a COMMAND" 1>&2 -- $echo "$help" -- exit $EXIT_FAILURE -- fi -+ test -n "$generated" && \ -+ func_show_eval "${RM}r$generated" - -- # Handle -dlopen flags immediately. -- for file in $execute_dlfiles; do -- if test ! -f "$file"; then -- $echo "$modename: \`$file' is not a file" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- fi -+ # Now create the libtool archive. -+ case $output in -+ *.la) -+ old_library= -+ test "$build_old_libs" = yes && old_library="$libname.$libext" -+ func_verbose "creating $output" - -- dir= -- case $file in -- *.la) -- # Check to see that this really is a libtool archive. -- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : -+ # Preserve any variables that may affect compiler behavior -+ for var in $variables_saved_for_relink; do -+ if eval test -z \"\${$var+set}\"; then -+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" -+ elif eval var_value=\$$var; test -z "$var_value"; then -+ relink_command="$var=; export $var; $relink_command" - else -- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -+ func_quote_for_eval "$var_value" -+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi -+ done -+ # Quote the link command for shipping. -+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" -+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` -+ if test "$hardcode_automatic" = yes ; then -+ relink_command= -+ fi - -- # Read the libtool library. -- dlname= -- library_names= -+ # Only create the output if not a dry run. -+ $opt_dry_run || { -+ for installed in no yes; do -+ if test "$installed" = yes; then -+ if test -z "$install_libdir"; then -+ break -+ fi -+ output="$output_objdir/$outputname"i -+ # Replace all uninstalled libtool libraries with the installed ones -+ newdependency_libs= -+ for deplib in $dependency_libs; do -+ case $deplib in -+ *.la) -+ func_basename "$deplib" -+ name="$func_basename_result" -+ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` -+ test -z "$libdir" && \ -+ func_fatal_error "\`$deplib' is not a valid libtool archive" -+ newdependency_libs="$newdependency_libs $libdir/$name" -+ ;; -+ *) newdependency_libs="$newdependency_libs $deplib" ;; -+ esac -+ done -+ dependency_libs="$newdependency_libs" -+ newdlfiles= -+ -+ for lib in $dlfiles; do -+ case $lib in -+ *.la) -+ func_basename "$lib" -+ name="$func_basename_result" -+ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` -+ test -z "$libdir" && \ -+ func_fatal_error "\`$lib' is not a valid libtool archive" -+ newdlfiles="$newdlfiles $libdir/$name" -+ ;; -+ *) newdlfiles="$newdlfiles $lib" ;; -+ esac -+ done -+ dlfiles="$newdlfiles" -+ newdlprefiles= -+ for lib in $dlprefiles; do -+ case $lib in -+ *.la) -+ # Only pass preopened files to the pseudo-archive (for -+ # eventual linking with the app. that links it) if we -+ # didn't already link the preopened objects directly into -+ # the library: -+ func_basename "$lib" -+ name="$func_basename_result" -+ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` -+ test -z "$libdir" && \ -+ func_fatal_error "\`$lib' is not a valid libtool archive" -+ newdlprefiles="$newdlprefiles $libdir/$name" -+ ;; -+ esac -+ done -+ dlprefiles="$newdlprefiles" -+ else -+ newdlfiles= -+ for lib in $dlfiles; do -+ case $lib in -+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; -+ *) abs=`pwd`"/$lib" ;; -+ esac -+ newdlfiles="$newdlfiles $abs" -+ done -+ dlfiles="$newdlfiles" -+ newdlprefiles= -+ for lib in $dlprefiles; do -+ case $lib in -+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; -+ *) abs=`pwd`"/$lib" ;; -+ esac -+ newdlprefiles="$newdlprefiles $abs" -+ done -+ dlprefiles="$newdlprefiles" -+ fi -+ $RM $output -+ # place dlname in correct position for cygwin -+ tdlname=$dlname -+ case $host,$output,$installed,$module,$dlname in -+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; -+ esac -+ $ECHO > $output "\ -+# $outputname - a libtool library file -+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -+# -+# Please DO NOT delete this file! -+# It is necessary for linking the library. - -- # If there is no directory component, then add one. -- case $file in -- */* | *\\*) . $file ;; -- *) . ./$file ;; -- esac -+# The name that we can dlopen(3). -+dlname='$tdlname' - -- # Skip this library if it cannot be dlopened. -- if test -z "$dlname"; then -- # Warn if it was a shared library. -- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" -- continue -- fi -+# Names of this library. -+library_names='$library_names' - -- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` -- test "X$dir" = "X$file" && dir=. -+# The name of the static archive. -+old_library='$old_library' - -- if test -f "$dir/$objdir/$dlname"; then -- dir="$dir/$objdir" -- else -- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 -- exit $EXIT_FAILURE -- fi -- ;; -+# Linker flags that can not go in dependency_libs. -+inherited_linker_flags='$new_inherited_linker_flags' - -- *.lo) -- # Just add the directory containing the .lo file. -- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` -- test "X$dir" = "X$file" && dir=. -- ;; -+# Libraries that this one depends upon. -+dependency_libs='$dependency_libs' - -- *) -- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 -- continue -- ;; -- esac -+# Names of additional weak libraries provided by this library -+weak_library_names='$weak_libs' - -- # Get the absolute pathname. -- absdir=`cd "$dir" && pwd` -- test -n "$absdir" && dir="$absdir" -+# Version information for $libname. -+current=$current -+age=$age -+revision=$revision - -- # Now add the directory to shlibpath_var. -- if eval "test -z \"\$$shlibpath_var\""; then -- eval "$shlibpath_var=\"\$dir\"" -- else -- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" -- fi -- done -+# Is this an already installed library? -+installed=$installed - -- # This variable tells wrapper scripts just to set shlibpath_var -- # rather than running their programs. -- libtool_execute_magic="$magic" -+# Should we warn about portability when linking against -modules? -+shouldnotlink=$module - -- # Check if any of the arguments is a wrapper script. -- args= -- for file -- do -- case $file in -- -*) ;; -- *) -- # Do a test to see if this is really a libtool program. -- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -- # If there is no directory component, then add one. -- case $file in -- */* | *\\*) . $file ;; -- *) . ./$file ;; -- esac -+# Files to dlopen/dlpreopen -+dlopen='$dlfiles' -+dlpreopen='$dlprefiles' - -- # Transform arg to wrapped name. -- file="$progdir/$program" -- fi -- ;; -- esac -- # Quote arguments (to preserve shell metacharacters). -- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` -- args="$args \"$file\"" -- done -+# Directory that this library needs to be installed in: -+libdir='$install_libdir'" -+ if test "$installed" = no && test "$need_relink" = yes; then -+ $ECHO >> $output "\ -+relink_command=\"$relink_command\"" -+ fi -+ done -+ } - -- if test -z "$run"; then -- if test -n "$shlibpath_var"; then -- # Export the shlibpath_var. -- eval "export $shlibpath_var" -- fi -+ # Do a symbolic link so that the libtool archive can be found in -+ # LD_LIBRARY_PATH before the program is installed. -+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' -+ ;; -+ esac -+ exit $EXIT_SUCCESS -+} - -- # Restore saved environment variables -- if test "${save_LC_ALL+set}" = set; then -- LC_ALL="$save_LC_ALL"; export LC_ALL -- fi -- if test "${save_LANG+set}" = set; then -- LANG="$save_LANG"; export LANG -- fi -+{ test "$mode" = link || test "$mode" = relink; } && -+ func_mode_link ${1+"$@"} - -- # Now prepare to actually exec the command. -- exec_cmd="\$cmd$args" -- else -- # Display what would be done. -- if test -n "$shlibpath_var"; then -- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" -- $echo "export $shlibpath_var" -- fi -- $echo "$cmd$args" -- exit $EXIT_SUCCESS -- fi -- ;; - -- # libtool clean and uninstall mode -- clean | uninstall) -- modename="$modename: $mode" -- rm="$nonopt" -+# func_mode_uninstall arg... -+func_mode_uninstall () -+{ -+ $opt_debug -+ RM="$nonopt" - files= - rmforce= - exit_status=0 -@@ -6018,30 +8209,28 @@ relink_command=\"$relink_command\"" - for arg - do - case $arg in -- -f) rm="$rm $arg"; rmforce=yes ;; -- -*) rm="$rm $arg" ;; -+ -f) RM="$RM $arg"; rmforce=yes ;; -+ -*) RM="$RM $arg" ;; - *) files="$files $arg" ;; - esac - done - -- if test -z "$rm"; then -- $echo "$modename: you must specify an RM program" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- fi -+ test -z "$RM" && \ -+ func_fatal_help "you must specify an RM program" - - rmdirs= - - origobjdir="$objdir" - for file in $files; do -- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$dir" = "X$file"; then -- dir=. -+ func_dirname "$file" "" "." -+ dir="$func_dirname_result" -+ if test "X$dir" = X.; then - objdir="$origobjdir" - else - objdir="$dir/$origobjdir" - fi -- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -+ func_basename "$file" -+ name="$func_basename_result" - test "$mode" = uninstall && objdir="$dir" - - # Remember objdir for removal later, being careful to avoid duplicates -@@ -6053,9 +8242,9 @@ relink_command=\"$relink_command\"" - fi - - # Don't error if the file doesn't exist and rm -f was used. -- if (test -L "$file") >/dev/null 2>&1 \ -- || (test -h "$file") >/dev/null 2>&1 \ -- || test -f "$file"; then -+ if { test -L "$file"; } >/dev/null 2>&1 || -+ { test -h "$file"; } >/dev/null 2>&1 || -+ test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 -@@ -6069,69 +8258,56 @@ relink_command=\"$relink_command\"" - case $name in - *.la) - # Possibly a libtool archive, so verify it. -- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -- . $dir/$name -+ if func_lalib_p "$file"; then -+ func_source $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $objdir/$n" - done - test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" -- test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - -- if test "$mode" = uninstall; then -+ case "$mode" in -+ clean) -+ case " $library_names " in -+ # " " in the beginning catches empty $dlname -+ *" $dlname "*) ;; -+ *) rmfiles="$rmfiles $objdir/$dlname" ;; -+ esac -+ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" -+ ;; -+ uninstall) - if test -n "$library_names"; then - # Do each command in the postuninstall commands. -- cmds=$postuninstall_cmds -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- $show "$cmd" -- $run eval "$cmd" -- if test "$?" -ne 0 && test "$rmforce" != yes; then -- exit_status=1 -- fi -- done -- IFS="$save_ifs" -+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. -- cmds=$old_postuninstall_cmds -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- $show "$cmd" -- $run eval "$cmd" -- if test "$?" -ne 0 && test "$rmforce" != yes; then -- exit_status=1 -- fi -- done -- IFS="$save_ifs" -+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - # FIXME: should reinstall the best remaining shared library. -- fi -+ ;; -+ esac - fi - ;; - - *.lo) - # Possibly a libtool object, so verify it. -- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -+ if func_lalib_p "$file"; then - - # Read the .lo file -- . $dir/$name -+ func_source $dir/$name - - # Add PIC object to the list of files to remove. -- if test -n "$pic_object" \ -- && test "$pic_object" != none; then -+ if test -n "$pic_object" && -+ test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. -- if test -n "$non_pic_object" \ -- && test "$non_pic_object" != none; then -+ if test -n "$non_pic_object" && -+ test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" - fi - fi -@@ -6142,17 +8318,26 @@ relink_command=\"$relink_command\"" - noexename=$name - case $file in - *.exe) -- file=`$echo $file|${SED} 's,.exe$,,'` -- noexename=`$echo $name|${SED} 's,.exe$,,'` -+ func_stripname '' '.exe' "$file" -+ file=$func_stripname_result -+ func_stripname '' '.exe' "$name" -+ noexename=$func_stripname_result - # $file with .exe has already been added to rmfiles, - # add $file without .exe - rmfiles="$rmfiles $file" - ;; - esac - # Do a test to see if this is a libtool program. -- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -- relink_command= -- . $dir/$noexename -+ if func_ltwrapper_p "$file"; then -+ if func_ltwrapper_executable_p "$file"; then -+ func_ltwrapper_scriptname "$file" -+ relink_command= -+ func_source $func_ltwrapper_scriptname_result -+ rmfiles="$rmfiles $func_ltwrapper_scriptname_result" -+ else -+ relink_command= -+ func_source $dir/$noexename -+ fi - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles -@@ -6167,237 +8352,38 @@ relink_command=\"$relink_command\"" - fi - ;; - esac -- $show "$rm $rmfiles" -- $run $rm $rmfiles || exit_status=1 -+ func_show_eval "$RM $rmfiles" 'exit_status=1' - done - objdir="$origobjdir" - - # Try to remove the ${objdir}s in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then -- $show "rmdir $dir" -- $run rmdir $dir >/dev/null 2>&1 -+ func_show_eval "rmdir $dir >/dev/null 2>&1" - fi - done - - exit $exit_status -- ;; -+} - -- "") -- $echo "$modename: you must specify a MODE" 1>&2 -- $echo "$generic_help" 1>&2 -- exit $EXIT_FAILURE -- ;; -- esac -+{ test "$mode" = uninstall || test "$mode" = clean; } && -+ func_mode_uninstall ${1+"$@"} - -- if test -z "$exec_cmd"; then -- $echo "$modename: invalid operation mode \`$mode'" 1>&2 -- $echo "$generic_help" 1>&2 -- exit $EXIT_FAILURE -- fi --fi # test -z "$show_help" -+test -z "$mode" && { -+ help="$generic_help" -+ func_fatal_help "you must specify a MODE" -+} -+ -+test -z "$exec_cmd" && \ -+ func_fatal_help "invalid operation mode \`$mode'" - - if test -n "$exec_cmd"; then -- eval exec $exec_cmd -+ eval exec "$exec_cmd" - exit $EXIT_FAILURE - fi - --# We need to display help for each of the modes. --case $mode in --"") $echo \ --"Usage: $modename [OPTION]... [MODE-ARG]... -- --Provide generalized library-building support services. -- -- --config show all configuration variables -- --debug enable verbose shell tracing ---n, --dry-run display commands without modifying any files -- --features display basic configuration information and exit -- --finish same as \`--mode=finish' -- --help display this help message and exit -- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] -- --quiet same as \`--silent' -- --silent don't print informational messages -- --tag=TAG use configuration variables from tag TAG -- --version print version information -- --MODE must be one of the following: -- -- clean remove files from the build directory -- compile compile a source file into a libtool object -- execute automatically set library path, then run a program -- finish complete the installation of libtool libraries -- install install libraries or executables -- link create a library or an executable -- uninstall remove libraries from an installed directory -- --MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for --a more detailed description of MODE. -- --Report bugs to ." -- exit $EXIT_SUCCESS -- ;; -- --clean) -- $echo \ --"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... -- --Remove files from the build directory. -- --RM is the name of the program to use to delete files associated with each FILE --(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed --to RM. -- --If FILE is a libtool library, object or program, all the files associated --with it are deleted. Otherwise, only FILE itself is deleted using RM." -- ;; -- --compile) -- $echo \ --"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE -- --Compile a source file into a libtool library object. -- --This mode accepts the following additional options: -- -- -o OUTPUT-FILE set the output file name to OUTPUT-FILE -- -prefer-pic try to building PIC objects only -- -prefer-non-pic try to building non-PIC objects only -- -static always build a \`.o' file suitable for static linking -- --COMPILE-COMMAND is a command to be used in creating a \`standard' object file --from the given SOURCEFILE. -- --The output file name is determined by removing the directory component from --SOURCEFILE, then substituting the C source code suffix \`.c' with the --library object suffix, \`.lo'." -- ;; -- --execute) -- $echo \ --"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... -- --Automatically set library path, then run a program. -- --This mode accepts the following additional options: -- -- -dlopen FILE add the directory containing FILE to the library path -- --This mode sets the library path environment variable according to \`-dlopen' --flags. -- --If any of the ARGS are libtool executable wrappers, then they are translated --into their corresponding uninstalled binary, and any of their required library --directories are added to the library path. -- --Then, COMMAND is executed, with ARGS as arguments." -- ;; -- --finish) -- $echo \ --"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... -- --Complete the installation of libtool libraries. -- --Each LIBDIR is a directory that contains libtool libraries. -- --The commands that this mode executes may require superuser privileges. Use --the \`--dry-run' option if you just want to see what would be executed." -- ;; -- --install) -- $echo \ --"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... -- --Install executables or libraries. -- --INSTALL-COMMAND is the installation command. The first component should be --either the \`install' or \`cp' program. -- --The rest of the components are interpreted as arguments to that command (only --BSD-compatible install options are recognized)." -- ;; -- --link) -- $echo \ --"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... -- --Link object files or libraries together to form another library, or to --create an executable program. -- --LINK-COMMAND is a command using the C compiler that you would use to create --a program from several object files. -- --The following components of LINK-COMMAND are treated specially: -- -- -all-static do not do any dynamic linking at all -- -avoid-version do not add a version suffix if possible -- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -- -export-symbols SYMFILE -- try to export only the symbols listed in SYMFILE -- -export-symbols-regex REGEX -- try to export only the symbols matching REGEX -- -LLIBDIR search LIBDIR for required installed libraries -- -lNAME OUTPUT-FILE requires the installed library libNAME -- -module build a library that can dlopened -- -no-fast-install disable the fast-install mode -- -no-install link a not-installable executable -- -no-undefined declare that a library does not refer to external symbols -- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -- -objectlist FILE Use a list of object files found in FILE to specify objects -- -precious-files-regex REGEX -- don't remove output files matching REGEX -- -release RELEASE specify package release information -- -rpath LIBDIR the created library will eventually be installed in LIBDIR -- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -- -static do not do any dynamic linking of libtool libraries -- -version-info CURRENT[:REVISION[:AGE]] -- specify library version info [each variable defaults to 0] -- --All other options (arguments beginning with \`-') are ignored. -- --Every other argument is treated as a filename. Files ending in \`.la' are --treated as uninstalled libtool libraries, other files are standard or library --object files. -- --If the OUTPUT-FILE ends in \`.la', then a libtool library is created, --only library objects (\`.lo' files) may be specified, and \`-rpath' is --required, except when creating a convenience library. -- --If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created --using \`ar' and \`ranlib', or on Windows using \`lib'. -- --If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file --is created, otherwise an executable program is created." -- ;; -- --uninstall) -- $echo \ --"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... -- --Remove libraries from an installation directory. -- --RM is the name of the program to use to delete files associated with each FILE --(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed --to RM. -+exit $exit_status - --If FILE is a libtool library, all the files associated with it are deleted. --Otherwise, only FILE itself is deleted using RM." -- ;; -- --*) -- $echo "$modename: invalid operation mode \`$mode'" 1>&2 -- $echo "$help" 1>&2 -- exit $EXIT_FAILURE -- ;; --esac -- --$echo --$echo "Try \`$modename --help' for more information about other modes." -- --exit $EXIT_SUCCESS - - # The TAGs below are defined such that we never get into a situation - # in which we disable both kinds of libraries. Given conflicting -@@ -6416,10 +8402,12 @@ build_old_libs=yes - # ### END LIBTOOL TAG CONFIG: disable-shared - - # ### BEGIN LIBTOOL TAG CONFIG: disable-static --build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac` -+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` - # ### END LIBTOOL TAG CONFIG: disable-static - - # Local Variables: - # mode:shell-script - # sh-indentation:2 - # End: -+# vi:sw=2 -+ ---- raidutils-0.0.6.orig/config.sub -+++ raidutils-0.0.6/config.sub -@@ -1,9 +1,10 @@ - #! /bin/sh - # Configuration validation subroutine script. - # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, --# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. -+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 -+# Free Software Foundation, Inc. - --timestamp='2003-06-18' -+timestamp='2010-01-22' - - # This file is (in principle) common to ALL GNU software. - # The presence of a machine in this file suggests that SOME GNU software -@@ -21,22 +22,26 @@ timestamp='2003-06-18' - # - # You should have received a copy of the GNU General Public License - # along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, --# Boston, MA 02111-1307, USA. -- -+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -+# 02110-1301, USA. -+# - # As a special exception to the GNU General Public License, if you - # distribute this file as part of a program that contains a - # configuration script generated by Autoconf, you may include it under - # the same distribution terms that you use for the rest of that program. - -+ - # Please send patches to . Submit a context --# diff and a properly formatted ChangeLog entry. -+# diff and a properly formatted GNU ChangeLog entry. - # - # Configuration subroutine to validate and canonicalize a configuration type. - # Supply the specified configuration type as an argument. - # If it is invalid, we print an error message on stderr and exit with code 1. - # Otherwise, we print the canonical config type on stdout and succeed. - -+# You can get the latest version of this script from: -+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD -+ - # This file is supposed to be the same for all GNU packages - # and recognize all the CPU types, system types and aliases - # that are meaningful with *any* GNU software. -@@ -70,8 +75,9 @@ Report bugs and patches to do not work properly. */ - #undef STAT_MACROS_BROKEN - -@@ -232,7 +239,7 @@ - /* Define to rpl_realloc if the replacement function should be used. */ - #undef realloc - --/* Define to `unsigned' if does not define. */ -+/* Define to `unsigned int' if does not define. */ - #undef size_t - - /* Define as `fork' if `vfork' does not work. */ ---- raidutils-0.0.6.orig/configure.in -+++ raidutils-0.0.6/configure.in -@@ -1,17 +1,18 @@ - # -*- Autoconf -*- - # Process this file with autoconf to produce a configure script. - --AC_PREREQ(2.59) --AC_INIT([I2O RAID Utilities], 0.0.6) -+AC_PREREQ([2.67]) -+AC_INIT([I2O RAID Utilities],[0.0.6]) - AC_CONFIG_SRCDIR([config.h.in]) --AM_CONFIG_HEADER([config.h]) -+AC_CONFIG_HEADERS([config.h]) -+AC_CONFIG_MACRO_DIR([m4]) - AM_INIT_AUTOMAKE - - # Checks for programs. - AC_PROG_CXX - AC_PROG_CC - AC_PROG_CPP --AC_PROG_LIBTOOL -+LT_INIT - - # Checks for libraries. - -@@ -42,11 +43,13 @@ AC_PROG_GCC_TRADITIONAL - AC_FUNC_MALLOC - AC_FUNC_MEMCMP - AC_FUNC_REALLOC --AC_TYPE_SIGNAL -+ - AC_FUNC_STAT - AC_FUNC_VPRINTF - AC_CHECK_FUNCS([alarm atexit dup2 memset strchr strcspn strpbrk strrchr strspn strstr strtol strtoul sysinfo uname]) - -+AM_PROG_CC_C_O -+ - AC_CONFIG_FILES([Makefile - raideng/Makefile - raidutil/Makefile ---- raidutils-0.0.6.orig/aclocal.m4 -+++ raidutils-0.0.6/aclocal.m4 -@@ -1,7 +1,7 @@ --# generated automatically by aclocal 1.9.2 -*- Autoconf -*- -+# generated automatically by aclocal 1.11.1 -*- Autoconf -*- - --# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 --# Free Software Foundation, Inc. -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. - # This file is free software; the Free Software Foundation - # gives unlimited permission to copy and/or distribute it, - # with or without modifications, as long as this notice is preserved. -@@ -11,103 +11,196 @@ - # even the implied warranty of MERCHANTABILITY or FITNESS FOR A - # PARTICULAR PURPOSE. - -+m4_ifndef([AC_AUTOCONF_VERSION], -+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],, -+[m4_warning([this file was generated for autoconf 2.67. -+You have another version of autoconf. It may work, but is not guaranteed to. -+If you have problems, you may need to regenerate the build system entirely. -+To do so, use the procedure documented by the package, typically `autoreconf'.])]) -+ - # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -+# -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -+# 2006, 2007, 2008 Free Software Foundation, Inc. -+# Written by Gordon Matzigkeit, 1996 -+# -+# This file is free software; the Free Software Foundation gives -+# unlimited permission to copy and/or distribute it, with or without -+# modifications, as long as this notice is preserved. -+ -+m4_define([_LT_COPYING], [dnl -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -+# 2006, 2007, 2008 Free Software Foundation, Inc. -+# Written by Gordon Matzigkeit, 1996 -+# -+# This file is part of GNU Libtool. -+# -+# GNU Libtool is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# As a special exception to the GNU General Public License, -+# if you distribute this file as part of a program or library that -+# is built using GNU Libtool, you may include this file under the -+# same distribution terms that you use for the rest of that program. -+# -+# GNU Libtool is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with GNU Libtool; see the file COPYING. If not, a copy -+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -+# obtained by writing to the Free Software Foundation, Inc., -+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+]) - --# serial 47 AC_PROG_LIBTOOL -+# serial 56 LT_INIT - - --# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) --# ----------------------------------------------------------- --# If this macro is not defined by Autoconf, define it here. --m4_ifdef([AC_PROVIDE_IFELSE], -- [], -- [m4_define([AC_PROVIDE_IFELSE], -- [m4_ifdef([AC_PROVIDE_$1], -- [$2], [$3])])]) -+# LT_PREREQ(VERSION) -+# ------------------ -+# Complain and exit if this libtool version is less that VERSION. -+m4_defun([LT_PREREQ], -+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, -+ [m4_default([$3], -+ [m4_fatal([Libtool version $1 or higher is required], -+ 63)])], -+ [$2])]) - - --# AC_PROG_LIBTOOL --# --------------- --AC_DEFUN([AC_PROG_LIBTOOL], --[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl --dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX --dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. -- AC_PROVIDE_IFELSE([AC_PROG_CXX], -- [AC_LIBTOOL_CXX], -- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX -- ])]) --dnl And a similar setup for Fortran 77 support -- AC_PROVIDE_IFELSE([AC_PROG_F77], -- [AC_LIBTOOL_F77], -- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 --])]) -- --dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. --dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run --dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. -- AC_PROVIDE_IFELSE([AC_PROG_GCJ], -- [AC_LIBTOOL_GCJ], -- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], -- [AC_LIBTOOL_GCJ], -- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], -- [AC_LIBTOOL_GCJ], -- [ifdef([AC_PROG_GCJ], -- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) -- ifdef([A][M_PROG_GCJ], -- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) -- ifdef([LT_AC_PROG_GCJ], -- [define([LT_AC_PROG_GCJ], -- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) --])])# AC_PROG_LIBTOOL -+# _LT_CHECK_BUILDDIR -+# ------------------ -+# Complain if the absolute build directory name contains unusual characters -+m4_defun([_LT_CHECK_BUILDDIR], -+[case `pwd` in -+ *\ * | *\ *) -+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; -+esac -+]) - - --# _AC_PROG_LIBTOOL --# ---------------- --AC_DEFUN([_AC_PROG_LIBTOOL], --[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl --AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl --AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl --AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl -+# LT_INIT([OPTIONS]) -+# ------------------ -+AC_DEFUN([LT_INIT], -+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -+AC_BEFORE([$0], [LT_LANG])dnl -+AC_BEFORE([$0], [LT_OUTPUT])dnl -+AC_BEFORE([$0], [LTDL_INIT])dnl -+m4_require([_LT_CHECK_BUILDDIR])dnl -+ -+dnl Autoconf doesn't catch unexpanded LT_ macros by default: -+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl -+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl -+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 -+dnl unless we require an AC_DEFUNed macro: -+AC_REQUIRE([LTOPTIONS_VERSION])dnl -+AC_REQUIRE([LTSUGAR_VERSION])dnl -+AC_REQUIRE([LTVERSION_VERSION])dnl -+AC_REQUIRE([LTOBSOLETE_VERSION])dnl -+m4_require([_LT_PROG_LTMAIN])dnl -+ -+dnl Parse OPTIONS -+_LT_SET_OPTIONS([$0], [$1]) - - # This can be used to rebuild libtool when needed --LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" -+LIBTOOL_DEPS="$ltmain" - - # Always use our own libtool. - LIBTOOL='$(SHELL) $(top_builddir)/libtool' - AC_SUBST(LIBTOOL)dnl - --# Prevent multiple expansion --define([AC_PROG_LIBTOOL], []) --])# _AC_PROG_LIBTOOL -+_LT_SETUP - -+# Only expand once: -+m4_define([LT_INIT]) -+])# LT_INIT - --# AC_LIBTOOL_SETUP --# ---------------- --AC_DEFUN([AC_LIBTOOL_SETUP], --[AC_PREREQ(2.50)dnl --AC_REQUIRE([AC_ENABLE_SHARED])dnl --AC_REQUIRE([AC_ENABLE_STATIC])dnl --AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl --AC_REQUIRE([AC_CANONICAL_HOST])dnl -+# Old names: -+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) -+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_PROG_LIBTOOL], []) -+dnl AC_DEFUN([AM_PROG_LIBTOOL], []) -+ -+ -+# _LT_CC_BASENAME(CC) -+# ------------------- -+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -+m4_defun([_LT_CC_BASENAME], -+[for cc_temp in $1""; do -+ case $cc_temp in -+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; -+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; -+ \-*) ;; -+ *) break;; -+ esac -+done -+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -+]) -+ -+ -+# _LT_FILEUTILS_DEFAULTS -+# ---------------------- -+# It is okay to use these file commands and assume they have been set -+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. -+m4_defun([_LT_FILEUTILS_DEFAULTS], -+[: ${CP="cp -f"} -+: ${MV="mv -f"} -+: ${RM="rm -f"} -+])# _LT_FILEUTILS_DEFAULTS -+ -+ -+# _LT_SETUP -+# --------- -+m4_defun([_LT_SETUP], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl - AC_REQUIRE([AC_CANONICAL_BUILD])dnl -+_LT_DECL([], [host_alias], [0], [The host system])dnl -+_LT_DECL([], [host], [0])dnl -+_LT_DECL([], [host_os], [0])dnl -+dnl -+_LT_DECL([], [build_alias], [0], [The build system])dnl -+_LT_DECL([], [build], [0])dnl -+_LT_DECL([], [build_os], [0])dnl -+dnl - AC_REQUIRE([AC_PROG_CC])dnl --AC_REQUIRE([AC_PROG_LD])dnl --AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl --AC_REQUIRE([AC_PROG_NM])dnl -- -+AC_REQUIRE([LT_PATH_LD])dnl -+AC_REQUIRE([LT_PATH_NM])dnl -+dnl - AC_REQUIRE([AC_PROG_LN_S])dnl --AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl --# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! --AC_REQUIRE([AC_OBJEXT])dnl --AC_REQUIRE([AC_EXEEXT])dnl -+test -z "$LN_S" && LN_S="ln -s" -+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl -+dnl -+AC_REQUIRE([LT_CMD_MAX_LEN])dnl -+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl -+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl - dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_CHECK_SHELL_FEATURES])dnl -+m4_require([_LT_CMD_RELOAD])dnl -+m4_require([_LT_CHECK_MAGIC_METHOD])dnl -+m4_require([_LT_CMD_OLD_ARCHIVE])dnl -+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -+ -+_LT_CONFIG_LIBTOOL_INIT([ -+# See if we are running on zsh, and set the options which allow our -+# commands through without removal of \ escapes INIT. -+if test -n "\${ZSH_VERSION+set}" ; then -+ setopt NO_GLOB_SUBST -+fi -+]) -+if test -n "${ZSH_VERSION+set}" ; then -+ setopt NO_GLOB_SUBST -+fi - --AC_LIBTOOL_SYS_MAX_CMD_LEN --AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE --AC_LIBTOOL_OBJDIR -+_LT_CHECK_OBJDIR - --AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl --_LT_AC_PROG_ECHO_BACKSLASH -+m4_require([_LT_TAG_COMPILER])dnl -+_LT_PROG_ECHO_BACKSLASH - - case $host_os in - aix3*) -@@ -123,5868 +216,7818 @@ esac - - # Sed substitution that helps us do robust quoting. It backslashifies - # metacharacters that are still active within double-quoted strings. --Xsed='sed -e s/^X//' --[sed_quote_subst='s/$[\\"\\`$\\\\]$/\\\1/g'] -+sed_quote_subst='s/$[["`$\\]]$/\\\1/g' - - # Same as above, but do not quote variable references. --[double_quote_subst='s/$[\\"\\`\\\\]$/\\\1/g'] -+double_quote_subst='s/$[["`\\]]$/\\\1/g' - - # Sed substitution to delay expansion of an escaped shell variable in a - # double_quote_subst'ed string. - delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -+# Sed substitution to delay expansion of an escaped single quote. -+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' -+ - # Sed substitution to avoid accidental globbing in evaled expressions - no_glob_subst='s/\*/\\\*/g' - --# Constants: --rm="rm -f" -- - # Global variables: --default_ofile=libtool -+ofile=libtool - can_build_shared=yes - --# All known linkers require a `.a' archive for static linking (except M$VC, -+# All known linkers require a `.a' archive for static linking (except MSVC, - # which needs '.lib'). - libext=a --ltmain="$ac_aux_dir/ltmain.sh" --ofile="$default_ofile" --with_gnu_ld="$lt_cv_prog_gnu_ld" - --AC_CHECK_TOOL(AR, ar, false) --AC_CHECK_TOOL(RANLIB, ranlib, :) --AC_CHECK_TOOL(STRIP, strip, :) -+with_gnu_ld="$lt_cv_prog_gnu_ld" - - old_CC="$CC" - old_CFLAGS="$CFLAGS" - - # Set sane defaults for various variables --test -z "$AR" && AR=ar --test -z "$AR_FLAGS" && AR_FLAGS=cru --test -z "$AS" && AS=as - test -z "$CC" && CC=cc - test -z "$LTCC" && LTCC=$CC --test -z "$DLLTOOL" && DLLTOOL=dlltool -+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS - test -z "$LD" && LD=ld --test -z "$LN_S" && LN_S="ln -s" --test -z "$MAGIC_CMD" && MAGIC_CMD=file --test -z "$NM" && NM=nm --test -z "$SED" && SED=sed --test -z "$OBJDUMP" && OBJDUMP=objdump --test -z "$RANLIB" && RANLIB=: --test -z "$STRIP" && STRIP=: - test -z "$ac_objext" && ac_objext=o - --# Determine commands to create old-style static archives. --old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' --old_postinstall_cmds='chmod 644 $oldlib' --old_postuninstall_cmds= -- --if test -n "$RANLIB"; then -- case $host_os in -- openbsd*) -- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" -- ;; -- *) -- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" -- ;; -- esac -- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" --fi -+_LT_CC_BASENAME([$compiler]) - - # Only perform the check for file, if the check method requires it -+test -z "$MAGIC_CMD" && MAGIC_CMD=file - case $deplibs_check_method in - file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then -- AC_PATH_MAGIC -+ _LT_PATH_MAGIC - fi - ;; - esac - --AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) --AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], --enable_win32_dll=yes, enable_win32_dll=no) -- --AC_ARG_ENABLE([libtool-lock], -- [AC_HELP_STRING([--disable-libtool-lock], -- [avoid locking (might break parallel builds)])]) --test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -+# Use C for the default configuration in the libtool script -+LT_SUPPORTED_TAG([CC]) -+_LT_LANG_C_CONFIG -+_LT_LANG_DEFAULT_CONFIG -+_LT_CONFIG_COMMANDS -+])# _LT_SETUP - --AC_ARG_WITH([pic], -- [AC_HELP_STRING([--with-pic], -- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], -- [pic_mode="$withval"], -- [pic_mode=default]) --test -z "$pic_mode" && pic_mode=default - --# Use C for the default configuration in the libtool script --tagname= --AC_LIBTOOL_LANG_C_CONFIG --_LT_AC_TAGCONFIG --])# AC_LIBTOOL_SETUP -+# _LT_PROG_LTMAIN -+# --------------- -+# Note that this code is called both from `configure', and `config.status' -+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -+# `config.status' has no value for ac_aux_dir unless we are using Automake, -+# so we pass a copy along to make sure it has a sensible value anyway. -+m4_defun([_LT_PROG_LTMAIN], -+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl -+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -+ltmain="$ac_aux_dir/ltmain.sh" -+])# _LT_PROG_LTMAIN - - --# _LT_AC_SYS_COMPILER --# ------------------- --AC_DEFUN([_LT_AC_SYS_COMPILER], --[AC_REQUIRE([AC_PROG_CC])dnl - --# If no C compiler was specified, use CC. --LTCC=${LTCC-"$CC"} -+# So that we can recreate a full libtool script including additional -+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -+# in macros and then make a single call at the end using the `libtool' -+# label. - --# Allow CC to be a program name with arguments. --compiler=$CC --])# _LT_AC_SYS_COMPILER - -+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) -+# ---------------------------------------- -+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. -+m4_define([_LT_CONFIG_LIBTOOL_INIT], -+[m4_ifval([$1], -+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT], -+ [$1 -+])])]) - --# _LT_AC_SYS_LIBPATH_AIX --# ---------------------- --# Links a minimal program and checks the executable --# for the system default hardcoded library path. In most cases, --# this is /usr/lib:/lib, but when the MPI compilers are used --# the location of the communication and MPI libs are included too. --# If we don't find anything, use the default library path according --# to the aix ld manual. --AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], --[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'`; fi],[]) --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi --])# _LT_AC_SYS_LIBPATH_AIX -+# Initialize. -+m4_define([_LT_OUTPUT_LIBTOOL_INIT]) - - --# _LT_AC_SHELL_INIT(ARG) --# ---------------------- --AC_DEFUN([_LT_AC_SHELL_INIT], --[ifdef([AC_DIVERSION_NOTICE], -- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], -- [AC_DIVERT_PUSH(NOTICE)]) --$1 --AC_DIVERT_POP --])# _LT_AC_SHELL_INIT -+# _LT_CONFIG_LIBTOOL([COMMANDS]) -+# ------------------------------ -+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. -+m4_define([_LT_CONFIG_LIBTOOL], -+[m4_ifval([$1], -+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], -+ [$1 -+])])]) -+ -+# Initialize. -+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) -+ -+ -+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) -+# ----------------------------------------------------- -+m4_defun([_LT_CONFIG_SAVE_COMMANDS], -+[_LT_CONFIG_LIBTOOL([$1]) -+_LT_CONFIG_LIBTOOL_INIT([$2]) -+]) - - --# _LT_AC_PROG_ECHO_BACKSLASH --# -------------------------- --# Add some code to the start of the generated configure script which --# will find an echo command which doesn't interpret backslashes. --AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], --[_LT_AC_SHELL_INIT([ --# Check that we are running under the correct shell. --SHELL=${CONFIG_SHELL-/bin/sh} -+# _LT_FORMAT_COMMENT([COMMENT]) -+# ----------------------------- -+# Add leading comment marks to the start of each line, and a trailing -+# full-stop to the whole comment if one is not present already. -+m4_define([_LT_FORMAT_COMMENT], -+[m4_ifval([$1], [ -+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], -+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) -+)]) - --case X$ECHO in --X*--fallback-echo) -- # Remove one level of quotation (which was required for Make). -- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` -- ;; --esac - --echo=${ECHO-echo} --if test "X[$]1" = X--no-reexec; then -- # Discard the --no-reexec flag, and continue. -- shift --elif test "X[$]1" = X--fallback-echo; then -- # Avoid inline document here, it may be left over -- : --elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then -- # Yippee, $echo works! -- : --else -- # Restart under the correct shell. -- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} --fi - --if test "X[$]1" = X--fallback-echo; then -- # used as fallback echo -- shift -- cat </dev/null && -- echo_test_string="`eval $cmd`" && -- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null -- then -- break -- fi -- done --fi -+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) -+# ------------------------------------------------------------------- -+# CONFIGNAME is the name given to the value in the libtool script. -+# VARNAME is the (base) name used in the configure script. -+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on -+# VARNAME. Any other value will be used directly. -+m4_define([_LT_DECL], -+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], -+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], -+ [m4_ifval([$1], [$1], [$2])]) -+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) -+ m4_ifval([$4], -+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) -+ lt_dict_add_subkey([lt_decl_dict], [$2], -+ [tagged?], [m4_ifval([$5], [yes], [no])])]) -+]) - --if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && -- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- : --else -- # The Solaris, AIX, and Digital Unix default echo programs unquote -- # backslashes. This makes it impossible to quote backslashes using -- # echo "$something" | sed 's/\\/\\\\/g' -- # -- # So, first we look for a working echo in the user's PATH. - -- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -- for dir in $PATH /usr/ucb; do -- IFS="$lt_save_ifs" -- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && -- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && -- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- echo="$dir/echo" -- break -- fi -- done -- IFS="$lt_save_ifs" -+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) -+# -------------------------------------------------------- -+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) -+ -+ -+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) -+# ------------------------------------------------ -+m4_define([lt_decl_tag_varnames], -+[_lt_decl_filter([tagged?], [yes], $@)]) -+ -+ -+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) -+# --------------------------------------------------------- -+m4_define([_lt_decl_filter], -+[m4_case([$#], -+ [0], [m4_fatal([$0: too few arguments: $#])], -+ [1], [m4_fatal([$0: too few arguments: $#: $1])], -+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], -+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], -+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl -+]) - -- if test "X$echo" = Xecho; then -- # We didn't find a better echo, so look for alternatives. -- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && -- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- # This shell has a builtin print -r that does the trick. -- echo='print -r' -- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && -- test "X$CONFIG_SHELL" != X/bin/ksh; then -- # If we have ksh, try running configure again with it. -- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} -- export ORIGINAL_CONFIG_SHELL -- CONFIG_SHELL=/bin/ksh -- export CONFIG_SHELL -- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} -- else -- # Try using printf. -- echo='printf %s\n' -- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && -- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- # Cool, printf works -- : -- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && -- test "X$echo_testing_string" = 'X\t' && -- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL -- export CONFIG_SHELL -- SHELL="$CONFIG_SHELL" -- export SHELL -- echo="$CONFIG_SHELL [$]0 --fallback-echo" -- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && -- test "X$echo_testing_string" = 'X\t' && -- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- echo="$CONFIG_SHELL [$]0 --fallback-echo" -- else -- # maybe with a smaller string... -- prev=: - -- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do -- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null -- then -- break -- fi -- prev="$cmd" -- done -+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) -+# -------------------------------------------------- -+m4_define([lt_decl_quote_varnames], -+[_lt_decl_filter([value], [1], $@)]) -+ -+ -+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) -+# --------------------------------------------------- -+m4_define([lt_decl_dquote_varnames], -+[_lt_decl_filter([value], [2], $@)]) -+ -+ -+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) -+# --------------------------------------------------- -+m4_define([lt_decl_varnames_tagged], -+[m4_assert([$# <= 2])dnl -+_$0(m4_quote(m4_default([$1], [[, ]])), -+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), -+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) -+m4_define([_lt_decl_varnames_tagged], -+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) -+ -+ -+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) -+# ------------------------------------------------ -+m4_define([lt_decl_all_varnames], -+[_$0(m4_quote(m4_default([$1], [[, ]])), -+ m4_if([$2], [], -+ m4_quote(lt_decl_varnames), -+ m4_quote(m4_shift($@))))[]dnl -+]) -+m4_define([_lt_decl_all_varnames], -+[lt_join($@, lt_decl_varnames_tagged([$1], -+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl -+]) - -- if test "$prev" != 'sed 50q "[$]0"'; then -- echo_test_string=`eval $prev` -- export echo_test_string -- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} -- else -- # Oops. We lost completely, so just stick with echo. -- echo=echo -- fi -- fi -- fi -- fi --fi --fi - --# Copy echo and quote the copy suitably for passing to libtool from --# the Makefile, instead of quoting the original, which is used later. --ECHO=$echo --if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then -- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" --fi -+# _LT_CONFIG_STATUS_DECLARE([VARNAME]) -+# ------------------------------------ -+# Quote a variable value, and forward it to `config.status' so that its -+# declaration there will have the same value as in `configure'. VARNAME -+# must have a single quote delimited value for this to work. -+m4_define([_LT_CONFIG_STATUS_DECLARE], -+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) - --AC_SUBST(ECHO) --])])# _LT_AC_PROG_ECHO_BACKSLASH - -+# _LT_CONFIG_STATUS_DECLARATIONS -+# ------------------------------ -+# We delimit libtool config variables with single quotes, so when -+# we write them to config.status, we have to be sure to quote all -+# embedded single quotes properly. In configure, this macro expands -+# each variable declared with _LT_DECL (and _LT_TAGDECL) into: -+# -+# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' -+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], -+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), -+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) - --# _LT_AC_LOCK --# ----------- --AC_DEFUN([_LT_AC_LOCK], --[AC_ARG_ENABLE([libtool-lock], -- [AC_HELP_STRING([--disable-libtool-lock], -- [avoid locking (might break parallel builds)])]) --test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - --# Some flags need to be propagated to the compiler or linker for good --# libtool support. --case $host in --ia64-*-hpux*) -- # Find out which ABI we are using. -- echo 'int i;' > conftest.$ac_ext -- if AC_TRY_EVAL(ac_compile); then -- case `/usr/bin/file conftest.$ac_objext` in -- *ELF-32*) -- HPUX_IA64_MODE="32" -- ;; -- *ELF-64*) -- HPUX_IA64_MODE="64" -- ;; -- esac -- fi -- rm -rf conftest* -- ;; --*-*-irix6*) -- # Find out which ABI we are using. -- echo '[#]line __oline__ "configure"' > conftest.$ac_ext -- if AC_TRY_EVAL(ac_compile); then -- if test "$lt_cv_prog_gnu_ld" = yes; then -- case `/usr/bin/file conftest.$ac_objext` in -- *32-bit*) -- LD="${LD-ld} -melf32bsmip" -- ;; -- *N32*) -- LD="${LD-ld} -melf32bmipn32" -- ;; -- *64-bit*) -- LD="${LD-ld} -melf64bmip" -- ;; -- esac -- else -- case `/usr/bin/file conftest.$ac_objext` in -- *32-bit*) -- LD="${LD-ld} -32" -- ;; -- *N32*) -- LD="${LD-ld} -n32" -+# _LT_LIBTOOL_TAGS -+# ---------------- -+# Output comment and list of tags supported by the script -+m4_defun([_LT_LIBTOOL_TAGS], -+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -+available_tags="_LT_TAGS"dnl -+]) -+ -+ -+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) -+# ----------------------------------- -+# Extract the dictionary values for VARNAME (optionally with TAG) and -+# expand to a commented shell variable setting: -+# -+# # Some comment about what VAR is for. -+# visible_name=$lt_internal_name -+m4_define([_LT_LIBTOOL_DECLARE], -+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], -+ [description])))[]dnl -+m4_pushdef([_libtool_name], -+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl -+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), -+ [0], [_libtool_name=[$]$1], -+ [1], [_libtool_name=$lt_[]$1], -+ [2], [_libtool_name=$lt_[]$1], -+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl -+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl -+]) -+ -+ -+# _LT_LIBTOOL_CONFIG_VARS -+# ----------------------- -+# Produce commented declarations of non-tagged libtool config variables -+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' -+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG -+# section) are produced by _LT_LIBTOOL_TAG_VARS. -+m4_defun([_LT_LIBTOOL_CONFIG_VARS], -+[m4_foreach([_lt_var], -+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), -+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) -+ -+ -+# _LT_LIBTOOL_TAG_VARS(TAG) -+# ------------------------- -+m4_define([_LT_LIBTOOL_TAG_VARS], -+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), -+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) -+ -+ -+# _LT_TAGVAR(VARNAME, [TAGNAME]) -+# ------------------------------ -+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) -+ -+ -+# _LT_CONFIG_COMMANDS -+# ------------------- -+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of -+# variables for single and double quote escaping we saved from calls -+# to _LT_DECL, we can put quote escaped variables declarations -+# into `config.status', and then the shell code to quote escape them in -+# for loops in `config.status'. Finally, any additional code accumulated -+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. -+m4_defun([_LT_CONFIG_COMMANDS], -+[AC_PROVIDE_IFELSE([LT_OUTPUT], -+ dnl If the libtool generation code has been placed in $CONFIG_LT, -+ dnl instead of duplicating it all over again into config.status, -+ dnl then we will have config.status run $CONFIG_LT later, so it -+ dnl needs to know what name is stored there: -+ [AC_CONFIG_COMMANDS([libtool], -+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], -+ dnl If the libtool generation code is destined for config.status, -+ dnl expand the accumulated commands and init code now: -+ [AC_CONFIG_COMMANDS([libtool], -+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) -+])#_LT_CONFIG_COMMANDS -+ -+ -+# Initialize. -+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], -+[ -+ -+# The HP-UX ksh and POSIX shell print the target directory to stdout -+# if CDPATH is set. -+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -+ -+sed_quote_subst='$sed_quote_subst' -+double_quote_subst='$double_quote_subst' -+delay_variable_subst='$delay_variable_subst' -+_LT_CONFIG_STATUS_DECLARATIONS -+LTCC='$LTCC' -+LTCFLAGS='$LTCFLAGS' -+compiler='$compiler_DEFAULT' -+ -+# Quote evaled strings. -+for var in lt_decl_all_varnames([[ \ -+]], lt_decl_quote_varnames); do -+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in -+ *[[\\\\\\\`\\"\\\$]]*) -+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; -- *64-bit*) -- LD="${LD-ld} -64" -+ *) -+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -- fi -- fi -- rm -rf conftest* -- ;; -+done - --x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) -- # Find out which ABI we are using. -- echo 'int i;' > conftest.$ac_ext -- if AC_TRY_EVAL(ac_compile); then -- case "`/usr/bin/file conftest.o`" in -- *32-bit*) -- case $host in -- x86_64-*linux*) -- LD="${LD-ld} -m elf_i386" -- ;; -- ppc64-*linux*|powerpc64-*linux*) -- LD="${LD-ld} -m elf32ppclinux" -- ;; -- s390x-*linux*) -- LD="${LD-ld} -m elf_s390" -- ;; -- sparc64-*linux*) -- LD="${LD-ld} -m elf32_sparc" -- ;; -- esac -+# Double-quote double-evaled strings. -+for var in lt_decl_all_varnames([[ \ -+]], lt_decl_dquote_varnames); do -+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in -+ *[[\\\\\\\`\\"\\\$]]*) -+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; -- *64-bit*) -- case $host in -- x86_64-*linux*) -- LD="${LD-ld} -m elf_x86_64" -- ;; -- ppc*-*linux*|powerpc*-*linux*) -- LD="${LD-ld} -m elf64ppc" -- ;; -- s390*-*linux*) -- LD="${LD-ld} -m elf64_s390" -- ;; -- sparc*-*linux*) -- LD="${LD-ld} -m elf64_sparc" -- ;; -- esac -+ *) -+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -- fi -- rm -rf conftest* -+done -+ -+# Fix-up fallback echo if it was mangled by the above quoting rules. -+case \$lt_ECHO in -+*'\\\[$]0 --fallback-echo"')dnl " -+ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` - ;; -+esac - --*-*-sco3.2v5*) -- # On SCO OpenServer 5, we need -belf to get full-featured binaries. -- SAVE_CFLAGS="$CFLAGS" -- CFLAGS="$CFLAGS -belf" -- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, -- [AC_LANG_PUSH(C) -- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) -- AC_LANG_POP]) -- if test x"$lt_cv_cc_needs_belf" != x"yes"; then -- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf -- CFLAGS="$SAVE_CFLAGS" -- fi -- ;; --AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], --[*-*-cygwin* | *-*-mingw* | *-*-pw32*) -- AC_CHECK_TOOL(DLLTOOL, dlltool, false) -- AC_CHECK_TOOL(AS, as, false) -- AC_CHECK_TOOL(OBJDUMP, objdump, false) -- ;; -- ]) --esac -+_LT_OUTPUT_LIBTOOL_INIT -+]) - --need_locks="$enable_libtool_lock" - --])# _LT_AC_LOCK -+# LT_OUTPUT -+# --------- -+# This macro allows early generation of the libtool script (before -+# AC_OUTPUT is called), incase it is used in configure for compilation -+# tests. -+AC_DEFUN([LT_OUTPUT], -+[: ${CONFIG_LT=./config.lt} -+AC_MSG_NOTICE([creating $CONFIG_LT]) -+cat >"$CONFIG_LT" <<_LTEOF -+#! $SHELL -+# Generated by $as_me. -+# Run this file to recreate a libtool stub with the current configuration. -+ -+lt_cl_silent=false -+SHELL=\${CONFIG_SHELL-$SHELL} -+_LTEOF -+ -+cat >>"$CONFIG_LT" <<\_LTEOF -+AS_SHELL_SANITIZE -+_AS_PREPARE - -+exec AS_MESSAGE_FD>&1 -+exec AS_MESSAGE_LOG_FD>>config.log -+{ -+ echo -+ AS_BOX([Running $as_me.]) -+} >&AS_MESSAGE_LOG_FD -+ -+lt_cl_help="\ -+\`$as_me' creates a local libtool stub from the current configuration, -+for use in further configure time tests before the real libtool is -+generated. -+ -+Usage: $[0] [[OPTIONS]] -+ -+ -h, --help print this help, then exit -+ -V, --version print version number, then exit -+ -q, --quiet do not print progress messages -+ -d, --debug don't remove temporary files -+ -+Report bugs to ." -+ -+lt_cl_version="\ -+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl -+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) -+configured by $[0], generated by m4_PACKAGE_STRING. -+ -+Copyright (C) 2008 Free Software Foundation, Inc. -+This config.lt script is free software; the Free Software Foundation -+gives unlimited permision to copy, distribute and modify it." - --# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, --# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) --# ---------------------------------------------------------------- --# Check whether the given compiler option works --AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], --[AC_REQUIRE([LT_AC_PROG_SED]) --AC_CACHE_CHECK([$1], [$2], -- [$2=no -- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -- lt_compiler_flag="$3" -- # Insert the option either (1) after the last *FLAGS variable, or -- # (2) before a word containing "conftest.", or (3) at the end. -- # Note that $ac_compile itself does not contain backslashes and begins -- # with a dollar sign (not a hyphen), so the echo should work correctly. -- # The option is referenced via a variable to avoid confusing sed. -- lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -- -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) -- (eval "$lt_compile" 2>conftest.err) -- ac_status=$? -- cat conftest.err >&AS_MESSAGE_LOG_FD -- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD -- if (exit $ac_status) && test -s "$ac_outfile"; then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s conftest.err; then -- $2=yes -- fi -- fi -- $rm conftest* --]) -+while test $[#] != 0 -+do -+ case $[1] in -+ --version | --v* | -V ) -+ echo "$lt_cl_version"; exit 0 ;; -+ --help | --h* | -h ) -+ echo "$lt_cl_help"; exit 0 ;; -+ --debug | --d* | -d ) -+ debug=: ;; -+ --quiet | --q* | --silent | --s* | -q ) -+ lt_cl_silent=: ;; - --if test x"[$]$2" = xyes; then -- ifelse([$5], , :, [$5]) --else -- ifelse([$6], , :, [$6]) --fi --])# AC_LIBTOOL_COMPILER_OPTION -+ -*) AC_MSG_ERROR([unrecognized option: $[1] -+Try \`$[0] --help' for more information.]) ;; - -+ *) AC_MSG_ERROR([unrecognized argument: $[1] -+Try \`$[0] --help' for more information.]) ;; -+ esac -+ shift -+done - --# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, --# [ACTION-SUCCESS], [ACTION-FAILURE]) --# ------------------------------------------------------------ --# Check whether the given compiler option works --AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], --[AC_CACHE_CHECK([$1], [$2], -- [$2=no -- save_LDFLAGS="$LDFLAGS" -- LDFLAGS="$LDFLAGS $3" -- printf "$lt_simple_link_test_code" > conftest.$ac_ext -- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test -s conftest.err; then -- # Append any errors to the config.log. -- cat conftest.err 1>&AS_MESSAGE_LOG_FD -- else -- $2=yes -- fi -- fi -- $rm conftest* -- LDFLAGS="$save_LDFLAGS" --]) -+if $lt_cl_silent; then -+ exec AS_MESSAGE_FD>/dev/null -+fi -+_LTEOF - --if test x"[$]$2" = xyes; then -- ifelse([$4], , :, [$4]) --else -- ifelse([$5], , :, [$5]) -+cat >>"$CONFIG_LT" <<_LTEOF -+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT -+_LTEOF -+ -+cat >>"$CONFIG_LT" <<\_LTEOF -+AC_MSG_NOTICE([creating $ofile]) -+_LT_OUTPUT_LIBTOOL_COMMANDS -+AS_EXIT(0) -+_LTEOF -+chmod +x "$CONFIG_LT" -+ -+# configure is writing to config.log, but config.lt does its own redirection, -+# appending to config.log, which fails on DOS, as config.log is still kept -+# open by configure. Here we exec the FD to /dev/null, effectively closing -+# config.log, so it can be properly (re)opened and appended to by config.lt. -+if test "$no_create" != yes; then -+ lt_cl_success=: -+ test "$silent" = yes && -+ lt_config_lt_args="$lt_config_lt_args --quiet" -+ exec AS_MESSAGE_LOG_FD>/dev/null -+ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -+ exec AS_MESSAGE_LOG_FD>>config.log -+ $lt_cl_success || AS_EXIT(1) - fi --])# AC_LIBTOOL_LINKER_OPTION -+])# LT_OUTPUT - - --# AC_LIBTOOL_SYS_MAX_CMD_LEN --# -------------------------- --AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], --[# find the maximum length of command line arguments --AC_MSG_CHECKING([the maximum length of command line arguments]) --AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl -- i=0 -- teststring="ABCD" -+# _LT_CONFIG(TAG) -+# --------------- -+# If TAG is the built-in tag, create an initial libtool script with a -+# default configuration from the untagged config vars. Otherwise add code -+# to config.status for appending the configuration named by TAG from the -+# matching tagged config vars. -+m4_defun([_LT_CONFIG], -+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+_LT_CONFIG_SAVE_COMMANDS([ -+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl -+ m4_if(_LT_TAG, [C], [ -+ # See if we are running on zsh, and set the options which allow our -+ # commands through without removal of \ escapes. -+ if test -n "${ZSH_VERSION+set}" ; then -+ setopt NO_GLOB_SUBST -+ fi - -- case $build_os in -- msdosdjgpp*) -- # On DJGPP, this test can blow up pretty badly due to problems in libc -- # (any single argument exceeding 2000 bytes causes a buffer overrun -- # during glob expansion). Even if it were fixed, the result of this -- # check would be larger than it should be. -- lt_cv_sys_max_cmd_len=12288; # 12K is about right -- ;; -+ cfgfile="${ofile}T" -+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 -+ $RM "$cfgfile" - -- gnu*) -- # Under GNU Hurd, this test is not required because there is -- # no limit to the length of command line arguments. -- # Libtool will interpret -1 as no limit whatsoever -- lt_cv_sys_max_cmd_len=-1; -- ;; -+ cat <<_LT_EOF >> "$cfgfile" -+#! $SHELL - -- cygwin* | mingw*) -- # On Win9x/ME, this test blows up -- it succeeds, but takes -- # about 5 minutes as the teststring grows exponentially. -- # Worse, since 9x/ME are not pre-emptively multitasking, -- # you end up with a "frozen" computer, even though with patience -- # the test eventually succeeds (with a max line length of 256k). -- # Instead, let's just punt: use the minimum linelength reported by -- # all of the supported platforms: 8192 (on NT/2K/XP). -- lt_cv_sys_max_cmd_len=8192; -- ;; -+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -+# NOTE: Changes made to this file will be lost: look at ltmain.sh. -+# -+_LT_COPYING -+_LT_LIBTOOL_TAGS - -- amigaos*) -- # On AmigaOS with pdksh, this test takes hours, literally. -- # So we just punt and use a minimum line length of 8192. -- lt_cv_sys_max_cmd_len=8192; -- ;; -+# ### BEGIN LIBTOOL CONFIG -+_LT_LIBTOOL_CONFIG_VARS -+_LT_LIBTOOL_TAG_VARS -+# ### END LIBTOOL CONFIG - -- *) -- # If test is not a shell built-in, we'll probably end up computing a -- # maximum length that is only half of the actual maximum length, but -- # we can't tell. -- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ -- = "XX$teststring") >/dev/null 2>&1 && -- new_result=`expr "X$teststring" : ".*" 2>&1` && -- lt_cv_sys_max_cmd_len=$new_result && -- test $i != 17 # 1/2 MB should be enough -- do -- i=`expr $i + 1` -- teststring=$teststring$teststring -- done -- teststring= -- # Add a significant safety factor because C++ compilers can tack on massive -- # amounts of additional arguments before passing them to the linker. -- # It appears as though 1/2 is a usable value. -- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` -+_LT_EOF -+ -+ case $host_os in -+ aix3*) -+ cat <<\_LT_EOF >> "$cfgfile" -+# AIX sometimes has problems with the GCC collect2 program. For some -+# reason, if we set the COLLECT_NAMES environment variable, the problems -+# vanish in a puff of smoke. -+if test "X${COLLECT_NAMES+set}" != Xset; then -+ COLLECT_NAMES= -+ export COLLECT_NAMES -+fi -+_LT_EOF - ;; - esac --]) --if test -n $lt_cv_sys_max_cmd_len ; then -- AC_MSG_RESULT($lt_cv_sys_max_cmd_len) --else -- AC_MSG_RESULT(none) --fi --])# AC_LIBTOOL_SYS_MAX_CMD_LEN - -+ _LT_PROG_LTMAIN - --# _LT_AC_CHECK_DLFCN --# -------------------- --AC_DEFUN([_LT_AC_CHECK_DLFCN], --[AC_CHECK_HEADERS(dlfcn.h)dnl --])# _LT_AC_CHECK_DLFCN -+ # We use sed instead of cat because bash on DJGPP gets confused if -+ # if finds mixed CR/LF and LF-only lines. Since sed operates in -+ # text mode, it properly converts lines to CR/LF. This bash problem -+ # is reportedly fixed, but why not run on old versions too? -+ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ -+ || (rm -f "$cfgfile"; exit 1) - -+ _LT_PROG_XSI_SHELLFNS - --# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, --# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) --# ------------------------------------------------------------------ --AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], --[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl --if test "$cross_compiling" = yes; then : -- [$4] --else -- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 -- lt_status=$lt_dlunknown -- cat > conftest.$ac_ext <> "$cfgfile" \ -+ || (rm -f "$cfgfile"; exit 1) - --#if HAVE_DLFCN_H --#include --#endif -+ mv -f "$cfgfile" "$ofile" || -+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") -+ chmod +x "$ofile" -+], -+[cat <<_LT_EOF >> "$ofile" - --#include -+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded -+dnl in a comment (ie after a #). -+# ### BEGIN LIBTOOL TAG CONFIG: $1 -+_LT_LIBTOOL_TAG_VARS(_LT_TAG) -+# ### END LIBTOOL TAG CONFIG: $1 -+_LT_EOF -+])dnl /m4_if -+], -+[m4_if([$1], [], [ -+ PACKAGE='$PACKAGE' -+ VERSION='$VERSION' -+ TIMESTAMP='$TIMESTAMP' -+ RM='$RM' -+ ofile='$ofile'], []) -+])dnl /_LT_CONFIG_SAVE_COMMANDS -+])# _LT_CONFIG -+ -+ -+# LT_SUPPORTED_TAG(TAG) -+# --------------------- -+# Trace this macro to discover what tags are supported by the libtool -+# --tag option, using: -+# autoconf --trace 'LT_SUPPORTED_TAG:$1' -+AC_DEFUN([LT_SUPPORTED_TAG], []) -+ -+ -+# C support is built-in for now -+m4_define([_LT_LANG_C_enabled], []) -+m4_define([_LT_TAGS], []) - --#ifdef RTLD_GLOBAL --# define LT_DLGLOBAL RTLD_GLOBAL --#else --# ifdef DL_GLOBAL --# define LT_DLGLOBAL DL_GLOBAL --# else --# define LT_DLGLOBAL 0 --# endif --#endif - --/* We may have to define LT_DLLAZY_OR_NOW in the command line if we -- find out it does not work in some platform. */ --#ifndef LT_DLLAZY_OR_NOW --# ifdef RTLD_LAZY --# define LT_DLLAZY_OR_NOW RTLD_LAZY --# else --# ifdef DL_LAZY --# define LT_DLLAZY_OR_NOW DL_LAZY --# else --# ifdef RTLD_NOW --# define LT_DLLAZY_OR_NOW RTLD_NOW --# else --# ifdef DL_NOW --# define LT_DLLAZY_OR_NOW DL_NOW --# else --# define LT_DLLAZY_OR_NOW 0 --# endif --# endif --# endif --# endif --#endif -+# LT_LANG(LANG) -+# ------------- -+# Enable libtool support for the given language if not already enabled. -+AC_DEFUN([LT_LANG], -+[AC_BEFORE([$0], [LT_OUTPUT])dnl -+m4_case([$1], -+ [C], [_LT_LANG(C)], -+ [C++], [_LT_LANG(CXX)], -+ [Java], [_LT_LANG(GCJ)], -+ [Fortran 77], [_LT_LANG(F77)], -+ [Fortran], [_LT_LANG(FC)], -+ [Windows Resource], [_LT_LANG(RC)], -+ [m4_ifdef([_LT_LANG_]$1[_CONFIG], -+ [_LT_LANG($1)], -+ [m4_fatal([$0: unsupported language: "$1"])])])dnl -+])# LT_LANG - --#ifdef __cplusplus --extern "C" void exit (int); --#endif - --void fnord() { int i=42;} --int main () --{ -- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -- int status = $lt_dlunknown; -+# _LT_LANG(LANGNAME) -+# ------------------ -+m4_defun([_LT_LANG], -+[m4_ifdef([_LT_LANG_]$1[_enabled], [], -+ [LT_SUPPORTED_TAG([$1])dnl -+ m4_append([_LT_TAGS], [$1 ])dnl -+ m4_define([_LT_LANG_]$1[_enabled], [])dnl -+ _LT_LANG_$1_CONFIG($1)])dnl -+])# _LT_LANG - -- if (self) -- { -- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -- /* dlclose (self); */ -- } - -- exit (status); --}] --EOF -- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then -- (./conftest; exit; ) 2>/dev/null -- lt_status=$? -- case x$lt_status in -- x$lt_dlno_uscore) $1 ;; -- x$lt_dlneed_uscore) $2 ;; -- x$lt_unknown|x*) $3 ;; -- esac -- else : -- # compilation failed -- $3 -- fi --fi --rm -fr conftest* --])# _LT_AC_TRY_DLOPEN_SELF -+# _LT_LANG_DEFAULT_CONFIG -+# ----------------------- -+m4_defun([_LT_LANG_DEFAULT_CONFIG], -+[AC_PROVIDE_IFELSE([AC_PROG_CXX], -+ [LT_LANG(CXX)], -+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) -+ -+AC_PROVIDE_IFELSE([AC_PROG_F77], -+ [LT_LANG(F77)], -+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) -+ -+AC_PROVIDE_IFELSE([AC_PROG_FC], -+ [LT_LANG(FC)], -+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) -+ -+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal -+dnl pulling things in needlessly. -+AC_PROVIDE_IFELSE([AC_PROG_GCJ], -+ [LT_LANG(GCJ)], -+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], -+ [LT_LANG(GCJ)], -+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ], -+ [LT_LANG(GCJ)], -+ [m4_ifdef([AC_PROG_GCJ], -+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) -+ m4_ifdef([A][M_PROG_GCJ], -+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) -+ m4_ifdef([LT_PROG_GCJ], -+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) -+ -+AC_PROVIDE_IFELSE([LT_PROG_RC], -+ [LT_LANG(RC)], -+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) -+])# _LT_LANG_DEFAULT_CONFIG -+ -+# Obsolete macros: -+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) -+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) -+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) -+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_CXX], []) -+dnl AC_DEFUN([AC_LIBTOOL_F77], []) -+dnl AC_DEFUN([AC_LIBTOOL_FC], []) -+dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) - - --# AC_LIBTOOL_DLOPEN_SELF --# ------------------- --AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], --[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl --if test "x$enable_dlopen" != xyes; then -- enable_dlopen=unknown -- enable_dlopen_self=unknown -- enable_dlopen_self_static=unknown --else -- lt_cv_dlopen=no -- lt_cv_dlopen_libs= -+# _LT_TAG_COMPILER -+# ---------------- -+m4_defun([_LT_TAG_COMPILER], -+[AC_REQUIRE([AC_PROG_CC])dnl - -- case $host_os in -- beos*) -- lt_cv_dlopen="load_add_on" -- lt_cv_dlopen_libs= -- lt_cv_dlopen_self=yes -- ;; -+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl -+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl -+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl -+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl - -- mingw* | pw32*) -- lt_cv_dlopen="LoadLibrary" -- lt_cv_dlopen_libs= -- ;; -+# If no C compiler was specified, use CC. -+LTCC=${LTCC-"$CC"} - -- cygwin*) -- lt_cv_dlopen="dlopen" -- lt_cv_dlopen_libs= -- ;; -+# If no C compiler flags were specified, use CFLAGS. -+LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -- darwin*) -- # if libdl is installed we need to link against it -- AC_CHECK_LIB([dl], [dlopen], -- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ -- lt_cv_dlopen="dyld" -- lt_cv_dlopen_libs= -- lt_cv_dlopen_self=yes -- ]) -- ;; -+# Allow CC to be a program name with arguments. -+compiler=$CC -+])# _LT_TAG_COMPILER - -- *) -- AC_CHECK_FUNC([shl_load], -- [lt_cv_dlopen="shl_load"], -- [AC_CHECK_LIB([dld], [shl_load], -- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], -- [AC_CHECK_FUNC([dlopen], -- [lt_cv_dlopen="dlopen"], -- [AC_CHECK_LIB([dl], [dlopen], -- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], -- [AC_CHECK_LIB([svld], [dlopen], -- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], -- [AC_CHECK_LIB([dld], [dld_link], -- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) -- ]) -- ]) -- ]) -- ]) -- ]) -- ;; -- esac - -- if test "x$lt_cv_dlopen" != xno; then -- enable_dlopen=yes -- else -- enable_dlopen=no -- fi -- -- case $lt_cv_dlopen in -- dlopen) -- save_CPPFLAGS="$CPPFLAGS" -- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" -- -- save_LDFLAGS="$LDFLAGS" -- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" -+# _LT_COMPILER_BOILERPLATE -+# ------------------------ -+# Check for compiler boilerplate output or warnings with -+# the simple compiler test code. -+m4_defun([_LT_COMPILER_BOILERPLATE], -+[m4_require([_LT_DECL_SED])dnl -+ac_outfile=conftest.$ac_objext -+echo "$lt_simple_compile_test_code" >conftest.$ac_ext -+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -+_lt_compiler_boilerplate=`cat conftest.err` -+$RM conftest* -+])# _LT_COMPILER_BOILERPLATE - -- save_LIBS="$LIBS" -- LIBS="$lt_cv_dlopen_libs $LIBS" - -- AC_CACHE_CHECK([whether a program can dlopen itself], -- lt_cv_dlopen_self, [dnl -- _LT_AC_TRY_DLOPEN_SELF( -- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, -- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) -+# _LT_LINKER_BOILERPLATE -+# ---------------------- -+# Check for linker boilerplate output or warnings with -+# the simple link test code. -+m4_defun([_LT_LINKER_BOILERPLATE], -+[m4_require([_LT_DECL_SED])dnl -+ac_outfile=conftest.$ac_objext -+echo "$lt_simple_link_test_code" >conftest.$ac_ext -+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -+_lt_linker_boilerplate=`cat conftest.err` -+$RM -r conftest* -+])# _LT_LINKER_BOILERPLATE -+ -+# _LT_REQUIRED_DARWIN_CHECKS -+# ------------------------- -+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ -+ case $host_os in -+ rhapsody* | darwin*) -+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) -+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) -+ AC_CHECK_TOOL([LIPO], [lipo], [:]) -+ AC_CHECK_TOOL([OTOOL], [otool], [:]) -+ AC_CHECK_TOOL([OTOOL64], [otool64], [:]) -+ _LT_DECL([], [DSYMUTIL], [1], -+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) -+ _LT_DECL([], [NMEDIT], [1], -+ [Tool to change global to local symbols on Mac OS X]) -+ _LT_DECL([], [LIPO], [1], -+ [Tool to manipulate fat objects and archives on Mac OS X]) -+ _LT_DECL([], [OTOOL], [1], -+ [ldd/readelf like tool for Mach-O binaries on Mac OS X]) -+ _LT_DECL([], [OTOOL64], [1], -+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) -+ -+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], -+ [lt_cv_apple_cc_single_mod=no -+ if test -z "${LT_MULTI_MODULE}"; then -+ # By default we will add the -single_module flag. You can override -+ # by either setting the environment variable LT_MULTI_MODULE -+ # non-empty at configure time, or by adding -multi_module to the -+ # link flags. -+ rm -rf libconftest.dylib* -+ echo "int foo(void){return 1;}" > conftest.c -+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD -+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err -+ _lt_result=$? -+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then -+ lt_cv_apple_cc_single_mod=yes -+ else -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ fi -+ rm -rf libconftest.dylib* -+ rm -f conftest.* -+ fi]) -+ AC_CACHE_CHECK([for -exported_symbols_list linker flag], -+ [lt_cv_ld_exported_symbols_list], -+ [lt_cv_ld_exported_symbols_list=no -+ save_LDFLAGS=$LDFLAGS -+ echo "_main" > conftest.sym -+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" -+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], -+ [lt_cv_ld_exported_symbols_list=yes], -+ [lt_cv_ld_exported_symbols_list=no]) -+ LDFLAGS="$save_LDFLAGS" - ]) -- -- if test "x$lt_cv_dlopen_self" = xyes; then -- LDFLAGS="$LDFLAGS $link_static_flag" -- AC_CACHE_CHECK([whether a statically linked program can dlopen itself], -- lt_cv_dlopen_self_static, [dnl -- _LT_AC_TRY_DLOPEN_SELF( -- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, -- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) -- ]) -+ case $host_os in -+ rhapsody* | darwin1.[[012]]) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; -+ darwin1.*) -+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; -+ darwin*) # darwin 5.x on -+ # if running on 10.5 or later, the deployment target defaults -+ # to the OS version, if on x86, and 10.4, the deployment -+ # target defaults to 10.4. Don't you love it? -+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in -+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; -+ 10.[[012]]*) -+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; -+ 10.*) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; -+ esac -+ ;; -+ esac -+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then -+ _lt_dar_single_mod='$single_module' -+ fi -+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then -+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' -+ else -+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' -+ fi -+ if test "$DSYMUTIL" != ":"; then -+ _lt_dsymutil='~$DSYMUTIL $lib || :' -+ else -+ _lt_dsymutil= - fi -- -- CPPFLAGS="$save_CPPFLAGS" -- LDFLAGS="$save_LDFLAGS" -- LIBS="$save_LIBS" - ;; - esac -+]) - -- case $lt_cv_dlopen_self in -- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; -- *) enable_dlopen_self=unknown ;; -- esac - -- case $lt_cv_dlopen_self_static in -- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; -- *) enable_dlopen_self_static=unknown ;; -+# _LT_DARWIN_LINKER_FEATURES -+# -------------------------- -+# Checks for linker and compiler features on darwin -+m4_defun([_LT_DARWIN_LINKER_FEATURES], -+[ -+ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_automatic, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" -+ case $cc_basename in -+ ifort*) _lt_dar_can_shared=yes ;; -+ *) _lt_dar_can_shared=$GCC ;; - esac --fi --])# AC_LIBTOOL_DLOPEN_SELF -- -+ if test "$_lt_dar_can_shared" = "yes"; then -+ output_verbose_link_cmd=echo -+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" -+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" -+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" -+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" -+ m4_if([$1], [CXX], -+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then -+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" -+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" -+ fi -+],[]) -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+]) - --# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) --# --------------------------------- --# Check to see if options -c and -o are simultaneously supported by compiler --AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], --[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl --AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], -- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], -- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no -- $rm -r conftest 2>/dev/null -- mkdir conftest -- cd conftest -- mkdir out -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -+# _LT_SYS_MODULE_PATH_AIX -+# ----------------------- -+# Links a minimal program and checks the executable -+# for the system default hardcoded library path. In most cases, -+# this is /usr/lib:/lib, but when the MPI compilers are used -+# the location of the communication and MPI libs are included too. -+# If we don't find anything, use the default library path according -+# to the aix ld manual. -+m4_defun([_LT_SYS_MODULE_PATH_AIX], -+[m4_require([_LT_DECL_SED])dnl -+AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -+lt_aix_libpath_sed=' -+ /Import File Strings/,/^$/ { -+ /^0/ { -+ s/^0 *$.*$$/\1/ -+ p -+ } -+ }' -+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+# Check for a 64-bit object if we didn't find anything. -+if test -z "$aix_libpath"; then -+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+fi],[]) -+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -+])# _LT_SYS_MODULE_PATH_AIX - -- lt_compiler_flag="-o out/conftest2.$ac_objext" -- # Insert the option either (1) after the last *FLAGS variable, or -- # (2) before a word containing "conftest.", or (3) at the end. -- # Note that $ac_compile itself does not contain backslashes and begins -- # with a dollar sign (not a hyphen), so the echo should work correctly. -- lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -- -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) -- (eval "$lt_compile" 2>out/conftest.err) -- ac_status=$? -- cat out/conftest.err >&AS_MESSAGE_LOG_FD -- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD -- if (exit $ac_status) && test -s out/conftest2.$ac_objext -- then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s out/conftest.err; then -- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes -- fi -- fi -- chmod u+w . -- $rm conftest* -- # SGI C++ compiler will create directory out/ii_files/ for -- # template instantiation -- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files -- $rm out/* && rmdir out -- cd .. -- rmdir conftest -- $rm conftest* --]) --])# AC_LIBTOOL_PROG_CC_C_O - -+# _LT_SHELL_INIT(ARG) -+# ------------------- -+m4_define([_LT_SHELL_INIT], -+[ifdef([AC_DIVERSION_NOTICE], -+ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], -+ [AC_DIVERT_PUSH(NOTICE)]) -+$1 -+AC_DIVERT_POP -+])# _LT_SHELL_INIT - --# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) --# ----------------------------------------- --# Check to see if we can do hard links to lock some files if needed --AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], --[AC_REQUIRE([_LT_AC_LOCK])dnl - --hard_links="nottested" --if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then -- # do not overwrite the value of need_locks provided by the user -- AC_MSG_CHECKING([if we can lock with hard links]) -- hard_links=yes -- $rm conftest* -- ln conftest.a conftest.b 2>/dev/null && hard_links=no -- touch conftest.a -- ln conftest.a conftest.b 2>&5 || hard_links=no -- ln conftest.a conftest.b 2>/dev/null && hard_links=no -- AC_MSG_RESULT([$hard_links]) -- if test "$hard_links" = no; then -- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) -- need_locks=warn -- fi --else -- need_locks=no --fi --])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS -+# _LT_PROG_ECHO_BACKSLASH -+# ----------------------- -+# Add some code to the start of the generated configure script which -+# will find an echo command which doesn't interpret backslashes. -+m4_defun([_LT_PROG_ECHO_BACKSLASH], -+[_LT_SHELL_INIT([ -+# Check that we are running under the correct shell. -+SHELL=${CONFIG_SHELL-/bin/sh} - -+case X$lt_ECHO in -+X*--fallback-echo) -+ # Remove one level of quotation (which was required for Make). -+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` -+ ;; -+esac - --# AC_LIBTOOL_OBJDIR --# ----------------- --AC_DEFUN([AC_LIBTOOL_OBJDIR], --[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], --[rm -f .libs 2>/dev/null --mkdir .libs 2>/dev/null --if test -d .libs; then -- lt_cv_objdir=.libs -+ECHO=${lt_ECHO-echo} -+if test "X[$]1" = X--no-reexec; then -+ # Discard the --no-reexec flag, and continue. -+ shift -+elif test "X[$]1" = X--fallback-echo; then -+ # Avoid inline document here, it may be left over -+ : -+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then -+ # Yippee, $ECHO works! -+ : - else -- # MS-DOS does not allow filenames that begin with a dot. -- lt_cv_objdir=_libs -+ # Restart under the correct shell. -+ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} - fi --rmdir .libs 2>/dev/null]) --objdir=$lt_cv_objdir --])# AC_LIBTOOL_OBJDIR - -+if test "X[$]1" = X--fallback-echo; then -+ # used as fallback echo -+ shift -+ cat <<_LT_EOF -+[$]* -+_LT_EOF -+ exit 0 -+fi - --# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) --# ---------------------------------------------- --# Check hardcoding attributes. --AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], --[AC_MSG_CHECKING([how to hardcode library paths into programs]) --_LT_AC_TAGVAR(hardcode_action, $1)= --if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ -- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ -- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then -+# The HP-UX ksh and POSIX shell print the target directory to stdout -+# if CDPATH is set. -+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -- # We can hardcode non-existant directories. -- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && -- # If the only mechanism to avoid hardcoding is shlibpath_var, we -- # have to relink, otherwise we might link with an installed library -- # when we should be linking with a yet-to-be-installed one -- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && -- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then -- # Linking always hardcodes the temporary library directory. -- _LT_AC_TAGVAR(hardcode_action, $1)=relink -- else -- # We can link without hardcoding, and we can hardcode nonexisting dirs. -- _LT_AC_TAGVAR(hardcode_action, $1)=immediate -+if test -z "$lt_ECHO"; then -+ if test "X${echo_test_string+set}" != Xset; then -+ # find a string as large as possible, as long as the shell can cope with it -+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do -+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... -+ if { echo_test_string=`eval $cmd`; } 2>/dev/null && -+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null -+ then -+ break -+ fi -+ done - fi --else -- # We cannot hardcode anything, or else we can only hardcode existing -- # directories. -- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported --fi --AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) - --if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then -- # Fast installation is not supported -- enable_fast_install=no --elif test "$shlibpath_overrides_runpath" = yes || -- test "$enable_shared" = no; then -- # Fast installation is not necessary -- enable_fast_install=needless --fi --])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH -+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ : -+ else -+ # The Solaris, AIX, and Digital Unix default echo programs unquote -+ # backslashes. This makes it impossible to quote backslashes using -+ # echo "$something" | sed 's/\\/\\\\/g' -+ # -+ # So, first we look for a working echo in the user's PATH. - -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+ for dir in $PATH /usr/ucb; do -+ IFS="$lt_save_ifs" -+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && -+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ ECHO="$dir/echo" -+ break -+ fi -+ done -+ IFS="$lt_save_ifs" - --# AC_LIBTOOL_SYS_LIB_STRIP --# ------------------------ --AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], --[striplib= --old_striplib= --AC_MSG_CHECKING([whether stripping libraries is possible]) --if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then -- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" -- test -z "$striplib" && striplib="$STRIP --strip-unneeded" -- AC_MSG_RESULT([yes]) --else --# FIXME - insert some real tests, host_os isn't really good enough -- case $host_os in -- darwin*) -- if test -n "$STRIP" ; then -- striplib="$STRIP -x" -- AC_MSG_RESULT([yes]) -- else -- AC_MSG_RESULT([no]) --fi -- ;; -- *) -- AC_MSG_RESULT([no]) -- ;; -- esac --fi --])# AC_LIBTOOL_SYS_LIB_STRIP -+ if test "X$ECHO" = Xecho; then -+ # We didn't find a better echo, so look for alternatives. -+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ # This shell has a builtin print -r that does the trick. -+ ECHO='print -r' -+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && -+ test "X$CONFIG_SHELL" != X/bin/ksh; then -+ # If we have ksh, try running configure again with it. -+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} -+ export ORIGINAL_CONFIG_SHELL -+ CONFIG_SHELL=/bin/ksh -+ export CONFIG_SHELL -+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} -+ else -+ # Try using printf. -+ ECHO='printf %s\n' -+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ # Cool, printf works -+ : -+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && -+ test "X$echo_testing_string" = 'X\t' && -+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL -+ export CONFIG_SHELL -+ SHELL="$CONFIG_SHELL" -+ export SHELL -+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" -+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && -+ test "X$echo_testing_string" = 'X\t' && -+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" -+ else -+ # maybe with a smaller string... -+ prev=: - -+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do -+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null -+ then -+ break -+ fi -+ prev="$cmd" -+ done - --# AC_LIBTOOL_SYS_DYNAMIC_LINKER --# ----------------------------- --# PORTME Fill in your ld.so characteristics --AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], --[AC_MSG_CHECKING([dynamic linker characteristics]) --library_names_spec= --libname_spec='lib$name' --soname_spec= --shrext_cmds=".so" --postinstall_cmds= --postuninstall_cmds= --finish_cmds= --finish_eval= --shlibpath_var= --shlibpath_overrides_runpath=unknown --version_type=none --dynamic_linker="$host_os ld.so" --sys_lib_dlsearch_path_spec="/lib /usr/lib" --if test "$GCC" = yes; then -- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then -- # if the path contains ";" then we assume it to be the separator -- # otherwise default to the standard path separator (i.e. ":") - it is -- # assumed that no part of a normal pathname contains ";" but that should -- # okay in the real world where ";" in dirpaths is itself problematic. -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -- else -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ if test "$prev" != 'sed 50q "[$]0"'; then -+ echo_test_string=`eval $prev` -+ export echo_test_string -+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} -+ else -+ # Oops. We lost completely, so just stick with echo. -+ ECHO=echo -+ fi -+ fi -+ fi -+ fi - fi --else -- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - fi --need_lib_prefix=unknown --hardcode_into_libs=no - --# when you set need_version to no, make sure it does not cause -set_version --# flags to be left without arguments --need_version=unknown -+# Copy echo and quote the copy suitably for passing to libtool from -+# the Makefile, instead of quoting the original, which is used later. -+lt_ECHO=$ECHO -+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then -+ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -+fi - --case $host_os in --aix3*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' -- shlibpath_var=LIBPATH -+AC_SUBST(lt_ECHO) -+]) -+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -+_LT_DECL([], [ECHO], [1], -+ [An echo program that does not interpret backslashes]) -+])# _LT_PROG_ECHO_BACKSLASH - -- # AIX 3 has no versioning support, so we append a major version to the name. -- soname_spec='${libname}${release}${shared_ext}$major' -- ;; - --aix4* | aix5*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- hardcode_into_libs=yes -- if test "$host_cpu" = ia64; then -- # AIX 5 supports IA64 -- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- else -- # With GCC up to 2.95.x, collect2 would create an import file -- # for dependence libraries. The import file would start with -- # the line `#! .'. This would cause the generated library to -- # depend on `.', always an invalid library. This was fixed in -- # development snapshots of GCC prior to 3.0. -- case $host_os in -- aix4 | aix4.[[01]] | aix4.[[01]].*) -- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' -- echo ' yes ' -- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then -- : -- else -- can_build_shared=no -- fi -- ;; -+# _LT_ENABLE_LOCK -+# --------------- -+m4_defun([_LT_ENABLE_LOCK], -+[AC_ARG_ENABLE([libtool-lock], -+ [AS_HELP_STRING([--disable-libtool-lock], -+ [avoid locking (might break parallel builds)])]) -+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -+ -+# Some flags need to be propagated to the compiler or linker for good -+# libtool support. -+case $host in -+ia64-*-hpux*) -+ # Find out which ABI we are using. -+ echo 'int i;' > conftest.$ac_ext -+ if AC_TRY_EVAL(ac_compile); then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *ELF-32*) -+ HPUX_IA64_MODE="32" -+ ;; -+ *ELF-64*) -+ HPUX_IA64_MODE="64" -+ ;; - esac -- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct -- # soname into executable. Probably we can add versioning support to -- # collect2, so additional links can be useful in future. -- if test "$aix_use_runtimelinking" = yes; then -- # If using run time linking (on AIX 4.2 or later) use lib.so -- # instead of lib.a to let people know that these are not -- # typical AIX shared libraries. -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ fi -+ rm -rf conftest* -+ ;; -+*-*-irix6*) -+ # Find out which ABI we are using. -+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext -+ if AC_TRY_EVAL(ac_compile); then -+ if test "$lt_cv_prog_gnu_ld" = yes; then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *32-bit*) -+ LD="${LD-ld} -melf32bsmip" -+ ;; -+ *N32*) -+ LD="${LD-ld} -melf32bmipn32" -+ ;; -+ *64-bit*) -+ LD="${LD-ld} -melf64bmip" -+ ;; -+ esac - else -- # We preserve .a as extension for shared libraries through AIX4.2 -- # and later when we are not doing run time linking. -- library_names_spec='${libname}${release}.a $libname.a' -- soname_spec='${libname}${release}${shared_ext}$major' -+ case `/usr/bin/file conftest.$ac_objext` in -+ *32-bit*) -+ LD="${LD-ld} -32" -+ ;; -+ *N32*) -+ LD="${LD-ld} -n32" -+ ;; -+ *64-bit*) -+ LD="${LD-ld} -64" -+ ;; -+ esac - fi -- shlibpath_var=LIBPATH - fi -+ rm -rf conftest* - ;; - --amigaos*) -- library_names_spec='$libname.ixlibrary $libname.a' -- # Create ${libname}_ixlibrary.a entries in /sys/libs. -- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[[^/]]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' -- ;; -- --beos*) -- library_names_spec='${libname}${shared_ext}' -- dynamic_linker="$host_os ld.so" -- shlibpath_var=LIBRARY_PATH -+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -+s390*-*linux*|s390*-*tpf*|sparc*-*linux*) -+ # Find out which ABI we are using. -+ echo 'int i;' > conftest.$ac_ext -+ if AC_TRY_EVAL(ac_compile); then -+ case `/usr/bin/file conftest.o` in -+ *32-bit*) -+ case $host in -+ x86_64-*kfreebsd*-gnu) -+ LD="${LD-ld} -m elf_i386_fbsd" -+ ;; -+ x86_64-*linux*) -+ LD="${LD-ld} -m elf_i386" -+ ;; -+ ppc64-*linux*|powerpc64-*linux*) -+ LD="${LD-ld} -m elf32ppclinux" -+ ;; -+ s390x-*linux*) -+ LD="${LD-ld} -m elf_s390" -+ ;; -+ sparc64-*linux*) -+ LD="${LD-ld} -m elf32_sparc" -+ ;; -+ esac -+ ;; -+ *64-bit*) -+ case $host in -+ x86_64-*kfreebsd*-gnu) -+ LD="${LD-ld} -m elf_x86_64_fbsd" -+ ;; -+ x86_64-*linux*) -+ LD="${LD-ld} -m elf_x86_64" -+ ;; -+ ppc*-*linux*|powerpc*-*linux*) -+ LD="${LD-ld} -m elf64ppc" -+ ;; -+ s390*-*linux*|s390*-*tpf*) -+ LD="${LD-ld} -m elf64_s390" -+ ;; -+ sparc*-*linux*) -+ LD="${LD-ld} -m elf64_sparc" -+ ;; -+ esac -+ ;; -+ esac -+ fi -+ rm -rf conftest* - ;; - --bsdi4*) -- version_type=linux -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" -- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" -- # the default ld.so.conf also contains /usr/contrib/lib and -- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow -- # libtool to hard-code these into programs -+*-*-sco3.2v5*) -+ # On SCO OpenServer 5, we need -belf to get full-featured binaries. -+ SAVE_CFLAGS="$CFLAGS" -+ CFLAGS="$CFLAGS -belf" -+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, -+ [AC_LANG_PUSH(C) -+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) -+ AC_LANG_POP]) -+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then -+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf -+ CFLAGS="$SAVE_CFLAGS" -+ fi - ;; -- --cygwin* | mingw* | pw32*) -- version_type=windows -- shrext_cmds=".dll" -- need_version=no -- need_lib_prefix=no -- -- case $GCC,$host_os in -- yes,cygwin* | yes,mingw* | yes,pw32*) -- library_names_spec='$libname.dll.a' -- # DLL is installed to $(libdir)/../bin by postinstall_cmds -- postinstall_cmds='base_file=`basename \${file}`~ -- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ -- dldir=$destdir/`dirname \$dlpath`~ -- test -d \$dldir || mkdir -p \$dldir~ -- $install_prog $dir/$dlname \$dldir/$dlname' -- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ -- dlpath=$dir/\$dldll~ -- $rm \$dlpath' -- shlibpath_overrides_runpath=yes -- -- case $host_os in -- cygwin*) -- # Cygwin DLLs use 'cyg' prefix rather than 'lib' -- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" -- ;; -- mingw*) -- # MinGW DLLs use traditional 'lib' prefix -- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then -- # It is most probably a Windows format PATH printed by -- # mingw gcc, but we are running on Cygwin. Gcc prints its search -- # path with ; separators, and with drive letters. We can handle the -- # drive letters (cygwin fileutils understands them), so leave them, -- # especially as we might pass files found there to a mingw objdump, -- # which wouldn't understand a cygwinified path. Ahh. -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -- else -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -- fi -- ;; -- pw32*) -- # pw32 DLLs use 'pw' prefix rather than 'lib' -- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -+sparc*-*solaris*) -+ # Find out which ABI we are using. -+ echo 'int i;' > conftest.$ac_ext -+ if AC_TRY_EVAL(ac_compile); then -+ case `/usr/bin/file conftest.o` in -+ *64-bit*) -+ case $lt_cv_prog_gnu_ld in -+ yes*) LD="${LD-ld} -m elf64_sparc" ;; -+ *) -+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then -+ LD="${LD-ld} -64" -+ fi -+ ;; -+ esac - ;; - esac -- ;; -- -- *) -- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' -- ;; -- esac -- dynamic_linker='Win32 ld.exe' -- # FIXME: first we should search . and the directory the executable is in -- shlibpath_var=PATH -- ;; -- --darwin* | rhapsody*) -- dynamic_linker="$host_os dyld" -- version_type=darwin -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' -- soname_spec='${libname}${release}${major}$shared_ext' -- shlibpath_overrides_runpath=yes -- shlibpath_var=DYLD_LIBRARY_PATH -- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' -- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. -- if test "$GCC" = yes; then -- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` -- else -- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi -- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' -+ rm -rf conftest* - ;; -+esac - --dgux*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- ;; -+need_locks="$enable_libtool_lock" -+])# _LT_ENABLE_LOCK - --freebsd1*) -- dynamic_linker=no -- ;; - --kfreebsd*-gnu) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- dynamic_linker='GNU ld.so' -- ;; -+# _LT_CMD_OLD_ARCHIVE -+# ------------------- -+m4_defun([_LT_CMD_OLD_ARCHIVE], -+[AC_CHECK_TOOL(AR, ar, false) -+test -z "$AR" && AR=ar -+test -z "$AR_FLAGS" && AR_FLAGS=cru -+_LT_DECL([], [AR], [1], [The archiver]) -+_LT_DECL([], [AR_FLAGS], [1]) - --freebsd*) -- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` -- version_type=freebsd-$objformat -- case $version_type in -- freebsd-elf*) -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -- need_version=no -- need_lib_prefix=no -- ;; -- freebsd-*) -- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' -- need_version=yes -- ;; -- esac -- shlibpath_var=LD_LIBRARY_PATH -+AC_CHECK_TOOL(STRIP, strip, :) -+test -z "$STRIP" && STRIP=: -+_LT_DECL([], [STRIP], [1], [A symbol stripping program]) -+ -+AC_CHECK_TOOL(RANLIB, ranlib, :) -+test -z "$RANLIB" && RANLIB=: -+_LT_DECL([], [RANLIB], [1], -+ [Commands used to install an old-style archive]) -+ -+# Determine commands to create old-style static archives. -+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -+old_postinstall_cmds='chmod 644 $oldlib' -+old_postuninstall_cmds= -+ -+if test -n "$RANLIB"; then - case $host_os in -- freebsd2*) -- shlibpath_overrides_runpath=yes -- ;; -- freebsd3.[01]* | freebsdelf3.[01]*) -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -+ openbsd*) -+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; -- *) # from 3.2 on -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -+ *) -+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac -- ;; -+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -+fi -+_LT_DECL([], [old_postinstall_cmds], [2]) -+_LT_DECL([], [old_postuninstall_cmds], [2]) -+_LT_TAGDECL([], [old_archive_cmds], [2], -+ [Commands used to build an old-style archive]) -+])# _LT_CMD_OLD_ARCHIVE - --gnu*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- hardcode_into_libs=yes -- ;; - --hpux9* | hpux10* | hpux11*) -- # Give a soname corresponding to the major version so that dld.sl refuses to -- # link against other versions. -- version_type=sunos -- need_lib_prefix=no -- need_version=no -- case "$host_cpu" in -- ia64*) -- shrext_cmds='.so' -- hardcode_into_libs=yes -- dynamic_linker="$host_os dld.so" -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- if test "X$HPUX_IA64_MODE" = X32; then -- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" -- else -- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" -- fi -- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -- ;; -- hppa*64*) -- shrext_cmds='.sl' -- hardcode_into_libs=yes -- dynamic_linker="$host_os dld.sl" -- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH -- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" -- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -- ;; -- *) -- shrext_cmds='.sl' -- dynamic_linker="$host_os dld.sl" -- shlibpath_var=SHLIB_PATH -- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- ;; -- esac -- # HP-UX runs *really* slowly unless shared libraries are mode 555. -- postinstall_cmds='chmod 555 $lib' -- ;; -+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -+# ---------------------------------------------------------------- -+# Check whether the given compiler option works -+AC_DEFUN([_LT_COMPILER_OPTION], -+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_DECL_SED])dnl -+AC_CACHE_CHECK([$1], [$2], -+ [$2=no -+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+ lt_compiler_flag="$3" -+ # Insert the option either (1) after the last *FLAGS variable, or -+ # (2) before a word containing "conftest.", or (3) at the end. -+ # Note that $ac_compile itself does not contain backslashes and begins -+ # with a dollar sign (not a hyphen), so the echo should work correctly. -+ # The option is referenced via a variable to avoid confusing sed. -+ lt_compile=`echo "$ac_compile" | $SED \ -+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -+ -e 's:$: $lt_compiler_flag:'` -+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) -+ (eval "$lt_compile" 2>conftest.err) -+ ac_status=$? -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD -+ if (exit $ac_status) && test -s "$ac_outfile"; then -+ # The compiler can only warn and ignore the option if not recognized -+ # So say no if there are warnings other than the usual output. -+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp -+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 -+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then -+ $2=yes -+ fi -+ fi -+ $RM conftest* -+]) - --irix5* | irix6* | nonstopux*) -- case $host_os in -- nonstopux*) version_type=nonstopux ;; -- *) -- if test "$lt_cv_prog_gnu_ld" = yes; then -- version_type=linux -- else -- version_type=irix -- fi ;; -- esac -- need_lib_prefix=no -- need_version=no -- soname_spec='${libname}${release}${shared_ext}$major' -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' -- case $host_os in -- irix5* | nonstopux*) -- libsuff= shlibsuff= -+if test x"[$]$2" = xyes; then -+ m4_if([$5], , :, [$5]) -+else -+ m4_if([$6], , :, [$6]) -+fi -+])# _LT_COMPILER_OPTION -+ -+# Old name: -+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) -+ -+ -+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -+# [ACTION-SUCCESS], [ACTION-FAILURE]) -+# ---------------------------------------------------- -+# Check whether the given linker option works -+AC_DEFUN([_LT_LINKER_OPTION], -+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_DECL_SED])dnl -+AC_CACHE_CHECK([$1], [$2], -+ [$2=no -+ save_LDFLAGS="$LDFLAGS" -+ LDFLAGS="$LDFLAGS $3" -+ echo "$lt_simple_link_test_code" > conftest.$ac_ext -+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then -+ # The linker can only warn and ignore the option if not recognized -+ # So say no if there are warnings -+ if test -s conftest.err; then -+ # Append any errors to the config.log. -+ cat conftest.err 1>&AS_MESSAGE_LOG_FD -+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp -+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 -+ if diff conftest.exp conftest.er2 >/dev/null; then -+ $2=yes -+ fi -+ else -+ $2=yes -+ fi -+ fi -+ $RM -r conftest* -+ LDFLAGS="$save_LDFLAGS" -+]) -+ -+if test x"[$]$2" = xyes; then -+ m4_if([$4], , :, [$4]) -+else -+ m4_if([$5], , :, [$5]) -+fi -+])# _LT_LINKER_OPTION -+ -+# Old name: -+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) -+ -+ -+# LT_CMD_MAX_LEN -+#--------------- -+AC_DEFUN([LT_CMD_MAX_LEN], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+# find the maximum length of command line arguments -+AC_MSG_CHECKING([the maximum length of command line arguments]) -+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl -+ i=0 -+ teststring="ABCD" -+ -+ case $build_os in -+ msdosdjgpp*) -+ # On DJGPP, this test can blow up pretty badly due to problems in libc -+ # (any single argument exceeding 2000 bytes causes a buffer overrun -+ # during glob expansion). Even if it were fixed, the result of this -+ # check would be larger than it should be. -+ lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; -- *) -- case $LD in # libtool.m4 will add one of these switches to LD -- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") -- libsuff= shlibsuff= libmagic=32-bit;; -- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") -- libsuff=32 shlibsuff=N32 libmagic=N32;; -- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") -- libsuff=64 shlibsuff=64 libmagic=64-bit;; -- *) libsuff= shlibsuff= libmagic=never-match;; -- esac -+ -+ gnu*) -+ # Under GNU Hurd, this test is not required because there is -+ # no limit to the length of command line arguments. -+ # Libtool will interpret -1 as no limit whatsoever -+ lt_cv_sys_max_cmd_len=-1; - ;; -- esac -- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH -- shlibpath_overrides_runpath=no -- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" -- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" -- hardcode_into_libs=yes -- ;; - --# No shared lib support for Linux oldld, aout, or coff. --linux*oldld* | linux*aout* | linux*coff*) -- dynamic_linker=no -- ;; -+ cygwin* | mingw* | cegcc*) -+ # On Win9x/ME, this test blows up -- it succeeds, but takes -+ # about 5 minutes as the teststring grows exponentially. -+ # Worse, since 9x/ME are not pre-emptively multitasking, -+ # you end up with a "frozen" computer, even though with patience -+ # the test eventually succeeds (with a max line length of 256k). -+ # Instead, let's just punt: use the minimum linelength reported by -+ # all of the supported platforms: 8192 (on NT/2K/XP). -+ lt_cv_sys_max_cmd_len=8192; -+ ;; - --# This must be Linux ELF. --linux*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- # This implies no fast_install, which is unacceptable. -- # Some rework will be needed to allow for fast_install -- # before this can be enabled. -- hardcode_into_libs=yes -+ amigaos*) -+ # On AmigaOS with pdksh, this test takes hours, literally. -+ # So we just punt and use a minimum line length of 8192. -+ lt_cv_sys_max_cmd_len=8192; -+ ;; - -- # find out which ABI we are using -- libsuff= -- case "$host_cpu" in -- x86_64*|s390x*|powerpc64*) -- echo '[#]line __oline__ "configure"' > conftest.$ac_ext -- if AC_TRY_EVAL(ac_compile); then -- case `/usr/bin/file conftest.$ac_objext` in -- *64-bit*) -- libsuff=64 -- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" -- ;; -+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) -+ # This has been around since 386BSD, at least. Likely further. -+ if test -x /sbin/sysctl; then -+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` -+ elif test -x /usr/sbin/sysctl; then -+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` -+ else -+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs -+ fi -+ # And add a safety zone -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` -+ ;; -+ -+ interix*) -+ # We know the value 262144 and hardcode it with a safety zone (like BSD) -+ lt_cv_sys_max_cmd_len=196608 -+ ;; -+ -+ osf*) -+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure -+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not -+ # nice to cause kernel panics so lets avoid the loop below. -+ # First set a reasonable default. -+ lt_cv_sys_max_cmd_len=16384 -+ # -+ if test -x /sbin/sysconfig; then -+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in -+ *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi -- rm -rf conftest* -+ ;; -+ sco3.2v5*) -+ lt_cv_sys_max_cmd_len=102400 -+ ;; -+ sysv5* | sco5v6* | sysv4.2uw2*) -+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` -+ if test -n "$kargmax"; then -+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` -+ else -+ lt_cv_sys_max_cmd_len=32768 -+ fi -+ ;; -+ *) -+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` -+ if test -n "$lt_cv_sys_max_cmd_len"; then -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` -+ else -+ # Make teststring a little bigger before we do anything with it. -+ # a 1K string should be a reasonable start. -+ for i in 1 2 3 4 5 6 7 8 ; do -+ teststring=$teststring$teststring -+ done -+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} -+ # If test is not a shell built-in, we'll probably end up computing a -+ # maximum length that is only half of the actual maximum length, but -+ # we can't tell. -+ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ -+ = "XX$teststring$teststring"; } >/dev/null 2>&1 && -+ test $i != 17 # 1/2 MB should be enough -+ do -+ i=`expr $i + 1` -+ teststring=$teststring$teststring -+ done -+ # Only check the string length outside the loop. -+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` -+ teststring= -+ # Add a significant safety factor because C++ compilers can tack on -+ # massive amounts of additional arguments before passing them to the -+ # linker. It appears as though 1/2 is a usable value. -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` -+ fi - ;; - esac -+]) -+if test -n $lt_cv_sys_max_cmd_len ; then -+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -+else -+ AC_MSG_RESULT(none) -+fi -+max_cmd_len=$lt_cv_sys_max_cmd_len -+_LT_DECL([], [max_cmd_len], [0], -+ [What is the maximum length of a command?]) -+])# LT_CMD_MAX_LEN - -- # Append ld.so.conf contents to the search path -- if test -f /etc/ld.so.conf; then -- lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '` -- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" -- fi -+# Old name: -+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) - -- # We used to test for /lib/ld.so.1 and disable shared libraries on -- # powerpc, because MkLinux only supported shared libraries with the -- # GNU dynamic linker. Since this was broken with cross compilers, -- # most powerpc-linux boxes support dynamic linking these days and -- # people can always --disable-shared, the test was removed, and we -- # assume the GNU/Linux dynamic linker is in use. -- dynamic_linker='GNU/Linux ld.so' -- ;; - --knetbsd*-gnu) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- dynamic_linker='GNU ld.so' -- ;; -+# _LT_HEADER_DLFCN -+# ---------------- -+m4_defun([_LT_HEADER_DLFCN], -+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl -+])# _LT_HEADER_DLFCN - --netbsd*) -- version_type=sunos -- need_lib_prefix=no -- need_version=no -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -- dynamic_linker='NetBSD (a.out) ld.so' -- else -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- dynamic_linker='NetBSD ld.elf_so' -- fi -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -- ;; - --newsos6) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- ;; -+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -+# ---------------------------------------------------------------- -+m4_defun([_LT_TRY_DLOPEN_SELF], -+[m4_require([_LT_HEADER_DLFCN])dnl -+if test "$cross_compiling" = yes; then : -+ [$4] -+else -+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 -+ lt_status=$lt_dlunknown -+ cat > conftest.$ac_ext <<_LT_EOF -+[#line __oline__ "configure" -+#include "confdefs.h" - --nto-qnx*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- ;; -+#if HAVE_DLFCN_H -+#include -+#endif - --openbsd*) -- version_type=sunos -- need_lib_prefix=no -- need_version=yes -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -- case $host_os in -- openbsd2.[[89]] | openbsd2.[[89]].*) -- shlibpath_overrides_runpath=no -- ;; -- *) -- shlibpath_overrides_runpath=yes -- ;; -- esac -- else -- shlibpath_overrides_runpath=yes -- fi -- ;; -+#include - --os2*) -- libname_spec='$name' -- shrext_cmds=".dll" -- need_lib_prefix=no -- library_names_spec='$libname${shared_ext} $libname.a' -- dynamic_linker='OS/2 ld.exe' -- shlibpath_var=LIBPATH -- ;; -+#ifdef RTLD_GLOBAL -+# define LT_DLGLOBAL RTLD_GLOBAL -+#else -+# ifdef DL_GLOBAL -+# define LT_DLGLOBAL DL_GLOBAL -+# else -+# define LT_DLGLOBAL 0 -+# endif -+#endif - --osf3* | osf4* | osf5*) -- version_type=osf -- need_lib_prefix=no -- need_version=no -- soname_spec='${libname}${release}${shared_ext}$major' -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" -- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" -- ;; -+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we -+ find out it does not work in some platform. */ -+#ifndef LT_DLLAZY_OR_NOW -+# ifdef RTLD_LAZY -+# define LT_DLLAZY_OR_NOW RTLD_LAZY -+# else -+# ifdef DL_LAZY -+# define LT_DLLAZY_OR_NOW DL_LAZY -+# else -+# ifdef RTLD_NOW -+# define LT_DLLAZY_OR_NOW RTLD_NOW -+# else -+# ifdef DL_NOW -+# define LT_DLLAZY_OR_NOW DL_NOW -+# else -+# define LT_DLLAZY_OR_NOW 0 -+# endif -+# endif -+# endif -+# endif -+#endif - --sco3.2v5*) -- version_type=osf -- soname_spec='${libname}${release}${shared_ext}$major' -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- ;; -+void fnord() { int i=42;} -+int main () -+{ -+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -+ int status = $lt_dlunknown; - --solaris*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -- # ldd complains unless libraries are executable -- postinstall_cmds='chmod +x $lib' -- ;; -+ if (self) -+ { -+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -+ /* dlclose (self); */ -+ } -+ else -+ puts (dlerror ()); - --sunos4*) -- version_type=sunos -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- if test "$with_gnu_ld" = yes; then -- need_lib_prefix=no -+ return status; -+}] -+_LT_EOF -+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then -+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null -+ lt_status=$? -+ case x$lt_status in -+ x$lt_dlno_uscore) $1 ;; -+ x$lt_dlneed_uscore) $2 ;; -+ x$lt_dlunknown|x*) $3 ;; -+ esac -+ else : -+ # compilation failed -+ $3 - fi -- need_version=yes -- ;; -+fi -+rm -fr conftest* -+])# _LT_TRY_DLOPEN_SELF - --sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- case $host_vendor in -- sni) -- shlibpath_overrides_runpath=no -- need_lib_prefix=no -- export_dynamic_flag_spec='${wl}-Blargedynsym' -- runpath_var=LD_RUN_PATH -- ;; -- siemens) -- need_lib_prefix=no -- ;; -- motorola) -- need_lib_prefix=no -- need_version=no -- shlibpath_overrides_runpath=no -- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' -- ;; -- esac -- ;; - --sysv4*MP*) -- if test -d /usr/nec ;then -- version_type=linux -- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' -- soname_spec='$libname${shared_ext}.$major' -- shlibpath_var=LD_LIBRARY_PATH -- fi -- ;; -+# LT_SYS_DLOPEN_SELF -+# ------------------ -+AC_DEFUN([LT_SYS_DLOPEN_SELF], -+[m4_require([_LT_HEADER_DLFCN])dnl -+if test "x$enable_dlopen" != xyes; then -+ enable_dlopen=unknown -+ enable_dlopen_self=unknown -+ enable_dlopen_self_static=unknown -+else -+ lt_cv_dlopen=no -+ lt_cv_dlopen_libs= - --uts4*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- ;; -+ case $host_os in -+ beos*) -+ lt_cv_dlopen="load_add_on" -+ lt_cv_dlopen_libs= -+ lt_cv_dlopen_self=yes -+ ;; - --*) -- dynamic_linker=no -- ;; --esac --AC_MSG_RESULT([$dynamic_linker]) --test "$dynamic_linker" = no && can_build_shared=no --])# AC_LIBTOOL_SYS_DYNAMIC_LINKER -+ mingw* | pw32* | cegcc*) -+ lt_cv_dlopen="LoadLibrary" -+ lt_cv_dlopen_libs= -+ ;; - -+ cygwin*) -+ lt_cv_dlopen="dlopen" -+ lt_cv_dlopen_libs= -+ ;; - --# _LT_AC_TAGCONFIG --# ---------------- --AC_DEFUN([_LT_AC_TAGCONFIG], --[AC_ARG_WITH([tags], -- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], -- [include additional configurations @<:@automatic@:>@])], -- [tagnames="$withval"]) -- --if test -f "$ltmain" && test -n "$tagnames"; then -- if test ! -f "${ofile}"; then -- AC_MSG_WARN([output file `$ofile' does not exist]) -- fi -+ darwin*) -+ # if libdl is installed we need to link against it -+ AC_CHECK_LIB([dl], [dlopen], -+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ -+ lt_cv_dlopen="dyld" -+ lt_cv_dlopen_libs= -+ lt_cv_dlopen_self=yes -+ ]) -+ ;; - -- if test -z "$LTCC"; then -- eval "`$SHELL ${ofile} --config | grep '^LTCC='`" -- if test -z "$LTCC"; then -- AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) -- else -- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) -- fi -+ *) -+ AC_CHECK_FUNC([shl_load], -+ [lt_cv_dlopen="shl_load"], -+ [AC_CHECK_LIB([dld], [shl_load], -+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], -+ [AC_CHECK_FUNC([dlopen], -+ [lt_cv_dlopen="dlopen"], -+ [AC_CHECK_LIB([dl], [dlopen], -+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], -+ [AC_CHECK_LIB([svld], [dlopen], -+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], -+ [AC_CHECK_LIB([dld], [dld_link], -+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) -+ ]) -+ ]) -+ ]) -+ ]) -+ ]) -+ ;; -+ esac -+ -+ if test "x$lt_cv_dlopen" != xno; then -+ enable_dlopen=yes -+ else -+ enable_dlopen=no - fi - -- # Extract list of available tagged configurations in $ofile. -- # Note that this assumes the entire list is on one line. -- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=$.*$$/\1/' -e 's/\"//g'` -+ case $lt_cv_dlopen in -+ dlopen) -+ save_CPPFLAGS="$CPPFLAGS" -+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - -- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -- for tagname in $tagnames; do -- IFS="$lt_save_ifs" -- # Check whether tagname contains only valid characters -- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in -- "") ;; -- *) AC_MSG_ERROR([invalid tag name: $tagname]) -- ;; -- esac -+ save_LDFLAGS="$LDFLAGS" -+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - -- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null -- then -- AC_MSG_ERROR([tag name \"$tagname\" already exists]) -- fi -+ save_LIBS="$LIBS" -+ LIBS="$lt_cv_dlopen_libs $LIBS" - -- # Update the list of available tags. -- if test -n "$tagname"; then -- echo appending configuration tag \"$tagname\" to $ofile -- -- case $tagname in -- CXX) -- if test -n "$CXX" && test "X$CXX" != "Xno"; then -- AC_LIBTOOL_LANG_CXX_CONFIG -- else -- tagname="" -- fi -- ;; -+ AC_CACHE_CHECK([whether a program can dlopen itself], -+ lt_cv_dlopen_self, [dnl -+ _LT_TRY_DLOPEN_SELF( -+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, -+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) -+ ]) - -- F77) -- if test -n "$F77" && test "X$F77" != "Xno"; then -- AC_LIBTOOL_LANG_F77_CONFIG -- else -- tagname="" -- fi -- ;; -+ if test "x$lt_cv_dlopen_self" = xyes; then -+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" -+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself], -+ lt_cv_dlopen_self_static, [dnl -+ _LT_TRY_DLOPEN_SELF( -+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, -+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) -+ ]) -+ fi - -- GCJ) -- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then -- AC_LIBTOOL_LANG_GCJ_CONFIG -- else -- tagname="" -- fi -- ;; -+ CPPFLAGS="$save_CPPFLAGS" -+ LDFLAGS="$save_LDFLAGS" -+ LIBS="$save_LIBS" -+ ;; -+ esac - -- RC) -- AC_LIBTOOL_LANG_RC_CONFIG -- ;; -+ case $lt_cv_dlopen_self in -+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; -+ *) enable_dlopen_self=unknown ;; -+ esac - -- *) -- AC_MSG_ERROR([Unsupported tag name: $tagname]) -- ;; -- esac -+ case $lt_cv_dlopen_self_static in -+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; -+ *) enable_dlopen_self_static=unknown ;; -+ esac -+fi -+_LT_DECL([dlopen_support], [enable_dlopen], [0], -+ [Whether dlopen is supported]) -+_LT_DECL([dlopen_self], [enable_dlopen_self], [0], -+ [Whether dlopen of programs is supported]) -+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], -+ [Whether dlopen of statically linked programs is supported]) -+])# LT_SYS_DLOPEN_SELF -+ -+# Old name: -+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) - -- # Append the new tag name to the list of available tags. -- if test -n "$tagname" ; then -- available_tags="$available_tags $tagname" -- fi -- fi -- done -- IFS="$lt_save_ifs" -- -- # Now substitute the updated list of available tags. -- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then -- mv "${ofile}T" "$ofile" -- chmod +x "$ofile" -- else -- rm -f "${ofile}T" -- AC_MSG_ERROR([unable to update list of available tagged configurations.]) -- fi --fi --])# _LT_AC_TAGCONFIG -- -- --# AC_LIBTOOL_DLOPEN --# ----------------- --# enable checks for dlopen support --AC_DEFUN([AC_LIBTOOL_DLOPEN], -- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) --])# AC_LIBTOOL_DLOPEN -- -- --# AC_LIBTOOL_WIN32_DLL --# -------------------- --# declare package support for building win32 dll's --AC_DEFUN([AC_LIBTOOL_WIN32_DLL], --[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) --])# AC_LIBTOOL_WIN32_DLL -- -- --# AC_ENABLE_SHARED([DEFAULT]) --# --------------------------- --# implement the --enable-shared flag --# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. --AC_DEFUN([AC_ENABLE_SHARED], --[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl --AC_ARG_ENABLE([shared], -- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], -- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], -- [p=${PACKAGE-default} -- case $enableval in -- yes) enable_shared=yes ;; -- no) enable_shared=no ;; -- *) -- enable_shared=no -- # Look at the argument we got. We use all the common list separators. -- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -- for pkg in $enableval; do -- IFS="$lt_save_ifs" -- if test "X$pkg" = "X$p"; then -- enable_shared=yes -- fi -- done -- IFS="$lt_save_ifs" -- ;; -- esac], -- [enable_shared=]AC_ENABLE_SHARED_DEFAULT) --])# AC_ENABLE_SHARED -- -- --# AC_DISABLE_SHARED --# ----------------- --#- set the default shared flag to --disable-shared --AC_DEFUN([AC_DISABLE_SHARED], --[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl --AC_ENABLE_SHARED(no) --])# AC_DISABLE_SHARED - -- --# AC_ENABLE_STATIC([DEFAULT]) -+# _LT_COMPILER_C_O([TAGNAME]) - # --------------------------- --# implement the --enable-static flag --# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. --AC_DEFUN([AC_ENABLE_STATIC], --[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl --AC_ARG_ENABLE([static], -- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], -- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], -- [p=${PACKAGE-default} -- case $enableval in -- yes) enable_static=yes ;; -- no) enable_static=no ;; -- *) -- enable_static=no -- # Look at the argument we got. We use all the common list separators. -- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -- for pkg in $enableval; do -- IFS="$lt_save_ifs" -- if test "X$pkg" = "X$p"; then -- enable_static=yes -- fi -- done -- IFS="$lt_save_ifs" -- ;; -- esac], -- [enable_static=]AC_ENABLE_STATIC_DEFAULT) --])# AC_ENABLE_STATIC -- -- --# AC_DISABLE_STATIC --# ----------------- --# set the default static flag to --disable-static --AC_DEFUN([AC_DISABLE_STATIC], --[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl --AC_ENABLE_STATIC(no) --])# AC_DISABLE_STATIC -+# Check to see if options -c and -o are simultaneously supported by compiler. -+# This macro does not hard code the compiler like AC_PROG_CC_C_O. -+m4_defun([_LT_COMPILER_C_O], -+[m4_require([_LT_DECL_SED])dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_TAG_COMPILER])dnl -+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], -+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], -+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no -+ $RM -r conftest 2>/dev/null -+ mkdir conftest -+ cd conftest -+ mkdir out -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext - -+ lt_compiler_flag="-o out/conftest2.$ac_objext" -+ # Insert the option either (1) after the last *FLAGS variable, or -+ # (2) before a word containing "conftest.", or (3) at the end. -+ # Note that $ac_compile itself does not contain backslashes and begins -+ # with a dollar sign (not a hyphen), so the echo should work correctly. -+ lt_compile=`echo "$ac_compile" | $SED \ -+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -+ -e 's:$: $lt_compiler_flag:'` -+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) -+ (eval "$lt_compile" 2>out/conftest.err) -+ ac_status=$? -+ cat out/conftest.err >&AS_MESSAGE_LOG_FD -+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD -+ if (exit $ac_status) && test -s out/conftest2.$ac_objext -+ then -+ # The compiler can only warn and ignore the option if not recognized -+ # So say no if there are warnings -+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp -+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 -+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then -+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes -+ fi -+ fi -+ chmod u+w . 2>&AS_MESSAGE_LOG_FD -+ $RM conftest* -+ # SGI C++ compiler will create directory out/ii_files/ for -+ # template instantiation -+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files -+ $RM out/* && rmdir out -+ cd .. -+ $RM -r conftest -+ $RM conftest* -+]) -+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], -+ [Does compiler simultaneously support -c and -o options?]) -+])# _LT_COMPILER_C_O - --# AC_ENABLE_FAST_INSTALL([DEFAULT]) --# --------------------------------- --# implement the --enable-fast-install flag --# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. --AC_DEFUN([AC_ENABLE_FAST_INSTALL], --[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl --AC_ARG_ENABLE([fast-install], -- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], -- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], -- [p=${PACKAGE-default} -- case $enableval in -- yes) enable_fast_install=yes ;; -- no) enable_fast_install=no ;; -- *) -- enable_fast_install=no -- # Look at the argument we got. We use all the common list separators. -- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -- for pkg in $enableval; do -- IFS="$lt_save_ifs" -- if test "X$pkg" = "X$p"; then -- enable_fast_install=yes -- fi -- done -- IFS="$lt_save_ifs" -- ;; -- esac], -- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) --])# AC_ENABLE_FAST_INSTALL - -+# _LT_COMPILER_FILE_LOCKS([TAGNAME]) -+# ---------------------------------- -+# Check to see if we can do hard links to lock some files if needed -+m4_defun([_LT_COMPILER_FILE_LOCKS], -+[m4_require([_LT_ENABLE_LOCK])dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+_LT_COMPILER_C_O([$1]) - --# AC_DISABLE_FAST_INSTALL --# ----------------------- --# set the default to --disable-fast-install --AC_DEFUN([AC_DISABLE_FAST_INSTALL], --[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl --AC_ENABLE_FAST_INSTALL(no) --])# AC_DISABLE_FAST_INSTALL -+hard_links="nottested" -+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then -+ # do not overwrite the value of need_locks provided by the user -+ AC_MSG_CHECKING([if we can lock with hard links]) -+ hard_links=yes -+ $RM conftest* -+ ln conftest.a conftest.b 2>/dev/null && hard_links=no -+ touch conftest.a -+ ln conftest.a conftest.b 2>&5 || hard_links=no -+ ln conftest.a conftest.b 2>/dev/null && hard_links=no -+ AC_MSG_RESULT([$hard_links]) -+ if test "$hard_links" = no; then -+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) -+ need_locks=warn -+ fi -+else -+ need_locks=no -+fi -+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) -+])# _LT_COMPILER_FILE_LOCKS - - --# AC_LIBTOOL_PICMODE([MODE]) --# -------------------------- --# implement the --with-pic flag --# MODE is either `yes' or `no'. If omitted, it defaults to `both'. --AC_DEFUN([AC_LIBTOOL_PICMODE], --[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl --pic_mode=ifelse($#,1,$1,default) --])# AC_LIBTOOL_PICMODE -+# _LT_CHECK_OBJDIR -+# ---------------- -+m4_defun([_LT_CHECK_OBJDIR], -+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -+[rm -f .libs 2>/dev/null -+mkdir .libs 2>/dev/null -+if test -d .libs; then -+ lt_cv_objdir=.libs -+else -+ # MS-DOS does not allow filenames that begin with a dot. -+ lt_cv_objdir=_libs -+fi -+rmdir .libs 2>/dev/null]) -+objdir=$lt_cv_objdir -+_LT_DECL([], [objdir], [0], -+ [The name of the directory that contains temporary libtool files])dnl -+m4_pattern_allow([LT_OBJDIR])dnl -+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", -+ [Define to the sub-directory in which libtool stores uninstalled libraries.]) -+])# _LT_CHECK_OBJDIR - - --# AC_PROG_EGREP --# ------------- --# This is predefined starting with Autoconf 2.54, so this conditional --# definition can be removed once we require Autoconf 2.54 or later. --m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], --[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], -- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 -- then ac_cv_prog_egrep='grep -E' -- else ac_cv_prog_egrep='egrep' -- fi]) -- EGREP=$ac_cv_prog_egrep -- AC_SUBST([EGREP]) --])]) -+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) -+# -------------------------------------- -+# Check hardcoding attributes. -+m4_defun([_LT_LINKER_HARDCODE_LIBPATH], -+[AC_MSG_CHECKING([how to hardcode library paths into programs]) -+_LT_TAGVAR(hardcode_action, $1)= -+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || -+ test -n "$_LT_TAGVAR(runpath_var, $1)" || -+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - -+ # We can hardcode non-existent directories. -+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && -+ # If the only mechanism to avoid hardcoding is shlibpath_var, we -+ # have to relink, otherwise we might link with an installed library -+ # when we should be linking with a yet-to-be-installed one -+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && -+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then -+ # Linking always hardcodes the temporary library directory. -+ _LT_TAGVAR(hardcode_action, $1)=relink -+ else -+ # We can link without hardcoding, and we can hardcode nonexisting dirs. -+ _LT_TAGVAR(hardcode_action, $1)=immediate -+ fi -+else -+ # We cannot hardcode anything, or else we can only hardcode existing -+ # directories. -+ _LT_TAGVAR(hardcode_action, $1)=unsupported -+fi -+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) - --# AC_PATH_TOOL_PREFIX --# ------------------- --# find a file program which can recognise shared library --AC_DEFUN([AC_PATH_TOOL_PREFIX], --[AC_REQUIRE([AC_PROG_EGREP])dnl --AC_MSG_CHECKING([for $1]) --AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, --[case $MAGIC_CMD in --[[\\/*] | ?:[\\/]*]) -- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. -- ;; --*) -- lt_save_MAGIC_CMD="$MAGIC_CMD" -- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR --dnl $ac_dummy forces splitting on constant user-supplied paths. --dnl POSIX.2 word splitting is done only on the output of word expansions, --dnl not every word. This closes a longstanding sh security hole. -- ac_dummy="ifelse([$2], , $PATH, [$2])" -- for ac_dir in $ac_dummy; do -- IFS="$lt_save_ifs" -- test -z "$ac_dir" && ac_dir=. -- if test -f $ac_dir/$1; then -- lt_cv_path_MAGIC_CMD="$ac_dir/$1" -- if test -n "$file_magic_test_file"; then -- case $deplibs_check_method in -- "file_magic "*) -- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic $.*$\"`" -- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | -- $EGREP "$file_magic_regex" > /dev/null; then -- : -- else -- cat <&2 -+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || -+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then -+ # Fast installation is not supported -+ enable_fast_install=no -+elif test "$shlibpath_overrides_runpath" = yes || -+ test "$enable_shared" = no; then -+ # Fast installation is not necessary -+ enable_fast_install=needless -+fi -+_LT_TAGDECL([], [hardcode_action], [0], -+ [How to hardcode a shared library path into an executable]) -+])# _LT_LINKER_HARDCODE_LIBPATH - --*** Warning: the command libtool uses to detect shared libraries, --*** $file_magic_cmd, produces output that libtool cannot recognize. --*** The result is that libtool may fail to recognize shared libraries --*** as such. This will affect the creation of libtool libraries that --*** depend on shared libraries, but programs linked with such libtool --*** libraries will work regardless of this problem. Nevertheless, you --*** may want to report the problem to your system manager and/or to --*** bug-libtool@gnu.org - --EOF -- fi ;; -- esac -- fi -- break -- fi -- done -- IFS="$lt_save_ifs" -- MAGIC_CMD="$lt_save_MAGIC_CMD" -- ;; --esac]) --MAGIC_CMD="$lt_cv_path_MAGIC_CMD" --if test -n "$MAGIC_CMD"; then -- AC_MSG_RESULT($MAGIC_CMD) -+# _LT_CMD_STRIPLIB -+# ---------------- -+m4_defun([_LT_CMD_STRIPLIB], -+[m4_require([_LT_DECL_EGREP]) -+striplib= -+old_striplib= -+AC_MSG_CHECKING([whether stripping libraries is possible]) -+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then -+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" -+ test -z "$striplib" && striplib="$STRIP --strip-unneeded" -+ AC_MSG_RESULT([yes]) - else -- AC_MSG_RESULT(no) -+# FIXME - insert some real tests, host_os isn't really good enough -+ case $host_os in -+ darwin*) -+ if test -n "$STRIP" ; then -+ striplib="$STRIP -x" -+ old_striplib="$STRIP -S" -+ AC_MSG_RESULT([yes]) -+ else -+ AC_MSG_RESULT([no]) -+ fi -+ ;; -+ *) -+ AC_MSG_RESULT([no]) -+ ;; -+ esac - fi --])# AC_PATH_TOOL_PREFIX -+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) -+_LT_DECL([], [striplib], [1]) -+])# _LT_CMD_STRIPLIB - - --# AC_PATH_MAGIC --# ------------- --# find a file program which can recognise a shared library --AC_DEFUN([AC_PATH_MAGIC], --[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) --if test -z "$lt_cv_path_MAGIC_CMD"; then -- if test -n "$ac_tool_prefix"; then -- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) -+# _LT_SYS_DYNAMIC_LINKER([TAG]) -+# ----------------------------- -+# PORTME Fill in your ld.so characteristics -+m4_defun([_LT_SYS_DYNAMIC_LINKER], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+m4_require([_LT_DECL_EGREP])dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_DECL_OBJDUMP])dnl -+m4_require([_LT_DECL_SED])dnl -+AC_MSG_CHECKING([dynamic linker characteristics]) -+m4_if([$1], -+ [], [ -+if test "$GCC" = yes; then -+ case $host_os in -+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; -+ *) lt_awk_arg="/^libraries:/" ;; -+ esac -+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` -+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then -+ # if the path contains ";" then we assume it to be the separator -+ # otherwise default to the standard path separator (i.e. ":") - it is -+ # assumed that no part of a normal pathname contains ";" but that should -+ # okay in the real world where ";" in dirpaths is itself problematic. -+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else -- MAGIC_CMD=: -+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi --fi --])# AC_PATH_MAGIC -- -- --# AC_PROG_LD --# ---------- --# find the pathname to the GNU or non-GNU linker --AC_DEFUN([AC_PROG_LD], --[AC_ARG_WITH([gnu-ld], -- [AC_HELP_STRING([--with-gnu-ld], -- [assume the C compiler uses GNU ld @<:@default=no@:>@])], -- [test "$withval" = no || with_gnu_ld=yes], -- [with_gnu_ld=no]) --AC_REQUIRE([LT_AC_PROG_SED])dnl --AC_REQUIRE([AC_PROG_CC])dnl --AC_REQUIRE([AC_CANONICAL_HOST])dnl --AC_REQUIRE([AC_CANONICAL_BUILD])dnl --ac_prog=ld --if test "$GCC" = yes; then -- # Check if gcc -print-prog-name=ld gives a path. -- AC_MSG_CHECKING([for ld used by $CC]) -- case $host in -- *-*-mingw*) -- # gcc leaves a trailing carriage return which upsets mingw -- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; -- *) -- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; -- esac -- case $ac_prog in -- # Accept absolute paths. -- [[\\/]]* | ?:[[\\/]]*) -- re_direlt='/[[^/]][[^/]]*/\.\./' -- # Canonicalize the pathname of ld -- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` -- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do -- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` -- done -- test -z "$LD" && LD="$ac_prog" -- ;; -- "") -- # If it fails, then pretend we aren't using GCC. -- ac_prog=ld -- ;; -- *) -- # If it is relative, then search for the first ld in PATH. -- with_gnu_ld=unknown -- ;; -- esac --elif test "$with_gnu_ld" = yes; then -- AC_MSG_CHECKING([for GNU ld]) --else -- AC_MSG_CHECKING([for non-GNU ld]) --fi --AC_CACHE_VAL(lt_cv_path_LD, --[if test -z "$LD"; then -- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -- for ac_dir in $PATH; do -- IFS="$lt_save_ifs" -- test -z "$ac_dir" && ac_dir=. -- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then -- lt_cv_path_LD="$ac_dir/$ac_prog" -- # Check to see if the program is GNU ld. I'd rather use --version, -- # but apparently some GNU ld's only accept -v. -- # Break only if it was the GNU/non-GNU ld that we prefer. -- case `"$lt_cv_path_LD" -v 2>&1 /dev/null` -+ for lt_sys_path in $lt_search_path_spec; do -+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then -+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" -+ else -+ test -d "$lt_sys_path" && \ -+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done -- IFS="$lt_save_ifs" -+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' -+BEGIN {RS=" "; FS="/|\n";} { -+ lt_foo=""; -+ lt_count=0; -+ for (lt_i = NF; lt_i > 0; lt_i--) { -+ if ($lt_i != "" && $lt_i != ".") { -+ if ($lt_i == "..") { -+ lt_count++; -+ } else { -+ if (lt_count == 0) { -+ lt_foo="/" $lt_i lt_foo; -+ } else { -+ lt_count--; -+ } -+ } -+ } -+ } -+ if (lt_foo != "") { lt_freq[[lt_foo]]++; } -+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -+}'` -+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` - else -- lt_cv_path_LD="$LD" # Let the user override the test with a path. -+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - fi]) --LD="$lt_cv_path_LD" --if test -n "$LD"; then -- AC_MSG_RESULT($LD) --else -- AC_MSG_RESULT(no) --fi --test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) --AC_PROG_LD_GNU --])# AC_PROG_LD -- -- --# AC_PROG_LD_GNU --# -------------- --AC_DEFUN([AC_PROG_LD_GNU], --[AC_REQUIRE([AC_PROG_EGREP])dnl --AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, --[# I'd rather use --version here, but apparently some GNU ld's only accept -v. --case `$LD -v 2>&1 /dev/null; then -- case $host_cpu in -- i*86 ) -- # Not sure whether the presence of OpenBSD here was a mistake. -- # Let's accept both of them until this is cleared up. -- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' -- lt_cv_file_magic_cmd=/usr/bin/file -- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` -+aix[[4-9]]*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ hardcode_into_libs=yes -+ if test "$host_cpu" = ia64; then -+ # AIX 5 supports IA64 -+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ else -+ # With GCC up to 2.95.x, collect2 would create an import file -+ # for dependence libraries. The import file would start with -+ # the line `#! .'. This would cause the generated library to -+ # depend on `.', always an invalid library. This was fixed in -+ # development snapshots of GCC prior to 3.0. -+ case $host_os in -+ aix4 | aix4.[[01]] | aix4.[[01]].*) -+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' -+ echo ' yes ' -+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then -+ : -+ else -+ can_build_shared=no -+ fi - ;; - esac -- else -- lt_cv_deplibs_check_method=pass_all -+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct -+ # soname into executable. Probably we can add versioning support to -+ # collect2, so additional links can be useful in future. -+ if test "$aix_use_runtimelinking" = yes; then -+ # If using run time linking (on AIX 4.2 or later) use lib.so -+ # instead of lib.a to let people know that these are not -+ # typical AIX shared libraries. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ else -+ # We preserve .a as extension for shared libraries through AIX4.2 -+ # and later when we are not doing run time linking. -+ library_names_spec='${libname}${release}.a $libname.a' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ fi -+ shlibpath_var=LIBPATH - fi - ;; - --gnu*) -- lt_cv_deplibs_check_method=pass_all -- ;; -- --hpux10.20* | hpux11*) -- lt_cv_file_magic_cmd=/usr/bin/file -- case "$host_cpu" in -- ia64*) -- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' -- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so -- ;; -- hppa*64*) -- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] -- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl -+amigaos*) -+ case $host_cpu in -+ powerpc) -+ # Since July 2007 AmigaOS4 officially supports .so libraries. -+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; -- *) -- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' -- lt_cv_file_magic_test_file=/usr/lib/libc.sl -+ m68k) -+ library_names_spec='$libname.ixlibrary $libname.a' -+ # Create ${libname}_ixlibrary.a entries in /sys/libs. -+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/$[[^/]]*$\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - --irix5* | irix6* | nonstopux*) -- case $LD in -- *-32|*"-32 ") libmagic=32-bit;; -- *-n32|*"-n32 ") libmagic=N32;; -- *-64|*"-64 ") libmagic=64-bit;; -- *) libmagic=never-match;; -- esac -- lt_cv_deplibs_check_method=pass_all -- ;; -- --# This must be Linux ELF. --linux*) -- case $host_cpu in -- alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*|x86_64*) -- lt_cv_deplibs_check_method=pass_all ;; -- *) -- # glibc up to 2.1.1 does not perform some relocations on ARM -- # this will be overridden with pass_all, but let us keep it just in case -- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; -- esac -- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` -- lt_cv_deplibs_check_method=pass_all -+beos*) -+ library_names_spec='${libname}${shared_ext}' -+ dynamic_linker="$host_os ld.so" -+ shlibpath_var=LIBRARY_PATH - ;; - --netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then -- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' -- else -- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' -- fi -+bsdi[[45]]*) -+ version_type=linux -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" -+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" -+ # the default ld.so.conf also contains /usr/contrib/lib and -+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow -+ # libtool to hard-code these into programs - ;; - --newos6*) -- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' -- lt_cv_file_magic_cmd=/usr/bin/file -- lt_cv_file_magic_test_file=/usr/lib/libnls.so -- ;; -+cygwin* | mingw* | pw32* | cegcc*) -+ version_type=windows -+ shrext_cmds=".dll" -+ need_version=no -+ need_lib_prefix=no - --nto-qnx*) -- lt_cv_deplibs_check_method=unknown -- ;; -+ case $GCC,$host_os in -+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) -+ library_names_spec='$libname.dll.a' -+ # DLL is installed to $(libdir)/../bin by postinstall_cmds -+ postinstall_cmds='base_file=`basename \${file}`~ -+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ -+ dldir=$destdir/`dirname \$dlpath`~ -+ test -d \$dldir || mkdir -p \$dldir~ -+ $install_prog $dir/$dlname \$dldir/$dlname~ -+ chmod a+x \$dldir/$dlname~ -+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then -+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; -+ fi' -+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ -+ dlpath=$dir/\$dldll~ -+ $RM \$dlpath' -+ shlibpath_overrides_runpath=yes - --openbsd*) -- lt_cv_file_magic_cmd=/usr/bin/file -- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` -- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' -- else -- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' -- fi -+ case $host_os in -+ cygwin*) -+ # Cygwin DLLs use 'cyg' prefix rather than 'lib' -+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" -+ ;; -+ mingw* | cegcc*) -+ # MinGW DLLs use traditional 'lib' prefix -+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then -+ # It is most probably a Windows format PATH printed by -+ # mingw gcc, but we are running on Cygwin. Gcc prints its search -+ # path with ; separators, and with drive letters. We can handle the -+ # drive letters (cygwin fileutils understands them), so leave them, -+ # especially as we might pass files found there to a mingw objdump, -+ # which wouldn't understand a cygwinified path. Ahh. -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -+ else -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ fi -+ ;; -+ pw32*) -+ # pw32 DLLs use 'pw' prefix rather than 'lib' -+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -+ ;; -+ esac -+ ;; -+ -+ *) -+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' -+ ;; -+ esac -+ dynamic_linker='Win32 ld.exe' -+ # FIXME: first we should search . and the directory the executable is in -+ shlibpath_var=PATH - ;; - --osf3* | osf4* | osf5*) -- lt_cv_deplibs_check_method=pass_all -+darwin* | rhapsody*) -+ dynamic_linker="$host_os dyld" -+ version_type=darwin -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' -+ soname_spec='${libname}${release}${major}$shared_ext' -+ shlibpath_overrides_runpath=yes -+ shlibpath_var=DYLD_LIBRARY_PATH -+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' -+m4_if([$1], [],[ -+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) -+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - --sco3.2v5*) -- lt_cv_deplibs_check_method=pass_all -+dgux*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH - ;; - --solaris*) -- lt_cv_deplibs_check_method=pass_all -+freebsd1*) -+ dynamic_linker=no - ;; - --sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -- case $host_vendor in -- motorola) -- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' -- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` -- ;; -- ncr) -- lt_cv_deplibs_check_method=pass_all -+freebsd* | dragonfly*) -+ # DragonFly does not have aout. When/if they implement a new -+ # versioning mechanism, adjust this. -+ if test -x /usr/bin/objformat; then -+ objformat=`/usr/bin/objformat` -+ else -+ case $host_os in -+ freebsd[[123]]*) objformat=aout ;; -+ *) objformat=elf ;; -+ esac -+ fi -+ version_type=freebsd-$objformat -+ case $version_type in -+ freebsd-elf*) -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -+ need_version=no -+ need_lib_prefix=no -+ ;; -+ freebsd-*) -+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' -+ need_version=yes -+ ;; -+ esac -+ shlibpath_var=LD_LIBRARY_PATH -+ case $host_os in -+ freebsd2*) -+ shlibpath_overrides_runpath=yes - ;; -- sequent) -- lt_cv_file_magic_cmd='/bin/file' -- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' -+ freebsd3.[[01]]* | freebsdelf3.[[01]]*) -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes - ;; -- sni) -- lt_cv_file_magic_cmd='/bin/file' -- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" -- lt_cv_file_magic_test_file=/lib/libc.so -+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ -+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes - ;; -- siemens) -- lt_cv_deplibs_check_method=pass_all -+ *) # from 4.6 on, and DragonFly -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes - ;; - esac - ;; - --sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) -- lt_cv_deplibs_check_method=pass_all -+gnu*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ hardcode_into_libs=yes - ;; --esac --]) --file_magic_cmd=$lt_cv_file_magic_cmd --deplibs_check_method=$lt_cv_deplibs_check_method --test -z "$deplibs_check_method" && deplibs_check_method=unknown --])# AC_DEPLIBS_CHECK_METHOD -- - --# AC_PROG_NM --# ---------- --# find the pathname to a BSD-compatible name lister --AC_DEFUN([AC_PROG_NM], --[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, --[if test -n "$NM"; then -- # Let the user override the test. -- lt_cv_path_NM="$NM" --else -- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do -- IFS="$lt_save_ifs" -- test -z "$ac_dir" && ac_dir=. -- tmp_nm="$ac_dir/${ac_tool_prefix}nm" -- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then -- # Check to see if the nm accepts a BSD-compat flag. -- # Adding the `sed 1q' prevents false positives on HP-UX, which says: -- # nm: unknown option "B" ignored -- # Tru64's nm complains that /dev/null is an invalid object file -- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in -- */dev/null* | *'Invalid file or object type'*) -- lt_cv_path_NM="$tmp_nm -B" -- break -- ;; -- *) -- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in -- */dev/null*) -- lt_cv_path_NM="$tmp_nm -p" -- break -- ;; -- *) -- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but -- continue # so that we can try to find one that supports BSD flags -- ;; -- esac -- esac -+hpux9* | hpux10* | hpux11*) -+ # Give a soname corresponding to the major version so that dld.sl refuses to -+ # link against other versions. -+ version_type=sunos -+ need_lib_prefix=no -+ need_version=no -+ case $host_cpu in -+ ia64*) -+ shrext_cmds='.so' -+ hardcode_into_libs=yes -+ dynamic_linker="$host_os dld.so" -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ if test "X$HPUX_IA64_MODE" = X32; then -+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" -+ else -+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi -- done -- IFS="$lt_save_ifs" -- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm --fi]) --NM="$lt_cv_path_NM" --])# AC_PROG_NM -- -+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -+ ;; -+ hppa*64*) -+ shrext_cmds='.sl' -+ hardcode_into_libs=yes -+ dynamic_linker="$host_os dld.sl" -+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH -+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" -+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -+ ;; -+ *) -+ shrext_cmds='.sl' -+ dynamic_linker="$host_os dld.sl" -+ shlibpath_var=SHLIB_PATH -+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ ;; -+ esac -+ # HP-UX runs *really* slowly unless shared libraries are mode 555. -+ postinstall_cmds='chmod 555 $lib' -+ ;; - --# AC_CHECK_LIBM --# ------------- --# check for math library --AC_DEFUN([AC_CHECK_LIBM], --[AC_REQUIRE([AC_CANONICAL_HOST])dnl --LIBM= --case $host in --*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) -- # These system don't have libm, or don't need it -+interix[[3-9]]*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes - ;; --*-ncr-sysv4.3*) -- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") -- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") -+ -+irix5* | irix6* | nonstopux*) -+ case $host_os in -+ nonstopux*) version_type=nonstopux ;; -+ *) -+ if test "$lt_cv_prog_gnu_ld" = yes; then -+ version_type=linux -+ else -+ version_type=irix -+ fi ;; -+ esac -+ need_lib_prefix=no -+ need_version=no -+ soname_spec='${libname}${release}${shared_ext}$major' -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' -+ case $host_os in -+ irix5* | nonstopux*) -+ libsuff= shlibsuff= -+ ;; -+ *) -+ case $LD in # libtool.m4 will add one of these switches to LD -+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") -+ libsuff= shlibsuff= libmagic=32-bit;; -+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") -+ libsuff=32 shlibsuff=N32 libmagic=N32;; -+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") -+ libsuff=64 shlibsuff=64 libmagic=64-bit;; -+ *) libsuff= shlibsuff= libmagic=never-match;; -+ esac -+ ;; -+ esac -+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH -+ shlibpath_overrides_runpath=no -+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" -+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" -+ hardcode_into_libs=yes - ;; --*) -- AC_CHECK_LIB(m, cos, LIBM="-lm") -+ -+# No shared lib support for Linux oldld, aout, or coff. -+linux*oldld* | linux*aout* | linux*coff*) -+ dynamic_linker=no - ;; --esac --])# AC_CHECK_LIBM - -+# This must be Linux ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ # Some binutils ld are patched to set DT_RUNPATH -+ save_LDFLAGS=$LDFLAGS -+ save_libdir=$libdir -+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ -+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" -+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], -+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], -+ [shlibpath_overrides_runpath=yes])]) -+ LDFLAGS=$save_LDFLAGS -+ libdir=$save_libdir - --# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) --# ----------------------------------- --# sets LIBLTDL to the link flags for the libltdl convenience library and --# LTDLINCL to the include flags for the libltdl header and adds --# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL --# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If --# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will --# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with --# '${top_srcdir}/' (note the single quotes!). If your package is not --# flat and you're not using automake, define top_builddir and --# top_srcdir appropriately in the Makefiles. --AC_DEFUN([AC_LIBLTDL_CONVENIENCE], --[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -- case $enable_ltdl_convenience in -- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; -- "") enable_ltdl_convenience=yes -- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; -- esac -- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la -- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) -- # For backwards non-gettext consistent compatibility... -- INCLTDL="$LTDLINCL" --])# AC_LIBLTDL_CONVENIENCE -- -+ # This implies no fast_install, which is unacceptable. -+ # Some rework will be needed to allow for fast_install -+ # before this can be enabled. -+ hardcode_into_libs=yes - --# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) --# ----------------------------------- --# sets LIBLTDL to the link flags for the libltdl installable library and --# LTDLINCL to the include flags for the libltdl header and adds --# --enable-ltdl-install to the configure arguments. Note that LIBLTDL --# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If --# DIRECTORY is not provided and an installed libltdl is not found, it is --# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' --# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single --# quotes!). If your package is not flat and you're not using automake, --# define top_builddir and top_srcdir appropriately in the Makefiles. --# In the future, this macro may have to be called after AC_PROG_LIBTOOL. --AC_DEFUN([AC_LIBLTDL_INSTALLABLE], --[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -- AC_CHECK_LIB(ltdl, lt_dlinit, -- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], -- [if test x"$enable_ltdl_install" = xno; then -- AC_MSG_WARN([libltdl not installed, but installation disabled]) -- else -- enable_ltdl_install=yes -- fi -- ]) -- if test x"$enable_ltdl_install" = x"yes"; then -- ac_configure_args="$ac_configure_args --enable-ltdl-install" -- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la -- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) -- else -- ac_configure_args="$ac_configure_args --enable-ltdl-install=no" -- LIBLTDL="-lltdl" -- LTDLINCL= -+ # Append ld.so.conf contents to the search path -+ if test -f /etc/ld.so.conf; then -+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` -+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi -- # For backwards non-gettext consistent compatibility... -- INCLTDL="$LTDLINCL" --])# AC_LIBLTDL_INSTALLABLE -- -- --# AC_LIBTOOL_CXX --# -------------- --# enable support for C++ libraries --AC_DEFUN([AC_LIBTOOL_CXX], --[AC_REQUIRE([_LT_AC_LANG_CXX]) --])# AC_LIBTOOL_CXX -- -- --# _LT_AC_LANG_CXX --# --------------- --AC_DEFUN([_LT_AC_LANG_CXX], --[AC_REQUIRE([AC_PROG_CXX]) --AC_REQUIRE([AC_PROG_CXXCPP]) --_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) --])# _LT_AC_LANG_CXX -- -- --# AC_LIBTOOL_F77 --# -------------- --# enable support for Fortran 77 libraries --AC_DEFUN([AC_LIBTOOL_F77], --[AC_REQUIRE([_LT_AC_LANG_F77]) --])# AC_LIBTOOL_F77 -- -- --# _LT_AC_LANG_F77 --# --------------- --AC_DEFUN([_LT_AC_LANG_F77], --[AC_REQUIRE([AC_PROG_F77]) --_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) --])# _LT_AC_LANG_F77 -- -- --# AC_LIBTOOL_GCJ --# -------------- --# enable support for GCJ libraries --AC_DEFUN([AC_LIBTOOL_GCJ], --[AC_REQUIRE([_LT_AC_LANG_GCJ]) --])# AC_LIBTOOL_GCJ -- -- --# _LT_AC_LANG_GCJ --# --------------- --AC_DEFUN([_LT_AC_LANG_GCJ], --[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], -- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], -- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], -- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], -- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], -- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) --_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) --])# _LT_AC_LANG_GCJ -- - --# AC_LIBTOOL_RC --# -------------- --# enable support for Windows resource files --AC_DEFUN([AC_LIBTOOL_RC], --[AC_REQUIRE([LT_AC_PROG_RC]) --_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) --])# AC_LIBTOOL_RC -- -- --# AC_LIBTOOL_LANG_C_CONFIG --# ------------------------ --# Ensure that the configuration vars for the C compiler are --# suitably defined. Those variables are subsequently used by --# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. --AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) --AC_DEFUN([_LT_AC_LANG_C_CONFIG], --[lt_save_CC="$CC" --AC_LANG_PUSH(C) -- --# Source file extension for C test sources. --ac_ext=c -+ # We used to test for /lib/ld.so.1 and disable shared libraries on -+ # powerpc, because MkLinux only supported shared libraries with the -+ # GNU dynamic linker. Since this was broken with cross compilers, -+ # most powerpc-linux boxes support dynamic linking these days and -+ # people can always --disable-shared, the test was removed, and we -+ # assume the GNU/Linux dynamic linker is in use. -+ dynamic_linker='GNU/Linux ld.so' -+ ;; - --# Object file extension for compiled C test sources. --objext=o --_LT_AC_TAGVAR(objext, $1)=$objext -+netbsdelf*-gnu) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ dynamic_linker='NetBSD ld.elf_so' -+ ;; - --# Code to be used in simple compile tests --lt_simple_compile_test_code="int some_variable = 0;\n" -+netbsd*) -+ version_type=sunos -+ need_lib_prefix=no -+ need_version=no -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -+ dynamic_linker='NetBSD (a.out) ld.so' -+ else -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ dynamic_linker='NetBSD ld.elf_so' -+ fi -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ ;; - --# Code to be used in simple link tests --lt_simple_link_test_code='int main(){return(0);}\n' -+newsos6) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ ;; - --_LT_AC_SYS_COMPILER -+*nto* | *qnx*) -+ version_type=qnx -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ dynamic_linker='ldqnx.so' -+ ;; - --# --# Check for any special shared library compilation flags. --# --_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= --if test "$GCC" = no; then -+openbsd*) -+ version_type=sunos -+ sys_lib_dlsearch_path_spec="/usr/lib" -+ need_lib_prefix=no -+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in -- sco3.2v5*) -- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' -- ;; -+ openbsd3.3 | openbsd3.3.*) need_version=yes ;; -+ *) need_version=no ;; - esac --fi --if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then -- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) -- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ case $host_os in -+ openbsd2.[[89]] | openbsd2.[[89]].*) -+ shlibpath_overrides_runpath=no -+ ;; -+ *) -+ shlibpath_overrides_runpath=yes -+ ;; -+ esac - else -- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) -- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no -+ shlibpath_overrides_runpath=yes - fi --fi -+ ;; - -+os2*) -+ libname_spec='$name' -+ shrext_cmds=".dll" -+ need_lib_prefix=no -+ library_names_spec='$libname${shared_ext} $libname.a' -+ dynamic_linker='OS/2 ld.exe' -+ shlibpath_var=LIBPATH -+ ;; - --# --# Check to make sure the static flag actually works. --# --AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], -- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), -- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), -- [], -- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) -+osf3* | osf4* | osf5*) -+ version_type=osf -+ need_lib_prefix=no -+ need_version=no -+ soname_spec='${libname}${release}${shared_ext}$major' -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" -+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" -+ ;; - -+rdos*) -+ dynamic_linker=no -+ ;; - --AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) --AC_LIBTOOL_PROG_COMPILER_PIC($1) --AC_LIBTOOL_PROG_CC_C_O($1) --AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) --AC_LIBTOOL_PROG_LD_SHLIBS($1) --AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) --AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) --AC_LIBTOOL_SYS_LIB_STRIP --AC_LIBTOOL_DLOPEN_SELF($1) -- --# Report which librarie types wil actually be built --AC_MSG_CHECKING([if libtool supports shared libraries]) --AC_MSG_RESULT([$can_build_shared]) -- --AC_MSG_CHECKING([whether to build shared libraries]) --test "$can_build_shared" = "no" && enable_shared=no -- --# On AIX, shared libraries and static libraries use the same namespace, and --# are all built from PIC. --case "$host_os" in --aix3*) -- test "$enable_shared" = yes && enable_static=no -- if test -n "$RANLIB"; then -- archive_cmds="$archive_cmds~\$RANLIB \$lib" -- postinstall_cmds='$RANLIB $lib' -- fi -+solaris*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ # ldd complains unless libraries are executable -+ postinstall_cmds='chmod +x $lib' - ;; - --aix4* | aix5*) -- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then -- test "$enable_shared" = yes && enable_static=no -+sunos4*) -+ version_type=sunos -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ if test "$with_gnu_ld" = yes; then -+ need_lib_prefix=no - fi -+ need_version=yes - ;; -- darwin* | rhapsody*) -- if test "$GCC" = yes; then -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -- case "$host_os" in -- rhapsody* | darwin1.[[012]]) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' -+ -+sysv4 | sysv4.3*) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ case $host_vendor in -+ sni) -+ shlibpath_overrides_runpath=no -+ need_lib_prefix=no -+ runpath_var=LD_RUN_PATH - ;; -- *) # Darwin 1.3 on -- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' -- else -- case ${MACOSX_DEPLOYMENT_TARGET} in -- 10.[[012]]) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' -- ;; -- 10.*) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' -- ;; -- esac -- fi -+ siemens) -+ need_lib_prefix=no - ;; -- esac -- output_verbose_link_cmd='echo' -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' -- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' -- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- _LT_AC_TAGVAR(hardcode_direct, $1)=no -- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' -- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes -- else -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; --esac --AC_MSG_RESULT([$enable_shared]) -+ motorola) -+ need_lib_prefix=no -+ need_version=no -+ shlibpath_overrides_runpath=no -+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' -+ ;; -+ esac -+ ;; - --AC_MSG_CHECKING([whether to build static libraries]) --# Make sure either enable_shared or enable_static is yes. --test "$enable_shared" = yes || enable_static=yes --AC_MSG_RESULT([$enable_static]) -+sysv4*MP*) -+ if test -d /usr/nec ;then -+ version_type=linux -+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' -+ soname_spec='$libname${shared_ext}.$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ fi -+ ;; - --AC_LIBTOOL_CONFIG($1) -+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) -+ version_type=freebsd-elf -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ if test "$with_gnu_ld" = yes; then -+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' -+ else -+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' -+ case $host_os in -+ sco3.2v5*) -+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" -+ ;; -+ esac -+ fi -+ sys_lib_dlsearch_path_spec='/usr/lib' -+ ;; - --AC_LANG_POP --CC="$lt_save_CC" --])# AC_LIBTOOL_LANG_C_CONFIG -+tpf*) -+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; - -+uts4*) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ ;; - --# AC_LIBTOOL_LANG_CXX_CONFIG --# -------------------------- --# Ensure that the configuration vars for the C compiler are --# suitably defined. Those variables are subsequently used by --# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. --AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) --AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], --[AC_LANG_PUSH(C++) --AC_REQUIRE([AC_PROG_CXX]) --AC_REQUIRE([AC_PROG_CXXCPP]) -- --_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no --_LT_AC_TAGVAR(allow_undefined_flag, $1)= --_LT_AC_TAGVAR(always_export_symbols, $1)=no --_LT_AC_TAGVAR(archive_expsym_cmds, $1)= --_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= --_LT_AC_TAGVAR(hardcode_direct, $1)=no --_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= --_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= --_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= --_LT_AC_TAGVAR(hardcode_minus_L, $1)=no --_LT_AC_TAGVAR(hardcode_automatic, $1)=no --_LT_AC_TAGVAR(module_cmds, $1)= --_LT_AC_TAGVAR(module_expsym_cmds, $1)= --_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown --_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds --_LT_AC_TAGVAR(no_undefined_flag, $1)= --_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= --_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no -+*) -+ dynamic_linker=no -+ ;; -+esac -+AC_MSG_RESULT([$dynamic_linker]) -+test "$dynamic_linker" = no && can_build_shared=no - --# Dependencies to place before and after the object being linked: --_LT_AC_TAGVAR(predep_objects, $1)= --_LT_AC_TAGVAR(postdep_objects, $1)= --_LT_AC_TAGVAR(predeps, $1)= --_LT_AC_TAGVAR(postdeps, $1)= --_LT_AC_TAGVAR(compiler_lib_search_path, $1)= -+variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -+if test "$GCC" = yes; then -+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -+fi - --# Source file extension for C++ test sources. --ac_ext=cc -+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then -+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -+fi -+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then -+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -+fi - --# Object file extension for compiled C++ test sources. --objext=o --_LT_AC_TAGVAR(objext, $1)=$objext -+_LT_DECL([], [variables_saved_for_relink], [1], -+ [Variables whose values should be saved in libtool wrapper scripts and -+ restored at link time]) -+_LT_DECL([], [need_lib_prefix], [0], -+ [Do we need the "lib" prefix for modules?]) -+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) -+_LT_DECL([], [version_type], [0], [Library versioning type]) -+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) -+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) -+_LT_DECL([], [shlibpath_overrides_runpath], [0], -+ [Is shlibpath searched before the hard-coded library search path?]) -+_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) -+_LT_DECL([], [library_names_spec], [1], -+ [[List of archive names. First name is the real one, the rest are links. -+ The last name is the one that the linker finds with -lNAME]]) -+_LT_DECL([], [soname_spec], [1], -+ [[The coded name of the library, if different from the real name]]) -+_LT_DECL([], [postinstall_cmds], [2], -+ [Command to use after installation of a shared archive]) -+_LT_DECL([], [postuninstall_cmds], [2], -+ [Command to use after uninstallation of a shared archive]) -+_LT_DECL([], [finish_cmds], [2], -+ [Commands used to finish a libtool library installation in a directory]) -+_LT_DECL([], [finish_eval], [1], -+ [[As "finish_cmds", except a single script fragment to be evaled but -+ not shown]]) -+_LT_DECL([], [hardcode_into_libs], [0], -+ [Whether we should hardcode library paths into libraries]) -+_LT_DECL([], [sys_lib_search_path_spec], [2], -+ [Compile-time system search path for libraries]) -+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], -+ [Run-time system search path for libraries]) -+])# _LT_SYS_DYNAMIC_LINKER - --# Code to be used in simple compile tests --lt_simple_compile_test_code="int some_variable = 0;\n" - --# Code to be used in simple link tests --lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' -+# _LT_PATH_TOOL_PREFIX(TOOL) -+# -------------------------- -+# find a file program which can recognize shared library -+AC_DEFUN([_LT_PATH_TOOL_PREFIX], -+[m4_require([_LT_DECL_EGREP])dnl -+AC_MSG_CHECKING([for $1]) -+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -+[case $MAGIC_CMD in -+[[\\/*] | ?:[\\/]*]) -+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. -+ ;; -+*) -+ lt_save_MAGIC_CMD="$MAGIC_CMD" -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+dnl $ac_dummy forces splitting on constant user-supplied paths. -+dnl POSIX.2 word splitting is done only on the output of word expansions, -+dnl not every word. This closes a longstanding sh security hole. -+ ac_dummy="m4_if([$2], , $PATH, [$2])" -+ for ac_dir in $ac_dummy; do -+ IFS="$lt_save_ifs" -+ test -z "$ac_dir" && ac_dir=. -+ if test -f $ac_dir/$1; then -+ lt_cv_path_MAGIC_CMD="$ac_dir/$1" -+ if test -n "$file_magic_test_file"; then -+ case $deplibs_check_method in -+ "file_magic "*) -+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"` -+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | -+ $EGREP "$file_magic_regex" > /dev/null; then -+ : -+ else -+ cat <<_LT_EOF 1>&2 - --# ltmain only uses $CC for tagged configurations so make sure $CC is set. --_LT_AC_SYS_COMPILER -+*** Warning: the command libtool uses to detect shared libraries, -+*** $file_magic_cmd, produces output that libtool cannot recognize. -+*** The result is that libtool may fail to recognize shared libraries -+*** as such. This will affect the creation of libtool libraries that -+*** depend on shared libraries, but programs linked with such libtool -+*** libraries will work regardless of this problem. Nevertheless, you -+*** may want to report the problem to your system manager and/or to -+*** bug-libtool@gnu.org - --# Allow CC to be a program name with arguments. --lt_save_CC=$CC --lt_save_LD=$LD --lt_save_GCC=$GCC --GCC=$GXX --lt_save_with_gnu_ld=$with_gnu_ld --lt_save_path_LD=$lt_cv_path_LD --if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then -- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx --else -- unset lt_cv_prog_gnu_ld --fi --if test -n "${lt_cv_path_LDCXX+set}"; then -- lt_cv_path_LD=$lt_cv_path_LDCXX -+_LT_EOF -+ fi ;; -+ esac -+ fi -+ break -+ fi -+ done -+ IFS="$lt_save_ifs" -+ MAGIC_CMD="$lt_save_MAGIC_CMD" -+ ;; -+esac]) -+MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -+if test -n "$MAGIC_CMD"; then -+ AC_MSG_RESULT($MAGIC_CMD) - else -- unset lt_cv_path_LD -+ AC_MSG_RESULT(no) - fi --test -z "${LDCXX+set}" || LD=$LDCXX --CC=${CXX-"c++"} --compiler=$CC --_LT_AC_TAGVAR(compiler, $1)=$CC --cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` -+_LT_DECL([], [MAGIC_CMD], [0], -+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl -+])# _LT_PATH_TOOL_PREFIX - --# We don't want -fno-exception wen compiling C++ code, so set the --# no_builtin_flag separately --if test "$GXX" = yes; then -- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' --else -- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= --fi -+# Old name: -+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) - --if test "$GXX" = yes; then -- # Set up default GNU C++ configuration - -- AC_PROG_LD -+# _LT_PATH_MAGIC -+# -------------- -+# find a file program which can recognize a shared library -+m4_defun([_LT_PATH_MAGIC], -+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -+if test -z "$lt_cv_path_MAGIC_CMD"; then -+ if test -n "$ac_tool_prefix"; then -+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) -+ else -+ MAGIC_CMD=: -+ fi -+fi -+])# _LT_PATH_MAGIC - -- # Check if GNU C++ uses GNU ld as the underlying linker, since the -- # archiving commands below assume that GNU ld is being used. -- if test "$with_gnu_ld" = yes; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+# LT_PATH_LD -+# ---------- -+# find the pathname to the GNU or non-GNU linker -+AC_DEFUN([LT_PATH_LD], -+[AC_REQUIRE([AC_PROG_CC])dnl -+AC_REQUIRE([AC_CANONICAL_HOST])dnl -+AC_REQUIRE([AC_CANONICAL_BUILD])dnl -+m4_require([_LT_DECL_SED])dnl -+m4_require([_LT_DECL_EGREP])dnl - -- # If archive_cmds runs LD, not CC, wlarc should be empty -- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to -- # investigate it a little bit more. (MM) -- wlarc='${wl}' -+AC_ARG_WITH([gnu-ld], -+ [AS_HELP_STRING([--with-gnu-ld], -+ [assume the C compiler uses GNU ld @<:@default=no@:>@])], -+ [test "$withval" = no || with_gnu_ld=yes], -+ [with_gnu_ld=no])dnl - -- # ancient GNU ld didn't support --whole-archive et. al. -- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ -- grep 'no-whole-archive' > /dev/null; then -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -- else -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= -+ac_prog=ld -+if test "$GCC" = yes; then -+ # Check if gcc -print-prog-name=ld gives a path. -+ AC_MSG_CHECKING([for ld used by $CC]) -+ case $host in -+ *-*-mingw*) -+ # gcc leaves a trailing carriage return which upsets mingw -+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; -+ *) -+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; -+ esac -+ case $ac_prog in -+ # Accept absolute paths. -+ [[\\/]]* | ?:[[\\/]]*) -+ re_direlt='/[[^/]][[^/]]*/\.\./' -+ # Canonicalize the pathname of ld -+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` -+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do -+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` -+ done -+ test -z "$LD" && LD="$ac_prog" -+ ;; -+ "") -+ # If it fails, then pretend we aren't using GCC. -+ ac_prog=ld -+ ;; -+ *) -+ # If it is relative, then search for the first ld in PATH. -+ with_gnu_ld=unknown -+ ;; -+ esac -+elif test "$with_gnu_ld" = yes; then -+ AC_MSG_CHECKING([for GNU ld]) -+else -+ AC_MSG_CHECKING([for non-GNU ld]) -+fi -+AC_CACHE_VAL(lt_cv_path_LD, -+[if test -z "$LD"; then -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+ for ac_dir in $PATH; do -+ IFS="$lt_save_ifs" -+ test -z "$ac_dir" && ac_dir=. -+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then -+ lt_cv_path_LD="$ac_dir/$ac_prog" -+ # Check to see if the program is GNU ld. I'd rather use --version, -+ # but apparently some variants of GNU ld only accept -v. -+ # Break only if it was the GNU/non-GNU ld that we prefer. -+ case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null -- then -- # We have reworked collect2 -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- else -- # We have old collect2 -- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported -- # It fails to find uninstalled libraries when the uninstalled -- # path is not listed in the libpath. Setting hardcode_minus_L -- # to unsupported forces relinking -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -- fi -- esac -- shared_flag='-shared' -+# _LT_CMD_RELOAD -+# -------------- -+# find reload flag for linker -+# -- PORTME Some linkers may need a different reload flag. -+m4_defun([_LT_CMD_RELOAD], -+[AC_CACHE_CHECK([for $LD option to reload object files], -+ lt_cv_ld_reload_flag, -+ [lt_cv_ld_reload_flag='-r']) -+reload_flag=$lt_cv_ld_reload_flag -+case $reload_flag in -+"" | " "*) ;; -+*) reload_flag=" $reload_flag" ;; -+esac -+reload_cmds='$LD$reload_flag -o $output$reload_objs' -+case $host_os in -+ darwin*) -+ if test "$GCC" = yes; then -+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else -- # not using gcc -- if test "$host_cpu" = ia64; then -- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release -- # chokes on -Wl,-G. The following line is correct: -- shared_flag='-G' -- else -- if test "$aix_use_runtimelinking" = yes; then -- shared_flag='${wl}-G' -- else -- shared_flag='${wl}-bM:SRE' -- fi -- fi -+ reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi -+ ;; -+esac -+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl -+_LT_DECL([], [reload_cmds], [2])dnl -+])# _LT_CMD_RELOAD - -- # It seems that -bexpall does not export symbols beginning with -- # underscore (_), so it is better to generate a list of symbols to export. -- _LT_AC_TAGVAR(always_export_symbols, $1)=yes -- if test "$aix_use_runtimelinking" = yes; then -- # Warning - without using the other runtime loading flags (-brtl), -- # -berok will link without error, but may produce a broken library. -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' -- # Determine the default libpath from the value encoded in an empty executable. -- _LT_AC_SYS_LIBPATH_AIX -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" -- else -- if test "$host_cpu" = ia64; then -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' -- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" -- else -- # Determine the default libpath from the value encoded in an empty executable. -- _LT_AC_SYS_LIBPATH_AIX -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -- # Warning - without using the other run time loading flags, -- # -berok will link without error, but may produce a broken library. -- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' -- # -bexpall does not export symbols beginning with underscore (_) -- _LT_AC_TAGVAR(always_export_symbols, $1)=yes -- # Exported symbols can be pulled into shared objects from archives -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes -- # This is similar to how AIX traditionally builds it's shared libraries. -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -- fi -- fi -- ;; -- chorus*) -- case $cc_basename in -- *) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- esac -- ;; -+# _LT_CHECK_MAGIC_METHOD -+# ---------------------- -+# how to check for library dependencies -+# -- PORTME fill in with the dynamic library characteristics -+m4_defun([_LT_CHECK_MAGIC_METHOD], -+[m4_require([_LT_DECL_EGREP]) -+m4_require([_LT_DECL_OBJDUMP]) -+AC_CACHE_CHECK([how to recognize dependent libraries], -+lt_cv_deplibs_check_method, -+[lt_cv_file_magic_cmd='$MAGIC_CMD' -+lt_cv_file_magic_test_file= -+lt_cv_deplibs_check_method='unknown' -+# Need to set the preceding variable on all platforms that support -+# interlibrary dependencies. -+# 'none' -- dependencies not supported. -+# `unknown' -- same as none, but documents that we really don't know. -+# 'pass_all' -- all dependencies passed with no checks. -+# 'test_compile' -- check by making test program. -+# 'file_magic [[regex]]' -- check by looking for files in library path -+# which responds to the $file_magic_cmd with a given extended regex. -+# If you have `file' or equivalent on your system and you're not sure -+# whether `pass_all' will *always* work, you probably want this one. - -- cygwin* | mingw* | pw32*) -- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, -- # as there is no search path for DLLs. -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported -- _LT_AC_TAGVAR(always_export_symbols, $1)=no -- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -- -- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- # If the export-symbols file already is a .def file (1st line -- # is EXPORTS), use it as is; otherwise, prepend... -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -- cp $export_symbols $output_objdir/$soname.def; -- else -- echo EXPORTS > $output_objdir/$soname.def; -- cat $export_symbols >> $output_objdir/$soname.def; -- fi~ -- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- else -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -+case $host_os in -+aix[[4-9]]*) -+ lt_cv_deplibs_check_method=pass_all - ;; - -- darwin* | rhapsody*) -- if test "$GXX" = yes; then -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -- case "$host_os" in -- rhapsody* | darwin1.[[012]]) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' -- ;; -- *) # Darwin 1.3 on -- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' -- else -- case ${MACOSX_DEPLOYMENT_TARGET} in -- 10.[[012]]) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' -- ;; -- 10.*) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' -- ;; -- esac -- fi -- ;; -- esac -- lt_int_apple_cc_single_mod=no -- output_verbose_link_cmd='echo' -- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then -- lt_int_apple_cc_single_mod=yes -- fi -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' -- else -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' -- fi -- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' -+beos*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - -- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- else -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- fi -- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- _LT_AC_TAGVAR(hardcode_direct, $1)=no -- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' -- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes -- else -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; -+bsdi[[45]]*) -+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' -+ lt_cv_file_magic_cmd='/usr/bin/file -L' -+ lt_cv_file_magic_test_file=/shlib/libc.so -+ ;; - -- dgux*) -- case $cc_basename in -- ec++) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- ghcx) -- # Green Hills C++ Compiler -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- *) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- esac -- ;; -- freebsd[12]*) -- # C++ shared libraries reported to be fairly broken before switch to ELF -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- freebsd-elf*) -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -- ;; -- freebsd* | kfreebsd*-gnu) -- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF -- # conventions -- _LT_AC_TAGVAR(ld_shlibs, $1)=yes -- ;; -- gnu*) -- ;; -- hpux9*) -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, -- # but as the default -- # location of the library. -- -- case $cc_basename in -- CC) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- aCC) -- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- ;; -- *) -- if test "$GXX" = yes; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -- else -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; -- esac -- ;; -- hpux10*|hpux11*) -- if test $with_gnu_ld = no; then -- case "$host_cpu" in -- hppa*64*) -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- ;; -- ia64*) -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- ;; -- *) -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -- ;; -- esac -- fi -- case "$host_cpu" in -- hppa*64*) -- _LT_AC_TAGVAR(hardcode_direct, $1)=no -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; -- ia64*) -- _LT_AC_TAGVAR(hardcode_direct, $1)=no -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, -- # but as the default -- # location of the library. -- ;; -- *) -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, -- # but as the default -- # location of the library. -- ;; -- esac -+cygwin*) -+ # func_win32_libid is a shell function defined in ltmain.sh -+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' -+ lt_cv_file_magic_cmd='func_win32_libid' -+ ;; - -- case $cc_basename in -- CC) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- aCC) -- case "$host_cpu" in -- hppa*64*|ia64*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' -- ;; -- *) -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -- ;; -- esac -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- ;; -- *) -- if test "$GXX" = yes; then -- if test $with_gnu_ld = no; then -- case "$host_cpu" in -- ia64*|hppa*64*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' -- ;; -- *) -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -- ;; -- esac -- fi -- else -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; -- esac -- ;; -- irix5* | irix6*) -- case $cc_basename in -- CC) -- # SGI C++ -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' -- -- # Archives containing C++ object files must be created using -- # "CC -ar", where "CC" is the IRIX C++ compiler. This is -- # necessary to make sure instantiated templates are included -- # in the archive. -- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' -- ;; -- *) -- if test "$GXX" = yes; then -- if test "$with_gnu_ld" = no; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' -- else -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' -- fi -- fi -- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes -- ;; -- esac -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- ;; -- linux*) -- case $cc_basename in -- KCC) -- # Kuck and Associates, Inc. (KAI) C++ Compiler -- -- # KCC will only create a shared library if the output file -- # ends with ".so" (or ".sl" for HP-UX), so rename the library -- # to its proper name (with version) after linking. -- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -- -- # Archives containing C++ object files must be created using -- # "CC -Bstatic", where "CC" is the KAI C++ compiler. -- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' -- ;; -- icpc) -- # Intel C++ -- with_gnu_ld=yes -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' -- ;; -- cxx) -- # Compaq C++ -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' -+mingw* | pw32*) -+ # Base MSYS/MinGW do not provide the 'file' command needed by -+ # func_win32_libid shell function, so use a weaker test based on 'objdump', -+ # unless we find 'file', for example because we are cross-compiling. -+ if ( file / ) >/dev/null 2>&1; then -+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' -+ lt_cv_file_magic_cmd='func_win32_libid' -+ else -+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' -+ lt_cv_file_magic_cmd='$OBJDUMP -f' -+ fi -+ ;; - -- runpath_var=LD_RUN_PATH -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -+cegcc) -+ # use the weaker test based on 'objdump'. See mingw*. -+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' -+ lt_cv_file_magic_cmd='$OBJDUMP -f' -+ ;; - -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- ;; -- esac -- ;; -- lynxos*) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- m88k*) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- mvs*) -- case $cc_basename in -- cxx) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- *) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- esac -- ;; -- netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' -- wlarc= -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- fi -- # Workaround some broken pre-1.5 toolchains -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' -- ;; -- osf3*) -- case $cc_basename in -- KCC) -- # Kuck and Associates, Inc. (KAI) C++ Compiler -- -- # KCC will only create a shared library if the output file -- # ends with ".so" (or ".sl" for HP-UX), so rename the library -- # to its proper name (with version) after linking. -- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' -- -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- -- # Archives containing C++ object files must be created using -- # "CC -Bstatic", where "CC" is the KAI C++ compiler. -- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' -- -- ;; -- RCC) -- # Rational C++ 2.4.1 -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- cxx) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' -- -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- ;; -- *) -- if test "$GXX" = yes && test "$with_gnu_ld" = no; then -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' -- -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' -+darwin* | rhapsody*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - -- else -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; -+freebsd* | dragonfly*) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then -+ case $host_cpu in -+ i*86 ) -+ # Not sure whether the presence of OpenBSD here was a mistake. -+ # Let's accept both of them until this is cleared up. -+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' -+ lt_cv_file_magic_cmd=/usr/bin/file -+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` -+ ;; - esac -- ;; -- osf4* | osf5*) -- case $cc_basename in -- KCC) -- # Kuck and Associates, Inc. (KAI) C++ Compiler -- -- # KCC will only create a shared library if the output file -- # ends with ".so" (or ".sl" for HP-UX), so rename the library -- # to its proper name (with version) after linking. -- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' -- -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- -- # Archives containing C++ object files must be created using -- # the KAI C++ compiler. -- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' -- ;; -- RCC) -- # Rational C++ 2.4.1 -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- cxx) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ -- echo "-hidden">> $lib.exp~ -- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ -- $rm $lib.exp' -- -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- ;; -- *) -- if test "$GXX" = yes && test "$with_gnu_ld" = no; then -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' -- -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' -+ else -+ lt_cv_deplibs_check_method=pass_all -+ fi -+ ;; - -- else -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; -- esac -+gnu*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+hpux10.20* | hpux11*) -+ lt_cv_file_magic_cmd=/usr/bin/file -+ case $host_cpu in -+ ia64*) -+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' -+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; -- psos*) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- sco*) -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -- case $cc_basename in -- CC) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- *) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- esac -+ hppa*64*) -+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] -+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; -- sunos4*) -- case $cc_basename in -- CC) -- # Sun C++ 4.x -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- lcc) -- # Lucid -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- *) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- esac -+ *) -+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' -+ lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; -- solaris*) -- case $cc_basename in -- CC) -- # Sun C++ 4.2, 5.x and Centerline C++ -- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' -- -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- case $host_os in -- solaris2.[0-5] | solaris2.[0-5].*) ;; -- *) -- # The C++ compiler is used as linker so we must use $wl -- # flag to pass the commands to the underlying system -- # linker. -- # Supported since Solaris 2.6 (maybe 2.5.1?) -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' -- ;; -- esac -- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes -+ esac -+ ;; - -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- -- # Archives containing C++ object files must be created using -- # "CC -xar", where "CC" is the Sun C++ compiler. This is -- # necessary to make sure instantiated templates are included -- # in the archive. -- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' -- ;; -- gcx) -- # Green Hills C++ Compiler -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -+interix[[3-9]]*) -+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here -+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' -+ ;; - -- # The C++ compiler must be used to create the archive. -- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' -- ;; -- *) -- # GNU C++ compiler with Solaris linker -- if test "$GXX" = yes && test "$with_gnu_ld" = no; then -- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' -- if $CC --version | grep -v '^2\.7' > /dev/null; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' -+irix5* | irix6* | nonstopux*) -+ case $LD in -+ *-32|*"-32 ") libmagic=32-bit;; -+ *-n32|*"-n32 ") libmagic=N32;; -+ *-64|*"-64 ") libmagic=64-bit;; -+ *) libmagic=never-match;; -+ esac -+ lt_cv_deplibs_check_method=pass_all -+ ;; - -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" -- else -- # g++ 2.7 appears to require `-G' NOT `-shared' on this -- # platform. -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' -+# This must be Linux ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" -- fi -+netbsd* | netbsdelf*-gnu) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then -+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' -+ else -+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' -+ fi -+ ;; - -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' -- fi -- ;; -- esac -+newos6*) -+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' -+ lt_cv_file_magic_cmd=/usr/bin/file -+ lt_cv_file_magic_test_file=/usr/lib/libnls.so -+ ;; -+ -+*nto* | *qnx*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+openbsd*) -+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' -+ else -+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' -+ fi -+ ;; -+ -+osf3* | osf4* | osf5*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+rdos*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+solaris*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+sysv4 | sysv4.3*) -+ case $host_vendor in -+ motorola) -+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' -+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; -- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -+ ncr) -+ lt_cv_deplibs_check_method=pass_all - ;; -- tandem*) -- case $cc_basename in -- NCC) -- # NonStop-UX NCC 3.20 -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- *) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- esac -+ sequent) -+ lt_cv_file_magic_cmd='/bin/file' -+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' -+ ;; -+ sni) -+ lt_cv_file_magic_cmd='/bin/file' -+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" -+ lt_cv_file_magic_test_file=/lib/libc.so - ;; -- vxworks*) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -+ siemens) -+ lt_cv_deplibs_check_method=pass_all - ;; -- *) -- # FIXME: insert proper C++ library support -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -+ pc) -+ lt_cv_deplibs_check_method=pass_all - ;; -+ esac -+ ;; -+ -+tpf*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - esac --AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) --test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no -+]) -+file_magic_cmd=$lt_cv_file_magic_cmd -+deplibs_check_method=$lt_cv_deplibs_check_method -+test -z "$deplibs_check_method" && deplibs_check_method=unknown - --_LT_AC_TAGVAR(GCC, $1)="$GXX" --_LT_AC_TAGVAR(LD, $1)="$LD" -+_LT_DECL([], [deplibs_check_method], [1], -+ [Method to check whether dependent libraries are shared objects]) -+_LT_DECL([], [file_magic_cmd], [1], -+ [Command to use when deplibs_check_method == "file_magic"]) -+])# _LT_CHECK_MAGIC_METHOD - --AC_LIBTOOL_POSTDEP_PREDEP($1) --AC_LIBTOOL_PROG_COMPILER_PIC($1) --AC_LIBTOOL_PROG_CC_C_O($1) --AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) --AC_LIBTOOL_PROG_LD_SHLIBS($1) --AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) --AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) --AC_LIBTOOL_SYS_LIB_STRIP --AC_LIBTOOL_DLOPEN_SELF($1) - --AC_LIBTOOL_CONFIG($1) -+# LT_PATH_NM -+# ---------- -+# find the pathname to a BSD- or MS-compatible name lister -+AC_DEFUN([LT_PATH_NM], -+[AC_REQUIRE([AC_PROG_CC])dnl -+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, -+[if test -n "$NM"; then -+ # Let the user override the test. -+ lt_cv_path_NM="$NM" -+else -+ lt_nm_to_check="${ac_tool_prefix}nm" -+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then -+ lt_nm_to_check="$lt_nm_to_check nm" -+ fi -+ for lt_tmp_nm in $lt_nm_to_check; do -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do -+ IFS="$lt_save_ifs" -+ test -z "$ac_dir" && ac_dir=. -+ tmp_nm="$ac_dir/$lt_tmp_nm" -+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then -+ # Check to see if the nm accepts a BSD-compat flag. -+ # Adding the `sed 1q' prevents false positives on HP-UX, which says: -+ # nm: unknown option "B" ignored -+ # Tru64's nm complains that /dev/null is an invalid object file -+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in -+ */dev/null* | *'Invalid file or object type'*) -+ lt_cv_path_NM="$tmp_nm -B" -+ break -+ ;; -+ *) -+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in -+ */dev/null*) -+ lt_cv_path_NM="$tmp_nm -p" -+ break -+ ;; -+ *) -+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but -+ continue # so that we can try to find one that supports BSD flags -+ ;; -+ esac -+ ;; -+ esac -+ fi -+ done -+ IFS="$lt_save_ifs" -+ done -+ : ${lt_cv_path_NM=no} -+fi]) -+if test "$lt_cv_path_NM" != "no"; then -+ NM="$lt_cv_path_NM" -+else -+ # Didn't find any BSD compatible name lister, look for dumpbin. -+ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) -+ AC_SUBST([DUMPBIN]) -+ if test "$DUMPBIN" != ":"; then -+ NM="$DUMPBIN" -+ fi -+fi -+test -z "$NM" && NM=nm -+AC_SUBST([NM]) -+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl - --AC_LANG_POP --CC=$lt_save_CC --LDCXX=$LD --LD=$lt_save_LD --GCC=$lt_save_GCC --with_gnu_ldcxx=$with_gnu_ld --with_gnu_ld=$lt_save_with_gnu_ld --lt_cv_path_LDCXX=$lt_cv_path_LD --lt_cv_path_LD=$lt_save_path_LD --lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld --lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld --])# AC_LIBTOOL_LANG_CXX_CONFIG -- --# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) --# ------------------------ --# Figure out "hidden" library dependencies from verbose --# compiler output when linking a shared library. --# Parse the compiler output and extract the necessary --# objects, libraries and library flags. --AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ --dnl we can't use the lt_simple_compile_test_code here, --dnl because it contains code intended for an executable, --dnl not a library. It's possible we should let each --dnl tag define a new lt_????_link_test_code variable, --dnl but it's only used here... --ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext -+ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) -+ (eval "$ac_compile" 2>conftest.err) -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) -+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) -+ cat conftest.out >&AS_MESSAGE_LOG_FD -+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then -+ lt_cv_nm_interface="MS dumpbin" -+ fi -+ rm -f conftest*]) -+])# LT_PATH_NM -+ -+# Old names: -+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) -+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AM_PROG_NM], []) -+dnl AC_DEFUN([AC_PROG_NM], []) - -- # Sentinel used to keep track of whether or not we are before -- # the conftest object file. -- pre_test_object_deps_done=no -- -- # The `*' in the case matches for architectures that use `case' in -- # $output_verbose_cmd can trigger glob expansion during the loop -- # eval without this substitution. -- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" - -- for p in `eval $output_verbose_link_cmd`; do -- case $p in -- -- -L* | -R* | -l*) -- # Some compilers place space between "-{L,R}" and the path. -- # Remove the space. -- if test $p = "-L" \ -- || test $p = "-R"; then -- prev=$p -- continue -- else -- prev= -- fi -+# LT_LIB_M -+# -------- -+# check for math library -+AC_DEFUN([LT_LIB_M], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+LIBM= -+case $host in -+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) -+ # These system don't have libm, or don't need it -+ ;; -+*-ncr-sysv4.3*) -+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") -+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") -+ ;; -+*) -+ AC_CHECK_LIB(m, cos, LIBM="-lm") -+ ;; -+esac -+AC_SUBST([LIBM]) -+])# LT_LIB_M - -- if test "$pre_test_object_deps_done" = no; then -- case $p in -- -L* | -R*) -- # Internal compiler library paths should come after those -- # provided the user. The postdeps already come after the -- # user supplied libs so there is no need to process them. -- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then -- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" -- else -- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" -- fi -- ;; -- # The "-l" case would never come before the object being -- # linked, so don't bother handling this case. -- esac -- else -- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then -- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}" -- else -- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}" -- fi -- fi -- ;; -+# Old name: -+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_CHECK_LIBM], []) - -- *.$objext) -- # This assumes that the test object file only shows up -- # once in the compiler output. -- if test "$p" = "conftest.$objext"; then -- pre_test_object_deps_done=yes -- continue -- fi - -- if test "$pre_test_object_deps_done" = no; then -- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then -- _LT_AC_TAGVAR(predep_objects, $1)="$p" -- else -- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p" -- fi -- else -- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then -- _LT_AC_TAGVAR(postdep_objects, $1)="$p" -- else -- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p" -- fi -- fi -- ;; -+# _LT_COMPILER_NO_RTTI([TAGNAME]) -+# ------------------------------- -+m4_defun([_LT_COMPILER_NO_RTTI], -+[m4_require([_LT_TAG_COMPILER])dnl - -- *) ;; # Ignore the rest. -+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -- esac -- done -+if test "$GCC" = yes; then -+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - -- # Clean up. -- rm -f a.out a.exe --else -- echo "libtool.m4: error: problem compiling $1 test program" -+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], -+ lt_cv_prog_compiler_rtti_exceptions, -+ [-fno-rtti -fno-exceptions], [], -+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) - fi -+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], -+ [Compiler flag to turn off builtin functions]) -+])# _LT_COMPILER_NO_RTTI - --$rm -f confest.$objext -- --case " $_LT_AC_TAGVAR(postdeps, $1) " in --*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; --esac --])# AC_LIBTOOL_POSTDEP_PREDEP -- --# AC_LIBTOOL_LANG_F77_CONFIG --# ------------------------ --# Ensure that the configuration vars for the C compiler are --# suitably defined. Those variables are subsequently used by --# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. --AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) --AC_DEFUN([_LT_AC_LANG_F77_CONFIG], --[AC_REQUIRE([AC_PROG_F77]) --AC_LANG_PUSH(Fortran 77) -- --_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no --_LT_AC_TAGVAR(allow_undefined_flag, $1)= --_LT_AC_TAGVAR(always_export_symbols, $1)=no --_LT_AC_TAGVAR(archive_expsym_cmds, $1)= --_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= --_LT_AC_TAGVAR(hardcode_direct, $1)=no --_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= --_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= --_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= --_LT_AC_TAGVAR(hardcode_minus_L, $1)=no --_LT_AC_TAGVAR(hardcode_automatic, $1)=no --_LT_AC_TAGVAR(module_cmds, $1)= --_LT_AC_TAGVAR(module_expsym_cmds, $1)= --_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown --_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds --_LT_AC_TAGVAR(no_undefined_flag, $1)= --_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= --_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no -- --# Source file extension for f77 test sources. --ac_ext=f -- --# Object file extension for compiled f77 test sources. --objext=o --_LT_AC_TAGVAR(objext, $1)=$objext -- --# Code to be used in simple compile tests --lt_simple_compile_test_code=" subroutine t\n return\n end\n" -- --# Code to be used in simple link tests --lt_simple_link_test_code=" program t\n end\n" - --# ltmain only uses $CC for tagged configurations so make sure $CC is set. --_LT_AC_SYS_COMPILER -+# _LT_CMD_GLOBAL_SYMBOLS -+# ---------------------- -+m4_defun([_LT_CMD_GLOBAL_SYMBOLS], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+AC_REQUIRE([AC_PROG_CC])dnl -+AC_REQUIRE([LT_PATH_NM])dnl -+AC_REQUIRE([LT_PATH_LD])dnl -+m4_require([_LT_DECL_SED])dnl -+m4_require([_LT_DECL_EGREP])dnl -+m4_require([_LT_TAG_COMPILER])dnl - --# Allow CC to be a program name with arguments. --lt_save_CC="$CC" --CC=${F77-"f77"} --compiler=$CC --_LT_AC_TAGVAR(compiler, $1)=$CC --cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` -+# Check for command to grab the raw symbol name followed by C symbol from nm. -+AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -+[ -+# These are sane defaults that work on at least a few old systems. -+# [They come from Ultrix. What could be older than Ultrix?!! ;)] - --AC_MSG_CHECKING([if libtool supports shared libraries]) --AC_MSG_RESULT([$can_build_shared]) -+# Character class describing NM global symbol codes. -+symcode='[[BCDEGRST]]' - --AC_MSG_CHECKING([whether to build shared libraries]) --test "$can_build_shared" = "no" && enable_shared=no -+# Regexp to match symbols that can be accessed directly from C. -+sympat='$[[_A-Za-z]][[_A-Za-z0-9]]*$' - --# On AIX, shared libraries and static libraries use the same namespace, and --# are all built from PIC. --case "$host_os" in --aix3*) -- test "$enable_shared" = yes && enable_static=no -- if test -n "$RANLIB"; then -- archive_cmds="$archive_cmds~\$RANLIB \$lib" -- postinstall_cmds='$RANLIB $lib' -+# Define system-specific variables. -+case $host_os in -+aix*) -+ symcode='[[BCDT]]' -+ ;; -+cygwin* | mingw* | pw32* | cegcc*) -+ symcode='[[ABCDGISTW]]' -+ ;; -+hpux*) -+ if test "$host_cpu" = ia64; then -+ symcode='[[ABCDEGRST]]' - fi - ;; --aix4* | aix5*) -- test "$enable_shared" = yes && enable_static=no -+irix* | nonstopux*) -+ symcode='[[BCDEGRST]]' -+ ;; -+osf*) -+ symcode='[[BCDEGQRST]]' -+ ;; -+solaris*) -+ symcode='[[BDRT]]' -+ ;; -+sco3.2v5*) -+ symcode='[[DT]]' -+ ;; -+sysv4.2uw2*) -+ symcode='[[DT]]' -+ ;; -+sysv5* | sco5v6* | unixware* | OpenUNIX*) -+ symcode='[[ABDT]]' -+ ;; -+sysv4) -+ symcode='[[DFNSTU]]' - ;; - esac --AC_MSG_RESULT([$enable_shared]) -- --AC_MSG_CHECKING([whether to build static libraries]) --# Make sure either enable_shared or enable_static is yes. --test "$enable_shared" = yes || enable_static=yes --AC_MSG_RESULT([$enable_static]) -- --test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no -- --_LT_AC_TAGVAR(GCC, $1)="$G77" --_LT_AC_TAGVAR(LD, $1)="$LD" -- --AC_LIBTOOL_PROG_COMPILER_PIC($1) --AC_LIBTOOL_PROG_CC_C_O($1) --AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) --AC_LIBTOOL_PROG_LD_SHLIBS($1) --AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) --AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) --AC_LIBTOOL_SYS_LIB_STRIP -- -- --AC_LIBTOOL_CONFIG($1) - --AC_LANG_POP --CC="$lt_save_CC" --])# AC_LIBTOOL_LANG_F77_CONFIG -- -- --# AC_LIBTOOL_LANG_GCJ_CONFIG --# -------------------------- --# Ensure that the configuration vars for the C compiler are --# suitably defined. Those variables are subsequently used by --# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. --AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) --AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], --[AC_LANG_SAVE -- --# Source file extension for Java test sources. --ac_ext=java -- --# Object file extension for compiled Java test sources. --objext=o --_LT_AC_TAGVAR(objext, $1)=$objext -- --# Code to be used in simple compile tests --lt_simple_compile_test_code="class foo {}\n" -+# If we're using GNU nm, then use its standard symbol codes. -+case `$NM -V 2>&1` in -+*GNU* | *'with BFD'*) -+ symcode='[[ABCDGIRSTW]]' ;; -+esac - --# Code to be used in simple link tests --lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' -+# Transform an extracted symbol line into a proper C declaration. -+# Some systems (esp. on ia64) link data and code symbols differently, -+# so use this general approach. -+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" - --# ltmain only uses $CC for tagged configurations so make sure $CC is set. --_LT_AC_SYS_COMPILER -+# Transform an extracted symbol line into symbol name and symbol address -+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p'" -+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $lib[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"lib\2\", (void *) \&\2},/p'" - --# Allow CC to be a program name with arguments. --lt_save_CC="$CC" --CC=${GCJ-"gcj"} --compiler=$CC --_LT_AC_TAGVAR(compiler, $1)=$CC -+# Handle CRLF in mingw tool chain -+opt_cr= -+case $build_os in -+mingw*) -+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp -+ ;; -+esac - --# GCJ did not exist at the time GCC didn't implicitly link libc in. --_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -+# Try without a prefix underscore, then with it. -+for ac_symprfx in "" "_"; do - --AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) --AC_LIBTOOL_PROG_COMPILER_PIC($1) --AC_LIBTOOL_PROG_CC_C_O($1) --AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) --AC_LIBTOOL_PROG_LD_SHLIBS($1) --AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) --AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) --AC_LIBTOOL_SYS_LIB_STRIP --AC_LIBTOOL_DLOPEN_SELF($1) -+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. -+ symxfrm="\\1 $ac_symprfx\\2 \\2" - --AC_LIBTOOL_CONFIG($1) -+ # Write the raw and C identifiers. -+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then -+ # Fake it for dumpbin and say T for any non-static function -+ # and D for any global variable. -+ # Also find C++ and __fastcall symbols from MSVC++, -+ # which start with @ or ?. -+ lt_cv_sys_global_symbol_pipe="$AWK ['"\ -+" {last_section=section; section=\$ 3};"\ -+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -+" \$ 0!~/External *\|/{next};"\ -+" / 0+ UNDEF /{next}; / UNDEF $[^|]$*()/{next};"\ -+" {if(hide[section]) next};"\ -+" {f=0}; \$ 0~/.*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -+" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -+" ' prfx=^$ac_symprfx]" -+ else -+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]$$symcode$symcode*$[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" -+ fi - --AC_LANG_RESTORE --CC="$lt_save_CC" --])# AC_LIBTOOL_LANG_GCJ_CONFIG -+ # Check to see that the pipe works correctly. -+ pipe_works=no - -+ rm -f conftest* -+ cat > conftest.$ac_ext <<_LT_EOF -+#ifdef __cplusplus -+extern "C" { -+#endif -+char nm_test_var; -+void nm_test_func(void); -+void nm_test_func(void){} -+#ifdef __cplusplus -+} -+#endif -+int main(){nm_test_var='a';nm_test_func();return(0);} -+_LT_EOF - --# AC_LIBTOOL_LANG_RC_CONFIG --# -------------------------- --# Ensure that the configuration vars for the Windows resource compiler are --# suitably defined. Those variables are subsequently used by --# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. --AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) --AC_DEFUN([_LT_AC_LANG_RC_CONFIG], --[AC_LANG_SAVE -+ if AC_TRY_EVAL(ac_compile); then -+ # Now try to grab the symbols. -+ nlist=conftest.nm -+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then -+ # Try sorting and uniquifying the output. -+ if sort "$nlist" | uniq > "$nlist"T; then -+ mv -f "$nlist"T "$nlist" -+ else -+ rm -f "$nlist"T -+ fi - --# Source file extension for RC test sources. --ac_ext=rc -+ # Make sure that we snagged all the symbols we need. -+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then -+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then -+ cat <<_LT_EOF > conftest.$ac_ext -+#ifdef __cplusplus -+extern "C" { -+#endif - --# Object file extension for compiled RC test sources. --objext=o --_LT_AC_TAGVAR(objext, $1)=$objext -+_LT_EOF -+ # Now generate the symbol file. -+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - --# Code to be used in simple compile tests --lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' -+ cat <<_LT_EOF >> conftest.$ac_ext - --# Code to be used in simple link tests --lt_simple_link_test_code="$lt_simple_compile_test_code" -+/* The mapping between symbol names and symbols. */ -+const struct { -+ const char *name; -+ void *address; -+} -+lt__PROGRAM__LTX_preloaded_symbols[[]] = -+{ -+ { "@PROGRAM@", (void *) 0 }, -+_LT_EOF -+ $SED "s/^$symcode$symcode* $.*$ $.*$$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext -+ cat <<\_LT_EOF >> conftest.$ac_ext -+ {0, (void *) 0} -+}; - --# ltmain only uses $CC for tagged configurations so make sure $CC is set. --_LT_AC_SYS_COMPILER -+/* This works around a problem in FreeBSD linker */ -+#ifdef FREEBSD_WORKAROUND -+static const void *lt_preloaded_setup() { -+ return lt__PROGRAM__LTX_preloaded_symbols; -+} -+#endif - --# Allow CC to be a program name with arguments. -+#ifdef __cplusplus -+} -+#endif -+_LT_EOF -+ # Now try linking the two files. -+ mv conftest.$ac_objext conftstm.$ac_objext -+ lt_save_LIBS="$LIBS" -+ lt_save_CFLAGS="$CFLAGS" -+ LIBS="conftstm.$ac_objext" -+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" -+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then -+ pipe_works=yes -+ fi -+ LIBS="$lt_save_LIBS" -+ CFLAGS="$lt_save_CFLAGS" -+ else -+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD -+ fi -+ else -+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD -+ fi -+ else -+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD -+ fi -+ else -+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD -+ cat conftest.$ac_ext >&5 -+ fi -+ rm -rf conftest* conftst* -+ -+ # Do not use the global_symbol_pipe unless it works. -+ if test "$pipe_works" = yes; then -+ break -+ else -+ lt_cv_sys_global_symbol_pipe= -+ fi -+done -+]) -+if test -z "$lt_cv_sys_global_symbol_pipe"; then -+ lt_cv_sys_global_symbol_to_cdecl= -+fi -+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then -+ AC_MSG_RESULT(failed) -+else -+ AC_MSG_RESULT(ok) -+fi -+ -+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], -+ [Take the output of nm and produce a listing of raw symbols and C names]) -+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], -+ [Transform the output of nm in a proper C declaration]) -+_LT_DECL([global_symbol_to_c_name_address], -+ [lt_cv_sys_global_symbol_to_c_name_address], [1], -+ [Transform the output of nm in a C name address pair]) -+_LT_DECL([global_symbol_to_c_name_address_lib_prefix], -+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], -+ [Transform the output of nm in a C name address pair when lib prefix is needed]) -+]) # _LT_CMD_GLOBAL_SYMBOLS -+ -+ -+# _LT_COMPILER_PIC([TAGNAME]) -+# --------------------------- -+m4_defun([_LT_COMPILER_PIC], -+[m4_require([_LT_TAG_COMPILER])dnl -+_LT_TAGVAR(lt_prog_compiler_wl, $1)= -+_LT_TAGVAR(lt_prog_compiler_pic, $1)= -+_LT_TAGVAR(lt_prog_compiler_static, $1)= -+ -+AC_MSG_CHECKING([for $compiler option to produce PIC]) -+m4_if([$1], [CXX], [ -+ # C++ specific cases for pic, static, wl, etc. -+ if test "$GXX" = yes; then -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ -+ case $host_os in -+ aix*) -+ # All AIX code is PIC. -+ if test "$host_cpu" = ia64; then -+ # AIX 5 now supports IA64 processor -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ fi -+ ;; -+ -+ amigaos*) -+ case $host_cpu in -+ powerpc) -+ # see comment about AmigaOS4 .so support -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ ;; -+ m68k) -+ # FIXME: we need at least 68020 code to build shared libraries, but -+ # adding the `-m68020' flag to GCC prevents building anything better, -+ # like `-m68040'. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' -+ ;; -+ esac -+ ;; -+ -+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) -+ # PIC is the default for these OSes. -+ ;; -+ mingw* | cygwin* | os2* | pw32* | cegcc*) -+ # This hack is so that the source file can tell whether it is being -+ # built for inclusion in a dll (and should export symbols for example). -+ # Although the cygwin gcc ignores -fPIC, still need this for old-style -+ # (--disable-auto-import) libraries -+ m4_if([$1], [GCJ], [], -+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) -+ ;; -+ darwin* | rhapsody*) -+ # PIC is the default on this platform -+ # Common symbols not allowed in MH_DYLIB files -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' -+ ;; -+ *djgpp*) -+ # DJGPP does not support shared libraries at all -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)= -+ ;; -+ interix[[3-9]]*) -+ # Interix 3.x gcc -fpic/-fPIC options generate broken code. -+ # Instead, we relocate shared libraries at runtime. -+ ;; -+ sysv4*MP*) -+ if test -d /usr/nec; then -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic -+ fi -+ ;; -+ hpux*) -+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit -+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag -+ # sets the default TLS model and affects inlining. -+ case $host_cpu in -+ hppa*64*) -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ ;; -+ esac -+ ;; -+ *qnx* | *nto*) -+ # QNX uses GNU C++, but need to define -shared option too, otherwise -+ # it will coredump. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ ;; -+ esac -+ else -+ case $host_os in -+ aix[[4-9]]*) -+ # All AIX code is PIC. -+ if test "$host_cpu" = ia64; then -+ # AIX 5 now supports IA64 processor -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ else -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' -+ fi -+ ;; -+ chorus*) -+ case $cc_basename in -+ cxch68*) -+ # Green Hills C++ Compiler -+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" -+ ;; -+ esac -+ ;; -+ dgux*) -+ case $cc_basename in -+ ec++*) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ ;; -+ ghcx*) -+ # Green Hills C++ Compiler -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ freebsd* | dragonfly*) -+ # FreeBSD uses GNU C++ -+ ;; -+ hpux9* | hpux10* | hpux11*) -+ case $cc_basename in -+ CC*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' -+ if test "$host_cpu" != ia64; then -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' -+ fi -+ ;; -+ aCC*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' -+ case $host_cpu in -+ hppa*64*|ia64*) -+ # +Z the default -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' -+ ;; -+ esac -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ interix*) -+ # This is c89, which is MS Visual C++ (no shared libs) -+ # Anyone wants to do a port? -+ ;; -+ irix5* | irix6* | nonstopux*) -+ case $cc_basename in -+ CC*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ # CC pic flag -KPIC is the default. -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ case $cc_basename in -+ KCC*) -+ # KAI C++ Compiler -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ ;; -+ ecpc* ) -+ # old Intel C++ for x86_64 which still supported -KPIC. -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ ;; -+ icpc* ) -+ # Intel C++, used to be incompatible with GCC. -+ # ICC 10 doesn't accept -KPIC any more. -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ ;; -+ pgCC* | pgcpp*) -+ # Portland Group C++ compiler -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ cxx*) -+ # Compaq C++ -+ # Make sure the PIC flag is empty. It appears that all Alpha -+ # Linux and Compaq Tru64 Unix objects are PIC. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)= -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ xlc* | xlC*) -+ # IBM XL 8.0 on PPC -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' -+ ;; -+ *) -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C++ 5.9 -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' -+ ;; -+ esac -+ ;; -+ esac -+ ;; -+ lynxos*) -+ ;; -+ m88k*) -+ ;; -+ mvs*) -+ case $cc_basename in -+ cxx*) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ netbsd* | netbsdelf*-gnu) -+ ;; -+ *qnx* | *nto*) -+ # QNX uses GNU C++, but need to define -shared option too, otherwise -+ # it will coredump. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' -+ ;; -+ osf3* | osf4* | osf5*) -+ case $cc_basename in -+ KCC*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' -+ ;; -+ RCC*) -+ # Rational C++ 2.4.1 -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -+ ;; -+ cxx*) -+ # Digital/Compaq C++ -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ # Make sure the PIC flag is empty. It appears that all Alpha -+ # Linux and Compaq Tru64 Unix objects are PIC. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)= -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ psos*) -+ ;; -+ solaris*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.2, 5.x and Centerline C++ -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' -+ ;; -+ gcx*) -+ # Green Hills C++ Compiler -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ sunos4*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.x -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ lcc*) -+ # Lucid -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) -+ case $cc_basename in -+ CC*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ esac -+ ;; -+ tandem*) -+ case $cc_basename in -+ NCC*) -+ # NonStop-UX NCC 3.20 -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ vxworks*) -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no -+ ;; -+ esac -+ fi -+], -+[ -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ -+ case $host_os in -+ aix*) -+ # All AIX code is PIC. -+ if test "$host_cpu" = ia64; then -+ # AIX 5 now supports IA64 processor -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ fi -+ ;; -+ -+ amigaos*) -+ case $host_cpu in -+ powerpc) -+ # see comment about AmigaOS4 .so support -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ ;; -+ m68k) -+ # FIXME: we need at least 68020 code to build shared libraries, but -+ # adding the `-m68020' flag to GCC prevents building anything better, -+ # like `-m68040'. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' -+ ;; -+ esac -+ ;; -+ -+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) -+ # PIC is the default for these OSes. -+ ;; -+ -+ mingw* | cygwin* | pw32* | os2* | cegcc*) -+ # This hack is so that the source file can tell whether it is being -+ # built for inclusion in a dll (and should export symbols for example). -+ # Although the cygwin gcc ignores -fPIC, still need this for old-style -+ # (--disable-auto-import) libraries -+ m4_if([$1], [GCJ], [], -+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) -+ ;; -+ -+ darwin* | rhapsody*) -+ # PIC is the default on this platform -+ # Common symbols not allowed in MH_DYLIB files -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' -+ ;; -+ -+ hpux*) -+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit -+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag -+ # sets the default TLS model and affects inlining. -+ case $host_cpu in -+ hppa*64*) -+ # +Z the default -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ ;; -+ esac -+ ;; -+ -+ interix[[3-9]]*) -+ # Interix 3.x gcc -fpic/-fPIC options generate broken code. -+ # Instead, we relocate shared libraries at runtime. -+ ;; -+ -+ msdosdjgpp*) -+ # Just because we use GCC doesn't mean we suddenly get shared libraries -+ # on systems that don't support them. -+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no -+ enable_shared=no -+ ;; -+ -+ *nto* | *qnx*) -+ # QNX uses GNU C++, but need to define -shared option too, otherwise -+ # it will coredump. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' -+ ;; -+ -+ sysv4*MP*) -+ if test -d /usr/nec; then -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic -+ fi -+ ;; -+ -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ ;; -+ esac -+ else -+ # PORTME Check for flag to pass linker flags through the system compiler. -+ case $host_os in -+ aix*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ if test "$host_cpu" = ia64; then -+ # AIX 5 now supports IA64 processor -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ else -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' -+ fi -+ ;; -+ -+ mingw* | cygwin* | pw32* | os2* | cegcc*) -+ # This hack is so that the source file can tell whether it is being -+ # built for inclusion in a dll (and should export symbols for example). -+ m4_if([$1], [GCJ], [], -+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) -+ ;; -+ -+ hpux9* | hpux10* | hpux11*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -+ # not for PA HP-UX. -+ case $host_cpu in -+ hppa*64*|ia64*) -+ # +Z the default -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' -+ ;; -+ esac -+ # Is there a better lt_prog_compiler_static that works with the bundled CC? -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' -+ ;; -+ -+ irix5* | irix6* | nonstopux*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ # PIC (with -KPIC) is the default. -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ case $cc_basename in -+ # old Intel for x86_64 which still supported -KPIC. -+ ecc*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ ;; -+ # icc used to be incompatible with GCC. -+ # ICC 10 doesn't accept -KPIC any more. -+ icc* | ifort*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ ;; -+ # Lahey Fortran 8.1. -+ lf95*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' -+ ;; -+ pgcc* | pgf77* | pgf90* | pgf95*) -+ # Portland Group compilers (*not* the Pentium gcc compiler, -+ # which looks to be a dead project) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ ccc*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ # All Alpha code is PIC. -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ xl*) -+ # IBM XL C 8.0/Fortran 10.1 on PPC -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' -+ ;; -+ *) -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C 5.9 -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ ;; -+ *Sun\ F*) -+ # Sun Fortran 8.3 passes all unrecognized flags to the linker -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='' -+ ;; -+ esac -+ ;; -+ esac -+ ;; -+ -+ newsos6) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ -+ *nto* | *qnx*) -+ # QNX uses GNU C++, but need to define -shared option too, otherwise -+ # it will coredump. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' -+ ;; -+ -+ osf3* | osf4* | osf5*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ # All OSF/1 code is PIC. -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ -+ rdos*) -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ -+ solaris*) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ case $cc_basename in -+ f77* | f90* | f95*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; -+ esac -+ ;; -+ -+ sunos4*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ -+ sysv4 | sysv4.2uw2* | sysv4.3*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ -+ sysv4*MP*) -+ if test -d /usr/nec ;then -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ fi -+ ;; -+ -+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ -+ unicos*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no -+ ;; -+ -+ uts4*) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ -+ *) -+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no -+ ;; -+ esac -+ fi -+]) -+case $host_os in -+ # For platforms which do not support PIC, -DPIC is meaningless: -+ *djgpp*) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)= -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" -+ ;; -+esac -+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], -+ [How to pass a linker flag through the compiler]) -+ -+# -+# Check to make sure the PIC flag actually works. -+# -+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then -+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], -+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], -+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], -+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in -+ "" | " "*) ;; -+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; -+ esac], -+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)= -+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -+fi -+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], -+ [Additional compiler flags for building library objects]) -+ -+# -+# Check to make sure the static flag actually works. -+# -+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" -+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], -+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), -+ $lt_tmp_static_flag, -+ [], -+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) -+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], -+ [Compiler flag to prevent dynamic linking]) -+])# _LT_COMPILER_PIC -+ -+ -+# _LT_LINKER_SHLIBS([TAGNAME]) -+# ---------------------------- -+# See if the linker supports building shared libraries. -+m4_defun([_LT_LINKER_SHLIBS], -+[AC_REQUIRE([LT_PATH_LD])dnl -+AC_REQUIRE([LT_PATH_NM])dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_DECL_EGREP])dnl -+m4_require([_LT_DECL_SED])dnl -+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -+m4_require([_LT_TAG_COMPILER])dnl -+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -+m4_if([$1], [CXX], [ -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -+ case $host_os in -+ aix[[4-9]]*) -+ # If we're using GNU nm, then we don't want the "-C" option. -+ # -C means demangle to AIX nm, but means don't demangle with GNU nm -+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ else -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ fi -+ ;; -+ pw32*) -+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" -+ ;; -+ cygwin* | mingw* | cegcc*) -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__$[[^ ]]*$[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' -+ ;; -+ linux* | k*bsd*-gnu) -+ _LT_TAGVAR(link_all_deplibs, $1)=no -+ ;; -+ *) -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -+ ;; -+ esac -+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] -+], [ -+ runpath_var= -+ _LT_TAGVAR(allow_undefined_flag, $1)= -+ _LT_TAGVAR(always_export_symbols, $1)=no -+ _LT_TAGVAR(archive_cmds, $1)= -+ _LT_TAGVAR(archive_expsym_cmds, $1)= -+ _LT_TAGVAR(compiler_needs_object, $1)=no -+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)= -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -+ _LT_TAGVAR(hardcode_automatic, $1)=no -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -+ _LT_TAGVAR(hardcode_libdir_separator, $1)= -+ _LT_TAGVAR(hardcode_minus_L, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -+ _LT_TAGVAR(inherit_rpath, $1)=no -+ _LT_TAGVAR(link_all_deplibs, $1)=unknown -+ _LT_TAGVAR(module_cmds, $1)= -+ _LT_TAGVAR(module_expsym_cmds, $1)= -+ _LT_TAGVAR(old_archive_from_new_cmds, $1)= -+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= -+ _LT_TAGVAR(thread_safe_flag_spec, $1)= -+ _LT_TAGVAR(whole_archive_flag_spec, $1)= -+ # include_expsyms should be a list of space-separated symbols to be *always* -+ # included in the symbol list -+ _LT_TAGVAR(include_expsyms, $1)= -+ # exclude_expsyms can be an extended regexp of symbols to exclude -+ # it will be wrapped by ` (' and `)$', so one must not match beginning or -+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -+ # as well as any symbol that contains `d'. -+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] -+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -+ # platforms (ab)use it in PIC code, but their linkers get confused if -+ # the symbol is explicitly referenced. Since portable code cannot -+ # rely on this symbol name, it's probably fine to never include it in -+ # preloaded symbol tables. -+ # Exclude shared library initialization/finalization symbols. -+dnl Note also adjust exclude_expsyms for C++ above. -+ extract_expsyms_cmds= -+ -+ case $host_os in -+ cygwin* | mingw* | pw32* | cegcc*) -+ # FIXME: the MSVC++ port hasn't been tested in a loooong time -+ # When not using gcc, we currently assume that we are using -+ # Microsoft Visual C++. -+ if test "$GCC" != yes; then -+ with_gnu_ld=no -+ fi -+ ;; -+ interix*) -+ # we just hope/assume this is gcc and not c89 (= MSVC++) -+ with_gnu_ld=yes -+ ;; -+ openbsd*) -+ with_gnu_ld=no -+ ;; -+ linux* | k*bsd*-gnu) -+ _LT_TAGVAR(link_all_deplibs, $1)=no -+ ;; -+ esac -+ -+ _LT_TAGVAR(ld_shlibs, $1)=yes -+ if test "$with_gnu_ld" = yes; then -+ # If archive_cmds runs LD, not CC, wlarc should be empty -+ wlarc='${wl}' -+ -+ # Set some defaults for GNU ld with shared library support. These -+ # are reset later if shared libraries are not supported. Putting them -+ # here allows them to be overridden if necessary. -+ runpath_var=LD_RUN_PATH -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+ # ancient GNU ld didn't support --whole-archive et. al. -+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then -+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -+ else -+ _LT_TAGVAR(whole_archive_flag_spec, $1)= -+ fi -+ supports_anon_versioning=no -+ case `$LD -v 2>&1` in -+ *GNU\ gold*) supports_anon_versioning=yes ;; -+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 -+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... -+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... -+ *\ 2.11.*) ;; # other 2.11 versions -+ *) supports_anon_versioning=yes ;; -+ esac -+ -+ # See if GNU ld supports shared libraries. -+ case $host_os in -+ aix[[3-9]]*) -+ # On AIX/PPC, the GNU linker is very broken -+ if test "$host_cpu" != ia64; then -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ cat <<_LT_EOF 1>&2 -+ -+*** Warning: the GNU linker, at least up to release 2.9.1, is reported -+*** to be unable to reliably create shared libraries on AIX. -+*** Therefore, libtool is disabling shared libraries support. If you -+*** really care for shared libraries, you may want to modify your PATH -+*** so that a non-GNU linker is found, and then restart. -+ -+_LT_EOF -+ fi -+ ;; -+ -+ amigaos*) -+ case $host_cpu in -+ powerpc) -+ # see comment about AmigaOS4 .so support -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='' -+ ;; -+ m68k) -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ ;; -+ esac -+ ;; -+ -+ beos*) -+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ # Joseph Beckenbach says some releases of gcc -+ # support --undefined. This deserves some investigation. FIXME -+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ -+ cygwin* | mingw* | pw32* | cegcc*) -+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, -+ # as there is no search path for DLLs. -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ _LT_TAGVAR(always_export_symbols, $1)=no -+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' -+ -+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ # If the export-symbols file already is a .def file (1st line -+ # is EXPORTS), use it as is; otherwise, prepend... -+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ cp $export_symbols $output_objdir/$soname.def; -+ else -+ echo EXPORTS > $output_objdir/$soname.def; -+ cat $export_symbols >> $output_objdir/$soname.def; -+ fi~ -+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ -+ interix[[3-9]]*) -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. -+ # Instead, shared libraries are loaded at an image base (0x10000000 by -+ # default) and relocated if they conflict, which is a slow very memory -+ # consuming and fragmenting process. To avoid this, we pick a random, -+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link -+ # time. Moving up from 0x10000000 also allows more sbrk(2) space. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' -+ ;; -+ -+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) -+ tmp_diet=no -+ if test "$host_os" = linux-dietlibc; then -+ case $cc_basename in -+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) -+ esac -+ fi -+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ -+ && test "$tmp_diet" = no -+ then -+ tmp_addflag= -+ tmp_sharedflag='-shared' -+ case $cc_basename,$host_cpu in -+ pgcc*) # Portland Group C compiler -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ tmp_addflag=' $pic_flag' -+ ;; -+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ tmp_addflag=' $pic_flag -Mnomain' ;; -+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 -+ tmp_addflag=' -i_dynamic' ;; -+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 -+ tmp_addflag=' -i_dynamic -nofor_main' ;; -+ ifc* | ifort*) # Intel Fortran compiler -+ tmp_addflag=' -nofor_main' ;; -+ lf95*) # Lahey Fortran 8.1 -+ _LT_TAGVAR(whole_archive_flag_spec, $1)= -+ tmp_sharedflag='--shared' ;; -+ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) -+ tmp_sharedflag='-qmkshrobj' -+ tmp_addflag= ;; -+ esac -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) # Sun C 5.9 -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ _LT_TAGVAR(compiler_needs_object, $1)=yes -+ tmp_sharedflag='-G' ;; -+ *Sun\ F*) # Sun Fortran 8.3 -+ tmp_sharedflag='-G' ;; -+ esac -+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ -+ if test "x$supports_anon_versioning" = xyes; then -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ -+ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ -+ echo "local: *; };" >> $output_objdir/$libname.ver~ -+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' -+ fi -+ -+ case $cc_basename in -+ xlf*) -+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' -+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' -+ if test "x$supports_anon_versioning" = xyes; then -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ -+ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ -+ echo "local: *; };" >> $output_objdir/$libname.ver~ -+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' -+ fi -+ ;; -+ esac -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ -+ netbsd* | netbsdelf*-gnu) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' -+ wlarc= -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ fi -+ ;; -+ -+ solaris*) -+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ cat <<_LT_EOF 1>&2 -+ -+*** Warning: The releases 2.8.* of the GNU linker cannot reliably -+*** create shared libraries on Solaris systems. Therefore, libtool -+*** is disabling shared libraries support. We urge you to upgrade GNU -+*** binutils to release 2.9.1 or newer. Another option is to modify -+*** your PATH or compiler configuration so that the native linker is -+*** used, and then restart. -+ -+_LT_EOF -+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ -+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) -+ case `$LD -v 2>&1` in -+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ cat <<_LT_EOF 1>&2 -+ -+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -+*** reliably create shared libraries on SCO systems. Therefore, libtool -+*** is disabling shared libraries support. We urge you to upgrade GNU -+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -+*** your PATH or compiler configuration so that the native linker is -+*** used, and then restart. -+ -+_LT_EOF -+ ;; -+ *) -+ # For security reasons, it is highly recommended that you always -+ # use absolute paths for naming shared libraries, and exclude the -+ # DT_RUNPATH tag from executables and libraries. But doing so -+ # requires that you compile everything twice, which is a pain. -+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ esac -+ ;; -+ -+ sunos4*) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' -+ wlarc= -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ *) -+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ esac -+ -+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then -+ runpath_var= -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)= -+ _LT_TAGVAR(whole_archive_flag_spec, $1)= -+ fi -+ else -+ # PORTME fill in a description of your system's linker (not GNU ld) -+ case $host_os in -+ aix3*) -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ _LT_TAGVAR(always_export_symbols, $1)=yes -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' -+ # Note: this linker hardcodes the directories in LIBPATH if there -+ # are no directories specified by -L. -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then -+ # Neither direct hardcoding nor static linking is supported with a -+ # broken collect2. -+ _LT_TAGVAR(hardcode_direct, $1)=unsupported -+ fi -+ ;; -+ -+ aix[[4-9]]*) -+ if test "$host_cpu" = ia64; then -+ # On IA64, the linker does run time linking by default, so we don't -+ # have to do anything special. -+ aix_use_runtimelinking=no -+ exp_sym_flag='-Bexport' -+ no_entry_flag="" -+ else -+ # If we're using GNU nm, then we don't want the "-C" option. -+ # -C means demangle to AIX nm, but means don't demangle with GNU nm -+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ else -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ fi -+ aix_use_runtimelinking=no -+ -+ # Test if we are trying to use run time linking or normal -+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we -+ # need to do runtime linking. -+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) -+ for ld_flag in $LDFLAGS; do -+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then -+ aix_use_runtimelinking=yes -+ break -+ fi -+ done -+ ;; -+ esac -+ -+ exp_sym_flag='-bexport' -+ no_entry_flag='-bnoentry' -+ fi -+ -+ # When large executables or shared objects are built, AIX ld can -+ # have problems creating the table of contents. If linking a library -+ # or program results in "error TOC overflow" add -mminimal-toc to -+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not -+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -+ -+ _LT_TAGVAR(archive_cmds, $1)='' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' -+ -+ if test "$GCC" = yes; then -+ case $host_os in aix4.[[012]]|aix4.[[012]].*) -+ # We only want to do this on AIX 4.2 and lower, the check -+ # below for broken collect2 doesn't work under 4.3+ -+ collect2name=`${CC} -print-prog-name=collect2` -+ if test -f "$collect2name" && -+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null -+ then -+ # We have reworked collect2 -+ : -+ else -+ # We have old collect2 -+ _LT_TAGVAR(hardcode_direct, $1)=unsupported -+ # It fails to find uninstalled libraries when the uninstalled -+ # path is not listed in the libpath. Setting hardcode_minus_L -+ # to unsupported forces relinking -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)= -+ fi -+ ;; -+ esac -+ shared_flag='-shared' -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag="$shared_flag "'${wl}-G' -+ fi -+ _LT_TAGVAR(link_all_deplibs, $1)=no -+ else -+ # not using gcc -+ if test "$host_cpu" = ia64; then -+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release -+ # chokes on -Wl,-G. The following line is correct: -+ shared_flag='-G' -+ else -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag='${wl}-G' -+ else -+ shared_flag='${wl}-bM:SRE' -+ fi -+ fi -+ fi -+ -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' -+ # It seems that -bexpall does not export symbols beginning with -+ # underscore (_), so it is better to generate a list of symbols to export. -+ _LT_TAGVAR(always_export_symbols, $1)=yes -+ if test "$aix_use_runtimelinking" = yes; then -+ # Warning - without using the other runtime loading flags (-brtl), -+ # -berok will link without error, but may produce a broken library. -+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' -+ # Determine the default libpath from the value encoded in an -+ # empty executable. -+ _LT_SYS_MODULE_PATH_AIX -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" -+ else -+ if test "$host_cpu" = ia64; then -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' -+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" -+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" -+ else -+ # Determine the default libpath from the value encoded in an -+ # empty executable. -+ _LT_SYS_MODULE_PATH_AIX -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -+ # Warning - without using the other run time loading flags, -+ # -berok will link without error, but may produce a broken library. -+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' -+ # Exported symbols can be pulled into shared objects from archives -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes -+ # This is similar to how AIX traditionally builds its shared libraries. -+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -+ fi -+ fi -+ ;; -+ -+ amigaos*) -+ case $host_cpu in -+ powerpc) -+ # see comment about AmigaOS4 .so support -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='' -+ ;; -+ m68k) -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ ;; -+ esac -+ ;; -+ -+ bsdi[[45]]*) -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic -+ ;; -+ -+ cygwin* | mingw* | pw32* | cegcc*) -+ # When not using gcc, we currently assume that we are using -+ # Microsoft Visual C++. -+ # hardcode_libdir_flag_spec is actually meaningless, as there is -+ # no search path for DLLs. -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ # Tell ltmain to make .lib files, not .a files. -+ libext=lib -+ # Tell ltmain to make .dll files, not .so files. -+ shrext_cmds=".dll" -+ # FIXME: Setting linknames here is a bad hack. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' -+ # The linker will automatically build a .lib file if we build a DLL. -+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' -+ # FIXME: Should let the user specify the lib program. -+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' -+ _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' -+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -+ ;; -+ -+ darwin* | rhapsody*) -+ _LT_DARWIN_LINKER_FEATURES($1) -+ ;; -+ -+ dgux*) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ freebsd1*) -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ -+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor -+ # support. Future versions do this automatically, but an explicit c++rt0.o -+ # does not break anything, and helps significantly (at the cost of a little -+ # extra space). -+ freebsd2.2*) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ # Unfortunately, older versions of FreeBSD 2 do not have this feature. -+ freebsd2*) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. -+ freebsd* | dragonfly*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ hpux9*) -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ fi -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ -+ # hardcode_minus_L: Not really in the search PATH, -+ # but as the default location of the library. -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ ;; -+ -+ hpux10*) -+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -+ fi -+ if test "$with_gnu_ld" = no; then -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ # hardcode_minus_L: Not really in the search PATH, -+ # but as the default location of the library. -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ fi -+ ;; -+ -+ hpux11*) -+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then -+ case $host_cpu in -+ hppa*64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ ia64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ esac -+ else -+ case $host_cpu in -+ hppa*64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ ia64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ esac -+ fi -+ if test "$with_gnu_ld" = no; then -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ -+ case $host_cpu in -+ hppa*64*|ia64*) -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ *) -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ -+ # hardcode_minus_L: Not really in the search PATH, -+ # but as the default location of the library. -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ ;; -+ esac -+ fi -+ ;; -+ -+ irix5* | irix6* | nonstopux*) -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ # Try to use the -exported_symbol ld option, if it does not -+ # work, assume that -exports_file does not work either and -+ # implicitly export all symbols. -+ save_LDFLAGS="$LDFLAGS" -+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" -+ AC_LINK_IFELSE(int foo(void) {}, -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' -+ ) -+ LDFLAGS="$save_LDFLAGS" -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' -+ fi -+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ _LT_TAGVAR(inherit_rpath, $1)=yes -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ ;; -+ -+ netbsd* | netbsdelf*-gnu) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF -+ fi -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ newsos6) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ *nto* | *qnx*) -+ ;; -+ -+ openbsd*) -+ if test -f /usr/libexec/ld.so; then -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ else -+ case $host_os in -+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ ;; -+ esac -+ fi -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ -+ os2*) -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' -+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' -+ ;; -+ -+ osf3*) -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ else -+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ fi -+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ ;; -+ -+ osf4* | osf5*) # as osf3* with the addition of -msym flag -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ else -+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ -+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' -+ -+ # Both c and cxx compiler support -rpath directly -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' -+ fi -+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ ;; -+ -+ solaris*) -+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' -+ if test "$GCC" = yes; then -+ wlarc='${wl}' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' -+ else -+ case `$CC -V 2>&1` in -+ *"Compilers 5.0"*) -+ wlarc='' -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' -+ ;; -+ *) -+ wlarc='${wl}' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' -+ ;; -+ esac -+ fi -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ case $host_os in -+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; -+ *) -+ # The compiler driver will combine and reorder linker options, -+ # but understands `-z linker_flag'. GCC discards it without `$wl', -+ # but is careful enough not to reorder. -+ # Supported since Solaris 2.6 (maybe 2.5.1?) -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' -+ else -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' -+ fi -+ ;; -+ esac -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ ;; -+ -+ sunos4*) -+ if test "x$host_vendor" = xsequent; then -+ # Use $CC to link under sequent, because it throws in some extra .o -+ # files that make .init and .fini sections work. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' -+ fi -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ sysv4) -+ case $host_vendor in -+ sni) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? -+ ;; -+ siemens) -+ ## LD is ld it makes a PLAMLIB -+ ## CC just makes a GrossModule. -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ ;; -+ motorola) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie -+ ;; -+ esac -+ runpath_var='LD_RUN_PATH' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ sysv4.3*) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' -+ ;; -+ -+ sysv4*MP*) -+ if test -d /usr/nec; then -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ runpath_var=LD_RUN_PATH -+ hardcode_runpath_var=yes -+ _LT_TAGVAR(ld_shlibs, $1)=yes -+ fi -+ ;; -+ -+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) -+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ runpath_var='LD_RUN_PATH' -+ -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ fi -+ ;; -+ -+ sysv5* | sco3.2v5* | sco5v6*) -+ # Note: We can NOT use -z defs as we might desire, because we do not -+ # link with -lc, and that would cause any symbols used from libc to -+ # always be unresolved, which means just about no library would -+ # ever link correctly. If we're not using GNU ld we use -z text -+ # though, which does catch some bad symbols but isn't as heavy-handed -+ # as -z defs. -+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' -+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' -+ runpath_var='LD_RUN_PATH' -+ -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ fi -+ ;; -+ -+ uts4*) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ *) -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac -+ -+ if test x$host_vendor = xsni; then -+ case $host in -+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' -+ ;; -+ esac -+ fi -+ fi -+]) -+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no -+ -+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld -+ -+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl -+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl -+_LT_DECL([], [extract_expsyms_cmds], [2], -+ [The commands to extract the exported symbol list from a shared archive]) -+ -+# -+# Do we need to explicitly link libc? -+# -+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in -+x|xyes) -+ # Assume -lc should be added -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes -+ -+ if test "$enable_shared" = yes && test "$GCC" = yes; then -+ case $_LT_TAGVAR(archive_cmds, $1) in -+ *'~'*) -+ # FIXME: we may have to deal with multi-command sequences. -+ ;; -+ '$CC '*) -+ # Test whether the compiler implicitly links with -lc since on some -+ # systems, -lgcc has to come before -lc. If gcc already passes -lc -+ # to ld, don't add -lc before -lgcc. -+ AC_MSG_CHECKING([whether -lc should be explicitly linked in]) -+ $RM conftest* -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+ -+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then -+ soname=conftest -+ lib=conftest -+ libobjs=conftest.$ac_objext -+ deplibs= -+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) -+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) -+ compiler_flags=-v -+ linker_flags=-v -+ verstring= -+ output_objdir=. -+ libname=conftest -+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) -+ _LT_TAGVAR(allow_undefined_flag, $1)= -+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) -+ then -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ else -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes -+ fi -+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag -+ else -+ cat conftest.err 1>&5 -+ fi -+ $RM conftest* -+ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) -+ ;; -+ esac -+ fi -+ ;; -+esac -+ -+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], -+ [Whether or not to add -lc for building shared libraries]) -+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], -+ [enable_shared_with_static_runtimes], [0], -+ [Whether or not to disallow shared libs when runtime libs are static]) -+_LT_TAGDECL([], [export_dynamic_flag_spec], [1], -+ [Compiler flag to allow reflexive dlopens]) -+_LT_TAGDECL([], [whole_archive_flag_spec], [1], -+ [Compiler flag to generate shared objects directly from archives]) -+_LT_TAGDECL([], [compiler_needs_object], [1], -+ [Whether the compiler copes with passing no objects directly]) -+_LT_TAGDECL([], [old_archive_from_new_cmds], [2], -+ [Create an old-style archive from a shared archive]) -+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], -+ [Create a temporary old-style archive to link instead of a shared archive]) -+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) -+_LT_TAGDECL([], [archive_expsym_cmds], [2]) -+_LT_TAGDECL([], [module_cmds], [2], -+ [Commands used to build a loadable module if different from building -+ a shared archive.]) -+_LT_TAGDECL([], [module_expsym_cmds], [2]) -+_LT_TAGDECL([], [with_gnu_ld], [1], -+ [Whether we are building with GNU ld or not]) -+_LT_TAGDECL([], [allow_undefined_flag], [1], -+ [Flag that allows shared libraries with undefined symbols to be built]) -+_LT_TAGDECL([], [no_undefined_flag], [1], -+ [Flag that enforces no undefined symbols]) -+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], -+ [Flag to hardcode $libdir into a binary during linking. -+ This must work even if $libdir does not exist]) -+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], -+ [[If ld is used when linking, flag to hardcode $libdir into a binary -+ during linking. This must work even if $libdir does not exist]]) -+_LT_TAGDECL([], [hardcode_libdir_separator], [1], -+ [Whether we need a single "-rpath" flag with a separated argument]) -+_LT_TAGDECL([], [hardcode_direct], [0], -+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes -+ DIR into the resulting binary]) -+_LT_TAGDECL([], [hardcode_direct_absolute], [0], -+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes -+ DIR into the resulting binary and the resulting library dependency is -+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the -+ library is relocated]) -+_LT_TAGDECL([], [hardcode_minus_L], [0], -+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR -+ into the resulting binary]) -+_LT_TAGDECL([], [hardcode_shlibpath_var], [0], -+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -+ into the resulting binary]) -+_LT_TAGDECL([], [hardcode_automatic], [0], -+ [Set to "yes" if building a shared library automatically hardcodes DIR -+ into the library and all subsequent libraries and executables linked -+ against it]) -+_LT_TAGDECL([], [inherit_rpath], [0], -+ [Set to yes if linker adds runtime paths of dependent libraries -+ to runtime path list]) -+_LT_TAGDECL([], [link_all_deplibs], [0], -+ [Whether libtool must link a program against all its dependency libraries]) -+_LT_TAGDECL([], [fix_srcfile_path], [1], -+ [Fix the shell variable $srcfile for the compiler]) -+_LT_TAGDECL([], [always_export_symbols], [0], -+ [Set to "yes" if exported symbols are required]) -+_LT_TAGDECL([], [export_symbols_cmds], [2], -+ [The commands to list exported symbols]) -+_LT_TAGDECL([], [exclude_expsyms], [1], -+ [Symbols that should not be listed in the preloaded symbols]) -+_LT_TAGDECL([], [include_expsyms], [1], -+ [Symbols that must always be exported]) -+_LT_TAGDECL([], [prelink_cmds], [2], -+ [Commands necessary for linking programs (against libraries) with templates]) -+_LT_TAGDECL([], [file_list_spec], [1], -+ [Specify filename containing input files]) -+dnl FIXME: Not yet implemented -+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], -+dnl [Compiler flag to generate thread safe objects]) -+])# _LT_LINKER_SHLIBS -+ -+ -+# _LT_LANG_C_CONFIG([TAG]) -+# ------------------------ -+# Ensure that the configuration variables for a C compiler are suitably -+# defined. These variables are subsequently used by _LT_CONFIG to write -+# the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_C_CONFIG], -+[m4_require([_LT_DECL_EGREP])dnl - lt_save_CC="$CC" --CC=${RC-"windres"} --compiler=$CC --_LT_AC_TAGVAR(compiler, $1)=$CC --_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes -+AC_LANG_PUSH(C) -+ -+# Source file extension for C test sources. -+ac_ext=c -+ -+# Object file extension for compiled C test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext - --AC_LIBTOOL_CONFIG($1) -+# Code to be used in simple compile tests -+lt_simple_compile_test_code="int some_variable = 0;" - --AC_LANG_RESTORE --CC="$lt_save_CC" --])# AC_LIBTOOL_LANG_RC_CONFIG -+# Code to be used in simple link tests -+lt_simple_link_test_code='int main(){return(0);}' - -+_LT_TAG_COMPILER -+# Save the default compiler, since it gets overwritten when the other -+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -+compiler_DEFAULT=$CC -+ -+# save warnings/boilerplate of simple test code -+_LT_COMPILER_BOILERPLATE -+_LT_LINKER_BOILERPLATE -+ -+if test -n "$compiler"; then -+ _LT_COMPILER_NO_RTTI($1) -+ _LT_COMPILER_PIC($1) -+ _LT_COMPILER_C_O($1) -+ _LT_COMPILER_FILE_LOCKS($1) -+ _LT_LINKER_SHLIBS($1) -+ _LT_SYS_DYNAMIC_LINKER($1) -+ _LT_LINKER_HARDCODE_LIBPATH($1) -+ LT_SYS_DLOPEN_SELF -+ _LT_CMD_STRIPLIB -+ -+ # Report which library types will actually be built -+ AC_MSG_CHECKING([if libtool supports shared libraries]) -+ AC_MSG_RESULT([$can_build_shared]) - --# AC_LIBTOOL_CONFIG([TAGNAME]) --# ---------------------------- --# If TAGNAME is not passed, then create an initial libtool script --# with a default configuration from the untagged config vars. Otherwise --# add code to config.status for appending the configuration named by --# TAGNAME from the matching tagged config vars. --AC_DEFUN([AC_LIBTOOL_CONFIG], --[# The else clause should only fire when bootstrapping the --# libtool distribution, otherwise you forgot to ship ltmain.sh --# with your package, and you will get complaints that there are --# no rules to generate ltmain.sh. --if test -f "$ltmain"; then -- # See if we are running on zsh, and set the options which allow our commands through -- # without removal of \ escapes. -- if test -n "${ZSH_VERSION+set}" ; then -- setopt NO_GLOB_SUBST -- fi -- # Now quote all the things that may contain metacharacters while being -- # careful not to overquote the AC_SUBSTed values. We take copies of the -- # variables and quote the copies for generation of the libtool script. -- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ -- SED SHELL STRIP \ -- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ -- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ -- deplibs_check_method reload_flag reload_cmds need_locks \ -- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ -- lt_cv_sys_global_symbol_to_c_name_address \ -- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ -- old_postinstall_cmds old_postuninstall_cmds \ -- _LT_AC_TAGVAR(compiler, $1) \ -- _LT_AC_TAGVAR(CC, $1) \ -- _LT_AC_TAGVAR(LD, $1) \ -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ -- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ -- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ -- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ -- _LT_AC_TAGVAR(old_archive_cmds, $1) \ -- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ -- _LT_AC_TAGVAR(predep_objects, $1) \ -- _LT_AC_TAGVAR(postdep_objects, $1) \ -- _LT_AC_TAGVAR(predeps, $1) \ -- _LT_AC_TAGVAR(postdeps, $1) \ -- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ -- _LT_AC_TAGVAR(archive_cmds, $1) \ -- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ -- _LT_AC_TAGVAR(postinstall_cmds, $1) \ -- _LT_AC_TAGVAR(postuninstall_cmds, $1) \ -- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ -- _LT_AC_TAGVAR(allow_undefined_flag, $1) \ -- _LT_AC_TAGVAR(no_undefined_flag, $1) \ -- _LT_AC_TAGVAR(export_symbols_cmds, $1) \ -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ -- _LT_AC_TAGVAR(hardcode_automatic, $1) \ -- _LT_AC_TAGVAR(module_cmds, $1) \ -- _LT_AC_TAGVAR(module_expsym_cmds, $1) \ -- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ -- _LT_AC_TAGVAR(exclude_expsyms, $1) \ -- _LT_AC_TAGVAR(include_expsyms, $1); do -- -- case $var in -- _LT_AC_TAGVAR(old_archive_cmds, $1) | \ -- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ -- _LT_AC_TAGVAR(archive_cmds, $1) | \ -- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ -- _LT_AC_TAGVAR(module_cmds, $1) | \ -- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ -- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ -- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ -- extract_expsyms_cmds | reload_cmds | finish_cmds | \ -- postinstall_cmds | postuninstall_cmds | \ -- old_postinstall_cmds | old_postuninstall_cmds | \ -- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) -- # Double-quote double-evaled strings. -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" -- ;; -- *) -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" -- ;; -- esac -- done -+ AC_MSG_CHECKING([whether to build shared libraries]) -+ test "$can_build_shared" = "no" && enable_shared=no -+ -+ # On AIX, shared libraries and static libraries use the same namespace, and -+ # are all built from PIC. -+ case $host_os in -+ aix3*) -+ test "$enable_shared" = yes && enable_static=no -+ if test -n "$RANLIB"; then -+ archive_cmds="$archive_cmds~\$RANLIB \$lib" -+ postinstall_cmds='$RANLIB $lib' -+ fi -+ ;; - -- case $lt_echo in -- *'\[$]0 --fallback-echo"') -- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` -+ aix[[4-9]]*) -+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then -+ test "$enable_shared" = yes && enable_static=no -+ fi - ;; - esac -+ AC_MSG_RESULT([$enable_shared]) - --ifelse([$1], [], -- [cfgfile="${ofile}T" -- trap "$rm \"$cfgfile\"; exit 1" 1 2 15 -- $rm -f "$cfgfile" -- AC_MSG_NOTICE([creating $ofile])], -- [cfgfile="$ofile"]) -+ AC_MSG_CHECKING([whether to build static libraries]) -+ # Make sure either enable_shared or enable_static is yes. -+ test "$enable_shared" = yes || enable_static=yes -+ AC_MSG_RESULT([$enable_static]) - -- cat <<__EOF__ >> "$cfgfile" --ifelse([$1], [], --[#! $SHELL -+ _LT_CONFIG($1) -+fi -+AC_LANG_POP -+CC="$lt_save_CC" -+])# _LT_LANG_C_CONFIG - --# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. --# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) --# NOTE: Changes made to this file will be lost: look at ltmain.sh. --# --# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 --# Free Software Foundation, Inc. --# --# This file is part of GNU Libtool: --# Originally by Gordon Matzigkeit , 1996 --# --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2 of the License, or --# (at your option) any later version. --# --# This program is distributed in the hope that it will be useful, but --# WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU --# General Public License for more details. --# --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. --# --# As a special exception to the GNU General Public License, if you --# distribute this file as part of a program that contains a --# configuration script generated by Autoconf, you may include it under --# the same distribution terms that you use for the rest of that program. - --# A sed program that does not truncate output. --SED=$lt_SED -+# _LT_PROG_CXX -+# ------------ -+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ -+# compiler, we have our own version here. -+m4_defun([_LT_PROG_CXX], -+[ -+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) -+AC_PROG_CXX -+if test -n "$CXX" && ( test "X$CXX" != "Xno" && -+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || -+ (test "X$CXX" != "Xg++"))) ; then -+ AC_PROG_CXXCPP -+else -+ _lt_caught_CXX_error=yes -+fi -+popdef([AC_MSG_ERROR]) -+])# _LT_PROG_CXX -+ -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([_LT_PROG_CXX], []) - --# Sed that helps us avoid accidentally triggering echo(1) options like -n. --Xsed="$SED -e s/^X//" - --# The HP-UX ksh and POSIX shell print the target directory to stdout --# if CDPATH is set. --if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi -+# _LT_LANG_CXX_CONFIG([TAG]) -+# -------------------------- -+# Ensure that the configuration variables for a C++ compiler are suitably -+# defined. These variables are subsequently used by _LT_CONFIG to write -+# the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_CXX_CONFIG], -+[AC_REQUIRE([_LT_PROG_CXX])dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_DECL_EGREP])dnl -+ -+AC_LANG_PUSH(C++) -+_LT_TAGVAR(archive_cmds_need_lc, $1)=no -+_LT_TAGVAR(allow_undefined_flag, $1)= -+_LT_TAGVAR(always_export_symbols, $1)=no -+_LT_TAGVAR(archive_expsym_cmds, $1)= -+_LT_TAGVAR(compiler_needs_object, $1)=no -+_LT_TAGVAR(export_dynamic_flag_spec, $1)= -+_LT_TAGVAR(hardcode_direct, $1)=no -+_LT_TAGVAR(hardcode_direct_absolute, $1)=no -+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -+_LT_TAGVAR(hardcode_libdir_separator, $1)= -+_LT_TAGVAR(hardcode_minus_L, $1)=no -+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -+_LT_TAGVAR(hardcode_automatic, $1)=no -+_LT_TAGVAR(inherit_rpath, $1)=no -+_LT_TAGVAR(module_cmds, $1)= -+_LT_TAGVAR(module_expsym_cmds, $1)= -+_LT_TAGVAR(link_all_deplibs, $1)=unknown -+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -+_LT_TAGVAR(no_undefined_flag, $1)= -+_LT_TAGVAR(whole_archive_flag_spec, $1)= -+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - --# The names of the tagged configurations supported by this script. --available_tags= -+# Source file extension for C++ test sources. -+ac_ext=cpp - --# ### BEGIN LIBTOOL CONFIG], --[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) -+# Object file extension for compiled C++ test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext - --# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -+# No sense in running all these tests if we already determined that -+# the CXX compiler isn't working. Some variables (like enable_shared) -+# are currently assumed to apply to all compilers on this platform, -+# and will be corrupted by setting them based on a non-working compiler. -+if test "$_lt_caught_CXX_error" != yes; then -+ # Code to be used in simple compile tests -+ lt_simple_compile_test_code="int some_variable = 0;" -+ -+ # Code to be used in simple link tests -+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' -+ -+ # ltmain only uses $CC for tagged configurations so make sure $CC is set. -+ _LT_TAG_COMPILER -+ -+ # save warnings/boilerplate of simple test code -+ _LT_COMPILER_BOILERPLATE -+ _LT_LINKER_BOILERPLATE -+ -+ # Allow CC to be a program name with arguments. -+ lt_save_CC=$CC -+ lt_save_LD=$LD -+ lt_save_GCC=$GCC -+ GCC=$GXX -+ lt_save_with_gnu_ld=$with_gnu_ld -+ lt_save_path_LD=$lt_cv_path_LD -+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then -+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx -+ else -+ $as_unset lt_cv_prog_gnu_ld -+ fi -+ if test -n "${lt_cv_path_LDCXX+set}"; then -+ lt_cv_path_LD=$lt_cv_path_LDCXX -+ else -+ $as_unset lt_cv_path_LD -+ fi -+ test -z "${LDCXX+set}" || LD=$LDCXX -+ CC=${CXX-"c++"} -+ compiler=$CC -+ _LT_TAGVAR(compiler, $1)=$CC -+ _LT_CC_BASENAME([$compiler]) -+ -+ if test -n "$compiler"; then -+ # We don't want -fno-exception when compiling C++ code, so set the -+ # no_builtin_flag separately -+ if test "$GXX" = yes; then -+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -+ else -+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -+ fi -+ -+ if test "$GXX" = yes; then -+ # Set up default GNU C++ configuration -+ -+ LT_PATH_LD -+ -+ # Check if GNU C++ uses GNU ld as the underlying linker, since the -+ # archiving commands below assume that GNU ld is being used. -+ if test "$with_gnu_ld" = yes; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+ -+ # If archive_cmds runs LD, not CC, wlarc should be empty -+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to -+ # investigate it a little bit more. (MM) -+ wlarc='${wl}' -+ -+ # ancient GNU ld didn't support --whole-archive et. al. -+ if eval "`$CC -print-prog-name=ld` --help 2>&1" | -+ $GREP 'no-whole-archive' > /dev/null; then -+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -+ else -+ _LT_TAGVAR(whole_archive_flag_spec, $1)= -+ fi -+ else -+ with_gnu_ld=no -+ wlarc= -+ -+ # A generic and very simple default shared library creation -+ # command for GNU C++ for the case where it uses the native -+ # linker, instead of GNU ld. If possible, this setting should -+ # overridden to take advantage of the native linker features on -+ # the platform it is being used on. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' -+ fi -+ -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ -+ else -+ GXX=no -+ with_gnu_ld=no -+ wlarc= -+ fi -+ -+ # PORTME: fill in a description of your system's C++ link characteristics -+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -+ _LT_TAGVAR(ld_shlibs, $1)=yes -+ case $host_os in -+ aix3*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ aix[[4-9]]*) -+ if test "$host_cpu" = ia64; then -+ # On IA64, the linker does run time linking by default, so we don't -+ # have to do anything special. -+ aix_use_runtimelinking=no -+ exp_sym_flag='-Bexport' -+ no_entry_flag="" -+ else -+ aix_use_runtimelinking=no -+ -+ # Test if we are trying to use run time linking or normal -+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we -+ # need to do runtime linking. -+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) -+ for ld_flag in $LDFLAGS; do -+ case $ld_flag in -+ *-brtl*) -+ aix_use_runtimelinking=yes -+ break -+ ;; -+ esac -+ done -+ ;; -+ esac -+ -+ exp_sym_flag='-bexport' -+ no_entry_flag='-bnoentry' -+ fi -+ -+ # When large executables or shared objects are built, AIX ld can -+ # have problems creating the table of contents. If linking a library -+ # or program results in "error TOC overflow" add -mminimal-toc to -+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not -+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -+ -+ _LT_TAGVAR(archive_cmds, $1)='' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' -+ -+ if test "$GXX" = yes; then -+ case $host_os in aix4.[[012]]|aix4.[[012]].*) -+ # We only want to do this on AIX 4.2 and lower, the check -+ # below for broken collect2 doesn't work under 4.3+ -+ collect2name=`${CC} -print-prog-name=collect2` -+ if test -f "$collect2name" && -+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null -+ then -+ # We have reworked collect2 -+ : -+ else -+ # We have old collect2 -+ _LT_TAGVAR(hardcode_direct, $1)=unsupported -+ # It fails to find uninstalled libraries when the uninstalled -+ # path is not listed in the libpath. Setting hardcode_minus_L -+ # to unsupported forces relinking -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)= -+ fi -+ esac -+ shared_flag='-shared' -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag="$shared_flag "'${wl}-G' -+ fi -+ else -+ # not using gcc -+ if test "$host_cpu" = ia64; then -+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release -+ # chokes on -Wl,-G. The following line is correct: -+ shared_flag='-G' -+ else -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag='${wl}-G' -+ else -+ shared_flag='${wl}-bM:SRE' -+ fi -+ fi -+ fi -+ -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' -+ # It seems that -bexpall does not export symbols beginning with -+ # underscore (_), so it is better to generate a list of symbols to -+ # export. -+ _LT_TAGVAR(always_export_symbols, $1)=yes -+ if test "$aix_use_runtimelinking" = yes; then -+ # Warning - without using the other runtime loading flags (-brtl), -+ # -berok will link without error, but may produce a broken library. -+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' -+ # Determine the default libpath from the value encoded in an empty -+ # executable. -+ _LT_SYS_MODULE_PATH_AIX -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -+ -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" -+ else -+ if test "$host_cpu" = ia64; then -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' -+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" -+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" -+ else -+ # Determine the default libpath from the value encoded in an -+ # empty executable. -+ _LT_SYS_MODULE_PATH_AIX -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -+ # Warning - without using the other run time loading flags, -+ # -berok will link without error, but may produce a broken library. -+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' -+ # Exported symbols can be pulled into shared objects from archives -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes -+ # This is similar to how AIX traditionally builds its shared -+ # libraries. -+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -+ fi -+ fi -+ ;; -+ -+ beos*) -+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ # Joseph Beckenbach says some releases of gcc -+ # support --undefined. This deserves some investigation. FIXME -+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; - --# Shell to use when invoking shell scripts. --SHELL=$lt_SHELL -+ chorus*) -+ case $cc_basename in -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac -+ ;; -+ -+ cygwin* | mingw* | pw32* | cegcc*) -+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, -+ # as there is no search path for DLLs. -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ _LT_TAGVAR(always_export_symbols, $1)=no -+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -+ -+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ # If the export-symbols file already is a .def file (1st line -+ # is EXPORTS), use it as is; otherwise, prepend... -+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ cp $export_symbols $output_objdir/$soname.def; -+ else -+ echo EXPORTS > $output_objdir/$soname.def; -+ cat $export_symbols >> $output_objdir/$soname.def; -+ fi~ -+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ darwin* | rhapsody*) -+ _LT_DARWIN_LINKER_FEATURES($1) -+ ;; -+ -+ dgux*) -+ case $cc_basename in -+ ec++*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ ghcx*) -+ # Green Hills C++ Compiler -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac -+ ;; - --# Whether or not to build shared libraries. --build_libtool_libs=$enable_shared -+ freebsd[[12]]*) -+ # C++ shared libraries reported to be fairly broken before -+ # switch to ELF -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; - --# Whether or not to build static libraries. --build_old_libs=$enable_static -+ freebsd-elf*) -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ ;; - --# Whether or not to add -lc for building shared libraries. --build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) -+ freebsd* | dragonfly*) -+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF -+ # conventions -+ _LT_TAGVAR(ld_shlibs, $1)=yes -+ ;; - --# Whether or not to disallow shared libs when runtime libs are static --allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) -+ gnu*) -+ ;; - --# Whether or not to optimize for fast installation. --fast_install=$enable_fast_install -+ hpux9*) -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, -+ # but as the default -+ # location of the library. -+ -+ case $cc_basename in -+ CC*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ aCC*) -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ ;; -+ *) -+ if test "$GXX" = yes; then -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ else -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ esac -+ ;; - --# The host system. --host_alias=$host_alias --host=$host -+ hpux10*|hpux11*) -+ if test $with_gnu_ld = no; then -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ -+ case $host_cpu in -+ hppa*64*|ia64*) -+ ;; -+ *) -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ ;; -+ esac -+ fi -+ case $host_cpu in -+ hppa*64*|ia64*) -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ *) -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, -+ # but as the default -+ # location of the library. -+ ;; -+ esac - --# An echo program that does not interpret backslashes. --echo=$lt_echo -+ case $cc_basename in -+ CC*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ aCC*) -+ case $host_cpu in -+ hppa*64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ ia64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ esac -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ ;; -+ *) -+ if test "$GXX" = yes; then -+ if test $with_gnu_ld = no; then -+ case $host_cpu in -+ hppa*64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ ia64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ esac -+ fi -+ else -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ esac -+ ;; - --# The archiver. --AR=$lt_AR --AR_FLAGS=$lt_AR_FLAGS -+ interix[[3-9]]*) -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. -+ # Instead, shared libraries are loaded at an image base (0x10000000 by -+ # default) and relocated if they conflict, which is a slow very memory -+ # consuming and fragmenting process. To avoid this, we pick a random, -+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link -+ # time. Moving up from 0x10000000 also allows more sbrk(2) space. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' -+ ;; -+ irix5* | irix6*) -+ case $cc_basename in -+ CC*) -+ # SGI C++ -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ -+ # Archives containing C++ object files must be created using -+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is -+ # necessary to make sure instantiated templates are included -+ # in the archive. -+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' -+ ;; -+ *) -+ if test "$GXX" = yes; then -+ if test "$with_gnu_ld" = no; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' -+ fi -+ fi -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ ;; -+ esac -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ _LT_TAGVAR(inherit_rpath, $1)=yes -+ ;; - --# A C compiler. --LTCC=$lt_LTCC -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ case $cc_basename in -+ KCC*) -+ # Kuck and Associates, Inc. (KAI) C++ Compiler -+ -+ # KCC will only create a shared library if the output file -+ # ends with ".so" (or ".sl" for HP-UX), so rename the library -+ # to its proper name (with version) after linking. -+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+ -+ # Archives containing C++ object files must be created using -+ # "CC -Bstatic", where "CC" is the KAI C++ compiler. -+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' -+ ;; -+ icpc* | ecpc* ) -+ # Intel C++ -+ with_gnu_ld=yes -+ # version 8.0 and above of icpc choke on multiply defined symbols -+ # if we add $predep_objects and $postdep_objects, however 7.1 and -+ # earlier do not add the objects themselves. -+ case `$CC -V 2>&1` in -+ *"Version 7."*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ ;; -+ *) # Version 8.0 or newer -+ tmp_idyn= -+ case $host_cpu in -+ ia64*) tmp_idyn=' -i_dynamic';; -+ esac -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ ;; -+ esac -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' -+ ;; -+ pgCC* | pgcpp*) -+ # Portland Group C++ compiler -+ case `$CC -V` in -+ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) -+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ -+ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' -+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ -+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ -+ $RANLIB $oldlib' -+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ -+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ -+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' -+ ;; -+ *) # Version 6 will use weak symbols -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' -+ ;; -+ esac - --# A language-specific compiler. --CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ ;; -+ cxx*) -+ # Compaq C++ -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - --# Is the compiler the GNU C compiler? --with_gcc=$_LT_AC_TAGVAR(GCC, $1) -+ runpath_var=LD_RUN_PATH -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: - --# An ERE matcher. --EGREP=$lt_EGREP -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ ;; -+ xl*) -+ # IBM XL 8.0 on PPC, with GNU ld -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ if test "x$supports_anon_versioning" = xyes; then -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ -+ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ -+ echo "local: *; };" >> $output_objdir/$libname.ver~ -+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' -+ fi -+ ;; -+ *) -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C++ 5.9 -+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ _LT_TAGVAR(compiler_needs_object, $1)=yes -+ -+ # Not sure whether something based on -+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 -+ # would be better. -+ output_verbose_link_cmd='echo' -+ -+ # Archives containing C++ object files must be created using -+ # "CC -xar", where "CC" is the Sun C++ compiler. This is -+ # necessary to make sure instantiated templates are included -+ # in the archive. -+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' -+ ;; -+ esac -+ ;; -+ esac -+ ;; - --# The linker used to build libraries. --LD=$lt_[]_LT_AC_TAGVAR(LD, $1) -+ lynxos*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; - --# Whether we need hard or soft links. --LN_S=$lt_LN_S -+ m88k*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; - --# A BSD-compatible nm program. --NM=$lt_NM -+ mvs*) -+ case $cc_basename in -+ cxx*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac -+ ;; - --# A symbol stripping program --STRIP=$lt_STRIP -+ netbsd*) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' -+ wlarc= -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ fi -+ # Workaround some broken pre-1.5 toolchains -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' -+ ;; - --# Used to examine libraries when file_magic_cmd begins "file" --MAGIC_CMD=$MAGIC_CMD -+ *nto* | *qnx*) -+ _LT_TAGVAR(ld_shlibs, $1)=yes -+ ;; - --# Used on cygwin: DLL creation program. --DLLTOOL="$DLLTOOL" -+ openbsd2*) -+ # C++ shared libraries are fairly broken -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ -+ openbsd*) -+ if test -f /usr/libexec/ld.so; then -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -+ fi -+ output_verbose_link_cmd=echo -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; - --# Used on cygwin: object dumper. --OBJDUMP="$OBJDUMP" -+ osf3* | osf4* | osf5*) -+ case $cc_basename in -+ KCC*) -+ # Kuck and Associates, Inc. (KAI) C++ Compiler -+ -+ # KCC will only create a shared library if the output file -+ # ends with ".so" (or ".sl" for HP-UX), so rename the library -+ # to its proper name (with version) after linking. -+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' -+ -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ -+ # Archives containing C++ object files must be created using -+ # the KAI C++ compiler. -+ case $host in -+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; -+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; -+ esac -+ ;; -+ RCC*) -+ # Rational C++ 2.4.1 -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ cxx*) -+ case $host in -+ osf3*) -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ ;; -+ *) -+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ -+ echo "-hidden">> $lib.exp~ -+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ -+ $RM $lib.exp' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' -+ ;; -+ esac - --# Used on cygwin: assembler. --AS="$AS" -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: - --# The name of the directory that contains temporary libtool files. --objdir=$objdir -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ ;; -+ *) -+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -+ case $host in -+ osf3*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ ;; -+ esac -+ -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ -+ else -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ esac -+ ;; - --# How to create reloadable object files. --reload_flag=$lt_reload_flag --reload_cmds=$lt_reload_cmds -+ psos*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; - --# How to pass a linker flag through the compiler. --wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) -+ sunos4*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.x -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ lcc*) -+ # Lucid -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac -+ ;; - --# Object file suffix (normally "o"). --objext="$ac_objext" -+ solaris*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.2, 5.x and Centerline C++ -+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes -+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' -+ -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ case $host_os in -+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; -+ *) -+ # The compiler driver will combine and reorder linker options, -+ # but understands `-z linker_flag'. -+ # Supported since Solaris 2.6 (maybe 2.5.1?) -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' -+ ;; -+ esac -+ _LT_TAGVAR(link_all_deplibs, $1)=yes - --# Old archive suffix (normally "a"). --libext="$libext" -+ output_verbose_link_cmd='echo' - --# Shared library suffix (normally ".so"). --shrext_cmds='$shrext_cmds' -+ # Archives containing C++ object files must be created using -+ # "CC -xar", where "CC" is the Sun C++ compiler. This is -+ # necessary to make sure instantiated templates are included -+ # in the archive. -+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' -+ ;; -+ gcx*) -+ # Green Hills C++ Compiler -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - --# Executable file suffix (normally ""). --exeext="$exeext" -+ # The C++ compiler must be used to create the archive. -+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' -+ ;; -+ *) -+ # GNU C++ compiler with Solaris linker -+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then -+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' -+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' -+ -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ else -+ # g++ 2.7 appears to require `-G' NOT `-shared' on this -+ # platform. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' -+ -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ fi -+ -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' -+ case $host_os in -+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; -+ *) -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' -+ ;; -+ esac -+ fi -+ ;; -+ esac -+ ;; - --# Additional compiler flags for building library objects. --pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) --pic_mode=$pic_mode -+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) -+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ runpath_var='LD_RUN_PATH' - --# What is the maximum length of a command? --max_cmd_len=$lt_cv_sys_max_cmd_len -+ case $cc_basename in -+ CC*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ esac -+ ;; - --# Does compiler simultaneously support -c and -o options? --compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) -+ sysv5* | sco3.2v5* | sco5v6*) -+ # Note: We can NOT use -z defs as we might desire, because we do not -+ # link with -lc, and that would cause any symbols used from libc to -+ # always be unresolved, which means just about no library would -+ # ever link correctly. If we're not using GNU ld we use -z text -+ # though, which does catch some bad symbols but isn't as heavy-handed -+ # as -z defs. -+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' -+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' -+ runpath_var='LD_RUN_PATH' - --# Must we lock files when doing compilation ? --need_locks=$lt_need_locks -+ case $cc_basename in -+ CC*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ esac -+ ;; - --# Do we need the lib prefix for modules? --need_lib_prefix=$need_lib_prefix -+ tandem*) -+ case $cc_basename in -+ NCC*) -+ # NonStop-UX NCC 3.20 -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac -+ ;; - --# Do we need a version for libraries? --need_version=$need_version -+ vxworks*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; - --# Whether dlopen is supported. --dlopen_support=$enable_dlopen -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac - --# Whether dlopen of programs is supported. --dlopen_self=$enable_dlopen_self -+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - --# Whether dlopen of statically linked programs is supported. --dlopen_self_static=$enable_dlopen_self_static -+ _LT_TAGVAR(GCC, $1)="$GXX" -+ _LT_TAGVAR(LD, $1)="$LD" - --# Compiler flag to prevent dynamic linking. --link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) -+ ## CAVEAT EMPTOR: -+ ## There is no encapsulation within the following macros, do not change -+ ## the running order or otherwise move them around unless you know exactly -+ ## what you are doing... -+ _LT_SYS_HIDDEN_LIBDEPS($1) -+ _LT_COMPILER_PIC($1) -+ _LT_COMPILER_C_O($1) -+ _LT_COMPILER_FILE_LOCKS($1) -+ _LT_LINKER_SHLIBS($1) -+ _LT_SYS_DYNAMIC_LINKER($1) -+ _LT_LINKER_HARDCODE_LIBPATH($1) -+ -+ _LT_CONFIG($1) -+ fi # test -n "$compiler" -+ -+ CC=$lt_save_CC -+ LDCXX=$LD -+ LD=$lt_save_LD -+ GCC=$lt_save_GCC -+ with_gnu_ld=$lt_save_with_gnu_ld -+ lt_cv_path_LDCXX=$lt_cv_path_LD -+ lt_cv_path_LD=$lt_save_path_LD -+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -+fi # test "$_lt_caught_CXX_error" != yes - --# Compiler flag to turn off builtin functions. --no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -+AC_LANG_POP -+])# _LT_LANG_CXX_CONFIG - --# Compiler flag to allow reflexive dlopens. --export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) - --# Compiler flag to generate shared objects directly from archives. --whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) -+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) -+# --------------------------------- -+# Figure out "hidden" library dependencies from verbose -+# compiler output when linking a shared library. -+# Parse the compiler output and extract the necessary -+# objects, libraries and library flags. -+m4_defun([_LT_SYS_HIDDEN_LIBDEPS], -+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+# Dependencies to place before and after the object being linked: -+_LT_TAGVAR(predep_objects, $1)= -+_LT_TAGVAR(postdep_objects, $1)= -+_LT_TAGVAR(predeps, $1)= -+_LT_TAGVAR(postdeps, $1)= -+_LT_TAGVAR(compiler_lib_search_path, $1)= - --# Compiler flag to generate thread-safe objects. --thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) -+dnl we can't use the lt_simple_compile_test_code here, -+dnl because it contains code intended for an executable, -+dnl not a library. It's possible we should let each -+dnl tag define a new lt_????_link_test_code variable, -+dnl but it's only used here... -+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF -+int a; -+void foo (void) { a = 0; } -+_LT_EOF -+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF -+class Foo -+{ -+public: -+ Foo (void) { a = 0; } -+private: -+ int a; -+}; -+_LT_EOF -+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF -+ subroutine foo -+ implicit none -+ integer*4 a -+ a=0 -+ return -+ end -+_LT_EOF -+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF -+ subroutine foo -+ implicit none -+ integer a -+ a=0 -+ return -+ end -+_LT_EOF -+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF -+public class foo { -+ private int a; -+ public void bar (void) { -+ a = 0; -+ } -+}; -+_LT_EOF -+]) -+dnl Parse the compiler output and extract the necessary -+dnl objects, libraries and library flags. -+if AC_TRY_EVAL(ac_compile); then -+ # Parse the compiler output and extract the necessary -+ # objects, libraries and library flags. - --# Library versioning type. --version_type=$version_type -+ # Sentinel used to keep track of whether or not we are before -+ # the conftest object file. -+ pre_test_object_deps_done=no - --# Format of library name prefix. --libname_spec=$lt_libname_spec -+ for p in `eval "$output_verbose_link_cmd"`; do -+ case $p in - --# List of archive names. First name is the real one, the rest are links. --# The last name is the one that the linker finds with -lNAME. --library_names_spec=$lt_library_names_spec -+ -L* | -R* | -l*) -+ # Some compilers place space between "-{L,R}" and the path. -+ # Remove the space. -+ if test $p = "-L" || -+ test $p = "-R"; then -+ prev=$p -+ continue -+ else -+ prev= -+ fi - --# The coded name of the library, if different from the real name. --soname_spec=$lt_soname_spec -+ if test "$pre_test_object_deps_done" = no; then -+ case $p in -+ -L* | -R*) -+ # Internal compiler library paths should come after those -+ # provided the user. The postdeps already come after the -+ # user supplied libs so there is no need to process them. -+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then -+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" -+ else -+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" -+ fi -+ ;; -+ # The "-l" case would never come before the object being -+ # linked, so don't bother handling this case. -+ esac -+ else -+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then -+ _LT_TAGVAR(postdeps, $1)="${prev}${p}" -+ else -+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" -+ fi -+ fi -+ ;; - --# Commands used to build and install an old-style archive. --RANLIB=$lt_RANLIB --old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) --old_postinstall_cmds=$lt_old_postinstall_cmds --old_postuninstall_cmds=$lt_old_postuninstall_cmds -+ *.$objext) -+ # This assumes that the test object file only shows up -+ # once in the compiler output. -+ if test "$p" = "conftest.$objext"; then -+ pre_test_object_deps_done=yes -+ continue -+ fi - --# Create an old-style archive from a shared archive. --old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) -+ if test "$pre_test_object_deps_done" = no; then -+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then -+ _LT_TAGVAR(predep_objects, $1)="$p" -+ else -+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" -+ fi -+ else -+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then -+ _LT_TAGVAR(postdep_objects, $1)="$p" -+ else -+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" -+ fi -+ fi -+ ;; - --# Create a temporary old-style archive to link instead of a shared archive. --old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) -+ *) ;; # Ignore the rest. - --# Commands used to build and install a shared archive. --archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) --archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) --postinstall_cmds=$lt_postinstall_cmds --postuninstall_cmds=$lt_postuninstall_cmds -+ esac -+ done - --# Commands used to build a loadable module (assumed same as above if empty) --module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) --module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) -+ # Clean up. -+ rm -f a.out a.exe -+else -+ echo "libtool.m4: error: problem compiling $1 test program" -+fi - --# Commands to strip libraries. --old_striplib=$lt_old_striplib --striplib=$lt_striplib -+$RM -f confest.$objext - --# Dependencies to place before the objects being linked to create a --# shared library. --predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) -+# PORTME: override above test on systems where it is broken -+m4_if([$1], [CXX], -+[case $host_os in -+interix[[3-9]]*) -+ # Interix 3.5 installs completely hosed .la files for C++, so rather than -+ # hack all around it, let's just trust "g++" to DTRT. -+ _LT_TAGVAR(predep_objects,$1)= -+ _LT_TAGVAR(postdep_objects,$1)= -+ _LT_TAGVAR(postdeps,$1)= -+ ;; - --# Dependencies to place after the objects being linked to create a --# shared library. --postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) -+linux*) -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C++ 5.9 -+ -+ # The more standards-conforming stlport4 library is -+ # incompatible with the Cstd library. Avoid specifying -+ # it if it's in CXXFLAGS. Ignore libCrun as -+ # -library=stlport4 depends on it. -+ case " $CXX $CXXFLAGS " in -+ *" -library=stlport4 "*) -+ solaris_use_stlport4=yes -+ ;; -+ esac - --# Dependencies to place before the objects being linked to create a --# shared library. --predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) -+ if test "$solaris_use_stlport4" != yes; then -+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' -+ fi -+ ;; -+ esac -+ ;; - --# Dependencies to place after the objects being linked to create a --# shared library. --postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) -+solaris*) -+ case $cc_basename in -+ CC*) -+ # The more standards-conforming stlport4 library is -+ # incompatible with the Cstd library. Avoid specifying -+ # it if it's in CXXFLAGS. Ignore libCrun as -+ # -library=stlport4 depends on it. -+ case " $CXX $CXXFLAGS " in -+ *" -library=stlport4 "*) -+ solaris_use_stlport4=yes -+ ;; -+ esac - --# The library search path used internally by the compiler when linking --# a shared library. --compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) -+ # Adding this requires a known-good setup of shared libraries for -+ # Sun compiler versions before 5.6, else PIC objects from an old -+ # archive will be linked into the output, leading to subtle bugs. -+ if test "$solaris_use_stlport4" != yes; then -+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' -+ fi -+ ;; -+ esac -+ ;; -+esac -+]) - --# Method to check whether dependent libraries are shared objects. --deplibs_check_method=$lt_deplibs_check_method -+case " $_LT_TAGVAR(postdeps, $1) " in -+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; -+esac -+ _LT_TAGVAR(compiler_lib_search_dirs, $1)= -+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then -+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -+fi -+_LT_TAGDECL([], [compiler_lib_search_dirs], [1], -+ [The directories searched by this compiler when creating a shared library]) -+_LT_TAGDECL([], [predep_objects], [1], -+ [Dependencies to place before and after the objects being linked to -+ create a shared library]) -+_LT_TAGDECL([], [postdep_objects], [1]) -+_LT_TAGDECL([], [predeps], [1]) -+_LT_TAGDECL([], [postdeps], [1]) -+_LT_TAGDECL([], [compiler_lib_search_path], [1], -+ [The library search path used internally by the compiler when linking -+ a shared library]) -+])# _LT_SYS_HIDDEN_LIBDEPS - --# Command to use when deplibs_check_method == file_magic. --file_magic_cmd=$lt_file_magic_cmd - --# Flag that allows shared libraries with undefined symbols to be built. --allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) -+# _LT_PROG_F77 -+# ------------ -+# Since AC_PROG_F77 is broken, in that it returns the empty string -+# if there is no fortran compiler, we have our own version here. -+m4_defun([_LT_PROG_F77], -+[ -+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) -+AC_PROG_F77 -+if test -z "$F77" || test "X$F77" = "Xno"; then -+ _lt_disable_F77=yes -+fi -+popdef([AC_MSG_ERROR]) -+])# _LT_PROG_F77 - --# Flag that forces no undefined symbols. --no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([_LT_PROG_F77], []) - --# Commands used to finish a libtool library installation in a directory. --finish_cmds=$lt_finish_cmds - --# Same as above, but a single script fragment to be evaled but not shown. --finish_eval=$lt_finish_eval -+# _LT_LANG_F77_CONFIG([TAG]) -+# -------------------------- -+# Ensure that the configuration variables for a Fortran 77 compiler are -+# suitably defined. These variables are subsequently used by _LT_CONFIG -+# to write the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_F77_CONFIG], -+[AC_REQUIRE([_LT_PROG_F77])dnl -+AC_LANG_PUSH(Fortran 77) - --# Take the output of nm and produce a listing of raw symbols and C names. --global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -+_LT_TAGVAR(archive_cmds_need_lc, $1)=no -+_LT_TAGVAR(allow_undefined_flag, $1)= -+_LT_TAGVAR(always_export_symbols, $1)=no -+_LT_TAGVAR(archive_expsym_cmds, $1)= -+_LT_TAGVAR(export_dynamic_flag_spec, $1)= -+_LT_TAGVAR(hardcode_direct, $1)=no -+_LT_TAGVAR(hardcode_direct_absolute, $1)=no -+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -+_LT_TAGVAR(hardcode_libdir_separator, $1)= -+_LT_TAGVAR(hardcode_minus_L, $1)=no -+_LT_TAGVAR(hardcode_automatic, $1)=no -+_LT_TAGVAR(inherit_rpath, $1)=no -+_LT_TAGVAR(module_cmds, $1)= -+_LT_TAGVAR(module_expsym_cmds, $1)= -+_LT_TAGVAR(link_all_deplibs, $1)=unknown -+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -+_LT_TAGVAR(no_undefined_flag, $1)= -+_LT_TAGVAR(whole_archive_flag_spec, $1)= -+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - --# Transform the output of nm in a proper C declaration --global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -+# Source file extension for f77 test sources. -+ac_ext=f - --# Transform the output of nm in a C name address pair --global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -+# Object file extension for compiled f77 test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext - --# This is the shared library runtime path variable. --runpath_var=$runpath_var -+# No sense in running all these tests if we already determined that -+# the F77 compiler isn't working. Some variables (like enable_shared) -+# are currently assumed to apply to all compilers on this platform, -+# and will be corrupted by setting them based on a non-working compiler. -+if test "$_lt_disable_F77" != yes; then -+ # Code to be used in simple compile tests -+ lt_simple_compile_test_code="\ -+ subroutine t -+ return -+ end -+" - --# This is the shared library path variable. --shlibpath_var=$shlibpath_var -+ # Code to be used in simple link tests -+ lt_simple_link_test_code="\ -+ program t -+ end -+" - --# Is shlibpath searched before the hard-coded library search path? --shlibpath_overrides_runpath=$shlibpath_overrides_runpath -+ # ltmain only uses $CC for tagged configurations so make sure $CC is set. -+ _LT_TAG_COMPILER - --# How to hardcode a shared library path into an executable. --hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) -+ # save warnings/boilerplate of simple test code -+ _LT_COMPILER_BOILERPLATE -+ _LT_LINKER_BOILERPLATE -+ -+ # Allow CC to be a program name with arguments. -+ lt_save_CC="$CC" -+ lt_save_GCC=$GCC -+ CC=${F77-"f77"} -+ compiler=$CC -+ _LT_TAGVAR(compiler, $1)=$CC -+ _LT_CC_BASENAME([$compiler]) -+ GCC=$G77 -+ if test -n "$compiler"; then -+ AC_MSG_CHECKING([if libtool supports shared libraries]) -+ AC_MSG_RESULT([$can_build_shared]) - --# Whether we should hardcode library paths into libraries. --hardcode_into_libs=$hardcode_into_libs -+ AC_MSG_CHECKING([whether to build shared libraries]) -+ test "$can_build_shared" = "no" && enable_shared=no - --# Flag to hardcode \$libdir into a binary during linking. --# This must work even if \$libdir does not exist. --hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) -+ # On AIX, shared libraries and static libraries use the same namespace, and -+ # are all built from PIC. -+ case $host_os in -+ aix3*) -+ test "$enable_shared" = yes && enable_static=no -+ if test -n "$RANLIB"; then -+ archive_cmds="$archive_cmds~\$RANLIB \$lib" -+ postinstall_cmds='$RANLIB $lib' -+ fi -+ ;; -+ aix[[4-9]]*) -+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then -+ test "$enable_shared" = yes && enable_static=no -+ fi -+ ;; -+ esac -+ AC_MSG_RESULT([$enable_shared]) - --# If ld is used when linking, flag to hardcode \$libdir into --# a binary during linking. This must work even if \$libdir does --# not exist. --hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) -+ AC_MSG_CHECKING([whether to build static libraries]) -+ # Make sure either enable_shared or enable_static is yes. -+ test "$enable_shared" = yes || enable_static=yes -+ AC_MSG_RESULT([$enable_static]) -+ -+ _LT_TAGVAR(GCC, $1)="$G77" -+ _LT_TAGVAR(LD, $1)="$LD" -+ -+ ## CAVEAT EMPTOR: -+ ## There is no encapsulation within the following macros, do not change -+ ## the running order or otherwise move them around unless you know exactly -+ ## what you are doing... -+ _LT_COMPILER_PIC($1) -+ _LT_COMPILER_C_O($1) -+ _LT_COMPILER_FILE_LOCKS($1) -+ _LT_LINKER_SHLIBS($1) -+ _LT_SYS_DYNAMIC_LINKER($1) -+ _LT_LINKER_HARDCODE_LIBPATH($1) -+ -+ _LT_CONFIG($1) -+ fi # test -n "$compiler" -+ -+ GCC=$lt_save_GCC -+ CC="$lt_save_CC" -+fi # test "$_lt_disable_F77" != yes - --# Whether we need a single -rpath flag with a separated argument. --hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) -+AC_LANG_POP -+])# _LT_LANG_F77_CONFIG - --# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the --# resulting binary. --hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) - --# Set to yes if using the -LDIR flag during linking hardcodes DIR into the --# resulting binary. --hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) -+# _LT_PROG_FC -+# ----------- -+# Since AC_PROG_FC is broken, in that it returns the empty string -+# if there is no fortran compiler, we have our own version here. -+m4_defun([_LT_PROG_FC], -+[ -+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) -+AC_PROG_FC -+if test -z "$FC" || test "X$FC" = "Xno"; then -+ _lt_disable_FC=yes -+fi -+popdef([AC_MSG_ERROR]) -+])# _LT_PROG_FC -+ -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([_LT_PROG_FC], []) -+ -+ -+# _LT_LANG_FC_CONFIG([TAG]) -+# ------------------------- -+# Ensure that the configuration variables for a Fortran compiler are -+# suitably defined. These variables are subsequently used by _LT_CONFIG -+# to write the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_FC_CONFIG], -+[AC_REQUIRE([_LT_PROG_FC])dnl -+AC_LANG_PUSH(Fortran) -+ -+_LT_TAGVAR(archive_cmds_need_lc, $1)=no -+_LT_TAGVAR(allow_undefined_flag, $1)= -+_LT_TAGVAR(always_export_symbols, $1)=no -+_LT_TAGVAR(archive_expsym_cmds, $1)= -+_LT_TAGVAR(export_dynamic_flag_spec, $1)= -+_LT_TAGVAR(hardcode_direct, $1)=no -+_LT_TAGVAR(hardcode_direct_absolute, $1)=no -+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -+_LT_TAGVAR(hardcode_libdir_separator, $1)= -+_LT_TAGVAR(hardcode_minus_L, $1)=no -+_LT_TAGVAR(hardcode_automatic, $1)=no -+_LT_TAGVAR(inherit_rpath, $1)=no -+_LT_TAGVAR(module_cmds, $1)= -+_LT_TAGVAR(module_expsym_cmds, $1)= -+_LT_TAGVAR(link_all_deplibs, $1)=unknown -+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -+_LT_TAGVAR(no_undefined_flag, $1)= -+_LT_TAGVAR(whole_archive_flag_spec, $1)= -+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - --# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into --# the resulting binary. --hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) -+# Source file extension for fc test sources. -+ac_ext=${ac_fc_srcext-f} - --# Set to yes if building a shared library automatically hardcodes DIR into the library --# and all subsequent libraries and executables linked against it. --hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) -+# Object file extension for compiled fc test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext - --# Variables whose values should be saved in libtool wrapper scripts and --# restored at relink time. --variables_saved_for_relink="$variables_saved_for_relink" -+# No sense in running all these tests if we already determined that -+# the FC compiler isn't working. Some variables (like enable_shared) -+# are currently assumed to apply to all compilers on this platform, -+# and will be corrupted by setting them based on a non-working compiler. -+if test "$_lt_disable_FC" != yes; then -+ # Code to be used in simple compile tests -+ lt_simple_compile_test_code="\ -+ subroutine t -+ return -+ end -+" - --# Whether libtool must link a program against all its dependency libraries. --link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) -+ # Code to be used in simple link tests -+ lt_simple_link_test_code="\ -+ program t -+ end -+" - --# Compile-time system search path for libraries --sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -+ # ltmain only uses $CC for tagged configurations so make sure $CC is set. -+ _LT_TAG_COMPILER - --# Run-time system search path for libraries --sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -+ # save warnings/boilerplate of simple test code -+ _LT_COMPILER_BOILERPLATE -+ _LT_LINKER_BOILERPLATE -+ -+ # Allow CC to be a program name with arguments. -+ lt_save_CC="$CC" -+ lt_save_GCC=$GCC -+ CC=${FC-"f95"} -+ compiler=$CC -+ GCC=$ac_cv_fc_compiler_gnu -+ -+ _LT_TAGVAR(compiler, $1)=$CC -+ _LT_CC_BASENAME([$compiler]) -+ -+ if test -n "$compiler"; then -+ AC_MSG_CHECKING([if libtool supports shared libraries]) -+ AC_MSG_RESULT([$can_build_shared]) - --# Fix the shell variable \$srcfile for the compiler. --fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" -+ AC_MSG_CHECKING([whether to build shared libraries]) -+ test "$can_build_shared" = "no" && enable_shared=no - --# Set to yes if exported symbols are required. --always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) -+ # On AIX, shared libraries and static libraries use the same namespace, and -+ # are all built from PIC. -+ case $host_os in -+ aix3*) -+ test "$enable_shared" = yes && enable_static=no -+ if test -n "$RANLIB"; then -+ archive_cmds="$archive_cmds~\$RANLIB \$lib" -+ postinstall_cmds='$RANLIB $lib' -+ fi -+ ;; -+ aix[[4-9]]*) -+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then -+ test "$enable_shared" = yes && enable_static=no -+ fi -+ ;; -+ esac -+ AC_MSG_RESULT([$enable_shared]) - --# The commands to list exported symbols. --export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) -+ AC_MSG_CHECKING([whether to build static libraries]) -+ # Make sure either enable_shared or enable_static is yes. -+ test "$enable_shared" = yes || enable_static=yes -+ AC_MSG_RESULT([$enable_static]) -+ -+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" -+ _LT_TAGVAR(LD, $1)="$LD" -+ -+ ## CAVEAT EMPTOR: -+ ## There is no encapsulation within the following macros, do not change -+ ## the running order or otherwise move them around unless you know exactly -+ ## what you are doing... -+ _LT_SYS_HIDDEN_LIBDEPS($1) -+ _LT_COMPILER_PIC($1) -+ _LT_COMPILER_C_O($1) -+ _LT_COMPILER_FILE_LOCKS($1) -+ _LT_LINKER_SHLIBS($1) -+ _LT_SYS_DYNAMIC_LINKER($1) -+ _LT_LINKER_HARDCODE_LIBPATH($1) -+ -+ _LT_CONFIG($1) -+ fi # test -n "$compiler" -+ -+ GCC=$lt_save_GCC -+ CC="$lt_save_CC" -+fi # test "$_lt_disable_FC" != yes - --# The commands to extract the exported symbol list from a shared archive. --extract_expsyms_cmds=$lt_extract_expsyms_cmds -+AC_LANG_POP -+])# _LT_LANG_FC_CONFIG - --# Symbols that should not be listed in the preloaded symbols. --exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) - --# Symbols that must always be exported. --include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) -+# _LT_LANG_GCJ_CONFIG([TAG]) -+# -------------------------- -+# Ensure that the configuration variables for the GNU Java Compiler compiler -+# are suitably defined. These variables are subsequently used by _LT_CONFIG -+# to write the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_GCJ_CONFIG], -+[AC_REQUIRE([LT_PROG_GCJ])dnl -+AC_LANG_SAVE - --ifelse([$1],[], --[# ### END LIBTOOL CONFIG], --[# ### END LIBTOOL TAG CONFIG: $tagname]) -+# Source file extension for Java test sources. -+ac_ext=java - --__EOF__ -+# Object file extension for compiled Java test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext - --ifelse([$1],[], [ -- case $host_os in -- aix3*) -- cat <<\EOF >> "$cfgfile" -+# Code to be used in simple compile tests -+lt_simple_compile_test_code="class foo {}" - --# AIX sometimes has problems with the GCC collect2 program. For some --# reason, if we set the COLLECT_NAMES environment variable, the problems --# vanish in a puff of smoke. --if test "X${COLLECT_NAMES+set}" != Xset; then -- COLLECT_NAMES= -- export COLLECT_NAMES --fi --EOF -- ;; -- esac -+# Code to be used in simple link tests -+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' - -- # We use sed instead of cat because bash on DJGPP gets confused if -- # if finds mixed CR/LF and LF-only lines. Since sed operates in -- # text mode, it properly converts lines to CR/LF. This bash problem -- # is reportedly fixed, but why not run on old versions too? -- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) -+# ltmain only uses $CC for tagged configurations so make sure $CC is set. -+_LT_TAG_COMPILER - -- mv -f "$cfgfile" "$ofile" || \ -- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") -- chmod +x "$ofile" --]) --else -- # If there is no Makefile yet, we rely on a make rule to execute -- # `config.status --recheck' to rerun these tests and create the -- # libtool script then. -- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` -- if test -f "$ltmain_in"; then -- test -f Makefile && make "$ltmain" -- fi --fi --])# AC_LIBTOOL_CONFIG -+# save warnings/boilerplate of simple test code -+_LT_COMPILER_BOILERPLATE -+_LT_LINKER_BOILERPLATE - -+# Allow CC to be a program name with arguments. -+lt_save_CC="$CC" -+lt_save_GCC=$GCC -+GCC=yes -+CC=${GCJ-"gcj"} -+compiler=$CC -+_LT_TAGVAR(compiler, $1)=$CC -+_LT_TAGVAR(LD, $1)="$LD" -+_LT_CC_BASENAME([$compiler]) - --# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) --# ------------------------------------------- --AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], --[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -+# GCJ did not exist at the time GCC didn't implicitly link libc in. -+_LT_TAGVAR(archive_cmds_need_lc, $1)=no - --_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds - --if test "$GCC" = yes; then -- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -+if test -n "$compiler"; then -+ _LT_COMPILER_NO_RTTI($1) -+ _LT_COMPILER_PIC($1) -+ _LT_COMPILER_C_O($1) -+ _LT_COMPILER_FILE_LOCKS($1) -+ _LT_LINKER_SHLIBS($1) -+ _LT_LINKER_HARDCODE_LIBPATH($1) - -- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], -- lt_cv_prog_compiler_rtti_exceptions, -- [-fno-rtti -fno-exceptions], [], -- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -+ _LT_CONFIG($1) - fi --])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI -- - --# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE --# --------------------------------- --AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], --[AC_REQUIRE([AC_CANONICAL_HOST]) --AC_REQUIRE([AC_PROG_NM]) --AC_REQUIRE([AC_OBJEXT]) --# Check for command to grab the raw symbol name followed by C symbol from nm. --AC_MSG_CHECKING([command to parse $NM output from $compiler object]) --AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], --[ --# These are sane defaults that work on at least a few old systems. --# [They come from Ultrix. What could be older than Ultrix?!! ;)] -+AC_LANG_RESTORE - --# Character class describing NM global symbol codes. --symcode='[[BCDEGRST]]' -+GCC=$lt_save_GCC -+CC="$lt_save_CC" -+])# _LT_LANG_GCJ_CONFIG - --# Regexp to match symbols that can be accessed directly from C. --sympat='$[[_A-Za-z]][[_A-Za-z0-9]]*$' - --# Transform the above into a raw symbol and a C symbol. --symxfrm='\1 \2\3 \3' -+# _LT_LANG_RC_CONFIG([TAG]) -+# ------------------------- -+# Ensure that the configuration variables for the Windows resource compiler -+# are suitably defined. These variables are subsequently used by _LT_CONFIG -+# to write the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_RC_CONFIG], -+[AC_REQUIRE([LT_PROG_RC])dnl -+AC_LANG_SAVE - --# Transform an extracted symbol line into a proper C declaration --lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* $.*$$/extern int \1;/p'" -+# Source file extension for RC test sources. -+ac_ext=rc - --# Transform an extracted symbol line into symbol name and symbol address --lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (lt_ptr) \&\2},/p'" -+# Object file extension for compiled RC test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext - --# Define system-specific variables. --case $host_os in --aix*) -- symcode='[[BCDT]]' -- ;; --cygwin* | mingw* | pw32*) -- symcode='[[ABCDGISTW]]' -- ;; --hpux*) # Its linker distinguishes data from code symbols -- if test "$host_cpu" = ia64; then -- symcode='[[ABCDEGRST]]' -- fi -- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" -- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (lt_ptr) \&\2},/p'" -- ;; --irix* | nonstopux*) -- symcode='[[BCDEGRST]]' -- ;; --osf*) -- symcode='[[BCDEGQRST]]' -- ;; --solaris* | sysv5*) -- symcode='[[BDRT]]' -- ;; --sysv4) -- symcode='[[DFNSTU]]' -- ;; --esac -+# Code to be used in simple compile tests -+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - --# Handle CRLF in mingw tool chain --opt_cr= --case $build_os in --mingw*) -- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp -- ;; --esac -+# Code to be used in simple link tests -+lt_simple_link_test_code="$lt_simple_compile_test_code" - --# If we're using GNU nm, then use its standard symbol codes. --case `$NM -V 2>&1` in --*GNU* | *'with BFD'*) -- symcode='[[ABCDGIRSTW]]' ;; --esac -+# ltmain only uses $CC for tagged configurations so make sure $CC is set. -+_LT_TAG_COMPILER - --# Try without a prefix undercore, then with it. --for ac_symprfx in "" "_"; do -+# save warnings/boilerplate of simple test code -+_LT_COMPILER_BOILERPLATE -+_LT_LINKER_BOILERPLATE - -- # Write the raw and C identifiers. -- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]$$symcode$symcode*$[[ ]][[ ]]*$$ac_symprfx$$sympat$opt_cr$/$symxfrm/p'" -+# Allow CC to be a program name with arguments. -+lt_save_CC="$CC" -+lt_save_GCC=$GCC -+GCC= -+CC=${RC-"windres"} -+compiler=$CC -+_LT_TAGVAR(compiler, $1)=$CC -+_LT_CC_BASENAME([$compiler]) -+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -- # Check to see that the pipe works correctly. -- pipe_works=no -+if test -n "$compiler"; then -+ : -+ _LT_CONFIG($1) -+fi - -- rm -f conftest* -- cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then -- # Try sorting and uniquifying the output. -- if sort "$nlist" | uniq > "$nlist"T; then -- mv -f "$nlist"T "$nlist" -- else -- rm -f "$nlist"T -- fi - -- # Make sure that we snagged all the symbols we need. -- if grep ' nm_test_var$' "$nlist" >/dev/null; then -- if grep ' nm_test_func$' "$nlist" >/dev/null; then -- cat < conftest.$ac_ext --#ifdef __cplusplus --extern "C" { --#endif -+# LT_PROG_GCJ -+# ----------- -+AC_DEFUN([LT_PROG_GCJ], -+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], -+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], -+ [AC_CHECK_TOOL(GCJ, gcj,) -+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" -+ AC_SUBST(GCJFLAGS)])])[]dnl -+]) - --EOF -- # Now generate the symbol file. -- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' -+# Old name: -+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([LT_AC_PROG_GCJ], []) - -- cat <> conftest.$ac_ext --#if defined (__STDC__) && __STDC__ --# define lt_ptr_t void * --#else --# define lt_ptr_t char * --# define const --#endif - --/* The mapping between symbol names and symbols. */ --const struct { -- const char *name; -- lt_ptr_t address; --} --lt_preloaded_symbols[[]] = --{ --EOF -- $SED "s/^$symcode$symcode* $.*$ $.*$$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext -- cat <<\EOF >> conftest.$ac_ext -- {0, (lt_ptr_t) 0} --}; -+# LT_PROG_RC -+# ---------- -+AC_DEFUN([LT_PROG_RC], -+[AC_CHECK_TOOL(RC, windres,) -+]) - --#ifdef __cplusplus --} --#endif --EOF -- # Now try linking the two files. -- mv conftest.$ac_objext conftstm.$ac_objext -- lt_save_LIBS="$LIBS" -- lt_save_CFLAGS="$CFLAGS" -- LIBS="conftstm.$ac_objext" -- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" -- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then -- pipe_works=yes -- fi -- LIBS="$lt_save_LIBS" -- CFLAGS="$lt_save_CFLAGS" -- else -- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD -- fi -- else -- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD -- fi -- else -- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD -- fi -- else -- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD -- cat conftest.$ac_ext >&5 -- fi -- rm -f conftest* conftst* -+# Old name: -+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([LT_AC_PROG_RC], []) - -- # Do not use the global_symbol_pipe unless it works. -- if test "$pipe_works" = yes; then -- break -- else -- lt_cv_sys_global_symbol_pipe= -- fi --done -+ -+# _LT_DECL_EGREP -+# -------------- -+# If we don't have a new enough Autoconf to choose the best grep -+# available, choose the one first in the user's PATH. -+m4_defun([_LT_DECL_EGREP], -+[AC_REQUIRE([AC_PROG_EGREP])dnl -+AC_REQUIRE([AC_PROG_FGREP])dnl -+test -z "$GREP" && GREP=grep -+_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) -+_LT_DECL([], [EGREP], [1], [An ERE matcher]) -+_LT_DECL([], [FGREP], [1], [A literal string matcher]) -+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too -+AC_SUBST([GREP]) - ]) --if test -z "$lt_cv_sys_global_symbol_pipe"; then -- lt_cv_sys_global_symbol_to_cdecl= --fi --if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then -- AC_MSG_RESULT(failed) --else -- AC_MSG_RESULT(ok) --fi --]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - - --# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) --# --------------------------------------- --AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], --[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= --_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= --_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= -+# _LT_DECL_OBJDUMP -+# -------------- -+# If we don't have a new enough Autoconf to choose the best objdump -+# available, choose the one first in the user's PATH. -+m4_defun([_LT_DECL_OBJDUMP], -+[AC_CHECK_TOOL(OBJDUMP, objdump, false) -+test -z "$OBJDUMP" && OBJDUMP=objdump -+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) -+AC_SUBST([OBJDUMP]) -+]) - --AC_MSG_CHECKING([for $compiler option to produce PIC]) -- ifelse([$1],[CXX],[ -- # C++ specific cases for pic, static, wl, etc. -- if test "$GXX" = yes; then -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - -- case $host_os in -- aix*) -- # All AIX code is PIC. -- if test "$host_cpu" = ia64; then -- # AIX 5 now supports IA64 processor -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- fi -- ;; -- amigaos*) -- # FIXME: we need at least 68020 code to build shared libraries, but -- # adding the `-m68020' flag to GCC prevents building anything better, -- # like `-m68040'. -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' -- ;; -- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) -- # PIC is the default for these OSes. -- ;; -- mingw* | os2* | pw32*) -- # This hack is so that the source file can tell whether it is being -- # built for inclusion in a dll (and should export symbols for example). -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' -- ;; -- darwin* | rhapsody*) -- # PIC is the default on this platform -- # Common symbols not allowed in MH_DYLIB files -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' -- ;; -- *djgpp*) -- # DJGPP does not support shared libraries at all -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -- ;; -- sysv4*MP*) -- if test -d /usr/nec; then -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic -- fi -- ;; -- hpux*) -- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -- # not for PA HP-UX. -- case "$host_cpu" in -- hppa*64*|ia64*) -- ;; -- *) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -- ;; -- esac -- ;; -- *) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -- ;; -- esac -- else -- case $host_os in -- aix4* | aix5*) -- # All AIX code is PIC. -- if test "$host_cpu" = ia64; then -- # AIX 5 now supports IA64 processor -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- else -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' -- fi -- ;; -- chorus*) -- case $cc_basename in -- cxch68) -- # Green Hills C++ Compiler -- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" -- ;; -- esac -- ;; -- dgux*) -- case $cc_basename in -- ec++) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -- ;; -- ghcx) -- # Green Hills C++ Compiler -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -- ;; -- *) -- ;; -- esac -- ;; -- freebsd* | kfreebsd*-gnu) -- # FreeBSD uses GNU C++ -- ;; -- hpux9* | hpux10* | hpux11*) -- case $cc_basename in -- CC) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" -- if test "$host_cpu" != ia64; then -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' -- fi -- ;; -- aCC) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" -- case "$host_cpu" in -- hppa*64*|ia64*) -- # +Z the default -- ;; -- *) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' -- ;; -- esac -- ;; -- *) -- ;; -- esac -- ;; -- irix5* | irix6* | nonstopux*) -- case $cc_basename in -- CC) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -- # CC pic flag -KPIC is the default. -- ;; -- *) -- ;; -- esac -- ;; -- linux*) -- case $cc_basename in -- KCC) -- # KAI C++ Compiler -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -- ;; -- icpc) -- # Intel C++ -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' -- ;; -- cxx) -- # Compaq C++ -- # Make sure the PIC flag is empty. It appears that all Alpha -- # Linux and Compaq Tru64 Unix objects are PIC. -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -- ;; -- *) -- ;; -- esac -- ;; -- lynxos*) -- ;; -- m88k*) -- ;; -- mvs*) -- case $cc_basename in -- cxx) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' -- ;; -- *) -- ;; -- esac -- ;; -- netbsd*) -- ;; -- osf3* | osf4* | osf5*) -- case $cc_basename in -- KCC) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' -- ;; -- RCC) -- # Rational C++ 2.4.1 -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -- ;; -- cxx) -- # Digital/Compaq C++ -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- # Make sure the PIC flag is empty. It appears that all Alpha -- # Linux and Compaq Tru64 Unix objects are PIC. -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -- ;; -- *) -- ;; -- esac -- ;; -- psos*) -- ;; -- sco*) -- case $cc_basename in -- CC) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -- ;; -- *) -- ;; -- esac -- ;; -- solaris*) -- case $cc_basename in -- CC) -- # Sun C++ 4.2, 5.x and Centerline C++ -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' -- ;; -- gcx) -- # Green Hills C++ Compiler -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' -- ;; -- *) -- ;; -- esac -- ;; -- sunos4*) -- case $cc_basename in -- CC) -- # Sun C++ 4.x -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- ;; -- lcc) -- # Lucid -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -- ;; -- *) -- ;; -- esac -- ;; -- tandem*) -- case $cc_basename in -- NCC) -- # NonStop-UX NCC 3.20 -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -- ;; -- *) -- ;; -- esac -- ;; -- unixware*) -- ;; -- vxworks*) -- ;; -- *) -- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no -- ;; -- esac -- fi --], --[ -- if test "$GCC" = yes; then -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' -+# _LT_DECL_SED -+# ------------ -+# Check for a fully-functional sed program, that truncates -+# as few characters as possible. Prefer GNU sed if found. -+m4_defun([_LT_DECL_SED], -+[AC_PROG_SED -+test -z "$SED" && SED=sed -+Xsed="$SED -e 1s/^X//" -+_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) -+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], -+ [Sed that helps us avoid accidentally triggering echo(1) options like -n]) -+])# _LT_DECL_SED -+ -+m4_ifndef([AC_PROG_SED], [ -+# NOTE: This macro has been submitted for inclusion into # -+# GNU Autoconf as AC_PROG_SED. When it is available in # -+# a released version of Autoconf we should remove this # -+# macro and use it instead. # - -- case $host_os in -- aix*) -- # All AIX code is PIC. -- if test "$host_cpu" = ia64; then -- # AIX 5 now supports IA64 processor -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+m4_defun([AC_PROG_SED], -+[AC_MSG_CHECKING([for a sed that does not truncate output]) -+AC_CACHE_VAL(lt_cv_path_SED, -+[# Loop through the user's path and test for sed and gsed. -+# Then use that list of sed's as ones to test for truncation. -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for lt_ac_prog in sed gsed; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then -+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi -- ;; -+ done -+ done -+done -+IFS=$as_save_IFS -+lt_ac_max=0 -+lt_ac_count=0 -+# Add /usr/xpg4/bin/sed as it is typically found on Solaris -+# along with /bin/sed that truncates output. -+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do -+ test ! -f $lt_ac_sed && continue -+ cat /dev/null > conftest.in -+ lt_ac_count=0 -+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in -+ # Check for GNU sed and select it if it is found. -+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then -+ lt_cv_path_SED=$lt_ac_sed -+ break -+ fi -+ while true; do -+ cat conftest.in conftest.in >conftest.tmp -+ mv conftest.tmp conftest.in -+ cp conftest.in conftest.nl -+ echo >>conftest.nl -+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break -+ cmp -s conftest.out conftest.nl || break -+ # 10000 chars as input seems more than enough -+ test $lt_ac_count -gt 10 && break -+ lt_ac_count=`expr $lt_ac_count + 1` -+ if test $lt_ac_count -gt $lt_ac_max; then -+ lt_ac_max=$lt_ac_count -+ lt_cv_path_SED=$lt_ac_sed -+ fi -+ done -+done -+]) -+SED=$lt_cv_path_SED -+AC_SUBST([SED]) -+AC_MSG_RESULT([$SED]) -+])#AC_PROG_SED -+])#m4_ifndef - -- amigaos*) -- # FIXME: we need at least 68020 code to build shared libraries, but -- # adding the `-m68020' flag to GCC prevents building anything better, -- # like `-m68040'. -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' -- ;; -+# Old name: -+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([LT_AC_PROG_SED], []) - -- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) -- # PIC is the default for these OSes. -- ;; - -- mingw* | pw32* | os2*) -- # This hack is so that the source file can tell whether it is being -- # built for inclusion in a dll (and should export symbols for example). -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' -- ;; -+# _LT_CHECK_SHELL_FEATURES -+# ------------------------ -+# Find out whether the shell is Bourne or XSI compatible, -+# or has some other useful features. -+m4_defun([_LT_CHECK_SHELL_FEATURES], -+[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) -+# Try some XSI features -+xsi_shell=no -+( _lt_dummy="a/b/c" -+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ -+ = c,a/b,, \ -+ && eval 'test $(( 1 + 1 )) -eq 2 \ -+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ -+ && xsi_shell=yes -+AC_MSG_RESULT([$xsi_shell]) -+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) -+ -+AC_MSG_CHECKING([whether the shell understands "+="]) -+lt_shell_append=no -+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ -+ >/dev/null 2>&1 \ -+ && lt_shell_append=yes -+AC_MSG_RESULT([$lt_shell_append]) -+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) - -- darwin* | rhapsody*) -- # PIC is the default on this platform -- # Common symbols not allowed in MH_DYLIB files -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' -- ;; -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ lt_unset=unset -+else -+ lt_unset=false -+fi -+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl - -- msdosdjgpp*) -- # Just because we use GCC doesn't mean we suddenly get shared libraries -- # on systems that don't support them. -- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no -- enable_shared=no -- ;; -+# test EBCDIC or ASCII -+case `echo X|tr X '\101'` in -+ A) # ASCII based system -+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr -+ lt_SP2NL='tr \040 \012' -+ lt_NL2SP='tr \015\012 \040\040' -+ ;; -+ *) # EBCDIC based system -+ lt_SP2NL='tr \100 \n' -+ lt_NL2SP='tr \r\n \100\100' -+ ;; -+esac -+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl -+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl -+])# _LT_CHECK_SHELL_FEATURES -+ -+ -+# _LT_PROG_XSI_SHELLFNS -+# --------------------- -+# Bourne and XSI compatible variants of some useful shell functions. -+m4_defun([_LT_PROG_XSI_SHELLFNS], -+[case $xsi_shell in -+ yes) -+ cat << \_LT_EOF >> "$cfgfile" -+ -+# func_dirname file append nondir_replacement -+# Compute the dirname of FILE. If nonempty, add APPEND to the result, -+# otherwise set result to NONDIR_REPLACEMENT. -+func_dirname () -+{ -+ case ${1} in -+ */*) func_dirname_result="${1%/*}${2}" ;; -+ * ) func_dirname_result="${3}" ;; -+ esac -+} - -- sysv4*MP*) -- if test -d /usr/nec; then -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic -- fi -- ;; -+# func_basename file -+func_basename () -+{ -+ func_basename_result="${1##*/}" -+} - -- hpux*) -- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -- # not for PA HP-UX. -- case "$host_cpu" in -- hppa*64*|ia64*) -- # +Z the default -- ;; -- *) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -- ;; -- esac -- ;; -+# func_dirname_and_basename file append nondir_replacement -+# perform func_basename and func_dirname in a single function -+# call: -+# dirname: Compute the dirname of FILE. If nonempty, -+# add APPEND to the result, otherwise set result -+# to NONDIR_REPLACEMENT. -+# value returned in "$func_dirname_result" -+# basename: Compute filename of FILE. -+# value retuned in "$func_basename_result" -+# Implementation must be kept synchronized with func_dirname -+# and func_basename. For efficiency, we do not delegate to -+# those functions but instead duplicate the functionality here. -+func_dirname_and_basename () -+{ -+ case ${1} in -+ */*) func_dirname_result="${1%/*}${2}" ;; -+ * ) func_dirname_result="${3}" ;; -+ esac -+ func_basename_result="${1##*/}" -+} - -- *) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -- ;; -- esac -- else -- # PORTME Check for flag to pass linker flags through the system compiler. -- case $host_os in -- aix*) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- if test "$host_cpu" = ia64; then -- # AIX 5 now supports IA64 processor -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- else -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' -- fi -- ;; -+# func_stripname prefix suffix name -+# strip PREFIX and SUFFIX off of NAME. -+# PREFIX and SUFFIX must not contain globbing or regex special -+# characters, hashes, percent signs, but SUFFIX may contain a leading -+# dot (in which case that matches only a dot). -+func_stripname () -+{ -+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are -+ # positional parameters, so assign one to ordinary parameter first. -+ func_stripname_result=${3} -+ func_stripname_result=${func_stripname_result#"${1}"} -+ func_stripname_result=${func_stripname_result%"${2}"} -+} - -- mingw* | pw32* | os2*) -- # This hack is so that the source file can tell whether it is being -- # built for inclusion in a dll (and should export symbols for example). -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' -- ;; -+# func_opt_split -+func_opt_split () -+{ -+ func_opt_split_opt=${1%%=*} -+ func_opt_split_arg=${1#*=} -+} - -- hpux9* | hpux10* | hpux11*) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -- # not for PA HP-UX. -- case "$host_cpu" in -- hppa*64*|ia64*) -- # +Z the default -- ;; -- *) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' -- ;; -- esac -- # Is there a better lt_prog_compiler_static that works with the bundled CC? -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' -- ;; -+# func_lo2o object -+func_lo2o () -+{ -+ case ${1} in -+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; -+ *) func_lo2o_result=${1} ;; -+ esac -+} - -- irix5* | irix6* | nonstopux*) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- # PIC (with -KPIC) is the default. -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -- ;; -+# func_xform libobj-or-source -+func_xform () -+{ -+ func_xform_result=${1%.*}.lo -+} - -- newsos6) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- ;; -+# func_arith arithmetic-term... -+func_arith () -+{ -+ func_arith_result=$(( $[*] )) -+} - -- linux*) -- case $CC in -- icc* | ecc*) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' -- ;; -- ccc*) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- # All Alpha code is PIC. -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -- ;; -- esac -- ;; -+# func_len string -+# STRING may not start with a hyphen. -+func_len () -+{ -+ func_len_result=${#1} -+} - -- osf3* | osf4* | osf5*) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- # All OSF/1 code is PIC. -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -- ;; -+_LT_EOF -+ ;; -+ *) # Bourne compatible functions. -+ cat << \_LT_EOF >> "$cfgfile" - -- sco3.2v5*) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' -- ;; -+# func_dirname file append nondir_replacement -+# Compute the dirname of FILE. If nonempty, add APPEND to the result, -+# otherwise set result to NONDIR_REPLACEMENT. -+func_dirname () -+{ -+ # Extract subdirectory from the argument. -+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` -+ if test "X$func_dirname_result" = "X${1}"; then -+ func_dirname_result="${3}" -+ else -+ func_dirname_result="$func_dirname_result${2}" -+ fi -+} - -- solaris*) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- ;; -+# func_basename file -+func_basename () -+{ -+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -+} - -- sunos4*) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- ;; -+dnl func_dirname_and_basename -+dnl A portable version of this function is already defined in general.m4sh -+dnl so there is no need for it here. -+ -+# func_stripname prefix suffix name -+# strip PREFIX and SUFFIX off of NAME. -+# PREFIX and SUFFIX must not contain globbing or regex special -+# characters, hashes, percent signs, but SUFFIX may contain a leading -+# dot (in which case that matches only a dot). -+# func_strip_suffix prefix name -+func_stripname () -+{ -+ case ${2} in -+ .*) func_stripname_result=`$ECHO "X${3}" \ -+ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; -+ *) func_stripname_result=`$ECHO "X${3}" \ -+ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; -+ esac -+} - -- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- ;; -+# sed scripts: -+my_sed_long_opt='1s/^$-[[^=]]*$=.*/\1/;q' -+my_sed_long_arg='1s/^-[[^=]]*=//' - -- sysv4*MP*) -- if test -d /usr/nec ;then -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- fi -- ;; -+# func_opt_split -+func_opt_split () -+{ -+ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` -+ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` -+} - -- uts4*) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -- ;; -+# func_lo2o object -+func_lo2o () -+{ -+ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` -+} - -- *) -- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no -- ;; -- esac -- fi --]) --AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) -+# func_xform libobj-or-source -+func_xform () -+{ -+ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` -+} - --# --# Check to make sure the PIC flag actually works. --# --if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then -- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], -- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), -- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], -- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in -- "" | " "*) ;; -- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; -- esac], -- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) --fi --case "$host_os" in -- # For platforms which do not support PIC, -DPIC is meaningless: -- *djgpp*) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -- ;; -- *) -- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" -- ;; --esac --]) -+# func_arith arithmetic-term... -+func_arith () -+{ -+ func_arith_result=`expr "$[@]"` -+} - -+# func_len string -+# STRING may not start with a hyphen. -+func_len () -+{ -+ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` -+} - --# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) --# ------------------------------------ --# See if the linker supports building shared libraries. --AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], --[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) --ifelse([$1],[CXX],[ -- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -- case $host_os in -- aix4* | aix5*) -- # If we're using GNU nm, then we don't want the "-C" option. -- # -C means demangle to AIX nm, but means don't demangle with GNU nm -- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then -- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' -- else -- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' -- fi -+_LT_EOF -+esac -+ -+case $lt_shell_append in -+ yes) -+ cat << \_LT_EOF >> "$cfgfile" -+ -+# func_append var value -+# Append VALUE to the end of shell variable VAR. -+func_append () -+{ -+ eval "$[1]+=\$[2]" -+} -+_LT_EOF - ;; -- pw32*) -- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" -- ;; -- cygwin* | mingw*) -- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* $[[^ ]]*$/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' -- ;; - *) -- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -- ;; -- esac --],[ -- runpath_var= -- _LT_AC_TAGVAR(allow_undefined_flag, $1)= -- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no -- _LT_AC_TAGVAR(archive_cmds, $1)= -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)= -- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= -- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= -- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -- _LT_AC_TAGVAR(hardcode_direct, $1)=no -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown -- _LT_AC_TAGVAR(hardcode_automatic, $1)=no -- _LT_AC_TAGVAR(module_cmds, $1)= -- _LT_AC_TAGVAR(module_expsym_cmds, $1)= -- _LT_AC_TAGVAR(always_export_symbols, $1)=no -- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -- # include_expsyms should be a list of space-separated symbols to be *always* -- # included in the symbol list -- _LT_AC_TAGVAR(include_expsyms, $1)= -- # exclude_expsyms can be an extended regexp of symbols to exclude -- # it will be wrapped by ` (' and `)$', so one must not match beginning or -- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -- # as well as any symbol that contains `d'. -- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" -- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -- # platforms (ab)use it in PIC code, but their linkers get confused if -- # the symbol is explicitly referenced. Since portable code cannot -- # rely on this symbol name, it's probably fine to never include it in -- # preloaded symbol tables. -- extract_expsyms_cmds= -+ cat << \_LT_EOF >> "$cfgfile" - -- case $host_os in -- cygwin* | mingw* | pw32*) -- # FIXME: the MSVC++ port hasn't been tested in a loooong time -- # When not using gcc, we currently assume that we are using -- # Microsoft Visual C++. -- if test "$GCC" != yes; then -- with_gnu_ld=no -- fi -- ;; -- openbsd*) -- with_gnu_ld=no -+# func_append var value -+# Append VALUE to the end of shell variable VAR. -+func_append () -+{ -+ eval "$[1]=\$$[1]\$[2]" -+} -+ -+_LT_EOF - ;; - esac -+]) - -- _LT_AC_TAGVAR(ld_shlibs, $1)=yes -- if test "$with_gnu_ld" = yes; then -- # If archive_cmds runs LD, not CC, wlarc should be empty -- wlarc='${wl}' -+# Helper functions for option handling. -*- Autoconf -*- -+# -+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -+# Written by Gary V. Vaughan, 2004 -+# -+# This file is free software; the Free Software Foundation gives -+# unlimited permission to copy and/or distribute it, with or without -+# modifications, as long as this notice is preserved. - -- # See if GNU ld supports shared libraries. -- case $host_os in -- aix3* | aix4* | aix5*) -- # On AIX/PPC, the GNU linker is very broken -- if test "$host_cpu" != ia64; then -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- cat <&2 -+# serial 6 ltoptions.m4 - --*** Warning: the GNU linker, at least up to release 2.9.1, is reported --*** to be unable to reliably create shared libraries on AIX. --*** Therefore, libtool is disabling shared libraries support. If you --*** really care for shared libraries, you may want to modify your PATH --*** so that a non-GNU linker is found, and then restart. -+# This is to help aclocal find these macros, as it can't see m4_define. -+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) - --EOF -- fi -- ;; - -- amigaos*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes -- -- # Samuel A. Falvo II reports -- # that the semantics of dynamic libraries on AmigaOS, at least up -- # to version 4, is to share data among multiple programs linked -- # with the same dynamic library. Since this doesn't match the -- # behavior of shared libraries on other platforms, we can't use -- # them. -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) -+# ------------------------------------------ -+m4_define([_LT_MANGLE_OPTION], -+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) - -- beos*) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported -- # Joseph Beckenbach says some releases of gcc -- # support --undefined. This deserves some investigation. FIXME -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- else -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; - -- cygwin* | mingw* | pw32*) -- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, -- # as there is no search path for DLLs. -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported -- _LT_AC_TAGVAR(always_export_symbols, $1)=no -- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* $[[^ ]]*$/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' -+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) -+# --------------------------------------- -+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a -+# matching handler defined, dispatch to it. Other OPTION-NAMEs are -+# saved as a flag. -+m4_define([_LT_SET_OPTION], -+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl -+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), -+ _LT_MANGLE_DEFUN([$1], [$2]), -+ [m4_warning([Unknown $1 option `$2'])])[]dnl -+]) - -- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- # If the export-symbols file already is a .def file (1st line -- # is EXPORTS), use it as is; otherwise, prepend... -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -- cp $export_symbols $output_objdir/$soname.def; -- else -- echo EXPORTS > $output_objdir/$soname.def; -- cat $export_symbols >> $output_objdir/$soname.def; -- fi~ -- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- else -- ld_shlibs=no -- fi -- ;; - -- netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' -- wlarc= -- else -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- fi -- ;; -+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) -+# ------------------------------------------------------------ -+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -+m4_define([_LT_IF_OPTION], -+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) - -- solaris* | sysv5*) -- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- cat <&2 - --*** Warning: The releases 2.8.* of the GNU linker cannot reliably --*** create shared libraries on Solaris systems. Therefore, libtool --*** is disabling shared libraries support. We urge you to upgrade GNU --*** binutils to release 2.9.1 or newer. Another option is to modify --*** your PATH or compiler configuration so that the native linker is --*** used, and then restart. -+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) -+# ------------------------------------------------------- -+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME -+# are set. -+m4_define([_LT_UNLESS_OPTIONS], -+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), -+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), -+ [m4_define([$0_found])])])[]dnl -+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 -+])[]dnl -+]) - --EOF -- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- else -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; - -- sunos4*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- wlarc= -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; -+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) -+# ---------------------------------------- -+# OPTION-LIST is a space-separated list of Libtool options associated -+# with MACRO-NAME. If any OPTION has a matching handler declared with -+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about -+# the unknown option and exit. -+m4_defun([_LT_SET_OPTIONS], -+[# Set options -+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), -+ [_LT_SET_OPTION([$1], _LT_Option)]) -+ -+m4_if([$1],[LT_INIT],[ -+ dnl -+ dnl Simply set some default values (i.e off) if boolean options were not -+ dnl specified: -+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no -+ ]) -+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no -+ ]) -+ dnl -+ dnl If no reference was made to various pairs of opposing options, then -+ dnl we run the default mode handler for the pair. For example, if neither -+ dnl `shared' nor `disable-shared' was passed, we enable building of shared -+ dnl archives by default: -+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) -+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) -+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) -+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], -+ [_LT_ENABLE_FAST_INSTALL]) -+ ]) -+])# _LT_SET_OPTIONS - -- linux*) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds" -- supports_anon_versioning=no -- case `$LD -v 2>/dev/null` in -- *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 -- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... -- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... -- *\ 2.11.*) ;; # other 2.11 versions -- *) supports_anon_versioning=yes ;; -- esac -- if test $supports_anon_versioning = yes; then -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ --cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ --$echo "local: *; };" >> $output_objdir/$libname.ver~ -- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' -- else -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds" -- fi -- else -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; - -- *) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- else -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; -- esac - -- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then -- runpath_var=LD_RUN_PATH -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -- # ancient GNU ld didn't support --whole-archive et. al. -- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -- else -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= -- fi -- fi -- else -- # PORTME fill in a description of your system's linker (not GNU ld) -- case $host_os in -- aix3*) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported -- _LT_AC_TAGVAR(always_export_symbols, $1)=yes -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' -- # Note: this linker hardcodes the directories in LIBPATH if there -- # are no directories specified by -L. -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes -- if test "$GCC" = yes && test -z "$link_static_flag"; then -- # Neither direct hardcoding nor static linking is supported with a -- # broken collect2. -- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported -- fi -- ;; -+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) -+# ----------------------------------------- -+m4_define([_LT_MANGLE_DEFUN], -+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) - -- aix4* | aix5*) -- if test "$host_cpu" = ia64; then -- # On IA64, the linker does run time linking by default, so we don't -- # have to do anything special. -- aix_use_runtimelinking=no -- exp_sym_flag='-Bexport' -- no_entry_flag="" -- else -- # If we're using GNU nm, then we don't want the "-C" option. -- # -C means demangle to AIX nm, but means don't demangle with GNU nm -- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then -- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' -- else -- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' -- fi -- aix_use_runtimelinking=no - -- # Test if we are trying to use run time linking or normal -- # AIX style linking. If -brtl is somewhere in LDFLAGS, we -- # need to do runtime linking. -- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) -- for ld_flag in $LDFLAGS; do -- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then -- aix_use_runtimelinking=yes -- break -- fi -- done -- esac -+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) -+# ----------------------------------------------- -+m4_define([LT_OPTION_DEFINE], -+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl -+])# LT_OPTION_DEFINE - -- exp_sym_flag='-bexport' -- no_entry_flag='-bnoentry' -- fi - -- # When large executables or shared objects are built, AIX ld can -- # have problems creating the table of contents. If linking a library -- # or program results in "error TOC overflow" add -mminimal-toc to -- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not -- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -+# dlopen -+# ------ -+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes -+]) - -- _LT_AC_TAGVAR(archive_cmds, $1)='' -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' -- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes -+AU_DEFUN([AC_LIBTOOL_DLOPEN], -+[_LT_SET_OPTION([LT_INIT], [dlopen]) -+AC_DIAGNOSE([obsolete], -+[$0: Remove this warning and the call to _LT_SET_OPTION when you -+put the `dlopen' option into LT_INIT's first parameter.]) -+]) - -- if test "$GCC" = yes; then -- case $host_os in aix4.[012]|aix4.[012].*) -- # We only want to do this on AIX 4.2 and lower, the check -- # below for broken collect2 doesn't work under 4.3+ -- collect2name=`${CC} -print-prog-name=collect2` -- if test -f "$collect2name" && \ -- strings "$collect2name" | grep resolve_lib_name >/dev/null -- then -- # We have reworked collect2 -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- else -- # We have old collect2 -- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported -- # It fails to find uninstalled libraries when the uninstalled -- # path is not listed in the libpath. Setting hardcode_minus_L -- # to unsupported forces relinking -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -- fi -- esac -- shared_flag='-shared' -- else -- # not using gcc -- if test "$host_cpu" = ia64; then -- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release -- # chokes on -Wl,-G. The following line is correct: -- shared_flag='-G' -- else -- if test "$aix_use_runtimelinking" = yes; then -- shared_flag='${wl}-G' -- else -- shared_flag='${wl}-bM:SRE' -- fi -- fi -- fi -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) - -- # It seems that -bexpall does not export symbols beginning with -- # underscore (_), so it is better to generate a list of symbols to export. -- _LT_AC_TAGVAR(always_export_symbols, $1)=yes -- if test "$aix_use_runtimelinking" = yes; then -- # Warning - without using the other runtime loading flags (-brtl), -- # -berok will link without error, but may produce a broken library. -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' -- # Determine the default libpath from the value encoded in an empty executable. -- _LT_AC_SYS_LIBPATH_AIX -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" -- else -- if test "$host_cpu" = ia64; then -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' -- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" -- else -- # Determine the default libpath from the value encoded in an empty executable. -- _LT_AC_SYS_LIBPATH_AIX -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -- # Warning - without using the other run time loading flags, -- # -berok will link without error, but may produce a broken library. -- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' -- # -bexpall does not export symbols beginning with underscore (_) -- _LT_AC_TAGVAR(always_export_symbols, $1)=yes -- # Exported symbols can be pulled into shared objects from archives -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes -- # This is similar to how AIX traditionally builds it's shared libraries. -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -- fi -- fi -- ;; - -- amigaos*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes -- # see comment about different semantics on the GNU ld section -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -+# win32-dll -+# --------- -+# Declare package support for building win32 dll's. -+LT_OPTION_DEFINE([LT_INIT], [win32-dll], -+[enable_win32_dll=yes - -- bsdi4*) -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic -- ;; -+case $host in -+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) -+ AC_CHECK_TOOL(AS, as, false) -+ AC_CHECK_TOOL(DLLTOOL, dlltool, false) -+ AC_CHECK_TOOL(OBJDUMP, objdump, false) -+ ;; -+esac - -- cygwin* | mingw* | pw32*) -- # When not using gcc, we currently assume that we are using -- # Microsoft Visual C++. -- # hardcode_libdir_flag_spec is actually meaningless, as there is -- # no search path for DLLs. -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported -- # Tell ltmain to make .lib files, not .a files. -- libext=lib -- # Tell ltmain to make .dll files, not .so files. -- shrext_cmds=".dll" -- # FIXME: Setting linknames here is a bad hack. -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' -- # The linker will automatically build a .lib file if we build a DLL. -- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' -- # FIXME: Should let the user specify the lib program. -- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' -- fix_srcfile_path='`cygpath -w "$srcfile"`' -- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -- ;; -+test -z "$AS" && AS=as -+_LT_DECL([], [AS], [0], [Assembler program])dnl - -- darwin* | rhapsody*) -- if test "$GXX" = yes ; then -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -- case "$host_os" in -- rhapsody* | darwin1.[[012]]) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' -- ;; -- *) # Darwin 1.3 on -- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' -- else -- case ${MACOSX_DEPLOYMENT_TARGET} in -- 10.[[012]]) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' -- ;; -- 10.*) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' -- ;; -- esac -- fi -- ;; -- esac -- lt_int_apple_cc_single_mod=no -- output_verbose_link_cmd='echo' -- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then -- lt_int_apple_cc_single_mod=yes -- fi -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' -- else -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' -- fi -- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' -- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- else -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- fi -- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- _LT_AC_TAGVAR(hardcode_direct, $1)=no -- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' -- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes -- else -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- fi -- ;; -+test -z "$DLLTOOL" && DLLTOOL=dlltool -+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl - -- dgux*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; -+test -z "$OBJDUMP" && OBJDUMP=objdump -+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl -+])# win32-dll - -- freebsd1*) -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -+AU_DEFUN([AC_LIBTOOL_WIN32_DLL], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+_LT_SET_OPTION([LT_INIT], [win32-dll]) -+AC_DIAGNOSE([obsolete], -+[$0: Remove this warning and the call to _LT_SET_OPTION when you -+put the `win32-dll' option into LT_INIT's first parameter.]) -+]) - -- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor -- # support. Future versions do this automatically, but an explicit c++rt0.o -- # does not break anything, and helps significantly (at the cost of a little -- # extra space). -- freebsd2.2*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) - -- # Unfortunately, older versions of FreeBSD 2 do not have this feature. -- freebsd2*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; - -- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. -- freebsd* | kfreebsd*-gnu) -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -+# _LT_ENABLE_SHARED([DEFAULT]) -+# ---------------------------- -+# implement the --enable-shared flag, and supports the `shared' and -+# `disable-shared' LT_INIT options. -+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -+m4_define([_LT_ENABLE_SHARED], -+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl -+AC_ARG_ENABLE([shared], -+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], -+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], -+ [p=${PACKAGE-default} -+ case $enableval in -+ yes) enable_shared=yes ;; -+ no) enable_shared=no ;; -+ *) -+ enable_shared=no -+ # Look at the argument we got. We use all the common list separators. -+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -+ for pkg in $enableval; do -+ IFS="$lt_save_ifs" -+ if test "X$pkg" = "X$p"; then -+ enable_shared=yes -+ fi -+ done -+ IFS="$lt_save_ifs" - ;; -+ esac], -+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) - -- hpux9*) -- if test "$GCC" = yes; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -- else -- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -- fi -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -+ _LT_DECL([build_libtool_libs], [enable_shared], [0], -+ [Whether or not to build shared libraries]) -+])# _LT_ENABLE_SHARED - -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -- ;; -+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) -+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) - -- hpux10* | hpux11*) -- if test "$GCC" = yes -a "$with_gnu_ld" = no; then -- case "$host_cpu" in -- hppa*64*|ia64*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- ;; -- *) -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -- ;; -- esac -- else -- case "$host_cpu" in -- hppa*64*|ia64*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' -- ;; -- *) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -- ;; -- esac -- fi -- if test "$with_gnu_ld" = no; then -- case "$host_cpu" in -- hppa*64*) -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- _LT_AC_TAGVAR(hardcode_direct, $1)=no -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; -- ia64*) -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_AC_TAGVAR(hardcode_direct, $1)=no -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -+# Old names: -+AC_DEFUN([AC_ENABLE_SHARED], -+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) -+]) - -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes -- ;; -- *) -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+AC_DEFUN([AC_DISABLE_SHARED], -+[_LT_SET_OPTION([LT_INIT], [disable-shared]) -+]) - -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes -- ;; -- esac -- fi -- ;; -+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) - -- irix5* | irix6* | nonstopux*) -- if test "$GCC" = yes; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- else -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' -- fi -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AM_ENABLE_SHARED], []) -+dnl AC_DEFUN([AM_DISABLE_SHARED], []) -+ -+ -+ -+# _LT_ENABLE_STATIC([DEFAULT]) -+# ---------------------------- -+# implement the --enable-static flag, and support the `static' and -+# `disable-static' LT_INIT options. -+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -+m4_define([_LT_ENABLE_STATIC], -+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl -+AC_ARG_ENABLE([static], -+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], -+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], -+ [p=${PACKAGE-default} -+ case $enableval in -+ yes) enable_static=yes ;; -+ no) enable_static=no ;; -+ *) -+ enable_static=no -+ # Look at the argument we got. We use all the common list separators. -+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -+ for pkg in $enableval; do -+ IFS="$lt_save_ifs" -+ if test "X$pkg" = "X$p"; then -+ enable_static=yes -+ fi -+ done -+ IFS="$lt_save_ifs" - ;; -+ esac], -+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT) - -- netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out -- else -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF -- fi -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; -+ _LT_DECL([build_old_libs], [enable_static], [0], -+ [Whether or not to build static libraries]) -+])# _LT_ENABLE_STATIC - -- newsos6) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; -+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) -+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) - -- openbsd*) -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -- else -- case $host_os in -- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -- ;; -- *) -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -- ;; -- esac -- fi -- ;; -+# Old names: -+AC_DEFUN([AC_ENABLE_STATIC], -+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) -+]) - -- os2*) -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported -- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' -- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' -- ;; -+AC_DEFUN([AC_DISABLE_STATIC], -+[_LT_SET_OPTION([LT_INIT], [disable-static]) -+]) - -- osf3*) -- if test "$GCC" = yes; then -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- else -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- fi -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- ;; -+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) - -- osf4* | osf5*) # as osf3* with the addition of -msym flag -- if test "$GCC" = yes; then -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -- else -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ -- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AM_ENABLE_STATIC], []) -+dnl AC_DEFUN([AM_DISABLE_STATIC], []) - -- # Both c and cxx compiler support -rpath directly -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' -- fi -- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: -- ;; - -- sco3.2v5*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' -- runpath_var=LD_RUN_PATH -- hardcode_runpath_var=yes -- ;; - -- solaris*) -- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' -- if test "$GCC" = yes; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' -- else -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' -- fi -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- case $host_os in -- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; -- *) # Supported since Solaris 2.6 (maybe 2.5.1?) -- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; -- esac -- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes -+# _LT_ENABLE_FAST_INSTALL([DEFAULT]) -+# ---------------------------------- -+# implement the --enable-fast-install flag, and support the `fast-install' -+# and `disable-fast-install' LT_INIT options. -+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -+m4_define([_LT_ENABLE_FAST_INSTALL], -+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl -+AC_ARG_ENABLE([fast-install], -+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], -+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], -+ [p=${PACKAGE-default} -+ case $enableval in -+ yes) enable_fast_install=yes ;; -+ no) enable_fast_install=no ;; -+ *) -+ enable_fast_install=no -+ # Look at the argument we got. We use all the common list separators. -+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -+ for pkg in $enableval; do -+ IFS="$lt_save_ifs" -+ if test "X$pkg" = "X$p"; then -+ enable_fast_install=yes -+ fi -+ done -+ IFS="$lt_save_ifs" - ;; -+ esac], -+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) - -- sunos4*) -- if test "x$host_vendor" = xsequent; then -- # Use $CC to link under sequent, because it throws in some extra .o -- # files that make .init and .fini sections work. -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' -- else -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' -- fi -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; -+_LT_DECL([fast_install], [enable_fast_install], [0], -+ [Whether or not to optimize for fast installation])dnl -+])# _LT_ENABLE_FAST_INSTALL -+ -+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) -+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) -+ -+# Old names: -+AU_DEFUN([AC_ENABLE_FAST_INSTALL], -+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -+AC_DIAGNOSE([obsolete], -+[$0: Remove this warning and the call to _LT_SET_OPTION when you put -+the `fast-install' option into LT_INIT's first parameter.]) -+]) - -- sysv4) -- case $host_vendor in -- sni) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? -- ;; -- siemens) -- ## LD is ld it makes a PLAMLIB -- ## CC just makes a GrossModule. -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' -- _LT_AC_TAGVAR(hardcode_direct, $1)=no -- ;; -- motorola) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie -- ;; -- esac -- runpath_var='LD_RUN_PATH' -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; -+AU_DEFUN([AC_DISABLE_FAST_INSTALL], -+[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -+AC_DIAGNOSE([obsolete], -+[$0: Remove this warning and the call to _LT_SET_OPTION when you put -+the `disable-fast-install' option into LT_INIT's first parameter.]) -+]) - -- sysv4.3*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' -- ;; -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) -+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) - -- sysv4*MP*) -- if test -d /usr/nec; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- runpath_var=LD_RUN_PATH -- hardcode_runpath_var=yes -- _LT_AC_TAGVAR(ld_shlibs, $1)=yes -- fi -- ;; - -- sysv4.2uw2*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(hardcode_direct, $1)=yes -- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- hardcode_runpath_var=yes -- runpath_var=LD_RUN_PATH -- ;; -+# _LT_WITH_PIC([MODE]) -+# -------------------- -+# implement the --with-pic flag, and support the `pic-only' and `no-pic' -+# LT_INIT options. -+# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -+m4_define([_LT_WITH_PIC], -+[AC_ARG_WITH([pic], -+ [AS_HELP_STRING([--with-pic], -+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], -+ [pic_mode="$withval"], -+ [pic_mode=default]) - -- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) -- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' -- if test "$GCC" = yes; then -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- else -- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- fi -- runpath_var='LD_RUN_PATH' -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; -+test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) - -- sysv5*) -- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' -- # $CC -shared without GNU ld will not create a library from C++ -- # object files and a static libstdc++, better avoid it by now -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- runpath_var='LD_RUN_PATH' -- ;; -+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl -+])# _LT_WITH_PIC - -- uts4*) -- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no -- ;; -+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) -+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) - -- *) -- _LT_AC_TAGVAR(ld_shlibs, $1)=no -- ;; -- esac -- fi -+# Old name: -+AU_DEFUN([AC_LIBTOOL_PICMODE], -+[_LT_SET_OPTION([LT_INIT], [pic-only]) -+AC_DIAGNOSE([obsolete], -+[$0: Remove this warning and the call to _LT_SET_OPTION when you -+put the `pic-only' option into LT_INIT's first parameter.]) - ]) --AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) --test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - --variables_saved_for_relink="PATH $shlibpath_var $runpath_var" --if test "$GCC" = yes; then -- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" --fi -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) - -+ -+m4_define([_LTDL_MODE], []) -+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], -+ [m4_define([_LTDL_MODE], [nonrecursive])]) -+LT_OPTION_DEFINE([LTDL_INIT], [recursive], -+ [m4_define([_LTDL_MODE], [recursive])]) -+LT_OPTION_DEFINE([LTDL_INIT], [subproject], -+ [m4_define([_LTDL_MODE], [subproject])]) -+ -+m4_define([_LTDL_TYPE], []) -+LT_OPTION_DEFINE([LTDL_INIT], [installable], -+ [m4_define([_LTDL_TYPE], [installable])]) -+LT_OPTION_DEFINE([LTDL_INIT], [convenience], -+ [m4_define([_LTDL_TYPE], [convenience])]) -+ -+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- - # --# Do we need to explicitly link libc? -+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -+# Written by Gary V. Vaughan, 2004 - # --case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in --x|xyes) -- # Assume -lc should be added -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes -+# This file is free software; the Free Software Foundation gives -+# unlimited permission to copy and/or distribute it, with or without -+# modifications, as long as this notice is preserved. - -- if test "$enable_shared" = yes && test "$GCC" = yes; then -- case $_LT_AC_TAGVAR(archive_cmds, $1) in -- *'~'*) -- # FIXME: we may have to deal with multi-command sequences. -- ;; -- '$CC '*) -- # Test whether the compiler implicitly links with -lc since on some -- # systems, -lgcc has to come before -lc. If gcc already passes -lc -- # to ld, don't add -lc before -lgcc. -- AC_MSG_CHECKING([whether -lc should be explicitly linked in]) -- $rm conftest* -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -+# serial 6 ltsugar.m4 - -- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then -- soname=conftest -- lib=conftest -- libobjs=conftest.$ac_objext -- deplibs= -- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) -- compiler_flags=-v -- linker_flags=-v -- verstring= -- output_objdir=. -- libname=conftest -- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) -- _LT_AC_TAGVAR(allow_undefined_flag, $1)= -- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) -- then -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -- else -- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes -- fi -- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag -- else -- cat conftest.err 1>&5 -- fi -- $rm conftest* -- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) -- ;; -- esac -- fi -- ;; --esac --])# AC_LIBTOOL_PROG_LD_SHLIBS -+# This is to help aclocal find these macros, as it can't see m4_define. -+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) - - --# _LT_AC_FILE_LTDLL_C --# ------------------- --# Be careful that the start marker always follows a newline. --AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ --# /* ltdll.c starts here */ --# #define WIN32_LEAN_AND_MEAN --# #include --# #undef WIN32_LEAN_AND_MEAN --# #include --# --# #ifndef __CYGWIN__ --# # ifdef __CYGWIN32__ --# # define __CYGWIN__ __CYGWIN32__ --# # endif --# #endif --# --# #ifdef __cplusplus --# extern "C" { --# #endif --# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); --# #ifdef __cplusplus --# } --# #endif --# --# #ifdef __CYGWIN__ --# #include --# DECLARE_CYGWIN_DLL( DllMain ); --# #endif --# HINSTANCE __hDllInstance_base; --# --# BOOL APIENTRY --# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) --# { --# __hDllInstance_base = hInst; --# return TRUE; --# } --# /* ltdll.c ends here */ --])# _LT_AC_FILE_LTDLL_C -+# lt_join(SEP, ARG1, [ARG2...]) -+# ----------------------------- -+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their -+# associated separator. -+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier -+# versions in m4sugar had bugs. -+m4_define([lt_join], -+[m4_if([$#], [1], [], -+ [$#], [2], [[$2]], -+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) -+m4_define([_lt_join], -+[m4_if([$#$2], [2], [], -+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) - - --# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) --# --------------------------------- --AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) -+# lt_car(LIST) -+# lt_cdr(LIST) -+# ------------ -+# Manipulate m4 lists. -+# These macros are necessary as long as will still need to support -+# Autoconf-2.59 which quotes differently. -+m4_define([lt_car], [[$1]]) -+m4_define([lt_cdr], -+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], -+ [$#], 1, [], -+ [m4_dquote(m4_shift($@))])]) -+m4_define([lt_unquote], $1) -+ -+ -+# lt_append(MACRO-NAME, STRING, [SEPARATOR]) -+# ------------------------------------------ -+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. -+# Note that neither SEPARATOR nor STRING are expanded; they are appended -+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). -+# No SEPARATOR is output if MACRO-NAME was previously undefined (different -+# than defined and empty). -+# -+# This macro is needed until we can rely on Autoconf 2.62, since earlier -+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. -+m4_define([lt_append], -+[m4_define([$1], -+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) - - --# old names --AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) --AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) --AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) --AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) --AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) --AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) --AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) - --# This is just to silence aclocal about the macro not being used --ifelse([AC_DISABLE_FAST_INSTALL]) -+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) -+# ---------------------------------------------------------- -+# Produce a SEP delimited list of all paired combinations of elements of -+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list -+# has the form PREFIXmINFIXSUFFIXn. -+# Needed until we can rely on m4_combine added in Autoconf 2.62. -+m4_define([lt_combine], -+[m4_if(m4_eval([$# > 3]), [1], -+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl -+[[m4_foreach([_Lt_prefix], [$2], -+ [m4_foreach([_Lt_suffix], -+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, -+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) -+ -+ -+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) -+# ----------------------------------------------------------------------- -+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited -+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. -+m4_define([lt_if_append_uniq], -+[m4_ifdef([$1], -+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], -+ [lt_append([$1], [$2], [$3])$4], -+ [$5])], -+ [lt_append([$1], [$2], [$3])$4])]) - --AC_DEFUN([LT_AC_PROG_GCJ], --[AC_CHECK_TOOL(GCJ, gcj, no) -- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" -- AC_SUBST(GCJFLAGS) --]) - --AC_DEFUN([LT_AC_PROG_RC], --[AC_CHECK_TOOL(RC, windres, no) --]) -+# lt_dict_add(DICT, KEY, VALUE) -+# ----------------------------- -+m4_define([lt_dict_add], -+[m4_define([$1($2)], [$3])]) - --# NOTE: This macro has been submitted for inclusion into # --# GNU Autoconf as AC_PROG_SED. When it is available in # --# a released version of Autoconf we should remove this # --# macro and use it instead. # --# LT_AC_PROG_SED --# -------------- --# Check for a fully-functional sed program, that truncates --# as few characters as possible. Prefer GNU sed if found. --AC_DEFUN([LT_AC_PROG_SED], --[AC_MSG_CHECKING([for a sed that does not truncate output]) --AC_CACHE_VAL(lt_cv_path_SED, --[# Loop through the user's path and test for sed and gsed. --# Then use that list of sed's as ones to test for truncation. --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for lt_ac_prog in sed gsed; do -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then -- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" -- fi -- done -- done --done --lt_ac_max=0 --lt_ac_count=0 --# Add /usr/xpg4/bin/sed as it is typically found on Solaris --# along with /bin/sed that truncates output. --for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do -- test ! -f $lt_ac_sed && break -- cat /dev/null > conftest.in -- lt_ac_count=0 -- echo $ECHO_N "0123456789$ECHO_C" >conftest.in -- # Check for GNU sed and select it if it is found. -- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then -- lt_cv_path_SED=$lt_ac_sed -- break -- fi -- while true; do -- cat conftest.in conftest.in >conftest.tmp -- mv conftest.tmp conftest.in -- cp conftest.in conftest.nl -- echo >>conftest.nl -- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break -- cmp -s conftest.out conftest.nl || break -- # 10000 chars as input seems more than enough -- test $lt_ac_count -gt 10 && break -- lt_ac_count=`expr $lt_ac_count + 1` -- if test $lt_ac_count -gt $lt_ac_max; then -- lt_ac_max=$lt_ac_count -- lt_cv_path_SED=$lt_ac_sed -- fi -- done --done --SED=$lt_cv_path_SED -+ -+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) -+# -------------------------------------------- -+m4_define([lt_dict_add_subkey], -+[m4_define([$1($2:$3)], [$4])]) -+ -+ -+# lt_dict_fetch(DICT, KEY, [SUBKEY]) -+# ---------------------------------- -+m4_define([lt_dict_fetch], -+[m4_ifval([$3], -+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), -+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) -+ -+ -+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) -+# ----------------------------------------------------------------- -+m4_define([lt_if_dict_fetch], -+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], -+ [$5], -+ [$6])]) -+ -+ -+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) -+# -------------------------------------------------------------- -+m4_define([lt_dict_filter], -+[m4_if([$5], [], [], -+ [lt_join(m4_quote(m4_default([$4], [[, ]])), -+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), -+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl - ]) --AC_MSG_RESULT([$SED]) -+ -+# ltversion.m4 -- version numbers -*- Autoconf -*- -+# -+# Copyright (C) 2004 Free Software Foundation, Inc. -+# Written by Scott James Remnant, 2004 -+# -+# This file is free software; the Free Software Foundation gives -+# unlimited permission to copy and/or distribute it, with or without -+# modifications, as long as this notice is preserved. -+ -+# Generated from ltversion.in. -+ -+# serial 3017 ltversion.m4 -+# This file is part of GNU Libtool -+ -+m4_define([LT_PACKAGE_VERSION], [2.2.6b]) -+m4_define([LT_PACKAGE_REVISION], [1.3017]) -+ -+AC_DEFUN([LTVERSION_VERSION], -+[macro_version='2.2.6b' -+macro_revision='1.3017' -+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) -+_LT_DECL(, macro_revision, 0) - ]) - --# -*- Autoconf -*- --# Copyright (C) 2002, 2003 Free Software Foundation, Inc. --# Generated from amversion.in; do not edit by hand. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -+# -+# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. -+# Written by Scott James Remnant, 2004. -+# -+# This file is free software; the Free Software Foundation gives -+# unlimited permission to copy and/or distribute it, with or without -+# modifications, as long as this notice is preserved. - --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -+# serial 4 lt~obsolete.m4 - --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -+# These exist entirely to fool aclocal when bootstrapping libtool. -+# -+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) -+# which have later been changed to m4_define as they aren't part of the -+# exported API, or moved to Autoconf or Automake where they belong. -+# -+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -+# using a macro with the same name in our local m4/libtool.m4 it'll -+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -+# and doesn't know about Autoconf macros at all.) -+# -+# So we provide this file, which has a silly filename so it's always -+# included after everything else. This provides aclocal with the -+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -+# because those macros already exist, or will be overwritten later. -+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. -+# -+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -+# Yes, that means every name once taken will need to remain here until -+# we give up compatibility with versions before 1.7, at which point -+# we need to keep only those names which we still refer to. -+ -+# This is to help aclocal find these macros, as it can't see m4_define. -+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) -+ -+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) -+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) -+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) -+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) -+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) -+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) -+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) -+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) -+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) -+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) -+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) -+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) -+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) -+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) -+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) -+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) -+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) -+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) -+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) -+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) -+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) -+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) -+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) -+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) -+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) -+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) -+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) -+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) -+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) -+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) -+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) -+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) -+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) -+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) -+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) -+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) -+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) -+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) -+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) -+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) -+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) -+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) -+m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) -+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) -+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) -+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) -+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) -+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) -+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) -+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) -+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) -+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) -+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) -+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) -+ -+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - - # AM_AUTOMAKE_VERSION(VERSION) - # ---------------------------- - # Automake X.Y traces this macro to ensure aclocal.m4 has been - # generated from the m4 files accompanying Automake X.Y. --AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) -+# (This private macro should not be called outside this file.) -+AC_DEFUN([AM_AUTOMAKE_VERSION], -+[am__api_version='1.11' -+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -+dnl require some minimum version. Point them to the right macro. -+m4_if([$1], [1.11.1], [], -+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -+]) -+ -+# _AM_AUTOCONF_VERSION(VERSION) -+# ----------------------------- -+# aclocal traces this macro to find the Autoconf version. -+# This is a private macro too. Using m4_define simplifies -+# the logic in aclocal, which can simply ignore this definition. -+m4_define([_AM_AUTOCONF_VERSION], []) - - # AM_SET_CURRENT_AUTOMAKE_VERSION - # ------------------------------- --# Call AM_AUTOMAKE_VERSION so it can be traced. --# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. --AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -- [AM_AUTOMAKE_VERSION([1.9.2])]) -- --# AM_AUX_DIR_EXPAND -- --# Copyright (C) 2001, 2003 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -+[AM_AUTOMAKE_VERSION([1.11.1])dnl -+m4_ifndef([AC_AUTOCONF_VERSION], -+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -+# AM_AUX_DIR_EXPAND -*- Autoconf -*- - --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - - # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets - # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -@@ -6031,26 +8074,16 @@ AC_PREREQ([2.50])dnl - am_aux_dir=`cd $ac_aux_dir && pwd` - ]) - --# AM_CONDITIONAL -*- Autoconf -*- -- --# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -+# AM_CONDITIONAL -*- Autoconf -*- - --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# serial 6 -+# serial 9 - - # AM_CONDITIONAL(NAME, SHELL-CONDITION) - # ------------------------------------- -@@ -6059,8 +8092,11 @@ AC_DEFUN([AM_CONDITIONAL], - [AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl --AC_SUBST([$1_TRUE]) --AC_SUBST([$1_FALSE]) -+AC_SUBST([$1_TRUE])dnl -+AC_SUBST([$1_FALSE])dnl -+_AM_SUBST_NOTMAKE([$1_TRUE])dnl -+_AM_SUBST_NOTMAKE([$1_FALSE])dnl -+m4_define([_AM_COND_VALUE_$1], [$2])dnl - if $2; then - $1_TRUE= - $1_FALSE='#' -@@ -6074,26 +8110,14 @@ AC_CONFIG_COMMANDS_PRE( - Usually this means the macro was only invoked conditionally.]]) - fi])]) - --# serial 7 -*- Autoconf -*- -- --# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 -+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 - # Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -- -+# serial 10 - - # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be - # written in clear, in which case automake, when reading aclocal.m4, -@@ -6102,7 +8126,6 @@ fi])]) - # CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -- - # _AM_DEPENDENCIES(NAME) - # ---------------------- - # See how the compiler implements dependency checking. -@@ -6122,6 +8145,7 @@ AC_REQUIRE([AM_DEP_TRACK])dnl - ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], -+ [$1], UPC, [depcc="$UPC" am_compiler_list=], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -@@ -6150,6 +8174,16 @@ AC_CACHE_CHECK([dependency style of $dep - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*$[a-zA-Z0-9]*$)$/\1/p'] < ./depcomp` - fi -+ am__universal=false -+ m4_case([$1], [CC], -+ [case " $depcc " in #( -+ *\ -arch\ *\ -arch\ *) am__universal=true ;; -+ esac], -+ [CXX], -+ [case " $depcc " in #( -+ *\ -arch\ *\ -arch\ *) am__universal=true ;; -+ esac]) -+ - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and -@@ -6167,7 +8201,17 @@ AC_CACHE_CHECK([dependency style of $dep - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - -+ # We check with `-c' and `-o' for the sake of the "dashmstdout" -+ # mode. It turns out that the SunPro C++ compiler does not properly -+ # handle `-M -o', and we need to detect this. Also, some Intel -+ # versions had trouble with output in subdirs -+ am__obj=sub/conftest.${OBJEXT-o} -+ am__minus_obj="-o $am__obj" - case $depmode in -+ gcc) -+ # This depmode causes a compiler race in universal mode. -+ test "$am__universal" = false || continue -+ ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested -@@ -6177,18 +8221,23 @@ AC_CACHE_CHECK([dependency style of $dep - break - fi - ;; -+ msvisualcpp | msvcmsys) -+ # This compiler won't grok `-c -o', but also, the minuso test has -+ # not run yet. These depmodes are late enough in the game, and -+ # so weak that their functioning should not be impacted. -+ am__obj=conftest.${OBJEXT-o} -+ am__minus_obj= -+ ;; - none) break ;; - esac -- # We check with `-c' and `-o' for the sake of the "dashmstdout" -- # mode. It turns out that the SunPro C++ compiler does not properly -- # handle `-M -o', and we need to detect this. - if depmode=$depmode \ -- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ -+ source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ -- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ -+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && -+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && -- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && -+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message -@@ -6239,72 +8288,74 @@ if test "x$enable_dependency_tracking" ! - AMDEPBACKSLASH='\' - fi - AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) --AC_SUBST([AMDEPBACKSLASH]) -+AC_SUBST([AMDEPBACKSLASH])dnl -+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl - ]) - --# Generate code to set up dependency tracking. -*- Autoconf -*- -- --# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 --# Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -+# Generate code to set up dependency tracking. -*- Autoconf -*- - --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --#serial 2 -+#serial 5 - - # _AM_OUTPUT_DEPENDENCY_COMMANDS - # ------------------------------ - AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], --[for mf in $CONFIG_FILES; do -- # Strip MF so we end up with the name of the file. -- mf=`echo "$mf" | sed -e 's/:.*$//'` -- # Check whether this is an Automake generated Makefile or not. -- # We used to match only the files named `Makefile.in', but -- # some people rename them; so instead we look at the file content. -- # Grep'ing the first line is not enough: some people post-process -- # each Makefile.in and add a new line on top of each file to say so. -- # So let's grep whole file. -- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then -- dirpart=`AS_DIRNAME("$mf")` -- else -- continue -- fi -- # Extract the definition of DEPDIR, am__include, and am__quote -- # from the Makefile without running `make'. -- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` -- test -z "$DEPDIR" && continue -- am__include=`sed -n 's/^am__include = //p' < "$mf"` -- test -z "am__include" && continue -- am__quote=`sed -n 's/^am__quote = //p' < "$mf"` -- # When using ansi2knr, U may be empty or an underscore; expand it -- U=`sed -n 's/^U = //p' < "$mf"` -- # Find all dependency output files, they are included files with -- # $(DEPDIR) in their names. We invoke sed twice because it is the -- # simplest approach to changing $(DEPDIR) to its actual value in the -- # expansion. -- for file in `sed -n " -- s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \ -- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do -- # Make sure the directory exists. -- test -f "$dirpart/$file" && continue -- fdir=`AS_DIRNAME(["$file"])` -- AS_MKDIR_P([$dirpart/$fdir]) -- # echo "creating $dirpart/$file" -- echo '# dummy' > "$dirpart/$file" -+[{ -+ # Autoconf 2.62 quotes --file arguments for eval, but not when files -+ # are listed without --file. Let's play safe and only enable the eval -+ # if we detect the quoting. -+ case $CONFIG_FILES in -+ *\'*) eval set x "$CONFIG_FILES" ;; -+ *) set x $CONFIG_FILES ;; -+ esac -+ shift -+ for mf -+ do -+ # Strip MF so we end up with the name of the file. -+ mf=`echo "$mf" | sed -e 's/:.*$//'` -+ # Check whether this is an Automake generated Makefile or not. -+ # We used to match only the files named `Makefile.in', but -+ # some people rename them; so instead we look at the file content. -+ # Grep'ing the first line is not enough: some people post-process -+ # each Makefile.in and add a new line on top of each file to say so. -+ # Grep'ing the whole file is not good either: AIX grep has a line -+ # limit of 2048, but all sed's we know have understand at least 4000. -+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then -+ dirpart=`AS_DIRNAME("$mf")` -+ else -+ continue -+ fi -+ # Extract the definition of DEPDIR, am__include, and am__quote -+ # from the Makefile without running `make'. -+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` -+ test -z "$DEPDIR" && continue -+ am__include=`sed -n 's/^am__include = //p' < "$mf"` -+ test -z "am__include" && continue -+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` -+ # When using ansi2knr, U may be empty or an underscore; expand it -+ U=`sed -n 's/^U = //p' < "$mf"` -+ # Find all dependency output files, they are included files with -+ # $(DEPDIR) in their names. We invoke sed twice because it is the -+ # simplest approach to changing $(DEPDIR) to its actual value in the -+ # expansion. -+ for file in `sed -n " -+ s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \ -+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do -+ # Make sure the directory exists. -+ test -f "$dirpart/$file" && continue -+ fdir=`AS_DIRNAME(["$file"])` -+ AS_MKDIR_P([$dirpart/$fdir]) -+ # echo "creating $dirpart/$file" -+ echo '# dummy' > "$dirpart/$file" -+ done - done --done -+} - ])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -@@ -6321,55 +8372,20 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) - ]) - --# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- -- --# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -+# Do all the work for Automake. -*- Autoconf -*- - --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -- --# serial 7 -- --# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. --AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# Do all the work for Automake. -*- Autoconf -*- -+# serial 16 - --# This macro actually does too much some checks are only needed if -+# This macro actually does too much. Some checks are only needed if - # your package does certain things. But this isn't really a big deal. - --# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 --# Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -- --# serial 11 -- - # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) - # AM_INIT_AUTOMAKE([OPTIONS]) - # ----------------------------------------------- -@@ -6382,16 +8398,20 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_ - # arguments mandatory, and then we can depend on a new Autoconf - # release and drop the old call support. - AC_DEFUN([AM_INIT_AUTOMAKE], --[AC_PREREQ([2.58])dnl -+[AC_PREREQ([2.62])dnl - dnl Autoconf wants to disallow AM_ names. We explicitly allow - dnl the ones we care about. - m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl - AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl --# test to see if srcdir already configured --if test "`cd $srcdir && pwd`" != "`pwd`" && -- test -f $srcdir/config.status; then -- AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -+if test "`cd $srcdir && pwd`" != "`pwd`"; then -+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output -+ # is not polluted with repeated "-I." -+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl -+ # test to see if srcdir already configured -+ if test -f $srcdir/config.status; then -+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -+ fi - fi - - # test whether we have cygpath -@@ -6411,6 +8431,9 @@ m4_ifval([$2], - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], - [_AM_SET_OPTIONS([$1])dnl -+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, -+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -@@ -6426,8 +8449,8 @@ AM_MISSING_PROG(AUTOCONF, autoconf) - AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) - AM_MISSING_PROG(AUTOHEADER, autoheader) - AM_MISSING_PROG(MAKEINFO, makeinfo) --AM_PROG_INSTALL_SH --AM_PROG_INSTALL_STRIP -+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl - AC_REQUIRE([AM_PROG_MKDIR_P])dnl - # We need awk for the "check" target. The system "awk" is bad on - # some platforms. -@@ -6435,20 +8458,37 @@ AC_REQUIRE([AC_PROG_AWK])dnl - AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AM_SET_LEADING_DOT])dnl - _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], -- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], -- [_AM_PROG_TAR([v7])])]) -+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], -+ [_AM_PROG_TAR([v7])])]) - _AM_IF_OPTION([no-dependencies],, - [AC_PROVIDE_IFELSE([AC_PROG_CC], -- [_AM_DEPENDENCIES(CC)], -- [define([AC_PROG_CC], -- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -+ [_AM_DEPENDENCIES(CC)], -+ [define([AC_PROG_CC], -+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl - AC_PROVIDE_IFELSE([AC_PROG_CXX], -- [_AM_DEPENDENCIES(CXX)], -- [define([AC_PROG_CXX], -- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -+ [_AM_DEPENDENCIES(CXX)], -+ [define([AC_PROG_CXX], -+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -+AC_PROVIDE_IFELSE([AC_PROG_OBJC], -+ [_AM_DEPENDENCIES(OBJC)], -+ [define([AC_PROG_OBJC], -+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl - ]) -+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl -+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the -+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro -+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. -+AC_CONFIG_COMMANDS_PRE(dnl -+[m4_provide_if([_AM_COMPILER_EXEEXT], -+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl - ]) - -+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -+dnl mangled by Autoconf and run in a shell conditional statement. -+m4_define([_AC_COMPILER_EXEEXT], -+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) -+ - - # When config.status generates a header, we must update the stamp-h file. - # This file resides in the same directory as the config header -@@ -6459,62 +8499,46 @@ AC_PROVIDE_IFELSE([AC_PROG_CXX], - # our stamp files there. - AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], - [# Compute $1's index in $config_headers. -+_am_arg=$1 - _am_stamp_count=1 - for _am_header in $config_headers :; do - case $_am_header in -- $1 | $1:* ) -+ $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac - done --echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) -+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -+ -+# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - - # AM_PROG_INSTALL_SH - # ------------------ - # Define $install_sh. -- --# Copyright (C) 2001, 2003 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -- - AC_DEFUN([AM_PROG_INSTALL_SH], - [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl --install_sh=${install_sh-"$am_aux_dir/install-sh"} -+if test x"${install_sh}" != xset; then -+ case $am_aux_dir in -+ *\ * | *\ *) -+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; -+ *) -+ install_sh="\${SHELL} $am_aux_dir/install-sh" -+ esac -+fi - AC_SUBST(install_sh)]) - --# -*- Autoconf -*- --# Copyright (C) 2003 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 2003, 2005 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# serial 1 -+# serial 2 - - # Check whether the underlying file-system supports filenames - # with a leading dot. For instance MS-DOS doesn't. -@@ -6529,26 +8553,15 @@ fi - rmdir .tst 2>/dev/null - AC_SUBST([am__leading_dot])]) - --# Check to see how 'make' treats includes. -*- Autoconf -*- -- --# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. -+# Check to see how 'make' treats includes. -*- Autoconf -*- - --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# serial 2 -+# serial 4 - - # AM_MAKE_INCLUDE() - # ----------------- -@@ -6557,7 +8570,7 @@ AC_DEFUN([AM_MAKE_INCLUDE], - [am_make=${MAKE-make} - cat > confinc << 'END' - am__doit: -- @echo done -+ @echo this is the am__doit target - .PHONY: am__doit - END - # If we don't find an include directive, just comment out the code. -@@ -6567,24 +8580,24 @@ am__quote= - _am_result=none - # First try GNU make style include. - echo "include confinc" > confmf --# We grep out `Entering directory' and `Leaving directory' --# messages which can occur if `w' ends up in MAKEFLAGS. --# In particular we don't look at `^make:' because GNU make might --# be invoked under some other name (usually "gmake"), in which --# case it prints its new name instead of `make'. --if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then -- am__include=include -- am__quote= -- _am_result=GNU --fi -+# Ignore all kinds of additional output from `make'. -+case `$am_make -s -f confmf 2> /dev/null` in #( -+*the\ am__doit\ target*) -+ am__include=include -+ am__quote= -+ _am_result=GNU -+ ;; -+esac - # Now try BSD make style include. - if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf -- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then -- am__include=.include -- am__quote="\"" -- _am_result=BSD -- fi -+ case `$am_make -s -f confmf 2> /dev/null` in #( -+ *the\ am__doit\ target*) -+ am__include=.include -+ am__quote="\"" -+ _am_result=BSD -+ ;; -+ esac - fi - AC_SUBST([am__include]) - AC_SUBST([am__quote]) -@@ -6592,27 +8605,51 @@ AC_MSG_RESULT([$_am_result]) - rm -f confinc confmf - ]) - --# -*- Autoconf -*- -- -+# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. -+# serial 6 - --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -+# AM_PROG_CC_C_O -+# -------------- -+# Like AC_PROG_CC_C_O, but changed for automake. -+AC_DEFUN([AM_PROG_CC_C_O], -+[AC_REQUIRE([AC_PROG_CC_C_O])dnl -+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -+AC_REQUIRE_AUX_FILE([compile])dnl -+# FIXME: we rely on the cache variable name because -+# there is no other way. -+set dummy $CC -+am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` -+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o -+if test "$am_t" != yes; then -+ # Losing compiler, so override with the script. -+ # FIXME: It is wrong to rewrite CC. -+ # But if we don't then we get into trouble of one sort or another. -+ # A longer-term fix would be to have automake use am__CC in this case, -+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" -+ CC="$am_aux_dir/compile $CC" -+fi -+dnl Make sure AC_PROG_CC is never called again, or it will override our -+dnl setting of CC. -+m4_define([AC_PROG_CC], -+ [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) -+]) - --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# serial 3 -+# serial 6 - - # AM_MISSING_PROG(NAME, PROGRAM) - # ------------------------------ -@@ -6628,7 +8665,15 @@ AC_SUBST($1)]) - # If it does, set am_missing_run to use it, otherwise, to nothing. - AC_DEFUN([AM_MISSING_HAS_RUN], - [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl --test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -+AC_REQUIRE_AUX_FILE([missing])dnl -+if test x"${MISSING+set}" != xset; then -+ case $am_aux_dir in -+ *\ * | *\ *) -+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; -+ *) -+ MISSING="\${SHELL} $am_aux_dir/missing" ;; -+ esac -+fi - # Use eval to expand $SHELL - if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -@@ -6638,100 +8683,41 @@ else - fi - ]) - -+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ - # AM_PROG_MKDIR_P - # --------------- --# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. -- --# Copyright (C) 2003, 2004 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -- --# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories --# created by `make install' are always world readable, even if the --# installer happens to have an overly restrictive umask (e.g. 077). --# This was a mistake. There are at least two reasons why we must not --# use `-m 0755': --# - it causes special bits like SGID to be ignored, --# - it may be too restrictive (some setups expect 775 directories). --# --# Do not use -m 0755 and let people choose whatever they expect by --# setting umask. --# --# We cannot accept any implementation of `mkdir' that recognizes `-p'. --# Some implementations (such as Solaris 8's) are not thread-safe: if a --# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' --# concurrently, both version can detect that a/ is missing, but only --# one can create it and the other will error out. Consequently we --# restrict ourselves to GNU make (using the --version option ensures --# this.) -+# Check for `mkdir -p'. - AC_DEFUN([AM_PROG_MKDIR_P], --[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then -- # We used to keeping the `.' as first argument, in order to -- # allow $(mkdir_p) to be used without argument. As in -- # $(mkdir_p) $(somedir) -- # where $(somedir) is conditionally defined. However this is wrong -- # for two reasons: -- # 1. if the package is installed by a user who cannot write `.' -- # make install will fail, -- # 2. the above comment should most certainly read -- # $(mkdir_p) $(DESTDIR)$(somedir) -- # so it does not work when $(somedir) is undefined and -- # $(DESTDIR) is not. -- # To support the latter case, we have to write -- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), -- # so the `.' trick is pointless. -- mkdir_p='mkdir -p --' --else -- # On NextStep and OpenStep, the `mkdir' command does not -- # recognize any option. It will interpret all options as -- # directories to create, and then abort because `.' already -- # exists. -- for d in ./-p ./--version; -- do -- test -d $d && rmdir $d -- done -- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. -- if test -f "$ac_aux_dir/mkinstalldirs"; then -- mkdir_p='$(mkinstalldirs)' -- else -- mkdir_p='$(install_sh) -d' -- fi --fi --AC_SUBST([mkdir_p])]) -- --# Helper functions for option handling. -*- Autoconf -*- -- --# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -+[AC_PREREQ([2.60])dnl -+AC_REQUIRE([AC_PROG_MKDIR_P])dnl -+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -+dnl while keeping a definition of mkdir_p for backward compatibility. -+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -+dnl Makefile.ins that do not define MKDIR_P, so we do our own -+dnl adjustment using top_builddir (which is defined more often than -+dnl MKDIR_P). -+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -+case $mkdir_p in -+ [[\\/$]]* | ?:[[\\/]]*) ;; -+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -+esac -+]) - --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -+# Helper functions for option handling. -*- Autoconf -*- - --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# serial 2 -+# serial 4 - - # _AM_MANGLE_OPTION(NAME) - # ----------------------- -@@ -6748,7 +8734,7 @@ AC_DEFUN([_AM_SET_OPTION], - # ---------------------------------- - # OPTIONS is a space-separated list of Automake options. - AC_DEFUN([_AM_SET_OPTIONS], --[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) -+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - - # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) - # ------------------------------------------- -@@ -6756,28 +8742,16 @@ AC_DEFUN([_AM_SET_OPTIONS], - AC_DEFUN([_AM_IF_OPTION], - [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - --# --# Check to make sure that the build environment is sane. --# -- --# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -+# Check to make sure that the build environment is sane. -*- Autoconf -*- - --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# serial 3 -+# serial 5 - - # AM_SANITY_CHECK - # --------------- -@@ -6786,16 +8760,29 @@ AC_DEFUN([AM_SANITY_CHECK], - # Just in case - sleep 1 - echo timestamp > conftest.file -+# Reject unsafe characters in $srcdir or the absolute working directory -+# name. Accept space and tab only in the latter. -+am_lf=' -+' -+case `pwd` in -+ *[[\\\"\#\$\&\'\`$am_lf]]*) -+ AC_MSG_ERROR([unsafe absolute working directory name]);; -+esac -+case $srcdir in -+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) -+ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; -+esac -+ - # Do `set' in a subshell so we don't clobber the current shell's - # arguments. Must try -L first in case configure is actually a - # symlink; some systems play weird games with the mod time of symlinks - # (eg FreeBSD returns the mod time of the symlink's containing - # directory). - if ( -- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` -+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. -- set X `ls -t $srcdir/configure conftest.file` -+ set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ -@@ -6820,25 +8807,14 @@ Check your system clock]) - fi - AC_MSG_RESULT(yes)]) - --# AM_PROG_INSTALL_STRIP -- --# Copyright (C) 2001, 2003 Free Software Foundation, Inc. -- --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -- --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -- --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - -+# AM_PROG_INSTALL_STRIP -+# --------------------- - # One issue with vendor `install' (even GNU) is that you can't - # specify the program used to strip binaries. This is especially - # annoying in cross-compiling environments, where the build's strip -@@ -6856,30 +8832,37 @@ dnl Don't test for $cross_compiling = ye - if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) - fi --INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - AC_SUBST([INSTALL_STRIP_PROGRAM])]) - --# Check how to create a tarball. -*- Autoconf -*- -+# Copyright (C) 2006, 2008 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - --# Copyright (C) 2004 Free Software Foundation, Inc. -+# serial 2 - --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2, or (at your option) --# any later version. -+# _AM_SUBST_NOTMAKE(VARIABLE) -+# --------------------------- -+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -+# This macro is traced by Automake. -+AC_DEFUN([_AM_SUBST_NOTMAKE]) - --# This program is distributed in the hope that it will be useful, --# but WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --# GNU General Public License for more details. -+# AM_SUBST_NOTMAKE(VARIABLE) -+# --------------------------- -+# Public sister of _AM_SUBST_NOTMAKE. -+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA --# 02111-1307, USA. -+# Check how to create a tarball. -*- Autoconf -*- - --# serial 1 -+# Copyright (C) 2004, 2005 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. - -+# serial 2 - - # _AM_PROG_TAR(FORMAT) - # -------------------- ---- raidutils-0.0.6.orig/config.guess -+++ raidutils-0.0.6/config.guess -@@ -1,9 +1,10 @@ - #! /bin/sh - # Attempt to guess a canonical system name. - # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, --# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. -+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 -+# Free Software Foundation, Inc. - --timestamp='2003-06-17' -+timestamp='2009-12-30' - - # This file is free software; you can redistribute it and/or modify it - # under the terms of the GNU General Public License as published by -@@ -17,23 +18,25 @@ timestamp='2003-06-17' - # - # You should have received a copy of the GNU General Public License - # along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -+# 02110-1301, USA. - # - # As a special exception to the GNU General Public License, if you - # distribute this file as part of a program that contains a - # configuration script generated by Autoconf, you may include it under - # the same distribution terms that you use for the rest of that program. - --# Originally written by Per Bothner . --# Please send patches to . Submit a context --# diff and a properly formatted ChangeLog entry. -+ -+# Originally written by Per Bothner. Please send patches (context -+# diff format) to and include a ChangeLog -+# entry. - # - # This script attempts to guess a canonical system name similar to - # config.sub. If it succeeds, it prints the system name on stdout, and - # exits with 0. Otherwise, it exits with 1. - # --# The plan is that this can be called by configure scripts if you --# don't specify an explicit build system type. -+# You can get the latest version of this script from: -+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD - - me=`echo "$0" | sed -e 's,.*/,,'` - -@@ -53,8 +56,9 @@ version="\ - GNU config.guess ($timestamp) - - Originally written by Per Bothner. --Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 --Free Software Foundation, Inc. -+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, -+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free -+Software Foundation, Inc. - - This is free software; see the source for copying conditions. There is NO - warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." -@@ -66,11 +70,11 @@ Try \`$me --help' for more information." - while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) -- echo "$timestamp" ; exit 0 ;; -+ echo "$timestamp" ; exit ;; - --version | -v ) -- echo "$version" ; exit 0 ;; -+ echo "$version" ; exit ;; - --help | --h* | -h ) -- echo "$usage"; exit 0 ;; -+ echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. -@@ -104,7 +108,7 @@ set_cc_for_build=' - trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; - trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; - : ${TMPDIR=/tmp} ; -- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || -+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -@@ -123,7 +127,7 @@ case $CC_FOR_BUILD,$HOST_CC,$CC in - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; --esac ;' -+esac ; set_cc_for_build= ;' - - # This is needed to find uname on a Pyramid OSx when run in the BSD universe. - # (ghazi@noc.rutgers.edu 1994-08-24) -@@ -136,13 +140,6 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` | - UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown - UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - --## for Red Hat Linux --if test -f /etc/redhat-release ; then -- VENDOR=redhat ; --else -- VENDOR= ; --fi -- - # Note: order is significant - the case branches are not exclusive. - - case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in -@@ -165,6 +162,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; -+ sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched -@@ -173,7 +171,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ -- | grep __ELF__ >/dev/null -+ | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? -@@ -203,50 +201,32 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" -- exit 0 ;; -- amiga:OpenBSD:*:*) -- echo m68k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- arc:OpenBSD:*:*) -- echo mipsel-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- hp300:OpenBSD:*:*) -- echo m68k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- mac68k:OpenBSD:*:*) -- echo m68k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- macppc:OpenBSD:*:*) -- echo powerpc-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- mvme68k:OpenBSD:*:*) -- echo m68k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- mvme88k:OpenBSD:*:*) -- echo m88k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- mvmeppc:OpenBSD:*:*) -- echo powerpc-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- pmax:OpenBSD:*:*) -- echo mipsel-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- sgi:OpenBSD:*:*) -- echo mipseb-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- sun3:OpenBSD:*:*) -- echo m68k-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -- wgrisc:OpenBSD:*:*) -- echo mipsel-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:OpenBSD:*:*) -- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} -- exit 0 ;; -+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` -+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} -+ exit ;; -+ *:ekkoBSD:*:*) -+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} -+ exit ;; -+ *:SolidBSD:*:*) -+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} -+ exit ;; -+ macppc:MirBSD:*:*) -+ echo powerpc-unknown-mirbsd${UNAME_RELEASE} -+ exit ;; -+ *:MirBSD:*:*) -+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} -+ exit ;; - alpha:OSF1:*:*) -- if test $UNAME_RELEASE = "V4.0"; then -+ case $UNAME_RELEASE in -+ *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` -- fi -+ ;; -+ *5.*) -+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` -+ ;; -+ esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU -@@ -284,42 +264,49 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac -+ # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. -- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` -- exit 0 ;; -- Alpha*:OpenVMS:*:*) -- echo alpha-hp-vms -- exit 0 ;; -+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` -+ exit ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix -- exit 0 ;; -+ exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 -- exit 0 ;; -+ exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 -- exit 0;; -+ exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos -- exit 0 ;; -+ exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos -- exit 0 ;; -+ exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition -- exit 0 ;; -+ exit ;; -+ *:z/VM:*:*) -+ echo s390-ibm-zvmoe -+ exit ;; -+ *:OS400:*:*) -+ echo powerpc-ibm-os400 -+ exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} -- exit 0;; -+ exit ;; -+ arm:riscos:*:*|arm:RISCOS:*:*) -+ echo arm-unknown-riscos -+ exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp -- exit 0;; -+ exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then -@@ -327,32 +314,51 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ - else - echo pyramid-pyramid-bsd - fi -- exit 0 ;; -+ exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 -- exit 0 ;; -+ exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 -- exit 0 ;; -- DRS?6000:UNIX_SV:4.2*:7*) -+ exit ;; -+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in -- sparc) echo sparc-icl-nx7 && exit 0 ;; -+ sparc) echo sparc-icl-nx7; exit ;; - esac ;; -+ s390x:SunOS:*:*) -+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -+ exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -- exit 0 ;; -+ exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -- exit 0 ;; -- i86pc:SunOS:5.*:*) -- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -- exit 0 ;; -+ exit ;; -+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) -+ echo i386-pc-auroraux${UNAME_RELEASE} -+ exit ;; -+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) -+ eval $set_cc_for_build -+ SUN_ARCH="i386" -+ # If there is a compiler, see if it is configured for 64-bit objects. -+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. -+ # This test works for both compilers. -+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then -+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ -+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ -+ grep IS_64BIT_ARCH >/dev/null -+ then -+ SUN_ARCH="x86_64" -+ fi -+ fi -+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -+ exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -- exit 0 ;; -+ exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) -@@ -361,10 +367,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` -- exit 0 ;; -+ exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 -@@ -376,10 +382,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac -- exit 0 ;; -+ exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor -@@ -390,37 +396,40 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; -+ m68k:machten:*:*) -+ echo m68k-apple-machten${UNAME_RELEASE} -+ exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 -- exit 0 ;; -+ exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -@@ -444,32 +453,33 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ - exit (-1); - } - EOF -- $CC_FOR_BUILD -o $dummy $dummy.c \ -- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/$[0-9]*$.*/\1/p'` \ -- && exit 0 -+ $CC_FOR_BUILD -o $dummy $dummy.c && -+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/$[0-9]*$.*/\1/p'` && -+ SYSTEM_NAME=`$dummy $dummyarg` && -+ { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax -- exit 0 ;; -+ exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax -- exit 0 ;; -+ exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax -- exit 0 ;; -+ exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix -- exit 0 ;; -+ exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 -- exit 0 ;; -+ exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 -- exit 0 ;; -+ exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 -- exit 0 ;; -+ exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` -@@ -485,29 +495,29 @@ EOF - else - echo i586-dg-dgux${UNAME_RELEASE} - fi -- exit 0 ;; -+ exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 -- exit 0 ;; -+ exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 -- exit 0 ;; -+ exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 -- exit 0 ;; -+ exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd -- exit 0 ;; -+ exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` -- exit 0 ;; -+ exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. -- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id -- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' -+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id -+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix -- exit 0 ;; -+ exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` -@@ -515,7 +525,7 @@ EOF - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} -- exit 0 ;; -+ exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build -@@ -530,15 +540,19 @@ EOF - exit(0); - } - EOF -- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 -- echo rs6000-ibm-aix3.2.5 -+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` -+ then -+ echo "$SYSTEM_NAME" -+ else -+ echo rs6000-ibm-aix3.2.5 -+ fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi -- exit 0 ;; -- *:AIX:*:[45]) -+ exit ;; -+ *:AIX:*:[456]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 -@@ -551,28 +565,28 @@ EOF - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} -- exit 0 ;; -+ exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix -- exit 0 ;; -+ exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 -- exit 0 ;; -+ exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to -- exit 0 ;; # report: romp-ibm BSD 4.3 -+ exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx -- exit 0 ;; -+ exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 -- exit 0 ;; -+ exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd -- exit 0 ;; -+ exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 -- exit 0 ;; -+ exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in -@@ -634,9 +648,19 @@ EOF - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then -- # avoid double evaluation of $set_cc_for_build -- test -n "$CC_FOR_BUILD" || eval $set_cc_for_build -- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null -+ eval $set_cc_for_build -+ -+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating -+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler -+ # generating 64-bit code. GNU and HP use different nomenclature: -+ # -+ # $ CC_FOR_BUILD=cc ./config.guess -+ # => hppa2.0w-hp-hpux11.23 -+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess -+ # => hppa64-hp-hpux11.23 -+ -+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | -+ grep -q __LP64__ - then - HP_ARCH="hppa2.0w" - else -@@ -644,11 +668,11 @@ EOF - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} -- exit 0 ;; -+ exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} -- exit 0 ;; -+ exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -@@ -676,208 +700,248 @@ EOF - exit (0); - } - EOF -- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 -+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && -+ { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 -- exit 0 ;; -+ exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd -- exit 0 ;; -+ exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd -- exit 0 ;; -+ exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix -- exit 0 ;; -+ exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf -- exit 0 ;; -+ exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf -- exit 0 ;; -+ exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi -- exit 0 ;; -+ exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites -- exit 0 ;; -+ exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd -- exit 0 ;; -+ exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi -- exit 0 ;; -+ exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd -- exit 0 ;; -+ exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd -- exit 0 ;; -+ exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd -- exit 0 ;; -+ exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*$[A-Z]90$/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ exit ;; - *:UNICOS/mp:*:*) -- echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -- exit 0 ;; -+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' -+ exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" -- exit 0 ;; -+ exit ;; -+ 5000:UNIX_System_V:4.*:*) -+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` -+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` -+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" -+ exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} -- exit 0 ;; -- *:FreeBSD:*:*|*:GNU/FreeBSD:*:*) -- # Determine whether the default compiler uses glibc. -- eval $set_cc_for_build -- sed 's/^ //' << EOF >$dummy.c -- #include -- #if __GLIBC__ >= 2 -- LIBC=gnu -- #else -- LIBC= -- #endif --EOF -- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` -- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} -- exit 0 ;; -+ exit ;; -+ *:FreeBSD:*:*) -+ case ${UNAME_MACHINE} in -+ pc98) -+ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; -+ amd64) -+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; -+ *) -+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; -+ esac -+ exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin -- exit 0 ;; -- i*:MINGW*:*) -+ exit ;; -+ *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 -- exit 0 ;; -+ exit ;; -+ i*:windows32*:*) -+ # uname -m includes "-pc" on this system. -+ echo ${UNAME_MACHINE}-mingw32 -+ exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 -- exit 0 ;; -- x86:Interix*:[34]*) -- echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' -- exit 0 ;; -+ exit ;; -+ *:Interix*:*) -+ case ${UNAME_MACHINE} in -+ x86) -+ echo i586-pc-interix${UNAME_RELEASE} -+ exit ;; -+ authenticamd | genuineintel | EM64T) -+ echo x86_64-unknown-interix${UNAME_RELEASE} -+ exit ;; -+ IA64) -+ echo ia64-unknown-interix${UNAME_RELEASE} -+ exit ;; -+ esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks -- exit 0 ;; -+ exit ;; -+ 8664:Windows_NT:*) -+ echo x86_64-pc-mks -+ exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix -- exit 0 ;; -+ exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin -- exit 0 ;; -+ exit ;; -+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) -+ echo x86_64-unknown-cygwin -+ exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin -- exit 0 ;; -+ exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` -- exit 0 ;; -+ exit ;; - *:GNU:*:*) -+ # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` -- exit 0 ;; -+ exit ;; -+ *:GNU/*:*:*) -+ # other systems with GNU libc and userland -+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu -+ exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix -- exit 0 ;; -+ exit ;; -+ alpha:Linux:*:*) -+ case `sed -n '/^cpu model/s/^.*: $.*$/\1/p' < /proc/cpuinfo` in -+ EV5) UNAME_MACHINE=alphaev5 ;; -+ EV56) UNAME_MACHINE=alphaev56 ;; -+ PCA56) UNAME_MACHINE=alphapca56 ;; -+ PCA57) UNAME_MACHINE=alphapca56 ;; -+ EV6) UNAME_MACHINE=alphaev6 ;; -+ EV67) UNAME_MACHINE=alphaev67 ;; -+ EV68*) UNAME_MACHINE=alphaev68 ;; -+ esac -+ objdump --private-headers /bin/sh | grep -q ld.so.1 -+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi -+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} -+ exit ;; - arm*:Linux:*:*) -+ eval $set_cc_for_build -+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ -+ | grep -q __ARM_EABI__ -+ then -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ else -+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi -+ fi -+ exit ;; -+ avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu -- exit 0 ;; -+ exit ;; - cris:Linux:*:*) - echo cris-axis-linux-gnu -- exit 0 ;; -- ia64:Linux:*:*) -- echo ${UNAME_MACHINE}-${VENDOR:-unknown}-linux-gnu -- exit 0 ;; -- m68*:Linux:*:*) -- echo ${UNAME_MACHINE}-unknown-linux-gnu -- exit 0 ;; -- mips:Linux:*:*) -+ exit ;; -+ crisv32:Linux:*:*) -+ echo crisv32-axis-linux-gnu -+ exit ;; -+ frv:Linux:*:*) -+ echo frv-unknown-linux-gnu -+ exit ;; -+ i*86:Linux:*:*) -+ LIBC=gnu - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -- #undef CPU -- #undef mips -- #undef mipsel -- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) -- CPU=mipsel -- #else -- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) -- CPU=mips -- #else -- CPU= -- #endif -+ #ifdef __dietlibc__ -+ LIBC=dietlibc - #endif - EOF -- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` -- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 -- ;; -- mips64:Linux:*:*) -+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` -+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}" -+ exit ;; -+ ia64:Linux:*:*) -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; -+ m32r*:Linux:*:*) -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; -+ m68*:Linux:*:*) -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; -+ mips:Linux:*:* | mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU -- #undef mips64 -- #undef mips64el -+ #undef ${UNAME_MACHINE} -+ #undef ${UNAME_MACHINE}el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) -- CPU=mips64el -+ CPU=${UNAME_MACHINE}el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) -- CPU=mips64 -+ CPU=${UNAME_MACHINE} - #else - CPU= - #endif - #endif - EOF -- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` -- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 -+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` -+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; -- ppc:Linux:*:*) -- echo powerpc-${VENDOR:-unknown}-linux-gnu -- exit 0 ;; -- ppc64:Linux:*:*) -- echo powerpc64-${VENDOR:-unknown}-linux-gnu -- exit 0 ;; -- alpha:Linux:*:*) -- case `sed -n '/^cpu model/s/^.*: $.*$/\1/p' < /proc/cpuinfo` in -- EV5) UNAME_MACHINE=alphaev5 ;; -- EV56) UNAME_MACHINE=alphaev56 ;; -- PCA56) UNAME_MACHINE=alphapca56 ;; -- PCA57) UNAME_MACHINE=alphapca56 ;; -- EV6) UNAME_MACHINE=alphaev6 ;; -- EV67) UNAME_MACHINE=alphaev67 ;; -- EV68*) UNAME_MACHINE=alphaev68 ;; -- esac -- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null -- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi -- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} -- exit 0 ;; -+ or32:Linux:*:*) -+ echo or32-unknown-linux-gnu -+ exit ;; -+ padre:Linux:*:*) -+ echo sparc-unknown-linux-gnu -+ exit ;; -+ parisc64:Linux:*:* | hppa64:Linux:*:*) -+ echo hppa64-unknown-linux-gnu -+ exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in -@@ -885,84 +949,40 @@ EOF - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac -- exit 0 ;; -- parisc64:Linux:*:* | hppa64:Linux:*:*) -- echo hppa64-unknown-linux-gnu -- exit 0 ;; -+ exit ;; -+ ppc64:Linux:*:*) -+ echo powerpc64-unknown-linux-gnu -+ exit ;; -+ ppc:Linux:*:*) -+ echo powerpc-unknown-linux-gnu -+ exit ;; - s390:Linux:*:* | s390x:Linux:*:*) -- echo ${UNAME_MACHINE}-${VENDOR:-ibm}-linux-gnu -- exit 0 ;; -+ echo ${UNAME_MACHINE}-ibm-linux -+ exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu -- exit 0 ;; -+ exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu -- exit 0 ;; -+ exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu -- exit 0 ;; -+ exit ;; -+ vax:Linux:*:*) -+ echo ${UNAME_MACHINE}-dec-linux-gnu -+ exit ;; - x86_64:Linux:*:*) -- echo x86_64-${VENDOR:-unknown}-linux-gnu -- exit 0 ;; -- i*86:Linux:*:*) -- # The BFD linker knows what the default object file format is, so -- # first see if it will tell us. cd to the root directory to prevent -- # problems with other programs or directories called `ld' in the path. -- # Set LC_ALL=C to ensure ld outputs messages in English. -- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ -- | sed -ne '/supported targets:/!d -- s/[ ][ ]*/ /g -- s/.*supported targets: *// -- s/ .*// -- p'` -- case "$ld_supported_targets" in -- elf32-i386) -- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" -- ;; -- a.out-i386-linux) -- echo "${UNAME_MACHINE}-pc-linux-gnuaout" -- exit 0 ;; -- coff-i386) -- echo "${UNAME_MACHINE}-pc-linux-gnucoff" -- exit 0 ;; -- "") -- # Either a pre-BFD a.out linker (linux-gnuoldld) or -- # one that does not give us useful --help. -- echo "${UNAME_MACHINE}-pc-linux-gnuoldld" -- exit 0 ;; -- esac -- # Determine whether the default compiler is a.out or elf -- eval $set_cc_for_build -- sed 's/^ //' << EOF >$dummy.c -- #include -- #ifdef __ELF__ -- # ifdef __GLIBC__ -- # if __GLIBC__ >= 2 -- LIBC=gnu -- # else -- LIBC=gnulibc1 -- # endif -- # else -- LIBC=gnulibc1 -- # endif -- #else -- #ifdef __INTEL_COMPILER -- LIBC=gnu -- #else -- LIBC=gnuaout -- #endif -- #endif --EOF -- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` -- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-${VENDOR:-pc}-linux-${LIBC}" && exit 0 -- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 -- ;; -+ echo x86_64-unknown-linux-gnu -+ exit ;; -+ xtensa*:Linux:*:*) -+ echo ${UNAME_MACHINE}-unknown-linux-gnu -+ exit ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 -- exit 0 ;; -+ exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... -@@ -970,24 +990,27 @@ EOF - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} -- exit 0 ;; -+ exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx -- exit 0 ;; -+ exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop -- exit 0 ;; -+ exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos -- exit 0 ;; -- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) -+ exit ;; -+ i*86:syllable:*:*) -+ echo ${UNAME_MACHINE}-pc-syllable -+ exit ;; -+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp -- exit 0 ;; -+ exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then -@@ -995,15 +1018,16 @@ EOF - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi -- exit 0 ;; -- i*86:*:5:[78]*) -+ exit ;; -+ i*86:*:5:[678]*) -+ # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} -- exit 0 ;; -+ exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi -- exit 0 ;; -+ exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv -- exit 0 ;; -+ exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv -- exit 0 ;; -+ exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix -- exit 0 ;; -- M68*:*:R3V[567]*:*) -- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; -- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) -+ exit ;; -+ M68*:*:R3V[5678]*:*) -+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; -+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* $[0-9][0-9]$.*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ -- && echo i486-ncr-sysv4.3${OS_REL} && exit 0 -+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ -- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; -+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ -- && echo i486-ncr-sysv4 && exit 0 ;; -+ && { echo i486-ncr-sysv4; exit; } ;; -+ NCR*:*:4.2:* | MPRAS*:*:4.2:*) -+ OS_REL='.3' -+ test -r /etc/.relid \ -+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* $[0-9][0-9]$.*/\1/p' < /etc/.relid` -+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ -+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } -+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ -+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } -+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ -+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 -- exit 0 ;; -+ exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} -- exit 0 ;; -- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) -+ exit ;; -+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 -- exit 0 ;; -+ exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 -- exit 0 ;; -+ exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` -@@ -1095,68 +1132,94 @@ EOF - else - echo ns32k-sni-sysv - fi -- exit 0 ;; -+ exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 -- exit 0 ;; -+ exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 -- exit 0 ;; -+ exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 -- exit 0 ;; -+ exit ;; -+ i*86:VOS:*:*) -+ # From Paul.Green@stratus.com. -+ echo ${UNAME_MACHINE}-stratus-vos -+ exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos -- exit 0 ;; -+ exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 -- exit 0 ;; -+ exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi -- exit 0 ;; -+ exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos -- exit 0 ;; -+ exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos -- exit 0 ;; -+ exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos -- exit 0 ;; -+ exit ;; -+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible. -+ echo i586-pc-haiku -+ exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; -+ SX-7:SUPER-UX:*:*) -+ echo sx7-nec-superux${UNAME_RELEASE} -+ exit ;; -+ SX-8:SUPER-UX:*:*) -+ echo sx8-nec-superux${UNAME_RELEASE} -+ exit ;; -+ SX-8R:SUPER-UX:*:*) -+ echo sx8r-nec-superux${UNAME_RELEASE} -+ exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:Darwin:*:*) -- case `uname -p` in -- *86) UNAME_PROCESSOR=i686 ;; -- powerpc) UNAME_PROCESSOR=powerpc ;; -+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown -+ case $UNAME_PROCESSOR in -+ i386) -+ eval $set_cc_for_build -+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then -+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ -+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ -+ grep IS_64BIT_ARCH >/dev/null -+ then -+ UNAME_PROCESSOR="x86_64" -+ fi -+ fi ;; -+ unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then -@@ -1164,22 +1227,25 @@ EOF - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:QNX:*:4*) - echo i386-pc-qnx -- exit 0 ;; -- NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) -+ exit ;; -+ NSE-?:NONSTOP_KERNEL:*:*) -+ echo nse-tandem-nsk${UNAME_RELEASE} -+ exit ;; -+ NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux -- exit 0 ;; -+ exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv -- exit 0 ;; -+ exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 -@@ -1190,28 +1256,50 @@ EOF - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 -- exit 0 ;; -+ exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 -- exit 0 ;; -+ exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex -- exit 0 ;; -+ exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 -- exit 0 ;; -+ exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 -- exit 0 ;; -+ exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 -- exit 0 ;; -+ exit ;; - *:ITS:*:*) - echo pdp10-unknown-its -- exit 0 ;; -+ exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} -- exit 0 ;; -+ exit ;; -+ *:DragonFly:*:*) -+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` -+ exit ;; -+ *:*VMS:*:*) -+ UNAME_MACHINE=`(uname -p) 2>/dev/null` -+ case "${UNAME_MACHINE}" in -+ A*) echo alpha-dec-vms ; exit ;; -+ I*) echo ia64-dec-vms ; exit ;; -+ V*) echo vax-dec-vms ; exit ;; -+ esac ;; -+ *:XENIX:*:SysV) -+ echo i386-pc-xenix -+ exit ;; -+ i*86:skyos:*:*) -+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' -+ exit ;; -+ i*86:rdos:*:*) -+ echo ${UNAME_MACHINE}-pc-rdos -+ exit ;; -+ i*86:AROS:*:*) -+ echo ${UNAME_MACHINE}-pc-aros -+ exit ;; - esac - - #echo '(No uname command or uname output not recognized.)' 1>&2 -@@ -1243,7 +1331,7 @@ main () - #endif - - #if defined (__arm) && defined (__acorn) && defined (__unix) -- printf ("arm-acorn-riscix"); exit (0); -+ printf ("arm-acorn-riscix\n"); exit (0); - #endif - - #if defined (hp300) && !defined (hpux) -@@ -1332,11 +1420,12 @@ main () - } - EOF - --$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 -+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && -+ { echo "$SYSTEM_NAME"; exit; } - - # Apollos put the system type in the environment. - --test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } -+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - - # Convex versions that predate uname can use getsysinfo(1) - -@@ -1345,22 +1434,22 @@ then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd -- exit 0 ;; -+ exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi -- exit 0 ;; -+ exit ;; - c34*) - echo c34-convex-bsd -- exit 0 ;; -+ exit ;; - c38*) - echo c38-convex-bsd -- exit 0 ;; -+ exit ;; - c4*) - echo c4-convex-bsd -- exit 0 ;; -+ exit ;; - esac - fi - -@@ -1371,7 +1460,9 @@ This script, last modified $timestamp, h - the operating system you are using. It is advised that you - download the most up to date version of the config scripts from - -- ftp://ftp.gnu.org/pub/gnu/config/ -+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD -+and -+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD - - If the version you run ($0) is already up to date, please - send the following data and any information you think might be ---- raidutils-0.0.6.orig/Makefile.am -+++ raidutils-0.0.6/Makefile.am -@@ -1 +1,2 @@ - SUBDIRS=lib raidutil raideng -+ACLOCAL_AMFLAGS=-I m4 ---- raidutils-0.0.6.orig/configure -+++ raidutils-0.0.6/configure -@@ -1,81 +1,415 @@ - #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. --# Generated by GNU Autoconf 2.59 for I2O RAID Utilities 0.0.6. -+# Generated by GNU Autoconf 2.67 for I2O RAID Utilities 0.0.6. -+# -+# -+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -+# Foundation, Inc. -+# - # --# Copyright (C) 2003 Free Software Foundation, Inc. - # This configure script is free software; the Free Software Foundation - # gives unlimited permission to copy, distribute and modify it. --## --------------------- ## --## M4sh Initialization. ## --## --------------------- ## -+## -------------------- ## -+## M4sh Initialization. ## -+## -------------------- ## - --# Be Bourne compatible --if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: -- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' --elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -- set -o posix -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in #( -+ *posix*) : -+ set -o posix ;; #( -+ *) : -+ ;; -+esac - fi --DUALCASE=1; export DUALCASE # for MKS sh - --# Support unset when possible. --if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -- as_unset=unset --else -- as_unset=false -+ -+as_nl=' -+' -+export as_nl -+# Printing a long string crashes Solaris 7 /usr/bin/printf. -+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -+# Prefer a ksh shell builtin over an external printf program on Solaris, -+# but without wasting forks for bash or zsh. -+if test -z "$BASH_VERSION$ZSH_VERSION" \ -+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then -+ as_echo='print -r --' -+ as_echo_n='print -rn --' -+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then -+ as_echo='printf %s\n' -+ as_echo_n='printf %s' -+else -+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then -+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' -+ as_echo_n='/usr/ucb/echo -n' -+ else -+ as_echo_body='eval expr "X$1" : "X\$.*\$"' -+ as_echo_n_body='eval -+ arg=$1; -+ case $arg in #( -+ *"$as_nl"*) -+ expr "X$arg" : "X\$.*\$$as_nl"; -+ arg=`expr "X$arg" : ".*$as_nl\$.*\$"`;; -+ esac; -+ expr "X$arg" : "X\$.*\$" | tr -d "$as_nl" -+ ' -+ export as_echo_n_body -+ as_echo_n='sh -c $as_echo_n_body as_echo' -+ fi -+ export as_echo_body -+ as_echo='sh -c $as_echo_body as_echo' - fi - -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ PATH_SEPARATOR=: -+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { -+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || -+ PATH_SEPARATOR=';' -+ } -+fi -+ -+ -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in #(( -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+ done -+IFS=$as_save_IFS - --# Work around bugs in pre-3.0 UWIN ksh. --$as_unset ENV MAIL MAILPATH -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ exit 1 -+fi -+ -+# Unset variables that we do not need and which cause bugs (e.g. in -+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -+# suppresses any "Segmentation fault" message there. '((' could -+# trigger a bug in pdksh 5.2.14. -+for as_var in BASH_ENV ENV MAIL MAILPATH -+do eval test x\${$as_var+set} = xset \ -+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -+done - PS1='$ ' - PS2='> ' - PS4='+ ' - - # NLS nuisances. --for as_var in \ -- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -- LC_TELEPHONE LC_TIME -+LC_ALL=C -+export LC_ALL -+LANGUAGE=C -+export LANGUAGE -+ -+# CDPATH. -+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -+ -+if test "x$CONFIG_SHELL" = x; then -+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : -+ emulate sh -+ NULLCMD=: -+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '\${1+\"\$@\"}'='\"\$@\"' -+ setopt NO_GLOB_SUBST -+else -+ case \`(set -o) 2>/dev/null\` in #( -+ *posix*) : -+ set -o posix ;; #( -+ *) : -+ ;; -+esac -+fi -+" -+ as_required="as_fn_return () { (exit \$1); } -+as_fn_success () { as_fn_return 0; } -+as_fn_failure () { as_fn_return 1; } -+as_fn_ret_success () { return 0; } -+as_fn_ret_failure () { return 1; } -+ -+exitcode=0 -+as_fn_success || { exitcode=1; echo as_fn_success failed.; } -+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : -+ -+else -+ exitcode=1; echo positional parameters were not saved. -+fi -+test x\$exitcode = x0 || exit 1" -+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO -+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO -+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && -+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -+test \$(( 1 + 1 )) = 2 || exit 1" -+ if (eval "$as_required") 2>/dev/null; then : -+ as_have_required=yes -+else -+ as_have_required=no -+fi -+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : -+ -+else -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+as_found=false -+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH - do -- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -- eval $as_var=C; export $as_var -- else -- $as_unset $as_var -- fi -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ as_found=: -+ case $as_dir in #( -+ /*) -+ for as_base in sh bash ksh sh5; do -+ # Try only shells that exist, to save several forks. -+ as_shell=$as_dir/$as_base -+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && -+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : -+ CONFIG_SHELL=$as_shell as_have_required=yes -+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : -+ break 2 -+fi -+fi -+ done;; -+ esac -+ as_found=false - done -+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && -+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : -+ CONFIG_SHELL=$SHELL as_have_required=yes -+fi; } -+IFS=$as_save_IFS -+ -+ -+ if test "x$CONFIG_SHELL" != x; then : -+ # We cannot yet assume a decent shell, so we have to provide a -+ # neutralization value for shells without unset; and this also -+ # works around shells that cannot unset nonexistent variables. -+ BASH_ENV=/dev/null -+ ENV=/dev/null -+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -+ export CONFIG_SHELL -+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -+fi -+ -+ if test x$as_have_required = xno; then : -+ $as_echo "$0: This script requires a shell more modern than all" -+ $as_echo "$0: the shells that I found on your system." -+ if test x${ZSH_VERSION+set} = xset ; then -+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" -+ $as_echo "$0: be upgraded to zsh 4.3.4 or later." -+ else -+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, -+$0: including any error possibly output before this -+$0: message. Then install a modern shell, or manually run -+$0: the script under such a shell if you do have one." -+ fi -+ exit 1 -+fi -+fi -+fi -+SHELL=${CONFIG_SHELL-/bin/sh} -+export SHELL -+# Unset more variables known to interfere with behavior of common tools. -+CLICOLOR_FORCE= GREP_OPTIONS= -+unset CLICOLOR_FORCE GREP_OPTIONS -+ -+## --------------------- ## -+## M4sh Shell Functions. ## -+## --------------------- ## -+# as_fn_unset VAR -+# --------------- -+# Portably unset VAR. -+as_fn_unset () -+{ -+ { eval $1=; unset $1;} -+} -+as_unset=as_fn_unset -+ -+# as_fn_set_status STATUS -+# ----------------------- -+# Set $? to STATUS, without forking. -+as_fn_set_status () -+{ -+ return $1 -+} # as_fn_set_status -+ -+# as_fn_exit STATUS -+# ----------------- -+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -+as_fn_exit () -+{ -+ set +e -+ as_fn_set_status $1 -+ exit $1 -+} # as_fn_exit -+ -+# as_fn_mkdir_p -+# ------------- -+# Create "$as_dir" as a directory, including parents if necessary. -+as_fn_mkdir_p () -+{ -+ -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || eval $as_mkdir_p || { -+ as_dirs= -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || -+$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -+ X"$as_dir" : 'X$//$[^/]' \| \ -+ X"$as_dir" : 'X$//$$' \| \ -+ X"$as_dir" : 'X$/$' \| . 2>/dev/null || -+$as_echo X"$as_dir" | -+ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/$.*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break -+ done -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" -+ -+ -+} # as_fn_mkdir_p -+# as_fn_append VAR VALUE -+# ---------------------- -+# Append the text in VALUE to the end of the definition contained in VAR. Take -+# advantage of any shell optimizations that allow amortized linear growth over -+# repeated appends, instead of the typical quadratic growth present in naive -+# implementations. -+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : -+ eval 'as_fn_append () -+ { -+ eval $1+=\$2 -+ }' -+else -+ as_fn_append () -+ { -+ eval $1=\$$1\$2 -+ } -+fi # as_fn_append - --# Required to use basename. --if expr a : '$a$' >/dev/null 2>&1; then -+# as_fn_arith ARG... -+# ------------------ -+# Perform arithmetic evaluation on the ARGs, and store the result in the -+# global $as_val. Take advantage of shells that can avoid forks. The arguments -+# must be portable across $(()) and expr. -+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : -+ eval 'as_fn_arith () -+ { -+ as_val=$(( $* )) -+ }' -+else -+ as_fn_arith () -+ { -+ as_val=`expr "$@" || test $? -eq 1` -+ } -+fi # as_fn_arith -+ -+ -+# as_fn_error STATUS ERROR [LINENO LOG_FD] -+# ---------------------------------------- -+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -+# script with STATUS, using 1 if that was 0. -+as_fn_error () -+{ -+ as_status=$1; test $as_status -eq 0 && as_status=1 -+ if test "$4"; then -+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 -+ fi -+ $as_echo "$as_me: error: $2" >&2 -+ as_fn_exit $as_status -+} # as_fn_error -+ -+if expr a : '$a$' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*$...$'`" = X001; then - as_expr=expr - else - as_expr=false - fi - --if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename - else - as_basename=false - fi - -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi - --# Name of the executable. --as_me=`$as_basename "$0" || -+as_me=`$as_basename -- "$0" || - $as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \ - X"$0" : 'X$//$$' \| \ -- X"$0" : 'X$/$$' \| \ -- . : '$.$' 2>/dev/null || --echo X/"$0" | -- sed '/^.*\/$[^/][^/]*$\/*$/{ s//\1/; q; } -- /^X\/$\/\/$$/{ s//\1/; q; } -- /^X\/$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` -- -+ X"$0" : 'X$/$' \| . 2>/dev/null || -+$as_echo X/"$0" | -+ sed '/^.*\/$[^/][^/]*$\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/$\/\/$$/{ -+ s//\1/ -+ q -+ } -+ /^X\/$\/$.*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - --# PATH needs CR, and LINENO needs CR and PATH. - # Avoid depending upon Character Ranges. - as_cr_letters='abcdefghijklmnopqrstuvwxyz' - as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -@@ -83,146 +417,107 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE - as_cr_digits='0123456789' - as_cr_alnum=$as_cr_Letters$as_cr_digits - --# The user is always right. --if test "${PATH_SEPARATOR+set}" != set; then -- echo "#! /bin/sh" >conf$$.sh -- echo "exit 0" >>conf$$.sh -- chmod +x conf$$.sh -- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -- PATH_SEPARATOR=';' -- else -- PATH_SEPARATOR=: -- fi -- rm -f conf$$.sh --fi -- -- -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" || { -- # Find who we are. Look in the path if we contain no path at all -- # relative or not. -- case $0 in -- *[\\/]* ) as_myself=$0 ;; -- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break --done -- -- ;; -- esac -- # We did not find ourselves, most probably we were run as `sh COMMAND' -- # in which case we are not to be found in the path. -- if test "x$as_myself" = x; then -- as_myself=$0 -- fi -- if test ! -f "$as_myself"; then -- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 -- { (exit 1); exit 1; }; } -- fi -- case $CONFIG_SHELL in -- '') -- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for as_base in sh bash ksh sh5; do -- case $as_dir in -- /*) -- if ("$as_dir/$as_base" -c ' -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then -- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } -- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } -- CONFIG_SHELL=$as_dir/$as_base -- export CONFIG_SHELL -- exec "$CONFIG_SHELL" "$0" ${1+"$@"} -- fi;; -- esac -- done --done --;; -- esac - -- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -- # uniformly replaced by the line number. The first 'sed' inserts a -- # line-number line before each line; the second 'sed' does the real -- # work. The second script uses 'N' to pair each line-number line -- # with the numbered line, and appends trailing '-' during -- # substitution so that $LINENO is not a special case at line end. -- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) -- sed '=' <$as_myself | -+ as_lineno_1=$LINENO as_lineno_1a=$LINENO -+ as_lineno_2=$LINENO as_lineno_2a=$LINENO -+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && -+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { -+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | - sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno - N -- s,$,-, -- : loop -- s,^$['$as_cr_digits']*$$.*$[$]LINENO$[^'$as_cr_alnum'_]$,\1\2\1\3, -+ :loop -+ s/[$]LINENO$[^'$as_cr_alnum'_].*\n$$.*$/\2\1\2/ - t loop -- s,-$,, -- s,^['$as_cr_digits']*\n,, -+ s/-\n.*// - ' >$as_me.lineno && -- chmod +x $as_me.lineno || -- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 -- { (exit 1); exit 1; }; } -+ chmod +x "$as_me.lineno" || -+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the -- # original and so on. Autoconf is especially sensible to this). -- . ./$as_me.lineno -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" - # Exit status is that of the last command. - exit - } - -- --case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in -- *c*,-n*) ECHO_N= ECHO_C=' --' ECHO_T=' ' ;; -- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; -- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in #((((( -+-n*) -+ case `echo 'xy\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ xy) ECHO_C='\c';; -+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null -+ ECHO_T=' ';; -+ esac;; -+*) -+ ECHO_N='-n';; - esac - --if expr a : '$a$' >/dev/null 2>&1; then -- as_expr=expr -+rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file - else -- as_expr=false -+ rm -f conf$$.dir -+ mkdir conf$$.dir 2>/dev/null - fi -- --rm -f conf$$ conf$$.exe conf$$.file --echo >conf$$.file --if ln -s conf$$.file conf$$ 2>/dev/null; then -- # We could just check for DJGPP; but this test a) works b) is more generic -- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). -- if test -f conf$$.exe; then -- # Don't use ln at all; we don't have any links -- as_ln_s='cp -p' -- else -+if (echo >conf$$.file) 2>/dev/null; then -+ if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -+ as_ln_s='cp -p' -+ elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+ else -+ as_ln_s='cp -p' - fi --elif ln conf$$.file conf$$ 2>/dev/null; then -- as_ln_s=ln - else - as_ln_s='cp -p' - fi --rm -f conf$$ conf$$.exe conf$$.file -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null - - if mkdir -p . 2>/dev/null; then -- as_mkdir_p=: -+ as_mkdir_p='mkdir -p "$as_dir"' - else - test -d ./-p && rmdir ./-p - as_mkdir_p=false - fi - --as_executable_p="test -f" -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in #( -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x - - # Sed expression to map a string onto a valid CPP name. - as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -@@ -231,36 +526,26 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P - as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - --# IFS --# We need space, tab and new line, in precisely that order. --as_nl=' --' --IFS=" $as_nl" -- --# CDPATH. --$as_unset CDPATH -- -- - - # Check that we are running under the correct shell. - SHELL=${CONFIG_SHELL-/bin/sh} - --case X$ECHO in -+case X$lt_ECHO in - X*--fallback-echo) - # Remove one level of quotation (which was required for Make). -- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` -+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; - esac - --echo=${ECHO-echo} -+ECHO=${lt_ECHO-echo} - if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : --elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then -- # Yippee, $echo works! -+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then -+ # Yippee, $ECHO works! - : - else - # Restart under the correct shell. -@@ -270,153 +555,145 @@ fi - if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift -- cat </dev/null 2>&1 && unset CDPATH - --if test -z "$ECHO"; then --if test "X${echo_test_string+set}" != Xset; then --# find a string as large as possible, as long as the shell can cope with it -- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do -- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... -- if (echo_test_string="`eval $cmd`") 2>/dev/null && -- echo_test_string="`eval $cmd`" && -- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null -- then -- break -- fi -- done --fi -+if test -z "$lt_ECHO"; then -+ if test "X${echo_test_string+set}" != Xset; then -+ # find a string as large as possible, as long as the shell can cope with it -+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do -+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... -+ if { echo_test_string=`eval $cmd`; } 2>/dev/null && -+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null -+ then -+ break -+ fi -+ done -+ fi - --if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && -- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- : --else -- # The Solaris, AIX, and Digital Unix default echo programs unquote -- # backslashes. This makes it impossible to quote backslashes using -- # echo "$something" | sed 's/\\/\\\\/g' -- # -- # So, first we look for a working echo in the user's PATH. -+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ : -+ else -+ # The Solaris, AIX, and Digital Unix default echo programs unquote -+ # backslashes. This makes it impossible to quote backslashes using -+ # echo "$something" | sed 's/\\/\\\\/g' -+ # -+ # So, first we look for a working echo in the user's PATH. - -- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -- for dir in $PATH /usr/ucb; do -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+ for dir in $PATH /usr/ucb; do -+ IFS="$lt_save_ifs" -+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && -+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ ECHO="$dir/echo" -+ break -+ fi -+ done - IFS="$lt_save_ifs" -- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && -- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && -- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- echo="$dir/echo" -- break -- fi -- done -- IFS="$lt_save_ifs" - -- if test "X$echo" = Xecho; then -- # We didn't find a better echo, so look for alternatives. -- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && -- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- # This shell has a builtin print -r that does the trick. -- echo='print -r' -- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && -- test "X$CONFIG_SHELL" != X/bin/ksh; then -- # If we have ksh, try running configure again with it. -- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} -- export ORIGINAL_CONFIG_SHELL -- CONFIG_SHELL=/bin/ksh -- export CONFIG_SHELL -- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} -- else -- # Try using printf. -- echo='printf %s\n' -- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && -- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- # Cool, printf works -- : -- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && -- test "X$echo_testing_string" = 'X\t' && -- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && -- test "X$echo_testing_string" = "X$echo_test_string"; then -- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL -- export CONFIG_SHELL -- SHELL="$CONFIG_SHELL" -- export SHELL -- echo="$CONFIG_SHELL $0 --fallback-echo" -- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && -- test "X$echo_testing_string" = 'X\t' && -- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && -+ if test "X$ECHO" = Xecho; then -+ # We didn't find a better echo, so look for alternatives. -+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ # This shell has a builtin print -r that does the trick. -+ ECHO='print -r' -+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && -+ test "X$CONFIG_SHELL" != X/bin/ksh; then -+ # If we have ksh, try running configure again with it. -+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} -+ export ORIGINAL_CONFIG_SHELL -+ CONFIG_SHELL=/bin/ksh -+ export CONFIG_SHELL -+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} -+ else -+ # Try using printf. -+ ECHO='printf %s\n' -+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then -- echo="$CONFIG_SHELL $0 --fallback-echo" -- else -- # maybe with a smaller string... -- prev=: -+ # Cool, printf works -+ : -+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && -+ test "X$echo_testing_string" = 'X\t' && -+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL -+ export CONFIG_SHELL -+ SHELL="$CONFIG_SHELL" -+ export SHELL -+ ECHO="$CONFIG_SHELL $0 --fallback-echo" -+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && -+ test "X$echo_testing_string" = 'X\t' && -+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ ECHO="$CONFIG_SHELL $0 --fallback-echo" -+ else -+ # maybe with a smaller string... -+ prev=: - -- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do -- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null -- then -- break -- fi -- prev="$cmd" -- done -+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do -+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null -+ then -+ break -+ fi -+ prev="$cmd" -+ done - -- if test "$prev" != 'sed 50q "$0"'; then -- echo_test_string=`eval $prev` -- export echo_test_string -- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} -- else -- # Oops. We lost completely, so just stick with echo. -- echo=echo -- fi -+ if test "$prev" != 'sed 50q "$0"'; then -+ echo_test_string=`eval $prev` -+ export echo_test_string -+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} -+ else -+ # Oops. We lost completely, so just stick with echo. -+ ECHO=echo -+ fi -+ fi - fi - fi - fi - fi --fi - - # Copy echo and quote the copy suitably for passing to libtool from - # the Makefile, instead of quoting the original, which is used later. --ECHO=$echo --if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then -- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -+lt_ECHO=$ECHO -+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then -+ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" - fi - - - - --tagnames=${tagnames+${tagnames},}CXX -- --tagnames=${tagnames+${tagnames},}F77 -+test -n "$DJDIR" || exec 7<&0 &1 - - # Name of the host. --# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, - # so uname gets run too. - ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - --exec 6>&1 -- - # - # Initializations. - # - ac_default_prefix=/usr/local -+ac_clean_files= - ac_config_libobj_dir=. -+LIBOBJS= - cross_compiling=no - subdirs= - MFLAGS= - MAKEFLAGS= --SHELL=${CONFIG_SHELL-/bin/sh} -- --# Maximum number of lines to put in a shell here document. --# This variable seems obsolete. It should probably be removed, and --# only ac_max_sed_lines should be used. --: ${ac_max_here_lines=38} - - # Identity of this package. - PACKAGE_NAME='I2O RAID Utilities' -@@ -424,51 +701,192 @@ PACKAGE_TARNAME='i2o-raid-utilities' - PACKAGE_VERSION='0.0.6' - PACKAGE_STRING='I2O RAID Utilities 0.0.6' - PACKAGE_BUGREPORT='' -+PACKAGE_URL='' - - ac_unique_file="config.h.in" - # Factoring default headers for most tests. - ac_includes_default="\ - #include --#if HAVE_SYS_TYPES_H -+#ifdef HAVE_SYS_TYPES_H - # include - #endif --#if HAVE_SYS_STAT_H -+#ifdef HAVE_SYS_STAT_H - # include - #endif --#if STDC_HEADERS -+#ifdef STDC_HEADERS - # include - # include - #else --# if HAVE_STDLIB_H -+# ifdef HAVE_STDLIB_H - # include - # endif - #endif --#if HAVE_STRING_H --# if !STDC_HEADERS && HAVE_MEMORY_H -+#ifdef HAVE_STRING_H -+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H - # include - # endif - # include - #endif --#if HAVE_STRINGS_H -+#ifdef HAVE_STRINGS_H - # include - #endif --#if HAVE_INTTYPES_H -+#ifdef HAVE_INTTYPES_H - # include --#else --# if HAVE_STDINT_H --# include --# endif - #endif --#if HAVE_UNISTD_H -+#ifdef HAVE_STDINT_H -+# include -+#endif -+#ifdef HAVE_UNISTD_H - # include - #endif" - --ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CC CFLAGS ac_ct_CC CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBOBJS LTLIBOBJS' -+ac_subst_vars='am__EXEEXT_FALSE -+am__EXEEXT_TRUE -+LTLIBOBJS -+LIBOBJS -+CXXCPP -+OTOOL64 -+OTOOL -+LIPO -+NMEDIT -+DSYMUTIL -+lt_ECHO -+RANLIB -+AR -+OBJDUMP -+LN_S -+NM -+ac_ct_DUMPBIN -+DUMPBIN -+LD -+FGREP -+EGREP -+GREP -+SED -+host_os -+host_vendor -+host_cpu -+host -+build_os -+build_vendor -+build_cpu -+build -+LIBTOOL -+CPP -+am__fastdepCC_FALSE -+am__fastdepCC_TRUE -+CCDEPMODE -+ac_ct_CC -+CFLAGS -+CC -+am__fastdepCXX_FALSE -+am__fastdepCXX_TRUE -+CXXDEPMODE -+AMDEPBACKSLASH -+AMDEP_FALSE -+AMDEP_TRUE -+am__quote -+am__include -+DEPDIR -+OBJEXT -+EXEEXT -+ac_ct_CXX -+CPPFLAGS -+LDFLAGS -+CXXFLAGS -+CXX -+am__untar -+am__tar -+AMTAR -+am__leading_dot -+SET_MAKE -+AWK -+mkdir_p -+MKDIR_P -+INSTALL_STRIP_PROGRAM -+STRIP -+install_sh -+MAKEINFO -+AUTOHEADER -+AUTOMAKE -+AUTOCONF -+ACLOCAL -+VERSION -+PACKAGE -+CYGPATH_W -+am__isrc -+INSTALL_DATA -+INSTALL_SCRIPT -+INSTALL_PROGRAM -+target_alias -+host_alias -+build_alias -+LIBS -+ECHO_T -+ECHO_N -+ECHO_C -+DEFS -+mandir -+localedir -+libdir -+psdir -+pdfdir -+dvidir -+htmldir -+infodir -+docdir -+oldincludedir -+includedir -+localstatedir -+sharedstatedir -+sysconfdir -+datadir -+datarootdir -+libexecdir -+sbindir -+bindir -+program_transform_name -+prefix -+exec_prefix -+PACKAGE_URL -+PACKAGE_BUGREPORT -+PACKAGE_STRING -+PACKAGE_VERSION -+PACKAGE_TARNAME -+PACKAGE_NAME -+PATH_SEPARATOR -+SHELL' - ac_subst_files='' -+ac_user_opts=' -+enable_option_checking -+enable_dependency_tracking -+enable_shared -+enable_static -+with_pic -+enable_fast_install -+with_gnu_ld -+enable_libtool_lock -+' -+ ac_precious_vars='build_alias -+host_alias -+target_alias -+CXX -+CXXFLAGS -+LDFLAGS -+LIBS -+CPPFLAGS -+CCC -+CC -+CFLAGS -+CPP -+CXXCPP' -+ - - # Initialize some variables set by options. - ac_init_help= - ac_init_version=false -+ac_unrecognized_opts= -+ac_unrecognized_sep= - # The variables have the same names as the options, with - # dashes changed to underlines. - cache_file=/dev/null -@@ -491,34 +909,49 @@ x_libraries=NONE - # and all the variables that are supposed to be based on exec_prefix - # by default will actually change. - # Use braces instead of parens because sh, perl, etc. also accept them. -+# (The list follows the same order as the GNU Coding Standards.) - bindir='${exec_prefix}/bin' - sbindir='${exec_prefix}/sbin' - libexecdir='${exec_prefix}/libexec' --datadir='${prefix}/share' -+datarootdir='${prefix}/share' -+datadir='${datarootdir}' - sysconfdir='${prefix}/etc' - sharedstatedir='${prefix}/com' - localstatedir='${prefix}/var' --libdir='${exec_prefix}/lib' - includedir='${prefix}/include' - oldincludedir='/usr/include' --infodir='${prefix}/info' --mandir='${prefix}/man' -+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -+infodir='${datarootdir}/info' -+htmldir='${docdir}' -+dvidir='${docdir}' -+pdfdir='${docdir}' -+psdir='${docdir}' -+libdir='${exec_prefix}/lib' -+localedir='${datarootdir}/locale' -+mandir='${datarootdir}/man' - - ac_prev= -+ac_dashdash= - for ac_option - do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then -- eval "$ac_prev=\$ac_option" -+ eval $ac_prev=\$ac_option - ac_prev= - continue - fi - -- ac_optarg=`expr "x$ac_option" : 'x[^=]*=$.*$'` -+ case $ac_option in -+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=$.*$'` ;; -+ *=) ac_optarg= ;; -+ *) ac_optarg=yes ;; -+ esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - -- case $ac_option in -+ case $ac_dashdash$ac_option in -+ --) -+ ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; -@@ -540,33 +973,59 @@ do - --config-cache | -C) - cache_file=config.cache ;; - -- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) -+ -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; -- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ -- | --da=*) -+ -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - -+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ -+ | --dataroo | --dataro | --datar) -+ ac_prev=datarootdir ;; -+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ -+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) -+ datarootdir=$ac_optarg ;; -+ - -disable-* | --disable-*) -- ac_feature=`expr "x$ac_option" : 'x-*disable-$.*$'` -+ ac_useropt=`expr "x$ac_option" : 'x-*disable-$.*$'` - # Reject names that are not valid shell variable names. -- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -- { (exit 1); exit 1; }; } -- ac_feature=`echo $ac_feature | sed 's/-/_/g'` -- eval "enable_$ac_feature=no" ;; -+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -+ as_fn_error $? "invalid feature name: $ac_useropt" -+ ac_useropt_orig=$ac_useropt -+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -+ case $ac_user_opts in -+ *" -+"enable_$ac_useropt" -+"*) ;; -+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" -+ ac_unrecognized_sep=', ';; -+ esac -+ eval enable_$ac_useropt=no ;; -+ -+ -docdir | --docdir | --docdi | --doc | --do) -+ ac_prev=docdir ;; -+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) -+ docdir=$ac_optarg ;; -+ -+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) -+ ac_prev=dvidir ;; -+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) -+ dvidir=$ac_optarg ;; - - -enable-* | --enable-*) -- ac_feature=`expr "x$ac_option" : 'x-*enable-$[^=]*$'` -+ ac_useropt=`expr "x$ac_option" : 'x-*enable-$[^=]*$'` - # Reject names that are not valid shell variable names. -- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -- { (exit 1); exit 1; }; } -- ac_feature=`echo $ac_feature | sed 's/-/_/g'` -- case $ac_option in -- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; -- *) ac_optarg=yes ;; -+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -+ as_fn_error $? "invalid feature name: $ac_useropt" -+ ac_useropt_orig=$ac_useropt -+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -+ case $ac_user_opts in -+ *" -+"enable_$ac_useropt" -+"*) ;; -+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" -+ ac_unrecognized_sep=', ';; - esac -- eval "enable_$ac_feature='$ac_optarg'" ;; -+ eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ -@@ -593,6 +1052,12 @@ do - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - -+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) -+ ac_prev=htmldir ;; -+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ -+ | --ht=*) -+ htmldir=$ac_optarg ;; -+ - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; -@@ -617,13 +1082,16 @@ do - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - -+ -localedir | --localedir | --localedi | --localed | --locale) -+ ac_prev=localedir ;; -+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) -+ localedir=$ac_optarg ;; -+ - -localstatedir | --localstatedir | --localstatedi | --localstated \ -- | --localstate | --localstat | --localsta | --localst \ -- | --locals | --local | --loca | --loc | --lo) -+ | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ -- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ -- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) -+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) -@@ -688,6 +1156,16 @@ do - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - -+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) -+ ac_prev=pdfdir ;; -+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) -+ pdfdir=$ac_optarg ;; -+ -+ -psdir | --psdir | --psdi | --psd | --ps) -+ ac_prev=psdir ;; -+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) -+ psdir=$ac_optarg ;; -+ - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; -@@ -738,26 +1216,36 @@ do - ac_init_version=: ;; - - -with-* | --with-*) -- ac_package=`expr "x$ac_option" : 'x-*with-$[^=]*$'` -+ ac_useropt=`expr "x$ac_option" : 'x-*with-$[^=]*$'` - # Reject names that are not valid shell variable names. -- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid package name: $ac_package" >&2 -- { (exit 1); exit 1; }; } -- ac_package=`echo $ac_package| sed 's/-/_/g'` -- case $ac_option in -- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; -- *) ac_optarg=yes ;; -+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -+ as_fn_error $? "invalid package name: $ac_useropt" -+ ac_useropt_orig=$ac_useropt -+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -+ case $ac_user_opts in -+ *" -+"with_$ac_useropt" -+"*) ;; -+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" -+ ac_unrecognized_sep=', ';; - esac -- eval "with_$ac_package='$ac_optarg'" ;; -+ eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) -- ac_package=`expr "x$ac_option" : 'x-*without-$.*$'` -+ ac_useropt=`expr "x$ac_option" : 'x-*without-$.*$'` - # Reject names that are not valid shell variable names. -- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid package name: $ac_package" >&2 -- { (exit 1); exit 1; }; } -- ac_package=`echo $ac_package | sed 's/-/_/g'` -- eval "with_$ac_package=no" ;; -+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && -+ as_fn_error $? "invalid package name: $ac_useropt" -+ ac_useropt_orig=$ac_useropt -+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` -+ case $ac_user_opts in -+ *" -+"with_$ac_useropt" -+"*) ;; -+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" -+ ac_unrecognized_sep=', ';; -+ esac -+ eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. -@@ -777,26 +1265,25 @@ do - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - -- -*) { echo "$as_me: error: unrecognized option: $ac_option --Try \`$0 --help' for more information." >&2 -- { (exit 1); exit 1; }; } -+ -*) as_fn_error $? "unrecognized option: \`$ac_option' -+Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x$[^=]*$='` - # Reject names that are not valid shell variable names. -- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && -- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 -- { (exit 1); exit 1; }; } -- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` -- eval "$ac_envvar='$ac_optarg'" -+ case $ac_envvar in #( -+ '' | [0-9]* | *[!_$as_cr_alnum]* ) -+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; -+ esac -+ eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. -- echo "$as_me: WARNING: you should use --build, --host, --target" >&2 -+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && -- echo "$as_me: WARNING: invalid host type: $ac_option" >&2 -+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - -@@ -805,31 +1292,36 @@ done - - if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` -- { echo "$as_me: error: missing argument to $ac_option" >&2 -- { (exit 1); exit 1; }; } -+ as_fn_error $? "missing argument to $ac_option" - fi - --# Be sure to have absolute paths. --for ac_var in exec_prefix prefix --do -- eval ac_val=$`echo $ac_var` -- case $ac_val in -- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; -- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -- { (exit 1); exit 1; }; };; -+if test -n "$ac_unrecognized_opts"; then -+ case $enable_option_checking in -+ no) ;; -+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; -+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac --done -+fi - --# Be sure to have absolute paths. --for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ -- localstatedir libdir includedir oldincludedir infodir mandir -+# Check all directory arguments for consistency. -+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ -+ datadir sysconfdir sharedstatedir localstatedir includedir \ -+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ -+ libdir localedir mandir - do -- eval ac_val=$`echo $ac_var` -+ eval ac_val=\$$ac_var -+ # Remove trailing slashes. -+ case $ac_val in -+ */ ) -+ ac_val=`expr "X$ac_val" : 'X$.*[^/]$' \| "X$ac_val" : 'X$.*$'` -+ eval $ac_var=\$ac_val;; -+ esac -+ # Be sure to have absolute directory names. - case $ac_val in -- [\\/$]* | ?:[\\/]* ) ;; -- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -- { (exit 1); exit 1; }; };; -+ [\\/$]* | ?:[\\/]* ) continue;; -+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac -+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" - done - - # There might be people who depend on the old broken behavior: `$host' -@@ -843,8 +1335,8 @@ target=$target_alias - if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe -- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. -- If a cross compiler is detected then cross compile mode will be used." >&2 -+ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. -+ If a cross compiler is detected then cross compile mode will be used" >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -@@ -856,94 +1348,72 @@ test -n "$host_alias" && ac_tool_prefix= - test "$silent" = yes && exec 6>/dev/null - - -+ac_pwd=`pwd` && test -n "$ac_pwd" && -+ac_ls_di=`ls -di .` && -+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || -+ as_fn_error $? "working directory cannot be determined" -+test "X$ac_ls_di" = "X$ac_pwd_ls_di" || -+ as_fn_error $? "pwd does not report name of working directory" -+ -+ - # Find the source files, if location was not specified. - if test -z "$srcdir"; then - ac_srcdir_defaulted=yes -- # Try the directory containing this script, then its parent. -- ac_confdir=`(dirname "$0") 2>/dev/null || --$as_expr X"$0" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -- X"$0" : 'X$//$[^/]' \| \ -- X"$0" : 'X$//$$' \| \ -- X"$0" : 'X$/$' \| \ -- . : '$.$' 2>/dev/null || --echo X"$0" | -- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X$\/\/$[^/].*/{ s//\1/; q; } -- /^X$\/\/$$/{ s//\1/; q; } -- /^X$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` -+ # Try the directory containing this script, then the parent directory. -+ ac_confdir=`$as_dirname -- "$as_myself" || -+$as_expr X"$as_myself" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -+ X"$as_myself" : 'X$//$[^/]' \| \ -+ X"$as_myself" : 'X$//$$' \| \ -+ X"$as_myself" : 'X$/$' \| . 2>/dev/null || -+$as_echo X"$as_myself" | -+ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/$.*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - srcdir=$ac_confdir -- if test ! -r $srcdir/$ac_unique_file; then -+ if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi - else - ac_srcdir_defaulted=no - fi --if test ! -r $srcdir/$ac_unique_file; then -- if test "$ac_srcdir_defaulted" = yes; then -- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 -- { (exit 1); exit 1; }; } -- else -- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -- { (exit 1); exit 1; }; } -- fi --fi --(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || -- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 -- { (exit 1); exit 1; }; } --srcdir=`echo "$srcdir" | sed 's%$[^\\/]$[\\/]*$%\1%'` --ac_env_build_alias_set=${build_alias+set} --ac_env_build_alias_value=$build_alias --ac_cv_env_build_alias_set=${build_alias+set} --ac_cv_env_build_alias_value=$build_alias --ac_env_host_alias_set=${host_alias+set} --ac_env_host_alias_value=$host_alias --ac_cv_env_host_alias_set=${host_alias+set} --ac_cv_env_host_alias_value=$host_alias --ac_env_target_alias_set=${target_alias+set} --ac_env_target_alias_value=$target_alias --ac_cv_env_target_alias_set=${target_alias+set} --ac_cv_env_target_alias_value=$target_alias --ac_env_CXX_set=${CXX+set} --ac_env_CXX_value=$CXX --ac_cv_env_CXX_set=${CXX+set} --ac_cv_env_CXX_value=$CXX --ac_env_CXXFLAGS_set=${CXXFLAGS+set} --ac_env_CXXFLAGS_value=$CXXFLAGS --ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} --ac_cv_env_CXXFLAGS_value=$CXXFLAGS --ac_env_LDFLAGS_set=${LDFLAGS+set} --ac_env_LDFLAGS_value=$LDFLAGS --ac_cv_env_LDFLAGS_set=${LDFLAGS+set} --ac_cv_env_LDFLAGS_value=$LDFLAGS --ac_env_CPPFLAGS_set=${CPPFLAGS+set} --ac_env_CPPFLAGS_value=$CPPFLAGS --ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} --ac_cv_env_CPPFLAGS_value=$CPPFLAGS --ac_env_CC_set=${CC+set} --ac_env_CC_value=$CC --ac_cv_env_CC_set=${CC+set} --ac_cv_env_CC_value=$CC --ac_env_CFLAGS_set=${CFLAGS+set} --ac_env_CFLAGS_value=$CFLAGS --ac_cv_env_CFLAGS_set=${CFLAGS+set} --ac_cv_env_CFLAGS_value=$CFLAGS --ac_env_CPP_set=${CPP+set} --ac_env_CPP_value=$CPP --ac_cv_env_CPP_set=${CPP+set} --ac_cv_env_CPP_value=$CPP --ac_env_CXXCPP_set=${CXXCPP+set} --ac_env_CXXCPP_value=$CXXCPP --ac_cv_env_CXXCPP_set=${CXXCPP+set} --ac_cv_env_CXXCPP_value=$CXXCPP --ac_env_F77_set=${F77+set} --ac_env_F77_value=$F77 --ac_cv_env_F77_set=${F77+set} --ac_cv_env_F77_value=$F77 --ac_env_FFLAGS_set=${FFLAGS+set} --ac_env_FFLAGS_value=$FFLAGS --ac_cv_env_FFLAGS_set=${FFLAGS+set} --ac_cv_env_FFLAGS_value=$FFLAGS -+if test ! -r "$srcdir/$ac_unique_file"; then -+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." -+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -+fi -+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -+ac_abs_confdir=`( -+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" -+ pwd)` -+# When building in place, set srcdir=. -+if test "$ac_abs_confdir" = "$ac_pwd"; then -+ srcdir=. -+fi -+# Remove unnecessary trailing slashes from srcdir. -+# Double slashes in file names in object file debugging info -+# mess up M-x gdb in Emacs. -+case $srcdir in -+*/) srcdir=`expr "X$srcdir" : 'X$.*[^/]$' \| "X$srcdir" : 'X$.*$'`;; -+esac -+for ac_var in $ac_precious_vars; do -+ eval ac_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_env_${ac_var}_value=\$${ac_var} -+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_cv_env_${ac_var}_value=\$${ac_var} -+done - - # - # Report the --help message. -@@ -966,20 +1436,17 @@ Configuration: - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit -- -q, --quiet, --silent do not print \`checking...' messages -+ -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - --_ACEOF -- -- cat <<_ACEOF - Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX -- [$ac_default_prefix] -+ [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX -- [PREFIX] -+ [PREFIX] - - By default, \`make install' will install all the files in - \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -@@ -989,18 +1456,26 @@ for instance \`--prefix=\$HOME'. - For better control, use the options below. - - Fine tuning of the installation directories: -- --bindir=DIR user executables [EPREFIX/bin] -- --sbindir=DIR system admin executables [EPREFIX/sbin] -- --libexecdir=DIR program executables [EPREFIX/libexec] -- --datadir=DIR read-only architecture-independent data [PREFIX/share] -- --sysconfdir=DIR read-only single-machine data [PREFIX/etc] -- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] -- --localstatedir=DIR modifiable single-machine data [PREFIX/var] -- --libdir=DIR object code libraries [EPREFIX/lib] -- --includedir=DIR C header files [PREFIX/include] -- --oldincludedir=DIR C header files for non-gcc [/usr/include] -- --infodir=DIR info documentation [PREFIX/info] -- --mandir=DIR man documentation [PREFIX/man] -+ --bindir=DIR user executables [EPREFIX/bin] -+ --sbindir=DIR system admin executables [EPREFIX/sbin] -+ --libexecdir=DIR program executables [EPREFIX/libexec] -+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] -+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] -+ --localstatedir=DIR modifiable single-machine data [PREFIX/var] -+ --libdir=DIR object code libraries [EPREFIX/lib] -+ --includedir=DIR C header files [PREFIX/include] -+ --oldincludedir=DIR C header files for non-gcc [/usr/include] -+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] -+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] -+ --infodir=DIR info documentation [DATAROOTDIR/info] -+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] -+ --mandir=DIR man documentation [DATAROOTDIR/man] -+ --docdir=DIR documentation root -+ [DATAROOTDIR/doc/i2o-raid-utilities] -+ --htmldir=DIR html documentation [DOCDIR] -+ --dvidir=DIR dvi documentation [DOCDIR] -+ --pdfdir=DIR pdf documentation [DOCDIR] -+ --psdir=DIR ps documentation [DOCDIR] - _ACEOF - - cat <<\_ACEOF -@@ -1023,14 +1498,13 @@ if test -n "$ac_init_help"; then - cat <<\_ACEOF - - Optional Features: -+ --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors -- --enable-shared[=PKGS] -- build shared libraries [default=yes] -- --enable-static[=PKGS] -- build static libraries [default=yes] -+ --enable-shared[=PKGS] build shared libraries [default=yes] -+ --enable-static[=PKGS] build static libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) -@@ -1038,144 +1512,723 @@ Optional Features: - Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) -- --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-pic try to use only PIC/non-PIC objects [default=use - both] -- --with-tags[=TAGS] -- include additional configurations [automatic] -+ --with-gnu-ld assume the C compiler uses GNU ld [default=no] - - Some influential environment variables: - CXX C++ compiler command - CXXFLAGS C++ compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory -- CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have -- headers in a nonstandard directory -+ LIBS libraries to pass to the linker, e.g. -l -+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if -+ you have headers in a nonstandard directory - CC C compiler command - CFLAGS C compiler flags - CPP C preprocessor - CXXCPP C++ preprocessor -- F77 Fortran 77 compiler command -- FFLAGS Fortran 77 compiler flags - - Use these variables to override the choices made by `configure' or to help - it to find libraries and programs with nonstandard names/locations. - -+Report bugs to the package provider. - _ACEOF -+ac_status=$? - fi - - if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. -- ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue -- test -d $ac_dir || continue -+ test -d "$ac_dir" || -+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || -+ continue - ac_builddir=. - --if test "$ac_dir" != .; then -- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) -+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix - - case $srcdir in -- .) # No --srcdir option. We are building in place. -+ .) # We are building in place. - ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac -- --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; - esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - -- cd $ac_dir -- # Check for guested configure; otherwise get Cygnus style configure. -- if test -f $ac_srcdir/configure.gnu; then -- echo -- $SHELL $ac_srcdir/configure.gnu --help=recursive -- elif test -f $ac_srcdir/configure; then -- echo -- $SHELL $ac_srcdir/configure --help=recursive -- elif test -f $ac_srcdir/configure.ac || -- test -f $ac_srcdir/configure.in; then -- echo -- $ac_configure --help -+ cd "$ac_dir" || { ac_status=$?; continue; } -+ # Check for guested configure. -+ if test -f "$ac_srcdir/configure.gnu"; then -+ echo && -+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive -+ elif test -f "$ac_srcdir/configure"; then -+ echo && -+ $SHELL "$ac_srcdir/configure" --help=recursive - else -- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -- fi -- cd $ac_popdir -+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -+ fi || ac_status=$? -+ cd "$ac_pwd" || { ac_status=$?; break; } - done - fi - --test -n "$ac_init_help" && exit 0 -+test -n "$ac_init_help" && exit $ac_status - if $ac_init_version; then - cat <<\_ACEOF - I2O RAID Utilities configure 0.0.6 --generated by GNU Autoconf 2.59 -+generated by GNU Autoconf 2.67 - --Copyright (C) 2003 Free Software Foundation, Inc. -+Copyright (C) 2010 Free Software Foundation, Inc. - This configure script is free software; the Free Software Foundation - gives unlimited permission to copy, distribute and modify it. - _ACEOF -- exit 0 -+ exit - fi --exec 5>config.log --cat >&5 <<_ACEOF -+ -+## ------------------------ ## -+## Autoconf initialization. ## -+## ------------------------ ## -+ -+# ac_fn_cxx_try_compile LINENO -+# ---------------------------- -+# Try to compile conftest.$ac_ext, and return whether this succeeded. -+ac_fn_cxx_try_compile () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ rm -f conftest.$ac_objext -+ if { { ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_compile") 2>conftest.err -+ ac_status=$? -+ if test -s conftest.err; then -+ grep -v '^ *+' conftest.err >conftest.er1 -+ cat conftest.er1 >&5 -+ mv -f conftest.er1 conftest.err -+ fi -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } && { -+ test -z "$ac_cxx_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then : -+ ac_retval=0 -+else -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_retval=1 -+fi -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ as_fn_set_status $ac_retval -+ -+} # ac_fn_cxx_try_compile -+ -+# ac_fn_c_try_compile LINENO -+# -------------------------- -+# Try to compile conftest.$ac_ext, and return whether this succeeded. -+ac_fn_c_try_compile () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ rm -f conftest.$ac_objext -+ if { { ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_compile") 2>conftest.err -+ ac_status=$? -+ if test -s conftest.err; then -+ grep -v '^ *+' conftest.err >conftest.er1 -+ cat conftest.er1 >&5 -+ mv -f conftest.er1 conftest.err -+ fi -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then : -+ ac_retval=0 -+else -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_retval=1 -+fi -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ as_fn_set_status $ac_retval -+ -+} # ac_fn_c_try_compile -+ -+# ac_fn_c_try_cpp LINENO -+# ---------------------- -+# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -+ac_fn_c_try_cpp () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ if { { ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err -+ ac_status=$? -+ if test -s conftest.err; then -+ grep -v '^ *+' conftest.err >conftest.er1 -+ cat conftest.er1 >&5 -+ mv -f conftest.er1 conftest.err -+ fi -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } > conftest.i && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then : -+ ac_retval=0 -+else -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_retval=1 -+fi -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ as_fn_set_status $ac_retval -+ -+} # ac_fn_c_try_cpp -+ -+# ac_fn_c_try_link LINENO -+# ----------------------- -+# Try to link conftest.$ac_ext, and return whether this succeeded. -+ac_fn_c_try_link () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ rm -f conftest.$ac_objext conftest$ac_exeext -+ if { { ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_link") 2>conftest.err -+ ac_status=$? -+ if test -s conftest.err; then -+ grep -v '^ *+' conftest.err >conftest.er1 -+ cat conftest.er1 >&5 -+ mv -f conftest.er1 conftest.err -+ fi -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && { -+ test "$cross_compiling" = yes || -+ $as_test_x conftest$ac_exeext -+ }; then : -+ ac_retval=0 -+else -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_retval=1 -+fi -+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information -+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would -+ # interfere with the next link command; also delete a directory that is -+ # left behind by Apple's compiler. We do this before executing the actions. -+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ as_fn_set_status $ac_retval -+ -+} # ac_fn_c_try_link -+ -+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -+# ------------------------------------------------------- -+# Tests whether HEADER exists and can be compiled using the include files in -+# INCLUDES, setting the cache variable VAR accordingly. -+ac_fn_c_check_header_compile () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -+$as_echo_n "checking for $2... " >&6; } -+if eval "test \"\${$3+set}\"" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+$4 -+#include <$2> -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ eval "$3=yes" -+else -+ eval "$3=no" -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+eval ac_res=\$$3 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -+$as_echo "$ac_res" >&6; } -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ -+} # ac_fn_c_check_header_compile -+ -+# ac_fn_c_try_run LINENO -+# ---------------------- -+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -+# that executables *can* be run. -+ac_fn_c_try_run () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ if { { ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_link") 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' -+ { { case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_try") 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; }; then : -+ ac_retval=0 -+else -+ $as_echo "$as_me: program exited with status $ac_status" >&5 -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_retval=$ac_status -+fi -+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ as_fn_set_status $ac_retval -+ -+} # ac_fn_c_try_run -+ -+# ac_fn_c_check_func LINENO FUNC VAR -+# ---------------------------------- -+# Tests whether FUNC exists, setting the cache variable VAR accordingly -+ac_fn_c_check_func () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -+$as_echo_n "checking for $2... " >&6; } -+if eval "test \"\${$3+set}\"" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+/* Define $2 to an innocuous variant, in case declares $2. -+ For example, HP-UX 11i declares gettimeofday. */ -+#define $2 innocuous_$2 -+ -+/* System header to define __stub macros and hopefully few prototypes, -+ which can conflict with char $2 (); below. -+ Prefer to if __STDC__ is defined, since -+ exists even on freestanding compilers. */ -+ -+#ifdef __STDC__ -+# include -+#else -+# include -+#endif -+ -+#undef $2 -+ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+char $2 (); -+/* The GNU C library defines this for functions which it implements -+ to always fail with ENOSYS. Some functions are actually named -+ something starting with __ and the normal name is an alias. */ -+#if defined __stub_$2 || defined __stub___$2 -+choke me -+#endif -+ -+int -+main () -+{ -+return $2 (); -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ eval "$3=yes" -+else -+ eval "$3=no" -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+fi -+eval ac_res=\$$3 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -+$as_echo "$ac_res" >&6; } -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ -+} # ac_fn_c_check_func -+ -+# ac_fn_cxx_try_cpp LINENO -+# ------------------------ -+# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -+ac_fn_cxx_try_cpp () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ if { { ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err -+ ac_status=$? -+ if test -s conftest.err; then -+ grep -v '^ *+' conftest.err >conftest.er1 -+ cat conftest.er1 >&5 -+ mv -f conftest.er1 conftest.err -+ fi -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } > conftest.i && { -+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || -+ test ! -s conftest.err -+ }; then : -+ ac_retval=0 -+else -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_retval=1 -+fi -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ as_fn_set_status $ac_retval -+ -+} # ac_fn_cxx_try_cpp -+ -+# ac_fn_cxx_try_link LINENO -+# ------------------------- -+# Try to link conftest.$ac_ext, and return whether this succeeded. -+ac_fn_cxx_try_link () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ rm -f conftest.$ac_objext conftest$ac_exeext -+ if { { ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_link") 2>conftest.err -+ ac_status=$? -+ if test -s conftest.err; then -+ grep -v '^ *+' conftest.err >conftest.er1 -+ cat conftest.er1 >&5 -+ mv -f conftest.er1 conftest.err -+ fi -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } && { -+ test -z "$ac_cxx_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && { -+ test "$cross_compiling" = yes || -+ $as_test_x conftest$ac_exeext -+ }; then : -+ ac_retval=0 -+else -+ $as_echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_retval=1 -+fi -+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information -+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would -+ # interfere with the next link command; also delete a directory that is -+ # left behind by Apple's compiler. We do this before executing the actions. -+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ as_fn_set_status $ac_retval -+ -+} # ac_fn_cxx_try_link -+ -+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -+# ------------------------------------------------------- -+# Tests whether HEADER exists, giving a warning if it cannot be compiled using -+# the include files in INCLUDES and setting the cache variable VAR -+# accordingly. -+ac_fn_c_check_header_mongrel () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ if eval "test \"\${$3+set}\"" = set; then : -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -+$as_echo_n "checking for $2... " >&6; } -+if eval "test \"\${$3+set}\"" = set; then : -+ $as_echo_n "(cached) " >&6 -+fi -+eval ac_res=\$$3 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -+$as_echo "$ac_res" >&6; } -+else -+ # Is the header compilable? -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -+$as_echo_n "checking $2 usability... " >&6; } -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+$4 -+#include <$2> -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_header_compiler=yes -+else -+ ac_header_compiler=no -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -+$as_echo "$ac_header_compiler" >&6; } -+ -+# Is the header present? -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -+$as_echo_n "checking $2 presence... " >&6; } -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include <$2> -+_ACEOF -+if ac_fn_c_try_cpp "$LINENO"; then : -+ ac_header_preproc=yes -+else -+ ac_header_preproc=no -+fi -+rm -f conftest.err conftest.i conftest.$ac_ext -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -+$as_echo "$ac_header_preproc" >&6; } -+ -+# So? What about this header? -+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( -+ yes:no: ) -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -+ ;; -+ no:yes:* ) -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -+ ;; -+esac -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -+$as_echo_n "checking for $2... " >&6; } -+if eval "test \"\${$3+set}\"" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ eval "$3=\$ac_header_compiler" -+fi -+eval ac_res=\$$3 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -+$as_echo "$ac_res" >&6; } -+fi -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ -+} # ac_fn_c_check_header_mongrel -+ -+# ac_fn_cxx_check_header_mongrel LINENO HEADER VAR INCLUDES -+# --------------------------------------------------------- -+# Tests whether HEADER exists, giving a warning if it cannot be compiled using -+# the include files in INCLUDES and setting the cache variable VAR -+# accordingly. -+ac_fn_cxx_check_header_mongrel () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ if eval "test \"\${$3+set}\"" = set; then : -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -+$as_echo_n "checking for $2... " >&6; } -+if eval "test \"\${$3+set}\"" = set; then : -+ $as_echo_n "(cached) " >&6 -+fi -+eval ac_res=\$$3 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -+$as_echo "$ac_res" >&6; } -+else -+ # Is the header compilable? -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -+$as_echo_n "checking $2 usability... " >&6; } -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+$4 -+#include <$2> -+_ACEOF -+if ac_fn_cxx_try_compile "$LINENO"; then : -+ ac_header_compiler=yes -+else -+ ac_header_compiler=no -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -+$as_echo "$ac_header_compiler" >&6; } -+ -+# Is the header present? -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -+$as_echo_n "checking $2 presence... " >&6; } -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include <$2> -+_ACEOF -+if ac_fn_cxx_try_cpp "$LINENO"; then : -+ ac_header_preproc=yes -+else -+ ac_header_preproc=no -+fi -+rm -f conftest.err conftest.i conftest.$ac_ext -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -+$as_echo "$ac_header_preproc" >&6; } -+ -+# So? What about this header? -+case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in #(( -+ yes:no: ) -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -+ ;; -+ no:yes:* ) -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -+ ;; -+esac -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -+$as_echo_n "checking for $2... " >&6; } -+if eval "test \"\${$3+set}\"" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ eval "$3=\$ac_header_compiler" -+fi -+eval ac_res=\$$3 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -+$as_echo "$ac_res" >&6; } -+fi -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ -+} # ac_fn_cxx_check_header_mongrel -+ -+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES -+# ------------------------------------------- -+# Tests whether TYPE exists after having included INCLUDES, setting cache -+# variable VAR accordingly. -+ac_fn_c_check_type () -+{ -+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -+$as_echo_n "checking for $2... " >&6; } -+if eval "test \"\${$3+set}\"" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ eval "$3=no" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+$4 -+int -+main () -+{ -+if (sizeof ($2)) -+ return 0; -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+$4 -+int -+main () -+{ -+if (sizeof (($2))) -+ return 0; -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ -+else -+ eval "$3=yes" -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+eval ac_res=\$$3 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -+$as_echo "$ac_res" >&6; } -+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -+ -+} # ac_fn_c_check_type -+cat >config.log <<_ACEOF - This file contains any messages produced by compilers while - running configure, to aid debugging if configure makes a mistake. - - It was created by I2O RAID Utilities $as_me 0.0.6, which was --generated by GNU Autoconf 2.59. Invocation command line was -+generated by GNU Autoconf 2.67. Invocation command line was - - $ $0 $@ - - _ACEOF -+exec 5>>config.log - { - cat <<_ASUNAME - ## --------- ## -@@ -1194,7 +2247,7 @@ uname -v = `(uname -v) 2>/dev/null || ec - /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` - /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` - /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` --hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` - /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` - /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` - /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -@@ -1206,8 +2259,9 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- echo "PATH: $as_dir" --done -+ $as_echo "PATH: $as_dir" -+ done -+IFS=$as_save_IFS - - } >&5 - -@@ -1229,7 +2283,6 @@ _ACEOF - ac_configure_args= - ac_configure_args0= - ac_configure_args1= --ac_sep= - ac_must_keep_next=false - for ac_pass in 1 2 - do -@@ -1240,13 +2293,13 @@ do - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; -- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?\"\']*) -- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ *\'*) -+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in -- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; -+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) -- ac_configure_args1="$ac_configure_args1 '$ac_arg'" -+ as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else -@@ -1262,104 +2315,115 @@ do - -* ) ac_must_keep_next=true ;; - esac - fi -- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" -- # Get rid of the leading space. -- ac_sep=" " -+ as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done - done --$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } --$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } -+{ ac_configure_args0=; unset ac_configure_args0;} -+{ ac_configure_args1=; unset ac_configure_args1;} - - # When interrupted or exit'd, cleanup temporary files, and complete - # config.log. We remove comments because anyway the quotes in there - # would cause problems or look ugly. --# WARNING: Be sure not to use single quotes in there, as some shells, --# such as our DU 5.0 friend, will then `close' the trap. -+# WARNING: Use '\'' to represent an apostrophe within the trap. -+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. - trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - -- cat <<\_ASBOX --## ---------------- ## -+ $as_echo "## ---------------- ## - ## Cache variables. ## --## ---------------- ## --_ASBOX -+## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, --{ -+( -+ for ac_var in `(set) 2>&1 | sed -n '\''s/^$[a-zA-Z_][a-zA-Z0-9_]*$=.*/\1/p'\''`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( -+ *) { eval $ac_var=; unset $ac_var;} ;; -+ esac ;; -+ esac -+ done - (set) 2>&1 | -- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in -- *ac_space=\ *) -+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) - sed -n \ -- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; -- s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='"'"'\\2'"'"'/p" -- ;; -+ "s/'\''/'\''\\\\'\'''\''/g; -+ s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='\''\\2'\''/p" -+ ;; #( - *) -- sed -n \ -- "s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1=\\2/p" -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; -- esac; --} -+ esac | -+ sort -+) - echo - -- cat <<\_ASBOX --## ----------------- ## -+ $as_echo "## ----------------- ## - ## Output variables. ## --## ----------------- ## --_ASBOX -+## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do -- eval ac_val=$`echo $ac_var` -- echo "$ac_var='"'"'$ac_val'"'"'" -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then -- cat <<\_ASBOX --## ------------- ## --## Output files. ## --## ------------- ## --_ASBOX -+ $as_echo "## ------------------- ## -+## File substitutions. ## -+## ------------------- ##" - echo - for ac_var in $ac_subst_files - do -- eval ac_val=$`echo $ac_var` -- echo "$ac_var='"'"'$ac_val'"'"'" -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then -- cat <<\_ASBOX --## ----------- ## -+ $as_echo "## ----------- ## - ## confdefs.h. ## --## ----------- ## --_ASBOX -+## ----------- ##" - echo -- sed "/^$/d" confdefs.h | sort -+ cat confdefs.h - echo - fi - test "$ac_signal" != 0 && -- echo "$as_me: caught signal $ac_signal" -- echo "$as_me: exit $exit_status" -+ $as_echo "$as_me: caught signal $ac_signal" -+ $as_echo "$as_me: exit $exit_status" - } >&5 -- rm -f core *.core && -- rm -rf conftest* confdefs* conf$$* $ac_clean_files && -+ rm -f core *.core core.conftest.* && -+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -- ' 0 -+' 0 - for ac_signal in 1 2 13 15; do -- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal - done - ac_signal=0 - - # confdefs.h avoids OS command line length limits that DEFS can exceed. --rm -rf conftest* confdefs.h --# AIX cpp loses on an empty file, so make sure it contains at least a newline. --echo >confdefs.h -+rm -f -r conftest* confdefs.h -+ -+$as_echo "/* confdefs.h */" > confdefs.h - - # Predefined preprocessor variables. - -@@ -1367,112 +2431,137 @@ cat >>confdefs.h <<_ACEOF - #define PACKAGE_NAME "$PACKAGE_NAME" - _ACEOF - -- - cat >>confdefs.h <<_ACEOF - #define PACKAGE_TARNAME "$PACKAGE_TARNAME" - _ACEOF - -- - cat >>confdefs.h <<_ACEOF - #define PACKAGE_VERSION "$PACKAGE_VERSION" - _ACEOF - -- - cat >>confdefs.h <<_ACEOF - #define PACKAGE_STRING "$PACKAGE_STRING" - _ACEOF - -- - cat >>confdefs.h <<_ACEOF - #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" - _ACEOF - -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_URL "$PACKAGE_URL" -+_ACEOF -+ - - # Let the site file select an alternate cache file if it wants to. --# Prefer explicitly selected file to automatically selected ones. --if test -z "$CONFIG_SITE"; then -- if test "x$prefix" != xNONE; then -- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" -- else -- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" -- fi -+# Prefer an explicitly selected file to automatically selected ones. -+ac_site_file1=NONE -+ac_site_file2=NONE -+if test -n "$CONFIG_SITE"; then -+ # We do not want a PATH search for config.site. -+ case $CONFIG_SITE in #(( -+ -*) ac_site_file1=./$CONFIG_SITE;; -+ */*) ac_site_file1=$CONFIG_SITE;; -+ *) ac_site_file1=./$CONFIG_SITE;; -+ esac -+elif test "x$prefix" != xNONE; then -+ ac_site_file1=$prefix/share/config.site -+ ac_site_file2=$prefix/etc/config.site -+else -+ ac_site_file1=$ac_default_prefix/share/config.site -+ ac_site_file2=$ac_default_prefix/etc/config.site - fi --for ac_site_file in $CONFIG_SITE; do -- if test -r "$ac_site_file"; then -- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 --echo "$as_me: loading site script $ac_site_file" >&6;} -+for ac_site_file in "$ac_site_file1" "$ac_site_file2" -+do -+ test "x$ac_site_file" = xNONE && continue -+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -+$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 -- . "$ac_site_file" -+ . "$ac_site_file" \ -+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+as_fn_error $? "failed to load site script $ac_site_file -+See \`config.log' for more details" "$LINENO" 5 ; } - fi - done - - if test -r "$cache_file"; then -- # Some versions of bash will fail to source /dev/null (special -- # files actually), so we avoid doing that. -- if test -f "$cache_file"; then -- { echo "$as_me:$LINENO: loading cache $cache_file" >&5 --echo "$as_me: loading cache $cache_file" >&6;} -+ # Some versions of bash will fail to source /dev/null (special files -+ # actually), so we avoid doing that. DJGPP emulates it as a regular file. -+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -+$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in -- [\\/]* | ?:[\\/]* ) . $cache_file;; -- *) . ./$cache_file;; -+ [\\/]* | ?:[\\/]* ) . "$cache_file";; -+ *) . "./$cache_file";; - esac - fi - else -- { echo "$as_me:$LINENO: creating cache $cache_file" >&5 --echo "$as_me: creating cache $cache_file" >&6;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -+$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file - fi - - # Check that the precious variables saved in the cache have kept the same - # value. - ac_cache_corrupted=false --for ac_var in `(set) 2>&1 | -- sed -n 's/^ac_env_$[a-zA-Z_0-9]*$_set=.*/\1/p'`; do -+for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set -- eval ac_old_val="\$ac_cv_env_${ac_var}_value" -- eval ac_new_val="\$ac_env_${ac_var}_value" -+ eval ac_old_val=\$ac_cv_env_${ac_var}_value -+ eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) -- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 --echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) -- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 --echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then -- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 --echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} -- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 --echo "$as_me: former value: $ac_old_val" >&2;} -- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 --echo "$as_me: current value: $ac_new_val" >&2;} -- ac_cache_corrupted=: -+ # differences in whitespace do not lead to failure. -+ ac_old_val_w=`echo x $ac_old_val` -+ ac_new_val_w=`echo x $ac_new_val` -+ if test "$ac_old_val_w" != "$ac_new_val_w"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} -+ ac_cache_corrupted=: -+ else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} -+ eval $ac_var=\$ac_old_val -+ fi -+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in -- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?\"\']*) -- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; -+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. -- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; -+ *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi - done - if $ac_cache_corrupted; then -- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 --echo "$as_me: error: changes in the environment can compromise the build" >&2;} -- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 --echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} -- { (exit 1); exit 1; }; } --fi -+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} -+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -+fi -+## -------------------- ## -+## Main body of script. ## -+## -------------------- ## - - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' -@@ -1482,58 +2571,39 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -+ac_config_headers="$ac_config_headers config.h" - - -+am__api_version='1.11' - -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ac_config_headers="$ac_config_headers config.h" -- --am__api_version="1.9" - ac_aux_dir= --for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do -- if test -f $ac_dir/install-sh; then -+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do -+ if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break -- elif test -f $ac_dir/install.sh; then -+ elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break -- elif test -f $ac_dir/shtool; then -+ elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi - done - if test -z "$ac_aux_dir"; then -- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 --echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} -- { (exit 1); exit 1; }; } --fi --ac_config_guess="$SHELL $ac_aux_dir/config.guess" --ac_config_sub="$SHELL $ac_aux_dir/config.sub" --ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. -+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -+fi -+ -+# These three variables are undocumented and unsupported, -+# and are intended to be withdrawn in a future Autoconf release. -+# They can cause serious problems if a builder's source tree is in a directory -+# whose full name contains unusual characters. -+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. -+ - - # Find a good install program. We prefer a C program (faster), - # so one script is as good as another. But avoid the broken or -@@ -1548,22 +2618,23 @@ ac_configure="$SHELL $ac_aux_dir/configu - # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" - # OS/2's system install, which has a completely different semantic - # ./install, which can be erroneously created by make from ./install.sh. --echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 --echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -+# Reject install programs that cannot install multiple files. -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -+$as_echo_n "checking for a BSD-compatible install... " >&6; } - if test -z "$INSTALL"; then --if test "${ac_cv_path_install+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+if test "${ac_cv_path_install+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- # Account for people who put trailing slashes in PATH elements. --case $as_dir/ in -- ./ | .// | /cC/* | \ -+ # Account for people who put trailing slashes in PATH elements. -+case $as_dir/ in #(( -+ ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ -- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ -+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. -@@ -1571,7 +2642,7 @@ case $as_dir/ in - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. -@@ -1581,30 +2652,43 @@ case $as_dir/ in - # program-specific install script used by HP pwplus--don't use. - : - else -- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -- break 3 -+ rm -rf conftest.one conftest.two conftest.dir -+ echo one > conftest.one -+ echo two > conftest.two -+ mkdir conftest.dir -+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && -+ test -s conftest.one && test -s conftest.two && -+ test -s conftest.dir/conftest.one && -+ test -s conftest.dir/conftest.two -+ then -+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -+ break 3 -+ fi - fi - fi - done - done - ;; - esac --done - -+ done -+IFS=$as_save_IFS -+ -+rm -rf conftest.one conftest.two conftest.dir - - fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else -- # As a last resort, use the slow shell script. We don't cache a -- # path for INSTALL within a source directory, because that will -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is -- # removed, or if the path is relative. -+ # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi - fi --echo "$as_me:$LINENO: result: $INSTALL" >&5 --echo "${ECHO_T}$INSTALL" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -+$as_echo "$INSTALL" >&6; } - - # Use test -z because SunOS4 sh mishandles braces in ${var-val}. - # It thinks the first close brace ends the variable substitution. -@@ -1614,21 +2698,34 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR - - test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - --echo "$as_me:$LINENO: checking whether build environment is sane" >&5 --echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -+$as_echo_n "checking whether build environment is sane... " >&6; } - # Just in case - sleep 1 - echo timestamp > conftest.file -+# Reject unsafe characters in $srcdir or the absolute working directory -+# name. Accept space and tab only in the latter. -+am_lf=' -+' -+case `pwd` in -+ *[\\\"\#\$\&\'\`$am_lf]*) -+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;; -+esac -+case $srcdir in -+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*) -+ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;; -+esac -+ - # Do `set' in a subshell so we don't clobber the current shell's - # arguments. Must try -L first in case configure is actually a - # symlink; some systems play weird games with the mod time of symlinks - # (eg FreeBSD returns the mod time of the symlink's containing - # directory). - if ( -- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` -+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. -- set X `ls -t $srcdir/configure conftest.file` -+ set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ -@@ -1638,11 +2735,8 @@ if ( - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". -- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken --alias in your environment" >&5 --echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken --alias in your environment" >&2;} -- { (exit 1); exit 1; }; } -+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -+alias in your environment" "$LINENO" 5 - fi - - test "$2" = conftest.file -@@ -1651,139 +2745,268 @@ then - # Ok. - : - else -- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! --Check your system clock" >&5 --echo "$as_me: error: newly created file is older than distributed files! --Check your system clock" >&2;} -- { (exit 1); exit 1; }; } -+ as_fn_error $? "newly created file is older than distributed files! -+Check your system clock" "$LINENO" 5 - fi --echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -+$as_echo "yes" >&6; } - test "$program_prefix" != NONE && -- program_transform_name="s,^,$program_prefix,;$program_transform_name" -+ program_transform_name="s&^&$program_prefix&;$program_transform_name" - # Use a double $ so make ignores it. - test "$program_suffix" != NONE && -- program_transform_name="s,\$,$program_suffix,;$program_transform_name" --# Double any \ or $. echo might interpret backslashes. -+ program_transform_name="s&\$&$program_suffix&;$program_transform_name" -+# Double any \ or $. - # By default was `s,x,x', remove it if useless. --cat <<\_ACEOF >conftest.sed --s/[\\$]/&&/g;s/;s,x,x,$// --_ACEOF --program_transform_name=`echo $program_transform_name | sed -f conftest.sed` --rm conftest.sed -+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - - # expand $ac_aux_dir to an absolute path - am_aux_dir=`cd $ac_aux_dir && pwd` - --test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -+if test x"${MISSING+set}" != xset; then -+ case $am_aux_dir in -+ *\ * | *\ *) -+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; -+ *) -+ MISSING="\${SHELL} $am_aux_dir/missing" ;; -+ esac -+fi - # Use eval to expand $SHELL - if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " - else - am_missing_run= -- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 --echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} - fi - --if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then -- # We used to keeping the `.' as first argument, in order to -- # allow $(mkdir_p) to be used without argument. As in -- # $(mkdir_p) $(somedir) -- # where $(somedir) is conditionally defined. However this is wrong -- # for two reasons: -- # 1. if the package is installed by a user who cannot write `.' -- # make install will fail, -- # 2. the above comment should most certainly read -- # $(mkdir_p) $(DESTDIR)$(somedir) -- # so it does not work when $(somedir) is undefined and -- # $(DESTDIR) is not. -- # To support the latter case, we have to write -- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), -- # so the `.' trick is pointless. -- mkdir_p='mkdir -p --' --else -- # On NextStep and OpenStep, the `mkdir' command does not -- # recognize any option. It will interpret all options as -- # directories to create, and then abort because `.' already -- # exists. -- for d in ./-p ./--version; -- do -- test -d $d && rmdir $d -- done -- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. -- if test -f "$ac_aux_dir/mkinstalldirs"; then -- mkdir_p='$(mkinstalldirs)' -- else -- mkdir_p='$(install_sh) -d' -- fi -+if test x"${install_sh}" != xset; then -+ case $am_aux_dir in -+ *\ * | *\ *) -+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; -+ *) -+ install_sh="\${SHELL} $am_aux_dir/install-sh" -+ esac - fi - --for ac_prog in gawk mawk nawk awk --do -- # Extract the first word of "$ac_prog", so it can be a program name with args. --set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_AWK+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+# Installed binaries are usually stripped using `strip' when the user -+# run `make install-strip'. However `strip' might not be the right -+# tool to use in cross-compilation environments, therefore Automake -+# will honor the `STRIP' environment variable to overrule this program. -+if test "$cross_compiling" != no; then -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -+set dummy ${ac_tool_prefix}strip; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_STRIP+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- if test -n "$AWK"; then -- ac_cv_prog_AWK="$AWK" # Let the user override the test. -+ if test -n "$STRIP"; then -+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. - else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_AWK="$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_STRIP="${ac_tool_prefix}strip" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+STRIP=$ac_cv_prog_STRIP -+if test -n "$STRIP"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -+$as_echo "$STRIP" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi -+ -+ -+fi -+if test -z "$ac_cv_prog_STRIP"; then -+ ac_ct_STRIP=$STRIP -+ # Extract the first word of "strip", so it can be a program name with args. -+set dummy strip; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$ac_ct_STRIP"; then -+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_STRIP="strip" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -+if test -n "$ac_ct_STRIP"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -+$as_echo "$ac_ct_STRIP" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi -+ -+ if test "x$ac_ct_STRIP" = x; then -+ STRIP=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ STRIP=$ac_ct_STRIP -+ fi -+else -+ STRIP="$ac_cv_prog_STRIP" -+fi -+ -+fi -+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -+if test -z "$MKDIR_P"; then -+ if test "${ac_cv_path_mkdir+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in mkdir gmkdir; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue -+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( -+ 'mkdir (GNU coreutils) '* | \ -+ 'mkdir (coreutils) '* | \ -+ 'mkdir (fileutils) '4.1*) -+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext -+ break 3;; -+ esac -+ done -+ done -+ done -+IFS=$as_save_IFS -+ -+fi -+ -+ test -d ./--version && rmdir ./--version -+ if test "${ac_cv_path_mkdir+set}" = set; then -+ MKDIR_P="$ac_cv_path_mkdir -p" -+ else -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for MKDIR_P within a source directory, because that will -+ # break other packages using the cache if that directory is -+ # removed, or if the value is a relative name. -+ MKDIR_P="$ac_install_sh -d" -+ fi -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -+$as_echo "$MKDIR_P" >&6; } -+ -+mkdir_p="$MKDIR_P" -+case $mkdir_p in -+ [\\/$]* | ?:[\\/]*) ;; -+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -+esac -+ -+for ac_prog in gawk mawk nawk awk -+do -+ # Extract the first word of "$ac_prog", so it can be a program name with args. -+set dummy $ac_prog; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_AWK+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$AWK"; then -+ ac_cv_prog_AWK="$AWK" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_AWK="$ac_prog" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS - - fi - fi - AWK=$ac_cv_prog_AWK - if test -n "$AWK"; then -- echo "$as_me:$LINENO: result: $AWK" >&5 --echo "${ECHO_T}$AWK" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -+$as_echo "$AWK" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - test -n "$AWK" && break - done - --echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 --echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 --set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` --if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -+set x ${MAKE-make} -+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then : -+ $as_echo_n "(cached) " >&6 - else - cat >conftest.make <<\_ACEOF -+SHELL = /bin/sh - all: -- @echo 'ac_maketemp="$(MAKE)"' -+ @echo '@@@%%%=$(MAKE)=@@@%%%' - _ACEOF --# GNU make sometimes prints "make[1]: Entering...", which would confuse us. --eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` --if test -n "$ac_maketemp"; then -- eval ac_cv_prog_make_${ac_make}_set=yes --else -- eval ac_cv_prog_make_${ac_make}_set=no --fi -+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -+case `${MAKE-make} -f conftest.make 2>/dev/null` in -+ *@@@%%%=?*=@@@%%%*) -+ eval ac_cv_prog_make_${ac_make}_set=yes;; -+ *) -+ eval ac_cv_prog_make_${ac_make}_set=no;; -+esac - rm -f conftest.make - fi --if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -+$as_echo "yes" >&6; } - SET_MAKE= - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" - fi - -@@ -1796,12 +3019,14 @@ else - fi - rmdir .tst 2>/dev/null - --# test to see if srcdir already configured --if test "`cd $srcdir && pwd`" != "`pwd`" && -- test -f $srcdir/config.status; then -- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 --echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} -- { (exit 1); exit 1; }; } -+if test "`cd $srcdir && pwd`" != "`pwd`"; then -+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output -+ # is not polluted with repeated "-I." -+ am__isrc=' -I$(srcdir)' -+ # test to see if srcdir already configured -+ if test -f $srcdir/config.status; then -+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 -+ fi - fi - - # test whether we have cygpath -@@ -1844,96 +3069,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru - - MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - --install_sh=${install_sh-"$am_aux_dir/install-sh"} -- --# Installed binaries are usually stripped using `strip' when the user --# run `make install-strip'. However `strip' might not be the right --# tool to use in cross-compilation environments, therefore Automake --# will honor the `STRIP' environment variable to overrule this program. --if test "$cross_compiling" != no; then -- if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. --set dummy ${ac_tool_prefix}strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_STRIP+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$STRIP"; then -- ac_cv_prog_STRIP="$STRIP" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_STRIP="${ac_tool_prefix}strip" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- --fi --fi --STRIP=$ac_cv_prog_STRIP --if test -n "$STRIP"; then -- echo "$as_me:$LINENO: result: $STRIP" >&5 --echo "${ECHO_T}$STRIP" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- --fi --if test -z "$ac_cv_prog_STRIP"; then -- ac_ct_STRIP=$STRIP -- # Extract the first word of "strip", so it can be a program name with args. --set dummy strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$ac_ct_STRIP"; then -- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_STRIP="strip" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- -- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" --fi --fi --ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP --if test -n "$ac_ct_STRIP"; then -- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 --echo "${ECHO_T}$ac_ct_STRIP" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- -- STRIP=$ac_ct_STRIP --else -- STRIP="$ac_cv_prog_STRIP" --fi -- --fi --INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -- - # We need awk for the "check" target. The system "awk" is bad on - # some platforms. - # Always define AMTAR for backward compatibility. -@@ -1948,20 +3083,24 @@ am__tar='${AMTAR} chof - "$$tardir"'; am - - - # Checks for programs. --ac_ext=cc -+ac_ext=cpp - ac_cpp='$CXXCPP $CPPFLAGS' - ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' - ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' - ac_compiler_gnu=$ac_cv_cxx_compiler_gnu --if test -n "$ac_tool_prefix"; then -- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC -+if test -z "$CXX"; then -+ if test -n "$CCC"; then -+ CXX=$CCC -+ else -+ if test -n "$ac_tool_prefix"; then -+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_CXX+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_CXX+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -@@ -1971,39 +3110,41 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS - - fi - fi - CXX=$ac_cv_prog_CXX - if test -n "$CXX"; then -- echo "$as_me:$LINENO: result: $CXX" >&5 --echo "${ECHO_T}$CXX" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 -+$as_echo "$CXX" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - test -n "$CXX" && break - done - fi - if test -z "$CXX"; then - ac_ct_CXX=$CXX -- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC -+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. -@@ -2013,59 +3154,72 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CXX="$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS - - fi - fi - ac_ct_CXX=$ac_cv_prog_ac_ct_CXX - if test -n "$ac_ct_CXX"; then -- echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 --echo "${ECHO_T}$ac_ct_CXX" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 -+$as_echo "$ac_ct_CXX" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - test -n "$ac_ct_CXX" && break - done --test -n "$ac_ct_CXX" || ac_ct_CXX="g++" - -- CXX=$ac_ct_CXX -+ if test "x$ac_ct_CXX" = x; then -+ CXX="g++" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ CXX=$ac_ct_CXX -+ fi - fi - -- -+ fi -+fi - # Provide some information about the compiler. --echo "$as_me:$LINENO:" \ -- "checking for C++ compiler version" >&5 --ac_compiler=`set X $ac_compile; echo $2` --{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 -- (eval $ac_compiler --version &5) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 -- (eval $ac_compiler -v &5) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 -- (eval $ac_compiler -V &5) 2>&5 -+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 -+set X $ac_compile -+ac_compiler=$2 -+for ac_option in --version -v -V -qversion; do -+ { { ac_try="$ac_compiler $ac_option >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } -+ if test -s conftest.err; then -+ sed '10a\ -+... rest of stderr output deleted ... -+ 10q' conftest.err >conftest.er1 -+ cat conftest.er1 >&5 -+ fi -+ rm -f conftest.er1 conftest.err -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } -+done - --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -2077,112 +3231,108 @@ main () - } - _ACEOF - ac_clean_files_save=$ac_clean_files --ac_clean_files="$ac_clean_files a.out a.exe b.out" -+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" - # Try to create an executable without -o first, disregard a.out. - # It will help us diagnose broken compilers, and finding out an intuition - # of exeext. --echo "$as_me:$LINENO: checking for C++ compiler default output file name" >&5 --echo $ECHO_N "checking for C++ compiler default output file name... $ECHO_C" >&6 --ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` --if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 -- (eval $ac_link_default) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- # Find the output, starting from the most likely. This scheme is --# not robust to junk in `.', hence go to wildcards (a.*) only as a last --# resort. -- --# Be careful to initialize this variable, since it used to be cached. --# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. --ac_cv_exeext= --# b.out is created by i960 compilers. --for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C++ compiler works" >&5 -+$as_echo_n "checking whether the C++ compiler works... " >&6; } -+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -+ -+# The possible output files: -+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" -+ -+ac_rmfiles= -+for ac_file in $ac_files -+do -+ case $ac_file in -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; -+ * ) ac_rmfiles="$ac_rmfiles $ac_file";; -+ esac -+done -+rm -f $ac_rmfiles -+ -+if { { ac_try="$ac_link_default" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_link_default") 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; then : -+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -+# in a Makefile. We should not override ac_cv_exeext if it was cached, -+# so that the user can short-circuit this test for compilers unknown to -+# Autoconf. -+for ac_file in $ac_files '' - do - test -f "$ac_file" || continue - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) -- ;; -- conftest.$ac_ext ) -- # This is the source file. -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) -- ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'` -- # FIXME: I believe we export ac_cv_exeext for Libtool, -- # but it would be cool to find out if it's true. Does anybody -- # maintain Libtool? --akim. -- export ac_cv_exeext -+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; -+ then :; else -+ ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'` -+ fi -+ # We set ac_cv_exeext here because the later test for it is not -+ # safe: cross compilers may not add the suffix if given an `-o' -+ # argument, so we may need to know it at that point already. -+ # Even if this section looks crufty: it has the advantage of -+ # actually working. - break;; - * ) - break;; - esac - done -+test "$ac_cv_exeext" = no && ac_cv_exeext= -+ - else -- echo "$as_me: failed program was:" >&5 -+ ac_file='' -+fi -+if test -z "$ac_file"; then : -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+$as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables --See \`config.log' for more details." >&5 --echo "$as_me: error: C++ compiler cannot create executables --See \`config.log' for more details." >&2;} -- { (exit 77); exit 77; }; } -+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+as_fn_error 77 "C++ compiler cannot create executables -+See \`config.log' for more details" "$LINENO" 5 ; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -+$as_echo "yes" >&6; } - fi -- -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler default output file name" >&5 -+$as_echo_n "checking for C++ compiler default output file name... " >&6; } -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -+$as_echo "$ac_file" >&6; } - ac_exeext=$ac_cv_exeext --echo "$as_me:$LINENO: result: $ac_file" >&5 --echo "${ECHO_T}$ac_file" >&6 -- --# Check the compiler produces executables we can run. If not, either --# the compiler is broken, or we cross compile. --echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5 --echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6 --# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 --# If not cross compiling, check that we can run a simple program. --if test "$cross_compiling" != yes; then -- if { ac_try='./$ac_file' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- cross_compiling=no -- else -- if test "$cross_compiling" = maybe; then -- cross_compiling=yes -- else -- { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs. --If you meant to cross compile, use \`--host'. --See \`config.log' for more details." >&5 --echo "$as_me: error: cannot run C++ compiled programs. --If you meant to cross compile, use \`--host'. --See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -- fi -- fi --fi --echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 - --rm -f a.out a.exe conftest$ac_cv_exeext b.out -+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out - ac_clean_files=$ac_clean_files_save --# Check the compiler produces executables we can run. If not, either --# the compiler is broken, or we cross compile. --echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 --echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 --echo "$as_me:$LINENO: result: $cross_compiling" >&5 --echo "${ECHO_T}$cross_compiling" >&6 -- --echo "$as_me:$LINENO: checking for suffix of executables" >&5 --echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -+$as_echo_n "checking for suffix of executables... " >&6; } -+if { { ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_link") 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) - # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will - # work properly (i.e., refer to `conftest.exe'), while it won't with -@@ -2190,38 +3340,90 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l - for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'` -- export ac_cv_exeext - break;; - * ) break;; - esac - done - else -- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link --See \`config.log' for more details." >&5 --echo "$as_me: error: cannot compute suffix of executables: cannot compile and link --See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } --fi -- --rm -f conftest$ac_cv_exeext --echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 --echo "${ECHO_T}$ac_cv_exeext" >&6 -+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+as_fn_error $? "cannot compute suffix of executables: cannot compile and link -+See \`config.log' for more details" "$LINENO" 5 ; } -+fi -+rm -f conftest conftest$ac_cv_exeext -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -+$as_echo "$ac_cv_exeext" >&6; } - - rm -f conftest.$ac_ext - EXEEXT=$ac_cv_exeext - ac_exeext=$EXEEXT --echo "$as_me:$LINENO: checking for suffix of object files" >&5 --echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 --if test "${ac_cv_objext+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include -+int -+main () -+{ -+FILE *f = fopen ("conftest.out", "w"); -+ return ferror (f) || fclose (f) != 0; -+ -+ ; -+ return 0; -+} - _ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ac_clean_files="$ac_clean_files conftest.out" -+# Check that the compiler produces executables we can run. If not, either -+# the compiler is broken, or we cross compile. -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -+$as_echo_n "checking whether we are cross compiling... " >&6; } -+if test "$cross_compiling" != yes; then -+ { { ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_link") 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } -+ if { ac_try='./conftest$ac_cv_exeext' -+ { { case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_try") 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; }; then -+ cross_compiling=no -+ else -+ if test "$cross_compiling" = maybe; then -+ cross_compiling=yes -+ else -+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+as_fn_error $? "cannot run C++ compiled programs. -+If you meant to cross compile, use \`--host'. -+See \`config.log' for more details" "$LINENO" 5 ; } -+ fi -+ fi -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -+$as_echo "$cross_compiling" >&6; } -+ -+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -+ac_clean_files=$ac_clean_files_save -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -+$as_echo_n "checking for suffix of object files... " >&6; } -+if test "${ac_cv_objext+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -2233,45 +3435,46 @@ main () - } - _ACEOF - rm -f conftest.o conftest.obj --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do -+if { { ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_compile") 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; then : -+ for ac_file in conftest.o conftest.obj conftest.*; do -+ test -f "$ac_file" || continue; - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.$.*$'` - break;; - esac - done - else -- echo "$as_me: failed program was:" >&5 -+ $as_echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile --See \`config.log' for more details." >&5 --echo "$as_me: error: cannot compute suffix of object files: cannot compile --See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+as_fn_error $? "cannot compute suffix of object files: cannot compile -+See \`config.log' for more details" "$LINENO" 5 ; } - fi -- - rm -f conftest.$ac_cv_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 --echo "${ECHO_T}$ac_cv_objext" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -+$as_echo "$ac_cv_objext" >&6; } - OBJEXT=$ac_cv_objext - ac_objext=$OBJEXT --echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 --echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 --if test "${ac_cv_cxx_compiler_gnu+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 -+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } -+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -2285,55 +3488,34 @@ main () - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+if ac_fn_cxx_try_compile "$LINENO"; then : - ac_compiler_gnu=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --ac_compiler_gnu=no -+ ac_compiler_gnu=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_cxx_compiler_gnu=$ac_compiler_gnu - - fi --echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 --echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 --GXX=`test $ac_compiler_gnu = yes && echo yes` -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 -+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } -+if test $ac_compiler_gnu = yes; then -+ GXX=yes -+else -+ GXX= -+fi - ac_test_CXXFLAGS=${CXXFLAGS+set} - ac_save_CXXFLAGS=$CXXFLAGS --CXXFLAGS="-g" --echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 --echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 --if test "${ac_cv_prog_cxx_g+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 -+$as_echo_n "checking whether $CXX accepts -g... " >&6; } -+if test "${ac_cv_prog_cxx_g+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag -+ ac_cxx_werror_flag=yes -+ ac_cv_prog_cxx_g=no -+ CXXFLAGS="-g" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -2344,160 +3526,64 @@ main () - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+if ac_fn_cxx_try_compile "$LINENO"; then : - ac_cv_prog_cxx_g=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --ac_cv_prog_cxx_g=no --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 --echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 --if test "$ac_test_CXXFLAGS" = set; then -- CXXFLAGS=$ac_save_CXXFLAGS --elif test $ac_cv_prog_cxx_g = yes; then -- if test "$GXX" = yes; then -- CXXFLAGS="-g -O2" -- else -- CXXFLAGS="-g" -- fi --else -- if test "$GXX" = yes; then -- CXXFLAGS="-O2" -- else -- CXXFLAGS= -- fi --fi --for ac_declaration in \ -- '' \ -- 'extern "C" void std::exit (int) throw (); using std::exit;' \ -- 'extern "C" void std::exit (int); using std::exit;' \ -- 'extern "C" void exit (int) throw ();' \ -- 'extern "C" void exit (int);' \ -- 'void exit (int);' --do -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ CXXFLAGS="" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --$ac_declaration --#include -+ - int - main () - { --exit (42); -+ - ; - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- : --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+if ac_fn_cxx_try_compile "$LINENO"; then : - --continue --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+else -+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag -+ CXXFLAGS="-g" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --$ac_declaration -+ - int - main () - { --exit (42); -+ - ; - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- break --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- -+if ac_fn_cxx_try_compile "$LINENO"; then : -+ ac_cv_prog_cxx_g=yes - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --done --rm -f conftest* --if test -n "$ac_declaration"; then -- echo '#ifdef __cplusplus' >>confdefs.h -- echo $ac_declaration >>confdefs.h -- echo '#endif' >>confdefs.h -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 -+$as_echo "$ac_cv_prog_cxx_g" >&6; } -+if test "$ac_test_CXXFLAGS" = set; then -+ CXXFLAGS=$ac_save_CXXFLAGS -+elif test $ac_cv_prog_cxx_g = yes; then -+ if test "$GXX" = yes; then -+ CXXFLAGS="-g -O2" -+ else -+ CXXFLAGS="-g" -+ fi -+else -+ if test "$GXX" = yes; then -+ CXXFLAGS="-O2" -+ else -+ CXXFLAGS= -+ fi - fi -- - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' - ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -@@ -2505,60 +3591,58 @@ ac_link='$CC -o conftest$ac_exeext $CFLA - ac_compiler_gnu=$ac_cv_c_compiler_gnu - DEPDIR="${am__leading_dot}deps" - -- ac_config_commands="$ac_config_commands depfiles" -+ac_config_commands="$ac_config_commands depfiles" - - - am_make=${MAKE-make} - cat > confinc << 'END' - am__doit: -- @echo done -+ @echo this is the am__doit target - .PHONY: am__doit - END - # If we don't find an include directive, just comment out the code. --echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 --echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -+$as_echo_n "checking for style of include used by $am_make... " >&6; } - am__include="#" - am__quote= - _am_result=none - # First try GNU make style include. - echo "include confinc" > confmf --# We grep out `Entering directory' and `Leaving directory' --# messages which can occur if `w' ends up in MAKEFLAGS. --# In particular we don't look at `^make:' because GNU make might --# be invoked under some other name (usually "gmake"), in which --# case it prints its new name instead of `make'. --if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then -- am__include=include -- am__quote= -- _am_result=GNU --fi -+# Ignore all kinds of additional output from `make'. -+case `$am_make -s -f confmf 2> /dev/null` in #( -+*the\ am__doit\ target*) -+ am__include=include -+ am__quote= -+ _am_result=GNU -+ ;; -+esac - # Now try BSD make style include. - if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf -- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then -- am__include=.include -- am__quote="\"" -- _am_result=BSD -- fi -+ case `$am_make -s -f confmf 2> /dev/null` in #( -+ *the\ am__doit\ target*) -+ am__include=.include -+ am__quote="\"" -+ _am_result=BSD -+ ;; -+ esac - fi - - --echo "$as_me:$LINENO: result: $_am_result" >&5 --echo "${ECHO_T}$_am_result" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -+$as_echo "$_am_result" >&6; } - rm -f confinc confmf - --# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. --if test "${enable_dependency_tracking+set}" = set; then -- enableval="$enable_dependency_tracking" -+# Check whether --enable-dependency-tracking was given. -+if test "${enable_dependency_tracking+set}" = set; then : -+ enableval=$enable_dependency_tracking; -+fi - --fi; - if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - fi -- -- --if test "x$enable_dependency_tracking" != xno; then -+ if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' - else -@@ -2568,13 +3652,12 @@ fi - - - -- - depcc="$CXX" am_compiler_list= - --echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 --echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 --if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -+$as_echo_n "checking dependency style of $depcc... " >&6; } -+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up -@@ -2599,6 +3682,11 @@ else - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*$[a-zA-Z0-9]*$)$/\1/p' < ./depcomp` - fi -+ am__universal=false -+ case " $depcc " in #( -+ *\ -arch\ *\ -arch\ *) am__universal=true ;; -+ esac -+ - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and -@@ -2616,7 +3704,17 @@ else - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - -+ # We check with `-c' and `-o' for the sake of the "dashmstdout" -+ # mode. It turns out that the SunPro C++ compiler does not properly -+ # handle `-M -o', and we need to detect this. Also, some Intel -+ # versions had trouble with output in subdirs -+ am__obj=sub/conftest.${OBJEXT-o} -+ am__minus_obj="-o $am__obj" - case $depmode in -+ gcc) -+ # This depmode causes a compiler race in universal mode. -+ test "$am__universal" = false || continue -+ ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested -@@ -2626,18 +3724,23 @@ else - break - fi - ;; -+ msvisualcpp | msvcmsys) -+ # This compiler won't grok `-c -o', but also, the minuso test has -+ # not run yet. These depmodes are late enough in the game, and -+ # so weak that their functioning should not be impacted. -+ am__obj=conftest.${OBJEXT-o} -+ am__minus_obj= -+ ;; - none) break ;; - esac -- # We check with `-c' and `-o' for the sake of the "dashmstdout" -- # mode. It turns out that the SunPro C++ compiler does not properly -- # handle `-M -o', and we need to detect this. - if depmode=$depmode \ -- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ -+ source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ -- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ -+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && -+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && -- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && -+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message -@@ -2661,13 +3764,11 @@ else - fi - - fi --echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 --echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 -+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } - CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type - -- -- --if -+ if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then - am__fastdepCXX_TRUE= -@@ -2686,10 +3787,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. - set dummy ${ac_tool_prefix}gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -2699,35 +3800,37 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -+$as_echo "$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. - set dummy gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -@@ -2737,39 +3840,50 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS - - fi - fi - ac_ct_CC=$ac_cv_prog_ac_ct_CC - if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -+$as_echo "$ac_ct_CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - -- CC=$ac_ct_CC -+ if test "x$ac_ct_CC" = x; then -+ CC="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ CC=$ac_ct_CC -+ fi - else - CC="$ac_cv_prog_CC" - fi - - if test -z "$CC"; then -- if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. - set dummy ${ac_tool_prefix}cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -2779,77 +3893,37 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- --fi --if test -z "$ac_cv_prog_CC"; then -- ac_ct_CC=$CC -- # Extract the first word of "cc", so it can be a program name with args. --set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$ac_ct_CC"; then -- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_CC="cc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- --fi --fi --ac_ct_CC=$ac_cv_prog_ac_ct_CC --if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -+$as_echo "$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - -- CC=$ac_ct_CC --else -- CC="$ac_cv_prog_CC" --fi - -+ fi - fi - if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. - set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -2860,18 +3934,19 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS - - if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. -@@ -2889,24 +3964,25 @@ fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -+$as_echo "$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - fi - if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then -- for ac_prog in cl -+ for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -@@ -2916,39 +3992,41 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -+$as_echo "$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - test -n "$CC" && break - done - fi - if test -z "$CC"; then - ac_ct_CC=$CC -- for ac_prog in cl -+ for ac_prog in cl.exe - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -@@ -2958,71 +4036,83 @@ for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS - - fi - fi - ac_ct_CC=$ac_cv_prog_ac_ct_CC - if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -+$as_echo "$ac_ct_CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - -+ - test -n "$ac_ct_CC" && break - done - -- CC=$ac_ct_CC -+ if test "x$ac_ct_CC" = x; then -+ CC="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ CC=$ac_ct_CC -+ fi - fi - - fi - - --test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH --See \`config.log' for more details." >&5 --echo "$as_me: error: no acceptable C compiler found in \$PATH --See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+as_fn_error $? "no acceptable C compiler found in \$PATH -+See \`config.log' for more details" "$LINENO" 5 ; } - - # Provide some information about the compiler. --echo "$as_me:$LINENO:" \ -- "checking for C compiler version" >&5 --ac_compiler=`set X $ac_compile; echo $2` --{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 -- (eval $ac_compiler --version &5) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 -- (eval $ac_compiler -v &5) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 -- (eval $ac_compiler -V &5) 2>&5 -+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -+set X $ac_compile -+ac_compiler=$2 -+for ac_option in --version -v -V -qversion; do -+ { { ac_try="$ac_compiler $ac_option >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } -- --echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 --echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 --if test "${ac_cv_c_compiler_gnu+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ if test -s conftest.err; then -+ sed '10a\ -+... rest of stderr output deleted ... -+ 10q' conftest.err >conftest.er1 -+ cat conftest.er1 >&5 -+ fi -+ rm -f conftest.er1 conftest.err -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } -+done -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -+if test "${ac_cv_c_compiler_gnu+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -3036,55 +4126,34 @@ main () - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --ac_compiler_gnu=no -+ ac_compiler_gnu=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_c_compiler_gnu=$ac_compiler_gnu - - fi --echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 --echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 --GCC=`test $ac_compiler_gnu = yes && echo yes` -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -+$as_echo "$ac_cv_c_compiler_gnu" >&6; } -+if test $ac_compiler_gnu = yes; then -+ GCC=yes -+else -+ GCC= -+fi - ac_test_CFLAGS=${CFLAGS+set} - ac_save_CFLAGS=$CFLAGS --CFLAGS="-g" --echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 --echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 --if test "${ac_cv_prog_cc_g+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -+$as_echo_n "checking whether $CC accepts -g... " >&6; } -+if test "${ac_cv_prog_cc_g+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_save_c_werror_flag=$ac_c_werror_flag -+ ac_c_werror_flag=yes -+ ac_cv_prog_cc_g=no -+ CFLAGS="-g" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -3095,39 +4164,49 @@ main () - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ CFLAGS="" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ -+else -+ ac_c_werror_flag=$ac_save_c_werror_flag -+ CFLAGS="-g" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+ -+int -+main () -+{ - --ac_cv_prog_cc_g=no -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_prog_cc_g=yes -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+ ac_c_werror_flag=$ac_save_c_werror_flag - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -+$as_echo "$ac_cv_prog_cc_g" >&6; } - if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS - elif test $ac_cv_prog_cc_g = yes; then -@@ -3143,18 +4222,14 @@ else - CFLAGS= - fi - fi --echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 --echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 --if test "${ac_cv_prog_cc_stdc+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -+if test "${ac_cv_prog_cc_c89+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- ac_cv_prog_cc_stdc=no -+ ac_cv_prog_cc_c89=no - ac_save_CC=$CC --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - #include - #include -@@ -3182,12 +4257,17 @@ static char *f (char * (*g) (char **, in - /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated -- as 'x'. The following induces an error, until -std1 is added to get -+ as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something -- that's true only with -std1. */ -+ that's true only with -std. */ - int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters -+ inside strings and character constants. */ -+#define FOO(x) 'x' -+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; -+ - int test (int i, double x); - struct s1 {int (*f) (int a);}; - struct s2 {int (*f) (double a);}; -@@ -3202,205 +4282,37 @@ return f (e, argv, 0) != argv[0] || f - return 0; - } - _ACEOF --# Don't try gcc -ansi; that turns off useful extensions and --# breaks some systems' header files. --# AIX -qlanglvl=ansi --# Ultrix and OSF/1 -std1 --# HP-UX 10.20 and later -Ae --# HP-UX older versions -Aa -D_HPUX_SOURCE --# SVR4 -Xc -D__EXTENSIONS__ --for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" - do - CC="$ac_save_CC $ac_arg" -- rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_prog_cc_stdc=$ac_arg --break --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- -+ if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_prog_cc_c89=$ac_arg - fi --rm -f conftest.err conftest.$ac_objext -+rm -f core conftest.err conftest.$ac_objext -+ test "x$ac_cv_prog_cc_c89" != "xno" && break - done --rm -f conftest.$ac_ext conftest.$ac_objext -+rm -f conftest.$ac_ext - CC=$ac_save_CC - - fi -- --case "x$ac_cv_prog_cc_stdc" in -- x|xno) -- echo "$as_me:$LINENO: result: none needed" >&5 --echo "${ECHO_T}none needed" >&6 ;; -+# AC_CACHE_VAL -+case "x$ac_cv_prog_cc_c89" in -+ x) -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -+$as_echo "none needed" >&6; } ;; -+ xno) -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -+$as_echo "unsupported" >&6; } ;; - *) -- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 -- CC="$CC $ac_cv_prog_cc_stdc" ;; -+ CC="$CC $ac_cv_prog_cc_c89" -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; - esac -+if test "x$ac_cv_prog_cc_c89" != xno; then : - --# Some people use a C++ compiler to compile C. Since we use `exit', --# in C++ we need to declare it. In case someone uses the same compiler --# for both compiling C and C++ we need to have the C++ compiler decide --# the declaration of exit, since it's the most demanding environment. --cat >conftest.$ac_ext <<_ACEOF --#ifndef __cplusplus -- choke me --#endif --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- for ac_declaration in \ -- '' \ -- 'extern "C" void std::exit (int) throw (); using std::exit;' \ -- 'extern "C" void std::exit (int); using std::exit;' \ -- 'extern "C" void exit (int) throw ();' \ -- 'extern "C" void exit (int);' \ -- 'void exit (int);' --do -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_declaration --#include --int --main () --{ --exit (42); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- : --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --continue --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_declaration --int --main () --{ --exit (42); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- break --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --done --rm -f conftest* --if test -n "$ac_declaration"; then -- echo '#ifdef __cplusplus' >>confdefs.h -- echo $ac_declaration >>confdefs.h -- echo '#endif' >>confdefs.h - fi - --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' - ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -@@ -3409,10 +4321,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - - depcc="$CC" am_compiler_list= - --echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 --echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 --if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -+$as_echo_n "checking dependency style of $depcc... " >&6; } -+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up -@@ -3437,6 +4349,11 @@ else - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*$[a-zA-Z0-9]*$)$/\1/p' < ./depcomp` - fi -+ am__universal=false -+ case " $depcc " in #( -+ *\ -arch\ *\ -arch\ *) am__universal=true ;; -+ esac -+ - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and -@@ -3454,7 +4371,17 @@ else - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - -+ # We check with `-c' and `-o' for the sake of the "dashmstdout" -+ # mode. It turns out that the SunPro C++ compiler does not properly -+ # handle `-M -o', and we need to detect this. Also, some Intel -+ # versions had trouble with output in subdirs -+ am__obj=sub/conftest.${OBJEXT-o} -+ am__minus_obj="-o $am__obj" - case $depmode in -+ gcc) -+ # This depmode causes a compiler race in universal mode. -+ test "$am__universal" = false || continue -+ ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested -@@ -3464,18 +4391,23 @@ else - break - fi - ;; -+ msvisualcpp | msvcmsys) -+ # This compiler won't grok `-c -o', but also, the minuso test has -+ # not run yet. These depmodes are late enough in the game, and -+ # so weak that their functioning should not be impacted. -+ am__obj=conftest.${OBJEXT-o} -+ am__minus_obj= -+ ;; - none) break ;; - esac -- # We check with `-c' and `-o' for the sake of the "dashmstdout" -- # mode. It turns out that the SunPro C++ compiler does not properly -- # handle `-M -o', and we need to detect this. - if depmode=$depmode \ -- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ -+ source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ -- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ -+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && -+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && -- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && -+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message -@@ -3499,13 +4431,11 @@ else - fi - - fi --echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 --echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } - CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - -- -- --if -+ if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= -@@ -3521,15 +4451,15 @@ ac_cpp='$CPP $CPPFLAGS' - ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' - ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' - ac_compiler_gnu=$ac_cv_c_compiler_gnu --echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 --echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -+$as_echo_n "checking how to run the C preprocessor... " >&6; } - # On Suns, sometimes $CPP names a directory. - if test -n "$CPP" && test -d "$CPP"; then - CPP= - fi - if test -z "$CPP"; then -- if test "${ac_cv_prog_CPP+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ if test "${ac_cv_prog_CPP+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" -@@ -3543,11 +4473,7 @@ do - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - #ifdef __STDC__ - # include -@@ -3556,78 +4482,34 @@ cat >>conftest.$ac_ext <<_ACEOF - #endif - Syntax error - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -- : --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+if ac_fn_c_try_cpp "$LINENO"; then : - -+else - # Broken: fails on valid input. - continue - fi --rm -f conftest.err conftest.$ac_ext -+rm -f conftest.err conftest.i conftest.$ac_ext - -- # OK, works on sane cases. Now check whether non-existent headers -+ # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - #include - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. - continue - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- - # Passes both tests. - ac_preproc_ok=: - break - fi --rm -f conftest.err conftest.$ac_ext -+rm -f conftest.err conftest.i conftest.$ac_ext - - done - # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. --rm -f conftest.err conftest.$ac_ext --if $ac_preproc_ok; then -+rm -f conftest.i conftest.err conftest.$ac_ext -+if $ac_preproc_ok; then : - break - fi - -@@ -3639,8 +4521,8 @@ fi - else - ac_cv_prog_CPP=$CPP - fi --echo "$as_me:$LINENO: result: $CPP" >&5 --echo "${ECHO_T}$CPP" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -+$as_echo "$CPP" >&6; } - ac_preproc_ok=false - for ac_c_preproc_warn_flag in '' yes - do -@@ -3650,11 +4532,7 @@ do - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - #ifdef __STDC__ - # include -@@ -3663,85 +4541,40 @@ cat >>conftest.$ac_ext <<_ACEOF - #endif - Syntax error - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -- : --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+if ac_fn_c_try_cpp "$LINENO"; then : - -+else - # Broken: fails on valid input. - continue - fi --rm -f conftest.err conftest.$ac_ext -+rm -f conftest.err conftest.i conftest.$ac_ext - -- # OK, works on sane cases. Now check whether non-existent headers -+ # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - #include - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. - continue - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- - # Passes both tests. - ac_preproc_ok=: - break - fi --rm -f conftest.err conftest.$ac_ext -+rm -f conftest.err conftest.i conftest.$ac_ext - - done - # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. --rm -f conftest.err conftest.$ac_ext --if $ac_preproc_ok; then -- : -+rm -f conftest.i conftest.err conftest.$ac_ext -+if $ac_preproc_ok; then : -+ - else -- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check --See \`config.log' for more details." >&5 --echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check --See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } -+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -+See \`config.log' for more details" "$LINENO" 5 ; } - fi - - ac_ext=c -@@ -3750,217 +4583,413 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS con - ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' - ac_compiler_gnu=$ac_cv_c_compiler_gnu - --# Check whether --enable-shared or --disable-shared was given. --if test "${enable_shared+set}" = set; then -- enableval="$enable_shared" -- p=${PACKAGE-default} -- case $enableval in -- yes) enable_shared=yes ;; -- no) enable_shared=no ;; -- *) -- enable_shared=no -- # Look at the argument we got. We use all the common list separators. -- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -- for pkg in $enableval; do -- IFS="$lt_save_ifs" -- if test "X$pkg" = "X$p"; then -- enable_shared=yes -- fi -- done -- IFS="$lt_save_ifs" -- ;; -- esac --else -- enable_shared=yes --fi; -+case `pwd` in -+ *\ * | *\ *) -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -+esac -+ -+ -+ -+macro_version='2.2.6b' -+macro_revision='1.3017' -+ -+ -+ -+ -+ -+ -+ -+ -+ - --# Check whether --enable-static or --disable-static was given. --if test "${enable_static+set}" = set; then -- enableval="$enable_static" -- p=${PACKAGE-default} -- case $enableval in -- yes) enable_static=yes ;; -- no) enable_static=no ;; -- *) -- enable_static=no -- # Look at the argument we got. We use all the common list separators. -- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -- for pkg in $enableval; do -- IFS="$lt_save_ifs" -- if test "X$pkg" = "X$p"; then -- enable_static=yes -- fi -- done -- IFS="$lt_save_ifs" -- ;; -- esac --else -- enable_static=yes --fi; - --# Check whether --enable-fast-install or --disable-fast-install was given. --if test "${enable_fast_install+set}" = set; then -- enableval="$enable_fast_install" -- p=${PACKAGE-default} -- case $enableval in -- yes) enable_fast_install=yes ;; -- no) enable_fast_install=no ;; -- *) -- enable_fast_install=no -- # Look at the argument we got. We use all the common list separators. -- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -- for pkg in $enableval; do -- IFS="$lt_save_ifs" -- if test "X$pkg" = "X$p"; then -- enable_fast_install=yes -- fi -- done -- IFS="$lt_save_ifs" -- ;; -- esac --else -- enable_fast_install=yes --fi; -+ -+ -+ltmain="$ac_aux_dir/ltmain.sh" - - # Make sure we can run config.sub. --$ac_config_sub sun4 >/dev/null 2>&1 || -- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 --echo "$as_me: error: cannot run $ac_config_sub" >&2;} -- { (exit 1); exit 1; }; } -- --echo "$as_me:$LINENO: checking build system type" >&5 --echo $ECHO_N "checking build system type... $ECHO_C" >&6 --if test "${ac_cv_build+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_cv_build_alias=$build_alias --test -z "$ac_cv_build_alias" && -- ac_cv_build_alias=`$ac_config_guess` --test -z "$ac_cv_build_alias" && -- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 --echo "$as_me: error: cannot guess build type; you must specify one" >&2;} -- { (exit 1); exit 1; }; } --ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || -- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 --echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} -- { (exit 1); exit 1; }; } -+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || -+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - --fi --echo "$as_me:$LINENO: result: $ac_cv_build" >&5 --echo "${ECHO_T}$ac_cv_build" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -+$as_echo_n "checking build system type... " >&6; } -+if test "${ac_cv_build+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_build_alias=$build_alias -+test "x$ac_build_alias" = x && -+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -+test "x$ac_build_alias" = x && -+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || -+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 -+ -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -+$as_echo "$ac_cv_build" >&6; } -+case $ac_cv_build in -+*-*-*) ;; -+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;; -+esac - build=$ac_cv_build --build_cpu=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\1/'` --build_vendor=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\2/'` --build_os=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\3/'` -- -- --echo "$as_me:$LINENO: checking host system type" >&5 --echo $ECHO_N "checking host system type... $ECHO_C" >&6 --if test "${ac_cv_host+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_cv_host_alias=$host_alias --test -z "$ac_cv_host_alias" && -- ac_cv_host_alias=$ac_cv_build_alias --ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || -- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 --echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} -- { (exit 1); exit 1; }; } -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_build -+shift -+build_cpu=$1 -+build_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+build_os=$* -+IFS=$ac_save_IFS -+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -+ -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -+$as_echo_n "checking host system type... " >&6; } -+if test "${ac_cv_host+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test "x$host_alias" = x; then -+ ac_cv_host=$ac_cv_build -+else -+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || -+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -+fi - - fi --echo "$as_me:$LINENO: result: $ac_cv_host" >&5 --echo "${ECHO_T}$ac_cv_host" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -+$as_echo "$ac_cv_host" >&6; } -+case $ac_cv_host in -+*-*-*) ;; -+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;; -+esac - host=$ac_cv_host --host_cpu=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\1/'` --host_vendor=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\2/'` --host_os=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\3/'` -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_host -+shift -+host_cpu=$1 -+host_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+host_os=$* -+IFS=$ac_save_IFS -+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -+ -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -+$as_echo_n "checking for a sed that does not truncate output... " >&6; } -+if test "${ac_cv_path_SED+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ -+ for ac_i in 1 2 3 4 5 6 7; do -+ ac_script="$ac_script$as_nl$ac_script" -+ done -+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed -+ { ac_script=; unset ac_script;} -+ if test -z "$SED"; then -+ ac_path_SED_found=false -+ # Loop through the user's path and test for each of PROGNAME-LIST -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in sed gsed; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue -+# Check for GNU ac_path_SED and select it if it is found. -+ # Check for GNU $ac_path_SED -+case `"$ac_path_SED" --version 2>&1` in -+*GNU*) -+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -+*) -+ ac_count=0 -+ $as_echo_n 0123456789 >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ $as_echo '' >> "conftest.nl" -+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ as_fn_arith $ac_count + 1 && ac_count=$as_val -+ if test $ac_count -gt ${ac_path_SED_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_SED="$ac_path_SED" -+ ac_path_SED_max=$ac_count -+ fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ $ac_path_SED_found && break 3 -+ done -+ done -+ done -+IFS=$as_save_IFS -+ if test -z "$ac_cv_path_SED"; then -+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 -+ fi -+else -+ ac_cv_path_SED=$SED -+fi -+ -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -+$as_echo "$ac_cv_path_SED" >&6; } -+ SED="$ac_cv_path_SED" -+ rm -f conftest.sed -+ -+test -z "$SED" && SED=sed -+Xsed="$SED -e 1s/^X//" -+ -+ -+ - - --echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 --echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 --if test "${lt_cv_path_SED+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ -+ -+ -+ -+ -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -+$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -+if test "${ac_cv_path_GREP+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- # Loop through the user's path and test for sed and gsed. --# Then use that list of sed's as ones to test for truncation. --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH -+ if test -z "$GREP"; then -+ ac_path_GREP_found=false -+ # Loop through the user's path and test for each of PROGNAME-LIST -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for lt_ac_prog in sed gsed; do -+ for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then -- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" -- fi -+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -+# Check for GNU ac_path_GREP and select it if it is found. -+ # Check for GNU $ac_path_GREP -+case `"$ac_path_GREP" --version 2>&1` in -+*GNU*) -+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -+*) -+ ac_count=0 -+ $as_echo_n 0123456789 >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ $as_echo 'GREP' >> "conftest.nl" -+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ as_fn_arith $ac_count + 1 && ac_count=$as_val -+ if test $ac_count -gt ${ac_path_GREP_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_GREP="$ac_path_GREP" -+ ac_path_GREP_max=$ac_count -+ fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ $ac_path_GREP_found && break 3 - done - done --done --lt_ac_max=0 --lt_ac_count=0 --# Add /usr/xpg4/bin/sed as it is typically found on Solaris --# along with /bin/sed that truncates output. --for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do -- test ! -f $lt_ac_sed && break -- cat /dev/null > conftest.in -- lt_ac_count=0 -- echo $ECHO_N "0123456789$ECHO_C" >conftest.in -- # Check for GNU sed and select it if it is found. -- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then -- lt_cv_path_SED=$lt_ac_sed -- break -+ done -+IFS=$as_save_IFS -+ if test -z "$ac_cv_path_GREP"; then -+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -- while true; do -- cat conftest.in conftest.in >conftest.tmp -- mv conftest.tmp conftest.in -- cp conftest.in conftest.nl -- echo >>conftest.nl -- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break -- cmp -s conftest.out conftest.nl || break -- # 10000 chars as input seems more than enough -- test $lt_ac_count -gt 10 && break -- lt_ac_count=`expr $lt_ac_count + 1` -- if test $lt_ac_count -gt $lt_ac_max; then -- lt_ac_max=$lt_ac_count -- lt_cv_path_SED=$lt_ac_sed -+else -+ ac_cv_path_GREP=$GREP -+fi -+ -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -+$as_echo "$ac_cv_path_GREP" >&6; } -+ GREP="$ac_cv_path_GREP" -+ -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -+$as_echo_n "checking for egrep... " >&6; } -+if test "${ac_cv_path_EGREP+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 -+ then ac_cv_path_EGREP="$GREP -E" -+ else -+ if test -z "$EGREP"; then -+ ac_path_EGREP_found=false -+ # Loop through the user's path and test for each of PROGNAME-LIST -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in egrep; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -+# Check for GNU ac_path_EGREP and select it if it is found. -+ # Check for GNU $ac_path_EGREP -+case `"$ac_path_EGREP" --version 2>&1` in -+*GNU*) -+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -+*) -+ ac_count=0 -+ $as_echo_n 0123456789 >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ $as_echo 'EGREP' >> "conftest.nl" -+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ as_fn_arith $ac_count + 1 && ac_count=$as_val -+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_EGREP="$ac_path_EGREP" -+ ac_path_EGREP_max=$ac_count - fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break - done --done --SED=$lt_cv_path_SED -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ $ac_path_EGREP_found && break 3 -+ done -+ done -+ done -+IFS=$as_save_IFS -+ if test -z "$ac_cv_path_EGREP"; then -+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 -+ fi -+else -+ ac_cv_path_EGREP=$EGREP -+fi - -+ fi - fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -+$as_echo "$ac_cv_path_EGREP" >&6; } -+ EGREP="$ac_cv_path_EGREP" - --echo "$as_me:$LINENO: result: $SED" >&5 --echo "${ECHO_T}$SED" >&6 - --echo "$as_me:$LINENO: checking for egrep" >&5 --echo $ECHO_N "checking for egrep... $ECHO_C" >&6 --if test "${ac_cv_prog_egrep+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -+$as_echo_n "checking for fgrep... " >&6; } -+if test "${ac_cv_path_FGREP+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 -- then ac_cv_prog_egrep='grep -E' -- else ac_cv_prog_egrep='egrep' -+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 -+ then ac_cv_path_FGREP="$GREP -F" -+ else -+ if test -z "$FGREP"; then -+ ac_path_FGREP_found=false -+ # Loop through the user's path and test for each of PROGNAME-LIST -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in fgrep; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue -+# Check for GNU ac_path_FGREP and select it if it is found. -+ # Check for GNU $ac_path_FGREP -+case `"$ac_path_FGREP" --version 2>&1` in -+*GNU*) -+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -+*) -+ ac_count=0 -+ $as_echo_n 0123456789 >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ $as_echo 'FGREP' >> "conftest.nl" -+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ as_fn_arith $ac_count + 1 && ac_count=$as_val -+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_FGREP="$ac_path_FGREP" -+ ac_path_FGREP_max=$ac_count - fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ $ac_path_FGREP_found && break 3 -+ done -+ done -+ done -+IFS=$as_save_IFS -+ if test -z "$ac_cv_path_FGREP"; then -+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 -+ fi -+else -+ ac_cv_path_FGREP=$FGREP - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 --echo "${ECHO_T}$ac_cv_prog_egrep" >&6 -- EGREP=$ac_cv_prog_egrep - -+ fi -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -+$as_echo "$ac_cv_path_FGREP" >&6; } -+ FGREP="$ac_cv_path_FGREP" -+ -+ -+test -z "$GREP" && GREP=grep - - --# Check whether --with-gnu-ld or --without-gnu-ld was given. --if test "${with_gnu_ld+set}" = set; then -- withval="$with_gnu_ld" -- test "$withval" = no || with_gnu_ld=yes -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+# Check whether --with-gnu-ld was given. -+if test "${with_gnu_ld+set}" = set; then : -+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes - else - with_gnu_ld=no --fi; -+fi -+ - ac_prog=ld - if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. -- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 --echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -+$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw -@@ -3973,9 +5002,9 @@ echo $ECHO_N "checking for ld used by $C - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld -- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` -- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do -- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` -+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` -+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do -+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; -@@ -3989,14 +5018,14 @@ echo $ECHO_N "checking for ld used by $C - ;; - esac - elif test "$with_gnu_ld" = yes; then -- echo "$as_me:$LINENO: checking for GNU ld" >&5 --echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -+$as_echo_n "checking for GNU ld... " >&6; } - else -- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 --echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -+$as_echo_n "checking for non-GNU ld... " >&6; } - fi --if test "${lt_cv_path_LD+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+if test "${lt_cv_path_LD+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -@@ -4006,7 +5035,7 @@ else - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, -- # but apparently some GNU ld's only accept -v. -+ # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 --echo "${ECHO_T}$LD" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 -+$as_echo "$LD" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi --test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 --echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} -- { (exit 1); exit 1; }; } --echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 --echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 --if test "${lt_cv_prog_gnu_ld+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -+if test "${lt_cv_prog_gnu_ld+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- # I'd rather use --version here, but apparently some GNU ld's only accept -v. -+ # I'd rather use --version here, but apparently some GNU lds only accept -v. - case `$LD -v 2>&1 &1 &5 --echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 -+$as_echo "$lt_cv_prog_gnu_ld" >&6; } - with_gnu_ld=$lt_cv_prog_gnu_ld - - --echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 --echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 --if test "${lt_cv_ld_reload_flag+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- lt_cv_ld_reload_flag='-r' --fi --echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 --echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 --reload_flag=$lt_cv_ld_reload_flag --case $reload_flag in --"" | " "*) ;; --*) reload_flag=" $reload_flag" ;; --esac --reload_cmds='$LD$reload_flag -o $output$reload_objs' - --echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 --echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 --if test "${lt_cv_path_NM+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$NM"; then -- # Let the user override the test. -+ -+ -+ -+ -+ -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -+if test "${lt_cv_path_NM+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$NM"; then -+ # Let the user override the test. - lt_cv_path_NM="$NM" - else -- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do -- IFS="$lt_save_ifs" -- test -z "$ac_dir" && ac_dir=. -- tmp_nm="$ac_dir/${ac_tool_prefix}nm" -- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then -- # Check to see if the nm accepts a BSD-compat flag. -- # Adding the `sed 1q' prevents false positives on HP-UX, which says: -- # nm: unknown option "B" ignored -- # Tru64's nm complains that /dev/null is an invalid object file -- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in -- */dev/null* | *'Invalid file or object type'*) -- lt_cv_path_NM="$tmp_nm -B" -- break -- ;; -- *) -- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in -- */dev/null*) -- lt_cv_path_NM="$tmp_nm -p" -+ lt_nm_to_check="${ac_tool_prefix}nm" -+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then -+ lt_nm_to_check="$lt_nm_to_check nm" -+ fi -+ for lt_tmp_nm in $lt_nm_to_check; do -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do -+ IFS="$lt_save_ifs" -+ test -z "$ac_dir" && ac_dir=. -+ tmp_nm="$ac_dir/$lt_tmp_nm" -+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then -+ # Check to see if the nm accepts a BSD-compat flag. -+ # Adding the `sed 1q' prevents false positives on HP-UX, which says: -+ # nm: unknown option "B" ignored -+ # Tru64's nm complains that /dev/null is an invalid object file -+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in -+ */dev/null* | *'Invalid file or object type'*) -+ lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) -- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but -- continue # so that we can try to find one that supports BSD flags -+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in -+ */dev/null*) -+ lt_cv_path_NM="$tmp_nm -p" -+ break -+ ;; -+ *) -+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but -+ continue # so that we can try to find one that supports BSD flags -+ ;; -+ esac - ;; - esac -- esac -- fi -+ fi -+ done -+ IFS="$lt_save_ifs" - done -- IFS="$lt_save_ifs" -- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -+ : ${lt_cv_path_NM=no} - fi - fi --echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 --echo "${ECHO_T}$lt_cv_path_NM" >&6 --NM="$lt_cv_path_NM" -- --echo "$as_me:$LINENO: checking whether ln -s works" >&5 --echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 --LN_S=$as_ln_s --if test "$LN_S" = "ln -s"; then -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -+$as_echo "$lt_cv_path_NM" >&6; } -+if test "$lt_cv_path_NM" != "no"; then -+ NM="$lt_cv_path_NM" - else -- echo "$as_me:$LINENO: result: no, using $LN_S" >&5 --echo "${ECHO_T}no, using $LN_S" >&6 --fi -- --echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 --echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 --if test "${lt_cv_deplibs_check_method+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ # Didn't find any BSD compatible name lister, look for dumpbin. -+ if test -n "$ac_tool_prefix"; then -+ for ac_prog in "dumpbin -symbols" "link -dump -symbols" -+ do -+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -+set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_DUMPBIN+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- lt_cv_file_magic_cmd='$MAGIC_CMD' --lt_cv_file_magic_test_file= --lt_cv_deplibs_check_method='unknown' --# Need to set the preceding variable on all platforms that support --# interlibrary dependencies. --# 'none' -- dependencies not supported. --# `unknown' -- same as none, but documents that we really don't know. --# 'pass_all' -- all dependencies passed with no checks. --# 'test_compile' -- check by making test program. --# 'file_magic [[regex]]' -- check by looking for files in library path --# which responds to the $file_magic_cmd with a given extended regex. --# If you have `file' or equivalent on your system and you're not sure --# whether `pass_all' will *always* work, you probably want this one. -+ if test -n "$DUMPBIN"; then -+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS - --case $host_os in --aix4* | aix5*) -- lt_cv_deplibs_check_method=pass_all -- ;; -+fi -+fi -+DUMPBIN=$ac_cv_prog_DUMPBIN -+if test -n "$DUMPBIN"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -+$as_echo "$DUMPBIN" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi - --beos*) -- lt_cv_deplibs_check_method=pass_all -- ;; - --bsdi4*) -- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' -- lt_cv_file_magic_cmd='/usr/bin/file -L' -- lt_cv_file_magic_test_file=/shlib/libc.so -- ;; -+ test -n "$DUMPBIN" && break -+ done -+fi -+if test -z "$DUMPBIN"; then -+ ac_ct_DUMPBIN=$DUMPBIN -+ for ac_prog in "dumpbin -symbols" "link -dump -symbols" -+do -+ # Extract the first word of "$ac_prog", so it can be a program name with args. -+set dummy $ac_prog; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$ac_ct_DUMPBIN"; then -+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS - --cygwin*) -- # func_win32_libid is a shell function defined in ltmain.sh -- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' -- lt_cv_file_magic_cmd='func_win32_libid' -- ;; -+fi -+fi -+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -+if test -n "$ac_ct_DUMPBIN"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -+$as_echo "$ac_ct_DUMPBIN" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi - --mingw* | pw32*) -- # Base MSYS/MinGW do not provide the 'file' command needed by -- # func_win32_libid shell function, so use a weaker test based on 'objdump'. -- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' -- lt_cv_file_magic_cmd='$OBJDUMP -f' -- ;; - --darwin* | rhapsody*) -- lt_cv_deplibs_check_method=pass_all -- ;; -+ test -n "$ac_ct_DUMPBIN" && break -+done - --freebsd* | kfreebsd*-gnu) -- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then -- case $host_cpu in -- i*86 ) -- # Not sure whether the presence of OpenBSD here was a mistake. -- # Let's accept both of them until this is cleared up. -- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' -- lt_cv_file_magic_cmd=/usr/bin/file -- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` -- ;; -- esac -+ if test "x$ac_ct_DUMPBIN" = x; then -+ DUMPBIN=":" - else -- lt_cv_deplibs_check_method=pass_all -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ DUMPBIN=$ac_ct_DUMPBIN - fi -- ;; -+fi - --gnu*) -- lt_cv_deplibs_check_method=pass_all -- ;; - --hpux10.20* | hpux11*) -- lt_cv_file_magic_cmd=/usr/bin/file -- case "$host_cpu" in -- ia64*) -- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' -- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so -- ;; -- hppa*64*) -- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' -- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl -- ;; -- *) -- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' -- lt_cv_file_magic_test_file=/usr/lib/libc.sl -- ;; -- esac -- ;; -+ if test "$DUMPBIN" != ":"; then -+ NM="$DUMPBIN" -+ fi -+fi -+test -z "$NM" && NM=nm - --irix5* | irix6* | nonstopux*) -- case $LD in -- *-32|*"-32 ") libmagic=32-bit;; -- *-n32|*"-n32 ") libmagic=N32;; -- *-64|*"-64 ") libmagic=64-bit;; -- *) libmagic=never-match;; -- esac -- lt_cv_deplibs_check_method=pass_all -- ;; - --# This must be Linux ELF. --linux*) -- case $host_cpu in -- alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*|x86_64*) -- lt_cv_deplibs_check_method=pass_all ;; -- *) -- # glibc up to 2.1.1 does not perform some relocations on ARM -- # this will be overridden with pass_all, but let us keep it just in case -- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; -- esac -- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` -- lt_cv_deplibs_check_method=pass_all -- ;; - --netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then -- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' -- else -- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' -- fi -- ;; - --newos6*) -- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' -- lt_cv_file_magic_cmd=/usr/bin/file -- lt_cv_file_magic_test_file=/usr/lib/libnls.so -- ;; - --nto-qnx*) -- lt_cv_deplibs_check_method=unknown -- ;; - --openbsd*) -- lt_cv_file_magic_cmd=/usr/bin/file -- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` -- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' -- else -- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -+$as_echo_n "checking the name lister ($NM) interface... " >&6; } -+if test "${lt_cv_nm_interface+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_nm_interface="BSD nm" -+ echo "int some_variable = 0;" > conftest.$ac_ext -+ (eval echo "\"\$as_me:5266: $ac_compile\"" >&5) -+ (eval "$ac_compile" 2>conftest.err) -+ cat conftest.err >&5 -+ (eval echo "\"\$as_me:5269: $NM \\\"conftest.$ac_objext\\\"\"" >&5) -+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) -+ cat conftest.err >&5 -+ (eval echo "\"\$as_me:5272: output\"" >&5) -+ cat conftest.out >&5 -+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then -+ lt_cv_nm_interface="MS dumpbin" - fi -- ;; -+ rm -f conftest* -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -+$as_echo "$lt_cv_nm_interface" >&6; } - --osf3* | osf4* | osf5*) -- lt_cv_deplibs_check_method=pass_all -- ;; -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -+$as_echo_n "checking whether ln -s works... " >&6; } -+LN_S=$as_ln_s -+if test "$LN_S" = "ln -s"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -+$as_echo "yes" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -+$as_echo "no, using $LN_S" >&6; } -+fi - --sco3.2v5*) -- lt_cv_deplibs_check_method=pass_all -- ;; -+# find the maximum length of command line arguments -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -+$as_echo_n "checking the maximum length of command line arguments... " >&6; } -+if test "${lt_cv_sys_max_cmd_len+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ i=0 -+ teststring="ABCD" - --solaris*) -- lt_cv_deplibs_check_method=pass_all -- ;; -+ case $build_os in -+ msdosdjgpp*) -+ # On DJGPP, this test can blow up pretty badly due to problems in libc -+ # (any single argument exceeding 2000 bytes causes a buffer overrun -+ # during glob expansion). Even if it were fixed, the result of this -+ # check would be larger than it should be. -+ lt_cv_sys_max_cmd_len=12288; # 12K is about right -+ ;; - --sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -- case $host_vendor in -- motorola) -- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' -- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` -+ gnu*) -+ # Under GNU Hurd, this test is not required because there is -+ # no limit to the length of command line arguments. -+ # Libtool will interpret -1 as no limit whatsoever -+ lt_cv_sys_max_cmd_len=-1; - ;; -- ncr) -- lt_cv_deplibs_check_method=pass_all -+ -+ cygwin* | mingw* | cegcc*) -+ # On Win9x/ME, this test blows up -- it succeeds, but takes -+ # about 5 minutes as the teststring grows exponentially. -+ # Worse, since 9x/ME are not pre-emptively multitasking, -+ # you end up with a "frozen" computer, even though with patience -+ # the test eventually succeeds (with a max line length of 256k). -+ # Instead, let's just punt: use the minimum linelength reported by -+ # all of the supported platforms: 8192 (on NT/2K/XP). -+ lt_cv_sys_max_cmd_len=8192; - ;; -- sequent) -- lt_cv_file_magic_cmd='/bin/file' -- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' -+ -+ amigaos*) -+ # On AmigaOS with pdksh, this test takes hours, literally. -+ # So we just punt and use a minimum line length of 8192. -+ lt_cv_sys_max_cmd_len=8192; - ;; -- sni) -- lt_cv_file_magic_cmd='/bin/file' -- lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" -- lt_cv_file_magic_test_file=/lib/libc.so -+ -+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) -+ # This has been around since 386BSD, at least. Likely further. -+ if test -x /sbin/sysctl; then -+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` -+ elif test -x /usr/sbin/sysctl; then -+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` -+ else -+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs -+ fi -+ # And add a safety zone -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` -+ ;; -+ -+ interix*) -+ # We know the value 262144 and hardcode it with a safety zone (like BSD) -+ lt_cv_sys_max_cmd_len=196608 -+ ;; -+ -+ osf*) -+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure -+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not -+ # nice to cause kernel panics so lets avoid the loop below. -+ # First set a reasonable default. -+ lt_cv_sys_max_cmd_len=16384 -+ # -+ if test -x /sbin/sysconfig; then -+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in -+ *1*) lt_cv_sys_max_cmd_len=-1 ;; -+ esac -+ fi - ;; -- siemens) -- lt_cv_deplibs_check_method=pass_all -+ sco3.2v5*) -+ lt_cv_sys_max_cmd_len=102400 -+ ;; -+ sysv5* | sco5v6* | sysv4.2uw2*) -+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` -+ if test -n "$kargmax"; then -+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` -+ else -+ lt_cv_sys_max_cmd_len=32768 -+ fi -+ ;; -+ *) -+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` -+ if test -n "$lt_cv_sys_max_cmd_len"; then -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` -+ else -+ # Make teststring a little bigger before we do anything with it. -+ # a 1K string should be a reasonable start. -+ for i in 1 2 3 4 5 6 7 8 ; do -+ teststring=$teststring$teststring -+ done -+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} -+ # If test is not a shell built-in, we'll probably end up computing a -+ # maximum length that is only half of the actual maximum length, but -+ # we can't tell. -+ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ -+ = "XX$teststring$teststring"; } >/dev/null 2>&1 && -+ test $i != 17 # 1/2 MB should be enough -+ do -+ i=`expr $i + 1` -+ teststring=$teststring$teststring -+ done -+ # Only check the string length outside the loop. -+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` -+ teststring= -+ # Add a significant safety factor because C++ compilers can tack on -+ # massive amounts of additional arguments before passing them to the -+ # linker. It appears as though 1/2 is a usable value. -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` -+ fi - ;; - esac -- ;; - --sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*) -- lt_cv_deplibs_check_method=pass_all -- ;; --esac -+fi - -+if test -n $lt_cv_sys_max_cmd_len ; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -+$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -+$as_echo "none" >&6; } - fi --echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 --echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 --file_magic_cmd=$lt_cv_file_magic_cmd --deplibs_check_method=$lt_cv_deplibs_check_method --test -z "$deplibs_check_method" && deplibs_check_method=unknown -+max_cmd_len=$lt_cv_sys_max_cmd_len - - - - --# If no C compiler was specified, use CC. --LTCC=${LTCC-"$CC"} - --# Allow CC to be a program name with arguments. --compiler=$CC - -+: ${CP="cp -f"} -+: ${MV="mv -f"} -+: ${RM="rm -f"} -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 -+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } -+# Try some XSI features -+xsi_shell=no -+( _lt_dummy="a/b/c" -+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ -+ = c,a/b,, \ -+ && eval 'test $(( 1 + 1 )) -eq 2 \ -+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ -+ && xsi_shell=yes -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 -+$as_echo "$xsi_shell" >&6; } -+ -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 -+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } -+lt_shell_append=no -+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ -+ >/dev/null 2>&1 \ -+ && lt_shell_append=yes -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 -+$as_echo "$lt_shell_append" >&6; } - --# Check whether --enable-libtool-lock or --disable-libtool-lock was given. --if test "${enable_libtool_lock+set}" = set; then -- enableval="$enable_libtool_lock" - --fi; --test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ lt_unset=unset -+else -+ lt_unset=false -+fi - --# Some flags need to be propagated to the compiler or linker for good --# libtool support. --case $host in --ia64-*-hpux*) -- # Find out which ABI we are using. -- echo 'int i;' > conftest.$ac_ext -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- case `/usr/bin/file conftest.$ac_objext` in -- *ELF-32*) -- HPUX_IA64_MODE="32" -- ;; -- *ELF-64*) -- HPUX_IA64_MODE="64" -- ;; -- esac -- fi -- rm -rf conftest* -+ -+ -+ -+ -+# test EBCDIC or ASCII -+case `echo X|tr X '\101'` in -+ A) # ASCII based system -+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr -+ lt_SP2NL='tr \040 \012' -+ lt_NL2SP='tr \015\012 \040\040' - ;; --*-*-irix6*) -- # Find out which ABI we are using. -- echo '#line 4361 "configure"' > conftest.$ac_ext -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- if test "$lt_cv_prog_gnu_ld" = yes; then -- case `/usr/bin/file conftest.$ac_objext` in -- *32-bit*) -- LD="${LD-ld} -melf32bsmip" -- ;; -- *N32*) -- LD="${LD-ld} -melf32bmipn32" -- ;; -- *64-bit*) -- LD="${LD-ld} -melf64bmip" -- ;; -- esac -- else -- case `/usr/bin/file conftest.$ac_objext` in -- *32-bit*) -- LD="${LD-ld} -32" -- ;; -- *N32*) -- LD="${LD-ld} -n32" -- ;; -- *64-bit*) -- LD="${LD-ld} -64" -- ;; -- esac -- fi -- fi -- rm -rf conftest* -+ *) # EBCDIC based system -+ lt_SP2NL='tr \100 \n' -+ lt_NL2SP='tr \r\n \100\100' - ;; -+esac - --x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) -- # Find out which ABI we are using. -- echo 'int i;' > conftest.$ac_ext -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- case "`/usr/bin/file conftest.o`" in -- *32-bit*) -- case $host in -- x86_64-*linux*) -- LD="${LD-ld} -m elf_i386" -- ;; -- ppc64-*linux*|powerpc64-*linux*) -- LD="${LD-ld} -m elf32ppclinux" -- ;; -- s390x-*linux*) -- LD="${LD-ld} -m elf_s390" -- ;; -- sparc64-*linux*) -- LD="${LD-ld} -m elf32_sparc" -- ;; -- esac -- ;; -- *64-bit*) -- case $host in -- x86_64-*linux*) -- LD="${LD-ld} -m elf_x86_64" -- ;; -- ppc*-*linux*|powerpc*-*linux*) -- LD="${LD-ld} -m elf64ppc" -- ;; -- s390*-*linux*) -- LD="${LD-ld} -m elf64_s390" -- ;; -- sparc*-*linux*) -- LD="${LD-ld} -m elf64_sparc" -- ;; -- esac -- ;; -- esac -- fi -- rm -rf conftest* -- ;; - --*-*-sco3.2v5*) -- # On SCO OpenServer 5, we need -belf to get full-featured binaries. -- SAVE_CFLAGS="$CFLAGS" -- CFLAGS="$CFLAGS -belf" -- echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 --echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 --if test "${lt_cv_cc_needs_belf+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu - -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ - --int --main () --{ - -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- lt_cv_cc_needs_belf=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 - --lt_cv_cc_needs_belf=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext -- ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu - --fi --echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 --echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 -- if test x"$lt_cv_cc_needs_belf" != x"yes"; then -- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf -- CFLAGS="$SAVE_CFLAGS" -- fi -- ;; - -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -+$as_echo_n "checking for $LD option to reload object files... " >&6; } -+if test "${lt_cv_ld_reload_flag+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_ld_reload_flag='-r' -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -+$as_echo "$lt_cv_ld_reload_flag" >&6; } -+reload_flag=$lt_cv_ld_reload_flag -+case $reload_flag in -+"" | " "*) ;; -+*) reload_flag=" $reload_flag" ;; -+esac -+reload_cmds='$LD$reload_flag -o $output$reload_objs' -+case $host_os in -+ darwin*) -+ if test "$GCC" = yes; then -+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' -+ else -+ reload_cmds='$LD$reload_flag -o $output$reload_objs' -+ fi -+ ;; - esac - --need_locks="$enable_libtool_lock" - - - --echo "$as_me:$LINENO: checking for ANSI C header files" >&5 --echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 --if test "${ac_cv_header_stdc+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include --#include --#include --#include - --int --main () --{ - -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_header_stdc=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_header_stdc=no --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - --if test $ac_cv_header_stdc = yes; then -- # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include - --_ACEOF --if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -- $EGREP "memchr" >/dev/null 2>&1; then -- : -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -+set dummy ${ac_tool_prefix}objdump; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_OBJDUMP+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- ac_cv_header_stdc=no --fi --rm -f conftest* -+ if test -n "$OBJDUMP"; then -+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS - - fi -- --if test $ac_cv_header_stdc = yes; then -- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include -- --_ACEOF --if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -- $EGREP "free" >/dev/null 2>&1; then -- : -+fi -+OBJDUMP=$ac_cv_prog_OBJDUMP -+if test -n "$OBJDUMP"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -+$as_echo "$OBJDUMP" >&6; } - else -- ac_cv_header_stdc=no -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi --rm -f conftest* - --fi - --if test $ac_cv_header_stdc = yes; then -- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -- if test "$cross_compiling" = yes; then -- : -+fi -+if test -z "$ac_cv_prog_OBJDUMP"; then -+ ac_ct_OBJDUMP=$OBJDUMP -+ # Extract the first word of "objdump", so it can be a program name with args. -+set dummy objdump; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include --#if ((' ' & 0x0FF) == 0x020) --# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') --# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) --#else --# define ISLOWER(c) \ -- (('a' <= (c) && (c) <= 'i') \ -- || ('j' <= (c) && (c) <= 'r') \ -- || ('s' <= (c) && (c) <= 'z')) --# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) --#endif -- --#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) --int --main () --{ -- int i; -- for (i = 0; i < 256; i++) -- if (XOR (islower (i), ISLOWER (i)) -- || toupper (i) != TOUPPER (i)) -- exit(2); -- exit (0); --} --_ACEOF --rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- : -+ if test -n "$ac_ct_OBJDUMP"; then -+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. - else -- echo "$as_me: program exited with status $ac_status" >&5 --echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_OBJDUMP="objdump" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS - --( exit $ac_status ) --ac_cv_header_stdc=no --fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext - fi - fi -+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -+if test -n "$ac_ct_OBJDUMP"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -+$as_echo "$ac_ct_OBJDUMP" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi --echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 --echo "${ECHO_T}$ac_cv_header_stdc" >&6 --if test $ac_cv_header_stdc = yes; then -- --cat >>confdefs.h <<\_ACEOF --#define STDC_HEADERS 1 --_ACEOF - -+ if test "x$ac_ct_OBJDUMP" = x; then -+ OBJDUMP="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ OBJDUMP=$ac_ct_OBJDUMP -+ fi -+else -+ OBJDUMP="$ac_cv_prog_OBJDUMP" - fi - --# On IRIX 5.3, sys/types and inttypes.h are conflicting. -+test -z "$OBJDUMP" && OBJDUMP=objdump - - - -@@ -4697,804 +5618,610 @@ fi - - - --for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ -- inttypes.h stdint.h unistd.h --do --as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -+$as_echo_n "checking how to recognize dependent libraries... " >&6; } -+if test "${lt_cv_deplibs_check_method+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_includes_default -+ lt_cv_file_magic_cmd='$MAGIC_CMD' -+lt_cv_file_magic_test_file= -+lt_cv_deplibs_check_method='unknown' -+# Need to set the preceding variable on all platforms that support -+# interlibrary dependencies. -+# 'none' -- dependencies not supported. -+# `unknown' -- same as none, but documents that we really don't know. -+# 'pass_all' -- all dependencies passed with no checks. -+# 'test_compile' -- check by making test program. -+# 'file_magic [[regex]]' -- check by looking for files in library path -+# which responds to the $file_magic_cmd with a given extended regex. -+# If you have `file' or equivalent on your system and you're not sure -+# whether `pass_all' will *always* work, you probably want this one. - --#include <$ac_header> --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- eval "$as_ac_Header=yes" --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --eval "$as_ac_Header=no" --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 --if test `eval echo '${'$as_ac_Header'}'` = yes; then -- cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 --_ACEOF -+case $host_os in -+aix[4-9]*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - --fi -+beos*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - --done -+bsdi[45]*) -+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' -+ lt_cv_file_magic_cmd='/usr/bin/file -L' -+ lt_cv_file_magic_test_file=/shlib/libc.so -+ ;; - -+cygwin*) -+ # func_win32_libid is a shell function defined in ltmain.sh -+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' -+ lt_cv_file_magic_cmd='func_win32_libid' -+ ;; - -+mingw* | pw32*) -+ # Base MSYS/MinGW do not provide the 'file' command needed by -+ # func_win32_libid shell function, so use a weaker test based on 'objdump', -+ # unless we find 'file', for example because we are cross-compiling. -+ if ( file / ) >/dev/null 2>&1; then -+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' -+ lt_cv_file_magic_cmd='func_win32_libid' -+ else -+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' -+ lt_cv_file_magic_cmd='$OBJDUMP -f' -+ fi -+ ;; - --for ac_header in dlfcn.h --do --as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 --else -- # Is the header compilable? --echo "$as_me:$LINENO: checking $ac_header usability" >&5 --echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_includes_default --#include <$ac_header> --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_header_compiler=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+cegcc) -+ # use the weaker test based on 'objdump'. See mingw*. -+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' -+ lt_cv_file_magic_cmd='$OBJDUMP -f' -+ ;; - --ac_header_compiler=no --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 --echo "${ECHO_T}$ac_header_compiler" >&6 -+darwin* | rhapsody*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - --# Is the header present? --echo "$as_me:$LINENO: checking $ac_header presence" >&5 --echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include <$ac_header> --_ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -+freebsd* | dragonfly*) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then -+ case $host_cpu in -+ i*86 ) -+ # Not sure whether the presence of OpenBSD here was a mistake. -+ # Let's accept both of them until this is cleared up. -+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' -+ lt_cv_file_magic_cmd=/usr/bin/file -+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` -+ ;; -+ esac - else -- ac_cpp_err= -+ lt_cv_deplibs_check_method=pass_all - fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -- ac_header_preproc=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ ;; - -- ac_header_preproc=no --fi --rm -f conftest.err conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 --echo "${ECHO_T}$ac_header_preproc" >&6 -+gnu*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - --# So? What about this header? --case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in -- yes:no: ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 --echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} -- ac_header_preproc=yes -+hpux10.20* | hpux11*) -+ lt_cv_file_magic_cmd=/usr/bin/file -+ case $host_cpu in -+ ia64*) -+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' -+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; -- no:yes:* ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 --echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 --echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 --echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 --echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 --echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} -- ( -- cat <<\_ASBOX --## --------------------------------------------- ## --## Report this to the I2O RAID Utilities lists. ## --## --------------------------------------------- ## --_ASBOX -- ) | -- sed "s/^/$as_me: WARNING: /" >&2 -+ hppa*64*) -+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' -+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; --esac --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- eval "$as_ac_Header=\$ac_header_preproc" --fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+ *) -+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' -+ lt_cv_file_magic_test_file=/usr/lib/libc.sl -+ ;; -+ esac -+ ;; - --fi --if test `eval echo '${'$as_ac_Header'}'` = yes; then -- cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 --_ACEOF -+interix[3-9]*) -+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here -+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' -+ ;; - --fi -+irix5* | irix6* | nonstopux*) -+ case $LD in -+ *-32|*"-32 ") libmagic=32-bit;; -+ *-n32|*"-n32 ") libmagic=N32;; -+ *-64|*"-64 ") libmagic=64-bit;; -+ *) libmagic=never-match;; -+ esac -+ lt_cv_deplibs_check_method=pass_all -+ ;; - --done -+# This must be Linux ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - --ac_ext=cc --ac_cpp='$CXXCPP $CPPFLAGS' --ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_cxx_compiler_gnu --echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 --echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 --if test -z "$CXXCPP"; then -- if test "${ac_cv_prog_CXXCPP+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- # Double quotes because CXXCPP needs to be expanded -- for CXXCPP in "$CXX -E" "/lib/cpp" -- do -- ac_preproc_ok=false --for ac_cxx_preproc_warn_flag in '' yes --do -- # Use a header file that comes with gcc, so configuring glibc -- # with a fresh cross-compiler works. -- # Prefer to if __STDC__ is defined, since -- # exists even on freestanding compilers. -- # On the NeXT, cc -E runs the code through the compiler's parser, -- # not just through cpp. "Syntax error" is here to catch this case. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#ifdef __STDC__ --# include --#else --# include --#endif -- Syntax error --_ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_cxx_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag -+netbsd* | netbsdelf*-gnu) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then -+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else -- ac_cpp_err= -+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -- : --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ ;; - -- # Broken: fails on valid input. --continue --fi --rm -f conftest.err conftest.$ac_ext -+newos6*) -+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' -+ lt_cv_file_magic_cmd=/usr/bin/file -+ lt_cv_file_magic_test_file=/usr/lib/libnls.so -+ ;; - -- # OK, works on sane cases. Now check whether non-existent headers -- # can be detected and how. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include --_ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_cxx_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag -+*nto* | *qnx*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+openbsd*) -+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else -- ac_cpp_err= -+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -- # Broken: success on invalid input. --continue --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- -- # Passes both tests. --ac_preproc_ok=: --break --fi --rm -f conftest.err conftest.$ac_ext -+ ;; - --done --# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. --rm -f conftest.err conftest.$ac_ext --if $ac_preproc_ok; then -- break --fi -+osf3* | osf4* | osf5*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - -- done -- ac_cv_prog_CXXCPP=$CXXCPP -+rdos*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - --fi -- CXXCPP=$ac_cv_prog_CXXCPP --else -- ac_cv_prog_CXXCPP=$CXXCPP --fi --echo "$as_me:$LINENO: result: $CXXCPP" >&5 --echo "${ECHO_T}$CXXCPP" >&6 --ac_preproc_ok=false --for ac_cxx_preproc_warn_flag in '' yes --do -- # Use a header file that comes with gcc, so configuring glibc -- # with a fresh cross-compiler works. -- # Prefer to if __STDC__ is defined, since -- # exists even on freestanding compilers. -- # On the NeXT, cc -E runs the code through the compiler's parser, -- # not just through cpp. "Syntax error" is here to catch this case. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#ifdef __STDC__ --# include --#else --# include --#endif -- Syntax error --_ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_cxx_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -- : --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+solaris*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - -- # Broken: fails on valid input. --continue --fi --rm -f conftest.err conftest.$ac_ext -+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; - -- # OK, works on sane cases. Now check whether non-existent headers -- # can be detected and how. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include --_ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_cxx_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -- # Broken: success on invalid input. --continue --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+sysv4 | sysv4.3*) -+ case $host_vendor in -+ motorola) -+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' -+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` -+ ;; -+ ncr) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ sequent) -+ lt_cv_file_magic_cmd='/bin/file' -+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' -+ ;; -+ sni) -+ lt_cv_file_magic_cmd='/bin/file' -+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" -+ lt_cv_file_magic_test_file=/lib/libc.so -+ ;; -+ siemens) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ pc) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ esac -+ ;; - -- # Passes both tests. --ac_preproc_ok=: --break --fi --rm -f conftest.err conftest.$ac_ext -+tpf*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+esac - --done --# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. --rm -f conftest.err conftest.$ac_ext --if $ac_preproc_ok; then -- : --else -- { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check --See \`config.log' for more details." >&5 --echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check --See \`config.log' for more details." >&2;} -- { (exit 1); exit 1; }; } - fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -+$as_echo "$lt_cv_deplibs_check_method" >&6; } -+file_magic_cmd=$lt_cv_file_magic_cmd -+deplibs_check_method=$lt_cv_deplibs_check_method -+test -z "$deplibs_check_method" && deplibs_check_method=unknown -+ -+ -+ -+ -+ -+ -+ -+ -+ - --ac_ext=cc --ac_cpp='$CXXCPP $CPPFLAGS' --ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - --ac_ext=f --ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' --ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_f77_compiler_gnu - if test -n "$ac_tool_prefix"; then -- for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran -- do -- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. --set dummy $ac_tool_prefix$ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_F77+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -+set dummy ${ac_tool_prefix}ar; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_AR+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- if test -n "$F77"; then -- ac_cv_prog_F77="$F77" # Let the user override the test. -+ if test -n "$AR"; then -+ ac_cv_prog_AR="$AR" # Let the user override the test. - else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_F77="$ac_tool_prefix$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_AR="${ac_tool_prefix}ar" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS - - fi - fi --F77=$ac_cv_prog_F77 --if test -n "$F77"; then -- echo "$as_me:$LINENO: result: $F77" >&5 --echo "${ECHO_T}$F77" >&6 -+AR=$ac_cv_prog_AR -+if test -n "$AR"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -+$as_echo "$AR" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - -- test -n "$F77" && break -- done -+ - fi --if test -z "$F77"; then -- ac_ct_F77=$F77 -- for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran --do -- # Extract the first word of "$ac_prog", so it can be a program name with args. --set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_F77+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+if test -z "$ac_cv_prog_AR"; then -+ ac_ct_AR=$AR -+ # Extract the first word of "ar", so it can be a program name with args. -+set dummy ar; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- if test -n "$ac_ct_F77"; then -- ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. -+ if test -n "$ac_ct_AR"; then -+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. - else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_F77="$ac_prog" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_AR="ar" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS - - fi - fi --ac_ct_F77=$ac_cv_prog_ac_ct_F77 --if test -n "$ac_ct_F77"; then -- echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 --echo "${ECHO_T}$ac_ct_F77" >&6 -+ac_ct_AR=$ac_cv_prog_ac_ct_AR -+if test -n "$ac_ct_AR"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -+$as_echo "$ac_ct_AR" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - -- test -n "$ac_ct_F77" && break --done -- -- F77=$ac_ct_F77 -+ if test "x$ac_ct_AR" = x; then -+ AR="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ AR=$ac_ct_AR -+ fi -+else -+ AR="$ac_cv_prog_AR" - fi - -+test -z "$AR" && AR=ar -+test -z "$AR_FLAGS" && AR_FLAGS=cru -+ - --# Provide some information about the compiler. --echo "$as_me:5235:" \ -- "checking for Fortran 77 compiler version" >&5 --ac_compiler=`set X $ac_compile; echo $2` --{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 -- (eval $ac_compiler --version &5) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 -- (eval $ac_compiler -v &5) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 -- (eval $ac_compiler -V &5) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } --rm -f a.out -- --# If we don't use `.F' as extension, the preprocessor is not run on the --# input file. (Note that this only needs to work for GNU compilers.) --ac_save_ext=$ac_ext --ac_ext=F --echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 --echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6 --if test "${ac_cv_f77_compiler_gnu+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF -- program main --#ifndef __GNUC__ -- choke me --#endif - -- end --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_f77_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_compiler_gnu=yes -+ -+ -+ -+ -+ -+ -+ -+ -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -+set dummy ${ac_tool_prefix}strip; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_STRIP+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ if test -n "$STRIP"; then -+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_STRIP="${ac_tool_prefix}strip" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS - --ac_compiler_gnu=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --ac_cv_f77_compiler_gnu=$ac_compiler_gnu -- - fi --echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 --echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6 --ac_ext=$ac_save_ext --ac_test_FFLAGS=${FFLAGS+set} --ac_save_FFLAGS=$FFLAGS --FFLAGS= --echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 --echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6 --if test "${ac_cv_prog_f77_g+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- FFLAGS=-g --cat >conftest.$ac_ext <<_ACEOF -- program main -- -- end --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_f77_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_prog_f77_g=yes -+STRIP=$ac_cv_prog_STRIP -+if test -n "$STRIP"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -+$as_echo "$STRIP" >&6; } - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --ac_cv_prog_f77_g=no -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ - - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 --echo "${ECHO_T}$ac_cv_prog_f77_g" >&6 --if test "$ac_test_FFLAGS" = set; then -- FFLAGS=$ac_save_FFLAGS --elif test $ac_cv_prog_f77_g = yes; then -- if test "x$ac_cv_f77_compiler_gnu" = xyes; then -- FFLAGS="-g -O2" -- else -- FFLAGS="-g" -+if test -z "$ac_cv_prog_STRIP"; then -+ ac_ct_STRIP=$STRIP -+ # Extract the first word of "strip", so it can be a program name with args. -+set dummy strip; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$ac_ct_STRIP"; then -+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_STRIP="strip" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 - fi -+done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -+if test -n "$ac_ct_STRIP"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -+$as_echo "$ac_ct_STRIP" >&6; } - else -- if test "x$ac_cv_f77_compiler_gnu" = xyes; then -- FFLAGS="-O2" -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi -+ -+ if test "x$ac_ct_STRIP" = x; then -+ STRIP=":" - else -- FFLAGS= -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ STRIP=$ac_ct_STRIP - fi -+else -+ STRIP="$ac_cv_prog_STRIP" - fi - --G77=`test $ac_compiler_gnu = yes && echo yes` --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu -- -- -- --# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -+test -z "$STRIP" && STRIP=: - --# find the maximum length of command line arguments --echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 --echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 --if test "${lt_cv_sys_max_cmd_len+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- i=0 -- teststring="ABCD" - -- case $build_os in -- msdosdjgpp*) -- # On DJGPP, this test can blow up pretty badly due to problems in libc -- # (any single argument exceeding 2000 bytes causes a buffer overrun -- # during glob expansion). Even if it were fixed, the result of this -- # check would be larger than it should be. -- lt_cv_sys_max_cmd_len=12288; # 12K is about right -- ;; - -- gnu*) -- # Under GNU Hurd, this test is not required because there is -- # no limit to the length of command line arguments. -- # Libtool will interpret -1 as no limit whatsoever -- lt_cv_sys_max_cmd_len=-1; -- ;; - -- cygwin* | mingw*) -- # On Win9x/ME, this test blows up -- it succeeds, but takes -- # about 5 minutes as the teststring grows exponentially. -- # Worse, since 9x/ME are not pre-emptively multitasking, -- # you end up with a "frozen" computer, even though with patience -- # the test eventually succeeds (with a max line length of 256k). -- # Instead, let's just punt: use the minimum linelength reported by -- # all of the supported platforms: 8192 (on NT/2K/XP). -- lt_cv_sys_max_cmd_len=8192; -- ;; - -- amigaos*) -- # On AmigaOS with pdksh, this test takes hours, literally. -- # So we just punt and use a minimum line length of 8192. -- lt_cv_sys_max_cmd_len=8192; -- ;; - -- *) -- # If test is not a shell built-in, we'll probably end up computing a -- # maximum length that is only half of the actual maximum length, but -- # we can't tell. -- while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ -- = "XX$teststring") >/dev/null 2>&1 && -- new_result=`expr "X$teststring" : ".*" 2>&1` && -- lt_cv_sys_max_cmd_len=$new_result && -- test $i != 17 # 1/2 MB should be enough -- do -- i=`expr $i + 1` -- teststring=$teststring$teststring -- done -- teststring= -- # Add a significant safety factor because C++ compilers can tack on massive -- # amounts of additional arguments before passing them to the linker. -- # It appears as though 1/2 is a usable value. -- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` -- ;; -- esac -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -+set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_RANLIB+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$RANLIB"; then -+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS - - fi -- --if test -n $lt_cv_sys_max_cmd_len ; then -- echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 --echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 -+fi -+RANLIB=$ac_cv_prog_RANLIB -+if test -n "$RANLIB"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -+$as_echo "$RANLIB" >&6; } - else -- echo "$as_me:$LINENO: result: none" >&5 --echo "${ECHO_T}none" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - - -- -- --# Check for command to grab the raw symbol name followed by C symbol from nm. --echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 --echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 --if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+fi -+if test -z "$ac_cv_prog_RANLIB"; then -+ ac_ct_RANLIB=$RANLIB -+ # Extract the first word of "ranlib", so it can be a program name with args. -+set dummy ranlib; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -+ if test -n "$ac_ct_RANLIB"; then -+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_RANLIB="ranlib" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -+if test -n "$ac_ct_RANLIB"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -+$as_echo "$ac_ct_RANLIB" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi -+ -+ if test "x$ac_ct_RANLIB" = x; then -+ RANLIB=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ RANLIB=$ac_ct_RANLIB -+ fi -+else -+ RANLIB="$ac_cv_prog_RANLIB" -+fi -+ -+test -z "$RANLIB" && RANLIB=: -+ -+ -+ -+ -+ -+ -+# Determine commands to create old-style static archives. -+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -+old_postinstall_cmds='chmod 644 $oldlib' -+old_postuninstall_cmds= -+ -+if test -n "$RANLIB"; then -+ case $host_os in -+ openbsd*) -+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" -+ ;; -+ *) -+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" -+ ;; -+ esac -+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -+fi -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+# If no C compiler was specified, use CC. -+LTCC=${LTCC-"$CC"} -+ -+# If no C compiler flags were specified, use CFLAGS. -+LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -+ -+# Allow CC to be a program name with arguments. -+compiler=$CC -+ -+ -+# Check for command to grab the raw symbol name followed by C symbol from nm. -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ -+# These are sane defaults that work on at least a few old systems. -+# [They come from Ultrix. What could be older than Ultrix?!! ;)] - --# These are sane defaults that work on at least a few old systems. --# [They come from Ultrix. What could be older than Ultrix?!! ;)] -- - # Character class describing NM global symbol codes. - symcode='[BCDEGRST]' - - # Regexp to match symbols that can be accessed directly from C. - sympat='$[_A-Za-z][_A-Za-z0-9]*$' - --# Transform the above into a raw symbol and a C symbol. --symxfrm='\1 \2\3 \3' -- --# Transform an extracted symbol line into a proper C declaration --lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* $.*$$/extern int \1;/p'" -- --# Transform an extracted symbol line into symbol name and symbol address --lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode $[^ ]*$ $[^ ]*$$/ {\"\2\", (lt_ptr) \&\2},/p'" -- - # Define system-specific variables. - case $host_os in - aix*) - symcode='[BCDT]' - ;; --cygwin* | mingw* | pw32*) -+cygwin* | mingw* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; --hpux*) # Its linker distinguishes data from code symbols -+hpux*) - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' - fi -- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" -- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; - irix* | nonstopux*) - symcode='[BCDEGRST]' -@@ -5502,62 +6229,102 @@ irix* | nonstopux*) - osf*) - symcode='[BCDEGQRST]' - ;; --solaris* | sysv5*) -+solaris*) - symcode='[BDRT]' - ;; -+sco3.2v5*) -+ symcode='[DT]' -+ ;; -+sysv4.2uw2*) -+ symcode='[DT]' -+ ;; -+sysv5* | sco5v6* | unixware* | OpenUNIX*) -+ symcode='[ABDT]' -+ ;; - sysv4) - symcode='[DFNSTU]' - ;; - esac - -+# If we're using GNU nm, then use its standard symbol codes. -+case `$NM -V 2>&1` in -+*GNU* | *'with BFD'*) -+ symcode='[ABCDGIRSTW]' ;; -+esac -+ -+# Transform an extracted symbol line into a proper C declaration. -+# Some systems (esp. on ia64) link data and code symbols differently, -+# so use this general approach. -+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" -+ -+# Transform an extracted symbol line into symbol name and symbol address -+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" -+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" -+ - # Handle CRLF in mingw tool chain - opt_cr= - case $build_os in - mingw*) -- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp -+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; - esac - --# If we're using GNU nm, then use its standard symbol codes. --case `$NM -V 2>&1` in --*GNU* | *'with BFD'*) -- symcode='[ABCDGIRSTW]' ;; --esac -- --# Try without a prefix undercore, then with it. -+# Try without a prefix underscore, then with it. - for ac_symprfx in "" "_"; do - -+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. -+ symxfrm="\\1 $ac_symprfx\\2 \\2" -+ - # Write the raw and C identifiers. -- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$symcode*$[ ][ ]*$$ac_symprfx$$sympat$opt_cr$/$symxfrm/p'" -+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then -+ # Fake it for dumpbin and say T for any non-static function -+ # and D for any global variable. -+ # Also find C++ and __fastcall symbols from MSVC++, -+ # which start with @ or ?. -+ lt_cv_sys_global_symbol_pipe="$AWK '"\ -+" {last_section=section; section=\$ 3};"\ -+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -+" \$ 0!~/External *\|/{next};"\ -+" / 0+ UNDEF /{next}; / UNDEF $[^|]$*()/{next};"\ -+" {if(hide[section]) next};"\ -+" {f=0}; \$ 0~/.*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -+" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -+" ' prfx=^$ac_symprfx" -+ else -+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$symcode*$[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" -+ fi - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* -- cat > conftest.$ac_ext < conftest.$ac_ext <<_LT_EOF - #ifdef __cplusplus - extern "C" { - #endif - char nm_test_var; --void nm_test_func(){} -+void nm_test_func(void); -+void nm_test_func(void){} - #ifdef __cplusplus - } - #endif - int main(){nm_test_var='a';nm_test_func();return(0);} --EOF -+_LT_EOF - -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm -- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && test -s "$nlist"; then -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" -@@ -5566,53 +6333,55 @@ EOF - fi - - # Make sure that we snagged all the symbols we need. -- if grep ' nm_test_var$' "$nlist" >/dev/null; then -- if grep ' nm_test_func$' "$nlist" >/dev/null; then -- cat < conftest.$ac_ext -+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then -+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then -+ cat <<_LT_EOF > conftest.$ac_ext - #ifdef __cplusplus - extern "C" { - #endif - --EOF -+_LT_EOF - # Now generate the symbol file. -- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' -+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - -- cat <> conftest.$ac_ext --#if defined (__STDC__) && __STDC__ --# define lt_ptr_t void * --#else --# define lt_ptr_t char * --# define const --#endif -+ cat <<_LT_EOF >> conftest.$ac_ext - --/* The mapping between symbol names and symbols. */ -+/* The mapping between symbol names and symbols. */ - const struct { - const char *name; -- lt_ptr_t address; -+ void *address; - } --lt_preloaded_symbols[] = -+lt__PROGRAM__LTX_preloaded_symbols[] = - { --EOF -- $SED "s/^$symcode$symcode* $.*$ $.*$$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext -- cat <<\EOF >> conftest.$ac_ext -- {0, (lt_ptr_t) 0} -+ { "@PROGRAM@", (void *) 0 }, -+_LT_EOF -+ $SED "s/^$symcode$symcode* $.*$ $.*$$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext -+ cat <<\_LT_EOF >> conftest.$ac_ext -+ {0, (void *) 0} - }; - -+/* This works around a problem in FreeBSD linker */ -+#ifdef FREEBSD_WORKAROUND -+static const void *lt_preloaded_setup() { -+ return lt__PROGRAM__LTX_preloaded_symbols; -+} -+#endif -+ - #ifdef __cplusplus - } - #endif --EOF -+_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" -- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && test -s conftest${ac_exeext}; then -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" -@@ -5630,7 +6399,7 @@ EOF - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi -- rm -f conftest* conftst* -+ rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then -@@ -5646,4275 +6415,2987 @@ if test -z "$lt_cv_sys_global_symbol_pip - lt_cv_sys_global_symbol_to_cdecl= - fi - if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then -- echo "$as_me:$LINENO: result: failed" >&5 --echo "${ECHO_T}failed" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -+$as_echo "failed" >&6; } - else -- echo "$as_me:$LINENO: result: ok" >&5 --echo "${ECHO_T}ok" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -+$as_echo "ok" >&6; } - fi - --echo "$as_me:$LINENO: checking for objdir" >&5 --echo $ECHO_N "checking for objdir... $ECHO_C" >&6 --if test "${lt_cv_objdir+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- rm -f .libs 2>/dev/null --mkdir .libs 2>/dev/null --if test -d .libs; then -- lt_cv_objdir=.libs --else -- # MS-DOS does not allow filenames that begin with a dot. -- lt_cv_objdir=_libs --fi --rmdir .libs 2>/dev/null --fi --echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 --echo "${ECHO_T}$lt_cv_objdir" >&6 --objdir=$lt_cv_objdir - - - - - --case $host_os in --aix3*) -- # AIX sometimes has problems with the GCC collect2 program. For some -- # reason, if we set the COLLECT_NAMES environment variable, the problems -- # vanish in a puff of smoke. -- if test "X${COLLECT_NAMES+set}" != Xset; then -- COLLECT_NAMES= -- export COLLECT_NAMES -- fi -- ;; --esac - --# Sed substitution that helps us do robust quoting. It backslashifies --# metacharacters that are still active within double-quoted strings. --Xsed='sed -e s/^X//' --sed_quote_subst='s/$[\\"\\`$\\\\]$/\\\1/g' - --# Same as above, but do not quote variable references. --double_quote_subst='s/$[\\"\\`\\\\]$/\\\1/g' - --# Sed substitution to delay expansion of an escaped shell variable in a --# double_quote_subst'ed string. --delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - --# Sed substitution to avoid accidental globbing in evaled expressions --no_glob_subst='s/\*/\\\*/g' - --# Constants: --rm="rm -f" - --# Global variables: --default_ofile=libtool --can_build_shared=yes - --# All known linkers require a `.a' archive for static linking (except M$VC, --# which needs '.lib'). --libext=a --ltmain="$ac_aux_dir/ltmain.sh" --ofile="$default_ofile" --with_gnu_ld="$lt_cv_prog_gnu_ld" - --if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. --set dummy ${ac_tool_prefix}ar; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_AR+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$AR"; then -- ac_cv_prog_AR="$AR" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_AR="${ac_tool_prefix}ar" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done - --fi --fi --AR=$ac_cv_prog_AR --if test -n "$AR"; then -- echo "$as_me:$LINENO: result: $AR" >&5 --echo "${ECHO_T}$AR" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi - --fi --if test -z "$ac_cv_prog_AR"; then -- ac_ct_AR=$AR -- # Extract the first word of "ar", so it can be a program name with args. --set dummy ar; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_AR+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$ac_ct_AR"; then -- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_AR="ar" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done - -- test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" --fi --fi --ac_ct_AR=$ac_cv_prog_ac_ct_AR --if test -n "$ac_ct_AR"; then -- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 --echo "${ECHO_T}$ac_ct_AR" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi - -- AR=$ac_ct_AR --else -- AR="$ac_cv_prog_AR" --fi - --if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. --set dummy ${ac_tool_prefix}ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_RANLIB+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$RANLIB"; then -- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done - --fi --fi --RANLIB=$ac_cv_prog_RANLIB --if test -n "$RANLIB"; then -- echo "$as_me:$LINENO: result: $RANLIB" >&5 --echo "${ECHO_T}$RANLIB" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi - -+ -+ -+# Check whether --enable-libtool-lock was given. -+if test "${enable_libtool_lock+set}" = set; then : -+ enableval=$enable_libtool_lock; - fi --if test -z "$ac_cv_prog_RANLIB"; then -- ac_ct_RANLIB=$RANLIB -- # Extract the first word of "ranlib", so it can be a program name with args. --set dummy ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$ac_ct_RANLIB"; then -- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. --else --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_RANLIB="ranlib" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -+ -+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -+ -+# Some flags need to be propagated to the compiler or linker for good -+# libtool support. -+case $host in -+ia64-*-hpux*) -+ # Find out which ABI we are using. -+ echo 'int i;' > conftest.$ac_ext -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *ELF-32*) -+ HPUX_IA64_MODE="32" -+ ;; -+ *ELF-64*) -+ HPUX_IA64_MODE="64" -+ ;; -+ esac -+ fi -+ rm -rf conftest* -+ ;; -+*-*-irix6*) -+ # Find out which ABI we are using. -+ echo '#line 6478 "configure"' > conftest.$ac_ext -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; then -+ if test "$lt_cv_prog_gnu_ld" = yes; then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *32-bit*) -+ LD="${LD-ld} -melf32bsmip" -+ ;; -+ *N32*) -+ LD="${LD-ld} -melf32bmipn32" -+ ;; -+ *64-bit*) -+ LD="${LD-ld} -melf64bmip" -+ ;; -+ esac -+ else -+ case `/usr/bin/file conftest.$ac_objext` in -+ *32-bit*) -+ LD="${LD-ld} -32" -+ ;; -+ *N32*) -+ LD="${LD-ld} -n32" -+ ;; -+ *64-bit*) -+ LD="${LD-ld} -64" -+ ;; -+ esac -+ fi -+ fi -+ rm -rf conftest* -+ ;; -+ -+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -+s390*-*linux*|s390*-*tpf*|sparc*-*linux*) -+ # Find out which ABI we are using. -+ echo 'int i;' > conftest.$ac_ext -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; then -+ case `/usr/bin/file conftest.o` in -+ *32-bit*) -+ case $host in -+ x86_64-*kfreebsd*-gnu) -+ LD="${LD-ld} -m elf_i386_fbsd" -+ ;; -+ x86_64-*linux*) -+ LD="${LD-ld} -m elf_i386" -+ ;; -+ ppc64-*linux*|powerpc64-*linux*) -+ LD="${LD-ld} -m elf32ppclinux" -+ ;; -+ s390x-*linux*) -+ LD="${LD-ld} -m elf_s390" -+ ;; -+ sparc64-*linux*) -+ LD="${LD-ld} -m elf32_sparc" -+ ;; -+ esac -+ ;; -+ *64-bit*) -+ case $host in -+ x86_64-*kfreebsd*-gnu) -+ LD="${LD-ld} -m elf_x86_64_fbsd" -+ ;; -+ x86_64-*linux*) -+ LD="${LD-ld} -m elf_x86_64" -+ ;; -+ ppc*-*linux*|powerpc*-*linux*) -+ LD="${LD-ld} -m elf64ppc" -+ ;; -+ s390*-*linux*|s390*-*tpf*) -+ LD="${LD-ld} -m elf64_s390" -+ ;; -+ sparc*-*linux*) -+ LD="${LD-ld} -m elf64_sparc" -+ ;; -+ esac -+ ;; -+ esac -+ fi -+ rm -rf conftest* -+ ;; -+ -+*-*-sco3.2v5*) -+ # On SCO OpenServer 5, we need -belf to get full-featured binaries. -+ SAVE_CFLAGS="$CFLAGS" -+ CFLAGS="$CFLAGS -belf" -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -+$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -+if test "${lt_cv_cc_needs_belf+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu -+ -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ lt_cv_cc_needs_belf=yes -+else -+ lt_cv_cc_needs_belf=no -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+ ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu -+ -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -+$as_echo "$lt_cv_cc_needs_belf" >&6; } -+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then -+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf -+ CFLAGS="$SAVE_CFLAGS" -+ fi -+ ;; -+sparc*-*solaris*) -+ # Find out which ABI we are using. -+ echo 'int i;' > conftest.$ac_ext -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; then -+ case `/usr/bin/file conftest.o` in -+ *64-bit*) -+ case $lt_cv_prog_gnu_ld in -+ yes*) LD="${LD-ld} -m elf64_sparc" ;; -+ *) -+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then -+ LD="${LD-ld} -64" -+ fi -+ ;; -+ esac -+ ;; -+ esac -+ fi -+ rm -rf conftest* -+ ;; -+esac -+ -+need_locks="$enable_libtool_lock" -+ -+ -+ case $host_os in -+ rhapsody* | darwin*) -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$DSYMUTIL"; then -+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 - fi - done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+DSYMUTIL=$ac_cv_prog_DSYMUTIL -+if test -n "$DSYMUTIL"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -+$as_echo "$DSYMUTIL" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi -+ -+ -+fi -+if test -z "$ac_cv_prog_DSYMUTIL"; then -+ ac_ct_DSYMUTIL=$DSYMUTIL -+ # Extract the first word of "dsymutil", so it can be a program name with args. -+set dummy dsymutil; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$ac_ct_DSYMUTIL"; then -+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi - done -+ done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" - fi - fi --ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB --if test -n "$ac_ct_RANLIB"; then -- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 --echo "${ECHO_T}$ac_ct_RANLIB" >&6 -+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -+if test -n "$ac_ct_DSYMUTIL"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -+$as_echo "$ac_ct_DSYMUTIL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and +@@ -295,55 +332,69 @@ case $basic_machine in + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ +- | avr-* \ +- | bs2000-* \ ++ | avr-* | avr32-* \ ++ | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ +- | clipper-* | cydra-* \ ++ | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ +- | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ ++ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ +- | ip2k-* \ +- | m32r-* \ ++ | ip2k-* | iq2000-* \ ++ | lm32-* \ ++ | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ +- | m88110-* | m88k-* | mcore-* \ ++ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ +- | mips64vr-* | mips64vrel-* \ ++ | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ ++ | mips64r5900-* | mips64r5900el-* \ ++ | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ ++ | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ ++ | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ ++ | mmix-* \ ++ | mt-* \ + | msp430-* \ +- | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ ++ | nios-* | nios2-* \ ++ | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ +- | romp-* | rs6000-* \ +- | s390-* | s390x-* \ +- | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ ++ | romp-* | rs6000-* | rx-* \ ++ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ +- | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ +- | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ ++ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ ++ | sparclite-* \ ++ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ ++ | tile-* | tilegx-* \ + | tron-* \ ++ | ubicom32-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ +- | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ +- | xtensa-* \ ++ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ ++ | xstormy16-* | xtensa*-* \ + | ymp-* \ +- | z8k-*) ++ | z8k-* | z80-*) ++ ;; ++ # Recognize the basic CPU types without company name, with glob match. ++ xtensa*) ++ basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. +@@ -361,6 +412,9 @@ case $basic_machine in + basic_machine=a29k-amd + os=-udi + ;; ++ abacus) ++ basic_machine=abacus-unknown ++ ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout +@@ -378,6 +432,9 @@ case $basic_machine in + amd64) + basic_machine=x86_64-pc + ;; ++ amd64-*) ++ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; + amdahl) + basic_machine=580-amdahl + os=-sysv +@@ -401,6 +458,10 @@ case $basic_machine in + basic_machine=m68k-apollo + os=-bsd + ;; ++ aros) ++ basic_machine=i386-pc ++ os=-aros ++ ;; + aux) + basic_machine=m68k-apple + os=-aux +@@ -409,10 +470,26 @@ case $basic_machine in + basic_machine=ns32k-sequent + os=-dynix + ;; ++ blackfin) ++ basic_machine=bfin-unknown ++ os=-linux ++ ;; ++ blackfin-*) ++ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` ++ os=-linux ++ ;; ++ bluegene*) ++ basic_machine=powerpc-ibm ++ os=-cnk ++ ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; ++ cegcc) ++ basic_machine=arm-unknown ++ os=-cegcc ++ ;; + convex-c1) + basic_machine=c1-convex + os=-bsd +@@ -437,12 +514,27 @@ case $basic_machine in + basic_machine=j90-cray + os=-unicos + ;; ++ craynv) ++ basic_machine=craynv-cray ++ os=-unicosmp ++ ;; ++ cr16) ++ basic_machine=cr16-unknown ++ os=-elf ++ ;; + crds | unos) + basic_machine=m68k-crds + ;; ++ crisv32 | crisv32-* | etraxfs*) ++ basic_machine=crisv32-axis ++ ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; ++ crx) ++ basic_machine=crx-unknown ++ os=-elf ++ ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; +@@ -465,6 +557,14 @@ case $basic_machine in + basic_machine=m88k-motorola + os=-sysv3 + ;; ++ dicos) ++ basic_machine=i686-pc ++ os=-dicos ++ ;; ++ djgpp) ++ basic_machine=i586-pc ++ os=-msdosdjgpp ++ ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx +@@ -615,6 +715,14 @@ case $basic_machine in + basic_machine=m68k-isi + os=-sysv + ;; ++ m68knommu) ++ basic_machine=m68k-unknown ++ os=-linux ++ ;; ++ m68knommu-*) ++ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` ++ os=-linux ++ ;; + m88k-omron*) + basic_machine=m88k-omron + ;; +@@ -626,10 +734,17 @@ case $basic_machine in + basic_machine=ns32k-utek + os=-sysv + ;; ++ microblaze) ++ basic_machine=microblaze-xilinx ++ ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; ++ mingw32ce) ++ basic_machine=arm-unknown ++ os=-mingw32ce ++ ;; + miniframe) + basic_machine=m68000-convergent + ;; +@@ -643,10 +758,6 @@ case $basic_machine in + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; +- mmix*) +- basic_machine=mmix-knuth +- os=-mmixware +- ;; + monitor) + basic_machine=m68k-rom68k + os=-coff +@@ -659,6 +770,9 @@ case $basic_machine in + basic_machine=i386-pc + os=-msdos + ;; ++ ms1-*) ++ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ++ ;; + mvs) + basic_machine=i370-ibm + os=-mvs +@@ -727,10 +841,6 @@ case $basic_machine in + np1) + basic_machine=np1-gould + ;; +- nv1) +- basic_machine=nv1-cray +- os=-unicosmp +- ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; +@@ -738,9 +848,12 @@ case $basic_machine in + basic_machine=hppa1.1-oki + os=-proelf + ;; +- or32 | or32-*) ++ openrisc | openrisc-*) + basic_machine=or32-unknown +- os=-coff ++ ;; ++ os400) ++ basic_machine=powerpc-ibm ++ os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson +@@ -758,6 +871,14 @@ case $basic_machine in + basic_machine=i860-intel + os=-osf + ;; ++ parisc) ++ basic_machine=hppa-unknown ++ os=-linux ++ ;; ++ parisc-*) ++ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` ++ os=-linux ++ ;; + pbd) + basic_machine=sparc-tti + ;; +@@ -767,6 +888,12 @@ case $basic_machine in + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; ++ pc98) ++ basic_machine=i386-pc ++ ;; ++ pc98-*) ++ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; +@@ -823,6 +950,10 @@ case $basic_machine in + basic_machine=i586-unknown + os=-pw32 + ;; ++ rdos) ++ basic_machine=i386-pc ++ os=-rdos ++ ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff +@@ -833,6 +964,12 @@ case $basic_machine in + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; ++ s390 | s390-*) ++ basic_machine=s390-ibm ++ ;; ++ s390x | s390x-*) ++ basic_machine=s390x-ibm ++ ;; + sa29200) + basic_machine=a29k-amd + os=-udi +@@ -843,6 +980,10 @@ case $basic_machine in + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; ++ sde) ++ basic_machine=mipsisa32-sde ++ os=-elf ++ ;; + sei) + basic_machine=mips-sei + os=-seiux +@@ -854,6 +995,9 @@ case $basic_machine in + basic_machine=sh-hitachi + os=-hms + ;; ++ sh5el) ++ basic_machine=sh5le-unknown ++ ;; + sh64) + basic_machine=sh64-unknown + ;; +@@ -943,6 +1087,15 @@ case $basic_machine in + basic_machine=tic6x-unknown + os=-coff + ;; ++ # This must be matched before tile*. ++ tilegx*) ++ basic_machine=tilegx-unknown ++ os=-linux-gnu ++ ;; ++ tile*) ++ basic_machine=tile-unknown ++ os=-linux-gnu ++ ;; + tx39) + basic_machine=mipstx39-unknown + ;; +@@ -956,6 +1109,10 @@ case $basic_machine in + tower | tower-32) + basic_machine=m68k-ncr + ;; ++ tpf) ++ basic_machine=s390x-ibm ++ os=-tpf ++ ;; + udi29k) + basic_machine=a29k-amd + os=-udi +@@ -999,6 +1156,10 @@ case $basic_machine in + basic_machine=hppa1.1-winbond + os=-proelf + ;; ++ xbox) ++ basic_machine=i686-pc ++ os=-mingw32 ++ ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; +@@ -1010,6 +1171,10 @@ case $basic_machine in + basic_machine=z8k-unknown + os=-sim + ;; ++ z80-*-coff) ++ basic_machine=z80-unknown ++ os=-sim ++ ;; + none) + basic_machine=none-none + os=-none +@@ -1029,6 +1194,9 @@ case $basic_machine in + romp) + basic_machine=romp-ibm + ;; ++ mmix) ++ basic_machine=mmix-knuth ++ ;; + rs6000) + basic_machine=rs6000-ibm + ;; +@@ -1045,13 +1213,10 @@ case $basic_machine in + we32k) + basic_machine=we32k-att + ;; +- sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) ++ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; +- sh64) +- basic_machine=sh64-unknown +- ;; +- sparc | sparcv9 | sparcv9b) ++ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) +@@ -1098,6 +1263,9 @@ case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. ++ -auroraux) ++ os=-auroraux ++ ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; +@@ -1118,25 +1286,30 @@ case $os in + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ +- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ +- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ ++ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ ++ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ ++ | -sym* | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ +- | -aos* \ ++ | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ +- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ +- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ ++ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ ++ | -openbsd* | -solidbsd* \ ++ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ ++ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ +- | -chorusos* | -chorusrdb* \ ++ | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ +- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ ++ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ ++ | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ +- | -powermax* | -dnix* | -nx6 | -nx7 | -sei*) ++ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ ++ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) +@@ -1154,12 +1327,15 @@ case $os in + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ +- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ ++ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; ++ -linux-dietlibc) ++ os=-linux-dietlibc ++ ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; +@@ -1172,6 +1348,9 @@ case $os in + -opened*) + os=-openedition + ;; ++ -os400*) ++ os=-os400 ++ ;; + -wince*) + os=-wince + ;; +@@ -1193,6 +1372,9 @@ case $os in + -atheos*) + os=-atheos + ;; ++ -syllable*) ++ os=-syllable ++ ;; + -386bsd) + os=-bsd + ;; +@@ -1215,6 +1397,9 @@ case $os in + -sinix*) + os=-sysv4 + ;; ++ -tpf*) ++ os=-tpf ++ ;; + -triton*) + os=-sysv3 + ;; +@@ -1251,6 +1436,14 @@ case $os in + -kaos*) + os=-kaos + ;; ++ -zvmoe) ++ os=-zvmoe ++ ;; ++ -dicos*) ++ os=-dicos ++ ;; ++ -nacl*) ++ ;; + -none) + ;; + *) +@@ -1273,6 +1466,12 @@ else + # system, and we'll never get to this point. -- RANLIB=$ac_ct_RANLIB -+ if test "x$ac_ct_DSYMUTIL" = x; then -+ DSYMUTIL=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ DSYMUTIL=$ac_ct_DSYMUTIL -+ fi - else -- RANLIB="$ac_cv_prog_RANLIB" -+ DSYMUTIL="$ac_cv_prog_DSYMUTIL" - fi + case $basic_machine in ++ score-*) ++ os=-elf ++ ;; ++ spu-*) ++ os=-elf ++ ;; + *-acorn) + os=-riscix1.2 + ;; +@@ -1282,8 +1481,8 @@ case $basic_machine in + arm*-semi) + os=-aout + ;; +- c4x-* | tic4x-*) +- os=-coff ++ c4x-* | tic4x-*) ++ os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) +@@ -1310,6 +1509,9 @@ case $basic_machine in + m68*-cisco) + os=-aout + ;; ++ mep-*) ++ os=-elf ++ ;; + mips*-cisco) + os=-elf + ;; +@@ -1328,9 +1530,15 @@ case $basic_machine in + *-be) + os=-beos + ;; ++ *-haiku) ++ os=-haiku ++ ;; + *-ibm) + os=-aix + ;; ++ *-knuth) ++ os=-mmixware ++ ;; + *-wec) + os=-proelf + ;; +@@ -1433,7 +1641,7 @@ case $basic_machine in + -sunos*) + vendor=sun + ;; +- -aix*) ++ -cnk*|-aix*) + vendor=ibm + ;; + -beos*) +@@ -1463,9 +1671,15 @@ case $basic_machine in + -mvs* | -opened*) + vendor=ibm + ;; ++ -os400*) ++ vendor=ibm ++ ;; + -ptx*) + vendor=sequent + ;; ++ -tpf*) ++ vendor=ibm ++ ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; +@@ -1490,7 +1704,7 @@ case $basic_machine in + esac --if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. --set dummy ${ac_tool_prefix}strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_STRIP+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -+set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_NMEDIT+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- if test -n "$STRIP"; then -- ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -+ if test -n "$NMEDIT"; then -+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. - else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_STRIP="${ac_tool_prefix}strip" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS + echo $basic_machine$os +-exit 0 ++exit - fi - fi --STRIP=$ac_cv_prog_STRIP --if test -n "$STRIP"; then -- echo "$as_me:$LINENO: result: $STRIP" >&5 --echo "${ECHO_T}$STRIP" >&6 -+NMEDIT=$ac_cv_prog_NMEDIT -+if test -n "$NMEDIT"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -+$as_echo "$NMEDIT" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi + # Local variables: + # eval: (add-hook 'write-file-hooks 'time-stamp) +--- raidutils-0.0.6.orig/config.guess ++++ raidutils-0.0.6/config.guess +@@ -1,9 +1,10 @@ + #! /bin/sh + # Attempt to guess a canonical system name. + # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +-# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. ++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 ++# Free Software Foundation, Inc. -+ - fi --if test -z "$ac_cv_prog_STRIP"; then -- ac_ct_STRIP=$STRIP -- # Extract the first word of "strip", so it can be a program name with args. --set dummy strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+if test -z "$ac_cv_prog_NMEDIT"; then -+ ac_ct_NMEDIT=$NMEDIT -+ # Extract the first word of "nmedit", so it can be a program name with args. -+set dummy nmedit; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- if test -n "$ac_ct_STRIP"; then -- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -+ if test -n "$ac_ct_NMEDIT"; then -+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. - else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_STRIP="strip" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_NMEDIT="nmedit" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done --done -+ done -+IFS=$as_save_IFS +-timestamp='2003-06-17' ++timestamp='2009-12-30' -- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" - fi - fi --ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP --if test -n "$ac_ct_STRIP"; then -- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 --echo "${ECHO_T}$ac_ct_STRIP" >&6 -+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -+if test -n "$ac_ct_NMEDIT"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -+$as_echo "$ac_ct_NMEDIT" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi + # This file is free software; you can redistribute it and/or modify it + # under the terms of the GNU General Public License as published by +@@ -17,23 +18,25 @@ timestamp='2003-06-17' + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA ++# 02110-1301, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. -- STRIP=$ac_ct_STRIP -+ if test "x$ac_ct_NMEDIT" = x; then -+ NMEDIT=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ NMEDIT=$ac_ct_NMEDIT -+ fi - else -- STRIP="$ac_cv_prog_STRIP" -+ NMEDIT="$ac_cv_prog_NMEDIT" - fi +-# Originally written by Per Bothner . +-# Please send patches to . Submit a context +-# diff and a properly formatted ChangeLog entry. ++ ++# Originally written by Per Bothner. Please send patches (context ++# diff format) to and include a ChangeLog ++# entry. + # + # This script attempts to guess a canonical system name similar to + # config.sub. If it succeeds, it prints the system name on stdout, and + # exits with 0. Otherwise, it exits with 1. + # +-# The plan is that this can be called by configure scripts if you +-# don't specify an explicit build system type. ++# You can get the latest version of this script from: ++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -+set dummy ${ac_tool_prefix}lipo; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_LIPO+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$LIPO"; then -+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS + me=`echo "$0" | sed -e 's,.*/,,'` --old_CC="$CC" --old_CFLAGS="$CFLAGS" -+fi -+fi -+LIPO=$ac_cv_prog_LIPO -+if test -n "$LIPO"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -+$as_echo "$LIPO" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi +@@ -53,8 +56,9 @@ version="\ + GNU config.guess ($timestamp) --# Set sane defaults for various variables --test -z "$AR" && AR=ar --test -z "$AR_FLAGS" && AR_FLAGS=cru --test -z "$AS" && AS=as --test -z "$CC" && CC=cc --test -z "$LTCC" && LTCC=$CC --test -z "$DLLTOOL" && DLLTOOL=dlltool --test -z "$LD" && LD=ld --test -z "$LN_S" && LN_S="ln -s" --test -z "$MAGIC_CMD" && MAGIC_CMD=file --test -z "$NM" && NM=nm --test -z "$SED" && SED=sed --test -z "$OBJDUMP" && OBJDUMP=objdump --test -z "$RANLIB" && RANLIB=: --test -z "$STRIP" && STRIP=: --test -z "$ac_objext" && ac_objext=o + Originally written by Per Bothner. +-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +-Free Software Foundation, Inc. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, ++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free ++Software Foundation, Inc. --# Determine commands to create old-style static archives. --old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' --old_postinstall_cmds='chmod 644 $oldlib' --old_postuninstall_cmds= -+fi -+if test -z "$ac_cv_prog_LIPO"; then -+ ac_ct_LIPO=$LIPO -+ # Extract the first word of "lipo", so it can be a program name with args. -+set dummy lipo; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$ac_ct_LIPO"; then -+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_LIPO="lipo" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS + This is free software; see the source for copying conditions. There is NO + warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." +@@ -66,11 +70,11 @@ Try \`$me --help' for more information." + while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) +- echo "$timestamp" ; exit 0 ;; ++ echo "$timestamp" ; exit ;; + --version | -v ) +- echo "$version" ; exit 0 ;; ++ echo "$version" ; exit ;; + --help | --h* | -h ) +- echo "$usage"; exit 0 ;; ++ echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. +@@ -104,7 +108,7 @@ set_cc_for_build=' + trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; + trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; + : ${TMPDIR=/tmp} ; +- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || ++ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +@@ -123,7 +127,7 @@ case $CC_FOR_BUILD,$HOST_CC,$CC in + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +-esac ;' ++esac ; set_cc_for_build= ;' --if test -n "$RANLIB"; then -- case $host_os in -- openbsd*) -- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" -- ;; -- *) -- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" -- ;; -- esac -- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -+fi -+fi -+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -+if test -n "$ac_ct_LIPO"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -+$as_echo "$ac_ct_LIPO" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi + # This is needed to find uname on a Pyramid OSx when run in the BSD universe. + # (ghazi@noc.rutgers.edu 1994-08-24) +@@ -136,13 +140,6 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` | + UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown + UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown --# Only perform the check for file, if the check method requires it --case $deplibs_check_method in --file_magic*) -- if test "$file_magic_cmd" = '$MAGIC_CMD'; then -- echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 --echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 --if test "${lt_cv_path_MAGIC_CMD+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ if test "x$ac_ct_LIPO" = x; then -+ LIPO=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ LIPO=$ac_ct_LIPO -+ fi - else -- case $MAGIC_CMD in --[\\/*] | ?:[\\/]*) -- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. -- ;; --*) -- lt_save_MAGIC_CMD="$MAGIC_CMD" -- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" -- for ac_dir in $ac_dummy; do -- IFS="$lt_save_ifs" -- test -z "$ac_dir" && ac_dir=. -- if test -f $ac_dir/${ac_tool_prefix}file; then -- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" -- if test -n "$file_magic_test_file"; then -- case $deplibs_check_method in -- "file_magic "*) -- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic $.*$\"`" -- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | -- $EGREP "$file_magic_regex" > /dev/null; then -- : -- else -- cat <&2 +-## for Red Hat Linux +-if test -f /etc/redhat-release ; then +- VENDOR=redhat ; +-else +- VENDOR= ; +-fi - --*** Warning: the command libtool uses to detect shared libraries, --*** $file_magic_cmd, produces output that libtool cannot recognize. --*** The result is that libtool may fail to recognize shared libraries --*** as such. This will affect the creation of libtool libraries that --*** depend on shared libraries, but programs linked with such libtool --*** libraries will work regardless of this problem. Nevertheless, you --*** may want to report the problem to your system manager and/or to --*** bug-libtool@gnu.org -+ LIPO="$ac_cv_prog_LIPO" -+fi + # Note: order is significant - the case branches are not exclusive. + case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in +@@ -165,6 +162,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; ++ sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched +@@ -173,7 +171,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ +- | grep __ELF__ >/dev/null ++ | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? +@@ -203,50 +201,32 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" +- exit 0 ;; +- amiga:OpenBSD:*:*) +- echo m68k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- arc:OpenBSD:*:*) +- echo mipsel-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- hp300:OpenBSD:*:*) +- echo m68k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- mac68k:OpenBSD:*:*) +- echo m68k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- macppc:OpenBSD:*:*) +- echo powerpc-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- mvme68k:OpenBSD:*:*) +- echo m68k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- mvme88k:OpenBSD:*:*) +- echo m88k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- mvmeppc:OpenBSD:*:*) +- echo powerpc-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- pmax:OpenBSD:*:*) +- echo mipsel-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- sgi:OpenBSD:*:*) +- echo mipseb-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- sun3:OpenBSD:*:*) +- echo m68k-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; +- wgrisc:OpenBSD:*:*) +- echo mipsel-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:OpenBSD:*:*) +- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} +- exit 0 ;; ++ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` ++ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} ++ exit ;; ++ *:ekkoBSD:*:*) ++ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} ++ exit ;; ++ *:SolidBSD:*:*) ++ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} ++ exit ;; ++ macppc:MirBSD:*:*) ++ echo powerpc-unknown-mirbsd${UNAME_RELEASE} ++ exit ;; ++ *:MirBSD:*:*) ++ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} ++ exit ;; + alpha:OSF1:*:*) +- if test $UNAME_RELEASE = "V4.0"; then ++ case $UNAME_RELEASE in ++ *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` +- fi ++ ;; ++ *5.*) ++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ++ ;; ++ esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU +@@ -284,42 +264,49 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac ++ # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. +- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` +- exit 0 ;; +- Alpha*:OpenVMS:*:*) +- echo alpha-hp-vms +- exit 0 ;; ++ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` ++ exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix +- exit 0 ;; ++ exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 +- exit 0 ;; ++ exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 +- exit 0;; ++ exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos +- exit 0 ;; ++ exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos +- exit 0 ;; ++ exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition +- exit 0 ;; ++ exit ;; ++ *:z/VM:*:*) ++ echo s390-ibm-zvmoe ++ exit ;; ++ *:OS400:*:*) ++ echo powerpc-ibm-os400 ++ exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} +- exit 0;; ++ exit ;; ++ arm:riscos:*:*|arm:RISCOS:*:*) ++ echo arm-unknown-riscos ++ exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp +- exit 0;; ++ exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then +@@ -327,32 +314,51 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + else + echo pyramid-pyramid-bsd + fi +- exit 0 ;; ++ exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 +- exit 0 ;; ++ exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 +- exit 0 ;; +- DRS?6000:UNIX_SV:4.2*:7*) ++ exit ;; ++ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in +- sparc) echo sparc-icl-nx7 && exit 0 ;; ++ sparc) echo sparc-icl-nx7; exit ;; + esac ;; ++ s390x:SunOS:*:*) ++ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` ++ exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; +- i86pc:SunOS:5.*:*) +- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; ++ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) ++ echo i386-pc-auroraux${UNAME_RELEASE} ++ exit ;; ++ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) ++ eval $set_cc_for_build ++ SUN_ARCH="i386" ++ # If there is a compiler, see if it is configured for 64-bit objects. ++ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. ++ # This test works for both compilers. ++ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then ++ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ ++ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ ++ grep IS_64BIT_ARCH >/dev/null ++ then ++ SUN_ARCH="x86_64" ++ fi ++ fi ++ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` ++ exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) +@@ -361,10 +367,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` +- exit 0 ;; ++ exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 +@@ -376,10 +382,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac +- exit 0 ;; ++ exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor +@@ -390,37 +396,40 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ m68k:machten:*:*) ++ echo m68k-apple-machten${UNAME_RELEASE} ++ exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 +- exit 0 ;; ++ exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +@@ -444,32 +453,33 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + exit (-1); + } + EOF +- $CC_FOR_BUILD -o $dummy $dummy.c \ +- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/$[0-9]*$.*/\1/p'` \ +- && exit 0 ++ $CC_FOR_BUILD -o $dummy $dummy.c && ++ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/$[0-9]*$.*/\1/p'` && ++ SYSTEM_NAME=`$dummy $dummyarg` && ++ { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax +- exit 0 ;; ++ exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax +- exit 0 ;; ++ exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax +- exit 0 ;; ++ exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix +- exit 0 ;; ++ exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 +- exit 0 ;; ++ exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 +- exit 0 ;; ++ exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 +- exit 0 ;; ++ exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` +@@ -485,29 +495,29 @@ EOF + else + echo i586-dg-dgux${UNAME_RELEASE} + fi +- exit 0 ;; ++ exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 +- exit 0 ;; ++ exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 +- exit 0 ;; ++ exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 +- exit 0 ;; ++ exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd +- exit 0 ;; ++ exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` +- exit 0 ;; ++ exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. +- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id +- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' ++ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id ++ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix +- exit 0 ;; ++ exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` +@@ -515,7 +525,7 @@ EOF + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} +- exit 0 ;; ++ exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build +@@ -530,15 +540,19 @@ EOF + exit(0); + } + EOF +- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 +- echo rs6000-ibm-aix3.2.5 ++ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` ++ then ++ echo "$SYSTEM_NAME" ++ else ++ echo rs6000-ibm-aix3.2.5 ++ fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi +- exit 0 ;; +- *:AIX:*:[45]) ++ exit ;; ++ *:AIX:*:[456]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 +@@ -551,28 +565,28 @@ EOF + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} +- exit 0 ;; ++ exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix +- exit 0 ;; ++ exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 +- exit 0 ;; ++ exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to +- exit 0 ;; # report: romp-ibm BSD 4.3 ++ exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx +- exit 0 ;; ++ exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 +- exit 0 ;; ++ exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd +- exit 0 ;; ++ exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 +- exit 0 ;; ++ exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in +@@ -634,9 +648,19 @@ EOF + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then +- # avoid double evaluation of $set_cc_for_build +- test -n "$CC_FOR_BUILD" || eval $set_cc_for_build +- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null ++ eval $set_cc_for_build ++ ++ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating ++ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler ++ # generating 64-bit code. GNU and HP use different nomenclature: ++ # ++ # $ CC_FOR_BUILD=cc ./config.guess ++ # => hppa2.0w-hp-hpux11.23 ++ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess ++ # => hppa64-hp-hpux11.23 ++ ++ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | ++ grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else +@@ -644,11 +668,11 @@ EOF + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} +- exit 0 ;; ++ exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} +- exit 0 ;; ++ exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +@@ -676,208 +700,248 @@ EOF + exit (0); + } + EOF +- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 ++ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && ++ { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 +- exit 0 ;; ++ exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd +- exit 0 ;; ++ exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd +- exit 0 ;; ++ exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix +- exit 0 ;; ++ exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf +- exit 0 ;; ++ exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf +- exit 0 ;; ++ exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi +- exit 0 ;; ++ exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites +- exit 0 ;; ++ exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd +- exit 0 ;; ++ exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi +- exit 0 ;; ++ exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd +- exit 0 ;; ++ exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd +- exit 0 ;; ++ exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd +- exit 0 ;; ++ exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' +- exit 0 ;; ++ exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*$[A-Z]90$/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' +- exit 0 ;; ++ exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' +- exit 0 ;; ++ exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' +- exit 0 ;; ++ exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' +- exit 0 ;; ++ exit ;; + *:UNICOS/mp:*:*) +- echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' +- exit 0 ;; ++ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" +- exit 0 ;; ++ exit ;; ++ 5000:UNIX_System_V:4.*:*) ++ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` ++ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` ++ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ++ exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} +- exit 0 ;; +- *:FreeBSD:*:*|*:GNU/FreeBSD:*:*) +- # Determine whether the default compiler uses glibc. +- eval $set_cc_for_build +- sed 's/^ //' << EOF >$dummy.c +- #include +- #if __GLIBC__ >= 2 +- LIBC=gnu +- #else +- LIBC= +- #endif -EOF -- fi ;; +- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` +- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} +- exit 0 ;; ++ exit ;; ++ *:FreeBSD:*:*) ++ case ${UNAME_MACHINE} in ++ pc98) ++ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; ++ amd64) ++ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; ++ *) ++ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; ++ esac ++ exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin +- exit 0 ;; +- i*:MINGW*:*) ++ exit ;; ++ *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 +- exit 0 ;; ++ exit ;; ++ i*:windows32*:*) ++ # uname -m includes "-pc" on this system. ++ echo ${UNAME_MACHINE}-mingw32 ++ exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 +- exit 0 ;; +- x86:Interix*:[34]*) +- echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' +- exit 0 ;; ++ exit ;; ++ *:Interix*:*) ++ case ${UNAME_MACHINE} in ++ x86) ++ echo i586-pc-interix${UNAME_RELEASE} ++ exit ;; ++ authenticamd | genuineintel | EM64T) ++ echo x86_64-unknown-interix${UNAME_RELEASE} ++ exit ;; ++ IA64) ++ echo ia64-unknown-interix${UNAME_RELEASE} ++ exit ;; ++ esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks +- exit 0 ;; ++ exit ;; ++ 8664:Windows_NT:*) ++ echo x86_64-pc-mks ++ exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix +- exit 0 ;; ++ exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin +- exit 0 ;; ++ exit ;; ++ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) ++ echo x86_64-unknown-cygwin ++ exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin +- exit 0 ;; ++ exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + *:GNU:*:*) ++ # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` +- exit 0 ;; ++ exit ;; ++ *:GNU/*:*:*) ++ # other systems with GNU libc and userland ++ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu ++ exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix +- exit 0 ;; ++ exit ;; ++ alpha:Linux:*:*) ++ case `sed -n '/^cpu model/s/^.*: $.*$/\1/p' < /proc/cpuinfo` in ++ EV5) UNAME_MACHINE=alphaev5 ;; ++ EV56) UNAME_MACHINE=alphaev56 ;; ++ PCA56) UNAME_MACHINE=alphapca56 ;; ++ PCA57) UNAME_MACHINE=alphapca56 ;; ++ EV6) UNAME_MACHINE=alphaev6 ;; ++ EV67) UNAME_MACHINE=alphaev67 ;; ++ EV68*) UNAME_MACHINE=alphaev68 ;; ++ esac ++ objdump --private-headers /bin/sh | grep -q ld.so.1 ++ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi ++ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ++ exit ;; + arm*:Linux:*:*) ++ eval $set_cc_for_build ++ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ ++ | grep -q __ARM_EABI__ ++ then ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ else ++ echo ${UNAME_MACHINE}-unknown-linux-gnueabi ++ fi ++ exit ;; ++ avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu +- exit 0 ;; ++ exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu +- exit 0 ;; +- ia64:Linux:*:*) +- echo ${UNAME_MACHINE}-${VENDOR:-unknown}-linux-gnu +- exit 0 ;; +- m68*:Linux:*:*) +- echo ${UNAME_MACHINE}-unknown-linux-gnu +- exit 0 ;; +- mips:Linux:*:*) ++ exit ;; ++ crisv32:Linux:*:*) ++ echo crisv32-axis-linux-gnu ++ exit ;; ++ frv:Linux:*:*) ++ echo frv-unknown-linux-gnu ++ exit ;; ++ i*86:Linux:*:*) ++ LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +- #undef CPU +- #undef mips +- #undef mipsel +- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) +- CPU=mipsel +- #else +- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) +- CPU=mips +- #else +- CPU= +- #endif ++ #ifdef __dietlibc__ ++ LIBC=dietlibc + #endif + EOF +- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` +- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 +- ;; +- mips64:Linux:*:*) ++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` ++ echo "${UNAME_MACHINE}-pc-linux-${LIBC}" ++ exit ;; ++ ia64:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ m32r*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ m68*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU +- #undef mips64 +- #undef mips64el ++ #undef ${UNAME_MACHINE} ++ #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) +- CPU=mips64el ++ CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) +- CPU=mips64 ++ CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif + EOF +- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` +- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` ++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; +- ppc:Linux:*:*) +- echo powerpc-${VENDOR:-unknown}-linux-gnu +- exit 0 ;; +- ppc64:Linux:*:*) +- echo powerpc64-${VENDOR:-unknown}-linux-gnu +- exit 0 ;; +- alpha:Linux:*:*) +- case `sed -n '/^cpu model/s/^.*: $.*$/\1/p' < /proc/cpuinfo` in +- EV5) UNAME_MACHINE=alphaev5 ;; +- EV56) UNAME_MACHINE=alphaev56 ;; +- PCA56) UNAME_MACHINE=alphapca56 ;; +- PCA57) UNAME_MACHINE=alphapca56 ;; +- EV6) UNAME_MACHINE=alphaev6 ;; +- EV67) UNAME_MACHINE=alphaev67 ;; +- EV68*) UNAME_MACHINE=alphaev68 ;; +- esac +- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null +- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi +- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} +- exit 0 ;; ++ or32:Linux:*:*) ++ echo or32-unknown-linux-gnu ++ exit ;; ++ padre:Linux:*:*) ++ echo sparc-unknown-linux-gnu ++ exit ;; ++ parisc64:Linux:*:* | hppa64:Linux:*:*) ++ echo hppa64-unknown-linux-gnu ++ exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in +@@ -885,84 +949,40 @@ EOF + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac +- exit 0 ;; +- parisc64:Linux:*:* | hppa64:Linux:*:*) +- echo hppa64-unknown-linux-gnu +- exit 0 ;; ++ exit ;; ++ ppc64:Linux:*:*) ++ echo powerpc64-unknown-linux-gnu ++ exit ;; ++ ppc:Linux:*:*) ++ echo powerpc-unknown-linux-gnu ++ exit ;; + s390:Linux:*:* | s390x:Linux:*:*) +- echo ${UNAME_MACHINE}-${VENDOR:-ibm}-linux-gnu +- exit 0 ;; ++ echo ${UNAME_MACHINE}-ibm-linux ++ exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu +- exit 0 ;; ++ exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu +- exit 0 ;; ++ exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu +- exit 0 ;; ++ exit ;; ++ vax:Linux:*:*) ++ echo ${UNAME_MACHINE}-dec-linux-gnu ++ exit ;; + x86_64:Linux:*:*) +- echo x86_64-${VENDOR:-unknown}-linux-gnu +- exit 0 ;; +- i*86:Linux:*:*) +- # The BFD linker knows what the default object file format is, so +- # first see if it will tell us. cd to the root directory to prevent +- # problems with other programs or directories called `ld' in the path. +- # Set LC_ALL=C to ensure ld outputs messages in English. +- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ +- | sed -ne '/supported targets:/!d +- s/[ ][ ]*/ /g +- s/.*supported targets: *// +- s/ .*// +- p'` +- case "$ld_supported_targets" in +- elf32-i386) +- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" +- ;; +- a.out-i386-linux) +- echo "${UNAME_MACHINE}-pc-linux-gnuaout" +- exit 0 ;; +- coff-i386) +- echo "${UNAME_MACHINE}-pc-linux-gnucoff" +- exit 0 ;; +- "") +- # Either a pre-BFD a.out linker (linux-gnuoldld) or +- # one that does not give us useful --help. +- echo "${UNAME_MACHINE}-pc-linux-gnuoldld" +- exit 0 ;; - esac -- fi -- break -- fi -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -+set dummy ${ac_tool_prefix}otool; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_OTOOL+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$OTOOL"; then -+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done - done -- IFS="$lt_save_ifs" -- MAGIC_CMD="$lt_save_MAGIC_CMD" -- ;; --esac --fi -+IFS=$as_save_IFS - --MAGIC_CMD="$lt_cv_path_MAGIC_CMD" --if test -n "$MAGIC_CMD"; then -- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 --echo "${ECHO_T}$MAGIC_CMD" >&6 -+fi -+fi -+OTOOL=$ac_cv_prog_OTOOL -+if test -n "$OTOOL"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -+$as_echo "$OTOOL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi - --if test -z "$lt_cv_path_MAGIC_CMD"; then -- if test -n "$ac_tool_prefix"; then -- echo "$as_me:$LINENO: checking for file" >&5 --echo $ECHO_N "checking for file... $ECHO_C" >&6 --if test "${lt_cv_path_MAGIC_CMD+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ -+fi -+if test -z "$ac_cv_prog_OTOOL"; then -+ ac_ct_OTOOL=$OTOOL -+ # Extract the first word of "otool", so it can be a program name with args. -+set dummy otool; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- case $MAGIC_CMD in --[\\/*] | ?:[\\/]*) -- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. -- ;; --*) -- lt_save_MAGIC_CMD="$MAGIC_CMD" -- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" -- for ac_dir in $ac_dummy; do -- IFS="$lt_save_ifs" -- test -z "$ac_dir" && ac_dir=. -- if test -f $ac_dir/file; then -- lt_cv_path_MAGIC_CMD="$ac_dir/file" -- if test -n "$file_magic_test_file"; then -- case $deplibs_check_method in -- "file_magic "*) -- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic $.*$\"`" -- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | -- $EGREP "$file_magic_regex" > /dev/null; then -- : -- else -- cat <&2 -+ if test -n "$ac_ct_OTOOL"; then -+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_OTOOL="otool" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS - --*** Warning: the command libtool uses to detect shared libraries, --*** $file_magic_cmd, produces output that libtool cannot recognize. --*** The result is that libtool may fail to recognize shared libraries --*** as such. This will affect the creation of libtool libraries that --*** depend on shared libraries, but programs linked with such libtool --*** libraries will work regardless of this problem. Nevertheless, you --*** may want to report the problem to your system manager and/or to --*** bug-libtool@gnu.org -+fi -+fi -+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -+if test -n "$ac_ct_OTOOL"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -+$as_echo "$ac_ct_OTOOL" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi - +- # Determine whether the default compiler is a.out or elf +- eval $set_cc_for_build +- sed 's/^ //' << EOF >$dummy.c +- #include +- #ifdef __ELF__ +- # ifdef __GLIBC__ +- # if __GLIBC__ >= 2 +- LIBC=gnu +- # else +- LIBC=gnulibc1 +- # endif +- # else +- LIBC=gnulibc1 +- # endif +- #else +- #ifdef __INTEL_COMPILER +- LIBC=gnu +- #else +- LIBC=gnuaout +- #endif +- #endif -EOF -- fi ;; -- esac -- fi -- break -- fi -- done -- IFS="$lt_save_ifs" -- MAGIC_CMD="$lt_save_MAGIC_CMD" -- ;; -+ if test "x$ac_ct_OTOOL" = x; then -+ OTOOL=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; +- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` +- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-${VENDOR:-pc}-linux-${LIBC}" && exit 0 +- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 +- ;; ++ echo x86_64-unknown-linux-gnu ++ exit ;; ++ xtensa*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 +- exit 0 ;; ++ exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... +@@ -970,24 +990,27 @@ EOF + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} +- exit 0 ;; ++ exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx +- exit 0 ;; ++ exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop +- exit 0 ;; ++ exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos +- exit 0 ;; +- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) ++ exit ;; ++ i*86:syllable:*:*) ++ echo ${UNAME_MACHINE}-pc-syllable ++ exit ;; ++ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp +- exit 0 ;; ++ exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then +@@ -995,15 +1018,16 @@ EOF + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi +- exit 0 ;; +- i*86:*:5:[78]*) ++ exit ;; ++ i*86:*:5:[678]*) ++ # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} +- exit 0 ;; ++ exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi +- exit 0 ;; ++ exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv +- exit 0 ;; ++ exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv +- exit 0 ;; ++ exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix +- exit 0 ;; +- M68*:*:R3V[567]*:*) +- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; +- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) ++ exit ;; ++ M68*:*:R3V[5678]*:*) ++ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; ++ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* $[0-9][0-9]$.*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ +- && echo i486-ncr-sysv4.3${OS_REL} && exit 0 ++ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ +- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; ++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ +- && echo i486-ncr-sysv4 && exit 0 ;; ++ && { echo i486-ncr-sysv4; exit; } ;; ++ NCR*:*:4.2:* | MPRAS*:*:4.2:*) ++ OS_REL='.3' ++ test -r /etc/.relid \ ++ && OS_REL=.`sed -n 's/[^ ]* [^ ]* $[0-9][0-9]$.*/\1/p' < /etc/.relid` ++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ ++ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } ++ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ ++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ++ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ ++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 +- exit 0 ;; ++ exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; +- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) ++ exit ;; ++ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 +- exit 0 ;; ++ exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 +- exit 0 ;; ++ exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` +@@ -1095,68 +1132,94 @@ EOF + else + echo ns32k-sni-sysv + fi +- exit 0 ;; ++ exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 +- exit 0 ;; ++ exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 +- exit 0 ;; ++ exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 +- exit 0 ;; ++ exit ;; ++ i*86:VOS:*:*) ++ # From Paul.Green@stratus.com. ++ echo ${UNAME_MACHINE}-stratus-vos ++ exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos +- exit 0 ;; ++ exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 +- exit 0 ;; ++ exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi +- exit 0 ;; ++ exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos +- exit 0 ;; ++ exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos +- exit 0 ;; ++ exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos +- exit 0 ;; ++ exit ;; ++ BePC:Haiku:*:*) # Haiku running on Intel PC compatible. ++ echo i586-pc-haiku ++ exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ SX-7:SUPER-UX:*:*) ++ echo sx7-nec-superux${UNAME_RELEASE} ++ exit ;; ++ SX-8:SUPER-UX:*:*) ++ echo sx8-nec-superux${UNAME_RELEASE} ++ exit ;; ++ SX-8R:SUPER-UX:*:*) ++ echo sx8r-nec-superux${UNAME_RELEASE} ++ exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:Darwin:*:*) +- case `uname -p` in +- *86) UNAME_PROCESSOR=i686 ;; +- powerpc) UNAME_PROCESSOR=powerpc ;; ++ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown ++ case $UNAME_PROCESSOR in ++ i386) ++ eval $set_cc_for_build ++ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then ++ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ ++ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ ++ grep IS_64BIT_ARCH >/dev/null ++ then ++ UNAME_PROCESSOR="x86_64" ++ fi ++ fi ;; ++ unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then +@@ -1164,22 +1227,25 @@ EOF + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:QNX:*:4*) + echo i386-pc-qnx +- exit 0 ;; +- NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) ++ exit ;; ++ NSE-?:NONSTOP_KERNEL:*:*) ++ echo nse-tandem-nsk${UNAME_RELEASE} ++ exit ;; ++ NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux +- exit 0 ;; ++ exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv +- exit 0 ;; ++ exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 +@@ -1190,28 +1256,50 @@ EOF + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 +- exit 0 ;; ++ exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 +- exit 0 ;; ++ exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex +- exit 0 ;; ++ exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 +- exit 0 ;; ++ exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 +- exit 0 ;; ++ exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 +- exit 0 ;; ++ exit ;; + *:ITS:*:*) + echo pdp10-unknown-its +- exit 0 ;; ++ exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ *:DragonFly:*:*) ++ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ++ exit ;; ++ *:*VMS:*:*) ++ UNAME_MACHINE=`(uname -p) 2>/dev/null` ++ case "${UNAME_MACHINE}" in ++ A*) echo alpha-dec-vms ; exit ;; ++ I*) echo ia64-dec-vms ; exit ;; ++ V*) echo vax-dec-vms ; exit ;; ++ esac ;; ++ *:XENIX:*:SysV) ++ echo i386-pc-xenix ++ exit ;; ++ i*86:skyos:*:*) ++ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' ++ exit ;; ++ i*86:rdos:*:*) ++ echo ${UNAME_MACHINE}-pc-rdos ++ exit ;; ++ i*86:AROS:*:*) ++ echo ${UNAME_MACHINE}-pc-aros ++ exit ;; esac -+ OTOOL=$ac_ct_OTOOL -+ fi -+else -+ OTOOL="$ac_cv_prog_OTOOL" - fi - --MAGIC_CMD="$lt_cv_path_MAGIC_CMD" --if test -n "$MAGIC_CMD"; then -- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 --echo "${ECHO_T}$MAGIC_CMD" >&6 -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -+set dummy ${ac_tool_prefix}otool64; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_OTOOL64+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$OTOOL64"; then -+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+OTOOL64=$ac_cv_prog_OTOOL64 -+if test -n "$OTOOL64"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -+$as_echo "$OTOOL64" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi -- else -- MAGIC_CMD=: -+ -+fi -+if test -z "$ac_cv_prog_OTOOL64"; then -+ ac_ct_OTOOL64=$OTOOL64 -+ # Extract the first word of "otool64", so it can be a program name with args. -+set dummy otool64; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$ac_ct_OTOOL64"; then -+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_OTOOL64="otool64" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 - fi -+done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -+if test -n "$ac_ct_OTOOL64"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -+$as_echo "$ac_ct_OTOOL64" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi + #echo '(No uname command or uname output not recognized.)' 1>&2 +@@ -1243,7 +1331,7 @@ main () + #endif -- fi -- ;; -+ if test "x$ac_ct_OTOOL64" = x; then -+ OTOOL64=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; - esac -+ OTOOL64=$ac_ct_OTOOL64 -+ fi -+else -+ OTOOL64="$ac_cv_prog_OTOOL64" -+fi + #if defined (__arm) && defined (__acorn) && defined (__unix) +- printf ("arm-acorn-riscix"); exit (0); ++ printf ("arm-acorn-riscix\n"); exit (0); + #endif --enable_dlopen=no --enable_win32_dll=no + #if defined (hp300) && !defined (hpux) +@@ -1332,11 +1420,12 @@ main () + } + EOF --# Check whether --enable-libtool-lock or --disable-libtool-lock was given. --if test "${enable_libtool_lock+set}" = set; then -- enableval="$enable_libtool_lock" +-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 ++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && ++ { echo "$SYSTEM_NAME"; exit; } --fi; --test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + # Apollos put the system type in the environment. +-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } ++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } --# Check whether --with-pic or --without-pic was given. --if test "${with_pic+set}" = set; then -- withval="$with_pic" -- pic_mode="$withval" --else -- pic_mode=default --fi; --test -z "$pic_mode" && pic_mode=default + # Convex versions that predate uname can use getsysinfo(1) --# Use C for the default configuration in the libtool script --tagname= --lt_save_CC="$CC" --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu +@@ -1345,22 +1434,22 @@ then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd +- exit 0 ;; ++ exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi +- exit 0 ;; ++ exit ;; + c34*) + echo c34-convex-bsd +- exit 0 ;; ++ exit ;; + c38*) + echo c38-convex-bsd +- exit 0 ;; ++ exit ;; + c4*) + echo c4-convex-bsd +- exit 0 ;; ++ exit ;; + esac + fi +@@ -1371,7 +1460,9 @@ This script, last modified $timestamp, h + the operating system you are using. It is advised that you + download the most up to date version of the config scripts from --# Source file extension for C test sources. --ac_ext=c +- ftp://ftp.gnu.org/pub/gnu/config/ ++ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD ++and ++ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD --# Object file extension for compiled C test sources. --objext=o --objext=$objext + If the version you run ($0) is already up to date, please + send the following data and any information you think might be +--- raidutils-0.0.6.orig/Makefile.am ++++ raidutils-0.0.6/Makefile.am +@@ -1 +1,2 @@ + SUBDIRS=lib raidutil raideng ++ACLOCAL_AMFLAGS=-I m4 +--- raidutils-0.0.6.orig/configure.in ++++ raidutils-0.0.6/configure.in +@@ -1,17 +1,18 @@ + # -*- Autoconf -*- + # Process this file with autoconf to produce a configure script. --# Code to be used in simple compile tests --lt_simple_compile_test_code="int some_variable = 0;\n" +-AC_PREREQ(2.59) +-AC_INIT([I2O RAID Utilities], 0.0.6) ++AC_PREREQ([2.67]) ++AC_INIT([I2O RAID Utilities],[0.0.6]) + AC_CONFIG_SRCDIR([config.h.in]) +-AM_CONFIG_HEADER([config.h]) ++AC_CONFIG_HEADERS([config.h]) ++AC_CONFIG_MACRO_DIR([m4]) + AM_INIT_AUTOMAKE --# Code to be used in simple link tests --lt_simple_link_test_code='int main(){return(0);}\n' + # Checks for programs. + AC_PROG_CXX + AC_PROG_CC + AC_PROG_CPP +-AC_PROG_LIBTOOL ++LT_INIT + # Checks for libraries. --# If no C compiler was specified, use CC. --LTCC=${LTCC-"$CC"} +@@ -42,11 +43,13 @@ AC_PROG_GCC_TRADITIONAL + AC_FUNC_MALLOC + AC_FUNC_MEMCMP + AC_FUNC_REALLOC +-AC_TYPE_SIGNAL ++ + AC_FUNC_STAT + AC_FUNC_VPRINTF + AC_CHECK_FUNCS([alarm atexit dup2 memset strchr strcspn strpbrk strrchr strspn strstr strtol strtoul sysinfo uname]) --# Allow CC to be a program name with arguments. --compiler=$CC ++AM_PROG_CC_C_O ++ + AC_CONFIG_FILES([Makefile + raideng/Makefile + raidutil/Makefile +--- raidutils-0.0.6.orig/aclocal.m4 ++++ raidutils-0.0.6/aclocal.m4 +@@ -1,7 +1,7 @@ +-# generated automatically by aclocal 1.9.2 -*- Autoconf -*- ++# generated automatically by aclocal 1.11.1 -*- Autoconf -*- +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 +-# Free Software Foundation, Inc. ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, ++# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -11,103 +11,196 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. --# --# Check for any special shared library compilation flags. --# --lt_prog_cc_shlib= --if test "$GCC" = no; then -- case $host_os in -- sco3.2v5*) -- lt_prog_cc_shlib='-belf' -- ;; -- esac --fi --if test -n "$lt_prog_cc_shlib"; then -- { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5 --echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;} -- if echo "$old_CC $old_CFLAGS " | grep "[ ]$lt_prog_cc_shlib[ ]" >/dev/null; then : -- else -- { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 --echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} -- lt_cv_prog_cc_can_build_shared=no -- fi --fi ++m4_ifndef([AC_AUTOCONF_VERSION], ++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl ++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],, ++[m4_warning([this file was generated for autoconf 2.67. ++You have another version of autoconf. It may work, but is not guaranteed to. ++If you have problems, you may need to regenerate the build system entirely. ++To do so, use the procedure documented by the package, typically `autoreconf'.])]) ++ + # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++m4_define([_LT_COPYING], [dnl ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is part of GNU Libtool. ++# ++# GNU Libtool is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or ++# obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++]) +-# serial 47 AC_PROG_LIBTOOL ++# serial 56 LT_INIT --# --# Check to make sure the static flag actually works. --# --echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5 --echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6 --if test "${lt_prog_compiler_static_works+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- lt_prog_compiler_static_works=no -- save_LDFLAGS="$LDFLAGS" -- LDFLAGS="$LDFLAGS $lt_prog_compiler_static" -- printf "$lt_simple_link_test_code" > conftest.$ac_ext -- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test -s conftest.err; then -- # Append any errors to the config.log. -- cat conftest.err 1>&5 -- else -- lt_prog_compiler_static_works=yes -- fi -- fi -- $rm conftest* -- LDFLAGS="$save_LDFLAGS" --fi --echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 --echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 +-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +-# ----------------------------------------------------------- +-# If this macro is not defined by Autoconf, define it here. +-m4_ifdef([AC_PROVIDE_IFELSE], +- [], +- [m4_define([AC_PROVIDE_IFELSE], +- [m4_ifdef([AC_PROVIDE_$1], +- [$2], [$3])])]) ++# LT_PREREQ(VERSION) ++# ------------------ ++# Complain and exit if this libtool version is less that VERSION. ++m4_defun([LT_PREREQ], ++[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, ++ [m4_default([$3], ++ [m4_fatal([Libtool version $1 or higher is required], ++ 63)])], ++ [$2])]) --if test x"$lt_prog_compiler_static_works" = xyes; then -- : --else -- lt_prog_compiler_static= --fi +-# AC_PROG_LIBTOOL +-# --------------- +-AC_DEFUN([AC_PROG_LIBTOOL], +-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. +- AC_PROVIDE_IFELSE([AC_PROG_CXX], +- [AC_LIBTOOL_CXX], +- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX +- ])]) +-dnl And a similar setup for Fortran 77 support +- AC_PROVIDE_IFELSE([AC_PROG_F77], +- [AC_LIBTOOL_F77], +- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +-])]) +- +-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. +- AC_PROVIDE_IFELSE([AC_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [ifdef([AC_PROG_GCJ], +- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) +- ifdef([A][M_PROG_GCJ], +- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) +- ifdef([LT_AC_PROG_GCJ], +- [define([LT_AC_PROG_GCJ], +- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +-])])# AC_PROG_LIBTOOL ++# _LT_CHECK_BUILDDIR ++# ------------------ ++# Complain if the absolute build directory name contains unusual characters ++m4_defun([_LT_CHECK_BUILDDIR], ++[case `pwd` in ++ *\ * | *\ *) ++ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; ++esac ++]) +-# _AC_PROG_LIBTOOL +-# ---------------- +-AC_DEFUN([_AC_PROG_LIBTOOL], +-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl ++# LT_INIT([OPTIONS]) ++# ------------------ ++AC_DEFUN([LT_INIT], ++[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT ++AC_BEFORE([$0], [LT_LANG])dnl ++AC_BEFORE([$0], [LT_OUTPUT])dnl ++AC_BEFORE([$0], [LTDL_INIT])dnl ++m4_require([_LT_CHECK_BUILDDIR])dnl ++ ++dnl Autoconf doesn't catch unexpanded LT_ macros by default: ++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl ++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl ++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 ++dnl unless we require an AC_DEFUNed macro: ++AC_REQUIRE([LTOPTIONS_VERSION])dnl ++AC_REQUIRE([LTSUGAR_VERSION])dnl ++AC_REQUIRE([LTVERSION_VERSION])dnl ++AC_REQUIRE([LTOBSOLETE_VERSION])dnl ++m4_require([_LT_PROG_LTMAIN])dnl ++ ++dnl Parse OPTIONS ++_LT_SET_OPTIONS([$0], [$1]) --lt_prog_compiler_no_builtin_flag= + # This can be used to rebuild libtool when needed +-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" ++LIBTOOL_DEPS="$ltmain" --if test "$GCC" = yes; then -- lt_prog_compiler_no_builtin_flag=' -fno-builtin' + # Always use our own libtool. + LIBTOOL='$(SHELL) $(top_builddir)/libtool' + AC_SUBST(LIBTOOL)dnl +-# Prevent multiple expansion +-define([AC_PROG_LIBTOOL], []) +-])# _AC_PROG_LIBTOOL ++_LT_SETUP --echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 --echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 --if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -+$as_echo_n "checking for -single_module linker flag... " >&6; } -+if test "${lt_cv_apple_cc_single_mod+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- lt_cv_prog_compiler_rtti_exceptions=no -- ac_outfile=conftest.$ac_objext -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -- lt_compiler_flag="-fno-rtti -fno-exceptions" -- # Insert the option either (1) after the last *FLAGS variable, or -- # (2) before a word containing "conftest.", or (3) at the end. -- # Note that $ac_compile itself does not contain backslashes and begins -- # with a dollar sign (not a hyphen), so the echo should work correctly. -- # The option is referenced via a variable to avoid confusing sed. -- lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -- -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:6269: $lt_compile\"" >&5) -- (eval "$lt_compile" 2>conftest.err) -- ac_status=$? -- cat conftest.err >&5 -- echo "$as_me:6273: \$? = $ac_status" >&5 -- if (exit $ac_status) && test -s "$ac_outfile"; then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s conftest.err; then -- lt_cv_prog_compiler_rtti_exceptions=yes -- fi -- fi -- $rm conftest* -- -+ lt_cv_apple_cc_single_mod=no -+ if test -z "${LT_MULTI_MODULE}"; then -+ # By default we will add the -single_module flag. You can override -+ # by either setting the environment variable LT_MULTI_MODULE -+ # non-empty at configure time, or by adding -multi_module to the -+ # link flags. -+ rm -rf libconftest.dylib* -+ echo "int foo(void){return 1;}" > conftest.c -+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -+-dynamiclib -Wl,-single_module conftest.c" >&5 -+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err -+ _lt_result=$? -+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then -+ lt_cv_apple_cc_single_mod=yes -+ else -+ cat conftest.err >&5 -+ fi -+ rm -rf libconftest.dylib* -+ rm -f conftest.* -+ fi - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -+$as_echo "$lt_cv_apple_cc_single_mod" >&6; } -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_ld_exported_symbols_list=no -+ save_LDFLAGS=$LDFLAGS -+ echo "_main" > conftest.sym -+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ ++# Only expand once: ++m4_define([LT_INIT]) ++])# LT_INIT --if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then -- lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -+int -+main () -+{ +-# AC_LIBTOOL_SETUP +-# ---------------- +-AC_DEFUN([AC_LIBTOOL_SETUP], +-[AC_PREREQ(2.50)dnl +-AC_REQUIRE([AC_ENABLE_SHARED])dnl +-AC_REQUIRE([AC_ENABLE_STATIC])dnl +-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +-AC_REQUIRE([AC_CANONICAL_HOST])dnl ++# Old names: ++AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) ++AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_PROG_LIBTOOL], []) ++dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ lt_cv_ld_exported_symbols_list=yes - else -- : -+ lt_cv_ld_exported_symbols_list=no - fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+ LDFLAGS="$save_LDFLAGS" - - fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } -+ case $host_os in -+ rhapsody* | darwin1.[012]) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; -+ darwin1.*) -+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; -+ darwin*) # darwin 5.x on -+ # if running on 10.5 or later, the deployment target defaults -+ # to the OS version, if on x86, and 10.4, the deployment -+ # target defaults to 10.4. Don't you love it? -+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in -+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; -+ 10.[012]*) -+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; -+ 10.*) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; -+ esac -+ ;; -+ esac -+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then -+ _lt_dar_single_mod='$single_module' -+ fi -+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then -+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' -+ else -+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' -+ fi -+ if test "$DSYMUTIL" != ":"; then -+ _lt_dsymutil='~$DSYMUTIL $lib || :' -+ else -+ _lt_dsymutil= -+ fi -+ ;; ++ ++# _LT_CC_BASENAME(CC) ++# ------------------- ++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. ++m4_defun([_LT_CC_BASENAME], ++[for cc_temp in $1""; do ++ case $cc_temp in ++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; ++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; ++ \-*) ;; ++ *) break;; + esac ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++]) ++ ++ ++# _LT_FILEUTILS_DEFAULTS ++# ---------------------- ++# It is okay to use these file commands and assume they have been set ++# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. ++m4_defun([_LT_FILEUTILS_DEFAULTS], ++[: ${CP="cp -f"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++])# _LT_FILEUTILS_DEFAULTS ++ ++ ++# _LT_SETUP ++# --------- ++m4_defun([_LT_SETUP], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl + AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++_LT_DECL([], [host_alias], [0], [The host system])dnl ++_LT_DECL([], [host], [0])dnl ++_LT_DECL([], [host_os], [0])dnl ++dnl ++_LT_DECL([], [build_alias], [0], [The build system])dnl ++_LT_DECL([], [build], [0])dnl ++_LT_DECL([], [build_os], [0])dnl ++dnl + AC_REQUIRE([AC_PROG_CC])dnl +-AC_REQUIRE([AC_PROG_LD])dnl +-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +-AC_REQUIRE([AC_PROG_NM])dnl +- ++AC_REQUIRE([LT_PATH_LD])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++dnl + AC_REQUIRE([AC_PROG_LN_S])dnl +-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +-AC_REQUIRE([AC_OBJEXT])dnl +-AC_REQUIRE([AC_EXEEXT])dnl ++test -z "$LN_S" && LN_S="ln -s" ++_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl ++dnl ++AC_REQUIRE([LT_CMD_MAX_LEN])dnl ++_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl ++_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl + dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_CHECK_SHELL_FEATURES])dnl ++m4_require([_LT_CMD_RELOAD])dnl ++m4_require([_LT_CHECK_MAGIC_METHOD])dnl ++m4_require([_LT_CMD_OLD_ARCHIVE])dnl ++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++ ++_LT_CONFIG_LIBTOOL_INIT([ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes INIT. ++if test -n "\${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++]) ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi --lt_prog_compiler_wl= --lt_prog_compiler_pic= --lt_prog_compiler_static= - --echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 --echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -+$as_echo_n "checking for ANSI C header files... " >&6; } -+if test "${ac_cv_header_stdc+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include -+#include -+#include -+#include +-AC_LIBTOOL_SYS_MAX_CMD_LEN +-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +-AC_LIBTOOL_OBJDIR ++_LT_CHECK_OBJDIR -- if test "$GCC" = yes; then -- lt_prog_compiler_wl='-Wl,' -- lt_prog_compiler_static='-static' -+int -+main () -+{ +-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +-_LT_AC_PROG_ECHO_BACKSLASH ++m4_require([_LT_TAG_COMPILER])dnl ++_LT_PROG_ECHO_BACKSLASH -- case $host_os in -- aix*) -- # All AIX code is PIC. -- if test "$host_cpu" = ia64; then -- # AIX 5 now supports IA64 processor -- lt_prog_compiler_static='-Bstatic' -- fi -- ;; -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_header_stdc=yes -+else -+ ac_cv_header_stdc=no -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + case $host_os in + aix3*) +@@ -123,5868 +216,7818 @@ esac -- amigaos*) -- # FIXME: we need at least 68020 code to build shared libraries, but -- # adding the `-m68020' flag to GCC prevents building anything better, -- # like `-m68040'. -- lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' -- ;; -+if test $ac_cv_header_stdc = yes; then -+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include + # Sed substitution that helps us do robust quoting. It backslashifies + # metacharacters that are still active within double-quoted strings. +-Xsed='sed -e s/^X//' +-[sed_quote_subst='s/$[\\"\\`$\\\\]$/\\\1/g'] ++sed_quote_subst='s/$[["`$\\]]$/\\\1/g' -- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) -- # PIC is the default for these OSes. -- ;; -+_ACEOF -+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -+ $EGREP "memchr" >/dev/null 2>&1; then : + # Same as above, but do not quote variable references. +-[double_quote_subst='s/$[\\"\\`\\\\]$/\\\1/g'] ++double_quote_subst='s/$[["`\\]]$/\\\1/g' -- mingw* | pw32* | os2*) -- # This hack is so that the source file can tell whether it is being -- # built for inclusion in a dll (and should export symbols for example). -- lt_prog_compiler_pic='-DDLL_EXPORT' -- ;; -+else -+ ac_cv_header_stdc=no -+fi -+rm -f conftest* + # Sed substitution to delay expansion of an escaped shell variable in a + # double_quote_subst'ed string. + delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -- darwin* | rhapsody*) -- # PIC is the default on this platform -- # Common symbols not allowed in MH_DYLIB files -- lt_prog_compiler_pic='-fno-common' -- ;; -+fi ++# Sed substitution to delay expansion of an escaped single quote. ++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' ++ + # Sed substitution to avoid accidental globbing in evaled expressions + no_glob_subst='s/\*/\\\*/g' -- msdosdjgpp*) -- # Just because we use GCC doesn't mean we suddenly get shared libraries -- # on systems that don't support them. -- lt_prog_compiler_can_build_shared=no -- enable_shared=no -- ;; -+if test $ac_cv_header_stdc = yes; then -+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include +-# Constants: +-rm="rm -f" +- + # Global variables: +-default_ofile=libtool ++ofile=libtool + can_build_shared=yes -- sysv4*MP*) -- if test -d /usr/nec; then -- lt_prog_compiler_pic=-Kconform_pic -- fi -- ;; -+_ACEOF -+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -+ $EGREP "free" >/dev/null 2>&1; then : +-# All known linkers require a `.a' archive for static linking (except M$VC, ++# All known linkers require a `.a' archive for static linking (except MSVC, + # which needs '.lib'). + libext=a +-ltmain="$ac_aux_dir/ltmain.sh" +-ofile="$default_ofile" +-with_gnu_ld="$lt_cv_prog_gnu_ld" -- hpux*) -- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -- # not for PA HP-UX. -- case "$host_cpu" in -- hppa*64*|ia64*) -- # +Z the default -- ;; -- *) -- lt_prog_compiler_pic='-fPIC' -- ;; -- esac -- ;; -+else -+ ac_cv_header_stdc=no -+fi -+rm -f conftest* +-AC_CHECK_TOOL(AR, ar, false) +-AC_CHECK_TOOL(RANLIB, ranlib, :) +-AC_CHECK_TOOL(STRIP, strip, :) ++with_gnu_ld="$lt_cv_prog_gnu_ld" -- *) -- lt_prog_compiler_pic='-fPIC' -- ;; -- esac -- else -- # PORTME Check for flag to pass linker flags through the system compiler. -- case $host_os in -- aix*) -- lt_prog_compiler_wl='-Wl,' -- if test "$host_cpu" = ia64; then -- # AIX 5 now supports IA64 processor -- lt_prog_compiler_static='-Bstatic' -- else -- lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' -- fi -- ;; -+fi + old_CC="$CC" + old_CFLAGS="$CFLAGS" -- mingw* | pw32* | os2*) -- # This hack is so that the source file can tell whether it is being -- # built for inclusion in a dll (and should export symbols for example). -- lt_prog_compiler_pic='-DDLL_EXPORT' -- ;; -+if test $ac_cv_header_stdc = yes; then -+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -+ if test "$cross_compiling" = yes; then : -+ : -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include -+#include -+#if ((' ' & 0x0FF) == 0x020) -+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -+#else -+# define ISLOWER(c) \ -+ (('a' <= (c) && (c) <= 'i') \ -+ || ('j' <= (c) && (c) <= 'r') \ -+ || ('s' <= (c) && (c) <= 'z')) -+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -+#endif + # Set sane defaults for various variables +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-test -z "$AS" && AS=as + test -z "$CC" && CC=cc + test -z "$LTCC" && LTCC=$CC +-test -z "$DLLTOOL" && DLLTOOL=dlltool ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS + test -z "$LD" && LD=ld +-test -z "$LN_S" && LN_S="ln -s" +-test -z "$MAGIC_CMD" && MAGIC_CMD=file +-test -z "$NM" && NM=nm +-test -z "$SED" && SED=sed +-test -z "$OBJDUMP" && OBJDUMP=objdump +-test -z "$RANLIB" && RANLIB=: +-test -z "$STRIP" && STRIP=: + test -z "$ac_objext" && ac_objext=o -- hpux9* | hpux10* | hpux11*) -- lt_prog_compiler_wl='-Wl,' -- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -- # not for PA HP-UX. -- case "$host_cpu" in -- hppa*64*|ia64*) -- # +Z the default -- ;; -- *) -- lt_prog_compiler_pic='+Z' -- ;; -- esac -- # Is there a better lt_prog_compiler_static that works with the bundled CC? -- lt_prog_compiler_static='${wl}-a ${wl}archive' -- ;; -+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -+int -+main () -+{ -+ int i; -+ for (i = 0; i < 256; i++) -+ if (XOR (islower (i), ISLOWER (i)) -+ || toupper (i) != TOUPPER (i)) -+ return 2; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_run "$LINENO"; then : +-# Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +-old_postinstall_cmds='chmod 644 $oldlib' +-old_postuninstall_cmds= +- +-if test -n "$RANLIB"; then +- case $host_os in +- openbsd*) +- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" +- ;; +- *) +- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" +- ;; +- esac +- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +-fi ++_LT_CC_BASENAME([$compiler]) -- irix5* | irix6* | nonstopux*) -- lt_prog_compiler_wl='-Wl,' -- # PIC (with -KPIC) is the default. -- lt_prog_compiler_static='-non_shared' -- ;; -+else -+ ac_cv_header_stdc=no -+fi -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ -+ conftest.$ac_objext conftest.beam conftest.$ac_ext -+fi + # Only perform the check for file, if the check method requires it ++test -z "$MAGIC_CMD" && MAGIC_CMD=file + case $deplibs_check_method in + file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- AC_PATH_MAGIC ++ _LT_PATH_MAGIC + fi + ;; + esac -- newsos6) -- lt_prog_compiler_pic='-KPIC' -- lt_prog_compiler_static='-Bstatic' -- ;; -+fi -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -+$as_echo "$ac_cv_header_stdc" >&6; } -+if test $ac_cv_header_stdc = yes; then +-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +-enable_win32_dll=yes, enable_win32_dll=no) +- +-AC_ARG_ENABLE([libtool-lock], +- [AC_HELP_STRING([--disable-libtool-lock], +- [avoid locking (might break parallel builds)])]) +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++# Use C for the default configuration in the libtool script ++LT_SUPPORTED_TAG([CC]) ++_LT_LANG_C_CONFIG ++_LT_LANG_DEFAULT_CONFIG ++_LT_CONFIG_COMMANDS ++])# _LT_SETUP -- linux*) -- case $CC in -- icc* | ecc*) -- lt_prog_compiler_wl='-Wl,' -- lt_prog_compiler_pic='-KPIC' -- lt_prog_compiler_static='-static' -- ;; -- ccc*) -- lt_prog_compiler_wl='-Wl,' -- # All Alpha code is PIC. -- lt_prog_compiler_static='-non_shared' -- ;; -- esac -- ;; -+$as_echo "#define STDC_HEADERS 1" >>confdefs.h +-AC_ARG_WITH([pic], +- [AC_HELP_STRING([--with-pic], +- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], +- [pic_mode="$withval"], +- [pic_mode=default]) +-test -z "$pic_mode" && pic_mode=default -- osf3* | osf4* | osf5*) -- lt_prog_compiler_wl='-Wl,' -- # All OSF/1 code is PIC. -- lt_prog_compiler_static='-non_shared' -- ;; -+fi +-# Use C for the default configuration in the libtool script +-tagname= +-AC_LIBTOOL_LANG_C_CONFIG +-_LT_AC_TAGCONFIG +-])# AC_LIBTOOL_SETUP ++# _LT_PROG_LTMAIN ++# --------------- ++# Note that this code is called both from `configure', and `config.status' ++# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, ++# `config.status' has no value for ac_aux_dir unless we are using Automake, ++# so we pass a copy along to make sure it has a sensible value anyway. ++m4_defun([_LT_PROG_LTMAIN], ++[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl ++_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ++ltmain="$ac_aux_dir/ltmain.sh" ++])# _LT_PROG_LTMAIN -- sco3.2v5*) -- lt_prog_compiler_pic='-Kpic' -- lt_prog_compiler_static='-dn' -- ;; -+# On IRIX 5.3, sys/types and inttypes.h are conflicting. -+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ -+ inttypes.h stdint.h unistd.h -+do : -+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -+" -+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : -+ cat >>confdefs.h <<_ACEOF -+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -+_ACEOF -- solaris*) -- lt_prog_compiler_wl='-Wl,' -- lt_prog_compiler_pic='-KPIC' -- lt_prog_compiler_static='-Bstatic' -- ;; -+fi +-# _LT_AC_SYS_COMPILER +-# ------------------- +-AC_DEFUN([_LT_AC_SYS_COMPILER], +-[AC_REQUIRE([AC_PROG_CC])dnl -- sunos4*) -- lt_prog_compiler_wl='-Qoption ld ' -- lt_prog_compiler_pic='-PIC' -- lt_prog_compiler_static='-Bstatic' -- ;; -+done +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} ++# So that we can recreate a full libtool script including additional ++# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS ++# in macros and then make a single call at the end using the `libtool' ++# label. -- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -- lt_prog_compiler_wl='-Wl,' -- lt_prog_compiler_pic='-KPIC' -- lt_prog_compiler_static='-Bstatic' -- ;; +-# Allow CC to be a program name with arguments. +-compiler=$CC +-])# _LT_AC_SYS_COMPILER -- sysv4*MP*) -- if test -d /usr/nec ;then -- lt_prog_compiler_pic='-Kconform_pic' -- lt_prog_compiler_static='-Bstatic' -- fi -- ;; -+for ac_header in dlfcn.h -+do : -+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -+" -+if test "x$ac_cv_header_dlfcn_h" = x""yes; then : -+ cat >>confdefs.h <<_ACEOF -+#define HAVE_DLFCN_H 1 -+_ACEOF ++# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) ++# ---------------------------------------- ++# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. ++m4_define([_LT_CONFIG_LIBTOOL_INIT], ++[m4_ifval([$1], ++ [m4_append([_LT_OUTPUT_LIBTOOL_INIT], ++ [$1 ++])])]) -- uts4*) -- lt_prog_compiler_pic='-pic' -- lt_prog_compiler_static='-Bstatic' -- ;; -+fi +-# _LT_AC_SYS_LIBPATH_AIX +-# ---------------------- +-# Links a minimal program and checks the executable +-# for the system default hardcoded library path. In most cases, +-# this is /usr/lib:/lib, but when the MPI compilers are used +-# the location of the communication and MPI libs are included too. +-# If we don't find anything, use the default library path according +-# to the aix ld manual. +-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'`; fi],[]) +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +-])# _LT_AC_SYS_LIBPATH_AIX ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_INIT]) -- *) -- lt_prog_compiler_can_build_shared=no -- ;; -- esac -- fi -+done --echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 --echo "${ECHO_T}$lt_prog_compiler_pic" >&6 +-# _LT_AC_SHELL_INIT(ARG) +-# ---------------------- +-AC_DEFUN([_LT_AC_SHELL_INIT], +-[ifdef([AC_DIVERSION_NOTICE], +- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], +- [AC_DIVERT_PUSH(NOTICE)]) +-$1 +-AC_DIVERT_POP +-])# _LT_AC_SHELL_INIT ++# _LT_CONFIG_LIBTOOL([COMMANDS]) ++# ------------------------------ ++# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. ++m4_define([_LT_CONFIG_LIBTOOL], ++[m4_ifval([$1], ++ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], ++ [$1 ++])])]) ++ ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) ++ ++ ++# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) ++# ----------------------------------------------------- ++m4_defun([_LT_CONFIG_SAVE_COMMANDS], ++[_LT_CONFIG_LIBTOOL([$1]) ++_LT_CONFIG_LIBTOOL_INIT([$2]) ++]) --# --# Check to make sure the PIC flag actually works. --# --if test -n "$lt_prog_compiler_pic"; then --echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 --echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 --if test "${lt_prog_compiler_pic_works+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ac_ext=cpp -+ac_cpp='$CXXCPP $CPPFLAGS' -+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -+if test -z "$CXX"; then -+ if test -n "$CCC"; then -+ CXX=$CCC -+ else -+ if test -n "$ac_tool_prefix"; then -+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC -+ do -+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -+set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_CXX+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- lt_prog_compiler_pic_works=no -- ac_outfile=conftest.$ac_objext -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -- lt_compiler_flag="$lt_prog_compiler_pic -DPIC" -- # Insert the option either (1) after the last *FLAGS variable, or -- # (2) before a word containing "conftest.", or (3) at the end. -- # Note that $ac_compile itself does not contain backslashes and begins -- # with a dollar sign (not a hyphen), so the echo should work correctly. -- # The option is referenced via a variable to avoid confusing sed. -- lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -- -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:6502: $lt_compile\"" >&5) -- (eval "$lt_compile" 2>conftest.err) -- ac_status=$? -- cat conftest.err >&5 -- echo "$as_me:6506: \$? = $ac_status" >&5 -- if (exit $ac_status) && test -s "$ac_outfile"; then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s conftest.err; then -- lt_prog_compiler_pic_works=yes -- fi -- fi -- $rm conftest* -- --fi --echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 --echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6 -- --if test x"$lt_prog_compiler_pic_works" = xyes; then -- case $lt_prog_compiler_pic in -- "" | " "*) ;; -- *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; -- esac -+ if test -n "$CXX"; then -+ ac_cv_prog_CXX="$CXX" # Let the user override the test. - else -- lt_prog_compiler_pic= -- lt_prog_compiler_can_build_shared=no --fi -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+ done -+IFS=$as_save_IFS +-# _LT_AC_PROG_ECHO_BACKSLASH +-# -------------------------- +-# Add some code to the start of the generated configure script which +-# will find an echo command which doesn't interpret backslashes. +-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +-[_LT_AC_SHELL_INIT([ +-# Check that we are running under the correct shell. +-SHELL=${CONFIG_SHELL-/bin/sh} ++# _LT_FORMAT_COMMENT([COMMENT]) ++# ----------------------------- ++# Add leading comment marks to the start of each line, and a trailing ++# full-stop to the whole comment if one is not present already. ++m4_define([_LT_FORMAT_COMMENT], ++[m4_ifval([$1], [ ++m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], ++ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) ++)]) - fi --case "$host_os" in -- # For platforms which do not support PIC, -DPIC is meaningless: -- *djgpp*) -- lt_prog_compiler_pic= -- ;; -- *) -- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" -- ;; +-case X$ECHO in +-X*--fallback-echo) +- # Remove one level of quotation (which was required for Make). +- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` +- ;; -esac -- --echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 --echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 --if test "${lt_cv_prog_compiler_c_o+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+fi -+CXX=$ac_cv_prog_CXX -+if test -n "$CXX"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 -+$as_echo "$CXX" >&6; } - else -- lt_cv_prog_compiler_c_o=no -- $rm -r conftest 2>/dev/null -- mkdir conftest -- cd conftest -- mkdir out -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -- -- lt_compiler_flag="-o out/conftest2.$ac_objext" -- # Insert the option either (1) after the last *FLAGS variable, or -- # (2) before a word containing "conftest.", or (3) at the end. -- # Note that $ac_compile itself does not contain backslashes and begins -- # with a dollar sign (not a hyphen), so the echo should work correctly. -- lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -- -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:6562: $lt_compile\"" >&5) -- (eval "$lt_compile" 2>out/conftest.err) -- ac_status=$? -- cat out/conftest.err >&5 -- echo "$as_me:6566: \$? = $ac_status" >&5 -- if (exit $ac_status) && test -s out/conftest2.$ac_objext -- then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s out/conftest.err; then -- lt_cv_prog_compiler_c_o=yes -- fi -- fi -- chmod u+w . -- $rm conftest* -- # SGI C++ compiler will create directory out/ii_files/ for -- # template instantiation -- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files -- $rm out/* && rmdir out -- cd .. -- rmdir conftest -- $rm conftest* -- -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 +-echo=${ECHO-echo} +-if test "X[$]1" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +-elif test "X[$]1" = X--fallback-echo; then +- # Avoid inline document here, it may be left over +- : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then +- # Yippee, $echo works! +- : +-else +- # Restart under the correct shell. +- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +-fi --hard_links="nottested" --if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then -- # do not overwrite the value of need_locks provided by the user -- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 --echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 -- hard_links=yes -- $rm conftest* -- ln conftest.a conftest.b 2>/dev/null && hard_links=no -- touch conftest.a -- ln conftest.a conftest.b 2>&5 || hard_links=no -- ln conftest.a conftest.b 2>/dev/null && hard_links=no -- echo "$as_me:$LINENO: result: $hard_links" >&5 --echo "${ECHO_T}$hard_links" >&6 -- if test "$hard_links" = no; then -- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 --echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} -- need_locks=warn -+ test -n "$CXX" && break -+ done -+fi -+if test -z "$CXX"; then -+ ac_ct_CXX=$CXX -+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC -+do -+ # Extract the first word of "$ac_prog", so it can be a program name with args. -+set dummy $ac_prog; ac_word=$2 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -+$as_echo_n "checking for $ac_word... " >&6; } -+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -n "$ac_ct_CXX"; then -+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_CXX="$ac_prog" -+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 - fi -+done -+ done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -+if test -n "$ac_ct_CXX"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 -+$as_echo "$ac_ct_CXX" >&6; } - else -- need_locks=no -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi +-if test "X[$]1" = X--fallback-echo; then +- # used as fallback echo +- shift +- cat <&5 --echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 -- -- runpath_var= -- allow_undefined_flag= -- enable_shared_with_static_runtimes=no -- archive_cmds= -- archive_expsym_cmds= -- old_archive_From_new_cmds= -- old_archive_from_expsyms_cmds= -- export_dynamic_flag_spec= -- whole_archive_flag_spec= -- thread_safe_flag_spec= -- hardcode_libdir_flag_spec= -- hardcode_libdir_flag_spec_ld= -- hardcode_libdir_separator= -- hardcode_direct=no -- hardcode_minus_L=no -- hardcode_shlibpath_var=unsupported -- link_all_deplibs=unknown -- hardcode_automatic=no -- module_cmds= -- module_expsym_cmds= -- always_export_symbols=no -- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -- # include_expsyms should be a list of space-separated symbols to be *always* -- # included in the symbol list -- include_expsyms= -- # exclude_expsyms can be an extended regexp of symbols to exclude -- # it will be wrapped by ` (' and `)$', so one must not match beginning or -- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -- # as well as any symbol that contains `d'. -- exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -- # platforms (ab)use it in PIC code, but their linkers get confused if -- # the symbol is explicitly referenced. Since portable code cannot -- # rely on this symbol name, it's probably fine to never include it in -- # preloaded symbol tables. -- extract_expsyms_cmds= +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +-if test -z "$ECHO"; then +-if test "X${echo_test_string+set}" != Xset; then +-# find a string as large as possible, as long as the shell can cope with it +- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do +- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string="`eval $cmd`") 2>/dev/null && +- echo_test_string="`eval $cmd`" && +- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null +- then +- break +- fi +- done +-fi ++# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) ++# ------------------------------------------------------------------- ++# CONFIGNAME is the name given to the value in the libtool script. ++# VARNAME is the (base) name used in the configure script. ++# VALUE may be 0, 1 or 2 for a computed quote escaped value based on ++# VARNAME. Any other value will be used directly. ++m4_define([_LT_DECL], ++[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], ++ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], ++ [m4_ifval([$1], [$1], [$2])]) ++ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) ++ m4_ifval([$4], ++ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) ++ lt_dict_add_subkey([lt_decl_dict], [$2], ++ [tagged?], [m4_ifval([$5], [yes], [no])])]) ++]) -- case $host_os in -- cygwin* | mingw* | pw32*) -- # FIXME: the MSVC++ port hasn't been tested in a loooong time -- # When not using gcc, we currently assume that we are using -- # Microsoft Visual C++. -- if test "$GCC" != yes; then -- with_gnu_ld=no +-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- : +-else +- # The Solaris, AIX, and Digital Unix default echo programs unquote +- # backslashes. This makes it impossible to quote backslashes using +- # echo "$something" | sed 's/\\/\\\\/g' +- # +- # So, first we look for a working echo in the user's PATH. + +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for dir in $PATH /usr/ucb; do +- IFS="$lt_save_ifs" +- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && +- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$dir/echo" +- break - fi -- ;; -- openbsd*) -- with_gnu_ld=no -- ;; -- esac -+ test -n "$ac_ct_CXX" && break -+done +- done +- IFS="$lt_save_ifs" ++# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) ++# -------------------------------------------------------- ++m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) ++ ++ ++# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) ++# ------------------------------------------------ ++m4_define([lt_decl_tag_varnames], ++[_lt_decl_filter([tagged?], [yes], $@)]) ++ ++ ++# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) ++# --------------------------------------------------------- ++m4_define([_lt_decl_filter], ++[m4_case([$#], ++ [0], [m4_fatal([$0: too few arguments: $#])], ++ [1], [m4_fatal([$0: too few arguments: $#: $1])], ++ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], ++ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], ++ [lt_dict_filter([lt_decl_dict], $@)])[]dnl ++]) -- ld_shlibs=yes -- if test "$with_gnu_ld" = yes; then -- # If archive_cmds runs LD, not CC, wlarc should be empty -- wlarc='${wl}' -+ if test "x$ac_ct_CXX" = x; then -+ CXX="g++" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -+ac_tool_warned=yes ;; -+esac -+ CXX=$ac_ct_CXX -+ fi -+fi +- if test "X$echo" = Xecho; then +- # We didn't find a better echo, so look for alternatives. +- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # This shell has a builtin print -r that does the trick. +- echo='print -r' +- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && +- test "X$CONFIG_SHELL" != X/bin/ksh; then +- # If we have ksh, try running configure again with it. +- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} +- export ORIGINAL_CONFIG_SHELL +- CONFIG_SHELL=/bin/ksh +- export CONFIG_SHELL +- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} +- else +- # Try using printf. +- echo='printf %s\n' +- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # Cool, printf works +- : +- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL +- export CONFIG_SHELL +- SHELL="$CONFIG_SHELL" +- export SHELL +- echo="$CONFIG_SHELL [$]0 --fallback-echo" +- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$CONFIG_SHELL [$]0 --fallback-echo" +- else +- # maybe with a smaller string... +- prev=: -- # See if GNU ld supports shared libraries. -- case $host_os in -- aix3* | aix4* | aix5*) -- # On AIX/PPC, the GNU linker is very broken -- if test "$host_cpu" != ia64; then -- ld_shlibs=no -- cat <&2 -+ fi -+fi -+# Provide some information about the compiler. -+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 -+set X $ac_compile -+ac_compiler=$2 -+for ac_option in --version -v -V -qversion; do -+ { { ac_try="$ac_compiler $ac_option >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err -+ ac_status=$? -+ if test -s conftest.err; then -+ sed '10a\ -+... rest of stderr output deleted ... -+ 10q' conftest.err >conftest.er1 -+ cat conftest.er1 >&5 -+ fi -+ rm -f conftest.er1 conftest.err -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } -+done +- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do +- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null +- then +- break +- fi +- prev="$cmd" +- done ++# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) ++# -------------------------------------------------- ++m4_define([lt_decl_quote_varnames], ++[_lt_decl_filter([value], [1], $@)]) + -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 -+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } -+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ - --*** Warning: the GNU linker, at least up to release 2.9.1, is reported --*** to be unable to reliably create shared libraries on AIX. --*** Therefore, libtool is disabling shared libraries support. If you --*** really care for shared libraries, you may want to modify your PATH --*** so that a non-GNU linker is found, and then restart. -+int -+main () -+{ -+#ifndef __GNUC__ -+ choke me -+#endif ++ ++# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) ++# --------------------------------------------------- ++m4_define([lt_decl_dquote_varnames], ++[_lt_decl_filter([value], [2], $@)]) ++ ++ ++# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) ++# --------------------------------------------------- ++m4_define([lt_decl_varnames_tagged], ++[m4_assert([$# <= 2])dnl ++_$0(m4_quote(m4_default([$1], [[, ]])), ++ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), ++ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) ++m4_define([_lt_decl_varnames_tagged], ++[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) ++ ++ ++# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) ++# ------------------------------------------------ ++m4_define([lt_decl_all_varnames], ++[_$0(m4_quote(m4_default([$1], [[, ]])), ++ m4_if([$2], [], ++ m4_quote(lt_decl_varnames), ++ m4_quote(m4_shift($@))))[]dnl ++]) ++m4_define([_lt_decl_all_varnames], ++[lt_join($@, lt_decl_varnames_tagged([$1], ++ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ++]) --EOF +- if test "$prev" != 'sed 50q "[$]0"'; then +- echo_test_string=`eval $prev` +- export echo_test_string +- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} +- else +- # Oops. We lost completely, so just stick with echo. +- echo=echo +- fi - fi -- ;; -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_cxx_try_compile "$LINENO"; then : -+ ac_compiler_gnu=yes -+else -+ ac_compiler_gnu=no -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu +- fi +- fi +-fi +-fi -- amigaos*) -- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -- hardcode_libdir_flag_spec='-L$libdir' -- hardcode_minus_L=yes -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 -+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } -+if test $ac_compiler_gnu = yes; then -+ GXX=yes -+else -+ GXX= -+fi -+ac_test_CXXFLAGS=${CXXFLAGS+set} -+ac_save_CXXFLAGS=$CXXFLAGS -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 -+$as_echo_n "checking whether $CXX accepts -g... " >&6; } -+if test "${ac_cv_prog_cxx_g+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag -+ ac_cxx_werror_flag=yes -+ ac_cv_prog_cxx_g=no -+ CXXFLAGS="-g" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ +-# Copy echo and quote the copy suitably for passing to libtool from +-# the Makefile, instead of quoting the original, which is used later. +-ECHO=$echo +-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then +- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +-fi ++# _LT_CONFIG_STATUS_DECLARE([VARNAME]) ++# ------------------------------------ ++# Quote a variable value, and forward it to `config.status' so that its ++# declaration there will have the same value as in `configure'. VARNAME ++# must have a single quote delimited value for this to work. ++m4_define([_LT_CONFIG_STATUS_DECLARE], ++[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) -- # Samuel A. Falvo II reports -- # that the semantics of dynamic libraries on AmigaOS, at least up -- # to version 4, is to share data among multiple programs linked -- # with the same dynamic library. Since this doesn't match the -- # behavior of shared libraries on other platforms, we can't use -- # them. -- ld_shlibs=no -- ;; -+int -+main () -+{ +-AC_SUBST(ECHO) +-])])# _LT_AC_PROG_ECHO_BACKSLASH -- beos*) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- allow_undefined_flag=unsupported -- # Joseph Beckenbach says some releases of gcc -- # support --undefined. This deserves some investigation. FIXME -- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- else -- ld_shlibs=no -- fi ++# _LT_CONFIG_STATUS_DECLARATIONS ++# ------------------------------ ++# We delimit libtool config variables with single quotes, so when ++# we write them to config.status, we have to be sure to quote all ++# embedded single quotes properly. In configure, this macro expands ++# each variable declared with _LT_DECL (and _LT_TAGDECL) into: ++# ++# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' ++m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], ++[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), ++ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + +-# _LT_AC_LOCK +-# ----------- +-AC_DEFUN([_LT_AC_LOCK], +-[AC_ARG_ENABLE([libtool-lock], +- [AC_HELP_STRING([--disable-libtool-lock], +- [avoid locking (might break parallel builds)])]) +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +-# Some flags need to be propagated to the compiler or linker for good +-# libtool support. +-case $host in +-ia64-*-hpux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.$ac_objext` in +- *ELF-32*) +- HPUX_IA64_MODE="32" - ;; -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_cxx_try_compile "$LINENO"; then : -+ ac_cv_prog_cxx_g=yes -+else -+ CXXFLAGS="" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ +- *ELF-64*) +- HPUX_IA64_MODE="64" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +-*-*-irix6*) +- # Find out which ABI we are using. +- echo '[#]line __oline__ "configure"' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- if test "$lt_cv_prog_gnu_ld" = yes; then +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -melf32bsmip" +- ;; +- *N32*) +- LD="${LD-ld} -melf32bmipn32" +- ;; +- *64-bit*) +- LD="${LD-ld} -melf64bmip" +- ;; +- esac +- else +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -32" +- ;; +- *N32*) +- LD="${LD-ld} -n32" ++# _LT_LIBTOOL_TAGS ++# ---------------- ++# Output comment and list of tags supported by the script ++m4_defun([_LT_LIBTOOL_TAGS], ++[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl ++available_tags="_LT_TAGS"dnl ++]) ++ ++ ++# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) ++# ----------------------------------- ++# Extract the dictionary values for VARNAME (optionally with TAG) and ++# expand to a commented shell variable setting: ++# ++# # Some comment about what VAR is for. ++# visible_name=$lt_internal_name ++m4_define([_LT_LIBTOOL_DECLARE], ++[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], ++ [description])))[]dnl ++m4_pushdef([_libtool_name], ++ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl ++m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), ++ [0], [_libtool_name=[$]$1], ++ [1], [_libtool_name=$lt_[]$1], ++ [2], [_libtool_name=$lt_[]$1], ++ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl ++m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ++]) ++ ++ ++# _LT_LIBTOOL_CONFIG_VARS ++# ----------------------- ++# Produce commented declarations of non-tagged libtool config variables ++# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' ++# script. Tagged libtool config variables (even for the LIBTOOL CONFIG ++# section) are produced by _LT_LIBTOOL_TAG_VARS. ++m4_defun([_LT_LIBTOOL_CONFIG_VARS], ++[m4_foreach([_lt_var], ++ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), ++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) ++ ++ ++# _LT_LIBTOOL_TAG_VARS(TAG) ++# ------------------------- ++m4_define([_LT_LIBTOOL_TAG_VARS], ++[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), ++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) ++ ++ ++# _LT_TAGVAR(VARNAME, [TAGNAME]) ++# ------------------------------ ++m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) ++ ++ ++# _LT_CONFIG_COMMANDS ++# ------------------- ++# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of ++# variables for single and double quote escaping we saved from calls ++# to _LT_DECL, we can put quote escaped variables declarations ++# into `config.status', and then the shell code to quote escape them in ++# for loops in `config.status'. Finally, any additional code accumulated ++# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. ++m4_defun([_LT_CONFIG_COMMANDS], ++[AC_PROVIDE_IFELSE([LT_OUTPUT], ++ dnl If the libtool generation code has been placed in $CONFIG_LT, ++ dnl instead of duplicating it all over again into config.status, ++ dnl then we will have config.status run $CONFIG_LT later, so it ++ dnl needs to know what name is stored there: ++ [AC_CONFIG_COMMANDS([libtool], ++ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], ++ dnl If the libtool generation code is destined for config.status, ++ dnl expand the accumulated commands and init code now: ++ [AC_CONFIG_COMMANDS([libtool], ++ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ++])#_LT_CONFIG_COMMANDS ++ ++ ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], ++[ ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++sed_quote_subst='$sed_quote_subst' ++double_quote_subst='$double_quote_subst' ++delay_variable_subst='$delay_variable_subst' ++_LT_CONFIG_STATUS_DECLARATIONS ++LTCC='$LTCC' ++LTCFLAGS='$LTCFLAGS' ++compiler='$compiler_DEFAULT' ++ ++# Quote evaled strings. ++for var in lt_decl_all_varnames([[ \ ++]], lt_decl_quote_varnames); do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[[\\\\\\\`\\"\\\$]]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; +- *64-bit*) +- LD="${LD-ld} -64" ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +- fi +- fi +- rm -rf conftest* +- ;; ++done + +-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case "`/usr/bin/file conftest.o`" in +- *32-bit*) +- case $host in +- x86_64-*linux*) +- LD="${LD-ld} -m elf_i386" +- ;; +- ppc64-*linux*|powerpc64-*linux*) +- LD="${LD-ld} -m elf32ppclinux" +- ;; +- s390x-*linux*) +- LD="${LD-ld} -m elf_s390" +- ;; +- sparc64-*linux*) +- LD="${LD-ld} -m elf32_sparc" +- ;; +- esac ++# Double-quote double-evaled strings. ++for var in lt_decl_all_varnames([[ \ ++]], lt_decl_dquote_varnames); do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[[\\\\\\\`\\"\\\$]]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; +- *64-bit*) +- case $host in +- x86_64-*linux*) +- LD="${LD-ld} -m elf_x86_64" +- ;; +- ppc*-*linux*|powerpc*-*linux*) +- LD="${LD-ld} -m elf64ppc" +- ;; +- s390*-*linux*) +- LD="${LD-ld} -m elf64_s390" +- ;; +- sparc*-*linux*) +- LD="${LD-ld} -m elf64_sparc" +- ;; +- esac ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +- fi +- rm -rf conftest* ++done ++ ++# Fix-up fallback echo if it was mangled by the above quoting rules. ++case \$lt_ECHO in ++*'\\\[$]0 --fallback-echo"')dnl " ++ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` + ;; ++esac -- cygwin* | mingw* | pw32*) -- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, -- # as there is no search path for DLLs. -- hardcode_libdir_flag_spec='-L$libdir' -- allow_undefined_flag=unsupported -- always_export_symbols=no -- enable_shared_with_static_runtimes=yes -- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* $[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' -+int -+main () -+{ +-*-*-sco3.2v5*) +- # On SCO OpenServer 5, we need -belf to get full-featured binaries. +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -belf" +- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, +- [AC_LANG_PUSH(C) +- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) +- AC_LANG_POP]) +- if test x"$lt_cv_cc_needs_belf" != x"yes"; then +- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +- CFLAGS="$SAVE_CFLAGS" +- fi +- ;; +-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +-[*-*-cygwin* | *-*-mingw* | *-*-pw32*) +- AC_CHECK_TOOL(DLLTOOL, dlltool, false) +- AC_CHECK_TOOL(AS, as, false) +- AC_CHECK_TOOL(OBJDUMP, objdump, false) +- ;; +- ]) +-esac ++_LT_OUTPUT_LIBTOOL_INIT ++]) -- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then -- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- # If the export-symbols file already is a .def file (1st line -- # is EXPORTS), use it as is; otherwise, prepend... -- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -- cp $export_symbols $output_objdir/$soname.def; -- else -- echo EXPORTS > $output_objdir/$soname.def; -- cat $export_symbols >> $output_objdir/$soname.def; -- fi~ -- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- else -- ld_shlibs=no -- fi -- ;; -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_cxx_try_compile "$LINENO"; then : +-need_locks="$enable_libtool_lock" -- netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' -- wlarc= -- else -- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- fi -- ;; -+else -+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag -+ CXXFLAGS="-g" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ +-])# _LT_AC_LOCK ++# LT_OUTPUT ++# --------- ++# This macro allows early generation of the libtool script (before ++# AC_OUTPUT is called), incase it is used in configure for compilation ++# tests. ++AC_DEFUN([LT_OUTPUT], ++[: ${CONFIG_LT=./config.lt} ++AC_MSG_NOTICE([creating $CONFIG_LT]) ++cat >"$CONFIG_LT" <<_LTEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate a libtool stub with the current configuration. ++ ++lt_cl_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AS_SHELL_SANITIZE ++_AS_PREPARE -- solaris* | sysv5*) -- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then -- ld_shlibs=no -- cat <&2 -+int -+main () ++exec AS_MESSAGE_FD>&1 ++exec AS_MESSAGE_LOG_FD>>config.log +{ ++ echo ++ AS_BOX([Running $as_me.]) ++} >&AS_MESSAGE_LOG_FD ++ ++lt_cl_help="\ ++\`$as_me' creates a local libtool stub from the current configuration, ++for use in further configure time tests before the real libtool is ++generated. ++ ++Usage: $[0] [[OPTIONS]] ++ ++ -h, --help print this help, then exit ++ -V, --version print version number, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ ++Report bugs to ." ++ ++lt_cl_version="\ ++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl ++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) ++configured by $[0], generated by m4_PACKAGE_STRING. ++ ++Copyright (C) 2008 Free Software Foundation, Inc. ++This config.lt script is free software; the Free Software Foundation ++gives unlimited permision to copy, distribute and modify it." --*** Warning: The releases 2.8.* of the GNU linker cannot reliably --*** create shared libraries on Solaris systems. Therefore, libtool --*** is disabling shared libraries support. We urge you to upgrade GNU --*** binutils to release 2.9.1 or newer. Another option is to modify --*** your PATH or compiler configuration so that the native linker is --*** used, and then restart. -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_cxx_try_compile "$LINENO"; then : -+ ac_cv_prog_cxx_g=yes -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 -+$as_echo "$ac_cv_prog_cxx_g" >&6; } -+if test "$ac_test_CXXFLAGS" = set; then -+ CXXFLAGS=$ac_save_CXXFLAGS -+elif test $ac_cv_prog_cxx_g = yes; then -+ if test "$GXX" = yes; then -+ CXXFLAGS="-g -O2" -+ else -+ CXXFLAGS="-g" -+ fi -+else -+ if test "$GXX" = yes; then -+ CXXFLAGS="-O2" -+ else -+ CXXFLAGS= -+ fi -+fi -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu - --EOF -- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- else -- ld_shlibs=no -- fi -- ;; -+depcc="$CXX" am_compiler_list= - -- sunos4*) -- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- wlarc= -- hardcode_direct=yes -- hardcode_shlibpath_var=no -- ;; -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -+$as_echo_n "checking dependency style of $depcc... " >&6; } -+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then -+ # We make a subdir and do the tests there. Otherwise we can end up -+ # making bogus files that we don't know about and never remove. For -+ # instance it was reported that on HP-UX the gcc test will end up -+ # making a dummy file named `D' -- because `-MD' means `put the output -+ # in D'. -+ mkdir conftest.dir -+ # Copy depcomp to subdir because otherwise we won't find it if we're -+ # using a relative directory. -+ cp "$am_depcomp" conftest.dir -+ cd conftest.dir -+ # We will build objects and dependencies in a subdirectory because -+ # it helps to detect inapplicable dependency modes. For instance -+ # both Tru64's cc and ICC support -MD to output dependencies as a -+ # side effect of compilation, but ICC will put the dependencies in -+ # the current directory while Tru64 will put them in the object -+ # directory. -+ mkdir sub +-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +-# ---------------------------------------------------------------- +-# Check whether the given compiler option works +-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +-[AC_REQUIRE([LT_AC_PROG_SED]) +-AC_CACHE_CHECK([$1], [$2], +- [$2=no +- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$3" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ +- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&AS_MESSAGE_LOG_FD +- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then +- $2=yes +- fi +- fi +- $rm conftest* +-]) ++while test $[#] != 0 ++do ++ case $[1] in ++ --version | --v* | -V ) ++ echo "$lt_cl_version"; exit 0 ;; ++ --help | --h* | -h ) ++ echo "$lt_cl_help"; exit 0 ;; ++ --debug | --d* | -d ) ++ debug=: ;; ++ --quiet | --q* | --silent | --s* | -q ) ++ lt_cl_silent=: ;; -- linux*) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_cmds="$tmp_archive_cmds" -- supports_anon_versioning=no -- case `$LD -v 2>/dev/null` in -- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 -- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... -- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... -- *\ 2.11.*) ;; # other 2.11 versions -- *) supports_anon_versioning=yes ;; -- esac -- if test $supports_anon_versioning = yes; then -- archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ --cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ --$echo "local: *; };" >> $output_objdir/$libname.ver~ -- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' -- else -- archive_expsym_cmds="$tmp_archive_cmds" -- fi -- else -- ld_shlibs=no -- fi -- ;; -+ am_cv_CXX_dependencies_compiler_type=none -+ if test "$am_compiler_list" = ""; then -+ am_compiler_list=`sed -n 's/^#*$[a-zA-Z0-9]*$)$/\1/p' < ./depcomp` -+ fi -+ am__universal=false -+ case " $depcc " in #( -+ *\ -arch\ *\ -arch\ *) am__universal=true ;; -+ esac +-if test x"[$]$2" = xyes; then +- ifelse([$5], , :, [$5]) +-else +- ifelse([$6], , :, [$6]) +-fi +-])# AC_LIBTOOL_COMPILER_OPTION ++ -*) AC_MSG_ERROR([unrecognized option: $[1] ++Try \`$[0] --help' for more information.]) ;; -- *) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ for depmode in $am_compiler_list; do -+ # Setup a source with many dependencies, because some compilers -+ # like to wrap large dependency lists on column 80 (with \), and -+ # we should not choose a depcomp mode which is confused by this. -+ # -+ # We need to recreate these files for each test, as the compiler may -+ # overwrite some of them when testing with obscure command lines. -+ # This happens at least with the AIX C compiler. -+ : > sub/conftest.c -+ for i in 1 2 3 4 5 6; do -+ echo '#include "conftst'$i'.h"' >> sub/conftest.c -+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with -+ # Solaris 8's {/usr,}/bin/sh. -+ touch sub/conftst$i.h -+ done -+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf -+ -+ # We check with `-c' and `-o' for the sake of the "dashmstdout" -+ # mode. It turns out that the SunPro C++ compiler does not properly -+ # handle `-M -o', and we need to detect this. Also, some Intel -+ # versions had trouble with output in subdirs -+ am__obj=sub/conftest.${OBJEXT-o} -+ am__minus_obj="-o $am__obj" -+ case $depmode in -+ gcc) -+ # This depmode causes a compiler race in universal mode. -+ test "$am__universal" = false || continue -+ ;; -+ nosideeffect) -+ # after this tag, mechanisms are not by side-effect, so they'll -+ # only be used when explicitly requested -+ if test "x$enable_dependency_tracking" = xyes; then -+ continue - else -- ld_shlibs=no -+ break - fi - ;; -+ msvisualcpp | msvcmsys) -+ # This compiler won't grok `-c -o', but also, the minuso test has -+ # not run yet. These depmodes are late enough in the game, and -+ # so weak that their functioning should not be impacted. -+ am__obj=conftest.${OBJEXT-o} -+ am__minus_obj= -+ ;; -+ none) break ;; - esac -- -- if test "$ld_shlibs" = yes; then -- runpath_var=LD_RUN_PATH -- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' -- export_dynamic_flag_spec='${wl}--export-dynamic' -- # ancient GNU ld didn't support --whole-archive et. al. -- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then -- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -- else -- whole_archive_flag_spec= -+ if depmode=$depmode \ -+ source=sub/conftest.c object=$am__obj \ -+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ -+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ -+ >/dev/null 2>conftest.err && -+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && -+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && -+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && -+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then -+ # icc doesn't choke on unknown options, it will just issue warnings -+ # or remarks (even with -Werror). So we grep stderr for any message -+ # that says an option was ignored or not supported. -+ # When given -MP, icc 7.0 and 7.1 complain thusly: -+ # icc: Command line warning: ignoring option '-M'; no argument required -+ # The diagnosis changed in icc 8.0: -+ # icc: Command line remark: option '-MP' not supported -+ if (grep 'ignoring option' conftest.err || -+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else -+ am_cv_CXX_dependencies_compiler_type=$depmode -+ break - fi - fi -- else -- # PORTME fill in a description of your system's linker (not GNU ld) -- case $host_os in -- aix3*) -- allow_undefined_flag=unsupported -- always_export_symbols=yes -- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' -- # Note: this linker hardcodes the directories in LIBPATH if there -- # are no directories specified by -L. -- hardcode_minus_L=yes -- if test "$GCC" = yes && test -z "$link_static_flag"; then -- # Neither direct hardcoding nor static linking is supported with a -- # broken collect2. -- hardcode_direct=unsupported -- fi -- ;; -- -- aix4* | aix5*) -- if test "$host_cpu" = ia64; then -- # On IA64, the linker does run time linking by default, so we don't -- # have to do anything special. -- aix_use_runtimelinking=no -- exp_sym_flag='-Bexport' -- no_entry_flag="" -- else -- # If we're using GNU nm, then we don't want the "-C" option. -- # -C means demangle to AIX nm, but means don't demangle with GNU nm -- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then -- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' -- else -- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' -- fi -- aix_use_runtimelinking=no -- -- # Test if we are trying to use run time linking or normal -- # AIX style linking. If -brtl is somewhere in LDFLAGS, we -- # need to do runtime linking. -- case $host_os in aix4.[23]|aix4.[23].*|aix5*) -- for ld_flag in $LDFLAGS; do -- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then -- aix_use_runtimelinking=yes -- break -- fi -- done -- esac -+ done ++ *) AC_MSG_ERROR([unrecognized argument: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ esac ++ shift ++done -- exp_sym_flag='-bexport' -- no_entry_flag='-bnoentry' -- fi -+ cd .. -+ rm -rf conftest.dir -+else -+ am_cv_CXX_dependencies_compiler_type=none +-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +-# [ACTION-SUCCESS], [ACTION-FAILURE]) +-# ------------------------------------------------------------ +-# Check whether the given compiler option works +-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +-[AC_CACHE_CHECK([$1], [$2], +- [$2=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $3" +- printf "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&AS_MESSAGE_LOG_FD +- else +- $2=yes +- fi +- fi +- $rm conftest* +- LDFLAGS="$save_LDFLAGS" +-]) ++if $lt_cl_silent; then ++ exec AS_MESSAGE_FD>/dev/null +fi ++_LTEOF -- # When large executables or shared objects are built, AIX ld can -- # have problems creating the table of contents. If linking a library -- # or program results in "error TOC overflow" add -mminimal-toc to -- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not -- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 -+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } -+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type +-if test x"[$]$2" = xyes; then +- ifelse([$4], , :, [$4]) +-else +- ifelse([$5], , :, [$5]) ++cat >>"$CONFIG_LT" <<_LTEOF ++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AC_MSG_NOTICE([creating $ofile]) ++_LT_OUTPUT_LIBTOOL_COMMANDS ++AS_EXIT(0) ++_LTEOF ++chmod +x "$CONFIG_LT" ++ ++# configure is writing to config.log, but config.lt does its own redirection, ++# appending to config.log, which fails on DOS, as config.log is still kept ++# open by configure. Here we exec the FD to /dev/null, effectively closing ++# config.log, so it can be properly (re)opened and appended to by config.lt. ++if test "$no_create" != yes; then ++ lt_cl_success=: ++ test "$silent" = yes && ++ lt_config_lt_args="$lt_config_lt_args --quiet" ++ exec AS_MESSAGE_LOG_FD>/dev/null ++ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false ++ exec AS_MESSAGE_LOG_FD>>config.log ++ $lt_cl_success || AS_EXIT(1) + fi +-])# AC_LIBTOOL_LINKER_OPTION ++])# LT_OUTPUT -- archive_cmds='' -- hardcode_direct=yes -- hardcode_libdir_separator=':' -- link_all_deplibs=yes -+ if -+ test "x$enable_dependency_tracking" != xno \ -+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then -+ am__fastdepCXX_TRUE= -+ am__fastdepCXX_FALSE='#' -+else -+ am__fastdepCXX_TRUE='#' -+ am__fastdepCXX_FALSE= -+fi -- if test "$GCC" = yes; then -- case $host_os in aix4.012|aix4.012.*) -- # We only want to do this on AIX 4.2 and lower, the check -- # below for broken collect2 doesn't work under 4.3+ -- collect2name=`${CC} -print-prog-name=collect2` -- if test -f "$collect2name" && \ -- strings "$collect2name" | grep resolve_lib_name >/dev/null -- then -- # We have reworked collect2 -- hardcode_direct=yes -- else -- # We have old collect2 -- hardcode_direct=unsupported -- # It fails to find uninstalled libraries when the uninstalled -- # path is not listed in the libpath. Setting hardcode_minus_L -- # to unsupported forces relinking -- hardcode_minus_L=yes -- hardcode_libdir_flag_spec='-L$libdir' -- hardcode_libdir_separator= -- fi -- esac -- shared_flag='-shared' -- else -- # not using gcc -- if test "$host_cpu" = ia64; then -- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release -- # chokes on -Wl,-G. The following line is correct: -- shared_flag='-G' -- else -- if test "$aix_use_runtimelinking" = yes; then -- shared_flag='${wl}-G' -- else -- shared_flag='${wl}-bM:SRE' -- fi -- fi -- fi +-# AC_LIBTOOL_SYS_MAX_CMD_LEN +-# -------------------------- +-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +-[# find the maximum length of command line arguments +-AC_MSG_CHECKING([the maximum length of command line arguments]) +-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl +- i=0 +- teststring="ABCD" ++# _LT_CONFIG(TAG) ++# --------------- ++# If TAG is the built-in tag, create an initial libtool script with a ++# default configuration from the untagged config vars. Otherwise add code ++# to config.status for appending the configuration named by TAG from the ++# matching tagged config vars. ++m4_defun([_LT_CONFIG], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++_LT_CONFIG_SAVE_COMMANDS([ ++ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl ++ m4_if(_LT_TAG, [C], [ ++ # See if we are running on zsh, and set the options which allow our ++ # commands through without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi -- # It seems that -bexpall does not export symbols beginning with -- # underscore (_), so it is better to generate a list of symbols to export. -- always_export_symbols=yes -- if test "$aix_use_runtimelinking" = yes; then -- # Warning - without using the other runtime loading flags (-brtl), -- # -berok will link without error, but may produce a broken library. -- allow_undefined_flag='-berok' -- # Determine the default libpath from the value encoded in an empty executable. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+if test -n "$CXX" && ( test "X$CXX" != "Xno" && -+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || -+ (test "X$CXX" != "Xg++"))) ; then -+ ac_ext=cpp -+ac_cpp='$CXXCPP $CPPFLAGS' -+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 -+$as_echo_n "checking how to run the C++ preprocessor... " >&6; } -+if test -z "$CXXCPP"; then -+ if test "${ac_cv_prog_CXXCPP+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ # Double quotes because CXXCPP needs to be expanded -+ for CXXCPP in "$CXX -E" "/lib/cpp" -+ do -+ ac_preproc_ok=false -+for ac_cxx_preproc_warn_flag in '' yes -+do -+ # Use a header file that comes with gcc, so configuring glibc -+ # with a fresh cross-compiler works. -+ # Prefer to if __STDC__ is defined, since -+ # exists even on freestanding compilers. -+ # On the NeXT, cc -E runs the code through the compiler's parser, -+ # not just through cpp. "Syntax error" is here to catch this case. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ -- --int --main () --{ -- -- ; -- return 0; --} -+#ifdef __STDC__ -+# include -+#else -+# include -+#endif -+ Syntax error - _ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+if ac_fn_cxx_try_cpp "$LINENO"; then : +- case $build_os in +- msdosdjgpp*) +- # On DJGPP, this test can blow up pretty badly due to problems in libc +- # (any single argument exceeding 2000 bytes causes a buffer overrun +- # during glob expansion). Even if it were fixed, the result of this +- # check would be larger than it should be. +- lt_cv_sys_max_cmd_len=12288; # 12K is about right +- ;; ++ cfgfile="${ofile}T" ++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 ++ $RM "$cfgfile" --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'`; fi - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- -+ # Broken: fails on valid input. -+continue - fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -+rm -f conftest.err conftest.i conftest.$ac_ext +- gnu*) +- # Under GNU Hurd, this test is not required because there is +- # no limit to the length of command line arguments. +- # Libtool will interpret -1 as no limit whatsoever +- lt_cv_sys_max_cmd_len=-1; +- ;; ++ cat <<_LT_EOF >> "$cfgfile" ++#! $SHELL -- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" -- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" -- else -- if test "$host_cpu" = ia64; then -- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' -- allow_undefined_flag="-z nodefs" -- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" -- else -- # Determine the default libpath from the value encoded in an empty executable. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ # OK, works on sane cases. Now check whether nonexistent headers -+ # can be detected and how. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ -+#include -+_ACEOF -+if ac_fn_cxx_try_cpp "$LINENO"; then : -+ # Broken: success on invalid input. -+continue -+else -+ # Passes both tests. -+ac_preproc_ok=: -+break -+fi -+rm -f conftest.err conftest.i conftest.$ac_ext +- cygwin* | mingw*) +- # On Win9x/ME, this test blows up -- it succeeds, but takes +- # about 5 minutes as the teststring grows exponentially. +- # Worse, since 9x/ME are not pre-emptively multitasking, +- # you end up with a "frozen" computer, even though with patience +- # the test eventually succeeds (with a max line length of 256k). +- # Instead, let's just punt: use the minimum linelength reported by +- # all of the supported platforms: 8192 (on NT/2K/XP). +- lt_cv_sys_max_cmd_len=8192; +- ;; ++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++_LT_COPYING ++_LT_LIBTOOL_TAGS --int --main () --{ -+done -+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -+rm -f conftest.i conftest.err conftest.$ac_ext -+if $ac_preproc_ok; then : -+ break -+fi +- amigaos*) +- # On AmigaOS with pdksh, this test takes hours, literally. +- # So we just punt and use a minimum line length of 8192. +- lt_cv_sys_max_cmd_len=8192; +- ;; ++# ### BEGIN LIBTOOL CONFIG ++_LT_LIBTOOL_CONFIG_VARS ++_LT_LIBTOOL_TAG_VARS ++# ### END LIBTOOL CONFIG -- ; -- return 0; --} -+ done -+ ac_cv_prog_CXXCPP=$CXXCPP +- *) +- # If test is not a shell built-in, we'll probably end up computing a +- # maximum length that is only half of the actual maximum length, but +- # we can't tell. +- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ +- = "XX$teststring") >/dev/null 2>&1 && +- new_result=`expr "X$teststring" : ".*" 2>&1` && +- lt_cv_sys_max_cmd_len=$new_result && +- test $i != 17 # 1/2 MB should be enough +- do +- i=`expr $i + 1` +- teststring=$teststring$teststring +- done +- teststring= +- # Add a significant safety factor because C++ compilers can tack on massive +- # amounts of additional arguments before passing them to the linker. +- # It appears as though 1/2 is a usable value. +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++_LT_EOF + ++ case $host_os in ++ aix3*) ++ cat <<\_LT_EOF >> "$cfgfile" ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES +fi -+ CXXCPP=$ac_cv_prog_CXXCPP -+else -+ ac_cv_prog_CXXCPP=$CXXCPP -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 -+$as_echo "$CXXCPP" >&6; } -+ac_preproc_ok=false -+for ac_cxx_preproc_warn_flag in '' yes -+do -+ # Use a header file that comes with gcc, so configuring glibc -+ # with a fresh cross-compiler works. -+ # Prefer to if __STDC__ is defined, since -+ # exists even on freestanding compilers. -+ # On the NeXT, cc -E runs the code through the compiler's parser, -+ # not just through cpp. "Syntax error" is here to catch this case. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#ifdef __STDC__ -+# include -+#else -+# include -+#endif -+ Syntax error - _ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+if ac_fn_cxx_try_cpp "$LINENO"; then : ++_LT_EOF + ;; + esac +-]) +-if test -n $lt_cv_sys_max_cmd_len ; then +- AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +-else +- AC_MSG_RESULT(none) +-fi +-])# AC_LIBTOOL_SYS_MAX_CMD_LEN --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'`; fi - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ # Broken: fails on valid input. -+continue -+fi -+rm -f conftest.err conftest.i conftest.$ac_ext ++ _LT_PROG_LTMAIN -+ # OK, works on sane cases. Now check whether nonexistent headers -+ # can be detected and how. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include -+_ACEOF -+if ac_fn_cxx_try_cpp "$LINENO"; then : -+ # Broken: success on invalid input. -+continue -+else -+ # Passes both tests. -+ac_preproc_ok=: -+break - fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -+rm -f conftest.err conftest.i conftest.$ac_ext +-# _LT_AC_CHECK_DLFCN +-# -------------------- +-AC_DEFUN([_LT_AC_CHECK_DLFCN], +-[AC_CHECK_HEADERS(dlfcn.h)dnl +-])# _LT_AC_CHECK_DLFCN ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) -- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" -- # Warning - without using the other run time loading flags, -- # -berok will link without error, but may produce a broken library. -- no_undefined_flag=' ${wl}-bernotok' -- allow_undefined_flag=' ${wl}-berok' -- # -bexpall does not export symbols beginning with underscore (_) -- always_export_symbols=yes -- # Exported symbols can be pulled into shared objects from archives -- whole_archive_flag_spec=' ' -- archive_cmds_need_lc=yes -- # This is similar to how AIX traditionally builds it's shared libraries. -- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -- fi -- fi -- ;; -+done -+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -+rm -f conftest.i conftest.err conftest.$ac_ext -+if $ac_preproc_ok; then : ++ _LT_PROG_XSI_SHELLFNS -- amigaos*) -- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -- hardcode_libdir_flag_spec='-L$libdir' -- hardcode_minus_L=yes -- # see comment about different semantics on the GNU ld section -- ld_shlibs=no -- ;; -+else -+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -+_lt_caught_CXX_error=yes; } -+fi +-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +-# ------------------------------------------------------------------ +-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +-if test "$cross_compiling" = yes; then : +- [$4] +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext <> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) + +-#if HAVE_DLFCN_H +-#include +-#endif ++ mv -f "$cfgfile" "$ofile" || ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++], ++[cat <<_LT_EOF >> "$ofile" + +-#include ++dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded ++dnl in a comment (ie after a #). ++# ### BEGIN LIBTOOL TAG CONFIG: $1 ++_LT_LIBTOOL_TAG_VARS(_LT_TAG) ++# ### END LIBTOOL TAG CONFIG: $1 ++_LT_EOF ++])dnl /m4_if ++], ++[m4_if([$1], [], [ ++ PACKAGE='$PACKAGE' ++ VERSION='$VERSION' ++ TIMESTAMP='$TIMESTAMP' ++ RM='$RM' ++ ofile='$ofile'], []) ++])dnl /_LT_CONFIG_SAVE_COMMANDS ++])# _LT_CONFIG ++ ++ ++# LT_SUPPORTED_TAG(TAG) ++# --------------------- ++# Trace this macro to discover what tags are supported by the libtool ++# --tag option, using: ++# autoconf --trace 'LT_SUPPORTED_TAG:$1' ++AC_DEFUN([LT_SUPPORTED_TAG], []) ++ ++ ++# C support is built-in for now ++m4_define([_LT_LANG_C_enabled], []) ++m4_define([_LT_TAGS], []) + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++# LT_LANG(LANG) ++# ------------- ++# Enable libtool support for the given language if not already enabled. ++AC_DEFUN([LT_LANG], ++[AC_BEFORE([$0], [LT_OUTPUT])dnl ++m4_case([$1], ++ [C], [_LT_LANG(C)], ++ [C++], [_LT_LANG(CXX)], ++ [Java], [_LT_LANG(GCJ)], ++ [Fortran 77], [_LT_LANG(F77)], ++ [Fortran], [_LT_LANG(FC)], ++ [Windows Resource], [_LT_LANG(RC)], ++ [m4_ifdef([_LT_LANG_]$1[_CONFIG], ++ [_LT_LANG($1)], ++ [m4_fatal([$0: unsupported language: "$1"])])])dnl ++])# LT_LANG -- bsdi4*) -- export_dynamic_flag_spec=-rdynamic -- ;; -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif -- cygwin* | mingw* | pw32*) -- # When not using gcc, we currently assume that we are using -- # Microsoft Visual C++. -- # hardcode_libdir_flag_spec is actually meaningless, as there is -- # no search path for DLLs. -- hardcode_libdir_flag_spec=' ' -- allow_undefined_flag=unsupported -- # Tell ltmain to make .lib files, not .a files. -- libext=lib -- # Tell ltmain to make .dll files, not .so files. -- shrext_cmds=".dll" -- # FIXME: Setting linknames here is a bad hack. -- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' -- # The linker will automatically build a .lib file if we build a DLL. -- old_archive_From_new_cmds='true' -- # FIXME: Should let the user specify the lib program. -- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' -- fix_srcfile_path='`cygpath -w "$srcfile"`' -- enable_shared_with_static_runtimes=yes -- ;; -+else -+ _lt_caught_CXX_error=yes -+fi +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++# _LT_LANG(LANGNAME) ++# ------------------ ++m4_defun([_LT_LANG], ++[m4_ifdef([_LT_LANG_]$1[_enabled], [], ++ [LT_SUPPORTED_TAG([$1])dnl ++ m4_append([_LT_TAGS], [$1 ])dnl ++ m4_define([_LT_LANG_]$1[_enabled], [])dnl ++ _LT_LANG_$1_CONFIG($1)])dnl ++])# _LT_LANG -- darwin* | rhapsody*) -- if test "$GXX" = yes ; then -- archive_cmds_need_lc=no -- case "$host_os" in -- rhapsody* | darwin1.[012]) -- allow_undefined_flag='-undefined suppress' -- ;; -- *) # Darwin 1.3 on -- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then -- allow_undefined_flag='-flat_namespace -undefined suppress' -- else -- case ${MACOSX_DEPLOYMENT_TARGET} in -- 10.[012]) -- allow_undefined_flag='-flat_namespace -undefined suppress' -- ;; -- 10.*) -- allow_undefined_flag='-undefined dynamic_lookup' -- ;; -- esac -- fi -- ;; -- esac -- lt_int_apple_cc_single_mod=no -- output_verbose_link_cmd='echo' -- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then -- lt_int_apple_cc_single_mod=yes -- fi -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- archive_cmds='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' -- else -- archive_cmds='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' -- fi -- module_cmds='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' -- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- else -- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- fi -- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- hardcode_direct=no -- hardcode_automatic=yes -- hardcode_shlibpath_var=unsupported -- whole_archive_flag_spec='-all_load $convenience' -- link_all_deplibs=yes -- else -- ld_shlibs=no -- fi -- ;; +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } -- dgux*) -- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_libdir_flag_spec='-L$libdir' -- hardcode_shlibpath_var=no -- ;; +- exit (status); +-}] +-EOF +- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) $1 ;; +- x$lt_dlneed_uscore) $2 ;; +- x$lt_unknown|x*) $3 ;; +- esac +- else : +- # compilation failed +- $3 +- fi +-fi +-rm -fr conftest* +-])# _LT_AC_TRY_DLOPEN_SELF ++# _LT_LANG_DEFAULT_CONFIG ++# ----------------------- ++m4_defun([_LT_LANG_DEFAULT_CONFIG], ++[AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [LT_LANG(CXX)], ++ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) ++ ++AC_PROVIDE_IFELSE([AC_PROG_F77], ++ [LT_LANG(F77)], ++ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) ++ ++AC_PROVIDE_IFELSE([AC_PROG_FC], ++ [LT_LANG(FC)], ++ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) ++ ++dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal ++dnl pulling things in needlessly. ++AC_PROVIDE_IFELSE([AC_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [AC_PROVIDE_IFELSE([LT_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [m4_ifdef([AC_PROG_GCJ], ++ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) ++ m4_ifdef([A][M_PROG_GCJ], ++ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) ++ m4_ifdef([LT_PROG_GCJ], ++ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) ++ ++AC_PROVIDE_IFELSE([LT_PROG_RC], ++ [LT_LANG(RC)], ++ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ++])# _LT_LANG_DEFAULT_CONFIG ++ ++# Obsolete macros: ++AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) ++AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) ++AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) ++AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_CXX], []) ++dnl AC_DEFUN([AC_LIBTOOL_F77], []) ++dnl AC_DEFUN([AC_LIBTOOL_FC], []) ++dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) -- freebsd1*) -- ld_shlibs=no -- ;; -- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor -- # support. Future versions do this automatically, but an explicit c++rt0.o -- # does not break anything, and helps significantly (at the cost of a little -- # extra space). -- freebsd2.2*) -- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' -- hardcode_libdir_flag_spec='-R$libdir' -- hardcode_direct=yes -- hardcode_shlibpath_var=no -- ;; +-# AC_LIBTOOL_DLOPEN_SELF +-# ------------------- +-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= ++# _LT_TAG_COMPILER ++# ---------------- ++m4_defun([_LT_TAG_COMPILER], ++[AC_REQUIRE([AC_PROG_CC])dnl -- # Unfortunately, older versions of FreeBSD 2 do not have this feature. -- freebsd2*) -- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct=yes -- hardcode_minus_L=yes -- hardcode_shlibpath_var=no -- ;; -+# Set options +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ;; ++_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl ++_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl ++_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl ++_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl -- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. -- freebsd* | kfreebsd*-gnu) -- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' -- hardcode_libdir_flag_spec='-R$libdir' -- hardcode_direct=yes -- hardcode_shlibpath_var=no -- ;; +- mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} -- hpux9*) -- if test "$GCC" = yes; then -- archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -- else -- archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -- fi -- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' -- hardcode_libdir_separator=: -- hardcode_direct=yes +- cygwin*) +- lt_cv_dlopen="dlopen" +- lt_cv_dlopen_libs= +- ;; ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- hardcode_minus_L=yes -- export_dynamic_flag_spec='${wl}-E' -- ;; -+ enable_dlopen=no +- darwin*) +- # if libdl is installed we need to link against it +- AC_CHECK_LIB([dl], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ]) +- ;; ++# Allow CC to be a program name with arguments. ++compiler=$CC ++])# _LT_TAG_COMPILER -- hpux10* | hpux11*) -- if test "$GCC" = yes -a "$with_gnu_ld" = no; then -- case "$host_cpu" in -- hppa*64*|ia64*) -- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- ;; -- *) -- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -- ;; -- esac -- else -- case "$host_cpu" in -- hppa*64*|ia64*) -- archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' -- ;; -- *) -- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -- ;; -- esac -- fi -- if test "$with_gnu_ld" = no; then -- case "$host_cpu" in -- hppa*64*) -- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' -- hardcode_libdir_flag_spec_ld='+b $libdir' -- hardcode_libdir_separator=: -- hardcode_direct=no -- hardcode_shlibpath_var=no -- ;; -- ia64*) -- hardcode_libdir_flag_spec='-L$libdir' -- hardcode_direct=no -- hardcode_shlibpath_var=no +- *) +- AC_CHECK_FUNC([shl_load], +- [lt_cv_dlopen="shl_load"], +- [AC_CHECK_LIB([dld], [shl_load], +- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], +- [AC_CHECK_FUNC([dlopen], +- [lt_cv_dlopen="dlopen"], +- [AC_CHECK_LIB([dl], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], +- [AC_CHECK_LIB([svld], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], +- [AC_CHECK_LIB([dld], [dld_link], +- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) +- ]) +- ]) +- ]) +- ]) +- ]) +- ;; +- esac -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- hardcode_minus_L=yes -- ;; -- *) -- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' -- hardcode_libdir_separator=: -- hardcode_direct=yes -- export_dynamic_flag_spec='${wl}-E' -+ enable_win32_dll=no +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no +- fi +- +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +- +- save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++# _LT_COMPILER_BOILERPLATE ++# ------------------------ ++# Check for compiler boilerplate output or warnings with ++# the simple compiler test code. ++m4_defun([_LT_COMPILER_BOILERPLATE], ++[m4_require([_LT_DECL_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$RM conftest* ++])# _LT_COMPILER_BOILERPLATE -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- hardcode_minus_L=yes -- ;; -- esac -- fi -- ;; +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" -- irix5* | irix6* | nonstopux*) -- if test "$GCC" = yes; then -- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- else -- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- hardcode_libdir_flag_spec_ld='-rpath $libdir' -- fi -- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator=: -- link_all_deplibs=yes -+ # Check whether --enable-shared was given. -+if test "${enable_shared+set}" = set; then : -+ enableval=$enable_shared; p=${PACKAGE-default} -+ case $enableval in -+ yes) enable_shared=yes ;; -+ no) enable_shared=no ;; -+ *) -+ enable_shared=no -+ # Look at the argument we got. We use all the common list separators. -+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -+ for pkg in $enableval; do -+ IFS="$lt_save_ifs" -+ if test "X$pkg" = "X$p"; then -+ enable_shared=yes +- AC_CACHE_CHECK([whether a program can dlopen itself], +- lt_cv_dlopen_self, [dnl +- _LT_AC_TRY_DLOPEN_SELF( +- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, +- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ++# _LT_LINKER_BOILERPLATE ++# ---------------------- ++# Check for linker boilerplate output or warnings with ++# the simple link test code. ++m4_defun([_LT_LINKER_BOILERPLATE], ++[m4_require([_LT_DECL_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$RM -r conftest* ++])# _LT_LINKER_BOILERPLATE ++ ++# _LT_REQUIRED_DARWIN_CHECKS ++# ------------------------- ++m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ ++ case $host_os in ++ rhapsody* | darwin*) ++ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) ++ AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) ++ AC_CHECK_TOOL([LIPO], [lipo], [:]) ++ AC_CHECK_TOOL([OTOOL], [otool], [:]) ++ AC_CHECK_TOOL([OTOOL64], [otool64], [:]) ++ _LT_DECL([], [DSYMUTIL], [1], ++ [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) ++ _LT_DECL([], [NMEDIT], [1], ++ [Tool to change global to local symbols on Mac OS X]) ++ _LT_DECL([], [LIPO], [1], ++ [Tool to manipulate fat objects and archives on Mac OS X]) ++ _LT_DECL([], [OTOOL], [1], ++ [ldd/readelf like tool for Mach-O binaries on Mac OS X]) ++ _LT_DECL([], [OTOOL64], [1], ++ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) ++ ++ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], ++ [lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ rm -rf libconftest.dylib* ++ echo "int foo(void){return 1;}" > conftest.c ++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err ++ _lt_result=$? ++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then ++ lt_cv_apple_cc_single_mod=yes ++ else ++ cat conftest.err >&AS_MESSAGE_LOG_FD + fi -+ done -+ IFS="$lt_save_ifs" - ;; -+ esac -+else -+ enable_shared=yes -+fi - -- netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out -- else -- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF -- fi -- hardcode_libdir_flag_spec='-R$libdir' -- hardcode_direct=yes -- hardcode_shlibpath_var=no -- ;; - -- newsos6) -- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct=yes -- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator=: -- hardcode_shlibpath_var=no -- ;; ++ rm -rf libconftest.dylib* ++ rm -f conftest.* ++ fi]) ++ AC_CACHE_CHECK([for -exported_symbols_list linker flag], ++ [lt_cv_ld_exported_symbols_list], ++ [lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], ++ [lt_cv_ld_exported_symbols_list=yes], ++ [lt_cv_ld_exported_symbols_list=no]) ++ LDFLAGS="$save_LDFLAGS" + ]) +- +- if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" +- AC_CACHE_CHECK([whether a statically linked program can dlopen itself], +- lt_cv_dlopen_self_static, [dnl +- _LT_AC_TRY_DLOPEN_SELF( +- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, +- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) +- ]) ++ case $host_os in ++ rhapsody* | darwin1.[[012]]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) # darwin 5.x on ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[[012]]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ esac ++ ;; ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' ++ else ++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil='~$DSYMUTIL $lib || :' ++ else ++ _lt_dsymutil= + fi - -- openbsd*) -- hardcode_direct=yes -- hardcode_shlibpath_var=no -- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' -- export_dynamic_flag_spec='${wl}-E' -- else -- case $host_os in -- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) -- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- hardcode_libdir_flag_spec='-R$libdir' -- ;; -- *) -- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' -- ;; -- esac -- fi -- ;; - -- os2*) -- hardcode_libdir_flag_spec='-L$libdir' -- hardcode_minus_L=yes -- allow_undefined_flag=unsupported -- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' -- old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' -- ;; - -- osf3*) -- if test "$GCC" = yes; then -- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- else -- allow_undefined_flag=' -expect_unresolved \*' -- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- fi -- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator=: -- ;; - -- osf4* | osf5*) # as osf3* with the addition of -msym flag -- if test "$GCC" = yes; then -- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -- else -- allow_undefined_flag=' -expect_unresolved \*' -- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ -- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" + ;; + esac ++]) -- # Both c and cxx compiler support -rpath directly -- hardcode_libdir_flag_spec='-rpath $libdir' -- fi -- hardcode_libdir_separator=: -- ;; +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac -- sco3.2v5*) -- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_shlibpath_var=no -- export_dynamic_flag_spec='${wl}-Bexport' -- runpath_var=LD_RUN_PATH -- hardcode_runpath_var=yes -- ;; +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; ++# _LT_DARWIN_LINKER_FEATURES ++# -------------------------- ++# Checks for linker and compiler features on darwin ++m4_defun([_LT_DARWIN_LINKER_FEATURES], ++[ ++ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_automatic, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" ++ case $cc_basename in ++ ifort*) _lt_dar_can_shared=yes ;; ++ *) _lt_dar_can_shared=$GCC ;; + esac +-fi +-])# AC_LIBTOOL_DLOPEN_SELF +- ++ if test "$_lt_dar_can_shared" = "yes"; then ++ output_verbose_link_cmd=echo ++ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ m4_if([$1], [CXX], ++[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then ++ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" ++ fi ++],[]) ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++]) -- solaris*) -- no_undefined_flag=' -z text' -- if test "$GCC" = yes; then -- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' -- else -- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' -- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' -- fi -- hardcode_libdir_flag_spec='-R$libdir' -- hardcode_shlibpath_var=no -- case $host_os in -- solaris2.[0-5] | solaris2.[0-5].*) ;; -- *) # Supported since Solaris 2.6 (maybe 2.5.1?) -- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; -- esac -- link_all_deplibs=yes -- ;; +-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +-# --------------------------------- +-# Check to see if options -c and -o are simultaneously supported by compiler +-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], +- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], +- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++# _LT_SYS_MODULE_PATH_AIX ++# ----------------------- ++# Links a minimal program and checks the executable ++# for the system default hardcoded library path. In most cases, ++# this is /usr/lib:/lib, but when the MPI compilers are used ++# the location of the communication and MPI libs are included too. ++# If we don't find anything, use the default library path according ++# to the aix ld manual. ++m4_defun([_LT_SYS_MODULE_PATH_AIX], ++[m4_require([_LT_DECL_SED])dnl ++AC_LINK_IFELSE(AC_LANG_PROGRAM,[ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$.*$$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi],[]) ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++])# _LT_SYS_MODULE_PATH_AIX -- sunos4*) -- if test "x$host_vendor" = xsequent; then -- # Use $CC to link under sequent, because it throws in some extra .o -- # files that make .init and .fini sections work. -- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' -- else -- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' -- fi -- hardcode_libdir_flag_spec='-L$libdir' -- hardcode_direct=yes -- hardcode_minus_L=yes -- hardcode_shlibpath_var=no -+ # Check whether --enable-static was given. -+if test "${enable_static+set}" = set; then : -+ enableval=$enable_static; p=${PACKAGE-default} -+ case $enableval in -+ yes) enable_static=yes ;; -+ no) enable_static=no ;; -+ *) -+ enable_static=no -+ # Look at the argument we got. We use all the common list separators. -+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -+ for pkg in $enableval; do -+ IFS="$lt_save_ifs" -+ if test "X$pkg" = "X$p"; then -+ enable_static=yes -+ fi -+ done -+ IFS="$lt_save_ifs" - ;; -+ esac -+else -+ enable_static=yes -+fi +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ +- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&AS_MESSAGE_LOG_FD +- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s out/conftest.err; then +- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes +- fi +- fi +- chmod u+w . +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* +-]) +-])# AC_LIBTOOL_PROG_CC_C_O -- sysv4) -- case $host_vendor in -- sni) -- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct=yes # is this really true??? -- ;; -- siemens) -- ## LD is ld it makes a PLAMLIB -- ## CC just makes a GrossModule. -- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' -- reload_cmds='$CC -r -o $output$reload_objs' -- hardcode_direct=no -- ;; -- motorola) -- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct=no #Motorola manual says yes, but my tests say they lie -- ;; -- esac -- runpath_var='LD_RUN_PATH' -- hardcode_shlibpath_var=no -- ;; ++# _LT_SHELL_INIT(ARG) ++# ------------------- ++m4_define([_LT_SHELL_INIT], ++[ifdef([AC_DIVERSION_NOTICE], ++ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], ++ [AC_DIVERT_PUSH(NOTICE)]) ++$1 ++AC_DIVERT_POP ++])# _LT_SHELL_INIT -- sysv4.3*) -- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_shlibpath_var=no -- export_dynamic_flag_spec='-Bexport' -- ;; +-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +-# ----------------------------------------- +-# Check to see if we can do hard links to lock some files if needed +-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +-[AC_REQUIRE([_LT_AC_LOCK])dnl -- sysv4*MP*) -- if test -d /usr/nec; then -- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_shlibpath_var=no -- runpath_var=LD_RUN_PATH -- hardcode_runpath_var=yes -- ld_shlibs=yes -- fi -- ;; +-hard_links="nottested" +-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- AC_MSG_CHECKING([if we can lock with hard links]) +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- AC_MSG_RESULT([$hard_links]) +- if test "$hard_links" = no; then +- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) +- need_locks=warn +- fi +-else +- need_locks=no +-fi +-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS ++# _LT_PROG_ECHO_BACKSLASH ++# ----------------------- ++# Add some code to the start of the generated configure script which ++# will find an echo command which doesn't interpret backslashes. ++m4_defun([_LT_PROG_ECHO_BACKSLASH], ++[_LT_SHELL_INIT([ ++# Check that we are running under the correct shell. ++SHELL=${CONFIG_SHELL-/bin/sh} -- sysv4.2uw2*) -- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct=yes -- hardcode_minus_L=no -- hardcode_shlibpath_var=no -- hardcode_runpath_var=yes -- runpath_var=LD_RUN_PATH -- ;; ++case X$lt_ECHO in ++X*--fallback-echo) ++ # Remove one level of quotation (which was required for Make). ++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ++ ;; ++esac -- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) -- no_undefined_flag='${wl}-z ${wl}text' -- if test "$GCC" = yes; then -- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- else -- archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- fi -- runpath_var='LD_RUN_PATH' -- hardcode_shlibpath_var=no -- ;; +-# AC_LIBTOOL_OBJDIR +-# ----------------- +-AC_DEFUN([AC_LIBTOOL_OBJDIR], +-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +-[rm -f .libs 2>/dev/null +-mkdir .libs 2>/dev/null +-if test -d .libs; then +- lt_cv_objdir=.libs ++ECHO=${lt_ECHO-echo} ++if test "X[$]1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++elif test "X[$]1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $ECHO works! ++ : + else +- # MS-DOS does not allow filenames that begin with a dot. +- lt_cv_objdir=_libs ++ # Restart under the correct shell. ++ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} + fi +-rmdir .libs 2>/dev/null]) +-objdir=$lt_cv_objdir +-])# AC_LIBTOOL_OBJDIR -- sysv5*) -- no_undefined_flag=' -z text' -- # $CC -shared without GNU ld will not create a library from C++ -- # object files and a static libstdc++, better avoid it by now -- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' -- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' -- hardcode_libdir_flag_spec= -- hardcode_shlibpath_var=no -- runpath_var='LD_RUN_PATH' -- ;; ++if test "X[$]1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat <<_LT_EOF ++[$]* ++_LT_EOF ++ exit 0 ++fi -- uts4*) -- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_libdir_flag_spec='-L$libdir' -- hardcode_shlibpath_var=no -- ;; +-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +-# ---------------------------------------------- +-# Check hardcoding attributes. +-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +-[AC_MSG_CHECKING([how to hardcode library paths into programs]) +-_LT_AC_TAGVAR(hardcode_action, $1)= +-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ +- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ +- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -- *) -- ld_shlibs=no -- ;; -- esac -- fi +- # We can hardcode non-existant directories. +- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && +- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then +- # Linking always hardcodes the temporary library directory. +- _LT_AC_TAGVAR(hardcode_action, $1)=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- _LT_AC_TAGVAR(hardcode_action, $1)=immediate ++if test -z "$lt_ECHO"; then ++ if test "X${echo_test_string+set}" != Xset; then ++ # find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if { echo_test_string=`eval $cmd`; } 2>/dev/null && ++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null ++ then ++ break ++ fi ++ done + fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +-fi +-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) --echo "$as_me:$LINENO: result: $ld_shlibs" >&5 --echo "${ECHO_T}$ld_shlibs" >&6 --test "$ld_shlibs" = no && can_build_shared=no +-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi +-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++ else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. --variables_saved_for_relink="PATH $shlibpath_var $runpath_var" --if test "$GCC" = yes; then -- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -+# Check whether --with-pic was given. -+if test "${with_pic+set}" = set; then : -+ withval=$with_pic; pic_mode="$withval" -+else -+ pic_mode=default - fi ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$dir/echo" ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" --# --# Do we need to explicitly link libc? --# --case "x$archive_cmds_need_lc" in --x|xyes) -- # Assume -lc should be added -- archive_cmds_need_lc=yes +-# AC_LIBTOOL_SYS_LIB_STRIP +-# ------------------------ +-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +-[striplib= +-old_striplib= +-AC_MSG_CHECKING([whether stripping libraries is possible]) +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- AC_MSG_RESULT([yes]) +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- AC_MSG_RESULT([yes]) +- else +- AC_MSG_RESULT([no]) +-fi +- ;; +- *) +- AC_MSG_RESULT([no]) +- ;; +- esac +-fi +-])# AC_LIBTOOL_SYS_LIB_STRIP ++ if test "X$ECHO" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ ECHO='print -r' ++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} ++ else ++ # Try using printf. ++ ECHO='printf %s\n' ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: -- if test "$enable_shared" = yes && test "$GCC" = yes; then -- case $archive_cmds in -- *'~'*) -- # FIXME: we may have to deal with multi-command sequences. -- ;; -- '$CC '*) -- # Test whether the compiler implicitly links with -lc since on some -- # systems, -lgcc has to come before -lc. If gcc already passes -lc -- # to ld, don't add -lc before -lgcc. -- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 --echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 -- $rm conftest* -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -+test -z "$pic_mode" && pic_mode=default ++ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do ++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" ++ done -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } 2>conftest.err; then -- soname=conftest -- lib=conftest -- libobjs=conftest.$ac_objext -- deplibs= -- wl=$lt_prog_compiler_wl -- compiler_flags=-v -- linker_flags=-v -- verstring= -- output_objdir=. -- libname=conftest -- lt_save_allow_undefined_flag=$allow_undefined_flag -- allow_undefined_flag= -- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 -- (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } -- then -- archive_cmds_need_lc=no -- else -- archive_cmds_need_lc=yes -- fi -- allow_undefined_flag=$lt_save_allow_undefined_flag -- else -- cat conftest.err 1>&5 -- fi -- $rm conftest* -- echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 --echo "${ECHO_T}$archive_cmds_need_lc" >&6 -+ -+ -+ -+ -+ -+ -+ # Check whether --enable-fast-install was given. -+if test "${enable_fast_install+set}" = set; then : -+ enableval=$enable_fast_install; p=${PACKAGE-default} -+ case $enableval in -+ yes) enable_fast_install=yes ;; -+ no) enable_fast_install=no ;; -+ *) -+ enable_fast_install=no -+ # Look at the argument we got. We use all the common list separators. -+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -+ for pkg in $enableval; do -+ IFS="$lt_save_ifs" -+ if test "X$pkg" = "X$p"; then -+ enable_fast_install=yes -+ fi -+ done -+ IFS="$lt_save_ifs" - ;; - esac -- fi -- ;; --esac -- --echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 --echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +-# AC_LIBTOOL_SYS_DYNAMIC_LINKER +-# ----------------------------- +-# PORTME Fill in your ld.so characteristics +-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +-[AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= @@ -43749,10 +4485,20 @@ - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -- fi - else ++ if test "$prev" != 'sed 50q "[$]0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ ECHO=echo ++ fi ++ fi ++ fi ++ fi + fi +-else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -+ enable_fast_install=yes fi -need_lib_prefix=unknown -hardcode_into_libs=no @@ -43760,12 +4506,24 @@ -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown ++# Copy echo and quote the copy suitably for passing to libtool from ++# the Makefile, instead of quoting the original, which is used later. ++lt_ECHO=$ECHO ++if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ++ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" ++fi -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH ++AC_SUBST(lt_ECHO) ++]) ++_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) ++_LT_DECL([], [ECHO], [1], ++ [An echo program that does not interpret backslashes]) ++])# _LT_PROG_ECHO_BACKSLASH - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' @@ -43787,7 +4545,7 @@ - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in -- aix4 | aix4.[01] | aix4.[01].*) +- aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then @@ -43796,7 +4554,29 @@ - can_build_shared=no - fi - ;; -- esac ++# _LT_ENABLE_LOCK ++# --------------- ++m4_defun([_LT_ENABLE_LOCK], ++[AC_ARG_ENABLE([libtool-lock], ++ [AS_HELP_STRING([--disable-libtool-lock], ++ [avoid locking (might break parallel builds)])]) ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++ ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; + esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. @@ -43805,27 +4585,105 @@ - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- else ++ fi ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '[#]line __oline__ "configure"' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac + else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' -- fi ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac + fi - shlibpath_var=LIBPATH -- fi -- ;; + fi ++ rm -rf conftest* + ;; -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. -- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[[^/]]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - +- -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH -- ;; ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|s390*-*tpf*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*|s390*-*tpf*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* + ;; -bsdi4*) - version_type=linux @@ -43839,14 +4697,26 @@ - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs -- ;; - ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, ++ [AC_LANG_PUSH(C) ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) ++ AC_LANG_POP]) ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi + ;; +- -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - +- - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' @@ -43860,18 +4730,18 @@ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - +- - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' -- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix -- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then +- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the @@ -43885,22 +4755,34 @@ - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' -- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' -- ;; -- esac +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac + ;; + esac - ;; - +- - *) -- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; -+# This can be used to rebuild libtool when needed -+LIBTOOL_DEPS="$ltmain" - +- -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin @@ -43916,11 +4798,11 @@ - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' -- fi + fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' -- ;; -+# Always use our own libtool. -+LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++ rm -rf conftest* + ;; ++esac -dgux*) - version_type=linux @@ -43930,6 +4812,8 @@ - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; ++need_locks="$enable_libtool_lock" ++])# _LT_ENABLE_LOCK -freebsd1*) - dynamic_linker=no @@ -43946,6 +4830,14 @@ - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; ++# _LT_CMD_OLD_ARCHIVE ++# ------------------- ++m4_defun([_LT_CMD_OLD_ARCHIVE], ++[AC_CHECK_TOOL(AR, ar, false) ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++_LT_DECL([], [AR], [1], [The archiver]) ++_LT_DECL([], [AR_FLAGS], [1]) -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` @@ -43962,20 +4854,46 @@ - ;; - esac - shlibpath_var=LD_LIBRARY_PATH -- case $host_os in ++AC_CHECK_TOOL(STRIP, strip, :) ++test -z "$STRIP" && STRIP=: ++_LT_DECL([], [STRIP], [1], [A symbol stripping program]) ++ ++AC_CHECK_TOOL(RANLIB, ranlib, :) ++test -z "$RANLIB" && RANLIB=: ++_LT_DECL([], [RANLIB], [1], ++ [Commands used to install an old-style archive]) ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= ++ ++if test -n "$RANLIB"; then + case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; -- freebsd3.01* | freebsdelf3.01*) +- freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes -- ;; ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes -- ;; -- esac ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac - ;; ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++_LT_DECL([], [old_postinstall_cmds], [2]) ++_LT_DECL([], [old_postuninstall_cmds], [2]) ++_LT_TAGDECL([], [old_archive_cmds], [2], ++ [Commands used to build an old-style archive]) ++])# _LT_CMD_OLD_ARCHIVE -gnu*) - version_type=linux @@ -44032,6 +4950,43 @@ - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; ++# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ---------------------------------------------------------------- ++# Check whether the given compiler option works ++AC_DEFUN([_LT_COMPILER_OPTION], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$3" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ fi ++ $RM conftest* ++]) -irix5* | irix6* | nonstopux*) - case $host_os in @@ -44050,7 +5005,81 @@ - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= -- ;; ++if test x"[$]$2" = xyes; then ++ m4_if([$5], , :, [$5]) ++else ++ m4_if([$6], , :, [$6]) ++fi ++])# _LT_COMPILER_OPTION ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) ++ ++ ++# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ---------------------------------------------------- ++# Check whether the given linker option works ++AC_DEFUN([_LT_LINKER_OPTION], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $3" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&AS_MESSAGE_LOG_FD ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ else ++ $2=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++]) ++ ++if test x"[$]$2" = xyes; then ++ m4_if([$4], , :, [$4]) ++else ++ m4_if([$5], , :, [$5]) ++fi ++])# _LT_LINKER_OPTION ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) ++ ++ ++# LT_CMD_MAX_LEN ++#--------------- ++AC_DEFUN([LT_CMD_MAX_LEN], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++# find the maximum length of command line arguments ++AC_MSG_CHECKING([the maximum length of command line arguments]) ++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl ++ i=0 ++ teststring="ABCD" ++ ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") @@ -44061,7 +5090,13 @@ - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac -- ;; ++ ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; + ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no @@ -44074,6 +5109,16 @@ -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; ++ cygwin* | mingw* | cegcc*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; -# This must be Linux ELF. -linux*) @@ -44089,33 +5134,119 @@ - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; - # find out which ABI we are using - libsuff= - case "$host_cpu" in - x86_64*|s390x*|powerpc64*) -- echo '#line 7896 "configure"' > conftest.$ac_ext -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then +- echo '[#]line __oline__ "configure"' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; -- esac -- fi ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi - rm -rf conftest* -- ;; -- esac ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi + ;; + esac ++]) ++if test -n $lt_cv_sys_max_cmd_len ; then ++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len) ++else ++ AC_MSG_RESULT(none) ++fi ++max_cmd_len=$lt_cv_sys_max_cmd_len ++_LT_DECL([], [max_cmd_len], [0], ++ [What is the maximum length of a command?]) ++])# LT_CMD_MAX_LEN - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then -- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` +- lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi ++# Old name: ++AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the @@ -44137,6 +5268,11 @@ - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; ++# _LT_HEADER_DLFCN ++# ---------------- ++m4_defun([_LT_HEADER_DLFCN], ++[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ++])# _LT_HEADER_DLFCN -netbsd*) - version_type=sunos @@ -44162,6 +5298,19 @@ - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; ++# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, ++# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) ++# ---------------------------------------------------------------- ++m4_defun([_LT_TRY_DLOPEN_SELF], ++[m4_require([_LT_HEADER_DLFCN])dnl ++if test "$cross_compiling" = yes; then : ++ [$4] ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++[#line __oline__ "configure" ++#include "confdefs.h" -nto-qnx*) - version_type=linux @@ -44172,6 +5321,9 @@ - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; ++#if HAVE_DLFCN_H ++#include ++#endif -openbsd*) - version_type=sunos @@ -44182,7 +5334,7 @@ - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in -- openbsd2.[89] | openbsd2.[89].*) +- openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) @@ -44193,6 +5345,7 @@ - shlibpath_overrides_runpath=yes - fi - ;; ++#include -os2*) - libname_spec='$name' @@ -44202,6 +5355,15 @@ - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif -osf3* | osf4* | osf5*) - version_type=osf @@ -44213,6 +5375,27 @@ - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif -sco3.2v5*) - version_type=osf @@ -44220,6 +5403,11 @@ - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; -solaris*) - version_type=linux @@ -44233,6 +5421,14 @@ - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); -sunos4*) - version_type=sunos @@ -44242,9 +5438,26 @@ - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no -- fi ++ return status; ++}] ++_LT_EOF ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) $1 ;; ++ x$lt_dlneed_uscore) $2 ;; ++ x$lt_dlunknown|x*) $3 ;; ++ esac ++ else : ++ # compilation failed ++ $3 + fi - need_version=yes - ;; ++fi ++rm -fr conftest* ++])# _LT_TRY_DLOPEN_SELF -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux @@ -44278,6 +5491,17 @@ - shlibpath_var=LD_LIBRARY_PATH - fi - ;; ++# LT_SYS_DLOPEN_SELF ++# ------------------ ++AC_DEFUN([LT_SYS_DLOPEN_SELF], ++[m4_require([_LT_HEADER_DLFCN])dnl ++if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= -uts4*) - version_type=linux @@ -44285,207 +5509,437 @@ - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -+test -z "$LN_S" && LN_S="ln -s" ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; -*) - dynamic_linker=no - ;; -esac --echo "$as_me:$LINENO: result: $dynamic_linker" >&5 --echo "${ECHO_T}$dynamic_linker" >&6 +-AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no +-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER ++ mingw* | pw32* | cegcc*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; --echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 --echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 --hardcode_action= --if test -n "$hardcode_libdir_flag_spec" || \ -- test -n "$runpath_var " || \ -- test "X$hardcode_automatic"="Xyes" ; then ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; -- # We can hardcode non-existant directories. -- if test "$hardcode_direct" != no && -- # If the only mechanism to avoid hardcoding is shlibpath_var, we -- # have to relink, otherwise we might link with an installed library -- # when we should be linking with a yet-to-be-installed one -- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && -- test "$hardcode_minus_L" != no; then -- # Linking always hardcodes the temporary library directory. -- hardcode_action=relink -- else -- # We can link without hardcoding, and we can hardcode nonexisting dirs. -- hardcode_action=immediate +-# _LT_AC_TAGCONFIG +-# ---------------- +-AC_DEFUN([_LT_AC_TAGCONFIG], +-[AC_ARG_WITH([tags], +- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], +- [include additional configurations @<:@automatic@:>@])], +- [tagnames="$withval"]) +- +-if test -f "$ltmain" && test -n "$tagnames"; then +- if test ! -f "${ofile}"; then +- AC_MSG_WARN([output file `$ofile' does not exist]) - fi --else -- # We cannot hardcode anything, or else we can only hardcode existing -- # directories. -- hardcode_action=unsupported --fi --echo "$as_me:$LINENO: result: $hardcode_action" >&5 --echo "${ECHO_T}$hardcode_action" >&6 ++ darwin*) ++ # if libdl is installed we need to link against it ++ AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ]) ++ ;; --if test "$hardcode_action" = relink; then -- # Fast installation is not supported -- enable_fast_install=no --elif test "$shlibpath_overrides_runpath" = yes || -- test "$enable_shared" = no; then -- # Fast installation is not necessary -- enable_fast_install=needless --fi +- if test -z "$LTCC"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCC='`" +- if test -z "$LTCC"; then +- AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) +- else +- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) +- fi ++ *) ++ AC_CHECK_FUNC([shl_load], ++ [lt_cv_dlopen="shl_load"], ++ [AC_CHECK_LIB([dld], [shl_load], ++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], ++ [AC_CHECK_FUNC([dlopen], ++ [lt_cv_dlopen="dlopen"], ++ [AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], ++ [AC_CHECK_LIB([svld], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], ++ [AC_CHECK_LIB([dld], [dld_link], ++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ;; ++ esac ++ ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no + fi --striplib= --old_striplib= --echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 --echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 --if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then -- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" -- test -z "$striplib" && striplib="$STRIP --strip-unneeded" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 --else --# FIXME - insert some real tests, host_os isn't really good enough -- case $host_os in -- darwin*) -- if test -n "$STRIP" ; then -- striplib="$STRIP -x" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -- else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- ;; -- *) -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -- ;; -- esac --fi +- # Extract list of available tagged configurations in $ofile. +- # Note that this assumes the entire list is on one line. +- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=$.*$$/\1/' -e 's/\"//g'` ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" --if test "x$enable_dlopen" != xyes; then -- enable_dlopen=unknown -- enable_dlopen_self=unknown -- enable_dlopen_self_static=unknown --else -- lt_cv_dlopen=no -- lt_cv_dlopen_libs= +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for tagname in $tagnames; do +- IFS="$lt_save_ifs" +- # Check whether tagname contains only valid characters +- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in +- "") ;; +- *) AC_MSG_ERROR([invalid tag name: $tagname]) +- ;; +- esac ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" -- case $host_os in -- beos*) -- lt_cv_dlopen="load_add_on" -- lt_cv_dlopen_libs= -- lt_cv_dlopen_self=yes -- ;; +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null +- then +- AC_MSG_ERROR([tag name \"$tagname\" already exists]) +- fi ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" -- mingw* | pw32*) -- lt_cv_dlopen="LoadLibrary" -- lt_cv_dlopen_libs= -- ;; +- # Update the list of available tags. +- if test -n "$tagname"; then +- echo appending configuration tag \"$tagname\" to $ofile +- +- case $tagname in +- CXX) +- if test -n "$CXX" && test "X$CXX" != "Xno"; then +- AC_LIBTOOL_LANG_CXX_CONFIG +- else +- tagname="" +- fi +- ;; ++ AC_CACHE_CHECK([whether a program can dlopen itself], ++ lt_cv_dlopen_self, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, ++ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ++ ]) + +- F77) +- if test -n "$F77" && test "X$F77" != "Xno"; then +- AC_LIBTOOL_LANG_F77_CONFIG +- else +- tagname="" +- fi +- ;; ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ AC_CACHE_CHECK([whether a statically linked program can dlopen itself], ++ lt_cv_dlopen_self_static, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, ++ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ++ ]) ++ fi + +- GCJ) +- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then +- AC_LIBTOOL_LANG_GCJ_CONFIG +- else +- tagname="" +- fi +- ;; ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac + +- RC) +- AC_LIBTOOL_LANG_RC_CONFIG +- ;; ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac + +- *) +- AC_MSG_ERROR([Unsupported tag name: $tagname]) +- ;; +- esac ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi ++_LT_DECL([dlopen_support], [enable_dlopen], [0], ++ [Whether dlopen is supported]) ++_LT_DECL([dlopen_self], [enable_dlopen_self], [0], ++ [Whether dlopen of programs is supported]) ++_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], ++ [Whether dlopen of statically linked programs is supported]) ++])# LT_SYS_DLOPEN_SELF ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + +- # Append the new tag name to the list of available tags. +- if test -n "$tagname" ; then +- available_tags="$available_tags $tagname" +- fi +- fi +- done +- IFS="$lt_save_ifs" +- +- # Now substitute the updated list of available tags. +- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then +- mv "${ofile}T" "$ofile" +- chmod +x "$ofile" +- else +- rm -f "${ofile}T" +- AC_MSG_ERROR([unable to update list of available tagged configurations.]) +- fi +-fi +-])# _LT_AC_TAGCONFIG +- +- +-# AC_LIBTOOL_DLOPEN +-# ----------------- +-# enable checks for dlopen support +-AC_DEFUN([AC_LIBTOOL_DLOPEN], +- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +-])# AC_LIBTOOL_DLOPEN +- +- +-# AC_LIBTOOL_WIN32_DLL +-# -------------------- +-# declare package support for building win32 dll's +-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +-])# AC_LIBTOOL_WIN32_DLL +- +- +-# AC_ENABLE_SHARED([DEFAULT]) +-# --------------------------- +-# implement the --enable-shared flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_SHARED], +-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([shared], +- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], +- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_shared=yes ;; +- no) enable_shared=no ;; +- *) +- enable_shared=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_shared=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +-])# AC_ENABLE_SHARED +- +- +-# AC_DISABLE_SHARED +-# ----------------- +-#- set the default shared flag to --disable-shared +-AC_DEFUN([AC_DISABLE_SHARED], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_SHARED(no) +-])# AC_DISABLE_SHARED -- cygwin*) -- lt_cv_dlopen="dlopen" -- lt_cv_dlopen_libs= -- ;; +- +-# AC_ENABLE_STATIC([DEFAULT]) ++# _LT_COMPILER_C_O([TAGNAME]) + # --------------------------- +-# implement the --enable-static flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_STATIC], +-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([static], +- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], +- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_static=yes ;; +- no) enable_static=no ;; +- *) +- enable_static=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_static=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_static=]AC_ENABLE_STATIC_DEFAULT) +-])# AC_ENABLE_STATIC +- +- +-# AC_DISABLE_STATIC +-# ----------------- +-# set the default static flag to --disable-static +-AC_DEFUN([AC_DISABLE_STATIC], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_STATIC(no) +-])# AC_DISABLE_STATIC ++# Check to see if options -c and -o are simultaneously supported by compiler. ++# This macro does not hard code the compiler like AC_PROG_CC_C_O. ++m4_defun([_LT_COMPILER_C_O], ++[m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_TAG_COMPILER])dnl ++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], ++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], ++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext -- darwin*) -- # if libdl is installed we need to link against it -- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 --echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 --if test "${ac_cv_lib_dl_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldl $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ fi ++ fi ++ chmod u+w . 2>&AS_MESSAGE_LOG_FD ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* ++]) ++_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], ++ [Does compiler simultaneously support -c and -o options?]) ++])# _LT_COMPILER_C_O --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); --int --main () --{ --dlopen (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dl_dlopen=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +-# AC_ENABLE_FAST_INSTALL([DEFAULT]) +-# --------------------------------- +-# implement the --enable-fast-install flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_FAST_INSTALL], +-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([fast-install], +- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], +- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_fast_install=yes ;; +- no) enable_fast_install=no ;; +- *) +- enable_fast_install=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_fast_install=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +-])# AC_ENABLE_FAST_INSTALL --ac_cv_lib_dl_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 --if test $ac_cv_lib_dl_dlopen = yes; then -- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" --else ++# _LT_COMPILER_FILE_LOCKS([TAGNAME]) ++# ---------------------------------- ++# Check to see if we can do hard links to lock some files if needed ++m4_defun([_LT_COMPILER_FILE_LOCKS], ++[m4_require([_LT_ENABLE_LOCK])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++_LT_COMPILER_C_O([$1]) -- lt_cv_dlopen="dyld" -- lt_cv_dlopen_libs= -- lt_cv_dlopen_self=yes +-# AC_DISABLE_FAST_INSTALL +-# ----------------------- +-# set the default to --disable-fast-install +-AC_DEFUN([AC_DISABLE_FAST_INSTALL], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_FAST_INSTALL(no) +-])# AC_DISABLE_FAST_INSTALL ++hard_links="nottested" ++if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ AC_MSG_CHECKING([if we can lock with hard links]) ++ hard_links=yes ++ $RM conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ AC_MSG_RESULT([$hard_links]) ++ if test "$hard_links" = no; then ++ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ++])# _LT_COMPILER_FILE_LOCKS -+if test -n "${ZSH_VERSION+set}" ; then -+ setopt NO_GLOB_SUBST - fi -- ;; -- -- *) -- echo "$as_me:$LINENO: checking for shl_load" >&5 --echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 --if test "${ac_cv_func_shl_load+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -+$as_echo_n "checking for objdir... " >&6; } -+if test "${lt_cv_objdir+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --/* Define shl_load to an innocuous variant, in case declares shl_load. -- For example, HP-UX 11i declares gettimeofday. */ --#define shl_load innocuous_shl_load -+ rm -f .libs 2>/dev/null +-# AC_LIBTOOL_PICMODE([MODE]) +-# -------------------------- +-# implement the --with-pic flag +-# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +-AC_DEFUN([AC_LIBTOOL_PICMODE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-pic_mode=ifelse($#,1,$1,default) +-])# AC_LIBTOOL_PICMODE ++# _LT_CHECK_OBJDIR ++# ---------------- ++m4_defun([_LT_CHECK_OBJDIR], ++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], ++[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs @@ -44493,900 +5947,1237 @@ + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi -+rmdir .libs 2>/dev/null -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -+$as_echo "$lt_cv_objdir" >&6; } ++rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir ++_LT_DECL([], [objdir], [0], ++ [The name of the directory that contains temporary libtool files])dnl ++m4_pattern_allow([LT_OBJDIR])dnl ++AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", ++ [Define to the sub-directory in which libtool stores uninstalled libraries.]) ++])# _LT_CHECK_OBJDIR --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char shl_load (); below. -- Prefer to if __STDC__ is defined, since -- exists even on freestanding compilers. */ - --#ifdef __STDC__ --# include --#else --# include --#endif - --#undef shl_load - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --{ --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char shl_load (); --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub_shl_load) || defined (__stub___shl_load) --choke me --#else --char (*f) () = shl_load; --#endif --#ifdef __cplusplus --} --#endif - --int --main () --{ --return f != shl_load; -- ; -- return 0; --} -+cat >>confdefs.h <<_ACEOF -+#define LT_OBJDIR "$lt_cv_objdir/" - _ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_func_shl_load=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_func_shl_load=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 --echo "${ECHO_T}$ac_cv_func_shl_load" >&6 --if test $ac_cv_func_shl_load = yes; then -- lt_cv_dlopen="shl_load" --else -- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 --echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 --if test "${ac_cv_lib_dld_shl_load+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldld $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char shl_load (); --int --main () --{ --shl_load (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dld_shl_load=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_dld_shl_load=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 --echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 --if test $ac_cv_lib_dld_shl_load = yes; then -- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" --else -- echo "$as_me:$LINENO: checking for dlopen" >&5 --echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 --if test "${ac_cv_func_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --/* Define dlopen to an innocuous variant, in case declares dlopen. -- For example, HP-UX 11i declares gettimeofday. */ --#define dlopen innocuous_dlopen - --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char dlopen (); below. -- Prefer to if __STDC__ is defined, since -- exists even on freestanding compilers. */ --#ifdef __STDC__ --# include --#else --# include --#endif +-# AC_PROG_EGREP +-# ------------- +-# This is predefined starting with Autoconf 2.54, so this conditional +-# definition can be removed once we require Autoconf 2.54 or later. +-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], +- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' +- fi]) +- EGREP=$ac_cv_prog_egrep +- AC_SUBST([EGREP]) +-])]) ++# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) ++# -------------------------------------- ++# Check hardcoding attributes. ++m4_defun([_LT_LINKER_HARDCODE_LIBPATH], ++[AC_MSG_CHECKING([how to hardcode library paths into programs]) ++_LT_TAGVAR(hardcode_action, $1)= ++if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || ++ test -n "$_LT_TAGVAR(runpath_var, $1)" || ++ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then --#undef dlopen ++ # We can hardcode non-existent directories. ++ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && ++ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then ++ # Linking always hardcodes the temporary library directory. ++ _LT_TAGVAR(hardcode_action, $1)=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ _LT_TAGVAR(hardcode_action, $1)=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ _LT_TAGVAR(hardcode_action, $1)=unsupported ++fi ++AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --{ --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub_dlopen) || defined (__stub___dlopen) --choke me --#else --char (*f) () = dlopen; --#endif --#ifdef __cplusplus --} --#endif +-# AC_PATH_TOOL_PREFIX +-# ------------------- +-# find a file program which can recognise shared library +-AC_DEFUN([AC_PATH_TOOL_PREFIX], +-[AC_REQUIRE([AC_PROG_EGREP])dnl +-AC_MSG_CHECKING([for $1]) +-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +-[case $MAGIC_CMD in +-[[\\/*] | ?:[\\/]*]) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +-*) +- lt_save_MAGIC_CMD="$MAGIC_CMD" +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +-dnl $ac_dummy forces splitting on constant user-supplied paths. +-dnl POSIX.2 word splitting is done only on the output of word expansions, +-dnl not every word. This closes a longstanding sh security hole. +- ac_dummy="ifelse([$2], , $PATH, [$2])" +- for ac_dir in $ac_dummy; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$1; then +- lt_cv_path_MAGIC_CMD="$ac_dir/$1" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic $.*$\"`" +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- $EGREP "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 ++if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || ++ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++_LT_TAGDECL([], [hardcode_action], [0], ++ [How to hardcode a shared library path into an executable]) ++])# _LT_LINKER_HARDCODE_LIBPATH --int --main () --{ --return f != dlopen; -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_func_dlopen=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org --ac_cv_func_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 --echo "${ECHO_T}$ac_cv_func_dlopen" >&6 --if test $ac_cv_func_dlopen = yes; then -- lt_cv_dlopen="dlopen" --else -- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 --echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 --if test "${ac_cv_lib_dl_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldl $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$lt_save_ifs" +- MAGIC_CMD="$lt_save_MAGIC_CMD" +- ;; +-esac]) +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- AC_MSG_RESULT($MAGIC_CMD) ++# _LT_CMD_STRIPLIB ++# ---------------- ++m4_defun([_LT_CMD_STRIPLIB], ++[m4_require([_LT_DECL_EGREP]) ++striplib= ++old_striplib= ++AC_MSG_CHECKING([whether stripping libraries is possible]) ++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ AC_MSG_RESULT([yes]) + else +- AC_MSG_RESULT(no) ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ fi ++ ;; ++ *) ++ AC_MSG_RESULT([no]) ++ ;; ++ esac + fi +-])# AC_PATH_TOOL_PREFIX ++_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) ++_LT_DECL([], [striplib], [1]) ++])# _LT_CMD_STRIPLIB --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); --int --main () --{ --dlopen (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dl_dlopen=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 --ac_cv_lib_dl_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS +-# AC_PATH_MAGIC +-# ------------- +-# find a file program which can recognise a shared library +-AC_DEFUN([AC_PATH_MAGIC], +-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +-if test -z "$lt_cv_path_MAGIC_CMD"; then +- if test -n "$ac_tool_prefix"; then +- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) ++# _LT_SYS_DYNAMIC_LINKER([TAG]) ++# ----------------------------- ++# PORTME Fill in your ld.so characteristics ++m4_defun([_LT_SYS_DYNAMIC_LINKER], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_OBJDUMP])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_MSG_CHECKING([dynamic linker characteristics]) ++m4_if([$1], ++ [], [ ++if test "$GCC" = yes; then ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else +- MAGIC_CMD=: ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi -fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 --if test $ac_cv_lib_dl_dlopen = yes; then -- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" --else -- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 --echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 --if test "${ac_cv_lib_svld_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-lsvld $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); --int --main () --{ --dlopen (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_svld_dlopen=yes +-])# AC_PATH_MAGIC +- +- +-# AC_PROG_LD +-# ---------- +-# find the pathname to the GNU or non-GNU linker +-AC_DEFUN([AC_PROG_LD], +-[AC_ARG_WITH([gnu-ld], +- [AC_HELP_STRING([--with-gnu-ld], +- [assume the C compiler uses GNU ld @<:@default=no@:>@])], +- [test "$withval" = no || with_gnu_ld=yes], +- [with_gnu_ld=no]) +-AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_REQUIRE([AC_PROG_CC])dnl +-AC_REQUIRE([AC_CANONICAL_HOST])dnl +-AC_REQUIRE([AC_CANONICAL_BUILD])dnl +-ac_prog=ld +-if test "$GCC" = yes; then +- # Check if gcc -print-prog-name=ld gives a path. +- AC_MSG_CHECKING([for ld used by $CC]) +- case $host in +- *-*-mingw*) +- # gcc leaves a trailing carriage return which upsets mingw +- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; +- *) +- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; +- esac +- case $ac_prog in +- # Accept absolute paths. +- [[\\/]]* | ?:[[\\/]]*) +- re_direlt='/[[^/]][[^/]]*/\.\./' +- # Canonicalize the pathname of ld +- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` +- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` +- done +- test -z "$LD" && LD="$ac_prog" +- ;; +- "") +- # If it fails, then pretend we aren't using GCC. +- ac_prog=ld +- ;; +- *) +- # If it is relative, then search for the first ld in PATH. +- with_gnu_ld=unknown +- ;; +- esac +-elif test "$with_gnu_ld" = yes; then +- AC_MSG_CHECKING([for GNU ld]) -else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_svld_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS +- AC_MSG_CHECKING([for non-GNU ld]) -fi --echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 --if test $ac_cv_lib_svld_dlopen = yes; then -- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" --else -- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 --echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 --if test "${ac_cv_lib_dld_dld_link+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldld $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dld_link (); --int --main () --{ --dld_link (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dld_dld_link=yes +-AC_CACHE_VAL(lt_cv_path_LD, +-[if test -z "$LD"; then +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then +- lt_cv_path_LD="$ac_dir/$ac_prog" +- # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some GNU ld's only accept -v. +- # Break only if it was the GNU/non-GNU ld that we prefer. +- case `"$lt_cv_path_LD" -v 2>&1 /dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done +- IFS="$lt_save_ifs" ++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[[lt_foo]]++; } ++ if (lt_freq[[lt_foo]] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` + else +- lt_cv_path_LD="$LD" # Let the user override the test with a path. ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + fi]) +-LD="$lt_cv_path_LD" +-if test -n "$LD"; then +- AC_MSG_RESULT($LD) -else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_dld_dld_link=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 --echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 --if test $ac_cv_lib_dld_dld_link = yes; then -- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +- AC_MSG_RESULT(no) -fi +-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +-AC_PROG_LD_GNU +-])# AC_PROG_LD +- +- +-# AC_PROG_LD_GNU +-# -------------- +-AC_DEFUN([AC_PROG_LD_GNU], +-[AC_REQUIRE([AC_PROG_EGREP])dnl +-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, +-[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +-case `$LD -v 2>&1 /dev/null; then +- case $host_cpu in +- i*86 ) +- # Not sure whether the presence of OpenBSD here was a mistake. +- # Let's accept both of them until this is cleared up. +- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++aix[[4-9]]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[[01]] | aix4.[[01]].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi + ;; + esac +- else +- lt_cv_deplibs_check_method=pass_all ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH + fi + ;; -+# Sed substitution to delay expansion of an escaped shell variable in a -+# double_quote_subst'ed string. -+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' +-gnu*) +- lt_cv_deplibs_check_method=pass_all +- ;; +- +-hpux10.20* | hpux11*) +- lt_cv_file_magic_cmd=/usr/bin/file +- case "$host_cpu" in +- ia64*) +- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' +- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so +- ;; +- hppa*64*) +- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] +- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ++amigaos*) ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; +- *) +- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' +- lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/$[[^/]]*$\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; --fi -+# Sed substitution to delay expansion of an escaped single quote. -+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' +-irix5* | irix6* | nonstopux*) +- case $LD in +- *-32|*"-32 ") libmagic=32-bit;; +- *-n32|*"-n32 ") libmagic=N32;; +- *-64|*"-64 ") libmagic=64-bit;; +- *) libmagic=never-match;; +- esac +- lt_cv_deplibs_check_method=pass_all +- ;; +- +-# This must be Linux ELF. +-linux*) +- case $host_cpu in +- alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*|x86_64*) +- lt_cv_deplibs_check_method=pass_all ;; +- *) +- # glibc up to 2.1.1 does not perform some relocations on ARM +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; +- esac +- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` +- lt_cv_deplibs_check_method=pass_all ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH + ;; -+# Sed substitution to avoid accidental globbing in evaled expressions -+no_glob_subst='s/\*/\\\*/g' +-netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' +- else +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' +- fi ++bsdi[[45]]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs + ;; --fi -+# Global variables: -+ofile=libtool -+can_build_shared=yes +-newos6*) +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=/usr/lib/libnls.so +- ;; ++cygwin* | mingw* | pw32* | cegcc*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no -+# All known linkers require a `.a' archive for static linking (except MSVC, -+# which needs '.lib'). -+libext=a +-nto-qnx*) +- lt_cv_deplibs_check_method=unknown +- ;; ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes --fi -+with_gnu_ld="$lt_cv_prog_gnu_ld" +-openbsd*) +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' +- else +- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' +- fi ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw* | cegcc*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH + ;; + +-osf3* | osf4* | osf5*) +- lt_cv_deplibs_check_method=pass_all ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++m4_if([$1], [],[ ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +-sco3.2v5*) +- lt_cv_deplibs_check_method=pass_all ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH + ;; + +-solaris*) +- lt_cv_deplibs_check_method=pass_all ++freebsd1*) ++ dynamic_linker=no + ;; +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- case $host_vendor in +- motorola) +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; -- esac -+old_CC="$CC" -+old_CFLAGS="$CFLAGS" +- ncr) +- lt_cv_deplibs_check_method=pass_all ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[[123]]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes + ;; +- sequent) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ++ freebsd3.[[01]]* | freebsdelf3.[[01]]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes + ;; +- sni) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" +- lt_cv_file_magic_test_file=/lib/libc.so ++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ ++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes + ;; +- siemens) +- lt_cv_deplibs_check_method=pass_all ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes + ;; + esac + ;; -- if test "x$lt_cv_dlopen" != xno; then -- enable_dlopen=yes -- else -- enable_dlopen=no -- fi -+# Set sane defaults for various variables -+test -z "$CC" && CC=cc -+test -z "$LTCC" && LTCC=$CC -+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -+test -z "$LD" && LD=ld -+test -z "$ac_objext" && ac_objext=o +-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) +- lt_cv_deplibs_check_method=pass_all ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes + ;; +-esac +-]) +-file_magic_cmd=$lt_cv_file_magic_cmd +-deplibs_check_method=$lt_cv_deplibs_check_method +-test -z "$deplibs_check_method" && deplibs_check_method=unknown +-])# AC_DEPLIBS_CHECK_METHOD +- -- case $lt_cv_dlopen in -- dlopen) -- save_CPPFLAGS="$CPPFLAGS" -- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +-# AC_PROG_NM +-# ---------- +-# find the pathname to a BSD-compatible name lister +-AC_DEFUN([AC_PROG_NM], +-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +-[if test -n "$NM"; then +- # Let the user override the test. +- lt_cv_path_NM="$NM" +-else +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- tmp_nm="$ac_dir/${ac_tool_prefix}nm" +- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then +- # Check to see if the nm accepts a BSD-compat flag. +- # Adding the `sed 1q' prevents false positives on HP-UX, which says: +- # nm: unknown option "B" ignored +- # Tru64's nm complains that /dev/null is an invalid object file +- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in +- */dev/null* | *'Invalid file or object type'*) +- lt_cv_path_NM="$tmp_nm -B" +- break +- ;; +- *) +- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in +- */dev/null*) +- lt_cv_path_NM="$tmp_nm -p" +- break +- ;; +- *) +- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but +- continue # so that we can try to find one that supports BSD flags +- ;; +- esac +- esac ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi +- done +- IFS="$lt_save_ifs" +- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +-fi]) +-NM="$lt_cv_path_NM" +-])# AC_PROG_NM - -- save_LDFLAGS="$LDFLAGS" -- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" -+for cc_temp in $compiler""; do -+ case $cc_temp in -+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; -+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; -+ \-*) ;; -+ *) break;; ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; + esac -+done -+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - -- save_LIBS="$LIBS" -- LIBS="$lt_cv_dlopen_libs $LIBS" - -- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 --echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 --if test "${lt_cv_dlopen_self+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+# Only perform the check for file, if the check method requires it -+test -z "$MAGIC_CMD" && MAGIC_CMD=file -+case $deplibs_check_method in -+file_magic*) -+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- if test "$cross_compiling" = yes; then : -- lt_cv_dlopen_self=cross -+ case $MAGIC_CMD in -+[\\/*] | ?:[\\/]*) -+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' + ;; -+*) -+ lt_save_MAGIC_CMD="$MAGIC_CMD" -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" -+ for ac_dir in $ac_dummy; do -+ IFS="$lt_save_ifs" -+ test -z "$ac_dir" && ac_dir=. -+ if test -f $ac_dir/${ac_tool_prefix}file; then -+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" -+ if test -n "$file_magic_test_file"; then -+ case $deplibs_check_method in -+ "file_magic "*) -+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"` -+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | -+ $EGREP "$file_magic_regex" > /dev/null; then -+ : -+ else -+ cat <<_LT_EOF 1>&2 -+ -+*** Warning: the command libtool uses to detect shared libraries, -+*** $file_magic_cmd, produces output that libtool cannot recognize. -+*** The result is that libtool may fail to recognize shared libraries -+*** as such. This will affect the creation of libtool libraries that -+*** depend on shared libraries, but programs linked with such libtool -+*** libraries will work regardless of this problem. Nevertheless, you -+*** may want to report the problem to your system manager and/or to -+*** bug-libtool@gnu.org + +-# AC_CHECK_LIBM +-# ------------- +-# check for math library +-AC_DEFUN([AC_CHECK_LIBM], +-[AC_REQUIRE([AC_CANONICAL_HOST])dnl +-LIBM= +-case $host in +-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) +- # These system don't have libm, or don't need it ++interix[[3-9]]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes + ;; +-*-ncr-sysv4.3*) +- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") +- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + -+_LT_EOF -+ fi ;; -+ esac -+ fi -+ break -+ fi -+ done -+ IFS="$lt_save_ifs" -+ MAGIC_CMD="$lt_save_MAGIC_CMD" -+ ;; -+esac -+fi ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes + ;; +-*) +- AC_CHECK_LIB(m, cos, LIBM="-lm") + -+MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -+if test -n "$MAGIC_CMD"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -+$as_echo "$MAGIC_CMD" >&6; } - else -- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 -- lt_status=$lt_dlunknown -- cat > conftest.$ac_ext <&5 -+$as_echo "no" >&6; } -+fi - --#if HAVE_DLFCN_H --#include --#endif - --#include - --#ifdef RTLD_GLOBAL --# define LT_DLGLOBAL RTLD_GLOBAL --#else --# ifdef DL_GLOBAL --# define LT_DLGLOBAL DL_GLOBAL --# else --# define LT_DLGLOBAL 0 --# endif --#endif - --/* We may have to define LT_DLLAZY_OR_NOW in the command line if we -- find out it does not work in some platform. */ --#ifndef LT_DLLAZY_OR_NOW --# ifdef RTLD_LAZY --# define LT_DLLAZY_OR_NOW RTLD_LAZY --# else --# ifdef DL_LAZY --# define LT_DLLAZY_OR_NOW DL_LAZY --# else --# ifdef RTLD_NOW --# define LT_DLLAZY_OR_NOW RTLD_NOW --# else --# ifdef DL_NOW --# define LT_DLLAZY_OR_NOW DL_NOW --# else --# define LT_DLLAZY_OR_NOW 0 --# endif --# endif --# endif --# endif --#endif ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no + ;; +-esac +-])# AC_CHECK_LIBM --#ifdef __cplusplus --extern "C" void exit (int); --#endif -+if test -z "$lt_cv_path_MAGIC_CMD"; then -+ if test -n "$ac_tool_prefix"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -+$as_echo_n "checking for file... " >&6; } -+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ case $MAGIC_CMD in -+[\\/*] | ?:[\\/]*) -+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. -+ ;; -+*) -+ lt_save_MAGIC_CMD="$MAGIC_CMD" -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" -+ for ac_dir in $ac_dummy; do -+ IFS="$lt_save_ifs" -+ test -z "$ac_dir" && ac_dir=. -+ if test -f $ac_dir/file; then -+ lt_cv_path_MAGIC_CMD="$ac_dir/file" -+ if test -n "$file_magic_test_file"; then -+ case $deplibs_check_method in -+ "file_magic "*) -+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"` -+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | -+ $EGREP "$file_magic_regex" > /dev/null; then -+ : -+ else -+ cat <<_LT_EOF 1>&2 ++# This must be Linux ELF. ++linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ ++ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], ++ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], ++ [shlibpath_overrides_runpath=yes])]) ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir --void fnord() { int i=42;} --int main () --{ -- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -- int status = $lt_dlunknown; -+*** Warning: the command libtool uses to detect shared libraries, -+*** $file_magic_cmd, produces output that libtool cannot recognize. -+*** The result is that libtool may fail to recognize shared libraries -+*** as such. This will affect the creation of libtool libraries that -+*** depend on shared libraries, but programs linked with such libtool -+*** libraries will work regardless of this problem. Nevertheless, you -+*** may want to report the problem to your system manager and/or to -+*** bug-libtool@gnu.org +-# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +-# ----------------------------------- +-# sets LIBLTDL to the link flags for the libltdl convenience library and +-# LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL +-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +-# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will +-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with +-# '${top_srcdir}/' (note the single quotes!). If your package is not +-# flat and you're not using automake, define top_builddir and +-# top_srcdir appropriately in the Makefiles. +-AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +- case $enable_ltdl_convenience in +- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; +- "") enable_ltdl_convenience=yes +- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; +- esac +- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la +- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +- # For backwards non-gettext consistent compatibility... +- INCLTDL="$LTDLINCL" +-])# AC_LIBLTDL_CONVENIENCE +- ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes -- if (self) -- { -- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -- /* dlclose (self); */ -- } -+_LT_EOF -+ fi ;; -+ esac -+ fi -+ break -+ fi -+ done -+ IFS="$lt_save_ifs" -+ MAGIC_CMD="$lt_save_MAGIC_CMD" -+ ;; -+esac -+fi +-# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +-# ----------------------------------- +-# sets LIBLTDL to the link flags for the libltdl installable library and +-# LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-install to the configure arguments. Note that LIBLTDL +-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +-# DIRECTORY is not provided and an installed libltdl is not found, it is +-# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' +-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single +-# quotes!). If your package is not flat and you're not using automake, +-# define top_builddir and top_srcdir appropriately in the Makefiles. +-# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +-AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +- AC_CHECK_LIB(ltdl, lt_dlinit, +- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], +- [if test x"$enable_ltdl_install" = xno; then +- AC_MSG_WARN([libltdl not installed, but installation disabled]) +- else +- enable_ltdl_install=yes +- fi +- ]) +- if test x"$enable_ltdl_install" = x"yes"; then +- ac_configure_args="$ac_configure_args --enable-ltdl-install" +- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la +- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +- else +- ac_configure_args="$ac_configure_args --enable-ltdl-install=no" +- LIBLTDL="-lltdl" +- LTDLINCL= ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi +- # For backwards non-gettext consistent compatibility... +- INCLTDL="$LTDLINCL" +-])# AC_LIBLTDL_INSTALLABLE +- +- +-# AC_LIBTOOL_CXX +-# -------------- +-# enable support for C++ libraries +-AC_DEFUN([AC_LIBTOOL_CXX], +-[AC_REQUIRE([_LT_AC_LANG_CXX]) +-])# AC_LIBTOOL_CXX +- +- +-# _LT_AC_LANG_CXX +-# --------------- +-AC_DEFUN([_LT_AC_LANG_CXX], +-[AC_REQUIRE([AC_PROG_CXX]) +-AC_REQUIRE([AC_PROG_CXXCPP]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +-])# _LT_AC_LANG_CXX +- +- +-# AC_LIBTOOL_F77 +-# -------------- +-# enable support for Fortran 77 libraries +-AC_DEFUN([AC_LIBTOOL_F77], +-[AC_REQUIRE([_LT_AC_LANG_F77]) +-])# AC_LIBTOOL_F77 +- +- +-# _LT_AC_LANG_F77 +-# --------------- +-AC_DEFUN([_LT_AC_LANG_F77], +-[AC_REQUIRE([AC_PROG_F77]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +-])# _LT_AC_LANG_F77 +- +- +-# AC_LIBTOOL_GCJ +-# -------------- +-# enable support for GCJ libraries +-AC_DEFUN([AC_LIBTOOL_GCJ], +-[AC_REQUIRE([_LT_AC_LANG_GCJ]) +-])# AC_LIBTOOL_GCJ +- +- +-# _LT_AC_LANG_GCJ +-# --------------- +-AC_DEFUN([_LT_AC_LANG_GCJ], +-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], +- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], +- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], +- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], +- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], +- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +-])# _LT_AC_LANG_GCJ +- -- exit (status); --} --EOF -- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then -- (./conftest; exit; ) 2>/dev/null -- lt_status=$? -- case x$lt_status in -- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; -- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; -- x$lt_unknown|x*) lt_cv_dlopen_self=no ;; -- esac -- else : -- # compilation failed -- lt_cv_dlopen_self=no -- fi -+MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -+if test -n "$MAGIC_CMD"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -+$as_echo "$MAGIC_CMD" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - fi --rm -fr conftest* +-# AC_LIBTOOL_RC +-# -------------- +-# enable support for Windows resource files +-AC_DEFUN([AC_LIBTOOL_RC], +-[AC_REQUIRE([LT_AC_PROG_RC]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +-])# AC_LIBTOOL_RC +- +- +-# AC_LIBTOOL_LANG_C_CONFIG +-# ------------------------ +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +-AC_DEFUN([_LT_AC_LANG_C_CONFIG], +-[lt_save_CC="$CC" +-AC_LANG_PUSH(C) +- +-# Source file extension for C test sources. +-ac_ext=c ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; +-# Object file extension for compiled C test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;\n" ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' + else -+ MAGIC_CMD=: -+ fi - fi --echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 --echo "${ECHO_T}$lt_cv_dlopen_self" >&6 - -- if test "x$lt_cv_dlopen_self" = xyes; then -- LDFLAGS="$LDFLAGS $link_static_flag" -- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 --echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 --if test "${lt_cv_dlopen_self_static+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test "$cross_compiling" = yes; then : -- lt_cv_dlopen_self_static=cross --else -- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 -- lt_status=$lt_dlunknown -- cat > conftest.$ac_ext < --#endif -+# Use C for the default configuration in the libtool script - --#include -+lt_save_CC="$CC" -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu - --#ifdef RTLD_GLOBAL --# define LT_DLGLOBAL RTLD_GLOBAL --#else --# ifdef DL_GLOBAL --# define LT_DLGLOBAL DL_GLOBAL --# else --# define LT_DLGLOBAL 0 --# endif --#endif - --/* We may have to define LT_DLLAZY_OR_NOW in the command line if we -- find out it does not work in some platform. */ --#ifndef LT_DLLAZY_OR_NOW --# ifdef RTLD_LAZY --# define LT_DLLAZY_OR_NOW RTLD_LAZY --# else --# ifdef DL_LAZY --# define LT_DLLAZY_OR_NOW DL_LAZY --# else --# ifdef RTLD_NOW --# define LT_DLLAZY_OR_NOW RTLD_NOW --# else --# ifdef DL_NOW --# define LT_DLLAZY_OR_NOW DL_NOW --# else --# define LT_DLLAZY_OR_NOW 0 --# endif --# endif --# endif --# endif --#endif -+# Source file extension for C test sources. -+ac_ext=c - --#ifdef __cplusplus --extern "C" void exit (int); --#endif -+# Object file extension for compiled C test sources. -+objext=o -+objext=$objext - --void fnord() { int i=42;} --int main () --{ -- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -- int status = $lt_dlunknown; -+# Code to be used in simple compile tests -+lt_simple_compile_test_code="int some_variable = 0;" +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(){return(0);}\n' ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; -- if (self) -- { -- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -- /* dlclose (self); */ -- } -+# Code to be used in simple link tests -+lt_simple_link_test_code='int main(){return(0);}' +-_LT_AC_SYS_COMPILER ++*nto* | *qnx*) ++ version_type=qnx ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' ++ ;; -- exit (status); --} --EOF -- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then -- (./conftest; exit; ) 2>/dev/null -- lt_status=$? -- case x$lt_status in -- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; -- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; -- x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; -- esac -- else : -- # compilation failed -- lt_cv_dlopen_self_static=no -- fi +-# +-# Check for any special shared library compilation flags. +-# +-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= +-if test "$GCC" = no; then ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in +- sco3.2v5*) +- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' +- ;; ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; + esac -fi --rm -fr conftest* - - +-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then +- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) +- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[[89]] | openbsd2.[[89]].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac + else +- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) +- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no ++ shlibpath_overrides_runpath=yes + fi -fi --echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 --echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 -- fi - -- CPPFLAGS="$save_CPPFLAGS" -- LDFLAGS="$save_LDFLAGS" -- LIBS="$save_LIBS" -- ;; -- esac ++ ;; -- case $lt_cv_dlopen_self in -- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; -- *) enable_dlopen_self=unknown ;; -- esac ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; -- case $lt_cv_dlopen_self_static in -- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; -- *) enable_dlopen_self_static=unknown ;; -- esac --fi +-# +-# Check to make sure the static flag actually works. +-# +-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], +- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), +- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), +- [], +- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; -+# If no C compiler was specified, use CC. -+LTCC=${LTCC-"$CC"} ++rdos*) ++ dynamic_linker=no ++ ;; +-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF($1) +- -# Report which librarie types wil actually be built --echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 --echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 --echo "$as_me:$LINENO: result: $can_build_shared" >&5 --echo "${ECHO_T}$can_build_shared" >&6 +-AC_MSG_CHECKING([if libtool supports shared libraries]) +-AC_MSG_RESULT([$can_build_shared]) - --echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 --echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 +-AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and @@ -45398,2343 +7189,3369 @@ - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi -- ;; -+# If no C compiler flags were specified, use CFLAGS. -+LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' + ;; -aix4* | aix5*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no -- fi -- ;; ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no + fi ++ need_version=yes + ;; - darwin* | rhapsody*) - if test "$GCC" = yes; then -- archive_cmds_need_lc=no +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in -- rhapsody* | darwin1.[012]) -- allow_undefined_flag='-undefined suppress' -- ;; +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ runpath_var=LD_RUN_PATH + ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then -- allow_undefined_flag='-flat_namespace -undefined suppress' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in -- 10.[012]) -- allow_undefined_flag='-flat_namespace -undefined suppress' +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - ;; - 10.*) -- allow_undefined_flag='-undefined dynamic_lookup' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' - ;; - esac - fi -- ;; ++ siemens) ++ need_lib_prefix=no + ;; - esac - output_verbose_link_cmd='echo' -- archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' -- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' +- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's -- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- hardcode_direct=no -- hardcode_automatic=yes -- hardcode_shlibpath_var=unsupported -- whole_archive_flag_spec='-all_load $convenience' -- link_all_deplibs=yes +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else -- ld_shlibs=no +- _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; -esac --echo "$as_me:$LINENO: result: $enable_shared" >&5 --echo "${ECHO_T}$enable_shared" >&6 -+# Allow CC to be a program name with arguments. -+compiler=$CC +-AC_MSG_RESULT([$enable_shared]) ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; --echo "$as_me:$LINENO: checking whether to build static libraries" >&5 --echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 +-AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes --echo "$as_me:$LINENO: result: $enable_static" >&5 --echo "${ECHO_T}$enable_static" >&6 -- --# The else clause should only fire when bootstrapping the --# libtool distribution, otherwise you forgot to ship ltmain.sh --# with your package, and you will get complaints that there are --# no rules to generate ltmain.sh. --if test -f "$ltmain"; then -- # See if we are running on zsh, and set the options which allow our commands through -- # without removal of \ escapes. -- if test -n "${ZSH_VERSION+set}" ; then -- setopt NO_GLOB_SUBST -- fi -- # Now quote all the things that may contain metacharacters while being -- # careful not to overquote the AC_SUBSTed values. We take copies of the -- # variables and quote the copies for generation of the libtool script. -- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ -- SED SHELL STRIP \ -- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ -- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ -- deplibs_check_method reload_flag reload_cmds need_locks \ -- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ -- lt_cv_sys_global_symbol_to_c_name_address \ -- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ -- old_postinstall_cmds old_postuninstall_cmds \ -- compiler \ -- CC \ -- LD \ -- lt_prog_compiler_wl \ -- lt_prog_compiler_pic \ -- lt_prog_compiler_static \ -- lt_prog_compiler_no_builtin_flag \ -- export_dynamic_flag_spec \ -- thread_safe_flag_spec \ -- whole_archive_flag_spec \ -- enable_shared_with_static_runtimes \ -- old_archive_cmds \ -- old_archive_from_new_cmds \ -- predep_objects \ -- postdep_objects \ -- predeps \ -- postdeps \ -- compiler_lib_search_path \ -- archive_cmds \ -- archive_expsym_cmds \ -- postinstall_cmds \ -- postuninstall_cmds \ -- old_archive_from_expsyms_cmds \ -- allow_undefined_flag \ -- no_undefined_flag \ -- export_symbols_cmds \ -- hardcode_libdir_flag_spec \ -- hardcode_libdir_flag_spec_ld \ -- hardcode_libdir_separator \ -- hardcode_automatic \ -- module_cmds \ -- module_expsym_cmds \ -- lt_cv_prog_compiler_c_o \ -- exclude_expsyms \ -- include_expsyms; do -- -- case $var in -- old_archive_cmds | \ -- old_archive_from_new_cmds | \ -- archive_cmds | \ -- archive_expsym_cmds | \ -- module_cmds | \ -- module_expsym_cmds | \ -- old_archive_from_expsyms_cmds | \ -- export_symbols_cmds | \ -- extract_expsyms_cmds | reload_cmds | finish_cmds | \ -- postinstall_cmds | postuninstall_cmds | \ -- old_postinstall_cmds | old_postuninstall_cmds | \ -- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) -- # Double-quote double-evaled strings. -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" -- ;; -- *) -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" -- ;; -- esac -- done -+# Save the default compiler, since it gets overwritten when the other -+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -+compiler_DEFAULT=$CC -+ -+# save warnings/boilerplate of simple test code -+ac_outfile=conftest.$ac_objext -+echo "$lt_simple_compile_test_code" >conftest.$ac_ext -+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -+_lt_compiler_boilerplate=`cat conftest.err` -+$RM conftest* -+ -+ac_outfile=conftest.$ac_objext -+echo "$lt_simple_link_test_code" >conftest.$ac_ext -+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -+_lt_linker_boilerplate=`cat conftest.err` -+$RM -r conftest* - -- case $lt_echo in -- *'\$0 --fallback-echo"') -- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` -- ;; -- esac +-AC_MSG_RESULT([$enable_static]) ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; --cfgfile="${ofile}T" -- trap "$rm \"$cfgfile\"; exit 1" 1 2 15 -- $rm -f "$cfgfile" -- { echo "$as_me:$LINENO: creating $ofile" >&5 --echo "$as_me: creating $ofile" >&6;} -+if test -n "$compiler"; then +-AC_LIBTOOL_CONFIG($1) ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; -- cat <<__EOF__ >> "$cfgfile" --#! $SHELL -+lt_prog_compiler_no_builtin_flag= +-AC_LANG_POP +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_C_CONFIG ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; --# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. --# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) --# NOTE: Changes made to this file will be lost: look at ltmain.sh. --# --# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 --# Free Software Foundation, Inc. --# --# This file is part of GNU Libtool: --# Originally by Gordon Matzigkeit , 1996 --# --# This program is free software; you can redistribute it and/or modify --# it under the terms of the GNU General Public License as published by --# the Free Software Foundation; either version 2 of the License, or --# (at your option) any later version. --# --# This program is distributed in the hope that it will be useful, but --# WITHOUT ANY WARRANTY; without even the implied warranty of --# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU --# General Public License for more details. --# --# You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. --# --# As a special exception to the GNU General Public License, if you --# distribute this file as part of a program that contains a --# configuration script generated by Autoconf, you may include it under --# the same distribution terms that you use for the rest of that program. -+if test "$GCC" = yes; then -+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; --# A sed program that does not truncate output. --SED=$lt_SED -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_prog_compiler_rtti_exceptions=no -+ ac_outfile=conftest.$ac_objext -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+ lt_compiler_flag="-fno-rtti -fno-exceptions" -+ # Insert the option either (1) after the last *FLAGS variable, or -+ # (2) before a word containing "conftest.", or (3) at the end. -+ # Note that $ac_compile itself does not contain backslashes and begins -+ # with a dollar sign (not a hyphen), so the echo should work correctly. -+ # The option is referenced via a variable to avoid confusing sed. -+ lt_compile=`echo "$ac_compile" | $SED \ -+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -+ -e 's:$: $lt_compiler_flag:'` -+ (eval echo "\"\$as_me:8393: $lt_compile\"" >&5) -+ (eval "$lt_compile" 2>conftest.err) -+ ac_status=$? -+ cat conftest.err >&5 -+ echo "$as_me:8397: \$? = $ac_status" >&5 -+ if (exit $ac_status) && test -s "$ac_outfile"; then -+ # The compiler can only warn and ignore the option if not recognized -+ # So say no if there are warnings other than the usual output. -+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp -+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 -+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then -+ lt_cv_prog_compiler_rtti_exceptions=yes -+ fi -+ fi -+ $RM conftest* +-# AC_LIBTOOL_LANG_CXX_CONFIG +-# -------------------------- +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +-[AC_LANG_PUSH(C++) +-AC_REQUIRE([AC_PROG_CXX]) +-AC_REQUIRE([AC_PROG_CXXCPP]) +- +-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +-_LT_AC_TAGVAR(allow_undefined_flag, $1)= +-_LT_AC_TAGVAR(always_export_symbols, $1)=no +-_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_direct, $1)=no +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +-_LT_AC_TAGVAR(hardcode_automatic, $1)=no +-_LT_AC_TAGVAR(module_cmds, $1)= +-_LT_AC_TAGVAR(module_expsym_cmds, $1)= +-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +-_LT_AC_TAGVAR(no_undefined_flag, $1)= +-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++*) ++ dynamic_linker=no ++ ;; ++esac ++AC_MSG_RESULT([$dynamic_linker]) ++test "$dynamic_linker" = no && can_build_shared=no --# Sed that helps us avoid accidentally triggering echo(1) options like -n. --Xsed="$SED -e s/^X//" +-# Dependencies to place before and after the object being linked: +-_LT_AC_TAGVAR(predep_objects, $1)= +-_LT_AC_TAGVAR(postdep_objects, $1)= +-_LT_AC_TAGVAR(predeps, $1)= +-_LT_AC_TAGVAR(postdeps, $1)= +-_LT_AC_TAGVAR(compiler_lib_search_path, $1)= ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } --# The HP-UX ksh and POSIX shell print the target directory to stdout --# if CDPATH is set. --if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi -+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then -+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -+else -+ : +-# Source file extension for C++ test sources. +-ac_ext=cc ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi - --# The names of the tagged configurations supported by this script. --available_tags= ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi --# ### BEGIN LIBTOOL CONFIG - --# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - --# Shell to use when invoking shell scripts. --SHELL=$lt_SHELL - --# Whether or not to build shared libraries. --build_libtool_libs=$enable_shared - --# Whether or not to build static libraries. --build_old_libs=$enable_static +-# Object file extension for compiled C++ test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext ++_LT_DECL([], [variables_saved_for_relink], [1], ++ [Variables whose values should be saved in libtool wrapper scripts and ++ restored at link time]) ++_LT_DECL([], [need_lib_prefix], [0], ++ [Do we need the "lib" prefix for modules?]) ++_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) ++_LT_DECL([], [version_type], [0], [Library versioning type]) ++_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) ++_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) ++_LT_DECL([], [shlibpath_overrides_runpath], [0], ++ [Is shlibpath searched before the hard-coded library search path?]) ++_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) ++_LT_DECL([], [library_names_spec], [1], ++ [[List of archive names. First name is the real one, the rest are links. ++ The last name is the one that the linker finds with -lNAME]]) ++_LT_DECL([], [soname_spec], [1], ++ [[The coded name of the library, if different from the real name]]) ++_LT_DECL([], [postinstall_cmds], [2], ++ [Command to use after installation of a shared archive]) ++_LT_DECL([], [postuninstall_cmds], [2], ++ [Command to use after uninstallation of a shared archive]) ++_LT_DECL([], [finish_cmds], [2], ++ [Commands used to finish a libtool library installation in a directory]) ++_LT_DECL([], [finish_eval], [1], ++ [[As "finish_cmds", except a single script fragment to be evaled but ++ not shown]]) ++_LT_DECL([], [hardcode_into_libs], [0], ++ [Whether we should hardcode library paths into libraries]) ++_LT_DECL([], [sys_lib_search_path_spec], [2], ++ [Compile-time system search path for libraries]) ++_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], ++ [Run-time system search path for libraries]) ++])# _LT_SYS_DYNAMIC_LINKER --# Whether or not to add -lc for building shared libraries. --build_libtool_need_lc=$archive_cmds_need_lc -+ lt_prog_compiler_wl= -+lt_prog_compiler_pic= -+lt_prog_compiler_static= +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;\n" --# Whether or not to disallow shared libs when runtime libs are static --allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -+$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' ++# _LT_PATH_TOOL_PREFIX(TOOL) ++# -------------------------- ++# find a file program which can recognize shared library ++AC_DEFUN([_LT_PATH_TOOL_PREFIX], ++[m4_require([_LT_DECL_EGREP])dnl ++AC_MSG_CHECKING([for $1]) ++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, ++[case $MAGIC_CMD in ++[[\\/*] | ?:[\\/]*]) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++dnl $ac_dummy forces splitting on constant user-supplied paths. ++dnl POSIX.2 word splitting is done only on the output of word expansions, ++dnl not every word. This closes a longstanding sh security hole. ++ ac_dummy="m4_if([$2], , $PATH, [$2])" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$1; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/$1" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 --# Whether or not to optimize for fast installation. --fast_install=$enable_fast_install -+ if test "$GCC" = yes; then -+ lt_prog_compiler_wl='-Wl,' -+ lt_prog_compiler_static='-static' +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org --# The host system. --host_alias=$host_alias --host=$host -+ case $host_os in -+ aix*) -+ # All AIX code is PIC. -+ if test "$host_cpu" = ia64; then -+ # AIX 5 now supports IA64 processor -+ lt_prog_compiler_static='-Bstatic' +-# Allow CC to be a program name with arguments. +-lt_save_CC=$CC +-lt_save_LD=$LD +-lt_save_GCC=$GCC +-GCC=$GXX +-lt_save_with_gnu_ld=$with_gnu_ld +-lt_save_path_LD=$lt_cv_path_LD +-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then +- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +-else +- unset lt_cv_prog_gnu_ld +-fi +-if test -n "${lt_cv_path_LDCXX+set}"; then +- lt_cv_path_LD=$lt_cv_path_LDCXX ++_LT_EOF ++ fi ;; ++ esac + fi -+ ;; - --# An echo program that does not interpret backslashes. --echo=$lt_echo -+ amigaos*) -+ case $host_cpu in -+ powerpc) -+ # see comment about AmigaOS4 .so support -+ lt_prog_compiler_pic='-fPIC' -+ ;; -+ m68k) -+ # FIXME: we need at least 68020 code to build shared libraries, but -+ # adding the `-m68020' flag to GCC prevents building anything better, -+ # like `-m68040'. -+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' -+ ;; -+ esac -+ ;; - --# The archiver. --AR=$lt_AR --AR_FLAGS=$lt_AR_FLAGS -+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) -+ # PIC is the default for these OSes. -+ ;; - --# A C compiler. --LTCC=$lt_LTCC -+ mingw* | cygwin* | pw32* | os2* | cegcc*) -+ # This hack is so that the source file can tell whether it is being -+ # built for inclusion in a dll (and should export symbols for example). -+ # Although the cygwin gcc ignores -fPIC, still need this for old-style -+ # (--disable-auto-import) libraries -+ lt_prog_compiler_pic='-DDLL_EXPORT' -+ ;; - --# A language-specific compiler. --CC=$lt_compiler -+ darwin* | rhapsody*) -+ # PIC is the default on this platform -+ # Common symbols not allowed in MH_DYLIB files -+ lt_prog_compiler_pic='-fno-common' -+ ;; ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac]) ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ AC_MSG_RESULT($MAGIC_CMD) + else +- unset lt_cv_path_LD ++ AC_MSG_RESULT(no) + fi +-test -z "${LDCXX+set}" || LD=$LDCXX +-CC=${CXX-"c++"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC +-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` ++_LT_DECL([], [MAGIC_CMD], [0], ++ [Used to examine libraries when file_magic_cmd begins with "file"])dnl ++])# _LT_PATH_TOOL_PREFIX --# Is the compiler the GNU C compiler? --with_gcc=$GCC -+ hpux*) -+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit -+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag -+ # sets the default TLS model and affects inlining. -+ case $host_cpu in -+ hppa*64*) -+ # +Z the default -+ ;; -+ *) -+ lt_prog_compiler_pic='-fPIC' -+ ;; -+ esac -+ ;; +-# We don't want -fno-exception wen compiling C++ code, so set the +-# no_builtin_flag separately +-if test "$GXX" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +-else +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +-fi ++# Old name: ++AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) --# An ERE matcher. --EGREP=$lt_EGREP -+ interix[3-9]*) -+ # Interix 3.x gcc -fpic/-fPIC options generate broken code. -+ # Instead, we relocate shared libraries at runtime. -+ ;; +-if test "$GXX" = yes; then +- # Set up default GNU C++ configuration --# The linker used to build libraries. --LD=$lt_LD -+ msdosdjgpp*) -+ # Just because we use GCC doesn't mean we suddenly get shared libraries -+ # on systems that don't support them. -+ lt_prog_compiler_can_build_shared=no -+ enable_shared=no -+ ;; +- AC_PROG_LD ++# _LT_PATH_MAGIC ++# -------------- ++# find a file program which can recognize a shared library ++m4_defun([_LT_PATH_MAGIC], ++[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) ++ else ++ MAGIC_CMD=: ++ fi ++fi ++])# _LT_PATH_MAGIC --# Whether we need hard or soft links. --LN_S=$lt_LN_S -+ *nto* | *qnx*) -+ # QNX uses GNU C++, but need to define -shared option too, otherwise -+ # it will coredump. -+ lt_prog_compiler_pic='-fPIC -shared' -+ ;; +- # Check if GNU C++ uses GNU ld as the underlying linker, since the +- # archiving commands below assume that GNU ld is being used. +- if test "$with_gnu_ld" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' --# A BSD-compatible nm program. --NM=$lt_NM -+ sysv4*MP*) -+ if test -d /usr/nec; then -+ lt_prog_compiler_pic=-Kconform_pic -+ fi -+ ;; +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++# LT_PATH_LD ++# ---------- ++# find the pathname to the GNU or non-GNU linker ++AC_DEFUN([LT_PATH_LD], ++[AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl --# A symbol stripping program --STRIP=$lt_STRIP -+ *) -+ lt_prog_compiler_pic='-fPIC' -+ ;; -+ esac -+ else -+ # PORTME Check for flag to pass linker flags through the system compiler. -+ case $host_os in -+ aix*) -+ lt_prog_compiler_wl='-Wl,' -+ if test "$host_cpu" = ia64; then -+ # AIX 5 now supports IA64 processor -+ lt_prog_compiler_static='-Bstatic' -+ else -+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' -+ fi -+ ;; +- # If archive_cmds runs LD, not CC, wlarc should be empty +- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to +- # investigate it a little bit more. (MM) +- wlarc='${wl}' ++AC_ARG_WITH([gnu-ld], ++ [AS_HELP_STRING([--with-gnu-ld], ++ [assume the C compiler uses GNU ld @<:@default=no@:>@])], ++ [test "$withval" = no || with_gnu_ld=yes], ++ [with_gnu_ld=no])dnl --# Used to examine libraries when file_magic_cmd begins "file" --MAGIC_CMD=$MAGIC_CMD -+ mingw* | cygwin* | pw32* | os2* | cegcc*) -+ # This hack is so that the source file can tell whether it is being -+ # built for inclusion in a dll (and should export symbols for example). -+ lt_prog_compiler_pic='-DDLL_EXPORT' +- # ancient GNU ld didn't support --whole-archive et. al. +- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ +- grep 'no-whole-archive' > /dev/null; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ AC_MSG_CHECKING([for ld used by $CC]) ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [[\\/]]* | ?:[[\\/]]*) ++ re_direlt='/[[^/]][[^/]]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" + ;; - --# Used on cygwin: DLL creation program. --DLLTOOL="$DLLTOOL" -+ hpux9* | hpux10* | hpux11*) -+ lt_prog_compiler_wl='-Wl,' -+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -+ # not for PA HP-UX. -+ case $host_cpu in -+ hppa*64*|ia64*) -+ # +Z the default ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ AC_MSG_CHECKING([for GNU ld]) ++else ++ AC_MSG_CHECKING([for non-GNU ld]) ++fi ++AC_CACHE_VAL(lt_cv_path_LD, ++[if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C 5.9 -+ lt_prog_compiler_pic='-KPIC' -+ lt_prog_compiler_static='-Bstatic' -+ lt_prog_compiler_wl='-Wl,' -+ ;; -+ *Sun\ F*) -+ # Sun Fortran 8.3 passes all unrecognized flags to the linker -+ lt_prog_compiler_pic='-KPIC' -+ lt_prog_compiler_static='-Bstatic' -+ lt_prog_compiler_wl='' -+ ;; -+ esac -+ ;; -+ esac -+ ;; +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi ++# Old names: ++AU_ALIAS([AM_PROG_LD], [LT_PATH_LD]) ++AU_ALIAS([AC_PROG_LD], [LT_PATH_LD]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_PROG_LD], []) ++dnl AC_DEFUN([AC_PROG_LD], []) ++ ++ ++# _LT_PATH_LD_GNU ++#- -------------- ++m4_defun([_LT_PATH_LD_GNU], ++[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, ++[# I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 /dev/null +- then +- # We have reworked collect2 +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- else +- # We have old collect2 +- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +- fi +- esac +- shared_flag='-shared' ++# _LT_CMD_RELOAD ++# -------------- ++# find reload flag for linker ++# -- PORTME Some linkers may need a different reload flag. ++m4_defun([_LT_CMD_RELOAD], ++[AC_CACHE_CHECK([for $LD option to reload object files], ++ lt_cv_ld_reload_flag, ++ [lt_cv_ld_reload_flag='-r']) ++reload_flag=$lt_cv_ld_reload_flag ++case $reload_flag in ++"" | " "*) ;; ++*) reload_flag=" $reload_flag" ;; ++esac ++reload_cmds='$LD$reload_flag -o $output$reload_objs' ++case $host_os in ++ darwin*) ++ if test "$GCC" = yes; then ++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi ++ reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi ++ ;; ++esac ++_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl ++_LT_DECL([], [reload_cmds], [2])dnl ++])# _LT_CMD_RELOAD --# How to pass a linker flag through the compiler. --wl=$lt_lt_prog_compiler_wl -+ osf3* | osf4* | osf5*) -+ lt_prog_compiler_wl='-Wl,' -+ # All OSF/1 code is PIC. -+ lt_prog_compiler_static='-non_shared' -+ ;; +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" --# Object file suffix (normally "o"). --objext="$ac_objext" -+ rdos*) -+ lt_prog_compiler_static='-non_shared' -+ ;; +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- # Exported symbols can be pulled into shared objects from archives +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; +- chorus*) +- case $cc_basename in +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; ++# _LT_CHECK_MAGIC_METHOD ++# ---------------------- ++# how to check for library dependencies ++# -- PORTME fill in with the dynamic library characteristics ++m4_defun([_LT_CHECK_MAGIC_METHOD], ++[m4_require([_LT_DECL_EGREP]) ++m4_require([_LT_DECL_OBJDUMP]) ++AC_CACHE_CHECK([how to recognize dependent libraries], ++lt_cv_deplibs_check_method, ++[lt_cv_file_magic_cmd='$MAGIC_CMD' ++lt_cv_file_magic_test_file= ++lt_cv_deplibs_check_method='unknown' ++# Need to set the preceding variable on all platforms that support ++# interlibrary dependencies. ++# 'none' -- dependencies not supported. ++# `unknown' -- same as none, but documents that we really don't know. ++# 'pass_all' -- all dependencies passed with no checks. ++# 'test_compile' -- check by making test program. ++# 'file_magic [[regex]]' -- check by looking for files in library path ++# which responds to the $file_magic_cmd with a given extended regex. ++# If you have `file' or equivalent on your system and you're not sure ++# whether `pass_all' will *always* work, you probably want this one. --# Old archive suffix (normally "a"). --libext="$libext" -+ solaris*) -+ lt_prog_compiler_pic='-KPIC' -+ lt_prog_compiler_static='-Bstatic' -+ case $cc_basename in -+ f77* | f90* | f95*) -+ lt_prog_compiler_wl='-Qoption ld ';; -+ *) -+ lt_prog_compiler_wl='-Wl,';; -+ esac -+ ;; +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, +- # as there is no search path for DLLs. +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(always_export_symbols, $1)=no +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi ++case $host_os in ++aix[[4-9]]*) ++ lt_cv_deplibs_check_method=pass_all + ;; --# Shared library suffix (normally ".so"). --shrext_cmds='$shrext_cmds' -+ sunos4*) -+ lt_prog_compiler_wl='-Qoption ld ' -+ lt_prog_compiler_pic='-PIC' -+ lt_prog_compiler_static='-Bstatic' -+ ;; +- darwin* | rhapsody*) +- if test "$GXX" = yes; then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- case "$host_os" in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++beos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; --# Executable file suffix (normally ""). --exeext="$exeext" -+ sysv4 | sysv4.2uw2* | sysv4.3*) -+ lt_prog_compiler_wl='-Wl,' -+ lt_prog_compiler_pic='-KPIC' -+ lt_prog_compiler_static='-Bstatic' -+ ;; +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++bsdi[[45]]*) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' ++ lt_cv_file_magic_cmd='/usr/bin/file -L' ++ lt_cv_file_magic_test_file=/shlib/libc.so ++ ;; --# Additional compiler flags for building library objects. --pic_flag=$lt_lt_prog_compiler_pic --pic_mode=$pic_mode -+ sysv4*MP*) -+ if test -d /usr/nec ;then -+ lt_prog_compiler_pic='-Kconform_pic' -+ lt_prog_compiler_static='-Bstatic' -+ fi -+ ;; +- dgux*) +- case $cc_basename in +- ec++) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- ghcx) +- # Green Hills C++ Compiler +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- freebsd[12]*) +- # C++ shared libraries reported to be fairly broken before switch to ELF +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- freebsd-elf*) +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- ;; +- freebsd* | kfreebsd*-gnu) +- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF +- # conventions +- _LT_AC_TAGVAR(ld_shlibs, $1)=yes +- ;; +- gnu*) +- ;; +- hpux9*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- +- case $cc_basename in +- CC) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- aCC) +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; +- hpux10*|hpux11*) +- if test $with_gnu_ld = no; then +- case "$host_cpu" in +- hppa*64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; +- ia64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- ;; +- *) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- ;; +- esac +- fi +- case "$host_cpu" in +- hppa*64*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- ia64*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- ;; +- *) +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- ;; +- esac ++cygwin*) ++ # func_win32_libid is a shell function defined in ltmain.sh ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ ;; --# What is the maximum length of a command? --max_cmd_len=$lt_cv_sys_max_cmd_len -+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) -+ lt_prog_compiler_wl='-Wl,' -+ lt_prog_compiler_pic='-KPIC' -+ lt_prog_compiler_static='-Bstatic' -+ ;; +- case $cc_basename in +- CC) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- aCC) +- case "$host_cpu" in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- esac +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes; then +- if test $with_gnu_ld = no; then +- case "$host_cpu" in +- ia64*|hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- esac +- fi +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; +- irix5* | irix6*) +- case $cc_basename in +- CC) +- # SGI C++ +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' +- +- # Archives containing C++ object files must be created using +- # "CC -ar", where "CC" is the IRIX C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' +- ;; +- *) +- if test "$GXX" = yes; then +- if test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' +- fi +- fi +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- ;; +- esac +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; +- linux*) +- case $cc_basename in +- KCC) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' +- ;; +- icpc) +- # Intel C++ +- with_gnu_ld=yes +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' +- ;; +- cxx) +- # Compaq C++ +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' ++mingw* | pw32*) ++ # Base MSYS/MinGW do not provide the 'file' command needed by ++ # func_win32_libid shell function, so use a weaker test based on 'objdump', ++ # unless we find 'file', for example because we are cross-compiling. ++ if ( file / ) >/dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ else ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ fi ++ ;; --# Does compiler simultaneously support -c and -o options? --compiler_c_o=$lt_lt_cv_prog_compiler_c_o -+ unicos*) -+ lt_prog_compiler_wl='-Wl,' -+ lt_prog_compiler_can_build_shared=no -+ ;; +- runpath_var=LD_RUN_PATH +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++cegcc) ++ # use the weaker test based on 'objdump'. See mingw*. ++ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ ;; --# Must we lock files when doing compilation ? --need_locks=$lt_need_locks -+ uts4*) -+ lt_prog_compiler_pic='-pic' -+ lt_prog_compiler_static='-Bstatic' -+ ;; +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- esac +- ;; +- lynxos*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- m88k*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- mvs*) +- case $cc_basename in +- cxx) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' +- wlarc= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- fi +- # Workaround some broken pre-1.5 toolchains +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' +- ;; +- osf3*) +- case $cc_basename in +- KCC) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' +- +- ;; +- RCC) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- cxx) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++darwin* | rhapsody*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; --# Do we need the lib prefix for modules? --need_lib_prefix=$need_lib_prefix -+ *) -+ lt_prog_compiler_can_build_shared=no +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++freebsd* | dragonfly*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ case $host_cpu in ++ i*86 ) ++ # Not sure whether the presence of OpenBSD here was a mistake. ++ # Let's accept both of them until this is cleared up. ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; -+ esac + esac +- ;; +- osf4* | osf5*) +- case $cc_basename in +- KCC) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Archives containing C++ object files must be created using +- # the KAI C++ compiler. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' +- ;; +- RCC) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- cxx) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ +- echo "-hidden">> $lib.exp~ +- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ +- $rm $lib.exp' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ else ++ lt_cv_deplibs_check_method=pass_all + fi ++ ;; --# Do we need a version for libraries? --need_version=$need_version -+case $host_os in -+ # For platforms which do not support PIC, -DPIC is meaningless: -+ *djgpp*) -+ lt_prog_compiler_pic= -+ ;; -+ *) -+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" -+ ;; -+esac -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 -+$as_echo "$lt_prog_compiler_pic" >&6; } - --# Whether dlopen is supported. --dlopen_support=$enable_dlopen - --# Whether dlopen of programs is supported. --dlopen_self=$enable_dlopen_self - --# Whether dlopen of statically linked programs is supported. --dlopen_self_static=$enable_dlopen_self_static - --# Compiler flag to prevent dynamic linking. --link_static_flag=$lt_lt_prog_compiler_static - --# Compiler flag to turn off builtin functions. --no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - --# Compiler flag to allow reflexive dlopens. --export_dynamic_flag_spec=$lt_export_dynamic_flag_spec -+# -+# Check to make sure the PIC flag actually works. -+# -+if test -n "$lt_prog_compiler_pic"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_prog_compiler_pic_works=no -+ ac_outfile=conftest.$ac_objext -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" -+ # Insert the option either (1) after the last *FLAGS variable, or -+ # (2) before a word containing "conftest.", or (3) at the end. -+ # Note that $ac_compile itself does not contain backslashes and begins -+ # with a dollar sign (not a hyphen), so the echo should work correctly. -+ # The option is referenced via a variable to avoid confusing sed. -+ lt_compile=`echo "$ac_compile" | $SED \ -+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -+ -e 's:$: $lt_compiler_flag:'` -+ (eval echo "\"\$as_me:8732: $lt_compile\"" >&5) -+ (eval "$lt_compile" 2>conftest.err) -+ ac_status=$? -+ cat conftest.err >&5 -+ echo "$as_me:8736: \$? = $ac_status" >&5 -+ if (exit $ac_status) && test -s "$ac_outfile"; then -+ # The compiler can only warn and ignore the option if not recognized -+ # So say no if there are warnings other than the usual output. -+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp -+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 -+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then -+ lt_cv_prog_compiler_pic_works=yes -+ fi -+ fi -+ $RM conftest* - --# Compiler flag to generate shared objects directly from archives. --whole_archive_flag_spec=$lt_whole_archive_flag_spec -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac ++gnu*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++hpux10.20* | hpux11*) ++ lt_cv_file_magic_cmd=/usr/bin/file ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; +- psos*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- sco*) +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- case $cc_basename in +- CC) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac ++ hppa*64*) ++ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; +- sunos4*) +- case $cc_basename in +- CC) +- # Sun C++ 4.x +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- lcc) +- # Lucid +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac ++ *) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; +- solaris*) +- case $cc_basename in +- CC) +- # Sun C++ 4.2, 5.x and Centerline C++ +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) +- # The C++ compiler is used as linker so we must use $wl +- # flag to pass the commands to the underlying system +- # linker. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- ;; +- esac +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ esac ++ ;; --# Compiler flag to generate thread-safe objects. --thread_safe_flag_spec=$lt_thread_safe_flag_spec -+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then -+ case $lt_prog_compiler_pic in -+ "" | " "*) ;; -+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; -+ esac -+else -+ lt_prog_compiler_pic= -+ lt_prog_compiler_can_build_shared=no -+fi +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' +- ;; +- gcx) +- # Green Hills C++ Compiler +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++interix[[3-9]]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ++ ;; --# Library versioning type. --version_type=$version_type -+fi +- # The C++ compiler must be used to create the archive. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' +- ;; +- *) +- # GNU C++ compiler with Solaris linker +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' +- if $CC --version | grep -v '^2\.7' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac ++ lt_cv_deplibs_check_method=pass_all ++ ;; --# Format of library name prefix. --libname_spec=$lt_libname_spec +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- else +- # g++ 2.7 appears to require `-G' NOT `-shared' on this +- # platform. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++# This must be Linux ELF. ++linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ lt_cv_deplibs_check_method=pass_all ++ ;; --# List of archive names. First name is the real one, the rest are links. --# The last name is the one that the linker finds with -lNAME. --library_names_spec=$lt_library_names_spec +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- fi ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' ++ fi ++ ;; --# The coded name of the library, if different from the real name. --soname_spec=$lt_soname_spec +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' +- fi +- ;; +- esac ++newos6*) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=/usr/lib/libnls.so ++ ;; ++ ++*nto* | *qnx*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ fi ++ ;; ++ ++osf3* | osf4* | osf5*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++rdos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++solaris*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv4 | sysv4.3*) ++ case $host_vendor in ++ motorola) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ ncr) ++ lt_cv_deplibs_check_method=pass_all + ;; +- tandem*) +- case $cc_basename in +- NCC) +- # NonStop-UX NCC 3.20 +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac ++ sequent) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ++ ;; ++ sni) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" ++ lt_cv_file_magic_test_file=/lib/libc.so + ;; +- vxworks*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ siemens) ++ lt_cv_deplibs_check_method=pass_all + ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ pc) ++ lt_cv_deplibs_check_method=pass_all + ;; ++ esac ++ ;; ++ ++tpf*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + esac +-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++]) ++file_magic_cmd=$lt_cv_file_magic_cmd ++deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown --# Commands used to build and install an old-style archive. --RANLIB=$lt_RANLIB --old_archive_cmds=$lt_old_archive_cmds --old_postinstall_cmds=$lt_old_postinstall_cmds --old_postuninstall_cmds=$lt_old_postuninstall_cmds +-_LT_AC_TAGVAR(GCC, $1)="$GXX" +-_LT_AC_TAGVAR(LD, $1)="$LD" ++_LT_DECL([], [deplibs_check_method], [1], ++ [Method to check whether dependent libraries are shared objects]) ++_LT_DECL([], [file_magic_cmd], [1], ++ [Command to use when deplibs_check_method == "file_magic"]) ++])# _LT_CHECK_MAGIC_METHOD --# Create an old-style archive from a shared archive. --old_archive_from_new_cmds=$lt_old_archive_from_new_cmds +-AC_LIBTOOL_POSTDEP_PREDEP($1) +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF($1) --# Create a temporary old-style archive to link instead of a shared archive. --old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds -+# -+# Check to make sure the static flag actually works. -+# -+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -+if test "${lt_cv_prog_compiler_static_works+set}" = set; then : -+ $as_echo_n "(cached) " >&6 +-AC_LIBTOOL_CONFIG($1) ++# LT_PATH_NM ++# ---------- ++# find the pathname to a BSD- or MS-compatible name lister ++AC_DEFUN([LT_PATH_NM], ++[AC_REQUIRE([AC_PROG_CC])dnl ++AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, ++[if test -n "$NM"; then ++ # Let the user override the test. ++ lt_cv_path_NM="$NM" +else -+ lt_cv_prog_compiler_static_works=no -+ save_LDFLAGS="$LDFLAGS" -+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" -+ echo "$lt_simple_link_test_code" > conftest.$ac_ext -+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then -+ # The linker can only warn and ignore the option if not recognized -+ # So say no if there are warnings -+ if test -s conftest.err; then -+ # Append any errors to the config.log. -+ cat conftest.err 1>&5 -+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp -+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 -+ if diff conftest.exp conftest.er2 >/dev/null; then -+ lt_cv_prog_compiler_static_works=yes -+ fi -+ else -+ lt_cv_prog_compiler_static_works=yes -+ fi -+ fi -+ $RM -r conftest* -+ LDFLAGS="$save_LDFLAGS" - --# Commands used to build and install a shared archive. --archive_cmds=$lt_archive_cmds --archive_expsym_cmds=$lt_archive_expsym_cmds --postinstall_cmds=$lt_postinstall_cmds --postuninstall_cmds=$lt_postuninstall_cmds -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -+$as_echo "$lt_cv_prog_compiler_static_works" >&6; } - --# Commands used to build a loadable module (assumed same as above if empty) --module_cmds=$lt_module_cmds --module_expsym_cmds=$lt_module_expsym_cmds -+if test x"$lt_cv_prog_compiler_static_works" = xyes; then -+ : ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ done ++ IFS="$lt_save_ifs" ++ done ++ : ${lt_cv_path_NM=no} ++fi]) ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" +else -+ lt_prog_compiler_static= ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) ++ AC_SUBST([DUMPBIN]) ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" ++ fi +fi ++test -z "$NM" && NM=nm ++AC_SUBST([NM]) ++_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl --# Commands to strip libraries. --old_striplib=$lt_old_striplib --striplib=$lt_striplib +-AC_LANG_POP +-CC=$lt_save_CC +-LDCXX=$LD +-LD=$lt_save_LD +-GCC=$lt_save_GCC +-with_gnu_ldcxx=$with_gnu_ld +-with_gnu_ld=$lt_save_with_gnu_ld +-lt_cv_path_LDCXX=$lt_cv_path_LD +-lt_cv_path_LD=$lt_save_path_LD +-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +-])# AC_LIBTOOL_LANG_CXX_CONFIG +- +-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +-# ------------------------ +-# Figure out "hidden" library dependencies from verbose +-# compiler output when linking a shared library. +-# Parse the compiler output and extract the necessary +-# objects, libraries and library flags. +-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ +-dnl we can't use the lt_simple_compile_test_code here, +-dnl because it contains code intended for an executable, +-dnl not a library. It's possible we should let each +-dnl tag define a new lt_????_link_test_code variable, +-dnl but it's only used here... +-ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext ++ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) ++ cat conftest.out >&AS_MESSAGE_LOG_FD ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" ++ fi ++ rm -f conftest*]) ++])# LT_PATH_NM ++ ++# Old names: ++AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) ++AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_PROG_NM], []) ++dnl AC_DEFUN([AC_PROG_NM], []) --# Dependencies to place before the objects being linked to create a --# shared library. --predep_objects=$lt_predep_objects +- # Sentinel used to keep track of whether or not we are before +- # the conftest object file. +- pre_test_object_deps_done=no +- +- # The `*' in the case matches for architectures that use `case' in +- # $output_verbose_cmd can trigger glob expansion during the loop +- # eval without this substitution. +- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" --# Dependencies to place after the objects being linked to create a --# shared library. --postdep_objects=$lt_postdep_objects +- for p in `eval $output_verbose_link_cmd`; do +- case $p in +- +- -L* | -R* | -l*) +- # Some compilers place space between "-{L,R}" and the path. +- # Remove the space. +- if test $p = "-L" \ +- || test $p = "-R"; then +- prev=$p +- continue +- else +- prev= +- fi ++# LT_LIB_M ++# -------- ++# check for math library ++AC_DEFUN([LT_LIB_M], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++LIBM= ++case $host in ++*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) ++ # These system don't have libm, or don't need it ++ ;; ++*-ncr-sysv4.3*) ++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") ++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ++ ;; ++*) ++ AC_CHECK_LIB(m, cos, LIBM="-lm") ++ ;; ++esac ++AC_SUBST([LIBM]) ++])# LT_LIB_M + +- if test "$pre_test_object_deps_done" = no; then +- case $p in +- -L* | -R*) +- # Internal compiler library paths should come after those +- # provided the user. The postdeps already come after the +- # user supplied libs so there is no need to process them. +- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then +- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" +- else +- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" +- fi +- ;; +- # The "-l" case would never come before the object being +- # linked, so don't bother handling this case. +- esac +- else +- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then +- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}" +- else +- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}" +- fi +- fi +- ;; ++# Old name: ++AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_CHECK_LIBM], []) --# Dependencies to place before the objects being linked to create a --# shared library. --predeps=$lt_predeps +- *.$objext) +- # This assumes that the test object file only shows up +- # once in the compiler output. +- if test "$p" = "conftest.$objext"; then +- pre_test_object_deps_done=yes +- continue +- fi --# Dependencies to place after the objects being linked to create a --# shared library. --postdeps=$lt_postdeps +- if test "$pre_test_object_deps_done" = no; then +- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then +- _LT_AC_TAGVAR(predep_objects, $1)="$p" +- else +- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p" +- fi +- else +- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then +- _LT_AC_TAGVAR(postdep_objects, $1)="$p" +- else +- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p" +- fi +- fi +- ;; ++# _LT_COMPILER_NO_RTTI([TAGNAME]) ++# ------------------------------- ++m4_defun([_LT_COMPILER_NO_RTTI], ++[m4_require([_LT_TAG_COMPILER])dnl --# The library search path used internally by the compiler when linking --# a shared library. --compiler_lib_search_path=$lt_compiler_lib_search_path +- *) ;; # Ignore the rest. ++_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= --# Method to check whether dependent libraries are shared objects. --deplibs_check_method=$lt_deplibs_check_method -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -+if test "${lt_cv_prog_compiler_c_o+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_prog_compiler_c_o=no -+ $RM -r conftest 2>/dev/null -+ mkdir conftest -+ cd conftest -+ mkdir out -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- esac +- done ++if test "$GCC" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' --# Command to use when deplibs_check_method == file_magic. --file_magic_cmd=$lt_file_magic_cmd -+ lt_compiler_flag="-o out/conftest2.$ac_objext" -+ # Insert the option either (1) after the last *FLAGS variable, or -+ # (2) before a word containing "conftest.", or (3) at the end. -+ # Note that $ac_compile itself does not contain backslashes and begins -+ # with a dollar sign (not a hyphen), so the echo should work correctly. -+ lt_compile=`echo "$ac_compile" | $SED \ -+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -+ -e 's:$: $lt_compiler_flag:'` -+ (eval echo "\"\$as_me:8837: $lt_compile\"" >&5) -+ (eval "$lt_compile" 2>out/conftest.err) -+ ac_status=$? -+ cat out/conftest.err >&5 -+ echo "$as_me:8841: \$? = $ac_status" >&5 -+ if (exit $ac_status) && test -s out/conftest2.$ac_objext -+ then -+ # The compiler can only warn and ignore the option if not recognized -+ # So say no if there are warnings -+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp -+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 -+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then -+ lt_cv_prog_compiler_c_o=yes -+ fi -+ fi -+ chmod u+w . 2>&5 -+ $RM conftest* -+ # SGI C++ compiler will create directory out/ii_files/ for -+ # template instantiation -+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files -+ $RM out/* && rmdir out -+ cd .. -+ $RM -r conftest -+ $RM conftest* +- # Clean up. +- rm -f a.out a.exe +-else +- echo "libtool.m4: error: problem compiling $1 test program" ++ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], ++ lt_cv_prog_compiler_rtti_exceptions, ++ [-fno-rtti -fno-exceptions], [], ++ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) + fi ++_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], ++ [Compiler flag to turn off builtin functions]) ++])# _LT_COMPILER_NO_RTTI --# Flag that allows shared libraries with undefined symbols to be built. --allow_undefined_flag=$lt_allow_undefined_flag -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -+$as_echo "$lt_cv_prog_compiler_c_o" >&6; } +-$rm -f confest.$objext +- +-case " $_LT_AC_TAGVAR(postdeps, $1) " in +-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; +-esac +-])# AC_LIBTOOL_POSTDEP_PREDEP +- +-# AC_LIBTOOL_LANG_F77_CONFIG +-# ------------------------ +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) +-AC_DEFUN([_LT_AC_LANG_F77_CONFIG], +-[AC_REQUIRE([AC_PROG_F77]) +-AC_LANG_PUSH(Fortran 77) +- +-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +-_LT_AC_TAGVAR(allow_undefined_flag, $1)= +-_LT_AC_TAGVAR(always_export_symbols, $1)=no +-_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_direct, $1)=no +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +-_LT_AC_TAGVAR(hardcode_automatic, $1)=no +-_LT_AC_TAGVAR(module_cmds, $1)= +-_LT_AC_TAGVAR(module_expsym_cmds, $1)= +-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +-_LT_AC_TAGVAR(no_undefined_flag, $1)= +-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no +- +-# Source file extension for f77 test sources. +-ac_ext=f +- +-# Object file extension for compiled f77 test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code=" subroutine t\n return\n end\n" +- +-# Code to be used in simple link tests +-lt_simple_link_test_code=" program t\n end\n" --# Flag that forces no undefined symbols. --no_undefined_flag=$lt_no_undefined_flag +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER ++# _LT_CMD_GLOBAL_SYMBOLS ++# ---------------------- ++m4_defun([_LT_CMD_GLOBAL_SYMBOLS], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++AC_REQUIRE([LT_PATH_LD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_TAG_COMPILER])dnl --# Commands used to finish a libtool library installation in a directory. --finish_cmds=$lt_finish_cmds +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${F77-"f77"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC +-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++AC_MSG_CHECKING([command to parse $NM output from $compiler object]) ++AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], ++[ ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] --# Same as above, but a single script fragment to be evaled but not shown. --finish_eval=$lt_finish_eval +-AC_MSG_CHECKING([if libtool supports shared libraries]) +-AC_MSG_RESULT([$can_build_shared]) ++# Character class describing NM global symbol codes. ++symcode='[[BCDEGRST]]' --# Take the output of nm and produce a listing of raw symbols and C names. --global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe +-AC_MSG_CHECKING([whether to build shared libraries]) +-test "$can_build_shared" = "no" && enable_shared=no ++# Regexp to match symbols that can be accessed directly from C. ++sympat='$[[_A-Za-z]][[_A-Za-z0-9]]*$' --# Transform the output of nm in a proper C declaration --global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case "$host_os" in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[[BCDT]]' ++ ;; ++cygwin* | mingw* | pw32* | cegcc*) ++ symcode='[[ABCDGISTW]]' ++ ;; ++hpux*) ++ if test "$host_cpu" = ia64; then ++ symcode='[[ABCDEGRST]]' + fi + ;; +-aix4* | aix5*) +- test "$enable_shared" = yes && enable_static=no ++irix* | nonstopux*) ++ symcode='[[BCDEGRST]]' ++ ;; ++osf*) ++ symcode='[[BCDEGQRST]]' ++ ;; ++solaris*) ++ symcode='[[BDRT]]' ++ ;; ++sco3.2v5*) ++ symcode='[[DT]]' ++ ;; ++sysv4.2uw2*) ++ symcode='[[DT]]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[[ABDT]]' ++ ;; ++sysv4) ++ symcode='[[DFNSTU]]' + ;; + esac +-AC_MSG_RESULT([$enable_shared]) +- +-AC_MSG_CHECKING([whether to build static libraries]) +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-AC_MSG_RESULT([$enable_static]) +- +-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +- +-_LT_AC_TAGVAR(GCC, $1)="$G77" +-_LT_AC_TAGVAR(LD, $1)="$LD" +- +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +- +- +-AC_LIBTOOL_CONFIG($1) --# Transform the output of nm in a C name address pair --global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -+if test "${lt_cv_prog_compiler_c_o+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_prog_compiler_c_o=no -+ $RM -r conftest 2>/dev/null -+ mkdir conftest -+ cd conftest -+ mkdir out -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext +-AC_LANG_POP +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_F77_CONFIG +- +- +-# AC_LIBTOOL_LANG_GCJ_CONFIG +-# -------------------------- +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) +-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], +-[AC_LANG_SAVE +- +-# Source file extension for Java test sources. +-ac_ext=java +- +-# Object file extension for compiled Java test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="class foo {}\n" ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[[ABCDGIRSTW]]' ;; ++esac --# This is the shared library runtime path variable. --runpath_var=$runpath_var -+ lt_compiler_flag="-o out/conftest2.$ac_objext" -+ # Insert the option either (1) after the last *FLAGS variable, or -+ # (2) before a word containing "conftest.", or (3) at the end. -+ # Note that $ac_compile itself does not contain backslashes and begins -+ # with a dollar sign (not a hyphen), so the echo should work correctly. -+ lt_compile=`echo "$ac_compile" | $SED \ -+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -+ -e 's:$: $lt_compiler_flag:'` -+ (eval echo "\"\$as_me:8892: $lt_compile\"" >&5) -+ (eval "$lt_compile" 2>out/conftest.err) -+ ac_status=$? -+ cat out/conftest.err >&5 -+ echo "$as_me:8896: \$? = $ac_status" >&5 -+ if (exit $ac_status) && test -s out/conftest2.$ac_objext -+ then -+ # The compiler can only warn and ignore the option if not recognized -+ # So say no if there are warnings -+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp -+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 -+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then -+ lt_cv_prog_compiler_c_o=yes -+ fi -+ fi -+ chmod u+w . 2>&5 -+ $RM conftest* -+ # SGI C++ compiler will create directory out/ii_files/ for -+ # template instantiation -+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files -+ $RM out/* && rmdir out -+ cd .. -+ $RM -r conftest -+ $RM conftest* +-# Code to be used in simple link tests +-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' ++# Transform an extracted symbol line into a proper C declaration. ++# Some systems (esp. on ia64) link data and code symbols differently, ++# so use this general approach. ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" --# This is the shared library path variable. --shlibpath_var=$shlibpath_var -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -+$as_echo "$lt_cv_prog_compiler_c_o" >&6; } +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $lib[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"lib\2\", (void *) \&\2},/p'" --# Is shlibpath searched before the hard-coded library search path? --shlibpath_overrides_runpath=$shlibpath_overrides_runpath +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${GCJ-"gcj"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++ ;; ++esac --# How to hardcode a shared library path into an executable. --hardcode_action=$hardcode_action +-# GCJ did not exist at the time GCC didn't implicitly link libc in. +-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++# Try without a prefix underscore, then with it. ++for ac_symprfx in "" "_"; do --# Whether we should hardcode library paths into libraries. --hardcode_into_libs=$hardcode_into_libs +-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF($1) ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" --# Flag to hardcode \$libdir into a binary during linking. --# This must work even if \$libdir does not exist. --hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec -+hard_links="nottested" -+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then -+ # do not overwrite the value of need_locks provided by the user -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -+$as_echo_n "checking if we can lock with hard links... " >&6; } -+ hard_links=yes -+ $RM conftest* -+ ln conftest.a conftest.b 2>/dev/null && hard_links=no -+ touch conftest.a -+ ln conftest.a conftest.b 2>&5 || hard_links=no -+ ln conftest.a conftest.b 2>/dev/null && hard_links=no -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -+$as_echo "$hard_links" >&6; } -+ if test "$hard_links" = no; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} -+ need_locks=warn +-AC_LIBTOOL_CONFIG($1) ++ # Write the raw and C identifiers. ++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ # Fake it for dumpbin and say T for any non-static function ++ # and D for any global variable. ++ # Also find C++ and __fastcall symbols from MSVC++, ++ # which start with @ or ?. ++ lt_cv_sys_global_symbol_pipe="$AWK ['"\ ++" {last_section=section; section=\$ 3};"\ ++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ ++" \$ 0!~/External *\|/{next};"\ ++" / 0+ UNDEF /{next}; / UNDEF $[^|]$*()/{next};"\ ++" {if(hide[section]) next};"\ ++" {f=0}; \$ 0~/.*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ ++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ ++" s[1]~/^[@?]/{print s[1], s[1]; next};"\ ++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ ++" ' prfx=^$ac_symprfx]" ++ else ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]$$symcode$symcode*$[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi -+else -+ need_locks=no -+fi --# If ld is used when linking, flag to hardcode \$libdir into --# a binary during linking. This must work even if \$libdir does --# not exist. --hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - --# Whether we need a single -rpath flag with a separated argument. --hardcode_libdir_separator=$lt_hardcode_libdir_separator -- --# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the --# resulting binary. --hardcode_direct=$hardcode_direct -- --# Set to yes if using the -LDIR flag during linking hardcodes DIR into the --# resulting binary. --hardcode_minus_L=$hardcode_minus_L -- --# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into --# the resulting binary. --hardcode_shlibpath_var=$hardcode_shlibpath_var +-AC_LANG_RESTORE +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_GCJ_CONFIG ++ # Check to see that the pipe works correctly. ++ pipe_works=no --# Set to yes if building a shared library automatically hardcodes DIR into the library --# and all subsequent libraries and executables linked against it. --hardcode_automatic=$hardcode_automatic ++ rm -f conftest* ++ cat > conftest.$ac_ext <<_LT_EOF ++#ifdef __cplusplus ++extern "C" { ++#endif ++char nm_test_var; ++void nm_test_func(void); ++void nm_test_func(void){} ++#ifdef __cplusplus ++} ++#endif ++int main(){nm_test_var='a';nm_test_func();return(0);} ++_LT_EOF --# Variables whose values should be saved in libtool wrapper scripts and --# restored at relink time. --variables_saved_for_relink="$variables_saved_for_relink" +-# AC_LIBTOOL_LANG_RC_CONFIG +-# -------------------------- +-# Ensure that the configuration vars for the Windows resource compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) +-AC_DEFUN([_LT_AC_LANG_RC_CONFIG], +-[AC_LANG_SAVE ++ if AC_TRY_EVAL(ac_compile); then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi --# Whether libtool must link a program against all its dependency libraries. --link_all_deplibs=$link_all_deplibs +-# Source file extension for RC test sources. +-ac_ext=rc ++ # Make sure that we snagged all the symbols we need. ++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then ++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then ++ cat <<_LT_EOF > conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif --# Compile-time system search path for libraries --sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } +-# Object file extension for compiled RC test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext ++_LT_EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' --# Run-time system search path for libraries --sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -+ runpath_var= -+ allow_undefined_flag= -+ always_export_symbols=no -+ archive_cmds= -+ archive_expsym_cmds= -+ compiler_needs_object=no -+ enable_shared_with_static_runtimes=no -+ export_dynamic_flag_spec= -+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -+ hardcode_automatic=no -+ hardcode_direct=no -+ hardcode_direct_absolute=no -+ hardcode_libdir_flag_spec= -+ hardcode_libdir_flag_spec_ld= -+ hardcode_libdir_separator= -+ hardcode_minus_L=no -+ hardcode_shlibpath_var=unsupported -+ inherit_rpath=no -+ link_all_deplibs=unknown -+ module_cmds= -+ module_expsym_cmds= -+ old_archive_from_new_cmds= -+ old_archive_from_expsyms_cmds= -+ thread_safe_flag_spec= -+ whole_archive_flag_spec= -+ # include_expsyms should be a list of space-separated symbols to be *always* -+ # included in the symbol list -+ include_expsyms= -+ # exclude_expsyms can be an extended regexp of symbols to exclude -+ # it will be wrapped by ` (' and `)$', so one must not match beginning or -+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -+ # as well as any symbol that contains `d'. -+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' -+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -+ # platforms (ab)use it in PIC code, but their linkers get confused if -+ # the symbol is explicitly referenced. Since portable code cannot -+ # rely on this symbol name, it's probably fine to never include it in -+ # preloaded symbol tables. -+ # Exclude shared library initialization/finalization symbols. -+ extract_expsyms_cmds= +-# Code to be used in simple compile tests +-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' ++ cat <<_LT_EOF >> conftest.$ac_ext --# Fix the shell variable \$srcfile for the compiler. --fix_srcfile_path="$fix_srcfile_path" -+ case $host_os in -+ cygwin* | mingw* | pw32* | cegcc*) -+ # FIXME: the MSVC++ port hasn't been tested in a loooong time -+ # When not using gcc, we currently assume that we are using -+ # Microsoft Visual C++. -+ if test "$GCC" != yes; then -+ with_gnu_ld=no -+ fi -+ ;; -+ interix*) -+ # we just hope/assume this is gcc and not c89 (= MSVC++) -+ with_gnu_ld=yes -+ ;; -+ openbsd*) -+ with_gnu_ld=no -+ ;; -+ linux* | k*bsd*-gnu) -+ link_all_deplibs=no -+ ;; -+ esac +-# Code to be used in simple link tests +-lt_simple_link_test_code="$lt_simple_compile_test_code" ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ void *address; ++} ++lt__PROGRAM__LTX_preloaded_symbols[[]] = ++{ ++ { "@PROGRAM@", (void *) 0 }, ++_LT_EOF ++ $SED "s/^$symcode$symcode* $.*$ $.*$$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext ++ cat <<\_LT_EOF >> conftest.$ac_ext ++ {0, (void *) 0} ++}; --# Set to yes if exported symbols are required. --always_export_symbols=$always_export_symbols -+ ld_shlibs=yes -+ if test "$with_gnu_ld" = yes; then -+ # If archive_cmds runs LD, not CC, wlarc should be empty -+ wlarc='${wl}' +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt__PROGRAM__LTX_preloaded_symbols; ++} ++#endif --# The commands to list exported symbols. --export_symbols_cmds=$lt_export_symbols_cmds -+ # Set some defaults for GNU ld with shared library support. These -+ # are reset later if shared libraries are not supported. Putting them -+ # here allows them to be overridden if necessary. -+ runpath_var=LD_RUN_PATH -+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -+ export_dynamic_flag_spec='${wl}--export-dynamic' -+ # ancient GNU ld didn't support --whole-archive et. al. -+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then -+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +-# Allow CC to be a program name with arguments. ++#ifdef __cplusplus ++} ++#endif ++_LT_EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD ++ fi + else -+ whole_archive_flag_spec= ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi -+ supports_anon_versioning=no -+ case `$LD -v 2>&1` in -+ *GNU\ gold*) supports_anon_versioning=yes ;; -+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 -+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... -+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... -+ *\ 2.11.*) ;; # other 2.11 versions -+ *) supports_anon_versioning=yes ;; ++ else ++ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD ++ cat conftest.$ac_ext >&5 ++ fi ++ rm -rf conftest* conftst* ++ ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= ++ fi ++done ++]) ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ AC_MSG_RESULT(failed) ++else ++ AC_MSG_RESULT(ok) ++fi ++ ++_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], ++ [Take the output of nm and produce a listing of raw symbols and C names]) ++_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], ++ [Transform the output of nm in a proper C declaration]) ++_LT_DECL([global_symbol_to_c_name_address], ++ [lt_cv_sys_global_symbol_to_c_name_address], [1], ++ [Transform the output of nm in a C name address pair]) ++_LT_DECL([global_symbol_to_c_name_address_lib_prefix], ++ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], ++ [Transform the output of nm in a C name address pair when lib prefix is needed]) ++]) # _LT_CMD_GLOBAL_SYMBOLS ++ ++ ++# _LT_COMPILER_PIC([TAGNAME]) ++# --------------------------- ++m4_defun([_LT_COMPILER_PIC], ++[m4_require([_LT_TAG_COMPILER])dnl ++_LT_TAGVAR(lt_prog_compiler_wl, $1)= ++_LT_TAGVAR(lt_prog_compiler_pic, $1)= ++_LT_TAGVAR(lt_prog_compiler_static, $1)= ++ ++AC_MSG_CHECKING([for $compiler option to produce PIC]) ++m4_if([$1], [CXX], [ ++ # C++ specific cases for pic, static, wl, etc. ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac ++ ;; ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ mingw* | cygwin* | os2* | pw32* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ ;; ++ *djgpp*) ++ # DJGPP does not support shared libraries at all ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ interix[[3-9]]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic ++ fi ++ ;; ++ hpux*) ++ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit ++ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag ++ # sets the default TLS model and affects inlining. ++ case $host_cpu in ++ hppa*64*) ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ ;; ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; + esac - --# The commands to extract the exported symbol list from a shared archive. --extract_expsyms_cmds=$lt_extract_expsyms_cmds -+ # See if GNU ld supports shared libraries. ++ else + case $host_os in -+ aix[3-9]*) -+ # On AIX/PPC, the GNU linker is very broken -+ if test "$host_cpu" != ia64; then -+ ld_shlibs=no -+ cat <<_LT_EOF 1>&2 - --# Symbols that should not be listed in the preloaded symbols. --exclude_expsyms=$lt_exclude_expsyms -+*** Warning: the GNU linker, at least up to release 2.9.1, is reported -+*** to be unable to reliably create shared libraries on AIX. -+*** Therefore, libtool is disabling shared libraries support. If you -+*** really care for shared libraries, you may want to modify your PATH -+*** so that a non-GNU linker is found, and then restart. - --# Symbols that must always be exported. --include_expsyms=$lt_include_expsyms -+_LT_EOF ++ aix[[4-9]]*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ else ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ chorus*) ++ case $cc_basename in ++ cxch68*) ++ # Green Hills C++ Compiler ++ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ++ ;; ++ esac ++ ;; ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ freebsd* | dragonfly*) ++ # FreeBSD uses GNU C++ ++ ;; ++ hpux9* | hpux10* | hpux11*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ if test "$host_cpu" != ia64; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ fi ++ ;; ++ aCC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ ;; ++ esac ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? ++ ;; ++ irix5* | irix6* | nonstopux*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ # CC pic flag -KPIC is the default. ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ KCC*) ++ # KAI C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ ecpc* ) ++ # old Intel C++ for x86_64 which still supported -KPIC. ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ icpc* ) ++ # Intel C++, used to be incompatible with GCC. ++ # ICC 10 doesn't accept -KPIC any more. ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ cxx*) ++ # Compaq C++ ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ xlc* | xlC*) ++ # IBM XL 8.0 on PPC ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ lynxos*) ++ ;; ++ m88k*) ++ ;; ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ ;; ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ cxx*) ++ # Digital/Compaq C++ ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ psos*) ++ ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ lcc*) ++ # Lucid ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ esac ++ ;; ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ vxworks*) ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++], ++[ ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; - --# ### END LIBTOOL CONFIG ++ + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support -+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds='' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) -+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -+ hardcode_libdir_flag_spec='-L$libdir' -+ hardcode_minus_L=yes ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; - --__EOF__ -+ beos*) -+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ allow_undefined_flag=unsupported -+ # Joseph Beckenbach says some releases of gcc -+ # support --undefined. This deserves some investigation. FIXME -+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ else -+ ld_shlibs=no ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ ;; ++ ++ hpux*) ++ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit ++ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag ++ # sets the default TLS model and affects inlining. ++ case $host_cpu in ++ hppa*64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ interix[[3-9]]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ enable_shared=no ++ ;; ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; - -+ cygwin* | mingw* | pw32* | cegcc*) -+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, -+ # as there is no search path for DLLs. -+ hardcode_libdir_flag_spec='-L$libdir' -+ allow_undefined_flag=unsupported -+ always_export_symbols=no -+ enable_shared_with_static_runtimes=yes -+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - -- case $host_os in -- aix3*) -- cat <<\EOF >> "$cfgfile" -+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then -+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ # If the export-symbols file already is a .def file (1st line -+ # is EXPORTS), use it as is; otherwise, prepend... -+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ cp $export_symbols $output_objdir/$soname.def; -+ else -+ echo EXPORTS > $output_objdir/$soname.def; -+ cat $export_symbols >> $output_objdir/$soname.def; -+ fi~ -+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else -+ ld_shlibs=no ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; - --# AIX sometimes has problems with the GCC collect2 program. For some --# reason, if we set the COLLECT_NAMES environment variable, the problems --# vanish in a puff of smoke. --if test "X${COLLECT_NAMES+set}" != Xset; then -- COLLECT_NAMES= -- export COLLECT_NAMES --fi --EOF -- ;; -- esac -+ interix[3-9]*) -+ hardcode_direct=no -+ hardcode_shlibpath_var=no -+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' -+ export_dynamic_flag_spec='${wl}-E' -+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. -+ # Instead, shared libraries are loaded at an image base (0x10000000 by -+ # default) and relocated if they conflict, which is a slow very memory -+ # consuming and fragmenting process. To avoid this, we pick a random, -+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link -+ # time. Moving up from 0x10000000 also allows more sbrk(2) space. -+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' -+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ++ mingw* | cygwin* | pw32* | os2* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; - -- # We use sed instead of cat because bash on DJGPP gets confused if -- # if finds mixed CR/LF and LF-only lines. Since sed operates in -- # text mode, it properly converts lines to CR/LF. This bash problem -- # is reportedly fixed, but why not run on old versions too? -- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) -+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) -+ tmp_diet=no -+ if test "$host_os" = linux-dietlibc; then -+ case $cc_basename in -+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) -+ esac -+ fi -+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ -+ && test "$tmp_diet" = no -+ then -+ tmp_addflag= -+ tmp_sharedflag='-shared' -+ case $cc_basename,$host_cpu in -+ pgcc*) # Portland Group C compiler -+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ tmp_addflag=' $pic_flag' -+ ;; -+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers -+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ tmp_addflag=' $pic_flag -Mnomain' ;; -+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 -+ tmp_addflag=' -i_dynamic' ;; -+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 -+ tmp_addflag=' -i_dynamic -nofor_main' ;; -+ ifc* | ifort*) # Intel Fortran compiler -+ tmp_addflag=' -nofor_main' ;; -+ lf95*) # Lahey Fortran 8.1 -+ whole_archive_flag_spec= -+ tmp_sharedflag='--shared' ;; -+ xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) -+ tmp_sharedflag='-qmkshrobj' -+ tmp_addflag= ;; -+ esac ++ ++ hpux9* | hpux10* | hpux11*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC (with -KPIC) is the default. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ # old Intel for x86_64 which still supported -KPIC. ++ ecc*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ # icc used to be incompatible with GCC. ++ # ICC 10 doesn't accept -KPIC any more. ++ icc* | ifort*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ # Lahey Fortran 8.1. ++ lf95*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ccc*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All Alpha code is PIC. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ xl*) ++ # IBM XL C 8.0/Fortran 10.1 on PPC ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ++ ;; ++ *) + case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) # Sun C 5.9 -+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ compiler_needs_object=yes -+ tmp_sharedflag='-G' ;; -+ *Sun\ F*) # Sun Fortran 8.3 -+ tmp_sharedflag='-G' ;; -+ esac -+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - -- mv -f "$cfgfile" "$ofile" || \ -- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") -- chmod +x "$ofile" -+ if test "x$supports_anon_versioning" = xyes; then -+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ -+ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ -+ echo "local: *; };" >> $output_objdir/$libname.ver~ -+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' -+ fi - --else -- # If there is no Makefile yet, we rely on a make rule to execute -- # `config.status --recheck' to rerun these tests and create the -- # libtool script then. -- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` -- if test -f "$ltmain_in"; then -- test -f Makefile && make "$ltmain" -- fi --fi -+ case $cc_basename in -+ xlf*) -+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself -+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' -+ hardcode_libdir_flag_spec= -+ hardcode_libdir_flag_spec_ld='-rpath $libdir' -+ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' -+ if test "x$supports_anon_versioning" = xyes; then -+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ -+ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ -+ echo "local: *; };" >> $output_objdir/$libname.ver~ -+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' -+ fi ++ *Sun\ C*) ++ # Sun C 5.9 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + esac -+ else -+ ld_shlibs=no -+ fi ++ ;; ++ esac + ;; - -+ netbsd* | netbsdelf*-gnu) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' -+ wlarc= -+ else -+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ fi ++ ++ newsos6) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; - --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All OSF/1 code is PIC. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ rdos*) ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ + solaris*) -+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then -+ ld_shlibs=no ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ unicos*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ ++ uts4*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ *) ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++]) ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ++ ;; ++esac ++AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) ++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], ++ [How to pass a linker flag through the compiler]) ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then ++ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], ++ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], ++ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], ++ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in ++ "" | " "*) ;; ++ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; ++ esac], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) ++fi ++_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], ++ [Additional compiler flags for building library objects]) ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" ++_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], ++ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), ++ $lt_tmp_static_flag, ++ [], ++ [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) ++_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], ++ [Compiler flag to prevent dynamic linking]) ++])# _LT_COMPILER_PIC ++ ++ ++# _LT_LINKER_SHLIBS([TAGNAME]) ++# ---------------------------- ++# See if the linker supports building shared libraries. ++m4_defun([_LT_LINKER_SHLIBS], ++[AC_REQUIRE([LT_PATH_LD])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++m4_require([_LT_TAG_COMPILER])dnl ++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++m4_if([$1], [CXX], [ ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ case $host_os in ++ aix[[4-9]]*) ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ ;; ++ pw32*) ++ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ++ ;; ++ cygwin* | mingw* | cegcc*) ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__$[[^ ]]*$[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ linux* | k*bsd*-gnu) ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ esac ++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++], [ ++ runpath_var= ++ _LT_TAGVAR(allow_undefined_flag, $1)= ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(archive_cmds, $1)= ++ _LT_TAGVAR(archive_expsym_cmds, $1)= ++ _LT_TAGVAR(compiler_needs_object, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_TAGVAR(hardcode_automatic, $1)=no ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ _LT_TAGVAR(hardcode_minus_L, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_TAGVAR(inherit_rpath, $1)=no ++ _LT_TAGVAR(link_all_deplibs, $1)=unknown ++ _LT_TAGVAR(module_cmds, $1)= ++ _LT_TAGVAR(module_expsym_cmds, $1)= ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)= ++ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= ++ _LT_TAGVAR(thread_safe_flag_spec, $1)= ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ _LT_TAGVAR(include_expsyms, $1)= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++dnl Note also adjust exclude_expsyms for C++ above. ++ extract_expsyms_cmds= ++ ++ case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ linux* | k*bsd*-gnu) ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ ;; ++ esac ++ ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>&1` in ++ *GNU\ gold*) supports_anon_versioning=yes ;; ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix[[3-9]]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 - --CC="$lt_save_CC" -+*** Warning: The releases 2.8.* of the GNU linker cannot reliably -+*** create shared libraries on Solaris systems. Therefore, libtool -+*** is disabling shared libraries support. We urge you to upgrade GNU -+*** binutils to release 2.9.1 or newer. Another option is to modify -+*** your PATH or compiler configuration so that the native linker is -+*** used, and then restart. - ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ +_LT_EOF -+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ else -+ ld_shlibs=no + fi + ;; - --# Check whether --with-tags or --without-tags was given. --if test "${with_tags+set}" = set; then -- withval="$with_tags" -- tagnames="$withval" --fi; -+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) -+ case `$LD -v 2>&1` in -+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) -+ ld_shlibs=no -+ cat <<_LT_EOF 1>&2 - --if test -f "$ltmain" && test -n "$tagnames"; then -- if test ! -f "${ofile}"; then -- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 --echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} -- fi -+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -+*** reliably create shared libraries on SCO systems. Therefore, libtool -+*** is disabling shared libraries support. We urge you to upgrade GNU -+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -+*** your PATH or compiler configuration so that the native linker is -+*** used, and then restart. - -- if test -z "$LTCC"; then -- eval "`$SHELL ${ofile} --config | grep '^LTCC='`" -- if test -z "$LTCC"; then -- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 --echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} -- else -- { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 --echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} -- fi -- fi -+_LT_EOF -+ ;; -+ *) -+ # For security reasons, it is highly recommended that you always -+ # use absolute paths for naming shared libraries, and exclude the -+ # DT_RUNPATH tag from executables and libraries. But doing so -+ # requires that you compile everything twice, which is a pain. -+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ else -+ ld_shlibs=no -+ fi -+ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='' ++ ;; ++ m68k) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; + esac + ;; - -- # Extract list of available tagged configurations in $ofile. -- # Note that this assumes the entire list is on one line. -- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=$.*$$/\1/' -e 's/\"//g'` -+ sunos4*) -+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' -+ wlarc= -+ hardcode_direct=yes -+ hardcode_shlibpath_var=no -+ ;; - -- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -- for tagname in $tagnames; do -- IFS="$lt_save_ifs" -- # Check whether tagname contains only valid characters -- case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in -- "") ;; -- *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 --echo "$as_me: error: invalid tag name: $tagname" >&2;} -- { (exit 1); exit 1; }; } -- ;; -+ *) ++ ++ beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else -+ ld_shlibs=no -+ fi -+ ;; - esac - -- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null -- then -- { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 --echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} -- { (exit 1); exit 1; }; } -+ if test "$ld_shlibs" = no; then -+ runpath_var= -+ hardcode_libdir_flag_spec= -+ export_dynamic_flag_spec= -+ whole_archive_flag_spec= - fi -+ else -+ # PORTME fill in a description of your system's linker (not GNU ld) -+ case $host_os in -+ aix3*) -+ allow_undefined_flag=unsupported -+ always_export_symbols=yes -+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' -+ # Note: this linker hardcodes the directories in LIBPATH if there -+ # are no directories specified by -L. -+ hardcode_minus_L=yes -+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then -+ # Neither direct hardcoding nor static linking is supported with a -+ # broken collect2. -+ hardcode_direct=unsupported ++ _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; - -- # Update the list of available tags. -- if test -n "$tagname"; then -- echo appending configuration tag \"$tagname\" to $ofile -- -- case $tagname in -- CXX) -- if test -n "$CXX" && test "X$CXX" != "Xno"; then -- ac_ext=cc --ac_cpp='$CXXCPP $CPPFLAGS' --ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -- -- -- -+ aix[4-9]*) -+ if test "$host_cpu" = ia64; then -+ # On IA64, the linker does run time linking by default, so we don't -+ # have to do anything special. -+ aix_use_runtimelinking=no -+ exp_sym_flag='-Bexport' -+ no_entry_flag="" -+ else -+ # If we're using GNU nm, then we don't want the "-C" option. -+ # -C means demangle to AIX nm, but means don't demangle with GNU nm -+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then -+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ else -+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ fi -+ aix_use_runtimelinking=no - --archive_cmds_need_lc_CXX=no --allow_undefined_flag_CXX= --always_export_symbols_CXX=no --archive_expsym_cmds_CXX= --export_dynamic_flag_spec_CXX= --hardcode_direct_CXX=no --hardcode_libdir_flag_spec_CXX= --hardcode_libdir_flag_spec_ld_CXX= --hardcode_libdir_separator_CXX= --hardcode_minus_L_CXX=no --hardcode_automatic_CXX=no --module_cmds_CXX= --module_expsym_cmds_CXX= --link_all_deplibs_CXX=unknown --old_archive_cmds_CXX=$old_archive_cmds --no_undefined_flag_CXX= --whole_archive_flag_spec_CXX= --enable_shared_with_static_runtimes_CXX=no -- --# Dependencies to place before and after the object being linked: --predep_objects_CXX= --postdep_objects_CXX= --predeps_CXX= --postdeps_CXX= --compiler_lib_search_path_CXX= -- --# Source file extension for C++ test sources. --ac_ext=cc -- --# Object file extension for compiled C++ test sources. --objext=o --objext_CXX=$objext -- --# Code to be used in simple compile tests --lt_simple_compile_test_code="int some_variable = 0;\n" -- --# Code to be used in simple link tests --lt_simple_link_test_code='int main(int, char *) { return(0); }\n' -- --# ltmain only uses $CC for tagged configurations so make sure $CC is set. -- --# If no C compiler was specified, use CC. --LTCC=${LTCC-"$CC"} -- --# Allow CC to be a program name with arguments. --compiler=$CC -- -- --# Allow CC to be a program name with arguments. --lt_save_CC=$CC --lt_save_LD=$LD --lt_save_GCC=$GCC --GCC=$GXX --lt_save_with_gnu_ld=$with_gnu_ld --lt_save_path_LD=$lt_cv_path_LD --if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then -- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx --else -- unset lt_cv_prog_gnu_ld --fi --if test -n "${lt_cv_path_LDCXX+set}"; then -- lt_cv_path_LD=$lt_cv_path_LDCXX --else -- unset lt_cv_path_LD --fi --test -z "${LDCXX+set}" || LD=$LDCXX --CC=${CXX-"c++"} --compiler=$CC --compiler_CXX=$CC --cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` -- --# We don't want -fno-exception wen compiling C++ code, so set the --# no_builtin_flag separately --if test "$GXX" = yes; then -- lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' --else -- lt_prog_compiler_no_builtin_flag_CXX= --fi -- --if test "$GXX" = yes; then -- # Set up default GNU C++ configuration -- -- --# Check whether --with-gnu-ld or --without-gnu-ld was given. --if test "${with_gnu_ld+set}" = set; then -- withval="$with_gnu_ld" -- test "$withval" = no || with_gnu_ld=yes --else -- with_gnu_ld=no --fi; --ac_prog=ld --if test "$GCC" = yes; then -- # Check if gcc -print-prog-name=ld gives a path. -- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 --echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 -- case $host in -- *-*-mingw*) -- # gcc leaves a trailing carriage return which upsets mingw -- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; -- *) -- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; -- esac -- case $ac_prog in -- # Accept absolute paths. -- [\\/]* | ?:[\\/]*) -- re_direlt='/[^/][^/]*/\.\./' -- # Canonicalize the pathname of ld -- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` -- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do -- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` -- done -- test -z "$LD" && LD="$ac_prog" -- ;; -- "") -- # If it fails, then pretend we aren't using GCC. -- ac_prog=ld -- ;; -- *) -- # If it is relative, then search for the first ld in PATH. -- with_gnu_ld=unknown -- ;; -- esac --elif test "$with_gnu_ld" = yes; then -- echo "$as_me:$LINENO: checking for GNU ld" >&5 --echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 --else -- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 --echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 --fi --if test "${lt_cv_path_LD+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -z "$LD"; then -- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -- for ac_dir in $PATH; do -- IFS="$lt_save_ifs" -- test -z "$ac_dir" && ac_dir=. -- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then -- lt_cv_path_LD="$ac_dir/$ac_prog" -- # Check to see if the program is GNU ld. I'd rather use --version, -- # but apparently some GNU ld's only accept -v. -- # Break only if it was the GNU/non-GNU ld that we prefer. -- case `"$lt_cv_path_LD" -v 2>&1 &5 --echo "${ECHO_T}$LD" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi --test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 --echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} -- { (exit 1); exit 1; }; } --echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 --echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 --if test "${lt_cv_prog_gnu_ld+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- # I'd rather use --version here, but apparently some GNU ld's only accept -v. --case `$LD -v 2>&1 &5 --echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 --with_gnu_ld=$lt_cv_prog_gnu_ld -- -- -- -- # Check if GNU C++ uses GNU ld as the underlying linker, since the -- # archiving commands below assume that GNU ld is being used. -- if test "$with_gnu_ld" = yes; then -- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- -- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' -- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -- -- # If archive_cmds runs LD, not CC, wlarc should be empty -- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to -- # investigate it a little bit more. (MM) -- wlarc='${wl}' -- -- # ancient GNU ld didn't support --whole-archive et. al. -- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ -- grep 'no-whole-archive' > /dev/null; then -- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -- else -- whole_archive_flag_spec_CXX= -- fi -- else -- with_gnu_ld=no -- wlarc= -- -- # A generic and very simple default shared library creation -- # command for GNU C++ for the case where it uses the native -- # linker, instead of GNU ld. If possible, this setting should -- # overridden to take advantage of the native linker features on -- # the platform it is being used on. -- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' -- fi -- -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' -- --else -- GXX=no -- with_gnu_ld=no -- wlarc= --fi -- --# PORTME: fill in a description of your system's C++ link characteristics --echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 --echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 --ld_shlibs_CXX=yes --case $host_os in -- aix3*) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- aix4* | aix5*) -- if test "$host_cpu" = ia64; then -- # On IA64, the linker does run time linking by default, so we don't -- # have to do anything special. -- aix_use_runtimelinking=no -- exp_sym_flag='-Bexport' -- no_entry_flag="" -- else -- aix_use_runtimelinking=no -- -- # Test if we are trying to use run time linking or normal -- # AIX style linking. If -brtl is somewhere in LDFLAGS, we -- # need to do runtime linking. -- case $host_os in aix4.[23]|aix4.[23].*|aix5*) -- for ld_flag in $LDFLAGS; do -- case $ld_flag in -- *-brtl*) ++ ++ cygwin* | mingw* | pw32* | cegcc*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ interix[[3-9]]*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) ++ tmp_diet=no ++ if test "$host_os" = linux-dietlibc; then ++ case $cc_basename in ++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) ++ esac ++ fi ++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ ++ && test "$tmp_diet" = no ++ then ++ tmp_addflag= ++ tmp_sharedflag='-shared' ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ lf95*) # Lahey Fortran 8.1 ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ tmp_sharedflag='--shared' ;; ++ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) ++ tmp_sharedflag='-qmkshrobj' ++ tmp_addflag= ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ _LT_TAGVAR(compiler_needs_object, $1)=yes ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ esac ++ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ++ case $cc_basename in ++ xlf*) ++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ esac ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ++ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then ++ runpath_var= ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ fi ++ ;; ++ ++ aix[[4-9]]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. -+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break -- ;; -- esac -- done -- esac ++ aix_use_runtimelinking=yes ++ break + fi + done + ;; + esac - -- exp_sym_flag='-bexport' -- no_entry_flag='-bnoentry' -- fi ++ + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi - -- # When large executables or shared objects are built, AIX ld can -- # have problems creating the table of contents. If linking a library -- # or program results in "error TOC overflow" add -mminimal-toc to -- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not -- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -- -- archive_cmds_CXX='' -- hardcode_direct_CXX=yes -- hardcode_libdir_separator_CXX=':' -- link_all_deplibs_CXX=yes ++ + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - -- if test "$GXX" = yes; then -- case $host_os in aix4.012|aix4.012.*) -- # We only want to do this on AIX 4.2 and lower, the check -- # below for broken collect2 doesn't work under 4.3+ -- collect2name=`${CC} -print-prog-name=collect2` -- if test -f "$collect2name" && \ -- strings "$collect2name" | grep resolve_lib_name >/dev/null -- then -+ archive_cmds='' -+ hardcode_direct=yes -+ hardcode_direct_absolute=yes -+ hardcode_libdir_separator=':' -+ link_all_deplibs=yes -+ file_list_spec='${wl}-f,' ++ ++ _LT_TAGVAR(archive_cmds, $1)='' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GCC" = yes; then -+ case $host_os in aix4.[012]|aix4.[012].*) ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then - # We have reworked collect2 -- hardcode_direct_CXX=yes -- else ++ # We have reworked collect2 + : + else - # We have old collect2 -- hardcode_direct_CXX=unsupported -+ hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking -- hardcode_minus_L_CXX=yes -- hardcode_libdir_flag_spec_CXX='-L$libdir' -- hardcode_libdir_separator_CXX= -+ hardcode_minus_L=yes -+ hardcode_libdir_flag_spec='-L$libdir' -+ hardcode_libdir_separator= -+ fi -+ ;; -+ esac -+ shared_flag='-shared' -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag="$shared_flag "'${wl}-G' - fi -- esac -- shared_flag='-shared' -- else -- # not using gcc -- if test "$host_cpu" = ia64; then -+ link_all_deplibs=no -+ else -+ # not using gcc -+ if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: -- shared_flag='-G' -- else -- if test "$aix_use_runtimelinking" = yes; then -- shared_flag='${wl}-G' -+ shared_flag='-G' - else -- shared_flag='${wl}-bM:SRE' -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag='${wl}-G' -+ else -+ shared_flag='${wl}-bM:SRE' -+ fi - fi - fi -- fi - -- # It seems that -bexpall does not export symbols beginning with -- # underscore (_), so it is better to generate a list of symbols to export. -- always_export_symbols_CXX=yes -- if test "$aix_use_runtimelinking" = yes; then -- # Warning - without using the other runtime loading flags (-brtl), -- # -berok will link without error, but may produce a broken library. -- allow_undefined_flag_CXX='-berok' -- # Determine the default libpath from the value encoded in an empty executable. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ export_dynamic_flag_spec='${wl}-bexpall' -+ # It seems that -bexpall does not export symbols beginning with -+ # underscore (_), so it is better to generate a list of symbols to export. -+ always_export_symbols=yes -+ if test "$aix_use_runtimelinking" = yes; then -+ # Warning - without using the other runtime loading flags (-brtl), -+ # -berok will link without error, but may produce a broken library. -+ allow_undefined_flag='-berok' -+ # Determine the default libpath from the value encoded in an -+ # empty executable. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -9925,58 +9406,36 @@ main () - return 0; - } - _ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+if ac_fn_c_try_link "$LINENO"; then : - --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'` -+lt_aix_libpath_sed=' -+ /Import File Strings/,/^$/ { -+ /^0/ { -+ s/^0 *$.*$$/\1/ -+ p -+ } -+ }' -+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'`; fi --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- -+if test -z "$aix_libpath"; then -+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+fi - fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext - if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - -- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" -- -- archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" -- else -- if test "$host_cpu" = ia64; then -- hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' -- allow_undefined_flag_CXX="-z nodefs" -- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" -+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" -+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else -- # Determine the default libpath from the value encoded in an empty executable. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ if test "$host_cpu" = ia64; then -+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' -+ allow_undefined_flag="-z nodefs" -+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" -+ else -+ # Determine the default libpath from the value encoded in an -+ # empty executable. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - - int -@@ -9987,9085 +9446,5350 @@ main () - return 0; - } - _ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+if ac_fn_c_try_link "$LINENO"; then : - --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'` -+lt_aix_libpath_sed=' -+ /Import File Strings/,/^$/ { -+ /^0/ { -+ s/^0 *$.*$$/\1/ -+ p -+ } -+ }' -+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'`; fi --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- -+if test -z "$aix_libpath"; then -+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext - if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - -- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" -- # Warning - without using the other run time loading flags, -- # -berok will link without error, but may produce a broken library. -- no_undefined_flag_CXX=' ${wl}-bernotok' -- allow_undefined_flag_CXX=' ${wl}-berok' -- # -bexpall does not export symbols beginning with underscore (_) -- always_export_symbols_CXX=yes -- # Exported symbols can be pulled into shared objects from archives -- whole_archive_flag_spec_CXX=' ' -- archive_cmds_need_lc_CXX=yes -- # This is similar to how AIX traditionally builds it's shared libraries. -- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # We have old collect2 ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. -+ no_undefined_flag=' ${wl}-bernotok' -+ allow_undefined_flag=' ${wl}-berok' ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives -+ whole_archive_flag_spec='$convenience' -+ archive_cmds_need_lc=yes ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. -+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi - fi -- fi -- ;; -- chorus*) -- case $cc_basename in -- *) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- esac -- ;; ++ fi + ;; - -- cygwin* | mingw* | pw32*) -- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, -- # as there is no search path for DLLs. -- hardcode_libdir_flag_spec_CXX='-L$libdir' -- allow_undefined_flag_CXX=unsupported -- always_export_symbols_CXX=no -- enable_shared_with_static_runtimes_CXX=yes -- -- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then -- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- # If the export-symbols file already is a .def file (1st line -- # is EXPORTS), use it as is; otherwise, prepend... -- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -- cp $export_symbols $output_objdir/$soname.def; -- else -- echo EXPORTS > $output_objdir/$soname.def; -- cat $export_symbols >> $output_objdir/$soname.def; -- fi~ -- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- else -- ld_shlibs_CXX=no -- fi -- ;; ++ + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support -+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds='' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) -+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -+ hardcode_libdir_flag_spec='-L$libdir' -+ hardcode_minus_L=yes ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; - -- darwin* | rhapsody*) -- if test "$GXX" = yes; then -- archive_cmds_need_lc_CXX=no -- case "$host_os" in -- rhapsody* | darwin1.[012]) -- allow_undefined_flag_CXX='-undefined suppress' -+ bsdi[45]*) -+ export_dynamic_flag_spec=-rdynamic - ;; -- *) # Darwin 1.3 on -- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then -- allow_undefined_flag_CXX='-flat_namespace -undefined suppress' -- else -- case ${MACOSX_DEPLOYMENT_TARGET} in -- 10.[012]) -- allow_undefined_flag_CXX='-flat_namespace -undefined suppress' -- ;; -- 10.*) -- allow_undefined_flag_CXX='-undefined dynamic_lookup' -- ;; -- esac -- fi ++ ++ bsdi[[45]]*) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ++ ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. -+ hardcode_libdir_flag_spec=' ' -+ allow_undefined_flag=unsupported ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. -+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. -+ old_archive_from_new_cmds='true' ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. -+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' -+ fix_srcfile_path='`cygpath -w "$srcfile"`' -+ enable_shared_with_static_runtimes=yes - ;; -- esac -- lt_int_apple_cc_single_mod=no -- output_verbose_link_cmd='echo' -- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then -- lt_int_apple_cc_single_mod=yes -- fi -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' -- else -- archive_cmds_CXX='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' -- fi -- module_cmds_CXX='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - -- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- else -- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- fi -- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- hardcode_direct_CXX=no -- hardcode_automatic_CXX=yes -- hardcode_shlibpath_var_CXX=unsupported -- whole_archive_flag_spec_CXX='-all_load $convenience' -- link_all_deplibs_CXX=yes -+ darwin* | rhapsody*) -+ -+ -+ archive_cmds_need_lc=no -+ hardcode_direct=no -+ hardcode_automatic=yes -+ hardcode_shlibpath_var=unsupported -+ whole_archive_flag_spec='' -+ link_all_deplibs=yes -+ allow_undefined_flag="$_lt_dar_allow_undefined" -+ case $cc_basename in -+ ifort*) _lt_dar_can_shared=yes ;; -+ *) _lt_dar_can_shared=$GCC ;; -+ esac -+ if test "$_lt_dar_can_shared" = "yes"; then -+ output_verbose_link_cmd=echo -+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" -+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" -+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" -+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ;; + - else -- ld_shlibs_CXX=no -+ ld_shlibs=no - fi -- ;; - -- dgux*) -- case $cc_basename in -- ec++) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- ghcx) -- # Green Hills C++ Compiler -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- *) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- esac -- ;; -- freebsd12*) -- # C++ shared libraries reported to be fairly broken before switch to ELF -- ld_shlibs_CXX=no -- ;; -- freebsd-elf*) -- archive_cmds_need_lc_CXX=no -- ;; -- freebsd* | kfreebsd*-gnu) -- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF -- # conventions -- ld_shlibs_CXX=yes -- ;; -- gnu*) -- ;; -- hpux9*) -- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' -- hardcode_libdir_separator_CXX=: -- export_dynamic_flag_spec_CXX='${wl}-E' -- hardcode_direct_CXX=yes -- hardcode_minus_L_CXX=yes # Not in the search PATH, -- # but as the default -- # location of the library. -- -- case $cc_basename in -- CC) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no - ;; -- aCC) -- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ darwin* | rhapsody*) ++ _LT_DARWIN_LINKER_FEATURES($1) ++ ;; + + dgux*) -+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ hardcode_libdir_flag_spec='-L$libdir' -+ hardcode_shlibpath_var=no - ;; -- *) -- if test "$GXX" = yes; then -- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -- else -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- fi ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + + freebsd1*) -+ ld_shlibs=no - ;; -- esac -- ;; -- hpux10*|hpux11*) -- if test $with_gnu_ld = no; then -- case "$host_cpu" in -- hppa*64*) -- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' -- hardcode_libdir_flag_spec_ld_CXX='+b $libdir' -- hardcode_libdir_separator_CXX=: -- ;; -- ia64*) -- hardcode_libdir_flag_spec_CXX='-L$libdir' -- ;; -- *) -- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' -- hardcode_libdir_separator_CXX=: -- export_dynamic_flag_spec_CXX='${wl}-E' -- ;; -- esac -- fi -- case "$host_cpu" in -- hppa*64*) -- hardcode_direct_CXX=no -- hardcode_shlibpath_var_CXX=no ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) -+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' -+ hardcode_libdir_flag_spec='-R$libdir' -+ hardcode_direct=yes -+ hardcode_shlibpath_var=no - ;; -- ia64*) -- hardcode_direct_CXX=no -- hardcode_shlibpath_var_CXX=no -- hardcode_minus_L_CXX=yes # Not in the search PATH, -- # but as the default -- # location of the library. ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) -+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -+ hardcode_direct=yes -+ hardcode_minus_L=yes -+ hardcode_shlibpath_var=no - ;; -- *) -- hardcode_direct_CXX=yes -- hardcode_minus_L_CXX=yes # Not in the search PATH, -- # but as the default -- # location of the library. ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) -+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' -+ hardcode_libdir_flag_spec='-R$libdir' -+ hardcode_direct=yes -+ hardcode_shlibpath_var=no - ;; -- esac - -- case $cc_basename in -- CC) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- aCC) -- case "$host_cpu" in -- hppa*64*|ia64*) -- archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ + hpux9*) + if test "$GCC" = yes; then -+ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else -+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi -+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' -+ hardcode_libdir_separator=: -+ hardcode_direct=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. -+ hardcode_minus_L=yes -+ export_dynamic_flag_spec='${wl}-E' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then -+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else -+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then -+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' -+ hardcode_libdir_flag_spec_ld='+b $libdir' -+ hardcode_libdir_separator=: -+ hardcode_direct=yes -+ hardcode_direct_absolute=yes -+ export_dynamic_flag_spec='${wl}-E' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. -+ hardcode_minus_L=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + @@ -47742,626 +10559,270 @@ + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) -+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) -+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) -- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- ;; -- *) -- if test "$GXX" = yes; then -- if test $with_gnu_ld = no; then -- case "$host_cpu" in -- ia64*|hppa*64*) -- archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' -- ;; -- *) -- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -- ;; -- esac -- fi -- else -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- fi -- ;; -- esac -- ;; -- irix5* | irix6*) -- case $cc_basename in -- CC) -- # SGI C++ -- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' -- -- # Archives containing C++ object files must be created using -- # "CC -ar", where "CC" is the IRIX C++ compiler. This is -- # necessary to make sure instantiated templates are included -- # in the archive. -- old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' -- ;; -- *) -- if test "$GXX" = yes; then -- if test "$with_gnu_ld" = no; then -- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' -- else -- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' -- fi -- fi -- link_all_deplibs_CXX=yes -- ;; -- esac -- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator_CXX=: -- ;; -- linux*) -- case $cc_basename in -- KCC) -- # Kuck and Associates, Inc. (KAI) C++ Compiler -- -- # KCC will only create a shared library if the output file -- # ends with ".so" (or ".sl" for HP-UX), so rename the library -- # to its proper name (with version) after linking. -- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' -- archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- -- hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' -- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -- -- # Archives containing C++ object files must be created using -- # "CC -Bstatic", where "CC" is the KAI C++ compiler. -- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' -- ;; -- icpc) -- # Intel C++ -- with_gnu_ld=yes -- archive_cmds_need_lc_CXX=no -- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' -- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -- whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' -- ;; -- cxx) -- # Compaq C++ -- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac + else + case $host_cpu in + hppa*64*) -+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) -+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) -+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac -+ fi -+ if test "$with_gnu_ld" = no; then -+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' -+ hardcode_libdir_separator=: - -- runpath_var=LD_RUN_PATH -- hardcode_libdir_flag_spec_CXX='-rpath $libdir' -- hardcode_libdir_separator_CXX=: ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ + case $host_cpu in + hppa*64*|ia64*) -+ hardcode_direct=no -+ hardcode_shlibpath_var=no ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) -+ hardcode_direct=yes -+ hardcode_direct_absolute=yes -+ export_dynamic_flag_spec='${wl}-E' - -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- ;; -- esac -- ;; -- lynxos*) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- m88k*) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- mvs*) -- case $cc_basename in -- cxx) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- *) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- esac -- ;; -- netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' -- wlarc= -- hardcode_libdir_flag_spec_CXX='-R$libdir' -- hardcode_direct_CXX=yes -- hardcode_shlibpath_var_CXX=no -- fi -- # Workaround some broken pre-1.5 toolchains -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' -- ;; -- osf3*) -- case $cc_basename in -- KCC) -- # Kuck and Associates, Inc. (KAI) C++ Compiler -- -- # KCC will only create a shared library if the output file -- # ends with ".so" (or ".sl" for HP-UX), so rename the library -- # to its proper name (with version) after linking. -- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. -+ hardcode_minus_L=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; - -- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' -- hardcode_libdir_separator_CXX=: ++ + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then -+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+int foo(void) {} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - -- # Archives containing C++ object files must be created using -- # "CC -Bstatic", where "CC" is the KAI C++ compiler. -- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext ++ AC_LINK_IFELSE(int foo(void) {}, ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ ) + LDFLAGS="$save_LDFLAGS" + else -+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi -+ archive_cmds_need_lc='no' -+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -+ hardcode_libdir_separator=: -+ inherit_rpath=yes -+ link_all_deplibs=yes ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(inherit_rpath, $1)=yes ++ _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; - -- ;; -- RCC) -- # Rational C++ 2.4.1 -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- cxx) -- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' -- -- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator_CXX=: -- -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- ;; -- *) -- if test "$GXX" = yes && test "$with_gnu_ld" = no; then -- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else -+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi -+ hardcode_libdir_flag_spec='-R$libdir' -+ hardcode_direct=yes -+ hardcode_shlibpath_var=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; - -- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator_CXX=: ++ + newsos6) -+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ hardcode_direct=yes -+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -+ hardcode_libdir_separator=: -+ hardcode_shlibpath_var=no ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; - -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ + *nto* | *qnx*) + ;; - ++ + openbsd*) + if test -f /usr/libexec/ld.so; then -+ hardcode_direct=yes -+ hardcode_shlibpath_var=no -+ hardcode_direct_absolute=yes ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' -+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' -+ export_dynamic_flag_spec='${wl}-E' - else -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ else + case $host_os in -+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) -+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -+ hardcode_libdir_flag_spec='-R$libdir' ++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) -+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac - fi -- ;; -- esac -- ;; -- osf4* | osf5*) -- case $cc_basename in -- KCC) -- # Kuck and Associates, Inc. (KAI) C++ Compiler -- -- # KCC will only create a shared library if the output file -- # ends with ".so" (or ".sl" for HP-UX), so rename the library -- # to its proper name (with version) after linking. -- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ fi + else -+ ld_shlibs=no ++ _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; - -- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' -- hardcode_libdir_separator_CXX=: ++ + os2*) -+ hardcode_libdir_flag_spec='-L$libdir' -+ hardcode_minus_L=yes -+ allow_undefined_flag=unsupported -+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' -+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; - -- # Archives containing C++ object files must be created using -- # the KAI C++ compiler. -- old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' -- ;; -- RCC) -- # Rational C++ 2.4.1 -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- cxx) -- allow_undefined_flag_CXX=' -expect_unresolved \*' -- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' -- archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ -- echo "-hidden">> $lib.exp~ -- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ -- $rm $lib.exp' -- -- hardcode_libdir_flag_spec_CXX='-rpath $libdir' -- hardcode_libdir_separator_CXX=: -- -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- ;; -- *) -- if test "$GXX" = yes && test "$with_gnu_ld" = no; then -- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ + osf3*) + if test "$GCC" = yes; then -+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' -+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else -+ allow_undefined_flag=' -expect_unresolved \*' -+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + fi -+ archive_cmds_need_lc='no' -+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -+ hardcode_libdir_separator=: ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; - -- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator_CXX=: ++ + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then -+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' -+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else -+ allow_undefined_flag=' -expect_unresolved \*' -+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ + # Both c and cxx compiler support -rpath directly -+ hardcode_libdir_flag_spec='-rpath $libdir' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi -+ archive_cmds_need_lc='no' -+ hardcode_libdir_separator=: ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; - ++ + solaris*) -+ no_undefined_flag=' -z defs' ++ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' -+ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' -+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' -+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' -+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi -+ hardcode_libdir_flag_spec='-R$libdir' -+ hardcode_shlibpath_var=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in -+ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then -+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; -- esac -- ;; -- psos*) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- sco*) -- archive_cmds_need_lc_CXX=no -- case $cc_basename in -- CC) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- *) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- esac -- ;; -- sunos4*) -- case $cc_basename in -- CC) -- # Sun C++ 4.x -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- lcc) -- # Lucid -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ fi ++ ;; + esac -+ link_all_deplibs=yes ++ _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. -+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else -+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi -+ hardcode_libdir_flag_spec='-L$libdir' -+ hardcode_direct=yes -+ hardcode_minus_L=yes -+ hardcode_shlibpath_var=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) -+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ hardcode_direct=yes # is this really true??? - ;; -- *) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ++ ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. -+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' -+ reload_cmds='$CC -r -o $output$reload_objs' -+ hardcode_direct=no ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' ++ _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) -+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; -- esac -- ;; -- solaris*) -- case $cc_basename in -- CC) -- # Sun C++ 4.2, 5.x and Centerline C++ -- no_undefined_flag_CXX=' -zdefs' -- archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ++ ;; + esac + runpath_var='LD_RUN_PATH' -+ hardcode_shlibpath_var=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; - -- hardcode_libdir_flag_spec_CXX='-R$libdir' -- hardcode_shlibpath_var_CXX=no -- case $host_os in -- solaris2.0-5 | solaris2.0-5.*) ;; -- *) -- # The C++ compiler is used as linker so we must use $wl -- # flag to pass the commands to the underlying system -- # linker. -- # Supported since Solaris 2.6 (maybe 2.5.1?) -- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' -- ;; -- esac -- link_all_deplibs_CXX=yes ++ + sysv4.3*) -+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ hardcode_shlibpath_var=no -+ export_dynamic_flag_spec='-Bexport' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; - -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- # -- # There doesn't appear to be a way to prevent this compiler from -- # explicitly linking system object files so we need to strip them -- # from the output so that they don't get included in the library -- # dependencies. -- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' -- -- # Archives containing C++ object files must be created using -- # "CC -xar", where "CC" is the Sun C++ compiler. This is -- # necessary to make sure instantiated templates are included -- # in the archive. -- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' -- ;; -- gcx) -- # Green Hills C++ Compiler -- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ + sysv4*MP*) + if test -d /usr/nec; then -+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ hardcode_shlibpath_var=no ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes -+ ld_shlibs=yes ++ _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; - -- # The C++ compiler must be used to create the archive. -- old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' -- ;; -- *) -- # GNU C++ compiler with Solaris linker -- if test "$GXX" = yes && test "$with_gnu_ld" = no; then -- no_undefined_flag_CXX=' ${wl}-z ${wl}defs' -- if $CC --version | grep -v '^2\.7' > /dev/null; then -- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' -+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) -+ no_undefined_flag='${wl}-z,text' -+ archive_cmds_need_lc=no -+ hardcode_shlibpath_var=no ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' - -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" -- else -- # g++ 2.7 appears to require `-G' NOT `-shared' on this -- # platform. -- archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ + if test "$GCC" = yes; then -+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else -+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ fi -+ ;; - -- # Commands to make compiler produce verbose output that lists -- # what "hidden" libraries, object files and flags are used when -- # linking a shared library. -- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" -- fi ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to @@ -48369,14865 +10830,22491 @@ + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. -+ no_undefined_flag='${wl}-z,text' -+ allow_undefined_flag='${wl}-z,nodefs' -+ archive_cmds_need_lc=no -+ hardcode_shlibpath_var=no -+ hardcode_libdir_flag_spec='${wl}-R,$libdir' -+ hardcode_libdir_separator=':' -+ link_all_deplibs=yes -+ export_dynamic_flag_spec='${wl}-Bexport' ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' - -- hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' -- fi -- ;; ++ + if test "$GCC" = yes; then -+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else -+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) -+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ hardcode_libdir_flag_spec='-L$libdir' -+ hardcode_shlibpath_var=no ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) -+ ld_shlibs=no ++ _LT_TAGVAR(ld_shlibs, $1)=no + ;; - esac -- ;; -- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) -- archive_cmds_need_lc_CXX=no -- ;; -- tandem*) -- case $cc_basename in -- NCC) -- # NonStop-UX NCC 3.20 -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- *) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no ++ esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -+ export_dynamic_flag_spec='${wl}-Blargedynsym' - ;; -- esac -- ;; -- vxworks*) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; -- *) -- # FIXME: insert proper C++ library support -- ld_shlibs_CXX=no -- ;; --esac --echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 --echo "${ECHO_T}$ld_shlibs_CXX" >&6 --test "$ld_shlibs_CXX" = no && can_build_shared=no ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ++ ;; + esac + fi + fi ++]) ++AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) ++test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++ ++_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld ++ ++_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl ++_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl ++_LT_DECL([], [extract_expsyms_cmds], [2], ++ [The commands to extract the exported symbol list from a shared archive]) ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in ++x|xyes) ++ # Assume -lc should be added ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $_LT_TAGVAR(archive_cmds, $1) in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ AC_MSG_CHECKING([whether -lc should be explicitly linked in]) ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) ++ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) ++ _LT_TAGVAR(allow_undefined_flag, $1)= ++ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) ++ then ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ else ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ fi ++ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $RM conftest* ++ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], ++ [Whether or not to add -lc for building shared libraries]) ++_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], ++ [enable_shared_with_static_runtimes], [0], ++ [Whether or not to disallow shared libs when runtime libs are static]) ++_LT_TAGDECL([], [export_dynamic_flag_spec], [1], ++ [Compiler flag to allow reflexive dlopens]) ++_LT_TAGDECL([], [whole_archive_flag_spec], [1], ++ [Compiler flag to generate shared objects directly from archives]) ++_LT_TAGDECL([], [compiler_needs_object], [1], ++ [Whether the compiler copes with passing no objects directly]) ++_LT_TAGDECL([], [old_archive_from_new_cmds], [2], ++ [Create an old-style archive from a shared archive]) ++_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], ++ [Create a temporary old-style archive to link instead of a shared archive]) ++_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) ++_LT_TAGDECL([], [archive_expsym_cmds], [2]) ++_LT_TAGDECL([], [module_cmds], [2], ++ [Commands used to build a loadable module if different from building ++ a shared archive.]) ++_LT_TAGDECL([], [module_expsym_cmds], [2]) ++_LT_TAGDECL([], [with_gnu_ld], [1], ++ [Whether we are building with GNU ld or not]) ++_LT_TAGDECL([], [allow_undefined_flag], [1], ++ [Flag that allows shared libraries with undefined symbols to be built]) ++_LT_TAGDECL([], [no_undefined_flag], [1], ++ [Flag that enforces no undefined symbols]) ++_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], ++ [Flag to hardcode $libdir into a binary during linking. ++ This must work even if $libdir does not exist]) ++_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], ++ [[If ld is used when linking, flag to hardcode $libdir into a binary ++ during linking. This must work even if $libdir does not exist]]) ++_LT_TAGDECL([], [hardcode_libdir_separator], [1], ++ [Whether we need a single "-rpath" flag with a separated argument]) ++_LT_TAGDECL([], [hardcode_direct], [0], ++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes ++ DIR into the resulting binary]) ++_LT_TAGDECL([], [hardcode_direct_absolute], [0], ++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes ++ DIR into the resulting binary and the resulting library dependency is ++ "absolute", i.e impossible to change by setting ${shlibpath_var} if the ++ library is relocated]) ++_LT_TAGDECL([], [hardcode_minus_L], [0], ++ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++ into the resulting binary]) ++_LT_TAGDECL([], [hardcode_shlibpath_var], [0], ++ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++ into the resulting binary]) ++_LT_TAGDECL([], [hardcode_automatic], [0], ++ [Set to "yes" if building a shared library automatically hardcodes DIR ++ into the library and all subsequent libraries and executables linked ++ against it]) ++_LT_TAGDECL([], [inherit_rpath], [0], ++ [Set to yes if linker adds runtime paths of dependent libraries ++ to runtime path list]) ++_LT_TAGDECL([], [link_all_deplibs], [0], ++ [Whether libtool must link a program against all its dependency libraries]) ++_LT_TAGDECL([], [fix_srcfile_path], [1], ++ [Fix the shell variable $srcfile for the compiler]) ++_LT_TAGDECL([], [always_export_symbols], [0], ++ [Set to "yes" if exported symbols are required]) ++_LT_TAGDECL([], [export_symbols_cmds], [2], ++ [The commands to list exported symbols]) ++_LT_TAGDECL([], [exclude_expsyms], [1], ++ [Symbols that should not be listed in the preloaded symbols]) ++_LT_TAGDECL([], [include_expsyms], [1], ++ [Symbols that must always be exported]) ++_LT_TAGDECL([], [prelink_cmds], [2], ++ [Commands necessary for linking programs (against libraries) with templates]) ++_LT_TAGDECL([], [file_list_spec], [1], ++ [Specify filename containing input files]) ++dnl FIXME: Not yet implemented ++dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], ++dnl [Compiler flag to generate thread safe objects]) ++])# _LT_LINKER_SHLIBS ++ ++ ++# _LT_LANG_C_CONFIG([TAG]) ++# ------------------------ ++# Ensure that the configuration variables for a C compiler are suitably ++# defined. These variables are subsequently used by _LT_CONFIG to write ++# the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_C_CONFIG], ++[m4_require([_LT_DECL_EGREP])dnl + lt_save_CC="$CC" +-CC=${RC-"windres"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC +-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++AC_LANG_PUSH(C) ++ ++# Source file extension for C test sources. ++ac_ext=c ++ ++# Object file extension for compiled C test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext --GCC_CXX="$GXX" --LD_CXX="$LD" -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -+$as_echo "$ld_shlibs" >&6; } -+test "$ld_shlibs" = no && can_build_shared=no - -+with_gnu_ld=$with_gnu_ld - --cat > conftest.$ac_ext <&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- # Parse the compiler output and extract the necessary -- # objects, libraries and library flags. - -- # Sentinel used to keep track of whether or not we are before -- # the conftest object file. -- pre_test_object_deps_done=no +-AC_LIBTOOL_CONFIG($1) ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" -- # The `*' in the case matches for architectures that use `case' in -- # $output_verbose_cmd can trigger glob expansion during the loop -- # eval without this substitution. -- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" +-AC_LANG_RESTORE +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_RC_CONFIG ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' -- for p in `eval $output_verbose_link_cmd`; do -- case $p in ++_LT_TAG_COMPILER ++# Save the default compiler, since it gets overwritten when the other ++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. ++compiler_DEFAULT=$CC ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ ++if test -n "$compiler"; then ++ _LT_COMPILER_NO_RTTI($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ LT_SYS_DLOPEN_SELF ++ _LT_CMD_STRIPLIB ++ ++ # Report which library types will actually be built ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) -- -L* | -R* | -l*) -- # Some compilers place space between "-{L,R}" and the path. -- # Remove the space. -- if test $p = "-L" \ -- || test $p = "-R"; then -- prev=$p -- continue -- else -- prev= -- fi +-# AC_LIBTOOL_CONFIG([TAGNAME]) +-# ---------------------------- +-# If TAGNAME is not passed, then create an initial libtool script +-# with a default configuration from the untagged config vars. Otherwise +-# add code to config.status for appending the configuration named by +-# TAGNAME from the matching tagged config vars. +-AC_DEFUN([AC_LIBTOOL_CONFIG], +-[# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- _LT_AC_TAGVAR(compiler, $1) \ +- _LT_AC_TAGVAR(CC, $1) \ +- _LT_AC_TAGVAR(LD, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ +- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ +- _LT_AC_TAGVAR(old_archive_cmds, $1) \ +- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ +- _LT_AC_TAGVAR(predep_objects, $1) \ +- _LT_AC_TAGVAR(postdep_objects, $1) \ +- _LT_AC_TAGVAR(predeps, $1) \ +- _LT_AC_TAGVAR(postdeps, $1) \ +- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ +- _LT_AC_TAGVAR(archive_cmds, $1) \ +- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ +- _LT_AC_TAGVAR(postinstall_cmds, $1) \ +- _LT_AC_TAGVAR(postuninstall_cmds, $1) \ +- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ +- _LT_AC_TAGVAR(allow_undefined_flag, $1) \ +- _LT_AC_TAGVAR(no_undefined_flag, $1) \ +- _LT_AC_TAGVAR(export_symbols_cmds, $1) \ +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ +- _LT_AC_TAGVAR(hardcode_automatic, $1) \ +- _LT_AC_TAGVAR(module_cmds, $1) \ +- _LT_AC_TAGVAR(module_expsym_cmds, $1) \ +- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ +- _LT_AC_TAGVAR(exclude_expsyms, $1) \ +- _LT_AC_TAGVAR(include_expsyms, $1); do +- +- case $var in +- _LT_AC_TAGVAR(old_archive_cmds, $1) | \ +- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ +- _LT_AC_TAGVAR(archive_cmds, $1) | \ +- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ +- _LT_AC_TAGVAR(module_cmds, $1) | \ +- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ +- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ +- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; -- if test "$pre_test_object_deps_done" = no; then -- case $p in -- -L* | -R*) -- # Internal compiler library paths should come after those -- # provided the user. The postdeps already come after the -- # user supplied libs so there is no need to process them. -- if test -z "$compiler_lib_search_path_CXX"; then -- compiler_lib_search_path_CXX="${prev}${p}" -- else -- compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" -- fi -- ;; -- # The "-l" case would never come before the object being -- # linked, so don't bother handling this case. -- esac -- else -- if test -z "$postdeps_CXX"; then -- postdeps_CXX="${prev}${p}" -- else -- postdeps_CXX="${postdeps_CXX} ${prev}${p}" -- fi -- fi -- ;; +- case $lt_echo in +- *'\[$]0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi + ;; + esac ++ AC_MSG_RESULT([$enable_shared]) -- *.$objext) -- # This assumes that the test object file only shows up -- # once in the compiler output. -- if test "$p" = "conftest.$objext"; then -- pre_test_object_deps_done=yes -- continue -- fi +-ifelse([$1], [], +- [cfgfile="${ofile}T" +- trap "$rm \"$cfgfile\"; exit 1" 1 2 15 +- $rm -f "$cfgfile" +- AC_MSG_NOTICE([creating $ofile])], +- [cfgfile="$ofile"]) ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) -- if test "$pre_test_object_deps_done" = no; then -- if test -z "$predep_objects_CXX"; then -- predep_objects_CXX="$p" -- else -- predep_objects_CXX="$predep_objects_CXX $p" -- fi -- else -- if test -z "$postdep_objects_CXX"; then -- postdep_objects_CXX="$p" -- else -- postdep_objects_CXX="$postdep_objects_CXX $p" -- fi -- fi -- ;; +- cat <<__EOF__ >> "$cfgfile" +-ifelse([$1], [], +-[#! $SHELL ++ _LT_CONFIG($1) ++fi ++AC_LANG_POP ++CC="$lt_save_CC" ++])# _LT_LANG_C_CONFIG -- *) ;; # Ignore the rest. +-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +-# NOTE: Changes made to this file will be lost: look at ltmain.sh. +-# +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +-# Free Software Foundation, Inc. +-# +-# This file is part of GNU Libtool: +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. -- esac -- done +-# A sed program that does not truncate output. +-SED=$lt_SED ++# _LT_PROG_CXX ++# ------------ ++# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ ++# compiler, we have our own version here. ++m4_defun([_LT_PROG_CXX], ++[ ++pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) ++AC_PROG_CXX ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ AC_PROG_CXXCPP ++else ++ _lt_caught_CXX_error=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_CXX ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_CXX], []) -- # Clean up. -- rm -f a.out a.exe --else -- echo "libtool.m4: error: problem compiling CXX test program" --fi +-# Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="$SED -e s/^X//" --$rm -f confest.$objext +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++# _LT_LANG_CXX_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for a C++ compiler are suitably ++# defined. These variables are subsequently used by _LT_CONFIG to write ++# the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_CXX_CONFIG], ++[AC_REQUIRE([_LT_PROG_CXX])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_EGREP])dnl ++ ++AC_LANG_PUSH(C++) ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(compiler_needs_object, $1)=no ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no --case " $postdeps_CXX " in --*" -lc "*) archive_cmds_need_lc_CXX=no ;; --esac -- --lt_prog_compiler_wl_CXX= --lt_prog_compiler_pic_CXX= --lt_prog_compiler_static_CXX= +-# The names of the tagged configurations supported by this script. +-available_tags= ++# Source file extension for C++ test sources. ++ac_ext=cpp --echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 --echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 -- -- # C++ specific cases for pic, static, wl, etc. -- if test "$GXX" = yes; then -- lt_prog_compiler_wl_CXX='-Wl,' -- lt_prog_compiler_static_CXX='-static' -+# -+# Do we need to explicitly link libc? -+# -+case "x$archive_cmds_need_lc" in -+x|xyes) -+ # Assume -lc should be added -+ archive_cmds_need_lc=yes +-# ### BEGIN LIBTOOL CONFIG], +-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) ++# Object file extension for compiled C++ test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext -- case $host_os in -- aix*) -- # All AIX code is PIC. -- if test "$host_cpu" = ia64; then -- # AIX 5 now supports IA64 processor -- lt_prog_compiler_static_CXX='-Bstatic' -- fi -- ;; -- amigaos*) -- # FIXME: we need at least 68020 code to build shared libraries, but -- # adding the `-m68020' flag to GCC prevents building anything better, -- # like `-m68040'. -- lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' -- ;; -- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) -- # PIC is the default for these OSes. -- ;; -- mingw* | os2* | pw32*) -- # This hack is so that the source file can tell whether it is being -- # built for inclusion in a dll (and should export symbols for example). -- lt_prog_compiler_pic_CXX='-DDLL_EXPORT' -- ;; -- darwin* | rhapsody*) -- # PIC is the default on this platform -- # Common symbols not allowed in MH_DYLIB files -- lt_prog_compiler_pic_CXX='-fno-common' -- ;; -- *djgpp*) -- # DJGPP does not support shared libraries at all -- lt_prog_compiler_pic_CXX= -+ if test "$enable_shared" = yes && test "$GCC" = yes; then -+ case $archive_cmds in -+ *'~'*) -+ # FIXME: we may have to deal with multi-command sequences. - ;; -- sysv4*MP*) -- if test -d /usr/nec; then -- lt_prog_compiler_pic_CXX=-Kconform_pic -+ '$CC '*) -+ # Test whether the compiler implicitly links with -lc since on some -+ # systems, -lgcc has to come before -lc. If gcc already passes -lc -+ # to ld, don't add -lc before -lgcc. -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -+ $RM conftest* -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# No sense in running all these tests if we already determined that ++# the CXX compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_caught_CXX_error" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="int some_variable = 0;" + -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } 2>conftest.err; then -+ soname=conftest -+ lib=conftest -+ libobjs=conftest.$ac_objext -+ deplibs= -+ wl=$lt_prog_compiler_wl -+ pic_flag=$lt_prog_compiler_pic -+ compiler_flags=-v -+ linker_flags=-v -+ verstring= -+ output_objdir=. -+ libname=conftest -+ lt_save_allow_undefined_flag=$allow_undefined_flag -+ allow_undefined_flag= -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 -+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } -+ then -+ archive_cmds_need_lc=no ++ # Code to be used in simple link tests ++ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' ++ ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER ++ ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC=$CC ++ lt_save_LD=$LD ++ lt_save_GCC=$GCC ++ GCC=$GXX ++ lt_save_with_gnu_ld=$with_gnu_ld ++ lt_save_path_LD=$lt_cv_path_LD ++ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then ++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx ++ else ++ $as_unset lt_cv_prog_gnu_ld ++ fi ++ if test -n "${lt_cv_path_LDCXX+set}"; then ++ lt_cv_path_LD=$lt_cv_path_LDCXX ++ else ++ $as_unset lt_cv_path_LD ++ fi ++ test -z "${LDCXX+set}" || LD=$LDCXX ++ CC=${CXX-"c++"} ++ compiler=$CC ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ ++ if test -n "$compiler"; then ++ # We don't want -fno-exception when compiling C++ code, so set the ++ # no_builtin_flag separately ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ++ else ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++ fi ++ ++ if test "$GXX" = yes; then ++ # Set up default GNU C++ configuration ++ ++ LT_PATH_LD ++ ++ # Check if GNU C++ uses GNU ld as the underlying linker, since the ++ # archiving commands below assume that GNU ld is being used. ++ if test "$with_gnu_ld" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to ++ # investigate it a little bit more. (MM) ++ wlarc='${wl}' ++ ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if eval "`$CC -print-prog-name=ld` --help 2>&1" | ++ $GREP 'no-whole-archive' > /dev/null; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else -+ archive_cmds_need_lc=yes ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi -+ allow_undefined_flag=$lt_save_allow_undefined_flag + else -+ cat conftest.err 1>&5 - fi -+ $RM conftest* -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 -+$as_echo "$archive_cmds_need_lc" >&6; } - ;; -- hpux*) -- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -- # not for PA HP-UX. -- case "$host_cpu" in -- hppa*64*|ia64*) -- ;; -- *) -- lt_prog_compiler_pic_CXX='-fPIC' -- ;; -- esac -- ;; -- *) -- lt_prog_compiler_pic_CXX='-fPIC' -- ;; -- esac -- else -- case $host_os in -- aix4* | aix5*) -- # All AIX code is PIC. -- if test "$host_cpu" = ia64; then -- # AIX 5 now supports IA64 processor -- lt_prog_compiler_static_CXX='-Bstatic' -- else -- lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' -- fi -- ;; -- chorus*) -- case $cc_basename in -- cxch68) -- # Green Hills C++ Compiler -- # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" -- ;; -- esac -- ;; -- dgux*) -- case $cc_basename in -- ec++) -- lt_prog_compiler_pic_CXX='-KPIC' -- ;; -- ghcx) -- # Green Hills C++ Compiler -- lt_prog_compiler_pic_CXX='-pic' -- ;; -- *) -- ;; -- esac -- ;; -- freebsd* | kfreebsd*-gnu) -- # FreeBSD uses GNU C++ -- ;; -- hpux9* | hpux10* | hpux11*) -- case $cc_basename in -- CC) -- lt_prog_compiler_wl_CXX='-Wl,' -- lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" -- if test "$host_cpu" != ia64; then -- lt_prog_compiler_pic_CXX='+Z' -- fi -- ;; -- aCC) -- lt_prog_compiler_wl_CXX='-Wl,' -- lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" -- case "$host_cpu" in -- hppa*64*|ia64*) -- # +Z the default -- ;; -- *) -- lt_prog_compiler_pic_CXX='+Z' -- ;; -- esac -- ;; -- *) -- ;; -- esac -- ;; -- irix5* | irix6* | nonstopux*) -- case $cc_basename in -- CC) -- lt_prog_compiler_wl_CXX='-Wl,' -- lt_prog_compiler_static_CXX='-non_shared' -- # CC pic flag -KPIC is the default. -- ;; -- *) -- ;; -- esac -- ;; -- linux*) -- case $cc_basename in -- KCC) -- # KAI C++ Compiler -- lt_prog_compiler_wl_CXX='--backend -Wl,' -- lt_prog_compiler_pic_CXX='-fPIC' -- ;; -- icpc) -- # Intel C++ -- lt_prog_compiler_wl_CXX='-Wl,' -- lt_prog_compiler_pic_CXX='-KPIC' -- lt_prog_compiler_static_CXX='-static' -- ;; -- cxx) -- # Compaq C++ -- # Make sure the PIC flag is empty. It appears that all Alpha -- # Linux and Compaq Tru64 Unix objects are PIC. -- lt_prog_compiler_pic_CXX= -- lt_prog_compiler_static_CXX='-non_shared' -- ;; -- *) -- ;; -- esac -- ;; -- lynxos*) -- ;; -- m88k*) -- ;; -- mvs*) -- case $cc_basename in -- cxx) -- lt_prog_compiler_pic_CXX='-W c,exportall' -- ;; -- *) -- ;; -- esac -- ;; -- netbsd*) -- ;; -- osf3* | osf4* | osf5*) -- case $cc_basename in -- KCC) -- lt_prog_compiler_wl_CXX='--backend -Wl,' -- ;; -- RCC) -- # Rational C++ 2.4.1 -- lt_prog_compiler_pic_CXX='-pic' -- ;; -- cxx) -- # Digital/Compaq C++ -- lt_prog_compiler_wl_CXX='-Wl,' -- # Make sure the PIC flag is empty. It appears that all Alpha -- # Linux and Compaq Tru64 Unix objects are PIC. -- lt_prog_compiler_pic_CXX= -- lt_prog_compiler_static_CXX='-non_shared' -- ;; -- *) -- ;; -- esac -- ;; -- psos*) -- ;; -- sco*) -- case $cc_basename in -- CC) -- lt_prog_compiler_pic_CXX='-fPIC' -- ;; -- *) -- ;; -- esac -- ;; -- solaris*) -- case $cc_basename in -- CC) -- # Sun C++ 4.2, 5.x and Centerline C++ -- lt_prog_compiler_pic_CXX='-KPIC' -- lt_prog_compiler_static_CXX='-Bstatic' -- lt_prog_compiler_wl_CXX='-Qoption ld ' -- ;; -- gcx) -- # Green Hills C++ Compiler -- lt_prog_compiler_pic_CXX='-PIC' -- ;; -- *) -- ;; -- esac -- ;; -- sunos4*) -- case $cc_basename in -- CC) -- # Sun C++ 4.x -- lt_prog_compiler_pic_CXX='-pic' -- lt_prog_compiler_static_CXX='-Bstatic' -- ;; -- lcc) -- # Lucid -- lt_prog_compiler_pic_CXX='-pic' -- ;; -- *) -- ;; -- esac -- ;; -- tandem*) -- case $cc_basename in -- NCC) -- # NonStop-UX NCC 3.20 -- lt_prog_compiler_pic_CXX='-KPIC' -- ;; -- *) -- ;; -- esac -- ;; -- unixware*) -- ;; -- vxworks*) -- ;; -- *) -- lt_prog_compiler_can_build_shared_CXX=no -- ;; - esac - fi -+ ;; -+esac - --echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 --echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6 - --# --# Check to make sure the PIC flag actually works. --# --if test -n "$lt_prog_compiler_pic_CXX"; then - --echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 --echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6 --if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- lt_prog_compiler_pic_works_CXX=no -- ac_outfile=conftest.$ac_objext -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -- lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" -- # Insert the option either (1) after the last *FLAGS variable, or -- # (2) before a word containing "conftest.", or (3) at the end. -- # Note that $ac_compile itself does not contain backslashes and begins -- # with a dollar sign (not a hyphen), so the echo should work correctly. -- # The option is referenced via a variable to avoid confusing sed. -- lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -- -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:11044: $lt_compile\"" >&5) -- (eval "$lt_compile" 2>conftest.err) -- ac_status=$? -- cat conftest.err >&5 -- echo "$as_me:11048: \$? = $ac_status" >&5 -- if (exit $ac_status) && test -s "$ac_outfile"; then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s conftest.err; then -- lt_prog_compiler_pic_works_CXX=yes -- fi -- fi -- $rm conftest* ++ with_gnu_ld=no ++ wlarc= ++ ++ # A generic and very simple default shared library creation ++ # command for GNU C++ for the case where it uses the native ++ # linker, instead of GNU ld. If possible, this setting should ++ # overridden to take advantage of the native linker features on ++ # the platform it is being used on. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ fi ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ ++ else ++ GXX=no ++ with_gnu_ld=no ++ wlarc= ++ fi ++ ++ # PORTME: fill in a description of your system's C++ link characteristics ++ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ case $host_os in ++ aix3*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) ++ for ld_flag in $LDFLAGS; do ++ case $ld_flag in ++ *-brtl*) ++ aix_use_runtimelinking=yes ++ break ++ ;; ++ esac ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ _LT_TAGVAR(archive_cmds, $1)='' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' ++ ++ if test "$GXX" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to ++ # export. ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an empty ++ # executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared ++ # libraries. ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; --fi --echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 --echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6 +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL ++ chorus*) ++ case $cc_basename in ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ cygwin* | mingw* | pw32* | cegcc*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ darwin* | rhapsody*) ++ _LT_DARWIN_LINKER_FEATURES($1) ++ ;; ++ ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; --if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then -- case $lt_prog_compiler_pic_CXX in -- "" | " "*) ;; -- *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; -- esac --else -- lt_prog_compiler_pic_CXX= -- lt_prog_compiler_can_build_shared_CXX=no --fi +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared ++ freebsd[[12]]*) ++ # C++ shared libraries reported to be fairly broken before ++ # switch to ELF ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; --fi --case "$host_os" in -- # For platforms which do not support PIC, -DPIC is meaningless: -- *djgpp*) -- lt_prog_compiler_pic_CXX= -- ;; -- *) -- lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" -- ;; --esac +-# Whether or not to build static libraries. +-build_old_libs=$enable_static ++ freebsd-elf*) ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ ;; --echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 --echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 --if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- lt_cv_prog_compiler_c_o_CXX=no -- $rm -r conftest 2>/dev/null -- mkdir conftest -- cd conftest -- mkdir out -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) ++ freebsd* | dragonfly*) ++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF ++ # conventions ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ ;; -- lt_compiler_flag="-o out/conftest2.$ac_objext" -- # Insert the option either (1) after the last *FLAGS variable, or -- # (2) before a word containing "conftest.", or (3) at the end. -- # Note that $ac_compile itself does not contain backslashes and begins -- # with a dollar sign (not a hyphen), so the echo should work correctly. -- lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -- -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:11104: $lt_compile\"" >&5) -- (eval "$lt_compile" 2>out/conftest.err) -- ac_status=$? -- cat out/conftest.err >&5 -- echo "$as_me:11108: \$? = $ac_status" >&5 -- if (exit $ac_status) && test -s out/conftest2.$ac_objext -- then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s out/conftest.err; then -- lt_cv_prog_compiler_c_o_CXX=yes -- fi -- fi -- chmod u+w . -- $rm conftest* -- # SGI C++ compiler will create directory out/ii_files/ for -- # template instantiation -- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files -- $rm out/* && rmdir out -- cd .. -- rmdir conftest -- $rm conftest* +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) ++ gnu*) ++ ;; --fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6 +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install ++ hpux9*) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; +-# The host system. +-host_alias=$host_alias +-host=$host ++ hpux10*|hpux11*) ++ if test $with_gnu_ld = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ ;; ++ *) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; ++ esac ++ fi ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ;; ++ esac --hard_links="nottested" --if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then -- # do not overwrite the value of need_locks provided by the user -- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 --echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 -- hard_links=yes -- $rm conftest* -- ln conftest.a conftest.b 2>/dev/null && hard_links=no -- touch conftest.a -- ln conftest.a conftest.b 2>&5 || hard_links=no -- ln conftest.a conftest.b 2>/dev/null && hard_links=no -- echo "$as_me:$LINENO: result: $hard_links" >&5 --echo "${ECHO_T}$hard_links" >&6 -- if test "$hard_links" = no; then -- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 --echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} -- need_locks=warn -- fi --else -- need_locks=no --fi +-# An echo program that does not interpret backslashes. +-echo=$lt_echo ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test $with_gnu_ld = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ fi ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; --echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 --echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS ++ interix[[3-9]]*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ irix5* | irix6*) ++ case $cc_basename in ++ CC*) ++ # SGI C++ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' ++ fi ++ fi ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; ++ esac ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(inherit_rpath, $1)=yes ++ ;; -- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -- case $host_os in -- aix4* | aix5*) -- # If we're using GNU nm, then we don't want the "-C" option. -- # -C means demangle to AIX nm, but means don't demangle with GNU nm -- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then -- export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' -- else -- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' -- fi -- ;; -- pw32*) -- export_symbols_cmds_CXX="$ltdll_cmds" -- ;; -- cygwin* | mingw*) -- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* $[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' -- ;; -- *) -- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -- ;; -- esac +-# A C compiler. +-LTCC=$lt_LTCC ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ++ ;; ++ icpc* | ecpc* ) ++ # Intel C++ ++ with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ case `$CC -V` in ++ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) ++ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ ++ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' ++ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ ++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ ++ $RANLIB $oldlib' ++ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ *) # Version 6 will use weak symbols ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ esac --echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 --echo "${ECHO_T}$ld_shlibs_CXX" >&6 --test "$ld_shlibs_CXX" = no && can_build_shared=no +-# A language-specific compiler. +-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) ++ # Compaq C++ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' --variables_saved_for_relink="PATH $shlibpath_var $runpath_var" --if test "$GCC" = yes; then -- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" --fi +-# Is the compiler the GNU C compiler? +-with_gcc=$_LT_AC_TAGVAR(GCC, $1) ++ runpath_var=LD_RUN_PATH ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: --# --# Do we need to explicitly link libc? --# --case "x$archive_cmds_need_lc_CXX" in --x|xyes) -- # Assume -lc should be added -- archive_cmds_need_lc_CXX=yes +-# An ERE matcher. +-EGREP=$lt_EGREP ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ xl*) ++ # IBM XL 8.0 on PPC, with GNU ld ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ _LT_TAGVAR(compiler_needs_object, $1)=yes ++ ++ # Not sure whether something based on ++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 ++ # would be better. ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ esac ++ ;; ++ esac ++ ;; -- if test "$enable_shared" = yes && test "$GCC" = yes; then -- case $archive_cmds_CXX in -- *'~'*) -- # FIXME: we may have to deal with multi-command sequences. -- ;; -- '$CC '*) -- # Test whether the compiler implicitly links with -lc since on some -- # systems, -lgcc has to come before -lc. If gcc already passes -lc -- # to ld, don't add -lc before -lgcc. -- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 --echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 -- $rm conftest* -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +-# The linker used to build libraries. +-LD=$lt_[]_LT_AC_TAGVAR(LD, $1) ++ lynxos*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } 2>conftest.err; then -- soname=conftest -- lib=conftest -- libobjs=conftest.$ac_objext -- deplibs= -- wl=$lt_prog_compiler_wl_CXX -- compiler_flags=-v -- linker_flags=-v -- verstring= -- output_objdir=. -- libname=conftest -- lt_save_allow_undefined_flag=$allow_undefined_flag_CXX -- allow_undefined_flag_CXX= -- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 -- (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } -- then -- archive_cmds_need_lc_CXX=no -- else -- archive_cmds_need_lc_CXX=yes -- fi -- allow_undefined_flag_CXX=$lt_save_allow_undefined_flag -- else -- cat conftest.err 1>&5 -- fi -- $rm conftest* -- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 --echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6 -- ;; -- esac -- fi -- ;; --esac +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++ m88k*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; --echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 --echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 --library_names_spec= --libname_spec='lib$name' --soname_spec= --shrext_cmds=".so" --postinstall_cmds= --postuninstall_cmds= --finish_cmds= --finish_eval= --shlibpath_var= --shlibpath_overrides_runpath=unknown --version_type=none --dynamic_linker="$host_os ld.so" --sys_lib_dlsearch_path_spec="/lib /usr/lib" --if test "$GCC" = yes; then -- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then -- # if the path contains ";" then we assume it to be the separator -- # otherwise default to the standard path separator (i.e. ":") - it is -- # assumed that no part of a normal pathname contains ";" but that should -- # okay in the real world where ";" in dirpaths is itself problematic. -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -- else -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -- fi --else -- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" --fi --need_lib_prefix=unknown --hardcode_into_libs=no +-# A BSD-compatible nm program. +-NM=$lt_NM ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; --# when you set need_version to no, make sure it does not cause -set_version --# flags to be left without arguments --need_version=unknown +-# A symbol stripping program +-STRIP=$lt_STRIP ++ netbsd*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' ++ wlarc= ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ fi ++ # Workaround some broken pre-1.5 toolchains ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ++ ;; --case $host_os in --aix3*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' -- shlibpath_var=LIBPATH +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD ++ *nto* | *qnx*) ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ ;; -- # AIX 3 has no versioning support, so we append a major version to the name. -- soname_spec='${libname}${release}${shared_ext}$major' -- ;; +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ fi ++ output_verbose_link_cmd=echo ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; --aix4* | aix5*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- hardcode_into_libs=yes -- if test "$host_cpu" = ia64; then -- # AIX 5 supports IA64 -- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- else -- # With GCC up to 2.95.x, collect2 would create an import file -- # for dependence libraries. The import file would start with -- # the line `#! .'. This would cause the generated library to -- # depend on `.', always an invalid library. This was fixed in -- # development snapshots of GCC prior to 3.0. -- case $host_os in -- aix4 | aix4.[01] | aix4.[01].*) -- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' -- echo ' yes ' -- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then -- : -- else -- can_build_shared=no -- fi -- ;; -- esac -- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct -- # soname into executable. Probably we can add versioning support to -- # collect2, so additional links can be useful in future. -- if test "$aix_use_runtimelinking" = yes; then -- # If using run time linking (on AIX 4.2 or later) use lib.so -- # instead of lib.a to let people know that these are not -- # typical AIX shared libraries. -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- else -- # We preserve .a as extension for shared libraries through AIX4.2 -- # and later when we are not doing run time linking. -- library_names_spec='${libname}${release}.a $libname.a' -- soname_spec='${libname}${release}${shared_ext}$major' -- fi -- shlibpath_var=LIBPATH -- fi -- ;; +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Archives containing C++ object files must be created using ++ # the KAI C++ compiler. ++ case $host in ++ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; ++ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; ++ esac ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ cxx*) ++ case $host in ++ osf3*) ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ ;; ++ *) ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ ++ echo "-hidden">> $lib.exp~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ ++ $RM $lib.exp' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ ;; ++ esac --amigaos*) -- library_names_spec='$libname.ixlibrary $libname.a' -- # Create ${libname}_ixlibrary.a entries in /sys/libs. -- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' -- ;; +-# Used on cygwin: assembler. +-AS="$AS" ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: --beos*) -- library_names_spec='${libname}${shared_ext}' -- dynamic_linker="$host_os ld.so" -- shlibpath_var=LIBRARY_PATH -- ;; +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ case $host in ++ osf3*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ esac ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; --bsdi4*) -- version_type=linux -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" -- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" -- # the default ld.so.conf also contains /usr/contrib/lib and -- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow -- # libtool to hard-code these into programs -- ;; +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds ++ psos*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; --cygwin* | mingw* | pw32*) -- version_type=windows -- shrext_cmds=".dll" -- need_version=no -- need_lib_prefix=no +-# How to pass a linker flag through the compiler. +-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ lcc*) ++ # Lucid ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; -- case $GCC,$host_os in -- yes,cygwin* | yes,mingw* | yes,pw32*) -- library_names_spec='$libname.dll.a' -- # DLL is installed to $(libdir)/../bin by postinstall_cmds -- postinstall_cmds='base_file=`basename \${file}`~ -- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ -- dldir=$destdir/`dirname \$dlpath`~ -- test -d \$dldir || mkdir -p \$dldir~ -- $install_prog $dir/$dlname \$dldir/$dlname' -- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ -- dlpath=$dir/\$dldll~ -- $rm \$dlpath' -- shlibpath_overrides_runpath=yes +-# Object file suffix (normally "o"). +-objext="$ac_objext" ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes ++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ ;; ++ esac ++ _LT_TAGVAR(link_all_deplibs, $1)=yes -- case $host_os in -- cygwin*) -- # Cygwin DLLs use 'cyg' prefix rather than 'lib' -- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" -- ;; -- mingw*) -- # MinGW DLLs use traditional 'lib' prefix -- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then -- # It is most probably a Windows format PATH printed by -- # mingw gcc, but we are running on Cygwin. Gcc prints its search -- # path with ; separators, and with drive letters. We can handle the -- # drive letters (cygwin fileutils understands them), so leave them, -- # especially as we might pass files found there to a mingw objdump, -- # which wouldn't understand a cygwinified path. Ahh. -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -- else -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -- fi -- ;; -- pw32*) -- # pw32 DLLs use 'pw' prefix rather than 'lib' -- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' -- ;; -- esac -- ;; +-# Old archive suffix (normally "a"). +-libext="$libext" ++ output_verbose_link_cmd='echo' -- *) -- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' -- ;; -- esac -- dynamic_linker='Win32 ld.exe' -- # FIXME: first we should search . and the directory the executable is in -- shlibpath_var=PATH -- ;; +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' --darwin* | rhapsody*) -- dynamic_linker="$host_os dyld" -- version_type=darwin -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' -- soname_spec='${libname}${release}${major}$shared_ext' -- shlibpath_overrides_runpath=yes -- shlibpath_var=DYLD_LIBRARY_PATH -- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' -- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. -- if test "$GCC" = yes; then -- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` -- else -- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' -- fi -- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' -- ;; +-# Executable file suffix (normally ""). +-exeext="$exeext" ++ # The C++ compiler must be used to create the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ++ ;; ++ *) ++ # GNU C++ compiler with Solaris linker ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' ++ if $CC --version | $GREP -v '^2\.7' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ else ++ # g++ 2.7 appears to require `-G' NOT `-shared' on this ++ # platform. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ fi ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ ;; --dgux*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- ;; +-# Additional compiler flags for building library objects. +-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +-pic_mode=$pic_mode ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' --freebsd1*) -- dynamic_linker=no -- ;; +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; --kfreebsd*-gnu) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- dynamic_linker='GNU ld.so' -- ;; +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' --freebsd*) -- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` -- version_type=freebsd-$objformat -- case $version_type in -- freebsd-elf*) -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -- need_version=no -- need_lib_prefix=no -- ;; -- freebsd-*) -- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' -- need_version=yes -- ;; -- esac -- shlibpath_var=LD_LIBRARY_PATH -- case $host_os in -- freebsd2*) -- shlibpath_overrides_runpath=yes -- ;; -- freebsd3.01* | freebsdelf3.01*) -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -- ;; -- *) # from 3.2 on -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- ;; -- esac -- ;; +-# Must we lock files when doing compilation ? +-need_locks=$lt_need_locks ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; --gnu*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- hardcode_into_libs=yes -- ;; +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; --hpux9* | hpux10* | hpux11*) -- # Give a soname corresponding to the major version so that dld.sl refuses to -- # link against other versions. -- version_type=sunos -- need_lib_prefix=no -- need_version=no -- case "$host_cpu" in -- ia64*) -- shrext_cmds='.so' -- hardcode_into_libs=yes -- dynamic_linker="$host_os dld.so" -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- if test "X$HPUX_IA64_MODE" = X32; then -- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" -- else -- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" -- fi -- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -- ;; -- hppa*64*) -- shrext_cmds='.sl' -- hardcode_into_libs=yes -- dynamic_linker="$host_os dld.sl" -- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH -- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" -- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -- ;; -- *) -- shrext_cmds='.sl' -- dynamic_linker="$host_os dld.sl" -- shlibpath_var=SHLIB_PATH -- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- ;; -- esac -- # HP-UX runs *really* slowly unless shared libraries are mode 555. -- postinstall_cmds='chmod 555 $lib' -- ;; +-# Do we need a version for libraries? +-need_version=$need_version ++ vxworks*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; --irix5* | irix6* | nonstopux*) -- case $host_os in -- nonstopux*) version_type=nonstopux ;; -- *) -- if test "$lt_cv_prog_gnu_ld" = yes; then -- version_type=linux -- else -- version_type=irix -- fi ;; -- esac -- need_lib_prefix=no -- need_version=no -- soname_spec='${libname}${release}${shared_ext}$major' -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' -- case $host_os in -- irix5* | nonstopux*) -- libsuff= shlibsuff= -- ;; -- *) -- case $LD in # libtool.m4 will add one of these switches to LD -- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") -- libsuff= shlibsuff= libmagic=32-bit;; -- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") -- libsuff=32 shlibsuff=N32 libmagic=N32;; -- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") -- libsuff=64 shlibsuff=64 libmagic=64-bit;; -- *) libsuff= shlibsuff= libmagic=never-match;; -- esac -- ;; -- esac -- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH -- shlibpath_overrides_runpath=no -- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" -- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" -- hardcode_into_libs=yes -- ;; +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac --# No shared lib support for Linux oldld, aout, or coff. --linux*oldld* | linux*aout* | linux*coff*) -- dynamic_linker=no -- ;; +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self ++ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) ++ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no --# This must be Linux ELF. --linux*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- # This implies no fast_install, which is unacceptable. -- # Some rework will be needed to allow for fast_install -- # before this can be enabled. -- hardcode_into_libs=yes +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static ++ _LT_TAGVAR(GCC, $1)="$GXX" ++ _LT_TAGVAR(LD, $1)="$LD" -- # find out which ABI we are using -- libsuff= -- case "$host_cpu" in -- x86_64*|s390x*|powerpc64*) -- echo '#line 11615 "configure"' > conftest.$ac_ext -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- case `/usr/bin/file conftest.$ac_objext` in -- *64-bit*) -- libsuff=64 -- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" -- ;; -- esac -- fi -- rm -rf conftest* -- ;; -- esac +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_SYS_HIDDEN_LIBDEPS($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ CC=$lt_save_CC ++ LDCXX=$LD ++ LD=$lt_save_LD ++ GCC=$lt_save_GCC ++ with_gnu_ld=$lt_save_with_gnu_ld ++ lt_cv_path_LDCXX=$lt_cv_path_LD ++ lt_cv_path_LD=$lt_save_path_LD ++ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld ++ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ++fi # test "$_lt_caught_CXX_error" != yes -- # Append ld.so.conf contents to the search path -- if test -f /etc/ld.so.conf; then -- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` -- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" -- fi +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) ++AC_LANG_POP ++])# _LT_LANG_CXX_CONFIG -- # We used to test for /lib/ld.so.1 and disable shared libraries on -- # powerpc, because MkLinux only supported shared libraries with the -- # GNU dynamic linker. Since this was broken with cross compilers, -- # most powerpc-linux boxes support dynamic linking these days and -- # people can always --disable-shared, the test was removed, and we -- # assume the GNU/Linux dynamic linker is in use. -- dynamic_linker='GNU/Linux ld.so' -- ;; +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) --knetbsd*-gnu) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- dynamic_linker='GNU ld.so' -- ;; +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) ++# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) ++# --------------------------------- ++# Figure out "hidden" library dependencies from verbose ++# compiler output when linking a shared library. ++# Parse the compiler output and extract the necessary ++# objects, libraries and library flags. ++m4_defun([_LT_SYS_HIDDEN_LIBDEPS], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++# Dependencies to place before and after the object being linked: ++_LT_TAGVAR(predep_objects, $1)= ++_LT_TAGVAR(postdep_objects, $1)= ++_LT_TAGVAR(predeps, $1)= ++_LT_TAGVAR(postdeps, $1)= ++_LT_TAGVAR(compiler_lib_search_path, $1)= --netbsd*) -- version_type=sunos -- need_lib_prefix=no -- need_version=no -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -- dynamic_linker='NetBSD (a.out) ld.so' -- else -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- dynamic_linker='NetBSD ld.elf_so' -- fi -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -- ;; +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) ++dnl we can't use the lt_simple_compile_test_code here, ++dnl because it contains code intended for an executable, ++dnl not a library. It's possible we should let each ++dnl tag define a new lt_????_link_test_code variable, ++dnl but it's only used here... ++m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF ++int a; ++void foo (void) { a = 0; } ++_LT_EOF ++], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF ++class Foo ++{ ++public: ++ Foo (void) { a = 0; } ++private: ++ int a; ++}; ++_LT_EOF ++], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF ++ subroutine foo ++ implicit none ++ integer*4 a ++ a=0 ++ return ++ end ++_LT_EOF ++], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF ++ subroutine foo ++ implicit none ++ integer a ++ a=0 ++ return ++ end ++_LT_EOF ++], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF ++public class foo { ++ private int a; ++ public void bar (void) { ++ a = 0; ++ } ++}; ++_LT_EOF ++]) ++dnl Parse the compiler output and extract the necessary ++dnl objects, libraries and library flags. ++if AC_TRY_EVAL(ac_compile); then ++ # Parse the compiler output and extract the necessary ++ # objects, libraries and library flags. --newsos6) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- ;; +-# Library versioning type. +-version_type=$version_type ++ # Sentinel used to keep track of whether or not we are before ++ # the conftest object file. ++ pre_test_object_deps_done=no --nto-qnx*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- ;; +-# Format of library name prefix. +-libname_spec=$lt_libname_spec ++ for p in `eval "$output_verbose_link_cmd"`; do ++ case $p in --openbsd*) -- version_type=sunos -- need_lib_prefix=no -- need_version=yes -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -- case $host_os in -- openbsd2.[89] | openbsd2.[89].*) -- shlibpath_overrides_runpath=no -- ;; -- *) -- shlibpath_overrides_runpath=yes -- ;; -- esac -- else -- shlibpath_overrides_runpath=yes -- fi -- ;; +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++ -L* | -R* | -l*) ++ # Some compilers place space between "-{L,R}" and the path. ++ # Remove the space. ++ if test $p = "-L" || ++ test $p = "-R"; then ++ prev=$p ++ continue ++ else ++ prev= ++ fi --os2*) -- libname_spec='$name' -- shrext_cmds=".dll" -- need_lib_prefix=no -- library_names_spec='$libname${shared_ext} $libname.a' -- dynamic_linker='OS/2 ld.exe' -- shlibpath_var=LIBPATH -- ;; +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++ if test "$pre_test_object_deps_done" = no; then ++ case $p in ++ -L* | -R*) ++ # Internal compiler library paths should come after those ++ # provided the user. The postdeps already come after the ++ # user supplied libs so there is no need to process them. ++ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then ++ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" ++ else ++ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" ++ fi ++ ;; ++ # The "-l" case would never come before the object being ++ # linked, so don't bother handling this case. ++ esac ++ else ++ if test -z "$_LT_TAGVAR(postdeps, $1)"; then ++ _LT_TAGVAR(postdeps, $1)="${prev}${p}" ++ else ++ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" ++ fi ++ fi ++ ;; --osf3* | osf4* | osf5*) -- version_type=osf -- need_lib_prefix=no -- need_version=no -- soname_spec='${libname}${release}${shared_ext}$major' -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" -- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" -- ;; +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ *.$objext) ++ # This assumes that the test object file only shows up ++ # once in the compiler output. ++ if test "$p" = "conftest.$objext"; then ++ pre_test_object_deps_done=yes ++ continue ++ fi --sco3.2v5*) -- version_type=osf -- soname_spec='${libname}${release}${shared_ext}$major' -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- ;; +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) ++ if test "$pre_test_object_deps_done" = no; then ++ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then ++ _LT_TAGVAR(predep_objects, $1)="$p" ++ else ++ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" ++ fi ++ else ++ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then ++ _LT_TAGVAR(postdep_objects, $1)="$p" ++ else ++ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" ++ fi ++ fi ++ ;; --solaris*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -- # ldd complains unless libraries are executable -- postinstall_cmds='chmod +x $lib' -- ;; +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) ++ *) ;; # Ignore the rest. --sunos4*) -- version_type=sunos -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- if test "$with_gnu_ld" = yes; then -- need_lib_prefix=no -- fi -- need_version=yes -- ;; +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++ esac ++ done --sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- case $host_vendor in -- sni) -- shlibpath_overrides_runpath=no -- need_lib_prefix=no -- export_dynamic_flag_spec='${wl}-Blargedynsym' -- runpath_var=LD_RUN_PATH -- ;; -- siemens) -- need_lib_prefix=no -- ;; -- motorola) -- need_lib_prefix=no -- need_version=no -- shlibpath_overrides_runpath=no -- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' -- ;; -- esac -- ;; +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) ++ # Clean up. ++ rm -f a.out a.exe ++else ++ echo "libtool.m4: error: problem compiling $1 test program" ++fi --sysv4*MP*) -- if test -d /usr/nec ;then -- version_type=linux -- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' -- soname_spec='$libname${shared_ext}.$major' -- shlibpath_var=LD_LIBRARY_PATH -- fi -- ;; +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++$RM -f confest.$objext --uts4*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- ;; +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) ++# PORTME: override above test on systems where it is broken ++m4_if([$1], [CXX], ++[case $host_os in ++interix[[3-9]]*) ++ # Interix 3.5 installs completely hosed .la files for C++, so rather than ++ # hack all around it, let's just trust "g++" to DTRT. ++ _LT_TAGVAR(predep_objects,$1)= ++ _LT_TAGVAR(postdep_objects,$1)= ++ _LT_TAGVAR(postdeps,$1)= ++ ;; --*) -- dynamic_linker=no -- ;; --esac --echo "$as_me:$LINENO: result: $dynamic_linker" >&5 --echo "${ECHO_T}$dynamic_linker" >&6 --test "$dynamic_linker" = no && can_build_shared=no +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) ++linux*) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac --echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 --echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 --hardcode_action_CXX= --if test -n "$hardcode_libdir_flag_spec_CXX" || \ -- test -n "$runpath_var CXX" || \ -- test "X$hardcode_automatic_CXX"="Xyes" ; then +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; -- # We can hardcode non-existant directories. -- if test "$hardcode_direct_CXX" != no && -- # If the only mechanism to avoid hardcoding is shlibpath_var, we -- # have to relink, otherwise we might link with an installed library -- # when we should be linking with a yet-to-be-installed one -- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && -- test "$hardcode_minus_L_CXX" != no; then -- # Linking always hardcodes the temporary library directory. -- hardcode_action_CXX=relink -- else -- # We can link without hardcoding, and we can hardcode nonexisting dirs. -- hardcode_action_CXX=immediate -- fi --else -- # We cannot hardcode anything, or else we can only hardcode existing -- # directories. -- hardcode_action_CXX=unsupported --fi --echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 --echo "${ECHO_T}$hardcode_action_CXX" >&6 +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) ++solaris*) ++ case $cc_basename in ++ CC*) ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac --if test "$hardcode_action_CXX" = relink; then -- # Fast installation is not supported -- enable_fast_install=no --elif test "$shlibpath_overrides_runpath" = yes || -- test "$enable_shared" = no; then -- # Fast installation is not necessary -- enable_fast_install=needless --fi +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) ++ # Adding this requires a known-good setup of shared libraries for ++ # Sun compiler versions before 5.6, else PIC objects from an old ++ # archive will be linked into the output, leading to subtle bugs. ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++esac ++]) --striplib= --old_striplib= --echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 --echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 --if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then -- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" -- test -z "$striplib" && striplib="$STRIP --strip-unneeded" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 --else --# FIXME - insert some real tests, host_os isn't really good enough -- case $host_os in -- darwin*) -- if test -n "$STRIP" ; then -- striplib="$STRIP -x" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -- else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- ;; -- *) -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -- ;; -- esac --fi +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++case " $_LT_TAGVAR(postdeps, $1) " in ++*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; ++esac ++ _LT_TAGVAR(compiler_lib_search_dirs, $1)= ++if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then ++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` ++fi ++_LT_TAGDECL([], [compiler_lib_search_dirs], [1], ++ [The directories searched by this compiler when creating a shared library]) ++_LT_TAGDECL([], [predep_objects], [1], ++ [Dependencies to place before and after the objects being linked to ++ create a shared library]) ++_LT_TAGDECL([], [postdep_objects], [1]) ++_LT_TAGDECL([], [predeps], [1]) ++_LT_TAGDECL([], [postdeps], [1]) ++_LT_TAGDECL([], [compiler_lib_search_path], [1], ++ [The library search path used internally by the compiler when linking ++ a shared library]) ++])# _LT_SYS_HIDDEN_LIBDEPS --if test "x$enable_dlopen" != xyes; then -- enable_dlopen=unknown -- enable_dlopen_self=unknown -- enable_dlopen_self_static=unknown --else -- lt_cv_dlopen=no -- lt_cv_dlopen_libs= +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd -- case $host_os in -- beos*) -- lt_cv_dlopen="load_add_on" -- lt_cv_dlopen_libs= -- lt_cv_dlopen_self=yes -- ;; +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) ++# _LT_PROG_F77 ++# ------------ ++# Since AC_PROG_F77 is broken, in that it returns the empty string ++# if there is no fortran compiler, we have our own version here. ++m4_defun([_LT_PROG_F77], ++[ ++pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) ++AC_PROG_F77 ++if test -z "$F77" || test "X$F77" = "Xno"; then ++ _lt_disable_F77=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_F77 -- mingw* | pw32*) -- lt_cv_dlopen="LoadLibrary" -- lt_cv_dlopen_libs= -- ;; +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_F77], []) -- cygwin*) -- lt_cv_dlopen="dlopen" -- lt_cv_dlopen_libs= -- ;; +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds -- darwin*) -- # if libdl is installed we need to link against it -- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 --echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 --if test "${ac_cv_lib_dl_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldl $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval ++# _LT_LANG_F77_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for a Fortran 77 compiler are ++# suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_F77_CONFIG], ++[AC_REQUIRE([_LT_PROG_F77])dnl ++AC_LANG_PUSH(Fortran 77) --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); --int --main () --{ --dlopen (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dl_dlopen=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no --ac_cv_lib_dl_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 --if test $ac_cv_lib_dl_dlopen = yes; then -- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" --else +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++# Source file extension for f77 test sources. ++ac_ext=f -- lt_cv_dlopen="dyld" -- lt_cv_dlopen_libs= -- lt_cv_dlopen_self=yes +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++# Object file extension for compiled f77 test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext --fi +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var ++# No sense in running all these tests if we already determined that ++# the F77 compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_disable_F77" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" -- ;; +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var ++ # Code to be used in simple link tests ++ lt_simple_link_test_code="\ ++ program t ++ end ++" -- *) -- echo "$as_me:$LINENO: checking for shl_load" >&5 --echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 --if test "${ac_cv_func_shl_load+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --/* Define shl_load to an innocuous variant, in case declares shl_load. -- For example, HP-UX 11i declares gettimeofday. */ --#define shl_load innocuous_shl_load +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char shl_load (); below. -- Prefer to if __STDC__ is defined, since -- exists even on freestanding compilers. */ +-# How to hardcode a shared library path into an executable. +-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC="$CC" ++ lt_save_GCC=$GCC ++ CC=${F77-"f77"} ++ compiler=$CC ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ GCC=$G77 ++ if test -n "$compiler"; then ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) --#ifdef __STDC__ --# include --#else --# include --#endif +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no --#undef shl_load +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --{ --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char shl_load (); --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub_shl_load) || defined (__stub___shl_load) --choke me --#else --char (*f) () = shl_load; --#endif --#ifdef __cplusplus --} --#endif +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) ++ ++ _LT_TAGVAR(GCC, $1)="$G77" ++ _LT_TAGVAR(LD, $1)="$LD" ++ ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ GCC=$lt_save_GCC ++ CC="$lt_save_CC" ++fi # test "$_lt_disable_F77" != yes --int --main () --{ --return f != shl_load; -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_func_shl_load=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) ++AC_LANG_POP ++])# _LT_LANG_F77_CONFIG --ac_cv_func_shl_load=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 --echo "${ECHO_T}$ac_cv_func_shl_load" >&6 --if test $ac_cv_func_shl_load = yes; then -- lt_cv_dlopen="shl_load" --else -- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 --echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 --if test "${ac_cv_lib_dld_shl_load+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldld $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char shl_load (); --int --main () --{ --shl_load (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dld_shl_load=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) ++# _LT_PROG_FC ++# ----------- ++# Since AC_PROG_FC is broken, in that it returns the empty string ++# if there is no fortran compiler, we have our own version here. ++m4_defun([_LT_PROG_FC], ++[ ++pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) ++AC_PROG_FC ++if test -z "$FC" || test "X$FC" = "Xno"; then ++ _lt_disable_FC=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_FC ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_FC], []) ++ ++ ++# _LT_LANG_FC_CONFIG([TAG]) ++# ------------------------- ++# Ensure that the configuration variables for a Fortran compiler are ++# suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_FC_CONFIG], ++[AC_REQUIRE([_LT_PROG_FC])dnl ++AC_LANG_PUSH(Fortran) ++ ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no --ac_cv_lib_dld_shl_load=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 --echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 --if test $ac_cv_lib_dld_shl_load = yes; then -- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" --else -- echo "$as_me:$LINENO: checking for dlopen" >&5 --echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 --if test "${ac_cv_func_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --/* Define dlopen to an innocuous variant, in case declares dlopen. -- For example, HP-UX 11i declares gettimeofday. */ --#define dlopen innocuous_dlopen +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) ++# Source file extension for fc test sources. ++ac_ext=${ac_fc_srcext-f} --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char dlopen (); below. -- Prefer to if __STDC__ is defined, since -- exists even on freestanding compilers. */ +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) ++# Object file extension for compiled fc test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext --#ifdef __STDC__ --# include --#else --# include --#endif +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" ++# No sense in running all these tests if we already determined that ++# the FC compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_disable_FC" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" --#undef dlopen +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) ++ # Code to be used in simple link tests ++ lt_simple_link_test_code="\ ++ program t ++ end ++" --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --{ --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub_dlopen) || defined (__stub___dlopen) --choke me --#else --char (*f) () = dlopen; --#endif --#ifdef __cplusplus --} --#endif +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER --int --main () --{ --return f != dlopen; -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_func_dlopen=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC="$CC" ++ lt_save_GCC=$GCC ++ CC=${FC-"f95"} ++ compiler=$CC ++ GCC=$ac_cv_fc_compiler_gnu ++ ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ ++ if test -n "$compiler"; then ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no + +-# Set to yes if exported symbols are required. +-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) ++ ++ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" ++ _LT_TAGVAR(LD, $1)="$LD" ++ ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_SYS_HIDDEN_LIBDEPS($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ GCC=$lt_save_GCC ++ CC="$lt_save_CC" ++fi # test "$_lt_disable_FC" != yes --ac_cv_func_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 --echo "${ECHO_T}$ac_cv_func_dlopen" >&6 --if test $ac_cv_func_dlopen = yes; then -- lt_cv_dlopen="dlopen" --else -- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 --echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 --if test "${ac_cv_lib_dl_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldl $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds ++AC_LANG_POP ++])# _LT_LANG_FC_CONFIG --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); --int --main () --{ --dlopen (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dl_dlopen=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) --ac_cv_lib_dl_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 --if test $ac_cv_lib_dl_dlopen = yes; then -- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" --else -- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 --echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 --if test "${ac_cv_lib_svld_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-lsvld $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ +-# Symbols that must always be exported. +-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) ++# _LT_LANG_GCJ_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for the GNU Java Compiler compiler ++# are suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_GCJ_CONFIG], ++[AC_REQUIRE([LT_PROG_GCJ])dnl ++AC_LANG_SAVE --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); --int --main () --{ --dlopen (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_svld_dlopen=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +-ifelse([$1],[], +-[# ### END LIBTOOL CONFIG], +-[# ### END LIBTOOL TAG CONFIG: $tagname]) ++# Source file extension for Java test sources. ++ac_ext=java --ac_cv_lib_svld_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 --if test $ac_cv_lib_svld_dlopen = yes; then -- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" --else -- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 --echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 --if test "${ac_cv_lib_dld_dld_link+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldld $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ +-__EOF__ ++# Object file extension for compiled Java test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dld_link (); --int --main () --{ --dld_link (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dld_dld_link=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +-ifelse([$1],[], [ +- case $host_os in +- aix3*) +- cat <<\EOF >> "$cfgfile" ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="class foo {}" --ac_cv_lib_dld_dld_link=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 --echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 --if test $ac_cv_lib_dld_dld_link = yes; then -- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +-# AIX sometimes has problems with the GCC collect2 program. For some +-# reason, if we set the COLLECT_NAMES environment variable, the problems +-# vanish in a puff of smoke. +-if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES -fi +-EOF +- ;; +- esac ++# Code to be used in simple link tests ++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' +- # We use sed instead of cat because bash on DJGPP gets confused if +- # if finds mixed CR/LF and LF-only lines. Since sed operates in +- # text mode, it properly converts lines to CR/LF. This bash problem +- # is reportedly fixed, but why not run on old versions too? +- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++_LT_TAG_COMPILER +- mv -f "$cfgfile" "$ofile" || \ +- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") +- chmod +x "$ofile" +-]) +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi -fi +-])# AC_LIBTOOL_CONFIG ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++lt_save_GCC=$GCC ++GCC=yes ++CC=${GCJ-"gcj"} ++compiler=$CC ++_LT_TAGVAR(compiler, $1)=$CC ++_LT_TAGVAR(LD, $1)="$LD" ++_LT_CC_BASENAME([$compiler]) --fi +-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +-# ------------------------------------------- +-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl ++# GCJ did not exist at the time GCC didn't implicitly link libc in. ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no +-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds --fi +-if test "$GCC" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ++if test -n "$compiler"; then ++ _LT_COMPILER_NO_RTTI($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) +- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], +- lt_cv_prog_compiler_rtti_exceptions, +- [-fno-rtti -fno-exceptions], [], +- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) ++ _LT_CONFIG($1) + fi +-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI +- --fi +-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +-# --------------------------------- +-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +-[AC_REQUIRE([AC_CANONICAL_HOST]) +-AC_REQUIRE([AC_PROG_NM]) +-AC_REQUIRE([AC_OBJEXT]) +-# Check for command to grab the raw symbol name followed by C symbol from nm. +-AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +-[ +-# These are sane defaults that work on at least a few old systems. +-# [They come from Ultrix. What could be older than Ultrix?!! ;)] ++AC_LANG_RESTORE +-# Character class describing NM global symbol codes. +-symcode='[[BCDEGRST]]' ++GCC=$lt_save_GCC ++CC="$lt_save_CC" ++])# _LT_LANG_GCJ_CONFIG --fi +-# Regexp to match symbols that can be accessed directly from C. +-sympat='$[[_A-Za-z]][[_A-Za-z0-9]]*$' -- ;; -- esac +-# Transform the above into a raw symbol and a C symbol. +-symxfrm='\1 \2\3 \3' ++# _LT_LANG_RC_CONFIG([TAG]) ++# ------------------------- ++# Ensure that the configuration variables for the Windows resource compiler ++# are suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_RC_CONFIG], ++[AC_REQUIRE([LT_PROG_RC])dnl ++AC_LANG_SAVE -- if test "x$lt_cv_dlopen" != xno; then -- enable_dlopen=yes -- else -- enable_dlopen=no -- fi +-# Transform an extracted symbol line into a proper C declaration +-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* $.*$$/extern int \1;/p'" ++# Source file extension for RC test sources. ++ac_ext=rc -- case $lt_cv_dlopen in -- dlopen) -- save_CPPFLAGS="$CPPFLAGS" -- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +-# Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (lt_ptr) \&\2},/p'" ++# Object file extension for compiled RC test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext -- save_LDFLAGS="$LDFLAGS" -- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" +-# Define system-specific variables. +-case $host_os in +-aix*) +- symcode='[[BCDT]]' +- ;; +-cygwin* | mingw* | pw32*) +- symcode='[[ABCDGISTW]]' +- ;; +-hpux*) # Its linker distinguishes data from code symbols +- if test "$host_cpu" = ia64; then +- symcode='[[ABCDEGRST]]' +- fi +- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" +- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (lt_ptr) \&\2},/p'" +- ;; +-irix* | nonstopux*) +- symcode='[[BCDEGRST]]' +- ;; +-osf*) +- symcode='[[BCDEGQRST]]' +- ;; +-solaris* | sysv5*) +- symcode='[[BDRT]]' +- ;; +-sysv4) +- symcode='[[DFNSTU]]' +- ;; +-esac ++# Code to be used in simple compile tests ++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' -- save_LIBS="$LIBS" -- LIBS="$lt_cv_dlopen_libs $LIBS" +-# Handle CRLF in mingw tool chain +-opt_cr= +-case $build_os in +-mingw*) +- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp +- ;; +-esac ++# Code to be used in simple link tests ++lt_simple_link_test_code="$lt_simple_compile_test_code" -- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 --echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 --if test "${lt_cv_dlopen_self+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test "$cross_compiling" = yes; then : -- lt_cv_dlopen_self=cross --else -- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 -- lt_status=$lt_dlunknown -- cat > conftest.$ac_ext <&1` in +-*GNU* | *'with BFD'*) +- symcode='[[ABCDGIRSTW]]' ;; +-esac ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++_LT_TAG_COMPILER --#if HAVE_DLFCN_H --#include --#endif +-# Try without a prefix undercore, then with it. +-for ac_symprfx in "" "_"; do ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE --#include +- # Write the raw and C identifiers. +- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]$$symcode$symcode*$[[ ]][[ ]]*$$ac_symprfx$$sympat$opt_cr$/$symxfrm/p'" ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++lt_save_GCC=$GCC ++GCC= ++CC=${RC-"windres"} ++compiler=$CC ++_LT_TAGVAR(compiler, $1)=$CC ++_LT_CC_BASENAME([$compiler]) ++_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes --#ifdef RTLD_GLOBAL --# define LT_DLGLOBAL RTLD_GLOBAL --#else --# ifdef DL_GLOBAL --# define LT_DLGLOBAL DL_GLOBAL --# else --# define LT_DLGLOBAL 0 --# endif --#endif +- # Check to see that the pipe works correctly. +- pipe_works=no ++if test -n "$compiler"; then ++ : ++ _LT_CONFIG($1) ++fi --/* We may have to define LT_DLLAZY_OR_NOW in the command line if we -- find out it does not work in some platform. */ --#ifndef LT_DLLAZY_OR_NOW --# ifdef RTLD_LAZY --# define LT_DLLAZY_OR_NOW RTLD_LAZY --# else --# ifdef DL_LAZY --# define LT_DLLAZY_OR_NOW DL_LAZY --# else --# ifdef RTLD_NOW --# define LT_DLLAZY_OR_NOW RTLD_NOW --# else --# ifdef DL_NOW --# define LT_DLLAZY_OR_NOW DL_NOW --# else --# define LT_DLLAZY_OR_NOW 0 --# endif --# endif --# endif --# endif +- rm -f conftest* +- cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then +- # Try sorting and uniquifying the output. +- if sort "$nlist" | uniq > "$nlist"T; then +- mv -f "$nlist"T "$nlist" +- else +- rm -f "$nlist"T +- fi +- # Make sure that we snagged all the symbols we need. +- if grep ' nm_test_var$' "$nlist" >/dev/null; then +- if grep ' nm_test_func$' "$nlist" >/dev/null; then +- cat < conftest.$ac_ext -#ifdef __cplusplus --extern "C" void exit (int); +-extern "C" { -#endif ++# LT_PROG_GCJ ++# ----------- ++AC_DEFUN([LT_PROG_GCJ], ++[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], ++ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], ++ [AC_CHECK_TOOL(GCJ, gcj,) ++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" ++ AC_SUBST(GCJFLAGS)])])[]dnl ++]) --void fnord() { int i=42;} --int main () --{ -- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -- int status = $lt_dlunknown; +-EOF +- # Now generate the symbol file. +- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' ++# Old name: ++AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_GCJ], []) -- if (self) -- { -- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -- /* dlclose (self); */ -- } +- cat <> conftest.$ac_ext +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr_t void * +-#else +-# define lt_ptr_t char * +-# define const +-#endif -- exit (status); +-/* The mapping between symbol names and symbols. */ +-const struct { +- const char *name; +- lt_ptr_t address; -} +-lt_preloaded_symbols[[]] = +-{ -EOF -- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then -- (./conftest; exit; ) 2>/dev/null -- lt_status=$? -- case x$lt_status in -- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; -- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; -- x$lt_unknown|x*) lt_cv_dlopen_self=no ;; -- esac -- else : -- # compilation failed -- lt_cv_dlopen_self=no -- fi --fi --rm -fr conftest* +- $SED "s/^$symcode$symcode* $.*$ $.*$$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext +- cat <<\EOF >> conftest.$ac_ext +- {0, (lt_ptr_t) 0} +-}; ++# LT_PROG_RC ++# ---------- ++AC_DEFUN([LT_PROG_RC], ++[AC_CHECK_TOOL(RC, windres,) ++]) +-#ifdef __cplusplus +-} +-#endif +-EOF +- # Now try linking the two files. +- mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" +- LIBS="conftstm.$ac_objext" +- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" +- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then +- pipe_works=yes +- fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" +- else +- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD +- fi +- else +- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD +- fi +- else +- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD +- fi +- else +- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD +- cat conftest.$ac_ext >&5 +- fi +- rm -f conftest* conftst* ++# Old name: ++AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_RC], []) +- # Do not use the global_symbol_pipe unless it works. +- if test "$pipe_works" = yes; then +- break +- else +- lt_cv_sys_global_symbol_pipe= +- fi +-done ++ ++# _LT_DECL_EGREP ++# -------------- ++# If we don't have a new enough Autoconf to choose the best grep ++# available, choose the one first in the user's PATH. ++m4_defun([_LT_DECL_EGREP], ++[AC_REQUIRE([AC_PROG_EGREP])dnl ++AC_REQUIRE([AC_PROG_FGREP])dnl ++test -z "$GREP" && GREP=grep ++_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) ++_LT_DECL([], [EGREP], [1], [An ERE matcher]) ++_LT_DECL([], [FGREP], [1], [A literal string matcher]) ++dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too ++AC_SUBST([GREP]) + ]) +-if test -z "$lt_cv_sys_global_symbol_pipe"; then +- lt_cv_sys_global_symbol_to_cdecl= -fi --echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 --echo "${ECHO_T}$lt_cv_dlopen_self" >&6 - -- if test "x$lt_cv_dlopen_self" = xyes; then -- LDFLAGS="$LDFLAGS $link_static_flag" -- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 --echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 --if test "${lt_cv_dlopen_self_static+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test "$cross_compiling" = yes; then : -- lt_cv_dlopen_self_static=cross +-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- AC_MSG_RESULT(failed) -else -- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 -- lt_status=$lt_dlunknown -- cat > conftest.$ac_ext < --#endif - --#include +- AC_MSG_RESULT(ok) +-fi +-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE --#ifdef RTLD_GLOBAL --# define LT_DLGLOBAL RTLD_GLOBAL --#else --# ifdef DL_GLOBAL --# define LT_DLGLOBAL DL_GLOBAL --# else --# define LT_DLGLOBAL 0 --# endif --#endif --/* We may have to define LT_DLLAZY_OR_NOW in the command line if we -- find out it does not work in some platform. */ --#ifndef LT_DLLAZY_OR_NOW --# ifdef RTLD_LAZY --# define LT_DLLAZY_OR_NOW RTLD_LAZY --# else --# ifdef DL_LAZY --# define LT_DLLAZY_OR_NOW DL_LAZY --# else --# ifdef RTLD_NOW --# define LT_DLLAZY_OR_NOW RTLD_NOW --# else --# ifdef DL_NOW --# define LT_DLLAZY_OR_NOW DL_NOW --# else --# define LT_DLLAZY_OR_NOW 0 --# endif --# endif --# endif --# endif --#endif -- --#ifdef __cplusplus --extern "C" void exit (int); --#endif -- --void fnord() { int i=42;} --int main () --{ -- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -- int status = $lt_dlunknown; +-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +-# --------------------------------------- +-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= ++# _LT_DECL_OBJDUMP ++# -------------- ++# If we don't have a new enough Autoconf to choose the best objdump ++# available, choose the one first in the user's PATH. ++m4_defun([_LT_DECL_OBJDUMP], ++[AC_CHECK_TOOL(OBJDUMP, objdump, false) ++test -z "$OBJDUMP" && OBJDUMP=objdump ++_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) ++AC_SUBST([OBJDUMP]) ++]) -- if (self) -- { -- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -- /* dlclose (self); */ -- } +-AC_MSG_CHECKING([for $compiler option to produce PIC]) +- ifelse([$1],[CXX],[ +- # C++ specific cases for pic, static, wl, etc. +- if test "$GXX" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' -- exit (status); --} --EOF -- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then -- (./conftest; exit; ) 2>/dev/null -- lt_status=$? -- case x$lt_status in -- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; -- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; -- x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- fi +- ;; +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' +- ;; +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; +- mingw* | os2* | pw32*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' +- ;; +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' +- ;; +- *djgpp*) +- # DJGPP does not support shared libraries at all +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- ;; +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic +- fi +- ;; +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case "$host_cpu" in +- hppa*64*|ia64*) +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- else +- case $host_os in +- aix4* | aix5*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- else +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- chorus*) +- case $cc_basename in +- cxch68) +- # Green Hills C++ Compiler +- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" +- ;; +- esac +- ;; +- dgux*) +- case $cc_basename in +- ec++) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- ;; +- ghcx) +- # Green Hills C++ Compiler +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- freebsd* | kfreebsd*-gnu) +- # FreeBSD uses GNU C++ +- ;; +- hpux9* | hpux10* | hpux11*) +- case $cc_basename in +- CC) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" +- if test "$host_cpu" != ia64; then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- fi +- ;; +- aCC) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" +- case "$host_cpu" in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- ;; +- esac +- ;; +- *) +- ;; +- esac +- ;; +- irix5* | irix6* | nonstopux*) +- case $cc_basename in +- CC) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- # CC pic flag -KPIC is the default. +- ;; +- *) +- ;; +- esac +- ;; +- linux*) +- case $cc_basename in +- KCC) +- # KAI C++ Compiler +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- icpc) +- # Intel C++ +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +- ;; +- cxx) +- # Compaq C++ +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- *) +- ;; +- esac +- ;; +- lynxos*) +- ;; +- m88k*) +- ;; +- mvs*) +- case $cc_basename in +- cxx) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' +- ;; +- *) +- ;; +- esac +- ;; +- netbsd*) +- ;; +- osf3* | osf4* | osf5*) +- case $cc_basename in +- KCC) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' +- ;; +- RCC) +- # Rational C++ 2.4.1 +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- ;; +- cxx) +- # Digital/Compaq C++ +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- *) +- ;; +- esac +- ;; +- psos*) +- ;; +- sco*) +- case $cc_basename in +- CC) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- *) +- ;; +- esac +- ;; +- solaris*) +- case $cc_basename in +- CC) +- # Sun C++ 4.2, 5.x and Centerline C++ +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' +- ;; +- gcx) +- # Green Hills C++ Compiler +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' +- ;; +- *) +- ;; +- esac +- ;; +- sunos4*) +- case $cc_basename in +- CC) +- # Sun C++ 4.x +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- lcc) +- # Lucid +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- tandem*) +- case $cc_basename in +- NCC) +- # NonStop-UX NCC 3.20 +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- ;; +- *) +- ;; +- esac +- ;; +- unixware*) +- ;; +- vxworks*) +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; - esac -- else : -- # compilation failed -- lt_cv_dlopen_self_static=no - fi --fi --rm -fr conftest* +-], +-[ +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ++# _LT_DECL_SED ++# ------------ ++# Check for a fully-functional sed program, that truncates ++# as few characters as possible. Prefer GNU sed if found. ++m4_defun([_LT_DECL_SED], ++[AC_PROG_SED ++test -z "$SED" && SED=sed ++Xsed="$SED -e 1s/^X//" ++_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) ++_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], ++ [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ++])# _LT_DECL_SED ++ ++m4_ifndef([AC_PROG_SED], [ ++# NOTE: This macro has been submitted for inclusion into # ++# GNU Autoconf as AC_PROG_SED. When it is available in # ++# a released version of Autoconf we should remove this # ++# macro and use it instead. # +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++m4_defun([AC_PROG_SED], ++[AC_MSG_CHECKING([for a sed that does not truncate output]) ++AC_CACHE_VAL(lt_cv_path_SED, ++[# Loop through the user's path and test for sed and gsed. ++# Then use that list of sed's as ones to test for truncation. ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for lt_ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then ++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi +- ;; ++ done ++ done ++done ++IFS=$as_save_IFS ++lt_ac_max=0 ++lt_ac_count=0 ++# Add /usr/xpg4/bin/sed as it is typically found on Solaris ++# along with /bin/sed that truncates output. ++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do ++ test ! -f $lt_ac_sed && continue ++ cat /dev/null > conftest.in ++ lt_ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in ++ # Check for GNU sed and select it if it is found. ++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then ++ lt_cv_path_SED=$lt_ac_sed ++ break ++ fi ++ while true; do ++ cat conftest.in conftest.in >conftest.tmp ++ mv conftest.tmp conftest.in ++ cp conftest.in conftest.nl ++ echo >>conftest.nl ++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break ++ cmp -s conftest.out conftest.nl || break ++ # 10000 chars as input seems more than enough ++ test $lt_ac_count -gt 10 && break ++ lt_ac_count=`expr $lt_ac_count + 1` ++ if test $lt_ac_count -gt $lt_ac_max; then ++ lt_ac_max=$lt_ac_count ++ lt_cv_path_SED=$lt_ac_sed ++ fi ++ done ++done ++]) ++SED=$lt_cv_path_SED ++AC_SUBST([SED]) ++AC_MSG_RESULT([$SED]) ++])#AC_PROG_SED ++])#m4_ifndef --fi --echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 --echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 -- fi +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' +- ;; ++# Old name: ++AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_SED], []) -- CPPFLAGS="$save_CPPFLAGS" -- LDFLAGS="$save_LDFLAGS" -- LIBS="$save_LIBS" -- ;; -- esac +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; -- case $lt_cv_dlopen_self in -- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; -- *) enable_dlopen_self=unknown ;; -- esac +- mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' +- ;; ++# _LT_CHECK_SHELL_FEATURES ++# ------------------------ ++# Find out whether the shell is Bourne or XSI compatible, ++# or has some other useful features. ++m4_defun([_LT_CHECK_SHELL_FEATURES], ++[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) ++# Try some XSI features ++xsi_shell=no ++( _lt_dummy="a/b/c" ++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,, \ ++ && eval 'test $(( 1 + 1 )) -eq 2 \ ++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ ++ && xsi_shell=yes ++AC_MSG_RESULT([$xsi_shell]) ++_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) ++ ++AC_MSG_CHECKING([whether the shell understands "+="]) ++lt_shell_append=no ++( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ ++ >/dev/null 2>&1 \ ++ && lt_shell_append=yes ++AC_MSG_RESULT([$lt_shell_append]) ++_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) -- case $lt_cv_dlopen_self_static in -- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; -- *) enable_dlopen_self_static=unknown ;; -- esac --fi +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' +- ;; ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ lt_unset=unset ++else ++ lt_unset=false ++fi ++_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- enable_shared=no +- ;; ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ lt_SP2NL='tr \040 \012' ++ lt_NL2SP='tr \015\012 \040\040' ++ ;; ++ *) # EBCDIC based system ++ lt_SP2NL='tr \100 \n' ++ lt_NL2SP='tr \r\n \100\100' ++ ;; ++esac ++_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl ++_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ++])# _LT_CHECK_SHELL_FEATURES ++ ++ ++# _LT_PROG_XSI_SHELLFNS ++# --------------------- ++# Bourne and XSI compatible variants of some useful shell functions. ++m4_defun([_LT_PROG_XSI_SHELLFNS], ++[case $xsi_shell in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++} --# The else clause should only fire when bootstrapping the --# libtool distribution, otherwise you forgot to ship ltmain.sh --# with your package, and you will get complaints that there are --# no rules to generate ltmain.sh. --if test -f "$ltmain"; then -- # See if we are running on zsh, and set the options which allow our commands through -- # without removal of \ escapes. -- if test -n "${ZSH_VERSION+set}" ; then -- setopt NO_GLOB_SUBST -- fi -- # Now quote all the things that may contain metacharacters while being -- # careful not to overquote the AC_SUBSTed values. We take copies of the -- # variables and quote the copies for generation of the libtool script. -- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ -- SED SHELL STRIP \ -- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ -- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ -- deplibs_check_method reload_flag reload_cmds need_locks \ -- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ -- lt_cv_sys_global_symbol_to_c_name_address \ -- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ -- old_postinstall_cmds old_postuninstall_cmds \ -- compiler_CXX \ -- CC_CXX \ -- LD_CXX \ -- lt_prog_compiler_wl_CXX \ -- lt_prog_compiler_pic_CXX \ -- lt_prog_compiler_static_CXX \ -- lt_prog_compiler_no_builtin_flag_CXX \ -- export_dynamic_flag_spec_CXX \ -- thread_safe_flag_spec_CXX \ -- whole_archive_flag_spec_CXX \ -- enable_shared_with_static_runtimes_CXX \ -- old_archive_cmds_CXX \ -- old_archive_from_new_cmds_CXX \ -- predep_objects_CXX \ -- postdep_objects_CXX \ -- predeps_CXX \ -- postdeps_CXX \ -- compiler_lib_search_path_CXX \ -- archive_cmds_CXX \ -- archive_expsym_cmds_CXX \ -- postinstall_cmds_CXX \ -- postuninstall_cmds_CXX \ -- old_archive_from_expsyms_cmds_CXX \ -- allow_undefined_flag_CXX \ -- no_undefined_flag_CXX \ -- export_symbols_cmds_CXX \ -- hardcode_libdir_flag_spec_CXX \ -- hardcode_libdir_flag_spec_ld_CXX \ -- hardcode_libdir_separator_CXX \ -- hardcode_automatic_CXX \ -- module_cmds_CXX \ -- module_expsym_cmds_CXX \ -- lt_cv_prog_compiler_c_o_CXX \ -- exclude_expsyms_CXX \ -- include_expsyms_CXX; do -- -- case $var in -- old_archive_cmds_CXX | \ -- old_archive_from_new_cmds_CXX | \ -- archive_cmds_CXX | \ -- archive_expsym_cmds_CXX | \ -- module_cmds_CXX | \ -- module_expsym_cmds_CXX | \ -- old_archive_from_expsyms_cmds_CXX | \ -- export_symbols_cmds_CXX | \ -- extract_expsyms_cmds | reload_cmds | finish_cmds | \ -- postinstall_cmds | postuninstall_cmds | \ -- old_postinstall_cmds | old_postuninstall_cmds | \ -- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) -- # Double-quote double-evaled strings. -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic +- fi +- ;; ++# func_basename file ++func_basename () ++{ ++ func_basename_result="${1##*/}" ++} + +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case "$host_cpu" in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac - ;; ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++ func_basename_result="${1##*/}" ++} + - *) -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac -- done +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- else +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++func_stripname () ++{ ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"} ++} -- case $lt_echo in -- *'\$0 --fallback-echo"') -- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` -- ;; -- esac +- mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' +- ;; ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=${1%%=*} ++ func_opt_split_arg=${1#*=} ++} --cfgfile="$ofile" +- hpux9* | hpux10* | hpux11*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case "$host_cpu" in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' +- ;; ++# func_lo2o object ++func_lo2o () ++{ ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; ++ esac ++} -- cat <<__EOF__ >> "$cfgfile" --# ### BEGIN LIBTOOL TAG CONFIG: $tagname +- irix5* | irix6* | nonstopux*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # PIC (with -KPIC) is the default. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=${1%.*}.lo ++} --# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +- newsos6) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=$(( $[*] )) ++} --# Shell to use when invoking shell scripts. --SHELL=$lt_SHELL +- linux*) +- case $CC in +- icc* | ecc*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +- ;; +- ccc*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # All Alpha code is PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- esac +- ;; ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=${#1} ++} --# Whether or not to build shared libraries. --build_libtool_libs=$enable_shared +- osf3* | osf4* | osf5*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # All OSF/1 code is PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; ++_LT_EOF ++ ;; ++ *) # Bourne compatible functions. ++ cat << \_LT_EOF >> "$cfgfile" --# Whether or not to build static libraries. --build_old_libs=$enable_static +- sco3.2v5*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' +- ;; ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++} --# Whether or not to add -lc for building shared libraries. --build_libtool_need_lc=$archive_cmds_need_lc_CXX +- solaris*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} --# Whether or not to disallow shared libs when runtime libs are static --allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX +- sunos4*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++dnl func_dirname_and_basename ++dnl A portable version of this function is already defined in general.m4sh ++dnl so there is no need for it here. ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; ++ esac ++} --# Whether or not to optimize for fast installation. --fast_install=$enable_fast_install +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++# sed scripts: ++my_sed_long_opt='1s/^$-[[^=]]*$=.*/\1/;q' ++my_sed_long_arg='1s/^-[[^=]]*=//' --# The host system. --host_alias=$host_alias --host=$host +- sysv4*MP*) +- if test -d /usr/nec ;then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- fi +- ;; ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` ++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` ++} + +- uts4*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` ++} --# An echo program that does not interpret backslashes. --echo=$lt_echo +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; +- esac +- fi +-]) +-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` ++} --# The archiver. --AR=$lt_AR --AR_FLAGS=$lt_AR_FLAGS +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then +- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], +- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), +- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], +- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in +- "" | " "*) ;; +- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; +- esac], +- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +-fi +-case "$host_os" in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" +- ;; +-esac +-]) ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "$[@]"` ++} --# A C compiler. --LTCC=$lt_LTCC ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` ++} --# A language-specific compiler. --CC=$lt_compiler_CXX +-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +-# ------------------------------------ +-# See if the linker supports building shared libraries. +-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +-ifelse([$1],[CXX],[ +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- case $host_os in +- aix4* | aix5*) +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- else +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- fi ++_LT_EOF ++esac ++ ++case $lt_shell_append in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$[1]+=\$[2]" ++} ++_LT_EOF + ;; +- pw32*) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" +- ;; +- cygwin* | mingw*) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* $[[^ ]]*$/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' +- ;; + *) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- ;; +- esac +-],[ +- runpath_var= +- _LT_AC_TAGVAR(allow_undefined_flag, $1)= +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no +- _LT_AC_TAGVAR(archive_cmds, $1)= +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)= +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= +- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +- _LT_AC_TAGVAR(hardcode_automatic, $1)=no +- _LT_AC_TAGVAR(module_cmds, $1)= +- _LT_AC_TAGVAR(module_expsym_cmds, $1)= +- _LT_AC_TAGVAR(always_export_symbols, $1)=no +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- _LT_AC_TAGVAR(include_expsyms, $1)= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- extract_expsyms_cmds= ++ cat << \_LT_EOF >> "$cfgfile" --# Is the compiler the GNU C compiler? --with_gcc=$GCC_CXX +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- openbsd*) +- with_gnu_ld=no ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$[1]=\$$[1]\$[2]" ++} ++ ++_LT_EOF + ;; + esac ++]) --# An ERE matcher. --EGREP=$lt_EGREP +- _LT_AC_TAGVAR(ld_shlibs, $1)=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' ++# Helper functions for option handling. -*- Autoconf -*- ++# ++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gary V. Vaughan, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. --# The linker used to build libraries. --LD=$lt_LD_CXX +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix3* | aix4* | aix5*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <&2 ++# serial 6 ltoptions.m4 --# Whether we need hard or soft links. --LN_S=$lt_LN_S +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) --# A BSD-compatible nm program. --NM=$lt_NM +-EOF +- fi +- ;; --# A symbol stripping program --STRIP=$lt_STRIP +- amigaos*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; ++# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) ++# ------------------------------------------ ++m4_define([_LT_MANGLE_OPTION], ++[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) --# Used to examine libraries when file_magic_cmd begins "file" --MAGIC_CMD=$MAGIC_CMD +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; --# Used on cygwin: DLL creation program. --DLLTOOL="$DLLTOOL" +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, +- # as there is no search path for DLLs. +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(always_export_symbols, $1)=no +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* $[[^ ]]*$/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' ++# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) ++# --------------------------------------- ++# Set option OPTION-NAME for macro MACRO-NAME, and if there is a ++# matching handler defined, dispatch to it. Other OPTION-NAMEs are ++# saved as a flag. ++m4_define([_LT_SET_OPTION], ++[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl ++m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), ++ _LT_MANGLE_DEFUN([$1], [$2]), ++ [m4_warning([Unknown $1 option `$2'])])[]dnl ++]) --# Used on cygwin: object dumper. --OBJDUMP="$OBJDUMP" +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- else +- ld_shlibs=no +- fi +- ;; --# Used on cygwin: assembler. --AS="$AS" -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -+$as_echo_n "checking dynamic linker characteristics... " >&6; } +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; ++# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------------------------ ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++m4_define([_LT_IF_OPTION], ++[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) --# The name of the directory that contains temporary libtool files. --objdir=$objdir -+if test "$GCC" = yes; then -+ case $host_os in -+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; -+ *) lt_awk_arg="/^libraries:/" ;; -+ esac -+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` -+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then -+ # if the path contains ";" then we assume it to be the separator -+ # otherwise default to the standard path separator (i.e. ":") - it is -+ # assumed that no part of a normal pathname contains ";" but that should -+ # okay in the real world where ";" in dirpaths is itself problematic. -+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` -+ else -+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ fi -+ # Ok, now we have the path, separated by spaces, we can step through it -+ # and add multilib dir if necessary. -+ lt_tmp_lt_search_path_spec= -+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` -+ for lt_sys_path in $lt_search_path_spec; do -+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then -+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" -+ else -+ test -d "$lt_sys_path" && \ -+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" -+ fi -+ done -+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' -+BEGIN {RS=" "; FS="/|\n";} { -+ lt_foo=""; -+ lt_count=0; -+ for (lt_i = NF; lt_i > 0; lt_i--) { -+ if ($lt_i != "" && $lt_i != ".") { -+ if ($lt_i == "..") { -+ lt_count++; -+ } else { -+ if (lt_count == 0) { -+ lt_foo="/" $lt_i lt_foo; -+ } else { -+ lt_count--; -+ } -+ } -+ } -+ } -+ if (lt_foo != "") { lt_freq[lt_foo]++; } -+ if (lt_freq[lt_foo] == 1) { print lt_foo; } -+}'` -+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` -+else -+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -+fi -+library_names_spec= -+libname_spec='lib$name' -+soname_spec= -+shrext_cmds=".so" -+postinstall_cmds= -+postuninstall_cmds= -+finish_cmds= -+finish_eval= -+shlibpath_var= -+shlibpath_overrides_runpath=unknown -+version_type=none -+dynamic_linker="$host_os ld.so" -+sys_lib_dlsearch_path_spec="/lib /usr/lib" -+need_lib_prefix=unknown -+hardcode_into_libs=no +- solaris* | sysv5*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <&2 --# How to create reloadable object files. --reload_flag=$lt_reload_flag --reload_cmds=$lt_reload_cmds -+# when you set need_version to no, make sure it does not cause -set_version -+# flags to be left without arguments -+need_version=unknown +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. ++# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) ++# ------------------------------------------------------- ++# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME ++# are set. ++m4_define([_LT_UNLESS_OPTIONS], ++[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), ++ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), ++ [m4_define([$0_found])])])[]dnl ++m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ++])[]dnl ++]) --# How to pass a linker flag through the compiler. --wl=$lt_lt_prog_compiler_wl_CXX -+case $host_os in -+aix3*) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' -+ shlibpath_var=LIBPATH +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; --# Object file suffix (normally "o"). --objext="$ac_objext" -+ # AIX 3 has no versioning support, so we append a major version to the name. -+ soname_spec='${libname}${release}${shared_ext}$major' -+ ;; +- sunos4*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) ++# ---------------------------------------- ++# OPTION-LIST is a space-separated list of Libtool options associated ++# with MACRO-NAME. If any OPTION has a matching handler declared with ++# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about ++# the unknown option and exit. ++m4_defun([_LT_SET_OPTIONS], ++[# Set options ++m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), ++ [_LT_SET_OPTION([$1], _LT_Option)]) ++ ++m4_if([$1],[LT_INIT],[ ++ dnl ++ dnl Simply set some default values (i.e off) if boolean options were not ++ dnl specified: ++ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ++ ]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ++ ]) ++ dnl ++ dnl If no reference was made to various pairs of opposing options, then ++ dnl we run the default mode handler for the pair. For example, if neither ++ dnl `shared' nor `disable-shared' was passed, we enable building of shared ++ dnl archives by default: ++ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], ++ [_LT_ENABLE_FAST_INSTALL]) ++ ]) ++])# _LT_SET_OPTIONS --# Old archive suffix (normally "a"). --libext="$libext" -+aix[4-9]*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ hardcode_into_libs=yes -+ if test "$host_cpu" = ia64; then -+ # AIX 5 supports IA64 -+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ else -+ # With GCC up to 2.95.x, collect2 would create an import file -+ # for dependence libraries. The import file would start with -+ # the line `#! .'. This would cause the generated library to -+ # depend on `.', always an invalid library. This was fixed in -+ # development snapshots of GCC prior to 3.0. -+ case $host_os in -+ aix4 | aix4.[01] | aix4.[01].*) -+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' -+ echo ' yes ' -+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then -+ : -+ else -+ can_build_shared=no -+ fi -+ ;; -+ esac -+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct -+ # soname into executable. Probably we can add versioning support to -+ # collect2, so additional links can be useful in future. -+ if test "$aix_use_runtimelinking" = yes; then -+ # If using run time linking (on AIX 4.2 or later) use lib.so -+ # instead of lib.a to let people know that these are not -+ # typical AIX shared libraries. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ else -+ # We preserve .a as extension for shared libraries through AIX4.2 -+ # and later when we are not doing run time linking. -+ library_names_spec='${libname}${release}.a $libname.a' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ fi -+ shlibpath_var=LIBPATH -+ fi -+ ;; +- linux*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds" +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- if test $supports_anon_versioning = yes; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ +-cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ +-$echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- else +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds" +- fi +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; + +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac --# Shared library suffix (normally ".so"). --shrext_cmds='$shrext_cmds' -+amigaos*) -+ case $host_cpu in -+ powerpc) -+ # Since July 2007 AmigaOS4 officially supports .so libraries. -+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ ;; -+ m68k) -+ library_names_spec='$libname.ixlibrary $libname.a' -+ # Create ${libname}_ixlibrary.a entries in /sys/libs. -+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' -+ ;; -+ esac -+ ;; +- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then +- runpath_var=LD_RUN_PATH +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- fi +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +- fi +- ;; ++# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) ++# ----------------------------------------- ++m4_define([_LT_MANGLE_DEFUN], ++[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) --# Executable file suffix (normally ""). --exeext="$exeext" -+beos*) -+ library_names_spec='${libname}${shared_ext}' -+ dynamic_linker="$host_os ld.so" -+ shlibpath_var=LIBRARY_PATH -+ ;; +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- else +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no --# Additional compiler flags for building library objects. --pic_flag=$lt_lt_prog_compiler_pic_CXX --pic_mode=$pic_mode -+bsdi[45]*) -+ version_type=linux -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" -+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" -+ # the default ld.so.conf also contains /usr/contrib/lib and -+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow -+ # libtool to hard-code these into programs -+ ;; +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- esac ++# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) ++# ----------------------------------------------- ++m4_define([LT_OPTION_DEFINE], ++[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ++])# LT_OPTION_DEFINE --# What is the maximum length of a command? --max_cmd_len=$lt_cv_sys_max_cmd_len -+cygwin* | mingw* | pw32* | cegcc*) -+ version_type=windows -+ shrext_cmds=".dll" -+ need_version=no -+ need_lib_prefix=no +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi --# Does compiler simultaneously support -c and -o options? --compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX -+ case $GCC,$host_os in -+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) -+ library_names_spec='$libname.dll.a' -+ # DLL is installed to $(libdir)/../bin by postinstall_cmds -+ postinstall_cmds='base_file=`basename \${file}`~ -+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ -+ dldir=$destdir/`dirname \$dlpath`~ -+ test -d \$dldir || mkdir -p \$dldir~ -+ $install_prog $dir/$dlname \$dldir/$dlname~ -+ chmod a+x \$dldir/$dlname~ -+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then -+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; -+ fi' -+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ -+ dlpath=$dir/\$dldll~ -+ $RM \$dlpath' -+ shlibpath_overrides_runpath=yes +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++# dlopen ++# ------ ++LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ++]) --# Must we lock files when doing compilation ? --need_locks=$lt_need_locks -+ case $host_os in -+ cygwin*) -+ # Cygwin DLLs use 'cyg' prefix rather than 'lib' -+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" -+ ;; -+ mingw* | cegcc*) -+ # MinGW DLLs use traditional 'lib' prefix -+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then -+ # It is most probably a Windows format PATH printed by -+ # mingw gcc, but we are running on Cygwin. Gcc prints its search -+ # path with ; separators, and with drive letters. We can handle the -+ # drive letters (cygwin fileutils understands them), so leave them, -+ # especially as we might pass files found there to a mingw objdump, -+ # which wouldn't understand a cygwinified path. Ahh. -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -+ else -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ fi -+ ;; -+ pw32*) -+ # pw32 DLLs use 'pw' prefix rather than 'lib' -+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -+ ;; -+ esac -+ ;; +- _LT_AC_TAGVAR(archive_cmds, $1)='' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++AU_DEFUN([AC_LIBTOOL_DLOPEN], ++[_LT_SET_OPTION([LT_INIT], [dlopen]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `dlopen' option into LT_INIT's first parameter.]) ++]) --# Do we need the lib prefix for modules? --need_lib_prefix=$need_lib_prefix -+ *) -+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' -+ ;; -+ esac -+ dynamic_linker='Win32 ld.exe' -+ # FIXME: first we should search . and the directory the executable is in -+ shlibpath_var=PATH -+ ;; +- if test "$GCC" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- else +- # We have old collect2 +- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +- fi +- esac +- shared_flag='-shared' +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) --# Do we need a version for libraries? --need_version=$need_version -- --# Whether dlopen is supported. --dlopen_support=$enable_dlopen -+darwin* | rhapsody*) -+ dynamic_linker="$host_os dyld" -+ version_type=darwin -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' -+ soname_spec='${libname}${release}${major}$shared_ext' -+ shlibpath_overrides_runpath=yes -+ shlibpath_var=DYLD_LIBRARY_PATH -+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- # Exported symbols can be pulled into shared objects from archives +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; --# Whether dlopen of programs is supported. --dlopen_self=$enable_dlopen_self -+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" -+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' -+ ;; +- amigaos*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- # see comment about different semantics on the GNU ld section +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; ++# win32-dll ++# --------- ++# Declare package support for building win32 dll's. ++LT_OPTION_DEFINE([LT_INIT], [win32-dll], ++[enable_win32_dll=yes --# Whether dlopen of statically linked programs is supported. --dlopen_self_static=$enable_dlopen_self_static -+dgux*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH +- bsdi4*) +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic +- ;; ++case $host in ++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) ++ AC_CHECK_TOOL(AS, as, false) ++ AC_CHECK_TOOL(DLLTOOL, dlltool, false) ++ AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; ++esac --# Compiler flag to prevent dynamic linking. --link_static_flag=$lt_lt_prog_compiler_static_CXX -+freebsd1*) -+ dynamic_linker=no -+ ;; +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' +- # FIXME: Should let the user specify the lib program. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- ;; ++test -z "$AS" && AS=as ++_LT_DECL([], [AS], [0], [Assembler program])dnl --# Compiler flag to turn off builtin functions. --no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX -+freebsd* | dragonfly*) -+ # DragonFly does not have aout. When/if they implement a new -+ # versioning mechanism, adjust this. -+ if test -x /usr/bin/objformat; then -+ objformat=`/usr/bin/objformat` -+ else -+ case $host_os in -+ freebsd[123]*) objformat=aout ;; -+ *) objformat=elf ;; -+ esac -+ fi -+ version_type=freebsd-$objformat -+ case $version_type in -+ freebsd-elf*) -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -+ need_version=no -+ need_lib_prefix=no -+ ;; -+ freebsd-*) -+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' -+ need_version=yes -+ ;; -+ esac -+ shlibpath_var=LD_LIBRARY_PATH -+ case $host_os in -+ freebsd2*) -+ shlibpath_overrides_runpath=yes -+ ;; -+ freebsd3.[01]* | freebsdelf3.[01]*) -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ ;; -+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ -+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; -+ *) # from 4.6 on, and DragonFly -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ ;; -+ esac -+ ;; +- darwin* | rhapsody*) +- if test "$GXX" = yes ; then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- case "$host_os" in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl --# Compiler flag to allow reflexive dlopens. --export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX -+gnu*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ hardcode_into_libs=yes -+ ;; +- dgux*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++test -z "$OBJDUMP" && OBJDUMP=objdump ++_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl ++])# win32-dll --# Compiler flag to generate shared objects directly from archives. --whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX -+hpux9* | hpux10* | hpux11*) -+ # Give a soname corresponding to the major version so that dld.sl refuses to -+ # link against other versions. -+ version_type=sunos -+ need_lib_prefix=no -+ need_version=no -+ case $host_cpu in -+ ia64*) -+ shrext_cmds='.so' -+ hardcode_into_libs=yes -+ dynamic_linker="$host_os dld.so" -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ if test "X$HPUX_IA64_MODE" = X32; then -+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" -+ else -+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" -+ fi -+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -+ ;; -+ hppa*64*) -+ shrext_cmds='.sl' -+ hardcode_into_libs=yes -+ dynamic_linker="$host_os dld.sl" -+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH -+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" -+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -+ ;; -+ *) -+ shrext_cmds='.sl' -+ dynamic_linker="$host_os dld.sl" -+ shlibpath_var=SHLIB_PATH -+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ ;; -+ esac -+ # HP-UX runs *really* slowly unless shared libraries are mode 555. -+ postinstall_cmds='chmod 555 $lib' -+ ;; +- freebsd1*) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; ++AU_DEFUN([AC_LIBTOOL_WIN32_DLL], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++_LT_SET_OPTION([LT_INIT], [win32-dll]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `win32-dll' option into LT_INIT's first parameter.]) ++]) --# Compiler flag to generate thread-safe objects. --thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX -+interix[3-9]*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) --# Library versioning type. --version_type=$version_type -+irix5* | irix6* | nonstopux*) -+ case $host_os in -+ nonstopux*) version_type=nonstopux ;; +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++# _LT_ENABLE_SHARED([DEFAULT]) ++# ---------------------------- ++# implement the --enable-shared flag, and supports the `shared' and ++# `disable-shared' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_SHARED], ++[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([shared], ++ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], ++ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; + *) -+ if test "$lt_cv_prog_gnu_ld" = yes; then -+ version_type=linux -+ else -+ version_type=irix -+ fi ;; -+ esac -+ need_lib_prefix=no -+ need_version=no -+ soname_spec='${libname}${release}${shared_ext}$major' -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' -+ case $host_os in -+ irix5* | nonstopux*) -+ libsuff= shlibsuff= -+ ;; -+ *) -+ case $LD in # libtool.m4 will add one of these switches to LD -+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") -+ libsuff= shlibsuff= libmagic=32-bit;; -+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") -+ libsuff=32 shlibsuff=N32 libmagic=N32;; -+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") -+ libsuff=64 shlibsuff=64 libmagic=64-bit;; -+ *) libsuff= shlibsuff= libmagic=never-match;; -+ esac -+ ;; -+ esac -+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH -+ shlibpath_overrides_runpath=no -+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" -+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" -+ hardcode_into_libs=yes -+ ;; ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; ++ esac], ++ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) --# Format of library name prefix. --libname_spec=$lt_libname_spec -+# No shared lib support for Linux oldld, aout, or coff. -+linux*oldld* | linux*aout* | linux*coff*) -+ dynamic_linker=no -+ ;; +- hpux9*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_DECL([build_libtool_libs], [enable_shared], [0], ++ [Whether or not to build shared libraries]) ++])# _LT_ENABLE_SHARED --# List of archive names. First name is the real one, the rest are links. --# The last name is the one that the linker finds with -lNAME. --library_names_spec=$lt_library_names_spec -+# This must be Linux ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ # Some binutils ld are patched to set DT_RUNPATH -+ save_LDFLAGS=$LDFLAGS -+ save_libdir=$libdir -+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ -+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- ;; ++LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) --# The coded name of the library, if different from the real name. --soname_spec=$lt_soname_spec -+int -+main () -+{ +- hpux10* | hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case "$host_cpu" in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- ia64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++# Old names: ++AC_DEFUN([AC_ENABLE_SHARED], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ++]) --# Commands used to build and install an old-style archive. --RANLIB=$lt_RANLIB --old_archive_cmds=$lt_old_archive_cmds_CXX --old_postinstall_cmds=$lt_old_postinstall_cmds --old_postuninstall_cmds=$lt_old_postuninstall_cmds -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : -+ shlibpath_overrides_runpath=yes -+fi -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+ LDFLAGS=$save_LDFLAGS -+ libdir=$save_libdir +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- ;; +- *) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++AC_DEFUN([AC_DISABLE_SHARED], ++[_LT_SET_OPTION([LT_INIT], [disable-shared]) ++]) --# Create an old-style archive from a shared archive. --old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX -+ # This implies no fast_install, which is unacceptable. -+ # Some rework will be needed to allow for fast_install -+ # before this can be enabled. -+ hardcode_into_libs=yes +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- ;; +- esac +- fi +- ;; ++AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) ++AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) --# Create a temporary old-style archive to link instead of a shared archive. --old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX -+ # Append ld.so.conf contents to the search path -+ if test -f /etc/ld.so.conf; then -+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` -+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" -+ fi +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_ENABLE_SHARED], []) ++dnl AC_DEFUN([AM_DISABLE_SHARED], []) ++ ++ ++ ++# _LT_ENABLE_STATIC([DEFAULT]) ++# ---------------------------- ++# implement the --enable-static flag, and support the `static' and ++# `disable-static' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_STATIC], ++[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([static], ++ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], ++ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; ++ esac], ++ [enable_static=]_LT_ENABLE_STATIC_DEFAULT) --# Commands used to build and install a shared archive. --archive_cmds=$lt_archive_cmds_CXX --archive_expsym_cmds=$lt_archive_expsym_cmds_CXX --postinstall_cmds=$lt_postinstall_cmds --postuninstall_cmds=$lt_postuninstall_cmds -+ # We used to test for /lib/ld.so.1 and disable shared libraries on -+ # powerpc, because MkLinux only supported shared libraries with the -+ # GNU dynamic linker. Since this was broken with cross compilers, -+ # most powerpc-linux boxes support dynamic linking these days and -+ # people can always --disable-shared, the test was removed, and we -+ # assume the GNU/Linux dynamic linker is in use. -+ dynamic_linker='GNU/Linux ld.so' -+ ;; +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++ _LT_DECL([build_old_libs], [enable_static], [0], ++ [Whether or not to build static libraries]) ++])# _LT_ENABLE_STATIC --# Commands used to build a loadable module (assumed same as above if empty) --module_cmds=$lt_module_cmds_CXX --module_expsym_cmds=$lt_module_expsym_cmds_CXX -+netbsdelf*-gnu) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ dynamic_linker='NetBSD ld.elf_so' -+ ;; +- newsos6) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) --# Commands to strip libraries. --old_striplib=$lt_old_striplib --striplib=$lt_striplib -+netbsd*) -+ version_type=sunos -+ need_lib_prefix=no -+ need_version=no -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -+ dynamic_linker='NetBSD (a.out) ld.so' -+ else -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ dynamic_linker='NetBSD ld.elf_so' -+ fi -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ ;; +- openbsd*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- else +- case $host_os in +- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- ;; ++# Old names: ++AC_DEFUN([AC_ENABLE_STATIC], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ++]) --# Dependencies to place before the objects being linked to create a --# shared library. --predep_objects=$lt_predep_objects_CXX -+newsos6) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ ;; +- os2*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; ++AC_DEFUN([AC_DISABLE_STATIC], ++[_LT_SET_OPTION([LT_INIT], [disable-static]) ++]) --# Dependencies to place after the objects being linked to create a --# shared library. --postdep_objects=$lt_postdep_objects_CXX -+*nto* | *qnx*) -+ version_type=qnx -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ dynamic_linker='ldqnx.so' -+ ;; +- osf3*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; ++AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) ++AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) --# Dependencies to place before the objects being linked to create a --# shared library. --predeps=$lt_predeps_CXX -+openbsd*) -+ version_type=sunos -+ sys_lib_dlsearch_path_spec="/usr/lib" -+ need_lib_prefix=no -+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. -+ case $host_os in -+ openbsd3.3 | openbsd3.3.*) need_version=yes ;; -+ *) need_version=no ;; -+ esac -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ case $host_os in -+ openbsd2.[89] | openbsd2.[89].*) -+ shlibpath_overrides_runpath=no -+ ;; -+ *) -+ shlibpath_overrides_runpath=yes -+ ;; -+ esac -+ else -+ shlibpath_overrides_runpath=yes -+ fi -+ ;; +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- else +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_ENABLE_STATIC], []) ++dnl AC_DEFUN([AM_DISABLE_STATIC], []) + +- # Both c and cxx compiler support -rpath directly +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; + +- sco3.2v5*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ;; + +- solaris*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- case $host_os in +- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; +- esac +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++# _LT_ENABLE_FAST_INSTALL([DEFAULT]) ++# ---------------------------------- ++# implement the --enable-fast-install flag, and support the `fast-install' ++# and `disable-fast-install' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_FAST_INSTALL], ++[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([fast-install], ++ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], ++ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; ++ esac], ++ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) --# Dependencies to place after the objects being linked to create a --# shared library. --postdeps=$lt_postdeps_CXX -+os2*) -+ libname_spec='$name' -+ shrext_cmds=".dll" -+ need_lib_prefix=no -+ library_names_spec='$libname${shared_ext} $libname.a' -+ dynamic_linker='OS/2 ld.exe' -+ shlibpath_var=LIBPATH -+ ;; +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++_LT_DECL([fast_install], [enable_fast_install], [0], ++ [Whether or not to optimize for fast installation])dnl ++])# _LT_ENABLE_FAST_INSTALL ++ ++LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) ++ ++# Old names: ++AU_DEFUN([AC_ENABLE_FAST_INSTALL], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `fast-install' option into LT_INIT's first parameter.]) ++]) --# The library search path used internally by the compiler when linking --# a shared library. --compiler_lib_search_path=$lt_compiler_lib_search_path_CXX -+osf3* | osf4* | osf5*) -+ version_type=osf -+ need_lib_prefix=no -+ need_version=no -+ soname_spec='${libname}${release}${shared_ext}$major' -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" -+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" -+ ;; +- sysv4) +- case $host_vendor in +- sni) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- ;; +- motorola) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++AU_DEFUN([AC_DISABLE_FAST_INSTALL], ++[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `disable-fast-install' option into LT_INIT's first parameter.]) ++]) --# Method to check whether dependent libraries are shared objects. --deplibs_check_method=$lt_deplibs_check_method -+rdos*) -+ dynamic_linker=no -+ ;; +- sysv4.3*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' +- ;; ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) ++dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) --# Command to use when deplibs_check_method == file_magic. --file_magic_cmd=$lt_file_magic_cmd -+solaris*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ # ldd complains unless libraries are executable -+ postinstall_cmds='chmod +x $lib' -+ ;; +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- _LT_AC_TAGVAR(ld_shlibs, $1)=yes +- fi +- ;; --# Flag that allows shared libraries with undefined symbols to be built. --allow_undefined_flag=$lt_allow_undefined_flag_CXX -+sunos4*) -+ version_type=sunos -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ if test "$with_gnu_ld" = yes; then -+ need_lib_prefix=no -+ fi -+ need_version=yes -+ ;; +- sysv4.2uw2*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; ++# _LT_WITH_PIC([MODE]) ++# -------------------- ++# implement the --with-pic flag, and support the `pic-only' and `no-pic' ++# LT_INIT options. ++# MODE is either `yes' or `no'. If omitted, it defaults to `both'. ++m4_define([_LT_WITH_PIC], ++[AC_ARG_WITH([pic], ++ [AS_HELP_STRING([--with-pic], ++ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], ++ [pic_mode="$withval"], ++ [pic_mode=default]) --# Flag that forces no undefined symbols. --no_undefined_flag=$lt_no_undefined_flag_CXX -+sysv4 | sysv4.3*) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ case $host_vendor in -+ sni) -+ shlibpath_overrides_runpath=no -+ need_lib_prefix=no -+ runpath_var=LD_RUN_PATH -+ ;; -+ siemens) -+ need_lib_prefix=no -+ ;; -+ motorola) -+ need_lib_prefix=no -+ need_version=no -+ shlibpath_overrides_runpath=no -+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' -+ ;; -+ esac -+ ;; +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- runpath_var='LD_RUN_PATH' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) --# Commands used to finish a libtool library installation in a directory. --finish_cmds=$lt_finish_cmds -+sysv4*MP*) -+ if test -d /usr/nec ;then -+ version_type=linux -+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' -+ soname_spec='$libname${shared_ext}.$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ fi -+ ;; +- sysv5*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var='LD_RUN_PATH' +- ;; ++_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ++])# _LT_WITH_PIC --# Same as above, but a single script fragment to be evaled but not shown. --finish_eval=$lt_finish_eval -+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) -+ version_type=freebsd-elf -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ if test "$with_gnu_ld" = yes; then -+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' -+ else -+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' -+ case $host_os in -+ sco3.2v5*) -+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" -+ ;; -+ esac -+ fi -+ sys_lib_dlsearch_path_spec='/usr/lib' -+ ;; +- uts4*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) --# Take the output of nm and produce a listing of raw symbols and C names. --global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -+tpf*) -+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; +- *) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- fi ++# Old name: ++AU_DEFUN([AC_LIBTOOL_PICMODE], ++[_LT_SET_OPTION([LT_INIT], [pic-only]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `pic-only' option into LT_INIT's first parameter.]) + ]) +-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no --# Transform the output of nm in a proper C declaration --global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -+uts4*) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ ;; +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) --# Transform the output of nm in a C name address pair --global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -+*) -+ dynamic_linker=no -+ ;; -+esac -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -+$as_echo "$dynamic_linker" >&6; } -+test "$dynamic_linker" = no && can_build_shared=no ++ ++m4_define([_LTDL_MODE], []) ++LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], ++ [m4_define([_LTDL_MODE], [nonrecursive])]) ++LT_OPTION_DEFINE([LTDL_INIT], [recursive], ++ [m4_define([_LTDL_MODE], [recursive])]) ++LT_OPTION_DEFINE([LTDL_INIT], [subproject], ++ [m4_define([_LTDL_MODE], [subproject])]) ++ ++m4_define([_LTDL_TYPE], []) ++LT_OPTION_DEFINE([LTDL_INIT], [installable], ++ [m4_define([_LTDL_TYPE], [installable])]) ++LT_OPTION_DEFINE([LTDL_INIT], [convenience], ++ [m4_define([_LTDL_TYPE], [convenience])]) ++ ++# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- + # +-# Do we need to explicitly link libc? ++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gary V. Vaughan, 2004 + # +-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +-x|xyes) +- # Assume -lc should be added +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. --# This is the shared library runtime path variable. --runpath_var=$runpath_var -+variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -+if test "$GCC" = yes; then -+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -+fi +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $_LT_AC_TAGVAR(archive_cmds, $1) in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- AC_MSG_CHECKING([whether -lc should be explicitly linked in]) +- $rm conftest* +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++# serial 6 ltsugar.m4 --# This is the shared library path variable. --shlibpath_var=$shlibpath_var -+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then -+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -+fi -+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then -+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -+fi +- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)= +- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) +- then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- else +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- fi +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) +- ;; +- esac +- fi +- ;; +-esac +-])# AC_LIBTOOL_PROG_LD_SHLIBS ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) --# Is shlibpath searched before the hard-coded library search path? --shlibpath_overrides_runpath=$shlibpath_overrides_runpath --# How to hardcode a shared library path into an executable. --hardcode_action=$hardcode_action_CXX +-# _LT_AC_FILE_LTDLL_C +-# ------------------- +-# Be careful that the start marker always follows a newline. +-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +-# /* ltdll.c starts here */ +-# #define WIN32_LEAN_AND_MEAN +-# #include +-# #undef WIN32_LEAN_AND_MEAN +-# #include +-# +-# #ifndef __CYGWIN__ +-# # ifdef __CYGWIN32__ +-# # define __CYGWIN__ __CYGWIN32__ +-# # endif +-# #endif +-# +-# #ifdef __cplusplus +-# extern "C" { +-# #endif +-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +-# #ifdef __cplusplus +-# } +-# #endif +-# +-# #ifdef __CYGWIN__ +-# #include +-# DECLARE_CYGWIN_DLL( DllMain ); +-# #endif +-# HINSTANCE __hDllInstance_base; +-# +-# BOOL APIENTRY +-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +-# { +-# __hDllInstance_base = hInst; +-# return TRUE; +-# } +-# /* ltdll.c ends here */ +-])# _LT_AC_FILE_LTDLL_C ++# lt_join(SEP, ARG1, [ARG2...]) ++# ----------------------------- ++# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their ++# associated separator. ++# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier ++# versions in m4sugar had bugs. ++m4_define([lt_join], ++[m4_if([$#], [1], [], ++ [$#], [2], [[$2]], ++ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) ++m4_define([_lt_join], ++[m4_if([$#$2], [2], [], ++ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) --# Whether we should hardcode library paths into libraries. --hardcode_into_libs=$hardcode_into_libs --# Flag to hardcode \$libdir into a binary during linking. --# This must work even if \$libdir does not exist. --hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +-# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +-# --------------------------------- +-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) ++# lt_car(LIST) ++# lt_cdr(LIST) ++# ------------ ++# Manipulate m4 lists. ++# These macros are necessary as long as will still need to support ++# Autoconf-2.59 which quotes differently. ++m4_define([lt_car], [[$1]]) ++m4_define([lt_cdr], ++[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], ++ [$#], 1, [], ++ [m4_dquote(m4_shift($@))])]) ++m4_define([lt_unquote], $1) ++ ++ ++# lt_append(MACRO-NAME, STRING, [SEPARATOR]) ++# ------------------------------------------ ++# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. ++# Note that neither SEPARATOR nor STRING are expanded; they are appended ++# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). ++# No SEPARATOR is output if MACRO-NAME was previously undefined (different ++# than defined and empty). ++# ++# This macro is needed until we can rely on Autoconf 2.62, since earlier ++# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. ++m4_define([lt_append], ++[m4_define([$1], ++ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) --# If ld is used when linking, flag to hardcode \$libdir into --# a binary during linking. This must work even if \$libdir does --# not exist. --hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX --# Whether we need a single -rpath flag with a separated argument. --hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX +-# old names +-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) --# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the --# resulting binary. --hardcode_direct=$hardcode_direct_CXX +-# This is just to silence aclocal about the macro not being used +-ifelse([AC_DISABLE_FAST_INSTALL]) ++# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) ++# ---------------------------------------------------------- ++# Produce a SEP delimited list of all paired combinations of elements of ++# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list ++# has the form PREFIXmINFIXSUFFIXn. ++# Needed until we can rely on m4_combine added in Autoconf 2.62. ++m4_define([lt_combine], ++[m4_if(m4_eval([$# > 3]), [1], ++ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl ++[[m4_foreach([_Lt_prefix], [$2], ++ [m4_foreach([_Lt_suffix], ++ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, ++ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) ++ ++ ++# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) ++# ----------------------------------------------------------------------- ++# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited ++# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. ++m4_define([lt_if_append_uniq], ++[m4_ifdef([$1], ++ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], ++ [lt_append([$1], [$2], [$3])$4], ++ [$5])], ++ [lt_append([$1], [$2], [$3])$4])]) --# Set to yes if using the -LDIR flag during linking hardcodes DIR into the --# resulting binary. --hardcode_minus_L=$hardcode_minus_L_CXX +-AC_DEFUN([LT_AC_PROG_GCJ], +-[AC_CHECK_TOOL(GCJ, gcj, no) +- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" +- AC_SUBST(GCJFLAGS) +-]) --# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into --# the resulting binary. --hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX +-AC_DEFUN([LT_AC_PROG_RC], +-[AC_CHECK_TOOL(RC, windres, no) +-]) ++# lt_dict_add(DICT, KEY, VALUE) ++# ----------------------------- ++m4_define([lt_dict_add], ++[m4_define([$1($2)], [$3])]) --# Set to yes if building a shared library automatically hardcodes DIR into the library --# and all subsequent libraries and executables linked against it. --hardcode_automatic=$hardcode_automatic_CXX +-# NOTE: This macro has been submitted for inclusion into # +-# GNU Autoconf as AC_PROG_SED. When it is available in # +-# a released version of Autoconf we should remove this # +-# macro and use it instead. # +-# LT_AC_PROG_SED +-# -------------- +-# Check for a fully-functional sed program, that truncates +-# as few characters as possible. Prefer GNU sed if found. +-AC_DEFUN([LT_AC_PROG_SED], +-[AC_MSG_CHECKING([for a sed that does not truncate output]) +-AC_CACHE_VAL(lt_cv_path_SED, +-[# Loop through the user's path and test for sed and gsed. +-# Then use that list of sed's as ones to test for truncation. +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for lt_ac_prog in sed gsed; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then +- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" +- fi +- done +- done +-done +-lt_ac_max=0 +-lt_ac_count=0 +-# Add /usr/xpg4/bin/sed as it is typically found on Solaris +-# along with /bin/sed that truncates output. +-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do +- test ! -f $lt_ac_sed && break +- cat /dev/null > conftest.in +- lt_ac_count=0 +- echo $ECHO_N "0123456789$ECHO_C" >conftest.in +- # Check for GNU sed and select it if it is found. +- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then +- lt_cv_path_SED=$lt_ac_sed +- break +- fi +- while true; do +- cat conftest.in conftest.in >conftest.tmp +- mv conftest.tmp conftest.in +- cp conftest.in conftest.nl +- echo >>conftest.nl +- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break +- cmp -s conftest.out conftest.nl || break +- # 10000 chars as input seems more than enough +- test $lt_ac_count -gt 10 && break +- lt_ac_count=`expr $lt_ac_count + 1` +- if test $lt_ac_count -gt $lt_ac_max; then +- lt_ac_max=$lt_ac_count +- lt_cv_path_SED=$lt_ac_sed +- fi +- done +-done +-SED=$lt_cv_path_SED ++ ++# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) ++# -------------------------------------------- ++m4_define([lt_dict_add_subkey], ++[m4_define([$1($2:$3)], [$4])]) ++ ++ ++# lt_dict_fetch(DICT, KEY, [SUBKEY]) ++# ---------------------------------- ++m4_define([lt_dict_fetch], ++[m4_ifval([$3], ++ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), ++ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) ++ ++ ++# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) ++# ----------------------------------------------------------------- ++m4_define([lt_if_dict_fetch], ++[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], ++ [$5], ++ [$6])]) ++ ++ ++# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) ++# -------------------------------------------------------------- ++m4_define([lt_dict_filter], ++[m4_if([$5], [], [], ++ [lt_join(m4_quote(m4_default([$4], [[, ]])), ++ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), ++ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl + ]) +-AC_MSG_RESULT([$SED]) ++ ++# ltversion.m4 -- version numbers -*- Autoconf -*- ++# ++# Copyright (C) 2004 Free Software Foundation, Inc. ++# Written by Scott James Remnant, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# Generated from ltversion.in. ++ ++# serial 3017 ltversion.m4 ++# This file is part of GNU Libtool ++ ++m4_define([LT_PACKAGE_VERSION], [2.2.6b]) ++m4_define([LT_PACKAGE_REVISION], [1.3017]) ++ ++AC_DEFUN([LTVERSION_VERSION], ++[macro_version='2.2.6b' ++macro_revision='1.3017' ++_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) ++_LT_DECL(, macro_revision, 0) + ]) --# Variables whose values should be saved in libtool wrapper scripts and --# restored at relink time. --variables_saved_for_relink="$variables_saved_for_relink" +-# -*- Autoconf -*- +-# Copyright (C) 2002, 2003 Free Software Foundation, Inc. +-# Generated from amversion.in; do not edit by hand. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- ++# ++# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. ++# Written by Scott James Remnant, 2004. ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. --# Whether libtool must link a program against all its dependency libraries. --link_all_deplibs=$link_all_deplibs_CXX +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# serial 4 lt~obsolete.m4 --# Compile-time system search path for libraries --sys_lib_search_path_spec=$lt_sys_lib_search_path_spec +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ++# These exist entirely to fool aclocal when bootstrapping libtool. ++# ++# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) ++# which have later been changed to m4_define as they aren't part of the ++# exported API, or moved to Autoconf or Automake where they belong. ++# ++# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN ++# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us ++# using a macro with the same name in our local m4/libtool.m4 it'll ++# pull the old libtool.m4 in (it doesn't see our shiny new m4_define ++# and doesn't know about Autoconf macros at all.) ++# ++# So we provide this file, which has a silly filename so it's always ++# included after everything else. This provides aclocal with the ++# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything ++# because those macros already exist, or will be overwritten later. ++# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. ++# ++# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. ++# Yes, that means every name once taken will need to remain here until ++# we give up compatibility with versions before 1.7, at which point ++# we need to keep only those names which we still refer to. ++ ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) ++ ++m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) ++m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) ++m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) ++m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) ++m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) ++m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) ++m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) ++m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) ++m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) ++m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) ++m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) ++m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) ++m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) ++m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) ++m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) ++m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) ++m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) ++m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) ++m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) ++m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) ++m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) ++m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) ++m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) ++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) ++m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) ++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) ++m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) ++m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) ++m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) ++m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) ++m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) ++m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) ++m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) ++m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) ++m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) ++m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) ++m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) ++m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) ++m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) ++m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) ++m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) ++m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) ++m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) ++m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) ++m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) ++ ++# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. --# Run-time system search path for libraries --sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + # AM_AUTOMAKE_VERSION(VERSION) + # ---------------------------- + # Automake X.Y traces this macro to ensure aclocal.m4 has been + # generated from the m4 files accompanying Automake X.Y. +-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) ++# (This private macro should not be called outside this file.) ++AC_DEFUN([AM_AUTOMAKE_VERSION], ++[am__api_version='1.11' ++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to ++dnl require some minimum version. Point them to the right macro. ++m4_if([$1], [1.11.1], [], ++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ++]) ++ ++# _AM_AUTOCONF_VERSION(VERSION) ++# ----------------------------- ++# aclocal traces this macro to find the Autoconf version. ++# This is a private macro too. Using m4_define simplifies ++# the logic in aclocal, which can simply ignore this definition. ++m4_define([_AM_AUTOCONF_VERSION], []) --# Fix the shell variable \$srcfile for the compiler. --fix_srcfile_path="$fix_srcfile_path_CXX" + # AM_SET_CURRENT_AUTOMAKE_VERSION + # ------------------------------- +-# Call AM_AUTOMAKE_VERSION so it can be traced. +-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +- [AM_AUTOMAKE_VERSION([1.9.2])]) +- +-# AM_AUX_DIR_EXPAND +- +-# Copyright (C) 2001, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. ++# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. ++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], ++[AM_AUTOMAKE_VERSION([1.11.1])dnl ++m4_ifndef([AC_AUTOCONF_VERSION], ++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl ++_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) --# Set to yes if exported symbols are required. --always_export_symbols=$always_export_symbols_CXX +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# AM_AUX_DIR_EXPAND -*- Autoconf -*- --# The commands to list exported symbols. --export_symbols_cmds=$lt_export_symbols_cmds_CXX +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. --# The commands to extract the exported symbol list from a shared archive. --extract_expsyms_cmds=$lt_extract_expsyms_cmds + # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets + # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +@@ -6031,26 +8074,16 @@ AC_PREREQ([2.50])dnl + am_aux_dir=`cd $ac_aux_dir && pwd` + ]) --# Symbols that should not be listed in the preloaded symbols. --exclude_expsyms=$lt_exclude_expsyms_CXX +-# AM_CONDITIONAL -*- Autoconf -*- +- +-# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# AM_CONDITIONAL -*- Autoconf -*- --# Symbols that must always be exported. --include_expsyms=$lt_include_expsyms_CXX +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. --# ### END LIBTOOL TAG CONFIG: $tagname +-# serial 6 ++# serial 9 --__EOF__ + # AM_CONDITIONAL(NAME, SHELL-CONDITION) + # ------------------------------------- +@@ -6059,8 +8092,11 @@ AC_DEFUN([AM_CONDITIONAL], + [AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +-AC_SUBST([$1_TRUE]) +-AC_SUBST([$1_FALSE]) ++AC_SUBST([$1_TRUE])dnl ++AC_SUBST([$1_FALSE])dnl ++_AM_SUBST_NOTMAKE([$1_TRUE])dnl ++_AM_SUBST_NOTMAKE([$1_FALSE])dnl ++m4_define([_AM_COND_VALUE_$1], [$2])dnl + if $2; then + $1_TRUE= + $1_FALSE='#' +@@ -6074,26 +8110,14 @@ AC_CONFIG_COMMANDS_PRE( + Usually this means the macro was only invoked conditionally.]]) + fi])]) +-# serial 7 -*- Autoconf -*- +- +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 + # Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. --else -- # If there is no Makefile yet, we rely on a make rule to execute -- # `config.status --recheck' to rerun these tests and create the -- # libtool script then. -- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` -- if test -f "$ltmain_in"; then -- test -f Makefile && make "$ltmain" -- fi --fi +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- ++# serial 10 + # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be + # written in clear, in which case automake, when reading aclocal.m4, +@@ -6102,7 +8126,6 @@ fi])]) + # CC etc. in the Makefile, will ask for an AC_PROG_CC use... --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu --CC=$lt_save_CC --LDCXX=$LD --LD=$lt_save_LD --GCC=$lt_save_GCC --with_gnu_ldcxx=$with_gnu_ld --with_gnu_ld=$lt_save_with_gnu_ld --lt_cv_path_LDCXX=$lt_cv_path_LD --lt_cv_path_LD=$lt_save_path_LD --lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld --lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +- + # _AM_DEPENDENCIES(NAME) + # ---------------------- + # See how the compiler implements dependency checking. +@@ -6122,6 +8145,7 @@ AC_REQUIRE([AM_DEP_TRACK])dnl + ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) -- else -- tagname="" -- fi -- ;; +@@ -6150,6 +8174,16 @@ AC_CACHE_CHECK([dependency style of $dep + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*$[a-zA-Z0-9]*$)$/\1/p'] < ./depcomp` + fi ++ am__universal=false ++ m4_case([$1], [CC], ++ [case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac], ++ [CXX], ++ [case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac]) ++ + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and +@@ -6167,7 +8201,17 @@ AC_CACHE_CHECK([dependency style of $dep + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf -- F77) -- if test -n "$F77" && test "X$F77" != "Xno"; then ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" + case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested +@@ -6177,18 +8221,23 @@ AC_CACHE_CHECK([dependency style of $dep + break + fi + ;; ++ msvisualcpp | msvcmsys) ++ # This compiler won't grok `-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; + none) break ;; + esac +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. + if depmode=$depmode \ +- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message +@@ -6239,72 +8288,74 @@ if test "x$enable_dependency_tracking" ! + AMDEPBACKSLASH='\' + fi + AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +-AC_SUBST([AMDEPBACKSLASH]) ++AC_SUBST([AMDEPBACKSLASH])dnl ++_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl + ]) --ac_ext=f --ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' --ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_f77_compiler_gnu +-# Generate code to set up dependency tracking. -*- Autoconf -*- - +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +-# Free Software Foundation, Inc. - --archive_cmds_need_lc_F77=no --allow_undefined_flag_F77= --always_export_symbols_F77=no --archive_expsym_cmds_F77= --export_dynamic_flag_spec_F77= --hardcode_direct_F77=no --hardcode_libdir_flag_spec_F77= --hardcode_libdir_flag_spec_ld_F77= --hardcode_libdir_separator_F77= --hardcode_minus_L_F77=no --hardcode_automatic_F77=no --module_cmds_F77= --module_expsym_cmds_F77= --link_all_deplibs_F77=unknown --old_archive_cmds_F77=$old_archive_cmds --no_undefined_flag_F77= --whole_archive_flag_spec_F77= --enable_shared_with_static_runtimes_F77=no - --# Source file extension for f77 test sources. --ac_ext=f - --# Object file extension for compiled f77 test sources. --objext=o --objext_F77=$objext - --# Code to be used in simple compile tests --lt_simple_compile_test_code=" subroutine t\n return\n end\n" - --# Code to be used in simple link tests --lt_simple_link_test_code=" program t\n end\n" +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++# Generate code to set up dependency tracking. -*- Autoconf -*- --# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. --# If no C compiler was specified, use CC. --LTCC=${LTCC-"$CC"} +-#serial 2 ++#serial 5 --# Allow CC to be a program name with arguments. --compiler=$CC + # _AM_OUTPUT_DEPENDENCY_COMMANDS + # ------------------------------ + AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +-[for mf in $CONFIG_FILES; do +- # Strip MF so we end up with the name of the file. +- mf=`echo "$mf" | sed -e 's/:.*$//'` +- # Check whether this is an Automake generated Makefile or not. +- # We used to match only the files named `Makefile.in', but +- # some people rename them; so instead we look at the file content. +- # Grep'ing the first line is not enough: some people post-process +- # each Makefile.in and add a new line on top of each file to say so. +- # So let's grep whole file. +- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then +- dirpart=`AS_DIRNAME("$mf")` +- else +- continue +- fi +- # Extract the definition of DEPDIR, am__include, and am__quote +- # from the Makefile without running `make'. +- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` +- test -z "$DEPDIR" && continue +- am__include=`sed -n 's/^am__include = //p' < "$mf"` +- test -z "am__include" && continue +- am__quote=`sed -n 's/^am__quote = //p' < "$mf"` +- # When using ansi2knr, U may be empty or an underscore; expand it +- U=`sed -n 's/^U = //p' < "$mf"` +- # Find all dependency output files, they are included files with +- # $(DEPDIR) in their names. We invoke sed twice because it is the +- # simplest approach to changing $(DEPDIR) to its actual value in the +- # expansion. +- for file in `sed -n " +- s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \ +- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do +- # Make sure the directory exists. +- test -f "$dirpart/$file" && continue +- fdir=`AS_DIRNAME(["$file"])` +- AS_MKDIR_P([$dirpart/$fdir]) +- # echo "creating $dirpart/$file" +- echo '# dummy' > "$dirpart/$file" ++[{ ++ # Autoconf 2.62 quotes --file arguments for eval, but not when files ++ # are listed without --file. Let's play safe and only enable the eval ++ # if we detect the quoting. ++ case $CONFIG_FILES in ++ *\'*) eval set x "$CONFIG_FILES" ;; ++ *) set x $CONFIG_FILES ;; ++ esac ++ shift ++ for mf ++ do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then ++ dirpart=`AS_DIRNAME("$mf")` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`AS_DIRNAME(["$file"])` ++ AS_MKDIR_P([$dirpart/$fdir]) ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done + done +-done ++} + ])# _AM_OUTPUT_DEPENDENCY_COMMANDS --# Allow CC to be a program name with arguments. --lt_save_CC="$CC" --CC=${F77-"f77"} --compiler=$CC --compiler_F77=$CC --cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +@@ -6321,55 +8372,20 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) + ]) --echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 --echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 --echo "$as_me:$LINENO: result: $can_build_shared" >&5 --echo "${ECHO_T}$can_build_shared" >&6 +-# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- - --echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 --echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 --test "$can_build_shared" = "no" && enable_shared=no +-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. - --# On AIX, shared libraries and static libraries use the same namespace, and --# are all built from PIC. --case "$host_os" in --aix3*) -- test "$enable_shared" = yes && enable_static=no -- if test -n "$RANLIB"; then -- archive_cmds="$archive_cmds~\$RANLIB \$lib" -- postinstall_cmds='$RANLIB $lib' -- fi -- ;; --aix4* | aix5*) -- test "$enable_shared" = yes && enable_static=no -- ;; --esac --echo "$as_me:$LINENO: result: $enable_shared" >&5 --echo "${ECHO_T}$enable_shared" >&6 - --echo "$as_me:$LINENO: checking whether to build static libraries" >&5 --echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 --# Make sure either enable_shared or enable_static is yes. --test "$enable_shared" = yes || enable_static=yes --echo "$as_me:$LINENO: result: $enable_static" >&5 --echo "${ECHO_T}$enable_static" >&6 - --test "$ld_shlibs_F77" = no && can_build_shared=no - --GCC_F77="$G77" --LD_F77="$LD" - --lt_prog_compiler_wl_F77= --lt_prog_compiler_pic_F77= --lt_prog_compiler_static_F77= - --echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 --echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 - -- if test "$GCC" = yes; then -- lt_prog_compiler_wl_F77='-Wl,' -- lt_prog_compiler_static_F77='-static' +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# Do all the work for Automake. -*- Autoconf -*- -- case $host_os in -- aix*) -- # All AIX code is PIC. -- if test "$host_cpu" = ia64; then -- # AIX 5 now supports IA64 processor -- lt_prog_compiler_static_F77='-Bstatic' -- fi -- ;; +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- +-# serial 7 +- +-# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, ++# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. -- amigaos*) -- # FIXME: we need at least 68020 code to build shared libraries, but -- # adding the `-m68020' flag to GCC prevents building anything better, -- # like `-m68040'. -- lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' -- ;; +-# Do all the work for Automake. -*- Autoconf -*- ++# serial 16 -- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) -- # PIC is the default for these OSes. -- ;; +-# This macro actually does too much some checks are only needed if ++# This macro actually does too much. Some checks are only needed if + # your package does certain things. But this isn't really a big deal. -- mingw* | pw32* | os2*) -- # This hack is so that the source file can tell whether it is being -- # built for inclusion in a dll (and should export symbols for example). -- lt_prog_compiler_pic_F77='-DDLL_EXPORT' -- ;; +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 +-# Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- +-# serial 11 +- + # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) + # AM_INIT_AUTOMAKE([OPTIONS]) + # ----------------------------------------------- +@@ -6382,16 +8398,20 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_ + # arguments mandatory, and then we can depend on a new Autoconf + # release and drop the old call support. + AC_DEFUN([AM_INIT_AUTOMAKE], +-[AC_PREREQ([2.58])dnl ++[AC_PREREQ([2.62])dnl + dnl Autoconf wants to disallow AM_ names. We explicitly allow + dnl the ones we care about. + m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl + AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl + AC_REQUIRE([AC_PROG_INSTALL])dnl +-# test to see if srcdir already configured +-if test "`cd $srcdir && pwd`" != "`pwd`" && +- test -f $srcdir/config.status; then +- AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++ fi + fi -- darwin* | rhapsody*) -- # PIC is the default on this platform -- # Common symbols not allowed in MH_DYLIB files -- lt_prog_compiler_pic_F77='-fno-common' -- ;; + # test whether we have cygpath +@@ -6411,6 +8431,9 @@ m4_ifval([$2], + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], + [_AM_SET_OPTIONS([$1])dnl ++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. ++m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, ++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl -- msdosdjgpp*) -- # Just because we use GCC doesn't mean we suddenly get shared libraries -- # on systems that don't support them. -- lt_prog_compiler_can_build_shared_F77=no -- enable_shared=no -- ;; +@@ -6426,8 +8449,8 @@ AM_MISSING_PROG(AUTOCONF, autoconf) + AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) + AM_MISSING_PROG(AUTOHEADER, autoheader) + AM_MISSING_PROG(MAKEINFO, makeinfo) +-AM_PROG_INSTALL_SH +-AM_PROG_INSTALL_STRIP ++AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl + AC_REQUIRE([AM_PROG_MKDIR_P])dnl + # We need awk for the "check" target. The system "awk" is bad on + # some platforms. +@@ -6435,20 +8458,37 @@ AC_REQUIRE([AC_PROG_AWK])dnl + AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AM_SET_LEADING_DOT])dnl + _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], +- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], +- [_AM_PROG_TAR([v7])])]) ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) + _AM_IF_OPTION([no-dependencies],, + [AC_PROVIDE_IFELSE([AC_PROG_CC], +- [_AM_DEPENDENCIES(CC)], +- [define([AC_PROG_CC], +- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl + AC_PROVIDE_IFELSE([AC_PROG_CXX], +- [_AM_DEPENDENCIES(CXX)], +- [define([AC_PROG_CXX], +- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_OBJC], ++ [_AM_DEPENDENCIES(OBJC)], ++ [define([AC_PROG_OBJC], ++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl + ]) ++_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl ++dnl The `parallel-tests' driver may need to know about EXEEXT, so add the ++dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro ++dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. ++AC_CONFIG_COMMANDS_PRE(dnl ++[m4_provide_if([_AM_COMPILER_EXEEXT], ++ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + ]) -- sysv4*MP*) -- if test -d /usr/nec; then -- lt_prog_compiler_pic_F77=-Kconform_pic -- fi -- ;; ++dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not ++dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further ++dnl mangled by Autoconf and run in a shell conditional statement. ++m4_define([_AC_COMPILER_EXEEXT], ++m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) ++ -- hpux*) -- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -- # not for PA HP-UX. -- case "$host_cpu" in -- hppa*64*|ia64*) -- # +Z the default -- ;; -- *) -- lt_prog_compiler_pic_F77='-fPIC' -- ;; -- esac -- ;; + # When config.status generates a header, we must update the stamp-h file. + # This file resides in the same directory as the config header +@@ -6459,62 +8499,46 @@ AC_PROVIDE_IFELSE([AC_PROG_CXX], + # our stamp files there. + AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], + [# Compute $1's index in $config_headers. ++_am_arg=$1 + _am_stamp_count=1 + for _am_header in $config_headers :; do + case $_am_header in +- $1 | $1:* ) ++ $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac + done +-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) ++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) ++ ++# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. -- *) -- lt_prog_compiler_pic_F77='-fPIC' -- ;; -- esac -- else -- # PORTME Check for flag to pass linker flags through the system compiler. -- case $host_os in -- aix*) -- lt_prog_compiler_wl_F77='-Wl,' -- if test "$host_cpu" = ia64; then -- # AIX 5 now supports IA64 processor -- lt_prog_compiler_static_F77='-Bstatic' -- else -- lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' -- fi -- ;; + # AM_PROG_INSTALL_SH + # ------------------ + # Define $install_sh. +- +-# Copyright (C) 2001, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- + AC_DEFUN([AM_PROG_INSTALL_SH], + [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-install_sh=${install_sh-"$am_aux_dir/install-sh"} ++if test x"${install_sh}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; ++ *) ++ install_sh="\${SHELL} $am_aux_dir/install-sh" ++ esac ++fi + AC_SUBST(install_sh)]) -- mingw* | pw32* | os2*) -- # This hack is so that the source file can tell whether it is being -- # built for inclusion in a dll (and should export symbols for example). -- lt_prog_compiler_pic_F77='-DDLL_EXPORT' -- ;; +-# -*- Autoconf -*- +-# Copyright (C) 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. -- hpux9* | hpux10* | hpux11*) -- lt_prog_compiler_wl_F77='-Wl,' -- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -- # not for PA HP-UX. -- case "$host_cpu" in -- hppa*64*|ia64*) -- # +Z the default -- ;; -- *) -- lt_prog_compiler_pic_F77='+Z' -- ;; -- esac -- # Is there a better lt_prog_compiler_static that works with the bundled CC? -- lt_prog_compiler_static_F77='${wl}-a ${wl}archive' -- ;; +-# serial 1 ++# serial 2 -- irix5* | irix6* | nonstopux*) -- lt_prog_compiler_wl_F77='-Wl,' -- # PIC (with -KPIC) is the default. -- lt_prog_compiler_static_F77='-non_shared' -- ;; + # Check whether the underlying file-system supports filenames + # with a leading dot. For instance MS-DOS doesn't. +@@ -6529,26 +8553,15 @@ fi + rmdir .tst 2>/dev/null + AC_SUBST([am__leading_dot])]) -- newsos6) -- lt_prog_compiler_pic_F77='-KPIC' -- lt_prog_compiler_static_F77='-Bstatic' -- ;; +-# Check to see how 'make' treats includes. -*- Autoconf -*- +- +-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. ++# Check to see how 'make' treats includes. -*- Autoconf -*- -- linux*) -- case $CC in -- icc* | ecc*) -- lt_prog_compiler_wl_F77='-Wl,' -- lt_prog_compiler_pic_F77='-KPIC' -- lt_prog_compiler_static_F77='-static' -- ;; -- ccc*) -- lt_prog_compiler_wl_F77='-Wl,' -- # All Alpha code is PIC. -- lt_prog_compiler_static_F77='-non_shared' -- ;; -- esac -- ;; +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. -- osf3* | osf4* | osf5*) -- lt_prog_compiler_wl_F77='-Wl,' -- # All OSF/1 code is PIC. -- lt_prog_compiler_static_F77='-non_shared' -- ;; +-# serial 2 ++# serial 4 -- sco3.2v5*) -- lt_prog_compiler_pic_F77='-Kpic' -- lt_prog_compiler_static_F77='-dn' -- ;; + # AM_MAKE_INCLUDE() + # ----------------- +@@ -6557,7 +8570,7 @@ AC_DEFUN([AM_MAKE_INCLUDE], + [am_make=${MAKE-make} + cat > confinc << 'END' + am__doit: +- @echo done ++ @echo this is the am__doit target + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. +@@ -6567,24 +8580,24 @@ am__quote= + _am_result=none + # First try GNU make style include. + echo "include confinc" > confmf +-# We grep out `Entering directory' and `Leaving directory' +-# messages which can occur if `w' ends up in MAKEFLAGS. +-# In particular we don't look at `^make:' because GNU make might +-# be invoked under some other name (usually "gmake"), in which +-# case it prints its new name instead of `make'. +-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then +- am__include=include +- am__quote= +- _am_result=GNU +-fi ++# Ignore all kinds of additional output from `make'. ++case `$am_make -s -f confmf 2> /dev/null` in #( ++*the\ am__doit\ target*) ++ am__include=include ++ am__quote= ++ _am_result=GNU ++ ;; ++esac + # Now try BSD make style include. + if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf +- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then +- am__include=.include +- am__quote="\"" +- _am_result=BSD +- fi ++ case `$am_make -s -f confmf 2> /dev/null` in #( ++ *the\ am__doit\ target*) ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ ;; ++ esac + fi + AC_SUBST([am__include]) + AC_SUBST([am__quote]) +@@ -6592,27 +8605,51 @@ AC_MSG_RESULT([$_am_result]) + rm -f confinc confmf + ]) -- solaris*) -- lt_prog_compiler_wl_F77='-Wl,' -- lt_prog_compiler_pic_F77='-KPIC' -- lt_prog_compiler_static_F77='-Bstatic' -- ;; +-# -*- Autoconf -*- +- ++# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. -- sunos4*) -- lt_prog_compiler_wl_F77='-Qoption ld ' -- lt_prog_compiler_pic_F77='-PIC' -- lt_prog_compiler_static_F77='-Bstatic' -- ;; +-# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. ++# serial 6 -- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -- lt_prog_compiler_wl_F77='-Wl,' -- lt_prog_compiler_pic_F77='-KPIC' -- lt_prog_compiler_static_F77='-Bstatic' -- ;; +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++# AM_PROG_CC_C_O ++# -------------- ++# Like AC_PROG_CC_C_O, but changed for automake. ++AC_DEFUN([AM_PROG_CC_C_O], ++[AC_REQUIRE([AC_PROG_CC_C_O])dnl ++AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++AC_REQUIRE_AUX_FILE([compile])dnl ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` ++eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o ++if test "$am_t" != yes; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++dnl Make sure AC_PROG_CC is never called again, or it will override our ++dnl setting of CC. ++m4_define([AC_PROG_CC], ++ [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) ++]) -- sysv4*MP*) -- if test -d /usr/nec ;then -- lt_prog_compiler_pic_F77='-Kconform_pic' -- lt_prog_compiler_static_F77='-Bstatic' -- fi -- ;; +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -- uts4*) -- lt_prog_compiler_pic_F77='-pic' -- lt_prog_compiler_static_F77='-Bstatic' -- ;; +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. -- *) -- lt_prog_compiler_can_build_shared_F77=no -- ;; -- esac -- fi +-# serial 3 ++# serial 6 --echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 --echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6 + # AM_MISSING_PROG(NAME, PROGRAM) + # ------------------------------ +@@ -6628,7 +8665,15 @@ AC_SUBST($1)]) + # If it does, set am_missing_run to use it, otherwise, to nothing. + AC_DEFUN([AM_MISSING_HAS_RUN], + [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++AC_REQUIRE_AUX_FILE([missing])dnl ++if test x"${MISSING+set}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; ++ *) ++ MISSING="\${SHELL} $am_aux_dir/missing" ;; ++ esac ++fi + # Use eval to expand $SHELL + if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +@@ -6638,100 +8683,41 @@ else + fi + ]) ++# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ + # AM_PROG_MKDIR_P + # --------------- +-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. +- +-# Copyright (C) 2003, 2004 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. +- +-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories +-# created by `make install' are always world readable, even if the +-# installer happens to have an overly restrictive umask (e.g. 077). +-# This was a mistake. There are at least two reasons why we must not +-# use `-m 0755': +-# - it causes special bits like SGID to be ignored, +-# - it may be too restrictive (some setups expect 775 directories). -# --# Check to make sure the PIC flag actually works. +-# Do not use -m 0755 and let people choose whatever they expect by +-# setting umask. -# --if test -n "$lt_prog_compiler_pic_F77"; then - --echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 --echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6 --if test "${lt_prog_compiler_pic_works_F77+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 +-# We cannot accept any implementation of `mkdir' that recognizes `-p'. +-# Some implementations (such as Solaris 8's) are not thread-safe: if a +-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' +-# concurrently, both version can detect that a/ is missing, but only +-# one can create it and the other will error out. Consequently we +-# restrict ourselves to GNU make (using the --version option ensures +-# this.) ++# Check for `mkdir -p'. + AC_DEFUN([AM_PROG_MKDIR_P], +-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then +- # We used to keeping the `.' as first argument, in order to +- # allow $(mkdir_p) to be used without argument. As in +- # $(mkdir_p) $(somedir) +- # where $(somedir) is conditionally defined. However this is wrong +- # for two reasons: +- # 1. if the package is installed by a user who cannot write `.' +- # make install will fail, +- # 2. the above comment should most certainly read +- # $(mkdir_p) $(DESTDIR)$(somedir) +- # so it does not work when $(somedir) is undefined and +- # $(DESTDIR) is not. +- # To support the latter case, we have to write +- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), +- # so the `.' trick is pointless. +- mkdir_p='mkdir -p --' -else -- lt_prog_compiler_pic_works_F77=no -- ac_outfile=conftest.$ac_objext -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -- lt_compiler_flag="$lt_prog_compiler_pic_F77" -- # Insert the option either (1) after the last *FLAGS variable, or -- # (2) before a word containing "conftest.", or (3) at the end. -- # Note that $ac_compile itself does not contain backslashes and begins -- # with a dollar sign (not a hyphen), so the echo should work correctly. -- # The option is referenced via a variable to avoid confusing sed. -- lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -- -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:13411: $lt_compile\"" >&5) -- (eval "$lt_compile" 2>conftest.err) -- ac_status=$? -- cat conftest.err >&5 -- echo "$as_me:13415: \$? = $ac_status" >&5 -- if (exit $ac_status) && test -s "$ac_outfile"; then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s conftest.err; then -- lt_prog_compiler_pic_works_F77=yes -- fi -- fi -- $rm conftest* - +- # On NextStep and OpenStep, the `mkdir' command does not +- # recognize any option. It will interpret all options as +- # directories to create, and then abort because `.' already +- # exists. +- for d in ./-p ./--version; +- do +- test -d $d && rmdir $d +- done +- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. +- if test -f "$ac_aux_dir/mkinstalldirs"; then +- mkdir_p='$(mkinstalldirs)' +- else +- mkdir_p='$(install_sh) -d' +- fi -fi --echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 --echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6 +-AC_SUBST([mkdir_p])]) +- +-# Helper functions for option handling. -*- Autoconf -*- +- +-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++[AC_PREREQ([2.60])dnl ++AC_REQUIRE([AC_PROG_MKDIR_P])dnl ++dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, ++dnl while keeping a definition of mkdir_p for backward compatibility. ++dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. ++dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of ++dnl Makefile.ins that do not define MKDIR_P, so we do our own ++dnl adjustment using top_builddir (which is defined more often than ++dnl MKDIR_P). ++AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl ++case $mkdir_p in ++ [[\\/$]]* | ?:[[\\/]]*) ;; ++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; ++esac ++]) --if test x"$lt_prog_compiler_pic_works_F77" = xyes; then -- case $lt_prog_compiler_pic_F77 in -- "" | " "*) ;; -- *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; -- esac --else -- lt_prog_compiler_pic_F77= -- lt_prog_compiler_can_build_shared_F77=no --fi +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# Helper functions for option handling. -*- Autoconf -*- --fi --case "$host_os" in -- # For platforms which do not support PIC, -DPIC is meaningless: -- *djgpp*) -- lt_prog_compiler_pic_F77= -- ;; -- *) -- lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" -- ;; --esac +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. --echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 --echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 --if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- lt_cv_prog_compiler_c_o_F77=no -- $rm -r conftest 2>/dev/null -- mkdir conftest -- cd conftest -- mkdir out -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +-# serial 2 ++# serial 4 -- lt_compiler_flag="-o out/conftest2.$ac_objext" -- # Insert the option either (1) after the last *FLAGS variable, or -- # (2) before a word containing "conftest.", or (3) at the end. -- # Note that $ac_compile itself does not contain backslashes and begins -- # with a dollar sign (not a hyphen), so the echo should work correctly. -- lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -- -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:13471: $lt_compile\"" >&5) -- (eval "$lt_compile" 2>out/conftest.err) -- ac_status=$? -- cat out/conftest.err >&5 -- echo "$as_me:13475: \$? = $ac_status" >&5 -- if (exit $ac_status) && test -s out/conftest2.$ac_objext -- then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s out/conftest.err; then -- lt_cv_prog_compiler_c_o_F77=yes -- fi -- fi -- chmod u+w . -- $rm conftest* -- # SGI C++ compiler will create directory out/ii_files/ for -- # template instantiation -- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files -- $rm out/* && rmdir out -- cd .. -- rmdir conftest -- $rm conftest* + # _AM_MANGLE_OPTION(NAME) + # ----------------------- +@@ -6748,7 +8734,7 @@ AC_DEFUN([_AM_SET_OPTION], + # ---------------------------------- + # OPTIONS is a space-separated list of Automake options. + AC_DEFUN([_AM_SET_OPTIONS], +-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) --fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6 + # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) + # ------------------------------------------- +@@ -6756,28 +8742,16 @@ AC_DEFUN([_AM_SET_OPTIONS], + AC_DEFUN([_AM_IF_OPTION], + [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) +-# +-# Check to make sure that the build environment is sane. +-# +- +-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++# Check to make sure that the build environment is sane. -*- Autoconf -*- + +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# serial 3 ++# serial 5 + + # AM_SANITY_CHECK + # --------------- +@@ -6786,16 +8760,29 @@ AC_DEFUN([AM_SANITY_CHECK], + # Just in case + sleep 1 + echo timestamp > conftest.file ++# Reject unsafe characters in $srcdir or the absolute working directory ++# name. Accept space and tab only in the latter. ++am_lf=' ++' ++case `pwd` in ++ *[[\\\"\#\$\&\'\`$am_lf]]*) ++ AC_MSG_ERROR([unsafe absolute working directory name]);; ++esac ++case $srcdir in ++ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) ++ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; ++esac ++ + # Do `set' in a subshell so we don't clobber the current shell's + # arguments. Must try -L first in case configure is actually a + # symlink; some systems play weird games with the mod time of symlinks + # (eg FreeBSD returns the mod time of the symlink's containing + # directory). + if ( +- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. +- set X `ls -t $srcdir/configure conftest.file` ++ set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ +@@ -6820,25 +8807,14 @@ Check your system clock]) + fi + AC_MSG_RESULT(yes)]) --hard_links="nottested" --if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then -- # do not overwrite the value of need_locks provided by the user -- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 --echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 -- hard_links=yes -- $rm conftest* -- ln conftest.a conftest.b 2>/dev/null && hard_links=no -- touch conftest.a -- ln conftest.a conftest.b 2>&5 || hard_links=no -- ln conftest.a conftest.b 2>/dev/null && hard_links=no -- echo "$as_me:$LINENO: result: $hard_links" >&5 --echo "${ECHO_T}$hard_links" >&6 -- if test "$hard_links" = no; then -- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 --echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} -- need_locks=warn -- fi --else -- need_locks=no --fi +-# AM_PROG_INSTALL_STRIP +- +-# Copyright (C) 2001, 2003 Free Software Foundation, Inc. +- +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. +- +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +- +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. --echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 --echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 ++# AM_PROG_INSTALL_STRIP ++# --------------------- + # One issue with vendor `install' (even GNU) is that you can't + # specify the program used to strip binaries. This is especially + # annoying in cross-compiling environments, where the build's strip +@@ -6856,30 +8832,37 @@ dnl Don't test for $cross_compiling = ye + if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) + fi +-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + AC_SUBST([INSTALL_STRIP_PROGRAM])]) -- runpath_var= -- allow_undefined_flag_F77= -- enable_shared_with_static_runtimes_F77=no -- archive_cmds_F77= -- archive_expsym_cmds_F77= -- old_archive_From_new_cmds_F77= -- old_archive_from_expsyms_cmds_F77= -- export_dynamic_flag_spec_F77= -- whole_archive_flag_spec_F77= -- thread_safe_flag_spec_F77= -- hardcode_libdir_flag_spec_F77= -- hardcode_libdir_flag_spec_ld_F77= -- hardcode_libdir_separator_F77= -- hardcode_direct_F77=no -- hardcode_minus_L_F77=no -- hardcode_shlibpath_var_F77=unsupported -- link_all_deplibs_F77=unknown -- hardcode_automatic_F77=no -- module_cmds_F77= -- module_expsym_cmds_F77= -- always_export_symbols_F77=no -- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -- # include_expsyms should be a list of space-separated symbols to be *always* -- # included in the symbol list -- include_expsyms_F77= -- # exclude_expsyms can be an extended regexp of symbols to exclude -- # it will be wrapped by ` (' and `)$', so one must not match beginning or -- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -- # as well as any symbol that contains `d'. -- exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_" -- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -- # platforms (ab)use it in PIC code, but their linkers get confused if -- # the symbol is explicitly referenced. Since portable code cannot -- # rely on this symbol name, it's probably fine to never include it in -- # preloaded symbol tables. -- extract_expsyms_cmds= +-# Check how to create a tarball. -*- Autoconf -*- ++# Copyright (C) 2006, 2008 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. -- case $host_os in -- cygwin* | mingw* | pw32*) -- # FIXME: the MSVC++ port hasn't been tested in a loooong time -- # When not using gcc, we currently assume that we are using -- # Microsoft Visual C++. -- if test "$GCC" != yes; then -- with_gnu_ld=no -- fi -- ;; -- openbsd*) -- with_gnu_ld=no -- ;; -- esac +-# Copyright (C) 2004 Free Software Foundation, Inc. ++# serial 2 -- ld_shlibs_F77=yes -- if test "$with_gnu_ld" = yes; then -- # If archive_cmds runs LD, not CC, wlarc should be empty -- wlarc='${wl}' +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2, or (at your option) +-# any later version. ++# _AM_SUBST_NOTMAKE(VARIABLE) ++# --------------------------- ++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. ++# This macro is traced by Automake. ++AC_DEFUN([_AM_SUBST_NOTMAKE]) -- # See if GNU ld supports shared libraries. -- case $host_os in -- aix3* | aix4* | aix5*) -- # On AIX/PPC, the GNU linker is very broken -- if test "$host_cpu" != ia64; then -- ld_shlibs_F77=no -- cat <&2 +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# AM_SUBST_NOTMAKE(VARIABLE) ++# --------------------------- ++# Public sister of _AM_SUBST_NOTMAKE. ++AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) --*** Warning: the GNU linker, at least up to release 2.9.1, is reported --*** to be unable to reliably create shared libraries on AIX. --*** Therefore, libtool is disabling shared libraries support. If you --*** really care for shared libraries, you may want to modify your PATH --*** so that a non-GNU linker is found, and then restart. +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +-# 02111-1307, USA. ++# Check how to create a tarball. -*- Autoconf -*- --EOF -- fi -- ;; +-# serial 1 ++# Copyright (C) 2004, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. -- amigaos*) -- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -- hardcode_libdir_flag_spec_F77='-L$libdir' -- hardcode_minus_L_F77=yes -- -- # Samuel A. Falvo II reports -- # that the semantics of dynamic libraries on AmigaOS, at least up -- # to version 4, is to share data among multiple programs linked -- # with the same dynamic library. Since this doesn't match the -- # behavior of shared libraries on other platforms, we can't use -- # them. -- ld_shlibs_F77=no -- ;; -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -+$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -+hardcode_action= -+if test -n "$hardcode_libdir_flag_spec" || -+ test -n "$runpath_var" || -+ test "X$hardcode_automatic" = "Xyes" ; then ++# serial 2 -- beos*) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- allow_undefined_flag_F77=unsupported -- # Joseph Beckenbach says some releases of gcc -- # support --undefined. This deserves some investigation. FIXME -- archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- else -- ld_shlibs_F77=no -- fi -- ;; -+ # We can hardcode non-existent directories. -+ if test "$hardcode_direct" != no && -+ # If the only mechanism to avoid hardcoding is shlibpath_var, we -+ # have to relink, otherwise we might link with an installed library -+ # when we should be linking with a yet-to-be-installed one -+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && -+ test "$hardcode_minus_L" != no; then -+ # Linking always hardcodes the temporary library directory. -+ hardcode_action=relink -+ else -+ # We can link without hardcoding, and we can hardcode nonexisting dirs. -+ hardcode_action=immediate -+ fi -+else -+ # We cannot hardcode anything, or else we can only hardcode existing -+ # directories. -+ hardcode_action=unsupported -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -+$as_echo "$hardcode_action" >&6; } + # _AM_PROG_TAR(FORMAT) + # -------------------- +--- raidutils-0.0.6.orig/config.h.in ++++ raidutils-0.0.6/config.h.in +@@ -178,6 +178,13 @@ + slash. */ + #undef LSTAT_FOLLOWS_SLASHED_SYMLINK -- cygwin* | mingw* | pw32*) -- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, -- # as there is no search path for DLLs. -- hardcode_libdir_flag_spec_F77='-L$libdir' -- allow_undefined_flag_F77=unsupported -- always_export_symbols_F77=no -- enable_shared_with_static_runtimes_F77=yes -- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* $[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' -+if test "$hardcode_action" = relink || -+ test "$inherit_rpath" = yes; then -+ # Fast installation is not supported -+ enable_fast_install=no -+elif test "$shlibpath_overrides_runpath" = yes || -+ test "$enable_shared" = no; then -+ # Fast installation is not necessary -+ enable_fast_install=needless -+fi ++/* Define to the sub-directory in which libtool stores uninstalled libraries. ++ */ ++#undef LT_OBJDIR ++ ++/* Define to 1 if your C compiler doesn't accept -c and -o together. */ ++#undef NO_MINUS_C_MINUS_O ++ + /* Name of package */ + #undef PACKAGE -- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then -- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- # If the export-symbols file already is a .def file (1st line -- # is EXPORTS), use it as is; otherwise, prepend... -- archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -- cp $export_symbols $output_objdir/$soname.def; -- else -- echo EXPORTS > $output_objdir/$soname.def; -- cat $export_symbols >> $output_objdir/$soname.def; -- fi~ -- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- else -- ld_shlibs=no -- fi -- ;; +@@ -193,12 +200,12 @@ + /* Define to the one symbol short name of this package. */ + #undef PACKAGE_TARNAME -- netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' -- wlarc= -- else -- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- fi -- ;; ++/* Define to the home page for this package. */ ++#undef PACKAGE_URL ++ + /* Define to the version of this package. */ + #undef PACKAGE_VERSION -- solaris* | sysv5*) -- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then -- ld_shlibs_F77=no -- cat <&2 +-/* Define as the return type of signal handlers (`int' or `void'). */ +-#undef RETSIGTYPE +- + /* Define to 1 if the `S_IS*' macros in do not work properly. */ + #undef STAT_MACROS_BROKEN --*** Warning: The releases 2.8.* of the GNU linker cannot reliably --*** create shared libraries on Solaris systems. Therefore, libtool --*** is disabling shared libraries support. We urge you to upgrade GNU --*** binutils to release 2.9.1 or newer. Another option is to modify --*** your PATH or compiler configuration so that the native linker is --*** used, and then restart. +@@ -232,7 +239,7 @@ + /* Define to rpl_realloc if the replacement function should be used. */ + #undef realloc --EOF -- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- else -- ld_shlibs_F77=no -- fi -- ;; +-/* Define to `unsigned' if does not define. */ ++/* Define to `unsigned int' if does not define. */ + #undef size_t -- sunos4*) -- archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- wlarc= -- hardcode_direct_F77=yes -- hardcode_shlibpath_var_F77=no -- ;; -+ if test "x$enable_dlopen" != xyes; then -+ enable_dlopen=unknown -+ enable_dlopen_self=unknown -+ enable_dlopen_self_static=unknown + /* Define as `fork' if `vfork' does not work. */ +--- raidutils-0.0.6.orig/ltmain.sh ++++ raidutils-0.0.6/ltmain.sh +@@ -1,4595 +1,3140 @@ +-# ltmain.sh - Provide generalized library-building support services. +-# NOTE: Changing this file will not affect anything until you rerun configure. +-# +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004 +-# Free Software Foundation, Inc. +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify ++# Generated from ltmain.m4sh. ++ ++# ltmain.sh (GNU libtool) 2.2.6b ++# Written by Gordon Matzigkeit , 1996 ++ ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. ++# This is free software; see the source for copying conditions. There is NO ++# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ++ ++# GNU Libtool is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # +-# This program is distributed in the hope that it will be useful, but ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, but + # WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + # General Public License for more details. + # + # You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, ++# or obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ ++# Usage: $progname [OPTION]... [MODE-ARG]... ++# ++# Provide generalized library-building support services. + # +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. ++# --config show all configuration variables ++# --debug enable verbose shell tracing ++# -n, --dry-run display commands without modifying any files ++# --features display basic configuration information and exit ++# --mode=MODE use operation mode MODE ++# --preserve-dup-deps don't remove duplicate dependency libraries ++# --quiet, --silent don't print informational messages ++# --tag=TAG use configuration variables from tag TAG ++# -v, --verbose print informational messages (default) ++# --version print version information ++# -h, --help print short or long help message ++# ++# MODE must be one of the following: ++# ++# clean remove files from the build directory ++# compile compile a source file into a libtool object ++# execute automatically set library path, then run a program ++# finish complete the installation of libtool libraries ++# install install libraries or executables ++# link create a library or an executable ++# uninstall remove libraries from an installed directory ++# ++# MODE-ARGS vary depending on the MODE. ++# Try `$progname --help --mode=MODE' for a more detailed description of MODE. ++# ++# When reporting a bug, please describe a test case to reproduce it and ++# include the following information: ++# ++# host-triplet: $host ++# shell: $SHELL ++# compiler: $LTCC ++# compiler flags: $LTCFLAGS ++# linker: $LD (gnu? $with_gnu_ld) ++# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2 ++# automake: $automake_version ++# autoconf: $autoconf_version ++# ++# Report bugs to . ++ ++PROGRAM=ltmain.sh ++PACKAGE=libtool ++VERSION="2.2.6b Debian-2.2.6b-2" ++TIMESTAMP="" ++package_revision=1.3017 ++ ++# Be Bourne compatible ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST +else -+ lt_cv_dlopen=no -+ lt_cv_dlopen_libs= ++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac ++fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh ++ ++# NLS nuisances: We save the old values to restore during execute mode. ++# Only set LANG and LC_ALL to C if already set. ++# These must not be set unconditionally because not all systems understand ++# e.g. LANG=C (notably SCO). ++lt_user_locale= ++lt_safe_locale= ++for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES ++do ++ eval "if test \"\${$lt_var+set}\" = set; then ++ save_$lt_var=\$$lt_var ++ $lt_var=C ++ export $lt_var ++ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" ++ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" ++ fi" ++done -- linux*) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_cmds_F77="$tmp_archive_cmds" -- supports_anon_versioning=no -- case `$LD -v 2>/dev/null` in -- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 -- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... -- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... -- *\ 2.11.*) ;; # other 2.11 versions -- *) supports_anon_versioning=yes ;; -- esac -- if test $supports_anon_versioning = yes; then -- archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ --cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ --$echo "local: *; };" >> $output_objdir/$libname.ver~ -- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' -- else -- archive_expsym_cmds_F77="$tmp_archive_cmds" -- fi -- else -- ld_shlibs_F77=no -- fi -+ case $host_os in -+ beos*) -+ lt_cv_dlopen="load_add_on" -+ lt_cv_dlopen_libs= -+ lt_cv_dlopen_self=yes - ;; +-basename="s,^.*/,,g" ++$lt_unset CDPATH -- *) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- else -- ld_shlibs_F77=no -- fi -- ;; -- esac -+ mingw* | pw32* | cegcc*) -+ lt_cv_dlopen="LoadLibrary" -+ lt_cv_dlopen_libs= -+ ;; +-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +-# is ksh but when the shell is invoked as "sh" and the current value of +-# the _XPG environment variable is not equal to 1 (one), the special +-# positional parameter $0, within a function call, is the name of the +-# function. +-progpath="$0" -- if test "$ld_shlibs_F77" = yes; then -- runpath_var=LD_RUN_PATH -- hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' -- export_dynamic_flag_spec_F77='${wl}--export-dynamic' -- # ancient GNU ld didn't support --whole-archive et. al. -- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then -- whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -- else -- whole_archive_flag_spec_F77= -- fi -- fi -- else -- # PORTME fill in a description of your system's linker (not GNU ld) -- case $host_os in -- aix3*) -- allow_undefined_flag_F77=unsupported -- always_export_symbols_F77=yes -- archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' -- # Note: this linker hardcodes the directories in LIBPATH if there -- # are no directories specified by -L. -- hardcode_minus_L_F77=yes -- if test "$GCC" = yes && test -z "$link_static_flag"; then -- # Neither direct hardcoding nor static linking is supported with a -- # broken collect2. -- hardcode_direct_F77=unsupported -- fi -- ;; -- -- aix4* | aix5*) -- if test "$host_cpu" = ia64; then -- # On IA64, the linker does run time linking by default, so we don't -- # have to do anything special. -- aix_use_runtimelinking=no -- exp_sym_flag='-Bexport' -- no_entry_flag="" -- else -- # If we're using GNU nm, then we don't want the "-C" option. -- # -C means demangle to AIX nm, but means don't demangle with GNU nm -- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then -- export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' -- else -- export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' -- fi -- aix_use_runtimelinking=no -+ cygwin*) -+ lt_cv_dlopen="dlopen" -+ lt_cv_dlopen_libs= -+ ;; +-# RH: define SED for historic ltconfig's generated by Libtool 1.3 +-[ -z "$SED" ] && SED=sed -- # Test if we are trying to use run time linking or normal -- # AIX style linking. If -brtl is somewhere in LDFLAGS, we -- # need to do runtime linking. -- case $host_os in aix4.[23]|aix4.[23].*|aix5*) -- for ld_flag in $LDFLAGS; do -- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then -- aix_use_runtimelinking=yes -- break -- fi -- done -- esac -+ darwin*) -+ # if libdl is installed we need to link against it -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -+$as_echo_n "checking for dlopen in -ldl... " >&6; } -+if test "${ac_cv_lib_dl_dlopen+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-ldl $LIBS" -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ +-# The name of this program: +-progname=`echo "$progpath" | $SED $basename` +-modename="$progname" ++ ++ ++: ${CP="cp -f"} ++: ${ECHO="echo"} ++: ${EGREP="/bin/grep -E"} ++: ${FGREP="/bin/grep -F"} ++: ${GREP="/bin/grep"} ++: ${LN_S="ln -s"} ++: ${MAKE="make"} ++: ${MKDIR="mkdir"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++: ${SED="/bin/sed"} ++: ${SHELL="${CONFIG_SHELL-/bin/sh}"} ++: ${Xsed="$SED -e 1s/^X//"} -- exp_sym_flag='-bexport' -- no_entry_flag='-bnoentry' -- fi -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+char dlopen (); -+int -+main () + # Global variables: + EXIT_SUCCESS=0 + EXIT_FAILURE=1 ++EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. ++EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +-PROGRAM=ltmain.sh +-PACKAGE=libtool +-VERSION=1.5.6 +-TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42)" ++exit_status=$EXIT_SUCCESS + ++# Make sure IFS has a sensible default ++lt_nl=' ++' ++IFS=" $lt_nl" ++ ++dirname="s,/[^/]*$,," ++basename="s,^.*/,," ++ ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () +{ -+return dlopen (); -+ ; -+ return 0; ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ ac_cv_lib_dl_dlopen=yes -+else -+ ac_cv_lib_dl_dlopen=no -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -+$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : -+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -+else - -- # When large executables or shared objects are built, AIX ld can -- # have problems creating the table of contents. If linking a library -- # or program results in "error TOC overflow" add -mminimal-toc to -- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not -- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -+ lt_cv_dlopen="dyld" -+ lt_cv_dlopen_libs= -+ lt_cv_dlopen_self=yes -- archive_cmds_F77='' -- hardcode_direct_F77=yes -- hardcode_libdir_separator_F77=':' -- link_all_deplibs_F77=yes -+fi +-# Check that we have a working $echo. +-if test "X$1" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +-elif test "X$1" = X--fallback-echo; then +- # Avoid inline document here, it may be left over +- : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then +- # Yippee, $echo works! +- : +-else +- # Restart under the correct shell, and then maybe $echo will work. +- exec $SHELL "$progpath" --no-reexec ${1+"$@"} +-fi ++# Generated shell functions inserted here. -- if test "$GCC" = yes; then -- case $host_os in aix4.012|aix4.012.*) -- # We only want to do this on AIX 4.2 and lower, the check -- # below for broken collect2 doesn't work under 4.3+ -- collect2name=`${CC} -print-prog-name=collect2` -- if test -f "$collect2name" && \ -- strings "$collect2name" | grep resolve_lib_name >/dev/null -- then -- # We have reworked collect2 -- hardcode_direct_F77=yes -- else -- # We have old collect2 -- hardcode_direct_F77=unsupported -- # It fails to find uninstalled libraries when the uninstalled -- # path is not listed in the libpath. Setting hardcode_minus_L -- # to unsupported forces relinking -- hardcode_minus_L_F77=yes -- hardcode_libdir_flag_spec_F77='-L$libdir' -- hardcode_libdir_separator_F77= -- fi -- esac -- shared_flag='-shared' -- else -- # not using gcc -- if test "$host_cpu" = ia64; then -- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release -- # chokes on -Wl,-G. The following line is correct: -- shared_flag='-G' -- else -- if test "$aix_use_runtimelinking" = yes; then -- shared_flag='${wl}-G' -- else -- shared_flag='${wl}-bM:SRE' -- fi -- fi -- fi -+ ;; +-if test "X$1" = X--fallback-echo; then +- # used as fallback echo +- shift +- cat <conftest.$ac_ext <<_ACEOF -- program main -- -- end --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_f77_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then +-default_mode= +-help="Try \`$progname --help' for more information." +-magic="%%%MAGIC variable%%%" +-mkdir="mkdir" +-mv="mv -f" +-rm="rm -f" ++# The name of this program: ++# In the unlikely event $progname began with a '-', it would play havoc with ++# func_echo (imagine progname=-n), so we prepend ./ in that case: ++func_dirname_and_basename "$progpath" ++progname=$func_basename_result ++case $progname in ++ -*) progname=./$progname ;; ++esac ++ ++# Make sure we have an absolute path for reexecution: ++case $progpath in ++ [\\/]*|[A-Za-z]:\\*) ;; ++ *[\\/]*) ++ progdir=$func_dirname_result ++ progdir=`cd "$progdir" && pwd` ++ progpath="$progdir/$progname" ++ ;; + *) -+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -+if test "x$ac_cv_func_shl_load" = x""yes; then : -+ lt_cv_dlopen="shl_load" -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -+$as_echo_n "checking for shl_load in -ldld... " >&6; } -+if test "${ac_cv_lib_dld_shl_load+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-ldld $LIBS" -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ ++ save_IFS="$IFS" ++ IFS=: ++ for progdir in $PATH; do ++ IFS="$save_IFS" ++ test -x "$progdir/$progname" && break ++ done ++ IFS="$save_IFS" ++ test -n "$progdir" || progdir=`pwd` ++ progpath="$progdir/$progname" ++ ;; ++esac --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'`; fi -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+char shl_load (); -+int -+main () -+{ -+return shl_load (); -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ ac_cv_lib_dld_shl_load=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ ac_cv_lib_dld_shl_load=no -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -+$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -+if test "x$ac_cv_lib_dld_shl_load" = x""yes; then : -+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -+else -+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -+if test "x$ac_cv_func_dlopen" = x""yes; then : -+ lt_cv_dlopen="dlopen" -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -+$as_echo_n "checking for dlopen in -ldl... " >&6; } -+if test "${ac_cv_lib_dl_dlopen+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-ldl $LIBS" -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ + # Sed substitution that helps us do robust quoting. It backslashifies + # metacharacters that are still active within double-quoted strings. + Xsed="${SED}"' -e 1s/^X//' +-sed_quote_subst='s/$[\\`\\"$\\\\]$/\\\1/g' +-# test EBCDIC or ASCII +-case `echo A|tr A '\301'` in +- A) # EBCDIC based system +- SP2NL="tr '\100' '\n'" +- NL2SP="tr '\r\n' '\100\100'" +- ;; +- *) # Assume ASCII based system +- SP2NL="tr '\040' '\012'" +- NL2SP="tr '\015\012' '\040\040'" +- ;; +-esac ++sed_quote_subst='s/$[`"$\\]$/\\\1/g' -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+char dlopen (); -+int -+main () -+{ -+return dlopen (); -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ ac_cv_lib_dl_dlopen=yes -+else -+ ac_cv_lib_dl_dlopen=no - fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -+$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : -+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -+$as_echo_n "checking for dlopen in -lsvld... " >&6; } -+if test "${ac_cv_lib_svld_dlopen+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-lsvld $LIBS" -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ +-# NLS nuisances. +-# Only set LANG and LC_ALL to C if already set. +-# These must not be set unconditionally because not all systems understand +-# e.g. LANG=C (notably SCO). +-# We save the old values to restore during execute mode. +-if test "${LC_ALL+set}" = set; then +- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL +-fi +-if test "${LANG+set}" = set; then +- save_LANG="$LANG"; LANG=C; export LANG +-fi ++# Same as above, but do not quote variable references. ++double_quote_subst='s/$["`\\]$/\\\1/g' -- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" -- archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" -- else -- if test "$host_cpu" = ia64; then -- hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' -- allow_undefined_flag_F77="-z nodefs" -- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" -- else -- # Determine the default libpath from the value encoded in an empty executable. -- cat >conftest.$ac_ext <<_ACEOF -- program main -- -- end --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_f77_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+char dlopen (); -+int -+main () +-# Make sure IFS has a sensible default +-: ${IFS=" +-"} ++# Re-`\' parameter expansions in output of double_quote_subst that were ++# `\'-ed in input to the same. If an odd number of `\' preceded a '$' ++# in input to double_quote_subst, that '$' was protected from expansion. ++# Since each input `\' is now two `\'s, look for any number of runs of ++# four `\'s followed by two `\'s and then a '$'. `\' that '$'. ++bs='\\' ++bs2='\\\\' ++bs4='\\\\\\\\' ++dollar='\$' ++sed_double_backslash="\ ++ s/$bs4/&\\ ++/g ++ s/^$bs2$dollar/$bs&/ ++ s/\$[^$bs]\$$bs2$dollar/\\1$bs2$bs$dollar/g ++ s/\n//g" ++ ++# Standard options: ++opt_dry_run=false ++opt_help=false ++opt_quiet=false ++opt_verbose=false ++opt_warning=: ++ ++# func_echo arg... ++# Echo program name prefixed message, along with the current mode ++# name if it has been set yet. ++func_echo () +{ -+return dlopen (); -+ ; -+ return 0; ++ $ECHO "$progname${mode+: }$mode: $*" +} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ ac_cv_lib_svld_dlopen=yes -+else -+ ac_cv_lib_svld_dlopen=no -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -+$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -+if test "x$ac_cv_lib_svld_dlopen" = x""yes; then : -+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -+$as_echo_n "checking for dld_link in -ldld... " >&6; } -+if test "${ac_cv_lib_dld_dld_link+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-ldld $LIBS" -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'`; fi -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+char dld_link (); -+int -+main () +-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then +- $echo "$modename: not configured to build any kind of library" 1>&2 +- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit $EXIT_FAILURE +-fi ++# func_verbose arg... ++# Echo program name prefixed message in verbose mode only. ++func_verbose () +{ -+return dld_link (); -+ ; -+ return 0; ++ $opt_verbose && func_echo ${1+"$@"} + +-# Global variables. +-mode=$default_mode +-nonopt= +-prev= +-prevopt= +-run= +-show="$echo" +-show_help= +-execute_dlfiles= +-lo2o="s/\\.lo\$/.${objext}/" +-o2lo="s/\\.${objext}\$/.lo/" ++ # A bug in bash halts the script if the last line of a function ++ # fails when set -e is in force, so we need another command to ++ # work around that: ++ : +} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ ac_cv_lib_dld_dld_link=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ ac_cv_lib_dld_dld_link=no -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -+$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -+if test "x$ac_cv_lib_dld_dld_link" = x""yes; then : -+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -+fi -+ - fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +-##################################### +-# Shell function definitions: +-# This seems to be the best place for them ++# func_error arg... ++# Echo program name prefixed message to standard error. ++func_error () ++{ ++ $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 ++} -- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" -- # Warning - without using the other run time loading flags, -- # -berok will link without error, but may produce a broken library. -- no_undefined_flag_F77=' ${wl}-bernotok' -- allow_undefined_flag_F77=' ${wl}-berok' -- # -bexpall does not export symbols beginning with underscore (_) -- always_export_symbols_F77=yes -- # Exported symbols can be pulled into shared objects from archives -- whole_archive_flag_spec_F77=' ' -- archive_cmds_need_lc_F77=yes -- # This is similar to how AIX traditionally builds it's shared libraries. -- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -- fi +-# func_win32_libid arg +-# return the library type of file 'arg' +-# +-# Need a lot of goo to handle *both* DLLs and import libs +-# Has to be a shell function in order to 'eat' the argument +-# that is supplied when $file_magic_command is called. +-func_win32_libid () { +- win32_libid_type="unknown" +- win32_fileres=`file -L $1 2>/dev/null` +- case $win32_fileres in +- *ar\ archive\ import\ library*) # definitely import +- win32_libid_type="x86 archive import" +- ;; +- *ar\ archive*) # could be an import, or static +- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ +- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then +- win32_nmres=`eval $NM -f posix -A $1 | \ +- sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` +- if test "X$win32_nmres" = "Ximport" ; then +- win32_libid_type="x86 archive import" +- else +- win32_libid_type="x86 archive static" - fi +- fi +- ;; +- *DLL*) +- win32_libid_type="x86 DLL" +- ;; +- *executable*) # but shell scripts are "executable" too... +- case $win32_fileres in +- *MS\ Windows\ PE\ Intel*) +- win32_libid_type="x86 DLL" - ;; +- esac +- ;; +- esac +- $echo $win32_libid_type ++# func_warning arg... ++# Echo program name prefixed warning message to standard error. ++func_warning () ++{ ++ $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 ++ ++ # bash bug again: ++ : + } -- amigaos*) -- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -- hardcode_libdir_flag_spec_F77='-L$libdir' -- hardcode_minus_L_F77=yes -- # see comment about different semantics on the GNU ld section -- ld_shlibs_F77=no -- ;; -+fi - -- bsdi4*) -- export_dynamic_flag_spec_F77=-rdynamic -- ;; - -- cygwin* | mingw* | pw32*) -- # When not using gcc, we currently assume that we are using -- # Microsoft Visual C++. -- # hardcode_libdir_flag_spec is actually meaningless, as there is -- # no search path for DLLs. -- hardcode_libdir_flag_spec_F77=' ' -- allow_undefined_flag_F77=unsupported -- # Tell ltmain to make .lib files, not .a files. -- libext=lib -- # Tell ltmain to make .dll files, not .so files. -- shrext_cmds=".dll" -- # FIXME: Setting linknames here is a bad hack. -- archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' -- # The linker will automatically build a .lib file if we build a DLL. -- old_archive_From_new_cmds_F77='true' -- # FIXME: Should let the user specify the lib program. -- old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' -- fix_srcfile_path='`cygpath -w "$srcfile"`' -- enable_shared_with_static_runtimes_F77=yes -- ;; -+fi ++# func_fatal_error arg... ++# Echo program name prefixed message to standard error, and exit. ++func_fatal_error () ++{ ++ func_error ${1+"$@"} ++ exit $EXIT_FAILURE ++} -- darwin* | rhapsody*) -- if test "$GXX" = yes ; then -- archive_cmds_need_lc_F77=no -- case "$host_os" in -- rhapsody* | darwin1.[012]) -- allow_undefined_flag_F77='-undefined suppress' -- ;; -- *) # Darwin 1.3 on -- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then -- allow_undefined_flag_F77='-flat_namespace -undefined suppress' -- else -- case ${MACOSX_DEPLOYMENT_TARGET} in -- 10.[012]) -- allow_undefined_flag_F77='-flat_namespace -undefined suppress' -- ;; -- 10.*) -- allow_undefined_flag_F77='-undefined dynamic_lookup' -- ;; -- esac -- fi +-# func_infer_tag arg +-# Infer tagged configuration to use if any are available and +-# if one wasn't chosen via the "--tag" command line option. +-# Only attempt this if the compiler in the base compile +-# command doesn't match the default compiler. +-# arg is usually of the form 'gcc ...' +-func_infer_tag () { +- if test -n "$available_tags" && test -z "$tagname"; then +- CC_quoted= +- for arg in $CC; do +- case $arg in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- CC_quoted="$CC_quoted $arg" +- done +- case $@ in +- # Blanks in the command may have been stripped by the calling shell, +- # but not from the CC environment variable when configure was run. +- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; +- # Blanks at the start of $base_compile will cause this to fail +- # if we don't check for them as well. +- *) +- for z in $available_tags; do +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then +- # Evaluate the configuration. +- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" +- CC_quoted= +- for arg in $CC; do +- # Double-quote args containing other shell metacharacters. +- case $arg in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- CC_quoted="$CC_quoted $arg" +- done +- case "$@ " in +- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) +- # The compiler in the base compile command matches +- # the one in the tagged configuration. +- # Assume this is the tagged configuration we want. +- tagname=$z +- break +- ;; +- esac +- fi +- done +- # If $tagname still isn't set, then no tagged configuration +- # was found and let the user know that the "--tag" command +- # line option must be used. +- if test -z "$tagname"; then +- $echo "$modename: unable to infer tagged configuration" +- $echo "$modename: specify a tag with \`--tag'" 1>&2 +- exit $EXIT_FAILURE +-# else +-# $echo "$modename: using $tagname tagged configuration" +- fi - ;; - esac -- lt_int_apple_cc_single_mod=no -- output_verbose_link_cmd='echo' -- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then -- lt_int_apple_cc_single_mod=yes -- fi -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- archive_cmds_F77='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' -- else -- archive_cmds_F77='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' -- fi -- module_cmds_F77='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' -- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- else -- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- fi -- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- hardcode_direct_F77=no -- hardcode_automatic_F77=yes -- hardcode_shlibpath_var_F77=unsupported -- whole_archive_flag_spec_F77='-all_load $convenience' -- link_all_deplibs_F77=yes -- else -- ld_shlibs_F77=no - fi -- ;; - -- dgux*) -- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_libdir_flag_spec_F77='-L$libdir' -- hardcode_shlibpath_var_F77=no -- ;; -+fi - -- freebsd1*) -- ld_shlibs_F77=no -- ;; ++# func_fatal_help arg... ++# Echo program name prefixed message to standard error, followed by ++# a help hint, and exit. ++func_fatal_help () ++{ ++ func_error ${1+"$@"} ++ func_fatal_error "$help" + } +-# End of Shell function definitions +-##################################### ++help="Try \`$progname --help' for more information." ## default -- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor -- # support. Future versions do this automatically, but an explicit c++rt0.o -- # does not break anything, and helps significantly (at the cost of a little -- # extra space). -- freebsd2.2*) -- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' -- hardcode_libdir_flag_spec_F77='-R$libdir' -- hardcode_direct_F77=yes -- hardcode_shlibpath_var_F77=no -- ;; -- -- # Unfortunately, older versions of FreeBSD 2 do not have this feature. -- freebsd2*) -- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct_F77=yes -- hardcode_minus_L_F77=yes -- hardcode_shlibpath_var_F77=no -- ;; -+fi +-# Darwin sucks +-eval std_shrext=\"$shrext_cmds\" -- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. -- freebsd* | kfreebsd*-gnu) -- archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' -- hardcode_libdir_flag_spec_F77='-R$libdir' -- hardcode_direct_F77=yes -- hardcode_shlibpath_var_F77=no -- ;; -+ ;; -+ esac +-# Parse our command line options once, thoroughly. +-while test "$#" -gt 0 +-do +- arg="$1" +- shift ++# func_grep expression filename ++# Check whether EXPRESSION matches any line of FILENAME, without output. ++func_grep () ++{ ++ $GREP "$1" "$2" >/dev/null 2>&1 ++} -- hpux9*) -- if test "$GCC" = yes; then -- archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -- else -- archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -- fi -- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' -- hardcode_libdir_separator_F77=: -- hardcode_direct_F77=yes -+ if test "x$lt_cv_dlopen" != xno; then -+ enable_dlopen=yes -+ else -+ enable_dlopen=no -+ fi +- case $arg in +- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; +- *) optarg= ;; +- esac -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- hardcode_minus_L_F77=yes -- export_dynamic_flag_spec_F77='${wl}-E' +- # If the previous option needs an argument, assign it. +- if test -n "$prev"; then +- case $prev in +- execute_dlfiles) +- execute_dlfiles="$execute_dlfiles $arg" - ;; -+ case $lt_cv_dlopen in -+ dlopen) -+ save_CPPFLAGS="$CPPFLAGS" -+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - -- hpux10* | hpux11*) -- if test "$GCC" = yes -a "$with_gnu_ld" = no; then -- case "$host_cpu" in -- hppa*64*|ia64*) -- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- ;; -- *) -- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -- ;; -- esac -- else -- case "$host_cpu" in -- hppa*64*|ia64*) -- archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' -- ;; -- *) -- archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -- ;; -- esac -- fi -- if test "$with_gnu_ld" = no; then -- case "$host_cpu" in -- hppa*64*) -- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' -- hardcode_libdir_flag_spec_ld_F77='+b $libdir' -- hardcode_libdir_separator_F77=: -- hardcode_direct_F77=no -- hardcode_shlibpath_var_F77=no -- ;; -- ia64*) -- hardcode_libdir_flag_spec_F77='-L$libdir' -- hardcode_direct_F77=no -- hardcode_shlibpath_var_F77=no -+ save_LDFLAGS="$LDFLAGS" -+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- hardcode_minus_L_F77=yes -- ;; -- *) -- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' -- hardcode_libdir_separator_F77=: -- hardcode_direct_F77=yes -- export_dynamic_flag_spec_F77='${wl}-E' -+ save_LIBS="$LIBS" -+ LIBS="$lt_cv_dlopen_libs $LIBS" +- tag) +- tagname="$arg" +- preserve_args="${preserve_args}=$arg" +- +- # Check whether tagname contains only valid characters +- case $tagname in +- *[!-_A-Za-z0-9,/]*) +- $echo "$progname: invalid tag name: $tagname" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++# func_mkdir_p directory-path ++# Make sure the entire path to DIRECTORY-PATH is available. ++func_mkdir_p () ++{ ++ my_directory_path="$1" ++ my_dir_list= -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- hardcode_minus_L_F77=yes -- ;; -- esac -- fi +- case $tagname in +- CC) +- # Don't test for the "default" C tag, as we know, it's there, but +- # not specially marked. +- ;; +- *) +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then +- taglist="$taglist $tagname" +- # Evaluate the configuration. +- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" +- else +- $echo "$progname: ignoring unknown tag $tagname" 1>&2 +- fi +- ;; ++ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then ++ ++ # Protect directory names starting with `-' ++ case $my_directory_path in ++ -*) my_directory_path="./$my_directory_path" ;; + esac - ;; -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -+$as_echo_n "checking whether a program can dlopen itself... " >&6; } -+if test "${lt_cv_dlopen_self+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test "$cross_compiling" = yes; then : -+ lt_cv_dlopen_self=cross -+else -+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 -+ lt_status=$lt_dlunknown -+ cat > conftest.$ac_ext <<_LT_EOF -+#line 11276 "configure" -+#include "confdefs.h" - -- irix5* | irix6* | nonstopux*) -- if test "$GCC" = yes; then -- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- else -- archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' -- fi -- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator_F77=: -- link_all_deplibs_F77=yes +- *) +- eval "$prev=\$arg" - ;; -+#if HAVE_DLFCN_H -+#include -+#endif +- esac -- netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out -- else -- archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF -- fi -- hardcode_libdir_flag_spec_F77='-R$libdir' -- hardcode_direct_F77=yes -- hardcode_shlibpath_var_F77=no -- ;; -+#include +- prev= +- prevopt= +- continue +- fi ++ # While some portion of DIR does not yet exist... ++ while test ! -d "$my_directory_path"; do ++ # ...make a list in topmost first order. Use a colon delimited ++ # list incase some portion of path contains whitespace. ++ my_dir_list="$my_directory_path:$my_dir_list" -- newsos6) -- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct_F77=yes -- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator_F77=: -- hardcode_shlibpath_var_F77=no -- ;; -+#ifdef RTLD_GLOBAL -+# define LT_DLGLOBAL RTLD_GLOBAL -+#else -+# ifdef DL_GLOBAL -+# define LT_DLGLOBAL DL_GLOBAL -+# else -+# define LT_DLGLOBAL 0 -+# endif -+#endif +- # Have we seen a non-optional argument yet? +- case $arg in +- --help) +- show_help=yes +- ;; ++ # If the last portion added has no slash in it, the list is done ++ case $my_directory_path in */*) ;; *) break ;; esac -- openbsd*) -- hardcode_direct_F77=yes -- hardcode_shlibpath_var_F77=no -- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' -- export_dynamic_flag_spec_F77='${wl}-E' -- else -- case $host_os in -- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) -- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- hardcode_libdir_flag_spec_F77='-R$libdir' -- ;; -- *) -- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' -- ;; -- esac -- fi -- ;; -+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we -+ find out it does not work in some platform. */ -+#ifndef LT_DLLAZY_OR_NOW -+# ifdef RTLD_LAZY -+# define LT_DLLAZY_OR_NOW RTLD_LAZY -+# else -+# ifdef DL_LAZY -+# define LT_DLLAZY_OR_NOW DL_LAZY -+# else -+# ifdef RTLD_NOW -+# define LT_DLLAZY_OR_NOW RTLD_NOW -+# else -+# ifdef DL_NOW -+# define LT_DLLAZY_OR_NOW DL_NOW -+# else -+# define LT_DLLAZY_OR_NOW 0 -+# endif -+# endif -+# endif -+# endif -+#endif +- --version) +- $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" +- $echo +- $echo "Copyright (C) 2003 Free Software Foundation, Inc." +- $echo "This is free software; see the source for copying conditions. There is NO" +- $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." +- exit $EXIT_SUCCESS +- ;; ++ # ...otherwise throw away the child directory and loop ++ my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` ++ done ++ my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` -- os2*) -- hardcode_libdir_flag_spec_F77='-L$libdir' -- hardcode_minus_L_F77=yes -- allow_undefined_flag_F77=unsupported -- archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' -- old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' -- ;; -+void fnord() { int i=42;} -+int main () +- --config) +- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath +- # Now print the configurations for the tags. +- for tagname in $taglist; do +- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" +- done +- exit $EXIT_SUCCESS +- ;; ++ save_mkdir_p_IFS="$IFS"; IFS=':' ++ for my_dir in $my_dir_list; do ++ IFS="$save_mkdir_p_IFS" ++ # mkdir can fail with a `File exist' error if two processes ++ # try to create one of the directories concurrently. Don't ++ # stop in that case! ++ $MKDIR "$my_dir" 2>/dev/null || : ++ done ++ IFS="$save_mkdir_p_IFS" + +- --debug) +- $echo "$progname: enabling shell trace mode" +- set -x +- preserve_args="$preserve_args $arg" +- ;; ++ # Bail out if we (or some other process) failed to create a directory. ++ test -d "$my_directory_path" || \ ++ func_fatal_error "Failed to create \`$1'" ++ fi ++} + +- --dry-run | -n) +- run=: +- ;; + +- --features) +- $echo "host: $host" +- if test "$build_libtool_libs" = yes; then +- $echo "enable shared libraries" +- else +- $echo "disable shared libraries" +- fi +- if test "$build_old_libs" = yes; then +- $echo "enable static libraries" ++# func_mktempdir [string] ++# Make a temporary directory that won't clash with other running ++# libtool processes, and avoids race conditions if possible. If ++# given, STRING is the basename for that directory. ++func_mktempdir () +{ -+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -+ int status = $lt_dlunknown; ++ my_template="${TMPDIR-/tmp}/${1-$progname}" ++ ++ if test "$opt_dry_run" = ":"; then ++ # Return a directory name, but don't create it in dry-run mode ++ my_tmpdir="${my_template}-$$" + else +- $echo "disable static libraries" +- fi +- exit $EXIT_SUCCESS +- ;; -- osf3*) -- if test "$GCC" = yes; then -- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- else -- allow_undefined_flag_F77=' -expect_unresolved \*' -- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- fi -- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator_F77=: -- ;; -+ if (self) -+ { -+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -+ /* dlclose (self); */ -+ } -+ else -+ puts (dlerror ()); +- --finish) mode="finish" ;; ++ # If mktemp works, use that first and foremost ++ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` -- osf4* | osf5*) # as osf3* with the addition of -msym flag -- if test "$GCC" = yes; then -- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' -- else -- allow_undefined_flag_F77=' -expect_unresolved \*' -- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ -- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' -+ return status; -+} -+_LT_EOF -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 -+ (eval $ac_link) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then -+ (./conftest; exit; ) >&5 2>/dev/null -+ lt_status=$? -+ case x$lt_status in -+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; -+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; -+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; -+ esac -+ else : -+ # compilation failed -+ lt_cv_dlopen_self=no -+ fi -+fi -+rm -fr conftest* +- --mode) prevopt="--mode" prev=mode ;; +- --mode=*) mode="$optarg" ;; ++ if test ! -d "$my_tmpdir"; then ++ # Failing that, at least try and use $RANDOM to avoid a race ++ my_tmpdir="${my_template}-${RANDOM-0}$$" -- # Both c and cxx compiler support -rpath directly -- hardcode_libdir_flag_spec_F77='-rpath $libdir' -- fi -- hardcode_libdir_separator_F77=: -- ;; +- --preserve-dup-deps) duplicate_deps="yes" ;; ++ save_mktempdir_umask=`umask` ++ umask 0077 ++ $MKDIR "$my_tmpdir" ++ umask $save_mktempdir_umask ++ fi -- sco3.2v5*) -- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_shlibpath_var_F77=no -- export_dynamic_flag_spec_F77='${wl}-Bexport' -- runpath_var=LD_RUN_PATH -- hardcode_runpath_var=yes -- ;; -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -+$as_echo "$lt_cv_dlopen_self" >&6; } +- --quiet | --silent) +- show=: +- preserve_args="$preserve_args $arg" +- ;; ++ # If we're not in dry-run mode, bomb out on failure ++ test -d "$my_tmpdir" || \ ++ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" ++ fi -- solaris*) -- no_undefined_flag_F77=' -z text' -- if test "$GCC" = yes; then -- archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' -- else -- archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' -- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' -- fi -- hardcode_libdir_flag_spec_F77='-R$libdir' -- hardcode_shlibpath_var_F77=no -- case $host_os in -- solaris2.[0-5] | solaris2.[0-5].*) ;; -- *) # Supported since Solaris 2.6 (maybe 2.5.1?) -- whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; -- esac -- link_all_deplibs_F77=yes -- ;; -+ if test "x$lt_cv_dlopen_self" = xyes; then -+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -+if test "${lt_cv_dlopen_self_static+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test "$cross_compiling" = yes; then : -+ lt_cv_dlopen_self_static=cross -+else -+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 -+ lt_status=$lt_dlunknown -+ cat > conftest.$ac_ext <<_LT_EOF -+#line 11372 "configure" -+#include "confdefs.h" +- --tag) prevopt="--tag" prev=tag ;; +- --tag=*) +- set tag "$optarg" ${1+"$@"} +- shift +- prev=tag +- preserve_args="$preserve_args --tag" +- ;; ++ $ECHO "X$my_tmpdir" | $Xsed ++} -- sunos4*) -- if test "x$host_vendor" = xsequent; then -- # Use $CC to link under sequent, because it throws in some extra .o -- # files that make .init and .fini sections work. -- archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' -- else -- archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' -- fi -- hardcode_libdir_flag_spec_F77='-L$libdir' -- hardcode_direct_F77=yes -- hardcode_minus_L_F77=yes -- hardcode_shlibpath_var_F77=no -- ;; -+#if HAVE_DLFCN_H -+#include -+#endif +- -dlopen) +- prevopt="-dlopen" +- prev=execute_dlfiles +- ;; -- sysv4) -- case $host_vendor in -- sni) -- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct_F77=yes # is this really true??? -- ;; -- siemens) -- ## LD is ld it makes a PLAMLIB -- ## CC just makes a GrossModule. -- archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' -- reload_cmds_F77='$CC -r -o $output$reload_objs' -- hardcode_direct_F77=no -- ;; -- motorola) -- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie -- ;; -- esac -- runpath_var='LD_RUN_PATH' -- hardcode_shlibpath_var_F77=no -- ;; -+#include +- -*) +- $echo "$modename: unrecognized option \`$arg'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; ++# func_quote_for_eval arg ++# Aesthetically quote ARG to be evaled later. ++# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT ++# is double-quoted, suitable for a subsequent eval, whereas ++# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters ++# which are still active within double quotes backslashified. ++func_quote_for_eval () ++{ ++ case $1 in ++ *[\\\`\"\$]*) ++ func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; ++ *) ++ func_quote_for_eval_unquoted_result="$1" ;; ++ esac -- sysv4.3*) -- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_shlibpath_var_F77=no -- export_dynamic_flag_spec_F77='-Bexport' -- ;; -+#ifdef RTLD_GLOBAL -+# define LT_DLGLOBAL RTLD_GLOBAL -+#else -+# ifdef DL_GLOBAL -+# define LT_DLGLOBAL DL_GLOBAL -+# else -+# define LT_DLGLOBAL 0 -+# endif -+#endif +- *) +- nonopt="$arg" +- break +- ;; +- esac +-done ++ case $func_quote_for_eval_unquoted_result in ++ # Double-quote args containing shell metacharacters to delay ++ # word splitting, command substitution and and variable ++ # expansion for a subsequent eval. ++ # Many Bourne shells cannot handle close brackets correctly ++ # in scan sets, so we specify it separately. ++ *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ++ ;; ++ *) ++ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" ++ esac ++} -- sysv4*MP*) -- if test -d /usr/nec; then -- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_shlibpath_var_F77=no -- runpath_var=LD_RUN_PATH -- hardcode_runpath_var=yes -- ld_shlibs_F77=yes -- fi -- ;; -+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we -+ find out it does not work in some platform. */ -+#ifndef LT_DLLAZY_OR_NOW -+# ifdef RTLD_LAZY -+# define LT_DLLAZY_OR_NOW RTLD_LAZY -+# else -+# ifdef DL_LAZY -+# define LT_DLLAZY_OR_NOW DL_LAZY -+# else -+# ifdef RTLD_NOW -+# define LT_DLLAZY_OR_NOW RTLD_NOW -+# else -+# ifdef DL_NOW -+# define LT_DLLAZY_OR_NOW DL_NOW -+# else -+# define LT_DLLAZY_OR_NOW 0 -+# endif -+# endif -+# endif -+# endif -+#endif +-if test -n "$prevopt"; then +- $echo "$modename: option \`$prevopt' requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +-fi -- sysv4.2uw2*) -- archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct_F77=yes -- hardcode_minus_L_F77=no -- hardcode_shlibpath_var_F77=no -- hardcode_runpath_var=yes -- runpath_var=LD_RUN_PATH -- ;; -+void fnord() { int i=42;} -+int main () +-# If this variable is set in any of the actions, the command in it +-# will be execed at the end. This prevents here-documents from being +-# left over by shells. +-exec_cmd= ++# func_quote_for_expand arg ++# Aesthetically quote ARG to be evaled later; same as above, ++# but do not quote variable references. ++func_quote_for_expand () +{ -+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -+ int status = $lt_dlunknown; ++ case $1 in ++ *[\\\`\"]*) ++ my_arg=`$ECHO "X$1" | $Xsed \ ++ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; ++ *) ++ my_arg="$1" ;; ++ esac -- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) -- no_undefined_flag_F77='${wl}-z ${wl}text' -- if test "$GCC" = yes; then -- archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- else -- archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- fi -- runpath_var='LD_RUN_PATH' -- hardcode_shlibpath_var_F77=no +-if test -z "$show_help"; then ++ case $my_arg in ++ # Double-quote args containing shell metacharacters to delay ++ # word splitting and command substitution for a subsequent eval. ++ # Many Bourne shells cannot handle close brackets correctly ++ # in scan sets, so we specify it separately. ++ *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ my_arg="\"$my_arg\"" ++ ;; ++ esac + +- # Infer the operation mode. +- if test -z "$mode"; then +- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 +- $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2 +- case $nonopt in +- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) +- mode=link +- for arg +- do +- case $arg in +- -c) +- mode=compile +- break +- ;; +- esac +- done - ;; -+ if (self) -+ { -+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -+ /* dlclose (self); */ -+ } -+ else -+ puts (dlerror ()); - -- sysv5*) -- no_undefined_flag_F77=' -z text' -- # $CC -shared without GNU ld will not create a library from C++ -- # object files and a static libstdc++, better avoid it by now -- archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' -- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' -- hardcode_libdir_flag_spec_F77= -- hardcode_shlibpath_var_F77=no -- runpath_var='LD_RUN_PATH' +- *db | *dbx | *strace | *truss) +- mode=execute - ;; -- -- uts4*) -- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_libdir_flag_spec_F77='-L$libdir' -- hardcode_shlibpath_var_F77=no +- *install*|cp|mv) +- mode=install - ;; -- -- *) -- ld_shlibs_F77=no +- *rm) +- mode=uninstall - ;; -+ return status; +- *) +- # If we have no mode, but dlfiles were specified, then do execute mode. +- test -n "$execute_dlfiles" && mode=execute ++ func_quote_for_expand_result="$my_arg" +} -+_LT_EOF -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 -+ (eval $ac_link) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then -+ (./conftest; exit; ) >&5 2>/dev/null -+ lt_status=$? -+ case x$lt_status in -+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; -+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; -+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac -+ else : -+ # compilation failed -+ lt_cv_dlopen_self_static=no - fi -+fi -+rm -fr conftest* - --echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 --echo "${ECHO_T}$ld_shlibs_F77" >&6 --test "$ld_shlibs_F77" = no && can_build_shared=no - --variables_saved_for_relink="PATH $shlibpath_var $runpath_var" --if test "$GCC" = yes; then -- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" - fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -+$as_echo "$lt_cv_dlopen_self_static" >&6; } -+ fi - --# --# Do we need to explicitly link libc? --# --case "x$archive_cmds_need_lc_F77" in --x|xyes) -- # Assume -lc should be added -- archive_cmds_need_lc_F77=yes -- -- if test "$enable_shared" = yes && test "$GCC" = yes; then -- case $archive_cmds_F77 in -- *'~'*) -- # FIXME: we may have to deal with multi-command sequences. -- ;; -- '$CC '*) -- # Test whether the compiler implicitly links with -lc since on some -- # systems, -lgcc has to come before -lc. If gcc already passes -lc -- # to ld, don't add -lc before -lgcc. -- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 --echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 -- $rm conftest* -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -+ CPPFLAGS="$save_CPPFLAGS" -+ LDFLAGS="$save_LDFLAGS" -+ LIBS="$save_LIBS" -+ ;; -+ esac -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } 2>conftest.err; then -- soname=conftest -- lib=conftest -- libobjs=conftest.$ac_objext -- deplibs= -- wl=$lt_prog_compiler_wl_F77 -- compiler_flags=-v -- linker_flags=-v -- verstring= -- output_objdir=. -- libname=conftest -- lt_save_allow_undefined_flag=$allow_undefined_flag_F77 -- allow_undefined_flag_F77= -- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 -- (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } -- then -- archive_cmds_need_lc_F77=no -- else -- archive_cmds_need_lc_F77=yes -- fi -- allow_undefined_flag_F77=$lt_save_allow_undefined_flag -- else -- cat conftest.err 1>&5 -- fi -- $rm conftest* -- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 --echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6 +- # Just use the default operation mode. +- if test -z "$mode"; then +- if test -n "$nonopt"; then +- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 +- else +- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 +- fi ++ ++# func_show_eval cmd [fail_exp] ++# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is ++# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP ++# is given, then evaluate it. ++func_show_eval () ++{ ++ my_cmd="$1" ++ my_fail_exp="${2-:}" ++ ++ ${opt_silent-false} || { ++ func_quote_for_expand "$my_cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ ++ if ${opt_dry_run-false}; then :; else ++ eval "$my_cmd" ++ my_status=$? ++ if test "$my_status" -eq 0; then :; else ++ eval "(exit $my_status); $my_fail_exp" + fi - ;; - esac - fi -- ;; --esac -+ case $lt_cv_dlopen_self in -+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; -+ *) enable_dlopen_self=unknown ;; -+ esac ++ fi ++} --echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 --echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 --library_names_spec= --libname_spec='lib$name' --soname_spec= --shrext_cmds=".so" --postinstall_cmds= --postuninstall_cmds= --finish_cmds= --finish_eval= --shlibpath_var= --shlibpath_overrides_runpath=unknown --version_type=none --dynamic_linker="$host_os ld.so" --sys_lib_dlsearch_path_spec="/lib /usr/lib" --if test "$GCC" = yes; then -- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then -- # if the path contains ";" then we assume it to be the separator -- # otherwise default to the standard path separator (i.e. ":") - it is -- # assumed that no part of a normal pathname contains ";" but that should -- # okay in the real world where ";" in dirpaths is itself problematic. -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -- else -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- # Only execute mode is allowed to have -dlopen flags. +- if test -n "$execute_dlfiles" && test "$mode" != execute; then +- $echo "$modename: unrecognized option \`-dlopen'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE - fi --else -- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -+ case $lt_cv_dlopen_self_static in -+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; -+ *) enable_dlopen_self_static=unknown ;; -+ esac - fi --need_lib_prefix=unknown --hardcode_into_libs=no - --# when you set need_version to no, make sure it does not cause -set_version --# flags to be left without arguments --need_version=unknown --case $host_os in --aix3*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' -- shlibpath_var=LIBPATH +- # Change the help message to a mode-specific one. +- generic_help="$help" +- help="Try \`$modename --help --mode=$mode' for more information." ++# func_show_eval_locale cmd [fail_exp] ++# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is ++# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP ++# is given, then evaluate it. Use the saved locale for evaluation. ++func_show_eval_locale () ++{ ++ my_cmd="$1" ++ my_fail_exp="${2-:}" -- # AIX 3 has no versioning support, so we append a major version to the name. -- soname_spec='${libname}${release}${shared_ext}$major' -- ;; +- # These modes are in order of execution frequency so that they run quickly. +- case $mode in +- # libtool compile mode +- compile) +- modename="$modename: compile" +- # Get the compilation command and the source file. +- base_compile= +- srcfile="$nonopt" # always keep a non-empty value in "srcfile" +- suppress_opt=yes +- suppress_output= +- arg_mode=normal +- libobj= +- later= ++ ${opt_silent-false} || { ++ func_quote_for_expand "$my_cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ ++ if ${opt_dry_run-false}; then :; else ++ eval "$lt_user_locale ++ $my_cmd" ++ my_status=$? ++ eval "$lt_safe_locale" ++ if test "$my_status" -eq 0; then :; else ++ eval "(exit $my_status); $my_fail_exp" ++ fi ++ fi ++} --aix4* | aix5*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- hardcode_into_libs=yes -- if test "$host_cpu" = ia64; then -- # AIX 5 supports IA64 -- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- else -- # With GCC up to 2.95.x, collect2 would create an import file -- # for dependence libraries. The import file would start with -- # the line `#! .'. This would cause the generated library to -- # depend on `.', always an invalid library. This was fixed in -- # development snapshots of GCC prior to 3.0. -- case $host_os in -- aix4 | aix4.[01] | aix4.[01].*) -- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' -- echo ' yes ' -- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then -- : -- else -- can_build_shared=no -- fi -- ;; -- esac -- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct -- # soname into executable. Probably we can add versioning support to -- # collect2, so additional links can be useful in future. -- if test "$aix_use_runtimelinking" = yes; then -- # If using run time linking (on AIX 4.2 or later) use lib.so -- # instead of lib.a to let people know that these are not -- # typical AIX shared libraries. -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- else -- # We preserve .a as extension for shared libraries through AIX4.2 -- # and later when we are not doing run time linking. -- library_names_spec='${libname}${release}.a $libname.a' -- soname_spec='${libname}${release}${shared_ext}$major' -- fi -- shlibpath_var=LIBPATH -- fi -- ;; +- for arg +- do +- case "$arg_mode" in +- arg ) +- # do not "continue". Instead, add this to base_compile +- lastarg="$arg" +- arg_mode=normal +- ;; --amigaos*) -- library_names_spec='$libname.ixlibrary $libname.a' -- # Create ${libname}_ixlibrary.a entries in /sys/libs. -- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' -- ;; +- target ) +- libobj="$arg" +- arg_mode=normal +- continue +- ;; --beos*) -- library_names_spec='${libname}${shared_ext}' -- dynamic_linker="$host_os ld.so" -- shlibpath_var=LIBRARY_PATH -- ;; +- normal ) +- # Accept any command-line options. +- case $arg in +- -o) +- if test -n "$libobj" ; then +- $echo "$modename: you cannot specify \`-o' more than once" 1>&2 +- exit $EXIT_FAILURE +- fi +- arg_mode=target +- continue +- ;; --bsdi4*) -- version_type=linux -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" -- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" -- # the default ld.so.conf also contains /usr/contrib/lib and -- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow -- # libtool to hard-code these into programs -- ;; +- -static | -prefer-pic | -prefer-non-pic) +- later="$later $arg" +- continue +- ;; --cygwin* | mingw* | pw32*) -- version_type=windows -- shrext_cmds=".dll" -- need_version=no -- need_lib_prefix=no +- -no-suppress) +- suppress_opt=no +- continue +- ;; ++# func_version ++# Echo version message to standard output and exit. ++func_version () ++{ ++ $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { ++ s/^# // ++ s/^# *$// ++ s/$(C)$[ 0-9,-]*$ [1-9][0-9]*$/\1\2/ ++ p ++ }' < "$progpath" ++ exit $? ++} -- case $GCC,$host_os in -- yes,cygwin* | yes,mingw* | yes,pw32*) -- library_names_spec='$libname.dll.a' -- # DLL is installed to $(libdir)/../bin by postinstall_cmds -- postinstall_cmds='base_file=`basename \${file}`~ -- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ -- dldir=$destdir/`dirname \$dlpath`~ -- test -d \$dldir || mkdir -p \$dldir~ -- $install_prog $dir/$dlname \$dldir/$dlname' -- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ -- dlpath=$dir/\$dldll~ -- $rm \$dlpath' -- shlibpath_overrides_runpath=yes +- -Xcompiler) +- arg_mode=arg # the next one goes into the "base_compile" arg list +- continue # The current "srcfile" will either be retained or +- ;; # replaced later. I would guess that would be a bug. ++# func_usage ++# Echo short help message to standard output and exit. ++func_usage () ++{ ++ $SED -n '/^# Usage:/,/# -h/ { ++ s/^# // ++ s/^# *$// ++ s/\$progname/'$progname'/ ++ p ++ }' < "$progpath" ++ $ECHO ++ $ECHO "run \`$progname --help | more' for full usage" ++ exit $? ++} -- case $host_os in -- cygwin*) -- # Cygwin DLLs use 'cyg' prefix rather than 'lib' -- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" -- ;; -- mingw*) -- # MinGW DLLs use traditional 'lib' prefix -- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then -- # It is most probably a Windows format PATH printed by -- # mingw gcc, but we are running on Cygwin. Gcc prints its search -- # path with ; separators, and with drive letters. We can handle the -- # drive letters (cygwin fileutils understands them), so leave them, -- # especially as we might pass files found there to a mingw objdump, -- # which wouldn't understand a cygwinified path. Ahh. -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -- else -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -- fi -- ;; -- pw32*) -- # pw32 DLLs use 'pw' prefix rather than 'lib' -- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' -- ;; -- esac -- ;; +- -Wc,*) +- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` +- lastarg= +- save_ifs="$IFS"; IFS=',' +- for arg in $args; do +- IFS="$save_ifs" ++# func_help ++# Echo long help message to standard output and exit. ++func_help () ++{ ++ $SED -n '/^# Usage:/,/# Report bugs to/ { ++ s/^# // ++ s/^# *$// ++ s*\$progname*'$progname'* ++ s*\$host*'"$host"'* ++ s*\$SHELL*'"$SHELL"'* ++ s*\$LTCC*'"$LTCC"'* ++ s*\$LTCFLAGS*'"$LTCFLAGS"'* ++ s*\$LD*'"$LD"'* ++ s/\$with_gnu_ld/'"$with_gnu_ld"'/ ++ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ ++ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ ++ p ++ }' < "$progpath" ++ exit $? ++} -+ -+ -+ -+ -+ -+ -+striplib= -+old_striplib= -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -+$as_echo_n "checking whether stripping libraries is possible... " >&6; } -+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then -+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" -+ test -z "$striplib" && striplib="$STRIP --strip-unneeded" -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -+$as_echo "yes" >&6; } -+else -+# FIXME - insert some real tests, host_os isn't really good enough -+ case $host_os in -+ darwin*) -+ if test -n "$STRIP" ; then -+ striplib="$STRIP -x" -+ old_striplib="$STRIP -S" -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -+$as_echo "yes" >&6; } -+ else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+ fi -+ ;; - *) -- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - ;; - esac -- dynamic_linker='Win32 ld.exe' -- # FIXME: first we should search . and the directory the executable is in -- shlibpath_var=PATH -- ;; -+fi +- # Double-quote args containing other shell metacharacters. +- # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, so we specify it separately. +- case $arg in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- lastarg="$lastarg $arg" +- done +- IFS="$save_ifs" +- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` ++# func_missing_arg argname ++# Echo program name prefixed message to standard error and set global ++# exit_cmd. ++func_missing_arg () ++{ ++ func_error "missing argument for $1" ++ exit_cmd=exit ++} --darwin* | rhapsody*) -- dynamic_linker="$host_os dyld" -- version_type=darwin -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' -- soname_spec='${libname}${release}${major}$shared_ext' -- shlibpath_overrides_runpath=yes -- shlibpath_var=DYLD_LIBRARY_PATH -- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' -- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. -- if test "$GCC" = yes; then -- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` -- else -- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' -- fi -- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' -- ;; +- # Add the arguments to base_compile. +- base_compile="$base_compile $lastarg" +- continue +- ;; ++exit_cmd=: --dgux*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- ;; +- * ) +- # Accept the current argument as the source file. +- # The previous "srcfile" becomes the current argument. +- # +- lastarg="$srcfile" +- srcfile="$arg" +- ;; +- esac # case $arg +- ;; +- esac # case $arg_mode --freebsd1*) -- dynamic_linker=no -- ;; +- # Aesthetically quote the previous argument. +- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` --kfreebsd*-gnu) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- dynamic_linker='GNU ld.so' -- ;; +- case $lastarg in +- # Double-quote args containing other shell metacharacters. +- # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, so we specify it separately. +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- lastarg="\"$lastarg\"" +- ;; +- esac --freebsd*) -- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` -- version_type=freebsd-$objformat -- case $version_type in -- freebsd-elf*) -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -- need_version=no -- need_lib_prefix=no +- base_compile="$base_compile $lastarg" +- done # for arg + +- case $arg_mode in +- arg) +- $echo "$modename: you must specify an argument for -Xcompile" +- exit $EXIT_FAILURE - ;; -- freebsd-*) -- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' -- need_version=yes +- target) +- $echo "$modename: you must specify a target with \`-o'" 1>&2 +- exit $EXIT_FAILURE - ;; -- esac -- shlibpath_var=LD_LIBRARY_PATH -- case $host_os in -- freebsd2*) -- shlibpath_overrides_runpath=yes -- ;; -- freebsd3.01* | freebsdelf3.01*) -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -- ;; -- *) # from 3.2 on -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- ;; -- esac -- ;; +- *) +- # Get the name of the library object. +- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` +- ;; +- esac ++# Check that we have a working $ECHO. ++if test "X$1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++elif test "X$1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then ++ # Yippee, $ECHO works! ++ : ++else ++ # Restart under the correct shell, and then maybe $ECHO will work. ++ exec $SHELL "$progpath" --no-reexec ${1+"$@"} ++fi --gnu*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- hardcode_into_libs=yes -- ;; +- # Recognize several different file suffixes. +- # If the user specifies -o file.o, it is replaced with file.lo +- xform='[cCFSifmso]' +- case $libobj in +- *.ada) xform=ada ;; +- *.adb) xform=adb ;; +- *.ads) xform=ads ;; +- *.asm) xform=asm ;; +- *.c++) xform=c++ ;; +- *.cc) xform=cc ;; +- *.ii) xform=ii ;; +- *.class) xform=class ;; +- *.cpp) xform=cpp ;; +- *.cxx) xform=cxx ;; +- *.f90) xform=f90 ;; +- *.for) xform=for ;; +- *.java) xform=java ;; +- esac ++if test "X$1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat <&2 +- exit $EXIT_FAILURE +- ;; - esac -- ;; -- esac -- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH -- shlibpath_overrides_runpath=no -- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" -- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" -- hardcode_into_libs=yes -- ;; ++# Global variables. ++# $mode is unset ++nonopt= ++execute_dlfiles= ++preserve_args= ++lo2o="s/\\.lo\$/.${objext}/" ++o2lo="s/\\.${objext}\$/.lo/" ++extracted_archives= ++extracted_serial=0 --# No shared lib support for Linux oldld, aout, or coff. --linux*oldld* | linux*aout* | linux*coff*) -- dynamic_linker=no -- ;; +- func_infer_tag $base_compile ++opt_dry_run=false ++opt_duplicate_deps=false ++opt_silent=false ++opt_debug=: --# This must be Linux ELF. --linux*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- # This implies no fast_install, which is unacceptable. -- # Some rework will be needed to allow for fast_install -- # before this can be enabled. -- hardcode_into_libs=yes +- for arg in $later; do +- case $arg in +- -static) +- build_old_libs=yes +- continue +- ;; ++# If this variable is set in any of the actions, the command in it ++# will be execed at the end. This prevents here-documents from being ++# left over by shells. ++exec_cmd= -- # find out which ABI we are using -- libsuff= -- case "$host_cpu" in -- x86_64*|s390x*|powerpc64*) -- echo '#line 14785 "configure"' > conftest.$ac_ext -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- case `/usr/bin/file conftest.$ac_objext` in -- *64-bit*) -- libsuff=64 -- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" -- ;; +- -prefer-pic) +- pic_mode=yes +- continue +- ;; ++# func_fatal_configuration arg... ++# Echo program name prefixed message to standard error, followed by ++# a configuration failure hint, and exit. ++func_fatal_configuration () ++{ ++ func_error ${1+"$@"} ++ func_error "See the $PACKAGE documentation for more information." ++ func_fatal_error "Fatal configuration error." ++} + +- -prefer-non-pic) +- pic_mode=no +- continue +- ;; - esac + -+ # Report which library types will actually be built -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -+$as_echo_n "checking if libtool supports shared libraries... " >&6; } -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -+$as_echo "$can_build_shared" >&6; } -+ -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -+$as_echo_n "checking whether to build shared libraries... " >&6; } -+ test "$can_build_shared" = "no" && enable_shared=no ++# func_config ++# Display the configuration for all the tags in this script. ++func_config () ++{ ++ re_begincf='^# ### BEGIN LIBTOOL' ++ re_endcf='^# ### END LIBTOOL' + -+ # On AIX, shared libraries and static libraries use the same namespace, and -+ # are all built from PIC. -+ case $host_os in -+ aix3*) -+ test "$enable_shared" = yes && enable_static=no -+ if test -n "$RANLIB"; then -+ archive_cmds="$archive_cmds~\$RANLIB \$lib" -+ postinstall_cmds='$RANLIB $lib' -+ fi -+ ;; ++ # Default configuration. ++ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + -+ aix[4-9]*) -+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then -+ test "$enable_shared" = yes && enable_static=no ++ # Now print the configurations for the tags. ++ for tagname in $taglist; do ++ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + +- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` +- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$obj"; then +- xdir= +- else +- xdir=$xdir/ +- fi +- lobj=${xdir}$objdir/$objname ++ exit $? ++} + +- if test -z "$base_compile"; then +- $echo "$modename: you must specify a compilation command" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++# func_features ++# Display the features supported by this script. ++func_features () ++{ ++ $ECHO "host: $host" ++ if test "$build_libtool_libs" = yes; then ++ $ECHO "enable shared libraries" ++ else ++ $ECHO "disable shared libraries" fi -- rm -rf conftest* - ;; - esac -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -+$as_echo "$enable_shared" >&6; } +- +- # Delete any leftover library objects. + if test "$build_old_libs" = yes; then +- removelist="$obj $lobj $libobj ${libobj}T" ++ $ECHO "enable static libraries" + else +- removelist="$lobj $libobj ${libobj}T" ++ $ECHO "disable static libraries" + fi + +- $run $rm $removelist +- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 ++ exit $? ++} + +- # On Cygwin there's no "real" PIC flag so we must build both object types +- case $host_os in +- cygwin* | mingw* | pw32* | os2*) +- pic_mode=default ++# func_enable_tag tagname ++# Verify that TAGNAME is valid, and either flag an error and exit, or ++# enable the TAGNAME tag. We also add TAGNAME to the global $taglist ++# variable here. ++func_enable_tag () ++{ ++ # Global variable: ++ tagname="$1" ++ ++ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" ++ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" ++ sed_extractcf="/$re_begincf/,/$re_endcf/p" ++ ++ # Validate tagname. ++ case $tagname in ++ *[!-_A-Za-z0-9,/]*) ++ func_fatal_error "invalid tag name: $tagname" + ;; +- esac +- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then +- # non-PIC code in shared libraries is not supported +- pic_mode=default +- fi ++ esac + +- # Calculate the filename of the output object if compiler does +- # not support -o with -c +- if test "$compiler_c_o" = no; then +- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} +- lockfile="$output_obj.lock" +- removelist="$removelist $output_obj $lockfile" +- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 +- else +- output_obj= +- need_locks=no +- lockfile= +- fi ++ # Don't test for the "default" C tag, as we know it's ++ # there but not specially marked. ++ case $tagname in ++ CC) ;; ++ *) ++ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then ++ taglist="$taglist $tagname" + +- # Lock this critical section if it is needed +- # We use this script file to make the link, it avoids creating a new file +- if test "$need_locks" = yes; then +- until $run ln "$progpath" "$lockfile" 2>/dev/null; do +- $show "Waiting for $lockfile to be removed" +- sleep 2 +- done +- elif test "$need_locks" = warn; then +- if test -f "$lockfile"; then +- $echo "\ +-*** ERROR, $lockfile exists and contains: +-`cat $lockfile 2>/dev/null` ++ # Evaluate the configuration. Be careful to quote the path ++ # and the sed script, to avoid splitting on whitespace, but ++ # also don't use non-portable quotes within backquotes within ++ # quotes we have to do it in 2 steps: ++ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` ++ eval "$extractedcf" ++ else ++ func_error "ignoring unknown tag $tagname" ++ fi ++ ;; ++ esac ++} + +-This indicates that another process is trying to use the same +-temporary object file, and libtool could not work around it because +-your compiler does not support \`-c' and \`-o' together. If you +-repeat this compilation, it may succeed, by chance, but you had better +-avoid parallel builds (make -j) in this platform, or get a better +-compiler." ++# Parse options once, thoroughly. This comes as soon as possible in ++# the script to make things like `libtool --version' happen quickly. ++{ + +- $run $rm $removelist +- exit $EXIT_FAILURE +- fi +- $echo $srcfile > "$lockfile" +- fi ++ # Shorthand for --mode=foo, only valid as the first argument ++ case $1 in ++ clean|clea|cle|cl) ++ shift; set dummy --mode clean ${1+"$@"}; shift ++ ;; ++ compile|compil|compi|comp|com|co|c) ++ shift; set dummy --mode compile ${1+"$@"}; shift ++ ;; ++ execute|execut|execu|exec|exe|ex|e) ++ shift; set dummy --mode execute ${1+"$@"}; shift ++ ;; ++ finish|finis|fini|fin|fi|f) ++ shift; set dummy --mode finish ${1+"$@"}; shift ++ ;; ++ install|instal|insta|inst|ins|in|i) ++ shift; set dummy --mode install ${1+"$@"}; shift ++ ;; ++ link|lin|li|l) ++ shift; set dummy --mode link ${1+"$@"}; shift ++ ;; ++ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) ++ shift; set dummy --mode uninstall ${1+"$@"}; shift ++ ;; ++ esac -- # Append ld.so.conf contents to the search path -- if test -f /etc/ld.so.conf; then -- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` -- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" -- fi -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -+$as_echo_n "checking whether to build static libraries... " >&6; } -+ # Make sure either enable_shared or enable_static is yes. -+ test "$enable_shared" = yes || enable_static=yes -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -+$as_echo "$enable_static" >&6; } +- if test -n "$fix_srcfile_path"; then +- eval srcfile=\"$fix_srcfile_path\" +- fi ++ # Parse non-mode specific arguments: ++ while test "$#" -gt 0; do ++ opt="$1" ++ shift -- # We used to test for /lib/ld.so.1 and disable shared libraries on -- # powerpc, because MkLinux only supported shared libraries with the -- # GNU dynamic linker. Since this was broken with cross compilers, -- # most powerpc-linux boxes support dynamic linking these days and -- # people can always --disable-shared, the test was removed, and we -- # assume the GNU/Linux dynamic linker is in use. -- dynamic_linker='GNU/Linux ld.so' -- ;; +- $run $rm "$libobj" "${libobj}T" ++ case $opt in ++ --config) func_config ;; --knetbsd*-gnu) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- dynamic_linker='GNU ld.so' -- ;; +- # Create a libtool object file (analogous to a ".la" file), +- # but don't create it if we're doing a dry run. +- test -z "$run" && cat > ${libobj}T </dev/null; then -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -- dynamic_linker='NetBSD (a.out) ld.so' -- else -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- dynamic_linker='NetBSD ld.elf_so' -- fi -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -- ;; +-# Name of the PIC object. +-EOF ++ -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break ++ execute_dlfiles="$execute_dlfiles $1" ++ shift ++ ;; --newsos6) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- ;; -+fi -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu +- # Only build a PIC object if we are building libtool libraries. +- if test "$build_libtool_libs" = yes; then +- # Without this assignment, base_compile gets emptied. +- fbsd_hideous_sh_bug=$base_compile ++ --dry-run | -n) opt_dry_run=: ;; ++ --features) func_features ;; ++ --finish) mode="finish" ;; ++ ++ --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break ++ case $1 in ++ # Valid mode arguments: ++ clean) ;; ++ compile) ;; ++ execute) ;; ++ finish) ;; ++ install) ;; ++ link) ;; ++ relink) ;; ++ uninstall) ;; ++ ++ # Catch anything else as an error ++ *) func_error "invalid argument for $opt" ++ exit_cmd=exit ++ break ++ ;; ++ esac --nto-qnx*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- ;; -+CC="$lt_save_CC" +- if test "$pic_mode" != no; then +- command="$base_compile $srcfile $pic_flag" +- else +- # Don't build PIC code +- command="$base_compile $srcfile" +- fi ++ mode="$1" ++ shift ++ ;; --openbsd*) -- version_type=sunos -- need_lib_prefix=no -- need_version=yes -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -- case $host_os in -- openbsd2.[89] | openbsd2.[89].*) -- shlibpath_overrides_runpath=no -- ;; -- *) -- shlibpath_overrides_runpath=yes -- ;; -- esac -- else -- shlibpath_overrides_runpath=yes -- fi -- ;; +- if test ! -d "${xdir}$objdir"; then +- $show "$mkdir ${xdir}$objdir" +- $run $mkdir ${xdir}$objdir +- status=$? +- if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then +- exit $status +- fi +- fi ++ --preserve-dup-deps) ++ opt_duplicate_deps=: ;; --os2*) -- libname_spec='$name' -- shrext_cmds=".dll" -- need_lib_prefix=no -- library_names_spec='$libname${shared_ext} $libname.a' -- dynamic_linker='OS/2 ld.exe' -- shlibpath_var=LIBPATH -- ;; -+ac_ext=cpp -+ac_cpp='$CXXCPP $CPPFLAGS' -+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +- if test -z "$output_obj"; then +- # Place PIC objects in $objdir +- command="$command -o $lobj" +- fi ++ --quiet|--silent) preserve_args="$preserve_args $opt" ++ opt_silent=: ++ ;; --osf3* | osf4* | osf5*) -- version_type=osf -- need_lib_prefix=no -- need_version=no -- soname_spec='${libname}${release}${shared_ext}$major' -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" -- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" -- ;; -+archive_cmds_need_lc_CXX=no -+allow_undefined_flag_CXX= -+always_export_symbols_CXX=no -+archive_expsym_cmds_CXX= -+compiler_needs_object_CXX=no -+export_dynamic_flag_spec_CXX= -+hardcode_direct_CXX=no -+hardcode_direct_absolute_CXX=no -+hardcode_libdir_flag_spec_CXX= -+hardcode_libdir_flag_spec_ld_CXX= -+hardcode_libdir_separator_CXX= -+hardcode_minus_L_CXX=no -+hardcode_shlibpath_var_CXX=unsupported -+hardcode_automatic_CXX=no -+inherit_rpath_CXX=no -+module_cmds_CXX= -+module_expsym_cmds_CXX= -+link_all_deplibs_CXX=unknown -+old_archive_cmds_CXX=$old_archive_cmds -+no_undefined_flag_CXX= -+whole_archive_flag_spec_CXX= -+enable_shared_with_static_runtimes_CXX=no +- $run $rm "$lobj" "$output_obj" ++ --verbose| -v) preserve_args="$preserve_args $opt" ++ opt_silent=false ++ ;; --sco3.2v5*) -- version_type=osf -- soname_spec='${libname}${release}${shared_ext}$major' -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- ;; -+# Source file extension for C++ test sources. -+ac_ext=cpp +- $show "$command" +- if $run eval "$command"; then : +- else +- test -n "$output_obj" && $run $rm $removelist +- exit $EXIT_FAILURE +- fi ++ --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break ++ preserve_args="$preserve_args $opt $1" ++ func_enable_tag "$1" # tagname is set here ++ shift ++ ;; --solaris*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -- # ldd complains unless libraries are executable -- postinstall_cmds='chmod +x $lib' -- ;; -+# Object file extension for compiled C++ test sources. -+objext=o -+objext_CXX=$objext +- if test "$need_locks" = warn && +- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then +- $echo "\ +-*** ERROR, $lockfile contains: +-`cat $lockfile 2>/dev/null` ++ # Separate optargs to long options: ++ -dlopen=*|--mode=*|--tag=*) ++ func_opt_split "$opt" ++ set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} ++ shift ++ ;; --sunos4*) -- version_type=sunos -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- if test "$with_gnu_ld" = yes; then -- need_lib_prefix=no -- fi -- need_version=yes -- ;; -+# No sense in running all these tests if we already determined that -+# the CXX compiler isn't working. Some variables (like enable_shared) -+# are currently assumed to apply to all compilers on this platform, -+# and will be corrupted by setting them based on a non-working compiler. -+if test "$_lt_caught_CXX_error" != yes; then -+ # Code to be used in simple compile tests -+ lt_simple_compile_test_code="int some_variable = 0;" +-but it should contain: +-$srcfile ++ -\?|-h) func_usage ;; ++ --help) opt_help=: ;; ++ --version) func_version ;; --sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- case $host_vendor in -- sni) -- shlibpath_overrides_runpath=no -- need_lib_prefix=no -- export_dynamic_flag_spec='${wl}-Blargedynsym' -- runpath_var=LD_RUN_PATH -- ;; -- siemens) -- need_lib_prefix=no -- ;; -- motorola) -- need_lib_prefix=no -- need_version=no -- shlibpath_overrides_runpath=no -- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' -- ;; -- esac -- ;; -+ # Code to be used in simple link tests -+ lt_simple_link_test_code='int main(int, char *[]) { return(0); }' +-This indicates that another process is trying to use the same +-temporary object file, and libtool could not work around it because +-your compiler does not support \`-c' and \`-o' together. If you +-repeat this compilation, it may succeed, by chance, but you had better +-avoid parallel builds (make -j) in this platform, or get a better +-compiler." ++ -*) func_fatal_help "unrecognized option \`$opt'" ;; --sysv4*MP*) -- if test -d /usr/nec ;then -- version_type=linux -- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' -- soname_spec='$libname${shared_ext}.$major' -- shlibpath_var=LD_LIBRARY_PATH -- fi -- ;; -+ # ltmain only uses $CC for tagged configurations so make sure $CC is set. +- $run $rm $removelist +- exit $EXIT_FAILURE +- fi ++ *) nonopt="$opt" ++ break ++ ;; ++ esac ++ done --uts4*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- ;; +- # Just move the object if needed, then go on to compile the next one +- if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then +- $show "$mv $output_obj $lobj" +- if $run $mv $output_obj $lobj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi +- fi --*) -- dynamic_linker=no -- ;; --esac --echo "$as_me:$LINENO: result: $dynamic_linker" >&5 --echo "${ECHO_T}$dynamic_linker" >&6 --test "$dynamic_linker" = no && can_build_shared=no +- # Append the name of the PIC object to the libtool object file. +- test -z "$run" && cat >> ${libobj}T <&5 --echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 --hardcode_action_F77= --if test -n "$hardcode_libdir_flag_spec_F77" || \ -- test -n "$runpath_var F77" || \ -- test "X$hardcode_automatic_F77"="Xyes" ; then +-EOF ++ # Having warned about all mis-specified options, bail out if ++ # anything was wrong. ++ $exit_cmd $EXIT_FAILURE ++} -- # We can hardcode non-existant directories. -- if test "$hardcode_direct_F77" != no && -- # If the only mechanism to avoid hardcoding is shlibpath_var, we -- # have to relink, otherwise we might link with an installed library -- # when we should be linking with a yet-to-be-installed one -- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && -- test "$hardcode_minus_L_F77" != no; then -- # Linking always hardcodes the temporary library directory. -- hardcode_action_F77=relink -- else -- # We can link without hardcoding, and we can hardcode nonexisting dirs. -- hardcode_action_F77=immediate -- fi --else -- # We cannot hardcode anything, or else we can only hardcode existing -- # directories. -- hardcode_action_F77=unsupported --fi --echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 --echo "${ECHO_T}$hardcode_action_F77" >&6 +- # Allow error messages only from the first compilation. +- if test "$suppress_opt" = yes; then +- suppress_output=' >/dev/null 2>&1' ++# func_check_version_match ++# Ensure that we are using m4 macros, and libtool script from the same ++# release of libtool. ++func_check_version_match () ++{ ++ if test "$package_revision" != "$macro_revision"; then ++ if test "$VERSION" != "$macro_version"; then ++ if test -z "$macro_version"; then ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the ++$progname: definition of this LT_INIT comes from an older release. ++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION ++$progname: and run autoconf again. ++_LT_EOF ++ else ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the ++$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. ++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION ++$progname: and run autoconf again. ++_LT_EOF + fi + else +- # No PIC object so indicate it doesn't exist in the libtool +- # object file. +- test -z "$run" && cat >> ${libobj}T <&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, ++$progname: but the definition of this LT_INIT comes from revision $macro_revision. ++$progname: You should recreate aclocal.m4 with macros from revision $package_revision ++$progname: of $PACKAGE $VERSION and run autoconf again. ++_LT_EOF + fi --if test "$hardcode_action_F77" = relink; then -- # Fast installation is not supported -- enable_fast_install=no --elif test "$shlibpath_overrides_runpath" = yes || -- test "$enable_shared" = no; then -- # Fast installation is not necessary -- enable_fast_install=needless --fi +- # Only build a position-dependent object if we build old libraries. +- if test "$build_old_libs" = yes; then +- if test "$pic_mode" != yes; then +- # Don't build PIC code +- command="$base_compile $srcfile" +- else +- command="$base_compile $srcfile $pic_flag" +- fi +- if test "$compiler_c_o" = yes; then +- command="$command -o $obj" +- fi ++ exit $EXIT_MISMATCH ++ fi ++} --striplib= --old_striplib= --echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 --echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 --if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then -- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" -- test -z "$striplib" && striplib="$STRIP --strip-unneeded" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 --else --# FIXME - insert some real tests, host_os isn't really good enough -- case $host_os in -- darwin*) -- if test -n "$STRIP" ; then -- striplib="$STRIP -x" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -- else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- ;; -- *) -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -- ;; -- esac --fi -+# If no C compiler was specified, use CC. -+LTCC=${LTCC-"$CC"} +- # Suppress compiler output if we already did a PIC compilation. +- command="$command$suppress_output" +- $run $rm "$obj" "$output_obj" +- $show "$command" +- if $run eval "$command"; then : +- else +- $run $rm $removelist +- exit $EXIT_FAILURE +- fi + +- if test "$need_locks" = warn && +- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then +- $echo "\ +-*** ERROR, $lockfile contains: +-`cat $lockfile 2>/dev/null` ++## ----------- ## ++## Main. ## ++## ----------- ## ++ ++$opt_help || { ++ # Sanity checks first: ++ func_check_version_match -+# If no C compiler flags were specified, use CFLAGS. -+LTCFLAGS=${LTCFLAGS-"$CFLAGS"} +-but it should contain: +-$srcfile ++ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then ++ func_fatal_configuration "not configured to build any kind of library" ++ fi -+# Allow CC to be a program name with arguments. -+compiler=$CC +-This indicates that another process is trying to use the same +-temporary object file, and libtool could not work around it because +-your compiler does not support \`-c' and \`-o' together. If you +-repeat this compilation, it may succeed, by chance, but you had better +-avoid parallel builds (make -j) in this platform, or get a better +-compiler." ++ test -z "$mode" && func_fatal_error "error: you must specify a MODE." --# The else clause should only fire when bootstrapping the --# libtool distribution, otherwise you forgot to ship ltmain.sh --# with your package, and you will get complaints that there are --# no rules to generate ltmain.sh. --if test -f "$ltmain"; then -- # See if we are running on zsh, and set the options which allow our commands through -- # without removal of \ escapes. -- if test -n "${ZSH_VERSION+set}" ; then -- setopt NO_GLOB_SUBST -- fi -- # Now quote all the things that may contain metacharacters while being -- # careful not to overquote the AC_SUBSTed values. We take copies of the -- # variables and quote the copies for generation of the libtool script. -- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ -- SED SHELL STRIP \ -- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ -- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ -- deplibs_check_method reload_flag reload_cmds need_locks \ -- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ -- lt_cv_sys_global_symbol_to_c_name_address \ -- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ -- old_postinstall_cmds old_postuninstall_cmds \ -- compiler_F77 \ -- CC_F77 \ -- LD_F77 \ -- lt_prog_compiler_wl_F77 \ -- lt_prog_compiler_pic_F77 \ -- lt_prog_compiler_static_F77 \ -- lt_prog_compiler_no_builtin_flag_F77 \ -- export_dynamic_flag_spec_F77 \ -- thread_safe_flag_spec_F77 \ -- whole_archive_flag_spec_F77 \ -- enable_shared_with_static_runtimes_F77 \ -- old_archive_cmds_F77 \ -- old_archive_from_new_cmds_F77 \ -- predep_objects_F77 \ -- postdep_objects_F77 \ -- predeps_F77 \ -- postdeps_F77 \ -- compiler_lib_search_path_F77 \ -- archive_cmds_F77 \ -- archive_expsym_cmds_F77 \ -- postinstall_cmds_F77 \ -- postuninstall_cmds_F77 \ -- old_archive_from_expsyms_cmds_F77 \ -- allow_undefined_flag_F77 \ -- no_undefined_flag_F77 \ -- export_symbols_cmds_F77 \ -- hardcode_libdir_flag_spec_F77 \ -- hardcode_libdir_flag_spec_ld_F77 \ -- hardcode_libdir_separator_F77 \ -- hardcode_automatic_F77 \ -- module_cmds_F77 \ -- module_expsym_cmds_F77 \ -- lt_cv_prog_compiler_c_o_F77 \ -- exclude_expsyms_F77 \ -- include_expsyms_F77; do -- -- case $var in -- old_archive_cmds_F77 | \ -- old_archive_from_new_cmds_F77 | \ -- archive_cmds_F77 | \ -- archive_expsym_cmds_F77 | \ -- module_cmds_F77 | \ -- module_expsym_cmds_F77 | \ -- old_archive_from_expsyms_cmds_F77 | \ -- export_symbols_cmds_F77 | \ -- extract_expsyms_cmds | reload_cmds | finish_cmds | \ -- postinstall_cmds | postuninstall_cmds | \ -- old_postinstall_cmds | old_postuninstall_cmds | \ -- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) -- # Double-quote double-evaled strings. -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" -- ;; -- *) -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" -- ;; -- esac -- done +- $run $rm $removelist +- exit $EXIT_FAILURE +- fi -- case $lt_echo in -- *'\$0 --fallback-echo"') -- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` -- ;; -- esac -+ # save warnings/boilerplate of simple test code -+ ac_outfile=conftest.$ac_objext -+echo "$lt_simple_compile_test_code" >conftest.$ac_ext -+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -+_lt_compiler_boilerplate=`cat conftest.err` -+$RM conftest* +- # Just move the object if needed +- if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then +- $show "$mv $output_obj $obj" +- if $run $mv $output_obj $obj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi +- fi ++ # Darwin sucks ++ eval std_shrext=\"$shrext_cmds\" --cfgfile="$ofile" -+ ac_outfile=conftest.$ac_objext -+echo "$lt_simple_link_test_code" >conftest.$ac_ext -+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -+_lt_linker_boilerplate=`cat conftest.err` -+$RM -r conftest* +- # Append the name of the non-PIC object the libtool object file. +- # Only append if the libtool object file exists. +- test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 ++ exit $EXIT_FAILURE ++ fi + +-EOF ++ # Change the help message to a mode-specific one. ++ generic_help="$help" ++ help="Try \`$progname --help --mode=$mode' for more information." ++} + + -+ # Allow CC to be a program name with arguments. -+ lt_save_CC=$CC -+ lt_save_LD=$LD -+ lt_save_GCC=$GCC -+ GCC=$GXX -+ lt_save_with_gnu_ld=$with_gnu_ld -+ lt_save_path_LD=$lt_cv_path_LD -+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then -+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx -+ else -+ $as_unset lt_cv_prog_gnu_ld -+ fi -+ if test -n "${lt_cv_path_LDCXX+set}"; then -+ lt_cv_path_LD=$lt_cv_path_LDCXX -+ else -+ $as_unset lt_cv_path_LD -+ fi -+ test -z "${LDCXX+set}" || LD=$LDCXX -+ CC=${CXX-"c++"} -+ compiler=$CC -+ compiler_CXX=$CC -+ for cc_temp in $compiler""; do -+ case $cc_temp in -+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; -+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; -+ \-*) ;; -+ *) break;; -+ esac -+done -+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++# func_lalib_p file ++# True iff FILE is a libtool `.la' library or `.lo' object file. ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_lalib_p () ++{ ++ test -f "$1" && ++ $SED -e 4q "$1" 2>/dev/null \ ++ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 ++} + ++# func_lalib_unsafe_p file ++# True iff FILE is a libtool `.la' library or `.lo' object file. ++# This function implements the same check as func_lalib_p without ++# resorting to external programs. To this end, it redirects stdin and ++# closes it afterwards, without saving the original file descriptor. ++# As a safety measure, use it only where a negative result would be ++# fatal anyway. Works if `file' does not exist. ++func_lalib_unsafe_p () ++{ ++ lalib_p=no ++ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then ++ for lalib_p_l in 1 2 3 4 ++ do ++ read lalib_p_line ++ case "$lalib_p_line" in ++ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; ++ esac ++ done ++ exec 0<&5 5<&- + fi ++ test "$lalib_p" = yes ++} + +- $run $mv "${libobj}T" "${libobj}" ++# func_ltwrapper_script_p file ++# True iff FILE is a libtool wrapper script ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_script_p () ++{ ++ func_lalib_p "$1" ++} + -+ if test -n "$compiler"; then -+ # We don't want -fno-exception when compiling C++ code, so set the -+ # no_builtin_flag separately -+ if test "$GXX" = yes; then -+ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' -+ else -+ lt_prog_compiler_no_builtin_flag_CXX= -+ fi ++# func_ltwrapper_executable_p file ++# True iff FILE is a libtool wrapper executable ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_executable_p () ++{ ++ func_ltwrapper_exec_suffix= ++ case $1 in ++ *.exe) ;; ++ *) func_ltwrapper_exec_suffix=.exe ;; ++ esac ++ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 ++} -- cat <<__EOF__ >> "$cfgfile" --# ### BEGIN LIBTOOL TAG CONFIG: $tagname -+ if test "$GXX" = yes; then -+ # Set up default GNU C++ configuration +- # Unlock the critical section if it was locked +- if test "$need_locks" != no; then +- $run $rm "$lockfile" ++# func_ltwrapper_scriptname file ++# Assumes file is an ltwrapper_executable ++# uses $file to determine the appropriate filename for a ++# temporary ltwrapper_script. ++func_ltwrapper_scriptname () ++{ ++ func_ltwrapper_scriptname_result="" ++ if func_ltwrapper_executable_p "$1"; then ++ func_dirname_and_basename "$1" "" "." ++ func_stripname '' '.exe' "$func_basename_result" ++ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + fi ++} --# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +- exit $EXIT_SUCCESS +- ;; ++# func_ltwrapper_p file ++# True iff FILE is a libtool wrapper script or wrapper executable ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_p () ++{ ++ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" ++} --# Shell to use when invoking shell scripts. --SHELL=$lt_SHELL +- # libtool link mode +- link | relink) +- modename="$modename: link" +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- # It is impossible to link a dll without this setting, and +- # we shouldn't force the makefile maintainer to figure out +- # which system we are compiling for in order to pass an extra +- # flag for every libtool invocation. +- # allow_undefined=no --# Whether or not to build shared libraries. --build_libtool_libs=$enable_shared -+# Check whether --with-gnu-ld was given. -+if test "${with_gnu_ld+set}" = set; then : -+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -+else -+ with_gnu_ld=no -+fi +- # FIXME: Unfortunately, there are problems with the above when trying +- # to make a dll which has undefined symbols, in which case not +- # even a static library is built. For now, we need to specify +- # -no-undefined on the libtool link line when we can be certain +- # that all symbols are satisfied, otherwise we get a static library. +- allow_undefined=yes +- ;; +- *) +- allow_undefined=yes +- ;; +- esac +- libtool_args="$nonopt" +- base_compile="$nonopt $@" +- compile_command="$nonopt" +- finalize_command="$nonopt" ++# func_execute_cmds commands fail_cmd ++# Execute tilde-delimited COMMANDS. ++# If FAIL_CMD is given, eval that upon failure. ++# FAIL_CMD may read-access the current command in variable CMD! ++func_execute_cmds () ++{ ++ $opt_debug ++ save_ifs=$IFS; IFS='~' ++ for cmd in $1; do ++ IFS=$save_ifs ++ eval cmd=\"$cmd\" ++ func_show_eval "$cmd" "${2-:}" ++ done ++ IFS=$save_ifs ++} --# Whether or not to build static libraries. --build_old_libs=$enable_static -+ac_prog=ld -+if test "$GCC" = yes; then -+ # Check if gcc -print-prog-name=ld gives a path. -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -+$as_echo_n "checking for ld used by $CC... " >&6; } -+ case $host in -+ *-*-mingw*) -+ # gcc leaves a trailing carriage return which upsets mingw -+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; -+ *) -+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; -+ esac -+ case $ac_prog in -+ # Accept absolute paths. -+ [\\/]* | ?:[\\/]*) -+ re_direlt='/[^/][^/]*/\.\./' -+ # Canonicalize the pathname of ld -+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` -+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do -+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` +- compile_rpath= +- finalize_rpath= +- compile_shlibpath= +- finalize_shlibpath= +- convenience= +- old_convenience= +- deplibs= +- old_deplibs= +- compiler_flags= +- linker_flags= +- dllsearchpath= +- lib_search_path=`pwd` +- inst_prefix_dir= + +- avoid_version=no +- dlfiles= +- dlprefiles= +- dlself=no +- export_dynamic=no +- export_symbols= +- export_symbols_regex= +- generated= +- libobjs= +- ltlibs= +- module=no +- no_install=no +- objs= +- non_pic_objects= +- precious_files_regex= +- prefer_static_libs=no +- preload=no +- prev= +- prevarg= +- release= +- rpath= +- xrpath= +- perm_rpath= +- temp_rpath= +- thread_safe=no +- vinfo= +- vinfo_number=no ++# func_source file ++# Source FILE, adding directory component if necessary. ++# Note that it is not necessary on cygwin/mingw to append a dot to ++# FILE even if both FILE and FILE.exe exist: automatic-append-.exe ++# behavior happens only for exec(3), not for open(2)! Also, sourcing ++# `FILE.' does not work on cygwin managed mounts. ++func_source () ++{ ++ $opt_debug ++ case $1 in ++ */* | *\\*) . "$1" ;; ++ *) . "./$1" ;; ++ esac ++} + +- func_infer_tag $base_compile + +- # We need to know -static, to get the right output filenames. +- for arg +- do +- case $arg in +- -all-static | -static) +- if test "X$arg" = "X-all-static"; then +- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then +- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 +- fi +- if test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- else +- if test -z "$pic_flag" && test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static ++# func_infer_tag arg ++# Infer tagged configuration to use if any are available and ++# if one wasn't chosen via the "--tag" command line option. ++# Only attempt this if the compiler in the base compile ++# command doesn't match the default compiler. ++# arg is usually of the form 'gcc ...' ++func_infer_tag () ++{ ++ $opt_debug ++ if test -n "$available_tags" && test -z "$tagname"; then ++ CC_quoted= ++ for arg in $CC; do ++ func_quote_for_eval "$arg" ++ CC_quoted="$CC_quoted $func_quote_for_eval_result" + done -+ test -z "$LD" && LD="$ac_prog" -+ ;; -+ "") -+ # If it fails, then pretend we aren't using GCC. -+ ac_prog=ld -+ ;; -+ *) -+ # If it is relative, then search for the first ld in PATH. -+ with_gnu_ld=unknown -+ ;; -+ esac -+elif test "$with_gnu_ld" = yes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -+$as_echo_n "checking for GNU ld... " >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -+$as_echo_n "checking for non-GNU ld... " >&6; } -+fi -+if test "${lt_cv_path_LD+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test -z "$LD"; then -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+ for ac_dir in $PATH; do -+ IFS="$lt_save_ifs" -+ test -z "$ac_dir" && ac_dir=. -+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then -+ lt_cv_path_LD="$ac_dir/$ac_prog" -+ # Check to see if the program is GNU ld. I'd rather use --version, -+ # but apparently some variants of GNU ld only accept -v. -+ # Break only if it was the GNU/non-GNU ld that we prefer. -+ case `"$lt_cv_path_LD" -v 2>&1 /dev/null; then ++ # Evaluate the configuration. ++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" ++ CC_quoted= ++ for arg in $CC; do ++ # Double-quote args containing other shell metacharacters. ++ func_quote_for_eval "$arg" ++ CC_quoted="$CC_quoted $func_quote_for_eval_result" ++ done ++ case "$@ " in ++ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ++ # The compiler in the base compile command matches ++ # the one in the tagged configuration. ++ # Assume this is the tagged configuration we want. ++ tagname=$z ++ break ++ ;; ++ esac + fi ++ done ++ # If $tagname still isn't set, then no tagged configuration ++ # was found and let the user know that the "--tag" command ++ # line option must be used. ++ if test -z "$tagname"; then ++ func_echo "unable to infer tagged configuration" ++ func_fatal_error "specify a tag with \`--tag'" ++# else ++# func_verbose "using $tagname tagged configuration" + fi +- build_libtool_libs=no +- build_old_libs=yes +- prefer_static_libs=yes +- break + ;; + esac +- done + fi -+ done -+ IFS="$lt_save_ifs" -+else -+ lt_cv_path_LD="$LD" # Let the user override the test with a path. -+fi -+fi - --# Whether or not to add -lc for building shared libraries. --build_libtool_need_lc=$archive_cmds_need_lc_F77 -+LD="$lt_cv_path_LD" -+if test -n "$LD"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 -+$as_echo "$LD" >&6; } -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } -+fi -+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -+if test "${lt_cv_prog_gnu_ld+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ # I'd rather use --version here, but apparently some GNU lds only accept -v. -+case `$LD -v 2>&1 &5 -+$as_echo "$lt_cv_prog_gnu_ld" >&6; } -+with_gnu_ld=$lt_cv_prog_gnu_ld - --# Whether or not to disallow shared libs when runtime libs are static --allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 - --# Whether or not to optimize for fast installation. --fast_install=$enable_fast_install - --# The host system. --host_alias=$host_alias --host=$host - --# An echo program that does not interpret backslashes. --echo=$lt_echo - --# The archiver. --AR=$lt_AR --AR_FLAGS=$lt_AR_FLAGS - --# A C compiler. --LTCC=$lt_LTCC - --# A language-specific compiler. --CC=$lt_compiler_F77 -+ # Check if GNU C++ uses GNU ld as the underlying linker, since the -+ # archiving commands below assume that GNU ld is being used. -+ if test "$with_gnu_ld" = yes; then -+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ -+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' -+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -+ -+ # If archive_cmds runs LD, not CC, wlarc should be empty -+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to -+ # investigate it a little bit more. (MM) -+ wlarc='${wl}' -+ -+ # ancient GNU ld didn't support --whole-archive et. al. -+ if eval "`$CC -print-prog-name=ld` --help 2>&1" | -+ $GREP 'no-whole-archive' > /dev/null; then -+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -+ else -+ whole_archive_flag_spec_CXX= -+ fi -+ else -+ with_gnu_ld=no -+ wlarc= ++} --# Is the compiler the GNU C compiler? --with_gcc=$GCC_F77 -+ # A generic and very simple default shared library creation -+ # command for GNU C++ for the case where it uses the native -+ # linker, instead of GNU ld. If possible, this setting should -+ # overridden to take advantage of the native linker features on -+ # the platform it is being used on. -+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' -+ fi +- # See if our shared archives depend on static archives. +- test -n "$old_archive_from_new_cmds" && build_old_libs=yes --# An ERE matcher. --EGREP=$lt_EGREP -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' +- # Go through the arguments, transforming them on the way. +- while test "$#" -gt 0; do +- arg="$1" +- shift +- case $arg in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test +- ;; +- *) qarg=$arg ;; +- esac +- libtool_args="$libtool_args $qarg" --# The linker used to build libraries. --LD=$lt_LD_F77 +- # If the previous option needs an argument, assign it. +- if test -n "$prev"; then +- case $prev in +- output) +- compile_command="$compile_command @OUTPUT@" +- finalize_command="$finalize_command @OUTPUT@" +- ;; +- esac ++# func_write_libtool_object output_name pic_name nonpic_name ++# Create a libtool object file (analogous to a ".la" file), ++# but don't create it if we're doing a dry run. ++func_write_libtool_object () ++{ ++ write_libobj=${1} ++ if test "$build_libtool_libs" = yes; then ++ write_lobj=\'${2}\' + else -+ GXX=no -+ with_gnu_ld=no -+ wlarc= ++ write_lobj=none + fi --# Whether we need hard or soft links. --LN_S=$lt_LN_S -+ # PORTME: fill in a description of your system's C++ link characteristics -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } -+ ld_shlibs_CXX=yes -+ case $host_os in -+ aix3*) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ aix[4-9]*) -+ if test "$host_cpu" = ia64; then -+ # On IA64, the linker does run time linking by default, so we don't -+ # have to do anything special. -+ aix_use_runtimelinking=no -+ exp_sym_flag='-Bexport' -+ no_entry_flag="" -+ else -+ aix_use_runtimelinking=no - --# A BSD-compatible nm program. --NM=$lt_NM -+ # Test if we are trying to use run time linking or normal -+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we -+ # need to do runtime linking. -+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) -+ for ld_flag in $LDFLAGS; do -+ case $ld_flag in -+ *-brtl*) -+ aix_use_runtimelinking=yes -+ break -+ ;; -+ esac -+ done -+ ;; -+ esac - --# A symbol stripping program --STRIP=$lt_STRIP -+ exp_sym_flag='-bexport' -+ no_entry_flag='-bnoentry' -+ fi +- case $prev in +- dlfiles|dlprefiles) +- if test "$preload" = no; then +- # Add the symbol object into the linking commands. +- compile_command="$compile_command @SYMFILE@" +- finalize_command="$finalize_command @SYMFILE@" +- preload=yes +- fi +- case $arg in +- *.la | *.lo) ;; # We handle these cases below. +- force) +- if test "$dlself" = no; then +- dlself=needless +- export_dynamic=yes +- fi +- prev= +- continue +- ;; +- self) +- if test "$prev" = dlprefiles; then +- dlself=yes +- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then +- dlself=yes +- else +- dlself=needless +- export_dynamic=yes +- fi +- prev= +- continue +- ;; +- *) +- if test "$prev" = dlfiles; then +- dlfiles="$dlfiles $arg" +- else +- dlprefiles="$dlprefiles $arg" +- fi +- prev= +- continue +- ;; +- esac +- ;; +- expsyms) +- export_symbols="$arg" +- if test ! -f "$arg"; then +- $echo "$modename: symbol file \`$arg' does not exist" +- exit $EXIT_FAILURE +- fi +- prev= +- continue +- ;; +- expsyms_regex) +- export_symbols_regex="$arg" +- prev= +- continue +- ;; +- inst_prefix) +- inst_prefix_dir="$arg" +- prev= +- continue +- ;; +- precious_regex) +- precious_files_regex="$arg" +- prev= +- continue +- ;; +- release) +- release="-$arg" +- prev= +- continue +- ;; +- objectlist) +- if test -f "$arg"; then +- save_arg=$arg +- moreargs= +- for fil in `cat $save_arg` +- do +-# moreargs="$moreargs $fil" +- arg=$fil +- # A libtool-controlled object. +- +- # Check to see that this really is a libtool object. +- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- pic_object= +- non_pic_object= +- +- # Read the .lo file +- # If there is no directory component, then add one. +- case $arg in +- */* | *\\*) . $arg ;; +- *) . ./$arg ;; +- esac +- +- if test -z "$pic_object" || \ +- test -z "$non_pic_object" || +- test "$pic_object" = none && \ +- test "$non_pic_object" = none; then +- $echo "$modename: cannot find name of object for \`$arg'" 1>&2 +- exit $EXIT_FAILURE +- fi +- +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++ if test "$build_old_libs" = yes; then ++ write_oldobj=\'${3}\' ++ else ++ write_oldobj=none ++ fi --# Used to examine libraries when file_magic_cmd begins "file" --MAGIC_CMD=$MAGIC_CMD -+ # When large executables or shared objects are built, AIX ld can -+ # have problems creating the table of contents. If linking a library -+ # or program results in "error TOC overflow" add -mminimal-toc to -+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not -+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -+ -+ archive_cmds_CXX='' -+ hardcode_direct_CXX=yes -+ hardcode_direct_absolute_CXX=yes -+ hardcode_libdir_separator_CXX=':' -+ link_all_deplibs_CXX=yes -+ file_list_spec_CXX='${wl}-f,' -+ -+ if test "$GXX" = yes; then -+ case $host_os in aix4.[012]|aix4.[012].*) -+ # We only want to do this on AIX 4.2 and lower, the check -+ # below for broken collect2 doesn't work under 4.3+ -+ collect2name=`${CC} -print-prog-name=collect2` -+ if test -f "$collect2name" && -+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null -+ then -+ # We have reworked collect2 -+ : -+ else -+ # We have old collect2 -+ hardcode_direct_CXX=unsupported -+ # It fails to find uninstalled libraries when the uninstalled -+ # path is not listed in the libpath. Setting hardcode_minus_L -+ # to unsupported forces relinking -+ hardcode_minus_L_CXX=yes -+ hardcode_libdir_flag_spec_CXX='-L$libdir' -+ hardcode_libdir_separator_CXX= -+ fi -+ esac -+ shared_flag='-shared' -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag="$shared_flag "'${wl}-G' -+ fi -+ else -+ # not using gcc -+ if test "$host_cpu" = ia64; then -+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release -+ # chokes on -Wl,-G. The following line is correct: -+ shared_flag='-G' -+ else -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag='${wl}-G' -+ else -+ shared_flag='${wl}-bM:SRE' -+ fi -+ fi -+ fi +- if test "$pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- pic_object="$xdir$pic_object" ++ $opt_dry_run || { ++ cat >${write_libobj}T <conftest.$ac_ext -+/* end confdefs.h. */ +- if test "$prev" = dlfiles; then +- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $pic_object" +- prev= +- continue +- else +- # If libtool objects are unsupported, then we need to preload. +- prev=dlprefiles +- fi +- fi ++# Name of the PIC object. ++pic_object=$write_lobj --# Used on cygwin: object dumper. --OBJDUMP="$OBJDUMP" -+int -+main () -+{ +- # CHECK ME: I think I busted this. -Ossama +- if test "$prev" = dlprefiles; then +- # Preload the old-style object. +- dlprefiles="$dlprefiles $pic_object" +- prev= +- fi ++# Name of the non-PIC object ++non_pic_object=$write_oldobj --# Used on cygwin: assembler. --AS="$AS" -+ ; -+ return 0; +- # A PIC object. +- libobjs="$libobjs $pic_object" +- arg="$pic_object" +- fi ++EOF ++ $MV "${write_libobj}T" "${write_libobj}" ++ } +} -+_ACEOF -+if ac_fn_cxx_try_link "$LINENO"; then : - --# The name of the directory that contains temporary libtool files. --objdir=$objdir -- --# How to create reloadable object files. --reload_flag=$lt_reload_flag --reload_cmds=$lt_reload_cmds -+lt_aix_libpath_sed=' -+ /Import File Strings/,/^$/ { -+ /^0/ { -+ s/^0 *$.*$$/\1/ -+ p -+ } -+ }' -+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+# Check for a 64-bit object if we didn't find anything. -+if test -z "$aix_libpath"; then -+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+fi -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi --# How to pass a linker flag through the compiler. --wl=$lt_lt_prog_compiler_wl_F77 -+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Non-PIC object. +- if test "$non_pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- non_pic_object="$xdir$non_pic_object" ++# func_mode_compile arg... ++func_mode_compile () ++{ ++ $opt_debug ++ # Get the compilation command and the source file. ++ base_compile= ++ srcfile="$nonopt" # always keep a non-empty value in "srcfile" ++ suppress_opt=yes ++ suppress_output= ++ arg_mode=normal ++ libobj= ++ later= ++ pie_flag= --# Object file suffix (normally "o"). --objext="$ac_objext" -+ archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" -+ else -+ if test "$host_cpu" = ia64; then -+ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' -+ allow_undefined_flag_CXX="-z nodefs" -+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" -+ else -+ # Determine the default libpath from the value encoded in an -+ # empty executable. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ +- # A standard non-PIC object +- non_pic_objects="$non_pic_objects $non_pic_object" +- if test -z "$pic_object" || test "$pic_object" = none ; then +- arg="$non_pic_object" +- fi +- fi +- else +- # Only an error if not doing a dry-run. +- if test -z "$run"; then +- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 +- exit $EXIT_FAILURE +- else +- # Dry-run case. ++ for arg ++ do ++ case $arg_mode in ++ arg ) ++ # do not "continue". Instead, add this to base_compile ++ lastarg="$arg" ++ arg_mode=normal ++ ;; --# Old archive suffix (normally "a"). --libext="$libext" -+int -+main () -+{ +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++ target ) ++ libobj="$arg" ++ arg_mode=normal ++ continue ++ ;; --# Shared library suffix (normally ".so"). --shrext_cmds='$shrext_cmds' -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_cxx_try_link "$LINENO"; then : +- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` +- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` +- libobjs="$libobjs $pic_object" +- non_pic_objects="$non_pic_objects $non_pic_object" +- fi +- fi +- done +- else +- $echo "$modename: link input file \`$save_arg' does not exist" +- exit $EXIT_FAILURE +- fi +- arg=$save_arg +- prev= +- continue +- ;; +- rpath | xrpath) +- # We need an absolute path. +- case $arg in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- if test "$prev" = rpath; then +- case "$rpath " in +- *" $arg "*) ;; +- *) rpath="$rpath $arg" ;; +- esac +- else +- case "$xrpath " in +- *" $arg "*) ;; +- *) xrpath="$xrpath $arg" ;; +- esac +- fi +- prev= ++ normal ) ++ # Accept any command-line options. ++ case $arg in ++ -o) ++ test -n "$libobj" && \ ++ func_fatal_error "you cannot specify \`-o' more than once" ++ arg_mode=target + continue + ;; +- xcompiler) +- compiler_flags="$compiler_flags $qarg" +- prev= +- compile_command="$compile_command $qarg" +- finalize_command="$finalize_command $qarg" ++ ++ -pie | -fpie | -fPIE) ++ pie_flag="$pie_flag $arg" + continue + ;; +- xlinker) +- linker_flags="$linker_flags $qarg" +- compiler_flags="$compiler_flags $wl$qarg" +- prev= +- compile_command="$compile_command $wl$qarg" +- finalize_command="$finalize_command $wl$qarg" ++ ++ -shared | -static | -prefer-pic | -prefer-non-pic) ++ later="$later $arg" + continue + ;; +- xcclinker) +- linker_flags="$linker_flags $qarg" +- compiler_flags="$compiler_flags $qarg" +- prev= +- compile_command="$compile_command $qarg" +- finalize_command="$finalize_command $qarg" ++ ++ -no-suppress) ++ suppress_opt=no + continue + ;; +- shrext) +- shrext_cmds="$arg" +- prev= ++ ++ -Xcompiler) ++ arg_mode=arg # the next one goes into the "base_compile" arg list ++ continue # The current "srcfile" will either be retained or ++ ;; # replaced later. I would guess that would be a bug. ++ ++ -Wc,*) ++ func_stripname '-Wc,' '' "$arg" ++ args=$func_stripname_result ++ lastarg= ++ save_ifs="$IFS"; IFS=',' ++ for arg in $args; do ++ IFS="$save_ifs" ++ func_quote_for_eval "$arg" ++ lastarg="$lastarg $func_quote_for_eval_result" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$lastarg" ++ lastarg=$func_stripname_result ++ ++ # Add the arguments to base_compile. ++ base_compile="$base_compile $lastarg" + continue + ;; ++ + *) +- eval "$prev=\"\$arg\"" +- prev= +- continue ++ # Accept the current argument as the source file. ++ # The previous "srcfile" becomes the current argument. ++ # ++ lastarg="$srcfile" ++ srcfile="$arg" + ;; +- esac +- fi # test -n "$prev" +- +- prevarg="$arg" +- +- case $arg in +- -all-static) +- if test -n "$link_static_flag"; then +- compile_command="$compile_command $link_static_flag" +- finalize_command="$finalize_command $link_static_flag" +- fi +- continue +- ;; +- +- -allow-undefined) +- # FIXME: remove this flag sometime in the future. +- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 +- continue ++ esac # case $arg + ;; ++ esac # case $arg_mode --# Executable file suffix (normally ""). --exeext="$exeext" -+lt_aix_libpath_sed=' -+ /Import File Strings/,/^$/ { -+ /^0/ { -+ s/^0 *$.*$$/\1/ -+ p -+ } -+ }' -+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+# Check for a 64-bit object if we didn't find anything. -+if test -z "$aix_libpath"; then -+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+fi -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +- -avoid-version) +- avoid_version=yes +- continue +- ;; ++ # Aesthetically quote the previous argument. ++ func_quote_for_eval "$lastarg" ++ base_compile="$base_compile $func_quote_for_eval_result" ++ done # for arg --# Additional compiler flags for building library objects. --pic_flag=$lt_lt_prog_compiler_pic_F77 --pic_mode=$pic_mode -+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" -+ # Warning - without using the other run time loading flags, -+ # -berok will link without error, but may produce a broken library. -+ no_undefined_flag_CXX=' ${wl}-bernotok' -+ allow_undefined_flag_CXX=' ${wl}-berok' -+ # Exported symbols can be pulled into shared objects from archives -+ whole_archive_flag_spec_CXX='$convenience' -+ archive_cmds_need_lc_CXX=yes -+ # This is similar to how AIX traditionally builds its shared -+ # libraries. -+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -+ fi -+ fi -+ ;; +- -dlopen) +- prev=dlfiles +- continue +- ;; ++ case $arg_mode in ++ arg) ++ func_fatal_error "you must specify an argument for -Xcompile" ++ ;; ++ target) ++ func_fatal_error "you must specify a target with \`-o'" ++ ;; ++ *) ++ # Get the name of the library object. ++ test -z "$libobj" && { ++ func_basename "$srcfile" ++ libobj="$func_basename_result" ++ } ++ ;; ++ esac --# What is the maximum length of a command? --max_cmd_len=$lt_cv_sys_max_cmd_len -+ beos*) -+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ allow_undefined_flag_CXX=unsupported -+ # Joseph Beckenbach says some releases of gcc -+ # support --undefined. This deserves some investigation. FIXME -+ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ else -+ ld_shlibs_CXX=no -+ fi -+ ;; +- -dlpreopen) +- prev=dlprefiles +- continue +- ;; ++ # Recognize several different file suffixes. ++ # If the user specifies -o file.o, it is replaced with file.lo ++ case $libobj in ++ *.[cCFSifmso] | \ ++ *.ada | *.adb | *.ads | *.asm | \ ++ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ ++ *.[fF][09]? | *.for | *.java | *.obj | *.sx) ++ func_xform "$libobj" ++ libobj=$func_xform_result ++ ;; ++ esac --# Does compiler simultaneously support -c and -o options? --compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 -+ chorus*) -+ case $cc_basename in -+ *) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ esac -+ ;; +- -export-dynamic) +- export_dynamic=yes +- continue +- ;; ++ case $libobj in ++ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; ++ *) ++ func_fatal_error "cannot determine name of library object from \`$libobj'" ++ ;; ++ esac --# Must we lock files when doing compilation ? --need_locks=$lt_need_locks -+ cygwin* | mingw* | pw32* | cegcc*) -+ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, -+ # as there is no search path for DLLs. -+ hardcode_libdir_flag_spec_CXX='-L$libdir' -+ allow_undefined_flag_CXX=unsupported -+ always_export_symbols_CXX=no -+ enable_shared_with_static_runtimes_CXX=yes -+ -+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then -+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ # If the export-symbols file already is a .def file (1st line -+ # is EXPORTS), use it as is; otherwise, prepend... -+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ cp $export_symbols $output_objdir/$soname.def; -+ else -+ echo EXPORTS > $output_objdir/$soname.def; -+ cat $export_symbols >> $output_objdir/$soname.def; -+ fi~ -+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ else -+ ld_shlibs_CXX=no -+ fi -+ ;; -+ darwin* | rhapsody*) +- -export-symbols | -export-symbols-regex) +- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then +- $echo "$modename: more than one -exported-symbols argument is not allowed" +- exit $EXIT_FAILURE +- fi +- if test "X$arg" = "X-export-symbols"; then +- prev=expsyms +- else +- prev=expsyms_regex +- fi +- continue +- ;; ++ func_infer_tag $base_compile --# Do we need the lib prefix for modules? --need_lib_prefix=$need_lib_prefix +- -inst-prefix-dir) +- prev=inst_prefix ++ for arg in $later; do ++ case $arg in ++ -shared) ++ test "$build_libtool_libs" != yes && \ ++ func_fatal_configuration "can not build a shared library" ++ build_old_libs=no + continue + ;; --# Do we need a version for libraries? --need_version=$need_version -+ archive_cmds_need_lc_CXX=no -+ hardcode_direct_CXX=no -+ hardcode_automatic_CXX=yes -+ hardcode_shlibpath_var_CXX=unsupported -+ whole_archive_flag_spec_CXX='' -+ link_all_deplibs_CXX=yes -+ allow_undefined_flag_CXX="$_lt_dar_allow_undefined" -+ case $cc_basename in -+ ifort*) _lt_dar_can_shared=yes ;; -+ *) _lt_dar_can_shared=$GCC ;; -+ esac -+ if test "$_lt_dar_can_shared" = "yes"; then -+ output_verbose_link_cmd=echo -+ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" -+ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" -+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" -+ module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" -+ if test "$lt_cv_apple_cc_single_mod" != "yes"; then -+ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" -+ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" -+ fi +- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* +- # so, if we see these flags be careful not to treat them like -L +- -L[A-Z][A-Z]*:*) +- case $with_gcc/$host in +- no/*-*-irix* | /*-*-irix*) +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- ;; +- esac ++ -static) ++ build_libtool_libs=no ++ build_old_libs=yes + continue + ;; --# Whether dlopen is supported. --dlopen_support=$enable_dlopen -+ else -+ ld_shlibs_CXX=no -+ fi +- -L*) +- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- absdir=`cd "$dir" && pwd` +- if test -z "$absdir"; then +- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 +- exit $EXIT_FAILURE +- fi +- dir="$absdir" +- ;; +- esac +- case "$deplibs " in +- *" -L$dir "*) ;; +- *) +- deplibs="$deplibs -L$dir" +- lib_search_path="$lib_search_path $dir" +- ;; +- esac +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- case :$dllsearchpath: in +- *":$dir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$dir";; +- esac +- ;; +- esac ++ -prefer-pic) ++ pic_mode=yes + continue + ;; --# Whether dlopen of programs is supported. --dlopen_self=$enable_dlopen_self -+ ;; +- -l*) +- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then +- case $host in +- *-*-cygwin* | *-*-pw32* | *-*-beos*) +- # These systems don't actually have a C or math library (as such) +- continue +- ;; +- *-*-mingw* | *-*-os2*) +- # These systems don't actually have a C library (as such) +- test "X$arg" = "X-lc" && continue +- ;; +- *-*-openbsd* | *-*-freebsd*) +- # Do not include libc due to us having libc/libc_r. +- test "X$arg" = "X-lc" && continue +- ;; +- *-*-rhapsody* | *-*-darwin1.[012]) +- # Rhapsody C and math libraries are in the System framework +- deplibs="$deplibs -framework System" +- continue +- esac +- elif test "X$arg" = "X-lc_r"; then +- case $host in +- *-*-openbsd* | *-*-freebsd*) +- # Do not include libc_r directly, use -pthread flag. +- continue +- ;; +- esac +- fi +- deplibs="$deplibs $arg" ++ -prefer-non-pic) ++ pic_mode=no + continue + ;; ++ esac ++ done --# Whether dlopen of statically linked programs is supported. --dlopen_self_static=$enable_dlopen_self_static -+ dgux*) -+ case $cc_basename in -+ ec++*) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ ghcx*) -+ # Green Hills C++ Compiler -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ *) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ esac -+ ;; +- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) +- deplibs="$deplibs $arg" +- continue +- ;; ++ func_quote_for_eval "$libobj" ++ test "X$libobj" != "X$func_quote_for_eval_result" \ ++ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ ++ && func_warning "libobj name \`$libobj' may not contain shell special characters." ++ func_dirname_and_basename "$obj" "/" "" ++ objname="$func_basename_result" ++ xdir="$func_dirname_result" ++ lobj=${xdir}$objdir/$objname --# Compiler flag to prevent dynamic linking. --link_static_flag=$lt_lt_prog_compiler_static_F77 -+ freebsd[12]*) -+ # C++ shared libraries reported to be fairly broken before -+ # switch to ELF -+ ld_shlibs_CXX=no -+ ;; +- -module) +- module=yes +- continue +- ;; ++ test -z "$base_compile" && \ ++ func_fatal_help "you must specify a compilation command" --# Compiler flag to turn off builtin functions. --no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 -+ freebsd-elf*) -+ archive_cmds_need_lc_CXX=no -+ ;; +- # gcc -m* arguments should be passed to the linker via $compiler_flags +- # in order to pass architecture information to the linker +- # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo +- # but this is not reliable with gcc because gcc may use -mfoo to +- # select a different linker, different libraries, etc, while +- # -Wl,-mfoo simply passes -mfoo to the linker. +- -m*) +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- if test "$with_gcc" = "yes" ; then +- compiler_flags="$compiler_flags $arg" +- fi +- continue +- ;; ++ # Delete any leftover library objects. ++ if test "$build_old_libs" = yes; then ++ removelist="$obj $lobj $libobj ${libobj}T" ++ else ++ removelist="$lobj $libobj ${libobj}T" ++ fi --# Compiler flag to allow reflexive dlopens. --export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 -+ freebsd* | dragonfly*) -+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF -+ # conventions -+ ld_shlibs_CXX=yes -+ ;; +- -shrext) +- prev=shrext +- continue +- ;; ++ # On Cygwin there's no "real" PIC flag so we must build both object types ++ case $host_os in ++ cygwin* | mingw* | pw32* | os2* | cegcc*) ++ pic_mode=default ++ ;; ++ esac ++ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then ++ # non-PIC code in shared libraries is not supported ++ pic_mode=default ++ fi --# Compiler flag to generate shared objects directly from archives. --whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 -+ gnu*) -+ ;; +- -no-fast-install) +- fast_install=no +- continue +- ;; ++ # Calculate the filename of the output object if compiler does ++ # not support -o with -c ++ if test "$compiler_c_o" = no; then ++ output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} ++ lockfile="$output_obj.lock" ++ else ++ output_obj= ++ need_locks=no ++ lockfile= ++ fi --# Compiler flag to generate thread-safe objects. --thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 -+ hpux9*) -+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' -+ hardcode_libdir_separator_CXX=: -+ export_dynamic_flag_spec_CXX='${wl}-E' -+ hardcode_direct_CXX=yes -+ hardcode_minus_L_CXX=yes # Not in the search PATH, -+ # but as the default -+ # location of the library. -+ -+ case $cc_basename in -+ CC*) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ aCC*) -+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ ;; -+ *) -+ if test "$GXX" = yes; then -+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ else -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ fi -+ ;; -+ esac -+ ;; +- -no-install) +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- # The PATH hackery in wrapper scripts is required on Windows +- # in order for the loader to find any dlls it needs. +- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 +- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 +- fast_install=no +- ;; +- *) no_install=yes ;; +- esac +- continue +- ;; ++ # Lock this critical section if it is needed ++ # We use this script file to make the link, it avoids creating a new file ++ if test "$need_locks" = yes; then ++ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do ++ func_echo "Waiting for $lockfile to be removed" ++ sleep 2 ++ done ++ elif test "$need_locks" = warn; then ++ if test -f "$lockfile"; then ++ $ECHO "\ ++*** ERROR, $lockfile exists and contains: ++`cat $lockfile 2>/dev/null` --# Library versioning type. --version_type=$version_type -+ hpux10*|hpux11*) -+ if test $with_gnu_ld = no; then -+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' -+ hardcode_libdir_separator_CXX=: +- -no-undefined) +- allow_undefined=no +- continue +- ;; ++This indicates that another process is trying to use the same ++temporary object file, and libtool could not work around it because ++your compiler does not support \`-c' and \`-o' together. If you ++repeat this compilation, it may succeed, by chance, but you had better ++avoid parallel builds (make -j) in this platform, or get a better ++compiler." --# Format of library name prefix. --libname_spec=$lt_libname_spec -+ case $host_cpu in -+ hppa*64*|ia64*) -+ ;; -+ *) -+ export_dynamic_flag_spec_CXX='${wl}-E' -+ ;; -+ esac -+ fi -+ case $host_cpu in -+ hppa*64*|ia64*) -+ hardcode_direct_CXX=no -+ hardcode_shlibpath_var_CXX=no -+ ;; -+ *) -+ hardcode_direct_CXX=yes -+ hardcode_direct_absolute_CXX=yes -+ hardcode_minus_L_CXX=yes # Not in the search PATH, -+ # but as the default -+ # location of the library. -+ ;; -+ esac +- -objectlist) +- prev=objectlist +- continue +- ;; ++ $opt_dry_run || $RM $removelist ++ exit $EXIT_FAILURE ++ fi ++ removelist="$removelist $output_obj" ++ $ECHO "$srcfile" > "$lockfile" ++ fi --# List of archive names. First name is the real one, the rest are links. --# The last name is the one that the linker finds with -lNAME. --library_names_spec=$lt_library_names_spec -+ case $cc_basename in -+ CC*) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ aCC*) -+ case $host_cpu in -+ hppa*64*) -+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ ia64*) -+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ *) -+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ esac -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ ;; -+ *) -+ if test "$GXX" = yes; then -+ if test $with_gnu_ld = no; then -+ case $host_cpu in -+ hppa*64*) -+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ ia64*) -+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ *) -+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ esac -+ fi -+ else -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ fi -+ ;; -+ esac -+ ;; +- -o) prev=output ;; ++ $opt_dry_run || $RM $removelist ++ removelist="$removelist $lockfile" ++ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 --# The coded name of the library, if different from the real name. --soname_spec=$lt_soname_spec -+ interix[3-9]*) -+ hardcode_direct_CXX=no -+ hardcode_shlibpath_var_CXX=no -+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' -+ export_dynamic_flag_spec_CXX='${wl}-E' -+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. -+ # Instead, shared libraries are loaded at an image base (0x10000000 by -+ # default) and relocated if they conflict, which is a slow very memory -+ # consuming and fragmenting process. To avoid this, we pick a random, -+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link -+ # time. Moving up from 0x10000000 also allows more sbrk(2) space. -+ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' -+ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' -+ ;; -+ irix5* | irix6*) -+ case $cc_basename in -+ CC*) -+ # SGI C++ -+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ -+ # Archives containing C++ object files must be created using -+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is -+ # necessary to make sure instantiated templates are included -+ # in the archive. -+ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' -+ ;; -+ *) -+ if test "$GXX" = yes; then -+ if test "$with_gnu_ld" = no; then -+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ else -+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' -+ fi -+ fi -+ link_all_deplibs_CXX=yes -+ ;; -+ esac -+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' -+ hardcode_libdir_separator_CXX=: -+ inherit_rpath_CXX=yes -+ ;; +- -precious-files-regex) +- prev=precious_regex +- continue +- ;; ++ if test -n "$fix_srcfile_path"; then ++ eval srcfile=\"$fix_srcfile_path\" ++ fi ++ func_quote_for_eval "$srcfile" ++ qsrcfile=$func_quote_for_eval_result --# Commands used to build and install an old-style archive. --RANLIB=$lt_RANLIB --old_archive_cmds=$lt_old_archive_cmds_F77 --old_postinstall_cmds=$lt_old_postinstall_cmds --old_postuninstall_cmds=$lt_old_postuninstall_cmds -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ case $cc_basename in -+ KCC*) -+ # Kuck and Associates, Inc. (KAI) C++ Compiler -+ -+ # KCC will only create a shared library if the output file -+ # ends with ".so" (or ".sl" for HP-UX), so rename the library -+ # to its proper name (with version) after linking. -+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' -+ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ -+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' -+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -+ -+ # Archives containing C++ object files must be created using -+ # "CC -Bstatic", where "CC" is the KAI C++ compiler. -+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' -+ ;; -+ icpc* | ecpc* ) -+ # Intel C++ -+ with_gnu_ld=yes -+ # version 8.0 and above of icpc choke on multiply defined symbols -+ # if we add $predep_objects and $postdep_objects, however 7.1 and -+ # earlier do not add the objects themselves. -+ case `$CC -V 2>&1` in -+ *"Version 7."*) -+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ ;; -+ *) # Version 8.0 or newer -+ tmp_idyn= -+ case $host_cpu in -+ ia64*) tmp_idyn=' -i_dynamic';; -+ esac -+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ ;; -+ esac -+ archive_cmds_need_lc_CXX=no -+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' -+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' -+ ;; -+ pgCC* | pgcpp*) -+ # Portland Group C++ compiler -+ case `$CC -V` in -+ *pgCC\ [1-5]* | *pgcpp\ [1-5]*) -+ prelink_cmds_CXX='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ -+ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' -+ old_archive_cmds_CXX='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ -+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ -+ $RANLIB $oldlib' -+ archive_cmds_CXX='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ -+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' -+ archive_expsym_cmds_CXX='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ -+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' -+ ;; -+ *) # Version 6 will use weak symbols -+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' -+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' -+ ;; -+ esac +- -release) +- prev=release +- continue +- ;; ++ # Only build a PIC object if we are building libtool libraries. ++ if test "$build_libtool_libs" = yes; then ++ # Without this assignment, base_compile gets emptied. ++ fbsd_hideous_sh_bug=$base_compile --# Create an old-style archive from a shared archive. --old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 -+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' -+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ ;; -+ cxx*) -+ # Compaq C++ -+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' +- -rpath) +- prev=rpath +- continue +- ;; ++ if test "$pic_mode" != no; then ++ command="$base_compile $qsrcfile $pic_flag" ++ else ++ # Don't build PIC code ++ command="$base_compile $qsrcfile" ++ fi --# Create a temporary old-style archive to link instead of a shared archive. --old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 -+ runpath_var=LD_RUN_PATH -+ hardcode_libdir_flag_spec_CXX='-rpath $libdir' -+ hardcode_libdir_separator_CXX=: +- -R) +- prev=xrpath +- continue +- ;; ++ func_mkdir_p "$xdir$objdir" --# Commands used to build and install a shared archive. --archive_cmds=$lt_archive_cmds_F77 --archive_expsym_cmds=$lt_archive_expsym_cmds_F77 --postinstall_cmds=$lt_postinstall_cmds --postuninstall_cmds=$lt_postuninstall_cmds -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ ;; -+ xl*) -+ # IBM XL 8.0 on PPC, with GNU ld -+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' -+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' -+ archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ if test "x$supports_anon_versioning" = xyes; then -+ archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ -+ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ -+ echo "local: *; };" >> $output_objdir/$libname.ver~ -+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' -+ fi -+ ;; -+ *) -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C++ 5.9 -+ no_undefined_flag_CXX=' -zdefs' -+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' -+ hardcode_libdir_flag_spec_CXX='-R$libdir' -+ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ compiler_needs_object_CXX=yes -+ -+ # Not sure whether something based on -+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 -+ # would be better. -+ output_verbose_link_cmd='echo' -+ -+ # Archives containing C++ object files must be created using -+ # "CC -xar", where "CC" is the Sun C++ compiler. This is -+ # necessary to make sure instantiated templates are included -+ # in the archive. -+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' -+ ;; -+ esac -+ ;; -+ esac -+ ;; +- -R*) +- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- case "$xrpath " in +- *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; +- esac +- continue +- ;; ++ if test -z "$output_obj"; then ++ # Place PIC objects in $objdir ++ command="$command -o $lobj" ++ fi --# Commands used to build a loadable module (assumed same as above if empty) --module_cmds=$lt_module_cmds_F77 --module_expsym_cmds=$lt_module_expsym_cmds_F77 -+ lynxos*) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; +- -static) +- # The effects of -static are defined in a previous loop. +- # We used to do the same as -all-static on platforms that +- # didn't have a PIC flag, but the assumption that the effects +- # would be equivalent was wrong. It would break on at least +- # Digital Unix and AIX. +- continue +- ;; ++ func_show_eval_locale "$command" \ ++ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' --# Commands to strip libraries. --old_striplib=$lt_old_striplib --striplib=$lt_striplib -+ m88k*) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; +- -thread-safe) +- thread_safe=yes +- continue +- ;; ++ if test "$need_locks" = warn && ++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then ++ $ECHO "\ ++*** ERROR, $lockfile contains: ++`cat $lockfile 2>/dev/null` --# Dependencies to place before the objects being linked to create a --# shared library. --predep_objects=$lt_predep_objects_F77 -- --# Dependencies to place after the objects being linked to create a --# shared library. --postdep_objects=$lt_postdep_objects_F77 -- --# Dependencies to place before the objects being linked to create a --# shared library. --predeps=$lt_predeps_F77 -- --# Dependencies to place after the objects being linked to create a --# shared library. --postdeps=$lt_postdeps_F77 -+ mvs*) -+ case $cc_basename in -+ cxx*) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ *) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ esac -+ ;; +- -version-info) +- prev=vinfo +- continue +- ;; +- -version-number) +- prev=vinfo +- vinfo_number=yes +- continue +- ;; ++but it should contain: ++$srcfile + +- -Wc,*) +- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` +- arg= +- save_ifs="$IFS"; IFS=',' +- for flag in $args; do +- IFS="$save_ifs" +- case $flag in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- flag="\"$flag\"" +- ;; +- esac +- arg="$arg $wl$flag" +- compiler_flags="$compiler_flags $flag" +- done +- IFS="$save_ifs" +- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` +- ;; ++This indicates that another process is trying to use the same ++temporary object file, and libtool could not work around it because ++your compiler does not support \`-c' and \`-o' together. If you ++repeat this compilation, it may succeed, by chance, but you had better ++avoid parallel builds (make -j) in this platform, or get a better ++compiler." --# The library search path used internally by the compiler when linking --# a shared library. --compiler_lib_search_path=$lt_compiler_lib_search_path_F77 -+ netbsd*) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' -+ wlarc= -+ hardcode_libdir_flag_spec_CXX='-R$libdir' -+ hardcode_direct_CXX=yes -+ hardcode_shlibpath_var_CXX=no -+ fi -+ # Workaround some broken pre-1.5 toolchains -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' -+ ;; +- -Wl,*) +- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` +- arg= +- save_ifs="$IFS"; IFS=',' +- for flag in $args; do +- IFS="$save_ifs" +- case $flag in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- flag="\"$flag\"" +- ;; +- esac +- arg="$arg $wl$flag" +- compiler_flags="$compiler_flags $wl$flag" +- linker_flags="$linker_flags $flag" +- done +- IFS="$save_ifs" +- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` +- ;; ++ $opt_dry_run || $RM $removelist ++ exit $EXIT_FAILURE ++ fi --# Method to check whether dependent libraries are shared objects. --deplibs_check_method=$lt_deplibs_check_method -+ *nto* | *qnx*) -+ ld_shlibs_CXX=yes -+ ;; +- -Xcompiler) +- prev=xcompiler +- continue +- ;; ++ # Just move the object if needed, then go on to compile the next one ++ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then ++ func_show_eval '$MV "$output_obj" "$lobj"' \ ++ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' ++ fi --# Command to use when deplibs_check_method == file_magic. --file_magic_cmd=$lt_file_magic_cmd -+ openbsd2*) -+ # C++ shared libraries are fairly broken -+ ld_shlibs_CXX=no -+ ;; +- -Xlinker) +- prev=xlinker +- continue +- ;; ++ # Allow error messages only from the first compilation. ++ if test "$suppress_opt" = yes; then ++ suppress_output=' >/dev/null 2>&1' ++ fi ++ fi --# Flag that allows shared libraries with undefined symbols to be built. --allow_undefined_flag=$lt_allow_undefined_flag_F77 -+ openbsd*) -+ if test -f /usr/libexec/ld.so; then -+ hardcode_direct_CXX=yes -+ hardcode_shlibpath_var_CXX=no -+ hardcode_direct_absolute_CXX=yes -+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' -+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' -+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' -+ export_dynamic_flag_spec_CXX='${wl}-E' -+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -+ fi -+ output_verbose_link_cmd=echo -+ else -+ ld_shlibs_CXX=no -+ fi -+ ;; +- -XCClinker) +- prev=xcclinker +- continue +- ;; ++ # Only build a position-dependent object if we build old libraries. ++ if test "$build_old_libs" = yes; then ++ if test "$pic_mode" != yes; then ++ # Don't build PIC code ++ command="$base_compile $qsrcfile$pie_flag" ++ else ++ command="$base_compile $qsrcfile $pic_flag" ++ fi ++ if test "$compiler_c_o" = yes; then ++ command="$command -o $obj" ++ fi --# Flag that forces no undefined symbols. --no_undefined_flag=$lt_no_undefined_flag_F77 -+ osf3* | osf4* | osf5*) -+ case $cc_basename in -+ KCC*) -+ # Kuck and Associates, Inc. (KAI) C++ Compiler -+ -+ # KCC will only create a shared library if the output file -+ # ends with ".so" (or ".sl" for HP-UX), so rename the library -+ # to its proper name (with version) after linking. -+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' -+ -+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' -+ hardcode_libdir_separator_CXX=: -+ -+ # Archives containing C++ object files must be created using -+ # the KAI C++ compiler. -+ case $host in -+ osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; -+ *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; -+ esac -+ ;; -+ RCC*) -+ # Rational C++ 2.4.1 -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ cxx*) -+ case $host in -+ osf3*) -+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' -+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' -+ ;; -+ *) -+ allow_undefined_flag_CXX=' -expect_unresolved \*' -+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ -+ echo "-hidden">> $lib.exp~ -+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ -+ $RM $lib.exp' -+ hardcode_libdir_flag_spec_CXX='-rpath $libdir' -+ ;; -+ esac +- # Some other compiler flag. +- -* | +*) +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- ;; ++ # Suppress compiler output if we already did a PIC compilation. ++ command="$command$suppress_output" ++ func_show_eval_locale "$command" \ ++ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' --# Commands used to finish a libtool library installation in a directory. --finish_cmds=$lt_finish_cmds -+ hardcode_libdir_separator_CXX=: +- *.$objext) +- # A standard object. +- objs="$objs $arg" +- ;; ++ if test "$need_locks" = warn && ++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then ++ $ECHO "\ ++*** ERROR, $lockfile contains: ++`cat $lockfile 2>/dev/null` --# Same as above, but a single script fragment to be evaled but not shown. --finish_eval=$lt_finish_eval -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ ;; -+ *) -+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then -+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' -+ case $host in -+ osf3*) -+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ ;; -+ *) -+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ ;; -+ esac -+ -+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' -+ hardcode_libdir_separator_CXX=: -+ -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ -+ else -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ fi -+ ;; -+ esac -+ ;; +- *.lo) +- # A libtool-controlled object. ++but it should contain: ++$srcfile --# Take the output of nm and produce a listing of raw symbols and C names. --global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -+ psos*) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; +- # Check to see that this really is a libtool object. +- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- pic_object= +- non_pic_object= ++This indicates that another process is trying to use the same ++temporary object file, and libtool could not work around it because ++your compiler does not support \`-c' and \`-o' together. If you ++repeat this compilation, it may succeed, by chance, but you had better ++avoid parallel builds (make -j) in this platform, or get a better ++compiler." --# Transform the output of nm in a proper C declaration --global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -+ sunos4*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.x -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ lcc*) -+ # Lucid -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ *) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ esac -+ ;; +- # Read the .lo file +- # If there is no directory component, then add one. +- case $arg in +- */* | *\\*) . $arg ;; +- *) . ./$arg ;; +- esac ++ $opt_dry_run || $RM $removelist ++ exit $EXIT_FAILURE ++ fi --# Transform the output of nm in a C name address pair --global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -+ solaris*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.2, 5.x and Centerline C++ -+ archive_cmds_need_lc_CXX=yes -+ no_undefined_flag_CXX=' -zdefs' -+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' -+ -+ hardcode_libdir_flag_spec_CXX='-R$libdir' -+ hardcode_shlibpath_var_CXX=no -+ case $host_os in -+ solaris2.[0-5] | solaris2.[0-5].*) ;; -+ *) -+ # The compiler driver will combine and reorder linker options, -+ # but understands `-z linker_flag'. -+ # Supported since Solaris 2.6 (maybe 2.5.1?) -+ whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' -+ ;; -+ esac -+ link_all_deplibs_CXX=yes +- if test -z "$pic_object" || \ +- test -z "$non_pic_object" || +- test "$pic_object" = none && \ +- test "$non_pic_object" = none; then +- $echo "$modename: cannot find name of object for \`$arg'" 1>&2 +- exit $EXIT_FAILURE +- fi ++ # Just move the object if needed ++ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then ++ func_show_eval '$MV "$output_obj" "$obj"' \ ++ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' ++ fi ++ fi --# This is the shared library runtime path variable. --runpath_var=$runpath_var -+ output_verbose_link_cmd='echo' +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++ $opt_dry_run || { ++ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" --# This is the shared library path variable. --shlibpath_var=$shlibpath_var -+ # Archives containing C++ object files must be created using -+ # "CC -xar", where "CC" is the Sun C++ compiler. This is -+ # necessary to make sure instantiated templates are included -+ # in the archive. -+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' -+ ;; -+ gcx*) -+ # Green Hills C++ Compiler -+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- if test "$pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- pic_object="$xdir$pic_object" ++ # Unlock the critical section if it was locked ++ if test "$need_locks" != no; then ++ removelist=$lockfile ++ $RM "$lockfile" ++ fi ++ } --# Is shlibpath searched before the hard-coded library search path? --shlibpath_overrides_runpath=$shlibpath_overrides_runpath -+ # The C++ compiler must be used to create the archive. -+ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' -+ ;; -+ *) -+ # GNU C++ compiler with Solaris linker -+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then -+ no_undefined_flag_CXX=' ${wl}-z ${wl}defs' -+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then -+ archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' -+ -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ else -+ # g++ 2.7 appears to require `-G' NOT `-shared' on this -+ # platform. -+ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' -+ -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ fi -+ -+ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' -+ case $host_os in -+ solaris2.[0-5] | solaris2.[0-5].*) ;; -+ *) -+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' -+ ;; -+ esac -+ fi -+ ;; -+ esac -+ ;; +- if test "$prev" = dlfiles; then +- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $pic_object" +- prev= +- continue +- else +- # If libtool objects are unsupported, then we need to preload. +- prev=dlprefiles +- fi +- fi ++ exit $EXIT_SUCCESS ++} --# How to hardcode a shared library path into an executable. --hardcode_action=$hardcode_action_F77 -+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) -+ no_undefined_flag_CXX='${wl}-z,text' -+ archive_cmds_need_lc_CXX=no -+ hardcode_shlibpath_var_CXX=no -+ runpath_var='LD_RUN_PATH' +- # CHECK ME: I think I busted this. -Ossama +- if test "$prev" = dlprefiles; then +- # Preload the old-style object. +- dlprefiles="$dlprefiles $pic_object" +- prev= +- fi ++$opt_help || { ++test "$mode" = compile && func_mode_compile ${1+"$@"} ++} --# Whether we should hardcode library paths into libraries. --hardcode_into_libs=$hardcode_into_libs -+ case $cc_basename in -+ CC*) -+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ *) -+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ esac -+ ;; +- # A PIC object. +- libobjs="$libobjs $pic_object" +- arg="$pic_object" +- fi ++func_mode_help () ++{ ++ # We need to display help for each of the modes. ++ case $mode in ++ "") ++ # Generic help is extracted from the usage comments ++ # at the start of this file. ++ func_help ++ ;; --# Flag to hardcode \$libdir into a binary during linking. --# This must work even if \$libdir does not exist. --hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 -+ sysv5* | sco3.2v5* | sco5v6*) -+ # Note: We can NOT use -z defs as we might desire, because we do not -+ # link with -lc, and that would cause any symbols used from libc to -+ # always be unresolved, which means just about no library would -+ # ever link correctly. If we're not using GNU ld we use -z text -+ # though, which does catch some bad symbols but isn't as heavy-handed -+ # as -z defs. -+ no_undefined_flag_CXX='${wl}-z,text' -+ allow_undefined_flag_CXX='${wl}-z,nodefs' -+ archive_cmds_need_lc_CXX=no -+ hardcode_shlibpath_var_CXX=no -+ hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' -+ hardcode_libdir_separator_CXX=':' -+ link_all_deplibs_CXX=yes -+ export_dynamic_flag_spec_CXX='${wl}-Bexport' -+ runpath_var='LD_RUN_PATH' +- # Non-PIC object. +- if test "$non_pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- non_pic_object="$xdir$non_pic_object" ++ clean) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... --# If ld is used when linking, flag to hardcode \$libdir into --# a binary during linking. This must work even if \$libdir does --# not exist. --hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 -- --# Whether we need a single -rpath flag with a separated argument. --hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 -- --# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the --# resulting binary. --hardcode_direct=$hardcode_direct_F77 -- --# Set to yes if using the -LDIR flag during linking hardcodes DIR into the --# resulting binary. --hardcode_minus_L=$hardcode_minus_L_F77 -- --# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into --# the resulting binary. --hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 -- --# Set to yes if building a shared library automatically hardcodes DIR into the library --# and all subsequent libraries and executables linked against it. --hardcode_automatic=$hardcode_automatic_F77 -+ case $cc_basename in -+ CC*) -+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ *) -+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ esac -+ ;; +- # A standard non-PIC object +- non_pic_objects="$non_pic_objects $non_pic_object" +- if test -z "$pic_object" || test "$pic_object" = none ; then +- arg="$non_pic_object" +- fi +- fi +- else +- # Only an error if not doing a dry-run. +- if test -z "$run"; then +- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 +- exit $EXIT_FAILURE +- else +- # Dry-run case. ++Remove files from the build directory. --# Variables whose values should be saved in libtool wrapper scripts and --# restored at relink time. --variables_saved_for_relink="$variables_saved_for_relink" -+ tandem*) -+ case $cc_basename in -+ NCC*) -+ # NonStop-UX NCC 3.20 -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ *) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ esac -+ ;; +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++RM is the name of the program to use to delete files associated with each FILE ++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed ++to RM. --# Whether libtool must link a program against all its dependency libraries. --link_all_deplibs=$link_all_deplibs_F77 -+ vxworks*) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no +- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` +- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` +- libobjs="$libobjs $pic_object" +- non_pic_objects="$non_pic_objects $non_pic_object" +- fi +- fi +- ;; ++If FILE is a libtool library, object or program, all the files associated ++with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; --# Compile-time system search path for libraries --sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -+ *) -+ # FIXME: insert proper C++ library support -+ ld_shlibs_CXX=no -+ ;; -+ esac +- *.$libext) +- # An archive. +- deplibs="$deplibs $arg" +- old_deplibs="$old_deplibs $arg" +- continue +- ;; ++ compile) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE --# Run-time system search path for libraries --sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 -+$as_echo "$ld_shlibs_CXX" >&6; } -+ test "$ld_shlibs_CXX" = no && can_build_shared=no -+ -+ GCC_CXX="$GXX" -+ LD_CXX="$LD" -+ -+ ## CAVEAT EMPTOR: -+ ## There is no encapsulation within the following macros, do not change -+ ## the running order or otherwise move them around unless you know exactly -+ ## what you are doing... -+ # Dependencies to place before and after the object being linked: -+predep_objects_CXX= -+postdep_objects_CXX= -+predeps_CXX= -+postdeps_CXX= -+compiler_lib_search_path_CXX= +- *.la) +- # A libtool-controlled library. ++Compile a source file into a libtool library object. --# Fix the shell variable \$srcfile for the compiler. --fix_srcfile_path="$fix_srcfile_path_F77" -+cat > conftest.$ac_ext <<_LT_EOF -+class Foo -+{ -+public: -+ Foo (void) { a = 0; } -+private: -+ int a; -+}; -+_LT_EOF +- if test "$prev" = dlfiles; then +- # This library was specified with -dlopen. +- dlfiles="$dlfiles $arg" +- prev= +- elif test "$prev" = dlprefiles; then +- # The library was specified with -dlpreopen. +- dlprefiles="$dlprefiles $arg" +- prev= +- else +- deplibs="$deplibs $arg" +- fi +- continue +- ;; ++This mode accepts the following additional options: --# Set to yes if exported symbols are required. --always_export_symbols=$always_export_symbols_F77 -+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 -+ (eval $ac_compile) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; then -+ # Parse the compiler output and extract the necessary -+ # objects, libraries and library flags. +- # Some other compiler argument. +- *) +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- ;; +- esac # arg ++ -o OUTPUT-FILE set the output file name to OUTPUT-FILE ++ -no-suppress do not suppress compiler output for multiple passes ++ -prefer-pic try to building PIC objects only ++ -prefer-non-pic try to building non-PIC objects only ++ -shared do not build a \`.o' file suitable for static linking ++ -static only build a \`.o' file suitable for static linking --# The commands to list exported symbols. --export_symbols_cmds=$lt_export_symbols_cmds_F77 -+ # Sentinel used to keep track of whether or not we are before -+ # the conftest object file. -+ pre_test_object_deps_done=no +- # Now actually substitute the argument into the commands. +- if test -n "$arg"; then +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- fi +- done # argument parsing loop ++COMPILE-COMMAND is a command to be used in creating a \`standard' object file ++from the given SOURCEFILE. --# The commands to extract the exported symbol list from a shared archive. --extract_expsyms_cmds=$lt_extract_expsyms_cmds -+ for p in `eval "$output_verbose_link_cmd"`; do -+ case $p in +- if test -n "$prev"; then +- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++The output file name is determined by removing the directory component from ++SOURCEFILE, then substituting the C source code suffix \`.c' with the ++library object suffix, \`.lo'." ++ ;; --# Symbols that should not be listed in the preloaded symbols. --exclude_expsyms=$lt_exclude_expsyms_F77 -+ -L* | -R* | -l*) -+ # Some compilers place space between "-{L,R}" and the path. -+ # Remove the space. -+ if test $p = "-L" || -+ test $p = "-R"; then -+ prev=$p -+ continue -+ else -+ prev= -+ fi +- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then +- eval arg=\"$export_dynamic_flag_spec\" +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- fi ++ execute) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... --# Symbols that must always be exported. --include_expsyms=$lt_include_expsyms_F77 -+ if test "$pre_test_object_deps_done" = no; then -+ case $p in -+ -L* | -R*) -+ # Internal compiler library paths should come after those -+ # provided the user. The postdeps already come after the -+ # user supplied libs so there is no need to process them. -+ if test -z "$compiler_lib_search_path_CXX"; then -+ compiler_lib_search_path_CXX="${prev}${p}" -+ else -+ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" -+ fi -+ ;; -+ # The "-l" case would never come before the object being -+ # linked, so don't bother handling this case. -+ esac -+ else -+ if test -z "$postdeps_CXX"; then -+ postdeps_CXX="${prev}${p}" -+ else -+ postdeps_CXX="${postdeps_CXX} ${prev}${p}" -+ fi -+ fi -+ ;; -+ -+ *.$objext) -+ # This assumes that the test object file only shows up -+ # once in the compiler output. -+ if test "$p" = "conftest.$objext"; then -+ pre_test_object_deps_done=yes -+ continue -+ fi +- oldlibs= +- # calculate the name of the file, without its directory +- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` +- libobjs_save="$libobjs" ++Automatically set library path, then run a program. --# ### END LIBTOOL TAG CONFIG: $tagname -+ if test "$pre_test_object_deps_done" = no; then -+ if test -z "$predep_objects_CXX"; then -+ predep_objects_CXX="$p" -+ else -+ predep_objects_CXX="$predep_objects_CXX $p" -+ fi -+ else -+ if test -z "$postdep_objects_CXX"; then -+ postdep_objects_CXX="$p" -+ else -+ postdep_objects_CXX="$postdep_objects_CXX $p" -+ fi -+ fi -+ ;; +- if test -n "$shlibpath_var"; then +- # get the directories listed in $shlibpath_var +- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` +- else +- shlib_search_path= +- fi +- eval sys_lib_search_path=\"$sys_lib_search_path_spec\" +- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" ++This mode accepts the following additional options: --__EOF__ -+ *) ;; # Ignore the rest. +- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$output_objdir" = "X$output"; then +- output_objdir="$objdir" +- else +- output_objdir="$output_objdir/$objdir" +- fi +- # Create the object directory. +- if test ! -d "$output_objdir"; then +- $show "$mkdir $output_objdir" +- $run $mkdir $output_objdir +- status=$? +- if test "$status" -ne 0 && test ! -d "$output_objdir"; then +- exit $status +- fi +- fi ++ -dlopen FILE add the directory containing FILE to the library path -+ esac -+ done +- # Determine the type of output +- case $output in +- "") +- $echo "$modename: you must specify an output file" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- *.$libext) linkmode=oldlib ;; +- *.lo | *.$objext) linkmode=obj ;; +- *.la) linkmode=lib ;; +- *) linkmode=prog ;; # Anything else should be a program. +- esac ++This mode sets the library path environment variable according to \`-dlopen' ++flags. -+ # Clean up. -+ rm -f a.out a.exe - else -- # If there is no Makefile yet, we rely on a make rule to execute -- # `config.status --recheck' to rerun these tests and create the -- # libtool script then. -- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` -- if test -f "$ltmain_in"; then -- test -f Makefile && make "$ltmain" -- fi -+ echo "libtool.m4: error: problem compiling CXX test program" - fi +- case $host in +- *cygwin* | *mingw* | *pw32*) +- # don't eliminate duplications in $postdeps and $predeps +- duplicate_compiler_generated_deps=yes +- ;; +- *) +- duplicate_compiler_generated_deps=$duplicate_deps +- ;; +- esac +- specialdeplibs= ++If any of the ARGS are libtool executable wrappers, then they are translated ++into their corresponding uninstalled binary, and any of their required library ++directories are added to the library path. -+$RM -f confest.$objext -+ -+# PORTME: override above test on systems where it is broken -+case $host_os in -+interix[3-9]*) -+ # Interix 3.5 installs completely hosed .la files for C++, so rather than -+ # hack all around it, let's just trust "g++" to DTRT. -+ predep_objects_CXX= -+ postdep_objects_CXX= -+ postdeps_CXX= -+ ;; -+ -+linux*) -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C++ 5.9 -+ -+ # The more standards-conforming stlport4 library is -+ # incompatible with the Cstd library. Avoid specifying -+ # it if it's in CXXFLAGS. Ignore libCrun as -+ # -library=stlport4 depends on it. -+ case " $CXX $CXXFLAGS " in -+ *" -library=stlport4 "*) -+ solaris_use_stlport4=yes -+ ;; -+ esac -+ -+ if test "$solaris_use_stlport4" != yes; then -+ postdeps_CXX='-library=Cstd -library=Crun' -+ fi -+ ;; -+ esac -+ ;; -+ -+solaris*) -+ case $cc_basename in -+ CC*) -+ # The more standards-conforming stlport4 library is -+ # incompatible with the Cstd library. Avoid specifying -+ # it if it's in CXXFLAGS. Ignore libCrun as -+ # -library=stlport4 depends on it. -+ case " $CXX $CXXFLAGS " in -+ *" -library=stlport4 "*) -+ solaris_use_stlport4=yes -+ ;; -+ esac -+ -+ # Adding this requires a known-good setup of shared libraries for -+ # Sun compiler versions before 5.6, else PIC objects from an old -+ # archive will be linked into the output, leading to subtle bugs. -+ if test "$solaris_use_stlport4" != yes; then -+ postdeps_CXX='-library=Cstd -library=Crun' -+ fi -+ ;; -+ esac -+ ;; -+esac -+ -+ -+case " $postdeps_CXX " in -+*" -lc "*) archive_cmds_need_lc_CXX=no ;; -+esac -+ compiler_lib_search_dirs_CXX= -+if test -n "${compiler_lib_search_path_CXX}"; then -+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -+fi -+ -+ -+ +- libs= +- # Find all interdependent deplibs by searching for libraries +- # that are linked more than once (e.g. -la -lb -la) +- for deplib in $deplibs; do +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- libs="$libs $deplib" +- done ++Then, COMMAND is executed, with ARGS as arguments." ++ ;; --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu +- if test "$linkmode" = lib; then +- libs="$predeps $libs $compiler_lib_search_path $postdeps" ++ finish) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... --CC="$lt_save_CC" +- # Compute libraries that are listed more than once in $predeps +- # $postdeps and mark them as special (i.e., whose duplicates are +- # not to be eliminated). +- pre_post_deps= +- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then +- for pre_post_dep in $predeps $postdeps; do +- case "$pre_post_deps " in +- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; +- esac +- pre_post_deps="$pre_post_deps $pre_post_dep" +- done +- fi +- pre_post_deps= +- fi ++Complete the installation of libtool libraries. +- deplibs= +- newdependency_libs= +- newlib_search_path= +- need_relink=no # whether we're linking any uninstalled libtool libraries +- notinst_deplibs= # not-installed libtool libraries +- notinst_path= # paths that contain not-installed libtool libraries +- case $linkmode in +- lib) +- passes="conv link" +- for file in $dlfiles $dlprefiles; do +- case $file in +- *.la) ;; +- *) +- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- done +- ;; +- prog) +- compile_deplibs= +- finalize_deplibs= +- alldeplibs=no +- newdlfiles= +- newdlprefiles= +- passes="conv scan dlopen dlpreopen link" +- ;; +- *) passes="conv" +- ;; +- esac +- for pass in $passes; do +- if test "$linkmode,$pass" = "lib,link" || +- test "$linkmode,$pass" = "prog,scan"; then +- libs="$deplibs" +- deplibs= +- fi +- if test "$linkmode" = prog; then +- case $pass in +- dlopen) libs="$dlfiles" ;; +- dlpreopen) libs="$dlprefiles" ;; +- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; +- esac +- fi +- if test "$pass" = dlopen; then +- # Collect dlpreopened libraries +- save_deplibs="$deplibs" +- deplibs= +- fi +- for deplib in $libs; do +- lib= +- found=no +- case $deplib in +- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- deplibs="$deplib $deplibs" +- fi +- continue +- ;; +- -l*) +- if test "$linkmode" != lib && test "$linkmode" != prog; then +- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 +- continue +- fi +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` +- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do +- for search_ext in .la $std_shrext .so .a; do +- # Search the libtool library +- lib="$searchdir/lib${name}${search_ext}" +- if test -f "$lib"; then +- if test "$search_ext" = ".la"; then +- found=yes +- else +- found=no +- fi +- break 2 +- fi +- done +- done +- if test "$found" != yes; then +- # deplib doesn't seem to be a libtool library +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- deplibs="$deplib $deplibs" +- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" +- fi +- continue +- else # deplib is a libtool library +- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, +- # We need to do some special things here, and not later. +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $deplib "*) +- if (${SED} -e '2q' $lib | +- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- library_names= +- old_library= +- case $lib in +- */* | *\\*) . $lib ;; +- *) . ./$lib ;; +- esac +- for l in $old_library $library_names; do +- ll="$l" +- done +- if test "X$ll" = "X$old_library" ; then # only static version available +- found=no +- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` +- test "X$ladir" = "X$lib" && ladir="." +- lib=$ladir/$old_library +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- deplibs="$deplib $deplibs" +- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" +- fi +- continue +- fi +- fi +- ;; +- *) ;; +- esac +- fi +- fi +- ;; # -l +- -L*) +- case $linkmode in +- lib) +- deplibs="$deplib $deplibs" +- test "$pass" = conv && continue +- newdependency_libs="$deplib $newdependency_libs" +- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` +- ;; +- prog) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- if test "$pass" = scan; then +- deplibs="$deplib $deplibs" +- else +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- fi +- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` +- ;; +- *) +- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 +- ;; +- esac # linkmode +- continue +- ;; # -L +- -R*) +- if test "$pass" = link; then +- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` +- # Make sure the xrpath contains only unique directories. +- case "$xrpath " in +- *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; +- esac +- fi +- deplibs="$deplib $deplibs" +- continue +- ;; +- *.la) lib="$deplib" ;; +- *.$libext) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- case $linkmode in +- lib) +- if test "$deplibs_check_method" != pass_all; then +- $echo +- $echo "*** Warning: Trying to link with static lib archive $deplib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have" +- $echo "*** because the file extensions .$libext of this argument makes me believe" +- $echo "*** that it is just a static archive that I should not used here." +- else +- $echo +- $echo "*** Warning: Linking the shared library $output against the" +- $echo "*** static library $deplib is not portable!" +- deplibs="$deplib $deplibs" +- fi +- continue +- ;; +- prog) +- if test "$pass" != link; then +- deplibs="$deplib $deplibs" +- else +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- fi +- continue +- ;; +- esac # linkmode +- ;; # *.$libext +- *.lo | *.$objext) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- elif test "$linkmode" = prog; then +- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then +- # If there is no dlopen support or we're linking statically, +- # we need to preload. +- newdlprefiles="$newdlprefiles $deplib" +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- newdlfiles="$newdlfiles $deplib" +- fi +- fi +- continue +- ;; +- %DEPLIBS%) +- alldeplibs=yes +- continue +- ;; +- esac # case $deplib +- if test "$found" = yes || test -f "$lib"; then : - else -- tagname="" +- $echo "$modename: cannot find the library \`$lib'" 1>&2 +- exit $EXIT_FAILURE - fi -- ;; - -- GCJ) -- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then - - - --# Source file extension for Java test sources. --ac_ext=java - --# Object file extension for compiled Java test sources. --objext=o --objext_GCJ=$objext ++Each LIBDIR is a directory that contains libtool libraries. --# Code to be used in simple compile tests --lt_simple_compile_test_code="class foo {}\n" +- # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : +- else +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE +- fi ++The commands that this mode executes may require superuser privileges. Use ++the \`--dry-run' option if you just want to see what would be executed." ++ ;; --# Code to be used in simple link tests --lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }\n' +- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` +- test "X$ladir" = "X$lib" && ladir="." ++ install) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... --# ltmain only uses $CC for tagged configurations so make sure $CC is set. +- dlname= +- dlopen= +- dlpreopen= +- libdir= +- library_names= +- old_library= +- # If the library was installed with an old release of libtool, +- # it will not redefine variables installed, or shouldnotlink +- installed=yes +- shouldnotlink=no ++Install executables or libraries. --# If no C compiler was specified, use CC. --LTCC=${LTCC-"$CC"} +- # Read the .la file +- case $lib in +- */* | *\\*) . $lib ;; +- *) . ./$lib ;; +- esac ++INSTALL-COMMAND is the installation command. The first component should be ++either the \`install' or \`cp' program. --# Allow CC to be a program name with arguments. --compiler=$CC +- if test "$linkmode,$pass" = "lib,link" || +- test "$linkmode,$pass" = "prog,scan" || +- { test "$linkmode" != prog && test "$linkmode" != lib; }; then +- test -n "$dlopen" && dlfiles="$dlfiles $dlopen" +- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" +- fi ++The following components of INSTALL-COMMAND are treated specially: +- if test "$pass" = conv; then +- # Only check for convenience libraries +- deplibs="$lib $deplibs" +- if test -z "$libdir"; then +- if test -z "$old_library"; then +- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit $EXIT_FAILURE +- fi +- # It is a libtool convenience library, so add in its objects. +- convenience="$convenience $ladir/$objdir/$old_library" +- old_convenience="$old_convenience $ladir/$objdir/$old_library" +- tmp_libs= +- for deplib in $dependency_libs; do +- deplibs="$deplib $deplibs" +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- tmp_libs="$tmp_libs $deplib" +- done +- elif test "$linkmode" != prog && test "$linkmode" != lib; then +- $echo "$modename: \`$lib' is not a convenience library" 1>&2 +- exit $EXIT_FAILURE +- fi +- continue +- fi # $pass = conv ++ -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation --# Allow CC to be a program name with arguments. --lt_save_CC="$CC" --CC=${GCJ-"gcj"} --compiler=$CC --compiler_GCJ=$CC ++The rest of the components are interpreted as arguments to that command (only ++BSD-compatible install options are recognized)." ++ ;; --# GCJ did not exist at the time GCC didn't implicitly link libc in. --archive_cmds_need_lc_GCJ=no +- # Get the name of the library we link against. +- linklib= +- for l in $old_library $library_names; do +- linklib="$l" +- done +- if test -z "$linklib"; then +- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit $EXIT_FAILURE +- fi ++ link) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... +- # This library was specified with -dlopen. +- if test "$pass" = dlopen; then +- if test -z "$libdir"; then +- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 +- exit $EXIT_FAILURE +- fi +- if test -z "$dlname" || +- test "$dlopen_support" != yes || +- test "$build_libtool_libs" = no; then +- # If there is no dlname, no dlopen support or we're linking +- # statically, we need to preload. We also need to preload any +- # dependent libraries so libltdl's deplib preloader doesn't +- # bomb out in the load deplibs phase. +- dlprefiles="$dlprefiles $lib $dependency_libs" +- else +- newdlfiles="$newdlfiles $lib" +- fi +- continue +- fi # $pass = dlopen ++Link object files or libraries together to form another library, or to ++create an executable program. --lt_prog_compiler_no_builtin_flag_GCJ= +- # We need an absolute path. +- case $ladir in +- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; +- *) +- abs_ladir=`cd "$ladir" && pwd` +- if test -z "$abs_ladir"; then +- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 +- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 +- abs_ladir="$ladir" +- fi +- ;; +- esac +- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` ++LINK-COMMAND is a command using the C compiler that you would use to create ++a program from several object files. --if test "$GCC" = yes; then -- lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' +- # Find the relevant object directory and library name. +- if test "X$installed" = Xyes; then +- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then +- $echo "$modename: warning: library \`$lib' was moved." 1>&2 +- dir="$ladir" +- absdir="$abs_ladir" +- libdir="$abs_ladir" +- else +- dir="$libdir" +- absdir="$libdir" +- fi +- else +- dir="$ladir/$objdir" +- absdir="$abs_ladir/$objdir" +- # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" +- fi # $installed = yes +- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` ++The following components of LINK-COMMAND are treated specially: +- # This library was specified with -dlpreopen. +- if test "$pass" = dlpreopen; then +- if test -z "$libdir"; then +- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 +- exit $EXIT_FAILURE +- fi +- # Prefer using a static library (so that no silly _DYNAMIC symbols +- # are required to link). +- if test -n "$old_library"; then +- newdlprefiles="$newdlprefiles $dir/$old_library" +- # Otherwise, use the dlname, so that lt_dlopen finds it. +- elif test -n "$dlname"; then +- newdlprefiles="$newdlprefiles $dir/$dlname" +- else +- newdlprefiles="$newdlprefiles $dir/$linklib" +- fi +- fi # $pass = dlpreopen ++ -all-static do not do any dynamic linking at all ++ -avoid-version do not add a version suffix if possible ++ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime ++ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols ++ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) ++ -export-symbols SYMFILE ++ try to export only the symbols listed in SYMFILE ++ -export-symbols-regex REGEX ++ try to export only the symbols matching REGEX ++ -LLIBDIR search LIBDIR for required installed libraries ++ -lNAME OUTPUT-FILE requires the installed library libNAME ++ -module build a library that can dlopened ++ -no-fast-install disable the fast-install mode ++ -no-install link a not-installable executable ++ -no-undefined declare that a library does not refer to external symbols ++ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects ++ -objectlist FILE Use a list of object files found in FILE to specify objects ++ -precious-files-regex REGEX ++ don't remove output files matching REGEX ++ -release RELEASE specify package release information ++ -rpath LIBDIR the created library will eventually be installed in LIBDIR ++ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries ++ -shared only do dynamic linking of libtool libraries ++ -shrext SUFFIX override the standard shared library file extension ++ -static do not do any dynamic linking of uninstalled libtool libraries ++ -static-libtool-libs ++ do not do any dynamic linking of libtool libraries ++ -version-info CURRENT[:REVISION[:AGE]] ++ specify library version info [each variable defaults to 0] ++ -weak LIBNAME declare that the target provides the LIBNAME interface --echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 --echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 --if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- lt_cv_prog_compiler_rtti_exceptions=no -- ac_outfile=conftest.$ac_objext -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -- lt_compiler_flag="-fno-rtti -fno-exceptions" -- # Insert the option either (1) after the last *FLAGS variable, or -- # (2) before a word containing "conftest.", or (3) at the end. -- # Note that $ac_compile itself does not contain backslashes and begins -- # with a dollar sign (not a hyphen), so the echo should work correctly. -- # The option is referenced via a variable to avoid confusing sed. -- lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -- -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:15526: $lt_compile\"" >&5) -- (eval "$lt_compile" 2>conftest.err) -- ac_status=$? -- cat conftest.err >&5 -- echo "$as_me:15530: \$? = $ac_status" >&5 -- if (exit $ac_status) && test -s "$ac_outfile"; then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s conftest.err; then -- lt_cv_prog_compiler_rtti_exceptions=yes -- fi -- fi -- $rm conftest* +- if test -z "$libdir"; then +- # Link the convenience library +- if test "$linkmode" = lib; then +- deplibs="$dir/$old_library $deplibs" +- elif test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$dir/$old_library $compile_deplibs" +- finalize_deplibs="$dir/$old_library $finalize_deplibs" +- else +- deplibs="$lib $deplibs" # used for prog,scan pass +- fi +- continue +- fi ++All other options (arguments beginning with \`-') are ignored. --fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 ++Every other argument is treated as a filename. Files ending in \`.la' are ++treated as uninstalled libtool libraries, other files are standard or library ++object files. --if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then -- lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" --else -- : --fi +- if test "$linkmode" = prog && test "$pass" != link; then +- newlib_search_path="$newlib_search_path $ladir" +- deplibs="$lib $deplibs" ++If the OUTPUT-FILE ends in \`.la', then a libtool library is created, ++only library objects (\`.lo' files) may be specified, and \`-rpath' is ++required, except when creating a convenience library. --fi +- linkalldeplibs=no +- if test "$link_all_deplibs" != no || test -z "$library_names" || +- test "$build_libtool_libs" = no; then +- linkalldeplibs=yes +- fi ++If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created ++using \`ar' and \`ranlib', or on Windows using \`lib'. --lt_prog_compiler_wl_GCJ= --lt_prog_compiler_pic_GCJ= --lt_prog_compiler_static_GCJ= +- tmp_libs= +- for deplib in $dependency_libs; do +- case $deplib in +- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test +- esac +- # Need to link against all dependency_libs? +- if test "$linkalldeplibs" = yes; then +- deplibs="$deplib $deplibs" +- else +- # Need to hardcode shared library paths +- # or/and link against static libraries +- newdependency_libs="$deplib $newdependency_libs" +- fi +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- tmp_libs="$tmp_libs $deplib" +- done # for deplib +- continue +- fi # $linkmode = prog... ++If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file ++is created, otherwise an executable program is created." ++ ;; --echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 --echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 +- if test "$linkmode,$pass" = "prog,link"; then +- if test -n "$library_names" && +- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then +- # We need to hardcode the library path +- if test -n "$shlibpath_var"; then +- # Make sure the rpath contains only unique directories. +- case "$temp_rpath " in +- *" $dir "*) ;; +- *" $absdir "*) ;; +- *) temp_rpath="$temp_rpath $dir" ;; +- esac +- fi ++ uninstall) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... -- if test "$GCC" = yes; then -- lt_prog_compiler_wl_GCJ='-Wl,' -- lt_prog_compiler_static_GCJ='-static' -+ -+ lt_prog_compiler_wl_CXX= -+lt_prog_compiler_pic_CXX= -+lt_prog_compiler_static_CXX= -+ -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -+$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -+ -+ # C++ specific cases for pic, static, wl, etc. -+ if test "$GXX" = yes; then -+ lt_prog_compiler_wl_CXX='-Wl,' -+ lt_prog_compiler_static_CXX='-static' +- # Hardcode the library path. +- # Skip directories that are in the system default run-time +- # search path. +- case " $sys_lib_dlsearch_path " in +- *" $absdir "*) ;; +- *) +- case "$compile_rpath " in +- *" $absdir "*) ;; +- *) compile_rpath="$compile_rpath $absdir" +- esac +- ;; +- esac +- case " $sys_lib_dlsearch_path " in +- *" $libdir "*) ;; +- *) +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" +- esac +- ;; +- esac +- fi # $linkmode,$pass = prog,link... ++Remove libraries from an installation directory. - case $host_os in -- aix*) -+ aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor -- lt_prog_compiler_static_GCJ='-Bstatic' -+ lt_prog_compiler_static_CXX='-Bstatic' - fi - ;; +- if test "$alldeplibs" = yes && +- { test "$deplibs_check_method" = pass_all || +- { test "$build_libtool_libs" = yes && +- test -n "$library_names"; }; }; then +- # We only need to search for static libraries +- continue +- fi +- fi ++RM is the name of the program to use to delete files associated with each FILE ++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed ++to RM. - amigaos*) -- # FIXME: we need at least 68020 code to build shared libraries, but -- # adding the `-m68020' flag to GCC prevents building anything better, -- # like `-m68040'. -- lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' -+ case $host_cpu in -+ powerpc) -+ # see comment about AmigaOS4 .so support -+ lt_prog_compiler_pic_CXX='-fPIC' -+ ;; -+ m68k) -+ # FIXME: we need at least 68020 code to build shared libraries, but -+ # adding the `-m68020' flag to GCC prevents building anything better, -+ # like `-m68040'. -+ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' +- link_static=no # Whether the deplib will be linked statically +- if test -n "$library_names" && +- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then +- if test "$installed" = no; then +- notinst_deplibs="$notinst_deplibs $lib" +- need_relink=yes +- fi +- # This is a shared library ++If FILE is a libtool library, all the files associated with it are deleted. ++Otherwise, only FILE itself is deleted using RM." + ;; -+ esac - ;; - -- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) -+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; -- -- mingw* | pw32* | os2*) -+ mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). -- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' -+ # Although the cygwin gcc ignores -fPIC, still need this for old-style -+ # (--disable-auto-import) libraries -+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT' - ;; -- - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files -- lt_prog_compiler_pic_GCJ='-fno-common' -+ lt_prog_compiler_pic_CXX='-fno-common' - ;; -- -- msdosdjgpp*) -- # Just because we use GCC doesn't mean we suddenly get shared libraries -- # on systems that don't support them. -- lt_prog_compiler_can_build_shared_GCJ=no -- enable_shared=no -+ *djgpp*) -+ # DJGPP does not support shared libraries at all -+ lt_prog_compiler_pic_CXX= -+ ;; -+ interix[3-9]*) -+ # Interix 3.x gcc -fpic/-fPIC options generate broken code. -+ # Instead, we relocate shared libraries at runtime. - ;; -- - sysv4*MP*) - if test -d /usr/nec; then -- lt_prog_compiler_pic_GCJ=-Kconform_pic -+ lt_prog_compiler_pic_CXX=-Kconform_pic - fi - ;; -- - hpux*) -- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -- # not for PA HP-UX. -- case "$host_cpu" in -- hppa*64*|ia64*) -- # +Z the default -+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit -+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag -+ # sets the default TLS model and affects inlining. -+ case $host_cpu in -+ hppa*64*) - ;; - *) -- lt_prog_compiler_pic_GCJ='-fPIC' -+ lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac - ;; -- -+ *qnx* | *nto*) -+ # QNX uses GNU C++, but need to define -shared option too, otherwise -+ # it will coredump. -+ lt_prog_compiler_pic_CXX='-fPIC -shared' -+ ;; - *) -- lt_prog_compiler_pic_GCJ='-fPIC' -+ lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac - else -- # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in -- aix*) -- lt_prog_compiler_wl_GCJ='-Wl,' -- if test "$host_cpu" = ia64; then -- # AIX 5 now supports IA64 processor -- lt_prog_compiler_static_GCJ='-Bstatic' -- else -- lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' -- fi -- ;; -- -- mingw* | pw32* | os2*) -- # This hack is so that the source file can tell whether it is being -- # built for inclusion in a dll (and should export symbols for example). -- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' -- ;; -- -- hpux9* | hpux10* | hpux11*) -- lt_prog_compiler_wl_GCJ='-Wl,' -- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -- # not for PA HP-UX. -- case "$host_cpu" in -- hppa*64*|ia64*) -- # +Z the default -+ aix[4-9]*) -+ # All AIX code is PIC. -+ if test "$host_cpu" = ia64; then -+ # AIX 5 now supports IA64 processor -+ lt_prog_compiler_static_CXX='-Bstatic' -+ else -+ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' -+ fi - ;; -- *) -- lt_prog_compiler_pic_GCJ='+Z' -+ chorus*) -+ case $cc_basename in -+ cxch68*) -+ # Green Hills C++ Compiler -+ # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" -+ ;; -+ esac - ;; -- esac -- # Is there a better lt_prog_compiler_static that works with the bundled CC? -- lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' -- ;; -- -- irix5* | irix6* | nonstopux*) -- lt_prog_compiler_wl_GCJ='-Wl,' -- # PIC (with -KPIC) is the default. -- lt_prog_compiler_static_GCJ='-non_shared' -- ;; -- -- newsos6) -- lt_prog_compiler_pic_GCJ='-KPIC' -- lt_prog_compiler_static_GCJ='-Bstatic' -- ;; -- -- linux*) -- case $CC in -- icc* | ecc*) -- lt_prog_compiler_wl_GCJ='-Wl,' -- lt_prog_compiler_pic_GCJ='-KPIC' -- lt_prog_compiler_static_GCJ='-static' -- ;; -- ccc*) -- lt_prog_compiler_wl_GCJ='-Wl,' -- # All Alpha code is PIC. -- lt_prog_compiler_static_GCJ='-non_shared' -+ dgux*) -+ case $cc_basename in -+ ec++*) -+ lt_prog_compiler_pic_CXX='-KPIC' -+ ;; -+ ghcx*) -+ # Green Hills C++ Compiler -+ lt_prog_compiler_pic_CXX='-pic' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ freebsd* | dragonfly*) -+ # FreeBSD uses GNU C++ -+ ;; -+ hpux9* | hpux10* | hpux11*) -+ case $cc_basename in -+ CC*) -+ lt_prog_compiler_wl_CXX='-Wl,' -+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' -+ if test "$host_cpu" != ia64; then -+ lt_prog_compiler_pic_CXX='+Z' -+ fi -+ ;; -+ aCC*) -+ lt_prog_compiler_wl_CXX='-Wl,' -+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' -+ case $host_cpu in -+ hppa*64*|ia64*) -+ # +Z the default -+ ;; -+ *) -+ lt_prog_compiler_pic_CXX='+Z' -+ ;; -+ esac -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ interix*) -+ # This is c89, which is MS Visual C++ (no shared libs) -+ # Anyone wants to do a port? -+ ;; -+ irix5* | irix6* | nonstopux*) -+ case $cc_basename in -+ CC*) -+ lt_prog_compiler_wl_CXX='-Wl,' -+ lt_prog_compiler_static_CXX='-non_shared' -+ # CC pic flag -KPIC is the default. -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ case $cc_basename in -+ KCC*) -+ # KAI C++ Compiler -+ lt_prog_compiler_wl_CXX='--backend -Wl,' -+ lt_prog_compiler_pic_CXX='-fPIC' -+ ;; -+ ecpc* ) -+ # old Intel C++ for x86_64 which still supported -KPIC. -+ lt_prog_compiler_wl_CXX='-Wl,' -+ lt_prog_compiler_pic_CXX='-KPIC' -+ lt_prog_compiler_static_CXX='-static' -+ ;; -+ icpc* ) -+ # Intel C++, used to be incompatible with GCC. -+ # ICC 10 doesn't accept -KPIC any more. -+ lt_prog_compiler_wl_CXX='-Wl,' -+ lt_prog_compiler_pic_CXX='-fPIC' -+ lt_prog_compiler_static_CXX='-static' -+ ;; -+ pgCC* | pgcpp*) -+ # Portland Group C++ compiler -+ lt_prog_compiler_wl_CXX='-Wl,' -+ lt_prog_compiler_pic_CXX='-fpic' -+ lt_prog_compiler_static_CXX='-Bstatic' -+ ;; -+ cxx*) -+ # Compaq C++ -+ # Make sure the PIC flag is empty. It appears that all Alpha -+ # Linux and Compaq Tru64 Unix objects are PIC. -+ lt_prog_compiler_pic_CXX= -+ lt_prog_compiler_static_CXX='-non_shared' -+ ;; -+ xlc* | xlC*) -+ # IBM XL 8.0 on PPC -+ lt_prog_compiler_wl_CXX='-Wl,' -+ lt_prog_compiler_pic_CXX='-qpic' -+ lt_prog_compiler_static_CXX='-qstaticlink' -+ ;; -+ *) -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C++ 5.9 -+ lt_prog_compiler_pic_CXX='-KPIC' -+ lt_prog_compiler_static_CXX='-Bstatic' -+ lt_prog_compiler_wl_CXX='-Qoption ld ' -+ ;; -+ esac -+ ;; -+ esac -+ ;; -+ lynxos*) -+ ;; -+ m88k*) -+ ;; -+ mvs*) -+ case $cc_basename in -+ cxx*) -+ lt_prog_compiler_pic_CXX='-W c,exportall' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ netbsd* | netbsdelf*-gnu) -+ ;; -+ *qnx* | *nto*) -+ # QNX uses GNU C++, but need to define -shared option too, otherwise -+ # it will coredump. -+ lt_prog_compiler_pic_CXX='-fPIC -shared' - ;; -- esac -- ;; -- -- osf3* | osf4* | osf5*) -- lt_prog_compiler_wl_GCJ='-Wl,' -- # All OSF/1 code is PIC. -- lt_prog_compiler_static_GCJ='-non_shared' -- ;; -- -- sco3.2v5*) -- lt_prog_compiler_pic_GCJ='-Kpic' -- lt_prog_compiler_static_GCJ='-dn' -- ;; -- -- solaris*) -- lt_prog_compiler_wl_GCJ='-Wl,' -- lt_prog_compiler_pic_GCJ='-KPIC' -- lt_prog_compiler_static_GCJ='-Bstatic' -- ;; -- -- sunos4*) -- lt_prog_compiler_wl_GCJ='-Qoption ld ' -- lt_prog_compiler_pic_GCJ='-PIC' -- lt_prog_compiler_static_GCJ='-Bstatic' -- ;; -- -- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -- lt_prog_compiler_wl_GCJ='-Wl,' -- lt_prog_compiler_pic_GCJ='-KPIC' -- lt_prog_compiler_static_GCJ='-Bstatic' -- ;; -- -- sysv4*MP*) -- if test -d /usr/nec ;then -- lt_prog_compiler_pic_GCJ='-Kconform_pic' -- lt_prog_compiler_static_GCJ='-Bstatic' -- fi -- ;; -- -- uts4*) -- lt_prog_compiler_pic_GCJ='-pic' -- lt_prog_compiler_static_GCJ='-Bstatic' -- ;; -- -- *) -- lt_prog_compiler_can_build_shared_GCJ=no -- ;; -+ osf3* | osf4* | osf5*) -+ case $cc_basename in -+ KCC*) -+ lt_prog_compiler_wl_CXX='--backend -Wl,' -+ ;; -+ RCC*) -+ # Rational C++ 2.4.1 -+ lt_prog_compiler_pic_CXX='-pic' -+ ;; -+ cxx*) -+ # Digital/Compaq C++ -+ lt_prog_compiler_wl_CXX='-Wl,' -+ # Make sure the PIC flag is empty. It appears that all Alpha -+ # Linux and Compaq Tru64 Unix objects are PIC. -+ lt_prog_compiler_pic_CXX= -+ lt_prog_compiler_static_CXX='-non_shared' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ psos*) -+ ;; -+ solaris*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.2, 5.x and Centerline C++ -+ lt_prog_compiler_pic_CXX='-KPIC' -+ lt_prog_compiler_static_CXX='-Bstatic' -+ lt_prog_compiler_wl_CXX='-Qoption ld ' -+ ;; -+ gcx*) -+ # Green Hills C++ Compiler -+ lt_prog_compiler_pic_CXX='-PIC' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ sunos4*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.x -+ lt_prog_compiler_pic_CXX='-pic' -+ lt_prog_compiler_static_CXX='-Bstatic' -+ ;; -+ lcc*) -+ # Lucid -+ lt_prog_compiler_pic_CXX='-pic' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) -+ case $cc_basename in -+ CC*) -+ lt_prog_compiler_wl_CXX='-Wl,' -+ lt_prog_compiler_pic_CXX='-KPIC' -+ lt_prog_compiler_static_CXX='-Bstatic' -+ ;; -+ esac -+ ;; -+ tandem*) -+ case $cc_basename in -+ NCC*) -+ # NonStop-UX NCC 3.20 -+ lt_prog_compiler_pic_CXX='-KPIC' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ vxworks*) -+ ;; -+ *) -+ lt_prog_compiler_can_build_shared_CXX=no -+ ;; - esac - fi --echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 --echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6 -- --# --# Check to make sure the PIC flag actually works. --# --if test -n "$lt_prog_compiler_pic_GCJ"; then -- --echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 --echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6 --if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- lt_prog_compiler_pic_works_GCJ=no -- ac_outfile=conftest.$ac_objext -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -- lt_compiler_flag="$lt_prog_compiler_pic_GCJ" -- # Insert the option either (1) after the last *FLAGS variable, or -- # (2) before a word containing "conftest.", or (3) at the end. -- # Note that $ac_compile itself does not contain backslashes and begins -- # with a dollar sign (not a hyphen), so the echo should work correctly. -- # The option is referenced via a variable to avoid confusing sed. -- lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -- -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:15759: $lt_compile\"" >&5) -- (eval "$lt_compile" 2>conftest.err) -- ac_status=$? -- cat conftest.err >&5 -- echo "$as_me:15763: \$? = $ac_status" >&5 -- if (exit $ac_status) && test -s "$ac_outfile"; then -- # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s conftest.err; then -- lt_prog_compiler_pic_works_GCJ=yes -- fi -- fi -- $rm conftest* -- --fi --echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 --echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6 -- --if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then -- case $lt_prog_compiler_pic_GCJ in -- "" | " "*) ;; -- *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; -- esac --else -- lt_prog_compiler_pic_GCJ= -- lt_prog_compiler_can_build_shared_GCJ=no --fi -- --fi --case "$host_os" in -+case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) -- lt_prog_compiler_pic_GCJ= -+ lt_prog_compiler_pic_CXX= - ;; - *) -- lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" -+ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" - ;; - esac -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5 -+$as_echo "$lt_prog_compiler_pic_CXX" >&6; } +- # Warn about portability, can't link against -module's on +- # some systems (darwin) +- if test "$shouldnotlink" = yes && test "$pass" = link ; then +- $echo +- if test "$linkmode" = prog; then +- $echo "*** Warning: Linking the executable $output against the loadable module" +- else +- $echo "*** Warning: Linking the shared library $output against the loadable module" +- fi +- $echo "*** $linklib is not portable!" +- fi +- if test "$linkmode" = lib && +- test "$hardcode_into_libs" = yes; then +- # Hardcode the library path. +- # Skip directories that are in the system default run-time +- # search path. +- case " $sys_lib_dlsearch_path " in +- *" $absdir "*) ;; +- *) +- case "$compile_rpath " in +- *" $absdir "*) ;; +- *) compile_rpath="$compile_rpath $absdir" +- esac +- ;; +- esac +- case " $sys_lib_dlsearch_path " in +- *" $libdir "*) ;; +- *) +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" +- esac +- ;; +- esac +- fi ++ *) ++ func_fatal_help "invalid operation mode \`$mode'" ++ ;; ++ esac --echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 --echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 --if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- lt_cv_prog_compiler_c_o_GCJ=no -- $rm -r conftest 2>/dev/null -- mkdir conftest -- cd conftest -- mkdir out -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +- if test -n "$old_archive_from_expsyms_cmds"; then +- # figure out the soname +- set dummy $library_names +- realname="$2" +- shift; shift +- libname=`eval \\$echo \"$libname_spec\"` +- # use dlname if we got it. it's perfectly good, no? +- if test -n "$dlname"; then +- soname="$dlname" +- elif test -n "$soname_spec"; then +- # bleh windows +- case $host in +- *cygwin* | mingw*) +- major=`expr $current - $age` +- versuffix="-$major" +- ;; +- esac +- eval soname=\"$soname_spec\" +- else +- soname="$realname" +- fi ++ $ECHO ++ $ECHO "Try \`$progname --help' for more information about other modes." -- lt_compiler_flag="-o out/conftest2.$ac_objext" -+ -+# -+# Check to make sure the PIC flag actually works. -+# -+if test -n "$lt_prog_compiler_pic_CXX"; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 -+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } -+if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_prog_compiler_pic_works_CXX=no -+ ac_outfile=conftest.$ac_objext -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. -+ # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ -- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:15819: $lt_compile\"" >&5) -- (eval "$lt_compile" 2>out/conftest.err) -+ (eval echo "\"\$as_me:13328: $lt_compile\"" >&5) -+ (eval "$lt_compile" 2>conftest.err) - ac_status=$? -- cat out/conftest.err >&5 -- echo "$as_me:15823: \$? = $ac_status" >&5 -- if (exit $ac_status) && test -s out/conftest2.$ac_objext -- then -+ cat conftest.err >&5 -+ echo "$as_me:13332: \$? = $ac_status" >&5 -+ if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized -- # So say no if there are warnings -- if test ! -s out/conftest.err; then -- lt_cv_prog_compiler_c_o_GCJ=yes -+ # So say no if there are warnings other than the usual output. -+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp -+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 -+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then -+ lt_cv_prog_compiler_pic_works_CXX=yes - fi - fi -- chmod u+w . -- $rm conftest* -- # SGI C++ compiler will create directory out/ii_files/ for -- # template instantiation -- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files -- $rm out/* && rmdir out -- cd .. -- rmdir conftest -- $rm conftest* -+ $RM conftest* +- # Make a new name for the extract_expsyms_cmds to use +- soroot="$soname" +- soname=`$echo $soroot | ${SED} -e 's/^.*\///'` +- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" ++ exit $? ++} - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 -+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } +- # If the library has no export list, then create one now +- if test -f "$output_objdir/$soname-def"; then : +- else +- $show "extracting exported symbol list from \`$soname'" +- save_ifs="$IFS"; IFS='~' +- cmds=$extract_expsyms_cmds +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi ++ # Now that we've collected a possible --mode arg, show help if necessary ++ $opt_help && func_mode_help -- --hard_links="nottested" --if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then -- # do not overwrite the value of need_locks provided by the user -- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 --echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 -- hard_links=yes -- $rm conftest* -- ln conftest.a conftest.b 2>/dev/null && hard_links=no -- touch conftest.a -- ln conftest.a conftest.b 2>&5 || hard_links=no -- ln conftest.a conftest.b 2>/dev/null && hard_links=no -- echo "$as_me:$LINENO: result: $hard_links" >&5 --echo "${ECHO_T}$hard_links" >&6 -- if test "$hard_links" = no; then -- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 --echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} -- need_locks=warn -- fi --else -- need_locks=no --fi -- --echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 --echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 -- -- runpath_var= -- allow_undefined_flag_GCJ= -- enable_shared_with_static_runtimes_GCJ=no -- archive_cmds_GCJ= -- archive_expsym_cmds_GCJ= -- old_archive_From_new_cmds_GCJ= -- old_archive_from_expsyms_cmds_GCJ= -- export_dynamic_flag_spec_GCJ= -- whole_archive_flag_spec_GCJ= -- thread_safe_flag_spec_GCJ= -- hardcode_libdir_flag_spec_GCJ= -- hardcode_libdir_flag_spec_ld_GCJ= -- hardcode_libdir_separator_GCJ= -- hardcode_direct_GCJ=no -- hardcode_minus_L_GCJ=no -- hardcode_shlibpath_var_GCJ=unsupported -- link_all_deplibs_GCJ=unknown -- hardcode_automatic_GCJ=no -- module_cmds_GCJ= -- module_expsym_cmds_GCJ= -- always_export_symbols_GCJ=no -- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -- # include_expsyms should be a list of space-separated symbols to be *always* -- # included in the symbol list -- include_expsyms_GCJ= -- # exclude_expsyms can be an extended regexp of symbols to exclude -- # it will be wrapped by ` (' and `)$', so one must not match beginning or -- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -- # as well as any symbol that contains `d'. -- exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" -- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -- # platforms (ab)use it in PIC code, but their linkers get confused if -- # the symbol is explicitly referenced. Since portable code cannot -- # rely on this symbol name, it's probably fine to never include it in -- # preloaded symbol tables. -- extract_expsyms_cmds= -- -- case $host_os in -- cygwin* | mingw* | pw32*) -- # FIXME: the MSVC++ port hasn't been tested in a loooong time -- # When not using gcc, we currently assume that we are using -- # Microsoft Visual C++. -- if test "$GCC" != yes; then -- with_gnu_ld=no -- fi -- ;; -- openbsd*) -- with_gnu_ld=no -- ;; -- esac -- -- ld_shlibs_GCJ=yes -- if test "$with_gnu_ld" = yes; then -- # If archive_cmds runs LD, not CC, wlarc should be empty -- wlarc='${wl}' -- -- # See if GNU ld supports shared libraries. -- case $host_os in -- aix3* | aix4* | aix5*) -- # On AIX/PPC, the GNU linker is very broken -- if test "$host_cpu" != ia64; then -- ld_shlibs_GCJ=no -- cat <&2 -- --*** Warning: the GNU linker, at least up to release 2.9.1, is reported --*** to be unable to reliably create shared libraries on AIX. --*** Therefore, libtool is disabling shared libraries support. If you --*** really care for shared libraries, you may want to modify your PATH --*** so that a non-GNU linker is found, and then restart. -- --EOF -- fi -- ;; -- -- amigaos*) -- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -- hardcode_libdir_flag_spec_GCJ='-L$libdir' -- hardcode_minus_L_GCJ=yes -- -- # Samuel A. Falvo II reports -- # that the semantics of dynamic libraries on AmigaOS, at least up -- # to version 4, is to share data among multiple programs linked -- # with the same dynamic library. Since this doesn't match the -- # behavior of shared libraries on other platforms, we can't use -- # them. -- ld_shlibs_GCJ=no -- ;; -- -- beos*) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- allow_undefined_flag_GCJ=unsupported -- # Joseph Beckenbach says some releases of gcc -- # support --undefined. This deserves some investigation. FIXME -- archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- else -- ld_shlibs_GCJ=no -- fi -- ;; -- -- cygwin* | mingw* | pw32*) -- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, -- # as there is no search path for DLLs. -- hardcode_libdir_flag_spec_GCJ='-L$libdir' -- allow_undefined_flag_GCJ=unsupported -- always_export_symbols_GCJ=no -- enable_shared_with_static_runtimes_GCJ=yes -- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* $[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' -- -- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then -- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- # If the export-symbols file already is a .def file (1st line -- # is EXPORTS), use it as is; otherwise, prepend... -- archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -- cp $export_symbols $output_objdir/$soname.def; -- else -- echo EXPORTS > $output_objdir/$soname.def; -- cat $export_symbols >> $output_objdir/$soname.def; -- fi~ -- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' -- else -- ld_shlibs=no -- fi -- ;; -- -- netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' -- wlarc= -- else -- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- fi -- ;; -- -- solaris* | sysv5*) -- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then -- ld_shlibs_GCJ=no -- cat <&2 -- --*** Warning: The releases 2.8.* of the GNU linker cannot reliably --*** create shared libraries on Solaris systems. Therefore, libtool --*** is disabling shared libraries support. We urge you to upgrade GNU --*** binutils to release 2.9.1 or newer. Another option is to modify --*** your PATH or compiler configuration so that the native linker is --*** used, and then restart. -- --EOF -- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- else -- ld_shlibs_GCJ=no -- fi -- ;; -- -- sunos4*) -- archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- wlarc= -- hardcode_direct_GCJ=yes -- hardcode_shlibpath_var_GCJ=no -- ;; -- -- linux*) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_cmds_GCJ="$tmp_archive_cmds" -- supports_anon_versioning=no -- case `$LD -v 2>/dev/null` in -- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 -- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... -- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... -- *\ 2.11.*) ;; # other 2.11 versions -- *) supports_anon_versioning=yes ;; -- esac -- if test $supports_anon_versioning = yes; then -- archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ --cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ --$echo "local: *; };" >> $output_objdir/$libname.ver~ -- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' -- else -- archive_expsym_cmds_GCJ="$tmp_archive_cmds" -- fi -- else -- ld_shlibs_GCJ=no -- fi -- ;; -- -- *) -- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then -- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -- else -- ld_shlibs_GCJ=no -- fi -- ;; -- esac -- -- if test "$ld_shlibs_GCJ" = yes; then -- runpath_var=LD_RUN_PATH -- hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' -- export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' -- # ancient GNU ld didn't support --whole-archive et. al. -- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then -- whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -- else -- whole_archive_flag_spec_GCJ= -- fi -- fi -- else -- # PORTME fill in a description of your system's linker (not GNU ld) -- case $host_os in -- aix3*) -- allow_undefined_flag_GCJ=unsupported -- always_export_symbols_GCJ=yes -- archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' -- # Note: this linker hardcodes the directories in LIBPATH if there -- # are no directories specified by -L. -- hardcode_minus_L_GCJ=yes -- if test "$GCC" = yes && test -z "$link_static_flag"; then -- # Neither direct hardcoding nor static linking is supported with a -- # broken collect2. -- hardcode_direct_GCJ=unsupported -- fi -- ;; -- -- aix4* | aix5*) -- if test "$host_cpu" = ia64; then -- # On IA64, the linker does run time linking by default, so we don't -- # have to do anything special. -- aix_use_runtimelinking=no -- exp_sym_flag='-Bexport' -- no_entry_flag="" -- else -- # If we're using GNU nm, then we don't want the "-C" option. -- # -C means demangle to AIX nm, but means don't demangle with GNU nm -- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then -- export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' -- else -- export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' -- fi -- aix_use_runtimelinking=no -- -- # Test if we are trying to use run time linking or normal -- # AIX style linking. If -brtl is somewhere in LDFLAGS, we -- # need to do runtime linking. -- case $host_os in aix4.[23]|aix4.[23].*|aix5*) -- for ld_flag in $LDFLAGS; do -- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then -- aix_use_runtimelinking=yes -- break -- fi -- done -- esac -- -- exp_sym_flag='-bexport' -- no_entry_flag='-bnoentry' -- fi -- -- # When large executables or shared objects are built, AIX ld can -- # have problems creating the table of contents. If linking a library -- # or program results in "error TOC overflow" add -mminimal-toc to -- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not -- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -- -- archive_cmds_GCJ='' -- hardcode_direct_GCJ=yes -- hardcode_libdir_separator_GCJ=':' -- link_all_deplibs_GCJ=yes -- -- if test "$GCC" = yes; then -- case $host_os in aix4.012|aix4.012.*) -- # We only want to do this on AIX 4.2 and lower, the check -- # below for broken collect2 doesn't work under 4.3+ -- collect2name=`${CC} -print-prog-name=collect2` -- if test -f "$collect2name" && \ -- strings "$collect2name" | grep resolve_lib_name >/dev/null -- then -- # We have reworked collect2 -- hardcode_direct_GCJ=yes +- # Create $newlib +- if test -f "$output_objdir/$newlib"; then :; else +- $show "generating import library for \`$soname'" +- save_ifs="$IFS"; IFS='~' +- cmds=$old_archive_from_expsyms_cmds +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi +- # make sure the library variables are pointing to the new library +- dir=$output_objdir +- linklib=$newlib +- fi # test -n "$old_archive_from_expsyms_cmds" + +- if test "$linkmode" = prog || test "$mode" != relink; then +- add_shlibpath= +- add_dir= +- add= +- lib_linked=yes +- case $hardcode_action in +- immediate | unsupported) +- if test "$hardcode_direct" = no; then +- add="$dir/$linklib" +- case $host in +- *-*-sco3.2v5* ) add_dir="-L$dir" ;; +- *-*-darwin* ) +- # if the lib is a module then we can not link against +- # it, someone is ignoring the new warnings I added +- if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then +- $echo "** Warning, lib $linklib is a module, not a shared library" +- if test -z "$old_library" ; then +- $echo +- $echo "** And there doesn't seem to be a static archive available" +- $echo "** The link will probably fail, sorry" +- else +- add="$dir/$old_library" +- fi +- fi +- esac +- elif test "$hardcode_minus_L" = no; then +- case $host in +- *-*-sunos*) add_shlibpath="$dir" ;; +- esac +- add_dir="-L$dir" +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = no; then +- add_shlibpath="$dir" +- add="-l$name" +- else +- lib_linked=no +- fi +- ;; +- relink) +- if test "$hardcode_direct" = yes; then +- add="$dir/$linklib" +- elif test "$hardcode_minus_L" = yes; then +- add_dir="-L$dir" +- # Try looking first in the location we're being installed to. +- if test -n "$inst_prefix_dir"; then +- case "$libdir" in +- [\\/]*) +- add_dir="$add_dir -L$inst_prefix_dir$libdir" +- ;; +- esac +- fi +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = yes; then +- add_shlibpath="$dir" +- add="-l$name" +- else +- lib_linked=no +- fi +- ;; +- *) lib_linked=no ;; +- esac ++# func_mode_execute arg... ++func_mode_execute () ++{ ++ $opt_debug ++ # The first argument is the command name. ++ cmd="$nonopt" ++ test -z "$cmd" && \ ++ func_fatal_help "you must specify a COMMAND" + +- if test "$lib_linked" != yes; then +- $echo "$modename: configuration error: unsupported hardcode properties" +- exit $EXIT_FAILURE +- fi ++ # Handle -dlopen flags immediately. ++ for file in $execute_dlfiles; do ++ test -f "$file" \ ++ || func_fatal_help "\`$file' is not a file" + +- if test -n "$add_shlibpath"; then +- case :$compile_shlibpath: in +- *":$add_shlibpath:"*) ;; +- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; +- esac +- fi +- if test "$linkmode" = prog; then +- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" +- test -n "$add" && compile_deplibs="$add $compile_deplibs" +- else +- test -n "$add_dir" && deplibs="$add_dir $deplibs" +- test -n "$add" && deplibs="$add $deplibs" +- if test "$hardcode_direct" != yes && \ +- test "$hardcode_minus_L" != yes && \ +- test "$hardcode_shlibpath_var" = yes; then +- case :$finalize_shlibpath: in +- *":$libdir:"*) ;; +- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; +- esac +- fi +- fi +- fi ++ dir= ++ case $file in ++ *.la) ++ # Check to see that this really is a libtool archive. ++ func_lalib_unsafe_p "$file" \ ++ || func_fatal_help "\`$lib' is not a valid libtool archive" + +- if test "$linkmode" = prog || test "$mode" = relink; then +- add_shlibpath= +- add_dir= +- add= +- # Finalize command for both is simple: just hardcode it. +- if test "$hardcode_direct" = yes; then +- add="$libdir/$linklib" +- elif test "$hardcode_minus_L" = yes; then +- add_dir="-L$libdir" +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = yes; then +- case :$finalize_shlibpath: in +- *":$libdir:"*) ;; +- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; +- esac +- add="-l$name" +- elif test "$hardcode_automatic" = yes; then +- if test -n "$inst_prefix_dir" && +- test -f "$inst_prefix_dir$libdir/$linklib" ; then +- add="$inst_prefix_dir$libdir/$linklib" +- else +- add="$libdir/$linklib" +- fi +- else +- # We cannot seem to hardcode it, guess we'll fake it. +- add_dir="-L$libdir" +- # Try looking first in the location we're being installed to. +- if test -n "$inst_prefix_dir"; then +- case "$libdir" in +- [\\/]*) +- add_dir="$add_dir -L$inst_prefix_dir$libdir" +- ;; +- esac +- fi +- add="-l$name" +- fi ++ # Read the libtool library. ++ dlname= ++ library_names= ++ func_source "$file" + +- if test "$linkmode" = prog; then +- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" +- test -n "$add" && finalize_deplibs="$add $finalize_deplibs" +- else +- test -n "$add_dir" && deplibs="$add_dir $deplibs" +- test -n "$add" && deplibs="$add $deplibs" +- fi +- fi +- elif test "$linkmode" = prog; then +- # Here we assume that one of hardcode_direct or hardcode_minus_L +- # is not unsupported. This is valid on all known static and +- # shared platforms. +- if test "$hardcode_direct" != unsupported; then +- test -n "$old_library" && linklib="$old_library" +- compile_deplibs="$dir/$linklib $compile_deplibs" +- finalize_deplibs="$dir/$linklib $finalize_deplibs" - else -- # We have old collect2 -- hardcode_direct_GCJ=unsupported -- # It fails to find uninstalled libraries when the uninstalled -- # path is not listed in the libpath. Setting hardcode_minus_L -- # to unsupported forces relinking -- hardcode_minus_L_GCJ=yes -- hardcode_libdir_flag_spec_GCJ='-L$libdir' -- hardcode_libdir_separator_GCJ= +- compile_deplibs="-l$name -L$dir $compile_deplibs" +- finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi -- esac -- shared_flag='-shared' -- else -- # not using gcc -- if test "$host_cpu" = ia64; then -- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release -- # chokes on -Wl,-G. The following line is correct: -- shared_flag='-G' -- else -- if test "$aix_use_runtimelinking" = yes; then -- shared_flag='${wl}-G' +- elif test "$build_libtool_libs" = yes; then +- # Not a shared library +- if test "$deplibs_check_method" != pass_all; then +- # We're trying link a shared library against a static one +- # but the system doesn't support it. ++ # Skip this library if it cannot be dlopened. ++ if test -z "$dlname"; then ++ # Warn if it was a shared library. ++ test -n "$library_names" && \ ++ func_warning "\`$file' was not linked with \`-export-dynamic'" ++ continue ++ fi + +- # Just print a warning and add the library to dependency_libs so +- # that the program can be linked against the static library. +- $echo +- $echo "*** Warning: This system can not link to static lib archive $lib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have." +- if test "$module" = yes; then +- $echo "*** But as you try to build a module library, libtool will still create " +- $echo "*** a static module, that should work as long as the dlopening application" +- $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." +- if test -z "$global_symbol_pipe"; then +- $echo +- $echo "*** However, this would only work if libtool was able to extract symbol" +- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- $echo "*** not find such a program. So, this module is probably useless." +- $echo "*** \`nm' from GNU binutils and a full rebuild may help." +- fi +- if test "$build_old_libs" = no; then +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no +- fi +- fi - else -- shared_flag='${wl}-bM:SRE' -- fi -- fi -- fi -- -- # It seems that -bexpall does not export symbols beginning with -- # underscore (_), so it is better to generate a list of symbols to export. -- always_export_symbols_GCJ=yes -- if test "$aix_use_runtimelinking" = yes; then -- # Warning - without using the other runtime loading flags (-brtl), -- # -berok will link without error, but may produce a broken library. -- allow_undefined_flag_GCJ='-berok' -- # Determine the default libpath from the value encoded in an empty executable. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ -- --int --main () --{ -- -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'`; fi --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -- -- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" -- archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" -- else -- if test "$host_cpu" = ia64; then -- hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' -- allow_undefined_flag_GCJ="-z nodefs" -- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" -- else -- # Determine the default libpath from the value encoded in an empty executable. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ -- --int --main () --{ -- -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- --aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'` --# Check for a 64-bit object if we didn't find anything. --if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } --}'`; fi --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -- -- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" -- # Warning - without using the other run time loading flags, -- # -berok will link without error, but may produce a broken library. -- no_undefined_flag_GCJ=' ${wl}-bernotok' -- allow_undefined_flag_GCJ=' ${wl}-berok' -- # -bexpall does not export symbols beginning with underscore (_) -- always_export_symbols_GCJ=yes -- # Exported symbols can be pulled into shared objects from archives -- whole_archive_flag_spec_GCJ=' ' -- archive_cmds_need_lc_GCJ=yes -- # This is similar to how AIX traditionally builds it's shared libraries. -- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -- fi -- fi -- ;; -- -- amigaos*) -- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -- hardcode_libdir_flag_spec_GCJ='-L$libdir' -- hardcode_minus_L_GCJ=yes -- # see comment about different semantics on the GNU ld section -- ld_shlibs_GCJ=no -- ;; -- -- bsdi4*) -- export_dynamic_flag_spec_GCJ=-rdynamic -- ;; -- -- cygwin* | mingw* | pw32*) -- # When not using gcc, we currently assume that we are using -- # Microsoft Visual C++. -- # hardcode_libdir_flag_spec is actually meaningless, as there is -- # no search path for DLLs. -- hardcode_libdir_flag_spec_GCJ=' ' -- allow_undefined_flag_GCJ=unsupported -- # Tell ltmain to make .lib files, not .a files. -- libext=lib -- # Tell ltmain to make .dll files, not .so files. -- shrext_cmds=".dll" -- # FIXME: Setting linknames here is a bad hack. -- archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' -- # The linker will automatically build a .lib file if we build a DLL. -- old_archive_From_new_cmds_GCJ='true' -- # FIXME: Should let the user specify the lib program. -- old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' -- fix_srcfile_path='`cygpath -w "$srcfile"`' -- enable_shared_with_static_runtimes_GCJ=yes -- ;; -- -- darwin* | rhapsody*) -- if test "$GXX" = yes ; then -- archive_cmds_need_lc_GCJ=no -- case "$host_os" in -- rhapsody* | darwin1.[012]) -- allow_undefined_flag_GCJ='-undefined suppress' -- ;; -- *) # Darwin 1.3 on -- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then -- allow_undefined_flag_GCJ='-flat_namespace -undefined suppress' -- else -- case ${MACOSX_DEPLOYMENT_TARGET} in -- 10.[012]) -- allow_undefined_flag_GCJ='-flat_namespace -undefined suppress' -- ;; -- 10.*) -- allow_undefined_flag_GCJ='-undefined dynamic_lookup' -- ;; -- esac +- convenience="$convenience $dir/$old_library" +- old_convenience="$old_convenience $dir/$old_library" +- deplibs="$dir/$old_library $deplibs" +- link_static=yes +- fi +- fi # link shared/static library? ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" + +- if test "$linkmode" = lib; then +- if test -n "$dependency_libs" && +- { test "$hardcode_into_libs" != yes || +- test "$build_old_libs" = yes || +- test "$link_static" = yes; }; then +- # Extract -R from dependency_libs +- temp_deplibs= +- for libdir in $dependency_libs; do +- case $libdir in +- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` +- case " $xrpath " in +- *" $temp_xrpath "*) ;; +- *) xrpath="$xrpath $temp_xrpath";; +- esac;; +- *) temp_deplibs="$temp_deplibs $libdir";; +- esac +- done +- dependency_libs="$temp_deplibs" ++ if test -f "$dir/$objdir/$dlname"; then ++ dir="$dir/$objdir" ++ else ++ if test ! -f "$dir/$dlname"; then ++ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi ++ fi ++ ;; + +- newlib_search_path="$newlib_search_path $absdir" +- # Link against this library +- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" +- # ... and its dependency_libs +- tmp_libs= +- for deplib in $dependency_libs; do +- newdependency_libs="$deplib $newdependency_libs" +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- tmp_libs="$tmp_libs $deplib" +- done ++ *.lo) ++ # Just add the directory containing the .lo file. ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" ++ ;; + +- if test "$link_all_deplibs" != no; then +- # Add the search paths of all dependency libraries +- for deplib in $dependency_libs; do +- case $deplib in +- -L*) path="$deplib" ;; +- *.la) +- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$deplib" && dir="." +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; +- *) +- absdir=`cd "$dir" && pwd` +- if test -z "$absdir"; then +- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 +- absdir="$dir" +- fi +- ;; +- esac +- if grep "^installed=no" $deplib > /dev/null; then +- path="$absdir/$objdir" +- else +- eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` +- if test -z "$libdir"; then +- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE +- fi +- if test "$absdir" != "$libdir"; then +- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 +- fi +- path="$absdir" +- fi +- depdepl= +- case $host in +- *-*-darwin*) +- # we do not want to link against static libs, +- # but need to link against shared +- eval deplibrary_names=`${SED} -n -e 's/^library_names=$.*$$/\1/p' $deplib` +- if test -n "$deplibrary_names" ; then +- for tmp in $deplibrary_names ; do +- depdepl=$tmp +- done +- if test -f "$path/$depdepl" ; then +- depdepl="$path/$depdepl" +- fi +- # do not add paths which are already there +- case " $newlib_search_path " in +- *" $path "*) ;; +- *) newlib_search_path="$newlib_search_path $path";; +- esac +- fi +- path="" +- ;; +- *) +- path="-L$path" +- ;; +- esac +- ;; +- -l*) +- case $host in +- *-*-darwin*) +- # Again, we only want to link against shared libraries +- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` +- for tmp in $newlib_search_path ; do +- if test -f "$tmp/lib$tmp_libs.dylib" ; then +- eval depdepl="$tmp/lib$tmp_libs.dylib" +- break +- fi +- done +- path="" +- ;; +- *) continue ;; +- esac +- ;; +- *) continue ;; +- esac +- case " $deplibs " in +- *" $depdepl "*) ;; +- *) deplibs="$depdepl $deplibs" ;; +- esac +- case " $deplibs " in +- *" $path "*) ;; +- *) deplibs="$deplibs $path" ;; +- esac +- done +- fi # link_all_deplibs != no +- fi # linkmode = lib +- done # for deplib in $libs +- dependency_libs="$newdependency_libs" +- if test "$pass" = dlpreopen; then +- # Link the dlpreopened libraries before other libraries +- for deplib in $save_deplibs; do +- deplibs="$deplib $deplibs" +- done - fi -- ;; -- esac -- lt_int_apple_cc_single_mod=no -- output_verbose_link_cmd='echo' -- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then -- lt_int_apple_cc_single_mod=yes -- fi -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- archive_cmds_GCJ='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' -- else -- archive_cmds_GCJ='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- if test "$pass" != dlopen; then +- if test "$pass" != conv; then +- # Make sure lib_search_path contains only unique directories. +- lib_search_path= +- for dir in $newlib_search_path; do +- case "$lib_search_path " in +- *" $dir "*) ;; +- *) lib_search_path="$lib_search_path $dir" ;; +- esac +- done +- newlib_search_path= +- fi +- +- if test "$linkmode,$pass" != "prog,link"; then +- vars="deplibs" +- else +- vars="compile_deplibs finalize_deplibs" +- fi +- for var in $vars dependency_libs; do +- # Add libraries to $var in reverse order +- eval tmp_libs=\"\$$var\" +- new_libs= +- for deplib in $tmp_libs; do +- # FIXME: Pedantically, this is the right thing to do, so +- # that some nasty dependency loop isn't accidentally +- # broken: +- #new_libs="$deplib $new_libs" +- # Pragmatically, this seems to cause very few problems in +- # practice: +- case $deplib in +- -L*) new_libs="$deplib $new_libs" ;; +- -R*) ;; +- *) +- # And here is the reason: when a library appears more +- # than once as an explicit dependence of a library, or +- # is implicitly linked in more than once by the +- # compiler, it is considered special, and multiple +- # occurrences thereof are not removed. Compare this +- # with having the same library being listed as a +- # dependency of multiple other libraries: in this case, +- # we know (pedantically, we assume) the library does not +- # need to be listed more than once, so we keep only the +- # last copy. This is not always right, but it is rare +- # enough that we require users that really mean to play +- # such unportable linking tricks to link the library +- # using -Wl,-lname, so that libtool does not consider it +- # for duplicate removal. +- case " $specialdeplibs " in +- *" $deplib "*) new_libs="$deplib $new_libs" ;; +- *) +- case " $new_libs " in +- *" $deplib "*) ;; +- *) new_libs="$deplib $new_libs" ;; +- esac +- ;; +- esac +- ;; +- esac +- done +- tmp_libs= +- for deplib in $new_libs; do +- case $deplib in +- -L*) +- case " $tmp_libs " in +- *" $deplib "*) ;; +- *) tmp_libs="$tmp_libs $deplib" ;; +- esac +- ;; +- *) tmp_libs="$tmp_libs $deplib" ;; +- esac +- done +- eval $var=\"$tmp_libs\" +- done # for var - fi -- module_cmds_GCJ='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' -- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's -- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then -- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- else -- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- fi -- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' -- hardcode_direct_GCJ=no -- hardcode_automatic_GCJ=yes -- hardcode_shlibpath_var_GCJ=unsupported -- whole_archive_flag_spec_GCJ='-all_load $convenience' -- link_all_deplibs_GCJ=yes -- else -- ld_shlibs_GCJ=no +- # Last step: remove runtime libs from dependency_libs +- # (they stay in deplibs) +- tmp_libs= +- for i in $dependency_libs ; do +- case " $predeps $postdeps $compiler_lib_search_path " in +- *" $i "*) +- i="" +- ;; +- esac +- if test -n "$i" ; then +- tmp_libs="$tmp_libs $i" +- fi +- done +- dependency_libs=$tmp_libs +- done # for pass +- if test "$linkmode" = prog; then +- dlfiles="$newdlfiles" +- dlprefiles="$newdlprefiles" - fi -- ;; -- -- dgux*) -- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_libdir_flag_spec_GCJ='-L$libdir' -- hardcode_shlibpath_var_GCJ=no -- ;; -- -- freebsd1*) -- ld_shlibs_GCJ=no -- ;; - -- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor -- # support. Future versions do this automatically, but an explicit c++rt0.o -- # does not break anything, and helps significantly (at the cost of a little -- # extra space). -- freebsd2.2*) -- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' -- hardcode_libdir_flag_spec_GCJ='-R$libdir' -- hardcode_direct_GCJ=yes -- hardcode_shlibpath_var_GCJ=no -- ;; +- case $linkmode in +- oldlib) +- if test -n "$deplibs"; then +- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 +- fi - -- # Unfortunately, older versions of FreeBSD 2 do not have this feature. -- freebsd2*) -- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct_GCJ=yes -- hardcode_minus_L_GCJ=yes -- hardcode_shlibpath_var_GCJ=no -- ;; +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 +- fi - -- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. -- freebsd* | kfreebsd*-gnu) -- archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' -- hardcode_libdir_flag_spec_GCJ='-R$libdir' -- hardcode_direct_GCJ=yes -- hardcode_shlibpath_var_GCJ=no -- ;; +- if test -n "$rpath"; then +- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 +- fi - -- hpux9*) -- if test "$GCC" = yes; then -- archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -- else -- archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- if test -n "$xrpath"; then +- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi -- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' -- hardcode_libdir_separator_GCJ=: -- hardcode_direct_GCJ=yes - -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- hardcode_minus_L_GCJ=yes -- export_dynamic_flag_spec_GCJ='${wl}-E' +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 +- fi ++ *) ++ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" ++ continue ++ ;; ++ esac + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 +- fi ++ # Get the absolute pathname. ++ absdir=`cd "$dir" && pwd` ++ test -n "$absdir" && dir="$absdir" + +- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then +- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 ++ # Now add the directory to shlibpath_var. ++ if eval "test -z \"\$$shlibpath_var\""; then ++ eval "$shlibpath_var=\"\$dir\"" ++ else ++ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi ++ done + +- # Now set the variables for building old libraries. +- build_libtool_libs=no +- oldlibs="$output" +- objs="$objs$old_deplibs" - ;; ++ # This variable tells wrapper scripts just to set shlibpath_var ++ # rather than running their programs. ++ libtool_execute_magic="$magic" + +- lib) +- # Make sure we only generate libraries of the form `libNAME.la'. +- case $outputname in +- lib*) +- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` +- eval shared_ext=\"$shrext_cmds\" +- eval libname=\"$libname_spec\" +- ;; ++ # Check if any of the arguments is a wrapper script. ++ args= ++ for file ++ do ++ case $file in ++ -*) ;; + *) +- if test "$module" = no; then +- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi +- if test "$need_lib_prefix" != no; then +- # Add the "lib" prefix for modules if required +- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` +- eval shared_ext=\"$shrext_cmds\" +- eval libname=\"$libname_spec\" +- else +- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` ++ # Do a test to see if this is really a libtool program. ++ if func_ltwrapper_script_p "$file"; then ++ func_source "$file" ++ # Transform arg to wrapped name. ++ file="$progdir/$program" ++ elif func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ func_source "$func_ltwrapper_scriptname_result" ++ # Transform arg to wrapped name. ++ file="$progdir/$program" + fi + ;; + esac ++ # Quote arguments (to preserve shell metacharacters). ++ func_quote_for_eval "$file" ++ args="$args $func_quote_for_eval_result" ++ done + +- if test -n "$objs"; then +- if test "$deplibs_check_method" != pass_all; then +- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 +- exit $EXIT_FAILURE +- else +- $echo +- $echo "*** Warning: Linking the shared library $output against the non-libtool" +- $echo "*** objects $objs is not portable!" +- libobjs="$libobjs $objs" +- fi ++ if test "X$opt_dry_run" = Xfalse; then ++ if test -n "$shlibpath_var"; then ++ # Export the shlibpath_var. ++ eval "export $shlibpath_var" + fi + +- if test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 +- fi ++ # Restore saved environment variables ++ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES ++ do ++ eval "if test \"\${save_$lt_var+set}\" = set; then ++ $lt_var=\$save_$lt_var; export $lt_var ++ else ++ $lt_unset $lt_var ++ fi" ++ done + +- set dummy $rpath +- if test "$#" -gt 2; then +- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 ++ # Now prepare to actually exec the command. ++ exec_cmd="\$cmd$args" ++ else ++ # Display what would be done. ++ if test -n "$shlibpath_var"; then ++ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" ++ $ECHO "export $shlibpath_var" + fi +- install_libdir="$2" ++ $ECHO "$cmd$args" ++ exit $EXIT_SUCCESS ++ fi ++} + +- oldlibs= +- if test -z "$rpath"; then +- if test "$build_libtool_libs" = yes; then +- # Building a libtool convenience library. +- # Some compilers have problems with a `.al' extension so +- # convenience libraries should have the same extension an +- # archive normally would. +- oldlibs="$output_objdir/$libname.$libext $oldlibs" +- build_libtool_libs=convenience +- build_old_libs=yes +- fi ++test "$mode" = execute && func_mode_execute ${1+"$@"} + +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 +- fi + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 +- fi +- else ++# func_mode_finish arg... ++func_mode_finish () ++{ ++ $opt_debug ++ libdirs="$nonopt" ++ admincmds= + +- # Parse the version information argument. +- save_ifs="$IFS"; IFS=':' +- set dummy $vinfo 0 0 0 +- IFS="$save_ifs" ++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then ++ for dir ++ do ++ libdirs="$libdirs $dir" ++ done + +- if test -n "$8"; then +- $echo "$modename: too many parameters to \`-version-info'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ for libdir in $libdirs; do ++ if test -n "$finish_cmds"; then ++ # Do each command in the finish commands. ++ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds ++'"$cmd"'"' ++ fi ++ if test -n "$finish_eval"; then ++ # Do the single finish_eval. ++ eval cmds=\"$finish_eval\" ++ $opt_dry_run || eval "$cmds" || admincmds="$admincmds ++ $cmds" + fi ++ done ++ fi + +- # convert absolute version numbers to libtool ages +- # this retains compatibility with .la files and attempts +- # to make the code below a bit more comprehensible ++ # Exit here if they wanted silent mode. ++ $opt_silent && exit $EXIT_SUCCESS + +- case $vinfo_number in +- yes) +- number_major="$2" +- number_minor="$3" +- number_revision="$4" +- # +- # There are really only two kinds -- those that +- # use the current revision as the major version +- # and those that subtract age and use age as +- # a minor version. But, then there is irix +- # which has an extra 1 added just for fun +- # +- case $version_type in +- darwin|linux|osf|windows) +- current=`expr $number_major + $number_minor` +- age="$number_minor" +- revision="$number_revision" +- ;; +- freebsd-aout|freebsd-elf|sunos) +- current="$number_major" +- revision="$number_minor" +- age="0" +- ;; +- irix|nonstopux) +- current=`expr $number_major + $number_minor - 1` +- age="$number_minor" +- revision="$number_minor" +- ;; +- esac +- ;; +- no) +- current="$2" +- revision="$3" +- age="$4" +- ;; +- esac - -- hpux10* | hpux11*) -- if test "$GCC" = yes -a "$with_gnu_ld" = no; then -- case "$host_cpu" in -- hppa*64*|ia64*) -- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- # Check that each of the things are valid numbers. +- case $current in +- [0-9]*) ;; +- *) +- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++ $ECHO "X----------------------------------------------------------------------" | $Xsed ++ $ECHO "Libraries have been installed in:" ++ for libdir in $libdirs; do ++ $ECHO " $libdir" ++ done ++ $ECHO ++ $ECHO "If you ever happen to want to link against installed libraries" ++ $ECHO "in a given directory, LIBDIR, you must either use libtool, and" ++ $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" ++ $ECHO "flag during linking and do at least one of the following:" ++ if test -n "$shlibpath_var"; then ++ $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" ++ $ECHO " during execution" ++ fi ++ if test -n "$runpath_var"; then ++ $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" ++ $ECHO " during linking" ++ fi ++ if test -n "$hardcode_libdir_flag_spec"; then ++ libdir=LIBDIR ++ eval flag=\"$hardcode_libdir_flag_spec\" + +- case $revision in +- [0-9]*) ;; +- *) +- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++ $ECHO " - use the \`$flag' linker flag" ++ fi ++ if test -n "$admincmds"; then ++ $ECHO " - have your system administrator run these commands:$admincmds" ++ fi ++ if test -f /etc/ld.so.conf; then ++ $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" ++ fi ++ $ECHO + +- case $age in +- [0-9]*) ;; +- *) +- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++ $ECHO "See any operating system documentation about shared libraries for" ++ case $host in ++ solaris2.[6789]|solaris2.1[0-9]) ++ $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" ++ $ECHO "pages." ++ ;; ++ *) ++ $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." ++ ;; ++ esac ++ $ECHO "X----------------------------------------------------------------------" | $Xsed ++ exit $EXIT_SUCCESS ++} + +- if test "$age" -gt "$current"; then +- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- fi ++test "$mode" = finish && func_mode_finish ${1+"$@"} + +- # Calculate the version variables. +- major= +- versuffix= +- verstring= +- case $version_type in +- none) ;; + +- darwin) +- # Like Linux, but with the current version available in +- # verstring for coding it into the library header +- major=.`expr $current - $age` +- versuffix="$major.$age.$revision" +- # Darwin ld doesn't like 0 for these options... +- minor_current=`expr $current + 1` +- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; -- *) -- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++# func_mode_install arg... ++func_mode_install () ++{ ++ $opt_debug ++ # There may be an optional sh(1) argument at the beginning of ++ # install_prog (especially on Windows NT). ++ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || ++ # Allow the use of GNU shtool's install command. ++ $ECHO "X$nonopt" | $GREP shtool >/dev/null; then ++ # Aesthetically quote it. ++ func_quote_for_eval "$nonopt" ++ install_prog="$func_quote_for_eval_result " ++ arg=$1 ++ shift ++ else ++ install_prog= ++ arg=$nonopt ++ fi + +- freebsd-aout) +- major=".$current" +- versuffix=".$current.$revision"; - ;; -- esac -- else -- case "$host_cpu" in -- hppa*64*|ia64*) -- archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ++ # The real first argument should be the name of the installation program. ++ # Aesthetically quote it. ++ func_quote_for_eval "$arg" ++ install_prog="$install_prog$func_quote_for_eval_result" + +- freebsd-elf) +- major=".$current" +- versuffix=".$current"; - ;; -- *) -- archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ # We need to accept at least all the BSD install flags. ++ dest= ++ files= ++ opts= ++ prev= ++ install_type= ++ isdir=no ++ stripme= ++ for arg ++ do ++ if test -n "$dest"; then ++ files="$files $dest" ++ dest=$arg ++ continue ++ fi + +- irix | nonstopux) +- major=`expr $current - $age + 1` ++ case $arg in ++ -d) isdir=yes ;; ++ -f) ++ case " $install_prog " in ++ *[\\\ /]cp\ *) ;; ++ *) prev=$arg ;; ++ esac ++ ;; ++ -g | -m | -o) ++ prev=$arg ++ ;; ++ -s) ++ stripme=" -s" ++ continue ++ ;; ++ -*) ++ ;; ++ *) ++ # If the previous option needed an argument, then skip it. ++ if test -n "$prev"; then ++ prev= ++ else ++ dest=$arg ++ continue ++ fi ++ ;; ++ esac + +- case $version_type in +- nonstopux) verstring_prefix=nonstopux ;; +- *) verstring_prefix=sgi ;; +- esac +- verstring="$verstring_prefix$major.$revision" ++ # Aesthetically quote the argument. ++ func_quote_for_eval "$arg" ++ install_prog="$install_prog $func_quote_for_eval_result" ++ done + +- # Add in all the interfaces that we are compatible with. +- loop=$revision +- while test "$loop" -ne 0; do +- iface=`expr $revision - $loop` +- loop=`expr $loop - 1` +- verstring="$verstring_prefix$major.$iface:$verstring" +- done ++ test -z "$install_prog" && \ ++ func_fatal_help "you must specify an install program" + +- # Before this point, $major must not contain `.'. +- major=.$major +- versuffix="$major.$revision" - ;; -- esac -- fi -- if test "$with_gnu_ld" = no; then -- case "$host_cpu" in -- hppa*64*) -- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' -- hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' -- hardcode_libdir_separator_GCJ=: -- hardcode_direct_GCJ=no -- hardcode_shlibpath_var_GCJ=no ++ test -n "$prev" && \ ++ func_fatal_help "the \`$prev' option requires an argument" + +- linux) +- major=.`expr $current - $age` +- versuffix="$major.$age.$revision" - ;; -- ia64*) -- hardcode_libdir_flag_spec_GCJ='-L$libdir' -- hardcode_direct_GCJ=no -- hardcode_shlibpath_var_GCJ=no -- -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- hardcode_minus_L_GCJ=yes ++ if test -z "$files"; then ++ if test -z "$dest"; then ++ func_fatal_help "no file or destination specified" ++ else ++ func_fatal_help "you must specify a destination" ++ fi ++ fi + +- osf) +- major=.`expr $current - $age` +- versuffix=".$current.$age.$revision" +- verstring="$current.$age.$revision" ++ # Strip any trailing slash from the destination. ++ func_stripname '' '/' "$dest" ++ dest=$func_stripname_result + +- # Add in all the interfaces that we are compatible with. +- loop=$age +- while test "$loop" -ne 0; do +- iface=`expr $current - $loop` +- loop=`expr $loop - 1` +- verstring="$verstring:${iface}.0" +- done ++ # Check to see that the destination is a directory. ++ test -d "$dest" && isdir=yes ++ if test "$isdir" = yes; then ++ destdir="$dest" ++ destname= ++ else ++ func_dirname_and_basename "$dest" "" "." ++ destdir="$func_dirname_result" ++ destname="$func_basename_result" + +- # Make executables depend on our current version. +- verstring="$verstring:${current}.0" ++ # Not a directory, so check to see that there is only one file specified. ++ set dummy $files; shift ++ test "$#" -gt 1 && \ ++ func_fatal_help "\`$dest' is not a directory" ++ fi ++ case $destdir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ for file in $files; do ++ case $file in ++ *.lo) ;; ++ *) ++ func_fatal_help "\`$destdir' must be an absolute directory name" + ;; ++ esac ++ done ++ ;; ++ esac + +- sunos) +- major=".$current" +- versuffix=".$current.$revision" - ;; ++ # This variable tells wrapper scripts just to set variables rather ++ # than running their programs. ++ libtool_install_magic="$magic" + +- windows) +- # Use '-' rather than '.', since we only want one +- # extension on DOS 8.3 filesystems. +- major=`expr $current - $age` +- versuffix="-$major" +- ;; ++ staticlibs= ++ future_libdirs= ++ current_libdirs= ++ for file in $files; do + - *) -- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' -- hardcode_libdir_separator_GCJ=: -- hardcode_direct_GCJ=yes -- export_dynamic_flag_spec_GCJ='${wl}-E' -- -- # hardcode_minus_L: Not really in the search PATH, -- # but as the default location of the library. -- hardcode_minus_L_GCJ=yes +- $echo "$modename: unknown library version type \`$version_type'" 1>&2 +- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit $EXIT_FAILURE - ;; - esac ++ # Do each installation. ++ case $file in ++ *.$libext) ++ # Do the static libraries later. ++ staticlibs="$staticlibs $file" ++ ;; + +- # Clear the version info if we defaulted, and they specified a release. +- if test -z "$vinfo" && test -n "$release"; then +- major= +- case $version_type in +- darwin) +- # we can't check for "0.0" in archive_cmds due to quoting +- # problems, so we reset it completely +- verstring= +- ;; +- *) +- verstring="0.0" +- ;; ++ *.la) ++ # Check to see that this really is a libtool archive. ++ func_lalib_unsafe_p "$file" \ ++ || func_fatal_help "\`$file' is not a valid libtool archive" ++ ++ library_names= ++ old_library= ++ relink_command= ++ func_source "$file" ++ ++ # Add the libdir to current_libdirs if it is the destination. ++ if test "X$destdir" = "X$libdir"; then ++ case "$current_libdirs " in ++ *" $libdir "*) ;; ++ *) current_libdirs="$current_libdirs $libdir" ;; ++ esac ++ else ++ # Note the libdir as a future libdir. ++ case "$future_libdirs " in ++ *" $libdir "*) ;; ++ *) future_libdirs="$future_libdirs $libdir" ;; + esac +- if test "$need_version" = no; then +- versuffix= +- else +- versuffix=".0.0" +- fi + fi + +- # Remove version info from name if versioning should be avoided +- if test "$avoid_version" = yes && test "$need_version" = no; then +- major= +- versuffix= +- verstring="" +- fi ++ func_dirname "$file" "/" "" ++ dir="$func_dirname_result" ++ dir="$dir$objdir" + +- # Check to see if the archive will have undefined symbols. +- if test "$allow_undefined" = yes; then +- if test "$allow_undefined_flag" = unsupported; then +- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 +- build_libtool_libs=no +- build_old_libs=yes ++ if test -n "$relink_command"; then ++ # Determine the prefix the user has applied to our future dir. ++ inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` ++ ++ # Don't allow the user to place us outside of our expected ++ # location b/c this prevents finding dependent libraries that ++ # are installed to the same prefix. ++ # At present, this check doesn't affect windows .dll's that ++ # are installed into $libdir/../bin (currently, that works fine) ++ # but it's something to keep an eye on. ++ test "$inst_prefix_dir" = "$destdir" && \ ++ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" ++ ++ if test -n "$inst_prefix_dir"; then ++ # Stick the inst_prefix_dir data into the link command. ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` ++ else ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` + fi +- else +- # Don't allow undefined symbols. +- allow_undefined_flag="$no_undefined_flag" ++ ++ func_warning "relinking \`$file'" ++ func_show_eval "$relink_command" \ ++ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi - fi -- ;; -- -- irix5* | irix6* | nonstopux*) -- if test "$GCC" = yes; then -- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- else -- archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' -- fi -- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator_GCJ=: -- link_all_deplibs_GCJ=yes -- ;; -- -- netbsd*) -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out -- else -- archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF -- fi -- hardcode_libdir_flag_spec_GCJ='-R$libdir' -- hardcode_direct_GCJ=yes -- hardcode_shlibpath_var_GCJ=no -- ;; -- -- newsos6) -- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct_GCJ=yes -- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator_GCJ=: -- hardcode_shlibpath_var_GCJ=no -- ;; -- -- openbsd*) -- hardcode_direct_GCJ=yes -- hardcode_shlibpath_var_GCJ=no -- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' -- export_dynamic_flag_spec_GCJ='${wl}-E' -- else -- case $host_os in -- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) -- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -- hardcode_libdir_flag_spec_GCJ='-R$libdir' -- ;; -- *) -- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' -- ;; -- esac -- fi -- ;; -- -- os2*) -- hardcode_libdir_flag_spec_GCJ='-L$libdir' -- hardcode_minus_L_GCJ=yes -- allow_undefined_flag_GCJ=unsupported -- archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' -- old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' -- ;; -- -- osf3*) -- if test "$GCC" = yes; then -- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- else -- allow_undefined_flag_GCJ=' -expect_unresolved \*' -- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- fi -- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' -- hardcode_libdir_separator_GCJ=: -- ;; -- -- osf4* | osf5*) # as osf3* with the addition of -msym flag -- if test "$GCC" = yes; then -- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' -- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' -- else -- allow_undefined_flag_GCJ=' -expect_unresolved \*' -- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' -- archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ -- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' -- -- # Both c and cxx compiler support -rpath directly -- hardcode_libdir_flag_spec_GCJ='-rpath $libdir' -- fi -- hardcode_libdir_separator_GCJ=: -- ;; -- -- sco3.2v5*) -- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_shlibpath_var_GCJ=no -- export_dynamic_flag_spec_GCJ='${wl}-Bexport' -- runpath_var=LD_RUN_PATH -- hardcode_runpath_var=yes -- ;; -- -- solaris*) -- no_undefined_flag_GCJ=' -z text' -- if test "$GCC" = yes; then -- archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' -- else -- archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' -- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' -- fi -- hardcode_libdir_flag_spec_GCJ='-R$libdir' -- hardcode_shlibpath_var_GCJ=no -- case $host_os in -- solaris2.[0-5] | solaris2.[0-5].*) ;; -- *) # Supported since Solaris 2.6 (maybe 2.5.1?) -- whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; -- esac -- link_all_deplibs_GCJ=yes -- ;; -- -- sunos4*) -- if test "x$host_vendor" = xsequent; then -- # Use $CC to link under sequent, because it throws in some extra .o -- # files that make .init and .fini sections work. -- archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' -- else -- archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' -- fi -- hardcode_libdir_flag_spec_GCJ='-L$libdir' -- hardcode_direct_GCJ=yes -- hardcode_minus_L_GCJ=yes -- hardcode_shlibpath_var_GCJ=no -- ;; -- -- sysv4) -- case $host_vendor in -- sni) -- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct_GCJ=yes # is this really true??? -- ;; -- siemens) -- ## LD is ld it makes a PLAMLIB -- ## CC just makes a GrossModule. -- archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' -- reload_cmds_GCJ='$CC -r -o $output$reload_objs' -- hardcode_direct_GCJ=no -- ;; -- motorola) -- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie -- ;; -- esac -- runpath_var='LD_RUN_PATH' -- hardcode_shlibpath_var_GCJ=no -- ;; -- -- sysv4.3*) -- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_shlibpath_var_GCJ=no -- export_dynamic_flag_spec_GCJ='-Bexport' -- ;; -- -- sysv4*MP*) -- if test -d /usr/nec; then -- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_shlibpath_var_GCJ=no -- runpath_var=LD_RUN_PATH -- hardcode_runpath_var=yes -- ld_shlibs_GCJ=yes -- fi -- ;; -- -- sysv4.2uw2*) -- archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' -- hardcode_direct_GCJ=yes -- hardcode_minus_L_GCJ=no -- hardcode_shlibpath_var_GCJ=no -- hardcode_runpath_var=yes -- runpath_var=LD_RUN_PATH -- ;; -- -- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) -- no_undefined_flag_GCJ='${wl}-z ${wl}text' -- if test "$GCC" = yes; then -- archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -- else -- archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + +- if test "$mode" != relink; then +- # Remove our outputs, but don't remove object files since they +- # may have been created when compiling PIC objects. +- removelist= +- tempremovelist=`$echo "$output_objdir/*"` +- for p in $tempremovelist; do +- case $p in +- *.$objext) +- ;; +- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) +- if test "X$precious_files_regex" != "X"; then +- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 +- then +- continue +- fi +- fi +- removelist="$removelist $p" +- ;; +- *) ;; ++ # See the names of the shared library. ++ set dummy $library_names; shift ++ if test -n "$1"; then ++ realname="$1" ++ shift ++ ++ srcname="$realname" ++ test -n "$relink_command" && srcname="$realname"T ++ ++ # Install the shared library and build the symlinks. ++ func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ ++ 'exit $?' ++ tstripme="$stripme" ++ case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ case $realname in ++ *.dll.a) ++ tstripme="" ++ ;; ++ esac ++ ;; + esac +- done +- if test -n "$removelist"; then +- $show "${rm}r $removelist" +- $run ${rm}r $removelist ++ if test -n "$tstripme" && test -n "$striplib"; then ++ func_show_eval "$striplib $destdir/$realname" 'exit $?' ++ fi ++ ++ if test "$#" -gt 0; then ++ # Delete the old symlinks, and create new ones. ++ # Try `ln -sf' first, because the `ln' binary might depend on ++ # the symlink we replace! Solaris /bin/ln does not understand -f, ++ # so we also need to try rm && ln -s. ++ for linkname ++ do ++ test "$linkname" != "$realname" \ ++ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" ++ done ++ fi ++ ++ # Do each command in the postinstall commands. ++ lib="$destdir/$realname" ++ func_execute_cmds "$postinstall_cmds" 'exit $?' + fi - fi -- runpath_var='LD_RUN_PATH' -- hardcode_shlibpath_var_GCJ=no -- ;; -- -- sysv5*) -- no_undefined_flag_GCJ=' -z text' -- # $CC -shared without GNU ld will not create a library from C++ -- # object files and a static libstdc++, better avoid it by now -- archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' -- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ -- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' -- hardcode_libdir_flag_spec_GCJ= -- hardcode_shlibpath_var_GCJ=no -- runpath_var='LD_RUN_PATH' -- ;; -- -- uts4*) -- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -- hardcode_libdir_flag_spec_GCJ='-L$libdir' -- hardcode_shlibpath_var_GCJ=no -- ;; -- -- *) -- ld_shlibs_GCJ=no -- ;; -- esac -- fi -- --echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 --echo "${ECHO_T}$ld_shlibs_GCJ" >&6 --test "$ld_shlibs_GCJ" = no && can_build_shared=no -- --variables_saved_for_relink="PATH $shlibpath_var $runpath_var" --if test "$GCC" = yes; then -- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" --fi -- --# --# Do we need to explicitly link libc? --# --case "x$archive_cmds_need_lc_GCJ" in --x|xyes) -- # Assume -lc should be added -- archive_cmds_need_lc_GCJ=yes -- -- if test "$enable_shared" = yes && test "$GCC" = yes; then -- case $archive_cmds_GCJ in -- *'~'*) -- # FIXME: we may have to deal with multi-command sequences. -- ;; -- '$CC '*) -- # Test whether the compiler implicitly links with -lc since on some -- # systems, -lgcc has to come before -lc. If gcc already passes -lc -- # to ld, don't add -lc before -lgcc. -- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 --echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 -- $rm conftest* -- printf "$lt_simple_compile_test_code" > conftest.$ac_ext -- -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } 2>conftest.err; then -- soname=conftest -- lib=conftest -- libobjs=conftest.$ac_objext -- deplibs= -- wl=$lt_prog_compiler_wl_GCJ -- compiler_flags=-v -- linker_flags=-v -- verstring= -- output_objdir=. -- libname=conftest -- lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ -- allow_undefined_flag_GCJ= -- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 -- (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } -- then -- archive_cmds_need_lc_GCJ=no -- else -- archive_cmds_need_lc_GCJ=yes -- fi -- allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag -- else -- cat conftest.err 1>&5 + +- # Now set the variables for building old libraries. +- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then +- oldlibs="$oldlibs $output_objdir/$libname.$libext" ++ # Install the pseudo-library for information purposes. ++ func_basename "$file" ++ name="$func_basename_result" ++ instname="$dir/$name"i ++ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + +- # Transform .lo files to .o files. +- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi -- $rm conftest* -- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 --echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6 -- ;; -- esac -- fi -- ;; --esac -- --echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 --echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 --library_names_spec= --libname_spec='lib$name' --soname_spec= --shrext_cmds=".so" --postinstall_cmds= --postuninstall_cmds= --finish_cmds= --finish_eval= --shlibpath_var= --shlibpath_overrides_runpath=unknown --version_type=none --dynamic_linker="$host_os ld.so" --sys_lib_dlsearch_path_spec="/lib /usr/lib" --if test "$GCC" = yes; then -- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then -- # if the path contains ";" then we assume it to be the separator -- # otherwise default to the standard path separator (i.e. ":") - it is -- # assumed that no part of a normal pathname contains ";" but that should -- # okay in the real world where ";" in dirpaths is itself problematic. -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -- else -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -- fi --else -- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" --fi --need_lib_prefix=unknown --hardcode_into_libs=no -- --# when you set need_version to no, make sure it does not cause -set_version --# flags to be left without arguments --need_version=unknown -- --case $host_os in --aix3*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' -- shlibpath_var=LIBPATH -- -- # AIX 3 has no versioning support, so we append a major version to the name. -- soname_spec='${libname}${release}${shared_ext}$major' -- ;; -- --aix4* | aix5*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- hardcode_into_libs=yes -- if test "$host_cpu" = ia64; then -- # AIX 5 supports IA64 -- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- else -- # With GCC up to 2.95.x, collect2 would create an import file -- # for dependence libraries. The import file would start with -- # the line `#! .'. This would cause the generated library to -- # depend on `.', always an invalid library. This was fixed in -- # development snapshots of GCC prior to 3.0. -- case $host_os in -- aix4 | aix4.[01] | aix4.[01].*) -- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' -- echo ' yes ' -- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then -- : -- else -- can_build_shared=no ++ # Maybe install the static library, too. ++ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ++ ;; + +- # Eliminate all temporary directories. +- for path in $notinst_path; do +- lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` +- deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` +- dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` +- done ++ *.lo) ++ # Install (i.e. copy) a libtool object. + +- if test -n "$xrpath"; then +- # If the user specified any rpath flags, then add them. +- temp_xrpath= +- for libdir in $xrpath; do +- temp_xrpath="$temp_xrpath -R$libdir" +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ;; +- esac +- done +- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then +- dependency_libs="$temp_xrpath $dependency_libs" ++ # Figure out destination file name, if it wasn't already specified. ++ if test -n "$destname"; then ++ destfile="$destdir/$destname" ++ else ++ func_basename "$file" ++ destfile="$func_basename_result" ++ destfile="$destdir/$destfile" + fi - fi -- ;; -- esac -- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct -- # soname into executable. Probably we can add versioning support to -- # collect2, so additional links can be useful in future. -- if test "$aix_use_runtimelinking" = yes; then -- # If using run time linking (on AIX 4.2 or later) use lib.so -- # instead of lib.a to let people know that these are not -- # typical AIX shared libraries. -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- else -- # We preserve .a as extension for shared libraries through AIX4.2 -- # and later when we are not doing run time linking. -- library_names_spec='${libname}${release}.a $libname.a' -- soname_spec='${libname}${release}${shared_ext}$major' -- fi -- shlibpath_var=LIBPATH -- fi -- ;; -- --amigaos*) -- library_names_spec='$libname.ixlibrary $libname.a' -- # Create ${libname}_ixlibrary.a entries in /sys/libs. -- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' -- ;; -- --beos*) -- library_names_spec='${libname}${shared_ext}' -- dynamic_linker="$host_os ld.so" -- shlibpath_var=LIBRARY_PATH -- ;; -- --bsdi4*) -- version_type=linux -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" -- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" -- # the default ld.so.conf also contains /usr/contrib/lib and -- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow -- # libtool to hard-code these into programs -- ;; -- --cygwin* | mingw* | pw32*) -- version_type=windows -- shrext_cmds=".dll" -- need_version=no -- need_lib_prefix=no + +- # Make sure dlfiles contains only unique files that won't be dlpreopened +- old_dlfiles="$dlfiles" +- dlfiles= +- for lib in $old_dlfiles; do +- case " $dlprefiles $dlfiles " in +- *" $lib "*) ;; +- *) dlfiles="$dlfiles $lib" ;; ++ # Deduce the name of the destination old-style object file. ++ case $destfile in ++ *.lo) ++ func_lo2o "$destfile" ++ staticdest=$func_lo2o_result ++ ;; ++ *.$objext) ++ staticdest="$destfile" ++ destfile= ++ ;; ++ *) ++ func_fatal_help "cannot copy a libtool object to \`$destfile'" ++ ;; + esac +- done + +- # Make sure dlprefiles contains only unique files +- old_dlprefiles="$dlprefiles" +- dlprefiles= +- for lib in $old_dlprefiles; do +- case "$dlprefiles " in +- *" $lib "*) ;; +- *) dlprefiles="$dlprefiles $lib" ;; +- esac +- done ++ # Install the libtool object if requested. ++ test -n "$destfile" && \ ++ func_show_eval "$install_prog $file $destfile" 'exit $?' + +- if test "$build_libtool_libs" = yes; then +- if test -n "$rpath"; then +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) +- # these systems don't actually have a c library (as such)! +- ;; +- *-*-rhapsody* | *-*-darwin1.[012]) +- # Rhapsody C library is in the System framework +- deplibs="$deplibs -framework System" ++ # Install the old object if enabled. ++ if test "$build_old_libs" = yes; then ++ # Deduce the name of the old-style object file. ++ func_lo2o "$file" ++ staticobj=$func_lo2o_result ++ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' ++ fi ++ exit $EXIT_SUCCESS ++ ;; ++ ++ *) ++ # Figure out destination file name, if it wasn't already specified. ++ if test -n "$destname"; then ++ destfile="$destdir/$destname" ++ else ++ func_basename "$file" ++ destfile="$func_basename_result" ++ destfile="$destdir/$destfile" ++ fi ++ ++ # If the file is missing, and there is a .exe on the end, strip it ++ # because it is most likely a libtool script we actually want to ++ # install ++ stripped_ext="" ++ case $file in ++ *.exe) ++ if test ! -f "$file"; then ++ func_stripname '' '.exe' "$file" ++ file=$func_stripname_result ++ stripped_ext=".exe" ++ fi + ;; +- *-*-netbsd*) +- # Don't link with libc until the a.out ld.so is fixed. ++ esac ++ ++ # Do a test to see if this is really a libtool program. ++ case $host in ++ *cygwin* | *mingw*) ++ if func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ wrapper=$func_ltwrapper_scriptname_result ++ else ++ func_stripname '' '.exe' "$file" ++ wrapper=$func_stripname_result ++ fi + ;; +- *-*-openbsd* | *-*-freebsd*) +- # Do not include libc due to us having libc/libc_r. +- test "X$arg" = "X-lc" && continue ++ *) ++ wrapper=$file + ;; +- *) +- # Add libc to deplibs on all other systems if necessary. +- if test "$build_libtool_need_lc" = "yes"; then +- deplibs="$deplibs -lc" ++ esac ++ if func_ltwrapper_script_p "$wrapper"; then ++ notinst_deplibs= ++ relink_command= ++ ++ func_source "$wrapper" ++ ++ # Check the variables that should have been set. ++ test -z "$generated_by_libtool_version" && \ ++ func_fatal_error "invalid libtool wrapper script \`$wrapper'" ++ ++ finalize=yes ++ for lib in $notinst_deplibs; do ++ # Check to see that each library is installed. ++ libdir= ++ if test -f "$lib"; then ++ func_source "$lib" + fi +- ;; +- esac +- fi ++ libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test ++ if test -n "$libdir" && test ! -f "$libfile"; then ++ func_warning "\`$lib' has not been installed in \`$libdir'" ++ finalize=no ++ fi ++ done + +- # Transform deplibs into only deplibs that can be linked in shared. +- name_save=$name +- libname_save=$libname +- release_save=$release +- versuffix_save=$versuffix +- major_save=$major +- # I'm not sure if I'm treating the release correctly. I think +- # release should show up in the -l (ie -lgmp5) so we don't want to +- # add it in twice. Is that correct? +- release="" +- versuffix="" +- major="" +- newdeplibs= +- droppeddeps=no +- case $deplibs_check_method in +- pass_all) +- # Don't check for shared/static. Everything works. +- # This might be a little naive. We might want to check +- # whether the library exists or not. But this is on +- # osf3 & osf4 and I'm not really sure... Just +- # implementing what was already the behavior. +- newdeplibs=$deplibs +- ;; +- test_compile) +- # This code stresses the "libraries are programs" paradigm to its +- # limits. Maybe even breaks it. We compile a program, linking it +- # against the deplibs as a proxy for the library. Then we can check +- # whether they linked in statically or dynamically with ldd. +- $rm conftest.c +- cat > conftest.c </dev/null` +- for potent_lib in $potential_libs; do +- # Follow soft links. +- if ls -lLd "$potent_lib" 2>/dev/null \ +- | grep " -> " >/dev/null; then +- continue +- fi +- # The statement above tries to avoid entering an +- # endless loop below, in case of cyclic links. +- # We might still enter an endless loop, since a link +- # loop can be closed while we follow links, +- # but so what? +- potlib="$potent_lib" +- while test -h "$potlib" 2>/dev/null; do +- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` +- case $potliblink in +- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; +- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; +- esac +- done +- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ +- | ${SED} 10q \ +- | $EGREP "$file_magic_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi +- done +- done +- fi +- if test -n "$a_deplib" ; then +- droppeddeps=yes +- $echo +- $echo "*** Warning: linker path does not have real file for library $a_deplib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have" +- $echo "*** because I did check the linker path looking for a file starting" +- if test -z "$potlib" ; then +- $echo "*** with $libname but no candidates were found. (...for file magic test)" +- else +- $echo "*** with $libname and none of the candidates passed a file format test" +- $echo "*** using a file magic. Last file checked: $potlib" +- fi +- fi +- else +- # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" +- fi +- done # Gone through all deplibs. +- ;; +- match_pattern*) +- set dummy $deplibs_check_method +- match_pattern_regex=`expr "$deplibs_check_method" : "$2 $.*$"` +- for a_deplib in $deplibs; do +- name="`expr $a_deplib : '-l$.*$'`" +- # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $a_deplib "*) +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- ;; +- esac +- fi +- if test -n "$a_deplib" ; then +- libname=`eval \\$echo \"$libname_spec\"` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do +- potlib="$potent_lib" # see symlink-check above in file_magic test +- if eval $echo \"$potent_lib\" 2>/dev/null \ +- | ${SED} 10q \ +- | $EGREP "$match_pattern_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi +- done +- done +- fi +- if test -n "$a_deplib" ; then +- droppeddeps=yes +- $echo +- $echo "*** Warning: linker path does not have real file for library $a_deplib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have" +- $echo "*** because I did check the linker path looking for a file starting" +- if test -z "$potlib" ; then +- $echo "*** with $libname but no candidates were found. (...for regex pattern test)" +- else +- $echo "*** with $libname and none of the candidates passed a file format test" +- $echo "*** using a regex pattern. Last file checked: $potlib" +- fi +- fi +- else +- # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" +- fi +- done # Gone through all deplibs. +- ;; +- none | unknown | *) +- newdeplibs="" +- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ +- -e 's/ -[LR][^ ]*//g'` +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- for i in $predeps $postdeps ; do +- # can't use Xsed below, because $i might contain '/' +- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` +- done +- fi +- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ +- | grep . >/dev/null; then +- $echo +- if test "X$deplibs_check_method" = "Xnone"; then +- $echo "*** Warning: inter-library dependencies are not supported in this platform." +- else +- $echo "*** Warning: inter-library dependencies are not known to be supported." +- fi +- $echo "*** All declared inter-library dependencies are being dropped." +- droppeddeps=yes ++ # Install the binary that we compiled earlier. ++ file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%$[^/]*$$%$objdir/\1%"` + fi ++ fi ++ ++ # remove .exe since cygwin /usr/bin/install will append another ++ # one anyway ++ case $install_prog,$host in ++ */usr/bin/install*,*cygwin*) ++ case $file:$destfile in ++ *.exe:*.exe) ++ # this is ok ++ ;; ++ *.exe:*) ++ destfile=$destfile.exe ++ ;; ++ *:*.exe) ++ func_stripname '' '.exe' "$destfile" ++ destfile=$func_stripname_result ++ ;; ++ esac + ;; + esac +- versuffix=$versuffix_save +- major=$major_save +- release=$release_save +- libname=$libname_save +- name=$name_save ++ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' ++ $opt_dry_run || if test -n "$outputname"; then ++ ${RM}r "$tmpdir" ++ fi ++ ;; ++ esac ++ done + +- case $host in +- *-*-rhapsody* | *-*-darwin1.[012]) +- # On Rhapsody replace the C library is the System framework +- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` +- ;; +- esac ++ for file in $staticlibs; do ++ func_basename "$file" ++ name="$func_basename_result" + +- if test "$droppeddeps" = yes; then +- if test "$module" = yes; then +- $echo +- $echo "*** Warning: libtool could not satisfy all declared inter-library" +- $echo "*** dependencies of module $libname. Therefore, libtool will create" +- $echo "*** a static module, that should work as long as the dlopening" +- $echo "*** application is linked with the -dlopen flag." +- if test -z "$global_symbol_pipe"; then +- $echo +- $echo "*** However, this would only work if libtool was able to extract symbol" +- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- $echo "*** not find such a program. So, this module is probably useless." +- $echo "*** \`nm' from GNU binutils and a full rebuild may help." +- fi +- if test "$build_old_libs" = no; then +- oldlibs="$output_objdir/$libname.$libext" +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no +- fi +- else +- $echo "*** The inter-library dependencies that have been dropped here will be" +- $echo "*** automatically added whenever a program is linked with this library" +- $echo "*** or is declared to -dlopen it." ++ # Set up the ranlib parameters. ++ oldlib="$destdir/$name" + +- if test "$allow_undefined" = no; then +- $echo +- $echo "*** Since this library must not contain undefined symbols," +- $echo "*** because either the platform does not support them or" +- $echo "*** it was explicitly requested with -no-undefined," +- $echo "*** libtool will only create a static version of it." +- if test "$build_old_libs" = no; then +- oldlibs="$output_objdir/$libname.$libext" +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no +- fi +- fi +- fi +- fi +- # Done checking deplibs! +- deplibs=$newdeplibs ++ func_show_eval "$install_prog \$file \$oldlib" 'exit $?' ++ ++ if test -n "$stripme" && test -n "$old_striplib"; then ++ func_show_eval "$old_striplib $oldlib" 'exit $?' + fi + +- # All the library-specific variables (install_libdir is set above). +- library_names= +- old_library= +- dlname= ++ # Do each command in the postinstall commands. ++ func_execute_cmds "$old_postinstall_cmds" 'exit $?' ++ done + +- # Test again, we may have decided not to build it any more +- if test "$build_libtool_libs" = yes; then +- if test "$hardcode_into_libs" = yes; then +- # Hardcode the library paths +- hardcode_libdirs= +- dep_rpath= +- rpath="$finalize_rpath" +- test "$mode" != relink && rpath="$compile_rpath$rpath" +- for libdir in $rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- dep_rpath="$dep_rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$perm_rpath " in +- *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; +- esac +- fi +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- if test -n "$hardcode_libdir_flag_spec_ld"; then +- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" +- else +- eval dep_rpath=\"$hardcode_libdir_flag_spec\" +- fi +- fi +- if test -n "$runpath_var" && test -n "$perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $perm_rpath; do +- rpath="$rpath$dir:" +- done +- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" +- fi +- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" +- fi ++ test -n "$future_libdirs" && \ ++ func_warning "remember to run \`$progname --finish$future_libdirs'" + +- shlibpath="$finalize_shlibpath" +- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" +- if test -n "$shlibpath"; then +- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" +- fi ++ if test -n "$current_libdirs"; then ++ # Maybe just do a dry run. ++ $opt_dry_run && current_libdirs=" -n$current_libdirs" ++ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' ++ else ++ exit $EXIT_SUCCESS ++ fi ++} + +- # Get the real and link names of the library. +- eval shared_ext=\"$shrext_cmds\" +- eval library_names=\"$library_names_spec\" +- set dummy $library_names +- realname="$2" +- shift; shift ++test "$mode" = install && func_mode_install ${1+"$@"} + +- if test -n "$soname_spec"; then +- eval soname=\"$soname_spec\" +- else +- soname="$realname" +- fi +- if test -z "$dlname"; then +- dlname=$soname +- fi + +- lib="$output_objdir/$realname" +- for link +- do +- linknames="$linknames $link" +- done ++# func_generate_dlsyms outputname originator pic_p ++# Extract symbols from dlprefiles and create ${outputname}S.o with ++# a dlpreopen symbol table. ++func_generate_dlsyms () ++{ ++ $opt_debug ++ my_outputname="$1" ++ my_originator="$2" ++ my_pic_p="${3-no}" ++ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` ++ my_dlsyms= ++ ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ if test -n "$NM" && test -n "$global_symbol_pipe"; then ++ my_dlsyms="${my_outputname}S.c" ++ else ++ func_error "not configured to extract global symbols from dlpreopened files" ++ fi ++ fi + +- # Use standard objects if they are pic +- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ if test -n "$my_dlsyms"; then ++ case $my_dlsyms in ++ "") ;; ++ *.c) ++ # Discover the nlist of each of the dlfiles. ++ nlist="$output_objdir/${my_outputname}.nm" + +- # Prepare the list of exported symbols +- if test -z "$export_symbols"; then +- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then +- $show "generating symbol list for \`$libname.la'" +- export_symbols="$output_objdir/$libname.exp" +- $run $rm $export_symbols +- cmds=$export_symbols_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- if len=`expr "X$cmd" : ".*"` && +- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then +- $show "$cmd" +- $run eval "$cmd" || exit $? +- skipped_export=false +- else +- # The command line is too long to execute in one step. +- $show "using reloadable object file for export list..." +- skipped_export=: +- fi +- done +- IFS="$save_ifs" +- if test -n "$export_symbols_regex"; then +- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" +- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' +- $show "$mv \"${export_symbols}T\" \"$export_symbols\"" +- $run eval '$mv "${export_symbols}T" "$export_symbols"' +- fi +- fi +- fi ++ func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + +- if test -n "$export_symbols" && test -n "$include_expsyms"; then +- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' +- fi ++ # Parse the name list into a source file. ++ func_verbose "creating $output_objdir/$my_dlsyms" + +- tmp_deplibs= +- for test_deplib in $deplibs; do +- case " $convenience " in +- *" $test_deplib "*) ;; +- *) +- tmp_deplibs="$tmp_deplibs $test_deplib" +- ;; +- esac +- done +- deplibs="$tmp_deplibs" ++ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ ++/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ ++/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +- if test -n "$convenience"; then +- if test -n "$whole_archive_flag_spec"; then +- save_libobjs=$libobjs +- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" +- else +- gentop="$output_objdir/${outputname}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "$mkdir $gentop" +- $run $mkdir "$gentop" +- status=$? +- if test "$status" -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi +- generated="$generated $gentop" - -- case $GCC,$host_os in -- yes,cygwin* | yes,mingw* | yes,pw32*) -- library_names_spec='$libname.dll.a' -- # DLL is installed to $(libdir)/../bin by postinstall_cmds -- postinstall_cmds='base_file=`basename \${file}`~ -- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ -- dldir=$destdir/`dirname \$dlpath`~ -- test -d \$dldir || mkdir -p \$dldir~ -- $install_prog $dir/$dlname \$dldir/$dlname' -- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ -- dlpath=$dir/\$dldll~ -- $rm \$dlpath' -- shlibpath_overrides_runpath=yes +- for xlib in $convenience; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" ++#ifdef __cplusplus ++extern \"C\" { ++#endif + +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "$mkdir $xdir" +- $run $mkdir "$xdir" +- status=$? +- if test "$status" -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- # We will extract separately just the conflicting names and we will no +- # longer touch any unique names. It is faster to leave these extract +- # automatically by $AR in one run. +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? +- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then +- : +- else +- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 +- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 +- $AR t "$xabs" | sort | uniq -cd | while read -r count name +- do +- i=1 +- while test "$i" -le "$count" +- do +- # Put our $i before any first dot (extension) +- # Never overwrite any file +- name_to="$name" +- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" +- do +- name_to=`$echo "X$name_to" | $Xsed -e "s/$[^.]*$/\1-$i/"` +- done +- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" +- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? +- i=`expr $i + 1` +- done +- done +- fi ++/* External symbol declarations for the compiler. */\ ++" + +- libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` +- done +- fi +- fi ++ if test "$dlself" = yes; then ++ func_verbose "generating symbol list for \`$output'" + +- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then +- eval flag=\"$thread_safe_flag_spec\" +- linker_flags="$linker_flags $flag" +- fi ++ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + +- # Make a backup of the uninstalled library when relinking +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? +- fi ++ # Add our own program objects to the symbol list. ++ progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ for progfile in $progfiles; do ++ func_verbose "extracting global C symbols from \`$progfile'" ++ $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" ++ done + +- # Do each of the archive commands. +- if test "$module" = yes && test -n "$module_cmds" ; then +- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then +- eval test_cmds=\"$module_expsym_cmds\" +- cmds=$module_expsym_cmds ++ if test -n "$exclude_expsyms"; then ++ $opt_dry_run || { ++ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ } ++ fi ++ ++ if test -n "$export_symbols_regex"; then ++ $opt_dry_run || { ++ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ } ++ fi ++ ++ # Prepare the list of exported symbols ++ if test -z "$export_symbols"; then ++ export_symbols="$output_objdir/$outputname.exp" ++ $opt_dry_run || { ++ $RM $export_symbols ++ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* $.*$$/\1/p' "'< "$nlist" > "$export_symbols"' ++ case $host in ++ *cygwin* | *mingw* | *cegcc* ) ++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac ++ } + else +- eval test_cmds=\"$module_cmds\" +- cmds=$module_cmds +- fi +- else +- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then +- eval test_cmds=\"$archive_expsym_cmds\" +- cmds=$archive_expsym_cmds +- else +- eval test_cmds=\"$archive_cmds\" +- cmds=$archive_cmds ++ $opt_dry_run || { ++ eval "${SED} -e 's/$[].[*^$]$/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' ++ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ case $host in ++ *cygwin | *mingw* | *cegcc* ) ++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac ++ } + fi + fi + +- if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` && +- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then +- : +- else +- # The command line is too long to link in one step, link piecewise. +- $echo "creating reloadable object files..." ++ for dlprefile in $dlprefiles; do ++ func_verbose "extracting global C symbols from \`$dlprefile'" ++ func_basename "$dlprefile" ++ name="$func_basename_result" ++ $opt_dry_run || { ++ eval '$ECHO ": $name " >> "$nlist"' ++ eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" ++ } ++ done + +- # Save the value of $output and $libobjs because we want to +- # use them later. If we have whole_archive_flag_spec, we +- # want to use save_libobjs as it was before +- # whole_archive_flag_spec was expanded, because we can't +- # assume the linker understands whole_archive_flag_spec. +- # This may have to be revisited, in case too many +- # convenience libraries get linked in and end up exceeding +- # the spec. +- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then +- save_libobjs=$libobjs ++ $opt_dry_run || { ++ # Make sure we have at least an empty file. ++ test -f "$nlist" || : > "$nlist" ++ ++ if test -n "$exclude_expsyms"; then ++ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T ++ $MV "$nlist"T "$nlist" + fi +- save_output=$output + +- # Clear the reloadable object creation command queue and +- # initialize k to one. +- test_cmds= +- concat_cmds= +- objlist= +- delfiles= +- last_robj= +- k=1 +- output=$output_objdir/$save_output-${k}.$objext +- # Loop over the list of objects to be linked. +- for obj in $save_libobjs +- do +- eval test_cmds=\"$reload_cmds $objlist $last_robj\" +- if test "X$objlist" = X || +- { len=`expr "X$test_cmds" : ".*"` && +- test "$len" -le "$max_cmd_len"; }; then +- objlist="$objlist $obj" +- else +- # The command $test_cmds is almost too long, add a +- # command to the queue. +- if test "$k" -eq 1 ; then +- # The first file doesn't have a previous command to add. +- eval concat_cmds=\"$reload_cmds $objlist $last_robj\" ++ # Try sorting and uniquifying the output. ++ if $GREP -v "^: " < "$nlist" | ++ if sort -k 3 /dev/null 2>&1; then ++ sort -k 3 + else +- # All subsequent reloadable object files will link in +- # the last one created. +- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" +- fi +- last_robj=$output_objdir/$save_output-${k}.$objext +- k=`expr $k + 1` +- output=$output_objdir/$save_output-${k}.$objext +- objlist=$obj +- len=1 +- fi +- done +- # Handle the remaining objects by creating one last +- # reloadable object file. All subsequent reloadable object +- # files will link in the last one created. +- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ +- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" ++ sort +2 ++ fi | ++ uniq > "$nlist"S; then ++ : ++ else ++ $GREP -v "^: " < "$nlist" > "$nlist"S ++ fi + +- if ${skipped_export-false}; then +- $show "generating symbol list for \`$libname.la'" +- export_symbols="$output_objdir/$libname.exp" +- $run $rm $export_symbols +- libobjs=$output +- # Append the command to create the export file. +- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" +- fi - -- case $host_os in -- cygwin*) -- # Cygwin DLLs use 'cyg' prefix rather than 'lib' -- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" -- ;; -- mingw*) -- # MinGW DLLs use traditional 'lib' prefix -- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then -- # It is most probably a Windows format PATH printed by -- # mingw gcc, but we are running on Cygwin. Gcc prints its search -- # path with ; separators, and with drive letters. We can handle the -- # drive letters (cygwin fileutils understands them), so leave them, -- # especially as we might pass files found there to a mingw objdump, -- # which wouldn't understand a cygwinified path. Ahh. -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -- else -- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- # Set up a command to remove the reloadale object files +- # after they are used. +- i=0 +- while test "$i" -lt "$k" +- do +- i=`expr $i + 1` +- delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" +- done ++ if test -f "$nlist"S; then ++ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' ++ else ++ $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" ++ fi + +- $echo "creating a temporary reloadable object file: $output" ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ + +- # Loop through the commands generated above and execute them. +- save_ifs="$IFS"; IFS='~' +- for cmd in $concat_cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" ++/* The mapping between symbol names and symbols. */ ++typedef struct { ++ const char *name; ++ void *address; ++} lt_dlsymlist; ++" ++ case $host in ++ *cygwin* | *mingw* | *cegcc* ) ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ ++/* DATA imports from DLLs on WIN32 con't be const, because ++ runtime relocations are performed -- see ld's documentation ++ on pseudo-relocs. */" ++ lt_dlsym_const= ;; ++ *osf5*) ++ echo >> "$output_objdir/$my_dlsyms" "\ ++/* This system does not cope well with relocations in const data */" ++ lt_dlsym_const= ;; ++ *) ++ lt_dlsym_const=const ;; ++ esac + +- libobjs=$output +- # Restore the value of output. +- output=$save_output ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ ++extern $lt_dlsym_const lt_dlsymlist ++lt_${my_prefix}_LTX_preloaded_symbols[]; ++$lt_dlsym_const lt_dlsymlist ++lt_${my_prefix}_LTX_preloaded_symbols[] = ++{\ ++ { \"$my_originator\", (void *) 0 }," + +- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then +- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" +- fi +- # Expand the library linking commands again to reset the +- # value of $libobjs for piecewise linking. ++ case $need_lib_prefix in ++ no) ++ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ++ ;; ++ *) ++ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ++ ;; ++ esac ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ ++ {0, (void *) 0} ++}; + +- # Do each of the archive commands. +- if test "$module" = yes && test -n "$module_cmds" ; then +- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then +- cmds=$module_expsym_cmds +- else +- cmds=$module_cmds +- fi +- else +- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then +- cmds=$archive_expsym_cmds +- else +- cmds=$archive_cmds +- fi +- fi ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt_${my_prefix}_LTX_preloaded_symbols; ++} ++#endif + +- # Append the command to remove the reloadable object files +- # to the just-reset $cmds. +- eval cmds=\"\$cmds~\$rm $delfiles\" +- fi +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? ++#ifdef __cplusplus ++} ++#endif\ ++" ++ } # !$opt_dry_run ++ ++ pic_flag_for_symtable= ++ case "$compile_command " in ++ *" -static "*) ;; ++ *) ++ case $host in ++ # compiling the symbol table file with pic_flag works around ++ # a FreeBSD bug that causes programs to crash when -lm is ++ # linked before any other PIC object. But we must not use ++ # pic_flag when linking with -static. The problem exists in ++ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. ++ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) ++ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; ++ *-*-hpux*) ++ pic_flag_for_symtable=" $pic_flag" ;; ++ *) ++ if test "X$my_pic_p" != Xno; then ++ pic_flag_for_symtable=" $pic_flag" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ symtab_cflags= ++ for arg in $LTCFLAGS; do ++ case $arg in ++ -pie | -fpie | -fPIE) ;; ++ *) symtab_cflags="$symtab_cflags $arg" ;; ++ esac + done +- IFS="$save_ifs" + +- # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? +- exit $EXIT_SUCCESS +- fi ++ # Now compile the dynamic symbol file. ++ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + +- # Create links to the real library. +- for linkname in $linknames; do +- if test "$realname" != "$linkname"; then +- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" +- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? ++ # Clean up the generated files. ++ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' ++ ++ # Transform the symbol file into the correct name. ++ symfileobj="$output_objdir/${my_outputname}S.$objext" ++ case $host in ++ *cygwin* | *mingw* | *cegcc* ) ++ if test -f "$output_objdir/$my_outputname.def"; then ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` ++ else ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + fi +- done ++ ;; ++ *) ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ++ ;; ++ esac ++ ;; ++ *) ++ func_fatal_error "unknown suffix for \`$my_dlsyms'" ++ ;; ++ esac ++ else ++ # We keep going just in case the user didn't refer to ++ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe ++ # really was required. ++ ++ # Nullify the symbol file. ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` ++ fi ++} + +- # If -module or -export-dynamic was specified, set the dlname. +- if test "$module" = yes || test "$export_dynamic" = yes; then +- # On all known operating systems, these are identical. +- dlname="$soname" +- fi +- fi ++# func_win32_libid arg ++# return the library type of file 'arg' ++# ++# Need a lot of goo to handle *both* DLLs and import libs ++# Has to be a shell function in order to 'eat' the argument ++# that is supplied when $file_magic_command is called. ++func_win32_libid () ++{ ++ $opt_debug ++ win32_libid_type="unknown" ++ win32_fileres=`file -L $1 2>/dev/null` ++ case $win32_fileres in ++ *ar\ archive\ import\ library*) # definitely import ++ win32_libid_type="x86 archive import" ++ ;; ++ *ar\ archive*) # could be an import, or static ++ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | ++ $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then ++ win32_nmres=`eval $NM -f posix -A $1 | ++ $SED -n -e ' ++ 1,100{ ++ / I /{ ++ s,.*,import, ++ p ++ q ++ } ++ }'` ++ case $win32_nmres in ++ import*) win32_libid_type="x86 archive import";; ++ *) win32_libid_type="x86 archive static";; ++ esac ++ fi ++ ;; ++ *DLL*) ++ win32_libid_type="x86 DLL" ++ ;; ++ *executable*) # but shell scripts are "executable" too... ++ case $win32_fileres in ++ *MS\ Windows\ PE\ Intel*) ++ win32_libid_type="x86 DLL" + ;; ++ esac ++ ;; ++ esac ++ $ECHO "$win32_libid_type" ++} + +- obj) +- if test -n "$deplibs"; then +- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 - fi -- ;; -- pw32*) -- # pw32 DLLs use 'pw' prefix rather than 'lib' -- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' -- ;; -- esac -- ;; -- -- *) -- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' -- ;; -- esac -- dynamic_linker='Win32 ld.exe' -- # FIXME: first we should search . and the directory the executable is in -- shlibpath_var=PATH -- ;; -- --darwin* | rhapsody*) -- dynamic_linker="$host_os dyld" -- version_type=darwin -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' -- soname_spec='${libname}${release}${major}$shared_ext' -- shlibpath_overrides_runpath=yes -- shlibpath_var=DYLD_LIBRARY_PATH -- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' -- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. -- if test "$GCC" = yes; then -- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` -- else -- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' -- fi -- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' -- ;; -- --dgux*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- ;; -- --freebsd1*) -- dynamic_linker=no -- ;; -- --kfreebsd*-gnu) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- dynamic_linker='GNU ld.so' -- ;; -- --freebsd*) -- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` -- version_type=freebsd-$objformat -- case $version_type in -- freebsd-elf*) -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -- need_version=no -- need_lib_prefix=no -- ;; -- freebsd-*) -- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' -- need_version=yes -- ;; -- esac -- shlibpath_var=LD_LIBRARY_PATH -- case $host_os in -- freebsd2*) -- shlibpath_overrides_runpath=yes -- ;; -- freebsd3.01* | freebsdelf3.01*) -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -- ;; -- *) # from 3.2 on -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- ;; -- esac -- ;; -- --gnu*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- hardcode_into_libs=yes -- ;; -- --hpux9* | hpux10* | hpux11*) -- # Give a soname corresponding to the major version so that dld.sl refuses to -- # link against other versions. -- version_type=sunos -- need_lib_prefix=no -- need_version=no -- case "$host_cpu" in -- ia64*) -- shrext_cmds='.so' -- hardcode_into_libs=yes -- dynamic_linker="$host_os dld.so" -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- if test "X$HPUX_IA64_MODE" = X32; then -- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" -- else -- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" -- fi -- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -- ;; -- hppa*64*) -- shrext_cmds='.sl' -- hardcode_into_libs=yes -- dynamic_linker="$host_os dld.sl" -- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH -- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" -- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -- ;; -- *) -- shrext_cmds='.sl' -- dynamic_linker="$host_os dld.sl" -- shlibpath_var=SHLIB_PATH -- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- ;; -- esac -- # HP-UX runs *really* slowly unless shared libraries are mode 555. -- postinstall_cmds='chmod 555 $lib' -- ;; -- --irix5* | irix6* | nonstopux*) -- case $host_os in -- nonstopux*) version_type=nonstopux ;; -- *) -- if test "$lt_cv_prog_gnu_ld" = yes; then -- version_type=linux + +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 +- fi + +- if test -n "$rpath"; then +- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 +- fi ++# func_extract_an_archive dir oldlib ++func_extract_an_archive () ++{ ++ $opt_debug ++ f_ex_an_ar_dir="$1"; shift ++ f_ex_an_ar_oldlib="$1" ++ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' ++ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" ++ fi ++} + +- if test -n "$xrpath"; then +- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 +- fi + +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 +- fi ++# func_extract_archives gentop oldlib ... ++func_extract_archives () ++{ ++ $opt_debug ++ my_gentop="$1"; shift ++ my_oldlibs=${1+"$@"} ++ my_oldobjs="" ++ my_xlib="" ++ my_xabs="" ++ my_xdir="" ++ ++ for my_xlib in $my_oldlibs; do ++ # Extract the objects. ++ case $my_xlib in ++ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; ++ *) my_xabs=`pwd`"/$my_xlib" ;; ++ esac ++ func_basename "$my_xlib" ++ my_xlib="$func_basename_result" ++ my_xlib_u=$my_xlib ++ while :; do ++ case " $extracted_archives " in ++ *" $my_xlib_u "*) ++ func_arith $extracted_serial + 1 ++ extracted_serial=$func_arith_result ++ my_xlib_u=lt$extracted_serial-$my_xlib ;; ++ *) break ;; ++ esac ++ done ++ extracted_archives="$extracted_archives $my_xlib_u" ++ my_xdir="$my_gentop/$my_xlib_u" + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 +- fi ++ func_mkdir_p "$my_xdir" + +- case $output in +- *.lo) +- if test -n "$objs$old_deplibs"; then +- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 +- exit $EXIT_FAILURE +- fi +- libobj="$output" +- obj=`$echo "X$output" | $Xsed -e "$lo2o"` ++ case $host in ++ *-darwin*) ++ func_verbose "Extracting $my_xabs" ++ # Do not bother doing anything if just a dry run ++ $opt_dry_run || { ++ darwin_orig_dir=`pwd` ++ cd $my_xdir || exit $? ++ darwin_archive=$my_xabs ++ darwin_curdir=`pwd` ++ darwin_base_archive=`basename "$darwin_archive"` ++ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` ++ if test -n "$darwin_arches"; then ++ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` ++ darwin_arch= ++ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" ++ for darwin_arch in $darwin_arches ; do ++ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" ++ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ func_extract_an_archive "`pwd`" "${darwin_base_archive}" ++ cd "$darwin_curdir" ++ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" ++ done # $darwin_arches ++ ## Okay now we've a bunch of thin objects, gotta fatten them up :) ++ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` ++ darwin_file= ++ darwin_files= ++ for darwin_file in $darwin_filelist; do ++ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` ++ $LIPO -create -output "$darwin_file" $darwin_files ++ done # $darwin_filelist ++ $RM -rf unfat-$$ ++ cd "$darwin_orig_dir" ++ else ++ cd $darwin_orig_dir ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ fi # $darwin_arches ++ } # !$opt_dry_run + ;; + *) +- libobj= +- obj="$output" ++ func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac ++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` ++ done + +- # Delete the old objects. +- $run $rm $obj $libobj ++ func_extract_archives_result="$my_oldobjs" ++} + +- # Objects from convenience libraries. This assumes +- # single-version convenience libraries. Whenever we create +- # different ones for PIC/non-PIC, this we'll have to duplicate +- # the extraction. +- reload_conv_objs= +- gentop= +- # reload_cmds runs $LD directly, so let us get rid of +- # -Wl from whole_archive_flag_spec +- wl= + +- if test -n "$convenience"; then +- if test -n "$whole_archive_flag_spec"; then +- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" - else -- version_type=irix -- fi ;; -- esac -- need_lib_prefix=no -- need_version=no -- soname_spec='${libname}${release}${shared_ext}$major' -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' -- case $host_os in -- irix5* | nonstopux*) -- libsuff= shlibsuff= -- ;; -- *) -- case $LD in # libtool.m4 will add one of these switches to LD -- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") -- libsuff= shlibsuff= libmagic=32-bit;; -- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") -- libsuff=32 shlibsuff=N32 libmagic=N32;; -- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") -- libsuff=64 shlibsuff=64 libmagic=64-bit;; -- *) libsuff= shlibsuff= libmagic=never-match;; -- esac -- ;; -- esac -- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH -- shlibpath_overrides_runpath=no -- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" -- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" -- hardcode_into_libs=yes -- ;; -- --# No shared lib support for Linux oldld, aout, or coff. --linux*oldld* | linux*aout* | linux*coff*) -- dynamic_linker=no -- ;; -- --# This must be Linux ELF. --linux*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- # This implies no fast_install, which is unacceptable. -- # Some rework will be needed to allow for fast_install -- # before this can be enabled. -- hardcode_into_libs=yes -- -- # find out which ABI we are using -- libsuff= -- case "$host_cpu" in -- x86_64*|s390x*|powerpc64*) -- echo '#line 17153 "configure"' > conftest.$ac_ext -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; then -- case `/usr/bin/file conftest.$ac_objext` in -- *64-bit*) -- libsuff=64 -- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" -- ;; -- esac -- fi -- rm -rf conftest* -- ;; -- esac -- -- # Append ld.so.conf contents to the search path -- if test -f /etc/ld.so.conf; then -- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` -- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" -- fi -- -- # We used to test for /lib/ld.so.1 and disable shared libraries on -- # powerpc, because MkLinux only supported shared libraries with the -- # GNU dynamic linker. Since this was broken with cross compilers, -- # most powerpc-linux boxes support dynamic linking these days and -- # people can always --disable-shared, the test was removed, and we -- # assume the GNU/Linux dynamic linker is in use. -- dynamic_linker='GNU/Linux ld.so' -- ;; -- --knetbsd*-gnu) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=no -- hardcode_into_libs=yes -- dynamic_linker='GNU ld.so' -- ;; -- --netbsd*) -- version_type=sunos -- need_lib_prefix=no -- need_version=no -- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -- dynamic_linker='NetBSD (a.out) ld.so' -- else -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- dynamic_linker='NetBSD ld.elf_so' -- fi -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -- ;; -- --newsos6) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- ;; -- --nto-qnx*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- ;; -- --openbsd*) -- version_type=sunos -- need_lib_prefix=no -- need_version=yes -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -- case $host_os in -- openbsd2.[89] | openbsd2.[89].*) -- shlibpath_overrides_runpath=no -- ;; -- *) -- shlibpath_overrides_runpath=yes -- ;; -- esac -- else -- shlibpath_overrides_runpath=yes -- fi -- ;; -- --os2*) -- libname_spec='$name' -- shrext_cmds=".dll" -- need_lib_prefix=no -- library_names_spec='$libname${shared_ext} $libname.a' -- dynamic_linker='OS/2 ld.exe' -- shlibpath_var=LIBPATH -- ;; -- --osf3* | osf4* | osf5*) -- version_type=osf -- need_lib_prefix=no -- need_version=no -- soname_spec='${libname}${release}${shared_ext}$major' -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" -- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" -- ;; -- --sco3.2v5*) -- version_type=osf -- soname_spec='${libname}${release}${shared_ext}$major' -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- shlibpath_var=LD_LIBRARY_PATH -- ;; -- --solaris*) -- version_type=linux -- need_lib_prefix=no -- need_version=no -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- hardcode_into_libs=yes -- # ldd complains unless libraries are executable -- postinstall_cmds='chmod +x $lib' -- ;; +- gentop="$output_objdir/${obj}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "$mkdir $gentop" +- $run $mkdir "$gentop" +- status=$? +- if test "$status" -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi +- generated="$generated $gentop" + +- for xlib in $convenience; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" ++# func_emit_wrapper_part1 [arg=no] ++# ++# Emit the first part of a libtool wrapper script on stdout. ++# For more information, see the description associated with ++# func_emit_wrapper(), below. ++func_emit_wrapper_part1 () ++{ ++ func_emit_wrapper_part1_arg1=no ++ if test -n "$1" ; then ++ func_emit_wrapper_part1_arg1=$1 ++ fi + +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "$mkdir $xdir" +- $run $mkdir "$xdir" +- status=$? +- if test "$status" -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- # We will extract separately just the conflicting names and we will no +- # longer touch any unique names. It is faster to leave these extract +- # automatically by $AR in one run. +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? +- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then +- : +- else +- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 +- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 +- $AR t "$xabs" | sort | uniq -cd | while read -r count name +- do +- i=1 +- while test "$i" -le "$count" +- do +- # Put our $i before any first dot (extension) +- # Never overwrite any file +- name_to="$name" +- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" +- do +- name_to=`$echo "X$name_to" | $Xsed -e "s/$[^.]*$/\1-$i/"` +- done +- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" +- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? +- i=`expr $i + 1` +- done +- done +- fi ++ $ECHO "\ ++#! $SHELL + +- reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` +- done +- fi +- fi - --sunos4*) -- version_type=sunos -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' -- shlibpath_var=LD_LIBRARY_PATH -- shlibpath_overrides_runpath=yes -- if test "$with_gnu_ld" = yes; then -- need_lib_prefix=no -- fi -- need_version=yes -- ;; +- # Create the old-style object. +- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - --sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- case $host_vendor in -- sni) -- shlibpath_overrides_runpath=no -- need_lib_prefix=no -- export_dynamic_flag_spec='${wl}-Blargedynsym' -- runpath_var=LD_RUN_PATH -- ;; -- siemens) -- need_lib_prefix=no -- ;; -- motorola) -- need_lib_prefix=no -- need_version=no -- shlibpath_overrides_runpath=no -- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- output="$obj" +- cmds=$reload_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" ++# $output - temporary wrapper script for $objdir/$outputname ++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION ++# ++# The $output program cannot be directly executed until all the libtool ++# libraries that it depends on are installed. ++# ++# This wrapper script should never be moved out of the build directory. ++# If it is, it will not operate correctly. + +- # Exit if we aren't doing a library object file. +- if test -z "$libobj"; then +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop +- fi ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed='${SED} -e 1s/^X//' ++sed_quote_subst='$sed_quote_subst' + +- exit $EXIT_SUCCESS +- fi ++# Be Bourne compatible ++if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '\${1+\"\$@\"}'='\"\$@\"' ++ setopt NO_GLOB_SUBST ++else ++ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac ++fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh + +- if test "$build_libtool_libs" != yes; then +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop +- fi ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +- # Create an invalid libtool object if no PIC, so that we don't +- # accidentally link it into a program. +- # $show "echo timestamp > $libobj" +- # $run eval "echo timestamp > $libobj" || exit $? +- exit $EXIT_SUCCESS +- fi ++relink_command=\"$relink_command\" + +- if test -n "$pic_flag" || test "$pic_mode" != default; then +- # Only do commands if we really have different PIC objects. +- reload_objs="$libobjs $reload_conv_objs" +- output="$libobj" +- cmds=$reload_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi ++# This environment variable determines our operation mode. ++if test \"\$libtool_install_magic\" = \"$magic\"; then ++ # install mode needs the following variables: ++ generated_by_libtool_version='$macro_version' ++ notinst_deplibs='$notinst_deplibs' ++else ++ # When we are sourced in execute mode, \$file and \$ECHO are already set. ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ ECHO=\"$qecho\" ++ file=\"\$0\" ++ # Make sure echo works. ++ if test \"X\$1\" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then ++ # Yippee, \$ECHO works! ++ : ++ else ++ # Restart under the correct shell, and then maybe \$ECHO will work. ++ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} ++ fi ++ fi\ ++" ++ $ECHO "\ + +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop +- fi ++ # Find the directory that this script lives in. ++ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` ++ test \"x\$thisdir\" = \"x\$file\" && thisdir=. + +- exit $EXIT_SUCCESS - ;; -- esac -- ;; -- --sysv4*MP*) -- if test -d /usr/nec ;then -- version_type=linux -- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' -- soname_spec='$libname${shared_ext}.$major' -- shlibpath_var=LD_LIBRARY_PATH -- fi -- ;; ++ # Follow symbolic links until we get to the real thisdir. ++ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` ++ while test -n \"\$file\"; do ++ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + +- prog) +- case $host in +- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; ++ # If there was a directory component, then change thisdir. ++ if test \"x\$destdir\" != \"x\$file\"; then ++ case \"\$destdir\" in ++ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; ++ *) thisdir=\"\$thisdir/\$destdir\" ;; + esac +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 +- fi ++ fi + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 +- fi ++ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` ++ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` ++ done ++" ++} ++# end: func_emit_wrapper_part1 + +- if test "$preload" = yes; then +- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && +- test "$dlopen_self_static" = unknown; then +- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." +- fi +- fi ++# func_emit_wrapper_part2 [arg=no] ++# ++# Emit the second part of a libtool wrapper script on stdout. ++# For more information, see the description associated with ++# func_emit_wrapper(), below. ++func_emit_wrapper_part2 () ++{ ++ func_emit_wrapper_part2_arg1=no ++ if test -n "$1" ; then ++ func_emit_wrapper_part2_arg1=$1 ++ fi ++ ++ $ECHO "\ ++ ++ # Usually 'no', except on cygwin/mingw when embedded into ++ # the cwrapper. ++ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 ++ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then ++ # special case for '.' ++ if test \"\$thisdir\" = \".\"; then ++ thisdir=\`pwd\` ++ fi ++ # remove .libs from thisdir ++ case \"\$thisdir\" in ++ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; ++ $objdir ) thisdir=. ;; ++ esac ++ fi + +- case $host in +- *-*-rhapsody* | *-*-darwin1.[012]) +- # On Rhapsody replace the C library is the System framework +- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` +- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` +- ;; +- esac ++ # Try to get the absolute directory name. ++ absdir=\`cd \"\$thisdir\" && pwd\` ++ test -n \"\$absdir\" && thisdir=\"\$absdir\" ++" + +- case $host in +- *darwin*) +- # Don't allow lazy linking, it breaks C++ global constructors +- if test "$tagname" = CXX ; then +- compile_command="$compile_command ${wl}-bind_at_load" +- finalize_command="$finalize_command ${wl}-bind_at_load" +- fi +- ;; +- esac ++ if test "$fast_install" = yes; then ++ $ECHO "\ ++ program=lt-'$outputname'$exeext ++ progdir=\"\$thisdir/$objdir\" + +- compile_command="$compile_command $compile_deplibs" +- finalize_command="$finalize_command $finalize_deplibs" ++ if test ! -f \"\$progdir/\$program\" || ++ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ ++ test \"X\$file\" != \"X\$progdir/\$program\"; }; then + +- if test -n "$rpath$xrpath"; then +- # If the user specified any rpath flags, then add them. +- for libdir in $rpath $xrpath; do +- # This is the magic to use -rpath. +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ;; +- esac +- done +- fi ++ file=\"\$\$-\$program\" + +- # Now hardcode the library paths +- rpath= +- hardcode_libdirs= +- for libdir in $compile_rpath $finalize_rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- rpath="$rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$perm_rpath " in +- *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; +- esac +- fi +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- case :$dllsearchpath: in +- *":$libdir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$libdir";; +- esac +- ;; +- esac +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- eval rpath=\" $hardcode_libdir_flag_spec\" +- fi +- compile_rpath="$rpath" ++ if test ! -d \"\$progdir\"; then ++ $MKDIR \"\$progdir\" ++ else ++ $RM \"\$progdir/\$file\" ++ fi" + +- rpath= +- hardcode_libdirs= +- for libdir in $finalize_rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- rpath="$rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$finalize_perm_rpath " in +- *" $libdir "*) ;; +- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; +- esac +- fi +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- eval rpath=\" $hardcode_libdir_flag_spec\" +- fi +- finalize_rpath="$rpath" ++ $ECHO "\ + +- if test -n "$libobjs" && test "$build_old_libs" = yes; then +- # Transform all the library objects into standard objects. +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ # relink executable if necessary ++ if test -n \"\$relink_command\"; then ++ if relink_command_output=\`eval \$relink_command 2>&1\`; then : ++ else ++ $ECHO \"\$relink_command_output\" >&2 ++ $RM \"\$progdir/\$file\" ++ exit 1 + fi ++ fi + +- dlsyms= +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- if test -n "$NM" && test -n "$global_symbol_pipe"; then +- dlsyms="${outputname}S.c" ++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || ++ { $RM \"\$progdir/\$program\"; ++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } ++ $RM \"\$progdir/\$file\" ++ fi" + else +- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 ++ $ECHO "\ ++ program='$outputname' ++ progdir=\"\$thisdir/$objdir\" ++" + fi +- fi + +- if test -n "$dlsyms"; then +- case $dlsyms in +- "") ;; +- *.c) +- # Discover the nlist of each of the dlfiles. +- nlist="$output_objdir/${outputname}.nm" ++ $ECHO "\ + +- $show "$rm $nlist ${nlist}S ${nlist}T" +- $run $rm "$nlist" "${nlist}S" "${nlist}T" ++ if test -f \"\$progdir/\$program\"; then" + +- # Parse the name list into a source file. +- $show "creating $output_objdir/$dlsyms" ++ # Export our shlibpath_var if we have one. ++ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then ++ $ECHO "\ ++ # Add our own library path to $shlibpath_var ++ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + +- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ ++ # Some systems cannot cope with colon-terminated $shlibpath_var ++ # The second colon is a workaround for a bug in BeOS R4 sed ++ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + +-#ifdef __cplusplus +-extern \"C\" { +-#endif ++ export $shlibpath_var ++" ++ fi + +-/* Prevent the only kind of declaration conflicts we can make. */ +-#define lt_preloaded_symbols some_other_symbol ++ # fixup the dll searchpath if we need to. ++ if test -n "$dllsearchpath"; then ++ $ECHO "\ ++ # Add the dll search path components to the executable PATH ++ PATH=$dllsearchpath:\$PATH ++" ++ fi + +-/* External symbol declarations for the compiler. */\ ++ $ECHO "\ ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ # Run the actual program with our arguments. ++" ++ case $host in ++ # Backslashes separate directories on plain windows ++ *-*-mingw | *-*-os2* | *-cegcc*) ++ $ECHO "\ ++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} + " ++ ;; + +- if test "$dlself" = yes; then +- $show "generating symbol list for \`$output'" ++ *) ++ $ECHO "\ ++ exec \"\$progdir/\$program\" \${1+\"\$@\"} ++" ++ ;; ++ esac ++ $ECHO "\ ++ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 ++ exit 1 ++ fi ++ else ++ # The program doesn't exist. ++ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 ++ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 ++ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 ++ exit 1 ++ fi ++fi\ ++" ++} ++# end: func_emit_wrapper_part2 + +- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" + +- # Add our own program objects to the symbol list. +- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- for arg in $progfiles; do +- $show "extracting global C symbols from \`$arg'" +- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" +- done - --uts4*) -- version_type=linux -- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -- soname_spec='${libname}${release}${shared_ext}$major' -- shlibpath_var=LD_LIBRARY_PATH -- ;; +- if test -n "$exclude_expsyms"; then +- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' +- $run eval '$mv "$nlist"T "$nlist"' +- fi - --*) -- dynamic_linker=no -- ;; --esac --echo "$as_me:$LINENO: result: $dynamic_linker" >&5 --echo "${ECHO_T}$dynamic_linker" >&6 --test "$dynamic_linker" = no && can_build_shared=no +- if test -n "$export_symbols_regex"; then +- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' +- $run eval '$mv "$nlist"T "$nlist"' +- fi - --echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 --echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 --hardcode_action_GCJ= --if test -n "$hardcode_libdir_flag_spec_GCJ" || \ -- test -n "$runpath_var GCJ" || \ -- test "X$hardcode_automatic_GCJ"="Xyes" ; then +- # Prepare the list of exported symbols +- if test -z "$export_symbols"; then +- export_symbols="$output_objdir/$output.exp" +- $run $rm $export_symbols +- $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* $.*$$/\1/p' "'< "$nlist" > "$export_symbols"' +- else +- $run eval "${SED} -e 's/$[][.*^$]$/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' +- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' +- $run eval 'mv "$nlist"T "$nlist"' +- fi +- fi - -- # We can hardcode non-existant directories. -- if test "$hardcode_direct_GCJ" != no && -- # If the only mechanism to avoid hardcoding is shlibpath_var, we -- # have to relink, otherwise we might link with an installed library -- # when we should be linking with a yet-to-be-installed one -- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && -- test "$hardcode_minus_L_GCJ" != no; then -- # Linking always hardcodes the temporary library directory. -- hardcode_action_GCJ=relink -- else -- # We can link without hardcoding, and we can hardcode nonexisting dirs. -- hardcode_action_GCJ=immediate -- fi --else -- # We cannot hardcode anything, or else we can only hardcode existing -- # directories. -- hardcode_action_GCJ=unsupported --fi --echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 --echo "${ECHO_T}$hardcode_action_GCJ" >&6 +- for arg in $dlprefiles; do +- $show "extracting global C symbols from \`$arg'" +- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` +- $run eval '$echo ": $name " >> "$nlist"' +- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" +- done - --if test "$hardcode_action_GCJ" = relink; then -- # Fast installation is not supported -- enable_fast_install=no --elif test "$shlibpath_overrides_runpath" = yes || -- test "$enable_shared" = no; then -- # Fast installation is not necessary -- enable_fast_install=needless --fi +- if test -z "$run"; then +- # Make sure we have at least an empty file. +- test -f "$nlist" || : > "$nlist" - --striplib= --old_striplib= --echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 --echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 --if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then -- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" -- test -z "$striplib" && striplib="$STRIP --strip-unneeded" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 --else --# FIXME - insert some real tests, host_os isn't really good enough -- case $host_os in -- darwin*) -- if test -n "$STRIP" ; then -- striplib="$STRIP -x" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -- else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- ;; -- *) -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -- ;; -- esac --fi +- if test -n "$exclude_expsyms"; then +- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T +- $mv "$nlist"T "$nlist" +- fi - --if test "x$enable_dlopen" != xyes; then -- enable_dlopen=unknown -- enable_dlopen_self=unknown -- enable_dlopen_self_static=unknown --else -- lt_cv_dlopen=no -- lt_cv_dlopen_libs= +- # Try sorting and uniquifying the output. +- if grep -v "^: " < "$nlist" | +- if sort -k 3 /dev/null 2>&1; then +- sort -k 3 +- else +- sort +2 +- fi | +- uniq > "$nlist"S; then +- : +- else +- grep -v "^: " < "$nlist" > "$nlist"S +- fi - -- case $host_os in -- beos*) -- lt_cv_dlopen="load_add_on" -- lt_cv_dlopen_libs= -- lt_cv_dlopen_self=yes -- ;; +- if test -f "$nlist"S; then +- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' +- else +- $echo '/* NONE */' >> "$output_objdir/$dlsyms" +- fi - -- mingw* | pw32*) -- lt_cv_dlopen="LoadLibrary" -- lt_cv_dlopen_libs= -- ;; +- $echo >> "$output_objdir/$dlsyms" "\ - -- cygwin*) -- lt_cv_dlopen="dlopen" -- lt_cv_dlopen_libs= -- ;; +-#undef lt_preloaded_symbols - -- darwin*) -- # if libdl is installed we need to link against it -- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 --echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 --if test "${ac_cv_lib_dl_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldl $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr void * +-#else +-# define lt_ptr char * +-# define const +-#endif ++# func_emit_wrapper [arg=no] ++# ++# Emit a libtool wrapper script on stdout. ++# Don't directly open a file because we may want to ++# incorporate the script contents within a cygwin/mingw ++# wrapper executable. Must ONLY be called from within ++# func_mode_link because it depends on a number of variables ++# set therein. ++# ++# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR ++# variable will take. If 'yes', then the emitted script ++# will assume that the directory in which it is stored is ++# the $objdir directory. This is a cygwin/mingw-specific ++# behavior. ++func_emit_wrapper () ++{ ++ func_emit_wrapper_arg1=no ++ if test -n "$1" ; then ++ func_emit_wrapper_arg1=$1 ++ fi + +-/* The mapping between symbol names and symbols. */ +-const struct { +- const char *name; +- lt_ptr address; ++ # split this up so that func_emit_cwrapperexe_src ++ # can call each part independently. ++ func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" ++ func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" + } +-lt_preloaded_symbols[] = +-{\ +-" - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" +- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" + +- $echo >> "$output_objdir/$dlsyms" "\ +- {0, (lt_ptr) 0} +-}; + +-/* This works around a problem in FreeBSD linker */ +-#ifdef FREEBSD_WORKAROUND +-static const void *lt_preloaded_setup() { +- return lt_preloaded_symbols; ++# func_to_host_path arg ++# ++# Convert paths to host format when used with build tools. ++# Intended for use with "native" mingw (where libtool itself ++# is running under the msys shell), or in the following cross- ++# build environments: ++# $build $host ++# mingw (msys) mingw [e.g. native] ++# cygwin mingw ++# *nix + wine mingw ++# where wine is equipped with the `winepath' executable. ++# In the native mingw case, the (msys) shell automatically ++# converts paths for any non-msys applications it launches, ++# but that facility isn't available from inside the cwrapper. ++# Similar accommodations are necessary for $host mingw and ++# $build cygwin. Calling this function does no harm for other ++# $host/$build combinations not listed above. ++# ++# ARG is the path (on $build) that should be converted to ++# the proper representation for $host. The result is stored ++# in $func_to_host_path_result. ++func_to_host_path () ++{ ++ func_to_host_path_result="$1" ++ if test -n "$1" ; then ++ case $host in ++ *mingw* ) ++ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' ++ case $build in ++ *mingw* ) # actually, msys ++ # awkward: cmd appends spaces to result ++ lt_sed_strip_trailing_spaces="s/[ ]*\$//" ++ func_to_host_path_tmp1=`( cmd //c echo "$1" |\ ++ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` ++ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ ++ $SED -e "$lt_sed_naive_backslashify"` ++ ;; ++ *cygwin* ) ++ func_to_host_path_tmp1=`cygpath -w "$1"` ++ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ ++ $SED -e "$lt_sed_naive_backslashify"` ++ ;; ++ * ) ++ # Unfortunately, winepath does not exit with a non-zero ++ # error code, so we are forced to check the contents of ++ # stdout. On the other hand, if the command is not ++ # found, the shell will set an exit code of 127 and print ++ # *an error message* to stdout. So we must check for both ++ # error code of zero AND non-empty stdout, which explains ++ # the odd construction: ++ func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` ++ if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then ++ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ ++ $SED -e "$lt_sed_naive_backslashify"` ++ else ++ # Allow warning below. ++ func_to_host_path_result="" ++ fi ++ ;; ++ esac ++ if test -z "$func_to_host_path_result" ; then ++ func_error "Could not determine host path corresponding to" ++ func_error " '$1'" ++ func_error "Continuing, but uninstalled executables may not work." ++ # Fallback: ++ func_to_host_path_result="$1" ++ fi ++ ;; ++ esac ++ fi + } -#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); --int --main () --{ --dlopen (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dl_dlopen=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 ++# end: func_to_host_path + +-#ifdef __cplusplus ++# func_to_host_pathlist arg ++# ++# Convert pathlists to host format when used with build tools. ++# See func_to_host_path(), above. This function supports the ++# following $build/$host combinations (but does no harm for ++# combinations not listed here): ++# $build $host ++# mingw (msys) mingw [e.g. native] ++# cygwin mingw ++# *nix + wine mingw ++# ++# Path separators are also converted from $build format to ++# $host format. If ARG begins or ends with a path separator ++# character, it is preserved (but converted to $host format) ++# on output. ++# ++# ARG is a pathlist (on $build) that should be converted to ++# the proper representation on $host. The result is stored ++# in $func_to_host_pathlist_result. ++func_to_host_pathlist () ++{ ++ func_to_host_pathlist_result="$1" ++ if test -n "$1" ; then ++ case $host in ++ *mingw* ) ++ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' ++ # Remove leading and trailing path separator characters from ++ # ARG. msys behavior is inconsistent here, cygpath turns them ++ # into '.;' and ';.', and winepath ignores them completely. ++ func_to_host_pathlist_tmp2="$1" ++ # Once set for this call, this variable should not be ++ # reassigned. It is used in tha fallback case. ++ func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ ++ $SED -e 's|^:*||' -e 's|:*$||'` ++ case $build in ++ *mingw* ) # Actually, msys. ++ # Awkward: cmd appends spaces to result. ++ lt_sed_strip_trailing_spaces="s/[ ]*\$//" ++ func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ ++ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` ++ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ ++ $SED -e "$lt_sed_naive_backslashify"` ++ ;; ++ *cygwin* ) ++ func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` ++ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ ++ $SED -e "$lt_sed_naive_backslashify"` ++ ;; ++ * ) ++ # unfortunately, winepath doesn't convert pathlists ++ func_to_host_pathlist_result="" ++ func_to_host_pathlist_oldIFS=$IFS ++ IFS=: ++ for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do ++ IFS=$func_to_host_pathlist_oldIFS ++ if test -n "$func_to_host_pathlist_f" ; then ++ func_to_host_path "$func_to_host_pathlist_f" ++ if test -n "$func_to_host_path_result" ; then ++ if test -z "$func_to_host_pathlist_result" ; then ++ func_to_host_pathlist_result="$func_to_host_path_result" ++ else ++ func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" ++ fi ++ fi ++ fi ++ IFS=: ++ done ++ IFS=$func_to_host_pathlist_oldIFS ++ ;; ++ esac ++ if test -z "$func_to_host_pathlist_result" ; then ++ func_error "Could not determine the host path(s) corresponding to" ++ func_error " '$1'" ++ func_error "Continuing, but uninstalled executables may not work." ++ # Fallback. This may break if $1 contains DOS-style drive ++ # specifications. The fix is not to complicate the expression ++ # below, but for the user to provide a working wine installation ++ # with winepath so that path translation in the cross-to-mingw ++ # case works properly. ++ lt_replace_pathsep_nix_to_dos="s|:|;|g" ++ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ ++ $SED -e "$lt_replace_pathsep_nix_to_dos"` ++ fi ++ # Now, add the leading and trailing path separators back ++ case "$1" in ++ :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" ++ ;; ++ esac ++ case "$1" in ++ *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" ++ ;; ++ esac ++ ;; ++ esac ++ fi + } +-#endif\ +-" +- fi - --ac_cv_lib_dl_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 --if test $ac_cv_lib_dl_dlopen = yes; then -- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" --else +- pic_flag_for_symtable= +- case $host in +- # compiling the symbol table file with pic_flag works around +- # a FreeBSD bug that causes programs to crash when -lm is +- # linked before any other PIC object. But we must not use +- # pic_flag when linking with -static. The problem exists in +- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. +- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) +- case "$compile_command " in +- *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; +- esac;; +- *-*-hpux*) +- case "$compile_command " in +- *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag";; +- esac +- esac - -- lt_cv_dlopen="dyld" -- lt_cv_dlopen_libs= -- lt_cv_dlopen_self=yes +- # Now compile the dynamic symbol file. +- $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" +- $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - --fi +- # Clean up the generated files. +- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" +- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" - -- ;; +- # Transform the symbol file into the correct name. +- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` +- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` +- ;; +- *) +- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- else +- # We keep going just in case the user didn't refer to +- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe +- # really was required. - -- *) -- echo "$as_me:$LINENO: checking for shl_load" >&5 --echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 --if test "${ac_cv_func_shl_load+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --/* Define shl_load to an innocuous variant, in case declares shl_load. -- For example, HP-UX 11i declares gettimeofday. */ --#define shl_load innocuous_shl_load +- # Nullify the symbol file. +- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` +- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` +- fi +- +- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then +- # Replace the output file specification. +- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` +- link_command="$compile_command$compile_rpath" +- +- # We have no uninstalled library dependencies, so finalize right now. +- $show "$link_command" +- $run eval "$link_command" +- status=$? - --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char shl_load (); below. -- Prefer to if __STDC__ is defined, since -- exists even on freestanding compilers. */ +- # Delete the generated files. +- if test -n "$dlsyms"; then +- $show "$rm $output_objdir/${outputname}S.${objext}" +- $run $rm "$output_objdir/${outputname}S.${objext}" +- fi - --#ifdef __STDC__ --# include --#else --# include --#endif +- exit $status +- fi - --#undef shl_load +- if test -n "$shlibpath_var"; then +- # We should set the shlibpath_var +- rpath= +- for dir in $temp_rpath; do +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) +- # Absolute path. +- rpath="$rpath$dir:" +- ;; +- *) +- # Relative path: add a thisdir entry. +- rpath="$rpath\$thisdir/$dir:" +- ;; +- esac +- done +- temp_rpath="$rpath" +- fi - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --{ --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char shl_load (); --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub_shl_load) || defined (__stub___shl_load) --choke me --#else --char (*f) () = shl_load; --#endif --#ifdef __cplusplus --} --#endif +- if test -n "$compile_shlibpath$finalize_shlibpath"; then +- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" +- fi +- if test -n "$finalize_shlibpath"; then +- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" +- fi - --int --main () --{ --return f != shl_load; -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_func_shl_load=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +- compile_var= +- finalize_var= +- if test -n "$runpath_var"; then +- if test -n "$perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $perm_rpath; do +- rpath="$rpath$dir:" +- done +- compile_var="$runpath_var=\"$rpath\$$runpath_var\" " +- fi +- if test -n "$finalize_perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $finalize_perm_rpath; do +- rpath="$rpath$dir:" +- done +- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " +- fi +- fi - --ac_cv_func_shl_load=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 --echo "${ECHO_T}$ac_cv_func_shl_load" >&6 --if test $ac_cv_func_shl_load = yes; then -- lt_cv_dlopen="shl_load" --else -- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 --echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 --if test "${ac_cv_lib_dld_shl_load+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldld $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ +- if test "$no_install" = yes; then +- # We don't need to create a wrapper script. +- link_command="$compile_var$compile_command$compile_rpath" +- # Replace the output file specification. +- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` +- # Delete the old output file. +- $run $rm $output +- # Link the executable and exit +- $show "$link_command" +- $run eval "$link_command" || exit $? +- exit $EXIT_SUCCESS +- fi - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char shl_load (); --int --main () --{ --shl_load (); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dld_shl_load=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +- if test "$hardcode_action" = relink; then +- # Fast installation is not supported +- link_command="$compile_var$compile_command$compile_rpath" +- relink_command="$finalize_var$finalize_command$finalize_rpath" - --ac_cv_lib_dld_shl_load=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 --echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 --if test $ac_cv_lib_dld_shl_load = yes; then -- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" --else -- echo "$as_me:$LINENO: checking for dlopen" >&5 --echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 --if test "${ac_cv_func_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --/* Define dlopen to an innocuous variant, in case declares dlopen. -- For example, HP-UX 11i declares gettimeofday. */ --#define dlopen innocuous_dlopen +- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 +- $echo "$modename: \`$output' will be relinked during installation" 1>&2 +- else +- if test "$fast_install" != no; then +- link_command="$finalize_var$compile_command$finalize_rpath" +- if test "$fast_install" = yes; then +- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` +- else +- # fast_install is set to needless +- relink_command= +- fi +- else +- link_command="$compile_var$compile_command$compile_rpath" +- relink_command="$finalize_var$finalize_command$finalize_rpath" +- fi +- fi - --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char dlopen (); below. -- Prefer to if __STDC__ is defined, since -- exists even on freestanding compilers. */ +- # Replace the output file specification. +- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - --#ifdef __STDC__ --# include --#else --# include --#endif +- # Delete the old output files. +- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname - --#undef dlopen +- $show "$link_command" +- $run eval "$link_command" || exit $? - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --{ --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub_dlopen) || defined (__stub___dlopen) --choke me --#else --char (*f) () = dlopen; --#endif --#ifdef __cplusplus --} --#endif +- # Now create the wrapper script. +- $show "creating $output" - --int --main () --{ --return f != dlopen; -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_func_dlopen=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +- # Quote the relink command for shipping. +- if test -n "$relink_command"; then +- # Preserve any variables that may affect compiler behavior +- for var in $variables_saved_for_relink; do +- if eval test -z \"\${$var+set}\"; then +- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" +- elif eval var_value=\$$var; test -z "$var_value"; then +- relink_command="$var=; export $var; $relink_command" +- else +- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` +- relink_command="$var=\"$var_value\"; export $var; $relink_command" +- fi +- done +- relink_command="(cd `pwd`; $relink_command)" +- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` +- fi - --ac_cv_func_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 --echo "${ECHO_T}$ac_cv_func_dlopen" >&6 --if test $ac_cv_func_dlopen = yes; then -- lt_cv_dlopen="dlopen" --else -- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 --echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 --if test "${ac_cv_lib_dl_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldl $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ +- # Quote $echo for shipping. +- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then +- case $progpath in +- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; +- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; +- esac +- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` +- else +- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` +- fi - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" +- # Only actually do things if our run command is non-null. +- if test -z "$run"; then +- # win32 will think the script is a binary if it has +- # a .exe suffix, so we strip it off here. +- case $output in +- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; +- esac +- # test for cygwin because mv fails w/o .exe extensions +- case $host in +- *cygwin*) +- exeext=.exe +- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; +- *) exeext= ;; +- esac +- case $host in +- *cygwin* | *mingw* ) +- cwrappersource=`$echo ${objdir}/lt-${output}.c` +- cwrapper=`$echo ${output}.exe` +- $rm $cwrappersource $cwrapper +- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 ++# end: func_to_host_pathlist + +- cat > $cwrappersource <> $cwrappersource<<"EOF" ++ cat <<"EOF" + #include + #include +-#include ++#ifdef _MSC_VER ++# include ++# include ++# include ++# define setmode _setmode ++#else ++# include ++# include ++# ifdef __CYGWIN__ ++# include ++# define HAVE_SETENV ++# ifdef __STRICT_ANSI__ ++char *realpath (const char *, char *); ++int putenv (char *); ++int setenv (const char *, const char *, int); ++# endif ++# endif ++#endif + #include + #include + #include ++#include ++#include ++#include ++#include ++#include + + #if defined(PATH_MAX) + # define LT_PATHMAX PATH_MAX +@@ -4618,154 +3185,657 @@ EOF + # define LT_PATHMAX 1024 + #endif + ++#ifndef S_IXOTH ++# define S_IXOTH 0 ++#endif ++#ifndef S_IXGRP ++# define S_IXGRP 0 ++#endif ++ ++#ifdef _MSC_VER ++# define S_IXUSR _S_IEXEC ++# define stat _stat ++# ifndef _INTPTR_T_DEFINED ++# define intptr_t int ++# endif ++#endif ++ + #ifndef DIR_SEPARATOR +-#define DIR_SEPARATOR '/' ++# define DIR_SEPARATOR '/' ++# define PATH_SEPARATOR ':' + #endif + + #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +-#define HAVE_DOS_BASED_FILE_SYSTEM +-#ifndef DIR_SEPARATOR_2 +-#define DIR_SEPARATOR_2 '\\' -#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); ++# define HAVE_DOS_BASED_FILE_SYSTEM ++# define FOPEN_WB "wb" ++# ifndef DIR_SEPARATOR_2 ++# define DIR_SEPARATOR_2 '\\' ++# endif ++# ifndef PATH_SEPARATOR_2 ++# define PATH_SEPARATOR_2 ';' ++# endif + #endif + + #ifndef DIR_SEPARATOR_2 + # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) + #else /* DIR_SEPARATOR_2 */ + # define IS_DIR_SEPARATOR(ch) \ +- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) ++ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) + #endif /* DIR_SEPARATOR_2 */ + ++#ifndef PATH_SEPARATOR_2 ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) ++#else /* PATH_SEPARATOR_2 */ ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) ++#endif /* PATH_SEPARATOR_2 */ ++ ++#ifdef __CYGWIN__ ++# define FOPEN_WB "wb" ++#endif ++ ++#ifndef FOPEN_WB ++# define FOPEN_WB "w" ++#endif ++#ifndef _O_BINARY ++# define _O_BINARY 0 ++#endif ++ + #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) + #define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ + } while (0) + ++#undef LTWRAPPER_DEBUGPRINTF ++#if defined DEBUGWRAPPER ++# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args ++static void ++ltwrapper_debugprintf (const char *fmt, ...) ++{ ++ va_list args; ++ va_start (args, fmt); ++ (void) vfprintf (stderr, fmt, args); ++ va_end (args); ++} ++#else ++# define LTWRAPPER_DEBUGPRINTF(args) ++#endif ++ + const char *program_name = NULL; + +-void * xmalloc (size_t num); +-char * xstrdup (const char *string); +-char * basename (const char *name); +-char * fnqualify(const char *path); +-char * strendzap(char *str, const char *pat); ++void *xmalloc (size_t num); ++char *xstrdup (const char *string); ++const char *base_name (const char *name); ++char *find_executable (const char *wrapper); ++char *chase_symlinks (const char *pathspec); ++int make_executable (const char *path); ++int check_executable (const char *path); ++char *strendzap (char *str, const char *pat); + void lt_fatal (const char *message, ...); ++void lt_setenv (const char *name, const char *value); ++char *lt_extend_str (const char *orig_value, const char *add, int to_end); ++void lt_opt_process_env_set (const char *arg); ++void lt_opt_process_env_prepend (const char *arg); ++void lt_opt_process_env_append (const char *arg); ++int lt_split_name_value (const char *arg, char** name, char** value); ++void lt_update_exe_path (const char *name, const char *value); ++void lt_update_lib_path (const char *name, const char *value); + -int --main () +-main (int argc, char *argv[]) -{ --dlopen (); -- ; -- return 0; +- char **newargz; +- int i; ++static const char *script_text_part1 = ++EOF ++ ++ func_emit_wrapper_part1 yes | ++ $SED -e 's/$[\\"]$/\\\1/g' \ ++ -e 's/^/ "/' -e 's/$/\\n"/' ++ echo ";" ++ cat <> $cwrappersource <> $cwrappersource <<"EOF" +- newargz[1] = fnqualify(argv[0]); +- /* we know the script has the same name, without the .exe */ +- /* so make sure newargz[1] doesn't end in .exe */ +- strendzap(newargz[1],".exe"); +- for (i = 1; i < argc; i++) +- newargz[i+1] = xstrdup(argv[i]); +- newargz[argc+1] = NULL; ++ if test -n "$dllsearchpath"; then ++ func_to_host_pathlist "$dllsearchpath:" ++ cat <> $cwrappersource <> $cwrappersource <<"EOF" -} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dl_dlopen=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --ac_cv_lib_dl_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 --if test $ac_cv_lib_dl_dlopen = yes; then -- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" --else -- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 --echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 --if test "${ac_cv_lib_svld_dlopen+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-lsvld $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ -- --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dlopen (); --int --main () + +-void * +-xmalloc (size_t num) -{ --dlopen (); -- ; -- return 0; +- void * p = (void *) malloc (num); +- if (!p) +- lt_fatal ("Memory exhausted"); ++ cat <<"EOF" + +- return p; -} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_svld_dlopen=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --ac_cv_lib_svld_dlopen=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS --fi --echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 --if test $ac_cv_lib_svld_dlopen = yes; then -- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" --else -- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 --echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 --if test "${ac_cv_lib_dld_dld_link+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_check_lib_save_LIBS=$LIBS --LIBS="-ldld $LIBS" --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ -- --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char dld_link (); --int --main () ++#define LTWRAPPER_OPTION_PREFIX "--lt-" ++#define LTWRAPPER_OPTION_PREFIX_LENGTH 5 + +-char * +-xstrdup (const char *string) -{ --dld_link (); -- ; -- return 0; +- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +-; -} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_lib_dld_dld_link=yes -+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then -+ case $lt_prog_compiler_pic_CXX in -+ "" | " "*) ;; -+ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; -+ esac - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ lt_prog_compiler_pic_CXX= -+ lt_prog_compiler_can_build_shared_CXX=no -+fi ++static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH; ++static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; + +-char * +-basename (const char *name) +-{ +- const char *base; ++static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; + +-#if defined (HAVE_DOS_BASED_FILE_SYSTEM) +- /* Skip over the disk name in MSDOS pathnames. */ +- if (isalpha (name[0]) && name[1] == ':') +- name += 2; +-#endif ++static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7; ++static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set"; ++ /* argument is putenv-style "foo=bar", value of foo is set to bar */ + +- for (base = name; *name; name++) +- if (IS_DIR_SEPARATOR (*name)) ++static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11; ++static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend"; ++ /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */ ++ ++static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10; ++static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append"; ++ /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */ ++ ++int ++main (int argc, char *argv[]) ++{ ++ char **newargz; ++ int newargc; ++ char *tmp_pathspec; ++ char *actual_cwrapper_path; ++ char *actual_cwrapper_name; ++ char *target_name; ++ char *lt_argv_zero; ++ intptr_t rval = 127; ++ ++ int i; ++ ++ program_name = (char *) xstrdup (base_name (argv[0])); ++ LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); ++ LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); ++ ++ /* very simple arg parsing; don't want to rely on getopt */ ++ for (i = 1; i < argc; i++) ++ { ++ if (strcmp (argv[i], dumpscript_opt) == 0) ++ { ++EOF ++ case "$host" in ++ *mingw* | *cygwin* ) ++ # make stdout use "unix" line endings ++ echo " setmode(1,_O_BINARY);" ++ ;; ++ esac ++ ++ cat <<"EOF" ++ printf ("%s", script_text_part1); ++ printf ("%s", script_text_part2); ++ return 0; ++ } ++ } ++ ++ newargz = XMALLOC (char *, argc + 1); ++ tmp_pathspec = find_executable (argv[0]); ++ if (tmp_pathspec == NULL) ++ lt_fatal ("Couldn't find %s", argv[0]); ++ LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", ++ tmp_pathspec)); ++ ++ actual_cwrapper_path = chase_symlinks (tmp_pathspec); ++ LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", ++ actual_cwrapper_path)); ++ XFREE (tmp_pathspec); ++ ++ actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path)); ++ strendzap (actual_cwrapper_path, actual_cwrapper_name); ++ ++ /* wrapper name transforms */ ++ strendzap (actual_cwrapper_name, ".exe"); ++ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1); ++ XFREE (actual_cwrapper_name); ++ actual_cwrapper_name = tmp_pathspec; ++ tmp_pathspec = 0; ++ ++ /* target_name transforms -- use actual target program name; might have lt- prefix */ ++ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME)); ++ strendzap (target_name, ".exe"); ++ tmp_pathspec = lt_extend_str (target_name, ".exe", 1); ++ XFREE (target_name); ++ target_name = tmp_pathspec; ++ tmp_pathspec = 0; ++ ++ LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n", ++ target_name)); ++EOF ++ ++ cat <"))); ++ for (i = 0; i < newargc; i++) ++ { ++ LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : ""))); ++ } ++ ++EOF ++ ++ case $host_os in ++ mingw*) ++ cat <<"EOF" ++ /* execv doesn't actually work on mingw as expected on unix */ ++ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); ++ if (rval == -1) ++ { ++ /* failed to start process */ ++ LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); ++ return 127; ++ } ++ return rval; ++EOF ++ ;; ++ *) ++ cat <<"EOF" ++ execv (lt_argv_zero, newargz); ++ return rval; /* =127, but avoids unused variable warning */ ++EOF ++ ;; ++ esac ++ ++ cat <<"EOF" ++} ++ ++void * ++xmalloc (size_t num) ++{ ++ void *p = (void *) malloc (num); ++ if (!p) ++ lt_fatal ("Memory exhausted"); ++ ++ return p; ++} ++ ++char * ++xstrdup (const char *string) ++{ ++ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), ++ string) : NULL; ++} ++ ++const char * ++base_name (const char *name) ++{ ++ const char *base; ++ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ /* Skip over the disk name in MSDOS pathnames. */ ++ if (isalpha ((unsigned char) name[0]) && name[1] == ':') ++ name += 2; ++#endif ++ ++ for (base = name; *name; name++) ++ if (IS_DIR_SEPARATOR (*name)) + base = name + 1; +- return (char *) base; ++ return base; ++} ++ ++int ++check_executable (const char *path) ++{ ++ struct stat st; ++ ++ LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", ++ path ? (*path ? path : "EMPTY!") : "NULL!")); ++ if ((!path) || (!*path)) ++ return 0; ++ ++ if ((stat (path, &st) >= 0) ++ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) ++ return 1; ++ else ++ return 0; + } --ac_cv_lib_dld_dld_link=no - fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --LIBS=$ac_check_lib_save_LIBS ++int ++make_executable (const char *path) ++{ ++ int rval = 0; ++ struct stat st; ++ ++ LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", ++ path ? (*path ? path : "EMPTY!") : "NULL!")); ++ if ((!path) || (!*path)) ++ return 0; ++ ++ if (stat (path, &st) >= 0) ++ { ++ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); ++ } ++ return rval; ++} ++ ++/* Searches for the full path of the wrapper. Returns ++ newly allocated full path name if found, NULL otherwise ++ Does not chase symlinks, even on platforms that support them. ++*/ + char * +-fnqualify(const char *path) ++find_executable (const char *wrapper) + { +- size_t size; +- char *p; ++ int has_slash = 0; ++ const char *p; ++ const char *p_next; ++ /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; ++ int tmp_len; ++ char *concat_name; ++ ++ LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", ++ wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); + +- assert(path != NULL); ++ if ((wrapper == NULL) || (*wrapper == '\0')) ++ return NULL; + +- /* Is it qualified already? */ ++ /* Absolute path? */ + #if defined (HAVE_DOS_BASED_FILE_SYSTEM) +- if (isalpha (path[0]) && path[1] == ':') +- return xstrdup (path); ++ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++ else ++ { ++#endif ++ if (IS_DIR_SEPARATOR (wrapper[0])) ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ } + #endif +- if (IS_DIR_SEPARATOR (path[0])) +- return xstrdup (path); + +- /* prepend the current directory */ +- /* doesn't handle '~' */ ++ for (p = wrapper; *p; p++) ++ if (*p == '/') ++ { ++ has_slash = 1; ++ break; ++ } ++ if (!has_slash) ++ { ++ /* no slashes; search PATH */ ++ const char *path = getenv ("PATH"); ++ if (path != NULL) ++ { ++ for (p = path; *p; p = p_next) ++ { ++ const char *q; ++ size_t p_len; ++ for (q = p; *q; q++) ++ if (IS_PATH_SEPARATOR (*q)) ++ break; ++ p_len = q - p; ++ p_next = (*q == '\0' ? q : q + 1); ++ if (p_len == 0) ++ { ++ /* empty path: current directory */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen (tmp); ++ concat_name = ++ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ } ++ else ++ { ++ concat_name = ++ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, p, p_len); ++ concat_name[p_len] = '/'; ++ strcpy (concat_name + p_len + 1, wrapper); ++ } ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++ } ++ /* not found in PATH; assume curdir */ ++ } ++ /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); +- size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */ +- p = XMALLOC(char, size); +- sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path); +- return p; ++ tmp_len = strlen (tmp); ++ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ return NULL; ++} ++ ++char * ++chase_symlinks (const char *pathspec) ++{ ++#ifndef S_ISLNK ++ return xstrdup (pathspec); ++#else ++ char buf[LT_PATHMAX]; ++ struct stat s; ++ char *tmp_pathspec = xstrdup (pathspec); ++ char *p; ++ int has_symlinks = 0; ++ while (strlen (tmp_pathspec) && !has_symlinks) ++ { ++ LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", ++ tmp_pathspec)); ++ if (lstat (tmp_pathspec, &s) == 0) ++ { ++ if (S_ISLNK (s.st_mode) != 0) ++ { ++ has_symlinks = 1; ++ break; ++ } ++ ++ /* search backwards for last DIR_SEPARATOR */ ++ p = tmp_pathspec + strlen (tmp_pathspec) - 1; ++ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) ++ p--; ++ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) ++ { ++ /* no more DIR_SEPARATORS left */ ++ break; ++ } ++ *p = '\0'; ++ } ++ else ++ { ++ char *errstr = strerror (errno); ++ lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); ++ } ++ } ++ XFREE (tmp_pathspec); ++ ++ if (!has_symlinks) ++ { ++ return xstrdup (pathspec); ++ } ++ ++ tmp_pathspec = realpath (pathspec, buf); ++ if (tmp_pathspec == 0) ++ { ++ lt_fatal ("Could not follow symlinks for %s", pathspec); ++ } ++ return xstrdup (tmp_pathspec); ++#endif + } + + char * +-strendzap(char *str, const char *pat) ++strendzap (char *str, const char *pat) + { + size_t len, patlen; + +- assert(str != NULL); +- assert(pat != NULL); ++ assert (str != NULL); ++ assert (pat != NULL); + +- len = strlen(str); +- patlen = strlen(pat); ++ len = strlen (str); ++ patlen = strlen (pat); + + if (patlen <= len) +- { +- str += len - patlen; +- if (strcmp(str, pat) == 0) +- *str = '\0'; +- } ++ { ++ str += len - patlen; ++ if (strcmp (str, pat) == 0) ++ *str = '\0'; ++ } + return str; + } + + static void +-lt_error_core (int exit_status, const char * mode, +- const char * message, va_list ap) ++lt_error_core (int exit_status, const char *mode, ++ const char *message, va_list ap) + { + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); +@@ -4783,1230 +3853,4351 @@ lt_fatal (const char *message, ...) + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); + } ++ ++void ++lt_setenv (const char *name, const char *value) ++{ ++ LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", ++ (name ? name : ""), ++ (value ? value : ""))); ++ { ++#ifdef HAVE_SETENV ++ /* always make a copy, for consistency with !HAVE_SETENV */ ++ char *str = xstrdup (value); ++ setenv (name, str, 1); ++#else ++ int len = strlen (name) + 1 + strlen (value) + 1; ++ char *str = XMALLOC (char, len); ++ sprintf (str, "%s=%s", name, value); ++ if (putenv (str) != EXIT_SUCCESS) ++ { ++ XFREE (str); ++ } ++#endif ++ } ++} ++ ++char * ++lt_extend_str (const char *orig_value, const char *add, int to_end) ++{ ++ char *new_value; ++ if (orig_value && *orig_value) ++ { ++ int orig_value_len = strlen (orig_value); ++ int add_len = strlen (add); ++ new_value = XMALLOC (char, add_len + orig_value_len + 1); ++ if (to_end) ++ { ++ strcpy (new_value, orig_value); ++ strcpy (new_value + orig_value_len, add); ++ } ++ else ++ { ++ strcpy (new_value, add); ++ strcpy (new_value + add_len, orig_value); ++ } ++ } ++ else ++ { ++ new_value = xstrdup (add); ++ } ++ return new_value; ++} ++ ++int ++lt_split_name_value (const char *arg, char** name, char** value) ++{ ++ const char *p; ++ int len; ++ if (!arg || !*arg) ++ return 1; ++ ++ p = strchr (arg, (int)'='); ++ ++ if (!p) ++ return 1; ++ ++ *value = xstrdup (++p); ++ ++ len = strlen (arg) - strlen (*value); ++ *name = XMALLOC (char, len); ++ strncpy (*name, arg, len-1); ++ (*name)[len - 1] = '\0'; ++ ++ return 0; ++} ++ ++void ++lt_opt_process_env_set (const char *arg) ++{ ++ char *name = NULL; ++ char *value = NULL; ++ ++ if (lt_split_name_value (arg, &name, &value) != 0) ++ { ++ XFREE (name); ++ XFREE (value); ++ lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); ++ } ++ ++ lt_setenv (name, value); ++ XFREE (name); ++ XFREE (value); ++} ++ ++void ++lt_opt_process_env_prepend (const char *arg) ++{ ++ char *name = NULL; ++ char *value = NULL; ++ char *new_value = NULL; ++ ++ if (lt_split_name_value (arg, &name, &value) != 0) ++ { ++ XFREE (name); ++ XFREE (value); ++ lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); ++ } ++ ++ new_value = lt_extend_str (getenv (name), value, 0); ++ lt_setenv (name, new_value); ++ XFREE (new_value); ++ XFREE (name); ++ XFREE (value); ++} ++ ++void ++lt_opt_process_env_append (const char *arg) ++{ ++ char *name = NULL; ++ char *value = NULL; ++ char *new_value = NULL; ++ ++ if (lt_split_name_value (arg, &name, &value) != 0) ++ { ++ XFREE (name); ++ XFREE (value); ++ lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); ++ } ++ ++ new_value = lt_extend_str (getenv (name), value, 1); ++ lt_setenv (name, new_value); ++ XFREE (new_value); ++ XFREE (name); ++ XFREE (value); ++} ++ ++void ++lt_update_exe_path (const char *name, const char *value) ++{ ++ LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", ++ (name ? name : ""), ++ (value ? value : ""))); ++ ++ if (name && *name && value && *value) ++ { ++ char *new_value = lt_extend_str (getenv (name), value, 0); ++ /* some systems can't cope with a ':'-terminated path #' */ ++ int len = strlen (new_value); ++ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) ++ { ++ new_value[len-1] = '\0'; ++ } ++ lt_setenv (name, new_value); ++ XFREE (new_value); ++ } ++} ++ ++void ++lt_update_lib_path (const char *name, const char *value) ++{ ++ LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", ++ (name ? name : ""), ++ (value ? value : ""))); ++ ++ if (name && *name && value && *value) ++ { ++ char *new_value = lt_extend_str (getenv (name), value, 0); ++ lt_setenv (name, new_value); ++ XFREE (new_value); ++ } ++} ++ ++ + EOF +- # we should really use a build-platform specific compiler +- # here, but OTOH, the wrappers (shell script and this C one) +- # are only useful if you want to execute the "real" binary. +- # Since the "real" binary is built for $host, then this +- # wrapper might as well be built for $host, too. +- $run $LTCC -s -o $cwrapper $cwrappersource ++} ++# end: func_emit_cwrapperexe_src ++ ++# func_mode_link arg... ++func_mode_link () ++{ ++ $opt_debug ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) ++ # It is impossible to link a dll without this setting, and ++ # we shouldn't force the makefile maintainer to figure out ++ # which system we are compiling for in order to pass an extra ++ # flag for every libtool invocation. ++ # allow_undefined=no ++ ++ # FIXME: Unfortunately, there are problems with the above when trying ++ # to make a dll which has undefined symbols, in which case not ++ # even a static library is built. For now, we need to specify ++ # -no-undefined on the libtool link line when we can be certain ++ # that all symbols are satisfied, otherwise we get a static library. ++ allow_undefined=yes ++ ;; ++ *) ++ allow_undefined=yes ++ ;; ++ esac ++ libtool_args=$nonopt ++ base_compile="$nonopt $@" ++ compile_command=$nonopt ++ finalize_command=$nonopt ++ ++ compile_rpath= ++ finalize_rpath= ++ compile_shlibpath= ++ finalize_shlibpath= ++ convenience= ++ old_convenience= ++ deplibs= ++ old_deplibs= ++ compiler_flags= ++ linker_flags= ++ dllsearchpath= ++ lib_search_path=`pwd` ++ inst_prefix_dir= ++ new_inherited_linker_flags= ++ ++ avoid_version=no ++ dlfiles= ++ dlprefiles= ++ dlself=no ++ export_dynamic=no ++ export_symbols= ++ export_symbols_regex= ++ generated= ++ libobjs= ++ ltlibs= ++ module=no ++ no_install=no ++ objs= ++ non_pic_objects= ++ precious_files_regex= ++ prefer_static_libs=no ++ preload=no ++ prev= ++ prevarg= ++ release= ++ rpath= ++ xrpath= ++ perm_rpath= ++ temp_rpath= ++ thread_safe=no ++ vinfo= ++ vinfo_number=no ++ weak_libs= ++ single_module="${wl}-single_module" ++ func_infer_tag $base_compile ++ ++ # We need to know -static, to get the right output filenames. ++ for arg ++ do ++ case $arg in ++ -shared) ++ test "$build_libtool_libs" != yes && \ ++ func_fatal_configuration "can not build a shared library" ++ build_old_libs=no ++ break ++ ;; ++ -all-static | -static | -static-libtool-libs) ++ case $arg in ++ -all-static) ++ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then ++ func_warning "complete static linking is impossible in this configuration" ++ fi ++ if test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static ++ fi ++ prefer_static_libs=yes ++ ;; ++ -static) ++ if test -z "$pic_flag" && test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static ++ fi ++ prefer_static_libs=built ++ ;; ++ -static-libtool-libs) ++ if test -z "$pic_flag" && test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static ++ fi ++ prefer_static_libs=yes ++ ;; ++ esac ++ build_libtool_libs=no ++ build_old_libs=yes ++ break ++ ;; ++ esac ++ done ++ ++ # See if our shared archives depend on static archives. ++ test -n "$old_archive_from_new_cmds" && build_old_libs=yes ++ ++ # Go through the arguments, transforming them on the way. ++ while test "$#" -gt 0; do ++ arg="$1" ++ shift ++ func_quote_for_eval "$arg" ++ qarg=$func_quote_for_eval_unquoted_result ++ func_append libtool_args " $func_quote_for_eval_result" ++ ++ # If the previous option needs an argument, assign it. ++ if test -n "$prev"; then ++ case $prev in ++ output) ++ func_append compile_command " @OUTPUT@" ++ func_append finalize_command " @OUTPUT@" ++ ;; ++ esac ++ ++ case $prev in ++ dlfiles|dlprefiles) ++ if test "$preload" = no; then ++ # Add the symbol object into the linking commands. ++ func_append compile_command " @SYMFILE@" ++ func_append finalize_command " @SYMFILE@" ++ preload=yes ++ fi ++ case $arg in ++ *.la | *.lo) ;; # We handle these cases below. ++ force) ++ if test "$dlself" = no; then ++ dlself=needless ++ export_dynamic=yes ++ fi ++ prev= ++ continue ++ ;; ++ self) ++ if test "$prev" = dlprefiles; then ++ dlself=yes ++ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then ++ dlself=yes ++ else ++ dlself=needless ++ export_dynamic=yes ++ fi ++ prev= ++ continue ++ ;; ++ *) ++ if test "$prev" = dlfiles; then ++ dlfiles="$dlfiles $arg" ++ else ++ dlprefiles="$dlprefiles $arg" ++ fi ++ prev= ++ continue ++ ;; ++ esac ++ ;; ++ expsyms) ++ export_symbols="$arg" ++ test -f "$arg" \ ++ || func_fatal_error "symbol file \`$arg' does not exist" ++ prev= ++ continue ++ ;; ++ expsyms_regex) ++ export_symbols_regex="$arg" ++ prev= ++ continue ++ ;; ++ framework) ++ case $host in ++ *-*-darwin*) ++ case "$deplibs " in ++ *" $qarg.ltframework "*) ;; ++ *) deplibs="$deplibs $qarg.ltframework" # this is fixed later ++ ;; ++ esac ++ ;; ++ esac ++ prev= ++ continue ++ ;; ++ inst_prefix) ++ inst_prefix_dir="$arg" ++ prev= ++ continue ++ ;; ++ objectlist) ++ if test -f "$arg"; then ++ save_arg=$arg ++ moreargs= ++ for fil in `cat "$save_arg"` ++ do ++# moreargs="$moreargs $fil" ++ arg=$fil ++ # A libtool-controlled object. ++ ++ # Check to see that this really is a libtool object. ++ if func_lalib_unsafe_p "$arg"; then ++ pic_object= ++ non_pic_object= ++ ++ # Read the .lo file ++ func_source "$arg" ++ ++ if test -z "$pic_object" || ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && ++ test "$non_pic_object" = none; then ++ func_fatal_error "cannot find name of object for \`$arg'" ++ fi ++ ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" ++ ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" ++ ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi ++ ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi ++ ++ # A PIC object. ++ func_append libobjs " $pic_object" ++ arg="$pic_object" ++ fi ++ ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ func_append non_pic_objects " $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if $opt_dry_run; then ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" ++ ++ func_lo2o "$arg" ++ pic_object=$xdir$objdir/$func_lo2o_result ++ non_pic_object=$xdir$func_lo2o_result ++ func_append libobjs " $pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ else ++ func_fatal_error "\`$arg' is not a valid libtool object" ++ fi ++ fi ++ done ++ else ++ func_fatal_error "link input file \`$arg' does not exist" ++ fi ++ arg=$save_arg ++ prev= ++ continue ++ ;; ++ precious_regex) ++ precious_files_regex="$arg" ++ prev= ++ continue ++ ;; ++ release) ++ release="-$arg" ++ prev= ++ continue ++ ;; ++ rpath | xrpath) ++ # We need an absolute path. ++ case $arg in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ func_fatal_error "only absolute run-paths are allowed" ++ ;; ++ esac ++ if test "$prev" = rpath; then ++ case "$rpath " in ++ *" $arg "*) ;; ++ *) rpath="$rpath $arg" ;; ++ esac ++ else ++ case "$xrpath " in ++ *" $arg "*) ;; ++ *) xrpath="$xrpath $arg" ;; ++ esac ++ fi ++ prev= ++ continue ++ ;; ++ shrext) ++ shrext_cmds="$arg" ++ prev= ++ continue ++ ;; ++ weak) ++ weak_libs="$weak_libs $arg" ++ prev= ++ continue ++ ;; ++ xcclinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ func_append compile_command " $qarg" ++ func_append finalize_command " $qarg" ++ continue ++ ;; ++ xcompiler) ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ func_append compile_command " $qarg" ++ func_append finalize_command " $qarg" ++ continue ++ ;; ++ xlinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $wl$qarg" ++ prev= ++ func_append compile_command " $wl$qarg" ++ func_append finalize_command " $wl$qarg" ++ continue ++ ;; ++ *) ++ eval "$prev=\"\$arg\"" ++ prev= ++ continue ++ ;; ++ esac ++ fi # test -n "$prev" ++ ++ prevarg="$arg" ++ ++ case $arg in ++ -all-static) ++ if test -n "$link_static_flag"; then ++ # See comment for -static flag below, for more details. ++ func_append compile_command " $link_static_flag" ++ func_append finalize_command " $link_static_flag" ++ fi ++ continue ++ ;; ++ ++ -allow-undefined) ++ # FIXME: remove this flag sometime in the future. ++ func_fatal_error "\`-allow-undefined' must not be used because it is the default" ++ ;; ++ ++ -avoid-version) ++ avoid_version=yes ++ continue ++ ;; ++ ++ -dlopen) ++ prev=dlfiles ++ continue ++ ;; ++ ++ -dlpreopen) ++ prev=dlprefiles ++ continue ++ ;; ++ ++ -export-dynamic) ++ export_dynamic=yes ++ continue ++ ;; ++ ++ -export-symbols | -export-symbols-regex) ++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then ++ func_fatal_error "more than one -exported-symbols argument is not allowed" ++ fi ++ if test "X$arg" = "X-export-symbols"; then ++ prev=expsyms ++ else ++ prev=expsyms_regex ++ fi ++ continue ++ ;; ++ ++ -framework) ++ prev=framework ++ continue ++ ;; ++ ++ -inst-prefix-dir) ++ prev=inst_prefix ++ continue ++ ;; ++ ++ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* ++ # so, if we see these flags be careful not to treat them like -L ++ -L[A-Z][A-Z]*:*) ++ case $with_gcc/$host in ++ no/*-*-irix* | /*-*-irix*) ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ ;; ++ esac ++ continue ++ ;; ++ ++ -L*) ++ func_stripname '-L' '' "$arg" ++ dir=$func_stripname_result ++ if test -z "$dir"; then ++ if test "$#" -gt 0; then ++ func_fatal_error "require no space between \`-L' and \`$1'" ++ else ++ func_fatal_error "need path for \`-L' option" ++ fi ++ fi ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ absdir=`cd "$dir" && pwd` ++ test -z "$absdir" && \ ++ func_fatal_error "cannot determine absolute directory name of \`$dir'" ++ dir="$absdir" ++ ;; ++ esac ++ case "$deplibs " in ++ *" -L$dir "*) ;; ++ *) ++ deplibs="$deplibs -L$dir" ++ lib_search_path="$lib_search_path $dir" ++ ;; ++ esac ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) ++ testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` ++ case :$dllsearchpath: in ++ *":$dir:"*) ;; ++ ::) dllsearchpath=$dir;; ++ *) dllsearchpath="$dllsearchpath:$dir";; ++ esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ ::) dllsearchpath=$testbindir;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac ++ ;; ++ esac ++ continue ++ ;; ++ ++ -l*) ++ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) ++ # These systems don't actually have a C or math library (as such) ++ continue ++ ;; ++ *-*-os2*) ++ # These systems don't actually have a C library (as such) ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C and math libraries are in the System framework ++ deplibs="$deplibs System.ltframework" ++ continue ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ test "X$arg" = "X-lc" && continue ++ ;; ++ esac ++ elif test "X$arg" = "X-lc_r"; then ++ case $host in ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc_r directly, use -pthread flag. ++ continue ++ ;; ++ esac ++ fi ++ deplibs="$deplibs $arg" ++ continue ++ ;; ++ ++ -module) ++ module=yes ++ continue ++ ;; ++ ++ # Tru64 UNIX uses -model [arg] to determine the layout of C++ ++ # classes, name mangling, and exception handling. ++ # Darwin uses the -arch flag to determine output architecture. ++ -model|-arch|-isysroot) ++ compiler_flags="$compiler_flags $arg" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ prev=xcompiler ++ continue ++ ;; ++ ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) ++ compiler_flags="$compiler_flags $arg" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ case "$new_inherited_linker_flags " in ++ *" $arg "*) ;; ++ * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; ++ esac ++ continue ++ ;; ++ ++ -multi_module) ++ single_module="${wl}-multi_module" ++ continue ++ ;; ++ ++ -no-fast-install) ++ fast_install=no ++ continue ++ ;; ++ ++ -no-install) ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) ++ # The PATH hackery in wrapper scripts is required on Windows ++ # and Darwin in order for the loader to find any dlls it needs. ++ func_warning "\`-no-install' is ignored for $host" ++ func_warning "assuming \`-no-fast-install' instead" ++ fast_install=no ++ ;; ++ *) no_install=yes ;; ++ esac ++ continue ++ ;; ++ ++ -no-undefined) ++ allow_undefined=no ++ continue ++ ;; ++ ++ -objectlist) ++ prev=objectlist ++ continue ++ ;; ++ ++ -o) prev=output ;; ++ ++ -precious-files-regex) ++ prev=precious_regex ++ continue ++ ;; ++ ++ -release) ++ prev=release ++ continue ++ ;; ++ ++ -rpath) ++ prev=rpath ++ continue ++ ;; ++ ++ -R) ++ prev=xrpath ++ continue ++ ;; ++ ++ -R*) ++ func_stripname '-R' '' "$arg" ++ dir=$func_stripname_result ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ func_fatal_error "only absolute run-paths are allowed" ++ ;; ++ esac ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) xrpath="$xrpath $dir" ;; ++ esac ++ continue ++ ;; ++ ++ -shared) ++ # The effects of -shared are defined in a previous loop. ++ continue ++ ;; ++ ++ -shrext) ++ prev=shrext ++ continue ++ ;; ++ ++ -static | -static-libtool-libs) ++ # The effects of -static are defined in a previous loop. ++ # We used to do the same as -all-static on platforms that ++ # didn't have a PIC flag, but the assumption that the effects ++ # would be equivalent was wrong. It would break on at least ++ # Digital Unix and AIX. ++ continue ++ ;; ++ ++ -thread-safe) ++ thread_safe=yes ++ continue ++ ;; ++ ++ -version-info) ++ prev=vinfo ++ continue ++ ;; ++ ++ -version-number) ++ prev=vinfo ++ vinfo_number=yes ++ continue ++ ;; ++ ++ -weak) ++ prev=weak ++ continue ++ ;; ++ ++ -Wc,*) ++ func_stripname '-Wc,' '' "$arg" ++ args=$func_stripname_result ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ func_quote_for_eval "$flag" ++ arg="$arg $wl$func_quote_for_eval_result" ++ compiler_flags="$compiler_flags $func_quote_for_eval_result" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$arg" ++ arg=$func_stripname_result ++ ;; ++ ++ -Wl,*) ++ func_stripname '-Wl,' '' "$arg" ++ args=$func_stripname_result ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ func_quote_for_eval "$flag" ++ arg="$arg $wl$func_quote_for_eval_result" ++ compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" ++ linker_flags="$linker_flags $func_quote_for_eval_result" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$arg" ++ arg=$func_stripname_result ++ ;; ++ ++ -Xcompiler) ++ prev=xcompiler ++ continue ++ ;; ++ ++ -Xlinker) ++ prev=xlinker ++ continue ++ ;; ++ ++ -XCClinker) ++ prev=xcclinker ++ continue ++ ;; ++ ++ # -msg_* for osf cc ++ -msg_*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; ++ ++ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler ++ # -r[0-9][0-9]* specifies the processor on the SGI compiler ++ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler ++ # +DA*, +DD* enable 64-bit mode on the HP compiler ++ # -q* pass through compiler args for the IBM compiler ++ # -m*, -t[45]*, -txscale* pass through architecture-specific ++ # compiler args for GCC ++ # -F/path gives path to uninstalled frameworks, gcc on darwin ++ # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC ++ # @file GCC response files ++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ ++ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ compiler_flags="$compiler_flags $arg" ++ continue ++ ;; ++ ++ # Some other compiler flag. ++ -* | +*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; ++ ++ *.$objext) ++ # A standard object. ++ objs="$objs $arg" ++ ;; ++ ++ *.lo) ++ # A libtool-controlled object. ++ ++ # Check to see that this really is a libtool object. ++ if func_lalib_unsafe_p "$arg"; then ++ pic_object= ++ non_pic_object= ++ ++ # Read the .lo file ++ func_source "$arg" ++ ++ if test -z "$pic_object" || ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && ++ test "$non_pic_object" = none; then ++ func_fatal_error "cannot find name of object for \`$arg'" ++ fi ++ ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" ++ ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" ++ ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi ++ ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi ++ ++ # A PIC object. ++ func_append libobjs " $pic_object" ++ arg="$pic_object" ++ fi ++ ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ func_append non_pic_objects " $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if $opt_dry_run; then ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" ++ ++ func_lo2o "$arg" ++ pic_object=$xdir$objdir/$func_lo2o_result ++ non_pic_object=$xdir$func_lo2o_result ++ func_append libobjs " $pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ else ++ func_fatal_error "\`$arg' is not a valid libtool object" ++ fi ++ fi ++ ;; ++ ++ *.$libext) ++ # An archive. ++ deplibs="$deplibs $arg" ++ old_deplibs="$old_deplibs $arg" ++ continue ++ ;; ++ ++ *.la) ++ # A libtool-controlled library. ++ ++ if test "$prev" = dlfiles; then ++ # This library was specified with -dlopen. ++ dlfiles="$dlfiles $arg" ++ prev= ++ elif test "$prev" = dlprefiles; then ++ # The library was specified with -dlpreopen. ++ dlprefiles="$dlprefiles $arg" ++ prev= ++ else ++ deplibs="$deplibs $arg" ++ fi ++ continue ++ ;; ++ ++ # Some other compiler argument. ++ *) ++ # Unknown arguments in both finalize_command and compile_command need ++ # to be aesthetically quoted because they are evaled later. ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; ++ esac # arg ++ ++ # Now actually substitute the argument into the commands. ++ if test -n "$arg"; then ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ fi ++ done # argument parsing loop ++ ++ test -n "$prev" && \ ++ func_fatal_help "the \`$prevarg' option requires an argument" ++ ++ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then ++ eval arg=\"$export_dynamic_flag_spec\" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ fi ++ ++ oldlibs= ++ # calculate the name of the file, without its directory ++ func_basename "$output" ++ outputname="$func_basename_result" ++ libobjs_save="$libobjs" ++ ++ if test -n "$shlibpath_var"; then ++ # get the directories listed in $shlibpath_var ++ eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` ++ else ++ shlib_search_path= ++ fi ++ eval sys_lib_search_path=\"$sys_lib_search_path_spec\" ++ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" ++ ++ func_dirname "$output" "/" "" ++ output_objdir="$func_dirname_result$objdir" ++ # Create the object directory. ++ func_mkdir_p "$output_objdir" ++ ++ # Determine the type of output ++ case $output in ++ "") ++ func_fatal_help "you must specify an output file" ++ ;; ++ *.$libext) linkmode=oldlib ;; ++ *.lo | *.$objext) linkmode=obj ;; ++ *.la) linkmode=lib ;; ++ *) linkmode=prog ;; # Anything else should be a program. ++ esac ++ ++ specialdeplibs= ++ ++ libs= ++ # Find all interdependent deplibs by searching for libraries ++ # that are linked more than once (e.g. -la -lb -la) ++ for deplib in $deplibs; do ++ if $opt_duplicate_deps ; then ++ case "$libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ libs="$libs $deplib" ++ done ++ ++ if test "$linkmode" = lib; then ++ libs="$predeps $libs $compiler_lib_search_path $postdeps" ++ ++ # Compute libraries that are listed more than once in $predeps ++ # $postdeps and mark them as special (i.e., whose duplicates are ++ # not to be eliminated). ++ pre_post_deps= ++ if $opt_duplicate_compiler_generated_deps; then ++ for pre_post_dep in $predeps $postdeps; do ++ case "$pre_post_deps " in ++ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; ++ esac ++ pre_post_deps="$pre_post_deps $pre_post_dep" ++ done ++ fi ++ pre_post_deps= ++ fi ++ ++ deplibs= ++ newdependency_libs= ++ newlib_search_path= ++ need_relink=no # whether we're linking any uninstalled libtool libraries ++ notinst_deplibs= # not-installed libtool libraries ++ notinst_path= # paths that contain not-installed libtool libraries ++ ++ case $linkmode in ++ lib) ++ passes="conv dlpreopen link" ++ for file in $dlfiles $dlprefiles; do ++ case $file in ++ *.la) ;; ++ *) ++ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ++ ;; ++ esac ++ done ++ ;; ++ prog) ++ compile_deplibs= ++ finalize_deplibs= ++ alldeplibs=no ++ newdlfiles= ++ newdlprefiles= ++ passes="conv scan dlopen dlpreopen link" ++ ;; ++ *) passes="conv" ++ ;; ++ esac ++ ++ for pass in $passes; do ++ # The preopen pass in lib mode reverses $deplibs; put it back here ++ # so that -L comes before libs that need it for instance... ++ if test "$linkmode,$pass" = "lib,link"; then ++ ## FIXME: Find the place where the list is rebuilt in the wrong ++ ## order, and fix it there properly ++ tmp_deplibs= ++ for deplib in $deplibs; do ++ tmp_deplibs="$deplib $tmp_deplibs" ++ done ++ deplibs="$tmp_deplibs" ++ fi ++ ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan"; then ++ libs="$deplibs" ++ deplibs= ++ fi ++ if test "$linkmode" = prog; then ++ case $pass in ++ dlopen) libs="$dlfiles" ;; ++ dlpreopen) libs="$dlprefiles" ;; ++ link) ++ libs="$deplibs %DEPLIBS%" ++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ++ ;; ++ esac ++ fi ++ if test "$linkmode,$pass" = "lib,dlpreopen"; then ++ # Collect and forward deplibs of preopened libtool libs ++ for lib in $dlprefiles; do ++ # Ignore non-libtool-libs ++ dependency_libs= ++ case $lib in ++ *.la) func_source "$lib" ;; ++ esac ++ ++ # Collect preopened libtool deplibs, except any this library ++ # has declared as weak libs ++ for deplib in $dependency_libs; do ++ deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` ++ case " $weak_libs " in ++ *" $deplib_base "*) ;; ++ *) deplibs="$deplibs $deplib" ;; ++ esac ++ done ++ done ++ libs="$dlprefiles" ++ fi ++ if test "$pass" = dlopen; then ++ # Collect dlpreopened libraries ++ save_deplibs="$deplibs" ++ deplibs= ++ fi ++ ++ for deplib in $libs; do ++ lib= ++ found=no ++ case $deplib in ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ compiler_flags="$compiler_flags $deplib" ++ if test "$linkmode" = lib ; then ++ case "$new_inherited_linker_flags " in ++ *" $deplib "*) ;; ++ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; ++ esac ++ fi ++ fi ++ continue ++ ;; ++ -l*) ++ if test "$linkmode" != lib && test "$linkmode" != prog; then ++ func_warning "\`-l' is ignored for archives/objects" ++ continue ++ fi ++ func_stripname '-l' '' "$deplib" ++ name=$func_stripname_result ++ if test "$linkmode" = lib; then ++ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" ++ else ++ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" ++ fi ++ for searchdir in $searchdirs; do ++ for search_ext in .la $std_shrext .so .a; do ++ # Search the libtool library ++ lib="$searchdir/lib${name}${search_ext}" ++ if test -f "$lib"; then ++ if test "$search_ext" = ".la"; then ++ found=yes ++ else ++ found=no ++ fi ++ break 2 ++ fi ++ done ++ done ++ if test "$found" != yes; then ++ # deplib doesn't seem to be a libtool library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ else # deplib is a libtool library ++ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, ++ # We need to do some special things here, and not later. ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $deplib "*) ++ if func_lalib_p "$lib"; then ++ library_names= ++ old_library= ++ func_source "$lib" ++ for l in $old_library $library_names; do ++ ll="$l" ++ done ++ if test "X$ll" = "X$old_library" ; then # only static version available ++ found=no ++ func_dirname "$lib" "" "." ++ ladir="$func_dirname_result" ++ lib=$ladir/$old_library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ fi ++ fi ++ ;; ++ *) ;; ++ esac ++ fi ++ fi ++ ;; # -l ++ *.ltframework) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ if test "$linkmode" = lib ; then ++ case "$new_inherited_linker_flags " in ++ *" $deplib "*) ;; ++ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; ++ esac ++ fi ++ fi ++ continue ++ ;; ++ -L*) ++ case $linkmode in ++ lib) ++ deplibs="$deplib $deplibs" ++ test "$pass" = conv && continue ++ newdependency_libs="$deplib $newdependency_libs" ++ func_stripname '-L' '' "$deplib" ++ newlib_search_path="$newlib_search_path $func_stripname_result" ++ ;; ++ prog) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ if test "$pass" = scan; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ func_stripname '-L' '' "$deplib" ++ newlib_search_path="$newlib_search_path $func_stripname_result" ++ ;; ++ *) ++ func_warning "\`-L' is ignored for archives/objects" ++ ;; ++ esac # linkmode ++ continue ++ ;; # -L ++ -R*) ++ if test "$pass" = link; then ++ func_stripname '-R' '' "$deplib" ++ dir=$func_stripname_result ++ # Make sure the xrpath contains only unique directories. ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) xrpath="$xrpath $dir" ;; ++ esac ++ fi ++ deplibs="$deplib $deplibs" ++ continue ++ ;; ++ *.la) lib="$deplib" ;; ++ *.$libext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ case $linkmode in ++ lib) ++ # Linking convenience modules into shared libraries is allowed, ++ # but linking other static libraries is non-portable. ++ case " $dlpreconveniencelibs " in ++ *" $deplib "*) ;; ++ *) ++ valid_a_lib=no ++ case $deplibs_check_method in ++ match_pattern*) ++ set dummy $deplibs_check_method; shift ++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 $.*$"` ++ if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ valid_a_lib=yes ++ fi ++ ;; ++ pass_all) ++ valid_a_lib=yes ++ ;; ++ esac ++ if test "$valid_a_lib" != yes; then ++ $ECHO ++ $ECHO "*** Warning: Trying to link with static lib archive $deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because the file extensions .$libext of this argument makes me believe" ++ $ECHO "*** that it is just a static archive that I should not use here." ++ else ++ $ECHO ++ $ECHO "*** Warning: Linking the shared library $output against the" ++ $ECHO "*** static library $deplib is not portable!" ++ deplibs="$deplib $deplibs" ++ fi ++ ;; ++ esac ++ continue ++ ;; ++ prog) ++ if test "$pass" != link; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ continue ++ ;; ++ esac # linkmode ++ ;; # *.$libext ++ *.lo | *.$objext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ elif test "$linkmode" = prog; then ++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then ++ # If there is no dlopen support or we're linking statically, ++ # we need to preload. ++ newdlprefiles="$newdlprefiles $deplib" ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ newdlfiles="$newdlfiles $deplib" ++ fi ++ fi ++ continue ++ ;; ++ %DEPLIBS%) ++ alldeplibs=yes ++ continue ++ ;; ++ esac # case $deplib ++ ++ if test "$found" = yes || test -f "$lib"; then : ++ else ++ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" ++ fi ++ ++ # Check to see that this really is a libtool archive. ++ func_lalib_unsafe_p "$lib" \ ++ || func_fatal_error "\`$lib' is not a valid libtool archive" ++ ++ func_dirname "$lib" "" "." ++ ladir="$func_dirname_result" ++ ++ dlname= ++ dlopen= ++ dlpreopen= ++ libdir= ++ library_names= ++ old_library= ++ inherited_linker_flags= ++ # If the library was installed with an old release of libtool, ++ # it will not redefine variables installed, or shouldnotlink ++ installed=yes ++ shouldnotlink=no ++ avoidtemprpath= ++ ++ ++ # Read the .la file ++ func_source "$lib" ++ ++ # Convert "-framework foo" to "foo.ltframework" ++ if test -n "$inherited_linker_flags"; then ++ tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework $[^ $]*$/\1.ltframework/g'` ++ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do ++ case " $new_inherited_linker_flags " in ++ *" $tmp_inherited_linker_flag "*) ;; ++ *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; ++ esac ++ done ++ fi ++ dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan" || ++ { test "$linkmode" != prog && test "$linkmode" != lib; }; then ++ test -n "$dlopen" && dlfiles="$dlfiles $dlopen" ++ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" ++ fi ++ ++ if test "$pass" = conv; then ++ # Only check for convenience libraries ++ deplibs="$lib $deplibs" ++ if test -z "$libdir"; then ++ if test -z "$old_library"; then ++ func_fatal_error "cannot find name of link library for \`$lib'" ++ fi ++ # It is a libtool convenience library, so add in its objects. ++ convenience="$convenience $ladir/$objdir/$old_library" ++ old_convenience="$old_convenience $ladir/$objdir/$old_library" ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ deplibs="$deplib $deplibs" ++ if $opt_duplicate_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done ++ elif test "$linkmode" != prog && test "$linkmode" != lib; then ++ func_fatal_error "\`$lib' is not a convenience library" ++ fi ++ continue ++ fi # $pass = conv ++ ++ ++ # Get the name of the library we link against. ++ linklib= ++ for l in $old_library $library_names; do ++ linklib="$l" ++ done ++ if test -z "$linklib"; then ++ func_fatal_error "cannot find name of link library for \`$lib'" ++ fi ++ ++ # This library was specified with -dlopen. ++ if test "$pass" = dlopen; then ++ if test -z "$libdir"; then ++ func_fatal_error "cannot -dlopen a convenience library: \`$lib'" ++ fi ++ if test -z "$dlname" || ++ test "$dlopen_support" != yes || ++ test "$build_libtool_libs" = no; then ++ # If there is no dlname, no dlopen support or we're linking ++ # statically, we need to preload. We also need to preload any ++ # dependent libraries so libltdl's deplib preloader doesn't ++ # bomb out in the load deplibs phase. ++ dlprefiles="$dlprefiles $lib $dependency_libs" ++ else ++ newdlfiles="$newdlfiles $lib" ++ fi ++ continue ++ fi # $pass = dlopen ++ ++ # We need an absolute path. ++ case $ladir in ++ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; ++ *) ++ abs_ladir=`cd "$ladir" && pwd` ++ if test -z "$abs_ladir"; then ++ func_warning "cannot determine absolute directory name of \`$ladir'" ++ func_warning "passing it literally to the linker, although it might fail" ++ abs_ladir="$ladir" ++ fi ++ ;; ++ esac ++ func_basename "$lib" ++ laname="$func_basename_result" ++ ++ # Find the relevant object directory and library name. ++ if test "X$installed" = Xyes; then ++ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ func_warning "library \`$lib' was moved." ++ dir="$ladir" ++ absdir="$abs_ladir" ++ libdir="$abs_ladir" ++ else ++ dir="$libdir" ++ absdir="$libdir" ++ fi ++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes ++ else ++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ dir="$ladir" ++ absdir="$abs_ladir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ else ++ dir="$ladir/$objdir" ++ absdir="$abs_ladir/$objdir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ fi ++ fi # $installed = yes ++ func_stripname 'lib' '.la' "$laname" ++ name=$func_stripname_result ++ ++ # This library was specified with -dlpreopen. ++ if test "$pass" = dlpreopen; then ++ if test -z "$libdir" && test "$linkmode" = prog; then ++ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" ++ fi ++ # Prefer using a static library (so that no silly _DYNAMIC symbols ++ # are required to link). ++ if test -n "$old_library"; then ++ newdlprefiles="$newdlprefiles $dir/$old_library" ++ # Keep a list of preopened convenience libraries to check ++ # that they are being used correctly in the link pass. ++ test -z "$libdir" && \ ++ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" ++ # Otherwise, use the dlname, so that lt_dlopen finds it. ++ elif test -n "$dlname"; then ++ newdlprefiles="$newdlprefiles $dir/$dlname" ++ else ++ newdlprefiles="$newdlprefiles $dir/$linklib" ++ fi ++ fi # $pass = dlpreopen ++ ++ if test -z "$libdir"; then ++ # Link the convenience library ++ if test "$linkmode" = lib; then ++ deplibs="$dir/$old_library $deplibs" ++ elif test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$dir/$old_library $compile_deplibs" ++ finalize_deplibs="$dir/$old_library $finalize_deplibs" ++ else ++ deplibs="$lib $deplibs" # used for prog,scan pass ++ fi ++ continue ++ fi ++ ++ ++ if test "$linkmode" = prog && test "$pass" != link; then ++ newlib_search_path="$newlib_search_path $ladir" ++ deplibs="$lib $deplibs" ++ ++ linkalldeplibs=no ++ if test "$link_all_deplibs" != no || test -z "$library_names" || ++ test "$build_libtool_libs" = no; then ++ linkalldeplibs=yes ++ fi ++ ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ case $deplib in ++ -L*) func_stripname '-L' '' "$deplib" ++ newlib_search_path="$newlib_search_path $func_stripname_result" ++ ;; ++ esac ++ # Need to link against all dependency_libs? ++ if test "$linkalldeplibs" = yes; then ++ deplibs="$deplib $deplibs" ++ else ++ # Need to hardcode shared library paths ++ # or/and link against static libraries ++ newdependency_libs="$deplib $newdependency_libs" ++ fi ++ if $opt_duplicate_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done # for deplib ++ continue ++ fi # $linkmode = prog... ++ ++ if test "$linkmode,$pass" = "prog,link"; then ++ if test -n "$library_names" && ++ { { test "$prefer_static_libs" = no || ++ test "$prefer_static_libs,$installed" = "built,yes"; } || ++ test -z "$old_library"; }; then ++ # We need to hardcode the library path ++ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then ++ # Make sure the rpath contains only unique directories. ++ case "$temp_rpath:" in ++ *"$absdir:"*) ;; ++ *) temp_rpath="$temp_rpath$absdir:" ;; ++ esac ++ fi ++ ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) compile_rpath="$compile_rpath $absdir" ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ++ esac ++ ;; ++ esac ++ fi # $linkmode,$pass = prog,link... ++ ++ if test "$alldeplibs" = yes && ++ { test "$deplibs_check_method" = pass_all || ++ { test "$build_libtool_libs" = yes && ++ test -n "$library_names"; }; }; then ++ # We only need to search for static libraries ++ continue ++ fi ++ fi ++ ++ link_static=no # Whether the deplib will be linked statically ++ use_static_libs=$prefer_static_libs ++ if test "$use_static_libs" = built && test "$installed" = yes; then ++ use_static_libs=no ++ fi ++ if test -n "$library_names" && ++ { test "$use_static_libs" = no || test -z "$old_library"; }; then ++ case $host in ++ *cygwin* | *mingw* | *cegcc*) ++ # No point in relinking DLLs because paths are not encoded ++ notinst_deplibs="$notinst_deplibs $lib" ++ need_relink=no ++ ;; ++ *) ++ if test "$installed" = no; then ++ notinst_deplibs="$notinst_deplibs $lib" ++ need_relink=yes ++ fi ++ ;; ++ esac ++ # This is a shared library ++ ++ # Warn about portability, can't link against -module's on some ++ # systems (darwin). Don't bleat about dlopened modules though! ++ dlopenmodule="" ++ for dlpremoduletest in $dlprefiles; do ++ if test "X$dlpremoduletest" = "X$lib"; then ++ dlopenmodule="$dlpremoduletest" ++ break ++ fi ++ done ++ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then ++ $ECHO ++ if test "$linkmode" = prog; then ++ $ECHO "*** Warning: Linking the executable $output against the loadable module" ++ else ++ $ECHO "*** Warning: Linking the shared library $output against the loadable module" ++ fi ++ $ECHO "*** $linklib is not portable!" ++ fi ++ if test "$linkmode" = lib && ++ test "$hardcode_into_libs" = yes; then ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) compile_rpath="$compile_rpath $absdir" ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ++ esac ++ ;; ++ esac ++ fi ++ ++ if test -n "$old_archive_from_expsyms_cmds"; then ++ # figure out the soname ++ set dummy $library_names ++ shift ++ realname="$1" ++ shift ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ # use dlname if we got it. it's perfectly good, no? ++ if test -n "$dlname"; then ++ soname="$dlname" ++ elif test -n "$soname_spec"; then ++ # bleh windows ++ case $host in ++ *cygwin* | mingw* | *cegcc*) ++ func_arith $current - $age ++ major=$func_arith_result ++ versuffix="-$major" ++ ;; ++ esac ++ eval soname=\"$soname_spec\" ++ else ++ soname="$realname" ++ fi ++ ++ # Make a new name for the extract_expsyms_cmds to use ++ soroot="$soname" ++ func_basename "$soroot" ++ soname="$func_basename_result" ++ func_stripname 'lib' '.dll' "$soname" ++ newlib=libimp-$func_stripname_result.a ++ ++ # If the library has no export list, then create one now ++ if test -f "$output_objdir/$soname-def"; then : ++ else ++ func_verbose "extracting exported symbol list from \`$soname'" ++ func_execute_cmds "$extract_expsyms_cmds" 'exit $?' ++ fi ++ ++ # Create $newlib ++ if test -f "$output_objdir/$newlib"; then :; else ++ func_verbose "generating import library for \`$soname'" ++ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' ++ fi ++ # make sure the library variables are pointing to the new library ++ dir=$output_objdir ++ linklib=$newlib ++ fi # test -n "$old_archive_from_expsyms_cmds" ++ ++ if test "$linkmode" = prog || test "$mode" != relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ lib_linked=yes ++ case $hardcode_action in ++ immediate | unsupported) ++ if test "$hardcode_direct" = no; then ++ add="$dir/$linklib" ++ case $host in ++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; ++ *-*-sysv4*uw2*) add_dir="-L$dir" ;; ++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ ++ *-*-unixware7*) add_dir="-L$dir" ;; ++ *-*-darwin* ) ++ # if the lib is a (non-dlopened) module then we can not ++ # link against it, someone is ignoring the earlier warnings ++ if /usr/bin/file -L $add 2> /dev/null | ++ $GREP ": [^:]* bundle" >/dev/null ; then ++ if test "X$dlopenmodule" != "X$lib"; then ++ $ECHO "*** Warning: lib $linklib is a module, not a shared library" ++ if test -z "$old_library" ; then ++ $ECHO ++ $ECHO "*** And there doesn't seem to be a static archive available" ++ $ECHO "*** The link will probably fail, sorry" ++ else ++ add="$dir/$old_library" ++ fi ++ elif test -n "$old_library"; then ++ add="$dir/$old_library" ++ fi ++ fi ++ esac ++ elif test "$hardcode_minus_L" = no; then ++ case $host in ++ *-*-sunos*) add_shlibpath="$dir" ;; ++ esac ++ add_dir="-L$dir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = no; then ++ add_shlibpath="$dir" ++ add="-l$name" ++ else ++ lib_linked=no ++ fi ++ ;; ++ relink) ++ if test "$hardcode_direct" = yes && ++ test "$hardcode_direct_absolute" = no; then ++ add="$dir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$dir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ add_shlibpath="$dir" ++ add="-l$name" ++ else ++ lib_linked=no ++ fi ++ ;; ++ *) lib_linked=no ;; ++ esac ++ ++ if test "$lib_linked" != yes; then ++ func_fatal_configuration "unsupported hardcode properties" ++ fi ++ ++ if test -n "$add_shlibpath"; then ++ case :$compile_shlibpath: in ++ *":$add_shlibpath:"*) ;; ++ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; ++ esac ++ fi ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" ++ test -n "$add" && compile_deplibs="$add $compile_deplibs" ++ else ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" ++ if test "$hardcode_direct" != yes && ++ test "$hardcode_minus_L" != yes && ++ test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ esac ++ fi ++ fi ++ fi ++ ++ if test "$linkmode" = prog || test "$mode" = relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ # Finalize command for both is simple: just hardcode it. ++ if test "$hardcode_direct" = yes && ++ test "$hardcode_direct_absolute" = no; then ++ add="$libdir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$libdir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ esac ++ add="-l$name" ++ elif test "$hardcode_automatic" = yes; then ++ if test -n "$inst_prefix_dir" && ++ test -f "$inst_prefix_dir$libdir/$linklib" ; then ++ add="$inst_prefix_dir$libdir/$linklib" ++ else ++ add="$libdir/$linklib" ++ fi ++ else ++ # We cannot seem to hardcode it, guess we'll fake it. ++ add_dir="-L$libdir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi ++ add="-l$name" ++ fi ++ ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" ++ test -n "$add" && finalize_deplibs="$add $finalize_deplibs" ++ else ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" ++ fi ++ fi ++ elif test "$linkmode" = prog; then ++ # Here we assume that one of hardcode_direct or hardcode_minus_L ++ # is not unsupported. This is valid on all known static and ++ # shared platforms. ++ if test "$hardcode_direct" != unsupported; then ++ test -n "$old_library" && linklib="$old_library" ++ compile_deplibs="$dir/$linklib $compile_deplibs" ++ finalize_deplibs="$dir/$linklib $finalize_deplibs" ++ else ++ compile_deplibs="-l$name -L$dir $compile_deplibs" ++ finalize_deplibs="-l$name -L$dir $finalize_deplibs" ++ fi ++ elif test "$build_libtool_libs" = yes; then ++ # Not a shared library ++ if test "$deplibs_check_method" != pass_all; then ++ # We're trying link a shared library against a static one ++ # but the system doesn't support it. ++ ++ # Just print a warning and add the library to dependency_libs so ++ # that the program can be linked against the static library. ++ $ECHO ++ $ECHO "*** Warning: This system can not link to static lib archive $lib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have." ++ if test "$module" = yes; then ++ $ECHO "*** But as you try to build a module library, libtool will still create " ++ $ECHO "*** a static module, that should work as long as the dlopening application" ++ $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." ++ if test -z "$global_symbol_pipe"; then ++ $ECHO ++ $ECHO "*** However, this would only work if libtool was able to extract symbol" ++ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $ECHO "*** not find such a program. So, this module is probably useless." ++ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi ++ if test "$build_old_libs" = no; then ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ fi ++ else ++ deplibs="$dir/$old_library $deplibs" ++ link_static=yes ++ fi ++ fi # link shared/static library? ++ ++ if test "$linkmode" = lib; then ++ if test -n "$dependency_libs" && ++ { test "$hardcode_into_libs" != yes || ++ test "$build_old_libs" = yes || ++ test "$link_static" = yes; }; then ++ # Extract -R from dependency_libs ++ temp_deplibs= ++ for libdir in $dependency_libs; do ++ case $libdir in ++ -R*) func_stripname '-R' '' "$libdir" ++ temp_xrpath=$func_stripname_result ++ case " $xrpath " in ++ *" $temp_xrpath "*) ;; ++ *) xrpath="$xrpath $temp_xrpath";; ++ esac;; ++ *) temp_deplibs="$temp_deplibs $libdir";; ++ esac ++ done ++ dependency_libs="$temp_deplibs" ++ fi ++ ++ newlib_search_path="$newlib_search_path $absdir" ++ # Link against this library ++ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" ++ # ... and its dependency_libs ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ newdependency_libs="$deplib $newdependency_libs" ++ if $opt_duplicate_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done ++ ++ if test "$link_all_deplibs" != no; then ++ # Add the search paths of all dependency libraries ++ for deplib in $dependency_libs; do ++ path= ++ case $deplib in ++ -L*) path="$deplib" ;; ++ *.la) ++ func_dirname "$deplib" "" "." ++ dir="$func_dirname_result" ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; ++ *) ++ absdir=`cd "$dir" && pwd` ++ if test -z "$absdir"; then ++ func_warning "cannot determine absolute directory name of \`$dir'" ++ absdir="$dir" ++ fi ++ ;; ++ esac ++ if $GREP "^installed=no" $deplib > /dev/null; then ++ case $host in ++ *-*-darwin*) ++ depdepl= ++ eval deplibrary_names=`${SED} -n -e 's/^library_names=$.*$$/\1/p' $deplib` ++ if test -n "$deplibrary_names" ; then ++ for tmp in $deplibrary_names ; do ++ depdepl=$tmp ++ done ++ if test -f "$absdir/$objdir/$depdepl" ; then ++ depdepl="$absdir/$objdir/$depdepl" ++ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` ++ if test -z "$darwin_install_name"; then ++ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` ++ fi ++ compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" ++ linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" ++ path= ++ fi ++ fi ++ ;; ++ *) ++ path="-L$absdir/$objdir" ++ ;; ++ esac ++ else ++ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$deplib' is not a valid libtool archive" ++ test "$absdir" != "$libdir" && \ ++ func_warning "\`$deplib' seems to be moved" ++ ++ path="-L$absdir" ++ fi ++ ;; ++ esac ++ case " $deplibs " in ++ *" $path "*) ;; ++ *) deplibs="$path $deplibs" ;; ++ esac ++ done ++ fi # link_all_deplibs != no ++ fi # linkmode = lib ++ done # for deplib in $libs ++ if test "$pass" = link; then ++ if test "$linkmode" = "prog"; then ++ compile_deplibs="$new_inherited_linker_flags $compile_deplibs" ++ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" ++ else ++ compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` ++ fi ++ fi ++ dependency_libs="$newdependency_libs" ++ if test "$pass" = dlpreopen; then ++ # Link the dlpreopened libraries before other libraries ++ for deplib in $save_deplibs; do ++ deplibs="$deplib $deplibs" ++ done ++ fi ++ if test "$pass" != dlopen; then ++ if test "$pass" != conv; then ++ # Make sure lib_search_path contains only unique directories. ++ lib_search_path= ++ for dir in $newlib_search_path; do ++ case "$lib_search_path " in ++ *" $dir "*) ;; ++ *) lib_search_path="$lib_search_path $dir" ;; ++ esac ++ done ++ newlib_search_path= ++ fi ++ ++ if test "$linkmode,$pass" != "prog,link"; then ++ vars="deplibs" ++ else ++ vars="compile_deplibs finalize_deplibs" ++ fi ++ for var in $vars dependency_libs; do ++ # Add libraries to $var in reverse order ++ eval tmp_libs=\"\$$var\" ++ new_libs= ++ for deplib in $tmp_libs; do ++ # FIXME: Pedantically, this is the right thing to do, so ++ # that some nasty dependency loop isn't accidentally ++ # broken: ++ #new_libs="$deplib $new_libs" ++ # Pragmatically, this seems to cause very few problems in ++ # practice: ++ case $deplib in ++ -L*) new_libs="$deplib $new_libs" ;; ++ -R*) ;; ++ *) ++ # And here is the reason: when a library appears more ++ # than once as an explicit dependence of a library, or ++ # is implicitly linked in more than once by the ++ # compiler, it is considered special, and multiple ++ # occurrences thereof are not removed. Compare this ++ # with having the same library being listed as a ++ # dependency of multiple other libraries: in this case, ++ # we know (pedantically, we assume) the library does not ++ # need to be listed more than once, so we keep only the ++ # last copy. This is not always right, but it is rare ++ # enough that we require users that really mean to play ++ # such unportable linking tricks to link the library ++ # using -Wl,-lname, so that libtool does not consider it ++ # for duplicate removal. ++ case " $specialdeplibs " in ++ *" $deplib "*) new_libs="$deplib $new_libs" ;; ++ *) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$deplib $new_libs" ;; ++ esac ++ ;; ++ esac ++ ;; ++ esac ++ done ++ tmp_libs= ++ for deplib in $new_libs; do ++ case $deplib in ++ -L*) ++ case " $tmp_libs " in ++ *" $deplib "*) ;; ++ *) tmp_libs="$tmp_libs $deplib" ;; ++ esac ++ ;; ++ *) tmp_libs="$tmp_libs $deplib" ;; ++ esac ++ done ++ eval $var=\"$tmp_libs\" ++ done # for var ++ fi ++ # Last step: remove runtime libs from dependency_libs ++ # (they stay in deplibs) ++ tmp_libs= ++ for i in $dependency_libs ; do ++ case " $predeps $postdeps $compiler_lib_search_path " in ++ *" $i "*) ++ i="" ++ ;; ++ esac ++ if test -n "$i" ; then ++ tmp_libs="$tmp_libs $i" ++ fi ++ done ++ dependency_libs=$tmp_libs ++ done # for pass ++ if test "$linkmode" = prog; then ++ dlfiles="$newdlfiles" ++ fi ++ if test "$linkmode" = prog || test "$linkmode" = lib; then ++ dlprefiles="$newdlprefiles" ++ fi ++ ++ case $linkmode in ++ oldlib) ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ func_warning "\`-dlopen' is ignored for archives" ++ fi ++ ++ case " $deplibs" in ++ *\ -l* | *\ -L*) ++ func_warning "\`-l' and \`-L' are ignored for archives" ;; ++ esac + ++ test -n "$rpath" && \ ++ func_warning "\`-rpath' is ignored for archives" + ++ test -n "$xrpath" && \ ++ func_warning "\`-R' is ignored for archives" + -+# -+# Check to make sure the static flag actually works. -+# -+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -+if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_prog_compiler_static_works_CXX=no -+ save_LDFLAGS="$LDFLAGS" -+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" -+ echo "$lt_simple_link_test_code" > conftest.$ac_ext -+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then -+ # The linker can only warn and ignore the option if not recognized -+ # So say no if there are warnings -+ if test -s conftest.err; then -+ # Append any errors to the config.log. -+ cat conftest.err 1>&5 -+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp -+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 -+ if diff conftest.exp conftest.er2 >/dev/null; then -+ lt_cv_prog_compiler_static_works_CXX=yes -+ fi -+ else -+ lt_cv_prog_compiler_static_works_CXX=yes -+ fi -+ fi -+ $RM -r conftest* -+ LDFLAGS="$save_LDFLAGS" ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info/-version-number' is ignored for archives" + - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 --echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 --if test $ac_cv_lib_dld_dld_link = yes; then -- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 -+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for archives" + -+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then -+ : -+else -+ lt_prog_compiler_static_CXX= - fi - - --fi - - --fi -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_prog_compiler_c_o_CXX=no -+ $RM -r conftest 2>/dev/null -+ mkdir conftest -+ cd conftest -+ mkdir out -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext - -+ lt_compiler_flag="-o out/conftest2.$ac_objext" -+ # Insert the option either (1) after the last *FLAGS variable, or -+ # (2) before a word containing "conftest.", or (3) at the end. -+ # Note that $ac_compile itself does not contain backslashes and begins -+ # with a dollar sign (not a hyphen), so the echo should work correctly. -+ lt_compile=`echo "$ac_compile" | $SED \ -+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -+ -e 's:$: $lt_compiler_flag:'` -+ (eval echo "\"\$as_me:13427: $lt_compile\"" >&5) -+ (eval "$lt_compile" 2>out/conftest.err) -+ ac_status=$? -+ cat out/conftest.err >&5 -+ echo "$as_me:13431: \$? = $ac_status" >&5 -+ if (exit $ac_status) && test -s out/conftest2.$ac_objext -+ then -+ # The compiler can only warn and ignore the option if not recognized -+ # So say no if there are warnings -+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp -+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 -+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then -+ lt_cv_prog_compiler_c_o_CXX=yes -+ fi -+ fi -+ chmod u+w . 2>&5 -+ $RM conftest* -+ # SGI C++ compiler will create directory out/ii_files/ for -+ # template instantiation -+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files -+ $RM out/* && rmdir out -+ cd .. -+ $RM -r conftest -+ $RM conftest* - - fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 -+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } - - --fi - -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ lt_cv_prog_compiler_c_o_CXX=no -+ $RM -r conftest 2>/dev/null -+ mkdir conftest -+ cd conftest -+ mkdir out -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ test -n "$export_symbols$export_symbols_regex" && \ ++ func_warning "\`-export-symbols' is ignored for archives" + -+ lt_compiler_flag="-o out/conftest2.$ac_objext" -+ # Insert the option either (1) after the last *FLAGS variable, or -+ # (2) before a word containing "conftest.", or (3) at the end. -+ # Note that $ac_compile itself does not contain backslashes and begins -+ # with a dollar sign (not a hyphen), so the echo should work correctly. -+ lt_compile=`echo "$ac_compile" | $SED \ -+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -+ -e 's:$: $lt_compiler_flag:'` -+ (eval echo "\"\$as_me:13479: $lt_compile\"" >&5) -+ (eval "$lt_compile" 2>out/conftest.err) -+ ac_status=$? -+ cat out/conftest.err >&5 -+ echo "$as_me:13483: \$? = $ac_status" >&5 -+ if (exit $ac_status) && test -s out/conftest2.$ac_objext -+ then -+ # The compiler can only warn and ignore the option if not recognized -+ # So say no if there are warnings -+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp -+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 -+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then -+ lt_cv_prog_compiler_c_o_CXX=yes -+ fi -+ fi -+ chmod u+w . 2>&5 -+ $RM conftest* -+ # SGI C++ compiler will create directory out/ii_files/ for -+ # template instantiation -+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files -+ $RM out/* && rmdir out -+ cd .. -+ $RM -r conftest -+ $RM conftest* - - fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 -+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } - -- ;; -- esac - -- if test "x$lt_cv_dlopen" != xno; then -- enable_dlopen=yes -- else -- enable_dlopen=no ++ # Now set the variables for building old libraries. ++ build_libtool_libs=no ++ oldlibs="$output" ++ objs="$objs$old_deplibs" ++ ;; + ++ lib) ++ # Make sure we only generate libraries of the form `libNAME.la'. ++ case $outputname in ++ lib*) ++ func_stripname 'lib' '.la' "$outputname" ++ name=$func_stripname_result ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ ;; ++ *) ++ test "$module" = no && \ ++ func_fatal_help "libtool library \`$output' must begin with \`lib'" + -+hard_links="nottested" -+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then -+ # do not overwrite the value of need_locks provided by the user -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -+$as_echo_n "checking if we can lock with hard links... " >&6; } -+ hard_links=yes -+ $RM conftest* -+ ln conftest.a conftest.b 2>/dev/null && hard_links=no -+ touch conftest.a -+ ln conftest.a conftest.b 2>&5 || hard_links=no -+ ln conftest.a conftest.b 2>/dev/null && hard_links=no -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -+$as_echo "$hard_links" >&6; } -+ if test "$hard_links" = no; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} -+ need_locks=warn - fi -+else -+ need_locks=no -+fi - -- case $lt_cv_dlopen in -- dlopen) -- save_CPPFLAGS="$CPPFLAGS" -- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - -- save_LDFLAGS="$LDFLAGS" -- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - -- save_LIBS="$LIBS" -- LIBS="$lt_cv_dlopen_libs $LIBS" -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - -- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 --echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 --if test "${lt_cv_dlopen_self+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test "$cross_compiling" = yes; then : -- lt_cv_dlopen_self=cross --else -- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 -- lt_status=$lt_dlunknown -- cat > conftest.$ac_ext < $export_symbols' -+ case $host_os in -+ aix[4-9]*) -+ # If we're using GNU nm, then we don't want the "-C" option. -+ # -C means demangle to AIX nm, but means don't demangle with GNU nm -+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then -+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ else -+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ fi -+ ;; -+ pw32*) -+ export_symbols_cmds_CXX="$ltdll_cmds" -+ ;; -+ cygwin* | mingw* | cegcc*) -+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__$[^ ]*$[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' -+ ;; -+ linux* | k*bsd*-gnu) -+ link_all_deplibs_CXX=no -+ ;; -+ *) -+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -+ ;; -+ esac -+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - --#if HAVE_DLFCN_H --#include --#endif -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 -+$as_echo "$ld_shlibs_CXX" >&6; } -+test "$ld_shlibs_CXX" = no && can_build_shared=no - --#include -+with_gnu_ld_CXX=$with_gnu_ld - --#ifdef RTLD_GLOBAL --# define LT_DLGLOBAL RTLD_GLOBAL --#else --# ifdef DL_GLOBAL --# define LT_DLGLOBAL DL_GLOBAL --# else --# define LT_DLGLOBAL 0 --# endif --#endif - --/* We may have to define LT_DLLAZY_OR_NOW in the command line if we -- find out it does not work in some platform. */ --#ifndef LT_DLLAZY_OR_NOW --# ifdef RTLD_LAZY --# define LT_DLLAZY_OR_NOW RTLD_LAZY --# else --# ifdef DL_LAZY --# define LT_DLLAZY_OR_NOW DL_LAZY --# else --# ifdef RTLD_NOW --# define LT_DLLAZY_OR_NOW RTLD_NOW --# else --# ifdef DL_NOW --# define LT_DLLAZY_OR_NOW DL_NOW --# else --# define LT_DLLAZY_OR_NOW 0 --# endif --# endif --# endif --# endif --#endif - --#ifdef __cplusplus --extern "C" void exit (int); --#endif - --void fnord() { int i=42;} --int main () --{ -- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -- int status = $lt_dlunknown; - -- if (self) -- { -- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -- /* dlclose (self); */ -- } - -- exit (status); --} --EOF -- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -+# -+# Do we need to explicitly link libc? -+# -+case "x$archive_cmds_need_lc_CXX" in -+x|xyes) -+ # Assume -lc should be added -+ archive_cmds_need_lc_CXX=yes ++ if test "$need_lib_prefix" != no; then ++ # Add the "lib" prefix for modules if required ++ func_stripname '' '.la' "$outputname" ++ name=$func_stripname_result ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ else ++ func_stripname '' '.la' "$outputname" ++ libname=$func_stripname_result ++ fi ++ ;; ++ esac ++ ++ if test -n "$objs"; then ++ if test "$deplibs_check_method" != pass_all; then ++ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" ++ else ++ $ECHO ++ $ECHO "*** Warning: Linking the shared library $output against the non-libtool" ++ $ECHO "*** objects $objs is not portable!" ++ libobjs="$libobjs $objs" ++ fi ++ fi ++ ++ test "$dlself" != no && \ ++ func_warning "\`-dlopen self' is ignored for libtool libraries" ++ ++ set dummy $rpath ++ shift ++ test "$#" -gt 1 && \ ++ func_warning "ignoring multiple \`-rpath's for a libtool library" ++ ++ install_libdir="$1" ++ ++ oldlibs= ++ if test -z "$rpath"; then ++ if test "$build_libtool_libs" = yes; then ++ # Building a libtool convenience library. ++ # Some compilers have problems with a `.al' extension so ++ # convenience libraries should have the same extension an ++ # archive normally would. ++ oldlibs="$output_objdir/$libname.$libext $oldlibs" ++ build_libtool_libs=convenience ++ build_old_libs=yes ++ fi ++ ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" ++ ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for convenience libraries" ++ else ++ ++ # Parse the version information argument. ++ save_ifs="$IFS"; IFS=':' ++ set dummy $vinfo 0 0 0 ++ shift ++ IFS="$save_ifs" ++ ++ test -n "$7" && \ ++ func_fatal_help "too many parameters to \`-version-info'" ++ ++ # convert absolute version numbers to libtool ages ++ # this retains compatibility with .la files and attempts ++ # to make the code below a bit more comprehensible ++ ++ case $vinfo_number in ++ yes) ++ number_major="$1" ++ number_minor="$2" ++ number_revision="$3" ++ # ++ # There are really only two kinds -- those that ++ # use the current revision as the major version ++ # and those that subtract age and use age as ++ # a minor version. But, then there is irix ++ # which has an extra 1 added just for fun ++ # ++ case $version_type in ++ darwin|linux|osf|windows|none) ++ func_arith $number_major + $number_minor ++ current=$func_arith_result ++ age="$number_minor" ++ revision="$number_revision" ++ ;; ++ freebsd-aout|freebsd-elf|sunos) ++ current="$number_major" ++ revision="$number_minor" ++ age="0" ++ ;; ++ irix|nonstopux) ++ func_arith $number_major + $number_minor ++ current=$func_arith_result ++ age="$number_minor" ++ revision="$number_minor" ++ lt_irix_increment=no ++ ;; ++ *) ++ func_fatal_configuration "$modename: unknown library version type \`$version_type'" ++ ;; ++ esac ++ ;; ++ no) ++ current="$1" ++ revision="$2" ++ age="$3" ++ ;; ++ esac ++ ++ # Check that each of the things are valid numbers. ++ case $current in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "CURRENT \`$current' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac ++ ++ case $revision in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "REVISION \`$revision' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac ++ ++ case $age in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "AGE \`$age' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac ++ ++ if test "$age" -gt "$current"; then ++ func_error "AGE \`$age' is greater than the current interface number \`$current'" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ fi ++ ++ # Calculate the version variables. ++ major= ++ versuffix= ++ verstring= ++ case $version_type in ++ none) ;; ++ ++ darwin) ++ # Like Linux, but with the current version available in ++ # verstring for coding it into the library header ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix="$major.$age.$revision" ++ # Darwin ld doesn't like 0 for these options... ++ func_arith $current + 1 ++ minor_current=$func_arith_result ++ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" ++ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ++ ;; ++ ++ freebsd-aout) ++ major=".$current" ++ versuffix=".$current.$revision"; ++ ;; ++ ++ freebsd-elf) ++ major=".$current" ++ versuffix=".$current" ++ ;; ++ ++ irix | nonstopux) ++ if test "X$lt_irix_increment" = "Xno"; then ++ func_arith $current - $age ++ else ++ func_arith $current - $age + 1 ++ fi ++ major=$func_arith_result ++ ++ case $version_type in ++ nonstopux) verstring_prefix=nonstopux ;; ++ *) verstring_prefix=sgi ;; ++ esac ++ verstring="$verstring_prefix$major.$revision" + -+ if test "$enable_shared" = yes && test "$GCC" = yes; then -+ case $archive_cmds_CXX in -+ *'~'*) -+ # FIXME: we may have to deal with multi-command sequences. -+ ;; -+ '$CC '*) -+ # Test whether the compiler implicitly links with -lc since on some -+ # systems, -lgcc has to come before -lc. If gcc already passes -lc -+ # to ld, don't add -lc before -lgcc. -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -+ $RM conftest* -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ # Add in all the interfaces that we are compatible with. ++ loop=$revision ++ while test "$loop" -ne 0; do ++ func_arith $revision - $loop ++ iface=$func_arith_result ++ func_arith $loop - 1 ++ loop=$func_arith_result ++ verstring="$verstring_prefix$major.$iface:$verstring" ++ done + -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 -+ (eval $ac_compile) 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then -- (./conftest; exit; ) 2>/dev/null -- lt_status=$? -- case x$lt_status in -- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; -- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; -- x$lt_unknown|x*) lt_cv_dlopen_self=no ;; -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } 2>conftest.err; then -+ soname=conftest -+ lib=conftest -+ libobjs=conftest.$ac_objext -+ deplibs= -+ wl=$lt_prog_compiler_wl_CXX -+ pic_flag=$lt_prog_compiler_pic_CXX -+ compiler_flags=-v -+ linker_flags=-v -+ verstring= -+ output_objdir=. -+ libname=conftest -+ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX -+ allow_undefined_flag_CXX= -+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 -+ (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } -+ then -+ archive_cmds_need_lc_CXX=no -+ else -+ archive_cmds_need_lc_CXX=yes -+ fi -+ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag -+ else -+ cat conftest.err 1>&5 -+ fi -+ $RM conftest* -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_CXX" >&5 -+$as_echo "$archive_cmds_need_lc_CXX" >&6; } -+ ;; - esac -- else : -- # compilation failed -- lt_cv_dlopen_self=no - fi --fi --rm -fr conftest* -+ ;; -+esac ++ # Before this point, $major must not contain `.'. ++ major=.$major ++ versuffix="$major.$revision" ++ ;; + ++ linux) ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix="$major.$age.$revision" ++ ;; + ++ osf) ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix=".$current.$age.$revision" ++ verstring="$current.$age.$revision" + ++ # Add in all the interfaces that we are compatible with. ++ loop=$age ++ while test "$loop" -ne 0; do ++ func_arith $current - $loop ++ iface=$func_arith_result ++ func_arith $loop - 1 ++ loop=$func_arith_result ++ verstring="$verstring:${iface}.0" ++ done ++ ++ # Make executables depend on our current version. ++ verstring="$verstring:${current}.0" ++ ;; ++ ++ qnx) ++ major=".$current" ++ versuffix=".$current" ++ ;; ++ ++ sunos) ++ major=".$current" ++ versuffix=".$current.$revision" ++ ;; ++ ++ windows) ++ # Use '-' rather than '.', since we only want one ++ # extension on DOS 8.3 filesystems. ++ func_arith $current - $age ++ major=$func_arith_result ++ versuffix="-$major" ++ ;; ++ ++ *) ++ func_fatal_configuration "unknown library version type \`$version_type'" ++ ;; ++ esac ++ ++ # Clear the version info if we defaulted, and they specified a release. ++ if test -z "$vinfo" && test -n "$release"; then ++ major= ++ case $version_type in ++ darwin) ++ # we can't check for "0.0" in archive_cmds due to quoting ++ # problems, so we reset it completely ++ verstring= ++ ;; ++ *) ++ verstring="0.0" ++ ;; ++ esac ++ if test "$need_version" = no; then ++ versuffix= ++ else ++ versuffix=".0.0" ++ fi ++ fi ++ ++ # Remove version info from name if versioning should be avoided ++ if test "$avoid_version" = yes && test "$need_version" = no; then ++ major= ++ versuffix= ++ verstring="" ++ fi ++ ++ # Check to see if the archive will have undefined symbols. ++ if test "$allow_undefined" = yes; then ++ if test "$allow_undefined_flag" = unsupported; then ++ func_warning "undefined symbols not allowed in $host shared libraries" ++ build_libtool_libs=no ++ build_old_libs=yes ++ fi ++ else ++ # Don't allow undefined symbols. ++ allow_undefined_flag="$no_undefined_flag" ++ fi + - - --fi --echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 --echo "${ECHO_T}$lt_cv_dlopen_self" >&6 - -- if test "x$lt_cv_dlopen_self" = xyes; then -- LDFLAGS="$LDFLAGS $link_static_flag" -- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 --echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 --if test "${lt_cv_dlopen_self_static+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test "$cross_compiling" = yes; then : -- lt_cv_dlopen_self_static=cross --else -- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 -- lt_status=$lt_dlunknown -- cat > conftest.$ac_ext < --#endif - --#include - --#ifdef RTLD_GLOBAL --# define LT_DLGLOBAL RTLD_GLOBAL --#else --# ifdef DL_GLOBAL --# define LT_DLGLOBAL DL_GLOBAL --# else --# define LT_DLGLOBAL 0 --# endif --#endif - --/* We may have to define LT_DLLAZY_OR_NOW in the command line if we -- find out it does not work in some platform. */ --#ifndef LT_DLLAZY_OR_NOW --# ifdef RTLD_LAZY --# define LT_DLLAZY_OR_NOW RTLD_LAZY --# else --# ifdef DL_LAZY --# define LT_DLLAZY_OR_NOW DL_LAZY --# else --# ifdef RTLD_NOW --# define LT_DLLAZY_OR_NOW RTLD_NOW --# else --# ifdef DL_NOW --# define LT_DLLAZY_OR_NOW DL_NOW --# else --# define LT_DLLAZY_OR_NOW 0 --# endif --# endif --# endif --# endif --#endif - --#ifdef __cplusplus --extern "C" void exit (int); --#endif - --void fnord() { int i=42;} --int main () --{ -- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -- int status = $lt_dlunknown; - -- if (self) -- { -- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -- /* dlclose (self); */ -- } - -- exit (status); --} --EOF -- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then -- (./conftest; exit; ) 2>/dev/null -- lt_status=$? -- case x$lt_status in -- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; -- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; -- x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; -- esac -- else : -- # compilation failed -- lt_cv_dlopen_self_static=no -- fi --fi --rm -fr conftest* - - --fi --echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 --echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 -- fi - -- CPPFLAGS="$save_CPPFLAGS" -- LDFLAGS="$save_LDFLAGS" -- LIBS="$save_LIBS" -- ;; -- esac - -- case $lt_cv_dlopen_self in -- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; -- *) enable_dlopen_self=unknown ;; -- esac - -- case $lt_cv_dlopen_self_static in -- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; -- *) enable_dlopen_self_static=unknown ;; -- esac --fi - - --# The else clause should only fire when bootstrapping the --# libtool distribution, otherwise you forgot to ship ltmain.sh --# with your package, and you will get complaints that there are --# no rules to generate ltmain.sh. --if test -f "$ltmain"; then -- # See if we are running on zsh, and set the options which allow our commands through -- # without removal of \ escapes. -- if test -n "${ZSH_VERSION+set}" ; then -- setopt NO_GLOB_SUBST -- fi -- # Now quote all the things that may contain metacharacters while being -- # careful not to overquote the AC_SUBSTed values. We take copies of the -- # variables and quote the copies for generation of the libtool script. -- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ -- SED SHELL STRIP \ -- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ -- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ -- deplibs_check_method reload_flag reload_cmds need_locks \ -- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ -- lt_cv_sys_global_symbol_to_c_name_address \ -- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ -- old_postinstall_cmds old_postuninstall_cmds \ -- compiler_GCJ \ -- CC_GCJ \ -- LD_GCJ \ -- lt_prog_compiler_wl_GCJ \ -- lt_prog_compiler_pic_GCJ \ -- lt_prog_compiler_static_GCJ \ -- lt_prog_compiler_no_builtin_flag_GCJ \ -- export_dynamic_flag_spec_GCJ \ -- thread_safe_flag_spec_GCJ \ -- whole_archive_flag_spec_GCJ \ -- enable_shared_with_static_runtimes_GCJ \ -- old_archive_cmds_GCJ \ -- old_archive_from_new_cmds_GCJ \ -- predep_objects_GCJ \ -- postdep_objects_GCJ \ -- predeps_GCJ \ -- postdeps_GCJ \ -- compiler_lib_search_path_GCJ \ -- archive_cmds_GCJ \ -- archive_expsym_cmds_GCJ \ -- postinstall_cmds_GCJ \ -- postuninstall_cmds_GCJ \ -- old_archive_from_expsyms_cmds_GCJ \ -- allow_undefined_flag_GCJ \ -- no_undefined_flag_GCJ \ -- export_symbols_cmds_GCJ \ -- hardcode_libdir_flag_spec_GCJ \ -- hardcode_libdir_flag_spec_ld_GCJ \ -- hardcode_libdir_separator_GCJ \ -- hardcode_automatic_GCJ \ -- module_cmds_GCJ \ -- module_expsym_cmds_GCJ \ -- lt_cv_prog_compiler_c_o_GCJ \ -- exclude_expsyms_GCJ \ -- include_expsyms_GCJ; do -- -- case $var in -- old_archive_cmds_GCJ | \ -- old_archive_from_new_cmds_GCJ | \ -- archive_cmds_GCJ | \ -- archive_expsym_cmds_GCJ | \ -- module_cmds_GCJ | \ -- module_expsym_cmds_GCJ | \ -- old_archive_from_expsyms_cmds_GCJ | \ -- export_symbols_cmds_GCJ | \ -- extract_expsyms_cmds | reload_cmds | finish_cmds | \ -- postinstall_cmds | postuninstall_cmds | \ -- old_postinstall_cmds | old_postuninstall_cmds | \ -- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) -- # Double-quote double-evaled strings. -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" -- ;; -- *) -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" -- ;; -- esac -- done - -- case $lt_echo in -- *'\$0 --fallback-echo"') -- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` -- ;; -- esac - --cfgfile="$ofile" - -- cat <<__EOF__ >> "$cfgfile" --# ### BEGIN LIBTOOL TAG CONFIG: $tagname - --# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - --# Shell to use when invoking shell scripts. --SHELL=$lt_SHELL - --# Whether or not to build shared libraries. --build_libtool_libs=$enable_shared - --# Whether or not to build static libraries. --build_old_libs=$enable_static - --# Whether or not to add -lc for building shared libraries. --build_libtool_need_lc=$archive_cmds_need_lc_GCJ - --# Whether or not to disallow shared libs when runtime libs are static --allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ - --# Whether or not to optimize for fast installation. --fast_install=$enable_fast_install - --# The host system. --host_alias=$host_alias --host=$host - --# An echo program that does not interpret backslashes. --echo=$lt_echo - --# The archiver. --AR=$lt_AR --AR_FLAGS=$lt_AR_FLAGS - --# A C compiler. --LTCC=$lt_LTCC - --# A language-specific compiler. --CC=$lt_compiler_GCJ - --# Is the compiler the GNU C compiler? --with_gcc=$GCC_GCJ - --# An ERE matcher. --EGREP=$lt_EGREP - --# The linker used to build libraries. --LD=$lt_LD_GCJ - --# Whether we need hard or soft links. --LN_S=$lt_LN_S - --# A BSD-compatible nm program. --NM=$lt_NM - --# A symbol stripping program --STRIP=$lt_STRIP - --# Used to examine libraries when file_magic_cmd begins "file" --MAGIC_CMD=$MAGIC_CMD - --# Used on cygwin: DLL creation program. --DLLTOOL="$DLLTOOL" - --# Used on cygwin: object dumper. --OBJDUMP="$OBJDUMP" - --# Used on cygwin: assembler. --AS="$AS" - --# The name of the directory that contains temporary libtool files. --objdir=$objdir - --# How to create reloadable object files. --reload_flag=$lt_reload_flag --reload_cmds=$lt_reload_cmds - --# How to pass a linker flag through the compiler. --wl=$lt_lt_prog_compiler_wl_GCJ - --# Object file suffix (normally "o"). --objext="$ac_objext" - --# Old archive suffix (normally "a"). --libext="$libext" - --# Shared library suffix (normally ".so"). --shrext_cmds='$shrext_cmds' - --# Executable file suffix (normally ""). --exeext="$exeext" - --# Additional compiler flags for building library objects. --pic_flag=$lt_lt_prog_compiler_pic_GCJ --pic_mode=$pic_mode - --# What is the maximum length of a command? --max_cmd_len=$lt_cv_sys_max_cmd_len - --# Does compiler simultaneously support -c and -o options? --compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ - --# Must we lock files when doing compilation ? --need_locks=$lt_need_locks - --# Do we need the lib prefix for modules? --need_lib_prefix=$need_lib_prefix - --# Do we need a version for libraries? --need_version=$need_version - --# Whether dlopen is supported. --dlopen_support=$enable_dlopen - --# Whether dlopen of programs is supported. --dlopen_self=$enable_dlopen_self - --# Whether dlopen of statically linked programs is supported. --dlopen_self_static=$enable_dlopen_self_static - --# Compiler flag to prevent dynamic linking. --link_static_flag=$lt_lt_prog_compiler_static_GCJ -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -+$as_echo_n "checking dynamic linker characteristics... " >&6; } - --# Compiler flag to turn off builtin functions. --no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ -+library_names_spec= -+libname_spec='lib$name' -+soname_spec= -+shrext_cmds=".so" -+postinstall_cmds= -+postuninstall_cmds= -+finish_cmds= -+finish_eval= -+shlibpath_var= -+shlibpath_overrides_runpath=unknown -+version_type=none -+dynamic_linker="$host_os ld.so" -+sys_lib_dlsearch_path_spec="/lib /usr/lib" -+need_lib_prefix=unknown -+hardcode_into_libs=no - --# Compiler flag to allow reflexive dlopens. --export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ -+# when you set need_version to no, make sure it does not cause -set_version -+# flags to be left without arguments -+need_version=unknown - --# Compiler flag to generate shared objects directly from archives. --whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ -+case $host_os in -+aix3*) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' -+ shlibpath_var=LIBPATH - --# Compiler flag to generate thread-safe objects. --thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ -+ # AIX 3 has no versioning support, so we append a major version to the name. -+ soname_spec='${libname}${release}${shared_ext}$major' -+ ;; - --# Library versioning type. --version_type=$version_type -+aix[4-9]*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ hardcode_into_libs=yes -+ if test "$host_cpu" = ia64; then -+ # AIX 5 supports IA64 -+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ else -+ # With GCC up to 2.95.x, collect2 would create an import file -+ # for dependence libraries. The import file would start with -+ # the line `#! .'. This would cause the generated library to -+ # depend on `.', always an invalid library. This was fixed in -+ # development snapshots of GCC prior to 3.0. -+ case $host_os in -+ aix4 | aix4.[01] | aix4.[01].*) -+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' -+ echo ' yes ' -+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then -+ : -+ else -+ can_build_shared=no + fi -+ ;; -+ esac -+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct -+ # soname into executable. Probably we can add versioning support to -+ # collect2, so additional links can be useful in future. -+ if test "$aix_use_runtimelinking" = yes; then -+ # If using run time linking (on AIX 4.2 or later) use lib.so -+ # instead of lib.a to let people know that these are not -+ # typical AIX shared libraries. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ else -+ # We preserve .a as extension for shared libraries through AIX4.2 -+ # and later when we are not doing run time linking. -+ library_names_spec='${libname}${release}.a $libname.a' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ fi -+ shlibpath_var=LIBPATH -+ fi -+ ;; - --# Format of library name prefix. --libname_spec=$lt_libname_spec -+amigaos*) -+ case $host_cpu in -+ powerpc) -+ # Since July 2007 AmigaOS4 officially supports .so libraries. -+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ ;; -+ m68k) -+ library_names_spec='$libname.ixlibrary $libname.a' -+ # Create ${libname}_ixlibrary.a entries in /sys/libs. -+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' -+ ;; -+ esac -+ ;; - --# List of archive names. First name is the real one, the rest are links. --# The last name is the one that the linker finds with -lNAME. --library_names_spec=$lt_library_names_spec -+beos*) -+ library_names_spec='${libname}${shared_ext}' -+ dynamic_linker="$host_os ld.so" -+ shlibpath_var=LIBRARY_PATH -+ ;; - --# The coded name of the library, if different from the real name. --soname_spec=$lt_soname_spec -+bsdi[45]*) -+ version_type=linux -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" -+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" -+ # the default ld.so.conf also contains /usr/contrib/lib and -+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow -+ # libtool to hard-code these into programs -+ ;; - --# Commands used to build and install an old-style archive. --RANLIB=$lt_RANLIB --old_archive_cmds=$lt_old_archive_cmds_GCJ --old_postinstall_cmds=$lt_old_postinstall_cmds --old_postuninstall_cmds=$lt_old_postuninstall_cmds -+cygwin* | mingw* | pw32* | cegcc*) -+ version_type=windows -+ shrext_cmds=".dll" -+ need_version=no -+ need_lib_prefix=no + -+ case $GCC,$host_os in -+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) -+ library_names_spec='$libname.dll.a' -+ # DLL is installed to $(libdir)/../bin by postinstall_cmds -+ postinstall_cmds='base_file=`basename \${file}`~ -+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ -+ dldir=$destdir/`dirname \$dlpath`~ -+ test -d \$dldir || mkdir -p \$dldir~ -+ $install_prog $dir/$dlname \$dldir/$dlname~ -+ chmod a+x \$dldir/$dlname~ -+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then -+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; -+ fi' -+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ -+ dlpath=$dir/\$dldll~ -+ $RM \$dlpath' -+ shlibpath_overrides_runpath=yes ++ func_generate_dlsyms "$libname" "$libname" "yes" ++ libobjs="$libobjs $symfileobj" ++ test "X$libobjs" = "X " && libobjs= ++ ++ if test "$mode" != relink; then ++ # Remove our outputs, but don't remove object files since they ++ # may have been created when compiling PIC objects. ++ removelist= ++ tempremovelist=`$ECHO "$output_objdir/*"` ++ for p in $tempremovelist; do ++ case $p in ++ *.$objext | *.gcno) ++ ;; ++ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) ++ if test "X$precious_files_regex" != "X"; then ++ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 ++ then ++ continue ++ fi ++ fi ++ removelist="$removelist $p" ++ ;; ++ *) ;; ++ esac ++ done ++ test -n "$removelist" && \ ++ func_show_eval "${RM}r \$removelist" ++ fi ++ ++ # Now set the variables for building old libraries. ++ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then ++ oldlibs="$oldlibs $output_objdir/$libname.$libext" ++ ++ # Transform .lo files to .o files. ++ oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` ++ fi ++ ++ # Eliminate all temporary directories. ++ #for path in $notinst_path; do ++ # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` ++ # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` ++ # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` ++ #done ++ ++ if test -n "$xrpath"; then ++ # If the user specified any rpath flags, then add them. ++ temp_xrpath= ++ for libdir in $xrpath; do ++ temp_xrpath="$temp_xrpath -R$libdir" ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ;; ++ esac ++ done ++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then ++ dependency_libs="$temp_xrpath $dependency_libs" ++ fi ++ fi ++ ++ # Make sure dlfiles contains only unique files that won't be dlpreopened ++ old_dlfiles="$dlfiles" ++ dlfiles= ++ for lib in $old_dlfiles; do ++ case " $dlprefiles $dlfiles " in ++ *" $lib "*) ;; ++ *) dlfiles="$dlfiles $lib" ;; ++ esac ++ done ++ ++ # Make sure dlprefiles contains only unique files ++ old_dlprefiles="$dlprefiles" ++ dlprefiles= ++ for lib in $old_dlprefiles; do ++ case "$dlprefiles " in ++ *" $lib "*) ;; ++ *) dlprefiles="$dlprefiles $lib" ;; ++ esac ++ done ++ ++ if test "$build_libtool_libs" = yes; then ++ if test -n "$rpath"; then ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) ++ # these systems don't actually have a c library (as such)! ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C library is in the System framework ++ deplibs="$deplibs System.ltframework" ++ ;; ++ *-*-netbsd*) ++ # Don't link with libc until the a.out ld.so is fixed. ++ ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ ;; ++ *) ++ # Add libc to deplibs on all other systems if necessary. ++ if test "$build_libtool_need_lc" = "yes"; then ++ deplibs="$deplibs -lc" ++ fi ++ ;; ++ esac ++ fi ++ ++ # Transform deplibs into only deplibs that can be linked in shared. ++ name_save=$name ++ libname_save=$libname ++ release_save=$release ++ versuffix_save=$versuffix ++ major_save=$major ++ # I'm not sure if I'm treating the release correctly. I think ++ # release should show up in the -l (ie -lgmp5) so we don't want to ++ # add it in twice. Is that correct? ++ release="" ++ versuffix="" ++ major="" ++ newdeplibs= ++ droppeddeps=no ++ case $deplibs_check_method in ++ pass_all) ++ # Don't check for shared/static. Everything works. ++ # This might be a little naive. We might want to check ++ # whether the library exists or not. But this is on ++ # osf3 & osf4 and I'm not really sure... Just ++ # implementing what was already the behavior. ++ newdeplibs=$deplibs ++ ;; ++ test_compile) ++ # This code stresses the "libraries are programs" paradigm to its ++ # limits. Maybe even breaks it. We compile a program, linking it ++ # against the deplibs as a proxy for the library. Then we can check ++ # whether they linked in statically or dynamically with ldd. ++ $opt_dry_run || $RM conftest.c ++ cat > conftest.c </dev/null` ++ for potent_lib in $potential_libs; do ++ # Follow soft links. ++ if ls -lLd "$potent_lib" 2>/dev/null | ++ $GREP " -> " >/dev/null; then ++ continue ++ fi ++ # The statement above tries to avoid entering an ++ # endless loop below, in case of cyclic links. ++ # We might still enter an endless loop, since a link ++ # loop can be closed while we follow links, ++ # but so what? ++ potlib="$potent_lib" ++ while test -h "$potlib" 2>/dev/null; do ++ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` ++ case $potliblink in ++ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; ++ *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; ++ esac ++ done ++ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | ++ $SED -e 10q | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done ++ fi ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ $ECHO ++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $ECHO "*** with $libname but no candidates were found. (...for file magic test)" ++ else ++ $ECHO "*** with $libname and none of the candidates passed a file format test" ++ $ECHO "*** using a file magic. Last file checked: $potlib" ++ fi ++ fi ++ ;; ++ *) ++ # Add a -L argument. ++ newdeplibs="$newdeplibs $a_deplib" ++ ;; ++ esac ++ done # Gone through all deplibs. ++ ;; ++ match_pattern*) ++ set dummy $deplibs_check_method; shift ++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 $.*$"` ++ for a_deplib in $deplibs; do ++ case $a_deplib in ++ -l*) ++ func_stripname -l '' "$a_deplib" ++ name=$func_stripname_result ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $a_deplib "*) ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ ;; ++ esac ++ fi ++ if test -n "$a_deplib" ; then ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` ++ for potent_lib in $potential_libs; do ++ potlib="$potent_lib" # see symlink-check above in file_magic test ++ if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ ++ $EGREP "$match_pattern_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done ++ fi ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ $ECHO ++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" ++ else ++ $ECHO "*** with $libname and none of the candidates passed a file format test" ++ $ECHO "*** using a regex pattern. Last file checked: $potlib" ++ fi ++ fi ++ ;; ++ *) ++ # Add a -L argument. ++ newdeplibs="$newdeplibs $a_deplib" ++ ;; ++ esac ++ done # Gone through all deplibs. ++ ;; ++ none | unknown | *) ++ newdeplibs="" ++ tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ ++ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ for i in $predeps $postdeps ; do ++ # can't use Xsed below, because $i might contain '/' ++ tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` ++ done ++ fi ++ if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | ++ $GREP . >/dev/null; then ++ $ECHO ++ if test "X$deplibs_check_method" = "Xnone"; then ++ $ECHO "*** Warning: inter-library dependencies are not supported in this platform." ++ else ++ $ECHO "*** Warning: inter-library dependencies are not known to be supported." ++ fi ++ $ECHO "*** All declared inter-library dependencies are being dropped." ++ droppeddeps=yes ++ fi ++ ;; ++ esac ++ versuffix=$versuffix_save ++ major=$major_save ++ release=$release_save ++ libname=$libname_save ++ name=$name_save + -+ case $host_os in -+ cygwin*) -+ # Cygwin DLLs use 'cyg' prefix rather than 'lib' -+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" -+ ;; -+ mingw* | cegcc*) -+ # MinGW DLLs use traditional 'lib' prefix -+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then -+ # It is most probably a Windows format PATH printed by -+ # mingw gcc, but we are running on Cygwin. Gcc prints its search -+ # path with ; separators, and with drive letters. We can handle the -+ # drive letters (cygwin fileutils understands them), so leave them, -+ # especially as we might pass files found there to a mingw objdump, -+ # which wouldn't understand a cygwinified path. Ahh. -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -+ else -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ fi -+ ;; -+ pw32*) -+ # pw32 DLLs use 'pw' prefix rather than 'lib' -+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -+ ;; -+ esac -+ ;; - --# Create an old-style archive from a shared archive. --old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ -+ *) -+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' -+ ;; -+ esac -+ dynamic_linker='Win32 ld.exe' -+ # FIXME: first we should search . and the directory the executable is in -+ shlibpath_var=PATH -+ ;; - --# Create a temporary old-style archive to link instead of a shared archive. --old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ -+darwin* | rhapsody*) -+ dynamic_linker="$host_os dyld" -+ version_type=darwin -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' -+ soname_spec='${libname}${release}${major}$shared_ext' -+ shlibpath_overrides_runpath=yes -+ shlibpath_var=DYLD_LIBRARY_PATH -+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - --# Commands used to build and install a shared archive. --archive_cmds=$lt_archive_cmds_GCJ --archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ --postinstall_cmds=$lt_postinstall_cmds --postuninstall_cmds=$lt_postuninstall_cmds -+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' -+ ;; - --# Commands used to build a loadable module (assumed same as above if empty) --module_cmds=$lt_module_cmds_GCJ --module_expsym_cmds=$lt_module_expsym_cmds_GCJ -+dgux*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ ;; - --# Commands to strip libraries. --old_striplib=$lt_old_striplib --striplib=$lt_striplib -+freebsd1*) -+ dynamic_linker=no -+ ;; ++ case $host in ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library with the System framework ++ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; + esac +- $rm $output +- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 --# Dependencies to place before the objects being linked to create a --# shared library. --predep_objects=$lt_predep_objects_GCJ +- $echo > $output "\ +-#! $SHELL - --# Dependencies to place after the objects being linked to create a --# shared library. --postdep_objects=$lt_postdep_objects_GCJ +-# $output - temporary wrapper script for $objdir/$outputname +-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +-# +-# The $output program cannot be directly executed until all the libtool +-# libraries that it depends on are installed. +-# +-# This wrapper script should never be moved out of the build directory. +-# If it is, it will not operate correctly. - --# Dependencies to place before the objects being linked to create a --# shared library. --predeps=$lt_predeps_GCJ +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='${SED} -e 1s/^X//' +-sed_quote_subst='$sed_quote_subst' - --# Dependencies to place after the objects being linked to create a --# shared library. --postdeps=$lt_postdeps_GCJ -+freebsd* | dragonfly*) -+ # DragonFly does not have aout. When/if they implement a new -+ # versioning mechanism, adjust this. -+ if test -x /usr/bin/objformat; then -+ objformat=`/usr/bin/objformat` -+ else -+ case $host_os in -+ freebsd[123]*) objformat=aout ;; -+ *) objformat=elf ;; -+ esac -+ fi -+ version_type=freebsd-$objformat -+ case $version_type in -+ freebsd-elf*) -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -+ need_version=no -+ need_lib_prefix=no -+ ;; -+ freebsd-*) -+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' -+ need_version=yes -+ ;; -+ esac -+ shlibpath_var=LD_LIBRARY_PATH -+ case $host_os in -+ freebsd2*) -+ shlibpath_overrides_runpath=yes -+ ;; -+ freebsd3.[01]* | freebsdelf3.[01]*) -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ ;; -+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ -+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; -+ *) # from 4.6 on, and DragonFly -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ ;; -+ esac -+ ;; - --# The library search path used internally by the compiler when linking --# a shared library. --compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ -+gnu*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ hardcode_into_libs=yes -+ ;; - --# Method to check whether dependent libraries are shared objects. --deplibs_check_method=$lt_deplibs_check_method -+hpux9* | hpux10* | hpux11*) -+ # Give a soname corresponding to the major version so that dld.sl refuses to -+ # link against other versions. -+ version_type=sunos -+ need_lib_prefix=no -+ need_version=no -+ case $host_cpu in -+ ia64*) -+ shrext_cmds='.so' -+ hardcode_into_libs=yes -+ dynamic_linker="$host_os dld.so" -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ if test "X$HPUX_IA64_MODE" = X32; then -+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" -+ else -+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" -+ fi -+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -+ ;; -+ hppa*64*) -+ shrext_cmds='.sl' -+ hardcode_into_libs=yes -+ dynamic_linker="$host_os dld.sl" -+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH -+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" -+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -+ ;; -+ *) -+ shrext_cmds='.sl' -+ dynamic_linker="$host_os dld.sl" -+ shlibpath_var=SHLIB_PATH -+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ ;; -+ esac -+ # HP-UX runs *really* slowly unless shared libraries are mode 555. -+ postinstall_cmds='chmod 555 $lib' -+ ;; - --# Command to use when deplibs_check_method == file_magic. --file_magic_cmd=$lt_file_magic_cmd -+interix[3-9]*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; - --# Flag that allows shared libraries with undefined symbols to be built. --allow_undefined_flag=$lt_allow_undefined_flag_GCJ -+irix5* | irix6* | nonstopux*) -+ case $host_os in -+ nonstopux*) version_type=nonstopux ;; -+ *) -+ if test "$lt_cv_prog_gnu_ld" = yes; then -+ version_type=linux -+ else -+ version_type=irix -+ fi ;; -+ esac -+ need_lib_prefix=no -+ need_version=no -+ soname_spec='${libname}${release}${shared_ext}$major' -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' -+ case $host_os in -+ irix5* | nonstopux*) -+ libsuff= shlibsuff= -+ ;; -+ *) -+ case $LD in # libtool.m4 will add one of these switches to LD -+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") -+ libsuff= shlibsuff= libmagic=32-bit;; -+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") -+ libsuff=32 shlibsuff=N32 libmagic=N32;; -+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") -+ libsuff=64 shlibsuff=64 libmagic=64-bit;; -+ *) libsuff= shlibsuff= libmagic=never-match;; -+ esac -+ ;; -+ esac -+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH -+ shlibpath_overrides_runpath=no -+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" -+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" -+ hardcode_into_libs=yes -+ ;; - --# Flag that forces no undefined symbols. --no_undefined_flag=$lt_no_undefined_flag_GCJ -+# No shared lib support for Linux oldld, aout, or coff. -+linux*oldld* | linux*aout* | linux*coff*) -+ dynamic_linker=no -+ ;; - --# Commands used to finish a libtool library installation in a directory. --finish_cmds=$lt_finish_cmds -+# This must be Linux ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ # Some binutils ld are patched to set DT_RUNPATH -+ save_LDFLAGS=$LDFLAGS -+ save_libdir=$libdir -+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ -+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ - --# Same as above, but a single script fragment to be evaled but not shown. --finish_eval=$lt_finish_eval -+int -+main () -+{ - --# Take the output of nm and produce a listing of raw symbols and C names. --global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_cxx_try_link "$LINENO"; then : -+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : -+ shlibpath_overrides_runpath=yes -+fi -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+ LDFLAGS=$save_LDFLAGS -+ libdir=$save_libdir - --# Transform the output of nm in a proper C declaration --global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -+ # This implies no fast_install, which is unacceptable. -+ # Some rework will be needed to allow for fast_install -+ # before this can be enabled. -+ hardcode_into_libs=yes - --# Transform the output of nm in a C name address pair --global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -+ # Append ld.so.conf contents to the search path -+ if test -f /etc/ld.so.conf; then -+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` -+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" -+ fi +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi +- +-relink_command=\"$relink_command\" +- +-# This environment variable determines our operation mode. +-if test \"\$libtool_install_magic\" = \"$magic\"; then +- # install mode needs the following variable: +- notinst_deplibs='$notinst_deplibs' +-else +- # When we are sourced in execute mode, \$file and \$echo are already set. +- if test \"\$libtool_execute_magic\" != \"$magic\"; then +- echo=\"$qecho\" +- file=\"\$0\" +- # Make sure echo works. +- if test \"X\$1\" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then +- # Yippee, \$echo works! +- : +- else +- # Restart under the correct shell, and then maybe \$echo will work. +- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} +- fi +- fi\ +-" +- $echo >> $output "\ +- +- # Find the directory that this script lives in. +- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` +- test \"x\$thisdir\" = \"x\$file\" && thisdir=. +- +- # Follow symbolic links until we get to the real thisdir. +- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` +- while test -n \"\$file\"; do +- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` ++ if test "$droppeddeps" = yes; then ++ if test "$module" = yes; then ++ $ECHO ++ $ECHO "*** Warning: libtool could not satisfy all declared inter-library" ++ $ECHO "*** dependencies of module $libname. Therefore, libtool will create" ++ $ECHO "*** a static module, that should work as long as the dlopening" ++ $ECHO "*** application is linked with the -dlopen flag." ++ if test -z "$global_symbol_pipe"; then ++ $ECHO ++ $ECHO "*** However, this would only work if libtool was able to extract symbol" ++ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $ECHO "*** not find such a program. So, this module is probably useless." ++ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ else ++ $ECHO "*** The inter-library dependencies that have been dropped here will be" ++ $ECHO "*** automatically added whenever a program is linked with this library" ++ $ECHO "*** or is declared to -dlopen it." --# This is the shared library runtime path variable. --runpath_var=$runpath_var -+ # We used to test for /lib/ld.so.1 and disable shared libraries on -+ # powerpc, because MkLinux only supported shared libraries with the -+ # GNU dynamic linker. Since this was broken with cross compilers, -+ # most powerpc-linux boxes support dynamic linking these days and -+ # people can always --disable-shared, the test was removed, and we -+ # assume the GNU/Linux dynamic linker is in use. -+ dynamic_linker='GNU/Linux ld.so' -+ ;; +- # If there was a directory component, then change thisdir. +- if test \"x\$destdir\" != \"x\$file\"; then +- case \"\$destdir\" in +- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; +- *) thisdir=\"\$thisdir/\$destdir\" ;; ++ if test "$allow_undefined" = no; then ++ $ECHO ++ $ECHO "*** Since this library must not contain undefined symbols," ++ $ECHO "*** because either the platform does not support them or" ++ $ECHO "*** it was explicitly requested with -no-undefined," ++ $ECHO "*** libtool will only create a static version of it." ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ fi ++ fi ++ fi ++ # Done checking deplibs! ++ deplibs=$newdeplibs ++ fi ++ # Time to change all our "foo.ltframework" stuff back to "-framework foo" ++ case $host in ++ *-*-darwin*) ++ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` ++ new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` ++ deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` ++ ;; + esac +- fi +- +- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` +- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` +- done --# This is the shared library path variable. --shlibpath_var=$shlibpath_var -+netbsdelf*-gnu) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ dynamic_linker='NetBSD ld.elf_so' -+ ;; +- # Try to get the absolute directory name. +- absdir=\`cd \"\$thisdir\" && pwd\` +- test -n \"\$absdir\" && thisdir=\"\$absdir\" +-" +- +- if test "$fast_install" = yes; then +- $echo >> $output "\ +- program=lt-'$outputname'$exeext +- progdir=\"\$thisdir/$objdir\" +- +- if test ! -f \"\$progdir/\$program\" || \\ +- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ +- test \"X\$file\" != \"X\$progdir/\$program\"; }; then ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ deplibs="$new_libs" --# Is shlibpath searched before the hard-coded library search path? --shlibpath_overrides_runpath=$shlibpath_overrides_runpath -+netbsd*) -+ version_type=sunos -+ need_lib_prefix=no -+ need_version=no -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -+ dynamic_linker='NetBSD (a.out) ld.so' -+ else -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ dynamic_linker='NetBSD ld.elf_so' -+ fi -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ ;; +- file=\"\$\$-\$program\" ++ # All the library-specific variables (install_libdir is set above). ++ library_names= ++ old_library= ++ dlname= --# How to hardcode a shared library path into an executable. --hardcode_action=$hardcode_action_GCJ -+newsos6) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ ;; +- if test ! -d \"\$progdir\"; then +- $mkdir \"\$progdir\" +- else +- $rm \"\$progdir/\$file\" +- fi" ++ # Test again, we may have decided not to build it any more ++ if test "$build_libtool_libs" = yes; then ++ if test "$hardcode_into_libs" = yes; then ++ # Hardcode the library paths ++ hardcode_libdirs= ++ dep_rpath= ++ rpath="$finalize_rpath" ++ test "$mode" != relink && rpath="$compile_rpath$rpath" ++ for libdir in $rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ dep_rpath="$dep_rpath $flag" ++ fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in ++ *" $libdir "*) ;; ++ *) perm_rpath="$perm_rpath $libdir" ;; ++ esac ++ fi ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ if test -n "$hardcode_libdir_flag_spec_ld"; then ++ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ++ else ++ eval dep_rpath=\"$hardcode_libdir_flag_spec\" ++ fi ++ fi ++ if test -n "$runpath_var" && test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" ++ fi ++ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" ++ fi --# Whether we should hardcode library paths into libraries. --hardcode_into_libs=$hardcode_into_libs -+*nto* | *qnx*) -+ version_type=qnx -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ dynamic_linker='ldqnx.so' -+ ;; +- $echo >> $output "\ ++ shlibpath="$finalize_shlibpath" ++ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" ++ if test -n "$shlibpath"; then ++ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" ++ fi --# Flag to hardcode \$libdir into a binary during linking. --# This must work even if \$libdir does not exist. --hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ -+openbsd*) -+ version_type=sunos -+ sys_lib_dlsearch_path_spec="/usr/lib" -+ need_lib_prefix=no -+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. -+ case $host_os in -+ openbsd3.3 | openbsd3.3.*) need_version=yes ;; -+ *) need_version=no ;; -+ esac -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ case $host_os in -+ openbsd2.[89] | openbsd2.[89].*) -+ shlibpath_overrides_runpath=no -+ ;; -+ *) -+ shlibpath_overrides_runpath=yes -+ ;; -+ esac -+ else -+ shlibpath_overrides_runpath=yes -+ fi -+ ;; +- # relink executable if necessary +- if test -n \"\$relink_command\"; then +- if relink_command_output=\`eval \$relink_command 2>&1\`; then : +- else +- $echo \"\$relink_command_output\" >&2 +- $rm \"\$progdir/\$file\" +- exit $EXIT_FAILURE +- fi +- fi ++ # Get the real and link names of the library. ++ eval shared_ext=\"$shrext_cmds\" ++ eval library_names=\"$library_names_spec\" ++ set dummy $library_names ++ shift ++ realname="$1" ++ shift --# If ld is used when linking, flag to hardcode \$libdir into --# a binary during linking. This must work even if \$libdir does --# not exist. --hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || +- { $rm \"\$progdir/\$program\"; +- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } +- $rm \"\$progdir/\$file\" +- fi" ++ if test -n "$soname_spec"; then ++ eval soname=\"$soname_spec\" + else +- $echo >> $output "\ +- program='$outputname' +- progdir=\"\$thisdir/$objdir\" +-" ++ soname="$realname" + fi - --# Whether we need a single -rpath flag with a separated argument. --hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ +- $echo >> $output "\ - --# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the --# resulting binary. --hardcode_direct=$hardcode_direct_GCJ +- if test -f \"\$progdir/\$program\"; then" - --# Set to yes if using the -LDIR flag during linking hardcodes DIR into the --# resulting binary. --hardcode_minus_L=$hardcode_minus_L_GCJ +- # Export our shlibpath_var if we have one. +- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then +- $echo >> $output "\ +- # Add our own library path to $shlibpath_var +- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - --# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into --# the resulting binary. --hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ +- # Some systems cannot cope with colon-terminated $shlibpath_var +- # The second colon is a workaround for a bug in BeOS R4 sed +- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - --# Set to yes if building a shared library automatically hardcodes DIR into the library --# and all subsequent libraries and executables linked against it. --hardcode_automatic=$hardcode_automatic_GCJ -+os2*) -+ libname_spec='$name' -+ shrext_cmds=".dll" -+ need_lib_prefix=no -+ library_names_spec='$libname${shared_ext} $libname.a' -+ dynamic_linker='OS/2 ld.exe' -+ shlibpath_var=LIBPATH -+ ;; - --# Variables whose values should be saved in libtool wrapper scripts and --# restored at relink time. --variables_saved_for_relink="$variables_saved_for_relink" -+osf3* | osf4* | osf5*) -+ version_type=osf -+ need_lib_prefix=no -+ need_version=no -+ soname_spec='${libname}${release}${shared_ext}$major' -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" -+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" -+ ;; - --# Whether libtool must link a program against all its dependency libraries. --link_all_deplibs=$link_all_deplibs_GCJ -+rdos*) -+ dynamic_linker=no -+ ;; - --# Compile-time system search path for libraries --sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -+solaris*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ # ldd complains unless libraries are executable -+ postinstall_cmds='chmod +x $lib' -+ ;; - --# Run-time system search path for libraries --sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -+sunos4*) -+ version_type=sunos -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ if test "$with_gnu_ld" = yes; then -+ need_lib_prefix=no -+ fi -+ need_version=yes -+ ;; - --# Fix the shell variable \$srcfile for the compiler. --fix_srcfile_path="$fix_srcfile_path_GCJ" -+sysv4 | sysv4.3*) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ case $host_vendor in -+ sni) -+ shlibpath_overrides_runpath=no -+ need_lib_prefix=no -+ runpath_var=LD_RUN_PATH -+ ;; -+ siemens) -+ need_lib_prefix=no -+ ;; -+ motorola) -+ need_lib_prefix=no -+ need_version=no -+ shlibpath_overrides_runpath=no -+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' -+ ;; -+ esac -+ ;; - --# Set to yes if exported symbols are required. --always_export_symbols=$always_export_symbols_GCJ -+sysv4*MP*) -+ if test -d /usr/nec ;then -+ version_type=linux -+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' -+ soname_spec='$libname${shared_ext}.$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ fi -+ ;; - --# The commands to list exported symbols. --export_symbols_cmds=$lt_export_symbols_cmds_GCJ -+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) -+ version_type=freebsd-elf -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ if test "$with_gnu_ld" = yes; then -+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' -+ else -+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' -+ case $host_os in -+ sco3.2v5*) -+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" -+ ;; -+ esac -+ fi -+ sys_lib_dlsearch_path_spec='/usr/lib' -+ ;; - --# The commands to extract the exported symbol list from a shared archive. --extract_expsyms_cmds=$lt_extract_expsyms_cmds -+tpf*) -+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; - --# Symbols that should not be listed in the preloaded symbols. --exclude_expsyms=$lt_exclude_expsyms_GCJ -+uts4*) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ ;; - --# Symbols that must always be exported. --include_expsyms=$lt_include_expsyms_GCJ -+*) -+ dynamic_linker=no -+ ;; -+esac -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -+$as_echo "$dynamic_linker" >&6; } -+test "$dynamic_linker" = no && can_build_shared=no - --# ### END LIBTOOL TAG CONFIG: $tagname -+variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -+if test "$GCC" = yes; then -+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -+fi +- export $shlibpath_var +-" ++ if test -z "$dlname"; then ++ dlname=$soname + fi --__EOF__ -+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then -+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -+fi -+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then -+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -+fi +- # fixup the dll searchpath if we need to. +- if test -n "$dllsearchpath"; then +- $echo >> $output "\ +- # Add the dll search path components to the executable PATH +- PATH=$dllsearchpath:\$PATH +-" +- fi ++ lib="$output_objdir/$realname" ++ linknames= ++ for link ++ do ++ linknames="$linknames $link" ++ done +- $echo >> $output "\ +- if test \"\$libtool_execute_magic\" != \"$magic\"; then +- # Run the actual program with our arguments. +-" +- case $host in +- # Backslashes separate directories on plain windows +- *-*-mingw | *-*-os2*) +- $echo >> $output "\ +- exec \$progdir\\\\\$program \${1+\"\$@\"} +-" +- ;; ++ # Use standard objects if they are pic ++ test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ test "X$libobjs" = "X " && libobjs= --else -- # If there is no Makefile yet, we rely on a make rule to execute -- # `config.status --recheck' to rerun these tests and create the -- # libtool script then. -- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` -- if test -f "$ltmain_in"; then -- test -f Makefile && make "$ltmain" +- *) +- $echo >> $output "\ +- exec \$progdir/\$program \${1+\"\$@\"} +-" ++ delfiles= ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" ++ export_symbols="$output_objdir/$libname.uexp" ++ delfiles="$delfiles $export_symbols" ++ fi ++ ++ orig_export_symbols= ++ case $host_os in ++ cygwin* | mingw* | cegcc*) ++ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then ++ # exporting using user supplied symfile ++ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then ++ # and it's NOT already a .def file. Must figure out ++ # which of the given symbols are data symbols and tag ++ # them as such. So, trigger use of export_symbols_cmds. ++ # export_symbols gets reassigned inside the "prepare ++ # the list of exported symbols" if statement, so the ++ # include_expsyms logic still works. ++ orig_export_symbols="$export_symbols" ++ export_symbols= ++ always_export_symbols=yes ++ fi ++ fi + ;; + esac +- $echo >> $output "\ +- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" +- exit $EXIT_FAILURE +- fi +- else +- # The program doesn't exist. +- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 +- \$echo \"This script is just a wrapper for \$program.\" 1>&2 +- $echo \"See the $PACKAGE documentation for more information.\" 1>&2 +- exit $EXIT_FAILURE - fi --fi - - --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu - --CC="$lt_save_CC" +-fi\ +-" +- chmod +x $output +- fi +- exit $EXIT_SUCCESS +- ;; +- esac +- +- # See if we need to build an old-fashioned archive. +- for oldlib in $oldlibs; do +- if test "$build_libtool_libs" = convenience; then +- oldobjs="$libobjs_save" +- addlibs="$convenience" +- build_libtool_libs=no +- else +- if test "$build_libtool_libs" = module; then +- oldobjs="$libobjs_save" +- build_libtool_libs=no - else -- tagname="" -- fi -- ;; - -- RC) - - - --# Source file extension for RC test sources. --ac_ext=rc +- oldobjs="$old_deplibs $non_pic_objects" ++ # Prepare the list of exported symbols ++ if test -z "$export_symbols"; then ++ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then ++ func_verbose "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $opt_dry_run || $RM $export_symbols ++ cmds=$export_symbols_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ func_len " $cmd" ++ len=$func_len_result ++ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ func_show_eval "$cmd" 'exit $?' ++ skipped_export=false ++ else ++ # The command line is too long to execute in one step. ++ func_verbose "using reloadable object file for export list..." ++ skipped_export=: ++ # Break out early, otherwise skipped_export may be ++ # set to false by a later but shorter cmd. ++ break ++ fi ++ done ++ IFS="$save_ifs" ++ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then ++ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' ++ fi ++ fi + fi +- addlibs="$old_convenience" +- fi --# Object file extension for compiled RC test sources. --objext=o --objext_RC=$objext +- if test -n "$addlibs"; then +- gentop="$output_objdir/${outputname}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "$mkdir $gentop" +- $run $mkdir "$gentop" +- status=$? +- if test "$status" -ne 0 && test ! -d "$gentop"; then +- exit $status ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ tmp_export_symbols="$export_symbols" ++ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" ++ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' ++ fi ++ ++ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then ++ # The given exports_symbols file has to be filtered, so filter it. ++ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" ++ # FIXME: $output_objdir/$libname.filter potentially contains lots of ++ # 's' commands which not all seds can handle. GNU sed should be fine ++ # though. Also, the filter scales superlinearly with the number of ++ # global variables. join(1) would be nice here, but unfortunately ++ # isn't a blessed tool. ++ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,$.*$$[ \,].*$,s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter ++ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" ++ export_symbols=$output_objdir/$libname.def ++ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi +- generated="$generated $gentop" --# Code to be used in simple compile tests --lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' +- # Add in members from convenience archives. +- for xlib in $addlibs; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; ++ tmp_deplibs= ++ for test_deplib in $deplibs; do ++ case " $convenience " in ++ *" $test_deplib "*) ;; ++ *) ++ tmp_deplibs="$tmp_deplibs $test_deplib" ++ ;; + esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" ++ done ++ deplibs="$tmp_deplibs" --# Code to be used in simple link tests --lt_simple_link_test_code="$lt_simple_compile_test_code" +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "$mkdir $xdir" +- $run $mkdir "$xdir" +- status=$? +- if test "$status" -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- # We will extract separately just the conflicting names and we will no +- # longer touch any unique names. It is faster to leave these extract +- # automatically by $AR in one run. +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? +- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then +- : ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec" && ++ test "$compiler_needs_object" = yes && ++ test -z "$libobjs"; then ++ # extract the archives, so we have objects to list. ++ # TODO: could optimize this to just extract one archive. ++ whole_archive_flag_spec= ++ fi ++ if test -n "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ test "X$libobjs" = "X " && libobjs= + else +- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 +- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 +- $AR t "$xabs" | sort | uniq -cd | while read -r count name +- do +- i=1 +- while test "$i" -le "$count" +- do +- # Put our $i before any first dot (extension) +- # Never overwrite any file +- name_to="$name" +- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" +- do +- name_to=`$echo "X$name_to" | $Xsed -e "s/$[^.]*$/\1-$i/"` +- done +- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" +- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? +- i=`expr $i + 1` +- done +- done ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ ++ func_extract_archives $gentop $convenience ++ libobjs="$libobjs $func_extract_archives_result" ++ test "X$libobjs" = "X " && libobjs= + fi ++ fi --# ltmain only uses $CC for tagged configurations so make sure $CC is set. +- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` +- done +- fi ++ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then ++ eval flag=\"$thread_safe_flag_spec\" ++ linker_flags="$linker_flags $flag" ++ fi --# If no C compiler was specified, use CC. --LTCC=${LTCC-"$CC"} +- # Do each command in the archive commands. +- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then +- cmds=$old_archive_from_new_cmds +- else +- eval cmds=\"$old_archive_cmds\" ++ # Make a backup of the uninstalled library when relinking ++ if test "$mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? ++ fi --# Allow CC to be a program name with arguments. --compiler=$CC +- if len=`expr "X$cmds" : ".*"` && +- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then +- cmds=$old_archive_cmds +- else +- # the command line is too long to link in one step, link in parts +- $echo "using piecewise archive linking..." +- save_RANLIB=$RANLIB +- RANLIB=: +- objlist= +- concat_cmds= +- save_oldobjs=$oldobjs +- # GNU ar 2.10+ was changed to match POSIX; thus no paths are +- # encoded into archives. This makes 'ar r' malfunction in +- # this piecewise linking case whenever conflicting object +- # names appear in distinct ar calls; check, warn and compensate. +- if (for obj in $save_oldobjs +- do +- $echo "X$obj" | $Xsed -e 's%^.*/%%' +- done | sort | sort -uc >/dev/null 2>&1); then +- : ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ eval test_cmds=\"$module_expsym_cmds\" ++ cmds=$module_expsym_cmds + else +- $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2 +- $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2 +- AR_FLAGS=cq ++ eval test_cmds=\"$module_cmds\" ++ cmds=$module_cmds + fi +- # Is there a better way of finding the last object in the list? +- for obj in $save_oldobjs +- do +- last_oldobj=$obj +- done +- for obj in $save_oldobjs +- do +- oldobjs="$objlist $obj" +- objlist="$objlist $obj" +- eval test_cmds=\"$old_archive_cmds\" +- if len=`expr "X$test_cmds" : ".*"` && +- test "$len" -le "$max_cmd_len"; then +- : +- else +- # the above command should be used before it gets too long +- oldobjs=$objlist +- if test "$obj" = "$last_oldobj" ; then +- RANLIB=$save_RANLIB +- fi +- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ +- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" +- objlist= +- fi +- done +- RANLIB=$save_RANLIB +- oldobjs=$objlist +- if test "X$oldobjs" = "X" ; then +- eval cmds=\"\$concat_cmds\" ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ eval test_cmds=\"$archive_expsym_cmds\" ++ cmds=$archive_expsym_cmds + else +- eval cmds=\"\$concat_cmds~\$old_archive_cmds\" ++ eval test_cmds=\"$archive_cmds\" ++ cmds=$archive_cmds + fi + fi +- fi +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- eval cmd=\"$cmd\" +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- done +- +- if test -n "$generated"; then +- $show "${rm}r$generated" +- $run ${rm}r$generated +- fi +- +- # Now create the libtool archive. +- case $output in +- *.la) +- old_library= +- test "$build_old_libs" = yes && old_library="$libname.$libext" +- $show "creating $output" +- # Preserve any variables that may affect compiler behavior +- for var in $variables_saved_for_relink; do +- if eval test -z \"\${$var+set}\"; then +- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" +- elif eval var_value=\$$var; test -z "$var_value"; then +- relink_command="$var=; export $var; $relink_command" ++ if test "X$skipped_export" != "X:" && ++ func_len " $test_cmds" && ++ len=$func_len_result && ++ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ : + else +- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` +- relink_command="$var=\"$var_value\"; export $var; $relink_command" +- fi +- done +- # Quote the link command for shipping. +- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" +- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` +- if test "$hardcode_automatic" = yes ; then +- relink_command= +- fi ++ # The command line is too long to link in one step, link piecewise ++ # or, if using GNU ld and skipped_export is not :, use a linker ++ # script. ++ ++ # Save the value of $output and $libobjs because we want to ++ # use them later. If we have whole_archive_flag_spec, we ++ # want to use save_libobjs as it was before ++ # whole_archive_flag_spec was expanded, because we can't ++ # assume the linker understands whole_archive_flag_spec. ++ # This may have to be revisited, in case too many ++ # convenience libraries get linked in and end up exceeding ++ # the spec. ++ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ fi ++ save_output=$output ++ output_la=`$ECHO "X$output" | $Xsed -e "$basename"` --# Allow CC to be a program name with arguments. --lt_save_CC="$CC" --CC=${RC-"windres"} --compiler=$CC --compiler_RC=$CC --lt_cv_prog_compiler_c_o_RC=yes ++ # Clear the reloadable object creation command queue and ++ # initialize k to one. ++ test_cmds= ++ concat_cmds= ++ objlist= ++ last_robj= ++ k=1 --# The else clause should only fire when bootstrapping the --# libtool distribution, otherwise you forgot to ship ltmain.sh --# with your package, and you will get complaints that there are --# no rules to generate ltmain.sh. --if test -f "$ltmain"; then -- # See if we are running on zsh, and set the options which allow our commands through -- # without removal of \ escapes. -- if test -n "${ZSH_VERSION+set}" ; then -- setopt NO_GLOB_SUBST -- fi -- # Now quote all the things that may contain metacharacters while being -- # careful not to overquote the AC_SUBSTed values. We take copies of the -- # variables and quote the copies for generation of the libtool script. -- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ -- SED SHELL STRIP \ -- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ -- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ -- deplibs_check_method reload_flag reload_cmds need_locks \ -- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ -- lt_cv_sys_global_symbol_to_c_name_address \ -- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ -- old_postinstall_cmds old_postuninstall_cmds \ -- compiler_RC \ -- CC_RC \ -- LD_RC \ -- lt_prog_compiler_wl_RC \ -- lt_prog_compiler_pic_RC \ -- lt_prog_compiler_static_RC \ -- lt_prog_compiler_no_builtin_flag_RC \ -- export_dynamic_flag_spec_RC \ -- thread_safe_flag_spec_RC \ -- whole_archive_flag_spec_RC \ -- enable_shared_with_static_runtimes_RC \ -- old_archive_cmds_RC \ -- old_archive_from_new_cmds_RC \ -- predep_objects_RC \ -- postdep_objects_RC \ -- predeps_RC \ -- postdeps_RC \ -- compiler_lib_search_path_RC \ -- archive_cmds_RC \ -- archive_expsym_cmds_RC \ -- postinstall_cmds_RC \ -- postuninstall_cmds_RC \ -- old_archive_from_expsyms_cmds_RC \ -- allow_undefined_flag_RC \ -- no_undefined_flag_RC \ -- export_symbols_cmds_RC \ -- hardcode_libdir_flag_spec_RC \ -- hardcode_libdir_flag_spec_ld_RC \ -- hardcode_libdir_separator_RC \ -- hardcode_automatic_RC \ -- module_cmds_RC \ -- module_expsym_cmds_RC \ -- lt_cv_prog_compiler_c_o_RC \ -- exclude_expsyms_RC \ -- include_expsyms_RC; do -- -- case $var in -- old_archive_cmds_RC | \ -- old_archive_from_new_cmds_RC | \ -- archive_cmds_RC | \ -- archive_expsym_cmds_RC | \ -- module_cmds_RC | \ -- module_expsym_cmds_RC | \ -- old_archive_from_expsyms_cmds_RC | \ -- export_symbols_cmds_RC | \ -- extract_expsyms_cmds | reload_cmds | finish_cmds | \ -- postinstall_cmds | postuninstall_cmds | \ -- old_postinstall_cmds | old_postuninstall_cmds | \ -- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) -- # Double-quote double-evaled strings. -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" -- ;; -- *) -- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" -- ;; -- esac -- done +- # Only create the output if not a dry run. +- if test -z "$run"; then +- for installed in no yes; do +- if test "$installed" = yes; then +- if test -z "$install_libdir"; then +- break ++ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then ++ output=${output_objdir}/${output_la}.lnkscript ++ func_verbose "creating GNU ld script: $output" ++ $ECHO 'INPUT (' > $output ++ for obj in $save_libobjs ++ do ++ $ECHO "$obj" >> $output ++ done ++ $ECHO ')' >> $output ++ delfiles="$delfiles $output" ++ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then ++ output=${output_objdir}/${output_la}.lnk ++ func_verbose "creating linker input file list: $output" ++ : > $output ++ set x $save_libobjs ++ shift ++ firstobj= ++ if test "$compiler_needs_object" = yes; then ++ firstobj="$1 " ++ shift + fi +- output="$output_objdir/$outputname"i +- # Replace all uninstalled libtool libraries with the installed ones +- newdependency_libs= +- for deplib in $dependency_libs; do +- case $deplib in +- *.la) +- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` +- if test -z "$libdir"; then +- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE +- fi +- newdependency_libs="$newdependency_libs $libdir/$name" +- ;; +- *) newdependency_libs="$newdependency_libs $deplib" ;; +- esac ++ for obj ++ do ++ $ECHO "$obj" >> $output + done +- dependency_libs="$newdependency_libs" +- newdlfiles= +- for lib in $dlfiles; do +- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` +- if test -z "$libdir"; then +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE ++ delfiles="$delfiles $output" ++ output=$firstobj\"$file_list_spec$output\" ++ else ++ if test -n "$save_libobjs"; then ++ func_verbose "creating reloadable object files..." ++ output=$output_objdir/$output_la-${k}.$objext ++ eval test_cmds=\"$reload_cmds\" ++ func_len " $test_cmds" ++ len0=$func_len_result ++ len=$len0 ++ ++ # Loop over the list of objects to be linked. ++ for obj in $save_libobjs ++ do ++ func_len " $obj" ++ func_arith $len + $func_len_result ++ len=$func_arith_result ++ if test "X$objlist" = X || ++ test "$len" -lt "$max_cmd_len"; then ++ func_append objlist " $obj" ++ else ++ # The command $test_cmds is almost too long, add a ++ # command to the queue. ++ if test "$k" -eq 1 ; then ++ # The first file doesn't have a previous command to add. ++ eval concat_cmds=\"$reload_cmds $objlist $last_robj\" ++ else ++ # All subsequent reloadable object files will link in ++ # the last one created. ++ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" ++ fi ++ last_robj=$output_objdir/$output_la-${k}.$objext ++ func_arith $k + 1 ++ k=$func_arith_result ++ output=$output_objdir/$output_la-${k}.$objext ++ objlist=$obj ++ func_len " $last_robj" ++ func_arith $len0 + $func_len_result ++ len=$func_arith_result ++ fi ++ done ++ # Handle the remaining objects by creating one last ++ # reloadable object file. All subsequent reloadable object ++ # files will link in the last one created. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" ++ if test -n "$last_robj"; then ++ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi +- newdlfiles="$newdlfiles $libdir/$name" +- done +- dlfiles="$newdlfiles" +- newdlprefiles= +- for lib in $dlprefiles; do +- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` +- if test -z "$libdir"; then +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE ++ delfiles="$delfiles $output" ++ ++ else ++ output= ++ fi ++ ++ if ${skipped_export-false}; then ++ func_verbose "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $opt_dry_run || $RM $export_symbols ++ libobjs=$output ++ # Append the command to create the export file. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" ++ if test -n "$last_robj"; then ++ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi +- newdlprefiles="$newdlprefiles $libdir/$name" ++ fi ++ ++ test -n "$save_libobjs" && ++ func_verbose "creating a temporary reloadable object file: $output" ++ ++ # Loop through the commands generated above and execute them. ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $concat_cmds; do ++ IFS="$save_ifs" ++ $opt_silent || { ++ func_quote_for_expand "$cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ $opt_dry_run || eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ ( cd "$output_objdir" && \ ++ $RM "${realname}T" && \ ++ $MV "${realname}U" "$realname" ) ++ fi ++ ++ exit $lt_exit ++ } + done +- dlprefiles="$newdlprefiles" ++ IFS="$save_ifs" ++ ++ if test -n "$export_symbols_regex" && ${skipped_export-false}; then ++ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' ++ fi ++ fi ++ ++ if ${skipped_export-false}; then ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ tmp_export_symbols="$export_symbols" ++ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" ++ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' ++ fi ++ ++ if test -n "$orig_export_symbols"; then ++ # The given exports_symbols file has to be filtered, so filter it. ++ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" ++ # FIXME: $output_objdir/$libname.filter potentially contains lots of ++ # 's' commands which not all seds can handle. GNU sed should be fine ++ # though. Also, the filter scales superlinearly with the number of ++ # global variables. join(1) would be nice here, but unfortunately ++ # isn't a blessed tool. ++ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,$.*$$[ \,].*$,s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter ++ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" ++ export_symbols=$output_objdir/$libname.def ++ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols ++ fi ++ fi ++ ++ libobjs=$output ++ # Restore the value of output. ++ output=$save_output ++ ++ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ test "X$libobjs" = "X " && libobjs= ++ fi ++ # Expand the library linking commands again to reset the ++ # value of $libobjs for piecewise linking. ++ ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ cmds=$module_expsym_cmds ++ else ++ cmds=$module_cmds ++ fi + else +- newdlfiles= +- for lib in $dlfiles; do +- case $lib in +- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; +- *) abs=`pwd`"/$lib" ;; +- esac +- newdlfiles="$newdlfiles $abs" +- done +- dlfiles="$newdlfiles" +- newdlprefiles= +- for lib in $dlprefiles; do +- case $lib in +- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; +- *) abs=`pwd`"/$lib" ;; +- esac +- newdlprefiles="$newdlprefiles $abs" +- done +- dlprefiles="$newdlprefiles" ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ cmds=$archive_expsym_cmds ++ else ++ cmds=$archive_cmds ++ fi + fi +- $rm $output +- # place dlname in correct position for cygwin +- tdlname=$dlname +- case $host,$output,$installed,$module,$dlname in +- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; +- esac +- $echo > $output "\ +-# $outputname - a libtool library file +-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +-# +-# Please DO NOT delete this file! +-# It is necessary for linking the library. ++ fi -- case $lt_echo in -- *'\$0 --fallback-echo"') -- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` -- ;; -- esac +-# The name that we can dlopen(3). +-dlname='$tdlname' ++ if test -n "$delfiles"; then ++ # Append the command to remove temporary files to $cmds. ++ eval cmds=\"\$cmds~\$RM $delfiles\" ++ fi --cfgfile="$ofile" +-# Names of this library. +-library_names='$library_names' ++ # Add any objects from preloaded convenience libraries ++ if test -n "$dlprefiles"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" -- cat <<__EOF__ >> "$cfgfile" --# ### BEGIN LIBTOOL TAG CONFIG: $tagname +-# The name of the static archive. +-old_library='$old_library' ++ func_extract_archives $gentop $dlprefiles ++ libobjs="$libobjs $func_extract_archives_result" ++ test "X$libobjs" = "X " && libobjs= ++ fi --# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +-# Libraries that this one depends upon. +-dependency_libs='$dependency_libs' ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $opt_silent || { ++ func_quote_for_expand "$cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ $opt_dry_run || eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ ( cd "$output_objdir" && \ ++ $RM "${realname}T" && \ ++ $MV "${realname}U" "$realname" ) ++ fi --# Shell to use when invoking shell scripts. --SHELL=$lt_SHELL +-# Version information for $libname. +-current=$current +-age=$age +-revision=$revision ++ exit $lt_exit ++ } ++ done ++ IFS="$save_ifs" --# Whether or not to build shared libraries. --build_libtool_libs=$enable_shared +-# Is this an already installed library? +-installed=$installed ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? --# Whether or not to build static libraries. --build_old_libs=$enable_static +-# Should we warn about portability when linking against -modules? +-shouldnotlink=$module ++ if test -n "$convenience"; then ++ if test -z "$whole_archive_flag_spec"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ fi --# Whether or not to add -lc for building shared libraries. --build_libtool_need_lc=$archive_cmds_need_lc_RC +-# Files to dlopen/dlpreopen +-dlopen='$dlfiles' +-dlpreopen='$dlprefiles' ++ exit $EXIT_SUCCESS ++ fi --# Whether or not to disallow shared libs when runtime libs are static --allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC +-# Directory that this library needs to be installed in: +-libdir='$install_libdir'" +- if test "$installed" = no && test "$need_relink" = yes; then +- $echo >> $output "\ +-relink_command=\"$relink_command\"" ++ # Create links to the real library. ++ for linkname in $linknames; do ++ if test "$realname" != "$linkname"; then ++ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done +- fi --# Whether or not to optimize for fast installation. --fast_install=$enable_fast_install +- # Do a symbolic link so that the libtool archive can be found in +- # LD_LIBRARY_PATH before the program is installed. +- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" +- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ++ # If -module or -export-dynamic was specified, set the dlname. ++ if test "$module" = yes || test "$export_dynamic" = yes; then ++ # On all known operating systems, these are identical. ++ dlname="$soname" ++ fi ++ fi + ;; +- esac +- exit $EXIT_SUCCESS +- ;; --# The host system. --host_alias=$host_alias --host=$host +- # libtool install mode +- install) +- modename="$modename: install" ++ obj) ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ func_warning "\`-dlopen' is ignored for objects" ++ fi --# An echo program that does not interpret backslashes. --echo=$lt_echo +- # There may be an optional sh(1) argument at the beginning of +- # install_prog (especially on Windows NT). +- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || +- # Allow the use of GNU shtool's install command. +- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then +- # Aesthetically quote it. +- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) +- arg="\"$arg\"" +- ;; ++ case " $deplibs" in ++ *\ -l* | *\ -L*) ++ func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac +- install_prog="$arg " +- arg="$1" +- shift +- else +- install_prog= +- arg="$nonopt" +- fi --# The archiver. --AR=$lt_AR --AR_FLAGS=$lt_AR_FLAGS +- # The real first argument should be the name of the installation program. +- # Aesthetically quote it. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) +- arg="\"$arg\"" +- ;; +- esac +- install_prog="$install_prog$arg" ++ test -n "$rpath" && \ ++ func_warning "\`-rpath' is ignored for objects" --# A C compiler. --LTCC=$lt_LTCC +- # We need to accept at least all the BSD install flags. +- dest= +- files= +- opts= +- prev= +- install_type= +- isdir=no +- stripme= +- for arg +- do +- if test -n "$dest"; then +- files="$files $dest" +- dest="$arg" +- continue +- fi ++ test -n "$xrpath" && \ ++ func_warning "\`-R' is ignored for objects" --# A language-specific compiler. --CC=$lt_compiler_RC +- case $arg in +- -d) isdir=yes ;; +- -f) prev="-f" ;; +- -g) prev="-g" ;; +- -m) prev="-m" ;; +- -o) prev="-o" ;; +- -s) +- stripme=" -s" +- continue +- ;; +- -*) ;; ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info' is ignored for objects" --# Is the compiler the GNU C compiler? --with_gcc=$GCC_RC ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for objects" ++ ++ case $output in ++ *.lo) ++ test -n "$objs$old_deplibs" && \ ++ func_fatal_error "cannot build library object \`$output' from non-libtool objects" ++ ++ libobj=$output ++ func_lo2o "$libobj" ++ obj=$func_lo2o_result ++ ;; + *) +- # If the previous option needed an argument, then skip it. +- if test -n "$prev"; then +- prev= +- else +- dest="$arg" +- continue +- fi ++ libobj= ++ obj="$output" + ;; + esac --# An ERE matcher. --EGREP=$lt_EGREP -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -+$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -+hardcode_action_CXX= -+if test -n "$hardcode_libdir_flag_spec_CXX" || -+ test -n "$runpath_var_CXX" || -+ test "X$hardcode_automatic_CXX" = "Xyes" ; then +- # Aesthetically quote the argument. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*) +- arg="\"$arg\"" +- ;; +- esac +- install_prog="$install_prog $arg" +- done ++ # Delete the old objects. ++ $opt_dry_run || $RM $obj $libobj --# The linker used to build libraries. --LD=$lt_LD_RC -+ # We can hardcode non-existent directories. -+ if test "$hardcode_direct_CXX" != no && -+ # If the only mechanism to avoid hardcoding is shlibpath_var, we -+ # have to relink, otherwise we might link with an installed library -+ # when we should be linking with a yet-to-be-installed one -+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && -+ test "$hardcode_minus_L_CXX" != no; then -+ # Linking always hardcodes the temporary library directory. -+ hardcode_action_CXX=relink -+ else -+ # We can link without hardcoding, and we can hardcode nonexisting dirs. -+ hardcode_action_CXX=immediate -+ fi -+else -+ # We cannot hardcode anything, or else we can only hardcode existing -+ # directories. -+ hardcode_action_CXX=unsupported -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 -+$as_echo "$hardcode_action_CXX" >&6; } +- if test -z "$install_prog"; then +- $echo "$modename: you must specify an install program" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ # Objects from convenience libraries. This assumes ++ # single-version convenience libraries. Whenever we create ++ # different ones for PIC/non-PIC, this we'll have to duplicate ++ # the extraction. ++ reload_conv_objs= ++ gentop= ++ # reload_cmds runs $LD directly, so let us get rid of ++ # -Wl from whole_archive_flag_spec and hope we can get by with ++ # turning comma into space.. ++ wl= --# Whether we need hard or soft links. --LN_S=$lt_LN_S -+if test "$hardcode_action_CXX" = relink || -+ test "$inherit_rpath_CXX" = yes; then -+ # Fast installation is not supported -+ enable_fast_install=no -+elif test "$shlibpath_overrides_runpath" = yes || -+ test "$enable_shared" = no; then -+ # Fast installation is not necessary -+ enable_fast_install=needless -+fi +- if test -n "$prev"; then +- $echo "$modename: the \`$prev' option requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec"; then ++ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" ++ reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` ++ else ++ gentop="$output_objdir/${obj}x" ++ generated="$generated $gentop" --# A BSD-compatible nm program. --NM=$lt_NM +- if test -z "$files"; then +- if test -z "$dest"; then +- $echo "$modename: no file or destination specified" 1>&2 +- else +- $echo "$modename: you must specify a destination" 1>&2 ++ func_extract_archives $gentop $convenience ++ reload_conv_objs="$reload_objs $func_extract_archives_result" ++ fi + fi +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi --# A symbol stripping program --STRIP=$lt_STRIP +- # Strip any trailing slash from the destination. +- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` ++ # Create the old-style object. ++ reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test --# Used to examine libraries when file_magic_cmd begins "file" --MAGIC_CMD=$MAGIC_CMD +- # Check to see that the destination is a directory. +- test -d "$dest" && isdir=yes +- if test "$isdir" = yes; then +- destdir="$dest" +- destname= +- else +- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` +- test "X$destdir" = "X$dest" && destdir=. +- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` ++ output="$obj" ++ func_execute_cmds "$reload_cmds" 'exit $?' --# Used on cygwin: DLL creation program. --DLLTOOL="$DLLTOOL" +- # Not a directory, so check to see that there is only one file specified. +- set dummy $files +- if test "$#" -gt 2; then +- $echo "$modename: \`$dest' is not a directory" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ # Exit if we aren't doing a library object file. ++ if test -z "$libobj"; then ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ exit $EXIT_SUCCESS + fi +- fi +- case $destdir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- for file in $files; do +- case $file in +- *.lo) ;; +- *) +- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- done ++ ++ if test "$build_libtool_libs" != yes; then ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ # Create an invalid libtool object if no PIC, so that we don't ++ # accidentally link it into a program. ++ # $show "echo timestamp > $libobj" ++ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? ++ exit $EXIT_SUCCESS ++ fi ++ ++ if test -n "$pic_flag" || test "$pic_mode" != default; then ++ # Only do commands if we really have different PIC objects. ++ reload_objs="$libobjs $reload_conv_objs" ++ output="$libobj" ++ func_execute_cmds "$reload_cmds" 'exit $?' ++ fi ++ ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ exit $EXIT_SUCCESS + ;; +- esac --# Used on cygwin: object dumper. --OBJDUMP="$OBJDUMP" +- # This variable tells wrapper scripts just to set variables rather +- # than running their programs. +- libtool_install_magic="$magic" ++ prog) ++ case $host in ++ *cygwin*) func_stripname '' '.exe' "$output" ++ output=$func_stripname_result.exe;; ++ esac ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info' is ignored for programs" --# Used on cygwin: assembler. --AS="$AS" +- staticlibs= +- future_libdirs= +- current_libdirs= +- for file in $files; do ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for programs" --# The name of the directory that contains temporary libtool files. --objdir=$objdir -+ fi # test -n "$compiler" +- # Do each installation. +- case $file in +- *.$libext) +- # Do the static libraries later. +- staticlibs="$staticlibs $file" ++ test "$preload" = yes \ ++ && test "$dlopen_support" = unknown \ ++ && test "$dlopen_self" = unknown \ ++ && test "$dlopen_self_static" = unknown && \ ++ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." ++ ++ case $host in ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library is the System framework ++ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ++ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; ++ esac --# How to create reloadable object files. --reload_flag=$lt_reload_flag --reload_cmds=$lt_reload_cmds -+ CC=$lt_save_CC -+ LDCXX=$LD -+ LD=$lt_save_LD -+ GCC=$lt_save_GCC -+ with_gnu_ld=$lt_save_with_gnu_ld -+ lt_cv_path_LDCXX=$lt_cv_path_LD -+ lt_cv_path_LD=$lt_save_path_LD -+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -+fi # test "$_lt_caught_CXX_error" != yes +- *.la) +- # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : +- else +- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ case $host in ++ *-*-darwin*) ++ # Don't allow lazy linking, it breaks C++ global constructors ++ # But is supposedly fixed on 10.4 or later (yay!). ++ if test "$tagname" = CXX ; then ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in ++ 10.[0123]) ++ compile_command="$compile_command ${wl}-bind_at_load" ++ finalize_command="$finalize_command ${wl}-bind_at_load" ++ ;; ++ esac + fi ++ # Time to change all our "foo.ltframework" stuff back to "-framework foo" ++ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` ++ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% $[^ $]*$.ltframework% -framework \1%g'` ++ ;; ++ esac --# How to pass a linker flag through the compiler. --wl=$lt_lt_prog_compiler_wl_RC -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu +- library_names= +- old_library= +- relink_command= +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; ++ ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $compile_deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $compile_deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; + esac ++ done ++ compile_deplibs="$new_libs" --# Object file suffix (normally "o"). --objext="$ac_objext" +- # Add the libdir to current_libdirs if it is the destination. +- if test "X$destdir" = "X$libdir"; then +- case "$current_libdirs " in ++ ++ compile_command="$compile_command $compile_deplibs" ++ finalize_command="$finalize_command $finalize_deplibs" ++ ++ if test -n "$rpath$xrpath"; then ++ # If the user specified any rpath flags, then add them. ++ for libdir in $rpath $xrpath; do ++ # This is the magic to use -rpath. ++ case "$finalize_rpath " in + *" $libdir "*) ;; +- *) current_libdirs="$current_libdirs $libdir" ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ;; + esac +- else +- # Note the libdir as a future libdir. +- case "$future_libdirs " in ++ done ++ fi ++ ++ # Now hardcode the library paths ++ rpath= ++ hardcode_libdirs= ++ for libdir in $compile_rpath $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ rpath="$rpath $flag" ++ fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in + *" $libdir "*) ;; +- *) future_libdirs="$future_libdirs $libdir" ;; ++ *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) ++ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` ++ case :$dllsearchpath: in ++ *":$libdir:"*) ;; ++ ::) dllsearchpath=$libdir;; ++ *) dllsearchpath="$dllsearchpath:$libdir";; ++ esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ ::) dllsearchpath=$testbindir;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac ++ ;; ++ esac ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ compile_rpath="$rpath" --# Old archive suffix (normally "a"). --libext="$libext" +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ +- test "X$dir" = "X$file/" && dir= +- dir="$dir$objdir" +- +- if test -n "$relink_command"; then +- # Determine the prefix the user has applied to our future dir. +- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` +- +- # Don't allow the user to place us outside of our expected +- # location b/c this prevents finding dependent libraries that +- # are installed to the same prefix. +- # At present, this check doesn't affect windows .dll's that +- # are installed into $libdir/../bin (currently, that works fine) +- # but it's something to keep an eye on. +- if test "$inst_prefix_dir" = "$destdir"; then +- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 +- exit $EXIT_FAILURE +- fi +- +- if test -n "$inst_prefix_dir"; then +- # Stick the inst_prefix_dir data into the link command. +- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` +- else +- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` +- fi +- +- $echo "$modename: warning: relinking \`$file'" 1>&2 +- $show "$relink_command" +- if $run eval "$relink_command"; then : ++ rpath= ++ hardcode_libdirs= ++ for libdir in $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi + else +- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 +- exit $EXIT_FAILURE ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ rpath="$rpath $flag" + fi ++ elif test -n "$runpath_var"; then ++ case "$finalize_perm_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; ++ esac + fi ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ finalize_rpath="$rpath" --# Shared library suffix (normally ".so"). --shrext_cmds='$shrext_cmds' +- # See the names of the shared library. +- set dummy $library_names +- if test -n "$2"; then +- realname="$2" +- shift +- shift ++ if test -n "$libobjs" && test "$build_old_libs" = yes; then ++ # Transform all the library objects into standard objects. ++ compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ fi --# Executable file suffix (normally ""). --exeext="$exeext" +- srcname="$realname" +- test -n "$relink_command" && srcname="$realname"T ++ func_generate_dlsyms "$outputname" "@PROGRAM@" "no" --# Additional compiler flags for building library objects. --pic_flag=$lt_lt_prog_compiler_pic_RC --pic_mode=$pic_mode +- # Install the shared library and build the symlinks. +- $show "$install_prog $dir/$srcname $destdir/$realname" +- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? +- if test -n "$stripme" && test -n "$striplib"; then +- $show "$striplib $destdir/$realname" +- $run eval "$striplib $destdir/$realname" || exit $? +- fi ++ # template prelinking step ++ if test -n "$prelink_cmds"; then ++ func_execute_cmds "$prelink_cmds" 'exit $?' ++ fi --# What is the maximum length of a command? --max_cmd_len=$lt_cv_sys_max_cmd_len +- if test "$#" -gt 0; then +- # Delete the old symlinks, and create new ones. +- for linkname +- do +- if test "$linkname" != "$realname"; then +- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" +- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" +- fi +- done +- fi ++ wrappers_required=yes ++ case $host in ++ *cygwin* | *mingw* ) ++ if test "$build_libtool_libs" != yes; then ++ wrappers_required=no ++ fi ++ ;; ++ *cegcc) ++ # Disable wrappers for cegcc, we are cross compiling anyway. ++ wrappers_required=no ++ ;; ++ *) ++ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then ++ wrappers_required=no ++ fi ++ ;; ++ esac ++ if test "$wrappers_required" = no; then ++ # Replace the output file specification. ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` ++ link_command="$compile_command$compile_rpath" --# Does compiler simultaneously support -c and -o options? --compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC +- # Do each command in the postinstall commands. +- lib="$destdir/$realname" +- cmds=$postinstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi ++ # We have no uninstalled library dependencies, so finalize right now. ++ exit_status=0 ++ func_show_eval "$link_command" 'exit_status=$?' --# Must we lock files when doing compilation ? --need_locks=$lt_need_locks +- # Install the pseudo-library for information purposes. +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- instname="$dir/$name"i +- $show "$install_prog $instname $destdir/$name" +- $run eval "$install_prog $instname $destdir/$name" || exit $? ++ # Delete the generated files. ++ if test -f "$output_objdir/${outputname}S.${objext}"; then ++ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' ++ fi --# Do we need the lib prefix for modules? --need_lib_prefix=$need_lib_prefix +- # Maybe install the static library, too. +- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" +- ;; ++ exit $exit_status ++ fi --# Do we need a version for libraries? --need_version=$need_version +- *.lo) +- # Install (i.e. copy) a libtool object. ++ if test -n "$compile_shlibpath$finalize_shlibpath"; then ++ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" ++ fi ++ if test -n "$finalize_shlibpath"; then ++ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" ++ fi --# Whether dlopen is supported. --dlopen_support=$enable_dlopen +- # Figure out destination file name, if it wasn't already specified. +- if test -n "$destname"; then +- destfile="$destdir/$destname" +- else +- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- destfile="$destdir/$destfile" ++ compile_var= ++ finalize_var= ++ if test -n "$runpath_var"; then ++ if test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi +- +- # Deduce the name of the destination old-style object file. +- case $destfile in +- *.lo) +- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` +- ;; +- *.$objext) +- staticdest="$destfile" +- destfile= +- ;; +- *) +- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- +- # Install the libtool object if requested. +- if test -n "$destfile"; then +- $show "$install_prog $file $destfile" +- $run eval "$install_prog $file $destfile" || exit $? ++ if test -n "$finalize_perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $finalize_perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi ++ fi --# Whether dlopen of programs is supported. --dlopen_self=$enable_dlopen_self +- # Install the old object if enabled. +- if test "$build_old_libs" = yes; then +- # Deduce the name of the old-style object file. +- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` +- +- $show "$install_prog $staticobj $staticdest" +- $run eval "$install_prog \$staticobj \$staticdest" || exit $? +- fi ++ if test "$no_install" = yes; then ++ # We don't need to create a wrapper script. ++ link_command="$compile_var$compile_command$compile_rpath" ++ # Replace the output file specification. ++ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` ++ # Delete the old output file. ++ $opt_dry_run || $RM $output ++ # Link the executable and exit ++ func_show_eval "$link_command" 'exit $?' + exit $EXIT_SUCCESS +- ;; ++ fi --# Whether dlopen of statically linked programs is supported. --dlopen_self_static=$enable_dlopen_self_static -+ ac_config_commands="$ac_config_commands libtool" +- *) +- # Figure out destination file name, if it wasn't already specified. +- if test -n "$destname"; then +- destfile="$destdir/$destname" ++ if test "$hardcode_action" = relink; then ++ # Fast installation is not supported ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" ++ ++ func_warning "this platform does not like uninstalled shared libraries" ++ func_warning "\`$output' will be relinked during installation" ++ else ++ if test "$fast_install" != no; then ++ link_command="$finalize_var$compile_command$finalize_rpath" ++ if test "$fast_install" = yes; then ++ relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` ++ else ++ # fast_install is set to needless ++ relink_command= ++ fi + else +- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- destfile="$destdir/$destfile" ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" + fi ++ fi --# Compiler flag to prevent dynamic linking. --link_static_flag=$lt_lt_prog_compiler_static_RC +- # If the file is missing, and there is a .exe on the end, strip it +- # because it is most likely a libtool script we actually want to +- # install +- stripped_ext="" +- case $file in +- *.exe) +- if test ! -f "$file"; then +- file=`$echo $file|${SED} 's,.exe$,,'` +- stripped_ext=".exe" +- fi +- ;; +- esac +- +- # Do a test to see if this is really a libtool program. +- case $host in +- *cygwin*|*mingw*) +- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` +- ;; +- *) +- wrapper=$file +- ;; +- esac +- if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then +- notinst_deplibs= +- relink_command= +- +- # To insure that "foo" is sourced, and not "foo.exe", +- # finese the cygwin/MSYS system by explicitly sourcing "foo." +- # which disallows the automatic-append-.exe behavior. +- case $build in +- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; +- *) wrapperdot=${wrapper} ;; +- esac +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . ${wrapperdot} ;; +- *) . ./${wrapperdot} ;; +- esac +- +- # Check the variables that should have been set. +- if test -z "$notinst_deplibs"; then +- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 +- exit $EXIT_FAILURE +- fi ++ # Replace the output file specification. ++ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` --# Compiler flag to turn off builtin functions. --no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC +- finalize=yes +- for lib in $notinst_deplibs; do +- # Check to see that each library is installed. +- libdir= +- if test -f "$lib"; then +- # If there is no directory component, then add one. +- case $lib in +- */* | *\\*) . $lib ;; +- *) . ./$lib ;; +- esac +- fi +- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test +- if test -n "$libdir" && test ! -f "$libfile"; then +- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 +- finalize=no +- fi +- done ++ # Delete the old output files. ++ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname --# Compiler flag to allow reflexive dlopens. --export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC +- relink_command= +- # To insure that "foo" is sourced, and not "foo.exe", +- # finese the cygwin/MSYS system by explicitly sourcing "foo." +- # which disallows the automatic-append-.exe behavior. +- case $build in +- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; +- *) wrapperdot=${wrapper} ;; +- esac +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . ${wrapperdot} ;; +- *) . ./${wrapperdot} ;; +- esac ++ func_show_eval "$link_command" 'exit $?' --# Compiler flag to generate shared objects directly from archives. --whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC -+# Only expand once: +- outputname= +- if test "$fast_install" = no && test -n "$relink_command"; then +- if test "$finalize" = yes && test -z "$run"; then +- tmpdir="/tmp" +- test -n "$TMPDIR" && tmpdir="$TMPDIR" +- tmpdir="$tmpdir/libtool-$$" +- save_umask=`umask` +- umask 0077 +- if $mkdir "$tmpdir"; then +- umask $save_umask +- else +- umask $save_umask +- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 +- continue +- fi +- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` +- outputname="$tmpdir/$file" +- # Replace the output file specification. +- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` ++ # Now create the wrapper script. ++ func_verbose "creating $output" --# Compiler flag to generate thread-safe objects. --thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC +- $show "$relink_command" +- if $run eval "$relink_command"; then : +- else +- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 +- ${rm}r "$tmpdir" +- continue +- fi +- file="$outputname" +- else +- $echo "$modename: warning: cannot relink \`$file'" 1>&2 +- fi ++ # Quote the relink command for shipping. ++ if test -n "$relink_command"; then ++ # Preserve any variables that may affect compiler behavior ++ for var in $variables_saved_for_relink; do ++ if eval test -z \"\${$var+set}\"; then ++ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" ++ elif eval var_value=\$$var; test -z "$var_value"; then ++ relink_command="$var=; export $var; $relink_command" + else +- # Install the binary that we compiled earlier. +- file=`$echo "X$file$stripped_ext" | $Xsed -e "s%$[^/]*$$%$objdir/\1%"` ++ func_quote_for_eval "$var_value" ++ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi +- fi ++ done ++ relink_command="(cd `pwd`; $relink_command)" ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ fi --# Library versioning type. --version_type=$version_type +- # remove .exe since cygwin /usr/bin/install will append another +- # one anyways +- case $install_prog,$host in +- */usr/bin/install*,*cygwin*) +- case $file:$destfile in +- *.exe:*.exe) +- # this is ok +- ;; +- *.exe:*) +- destfile=$destfile.exe +- ;; +- *:*.exe) +- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` +- ;; +- esac +- ;; ++ # Quote $ECHO for shipping. ++ if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then ++ case $progpath in ++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; ++ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac +- $show "$install_prog$stripme $file $destfile" +- $run eval "$install_prog\$stripme \$file \$destfile" || exit $? +- test -n "$outputname" && ${rm}r "$tmpdir" +- ;; +- esac +- done ++ qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` ++ else ++ qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` ++ fi --# Format of library name prefix. --libname_spec=$lt_libname_spec -+# Checks for libraries. +- for file in $staticlibs; do +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ # Only actually do things if not in dry run mode. ++ $opt_dry_run || { ++ # win32 will think the script is a binary if it has ++ # a .exe suffix, so we strip it off here. ++ case $output in ++ *.exe) func_stripname '' '.exe' "$output" ++ output=$func_stripname_result ;; ++ esac ++ # test for cygwin because mv fails w/o .exe extensions ++ case $host in ++ *cygwin*) ++ exeext=.exe ++ func_stripname '' '.exe' "$outputname" ++ outputname=$func_stripname_result ;; ++ *) exeext= ;; ++ esac ++ case $host in ++ *cygwin* | *mingw* ) ++ func_dirname_and_basename "$output" "" "." ++ output_name=$func_basename_result ++ output_path=$func_dirname_result ++ cwrappersource="$output_path/$objdir/lt-$output_name.c" ++ cwrapper="$output_path/$output_name.exe" ++ $RM $cwrappersource $cwrapper ++ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 ++ ++ func_emit_cwrapperexe_src > $cwrappersource ++ ++ # The wrapper executable is built using the $host compiler, ++ # because it contains $host paths and files. If cross- ++ # compiling, it, like the target executable, must be ++ # executed on the $host or under an emulation environment. ++ $opt_dry_run || { ++ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource ++ $STRIP $cwrapper ++ } ++ ++ # Now, create the wrapper script for func_source use: ++ func_ltwrapper_scriptname $cwrapper ++ $RM $func_ltwrapper_scriptname_result ++ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 ++ $opt_dry_run || { ++ # note: this script will not be executed, so do not chmod. ++ if test "x$build" = "x$host" ; then ++ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result ++ else ++ func_emit_wrapper no > $func_ltwrapper_scriptname_result ++ fi ++ } ++ ;; ++ * ) ++ $RM $output ++ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 --# List of archive names. First name is the real one, the rest are links. --# The last name is the one that the linker finds with -lNAME. --library_names_spec=$lt_library_names_spec -+# Checks for header files. -+ac_header_dirent=no -+for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do -+ as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5 -+$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } -+if eval "test \"\${$as_ac_Header+set}\"" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include -+#include <$ac_hdr> +- # Set up the ranlib parameters. +- oldlib="$destdir/$name" ++ func_emit_wrapper no > $output ++ chmod +x $output ++ ;; ++ esac ++ } ++ exit $EXIT_SUCCESS ++ ;; ++ esac --# The coded name of the library, if different from the real name. --soname_spec=$lt_soname_spec -+int -+main () -+{ -+if ((DIR *) 0) -+return 0; -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ eval "$as_ac_Header=yes" -+else -+ eval "$as_ac_Header=no" -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+eval ac_res=\$$as_ac_Header -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -+$as_echo "$ac_res" >&6; } -+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : -+ cat >>confdefs.h <<_ACEOF -+#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 -+_ACEOF +- $show "$install_prog $file $oldlib" +- $run eval "$install_prog \$file \$oldlib" || exit $? ++ # See if we need to build an old-fashioned archive. ++ for oldlib in $oldlibs; do --# Commands used to build and install an old-style archive. --RANLIB=$lt_RANLIB --old_archive_cmds=$lt_old_archive_cmds_RC --old_postinstall_cmds=$lt_old_postinstall_cmds --old_postuninstall_cmds=$lt_old_postuninstall_cmds -+ac_header_dirent=$ac_hdr; break -+fi +- if test -n "$stripme" && test -n "$old_striplib"; then +- $show "$old_striplib $oldlib" +- $run eval "$old_striplib $oldlib" || exit $? ++ if test "$build_libtool_libs" = convenience; then ++ oldobjs="$libobjs_save $symfileobj" ++ addlibs="$convenience" ++ build_libtool_libs=no ++ else ++ if test "$build_libtool_libs" = module; then ++ oldobjs="$libobjs_save" ++ build_libtool_libs=no ++ else ++ oldobjs="$old_deplibs $non_pic_objects" ++ if test "$preload" = yes && test -f "$symfileobj"; then ++ oldobjs="$oldobjs $symfileobj" ++ fi ++ fi ++ addlibs="$old_convenience" + fi --# Create an old-style archive from a shared archive. --old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC -+done -+# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. -+if test $ac_header_dirent = dirent.h; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 -+$as_echo_n "checking for library containing opendir... " >&6; } -+if test "${ac_cv_search_opendir+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_func_search_save_LIBS=$LIBS -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ +- # Do each command in the postinstall commands. +- cmds=$old_postinstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- done ++ if test -n "$addlibs"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" --# Create a temporary old-style archive to link instead of a shared archive. --old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+char opendir (); -+int -+main () -+{ -+return opendir (); -+ ; -+ return 0; -+} -+_ACEOF -+for ac_lib in '' dir; do -+ if test -z "$ac_lib"; then -+ ac_res="none required" -+ else -+ ac_res=-l$ac_lib -+ LIBS="-l$ac_lib $ac_func_search_save_LIBS" -+ fi -+ if ac_fn_c_try_link "$LINENO"; then : -+ ac_cv_search_opendir=$ac_res -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext -+ if test "${ac_cv_search_opendir+set}" = set; then : -+ break -+fi -+done -+if test "${ac_cv_search_opendir+set}" = set; then : +- if test -n "$future_libdirs"; then +- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 +- fi ++ func_extract_archives $gentop $addlibs ++ oldobjs="$oldobjs $func_extract_archives_result" ++ fi --# Commands used to build and install a shared archive. --archive_cmds=$lt_archive_cmds_RC --archive_expsym_cmds=$lt_archive_expsym_cmds_RC --postinstall_cmds=$lt_postinstall_cmds --postuninstall_cmds=$lt_postuninstall_cmds -+else -+ ac_cv_search_opendir=no -+fi -+rm conftest.$ac_ext -+LIBS=$ac_func_search_save_LIBS -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 -+$as_echo "$ac_cv_search_opendir" >&6; } -+ac_res=$ac_cv_search_opendir -+if test "$ac_res" != no; then : -+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" +- if test -n "$current_libdirs"; then +- # Maybe just do a dry run. +- test -n "$run" && current_libdirs=" -n$current_libdirs" +- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' +- else +- exit $EXIT_SUCCESS +- fi +- ;; ++ # Do each command in the archive commands. ++ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then ++ cmds=$old_archive_from_new_cmds ++ else --# Commands used to build a loadable module (assumed same as above if empty) --module_cmds=$lt_module_cmds_RC --module_expsym_cmds=$lt_module_expsym_cmds_RC -+fi +- # libtool finish mode +- finish) +- modename="$modename: finish" +- libdirs="$nonopt" +- admincmds= ++ # Add any objects from preloaded convenience libraries ++ if test -n "$dlprefiles"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" --# Commands to strip libraries. --old_striplib=$lt_old_striplib --striplib=$lt_striplib -+else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 -+$as_echo_n "checking for library containing opendir... " >&6; } -+if test "${ac_cv_search_opendir+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_func_search_save_LIBS=$LIBS -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ +- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then +- for dir +- do +- libdirs="$libdirs $dir" +- done ++ func_extract_archives $gentop $dlprefiles ++ oldobjs="$oldobjs $func_extract_archives_result" ++ fi --# Dependencies to place before the objects being linked to create a --# shared library. --predep_objects=$lt_predep_objects_RC +- for libdir in $libdirs; do +- if test -n "$finish_cmds"; then +- # Do each command in the finish commands. +- cmds=$finish_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || admincmds="$admincmds +- $cmd" ++ # POSIX demands no paths to be encoded in archives. We have ++ # to avoid creating archives with duplicate basenames if we ++ # might have to extract them afterwards, e.g., when creating a ++ # static archive out of a convenience library, or when linking ++ # the entirety of a libtool archive into another (currently ++ # not supported by libtool). ++ if (for obj in $oldobjs ++ do ++ func_basename "$obj" ++ $ECHO "$func_basename_result" ++ done | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ $ECHO "copying selected object files to avoid basename conflicts..." ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ func_mkdir_p "$gentop" ++ save_oldobjs=$oldobjs ++ oldobjs= ++ counter=1 ++ for obj in $save_oldobjs ++ do ++ func_basename "$obj" ++ objbase="$func_basename_result" ++ case " $oldobjs " in ++ " ") oldobjs=$obj ;; ++ *[\ /]"$objbase "*) ++ while :; do ++ # Make sure we don't pick an alternate name that also ++ # overlaps. ++ newobj=lt$counter-$objbase ++ func_arith $counter + 1 ++ counter=$func_arith_result ++ case " $oldobjs " in ++ *[\ /]"$newobj "*) ;; ++ *) if test ! -f "$gentop/$newobj"; then break; fi ;; ++ esac ++ done ++ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" ++ oldobjs="$oldobjs $gentop/$newobj" ++ ;; ++ *) oldobjs="$oldobjs $obj" ;; ++ esac + done +- IFS="$save_ifs" +- fi +- if test -n "$finish_eval"; then +- # Do the single finish_eval. +- eval cmds=\"$finish_eval\" +- $run eval "$cmds" || admincmds="$admincmds +- $cmds" + fi +- done +- fi - --# Dependencies to place after the objects being linked to create a --# shared library. --postdep_objects=$lt_postdep_objects_RC +- # Exit here if they wanted silent mode. +- test "$show" = : && exit $EXIT_SUCCESS ++ eval cmds=\"$old_archive_cmds\" + +- $echo "----------------------------------------------------------------------" +- $echo "Libraries have been installed in:" +- for libdir in $libdirs; do +- $echo " $libdir" ++ func_len " $cmds" ++ len=$func_len_result ++ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ cmds=$old_archive_cmds ++ else ++ # the command line is too long to link in one step, link in parts ++ func_verbose "using piecewise archive linking..." ++ save_RANLIB=$RANLIB ++ RANLIB=: ++ objlist= ++ concat_cmds= ++ save_oldobjs=$oldobjs ++ oldobjs= ++ # Is there a better way of finding the last object in the list? ++ for obj in $save_oldobjs ++ do ++ last_oldobj=$obj ++ done ++ eval test_cmds=\"$old_archive_cmds\" ++ func_len " $test_cmds" ++ len0=$func_len_result ++ len=$len0 ++ for obj in $save_oldobjs ++ do ++ func_len " $obj" ++ func_arith $len + $func_len_result ++ len=$func_arith_result ++ func_append objlist " $obj" ++ if test "$len" -lt "$max_cmd_len"; then ++ : ++ else ++ # the above command should be used before it gets too long ++ oldobjs=$objlist ++ if test "$obj" = "$last_oldobj" ; then ++ RANLIB=$save_RANLIB ++ fi ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" ++ objlist= ++ len=$len0 ++ fi ++ done ++ RANLIB=$save_RANLIB ++ oldobjs=$objlist ++ if test "X$oldobjs" = "X" ; then ++ eval cmds=\"\$concat_cmds\" ++ else ++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\" ++ fi ++ fi ++ fi ++ func_execute_cmds "$cmds" 'exit $?' + done +- $echo +- $echo "If you ever happen to want to link against installed libraries" +- $echo "in a given directory, LIBDIR, you must either use libtool, and" +- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" +- $echo "flag during linking and do at least one of the following:" +- if test -n "$shlibpath_var"; then +- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" +- $echo " during execution" +- fi +- if test -n "$runpath_var"; then +- $echo " - add LIBDIR to the \`$runpath_var' environment variable" +- $echo " during linking" +- fi +- if test -n "$hardcode_libdir_flag_spec"; then +- libdir=LIBDIR +- eval flag=\"$hardcode_libdir_flag_spec\" - --# Dependencies to place before the objects being linked to create a --# shared library. --predeps=$lt_predeps_RC +- $echo " - use the \`$flag' linker flag" +- fi +- if test -n "$admincmds"; then +- $echo " - have your system administrator run these commands:$admincmds" +- fi +- if test -f /etc/ld.so.conf; then +- $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" +- fi +- $echo +- $echo "See any operating system documentation about shared libraries for" +- $echo "more information, such as the ld(1) and ld.so(8) manual pages." +- $echo "----------------------------------------------------------------------" +- exit $EXIT_SUCCESS +- ;; + +- # libtool execute mode +- execute) +- modename="$modename: execute" - --# Dependencies to place after the objects being linked to create a --# shared library. --postdeps=$lt_postdeps_RC -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ -+#ifdef __cplusplus -+extern "C" -+#endif -+char opendir (); -+int -+main () -+{ -+return opendir (); -+ ; -+ return 0; -+} -+_ACEOF -+for ac_lib in '' x; do -+ if test -z "$ac_lib"; then -+ ac_res="none required" -+ else -+ ac_res=-l$ac_lib -+ LIBS="-l$ac_lib $ac_func_search_save_LIBS" -+ fi -+ if ac_fn_c_try_link "$LINENO"; then : -+ ac_cv_search_opendir=$ac_res -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext -+ if test "${ac_cv_search_opendir+set}" = set; then : -+ break -+fi -+done -+if test "${ac_cv_search_opendir+set}" = set; then : +- # The first argument is the command name. +- cmd="$nonopt" +- if test -z "$cmd"; then +- $echo "$modename: you must specify a COMMAND" 1>&2 +- $echo "$help" +- exit $EXIT_FAILURE +- fi ++ test -n "$generated" && \ ++ func_show_eval "${RM}r$generated" --# The library search path used internally by the compiler when linking --# a shared library. --compiler_lib_search_path=$lt_compiler_lib_search_path_RC -+else -+ ac_cv_search_opendir=no -+fi -+rm conftest.$ac_ext -+LIBS=$ac_func_search_save_LIBS -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 -+$as_echo "$ac_cv_search_opendir" >&6; } -+ac_res=$ac_cv_search_opendir -+if test "$ac_res" != no; then : -+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" +- # Handle -dlopen flags immediately. +- for file in $execute_dlfiles; do +- if test ! -f "$file"; then +- $echo "$modename: \`$file' is not a file" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ # Now create the libtool archive. ++ case $output in ++ *.la) ++ old_library= ++ test "$build_old_libs" = yes && old_library="$libname.$libext" ++ func_verbose "creating $output" --# Method to check whether dependent libraries are shared objects. --deplibs_check_method=$lt_deplibs_check_method -+fi +- dir= +- case $file in +- *.la) +- # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ # Preserve any variables that may affect compiler behavior ++ for var in $variables_saved_for_relink; do ++ if eval test -z \"\${$var+set}\"; then ++ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" ++ elif eval var_value=\$$var; test -z "$var_value"; then ++ relink_command="$var=; export $var; $relink_command" + else +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ func_quote_for_eval "$var_value" ++ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi ++ done ++ # Quote the link command for shipping. ++ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ if test "$hardcode_automatic" = yes ; then ++ relink_command= ++ fi --# Command to use when deplibs_check_method == file_magic. --file_magic_cmd=$lt_file_magic_cmd -+fi +- # Read the libtool library. +- dlname= +- library_names= ++ # Only create the output if not a dry run. ++ $opt_dry_run || { ++ for installed in no yes; do ++ if test "$installed" = yes; then ++ if test -z "$install_libdir"; then ++ break ++ fi ++ output="$output_objdir/$outputname"i ++ # Replace all uninstalled libtool libraries with the installed ones ++ newdependency_libs= ++ for deplib in $dependency_libs; do ++ case $deplib in ++ *.la) ++ func_basename "$deplib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$deplib' is not a valid libtool archive" ++ newdependency_libs="$newdependency_libs $libdir/$name" ++ ;; ++ *) newdependency_libs="$newdependency_libs $deplib" ;; ++ esac ++ done ++ dependency_libs="$newdependency_libs" ++ newdlfiles= ++ ++ for lib in $dlfiles; do ++ case $lib in ++ *.la) ++ func_basename "$lib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$lib' is not a valid libtool archive" ++ newdlfiles="$newdlfiles $libdir/$name" ++ ;; ++ *) newdlfiles="$newdlfiles $lib" ;; ++ esac ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ case $lib in ++ *.la) ++ # Only pass preopened files to the pseudo-archive (for ++ # eventual linking with the app. that links it) if we ++ # didn't already link the preopened objects directly into ++ # the library: ++ func_basename "$lib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$lib' is not a valid libtool archive" ++ newdlprefiles="$newdlprefiles $libdir/$name" ++ ;; ++ esac ++ done ++ dlprefiles="$newdlprefiles" ++ else ++ newdlfiles= ++ for lib in $dlfiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlfiles="$newdlfiles $abs" ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlprefiles="$newdlprefiles $abs" ++ done ++ dlprefiles="$newdlprefiles" ++ fi ++ $RM $output ++ # place dlname in correct position for cygwin ++ tdlname=$dlname ++ case $host,$output,$installed,$module,$dlname in ++ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; ++ esac ++ $ECHO > $output "\ ++# $outputname - a libtool library file ++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION ++# ++# Please DO NOT delete this file! ++# It is necessary for linking the library. --# Flag that allows shared libraries with undefined symbols to be built. --allow_undefined_flag=$lt_allow_undefined_flag_RC -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -+$as_echo_n "checking for ANSI C header files... " >&6; } -+if test "${ac_cv_header_stdc+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include -+#include -+#include -+#include +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac ++# The name that we can dlopen(3). ++dlname='$tdlname' --# Flag that forces no undefined symbols. --no_undefined_flag=$lt_no_undefined_flag_RC -+int -+main () -+{ +- # Skip this library if it cannot be dlopened. +- if test -z "$dlname"; then +- # Warn if it was a shared library. +- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" +- continue +- fi ++# Names of this library. ++library_names='$library_names' --# Commands used to finish a libtool library installation in a directory. --finish_cmds=$lt_finish_cmds -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_header_stdc=yes -+else -+ ac_cv_header_stdc=no -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$file" && dir=. ++# The name of the static archive. ++old_library='$old_library' --# Same as above, but a single script fragment to be evaled but not shown. --finish_eval=$lt_finish_eval -+if test $ac_cv_header_stdc = yes; then -+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include +- if test -f "$dir/$objdir/$dlname"; then +- dir="$dir/$objdir" +- else +- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 +- exit $EXIT_FAILURE +- fi +- ;; ++# Linker flags that can not go in dependency_libs. ++inherited_linker_flags='$new_inherited_linker_flags' --# Take the output of nm and produce a listing of raw symbols and C names. --global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -+_ACEOF -+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -+ $EGREP "memchr" >/dev/null 2>&1; then : +- *.lo) +- # Just add the directory containing the .lo file. +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$file" && dir=. +- ;; ++# Libraries that this one depends upon. ++dependency_libs='$dependency_libs' --# Transform the output of nm in a proper C declaration --global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -+else -+ ac_cv_header_stdc=no -+fi -+rm -f conftest* +- *) +- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 +- continue +- ;; +- esac ++# Names of additional weak libraries provided by this library ++weak_library_names='$weak_libs' --# Transform the output of nm in a C name address pair --global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -+fi +- # Get the absolute pathname. +- absdir=`cd "$dir" && pwd` +- test -n "$absdir" && dir="$absdir" ++# Version information for $libname. ++current=$current ++age=$age ++revision=$revision --# This is the shared library runtime path variable. --runpath_var=$runpath_var -+if test $ac_cv_header_stdc = yes; then -+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include +- # Now add the directory to shlibpath_var. +- if eval "test -z \"\$$shlibpath_var\""; then +- eval "$shlibpath_var=\"\$dir\"" +- else +- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" +- fi +- done ++# Is this an already installed library? ++installed=$installed --# This is the shared library path variable. --shlibpath_var=$shlibpath_var -+_ACEOF -+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -+ $EGREP "free" >/dev/null 2>&1; then : +- # This variable tells wrapper scripts just to set shlibpath_var +- # rather than running their programs. +- libtool_execute_magic="$magic" ++# Should we warn about portability when linking against -modules? ++shouldnotlink=$module --# Is shlibpath searched before the hard-coded library search path? --shlibpath_overrides_runpath=$shlibpath_overrides_runpath -+else -+ ac_cv_header_stdc=no -+fi -+rm -f conftest* +- # Check if any of the arguments is a wrapper script. +- args= +- for file +- do +- case $file in +- -*) ;; +- *) +- # Do a test to see if this is really a libtool program. +- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac ++# Files to dlopen/dlpreopen ++dlopen='$dlfiles' ++dlpreopen='$dlprefiles' --# How to hardcode a shared library path into an executable. --hardcode_action=$hardcode_action_RC -+fi +- # Transform arg to wrapped name. +- file="$progdir/$program" +- fi +- ;; +- esac +- # Quote arguments (to preserve shell metacharacters). +- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` +- args="$args \"$file\"" +- done ++# Directory that this library needs to be installed in: ++libdir='$install_libdir'" ++ if test "$installed" = no && test "$need_relink" = yes; then ++ $ECHO >> $output "\ ++relink_command=\"$relink_command\"" ++ fi ++ done ++ } --# Whether we should hardcode library paths into libraries. --hardcode_into_libs=$hardcode_into_libs -+if test $ac_cv_header_stdc = yes; then -+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -+ if test "$cross_compiling" = yes; then : -+ : -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include -+#include -+#if ((' ' & 0x0FF) == 0x020) -+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -+#else -+# define ISLOWER(c) \ -+ (('a' <= (c) && (c) <= 'i') \ -+ || ('j' <= (c) && (c) <= 'r') \ -+ || ('s' <= (c) && (c) <= 'z')) -+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -+#endif +- if test -z "$run"; then +- if test -n "$shlibpath_var"; then +- # Export the shlibpath_var. +- eval "export $shlibpath_var" +- fi ++ # Do a symbolic link so that the libtool archive can be found in ++ # LD_LIBRARY_PATH before the program is installed. ++ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ++ ;; ++ esac ++ exit $EXIT_SUCCESS ++} --# Flag to hardcode \$libdir into a binary during linking. --# This must work even if \$libdir does not exist. --hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC -+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -+int -+main () +- # Restore saved environment variables +- if test "${save_LC_ALL+set}" = set; then +- LC_ALL="$save_LC_ALL"; export LC_ALL +- fi +- if test "${save_LANG+set}" = set; then +- LANG="$save_LANG"; export LANG +- fi ++{ test "$mode" = link || test "$mode" = relink; } && ++ func_mode_link ${1+"$@"} + +- # Now prepare to actually exec the command. +- exec_cmd="\$cmd$args" +- else +- # Display what would be done. +- if test -n "$shlibpath_var"; then +- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" +- $echo "export $shlibpath_var" +- fi +- $echo "$cmd$args" +- exit $EXIT_SUCCESS +- fi +- ;; + +- # libtool clean and uninstall mode +- clean | uninstall) +- modename="$modename: $mode" +- rm="$nonopt" ++# func_mode_uninstall arg... ++func_mode_uninstall () +{ -+ int i; -+ for (i = 0; i < 256; i++) -+ if (XOR (islower (i), ISLOWER (i)) -+ || toupper (i) != TOUPPER (i)) -+ return 2; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_run "$LINENO"; then : ++ $opt_debug ++ RM="$nonopt" + files= + rmforce= + exit_status=0 +@@ -6018,30 +8209,28 @@ relink_command=\"$relink_command\"" + for arg + do + case $arg in +- -f) rm="$rm $arg"; rmforce=yes ;; +- -*) rm="$rm $arg" ;; ++ -f) RM="$RM $arg"; rmforce=yes ;; ++ -*) RM="$RM $arg" ;; + *) files="$files $arg" ;; + esac + done --# If ld is used when linking, flag to hardcode \$libdir into --# a binary during linking. This must work even if \$libdir does --# not exist. --hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC -- --# Whether we need a single -rpath flag with a separated argument. --hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC -- --# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the --# resulting binary. --hardcode_direct=$hardcode_direct_RC -- --# Set to yes if using the -LDIR flag during linking hardcodes DIR into the --# resulting binary. --hardcode_minus_L=$hardcode_minus_L_RC -- --# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into --# the resulting binary. --hardcode_shlibpath_var=$hardcode_shlibpath_var_RC -- --# Set to yes if building a shared library automatically hardcodes DIR into the library --# and all subsequent libraries and executables linked against it. --hardcode_automatic=$hardcode_automatic_RC -+else -+ ac_cv_header_stdc=no -+fi -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ -+ conftest.$ac_objext conftest.beam conftest.$ac_ext -+fi +- if test -z "$rm"; then +- $echo "$modename: you must specify an RM program" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ test -z "$RM" && \ ++ func_fatal_help "you must specify an RM program" --# Variables whose values should be saved in libtool wrapper scripts and --# restored at relink time. --variables_saved_for_relink="$variables_saved_for_relink" -+fi -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -+$as_echo "$ac_cv_header_stdc" >&6; } -+if test $ac_cv_header_stdc = yes; then + rmdirs= --# Whether libtool must link a program against all its dependency libraries. --link_all_deplibs=$link_all_deplibs_RC -+$as_echo "#define STDC_HEADERS 1" >>confdefs.h + origobjdir="$objdir" + for file in $files; do +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$dir" = "X$file"; then +- dir=. ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" ++ if test "X$dir" = X.; then + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ func_basename "$file" ++ name="$func_basename_result" + test "$mode" = uninstall && objdir="$dir" --# Compile-time system search path for libraries --sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -+fi + # Remember objdir for removal later, being careful to avoid duplicates +@@ -6053,9 +8242,9 @@ relink_command=\"$relink_command\"" + fi --# Run-time system search path for libraries --sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys/wait.h that is POSIX.1 compatible" >&5 -+$as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; } -+if test "${ac_cv_header_sys_wait_h+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include -+#include -+#ifndef WEXITSTATUS -+# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8) -+#endif -+#ifndef WIFEXITED -+# define WIFEXITED(stat_val) (((stat_val) & 255) == 0) -+#endif + # Don't error if the file doesn't exist and rm -f was used. +- if (test -L "$file") >/dev/null 2>&1 \ +- || (test -h "$file") >/dev/null 2>&1 \ +- || test -f "$file"; then ++ if { test -L "$file"; } >/dev/null 2>&1 || ++ { test -h "$file"; } >/dev/null 2>&1 || ++ test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 +@@ -6069,69 +8258,56 @@ relink_command=\"$relink_command\"" + case $name in + *.la) + # Possibly a libtool archive, so verify it. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- . $dir/$name ++ if func_lalib_p "$file"; then ++ func_source $dir/$name --# Fix the shell variable \$srcfile for the compiler. --fix_srcfile_path="$fix_srcfile_path_RC" -+int -+main () -+{ -+ int s; -+ wait (&s); -+ s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_header_sys_wait_h=yes -+else -+ ac_cv_header_sys_wait_h=no -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_wait_h" >&5 -+$as_echo "$ac_cv_header_sys_wait_h" >&6; } -+if test $ac_cv_header_sys_wait_h = yes; then + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" +- test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" --# Set to yes if exported symbols are required. --always_export_symbols=$always_export_symbols_RC -+$as_echo "#define HAVE_SYS_WAIT_H 1" >>confdefs.h +- if test "$mode" = uninstall; then ++ case "$mode" in ++ clean) ++ case " $library_names " in ++ # " " in the beginning catches empty $dlname ++ *" $dlname "*) ;; ++ *) rmfiles="$rmfiles $objdir/$dlname" ;; ++ esac ++ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ++ ;; ++ uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. +- cmds=$postuninstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" +- if test "$?" -ne 0 && test "$rmforce" != yes; then +- exit_status=1 +- fi +- done +- IFS="$save_ifs" ++ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi --# The commands to list exported symbols. --export_symbols_cmds=$lt_export_symbols_cmds_RC -+fi + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. +- cmds=$old_postuninstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" +- if test "$?" -ne 0 && test "$rmforce" != yes; then +- exit_status=1 +- fi +- done +- IFS="$save_ifs" ++ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. +- fi ++ ;; ++ esac + fi + ;; --# The commands to extract the exported symbol list from a shared archive. --extract_expsyms_cmds=$lt_extract_expsyms_cmds -+for ac_header in fcntl.h malloc.h memory.h stdlib.h string.h strings.h sys/file.h sys/ioctl.h sys/systeminfo.h unistd.h values.h inttypes.h -+do : -+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : -+ cat >>confdefs.h <<_ACEOF -+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -+_ACEOF + *.lo) + # Possibly a libtool object, so verify it. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ if func_lalib_p "$file"; then --# Symbols that should not be listed in the preloaded symbols. --exclude_expsyms=$lt_exclude_expsyms_RC -+fi + # Read the .lo file +- . $dir/$name ++ func_source $dir/$name --# Symbols that must always be exported. --include_expsyms=$lt_include_expsyms_RC -+done + # Add PIC object to the list of files to remove. +- if test -n "$pic_object" \ +- && test "$pic_object" != none; then ++ if test -n "$pic_object" && ++ test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi --# ### END LIBTOOL TAG CONFIG: $tagname -+ac_ext=cpp -+ac_cpp='$CXXCPP $CPPFLAGS' -+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + # Add non-PIC object to the list of files to remove. +- if test -n "$non_pic_object" \ +- && test "$non_pic_object" != none; then ++ if test -n "$non_pic_object" && ++ test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi +@@ -6142,17 +8318,26 @@ relink_command=\"$relink_command\"" + noexename=$name + case $file in + *.exe) +- file=`$echo $file|${SED} 's,.exe$,,'` +- noexename=`$echo $name|${SED} 's,.exe$,,'` ++ func_stripname '' '.exe' "$file" ++ file=$func_stripname_result ++ func_stripname '' '.exe' "$name" ++ noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. +- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- relink_command= +- . $dir/$noexename ++ if func_ltwrapper_p "$file"; then ++ if func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ relink_command= ++ func_source $func_ltwrapper_scriptname_result ++ rmfiles="$rmfiles $func_ltwrapper_scriptname_result" ++ else ++ relink_command= ++ func_source $dir/$noexename ++ fi --__EOF__ + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles +@@ -6167,237 +8352,38 @@ relink_command=\"$relink_command\"" + fi + ;; + esac +- $show "$rm $rmfiles" +- $run $rm $rmfiles || exit_status=1 ++ func_show_eval "$RM $rmfiles" 'exit_status=1' + done + objdir="$origobjdir" -+for ac_header in strstream.h sstream fstream.h fstream iostream.h iostream iomanip.h iomanip -+do : -+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -+ac_fn_cxx_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : -+ cat >>confdefs.h <<_ACEOF -+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -+_ACEOF + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then +- $show "rmdir $dir" +- $run rmdir $dir >/dev/null 2>&1 ++ func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done --else -- # If there is no Makefile yet, we rely on a make rule to execute -- # `config.status --recheck' to rerun these tests and create the -- # libtool script then. -- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` -- if test -f "$ltmain_in"; then -- test -f Makefile && make "$ltmain" -- fi - fi + exit $exit_status +- ;; ++} -+done +- "") +- $echo "$modename: you must specify a MODE" 1>&2 +- $echo "$generic_help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++{ test "$mode" = uninstall || test "$mode" = clean; } && ++ func_mode_uninstall ${1+"$@"} - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' -@@ -19073,4770 +14797,3758 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS con - ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' - ac_compiler_gnu=$ac_cv_c_compiler_gnu +- if test -z "$exec_cmd"; then +- $echo "$modename: invalid operation mode \`$mode'" 1>&2 +- $echo "$generic_help" 1>&2 +- exit $EXIT_FAILURE +- fi +-fi # test -z "$show_help" ++test -z "$mode" && { ++ help="$generic_help" ++ func_fatal_help "you must specify a MODE" ++} ++ ++test -z "$exec_cmd" && \ ++ func_fatal_help "invalid operation mode \`$mode'" --CC="$lt_save_CC" + if test -n "$exec_cmd"; then +- eval exec $exec_cmd ++ eval exec "$exec_cmd" + exit $EXIT_FAILURE + fi + +-# We need to display help for each of the modes. +-case $mode in +-"") $echo \ +-"Usage: $modename [OPTION]... [MODE-ARG]... - -- ;; +-Provide generalized library-building support services. - -- *) -- { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 --echo "$as_me: error: Unsupported tag name: $tagname" >&2;} -- { (exit 1); exit 1; }; } -- ;; -- esac +- --config show all configuration variables +- --debug enable verbose shell tracing +--n, --dry-run display commands without modifying any files +- --features display basic configuration information and exit +- --finish same as \`--mode=finish' +- --help display this help message and exit +- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] +- --quiet same as \`--silent' +- --silent don't print informational messages +- --tag=TAG use configuration variables from tag TAG +- --version print version information - -- # Append the new tag name to the list of available tags. -- if test -n "$tagname" ; then -- available_tags="$available_tags $tagname" -- fi -- fi -- done -- IFS="$lt_save_ifs" +-MODE must be one of the following: - -- # Now substitute the updated list of available tags. -- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then -- mv "${ofile}T" "$ofile" -- chmod +x "$ofile" -- else -- rm -f "${ofile}T" -- { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 --echo "$as_me: error: unable to update list of available tagged configurations." >&2;} -- { (exit 1); exit 1; }; } -- fi --fi +- clean remove files from the build directory +- compile compile a source file into a libtool object +- execute automatically set library path, then run a program +- finish complete the installation of libtool libraries +- install install libraries or executables +- link create a library or an executable +- uninstall remove libraries from an installed directory +- +-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +-a more detailed description of MODE. - +-Report bugs to ." +- exit $EXIT_SUCCESS +- ;; - +-clean) +- $echo \ +-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - --# This can be used to rebuild libtool when needed --LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" +-Remove files from the build directory. - --# Always use our own libtool. --LIBTOOL='$(SHELL) $(top_builddir)/libtool' +-RM is the name of the program to use to delete files associated with each FILE +-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +-to RM. - --# Prevent multiple expansion +-If FILE is a libtool library, object or program, all the files associated +-with it are deleted. Otherwise, only FILE itself is deleted using RM." +- ;; +- +-compile) +- $echo \ +-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE +- +-Compile a source file into a libtool library object. +- +-This mode accepts the following additional options: +- +- -o OUTPUT-FILE set the output file name to OUTPUT-FILE +- -prefer-pic try to building PIC objects only +- -prefer-non-pic try to building non-PIC objects only +- -static always build a \`.o' file suitable for static linking +- +-COMPILE-COMMAND is a command to be used in creating a \`standard' object file +-from the given SOURCEFILE. +- +-The output file name is determined by removing the directory component from +-SOURCEFILE, then substituting the C source code suffix \`.c' with the +-library object suffix, \`.lo'." +- ;; +- +-execute) +- $echo \ +-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... +- +-Automatically set library path, then run a program. +- +-This mode accepts the following additional options: +- +- -dlopen FILE add the directory containing FILE to the library path +- +-This mode sets the library path environment variable according to \`-dlopen' +-flags. +- +-If any of the ARGS are libtool executable wrappers, then they are translated +-into their corresponding uninstalled binary, and any of their required library +-directories are added to the library path. +- +-Then, COMMAND is executed, with ARGS as arguments." +- ;; +- +-finish) +- $echo \ +-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... +- +-Complete the installation of libtool libraries. +- +-Each LIBDIR is a directory that contains libtool libraries. +- +-The commands that this mode executes may require superuser privileges. Use +-the \`--dry-run' option if you just want to see what would be executed." +- ;; +- +-install) +- $echo \ +-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... +- +-Install executables or libraries. +- +-INSTALL-COMMAND is the installation command. The first component should be +-either the \`install' or \`cp' program. +- +-The rest of the components are interpreted as arguments to that command (only +-BSD-compatible install options are recognized)." +- ;; +- +-link) +- $echo \ +-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... +- +-Link object files or libraries together to form another library, or to +-create an executable program. +- +-LINK-COMMAND is a command using the C compiler that you would use to create +-a program from several object files. - +-The following components of LINK-COMMAND are treated specially: +- +- -all-static do not do any dynamic linking at all +- -avoid-version do not add a version suffix if possible +- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime +- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols +- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) +- -export-symbols SYMFILE +- try to export only the symbols listed in SYMFILE +- -export-symbols-regex REGEX +- try to export only the symbols matching REGEX +- -LLIBDIR search LIBDIR for required installed libraries +- -lNAME OUTPUT-FILE requires the installed library libNAME +- -module build a library that can dlopened +- -no-fast-install disable the fast-install mode +- -no-install link a not-installable executable +- -no-undefined declare that a library does not refer to external symbols +- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects +- -objectlist FILE Use a list of object files found in FILE to specify objects +- -precious-files-regex REGEX +- don't remove output files matching REGEX +- -release RELEASE specify package release information +- -rpath LIBDIR the created library will eventually be installed in LIBDIR +- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries +- -static do not do any dynamic linking of libtool libraries +- -version-info CURRENT[:REVISION[:AGE]] +- specify library version info [each variable defaults to 0] +- +-All other options (arguments beginning with \`-') are ignored. +- +-Every other argument is treated as a filename. Files ending in \`.la' are +-treated as uninstalled libtool libraries, other files are standard or library +-object files. +- +-If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +-only library objects (\`.lo' files) may be specified, and \`-rpath' is +-required, except when creating a convenience library. +- +-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +-using \`ar' and \`ranlib', or on Windows using \`lib'. +- +-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +-is created, otherwise an executable program is created." +- ;; +- +-uninstall) +- $echo \ +-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - +-Remove libraries from an installation directory. +- +-RM is the name of the program to use to delete files associated with each FILE +-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +-to RM. ++exit $exit_status + +-If FILE is a libtool library, all the files associated with it are deleted. +-Otherwise, only FILE itself is deleted using RM." +- ;; - +-*) +- $echo "$modename: invalid operation mode \`$mode'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +-esac - +-$echo +-$echo "Try \`$modename --help' for more information about other modes." - +-exit $EXIT_SUCCESS -+# Checks for typedefs, structures, and compiler characteristics. -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat file-mode macros are broken" >&5 -+$as_echo_n "checking whether stat file-mode macros are broken... " >&6; } -+if test "${ac_cv_header_stat_broken+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include -+#include - -+#if defined S_ISBLK && defined S_IFDIR -+extern char c1[S_ISBLK (S_IFDIR) ? -1 : 1]; -+#endif - -+#if defined S_ISBLK && defined S_IFCHR -+extern char c2[S_ISBLK (S_IFCHR) ? -1 : 1]; -+#endif - -+#if defined S_ISLNK && defined S_IFREG -+extern char c3[S_ISLNK (S_IFREG) ? -1 : 1]; -+#endif - -+#if defined S_ISSOCK && defined S_IFREG -+extern char c4[S_ISSOCK (S_IFREG) ? -1 : 1]; -+#endif - -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_header_stat_broken=no -+else -+ ac_cv_header_stat_broken=yes -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stat_broken" >&5 -+$as_echo "$ac_cv_header_stat_broken" >&6; } -+if test $ac_cv_header_stat_broken = yes; then + # The TAGs below are defined such that we never get into a situation + # in which we disable both kinds of libraries. Given conflicting +@@ -6416,10 +8402,12 @@ build_old_libs=yes + # ### END LIBTOOL TAG CONFIG: disable-shared -+$as_echo "#define STAT_MACROS_BROKEN 1" >>confdefs.h + # ### BEGIN LIBTOOL TAG CONFIG: disable-static +-build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac` ++build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` + # ### END LIBTOOL TAG CONFIG: disable-static -+fi + # Local Variables: + # mode:shell-script + # sh-indentation:2 + # End: ++# vi:sw=2 ++ +--- raidutils-0.0.6.orig/configure ++++ raidutils-0.0.6/configure +@@ -1,81 +1,415 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.59 for I2O RAID Utilities 0.0.6. ++# Generated by GNU Autoconf 2.67 for I2O RAID Utilities 0.0.6. ++# ++# ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software ++# Foundation, Inc. ++# + # +-# Copyright (C) 2003 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. +-## --------------------- ## +-## M4sh Initialization. ## +-## --------------------- ## ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99" >&5 -+$as_echo_n "checking for stdbool.h that conforms to C99... " >&6; } -+if test "${ac_cv_header_stdbool_h+set}" = set; then : -+ $as_echo_n "(cached) " >&6 +-# Be Bourne compatible +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST +else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ - -+#include -+#ifndef bool -+ "error: bool is not defined" -+#endif -+#ifndef false -+ "error: false is not defined" -+#endif -+#if false -+ "error: false is not 0" -+#endif -+#ifndef true -+ "error: true is not defined" -+#endif -+#if true != 1 -+ "error: true is not 1" -+#endif -+#ifndef __bool_true_false_are_defined -+ "error: __bool_true_false_are_defined is not defined" -+#endif - -+ struct s { _Bool s: 1; _Bool t; } s; - -+ char a[true == 1 ? 1 : -1]; -+ char b[false == 0 ? 1 : -1]; -+ char c[__bool_true_false_are_defined == 1 ? 1 : -1]; -+ char d[(bool) 0.5 == true ? 1 : -1]; -+ bool e = &s; -+ char f[(_Bool) 0.0 == false ? 1 : -1]; -+ char g[true]; -+ char h[sizeof (_Bool)]; -+ char i[sizeof s.t]; -+ enum { j = false, k = true, l = false * true, m = true * 256 }; -+ /* The following fails for -+ HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */ -+ _Bool n[m]; -+ char o[sizeof n == m * sizeof n[0] ? 1 : -1]; -+ char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1]; -+# if defined __xlc__ || defined __GNUC__ -+ /* Catch a bug in IBM AIX xlc compiler version 6.0.0.0 -+ reported by James Lemley on 2005-10-05; see -+ http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html -+ This test is not quite right, since xlc is allowed to -+ reject this program, as the initializer for xlcbug is -+ not one of the forms that C requires support for. -+ However, doing the test right would require a runtime -+ test, and that would make cross-compilation harder. -+ Let us hope that IBM fixes the xlc bug, and also adds -+ support for this kind of constant expression. In the -+ meantime, this test will reject xlc, which is OK, since -+ our stdbool.h substitute should suffice. We also test -+ this with GCC, where it should work, to detect more -+ quickly whether someone messes up the test in the -+ future. */ -+ char digs[] = "0123456789"; -+ int xlcbug = 1 / (&(digs + 5)[-2 + (bool) 1] == &digs[4] ? 1 : -1); -+# endif -+ /* Catch a bug in an HP-UX C compiler. See -+ http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html -+ http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html -+ */ -+ _Bool q = true; -+ _Bool *pq = &q; - -+int -+main () -+{ - -+ *pq |= q; -+ *pq |= ! q; -+ /* Refer to every declared value, to avoid compiler optimizations. */ -+ return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l -+ + !m + !n + !o + !p + !q + !pq); ++ case `(set -o) 2>/dev/null` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; ++esac + fi +-DUALCASE=1; export DUALCASE # for MKS sh -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_header_stdbool_h=yes +-# Support unset when possible. +-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +- as_unset=unset +-else +- as_unset=false ++ ++as_nl=' ++' ++export as_nl ++# Printing a long string crashes Solaris 7 /usr/bin/printf. ++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo ++# Prefer a ksh shell builtin over an external printf program on Solaris, ++# but without wasting forks for bash or zsh. ++if test -z "$BASH_VERSION$ZSH_VERSION" \ ++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='print -r --' ++ as_echo_n='print -rn --' ++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='printf %s\n' ++ as_echo_n='printf %s' +else -+ ac_cv_header_stdbool_h=no -+fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5 -+$as_echo "$ac_cv_header_stdbool_h" >&6; } -+ac_fn_c_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default" -+if test "x$ac_cv_type__Bool" = x""yes; then : - --# Checks for libraries. -+cat >>confdefs.h <<_ACEOF -+#define HAVE__BOOL 1 -+_ACEOF - --# Checks for header files. - -+fi - -+if test $ac_cv_header_stdbool_h = yes; then - -+$as_echo "#define HAVE_STDBOOL_H 1" >>confdefs.h ++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then ++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ++ as_echo_n='/usr/ucb/echo -n' ++ else ++ as_echo_body='eval expr "X$1" : "X\$.*\$"' ++ as_echo_n_body='eval ++ arg=$1; ++ case $arg in #( ++ *"$as_nl"*) ++ expr "X$arg" : "X\$.*\$$as_nl"; ++ arg=`expr "X$arg" : ".*$as_nl\$.*\$"`;; ++ esac; ++ expr "X$arg" : "X\$.*\$" | tr -d "$as_nl" ++ ' ++ export as_echo_n_body ++ as_echo_n='sh -c $as_echo_n_body as_echo' ++ fi ++ export as_echo_body ++ as_echo='sh -c $as_echo_body as_echo' + fi ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } +fi - --ac_header_dirent=no --for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do -- as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` --echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5 --echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 -+$as_echo_n "checking for an ANSI C-conforming const... " >&6; } -+if test "${ac_cv_c_const+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --#include --#include <$ac_hdr> - - int - main () - { --if ((DIR *) 0) --return 0; -+/* FIXME: Include the comments suggested by Paul. */ -+#ifndef __cplusplus -+ /* Ultrix mips cc rejects this. */ -+ typedef int charset[2]; -+ const charset cs; -+ /* SunOS 4.1.1 cc rejects this. */ -+ char const *const *pcpcc; -+ char **ppc; -+ /* NEC SVR4.0.2 mips cc rejects this. */ -+ struct point {int x, y;}; -+ static struct point const zero = {0,0}; -+ /* AIX XL C 1.02.0.0 rejects this. -+ It does not let you subtract one const X* pointer from another in -+ an arm of an if-expression whose if-part is not a constant -+ expression */ -+ const char *g = "string"; -+ pcpcc = &g + (g ? g-g : 0); -+ /* HPUX 7.0 cc rejects these. */ -+ ++pcpcc; -+ ppc = (char**) pcpcc; -+ pcpcc = (char const *const *) ppc; -+ { /* SCO 3.2v4 cc rejects this. */ -+ char *t; -+ char const *s = 0 ? (char *) 0 : (char const *) 0; + -+ *t++ = 0; -+ if (s) return 0; -+ } -+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ -+ int x[] = {25, 17}; -+ const int *foo = &x[0]; -+ ++foo; -+ } -+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ -+ typedef const int *iptr; -+ iptr p = 0; -+ ++p; -+ } -+ { /* AIX XL C 1.02.0.0 rejects this saying -+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ -+ struct s { int j; const int *ap[3]; }; -+ struct s *b; b->j = 5; -+ } -+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ -+ const int foo = 10; -+ if (!foo) return 0; -+ } -+ return !cs[0] && !zero.x; -+#endif + - ; - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- eval "$as_ac_Header=yes" -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_c_const=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --eval "$as_ac_Header=no" -+ ac_cv_c_const=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 --if test `eval echo '${'$as_ac_Header'}'` = yes; then -- cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 --_ACEOF -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 -+$as_echo "$ac_cv_c_const" >&6; } -+if test $ac_cv_c_const = no; then ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++IFS=" "" $as_nl" + -+$as_echo "#define const /**/" >>confdefs.h - --ac_header_dirent=$ac_hdr; break - fi - --done --# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. --if test $ac_header_dirent = dirent.h; then -- echo "$as_me:$LINENO: checking for library containing opendir" >&5 --echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 --if test "${ac_cv_search_opendir+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 -+$as_echo_n "checking for inline... " >&6; } -+if test "${ac_cv_c_inline+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- ac_func_search_save_LIBS=$LIBS --ac_cv_search_opendir=no --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ ac_cv_c_inline=no -+for ac_kw in inline __inline__ __inline; do -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ -+#ifndef __cplusplus -+typedef int foo_t; -+static $ac_kw foo_t static_foo () {return 0; } -+$ac_kw foo_t foo () {return 0; } -+#endif ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in #(( ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done ++IFS=$as_save_IFS --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" -+_ACEOF -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_c_inline=$ac_kw +-# Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 +fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+ test "$ac_cv_c_inline" != no && break -+done -+ ++if test ! -f "$as_myself"; then ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ exit 1 +fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 -+$as_echo "$ac_cv_c_inline" >&6; } -+ -+case $ac_cv_c_inline in -+ inline | yes) ;; -+ *) -+ case $ac_cv_c_inline in -+ no) ac_val=;; -+ *) ac_val=$ac_cv_c_inline;; -+ esac -+ cat >>confdefs.h <<_ACEOF -+#ifndef __cplusplus -+#define inline $ac_val - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char opendir (); --int --main () --{ --opendir (); -- ; -- return 0; --} - _ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_search_opendir="none required" -+ ;; -+esac -+ -+ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default" -+if test "x$ac_cv_type_pid_t" = x""yes; then : -+ - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 + -+cat >>confdefs.h <<_ACEOF -+#define pid_t int -+_ACEOF ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : ++done + PS1='$ ' + PS2='> ' + PS4='+ ' - fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --if test "$ac_cv_search_opendir" = no; then -- for ac_lib in dir; do -- LIBS="-l$ac_lib $ac_func_search_save_LIBS" -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ + # NLS nuisances. +-for as_var in \ +- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ +- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ +- LC_TELEPHONE LC_TIME ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE + -+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" -+if test "x$ac_cv_type_size_t" = x""yes; then : ++# CDPATH. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + ++if test "x$CONFIG_SHELL" = x; then ++ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '\${1+\"\$@\"}'='\"\$@\"' ++ setopt NO_GLOB_SUBST +else ++ case \`(set -o) 2>/dev/null\` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; ++esac ++fi ++" ++ as_required="as_fn_return () { (exit \$1); } ++as_fn_success () { as_fn_return 0; } ++as_fn_failure () { as_fn_return 1; } ++as_fn_ret_success () { return 0; } ++as_fn_ret_failure () { return 1; } + -+cat >>confdefs.h <<_ACEOF -+#define size_t unsigned int - _ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF ++exitcode=0 ++as_fn_success || { exitcode=1; echo as_fn_success failed.; } ++as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } ++as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } ++as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } ++if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + ++else ++ exitcode=1; echo positional parameters were not saved. ++fi ++test x\$exitcode = x0 || exit 1" ++ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO ++ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO ++ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && ++ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 ++test \$(( 1 + 1 )) = 2 || exit 1" ++ if (eval "$as_required") 2>/dev/null; then : ++ as_have_required=yes ++else ++ as_have_required=no +fi ++ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 -+$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } -+if test "${ac_cv_header_time+set}" = set; then : -+ $as_echo_n "(cached) " >&6 +else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ -+#include -+#include -+#include - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char opendir (); - int - main () - { --opendir (); -+if ((struct tm *) 0) -+return 0; - ; - return 0; - } - _ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_search_opendir="-l$ac_lib" --break -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_header_time=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext -- done -+ ac_cv_header_time=no - fi --LIBS=$ac_func_search_save_LIBS -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 --echo "${ECHO_T}$ac_cv_search_opendir" >&6 --if test "$ac_cv_search_opendir" != no; then -- test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 -+$as_echo "$ac_cv_header_time" >&6; } -+if test $ac_cv_header_time = yes; then ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++as_found=false ++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do +- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then +- eval $as_var=C; export $as_var +- else +- $as_unset $as_var +- fi ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ as_found=: ++ case $as_dir in #( ++ /*) ++ for as_base in sh bash ksh sh5; do ++ # Try only shells that exist, to save several forks. ++ as_shell=$as_dir/$as_base ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ CONFIG_SHELL=$as_shell as_have_required=yes ++ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : ++ break 2 ++fi ++fi ++ done;; ++ esac ++ as_found=false + done ++$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && ++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : ++ CONFIG_SHELL=$SHELL as_have_required=yes ++fi; } ++IFS=$as_save_IFS + -+$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h - - fi - -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 -+$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } -+if test "${ac_cv_struct_tm+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- echo "$as_me:$LINENO: checking for library containing opendir" >&5 --echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 --if test "${ac_cv_search_opendir+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_func_search_save_LIBS=$LIBS --ac_cv_search_opendir=no --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ -- --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char opendir (); -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+#include -+#include + - int - main () - { --opendir (); -+struct tm tm; -+ int *p = &tm.tm_sec; -+ return !p; - ; - return 0; - } - _ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_search_opendir="none required" -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_struct_tm=time.h - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ ac_cv_struct_tm=sys/time.h ++ if test "x$CONFIG_SHELL" != x; then : ++ # We cannot yet assume a decent shell, so we have to provide a ++ # neutralization value for shells without unset; and this also ++ # works around shells that cannot unset nonexistent variables. ++ BASH_ENV=/dev/null ++ ENV=/dev/null ++ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++ if test x$as_have_required = xno; then : ++ $as_echo "$0: This script requires a shell more modern than all" ++ $as_echo "$0: the shells that I found on your system." ++ if test x${ZSH_VERSION+set} = xset ; then ++ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" ++ $as_echo "$0: be upgraded to zsh 4.3.4 or later." ++ else ++ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, ++$0: including any error possibly output before this ++$0: message. Then install a modern shell, or manually run ++$0: the script under such a shell if you do have one." ++ fi ++ exit 1 +fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 -+$as_echo "$ac_cv_struct_tm" >&6; } -+if test $ac_cv_struct_tm = sys/time.h; then ++fi ++fi ++SHELL=${CONFIG_SHELL-/bin/sh} ++export SHELL ++# Unset more variables known to interfere with behavior of common tools. ++CLICOLOR_FORCE= GREP_OPTIONS= ++unset CLICOLOR_FORCE GREP_OPTIONS + -+$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h - - fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --if test "$ac_cv_search_opendir" = no; then -- for ac_lib in x; do -- LIBS="-l$ac_lib $ac_func_search_save_LIBS" -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF ++## --------------------- ## ++## M4sh Shell Functions. ## ++## --------------------- ## ++# as_fn_unset VAR ++# --------------- ++# Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} ++} ++as_unset=as_fn_unset + -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working volatile" >&5 -+$as_echo_n "checking for working volatile... " >&6; } -+if test "${ac_cv_c_volatile+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char opendir (); - int - main () - { --opendir (); ++# as_fn_set_status STATUS ++# ----------------------- ++# Set $? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} # as_fn_set_status + -+volatile int x; -+int * volatile y = (int *) 0; -+return !x && !y; - ; - return 0; - } - _ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_search_opendir="-l$ac_lib" --break -+if ac_fn_c_try_compile "$LINENO"; then : -+ ac_cv_c_volatile=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext -- done -+ ac_cv_c_volatile=no - fi --LIBS=$ac_func_search_save_LIBS -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 --echo "${ECHO_T}$ac_cv_search_opendir" >&6 --if test "$ac_cv_search_opendir" != no; then -- test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_volatile" >&5 -+$as_echo "$ac_cv_c_volatile" >&6; } -+if test $ac_cv_c_volatile = no; then - --fi -+$as_echo "#define volatile /**/" >>confdefs.h - - fi - --echo "$as_me:$LINENO: checking for ANSI C header files" >&5 --echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 --if test "${ac_cv_header_stdc+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 ++# as_fn_exit STATUS ++# ----------------- ++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} # as_fn_exit + -+# Checks for library functions. -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether closedir returns void" >&5 -+$as_echo_n "checking whether closedir returns void... " >&6; } -+if test "${ac_cv_func_closedir_void+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ if test "$cross_compiling" = yes; then : -+ ac_cv_func_closedir_void=yes -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --#include --#include --#include --#include -+$ac_includes_default -+#include <$ac_header_dirent> -+#ifndef __cplusplus -+int closedir (); -+#endif - - int - main () - { -- -+return closedir (opendir (".")) != 0; - ; - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_header_stdc=yes -+if ac_fn_c_try_run "$LINENO"; then : -+ ac_cv_func_closedir_void=no - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ ac_cv_func_closedir_void=yes -+fi -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ -+ conftest.$ac_objext conftest.beam conftest.$ac_ext -+fi - --ac_cv_header_stdc=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_closedir_void" >&5 -+$as_echo "$ac_cv_func_closedir_void" >&6; } -+if test $ac_cv_func_closedir_void = yes; then - --if test $ac_cv_header_stdc = yes; then -- # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include -+$as_echo "#define CLOSEDIR_VOID 1" >>confdefs.h - --_ACEOF --if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -- $EGREP "memchr" >/dev/null 2>&1; then -- : --else -- ac_cv_header_stdc=no - fi --rm -f conftest* ++# as_fn_mkdir_p ++# ------------- ++# Create "$as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () ++{ + -+for ac_header in vfork.h -+do : -+ ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default" -+if test "x$ac_cv_header_vfork_h" = x""yes; then : -+ cat >>confdefs.h <<_ACEOF -+#define HAVE_VFORK_H 1 -+_ACEOF - - fi - --if test $ac_cv_header_stdc = yes; then -- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include -+done - -+for ac_func in fork vfork -+do : -+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -+if eval test \"x\$"$as_ac_var"\" = x"yes"; then : -+ cat >>confdefs.h <<_ACEOF -+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 - _ACEOF --if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -- $EGREP "free" >/dev/null 2>&1; then -- : --else -- ac_cv_header_stdc=no --fi --rm -f conftest* - - fi -+done ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X$//$[^/]' \| \ ++ X"$as_dir" : 'X$//$$' \| \ ++ X"$as_dir" : 'X$/$' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/$.*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" ++ ++ ++} # as_fn_mkdir_p ++# as_fn_append VAR VALUE ++# ---------------------- ++# Append the text in VALUE to the end of the definition contained in VAR. Take ++# advantage of any shell optimizations that allow amortized linear growth over ++# repeated appends, instead of the typical quadratic growth present in naive ++# implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' ++else ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append --if test $ac_cv_header_stdc = yes; then -- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -- if test "$cross_compiling" = yes; then -- : -+if test "x$ac_cv_func_fork" = xyes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5 -+$as_echo_n "checking for working fork... " >&6; } -+if test "${ac_cv_func_fork_works+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ if test "$cross_compiling" = yes; then : -+ ac_cv_func_fork_works=cross +-# Required to use basename. +-if expr a : '$a$' >/dev/null 2>&1; then ++# as_fn_arith ARG... ++# ------------------ ++# Perform arithmetic evaluation on the ARGs, and store the result in the ++# global $as_val. Take advantage of shells that can avoid forks. The arguments ++# must be portable across $(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' +else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --#include --#if ((' ' & 0x0FF) == 0x020) --# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') --# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) --#else --# define ISLOWER(c) \ -- (('a' <= (c) && (c) <= 'i') \ -- || ('j' <= (c) && (c) <= 'r') \ -- || ('s' <= (c) && (c) <= 'z')) --# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) --#endif -- --#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -+$ac_includes_default - int - main () - { -- int i; -- for (i = 0; i < 256; i++) -- if (XOR (islower (i), ISLOWER (i)) -- || toupper (i) != TOUPPER (i)) -- exit(2); -- exit (0); ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith + -+ /* By Ruediger Kuhlmann. */ -+ return fork () < 0; + -+ ; -+ return 0; - } - _ACEOF --rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- : -+if ac_fn_c_try_run "$LINENO"; then : -+ ac_cv_func_fork_works=yes ++# as_fn_error STATUS ERROR [LINENO LOG_FD] ++# ---------------------------------------- ++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++# script with STATUS, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 ++ fi ++ $as_echo "$as_me: error: $2" >&2 ++ as_fn_exit $as_status ++} # as_fn_error ++ ++if expr a : '$a$' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*$...$'`" = X001; then + as_expr=expr else -- echo "$as_me: program exited with status $ac_status" >&5 --echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --( exit $ac_status ) --ac_cv_header_stdc=no --fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -+ ac_cv_func_fork_works=no - fi -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ -+ conftest.$ac_objext conftest.beam conftest.$ac_ext + as_expr=false fi --fi --echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 --echo "${ECHO_T}$ac_cv_header_stdc" >&6 --if test $ac_cv_header_stdc = yes; then -- --cat >>confdefs.h <<\_ACEOF --#define STDC_HEADERS 1 --_ACEOF +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5 -+$as_echo "$ac_cv_func_fork_works" >&6; } --echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5 --echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6 --if test "${ac_cv_header_sys_wait_h+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ ac_cv_func_fork_works=$ac_cv_func_fork -+fi -+if test "x$ac_cv_func_fork_works" = xcross; then -+ case $host in -+ *-*-amigaos* | *-*-msdosdjgpp*) -+ # Override, as these systems have only a dummy fork() stub -+ ac_cv_func_fork_works=no -+ ;; -+ *) -+ ac_cv_func_fork_works=yes -+ ;; -+ esac -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 -+$as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} -+fi -+ac_cv_func_vfork_works=$ac_cv_func_vfork -+if test "x$ac_cv_func_vfork" = xyes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5 -+$as_echo_n "checking for working vfork... " >&6; } -+if test "${ac_cv_func_vfork_works+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ if test "$cross_compiling" = yes; then : -+ ac_cv_func_vfork_works=cross ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname +else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --#include -+/* Thanks to Paul Eggert for this test. */ -+$ac_includes_default - #include --#ifndef WEXITSTATUS --# define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8) -+#ifdef HAVE_VFORK_H -+# include - #endif --#ifndef WIFEXITED --# define WIFEXITED(stat_val) (((stat_val) & 255) == 0) -+/* On some sparc systems, changes by the child to local and incoming -+ argument registers are propagated back to the parent. The compiler -+ is told about this with #include , but some compilers -+ (e.g. gcc -O) don't grok . Test for this by using a -+ static variable whose address is put into a register that is -+ clobbered by the vfork. */ -+static void -+#ifdef __cplusplus -+sparc_address_test (int arg) -+# else -+sparc_address_test (arg) int arg; - #endif -+{ -+ static pid_t child; -+ if (!child) { -+ child = vfork (); -+ if (child < 0) { -+ perror ("vfork"); -+ _exit(2); -+ } -+ if (!child) { -+ arg = getpid(); -+ write(-1, "", 0); -+ _exit (arg); -+ } -+ } -+} - - int - main () - { -- int s; -- wait (&s); -- s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_header_sys_wait_h=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ pid_t parent = getpid (); -+ pid_t child; ++ as_dirname=false ++fi --ac_cv_header_sys_wait_h=no --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 --echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 --if test $ac_cv_header_sys_wait_h = yes; then -+ sparc_address_test (0); +-# Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \ + X"$0" : 'X$//$$' \| \ +- X"$0" : 'X$/$$' \| \ +- . : '$.$' 2>/dev/null || +-echo X/"$0" | +- sed '/^.*\/$[^/][^/]*$\/*$/{ s//\1/; q; } +- /^X\/$\/\/$$/{ s//\1/; q; } +- /^X\/$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` +- ++ X"$0" : 'X$/$' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/$[^/][^/]*$\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/$\/\/$$/{ ++ s//\1/ ++ q ++ } ++ /^X\/$\/$.*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` --cat >>confdefs.h <<\_ACEOF --#define HAVE_SYS_WAIT_H 1 --_ACEOF -+ child = vfork (); +-# PATH needs CR, and LINENO needs CR and PATH. + # Avoid depending upon Character Ranges. + as_cr_letters='abcdefghijklmnopqrstuvwxyz' + as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +@@ -83,146 +417,107 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE + as_cr_digits='0123456789' + as_cr_alnum=$as_cr_Letters$as_cr_digits +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh -fi -+ if (child == 0) { -+ /* Here is another test for sparc vfork register problems. This -+ test uses lots of local variables, at least as many local -+ variables as main has allocated so far including compiler -+ temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris -+ 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should -+ reuse the register of parent for one of the local variables, -+ since it will think that parent can't possibly be used any more -+ in this routine. Assigning to the local variable will thus -+ munge parent in the parent process. */ -+ pid_t -+ p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), -+ p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); -+ /* Convince the compiler that p..p7 are live; otherwise, it might -+ use the same hardware register for all 8 local variables. */ -+ if (p != p1 || p != p2 || p != p3 || p != p4 -+ || p != p5 || p != p6 || p != p7) -+ _exit(1); -+ -+ /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent -+ from child file descriptors. If the child closes a descriptor -+ before it execs or exits, this munges the parent's descriptor -+ as well. Test for this by closing stdout in the child. */ -+ _exit(close(fileno(stdout)) != 0); -+ } else { -+ int status; -+ struct stat st; +- +- +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done +- +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in +- /*) +- if ("$as_dir/$as_base" -c ' +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac -+ while (wait(&status) != child) -+ ; -+ return ( -+ /* Was there some problem with vforking? */ -+ child < 0 +- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO +- # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. +- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ as_lineno_1=$LINENO as_lineno_1a=$LINENO ++ as_lineno_2=$LINENO as_lineno_2a=$LINENO ++ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && ++ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { ++ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^$['$as_cr_digits']*$$.*$[$]LINENO$[^'$as_cr_alnum'_]$,\1\2\1\3, ++ :loop ++ s/[$]LINENO$[^'$as_cr_alnum'_].*\n$$.*$/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || +- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 +- { (exit 1); exit 1; }; } ++ chmod +x "$as_me.lineno" || ++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } -+ /* Did the child fail? (This shouldn't happen.) */ -+ || status + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } -+ /* Did the vfork/compiler bug occur? */ -+ || parent != getpid() +- +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in #((((( ++-n*) ++ case `echo 'xy\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac -+ /* Did the file descriptor bug occur? */ -+ || fstat(fileno(stdout), &st) != 0 -+ ); -+ } -+} -+_ACEOF -+if ac_fn_c_try_run "$LINENO"; then : -+ ac_cv_func_vfork_works=yes -+else -+ ac_cv_func_vfork_works=no -+fi -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ -+ conftest.$ac_objext conftest.beam conftest.$ac_ext -+fi +-if expr a : '$a$' >/dev/null 2>&1; then +- as_expr=expr ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file + else +- as_expr=false ++ rm -f conf$$.dir ++ mkdir conf$$.dir 2>/dev/null + fi +- +-rm -f conf$$ conf$$.exe conf$$.file +-echo >conf$$.file +-if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links +- as_ln_s='cp -p' +- else ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++ else ++ as_ln_s='cp -p' + fi +-elif ln conf$$.file conf$$ 2>/dev/null; then +- as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5 -+$as_echo "$ac_cv_func_vfork_works" >&6; } + if mkdir -p . 2>/dev/null; then +- as_mkdir_p=: ++ as_mkdir_p='mkdir -p "$as_dir"' + else + test -d ./-p && rmdir ./-p + as_mkdir_p=false + fi -+fi; -+if test "x$ac_cv_func_fork_works" = xcross; then -+ ac_cv_func_vfork_works=$ac_cv_func_vfork -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 -+$as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} +-as_executable_p="test -f" ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in #( ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' +fi ++as_executable_p=$as_test_x -+if test "x$ac_cv_func_vfork_works" = xyes; then - -+$as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -231,36 +526,26 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+else -+$as_echo "#define vfork fork" >>confdefs.h +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- +- -+fi -+if test "x$ac_cv_func_fork_works" = xyes; then + # Check that we are running under the correct shell. + SHELL=${CONFIG_SHELL-/bin/sh} -+$as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h +-case X$ECHO in ++case X$lt_ECHO in + X*--fallback-echo) + # Remove one level of quotation (which was required for Make). +- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` ++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; + esac --for ac_header in fcntl.h malloc.h memory.h stdlib.h string.h strings.h sys/file.h sys/ioctl.h sys/systeminfo.h unistd.h values.h inttypes.h --do --as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 - fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+ -+if test $ac_cv_c_compiler_gnu = yes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5 -+$as_echo_n "checking whether $CC needs -traditional... " >&6; } -+if test "${ac_cv_prog_gcc_traditional+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- # Is the header compilable? --echo "$as_me:$LINENO: checking $ac_header usability" >&5 --echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ ac_pattern="Autoconf.*'x'" -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --$ac_includes_default --#include <$ac_header> -+#include -+Autoconf TIOCGETP - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_header_compiler=yes -+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -+ $EGREP "$ac_pattern" >/dev/null 2>&1; then : -+ ac_cv_prog_gcc_traditional=yes +-echo=${ECHO-echo} ++ECHO=${lt_ECHO-echo} + if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then +- # Yippee, $echo works! ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $ECHO works! + : else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --ac_header_compiler=no -+ ac_cv_prog_gcc_traditional=no + # Restart under the correct shell. +@@ -270,153 +555,145 @@ fi + if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift +- cat <&5 --echo "${ECHO_T}$ac_header_compiler" >&6 -+rm -f conftest* --# Is the header present? --echo "$as_me:$LINENO: checking $ac_header presence" >&5 --echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ -+ if test $ac_cv_prog_gcc_traditional = no; then -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --#include <$ac_header> -+#include -+Autoconf TCGETA - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes -+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -+ $EGREP "$ac_pattern" >/dev/null 2>&1; then : -+ ac_cv_prog_gcc_traditional=yes - fi --if test -z "$ac_cpp_err"; then -- ac_header_preproc=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+rm -f conftest* + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. +-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -- ac_header_preproc=no +-if test -z "$ECHO"; then +-if test "X${echo_test_string+set}" != Xset; then +-# find a string as large as possible, as long as the shell can cope with it +- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do +- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string="`eval $cmd`") 2>/dev/null && +- echo_test_string="`eval $cmd`" && +- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null +- then +- break +- fi +- done +-fi ++if test -z "$lt_ECHO"; then ++ if test "X${echo_test_string+set}" != Xset; then ++ # find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if { echo_test_string=`eval $cmd`; } 2>/dev/null && ++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null ++ then ++ break ++ fi ++ done + fi - fi --rm -f conftest.err conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 --echo "${ECHO_T}$ac_header_preproc" >&6 -- --# So? What about this header? --case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in -- yes:no: ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 --echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} -- ac_header_preproc=yes -- ;; -- no:yes:* ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 --echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 --echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 --echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 --echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 --echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} -- ( -- cat <<\_ASBOX --## --------------------------------------------- ## --## Report this to the I2O RAID Utilities lists. ## --## --------------------------------------------- ## --_ASBOX -- ) | -- sed "s/^/$as_me: WARNING: /" >&2 -- ;; --esac --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 + +-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- : -else -- eval "$as_ac_Header=\$ac_header_preproc" -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5 -+$as_echo "$ac_cv_prog_gcc_traditional" >&6; } -+ if test $ac_cv_prog_gcc_traditional = yes; then -+ CC="$CC -traditional" -+ fi - fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +- # The Solaris, AIX, and Digital Unix default echo programs unquote +- # backslashes. This makes it impossible to quote backslashes using +- # echo "$something" | sed 's/\\/\\\\/g' +- # +- # So, first we look for a working echo in the user's PATH. ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++ else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. + +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for dir in $PATH /usr/ucb; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$dir/echo" ++ break ++ fi ++ done + IFS="$lt_save_ifs" +- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && +- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$dir/echo" +- break +- fi +- done +- IFS="$lt_save_ifs" + +- if test "X$echo" = Xecho; then +- # We didn't find a better echo, so look for alternatives. +- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # This shell has a builtin print -r that does the trick. +- echo='print -r' +- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && +- test "X$CONFIG_SHELL" != X/bin/ksh; then +- # If we have ksh, try running configure again with it. +- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} +- export ORIGINAL_CONFIG_SHELL +- CONFIG_SHELL=/bin/ksh +- export CONFIG_SHELL +- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} +- else +- # Try using printf. +- echo='printf %s\n' +- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # Cool, printf works +- : +- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL +- export CONFIG_SHELL +- SHELL="$CONFIG_SHELL" +- export SHELL +- echo="$CONFIG_SHELL $0 --fallback-echo" +- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ if test "X$ECHO" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ ECHO='print -r' ++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} ++ else ++ # Try using printf. ++ ECHO='printf %s\n' ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$CONFIG_SHELL $0 --fallback-echo" +- else +- # maybe with a smaller string... +- prev=: ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: + +- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do +- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null +- then +- break +- fi +- prev="$cmd" +- done ++ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do ++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" ++ done +- if test "$prev" != 'sed 50q "$0"'; then +- echo_test_string=`eval $prev` +- export echo_test_string +- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} +- else +- # Oops. We lost completely, so just stick with echo. +- echo=echo +- fi ++ if test "$prev" != 'sed 50q "$0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ ECHO=echo ++ fi ++ fi + fi + fi + fi + fi -fi --if test `eval echo '${'$as_ac_Header'}'` = yes; then -+for ac_header in stdlib.h -+do : -+ ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" -+if test "x$ac_cv_header_stdlib_h" = x""yes; then : - cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -+#define HAVE_STDLIB_H 1 - _ACEOF + # Copy echo and quote the copy suitably for passing to libtool from + # the Makefile, instead of quoting the original, which is used later. +-ECHO=$echo +-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then +- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" ++lt_ECHO=$ECHO ++if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then ++ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" fi - done --ac_ext=cc --ac_cpp='$CXXCPP $CPPFLAGS' --ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -- -- -- -- -- -- -- -- -- + + +-tagnames=${tagnames+${tagnames},}CXX - --for ac_header in strstream.h sstream fstream.h fstream iostream.h iostream iomanip.h iomanip --do --as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5 -+$as_echo_n "checking for GNU libc compatible malloc... " >&6; } -+if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- # Is the header compilable? --echo "$as_me:$LINENO: checking $ac_header usability" >&5 --echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_includes_default --#include <$ac_header> --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_cxx_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_header_compiler=yes -+ if test "$cross_compiling" = yes; then : -+ ac_cv_func_malloc_0_nonnull=no - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +-tagnames=${tagnames+${tagnames},}F77 ++test -n "$DJDIR" || exec 7<&0 &1 + + # Name of the host. +-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, ++# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, + # so uname gets run too. + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +-exec 6>&1 - --ac_header_compiler=no --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 --echo "${ECHO_T}$ac_header_compiler" >&6 + # + # Initializations. + # + ac_default_prefix=/usr/local ++ac_clean_files= + ac_config_libobj_dir=. ++LIBOBJS= + cross_compiling=no + subdirs= + MFLAGS= + MAKEFLAGS= +-SHELL=${CONFIG_SHELL-/bin/sh} - --# Is the header present? --echo "$as_me:$LINENO: checking $ac_header presence" >&5 --echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --#include <$ac_header> -+#if defined STDC_HEADERS || defined HAVE_STDLIB_H -+# include -+#else -+char *malloc (); +-# Maximum number of lines to put in a shell here document. +-# This variable seems obsolete. It should probably be removed, and +-# only ac_max_sed_lines should be used. +-: ${ac_max_here_lines=38} + + # Identity of this package. + PACKAGE_NAME='I2O RAID Utilities' +@@ -424,51 +701,192 @@ PACKAGE_TARNAME='i2o-raid-utilities' + PACKAGE_VERSION='0.0.6' + PACKAGE_STRING='I2O RAID Utilities 0.0.6' + PACKAGE_BUGREPORT='' ++PACKAGE_URL='' + + ac_unique_file="config.h.in" + # Factoring default headers for most tests. + ac_includes_default="\ + #include +-#if HAVE_SYS_TYPES_H ++#ifdef HAVE_SYS_TYPES_H + # include + #endif +-#if HAVE_SYS_STAT_H ++#ifdef HAVE_SYS_STAT_H + # include + #endif +-#if STDC_HEADERS ++#ifdef STDC_HEADERS + # include + # include + #else +-# if HAVE_STDLIB_H ++# ifdef HAVE_STDLIB_H + # include + # endif + #endif +-#if HAVE_STRING_H +-# if !STDC_HEADERS && HAVE_MEMORY_H ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H + # include + # endif + # include + #endif +-#if HAVE_STRINGS_H ++#ifdef HAVE_STRINGS_H + # include + #endif +-#if HAVE_INTTYPES_H ++#ifdef HAVE_INTTYPES_H + # include +-#else +-# if HAVE_STDINT_H +-# include +-# endif + #endif +-#if HAVE_UNISTD_H ++#ifdef HAVE_STDINT_H ++# include +#endif -+ -+int -+main () -+{ -+return ! malloc (0); -+ ; -+ return 0; -+} - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_cxx_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag -- else -- ac_cpp_err= -- fi -+if ac_fn_c_try_run "$LINENO"; then : -+ ac_cv_func_malloc_0_nonnull=yes - else -- ac_cpp_err=yes -+ ac_cv_func_malloc_0_nonnull=no -+fi -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ -+ conftest.$ac_objext conftest.beam conftest.$ac_ext - fi --if test -z "$ac_cpp_err"; then -- ac_header_preproc=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 ++#ifdef HAVE_UNISTD_H + # include + #endif" -- ac_header_preproc=no - fi --rm -f conftest.err conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 --echo "${ECHO_T}$ac_header_preproc" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5 -+$as_echo "$ac_cv_func_malloc_0_nonnull" >&6; } -+if test $ac_cv_func_malloc_0_nonnull = yes; then : +-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CC CFLAGS ac_ct_CC CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBOBJS LTLIBOBJS' ++ac_subst_vars='am__EXEEXT_FALSE ++am__EXEEXT_TRUE ++LTLIBOBJS ++LIBOBJS ++CXXCPP ++OTOOL64 ++OTOOL ++LIPO ++NMEDIT ++DSYMUTIL ++lt_ECHO ++RANLIB ++AR ++OBJDUMP ++LN_S ++NM ++ac_ct_DUMPBIN ++DUMPBIN ++LD ++FGREP ++EGREP ++GREP ++SED ++host_os ++host_vendor ++host_cpu ++host ++build_os ++build_vendor ++build_cpu ++build ++LIBTOOL ++CPP ++am__fastdepCC_FALSE ++am__fastdepCC_TRUE ++CCDEPMODE ++ac_ct_CC ++CFLAGS ++CC ++am__fastdepCXX_FALSE ++am__fastdepCXX_TRUE ++CXXDEPMODE ++AMDEPBACKSLASH ++AMDEP_FALSE ++AMDEP_TRUE ++am__quote ++am__include ++DEPDIR ++OBJEXT ++EXEEXT ++ac_ct_CXX ++CPPFLAGS ++LDFLAGS ++CXXFLAGS ++CXX ++am__untar ++am__tar ++AMTAR ++am__leading_dot ++SET_MAKE ++AWK ++mkdir_p ++MKDIR_P ++INSTALL_STRIP_PROGRAM ++STRIP ++install_sh ++MAKEINFO ++AUTOHEADER ++AUTOMAKE ++AUTOCONF ++ACLOCAL ++VERSION ++PACKAGE ++CYGPATH_W ++am__isrc ++INSTALL_DATA ++INSTALL_SCRIPT ++INSTALL_PROGRAM ++target_alias ++host_alias ++build_alias ++LIBS ++ECHO_T ++ECHO_N ++ECHO_C ++DEFS ++mandir ++localedir ++libdir ++psdir ++pdfdir ++dvidir ++htmldir ++infodir ++docdir ++oldincludedir ++includedir ++localstatedir ++sharedstatedir ++sysconfdir ++datadir ++datarootdir ++libexecdir ++sbindir ++bindir ++program_transform_name ++prefix ++exec_prefix ++PACKAGE_URL ++PACKAGE_BUGREPORT ++PACKAGE_STRING ++PACKAGE_VERSION ++PACKAGE_TARNAME ++PACKAGE_NAME ++PATH_SEPARATOR ++SHELL' + ac_subst_files='' ++ac_user_opts=' ++enable_option_checking ++enable_dependency_tracking ++enable_shared ++enable_static ++with_pic ++enable_fast_install ++with_gnu_ld ++enable_libtool_lock ++' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CXX ++CXXFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++CCC ++CC ++CFLAGS ++CPP ++CXXCPP' + -+$as_echo "#define HAVE_MALLOC 1" >>confdefs.h - --# So? What about this header? --case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in -- yes:no: ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 --echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} -- ac_header_preproc=yes -- ;; -- no:yes:* ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 --echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 --echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 --echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 --echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 --echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} -- ( -- cat <<\_ASBOX --## --------------------------------------------- ## --## Report this to the I2O RAID Utilities lists. ## --## --------------------------------------------- ## --_ASBOX -- ) | -- sed "s/^/$as_me: WARNING: /" >&2 -- ;; --esac --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- eval "$as_ac_Header=\$ac_header_preproc" --fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+ $as_echo "#define HAVE_MALLOC 0" >>confdefs.h --fi --if test `eval echo '${'$as_ac_Header'}'` = yes; then -- cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 --_ACEOF -+ case " $LIBOBJS " in -+ *" malloc.$ac_objext "* ) ;; -+ *) LIBOBJS="$LIBOBJS malloc.$ac_objext" -+ ;; -+esac + # Initialize some variables set by options. + ac_init_help= + ac_init_version=false ++ac_unrecognized_opts= ++ac_unrecognized_sep= + # The variables have the same names as the options, with + # dashes changed to underlines. + cache_file=/dev/null +@@ -491,34 +909,49 @@ x_libraries=NONE + # and all the variables that are supposed to be based on exec_prefix + # by default will actually change. + # Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) + bindir='${exec_prefix}/bin' + sbindir='${exec_prefix}/sbin' + libexecdir='${exec_prefix}/libexec' +-datadir='${prefix}/share' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' + sysconfdir='${prefix}/etc' + sharedstatedir='${prefix}/com' + localstatedir='${prefix}/var' +-libdir='${exec_prefix}/lib' + includedir='${prefix}/include' + oldincludedir='/usr/include' +-infodir='${prefix}/info' +-mandir='${prefix}/man' ++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' --fi + ac_prev= ++ac_dashdash= + for ac_option + do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then +- eval "$ac_prev=\$ac_option" ++ eval $ac_prev=\$ac_option + ac_prev= + continue + fi --done -+$as_echo "#define malloc rpl_malloc" >>confdefs.h +- ac_optarg=`expr "x$ac_option" : 'x[^=]*=$.*$'` ++ case $ac_option in ++ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=$.*$'` ;; ++ *=) ac_optarg= ;; ++ *) ac_optarg=yes ;; ++ esac --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu -+fi + # Accept the important Cygnus configure options, so we can diagnose typos. +- case $ac_option in ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; --# Checks for typedefs, structures, and compiler characteristics. --echo "$as_me:$LINENO: checking whether stat file-mode macros are broken" >&5 --echo $ECHO_N "checking whether stat file-mode macros are broken... $ECHO_C" >&6 --if test "${ac_cv_header_stat_broken+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working memcmp" >&5 -+$as_echo_n "checking for working memcmp... " >&6; } -+if test "${ac_cv_func_memcmp_working+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ if test "$cross_compiling" = yes; then : -+ ac_cv_func_memcmp_working=no -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --#include --#include -- --#if defined(S_ISBLK) && defined(S_IFDIR) --# if S_ISBLK (S_IFDIR) --You lose. --# endif --#endif -- --#if defined(S_ISBLK) && defined(S_IFCHR) --# if S_ISBLK (S_IFCHR) --You lose. --# endif --#endif -+$ac_includes_default -+int -+main () -+{ + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; +@@ -540,33 +973,59 @@ do + --config-cache | -C) + cache_file=config.cache ;; --#if defined(S_ISLNK) && defined(S_IFREG) --# if S_ISLNK (S_IFREG) --You lose. --# endif --#endif -+ /* Some versions of memcmp are not 8-bit clean. */ -+ char c0 = '\100', c1 = '\200', c2 = '\201'; -+ if (memcmp(&c0, &c2, 1) >= 0 || memcmp(&c1, &c2, 1) >= 0) -+ return 1; +- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ++ -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; +- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ +- | --da=*) ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; --#if defined(S_ISSOCK) && defined(S_IFREG) --# if S_ISSOCK (S_IFREG) --You lose. --# endif --#endif -+ /* The Next x86 OpenStep bug shows up only when comparing 16 bytes -+ or more and with at least one buffer not starting on a 4-byte boundary. -+ William Lewis provided this test program. */ -+ { -+ char foo[21]; -+ char bar[21]; -+ int i; -+ for (i = 0; i < 4; i++) -+ { -+ char *a = foo + i; -+ char *b = bar + i; -+ strcpy (a, "--------01111111"); -+ strcpy (b, "--------10000000"); -+ if (memcmp (a, b, 16) >= 0) -+ return 1; -+ } -+ return 0; -+ } ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ + -disable-* | --disable-*) +- ac_feature=`expr "x$ac_option" : 'x-*disable-$.*$'` ++ ac_useropt=`expr "x$ac_option" : 'x-*disable-$.*$'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 +- { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- eval "enable_$ac_feature=no" ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid feature name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval enable_$ac_useropt=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; -+ ; -+ return 0; -+} - _ACEOF --if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -- $EGREP "You lose" >/dev/null 2>&1; then -- ac_cv_header_stat_broken=yes -+if ac_fn_c_try_run "$LINENO"; then : -+ ac_cv_func_memcmp_working=yes - else -- ac_cv_header_stat_broken=no -+ ac_cv_func_memcmp_working=no -+fi -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ -+ conftest.$ac_objext conftest.beam conftest.$ac_ext - fi --rm -f conftest* + -enable-* | --enable-*) +- ac_feature=`expr "x$ac_option" : 'x-*enable-$[^=]*$'` ++ ac_useropt=`expr "x$ac_option" : 'x-*enable-$[^=]*$'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid feature name: $ac_feature" >&2 +- { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid feature name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"enable_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; + esac +- eval "enable_$ac_feature='$ac_optarg'" ;; ++ eval enable_$ac_useropt=\$ac_optarg ;; - fi --echo "$as_me:$LINENO: result: $ac_cv_header_stat_broken" >&5 --echo "${ECHO_T}$ac_cv_header_stat_broken" >&6 --if test $ac_cv_header_stat_broken = yes; then -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_memcmp_working" >&5 -+$as_echo "$ac_cv_func_memcmp_working" >&6; } -+test $ac_cv_func_memcmp_working = no && case " $LIBOBJS " in -+ *" memcmp.$ac_objext "* ) ;; -+ *) LIBOBJS="$LIBOBJS memcmp.$ac_objext" -+ ;; -+esac + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -593,6 +1052,12 @@ do + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; --cat >>confdefs.h <<\_ACEOF --#define STAT_MACROS_BROKEN 1 ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; + -+for ac_header in stdlib.h -+do : -+ ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" -+if test "x$ac_cv_header_stdlib_h" = x""yes; then : -+ cat >>confdefs.h <<_ACEOF -+#define HAVE_STDLIB_H 1 - _ACEOF - - fi + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; +@@ -617,13 +1082,16 @@ do + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; --echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5 --echo $ECHO_N "checking for stdbool.h that conforms to C99... $ECHO_C" >&6 --if test "${ac_cv_header_stdbool_h+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+done ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; + -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible realloc" >&5 -+$as_echo_n "checking for GNU libc compatible realloc... " >&6; } -+if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ if test "$cross_compiling" = yes; then : -+ ac_cv_func_realloc_0_nonnull=no -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ -- --#include --#ifndef bool --# error bool is not defined --#endif --#ifndef false --# error false is not defined --#endif --#if false --# error false is not 0 --#endif --#ifndef true --# error true is not defined --#endif --#if true != 1 --# error true is not 1 --#endif --#ifndef __bool_true_false_are_defined --# error __bool_true_false_are_defined is not defined -+#if defined STDC_HEADERS || defined HAVE_STDLIB_H -+# include -+#else -+char *realloc (); - #endif + -localstatedir | --localstatedir | --localstatedi | --localstated \ +- | --localstate | --localstat | --localsta | --localst \ +- | --locals | --local | --loca | --loc | --lo) ++ | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ +- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ +- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; -- struct s { _Bool s: 1; _Bool t; } s; -- -- char a[true == 1 ? 1 : -1]; -- char b[false == 0 ? 1 : -1]; -- char c[__bool_true_false_are_defined == 1 ? 1 : -1]; -- char d[(bool) -0.5 == true ? 1 : -1]; -- bool e = &s; -- char f[(_Bool) -0.0 == false ? 1 : -1]; -- char g[true]; -- char h[sizeof (_Bool)]; -- char i[sizeof s.t]; -- - int - main () - { -- return !a + !b + !c + !d + !e + !f + !g + !h + !i; -+return ! realloc (0, 0); - ; - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_header_stdbool_h=yes -+if ac_fn_c_try_run "$LINENO"; then : -+ ac_cv_func_realloc_0_nonnull=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ ac_cv_func_realloc_0_nonnull=no -+fi -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ -+ conftest.$ac_objext conftest.beam conftest.$ac_ext -+fi + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) +@@ -688,6 +1156,16 @@ do + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; --ac_cv_header_stdbool_h=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_realloc_0_nonnull" >&5 -+$as_echo "$ac_cv_func_realloc_0_nonnull" >&6; } -+if test $ac_cv_func_realloc_0_nonnull = yes; then : -+ -+$as_echo "#define HAVE_REALLOC 1" >>confdefs.h -+ -+else -+ $as_echo "#define HAVE_REALLOC 0" >>confdefs.h -+ -+ case " $LIBOBJS " in -+ *" realloc.$ac_objext "* ) ;; -+ *) LIBOBJS="$LIBOBJS realloc.$ac_objext" -+ ;; -+esac -+ -+ -+$as_echo "#define realloc rpl_realloc" >>confdefs.h -+ - fi --echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5 --echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6 --echo "$as_me:$LINENO: checking for _Bool" >&5 --echo $ECHO_N "checking for _Bool... $ECHO_C" >&6 --if test "${ac_cv_type__Bool+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; + ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; + -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether lstat correctly handles trailing slash" >&5 -+$as_echo_n "checking whether lstat correctly handles trailing slash... " >&6; } -+if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then : -+ $as_echo_n "(cached) " >&6 -+else -+ rm -f conftest.sym conftest.file -+echo >conftest.file -+if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then -+ if test "$cross_compiling" = yes; then : -+ ac_cv_func_lstat_dereferences_slashed_symlink=no - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ - $ac_includes_default - int - main () - { --if ((_Bool *) 0) -- return 0; --if (sizeof (_Bool)) -- return 0; -+struct stat sbuf; -+ /* Linux will dereference the symlink and fail, as required by POSIX. -+ That is better in the sense that it means we will not -+ have to compile and use the lstat wrapper. */ -+ return lstat ("conftest.sym/", &sbuf) == 0; - ; - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_type__Bool=yes -+if ac_fn_c_try_run "$LINENO"; then : -+ ac_cv_func_lstat_dereferences_slashed_symlink=yes - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --ac_cv_type__Bool=no -+ ac_cv_func_lstat_dereferences_slashed_symlink=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ -+ conftest.$ac_objext conftest.beam conftest.$ac_ext + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; +@@ -738,26 +1216,36 @@ do + ac_init_version=: ;; + + -with-* | --with-*) +- ac_package=`expr "x$ac_option" : 'x-*with-$[^=]*$'` ++ ac_useropt=`expr "x$ac_option" : 'x-*with-$[^=]*$'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid package name: $ac_package" >&2 +- { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package| sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid package name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; + esac +- eval "with_$ac_package='$ac_optarg'" ;; ++ eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) +- ac_package=`expr "x$ac_option" : 'x-*without-$.*$'` ++ ac_useropt=`expr "x$ac_option" : 'x-*without-$.*$'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid package name: $ac_package" >&2 +- { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package | sed 's/-/_/g'` +- eval "with_$ac_package=no" ;; ++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && ++ as_fn_error $? "invalid package name: $ac_useropt" ++ ac_useropt_orig=$ac_useropt ++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` ++ case $ac_user_opts in ++ *" ++"with_$ac_useropt" ++"*) ;; ++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ++ ac_unrecognized_sep=', ';; ++ esac ++ eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. +@@ -777,26 +1265,25 @@ do + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + +- -*) { echo "$as_me: error: unrecognized option: $ac_option +-Try \`$0 --help' for more information." >&2 +- { (exit 1); exit 1; }; } ++ -*) as_fn_error $? "unrecognized option: \`$ac_option' ++Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x$[^=]*$='` + # Reject names that are not valid shell variable names. +- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && +- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 +- { (exit 1); exit 1; }; } +- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` +- eval "$ac_envvar='$ac_optarg'" ++ case $ac_envvar in #( ++ '' | [0-9]* | *[!_$as_cr_alnum]* ) ++ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; ++ esac ++ eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. +- echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && +- echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + +@@ -805,31 +1292,36 @@ done + + if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` +- { echo "$as_me: error: missing argument to $ac_option" >&2 +- { (exit 1); exit 1; }; } ++ as_fn_error $? "missing argument to $ac_option" fi --echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5 --echo "${ECHO_T}$ac_cv_type__Bool" >&6 --if test $ac_cv_type__Bool = yes; then -- --cat >>confdefs.h <<_ACEOF --#define HAVE__BOOL 1 --_ACEOF -+else -+ # If the `ln -s' command failed, then we probably don't even -+ # have an lstat function. -+ ac_cv_func_lstat_dereferences_slashed_symlink=no +-# Be sure to have absolute paths. +-for ac_var in exec_prefix prefix +-do +- eval ac_val=$`echo $ac_var` +- case $ac_val in +- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; ++if test -n "$ac_unrecognized_opts"; then ++ case $enable_option_checking in ++ no) ;; ++ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; ++ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +-done +fi -+rm -f conftest.sym conftest.file - fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 -+$as_echo "$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; } +-# Be sure to have absolute paths. +-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ +- localstatedir libdir includedir oldincludedir infodir mandir ++# Check all directory arguments for consistency. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir + do +- eval ac_val=$`echo $ac_var` ++ eval ac_val=\$$ac_var ++ # Remove trailing slashes. ++ case $ac_val in ++ */ ) ++ ac_val=`expr "X$ac_val" : 'X$.*[^/]$' \| "X$ac_val" : 'X$.*$'` ++ eval $ac_var=\$ac_val;; ++ esac ++ # Be sure to have absolute directory names. + case $ac_val in +- [\\/$]* | ?:[\\/]* ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac ++ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" + done --if test $ac_cv_header_stdbool_h = yes; then -+test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && + # There might be people who depend on the old broken behavior: `$host' +@@ -843,8 +1335,8 @@ target=$target_alias + if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe +- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. +- If a cross compiler is detected then cross compile mode will be used." >&2 ++ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. ++ If a cross compiler is detected then cross compile mode will be used" >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +@@ -856,94 +1348,72 @@ test -n "$host_alias" && ac_tool_prefix= + test "$silent" = yes && exec 6>/dev/null --cat >>confdefs.h <<\_ACEOF --#define HAVE_STDBOOL_H 1 -+cat >>confdefs.h <<_ACEOF -+#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 - _ACEOF ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ as_fn_error $? "working directory cannot be determined" ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ as_fn_error $? "pwd does not report name of working directory" + -+if test "x$ac_cv_func_lstat_dereferences_slashed_symlink" = xno; then -+ case " $LIBOBJS " in -+ *" lstat.$ac_objext "* ) ;; -+ *) LIBOBJS="$LIBOBJS lstat.$ac_objext" -+ ;; -+esac + + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes +- # Try the directory containing this script, then its parent. +- ac_confdir=`(dirname "$0") 2>/dev/null || +-$as_expr X"$0" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ +- X"$0" : 'X$//$[^/]' \| \ +- X"$0" : 'X$//$$' \| \ +- X"$0" : 'X$/$' \| \ +- . : '$.$' 2>/dev/null || +-echo X"$0" | +- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X$\/\/$[^/].*/{ s//\1/; q; } +- /^X$\/\/$$/{ s//\1/; q; } +- /^X$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$as_myself" || ++$as_expr X"$as_myself" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ ++ X"$as_myself" : 'X$//$[^/]' \| \ ++ X"$as_myself" : 'X$//$$' \| \ ++ X"$as_myself" : 'X$/$' \| . 2>/dev/null || ++$as_echo X"$as_myself" | ++ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/$.*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + srcdir=$ac_confdir +- if test ! -r $srcdir/$ac_unique_file; then ++ if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi + else + ac_srcdir_defaulted=no fi +-if test ! -r $srcdir/$ac_unique_file; then +- if test "$ac_srcdir_defaulted" = yes; then +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 +- { (exit 1); exit 1; }; } +- else +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 +- { (exit 1); exit 1; }; } +- fi +-fi +-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || +- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 +- { (exit 1); exit 1; }; } +-srcdir=`echo "$srcdir" | sed 's%$[^\\/]$[\\/]*$%\1%'` +-ac_env_build_alias_set=${build_alias+set} +-ac_env_build_alias_value=$build_alias +-ac_cv_env_build_alias_set=${build_alias+set} +-ac_cv_env_build_alias_value=$build_alias +-ac_env_host_alias_set=${host_alias+set} +-ac_env_host_alias_value=$host_alias +-ac_cv_env_host_alias_set=${host_alias+set} +-ac_cv_env_host_alias_value=$host_alias +-ac_env_target_alias_set=${target_alias+set} +-ac_env_target_alias_value=$target_alias +-ac_cv_env_target_alias_set=${target_alias+set} +-ac_cv_env_target_alias_value=$target_alias +-ac_env_CXX_set=${CXX+set} +-ac_env_CXX_value=$CXX +-ac_cv_env_CXX_set=${CXX+set} +-ac_cv_env_CXX_value=$CXX +-ac_env_CXXFLAGS_set=${CXXFLAGS+set} +-ac_env_CXXFLAGS_value=$CXXFLAGS +-ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} +-ac_cv_env_CXXFLAGS_value=$CXXFLAGS +-ac_env_LDFLAGS_set=${LDFLAGS+set} +-ac_env_LDFLAGS_value=$LDFLAGS +-ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +-ac_cv_env_LDFLAGS_value=$LDFLAGS +-ac_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_env_CPPFLAGS_value=$CPPFLAGS +-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_cv_env_CPPFLAGS_value=$CPPFLAGS +-ac_env_CC_set=${CC+set} +-ac_env_CC_value=$CC +-ac_cv_env_CC_set=${CC+set} +-ac_cv_env_CC_value=$CC +-ac_env_CFLAGS_set=${CFLAGS+set} +-ac_env_CFLAGS_value=$CFLAGS +-ac_cv_env_CFLAGS_set=${CFLAGS+set} +-ac_cv_env_CFLAGS_value=$CFLAGS +-ac_env_CPP_set=${CPP+set} +-ac_env_CPP_value=$CPP +-ac_cv_env_CPP_set=${CPP+set} +-ac_cv_env_CPP_value=$CPP +-ac_env_CXXCPP_set=${CXXCPP+set} +-ac_env_CXXCPP_value=$CXXCPP +-ac_cv_env_CXXCPP_set=${CXXCPP+set} +-ac_cv_env_CXXCPP_value=$CXXCPP +-ac_env_F77_set=${F77+set} +-ac_env_F77_value=$F77 +-ac_cv_env_F77_set=${F77+set} +-ac_cv_env_F77_value=$F77 +-ac_env_FFLAGS_set=${FFLAGS+set} +-ac_env_FFLAGS_value=$FFLAGS +-ac_cv_env_FFLAGS_set=${FFLAGS+set} +-ac_cv_env_FFLAGS_value=$FFLAGS ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" ++fi ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X$.*[^/]$' \| "X$srcdir" : 'X$.*$'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done + + # + # Report the --help message. +@@ -966,20 +1436,17 @@ Configuration: + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit +- -q, --quiet, --silent do not print \`checking...' messages ++ -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] --echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 --echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 --if test "${ac_cv_c_const+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat accepts an empty string" >&5 -+$as_echo_n "checking whether stat accepts an empty string... " >&6; } -+if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then : -+ $as_echo_n "(cached) " >&6 - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ -_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ if test "$cross_compiling" = yes; then : -+ ac_cv_func_stat_empty_string_bug=yes -+else -+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ -- -+$ac_includes_default - int - main () - { --/* FIXME: Include the comments suggested by Paul. */ --#ifndef __cplusplus -- /* Ultrix mips cc rejects this. */ -- typedef int charset[2]; -- const charset x; -- /* SunOS 4.1.1 cc rejects this. */ -- char const *const *ccp; -- char **p; -- /* NEC SVR4.0.2 mips cc rejects this. */ -- struct point {int x, y;}; -- static struct point const zero = {0,0}; -- /* AIX XL C 1.02.0.0 rejects this. -- It does not let you subtract one const X* pointer from another in -- an arm of an if-expression whose if-part is not a constant -- expression */ -- const char *g = "string"; -- ccp = &g + (g ? g-g : 0); -- /* HPUX 7.0 cc rejects these. */ -- ++ccp; -- p = (char**) ccp; -- ccp = (char const *const *) p; -- { /* SCO 3.2v4 cc rejects this. */ -- char *t; -- char const *s = 0 ? (char *) 0 : (char const *) 0; -- -- *t++ = 0; -- } -- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ -- int x[] = {25, 17}; -- const int *foo = &x[0]; -- ++foo; -- } -- { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ -- typedef const int *iptr; -- iptr p = 0; -- ++p; -- } -- { /* AIX XL C 1.02.0.0 rejects this saying -- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ -- struct s { int j; const int *ap[3]; }; -- struct s *b; b->j = 5; -- } -- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ -- const int foo = 10; -- } --#endif -- -+struct stat sbuf; -+ return stat ("", &sbuf) == 0; - ; - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_c_const=yes -+if ac_fn_c_try_run "$LINENO"; then : -+ ac_cv_func_stat_empty_string_bug=no - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_c_const=no -+ ac_cv_func_stat_empty_string_bug=yes - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ -+ conftest.$ac_objext conftest.beam conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 --echo "${ECHO_T}$ac_cv_c_const" >&6 --if test $ac_cv_c_const = no; then +- cat <<_ACEOF + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX +- [$ac_default_prefix] ++ [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX +- [PREFIX] ++ [PREFIX] --cat >>confdefs.h <<\_ACEOF --#define const -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_stat_empty_string_bug" >&5 -+$as_echo "$ac_cv_func_stat_empty_string_bug" >&6; } -+if test $ac_cv_func_stat_empty_string_bug = yes; then -+ case " $LIBOBJS " in -+ *" stat.$ac_objext "* ) ;; -+ *) LIBOBJS="$LIBOBJS stat.$ac_objext" -+ ;; -+esac -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define HAVE_STAT_EMPTY_STRING_BUG 1 + By default, \`make install' will install all the files in + \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +@@ -989,18 +1456,26 @@ for instance \`--prefix=\$HOME'. + For better control, use the options below. + + Fine tuning of the installation directories: +- --bindir=DIR user executables [EPREFIX/bin] +- --sbindir=DIR system admin executables [EPREFIX/sbin] +- --libexecdir=DIR program executables [EPREFIX/libexec] +- --datadir=DIR read-only architecture-independent data [PREFIX/share] +- --sysconfdir=DIR read-only single-machine data [PREFIX/etc] +- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] +- --localstatedir=DIR modifiable single-machine data [PREFIX/var] +- --libdir=DIR object code libraries [EPREFIX/lib] +- --includedir=DIR C header files [PREFIX/include] +- --oldincludedir=DIR C header files for non-gcc [/usr/include] +- --infodir=DIR info documentation [PREFIX/info] +- --mandir=DIR man documentation [PREFIX/man] ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root ++ [DATAROOTDIR/doc/i2o-raid-utilities] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] _ACEOF - fi + cat <<\_ACEOF +@@ -1023,14 +1498,13 @@ if test -n "$ac_init_help"; then + cat <<\_ACEOF --echo "$as_me:$LINENO: checking for inline" >&5 --echo $ECHO_N "checking for inline... $ECHO_C" >&6 --if test "${ac_cv_c_inline+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- ac_cv_c_inline=no --for ac_kw in inline __inline__ __inline; do -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ -+for ac_func in vprintf -+do : -+ ac_fn_c_check_func "$LINENO" "vprintf" "ac_cv_func_vprintf" -+if test "x$ac_cv_func_vprintf" = x""yes; then : -+ cat >>confdefs.h <<_ACEOF -+#define HAVE_VPRINTF 1 + Optional Features: ++ --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors +- --enable-shared[=PKGS] +- build shared libraries [default=yes] +- --enable-static[=PKGS] +- build static libraries [default=yes] ++ --enable-shared[=PKGS] build shared libraries [default=yes] ++ --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) +@@ -1038,144 +1512,723 @@ Optional Features: + Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) +- --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic try to use only PIC/non-PIC objects [default=use + both] +- --with-tags[=TAGS] +- include additional configurations [automatic] ++ --with-gnu-ld assume the C compiler uses GNU ld [default=no] + + Some influential environment variables: + CXX C++ compiler command + CXXFLAGS C++ compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory +- CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have +- headers in a nonstandard directory ++ LIBS libraries to pass to the linker, e.g. -l ++ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory + CC C compiler command + CFLAGS C compiler flags + CPP C preprocessor + CXXCPP C++ preprocessor +- F77 Fortran 77 compiler command +- FFLAGS Fortran 77 compiler flags + + Use these variables to override the choices made by `configure' or to help + it to find libraries and programs with nonstandard names/locations. + ++Report bugs to the package provider. _ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#ifndef __cplusplus --typedef int foo_t; --static $ac_kw foo_t static_foo () {return 0; } --$ac_kw foo_t foo () {return 0; } --#endif ++ac_status=$? + fi --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_c_inline=$ac_kw; break + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. +- ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue +- test -d $ac_dir || continue ++ test -d "$ac_dir" || ++ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || ++ continue + ac_builddir=. + +-if test "$ac_dir" != .; then +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ac_fn_c_check_func "$LINENO" "_doprnt" "ac_cv_func__doprnt" -+if test "x$ac_cv_func__doprnt" = x""yes; then : -+ -+$as_echo "#define HAVE_DOPRNT 1" >>confdefs.h +- ac_dir_suffix= ac_top_builddir= +-fi ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --done + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac +- +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix +- cd $ac_dir +- # Check for guested configure; otherwise get Cygnus style configure. +- if test -f $ac_srcdir/configure.gnu; then +- echo +- $SHELL $ac_srcdir/configure.gnu --help=recursive +- elif test -f $ac_srcdir/configure; then +- echo +- $SHELL $ac_srcdir/configure --help=recursive +- elif test -f $ac_srcdir/configure.ac || +- test -f $ac_srcdir/configure.in; then +- echo +- $ac_configure --help ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive + else +- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 +- fi +- cd $ac_popdir ++ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } + done fi --echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 --echo "${ECHO_T}$ac_cv_c_inline" >&6 -+done +-test -n "$ac_init_help" && exit 0 ++test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF + I2O RAID Utilities configure 0.0.6 +-generated by GNU Autoconf 2.59 ++generated by GNU Autoconf 2.67 --case $ac_cv_c_inline in -- inline | yes) ;; -- *) -- case $ac_cv_c_inline in -- no) ac_val=;; -- *) ac_val=$ac_cv_c_inline;; -- esac -- cat >>confdefs.h <<_ACEOF --#ifndef __cplusplus --#define inline $ac_val --#endif -+for ac_func in alarm atexit dup2 memset strchr strcspn strpbrk strrchr strspn strstr strtol strtoul sysinfo uname -+do : -+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -+if eval test \"x\$"$as_ac_var"\" = x"yes"; then : -+ cat >>confdefs.h <<_ACEOF -+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 2010 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. _ACEOF -- ;; --esac - --echo "$as_me:$LINENO: checking for pid_t" >&5 --echo $ECHO_N "checking for pid_t... $ECHO_C" >&6 --if test "${ac_cv_type_pid_t+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 +- exit 0 ++ exit + fi +-exec 5>config.log +-cat >&5 <<_ACEOF ++ ++## ------------------------ ## ++## Autoconf initialization. ## ++## ------------------------ ## ++ ++# ac_fn_cxx_try_compile LINENO ++# ---------------------------- ++# Try to compile conftest.$ac_ext, and return whether this succeeded. ++ac_fn_cxx_try_compile () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext ++ if { { ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compile") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 +fi -+done ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ as_fn_set_status $ac_retval + ++} # ac_fn_cxx_try_compile + -+if test "x$CC" != xcc; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5 -+$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF -+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5 -+$as_echo_n "checking whether cc understands -c and -o together... " >&6; } ++# ac_fn_c_try_compile LINENO ++# -------------------------- ++# Try to compile conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_compile () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext ++ if { { ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compile") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 +fi -+set dummy $CC; ac_cc=`$as_echo "$2" | -+ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` -+if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\"" = set; then : ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_compile ++ ++# ac_fn_c_try_cpp LINENO ++# ---------------------- ++# Try to preprocess conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_cpp () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if { { ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } > conftest.i && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_cpp ++ ++# ac_fn_c_try_link LINENO ++# ----------------------- ++# Try to link conftest.$ac_ext, and return whether this succeeded. ++ac_fn_c_try_link () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext conftest$ac_exeext ++ if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && { ++ test "$cross_compiling" = yes || ++ $as_test_x conftest$ac_exeext ++ }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information ++ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would ++ # interfere with the next link command; also delete a directory that is ++ # left behind by Apple's compiler. We do this before executing the actions. ++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_link ++ ++# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES ++# ------------------------------------------------------- ++# Tests whether HEADER exists and can be compiled using the include files in ++# INCLUDES, setting the cache variable VAR accordingly. ++ac_fn_c_check_header_compile () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval "test \"\${$3+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext - /* end confdefs.h. */ --$ac_includes_default ++/* end confdefs.h. */ ++$4 ++#include <$2> ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ eval "$3=yes" ++else ++ eval "$3=no" ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + - int - main () - { --if ((pid_t *) 0) -- return 0; --if (sizeof (pid_t)) -- return 0; ++} # ac_fn_c_check_header_compile + - ; - return 0; - } - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+# Make sure it works both with $CC and with simple cc. -+# We do the test twice because some compilers refuse to overwrite an -+# existing .o file with -o, though they will create one. -+ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' -+rm -f conftest2.* -+if { { case "(($ac_try" in ++# ac_fn_c_try_run LINENO ++# ---------------------- ++# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes ++# that executables *can* be run. ++ac_fn_c_try_run () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if { { ac_try="$ac_link" ++case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_try") 2>&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } && -+ test -f conftest2.$ac_objext && { { case "(($ac_try" in ++ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' ++ { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 - ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_type_pid_t=yes ++ ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; -+then -+ eval ac_cv_prog_cc_${ac_cc}_c_o=yes -+ if test "x$CC" != xcc; then -+ # Test first that cc exists at all. -+ if { ac_try='cc -c conftest.$ac_ext >&5' -+ { { case "(($ac_try" in ++ test $ac_status = 0; }; }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: program exited with status $ac_status" >&5 ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=$ac_status ++fi ++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_c_try_run ++ ++# ac_fn_c_check_func LINENO FUNC VAR ++# ---------------------------------- ++# Tests whether FUNC exists, setting the cache variable VAR accordingly ++ac_fn_c_check_func () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval "test \"\${$3+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++/* Define $2 to an innocuous variant, in case declares $2. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $2 innocuous_$2 ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $2 (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef $2 ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $2 (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$2 || defined __stub___$2 ++choke me ++#endif ++ ++int ++main () ++{ ++return $2 (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ eval "$3=yes" ++else ++ eval "$3=no" ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ ++} # ac_fn_c_check_func ++ ++# ac_fn_cxx_try_cpp LINENO ++# ------------------------ ++# Try to preprocess conftest.$ac_ext, and return whether this succeeded. ++ac_fn_cxx_try_cpp () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if { { ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_try") 2>&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; }; then -+ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' -+ rm -f conftest2.* -+ if { { case "(($ac_try" in ++ test $ac_status = 0; } > conftest.i && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_cxx_try_cpp ++ ++# ac_fn_cxx_try_link LINENO ++# ------------------------- ++# Try to link conftest.$ac_ext, and return whether this succeeded. ++ac_fn_cxx_try_link () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ rm -f conftest.$ac_objext conftest$ac_exeext ++ if { { ac_try="$ac_link" ++case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_try") 2>&5 ++ (eval "$ac_link") 2>conftest.err + ac_status=$? ++ if test -s conftest.err; then ++ grep -v '^ *+' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ mv -f conftest.er1 conftest.err ++ fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; } && -+ test -f conftest2.$ac_objext && { { case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; ++ test $ac_status = 0; } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && { ++ test "$cross_compiling" = yes || ++ $as_test_x conftest$ac_exeext ++ }; then : ++ ac_retval=0 ++else ++ $as_echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_retval=1 ++fi ++ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information ++ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would ++ # interfere with the next link command; also delete a directory that is ++ # left behind by Apple's compiler. We do this before executing the actions. ++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} ++ as_fn_set_status $ac_retval ++ ++} # ac_fn_cxx_try_link ++ ++# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES ++# ------------------------------------------------------- ++# Tests whether HEADER exists, giving a warning if it cannot be compiled using ++# the include files in INCLUDES and setting the cache variable VAR ++# accordingly. ++ac_fn_c_check_header_mongrel () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if eval "test \"\${$3+set}\"" = set; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval "test \"\${$3+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++else ++ # Is the header compilable? ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 ++$as_echo_n "checking $2 usability... " >&6; } ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++#include <$2> ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_header_compiler=yes ++else ++ ac_header_compiler=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 ++$as_echo "$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 ++$as_echo_n "checking $2 presence... " >&6; } ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <$2> ++_ACEOF ++if ac_fn_c_try_cpp "$LINENO"; then : ++ ac_header_preproc=yes ++else ++ ac_header_preproc=no ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 ++$as_echo "$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( ++ yes:no: ) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 ++$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ++ ;; ++ no:yes:* ) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 ++$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 ++$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 ++$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 ++$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ++ ;; +esac -+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -+$as_echo "$ac_try_echo"; } >&5 -+ (eval "$ac_try") 2>&5 -+ ac_status=$? -+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 -+ test $ac_status = 0; }; -+ then -+ # cc works too. -+ : -+ else -+ # cc exists but doesn't like -o. -+ eval ac_cv_prog_cc_${ac_cc}_c_o=no -+ fi -+ fi -+ fi - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --ac_cv_type_pid_t=no -+ eval ac_cv_prog_cc_${ac_cc}_c_o=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+rm -f core conftest* ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval "test \"\${$3+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ eval "$3=\$ac_header_compiler" ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++fi ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + - fi --echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 --echo "${ECHO_T}$ac_cv_type_pid_t" >&6 --if test $ac_cv_type_pid_t = yes; then -- : -+if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -+$as_echo "yes" >&6; } - else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -+$as_echo "no" >&6; } - --cat >>confdefs.h <<_ACEOF --#define pid_t int --_ACEOF -+$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h - - fi - --echo "$as_me:$LINENO: checking for size_t" >&5 --echo $ECHO_N "checking for size_t... $ECHO_C" >&6 --if test "${ac_cv_type_size_t+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_includes_default --int --main () --{ --if ((size_t *) 0) -- return 0; --if (sizeof (size_t)) -- return 0; -- ; -- return 0; --} -+# FIXME: we rely on the cache variable name because -+# there is no other way. -+set dummy $CC -+am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` -+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o -+if test "$am_t" != yes; then -+ # Losing compiler, so override with the script. -+ # FIXME: It is wrong to rewrite CC. -+ # But if we don't then we get into trouble of one sort or another. -+ # A longer-term fix would be to have automake use am__CC in this case, -+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" -+ CC="$am_aux_dir/compile $CC" ++} # ac_fn_c_check_header_mongrel ++ ++# ac_fn_cxx_check_header_mongrel LINENO HEADER VAR INCLUDES ++# --------------------------------------------------------- ++# Tests whether HEADER exists, giving a warning if it cannot be compiled using ++# the include files in INCLUDES and setting the cache variable VAR ++# accordingly. ++ac_fn_cxx_check_header_mongrel () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ if eval "test \"\${$3+set}\"" = set; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval "test \"\${$3+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++else ++ # Is the header compilable? ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 ++$as_echo_n "checking $2 usability... " >&6; } ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++#include <$2> ++_ACEOF ++if ac_fn_cxx_try_compile "$LINENO"; then : ++ ac_header_compiler=yes ++else ++ ac_header_compiler=no +fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 ++$as_echo "$ac_header_compiler" >&6; } + ++# Is the header present? ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 ++$as_echo_n "checking $2 presence... " >&6; } ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include <$2> ++_ACEOF ++if ac_fn_cxx_try_cpp "$LINENO"; then : ++ ac_header_preproc=yes ++else ++ ac_header_preproc=no ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 ++$as_echo "$ac_header_preproc" >&6; } + ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in #(( ++ yes:no: ) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 ++$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ++ ;; ++ no:yes:* ) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 ++$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 ++$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 ++$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 ++$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 ++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ++ ;; ++esac ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval "test \"\${$3+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ eval "$3=\$ac_header_compiler" ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++fi ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + -+ac_config_files="$ac_config_files Makefile raideng/Makefile raidutil/Makefile lib/Makefile distribution/raidutils.spec" ++} # ac_fn_cxx_check_header_mongrel + -+cat >confcache <<\_ACEOF -+# This file is a shell script that caches the results of configure -+# tests run on this system so they can be shared between configure -+# scripts and configure runs, see configure's option --config-cache. -+# It is not useful on other systems. If it contains results you don't -+# want to keep, you may remove or edit it. -+# -+# config.status only pays attention to the cache file if you give it -+# the --recheck option to rerun configure. -+# -+# `ac_cv_env_foo' variables (set or unset) will be overridden when -+# loading this file, other *unset* `ac_cv_foo' will be assigned the -+# following values. ++# ac_fn_c_check_type LINENO TYPE VAR INCLUDES ++# ------------------------------------------- ++# Tests whether TYPE exists after having included INCLUDES, setting cache ++# variable VAR accordingly. ++ac_fn_c_check_type () ++{ ++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 ++$as_echo_n "checking for $2... " >&6; } ++if eval "test \"\${$3+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ eval "$3=no" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++int ++main () ++{ ++if (sizeof ($2)) ++ return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++$4 ++int ++main () ++{ ++if (sizeof (($2))) ++ return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : + - _ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_type_size_t=yes ++else ++ eval "$3=yes" ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++eval ac_res=\$$3 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + -+# The following way of writing the cache mishandles newlines in values, -+# but we know of no workaround that is simple, portable, and efficient. -+# So, we kill variables containing newlines. -+# Ultrix sh set writes to stderr and can't be redirected directly, -+# and sets the high bit in the cache file unless we assign to the vars. ++} # ac_fn_c_check_type ++cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + + It was created by I2O RAID Utilities $as_me 0.0.6, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.67. Invocation command line was + + $ $0 $@ + + _ACEOF ++exec 5>>config.log + { + cat <<_ASUNAME + ## --------- ## +@@ -1194,7 +2247,7 @@ uname -v = `(uname -v) 2>/dev/null || ec + /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +-hostinfo = `(hostinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` + /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` + /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +@@ -1206,8 +2259,9 @@ for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- echo "PATH: $as_dir" +-done ++ $as_echo "PATH: $as_dir" ++ done ++IFS=$as_save_IFS + + } >&5 + +@@ -1229,7 +2283,6 @@ _ACEOF + ac_configure_args= + ac_configure_args0= + ac_configure_args1= +-ac_sep= + ac_must_keep_next=false + for ac_pass in 1 2 + do +@@ -1240,13 +2293,13 @@ do + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?\"\']*) +- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ++ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in +- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; ++ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) +- ac_configure_args1="$ac_configure_args1 '$ac_arg'" ++ as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else +@@ -1262,104 +2315,115 @@ do + -* ) ac_must_keep_next=true ;; + esac + fi +- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" +- # Get rid of the leading space. +- ac_sep=" " ++ as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done + done +-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } ++{ ac_configure_args0=; unset ac_configure_args0;} ++{ ac_configure_args1=; unset ac_configure_args1;} + + # When interrupted or exit'd, cleanup temporary files, and complete + # config.log. We remove comments because anyway the quotes in there + # would cause problems or look ugly. +-# WARNING: Be sure not to use single quotes in there, as some shells, +-# such as our DU 5.0 friend, will then `close' the trap. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. + trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + +- cat <<\_ASBOX +-## ---------------- ## ++ $as_echo "## ---------------- ## + ## Cache variables. ## +-## ---------------- ## +-_ASBOX ++## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +-{ +( -+ for ac_var in `(set) 2>&1 | sed -n 's/^$[a-zA-Z_][a-zA-Z0-9_]*$=.*/\1/p'`; do ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^$[a-zA-Z_][a-zA-Z0-9_]*$=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) @@ -63242,3043 +33329,2538 @@ + esac ;; + esac + done -+ -+ (set) 2>&1 | -+ case $as_nl`(ac_space=' '; set) 2>&1` in #( + (set) 2>&1 | +- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) -+ # `set' does not quote correctly, so add quotes: double-quote -+ # substitution turns \\\\ into \\, and sed turns \\ into \. -+ sed -n \ -+ "s/'/'\\\\''/g; -+ s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='\\2'/p" + sed -n \ +- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; +- s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='"'"'\\2'"'"'/p" +- ;; ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='\''\\2'\''/p" + ;; #( -+ *) -+ # `set' quotes correctly as required by POSIX, so do not add quotes. -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" -+ ;; -+ esac | -+ sort -+) | -+ sed ' -+ /^ac_cv_env_/b end -+ t clear -+ :clear -+ s/^$[^=]*$=$.*[{}].*$$/test "${\1+set}" = set || &/ -+ t end -+ s/^$[^=]*$=$.*$$/\1=${\1=\2}/ -+ :end' >>confcache -+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else -+ if test -w "$cache_file"; then -+ test "x$cache_file" != "x/dev/null" && -+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -+$as_echo "$as_me: updating cache $cache_file" >&6;} -+ cat confcache >$cache_file -+ else -+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} -+ fi -+fi -+rm -f confcache -+ -+test "x$prefix" = xNONE && prefix=$ac_default_prefix -+# Let make expand exec_prefix. -+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -+ -+DEFS=-DHAVE_CONFIG_H -+ -+ac_libobjs= -+ac_ltlibobjs= -+U= -+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue -+ # 1. Remove the extension, and $U if already installed. -+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' -+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"` -+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR -+ # will be set to the directory where LIBOBJS objects are built. -+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" -+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -+done -+LIBOBJS=$ac_libobjs -+ -+LTLIBOBJS=$ac_ltlibobjs -+ -+ -+ if test -n "$EXEEXT"; then -+ am__EXEEXT_TRUE= -+ am__EXEEXT_FALSE='#' - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ am__EXEEXT_TRUE='#' -+ am__EXEEXT_FALSE= -+fi - --ac_cv_type_size_t=no -+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then -+ as_fn_error $? "conditional \"AMDEP\" was never defined. -+Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then -+ as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. -+Usually this means the macro was only invoked conditionally." "$LINENO" 5 - fi --echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 --echo "${ECHO_T}$ac_cv_type_size_t" >&6 --if test $ac_cv_type_size_t = yes; then -- : --else -+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then -+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -+Usually this means the macro was only invoked conditionally." "$LINENO" 5 -+fi -+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then -+ as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. -+Usually this means the macro was only invoked conditionally." "$LINENO" 5 -+fi -+ -+: ${CONFIG_STATUS=./config.status} -+ac_write_fail=0 -+ac_clean_files_save=$ac_clean_files -+ac_clean_files="$ac_clean_files $CONFIG_STATUS" -+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -+as_write_fail=0 -+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -+#! $SHELL -+# Generated by $as_me. -+# Run this file to recreate the current configuration. -+# Compiler output produced by configure, useful for debugging -+# configure, is in config.log if it exists. - --cat >>confdefs.h <<_ACEOF --#define size_t unsigned --_ACEOF -+debug=false -+ac_cs_recheck=false -+ac_cs_silent=false - --fi -+SHELL=\${CONFIG_SHELL-$SHELL} -+export SHELL -+_ASEOF -+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -+## -------------------- ## -+## M4sh Initialization. ## -+## -------------------- ## - --echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 --echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6 --if test "${ac_cv_header_time+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : -+ emulate sh -+ NULLCMD=: -+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include --#include --#include -+ case `(set -o) 2>/dev/null` in #( -+ *posix*) : -+ set -o posix ;; #( -+ *) : -+ ;; -+esac -+fi - --int --main () --{ --if ((struct tm *) 0) --return 0; -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_header_time=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_header_time=no -+as_nl=' -+' -+export as_nl -+# Printing a long string crashes Solaris 7 /usr/bin/printf. -+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -+# Prefer a ksh shell builtin over an external printf program on Solaris, -+# but without wasting forks for bash or zsh. -+if test -z "$BASH_VERSION$ZSH_VERSION" \ -+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then -+ as_echo='print -r --' -+ as_echo_n='print -rn --' -+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then -+ as_echo='printf %s\n' -+ as_echo_n='printf %s' -+else -+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then -+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' -+ as_echo_n='/usr/ucb/echo -n' -+ else -+ as_echo_body='eval expr "X$1" : "X\$.*\$"' -+ as_echo_n_body='eval -+ arg=$1; -+ case $arg in #( -+ *"$as_nl"*) -+ expr "X$arg" : "X\$.*\$$as_nl"; -+ arg=`expr "X$arg" : ".*$as_nl\$.*\$"`;; -+ esac; -+ expr "X$arg" : "X\$.*\$" | tr -d "$as_nl" -+ ' -+ export as_echo_n_body -+ as_echo_n='sh -c $as_echo_n_body as_echo' -+ fi -+ export as_echo_body -+ as_echo='sh -c $as_echo_body as_echo' - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ PATH_SEPARATOR=: -+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { -+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || -+ PATH_SEPARATOR=';' -+ } - fi --echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 --echo "${ECHO_T}$ac_cv_header_time" >&6 --if test $ac_cv_header_time = yes; then - --cat >>confdefs.h <<\_ACEOF --#define TIME_WITH_SYS_TIME 1 --_ACEOF - --fi -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in #(( -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+ done -+IFS=$as_save_IFS - --echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 --echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6 --if test "${ac_cv_struct_tm+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include --#include -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ exit 1 -+fi -+ -+# Unset variables that we do not need and which cause bugs (e.g. in -+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -+# suppresses any "Segmentation fault" message there. '((' could -+# trigger a bug in pdksh 5.2.14. -+for as_var in BASH_ENV ENV MAIL MAILPATH -+do eval test x\${$as_var+set} = xset \ -+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -+done -+PS1='$ ' -+PS2='> ' -+PS4='+ ' - --int --main () --{ --struct tm *tp; tp->tm_sec; -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_struct_tm=time.h --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+# NLS nuisances. -+LC_ALL=C -+export LC_ALL -+LANGUAGE=C -+export LANGUAGE - --ac_cv_struct_tm=sys/time.h --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 --echo "${ECHO_T}$ac_cv_struct_tm" >&6 --if test $ac_cv_struct_tm = sys/time.h; then -+# CDPATH. -+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - --cat >>confdefs.h <<\_ACEOF --#define TM_IN_SYS_TIME 1 --_ACEOF - --fi -+# as_fn_error STATUS ERROR [LINENO LOG_FD] -+# ---------------------------------------- -+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -+# script with STATUS, using 1 if that was 0. -+as_fn_error () -+{ -+ as_status=$1; test $as_status -eq 0 && as_status=1 -+ if test "$4"; then -+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack -+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 -+ fi -+ $as_echo "$as_me: error: $2" >&2 -+ as_fn_exit $as_status -+} # as_fn_error -+ -+ -+# as_fn_set_status STATUS -+# ----------------------- -+# Set $? to STATUS, without forking. -+as_fn_set_status () -+{ -+ return $1 -+} # as_fn_set_status -+ -+# as_fn_exit STATUS -+# ----------------- -+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -+as_fn_exit () -+{ -+ set +e -+ as_fn_set_status $1 -+ exit $1 -+} # as_fn_exit -+ -+# as_fn_unset VAR -+# --------------- -+# Portably unset VAR. -+as_fn_unset () -+{ -+ { eval $1=; unset $1;} -+} -+as_unset=as_fn_unset -+# as_fn_append VAR VALUE -+# ---------------------- -+# Append the text in VALUE to the end of the definition contained in VAR. Take -+# advantage of any shell optimizations that allow amortized linear growth over -+# repeated appends, instead of the typical quadratic growth present in naive -+# implementations. -+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : -+ eval 'as_fn_append () -+ { -+ eval $1+=\$2 -+ }' -+else -+ as_fn_append () -+ { -+ eval $1=\$$1\$2 -+ } -+fi # as_fn_append - --echo "$as_me:$LINENO: checking for working volatile" >&5 --echo $ECHO_N "checking for working volatile... $ECHO_C" >&6 --if test "${ac_cv_c_volatile+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+# as_fn_arith ARG... -+# ------------------ -+# Perform arithmetic evaluation on the ARGs, and store the result in the -+# global $as_val. Take advantage of shells that can avoid forks. The arguments -+# must be portable across $(()) and expr. -+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : -+ eval 'as_fn_arith () -+ { -+ as_val=$(( $* )) -+ }' - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ -+ as_fn_arith () -+ { -+ as_val=`expr "$@" || test $? -eq 1` -+ } -+fi # as_fn_arith + *) +- sed -n \ +- "s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} ++ esac | ++ sort ++) + echo --int --main () --{ +- cat <<\_ASBOX +-## ----------------- ## ++ $as_echo "## ----------------- ## + ## Output variables. ## +-## ----------------- ## +-_ASBOX ++## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo --volatile int x; --int * volatile y; -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_c_volatile=yes -+if expr a : '$a$' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*$...$'`" = X001; then -+ as_expr=expr - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ as_expr=false -+fi + if test -n "$ac_subst_files"; then +- cat <<\_ASBOX +-## ------------- ## +-## Output files. ## +-## ------------- ## +-_ASBOX ++ $as_echo "## ------------------- ## ++## File substitutions. ## ++## ------------------- ##" + echo + for ac_var in $ac_subst_files + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi --ac_cv_c_volatile=no -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then -+ as_basename=basename -+else -+ as_basename=false - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + if test -s confdefs.h; then +- cat <<\_ASBOX +-## ----------- ## ++ $as_echo "## ----------- ## + ## confdefs.h. ## +-## ----------- ## +-_ASBOX ++## ----------- ##" + echo +- sed "/^$/d" confdefs.h | sort ++ cat confdefs.h + echo + fi + test "$ac_signal" != 0 && +- echo "$as_me: caught signal $ac_signal" +- echo "$as_me: exit $exit_status" ++ $as_echo "$as_me: caught signal $ac_signal" ++ $as_echo "$as_me: exit $exit_status" + } >&5 +- rm -f core *.core && +- rm -rf conftest* confdefs* conf$$* $ac_clean_files && ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +- ' 0 ++' 0 + for ac_signal in 1 2 13 15; do +- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal ++ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal + done + ac_signal=0 + + # confdefs.h avoids OS command line length limits that DEFS can exceed. +-rm -rf conftest* confdefs.h +-# AIX cpp loses on an empty file, so make sure it contains at least a newline. +-echo >confdefs.h ++rm -f -r conftest* confdefs.h + -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false - fi --echo "$as_me:$LINENO: result: $ac_cv_c_volatile" >&5 --echo "${ECHO_T}$ac_cv_c_volatile" >&6 --if test $ac_cv_c_volatile = no; then ++$as_echo "/* confdefs.h */" > confdefs.h --cat >>confdefs.h <<\_ACEOF --#define volatile --_ACEOF -+as_me=`$as_basename -- "$0" || -+$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \ -+ X"$0" : 'X$//$$' \| \ -+ X"$0" : 'X$/$' \| . 2>/dev/null || -+$as_echo X/"$0" | -+ sed '/^.*\/$[^/][^/]*$\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/$\/\/$$/{ -+ s//\1/ -+ q -+ } -+ /^X\/$\/$.*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` + # Predefined preprocessor variables. --fi -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits +@@ -1367,112 +2431,137 @@ cat >>confdefs.h <<_ACEOF + #define PACKAGE_NAME "$PACKAGE_NAME" + _ACEOF -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in #((((( -+-n*) -+ case `echo 'xy\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ xy) ECHO_C='\c';; -+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null -+ ECHO_T=' ';; -+ esac;; -+*) -+ ECHO_N='-n';; -+esac +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_TARNAME "$PACKAGE_TARNAME" + _ACEOF --# Checks for library functions. --echo "$as_me:$LINENO: checking whether closedir returns void" >&5 --echo $ECHO_N "checking whether closedir returns void... $ECHO_C" >&6 --if test "${ac_cv_func_closedir_void+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file - else -- if test "$cross_compiling" = yes; then -- ac_cv_func_closedir_void=yes -+ rm -f conf$$.dir -+ mkdir conf$$.dir 2>/dev/null -+fi -+if (echo >conf$$.file) 2>/dev/null; then -+ if ln -s conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -+ as_ln_s='cp -p' -+ elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+ else -+ as_ln_s='cp -p' -+ fi - else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_includes_default --#include <$ac_header_dirent> --#ifndef __cplusplus --int closedir (); --#endif -+ as_ln_s='cp -p' -+fi -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_VERSION "$PACKAGE_VERSION" + _ACEOF --int --main () +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_STRING "$PACKAGE_STRING" + _ACEOF + +- + cat >>confdefs.h <<_ACEOF + #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" + _ACEOF + ++cat >>confdefs.h <<_ACEOF ++#define PACKAGE_URL "$PACKAGE_URL" ++_ACEOF + -+# as_fn_mkdir_p -+# ------------- -+# Create "$as_dir" as a directory, including parents if necessary. -+as_fn_mkdir_p () - { --exit (closedir (opendir (".")) != 0); -- ; -- return 0; --} --_ACEOF --rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_func_closedir_void=no --else -- echo "$as_me: program exited with status $ac_status" >&5 --echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 --( exit $ac_status ) --ac_cv_func_closedir_void=yes --fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; + # Let the site file select an alternate cache file if it wants to. +-# Prefer explicitly selected file to automatically selected ones. +-if test -z "$CONFIG_SITE"; then +- if test "x$prefix" != xNONE; then +- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" +- else +- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +- fi ++# Prefer an explicitly selected file to automatically selected ones. ++ac_site_file1=NONE ++ac_site_file2=NONE ++if test -n "$CONFIG_SITE"; then ++ # We do not want a PATH search for config.site. ++ case $CONFIG_SITE in #(( ++ -*) ac_site_file1=./$CONFIG_SITE;; ++ */*) ac_site_file1=$CONFIG_SITE;; ++ *) ac_site_file1=./$CONFIG_SITE;; + esac -+ test -d "$as_dir" || eval $as_mkdir_p || { -+ as_dirs= -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || -+$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -+ X"$as_dir" : 'X$//$[^/]' \| \ -+ X"$as_dir" : 'X$//$$' \| \ -+ X"$as_dir" : 'X$/$' \| . 2>/dev/null || -+$as_echo X"$as_dir" | -+ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/$.*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break -+ done -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" -+ -+ -+} # as_fn_mkdir_p -+if mkdir -p . 2>/dev/null; then -+ as_mkdir_p='mkdir -p "$as_dir"' -+else -+ test -d ./-p && rmdir ./-p -+ as_mkdir_p=false - fi -+ -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' ++elif test "x$prefix" != xNONE; then ++ ac_site_file1=$prefix/share/config.site ++ ac_site_file2=$prefix/etc/config.site +else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in #( -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' ++ ac_site_file1=$ac_default_prefix/share/config.site ++ ac_site_file2=$ac_default_prefix/etc/config.site fi --echo "$as_me:$LINENO: result: $ac_cv_func_closedir_void" >&5 --echo "${ECHO_T}$ac_cv_func_closedir_void" >&6 --if test $ac_cv_func_closedir_void = yes; then -+as_executable_p=$as_test_x - --cat >>confdefs.h <<\_ACEOF --#define CLOSEDIR_VOID 1 --_ACEOF -+# Sed expression to map a string onto a valid CPP name. -+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - --fi -+# Sed expression to map a string onto a valid variable name. -+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - +-for ac_site_file in $CONFIG_SITE; do +- if test -r "$ac_site_file"; then +- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +-echo "$as_me: loading site script $ac_site_file" >&6;} ++for ac_site_file in "$ac_site_file1" "$ac_site_file2" ++do ++ test "x$ac_site_file" = xNONE && continue ++ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 ++$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 +- . "$ac_site_file" ++ . "$ac_site_file" \ ++ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "failed to load site script $ac_site_file ++See \`config.log' for more details" "$LINENO" 5 ; } + fi + done -+exec 6>&1 -+## ----------------------------------- ## -+## Main body of $CONFIG_STATUS script. ## -+## ----------------------------------- ## -+_ASEOF -+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + if test -r "$cache_file"; then +- # Some versions of bash will fail to source /dev/null (special +- # files actually), so we avoid doing that. +- if test -f "$cache_file"; then +- { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +-echo "$as_me: loading cache $cache_file" >&6;} ++ # Some versions of bash will fail to source /dev/null (special files ++ # actually), so we avoid doing that. DJGPP emulates it as a regular file. ++ if test /dev/null != "$cache_file" && test -f "$cache_file"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 ++$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in +- [\\/]* | ?:[\\/]* ) . $cache_file;; +- *) . ./$cache_file;; ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; + esac + fi + else +- { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +-echo "$as_me: creating cache $cache_file" >&6;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 ++$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file + fi --for ac_header in unistd.h vfork.h --do --as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 + # Check that the precious variables saved in the cache have kept the same + # value. + ac_cache_corrupted=false +-for ac_var in `(set) 2>&1 | +- sed -n 's/^ac_env_$[a-zA-Z_0-9]*$_set=.*/\1/p'`; do ++for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set +- eval ac_old_val="\$ac_cv_env_${ac_var}_value" +- eval ac_new_val="\$ac_env_${ac_var}_value" ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) +- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) +- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 ++$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then +- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} +- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +-echo "$as_me: former value: $ac_old_val" >&2;} +- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +-echo "$as_me: current value: $ac_new_val" >&2;} +- ac_cache_corrupted=: ++ # differences in whitespace do not lead to failure. ++ ac_old_val_w=`echo x $ac_old_val` ++ ac_new_val_w=`echo x $ac_new_val` ++ if test "$ac_old_val_w" != "$ac_new_val_w"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 ++$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ ac_cache_corrupted=: ++ else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 ++$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} ++ eval $ac_var=\$ac_old_val ++ fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 ++$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 ++$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?\"\']*) +- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. +- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; ++ *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi + done + if $ac_cache_corrupted; then +- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +-echo "$as_me: error: changes in the environment can compromise the build" >&2;} +- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} +- { (exit 1); exit 1; }; } -fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 --else -- # Is the header compilable? --echo "$as_me:$LINENO: checking $ac_header usability" >&5 --echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_includes_default --#include <$ac_header> --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_header_compiler=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+# Save the log message, to keep $0 and so on meaningful, and to -+# report actual input values of CONFIG_FILES etc. instead of their -+# values after options handling. -+ac_log=" -+This file was extended by I2O RAID Utilities $as_me 0.0.6, which was -+generated by GNU Autoconf 2.67. Invocation command line was ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 ++$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 ++fi ++## -------------------- ## ++## Main body of script. ## ++## -------------------- ## --ac_header_compiler=no --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 --echo "${ECHO_T}$ac_header_compiler" >&6 -+ CONFIG_FILES = $CONFIG_FILES -+ CONFIG_HEADERS = $CONFIG_HEADERS -+ CONFIG_LINKS = $CONFIG_LINKS -+ CONFIG_COMMANDS = $CONFIG_COMMANDS -+ $ $0 $@ -+ -+on `(hostname || uname -n) 2>/dev/null | sed 1q` -+" + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -1482,58 +2571,39 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu --# Is the header present? --echo "$as_me:$LINENO: checking $ac_header presence" >&5 --echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include <$ac_header> - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -- ac_header_preproc=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- ac_header_preproc=no --fi --rm -f conftest.err conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 --echo "${ECHO_T}$ac_header_preproc" >&6 -+case $ac_config_files in *" -+"*) set x $ac_config_files; shift; ac_config_files=$*;; -+esac --# So? What about this header? --case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in -- yes:no: ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 --echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} -- ac_header_preproc=yes -- ;; -- no:yes:* ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 --echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 --echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 --echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 --echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 --echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} -- ( -- cat <<\_ASBOX --## --------------------------------------------- ## --## Report this to the I2O RAID Utilities lists. ## --## --------------------------------------------- ## --_ASBOX -- ) | -- sed "s/^/$as_me: WARNING: /" >&2 -- ;; -+case $ac_config_headers in *" -+"*) set x $ac_config_headers; shift; ac_config_headers=$*;; - esac --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- eval "$as_ac_Header=\$ac_header_preproc" --fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_config_headers="$ac_config_headers config.h" --fi --if test `eval echo '${'$as_ac_Header'}'` = yes; then -- cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -+ -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+# Files that config.status was made for. -+config_files="$ac_config_files" -+config_headers="$ac_config_headers" -+config_commands="$ac_config_commands" -+ - _ACEOF --fi -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+ac_cs_usage="\ -+\`$as_me' instantiates files and other configuration actions -+from templates according to the current configuration. Unless the files -+and actions are specified as TAGs, all are instantiated by default. ++am__api_version='1.11' --done -+Usage: $0 [OPTION]... [TAG]... -+ -+ -h, --help print this help, then exit -+ -V, --version print version number and configuration settings, then exit -+ --config print configuration, then exit -+ -q, --quiet, --silent -+ do not print progress messages -+ -d, --debug don't remove temporary files -+ --recheck update $as_me by reconfiguring in the same conditions -+ --file=FILE[:TEMPLATE] -+ instantiate the configuration file FILE -+ --header=FILE[:TEMPLATE] -+ instantiate the configuration header FILE +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- ac_config_headers="$ac_config_headers config.h" +- +-am__api_version="1.9" + ac_aux_dir= +-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do +- if test -f $ac_dir/install-sh; then ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break +- elif test -f $ac_dir/install.sh; then ++ elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break +- elif test -f $ac_dir/shtool; then ++ elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi + done + if test -z "$ac_aux_dir"; then +- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} +- { (exit 1); exit 1; }; } +-fi +-ac_config_guess="$SHELL $ac_aux_dir/config.guess" +-ac_config_sub="$SHELL $ac_aux_dir/config.sub" +-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. ++ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 ++fi + -+Configuration files: -+$config_files ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + -+Configuration headers: -+$config_headers -+Configuration commands: -+$config_commands - -+Report bugs to the package provider." - --for ac_func in fork vfork --do --as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` --echo "$as_me:$LINENO: checking for $ac_func" >&5 --echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 --if eval "test \"\${$as_ac_var+set}\" = set"; then + # Find a good install program. We prefer a C program (faster), + # so one script is as good as another. But avoid the broken or +@@ -1548,22 +2618,23 @@ ac_configure="$SHELL $ac_aux_dir/configu + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 ++# Reject install programs that cannot install multiple files. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 ++$as_echo_n "checking for a BSD-compatible install... " >&6; } + if test -z "$INSTALL"; then +-if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ - _ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --/* Define $ac_func to an innocuous variant, in case declares $ac_func. -- For example, HP-UX 11i declares gettimeofday. */ --#define $ac_func innocuous_$ac_func -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -+ac_cs_version="\\ -+I2O RAID Utilities config.status 0.0.6 -+configured by $0, generated by GNU Autoconf 2.67, -+ with options \\"\$ac_cs_config\\" - --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char $ac_func (); below. -- Prefer to if __STDC__ is defined, since -- exists even on freestanding compilers. */ -+Copyright (C) 2010 Free Software Foundation, Inc. -+This config.status script is free software; the Free Software Foundation -+gives unlimited permission to copy, distribute and modify it." - --#ifdef __STDC__ --# include --#else --# include --#endif -+ac_pwd='$ac_pwd' -+srcdir='$srcdir' -+INSTALL='$INSTALL' -+MKDIR_P='$MKDIR_P' -+AWK='$AWK' -+test -n "\$AWK" || AWK=awk -+_ACEOF - --#undef $ac_func -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+# The default lists apply if the user does not specify any file. -+ac_need_defaults=: -+while test $# != 0 -+do -+ case $1 in -+ --*=?*) -+ ac_option=`expr "X$1" : 'X$[^=]*$='` -+ ac_optarg=`expr "X$1" : 'X[^=]*=$.*$'` -+ ac_shift=: -+ ;; -+ --*=) -+ ac_option=`expr "X$1" : 'X$[^=]*$='` -+ ac_optarg= -+ ac_shift=: -+ ;; -+ *) -+ ac_option=$1 -+ ac_optarg=$2 -+ ac_shift=shift -+ ;; -+ esac ++if test "${ac_cv_path_install+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- # Account for people who put trailing slashes in PATH elements. +-case $as_dir/ in +- ./ | .// | /cC/* | \ ++ # Account for people who put trailing slashes in PATH elements. ++case $as_dir/ in #(( ++ ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ +- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ ++ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. +@@ -1571,7 +2642,7 @@ case $as_dir/ in + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +@@ -1581,30 +2652,43 @@ case $as_dir/ in + # program-specific install script used by HP pwplus--don't use. + : + else +- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" +- break 3 ++ rm -rf conftest.one conftest.two conftest.dir ++ echo one > conftest.one ++ echo two > conftest.two ++ mkdir conftest.dir ++ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && ++ test -s conftest.one && test -s conftest.two && ++ test -s conftest.dir/conftest.one && ++ test -s conftest.dir/conftest.two ++ then ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 ++ fi + fi + fi + done + done + ;; + esac +-done --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --{ --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char $ac_func (); --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub_$ac_func) || defined (__stub___$ac_func) --choke me --#else --char (*f) () = $ac_func; --#endif --#ifdef __cplusplus --} --#endif -+ case $ac_option in -+ # Handling of the options. -+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) -+ ac_cs_recheck=: ;; -+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) -+ $as_echo "$ac_cs_version"; exit ;; -+ --config | --confi | --conf | --con | --co | --c ) -+ $as_echo "$ac_cs_config"; exit ;; -+ --debug | --debu | --deb | --de | --d | -d ) -+ debug=: ;; -+ --file | --fil | --fi | --f ) -+ $ac_shift -+ case $ac_optarg in -+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ '') as_fn_error $? "missing file argument" ;; -+ esac -+ as_fn_append CONFIG_FILES " '$ac_optarg'" -+ ac_need_defaults=false;; -+ --header | --heade | --head | --hea ) -+ $ac_shift -+ case $ac_optarg in -+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ esac -+ as_fn_append CONFIG_HEADERS " '$ac_optarg'" -+ ac_need_defaults=false;; -+ --he | --h) -+ # Conflict between --help and --header -+ as_fn_error $? "ambiguous option: \`$1' -+Try \`$0 --help' for more information.";; -+ --help | --hel | -h ) -+ $as_echo "$ac_cs_usage"; exit ;; -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil | --si | --s) -+ ac_cs_silent=: ;; ++ done ++IFS=$as_save_IFS ++ ++rm -rf conftest.one conftest.two conftest.dir --int --main () --{ --return f != $ac_func; -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- eval "$as_ac_var=yes" --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ # This is an error. -+ -*) as_fn_error $? "unrecognized option: \`$1' -+Try \`$0 --help' for more information." ;; + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. ++ # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi + fi +-echo "$as_me:$LINENO: result: $INSTALL" >&5 +-echo "${ECHO_T}$INSTALL" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 ++$as_echo "$INSTALL" >&6; } --eval "$as_ac_var=no" --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 --if test `eval echo '${'$as_ac_var'}'` = yes; then -- cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 --_ACEOF -+ *) as_fn_append ac_config_targets " $1" -+ ac_need_defaults=false ;; + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -1614,21 +2698,34 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR --fi -+ esac -+ shift - done + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' --if test "x$ac_cv_func_fork" = xyes; then -- echo "$as_me:$LINENO: checking for working fork" >&5 --echo $ECHO_N "checking for working fork... $ECHO_C" >&6 --if test "${ac_cv_func_fork_works+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test "$cross_compiling" = yes; then -- ac_cv_func_fork_works=cross --else -- cat >conftest.$ac_ext <<_ACEOF --/* By Ruediger Kuhlmann. */ -- #include -- #if HAVE_UNISTD_H -- # include -- #endif -- /* Some systems only have a dummy stub for fork() */ -- int main () -- { -- if (fork() < 0) -- exit (1); -- exit (0); -- } +-echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 ++$as_echo_n "checking whether build environment is sane... " >&6; } + # Just in case + sleep 1 + echo timestamp > conftest.file ++# Reject unsafe characters in $srcdir or the absolute working directory ++# name. Accept space and tab only in the latter. ++am_lf=' ++' ++case `pwd` in ++ *[\\\"\#\$\&\'\`$am_lf]*) ++ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;; ++esac ++case $srcdir in ++ *[\\\"\#\$\&\'\`$am_lf\ \ ]*) ++ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;; ++esac ++ + # Do `set' in a subshell so we don't clobber the current shell's + # arguments. Must try -L first in case configure is actually a + # symlink; some systems play weird games with the mod time of symlinks + # (eg FreeBSD returns the mod time of the symlink's containing + # directory). + if ( +- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. +- set X `ls -t $srcdir/configure conftest.file` ++ set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ +@@ -1638,11 +2735,8 @@ if ( + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". +- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +-alias in your environment" >&5 +-echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +-alias in your environment" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken ++alias in your environment" "$LINENO" 5 + fi + + test "$2" = conftest.file +@@ -1651,139 +2745,268 @@ then + # Ok. + : + else +- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! +-Check your system clock" >&5 +-echo "$as_me: error: newly created file is older than distributed files! +-Check your system clock" >&2;} +- { (exit 1); exit 1; }; } ++ as_fn_error $? "newly created file is older than distributed files! ++Check your system clock" "$LINENO" 5 + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } + test "$program_prefix" != NONE && +- program_transform_name="s,^,$program_prefix,;$program_transform_name" ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" + # Use a double $ so make ignores it. + test "$program_suffix" != NONE && +- program_transform_name="s,\$,$program_suffix,;$program_transform_name" +-# Double any \ or $. echo might interpret backslashes. ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" ++# Double any \ or $. + # By default was `s,x,x', remove it if useless. +-cat <<\_ACEOF >conftest.sed +-s/[\\$]/&&/g;s/;s,x,x,$// -_ACEOF --rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_func_fork_works=yes --else -- echo "$as_me: program exited with status $ac_status" >&5 --echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+ac_configure_extra_args= +-program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +-rm conftest.sed ++ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' ++program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` --( exit $ac_status ) --ac_cv_func_fork_works=no --fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext --fi -+if $ac_cs_silent; then -+ exec 6>/dev/null -+ ac_configure_extra_args="$ac_configure_extra_args --silent" + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` + +-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++if test x"${MISSING+set}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; ++ *) ++ MISSING="\${SHELL} $am_aux_dir/missing" ;; ++ esac ++fi + # Use eval to expand $SHELL + if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " + else + am_missing_run= +- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 ++$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi --echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5 --echo "${ECHO_T}$ac_cv_func_fork_works" >&6 +-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then +- # We used to keeping the `.' as first argument, in order to +- # allow $(mkdir_p) to be used without argument. As in +- # $(mkdir_p) $(somedir) +- # where $(somedir) is conditionally defined. However this is wrong +- # for two reasons: +- # 1. if the package is installed by a user who cannot write `.' +- # make install will fail, +- # 2. the above comment should most certainly read +- # $(mkdir_p) $(DESTDIR)$(somedir) +- # so it does not work when $(somedir) is undefined and +- # $(DESTDIR) is not. +- # To support the latter case, we have to write +- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), +- # so the `.' trick is pointless. +- mkdir_p='mkdir -p --' -else -- ac_cv_func_fork_works=$ac_cv_func_fork --fi --if test "x$ac_cv_func_fork_works" = xcross; then -- case $host in -- *-*-amigaos* | *-*-msdosdjgpp*) -- # Override, as these systems have only a dummy fork() stub -- ac_cv_func_fork_works=no -- ;; -- *) -- ac_cv_func_fork_works=yes -- ;; -- esac -- { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 --echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+if \$ac_cs_recheck; then -+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -+ shift -+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 -+ CONFIG_SHELL='$SHELL' -+ export CONFIG_SHELL -+ exec "\$@" +- # On NextStep and OpenStep, the `mkdir' command does not +- # recognize any option. It will interpret all options as +- # directories to create, and then abort because `.' already +- # exists. +- for d in ./-p ./--version; +- do +- test -d $d && rmdir $d +- done +- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. +- if test -f "$ac_aux_dir/mkinstalldirs"; then +- mkdir_p='$(mkinstalldirs)' +- else +- mkdir_p='$(install_sh) -d' +- fi ++if test x"${install_sh}" != xset; then ++ case $am_aux_dir in ++ *\ * | *\ *) ++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; ++ *) ++ install_sh="\${SHELL} $am_aux_dir/install-sh" ++ esac fi --ac_cv_func_vfork_works=$ac_cv_func_vfork --if test "x$ac_cv_func_vfork" = xyes; then -- echo "$as_me:$LINENO: checking for working vfork" >&5 --echo $ECHO_N "checking for working vfork... $ECHO_C" >&6 --if test "${ac_cv_func_vfork_works+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test "$cross_compiling" = yes; then -- ac_cv_func_vfork_works=cross --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ -+ - _ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --/* Thanks to Paul Eggert for this test. */ --#include --#include --#include --#include --#include --#if HAVE_UNISTD_H --# include --#endif --#if HAVE_VFORK_H --# include --#endif --/* On some sparc systems, changes by the child to local and incoming -- argument registers are propagated back to the parent. The compiler -- is told about this with #include , but some compilers -- (e.g. gcc -O) don't grok . Test for this by using a -- static variable whose address is put into a register that is -- clobbered by the vfork. */ --static void --#ifdef __cplusplus --sparc_address_test (int arg) --# else --sparc_address_test (arg) int arg; --#endif -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+exec 5>>config.log - { -- static pid_t child; -- if (!child) { -- child = vfork (); -- if (child < 0) { -- perror ("vfork"); -- _exit(2); -- } -- if (!child) { -- arg = getpid(); -- write(-1, "", 0); -- _exit (arg); -- } -- } --} -+ echo -+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -+## Running $as_me. ## -+_ASBOX -+ $as_echo "$ac_log" -+} >&5 - --int --main () --{ -- pid_t parent = getpid (); -- pid_t child; -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+# -+# INIT-COMMANDS -+# -+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - -- sparc_address_test (0); - -- child = vfork (); -+# The HP-UX ksh and POSIX shell print the target directory to stdout -+# if CDPATH is set. -+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -- if (child == 0) { -- /* Here is another test for sparc vfork register problems. This -- test uses lots of local variables, at least as many local -- variables as main has allocated so far including compiler -- temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris -- 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should -- reuse the register of parent for one of the local variables, -- since it will think that parent can't possibly be used any more -- in this routine. Assigning to the local variable will thus -- munge parent in the parent process. */ -- pid_t -- p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), -- p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); -- /* Convince the compiler that p..p7 are live; otherwise, it might -- use the same hardware register for all 8 local variables. */ -- if (p != p1 || p != p2 || p != p3 || p != p4 -- || p != p5 || p != p6 || p != p7) -- _exit(1); -+sed_quote_subst='$sed_quote_subst' -+double_quote_subst='$double_quote_subst' -+delay_variable_subst='$delay_variable_subst' -+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' -+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' -+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' -+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' -+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' -+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' -+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' -+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' -+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' -+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' -+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' -+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' -+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' -+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' -+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' -+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' -+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' -+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' -+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' -+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' -+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' -+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' -+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' -+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' -+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' -+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' -+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' -+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' -+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' -+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' -+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' -+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' -+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' -+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' -+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' -+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' -+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' -+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' -+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' -+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' -+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' -+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' -+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' -+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' -+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' -+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' -+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' -+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' -+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' -+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' -+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' -+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' -+DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' -+NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' -+LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' -+OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' -+OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' -+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' -+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' -+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' -+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' -+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' -+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' -+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' -+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' -+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' -+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' -+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' -+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' -+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' -+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' -+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' -+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' -+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' -+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' -+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' -+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' -+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' -+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' -+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' -+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' -+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' -+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' -+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' -+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' -+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' -+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' -+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' -+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' -+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' -+compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`' -+predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`' -+postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`' -+predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`' -+postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`' -+compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`' -+LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' -+compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' +-for ac_prog in gawk mawk nawk awk +-do +- # Extract the first word of "$ac_prog", so it can be a program name with args. +-set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_AWK+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++if test "$cross_compiling" != no; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- if test -n "$AWK"; then +- ac_cv_prog_AWK="$AWK" # Let the user override the test. ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_AWK="$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done ++IFS=$as_save_IFS + -+LTCC='$LTCC' -+LTCFLAGS='$LTCFLAGS' -+compiler='$compiler_DEFAULT' ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 ++$as_echo "$STRIP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi + -+# Quote evaled strings. -+for var in SED \ -+GREP \ -+EGREP \ -+FGREP \ -+LD \ -+NM \ -+LN_S \ -+lt_SP2NL \ -+lt_NL2SP \ -+reload_flag \ -+OBJDUMP \ -+deplibs_check_method \ -+file_magic_cmd \ -+AR \ -+AR_FLAGS \ -+STRIP \ -+RANLIB \ -+CC \ -+CFLAGS \ -+compiler \ -+lt_cv_sys_global_symbol_pipe \ -+lt_cv_sys_global_symbol_to_cdecl \ -+lt_cv_sys_global_symbol_to_c_name_address \ -+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -+SHELL \ -+ECHO \ -+lt_prog_compiler_no_builtin_flag \ -+lt_prog_compiler_wl \ -+lt_prog_compiler_pic \ -+lt_prog_compiler_static \ -+lt_cv_prog_compiler_c_o \ -+need_locks \ -+DSYMUTIL \ -+NMEDIT \ -+LIPO \ -+OTOOL \ -+OTOOL64 \ -+shrext_cmds \ -+export_dynamic_flag_spec \ -+whole_archive_flag_spec \ -+compiler_needs_object \ -+with_gnu_ld \ -+allow_undefined_flag \ -+no_undefined_flag \ -+hardcode_libdir_flag_spec \ -+hardcode_libdir_flag_spec_ld \ -+hardcode_libdir_separator \ -+fix_srcfile_path \ -+exclude_expsyms \ -+include_expsyms \ -+file_list_spec \ -+variables_saved_for_relink \ -+libname_spec \ -+library_names_spec \ -+soname_spec \ -+finish_eval \ -+old_striplib \ -+striplib \ -+compiler_lib_search_dirs \ -+predep_objects \ -+postdep_objects \ -+predeps \ -+postdeps \ -+compiler_lib_search_path \ -+LD_CXX \ -+compiler_CXX \ -+lt_prog_compiler_no_builtin_flag_CXX \ -+lt_prog_compiler_wl_CXX \ -+lt_prog_compiler_pic_CXX \ -+lt_prog_compiler_static_CXX \ -+lt_cv_prog_compiler_c_o_CXX \ -+export_dynamic_flag_spec_CXX \ -+whole_archive_flag_spec_CXX \ -+compiler_needs_object_CXX \ -+with_gnu_ld_CXX \ -+allow_undefined_flag_CXX \ -+no_undefined_flag_CXX \ -+hardcode_libdir_flag_spec_CXX \ -+hardcode_libdir_flag_spec_ld_CXX \ -+hardcode_libdir_separator_CXX \ -+fix_srcfile_path_CXX \ -+exclude_expsyms_CXX \ -+include_expsyms_CXX \ -+file_list_spec_CXX \ -+compiler_lib_search_dirs_CXX \ -+predep_objects_CXX \ -+postdep_objects_CXX \ -+predeps_CXX \ -+postdeps_CXX \ -+compiler_lib_search_path_CXX; do -+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in -+ *[\\\\\\\`\\"\\\$]*) -+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" -+ ;; -+ *) -+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" -+ ;; -+ esac ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi +done - -- /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent -- from child file descriptors. If the child closes a descriptor -- before it execs or exits, this munges the parent's descriptor -- as well. Test for this by closing stdout in the child. */ -- _exit(close(fileno(stdout)) != 0); -- } else { -- int status; -- struct stat st; -+# Double-quote double-evaled strings. -+for var in reload_cmds \ -+old_postinstall_cmds \ -+old_postuninstall_cmds \ -+old_archive_cmds \ -+extract_expsyms_cmds \ -+old_archive_from_new_cmds \ -+old_archive_from_expsyms_cmds \ -+archive_cmds \ -+archive_expsym_cmds \ -+module_cmds \ -+module_expsym_cmds \ -+export_symbols_cmds \ -+prelink_cmds \ -+postinstall_cmds \ -+postuninstall_cmds \ -+finish_cmds \ -+sys_lib_search_path_spec \ -+sys_lib_dlsearch_path_spec \ -+old_archive_cmds_CXX \ -+old_archive_from_new_cmds_CXX \ -+old_archive_from_expsyms_cmds_CXX \ -+archive_cmds_CXX \ -+archive_expsym_cmds_CXX \ -+module_cmds_CXX \ -+module_expsym_cmds_CXX \ -+export_symbols_cmds_CXX \ -+prelink_cmds_CXX; do -+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in -+ *[\\\\\\\`\\"\\\$]*) -+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" -+ ;; -+ *) -+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" -+ ;; -+ esac ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 ++$as_echo "$ac_ct_STRIP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++fi ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 ++$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } ++if test -z "$MKDIR_P"; then ++ if test "${ac_cv_path_mkdir+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in mkdir gmkdir; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue ++ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( ++ 'mkdir (GNU coreutils) '* | \ ++ 'mkdir (coreutils) '* | \ ++ 'mkdir (fileutils) '4.1*) ++ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext ++ break 3;; ++ esac ++ done ++ done ++ done ++IFS=$as_save_IFS ++ ++fi ++ ++ test -d ./--version && rmdir ./--version ++ if test "${ac_cv_path_mkdir+set}" = set; then ++ MKDIR_P="$ac_cv_path_mkdir -p" ++ else ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for MKDIR_P within a source directory, because that will ++ # break other packages using the cache if that directory is ++ # removed, or if the value is a relative name. ++ MKDIR_P="$ac_install_sh -d" ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 ++$as_echo "$MKDIR_P" >&6; } ++ ++mkdir_p="$MKDIR_P" ++case $mkdir_p in ++ [\\/$]* | ?:[\\/]*) ;; ++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; ++esac ++ ++for ac_prog in gawk mawk nawk awk ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_AWK+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$AWK"; then ++ ac_cv_prog_AWK="$AWK" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AWK="$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi +done ++ done ++IFS=$as_save_IFS -- while (wait(&status) != child) -- ; -- exit( -- /* Was there some problem with vforking? */ -- child < 0 -+# Fix-up fallback echo if it was mangled by the above quoting rules. -+case \$lt_ECHO in -+*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` -+ ;; + fi + fi + AWK=$ac_cv_prog_AWK + if test -n "$AWK"; then +- echo "$as_me:$LINENO: result: $AWK" >&5 +-echo "${ECHO_T}$AWK" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 ++$as_echo "$AWK" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + ++ + test -n "$AWK" && break + done + +-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } ++set x ${MAKE-make} ++ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 + else + cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh + all: +- @echo 'ac_maketemp="$(MAKE)"' ++ @echo '@@@%%%=$(MAKE)=@@@%%%' + _ACEOF +-# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +-if test -n "$ac_maketemp"; then +- eval ac_cv_prog_make_${ac_make}_set=yes +-else +- eval ac_cv_prog_make_${ac_make}_set=no +-fi ++# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; +esac + rm -f conftest.make + fi +-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } + SET_MAKE= + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" + fi -- /* Did the child fail? (This shouldn't happen.) */ -- || status -+ac_aux_dir='$ac_aux_dir' -+xsi_shell='$xsi_shell' -+lt_shell_append='$lt_shell_append' +@@ -1796,12 +3019,14 @@ else + fi + rmdir .tst 2>/dev/null -- /* Did the vfork/compiler bug occur? */ -- || parent != getpid() -+# See if we are running on zsh, and set the options which allow our -+# commands through without removal of \ escapes INIT. -+if test -n "\${ZSH_VERSION+set}" ; then -+ setopt NO_GLOB_SUBST -+fi +-# test to see if srcdir already configured +-if test "`cd $srcdir && pwd`" != "`pwd`" && +- test -f $srcdir/config.status; then +- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} +- { (exit 1); exit 1; }; } ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ am__isrc=' -I$(srcdir)' ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 ++ fi + fi -- /* Did the file descriptor bug occur? */ -- || fstat(fileno(stdout), &st) != 0 -- ); -- } --} --_ACEOF --rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_func_vfork_works=yes --else -- echo "$as_me: program exited with status $ac_status" >&5 --echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 + # test whether we have cygpath +@@ -1844,96 +3069,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru --( exit $ac_status ) --ac_cv_func_vfork_works=no --fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext --fi --fi --echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5 --echo "${ECHO_T}$ac_cv_func_vfork_works" >&6 -+ PACKAGE='$PACKAGE' -+ VERSION='$VERSION' -+ TIMESTAMP='$TIMESTAMP' -+ RM='$RM' -+ ofile='$ofile' -+ + MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} --fi; --if test "x$ac_cv_func_fork_works" = xcross; then -- ac_cv_func_vfork_works=$ac_cv_func_vfork -- { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 --echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} +-install_sh=${install_sh-"$am_aux_dir/install-sh"} +- +-# Installed binaries are usually stripped using `strip' when the user +-# run `make install-strip'. However `strip' might not be the right +-# tool to use in cross-compilation environments, therefore Automake +-# will honor the `STRIP' environment variable to overrule this program. +-if test "$cross_compiling" != no; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +-set dummy ${ac_tool_prefix}strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_STRIP+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$STRIP"; then +- ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +- +-fi -fi - --if test "x$ac_cv_func_vfork_works" = xyes; then - --cat >>confdefs.h <<\_ACEOF --#define HAVE_WORKING_VFORK 1 --_ACEOF - +-STRIP=$ac_cv_prog_STRIP +-if test -n "$STRIP"; then +- echo "$as_me:$LINENO: result: $STRIP" >&5 +-echo "${ECHO_T}$STRIP" >&6 -else - --cat >>confdefs.h <<\_ACEOF --#define vfork fork - _ACEOF - +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 -fi --if test "x$ac_cv_func_fork_works" = xyes; then -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - --cat >>confdefs.h <<\_ACEOF --#define HAVE_WORKING_FORK 1 --_ACEOF -+# Handling of arguments. -+for ac_config_target in $ac_config_targets -+do -+ case $ac_config_target in -+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; -+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; -+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; -+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; -+ "raideng/Makefile") CONFIG_FILES="$CONFIG_FILES raideng/Makefile" ;; -+ "raidutil/Makefile") CONFIG_FILES="$CONFIG_FILES raidutil/Makefile" ;; -+ "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; -+ "distribution/raidutils.spec") CONFIG_FILES="$CONFIG_FILES distribution/raidutils.spec" ;; - +- -fi -+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;; -+ esac -+done - --if test $ac_cv_c_compiler_gnu = yes; then -- echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 --echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6 --if test "${ac_cv_prog_gcc_traditional+set}" = set; then +-if test -z "$ac_cv_prog_STRIP"; then +- ac_ct_STRIP=$STRIP +- # Extract the first word of "strip", so it can be a program name with args. +-set dummy strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else -- ac_pattern="Autoconf.*'x'" -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include --Autoconf TIOCGETP --_ACEOF --if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -- $EGREP "$ac_pattern" >/dev/null 2>&1; then -- ac_cv_prog_gcc_traditional=yes +- if test -n "$ac_ct_STRIP"; then +- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -- ac_cv_prog_gcc_traditional=no -+ -+# If the user did not use the arguments to specify the items to instantiate, -+# then the envvar interface is used. Set only those that are not. -+# We use the long form for the default assignment because of an extremely -+# bizarre bug on SunOS 4.1.3. -+if $ac_need_defaults; then -+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers -+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands - fi --rm -f conftest* - -+# Have a temporary directory for convenience. Make it in the build tree -+# simply because there is no reason against having it here, and in addition, -+# creating and moving files from /tmp can sometimes cause problems. -+# Hook for its removal unless debugging. -+# Note that there is a small window in which the directory will not be cleaned: -+# after its creation but before its name has been assigned to `$tmp'. -+$debug || -+{ -+ tmp= -+ trap 'exit_status=$? -+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -+' 0 -+ trap 'as_fn_exit 1' 1 2 13 15 -+} -+# Create a (secure) tmp directory for tmp files. - -- if test $ac_cv_prog_gcc_traditional = no; then -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include --Autoconf TCGETA --_ACEOF --if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | -- $EGREP "$ac_pattern" >/dev/null 2>&1; then -- ac_cv_prog_gcc_traditional=yes --fi --rm -f conftest* -+{ -+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && -+ test -n "$tmp" && test -d "$tmp" -+} || -+{ -+ tmp=./conf$$-$RANDOM -+ (umask 077 && mkdir "$tmp") -+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 - +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_STRIP="strip" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 - fi +-done +-done +- +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi --echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 --echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6 -- if test $ac_cv_prog_gcc_traditional = yes; then -- CC="$CC -traditional" -- fi -fi -+# Set up the scripts for CONFIG_FILES section. -+# No need to generate them if there are no CONFIG_FILES. -+# This happens for instance with `./config.status config.h'. -+if test -n "$CONFIG_FILES"; then - - --for ac_header in stdlib.h --do --as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 -+ac_cr=`echo X | tr X '\015'` -+# On cygwin, bash can eat \r inside `` if the user requested igncr. -+# But we know of no other shell where ac_cr would be empty at this -+# point, so we can use a bashism as a fallback. -+if test "x$ac_cr" = x; then -+ eval ac_cr=\$\'\\r\' - fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +-if test -n "$ac_ct_STRIP"; then +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-echo "${ECHO_T}$ac_ct_STRIP" >&6 -else -- # Is the header compilable? --echo "$as_me:$LINENO: checking $ac_header usability" >&5 --echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_includes_default --#include <$ac_header> --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_header_compiler=yes -+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then -+ ac_cs_awk_cr='\\r' - else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi - --ac_header_compiler=no -+ ac_cs_awk_cr=$ac_cr - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 --echo "${ECHO_T}$ac_header_compiler" >&6 - --# Is the header present? --echo "$as_me:$LINENO: checking $ac_header presence" >&5 --echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ -+echo 'BEGIN {' >"$tmp/subs1.awk" && - _ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include <$ac_header> --_ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -+ -+ -+{ -+ echo "cat >conf$$subs.awk <<_ACEOF" && -+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && -+ echo "_ACEOF" -+} >conf$$subs.sh || -+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -+ac_delim='%!_!# ' -+for ac_last_try in false false false false false :; do -+ . ./conf$$subs.sh || -+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -+ -+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` -+ if test $ac_delim_n = $ac_delim_num; then -+ break -+ elif $ac_last_try; then -+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else -- ac_cpp_err= -+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi +- STRIP=$ac_ct_STRIP -else -- ac_cpp_err=yes +- STRIP="$ac_cv_prog_STRIP" -fi --if test -z "$ac_cpp_err"; then -- ac_header_preproc=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+done -+rm -f conf$$subs.sh - -- ac_header_preproc=no +- -fi --rm -f conftest.err conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 --echo "${ECHO_T}$ac_header_preproc" >&6 -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+cat >>"\$tmp/subs1.awk" <<\\_ACAWK && -+_ACEOF -+sed -n ' -+h -+s/^/S["/; s/!.*/"]=/ -+p -+g -+s/^[^!]*!// -+:repl -+t repl -+s/'"$ac_delim"'$// -+t delim -+:nl -+h -+s/$.\{148\}$..*/\1/ -+t more1 -+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -+p -+n -+b repl -+:more1 -+s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -+p -+g -+s/.\{148\}// -+t nl -+:delim -+h -+s/$.\{148\}$..*/\1/ -+t more2 -+s/["\\]/\\&/g; s/^/"/; s/$/"/ -+p -+b -+:more2 -+s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -+p -+g -+s/.\{148\}// -+t delim -+' >$CONFIG_STATUS || ac_write_fail=1 -+rm -f conf$$subs.awk -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+_ACAWK -+cat >>"\$tmp/subs1.awk" <<_ACAWK && -+ for (key in S) S_is_set[key] = 1 -+ FS = "" -+ -+} -+{ -+ line = $ 0 -+ nfields = split(line, field, "@") -+ substed = 0 -+ len = length(field[1]) -+ for (i = 2; i < nfields; i++) { -+ key = field[i] -+ keylen = length(key) -+ if (S_is_set[key]) { -+ value = S[key] -+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) -+ len += length(value) + length(field[++i]) -+ substed = 1 -+ } else -+ len += 1 + keylen -+ } +-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +- + # We need awk for the "check" target. The system "awk" is bad on + # some platforms. + # Always define AMTAR for backward compatibility. +@@ -1948,20 +3083,24 @@ am__tar='${AMTAR} chof - "$$tardir"'; am --# So? What about this header? --case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in -- yes:no: ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 --echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} -- ac_header_preproc=yes -- ;; -- no:yes:* ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 --echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 --echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 --echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 --echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 --echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} -- ( -- cat <<\_ASBOX --## --------------------------------------------- ## --## Report this to the I2O RAID Utilities lists. ## --## --------------------------------------------- ## --_ASBOX -- ) | -- sed "s/^/$as_me: WARNING: /" >&2 -- ;; --esac --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- eval "$as_ac_Header=\$ac_header_preproc" --fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+ print line -+} --fi --if test `eval echo '${'$as_ac_Header'}'` = yes; then -- cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -+_ACAWK -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then -+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -+else -+ cat -+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ -+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 - _ACEOF + # Checks for programs. +-ac_ext=cc ++ac_ext=cpp + ac_cpp='$CXXCPP $CPPFLAGS' + ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-if test -n "$ac_tool_prefix"; then +- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ++if test -z "$CXX"; then ++ if test -n "$CCC"; then ++ CXX=$CCC ++ else ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_CXX+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_CXX+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CXX"; then + ac_cv_prog_CXX="$CXX" # Let the user override the test. +@@ -1971,39 +3110,41 @@ for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done ++IFS=$as_save_IFS -+# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -+# trailing colons and then remove the whole line if VPATH becomes empty -+# (actually we leave an empty line to preserve line numbers). -+if test "x$srcdir" = x.; then -+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -+h -+s/// -+s/^/:/ -+s/[ ]*$/:/ -+s/:\$(srcdir):/:/g -+s/:\${srcdir}:/:/g -+s/:@srcdir@:/:/g -+s/^:*// -+s/:*$// -+x -+s/$=[ ]*$.*/\1/ -+G -+s/\n// -+s/^[^=]*=[ ]*$// -+}' + fi + fi + CXX=$ac_cv_prog_CXX + if test -n "$CXX"; then +- echo "$as_me:$LINENO: result: $CXX" >&5 +-echo "${ECHO_T}$CXX" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 ++$as_echo "$CXX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } fi ++ + test -n "$CXX" && break + done + fi + if test -z "$CXX"; then + ac_ct_CXX=$CXX +- for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CXX"; then + ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. +@@ -2013,59 +3154,72 @@ for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CXX="$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done -done -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+fi # test -n "$CONFIG_FILES" ++ done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CXX=$ac_cv_prog_ac_ct_CXX + if test -n "$ac_ct_CXX"; then +- echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 +-echo "${ECHO_T}$ac_ct_CXX" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 ++$as_echo "$ac_ct_CXX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi --echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5 --echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6 --if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test "$cross_compiling" = yes; then -- ac_cv_func_malloc_0_nonnull=no --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#if STDC_HEADERS || HAVE_STDLIB_H --# include --#else --char *malloc (); --#endif -+# Set up the scripts for CONFIG_HEADERS section. -+# No need to generate them if there are no CONFIG_HEADERS. -+# This happens for instance with `./config.status Makefile'. -+if test -n "$CONFIG_HEADERS"; then -+cat >"$tmp/defines.awk" <<\_ACAWK || -+BEGIN { -+_ACEOF -+ -+# Transform confdefs.h into an awk script `defines.awk', embedded as -+# here-document in config.status, that substitutes the proper values into -+# config.h.in to produce config.h. + -+# Create a delimiter string that does not exist in confdefs.h, to ease -+# handling of long lines. -+ac_delim='%!_!# ' -+for ac_last_try in false false :; do -+ ac_t=`sed -n "/$ac_delim/p" confdefs.h` -+ if test -z "$ac_t"; then -+ break -+ elif $ac_last_try; then -+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + test -n "$ac_ct_CXX" && break + done +-test -n "$ac_ct_CXX" || ac_ct_CXX="g++" + +- CXX=$ac_ct_CXX ++ if test "x$ac_ct_CXX" = x; then ++ CXX="g++" + else -+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CXX=$ac_ct_CXX + fi -+done + fi --int --main () --{ --exit (malloc (0) ? 0 : 1); -- ; -- return 0; -+# For the awk script, D is an array of macro values keyed by name, -+# likewise P contains macro parameters if any. Preserve backslash -+# newline sequences. -+ -+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -+sed -n ' -+s/.\{148\}/&'"$ac_delim"'/g -+t rset -+:rset -+s/^[ ]*#[ ]*define[ ][ ]*/ / -+t def -+d -+:def -+s/\\$// -+t bsnl -+s/["\\]/\\&/g -+s/^ $'"$ac_word_re"'$$([^()]*)$[ ]*$.*$/P["\1"]="\2"\ -+D["\1"]=" \3"/p -+s/^ $'"$ac_word_re"'$[ ]*$.*$/D["\1"]=" \2"/p -+d -+:bsnl -+s/["\\]/\\&/g -+s/^ $'"$ac_word_re"'$$([^()]*)$[ ]*$.*$/P["\1"]="\2"\ -+D["\1"]=" \3\\\\\\n"\\/p -+t cont -+s/^ $'"$ac_word_re"'$[ ]*$.*$/D["\1"]=" \2\\\\\\n"\\/p -+t cont -+d -+:cont -+n -+s/.\{148\}/&'"$ac_delim"'/g -+t clear -+:clear -+s/\\$// -+t bsnlc -+s/["\\]/\\&/g; s/^/"/; s/$/"/p -+d -+:bsnlc -+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -+b cont -+' >$CONFIG_STATUS || ac_write_fail=1 -+ -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+ for (key in D) D_is_set[key] = 1 -+ FS = "" -+} -+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { -+ line = \$ 0 -+ split(line, arg, " ") -+ if (arg[1] == "#") { -+ defundef = arg[2] -+ mac1 = arg[3] -+ } else { -+ defundef = substr(arg[1], 2) -+ mac1 = arg[2] -+ } -+ split(mac1, mac2, "(") #) -+ macro = mac2[1] -+ prefix = substr(line, 1, index(line, defundef) - 1) -+ if (D_is_set[macro]) { -+ # Preserve the white space surrounding the "#". -+ print prefix "define", macro P[macro] D[macro] -+ next -+ } else { -+ # Replace #undef with comments. This is necessary, for example, -+ # in the case of _POSIX_SOURCE, which is predefined and required -+ # on some systems where configure will not decide to define it. -+ if (defundef == "undef") { -+ print "/*", prefix defundef, macro, "*/" -+ next -+ } -+ } - } -+{ print } -+_ACAWK - _ACEOF --rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 +- ++ fi ++fi + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C++ compiler version" >&5 +-ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 +- (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_func_malloc_0_nonnull=yes --else -- echo "$as_me: program exited with status $ac_status" >&5 --echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -+fi # test -n "$CONFIG_HEADERS" - --( exit $ac_status ) --ac_cv_func_malloc_0_nonnull=no --fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext --fi --fi --echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5 --echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6 --if test $ac_cv_func_malloc_0_nonnull = yes; then - --cat >>confdefs.h <<\_ACEOF --#define HAVE_MALLOC 1 --_ACEOF -+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -+shift -+for ac_tag -+do -+ case $ac_tag in -+ :[FHLC]) ac_mode=$ac_tag; continue;; -+ esac -+ case $ac_mode$ac_tag in -+ :[FHL]*:*);; -+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;; -+ :[FH]-) ac_tag=-:-;; -+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; -+ esac -+ ac_save_IFS=$IFS -+ IFS=: -+ set x $ac_tag -+ IFS=$ac_save_IFS -+ shift -+ ac_file=$1 -+ shift +- (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 ++set X $ac_compile ++ac_compiler=$2 ++for ac_option in --version -v -V -qversion; do ++ { { ac_try="$ac_compiler $ac_option >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } ++ if test -s conftest.err; then ++ sed '10a\ ++... rest of stderr output deleted ... ++ 10q' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ fi ++ rm -f conftest.er1 conftest.err ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++done --else -- cat >>confdefs.h <<\_ACEOF --#define HAVE_MALLOC 0 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ -_ACEOF -+ case $ac_mode in -+ :L) ac_source=$1;; -+ :[FH]) -+ ac_file_inputs= -+ for ac_f -+ do -+ case $ac_f in -+ -) ac_f="$tmp/stdin";; -+ *) # Look for the file first in the build tree, then in the source tree -+ # (if the path is not absolute). The absolute path cannot be DOS-style, -+ # because $ac_f cannot contain `:'. -+ test -f "$ac_f" || -+ case $ac_f in -+ [\\/$]*) false;; -+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; -+ esac || -+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;; -+ esac -+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac -+ as_fn_append ac_file_inputs " '$ac_f'" -+ done +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ -- case $LIBOBJS in -- "malloc.$ac_objext" | \ -- *" malloc.$ac_objext" | \ -- "malloc.$ac_objext "* | \ -- *" malloc.$ac_objext "* ) ;; -- *) LIBOBJS="$LIBOBJS malloc.$ac_objext" ;; -+ # Let's still pretend it is `configure' which instantiates (i.e., don't -+ # use $as_me), people would be surprised to read: -+ # /* config.h. Generated by config.status. */ -+ configure_input='Generated from '` -+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' -+ `' by configure.' -+ if test x"$ac_file" != x-; then -+ configure_input="$ac_file. $configure_input" -+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -+$as_echo "$as_me: creating $ac_file" >&6;} -+ fi -+ # Neutralize special characters interpreted by sed in replacement strings. -+ case $configure_input in #( -+ *\&* | *\|* | *\\* ) -+ ac_sed_conf_input=`$as_echo "$configure_input" | -+ sed 's/[\\\\&|]/\\\\&/g'`;; #( -+ *) ac_sed_conf_input=$configure_input;; -+ esac + int +@@ -2077,112 +3231,108 @@ main () + } + _ACEOF + ac_clean_files_save=$ac_clean_files +-ac_clean_files="$ac_clean_files a.out a.exe b.out" ++ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-echo "$as_me:$LINENO: checking for C++ compiler default output file name" >&5 +-echo $ECHO_N "checking for C++ compiler default output file name... $ECHO_C" >&6 +-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 +- (eval $ac_link_default) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- # Find the output, starting from the most likely. This scheme is +-# not robust to junk in `.', hence go to wildcards (a.*) only as a last +-# resort. +- +-# Be careful to initialize this variable, since it used to be cached. +-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +-ac_cv_exeext= +-# b.out is created by i960 compilers. +-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C++ compiler works" >&5 ++$as_echo_n "checking whether the C++ compiler works... " >&6; } ++ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + -+ case $ac_tag in -+ *:-:* | *:-) cat >"$tmp/stdin" \ -+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; -+ esac -+ ;; -+ esac ++# The possible output files: ++ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + -+ ac_dir=`$as_dirname -- "$ac_file" || -+$as_expr X"$ac_file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -+ X"$ac_file" : 'X$//$[^/]' \| \ -+ X"$ac_file" : 'X$//$$' \| \ -+ X"$ac_file" : 'X$/$' \| . 2>/dev/null || -+$as_echo X"$ac_file" | -+ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/$.*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ as_dir="$ac_dir"; as_fn_mkdir_p -+ ac_builddir=. ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles + -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) -+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; - esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix - -+case $srcdir in -+ .) # We are building in place. -+ ac_srcdir=. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. -+ ac_srcdir=$srcdir$ac_dir_suffix; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++if { { ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; +esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - --cat >>confdefs.h <<\_ACEOF --#define malloc rpl_malloc --_ACEOF ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link_default") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' + do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) +- ;; +- conftest.$ac_ext ) +- # This is the source file. ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) +- ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'` +- # FIXME: I believe we export ac_cv_exeext for Libtool, +- # but it would be cool to find out if it's true. Does anybody +- # maintain Libtool? --akim. +- export ac_cv_exeext ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. + break;; + * ) + break;; + esac + done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ + else +- echo "$as_me: failed program was:" >&5 ++ ac_file='' ++fi ++if test -z "$ac_file"; then : ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++$as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 +-{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables +-See \`config.log' for more details." >&5 +-echo "$as_me: error: C++ compiler cannot create executables +-See \`config.log' for more details." >&2;} +- { (exit 77); exit 77; }; } ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error 77 "C++ compiler cannot create executables ++See \`config.log' for more details" "$LINENO" 5 ; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } + fi +- ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler default output file name" >&5 ++$as_echo_n "checking for C++ compiler default output file name... " >&6; } ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 ++$as_echo "$ac_file" >&6; } + ac_exeext=$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_file" >&5 +-echo "${ECHO_T}$ac_file" >&6 +- +-# Check the compiler produces executables we can run. If not, either +-# the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5 +-echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6 +-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +-# If not cross compiling, check that we can run a simple program. +-if test "$cross_compiling" != yes; then +- if { ac_try='./$ac_file' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- cross_compiling=no +- else +- if test "$cross_compiling" = maybe; then +- cross_compiling=yes +- else +- { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs. +-If you meant to cross compile, use \`--host'. +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot run C++ compiled programs. +-If you meant to cross compile, use \`--host'. +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +- fi +- fi -fi -+ case $ac_mode in -+ :F) -+ # -+ # CONFIG_FILE -+ # - -+ case $INSTALL in -+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; -+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; -+ esac -+ ac_MKDIR_P=$MKDIR_P -+ case $MKDIR_P in -+ [\\/$]* | ?:[\\/]* ) ;; -+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; -+ esac -+_ACEOF +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+# If the template does not know about datarootdir, expand it. -+# FIXME: This hack should be removed a few years after 2.60. -+ac_datarootdir_hack=; ac_datarootdir_seen= -+ac_sed_dataroot=' -+/datarootdir/ { -+ p -+ q -+} -+/@datadir@/p -+/@docdir@/p -+/@infodir@/p -+/@localedir@/p -+/@mandir@/p' -+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -+*datarootdir*) ac_datarootdir_seen=yes;; -+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+ ac_datarootdir_hack=' -+ s&@datadir@&$datadir&g -+ s&@docdir@&$docdir&g -+ s&@infodir@&$infodir&g -+ s&@localedir@&$localedir&g -+ s&@mandir@&$mandir&g -+ s&\\\${datarootdir}&$datarootdir&g' ;; +-rm -f a.out a.exe conftest$ac_cv_exeext b.out ++rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out + ac_clean_files=$ac_clean_files_save +-# Check the compiler produces executables we can run. If not, either +-# the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $cross_compiling" >&5 +-echo "${ECHO_T}$cross_compiling" >&6 +- +-echo "$as_me:$LINENO: checking for suffix of executables" >&5 +-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 ++$as_echo_n "checking for suffix of executables... " >&6; } ++if { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; +esac -+_ACEOF ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) + # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will + # work properly (i.e., refer to `conftest.exe'), while it won't with +@@ -2190,38 +3340,90 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l + for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'` +- export ac_cv_exeext + break;; + * ) break;; + esac + done + else +- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi +- +-rm -f conftest$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +-echo "${ECHO_T}$ac_cv_exeext" >&6 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot compute suffix of executables: cannot compile and link ++See \`config.log' for more details" "$LINENO" 5 ; } ++fi ++rm -f conftest conftest$ac_cv_exeext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 ++$as_echo "$ac_cv_exeext" >&6; } --echo "$as_me:$LINENO: checking for working memcmp" >&5 --echo $ECHO_N "checking for working memcmp... $ECHO_C" >&6 --if test "${ac_cv_func_memcmp_working+set}" = set; then + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT +-echo "$as_me:$LINENO: checking for suffix of object files" >&5 +-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +-if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else -- if test "$cross_compiling" = yes; then -- ac_cv_func_memcmp_working=no --else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -+# Neutralize VPATH when `$srcdir' = `.'. -+# Shell code in configure.ac might set extrasub. -+# FIXME: do we really want to maintain this feature? -+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -+ac_sed_extra="$ac_vpsub -+$extrasub ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++int ++main () ++{ ++FILE *f = fopen ("conftest.out", "w"); ++ return ferror (f) || fclose (f) != 0; ++ ++ ; ++ return 0; ++} _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_includes_default --int --main () --{ -+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -+:t -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -+s|@configure_input@|$ac_sed_conf_input|;t t -+s&@top_builddir@&$ac_top_builddir_sub&;t t -+s&@top_build_prefix@&$ac_top_build_prefix&;t t -+s&@srcdir@&$ac_srcdir&;t t -+s&@abs_srcdir@&$ac_abs_srcdir&;t t -+s&@top_srcdir@&$ac_top_srcdir&;t t -+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -+s&@builddir@&$ac_builddir&;t t -+s&@abs_builddir@&$ac_abs_builddir&;t t -+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -+s&@INSTALL@&$ac_INSTALL&;t t -+s&@MKDIR_P@&$ac_MKDIR_P&;t t -+$ac_datarootdir_hack -+" -+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ -+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 -+ -+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && -+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && -+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined" >&5 -+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined" >&2;} - -- /* Some versions of memcmp are not 8-bit clean. */ -- char c0 = 0x40, c1 = 0x80, c2 = 0x81; -- if (memcmp(&c0, &c2, 1) >= 0 || memcmp(&c1, &c2, 1) >= 0) -- exit (1); -+ rm -f "$tmp/stdin" -+ case $ac_file in -+ -) cat "$tmp/out" && rm -f "$tmp/out";; -+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; -+ esac \ -+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 -+ ;; -+ :H) -+ # -+ # CONFIG_HEADER -+ # -+ if test x"$ac_file" != x-; then -+ { -+ $as_echo "/* $configure_input */" \ -+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" -+ } >"$tmp/config.h" \ -+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 -+ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -+$as_echo "$as_me: $ac_file is unchanged" >&6;} ++ac_clean_files="$ac_clean_files conftest.out" ++# Check that the compiler produces executables we can run. If not, either ++# the compiler is broken, or we cross compile. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 ++$as_echo_n "checking whether we are cross compiling... " >&6; } ++if test "$cross_compiling" != yes; then ++ { { ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_link") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ if { ac_try='./conftest$ac_cv_exeext' ++ { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then ++ cross_compiling=no ++ else ++ if test "$cross_compiling" = maybe; then ++ cross_compiling=yes + else -+ rm -f "$ac_file" -+ mv "$tmp/config.h" "$ac_file" \ -+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot run C++ compiled programs. ++If you meant to cross compile, use \`--host'. ++See \`config.log' for more details" "$LINENO" 5 ; } + fi -+ else -+ $as_echo "/* $configure_input */" \ -+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ -+ || as_fn_error $? "could not create -" "$LINENO" 5 + fi -+# Compute "$ac_file"'s index in $config_headers. -+_am_arg="$ac_file" -+_am_stamp_count=1 -+for _am_header in $config_headers :; do -+ case $_am_header in -+ $_am_arg | $_am_arg:* ) -+ break ;; -+ * ) -+ _am_stamp_count=`expr $_am_stamp_count + 1` ;; -+ esac -+done -+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -+$as_expr X"$_am_arg" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -+ X"$_am_arg" : 'X$//$[^/]' \| \ -+ X"$_am_arg" : 'X$//$$' \| \ -+ X"$_am_arg" : 'X$/$' \| . 2>/dev/null || -+$as_echo X"$_am_arg" | -+ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/$.*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'`/stamp-h$_am_stamp_count -+ ;; ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 ++$as_echo "$cross_compiling" >&6; } ++ ++rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ++ac_clean_files=$ac_clean_files_save ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 ++$as_echo_n "checking for suffix of object files... " >&6; } ++if test "${ac_cv_objext+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ -- /* The Next x86 OpenStep bug shows up only when comparing 16 bytes -- or more and with at least one buffer not starting on a 4-byte boundary. -- William Lewis provided this test program. */ -- { -- char foo[21]; -- char bar[21]; -- int i; -- for (i = 0; i < 4; i++) -- { -- char *a = foo + i; -- char *b = bar + i; -- strcpy (a, "--------01111111"); -- strcpy (b, "--------10000000"); -- if (memcmp (a, b, 16) >= 0) -- exit (1); -- } -- exit (0); -- } -+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -+$as_echo "$as_me: executing $ac_file commands" >&6;} -+ ;; -+ esac + int +@@ -2233,45 +3435,46 @@ main () + } + _ACEOF + rm -f conftest.o conftest.obj +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do ++if { { ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compile") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then : ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.$.*$'` + break;; + esac + done + else +- echo "$as_me: failed program was:" >&5 ++ $as_echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 -- ; -- return 0; -+ -+ case $ac_file$ac_mode in -+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || { -+ # Autoconf 2.62 quotes --file arguments for eval, but not when files -+ # are listed without --file. Let's play safe and only enable the eval -+ # if we detect the quoting. -+ case $CONFIG_FILES in -+ *\'*) eval set x "$CONFIG_FILES" ;; -+ *) set x $CONFIG_FILES ;; -+ esac -+ shift -+ for mf -+ do -+ # Strip MF so we end up with the name of the file. -+ mf=`echo "$mf" | sed -e 's/:.*$//'` -+ # Check whether this is an Automake generated Makefile or not. -+ # We used to match only the files named `Makefile.in', but -+ # some people rename them; so instead we look at the file content. -+ # Grep'ing the first line is not enough: some people post-process -+ # each Makefile.in and add a new line on top of each file to say so. -+ # Grep'ing the whole file is not good either: AIX grep has a line -+ # limit of 2048, but all sed's we know have understand at least 4000. -+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then -+ dirpart=`$as_dirname -- "$mf" || -+$as_expr X"$mf" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -+ X"$mf" : 'X$//$[^/]' \| \ -+ X"$mf" : 'X$//$$' \| \ -+ X"$mf" : 'X$/$' \| . 2>/dev/null || -+$as_echo X"$mf" | -+ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/$.*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ else -+ continue -+ fi -+ # Extract the definition of DEPDIR, am__include, and am__quote -+ # from the Makefile without running `make'. -+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` -+ test -z "$DEPDIR" && continue -+ am__include=`sed -n 's/^am__include = //p' < "$mf"` -+ test -z "am__include" && continue -+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` -+ # When using ansi2knr, U may be empty or an underscore; expand it -+ U=`sed -n 's/^U = //p' < "$mf"` -+ # Find all dependency output files, they are included files with -+ # $(DEPDIR) in their names. We invoke sed twice because it is the -+ # simplest approach to changing $(DEPDIR) to its actual value in the -+ # expansion. -+ for file in `sed -n " -+ s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \ -+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do -+ # Make sure the directory exists. -+ test -f "$dirpart/$file" && continue -+ fdir=`$as_dirname -- "$file" || -+$as_expr X"$file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -+ X"$file" : 'X$//$[^/]' \| \ -+ X"$file" : 'X$//$$' \| \ -+ X"$file" : 'X$/$' \| . 2>/dev/null || -+$as_echo X"$file" | -+ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X$\/\/$$/{ -+ s//\1/ -+ q -+ } -+ /^X$\/$.*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ as_dir=$dirpart/$fdir; as_fn_mkdir_p -+ # echo "creating $dirpart/$file" -+ echo '# dummy' > "$dirpart/$file" -+ done -+ done +-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +-See \`config.log' for more details." >&5 +-echo "$as_me: error: cannot compute suffix of object files: cannot compile +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "cannot compute suffix of object files: cannot compile ++See \`config.log' for more details" "$LINENO" 5 ; } + fi +- + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +-echo "${ECHO_T}$ac_cv_objext" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 ++$as_echo "$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 +-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 ++$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } ++if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -2285,55 +3488,34 @@ main () + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++if ac_fn_cxx_try_compile "$LINENO"; then : + ac_compiler_gnu=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 +-GXX=`test $ac_compiler_gnu = yes && echo yes` ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 ++$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } ++if test $ac_compiler_gnu = yes; then ++ GXX=yes ++else ++ GXX= ++fi + ac_test_CXXFLAGS=${CXXFLAGS+set} + ac_save_CXXFLAGS=$CXXFLAGS +-CXXFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 +-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 +-if test "${ac_cv_prog_cxx_g+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 ++$as_echo_n "checking whether $CXX accepts -g... " >&6; } ++if test "${ac_cv_prog_cxx_g+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_save_cxx_werror_flag=$ac_cxx_werror_flag ++ ac_cxx_werror_flag=yes ++ ac_cv_prog_cxx_g=no ++ CXXFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -2344,160 +3526,64 @@ main () + return 0; } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_prog_cxx_g=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_prog_cxx_g=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 +-if test "$ac_test_CXXFLAGS" = set; then +- CXXFLAGS=$ac_save_CXXFLAGS +-elif test $ac_cv_prog_cxx_g = yes; then +- if test "$GXX" = yes; then +- CXXFLAGS="-g -O2" +- else +- CXXFLAGS="-g" +- fi +-else +- if test "$GXX" = yes; then +- CXXFLAGS="-O2" +- else +- CXXFLAGS= +- fi +-fi +-for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' +-do +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ -_ACEOF --rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ CXXFLAGS="" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-$ac_declaration +-#include ++ + int + main () + { +-exit (42); ++ + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 - ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -- ac_cv_func_memcmp_working=yes +- : -else -- echo "$as_me: program exited with status $ac_status" >&5 --echo "$as_me: failed program was:" >&5 +- echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -+ ;; -+ "libtool":C) ++if ac_fn_cxx_try_compile "$LINENO"; then : --( exit $ac_status ) --ac_cv_func_memcmp_working=no --fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +-continue -fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++else ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++ CXXFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-$ac_declaration ++ + int + main () + { +-exit (42); ++ + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- ++if ac_fn_cxx_try_compile "$LINENO"; then : ++ ac_cv_prog_cxx_g=yes + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 ++$as_echo "$ac_cv_prog_cxx_g" >&6; } ++if test "$ac_test_CXXFLAGS" = set; then ++ CXXFLAGS=$ac_save_CXXFLAGS ++elif test $ac_cv_prog_cxx_g = yes; then ++ if test "$GXX" = yes; then ++ CXXFLAGS="-g -O2" ++ else ++ CXXFLAGS="-g" ++ fi ++else ++ if test "$GXX" = yes; then ++ CXXFLAGS="-O2" ++ else ++ CXXFLAGS= ++ fi + fi +- + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -2505,60 +3591,58 @@ ac_link='$CC -o conftest$ac_exeext $CFLA + ac_compiler_gnu=$ac_cv_c_compiler_gnu + DEPDIR="${am__leading_dot}deps" + +- ac_config_commands="$ac_config_commands depfiles" ++ac_config_commands="$ac_config_commands depfiles" + + + am_make=${MAKE-make} + cat > confinc << 'END' + am__doit: +- @echo done ++ @echo this is the am__doit target + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. +-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 ++$as_echo_n "checking for style of include used by $am_make... " >&6; } + am__include="#" + am__quote= + _am_result=none + # First try GNU make style include. + echo "include confinc" > confmf +-# We grep out `Entering directory' and `Leaving directory' +-# messages which can occur if `w' ends up in MAKEFLAGS. +-# In particular we don't look at `^make:' because GNU make might +-# be invoked under some other name (usually "gmake"), in which +-# case it prints its new name instead of `make'. +-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then +- am__include=include +- am__quote= +- _am_result=GNU -fi --echo "$as_me:$LINENO: result: $ac_cv_func_memcmp_working" >&5 --echo "${ECHO_T}$ac_cv_func_memcmp_working" >&6 --test $ac_cv_func_memcmp_working = no && case $LIBOBJS in -- "memcmp.$ac_objext" | \ -- *" memcmp.$ac_objext" | \ -- "memcmp.$ac_objext "* | \ -- *" memcmp.$ac_objext "* ) ;; -- *) LIBOBJS="$LIBOBJS memcmp.$ac_objext" ;; --esac -+ # See if we are running on zsh, and set the options which allow our -+ # commands through without removal of \ escapes. -+ if test -n "${ZSH_VERSION+set}" ; then -+ setopt NO_GLOB_SUBST -+ fi ++# Ignore all kinds of additional output from `make'. ++case `$am_make -s -f confmf 2> /dev/null` in #( ++*the\ am__doit\ target*) ++ am__include=include ++ am__quote= ++ _am_result=GNU ++ ;; ++esac + # Now try BSD make style include. + if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf +- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then +- am__include=.include +- am__quote="\"" +- _am_result=BSD +- fi ++ case `$am_make -s -f confmf 2> /dev/null` in #( ++ *the\ am__doit\ target*) ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ ;; ++ esac + fi + + +-echo "$as_me:$LINENO: result: $_am_result" >&5 +-echo "${ECHO_T}$_am_result" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 ++$as_echo "$_am_result" >&6; } + rm -f confinc confmf + +-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. +-if test "${enable_dependency_tracking+set}" = set; then +- enableval="$enable_dependency_tracking" ++# Check whether --enable-dependency-tracking was given. ++if test "${enable_dependency_tracking+set}" = set; then : ++ enableval=$enable_dependency_tracking; ++fi + +-fi; + if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + fi +- +- +-if test "x$enable_dependency_tracking" != xno; then ++ if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' + else +@@ -2568,13 +3652,12 @@ fi + + + +- + depcc="$CXX" am_compiler_list= + +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 +-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 ++$as_echo_n "checking dependency style of $depcc... " >&6; } ++if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up +@@ -2599,6 +3682,11 @@ else + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*$[a-zA-Z0-9]*$)$/\1/p' < ./depcomp` + fi ++ am__universal=false ++ case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac ++ + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and +@@ -2616,7 +3704,17 @@ else + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" + case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested +@@ -2626,18 +3724,23 @@ else + break + fi + ;; ++ msvisualcpp | msvcmsys) ++ # This compiler won't grok `-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; + none) break ;; + esac +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. + if depmode=$depmode \ +- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message +@@ -2661,13 +3764,11 @@ else + fi + + fi +-echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 +-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 ++$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } + CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + +- +- +-if ++ if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then + am__fastdepCXX_TRUE= +@@ -2686,10 +3787,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -2699,35 +3800,37 @@ for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -2737,39 +3840,50 @@ for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done ++IFS=$as_save_IFS -+ cfgfile="${ofile}T" -+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 -+ $RM "$cfgfile" + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi -+ cat <<_LT_EOF >> "$cfgfile" -+#! $SHELL +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + else + CC="$ac_cv_prog_CC" + fi --for ac_header in stdlib.h --do --as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then + if test -z "$CC"; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -2779,77 +3893,37 @@ for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 -fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +- +-fi +-if test -z "$ac_cv_prog_CC"; then +- ac_ct_CC=$CC +- # Extract the first word of "cc", so it can be a program name with args. +-set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 -else -- # Is the header compilable? --echo "$as_me:$LINENO: checking $ac_header usability" >&5 --echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_includes_default --#include <$ac_header> --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_header_compiler=yes +- if test -n "$ac_ct_CC"; then +- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -+# NOTE: Changes made to this file will be lost: look at ltmain.sh. -+# -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -+# 2006, 2007, 2008 Free Software Foundation, Inc. -+# Written by Gordon Matzigkeit, 1996 -+# -+# This file is part of GNU Libtool. -+# -+# GNU Libtool is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# As a special exception to the GNU General Public License, -+# if you distribute this file as part of a program or library that -+# is built using GNU Libtool, you may include this file under the -+# same distribution terms that you use for the rest of that program. -+# -+# GNU Libtool is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with GNU Libtool; see the file COPYING. If not, a copy -+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -+# obtained by writing to the Free Software Foundation, Inc., -+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - --ac_header_compiler=no --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 --echo "${ECHO_T}$ac_header_compiler" >&6 - --# Is the header present? --echo "$as_me:$LINENO: checking $ac_header presence" >&5 --echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 --cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include <$ac_header> --_ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 - fi --else -- ac_cpp_err=yes +-done +-done +- -fi --if test -z "$ac_cpp_err"; then -- ac_header_preproc=yes --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+# The names of the tagged configurations supported by this script. -+available_tags="CXX " - -- ac_header_preproc=no -fi --rm -f conftest.err conftest.$ac_ext --echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 --echo "${ECHO_T}$ac_header_preproc" >&6 -+# ### BEGIN LIBTOOL CONFIG +-ac_ct_CC=$ac_cv_prog_ac_ct_CC +-if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi --# So? What about this header? --case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in -- yes:no: ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 --echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} -- ac_header_preproc=yes -- ;; -- no:yes:* ) -- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 --echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 --echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 --echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 --echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 --echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} -- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 --echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} -- ( -- cat <<\_ASBOX --## --------------------------------------------- ## --## Report this to the I2O RAID Utilities lists. ## --## --------------------------------------------- ## --_ASBOX -- ) | -- sed "s/^/$as_me: WARNING: /" >&2 -- ;; --esac --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 +- CC=$ac_ct_CC -else -- eval "$as_ac_Header=\$ac_header_preproc" +- CC="$ac_cv_prog_CC" -fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+# Which release of libtool.m4 was used? -+macro_version=$macro_version -+macro_revision=$macro_revision --fi --if test `eval echo '${'$as_ac_Header'}'` = yes; then -- cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 --_ACEOF -+# Whether or not to build shared libraries. -+build_libtool_libs=$enable_shared ++ fi + fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -2860,18 +3934,19 @@ for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done ++IFS=$as_save_IFS --fi -+# Whether or not to build static libraries. -+build_old_libs=$enable_static + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. +@@ -2889,24 +3964,25 @@ fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + ++ + fi + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -2916,39 +3992,41 @@ for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 ++$as_echo "$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi ++ + test -n "$CC" && break + done + fi + if test -z "$CC"; then + ac_ct_CC=$CC +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -2958,71 +4036,83 @@ for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done -done -+# What type of objects to build. -+pic_mode=$pic_mode ++ done ++IFS=$as_save_IFS --echo "$as_me:$LINENO: checking for GNU libc compatible realloc" >&5 --echo $ECHO_N "checking for GNU libc compatible realloc... $ECHO_C" >&6 --if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 ++$as_echo "$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + ++ + test -n "$ac_ct_CC" && break + done + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + fi + + fi + + +-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +-See \`config.log' for more details." >&5 +-echo "$as_me: error: no acceptable C compiler found in \$PATH +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "no acceptable C compiler found in \$PATH ++See \`config.log' for more details" "$LINENO" 5 ; } + + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C compiler version" >&5 +-ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 ++set X $ac_compile ++ac_compiler=$2 ++for ac_option in --version -v -V -qversion; do ++ { { ac_try="$ac_compiler $ac_option >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- +-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +-if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test "$cross_compiling" = yes; then -- ac_cv_func_realloc_0_nonnull=no --else ++ if test -s conftest.err; then ++ sed '10a\ ++... rest of stderr output deleted ... ++ 10q' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ fi ++ rm -f conftest.er1 conftest.err ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++done ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 ++$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } ++if test "${ac_cv_c_compiler_gnu+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#if STDC_HEADERS || HAVE_STDLIB_H --# include --#else --char *realloc (); --#endif -+# Whether or not to optimize for fast installation. -+fast_install=$enable_fast_install ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ --int --main () --{ --exit (realloc (0, 0) ? 0 : 1); -- ; -- return 0; --} --_ACEOF --rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 + int +@@ -3036,55 +4126,34 @@ main () + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 - ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -- ac_cv_func_realloc_0_nonnull=yes --else -- echo "$as_me: program exited with status $ac_status" >&5 --echo "$as_me: failed program was:" >&5 ++if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes + else +- echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -+# The host system. -+host_alias=$host_alias -+host=$host -+host_os=$host_os - --( exit $ac_status ) --ac_cv_func_realloc_0_nonnull=no --fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext --fi --fi --echo "$as_me:$LINENO: result: $ac_cv_func_realloc_0_nonnull" >&5 --echo "${ECHO_T}$ac_cv_func_realloc_0_nonnull" >&6 --if test $ac_cv_func_realloc_0_nonnull = yes; then -+# The build system. -+build_alias=$build_alias -+build=$build -+build_os=$build_os - --cat >>confdefs.h <<\_ACEOF --#define HAVE_REALLOC 1 --_ACEOF -+# A sed program that does not truncate output. -+SED=$lt_SED - --else -- cat >>confdefs.h <<\_ACEOF --#define HAVE_REALLOC 0 --_ACEOF -+# Sed that helps us avoid accidentally triggering echo(1) options like -n. -+Xsed="\$SED -e 1s/^X//" - -- case $LIBOBJS in -- "realloc.$ac_objext" | \ -- *" realloc.$ac_objext" | \ -- "realloc.$ac_objext "* | \ -- *" realloc.$ac_objext "* ) ;; -- *) LIBOBJS="$LIBOBJS realloc.$ac_objext" ;; --esac -+# A grep program that handles long lines. -+GREP=$lt_GREP - -+# An ERE matcher. -+EGREP=$lt_EGREP - --cat >>confdefs.h <<\_ACEOF --#define realloc rpl_realloc --_ACEOF -+# A literal string matcher. -+FGREP=$lt_FGREP - --fi -+# A BSD- or MS-compatible name lister. -+NM=$lt_NM - -+# Whether we need soft or hard links. -+LN_S=$lt_LN_S - -+# What is the maximum length of a command? -+max_cmd_len=$max_cmd_len +- +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu --echo "$as_me:$LINENO: checking return type of signal handlers" >&5 --echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6 --if test "${ac_cv_type_signal+set}" = set; then + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +-GCC=`test $ac_compiler_gnu = yes && echo yes` ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 ++$as_echo "$ac_cv_c_compiler_gnu" >&6; } ++if test $ac_compiler_gnu = yes; then ++ GCC=yes ++else ++ GCC= ++fi + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-CFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +-if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF @@ -66286,28 +35868,23 @@ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --#include --#include --#ifdef signal --# undef signal --#endif --#ifdef __cplusplus --extern "C" void (*signal (int, void (*)(int)))(int); --#else --void (*signal ()) (); --#endif -+# Object file suffix (normally "o"). -+objext=$ac_objext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 ++$as_echo_n "checking whether $CC accepts -g... " >&6; } ++if test "${ac_cv_prog_cc_g+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ --int --main () --{ --int i; -- ; -- return 0; --} --_ACEOF + int +@@ -3095,39 +4164,49 @@ main () + return 0; + } + _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 @@ -66330,291 +35907,240 @@ - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -- ac_cv_type_signal=void --else ++if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes + else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -+# Executable file suffix (normally ""). -+exeext=$exeext ++ CFLAGS="" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ++else ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++ ++int ++main () ++{ --ac_cv_type_signal=int --fi +-ac_cv_prog_cc_g=no ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_prog_cc_g=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 --echo "${ECHO_T}$ac_cv_type_signal" >&6 -+# whether the shell understands "unset". -+lt_unset=$lt_unset - --cat >>confdefs.h <<_ACEOF --#define RETSIGTYPE $ac_cv_type_signal --_ACEOF -+# turn spaces into newlines. -+SP2NL=$lt_lt_SP2NL - -+# turn newlines into spaces. -+NL2SP=$lt_lt_NL2SP - --echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5 --echo $ECHO_N "checking whether lstat dereferences a symlink specified with a trailing slash... $ECHO_C" >&6 --if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 ++$as_echo "$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -3143,18 +4222,14 @@ else + CFLAGS= + fi + fi +-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +-if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- rm -f conftest.sym conftest.file --echo >conftest.file --if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then -- if test "$cross_compiling" = yes; then -- ac_cv_func_lstat_dereferences_slashed_symlink=no --else -- cat >conftest.$ac_ext <<_ACEOF ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 ++$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- ac_cv_prog_cc_stdc=no ++ ac_cv_prog_cc_c89=no + ac_save_CC=$CC +-cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_includes_default --int --main () --{ --struct stat sbuf; -- /* Linux will dereference the symlink and fail. -- That is better in the sense that it means we will not -- have to compile and use the lstat wrapper. */ -- exit (lstat ("conftest.sym/", &sbuf) ? 0 : 1); -- ; -- return 0; --} --_ACEOF --rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + #include +@@ -3182,12 +4257,17 @@ static char *f (char * (*g) (char **, in + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated +- as 'x'. The following induces an error, until -std1 is added to get ++ as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something +- that's true only with -std1. */ ++ that's true only with -std. */ + int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ + int test (int i, double x); + struct s1 {int (*f) (int a);}; + struct s2 {int (*f) (double a);}; +@@ -3202,205 +4282,37 @@ return f (e, argv, 0) != argv[0] || f + return 0; + } + _ACEOF +-# Don't try gcc -ansi; that turns off useful extensions and +-# breaks some systems' header files. +-# AIX -qlanglvl=ansi +-# Ultrix and OSF/1 -std1 +-# HP-UX 10.20 and later -Ae +-# HP-UX older versions -Aa -D_HPUX_SOURCE +-# SVR4 -Xc -D__EXTENSIONS__ +-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" +- rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 - ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -- ac_cv_func_lstat_dereferences_slashed_symlink=yes +- ac_cv_prog_cc_stdc=$ac_arg +-break -else -- echo "$as_me: program exited with status $ac_status" >&5 --echo "$as_me: failed program was:" >&5 +- echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -+# How to create reloadable object files. -+reload_flag=$lt_reload_flag -+reload_cmds=$lt_reload_cmds - --( exit $ac_status ) --ac_cv_func_lstat_dereferences_slashed_symlink=no --fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext --fi --else -- # If the `ln -s' command failed, then we probably don't even -- # have an lstat function. -- ac_cv_func_lstat_dereferences_slashed_symlink=no --fi --rm -f conftest.sym conftest.file -+# An object symbol dumper. -+OBJDUMP=$lt_OBJDUMP - --fi --echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 --echo "${ECHO_T}$ac_cv_func_lstat_dereferences_slashed_symlink" >&6 -+# Method to check whether dependent libraries are shared objects. -+deplibs_check_method=$lt_deplibs_check_method - --test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && -+# Command to use when deplibs_check_method == "file_magic". -+file_magic_cmd=$lt_file_magic_cmd - --cat >>confdefs.h <<_ACEOF --#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 --_ACEOF -+# The archiver. -+AR=$lt_AR -+AR_FLAGS=$lt_AR_FLAGS - -+# A symbol stripping program. -+STRIP=$lt_STRIP - --if test $ac_cv_func_lstat_dereferences_slashed_symlink = no; then -- case $LIBOBJS in -- "lstat.$ac_objext" | \ -- *" lstat.$ac_objext" | \ -- "lstat.$ac_objext "* | \ -- *" lstat.$ac_objext "* ) ;; -- *) LIBOBJS="$LIBOBJS lstat.$ac_objext" ;; --esac -+# Commands used to install an old-style archive. -+RANLIB=$lt_RANLIB -+old_postinstall_cmds=$lt_old_postinstall_cmds -+old_postuninstall_cmds=$lt_old_postuninstall_cmds - --fi -+# A C compiler. -+LTCC=$lt_CC +- ++ if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_prog_cc_c89=$ac_arg + fi +-rm -f conftest.err conftest.$ac_objext ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break + done +-rm -f conftest.$ac_ext conftest.$ac_objext ++rm -f conftest.$ac_ext + CC=$ac_save_CC --echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5 --echo $ECHO_N "checking whether stat accepts an empty string... $ECHO_C" >&6 --if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test "$cross_compiling" = yes; then -- ac_cv_func_stat_empty_string_bug=yes --else -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_includes_default --int --main () --{ --struct stat sbuf; -- exit (stat ("", &sbuf) ? 1 : 0); -- ; -- return 0; --} + fi +- +-case "x$ac_cv_prog_cc_stdc" in +- x|xno) +- echo "$as_me:$LINENO: result: none needed" >&5 +-echo "${ECHO_T}none needed" >&6 ;; ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 ++$as_echo "none needed" >&6; } ;; ++ xno) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 ++$as_echo "unsupported" >&6; } ;; + *) +- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 +- CC="$CC $ac_cv_prog_cc_stdc" ;; ++ CC="$CC $ac_cv_prog_cc_c89" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 ++$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; + esac ++if test "x$ac_cv_prog_cc_c89" != xno; then : + +-# Some people use a C++ compiler to compile C. Since we use `exit', +-# in C++ we need to declare it. In case someone uses the same compiler +-# for both compiling C and C++ we need to have the C++ compiler decide +-# the declaration of exit, since it's the most demanding environment. +-cat >conftest.$ac_ext <<_ACEOF +-#ifndef __cplusplus +- choke me +-#endif -_ACEOF --rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 - ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -- ac_cv_func_stat_empty_string_bug=yes --else -- echo "$as_me: program exited with status $ac_status" >&5 --echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -+# LTCC compiler flags. -+LTCFLAGS=$lt_CFLAGS - --( exit $ac_status ) --ac_cv_func_stat_empty_string_bug=no --fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext --fi --fi --echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5 --echo "${ECHO_T}$ac_cv_func_stat_empty_string_bug" >&6 --if test $ac_cv_func_stat_empty_string_bug = yes; then -- case $LIBOBJS in -- "stat.$ac_objext" | \ -- *" stat.$ac_objext" | \ -- "stat.$ac_objext "* | \ -- *" stat.$ac_objext "* ) ;; -- *) LIBOBJS="$LIBOBJS stat.$ac_objext" ;; --esac -+# Take the output of nm and produce a listing of raw symbols and C names. -+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -+# Transform the output of nm in a proper C declaration. -+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - --cat >>confdefs.h <<_ACEOF --#define HAVE_STAT_EMPTY_STRING_BUG 1 --_ACEOF -+# Transform the output of nm in a C name address pair. -+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - --fi -+# Transform the output of nm in a C name address pair when lib prefix is needed. -+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -+# The name of the directory that contains temporary libtool files. -+objdir=$objdir - --for ac_func in vprintf +- for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' -do --as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` --echo "$as_me:$LINENO: checking for $ac_func" >&5 --echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 --if eval "test \"\${$as_ac_var+set}\" = set"; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ --/* Define $ac_func to an innocuous variant, in case declares $ac_func. -- For example, HP-UX 11i declares gettimeofday. */ --#define $ac_func innocuous_$ac_func -+# Shell to use when invoking shell scripts. -+SHELL=$lt_SHELL - --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char $ac_func (); below. -- Prefer to if __STDC__ is defined, since -- exists even on freestanding compilers. */ -+# An echo program that does not interpret backslashes. -+ECHO=$lt_ECHO - --#ifdef __STDC__ --# include --#else --# include --#endif -+# Used to examine libraries when file_magic_cmd begins with "file". -+MAGIC_CMD=$MAGIC_CMD -+ -+# Must we lock files when doing compilation? -+need_locks=$lt_need_locks -+ -+# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -+DSYMUTIL=$lt_DSYMUTIL -+ -+# Tool to change global to local symbols on Mac OS X. -+NMEDIT=$lt_NMEDIT - --#undef $ac_func -+# Tool to manipulate fat objects and archives on Mac OS X. -+LIPO=$lt_LIPO - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --{ --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char $ac_func (); --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub_$ac_func) || defined (__stub___$ac_func) --choke me --#else --char (*f) () = $ac_func; --#endif --#ifdef __cplusplus --} --#endif -+# ldd/readelf like tool for Mach-O binaries on Mac OS X. -+OTOOL=$lt_OTOOL - +-$ac_declaration +-#include -int -main () -{ --return f != $ac_func; +-exit (42); - ; - return 0; -} -_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 @@ -66628,103 +36154,38 @@ - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' +- { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -- eval "$as_ac_var=yes" +- : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -+OTOOL64=$lt_OTOOL64 - --eval "$as_ac_var=no" --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext +- +-continue -fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 --if test `eval echo '${'$as_ac_var'}'` = yes; then -- cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 --_ACEOF -+# Old archive suffix (normally "a"). -+libext=$libext - --echo "$as_me:$LINENO: checking for _doprnt" >&5 --echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6 --if test "${ac_cv_func__doprnt+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ --/* Define _doprnt to an innocuous variant, in case declares _doprnt. -- For example, HP-UX 11i declares gettimeofday. */ --#define _doprnt innocuous__doprnt -+# Shared library suffix (normally ".so"). -+shrext_cmds=$lt_shrext_cmds - --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char _doprnt (); below. -- Prefer to if __STDC__ is defined, since -- exists even on freestanding compilers. */ -+# The commands to extract the exported symbol list from a shared archive. -+extract_expsyms_cmds=$lt_extract_expsyms_cmds - --#ifdef __STDC__ --# include --#else --# include --#endif -+# Variables whose values should be saved in libtool wrapper scripts and -+# restored at link time. -+variables_saved_for_relink=$lt_variables_saved_for_relink - --#undef _doprnt -+# Do we need the "lib" prefix for modules? -+need_lib_prefix=$need_lib_prefix - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --{ --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char _doprnt (); --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub__doprnt) || defined (__stub____doprnt) --choke me --#else --char (*f) () = _doprnt; --#endif --#ifdef __cplusplus --} --#endif -+# Do we need a version for libraries? -+need_version=$need_version - +-$ac_declaration -int -main () -{ --return f != _doprnt; +-exit (42); - ; - return 0; -} -_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 @@ -66738,10795 +36199,32757 @@ - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' +- { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -- ac_cv_func__doprnt=yes +- break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -+# Library versioning type. -+version_type=$version_type - --ac_cv_func__doprnt=no --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5 --echo "${ECHO_T}$ac_cv_func__doprnt" >&6 --if test $ac_cv_func__doprnt = yes; then -+# Shared library runtime path variable. -+runpath_var=$runpath_var - --cat >>confdefs.h <<\_ACEOF --#define HAVE_DOPRNT 1 --_ACEOF -+# Shared library path variable. -+shlibpath_var=$shlibpath_var - --fi -+# Is shlibpath searched before the hard-coded library search path? -+shlibpath_overrides_runpath=$shlibpath_overrides_runpath - +- -fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -+# Format of library name prefix. -+libname_spec=$lt_libname_spec - -+# List of archive names. First name is the real one, the rest are links. -+# The last name is the one that the linker finds with -lNAME -+library_names_spec=$lt_library_names_spec - -+# The coded name of the library, if different from the real name. -+soname_spec=$lt_soname_spec - -+# Command to use after installation of a shared archive. -+postinstall_cmds=$lt_postinstall_cmds - -+# Command to use after uninstallation of a shared archive. -+postuninstall_cmds=$lt_postuninstall_cmds - -+# Commands used to finish a libtool library installation in a directory. -+finish_cmds=$lt_finish_cmds - -+# As "finish_cmds", except a single script fragment to be evaled but -+# not shown. -+finish_eval=$lt_finish_eval - -+# Whether we should hardcode library paths into libraries. -+hardcode_into_libs=$hardcode_into_libs - -+# Compile-time system search path for libraries. -+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -+# Run-time system search path for libraries. -+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -+# Whether dlopen is supported. -+dlopen_support=$enable_dlopen +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h + fi -+# Whether dlopen of programs is supported. -+dlopen_self=$enable_dlopen_self +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -3409,10 +4321,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu -+# Whether dlopen of statically linked programs is supported. -+dlopen_self_static=$enable_dlopen_self_static + depcc="$CC" am_compiler_list= -+# Commands to strip libraries. -+old_striplib=$lt_old_striplib -+striplib=$lt_striplib +-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 +-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 ++$as_echo_n "checking dependency style of $depcc... " >&6; } ++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up +@@ -3437,6 +4349,11 @@ else + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*$[a-zA-Z0-9]*$)$/\1/p' < ./depcomp` + fi ++ am__universal=false ++ case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac ++ + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and +@@ -3454,7 +4371,17 @@ else + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" + case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested +@@ -3464,18 +4391,23 @@ else + break + fi + ;; ++ msvisualcpp | msvcmsys) ++ # This compiler won't grok `-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; + none) break ;; + esac +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. + if depmode=$depmode \ +- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message +@@ -3499,13 +4431,11 @@ else + fi -+# The linker used to build libraries. -+LD=$lt_LD + fi +-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 ++$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type --for ac_func in alarm atexit dup2 memset strchr strcspn strpbrk strrchr strspn strstr strtol strtoul sysinfo uname --do --as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` --echo "$as_me:$LINENO: checking for $ac_func" >&5 --echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 --if eval "test \"\${$as_ac_var+set}\" = set"; then +- +- +-if ++ if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= +@@ -3521,15 +4451,15 @@ ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 ++$as_echo_n "checking how to run the C preprocessor... " >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= + fi + if test -z "$CPP"; then +- if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 --else ++ if test "${ac_cv_prog_CPP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" +@@ -3543,11 +4473,7 @@ do + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --/* Define $ac_func to an innocuous variant, in case declares $ac_func. -- For example, HP-UX 11i declares gettimeofday. */ --#define $ac_func innocuous_$ac_func -+# Commands used to build an old-style archive. -+old_archive_cmds=$lt_old_archive_cmds - --/* System header to define __stub macros and hopefully few prototypes, -- which can conflict with char $ac_func (); below. -- Prefer to if __STDC__ is defined, since -- exists even on freestanding compilers. */ -+# A language specific compiler. -+CC=$lt_compiler - --#ifdef __STDC__ --# include --#else --# include --#endif -+# Is the compiler the GNU compiler? -+with_gcc=$GCC - --#undef $ac_func -+# Compiler flag to turn off builtin functions. -+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - --/* Override any gcc2 internal prototype to avoid an error. */ --#ifdef __cplusplus --extern "C" --{ --#endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ --char $ac_func (); --/* The GNU C library defines this for functions which it implements -- to always fail with ENOSYS. Some functions are actually named -- something starting with __ and the normal name is an alias. */ --#if defined (__stub_$ac_func) || defined (__stub___$ac_func) --choke me --#else --char (*f) () = $ac_func; --#endif --#ifdef __cplusplus --} --#endif -+# How to pass a linker flag through the compiler. -+wl=$lt_lt_prog_compiler_wl - --int --main () --{ --return f != $ac_func; -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #ifdef __STDC__ + # include +@@ -3556,78 +4482,34 @@ cat >>conftest.$ac_ext <<_ACEOF + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- eval "$as_ac_var=yes" +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then +- : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -+# Additional compiler flags for building library objects. -+pic_flag=$lt_lt_prog_compiler_pic - --eval "$as_ac_var=no" --fi --rm -f conftest.err conftest.$ac_objext \ -- conftest$ac_exeext conftest.$ac_ext --fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 --if test `eval echo '${'$as_ac_var'}'` = yes; then -- cat >>confdefs.h <<_ACEOF --#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 --_ACEOF -+# Compiler flag to prevent dynamic linking. -+link_static_flag=$lt_lt_prog_compiler_static - --fi --done -+# Does compiler simultaneously support -c and -o options? -+compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -+# Whether or not to add -lc for building shared libraries. -+build_libtool_need_lc=$archive_cmds_need_lc - -- ac_config_files="$ac_config_files Makefile raideng/Makefile raidutil/Makefile lib/Makefile distribution/raidutils.spec" -+# Whether or not to disallow shared libs when runtime libs are static. -+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes ++if ac_fn_c_try_cpp "$LINENO"; then : --cat >confcache <<\_ACEOF --# This file is a shell script that caches the results of configure --# tests run on this system so they can be shared between configure --# scripts and configure runs, see configure's option --config-cache. --# It is not useful on other systems. If it contains results you don't --# want to keep, you may remove or edit it. --# --# config.status only pays attention to the cache file if you give it --# the --recheck option to rerun configure. --# --# `ac_cv_env_foo' variables (set or unset) will be overridden when --# loading this file, other *unset* `ac_cv_foo' will be assigned the --# following values. -+# Compiler flag to allow reflexive dlopens. -+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++else + # Broken: fails on valid input. + continue + fi +-rm -f conftest.err conftest.$ac_ext ++rm -f conftest.err conftest.i conftest.$ac_ext +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ -_ACEOF -+# Compiler flag to generate shared objects directly from archives. -+whole_archive_flag_spec=$lt_whole_archive_flag_spec - --# The following way of writing the cache mishandles newlines in values, --# but we know of no workaround that is simple, portable, and efficient. --# So, don't put newlines in cache variables' values. --# Ultrix sh set writes to stderr and can't be redirected directly, --# and sets the high bit in the cache file unless we assign to the vars. --{ -- (set) 2>&1 | -- case `(ac_space=' '; set | grep ac_space) 2>&1` in -- *ac_space=\ *) -- # `set' does not quote correctly, so add quotes (double-quote -- # substitution turns \\\\ into \\, and sed turns \\ into \). -- sed -n \ -- "s/'/'\\\\''/g; -- s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='\\2'/p" -- ;; -- *) -- # `set' quotes correctly as required by POSIX, so do not add quotes. -- sed -n \ -- "s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1=\\2/p" -- ;; -- esac; --} | -- sed ' -- t clear -- : clear -- s/^$[^=]*$=$.*[{}].*$$/test "${\1+set}" = set || &/ -- t end -- /^ac_cv_env/!s/^$[^=]*$=$.*$$/\1=${\1=\2}/ -- : end' >>confcache --if diff $cache_file confcache >/dev/null 2>&1; then :; else -- if test -w $cache_file; then -- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" -- cat confcache >$cache_file +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else -- echo "not updating unwritable cache $cache_file" +- ac_cpp_err= - fi +-else +- ac_cpp_err=yes -fi --rm -f confcache -+# Whether the compiler copes with passing no objects directly. -+compiler_needs_object=$lt_compiler_needs_object - --test "x$prefix" = xNONE && prefix=$ac_default_prefix --# Let make expand exec_prefix. --test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -+# Create an old-style archive from a shared archive. -+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - --# VPATH may cause trouble with some makes, so we remove $(srcdir), --# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and --# trailing colons and then remove the whole line if VPATH becomes empty --# (actually we leave an empty line to preserve line numbers). --if test "x$srcdir" = x.; then -- ac_vpsub='/^[ ]*VPATH[ ]*=/{ --s/:*\$(srcdir):*/:/; --s/:*\${srcdir}:*/:/; --s/:*@srcdir@:*/:/; --s/^$[^=]*=[ ]*$:*/\1/; --s/:*$//; --s/^[^=]*=[ ]*$//; --}' --fi -+# Create a temporary old-style archive to link instead of a shared archive. -+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - --DEFS=-DHAVE_CONFIG_H -+# Commands used to build a shared archive. -+archive_cmds=$lt_archive_cmds -+archive_expsym_cmds=$lt_archive_expsym_cmds - --ac_libobjs= --ac_ltlibobjs= --for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue -- # 1. Remove the extension, and $U if already installed. -- ac_i=`echo "$ac_i" | -- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` -- # 2. Add them. -- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" -- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' --done --LIBOBJS=$ac_libobjs -+# Commands used to build a loadable module if different from building -+# a shared archive. -+module_cmds=$lt_module_cmds -+module_expsym_cmds=$lt_module_expsym_cmds - --LTLIBOBJS=$ac_ltlibobjs -+# Whether we are building with GNU ld or not. -+with_gnu_ld=$lt_with_gnu_ld - -+# Flag that allows shared libraries with undefined symbols to be built. -+allow_undefined_flag=$lt_allow_undefined_flag - --if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then -- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. --Usually this means the macro was only invoked conditionally." >&5 --echo "$as_me: error: conditional \"AMDEP\" was never defined. --Usually this means the macro was only invoked conditionally." >&2;} -- { (exit 1); exit 1; }; } --fi --if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then -- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. --Usually this means the macro was only invoked conditionally." >&5 --echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. --Usually this means the macro was only invoked conditionally." >&2;} -- { (exit 1); exit 1; }; } --fi --if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then -- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. --Usually this means the macro was only invoked conditionally." >&5 --echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. --Usually this means the macro was only invoked conditionally." >&2;} -- { (exit 1); exit 1; }; } --fi -+# Flag that enforces no undefined symbols. -+no_undefined_flag=$lt_no_undefined_flag -+ -+# Flag to hardcode \$libdir into a binary during linking. -+# This must work even if \$libdir does not exist -+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +-if test -z "$ac_cpp_err"; then ++if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. + continue + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- + # Passes both tests. + ac_preproc_ok=: + break + fi +-rm -f conftest.err conftest.$ac_ext ++rm -f conftest.err conftest.i conftest.$ac_ext --: ${CONFIG_STATUS=./config.status} --ac_clean_files_save=$ac_clean_files --ac_clean_files="$ac_clean_files $CONFIG_STATUS" --{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 --echo "$as_me: creating $CONFIG_STATUS" >&6;} --cat >$CONFIG_STATUS <<_ACEOF --#! $SHELL --# Generated by $as_me. --# Run this file to recreate the current configuration. --# Compiler output produced by configure, useful for debugging --# configure, is in config.log if it exists. -+# If ld is used when linking, flag to hardcode \$libdir into a binary -+# during linking. This must work even if \$libdir does not exist. -+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + done + # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +-rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then ++rm -f conftest.i conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then : + break + fi --debug=false --ac_cs_recheck=false --ac_cs_silent=false --SHELL=\${CONFIG_SHELL-$SHELL} +@@ -3639,8 +4521,8 @@ fi + else + ac_cv_prog_CPP=$CPP + fi +-echo "$as_me:$LINENO: result: $CPP" >&5 +-echo "${ECHO_T}$CPP" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 ++$as_echo "$CPP" >&6; } + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do +@@ -3650,11 +4532,7 @@ do + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ -_ACEOF -+# Whether we need a single "-rpath" flag with a separated argument. -+hardcode_libdir_separator=$lt_hardcode_libdir_separator - --cat >>$CONFIG_STATUS <<\_ACEOF --## --------------------- ## --## M4sh Initialization. ## --## --------------------- ## -+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -+# DIR into the resulting binary. -+hardcode_direct=$hardcode_direct - --# Be Bourne compatible --if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -- emulate sh -- NULLCMD=: -- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -- # is contrary to our usage. Disable this feature. -- alias -g '${1+"$@"}'='"$@"' --elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -- set -o posix --fi --DUALCASE=1; export DUALCASE # for MKS sh -+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -+# DIR into the resulting binary and the resulting library dependency is -+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -+# library is relocated. -+hardcode_direct_absolute=$hardcode_direct_absolute - --# Support unset when possible. --if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -- as_unset=unset +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #ifdef __STDC__ + # include +@@ -3663,85 +4541,40 @@ cat >>conftest.$ac_ext <<_ACEOF + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi -else -- as_unset=false +- ac_cpp_err=yes -fi -+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -+# into the resulting binary. -+hardcode_minus_L=$hardcode_minus_L - -+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -+# into the resulting binary. -+hardcode_shlibpath_var=$hardcode_shlibpath_var +-if test -z "$ac_cpp_err"; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++if ac_fn_c_try_cpp "$LINENO"; then : --# Work around bugs in pre-3.0 UWIN ksh. --$as_unset ENV MAIL MAILPATH --PS1='$ ' --PS2='> ' --PS4='+ ' -+# Set to "yes" if building a shared library automatically hardcodes DIR -+# into the library and all subsequent libraries and executables linked -+# against it. -+hardcode_automatic=$hardcode_automatic ++else + # Broken: fails on valid input. + continue + fi +-rm -f conftest.err conftest.$ac_ext ++rm -f conftest.err conftest.i conftest.$ac_ext --# NLS nuisances. --for as_var in \ -- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -- LC_TELEPHONE LC_TIME --do -- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -- eval $as_var=C; export $as_var +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else -- $as_unset $as_var +- ac_cpp_err= - fi --done -+# Set to yes if linker adds runtime paths of dependent libraries -+# to runtime path list. -+inherit_rpath=$inherit_rpath - --# Required to use basename. --if expr a : '$a$' >/dev/null 2>&1; then -- as_expr=expr --else -- as_expr=false --fi -+# Whether libtool must link a program against all its dependency libraries. -+link_all_deplibs=$link_all_deplibs - --if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -- as_basename=basename -else -- as_basename=false +- ac_cpp_err=yes -fi -+# Fix the shell variable \$srcfile for the compiler. -+fix_srcfile_path=$lt_fix_srcfile_path - -+# Set to "yes" if exported symbols are required. -+always_export_symbols=$always_export_symbols - --# Name of the executable. --as_me=`$as_basename "$0" || --$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \ -- X"$0" : 'X$//$$' \| \ -- X"$0" : 'X$/$$' \| \ -- . : '$.$' 2>/dev/null || --echo X/"$0" | -- sed '/^.*\/$[^/][^/]*$\/*$/{ s//\1/; q; } -- /^X\/$\/\/$$/{ s//\1/; q; } -- /^X\/$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` -+# The commands to list exported symbols. -+export_symbols_cmds=$lt_export_symbols_cmds +-if test -z "$ac_cpp_err"; then ++if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. + continue + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- + # Passes both tests. + ac_preproc_ok=: + break + fi +-rm -f conftest.err conftest.$ac_ext ++rm -f conftest.err conftest.i conftest.$ac_ext -+# Symbols that should not be listed in the preloaded symbols. -+exclude_expsyms=$lt_exclude_expsyms + done + # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +-rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then +- : ++rm -f conftest.i conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then : ++ + else +- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +-See \`config.log' for more details." >&5 +-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++as_fn_error $? "C preprocessor \"$CPP\" fails sanity check ++See \`config.log' for more details" "$LINENO" 5 ; } + fi --# PATH needs CR, and LINENO needs CR and PATH. --# Avoid depending upon Character Ranges. --as_cr_letters='abcdefghijklmnopqrstuvwxyz' --as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' --as_cr_Letters=$as_cr_letters$as_cr_LETTERS --as_cr_digits='0123456789' --as_cr_alnum=$as_cr_Letters$as_cr_digits -+# Symbols that must always be exported. -+include_expsyms=$lt_include_expsyms + ac_ext=c +@@ -3750,217 +4583,413 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS con + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu --# The user is always right. --if test "${PATH_SEPARATOR+set}" != set; then -- echo "#! /bin/sh" >conf$$.sh -- echo "exit 0" >>conf$$.sh -- chmod +x conf$$.sh -- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -- PATH_SEPARATOR=';' -- else -- PATH_SEPARATOR=: -- fi -- rm -f conf$$.sh --fi -+# Commands necessary for linking programs (against libraries) with templates. -+prelink_cmds=$lt_prelink_cmds +-# Check whether --enable-shared or --disable-shared was given. +-if test "${enable_shared+set}" = set; then +- enableval="$enable_shared" +- p=${PACKAGE-default} +- case $enableval in +- yes) enable_shared=yes ;; +- no) enable_shared=no ;; +- *) +- enable_shared=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_shared=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac +-else +- enable_shared=yes +-fi; ++case `pwd` in ++ *\ * | *\ *) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 ++$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; ++esac ++ ++ ++ ++macro_version='2.2.6b' ++macro_revision='1.3017' ++ ++ ++ ++ ++ ++ ++ ++ ++ -+# Specify filename containing input files. -+file_list_spec=$lt_file_list_spec +-# Check whether --enable-static or --disable-static was given. +-if test "${enable_static+set}" = set; then +- enableval="$enable_static" +- p=${PACKAGE-default} +- case $enableval in +- yes) enable_static=yes ;; +- no) enable_static=no ;; +- *) +- enable_static=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_static=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac +-else +- enable_static=yes +-fi; -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" || { -- # Find who we are. Look in the path if we contain no path at all -- # relative or not. -- case $0 in -- *[\\/]* ) as_myself=$0 ;; -- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break --done -+# How to hardcode a shared library path into an executable. -+hardcode_action=$hardcode_action +-# Check whether --enable-fast-install or --disable-fast-install was given. +-if test "${enable_fast_install+set}" = set; then +- enableval="$enable_fast_install" +- p=${PACKAGE-default} +- case $enableval in +- yes) enable_fast_install=yes ;; +- no) enable_fast_install=no ;; +- *) +- enable_fast_install=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_fast_install=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac +-else +- enable_fast_install=yes +-fi; ++ ++ ++ltmain="$ac_aux_dir/ltmain.sh" -- ;; -- esac -- # We did not find ourselves, most probably we were run as `sh COMMAND' -- # in which case we are not to be found in the path. -- if test "x$as_myself" = x; then -- as_myself=$0 -- fi -- if test ! -f "$as_myself"; then -- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 --echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + # Make sure we can run config.sub. +-$ac_config_sub sun4 >/dev/null 2>&1 || +- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +-echo "$as_me: error: cannot run $ac_config_sub" >&2;} - { (exit 1); exit 1; }; } -- fi -- case $CONFIG_SHELL in -- '') -- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for as_base in sh bash ksh sh5; do -- case $as_dir in -- /*) -- if ("$as_dir/$as_base" -c ' -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then -- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } -- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } -- CONFIG_SHELL=$as_dir/$as_base -- export CONFIG_SHELL -- exec "$CONFIG_SHELL" "$0" ${1+"$@"} -- fi;; -- esac -- done --done --;; -- esac -+# The directories searched by this compiler when creating a shared library. -+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs +- +-echo "$as_me:$LINENO: checking build system type" >&5 +-echo $ECHO_N "checking build system type... $ECHO_C" >&6 +-if test "${ac_cv_build+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_cv_build_alias=$build_alias +-test -z "$ac_cv_build_alias" && +- ac_cv_build_alias=`$ac_config_guess` +-test -z "$ac_cv_build_alias" && +- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +-echo "$as_me: error: cannot guess build type; you must specify one" >&2;} +- { (exit 1); exit 1; }; } +-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} +- { (exit 1); exit 1; }; } ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 -- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -- # uniformly replaced by the line number. The first 'sed' inserts a -- # line-number line before each line; the second 'sed' does the real -- # work. The second script uses 'N' to pair each line-number line -- # with the numbered line, and appends trailing '-' during -- # substitution so that $LINENO is not a special case at line end. -- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) -- sed '=' <$as_myself | -- sed ' -- N -- s,$,-, -- : loop -- s,^$['$as_cr_digits']*$$.*$[$]LINENO$[^'$as_cr_alnum'_]$,\1\2\1\3, -- t loop -- s,-$,, -- s,^['$as_cr_digits']*\n,, -- ' >$as_me.lineno && -- chmod +x $as_me.lineno || -- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 --echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} +-fi +-echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +-echo "${ECHO_T}$ac_cv_build" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 ++$as_echo_n "checking build system type... " >&6; } ++if test "${ac_cv_build+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && ++ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 ++$as_echo "$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;; ++esac + build=$ac_cv_build +-build_cpu=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\1/'` +-build_vendor=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\2/'` +-build_os=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\3/'` +- +- +-echo "$as_me:$LINENO: checking host system type" >&5 +-echo $ECHO_N "checking host system type... $ECHO_C" >&6 +-if test "${ac_cv_host+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_cv_host_alias=$host_alias +-test -z "$ac_cv_host_alias" && +- ac_cv_host_alias=$ac_cv_build_alias +-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} - { (exit 1); exit 1; }; } -+# Dependencies to place before and after the objects being linked to -+# create a shared library. -+predep_objects=$lt_predep_objects -+postdep_objects=$lt_postdep_objects -+predeps=$lt_predeps -+postdeps=$lt_postdeps ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 ++$as_echo_n "checking host system type... " >&6; } ++if test "${ac_cv_host+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 ++fi -- # Don't try to exec as it changes $[0], causing all sort of problems -- # (the dirname of $[0] is not the place where we might find the -- # original and so on. Autoconf is especially sensible to this). -- . ./$as_me.lineno -- # Exit status is that of the last command. -- exit --} -+# The library search path used internally by the compiler when linking -+# a shared library. -+compiler_lib_search_path=$lt_compiler_lib_search_path + fi +-echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +-echo "${ECHO_T}$ac_cv_host" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 ++$as_echo "$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;; ++esac + host=$ac_cv_host +-host_cpu=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\1/'` +-host_vendor=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\2/'` +-host_os=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 ++$as_echo_n "checking for a sed that does not truncate output... " >&6; } ++if test "${ac_cv_path_SED+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ ++ for ac_i in 1 2 3 4 5 6 7; do ++ ac_script="$ac_script$as_nl$ac_script" ++ done ++ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed ++ { ac_script=; unset ac_script;} ++ if test -z "$SED"; then ++ ac_path_SED_found=false ++ # Loop through the user's path and test for each of PROGNAME-LIST ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue ++# Check for GNU ac_path_SED and select it if it is found. ++ # Check for GNU $ac_path_SED ++case `"$ac_path_SED" --version 2>&1` in ++*GNU*) ++ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; ++*) ++ ac_count=0 ++ $as_echo_n 0123456789 >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ $as_echo '' >> "conftest.nl" ++ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ as_fn_arith $ac_count + 1 && ac_count=$as_val ++ if test $ac_count -gt ${ac_path_SED_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_SED="$ac_path_SED" ++ ac_path_SED_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ $ac_path_SED_found && break 3 ++ done ++ done ++ done ++IFS=$as_save_IFS ++ if test -z "$ac_cv_path_SED"; then ++ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 ++ fi ++else ++ ac_cv_path_SED=$SED ++fi ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 ++$as_echo "$ac_cv_path_SED" >&6; } ++ SED="$ac_cv_path_SED" ++ rm -f conftest.sed ++ ++test -z "$SED" && SED=sed ++Xsed="$SED -e 1s/^X//" ++ ++ ++ -+# ### END LIBTOOL CONFIG --case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in -- *c*,-n*) ECHO_N= ECHO_C=' --' ECHO_T=' ' ;; -- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; -- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; --esac -+_LT_EOF +-echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 +-if test "${lt_cv_path_SED+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 ++$as_echo_n "checking for grep that handles long lines and -e... " >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- # Loop through the user's path and test for sed and gsed. +-# Then use that list of sed's as ones to test for truncation. +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH ++ if test -z "$GREP"; then ++ ac_path_GREP_found=false ++ # Loop through the user's path and test for each of PROGNAME-LIST ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for lt_ac_prog in sed gsed; do ++ for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then +- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" +- fi ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++# Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ $as_echo_n 0123456789 >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ $as_echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ as_fn_arith $ac_count + 1 && ac_count=$as_val ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ $ac_path_GREP_found && break 3 + done + done +-done +-lt_ac_max=0 +-lt_ac_count=0 +-# Add /usr/xpg4/bin/sed as it is typically found on Solaris +-# along with /bin/sed that truncates output. +-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do +- test ! -f $lt_ac_sed && break +- cat /dev/null > conftest.in +- lt_ac_count=0 +- echo $ECHO_N "0123456789$ECHO_C" >conftest.in +- # Check for GNU sed and select it if it is found. +- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then +- lt_cv_path_SED=$lt_ac_sed +- break ++ done ++IFS=$as_save_IFS ++ if test -z "$ac_cv_path_GREP"; then ++ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +- while true; do +- cat conftest.in conftest.in >conftest.tmp +- mv conftest.tmp conftest.in +- cp conftest.in conftest.nl +- echo >>conftest.nl +- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break +- cmp -s conftest.out conftest.nl || break +- # 10000 chars as input seems more than enough +- test $lt_ac_count -gt 10 && break +- lt_ac_count=`expr $lt_ac_count + 1` +- if test $lt_ac_count -gt $lt_ac_max; then +- lt_ac_max=$lt_ac_count +- lt_cv_path_SED=$lt_ac_sed ++else ++ ac_cv_path_GREP=$GREP ++fi ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 ++$as_echo "$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 ++$as_echo_n "checking for egrep... " >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ if test -z "$EGREP"; then ++ ac_path_EGREP_found=false ++ # Loop through the user's path and test for each of PROGNAME-LIST ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++# Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ $as_echo_n 0123456789 >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ $as_echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ as_fn_arith $ac_count + 1 && ac_count=$as_val ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count + fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break + done +-done +-SED=$lt_cv_path_SED ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ $ac_path_EGREP_found && break 3 ++ done ++ done ++ done ++IFS=$as_save_IFS ++ if test -z "$ac_cv_path_EGREP"; then ++ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 ++ fi ++else ++ ac_cv_path_EGREP=$EGREP ++fi --if expr a : '$a$' >/dev/null 2>&1; then -- as_expr=expr --else -- as_expr=false -+ case $host_os in -+ aix3*) -+ cat <<\_LT_EOF >> "$cfgfile" -+# AIX sometimes has problems with the GCC collect2 program. For some -+# reason, if we set the COLLECT_NAMES environment variable, the problems -+# vanish in a puff of smoke. -+if test "X${COLLECT_NAMES+set}" != Xset; then -+ COLLECT_NAMES= -+ export COLLECT_NAMES ++ fi fi -+_LT_EOF -+ ;; -+ esac - --rm -f conf$$ conf$$.exe conf$$.file --echo >conf$$.file --if ln -s conf$$.file conf$$ 2>/dev/null; then -- # We could just check for DJGPP; but this test a) works b) is more generic -- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). -- if test -f conf$$.exe; then -- # Don't use ln at all; we don't have any links -- as_ln_s='cp -p' -- else -- as_ln_s='ln -s' -- fi --elif ln conf$$.file conf$$ 2>/dev/null; then -- as_ln_s=ln --else -- as_ln_s='cp -p' --fi --rm -f conf$$ conf$$.exe conf$$.file ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 ++$as_echo "$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" --if mkdir -p . 2>/dev/null; then -- as_mkdir_p=: --else -- test -d ./-p && rmdir ./-p -- as_mkdir_p=false --fi -+ltmain="$ac_aux_dir/ltmain.sh" +-echo "$as_me:$LINENO: result: $SED" >&5 +-echo "${ECHO_T}$SED" >&6 --as_executable_p="test -f" +-echo "$as_me:$LINENO: checking for egrep" >&5 +-echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +-if test "${ac_cv_prog_egrep+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 ++$as_echo_n "checking for fgrep... " >&6; } ++if test "${ac_cv_path_FGREP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' ++ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 ++ then ac_cv_path_FGREP="$GREP -F" ++ else ++ if test -z "$FGREP"; then ++ ac_path_FGREP_found=false ++ # Loop through the user's path and test for each of PROGNAME-LIST ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in fgrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue ++# Check for GNU ac_path_FGREP and select it if it is found. ++ # Check for GNU $ac_path_FGREP ++case `"$ac_path_FGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; ++*) ++ ac_count=0 ++ $as_echo_n 0123456789 >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ $as_echo 'FGREP' >> "conftest.nl" ++ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ as_fn_arith $ac_count + 1 && ac_count=$as_val ++ if test $ac_count -gt ${ac_path_FGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_FGREP="$ac_path_FGREP" ++ ac_path_FGREP_max=$ac_count + fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ $ac_path_FGREP_found && break 3 ++ done ++ done ++ done ++IFS=$as_save_IFS ++ if test -z "$ac_cv_path_FGREP"; then ++ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 ++ fi ++else ++ ac_cv_path_FGREP=$FGREP + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +-echo "${ECHO_T}$ac_cv_prog_egrep" >&6 +- EGREP=$ac_cv_prog_egrep --# Sed expression to map a string onto a valid CPP name. --as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -+ # We use sed instead of cat because bash on DJGPP gets confused if -+ # if finds mixed CR/LF and LF-only lines. Since sed operates in -+ # text mode, it properly converts lines to CR/LF. This bash problem -+ # is reportedly fixed, but why not run on old versions too? -+ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ -+ || (rm -f "$cfgfile"; exit 1) ++ fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 ++$as_echo "$ac_cv_path_FGREP" >&6; } ++ FGREP="$ac_cv_path_FGREP" ++ ++ ++test -z "$GREP" && GREP=grep --# Sed expression to map a string onto a valid variable name. --as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+ case $xsi_shell in -+ yes) -+ cat << \_LT_EOF >> "$cfgfile" -+# func_dirname file append nondir_replacement -+# Compute the dirname of FILE. If nonempty, add APPEND to the result, -+# otherwise set result to NONDIR_REPLACEMENT. -+func_dirname () -+{ -+ case ${1} in -+ */*) func_dirname_result="${1%/*}${2}" ;; -+ * ) func_dirname_result="${3}" ;; -+ esac -+} +-# Check whether --with-gnu-ld or --without-gnu-ld was given. +-if test "${with_gnu_ld+set}" = set; then +- withval="$with_gnu_ld" +- test "$withval" = no || with_gnu_ld=yes ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# Check whether --with-gnu-ld was given. ++if test "${with_gnu_ld+set}" = set; then : ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + else + with_gnu_ld=no +-fi; ++fi ++ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 ++$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -3973,9 +5002,9 @@ echo $ECHO_N "checking for ld used by $C + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld +- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` +- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; +@@ -3989,14 +5018,14 @@ echo $ECHO_N "checking for ld used by $C + ;; + esac + elif test "$with_gnu_ld" = yes; then +- echo "$as_me:$LINENO: checking for GNU ld" >&5 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 ++$as_echo_n "checking for GNU ld... " >&6; } + else +- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 ++$as_echo_n "checking for non-GNU ld... " >&6; } + fi +-if test "${lt_cv_path_LD+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++if test "${lt_cv_path_LD+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +@@ -4006,7 +5035,7 @@ else + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some GNU ld's only accept -v. ++ # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +-echo "${ECHO_T}$LD" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 ++$as_echo "$LD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi +-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} +- { (exit 1); exit 1; }; } +-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 +-if test "${lt_cv_prog_gnu_ld+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 ++$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } ++if test "${lt_cv_prog_gnu_ld+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- # I'd rather use --version here, but apparently some GNU ld's only accept -v. ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. + case `$LD -v 2>&1 &1 &5 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 ++$as_echo "$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld --# CDPATH. --$as_unset CDPATH -+# func_dirname_and_basename file append nondir_replacement -+# perform func_basename and func_dirname in a single function -+# call: -+# dirname: Compute the dirname of FILE. If nonempty, -+# add APPEND to the result, otherwise set result -+# to NONDIR_REPLACEMENT. -+# value returned in "$func_dirname_result" -+# basename: Compute filename of FILE. -+# value retuned in "$func_basename_result" -+# Implementation must be kept synchronized with func_dirname -+# and func_basename. For efficiency, we do not delegate to -+# those functions but instead duplicate the functionality here. -+func_dirname_and_basename () -+{ -+ case ${1} in -+ */*) func_dirname_result="${1%/*}${2}" ;; -+ * ) func_dirname_result="${3}" ;; -+ esac -+ func_basename_result="${1##*/}" -+} --exec 6>&1 -+# func_stripname prefix suffix name -+# strip PREFIX and SUFFIX off of NAME. -+# PREFIX and SUFFIX must not contain globbing or regex special -+# characters, hashes, percent signs, but SUFFIX may contain a leading -+# dot (in which case that matches only a dot). -+func_stripname () -+{ -+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are -+ # positional parameters, so assign one to ordinary parameter first. -+ func_stripname_result=${3} -+ func_stripname_result=${func_stripname_result#"${1}"} -+ func_stripname_result=${func_stripname_result%"${2}"} -+} +-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 +-if test "${lt_cv_ld_reload_flag+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_ld_reload_flag='-r' +-fi +-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 +-reload_flag=$lt_cv_ld_reload_flag +-case $reload_flag in +-"" | " "*) ;; +-*) reload_flag=" $reload_flag" ;; +-esac +-reload_cmds='$LD$reload_flag -o $output$reload_objs' --# Open the log real soon, to keep \$[0] and so on meaningful, and to --# report actual input values of CONFIG_FILES etc. instead of their --# values after options handling. Logging --version etc. is OK. --exec 5>>config.log -+# func_opt_split -+func_opt_split () - { -- echo -- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX --## Running $as_me. ## --_ASBOX --} >&5 --cat >&5 <<_CSEOF -+ func_opt_split_opt=${1%%=*} -+ func_opt_split_arg=${1#*=} -+} +-echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 +-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 +-if test "${lt_cv_path_NM+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$NM"; then +- # Let the user override the test. ++ ++ ++ ++ ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 ++$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } ++if test "${lt_cv_path_NM+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$NM"; then ++ # Let the user override the test. + lt_cv_path_NM="$NM" + else +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- tmp_nm="$ac_dir/${ac_tool_prefix}nm" +- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then +- # Check to see if the nm accepts a BSD-compat flag. +- # Adding the `sed 1q' prevents false positives on HP-UX, which says: +- # nm: unknown option "B" ignored +- # Tru64's nm complains that /dev/null is an invalid object file +- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in +- */dev/null* | *'Invalid file or object type'*) +- lt_cv_path_NM="$tmp_nm -B" +- break +- ;; +- *) +- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in +- */dev/null*) +- lt_cv_path_NM="$tmp_nm -p" ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) +- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but +- continue # so that we can try to find one that supports BSD flags ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac + ;; + esac +- esac +- fi ++ fi ++ done ++ IFS="$lt_save_ifs" + done +- IFS="$lt_save_ifs" +- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm ++ : ${lt_cv_path_NM=no} + fi + fi +-echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +-echo "${ECHO_T}$lt_cv_path_NM" >&6 +-NM="$lt_cv_path_NM" +- +-echo "$as_me:$LINENO: checking whether ln -s works" >&5 +-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 +-LN_S=$as_ln_s +-if test "$LN_S" = "ln -s"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 ++$as_echo "$lt_cv_path_NM" >&6; } ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" + else +- echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +-echo "${ECHO_T}no, using $LN_S" >&6 +-fi +- +-echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 +-echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 +-if test "${lt_cv_deplibs_check_method+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_DUMPBIN+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- lt_cv_file_magic_cmd='$MAGIC_CMD' +-lt_cv_file_magic_test_file= +-lt_cv_deplibs_check_method='unknown' +-# Need to set the preceding variable on all platforms that support +-# interlibrary dependencies. +-# 'none' -- dependencies not supported. +-# `unknown' -- same as none, but documents that we really don't know. +-# 'pass_all' -- all dependencies passed with no checks. +-# 'test_compile' -- check by making test program. +-# 'file_magic [[regex]]' -- check by looking for files in library path +-# which responds to the $file_magic_cmd with a given extended regex. +-# If you have `file' or equivalent on your system and you're not sure +-# whether `pass_all' will *always* work, you probably want this one. ++ if test -n "$DUMPBIN"; then ++ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS --This file was extended by I2O RAID Utilities $as_me 0.0.6, which was --generated by GNU Autoconf 2.59. Invocation command line was -+# func_lo2o object -+func_lo2o () -+{ -+ case ${1} in -+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; -+ *) func_lo2o_result=${1} ;; -+ esac -+} +-case $host_os in +-aix4* | aix5*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++fi ++fi ++DUMPBIN=$ac_cv_prog_DUMPBIN ++if test -n "$DUMPBIN"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 ++$as_echo "$DUMPBIN" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi -- CONFIG_FILES = $CONFIG_FILES -- CONFIG_HEADERS = $CONFIG_HEADERS -- CONFIG_LINKS = $CONFIG_LINKS -- CONFIG_COMMANDS = $CONFIG_COMMANDS -- $ $0 $@ -+# func_xform libobj-or-source -+func_xform () -+{ -+ func_xform_result=${1%.*}.lo -+} +-beos*) +- lt_cv_deplibs_check_method=pass_all +- ;; --_CSEOF --echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 --echo >&5 --_ACEOF -+# func_arith arithmetic-term... -+func_arith () -+{ -+ func_arith_result=$(( $* )) -+} +-bsdi4*) +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' +- lt_cv_file_magic_cmd='/usr/bin/file -L' +- lt_cv_file_magic_test_file=/shlib/libc.so +- ;; ++ test -n "$DUMPBIN" && break ++ done ++fi ++if test -z "$DUMPBIN"; then ++ ac_ct_DUMPBIN=$DUMPBIN ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_DUMPBIN"; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS --# Files that config.status was made for. --if test -n "$ac_config_files"; then -- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS --fi -+# func_len string -+# STRING may not start with a hyphen. -+func_len () -+{ -+ func_len_result=${#1} -+} +-cygwin*) +- # func_win32_libid is a shell function defined in ltmain.sh +- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' +- lt_cv_file_magic_cmd='func_win32_libid' +- ;; ++fi ++fi ++ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN ++if test -n "$ac_ct_DUMPBIN"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 ++$as_echo "$ac_ct_DUMPBIN" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi --if test -n "$ac_config_headers"; then -- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS --fi -+_LT_EOF -+ ;; -+ *) # Bourne compatible functions. -+ cat << \_LT_EOF >> "$cfgfile" +-mingw* | pw32*) +- # Base MSYS/MinGW do not provide the 'file' command needed by +- # func_win32_libid shell function, so use a weaker test based on 'objdump'. +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' +- lt_cv_file_magic_cmd='$OBJDUMP -f' +- ;; --if test -n "$ac_config_links"; then -- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS --fi -+# func_dirname file append nondir_replacement -+# Compute the dirname of FILE. If nonempty, add APPEND to the result, -+# otherwise set result to NONDIR_REPLACEMENT. -+func_dirname () -+{ -+ # Extract subdirectory from the argument. -+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` -+ if test "X$func_dirname_result" = "X${1}"; then -+ func_dirname_result="${3}" -+ else -+ func_dirname_result="$func_dirname_result${2}" -+ fi -+} +-darwin* | rhapsody*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++ test -n "$ac_ct_DUMPBIN" && break ++done --if test -n "$ac_config_commands"; then -- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS --fi -+# func_basename file -+func_basename () -+{ -+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -+} +-freebsd* | kfreebsd*-gnu) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- case $host_cpu in +- i*86 ) +- # Not sure whether the presence of OpenBSD here was a mistake. +- # Let's accept both of them until this is cleared up. +- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` +- ;; +- esac ++ if test "x$ac_ct_DUMPBIN" = x; then ++ DUMPBIN=":" + else +- lt_cv_deplibs_check_method=pass_all ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ DUMPBIN=$ac_ct_DUMPBIN + fi +- ;; ++fi --cat >>$CONFIG_STATUS <<\_ACEOF +-gnu*) +- lt_cv_deplibs_check_method=pass_all +- ;; --ac_cs_usage="\ --\`$as_me' instantiates files from templates according to the --current configuration. -+# func_stripname prefix suffix name -+# strip PREFIX and SUFFIX off of NAME. -+# PREFIX and SUFFIX must not contain globbing or regex special -+# characters, hashes, percent signs, but SUFFIX may contain a leading -+# dot (in which case that matches only a dot). -+# func_strip_suffix prefix name -+func_stripname () -+{ -+ case ${2} in -+ .*) func_stripname_result=`$ECHO "X${3}" \ -+ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; -+ *) func_stripname_result=`$ECHO "X${3}" \ -+ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; -+ esac -+} +-hpux10.20* | hpux11*) +- lt_cv_file_magic_cmd=/usr/bin/file +- case "$host_cpu" in +- ia64*) +- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' +- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so +- ;; +- hppa*64*) +- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' +- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl +- ;; +- *) +- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' +- lt_cv_file_magic_test_file=/usr/lib/libc.sl +- ;; +- esac +- ;; ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" ++ fi ++fi ++test -z "$NM" && NM=nm --Usage: $0 [OPTIONS] [FILE]... -+# sed scripts: -+my_sed_long_opt='1s/^$-[^=]*$=.*/\1/;q' -+my_sed_long_arg='1s/^-[^=]*=//' +-irix5* | irix6* | nonstopux*) +- case $LD in +- *-32|*"-32 ") libmagic=32-bit;; +- *-n32|*"-n32 ") libmagic=N32;; +- *-64|*"-64 ") libmagic=64-bit;; +- *) libmagic=never-match;; +- esac +- lt_cv_deplibs_check_method=pass_all +- ;; -- -h, --help print this help, then exit -- -V, --version print version number, then exit -- -q, --quiet do not print progress messages -- -d, --debug don't remove temporary files -- --recheck update $as_me by reconfiguring in the same conditions -- --file=FILE[:TEMPLATE] -- instantiate the configuration file FILE -- --header=FILE[:TEMPLATE] -- instantiate the configuration header FILE -+# func_opt_split -+func_opt_split () -+{ -+ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` -+ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` -+} +-# This must be Linux ELF. +-linux*) +- case $host_cpu in +- alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*|x86_64*) +- lt_cv_deplibs_check_method=pass_all ;; +- *) +- # glibc up to 2.1.1 does not perform some relocations on ARM +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; +- esac +- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` +- lt_cv_deplibs_check_method=pass_all +- ;; --Configuration files: --$config_files -+# func_lo2o object -+func_lo2o () -+{ -+ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` -+} +-netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' +- else +- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' +- fi +- ;; --Configuration headers: --$config_headers -+# func_xform libobj-or-source -+func_xform () -+{ -+ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` -+} +-newos6*) +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=/usr/lib/libnls.so +- ;; --Configuration commands: --$config_commands -+# func_arith arithmetic-term... -+func_arith () -+{ -+ func_arith_result=`expr "$@"` -+} +-nto-qnx*) +- lt_cv_deplibs_check_method=unknown +- ;; --Report bugs to ." --_ACEOF -+# func_len string -+# STRING may not start with a hyphen. -+func_len () -+{ -+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` -+} +-openbsd*) +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' +- else +- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 ++$as_echo_n "checking the name lister ($NM) interface... " >&6; } ++if test "${lt_cv_nm_interface+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:5266: $ac_compile\"" >&5) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:5269: $NM \\\"conftest.$ac_objext\\\"\"" >&5) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:5272: output\"" >&5) ++ cat conftest.out >&5 ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" + fi +- ;; ++ rm -f conftest* ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 ++$as_echo "$lt_cv_nm_interface" >&6; } --cat >>$CONFIG_STATUS <<_ACEOF --ac_cs_version="\\ --I2O RAID Utilities config.status 0.0.6 --configured by $0, generated by GNU Autoconf 2.59, -- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" -+_LT_EOF -+esac +-osf3* | osf4* | osf5*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 ++$as_echo_n "checking whether ln -s works... " >&6; } ++LN_S=$as_ln_s ++if test "$LN_S" = "ln -s"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 ++$as_echo "no, using $LN_S" >&6; } ++fi --Copyright (C) 2003 Free Software Foundation, Inc. --This config.status script is free software; the Free Software Foundation --gives unlimited permission to copy, distribute and modify it." --srcdir=$srcdir --INSTALL="$INSTALL" --_ACEOF -+case $lt_shell_append in -+ yes) -+ cat << \_LT_EOF >> "$cfgfile" +-sco3.2v5*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++# find the maximum length of command line arguments ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 ++$as_echo_n "checking the maximum length of command line arguments... " >&6; } ++if test "${lt_cv_sys_max_cmd_len+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ i=0 ++ teststring="ABCD" --cat >>$CONFIG_STATUS <<\_ACEOF --# If no file are specified by the user, then we need to provide default --# value. By we need to know if files were specified by the user. --ac_need_defaults=: --while test $# != 0 --do -- case $1 in -- --*=*) -- ac_option=`expr "x$1" : 'x$[^=]*$='` -- ac_optarg=`expr "x$1" : 'x[^=]*=$.*$'` -- ac_shift=: -+# func_append var value -+# Append VALUE to the end of shell variable VAR. -+func_append () -+{ -+ eval "$1+=\$2" -+} -+_LT_EOF +-solaris*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- case $host_vendor in +- motorola) +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ;; -- -*) -- ac_option=$1 -- ac_optarg=$2 -- ac_shift=shift -+ *) -+ cat << \_LT_EOF >> "$cfgfile" +- ncr) +- lt_cv_deplibs_check_method=pass_all + -+# func_append var value -+# Append VALUE to the end of shell variable VAR. -+func_append () -+{ -+ eval "$1=\$$1\$2" -+} ++ cygwin* | mingw* | cegcc*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; + ;; +- sequent) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + -+_LT_EOF ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; + ;; +- sni) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" +- lt_cv_file_magic_test_file=/lib/libc.so ++ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi + ;; +- siemens) +- lt_cv_deplibs_check_method=pass_all ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi ;; -- *) # This is not an option, so the user has probably given explicit -- # arguments. -- ac_option=$1 -- ac_need_defaults=false;; esac +- ;; -- case $ac_option in -- # Handling of the options. --_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF -- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) -- ac_cs_recheck=: ;; -- --version | --vers* | -V ) -- echo "$ac_cs_version"; exit 0 ;; -- --he | --h) -- # Conflict between --help and --header -- { { echo "$as_me:$LINENO: error: ambiguous option: $1 --Try \`$0 --help' for more information." >&5 --echo "$as_me: error: ambiguous option: $1 --Try \`$0 --help' for more information." >&2;} -- { (exit 1); exit 1; }; };; -- --help | --hel | -h ) -- echo "$ac_cs_usage"; exit 0 ;; -- --debug | --d* | -d ) -- debug=: ;; -- --file | --fil | --fi | --f ) -- $ac_shift -- CONFIG_FILES="$CONFIG_FILES $ac_optarg" -- ac_need_defaults=false;; -- --header | --heade | --head | --hea ) -- $ac_shift -- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" -- ac_need_defaults=false;; -- -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -- | -silent | --silent | --silen | --sile | --sil | --si | --s) -- ac_cs_silent=: ;; - -- # This is an error. -- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 --Try \`$0 --help' for more information." >&5 --echo "$as_me: error: unrecognized option: $1 --Try \`$0 --help' for more information." >&2;} -- { (exit 1); exit 1; }; } ;; -+ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ -+ || (rm -f "$cfgfile"; exit 1) -+ -+ mv -f "$cfgfile" "$ofile" || -+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") -+ chmod +x "$ofile" - -- *) ac_config_targets="$ac_config_targets $1" ;; - -- esac -- shift --done -+ cat <<_LT_EOF >> "$ofile" - --ac_configure_extra_args= -+# ### BEGIN LIBTOOL TAG CONFIG: CXX - --if $ac_cs_silent; then -- exec 6>/dev/null -- ac_configure_extra_args="$ac_configure_extra_args --silent" --fi -+# The linker used to build libraries. -+LD=$lt_LD_CXX - --_ACEOF --cat >>$CONFIG_STATUS <<_ACEOF --if \$ac_cs_recheck; then -- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 -- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion --fi -+# Commands used to build an old-style archive. -+old_archive_cmds=$lt_old_archive_cmds_CXX - --_ACEOF -+# A language specific compiler. -+CC=$lt_compiler_CXX - --cat >>$CONFIG_STATUS <<_ACEOF --# --# INIT-COMMANDS section. --# -+# Is the compiler the GNU compiler? -+with_gcc=$GCC_CXX - --AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" -+# Compiler flag to turn off builtin functions. -+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX - --_ACEOF -+# How to pass a linker flag through the compiler. -+wl=$lt_lt_prog_compiler_wl_CXX +-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*) +- lt_cv_deplibs_check_method=pass_all +- ;; +-esac ++fi -+# Additional compiler flags for building library objects. -+pic_flag=$lt_lt_prog_compiler_pic_CXX ++if test -n $lt_cv_sys_max_cmd_len ; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 ++$as_echo "$lt_cv_sys_max_cmd_len" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 ++$as_echo "none" >&6; } + fi +-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 +-file_magic_cmd=$lt_cv_file_magic_cmd +-deplibs_check_method=$lt_cv_deplibs_check_method +-test -z "$deplibs_check_method" && deplibs_check_method=unknown ++max_cmd_len=$lt_cv_sys_max_cmd_len -+# Compiler flag to prevent dynamic linking. -+link_static_flag=$lt_lt_prog_compiler_static_CXX --cat >>$CONFIG_STATUS <<\_ACEOF --for ac_config_target in $ac_config_targets --do -- case "$ac_config_target" in -- # Handling of arguments. -- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; -- "raideng/Makefile" ) CONFIG_FILES="$CONFIG_FILES raideng/Makefile" ;; -- "raidutil/Makefile" ) CONFIG_FILES="$CONFIG_FILES raidutil/Makefile" ;; -- "lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; -- "distribution/raidutils.spec" ) CONFIG_FILES="$CONFIG_FILES distribution/raidutils.spec" ;; -- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; -- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; -- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 --echo "$as_me: error: invalid argument: $ac_config_target" >&2;} -- { (exit 1); exit 1; }; };; -- esac --done -+# Does compiler simultaneously support -c and -o options? -+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX --# If the user did not use the arguments to specify the items to instantiate, --# then the envvar interface is used. Set only those that are not. --# We use the long form for the default assignment because of an extremely --# bizarre bug on SunOS 4.1.3. --if $ac_need_defaults; then -- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers -- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands --fi -+# Whether or not to add -lc for building shared libraries. -+build_libtool_need_lc=$archive_cmds_need_lc_CXX --# Have a temporary directory for convenience. Make it in the build tree --# simply because there is no reason to put it here, and in addition, --# creating and moving files from /tmp can sometimes cause problems. --# Create a temporary directory, and hook for its removal unless debugging. --$debug || --{ -- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 -- trap '{ (exit 1); exit 1; }' 1 2 13 15 --} -+# Whether or not to disallow shared libs when runtime libs are static. -+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} --# Create a (secure) tmp directory for tmp files. -+# Compiler flag to allow reflexive dlopens. -+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX +-# Allow CC to be a program name with arguments. +-compiler=$CC --{ -- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && -- test -n "$tmp" && test -d "$tmp" --} || --{ -- tmp=./confstat$$-$RANDOM -- (umask 077 && mkdir $tmp) --} || --{ -- echo "$me: cannot create a temporary directory in ." >&2 -- { (exit 1); exit 1; } --} -+# Compiler flag to generate shared objects directly from archives. -+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX ++: ${CP="cp -f"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 ++$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } ++# Try some XSI features ++xsi_shell=no ++( _lt_dummy="a/b/c" ++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,, \ ++ && eval 'test $(( 1 + 1 )) -eq 2 \ ++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ ++ && xsi_shell=yes ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 ++$as_echo "$xsi_shell" >&6; } ++ ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 ++$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } ++lt_shell_append=no ++( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ ++ >/dev/null 2>&1 \ ++ && lt_shell_append=yes ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 ++$as_echo "$lt_shell_append" >&6; } --_ACEOF -+# Whether the compiler copes with passing no objects directly. -+compiler_needs_object=$lt_compiler_needs_object_CXX +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +-if test "${enable_libtool_lock+set}" = set; then +- enableval="$enable_libtool_lock" --cat >>$CONFIG_STATUS <<_ACEOF -+# Create an old-style archive from a shared archive. -+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX +-fi; +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ lt_unset=unset ++else ++ lt_unset=false ++fi --# --# CONFIG_FILES section. --# -+# Create a temporary old-style archive to link instead of a shared archive. -+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX +-# Some flags need to be propagated to the compiler or linker for good +-# libtool support. +-case $host in +-ia64-*-hpux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *ELF-32*) +- HPUX_IA64_MODE="32" +- ;; +- *ELF-64*) +- HPUX_IA64_MODE="64" +- ;; +- esac +- fi +- rm -rf conftest* ++ ++ ++ ++ ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ lt_SP2NL='tr \040 \012' ++ lt_NL2SP='tr \015\012 \040\040' + ;; +-*-*-irix6*) +- # Find out which ABI we are using. +- echo '#line 4361 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- if test "$lt_cv_prog_gnu_ld" = yes; then +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -melf32bsmip" +- ;; +- *N32*) +- LD="${LD-ld} -melf32bmipn32" +- ;; +- *64-bit*) +- LD="${LD-ld} -melf64bmip" +- ;; +- esac +- else +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -32" +- ;; +- *N32*) +- LD="${LD-ld} -n32" +- ;; +- *64-bit*) +- LD="${LD-ld} -64" +- ;; +- esac +- fi +- fi +- rm -rf conftest* ++ *) # EBCDIC based system ++ lt_SP2NL='tr \100 \n' ++ lt_NL2SP='tr \r\n \100\100' + ;; ++esac --# No need to generate the scripts if there are no CONFIG_FILES. --# This happens for instance when ./config.status config.h --if test -n "\$CONFIG_FILES"; then -- # Protect against being on the right side of a sed subst in config.status. -- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; -- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF --s,@SHELL@,$SHELL,;t t --s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t --s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t --s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t --s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t --s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t --s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t --s,@exec_prefix@,$exec_prefix,;t t --s,@prefix@,$prefix,;t t --s,@program_transform_name@,$program_transform_name,;t t --s,@bindir@,$bindir,;t t --s,@sbindir@,$sbindir,;t t --s,@libexecdir@,$libexecdir,;t t --s,@datadir@,$datadir,;t t --s,@sysconfdir@,$sysconfdir,;t t --s,@sharedstatedir@,$sharedstatedir,;t t --s,@localstatedir@,$localstatedir,;t t --s,@libdir@,$libdir,;t t --s,@includedir@,$includedir,;t t --s,@oldincludedir@,$oldincludedir,;t t --s,@infodir@,$infodir,;t t --s,@mandir@,$mandir,;t t --s,@build_alias@,$build_alias,;t t --s,@host_alias@,$host_alias,;t t --s,@target_alias@,$target_alias,;t t --s,@DEFS@,$DEFS,;t t --s,@ECHO_C@,$ECHO_C,;t t --s,@ECHO_N@,$ECHO_N,;t t --s,@ECHO_T@,$ECHO_T,;t t --s,@LIBS@,$LIBS,;t t --s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t --s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t --s,@INSTALL_DATA@,$INSTALL_DATA,;t t --s,@CYGPATH_W@,$CYGPATH_W,;t t --s,@PACKAGE@,$PACKAGE,;t t --s,@VERSION@,$VERSION,;t t --s,@ACLOCAL@,$ACLOCAL,;t t --s,@AUTOCONF@,$AUTOCONF,;t t --s,@AUTOMAKE@,$AUTOMAKE,;t t --s,@AUTOHEADER@,$AUTOHEADER,;t t --s,@MAKEINFO@,$MAKEINFO,;t t --s,@install_sh@,$install_sh,;t t --s,@STRIP@,$STRIP,;t t --s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t --s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t --s,@mkdir_p@,$mkdir_p,;t t --s,@AWK@,$AWK,;t t --s,@SET_MAKE@,$SET_MAKE,;t t --s,@am__leading_dot@,$am__leading_dot,;t t --s,@AMTAR@,$AMTAR,;t t --s,@am__tar@,$am__tar,;t t --s,@am__untar@,$am__untar,;t t --s,@CXX@,$CXX,;t t --s,@CXXFLAGS@,$CXXFLAGS,;t t --s,@LDFLAGS@,$LDFLAGS,;t t --s,@CPPFLAGS@,$CPPFLAGS,;t t --s,@ac_ct_CXX@,$ac_ct_CXX,;t t --s,@EXEEXT@,$EXEEXT,;t t --s,@OBJEXT@,$OBJEXT,;t t --s,@DEPDIR@,$DEPDIR,;t t --s,@am__include@,$am__include,;t t --s,@am__quote@,$am__quote,;t t --s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t --s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t --s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t --s,@CXXDEPMODE@,$CXXDEPMODE,;t t --s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t --s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t --s,@CC@,$CC,;t t --s,@CFLAGS@,$CFLAGS,;t t --s,@ac_ct_CC@,$ac_ct_CC,;t t --s,@CCDEPMODE@,$CCDEPMODE,;t t --s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t --s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t --s,@CPP@,$CPP,;t t --s,@build@,$build,;t t --s,@build_cpu@,$build_cpu,;t t --s,@build_vendor@,$build_vendor,;t t --s,@build_os@,$build_os,;t t --s,@host@,$host,;t t --s,@host_cpu@,$host_cpu,;t t --s,@host_vendor@,$host_vendor,;t t --s,@host_os@,$host_os,;t t --s,@EGREP@,$EGREP,;t t --s,@LN_S@,$LN_S,;t t --s,@ECHO@,$ECHO,;t t --s,@AR@,$AR,;t t --s,@ac_ct_AR@,$ac_ct_AR,;t t --s,@RANLIB@,$RANLIB,;t t --s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t --s,@CXXCPP@,$CXXCPP,;t t --s,@F77@,$F77,;t t --s,@FFLAGS@,$FFLAGS,;t t --s,@ac_ct_F77@,$ac_ct_F77,;t t --s,@LIBTOOL@,$LIBTOOL,;t t --s,@LIBOBJS@,$LIBOBJS,;t t --s,@LTLIBOBJS@,$LTLIBOBJS,;t t --CEOF -- --_ACEOF -- -- cat >>$CONFIG_STATUS <<\_ACEOF -- # Split the substitutions into bite-sized pieces for seds with -- # small command number limits, like on Digital OSF/1 and HP-UX. -- ac_max_sed_lines=48 -- ac_sed_frag=1 # Number of current file. -- ac_beg=1 # First line for current file. -- ac_end=$ac_max_sed_lines # Line after last line for current file. -- ac_more_lines=: -- ac_sed_cmds= -- while $ac_more_lines; do -- if test $ac_beg -gt 1; then -- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag -- else -- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag -- fi -- if test ! -s $tmp/subs.frag; then -- ac_more_lines=false -- else -- # The purpose of the label and of the branching condition is to -- # speed up the sed processing (if there are no `@' at all, there -- # is no need to browse any of the substitutions). -- # These are the two extra sed commands mentioned above. -- (echo ':t -- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed -- if test -z "$ac_sed_cmds"; then -- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" -- else -- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" -- fi -- ac_sed_frag=`expr $ac_sed_frag + 1` -- ac_beg=$ac_end -- ac_end=`expr $ac_end + $ac_max_sed_lines` -- fi -- done -- if test -z "$ac_sed_cmds"; then -- ac_sed_cmds=cat +-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case "`/usr/bin/file conftest.o`" in +- *32-bit*) +- case $host in +- x86_64-*linux*) +- LD="${LD-ld} -m elf_i386" +- ;; +- ppc64-*linux*|powerpc64-*linux*) +- LD="${LD-ld} -m elf32ppclinux" +- ;; +- s390x-*linux*) +- LD="${LD-ld} -m elf_s390" +- ;; +- sparc64-*linux*) +- LD="${LD-ld} -m elf32_sparc" +- ;; +- esac +- ;; +- *64-bit*) +- case $host in +- x86_64-*linux*) +- LD="${LD-ld} -m elf_x86_64" +- ;; +- ppc*-*linux*|powerpc*-*linux*) +- LD="${LD-ld} -m elf64ppc" +- ;; +- s390*-*linux*) +- LD="${LD-ld} -m elf64_s390" +- ;; +- sparc*-*linux*) +- LD="${LD-ld} -m elf64_sparc" +- ;; +- esac +- ;; +- esac - fi --fi # test -n "$CONFIG_FILES" -+# Commands used to build a shared archive. -+archive_cmds=$lt_archive_cmds_CXX -+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX +- rm -rf conftest* +- ;; --_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF --for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue -- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". -- case $ac_file in -- - | *:- | *:-:* ) # input from stdin -- cat >$tmp/stdin -- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- * ) ac_file_in=$ac_file.in ;; -- esac -+# Commands used to build a loadable module if different from building -+# a shared archive. -+module_cmds=$lt_module_cmds_CXX -+module_expsym_cmds=$lt_module_expsym_cmds_CXX +-*-*-sco3.2v5*) +- # On SCO OpenServer 5, we need -belf to get full-featured binaries. +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -belf" +- echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 +-if test "${lt_cv_cc_needs_belf+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu -- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. -- ac_dir=`(dirname "$ac_file") 2>/dev/null || --$as_expr X"$ac_file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -- X"$ac_file" : 'X$//$[^/]' \| \ -- X"$ac_file" : 'X$//$$' \| \ -- X"$ac_file" : 'X$/$' \| \ -- . : '$.$' 2>/dev/null || --echo X"$ac_file" | -- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X$\/\/$[^/].*/{ s//\1/; q; } -- /^X$\/\/$$/{ s//\1/; q; } -- /^X$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -- as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || --$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -- X"$as_dir" : 'X$//$[^/]' \| \ -- X"$as_dir" : 'X$//$$' \| \ -- X"$as_dir" : 'X$/$' \| \ -- . : '$.$' 2>/dev/null || --echo X"$as_dir" | -- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X$\/\/$[^/].*/{ s//\1/; q; } -- /^X$\/\/$$/{ s//\1/; q; } -- /^X$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` -- done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -- { (exit 1); exit 1; }; }; } -+# Whether we are building with GNU ld or not. -+with_gnu_ld=$lt_with_gnu_ld_CXX +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ -- ac_builddir=. -+# Flag that allows shared libraries with undefined symbols to be built. -+allow_undefined_flag=$lt_allow_undefined_flag_CXX +-int +-main () +-{ --if test "$ac_dir" != .; then -- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- lt_cv_cc_needs_belf=yes -else -- ac_dir_suffix= ac_top_builddir= +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-lt_cv_cc_needs_belf=no -fi -+# Flag that enforces no undefined symbols. -+no_undefined_flag=$lt_no_undefined_flag_CXX +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +- ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu --case $srcdir in -- .) # No --srcdir option. We are building in place. -- ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -- ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac -+# Flag to hardcode \$libdir into a binary during linking. -+# This must work even if \$libdir does not exist -+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX +-fi +-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 +- if test x"$lt_cv_cc_needs_belf" != x"yes"; then +- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +- CFLAGS="$SAVE_CFLAGS" +- fi +- ;; --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; --esac -+# If ld is used when linking, flag to hardcode \$libdir into a binary -+# during linking. This must work even if \$libdir does not exist. -+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX ++ ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 ++$as_echo_n "checking for $LD option to reload object files... " >&6; } ++if test "${lt_cv_ld_reload_flag+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_ld_reload_flag='-r' ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 ++$as_echo "$lt_cv_ld_reload_flag" >&6; } ++reload_flag=$lt_cv_ld_reload_flag ++case $reload_flag in ++"" | " "*) ;; ++*) reload_flag=" $reload_flag" ;; ++esac ++reload_cmds='$LD$reload_flag -o $output$reload_objs' ++case $host_os in ++ darwin*) ++ if test "$GCC" = yes; then ++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' ++ else ++ reload_cmds='$LD$reload_flag -o $output$reload_objs' ++ fi ++ ;; + esac -+# Whether we need a single "-rpath" flag with a separated argument. -+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX +-need_locks="$enable_libtool_lock" -- case $INSTALL in -- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; -- *) ac_INSTALL=$ac_top_builddir$INSTALL ;; -- esac -+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -+# DIR into the resulting binary. -+hardcode_direct=$hardcode_direct_CXX -- if test x"$ac_file" != x-; then -- { echo "$as_me:$LINENO: creating $ac_file" >&5 --echo "$as_me: creating $ac_file" >&6;} -- rm -f "$ac_file" -- fi -- # Let's still pretend it is `configure' which instantiates (i.e., don't -- # use $as_me), people would be surprised to read: -- # /* config.h. Generated by config.status. */ -- if test x"$ac_file" = x-; then -- configure_input= -- else -- configure_input="$ac_file. " -- fi -- configure_input=$configure_input"Generated from `echo $ac_file_in | -- sed 's,.*/,,'` by configure." -+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -+# DIR into the resulting binary and the resulting library dependency is -+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -+# library is relocated. -+hardcode_direct_absolute=$hardcode_direct_absolute_CXX -- # First look for the input files in the build tree, otherwise in the -- # src tree. -- ac_file_inputs=`IFS=: -- for f in $ac_file_in; do -- case $f in -- -) echo $tmp/stdin ;; -- [\\/$]*) -- # Absolute (can't be DOS-style, as IFS=:) -- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -- { (exit 1); exit 1; }; } -- echo "$f";; -- *) # Relative -- if test -f "$f"; then -- # Build tree -- echo "$f" -- elif test -f "$srcdir/$f"; then -- # Source tree -- echo "$srcdir/$f" -- else -- # /dev/null tree -- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -- { (exit 1); exit 1; }; } -- fi;; -- esac -- done` || { (exit 1); exit 1; } +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +-if test "${ac_cv_header_stdc+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ -_ACEOF --cat >>$CONFIG_STATUS <<_ACEOF -- sed "$ac_vpsub --$extrasub +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-#include +-#include +-#include + +-int +-main () +-{ + +- ; +- return 0; +-} -_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF --:t --/@[a-zA-Z_][a-zA-Z_0-9]*@/!b --s,@configure_input@,$configure_input,;t t --s,@srcdir@,$ac_srcdir,;t t --s,@abs_srcdir@,$ac_abs_srcdir,;t t --s,@top_srcdir@,$ac_top_srcdir,;t t --s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t --s,@builddir@,$ac_builddir,;t t --s,@abs_builddir@,$ac_abs_builddir,;t t --s,@top_builddir@,$ac_top_builddir,;t t --s,@abs_top_builddir@,$ac_abs_top_builddir,;t t --s,@INSTALL@,$ac_INSTALL,;t t --" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out -- rm -f $tmp/stdin -- if test x"$ac_file" != x-; then -- mv $tmp/out $ac_file -- else -- cat $tmp/out -- rm -f $tmp/out -- fi -+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -+# into the resulting binary. -+hardcode_minus_L=$hardcode_minus_L_CXX +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_header_stdc=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 --done +-ac_cv_header_stdc=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +-if test $ac_cv_header_stdc = yes; then +- # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include + +-_ACEOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "memchr" >/dev/null 2>&1; then +- : ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. ++set dummy ${ac_tool_prefix}objdump; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_OBJDUMP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- ac_cv_header_stdc=no +-fi +-rm -f conftest* ++ if test -n "$OBJDUMP"; then ++ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS + + fi +- +-if test $ac_cv_header_stdc = yes; then +- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +- +-_ACEOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "free" >/dev/null 2>&1; then +- : ++fi ++OBJDUMP=$ac_cv_prog_OBJDUMP ++if test -n "$OBJDUMP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 ++$as_echo "$OBJDUMP" >&6; } + else +- ac_cv_header_stdc=no ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi +-rm -f conftest* + +-fi + +-if test $ac_cv_header_stdc = yes; then +- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +- if test "$cross_compiling" = yes; then +- : ++fi ++if test -z "$ac_cv_prog_OBJDUMP"; then ++ ac_ct_OBJDUMP=$OBJDUMP ++ # Extract the first word of "objdump", so it can be a program name with args. ++set dummy objdump; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-#if ((' ' & 0x0FF) == 0x020) +-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +-#else +-# define ISLOWER(c) \ +- (('a' <= (c) && (c) <= 'i') \ +- || ('j' <= (c) && (c) <= 'r') \ +- || ('s' <= (c) && (c) <= 'z')) +-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +-#endif +- +-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +-int +-main () +-{ +- int i; +- for (i = 0; i < 256; i++) +- if (XOR (islower (i), ISLOWER (i)) +- || toupper (i) != TOUPPER (i)) +- exit(2); +- exit (0); +-} +-_ACEOF +-rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : ++ if test -n "$ac_ct_OBJDUMP"; then ++ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. + else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OBJDUMP="objdump" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS + +-( exit $ac_status ) +-ac_cv_header_stdc=no +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + fi ++ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP ++if test -n "$ac_ct_OBJDUMP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 ++$as_echo "$ac_ct_OBJDUMP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6 +-if test $ac_cv_header_stdc = yes; then +- +-cat >>confdefs.h <<\_ACEOF +-#define STDC_HEADERS 1 -_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF -+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -+# into the resulting binary. -+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX --# --# CONFIG_HEADER section. --# -+# Set to "yes" if building a shared library automatically hardcodes DIR -+# into the library and all subsequent libraries and executables linked -+# against it. -+hardcode_automatic=$hardcode_automatic_CXX ++ if test "x$ac_ct_OBJDUMP" = x; then ++ OBJDUMP="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ OBJDUMP=$ac_ct_OBJDUMP ++ fi ++else ++ OBJDUMP="$ac_cv_prog_OBJDUMP" + fi --# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where --# NAME is the cpp macro being defined and VALUE is the value it is being given. --# --# ac_d sets the value in "#define NAME VALUE" lines. --ac_dA='s,^$[ ]*$#$[ ]*define[ ][ ]*$' --ac_dB='[ ].*$,\1#\2' --ac_dC=' ' --ac_dD=',;t' --# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". --ac_uA='s,^$[ ]*$#$[ ]*$undef$[ ][ ]*$' --ac_uB='$,\1#\2define\3' --ac_uC=' ' --ac_uD=',;t' -+# Set to yes if linker adds runtime paths of dependent libraries -+# to runtime path list. -+inherit_rpath=$inherit_rpath_CXX +-# On IRIX 5.3, sys/types and inttypes.h are conflicting. ++test -z "$OBJDUMP" && OBJDUMP=objdump --for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue -- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". -- case $ac_file in -- - | *:- | *:-:* ) # input from stdin -- cat >$tmp/stdin -- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- * ) ac_file_in=$ac_file.in ;; -- esac -+# Whether libtool must link a program against all its dependency libraries. -+link_all_deplibs=$link_all_deplibs_CXX -- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 --echo "$as_me: creating $ac_file" >&6;} -+# Fix the shell variable \$srcfile for the compiler. -+fix_srcfile_path=$lt_fix_srcfile_path_CXX -- # First look for the input files in the build tree, otherwise in the -- # src tree. -- ac_file_inputs=`IFS=: -- for f in $ac_file_in; do -- case $f in -- -) echo $tmp/stdin ;; -- [\\/$]*) -- # Absolute (can't be DOS-style, as IFS=:) -- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -- { (exit 1); exit 1; }; } -- # Do quote $f, to prevent DOS paths from being IFS'd. -- echo "$f";; -- *) # Relative -- if test -f "$f"; then -- # Build tree -- echo "$f" -- elif test -f "$srcdir/$f"; then -- # Source tree -- echo "$srcdir/$f" -- else -- # /dev/null tree -- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -- { (exit 1); exit 1; }; } -- fi;; -- esac -- done` || { (exit 1); exit 1; } -- # Remove the trailing spaces. -- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in -+# Set to "yes" if exported symbols are required. -+always_export_symbols=$always_export_symbols_CXX +@@ -4697,804 +5618,610 @@ fi + + +-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ +- inttypes.h stdint.h unistd.h +-do +-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 ++$as_echo_n "checking how to recognize dependent libraries... " >&6; } ++if test "${lt_cv_deplibs_check_method+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ -_ACEOF -+# The commands to list exported symbols. -+export_symbols_cmds=$lt_export_symbols_cmds_CXX +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default ++ lt_cv_file_magic_cmd='$MAGIC_CMD' ++lt_cv_file_magic_test_file= ++lt_cv_deplibs_check_method='unknown' ++# Need to set the preceding variable on all platforms that support ++# interlibrary dependencies. ++# 'none' -- dependencies not supported. ++# `unknown' -- same as none, but documents that we really don't know. ++# 'pass_all' -- all dependencies passed with no checks. ++# 'test_compile' -- check by making test program. ++# 'file_magic [[regex]]' -- check by looking for files in library path ++# which responds to the $file_magic_cmd with a given extended regex. ++# If you have `file' or equivalent on your system and you're not sure ++# whether `pass_all' will *always* work, you probably want this one. --# Transform confdefs.h into two sed scripts, `conftest.defines' and --# `conftest.undefs', that substitutes the proper values into --# config.h.in to produce config.h. The first handles `#define' --# templates, and the second `#undef' templates. --# And first: Protect against being on the right side of a sed subst in --# config.status. Protect against being in an unquoted here document --# in config.status. --rm -f conftest.defines conftest.undefs --# Using a here document instead of a string reduces the quoting nightmare. --# Putting comments in sed scripts is not portable. --# --# `end' is used to avoid that the second main sed command (meant for --# 0-ary CPP macros) applies to n-ary macro definitions. --# See the Autoconf documentation for `clear'. --cat >confdef2sed.sed <<\_ACEOF --s/[\\&,]/\\&/g --s,[\\$`],\\&,g --t clear --: clear --s,^[ ]*#[ ]*define[ ][ ]*$[^ (][^ (]*$$([^)]*)$[ ]*$.*$$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp --t end --s,^[ ]*#[ ]*define[ ][ ]*$[^ ][^ ]*$[ ]*$.*$$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp --: end +-#include <$ac_header> -_ACEOF --# If some macros were called several times there might be several times --# the same #defines, which is useless. Nevertheless, we may not want to --# sort them, since we want the *last* AC-DEFINE to be honored. --uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines --sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs --rm -f confdef2sed.sed +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- eval "$as_ac_Header=yes" +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 - --# This sed command replaces #undef with comments. This is necessary, for --# example, in the case of _POSIX_SOURCE, which is predefined and required --# on some systems where configure will not decide to define it. --cat >>conftest.undefs <<\_ACEOF --s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +-eval "$as_ac_Header=no" +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +-if test `eval echo '${'$as_ac_Header'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF -- --# Break up conftest.defines because some shells have a limit on the size --# of here documents, and old seds have small limits too (100 cmds). --echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS --echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS --echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS --echo ' :' >>$CONFIG_STATUS --rm -f conftest.tail --while grep . conftest.defines >/dev/null --do -- # Write a limited-size here document to $tmp/defines.sed. -- echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS -- # Speed up: don't consider the non `#define' lines. -- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS -- # Work around the forget-to-reset-the-flag bug. -- echo 't clr' >>$CONFIG_STATUS -- echo ': clr' >>$CONFIG_STATUS -- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS -- echo 'CEOF -- sed -f $tmp/defines.sed $tmp/in >$tmp/out -- rm -f $tmp/in -- mv $tmp/out $tmp/in --' >>$CONFIG_STATUS -- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail -- rm -f conftest.defines -- mv conftest.tail conftest.defines ++case $host_os in ++aix[4-9]*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-fi ++beos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + -done --rm -f conftest.defines --echo ' fi # grep' >>$CONFIG_STATUS --echo >>$CONFIG_STATUS -- --# Break up conftest.undefs because some shells have a limit on the size --# of here documents, and old seds have small limits too (100 cmds). --echo ' # Handle all the #undef templates' >>$CONFIG_STATUS --rm -f conftest.tail --while grep . conftest.undefs >/dev/null ++bsdi[45]*) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' ++ lt_cv_file_magic_cmd='/usr/bin/file -L' ++ lt_cv_file_magic_test_file=/shlib/libc.so ++ ;; + ++cygwin*) ++ # func_win32_libid is a shell function defined in ltmain.sh ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ ;; + ++mingw* | pw32*) ++ # Base MSYS/MinGW do not provide the 'file' command needed by ++ # func_win32_libid shell function, so use a weaker test based on 'objdump', ++ # unless we find 'file', for example because we are cross-compiling. ++ if ( file / ) >/dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ else ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ fi ++ ;; + +-for ac_header in dlfcn.h -do -- # Write a limited-size here document to $tmp/undefs.sed. -- echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS -- # Speed up: don't consider the non `#undef' -- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS -- # Work around the forget-to-reset-the-flag bug. -- echo 't clr' >>$CONFIG_STATUS -- echo ': clr' >>$CONFIG_STATUS -- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS -- echo 'CEOF -- sed -f $tmp/undefs.sed $tmp/in >$tmp/out -- rm -f $tmp/in -- mv $tmp/out $tmp/in --' >>$CONFIG_STATUS -- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail -- rm -f conftest.undefs -- mv conftest.tail conftest.undefs --done --rm -f conftest.undefs -- --cat >>$CONFIG_STATUS <<\_ACEOF -- # Let's still pretend it is `configure' which instantiates (i.e., don't -- # use $as_me), people would be surprised to read: -- # /* config.h. Generated by config.status. */ -- if test x"$ac_file" = x-; then -- echo "/* Generated by configure. */" >$tmp/config.h -- else -- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h -- fi -- cat $tmp/in >>$tmp/config.h -- rm -f $tmp/in -- if test x"$ac_file" != x-; then -- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then -- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 --echo "$as_me: $ac_file is unchanged" >&6;} -- else -- ac_dir=`(dirname "$ac_file") 2>/dev/null || --$as_expr X"$ac_file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -- X"$ac_file" : 'X$//$[^/]' \| \ -- X"$ac_file" : 'X$//$$' \| \ -- X"$ac_file" : 'X$/$' \| \ -- . : '$.$' 2>/dev/null || --echo X"$ac_file" | -- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X$\/\/$[^/].*/{ s//\1/; q; } -- /^X$\/\/$$/{ s//\1/; q; } -- /^X$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -- as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || --$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -- X"$as_dir" : 'X$//$[^/]' \| \ -- X"$as_dir" : 'X$//$$' \| \ -- X"$as_dir" : 'X$/$' \| \ -- . : '$.$' 2>/dev/null || --echo X"$as_dir" | -- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X$\/\/$[^/].*/{ s//\1/; q; } -- /^X$\/\/$$/{ s//\1/; q; } -- /^X$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` -- done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -- { (exit 1); exit 1; }; }; } -+# Symbols that should not be listed in the preloaded symbols. -+exclude_expsyms=$lt_exclude_expsyms_CXX +-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +-else +- # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_header_compiler=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++cegcc) ++ # use the weaker test based on 'objdump'. See mingw*. ++ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ ;; + +-ac_header_compiler=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++darwin* | rhapsody*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-# Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include <$ac_header> +-_ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag ++freebsd* | dragonfly*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ case $host_cpu in ++ i*86 ) ++ # Not sure whether the presence of OpenBSD here was a mistake. ++ # Let's accept both of them until this is cleared up. ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++ ;; ++ esac + else +- ac_cpp_err= ++ lt_cv_deplibs_check_method=pass_all + fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then +- ac_header_preproc=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ;; + +- ac_header_preproc=no +-fi +-rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++gnu*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes ++hpux10.20* | hpux11*) ++ lt_cv_file_magic_cmd=/usr/bin/file ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; +- no:yes:* ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## --------------------------------------------- ## +-## Report this to the I2O RAID Utilities lists. ## +-## --------------------------------------------- ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ hppa*64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; +-esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- eval "$as_ac_Header=\$ac_header_preproc" +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ *) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ ;; ++ esac ++ ;; -- rm -f $ac_file -- mv $tmp/config.h $ac_file -- fi -- else -- cat $tmp/config.h -- rm -f $tmp/config.h -- fi --# Compute $ac_file's index in $config_headers. --_am_stamp_count=1 --for _am_header in $config_headers :; do -- case $_am_header in -- $ac_file | $ac_file:* ) -- break ;; -- * ) -- _am_stamp_count=`expr $_am_stamp_count + 1` ;; -- esac --done --echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || --$as_expr X$ac_file : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -- X$ac_file : 'X$//$[^/]' \| \ -- X$ac_file : 'X$//$$' \| \ -- X$ac_file : 'X$/$' \| \ -- . : '$.$' 2>/dev/null || --echo X$ac_file | -- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X$\/\/$[^/].*/{ s//\1/; q; } -- /^X$\/\/$$/{ s//\1/; q; } -- /^X$\/$.*/{ s//\1/; q; } -- s/.*/./; q'`/stamp-h$_am_stamp_count --done +-fi +-if test `eval echo '${'$as_ac_Header'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF -+# Symbols that must always be exported. -+include_expsyms=$lt_include_expsyms_CXX ++interix[3-9]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ++ ;; --# --# CONFIG_COMMANDS section. --# --for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue -- ac_dest=`echo "$ac_file" | sed 's,:.*,,'` -- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_dir=`(dirname "$ac_dest") 2>/dev/null || --$as_expr X"$ac_dest" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -- X"$ac_dest" : 'X$//$[^/]' \| \ -- X"$ac_dest" : 'X$//$$' \| \ -- X"$ac_dest" : 'X$/$' \| \ -- . : '$.$' 2>/dev/null || --echo X"$ac_dest" | -- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X$\/\/$[^/].*/{ s//\1/; q; } -- /^X$\/\/$$/{ s//\1/; q; } -- /^X$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -- as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || --$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -- X"$as_dir" : 'X$//$[^/]' \| \ -- X"$as_dir" : 'X$//$$' \| \ -- X"$as_dir" : 'X$/$' \| \ -- . : '$.$' 2>/dev/null || --echo X"$as_dir" | -- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X$\/\/$[^/].*/{ s//\1/; q; } -- /^X$\/\/$$/{ s//\1/; q; } -- /^X$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` -- done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -- { (exit 1); exit 1; }; }; } -+# Commands necessary for linking programs (against libraries) with templates. -+prelink_cmds=$lt_prelink_cmds_CXX +-fi ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac ++ lt_cv_deplibs_check_method=pass_all ++ ;; -- ac_builddir=. -+# Specify filename containing input files. -+file_list_spec=$lt_file_list_spec_CXX +-done ++# This must be Linux ELF. ++linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ lt_cv_deplibs_check_method=pass_all ++ ;; --if test "$ac_dir" != .; then -- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-ac_ext=cc +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 +-if test -z "$CXXCPP"; then +- if test "${ac_cv_prog_CXXCPP+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 -else -- ac_dir_suffix= ac_top_builddir= +- # Double quotes because CXXCPP needs to be expanded +- for CXXCPP in "$CXX -E" "/lib/cpp" +- do +- ac_preproc_ok=false +-for ac_cxx_preproc_warn_flag in '' yes +-do +- # Use a header file that comes with gcc, so configuring glibc +- # with a fresh cross-compiler works. +- # Prefer to if __STDC__ is defined, since +- # exists even on freestanding compilers. +- # On the NeXT, cc -E runs the code through the compiler's parser, +- # not just through cpp. "Syntax error" is here to catch this case. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- Syntax error +-_ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else +- ac_cpp_err= ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi +-else +- ac_cpp_err=yes -fi -+# How to hardcode a shared library path into an executable. -+hardcode_action=$hardcode_action_CXX +-if test -z "$ac_cpp_err"; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ;; --case $srcdir in -- .) # No --srcdir option. We are building in place. -- ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -- ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac -+# The directories searched by this compiler when creating a shared library. -+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX +- # Broken: fails on valid input. +-continue +-fi +-rm -f conftest.err conftest.$ac_ext ++newos6*) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=/usr/lib/libnls.so ++ ;; --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; --esac -+# Dependencies to place before and after the objects being linked to -+# create a shared library. -+predep_objects=$lt_predep_objects_CXX -+postdep_objects=$lt_postdep_objects_CXX -+predeps=$lt_predeps_CXX -+postdeps=$lt_postdeps_CXX +- # OK, works on sane cases. Now check whether non-existent headers +- # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag ++*nto* | *qnx*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else +- ac_cpp_err= ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then +- # Broken: success on invalid input. +-continue +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- # Passes both tests. +-ac_preproc_ok=: +-break +-fi +-rm -f conftest.err conftest.$ac_ext ++ ;; -+# The library search path used internally by the compiler when linking -+# a shared library. -+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX +-done +-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +-rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then +- break +-fi ++osf3* | osf4* | osf5*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; -- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 --echo "$as_me: executing $ac_dest commands" >&6;} -- case $ac_dest in -- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do -- # Strip MF so we end up with the name of the file. -- mf=`echo "$mf" | sed -e 's/:.*$//'` -- # Check whether this is an Automake generated Makefile or not. -- # We used to match only the files named `Makefile.in', but -- # some people rename them; so instead we look at the file content. -- # Grep'ing the first line is not enough: some people post-process -- # each Makefile.in and add a new line on top of each file to say so. -- # So let's grep whole file. -- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then -- dirpart=`(dirname "$mf") 2>/dev/null || --$as_expr X"$mf" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -- X"$mf" : 'X$//$[^/]' \| \ -- X"$mf" : 'X$//$$' \| \ -- X"$mf" : 'X$/$' \| \ -- . : '$.$' 2>/dev/null || --echo X"$mf" | -- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X$\/\/$[^/].*/{ s//\1/; q; } -- /^X$\/\/$$/{ s//\1/; q; } -- /^X$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` +- done +- ac_cv_prog_CXXCPP=$CXXCPP ++rdos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +-fi +- CXXCPP=$ac_cv_prog_CXXCPP +-else +- ac_cv_prog_CXXCPP=$CXXCPP +-fi +-echo "$as_me:$LINENO: result: $CXXCPP" >&5 +-echo "${ECHO_T}$CXXCPP" >&6 +-ac_preproc_ok=false +-for ac_cxx_preproc_warn_flag in '' yes +-do +- # Use a header file that comes with gcc, so configuring glibc +- # with a fresh cross-compiler works. +- # Prefer to if __STDC__ is defined, since +- # exists even on freestanding compilers. +- # On the NeXT, cc -E runs the code through the compiler's parser, +- # not just through cpp. "Syntax error" is here to catch this case. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- Syntax error +-_ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else -- continue +- ac_cpp_err= - fi -- # Extract the definition of DEPDIR, am__include, and am__quote -- # from the Makefile without running `make'. -- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` -- test -z "$DEPDIR" && continue -- am__include=`sed -n 's/^am__include = //p' < "$mf"` -- test -z "am__include" && continue -- am__quote=`sed -n 's/^am__quote = //p' < "$mf"` -- # When using ansi2knr, U may be empty or an underscore; expand it -- U=`sed -n 's/^U = //p' < "$mf"` -- # Find all dependency output files, they are included files with -- # $(DEPDIR) in their names. We invoke sed twice because it is the -- # simplest approach to changing $(DEPDIR) to its actual value in the -- # expansion. -- for file in `sed -n " -- s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \ -- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do -- # Make sure the directory exists. -- test -f "$dirpart/$file" && continue -- fdir=`(dirname "$file") 2>/dev/null || --$as_expr X"$file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -- X"$file" : 'X$//$[^/]' \| \ -- X"$file" : 'X$//$$' \| \ -- X"$file" : 'X$/$' \| \ -- . : '$.$' 2>/dev/null || --echo X"$file" | -- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X$\/\/$[^/].*/{ s//\1/; q; } -- /^X$\/\/$$/{ s//\1/; q; } -- /^X$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p $dirpart/$fdir +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++solaris*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +- # Broken: fails on valid input. +-continue +-fi +-rm -f conftest.err conftest.$ac_ext ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +- # OK, works on sane cases. Now check whether non-existent headers +- # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else -- as_dir=$dirpart/$fdir -- as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || --$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ -- X"$as_dir" : 'X$//$[^/]' \| \ -- X"$as_dir" : 'X$//$$' \| \ -- X"$as_dir" : 'X$/$' \| \ -- . : '$.$' 2>/dev/null || --echo X"$as_dir" | -- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X$\/\/$[^/].*/{ s//\1/; q; } -- /^X$\/\/$$/{ s//\1/; q; } -- /^X$\/$.*/{ s//\1/; q; } -- s/.*/./; q'` -- done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 --echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} -- { (exit 1); exit 1; }; }; } -+# ### END LIBTOOL TAG CONFIG: CXX -+_LT_EOF +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then +- # Broken: success on invalid input. +-continue +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++sysv4 | sysv4.3*) ++ case $host_vendor in ++ motorola) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ ;; ++ ncr) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ sequent) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ++ ;; ++ sni) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" ++ lt_cv_file_magic_test_file=/lib/libc.so ++ ;; ++ siemens) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ esac ++ ;; + +- # Passes both tests. +-ac_preproc_ok=: +-break +-fi +-rm -f conftest.err conftest.$ac_ext ++tpf*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++esac -- # echo "creating $dirpart/$file" -- echo '# dummy' > "$dirpart/$file" -- done -done - ;; +-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +-rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then +- : +-else +- { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check +-See \`config.log' for more details." >&5 +-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 ++$as_echo "$lt_cv_deplibs_check_method" >&6; } ++file_magic_cmd=$lt_cv_file_magic_cmd ++deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown ++ ++ ++ ++ ++ ++ ++ ++ + - esac --done --_ACEOF -+done # for ac_tag --cat >>$CONFIG_STATUS <<\_ACEOF +-ac_ext=cc +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu --{ (exit 0); exit 0; } -+as_fn_exit 0 - _ACEOF --chmod +x $CONFIG_STATUS - ac_clean_files=$ac_clean_files_save -+test $ac_write_fail = 0 || -+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 -+ +-ac_ext=f +-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_f77_compiler_gnu + if test -n "$ac_tool_prefix"; then +- for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran +- do +- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +-set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_F77+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ar; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_AR+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- if test -n "$F77"; then +- ac_cv_prog_F77="$F77" # Let the user override the test. ++ if test -n "$AR"; then ++ ac_cv_prog_AR="$AR" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_F77="$ac_tool_prefix$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AR="${ac_tool_prefix}ar" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done ++IFS=$as_save_IFS - # configure is writing to config.log, and then calls config.status. - # config.status does its own redirection, appending to config.log. -@@ -23856,6 +18568,10 @@ if test "$no_create" != yes; then - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. -- $ac_cs_success || { (exit 1); exit 1; } -+ $ac_cs_success || as_fn_exit 1 -+fi -+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then -+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} + fi + fi +-F77=$ac_cv_prog_F77 +-if test -n "$F77"; then +- echo "$as_me:$LINENO: result: $F77" >&5 +-echo "${ECHO_T}$F77" >&6 ++AR=$ac_cv_prog_AR ++if test -n "$AR"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 ++$as_echo "$AR" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } fi ---- raidutils-0.0.6.orig/lib/Makefile.in -+++ raidutils-0.0.6/lib/Makefile.in -@@ -1,8 +1,9 @@ --# Makefile.in generated by automake 1.9.2 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ - - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, --# 2003, 2004 Free Software Foundation, Inc. -+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -+# Inc. - # This Makefile.in is free software; the Free Software Foundation - # gives unlimited permission to copy and/or distribute it, - # with or without modifications, as long as this notice is preserved. -@@ -14,17 +15,12 @@ +- test -n "$F77" && break +- done ++ + fi +-if test -z "$F77"; then +- ac_ct_F77=$F77 +- for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran +-do +- # Extract the first word of "$ac_prog", so it can be a program name with args. +-set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++if test -z "$ac_cv_prog_AR"; then ++ ac_ct_AR=$AR ++ # Extract the first word of "ar", so it can be a program name with args. ++set dummy ar; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- if test -n "$ac_ct_F77"; then +- ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. ++ if test -n "$ac_ct_AR"; then ++ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_F77="$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_AR="ar" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done ++IFS=$as_save_IFS - @SET_MAKE@ + fi + fi +-ac_ct_F77=$ac_cv_prog_ac_ct_F77 +-if test -n "$ac_ct_F77"; then +- echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 +-echo "${ECHO_T}$ac_ct_F77" >&6 ++ac_ct_AR=$ac_cv_prog_ac_ct_AR ++if test -n "$ac_ct_AR"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 ++$as_echo "$ac_ct_AR" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi --SOURCES = $(libraidutil_la_SOURCES) +- test -n "$ac_ct_F77" && break +-done - --srcdir = @srcdir@ --top_srcdir = @top_srcdir@ - VPATH = @srcdir@ - pkgdatadir = $(datadir)/@PACKAGE@ --pkglibdir = $(libdir)/@PACKAGE@ - pkgincludedir = $(includedir)/@PACKAGE@ --top_builddir = .. -+pkglibdir = $(libdir)/@PACKAGE@ -+pkglibexecdir = $(libexecdir)/@PACKAGE@ - am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd --INSTALL = @INSTALL@ - install_sh_DATA = $(install_sh) -c -m 644 - install_sh_PROGRAM = $(install_sh) -c - install_sh_SCRIPT = $(install_sh) -c -@@ -47,14 +43,29 @@ am__configure_deps = $(am__aclocal_m4_de - mkinstalldirs = $(install_sh) -d - CONFIG_HEADER = $(top_builddir)/config.h - CONFIG_CLEAN_FILES = -+CONFIG_CLEAN_VPATH_FILES = - am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; - am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; --am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; -+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -+am__install_max = 40 -+am__nobase_strip_setup = \ -+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -+am__nobase_strip = \ -+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -+am__nobase_list = $(am__nobase_strip_setup); \ -+ for p in $$list; do echo "$$p $$p"; done | \ -+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \ -+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ -+ if (++n[$$2] == $(am__install_max)) \ -+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ -+ END { for (dir in files) print dir, files[dir] }' -+am__base_list = \ -+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ -+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' - am__installdirs = "$(DESTDIR)$(libdir)" --libLTLIBRARIES_INSTALL = $(INSTALL) - LTLIBRARIES = $(lib_LTLIBRARIES) - libraidutil_la_LIBADD = - am_libraidutil_la_OBJECTS = libraidutil_la-ctlr_map.lo \ -@@ -64,33 +75,34 @@ am_libraidutil_la_OBJECTS = libraidutil_ - libraidutil_la-lockunix.lo libraidutil_la-scsi_log.lo \ - libraidutil_la-dptalign.lo - libraidutil_la_OBJECTS = $(am_libraidutil_la_OBJECTS) --DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) -+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) - depcomp = $(SHELL) $(top_srcdir)/depcomp - am__depfiles_maybe = depfiles -+am__mv = mv -f - COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) --LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ -- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ -- $(AM_CFLAGS) $(CFLAGS) -+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ -+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ -+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) - CCLD = $(CC) --LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ -- $(AM_LDFLAGS) $(LDFLAGS) -o $@ -+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ -+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ -+ $(LDFLAGS) -o $@ - CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) --LTCXXCOMPILE = $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) \ -- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ -- $(AM_CXXFLAGS) $(CXXFLAGS) -+LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ -+ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ -+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) - CXXLD = $(CXX) --CXXLINK = $(LIBTOOL) --mode=link --tag=CXX $(CXXLD) $(AM_CXXFLAGS) \ -- $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -+CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ -+ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ -+ $(LDFLAGS) -o $@ - SOURCES = $(libraidutil_la_SOURCES) - DIST_SOURCES = $(libraidutil_la_SOURCES) - ETAGS = etags - CTAGS = ctags - DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - ACLOCAL = @ACLOCAL@ --AMDEP_FALSE = @AMDEP_FALSE@ --AMDEP_TRUE = @AMDEP_TRUE@ - AMTAR = @AMTAR@ - AR = @AR@ - AUTOCONF = @AUTOCONF@ -@@ -109,48 +121,57 @@ CXXFLAGS = @CXXFLAGS@ - CYGPATH_W = @CYGPATH_W@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ --ECHO = @ECHO@ -+DSYMUTIL = @DSYMUTIL@ -+DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ - ECHO_N = @ECHO_N@ - ECHO_T = @ECHO_T@ - EGREP = @EGREP@ - EXEEXT = @EXEEXT@ --F77 = @F77@ --FFLAGS = @FFLAGS@ -+FGREP = @FGREP@ -+GREP = @GREP@ -+INSTALL = @INSTALL@ - INSTALL_DATA = @INSTALL_DATA@ - INSTALL_PROGRAM = @INSTALL_PROGRAM@ - INSTALL_SCRIPT = @INSTALL_SCRIPT@ - INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -+LD = @LD@ - LDFLAGS = @LDFLAGS@ - LIBOBJS = @LIBOBJS@ - LIBS = @LIBS@ - LIBTOOL = @LIBTOOL@ -+LIPO = @LIPO@ - LN_S = @LN_S@ - LTLIBOBJS = @LTLIBOBJS@ - MAKEINFO = @MAKEINFO@ -+MKDIR_P = @MKDIR_P@ -+NM = @NM@ -+NMEDIT = @NMEDIT@ -+OBJDUMP = @OBJDUMP@ - OBJEXT = @OBJEXT@ -+OTOOL = @OTOOL@ -+OTOOL64 = @OTOOL64@ - PACKAGE = @PACKAGE@ - PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ - PACKAGE_NAME = @PACKAGE_NAME@ - PACKAGE_STRING = @PACKAGE_STRING@ - PACKAGE_TARNAME = @PACKAGE_TARNAME@ -+PACKAGE_URL = @PACKAGE_URL@ - PACKAGE_VERSION = @PACKAGE_VERSION@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - RANLIB = @RANLIB@ -+SED = @SED@ - SET_MAKE = @SET_MAKE@ - SHELL = @SHELL@ - STRIP = @STRIP@ - VERSION = @VERSION@ --ac_ct_AR = @ac_ct_AR@ -+abs_builddir = @abs_builddir@ -+abs_srcdir = @abs_srcdir@ -+abs_top_builddir = @abs_top_builddir@ -+abs_top_srcdir = @abs_top_srcdir@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ --ac_ct_F77 = @ac_ct_F77@ --ac_ct_RANLIB = @ac_ct_RANLIB@ --ac_ct_STRIP = @ac_ct_STRIP@ --am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ --am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ --am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ --am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ -+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ - am__include = @am__include@ - am__leading_dot = @am__leading_dot@ - am__quote = @am__quote@ -@@ -162,28 +183,41 @@ build_alias = @build_alias@ - build_cpu = @build_cpu@ - build_os = @build_os@ - build_vendor = @build_vendor@ -+builddir = @builddir@ - datadir = @datadir@ -+datarootdir = @datarootdir@ -+docdir = @docdir@ -+dvidir = @dvidir@ - exec_prefix = @exec_prefix@ - host = @host@ - host_alias = @host_alias@ - host_cpu = @host_cpu@ - host_os = @host_os@ - host_vendor = @host_vendor@ -+htmldir = @htmldir@ - includedir = @includedir@ - infodir = @infodir@ - install_sh = @install_sh@ - libdir = @libdir@ - libexecdir = @libexecdir@ -+localedir = @localedir@ - localstatedir = @localstatedir@ -+lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -+pdfdir = @pdfdir@ - prefix = @prefix@ - program_transform_name = @program_transform_name@ -+psdir = @psdir@ - sbindir = @sbindir@ - sharedstatedir = @sharedstatedir@ -+srcdir = @srcdir@ - sysconfdir = @sysconfdir@ - target_alias = @target_alias@ -+top_build_prefix = @top_build_prefix@ -+top_builddir = @top_builddir@ -+top_srcdir = @top_srcdir@ - lib_LTLIBRARIES = libraidutil.la - libraidutil_la_SOURCES = ctlr_map.cpp dpt_buff.cpp engcalls.cpp engmsg.c findpath.c funcs.c hba_log.cpp lockunix.c scsi_log.cpp dptalign.c - libraidutil_la_CPPFLAGS = -O3 -DMESSAGES -D_DPT_ACTIVE_ALIGNMENT -Dtrue=1 -Dfalse=0 -DHORIZONTAL -DNEW_RSC_MGR -DNEW_RSC_HDR -D_DPT_FLASH -DNEW_LOGGER -DI_WANT_SNI_DEBUG -D__UNIX__ -I../include -@@ -195,14 +229,14 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefi - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ -- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ -- && exit 0; \ -+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ -+ && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ -- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \ -- cd $(top_srcdir) && \ -- $(AUTOMAKE) --gnu lib/Makefile -+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \ -+ $(am__cd) $(top_srcdir) && \ -+ $(AUTOMAKE) --gnu lib/Makefile - .PRECIOUS: Makefile - Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ -@@ -220,23 +254,28 @@ $(top_srcdir)/configure: $(am__configur - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - $(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -+$(am__aclocal_m4_deps): - install-libLTLIBRARIES: $(lib_LTLIBRARIES) - @$(NORMAL_INSTALL) -- test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" -- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ -+ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" -+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ -+ list2=; for p in $$list; do \ - if test -f $$p; then \ -- f=$(am__strip_dir) \ -- echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ -- $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ -+ list2="$$list2 $$p"; \ - else :; fi; \ -- done -+ done; \ -+ test -z "$$list2" || { \ -+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ -+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ -+ } +- F77=$ac_ct_F77 ++ if test "x$ac_ct_AR" = x; then ++ AR="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ AR=$ac_ct_AR ++ fi ++else ++ AR="$ac_cv_prog_AR" + fi + ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++ + +-# Provide some information about the compiler. +-echo "$as_me:5235:" \ +- "checking for Fortran 77 compiler version" >&5 +-ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-rm -f a.out +- +-# If we don't use `.F' as extension, the preprocessor is not run on the +-# input file. (Note that this only needs to work for GNU compilers.) +-ac_save_ext=$ac_ext +-ac_ext=F +-echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6 +-if test "${ac_cv_f77_compiler_gnu+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +- program main +-#ifndef __GNUC__ +- choke me +-#endif - uninstall-libLTLIBRARIES: - @$(NORMAL_UNINSTALL) -- @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ -- p=$(am__strip_dir) \ -- echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ -- $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ -+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ -+ for p in $$list; do \ -+ $(am__strip_dir) \ -+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ -+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ - done +- end +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_compiler_gnu=yes ++ ++ ++ ++ ++ ++ ++ ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS - clean-libLTLIBRARIES: -@@ -248,7 +287,7 @@ clean-libLTLIBRARIES: - rm -f "$${dir}/so_locations"; \ - done - libraidutil.la: $(libraidutil_la_OBJECTS) $(libraidutil_la_DEPENDENCIES) -- $(CXXLINK) -rpath $(libdir) $(libraidutil_la_LDFLAGS) $(libraidutil_la_OBJECTS) $(libraidutil_la_LIBADD) $(LIBS) -+ $(CXXLINK) -rpath $(libdir) $(libraidutil_la_OBJECTS) $(libraidutil_la_LIBADD) $(LIBS) +-ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-ac_cv_f77_compiler_gnu=$ac_compiler_gnu +- + fi +-echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6 +-ac_ext=$ac_save_ext +-ac_test_FFLAGS=${FFLAGS+set} +-ac_save_FFLAGS=$FFLAGS +-FFLAGS= +-echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 +-echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6 +-if test "${ac_cv_prog_f77_g+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- FFLAGS=-g +-cat >conftest.$ac_ext <<_ACEOF +- program main +- +- end +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_prog_f77_g=yes ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 ++$as_echo "$STRIP" >&6; } + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_prog_f77_g=no ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ - mostlyclean-compile: - -rm -f *.$(OBJEXT) -@@ -268,116 +307,116 @@ distclean-compile: - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libraidutil_la-scsi_log.Plo@am__quote@ + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_f77_g" >&6 +-if test "$ac_test_FFLAGS" = set; then +- FFLAGS=$ac_save_FFLAGS +-elif test $ac_cv_prog_f77_g = yes; then +- if test "x$ac_cv_f77_compiler_gnu" = xyes; then +- FFLAGS="-g -O2" +- else +- FFLAGS="-g" ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 + fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 ++$as_echo "$ac_ct_STRIP" >&6; } + else +- if test "x$ac_cv_f77_compiler_gnu" = xyes; then +- FFLAGS="-O2" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" + else +- FFLAGS= ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP + fi ++else ++ STRIP="$ac_cv_prog_STRIP" + fi - .c.o: --@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCC_FALSE@ $(COMPILE) -c $< +-G77=`test $ac_compiler_gnu = yes && echo yes` +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- +- +- +-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! ++test -z "$STRIP" && STRIP=: - .c.obj: --@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` +-# find the maximum length of command line arguments +-echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 +-if test "${lt_cv_sys_max_cmd_len+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- i=0 +- teststring="ABCD" - .c.lo: --@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +- case $build_os in +- msdosdjgpp*) +- # On DJGPP, this test can blow up pretty badly due to problems in libc +- # (any single argument exceeding 2000 bytes causes a buffer overrun +- # during glob expansion). Even if it were fixed, the result of this +- # check would be larger than it should be. +- lt_cv_sys_max_cmd_len=12288; # 12K is about right +- ;; - libraidutil_la-engmsg.lo: engmsg.c --@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-engmsg.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-engmsg.Tpo" -c -o libraidutil_la-engmsg.lo `test -f 'engmsg.c' || echo '$(srcdir)/'`engmsg.c; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-engmsg.Tpo" "$(DEPDIR)/libraidutil_la-engmsg.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-engmsg.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-engmsg.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-engmsg.Tpo -c -o libraidutil_la-engmsg.lo `test -f 'engmsg.c' || echo '$(srcdir)/'`engmsg.c -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-engmsg.Tpo $(DEPDIR)/libraidutil_la-engmsg.Plo - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='engmsg.c' object='libraidutil_la-engmsg.lo' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-engmsg.lo `test -f 'engmsg.c' || echo '$(srcdir)/'`engmsg.c -+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-engmsg.lo `test -f 'engmsg.c' || echo '$(srcdir)/'`engmsg.c +- gnu*) +- # Under GNU Hurd, this test is not required because there is +- # no limit to the length of command line arguments. +- # Libtool will interpret -1 as no limit whatsoever +- lt_cv_sys_max_cmd_len=-1; +- ;; + +- cygwin* | mingw*) +- # On Win9x/ME, this test blows up -- it succeeds, but takes +- # about 5 minutes as the teststring grows exponentially. +- # Worse, since 9x/ME are not pre-emptively multitasking, +- # you end up with a "frozen" computer, even though with patience +- # the test eventually succeeds (with a max line length of 256k). +- # Instead, let's just punt: use the minimum linelength reported by +- # all of the supported platforms: 8192 (on NT/2K/XP). +- lt_cv_sys_max_cmd_len=8192; +- ;; + +- amigaos*) +- # On AmigaOS with pdksh, this test takes hours, literally. +- # So we just punt and use a minimum line length of 8192. +- lt_cv_sys_max_cmd_len=8192; +- ;; + +- *) +- # If test is not a shell built-in, we'll probably end up computing a +- # maximum length that is only half of the actual maximum length, but +- # we can't tell. +- while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ +- = "XX$teststring") >/dev/null 2>&1 && +- new_result=`expr "X$teststring" : ".*" 2>&1` && +- lt_cv_sys_max_cmd_len=$new_result && +- test $i != 17 # 1/2 MB should be enough +- do +- i=`expr $i + 1` +- teststring=$teststring$teststring +- done +- teststring= +- # Add a significant safety factor because C++ compilers can tack on massive +- # amounts of additional arguments before passing them to the linker. +- # It appears as though 1/2 is a usable value. +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` +- ;; +- esac ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_RANLIB+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS + + fi +- +-if test -n $lt_cv_sys_max_cmd_len ; then +- echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 ++fi ++RANLIB=$ac_cv_prog_RANLIB ++if test -n "$RANLIB"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 ++$as_echo "$RANLIB" >&6; } + else +- echo "$as_me:$LINENO: result: none" >&5 +-echo "${ECHO_T}none" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + + +- +- +-# Check for command to grab the raw symbol name followed by C symbol from nm. +-echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 +-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++if test -z "$ac_cv_prog_RANLIB"; then ++ ac_ct_RANLIB=$RANLIB ++ # Extract the first word of "ranlib", so it can be a program name with args. ++set dummy ranlib; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else ++ if test -n "$ac_ct_RANLIB"; then ++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_RANLIB="ranlib" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB ++if test -n "$ac_ct_RANLIB"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 ++$as_echo "$ac_ct_RANLIB" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ RANLIB=$ac_ct_RANLIB ++ fi ++else ++ RANLIB="$ac_cv_prog_RANLIB" ++fi ++ ++test -z "$RANLIB" && RANLIB=: ++ ++ ++ ++ ++ ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= ++ ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 ++$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } ++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +-# These are sane defaults that work on at least a few old systems. +-# [They come from Ultrix. What could be older than Ultrix?!! ;)] +- + # Character class describing NM global symbol codes. + symcode='[BCDEGRST]' - libraidutil_la-findpath.lo: findpath.c --@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-findpath.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-findpath.Tpo" -c -o libraidutil_la-findpath.lo `test -f 'findpath.c' || echo '$(srcdir)/'`findpath.c; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-findpath.Tpo" "$(DEPDIR)/libraidutil_la-findpath.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-findpath.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-findpath.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-findpath.Tpo -c -o libraidutil_la-findpath.lo `test -f 'findpath.c' || echo '$(srcdir)/'`findpath.c -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-findpath.Tpo $(DEPDIR)/libraidutil_la-findpath.Plo - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='findpath.c' object='libraidutil_la-findpath.lo' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-findpath.lo `test -f 'findpath.c' || echo '$(srcdir)/'`findpath.c -+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-findpath.lo `test -f 'findpath.c' || echo '$(srcdir)/'`findpath.c + # Regexp to match symbols that can be accessed directly from C. + sympat='$[_A-Za-z][_A-Za-z0-9]*$' - libraidutil_la-funcs.lo: funcs.c --@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-funcs.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-funcs.Tpo" -c -o libraidutil_la-funcs.lo `test -f 'funcs.c' || echo '$(srcdir)/'`funcs.c; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-funcs.Tpo" "$(DEPDIR)/libraidutil_la-funcs.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-funcs.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-funcs.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-funcs.Tpo -c -o libraidutil_la-funcs.lo `test -f 'funcs.c' || echo '$(srcdir)/'`funcs.c -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-funcs.Tpo $(DEPDIR)/libraidutil_la-funcs.Plo - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='funcs.c' object='libraidutil_la-funcs.lo' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-funcs.lo `test -f 'funcs.c' || echo '$(srcdir)/'`funcs.c -+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-funcs.lo `test -f 'funcs.c' || echo '$(srcdir)/'`funcs.c +-# Transform the above into a raw symbol and a C symbol. +-symxfrm='\1 \2\3 \3' +- +-# Transform an extracted symbol line into a proper C declaration +-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* $.*$$/extern int \1;/p'" +- +-# Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode $[^ ]*$ $[^ ]*$$/ {\"\2\", (lt_ptr) \&\2},/p'" +- + # Define system-specific variables. + case $host_os in + aix*) + symcode='[BCDT]' + ;; +-cygwin* | mingw* | pw32*) ++cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +-hpux*) # Its linker distinguishes data from code symbols ++hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi +- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" +- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; + irix* | nonstopux*) + symcode='[BCDEGRST]' +@@ -5502,62 +6229,102 @@ irix* | nonstopux*) + osf*) + symcode='[BCDEGQRST]' + ;; +-solaris* | sysv5*) ++solaris*) + symcode='[BDRT]' + ;; ++sco3.2v5*) ++ symcode='[DT]' ++ ;; ++sysv4.2uw2*) ++ symcode='[DT]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[ABDT]' ++ ;; + sysv4) + symcode='[DFNSTU]' + ;; + esac - libraidutil_la-lockunix.lo: lockunix.c --@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-lockunix.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-lockunix.Tpo" -c -o libraidutil_la-lockunix.lo `test -f 'lockunix.c' || echo '$(srcdir)/'`lockunix.c; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-lockunix.Tpo" "$(DEPDIR)/libraidutil_la-lockunix.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-lockunix.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-lockunix.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-lockunix.Tpo -c -o libraidutil_la-lockunix.lo `test -f 'lockunix.c' || echo '$(srcdir)/'`lockunix.c -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-lockunix.Tpo $(DEPDIR)/libraidutil_la-lockunix.Plo - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lockunix.c' object='libraidutil_la-lockunix.lo' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-lockunix.lo `test -f 'lockunix.c' || echo '$(srcdir)/'`lockunix.c -+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-lockunix.lo `test -f 'lockunix.c' || echo '$(srcdir)/'`lockunix.c ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[ABCDGIRSTW]' ;; ++esac ++ ++# Transform an extracted symbol line into a proper C declaration. ++# Some systems (esp. on ia64) link data and code symbols differently, ++# so use this general approach. ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" ++ ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[^ ]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[^ ]*$ $lib[^ ]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[^ ]*$ $[^ ]*$$/ {\"lib\2\", (void *) \&\2},/p'" ++ + # Handle CRLF in mingw tool chain + opt_cr= + case $build_os in + mingw*) +- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; + esac - libraidutil_la-dptalign.lo: dptalign.c --@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-dptalign.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-dptalign.Tpo" -c -o libraidutil_la-dptalign.lo `test -f 'dptalign.c' || echo '$(srcdir)/'`dptalign.c; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-dptalign.Tpo" "$(DEPDIR)/libraidutil_la-dptalign.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-dptalign.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-dptalign.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-dptalign.Tpo -c -o libraidutil_la-dptalign.lo `test -f 'dptalign.c' || echo '$(srcdir)/'`dptalign.c -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-dptalign.Tpo $(DEPDIR)/libraidutil_la-dptalign.Plo - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='dptalign.c' object='libraidutil_la-dptalign.lo' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-dptalign.lo `test -f 'dptalign.c' || echo '$(srcdir)/'`dptalign.c -+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-dptalign.lo `test -f 'dptalign.c' || echo '$(srcdir)/'`dptalign.c +-# If we're using GNU nm, then use its standard symbol codes. +-case `$NM -V 2>&1` in +-*GNU* | *'with BFD'*) +- symcode='[ABCDGIRSTW]' ;; +-esac +- +-# Try without a prefix undercore, then with it. ++# Try without a prefix underscore, then with it. + for ac_symprfx in "" "_"; do - .cpp.o: --@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" ++ + # Write the raw and C identifiers. +- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$symcode*$[ ][ ]*$$ac_symprfx$$sympat$opt_cr$/$symxfrm/p'" ++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ # Fake it for dumpbin and say T for any non-static function ++ # and D for any global variable. ++ # Also find C++ and __fastcall symbols from MSVC++, ++ # which start with @ or ?. ++ lt_cv_sys_global_symbol_pipe="$AWK '"\ ++" {last_section=section; section=\$ 3};"\ ++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ ++" \$ 0!~/External *\|/{next};"\ ++" / 0+ UNDEF /{next}; / UNDEF $[^|]$*()/{next};"\ ++" {if(hide[section]) next};"\ ++" {f=0}; \$ 0~/.*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ ++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ ++" s[1]~/^[@?]/{print s[1], s[1]; next};"\ ++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ ++" ' prfx=^$ac_symprfx" ++ else ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]$$symcode$symcode*$[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" ++ fi - .cpp.obj: --@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + # Check to see that the pipe works correctly. + pipe_works=no - .cpp.lo: --@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< + rm -f conftest* +- cat > conftest.$ac_ext < conftest.$ac_ext <<_LT_EOF + #ifdef __cplusplus + extern "C" { + #endif + char nm_test_var; +-void nm_test_func(){} ++void nm_test_func(void); ++void nm_test_func(void){} + #ifdef __cplusplus + } + #endif + int main(){nm_test_var='a';nm_test_func();return(0);} +-EOF ++_LT_EOF - libraidutil_la-ctlr_map.lo: ctlr_map.cpp --@am__fastdepCXX_TRUE@ if $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-ctlr_map.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-ctlr_map.Tpo" -c -o libraidutil_la-ctlr_map.lo `test -f 'ctlr_map.cpp' || echo '$(srcdir)/'`ctlr_map.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-ctlr_map.Tpo" "$(DEPDIR)/libraidutil_la-ctlr_map.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-ctlr_map.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-ctlr_map.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-ctlr_map.Tpo -c -o libraidutil_la-ctlr_map.lo `test -f 'ctlr_map.cpp' || echo '$(srcdir)/'`ctlr_map.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-ctlr_map.Tpo $(DEPDIR)/libraidutil_la-ctlr_map.Plo - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='ctlr_map.cpp' object='libraidutil_la-ctlr_map.lo' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCXX_FALSE@ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-ctlr_map.lo `test -f 'ctlr_map.cpp' || echo '$(srcdir)/'`ctlr_map.cpp -+@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-ctlr_map.lo `test -f 'ctlr_map.cpp' || echo '$(srcdir)/'`ctlr_map.cpp +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm +- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s "$nlist"; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" +@@ -5566,53 +6333,55 @@ EOF + fi - libraidutil_la-dpt_buff.lo: dpt_buff.cpp --@am__fastdepCXX_TRUE@ if $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-dpt_buff.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-dpt_buff.Tpo" -c -o libraidutil_la-dpt_buff.lo `test -f 'dpt_buff.cpp' || echo '$(srcdir)/'`dpt_buff.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-dpt_buff.Tpo" "$(DEPDIR)/libraidutil_la-dpt_buff.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-dpt_buff.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-dpt_buff.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-dpt_buff.Tpo -c -o libraidutil_la-dpt_buff.lo `test -f 'dpt_buff.cpp' || echo '$(srcdir)/'`dpt_buff.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-dpt_buff.Tpo $(DEPDIR)/libraidutil_la-dpt_buff.Plo - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='dpt_buff.cpp' object='libraidutil_la-dpt_buff.lo' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCXX_FALSE@ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-dpt_buff.lo `test -f 'dpt_buff.cpp' || echo '$(srcdir)/'`dpt_buff.cpp -+@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-dpt_buff.lo `test -f 'dpt_buff.cpp' || echo '$(srcdir)/'`dpt_buff.cpp + # Make sure that we snagged all the symbols we need. +- if grep ' nm_test_var$' "$nlist" >/dev/null; then +- if grep ' nm_test_func$' "$nlist" >/dev/null; then +- cat < conftest.$ac_ext ++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then ++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then ++ cat <<_LT_EOF > conftest.$ac_ext + #ifdef __cplusplus + extern "C" { + #endif - libraidutil_la-engcalls.lo: engcalls.cpp --@am__fastdepCXX_TRUE@ if $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-engcalls.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-engcalls.Tpo" -c -o libraidutil_la-engcalls.lo `test -f 'engcalls.cpp' || echo '$(srcdir)/'`engcalls.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-engcalls.Tpo" "$(DEPDIR)/libraidutil_la-engcalls.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-engcalls.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-engcalls.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-engcalls.Tpo -c -o libraidutil_la-engcalls.lo `test -f 'engcalls.cpp' || echo '$(srcdir)/'`engcalls.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-engcalls.Tpo $(DEPDIR)/libraidutil_la-engcalls.Plo - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='engcalls.cpp' object='libraidutil_la-engcalls.lo' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCXX_FALSE@ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-engcalls.lo `test -f 'engcalls.cpp' || echo '$(srcdir)/'`engcalls.cpp -+@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-engcalls.lo `test -f 'engcalls.cpp' || echo '$(srcdir)/'`engcalls.cpp +-EOF ++_LT_EOF + # Now generate the symbol file. +- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - libraidutil_la-hba_log.lo: hba_log.cpp --@am__fastdepCXX_TRUE@ if $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-hba_log.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-hba_log.Tpo" -c -o libraidutil_la-hba_log.lo `test -f 'hba_log.cpp' || echo '$(srcdir)/'`hba_log.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-hba_log.Tpo" "$(DEPDIR)/libraidutil_la-hba_log.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-hba_log.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-hba_log.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-hba_log.Tpo -c -o libraidutil_la-hba_log.lo `test -f 'hba_log.cpp' || echo '$(srcdir)/'`hba_log.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-hba_log.Tpo $(DEPDIR)/libraidutil_la-hba_log.Plo - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='hba_log.cpp' object='libraidutil_la-hba_log.lo' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCXX_FALSE@ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-hba_log.lo `test -f 'hba_log.cpp' || echo '$(srcdir)/'`hba_log.cpp -+@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-hba_log.lo `test -f 'hba_log.cpp' || echo '$(srcdir)/'`hba_log.cpp +- cat <> conftest.$ac_ext +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr_t void * +-#else +-# define lt_ptr_t char * +-# define const +-#endif ++ cat <<_LT_EOF >> conftest.$ac_ext - libraidutil_la-scsi_log.lo: scsi_log.cpp --@am__fastdepCXX_TRUE@ if $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-scsi_log.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-scsi_log.Tpo" -c -o libraidutil_la-scsi_log.lo `test -f 'scsi_log.cpp' || echo '$(srcdir)/'`scsi_log.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-scsi_log.Tpo" "$(DEPDIR)/libraidutil_la-scsi_log.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-scsi_log.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-scsi_log.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-scsi_log.Tpo -c -o libraidutil_la-scsi_log.lo `test -f 'scsi_log.cpp' || echo '$(srcdir)/'`scsi_log.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-scsi_log.Tpo $(DEPDIR)/libraidutil_la-scsi_log.Plo - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='scsi_log.cpp' object='libraidutil_la-scsi_log.lo' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ --@am__fastdepCXX_FALSE@ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-scsi_log.lo `test -f 'scsi_log.cpp' || echo '$(srcdir)/'`scsi_log.cpp -+@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-scsi_log.lo `test -f 'scsi_log.cpp' || echo '$(srcdir)/'`scsi_log.cpp +-/* The mapping between symbol names and symbols. */ ++/* The mapping between symbol names and symbols. */ + const struct { + const char *name; +- lt_ptr_t address; ++ void *address; + } +-lt_preloaded_symbols[] = ++lt__PROGRAM__LTX_preloaded_symbols[] = + { +-EOF +- $SED "s/^$symcode$symcode* $.*$ $.*$$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext +- cat <<\EOF >> conftest.$ac_ext +- {0, (lt_ptr_t) 0} ++ { "@PROGRAM@", (void *) 0 }, ++_LT_EOF ++ $SED "s/^$symcode$symcode* $.*$ $.*$$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext ++ cat <<\_LT_EOF >> conftest.$ac_ext ++ {0, (void *) 0} + }; - mostlyclean-libtool: - -rm -f *.lo -@@ -385,82 +424,85 @@ mostlyclean-libtool: - clean-libtool: - -rm -rf .libs _libs ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt__PROGRAM__LTX_preloaded_symbols; ++} ++#endif ++ + #ifdef __cplusplus + } + #endif +-EOF ++_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext}; then ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" +@@ -5630,7 +6399,7 @@ EOF + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi +- rm -f conftest* conftst* ++ rm -rf conftest* conftst* --distclean-libtool: -- -rm -f libtool --uninstall-info-am: -- - ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique - tags: TAGS + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then +@@ -5646,4275 +6415,2987 @@ if test -z "$lt_cv_sys_global_symbol_pip + lt_cv_sys_global_symbol_to_cdecl= + fi + if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- echo "$as_me:$LINENO: result: failed" >&5 +-echo "${ECHO_T}failed" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 ++$as_echo "failed" >&6; } + else +- echo "$as_me:$LINENO: result: ok" >&5 +-echo "${ECHO_T}ok" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 ++$as_echo "ok" >&6; } + fi - TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) -- tags=; \ -+ set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ -+ shift; \ -+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ -- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -- $$tags $$unique; \ -+ if test $$# -gt 0; then \ -+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -+ "$$@" $$unique; \ -+ else \ -+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -+ $$unique; \ -+ fi; \ - fi - ctags: CTAGS - CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) -- tags=; \ -- here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -- test -z "$(CTAGS_ARGS)$$tags$$unique" \ -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ -+ test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ -- $$tags $$unique -+ $$unique +-echo "$as_me:$LINENO: checking for objdir" >&5 +-echo $ECHO_N "checking for objdir... $ECHO_C" >&6 +-if test "${lt_cv_objdir+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- rm -f .libs 2>/dev/null +-mkdir .libs 2>/dev/null +-if test -d .libs; then +- lt_cv_objdir=.libs +-else +- # MS-DOS does not allow filenames that begin with a dot. +- lt_cv_objdir=_libs +-fi +-rmdir .libs 2>/dev/null +-fi +-echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +-echo "${ECHO_T}$lt_cv_objdir" >&6 +-objdir=$lt_cv_objdir - GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ -- && cd $(top_srcdir) \ -- && gtags -i $(GTAGS_ARGS) $$here -+ && $(am__cd) $(top_srcdir) \ -+ && gtags -i $(GTAGS_ARGS) "$$here" - distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - distdir: $(DISTFILES) -- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ -- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ -- list='$(DISTFILES)'; for file in $$list; do \ -- case $$file in \ -- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ -- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ -- esac; \ -+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ -+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ -+ list='$(DISTFILES)'; \ -+ dist_files=`for file in $$list; do echo $$file; done | \ -+ sed -e "s|^$$srcdirstrip/||;t" \ -+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ -+ case $$dist_files in \ -+ */*) $(MKDIR_P) `echo "$$dist_files" | \ -+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ -+ sort -u` ;; \ -+ esac; \ -+ for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ -- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ -- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ -- dir="/$$dir"; \ -- $(mkdir_p) "$(distdir)$$dir"; \ -- else \ -- dir=''; \ -- fi; \ - if test -d $$d/$$file; then \ -+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ -+ if test -d "$(distdir)/$$file"; then \ -+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ -+ fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ -- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ -+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ -+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ -- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ -+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ -- test -f $(distdir)/$$file \ -- || cp -p $$d/$$file $(distdir)/$$file \ -+ test -f "$(distdir)/$$file" \ -+ || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -@@ -469,7 +511,7 @@ check: check-am - all-am: Makefile $(LTLIBRARIES) - installdirs: - for dir in "$(DESTDIR)$(libdir)"; do \ -- test -z "$$dir" || $(mkdir_p) "$$dir"; \ -+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done - install: install-am - install-exec: install-exec-am -@@ -491,6 +533,7 @@ clean-generic: - distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - maintainer-clean-generic: - @echo "This command is intended for maintainers to use" -@@ -504,7 +547,7 @@ distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile - distclean-am: clean-am distclean-compile distclean-generic \ -- distclean-libtool distclean-tags -+ distclean-tags +-case $host_os in +-aix3*) +- # AIX sometimes has problems with the GCC collect2 program. For some +- # reason, if we set the COLLECT_NAMES environment variable, the problems +- # vanish in a puff of smoke. +- if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +- fi +- ;; +-esac + +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='sed -e s/^X//' +-sed_quote_subst='s/$[\\"\\`$\\\\]$/\\\1/g' + +-# Same as above, but do not quote variable references. +-double_quote_subst='s/$[\\"\\`\\\\]$/\\\1/g' - dvi: dvi-am +-# Sed substitution to delay expansion of an escaped shell variable in a +-# double_quote_subst'ed string. +-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -@@ -512,18 +555,38 @@ dvi-am: +-# Sed substitution to avoid accidental globbing in evaled expressions +-no_glob_subst='s/\*/\\\*/g' - html: html-am +-# Constants: +-rm="rm -f" -+html-am: -+ - info: info-am +-# Global variables: +-default_ofile=libtool +-can_build_shared=yes - info-am: +-# All known linkers require a `.a' archive for static linking (except M$VC, +-# which needs '.lib'). +-libext=a +-ltmain="$ac_aux_dir/ltmain.sh" +-ofile="$default_ofile" +-with_gnu_ld="$lt_cv_prog_gnu_ld" - install-data-am: +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ar; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_AR+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$AR"; then +- ac_cv_prog_AR="$AR" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_AR="${ac_tool_prefix}ar" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done + +-fi +-fi +-AR=$ac_cv_prog_AR +-if test -n "$AR"; then +- echo "$as_me:$LINENO: result: $AR" >&5 +-echo "${ECHO_T}$AR" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi + +-fi +-if test -z "$ac_cv_prog_AR"; then +- ac_ct_AR=$AR +- # Extract the first word of "ar", so it can be a program name with args. +-set dummy ar; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_AR"; then +- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_AR="ar" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done + +- test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" +-fi +-fi +-ac_ct_AR=$ac_cv_prog_ac_ct_AR +-if test -n "$ac_ct_AR"; then +- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +-echo "${ECHO_T}$ac_ct_AR" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi + +- AR=$ac_ct_AR +-else +- AR="$ac_cv_prog_AR" +-fi + +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_RANLIB+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$RANLIB"; then +- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done + +-fi +-fi +-RANLIB=$ac_cv_prog_RANLIB +-if test -n "$RANLIB"; then +- echo "$as_me:$LINENO: result: $RANLIB" >&5 +-echo "${ECHO_T}$RANLIB" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi -+install-dvi: install-dvi-am + -+install-dvi-am: + - install-exec-am: install-libLTLIBRARIES - -+install-html: install-html-am ++# Check whether --enable-libtool-lock was given. ++if test "${enable_libtool_lock+set}" = set; then : ++ enableval=$enable_libtool_lock; + fi +-if test -z "$ac_cv_prog_RANLIB"; then +- ac_ct_RANLIB=$RANLIB +- # Extract the first word of "ranlib", so it can be a program name with args. +-set dummy ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_RANLIB"; then +- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_RANLIB="ranlib" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 + -+install-html-am: ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + - install-info: install-info-am - -+install-info-am: ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '#line 6478 "configure"' > conftest.$ac_ext ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi ++ fi ++ rm -rf conftest* ++ ;; + - install-man: - -+install-pdf: install-pdf-am ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|s390*-*tpf*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*|s390*-*tpf*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; + -+install-pdf-am: ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 ++$as_echo_n "checking whether the C compiler needs -belf... " >&6; } ++if test "${lt_cv_cc_needs_belf+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + -+install-ps: install-ps-am ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + -+install-ps-am: ++int ++main () ++{ + - installcheck-am: ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ lt_cv_cc_needs_belf=yes ++else ++ lt_cv_cc_needs_belf=no ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 ++$as_echo "$lt_cv_cc_needs_belf" >&6; } ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++esac ++ ++need_locks="$enable_libtool_lock" ++ ++ ++ case $host_os in ++ rhapsody* | darwin*) ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_DSYMUTIL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$DSYMUTIL"; then ++ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 + fi + done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++DSYMUTIL=$ac_cv_prog_DSYMUTIL ++if test -n "$DSYMUTIL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 ++$as_echo "$DSYMUTIL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_DSYMUTIL"; then ++ ac_ct_DSYMUTIL=$DSYMUTIL ++ # Extract the first word of "dsymutil", so it can be a program name with args. ++set dummy dsymutil; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_DSYMUTIL"; then ++ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi + done ++ done ++IFS=$as_save_IFS - maintainer-clean: maintainer-clean-am -@@ -544,20 +607,24 @@ ps: ps-am +- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" + fi + fi +-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +-if test -n "$ac_ct_RANLIB"; then +- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +-echo "${ECHO_T}$ac_ct_RANLIB" >&6 ++ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL ++if test -n "$ac_ct_DSYMUTIL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 ++$as_echo "$ac_ct_DSYMUTIL" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi - ps-am: +- RANLIB=$ac_ct_RANLIB ++ if test "x$ac_ct_DSYMUTIL" = x; then ++ DSYMUTIL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ DSYMUTIL=$ac_ct_DSYMUTIL ++ fi + else +- RANLIB="$ac_cv_prog_RANLIB" ++ DSYMUTIL="$ac_cv_prog_DSYMUTIL" + fi + +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +-set dummy ${ac_tool_prefix}strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_STRIP+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. ++set dummy ${ac_tool_prefix}nmedit; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_NMEDIT+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- if test -n "$STRIP"; then +- ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++ if test -n "$NMEDIT"; then ++ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done ++IFS=$as_save_IFS --uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES -+uninstall-am: uninstall-libLTLIBRARIES -+ -+.MAKE: install-am install-strip + fi + fi +-STRIP=$ac_cv_prog_STRIP +-if test -n "$STRIP"; then +- echo "$as_me:$LINENO: result: $STRIP" >&5 +-echo "${ECHO_T}$STRIP" >&6 ++NMEDIT=$ac_cv_prog_NMEDIT ++if test -n "$NMEDIT"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 ++$as_echo "$NMEDIT" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi - .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libLTLIBRARIES clean-libtool ctags distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am html html-am info info-am \ -- install install-am install-data install-data-am install-exec \ -- install-exec-am install-info install-info-am \ -- install-libLTLIBRARIES install-man install-strip installcheck \ -+ install install-am install-data install-data-am install-dvi \ -+ install-dvi-am install-exec install-exec-am install-html \ -+ install-html-am install-info install-info-am \ -+ install-libLTLIBRARIES install-man install-pdf install-pdf-am \ -+ install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ -- tags uninstall uninstall-am uninstall-info-am \ -- uninstall-libLTLIBRARIES -+ tags uninstall uninstall-am uninstall-libLTLIBRARIES + + fi +-if test -z "$ac_cv_prog_STRIP"; then +- ac_ct_STRIP=$STRIP +- # Extract the first word of "strip", so it can be a program name with args. +-set dummy strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++if test -z "$ac_cv_prog_NMEDIT"; then ++ ac_ct_NMEDIT=$NMEDIT ++ # Extract the first word of "nmedit", so it can be a program name with args. ++set dummy nmedit; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- if test -n "$ac_ct_STRIP"; then +- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++ if test -n "$ac_ct_NMEDIT"; then ++ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_STRIP="strip" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_NMEDIT="nmedit" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +-done ++ done ++IFS=$as_save_IFS - # Tell versions [3.59,3.63) of GNU make to not export all variables. - # Otherwise a system limit (for SysV at least) may be exceeded. ---- raidutils-0.0.6.orig/lib/lockunix.c -+++ raidutils-0.0.6/lib/lockunix.c -@@ -82,7 +82,7 @@ MkLock (char * name) - return (-1); - } - sprintf (templateBuffer, Template, Name); -- if ((fd = open(mktemp (templateBuffer), O_WRONLY|O_CREAT|O_EXCL)) < 0) { -+ if ((fd = open(mktemp (templateBuffer), O_WRONLY|O_CREAT|O_EXCL, 0644)) < 0) { - free (templateBuffer); - free (lock); - return (-1); -@@ -152,7 +152,7 @@ ChLock (char * name, int pid) - - if (lock != (char *)NULL) { - sprintf (lock, Lock, Name); -- if ((fd = open(lock, O_WRONLY|O_CREAT|O_TRUNC)) >= 0) { -+ if ((fd = open(lock, O_WRONLY|O_CREAT|O_TRUNC, 0644)) >= 0) { - sprintf (buffer, "%d\n", pid); - write (fd, buffer, strlen(buffer)); - close (fd); ---- raidutils-0.0.6.orig/lib/ctlr_map.cpp -+++ raidutils-0.0.6/lib/ctlr_map.cpp -@@ -38,9 +38,12 @@ - * Description: Discover device naming in the OS environment. - * Version Control: - * --* $Revision: 37 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:19:51 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" + fi + fi +-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +-if test -n "$ac_ct_STRIP"; then +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-echo "${ECHO_T}$ac_ct_STRIP" >&6 ++ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT ++if test -n "$ac_ct_NMEDIT"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 ++$as_echo "$ac_ct_NMEDIT" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/lib/engcalls.cpp -+++ raidutils-0.0.6/lib/engcalls.cpp -@@ -292,8 +292,8 @@ DPT_RTN_T DPT_CallAnEngine(long Destinat - { - if(AllocBuffers(ToSize,FromSize) == NULL) - { -- printf("\nShared Memory Allocation Failed, To Size = %x, From Size = %x, Errno = %x", -- ToSize, FromSize, errno); -+ printf("\nShared Memory Allocation Failed, To Size = %lx, From Size = %lx, Errno = %x", -+ (unsigned long)ToSize, (unsigned long)FromSize, errno); - #ifdef _DPT_LOGGER - // - // If this is the logger, release the semaphore -@@ -333,7 +333,7 @@ DPT_RTN_T DPT_CallAnEngine(long Destinat - // - // Send off the message to the engine - // -- if(i = msgsnd(MsgID,(struct msgbuf *)&HdrBuff,MsgDataSize,0) != -1) -+ if((i = (msgsnd(MsgID,(struct msgbuf *)&HdrBuff,MsgDataSize,0) != -1))) - { - // - // Set up the alarm if we are timming -@@ -987,7 +987,7 @@ char *AllocBuffers(uLONG toEngSize, uLON +- STRIP=$ac_ct_STRIP ++ if test "x$ac_ct_NMEDIT" = x; then ++ NMEDIT=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ NMEDIT=$ac_ct_NMEDIT ++ fi + else +- STRIP="$ac_cv_prog_STRIP" ++ NMEDIT="$ac_cv_prog_NMEDIT" + fi - /* The Attach Failed, So DeAllocate The Shared Memory */ ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. ++set dummy ${ac_tool_prefix}lipo; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_LIPO+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$LIPO"; then ++ ac_cv_prog_LIPO="$LIPO" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_LIPO="${ac_tool_prefix}lipo" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS -- if((int)SharedMemoryPtr == -1) -+ if((long)SharedMemoryPtr == -1) - { - shmctl(BufferID,IPC_RMID,&shm_buff); - SharedMemoryPtr = NULL; -@@ -1196,7 +1196,7 @@ void I2oPrintMem(char* Addr,long Count) +-old_CC="$CC" +-old_CFLAGS="$CFLAGS" ++fi ++fi ++LIPO=$ac_cv_prog_LIPO ++if test -n "$LIPO"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 ++$as_echo "$LIPO" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi - // Print Out The Address In HEX +-# Set sane defaults for various variables +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-test -z "$AS" && AS=as +-test -z "$CC" && CC=cc +-test -z "$LTCC" && LTCC=$CC +-test -z "$DLLTOOL" && DLLTOOL=dlltool +-test -z "$LD" && LD=ld +-test -z "$LN_S" && LN_S="ln -s" +-test -z "$MAGIC_CMD" && MAGIC_CMD=file +-test -z "$NM" && NM=nm +-test -z "$SED" && SED=sed +-test -z "$OBJDUMP" && OBJDUMP=objdump +-test -z "$RANLIB" && RANLIB=: +-test -z "$STRIP" && STRIP=: +-test -z "$ac_objext" && ac_objext=o -- printf("\n%.4x ",Offset); -+ printf("\n%.4lx ",(unsigned long)Offset); +-# Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +-old_postinstall_cmds='chmod 644 $oldlib' +-old_postuninstall_cmds= ++fi ++if test -z "$ac_cv_prog_LIPO"; then ++ ac_ct_LIPO=$LIPO ++ # Extract the first word of "lipo", so it can be a program name with args. ++set dummy lipo; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_LIPO"; then ++ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_LIPO="lipo" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS - // Now Print Out 16 Bytes In HEX Format +-if test -n "$RANLIB"; then +- case $host_os in +- openbsd*) +- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" +- ;; +- *) +- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" +- ;; +- esac +- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++fi ++ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO ++if test -n "$ac_ct_LIPO"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 ++$as_echo "$ac_ct_LIPO" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi ---- raidutils-0.0.6.orig/lib/engmsg.c -+++ raidutils-0.0.6/lib/engmsg.c -@@ -152,7 +152,7 @@ int MessageDPTEngine(int EngineMsgKey,in - // - // Send off the message to the engine - // -- if(i = msgsnd(msqID,(struct msgbuf *)&HdrBuff,MsgDataSize,0) != -1) -+ if((i = (msgsnd(msqID,(struct msgbuf *)&HdrBuff,MsgDataSize,0) != -1))) - { - // - // Let's set up a little loop here receiving messages in case ---- /dev/null -+++ raidutils-0.0.6/m4/libtool.m4 -@@ -0,0 +1,7377 @@ -+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -+# -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -+# 2006, 2007, 2008 Free Software Foundation, Inc. -+# Written by Gordon Matzigkeit, 1996 -+# -+# This file is free software; the Free Software Foundation gives -+# unlimited permission to copy and/or distribute it, with or without -+# modifications, as long as this notice is preserved. -+ -+m4_define([_LT_COPYING], [dnl -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -+# 2006, 2007, 2008 Free Software Foundation, Inc. -+# Written by Gordon Matzigkeit, 1996 -+# -+# This file is part of GNU Libtool. -+# -+# GNU Libtool is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# As a special exception to the GNU General Public License, -+# if you distribute this file as part of a program or library that -+# is built using GNU Libtool, you may include this file under the -+# same distribution terms that you use for the rest of that program. -+# -+# GNU Libtool is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with GNU Libtool; see the file COPYING. If not, a copy -+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -+# obtained by writing to the Free Software Foundation, Inc., -+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+]) -+ -+# serial 56 LT_INIT -+ -+ -+# LT_PREREQ(VERSION) -+# ------------------ -+# Complain and exit if this libtool version is less that VERSION. -+m4_defun([LT_PREREQ], -+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, -+ [m4_default([$3], -+ [m4_fatal([Libtool version $1 or higher is required], -+ 63)])], -+ [$2])]) -+ -+ -+# _LT_CHECK_BUILDDIR -+# ------------------ -+# Complain if the absolute build directory name contains unusual characters -+m4_defun([_LT_CHECK_BUILDDIR], -+[case `pwd` in -+ *\ * | *\ *) -+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +-# Only perform the check for file, if the check method requires it +-case $deplibs_check_method in +-file_magic*) +- if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 +-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ if test "x$ac_ct_LIPO" = x; then ++ LIPO=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; +esac -+]) -+ -+ -+# LT_INIT([OPTIONS]) -+# ------------------ -+AC_DEFUN([LT_INIT], -+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -+AC_BEFORE([$0], [LT_LANG])dnl -+AC_BEFORE([$0], [LT_OUTPUT])dnl -+AC_BEFORE([$0], [LTDL_INIT])dnl -+m4_require([_LT_CHECK_BUILDDIR])dnl -+ -+dnl Autoconf doesn't catch unexpanded LT_ macros by default: -+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl -+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl -+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 -+dnl unless we require an AC_DEFUNed macro: -+AC_REQUIRE([LTOPTIONS_VERSION])dnl -+AC_REQUIRE([LTSUGAR_VERSION])dnl -+AC_REQUIRE([LTVERSION_VERSION])dnl -+AC_REQUIRE([LTOBSOLETE_VERSION])dnl -+m4_require([_LT_PROG_LTMAIN])dnl -+ -+dnl Parse OPTIONS -+_LT_SET_OPTIONS([$0], [$1]) -+ -+# This can be used to rebuild libtool when needed -+LIBTOOL_DEPS="$ltmain" -+ -+# Always use our own libtool. -+LIBTOOL='$(SHELL) $(top_builddir)/libtool' -+AC_SUBST(LIBTOOL)dnl -+ -+_LT_SETUP -+ -+# Only expand once: -+m4_define([LT_INIT]) -+])# LT_INIT -+ -+# Old names: -+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) -+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_PROG_LIBTOOL], []) -+dnl AC_DEFUN([AM_PROG_LIBTOOL], []) -+ -+ -+# _LT_CC_BASENAME(CC) -+# ------------------- -+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -+m4_defun([_LT_CC_BASENAME], -+[for cc_temp in $1""; do -+ case $cc_temp in -+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; -+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; -+ \-*) ;; -+ *) break;; -+ esac ++ LIPO=$ac_ct_LIPO ++ fi + else +- case $MAGIC_CMD in +-[\\/*] | ?:[\\/]*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +-*) +- lt_save_MAGIC_CMD="$MAGIC_CMD" +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" +- for ac_dir in $ac_dummy; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/${ac_tool_prefix}file; then +- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic $.*$\"`" +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- $EGREP "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 +- +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org ++ LIPO="$ac_cv_prog_LIPO" ++fi + +-EOF +- fi ;; +- esac +- fi +- break +- fi ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_OTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$OTOOL"; then ++ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OTOOL="${ac_tool_prefix}otool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi +done -+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -+]) -+ -+ -+# _LT_FILEUTILS_DEFAULTS -+# ---------------------- -+# It is okay to use these file commands and assume they have been set -+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. -+m4_defun([_LT_FILEUTILS_DEFAULTS], -+[: ${CP="cp -f"} -+: ${MV="mv -f"} -+: ${RM="rm -f"} -+])# _LT_FILEUTILS_DEFAULTS -+ -+ -+# _LT_SETUP -+# --------- -+m4_defun([_LT_SETUP], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+AC_REQUIRE([AC_CANONICAL_BUILD])dnl -+_LT_DECL([], [host_alias], [0], [The host system])dnl -+_LT_DECL([], [host], [0])dnl -+_LT_DECL([], [host_os], [0])dnl -+dnl -+_LT_DECL([], [build_alias], [0], [The build system])dnl -+_LT_DECL([], [build], [0])dnl -+_LT_DECL([], [build_os], [0])dnl -+dnl -+AC_REQUIRE([AC_PROG_CC])dnl -+AC_REQUIRE([LT_PATH_LD])dnl -+AC_REQUIRE([LT_PATH_NM])dnl -+dnl -+AC_REQUIRE([AC_PROG_LN_S])dnl -+test -z "$LN_S" && LN_S="ln -s" -+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl -+dnl -+AC_REQUIRE([LT_CMD_MAX_LEN])dnl -+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl -+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl -+dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_CHECK_SHELL_FEATURES])dnl -+m4_require([_LT_CMD_RELOAD])dnl -+m4_require([_LT_CHECK_MAGIC_METHOD])dnl -+m4_require([_LT_CMD_OLD_ARCHIVE])dnl -+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -+ -+_LT_CONFIG_LIBTOOL_INIT([ -+# See if we are running on zsh, and set the options which allow our -+# commands through without removal of \ escapes INIT. -+if test -n "\${ZSH_VERSION+set}" ; then -+ setopt NO_GLOB_SUBST + done +- IFS="$lt_save_ifs" +- MAGIC_CMD="$lt_save_MAGIC_CMD" +- ;; +-esac +-fi ++IFS=$as_save_IFS + +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6 +fi -+]) -+if test -n "${ZSH_VERSION+set}" ; then -+ setopt NO_GLOB_SUBST +fi ++OTOOL=$ac_cv_prog_OTOOL ++if test -n "$OTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 ++$as_echo "$OTOOL" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + +-if test -z "$lt_cv_path_MAGIC_CMD"; then +- if test -n "$ac_tool_prefix"; then +- echo "$as_me:$LINENO: checking for file" >&5 +-echo $ECHO_N "checking for file... $ECHO_C" >&6 +-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 + -+_LT_CHECK_OBJDIR -+ -+m4_require([_LT_TAG_COMPILER])dnl -+_LT_PROG_ECHO_BACKSLASH -+ -+case $host_os in -+aix3*) -+ # AIX sometimes has problems with the GCC collect2 program. For some -+ # reason, if we set the COLLECT_NAMES environment variable, the problems -+ # vanish in a puff of smoke. -+ if test "X${COLLECT_NAMES+set}" != Xset; then -+ COLLECT_NAMES= -+ export COLLECT_NAMES ++fi ++if test -z "$ac_cv_prog_OTOOL"; then ++ ac_ct_OTOOL=$OTOOL ++ # Extract the first word of "otool", so it can be a program name with args. ++set dummy otool; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- case $MAGIC_CMD in +-[\\/*] | ?:[\\/]*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +-*) +- lt_save_MAGIC_CMD="$MAGIC_CMD" +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" +- for ac_dir in $ac_dummy; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/file; then +- lt_cv_path_MAGIC_CMD="$ac_dir/file" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic $.*$\"`" +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- $EGREP "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 ++ if test -n "$ac_ct_OTOOL"; then ++ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OTOOL="otool" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 + fi -+ ;; -+esac -+ -+# Sed substitution that helps us do robust quoting. It backslashifies -+# metacharacters that are still active within double-quoted strings. -+sed_quote_subst='s/$[["`$\\]]$/\\\1/g' -+ -+# Same as above, but do not quote variable references. -+double_quote_subst='s/$[["`\\]]$/\\\1/g' -+ -+# Sed substitution to delay expansion of an escaped shell variable in a -+# double_quote_subst'ed string. -+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -+ -+# Sed substitution to delay expansion of an escaped single quote. -+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' -+ -+# Sed substitution to avoid accidental globbing in evaled expressions -+no_glob_subst='s/\*/\\\*/g' -+ -+# Global variables: -+ofile=libtool -+can_build_shared=yes -+ -+# All known linkers require a `.a' archive for static linking (except MSVC, -+# which needs '.lib'). -+libext=a -+ -+with_gnu_ld="$lt_cv_prog_gnu_ld" -+ -+old_CC="$CC" -+old_CFLAGS="$CFLAGS" -+ -+# Set sane defaults for various variables -+test -z "$CC" && CC=cc -+test -z "$LTCC" && LTCC=$CC -+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -+test -z "$LD" && LD=ld -+test -z "$ac_objext" && ac_objext=o -+ -+_LT_CC_BASENAME([$compiler]) -+ -+# Only perform the check for file, if the check method requires it -+test -z "$MAGIC_CMD" && MAGIC_CMD=file -+case $deplibs_check_method in -+file_magic*) -+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then -+ _LT_PATH_MAGIC ++done ++ done ++IFS=$as_save_IFS + +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org ++fi ++fi ++ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL ++if test -n "$ac_ct_OTOOL"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 ++$as_echo "$ac_ct_OTOOL" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi + +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$lt_save_ifs" +- MAGIC_CMD="$lt_save_MAGIC_CMD" +- ;; ++ if test "x$ac_ct_OTOOL" = x; then ++ OTOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; + esac ++ OTOOL=$ac_ct_OTOOL + fi -+ ;; -+esac -+ -+# Use C for the default configuration in the libtool script -+LT_SUPPORTED_TAG([CC]) -+_LT_LANG_C_CONFIG -+_LT_LANG_DEFAULT_CONFIG -+_LT_CONFIG_COMMANDS -+])# _LT_SETUP -+ -+ -+# _LT_PROG_LTMAIN -+# --------------- -+# Note that this code is called both from `configure', and `config.status' -+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -+# `config.status' has no value for ac_aux_dir unless we are using Automake, -+# so we pass a copy along to make sure it has a sensible value anyway. -+m4_defun([_LT_PROG_LTMAIN], -+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl -+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -+ltmain="$ac_aux_dir/ltmain.sh" -+])# _LT_PROG_LTMAIN -+ -+ -+## ------------------------------------- ## -+## Accumulate code for creating libtool. ## -+## ------------------------------------- ## -+ -+# So that we can recreate a full libtool script including additional -+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -+# in macros and then make a single call at the end using the `libtool' -+# label. -+ -+ -+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) -+# ---------------------------------------- -+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. -+m4_define([_LT_CONFIG_LIBTOOL_INIT], -+[m4_ifval([$1], -+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT], -+ [$1 -+])])]) -+ -+# Initialize. -+m4_define([_LT_OUTPUT_LIBTOOL_INIT]) -+ -+ -+# _LT_CONFIG_LIBTOOL([COMMANDS]) -+# ------------------------------ -+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. -+m4_define([_LT_CONFIG_LIBTOOL], -+[m4_ifval([$1], -+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], -+ [$1 -+])])]) -+ -+# Initialize. -+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) -+ -+ -+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) -+# ----------------------------------------------------- -+m4_defun([_LT_CONFIG_SAVE_COMMANDS], -+[_LT_CONFIG_LIBTOOL([$1]) -+_LT_CONFIG_LIBTOOL_INIT([$2]) -+]) -+ -+ -+# _LT_FORMAT_COMMENT([COMMENT]) -+# ----------------------------- -+# Add leading comment marks to the start of each line, and a trailing -+# full-stop to the whole comment if one is not present already. -+m4_define([_LT_FORMAT_COMMENT], -+[m4_ifval([$1], [ -+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], -+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) -+)]) -+ -+ -+ -+## ------------------------ ## -+## FIXME: Eliminate VARNAME ## -+## ------------------------ ## -+ -+ -+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) -+# ------------------------------------------------------------------- -+# CONFIGNAME is the name given to the value in the libtool script. -+# VARNAME is the (base) name used in the configure script. -+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on -+# VARNAME. Any other value will be used directly. -+m4_define([_LT_DECL], -+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], -+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], -+ [m4_ifval([$1], [$1], [$2])]) -+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) -+ m4_ifval([$4], -+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) -+ lt_dict_add_subkey([lt_decl_dict], [$2], -+ [tagged?], [m4_ifval([$5], [yes], [no])])]) -+]) -+ -+ -+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) -+# -------------------------------------------------------- -+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) -+ -+ -+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) -+# ------------------------------------------------ -+m4_define([lt_decl_tag_varnames], -+[_lt_decl_filter([tagged?], [yes], $@)]) -+ -+ -+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) -+# --------------------------------------------------------- -+m4_define([_lt_decl_filter], -+[m4_case([$#], -+ [0], [m4_fatal([$0: too few arguments: $#])], -+ [1], [m4_fatal([$0: too few arguments: $#: $1])], -+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], -+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], -+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl -+]) -+ -+ -+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) -+# -------------------------------------------------- -+m4_define([lt_decl_quote_varnames], -+[_lt_decl_filter([value], [1], $@)]) -+ -+ -+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) -+# --------------------------------------------------- -+m4_define([lt_decl_dquote_varnames], -+[_lt_decl_filter([value], [2], $@)]) -+ -+ -+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) -+# --------------------------------------------------- -+m4_define([lt_decl_varnames_tagged], -+[m4_assert([$# <= 2])dnl -+_$0(m4_quote(m4_default([$1], [[, ]])), -+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), -+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) -+m4_define([_lt_decl_varnames_tagged], -+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) -+ -+ -+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) -+# ------------------------------------------------ -+m4_define([lt_decl_all_varnames], -+[_$0(m4_quote(m4_default([$1], [[, ]])), -+ m4_if([$2], [], -+ m4_quote(lt_decl_varnames), -+ m4_quote(m4_shift($@))))[]dnl -+]) -+m4_define([_lt_decl_all_varnames], -+[lt_join($@, lt_decl_varnames_tagged([$1], -+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl -+]) -+ -+ -+# _LT_CONFIG_STATUS_DECLARE([VARNAME]) -+# ------------------------------------ -+# Quote a variable value, and forward it to `config.status' so that its -+# declaration there will have the same value as in `configure'. VARNAME -+# must have a single quote delimited value for this to work. -+m4_define([_LT_CONFIG_STATUS_DECLARE], -+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) -+ -+ -+# _LT_CONFIG_STATUS_DECLARATIONS -+# ------------------------------ -+# We delimit libtool config variables with single quotes, so when -+# we write them to config.status, we have to be sure to quote all -+# embedded single quotes properly. In configure, this macro expands -+# each variable declared with _LT_DECL (and _LT_TAGDECL) into: -+# -+# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' -+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], -+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), -+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) -+ -+ -+# _LT_LIBTOOL_TAGS -+# ---------------- -+# Output comment and list of tags supported by the script -+m4_defun([_LT_LIBTOOL_TAGS], -+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -+available_tags="_LT_TAGS"dnl -+]) -+ -+ -+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) -+# ----------------------------------- -+# Extract the dictionary values for VARNAME (optionally with TAG) and -+# expand to a commented shell variable setting: -+# -+# # Some comment about what VAR is for. -+# visible_name=$lt_internal_name -+m4_define([_LT_LIBTOOL_DECLARE], -+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], -+ [description])))[]dnl -+m4_pushdef([_libtool_name], -+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl -+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), -+ [0], [_libtool_name=[$]$1], -+ [1], [_libtool_name=$lt_[]$1], -+ [2], [_libtool_name=$lt_[]$1], -+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl -+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl -+]) -+ -+ -+# _LT_LIBTOOL_CONFIG_VARS -+# ----------------------- -+# Produce commented declarations of non-tagged libtool config variables -+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' -+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG -+# section) are produced by _LT_LIBTOOL_TAG_VARS. -+m4_defun([_LT_LIBTOOL_CONFIG_VARS], -+[m4_foreach([_lt_var], -+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), -+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) -+ -+ -+# _LT_LIBTOOL_TAG_VARS(TAG) -+# ------------------------- -+m4_define([_LT_LIBTOOL_TAG_VARS], -+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), -+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) -+ -+ -+# _LT_TAGVAR(VARNAME, [TAGNAME]) -+# ------------------------------ -+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) -+ -+ -+# _LT_CONFIG_COMMANDS -+# ------------------- -+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of -+# variables for single and double quote escaping we saved from calls -+# to _LT_DECL, we can put quote escaped variables declarations -+# into `config.status', and then the shell code to quote escape them in -+# for loops in `config.status'. Finally, any additional code accumulated -+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. -+m4_defun([_LT_CONFIG_COMMANDS], -+[AC_PROVIDE_IFELSE([LT_OUTPUT], -+ dnl If the libtool generation code has been placed in $CONFIG_LT, -+ dnl instead of duplicating it all over again into config.status, -+ dnl then we will have config.status run $CONFIG_LT later, so it -+ dnl needs to know what name is stored there: -+ [AC_CONFIG_COMMANDS([libtool], -+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], -+ dnl If the libtool generation code is destined for config.status, -+ dnl expand the accumulated commands and init code now: -+ [AC_CONFIG_COMMANDS([libtool], -+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) -+])#_LT_CONFIG_COMMANDS -+ ++else ++ OTOOL="$ac_cv_prog_OTOOL" + fi + +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6 ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool64; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_OTOOL64+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$OTOOL64"; then ++ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS + -+# Initialize. -+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], -+[ ++fi ++fi ++OTOOL64=$ac_cv_prog_OTOOL64 ++if test -n "$OTOOL64"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 ++$as_echo "$OTOOL64" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + +- else +- MAGIC_CMD=: + -+# The HP-UX ksh and POSIX shell print the target directory to stdout -+# if CDPATH is set. -+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++fi ++if test -z "$ac_cv_prog_OTOOL64"; then ++ ac_ct_OTOOL64=$OTOOL64 ++ # Extract the first word of "otool64", so it can be a program name with args. ++set dummy otool64; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_OTOOL64"; then ++ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OTOOL64="otool64" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 + fi ++done ++ done ++IFS=$as_save_IFS + -+sed_quote_subst='$sed_quote_subst' -+double_quote_subst='$double_quote_subst' -+delay_variable_subst='$delay_variable_subst' -+_LT_CONFIG_STATUS_DECLARATIONS -+LTCC='$LTCC' -+LTCFLAGS='$LTCFLAGS' -+compiler='$compiler_DEFAULT' ++fi ++fi ++ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 ++if test -n "$ac_ct_OTOOL64"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 ++$as_echo "$ac_ct_OTOOL64" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + +- fi +- ;; ++ if test "x$ac_ct_OTOOL64" = x; then ++ OTOOL64=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; + esac ++ OTOOL64=$ac_ct_OTOOL64 ++ fi ++else ++ OTOOL64="$ac_cv_prog_OTOOL64" ++fi + +-enable_dlopen=no +-enable_win32_dll=no + +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +-if test "${enable_libtool_lock+set}" = set; then +- enableval="$enable_libtool_lock" + +-fi; +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + +-# Check whether --with-pic or --without-pic was given. +-if test "${with_pic+set}" = set; then +- withval="$with_pic" +- pic_mode="$withval" +-else +- pic_mode=default +-fi; +-test -z "$pic_mode" && pic_mode=default + +-# Use C for the default configuration in the libtool script +-tagname= +-lt_save_CC="$CC" +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-# Source file extension for C test sources. +-ac_ext=c + +-# Object file extension for compiled C test sources. +-objext=o +-objext=$objext + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;\n" + +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(){return(0);}\n' + + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} + +-# Allow CC to be a program name with arguments. +-compiler=$CC + + +-# +-# Check for any special shared library compilation flags. +-# +-lt_prog_cc_shlib= +-if test "$GCC" = no; then +- case $host_os in +- sco3.2v5*) +- lt_prog_cc_shlib='-belf' +- ;; +- esac +-fi +-if test -n "$lt_prog_cc_shlib"; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5 +-echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;} +- if echo "$old_CC $old_CFLAGS " | grep "[ ]$lt_prog_cc_shlib[ ]" >/dev/null; then : +- else +- { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 +-echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} +- lt_cv_prog_cc_can_build_shared=no +- fi +-fi + + +-# +-# Check to make sure the static flag actually works. +-# +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6 +-if test "${lt_prog_compiler_static_works+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_static_works=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_prog_compiler_static" +- printf "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&5 +- else +- lt_prog_compiler_static_works=yes +- fi +- fi +- $rm conftest* +- LDFLAGS="$save_LDFLAGS" + +-fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 +-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 + +-if test x"$lt_prog_compiler_static_works" = xyes; then +- : +-else +- lt_prog_compiler_static= +-fi + + + + +-lt_prog_compiler_no_builtin_flag= + +-if test "$GCC" = yes; then +- lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + +-echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 +-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 ++$as_echo_n "checking for -single_module linker flag... " >&6; } ++if test "${lt_cv_apple_cc_single_mod+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- lt_cv_prog_compiler_rtti_exceptions=no +- ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="-fno-rtti -fno-exceptions" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:6269: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:6273: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then +- lt_cv_prog_compiler_rtti_exceptions=yes +- fi +- fi +- $rm conftest* +- ++ lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ rm -rf libconftest.dylib* ++ echo "int foo(void){return 1;}" > conftest.c ++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++-dynamiclib -Wl,-single_module conftest.c" >&5 ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err ++ _lt_result=$? ++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then ++ lt_cv_apple_cc_single_mod=yes ++ else ++ cat conftest.err >&5 ++ fi ++ rm -rf libconftest.dylib* ++ rm -f conftest.* ++ fi + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 ++$as_echo "$lt_cv_apple_cc_single_mod" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 ++$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } ++if test "${lt_cv_ld_exported_symbols_list+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then +- lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" ++int ++main () ++{ + -+# Quote evaled strings. -+for var in lt_decl_all_varnames([[ \ -+]], lt_decl_quote_varnames); do -+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in -+ *[[\\\\\\\`\\"\\\$]]*) -+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" -+ ;; -+ *) -+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" -+ ;; -+ esac ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ lt_cv_ld_exported_symbols_list=yes + else +- : ++ lt_cv_ld_exported_symbols_list=no + fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" + + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 ++$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) # darwin 5.x on ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[91]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[012]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ esac ++ ;; ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' ++ else ++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil='~$DSYMUTIL $lib || :' ++ else ++ _lt_dsymutil= ++ fi ++ ;; ++ esac + +-lt_prog_compiler_wl= +-lt_prog_compiler_pic= +-lt_prog_compiler_static= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 ++$as_echo_n "checking for ANSI C header files... " >&6; } ++if test "${ac_cv_header_stdc+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include + +- if test "$GCC" = yes; then +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_static='-static' ++int ++main () ++{ + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static='-Bstatic' +- fi +- ;; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_header_stdc=yes ++else ++ ac_cv_header_stdc=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' +- ;; ++if test $ac_cv_header_stdc = yes; then ++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include + +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "memchr" >/dev/null 2>&1; then : + +- mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic='-DDLL_EXPORT' +- ;; ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* + +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic='-fno-common' +- ;; ++fi + +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- lt_prog_compiler_can_build_shared=no +- enable_shared=no +- ;; ++if test $ac_cv_header_stdc = yes; then ++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include + +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_prog_compiler_pic=-Kconform_pic +- fi +- ;; ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "free" >/dev/null 2>&1; then : + +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case "$host_cpu" in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic='-fPIC' +- ;; +- esac +- ;; ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* + +- *) +- lt_prog_compiler_pic='-fPIC' +- ;; +- esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- lt_prog_compiler_wl='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static='-Bstatic' +- else +- lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; ++fi + +- mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic='-DDLL_EXPORT' +- ;; ++if test $ac_cv_header_stdc = yes; then ++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. ++ if test "$cross_compiling" = yes; then : ++ : ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++#include ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) ++#endif + +- hpux9* | hpux10* | hpux11*) +- lt_prog_compiler_wl='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case "$host_cpu" in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- lt_prog_compiler_static='${wl}-a ${wl}archive' +- ;; ++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) ++int ++main () ++{ ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ return 2; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_run "$LINENO"; then : + +- irix5* | irix6* | nonstopux*) +- lt_prog_compiler_wl='-Wl,' +- # PIC (with -KPIC) is the default. +- lt_prog_compiler_static='-non_shared' +- ;; ++else ++ ac_cv_header_stdc=no ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext ++fi + +- newsos6) +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- ;; ++fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 ++$as_echo "$ac_cv_header_stdc" >&6; } ++if test $ac_cv_header_stdc = yes; then + +- linux*) +- case $CC in +- icc* | ecc*) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-static' +- ;; +- ccc*) +- lt_prog_compiler_wl='-Wl,' +- # All Alpha code is PIC. +- lt_prog_compiler_static='-non_shared' +- ;; +- esac +- ;; ++$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +- osf3* | osf4* | osf5*) +- lt_prog_compiler_wl='-Wl,' +- # All OSF/1 code is PIC. +- lt_prog_compiler_static='-non_shared' +- ;; ++fi + +- sco3.2v5*) +- lt_prog_compiler_pic='-Kpic' +- lt_prog_compiler_static='-dn' +- ;; ++# On IRIX 5.3, sys/types and inttypes.h are conflicting. ++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ ++ inttypes.h stdint.h unistd.h ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default ++" ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF + +- solaris*) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- ;; ++fi + +- sunos4*) +- lt_prog_compiler_wl='-Qoption ld ' +- lt_prog_compiler_pic='-PIC' +- lt_prog_compiler_static='-Bstatic' +- ;; +done -+ -+# Double-quote double-evaled strings. -+for var in lt_decl_all_varnames([[ \ -+]], lt_decl_dquote_varnames); do -+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in -+ *[[\\\\\\\`\\"\\\$]]*) -+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" -+ ;; -+ *) -+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" -+ ;; -+ esac + +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- ;; + +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_prog_compiler_pic='-Kconform_pic' +- lt_prog_compiler_static='-Bstatic' +- fi +- ;; ++for ac_header in dlfcn.h ++do : ++ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default ++" ++if test "x$ac_cv_header_dlfcn_h" = x""yes; then : ++ cat >>confdefs.h <<_ACEOF ++#define HAVE_DLFCN_H 1 ++_ACEOF + +- uts4*) +- lt_prog_compiler_pic='-pic' +- lt_prog_compiler_static='-Bstatic' +- ;; ++fi + +- *) +- lt_prog_compiler_can_build_shared=no +- ;; +- esac +- fi +done -+ -+# Fix-up fallback echo if it was mangled by the above quoting rules. -+case \$lt_ECHO in -+*'\\\[$]0 --fallback-echo"')dnl " -+ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` -+ ;; -+esac -+ -+_LT_OUTPUT_LIBTOOL_INIT -+]) -+ -+ -+# LT_OUTPUT -+# --------- -+# This macro allows early generation of the libtool script (before -+# AC_OUTPUT is called), incase it is used in configure for compilation -+# tests. -+AC_DEFUN([LT_OUTPUT], -+[: ${CONFIG_LT=./config.lt} -+AC_MSG_NOTICE([creating $CONFIG_LT]) -+cat >"$CONFIG_LT" <<_LTEOF -+#! $SHELL -+# Generated by $as_me. -+# Run this file to recreate a libtool stub with the current configuration. -+ -+lt_cl_silent=false -+SHELL=\${CONFIG_SHELL-$SHELL} -+_LTEOF -+ -+cat >>"$CONFIG_LT" <<\_LTEOF -+AS_SHELL_SANITIZE -+_AS_PREPARE -+ -+exec AS_MESSAGE_FD>&1 -+exec AS_MESSAGE_LOG_FD>>config.log -+{ -+ echo -+ AS_BOX([Running $as_me.]) -+} >&AS_MESSAGE_LOG_FD -+ -+lt_cl_help="\ -+\`$as_me' creates a local libtool stub from the current configuration, -+for use in further configure time tests before the real libtool is -+generated. -+ -+Usage: $[0] [[OPTIONS]] -+ -+ -h, --help print this help, then exit -+ -V, --version print version number, then exit -+ -q, --quiet do not print progress messages -+ -d, --debug don't remove temporary files -+ -+Report bugs to ." -+ -+lt_cl_version="\ -+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl -+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) -+configured by $[0], generated by m4_PACKAGE_STRING. -+ -+Copyright (C) 2008 Free Software Foundation, Inc. -+This config.lt script is free software; the Free Software Foundation -+gives unlimited permision to copy, distribute and modify it." -+ -+while test $[#] != 0 + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic" >&6 + +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 +-if test "${lt_prog_compiler_pic_works+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ac_ext=cpp ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++if test -z "$CXX"; then ++ if test -n "$CCC"; then ++ CXX=$CCC ++ else ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_CXX+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- lt_prog_compiler_pic_works=no +- ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic -DPIC" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:6502: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:6506: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then +- lt_prog_compiler_pic_works=yes +- fi +- fi +- $rm conftest* +- +-fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6 +- +-if test x"$lt_prog_compiler_pic_works" = xyes; then +- case $lt_prog_compiler_pic in +- "" | " "*) ;; +- *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; +- esac ++ if test -n "$CXX"; then ++ ac_cv_prog_CXX="$CXX" # Let the user override the test. + else +- lt_prog_compiler_pic= +- lt_prog_compiler_can_build_shared=no +-fi ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH +do -+ case $[1] in -+ --version | --v* | -V ) -+ echo "$lt_cl_version"; exit 0 ;; -+ --help | --h* | -h ) -+ echo "$lt_cl_help"; exit 0 ;; -+ --debug | --d* | -d ) -+ debug=: ;; -+ --quiet | --q* | --silent | --s* | -q ) -+ lt_cl_silent=: ;; -+ -+ -*) AC_MSG_ERROR([unrecognized option: $[1] -+Try \`$[0] --help' for more information.]) ;; ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS + + fi +-case "$host_os" in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- lt_prog_compiler_pic= +- ;; +- *) +- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" +- ;; +-esac +- +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +-if test "${lt_cv_prog_compiler_c_o+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++CXX=$ac_cv_prog_CXX ++if test -n "$CXX"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 ++$as_echo "$CXX" >&6; } + else +- lt_cv_prog_compiler_c_o=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:6562: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:6566: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s out/conftest.err; then +- lt_cv_prog_compiler_c_o=yes +- fi +- fi +- chmod u+w . +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* +- ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 + + +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 +- if test "$hard_links" = no; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn ++ test -n "$CXX" && break ++ done ++fi ++if test -z "$CXX"; then ++ ac_ct_CXX=$CXX ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_CXX"; then ++ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CXX="$ac_prog" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 + fi ++done ++ done ++IFS=$as_save_IFS + -+ *) AC_MSG_ERROR([unrecognized argument: $[1] -+Try \`$[0] --help' for more information.]) ;; -+ esac -+ shift ++fi ++fi ++ac_ct_CXX=$ac_cv_prog_ac_ct_CXX ++if test -n "$ac_ct_CXX"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 ++$as_echo "$ac_ct_CXX" >&6; } + else +- need_locks=no ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 +- +- runpath_var= +- allow_undefined_flag= +- enable_shared_with_static_runtimes=no +- archive_cmds= +- archive_expsym_cmds= +- old_archive_From_new_cmds= +- old_archive_from_expsyms_cmds= +- export_dynamic_flag_spec= +- whole_archive_flag_spec= +- thread_safe_flag_spec= +- hardcode_libdir_flag_spec= +- hardcode_libdir_flag_spec_ld= +- hardcode_libdir_separator= +- hardcode_direct=no +- hardcode_minus_L=no +- hardcode_shlibpath_var=unsupported +- link_all_deplibs=unknown +- hardcode_automatic=no +- module_cmds= +- module_expsym_cmds= +- always_export_symbols=no +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- include_expsyms= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- exclude_expsyms="_GLOBAL_OFFSET_TABLE_" +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- extract_expsyms_cmds= + +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac ++ test -n "$ac_ct_CXX" && break ++done + +- ld_shlibs=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' ++ if test "x$ac_ct_CXX" = x; then ++ CXX="g++" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ CXX=$ac_ct_CXX ++ fi ++fi + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix3* | aix4* | aix5*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- ld_shlibs=no +- cat <&2 ++ fi ++fi ++# Provide some information about the compiler. ++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 ++set X $ac_compile ++ac_compiler=$2 ++for ac_option in --version -v -V -qversion; do ++ { { ac_try="$ac_compiler $ac_option >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err ++ ac_status=$? ++ if test -s conftest.err; then ++ sed '10a\ ++... rest of stderr output deleted ... ++ 10q' conftest.err >conftest.er1 ++ cat conftest.er1 >&5 ++ fi ++ rm -f conftest.er1 conftest.err ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } +done + -+if $lt_cl_silent; then -+ exec AS_MESSAGE_FD>/dev/null ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 ++$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } ++if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. ++int ++main () ++{ ++#ifndef __GNUC__ ++ choke me ++#endif + +-EOF +- fi +- ;; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_cxx_try_compile "$LINENO"; then : ++ ac_compiler_gnu=yes ++else ++ ac_compiler_gnu=no +fi -+_LTEOF -+ -+cat >>"$CONFIG_LT" <<_LTEOF -+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT -+_LTEOF -+ -+cat >>"$CONFIG_LT" <<\_LTEOF -+AC_MSG_NOTICE([creating $ofile]) -+_LT_OUTPUT_LIBTOOL_COMMANDS -+AS_EXIT(0) -+_LTEOF -+chmod +x "$CONFIG_LT" -+ -+# configure is writing to config.log, but config.lt does its own redirection, -+# appending to config.log, which fails on DOS, as config.log is still kept -+# open by configure. Here we exec the FD to /dev/null, effectively closing -+# config.log, so it can be properly (re)opened and appended to by config.lt. -+if test "$no_create" != yes; then -+ lt_cl_success=: -+ test "$silent" = yes && -+ lt_config_lt_args="$lt_config_lt_args --quiet" -+ exec AS_MESSAGE_LOG_FD>/dev/null -+ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -+ exec AS_MESSAGE_LOG_FD>>config.log -+ $lt_cl_success || AS_EXIT(1) ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +fi -+])# LT_OUTPUT -+ -+ -+# _LT_CONFIG(TAG) -+# --------------- -+# If TAG is the built-in tag, create an initial libtool script with a -+# default configuration from the untagged config vars. Otherwise add code -+# to config.status for appending the configuration named by TAG from the -+# matching tagged config vars. -+m4_defun([_LT_CONFIG], -+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+_LT_CONFIG_SAVE_COMMANDS([ -+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl -+ m4_if(_LT_TAG, [C], [ -+ # See if we are running on zsh, and set the options which allow our -+ # commands through without removal of \ escapes. -+ if test -n "${ZSH_VERSION+set}" ; then -+ setopt NO_GLOB_SUBST -+ fi -+ -+ cfgfile="${ofile}T" -+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 -+ $RM "$cfgfile" -+ -+ cat <<_LT_EOF >> "$cfgfile" -+#! $SHELL -+ -+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -+# NOTE: Changes made to this file will be lost: look at ltmain.sh. -+# -+_LT_COPYING -+_LT_LIBTOOL_TAGS -+ -+# ### BEGIN LIBTOOL CONFIG -+_LT_LIBTOOL_CONFIG_VARS -+_LT_LIBTOOL_TAG_VARS -+# ### END LIBTOOL CONFIG -+ -+_LT_EOF -+ -+ case $host_os in -+ aix3*) -+ cat <<\_LT_EOF >> "$cfgfile" -+# AIX sometimes has problems with the GCC collect2 program. For some -+# reason, if we set the COLLECT_NAMES environment variable, the problems -+# vanish in a puff of smoke. -+if test "X${COLLECT_NAMES+set}" != Xset; then -+ COLLECT_NAMES= -+ export COLLECT_NAMES ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 ++$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } ++if test $ac_compiler_gnu = yes; then ++ GXX=yes ++else ++ GXX= +fi -+_LT_EOF -+ ;; -+ esac -+ -+ _LT_PROG_LTMAIN -+ -+ # We use sed instead of cat because bash on DJGPP gets confused if -+ # if finds mixed CR/LF and LF-only lines. Since sed operates in -+ # text mode, it properly converts lines to CR/LF. This bash problem -+ # is reportedly fixed, but why not run on old versions too? -+ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ -+ || (rm -f "$cfgfile"; exit 1) -+ -+ _LT_PROG_XSI_SHELLFNS -+ -+ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ -+ || (rm -f "$cfgfile"; exit 1) -+ -+ mv -f "$cfgfile" "$ofile" || -+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") -+ chmod +x "$ofile" -+], -+[cat <<_LT_EOF >> "$ofile" -+ -+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded -+dnl in a comment (ie after a #). -+# ### BEGIN LIBTOOL TAG CONFIG: $1 -+_LT_LIBTOOL_TAG_VARS(_LT_TAG) -+# ### END LIBTOOL TAG CONFIG: $1 -+_LT_EOF -+])dnl /m4_if -+], -+[m4_if([$1], [], [ -+ PACKAGE='$PACKAGE' -+ VERSION='$VERSION' -+ TIMESTAMP='$TIMESTAMP' -+ RM='$RM' -+ ofile='$ofile'], []) -+])dnl /_LT_CONFIG_SAVE_COMMANDS -+])# _LT_CONFIG -+ -+ -+# LT_SUPPORTED_TAG(TAG) -+# --------------------- -+# Trace this macro to discover what tags are supported by the libtool -+# --tag option, using: -+# autoconf --trace 'LT_SUPPORTED_TAG:$1' -+AC_DEFUN([LT_SUPPORTED_TAG], []) -+ -+ -+# C support is built-in for now -+m4_define([_LT_LANG_C_enabled], []) -+m4_define([_LT_TAGS], []) -+ -+ -+# LT_LANG(LANG) -+# ------------- -+# Enable libtool support for the given language if not already enabled. -+AC_DEFUN([LT_LANG], -+[AC_BEFORE([$0], [LT_OUTPUT])dnl -+m4_case([$1], -+ [C], [_LT_LANG(C)], -+ [C++], [_LT_LANG(CXX)], -+ [Java], [_LT_LANG(GCJ)], -+ [Fortran 77], [_LT_LANG(F77)], -+ [Fortran], [_LT_LANG(FC)], -+ [Windows Resource], [_LT_LANG(RC)], -+ [m4_ifdef([_LT_LANG_]$1[_CONFIG], -+ [_LT_LANG($1)], -+ [m4_fatal([$0: unsupported language: "$1"])])])dnl -+])# LT_LANG -+ -+ -+# _LT_LANG(LANGNAME) -+# ------------------ -+m4_defun([_LT_LANG], -+[m4_ifdef([_LT_LANG_]$1[_enabled], [], -+ [LT_SUPPORTED_TAG([$1])dnl -+ m4_append([_LT_TAGS], [$1 ])dnl -+ m4_define([_LT_LANG_]$1[_enabled], [])dnl -+ _LT_LANG_$1_CONFIG($1)])dnl -+])# _LT_LANG -+ -+ -+# _LT_LANG_DEFAULT_CONFIG -+# ----------------------- -+m4_defun([_LT_LANG_DEFAULT_CONFIG], -+[AC_PROVIDE_IFELSE([AC_PROG_CXX], -+ [LT_LANG(CXX)], -+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) -+ -+AC_PROVIDE_IFELSE([AC_PROG_F77], -+ [LT_LANG(F77)], -+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) -+ -+AC_PROVIDE_IFELSE([AC_PROG_FC], -+ [LT_LANG(FC)], -+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) -+ -+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal -+dnl pulling things in needlessly. -+AC_PROVIDE_IFELSE([AC_PROG_GCJ], -+ [LT_LANG(GCJ)], -+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], -+ [LT_LANG(GCJ)], -+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ], -+ [LT_LANG(GCJ)], -+ [m4_ifdef([AC_PROG_GCJ], -+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) -+ m4_ifdef([A][M_PROG_GCJ], -+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) -+ m4_ifdef([LT_PROG_GCJ], -+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) -+ -+AC_PROVIDE_IFELSE([LT_PROG_RC], -+ [LT_LANG(RC)], -+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) -+])# _LT_LANG_DEFAULT_CONFIG -+ -+# Obsolete macros: -+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) -+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) -+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) -+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_CXX], []) -+dnl AC_DEFUN([AC_LIBTOOL_F77], []) -+dnl AC_DEFUN([AC_LIBTOOL_FC], []) -+dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) -+ -+ -+# _LT_TAG_COMPILER -+# ---------------- -+m4_defun([_LT_TAG_COMPILER], -+[AC_REQUIRE([AC_PROG_CC])dnl -+ -+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl -+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl -+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl -+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl -+ -+# If no C compiler was specified, use CC. -+LTCC=${LTCC-"$CC"} -+ -+# If no C compiler flags were specified, use CFLAGS. -+LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -+ -+# Allow CC to be a program name with arguments. -+compiler=$CC -+])# _LT_TAG_COMPILER -+ -+ -+# _LT_COMPILER_BOILERPLATE -+# ------------------------ -+# Check for compiler boilerplate output or warnings with -+# the simple compiler test code. -+m4_defun([_LT_COMPILER_BOILERPLATE], -+[m4_require([_LT_DECL_SED])dnl -+ac_outfile=conftest.$ac_objext -+echo "$lt_simple_compile_test_code" >conftest.$ac_ext -+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -+_lt_compiler_boilerplate=`cat conftest.err` -+$RM conftest* -+])# _LT_COMPILER_BOILERPLATE -+ -+ -+# _LT_LINKER_BOILERPLATE -+# ---------------------- -+# Check for linker boilerplate output or warnings with -+# the simple link test code. -+m4_defun([_LT_LINKER_BOILERPLATE], -+[m4_require([_LT_DECL_SED])dnl -+ac_outfile=conftest.$ac_objext -+echo "$lt_simple_link_test_code" >conftest.$ac_ext -+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -+_lt_linker_boilerplate=`cat conftest.err` -+$RM -r conftest* -+])# _LT_LINKER_BOILERPLATE -+ -+# _LT_REQUIRED_DARWIN_CHECKS -+# ------------------------- -+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ -+ case $host_os in -+ rhapsody* | darwin*) -+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) -+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) -+ AC_CHECK_TOOL([LIPO], [lipo], [:]) -+ AC_CHECK_TOOL([OTOOL], [otool], [:]) -+ AC_CHECK_TOOL([OTOOL64], [otool64], [:]) -+ _LT_DECL([], [DSYMUTIL], [1], -+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) -+ _LT_DECL([], [NMEDIT], [1], -+ [Tool to change global to local symbols on Mac OS X]) -+ _LT_DECL([], [LIPO], [1], -+ [Tool to manipulate fat objects and archives on Mac OS X]) -+ _LT_DECL([], [OTOOL], [1], -+ [ldd/readelf like tool for Mach-O binaries on Mac OS X]) -+ _LT_DECL([], [OTOOL64], [1], -+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) -+ -+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], -+ [lt_cv_apple_cc_single_mod=no -+ if test -z "${LT_MULTI_MODULE}"; then -+ # By default we will add the -single_module flag. You can override -+ # by either setting the environment variable LT_MULTI_MODULE -+ # non-empty at configure time, or by adding -multi_module to the -+ # link flags. -+ rm -rf libconftest.dylib* -+ echo "int foo(void){return 1;}" > conftest.c -+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD -+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err -+ _lt_result=$? -+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then -+ lt_cv_apple_cc_single_mod=yes -+ else -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ fi -+ rm -rf libconftest.dylib* -+ rm -f conftest.* -+ fi]) -+ AC_CACHE_CHECK([for -exported_symbols_list linker flag], -+ [lt_cv_ld_exported_symbols_list], -+ [lt_cv_ld_exported_symbols_list=no -+ save_LDFLAGS=$LDFLAGS -+ echo "_main" > conftest.sym -+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" -+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], -+ [lt_cv_ld_exported_symbols_list=yes], -+ [lt_cv_ld_exported_symbols_list=no]) -+ LDFLAGS="$save_LDFLAGS" -+ ]) -+ case $host_os in -+ rhapsody* | darwin1.[[012]]) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; -+ darwin1.*) -+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; -+ darwin*) # darwin 5.x on -+ # if running on 10.5 or later, the deployment target defaults -+ # to the OS version, if on x86, and 10.4, the deployment -+ # target defaults to 10.4. Don't you love it? -+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in -+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; -+ 10.[[012]]*) -+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; -+ 10.*) -+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; -+ esac -+ ;; -+ esac -+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then -+ _lt_dar_single_mod='$single_module' -+ fi -+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then -+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' -+ else -+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' -+ fi -+ if test "$DSYMUTIL" != ":"; then -+ _lt_dsymutil='~$DSYMUTIL $lib || :' -+ else -+ _lt_dsymutil= -+ fi -+ ;; -+ esac -+]) -+ -+ -+# _LT_DARWIN_LINKER_FEATURES -+# -------------------------- -+# Checks for linker and compiler features on darwin -+m4_defun([_LT_DARWIN_LINKER_FEATURES], -+[ -+ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_automatic, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" -+ case $cc_basename in -+ ifort*) _lt_dar_can_shared=yes ;; -+ *) _lt_dar_can_shared=$GCC ;; -+ esac -+ if test "$_lt_dar_can_shared" = "yes"; then -+ output_verbose_link_cmd=echo -+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" -+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" -+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" -+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" -+ m4_if([$1], [CXX], -+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then -+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" -+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" -+ fi -+],[]) ++ac_test_CXXFLAGS=${CXXFLAGS+set} ++ac_save_CXXFLAGS=$CXXFLAGS ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 ++$as_echo_n "checking whether $CXX accepts -g... " >&6; } ++if test "${ac_cv_prog_cxx_g+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_save_cxx_werror_flag=$ac_cxx_werror_flag ++ ac_cxx_werror_flag=yes ++ ac_cv_prog_cxx_g=no ++ CXXFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- ld_shlibs=no +- ;; ++int ++main () ++{ + +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs=no +- fi +- ;; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_cxx_try_compile "$LINENO"; then : ++ ac_cv_prog_cxx_g=yes ++else ++ CXXFLAGS="" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec='-L$libdir' +- allow_undefined_flag=unsupported +- always_export_symbols=no +- enable_shared_with_static_runtimes=yes +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* $[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++int ++main () ++{ + +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- else +- ld_shlibs=no +- fi +- ;; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_cxx_try_compile "$LINENO"; then : + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; ++else ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++ CXXFLAGS="-g" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +- solaris* | sysv5*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- ld_shlibs=no +- cat <&2 ++int ++main () ++{ + +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_cxx_try_compile "$LINENO"; then : ++ ac_cv_prog_cxx_g=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 ++$as_echo "$ac_cv_prog_cxx_g" >&6; } ++if test "$ac_test_CXXFLAGS" = set; then ++ CXXFLAGS=$ac_save_CXXFLAGS ++elif test $ac_cv_prog_cxx_g = yes; then ++ if test "$GXX" = yes; then ++ CXXFLAGS="-g -O2" + else -+ _LT_TAGVAR(ld_shlibs, $1)=no ++ CXXFLAGS="-g" + fi -+]) -+ -+# _LT_SYS_MODULE_PATH_AIX -+# ----------------------- -+# Links a minimal program and checks the executable -+# for the system default hardcoded library path. In most cases, -+# this is /usr/lib:/lib, but when the MPI compilers are used -+# the location of the communication and MPI libs are included too. -+# If we don't find anything, use the default library path according -+# to the aix ld manual. -+m4_defun([_LT_SYS_MODULE_PATH_AIX], -+[m4_require([_LT_DECL_SED])dnl -+AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -+lt_aix_libpath_sed=' -+ /Import File Strings/,/^$/ { -+ /^0/ { -+ s/^0 *$.*$$/\1/ -+ p -+ } -+ }' -+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+# Check for a 64-bit object if we didn't find anything. -+if test -z "$aix_libpath"; then -+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -+fi],[]) -+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -+])# _LT_SYS_MODULE_PATH_AIX -+ -+ -+# _LT_SHELL_INIT(ARG) -+# ------------------- -+m4_define([_LT_SHELL_INIT], -+[ifdef([AC_DIVERSION_NOTICE], -+ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], -+ [AC_DIVERT_PUSH(NOTICE)]) -+$1 -+AC_DIVERT_POP -+])# _LT_SHELL_INIT -+ -+ -+# _LT_PROG_ECHO_BACKSLASH -+# ----------------------- -+# Add some code to the start of the generated configure script which -+# will find an echo command which doesn't interpret backslashes. -+m4_defun([_LT_PROG_ECHO_BACKSLASH], -+[_LT_SHELL_INIT([ -+# Check that we are running under the correct shell. -+SHELL=${CONFIG_SHELL-/bin/sh} ++else ++ if test "$GXX" = yes; then ++ CXXFLAGS="-O2" ++ else ++ CXXFLAGS= ++ fi ++fi ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; ++depcc="$CXX" am_compiler_list= + +- sunos4*) +- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 ++$as_echo_n "checking dependency style of $depcc... " >&6; } ++if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub + +- linux*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_cmds="$tmp_archive_cmds" +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ +-cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ +-$echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- else +- archive_expsym_cmds="$tmp_archive_cmds" +- fi +- else +- ld_shlibs=no +- fi +- ;; ++ am_cv_CXX_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n 's/^#*$[a-zA-Z0-9]*$)$/\1/p' < ./depcomp` ++ fi ++ am__universal=false ++ case " $depcc " in #( ++ *\ -arch\ *\ -arch\ *) am__universal=true ;; ++ esac + +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + -+case X$lt_ECHO in -+X*--fallback-echo) -+ # Remove one level of quotation (which was required for Make). -+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` -+ ;; -+esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. Also, some Intel ++ # versions had trouble with output in subdirs ++ am__obj=sub/conftest.${OBJEXT-o} ++ am__minus_obj="-o $am__obj" ++ case $depmode in ++ gcc) ++ # This depmode causes a compiler race in universal mode. ++ test "$am__universal" = false || continue ++ ;; ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue + else +- ld_shlibs=no ++ break + fi + ;; ++ msvisualcpp | msvcmsys) ++ # This compiler won't grok `-c -o', but also, the minuso test has ++ # not run yet. These depmodes are late enough in the game, and ++ # so weak that their functioning should not be impacted. ++ am__obj=conftest.${OBJEXT-o} ++ am__minus_obj= ++ ;; ++ none) break ;; + esac +- +- if test "$ld_shlibs" = yes; then +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec= ++ if depmode=$depmode \ ++ source=sub/conftest.c object=$am__obj \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_CXX_dependencies_compiler_type=$depmode ++ break + fi + fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag=unsupported +- always_export_symbols=yes +- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct=unsupported +- fi +- ;; +- +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no +- +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- esac ++ done + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_CXX_dependencies_compiler_type=none ++fi + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 ++$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } ++CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + +- archive_cmds='' +- hardcode_direct=yes +- hardcode_libdir_separator=':' +- link_all_deplibs=yes ++ if ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then ++ am__fastdepCXX_TRUE= ++ am__fastdepCXX_FALSE='#' ++else ++ am__fastdepCXX_TRUE='#' ++ am__fastdepCXX_FALSE= ++fi + +- if test "$GCC" = yes; then +- case $host_os in aix4.012|aix4.012.*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- hardcode_direct=yes +- else +- # We have old collect2 +- hardcode_direct=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L=yes +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_libdir_separator= +- fi +- esac +- shared_flag='-shared' +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ ac_ext=cpp ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 ++$as_echo_n "checking how to run the C++ preprocessor... " >&6; } ++if test -z "$CXXCPP"; then ++ if test "${ac_cv_prog_CXXCPP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ # Double quotes because CXXCPP needs to be expanded ++ for CXXCPP in "$CXX -E" "/lib/cpp" ++ do ++ ac_preproc_ok=false ++for ac_cxx_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +- +-int +-main () +-{ +- +- ; +- return 0; +-} ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ Syntax error + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++if ac_fn_cxx_try_cpp "$LINENO"; then : + +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'`; fi + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- ++ # Broken: fails on valid input. ++continue + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++rm -f conftest.err conftest.i conftest.$ac_ext + +- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag="-z nodefs" +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ ++#include ++_ACEOF ++if ac_fn_cxx_try_cpp "$LINENO"; then : ++ # Broken: success on invalid input. ++continue ++else ++ # Passes both tests. ++ac_preproc_ok=: ++break ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext + +-int +-main () +-{ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.i conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then : ++ break ++fi + +- ; +- return 0; +-} ++ done ++ ac_cv_prog_CXXCPP=$CXXCPP + -+ECHO=${lt_ECHO-echo} -+if test "X[$]1" = X--no-reexec; then -+ # Discard the --no-reexec flag, and continue. -+ shift -+elif test "X[$]1" = X--fallback-echo; then -+ # Avoid inline document here, it may be left over -+ : -+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then -+ # Yippee, $ECHO works! -+ : ++fi ++ CXXCPP=$ac_cv_prog_CXXCPP ++else ++ ac_cv_prog_CXXCPP=$CXXCPP ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 ++$as_echo "$CXXCPP" >&6; } ++ac_preproc_ok=false ++for ac_cxx_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ Syntax error + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++if ac_fn_cxx_try_cpp "$LINENO"; then : + +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'`; fi + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ # Broken: fails on valid input. ++continue ++fi ++rm -f conftest.err conftest.i conftest.$ac_ext + ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++_ACEOF ++if ac_fn_cxx_try_cpp "$LINENO"; then : ++ # Broken: success on invalid input. ++continue ++else ++ # Passes both tests. ++ac_preproc_ok=: ++break + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++rm -f conftest.err conftest.i conftest.$ac_ext + +- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag=' ${wl}-bernotok' +- allow_undefined_flag=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- always_export_symbols=yes +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec=' ' +- archive_cmds_need_lc=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.i conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then : + +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs=no +- ;; ++else ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 ++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} ++_lt_caught_CXX_error=yes; } ++fi + +- bsdi4*) +- export_dynamic_flag_spec=-rdynamic +- ;; ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_From_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes=yes +- ;; ++else ++ _lt_caught_CXX_error=yes ++fi + +- darwin* | rhapsody*) +- if test "$GXX" = yes ; then +- archive_cmds_need_lc=no +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- allow_undefined_flag='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_cmds='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- archive_cmds='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- module_cmds='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- hardcode_direct=no +- hardcode_automatic=yes +- hardcode_shlibpath_var=unsupported +- whole_archive_flag_spec='-all_load $convenience' +- link_all_deplibs=yes +- else +- ld_shlibs=no +- fi +- ;; + +- dgux*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; + +- freebsd1*) +- ld_shlibs=no +- ;; + +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no +- ;; ++# Set options + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; + +- hpux9*) +- if test "$GCC" = yes; then +- archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_direct=yes + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L=yes +- export_dynamic_flag_spec='${wl}-E' +- ;; ++ enable_dlopen=no + +- hpux10* | hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*|ia64*) +- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case "$host_cpu" in +- hppa*64*|ia64*) +- archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' +- ;; +- *) +- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*) +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_flag_spec_ld='+b $libdir' +- hardcode_libdir_separator=: +- hardcode_direct=no +- hardcode_shlibpath_var=no +- ;; +- ia64*) +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_direct=no +- hardcode_shlibpath_var=no + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L=yes +- ;; +- *) +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_direct=yes +- export_dynamic_flag_spec='${wl}-E' ++ enable_win32_dll=no + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L=yes +- ;; +- esac +- fi +- ;; + +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_ld='-rpath $libdir' +- fi +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- link_all_deplibs=yes ++ # Check whether --enable-shared was given. ++if test "${enable_shared+set}" = set; then : ++ enableval=$enable_shared; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; ++ esac ++else ++ enable_shared=yes ++fi + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; + +- newsos6) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_shlibpath_var=no +- ;; +- +- openbsd*) +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- export_dynamic_flag_spec='${wl}-E' +- else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- ;; +- *) +- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- ;; + +- os2*) +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- allow_undefined_flag=unsupported +- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; + +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- ;; + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + +- # Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec='-rpath $libdir' +- fi +- hardcode_libdir_separator=: +- ;; + +- sco3.2v5*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- export_dynamic_flag_spec='${wl}-Bexport' +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ;; + +- solaris*) +- no_undefined_flag=' -z text' +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_shlibpath_var=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; +- esac +- link_all_deplibs=yes +- ;; + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no ++ # Check whether --enable-static was given. ++if test "${enable_static+set}" = set; then : ++ enableval=$enable_static; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; ++ esac +else -+ # Restart under the correct shell. -+ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -+fi -+ -+if test "X[$]1" = X--fallback-echo; then -+ # used as fallback echo -+ shift -+ cat <<_LT_EOF -+[$]* -+_LT_EOF -+ exit 0 ++ enable_static=yes +fi + +- sysv4) +- case $host_vendor in +- sni) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- reload_cmds='$CC -r -o $output$reload_objs' +- hardcode_direct=no +- ;; +- motorola) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var=no +- ;; + +- sysv4.3*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- export_dynamic_flag_spec='-Bexport' +- ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs=yes +- fi +- ;; + +- sysv4.2uw2*) +- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_minus_L=no +- hardcode_shlibpath_var=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; + +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) +- no_undefined_flag='${wl}-z ${wl}text' +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var=no +- ;; + +- sysv5*) +- no_undefined_flag=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec= +- hardcode_shlibpath_var=no +- runpath_var='LD_RUN_PATH' +- ;; + +- uts4*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; + +- *) +- ld_shlibs=no +- ;; +- esac +- fi + +-echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +-echo "${ECHO_T}$ld_shlibs" >&6 +-test "$ld_shlibs" = no && can_build_shared=no + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++# Check whether --with-pic was given. ++if test "${with_pic+set}" = set; then : ++ withval=$with_pic; pic_mode="$withval" ++else ++ pic_mode=default + fi + +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc=yes + +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 +- $rm conftest* +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++test -z "$pic_mode" && pic_mode=default + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag +- allow_undefined_flag= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc=no +- else +- archive_cmds_need_lc=yes +- fi +- allow_undefined_flag=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc" >&6 + -+# The HP-UX ksh and POSIX shell print the target directory to stdout -+# if CDPATH is set. -+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -+ -+if test -z "$lt_ECHO"; then -+ if test "X${echo_test_string+set}" != Xset; then -+ # find a string as large as possible, as long as the shell can cope with it -+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do -+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... -+ if { echo_test_string=`eval $cmd`; } 2>/dev/null && -+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null -+ then -+ break -+ fi -+ done -+ fi + -+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ : -+ else -+ # The Solaris, AIX, and Digital Unix default echo programs unquote -+ # backslashes. This makes it impossible to quote backslashes using -+ # echo "$something" | sed 's/\\/\\\\/g' -+ # -+ # So, first we look for a working echo in the user's PATH. + -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+ for dir in $PATH /usr/ucb; do -+ IFS="$lt_save_ifs" -+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && -+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ ECHO="$dir/echo" -+ break -+ fi -+ done -+ IFS="$lt_save_ifs" + -+ if test "X$ECHO" = Xecho; then -+ # We didn't find a better echo, so look for alternatives. -+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ # This shell has a builtin print -r that does the trick. -+ ECHO='print -r' -+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && -+ test "X$CONFIG_SHELL" != X/bin/ksh; then -+ # If we have ksh, try running configure again with it. -+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} -+ export ORIGINAL_CONFIG_SHELL -+ CONFIG_SHELL=/bin/ksh -+ export CONFIG_SHELL -+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} -+ else -+ # Try using printf. -+ ECHO='printf %s\n' -+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && -+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ # Cool, printf works -+ : -+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && -+ test "X$echo_testing_string" = 'X\t' && -+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL -+ export CONFIG_SHELL -+ SHELL="$CONFIG_SHELL" -+ export SHELL -+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" -+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && -+ test "X$echo_testing_string" = 'X\t' && -+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && -+ test "X$echo_testing_string" = "X$echo_test_string"; then -+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" -+ else -+ # maybe with a smaller string... -+ prev=: + -+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do -+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null -+ then -+ break -+ fi -+ prev="$cmd" -+ done + -+ if test "$prev" != 'sed 50q "[$]0"'; then -+ echo_test_string=`eval $prev` -+ export echo_test_string -+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} -+ else -+ # Oops. We lost completely, so just stick with echo. -+ ECHO=echo -+ fi -+ fi -+ fi -+ fi -+ fi ++ # Check whether --enable-fast-install was given. ++if test "${enable_fast_install+set}" = set; then : ++ enableval=$enable_fast_install; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; + esac +- fi +- ;; +-esac +- +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +-if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi + else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++ enable_fast_install=yes + fi +-need_lib_prefix=unknown +-hardcode_into_libs=no + +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown + +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH + +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; + +-aix4* | aix5*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; + +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; + +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; + +-bsdi4*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; + +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes + +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' +- ;; +- esac +- ;; + +- *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' +- ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" + +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' +- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. +- if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` +- else +- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' +- fi +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-freebsd1*) +- dynamic_linker=no +- ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; + +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.01* | freebsdelf3.01*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- *) # from 3.2 on +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- esac +- ;; + +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; + +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case "$host_cpu" in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; + +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; + +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; + +-# This must be Linux ELF. +-linux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 7896 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac + +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" +- fi + +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; + +-knetbsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; + +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; + +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; + +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; + +-openbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=yes +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; + +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; + +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; + +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; + +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; + +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; + +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; ++test -z "$LN_S" && LN_S="ln -s" + +-*) +- dynamic_linker=no +- ;; +-esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 +-test "$dynamic_linker" = no && can_build_shared=no + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +-hardcode_action= +-if test -n "$hardcode_libdir_flag_spec" || \ +- test -n "$runpath_var " || \ +- test "X$hardcode_automatic"="Xyes" ; then + +- # We can hardcode non-existant directories. +- if test "$hardcode_direct" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && +- test "$hardcode_minus_L" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action=unsupported +-fi +-echo "$as_me:$LINENO: result: $hardcode_action" >&5 +-echo "${ECHO_T}$hardcode_action" >&6 + +-if test "$hardcode_action" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi + +-striplib= +-old_striplib= +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +- else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- ;; +- *) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +- ;; +- esac +-fi + +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= + +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ;; + +- mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; + +- cygwin*) +- lt_cv_dlopen="dlopen" +- lt_cv_dlopen_libs= +- ;; + +- darwin*) +- # if libdl is installed we need to link against it +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dl_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else + +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes + ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST + fi + +- ;; +- +- *) +- echo "$as_me:$LINENO: checking for shl_load" >&5 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +-if test "${ac_cv_func_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 ++$as_echo_n "checking for objdir... " >&6; } ++if test "${lt_cv_objdir+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define shl_load to an innocuous variant, in case declares shl_load. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shl_load innocuous_shl_load ++ rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs ++else ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs +fi -+ -+# Copy echo and quote the copy suitably for passing to libtool from -+# the Makefile, instead of quoting the original, which is used later. -+lt_ECHO=$ECHO -+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then -+ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" ++rmdir .libs 2>/dev/null +fi -+ -+AC_SUBST(lt_ECHO) -+]) -+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -+_LT_DECL([], [ECHO], [1], -+ [An echo program that does not interpret backslashes]) -+])# _LT_PROG_ECHO_BACKSLASH -+ -+ -+# _LT_ENABLE_LOCK -+# --------------- -+m4_defun([_LT_ENABLE_LOCK], -+[AC_ARG_ENABLE([libtool-lock], -+ [AS_HELP_STRING([--disable-libtool-lock], -+ [avoid locking (might break parallel builds)])]) -+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -+ -+# Some flags need to be propagated to the compiler or linker for good -+# libtool support. -+case $host in -+ia64-*-hpux*) -+ # Find out which ABI we are using. -+ echo 'int i;' > conftest.$ac_ext -+ if AC_TRY_EVAL(ac_compile); then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *ELF-32*) -+ HPUX_IA64_MODE="32" -+ ;; -+ *ELF-64*) -+ HPUX_IA64_MODE="64" -+ ;; -+ esac -+ fi -+ rm -rf conftest* -+ ;; -+*-*-irix6*) -+ # Find out which ABI we are using. -+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext -+ if AC_TRY_EVAL(ac_compile); then -+ if test "$lt_cv_prog_gnu_ld" = yes; then -+ case `/usr/bin/file conftest.$ac_objext` in -+ *32-bit*) -+ LD="${LD-ld} -melf32bsmip" -+ ;; -+ *N32*) -+ LD="${LD-ld} -melf32bmipn32" -+ ;; -+ *64-bit*) -+ LD="${LD-ld} -melf64bmip" -+ ;; -+ esac -+ else -+ case `/usr/bin/file conftest.$ac_objext` in -+ *32-bit*) -+ LD="${LD-ld} -32" -+ ;; -+ *N32*) -+ LD="${LD-ld} -n32" -+ ;; -+ *64-bit*) -+ LD="${LD-ld} -64" -+ ;; -+ esac -+ fi -+ fi -+ rm -rf conftest* -+ ;; -+ -+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -+s390*-*linux*|s390*-*tpf*|sparc*-*linux*) -+ # Find out which ABI we are using. -+ echo 'int i;' > conftest.$ac_ext -+ if AC_TRY_EVAL(ac_compile); then -+ case `/usr/bin/file conftest.o` in -+ *32-bit*) -+ case $host in -+ x86_64-*kfreebsd*-gnu) -+ LD="${LD-ld} -m elf_i386_fbsd" -+ ;; -+ x86_64-*linux*) -+ LD="${LD-ld} -m elf_i386" -+ ;; -+ ppc64-*linux*|powerpc64-*linux*) -+ LD="${LD-ld} -m elf32ppclinux" -+ ;; -+ s390x-*linux*) -+ LD="${LD-ld} -m elf_s390" -+ ;; -+ sparc64-*linux*) -+ LD="${LD-ld} -m elf32_sparc" -+ ;; -+ esac -+ ;; -+ *64-bit*) -+ case $host in -+ x86_64-*kfreebsd*-gnu) -+ LD="${LD-ld} -m elf_x86_64_fbsd" -+ ;; -+ x86_64-*linux*) -+ LD="${LD-ld} -m elf_x86_64" -+ ;; -+ ppc*-*linux*|powerpc*-*linux*) -+ LD="${LD-ld} -m elf64ppc" -+ ;; -+ s390*-*linux*|s390*-*tpf*) -+ LD="${LD-ld} -m elf64_s390" -+ ;; -+ sparc*-*linux*) -+ LD="${LD-ld} -m elf64_sparc" -+ ;; -+ esac -+ ;; -+ esac -+ fi -+ rm -rf conftest* -+ ;; -+ -+*-*-sco3.2v5*) -+ # On SCO OpenServer 5, we need -belf to get full-featured binaries. -+ SAVE_CFLAGS="$CFLAGS" -+ CFLAGS="$CFLAGS -belf" -+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, -+ [AC_LANG_PUSH(C) -+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) -+ AC_LANG_POP]) -+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then -+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf -+ CFLAGS="$SAVE_CFLAGS" -+ fi -+ ;; -+sparc*-*solaris*) -+ # Find out which ABI we are using. -+ echo 'int i;' > conftest.$ac_ext -+ if AC_TRY_EVAL(ac_compile); then -+ case `/usr/bin/file conftest.o` in -+ *64-bit*) -+ case $lt_cv_prog_gnu_ld in -+ yes*) LD="${LD-ld} -m elf64_sparc" ;; -+ *) -+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then -+ LD="${LD-ld} -64" -+ fi -+ ;; -+ esac -+ ;; -+ esac ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 ++$as_echo "$lt_cv_objdir" >&6; } ++objdir=$lt_cv_objdir + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shl_load (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef shl_load + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_shl_load) || defined (__stub___shl_load) +-choke me +-#else +-char (*f) () = shl_load; +-#endif +-#ifdef __cplusplus +-} +-#endif + +-int +-main () +-{ +-return f != shl_load; +- ; +- return 0; +-} ++cat >>confdefs.h <<_ACEOF ++#define LT_OBJDIR "$lt_cv_objdir/" + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +-if test $ac_cv_func_shl_load = yes; then +- lt_cv_dlopen="shl_load" +-else +- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-int +-main () +-{ +-shl_load (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dld_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +-if test $ac_cv_lib_dld_shl_load = yes; then +- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +-else +- echo "$as_me:$LINENO: checking for dlopen" >&5 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +-if test "${ac_cv_func_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define dlopen to an innocuous variant, in case declares dlopen. +- For example, HP-UX 11i declares gettimeofday. */ +-#define dlopen innocuous_dlopen + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char dlopen (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef dlopen + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_dlopen) || defined (__stub___dlopen) +-choke me +-#else +-char (*f) () = dlopen; +-#endif +-#ifdef __cplusplus +-} +-#endif + +-int +-main () +-{ +-return f != dlopen; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +-if test $ac_cv_func_dlopen = yes; then +- lt_cv_dlopen="dlopen" +-else +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dl_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +-if test "${ac_cv_lib_svld_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lsvld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_svld_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_svld_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +-if test $ac_cv_lib_svld_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +-else +- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_dld_link+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dld_link (); +-int +-main () +-{ +-dld_link (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_dld_link=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dld_dld_link=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +-if test $ac_cv_lib_dld_dld_link = yes; then +- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +-fi + + +-fi ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES + fi -+ rm -rf conftest* + ;; +esac -+ -+need_locks="$enable_libtool_lock" -+])# _LT_ENABLE_LOCK -+ -+ -+# _LT_CMD_OLD_ARCHIVE -+# ------------------- -+m4_defun([_LT_CMD_OLD_ARCHIVE], -+[AC_CHECK_TOOL(AR, ar, false) -+test -z "$AR" && AR=ar -+test -z "$AR_FLAGS" && AR_FLAGS=cru -+_LT_DECL([], [AR], [1], [The archiver]) -+_LT_DECL([], [AR_FLAGS], [1]) -+ -+AC_CHECK_TOOL(STRIP, strip, :) -+test -z "$STRIP" && STRIP=: -+_LT_DECL([], [STRIP], [1], [A symbol stripping program]) -+ -+AC_CHECK_TOOL(RANLIB, ranlib, :) -+test -z "$RANLIB" && RANLIB=: -+_LT_DECL([], [RANLIB], [1], -+ [Commands used to install an old-style archive]) -+ -+# Determine commands to create old-style static archives. -+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -+old_postinstall_cmds='chmod 644 $oldlib' -+old_postuninstall_cmds= -+ -+if test -n "$RANLIB"; then -+ case $host_os in -+ openbsd*) -+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" -+ ;; -+ *) -+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" -+ ;; -+ esac -+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -+fi -+_LT_DECL([], [old_postinstall_cmds], [2]) -+_LT_DECL([], [old_postuninstall_cmds], [2]) -+_LT_TAGDECL([], [old_archive_cmds], [2], -+ [Commands used to build an old-style archive]) -+])# _LT_CMD_OLD_ARCHIVE -+ -+ -+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -+# ---------------------------------------------------------------- -+# Check whether the given compiler option works -+AC_DEFUN([_LT_COMPILER_OPTION], -+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_DECL_SED])dnl -+AC_CACHE_CHECK([$1], [$2], -+ [$2=no -+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+ lt_compiler_flag="$3" -+ # Insert the option either (1) after the last *FLAGS variable, or -+ # (2) before a word containing "conftest.", or (3) at the end. -+ # Note that $ac_compile itself does not contain backslashes and begins -+ # with a dollar sign (not a hyphen), so the echo should work correctly. -+ # The option is referenced via a variable to avoid confusing sed. -+ lt_compile=`echo "$ac_compile" | $SED \ -+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -+ -e 's:$: $lt_compiler_flag:'` -+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) -+ (eval "$lt_compile" 2>conftest.err) -+ ac_status=$? -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD -+ if (exit $ac_status) && test -s "$ac_outfile"; then -+ # The compiler can only warn and ignore the option if not recognized -+ # So say no if there are warnings other than the usual output. -+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp -+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 -+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then -+ $2=yes -+ fi -+ fi -+ $RM conftest* -+]) -+ -+if test x"[$]$2" = xyes; then -+ m4_if([$5], , :, [$5]) -+else -+ m4_if([$6], , :, [$6]) -+fi -+])# _LT_COMPILER_OPTION -+ -+# Old name: -+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) -+ -+ -+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -+# [ACTION-SUCCESS], [ACTION-FAILURE]) -+# ---------------------------------------------------- -+# Check whether the given linker option works -+AC_DEFUN([_LT_LINKER_OPTION], -+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_DECL_SED])dnl -+AC_CACHE_CHECK([$1], [$2], -+ [$2=no -+ save_LDFLAGS="$LDFLAGS" -+ LDFLAGS="$LDFLAGS $3" -+ echo "$lt_simple_link_test_code" > conftest.$ac_ext -+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then -+ # The linker can only warn and ignore the option if not recognized -+ # So say no if there are warnings -+ if test -s conftest.err; then -+ # Append any errors to the config.log. -+ cat conftest.err 1>&AS_MESSAGE_LOG_FD -+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp -+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 -+ if diff conftest.exp conftest.er2 >/dev/null; then -+ $2=yes -+ fi -+ else -+ $2=yes -+ fi -+ fi -+ $RM -r conftest* -+ LDFLAGS="$save_LDFLAGS" -+]) -+ -+if test x"[$]$2" = xyes; then -+ m4_if([$4], , :, [$4]) -+else -+ m4_if([$5], , :, [$5]) -+fi -+])# _LT_LINKER_OPTION -+ -+# Old name: -+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) -+ -+ -+# LT_CMD_MAX_LEN -+#--------------- -+AC_DEFUN([LT_CMD_MAX_LEN], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+# find the maximum length of command line arguments -+AC_MSG_CHECKING([the maximum length of command line arguments]) -+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl -+ i=0 -+ teststring="ABCD" -+ -+ case $build_os in -+ msdosdjgpp*) -+ # On DJGPP, this test can blow up pretty badly due to problems in libc -+ # (any single argument exceeding 2000 bytes causes a buffer overrun -+ # during glob expansion). Even if it were fixed, the result of this -+ # check would be larger than it should be. -+ lt_cv_sys_max_cmd_len=12288; # 12K is about right -+ ;; -+ -+ gnu*) -+ # Under GNU Hurd, this test is not required because there is -+ # no limit to the length of command line arguments. -+ # Libtool will interpret -1 as no limit whatsoever -+ lt_cv_sys_max_cmd_len=-1; -+ ;; -+ -+ cygwin* | mingw* | cegcc*) -+ # On Win9x/ME, this test blows up -- it succeeds, but takes -+ # about 5 minutes as the teststring grows exponentially. -+ # Worse, since 9x/ME are not pre-emptively multitasking, -+ # you end up with a "frozen" computer, even though with patience -+ # the test eventually succeeds (with a max line length of 256k). -+ # Instead, let's just punt: use the minimum linelength reported by -+ # all of the supported platforms: 8192 (on NT/2K/XP). -+ lt_cv_sys_max_cmd_len=8192; -+ ;; -+ -+ amigaos*) -+ # On AmigaOS with pdksh, this test takes hours, literally. -+ # So we just punt and use a minimum line length of 8192. -+ lt_cv_sys_max_cmd_len=8192; -+ ;; -+ -+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) -+ # This has been around since 386BSD, at least. Likely further. -+ if test -x /sbin/sysctl; then -+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` -+ elif test -x /usr/sbin/sysctl; then -+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` -+ else -+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs -+ fi -+ # And add a safety zone -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` -+ ;; -+ -+ interix*) -+ # We know the value 262144 and hardcode it with a safety zone (like BSD) -+ lt_cv_sys_max_cmd_len=196608 -+ ;; -+ -+ osf*) -+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure -+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not -+ # nice to cause kernel panics so lets avoid the loop below. -+ # First set a reasonable default. -+ lt_cv_sys_max_cmd_len=16384 -+ # -+ if test -x /sbin/sysconfig; then -+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in -+ *1*) lt_cv_sys_max_cmd_len=-1 ;; -+ esac -+ fi -+ ;; -+ sco3.2v5*) -+ lt_cv_sys_max_cmd_len=102400 -+ ;; -+ sysv5* | sco5v6* | sysv4.2uw2*) -+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` -+ if test -n "$kargmax"; then -+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` -+ else -+ lt_cv_sys_max_cmd_len=32768 -+ fi -+ ;; -+ *) -+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` -+ if test -n "$lt_cv_sys_max_cmd_len"; then -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` -+ else -+ # Make teststring a little bigger before we do anything with it. -+ # a 1K string should be a reasonable start. -+ for i in 1 2 3 4 5 6 7 8 ; do -+ teststring=$teststring$teststring -+ done -+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} -+ # If test is not a shell built-in, we'll probably end up computing a -+ # maximum length that is only half of the actual maximum length, but -+ # we can't tell. -+ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ -+ = "XX$teststring$teststring"; } >/dev/null 2>&1 && -+ test $i != 17 # 1/2 MB should be enough -+ do -+ i=`expr $i + 1` -+ teststring=$teststring$teststring -+ done -+ # Only check the string length outside the loop. -+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` -+ teststring= -+ # Add a significant safety factor because C++ compilers can tack on -+ # massive amounts of additional arguments before passing them to the -+ # linker. It appears as though 1/2 is a usable value. -+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` -+ fi -+ ;; + ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++sed_quote_subst='s/$["`$\\]$/\\\1/g' + +-fi ++# Same as above, but do not quote variable references. ++double_quote_subst='s/$["`\\]$/\\\1/g' + ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +-fi ++# Sed substitution to delay expansion of an escaped single quote. ++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' + +-fi ++# Global variables: ++ofile=libtool ++can_build_shared=yes + ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a + +-fi ++with_gnu_ld="$lt_cv_prog_gnu_ld" + +- ;; +- esac ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" + +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no +- fi ++# Set sane defaults for various variables ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$LD" && LD=ld ++test -z "$ac_objext" && ac_objext=o + +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +- +- save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; + esac -+]) -+if test -n $lt_cv_sys_max_cmd_len ; then -+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -+else -+ AC_MSG_RESULT(none) -+fi -+max_cmd_len=$lt_cv_sys_max_cmd_len -+_LT_DECL([], [max_cmd_len], [0], -+ [What is the maximum length of a command?]) -+])# LT_CMD_MAX_LEN -+ -+# Old name: -+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) -+ ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" + +- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++# Only perform the check for file, if the check method requires it ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 ++$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self=cross ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/${ac_tool_prefix}file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 + -+# _LT_HEADER_DLFCN -+# ---------------- -+m4_defun([_LT_HEADER_DLFCN], -+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl -+])# _LT_HEADER_DLFCN ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org + ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi + -+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -+# ---------------------------------------------------------------- -+m4_defun([_LT_TRY_DLOPEN_SELF], -+[m4_require([_LT_HEADER_DLFCN])dnl -+if test "$cross_compiling" = yes; then : -+ [$4] ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 ++$as_echo "$MAGIC_CMD" >&6; } + else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext <&5 ++$as_echo "no" >&6; } ++fi + +-#if HAVE_DLFCN_H +-#include +-#endif + +-#include + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 ++$as_echo_n "checking for file... " >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : ++ $as_echo_n "(cached) " >&6 +else -+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 -+ lt_status=$lt_dlunknown -+ cat > conftest.$ac_ext <<_LT_EOF -+[#line __oline__ "configure" -+#include "confdefs.h" -+ -+#if HAVE_DLFCN_H -+#include -+#endif -+ -+#include -+ -+#ifdef RTLD_GLOBAL -+# define LT_DLGLOBAL RTLD_GLOBAL -+#else -+# ifdef DL_GLOBAL -+# define LT_DLGLOBAL DL_GLOBAL -+# else -+# define LT_DLGLOBAL 0 -+# endif -+#endif -+ -+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we -+ find out it does not work in some platform. */ -+#ifndef LT_DLLAZY_OR_NOW -+# ifdef RTLD_LAZY -+# define LT_DLLAZY_OR_NOW RTLD_LAZY -+# else -+# ifdef DL_LAZY -+# define LT_DLLAZY_OR_NOW DL_LAZY -+# else -+# ifdef RTLD_NOW -+# define LT_DLLAZY_OR_NOW RTLD_NOW -+# else -+# ifdef DL_NOW -+# define LT_DLLAZY_OR_NOW DL_NOW -+# else -+# define LT_DLLAZY_OR_NOW 0 -+# endif -+# endif -+# endif -+# endif -+#endif -+ -+void fnord() { int i=42;} -+int main () -+{ -+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); -+ int status = $lt_dlunknown; -+ -+ if (self) -+ { -+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; -+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; -+ /* dlclose (self); */ -+ } -+ else -+ puts (dlerror ()); -+ -+ return status; -+}] ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } +_LT_EOF -+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then -+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null -+ lt_status=$? -+ case x$lt_status in -+ x$lt_dlno_uscore) $1 ;; -+ x$lt_dlneed_uscore) $2 ;; -+ x$lt_dlunknown|x*) $3 ;; -+ esac -+ else : -+ # compilation failed -+ $3 -+ fi ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac +fi -+rm -fr conftest* -+])# _LT_TRY_DLOPEN_SELF + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self=no +- fi ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 ++$as_echo "$MAGIC_CMD" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi +-rm -fr conftest* + + ++ else ++ MAGIC_CMD=: ++ fi + fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + +- if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" +- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self_static+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self_static=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif ++# Use C for the default configuration in the libtool script + +-#include ++lt_save_CC="$CC" ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++# Source file extension for C test sources. ++ac_ext=c + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif ++# Object file extension for compiled C test sources. ++objext=o ++objext=$objext + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self_static=no +- fi +-fi +-rm -fr conftest* + + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 +- fi + +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac + +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac + +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; +- esac +-fi + ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + +-# Report which librarie types wil actually be built +-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-echo "${ECHO_T}$can_build_shared" >&6 +- +-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 +-test "$can_build_shared" = "no" && enable_shared=no +- +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case "$host_os" in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-aix4* | aix5*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi +- ;; +- darwin* | rhapsody*) +- if test "$GCC" = yes; then +- archive_cmds_need_lc=no +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- allow_undefined_flag='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- output_verbose_link_cmd='echo' +- archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' +- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- hardcode_direct=no +- hardcode_automatic=yes +- hardcode_shlibpath_var=unsupported +- whole_archive_flag_spec='-all_load $convenience' +- link_all_deplibs=yes +- else +- ld_shlibs=no +- fi +- ;; +-esac +-echo "$as_me:$LINENO: result: $enable_shared" >&5 +-echo "${ECHO_T}$enable_shared" >&6 ++# Allow CC to be a program name with arguments. ++compiler=$CC + +-echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-echo "$as_me:$LINENO: result: $enable_static" >&5 +-echo "${ECHO_T}$enable_static" >&6 +- +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler \ +- CC \ +- LD \ +- lt_prog_compiler_wl \ +- lt_prog_compiler_pic \ +- lt_prog_compiler_static \ +- lt_prog_compiler_no_builtin_flag \ +- export_dynamic_flag_spec \ +- thread_safe_flag_spec \ +- whole_archive_flag_spec \ +- enable_shared_with_static_runtimes \ +- old_archive_cmds \ +- old_archive_from_new_cmds \ +- predep_objects \ +- postdep_objects \ +- predeps \ +- postdeps \ +- compiler_lib_search_path \ +- archive_cmds \ +- archive_expsym_cmds \ +- postinstall_cmds \ +- postuninstall_cmds \ +- old_archive_from_expsyms_cmds \ +- allow_undefined_flag \ +- no_undefined_flag \ +- export_symbols_cmds \ +- hardcode_libdir_flag_spec \ +- hardcode_libdir_flag_spec_ld \ +- hardcode_libdir_separator \ +- hardcode_automatic \ +- module_cmds \ +- module_expsym_cmds \ +- lt_cv_prog_compiler_c_o \ +- exclude_expsyms \ +- include_expsyms; do +- +- case $var in +- old_archive_cmds | \ +- old_archive_from_new_cmds | \ +- archive_cmds | \ +- archive_expsym_cmds | \ +- module_cmds | \ +- module_expsym_cmds | \ +- old_archive_from_expsyms_cmds | \ +- export_symbols_cmds | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done ++# Save the default compiler, since it gets overwritten when the other ++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. ++compiler_DEFAULT=$CC + ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$RM conftest* + -+# LT_SYS_DLOPEN_SELF -+# ------------------ -+AC_DEFUN([LT_SYS_DLOPEN_SELF], -+[m4_require([_LT_HEADER_DLFCN])dnl -+if test "x$enable_dlopen" != xyes; then -+ enable_dlopen=unknown -+ enable_dlopen_self=unknown -+ enable_dlopen_self_static=unknown ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$RM -r conftest* + +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac + +-cfgfile="${ofile}T" +- trap "$rm \"$cfgfile\"; exit 1" 1 2 15 +- $rm -f "$cfgfile" +- { echo "$as_me:$LINENO: creating $ofile" >&5 +-echo "$as_me: creating $ofile" >&6;} ++if test -n "$compiler"; then + +- cat <<__EOF__ >> "$cfgfile" +-#! $SHELL ++lt_prog_compiler_no_builtin_flag= + +-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +-# NOTE: Changes made to this file will be lost: look at ltmain.sh. +-# +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +-# Free Software Foundation, Inc. +-# +-# This file is part of GNU Libtool: +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. ++if test "$GCC" = yes; then ++ lt_prog_compiler_no_builtin_flag=' -fno-builtin' + +-# A sed program that does not truncate output. +-SED=$lt_SED ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } ++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then : ++ $as_echo_n "(cached) " >&6 +else -+ lt_cv_dlopen=no -+ lt_cv_dlopen_libs= -+ -+ case $host_os in -+ beos*) -+ lt_cv_dlopen="load_add_on" -+ lt_cv_dlopen_libs= -+ lt_cv_dlopen_self=yes -+ ;; -+ -+ mingw* | pw32* | cegcc*) -+ lt_cv_dlopen="LoadLibrary" -+ lt_cv_dlopen_libs= -+ ;; -+ -+ cygwin*) -+ lt_cv_dlopen="dlopen" -+ lt_cv_dlopen_libs= -+ ;; -+ -+ darwin*) -+ # if libdl is installed we need to link against it -+ AC_CHECK_LIB([dl], [dlopen], -+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ -+ lt_cv_dlopen="dyld" -+ lt_cv_dlopen_libs= -+ lt_cv_dlopen_self=yes -+ ]) -+ ;; -+ -+ *) -+ AC_CHECK_FUNC([shl_load], -+ [lt_cv_dlopen="shl_load"], -+ [AC_CHECK_LIB([dld], [shl_load], -+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], -+ [AC_CHECK_FUNC([dlopen], -+ [lt_cv_dlopen="dlopen"], -+ [AC_CHECK_LIB([dl], [dlopen], -+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], -+ [AC_CHECK_LIB([svld], [dlopen], -+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], -+ [AC_CHECK_LIB([dld], [dld_link], -+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) -+ ]) -+ ]) -+ ]) -+ ]) -+ ]) -+ ;; -+ esac -+ -+ if test "x$lt_cv_dlopen" != xno; then -+ enable_dlopen=yes -+ else -+ enable_dlopen=no -+ fi -+ -+ case $lt_cv_dlopen in -+ dlopen) -+ save_CPPFLAGS="$CPPFLAGS" -+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" -+ -+ save_LDFLAGS="$LDFLAGS" -+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" -+ -+ save_LIBS="$LIBS" -+ LIBS="$lt_cv_dlopen_libs $LIBS" -+ -+ AC_CACHE_CHECK([whether a program can dlopen itself], -+ lt_cv_dlopen_self, [dnl -+ _LT_TRY_DLOPEN_SELF( -+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, -+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) -+ ]) -+ -+ if test "x$lt_cv_dlopen_self" = xyes; then -+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" -+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself], -+ lt_cv_dlopen_self_static, [dnl -+ _LT_TRY_DLOPEN_SELF( -+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, -+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) -+ ]) -+ fi -+ -+ CPPFLAGS="$save_CPPFLAGS" -+ LDFLAGS="$save_LDFLAGS" -+ LIBS="$save_LIBS" -+ ;; -+ esac -+ -+ case $lt_cv_dlopen_self in -+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; -+ *) enable_dlopen_self=unknown ;; -+ esac -+ -+ case $lt_cv_dlopen_self_static in -+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; -+ *) enable_dlopen_self_static=unknown ;; -+ esac -+fi -+_LT_DECL([dlopen_support], [enable_dlopen], [0], -+ [Whether dlopen is supported]) -+_LT_DECL([dlopen_self], [enable_dlopen_self], [0], -+ [Whether dlopen of programs is supported]) -+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], -+ [Whether dlopen of statically linked programs is supported]) -+])# LT_SYS_DLOPEN_SELF -+ -+# Old name: -+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) -+ -+ -+# _LT_COMPILER_C_O([TAGNAME]) -+# --------------------------- -+# Check to see if options -c and -o are simultaneously supported by compiler. -+# This macro does not hard code the compiler like AC_PROG_CC_C_O. -+m4_defun([_LT_COMPILER_C_O], -+[m4_require([_LT_DECL_SED])dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_TAG_COMPILER])dnl -+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], -+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], -+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no -+ $RM -r conftest 2>/dev/null -+ mkdir conftest -+ cd conftest -+ mkdir out ++ lt_cv_prog_compiler_rtti_exceptions=no ++ ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+ -+ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` -+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) -+ (eval "$lt_compile" 2>out/conftest.err) ++ (eval echo "\"\$as_me:8393: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) + ac_status=$? -+ cat out/conftest.err >&AS_MESSAGE_LOG_FD -+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD -+ if (exit $ac_status) && test -s out/conftest2.$ac_objext -+ then ++ cat conftest.err >&5 ++ echo "$as_me:8397: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized -+ # So say no if there are warnings -+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp -+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 -+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then -+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi -+ chmod u+w . 2>&AS_MESSAGE_LOG_FD -+ $RM conftest* -+ # SGI C++ compiler will create directory out/ii_files/ for -+ # template instantiation -+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files -+ $RM out/* && rmdir out -+ cd .. -+ $RM -r conftest + $RM conftest* -+]) -+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], -+ [Does compiler simultaneously support -c and -o options?]) -+])# _LT_COMPILER_C_O -+ -+ -+# _LT_COMPILER_FILE_LOCKS([TAGNAME]) -+# ---------------------------------- -+# Check to see if we can do hard links to lock some files if needed -+m4_defun([_LT_COMPILER_FILE_LOCKS], -+[m4_require([_LT_ENABLE_LOCK])dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+_LT_COMPILER_C_O([$1]) -+ -+hard_links="nottested" -+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then -+ # do not overwrite the value of need_locks provided by the user -+ AC_MSG_CHECKING([if we can lock with hard links]) -+ hard_links=yes -+ $RM conftest* -+ ln conftest.a conftest.b 2>/dev/null && hard_links=no -+ touch conftest.a -+ ln conftest.a conftest.b 2>&5 || hard_links=no -+ ln conftest.a conftest.b 2>/dev/null && hard_links=no -+ AC_MSG_RESULT([$hard_links]) -+ if test "$hard_links" = no; then -+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) -+ need_locks=warn -+ fi -+else -+ need_locks=no -+fi -+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) -+])# _LT_COMPILER_FILE_LOCKS -+ -+ -+# _LT_CHECK_OBJDIR -+# ---------------- -+m4_defun([_LT_CHECK_OBJDIR], -+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -+[rm -f .libs 2>/dev/null -+mkdir .libs 2>/dev/null -+if test -d .libs; then -+ lt_cv_objdir=.libs -+else -+ # MS-DOS does not allow filenames that begin with a dot. -+ lt_cv_objdir=_libs -+fi -+rmdir .libs 2>/dev/null]) -+objdir=$lt_cv_objdir -+_LT_DECL([], [objdir], [0], -+ [The name of the directory that contains temporary libtool files])dnl -+m4_pattern_allow([LT_OBJDIR])dnl -+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", -+ [Define to the sub-directory in which libtool stores uninstalled libraries.]) -+])# _LT_CHECK_OBJDIR -+ -+ -+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) -+# -------------------------------------- -+# Check hardcoding attributes. -+m4_defun([_LT_LINKER_HARDCODE_LIBPATH], -+[AC_MSG_CHECKING([how to hardcode library paths into programs]) -+_LT_TAGVAR(hardcode_action, $1)= -+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || -+ test -n "$_LT_TAGVAR(runpath_var, $1)" || -+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then -+ -+ # We can hardcode non-existent directories. -+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && -+ # If the only mechanism to avoid hardcoding is shlibpath_var, we -+ # have to relink, otherwise we might link with an installed library -+ # when we should be linking with a yet-to-be-installed one -+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && -+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then -+ # Linking always hardcodes the temporary library directory. -+ _LT_TAGVAR(hardcode_action, $1)=relink -+ else -+ # We can link without hardcoding, and we can hardcode nonexisting dirs. -+ _LT_TAGVAR(hardcode_action, $1)=immediate -+ fi -+else -+ # We cannot hardcode anything, or else we can only hardcode existing -+ # directories. -+ _LT_TAGVAR(hardcode_action, $1)=unsupported -+fi -+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) -+ -+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || -+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then -+ # Fast installation is not supported -+ enable_fast_install=no -+elif test "$shlibpath_overrides_runpath" = yes || -+ test "$enable_shared" = no; then -+ # Fast installation is not necessary -+ enable_fast_install=needless -+fi -+_LT_TAGDECL([], [hardcode_action], [0], -+ [How to hardcode a shared library path into an executable]) -+])# _LT_LINKER_HARDCODE_LIBPATH -+ -+ -+# _LT_CMD_STRIPLIB -+# ---------------- -+m4_defun([_LT_CMD_STRIPLIB], -+[m4_require([_LT_DECL_EGREP]) -+striplib= -+old_striplib= -+AC_MSG_CHECKING([whether stripping libraries is possible]) -+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then -+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" -+ test -z "$striplib" && striplib="$STRIP --strip-unneeded" -+ AC_MSG_RESULT([yes]) -+else -+# FIXME - insert some real tests, host_os isn't really good enough -+ case $host_os in -+ darwin*) -+ if test -n "$STRIP" ; then -+ striplib="$STRIP -x" -+ old_striplib="$STRIP -S" -+ AC_MSG_RESULT([yes]) -+ else -+ AC_MSG_RESULT([no]) -+ fi -+ ;; -+ *) -+ AC_MSG_RESULT([no]) -+ ;; -+ esac + +-# Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="$SED -e s/^X//" +fi -+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) -+_LT_DECL([], [striplib], [1]) -+])# _LT_CMD_STRIPLIB -+ -+ -+# _LT_SYS_DYNAMIC_LINKER([TAG]) -+# ----------------------------- -+# PORTME Fill in your ld.so characteristics -+m4_defun([_LT_SYS_DYNAMIC_LINKER], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+m4_require([_LT_DECL_EGREP])dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_DECL_OBJDUMP])dnl -+m4_require([_LT_DECL_SED])dnl -+AC_MSG_CHECKING([dynamic linker characteristics]) -+m4_if([$1], -+ [], [ -+if test "$GCC" = yes; then -+ case $host_os in -+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; -+ *) lt_awk_arg="/^libraries:/" ;; -+ esac -+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` -+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then -+ # if the path contains ";" then we assume it to be the separator -+ # otherwise default to the standard path separator (i.e. ":") - it is -+ # assumed that no part of a normal pathname contains ";" but that should -+ # okay in the real world where ";" in dirpaths is itself problematic. -+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` -+ else -+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` -+ fi -+ # Ok, now we have the path, separated by spaces, we can step through it -+ # and add multilib dir if necessary. -+ lt_tmp_lt_search_path_spec= -+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` -+ for lt_sys_path in $lt_search_path_spec; do -+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then -+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" -+ else -+ test -d "$lt_sys_path" && \ -+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" -+ fi -+ done -+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' -+BEGIN {RS=" "; FS="/|\n";} { -+ lt_foo=""; -+ lt_count=0; -+ for (lt_i = NF; lt_i > 0; lt_i--) { -+ if ($lt_i != "" && $lt_i != ".") { -+ if ($lt_i == "..") { -+ lt_count++; -+ } else { -+ if (lt_count == 0) { -+ lt_foo="/" $lt_i lt_foo; -+ } else { -+ lt_count--; -+ } -+ } -+ } -+ } -+ if (lt_foo != "") { lt_freq[[lt_foo]]++; } -+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -+}'` -+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then ++ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else -+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -+fi]) -+library_names_spec= -+libname_spec='lib$name' -+soname_spec= -+shrext_cmds=".so" -+postinstall_cmds= -+postuninstall_cmds= -+finish_cmds= -+finish_eval= -+shlibpath_var= -+shlibpath_overrides_runpath=unknown -+version_type=none -+dynamic_linker="$host_os ld.so" -+sys_lib_dlsearch_path_spec="/lib /usr/lib" -+need_lib_prefix=unknown -+hardcode_into_libs=no -+ -+# when you set need_version to no, make sure it does not cause -set_version -+# flags to be left without arguments -+need_version=unknown -+ -+case $host_os in -+aix3*) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' -+ shlibpath_var=LIBPATH -+ -+ # AIX 3 has no versioning support, so we append a major version to the name. -+ soname_spec='${libname}${release}${shared_ext}$major' -+ ;; -+ -+aix[[4-9]]*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ hardcode_into_libs=yes -+ if test "$host_cpu" = ia64; then -+ # AIX 5 supports IA64 -+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ else -+ # With GCC up to 2.95.x, collect2 would create an import file -+ # for dependence libraries. The import file would start with -+ # the line `#! .'. This would cause the generated library to -+ # depend on `.', always an invalid library. This was fixed in -+ # development snapshots of GCC prior to 3.0. ++ : ++fi + +-# The names of the tagged configurations supported by this script. +-available_tags= ++fi + +-# ### BEGIN LIBTOOL CONFIG + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc ++ lt_prog_compiler_wl= ++lt_prog_compiler_pic= ++lt_prog_compiler_static= + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 ++$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_static='-static' + +-# The host system. +-host_alias=$host_alias +-host=$host + case $host_os in -+ aix4 | aix4.[[01]] | aix4.[[01]].*) -+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' -+ echo ' yes ' -+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then -+ : -+ else -+ can_build_shared=no ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' + fi + ;; -+ esac -+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct -+ # soname into executable. Probably we can add versioning support to -+ # collect2, so additional links can be useful in future. -+ if test "$aix_use_runtimelinking" = yes; then -+ # If using run time linking (on AIX 4.2 or later) use lib.so -+ # instead of lib.a to let people know that these are not -+ # typical AIX shared libraries. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ else -+ # We preserve .a as extension for shared libraries through AIX4.2 -+ # and later when we are not doing run time linking. -+ library_names_spec='${libname}${release}.a $libname.a' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ fi -+ shlibpath_var=LIBPATH -+ fi -+ ;; -+ -+amigaos*) -+ case $host_cpu in -+ powerpc) -+ # Since July 2007 AmigaOS4 officially supports .so libraries. -+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ ;; -+ m68k) -+ library_names_spec='$libname.ixlibrary $libname.a' -+ # Create ${libname}_ixlibrary.a entries in /sys/libs. -+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/$[[^/]]*$\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' -+ ;; -+ esac -+ ;; -+ -+beos*) -+ library_names_spec='${libname}${shared_ext}' -+ dynamic_linker="$host_os ld.so" -+ shlibpath_var=LIBRARY_PATH -+ ;; -+ -+bsdi[[45]]*) -+ version_type=linux -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" -+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" -+ # the default ld.so.conf also contains /usr/contrib/lib and -+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow -+ # libtool to hard-code these into programs -+ ;; -+ -+cygwin* | mingw* | pw32* | cegcc*) -+ version_type=windows -+ shrext_cmds=".dll" -+ need_version=no -+ need_lib_prefix=no -+ -+ case $GCC,$host_os in -+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) -+ library_names_spec='$libname.dll.a' -+ # DLL is installed to $(libdir)/../bin by postinstall_cmds -+ postinstall_cmds='base_file=`basename \${file}`~ -+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ -+ dldir=$destdir/`dirname \$dlpath`~ -+ test -d \$dldir || mkdir -p \$dldir~ -+ $install_prog $dir/$dlname \$dldir/$dlname~ -+ chmod a+x \$dldir/$dlname~ -+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then -+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; -+ fi' -+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ -+ dlpath=$dir/\$dldll~ -+ $RM \$dlpath' -+ shlibpath_overrides_runpath=yes -+ -+ case $host_os in -+ cygwin*) -+ # Cygwin DLLs use 'cyg' prefix rather than 'lib' -+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac + ;; -+ mingw* | cegcc*) -+ # MinGW DLLs use traditional 'lib' prefix -+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` -+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then -+ # It is most probably a Windows format PATH printed by -+ # mingw gcc, but we are running on Cygwin. Gcc prints its search -+ # path with ; separators, and with drive letters. We can handle the -+ # drive letters (cygwin fileutils understands them), so leave them, -+ # especially as we might pass files found there to a mingw objdump, -+ # which wouldn't understand a cygwinified path. Ahh. -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` -+ else -+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; + +-# A C compiler. +-LTCC=$lt_LTCC ++ mingw* | cygwin* | pw32* | os2* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; + +-# A language-specific compiler. +-CC=$lt_compiler ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic='-fno-common' ++ ;; + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC ++ hpux*) ++ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit ++ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag ++ # sets the default TLS model and affects inlining. ++ case $host_cpu in ++ hppa*64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ ;; + +-# An ERE matcher. +-EGREP=$lt_EGREP ++ interix[3-9]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; + +-# The linker used to build libraries. +-LD=$lt_LD ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared=no ++ enable_shared=no ++ ;; + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' ++ ;; + +-# A BSD-compatible nm program. +-NM=$lt_NM ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic=-Kconform_pic + fi + ;; -+ pw32*) -+ # pw32 DLLs use 'pw' prefix rather than 'lib' -+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + +-# A symbol stripping program +-STRIP=$lt_STRIP ++ *) ++ lt_prog_compiler_pic='-fPIC' + ;; + esac -+ ;; -+ -+ *) -+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' -+ ;; -+ esac -+ dynamic_linker='Win32 ld.exe' -+ # FIXME: first we should search . and the directory the executable is in -+ shlibpath_var=PATH -+ ;; -+ -+darwin* | rhapsody*) -+ dynamic_linker="$host_os dyld" -+ version_type=darwin -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' -+ soname_spec='${libname}${release}${major}$shared_ext' -+ shlibpath_overrides_runpath=yes -+ shlibpath_var=DYLD_LIBRARY_PATH -+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' -+m4_if([$1], [],[ -+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) -+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' -+ ;; -+ -+dgux*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ ;; -+ -+freebsd1*) -+ dynamic_linker=no -+ ;; -+ -+freebsd* | dragonfly*) -+ # DragonFly does not have aout. When/if they implement a new -+ # versioning mechanism, adjust this. -+ if test -x /usr/bin/objformat; then -+ objformat=`/usr/bin/objformat` + else ++ # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in -+ freebsd[[123]]*) objformat=aout ;; -+ *) objformat=elf ;; -+ esac -+ fi -+ version_type=freebsd-$objformat -+ case $version_type in -+ freebsd-elf*) -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -+ need_version=no -+ need_lib_prefix=no ++ aix*) ++ lt_prog_compiler_wl='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ else ++ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD ++ mingw* | cygwin* | pw32* | os2* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static='${wl}-a ${wl}archive' ++ ;; + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static='-non_shared' ++ ;; + +-# Used on cygwin: assembler. +-AS="$AS" ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ # old Intel for x86_64 which still supported -KPIC. ++ ecc*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-static' ++ ;; ++ # icc used to be incompatible with GCC. ++ # ICC 10 doesn't accept -KPIC any more. ++ icc* | ifort*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-fPIC' ++ lt_prog_compiler_static='-static' ++ ;; ++ # Lahey Fortran 8.1. ++ lf95*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='--shared' ++ lt_prog_compiler_static='--static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-fpic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ xl*) ++ # IBM XL C 8.0/Fortran 10.1 on PPC ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-qpic' ++ lt_prog_compiler_static='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='' ++ ;; ++ esac ++ ;; ++ esac ++ ;; + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir ++ newsos6) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' ++ ;; + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; + +-# Object file suffix (normally "o"). +-objext="$ac_objext" ++ rdos*) ++ lt_prog_compiler_static='-non_shared' ++ ;; + +-# Old archive suffix (normally "a"). +-libext="$libext" ++ solaris*) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl='-Wl,';; ++ esac ++ ;; + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' ++ sunos4*) ++ lt_prog_compiler_wl='-Qoption ld ' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + +-# Executable file suffix (normally ""). +-exeext="$exeext" ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' + ;; -+ freebsd-*) -+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' -+ need_version=yes + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic +-pic_mode=$pic_mode ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic='-Kconform_pic' ++ lt_prog_compiler_static='-Bstatic' ++ fi + ;; -+ esac -+ shlibpath_var=LD_LIBRARY_PATH -+ case $host_os in -+ freebsd2*) -+ shlibpath_overrides_runpath=yes -+ ;; -+ freebsd3.[[01]]* | freebsdelf3.[[01]]*) -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ ;; -+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ -+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o ++ unicos*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_can_build_shared=no ++ ;; + +-# Must we lock files when doing compilation ? +-need_locks=$lt_need_locks ++ uts4*) ++ lt_prog_compiler_pic='-pic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix ++ *) ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ esac ++ fi + +-# Do we need a version for libraries? +-need_version=$need_version ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic= + ;; -+ *) # from 4.6 on, and DragonFly -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes ++ *) ++ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; -+ esac -+ ;; -+ -+gnu*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ hardcode_into_libs=yes -+ ;; -+ -+hpux9* | hpux10* | hpux11*) -+ # Give a soname corresponding to the major version so that dld.sl refuses to -+ # link against other versions. -+ version_type=sunos -+ need_lib_prefix=no -+ need_version=no -+ case $host_cpu in -+ ia64*) -+ shrext_cmds='.so' -+ hardcode_into_libs=yes -+ dynamic_linker="$host_os dld.so" -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ if test "X$HPUX_IA64_MODE" = X32; then -+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" -+ else -+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++esac ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 ++$as_echo "$lt_prog_compiler_pic" >&6; } + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } ++if test "${lt_cv_prog_compiler_pic_works+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_pic_works=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:8732: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:8736: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_pic_works=yes ++ fi ++ fi ++ $RM conftest* + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 ++$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec ++if test x"$lt_cv_prog_compiler_pic_works" = xyes; then ++ case $lt_prog_compiler_pic in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; ++ esac ++else ++ lt_prog_compiler_pic= ++ lt_prog_compiler_can_build_shared=no ++fi + +-# Library versioning type. +-version_type=$version_type ++fi + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } ++if test "${lt_cv_prog_compiler_static_works+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_static_works=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ else ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds +-archive_expsym_cmds=$lt_archive_expsym_cmds +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 ++$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds +-module_expsym_cmds=$lt_module_expsym_cmds ++if test x"$lt_cv_prog_compiler_static_works" = xyes; then ++ : ++else ++ lt_prog_compiler_static= ++fi + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects + +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps + +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps + +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 ++$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:8837: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:8841: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 ++$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 ++$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:8892: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:8896: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 ++$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 ++$as_echo_n "checking if we can lock with hard links... " >&6; } ++ hard_links=yes ++ $RM conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 ++$as_echo "$hard_links" >&6; } ++ if test "$hard_links" = no; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var + +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ runpath_var= ++ allow_undefined_flag= ++ always_export_symbols=no ++ archive_cmds= ++ archive_expsym_cmds= ++ compiler_needs_object=no ++ enable_shared_with_static_runtimes=no ++ export_dynamic_flag_spec= ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ hardcode_automatic=no ++ hardcode_direct=no ++ hardcode_direct_absolute=no ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld= ++ hardcode_libdir_separator= ++ hardcode_minus_L=no ++ hardcode_shlibpath_var=unsupported ++ inherit_rpath=no ++ link_all_deplibs=unknown ++ module_cmds= ++ module_expsym_cmds= ++ old_archive_from_new_cmds= ++ old_archive_from_expsyms_cmds= ++ thread_safe_flag_spec= ++ whole_archive_flag_spec= ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++ extract_expsyms_cmds= + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path" ++ case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no + fi -+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec -+ ;; -+ hppa*64*) -+ shrext_cmds='.sl' -+ hardcode_into_libs=yes -+ dynamic_linker="$host_os dld.sl" -+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH -+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" -+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; -+ *) -+ shrext_cmds='.sl' -+ dynamic_linker="$host_os dld.sl" -+ shlibpath_var=SHLIB_PATH -+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes + ;; -+ esac -+ # HP-UX runs *really* slowly unless shared libraries are mode 555. -+ postinstall_cmds='chmod 555 $lib' -+ ;; -+ -+interix[[3-9]]*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; -+ -+irix5* | irix6* | nonstopux*) -+ case $host_os in -+ nonstopux*) version_type=nonstopux ;; -+ *) -+ if test "$lt_cv_prog_gnu_ld" = yes; then -+ version_type=linux -+ else -+ version_type=irix -+ fi ;; -+ esac -+ need_lib_prefix=no -+ need_version=no -+ soname_spec='${libname}${release}${shared_ext}$major' -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' -+ case $host_os in -+ irix5* | nonstopux*) -+ libsuff= shlibsuff= ++ openbsd*) ++ with_gnu_ld=no + ;; -+ *) -+ case $LD in # libtool.m4 will add one of these switches to LD -+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") -+ libsuff= shlibsuff= libmagic=32-bit;; -+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") -+ libsuff=32 shlibsuff=N32 libmagic=N32;; -+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") -+ libsuff=64 shlibsuff=64 libmagic=64-bit;; -+ *) libsuff= shlibsuff= libmagic=never-match;; -+ esac ++ linux* | k*bsd*-gnu) ++ link_all_deplibs=no + ;; + esac -+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH -+ shlibpath_overrides_runpath=no -+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" -+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" -+ hardcode_into_libs=yes -+ ;; -+ -+# No shared lib support for Linux oldld, aout, or coff. -+linux*oldld* | linux*aout* | linux*coff*) -+ dynamic_linker=no -+ ;; -+ -+# This must be Linux ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ # Some binutils ld are patched to set DT_RUNPATH -+ save_LDFLAGS=$LDFLAGS -+ save_libdir=$libdir -+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ -+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" -+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], -+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], -+ [shlibpath_overrides_runpath=yes])]) -+ LDFLAGS=$save_LDFLAGS -+ libdir=$save_libdir -+ -+ # This implies no fast_install, which is unacceptable. -+ # Some rework will be needed to allow for fast_install -+ # before this can be enabled. -+ hardcode_into_libs=yes -+ -+ # Append ld.so.conf contents to the search path -+ if test -f /etc/ld.so.conf; then -+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` -+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" -+ fi -+ -+ # We used to test for /lib/ld.so.1 and disable shared libraries on -+ # powerpc, because MkLinux only supported shared libraries with the -+ # GNU dynamic linker. Since this was broken with cross compilers, -+ # most powerpc-linux boxes support dynamic linking these days and -+ # people can always --disable-shared, the test was removed, and we -+ # assume the GNU/Linux dynamic linker is in use. -+ dynamic_linker='GNU/Linux ld.so' -+ ;; -+ -+netbsdelf*-gnu) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ dynamic_linker='NetBSD ld.elf_so' -+ ;; -+ -+netbsd*) -+ version_type=sunos -+ need_lib_prefix=no -+ need_version=no -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -+ dynamic_linker='NetBSD (a.out) ld.so' -+ else -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ dynamic_linker='NetBSD ld.elf_so' -+ fi -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ ;; -+ -+newsos6) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ ;; -+ -+*nto* | *qnx*) -+ version_type=qnx -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ dynamic_linker='ldqnx.so' -+ ;; -+ -+openbsd*) -+ version_type=sunos -+ sys_lib_dlsearch_path_spec="/usr/lib" -+ need_lib_prefix=no -+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. -+ case $host_os in -+ openbsd3.3 | openbsd3.3.*) need_version=yes ;; -+ *) need_version=no ;; -+ esac -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols ++ ld_shlibs=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ export_dynamic_flag_spec='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>&1` in ++ *GNU\ gold*) supports_anon_versioning=yes ;; ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ # See if GNU ld supports shared libraries. + case $host_os in -+ openbsd2.[[89]] | openbsd2.[[89]].*) -+ shlibpath_overrides_runpath=no ++ aix[3-9]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms ++_LT_EOF ++ fi ++ ;; + +-# ### END LIBTOOL CONFIG ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; + +-__EOF__ ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; + ++ cygwin* | mingw* | pw32* | cegcc*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec='-L$libdir' ++ allow_undefined_flag=unsupported ++ always_export_symbols=no ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + +- case $host_os in +- aix3*) +- cat <<\EOF >> "$cfgfile" ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; + +-# AIX sometimes has problems with the GCC collect2 program. For some +-# reason, if we set the COLLECT_NAMES environment variable, the problems +-# vanish in a puff of smoke. +-if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +-fi +-EOF +- ;; +- esac ++ interix[3-9]*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; + +- # We use sed instead of cat because bash on DJGPP gets confused if +- # if finds mixed CR/LF and LF-only lines. Since sed operates in +- # text mode, it properly converts lines to CR/LF. This bash problem +- # is reportedly fixed, but why not run on old versions too? +- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) ++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) ++ tmp_diet=no ++ if test "$host_os" = linux-dietlibc; then ++ case $cc_basename in ++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) ++ esac ++ fi ++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ ++ && test "$tmp_diet" = no ++ then ++ tmp_addflag= ++ tmp_sharedflag='-shared' ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ lf95*) # Lahey Fortran 8.1 ++ whole_archive_flag_spec= ++ tmp_sharedflag='--shared' ;; ++ xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) ++ tmp_sharedflag='-qmkshrobj' ++ tmp_addflag= ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ compiler_needs_object=yes ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ esac ++ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + +- mv -f "$cfgfile" "$ofile" || \ +- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") +- chmod +x "$ofile" ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi + +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi ++ case $cc_basename in ++ xlf*) ++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself ++ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld='-rpath $libdir' ++ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ esac ++ else ++ ld_shlibs=no ++ fi ++ ;; + ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ solaris*) ++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 + +-CC="$lt_save_CC" ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + ++_LT_EOF ++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; + +-# Check whether --with-tags or --without-tags was given. +-if test "${with_tags+set}" = set; then +- withval="$with_tags" +- tagnames="$withval" +-fi; ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 + +-if test -f "$ltmain" && test -n "$tagnames"; then +- if test ! -f "${ofile}"; then +- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 +-echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} +- fi ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + +- if test -z "$LTCC"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCC='`" +- if test -z "$LTCC"; then +- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 +-echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} +- else +- { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 +-echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} +- fi +- fi ++_LT_EOF + ;; -+ *) -+ shlibpath_overrides_runpath=yes ++ *) ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi + ;; + esac ++ ;; + +- # Extract list of available tagged configurations in $ofile. +- # Note that this assumes the entire list is on one line. +- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=$.*$$/\1/' -e 's/\"//g'` ++ sunos4*) ++ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; + +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for tagname in $tagnames; do +- IFS="$lt_save_ifs" +- # Check whether tagname contains only valid characters +- case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in +- "") ;; +- *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 +-echo "$as_me: error: invalid tag name: $tagname" >&2;} +- { (exit 1); exit 1; }; } +- ;; ++ *) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; + esac + +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null +- then +- { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 +-echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} +- { (exit 1); exit 1; }; } ++ if test "$ld_shlibs" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec= ++ export_dynamic_flag_spec= ++ whole_archive_flag_spec= + fi + else -+ shlibpath_overrides_runpath=yes -+ fi -+ ;; -+ -+os2*) -+ libname_spec='$name' -+ shrext_cmds=".dll" -+ need_lib_prefix=no -+ library_names_spec='$libname${shared_ext} $libname.a' -+ dynamic_linker='OS/2 ld.exe' -+ shlibpath_var=LIBPATH -+ ;; -+ -+osf3* | osf4* | osf5*) -+ version_type=osf -+ need_lib_prefix=no -+ need_version=no -+ soname_spec='${libname}${release}${shared_ext}$major' -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" -+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" -+ ;; -+ -+rdos*) -+ dynamic_linker=no -+ ;; -+ -+solaris*) -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ # ldd complains unless libraries are executable -+ postinstall_cmds='chmod +x $lib' -+ ;; -+ -+sunos4*) -+ version_type=sunos -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' -+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ if test "$with_gnu_ld" = yes; then -+ need_lib_prefix=no -+ fi -+ need_version=yes -+ ;; -+ -+sysv4 | sysv4.3*) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ case $host_vendor in -+ sni) -+ shlibpath_overrides_runpath=no -+ need_lib_prefix=no -+ runpath_var=LD_RUN_PATH ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct=unsupported ++ fi + ;; -+ siemens) -+ need_lib_prefix=no + +- # Update the list of available tags. +- if test -n "$tagname"; then +- echo appending configuration tag \"$tagname\" to $ofile +- +- case $tagname in +- CXX) +- if test -n "$CXX" && test "X$CXX" != "Xno"; then +- ac_ext=cc +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +- +- +- ++ aix[4-9]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no + +-archive_cmds_need_lc_CXX=no +-allow_undefined_flag_CXX= +-always_export_symbols_CXX=no +-archive_expsym_cmds_CXX= +-export_dynamic_flag_spec_CXX= +-hardcode_direct_CXX=no +-hardcode_libdir_flag_spec_CXX= +-hardcode_libdir_flag_spec_ld_CXX= +-hardcode_libdir_separator_CXX= +-hardcode_minus_L_CXX=no +-hardcode_automatic_CXX=no +-module_cmds_CXX= +-module_expsym_cmds_CXX= +-link_all_deplibs_CXX=unknown +-old_archive_cmds_CXX=$old_archive_cmds +-no_undefined_flag_CXX= +-whole_archive_flag_spec_CXX= +-enable_shared_with_static_runtimes_CXX=no +- +-# Dependencies to place before and after the object being linked: +-predep_objects_CXX= +-postdep_objects_CXX= +-predeps_CXX= +-postdeps_CXX= +-compiler_lib_search_path_CXX= +- +-# Source file extension for C++ test sources. +-ac_ext=cc +- +-# Object file extension for compiled C++ test sources. +-objext=o +-objext_CXX=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;\n" +- +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(int, char *) { return(0); }\n' +- +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +- +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} +- +-# Allow CC to be a program name with arguments. +-compiler=$CC +- +- +-# Allow CC to be a program name with arguments. +-lt_save_CC=$CC +-lt_save_LD=$LD +-lt_save_GCC=$GCC +-GCC=$GXX +-lt_save_with_gnu_ld=$with_gnu_ld +-lt_save_path_LD=$lt_cv_path_LD +-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then +- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +-else +- unset lt_cv_prog_gnu_ld +-fi +-if test -n "${lt_cv_path_LDCXX+set}"; then +- lt_cv_path_LD=$lt_cv_path_LDCXX +-else +- unset lt_cv_path_LD +-fi +-test -z "${LDCXX+set}" || LD=$LDCXX +-CC=${CXX-"c++"} +-compiler=$CC +-compiler_CXX=$CC +-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` +- +-# We don't want -fno-exception wen compiling C++ code, so set the +-# no_builtin_flag separately +-if test "$GXX" = yes; then +- lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' +-else +- lt_prog_compiler_no_builtin_flag_CXX= +-fi +- +-if test "$GXX" = yes; then +- # Set up default GNU C++ configuration +- +- +-# Check whether --with-gnu-ld or --without-gnu-ld was given. +-if test "${with_gnu_ld+set}" = set; then +- withval="$with_gnu_ld" +- test "$withval" = no || with_gnu_ld=yes +-else +- with_gnu_ld=no +-fi; +-ac_prog=ld +-if test "$GCC" = yes; then +- # Check if gcc -print-prog-name=ld gives a path. +- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 +- case $host in +- *-*-mingw*) +- # gcc leaves a trailing carriage return which upsets mingw +- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; +- *) +- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; +- esac +- case $ac_prog in +- # Accept absolute paths. +- [\\/]* | ?:[\\/]*) +- re_direlt='/[^/][^/]*/\.\./' +- # Canonicalize the pathname of ld +- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` +- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` +- done +- test -z "$LD" && LD="$ac_prog" +- ;; +- "") +- # If it fails, then pretend we aren't using GCC. +- ac_prog=ld +- ;; +- *) +- # If it is relative, then search for the first ld in PATH. +- with_gnu_ld=unknown +- ;; +- esac +-elif test "$with_gnu_ld" = yes; then +- echo "$as_me:$LINENO: checking for GNU ld" >&5 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 +-else +- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 +-fi +-if test "${lt_cv_path_LD+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -z "$LD"; then +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then +- lt_cv_path_LD="$ac_dir/$ac_prog" +- # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some GNU ld's only accept -v. +- # Break only if it was the GNU/non-GNU ld that we prefer. +- case `"$lt_cv_path_LD" -v 2>&1 &5 +-echo "${ECHO_T}$LD" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} +- { (exit 1); exit 1; }; } +-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 +-if test "${lt_cv_prog_gnu_ld+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- # I'd rather use --version here, but apparently some GNU ld's only accept -v. +-case `$LD -v 2>&1 &5 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 +-with_gnu_ld=$lt_cv_prog_gnu_ld +- +- +- +- # Check if GNU C++ uses GNU ld as the underlying linker, since the +- # archiving commands below assume that GNU ld is being used. +- if test "$with_gnu_ld" = yes; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' +- +- # If archive_cmds runs LD, not CC, wlarc should be empty +- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to +- # investigate it a little bit more. (MM) +- wlarc='${wl}' +- +- # ancient GNU ld didn't support --whole-archive et. al. +- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ +- grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec_CXX= +- fi +- else +- with_gnu_ld=no +- wlarc= +- +- # A generic and very simple default shared library creation +- # command for GNU C++ for the case where it uses the native +- # linker, instead of GNU ld. If possible, this setting should +- # overridden to take advantage of the native linker features on +- # the platform it is being used on. +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' +- fi +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +- +-else +- GXX=no +- with_gnu_ld=no +- wlarc= +-fi +- +-# PORTME: fill in a description of your system's C++ link characteristics +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 +-ld_shlibs_CXX=yes +-case $host_os in +- aix3*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- aix_use_runtimelinking=no +- +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) +- for ld_flag in $LDFLAGS; do +- case $ld_flag in +- *-brtl*) ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break +- ;; +- esac +- done +- esac ++ fi ++ done ++ ;; ++ esac + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +- +- archive_cmds_CXX='' +- hardcode_direct_CXX=yes +- hardcode_libdir_separator_CXX=':' +- link_all_deplibs_CXX=yes ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + +- if test "$GXX" = yes; then +- case $host_os in aix4.012|aix4.012.*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then ++ archive_cmds='' ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ file_list_spec='${wl}-f,' ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then + # We have reworked collect2 +- hardcode_direct_CXX=yes +- else ++ : ++ else + # We have old collect2 +- hardcode_direct_CXX=unsupported ++ hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking +- hardcode_minus_L_CXX=yes +- hardcode_libdir_flag_spec_CXX='-L$libdir' +- hardcode_libdir_separator_CXX= ++ hardcode_minus_L=yes ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_libdir_separator= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' + fi +- esac +- shared_flag='-shared' +- else +- # not using gcc +- if test "$host_cpu" = ia64; then ++ link_all_deplibs=no ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' ++ shared_flag='-G' + else +- shared_flag='${wl}-bM:SRE' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi + fi + fi +- fi + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols_CXX=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag_CXX='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ export_dynamic_flag_spec='${wl}-bexpall' ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag='-berok' ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9925,58 +9406,36 @@ main () + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++if ac_fn_c_try_link "$LINENO"; then : + +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'` ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$.*$$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'`; fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" +- +- archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag_CXX="-z nodefs" +- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag="-z nodefs" ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + + int +@@ -9987,9085 +9446,5350 @@ main () + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++if ac_fn_c_try_link "$LINENO"; then : + +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'` ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$.*$$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'`; fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag_CXX=' ${wl}-bernotok' +- allow_undefined_flag_CXX=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- always_export_symbols_CXX=yes +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_CXX=' ' +- archive_cmds_need_lc_CXX=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag=' ${wl}-bernotok' ++ allow_undefined_flag=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec='$convenience' ++ archive_cmds_need_lc=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi + fi +- fi +- ;; +- chorus*) +- case $cc_basename in +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; + ;; -+ motorola) -+ need_lib_prefix=no -+ need_version=no -+ shlibpath_overrides_runpath=no -+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec_CXX='-L$libdir' +- allow_undefined_flag_CXX=unsupported +- always_export_symbols_CXX=no +- enable_shared_with_static_runtimes_CXX=yes +- +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- else +- ld_shlibs_CXX=no +- fi +- ;; ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac + ;; -+ esac -+ ;; + +- darwin* | rhapsody*) +- if test "$GXX" = yes; then +- archive_cmds_need_lc_CXX=no +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag_CXX='-undefined suppress' ++ bsdi[45]*) ++ export_dynamic_flag_spec=-rdynamic + ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag_CXX='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag_CXX='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- allow_undefined_flag_CXX='-undefined dynamic_lookup' +- ;; +- esac +- fi + -+sysv4*MP*) -+ if test -d /usr/nec ;then -+ version_type=linux -+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' -+ soname_spec='$libname${shared_ext}.$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ fi -+ ;; ++ cygwin* | mingw* | pw32* | cegcc*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes=yes + ;; +- esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- archive_cmds_CXX='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- module_cmds_CXX='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- hardcode_direct_CXX=no +- hardcode_automatic_CXX=yes +- hardcode_shlibpath_var_CXX=unsupported +- whole_archive_flag_spec_CXX='-all_load $convenience' +- link_all_deplibs_CXX=yes ++ darwin* | rhapsody*) + -+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) -+ version_type=freebsd-elf -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=yes -+ hardcode_into_libs=yes -+ if test "$with_gnu_ld" = yes; then -+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' -+ else -+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' -+ case $host_os in -+ sco3.2v5*) -+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" -+ ;; -+ esac -+ fi -+ sys_lib_dlsearch_path_spec='/usr/lib' -+ ;; + -+tpf*) -+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. -+ version_type=linux -+ need_lib_prefix=no -+ need_version=no -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ shlibpath_var=LD_LIBRARY_PATH -+ shlibpath_overrides_runpath=no -+ hardcode_into_libs=yes -+ ;; ++ archive_cmds_need_lc=no ++ hardcode_direct=no ++ hardcode_automatic=yes ++ hardcode_shlibpath_var=unsupported ++ whole_archive_flag_spec='' ++ link_all_deplibs=yes ++ allow_undefined_flag="$_lt_dar_allow_undefined" ++ case $cc_basename in ++ ifort*) _lt_dar_can_shared=yes ;; ++ *) _lt_dar_can_shared=$GCC ;; ++ esac ++ if test "$_lt_dar_can_shared" = "yes"; then ++ output_verbose_link_cmd=echo ++ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + -+uts4*) -+ version_type=linux -+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' -+ soname_spec='${libname}${release}${shared_ext}$major' -+ shlibpath_var=LD_LIBRARY_PATH -+ ;; + else +- ld_shlibs_CXX=no ++ ld_shlibs=no + fi +- ;; + +- dgux*) +- case $cc_basename in +- ec++) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- ghcx) +- # Green Hills C++ Compiler +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- freebsd12*) +- # C++ shared libraries reported to be fairly broken before switch to ELF +- ld_shlibs_CXX=no +- ;; +- freebsd-elf*) +- archive_cmds_need_lc_CXX=no +- ;; +- freebsd* | kfreebsd*-gnu) +- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF +- # conventions +- ld_shlibs_CXX=yes +- ;; +- gnu*) +- ;; +- hpux9*) +- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- export_dynamic_flag_spec_CXX='${wl}-E' +- hardcode_direct_CXX=yes +- hardcode_minus_L_CXX=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- +- case $cc_basename in +- CC) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no + ;; +- aCC) +- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + -+*) -+ dynamic_linker=no -+ ;; -+esac -+AC_MSG_RESULT([$dynamic_linker]) -+test "$dynamic_linker" = no && can_build_shared=no ++ dgux*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no + ;; +- *) +- if test "$GXX" = yes; then +- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- fi + -+variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -+if test "$GCC" = yes; then -+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -+fi ++ freebsd1*) ++ ld_shlibs=no + ;; +- esac +- ;; +- hpux10*|hpux11*) +- if test $with_gnu_ld = no; then +- case "$host_cpu" in +- hppa*64*) +- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' +- hardcode_libdir_flag_spec_ld_CXX='+b $libdir' +- hardcode_libdir_separator_CXX=: +- ;; +- ia64*) +- hardcode_libdir_flag_spec_CXX='-L$libdir' +- ;; +- *) +- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- export_dynamic_flag_spec_CXX='${wl}-E' +- ;; +- esac +- fi +- case "$host_cpu" in +- hppa*64*) +- hardcode_direct_CXX=no +- hardcode_shlibpath_var_CXX=no + -+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then -+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -+fi -+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then -+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -+fi ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no + ;; +- ia64*) +- hardcode_direct_CXX=no +- hardcode_shlibpath_var_CXX=no +- hardcode_minus_L_CXX=yes # Not in the search PATH, +- # but as the default +- # location of the library. + -+_LT_DECL([], [variables_saved_for_relink], [1], -+ [Variables whose values should be saved in libtool wrapper scripts and -+ restored at link time]) -+_LT_DECL([], [need_lib_prefix], [0], -+ [Do we need the "lib" prefix for modules?]) -+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) -+_LT_DECL([], [version_type], [0], [Library versioning type]) -+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) -+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) -+_LT_DECL([], [shlibpath_overrides_runpath], [0], -+ [Is shlibpath searched before the hard-coded library search path?]) -+_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) -+_LT_DECL([], [library_names_spec], [1], -+ [[List of archive names. First name is the real one, the rest are links. -+ The last name is the one that the linker finds with -lNAME]]) -+_LT_DECL([], [soname_spec], [1], -+ [[The coded name of the library, if different from the real name]]) -+_LT_DECL([], [postinstall_cmds], [2], -+ [Command to use after installation of a shared archive]) -+_LT_DECL([], [postuninstall_cmds], [2], -+ [Command to use after uninstallation of a shared archive]) -+_LT_DECL([], [finish_cmds], [2], -+ [Commands used to finish a libtool library installation in a directory]) -+_LT_DECL([], [finish_eval], [1], -+ [[As "finish_cmds", except a single script fragment to be evaled but -+ not shown]]) -+_LT_DECL([], [hardcode_into_libs], [0], -+ [Whether we should hardcode library paths into libraries]) -+_LT_DECL([], [sys_lib_search_path_spec], [2], -+ [Compile-time system search path for libraries]) -+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], -+ [Run-time system search path for libraries]) -+])# _LT_SYS_DYNAMIC_LINKER ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no + ;; +- *) +- hardcode_direct_CXX=yes +- hardcode_minus_L_CXX=yes # Not in the search PATH, +- # but as the default +- # location of the library. + ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no + ;; +- esac + +- case $cc_basename in +- CC) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- aCC) +- case "$host_cpu" in +- hppa*64*|ia64*) +- archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes + -+# _LT_PATH_TOOL_PREFIX(TOOL) -+# -------------------------- -+# find a file program which can recognize shared library -+AC_DEFUN([_LT_PATH_TOOL_PREFIX], -+[m4_require([_LT_DECL_EGREP])dnl -+AC_MSG_CHECKING([for $1]) -+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -+[case $MAGIC_CMD in -+[[\\/*] | ?:[\\/]*]) -+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. -+ ;; -+*) -+ lt_save_MAGIC_CMD="$MAGIC_CMD" -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+dnl $ac_dummy forces splitting on constant user-supplied paths. -+dnl POSIX.2 word splitting is done only on the output of word expansions, -+dnl not every word. This closes a longstanding sh security hole. -+ ac_dummy="m4_if([$2], , $PATH, [$2])" -+ for ac_dir in $ac_dummy; do -+ IFS="$lt_save_ifs" -+ test -z "$ac_dir" && ac_dir=. -+ if test -f $ac_dir/$1; then -+ lt_cv_path_MAGIC_CMD="$ac_dir/$1" -+ if test -n "$file_magic_test_file"; then -+ case $deplibs_check_method in -+ "file_magic "*) -+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"` -+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | -+ $EGREP "$file_magic_regex" > /dev/null; then -+ : -+ else -+ cat <<_LT_EOF 1>&2 ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ;; + -+*** Warning: the command libtool uses to detect shared libraries, -+*** $file_magic_cmd, produces output that libtool cannot recognize. -+*** The result is that libtool may fail to recognize shared libraries -+*** as such. This will affect the creation of libtool libraries that -+*** depend on shared libraries, but programs linked with such libtool -+*** libraries will work regardless of this problem. Nevertheless, you -+*** may want to report the problem to your system manager and/or to -+*** bug-libtool@gnu.org ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_flag_spec_ld='+b $libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ fi ++ ;; + -+_LT_EOF -+ fi ;; ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes; then +- if test $with_gnu_ld = no; then +- case "$host_cpu" in +- ia64*|hppa*64*) +- archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' +- ;; +- *) +- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- esac +- fi +- else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- fi +- ;; +- esac +- ;; +- irix5* | irix6*) +- case $cc_basename in +- CC) +- # SGI C++ +- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' +- +- # Archives containing C++ object files must be created using +- # "CC -ar", where "CC" is the IRIX C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' +- ;; +- *) +- if test "$GXX" = yes; then +- if test "$with_gnu_ld" = no; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' +- else +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' +- fi +- fi +- link_all_deplibs_CXX=yes +- ;; +- esac +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- ;; +- linux*) +- case $cc_basename in +- KCC) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- +- hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' +- +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' +- ;; +- icpc) +- # Intel C++ +- with_gnu_ld=yes +- archive_cmds_need_lc_CXX=no +- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' +- whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' +- ;; +- cxx) +- # Compaq C++ +- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: + +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec_CXX='-rpath $libdir' +- hardcode_libdir_separator_CXX=: ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ ;; ++ *) ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- esac +- ;; +- lynxos*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- m88k*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- mvs*) +- case $cc_basename in +- cxx) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' +- wlarc= +- hardcode_libdir_flag_spec_CXX='-R$libdir' +- hardcode_direct_CXX=yes +- hardcode_shlibpath_var_CXX=no +- fi +- # Workaround some broken pre-1.5 toolchains +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' +- ;; +- osf3*) +- case $cc_basename in +- KCC) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ ;; + esac + fi -+ break -+ fi -+ done -+ IFS="$lt_save_ifs" -+ MAGIC_CMD="$lt_save_MAGIC_CMD" -+ ;; -+esac]) -+MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -+if test -n "$MAGIC_CMD"; then -+ AC_MSG_RESULT($MAGIC_CMD) -+else -+ AC_MSG_RESULT(no) -+fi -+_LT_DECL([], [MAGIC_CMD], [0], -+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl -+])# _LT_PATH_TOOL_PREFIX -+ -+# Old name: -+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) -+ -+ -+# _LT_PATH_MAGIC -+# -------------- -+# find a file program which can recognize a shared library -+m4_defun([_LT_PATH_MAGIC], -+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -+if test -z "$lt_cv_path_MAGIC_CMD"; then -+ if test -n "$ac_tool_prefix"; then -+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) -+ else -+ MAGIC_CMD=: -+ fi -+fi -+])# _LT_PATH_MAGIC -+ -+ -+# LT_PATH_LD -+# ---------- -+# find the pathname to the GNU or non-GNU linker -+AC_DEFUN([LT_PATH_LD], -+[AC_REQUIRE([AC_PROG_CC])dnl -+AC_REQUIRE([AC_CANONICAL_HOST])dnl -+AC_REQUIRE([AC_CANONICAL_BUILD])dnl -+m4_require([_LT_DECL_SED])dnl -+m4_require([_LT_DECL_EGREP])dnl -+ -+AC_ARG_WITH([gnu-ld], -+ [AS_HELP_STRING([--with-gnu-ld], -+ [assume the C compiler uses GNU ld @<:@default=no@:>@])], -+ [test "$withval" = no || with_gnu_ld=yes], -+ [with_gnu_ld=no])dnl -+ -+ac_prog=ld -+if test "$GCC" = yes; then -+ # Check if gcc -print-prog-name=ld gives a path. -+ AC_MSG_CHECKING([for ld used by $CC]) -+ case $host in -+ *-*-mingw*) -+ # gcc leaves a trailing carriage return which upsets mingw -+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; -+ *) -+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; -+ esac -+ case $ac_prog in -+ # Accept absolute paths. -+ [[\\/]]* | ?:[[\\/]]*) -+ re_direlt='/[[^/]][[^/]]*/\.\./' -+ # Canonicalize the pathname of ld -+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` -+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do -+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` -+ done -+ test -z "$LD" && LD="$ac_prog" + ;; -+ "") -+ # If it fails, then pretend we aren't using GCC. -+ ac_prog=ld -+ ;; -+ *) -+ # If it is relative, then search for the first ld in PATH. -+ with_gnu_ld=unknown -+ ;; -+ esac -+elif test "$with_gnu_ld" = yes; then -+ AC_MSG_CHECKING([for GNU ld]) -+else -+ AC_MSG_CHECKING([for non-GNU ld]) -+fi -+AC_CACHE_VAL(lt_cv_path_LD, -+[if test -z "$LD"; then -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+ for ac_dir in $PATH; do -+ IFS="$lt_save_ifs" -+ test -z "$ac_dir" && ac_dir=. -+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then -+ lt_cv_path_LD="$ac_dir/$ac_prog" -+ # Check to see if the program is GNU ld. I'd rather use --version, -+ # but apparently some variants of GNU ld only accept -v. -+ # Break only if it was the GNU/non-GNU ld that we prefer. -+ case `"$lt_cv_path_LD" -v 2>&1 conftest.$ac_ext ++/* end confdefs.h. */ ++int foo(void) {} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ inherit_rpath=yes ++ link_all_deplibs=yes ++ ;; + +- ;; +- RCC) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- cxx) +- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; + +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: ++ newsos6) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_shlibpath_var=no ++ ;; + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ *nto* | *qnx*) ++ ;; + ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ hardcode_direct_absolute=yes ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' + else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ ;; ++ *) ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ ;; ++ esac + fi +- ;; +- esac +- ;; +- osf4* | osf5*) +- case $cc_basename in +- KCC) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; + +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- hardcode_libdir_separator_CXX=: ++ os2*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ allow_undefined_flag=unsupported ++ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; + +- # Archives containing C++ object files must be created using +- # the KAI C++ compiler. +- old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' +- ;; +- RCC) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- cxx) +- allow_undefined_flag_CXX=' -expect_unresolved \*' +- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' +- archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ +- echo "-hidden">> $lib.exp~ +- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ +- $rm $lib.exp' +- +- hardcode_libdir_flag_spec_CXX='-rpath $libdir' +- hardcode_libdir_separator_CXX=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ;; + +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ ++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec='-rpath $libdir' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_separator=: ++ ;; + ++ solaris*) ++ no_undefined_flag=' -z defs' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ else ++ case `$CC -V 2>&1` in ++ *"Compilers 5.0"*) ++ wlarc='' ++ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ++ ;; ++ *) ++ wlarc='${wl}' ++ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ ;; ++ esac ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_shlibpath_var=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; + *) -+ test "$with_gnu_ld" != yes && break -+ ;; ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no ++ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; +- esac +- ;; +- psos*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- sco*) +- archive_cmds_need_lc_CXX=no +- case $cc_basename in +- CC) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- sunos4*) +- case $cc_basename in +- CC) +- # Sun C++ 4.x +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- lcc) +- # Lucid +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no + esac -+ fi -+ done -+ IFS="$lt_save_ifs" -+else -+ lt_cv_path_LD="$LD" # Let the user override the test with a path. -+fi]) -+LD="$lt_cv_path_LD" -+if test -n "$LD"; then -+ AC_MSG_RESULT($LD) -+else -+ AC_MSG_RESULT(no) -+fi -+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -+_LT_PATH_LD_GNU -+AC_SUBST([LD]) -+ -+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries]) -+])# LT_PATH_LD -+ -+# Old names: -+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD]) -+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AM_PROG_LD], []) -+dnl AC_DEFUN([AC_PROG_LD], []) -+ -+ -+# _LT_PATH_LD_GNU -+#- -------------- -+m4_defun([_LT_PATH_LD_GNU], -+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -+[# I'd rather use --version here, but apparently some GNU lds only accept -v. -+case `$LD -v 2>&1 /dev/null 2>&1; then -+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' -+ lt_cv_file_magic_cmd='func_win32_libid' -+ else -+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' -+ lt_cv_file_magic_cmd='$OBJDUMP -f' -+ fi -+ ;; -+ -+cegcc) -+ # use the weaker test based on 'objdump'. See mingw*. -+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' -+ lt_cv_file_magic_cmd='$OBJDUMP -f' -+ ;; -+ -+darwin* | rhapsody*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+freebsd* | dragonfly*) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then -+ case $host_cpu in -+ i*86 ) -+ # Not sure whether the presence of OpenBSD here was a mistake. -+ # Let's accept both of them until this is cleared up. -+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' -+ lt_cv_file_magic_cmd=/usr/bin/file -+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++ link_all_deplibs=yes + ;; -+ esac -+ else -+ lt_cv_deplibs_check_method=pass_all -+ fi -+ ;; -+ -+gnu*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+hpux10.20* | hpux11*) -+ lt_cv_file_magic_cmd=/usr/bin/file -+ case $host_cpu in -+ ia64*) -+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' -+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so -+ ;; -+ hppa*64*) -+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] -+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl -+ ;; -+ *) -+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' -+ lt_cv_file_magic_test_file=/usr/lib/libc.sl -+ ;; -+ esac -+ ;; -+ -+interix[[3-9]]*) -+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here -+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' -+ ;; -+ -+irix5* | irix6* | nonstopux*) -+ case $LD in -+ *-32|*"-32 ") libmagic=32-bit;; -+ *-n32|*"-n32 ") libmagic=N32;; -+ *-64|*"-64 ") libmagic=64-bit;; -+ *) libmagic=never-match;; -+ esac -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+# This must be Linux ELF. -+linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+netbsd* | netbsdelf*-gnu) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then -+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' -+ else -+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' -+ fi -+ ;; -+ -+newos6*) -+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' -+ lt_cv_file_magic_cmd=/usr/bin/file -+ lt_cv_file_magic_test_file=/usr/lib/libnls.so -+ ;; -+ -+*nto* | *qnx*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+openbsd*) -+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' -+ else -+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' -+ fi -+ ;; -+ -+osf3* | osf4* | osf5*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+rdos*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+solaris*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ -+sysv4 | sysv4.3*) -+ case $host_vendor in -+ motorola) -+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' -+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` -+ ;; -+ ncr) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ sequent) -+ lt_cv_file_magic_cmd='/bin/file' -+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' -+ ;; -+ sni) -+ lt_cv_file_magic_cmd='/bin/file' -+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" -+ lt_cv_file_magic_test_file=/lib/libc.so -+ ;; -+ siemens) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ pc) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+ esac -+ ;; -+ -+tpf*) -+ lt_cv_deplibs_check_method=pass_all -+ ;; -+esac -+]) -+file_magic_cmd=$lt_cv_file_magic_cmd -+deplibs_check_method=$lt_cv_deplibs_check_method -+test -z "$deplibs_check_method" && deplibs_check_method=unknown -+ -+_LT_DECL([], [deplibs_check_method], [1], -+ [Method to check whether dependent libraries are shared objects]) -+_LT_DECL([], [file_magic_cmd], [1], -+ [Command to use when deplibs_check_method == "file_magic"]) -+])# _LT_CHECK_MAGIC_METHOD + ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; + -+# LT_PATH_NM -+# ---------- -+# find the pathname to a BSD- or MS-compatible name lister -+AC_DEFUN([LT_PATH_NM], -+[AC_REQUIRE([AC_PROG_CC])dnl -+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, -+[if test -n "$NM"; then -+ # Let the user override the test. -+ lt_cv_path_NM="$NM" -+else -+ lt_nm_to_check="${ac_tool_prefix}nm" -+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then -+ lt_nm_to_check="$lt_nm_to_check nm" -+ fi -+ for lt_tmp_nm in $lt_nm_to_check; do -+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do -+ IFS="$lt_save_ifs" -+ test -z "$ac_dir" && ac_dir=. -+ tmp_nm="$ac_dir/$lt_tmp_nm" -+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then -+ # Check to see if the nm accepts a BSD-compat flag. -+ # Adding the `sed 1q' prevents false positives on HP-UX, which says: -+ # nm: unknown option "B" ignored -+ # Tru64's nm complains that /dev/null is an invalid object file -+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in -+ */dev/null* | *'Invalid file or object type'*) -+ lt_cv_path_NM="$tmp_nm -B" -+ break -+ ;; -+ *) -+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in -+ */dev/null*) -+ lt_cv_path_NM="$tmp_nm -p" -+ break -+ ;; -+ *) -+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but -+ continue # so that we can try to find one that supports BSD flags -+ ;; -+ esac -+ ;; -+ esac ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes # is this really true??? + ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds='$CC -r -o $output$reload_objs' ++ hardcode_direct=no ++ ;; ++ motorola) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; +- esac +- ;; +- solaris*) +- case $cc_basename in +- CC) +- # Sun C++ 4.2, 5.x and Centerline C++ +- no_undefined_flag_CXX=' -zdefs' +- archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var=no ++ ;; + +- hardcode_libdir_flag_spec_CXX='-R$libdir' +- hardcode_shlibpath_var_CXX=no +- case $host_os in +- solaris2.0-5 | solaris2.0-5.*) ;; +- *) +- # The C++ compiler is used as linker so we must use $wl +- # flag to pass the commands to the underlying system +- # linker. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- ;; +- esac +- link_all_deplibs_CXX=yes ++ sysv4.3*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ export_dynamic_flag_spec='-Bexport' ++ ;; + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' +- ;; +- gcx) +- # Green Hills C++ Compiler +- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs=yes + fi -+ done -+ IFS="$lt_save_ifs" -+ done -+ : ${lt_cv_path_NM=no} -+fi]) -+if test "$lt_cv_path_NM" != "no"; then -+ NM="$lt_cv_path_NM" -+else -+ # Didn't find any BSD compatible name lister, look for dumpbin. -+ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) -+ AC_SUBST([DUMPBIN]) -+ if test "$DUMPBIN" != ":"; then -+ NM="$DUMPBIN" -+ fi -+fi -+test -z "$NM" && NM=nm -+AC_SUBST([NM]) -+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl ++ ;; + +- # The C++ compiler must be used to create the archive. +- old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' +- ;; +- *) +- # GNU C++ compiler with Solaris linker +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- no_undefined_flag_CXX=' ${wl}-z ${wl}defs' +- if $CC --version | grep -v '^2\.7' > /dev/null; then +- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag='${wl}-z,text' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ runpath_var='LD_RUN_PATH' + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- else +- # g++ 2.7 appears to require `-G' NOT `-shared' on this +- # platform. +- archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- fi ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag='${wl}-z,text' ++ allow_undefined_flag='${wl}-z,nodefs' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-R,$libdir' ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ export_dynamic_flag_spec='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' + +- hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' +- fi +- ;; ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + -+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], -+ [lt_cv_nm_interface="BSD nm" -+ echo "int some_variable = 0;" > conftest.$ac_ext -+ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) -+ (eval "$ac_compile" 2>conftest.err) -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) -+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) -+ cat conftest.err >&AS_MESSAGE_LOG_FD -+ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) -+ cat conftest.out >&AS_MESSAGE_LOG_FD -+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then -+ lt_cv_nm_interface="MS dumpbin" -+ fi -+ rm -f conftest*]) -+])# LT_PATH_NM ++ uts4*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; + -+# Old names: -+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) -+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AM_PROG_NM], []) -+dnl AC_DEFUN([AC_PROG_NM], []) ++ *) ++ ld_shlibs=no ++ ;; + esac +- ;; +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) +- archive_cmds_need_lc_CXX=no +- ;; +- tandem*) +- case $cc_basename in +- NCC) +- # NonStop-UX NCC 3.20 +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no + ++ if test x$host_vendor = xsni; then ++ case $host in ++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; +- esac +- ;; +- vxworks*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +-esac +-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-echo "${ECHO_T}$ld_shlibs_CXX" >&6 +-test "$ld_shlibs_CXX" = no && can_build_shared=no ++ esac ++ fi ++ fi + +-GCC_CXX="$GXX" +-LD_CXX="$LD" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 ++$as_echo "$ld_shlibs" >&6; } ++test "$ld_shlibs" = no && can_build_shared=no + ++with_gnu_ld=$with_gnu_ld + +-cat > conftest.$ac_ext <&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- # Parse the compiler output and extract the necessary +- # objects, libraries and library flags. + +- # Sentinel used to keep track of whether or not we are before +- # the conftest object file. +- pre_test_object_deps_done=no + +- # The `*' in the case matches for architectures that use `case' in +- # $output_verbose_cmd can trigger glob expansion during the loop +- # eval without this substitution. +- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" + +- for p in `eval $output_verbose_link_cmd`; do +- case $p in + +- -L* | -R* | -l*) +- # Some compilers place space between "-{L,R}" and the path. +- # Remove the space. +- if test $p = "-L" \ +- || test $p = "-R"; then +- prev=$p +- continue +- else +- prev= +- fi + +- if test "$pre_test_object_deps_done" = no; then +- case $p in +- -L* | -R*) +- # Internal compiler library paths should come after those +- # provided the user. The postdeps already come after the +- # user supplied libs so there is no need to process them. +- if test -z "$compiler_lib_search_path_CXX"; then +- compiler_lib_search_path_CXX="${prev}${p}" +- else +- compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" +- fi +- ;; +- # The "-l" case would never come before the object being +- # linked, so don't bother handling this case. +- esac +- else +- if test -z "$postdeps_CXX"; then +- postdeps_CXX="${prev}${p}" +- else +- postdeps_CXX="${postdeps_CXX} ${prev}${p}" +- fi +- fi +- ;; + +- *.$objext) +- # This assumes that the test object file only shows up +- # once in the compiler output. +- if test "$p" = "conftest.$objext"; then +- pre_test_object_deps_done=yes +- continue +- fi + +- if test "$pre_test_object_deps_done" = no; then +- if test -z "$predep_objects_CXX"; then +- predep_objects_CXX="$p" +- else +- predep_objects_CXX="$predep_objects_CXX $p" +- fi +- else +- if test -z "$postdep_objects_CXX"; then +- postdep_objects_CXX="$p" +- else +- postdep_objects_CXX="$postdep_objects_CXX $p" +- fi +- fi +- ;; + +- *) ;; # Ignore the rest. + +- esac +- done + +- # Clean up. +- rm -f a.out a.exe +-else +- echo "libtool.m4: error: problem compiling CXX test program" +-fi + +-$rm -f confest.$objext + +-case " $postdeps_CXX " in +-*" -lc "*) archive_cmds_need_lc_CXX=no ;; +-esac +- +-lt_prog_compiler_wl_CXX= +-lt_prog_compiler_pic_CXX= +-lt_prog_compiler_static_CXX= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 +- +- # C++ specific cases for pic, static, wl, etc. +- if test "$GXX" = yes; then +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX='-static' ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc=yes + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_CXX='-Bstatic' +- fi +- ;; +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' +- ;; +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; +- mingw* | os2* | pw32*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic_CXX='-DDLL_EXPORT' +- ;; +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic_CXX='-fno-common' +- ;; +- *djgpp*) +- # DJGPP does not support shared libraries at all +- lt_prog_compiler_pic_CXX= ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. + ;; +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_prog_compiler_pic_CXX=-Kconform_pic ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 ++$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + -+# LT_LIB_M -+# -------- -+# check for math library -+AC_DEFUN([LT_LIB_M], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+LIBM= -+case $host in -+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) -+ # These system don't have libm, or don't need it -+ ;; -+*-ncr-sysv4.3*) -+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") -+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") -+ ;; -+*) -+ AC_CHECK_LIB(m, cos, LIBM="-lm") ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl ++ pic_flag=$lt_prog_compiler_pic ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag ++ allow_undefined_flag= ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 ++ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ then ++ archive_cmds_need_lc=no ++ else ++ archive_cmds_need_lc=yes ++ fi ++ allow_undefined_flag=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 + fi ++ $RM conftest* ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 ++$as_echo "$archive_cmds_need_lc" >&6; } + ;; +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case "$host_cpu" in +- hppa*64*|ia64*) +- ;; +- *) +- lt_prog_compiler_pic_CXX='-fPIC' +- ;; +- esac +- ;; +- *) +- lt_prog_compiler_pic_CXX='-fPIC' +- ;; +- esac +- else +- case $host_os in +- aix4* | aix5*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_CXX='-Bstatic' +- else +- lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- chorus*) +- case $cc_basename in +- cxch68) +- # Green Hills C++ Compiler +- # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" +- ;; +- esac +- ;; +- dgux*) +- case $cc_basename in +- ec++) +- lt_prog_compiler_pic_CXX='-KPIC' +- ;; +- ghcx) +- # Green Hills C++ Compiler +- lt_prog_compiler_pic_CXX='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- freebsd* | kfreebsd*-gnu) +- # FreeBSD uses GNU C++ +- ;; +- hpux9* | hpux10* | hpux11*) +- case $cc_basename in +- CC) +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" +- if test "$host_cpu" != ia64; then +- lt_prog_compiler_pic_CXX='+Z' +- fi +- ;; +- aCC) +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" +- case "$host_cpu" in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_CXX='+Z' +- ;; +- esac +- ;; +- *) +- ;; +- esac +- ;; +- irix5* | irix6* | nonstopux*) +- case $cc_basename in +- CC) +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX='-non_shared' +- # CC pic flag -KPIC is the default. +- ;; +- *) +- ;; +- esac +- ;; +- linux*) +- case $cc_basename in +- KCC) +- # KAI C++ Compiler +- lt_prog_compiler_wl_CXX='--backend -Wl,' +- lt_prog_compiler_pic_CXX='-fPIC' +- ;; +- icpc) +- # Intel C++ +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_pic_CXX='-KPIC' +- lt_prog_compiler_static_CXX='-static' +- ;; +- cxx) +- # Compaq C++ +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- lt_prog_compiler_pic_CXX= +- lt_prog_compiler_static_CXX='-non_shared' +- ;; +- *) +- ;; +- esac +- ;; +- lynxos*) +- ;; +- m88k*) +- ;; +- mvs*) +- case $cc_basename in +- cxx) +- lt_prog_compiler_pic_CXX='-W c,exportall' +- ;; +- *) +- ;; +- esac +- ;; +- netbsd*) +- ;; +- osf3* | osf4* | osf5*) +- case $cc_basename in +- KCC) +- lt_prog_compiler_wl_CXX='--backend -Wl,' +- ;; +- RCC) +- # Rational C++ 2.4.1 +- lt_prog_compiler_pic_CXX='-pic' +- ;; +- cxx) +- # Digital/Compaq C++ +- lt_prog_compiler_wl_CXX='-Wl,' +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- lt_prog_compiler_pic_CXX= +- lt_prog_compiler_static_CXX='-non_shared' +- ;; +- *) +- ;; +- esac +- ;; +- psos*) +- ;; +- sco*) +- case $cc_basename in +- CC) +- lt_prog_compiler_pic_CXX='-fPIC' +- ;; +- *) +- ;; +- esac +- ;; +- solaris*) +- case $cc_basename in +- CC) +- # Sun C++ 4.2, 5.x and Centerline C++ +- lt_prog_compiler_pic_CXX='-KPIC' +- lt_prog_compiler_static_CXX='-Bstatic' +- lt_prog_compiler_wl_CXX='-Qoption ld ' +- ;; +- gcx) +- # Green Hills C++ Compiler +- lt_prog_compiler_pic_CXX='-PIC' +- ;; +- *) +- ;; +- esac +- ;; +- sunos4*) +- case $cc_basename in +- CC) +- # Sun C++ 4.x +- lt_prog_compiler_pic_CXX='-pic' +- lt_prog_compiler_static_CXX='-Bstatic' +- ;; +- lcc) +- # Lucid +- lt_prog_compiler_pic_CXX='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- tandem*) +- case $cc_basename in +- NCC) +- # NonStop-UX NCC 3.20 +- lt_prog_compiler_pic_CXX='-KPIC' +- ;; +- *) +- ;; +- esac +- ;; +- unixware*) +- ;; +- vxworks*) +- ;; +- *) +- lt_prog_compiler_can_build_shared_CXX=no +- ;; + esac + fi + ;; +esac -+AC_SUBST([LIBM]) -+])# LT_LIB_M -+ -+# Old name: -+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_CHECK_LIBM], []) -+ -+ -+# _LT_COMPILER_NO_RTTI([TAGNAME]) -+# ------------------------------- -+m4_defun([_LT_COMPILER_NO_RTTI], -+[m4_require([_LT_TAG_COMPILER])dnl -+ -+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -+ + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6 + +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic_CXX"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6 +-if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_pic_works_CXX=no +- ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:11044: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:11048: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then +- lt_prog_compiler_pic_works_CXX=yes +- fi +- fi +- $rm conftest* + +-fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6 + +-if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then +- case $lt_prog_compiler_pic_CXX in +- "" | " "*) ;; +- *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; +- esac +-else +- lt_prog_compiler_pic_CXX= +- lt_prog_compiler_can_build_shared_CXX=no +-fi + +-fi +-case "$host_os" in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- lt_prog_compiler_pic_CXX= +- ;; +- *) +- lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" +- ;; +-esac + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_prog_compiler_c_o_CXX=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:11104: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:11108: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s out/conftest.err; then +- lt_cv_prog_compiler_c_o_CXX=yes +- fi +- fi +- chmod u+w . +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6 + + +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 +- if test "$hard_links" = no; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn +- fi +-else +- need_locks=no +-fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + +- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- case $host_os in +- aix4* | aix5*) +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- ;; +- pw32*) +- export_symbols_cmds_CXX="$ltdll_cmds" +- ;; +- cygwin* | mingw*) +- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* $[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' +- ;; +- *) +- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- ;; +- esac + +-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-echo "${ECHO_T}$ld_shlibs_CXX" >&6 +-test "$ld_shlibs_CXX" = no && can_build_shared=no + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi + +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc_CXX" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc_CXX=yes + +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds_CXX in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 +- $rm conftest* +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl_CXX +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag_CXX +- allow_undefined_flag_CXX= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc_CXX=no +- else +- archive_cmds_need_lc_CXX=yes +- fi +- allow_undefined_flag_CXX=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6 +- ;; +- esac +- fi +- ;; +-esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +-if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +-else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +-fi +-need_lib_prefix=unknown +-hardcode_into_libs=no + +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown + +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH + +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; + +-aix4* | aix5*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; + +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; + +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; + +-bsdi4*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; + +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes + +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' +- ;; +- esac +- ;; + +- *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' +- ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; + +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' +- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. +- if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` +- else +- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' +- fi +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; + +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-freebsd1*) +- dynamic_linker=no +- ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; + +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.01* | freebsdelf3.01*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- *) # from 3.2 on +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- esac +- ;; + +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; + +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case "$host_cpu" in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; + +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; + +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; + +-# This must be Linux ELF. +-linux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 11615 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac + +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" +- fi + +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; + +-knetbsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; + +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; + +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; + +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; + +-openbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=yes +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; + +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; + +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; + +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; + +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; + +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; + +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-*) +- dynamic_linker=no +- ;; +-esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 +-test "$dynamic_linker" = no && can_build_shared=no + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +-hardcode_action_CXX= +-if test -n "$hardcode_libdir_flag_spec_CXX" || \ +- test -n "$runpath_var CXX" || \ +- test "X$hardcode_automatic_CXX"="Xyes" ; then + +- # We can hardcode non-existant directories. +- if test "$hardcode_direct_CXX" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && +- test "$hardcode_minus_L_CXX" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action_CXX=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action_CXX=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action_CXX=unsupported +-fi +-echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 +-echo "${ECHO_T}$hardcode_action_CXX" >&6 + +-if test "$hardcode_action_CXX" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi + +-striplib= +-old_striplib= +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +- else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- ;; +- *) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +- ;; +- esac +-fi + +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= + +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ;; + +- mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; + +- cygwin*) +- lt_cv_dlopen="dlopen" +- lt_cv_dlopen_libs= +- ;; + +- darwin*) +- # if libdl is installed we need to link against it +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dl_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else + +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes + +-fi + +- ;; + +- *) +- echo "$as_me:$LINENO: checking for shl_load" >&5 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +-if test "${ac_cv_func_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define shl_load to an innocuous variant, in case declares shl_load. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shl_load innocuous_shl_load + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shl_load (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef shl_load + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_shl_load) || defined (__stub___shl_load) +-choke me +-#else +-char (*f) () = shl_load; +-#endif +-#ifdef __cplusplus +-} +-#endif + +-int +-main () +-{ +-return f != shl_load; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +-if test $ac_cv_func_shl_load = yes; then +- lt_cv_dlopen="shl_load" +-else +- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-int +-main () +-{ +-shl_load (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dld_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +-if test $ac_cv_lib_dld_shl_load = yes; then +- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +-else +- echo "$as_me:$LINENO: checking for dlopen" >&5 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +-if test "${ac_cv_func_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define dlopen to an innocuous variant, in case declares dlopen. +- For example, HP-UX 11i declares gettimeofday. */ +-#define dlopen innocuous_dlopen + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char dlopen (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef dlopen + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_dlopen) || defined (__stub___dlopen) +-choke me +-#else +-char (*f) () = dlopen; +-#endif +-#ifdef __cplusplus +-} +-#endif + +-int +-main () +-{ +-return f != dlopen; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_func_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +-if test $ac_cv_func_dlopen = yes; then +- lt_cv_dlopen="dlopen" +-else +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dl_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +-if test "${ac_cv_lib_svld_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lsvld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_svld_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_svld_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +-if test $ac_cv_lib_svld_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +-else +- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_dld_link+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dld_link (); +-int +-main () +-{ +-dld_link (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_dld_link=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_dld_dld_link=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +-if test $ac_cv_lib_dld_dld_link = yes; then +- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +-fi + + +-fi + + +-fi + + +-fi + + +-fi + + +-fi + +- ;; +- esac + +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no +- fi + +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + +- save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" + +- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif + +-#include + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self=no +- fi +-fi +-rm -fr conftest* + + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + +- if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" +- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self_static+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self_static=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif + +-#include + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif +- +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif +- +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self_static=no +- fi +-fi +-rm -fr conftest* + + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 +- fi + +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac + +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac + +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; +- esac +-fi + + +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_CXX \ +- CC_CXX \ +- LD_CXX \ +- lt_prog_compiler_wl_CXX \ +- lt_prog_compiler_pic_CXX \ +- lt_prog_compiler_static_CXX \ +- lt_prog_compiler_no_builtin_flag_CXX \ +- export_dynamic_flag_spec_CXX \ +- thread_safe_flag_spec_CXX \ +- whole_archive_flag_spec_CXX \ +- enable_shared_with_static_runtimes_CXX \ +- old_archive_cmds_CXX \ +- old_archive_from_new_cmds_CXX \ +- predep_objects_CXX \ +- postdep_objects_CXX \ +- predeps_CXX \ +- postdeps_CXX \ +- compiler_lib_search_path_CXX \ +- archive_cmds_CXX \ +- archive_expsym_cmds_CXX \ +- postinstall_cmds_CXX \ +- postuninstall_cmds_CXX \ +- old_archive_from_expsyms_cmds_CXX \ +- allow_undefined_flag_CXX \ +- no_undefined_flag_CXX \ +- export_symbols_cmds_CXX \ +- hardcode_libdir_flag_spec_CXX \ +- hardcode_libdir_flag_spec_ld_CXX \ +- hardcode_libdir_separator_CXX \ +- hardcode_automatic_CXX \ +- module_cmds_CXX \ +- module_expsym_cmds_CXX \ +- lt_cv_prog_compiler_c_o_CXX \ +- exclude_expsyms_CXX \ +- include_expsyms_CXX; do +- +- case $var in +- old_archive_cmds_CXX | \ +- old_archive_from_new_cmds_CXX | \ +- archive_cmds_CXX | \ +- archive_expsym_cmds_CXX | \ +- module_cmds_CXX | \ +- module_expsym_cmds_CXX | \ +- old_archive_from_expsyms_cmds_CXX | \ +- export_symbols_cmds_CXX | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done + +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac + +-cfgfile="$ofile" + +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_CXX + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install + +-# The host system. +-host_alias=$host_alias +-host=$host + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS + +-# A C compiler. +-LTCC=$lt_LTCC + +-# A language-specific compiler. +-CC=$lt_compiler_CXX + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_CXX + +-# An ERE matcher. +-EGREP=$lt_EGREP + +-# The linker used to build libraries. +-LD=$lt_LD_CXX + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S + +-# A BSD-compatible nm program. +-NM=$lt_NM + +-# A symbol stripping program +-STRIP=$lt_STRIP + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" + +-# Used on cygwin: assembler. +-AS="$AS" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 ++$as_echo_n "checking dynamic linker characteristics... " >&6; } + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir +if test "$GCC" = yes; then -+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -+ -+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], -+ lt_cv_prog_compiler_rtti_exceptions, -+ [-fno-rtti -fno-exceptions], [], -+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ fi ++ done ++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[lt_foo]++; } ++ if (lt_freq[lt_foo] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi -+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], -+ [Compiler flag to turn off builtin functions]) -+])# _LT_COMPILER_NO_RTTI -+ -+ -+# _LT_CMD_GLOBAL_SYMBOLS -+# ---------------------- -+m4_defun([_LT_CMD_GLOBAL_SYMBOLS], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+AC_REQUIRE([AC_PROG_CC])dnl -+AC_REQUIRE([LT_PATH_NM])dnl -+AC_REQUIRE([LT_PATH_LD])dnl -+m4_require([_LT_DECL_SED])dnl -+m4_require([_LT_DECL_EGREP])dnl -+m4_require([_LT_TAG_COMPILER])dnl -+ -+# Check for command to grab the raw symbol name followed by C symbol from nm. -+AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -+[ -+# These are sane defaults that work on at least a few old systems. -+# [They come from Ultrix. What could be older than Ultrix?!! ;)] -+ -+# Character class describing NM global symbol codes. -+symcode='[[BCDEGRST]]' -+ -+# Regexp to match symbols that can be accessed directly from C. -+sympat='$[[_A-Za-z]][[_A-Za-z0-9]]*$' -+ -+# Define system-specific variables. ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++need_lib_prefix=unknown ++hardcode_into_libs=no + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_CXX +case $host_os in -+aix*) -+ symcode='[[BCDT]]' -+ ;; -+cygwin* | mingw* | pw32* | cegcc*) -+ symcode='[[ABCDGISTW]]' ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH + +-# Object file suffix (normally "o"). +-objext="$ac_objext" ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' + ;; -+hpux*) + +-# Old archive suffix (normally "a"). +-libext="$libext" ++aix[4-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes + if test "$host_cpu" = ia64; then -+ symcode='[[ABCDEGRST]]' -+ fi -+ ;; -+irix* | nonstopux*) -+ symcode='[[BCDEGRST]]' -+ ;; -+osf*) -+ symcode='[[BCDEGQRST]]' -+ ;; -+solaris*) -+ symcode='[[BDRT]]' -+ ;; -+sco3.2v5*) -+ symcode='[[DT]]' -+ ;; -+sysv4.2uw2*) -+ symcode='[[DT]]' -+ ;; -+sysv5* | sco5v6* | unixware* | OpenUNIX*) -+ symcode='[[ABDT]]' -+ ;; -+sysv4) -+ symcode='[[DFNSTU]]' -+ ;; -+esac -+ -+# If we're using GNU nm, then use its standard symbol codes. -+case `$NM -V 2>&1` in -+*GNU* | *'with BFD'*) -+ symcode='[[ABCDGIRSTW]]' ;; -+esac -+ -+# Transform an extracted symbol line into a proper C declaration. -+# Some systems (esp. on ia64) link data and code symbols differently, -+# so use this general approach. -+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" -+ -+# Transform an extracted symbol line into symbol name and symbol address -+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p'" -+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $lib[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"lib\2\", (void *) \&\2},/p'" -+ -+# Handle CRLF in mingw tool chain -+opt_cr= -+case $build_os in -+mingw*) -+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp -+ ;; -+esac -+ -+# Try without a prefix underscore, then with it. -+for ac_symprfx in "" "_"; do -+ -+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. -+ symxfrm="\\1 $ac_symprfx\\2 \\2" -+ -+ # Write the raw and C identifiers. -+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then -+ # Fake it for dumpbin and say T for any non-static function -+ # and D for any global variable. -+ # Also find C++ and __fastcall symbols from MSVC++, -+ # which start with @ or ?. -+ lt_cv_sys_global_symbol_pipe="$AWK ['"\ -+" {last_section=section; section=\$ 3};"\ -+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -+" \$ 0!~/External *\|/{next};"\ -+" / 0+ UNDEF /{next}; / UNDEF $[^|]$*()/{next};"\ -+" {if(hide[section]) next};"\ -+" {f=0}; \$ 0~/.*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -+" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -+" ' prfx=^$ac_symprfx]" ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH + else -+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]$$symcode$symcode*$[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" -+ fi -+ -+ # Check to see that the pipe works correctly. -+ pipe_works=no -+ -+ rm -f conftest* -+ cat > conftest.$ac_ext <<_LT_EOF -+#ifdef __cplusplus -+extern "C" { -+#endif -+char nm_test_var; -+void nm_test_func(void); -+void nm_test_func(void){} -+#ifdef __cplusplus -+} -+#endif -+int main(){nm_test_var='a';nm_test_func();return(0);} -+_LT_EOF -+ -+ if AC_TRY_EVAL(ac_compile); then -+ # Now try to grab the symbols. -+ nlist=conftest.nm -+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then -+ # Try sorting and uniquifying the output. -+ if sort "$nlist" | uniq > "$nlist"T; then -+ mv -f "$nlist"T "$nlist" -+ else -+ rm -f "$nlist"T -+ fi -+ -+ # Make sure that we snagged all the symbols we need. -+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then -+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then -+ cat <<_LT_EOF > conftest.$ac_ext -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+_LT_EOF -+ # Now generate the symbol file. -+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' -+ -+ cat <<_LT_EOF >> conftest.$ac_ext -+ -+/* The mapping between symbol names and symbols. */ -+const struct { -+ const char *name; -+ void *address; -+} -+lt__PROGRAM__LTX_preloaded_symbols[[]] = -+{ -+ { "@PROGRAM@", (void *) 0 }, -+_LT_EOF -+ $SED "s/^$symcode$symcode* $.*$ $.*$$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext -+ cat <<\_LT_EOF >> conftest.$ac_ext -+ {0, (void *) 0} -+}; -+ -+/* This works around a problem in FreeBSD linker */ -+#ifdef FREEBSD_WORKAROUND -+static const void *lt_preloaded_setup() { -+ return lt__PROGRAM__LTX_preloaded_symbols; -+} -+#endif -+ -+#ifdef __cplusplus -+} -+#endif -+_LT_EOF -+ # Now try linking the two files. -+ mv conftest.$ac_objext conftstm.$ac_objext -+ lt_save_LIBS="$LIBS" -+ lt_save_CFLAGS="$CFLAGS" -+ LIBS="conftstm.$ac_objext" -+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" -+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then -+ pipe_works=yes -+ fi -+ LIBS="$lt_save_LIBS" -+ CFLAGS="$lt_save_CFLAGS" -+ else -+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD -+ fi ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then ++ : + else -+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD ++ can_build_shared=no + fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else -+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' + fi -+ else -+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD -+ cat conftest.$ac_ext >&5 -+ fi -+ rm -rf conftest* conftst* -+ -+ # Do not use the global_symbol_pipe unless it works. -+ if test "$pipe_works" = yes; then -+ break -+ else -+ lt_cv_sys_global_symbol_pipe= ++ shlibpath_var=LIBPATH + fi -+done -+]) -+if test -z "$lt_cv_sys_global_symbol_pipe"; then -+ lt_cv_sys_global_symbol_to_cdecl= -+fi -+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then -+ AC_MSG_RESULT(failed) -+else -+ AC_MSG_RESULT(ok) -+fi -+ -+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], -+ [Take the output of nm and produce a listing of raw symbols and C names]) -+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], -+ [Transform the output of nm in a proper C declaration]) -+_LT_DECL([global_symbol_to_c_name_address], -+ [lt_cv_sys_global_symbol_to_c_name_address], [1], -+ [Transform the output of nm in a C name address pair]) -+_LT_DECL([global_symbol_to_c_name_address_lib_prefix], -+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], -+ [Transform the output of nm in a C name address pair when lib prefix is needed]) -+]) # _LT_CMD_GLOBAL_SYMBOLS -+ -+ -+# _LT_COMPILER_PIC([TAGNAME]) -+# --------------------------- -+m4_defun([_LT_COMPILER_PIC], -+[m4_require([_LT_TAG_COMPILER])dnl -+_LT_TAGVAR(lt_prog_compiler_wl, $1)= -+_LT_TAGVAR(lt_prog_compiler_pic, $1)= -+_LT_TAGVAR(lt_prog_compiler_static, $1)= -+ -+AC_MSG_CHECKING([for $compiler option to produce PIC]) -+m4_if([$1], [CXX], [ -+ # C++ specific cases for pic, static, wl, etc. -+ if test "$GXX" = yes; then -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ -+ case $host_os in -+ aix*) -+ # All AIX code is PIC. -+ if test "$host_cpu" = ia64; then -+ # AIX 5 now supports IA64 processor -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ fi -+ ;; -+ -+ amigaos*) -+ case $host_cpu in -+ powerpc) -+ # see comment about AmigaOS4 .so support -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ ;; -+ m68k) -+ # FIXME: we need at least 68020 code to build shared libraries, but -+ # adding the `-m68020' flag to GCC prevents building anything better, -+ # like `-m68040'. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' -+ ;; -+ esac -+ ;; -+ -+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) -+ # PIC is the default for these OSes. -+ ;; -+ mingw* | cygwin* | os2* | pw32* | cegcc*) -+ # This hack is so that the source file can tell whether it is being -+ # built for inclusion in a dll (and should export symbols for example). -+ # Although the cygwin gcc ignores -fPIC, still need this for old-style -+ # (--disable-auto-import) libraries -+ m4_if([$1], [GCJ], [], -+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) -+ ;; -+ darwin* | rhapsody*) -+ # PIC is the default on this platform -+ # Common symbols not allowed in MH_DYLIB files -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' -+ ;; -+ *djgpp*) -+ # DJGPP does not support shared libraries at all -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)= -+ ;; -+ interix[[3-9]]*) -+ # Interix 3.x gcc -fpic/-fPIC options generate broken code. -+ # Instead, we relocate shared libraries at runtime. -+ ;; -+ sysv4*MP*) -+ if test -d /usr/nec; then -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic -+ fi -+ ;; -+ hpux*) -+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit -+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag -+ # sets the default TLS model and affects inlining. -+ case $host_cpu in -+ hppa*64*) -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ ;; -+ esac ++ ;; + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' ++amigaos*) ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ ;; ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ esac ++ ;; + +-# Executable file suffix (normally ""). +-exeext="$exeext" ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_CXX +-pic_mode=$pic_mode ++bsdi[45]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len ++cygwin* | mingw* | pw32* | cegcc*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes + +-# Must we lock files when doing compilation ? +-need_locks=$lt_need_locks ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; -+ *qnx* | *nto*) -+ # QNX uses GNU C++, but need to define -shared option too, otherwise -+ # it will coredump. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ mingw* | cegcc*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi + ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac ++ ;; + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; + +-# Do we need a version for libraries? +-need_version=$need_version +- +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_CXX ++freebsd1*) ++ dynamic_linker=no ++ ;; + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` + else + case $host_os in -+ aix[[4-9]]*) -+ # All AIX code is PIC. -+ if test "$host_cpu" = ia64; then -+ # AIX 5 now supports IA64 processor -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX ++interix[3-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; + +-# Library versioning type. +-version_type=$version_type ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux + else -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' -+ fi -+ ;; -+ chorus*) -+ case $cc_basename in -+ cxch68*) -+ # Green Hills C++ Compiler -+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" -+ ;; -+ esac -+ ;; -+ dgux*) -+ case $cc_basename in -+ ec++*) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ ;; -+ ghcx*) -+ # Green Hills C++ Compiler -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ freebsd* | dragonfly*) -+ # FreeBSD uses GNU C++ -+ ;; -+ hpux9* | hpux10* | hpux11*) -+ case $cc_basename in -+ CC*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' -+ if test "$host_cpu" != ia64; then -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' -+ fi -+ ;; -+ aCC*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' -+ case $host_cpu in -+ hppa*64*|ia64*) -+ # +Z the default -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' -+ ;; -+ esac -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ interix*) -+ # This is c89, which is MS Visual C++ (no shared libs) -+ # Anyone wants to do a port? -+ ;; -+ irix5* | irix6* | nonstopux*) -+ case $cc_basename in -+ CC*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ # CC pic flag -KPIC is the default. -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ case $cc_basename in -+ KCC*) -+ # KAI C++ Compiler -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ ;; -+ ecpc* ) -+ # old Intel C++ for x86_64 which still supported -KPIC. -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ ;; -+ icpc* ) -+ # Intel C++, used to be incompatible with GCC. -+ # ICC 10 doesn't accept -KPIC any more. -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ ;; -+ pgCC* | pgcpp*) -+ # Portland Group C++ compiler -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ cxx*) -+ # Compaq C++ -+ # Make sure the PIC flag is empty. It appears that all Alpha -+ # Linux and Compaq Tru64 Unix objects are PIC. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)= -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ xlc* | xlC*) -+ # IBM XL 8.0 on PPC -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' -+ ;; -+ *) -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C++ 5.9 -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' -+ ;; -+ esac -+ ;; -+ esac -+ ;; -+ lynxos*) -+ ;; -+ m88k*) -+ ;; -+ mvs*) -+ case $cc_basename in -+ cxx*) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ netbsd* | netbsdelf*-gnu) -+ ;; -+ *qnx* | *nto*) -+ # QNX uses GNU C++, but need to define -shared option too, otherwise -+ # it will coredump. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' -+ ;; -+ osf3* | osf4* | osf5*) -+ case $cc_basename in -+ KCC*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' -+ ;; -+ RCC*) -+ # Rational C++ 2.4.1 -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -+ ;; -+ cxx*) -+ # Digital/Compaq C++ -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ # Make sure the PIC flag is empty. It appears that all Alpha -+ # Linux and Compaq Tru64 Unix objects are PIC. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)= -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ psos*) -+ ;; -+ solaris*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.2, 5.x and Centerline C++ -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' -+ ;; -+ gcx*) -+ # Green Hills C++ Compiler -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ sunos4*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.x -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ lcc*) -+ # Lucid -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) -+ case $cc_basename in -+ CC*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ esac -+ ;; -+ tandem*) -+ case $cc_basename in -+ NCC*) -+ # NonStop-UX NCC 3.20 -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ ;; -+ *) -+ ;; -+ esac -+ ;; -+ vxworks*) -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no -+ ;; ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; + esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++# This must be Linux ELF. ++linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ ++ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++int ++main () ++{ + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_CXX +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : ++ shlibpath_overrides_runpath=yes ++fi ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi -+], -+[ -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_CXX +-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_CXX +-module_expsym_cmds=$lt_module_expsym_cmds_CXX ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_CXX ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; + +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_CXX ++*nto* | *qnx*) ++ version_type=qnx ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' ++ ;; + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_CXX ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in -+ aix*) -+ # All AIX code is PIC. -+ if test "$host_cpu" = ia64; then -+ # AIX 5 now supports IA64 processor -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ fi -+ ;; -+ -+ amigaos*) -+ case $host_cpu in -+ powerpc) -+ # see comment about AmigaOS4 .so support -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ ;; -+ m68k) -+ # FIXME: we need at least 68020 code to build shared libraries, but -+ # adding the `-m68020' flag to GCC prevents building anything better, -+ # like `-m68040'. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' -+ ;; -+ esac -+ ;; -+ -+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) -+ # PIC is the default for these OSes. -+ ;; -+ -+ mingw* | cygwin* | pw32* | os2* | cegcc*) -+ # This hack is so that the source file can tell whether it is being -+ # built for inclusion in a dll (and should export symbols for example). -+ # Although the cygwin gcc ignores -fPIC, still need this for old-style -+ # (--disable-auto-import) libraries -+ m4_if([$1], [GCJ], [], -+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) -+ ;; -+ -+ darwin* | rhapsody*) -+ # PIC is the default on this platform -+ # Common symbols not allowed in MH_DYLIB files -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' -+ ;; -+ -+ hpux*) -+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit -+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag -+ # sets the default TLS model and affects inlining. -+ case $host_cpu in -+ hppa*64*) -+ # +Z the default ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no + ;; + *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ shlibpath_overrides_runpath=yes + ;; + esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; + +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_CXX ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; + +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++rdos*) ++ dynamic_linker=no ++ ;; + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_CXX ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_CXX ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ runpath_var=LD_RUN_PATH + ;; -+ -+ interix[[3-9]]*) -+ # Interix 3.x gcc -fpic/-fPIC options generate broken code. -+ # Instead, we relocate shared libraries at runtime. -+ ;; -+ -+ msdosdjgpp*) -+ # Just because we use GCC doesn't mean we suddenly get shared libraries -+ # on systems that don't support them. -+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no -+ enable_shared=no -+ ;; -+ -+ *nto* | *qnx*) -+ # QNX uses GNU C++, but need to define -shared option too, otherwise -+ # it will coredump. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' -+ ;; -+ -+ sysv4*MP*) -+ if test -d /usr/nec; then -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic -+ fi ++ siemens) ++ need_lib_prefix=no + ;; -+ -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; -+ esac ++ esac ++ ;; + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else -+ # PORTME Check for flag to pass linker flags through the system compiler. ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in -+ aix*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ if test "$host_cpu" = ia64; then -+ # AIX 5 now supports IA64 processor -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ else -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' -+ fi -+ ;; -+ -+ mingw* | cygwin* | pw32* | os2* | cegcc*) -+ # This hack is so that the source file can tell whether it is being -+ # built for inclusion in a dll (and should export symbols for example). -+ m4_if([$1], [GCJ], [], -+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) -+ ;; -+ -+ hpux9* | hpux10* | hpux11*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but -+ # not for PA HP-UX. -+ case $host_cpu in -+ hppa*64*|ia64*) -+ # +Z the default -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' -+ ;; -+ esac -+ # Is there a better lt_prog_compiler_static that works with the bundled CC? -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' -+ ;; -+ -+ irix5* | irix6* | nonstopux*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ # PIC (with -KPIC) is the default. -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ case $cc_basename in -+ # old Intel for x86_64 which still supported -KPIC. -+ ecc*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ ;; -+ # icc used to be incompatible with GCC. -+ # ICC 10 doesn't accept -KPIC any more. -+ icc* | ifort*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -+ ;; -+ # Lahey Fortran 8.1. -+ lf95*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' -+ ;; -+ pgcc* | pgf77* | pgf90* | pgf95*) -+ # Portland Group compilers (*not* the Pentium gcc compiler, -+ # which looks to be a dead project) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ ccc*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ # All Alpha code is PIC. -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ xl*) -+ # IBM XL C 8.0/Fortran 10.1 on PPC -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' -+ ;; -+ *) -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C 5.9 -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ ;; -+ *Sun\ F*) -+ # Sun Fortran 8.3 passes all unrecognized flags to the linker -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='' -+ ;; -+ esac ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; -+ esac -+ ;; -+ -+ newsos6) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ -+ *nto* | *qnx*) -+ # QNX uses GNU C++, but need to define -shared option too, otherwise -+ # it will coredump. -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' -+ ;; -+ -+ osf3* | osf4* | osf5*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ # All OSF/1 code is PIC. -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ -+ rdos*) -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' -+ ;; -+ -+ solaris*) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ case $cc_basename in -+ f77* | f90* | f95*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; -+ esac -+ ;; -+ -+ sunos4*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ -+ sysv4 | sysv4.2uw2* | sysv4.3*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ -+ sysv4*MP*) -+ if test -d /usr/nec ;then -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ fi -+ ;; -+ -+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; -+ -+ unicos*) -+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' -+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no -+ ;; -+ -+ uts4*) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' -+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' -+ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++*) ++ dynamic_linker=no ++ ;; ++esac ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 ++$as_echo "$dynamic_linker" >&6; } ++test "$dynamic_linker" = no && can_build_shared=no + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++fi ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++fi + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_CXX + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX + +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX + +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_CXX + +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_CXX + +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX + +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_CXX + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_CXX + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path_CXX" + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_CXX + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_CXX + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_CXX + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_CXX + +-# ### END LIBTOOL TAG CONFIG: $tagname + +-__EOF__ + + +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi + + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-CC=$lt_save_CC +-LDCXX=$LD +-LD=$lt_save_LD +-GCC=$lt_save_GCC +-with_gnu_ldcxx=$with_gnu_ld +-with_gnu_ld=$lt_save_with_gnu_ld +-lt_cv_path_LDCXX=$lt_cv_path_LD +-lt_cv_path_LD=$lt_save_path_LD +-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld + +- else +- tagname="" +- fi +- ;; + +- F77) +- if test -n "$F77" && test "X$F77" != "Xno"; then + +-ac_ext=f +-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_f77_compiler_gnu +- +- +-archive_cmds_need_lc_F77=no +-allow_undefined_flag_F77= +-always_export_symbols_F77=no +-archive_expsym_cmds_F77= +-export_dynamic_flag_spec_F77= +-hardcode_direct_F77=no +-hardcode_libdir_flag_spec_F77= +-hardcode_libdir_flag_spec_ld_F77= +-hardcode_libdir_separator_F77= +-hardcode_minus_L_F77=no +-hardcode_automatic_F77=no +-module_cmds_F77= +-module_expsym_cmds_F77= +-link_all_deplibs_F77=unknown +-old_archive_cmds_F77=$old_archive_cmds +-no_undefined_flag_F77= +-whole_archive_flag_spec_F77= +-enable_shared_with_static_runtimes_F77=no + +-# Source file extension for f77 test sources. +-ac_ext=f + +-# Object file extension for compiled f77 test sources. +-objext=o +-objext_F77=$objext + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code=" subroutine t\n return\n end\n" + +-# Code to be used in simple link tests +-lt_simple_link_test_code=" program t\n end\n" + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} + +-# Allow CC to be a program name with arguments. +-compiler=$CC + + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${F77-"f77"} +-compiler=$CC +-compiler_F77=$CC +-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-echo "${ECHO_T}$can_build_shared" >&6 +- +-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 +-test "$can_build_shared" = "no" && enable_shared=no +- +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case "$host_os" in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; +-aix4* | aix5*) +- test "$enable_shared" = yes && enable_static=no +- ;; +-esac +-echo "$as_me:$LINENO: result: $enable_shared" >&5 +-echo "${ECHO_T}$enable_shared" >&6 + +-echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-echo "$as_me:$LINENO: result: $enable_static" >&5 +-echo "${ECHO_T}$enable_static" >&6 + +-test "$ld_shlibs_F77" = no && can_build_shared=no + +-GCC_F77="$G77" +-LD_F77="$LD" + +-lt_prog_compiler_wl_F77= +-lt_prog_compiler_pic_F77= +-lt_prog_compiler_static_F77= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + +- if test "$GCC" = yes; then +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_static_F77='-static' + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_F77='-Bstatic' +- fi +- ;; + +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' +- ;; + +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; + +- mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic_F77='-DDLL_EXPORT' +- ;; + +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic_F77='-fno-common' +- ;; + +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- lt_prog_compiler_can_build_shared_F77=no +- enable_shared=no +- ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_prog_compiler_pic_F77=-Kconform_pic +- fi +- ;; + +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case "$host_cpu" in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_F77='-fPIC' +- ;; +- esac +- ;; + +- *) +- lt_prog_compiler_pic_F77='-fPIC' +- ;; +- esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- lt_prog_compiler_wl_F77='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_F77='-Bstatic' +- else +- lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; + +- mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic_F77='-DDLL_EXPORT' +- ;; + +- hpux9* | hpux10* | hpux11*) +- lt_prog_compiler_wl_F77='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case "$host_cpu" in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_F77='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- lt_prog_compiler_static_F77='${wl}-a ${wl}archive' +- ;; + +- irix5* | irix6* | nonstopux*) +- lt_prog_compiler_wl_F77='-Wl,' +- # PIC (with -KPIC) is the default. +- lt_prog_compiler_static_F77='-non_shared' +- ;; + +- newsos6) +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; + +- linux*) +- case $CC in +- icc* | ecc*) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-static' +- ;; +- ccc*) +- lt_prog_compiler_wl_F77='-Wl,' +- # All Alpha code is PIC. +- lt_prog_compiler_static_F77='-non_shared' +- ;; +- esac +- ;; + +- osf3* | osf4* | osf5*) +- lt_prog_compiler_wl_F77='-Wl,' +- # All OSF/1 code is PIC. +- lt_prog_compiler_static_F77='-non_shared' +- ;; + +- sco3.2v5*) +- lt_prog_compiler_pic_F77='-Kpic' +- lt_prog_compiler_static_F77='-dn' +- ;; + +- solaris*) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; + +- sunos4*) +- lt_prog_compiler_wl_F77='-Qoption ld ' +- lt_prog_compiler_pic_F77='-PIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; + +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; + +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_prog_compiler_pic_F77='-Kconform_pic' +- lt_prog_compiler_static_F77='-Bstatic' +- fi +- ;; + +- uts4*) +- lt_prog_compiler_pic_F77='-pic' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; + +- *) +- lt_prog_compiler_can_build_shared_F77=no +- ;; +- esac +- fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6 + +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic_F77"; then + +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6 +-if test "${lt_prog_compiler_pic_works_F77+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_pic_works_F77=no +- ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic_F77" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:13411: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:13415: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then +- lt_prog_compiler_pic_works_F77=yes +- fi +- fi +- $rm conftest* + +-fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6 + +-if test x"$lt_prog_compiler_pic_works_F77" = xyes; then +- case $lt_prog_compiler_pic_F77 in +- "" | " "*) ;; +- *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; +- esac +-else +- lt_prog_compiler_pic_F77= +- lt_prog_compiler_can_build_shared_F77=no +-fi + +-fi +-case "$host_os" in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- lt_prog_compiler_pic_F77= +- ;; +- *) +- lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" +- ;; +-esac + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_prog_compiler_c_o_F77=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:13471: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:13475: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s out/conftest.err; then +- lt_cv_prog_compiler_c_o_F77=yes +- fi +- fi +- chmod u+w . +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6 + + +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 +- if test "$hard_links" = no; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn +- fi +-else +- need_locks=no +-fi + +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + +- runpath_var= +- allow_undefined_flag_F77= +- enable_shared_with_static_runtimes_F77=no +- archive_cmds_F77= +- archive_expsym_cmds_F77= +- old_archive_From_new_cmds_F77= +- old_archive_from_expsyms_cmds_F77= +- export_dynamic_flag_spec_F77= +- whole_archive_flag_spec_F77= +- thread_safe_flag_spec_F77= +- hardcode_libdir_flag_spec_F77= +- hardcode_libdir_flag_spec_ld_F77= +- hardcode_libdir_separator_F77= +- hardcode_direct_F77=no +- hardcode_minus_L_F77=no +- hardcode_shlibpath_var_F77=unsupported +- link_all_deplibs_F77=unknown +- hardcode_automatic_F77=no +- module_cmds_F77= +- module_expsym_cmds_F77= +- always_export_symbols_F77=no +- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- include_expsyms_F77= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_" +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- extract_expsyms_cmds= + +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac + +- ld_shlibs_F77=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix3* | aix4* | aix5*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- ld_shlibs_F77=no +- cat <&2 + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. + +-EOF +- fi +- ;; + +- amigaos*) +- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_minus_L_F77=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- ld_shlibs_F77=no +- ;; ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 ++$as_echo_n "checking how to hardcode library paths into programs... " >&6; } ++hardcode_action= ++if test -n "$hardcode_libdir_flag_spec" || ++ test -n "$runpath_var" || ++ test "X$hardcode_automatic" = "Xyes" ; then + +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag_F77=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; ++ # We can hardcode non-existent directories. ++ if test "$hardcode_direct" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && ++ test "$hardcode_minus_L" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action=unsupported ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 ++$as_echo "$hardcode_action" >&6; } + +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec_F77='-L$libdir' +- allow_undefined_flag_F77=unsupported +- always_export_symbols_F77=no +- enable_shared_with_static_runtimes_F77=yes +- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* $[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++if test "$hardcode_action" = relink || ++ test "$inherit_rpath" = yes; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi + +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- else +- ld_shlibs=no +- fi +- ;; + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; + +- solaris* | sysv5*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- ld_shlibs_F77=no +- cat <&2 + +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. + +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; + +- sunos4*) +- archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; ++ if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= + +- linux*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_cmds_F77="$tmp_archive_cmds" +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ +-cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ +-$echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- else +- archive_expsym_cmds_F77="$tmp_archive_cmds" +- fi +- else +- ld_shlibs_F77=no +- fi ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes + ;; + +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; +- esac ++ mingw* | pw32* | cegcc*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; + +- if test "$ld_shlibs_F77" = yes; then +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_F77='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec_F77= +- fi +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag_F77=unsupported +- always_export_symbols_F77=yes +- archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L_F77=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct_F77=unsupported +- fi +- ;; +- +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; + +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- esac ++ darwin*) ++ # if libdl is installed we need to link against it ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 ++$as_echo_n "checking for dlopen in -ldl... " >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_lib_dl_dlopen=yes ++else ++ ac_cv_lib_dl_dlopen=no ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 ++$as_echo "$ac_cv_lib_dl_dlopen" >&6; } ++if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes + +- archive_cmds_F77='' +- hardcode_direct_F77=yes +- hardcode_libdir_separator_F77=':' +- link_all_deplibs_F77=yes ++fi + +- if test "$GCC" = yes; then +- case $host_os in aix4.012|aix4.012.*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- hardcode_direct_F77=yes +- else +- # We have old collect2 +- hardcode_direct_F77=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L_F77=yes +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_libdir_separator_F77= +- fi +- esac +- shared_flag='-shared' +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi ++ ;; + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols_F77=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag_F77='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +- program main +- +- end +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ *) ++ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" ++if test "x$ac_cv_func_shl_load" = x""yes; then : ++ lt_cv_dlopen="shl_load" ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 ++$as_echo_n "checking for shl_load in -ldld... " >&6; } ++if test "${ac_cv_lib_dld_shl_load+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'`; fi ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_lib_dld_shl_load=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ac_cv_lib_dld_shl_load=no ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 ++$as_echo "$ac_cv_lib_dld_shl_load" >&6; } ++if test "x$ac_cv_lib_dld_shl_load" = x""yes; then : ++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" ++else ++ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" ++if test "x$ac_cv_func_dlopen" = x""yes; then : ++ lt_cv_dlopen="dlopen" ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 ++$as_echo_n "checking for dlopen in -ldl... " >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_lib_dl_dlopen=yes ++else ++ ac_cv_lib_dl_dlopen=no + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 ++$as_echo "$ac_cv_lib_dl_dlopen" >&6; } ++if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 ++$as_echo_n "checking for dlopen in -lsvld... " >&6; } ++if test "${ac_cv_lib_svld_dlopen+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsvld $LIBS" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag_F77="-z nodefs" +- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +- program main +- +- end +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_f77_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_lib_svld_dlopen=yes ++else ++ ac_cv_lib_svld_dlopen=no ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 ++$as_echo "$ac_cv_lib_svld_dlopen" >&6; } ++if test "x$ac_cv_lib_svld_dlopen" = x""yes; then : ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 ++$as_echo_n "checking for dld_link in -ldld... " >&6; } ++if test "${ac_cv_lib_dld_dld_link+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'`; fi ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dld_link (); ++int ++main () ++{ ++return dld_link (); ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_lib_dld_dld_link=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ac_cv_lib_dld_dld_link=no ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 ++$as_echo "$ac_cv_lib_dld_dld_link" >&6; } ++if test "x$ac_cv_lib_dld_dld_link" = x""yes; then : ++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" ++fi + -+ *) -+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no -+ ;; + + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag_F77=' ${wl}-bernotok' +- allow_undefined_flag_F77=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- always_export_symbols_F77=yes +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_F77=' ' +- archive_cmds_need_lc_F77=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; + +- amigaos*) +- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_minus_L_F77=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs_F77=no +- ;; ++fi + +- bsdi4*) +- export_dynamic_flag_spec_F77=-rdynamic +- ;; + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec_F77=' ' +- allow_undefined_flag_F77=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_From_new_cmds_F77='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes_F77=yes +- ;; ++fi + +- darwin* | rhapsody*) +- if test "$GXX" = yes ; then +- archive_cmds_need_lc_F77=no +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag_F77='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag_F77='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag_F77='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- allow_undefined_flag_F77='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_cmds_F77='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- archive_cmds_F77='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- module_cmds_F77='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- hardcode_direct_F77=no +- hardcode_automatic_F77=yes +- hardcode_shlibpath_var_F77=unsupported +- whole_archive_flag_spec_F77='-all_load $convenience' +- link_all_deplibs_F77=yes +- else +- ld_shlibs_F77=no +- fi +- ;; + +- dgux*) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_shlibpath_var_F77=no +- ;; ++fi + +- freebsd1*) +- ld_shlibs_F77=no +- ;; + +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; +- +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=yes +- hardcode_minus_L_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; ++fi + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu) +- archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; ++ ;; ++ esac + +- hpux9*) +- if test "$GCC" = yes; then +- archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- hardcode_direct_F77=yes ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_F77=yes +- export_dynamic_flag_spec_F77='${wl}-E' +- ;; ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + +- hpux10* | hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*|ia64*) +- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case "$host_cpu" in +- hppa*64*|ia64*) +- archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' +- ;; +- *) +- archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*) +- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' +- hardcode_libdir_flag_spec_ld_F77='+b $libdir' +- hardcode_libdir_separator_F77=: +- hardcode_direct_F77=no +- hardcode_shlibpath_var_F77=no +- ;; +- ia64*) +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_direct_F77=no +- hardcode_shlibpath_var_F77=no ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_F77=yes +- ;; +- *) +- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- hardcode_direct_F77=yes +- export_dynamic_flag_spec_F77='${wl}-E' ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_F77=yes +- ;; +- esac +- fi +- ;; ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 ++$as_echo_n "checking whether a program can dlopen itself... " >&6; } ++if test "${lt_cv_dlopen_self+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line 11276 "configure" ++#include "confdefs.h" + +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' +- fi +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- link_all_deplibs_F77=yes +- ;; ++#if HAVE_DLFCN_H ++#include ++#endif + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; ++#include + +- newsos6) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=yes +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- hardcode_shlibpath_var_F77=no +- ;; ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif + +- openbsd*) +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_F77='${wl}-E' +- else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_F77='-R$libdir' +- ;; +- *) +- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- ;; ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif + +- os2*) +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_minus_L_F77=yes +- allow_undefined_flag_F77=unsupported +- archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; + +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- allow_undefined_flag_F77=' -expect_unresolved \*' +- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- ;; ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' +- else +- allow_undefined_flag_F77=' -expect_unresolved \*' +- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' ++ return status; ++} ++_LT_EOF ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self=no + fi -+]) -+case $host_os in -+ # For platforms which do not support PIC, -DPIC is meaningless: -+ *djgpp*) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)= -+ ;; -+ *) -+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" -+ ;; -+esac -+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], -+ [How to pass a linker flag through the compiler]) -+ -+# -+# Check to make sure the PIC flag actually works. -+# -+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then -+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], -+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], -+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], -+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in -+ "" | " "*) ;; -+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; -+ esac], -+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)= -+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi -+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], -+ [Additional compiler flags for building library objects]) ++rm -fr conftest* + +- # Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec_F77='-rpath $libdir' +- fi +- hardcode_libdir_separator_F77=: +- ;; + +- sco3.2v5*) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_F77=no +- export_dynamic_flag_spec_F77='${wl}-Bexport' +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ;; ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 ++$as_echo "$lt_cv_dlopen_self" >&6; } + +- solaris*) +- no_undefined_flag_F77=' -z text' +- if test "$GCC" = yes; then +- archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_shlibpath_var_F77=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; +- esac +- link_all_deplibs_F77=yes +- ;; ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 ++$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } ++if test "${lt_cv_dlopen_self_static+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self_static=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line 11372 "configure" ++#include "confdefs.h" + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_direct_F77=yes +- hardcode_minus_L_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; ++#if HAVE_DLFCN_H ++#include ++#endif + +- sysv4) +- case $host_vendor in +- sni) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- reload_cmds_F77='$CC -r -o $output$reload_objs' +- hardcode_direct_F77=no +- ;; +- motorola) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var_F77=no +- ;; ++#include + +- sysv4.3*) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_F77=no +- export_dynamic_flag_spec_F77='-Bexport' +- ;; ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif + +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_F77=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs_F77=yes +- fi +- ;; ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif + +- sysv4.2uw2*) +- archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=yes +- hardcode_minus_L_F77=no +- hardcode_shlibpath_var_F77=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; + +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) +- no_undefined_flag_F77='${wl}-z ${wl}text' +- if test "$GCC" = yes; then +- archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var_F77=no +- ;; ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); + +- sysv5*) +- no_undefined_flag_F77=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec_F77= +- hardcode_shlibpath_var_F77=no +- runpath_var='LD_RUN_PATH' +- ;; +- +- uts4*) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_shlibpath_var_F77=no +- ;; +- +- *) +- ld_shlibs_F77=no +- ;; ++ return status; ++} ++_LT_EOF ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self_static=no + fi ++fi ++rm -fr conftest* + +-echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 +-echo "${ECHO_T}$ld_shlibs_F77" >&6 +-test "$ld_shlibs_F77" = no && can_build_shared=no + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 ++$as_echo "$lt_cv_dlopen_self_static" >&6; } ++ fi + +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc_F77" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc_F77=yes +- +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds_F77 in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 +- $rm conftest* +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl_F77 +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag_F77 +- allow_undefined_flag_F77= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc_F77=no +- else +- archive_cmds_need_lc_F77=yes +- fi +- allow_undefined_flag_F77=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6 +- ;; +- esac +- fi +- ;; +-esac ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac + +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +-if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +-else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac + fi +-need_lib_prefix=unknown +-hardcode_into_libs=no + +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown + +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH + +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; + +-aix4* | aix5*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; + +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; + +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; + +-bsdi4*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; + +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes + +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' +- ;; +- esac +- ;; + + -+# -+# Check to make sure the static flag actually works. -+# -+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" -+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], -+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), -+ $lt_tmp_static_flag, -+ [], -+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) -+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], -+ [Compiler flag to prevent dynamic linking]) -+])# _LT_COMPILER_PIC + + -+# _LT_LINKER_SHLIBS([TAGNAME]) -+# ---------------------------- -+# See if the linker supports building shared libraries. -+m4_defun([_LT_LINKER_SHLIBS], -+[AC_REQUIRE([LT_PATH_LD])dnl -+AC_REQUIRE([LT_PATH_NM])dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_DECL_EGREP])dnl -+m4_require([_LT_DECL_SED])dnl -+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -+m4_require([_LT_TAG_COMPILER])dnl -+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -+m4_if([$1], [CXX], [ -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -+ case $host_os in -+ aix[[4-9]]*) -+ # If we're using GNU nm, then we don't want the "-C" option. -+ # -C means demangle to AIX nm, but means don't demangle with GNU nm -+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ else -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ fi -+ ;; -+ pw32*) -+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" -+ ;; -+ cygwin* | mingw* | cegcc*) -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__$[[^ ]]*$[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' -+ ;; -+ linux* | k*bsd*-gnu) -+ _LT_TAGVAR(link_all_deplibs, $1)=no -+ ;; -+ *) -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -+ ;; -+ esac -+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] -+], [ -+ runpath_var= -+ _LT_TAGVAR(allow_undefined_flag, $1)= -+ _LT_TAGVAR(always_export_symbols, $1)=no -+ _LT_TAGVAR(archive_cmds, $1)= -+ _LT_TAGVAR(archive_expsym_cmds, $1)= -+ _LT_TAGVAR(compiler_needs_object, $1)=no -+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)= -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' -+ _LT_TAGVAR(hardcode_automatic, $1)=no -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -+ _LT_TAGVAR(hardcode_libdir_separator, $1)= -+ _LT_TAGVAR(hardcode_minus_L, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -+ _LT_TAGVAR(inherit_rpath, $1)=no -+ _LT_TAGVAR(link_all_deplibs, $1)=unknown -+ _LT_TAGVAR(module_cmds, $1)= -+ _LT_TAGVAR(module_expsym_cmds, $1)= -+ _LT_TAGVAR(old_archive_from_new_cmds, $1)= -+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= -+ _LT_TAGVAR(thread_safe_flag_spec, $1)= -+ _LT_TAGVAR(whole_archive_flag_spec, $1)= -+ # include_expsyms should be a list of space-separated symbols to be *always* -+ # included in the symbol list -+ _LT_TAGVAR(include_expsyms, $1)= -+ # exclude_expsyms can be an extended regexp of symbols to exclude -+ # it will be wrapped by ` (' and `)$', so one must not match beginning or -+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -+ # as well as any symbol that contains `d'. -+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] -+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -+ # platforms (ab)use it in PIC code, but their linkers get confused if -+ # the symbol is explicitly referenced. Since portable code cannot -+ # rely on this symbol name, it's probably fine to never include it in -+ # preloaded symbol tables. -+ # Exclude shared library initialization/finalization symbols. -+dnl Note also adjust exclude_expsyms for C++ above. -+ extract_expsyms_cmds= + -+ case $host_os in -+ cygwin* | mingw* | pw32* | cegcc*) -+ # FIXME: the MSVC++ port hasn't been tested in a loooong time -+ # When not using gcc, we currently assume that we are using -+ # Microsoft Visual C++. -+ if test "$GCC" != yes; then -+ with_gnu_ld=no -+ fi -+ ;; -+ interix*) -+ # we just hope/assume this is gcc and not c89 (= MSVC++) -+ with_gnu_ld=yes -+ ;; -+ openbsd*) -+ with_gnu_ld=no -+ ;; -+ linux* | k*bsd*-gnu) -+ _LT_TAGVAR(link_all_deplibs, $1)=no -+ ;; -+ esac + -+ _LT_TAGVAR(ld_shlibs, $1)=yes -+ if test "$with_gnu_ld" = yes; then -+ # If archive_cmds runs LD, not CC, wlarc should be empty -+ wlarc='${wl}' + -+ # Set some defaults for GNU ld with shared library support. These -+ # are reset later if shared libraries are not supported. Putting them -+ # here allows them to be overridden if necessary. -+ runpath_var=LD_RUN_PATH -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+ # ancient GNU ld didn't support --whole-archive et. al. -+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then -+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++striplib= ++old_striplib= ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 ++$as_echo_n "checking whether stripping libraries is possible... " >&6; } ++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } + else -+ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + fi -+ supports_anon_versioning=no -+ case `$LD -v 2>&1` in -+ *GNU\ gold*) supports_anon_versioning=yes ;; -+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 -+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... -+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... -+ *\ 2.11.*) ;; # other 2.11 versions -+ *) supports_anon_versioning=yes ;; -+ esac -+ -+ # See if GNU ld supports shared libraries. -+ case $host_os in -+ aix[[3-9]]*) -+ # On AIX/PPC, the GNU linker is very broken -+ if test "$host_cpu" != ia64; then -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ cat <<_LT_EOF 1>&2 -+ -+*** Warning: the GNU linker, at least up to release 2.9.1, is reported -+*** to be unable to reliably create shared libraries on AIX. -+*** Therefore, libtool is disabling shared libraries support. If you -+*** really care for shared libraries, you may want to modify your PATH -+*** so that a non-GNU linker is found, and then restart. -+ -+_LT_EOF -+ fi -+ ;; -+ -+ amigaos*) -+ case $host_cpu in -+ powerpc) -+ # see comment about AmigaOS4 .so support -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='' -+ ;; -+ m68k) -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ ;; -+ esac -+ ;; -+ -+ beos*) -+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ # Joseph Beckenbach says some releases of gcc -+ # support --undefined. This deserves some investigation. FIXME -+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ -+ cygwin* | mingw* | pw32* | cegcc*) -+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, -+ # as there is no search path for DLLs. -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ _LT_TAGVAR(always_export_symbols, $1)=no -+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' -+ -+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ # If the export-symbols file already is a .def file (1st line -+ # is EXPORTS), use it as is; otherwise, prepend... -+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ cp $export_symbols $output_objdir/$soname.def; -+ else -+ echo EXPORTS > $output_objdir/$soname.def; -+ cat $export_symbols >> $output_objdir/$soname.def; -+ fi~ -+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ -+ interix[[3-9]]*) -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. -+ # Instead, shared libraries are loaded at an image base (0x10000000 by -+ # default) and relocated if they conflict, which is a slow very memory -+ # consuming and fragmenting process. To avoid this, we pick a random, -+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link -+ # time. Moving up from 0x10000000 also allows more sbrk(2) space. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' -+ ;; -+ -+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) -+ tmp_diet=no -+ if test "$host_os" = linux-dietlibc; then -+ case $cc_basename in -+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) -+ esac -+ fi -+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ -+ && test "$tmp_diet" = no -+ then -+ tmp_addflag= -+ tmp_sharedflag='-shared' -+ case $cc_basename,$host_cpu in -+ pgcc*) # Portland Group C compiler -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ tmp_addflag=' $pic_flag' -+ ;; -+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ tmp_addflag=' $pic_flag -Mnomain' ;; -+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 -+ tmp_addflag=' -i_dynamic' ;; -+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 -+ tmp_addflag=' -i_dynamic -nofor_main' ;; -+ ifc* | ifort*) # Intel Fortran compiler -+ tmp_addflag=' -nofor_main' ;; -+ lf95*) # Lahey Fortran 8.1 -+ _LT_TAGVAR(whole_archive_flag_spec, $1)= -+ tmp_sharedflag='--shared' ;; -+ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) -+ tmp_sharedflag='-qmkshrobj' -+ tmp_addflag= ;; -+ esac -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) # Sun C 5.9 -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ _LT_TAGVAR(compiler_needs_object, $1)=yes -+ tmp_sharedflag='-G' ;; -+ *Sun\ F*) # Sun Fortran 8.3 -+ tmp_sharedflag='-G' ;; -+ esac -+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ -+ if test "x$supports_anon_versioning" = xyes; then -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ -+ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ -+ echo "local: *; };" >> $output_objdir/$libname.ver~ -+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' -+ fi -+ -+ case $cc_basename in -+ xlf*) -+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' -+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' -+ if test "x$supports_anon_versioning" = xyes; then -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ -+ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ -+ echo "local: *; };" >> $output_objdir/$libname.ver~ -+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' -+ fi -+ ;; -+ esac -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ -+ netbsd* | netbsdelf*-gnu) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' -+ wlarc= -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ fi -+ ;; -+ -+ solaris*) -+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ cat <<_LT_EOF 1>&2 -+ -+*** Warning: The releases 2.8.* of the GNU linker cannot reliably -+*** create shared libraries on Solaris systems. Therefore, libtool -+*** is disabling shared libraries support. We urge you to upgrade GNU -+*** binutils to release 2.9.1 or newer. Another option is to modify -+*** your PATH or compiler configuration so that the native linker is -+*** used, and then restart. -+ -+_LT_EOF -+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; ++ ;; + *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + ;; + esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; ++fi + +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' +- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. +- if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` +- else +- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' +- fi +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; + +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-freebsd1*) +- dynamic_linker=no +- ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; + +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.01* | freebsdelf3.01*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- *) # from 3.2 on +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- esac +- ;; + +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; + +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case "$host_cpu" in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; + +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; + +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; + +-# This must be Linux ELF. +-linux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes + +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 14785 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac + -+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) -+ case `$LD -v 2>&1` in -+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ cat <<_LT_EOF 1>&2 ++ # Report which library types will actually be built ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 ++$as_echo_n "checking if libtool supports shared libraries... " >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 ++$as_echo "$can_build_shared" >&6; } + -+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -+*** reliably create shared libraries on SCO systems. Therefore, libtool -+*** is disabling shared libraries support. We urge you to upgrade GNU -+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -+*** your PATH or compiler configuration so that the native linker is -+*** used, and then restart. ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 ++$as_echo_n "checking whether to build shared libraries... " >&6; } ++ test "$can_build_shared" = "no" && enable_shared=no + -+_LT_EOF -+ ;; -+ *) -+ # For security reasons, it is highly recommended that you always -+ # use absolute paths for naming shared libraries, and exclude the -+ # DT_RUNPATH tag from executables and libraries. But doing so -+ # requires that you compile everything twice, which is a pain. -+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ esac -+ ;; ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; + -+ sunos4*) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' -+ wlarc= -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; ++ aix[4-9]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no + fi +- rm -rf conftest* + ;; + esac ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 ++$as_echo "$enable_shared" >&6; } + +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" +- fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 ++$as_echo_n "checking whether to build static libraries... " >&6; } ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 ++$as_echo "$enable_static" >&6; } + +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; + +-knetbsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; + +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; + +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; ++fi ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; ++CC="$lt_save_CC" + +-openbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=yes +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; + +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; ++ac_ext=cpp ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; ++archive_cmds_need_lc_CXX=no ++allow_undefined_flag_CXX= ++always_export_symbols_CXX=no ++archive_expsym_cmds_CXX= ++compiler_needs_object_CXX=no ++export_dynamic_flag_spec_CXX= ++hardcode_direct_CXX=no ++hardcode_direct_absolute_CXX=no ++hardcode_libdir_flag_spec_CXX= ++hardcode_libdir_flag_spec_ld_CXX= ++hardcode_libdir_separator_CXX= ++hardcode_minus_L_CXX=no ++hardcode_shlibpath_var_CXX=unsupported ++hardcode_automatic_CXX=no ++inherit_rpath_CXX=no ++module_cmds_CXX= ++module_expsym_cmds_CXX= ++link_all_deplibs_CXX=unknown ++old_archive_cmds_CXX=$old_archive_cmds ++no_undefined_flag_CXX= ++whole_archive_flag_spec_CXX= ++enable_shared_with_static_runtimes_CXX=no + +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- ;; ++# Source file extension for C++ test sources. ++ac_ext=cpp + +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; ++# Object file extension for compiled C++ test sources. ++objext=o ++objext_CXX=$objext + +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; ++# No sense in running all these tests if we already determined that ++# the CXX compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_caught_CXX_error" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="int some_variable = 0;" + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; ++ # Code to be used in simple link tests ++ lt_simple_link_test_code='int main(int, char *[]) { return(0); }' + +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. + +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-*) +- dynamic_linker=no +- ;; +-esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 +-test "$dynamic_linker" = no && can_build_shared=no + +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +-hardcode_action_F77= +-if test -n "$hardcode_libdir_flag_spec_F77" || \ +- test -n "$runpath_var F77" || \ +- test "X$hardcode_automatic_F77"="Xyes" ; then + +- # We can hardcode non-existant directories. +- if test "$hardcode_direct_F77" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && +- test "$hardcode_minus_L_F77" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action_F77=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action_F77=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action_F77=unsupported +-fi +-echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 +-echo "${ECHO_T}$hardcode_action_F77" >&6 + +-if test "$hardcode_action_F77" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi + +-striplib= +-old_striplib= +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +- else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- ;; +- *) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +- ;; +- esac +-fi ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + ++# Allow CC to be a program name with arguments. ++compiler=$CC + +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_F77 \ +- CC_F77 \ +- LD_F77 \ +- lt_prog_compiler_wl_F77 \ +- lt_prog_compiler_pic_F77 \ +- lt_prog_compiler_static_F77 \ +- lt_prog_compiler_no_builtin_flag_F77 \ +- export_dynamic_flag_spec_F77 \ +- thread_safe_flag_spec_F77 \ +- whole_archive_flag_spec_F77 \ +- enable_shared_with_static_runtimes_F77 \ +- old_archive_cmds_F77 \ +- old_archive_from_new_cmds_F77 \ +- predep_objects_F77 \ +- postdep_objects_F77 \ +- predeps_F77 \ +- postdeps_F77 \ +- compiler_lib_search_path_F77 \ +- archive_cmds_F77 \ +- archive_expsym_cmds_F77 \ +- postinstall_cmds_F77 \ +- postuninstall_cmds_F77 \ +- old_archive_from_expsyms_cmds_F77 \ +- allow_undefined_flag_F77 \ +- no_undefined_flag_F77 \ +- export_symbols_cmds_F77 \ +- hardcode_libdir_flag_spec_F77 \ +- hardcode_libdir_flag_spec_ld_F77 \ +- hardcode_libdir_separator_F77 \ +- hardcode_automatic_F77 \ +- module_cmds_F77 \ +- module_expsym_cmds_F77 \ +- lt_cv_prog_compiler_c_o_F77 \ +- exclude_expsyms_F77 \ +- include_expsyms_F77; do +- +- case $var in +- old_archive_cmds_F77 | \ +- old_archive_from_new_cmds_F77 | \ +- archive_cmds_F77 | \ +- archive_expsym_cmds_F77 | \ +- module_cmds_F77 | \ +- module_expsym_cmds_F77 | \ +- old_archive_from_expsyms_cmds_F77 | \ +- export_symbols_cmds_F77 | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done + +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac ++ # save warnings/boilerplate of simple test code ++ ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$RM conftest* + +-cfgfile="$ofile" ++ ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$RM -r conftest* + -+ *) -+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ esac + -+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then -+ runpath_var= -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)= -+ _LT_TAGVAR(whole_archive_flag_spec, $1)= -+ fi ++ # Allow CC to be a program name with arguments. ++ lt_save_CC=$CC ++ lt_save_LD=$LD ++ lt_save_GCC=$GCC ++ GCC=$GXX ++ lt_save_with_gnu_ld=$with_gnu_ld ++ lt_save_path_LD=$lt_cv_path_LD ++ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then ++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else -+ # PORTME fill in a description of your system's linker (not GNU ld) -+ case $host_os in -+ aix3*) -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ _LT_TAGVAR(always_export_symbols, $1)=yes -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' -+ # Note: this linker hardcodes the directories in LIBPATH if there -+ # are no directories specified by -L. -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then -+ # Neither direct hardcoding nor static linking is supported with a -+ # broken collect2. -+ _LT_TAGVAR(hardcode_direct, $1)=unsupported -+ fi -+ ;; -+ -+ aix[[4-9]]*) -+ if test "$host_cpu" = ia64; then -+ # On IA64, the linker does run time linking by default, so we don't -+ # have to do anything special. -+ aix_use_runtimelinking=no -+ exp_sym_flag='-Bexport' -+ no_entry_flag="" -+ else -+ # If we're using GNU nm, then we don't want the "-C" option. -+ # -C means demangle to AIX nm, but means don't demangle with GNU nm -+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ else -+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' -+ fi -+ aix_use_runtimelinking=no -+ -+ # Test if we are trying to use run time linking or normal -+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we -+ # need to do runtime linking. -+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) -+ for ld_flag in $LDFLAGS; do -+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then -+ aix_use_runtimelinking=yes -+ break -+ fi -+ done -+ ;; -+ esac -+ -+ exp_sym_flag='-bexport' -+ no_entry_flag='-bnoentry' -+ fi -+ -+ # When large executables or shared objects are built, AIX ld can -+ # have problems creating the table of contents. If linking a library -+ # or program results in "error TOC overflow" add -mminimal-toc to -+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not -+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -+ -+ _LT_TAGVAR(archive_cmds, $1)='' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' ++ $as_unset lt_cv_prog_gnu_ld ++ fi ++ if test -n "${lt_cv_path_LDCXX+set}"; then ++ lt_cv_path_LD=$lt_cv_path_LDCXX ++ else ++ $as_unset lt_cv_path_LD ++ fi ++ test -z "${LDCXX+set}" || LD=$LDCXX ++ CC=${CXX-"c++"} ++ compiler=$CC ++ compiler_CXX=$CC ++ for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + -+ if test "$GCC" = yes; then -+ case $host_os in aix4.[[012]]|aix4.[[012]].*) -+ # We only want to do this on AIX 4.2 and lower, the check -+ # below for broken collect2 doesn't work under 4.3+ -+ collect2name=`${CC} -print-prog-name=collect2` -+ if test -f "$collect2name" && -+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null -+ then -+ # We have reworked collect2 -+ : -+ else -+ # We have old collect2 -+ _LT_TAGVAR(hardcode_direct, $1)=unsupported -+ # It fails to find uninstalled libraries when the uninstalled -+ # path is not listed in the libpath. Setting hardcode_minus_L -+ # to unsupported forces relinking -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)= -+ fi -+ ;; -+ esac -+ shared_flag='-shared' -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag="$shared_flag "'${wl}-G' -+ fi -+ _LT_TAGVAR(link_all_deplibs, $1)=no -+ else -+ # not using gcc -+ if test "$host_cpu" = ia64; then -+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release -+ # chokes on -Wl,-G. The following line is correct: -+ shared_flag='-G' -+ else -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag='${wl}-G' -+ else -+ shared_flag='${wl}-bM:SRE' -+ fi -+ fi -+ fi + -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' -+ # It seems that -bexpall does not export symbols beginning with -+ # underscore (_), so it is better to generate a list of symbols to export. -+ _LT_TAGVAR(always_export_symbols, $1)=yes -+ if test "$aix_use_runtimelinking" = yes; then -+ # Warning - without using the other runtime loading flags (-brtl), -+ # -berok will link without error, but may produce a broken library. -+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' -+ # Determine the default libpath from the value encoded in an -+ # empty executable. -+ _LT_SYS_MODULE_PATH_AIX -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" -+ else -+ if test "$host_cpu" = ia64; then -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' -+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" -+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" -+ else -+ # Determine the default libpath from the value encoded in an -+ # empty executable. -+ _LT_SYS_MODULE_PATH_AIX -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -+ # Warning - without using the other run time loading flags, -+ # -berok will link without error, but may produce a broken library. -+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' -+ # Exported symbols can be pulled into shared objects from archives -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes -+ # This is similar to how AIX traditionally builds its shared libraries. -+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -+ fi -+ fi ++ if test -n "$compiler"; then ++ # We don't want -fno-exception when compiling C++ code, so set the ++ # no_builtin_flag separately ++ if test "$GXX" = yes; then ++ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' ++ else ++ lt_prog_compiler_no_builtin_flag_CXX= ++ fi + +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname ++ if test "$GXX" = yes; then ++ # Set up default GNU C++ configuration + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared ++# Check whether --with-gnu-ld was given. ++if test "${with_gnu_ld+set}" = set; then : ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes ++else ++ with_gnu_ld=no ++fi + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 ++$as_echo_n "checking for ld used by $CC... " >&6; } ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [\\/]* | ?:[\\/]*) ++ re_direlt='/[^/][^/]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" + ;; -+ -+ amigaos*) -+ case $host_cpu in -+ powerpc) -+ # see comment about AmigaOS4 .so support -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='' -+ ;; -+ m68k) -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 ++$as_echo_n "checking for GNU ld... " >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 ++$as_echo_n "checking for non-GNU ld... " >&6; } ++fi ++if test "${lt_cv_path_LD+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &5 ++$as_echo "$LD" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 ++$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } ++if test "${lt_cv_prog_gnu_ld+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 &5 ++$as_echo "$lt_cv_prog_gnu_ld" >&6; } ++with_gnu_ld=$lt_cv_prog_gnu_ld + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install + +-# The host system. +-host_alias=$host_alias +-host=$host + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS + +-# A C compiler. +-LTCC=$lt_LTCC + +-# A language-specific compiler. +-CC=$lt_compiler_F77 ++ # Check if GNU C++ uses GNU ld as the underlying linker, since the ++ # archiving commands below assume that GNU ld is being used. ++ if test "$with_gnu_ld" = yes; then ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + -+ case $host_cpu in -+ hppa*64*|ia64*) -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ *) -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + -+ # hardcode_minus_L: Not really in the search PATH, -+ # but as the default location of the library. -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ ;; -+ esac -+ fi -+ ;; ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to ++ # investigate it a little bit more. (MM) ++ wlarc='${wl}' + -+ irix5* | irix6* | nonstopux*) -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ # Try to use the -exported_symbol ld option, if it does not -+ # work, assume that -exports_file does not work either and -+ # implicitly export all symbols. -+ save_LDFLAGS="$LDFLAGS" -+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" -+ AC_LINK_IFELSE(int foo(void) {}, -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' -+ ) -+ LDFLAGS="$save_LDFLAGS" ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if eval "`$CC -print-prog-name=ld` --help 2>&1" | ++ $GREP 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec_CXX= ++ fi + else -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ with_gnu_ld=no ++ wlarc= + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_F77 ++ # A generic and very simple default shared library creation ++ # command for GNU C++ for the case where it uses the native ++ # linker, instead of GNU ld. If possible, this setting should ++ # overridden to take advantage of the native linker features on ++ # the platform it is being used on. ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi -+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ _LT_TAGVAR(inherit_rpath, $1)=yes -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ ;; + +-# An ERE matcher. +-EGREP=$lt_EGREP ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + +-# The linker used to build libraries. +-LD=$lt_LD_F77 ++ else ++ GXX=no ++ with_gnu_ld=no ++ wlarc= ++ fi + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++ # PORTME: fill in a description of your system's C++ link characteristics ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ++ ld_shlibs_CXX=yes ++ case $host_os in ++ aix3*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ aix[4-9]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ aix_use_runtimelinking=no + +-# A BSD-compatible nm program. +-NM=$lt_NM ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) ++ for ld_flag in $LDFLAGS; do ++ case $ld_flag in ++ *-brtl*) ++ aix_use_runtimelinking=yes ++ break ++ ;; ++ esac ++ done ++ ;; ++ esac + +-# A symbol stripping program +-STRIP=$lt_STRIP ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + -+ netbsd* | netbsdelf*-gnu) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF -+ fi -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; ++ archive_cmds_CXX='' ++ hardcode_direct_CXX=yes ++ hardcode_direct_absolute_CXX=yes ++ hardcode_libdir_separator_CXX=':' ++ link_all_deplibs_CXX=yes ++ file_list_spec_CXX='${wl}-f,' + -+ newsos6) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; ++ if test "$GXX" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ hardcode_direct_CXX=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L_CXX=yes ++ hardcode_libdir_flag_spec_CXX='-L$libdir' ++ hardcode_libdir_separator_CXX= ++ fi ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" ++ export_dynamic_flag_spec_CXX='${wl}-bexpall' ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to ++ # export. ++ always_export_symbols_CXX=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag_CXX='-berok' ++ # Determine the default libpath from the value encoded in an empty ++ # executable. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" ++int ++main () ++{ + +-# Used on cygwin: assembler. +-AS="$AS" ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_cxx_try_link "$LINENO"; then : + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir +- +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$.*$$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_F77 ++ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + +-# Object file suffix (normally "o"). +-objext="$ac_objext" ++ archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag_CXX="-z nodefs" ++ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-# Old archive suffix (normally "a"). +-libext="$libext" ++int ++main () ++{ + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_cxx_try_link "$LINENO"; then : + +-# Executable file suffix (normally ""). +-exeext="$exeext" ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$.*$$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_F77 +-pic_mode=$pic_mode ++ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag_CXX=' ${wl}-bernotok' ++ allow_undefined_flag_CXX=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec_CXX='$convenience' ++ archive_cmds_need_lc_CXX=yes ++ # This is similar to how AIX traditionally builds its shared ++ # libraries. ++ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag_CXX=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs_CXX=no ++ fi ++ ;; + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 ++ chorus*) ++ case $cc_basename in ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; + +-# Must we lock files when doing compilation ? +-need_locks=$lt_need_locks ++ cygwin* | mingw* | pw32* | cegcc*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec_CXX='-L$libdir' ++ allow_undefined_flag_CXX=unsupported ++ always_export_symbols_CXX=no ++ enable_shared_with_static_runtimes_CXX=yes + -+ *nto* | *qnx*) -+ ;; ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ darwin* | rhapsody*) + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix + +-# Do we need a version for libraries? +-need_version=$need_version ++ archive_cmds_need_lc_CXX=no ++ hardcode_direct_CXX=no ++ hardcode_automatic_CXX=yes ++ hardcode_shlibpath_var_CXX=unsupported ++ whole_archive_flag_spec_CXX='' ++ link_all_deplibs_CXX=yes ++ allow_undefined_flag_CXX="$_lt_dar_allow_undefined" ++ case $cc_basename in ++ ifort*) _lt_dar_can_shared=yes ;; ++ *) _lt_dar_can_shared=$GCC ;; ++ esac ++ if test "$_lt_dar_can_shared" = "yes"; then ++ output_verbose_link_cmd=echo ++ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ if test "$lt_cv_apple_cc_single_mod" != "yes"; then ++ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" ++ archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" ++ fi + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen ++ else ++ ld_shlibs_CXX=no ++ fi + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self ++ ;; + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_F77 ++ freebsd[12]*) ++ # C++ shared libraries reported to be fairly broken before ++ # switch to ELF ++ ld_shlibs_CXX=no ++ ;; + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 ++ freebsd-elf*) ++ archive_cmds_need_lc_CXX=no ++ ;; + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 ++ freebsd* | dragonfly*) ++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF ++ # conventions ++ ld_shlibs_CXX=yes ++ ;; + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 ++ gnu*) ++ ;; + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 ++ hpux9*) ++ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ hardcode_direct_CXX=yes ++ hardcode_minus_L_CXX=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ aCC*) ++ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; + +-# Library versioning type. +-version_type=$version_type ++ hpux10*|hpux11*) ++ if test $with_gnu_ld = no; then ++ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec ++ case $host_cpu in ++ hppa*64*|ia64*) ++ ;; ++ *) ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ ;; ++ esac ++ fi ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_direct_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ ;; ++ *) ++ hardcode_direct_CXX=yes ++ hardcode_direct_absolute_CXX=yes ++ hardcode_minus_L_CXX=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ;; ++ esac + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test $with_gnu_ld = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ fi ++ else ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++ interix[3-9]*) ++ hardcode_direct_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ irix5* | irix6*) ++ case $cc_basename in ++ CC*) ++ # SGI C++ ++ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + -+ openbsd*) -+ if test -f /usr/libexec/ld.so; then -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ else -+ case $host_os in -+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ ;; -+ esac -+ fi -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; ++ # Archives containing C++ object files must be created using ++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test "$with_gnu_ld" = no; then ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' ++ fi ++ fi ++ link_all_deplibs_CXX=yes ++ ;; ++ esac ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ inherit_rpath_CXX=yes ++ ;; + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_F77 +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler + -+ os2*) -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' -+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' -+ ;; ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' + -+ osf3*) -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ else -+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ fi -+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ ;; ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + -+ osf4* | osf5*) # as osf3* with the addition of -msym flag -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ else -+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ -+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ++ ;; ++ icpc* | ecpc* ) ++ # Intel C++ ++ with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac ++ archive_cmds_need_lc_CXX=no ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ case `$CC -V` in ++ *pgCC\ [1-5]* | *pgcpp\ [1-5]*) ++ prelink_cmds_CXX='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ ++ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' ++ old_archive_cmds_CXX='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ ++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ ++ $RANLIB $oldlib' ++ archive_cmds_CXX='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ archive_expsym_cmds_CXX='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ *) # Version 6 will use weak symbols ++ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ esac + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 ++ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) ++ # Compaq C++ ++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec_CXX='-rpath $libdir' ++ hardcode_libdir_separator_CXX=: + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_F77 +-archive_expsym_cmds=$lt_archive_expsym_cmds_F77 +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ xl*) ++ # IBM XL 8.0 on PPC, with GNU ld ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ no_undefined_flag_CXX=' -zdefs' ++ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' ++ hardcode_libdir_flag_spec_CXX='-R$libdir' ++ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ compiler_needs_object_CXX=yes + -+ # Both c and cxx compiler support -rpath directly -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' -+ fi -+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ ;; ++ # Not sure whether something based on ++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 ++ # would be better. ++ output_verbose_link_cmd='echo' + -+ solaris*) -+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' -+ if test "$GCC" = yes; then -+ wlarc='${wl}' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' -+ else -+ case `$CC -V 2>&1` in -+ *"Compilers 5.0"*) -+ wlarc='' -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' -+ ;; -+ *) -+ wlarc='${wl}' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' -+ ;; ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ esac ++ ;; + esac -+ fi -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ case $host_os in -+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; -+ *) -+ # The compiler driver will combine and reorder linker options, -+ # but understands `-z linker_flag'. GCC discards it without `$wl', -+ # but is careful enough not to reorder. -+ # Supported since Solaris 2.6 (maybe 2.5.1?) -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' -+ else -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ ;; + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_F77 +-module_expsym_cmds=$lt_module_expsym_cmds_F77 ++ lynxos*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++ m88k*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_F77 +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_F77 +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_F77 +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_F77 ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; + +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_F77 ++ netbsd*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' ++ wlarc= ++ hardcode_libdir_flag_spec_CXX='-R$libdir' ++ hardcode_direct_CXX=yes ++ hardcode_shlibpath_var_CXX=no + fi ++ # Workaround some broken pre-1.5 toolchains ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; -+ esac -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ ;; -+ -+ sunos4*) -+ if test "x$host_vendor" = xsequent; then -+ # Use $CC to link under sequent, because it throws in some extra .o -+ # files that make .init and .fini sections work. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' -+ fi -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ sysv4) -+ case $host_vendor in -+ sni) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++ *nto* | *qnx*) ++ ld_shlibs_CXX=yes + ;; -+ siemens) -+ ## LD is ld it makes a PLAMLIB -+ ## CC just makes a GrossModule. -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ ;; -+ motorola) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ ld_shlibs_CXX=no + ;; -+ esac -+ runpath_var='LD_RUN_PATH' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ -+ sysv4.3*) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' -+ ;; -+ -+ sysv4*MP*) -+ if test -d /usr/nec; then -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ runpath_var=LD_RUN_PATH -+ hardcode_runpath_var=yes -+ _LT_TAGVAR(ld_shlibs, $1)=yes -+ fi -+ ;; -+ -+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) -+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ runpath_var='LD_RUN_PATH' -+ -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ fi -+ ;; + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_F77 ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct_CXX=yes ++ hardcode_shlibpath_var_CXX=no ++ hardcode_direct_absolute_CXX=yes ++ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ fi ++ output_verbose_link_cmd=echo ++ else ++ ld_shlibs_CXX=no ++ fi ++ ;; + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_F77 ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler + -+ sysv5* | sco3.2v5* | sco5v6*) -+ # Note: We can NOT use -z defs as we might desire, because we do not -+ # link with -lc, and that would cause any symbols used from libc to -+ # always be unresolved, which means just about no library would -+ # ever link correctly. If we're not using GNU ld we use -z text -+ # though, which does catch some bad symbols but isn't as heavy-handed -+ # as -z defs. -+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' -+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' -+ runpath_var='LD_RUN_PATH' ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$[^()0-9A-Za-z{}]$/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + -+ if test "$GCC" = yes; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ fi -+ ;; ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ hardcode_libdir_separator_CXX=: + -+ uts4*) -+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; ++ # Archives containing C++ object files must be created using ++ # the KAI C++ compiler. ++ case $host in ++ osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; ++ *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; ++ esac ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ cxx*) ++ case $host in ++ osf3*) ++ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ ;; ++ *) ++ allow_undefined_flag_CXX=' -expect_unresolved \*' ++ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ ++ echo "-hidden">> $lib.exp~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ ++ $RM $lib.exp' ++ hardcode_libdir_flag_spec_CXX='-rpath $libdir' ++ ;; ++ esac + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds ++ hardcode_libdir_separator_CXX=: + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' ++ case $host in ++ osf3*) ++ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ esac + -+ *) -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: + -+ if test x$host_vendor = xsni; then -+ case $host in -+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' -+ ;; -+ esac -+ fi -+ fi -+]) -+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + -+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld ++ else ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ psos*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ lcc*) ++ # Lucid ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ archive_cmds_need_lc_CXX=yes ++ no_undefined_flag_CXX=' -zdefs' ++ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + -+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl -+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl -+_LT_DECL([], [extract_expsyms_cmds], [2], -+ [The commands to extract the exported symbol list from a shared archive]) ++ hardcode_libdir_flag_spec_CXX='-R$libdir' ++ hardcode_shlibpath_var_CXX=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' ++ ;; ++ esac ++ link_all_deplibs_CXX=yes + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var ++ output_verbose_link_cmd='echo' + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ # The C++ compiler must be used to create the archive. ++ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ++ ;; ++ *) ++ # GNU C++ compiler with Solaris linker ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ no_undefined_flag_CXX=' ${wl}-z ${wl}defs' ++ if $CC --version | $GREP -v '^2\.7' > /dev/null; then ++ archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + -+# -+# Do we need to explicitly link libc? -+# -+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in -+x|xyes) -+ # Assume -lc should be added -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ else ++ # g++ 2.7 appears to require `-G' NOT `-shared' on this ++ # platform. ++ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + -+ if test "$enable_shared" = yes && test "$GCC" = yes; then -+ case $_LT_TAGVAR(archive_cmds, $1) in -+ *'~'*) -+ # FIXME: we may have to deal with multi-command sequences. -+ ;; -+ '$CC '*) -+ # Test whether the compiler implicitly links with -lc since on some -+ # systems, -lgcc has to come before -lc. If gcc already passes -lc -+ # to ld, don't add -lc before -lgcc. -+ AC_MSG_CHECKING([whether -lc should be explicitly linked in]) -+ $RM conftest* -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ fi + -+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then -+ soname=conftest -+ lib=conftest -+ libobjs=conftest.$ac_objext -+ deplibs= -+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) -+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) -+ compiler_flags=-v -+ linker_flags=-v -+ verstring= -+ output_objdir=. -+ libname=conftest -+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) -+ _LT_TAGVAR(allow_undefined_flag, $1)= -+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) -+ then -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ else -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes -+ fi -+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag -+ else -+ cat conftest.err 1>&5 -+ fi -+ $RM conftest* -+ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) ++ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ ;; + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_F77 ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag_CXX='${wl}-z,text' ++ archive_cmds_need_lc_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ runpath_var='LD_RUN_PATH' + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs ++ case $cc_basename in ++ CC*) ++ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag_CXX='${wl}-z,text' ++ allow_undefined_flag_CXX='${wl}-z,nodefs' ++ archive_cmds_need_lc_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' ++ hardcode_libdir_separator_CXX=':' ++ link_all_deplibs_CXX=yes ++ export_dynamic_flag_spec_CXX='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_F77 +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_F77 +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_F77 ++ case $cc_basename in ++ CC*) ++ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac + ;; + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_F77 ++ vxworks*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; + esac -+ fi -+ ;; -+esac -+ -+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], -+ [Whether or not to add -lc for building shared libraries]) -+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], -+ [enable_shared_with_static_runtimes], [0], -+ [Whether or not to disallow shared libs when runtime libs are static]) -+_LT_TAGDECL([], [export_dynamic_flag_spec], [1], -+ [Compiler flag to allow reflexive dlopens]) -+_LT_TAGDECL([], [whole_archive_flag_spec], [1], -+ [Compiler flag to generate shared objects directly from archives]) -+_LT_TAGDECL([], [compiler_needs_object], [1], -+ [Whether the compiler copes with passing no objects directly]) -+_LT_TAGDECL([], [old_archive_from_new_cmds], [2], -+ [Create an old-style archive from a shared archive]) -+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], -+ [Create a temporary old-style archive to link instead of a shared archive]) -+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) -+_LT_TAGDECL([], [archive_expsym_cmds], [2]) -+_LT_TAGDECL([], [module_cmds], [2], -+ [Commands used to build a loadable module if different from building -+ a shared archive.]) -+_LT_TAGDECL([], [module_expsym_cmds], [2]) -+_LT_TAGDECL([], [with_gnu_ld], [1], -+ [Whether we are building with GNU ld or not]) -+_LT_TAGDECL([], [allow_undefined_flag], [1], -+ [Flag that allows shared libraries with undefined symbols to be built]) -+_LT_TAGDECL([], [no_undefined_flag], [1], -+ [Flag that enforces no undefined symbols]) -+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], -+ [Flag to hardcode $libdir into a binary during linking. -+ This must work even if $libdir does not exist]) -+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], -+ [[If ld is used when linking, flag to hardcode $libdir into a binary -+ during linking. This must work even if $libdir does not exist]]) -+_LT_TAGDECL([], [hardcode_libdir_separator], [1], -+ [Whether we need a single "-rpath" flag with a separated argument]) -+_LT_TAGDECL([], [hardcode_direct], [0], -+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes -+ DIR into the resulting binary]) -+_LT_TAGDECL([], [hardcode_direct_absolute], [0], -+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes -+ DIR into the resulting binary and the resulting library dependency is -+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the -+ library is relocated]) -+_LT_TAGDECL([], [hardcode_minus_L], [0], -+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR -+ into the resulting binary]) -+_LT_TAGDECL([], [hardcode_shlibpath_var], [0], -+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -+ into the resulting binary]) -+_LT_TAGDECL([], [hardcode_automatic], [0], -+ [Set to "yes" if building a shared library automatically hardcodes DIR -+ into the library and all subsequent libraries and executables linked -+ against it]) -+_LT_TAGDECL([], [inherit_rpath], [0], -+ [Set to yes if linker adds runtime paths of dependent libraries -+ to runtime path list]) -+_LT_TAGDECL([], [link_all_deplibs], [0], -+ [Whether libtool must link a program against all its dependency libraries]) -+_LT_TAGDECL([], [fix_srcfile_path], [1], -+ [Fix the shell variable $srcfile for the compiler]) -+_LT_TAGDECL([], [always_export_symbols], [0], -+ [Set to "yes" if exported symbols are required]) -+_LT_TAGDECL([], [export_symbols_cmds], [2], -+ [The commands to list exported symbols]) -+_LT_TAGDECL([], [exclude_expsyms], [1], -+ [Symbols that should not be listed in the preloaded symbols]) -+_LT_TAGDECL([], [include_expsyms], [1], -+ [Symbols that must always be exported]) -+_LT_TAGDECL([], [prelink_cmds], [2], -+ [Commands necessary for linking programs (against libraries) with templates]) -+_LT_TAGDECL([], [file_list_spec], [1], -+ [Specify filename containing input files]) -+dnl FIXME: Not yet implemented -+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], -+dnl [Compiler flag to generate thread safe objects]) -+])# _LT_LINKER_SHLIBS -+ -+ -+# _LT_LANG_C_CONFIG([TAG]) -+# ------------------------ -+# Ensure that the configuration variables for a C compiler are suitably -+# defined. These variables are subsequently used by _LT_CONFIG to write -+# the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_C_CONFIG], -+[m4_require([_LT_DECL_EGREP])dnl -+lt_save_CC="$CC" -+AC_LANG_PUSH(C) -+ -+# Source file extension for C test sources. -+ac_ext=c -+ -+# Object file extension for compiled C test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext -+ -+# Code to be used in simple compile tests -+lt_simple_compile_test_code="int some_variable = 0;" + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 ++$as_echo "$ld_shlibs_CXX" >&6; } ++ test "$ld_shlibs_CXX" = no && can_build_shared=no + -+# Code to be used in simple link tests -+lt_simple_link_test_code='int main(){return(0);}' ++ GCC_CXX="$GXX" ++ LD_CXX="$LD" + -+_LT_TAG_COMPILER -+# Save the default compiler, since it gets overwritten when the other -+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -+compiler_DEFAULT=$CC ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ # Dependencies to place before and after the object being linked: ++predep_objects_CXX= ++postdep_objects_CXX= ++predeps_CXX= ++postdeps_CXX= ++compiler_lib_search_path_CXX= + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path_F77" ++cat > conftest.$ac_ext <<_LT_EOF ++class Foo ++{ ++public: ++ Foo (void) { a = 0; } ++private: ++ int a; ++}; ++_LT_EOF + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_F77 ++if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ # Parse the compiler output and extract the necessary ++ # objects, libraries and library flags. + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_F77 ++ # Sentinel used to keep track of whether or not we are before ++ # the conftest object file. ++ pre_test_object_deps_done=no + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ for p in `eval "$output_verbose_link_cmd"`; do ++ case $p in + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_F77 ++ -L* | -R* | -l*) ++ # Some compilers place space between "-{L,R}" and the path. ++ # Remove the space. ++ if test $p = "-L" || ++ test $p = "-R"; then ++ prev=$p ++ continue ++ else ++ prev= ++ fi + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_F77 ++ if test "$pre_test_object_deps_done" = no; then ++ case $p in ++ -L* | -R*) ++ # Internal compiler library paths should come after those ++ # provided the user. The postdeps already come after the ++ # user supplied libs so there is no need to process them. ++ if test -z "$compiler_lib_search_path_CXX"; then ++ compiler_lib_search_path_CXX="${prev}${p}" ++ else ++ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" ++ fi ++ ;; ++ # The "-l" case would never come before the object being ++ # linked, so don't bother handling this case. ++ esac ++ else ++ if test -z "$postdeps_CXX"; then ++ postdeps_CXX="${prev}${p}" ++ else ++ postdeps_CXX="${postdeps_CXX} ${prev}${p}" ++ fi ++ fi ++ ;; + -+# save warnings/boilerplate of simple test code -+_LT_COMPILER_BOILERPLATE -+_LT_LINKER_BOILERPLATE ++ *.$objext) ++ # This assumes that the test object file only shows up ++ # once in the compiler output. ++ if test "$p" = "conftest.$objext"; then ++ pre_test_object_deps_done=yes ++ continue ++ fi + +-# ### END LIBTOOL TAG CONFIG: $tagname ++ if test "$pre_test_object_deps_done" = no; then ++ if test -z "$predep_objects_CXX"; then ++ predep_objects_CXX="$p" ++ else ++ predep_objects_CXX="$predep_objects_CXX $p" ++ fi ++ else ++ if test -z "$postdep_objects_CXX"; then ++ postdep_objects_CXX="$p" ++ else ++ postdep_objects_CXX="$postdep_objects_CXX $p" ++ fi ++ fi ++ ;; + +-__EOF__ ++ *) ;; # Ignore the rest. + ++ esac ++ done + ++ # Clean up. ++ rm -f a.out a.exe + else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi ++ echo "libtool.m4: error: problem compiling CXX test program" + fi + ++$RM -f confest.$objext + -+## CAVEAT EMPTOR: -+## There is no encapsulation within the following macros, do not change -+## the running order or otherwise move them around unless you know exactly -+## what you are doing... -+if test -n "$compiler"; then -+ _LT_COMPILER_NO_RTTI($1) -+ _LT_COMPILER_PIC($1) -+ _LT_COMPILER_C_O($1) -+ _LT_COMPILER_FILE_LOCKS($1) -+ _LT_LINKER_SHLIBS($1) -+ _LT_SYS_DYNAMIC_LINKER($1) -+ _LT_LINKER_HARDCODE_LIBPATH($1) -+ LT_SYS_DLOPEN_SELF -+ _LT_CMD_STRIPLIB ++# PORTME: override above test on systems where it is broken ++case $host_os in ++interix[3-9]*) ++ # Interix 3.5 installs completely hosed .la files for C++, so rather than ++ # hack all around it, let's just trust "g++" to DTRT. ++ predep_objects_CXX= ++ postdep_objects_CXX= ++ postdeps_CXX= ++ ;; + -+ # Report which library types will actually be built -+ AC_MSG_CHECKING([if libtool supports shared libraries]) -+ AC_MSG_RESULT([$can_build_shared]) ++linux*) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 + -+ AC_MSG_CHECKING([whether to build shared libraries]) -+ test "$can_build_shared" = "no" && enable_shared=no ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac + -+ # On AIX, shared libraries and static libraries use the same namespace, and -+ # are all built from PIC. -+ case $host_os in -+ aix3*) -+ test "$enable_shared" = yes && enable_static=no -+ if test -n "$RANLIB"; then -+ archive_cmds="$archive_cmds~\$RANLIB \$lib" -+ postinstall_cmds='$RANLIB $lib' ++ if test "$solaris_use_stlport4" != yes; then ++ postdeps_CXX='-library=Cstd -library=Crun' + fi + ;; ++ esac ++ ;; + -+ aix[[4-9]]*) -+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then -+ test "$enable_shared" = yes && enable_static=no ++solaris*) ++ case $cc_basename in ++ CC*) ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac ++ ++ # Adding this requires a known-good setup of shared libraries for ++ # Sun compiler versions before 5.6, else PIC objects from an old ++ # archive will be linked into the output, leading to subtle bugs. ++ if test "$solaris_use_stlport4" != yes; then ++ postdeps_CXX='-library=Cstd -library=Crun' + fi + ;; + esac -+ AC_MSG_RESULT([$enable_shared]) -+ -+ AC_MSG_CHECKING([whether to build static libraries]) -+ # Make sure either enable_shared or enable_static is yes. -+ test "$enable_shared" = yes || enable_static=yes -+ AC_MSG_RESULT([$enable_static]) -+ -+ _LT_CONFIG($1) -+fi -+AC_LANG_POP -+CC="$lt_save_CC" -+])# _LT_LANG_C_CONFIG ++ ;; ++esac + + -+# _LT_PROG_CXX -+# ------------ -+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ -+# compiler, we have our own version here. -+m4_defun([_LT_PROG_CXX], -+[ -+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) -+AC_PROG_CXX -+if test -n "$CXX" && ( test "X$CXX" != "Xno" && -+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || -+ (test "X$CXX" != "Xg++"))) ; then -+ AC_PROG_CXXCPP -+else -+ _lt_caught_CXX_error=yes ++case " $postdeps_CXX " in ++*" -lc "*) archive_cmds_need_lc_CXX=no ;; ++esac ++ compiler_lib_search_dirs_CXX= ++if test -n "${compiler_lib_search_path_CXX}"; then ++ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi -+popdef([AC_MSG_ERROR]) -+])# _LT_PROG_CXX -+ -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([_LT_PROG_CXX], []) -+ -+ -+# _LT_LANG_CXX_CONFIG([TAG]) -+# -------------------------- -+# Ensure that the configuration variables for a C++ compiler are suitably -+# defined. These variables are subsequently used by _LT_CONFIG to write -+# the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_CXX_CONFIG], -+[AC_REQUIRE([_LT_PROG_CXX])dnl -+m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+m4_require([_LT_DECL_EGREP])dnl -+ -+AC_LANG_PUSH(C++) -+_LT_TAGVAR(archive_cmds_need_lc, $1)=no -+_LT_TAGVAR(allow_undefined_flag, $1)= -+_LT_TAGVAR(always_export_symbols, $1)=no -+_LT_TAGVAR(archive_expsym_cmds, $1)= -+_LT_TAGVAR(compiler_needs_object, $1)=no -+_LT_TAGVAR(export_dynamic_flag_spec, $1)= -+_LT_TAGVAR(hardcode_direct, $1)=no -+_LT_TAGVAR(hardcode_direct_absolute, $1)=no -+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -+_LT_TAGVAR(hardcode_libdir_separator, $1)= -+_LT_TAGVAR(hardcode_minus_L, $1)=no -+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -+_LT_TAGVAR(hardcode_automatic, $1)=no -+_LT_TAGVAR(inherit_rpath, $1)=no -+_LT_TAGVAR(module_cmds, $1)= -+_LT_TAGVAR(module_expsym_cmds, $1)= -+_LT_TAGVAR(link_all_deplibs, $1)=unknown -+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -+_LT_TAGVAR(no_undefined_flag, $1)= -+_LT_TAGVAR(whole_archive_flag_spec, $1)= -+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no -+ -+# Source file extension for C++ test sources. -+ac_ext=cpp -+ -+# Object file extension for compiled C++ test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext -+ -+# No sense in running all these tests if we already determined that -+# the CXX compiler isn't working. Some variables (like enable_shared) -+# are currently assumed to apply to all compilers on this platform, -+# and will be corrupted by setting them based on a non-working compiler. -+if test "$_lt_caught_CXX_error" != yes; then -+ # Code to be used in simple compile tests -+ lt_simple_compile_test_code="int some_variable = 0;" -+ -+ # Code to be used in simple link tests -+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' -+ -+ # ltmain only uses $CC for tagged configurations so make sure $CC is set. -+ _LT_TAG_COMPILER -+ -+ # save warnings/boilerplate of simple test code -+ _LT_COMPILER_BOILERPLATE -+ _LT_LINKER_BOILERPLATE -+ -+ # Allow CC to be a program name with arguments. -+ lt_save_CC=$CC -+ lt_save_LD=$LD -+ lt_save_GCC=$GCC -+ GCC=$GXX -+ lt_save_with_gnu_ld=$with_gnu_ld -+ lt_save_path_LD=$lt_cv_path_LD -+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then -+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx -+ else -+ $as_unset lt_cv_prog_gnu_ld -+ fi -+ if test -n "${lt_cv_path_LDCXX+set}"; then -+ lt_cv_path_LD=$lt_cv_path_LDCXX -+ else -+ $as_unset lt_cv_path_LD -+ fi -+ test -z "${LDCXX+set}" || LD=$LDCXX -+ CC=${CXX-"c++"} -+ compiler=$CC -+ _LT_TAGVAR(compiler, $1)=$CC -+ _LT_CC_BASENAME([$compiler]) -+ -+ if test -n "$compiler"; then -+ # We don't want -fno-exception when compiling C++ code, so set the -+ # no_builtin_flag separately -+ if test "$GXX" = yes; then -+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -+ else -+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -+ fi -+ -+ if test "$GXX" = yes; then -+ # Set up default GNU C++ configuration -+ -+ LT_PATH_LD -+ -+ # Check if GNU C++ uses GNU ld as the underlying linker, since the -+ # archiving commands below assume that GNU ld is being used. -+ if test "$with_gnu_ld" = yes; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+ -+ # If archive_cmds runs LD, not CC, wlarc should be empty -+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to -+ # investigate it a little bit more. (MM) -+ wlarc='${wl}' -+ -+ # ancient GNU ld didn't support --whole-archive et. al. -+ if eval "`$CC -print-prog-name=ld` --help 2>&1" | -+ $GREP 'no-whole-archive' > /dev/null; then -+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -+ else -+ _LT_TAGVAR(whole_archive_flag_spec, $1)= -+ fi -+ else -+ with_gnu_ld=no -+ wlarc= -+ -+ # A generic and very simple default shared library creation -+ # command for GNU C++ for the case where it uses the native -+ # linker, instead of GNU ld. If possible, this setting should -+ # overridden to take advantage of the native linker features on -+ # the platform it is being used on. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' -+ fi -+ -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ -+ else -+ GXX=no -+ with_gnu_ld=no -+ wlarc= -+ fi -+ -+ # PORTME: fill in a description of your system's C++ link characteristics -+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -+ _LT_TAGVAR(ld_shlibs, $1)=yes -+ case $host_os in -+ aix3*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ aix[[4-9]]*) -+ if test "$host_cpu" = ia64; then -+ # On IA64, the linker does run time linking by default, so we don't -+ # have to do anything special. -+ aix_use_runtimelinking=no -+ exp_sym_flag='-Bexport' -+ no_entry_flag="" -+ else -+ aix_use_runtimelinking=no -+ -+ # Test if we are trying to use run time linking or normal -+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we -+ # need to do runtime linking. -+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) -+ for ld_flag in $LDFLAGS; do -+ case $ld_flag in -+ *-brtl*) -+ aix_use_runtimelinking=yes -+ break -+ ;; -+ esac -+ done -+ ;; -+ esac + -+ exp_sym_flag='-bexport' -+ no_entry_flag='-bnoentry' -+ fi + -+ # When large executables or shared objects are built, AIX ld can -+ # have problems creating the table of contents. If linking a library -+ # or program results in "error TOC overflow" add -mminimal-toc to -+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not -+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + -+ _LT_TAGVAR(archive_cmds, $1)='' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-CC="$lt_save_CC" + +- else +- tagname="" +- fi +- ;; + +- GCJ) +- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + + + +-# Source file extension for Java test sources. +-ac_ext=java + +-# Object file extension for compiled Java test sources. +-objext=o +-objext_GCJ=$objext + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="class foo {}\n" + +-# Code to be used in simple link tests +-lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }\n' + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} + +-# Allow CC to be a program name with arguments. +-compiler=$CC + + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${GCJ-"gcj"} +-compiler=$CC +-compiler_GCJ=$CC + +-# GCJ did not exist at the time GCC didn't implicitly link libc in. +-archive_cmds_need_lc_GCJ=no + + +-lt_prog_compiler_no_builtin_flag_GCJ= + +-if test "$GCC" = yes; then +- lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' + + +-echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 +-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_prog_compiler_rtti_exceptions=no +- ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="-fno-rtti -fno-exceptions" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:15526: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:15530: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then +- lt_cv_prog_compiler_rtti_exceptions=yes +- fi +- fi +- $rm conftest* + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 + +-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then +- lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" +-else +- : +-fi + +-fi + +-lt_prog_compiler_wl_GCJ= +-lt_prog_compiler_pic_GCJ= +-lt_prog_compiler_static_GCJ= + +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 + +- if test "$GCC" = yes; then +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_static_GCJ='-static' + -+ if test "$GXX" = yes; then -+ case $host_os in aix4.[[012]]|aix4.[[012]].*) -+ # We only want to do this on AIX 4.2 and lower, the check -+ # below for broken collect2 doesn't work under 4.3+ -+ collect2name=`${CC} -print-prog-name=collect2` -+ if test -f "$collect2name" && -+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null -+ then -+ # We have reworked collect2 -+ : -+ else -+ # We have old collect2 -+ _LT_TAGVAR(hardcode_direct, $1)=unsupported -+ # It fails to find uninstalled libraries when the uninstalled -+ # path is not listed in the libpath. Setting hardcode_minus_L -+ # to unsupported forces relinking -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)= -+ fi -+ esac -+ shared_flag='-shared' -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag="$shared_flag "'${wl}-G' -+ fi -+ else -+ # not using gcc -+ if test "$host_cpu" = ia64; then -+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release -+ # chokes on -Wl,-G. The following line is correct: -+ shared_flag='-G' -+ else -+ if test "$aix_use_runtimelinking" = yes; then -+ shared_flag='${wl}-G' -+ else -+ shared_flag='${wl}-bM:SRE' -+ fi -+ fi -+ fi ++ lt_prog_compiler_wl_CXX= ++lt_prog_compiler_pic_CXX= ++lt_prog_compiler_static_CXX= + -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' -+ # It seems that -bexpall does not export symbols beginning with -+ # underscore (_), so it is better to generate a list of symbols to -+ # export. -+ _LT_TAGVAR(always_export_symbols, $1)=yes -+ if test "$aix_use_runtimelinking" = yes; then -+ # Warning - without using the other runtime loading flags (-brtl), -+ # -berok will link without error, but may produce a broken library. -+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' -+ # Determine the default libpath from the value encoded in an empty -+ # executable. -+ _LT_SYS_MODULE_PATH_AIX -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 ++$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" -+ else -+ if test "$host_cpu" = ia64; then -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' -+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" -+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" -+ else -+ # Determine the default libpath from the value encoded in an -+ # empty executable. -+ _LT_SYS_MODULE_PATH_AIX -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" -+ # Warning - without using the other run time loading flags, -+ # -berok will link without error, but may produce a broken library. -+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' -+ # Exported symbols can be pulled into shared objects from archives -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes -+ # This is similar to how AIX traditionally builds its shared -+ # libraries. -+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' -+ fi -+ fi ++ # C++ specific cases for pic, static, wl, etc. ++ if test "$GXX" = yes; then ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='-static' + + case $host_os in +- aix*) ++ aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_GCJ='-Bstatic' ++ lt_prog_compiler_static_CXX='-Bstatic' + fi + ;; + + amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ lt_prog_compiler_pic_CXX='-fPIC' + ;; -+ -+ beos*) -+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ # Joseph Beckenbach says some releases of gcc -+ # support --undefined. This deserves some investigation. FIXME -+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac + ;; + +- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; +- +- mingw* | pw32* | os2*) ++ mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; +- + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic_GCJ='-fno-common' ++ lt_prog_compiler_pic_CXX='-fno-common' + ;; +- +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- lt_prog_compiler_can_build_shared_GCJ=no +- enable_shared=no ++ *djgpp*) ++ # DJGPP does not support shared libraries at all ++ lt_prog_compiler_pic_CXX= ++ ;; ++ interix[3-9]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. + ;; +- + sysv4*MP*) + if test -d /usr/nec; then +- lt_prog_compiler_pic_GCJ=-Kconform_pic ++ lt_prog_compiler_pic_CXX=-Kconform_pic + fi + ;; +- + hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case "$host_cpu" in +- hppa*64*|ia64*) +- # +Z the default ++ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit ++ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag ++ # sets the default TLS model and affects inlining. ++ case $host_cpu in ++ hppa*64*) + ;; + *) +- lt_prog_compiler_pic_GCJ='-fPIC' ++ lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + ;; +- ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic_CXX='-fPIC -shared' ++ ;; + *) +- lt_prog_compiler_pic_GCJ='-fPIC' ++ lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + else +- # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in +- aix*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_GCJ='-Bstatic' +- else +- lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- +- mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' +- ;; +- +- hpux9* | hpux10* | hpux11*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case "$host_cpu" in +- hppa*64*|ia64*) +- # +Z the default ++ aix[4-9]*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_CXX='-Bstatic' + else -+ _LT_TAGVAR(ld_shlibs, $1)=no ++ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' + fi -+ ;; -+ + ;; +- *) +- lt_prog_compiler_pic_GCJ='+Z' + chorus*) -+ case $cc_basename in -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no ++ case $cc_basename in ++ cxch68*) ++ # Green Hills C++ Compiler ++ # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; -+ esac -+ ;; -+ -+ cygwin* | mingw* | pw32* | cegcc*) -+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, -+ # as there is no search path for DLLs. -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' -+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported -+ _LT_TAGVAR(always_export_symbols, $1)=no -+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes -+ -+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ # If the export-symbols file already is a .def file (1st line -+ # is EXPORTS), use it as is; otherwise, prepend... -+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then -+ cp $export_symbols $output_objdir/$soname.def; -+ else -+ echo EXPORTS > $output_objdir/$soname.def; -+ cat $export_symbols >> $output_objdir/$soname.def; -+ fi~ -+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ darwin* | rhapsody*) -+ _LT_DARWIN_LINKER_FEATURES($1) -+ ;; -+ ++ esac + ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' +- ;; +- +- irix5* | irix6* | nonstopux*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # PIC (with -KPIC) is the default. +- lt_prog_compiler_static_GCJ='-non_shared' +- ;; +- +- newsos6) +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; +- +- linux*) +- case $CC in +- icc* | ecc*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-static' +- ;; +- ccc*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # All Alpha code is PIC. +- lt_prog_compiler_static_GCJ='-non_shared' + dgux*) -+ case $cc_basename in -+ ec++*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no ++ case $cc_basename in ++ ec++*) ++ lt_prog_compiler_pic_CXX='-KPIC' ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ lt_prog_compiler_pic_CXX='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ freebsd* | dragonfly*) ++ # FreeBSD uses GNU C++ ++ ;; ++ hpux9* | hpux10* | hpux11*) ++ case $cc_basename in ++ CC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' ++ if test "$host_cpu" != ia64; then ++ lt_prog_compiler_pic_CXX='+Z' ++ fi ++ ;; ++ aCC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic_CXX='+Z' ++ ;; ++ esac ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? ++ ;; ++ irix5* | irix6* | nonstopux*) ++ case $cc_basename in ++ CC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='-non_shared' ++ # CC pic flag -KPIC is the default. ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ KCC*) ++ # KAI C++ Compiler ++ lt_prog_compiler_wl_CXX='--backend -Wl,' ++ lt_prog_compiler_pic_CXX='-fPIC' ++ ;; ++ ecpc* ) ++ # old Intel C++ for x86_64 which still supported -KPIC. ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-static' ++ ;; ++ icpc* ) ++ # Intel C++, used to be incompatible with GCC. ++ # ICC 10 doesn't accept -KPIC any more. ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-fPIC' ++ lt_prog_compiler_static_CXX='-static' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-fpic' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ ;; ++ cxx*) ++ # Compaq C++ ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ lt_prog_compiler_pic_CXX= ++ lt_prog_compiler_static_CXX='-non_shared' ++ ;; ++ xlc* | xlC*) ++ # IBM XL 8.0 on PPC ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-qpic' ++ lt_prog_compiler_static_CXX='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ lt_prog_compiler_wl_CXX='-Qoption ld ' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ lynxos*) ++ ;; ++ m88k*) ++ ;; ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ lt_prog_compiler_pic_CXX='-W c,exportall' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ ;; ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic_CXX='-fPIC -shared' + ;; +- esac +- ;; +- +- osf3* | osf4* | osf5*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # All OSF/1 code is PIC. +- lt_prog_compiler_static_GCJ='-non_shared' +- ;; +- +- sco3.2v5*) +- lt_prog_compiler_pic_GCJ='-Kpic' +- lt_prog_compiler_static_GCJ='-dn' +- ;; +- +- solaris*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; +- +- sunos4*) +- lt_prog_compiler_wl_GCJ='-Qoption ld ' +- lt_prog_compiler_pic_GCJ='-PIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; +- +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; +- +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_prog_compiler_pic_GCJ='-Kconform_pic' +- lt_prog_compiler_static_GCJ='-Bstatic' +- fi +- ;; +- +- uts4*) +- lt_prog_compiler_pic_GCJ='-pic' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; +- +- *) +- lt_prog_compiler_can_build_shared_GCJ=no +- ;; ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ lt_prog_compiler_wl_CXX='--backend -Wl,' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ lt_prog_compiler_pic_CXX='-pic' ++ ;; ++ cxx*) ++ # Digital/Compaq C++ ++ lt_prog_compiler_wl_CXX='-Wl,' ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ lt_prog_compiler_pic_CXX= ++ lt_prog_compiler_static_CXX='-non_shared' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ psos*) ++ ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; -+ ghcx*) ++ gcx*) + # Green Hills C++ Compiler -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no ++ lt_prog_compiler_pic_CXX='-PIC' + ;; -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no ++ *) + ;; -+ esac -+ ;; -+ -+ freebsd[[12]]*) -+ # C++ shared libraries reported to be fairly broken before -+ # switch to ELF -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ -+ freebsd-elf*) -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ ;; -+ -+ freebsd* | dragonfly*) -+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF -+ # conventions -+ _LT_TAGVAR(ld_shlibs, $1)=yes -+ ;; -+ -+ gnu*) -+ ;; -+ -+ hpux9*) -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, -+ # but as the default -+ # location of the library. -+ -+ case $cc_basename in -+ CC*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ aCC*) -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ ;; -+ *) -+ if test "$GXX" = yes; then -+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' -+ else -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ esac -+ ;; -+ -+ hpux10*|hpux11*) -+ if test $with_gnu_ld = no; then -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ -+ case $host_cpu in -+ hppa*64*|ia64*) -+ ;; -+ *) -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ ;; -+ esac -+ fi -+ case $host_cpu in -+ hppa*64*|ia64*) -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ ;; -+ *) -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, -+ # but as the default -+ # location of the library. -+ ;; -+ esac -+ -+ case $cc_basename in -+ CC*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no ++ esac ++ ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ lt_prog_compiler_pic_CXX='-pic' ++ lt_prog_compiler_static_CXX='-Bstatic' + ;; -+ aCC*) -+ case $host_cpu in -+ hppa*64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ ia64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ esac -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ lcc*) ++ # Lucid ++ lt_prog_compiler_pic_CXX='-pic' + ;; -+ *) -+ if test "$GXX" = yes; then -+ if test $with_gnu_ld = no; then -+ case $host_cpu in -+ hppa*64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ ia64*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ ;; -+ esac -+ fi -+ else -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi ++ *) + ;; -+ esac -+ ;; -+ -+ interix[[3-9]]*) -+ _LT_TAGVAR(hardcode_direct, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. -+ # Instead, shared libraries are loaded at an image base (0x10000000 by -+ # default) and relocated if they conflict, which is a slow very memory -+ # consuming and fragmenting process. To avoid this, we pick a random, -+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link -+ # time. Moving up from 0x10000000 also allows more sbrk(2) space. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ esac + ;; -+ irix5* | irix6*) -+ case $cc_basename in -+ CC*) -+ # SGI C++ -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ ;; ++ esac ++ ;; ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ lt_prog_compiler_pic_CXX='-KPIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ vxworks*) ++ ;; ++ *) ++ lt_prog_compiler_can_build_shared_CXX=no ++ ;; + esac + fi + +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6 +- +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic_GCJ"; then +- +-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6 +-if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_prog_compiler_pic_works_GCJ=no +- ac_outfile=conftest.$ac_objext +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic_GCJ" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:15759: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:15763: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then +- lt_prog_compiler_pic_works_GCJ=yes +- fi +- fi +- $rm conftest* +- +-fi +-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 +-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6 +- +-if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then +- case $lt_prog_compiler_pic_GCJ in +- "" | " "*) ;; +- *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; +- esac +-else +- lt_prog_compiler_pic_GCJ= +- lt_prog_compiler_can_build_shared_GCJ=no +-fi +- +-fi +-case "$host_os" in ++case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) +- lt_prog_compiler_pic_GCJ= ++ lt_prog_compiler_pic_CXX= + ;; + *) +- lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" ++ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" + ;; + esac ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5 ++$as_echo "$lt_prog_compiler_pic_CXX" >&6; } + +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_prog_compiler_c_o_GCJ=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext + +- lt_compiler_flag="-o out/conftest2.$ac_objext" ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic_CXX"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 ++$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } ++if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_pic_works_CXX=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:15819: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) ++ (eval echo "\"\$as_me:13328: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) + ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:15823: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then ++ cat conftest.err >&5 ++ echo "$as_me:13332: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s out/conftest.err; then +- lt_cv_prog_compiler_c_o_GCJ=yes ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_pic_works_CXX=yes + fi + fi +- chmod u+w . +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* ++ $RM conftest* + + fi +-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 +-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 ++$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } + +- +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 +- if test "$hard_links" = no; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn +- fi +-else +- need_locks=no +-fi +- +-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 +- +- runpath_var= +- allow_undefined_flag_GCJ= +- enable_shared_with_static_runtimes_GCJ=no +- archive_cmds_GCJ= +- archive_expsym_cmds_GCJ= +- old_archive_From_new_cmds_GCJ= +- old_archive_from_expsyms_cmds_GCJ= +- export_dynamic_flag_spec_GCJ= +- whole_archive_flag_spec_GCJ= +- thread_safe_flag_spec_GCJ= +- hardcode_libdir_flag_spec_GCJ= +- hardcode_libdir_flag_spec_ld_GCJ= +- hardcode_libdir_separator_GCJ= +- hardcode_direct_GCJ=no +- hardcode_minus_L_GCJ=no +- hardcode_shlibpath_var_GCJ=unsupported +- link_all_deplibs_GCJ=unknown +- hardcode_automatic_GCJ=no +- module_cmds_GCJ= +- module_expsym_cmds_GCJ= +- always_export_symbols_GCJ=no +- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- include_expsyms_GCJ= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- extract_expsyms_cmds= +- +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac +- +- ld_shlibs_GCJ=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' +- +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix3* | aix4* | aix5*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- ld_shlibs_GCJ=no +- cat <&2 +- +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. +- +-EOF +- fi +- ;; +- +- amigaos*) +- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_minus_L_GCJ=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- ld_shlibs_GCJ=no +- ;; +- +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag_GCJ=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; +- +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- allow_undefined_flag_GCJ=unsupported +- always_export_symbols_GCJ=no +- enable_shared_with_static_runtimes_GCJ=yes +- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* $[^ ]*$/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' +- +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' +- else +- ld_shlibs=no +- fi +- ;; +- +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; +- +- solaris* | sysv5*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- ld_shlibs_GCJ=no +- cat <&2 +- +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. +- +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; +- +- sunos4*) +- archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; +- +- linux*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_cmds_GCJ="$tmp_archive_cmds" +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ +-cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ +-$echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- else +- archive_expsym_cmds_GCJ="$tmp_archive_cmds" +- fi +- else +- ld_shlibs_GCJ=no +- fi +- ;; +- +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; +- esac +- +- if test "$ld_shlibs_GCJ" = yes; then +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec_GCJ= +- fi +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag_GCJ=unsupported +- always_export_symbols_GCJ=yes +- archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L_GCJ=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct_GCJ=unsupported +- fi +- ;; +- +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no +- +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- esac +- +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi +- +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +- +- archive_cmds_GCJ='' +- hardcode_direct_GCJ=yes +- hardcode_libdir_separator_GCJ=':' +- link_all_deplibs_GCJ=yes +- +- if test "$GCC" = yes; then +- case $host_os in aix4.012|aix4.012.*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- hardcode_direct_GCJ=yes +- else +- # We have old collect2 +- hardcode_direct_GCJ=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L_GCJ=yes +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_libdir_separator_GCJ= +- fi +- esac +- shared_flag='-shared' +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi +- +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols_GCJ=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag_GCJ='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-int +-main () +-{ +- +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'`; fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +- +- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag_GCJ="-z nodefs" +- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-int +-main () +-{ +- +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *$.*$$/\1/; p; } +-}'`; fi +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +- +- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag_GCJ=' ${wl}-bernotok' +- allow_undefined_flag_GCJ=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- always_export_symbols_GCJ=yes +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_GCJ=' ' +- archive_cmds_need_lc_GCJ=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; +- +- amigaos*) +- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_minus_L_GCJ=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs_GCJ=no +- ;; +- +- bsdi4*) +- export_dynamic_flag_spec_GCJ=-rdynamic +- ;; +- +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec_GCJ=' ' +- allow_undefined_flag_GCJ=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_From_new_cmds_GCJ='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes_GCJ=yes +- ;; +- +- darwin* | rhapsody*) +- if test "$GXX" = yes ; then +- archive_cmds_need_lc_GCJ=no +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag_GCJ='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag_GCJ='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag_GCJ='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- allow_undefined_flag_GCJ='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_cmds_GCJ='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- archive_cmds_GCJ='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- module_cmds_GCJ='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^$..*$,_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- hardcode_direct_GCJ=no +- hardcode_automatic_GCJ=yes +- hardcode_shlibpath_var_GCJ=unsupported +- whole_archive_flag_spec_GCJ='-all_load $convenience' +- link_all_deplibs_GCJ=yes +- else +- ld_shlibs_GCJ=no +- fi +- ;; +- +- dgux*) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_shlibpath_var_GCJ=no +- ;; +- +- freebsd1*) +- ld_shlibs_GCJ=no +- ;; +- +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; +- +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=yes +- hardcode_minus_L_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; +- +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu) +- archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; +- +- hpux9*) +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- hardcode_direct_GCJ=yes +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_GCJ=yes +- export_dynamic_flag_spec_GCJ='${wl}-E' +- ;; +- +- hpux10* | hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*|ia64*) +- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case "$host_cpu" in +- hppa*64*|ia64*) +- archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' +- ;; +- *) +- archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*) +- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' +- hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' +- hardcode_libdir_separator_GCJ=: +- hardcode_direct_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- ;; +- ia64*) +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_direct_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_GCJ=yes +- ;; +- *) +- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- hardcode_direct_GCJ=yes +- export_dynamic_flag_spec_GCJ='${wl}-E' +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_GCJ=yes +- ;; +- esac +- fi +- ;; +- +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' +- fi +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- link_all_deplibs_GCJ=yes +- ;; +- +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; +- +- newsos6) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=yes +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- hardcode_shlibpath_var_GCJ=no +- ;; +- +- openbsd*) +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_GCJ='${wl}-E' +- else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- ;; +- *) +- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- ;; +- +- os2*) +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_minus_L_GCJ=yes +- allow_undefined_flag_GCJ=unsupported +- archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; +- +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- allow_undefined_flag_GCJ=' -expect_unresolved \*' +- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- ;; +- +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- else +- allow_undefined_flag_GCJ=' -expect_unresolved \*' +- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' +- +- # Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec_GCJ='-rpath $libdir' +- fi +- hardcode_libdir_separator_GCJ=: +- ;; +- +- sco3.2v5*) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_GCJ=no +- export_dynamic_flag_spec_GCJ='${wl}-Bexport' +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ;; +- +- solaris*) +- no_undefined_flag_GCJ=' -z text' +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_shlibpath_var_GCJ=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; +- esac +- link_all_deplibs_GCJ=yes +- ;; +- +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_direct_GCJ=yes +- hardcode_minus_L_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; +- +- sysv4) +- case $host_vendor in +- sni) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- reload_cmds_GCJ='$CC -r -o $output$reload_objs' +- hardcode_direct_GCJ=no +- ;; +- motorola) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var_GCJ=no +- ;; +- +- sysv4.3*) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_GCJ=no +- export_dynamic_flag_spec_GCJ='-Bexport' +- ;; +- +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_GCJ=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs_GCJ=yes +- fi +- ;; +- +- sysv4.2uw2*) +- archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=yes +- hardcode_minus_L_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; +- +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) +- no_undefined_flag_GCJ='${wl}-z ${wl}text' +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var_GCJ=no +- ;; +- +- sysv5*) +- no_undefined_flag_GCJ=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec_GCJ= +- hardcode_shlibpath_var_GCJ=no +- runpath_var='LD_RUN_PATH' +- ;; +- +- uts4*) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_shlibpath_var_GCJ=no +- ;; +- +- *) +- ld_shlibs_GCJ=no +- ;; +- esac +- fi +- +-echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 +-echo "${ECHO_T}$ld_shlibs_GCJ" >&6 +-test "$ld_shlibs_GCJ" = no && can_build_shared=no +- +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi +- +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc_GCJ" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc_GCJ=yes +- +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds_GCJ in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 +- $rm conftest* +- printf "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl_GCJ +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ +- allow_undefined_flag_GCJ= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc_GCJ=no +- else +- archive_cmds_need_lc_GCJ=yes +- fi +- allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 +-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6 +- ;; +- esac +- fi +- ;; +-esac +- +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +-if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +-else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +-fi +-need_lib_prefix=unknown +-hardcode_into_libs=no +- +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown +- +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH +- +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- +-aix4* | aix5*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; +- +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; +- +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; +- +-bsdi4*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; +- +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no +- +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes +- +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}' +- ;; +- esac +- ;; +- +- *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' +- ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; +- +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' +- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. +- if test "$GCC" = yes; then +- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` +- else +- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' +- fi +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; +- +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-freebsd1*) +- dynamic_linker=no +- ;; +- +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.01* | freebsdelf3.01*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- *) # from 3.2 on +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- esac +- ;; +- +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; +- +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case "$host_cpu" in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; +- +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; +- +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; +- +-# This must be Linux ELF. +-linux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes +- +- # find out which ABI we are using +- libsuff= +- case "$host_cpu" in +- x86_64*|s390x*|powerpc64*) +- echo '#line 17153 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *64-bit*) +- libsuff=64 +- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +- esac +- +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" +- fi +- +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; +- +-knetbsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-openbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=yes +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; +- +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; +- +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; +- +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; +- +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; +- +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; +- +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; +- +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-*) +- dynamic_linker=no +- ;; +-esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 +-test "$dynamic_linker" = no && can_build_shared=no +- +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +-hardcode_action_GCJ= +-if test -n "$hardcode_libdir_flag_spec_GCJ" || \ +- test -n "$runpath_var GCJ" || \ +- test "X$hardcode_automatic_GCJ"="Xyes" ; then +- +- # We can hardcode non-existant directories. +- if test "$hardcode_direct_GCJ" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && +- test "$hardcode_minus_L_GCJ" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action_GCJ=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action_GCJ=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action_GCJ=unsupported +-fi +-echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 +-echo "${ECHO_T}$hardcode_action_GCJ" >&6 +- +-if test "$hardcode_action_GCJ" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi +- +-striplib= +-old_striplib= +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 +- else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- ;; +- *) +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +- ;; +- esac +-fi +- +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= +- +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ;; +- +- mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; +- +- cygwin*) +- lt_cv_dlopen="dlopen" +- lt_cv_dlopen_libs= +- ;; +- +- darwin*) +- # if libdl is installed we need to link against it +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_lib_dl_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- +-fi +- +- ;; +- +- *) +- echo "$as_me:$LINENO: checking for shl_load" >&5 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +-if test "${ac_cv_func_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define shl_load to an innocuous variant, in case declares shl_load. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shl_load innocuous_shl_load +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shl_load (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef shl_load +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_shl_load) || defined (__stub___shl_load) +-choke me +-#else +-char (*f) () = shl_load; +-#endif +-#ifdef __cplusplus +-} +-#endif +- +-int +-main () +-{ +-return f != shl_load; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_func_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +-if test $ac_cv_func_shl_load = yes; then +- lt_cv_dlopen="shl_load" +-else +- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-int +-main () +-{ +-shl_load (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_lib_dld_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +-if test $ac_cv_lib_dld_shl_load = yes; then +- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +-else +- echo "$as_me:$LINENO: checking for dlopen" >&5 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +-if test "${ac_cv_func_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define dlopen to an innocuous variant, in case declares dlopen. +- For example, HP-UX 11i declares gettimeofday. */ +-#define dlopen innocuous_dlopen +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char dlopen (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef dlopen +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_dlopen) || defined (__stub___dlopen) +-choke me +-#else +-char (*f) () = dlopen; +-#endif +-#ifdef __cplusplus +-} +-#endif +- +-int +-main () +-{ +-return f != dlopen; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_func_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +-if test $ac_cv_func_dlopen = yes; then +- lt_cv_dlopen="dlopen" +-else +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_lib_dl_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +-if test "${ac_cv_lib_svld_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lsvld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_svld_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_lib_svld_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +-if test $ac_cv_lib_svld_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +-else +- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_dld_link+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dld_link (); +-int +-main () +-{ +-dld_link (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_dld_link=yes ++if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then ++ case $lt_prog_compiler_pic_CXX in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; ++ esac + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ lt_prog_compiler_pic_CXX= ++ lt_prog_compiler_can_build_shared_CXX=no ++fi + +-ac_cv_lib_dld_dld_link=no + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS + -+ # Archives containing C++ object files must be created using -+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is -+ # necessary to make sure instantiated templates are included -+ # in the archive. -+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' -+ ;; -+ *) -+ if test "$GXX" = yes; then -+ if test "$with_gnu_ld" = no; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ else -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' -+ fi -+ fi -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ ;; -+ esac -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ _LT_TAGVAR(inherit_rpath, $1)=yes -+ ;; + -+ linux* | k*bsd*-gnu | kopensolaris*-gnu) -+ case $cc_basename in -+ KCC*) -+ # Kuck and Associates, Inc. (KAI) C++ Compiler + -+ # KCC will only create a shared library if the output file -+ # ends with ".so" (or ".sl" for HP-UX), so rename the library -+ # to its proper name (with version) after linking. -+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } ++if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_static_works_CXX=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_static_works_CXX=yes ++ fi ++ else ++ lt_cv_prog_compiler_static_works_CXX=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" + -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +-if test $ac_cv_lib_dld_dld_link = yes; then +- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 ++$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } + -+ # Archives containing C++ object files must be created using -+ # "CC -Bstatic", where "CC" is the KAI C++ compiler. -+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' -+ ;; -+ icpc* | ecpc* ) -+ # Intel C++ -+ with_gnu_ld=yes -+ # version 8.0 and above of icpc choke on multiply defined symbols -+ # if we add $predep_objects and $postdep_objects, however 7.1 and -+ # earlier do not add the objects themselves. -+ case `$CC -V 2>&1` in -+ *"Version 7."*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ ;; -+ *) # Version 8.0 or newer -+ tmp_idyn= -+ case $host_cpu in -+ ia64*) tmp_idyn=' -i_dynamic';; -+ esac -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' -+ ;; -+ esac -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' -+ ;; -+ pgCC* | pgcpp*) -+ # Portland Group C++ compiler -+ case `$CC -V` in -+ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) -+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ -+ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' -+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ -+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ -+ $RANLIB $oldlib' -+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ -+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ -+ rm -rf $tpldir~ -+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ -+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' -+ ;; -+ *) # Version 6 will use weak symbols -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' -+ ;; -+ esac ++if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then ++ : ++else ++ lt_prog_compiler_static_CXX= + fi + + +-fi + + +-fi ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 ++$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } ++if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_c_o_CXX=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:13427: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:13431: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o_CXX=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* + + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 ++$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } + + +-fi + ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 ++$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } ++if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ lt_cv_prog_compiler_c_o_CXX=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ ;; -+ cxx*) -+ # Compaq C++ -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:13479: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:13483: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o_CXX=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* + + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 ++$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } + +- ;; +- esac + +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no + -+ runpath_var=LD_RUN_PATH -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: + -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ ;; -+ xl*) -+ # IBM XL 8.0 on PPC, with GNU ld -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -+ if test "x$supports_anon_versioning" = xyes; then -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ -+ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ -+ echo "local: *; };" >> $output_objdir/$libname.ver~ -+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' -+ fi -+ ;; -+ *) -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C++ 5.9 -+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' -+ _LT_TAGVAR(compiler_needs_object, $1)=yes ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 ++$as_echo_n "checking if we can lock with hard links... " >&6; } ++ hard_links=yes ++ $RM conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 ++$as_echo "$hard_links" >&6; } ++ if test "$hard_links" = no; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn + fi ++else ++ need_locks=no ++fi + +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + +- save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + +- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < $export_symbols' ++ case $host_os in ++ aix[4-9]*) ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ ;; ++ pw32*) ++ export_symbols_cmds_CXX="$ltdll_cmds" ++ ;; ++ cygwin* | mingw* | cegcc*) ++ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]$[^ ]*$/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__$[^ ]*$[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ linux* | k*bsd*-gnu) ++ link_all_deplibs_CXX=no ++ ;; ++ *) ++ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ esac ++ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + +-#if HAVE_DLFCN_H +-#include +-#endif ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 ++$as_echo "$ld_shlibs_CXX" >&6; } ++test "$ld_shlibs_CXX" = no && can_build_shared=no + +-#include ++with_gnu_ld_CXX=$with_gnu_ld + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc_CXX" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc_CXX=yes + -+ # Not sure whether something based on -+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 -+ # would be better. -+ output_verbose_link_cmd='echo' ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds_CXX in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 ++$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + -+ # Archives containing C++ object files must be created using -+ # "CC -xar", where "CC" is the Sun C++ compiler. This is -+ # necessary to make sure instantiated templates are included -+ # in the archive. -+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' -+ ;; -+ esac -+ ;; -+ esac -+ ;; ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 ++ (eval $ac_compile) 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self=no ;; ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl_CXX ++ pic_flag=$lt_prog_compiler_pic_CXX ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX ++ allow_undefined_flag_CXX= ++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 ++ (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } ++ then ++ archive_cmds_need_lc_CXX=no ++ else ++ archive_cmds_need_lc_CXX=yes ++ fi ++ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $RM conftest* ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_CXX" >&5 ++$as_echo "$archive_cmds_need_lc_CXX" >&6; } ++ ;; + esac +- else : +- # compilation failed +- lt_cv_dlopen_self=no + fi +-fi +-rm -fr conftest* ++ ;; ++esac + -+ lynxos*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; + -+ m88k*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; + -+ mvs*) -+ case $cc_basename in -+ cxx*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac -+ ;; + -+ netbsd*) -+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' -+ wlarc= -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ fi -+ # Workaround some broken pre-1.5 toolchains -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' -+ ;; + + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + +- if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" +- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self_static+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self_static=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif + +-#include + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self_static=no +- fi +-fi +-rm -fr conftest* + + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 +- fi + +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac + +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac + +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; +- esac +-fi + + +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_GCJ \ +- CC_GCJ \ +- LD_GCJ \ +- lt_prog_compiler_wl_GCJ \ +- lt_prog_compiler_pic_GCJ \ +- lt_prog_compiler_static_GCJ \ +- lt_prog_compiler_no_builtin_flag_GCJ \ +- export_dynamic_flag_spec_GCJ \ +- thread_safe_flag_spec_GCJ \ +- whole_archive_flag_spec_GCJ \ +- enable_shared_with_static_runtimes_GCJ \ +- old_archive_cmds_GCJ \ +- old_archive_from_new_cmds_GCJ \ +- predep_objects_GCJ \ +- postdep_objects_GCJ \ +- predeps_GCJ \ +- postdeps_GCJ \ +- compiler_lib_search_path_GCJ \ +- archive_cmds_GCJ \ +- archive_expsym_cmds_GCJ \ +- postinstall_cmds_GCJ \ +- postuninstall_cmds_GCJ \ +- old_archive_from_expsyms_cmds_GCJ \ +- allow_undefined_flag_GCJ \ +- no_undefined_flag_GCJ \ +- export_symbols_cmds_GCJ \ +- hardcode_libdir_flag_spec_GCJ \ +- hardcode_libdir_flag_spec_ld_GCJ \ +- hardcode_libdir_separator_GCJ \ +- hardcode_automatic_GCJ \ +- module_cmds_GCJ \ +- module_expsym_cmds_GCJ \ +- lt_cv_prog_compiler_c_o_GCJ \ +- exclude_expsyms_GCJ \ +- include_expsyms_GCJ; do +- +- case $var in +- old_archive_cmds_GCJ | \ +- old_archive_from_new_cmds_GCJ | \ +- archive_cmds_GCJ | \ +- archive_expsym_cmds_GCJ | \ +- module_cmds_GCJ | \ +- module_expsym_cmds_GCJ | \ +- old_archive_from_expsyms_cmds_GCJ | \ +- export_symbols_cmds_GCJ | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done + +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac + +-cfgfile="$ofile" + +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_GCJ + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install + +-# The host system. +-host_alias=$host_alias +-host=$host + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS + +-# A C compiler. +-LTCC=$lt_LTCC + +-# A language-specific compiler. +-CC=$lt_compiler_GCJ + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_GCJ + +-# An ERE matcher. +-EGREP=$lt_EGREP + +-# The linker used to build libraries. +-LD=$lt_LD_GCJ + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S + +-# A BSD-compatible nm program. +-NM=$lt_NM + +-# A symbol stripping program +-STRIP=$lt_STRIP + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" + +-# Used on cygwin: assembler. +-AS="$AS" + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_GCJ + +-# Object file suffix (normally "o"). +-objext="$ac_objext" + +-# Old archive suffix (normally "a"). +-libext="$libext" + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' + +-# Executable file suffix (normally ""). +-exeext="$exeext" + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_GCJ +-pic_mode=$pic_mode + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ + +-# Must we lock files when doing compilation ? +-need_locks=$lt_need_locks + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix + +-# Do we need a version for libraries? +-need_version=$need_version + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_GCJ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 ++$as_echo_n "checking dynamic linker characteristics... " >&6; } + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++need_lib_prefix=unknown ++hardcode_into_libs=no + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; + +-# Library versioning type. +-version_type=$version_type ++aix[4-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec ++amigaos*) ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ ;; ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/$[^/]*$\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ esac ++ ;; + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++bsdi[45]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_GCJ +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds ++cygwin* | mingw* | pw32* | cegcc*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes + -+ *nto* | *qnx*) -+ _LT_TAGVAR(ld_shlibs, $1)=yes ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw* | cegcc*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_GCJ +-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_GCJ +-module_expsym_cmds=$lt_module_expsym_cmds_GCJ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++freebsd1*) ++ dynamic_linker=no ++ ;; + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_GCJ +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_GCJ +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_GCJ +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_GCJ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; + +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd ++interix[3-9]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_GCJ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_GCJ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds ++# This must be Linux ELF. ++linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ ++ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval ++int ++main () ++{ + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_cxx_try_link "$LINENO"; then : ++ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : ++ shlibpath_overrides_runpath=yes ++fi ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_GCJ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs ++*nto* | *qnx*) ++ version_type=qnx ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' ++ ;; + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no + ;; -+ -+ openbsd2*) -+ # C++ shared libraries are fairly broken -+ _LT_TAGVAR(ld_shlibs, $1)=no ++ *) ++ shlibpath_overrides_runpath=yes + ;; -+ -+ openbsd*) -+ if test -f /usr/libexec/ld.so; then -+ _LT_TAGVAR(hardcode_direct, $1)=yes -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' -+ fi -+ output_verbose_link_cmd=echo -+ else -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_GCJ +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_GCJ +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_GCJ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_GCJ ++rdos*) ++ dynamic_linker=no ++ ;; + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path_GCJ" ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_GCJ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_GCJ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_GCJ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_GCJ ++*) ++ dynamic_linker=no ++ ;; ++esac ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 ++$as_echo "$dynamic_linker" >&6; } ++test "$dynamic_linker" = no && can_build_shared=no + +-# ### END LIBTOOL TAG CONFIG: $tagname ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi + +-__EOF__ ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++fi ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++fi + + +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi + + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-CC="$lt_save_CC" + +- else +- tagname="" +- fi +- ;; + +- RC) + + + +-# Source file extension for RC test sources. +-ac_ext=rc + +-# Object file extension for compiled RC test sources. +-objext=o +-objext_RC=$objext + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' + +-# Code to be used in simple link tests +-lt_simple_link_test_code="$lt_simple_compile_test_code" + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} + +-# Allow CC to be a program name with arguments. +-compiler=$CC + + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${RC-"windres"} +-compiler=$CC +-compiler_RC=$CC +-lt_cv_prog_compiler_c_o_RC=yes + +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_RC \ +- CC_RC \ +- LD_RC \ +- lt_prog_compiler_wl_RC \ +- lt_prog_compiler_pic_RC \ +- lt_prog_compiler_static_RC \ +- lt_prog_compiler_no_builtin_flag_RC \ +- export_dynamic_flag_spec_RC \ +- thread_safe_flag_spec_RC \ +- whole_archive_flag_spec_RC \ +- enable_shared_with_static_runtimes_RC \ +- old_archive_cmds_RC \ +- old_archive_from_new_cmds_RC \ +- predep_objects_RC \ +- postdep_objects_RC \ +- predeps_RC \ +- postdeps_RC \ +- compiler_lib_search_path_RC \ +- archive_cmds_RC \ +- archive_expsym_cmds_RC \ +- postinstall_cmds_RC \ +- postuninstall_cmds_RC \ +- old_archive_from_expsyms_cmds_RC \ +- allow_undefined_flag_RC \ +- no_undefined_flag_RC \ +- export_symbols_cmds_RC \ +- hardcode_libdir_flag_spec_RC \ +- hardcode_libdir_flag_spec_ld_RC \ +- hardcode_libdir_separator_RC \ +- hardcode_automatic_RC \ +- module_cmds_RC \ +- module_expsym_cmds_RC \ +- lt_cv_prog_compiler_c_o_RC \ +- exclude_expsyms_RC \ +- include_expsyms_RC; do +- +- case $var in +- old_archive_cmds_RC | \ +- old_archive_from_new_cmds_RC | \ +- archive_cmds_RC | \ +- archive_expsym_cmds_RC | \ +- module_cmds_RC | \ +- module_expsym_cmds_RC | \ +- old_archive_from_expsyms_cmds_RC | \ +- export_symbols_cmds_RC | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done + +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac + +-cfgfile="$ofile" + +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_RC + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install + +-# The host system. +-host_alias=$host_alias +-host=$host + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS + +-# A C compiler. +-LTCC=$lt_LTCC + +-# A language-specific compiler. +-CC=$lt_compiler_RC + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_RC + +-# An ERE matcher. +-EGREP=$lt_EGREP ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 ++$as_echo_n "checking how to hardcode library paths into programs... " >&6; } ++hardcode_action_CXX= ++if test -n "$hardcode_libdir_flag_spec_CXX" || ++ test -n "$runpath_var_CXX" || ++ test "X$hardcode_automatic_CXX" = "Xyes" ; then + +-# The linker used to build libraries. +-LD=$lt_LD_RC ++ # We can hardcode non-existent directories. ++ if test "$hardcode_direct_CXX" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && ++ test "$hardcode_minus_L_CXX" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action_CXX=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action_CXX=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action_CXX=unsupported ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 ++$as_echo "$hardcode_action_CXX" >&6; } + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++if test "$hardcode_action_CXX" = relink || ++ test "$inherit_rpath_CXX" = yes; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi + +-# A BSD-compatible nm program. +-NM=$lt_NM + +-# A symbol stripping program +-STRIP=$lt_STRIP + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" + +-# Used on cygwin: assembler. +-AS="$AS" + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir ++ fi # test -n "$compiler" + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds ++ CC=$lt_save_CC ++ LDCXX=$LD ++ LD=$lt_save_LD ++ GCC=$lt_save_GCC ++ with_gnu_ld=$lt_save_with_gnu_ld ++ lt_cv_path_LDCXX=$lt_cv_path_LD ++ lt_cv_path_LD=$lt_save_path_LD ++ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld ++ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ++fi # test "$_lt_caught_CXX_error" != yes + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_RC ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-# Object file suffix (normally "o"). +-objext="$ac_objext" + +-# Old archive suffix (normally "a"). +-libext="$libext" + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' + +-# Executable file suffix (normally ""). +-exeext="$exeext" + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_RC +-pic_mode=$pic_mode + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC + +-# Must we lock files when doing compilation ? +-need_locks=$lt_need_locks + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix + +-# Do we need a version for libraries? +-need_version=$need_version + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static ++ ac_config_commands="$ac_config_commands libtool" + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_RC + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC ++# Only expand once: + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC + +-# Library versioning type. +-version_type=$version_type + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec ++# Checks for libraries. + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++# Checks for header files. ++ac_header_dirent=no ++for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do ++ as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5 ++$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } ++if eval "test \"\${$as_ac_Header+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++#include <$ac_hdr> + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++int ++main () ++{ ++if ((DIR *) 0) ++return 0; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ eval "$as_ac_Header=yes" ++else ++ eval "$as_ac_Header=no" ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++eval ac_res=\$$as_ac_Header ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 ++$as_echo "$ac_res" >&6; } ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 ++_ACEOF + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_RC +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ac_header_dirent=$ac_hdr; break ++fi + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC ++done ++# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. ++if test $ac_header_dirent = dirent.h; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 ++$as_echo_n "checking for library containing opendir... " >&6; } ++if test "${ac_cv_search_opendir+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_func_search_save_LIBS=$LIBS ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char opendir (); ++int ++main () ++{ ++return opendir (); ++ ; ++ return 0; ++} ++_ACEOF ++for ac_lib in '' dir; do ++ if test -z "$ac_lib"; then ++ ac_res="none required" ++ else ++ ac_res=-l$ac_lib ++ LIBS="-l$ac_lib $ac_func_search_save_LIBS" ++ fi ++ if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_search_opendir=$ac_res ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext ++ if test "${ac_cv_search_opendir+set}" = set; then : ++ break ++fi ++done ++if test "${ac_cv_search_opendir+set}" = set; then : + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_RC +-archive_expsym_cmds=$lt_archive_expsym_cmds_RC +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++else ++ ac_cv_search_opendir=no ++fi ++rm conftest.$ac_ext ++LIBS=$ac_func_search_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 ++$as_echo "$ac_cv_search_opendir" >&6; } ++ac_res=$ac_cv_search_opendir ++if test "$ac_res" != no; then : ++ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_RC +-module_expsym_cmds=$lt_module_expsym_cmds_RC ++fi + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 ++$as_echo_n "checking for library containing opendir... " >&6; } ++if test "${ac_cv_search_opendir+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ ac_func_search_save_LIBS=$LIBS ++cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_RC +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_RC +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_RC +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_RC ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char opendir (); ++int ++main () ++{ ++return opendir (); ++ ; ++ return 0; ++} ++_ACEOF ++for ac_lib in '' x; do ++ if test -z "$ac_lib"; then ++ ac_res="none required" ++ else ++ ac_res=-l$ac_lib ++ LIBS="-l$ac_lib $ac_func_search_save_LIBS" ++ fi ++ if ac_fn_c_try_link "$LINENO"; then : ++ ac_cv_search_opendir=$ac_res ++fi ++rm -f core conftest.err conftest.$ac_objext \ ++ conftest$ac_exeext ++ if test "${ac_cv_search_opendir+set}" = set; then : ++ break ++fi ++done ++if test "${ac_cv_search_opendir+set}" = set; then : + +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_RC ++else ++ ac_cv_search_opendir=no ++fi ++rm conftest.$ac_ext ++LIBS=$ac_func_search_save_LIBS ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 ++$as_echo "$ac_cv_search_opendir" >&6; } ++ac_res=$ac_cv_search_opendir ++if test "$ac_res" != no; then : ++ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++fi + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd ++fi + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_RC ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 ++$as_echo_n "checking for ANSI C header files... " >&6; } ++if test "${ac_cv_header_stdc+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++#include ++#include ++#include + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_RC ++int ++main () ++{ + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_header_stdc=yes ++else ++ ac_cv_header_stdc=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval ++if test $ac_cv_header_stdc = yes; then ++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "memchr" >/dev/null 2>&1; then : + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++fi + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var ++if test $ac_cv_header_stdc = yes; then ++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "free" >/dev/null 2>&1; then : + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++else ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_RC ++fi + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs ++if test $ac_cv_header_stdc = yes; then ++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. ++ if test "$cross_compiling" = yes; then : ++ : ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++#include ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) ++#endif + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC ++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) ++int ++main () ++{ ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ return 2; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_run "$LINENO"; then : + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_RC +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_RC +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_RC ++else ++ ac_cv_header_stdc=no ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext ++fi + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" ++fi ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 ++$as_echo "$ac_cv_header_stdc" >&6; } ++if test $ac_cv_header_stdc = yes; then + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_RC ++$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++fi + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys/wait.h that is POSIX.1 compatible" >&5 ++$as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; } ++if test "${ac_cv_header_sys_wait_h+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++#include ++#ifndef WEXITSTATUS ++# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8) ++#endif ++#ifndef WIFEXITED ++# define WIFEXITED(stat_val) (((stat_val) & 255) == 0) ++#endif + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path_RC" ++int ++main () ++{ ++ int s; ++ wait (&s); ++ s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_header_sys_wait_h=yes ++else ++ ac_cv_header_sys_wait_h=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_wait_h" >&5 ++$as_echo "$ac_cv_header_sys_wait_h" >&6; } ++if test $ac_cv_header_sys_wait_h = yes; then + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_RC ++$as_echo "#define HAVE_SYS_WAIT_H 1" >>confdefs.h + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_RC ++fi + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds ++for ac_header in fcntl.h malloc.h memory.h stdlib.h string.h strings.h sys/file.h sys/ioctl.h sys/systeminfo.h unistd.h values.h inttypes.h ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_RC ++fi + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_RC ++done + +-# ### END LIBTOOL TAG CONFIG: $tagname ++ac_ext=cpp ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +-__EOF__ + ++for ac_header in strstream.h sstream fstream.h fstream iostream.h iostream iomanip.h iomanip ++do : ++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ++ac_fn_cxx_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF + +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi + fi + ++done + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' +@@ -19073,4770 +14797,3758 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS con + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-CC="$lt_save_CC" +- +- ;; +- +- *) +- { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 +-echo "$as_me: error: Unsupported tag name: $tagname" >&2;} +- { (exit 1); exit 1; }; } +- ;; +- esac +- +- # Append the new tag name to the list of available tags. +- if test -n "$tagname" ; then +- available_tags="$available_tags $tagname" +- fi +- fi +- done +- IFS="$lt_save_ifs" +- +- # Now substitute the updated list of available tags. +- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then +- mv "${ofile}T" "$ofile" +- chmod +x "$ofile" +- else +- rm -f "${ofile}T" +- { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 +-echo "$as_me: error: unable to update list of available tagged configurations." >&2;} +- { (exit 1); exit 1; }; } +- fi +-fi +- +- +- +-# This can be used to rebuild libtool when needed +-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" +- +-# Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' +- +-# Prevent multiple expansion +- +- +- +- +- + ++# Checks for typedefs, structures, and compiler characteristics. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat file-mode macros are broken" >&5 ++$as_echo_n "checking whether stat file-mode macros are broken... " >&6; } ++if test "${ac_cv_header_stat_broken+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++#include + ++#if defined S_ISBLK && defined S_IFDIR ++extern char c1[S_ISBLK (S_IFDIR) ? -1 : 1]; ++#endif + ++#if defined S_ISBLK && defined S_IFCHR ++extern char c2[S_ISBLK (S_IFCHR) ? -1 : 1]; ++#endif + ++#if defined S_ISLNK && defined S_IFREG ++extern char c3[S_ISLNK (S_IFREG) ? -1 : 1]; ++#endif + ++#if defined S_ISSOCK && defined S_IFREG ++extern char c4[S_ISSOCK (S_IFREG) ? -1 : 1]; ++#endif + ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_header_stat_broken=no ++else ++ ac_cv_header_stat_broken=yes ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stat_broken" >&5 ++$as_echo "$ac_cv_header_stat_broken" >&6; } ++if test $ac_cv_header_stat_broken = yes; then + ++$as_echo "#define STAT_MACROS_BROKEN 1" >>confdefs.h + ++fi + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99" >&5 ++$as_echo_n "checking for stdbool.h that conforms to C99... " >&6; } ++if test "${ac_cv_header_stdbool_h+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ + ++#include ++#ifndef bool ++ "error: bool is not defined" ++#endif ++#ifndef false ++ "error: false is not defined" ++#endif ++#if false ++ "error: false is not 0" ++#endif ++#ifndef true ++ "error: true is not defined" ++#endif ++#if true != 1 ++ "error: true is not 1" ++#endif ++#ifndef __bool_true_false_are_defined ++ "error: __bool_true_false_are_defined is not defined" ++#endif + ++ struct s { _Bool s: 1; _Bool t; } s; + ++ char a[true == 1 ? 1 : -1]; ++ char b[false == 0 ? 1 : -1]; ++ char c[__bool_true_false_are_defined == 1 ? 1 : -1]; ++ char d[(bool) 0.5 == true ? 1 : -1]; ++ bool e = &s; ++ char f[(_Bool) 0.0 == false ? 1 : -1]; ++ char g[true]; ++ char h[sizeof (_Bool)]; ++ char i[sizeof s.t]; ++ enum { j = false, k = true, l = false * true, m = true * 256 }; ++ /* The following fails for ++ HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */ ++ _Bool n[m]; ++ char o[sizeof n == m * sizeof n[0] ? 1 : -1]; ++ char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1]; ++# if defined __xlc__ || defined __GNUC__ ++ /* Catch a bug in IBM AIX xlc compiler version 6.0.0.0 ++ reported by James Lemley on 2005-10-05; see ++ http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html ++ This test is not quite right, since xlc is allowed to ++ reject this program, as the initializer for xlcbug is ++ not one of the forms that C requires support for. ++ However, doing the test right would require a runtime ++ test, and that would make cross-compilation harder. ++ Let us hope that IBM fixes the xlc bug, and also adds ++ support for this kind of constant expression. In the ++ meantime, this test will reject xlc, which is OK, since ++ our stdbool.h substitute should suffice. We also test ++ this with GCC, where it should work, to detect more ++ quickly whether someone messes up the test in the ++ future. */ ++ char digs[] = "0123456789"; ++ int xlcbug = 1 / (&(digs + 5)[-2 + (bool) 1] == &digs[4] ? 1 : -1); ++# endif ++ /* Catch a bug in an HP-UX C compiler. See ++ http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html ++ http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html ++ */ ++ _Bool q = true; ++ _Bool *pq = &q; + ++int ++main () ++{ + ++ *pq |= q; ++ *pq |= ! q; ++ /* Refer to every declared value, to avoid compiler optimizations. */ ++ return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l ++ + !m + !n + !o + !p + !q + !pq); + ++ ; ++ return 0; ++} ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_header_stdbool_h=yes ++else ++ ac_cv_header_stdbool_h=no ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5 ++$as_echo "$ac_cv_header_stdbool_h" >&6; } ++ac_fn_c_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default" ++if test "x$ac_cv_type__Bool" = x""yes; then : + +-# Checks for libraries. ++cat >>confdefs.h <<_ACEOF ++#define HAVE__BOOL 1 ++_ACEOF + +-# Checks for header files. + ++fi + ++if test $ac_cv_header_stdbool_h = yes; then + ++$as_echo "#define HAVE_STDBOOL_H 1" >>confdefs.h + ++fi + +-ac_header_dirent=no +-for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do +- as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5 +-echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 ++$as_echo_n "checking for an ANSI C-conforming const... " >&6; } ++if test "${ac_cv_c_const+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-#include +-#include <$ac_hdr> + + int + main () + { +-if ((DIR *) 0) +-return 0; ++/* FIXME: Include the comments suggested by Paul. */ ++#ifndef __cplusplus ++ /* Ultrix mips cc rejects this. */ ++ typedef int charset[2]; ++ const charset cs; ++ /* SunOS 4.1.1 cc rejects this. */ ++ char const *const *pcpcc; ++ char **ppc; ++ /* NEC SVR4.0.2 mips cc rejects this. */ ++ struct point {int x, y;}; ++ static struct point const zero = {0,0}; ++ /* AIX XL C 1.02.0.0 rejects this. ++ It does not let you subtract one const X* pointer from another in ++ an arm of an if-expression whose if-part is not a constant ++ expression */ ++ const char *g = "string"; ++ pcpcc = &g + (g ? g-g : 0); ++ /* HPUX 7.0 cc rejects these. */ ++ ++pcpcc; ++ ppc = (char**) pcpcc; ++ pcpcc = (char const *const *) ppc; ++ { /* SCO 3.2v4 cc rejects this. */ ++ char *t; ++ char const *s = 0 ? (char *) 0 : (char const *) 0; + -+ osf3* | osf4* | osf5*) -+ case $cc_basename in -+ KCC*) -+ # Kuck and Associates, Inc. (KAI) C++ Compiler -+ -+ # KCC will only create a shared library if the output file -+ # ends with ".so" (or ".sl" for HP-UX), so rename the library -+ # to its proper name (with version) after linking. -+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' -+ -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ -+ # Archives containing C++ object files must be created using -+ # the KAI C++ compiler. -+ case $host in -+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; -+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; -+ esac -+ ;; -+ RCC*) -+ # Rational C++ 2.4.1 -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ cxx*) -+ case $host in -+ osf3*) -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ ;; -+ *) -+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ -+ echo "-hidden">> $lib.exp~ -+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ -+ $RM $lib.exp' -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' -+ ;; -+ esac -+ -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ # -+ # There doesn't appear to be a way to prevent this compiler from -+ # explicitly linking system object files so we need to strip them -+ # from the output so that they don't get included in the library -+ # dependencies. -+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' -+ ;; -+ *) -+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then -+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' -+ case $host in -+ osf3*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' -+ ;; -+ esac -+ -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=: -+ -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ -+ else -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ fi -+ ;; -+ esac -+ ;; -+ -+ psos*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; ++ *t++ = 0; ++ if (s) return 0; ++ } ++ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ ++ int x[] = {25, 17}; ++ const int *foo = &x[0]; ++ ++foo; ++ } ++ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ ++ typedef const int *iptr; ++ iptr p = 0; ++ ++p; ++ } ++ { /* AIX XL C 1.02.0.0 rejects this saying ++ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ ++ struct s { int j; const int *ap[3]; }; ++ struct s *b; b->j = 5; ++ } ++ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ ++ const int foo = 10; ++ if (!foo) return 0; ++ } ++ return !cs[0] && !zero.x; ++#endif + -+ sunos4*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.x -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ lcc*) -+ # Lucid -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac -+ ;; + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- eval "$as_ac_Header=yes" ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_c_const=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-eval "$as_ac_Header=no" ++ ac_cv_c_const=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +-if test `eval echo '${'$as_ac_Header'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 +-_ACEOF ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 ++$as_echo "$ac_cv_c_const" >&6; } ++if test $ac_cv_c_const = no; then + -+ solaris*) -+ case $cc_basename in -+ CC*) -+ # Sun C++ 4.2, 5.x and Centerline C++ -+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes -+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++$as_echo "#define const /**/" >>confdefs.h + +-ac_header_dirent=$ac_hdr; break + fi + +-done +-# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. +-if test $ac_header_dirent = dirent.h; then +- echo "$as_me:$LINENO: checking for library containing opendir" >&5 +-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 +-if test "${ac_cv_search_opendir+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 ++$as_echo_n "checking for inline... " >&6; } ++if test "${ac_cv_c_inline+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- ac_func_search_save_LIBS=$LIBS +-ac_cv_search_opendir=no +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ ac_cv_c_inline=no ++for ac_kw in inline __inline__ __inline; do ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ ++#ifndef __cplusplus ++typedef int foo_t; ++static $ac_kw foo_t static_foo () {return 0; } ++$ac_kw foo_t foo () {return 0; } ++#endif + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" ++_ACEOF ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_c_inline=$ac_kw ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ test "$ac_cv_c_inline" != no && break ++done + -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ case $host_os in -+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; -+ *) -+ # The compiler driver will combine and reorder linker options, -+ # but understands `-z linker_flag'. -+ # Supported since Solaris 2.6 (maybe 2.5.1?) -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' -+ ;; -+ esac -+ _LT_TAGVAR(link_all_deplibs, $1)=yes ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 ++$as_echo "$ac_cv_c_inline" >&6; } + -+ output_verbose_link_cmd='echo' ++case $ac_cv_c_inline in ++ inline | yes) ;; ++ *) ++ case $ac_cv_c_inline in ++ no) ac_val=;; ++ *) ac_val=$ac_cv_c_inline;; ++ esac ++ cat >>confdefs.h <<_ACEOF ++#ifndef __cplusplus ++#define inline $ac_val + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char opendir (); +-int +-main () +-{ +-opendir (); +- ; +- return 0; +-} + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_search_opendir="none required" ++ ;; ++esac + -+ # Archives containing C++ object files must be created using -+ # "CC -xar", where "CC" is the Sun C++ compiler. This is -+ # necessary to make sure instantiated templates are included -+ # in the archive. -+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' -+ ;; -+ gcx*) -+ # Green Hills C++ Compiler -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default" ++if test "x$ac_cv_type_pid_t" = x""yes; then : + -+ # The C++ compiler must be used to create the archive. -+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' -+ ;; -+ *) -+ # GNU C++ compiler with Solaris linker -+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then -+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' -+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ else -+ # g++ 2.7 appears to require `-G' NOT `-shared' on this -+ # platform. -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ -+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++cat >>confdefs.h <<_ACEOF ++#define pid_t int ++_ACEOF + + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test "$ac_cv_search_opendir" = no; then +- for ac_lib in dir; do +- LIBS="-l$ac_lib $ac_func_search_save_LIBS" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ + -+ # Commands to make compiler produce verbose output that lists -+ # what "hidden" libraries, object files and flags are used when -+ # linking a shared library. -+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' -+ fi ++ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" ++if test "x$ac_cv_type_size_t" = x""yes; then : + -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' -+ case $host_os in -+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; -+ *) -+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' -+ ;; -+ esac -+ fi -+ ;; -+ esac -+ ;; ++else + -+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) -+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ runpath_var='LD_RUN_PATH' ++cat >>confdefs.h <<_ACEOF ++#define size_t unsigned int + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF + -+ case $cc_basename in -+ CC*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ esac -+ ;; ++fi + -+ sysv5* | sco3.2v5* | sco5v6*) -+ # Note: We can NOT use -z defs as we might desire, because we do not -+ # link with -lc, and that would cause any symbols used from libc to -+ # always be unresolved, which means just about no library would -+ # ever link correctly. If we're not using GNU ld we use -z text -+ # though, which does catch some bad symbols but isn't as heavy-handed -+ # as -z defs. -+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' -+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' -+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no -+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no -+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' -+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' -+ _LT_TAGVAR(link_all_deplibs, $1)=yes -+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' -+ runpath_var='LD_RUN_PATH' ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 ++$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } ++if test "${ac_cv_header_time+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ ++#include ++#include ++#include + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char opendir (); + int + main () + { +-opendir (); ++if ((struct tm *) 0) ++return 0; + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_search_opendir="-l$ac_lib" +-break ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_header_time=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +- done ++ ac_cv_header_time=no + fi +-LIBS=$ac_func_search_save_LIBS ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 +-echo "${ECHO_T}$ac_cv_search_opendir" >&6 +-if test "$ac_cv_search_opendir" != no; then +- test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 ++$as_echo "$ac_cv_header_time" >&6; } ++if test $ac_cv_header_time = yes; then + -+ case $cc_basename in -+ CC*) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ *) -+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' -+ ;; -+ esac -+ ;; ++$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h + + fi + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 ++$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } ++if test "${ac_cv_struct_tm+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- echo "$as_me:$LINENO: checking for library containing opendir" >&5 +-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 +-if test "${ac_cv_search_opendir+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_func_search_save_LIBS=$LIBS +-ac_cv_search_opendir=no +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char opendir (); ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext ++/* end confdefs.h. */ ++#include ++#include + -+ tandem*) -+ case $cc_basename in -+ NCC*) -+ # NonStop-UX NCC 3.20 -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac -+ ;; + int + main () + { +-opendir (); ++struct tm tm; ++ int *p = &tm.tm_sec; ++ return !p; + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_search_opendir="none required" ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_struct_tm=time.h + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ac_cv_struct_tm=sys/time.h ++fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 ++$as_echo "$ac_cv_struct_tm" >&6; } ++if test $ac_cv_struct_tm = sys/time.h; then + -+ vxworks*) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; ++$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h + + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-if test "$ac_cv_search_opendir" = no; then +- for ac_lib in x; do +- LIBS="-l$ac_lib $ac_func_search_save_LIBS" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF + -+ *) -+ # FIXME: insert proper C++ library support -+ _LT_TAGVAR(ld_shlibs, $1)=no -+ ;; -+ esac ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working volatile" >&5 ++$as_echo_n "checking for working volatile... " >&6; } ++if test "${ac_cv_c_volatile+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char opendir (); + int + main () + { +-opendir (); + -+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++volatile int x; ++int * volatile y = (int *) 0; ++return !x && !y; + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_search_opendir="-l$ac_lib" +-break ++if ac_fn_c_try_compile "$LINENO"; then : ++ ac_cv_c_volatile=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +- done ++ ac_cv_c_volatile=no + fi +-LIBS=$ac_func_search_save_LIBS ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 +-echo "${ECHO_T}$ac_cv_search_opendir" >&6 +-if test "$ac_cv_search_opendir" != no; then +- test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_volatile" >&5 ++$as_echo "$ac_cv_c_volatile" >&6; } ++if test $ac_cv_c_volatile = no; then + +-fi ++$as_echo "#define volatile /**/" >>confdefs.h + + fi + +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +-if test "${ac_cv_header_stdc+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 + -+ _LT_TAGVAR(GCC, $1)="$GXX" -+ _LT_TAGVAR(LD, $1)="$LD" ++# Checks for library functions. ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether closedir returns void" >&5 ++$as_echo_n "checking whether closedir returns void... " >&6; } ++if test "${ac_cv_func_closedir_void+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ if test "$cross_compiling" = yes; then : ++ ac_cv_func_closedir_void=yes ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-#include +-#include +-#include +-#include ++$ac_includes_default ++#include <$ac_header_dirent> ++#ifndef __cplusplus ++int closedir (); ++#endif + + int + main () + { +- ++return closedir (opendir (".")) != 0; + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_header_stdc=yes ++if ac_fn_c_try_run "$LINENO"; then : ++ ac_cv_func_closedir_void=no + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ac_cv_func_closedir_void=yes ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext ++fi + +-ac_cv_header_stdc=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_closedir_void" >&5 ++$as_echo "$ac_cv_func_closedir_void" >&6; } ++if test $ac_cv_func_closedir_void = yes; then + +-if test $ac_cv_header_stdc = yes; then +- # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include ++$as_echo "#define CLOSEDIR_VOID 1" >>confdefs.h + +-_ACEOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "memchr" >/dev/null 2>&1; then +- : +-else +- ac_cv_header_stdc=no + fi +-rm -f conftest* + -+ ## CAVEAT EMPTOR: -+ ## There is no encapsulation within the following macros, do not change -+ ## the running order or otherwise move them around unless you know exactly -+ ## what you are doing... -+ _LT_SYS_HIDDEN_LIBDEPS($1) -+ _LT_COMPILER_PIC($1) -+ _LT_COMPILER_C_O($1) -+ _LT_COMPILER_FILE_LOCKS($1) -+ _LT_LINKER_SHLIBS($1) -+ _LT_SYS_DYNAMIC_LINKER($1) -+ _LT_LINKER_HARDCODE_LIBPATH($1) ++for ac_header in vfork.h ++do : ++ ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default" ++if test "x$ac_cv_header_vfork_h" = x""yes; then : ++ cat >>confdefs.h <<_ACEOF ++#define HAVE_VFORK_H 1 ++_ACEOF + + fi + +-if test $ac_cv_header_stdc = yes; then +- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include ++done + ++for ac_func in fork vfork ++do : ++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" ++if eval test \"x\$"$as_ac_var"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "free" >/dev/null 2>&1; then +- : +-else +- ac_cv_header_stdc=no +-fi +-rm -f conftest* + + fi ++done + +-if test $ac_cv_header_stdc = yes; then +- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +- if test "$cross_compiling" = yes; then +- : ++if test "x$ac_cv_func_fork" = xyes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5 ++$as_echo_n "checking for working fork... " >&6; } ++if test "${ac_cv_func_fork_works+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ if test "$cross_compiling" = yes; then : ++ ac_cv_func_fork_works=cross ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-#include +-#if ((' ' & 0x0FF) == 0x020) +-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +-#else +-# define ISLOWER(c) \ +- (('a' <= (c) && (c) <= 'i') \ +- || ('j' <= (c) && (c) <= 'r') \ +- || ('s' <= (c) && (c) <= 'z')) +-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +-#endif +- +-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) ++$ac_includes_default + int + main () + { +- int i; +- for (i = 0; i < 256; i++) +- if (XOR (islower (i), ISLOWER (i)) +- || toupper (i) != TOUPPER (i)) +- exit(2); +- exit (0); + -+ _LT_CONFIG($1) -+ fi # test -n "$compiler" ++ /* By Ruediger Kuhlmann. */ ++ return fork () < 0; + -+ CC=$lt_save_CC -+ LDCXX=$LD -+ LD=$lt_save_LD -+ GCC=$lt_save_GCC -+ with_gnu_ld=$lt_save_with_gnu_ld -+ lt_cv_path_LDCXX=$lt_cv_path_LD -+ lt_cv_path_LD=$lt_save_path_LD -+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -+fi # test "$_lt_caught_CXX_error" != yes ++ ; ++ return 0; + } + _ACEOF +-rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : ++if ac_fn_c_try_run "$LINENO"; then : ++ ac_cv_func_fork_works=yes + else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-( exit $ac_status ) +-ac_cv_header_stdc=no +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++ ac_cv_func_fork_works=no + fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext + fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6 +-if test $ac_cv_header_stdc = yes; then +- +-cat >>confdefs.h <<\_ACEOF +-#define STDC_HEADERS 1 +-_ACEOF + + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5 ++$as_echo "$ac_cv_func_fork_works" >&6; } + +-echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5 +-echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6 +-if test "${ac_cv_header_sys_wait_h+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ ac_cv_func_fork_works=$ac_cv_func_fork ++fi ++if test "x$ac_cv_func_fork_works" = xcross; then ++ case $host in ++ *-*-amigaos* | *-*-msdosdjgpp*) ++ # Override, as these systems have only a dummy fork() stub ++ ac_cv_func_fork_works=no ++ ;; ++ *) ++ ac_cv_func_fork_works=yes ++ ;; ++ esac ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 ++$as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} ++fi ++ac_cv_func_vfork_works=$ac_cv_func_vfork ++if test "x$ac_cv_func_vfork" = xyes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5 ++$as_echo_n "checking for working vfork... " >&6; } ++if test "${ac_cv_func_vfork_works+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ ac_cv_func_vfork_works=cross ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-#include ++/* Thanks to Paul Eggert for this test. */ ++$ac_includes_default + #include +-#ifndef WEXITSTATUS +-# define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8) ++#ifdef HAVE_VFORK_H ++# include + #endif +-#ifndef WIFEXITED +-# define WIFEXITED(stat_val) (((stat_val) & 255) == 0) ++/* On some sparc systems, changes by the child to local and incoming ++ argument registers are propagated back to the parent. The compiler ++ is told about this with #include , but some compilers ++ (e.g. gcc -O) don't grok . Test for this by using a ++ static variable whose address is put into a register that is ++ clobbered by the vfork. */ ++static void ++#ifdef __cplusplus ++sparc_address_test (int arg) ++# else ++sparc_address_test (arg) int arg; + #endif ++{ ++ static pid_t child; ++ if (!child) { ++ child = vfork (); ++ if (child < 0) { ++ perror ("vfork"); ++ _exit(2); ++ } ++ if (!child) { ++ arg = getpid(); ++ write(-1, "", 0); ++ _exit (arg); ++ } ++ } ++} + + int + main () + { +- int s; +- wait (&s); +- s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_header_sys_wait_h=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ pid_t parent = getpid (); ++ pid_t child; + +-ac_cv_header_sys_wait_h=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 +-echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 +-if test $ac_cv_header_sys_wait_h = yes; then ++ sparc_address_test (0); + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_SYS_WAIT_H 1 +-_ACEOF ++ child = vfork (); + +-fi ++ if (child == 0) { ++ /* Here is another test for sparc vfork register problems. This ++ test uses lots of local variables, at least as many local ++ variables as main has allocated so far including compiler ++ temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris ++ 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should ++ reuse the register of parent for one of the local variables, ++ since it will think that parent can't possibly be used any more ++ in this routine. Assigning to the local variable will thus ++ munge parent in the parent process. */ ++ pid_t ++ p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), ++ p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); ++ /* Convince the compiler that p..p7 are live; otherwise, it might ++ use the same hardware register for all 8 local variables. */ ++ if (p != p1 || p != p2 || p != p3 || p != p4 ++ || p != p5 || p != p6 || p != p7) ++ _exit(1); + -+AC_LANG_POP -+])# _LT_LANG_CXX_CONFIG ++ /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent ++ from child file descriptors. If the child closes a descriptor ++ before it execs or exits, this munges the parent's descriptor ++ as well. Test for this by closing stdout in the child. */ ++ _exit(close(fileno(stdout)) != 0); ++ } else { ++ int status; ++ struct stat st; + ++ while (wait(&status) != child) ++ ; ++ return ( ++ /* Was there some problem with vforking? */ ++ child < 0 + ++ /* Did the child fail? (This shouldn't happen.) */ ++ || status + ++ /* Did the vfork/compiler bug occur? */ ++ || parent != getpid() + ++ /* Did the file descriptor bug occur? */ ++ || fstat(fileno(stdout), &st) != 0 ++ ); ++ } ++} ++_ACEOF ++if ac_fn_c_try_run "$LINENO"; then : ++ ac_cv_func_vfork_works=yes ++else ++ ac_cv_func_vfork_works=no ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext ++fi + ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5 ++$as_echo "$ac_cv_func_vfork_works" >&6; } + ++fi; ++if test "x$ac_cv_func_fork_works" = xcross; then ++ ac_cv_func_vfork_works=$ac_cv_func_vfork ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 ++$as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} ++fi + ++if test "x$ac_cv_func_vfork_works" = xyes; then + ++$as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h + ++else + ++$as_echo "#define vfork fork" >>confdefs.h + ++fi ++if test "x$ac_cv_func_fork_works" = xyes; then + ++$as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h + +-for ac_header in fcntl.h malloc.h memory.h stdlib.h string.h strings.h sys/file.h sys/ioctl.h sys/systeminfo.h unistd.h values.h inttypes.h +-do +-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + ++if test $ac_cv_c_compiler_gnu = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5 ++$as_echo_n "checking whether $CC needs -traditional... " >&6; } ++if test "${ac_cv_prog_gcc_traditional+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ ac_pattern="Autoconf.*'x'" ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> ++#include ++Autoconf TIOCGETP + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_header_compiler=yes ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "$ac_pattern" >/dev/null 2>&1; then : ++ ac_cv_prog_gcc_traditional=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_header_compiler=no ++ ac_cv_prog_gcc_traditional=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++rm -f conftest* + +-# Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF + -+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) -+# --------------------------------- -+# Figure out "hidden" library dependencies from verbose -+# compiler output when linking a shared library. -+# Parse the compiler output and extract the necessary -+# objects, libraries and library flags. -+m4_defun([_LT_SYS_HIDDEN_LIBDEPS], -+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -+# Dependencies to place before and after the object being linked: -+_LT_TAGVAR(predep_objects, $1)= -+_LT_TAGVAR(postdep_objects, $1)= -+_LT_TAGVAR(predeps, $1)= -+_LT_TAGVAR(postdeps, $1)= -+_LT_TAGVAR(compiler_lib_search_path, $1)= ++ if test $ac_cv_prog_gcc_traditional = no; then ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-#include <$ac_header> ++#include ++Autoconf TCGETA + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "$ac_pattern" >/dev/null 2>&1; then : ++ ac_cv_prog_gcc_traditional=yes + fi +-if test -z "$ac_cpp_err"; then +- ac_header_preproc=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++rm -f conftest* + +- ac_header_preproc=no ++ fi + fi +-rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 +- +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## --------------------------------------------- ## +-## Report this to the I2O RAID Utilities lists. ## +-## --------------------------------------------- ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 +- ;; +-esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- eval "$as_ac_Header=\$ac_header_preproc" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5 ++$as_echo "$ac_cv_prog_gcc_traditional" >&6; } ++ if test $ac_cv_prog_gcc_traditional = yes; then ++ CC="$CC -traditional" ++ fi + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +-fi +-if test `eval echo '${'$as_ac_Header'}'` = yes; then ++for ac_header in stdlib.h ++do : ++ ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" ++if test "x$ac_cv_header_stdlib_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++#define HAVE_STDLIB_H 1 + _ACEOF + + fi + + done + +-ac_ext=cc +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +- +- +- +- +- +- +- +- +- +- +-for ac_header in strstream.h sstream fstream.h fstream iostream.h iostream iomanip.h iomanip +-do +-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5 ++$as_echo_n "checking for GNU libc compatible malloc... " >&6; } ++if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_cxx_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_header_compiler=yes ++ if test "$cross_compiling" = yes; then : ++ ac_cv_func_malloc_0_nonnull=no + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_header_compiler=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 +- +-# Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-#include <$ac_header> ++#if defined STDC_HEADERS || defined HAVE_STDLIB_H ++# include ++#else ++char *malloc (); ++#endif + -+dnl we can't use the lt_simple_compile_test_code here, -+dnl because it contains code intended for an executable, -+dnl not a library. It's possible we should let each -+dnl tag define a new lt_????_link_test_code variable, -+dnl but it's only used here... -+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF -+int a; -+void foo (void) { a = 0; } -+_LT_EOF -+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF -+class Foo ++int ++main () +{ -+public: -+ Foo (void) { a = 0; } -+private: -+ int a; -+}; -+_LT_EOF -+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF -+ subroutine foo -+ implicit none -+ integer*4 a -+ a=0 -+ return -+ end -+_LT_EOF -+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF -+ subroutine foo -+ implicit none -+ integer a -+ a=0 -+ return -+ end -+_LT_EOF -+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF -+public class foo { -+ private int a; -+ public void bar (void) { -+ a = 0; -+ } -+}; -+_LT_EOF -+]) -+dnl Parse the compiler output and extract the necessary -+dnl objects, libraries and library flags. -+if AC_TRY_EVAL(ac_compile); then -+ # Parse the compiler output and extract the necessary -+ # objects, libraries and library flags. -+ -+ # Sentinel used to keep track of whether or not we are before -+ # the conftest object file. -+ pre_test_object_deps_done=no -+ -+ for p in `eval "$output_verbose_link_cmd"`; do -+ case $p in -+ -+ -L* | -R* | -l*) -+ # Some compilers place space between "-{L,R}" and the path. -+ # Remove the space. -+ if test $p = "-L" || -+ test $p = "-R"; then -+ prev=$p -+ continue -+ else -+ prev= -+ fi -+ -+ if test "$pre_test_object_deps_done" = no; then -+ case $p in -+ -L* | -R*) -+ # Internal compiler library paths should come after those -+ # provided the user. The postdeps already come after the -+ # user supplied libs so there is no need to process them. -+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then -+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" -+ else -+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" -+ fi -+ ;; -+ # The "-l" case would never come before the object being -+ # linked, so don't bother handling this case. -+ esac -+ else -+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then -+ _LT_TAGVAR(postdeps, $1)="${prev}${p}" -+ else -+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" -+ fi -+ fi -+ ;; -+ -+ *.$objext) -+ # This assumes that the test object file only shows up -+ # once in the compiler output. -+ if test "$p" = "conftest.$objext"; then -+ pre_test_object_deps_done=yes -+ continue -+ fi -+ -+ if test "$pre_test_object_deps_done" = no; then -+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then -+ _LT_TAGVAR(predep_objects, $1)="$p" -+ else -+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" -+ fi -+ else -+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then -+ _LT_TAGVAR(postdep_objects, $1)="$p" -+ else -+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" -+ fi -+ fi -+ ;; -+ -+ *) ;; # Ignore the rest. -+ -+ esac -+ done -+ -+ # Clean up. -+ rm -f a.out a.exe -+else -+ echo "libtool.m4: error: problem compiling $1 test program" ++return ! malloc (0); ++ ; ++ return 0; ++} + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_cxx_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag +- else +- ac_cpp_err= +- fi ++if ac_fn_c_try_run "$LINENO"; then : ++ ac_cv_func_malloc_0_nonnull=yes + else +- ac_cpp_err=yes ++ ac_cv_func_malloc_0_nonnull=no +fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext + fi +-if test -z "$ac_cpp_err"; then +- ac_header_preproc=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_header_preproc=no + fi +-rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5 ++$as_echo "$ac_cv_func_malloc_0_nonnull" >&6; } ++if test $ac_cv_func_malloc_0_nonnull = yes; then : + -+$RM -f confest.$objext -+ -+# PORTME: override above test on systems where it is broken -+m4_if([$1], [CXX], -+[case $host_os in -+interix[[3-9]]*) -+ # Interix 3.5 installs completely hosed .la files for C++, so rather than -+ # hack all around it, let's just trust "g++" to DTRT. -+ _LT_TAGVAR(predep_objects,$1)= -+ _LT_TAGVAR(postdep_objects,$1)= -+ _LT_TAGVAR(postdeps,$1)= -+ ;; -+ -+linux*) -+ case `$CC -V 2>&1 | sed 5q` in -+ *Sun\ C*) -+ # Sun C++ 5.9 -+ -+ # The more standards-conforming stlport4 library is -+ # incompatible with the Cstd library. Avoid specifying -+ # it if it's in CXXFLAGS. Ignore libCrun as -+ # -library=stlport4 depends on it. -+ case " $CXX $CXXFLAGS " in -+ *" -library=stlport4 "*) -+ solaris_use_stlport4=yes -+ ;; -+ esac -+ -+ if test "$solaris_use_stlport4" != yes; then -+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' -+ fi -+ ;; -+ esac -+ ;; -+ -+solaris*) -+ case $cc_basename in -+ CC*) -+ # The more standards-conforming stlport4 library is -+ # incompatible with the Cstd library. Avoid specifying -+ # it if it's in CXXFLAGS. Ignore libCrun as -+ # -library=stlport4 depends on it. -+ case " $CXX $CXXFLAGS " in -+ *" -library=stlport4 "*) -+ solaris_use_stlport4=yes -+ ;; -+ esac -+ -+ # Adding this requires a known-good setup of shared libraries for -+ # Sun compiler versions before 5.6, else PIC objects from an old -+ # archive will be linked into the output, leading to subtle bugs. -+ if test "$solaris_use_stlport4" != yes; then -+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' -+ fi -+ ;; -+ esac -+ ;; -+esac -+]) -+ -+case " $_LT_TAGVAR(postdeps, $1) " in -+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; ++$as_echo "#define HAVE_MALLOC 1" >>confdefs.h + +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in +- yes:no: ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## --------------------------------------------- ## +-## Report this to the I2O RAID Utilities lists. ## +-## --------------------------------------------- ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 +- ;; +-esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- eval "$as_ac_Header=\$ac_header_preproc" +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ $as_echo "#define HAVE_MALLOC 0" >>confdefs.h + +-fi +-if test `eval echo '${'$as_ac_Header'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +-_ACEOF ++ case " $LIBOBJS " in ++ *" malloc.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS malloc.$ac_objext" ++ ;; +esac -+ _LT_TAGVAR(compiler_lib_search_dirs, $1)= -+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then -+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -+fi -+_LT_TAGDECL([], [compiler_lib_search_dirs], [1], -+ [The directories searched by this compiler when creating a shared library]) -+_LT_TAGDECL([], [predep_objects], [1], -+ [Dependencies to place before and after the objects being linked to -+ create a shared library]) -+_LT_TAGDECL([], [postdep_objects], [1]) -+_LT_TAGDECL([], [predeps], [1]) -+_LT_TAGDECL([], [postdeps], [1]) -+_LT_TAGDECL([], [compiler_lib_search_path], [1], -+ [The library search path used internally by the compiler when linking -+ a shared library]) -+])# _LT_SYS_HIDDEN_LIBDEPS -+ -+ -+# _LT_PROG_F77 -+# ------------ -+# Since AC_PROG_F77 is broken, in that it returns the empty string -+# if there is no fortran compiler, we have our own version here. -+m4_defun([_LT_PROG_F77], -+[ -+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) -+AC_PROG_F77 -+if test -z "$F77" || test "X$F77" = "Xno"; then -+ _lt_disable_F77=yes + +-fi + +-done ++$as_echo "#define malloc rpl_malloc" >>confdefs.h + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +fi -+popdef([AC_MSG_ERROR]) -+])# _LT_PROG_F77 -+ -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([_LT_PROG_F77], []) -+ -+ -+# _LT_LANG_F77_CONFIG([TAG]) -+# -------------------------- -+# Ensure that the configuration variables for a Fortran 77 compiler are -+# suitably defined. These variables are subsequently used by _LT_CONFIG -+# to write the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_F77_CONFIG], -+[AC_REQUIRE([_LT_PROG_F77])dnl -+AC_LANG_PUSH(Fortran 77) -+ -+_LT_TAGVAR(archive_cmds_need_lc, $1)=no -+_LT_TAGVAR(allow_undefined_flag, $1)= -+_LT_TAGVAR(always_export_symbols, $1)=no -+_LT_TAGVAR(archive_expsym_cmds, $1)= -+_LT_TAGVAR(export_dynamic_flag_spec, $1)= -+_LT_TAGVAR(hardcode_direct, $1)=no -+_LT_TAGVAR(hardcode_direct_absolute, $1)=no -+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -+_LT_TAGVAR(hardcode_libdir_separator, $1)= -+_LT_TAGVAR(hardcode_minus_L, $1)=no -+_LT_TAGVAR(hardcode_automatic, $1)=no -+_LT_TAGVAR(inherit_rpath, $1)=no -+_LT_TAGVAR(module_cmds, $1)= -+_LT_TAGVAR(module_expsym_cmds, $1)= -+_LT_TAGVAR(link_all_deplibs, $1)=unknown -+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -+_LT_TAGVAR(no_undefined_flag, $1)= -+_LT_TAGVAR(whole_archive_flag_spec, $1)= -+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no -+ -+# Source file extension for f77 test sources. -+ac_ext=f -+ -+# Object file extension for compiled f77 test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext -+ -+# No sense in running all these tests if we already determined that -+# the F77 compiler isn't working. Some variables (like enable_shared) -+# are currently assumed to apply to all compilers on this platform, -+# and will be corrupted by setting them based on a non-working compiler. -+if test "$_lt_disable_F77" != yes; then -+ # Code to be used in simple compile tests -+ lt_simple_compile_test_code="\ -+ subroutine t -+ return -+ end -+" -+ -+ # Code to be used in simple link tests -+ lt_simple_link_test_code="\ -+ program t -+ end -+" -+ -+ # ltmain only uses $CC for tagged configurations so make sure $CC is set. -+ _LT_TAG_COMPILER -+ -+ # save warnings/boilerplate of simple test code -+ _LT_COMPILER_BOILERPLATE -+ _LT_LINKER_BOILERPLATE -+ -+ # Allow CC to be a program name with arguments. -+ lt_save_CC="$CC" -+ lt_save_GCC=$GCC -+ CC=${F77-"f77"} -+ compiler=$CC -+ _LT_TAGVAR(compiler, $1)=$CC -+ _LT_CC_BASENAME([$compiler]) -+ GCC=$G77 -+ if test -n "$compiler"; then -+ AC_MSG_CHECKING([if libtool supports shared libraries]) -+ AC_MSG_RESULT([$can_build_shared]) -+ -+ AC_MSG_CHECKING([whether to build shared libraries]) -+ test "$can_build_shared" = "no" && enable_shared=no -+ -+ # On AIX, shared libraries and static libraries use the same namespace, and -+ # are all built from PIC. -+ case $host_os in -+ aix3*) -+ test "$enable_shared" = yes && enable_static=no -+ if test -n "$RANLIB"; then -+ archive_cmds="$archive_cmds~\$RANLIB \$lib" -+ postinstall_cmds='$RANLIB $lib' -+ fi -+ ;; -+ aix[[4-9]]*) -+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then -+ test "$enable_shared" = yes && enable_static=no -+ fi -+ ;; -+ esac -+ AC_MSG_RESULT([$enable_shared]) -+ -+ AC_MSG_CHECKING([whether to build static libraries]) -+ # Make sure either enable_shared or enable_static is yes. -+ test "$enable_shared" = yes || enable_static=yes -+ AC_MSG_RESULT([$enable_static]) -+ -+ _LT_TAGVAR(GCC, $1)="$G77" -+ _LT_TAGVAR(LD, $1)="$LD" -+ -+ ## CAVEAT EMPTOR: -+ ## There is no encapsulation within the following macros, do not change -+ ## the running order or otherwise move them around unless you know exactly -+ ## what you are doing... -+ _LT_COMPILER_PIC($1) -+ _LT_COMPILER_C_O($1) -+ _LT_COMPILER_FILE_LOCKS($1) -+ _LT_LINKER_SHLIBS($1) -+ _LT_SYS_DYNAMIC_LINKER($1) -+ _LT_LINKER_HARDCODE_LIBPATH($1) -+ -+ _LT_CONFIG($1) -+ fi # test -n "$compiler" -+ -+ GCC=$lt_save_GCC -+ CC="$lt_save_CC" -+fi # test "$_lt_disable_F77" != yes -+ -+AC_LANG_POP -+])# _LT_LANG_F77_CONFIG -+ -+ -+# _LT_PROG_FC -+# ----------- -+# Since AC_PROG_FC is broken, in that it returns the empty string -+# if there is no fortran compiler, we have our own version here. -+m4_defun([_LT_PROG_FC], -+[ -+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) -+AC_PROG_FC -+if test -z "$FC" || test "X$FC" = "Xno"; then -+ _lt_disable_FC=yes + + +-# Checks for typedefs, structures, and compiler characteristics. +-echo "$as_me:$LINENO: checking whether stat file-mode macros are broken" >&5 +-echo $ECHO_N "checking whether stat file-mode macros are broken... $ECHO_C" >&6 +-if test "${ac_cv_header_stat_broken+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working memcmp" >&5 ++$as_echo_n "checking for working memcmp... " >&6; } ++if test "${ac_cv_func_memcmp_working+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ if test "$cross_compiling" = yes; then : ++ ac_cv_func_memcmp_working=no ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-#include +-#include +- +-#if defined(S_ISBLK) && defined(S_IFDIR) +-# if S_ISBLK (S_IFDIR) +-You lose. +-# endif +-#endif +- +-#if defined(S_ISBLK) && defined(S_IFCHR) +-# if S_ISBLK (S_IFCHR) +-You lose. +-# endif +-#endif ++$ac_includes_default ++int ++main () ++{ + +-#if defined(S_ISLNK) && defined(S_IFREG) +-# if S_ISLNK (S_IFREG) +-You lose. +-# endif +-#endif ++ /* Some versions of memcmp are not 8-bit clean. */ ++ char c0 = '\100', c1 = '\200', c2 = '\201'; ++ if (memcmp(&c0, &c2, 1) >= 0 || memcmp(&c1, &c2, 1) >= 0) ++ return 1; + +-#if defined(S_ISSOCK) && defined(S_IFREG) +-# if S_ISSOCK (S_IFREG) +-You lose. +-# endif +-#endif ++ /* The Next x86 OpenStep bug shows up only when comparing 16 bytes ++ or more and with at least one buffer not starting on a 4-byte boundary. ++ William Lewis provided this test program. */ ++ { ++ char foo[21]; ++ char bar[21]; ++ int i; ++ for (i = 0; i < 4; i++) ++ { ++ char *a = foo + i; ++ char *b = bar + i; ++ strcpy (a, "--------01111111"); ++ strcpy (b, "--------10000000"); ++ if (memcmp (a, b, 16) >= 0) ++ return 1; ++ } ++ return 0; ++ } + ++ ; ++ return 0; ++} + _ACEOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "You lose" >/dev/null 2>&1; then +- ac_cv_header_stat_broken=yes ++if ac_fn_c_try_run "$LINENO"; then : ++ ac_cv_func_memcmp_working=yes + else +- ac_cv_header_stat_broken=no ++ ac_cv_func_memcmp_working=no +fi -+popdef([AC_MSG_ERROR]) -+])# _LT_PROG_FC -+ -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([_LT_PROG_FC], []) -+ -+ -+# _LT_LANG_FC_CONFIG([TAG]) -+# ------------------------- -+# Ensure that the configuration variables for a Fortran compiler are -+# suitably defined. These variables are subsequently used by _LT_CONFIG -+# to write the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_FC_CONFIG], -+[AC_REQUIRE([_LT_PROG_FC])dnl -+AC_LANG_PUSH(Fortran) ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext + fi +-rm -f conftest* + + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stat_broken" >&5 +-echo "${ECHO_T}$ac_cv_header_stat_broken" >&6 +-if test $ac_cv_header_stat_broken = yes; then ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_memcmp_working" >&5 ++$as_echo "$ac_cv_func_memcmp_working" >&6; } ++test $ac_cv_func_memcmp_working = no && case " $LIBOBJS " in ++ *" memcmp.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS memcmp.$ac_objext" ++ ;; ++esac + +-cat >>confdefs.h <<\_ACEOF +-#define STAT_MACROS_BROKEN 1 + -+_LT_TAGVAR(archive_cmds_need_lc, $1)=no -+_LT_TAGVAR(allow_undefined_flag, $1)= -+_LT_TAGVAR(always_export_symbols, $1)=no -+_LT_TAGVAR(archive_expsym_cmds, $1)= -+_LT_TAGVAR(export_dynamic_flag_spec, $1)= -+_LT_TAGVAR(hardcode_direct, $1)=no -+_LT_TAGVAR(hardcode_direct_absolute, $1)=no -+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -+_LT_TAGVAR(hardcode_libdir_separator, $1)= -+_LT_TAGVAR(hardcode_minus_L, $1)=no -+_LT_TAGVAR(hardcode_automatic, $1)=no -+_LT_TAGVAR(inherit_rpath, $1)=no -+_LT_TAGVAR(module_cmds, $1)= -+_LT_TAGVAR(module_expsym_cmds, $1)= -+_LT_TAGVAR(link_all_deplibs, $1)=unknown -+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -+_LT_TAGVAR(no_undefined_flag, $1)= -+_LT_TAGVAR(whole_archive_flag_spec, $1)= -+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++for ac_header in stdlib.h ++do : ++ ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" ++if test "x$ac_cv_header_stdlib_h" = x""yes; then : ++ cat >>confdefs.h <<_ACEOF ++#define HAVE_STDLIB_H 1 + _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5 +-echo $ECHO_N "checking for stdbool.h that conforms to C99... $ECHO_C" >&6 +-if test "${ac_cv_header_stdbool_h+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++done + -+# Source file extension for fc test sources. -+ac_ext=${ac_fc_srcext-f} ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible realloc" >&5 ++$as_echo_n "checking for GNU libc compatible realloc... " >&6; } ++if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ if test "$cross_compiling" = yes; then : ++ ac_cv_func_realloc_0_nonnull=no ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +- +-#include +-#ifndef bool +-# error bool is not defined +-#endif +-#ifndef false +-# error false is not defined +-#endif +-#if false +-# error false is not 0 +-#endif +-#ifndef true +-# error true is not defined +-#endif +-#if true != 1 +-# error true is not 1 +-#endif +-#ifndef __bool_true_false_are_defined +-# error __bool_true_false_are_defined is not defined ++#if defined STDC_HEADERS || defined HAVE_STDLIB_H ++# include ++#else ++char *realloc (); + #endif + +- struct s { _Bool s: 1; _Bool t; } s; +- +- char a[true == 1 ? 1 : -1]; +- char b[false == 0 ? 1 : -1]; +- char c[__bool_true_false_are_defined == 1 ? 1 : -1]; +- char d[(bool) -0.5 == true ? 1 : -1]; +- bool e = &s; +- char f[(_Bool) -0.0 == false ? 1 : -1]; +- char g[true]; +- char h[sizeof (_Bool)]; +- char i[sizeof s.t]; +- + int + main () + { +- return !a + !b + !c + !d + !e + !f + !g + !h + !i; ++return ! realloc (0, 0); + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_header_stdbool_h=yes ++if ac_fn_c_try_run "$LINENO"; then : ++ ac_cv_func_realloc_0_nonnull=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ac_cv_func_realloc_0_nonnull=no ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext ++fi + +-ac_cv_header_stdbool_h=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_realloc_0_nonnull" >&5 ++$as_echo "$ac_cv_func_realloc_0_nonnull" >&6; } ++if test $ac_cv_func_realloc_0_nonnull = yes; then : + -+# Object file extension for compiled fc test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext ++$as_echo "#define HAVE_REALLOC 1" >>confdefs.h + -+# No sense in running all these tests if we already determined that -+# the FC compiler isn't working. Some variables (like enable_shared) -+# are currently assumed to apply to all compilers on this platform, -+# and will be corrupted by setting them based on a non-working compiler. -+if test "$_lt_disable_FC" != yes; then -+ # Code to be used in simple compile tests -+ lt_simple_compile_test_code="\ -+ subroutine t -+ return -+ end -+" ++else ++ $as_echo "#define HAVE_REALLOC 0" >>confdefs.h + -+ # Code to be used in simple link tests -+ lt_simple_link_test_code="\ -+ program t -+ end -+" ++ case " $LIBOBJS " in ++ *" realloc.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS realloc.$ac_objext" ++ ;; ++esac + -+ # ltmain only uses $CC for tagged configurations so make sure $CC is set. -+ _LT_TAG_COMPILER + -+ # save warnings/boilerplate of simple test code -+ _LT_COMPILER_BOILERPLATE -+ _LT_LINKER_BOILERPLATE ++$as_echo "#define realloc rpl_realloc" >>confdefs.h + -+ # Allow CC to be a program name with arguments. -+ lt_save_CC="$CC" -+ lt_save_GCC=$GCC -+ CC=${FC-"f95"} -+ compiler=$CC -+ GCC=$ac_cv_fc_compiler_gnu + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5 +-echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6 +-echo "$as_me:$LINENO: checking for _Bool" >&5 +-echo $ECHO_N "checking for _Bool... $ECHO_C" >&6 +-if test "${ac_cv_type__Bool+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 + -+ _LT_TAGVAR(compiler, $1)=$CC -+ _LT_CC_BASENAME([$compiler]) + -+ if test -n "$compiler"; then -+ AC_MSG_CHECKING([if libtool supports shared libraries]) -+ AC_MSG_RESULT([$can_build_shared]) + -+ AC_MSG_CHECKING([whether to build shared libraries]) -+ test "$can_build_shared" = "no" && enable_shared=no ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether lstat correctly handles trailing slash" >&5 ++$as_echo_n "checking whether lstat correctly handles trailing slash... " >&6; } ++if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ rm -f conftest.sym conftest.file ++echo >conftest.file ++if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then ++ if test "$cross_compiling" = yes; then : ++ ac_cv_func_lstat_dereferences_slashed_symlink=no + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ + $ac_includes_default + int + main () + { +-if ((_Bool *) 0) +- return 0; +-if (sizeof (_Bool)) +- return 0; ++struct stat sbuf; ++ /* Linux will dereference the symlink and fail, as required by POSIX. ++ That is better in the sense that it means we will not ++ have to compile and use the lstat wrapper. */ ++ return lstat ("conftest.sym/", &sbuf) == 0; + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_type__Bool=yes ++if ac_fn_c_try_run "$LINENO"; then : ++ ac_cv_func_lstat_dereferences_slashed_symlink=yes + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_type__Bool=no ++ ac_cv_func_lstat_dereferences_slashed_symlink=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5 +-echo "${ECHO_T}$ac_cv_type__Bool" >&6 +-if test $ac_cv_type__Bool = yes; then +- +-cat >>confdefs.h <<_ACEOF +-#define HAVE__BOOL 1 +-_ACEOF + ++else ++ # If the `ln -s' command failed, then we probably don't even ++ # have an lstat function. ++ ac_cv_func_lstat_dereferences_slashed_symlink=no ++fi ++rm -f conftest.sym conftest.file + + fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 ++$as_echo "$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; } + +-if test $ac_cv_header_stdbool_h = yes; then ++test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_STDBOOL_H 1 ++cat >>confdefs.h <<_ACEOF ++#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 + _ACEOF + + -+ # On AIX, shared libraries and static libraries use the same namespace, and -+ # are all built from PIC. -+ case $host_os in -+ aix3*) -+ test "$enable_shared" = yes && enable_static=no -+ if test -n "$RANLIB"; then -+ archive_cmds="$archive_cmds~\$RANLIB \$lib" -+ postinstall_cmds='$RANLIB $lib' -+ fi -+ ;; -+ aix[[4-9]]*) -+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then -+ test "$enable_shared" = yes && enable_static=no -+ fi -+ ;; -+ esac -+ AC_MSG_RESULT([$enable_shared]) ++if test "x$ac_cv_func_lstat_dereferences_slashed_symlink" = xno; then ++ case " $LIBOBJS " in ++ *" lstat.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS lstat.$ac_objext" ++ ;; ++esac + -+ AC_MSG_CHECKING([whether to build static libraries]) -+ # Make sure either enable_shared or enable_static is yes. -+ test "$enable_shared" = yes || enable_static=yes -+ AC_MSG_RESULT([$enable_static]) + fi + +-echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +-echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 +-if test "${ac_cv_c_const+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat accepts an empty string" >&5 ++$as_echo_n "checking whether stat accepts an empty string... " >&6; } ++if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then : ++ $as_echo_n "(cached) " >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ if test "$cross_compiling" = yes; then : ++ ac_cv_func_stat_empty_string_bug=yes ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +- ++$ac_includes_default + int + main () + { +-/* FIXME: Include the comments suggested by Paul. */ +-#ifndef __cplusplus +- /* Ultrix mips cc rejects this. */ +- typedef int charset[2]; +- const charset x; +- /* SunOS 4.1.1 cc rejects this. */ +- char const *const *ccp; +- char **p; +- /* NEC SVR4.0.2 mips cc rejects this. */ +- struct point {int x, y;}; +- static struct point const zero = {0,0}; +- /* AIX XL C 1.02.0.0 rejects this. +- It does not let you subtract one const X* pointer from another in +- an arm of an if-expression whose if-part is not a constant +- expression */ +- const char *g = "string"; +- ccp = &g + (g ? g-g : 0); +- /* HPUX 7.0 cc rejects these. */ +- ++ccp; +- p = (char**) ccp; +- ccp = (char const *const *) p; +- { /* SCO 3.2v4 cc rejects this. */ +- char *t; +- char const *s = 0 ? (char *) 0 : (char const *) 0; +- +- *t++ = 0; +- } +- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ +- int x[] = {25, 17}; +- const int *foo = &x[0]; +- ++foo; +- } +- { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ +- typedef const int *iptr; +- iptr p = 0; +- ++p; +- } +- { /* AIX XL C 1.02.0.0 rejects this saying +- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ +- struct s { int j; const int *ap[3]; }; +- struct s *b; b->j = 5; +- } +- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ +- const int foo = 10; +- } +-#endif +- ++struct stat sbuf; ++ return stat ("", &sbuf) == 0; + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_c_const=yes ++if ac_fn_c_try_run "$LINENO"; then : ++ ac_cv_func_stat_empty_string_bug=no + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_c_const=no ++ ac_cv_func_stat_empty_string_bug=yes + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ ++ conftest.$ac_objext conftest.beam conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +-echo "${ECHO_T}$ac_cv_c_const" >&6 +-if test $ac_cv_c_const = no; then + +-cat >>confdefs.h <<\_ACEOF +-#define const ++fi ++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_stat_empty_string_bug" >&5 ++$as_echo "$ac_cv_func_stat_empty_string_bug" >&6; } ++if test $ac_cv_func_stat_empty_string_bug = yes; then ++ case " $LIBOBJS " in ++ *" stat.$ac_objext "* ) ;; ++ *) LIBOBJS="$LIBOBJS stat.$ac_objext" ++ ;; ++esac + -+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" -+ _LT_TAGVAR(LD, $1)="$LD" + -+ ## CAVEAT EMPTOR: -+ ## There is no encapsulation within the following macros, do not change -+ ## the running order or otherwise move them around unless you know exactly -+ ## what you are doing... -+ _LT_SYS_HIDDEN_LIBDEPS($1) -+ _LT_COMPILER_PIC($1) -+ _LT_COMPILER_C_O($1) -+ _LT_COMPILER_FILE_LOCKS($1) -+ _LT_LINKER_SHLIBS($1) -+ _LT_SYS_DYNAMIC_LINKER($1) -+ _LT_LINKER_HARDCODE_LIBPATH($1) ++cat >>confdefs.h <<_ACEOF ++#define HAVE_STAT_EMPTY_STRING_BUG 1 + _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for inline" >&5 +-echo $ECHO_N "checking for inline... $ECHO_C" >&6 +-if test "${ac_cv_c_inline+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_cv_c_inline=no +-for ac_kw in inline __inline__ __inline; do +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++for ac_func in vprintf ++do : ++ ac_fn_c_check_func "$LINENO" "vprintf" "ac_cv_func_vprintf" ++if test "x$ac_cv_func_vprintf" = x""yes; then : ++ cat >>confdefs.h <<_ACEOF ++#define HAVE_VPRINTF 1 + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#ifndef __cplusplus +-typedef int foo_t; +-static $ac_kw foo_t static_foo () {return 0; } +-$ac_kw foo_t foo () {return 0; } +-#endif + +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_c_inline=$ac_kw; break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ac_fn_c_check_func "$LINENO" "_doprnt" "ac_cv_func__doprnt" ++if test "x$ac_cv_func__doprnt" = x""yes; then : + -+ _LT_CONFIG($1) -+ fi # test -n "$compiler" ++$as_echo "#define HAVE_DOPRNT 1" >>confdefs.h + + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done + + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 +-echo "${ECHO_T}$ac_cv_c_inline" >&6 ++done + + +-case $ac_cv_c_inline in +- inline | yes) ;; +- *) +- case $ac_cv_c_inline in +- no) ac_val=;; +- *) ac_val=$ac_cv_c_inline;; +- esac +- cat >>confdefs.h <<_ACEOF +-#ifndef __cplusplus +-#define inline $ac_val +-#endif ++for ac_func in alarm atexit dup2 memset strchr strcspn strpbrk strrchr strspn strstr strtol strtoul sysinfo uname ++do : ++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" ++if eval test \"x\$"$as_ac_var"\" = x"yes"; then : ++ cat >>confdefs.h <<_ACEOF ++#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF +- ;; +-esac + +-echo "$as_me:$LINENO: checking for pid_t" >&5 +-echo $ECHO_N "checking for pid_t... $ECHO_C" >&6 +-if test "${ac_cv_type_pid_t+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++done + -+ GCC=$lt_save_GCC -+ CC="$lt_save_CC" -+fi # test "$_lt_disable_FC" != yes + -+AC_LANG_POP -+])# _LT_LANG_FC_CONFIG ++if test "x$CC" != xcc; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5 ++$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF ++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5 ++$as_echo_n "checking whether cc understands -c and -o together... " >&6; } ++fi ++set dummy $CC; ac_cc=`$as_echo "$2" | ++ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\"" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext + /* end confdefs.h. */ +-$ac_includes_default + + int + main () + { +-if ((pid_t *) 0) +- return 0; +-if (sizeof (pid_t)) +- return 0; + -+# _LT_LANG_GCJ_CONFIG([TAG]) -+# -------------------------- -+# Ensure that the configuration variables for the GNU Java Compiler compiler -+# are suitably defined. These variables are subsequently used by _LT_CONFIG -+# to write the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_GCJ_CONFIG], -+[AC_REQUIRE([LT_PROG_GCJ])dnl -+AC_LANG_SAVE + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++# Make sure it works both with $CC and with simple cc. ++# We do the test twice because some compilers refuse to overwrite an ++# existing .o file with -o, though they will create one. ++ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++rm -f conftest2.* ++if { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && ++ test -f conftest2.$ac_objext && { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_type_pid_t=yes ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; ++then ++ eval ac_cv_prog_cc_${ac_cc}_c_o=yes ++ if test "x$CC" != xcc; then ++ # Test first that cc exists at all. ++ if { ac_try='cc -c conftest.$ac_ext >&5' ++ { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; }; then ++ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' ++ rm -f conftest2.* ++ if { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; } && ++ test -f conftest2.$ac_objext && { { case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" ++$as_echo "$ac_try_echo"; } >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; ++ then ++ # cc works too. ++ : ++ else ++ # cc exists but doesn't like -o. ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no ++ fi ++ fi ++ fi + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_cv_type_pid_t=no ++ eval ac_cv_prog_cc_${ac_cc}_c_o=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++rm -f core conftest* + -+# Source file extension for Java test sources. -+ac_ext=java + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 +-echo "${ECHO_T}$ac_cv_type_pid_t" >&6 +-if test $ac_cv_type_pid_t = yes; then +- : ++if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } + else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } + +-cat >>confdefs.h <<_ACEOF +-#define pid_t int +-_ACEOF ++$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h + + fi + +-echo "$as_me:$LINENO: checking for size_t" >&5 +-echo $ECHO_N "checking for size_t... $ECHO_C" >&6 +-if test "${ac_cv_type_size_t+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-int +-main () +-{ +-if ((size_t *) 0) +- return 0; +-if (sizeof (size_t)) +- return 0; +- ; +- return 0; +-} ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o ++if test "$am_t" != yes; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi + -+# Object file extension for compiled Java test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext + -+# Code to be used in simple compile tests -+lt_simple_compile_test_code="class foo {}" + -+# Code to be used in simple link tests -+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' ++ac_config_files="$ac_config_files Makefile raideng/Makefile raidutil/Makefile lib/Makefile distribution/raidutils.spec" + -+# ltmain only uses $CC for tagged configurations so make sure $CC is set. -+_LT_TAG_COMPILER ++cat >confcache <<\_ACEOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. ++# ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. ++# ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. + -+# save warnings/boilerplate of simple test code -+_LT_COMPILER_BOILERPLATE -+_LT_LINKER_BOILERPLATE + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_type_size_t=yes + -+# Allow CC to be a program name with arguments. -+lt_save_CC="$CC" -+lt_save_GCC=$GCC -+GCC=yes -+CC=${GCJ-"gcj"} -+compiler=$CC -+_LT_TAGVAR(compiler, $1)=$CC -+_LT_TAGVAR(LD, $1)="$LD" -+_LT_CC_BASENAME([$compiler]) ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, we kill variables containing newlines. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^$[a-zA-Z_][a-zA-Z0-9_]*$=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 ++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( ++ *) { eval $ac_var=; unset $ac_var;} ;; ++ esac ;; ++ esac ++ done + -+# GCJ did not exist at the time GCC didn't implicitly link libc in. -+_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ (set) 2>&1 | ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ # `set' does not quote correctly, so add quotes: double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \. ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='\\2'/p" ++ ;; #( ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) | ++ sed ' ++ /^ac_cv_env_/b end ++ t clear ++ :clear ++ s/^$[^=]*$=$.*[{}].*$$/test "${\1+set}" = set || &/ ++ t end ++ s/^$[^=]*$=$.*$$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 ++$as_echo "$as_me: updating cache $cache_file" >&6;} ++ cat confcache >$cache_file ++ else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 ++$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ fi ++fi ++rm -f confcache + -+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++# Let make expand exec_prefix. ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + -+## CAVEAT EMPTOR: -+## There is no encapsulation within the following macros, do not change -+## the running order or otherwise move them around unless you know exactly -+## what you are doing... -+if test -n "$compiler"; then -+ _LT_COMPILER_NO_RTTI($1) -+ _LT_COMPILER_PIC($1) -+ _LT_COMPILER_C_O($1) -+ _LT_COMPILER_FILE_LOCKS($1) -+ _LT_LINKER_SHLIBS($1) -+ _LT_LINKER_HARDCODE_LIBPATH($1) ++DEFS=-DHAVE_CONFIG_H + -+ _LT_CONFIG($1) -+fi ++ac_libobjs= ++ac_ltlibobjs= ++U= ++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue ++ # 1. Remove the extension, and $U if already installed. ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`$as_echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' ++done ++LIBOBJS=$ac_libobjs + -+AC_LANG_RESTORE ++LTLIBOBJS=$ac_ltlibobjs + -+GCC=$lt_save_GCC -+CC="$lt_save_CC" -+])# _LT_LANG_GCJ_CONFIG + ++ if test -n "$EXEEXT"; then ++ am__EXEEXT_TRUE= ++ am__EXEEXT_FALSE='#' + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ am__EXEEXT_TRUE='#' ++ am__EXEEXT_FALSE= ++fi + +-ac_cv_type_size_t=no ++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then ++ as_fn_error $? "conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then ++ as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 +-echo "${ECHO_T}$ac_cv_type_size_t" >&6 +-if test $ac_cv_type_size_t = yes; then +- : +-else ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ as_fn_error $? "conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi ++if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then ++ as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi + -+# _LT_LANG_RC_CONFIG([TAG]) -+# ------------------------- -+# Ensure that the configuration variables for the Windows resource compiler -+# are suitably defined. These variables are subsequently used by _LT_CONFIG -+# to write the compiler configuration to `libtool'. -+m4_defun([_LT_LANG_RC_CONFIG], -+[AC_REQUIRE([LT_PROG_RC])dnl -+AC_LANG_SAVE ++: ${CONFIG_STATUS=./config.status} ++ac_write_fail=0 ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files $CONFIG_STATUS" ++{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 ++$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} ++as_write_fail=0 ++cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate the current configuration. ++# Compiler output produced by configure, useful for debugging ++# configure, is in config.log if it exists. + +-cat >>confdefs.h <<_ACEOF +-#define size_t unsigned +-_ACEOF ++debug=false ++ac_cs_recheck=false ++ac_cs_silent=false + +-fi ++SHELL=\${CONFIG_SHELL-$SHELL} ++export SHELL ++_ASEOF ++cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ++## -------------------- ## ++## M4sh Initialization. ## ++## -------------------- ## + +-echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 +-echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6 +-if test "${ac_cv_header_time+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : ++ emulate sh ++ NULLCMD=: ++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-#include +-#include ++ case `(set -o) 2>/dev/null` in #( ++ *posix*) : ++ set -o posix ;; #( ++ *) : ++ ;; ++esac ++fi + +-int +-main () +-{ +-if ((struct tm *) 0) +-return 0; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_header_time=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_header_time=no ++as_nl=' ++' ++export as_nl ++# Printing a long string crashes Solaris 7 /usr/bin/printf. ++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo ++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo ++# Prefer a ksh shell builtin over an external printf program on Solaris, ++# but without wasting forks for bash or zsh. ++if test -z "$BASH_VERSION$ZSH_VERSION" \ ++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='print -r --' ++ as_echo_n='print -rn --' ++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then ++ as_echo='printf %s\n' ++ as_echo_n='printf %s' ++else ++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then ++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ++ as_echo_n='/usr/ucb/echo -n' ++ else ++ as_echo_body='eval expr "X$1" : "X\$.*\$"' ++ as_echo_n_body='eval ++ arg=$1; ++ case $arg in #( ++ *"$as_nl"*) ++ expr "X$arg" : "X\$.*\$$as_nl"; ++ arg=`expr "X$arg" : ".*$as_nl\$.*\$"`;; ++ esac; ++ expr "X$arg" : "X\$.*\$" | tr -d "$as_nl" ++ ' ++ export as_echo_n_body ++ as_echo_n='sh -c $as_echo_n_body as_echo' ++ fi ++ export as_echo_body ++ as_echo='sh -c $as_echo_body as_echo' + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + -+# Source file extension for RC test sources. -+ac_ext=rc ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ PATH_SEPARATOR=: ++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { ++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || ++ PATH_SEPARATOR=';' ++ } + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 +-echo "${ECHO_T}$ac_cv_header_time" >&6 +-if test $ac_cv_header_time = yes; then + +-cat >>confdefs.h <<\_ACEOF +-#define TIME_WITH_SYS_TIME 1 +-_ACEOF + +-fi ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++IFS=" "" $as_nl" + -+# Object file extension for compiled RC test sources. -+objext=o -+_LT_TAGVAR(objext, $1)=$objext ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in #(( ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++ done ++IFS=$as_save_IFS + +-echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 +-echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6 +-if test "${ac_cv_struct_tm+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-#include ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ exit 1 ++fi + -+# Code to be used in simple compile tests -+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' ++# Unset variables that we do not need and which cause bugs (e.g. in ++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" ++# suppresses any "Segmentation fault" message there. '((' could ++# trigger a bug in pdksh 5.2.14. ++for as_var in BASH_ENV ENV MAIL MAILPATH ++do eval test x\${$as_var+set} = xset \ ++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' + +-int +-main () +-{ +-struct tm *tp; tp->tm_sec; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_struct_tm=time.h +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# NLS nuisances. ++LC_ALL=C ++export LC_ALL ++LANGUAGE=C ++export LANGUAGE + +-ac_cv_struct_tm=sys/time.h +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 +-echo "${ECHO_T}$ac_cv_struct_tm" >&6 +-if test $ac_cv_struct_tm = sys/time.h; then ++# CDPATH. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +-cat >>confdefs.h <<\_ACEOF +-#define TM_IN_SYS_TIME 1 +-_ACEOF + +-fi ++# as_fn_error STATUS ERROR [LINENO LOG_FD] ++# ---------------------------------------- ++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are ++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ++# script with STATUS, using 1 if that was 0. ++as_fn_error () ++{ ++ as_status=$1; test $as_status -eq 0 && as_status=1 ++ if test "$4"; then ++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack ++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 ++ fi ++ $as_echo "$as_me: error: $2" >&2 ++ as_fn_exit $as_status ++} # as_fn_error + -+# Code to be used in simple link tests -+lt_simple_link_test_code="$lt_simple_compile_test_code" + -+# ltmain only uses $CC for tagged configurations so make sure $CC is set. -+_LT_TAG_COMPILER ++# as_fn_set_status STATUS ++# ----------------------- ++# Set $? to STATUS, without forking. ++as_fn_set_status () ++{ ++ return $1 ++} # as_fn_set_status + -+# save warnings/boilerplate of simple test code -+_LT_COMPILER_BOILERPLATE -+_LT_LINKER_BOILERPLATE ++# as_fn_exit STATUS ++# ----------------- ++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. ++as_fn_exit () ++{ ++ set +e ++ as_fn_set_status $1 ++ exit $1 ++} # as_fn_exit + -+# Allow CC to be a program name with arguments. -+lt_save_CC="$CC" -+lt_save_GCC=$GCC -+GCC= -+CC=${RC-"windres"} -+compiler=$CC -+_LT_TAGVAR(compiler, $1)=$CC -+_LT_CC_BASENAME([$compiler]) -+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++# as_fn_unset VAR ++# --------------- ++# Portably unset VAR. ++as_fn_unset () ++{ ++ { eval $1=; unset $1;} ++} ++as_unset=as_fn_unset ++# as_fn_append VAR VALUE ++# ---------------------- ++# Append the text in VALUE to the end of the definition contained in VAR. Take ++# advantage of any shell optimizations that allow amortized linear growth over ++# repeated appends, instead of the typical quadratic growth present in naive ++# implementations. ++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : ++ eval 'as_fn_append () ++ { ++ eval $1+=\$2 ++ }' ++else ++ as_fn_append () ++ { ++ eval $1=\$$1\$2 ++ } ++fi # as_fn_append + +-echo "$as_me:$LINENO: checking for working volatile" >&5 +-echo $ECHO_N "checking for working volatile... $ECHO_C" >&6 +-if test "${ac_cv_c_volatile+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++# as_fn_arith ARG... ++# ------------------ ++# Perform arithmetic evaluation on the ARGs, and store the result in the ++# global $as_val. Take advantage of shells that can avoid forks. The arguments ++# must be portable across $(()) and expr. ++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : ++ eval 'as_fn_arith () ++ { ++ as_val=$(( $* )) ++ }' + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++ as_fn_arith () ++ { ++ as_val=`expr "$@" || test $? -eq 1` ++ } ++fi # as_fn_arith + +-int +-main () +-{ + +-volatile int x; +-int * volatile y; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_c_volatile=yes ++if expr a : '$a$' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*$...$'`" = X001; then ++ as_expr=expr + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ as_expr=false ++fi + +-ac_cv_c_volatile=no ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + -+if test -n "$compiler"; then -+ : -+ _LT_CONFIG($1) ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_volatile" >&5 +-echo "${ECHO_T}$ac_cv_c_volatile" >&6 +-if test $ac_cv_c_volatile = no; then + +-cat >>confdefs.h <<\_ACEOF +-#define volatile +-_ACEOF ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \ ++ X"$0" : 'X$//$$' \| \ ++ X"$0" : 'X$/$' \| . 2>/dev/null || ++$as_echo X/"$0" | ++ sed '/^.*\/$[^/][^/]*$\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/$\/\/$$/{ ++ s//\1/ ++ q ++ } ++ /^X\/$\/$.*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + +-fi ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits + ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in #((((( ++-n*) ++ case `echo 'xy\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ xy) ECHO_C='\c';; ++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ++ ECHO_T=' ';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac + +-# Checks for library functions. +-echo "$as_me:$LINENO: checking whether closedir returns void" >&5 +-echo $ECHO_N "checking whether closedir returns void... $ECHO_C" >&6 +-if test "${ac_cv_func_closedir_void+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file + else +- if test "$cross_compiling" = yes; then +- ac_cv_func_closedir_void=yes ++ rm -f conf$$.dir ++ mkdir conf$$.dir 2>/dev/null ++fi ++if (echo >conf$$.file) 2>/dev/null; then ++ if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++ elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln ++ else ++ as_ln_s='cp -p' ++ fi + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header_dirent> +-#ifndef __cplusplus +-int closedir (); +-#endif ++ as_ln_s='cp -p' +fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + +-int +-main () + -+GCC=$lt_save_GCC -+AC_LANG_RESTORE -+CC="$lt_save_CC" -+])# _LT_LANG_RC_CONFIG -+ -+ -+# LT_PROG_GCJ -+# ----------- -+AC_DEFUN([LT_PROG_GCJ], -+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], -+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], -+ [AC_CHECK_TOOL(GCJ, gcj,) -+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" -+ AC_SUBST(GCJFLAGS)])])[]dnl -+]) -+ -+# Old name: -+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([LT_AC_PROG_GCJ], []) -+ -+ -+# LT_PROG_RC -+# ---------- -+AC_DEFUN([LT_PROG_RC], -+[AC_CHECK_TOOL(RC, windres,) -+]) -+ -+# Old name: -+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([LT_AC_PROG_RC], []) -+ -+ -+# _LT_DECL_EGREP -+# -------------- -+# If we don't have a new enough Autoconf to choose the best grep -+# available, choose the one first in the user's PATH. -+m4_defun([_LT_DECL_EGREP], -+[AC_REQUIRE([AC_PROG_EGREP])dnl -+AC_REQUIRE([AC_PROG_FGREP])dnl -+test -z "$GREP" && GREP=grep -+_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) -+_LT_DECL([], [EGREP], [1], [An ERE matcher]) -+_LT_DECL([], [FGREP], [1], [A literal string matcher]) -+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too -+AC_SUBST([GREP]) -+]) ++# as_fn_mkdir_p ++# ------------- ++# Create "$as_dir" as a directory, including parents if necessary. ++as_fn_mkdir_p () + { +-exit (closedir (opendir (".")) != 0); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_closedir_void=no +-else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-( exit $ac_status ) +-ac_cv_func_closedir_void=yes +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || eval $as_mkdir_p || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X$//$[^/]' \| \ ++ X"$as_dir" : 'X$//$$' \| \ ++ X"$as_dir" : 'X$/$' \| . 2>/dev/null || ++$as_echo X"$as_dir" | ++ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/$.*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + -+# _LT_DECL_OBJDUMP -+# -------------- -+# If we don't have a new enough Autoconf to choose the best objdump -+# available, choose the one first in the user's PATH. -+m4_defun([_LT_DECL_OBJDUMP], -+[AC_CHECK_TOOL(OBJDUMP, objdump, false) -+test -z "$OBJDUMP" && OBJDUMP=objdump -+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) -+AC_SUBST([OBJDUMP]) -+]) ++} # as_fn_mkdir_p ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p='mkdir -p "$as_dir"' ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false + fi + ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in #( ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_closedir_void" >&5 +-echo "${ECHO_T}$ac_cv_func_closedir_void" >&6 +-if test $ac_cv_func_closedir_void = yes; then ++as_executable_p=$as_test_x + +-cat >>confdefs.h <<\_ACEOF +-#define CLOSEDIR_VOID 1 +-_ACEOF ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +-fi ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + ++exec 6>&1 ++## ----------------------------------- ## ++## Main body of $CONFIG_STATUS script. ## ++## ----------------------------------- ## ++_ASEOF ++test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +-for ac_header in unistd.h vfork.h +-do +-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +-else +- # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_header_compiler=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# Save the log message, to keep $0 and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. ++ac_log=" ++This file was extended by I2O RAID Utilities $as_me 0.0.6, which was ++generated by GNU Autoconf 2.67. Invocation command line was + +-ac_header_compiler=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ CONFIG_FILES = $CONFIG_FILES ++ CONFIG_HEADERS = $CONFIG_HEADERS ++ CONFIG_LINKS = $CONFIG_LINKS ++ CONFIG_COMMANDS = $CONFIG_COMMANDS ++ $ $0 $@ + -+# _LT_DECL_SED -+# ------------ -+# Check for a fully-functional sed program, that truncates -+# as few characters as possible. Prefer GNU sed if found. -+m4_defun([_LT_DECL_SED], -+[AC_PROG_SED -+test -z "$SED" && SED=sed -+Xsed="$SED -e 1s/^X//" -+_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) -+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], -+ [Sed that helps us avoid accidentally triggering echo(1) options like -n]) -+])# _LT_DECL_SED ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" + +-# Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then +- ac_header_preproc=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_header_preproc=no +-fi +-rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++case $ac_config_files in *" ++"*) set x $ac_config_files; shift; ac_config_files=$*;; ++esac + +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## --------------------------------------------- ## +-## Report this to the I2O RAID Utilities lists. ## +-## --------------------------------------------- ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 +- ;; ++case $ac_config_headers in *" ++"*) set x $ac_config_headers; shift; ac_config_headers=$*;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- eval "$as_ac_Header=\$ac_header_preproc" +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +-fi +-if test `eval echo '${'$as_ac_Header'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + -+m4_ifndef([AC_PROG_SED], [ -+############################################################ -+# NOTE: This macro has been submitted for inclusion into # -+# GNU Autoconf as AC_PROG_SED. When it is available in # -+# a released version of Autoconf we should remove this # -+# macro and use it instead. # -+############################################################ ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++# Files that config.status was made for. ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" + -+m4_defun([AC_PROG_SED], -+[AC_MSG_CHECKING([for a sed that does not truncate output]) -+AC_CACHE_VAL(lt_cv_path_SED, -+[# Loop through the user's path and test for sed and gsed. -+# Then use that list of sed's as ones to test for truncation. -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for lt_ac_prog in sed gsed; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then -+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" -+ fi -+ done -+ done -+done -+IFS=$as_save_IFS -+lt_ac_max=0 -+lt_ac_count=0 -+# Add /usr/xpg4/bin/sed as it is typically found on Solaris -+# along with /bin/sed that truncates output. -+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do -+ test ! -f $lt_ac_sed && continue -+ cat /dev/null > conftest.in -+ lt_ac_count=0 -+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in -+ # Check for GNU sed and select it if it is found. -+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then -+ lt_cv_path_SED=$lt_ac_sed -+ break -+ fi -+ while true; do -+ cat conftest.in conftest.in >conftest.tmp -+ mv conftest.tmp conftest.in -+ cp conftest.in conftest.nl -+ echo >>conftest.nl -+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break -+ cmp -s conftest.out conftest.nl || break -+ # 10000 chars as input seems more than enough -+ test $lt_ac_count -gt 10 && break -+ lt_ac_count=`expr $lt_ac_count + 1` -+ if test $lt_ac_count -gt $lt_ac_max; then -+ lt_ac_max=$lt_ac_count -+ lt_cv_path_SED=$lt_ac_sed -+ fi -+ done -+done -+]) -+SED=$lt_cv_path_SED -+AC_SUBST([SED]) -+AC_MSG_RESULT([$SED]) -+])#AC_PROG_SED -+])#m4_ifndef + _ACEOF + +-fi ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++ac_cs_usage="\ ++\`$as_me' instantiates files and other configuration actions ++from templates according to the current configuration. Unless the files ++and actions are specified as TAGs, all are instantiated by default. + +-done ++Usage: $0 [OPTION]... [TAG]... + -+# Old name: -+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([LT_AC_PROG_SED], []) ++ -h, --help print this help, then exit ++ -V, --version print version number and configuration settings, then exit ++ --config print configuration, then exit ++ -q, --quiet, --silent ++ do not print progress messages ++ -d, --debug don't remove temporary files ++ --recheck update $as_me by reconfiguring in the same conditions ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ --header=FILE[:TEMPLATE] ++ instantiate the configuration header FILE + ++Configuration files: ++$config_files + -+# _LT_CHECK_SHELL_FEATURES -+# ------------------------ -+# Find out whether the shell is Bourne or XSI compatible, -+# or has some other useful features. -+m4_defun([_LT_CHECK_SHELL_FEATURES], -+[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) -+# Try some XSI features -+xsi_shell=no -+( _lt_dummy="a/b/c" -+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ -+ = c,a/b,, \ -+ && eval 'test $(( 1 + 1 )) -eq 2 \ -+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ -+ && xsi_shell=yes -+AC_MSG_RESULT([$xsi_shell]) -+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) ++Configuration headers: ++$config_headers + ++Configuration commands: ++$config_commands + ++Report bugs to the package provider." + +-for ac_func in fork vfork +-do +-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define $ac_func to an innocuous variant, in case declares $ac_func. +- For example, HP-UX 11i declares gettimeofday. */ +-#define $ac_func innocuous_$ac_func ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ++ac_cs_version="\\ ++I2O RAID Utilities config.status 0.0.6 ++configured by $0, generated by GNU Autoconf 2.67, ++ with options \\"\$ac_cs_config\\" + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++Copyright (C) 2010 Free Software Foundation, Inc. ++This config.status script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it." + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++MKDIR_P='$MKDIR_P' ++AWK='$AWK' ++test -n "\$AWK" || AWK=awk ++_ACEOF + +-#undef $ac_func ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# The default lists apply if the user does not specify any file. ++ac_need_defaults=: ++while test $# != 0 ++do ++ case $1 in ++ --*=?*) ++ ac_option=`expr "X$1" : 'X$[^=]*$='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=$.*$'` ++ ac_shift=: ++ ;; ++ --*=) ++ ac_option=`expr "X$1" : 'X$[^=]*$='` ++ ac_optarg= ++ ac_shift=: ++ ;; ++ *) ++ ac_option=$1 ++ ac_optarg=$2 ++ ac_shift=shift ++ ;; ++ esac + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} +-#endif ++ case $ac_option in ++ # Handling of the options. ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ ac_cs_recheck=: ;; ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ $as_echo "$ac_cs_version"; exit ;; ++ --config | --confi | --conf | --con | --co | --c ) ++ $as_echo "$ac_cs_config"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) ++ debug=: ;; ++ --file | --fil | --fi | --f ) ++ $ac_shift ++ case $ac_optarg in ++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ '') as_fn_error $? "missing file argument" ;; ++ esac ++ as_fn_append CONFIG_FILES " '$ac_optarg'" ++ ac_need_defaults=false;; ++ --header | --heade | --head | --hea ) ++ $ac_shift ++ case $ac_optarg in ++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ esac ++ as_fn_append CONFIG_HEADERS " '$ac_optarg'" ++ ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ as_fn_error $? "ambiguous option: \`$1' ++Try \`$0 --help' for more information.";; ++ --help | --hel | -h ) ++ $as_echo "$ac_cs_usage"; exit ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil | --si | --s) ++ ac_cs_silent=: ;; + +-int +-main () +-{ +-return f != $ac_func; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- eval "$as_ac_var=yes" +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ # This is an error. ++ -*) as_fn_error $? "unrecognized option: \`$1' ++Try \`$0 --help' for more information." ;; + +-eval "$as_ac_var=no" +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +-if test `eval echo '${'$as_ac_var'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +-_ACEOF ++ *) as_fn_append ac_config_targets " $1" ++ ac_need_defaults=false ;; + +-fi ++ esac ++ shift + done + +-if test "x$ac_cv_func_fork" = xyes; then +- echo "$as_me:$LINENO: checking for working fork" >&5 +-echo $ECHO_N "checking for working fork... $ECHO_C" >&6 +-if test "${ac_cv_func_fork_works+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then +- ac_cv_func_fork_works=cross +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* By Ruediger Kuhlmann. */ +- #include +- #if HAVE_UNISTD_H +- # include +- #endif +- /* Some systems only have a dummy stub for fork() */ +- int main () +- { +- if (fork() < 0) +- exit (1); +- exit (0); +- } +-_ACEOF +-rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_fork_works=yes +-else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ac_configure_extra_args= + +-( exit $ac_status ) +-ac_cv_func_fork_works=no +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +-fi ++if $ac_cs_silent; then ++ exec 6>/dev/null ++ ac_configure_extra_args="$ac_configure_extra_args --silent" + fi +-echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5 +-echo "${ECHO_T}$ac_cv_func_fork_works" >&6 + +-else +- ac_cv_func_fork_works=$ac_cv_func_fork +-fi +-if test "x$ac_cv_func_fork_works" = xcross; then +- case $host in +- *-*-amigaos* | *-*-msdosdjgpp*) +- # Override, as these systems have only a dummy fork() stub +- ac_cv_func_fork_works=no +- ;; +- *) +- ac_cv_func_fork_works=yes +- ;; +- esac +- { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 +-echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++if \$ac_cs_recheck; then ++ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ shift ++ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 ++ CONFIG_SHELL='$SHELL' ++ export CONFIG_SHELL ++ exec "\$@" + fi +-ac_cv_func_vfork_works=$ac_cv_func_vfork +-if test "x$ac_cv_func_vfork" = xyes; then +- echo "$as_me:$LINENO: checking for working vfork" >&5 +-echo $ECHO_N "checking for working vfork... $ECHO_C" >&6 +-if test "${ac_cv_func_vfork_works+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then +- ac_cv_func_vfork_works=cross +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ + -+AC_MSG_CHECKING([whether the shell understands "+="]) -+lt_shell_append=no -+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ -+ >/dev/null 2>&1 \ -+ && lt_shell_append=yes -+AC_MSG_RESULT([$lt_shell_append]) -+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Thanks to Paul Eggert for this test. */ +-#include +-#include +-#include +-#include +-#include +-#if HAVE_UNISTD_H +-# include +-#endif +-#if HAVE_VFORK_H +-# include +-#endif +-/* On some sparc systems, changes by the child to local and incoming +- argument registers are propagated back to the parent. The compiler +- is told about this with #include , but some compilers +- (e.g. gcc -O) don't grok . Test for this by using a +- static variable whose address is put into a register that is +- clobbered by the vfork. */ +-static void +-#ifdef __cplusplus +-sparc_address_test (int arg) +-# else +-sparc_address_test (arg) int arg; +-#endif ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++exec 5>>config.log + { +- static pid_t child; +- if (!child) { +- child = vfork (); +- if (child < 0) { +- perror ("vfork"); +- _exit(2); +- } +- if (!child) { +- arg = getpid(); +- write(-1, "", 0); +- _exit (arg); +- } +- } +-} ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ $as_echo "$ac_log" ++} >&5 + +-int +-main () +-{ +- pid_t parent = getpid (); +- pid_t child; ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++# ++# INIT-COMMANDS ++# ++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + +- sparc_address_test (0); + +- child = vfork (); ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +- if (child == 0) { +- /* Here is another test for sparc vfork register problems. This +- test uses lots of local variables, at least as many local +- variables as main has allocated so far including compiler +- temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris +- 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should +- reuse the register of parent for one of the local variables, +- since it will think that parent can't possibly be used any more +- in this routine. Assigning to the local variable will thus +- munge parent in the parent process. */ +- pid_t +- p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), +- p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); +- /* Convince the compiler that p..p7 are live; otherwise, it might +- use the same hardware register for all 8 local variables. */ +- if (p != p1 || p != p2 || p != p3 || p != p4 +- || p != p5 || p != p6 || p != p7) +- _exit(1); ++sed_quote_subst='$sed_quote_subst' ++double_quote_subst='$double_quote_subst' ++delay_variable_subst='$delay_variable_subst' ++macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' ++macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' ++enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' ++pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' ++enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' ++host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' ++host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' ++host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' ++build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' ++build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' ++build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' ++SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' ++Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' ++GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' ++EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' ++FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' ++LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' ++NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' ++LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' ++max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' ++ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' ++exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' ++lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' ++lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' ++lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' ++reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' ++reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' ++deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' ++file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' ++AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' ++AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' ++RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' ++old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' ++CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' ++GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' ++SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' ++ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' ++MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' ++need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' ++DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' ++NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' ++LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' ++libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' ++shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' ++export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' ++allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' ++inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' ++link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' ++fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' ++always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' ++export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' ++variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' ++need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' ++version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' ++runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' ++libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' ++soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' ++old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' ++striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`' ++predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`' ++postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`' ++predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`' ++postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`' ++LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' + -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ lt_unset=unset -+else -+ lt_unset=false -+fi -+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl ++LTCC='$LTCC' ++LTCFLAGS='$LTCFLAGS' ++compiler='$compiler_DEFAULT' + -+# test EBCDIC or ASCII -+case `echo X|tr X '\101'` in -+ A) # ASCII based system -+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr -+ lt_SP2NL='tr \040 \012' -+ lt_NL2SP='tr \015\012 \040\040' -+ ;; -+ *) # EBCDIC based system -+ lt_SP2NL='tr \100 \n' -+ lt_NL2SP='tr \r\n \100\100' ++# Quote evaled strings. ++for var in SED \ ++GREP \ ++EGREP \ ++FGREP \ ++LD \ ++NM \ ++LN_S \ ++lt_SP2NL \ ++lt_NL2SP \ ++reload_flag \ ++OBJDUMP \ ++deplibs_check_method \ ++file_magic_cmd \ ++AR \ ++AR_FLAGS \ ++STRIP \ ++RANLIB \ ++CC \ ++CFLAGS \ ++compiler \ ++lt_cv_sys_global_symbol_pipe \ ++lt_cv_sys_global_symbol_to_cdecl \ ++lt_cv_sys_global_symbol_to_c_name_address \ ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++SHELL \ ++ECHO \ ++lt_prog_compiler_no_builtin_flag \ ++lt_prog_compiler_wl \ ++lt_prog_compiler_pic \ ++lt_prog_compiler_static \ ++lt_cv_prog_compiler_c_o \ ++need_locks \ ++DSYMUTIL \ ++NMEDIT \ ++LIPO \ ++OTOOL \ ++OTOOL64 \ ++shrext_cmds \ ++export_dynamic_flag_spec \ ++whole_archive_flag_spec \ ++compiler_needs_object \ ++with_gnu_ld \ ++allow_undefined_flag \ ++no_undefined_flag \ ++hardcode_libdir_flag_spec \ ++hardcode_libdir_flag_spec_ld \ ++hardcode_libdir_separator \ ++fix_srcfile_path \ ++exclude_expsyms \ ++include_expsyms \ ++file_list_spec \ ++variables_saved_for_relink \ ++libname_spec \ ++library_names_spec \ ++soname_spec \ ++finish_eval \ ++old_striplib \ ++striplib \ ++compiler_lib_search_dirs \ ++predep_objects \ ++postdep_objects \ ++predeps \ ++postdeps \ ++compiler_lib_search_path \ ++LD_CXX \ ++compiler_CXX \ ++lt_prog_compiler_no_builtin_flag_CXX \ ++lt_prog_compiler_wl_CXX \ ++lt_prog_compiler_pic_CXX \ ++lt_prog_compiler_static_CXX \ ++lt_cv_prog_compiler_c_o_CXX \ ++export_dynamic_flag_spec_CXX \ ++whole_archive_flag_spec_CXX \ ++compiler_needs_object_CXX \ ++with_gnu_ld_CXX \ ++allow_undefined_flag_CXX \ ++no_undefined_flag_CXX \ ++hardcode_libdir_flag_spec_CXX \ ++hardcode_libdir_flag_spec_ld_CXX \ ++hardcode_libdir_separator_CXX \ ++fix_srcfile_path_CXX \ ++exclude_expsyms_CXX \ ++include_expsyms_CXX \ ++file_list_spec_CXX \ ++compiler_lib_search_dirs_CXX \ ++predep_objects_CXX \ ++postdep_objects_CXX \ ++predeps_CXX \ ++postdeps_CXX \ ++compiler_lib_search_path_CXX; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done + +- /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent +- from child file descriptors. If the child closes a descriptor +- before it execs or exits, this munges the parent's descriptor +- as well. Test for this by closing stdout in the child. */ +- _exit(close(fileno(stdout)) != 0); +- } else { +- int status; +- struct stat st; ++# Double-quote double-evaled strings. ++for var in reload_cmds \ ++old_postinstall_cmds \ ++old_postuninstall_cmds \ ++old_archive_cmds \ ++extract_expsyms_cmds \ ++old_archive_from_new_cmds \ ++old_archive_from_expsyms_cmds \ ++archive_cmds \ ++archive_expsym_cmds \ ++module_cmds \ ++module_expsym_cmds \ ++export_symbols_cmds \ ++prelink_cmds \ ++postinstall_cmds \ ++postuninstall_cmds \ ++finish_cmds \ ++sys_lib_search_path_spec \ ++sys_lib_dlsearch_path_spec \ ++old_archive_cmds_CXX \ ++old_archive_from_new_cmds_CXX \ ++old_archive_from_expsyms_cmds_CXX \ ++archive_cmds_CXX \ ++archive_expsym_cmds_CXX \ ++module_cmds_CXX \ ++module_expsym_cmds_CXX \ ++export_symbols_cmds_CXX \ ++prelink_cmds_CXX; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done + +- while (wait(&status) != child) +- ; +- exit( +- /* Was there some problem with vforking? */ +- child < 0 ++# Fix-up fallback echo if it was mangled by the above quoting rules. ++case \$lt_ECHO in ++*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` + ;; +esac -+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl -+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl -+])# _LT_CHECK_SHELL_FEATURES -+ -+ -+# _LT_PROG_XSI_SHELLFNS -+# --------------------- -+# Bourne and XSI compatible variants of some useful shell functions. -+m4_defun([_LT_PROG_XSI_SHELLFNS], -+[case $xsi_shell in -+ yes) -+ cat << \_LT_EOF >> "$cfgfile" -+ -+# func_dirname file append nondir_replacement -+# Compute the dirname of FILE. If nonempty, add APPEND to the result, -+# otherwise set result to NONDIR_REPLACEMENT. -+func_dirname () -+{ -+ case ${1} in -+ */*) func_dirname_result="${1%/*}${2}" ;; -+ * ) func_dirname_result="${3}" ;; -+ esac -+} -+ -+# func_basename file -+func_basename () -+{ -+ func_basename_result="${1##*/}" -+} -+ -+# func_dirname_and_basename file append nondir_replacement -+# perform func_basename and func_dirname in a single function -+# call: -+# dirname: Compute the dirname of FILE. If nonempty, -+# add APPEND to the result, otherwise set result -+# to NONDIR_REPLACEMENT. -+# value returned in "$func_dirname_result" -+# basename: Compute filename of FILE. -+# value retuned in "$func_basename_result" -+# Implementation must be kept synchronized with func_dirname -+# and func_basename. For efficiency, we do not delegate to -+# those functions but instead duplicate the functionality here. -+func_dirname_and_basename () -+{ -+ case ${1} in -+ */*) func_dirname_result="${1%/*}${2}" ;; -+ * ) func_dirname_result="${3}" ;; -+ esac -+ func_basename_result="${1##*/}" -+} -+ -+# func_stripname prefix suffix name -+# strip PREFIX and SUFFIX off of NAME. -+# PREFIX and SUFFIX must not contain globbing or regex special -+# characters, hashes, percent signs, but SUFFIX may contain a leading -+# dot (in which case that matches only a dot). -+func_stripname () -+{ -+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are -+ # positional parameters, so assign one to ordinary parameter first. -+ func_stripname_result=${3} -+ func_stripname_result=${func_stripname_result#"${1}"} -+ func_stripname_result=${func_stripname_result%"${2}"} -+} -+ -+# func_opt_split -+func_opt_split () -+{ -+ func_opt_split_opt=${1%%=*} -+ func_opt_split_arg=${1#*=} -+} + +- /* Did the child fail? (This shouldn't happen.) */ +- || status ++ac_aux_dir='$ac_aux_dir' ++xsi_shell='$xsi_shell' ++lt_shell_append='$lt_shell_append' + +- /* Did the vfork/compiler bug occur? */ +- || parent != getpid() ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes INIT. ++if test -n "\${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi + +- /* Did the file descriptor bug occur? */ +- || fstat(fileno(stdout), &st) != 0 +- ); +- } +-} +-_ACEOF +-rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_vfork_works=yes +-else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-( exit $ac_status ) +-ac_cv_func_vfork_works=no +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +-fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5 +-echo "${ECHO_T}$ac_cv_func_vfork_works" >&6 ++ PACKAGE='$PACKAGE' ++ VERSION='$VERSION' ++ TIMESTAMP='$TIMESTAMP' ++ RM='$RM' ++ ofile='$ofile' + -+# func_lo2o object -+func_lo2o () -+{ -+ case ${1} in -+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; -+ *) func_lo2o_result=${1} ;; + +-fi; +-if test "x$ac_cv_func_fork_works" = xcross; then +- ac_cv_func_vfork_works=$ac_cv_func_vfork +- { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 +-echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} +-fi + +-if test "x$ac_cv_func_vfork_works" = xyes; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_WORKING_VFORK 1 +-_ACEOF + +-else + +-cat >>confdefs.h <<\_ACEOF +-#define vfork fork + _ACEOF + +-fi +-if test "x$ac_cv_func_fork_works" = xyes; then ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_WORKING_FORK 1 +-_ACEOF ++# Handling of arguments. ++for ac_config_target in $ac_config_targets ++do ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "raideng/Makefile") CONFIG_FILES="$CONFIG_FILES raideng/Makefile" ;; ++ "raidutil/Makefile") CONFIG_FILES="$CONFIG_FILES raidutil/Makefile" ;; ++ "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; ++ "distribution/raidutils.spec") CONFIG_FILES="$CONFIG_FILES distribution/raidutils.spec" ;; + +-fi ++ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;; + esac -+} -+ -+# func_xform libobj-or-source -+func_xform () -+{ -+ func_xform_result=${1%.*}.lo -+} -+ -+# func_arith arithmetic-term... -+func_arith () -+{ -+ func_arith_result=$(( $[*] )) -+} -+ -+# func_len string -+# STRING may not start with a hyphen. -+func_len () -+{ -+ func_len_result=${#1} -+} -+ -+_LT_EOF -+ ;; -+ *) # Bourne compatible functions. -+ cat << \_LT_EOF >> "$cfgfile" ++done + +-if test $ac_cv_c_compiler_gnu = yes; then +- echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 +-echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6 +-if test "${ac_cv_prog_gcc_traditional+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_pattern="Autoconf.*'x'" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-Autoconf TIOCGETP +-_ACEOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "$ac_pattern" >/dev/null 2>&1; then +- ac_cv_prog_gcc_traditional=yes +-else +- ac_cv_prog_gcc_traditional=no + -+# func_dirname file append nondir_replacement -+# Compute the dirname of FILE. If nonempty, add APPEND to the result, -+# otherwise set result to NONDIR_REPLACEMENT. -+func_dirname () ++# If the user did not use the arguments to specify the items to instantiate, ++# then the envvar interface is used. Set only those that are not. ++# We use the long form for the default assignment because of an extremely ++# bizarre bug on SunOS 4.1.3. ++if $ac_need_defaults; then ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ++ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers ++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands + fi +-rm -f conftest* + ++# Have a temporary directory for convenience. Make it in the build tree ++# simply because there is no reason against having it here, and in addition, ++# creating and moving files from /tmp can sometimes cause problems. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. ++$debug || +{ -+ # Extract subdirectory from the argument. -+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` -+ if test "X$func_dirname_result" = "X${1}"; then -+ func_dirname_result="${3}" -+ else -+ func_dirname_result="$func_dirname_result${2}" -+ fi ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 ++ trap 'as_fn_exit 1' 1 2 13 15 +} -+ -+# func_basename file -+func_basename () ++# Create a (secure) tmp directory for tmp files. + +- if test $ac_cv_prog_gcc_traditional = no; then +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-Autoconf TCGETA +-_ACEOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "$ac_pattern" >/dev/null 2>&1; then +- ac_cv_prog_gcc_traditional=yes +-fi +-rm -f conftest* +{ -+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -+} -+ -+dnl func_dirname_and_basename -+dnl A portable version of this function is already defined in general.m4sh -+dnl so there is no need for it here. -+ -+# func_stripname prefix suffix name -+# strip PREFIX and SUFFIX off of NAME. -+# PREFIX and SUFFIX must not contain globbing or regex special -+# characters, hashes, percent signs, but SUFFIX may contain a leading -+# dot (in which case that matches only a dot). -+# func_strip_suffix prefix name -+func_stripname () ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && ++ test -n "$tmp" && test -d "$tmp" ++} || +{ -+ case ${2} in -+ .*) func_stripname_result=`$ECHO "X${3}" \ -+ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; -+ *) func_stripname_result=`$ECHO "X${3}" \ -+ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; -+ esac -+} -+ -+# sed scripts: -+my_sed_long_opt='1s/^$-[[^=]]*$=.*/\1/;q' -+my_sed_long_arg='1s/^-[[^=]]*=//' ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") ++} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 + +- fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 +-echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6 +- if test $ac_cv_prog_gcc_traditional = yes; then +- CC="$CC -traditional" +- fi +-fi ++# Set up the scripts for CONFIG_FILES section. ++# No need to generate them if there are no CONFIG_FILES. ++# This happens for instance with `./config.status config.h'. ++if test -n "$CONFIG_FILES"; then + + +-for ac_header in stdlib.h +-do +-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ac_cr=`echo X | tr X '\015'` ++# On cygwin, bash can eat \r inside `` if the user requested igncr. ++# But we know of no other shell where ac_cr would be empty at this ++# point, so we can use a bashism as a fallback. ++if test "x$ac_cr" = x; then ++ eval ac_cr=\$\'\\r\' + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +-else +- # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_header_compiler=yes ++ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` ++if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ++ ac_cs_awk_cr='\\r' + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-ac_header_compiler=no ++ ac_cs_awk_cr=$ac_cr + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 + +-# Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++echo 'BEGIN {' >"$tmp/subs1.awk" && + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include <$ac_header> +-_ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + -+# func_opt_split -+func_opt_split () -+{ -+ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` -+ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` -+} + -+# func_lo2o object -+func_lo2o () +{ -+ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` -+} ++ echo "cat >conf$$subs.awk <<_ACEOF" && ++ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && ++ echo "_ACEOF" ++} >conf$$subs.sh || ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ++ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ . ./conf$$subs.sh || ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + -+# func_xform libobj-or-source -+func_xform () -+{ -+ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` ++ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` ++ if test $ac_delim_n = $ac_delim_num; then ++ break ++ elif $ac_last_try; then ++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else +- ac_cpp_err= ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then +- ac_header_preproc=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++done ++rm -f conf$$subs.sh + +- ac_header_preproc=no +-fi +-rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++cat >>"\$tmp/subs1.awk" <<\\_ACAWK && ++_ACEOF ++sed -n ' ++h ++s/^/S["/; s/!.*/"]=/ ++p ++g ++s/^[^!]*!// ++:repl ++t repl ++s/'"$ac_delim"'$// ++t delim ++:nl ++h ++s/$.\{148\}$..*/\1/ ++t more1 ++s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ ++p ++n ++b repl ++:more1 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t nl ++:delim ++h ++s/$.\{148\}$..*/\1/ ++t more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"/ ++p ++b ++:more2 ++s/["\\]/\\&/g; s/^/"/; s/$/"\\/ ++p ++g ++s/.\{148\}// ++t delim ++' >$CONFIG_STATUS || ac_write_fail=1 ++rm -f conf$$subs.awk ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++_ACAWK ++cat >>"\$tmp/subs1.awk" <<_ACAWK && ++ for (key in S) S_is_set[key] = 1 ++ FS = "" + -+# func_arith arithmetic-term... -+func_arith () -+{ -+ func_arith_result=`expr "$[@]"` +} -+ -+# func_len string -+# STRING may not start with a hyphen. -+func_len () +{ -+ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` ++ line = $ 0 ++ nfields = split(line, field, "@") ++ substed = 0 ++ len = length(field[1]) ++ for (i = 2; i < nfields; i++) { ++ key = field[i] ++ keylen = length(key) ++ if (S_is_set[key]) { ++ value = S[key] ++ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) ++ len += length(value) + length(field[++i]) ++ substed = 1 ++ } else ++ len += 1 + keylen ++ } + +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## --------------------------------------------- ## +-## Report this to the I2O RAID Utilities lists. ## +-## --------------------------------------------- ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 +- ;; +-esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- eval "$as_ac_Header=\$ac_header_preproc" +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ print line +} + +-fi +-if test `eval echo '${'$as_ac_Header'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACAWK ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then ++ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" ++else ++ cat ++fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ ++ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 + _ACEOF + ++# VPATH may cause trouble with some makes, so we remove sole $(srcdir), ++# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ ++h ++s/// ++s/^/:/ ++s/[ ]*$/:/ ++s/:\$(srcdir):/:/g ++s/:\${srcdir}:/:/g ++s/:@srcdir@:/:/g ++s/^:*// ++s/:*$// ++x ++s/$=[ ]*$.*/\1/ ++G ++s/\n// ++s/^[^=]*=[ ]*$// ++}' + fi + +-done ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++fi # test -n "$CONFIG_FILES" + +-echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5 +-echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6 +-if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then +- ac_cv_func_malloc_0_nonnull=no +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#if STDC_HEADERS || HAVE_STDLIB_H +-# include +-#else +-char *malloc (); +-#endif ++# Set up the scripts for CONFIG_HEADERS section. ++# No need to generate them if there are no CONFIG_HEADERS. ++# This happens for instance with `./config.status Makefile'. ++if test -n "$CONFIG_HEADERS"; then ++cat >"$tmp/defines.awk" <<\_ACAWK || ++BEGIN { ++_ACEOF + -+_LT_EOF -+esac ++# Transform confdefs.h into an awk script `defines.awk', embedded as ++# here-document in config.status, that substitutes the proper values into ++# config.h.in to produce config.h. + -+case $lt_shell_append in -+ yes) -+ cat << \_LT_EOF >> "$cfgfile" ++# Create a delimiter string that does not exist in confdefs.h, to ease ++# handling of long lines. ++ac_delim='%!_!# ' ++for ac_last_try in false false :; do ++ ac_t=`sed -n "/$ac_delim/p" confdefs.h` ++ if test -z "$ac_t"; then ++ break ++ elif $ac_last_try; then ++ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done + +-int +-main () +-{ +-exit (malloc (0) ? 0 : 1); +- ; +- return 0; ++# For the awk script, D is an array of macro values keyed by name, ++# likewise P contains macro parameters if any. Preserve backslash ++# newline sequences. + -+# func_append var value -+# Append VALUE to the end of shell variable VAR. -+func_append () -+{ -+ eval "$[1]+=\$[2]" -+} -+_LT_EOF -+ ;; -+ *) -+ cat << \_LT_EOF >> "$cfgfile" ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++sed -n ' ++s/.\{148\}/&'"$ac_delim"'/g ++t rset ++:rset ++s/^[ ]*#[ ]*define[ ][ ]*/ / ++t def ++d ++:def ++s/\\$// ++t bsnl ++s/["\\]/\\&/g ++s/^ $'"$ac_word_re"'$$([^()]*)$[ ]*$.*$/P["\1"]="\2"\ ++D["\1"]=" \3"/p ++s/^ $'"$ac_word_re"'$[ ]*$.*$/D["\1"]=" \2"/p ++d ++:bsnl ++s/["\\]/\\&/g ++s/^ $'"$ac_word_re"'$$([^()]*)$[ ]*$.*$/P["\1"]="\2"\ ++D["\1"]=" \3\\\\\\n"\\/p ++t cont ++s/^ $'"$ac_word_re"'$[ ]*$.*$/D["\1"]=" \2\\\\\\n"\\/p ++t cont ++d ++:cont ++n ++s/.\{148\}/&'"$ac_delim"'/g ++t clear ++:clear ++s/\\$// ++t bsnlc ++s/["\\]/\\&/g; s/^/"/; s/$/"/p ++d ++:bsnlc ++s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p ++b cont ++' >$CONFIG_STATUS || ac_write_fail=1 + -+# func_append var value -+# Append VALUE to the end of shell variable VAR. -+func_append () -+{ -+ eval "$[1]=\$$[1]\$[2]" ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ for (key in D) D_is_set[key] = 1 ++ FS = "" +} ++/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { ++ line = \$ 0 ++ split(line, arg, " ") ++ if (arg[1] == "#") { ++ defundef = arg[2] ++ mac1 = arg[3] ++ } else { ++ defundef = substr(arg[1], 2) ++ mac1 = arg[2] ++ } ++ split(mac1, mac2, "(") #) ++ macro = mac2[1] ++ prefix = substr(line, 1, index(line, defundef) - 1) ++ if (D_is_set[macro]) { ++ # Preserve the white space surrounding the "#". ++ print prefix "define", macro P[macro] D[macro] ++ next ++ } else { ++ # Replace #undef with comments. This is necessary, for example, ++ # in the case of _POSIX_SOURCE, which is predefined and required ++ # on some systems where configure will not decide to define it. ++ if (defundef == "undef") { ++ print "/*", prefix defundef, macro, "*/" ++ next ++ } ++ } + } ++{ print } ++_ACAWK + _ACEOF +-rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_malloc_0_nonnull=yes +-else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 ++fi # test -n "$CONFIG_HEADERS" + +-( exit $ac_status ) +-ac_cv_func_malloc_0_nonnull=no +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +-fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5 +-echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6 +-if test $ac_cv_func_malloc_0_nonnull = yes; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_MALLOC 1 +-_ACEOF ++eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" ++shift ++for ac_tag ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift + +-else +- cat >>confdefs.h <<\_ACEOF +-#define HAVE_MALLOC 0 +-_ACEOF ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;; ++ esac ++ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac ++ as_fn_append ac_file_inputs " '$ac_f'" ++ done + +- case $LIBOBJS in +- "malloc.$ac_objext" | \ +- *" malloc.$ac_objext" | \ +- "malloc.$ac_objext "* | \ +- *" malloc.$ac_objext "* ) ;; +- *) LIBOBJS="$LIBOBJS malloc.$ac_objext" ;; ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input='Generated from '` ++ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' ++ `' by configure.' ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 ++$as_echo "$as_me: creating $ac_file" >&6;} ++ fi ++ # Neutralize special characters interpreted by sed in replacement strings. ++ case $configure_input in #( ++ *\&* | *\|* | *\\* ) ++ ac_sed_conf_input=`$as_echo "$configure_input" | ++ sed 's/[\\\\&|]/\\\\&/g'`;; #( ++ *) ac_sed_conf_input=$configure_input;; ++ esac + -+_LT_EOF ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin" \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; ++ esac + ;; + esac -+]) ---- /dev/null -+++ raidutils-0.0.6/m4/ltsugar.m4 -@@ -0,0 +1,123 @@ -+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- -+# -+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -+# Written by Gary V. Vaughan, 2004 -+# -+# This file is free software; the Free Software Foundation gives -+# unlimited permission to copy and/or distribute it, with or without -+# modifications, as long as this notice is preserved. -+ -+# serial 6 ltsugar.m4 -+ -+# This is to help aclocal find these macros, as it can't see m4_define. -+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) -+ -+ -+# lt_join(SEP, ARG1, [ARG2...]) -+# ----------------------------- -+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their -+# associated separator. -+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier -+# versions in m4sugar had bugs. -+m4_define([lt_join], -+[m4_if([$#], [1], [], -+ [$#], [2], [[$2]], -+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) -+m4_define([_lt_join], -+[m4_if([$#$2], [2], [], -+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) -+ -+ -+# lt_car(LIST) -+# lt_cdr(LIST) -+# ------------ -+# Manipulate m4 lists. -+# These macros are necessary as long as will still need to support -+# Autoconf-2.59 which quotes differently. -+m4_define([lt_car], [[$1]]) -+m4_define([lt_cdr], -+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], -+ [$#], 1, [], -+ [m4_dquote(m4_shift($@))])]) -+m4_define([lt_unquote], $1) -+ -+ -+# lt_append(MACRO-NAME, STRING, [SEPARATOR]) -+# ------------------------------------------ -+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. -+# Note that neither SEPARATOR nor STRING are expanded; they are appended -+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). -+# No SEPARATOR is output if MACRO-NAME was previously undefined (different -+# than defined and empty). -+# -+# This macro is needed until we can rely on Autoconf 2.62, since earlier -+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. -+m4_define([lt_append], -+[m4_define([$1], -+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) -+ -+ -+ -+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) -+# ---------------------------------------------------------- -+# Produce a SEP delimited list of all paired combinations of elements of -+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list -+# has the form PREFIXmINFIXSUFFIXn. -+# Needed until we can rely on m4_combine added in Autoconf 2.62. -+m4_define([lt_combine], -+[m4_if(m4_eval([$# > 3]), [1], -+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl -+[[m4_foreach([_Lt_prefix], [$2], -+ [m4_foreach([_Lt_suffix], -+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, -+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) -+ -+ -+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) -+# ----------------------------------------------------------------------- -+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited -+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. -+m4_define([lt_if_append_uniq], -+[m4_ifdef([$1], -+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], -+ [lt_append([$1], [$2], [$3])$4], -+ [$5])], -+ [lt_append([$1], [$2], [$3])$4])]) -+ -+ -+# lt_dict_add(DICT, KEY, VALUE) -+# ----------------------------- -+m4_define([lt_dict_add], -+[m4_define([$1($2)], [$3])]) -+ -+ -+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) -+# -------------------------------------------- -+m4_define([lt_dict_add_subkey], -+[m4_define([$1($2:$3)], [$4])]) -+ -+ -+# lt_dict_fetch(DICT, KEY, [SUBKEY]) -+# ---------------------------------- -+m4_define([lt_dict_fetch], -+[m4_ifval([$3], -+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), -+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) -+ -+ -+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) -+# ----------------------------------------------------------------- -+m4_define([lt_if_dict_fetch], -+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], -+ [$5], -+ [$6])]) + ++ ac_dir=`$as_dirname -- "$ac_file" || ++$as_expr X"$ac_file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X$//$[^/]' \| \ ++ X"$ac_file" : 'X$//$$' \| \ ++ X"$ac_file" : 'X$/$' \| . 2>/dev/null || ++$as_echo X"$ac_file" | ++ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/$.*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ as_dir="$ac_dir"; as_fn_mkdir_p ++ ac_builddir=. + -+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) -+# -------------------------------------------------------------- -+m4_define([lt_dict_filter], -+[m4_if([$5], [], [], -+ [lt_join(m4_quote(m4_default([$4], [[, ]])), -+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), -+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl -+]) ---- /dev/null -+++ raidutils-0.0.6/m4/lt~obsolete.m4 -@@ -0,0 +1,92 @@ -+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -+# -+# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. -+# Written by Scott James Remnant, 2004. -+# -+# This file is free software; the Free Software Foundation gives -+# unlimited permission to copy and/or distribute it, with or without -+# modifications, as long as this notice is preserved. ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; + esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +-cat >>confdefs.h <<\_ACEOF +-#define malloc rpl_malloc +-_ACEOF + +-fi ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # + ++ case $INSTALL in ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; ++ esac ++ ac_MKDIR_P=$MKDIR_P ++ case $MKDIR_P in ++ [\\/$]* | ?:[\\/]* ) ;; ++ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; ++ esac ++_ACEOF + ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ac_sed_dataroot=' ++/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p' ++case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac ++_ACEOF + +-echo "$as_me:$LINENO: checking for working memcmp" >&5 +-echo $ECHO_N "checking for working memcmp... $ECHO_C" >&6 +-if test "${ac_cv_func_memcmp_working+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then +- ac_cv_func_memcmp_working=no +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ++ac_sed_extra="$ac_vpsub ++$extrasub + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-int +-main () +-{ ++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++:t ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++s|@configure_input@|$ac_sed_conf_input|;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@top_build_prefix@&$ac_top_build_prefix&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++s&@MKDIR_P@&$ac_MKDIR_P&;t t ++$ac_datarootdir_hack ++" ++eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + -+# serial 4 lt~obsolete.m4 ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined" >&5 ++$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined" >&2;} + +- /* Some versions of memcmp are not 8-bit clean. */ +- char c0 = 0x40, c1 = 0x80, c2 = 0x81; +- if (memcmp(&c0, &c2, 1) >= 0 || memcmp(&c1, &c2, 1) >= 0) +- exit (1); ++ rm -f "$tmp/stdin" ++ case $ac_file in ++ -) cat "$tmp/out" && rm -f "$tmp/out";; ++ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; ++ esac \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # ++ if test x"$ac_file" != x-; then ++ { ++ $as_echo "/* $configure_input */" \ ++ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" ++ } >"$tmp/config.h" \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 ++$as_echo "$as_me: $ac_file is unchanged" >&6;} ++ else ++ rm -f "$ac_file" ++ mv "$tmp/config.h" "$ac_file" \ ++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ++ fi ++ else ++ $as_echo "/* $configure_input */" \ ++ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ ++ || as_fn_error $? "could not create -" "$LINENO" 5 ++ fi ++# Compute "$ac_file"'s index in $config_headers. ++_am_arg="$ac_file" ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $_am_arg | $_am_arg:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || ++$as_expr X"$_am_arg" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ ++ X"$_am_arg" : 'X$//$[^/]' \| \ ++ X"$_am_arg" : 'X$//$$' \| \ ++ X"$_am_arg" : 'X$/$' \| . 2>/dev/null || ++$as_echo X"$_am_arg" | ++ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/$.*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; + +- /* The Next x86 OpenStep bug shows up only when comparing 16 bytes +- or more and with at least one buffer not starting on a 4-byte boundary. +- William Lewis provided this test program. */ +- { +- char foo[21]; +- char bar[21]; +- int i; +- for (i = 0; i < 4; i++) +- { +- char *a = foo + i; +- char *b = bar + i; +- strcpy (a, "--------01111111"); +- strcpy (b, "--------10000000"); +- if (memcmp (a, b, 16) >= 0) +- exit (1); +- } +- exit (0); +- } ++ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 ++$as_echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac + +- ; +- return 0; + -+# These exist entirely to fool aclocal when bootstrapping libtool. ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || { ++ # Autoconf 2.62 quotes --file arguments for eval, but not when files ++ # are listed without --file. Let's play safe and only enable the eval ++ # if we detect the quoting. ++ case $CONFIG_FILES in ++ *\'*) eval set x "$CONFIG_FILES" ;; ++ *) set x $CONFIG_FILES ;; ++ esac ++ shift ++ for mf ++ do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || ++$as_expr X"$mf" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ ++ X"$mf" : 'X$//$[^/]' \| \ ++ X"$mf" : 'X$//$$' \| \ ++ X"$mf" : 'X$/$' \| . 2>/dev/null || ++$as_echo X"$mf" | ++ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/$.*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`$as_dirname -- "$file" || ++$as_expr X"$file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ ++ X"$file" : 'X$//$[^/]' \| \ ++ X"$file" : 'X$//$$' \| \ ++ X"$file" : 'X$/$' \| . 2>/dev/null || ++$as_echo X"$file" | ++ sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X$\/\/$$/{ ++ s//\1/ ++ q ++ } ++ /^X$\/$.*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ as_dir=$dirpart/$fdir; as_fn_mkdir_p ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++ done + } +-_ACEOF +-rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_memcmp_working=yes +-else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ;; ++ "libtool":C) + +-( exit $ac_status ) +-ac_cv_func_memcmp_working=no +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +-fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_memcmp_working" >&5 +-echo "${ECHO_T}$ac_cv_func_memcmp_working" >&6 +-test $ac_cv_func_memcmp_working = no && case $LIBOBJS in +- "memcmp.$ac_objext" | \ +- *" memcmp.$ac_objext" | \ +- "memcmp.$ac_objext "* | \ +- *" memcmp.$ac_objext "* ) ;; +- *) LIBOBJS="$LIBOBJS memcmp.$ac_objext" ;; +-esac ++ # See if we are running on zsh, and set the options which allow our ++ # commands through without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi + ++ cfgfile="${ofile}T" ++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 ++ $RM "$cfgfile" + ++ cat <<_LT_EOF >> "$cfgfile" ++#! $SHELL + +-for ac_header in stdlib.h +-do +-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +-else +- # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_header_compiler=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# -+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) -+# which have later been changed to m4_define as they aren't part of the -+# exported API, or moved to Autoconf or Automake where they belong. ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 +# -+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -+# using a macro with the same name in our local m4/libtool.m4 it'll -+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -+# and doesn't know about Autoconf macros at all.) ++# This file is part of GNU Libtool. +# -+# So we provide this file, which has a silly filename so it's always -+# included after everything else. This provides aclocal with the -+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -+# because those macros already exist, or will be overwritten later. -+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. ++# GNU Libtool is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. +# -+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -+# Yes, that means every name once taken will need to remain here until -+# we give up compatibility with versions before 1.7, at which point -+# we need to keep only those names which we still refer to. -+ -+# This is to help aclocal find these macros, as it can't see m4_define. -+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) -+ -+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) -+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) -+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) -+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) -+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) -+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) -+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) -+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) -+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) -+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) -+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) -+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) -+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) -+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) -+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) -+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) -+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) -+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) -+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) -+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) -+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) -+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) -+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) -+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) -+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) -+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) -+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) -+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) -+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) -+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) -+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) -+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) -+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) -+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) -+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) -+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) -+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) -+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) -+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) -+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) -+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) -+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) -+m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) -+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) -+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) -+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) -+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) -+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) -+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) -+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) -+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) -+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) -+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) -+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) ---- /dev/null -+++ raidutils-0.0.6/m4/ltoptions.m4 -@@ -0,0 +1,368 @@ -+# Helper functions for option handling. -*- Autoconf -*- ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. +# -+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -+# Written by Gary V. Vaughan, 2004 ++# GNU Libtool is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. +# -+# This file is free software; the Free Software Foundation gives -+# unlimited permission to copy and/or distribute it, with or without -+# modifications, as long as this notice is preserved. -+ -+# serial 6 ltoptions.m4 -+ -+# This is to help aclocal find these macros, as it can't see m4_define. -+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) -+ -+ -+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) -+# ------------------------------------------ -+m4_define([_LT_MANGLE_OPTION], -+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) -+ -+ -+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) -+# --------------------------------------- -+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a -+# matching handler defined, dispatch to it. Other OPTION-NAMEs are -+# saved as a flag. -+m4_define([_LT_SET_OPTION], -+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl -+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), -+ _LT_MANGLE_DEFUN([$1], [$2]), -+ [m4_warning([Unknown $1 option `$2'])])[]dnl -+]) -+ -+ -+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) -+# ------------------------------------------------------------ -+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -+m4_define([_LT_IF_OPTION], -+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) -+ -+ -+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) -+# ------------------------------------------------------- -+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME -+# are set. -+m4_define([_LT_UNLESS_OPTIONS], -+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), -+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), -+ [m4_define([$0_found])])])[]dnl -+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 -+])[]dnl -+]) -+ -+ -+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) -+# ---------------------------------------- -+# OPTION-LIST is a space-separated list of Libtool options associated -+# with MACRO-NAME. If any OPTION has a matching handler declared with -+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about -+# the unknown option and exit. -+m4_defun([_LT_SET_OPTIONS], -+[# Set options -+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), -+ [_LT_SET_OPTION([$1], _LT_Option)]) -+ -+m4_if([$1],[LT_INIT],[ -+ dnl -+ dnl Simply set some default values (i.e off) if boolean options were not -+ dnl specified: -+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no -+ ]) -+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no -+ ]) -+ dnl -+ dnl If no reference was made to various pairs of opposing options, then -+ dnl we run the default mode handler for the pair. For example, if neither -+ dnl `shared' nor `disable-shared' was passed, we enable building of shared -+ dnl archives by default: -+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) -+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) -+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) -+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], -+ [_LT_ENABLE_FAST_INSTALL]) -+ ]) -+])# _LT_SET_OPTIONS -+ -+ -+## --------------------------------- ## -+## Macros to handle LT_INIT options. ## -+## --------------------------------- ## -+ -+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) -+# ----------------------------------------- -+m4_define([_LT_MANGLE_DEFUN], -+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) -+ -+ -+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) -+# ----------------------------------------------- -+m4_define([LT_OPTION_DEFINE], -+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl -+])# LT_OPTION_DEFINE -+ -+ -+# dlopen -+# ------ -+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes -+]) -+ -+AU_DEFUN([AC_LIBTOOL_DLOPEN], -+[_LT_SET_OPTION([LT_INIT], [dlopen]) -+AC_DIAGNOSE([obsolete], -+[$0: Remove this warning and the call to _LT_SET_OPTION when you -+put the `dlopen' option into LT_INIT's first parameter.]) -+]) -+ -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) -+ -+ -+# win32-dll -+# --------- -+# Declare package support for building win32 dll's. -+LT_OPTION_DEFINE([LT_INIT], [win32-dll], -+[enable_win32_dll=yes -+ -+case $host in -+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) -+ AC_CHECK_TOOL(AS, as, false) -+ AC_CHECK_TOOL(DLLTOOL, dlltool, false) -+ AC_CHECK_TOOL(OBJDUMP, objdump, false) -+ ;; -+esac -+ -+test -z "$AS" && AS=as -+_LT_DECL([], [AS], [0], [Assembler program])dnl -+ -+test -z "$DLLTOOL" && DLLTOOL=dlltool -+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl -+ -+test -z "$OBJDUMP" && OBJDUMP=objdump -+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl -+])# win32-dll -+ -+AU_DEFUN([AC_LIBTOOL_WIN32_DLL], -+[AC_REQUIRE([AC_CANONICAL_HOST])dnl -+_LT_SET_OPTION([LT_INIT], [win32-dll]) -+AC_DIAGNOSE([obsolete], -+[$0: Remove this warning and the call to _LT_SET_OPTION when you -+put the `win32-dll' option into LT_INIT's first parameter.]) -+]) -+ -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) -+ -+ -+# _LT_ENABLE_SHARED([DEFAULT]) -+# ---------------------------- -+# implement the --enable-shared flag, and supports the `shared' and -+# `disable-shared' LT_INIT options. -+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -+m4_define([_LT_ENABLE_SHARED], -+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl -+AC_ARG_ENABLE([shared], -+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], -+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], -+ [p=${PACKAGE-default} -+ case $enableval in -+ yes) enable_shared=yes ;; -+ no) enable_shared=no ;; -+ *) -+ enable_shared=no -+ # Look at the argument we got. We use all the common list separators. -+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -+ for pkg in $enableval; do -+ IFS="$lt_save_ifs" -+ if test "X$pkg" = "X$p"; then -+ enable_shared=yes -+ fi -+ done -+ IFS="$lt_save_ifs" -+ ;; -+ esac], -+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) -+ -+ _LT_DECL([build_libtool_libs], [enable_shared], [0], -+ [Whether or not to build shared libraries]) -+])# _LT_ENABLE_SHARED -+ -+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) -+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) -+ -+# Old names: -+AC_DEFUN([AC_ENABLE_SHARED], -+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) -+]) -+ -+AC_DEFUN([AC_DISABLE_SHARED], -+[_LT_SET_OPTION([LT_INIT], [disable-shared]) -+]) -+ -+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -+ -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AM_ENABLE_SHARED], []) -+dnl AC_DEFUN([AM_DISABLE_SHARED], []) -+ -+ -+ -+# _LT_ENABLE_STATIC([DEFAULT]) -+# ---------------------------- -+# implement the --enable-static flag, and support the `static' and -+# `disable-static' LT_INIT options. -+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -+m4_define([_LT_ENABLE_STATIC], -+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl -+AC_ARG_ENABLE([static], -+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], -+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], -+ [p=${PACKAGE-default} -+ case $enableval in -+ yes) enable_static=yes ;; -+ no) enable_static=no ;; -+ *) -+ enable_static=no -+ # Look at the argument we got. We use all the common list separators. -+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -+ for pkg in $enableval; do -+ IFS="$lt_save_ifs" -+ if test "X$pkg" = "X$p"; then -+ enable_static=yes -+ fi -+ done -+ IFS="$lt_save_ifs" -+ ;; -+ esac], -+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT) -+ -+ _LT_DECL([build_old_libs], [enable_static], [0], -+ [Whether or not to build static libraries]) -+])# _LT_ENABLE_STATIC -+ -+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) -+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) -+ -+# Old names: -+AC_DEFUN([AC_ENABLE_STATIC], -+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) -+]) -+ -+AC_DEFUN([AC_DISABLE_STATIC], -+[_LT_SET_OPTION([LT_INIT], [disable-static]) -+]) -+ -+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -+ -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AM_ENABLE_STATIC], []) -+dnl AC_DEFUN([AM_DISABLE_STATIC], []) ++# You should have received a copy of the GNU General Public License ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or ++# obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +-ac_header_compiler=no +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 + +-# Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include <$ac_header> +-_ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then +- ac_header_preproc=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# The names of the tagged configurations supported by this script. ++available_tags="CXX " + +- ac_header_preproc=no +-fi +-rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++# ### BEGIN LIBTOOL CONFIG + +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## --------------------------------------------- ## +-## Report this to the I2O RAID Utilities lists. ## +-## --------------------------------------------- ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 +- ;; +-esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- eval "$as_ac_Header=\$ac_header_preproc" +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++# Which release of libtool.m4 was used? ++macro_version=$macro_version ++macro_revision=$macro_revision + +-fi +-if test `eval echo '${'$as_ac_Header'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +-_ACEOF ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared + +-fi ++# Whether or not to build static libraries. ++build_old_libs=$enable_static + +-done ++# What type of objects to build. ++pic_mode=$pic_mode + +-echo "$as_me:$LINENO: checking for GNU libc compatible realloc" >&5 +-echo $ECHO_N "checking for GNU libc compatible realloc... $ECHO_C" >&6 +-if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then +- ac_cv_func_realloc_0_nonnull=no +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#if STDC_HEADERS || HAVE_STDLIB_H +-# include +-#else +-char *realloc (); +-#endif ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install + +-int +-main () +-{ +-exit (realloc (0, 0) ? 0 : 1); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_realloc_0_nonnull=yes +-else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os + +-( exit $ac_status ) +-ac_cv_func_realloc_0_nonnull=no +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +-fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_realloc_0_nonnull" >&5 +-echo "${ECHO_T}$ac_cv_func_realloc_0_nonnull" >&6 +-if test $ac_cv_func_realloc_0_nonnull = yes; then ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_REALLOC 1 +-_ACEOF ++# A sed program that does not truncate output. ++SED=$lt_SED + +-else +- cat >>confdefs.h <<\_ACEOF +-#define HAVE_REALLOC 0 +-_ACEOF ++# Sed that helps us avoid accidentally triggering echo(1) options like -n. ++Xsed="\$SED -e 1s/^X//" + +- case $LIBOBJS in +- "realloc.$ac_objext" | \ +- *" realloc.$ac_objext" | \ +- "realloc.$ac_objext "* | \ +- *" realloc.$ac_objext "* ) ;; +- *) LIBOBJS="$LIBOBJS realloc.$ac_objext" ;; +-esac ++# A grep program that handles long lines. ++GREP=$lt_GREP + ++# An ERE matcher. ++EGREP=$lt_EGREP + +-cat >>confdefs.h <<\_ACEOF +-#define realloc rpl_realloc +-_ACEOF ++# A literal string matcher. ++FGREP=$lt_FGREP + +-fi ++# A BSD- or MS-compatible name lister. ++NM=$lt_NM + ++# Whether we need soft or hard links. ++LN_S=$lt_LN_S + ++# What is the maximum length of a command? ++max_cmd_len=$max_cmd_len + +-echo "$as_me:$LINENO: checking return type of signal handlers" >&5 +-echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6 +-if test "${ac_cv_type_signal+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-#include +-#ifdef signal +-# undef signal +-#endif +-#ifdef __cplusplus +-extern "C" void (*signal (int, void (*)(int)))(int); +-#else +-void (*signal ()) (); +-#endif ++# Object file suffix (normally "o"). ++objext=$ac_objext + +-int +-main () +-{ +-int i; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_type_signal=void +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Executable file suffix (normally ""). ++exeext=$exeext + +-ac_cv_type_signal=int +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 +-echo "${ECHO_T}$ac_cv_type_signal" >&6 ++# whether the shell understands "unset". ++lt_unset=$lt_unset + +-cat >>confdefs.h <<_ACEOF +-#define RETSIGTYPE $ac_cv_type_signal +-_ACEOF ++# turn spaces into newlines. ++SP2NL=$lt_lt_SP2NL + ++# turn newlines into spaces. ++NL2SP=$lt_lt_NL2SP + +-echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5 +-echo $ECHO_N "checking whether lstat dereferences a symlink specified with a trailing slash... $ECHO_C" >&6 +-if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- rm -f conftest.sym conftest.file +-echo >conftest.file +-if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then +- if test "$cross_compiling" = yes; then +- ac_cv_func_lstat_dereferences_slashed_symlink=no +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-int +-main () +-{ +-struct stat sbuf; +- /* Linux will dereference the symlink and fail. +- That is better in the sense that it means we will not +- have to compile and use the lstat wrapper. */ +- exit (lstat ("conftest.sym/", &sbuf) ? 0 : 1); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_lstat_dereferences_slashed_symlink=yes +-else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds + +-( exit $ac_status ) +-ac_cv_func_lstat_dereferences_slashed_symlink=no +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +-fi +-else +- # If the `ln -s' command failed, then we probably don't even +- # have an lstat function. +- ac_cv_func_lstat_dereferences_slashed_symlink=no +-fi +-rm -f conftest.sym conftest.file ++# An object symbol dumper. ++OBJDUMP=$lt_OBJDUMP + +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 +-echo "${ECHO_T}$ac_cv_func_lstat_dereferences_slashed_symlink" >&6 ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method + +-test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && ++# Command to use when deplibs_check_method == "file_magic". ++file_magic_cmd=$lt_file_magic_cmd + +-cat >>confdefs.h <<_ACEOF +-#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 +-_ACEOF ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS + ++# A symbol stripping program. ++STRIP=$lt_STRIP + +-if test $ac_cv_func_lstat_dereferences_slashed_symlink = no; then +- case $LIBOBJS in +- "lstat.$ac_objext" | \ +- *" lstat.$ac_objext" | \ +- "lstat.$ac_objext "* | \ +- *" lstat.$ac_objext "* ) ;; +- *) LIBOBJS="$LIBOBJS lstat.$ac_objext" ;; +-esac ++# Commands used to install an old-style archive. ++RANLIB=$lt_RANLIB ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds + +-fi ++# A C compiler. ++LTCC=$lt_CC + +-echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5 +-echo $ECHO_N "checking whether stat accepts an empty string... $ECHO_C" >&6 +-if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then +- ac_cv_func_stat_empty_string_bug=yes +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-int +-main () +-{ +-struct stat sbuf; +- exit (stat ("", &sbuf) ? 1 : 0); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_stat_empty_string_bug=yes +-else +- echo "$as_me: program exited with status $ac_status" >&5 +-echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# LTCC compiler flags. ++LTCFLAGS=$lt_CFLAGS + +-( exit $ac_status ) +-ac_cv_func_stat_empty_string_bug=no +-fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +-fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5 +-echo "${ECHO_T}$ac_cv_func_stat_empty_string_bug" >&6 +-if test $ac_cv_func_stat_empty_string_bug = yes; then +- case $LIBOBJS in +- "stat.$ac_objext" | \ +- *" stat.$ac_objext" | \ +- "stat.$ac_objext "* | \ +- *" stat.$ac_objext "* ) ;; +- *) LIBOBJS="$LIBOBJS stat.$ac_objext" ;; +-esac ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + ++# Transform the output of nm in a proper C declaration. ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +-cat >>confdefs.h <<_ACEOF +-#define HAVE_STAT_EMPTY_STRING_BUG 1 +-_ACEOF ++# Transform the output of nm in a C name address pair. ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +-fi ++# Transform the output of nm in a C name address pair when lib prefix is needed. ++global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir + +-for ac_func in vprintf +-do +-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define $ac_func to an innocuous variant, in case declares $ac_func. +- For example, HP-UX 11i declares gettimeofday. */ +-#define $ac_func innocuous_$ac_func ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++# An echo program that does not interpret backslashes. ++ECHO=$lt_ECHO + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++# Used to examine libraries when file_magic_cmd begins with "file". ++MAGIC_CMD=$MAGIC_CMD + ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks + ++# Tool to manipulate archived DWARF debug symbol files on Mac OS X. ++DSYMUTIL=$lt_DSYMUTIL + -+# _LT_ENABLE_FAST_INSTALL([DEFAULT]) -+# ---------------------------------- -+# implement the --enable-fast-install flag, and support the `fast-install' -+# and `disable-fast-install' LT_INIT options. -+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -+m4_define([_LT_ENABLE_FAST_INSTALL], -+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl -+AC_ARG_ENABLE([fast-install], -+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], -+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], -+ [p=${PACKAGE-default} -+ case $enableval in -+ yes) enable_fast_install=yes ;; -+ no) enable_fast_install=no ;; -+ *) -+ enable_fast_install=no -+ # Look at the argument we got. We use all the common list separators. -+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," -+ for pkg in $enableval; do -+ IFS="$lt_save_ifs" -+ if test "X$pkg" = "X$p"; then -+ enable_fast_install=yes -+ fi -+ done -+ IFS="$lt_save_ifs" -+ ;; -+ esac], -+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) ++# Tool to change global to local symbols on Mac OS X. ++NMEDIT=$lt_NMEDIT + +-#undef $ac_func ++# Tool to manipulate fat objects and archives on Mac OS X. ++LIPO=$lt_LIPO + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} +-#endif ++# ldd/readelf like tool for Mach-O binaries on Mac OS X. ++OTOOL=$lt_OTOOL + +-int +-main () +-{ +-return f != $ac_func; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- eval "$as_ac_var=yes" +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. ++OTOOL64=$lt_OTOOL64 + +-eval "$as_ac_var=no" +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +-if test `eval echo '${'$as_ac_var'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +-_ACEOF ++# Old archive suffix (normally "a"). ++libext=$libext + +-echo "$as_me:$LINENO: checking for _doprnt" >&5 +-echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6 +-if test "${ac_cv_func__doprnt+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define _doprnt to an innocuous variant, in case declares _doprnt. +- For example, HP-UX 11i declares gettimeofday. */ +-#define _doprnt innocuous__doprnt ++# Shared library suffix (normally ".so"). ++shrext_cmds=$lt_shrext_cmds + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char _doprnt (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at link time. ++variables_saved_for_relink=$lt_variables_saved_for_relink + +-#undef _doprnt ++# Do we need the "lib" prefix for modules? ++need_lib_prefix=$need_lib_prefix + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char _doprnt (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub__doprnt) || defined (__stub____doprnt) +-choke me +-#else +-char (*f) () = _doprnt; +-#endif +-#ifdef __cplusplus +-} +-#endif ++# Do we need a version for libraries? ++need_version=$need_version + +-int +-main () +-{ +-return f != _doprnt; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func__doprnt=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Library versioning type. ++version_type=$version_type + +-ac_cv_func__doprnt=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5 +-echo "${ECHO_T}$ac_cv_func__doprnt" >&6 +-if test $ac_cv_func__doprnt = yes; then ++# Shared library runtime path variable. ++runpath_var=$runpath_var + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_DOPRNT 1 +-_ACEOF ++# Shared library path variable. ++shlibpath_var=$shlibpath_var + +-fi ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +-fi +-done ++# Format of library name prefix. ++libname_spec=$lt_libname_spec + ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME ++library_names_spec=$lt_library_names_spec + ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec + ++# Command to use after installation of a shared archive. ++postinstall_cmds=$lt_postinstall_cmds + ++# Command to use after uninstallation of a shared archive. ++postuninstall_cmds=$lt_postuninstall_cmds + ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds + ++# As "finish_cmds", except a single script fragment to be evaled but ++# not shown. ++finish_eval=$lt_finish_eval + ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs + ++# Compile-time system search path for libraries. ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + ++# Run-time system search path for libraries. ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen + ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self + ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static + ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib + + ++# The linker used to build libraries. ++LD=$lt_LD + +-for ac_func in alarm atexit dup2 memset strchr strcspn strpbrk strrchr strspn strstr strtol strtoul sysinfo uname +-do +-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define $ac_func to an innocuous variant, in case declares $ac_func. +- For example, HP-UX 11i declares gettimeofday. */ +-#define $ac_func innocuous_$ac_func ++# Commands used to build an old-style archive. ++old_archive_cmds=$lt_old_archive_cmds + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++# A language specific compiler. ++CC=$lt_compiler + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++# Is the compiler the GNU compiler? ++with_gcc=$GCC + +-#undef $ac_func ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char $ac_func (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +-choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} +-#endif ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl + +-int +-main () +-{ +-return f != $ac_func; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" +- || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- eval "$as_ac_var=yes" +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic + +-eval "$as_ac_var=no" +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +-if test `eval echo '${'$as_ac_var'}'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +-_ACEOF ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static + +-fi +-done ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o + ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc + +- ac_config_files="$ac_config_files Makefile raideng/Makefile raidutil/Makefile lib/Makefile distribution/raidutils.spec" ++# Whether or not to disallow shared libs when runtime libs are static. ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +-cat >confcache <<\_ACEOF +-# This file is a shell script that caches the results of configure +-# tests run on this system so they can be shared between configure +-# scripts and configure runs, see configure's option --config-cache. +-# It is not useful on other systems. If it contains results you don't +-# want to keep, you may remove or edit it. +-# +-# config.status only pays attention to the cache file if you give it +-# the --recheck option to rerun configure. +-# +-# `ac_cv_env_foo' variables (set or unset) will be overridden when +-# loading this file, other *unset* `ac_cv_foo' will be assigned the +-# following values. ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +-_ACEOF ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec + +-# The following way of writing the cache mishandles newlines in values, +-# but we know of no workaround that is simple, portable, and efficient. +-# So, don't put newlines in cache variables' values. +-# Ultrix sh set writes to stderr and can't be redirected directly, +-# and sets the high bit in the cache file unless we assign to the vars. +-{ +- (set) 2>&1 | +- case `(ac_space=' '; set | grep ac_space) 2>&1` in +- *ac_space=\ *) +- # `set' does not quote correctly, so add quotes (double-quote +- # substitution turns \\\\ into \\, and sed turns \\ into \). +- sed -n \ +- "s/'/'\\\\''/g; +- s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='\\2'/p" +- ;; +- *) +- # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n \ +- "s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1=\\2/p" +- ;; +- esac; +-} | +- sed ' +- t clear +- : clear +- s/^$[^=]*$=$.*[{}].*$$/test "${\1+set}" = set || &/ +- t end +- /^ac_cv_env/!s/^$[^=]*$=$.*$$/\1=${\1=\2}/ +- : end' >>confcache +-if diff $cache_file confcache >/dev/null 2>&1; then :; else +- if test -w $cache_file; then +- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" +- cat confcache >$cache_file +- else +- echo "not updating unwritable cache $cache_file" +- fi +-fi +-rm -f confcache ++# Whether the compiler copes with passing no objects directly. ++compiler_needs_object=$lt_compiler_needs_object + +-test "x$prefix" = xNONE && prefix=$ac_default_prefix +-# Let make expand exec_prefix. +-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +-# trailing colons and then remove the whole line if VPATH becomes empty +-# (actually we leave an empty line to preserve line numbers). +-if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/; +-s/:*\${srcdir}:*/:/; +-s/:*@srcdir@:*/:/; +-s/^$[^=]*=[ ]*$:*/\1/; +-s/:*$//; +-s/^[^=]*=[ ]*$//; +-}' +-fi ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +-DEFS=-DHAVE_CONFIG_H ++# Commands used to build a shared archive. ++archive_cmds=$lt_archive_cmds ++archive_expsym_cmds=$lt_archive_expsym_cmds + +-ac_libobjs= +-ac_ltlibobjs= +-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue +- # 1. Remove the extension, and $U if already installed. +- ac_i=`echo "$ac_i" | +- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` +- # 2. Add them. +- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +-done +-LIBOBJS=$ac_libobjs ++# Commands used to build a loadable module if different from building ++# a shared archive. ++module_cmds=$lt_module_cmds ++module_expsym_cmds=$lt_module_expsym_cmds + +-LTLIBOBJS=$ac_ltlibobjs ++# Whether we are building with GNU ld or not. ++with_gnu_ld=$lt_with_gnu_ld + ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag + +-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"AMDEP\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then +- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi ++# Flag that enforces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag + -+_LT_DECL([fast_install], [enable_fast_install], [0], -+ [Whether or not to optimize for fast installation])dnl -+])# _LT_ENABLE_FAST_INSTALL ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +-: ${CONFIG_STATUS=./config.status} +-ac_clean_files_save=$ac_clean_files +-ac_clean_files="$ac_clean_files $CONFIG_STATUS" +-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +-echo "$as_me: creating $CONFIG_STATUS" >&6;} +-cat >$CONFIG_STATUS <<_ACEOF +-#! $SHELL +-# Generated by $as_me. +-# Run this file to recreate the current configuration. +-# Compiler output produced by configure, useful for debugging +-# configure, is in config.log if it exists. ++# If ld is used when linking, flag to hardcode \$libdir into a binary ++# during linking. This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +-debug=false +-ac_cs_recheck=false +-ac_cs_silent=false +-SHELL=\${CONFIG_SHELL-$SHELL} +-_ACEOF ++# Whether we need a single "-rpath" flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator + +-cat >>$CONFIG_STATUS <<\_ACEOF +-## --------------------- ## +-## M4sh Initialization. ## +-## --------------------- ## ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary. ++hardcode_direct=$hardcode_direct + +-# Be Bourne compatible +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix +-fi +-DUALCASE=1; export DUALCASE # for MKS sh ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary and the resulting library dependency is ++# "absolute",i.e impossible to change by setting \${shlibpath_var} if the ++# library is relocated. ++hardcode_direct_absolute=$hardcode_direct_absolute + +-# Support unset when possible. +-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +- as_unset=unset +-else +- as_unset=false +-fi ++# Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++# into the resulting binary. ++hardcode_minus_L=$hardcode_minus_L + ++# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++# into the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var + +-# Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH +-PS1='$ ' +-PS2='> ' +-PS4='+ ' ++# Set to "yes" if building a shared library automatically hardcodes DIR ++# into the library and all subsequent libraries and executables linked ++# against it. ++hardcode_automatic=$hardcode_automatic + +-# NLS nuisances. +-for as_var in \ +- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ +- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ +- LC_TELEPHONE LC_TIME +-do +- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then +- eval $as_var=C; export $as_var +- else +- $as_unset $as_var +- fi +-done ++# Set to yes if linker adds runtime paths of dependent libraries ++# to runtime path list. ++inherit_rpath=$inherit_rpath + +-# Required to use basename. +-if expr a : '$a$' >/dev/null 2>&1; then +- as_expr=expr +-else +- as_expr=false +-fi ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +- as_basename=basename +-else +- as_basename=false +-fi ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path=$lt_fix_srcfile_path + ++# Set to "yes" if exported symbols are required. ++always_export_symbols=$always_export_symbols + +-# Name of the executable. +-as_me=`$as_basename "$0" || +-$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \ +- X"$0" : 'X$//$$' \| \ +- X"$0" : 'X$/$$' \| \ +- . : '$.$' 2>/dev/null || +-echo X/"$0" | +- sed '/^.*\/$[^/][^/]*$\/*$/{ s//\1/; q; } +- /^X\/$\/\/$$/{ s//\1/; q; } +- /^X\/$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds + ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms + +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh +-fi ++# Commands necessary for linking programs (against libraries) with templates. ++prelink_cmds=$lt_prelink_cmds + ++# Specify filename containing input files. ++file_list_spec=$lt_file_list_spec + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in +- /*) +- if ("$as_dir/$as_base" -c ' +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++# The directories searched by this compiler when creating a shared library. ++compiler_lib_search_dirs=$lt_compiler_lib_search_dirs + +- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO +- # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. +- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | +- sed ' +- N +- s,$,-, +- : loop +- s,^$['$as_cr_digits']*$$.*$[$]LINENO$[^'$as_cr_alnum'_]$,\1\2\1\3, +- t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, +- ' >$as_me.lineno && +- chmod +x $as_me.lineno || +- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} +- { (exit 1); exit 1; }; } ++# Dependencies to place before and after the objects being linked to ++# create a shared library. ++predep_objects=$lt_predep_objects ++postdep_objects=$lt_postdep_objects ++predeps=$lt_predeps ++postdeps=$lt_postdeps + +- # Don't try to exec as it changes $[0], causing all sort of problems +- # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno +- # Exit status is that of the last command. +- exit +-} ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path + ++# ### END LIBTOOL CONFIG + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +-esac ++_LT_EOF + +-if expr a : '$a$' >/dev/null 2>&1; then +- as_expr=expr +-else +- as_expr=false ++ case $host_os in ++ aix3*) ++ cat <<\_LT_EOF >> "$cfgfile" ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES + fi ++_LT_EOF ++ ;; ++ esac + +-rm -f conf$$ conf$$.exe conf$$.file +-echo >conf$$.file +-if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links +- as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi +-elif ln conf$$.file conf$$ 2>/dev/null; then +- as_ln_s=ln +-else +- as_ln_s='cp -p' +-fi +-rm -f conf$$ conf$$.exe conf$$.file + +-if mkdir -p . 2>/dev/null; then +- as_mkdir_p=: +-else +- test -d ./-p && rmdir ./-p +- as_mkdir_p=false +-fi ++ltmain="$ac_aux_dir/ltmain.sh" + +-as_executable_p="test -f" + +-# Sed expression to map a string onto a valid CPP name. +-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) + +-# Sed expression to map a string onto a valid variable name. +-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++ case $xsi_shell in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" + ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++} + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" ++# func_basename file ++func_basename () ++{ ++ func_basename_result="${1##*/}" ++} + +-# CDPATH. +-$as_unset CDPATH ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++ func_basename_result="${1##*/}" ++} + +-exec 6>&1 ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++func_stripname () ++{ ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"} ++} + +-# Open the log real soon, to keep \$[0] and so on meaningful, and to +-# report actual input values of CONFIG_FILES etc. instead of their +-# values after options handling. Logging --version etc. is OK. +-exec 5>>config.log ++# func_opt_split ++func_opt_split () + { +- echo +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +-## Running $as_me. ## +-_ASBOX +-} >&5 +-cat >&5 <<_CSEOF ++ func_opt_split_opt=${1%%=*} ++ func_opt_split_arg=${1#*=} ++} + +-This file was extended by I2O RAID Utilities $as_me 0.0.6, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++# func_lo2o object ++func_lo2o () ++{ ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; ++ esac ++} + +- CONFIG_FILES = $CONFIG_FILES +- CONFIG_HEADERS = $CONFIG_HEADERS +- CONFIG_LINKS = $CONFIG_LINKS +- CONFIG_COMMANDS = $CONFIG_COMMANDS +- $ $0 $@ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=${1%.*}.lo ++} + +-_CSEOF +-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +-echo >&5 +-_ACEOF ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=$(( $* )) ++} + +-# Files that config.status was made for. +-if test -n "$ac_config_files"; then +- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +-fi ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=${#1} ++} + +-if test -n "$ac_config_headers"; then +- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +-fi ++_LT_EOF ++ ;; ++ *) # Bourne compatible functions. ++ cat << \_LT_EOF >> "$cfgfile" + +-if test -n "$ac_config_links"; then +- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +-fi ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++} + +-if test -n "$ac_config_commands"; then +- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +-fi ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} + +-cat >>$CONFIG_STATUS <<\_ACEOF + +-ac_cs_usage="\ +-\`$as_me' instantiates files from templates according to the +-current configuration. ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; ++ esac ++} + +-Usage: $0 [OPTIONS] [FILE]... ++# sed scripts: ++my_sed_long_opt='1s/^$-[^=]*$=.*/\1/;q' ++my_sed_long_arg='1s/^-[^=]*=//' + +- -h, --help print this help, then exit +- -V, --version print version number, then exit +- -q, --quiet do not print progress messages +- -d, --debug don't remove temporary files +- --recheck update $as_me by reconfiguring in the same conditions +- --file=FILE[:TEMPLATE] +- instantiate the configuration file FILE +- --header=FILE[:TEMPLATE] +- instantiate the configuration header FILE ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` ++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` ++} + +-Configuration files: +-$config_files ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` ++} + +-Configuration headers: +-$config_headers ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` ++} + +-Configuration commands: +-$config_commands ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "$@"` ++} + +-Report bugs to ." +-_ACEOF ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` ++} + +-cat >>$CONFIG_STATUS <<_ACEOF +-ac_cs_version="\\ +-I2O RAID Utilities config.status 0.0.6 +-configured by $0, generated by GNU Autoconf 2.59, +- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" ++_LT_EOF ++esac + +-Copyright (C) 2003 Free Software Foundation, Inc. +-This config.status script is free software; the Free Software Foundation +-gives unlimited permission to copy, distribute and modify it." +-srcdir=$srcdir +-INSTALL="$INSTALL" +-_ACEOF ++case $lt_shell_append in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" + +-cat >>$CONFIG_STATUS <<\_ACEOF +-# If no file are specified by the user, then we need to provide default +-# value. By we need to know if files were specified by the user. +-ac_need_defaults=: +-while test $# != 0 +-do +- case $1 in +- --*=*) +- ac_option=`expr "x$1" : 'x$[^=]*$='` +- ac_optarg=`expr "x$1" : 'x[^=]*=$.*$'` +- ac_shift=: ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1+=\$2" ++} ++_LT_EOF + ;; +- -*) +- ac_option=$1 +- ac_optarg=$2 +- ac_shift=shift ++ *) ++ cat << \_LT_EOF >> "$cfgfile" + -+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) -+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1=\$$1\$2" ++} + -+# Old names: -+AU_DEFUN([AC_ENABLE_FAST_INSTALL], -+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -+AC_DIAGNOSE([obsolete], -+[$0: Remove this warning and the call to _LT_SET_OPTION when you put -+the `fast-install' option into LT_INIT's first parameter.]) -+]) ++_LT_EOF + ;; +- *) # This is not an option, so the user has probably given explicit +- # arguments. +- ac_option=$1 +- ac_need_defaults=false;; + esac + +- case $ac_option in +- # Handling of the options. +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) +- ac_cs_recheck=: ;; +- --version | --vers* | -V ) +- echo "$ac_cs_version"; exit 0 ;; +- --he | --h) +- # Conflict between --help and --header +- { { echo "$as_me:$LINENO: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&2;} +- { (exit 1); exit 1; }; };; +- --help | --hel | -h ) +- echo "$ac_cs_usage"; exit 0 ;; +- --debug | --d* | -d ) +- debug=: ;; +- --file | --fil | --fi | --f ) +- $ac_shift +- CONFIG_FILES="$CONFIG_FILES $ac_optarg" +- ac_need_defaults=false;; +- --header | --heade | --head | --hea ) +- $ac_shift +- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" +- ac_need_defaults=false;; +- -q | -quiet | --quiet | --quie | --qui | --qu | --q \ +- | -silent | --silent | --silen | --sile | --sil | --si | --s) +- ac_cs_silent=: ;; + +- # This is an error. +- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2;} +- { (exit 1); exit 1; }; } ;; ++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) + -+AU_DEFUN([AC_DISABLE_FAST_INSTALL], -+[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -+AC_DIAGNOSE([obsolete], -+[$0: Remove this warning and the call to _LT_SET_OPTION when you put -+the `disable-fast-install' option into LT_INIT's first parameter.]) -+]) ++ mv -f "$cfgfile" "$ofile" || ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" + +- *) ac_config_targets="$ac_config_targets $1" ;; + +- esac +- shift +-done ++ cat <<_LT_EOF >> "$ofile" + +-ac_configure_extra_args= ++# ### BEGIN LIBTOOL TAG CONFIG: CXX + +-if $ac_cs_silent; then +- exec 6>/dev/null +- ac_configure_extra_args="$ac_configure_extra_args --silent" +-fi ++# The linker used to build libraries. ++LD=$lt_LD_CXX + +-_ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF +-if \$ac_cs_recheck; then +- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 +- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +-fi ++# Commands used to build an old-style archive. ++old_archive_cmds=$lt_old_archive_cmds_CXX + +-_ACEOF ++# A language specific compiler. ++CC=$lt_compiler_CXX + +-cat >>$CONFIG_STATUS <<_ACEOF +-# +-# INIT-COMMANDS section. +-# ++# Is the compiler the GNU compiler? ++with_gcc=$GCC_CXX + +-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX + +-_ACEOF ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl_CXX + ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic_CXX + ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static_CXX + +-cat >>$CONFIG_STATUS <<\_ACEOF +-for ac_config_target in $ac_config_targets +-do +- case "$ac_config_target" in +- # Handling of arguments. +- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; +- "raideng/Makefile" ) CONFIG_FILES="$CONFIG_FILES raideng/Makefile" ;; +- "raidutil/Makefile" ) CONFIG_FILES="$CONFIG_FILES raidutil/Makefile" ;; +- "lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; +- "distribution/raidutils.spec" ) CONFIG_FILES="$CONFIG_FILES distribution/raidutils.spec" ;; +- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; +- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; +- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +-echo "$as_me: error: invalid argument: $ac_config_target" >&2;} +- { (exit 1); exit 1; }; };; +- esac +-done ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX + +-# If the user did not use the arguments to specify the items to instantiate, +-# then the envvar interface is used. Set only those that are not. +-# We use the long form for the default assignment because of an extremely +-# bizarre bug on SunOS 4.1.3. +-if $ac_need_defaults; then +- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers +- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +-fi ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc_CXX + +-# Have a temporary directory for convenience. Make it in the build tree +-# simply because there is no reason to put it here, and in addition, +-# creating and moving files from /tmp can sometimes cause problems. +-# Create a temporary directory, and hook for its removal unless debugging. +-$debug || +-{ +- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 +- trap '{ (exit 1); exit 1; }' 1 2 13 15 +-} ++# Whether or not to disallow shared libs when runtime libs are static. ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX + +-# Create a (secure) tmp directory for tmp files. ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX + +-{ +- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && +- test -n "$tmp" && test -d "$tmp" +-} || +-{ +- tmp=./confstat$$-$RANDOM +- (umask 077 && mkdir $tmp) +-} || +-{ +- echo "$me: cannot create a temporary directory in ." >&2 +- { (exit 1); exit 1; } +-} ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX + +-_ACEOF ++# Whether the compiler copes with passing no objects directly. ++compiler_needs_object=$lt_compiler_needs_object_CXX + +-cat >>$CONFIG_STATUS <<_ACEOF ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX + +-# +-# CONFIG_FILES section. +-# ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX + +-# No need to generate the scripts if there are no CONFIG_FILES. +-# This happens for instance when ./config.status config.h +-if test -n "\$CONFIG_FILES"; then +- # Protect against being on the right side of a sed subst in config.status. +- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; +- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +-s,@SHELL@,$SHELL,;t t +-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +-s,@exec_prefix@,$exec_prefix,;t t +-s,@prefix@,$prefix,;t t +-s,@program_transform_name@,$program_transform_name,;t t +-s,@bindir@,$bindir,;t t +-s,@sbindir@,$sbindir,;t t +-s,@libexecdir@,$libexecdir,;t t +-s,@datadir@,$datadir,;t t +-s,@sysconfdir@,$sysconfdir,;t t +-s,@sharedstatedir@,$sharedstatedir,;t t +-s,@localstatedir@,$localstatedir,;t t +-s,@libdir@,$libdir,;t t +-s,@includedir@,$includedir,;t t +-s,@oldincludedir@,$oldincludedir,;t t +-s,@infodir@,$infodir,;t t +-s,@mandir@,$mandir,;t t +-s,@build_alias@,$build_alias,;t t +-s,@host_alias@,$host_alias,;t t +-s,@target_alias@,$target_alias,;t t +-s,@DEFS@,$DEFS,;t t +-s,@ECHO_C@,$ECHO_C,;t t +-s,@ECHO_N@,$ECHO_N,;t t +-s,@ECHO_T@,$ECHO_T,;t t +-s,@LIBS@,$LIBS,;t t +-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +-s,@INSTALL_DATA@,$INSTALL_DATA,;t t +-s,@CYGPATH_W@,$CYGPATH_W,;t t +-s,@PACKAGE@,$PACKAGE,;t t +-s,@VERSION@,$VERSION,;t t +-s,@ACLOCAL@,$ACLOCAL,;t t +-s,@AUTOCONF@,$AUTOCONF,;t t +-s,@AUTOMAKE@,$AUTOMAKE,;t t +-s,@AUTOHEADER@,$AUTOHEADER,;t t +-s,@MAKEINFO@,$MAKEINFO,;t t +-s,@install_sh@,$install_sh,;t t +-s,@STRIP@,$STRIP,;t t +-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t +-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t +-s,@mkdir_p@,$mkdir_p,;t t +-s,@AWK@,$AWK,;t t +-s,@SET_MAKE@,$SET_MAKE,;t t +-s,@am__leading_dot@,$am__leading_dot,;t t +-s,@AMTAR@,$AMTAR,;t t +-s,@am__tar@,$am__tar,;t t +-s,@am__untar@,$am__untar,;t t +-s,@CXX@,$CXX,;t t +-s,@CXXFLAGS@,$CXXFLAGS,;t t +-s,@LDFLAGS@,$LDFLAGS,;t t +-s,@CPPFLAGS@,$CPPFLAGS,;t t +-s,@ac_ct_CXX@,$ac_ct_CXX,;t t +-s,@EXEEXT@,$EXEEXT,;t t +-s,@OBJEXT@,$OBJEXT,;t t +-s,@DEPDIR@,$DEPDIR,;t t +-s,@am__include@,$am__include,;t t +-s,@am__quote@,$am__quote,;t t +-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t +-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t +-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t +-s,@CXXDEPMODE@,$CXXDEPMODE,;t t +-s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t +-s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t +-s,@CC@,$CC,;t t +-s,@CFLAGS@,$CFLAGS,;t t +-s,@ac_ct_CC@,$ac_ct_CC,;t t +-s,@CCDEPMODE@,$CCDEPMODE,;t t +-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t +-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t +-s,@CPP@,$CPP,;t t +-s,@build@,$build,;t t +-s,@build_cpu@,$build_cpu,;t t +-s,@build_vendor@,$build_vendor,;t t +-s,@build_os@,$build_os,;t t +-s,@host@,$host,;t t +-s,@host_cpu@,$host_cpu,;t t +-s,@host_vendor@,$host_vendor,;t t +-s,@host_os@,$host_os,;t t +-s,@EGREP@,$EGREP,;t t +-s,@LN_S@,$LN_S,;t t +-s,@ECHO@,$ECHO,;t t +-s,@AR@,$AR,;t t +-s,@ac_ct_AR@,$ac_ct_AR,;t t +-s,@RANLIB@,$RANLIB,;t t +-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +-s,@CXXCPP@,$CXXCPP,;t t +-s,@F77@,$F77,;t t +-s,@FFLAGS@,$FFLAGS,;t t +-s,@ac_ct_F77@,$ac_ct_F77,;t t +-s,@LIBTOOL@,$LIBTOOL,;t t +-s,@LIBOBJS@,$LIBOBJS,;t t +-s,@LTLIBOBJS@,$LTLIBOBJS,;t t +-CEOF +- +-_ACEOF +- +- cat >>$CONFIG_STATUS <<\_ACEOF +- # Split the substitutions into bite-sized pieces for seds with +- # small command number limits, like on Digital OSF/1 and HP-UX. +- ac_max_sed_lines=48 +- ac_sed_frag=1 # Number of current file. +- ac_beg=1 # First line for current file. +- ac_end=$ac_max_sed_lines # Line after last line for current file. +- ac_more_lines=: +- ac_sed_cmds= +- while $ac_more_lines; do +- if test $ac_beg -gt 1; then +- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- else +- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- fi +- if test ! -s $tmp/subs.frag; then +- ac_more_lines=false +- else +- # The purpose of the label and of the branching condition is to +- # speed up the sed processing (if there are no `@' at all, there +- # is no need to browse any of the substitutions). +- # These are the two extra sed commands mentioned above. +- (echo ':t +- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" +- else +- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" +- fi +- ac_sed_frag=`expr $ac_sed_frag + 1` +- ac_beg=$ac_end +- ac_end=`expr $ac_end + $ac_max_sed_lines` +- fi +- done +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds=cat +- fi +-fi # test -n "$CONFIG_FILES" ++# Commands used to build a shared archive. ++archive_cmds=$lt_archive_cmds_CXX ++archive_expsym_cmds=$lt_archive_expsym_cmds_CXX + +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; +- esac ++# Commands used to build a loadable module if different from building ++# a shared archive. ++module_cmds=$lt_module_cmds_CXX ++module_expsym_cmds=$lt_module_expsym_cmds_CXX + +- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. +- ac_dir=`(dirname "$ac_file") 2>/dev/null || +-$as_expr X"$ac_file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ +- X"$ac_file" : 'X$//$[^/]' \| \ +- X"$ac_file" : 'X$//$$' \| \ +- X"$ac_file" : 'X$/$' \| \ +- . : '$.$' 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X$\/\/$[^/].*/{ s//\1/; q; } +- /^X$\/\/$$/{ s//\1/; q; } +- /^X$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X$//$[^/]' \| \ +- X"$as_dir" : 'X$//$$' \| \ +- X"$as_dir" : 'X$/$' \| \ +- . : '$.$' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X$\/\/$[^/].*/{ s//\1/; q; } +- /^X$\/\/$$/{ s//\1/; q; } +- /^X$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } ++# Whether we are building with GNU ld or not. ++with_gnu_ld=$lt_with_gnu_ld_CXX + +- ac_builddir=. ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag_CXX + +-if test "$ac_dir" != .; then +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++# Flag that enforces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag_CXX + +-case $srcdir in +- .) # No --srcdir option. We are building in place. +- ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. +- ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac ++# If ld is used when linking, flag to hardcode \$libdir into a binary ++# during linking. This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX + ++# Whether we need a single "-rpath" flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX + +- case $INSTALL in +- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; +- *) ac_INSTALL=$ac_top_builddir$INSTALL ;; +- esac ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary. ++hardcode_direct=$hardcode_direct_CXX + +- if test x"$ac_file" != x-; then +- { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- rm -f "$ac_file" +- fi +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- configure_input= +- else +- configure_input="$ac_file. " +- fi +- configure_input=$configure_input"Generated from `echo $ac_file_in | +- sed 's,.*/,,'` by configure." ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary and the resulting library dependency is ++# "absolute",i.e impossible to change by setting \${shlibpath_var} if the ++# library is relocated. ++hardcode_direct_absolute=$hardcode_direct_absolute_CXX + +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } +-_ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF +- sed "$ac_vpsub +-$extrasub +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +-:t +-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s,@configure_input@,$configure_input,;t t +-s,@srcdir@,$ac_srcdir,;t t +-s,@abs_srcdir@,$ac_abs_srcdir,;t t +-s,@top_srcdir@,$ac_top_srcdir,;t t +-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +-s,@builddir@,$ac_builddir,;t t +-s,@abs_builddir@,$ac_abs_builddir,;t t +-s,@top_builddir@,$ac_top_builddir,;t t +-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +-s,@INSTALL@,$ac_INSTALL,;t t +-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out +- rm -f $tmp/stdin +- if test x"$ac_file" != x-; then +- mv $tmp/out $ac_file +- else +- cat $tmp/out +- rm -f $tmp/out +- fi ++# Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++# into the resulting binary. ++hardcode_minus_L=$hardcode_minus_L_CXX + +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF ++# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++# into the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX + +-# +-# CONFIG_HEADER section. +-# ++# Set to "yes" if building a shared library automatically hardcodes DIR ++# into the library and all subsequent libraries and executables linked ++# against it. ++hardcode_automatic=$hardcode_automatic_CXX + +-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +-# NAME is the cpp macro being defined and VALUE is the value it is being given. +-# +-# ac_d sets the value in "#define NAME VALUE" lines. +-ac_dA='s,^$[ ]*$#$[ ]*define[ ][ ]*$' +-ac_dB='[ ].*$,\1#\2' +-ac_dC=' ' +-ac_dD=',;t' +-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +-ac_uA='s,^$[ ]*$#$[ ]*$undef$[ ][ ]*$' +-ac_uB='$,\1#\2define\3' +-ac_uC=' ' +-ac_uD=',;t' ++# Set to yes if linker adds runtime paths of dependent libraries ++# to runtime path list. ++inherit_rpath=$inherit_rpath_CXX + +-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; +- esac ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs_CXX + +- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path=$lt_fix_srcfile_path_CXX + +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- # Do quote $f, to prevent DOS paths from being IFS'd. +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } +- # Remove the trailing spaces. +- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in ++# Set to "yes" if exported symbols are required. ++always_export_symbols=$always_export_symbols_CXX + +-_ACEOF ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds_CXX + +-# Transform confdefs.h into two sed scripts, `conftest.defines' and +-# `conftest.undefs', that substitutes the proper values into +-# config.h.in to produce config.h. The first handles `#define' +-# templates, and the second `#undef' templates. +-# And first: Protect against being on the right side of a sed subst in +-# config.status. Protect against being in an unquoted here document +-# in config.status. +-rm -f conftest.defines conftest.undefs +-# Using a here document instead of a string reduces the quoting nightmare. +-# Putting comments in sed scripts is not portable. +-# +-# `end' is used to avoid that the second main sed command (meant for +-# 0-ary CPP macros) applies to n-ary macro definitions. +-# See the Autoconf documentation for `clear'. +-cat >confdef2sed.sed <<\_ACEOF +-s/[\\&,]/\\&/g +-s,[\\$`],\\&,g +-t clear +-: clear +-s,^[ ]*#[ ]*define[ ][ ]*$[^ (][^ (]*$$([^)]*)$[ ]*$.*$$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +-t end +-s,^[ ]*#[ ]*define[ ][ ]*$[^ ][^ ]*$[ ]*$.*$$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +-: end +-_ACEOF +-# If some macros were called several times there might be several times +-# the same #defines, which is useless. Nevertheless, we may not want to +-# sort them, since we want the *last* AC-DEFINE to be honored. +-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +-rm -f confdef2sed.sed +- +-# This sed command replaces #undef with comments. This is necessary, for +-# example, in the case of _POSIX_SOURCE, which is predefined and required +-# on some systems where configure will not decide to define it. +-cat >>conftest.undefs <<\_ACEOF +-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +-_ACEOF +- +-# Break up conftest.defines because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +-echo ' :' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.defines >/dev/null +-do +- # Write a limited-size here document to $tmp/defines.sed. +- echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#define' lines. +- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS +- echo 'CEOF +- sed -f $tmp/defines.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail +- rm -f conftest.defines +- mv conftest.tail conftest.defines +-done +-rm -f conftest.defines +-echo ' fi # grep' >>$CONFIG_STATUS +-echo >>$CONFIG_STATUS +- +-# Break up conftest.undefs because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.undefs >/dev/null +-do +- # Write a limited-size here document to $tmp/undefs.sed. +- echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#undef' +- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS +- echo 'CEOF +- sed -f $tmp/undefs.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail +- rm -f conftest.undefs +- mv conftest.tail conftest.undefs +-done +-rm -f conftest.undefs +- +-cat >>$CONFIG_STATUS <<\_ACEOF +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- echo "/* Generated by configure. */" >$tmp/config.h +- else +- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h +- fi +- cat $tmp/in >>$tmp/config.h +- rm -f $tmp/in +- if test x"$ac_file" != x-; then +- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then +- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +-echo "$as_me: $ac_file is unchanged" >&6;} +- else +- ac_dir=`(dirname "$ac_file") 2>/dev/null || +-$as_expr X"$ac_file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ +- X"$ac_file" : 'X$//$[^/]' \| \ +- X"$ac_file" : 'X$//$$' \| \ +- X"$ac_file" : 'X$/$' \| \ +- . : '$.$' 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X$\/\/$[^/].*/{ s//\1/; q; } +- /^X$\/\/$$/{ s//\1/; q; } +- /^X$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X$//$[^/]' \| \ +- X"$as_dir" : 'X$//$$' \| \ +- X"$as_dir" : 'X$/$' \| \ +- . : '$.$' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X$\/\/$[^/].*/{ s//\1/; q; } +- /^X$\/\/$$/{ s//\1/; q; } +- /^X$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms_CXX + +- rm -f $ac_file +- mv $tmp/config.h $ac_file +- fi +- else +- cat $tmp/config.h +- rm -f $tmp/config.h +- fi +-# Compute $ac_file's index in $config_headers. +-_am_stamp_count=1 +-for _am_header in $config_headers :; do +- case $_am_header in +- $ac_file | $ac_file:* ) +- break ;; +- * ) +- _am_stamp_count=`expr $_am_stamp_count + 1` ;; +- esac +-done +-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || +-$as_expr X$ac_file : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ +- X$ac_file : 'X$//$[^/]' \| \ +- X$ac_file : 'X$//$$' \| \ +- X$ac_file : 'X$/$' \| \ +- . : '$.$' 2>/dev/null || +-echo X$ac_file | +- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X$\/\/$[^/].*/{ s//\1/; q; } +- /^X$\/\/$$/{ s//\1/; q; } +- /^X$\/$.*/{ s//\1/; q; } +- s/.*/./; q'`/stamp-h$_am_stamp_count +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms_CXX + +-# +-# CONFIG_COMMANDS section. +-# +-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue +- ac_dest=`echo "$ac_file" | sed 's,:.*,,'` +- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_dir=`(dirname "$ac_dest") 2>/dev/null || +-$as_expr X"$ac_dest" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ +- X"$ac_dest" : 'X$//$[^/]' \| \ +- X"$ac_dest" : 'X$//$$' \| \ +- X"$ac_dest" : 'X$/$' \| \ +- . : '$.$' 2>/dev/null || +-echo X"$ac_dest" | +- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X$\/\/$[^/].*/{ s//\1/; q; } +- /^X$\/\/$$/{ s//\1/; q; } +- /^X$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X$//$[^/]' \| \ +- X"$as_dir" : 'X$//$$' \| \ +- X"$as_dir" : 'X$/$' \| \ +- . : '$.$' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X$\/\/$[^/].*/{ s//\1/; q; } +- /^X$\/\/$$/{ s//\1/; q; } +- /^X$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } ++# Commands necessary for linking programs (against libraries) with templates. ++prelink_cmds=$lt_prelink_cmds_CXX + +- ac_builddir=. ++# Specify filename containing input files. ++file_list_spec=$lt_file_list_spec_CXX + +-if test "$ac_dir" != .; then +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action_CXX + +-case $srcdir in +- .) # No --srcdir option. We are building in place. +- ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. +- ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac ++# The directories searched by this compiler when creating a shared library. ++compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac ++# Dependencies to place before and after the objects being linked to ++# create a shared library. ++predep_objects=$lt_predep_objects_CXX ++postdep_objects=$lt_postdep_objects_CXX ++predeps=$lt_predeps_CXX ++postdeps=$lt_postdeps_CXX + ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path_CXX + +- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 +-echo "$as_me: executing $ac_dest commands" >&6;} +- case $ac_dest in +- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do +- # Strip MF so we end up with the name of the file. +- mf=`echo "$mf" | sed -e 's/:.*$//'` +- # Check whether this is an Automake generated Makefile or not. +- # We used to match only the files named `Makefile.in', but +- # some people rename them; so instead we look at the file content. +- # Grep'ing the first line is not enough: some people post-process +- # each Makefile.in and add a new line on top of each file to say so. +- # So let's grep whole file. +- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then +- dirpart=`(dirname "$mf") 2>/dev/null || +-$as_expr X"$mf" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ +- X"$mf" : 'X$//$[^/]' \| \ +- X"$mf" : 'X$//$$' \| \ +- X"$mf" : 'X$/$' \| \ +- . : '$.$' 2>/dev/null || +-echo X"$mf" | +- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X$\/\/$[^/].*/{ s//\1/; q; } +- /^X$\/\/$$/{ s//\1/; q; } +- /^X$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` +- else +- continue +- fi +- # Extract the definition of DEPDIR, am__include, and am__quote +- # from the Makefile without running `make'. +- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` +- test -z "$DEPDIR" && continue +- am__include=`sed -n 's/^am__include = //p' < "$mf"` +- test -z "am__include" && continue +- am__quote=`sed -n 's/^am__quote = //p' < "$mf"` +- # When using ansi2knr, U may be empty or an underscore; expand it +- U=`sed -n 's/^U = //p' < "$mf"` +- # Find all dependency output files, they are included files with +- # $(DEPDIR) in their names. We invoke sed twice because it is the +- # simplest approach to changing $(DEPDIR) to its actual value in the +- # expansion. +- for file in `sed -n " +- s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \ +- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do +- # Make sure the directory exists. +- test -f "$dirpart/$file" && continue +- fdir=`(dirname "$file") 2>/dev/null || +-$as_expr X"$file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ +- X"$file" : 'X$//$[^/]' \| \ +- X"$file" : 'X$//$$' \| \ +- X"$file" : 'X$/$' \| \ +- . : '$.$' 2>/dev/null || +-echo X"$file" | +- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X$\/\/$[^/].*/{ s//\1/; q; } +- /^X$\/\/$$/{ s//\1/; q; } +- /^X$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p $dirpart/$fdir +- else +- as_dir=$dirpart/$fdir +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X$//$[^/]' \| \ +- X"$as_dir" : 'X$//$$' \| \ +- X"$as_dir" : 'X$/$' \| \ +- . : '$.$' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X$\/\/$[^/].*/{ s//\1/; q; } +- /^X$\/\/$$/{ s//\1/; q; } +- /^X$\/$.*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 +-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} +- { (exit 1); exit 1; }; }; } ++# ### END LIBTOOL TAG CONFIG: CXX ++_LT_EOF + +- # echo "creating $dirpart/$file" +- echo '# dummy' > "$dirpart/$file" +- done +-done + ;; + -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) -+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + esac +-done +-_ACEOF ++done # for ac_tag + +-cat >>$CONFIG_STATUS <<\_ACEOF + +-{ (exit 0); exit 0; } ++as_fn_exit 0 + _ACEOF +-chmod +x $CONFIG_STATUS + ac_clean_files=$ac_clean_files_save + ++test $ac_write_fail = 0 || ++ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + + # configure is writing to config.log, and then calls config.status. + # config.status does its own redirection, appending to config.log. +@@ -23856,6 +18568,10 @@ if test "$no_create" != yes; then + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. +- $ac_cs_success || { (exit 1); exit 1; } ++ $ac_cs_success || as_fn_exit 1 ++fi ++if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 ++$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} + fi + +--- raidutils-0.0.6.orig/Makefile.in ++++ raidutils-0.0.6/Makefile.in +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.9.2 from Makefile.am. ++# Makefile.in generated by automake 1.11.1 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -13,15 +14,12 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +-top_builddir = . ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +-INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -35,30 +33,37 @@ PRE_UNINSTALL = : + POST_UNINSTALL = : + build_triplet = @build@ + host_triplet = @host@ ++subdir = . + DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure \ + $(top_srcdir)/distribution/raidutils.spec.in AUTHORS COPYING \ + ChangeLog INSTALL NEWS compile config.guess config.sub depcomp \ + install-sh ltmain.sh missing +-subdir = . + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/configure.in + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ +- configure.lineno configure.status.lineno ++ configure.lineno config.status.lineno + mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = config.h + CONFIG_CLEAN_FILES = distribution/raidutils.spec ++CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-exec-recursive install-info-recursive \ +- install-recursive installcheck-recursive installdirs-recursive \ +- pdf-recursive ps-recursive uninstall-info-recursive \ +- uninstall-recursive ++ install-dvi-recursive install-exec-recursive \ ++ install-html-recursive install-info-recursive \ ++ install-pdf-recursive install-ps-recursive install-recursive \ ++ installcheck-recursive installdirs-recursive pdf-recursive \ ++ ps-recursive uninstall-recursive ++RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ ++ distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir dist dist-all distcheck + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) +@@ -66,16 +71,39 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCE + distdir = $(PACKAGE)-$(VERSION) + top_distdir = $(distdir) + am__remove_distdir = \ +- { test ! -d $(distdir) \ +- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ +- && rm -fr $(distdir); }; } ++ { test ! -d "$(distdir)" \ ++ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ ++ && rm -fr "$(distdir)"; }; } ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^$[^/]*$/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/$[^/]*$$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" + DIST_ARCHIVES = $(distdir).tar.gz + GZIP_ENV = --best + distuninstallcheck_listfiles = find . -type f -print + distcleancheck_listfiles = find . -type f -print + ACLOCAL = @ACLOCAL@ +-AMDEP_FALSE = @AMDEP_FALSE@ +-AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -94,48 +122,57 @@ CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ ++MKDIR_P = @MKDIR_P@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ ++OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ ++SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ +-ac_ct_AR = @ac_ct_AR@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ +-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -147,29 +184,43 @@ build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ ++builddir = @builddir@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ ++top_build_prefix = @top_build_prefix@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ + SUBDIRS = lib raidutil raideng ++ACLOCAL_AMFLAGS = -I m4 + all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +@@ -180,15 +231,15 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefi + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ +- cd $(srcdir) && $(AUTOMAKE) --gnu \ ++ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ ++ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -204,21 +255,22 @@ $(top_builddir)/config.status: $(top_src + $(SHELL) ./config.status --recheck + + $(top_srcdir)/configure: $(am__configure_deps) +- cd $(srcdir) && $(AUTOCONF) ++ $(am__cd) $(srcdir) && $(AUTOCONF) + $(ACLOCAL_M4): $(am__aclocal_m4_deps) +- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) ++ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) ++$(am__aclocal_m4_deps): + + config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ +- $(MAKE) stamp-h1; \ ++ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + + stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h + $(srcdir)/config.h.in: $(am__configure_deps) +- cd $(top_srcdir) && $(AUTOHEADER) ++ ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +@@ -234,8 +286,7 @@ clean-libtool: + -rm -rf .libs _libs + + distclean-libtool: +- -rm -f libtool +-uninstall-info-am: ++ -rm -f libtool config.lt + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -244,7 +295,13 @@ uninstall-info-am: + # (which will cause the Makefiles to be regenerated when you run `make'); + # (2) otherwise, pass the desired values on the `make' command line. + $(RECURSIVE_TARGETS): +- @set fnord $$MAKEFLAGS; amf=$$2; \ ++ @fail= failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ +@@ -255,16 +312,21 @@ $(RECURSIVE_TARGETS): + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-mostlyclean-recursive clean-recursive distclean-recursive \ +-maintainer-clean-recursive: +- @set fnord $$MAKEFLAGS; amf=$$2; \ ++$(RECURSIVE_CLEAN_TARGETS): ++ @fail= failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ +@@ -284,16 +346,16 @@ maintainer-clean-recursive: + else \ + local_target="$$target"; \ + fi; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -301,14 +363,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -320,93 +382,114 @@ TAGS: tags-recursive $(HEADERS) $(SOURCE + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ +- here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) + $(am__remove_distdir) +- mkdir $(distdir) +- $(mkdir_p) $(distdir)/distribution +- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ +- list='$(DISTFILES)'; for file in $$list; do \ +- case $$file in \ +- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ +- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ +- esac; \ ++ test -d "$(distdir)" || mkdir "$(distdir)" ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ +- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ +- dir="/$$dir"; \ +- $(mkdir_p) "$(distdir)$$dir"; \ +- else \ +- dir=''; \ +- fi; \ + if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(mkdir_p) "$(distdir)/$$subdir" \ ++ || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ +- distdir=`$(am__cd) $(distdir) && pwd`; \ +- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ +- (cd $$subdir && \ ++ fi; \ ++ done ++ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ if test "$$subdir" = .; then :; else \ ++ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ ++ $(am__relativize); \ ++ new_distdir=$$reldir; \ ++ dir1=$$subdir; dir2="$(top_distdir)"; \ ++ $(am__relativize); \ ++ new_top_distdir=$$reldir; \ ++ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ ++ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ++ ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$top_distdir" \ +- distdir="$$distdir/$$subdir" \ ++ top_distdir="$$new_top_distdir" \ ++ distdir="$$new_distdir" \ ++ am__remove_distdir=: \ ++ am__skip_length_check=: \ ++ am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done +- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ++ -test -n "$(am__skip_mode_fix)" \ ++ || find "$(distdir)" -type d ! -perm -755 \ ++ -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ +- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ +- || chmod -R a+r $(distdir) ++ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ ++ || chmod -R a+r "$(distdir)" + dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) +@@ -415,6 +498,14 @@ dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + ++dist-lzma: distdir ++ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma ++ $(am__remove_distdir) + -+# _LT_WITH_PIC([MODE]) -+# -------------------- -+# implement the --with-pic flag, and support the `pic-only' and `no-pic' -+# LT_INIT options. -+# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -+m4_define([_LT_WITH_PIC], -+[AC_ARG_WITH([pic], -+ [AS_HELP_STRING([--with-pic], -+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], -+ [pic_mode="$withval"], -+ [pic_mode=default]) ++dist-xz: distdir ++ tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz ++ $(am__remove_distdir) + -+test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) +@@ -438,13 +529,17 @@ dist dist-all: distdir + distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ +- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ ++ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ +- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ ++ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ ++ *.tar.lzma*) \ ++ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ ++ *.tar.xz*) \ ++ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ +- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ ++ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac +@@ -452,9 +547,11 @@ distcheck: dist + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) ++ test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ +- && cd $(distdir)/_build \ ++ && am__cwd=`pwd` \ ++ && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ +@@ -476,13 +573,15 @@ distcheck: dist + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ +- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck ++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ ++ && cd "$$am__cwd" \ ++ || exit 1 + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ +- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' ++ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' + distuninstallcheck: +- @cd $(distuninstallcheck_dir) \ ++ @$(am__cd) '$(distuninstallcheck_dir)' \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ +@@ -524,6 +623,7 @@ clean-generic: + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -544,18 +644,38 @@ dvi-am: + + html: html-recursive + ++html-am: + -+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl -+])# _LT_WITH_PIC + info: info-recursive + + info-am: + + install-data-am: + ++install-dvi: install-dvi-recursive + -+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) -+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) ++install-dvi-am: + -+# Old name: -+AU_DEFUN([AC_LIBTOOL_PICMODE], -+[_LT_SET_OPTION([LT_INIT], [pic-only]) -+AC_DIAGNOSE([obsolete], -+[$0: Remove this warning and the call to _LT_SET_OPTION when you -+put the `pic-only' option into LT_INIT's first parameter.]) -+]) + install-exec-am: + ++install-html: install-html-recursive + -+dnl aclocal-1.4 backwards compatibility: -+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ++install-html-am: + -+## ----------------- ## -+## LTDL_INIT Options ## -+## ----------------- ## + install-info: install-info-recursive + ++install-info-am: + -+m4_define([_LTDL_MODE], []) -+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], -+ [m4_define([_LTDL_MODE], [nonrecursive])]) -+LT_OPTION_DEFINE([LTDL_INIT], [recursive], -+ [m4_define([_LTDL_MODE], [recursive])]) -+LT_OPTION_DEFINE([LTDL_INIT], [subproject], -+ [m4_define([_LTDL_MODE], [subproject])]) + install-man: + ++install-pdf: install-pdf-recursive + -+m4_define([_LTDL_TYPE], []) -+LT_OPTION_DEFINE([LTDL_INIT], [installable], -+ [m4_define([_LTDL_TYPE], [installable])]) -+LT_OPTION_DEFINE([LTDL_INIT], [convenience], -+ [m4_define([_LTDL_TYPE], [convenience])]) ---- /dev/null -+++ raidutils-0.0.6/m4/ltversion.m4 -@@ -0,0 +1,23 @@ -+# ltversion.m4 -- version numbers -*- Autoconf -*- -+# -+# Copyright (C) 2004 Free Software Foundation, Inc. -+# Written by Scott James Remnant, 2004 -+# -+# This file is free software; the Free Software Foundation gives -+# unlimited permission to copy and/or distribute it, with or without -+# modifications, as long as this notice is preserved. ++install-pdf-am: + -+# Generated from ltversion.in. ++install-ps: install-ps-recursive + -+# serial 3017 ltversion.m4 -+# This file is part of GNU Libtool ++install-ps-am: + -+m4_define([LT_PACKAGE_VERSION], [2.2.6b]) -+m4_define([LT_PACKAGE_REVISION], [1.3017]) + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -576,24 +696,27 @@ ps: ps-recursive + + ps-am: + +-uninstall-am: uninstall-info-am ++uninstall-am: + +-uninstall-info: uninstall-info-recursive ++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ ++ ctags-recursive install-am install-strip tags-recursive + +-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ +- check-am clean clean-generic clean-libtool clean-recursive \ +- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ +- dist-shar dist-tarZ dist-zip distcheck distclean \ +- distclean-generic distclean-hdr distclean-libtool \ +- distclean-recursive distclean-tags distcleancheck distdir \ ++.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ ++ all all-am am--refresh check check-am clean clean-generic \ ++ clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ ++ dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ ++ distcheck distclean distclean-generic distclean-hdr \ ++ distclean-libtool distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ +- install install-am install-data install-data-am install-exec \ +- install-exec-am install-info install-info-am install-man \ ++ install install-am install-data install-data-am install-dvi \ ++ install-dvi-am install-exec install-exec-am install-html \ ++ install-html-am install-info install-info-am install-man \ ++ install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ +- maintainer-clean-recursive mostlyclean mostlyclean-generic \ +- mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ +- tags tags-recursive uninstall uninstall-am uninstall-info-am ++ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ++ ps ps-am tags tags-recursive uninstall uninstall-am + -+AC_DEFUN([LTVERSION_VERSION], -+[macro_version='2.2.6b' -+macro_revision='1.3017' -+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) -+_LT_DECL(, macro_revision, 0) -+]) + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +--- raidutils-0.0.6.orig/raidutil/setrate.hpp ++++ raidutils-0.0.6/raidutil/setrate.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 2 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +@@ -59,8 +62,8 @@ class SetRate: public Command + public: + + // Set the (global) rebuild rate +- SetRate::SetRate(int rate, SCSI_Addr_List *objs); +- SetRate::SetRate(const SetRate &right); ++ SetRate(int rate, SCSI_Addr_List *objs); ++ SetRate(const SetRate &right); + virtual ~SetRate(); + + Dpt_Error execute(String_List **output); +--- raidutils-0.0.6.orig/raidutil/listdev.cpp ++++ raidutils-0.0.6/raidutil/listdev.cpp +@@ -38,9 +38,12 @@ + * Description: This command lists all + * Version Control: + * +-* $Revision: 97 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:13 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +@@ -2336,7 +2339,7 @@ Command::Dpt_Error List_Device::List_Tag + if (more_Devs_Left) + { + char tempBuf[5]; +- sprintf (tempBuf, "%d", this_Objs_Tag); ++ sprintf (tempBuf, "%d", (int)this_Objs_Tag); + output.add_Item (tempBuf); + + err |= List_This_Device (output, this_Objs_Tag, devs_Type); +--- raidutils-0.0.6.orig/raidutil/creatrad.cpp ++++ raidutils-0.0.6/raidutil/creatrad.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 45 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:12 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/rustring.h ++++ raidutils-0.0.6/raidutil/rustring.h +@@ -41,9 +41,12 @@ + * Description: English Language Strings for DptUtil + * Version Control: + * +-* $Revision: 79 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:15 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/rscstrs.h ++++ raidutils-0.0.6/raidutil/rscstrs.h +@@ -332,7 +332,7 @@ char * EventStrings[] = + // STR_STATUS = 160, + // STR_RAID_INFO = 161, + // STR_SCSI_INFO = 162, +- "Removeable", // STR_REMOVABLE ++ "Removable", // STR_REMOVABLE + // STR_CAPABILITIES = 164, + // STR_REL_ADDR = 165, + "wide", // STR_WIDE +@@ -607,7 +607,7 @@ char * EventStrings[] = + "Error: fwd not initialized",//STR_ERR_FWD_NOT_INITIALIZED + "Error: fwd blk mismatch", //STR_ERR_FWD_BLK_MISMATCH + "Error: fwd blk overflow", //STR_ERR_FWD_BLK_OVERFLOW +- "Error: rsv removeable", //STR_ERR_RSV_REMOVEABLE ++ "Error: rsv removable", //STR_ERR_RSV_REMOVABLE + "Error: rsv not dasd", //STR_ERR_RSV_NOT_DASD + "Error: rsv non zero", //STR_ERR_RSV_NON_ZERO + "Error: rsv hba unable",//STR_ERR_RSV_HBA_UNABLE +--- raidutils-0.0.6.orig/raidutil/strlist.cpp ++++ raidutils-0.0.6/raidutil/strlist.cpp +@@ -39,9 +39,12 @@ + solution in coding C++ without STL. + * Version Control: + * +-* $Revision: 7 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ --- raidutils-0.0.6.orig/raidutil/deletrad.hpp +++ raidutils-0.0.6/raidutil/deletrad.hpp @@ -41,9 +41,12 @@ * Description: * Version Control: * --* $Revision: 6 $ +-* $Revision: 6 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/forcest.hpp ++++ raidutils-0.0.6/raidutil/forcest.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 2 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +@@ -65,7 +68,7 @@ enum ForceStateOptions { Optimal, Fail, + class ForceState:public Command + { + public: +- ForceState::ForceState(SCSI_Addr_List *deviceList, ForceStateOptions cmd); ++ ForceState(SCSI_Addr_List *deviceList, ForceStateOptions cmd); + ForceState(const ForceState &new_ForceState); + virtual ~ForceState(); + +--- raidutils-0.0.6.orig/raidutil/usage.hpp ++++ raidutils-0.0.6/raidutil/usage.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 3 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:11 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/config.hpp ++++ raidutils-0.0.6/raidutil/config.hpp +@@ -41,9 +41,12 @@ + * Description: This command loads and saves controller configuration + * Version Control: + * +-* $Revision: 1 $ +* $Revision$ * $NoKeywords: $ -* $Log: $ @@ -77537,2810 +68960,2744 @@ *****************************************************************************/ /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/Makefile.in -+++ raidutils-0.0.6/raidutil/Makefile.in -@@ -1,8 +1,9 @@ --# Makefile.in generated by automake 1.9.2 from Makefile.am. -+# Makefile.in generated by automake 1.11.1 from Makefile.am. - # @configure_input@ +--- raidutils-0.0.6.orig/raidutil/scsilist.cpp ++++ raidutils-0.0.6/raidutil/scsilist.cpp +@@ -39,9 +39,12 @@ + solution in coding C++ without STL. + * Version Control: + * +-* $Revision: 8 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, --# 2003, 2004 Free Software Foundation, Inc. -+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -+# Inc. - # This Makefile.in is free software; the Free Software Foundation - # gives unlimited permission to copy and/or distribute it, - # with or without modifications, as long as this notice is preserved. -@@ -14,17 +15,12 @@ + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/command.cpp ++++ raidutils-0.0.6/raidutil/command.cpp +@@ -41,9 +41,12 @@ + gathered by the derived object. + * Version Control: + * +-* $Revision: 45 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - @SET_MAKE@ + /*** INCLUDES ***/ +@@ -600,8 +603,8 @@ Command::Dpt_Error::operator char *() + constant_Str = EventStrings[STR_ERR_FWD_BLK_OVERFLOW]; + break; --SOURCES = $(raidutil_SOURCES) +- case DPT_ERR_RSV_REMOVEABLE: +- constant_Str = EventStrings[STR_ERR_RSV_REMOVEABLE]; ++ case DPT_ERR_RSV_REMOVABLE: ++ constant_Str = EventStrings[STR_ERR_RSV_REMOVABLE]; + break; + + case DPT_ERR_RSV_NOT_DASD: +@@ -2237,13 +2240,6 @@ void Command::MakeArrayOptimal(DPT_TAG_T + } + + +-#ifdef sparc +-# define VOLATILE volatile +-#else +-# define VOLATILE +-#endif - --srcdir = @srcdir@ --top_srcdir = @top_srcdir@ - VPATH = @srcdir@ - pkgdatadir = $(datadir)/@PACKAGE@ --pkglibdir = $(libdir)/@PACKAGE@ - pkgincludedir = $(includedir)/@PACKAGE@ --top_builddir = .. -+pkglibdir = $(libdir)/@PACKAGE@ -+pkglibexecdir = $(libexecdir)/@PACKAGE@ - am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd --INSTALL = @INSTALL@ - install_sh_DATA = $(install_sh) -c -m 644 - install_sh_PROGRAM = $(install_sh) -c - install_sh_SCRIPT = $(install_sh) -c -@@ -38,7 +34,7 @@ PRE_UNINSTALL = : - POST_UNINSTALL = : - build_triplet = @build@ - host_triplet = @host@ --bin_PROGRAMS = raidutil$(EXEEXT) -+sbin_PROGRAMS = raidutil$(EXEEXT) - subdir = raidutil - DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in - ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -@@ -48,9 +44,9 @@ am__configure_deps = $(am__aclocal_m4_de - mkinstalldirs = $(install_sh) -d - CONFIG_HEADER = $(top_builddir)/config.h - CONFIG_CLEAN_FILES = --am__installdirs = "$(DESTDIR)$(bindir)" --binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) --PROGRAMS = $(bin_PROGRAMS) -+CONFIG_CLEAN_VPATH_FILES = -+am__installdirs = "$(DESTDIR)$(sbindir)" -+PROGRAMS = $(sbin_PROGRAMS) - am_raidutil_OBJECTS = raidutil-alarm.$(OBJEXT) \ - raidutil-bufiolsb.$(OBJEXT) raidutil-cmdlist.$(OBJEXT) \ - raidutil-command.$(OBJEXT) raidutil-config.$(OBJEXT) \ -@@ -76,33 +72,34 @@ am_raidutil_OBJECTS = raidutil-alarm.$(O - raidutil-swap_em.$(OBJEXT) - raidutil_OBJECTS = $(am_raidutil_OBJECTS) - raidutil_DEPENDENCIES = ../lib/libraidutil.la --DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) -+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) - depcomp = $(SHELL) $(top_srcdir)/depcomp - am__depfiles_maybe = depfiles -+am__mv = mv -f - COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) --LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ -- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ -- $(AM_CFLAGS) $(CFLAGS) -+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ -+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ -+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) - CCLD = $(CC) --LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ -- $(AM_LDFLAGS) $(LDFLAGS) -o $@ -+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ -+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ -+ $(LDFLAGS) -o $@ - CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) --LTCXXCOMPILE = $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) \ -- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ -- $(AM_CXXFLAGS) $(CXXFLAGS) -+LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ -+ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ -+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) - CXXLD = $(CXX) --CXXLINK = $(LIBTOOL) --mode=link --tag=CXX $(CXXLD) $(AM_CXXFLAGS) \ -- $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -+CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ -+ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ -+ $(LDFLAGS) -o $@ - SOURCES = $(raidutil_SOURCES) - DIST_SOURCES = $(raidutil_SOURCES) - ETAGS = etags - CTAGS = ctags - DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - ACLOCAL = @ACLOCAL@ --AMDEP_FALSE = @AMDEP_FALSE@ --AMDEP_TRUE = @AMDEP_TRUE@ - AMTAR = @AMTAR@ - AR = @AR@ - AUTOCONF = @AUTOCONF@ -@@ -121,48 +118,57 @@ CXXFLAGS = @CXXFLAGS@ - CYGPATH_W = @CYGPATH_W@ - DEFS = @DEFS@ - DEPDIR = @DEPDIR@ --ECHO = @ECHO@ -+DSYMUTIL = @DSYMUTIL@ -+DUMPBIN = @DUMPBIN@ - ECHO_C = @ECHO_C@ - ECHO_N = @ECHO_N@ - ECHO_T = @ECHO_T@ - EGREP = @EGREP@ - EXEEXT = @EXEEXT@ --F77 = @F77@ --FFLAGS = @FFLAGS@ -+FGREP = @FGREP@ -+GREP = @GREP@ -+INSTALL = @INSTALL@ - INSTALL_DATA = @INSTALL_DATA@ - INSTALL_PROGRAM = @INSTALL_PROGRAM@ - INSTALL_SCRIPT = @INSTALL_SCRIPT@ - INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -+LD = @LD@ - LDFLAGS = @LDFLAGS@ - LIBOBJS = @LIBOBJS@ - LIBS = @LIBS@ - LIBTOOL = @LIBTOOL@ -+LIPO = @LIPO@ - LN_S = @LN_S@ - LTLIBOBJS = @LTLIBOBJS@ - MAKEINFO = @MAKEINFO@ -+MKDIR_P = @MKDIR_P@ -+NM = @NM@ -+NMEDIT = @NMEDIT@ -+OBJDUMP = @OBJDUMP@ - OBJEXT = @OBJEXT@ -+OTOOL = @OTOOL@ -+OTOOL64 = @OTOOL64@ - PACKAGE = @PACKAGE@ - PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ - PACKAGE_NAME = @PACKAGE_NAME@ - PACKAGE_STRING = @PACKAGE_STRING@ - PACKAGE_TARNAME = @PACKAGE_TARNAME@ -+PACKAGE_URL = @PACKAGE_URL@ - PACKAGE_VERSION = @PACKAGE_VERSION@ - PATH_SEPARATOR = @PATH_SEPARATOR@ - RANLIB = @RANLIB@ -+SED = @SED@ - SET_MAKE = @SET_MAKE@ - SHELL = @SHELL@ - STRIP = @STRIP@ - VERSION = @VERSION@ --ac_ct_AR = @ac_ct_AR@ -+abs_builddir = @abs_builddir@ -+abs_srcdir = @abs_srcdir@ -+abs_top_builddir = @abs_top_builddir@ -+abs_top_srcdir = @abs_top_srcdir@ - ac_ct_CC = @ac_ct_CC@ - ac_ct_CXX = @ac_ct_CXX@ --ac_ct_F77 = @ac_ct_F77@ --ac_ct_RANLIB = @ac_ct_RANLIB@ --ac_ct_STRIP = @ac_ct_STRIP@ --am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ --am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ --am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ --am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ -+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ - am__include = @am__include@ - am__leading_dot = @am__leading_dot@ - am__quote = @am__quote@ -@@ -174,28 +180,41 @@ build_alias = @build_alias@ - build_cpu = @build_cpu@ - build_os = @build_os@ - build_vendor = @build_vendor@ -+builddir = @builddir@ - datadir = @datadir@ -+datarootdir = @datarootdir@ -+docdir = @docdir@ -+dvidir = @dvidir@ - exec_prefix = @exec_prefix@ - host = @host@ - host_alias = @host_alias@ - host_cpu = @host_cpu@ - host_os = @host_os@ - host_vendor = @host_vendor@ -+htmldir = @htmldir@ - includedir = @includedir@ - infodir = @infodir@ - install_sh = @install_sh@ - libdir = @libdir@ - libexecdir = @libexecdir@ -+localedir = @localedir@ - localstatedir = @localstatedir@ -+lt_ECHO = @lt_ECHO@ - mandir = @mandir@ - mkdir_p = @mkdir_p@ - oldincludedir = @oldincludedir@ -+pdfdir = @pdfdir@ - prefix = @prefix@ - program_transform_name = @program_transform_name@ -+psdir = @psdir@ - sbindir = @sbindir@ - sharedstatedir = @sharedstatedir@ -+srcdir = @srcdir@ - sysconfdir = @sysconfdir@ - target_alias = @target_alias@ -+top_build_prefix = @top_build_prefix@ -+top_builddir = @top_builddir@ -+top_srcdir = @top_srcdir@ - raidutil_SOURCES = alarm.cpp bufiolsb.c cmdlist.cpp command.cpp config.cpp creatrad.cpp deletrad.cpp dynsize.cpp engiface.cpp eventlog.cpp expand.cpp flash.cpp flashmem.cpp forcest.cpp id_list.cpp intlist.cpp listdev.cpp lzssdon.cpp lzstrbuf.cpp modnvram.cpp namarray.cpp nvrambit.cpp parsargv.cpp parser.cpp parserr.cpp raidutil.cpp rawdata.cpp rdutlosd.cpp rmwflash.cpp rstnvram.cpp scsilist.cpp setcache.cpp setrate.cpp setspeed.cpp showinq.cpp status.cpp strlist.cpp taskctrl.cpp uartdmp.cpp usage.cpp zap.cpp setscfg.cpp segment.cpp swap_em.c - raidutil_CPPFLAGS = -O3 -DMESSAGES -D_DPT_ACTIVE_ALIGNMENT -Dtrue=1 -Dfalse=0 -DHORIZONTAL -DNEW_RSC_MGR -DNEW_RSC_HDR -D_DPT_FLASH -I../include - raidutil_LDADD = ../lib/libraidutil.la -@@ -207,14 +226,14 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefi - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ -- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ -- && exit 0; \ -+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ -+ && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ -- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu raidutil/Makefile'; \ -- cd $(top_srcdir) && \ -- $(AUTOMAKE) --gnu raidutil/Makefile -+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu raidutil/Makefile'; \ -+ $(am__cd) $(top_srcdir) && \ -+ $(AUTOMAKE) --gnu raidutil/Makefile - .PRECIOUS: Makefile - Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ -@@ -232,37 +251,53 @@ $(top_srcdir)/configure: $(am__configur - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - $(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh --install-binPROGRAMS: $(bin_PROGRAMS) -+$(am__aclocal_m4_deps): -+install-sbinPROGRAMS: $(sbin_PROGRAMS) - @$(NORMAL_INSTALL) -- test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" -- @list='$(bin_PROGRAMS)'; for p in $$list; do \ -- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ -- if test -f $$p \ -- || test -f $$p1 \ -- ; then \ -- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ -- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ -- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ -- else :; fi; \ -- done -+ test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" -+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ -+ for p in $$list; do echo "$$p $$p"; done | \ -+ sed 's/$(EXEEXT)$$//' | \ -+ while read p p1; do if test -f $$p || test -f $$p1; \ -+ then echo "$$p"; echo "$$p"; else :; fi; \ -+ done | \ -+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ -+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ -+ sed 'N;N;N;s,\n, ,g' | \ -+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ -+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ -+ if ($$2 == $$4) files[d] = files[d] " " $$1; \ -+ else { print "f", $$3 "/" $$4, $$1; } } \ -+ END { for (d in files) print "f", d, files[d] }' | \ -+ while read type dir files; do \ -+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ -+ test -z "$$files" || { \ -+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ -+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ -+ } \ -+ ; done +-extern "C" { VOLATILE void exit (int);} + + void Command::Init_Engine(int scanHbasOnly) + { +--- raidutils-0.0.6.orig/raidutil/parser.hpp ++++ raidutils-0.0.6/raidutil/parser.hpp +@@ -43,9 +43,12 @@ + This array can then be fetched and executed. + * Version Control: + * +-* $Revision: 9 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/showinq.cpp ++++ raidutils-0.0.6/raidutil/showinq.cpp +@@ -39,9 +39,12 @@ + passed in. + * Version Control: + * +-* $Revision: 13 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +@@ -215,7 +218,7 @@ SHOW_PHYSICAL: + output.add_Item( "\n" ); + output.add_Item(EventStrings[STR_REMOVABLE]); + output.add_Item( ":" ); +- output.add_Item( ( engine->devInfo_P->flags & FLG_DEV_REMOVEABLE)? EventStrings[STR_YES]:EventStrings[STR_NO]); ++ output.add_Item( ( engine->devInfo_P->flags & FLG_DEV_REMOVABLE)? EventStrings[STR_YES]:EventStrings[STR_NO]); + output.add_Item( "\n" ); + break; + +@@ -317,7 +320,7 @@ SHOW_PHYSICAL: + output.add_Item( ":" ); + output.add_Item( obj_Type_Str ); + output.add_Item( "\n" ); +- // output.add_Item( ( engine->devInfo_P->flags & FLG_DEV_REMOVEABLE )? STR_YES:STR_NO ); ++ // output.add_Item( ( engine->devInfo_P->flags & FLG_DEV_REMOVABLE )? STR_YES:STR_NO ); + output.add_Item( "\n" ); + } + break; +--- raidutils-0.0.6.orig/raidutil/rmwflash.cpp ++++ raidutils-0.0.6/raidutil/rmwflash.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 4 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/segment.hpp ++++ raidutils-0.0.6/raidutil/segment.hpp +@@ -51,7 +51,7 @@ class arraySegment:public Command + { + + public: +- arraySegment::arraySegment(SCSI_Address raidToSeg, uLONG segSize[8], uLONG segOffset[8], bool showSeg); ++ arraySegment(SCSI_Address raidToSeg, uLONG segSize[8], uLONG segOffset[8], bool showSeg); + arraySegment(const arraySegment &new_arraySegment); + virtual ~arraySegment(); + +--- raidutils-0.0.6.orig/raidutil/namarray.cpp ++++ raidutils-0.0.6/raidutil/namarray.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 1 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/setspeed.hpp ++++ raidutils-0.0.6/raidutil/setspeed.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 2 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/flash.hpp ++++ raidutils-0.0.6/raidutil/flash.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 18 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-05-05 12:43:39 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/setscfg.cpp ++++ raidutils-0.0.6/raidutil/setscfg.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 1 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +@@ -95,4 +98,4 @@ Command &setscfg::Clone() const + ENTER("Command &setscfg::Clone() const"); + EXIT(); + return(*new setscfg(*this)); +-} +\ No newline at end of file ++} +--- raidutils-0.0.6.orig/raidutil/dynsize.h ++++ raidutils-0.0.6/raidutil/dynsize.h +@@ -42,9 +42,12 @@ + * class. + * Version Control: + * +-* $Revision: 2 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-05-05 12:41:44 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ --uninstall-binPROGRAMS: -+uninstall-sbinPROGRAMS: - @$(NORMAL_UNINSTALL) -- @list='$(bin_PROGRAMS)'; for p in $$list; do \ -- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ -- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ -- rm -f "$(DESTDIR)$(bindir)/$$f"; \ -- done -- --clean-binPROGRAMS: -- @list='$(bin_PROGRAMS)'; for p in $$list; do \ -- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ -- echo " rm -f $$p $$f"; \ -- rm -f $$p $$f ; \ -- done -+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ -+ files=`for p in $$list; do echo "$$p"; done | \ -+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -+ -e 's/$$/$(EXEEXT)/' `; \ -+ test -n "$$list" || exit 0; \ -+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ -+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files -+ -+clean-sbinPROGRAMS: -+ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ -+ echo " rm -f" $$list; \ -+ rm -f $$list || exit $$?; \ -+ test -n "$(EXEEXT)" || exit 0; \ -+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ -+ echo " rm -f" $$list; \ -+ rm -f $$list - raidutil$(EXEEXT): $(raidutil_OBJECTS) $(raidutil_DEPENDENCIES) - @rm -f raidutil$(EXEEXT) -- $(CXXLINK) $(raidutil_LDFLAGS) $(raidutil_OBJECTS) $(raidutil_LDADD) $(LIBS) -+ $(CXXLINK) $(raidutil_OBJECTS) $(raidutil_LDADD) $(LIBS) + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/lzstrbuf.h ++++ raidutils-0.0.6/raidutil/lzstrbuf.h +@@ -41,9 +41,12 @@ + * Description: Contains the declaration of the LzInStreamBuf class. + * Version Control: + * +-* $Revision: 2 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-05-05 12:47:27 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - mostlyclean-compile: - -rm -f *.$(OBJEXT) -@@ -316,659 +351,659 @@ distclean-compile: - @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/raidutil-zap.Po@am__quote@ + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/setrate.cpp ++++ raidutils-0.0.6/raidutil/setrate.cpp +@@ -38,9 +38,12 @@ + * Description: This command sets the rebuild rate. + * Version Control: + * +-* $Revision: 16 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - .c.o: --@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCC_FALSE@ $(COMPILE) -c $< + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/alarm.cpp ++++ raidutils-0.0.6/raidutil/alarm.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 11 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:15 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - .c.obj: --@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/modnvram.cpp ++++ raidutils-0.0.6/raidutil/modnvram.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 6 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - .c.lo: --@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/Makefile.am ++++ raidutils-0.0.6/raidutil/Makefile.am +@@ -1,4 +1,4 @@ +-bin_PROGRAMS=raidutil ++sbin_PROGRAMS=raidutil + raidutil_SOURCES=alarm.cpp bufiolsb.c cmdlist.cpp command.cpp config.cpp creatrad.cpp deletrad.cpp dynsize.cpp engiface.cpp eventlog.cpp expand.cpp flash.cpp flashmem.cpp forcest.cpp id_list.cpp intlist.cpp listdev.cpp lzssdon.cpp lzstrbuf.cpp modnvram.cpp namarray.cpp nvrambit.cpp parsargv.cpp parser.cpp parserr.cpp raidutil.cpp rawdata.cpp rdutlosd.cpp rmwflash.cpp rstnvram.cpp scsilist.cpp setcache.cpp setrate.cpp setspeed.cpp showinq.cpp status.cpp strlist.cpp taskctrl.cpp uartdmp.cpp usage.cpp zap.cpp setscfg.cpp segment.cpp swap_em.c + raidutil_CPPFLAGS=-O3 -DMESSAGES -D_DPT_ACTIVE_ALIGNMENT -Dtrue=1 -Dfalse=0 -DHORIZONTAL -DNEW_RSC_MGR -DNEW_RSC_HDR -D_DPT_FLASH -I../include + raidutil_LDADD=../lib/libraidutil.la +--- raidutils-0.0.6.orig/raidutil/expand.hpp ++++ raidutils-0.0.6/raidutil/expand.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 1 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ - raidutil-bufiolsb.o: bufiolsb.c --@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-bufiolsb.o -MD -MP -MF "$(DEPDIR)/raidutil-bufiolsb.Tpo" -c -o raidutil-bufiolsb.o `test -f 'bufiolsb.c' || echo '$(srcdir)/'`bufiolsb.c; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/raidutil-bufiolsb.Tpo" "$(DEPDIR)/raidutil-bufiolsb.Po"; else rm -f "$(DEPDIR)/raidutil-bufiolsb.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-bufiolsb.o -MD -MP -MF $(DEPDIR)/raidutil-bufiolsb.Tpo -c -o raidutil-bufiolsb.o `test -f 'bufiolsb.c' || echo '$(srcdir)/'`bufiolsb.c -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/raidutil-bufiolsb.Tpo $(DEPDIR)/raidutil-bufiolsb.Po - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bufiolsb.c' object='raidutil-bufiolsb.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o raidutil-bufiolsb.o `test -f 'bufiolsb.c' || echo '$(srcdir)/'`bufiolsb.c + /*** INCLUDES ***/ +@@ -55,7 +58,7 @@ + class Expand:public Command + { + public: +- Expand::Expand (SCSI_Address raid, SCSI_Addr_List *list); ++ Expand (SCSI_Address raid, SCSI_Addr_List *list); + Expand (const Expand &new_Expand); + virtual ~Expand(); + Expand &operator = (Expand &right); +--- raidutils-0.0.6.orig/raidutil/uartdmp.hpp ++++ raidutils-0.0.6/raidutil/uartdmp.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 3 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ - raidutil-bufiolsb.obj: bufiolsb.c --@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-bufiolsb.obj -MD -MP -MF "$(DEPDIR)/raidutil-bufiolsb.Tpo" -c -o raidutil-bufiolsb.obj `if test -f 'bufiolsb.c'; then $(CYGPATH_W) 'bufiolsb.c'; else $(CYGPATH_W) '$(srcdir)/bufiolsb.c'; fi`; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/raidutil-bufiolsb.Tpo" "$(DEPDIR)/raidutil-bufiolsb.Po"; else rm -f "$(DEPDIR)/raidutil-bufiolsb.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-bufiolsb.obj -MD -MP -MF $(DEPDIR)/raidutil-bufiolsb.Tpo -c -o raidutil-bufiolsb.obj `if test -f 'bufiolsb.c'; then $(CYGPATH_W) 'bufiolsb.c'; else $(CYGPATH_W) '$(srcdir)/bufiolsb.c'; fi` -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/raidutil-bufiolsb.Tpo $(DEPDIR)/raidutil-bufiolsb.Po - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bufiolsb.c' object='raidutil-bufiolsb.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o raidutil-bufiolsb.obj `if test -f 'bufiolsb.c'; then $(CYGPATH_W) 'bufiolsb.c'; else $(CYGPATH_W) '$(srcdir)/bufiolsb.c'; fi` + /*** INCLUDES ***/ +@@ -59,7 +62,7 @@ class UartDmp:public Command + { - raidutil-swap_em.o: swap_em.c --@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-swap_em.o -MD -MP -MF "$(DEPDIR)/raidutil-swap_em.Tpo" -c -o raidutil-swap_em.o `test -f 'swap_em.c' || echo '$(srcdir)/'`swap_em.c; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/raidutil-swap_em.Tpo" "$(DEPDIR)/raidutil-swap_em.Po"; else rm -f "$(DEPDIR)/raidutil-swap_em.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-swap_em.o -MD -MP -MF $(DEPDIR)/raidutil-swap_em.Tpo -c -o raidutil-swap_em.o `test -f 'swap_em.c' || echo '$(srcdir)/'`swap_em.c -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/raidutil-swap_em.Tpo $(DEPDIR)/raidutil-swap_em.Po - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='swap_em.c' object='raidutil-swap_em.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o raidutil-swap_em.o `test -f 'swap_em.c' || echo '$(srcdir)/'`swap_em.c + public: +- UartDmp::UartDmp(int hbaNo, char *fileName); ++ UartDmp(int hbaNo, char *fileName); + UartDmp(const UartDmp &new_UartDmp); + virtual ~UartDmp(); - raidutil-swap_em.obj: swap_em.c --@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-swap_em.obj -MD -MP -MF "$(DEPDIR)/raidutil-swap_em.Tpo" -c -o raidutil-swap_em.obj `if test -f 'swap_em.c'; then $(CYGPATH_W) 'swap_em.c'; else $(CYGPATH_W) '$(srcdir)/swap_em.c'; fi`; \ --@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/raidutil-swap_em.Tpo" "$(DEPDIR)/raidutil-swap_em.Po"; else rm -f "$(DEPDIR)/raidutil-swap_em.Tpo"; exit 1; fi -+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-swap_em.obj -MD -MP -MF $(DEPDIR)/raidutil-swap_em.Tpo -c -o raidutil-swap_em.obj `if test -f 'swap_em.c'; then $(CYGPATH_W) 'swap_em.c'; else $(CYGPATH_W) '$(srcdir)/swap_em.c'; fi` -+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/raidutil-swap_em.Tpo $(DEPDIR)/raidutil-swap_em.Po - @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='swap_em.c' object='raidutil-swap_em.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o raidutil-swap_em.obj `if test -f 'swap_em.c'; then $(CYGPATH_W) 'swap_em.c'; else $(CYGPATH_W) '$(srcdir)/swap_em.c'; fi` +--- raidutils-0.0.6.orig/raidutil/scsiaddr.hpp ++++ raidutils-0.0.6/raidutil/scsiaddr.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 5 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:12 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - .cpp.o: --@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/setcache.hpp ++++ raidutils-0.0.6/raidutil/setcache.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 1 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ - .cpp.obj: --@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + /*** INCLUDES ***/ +@@ -55,11 +58,11 @@ + class SetCache:public Command + { + public: +- SetCache::SetCache( +- SCSI_Addr_List *addresses, // a list of addresses +- int on, // Whether to enable or disable +- int rw // Read or write cacheing. +- ); // to delete raid tables on ++ SetCache( ++ SCSI_Addr_List *addresses, // a list of addresses ++ int on, // Whether to enable or disable ++ int rw // Read or write cacheing. ++ ); // to delete raid tables on + SetCache( const SetCache &new_SetCache ); + virtual ~SetCache(); + SetCache &operator = ( SetCache &right ); +--- raidutils-0.0.6.orig/raidutil/intlist.hpp ++++ raidutils-0.0.6/raidutil/intlist.hpp +@@ -41,9 +41,12 @@ + * Description: This file serves as a container class, holding a list of items. + * Version Control: + * +-* $Revision: 7 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - .cpp.lo: --@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/listdev.hpp ++++ raidutils-0.0.6/raidutil/listdev.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 23 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-alarm.o: alarm.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-alarm.o -MD -MP -MF "$(DEPDIR)/raidutil-alarm.Tpo" -c -o raidutil-alarm.o `test -f 'alarm.cpp' || echo '$(srcdir)/'`alarm.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-alarm.Tpo" "$(DEPDIR)/raidutil-alarm.Po"; else rm -f "$(DEPDIR)/raidutil-alarm.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-alarm.o -MD -MP -MF $(DEPDIR)/raidutil-alarm.Tpo -c -o raidutil-alarm.o `test -f 'alarm.cpp' || echo '$(srcdir)/'`alarm.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-alarm.Tpo $(DEPDIR)/raidutil-alarm.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='alarm.cpp' object='raidutil-alarm.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-alarm.o `test -f 'alarm.cpp' || echo '$(srcdir)/'`alarm.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/strlist.hpp ++++ raidutils-0.0.6/raidutil/strlist.hpp +@@ -42,9 +42,12 @@ + solution in coding C++ without STL. + * Version Control: + * +-* $Revision: 6 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:13 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-alarm.obj: alarm.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-alarm.obj -MD -MP -MF "$(DEPDIR)/raidutil-alarm.Tpo" -c -o raidutil-alarm.obj `if test -f 'alarm.cpp'; then $(CYGPATH_W) 'alarm.cpp'; else $(CYGPATH_W) '$(srcdir)/alarm.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-alarm.Tpo" "$(DEPDIR)/raidutil-alarm.Po"; else rm -f "$(DEPDIR)/raidutil-alarm.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-alarm.obj -MD -MP -MF $(DEPDIR)/raidutil-alarm.Tpo -c -o raidutil-alarm.obj `if test -f 'alarm.cpp'; then $(CYGPATH_W) 'alarm.cpp'; else $(CYGPATH_W) '$(srcdir)/alarm.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-alarm.Tpo $(DEPDIR)/raidutil-alarm.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='alarm.cpp' object='raidutil-alarm.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-alarm.obj `if test -f 'alarm.cpp'; then $(CYGPATH_W) 'alarm.cpp'; else $(CYGPATH_W) '$(srcdir)/alarm.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/nvrambit.hpp ++++ raidutils-0.0.6/raidutil/nvrambit.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 2 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:12 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-cmdlist.o: cmdlist.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-cmdlist.o -MD -MP -MF "$(DEPDIR)/raidutil-cmdlist.Tpo" -c -o raidutil-cmdlist.o `test -f 'cmdlist.cpp' || echo '$(srcdir)/'`cmdlist.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-cmdlist.Tpo" "$(DEPDIR)/raidutil-cmdlist.Po"; else rm -f "$(DEPDIR)/raidutil-cmdlist.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-cmdlist.o -MD -MP -MF $(DEPDIR)/raidutil-cmdlist.Tpo -c -o raidutil-cmdlist.o `test -f 'cmdlist.cpp' || echo '$(srcdir)/'`cmdlist.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-cmdlist.Tpo $(DEPDIR)/raidutil-cmdlist.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='cmdlist.cpp' object='raidutil-cmdlist.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-cmdlist.o `test -f 'cmdlist.cpp' || echo '$(srcdir)/'`cmdlist.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/taskctrl.hpp ++++ raidutils-0.0.6/raidutil/taskctrl.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 4 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ - raidutil-cmdlist.obj: cmdlist.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-cmdlist.obj -MD -MP -MF "$(DEPDIR)/raidutil-cmdlist.Tpo" -c -o raidutil-cmdlist.obj `if test -f 'cmdlist.cpp'; then $(CYGPATH_W) 'cmdlist.cpp'; else $(CYGPATH_W) '$(srcdir)/cmdlist.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-cmdlist.Tpo" "$(DEPDIR)/raidutil-cmdlist.Po"; else rm -f "$(DEPDIR)/raidutil-cmdlist.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-cmdlist.obj -MD -MP -MF $(DEPDIR)/raidutil-cmdlist.Tpo -c -o raidutil-cmdlist.obj `if test -f 'cmdlist.cpp'; then $(CYGPATH_W) 'cmdlist.cpp'; else $(CYGPATH_W) '$(srcdir)/cmdlist.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-cmdlist.Tpo $(DEPDIR)/raidutil-cmdlist.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='cmdlist.cpp' object='raidutil-cmdlist.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-cmdlist.obj `if test -f 'cmdlist.cpp'; then $(CYGPATH_W) 'cmdlist.cpp'; else $(CYGPATH_W) '$(srcdir)/cmdlist.cpp'; fi` + /*** INCLUDES ***/ +@@ -59,7 +62,7 @@ enum TaskCommandOptions { List, Build, R + class TaskControl:public Command + { + public: +- TaskControl::TaskControl(SCSI_Addr_List *deviceList, TaskCommandOptions cmd); ++ TaskControl(SCSI_Addr_List *deviceList, TaskCommandOptions cmd); + TaskControl(const TaskControl &new_TaskControl); + virtual ~TaskControl(); - raidutil-command.o: command.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-command.o -MD -MP -MF "$(DEPDIR)/raidutil-command.Tpo" -c -o raidutil-command.o `test -f 'command.cpp' || echo '$(srcdir)/'`command.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-command.Tpo" "$(DEPDIR)/raidutil-command.Po"; else rm -f "$(DEPDIR)/raidutil-command.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-command.o -MD -MP -MF $(DEPDIR)/raidutil-command.Tpo -c -o raidutil-command.o `test -f 'command.cpp' || echo '$(srcdir)/'`command.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-command.Tpo $(DEPDIR)/raidutil-command.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='command.cpp' object='raidutil-command.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-command.o `test -f 'command.cpp' || echo '$(srcdir)/'`command.cpp +--- raidutils-0.0.6.orig/raidutil/cmdlist.cpp ++++ raidutils-0.0.6/raidutil/cmdlist.cpp +@@ -39,9 +39,12 @@ + solution in coding C++ without STL. + * Version Control: + * +-* $Revision: 5 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-command.obj: command.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-command.obj -MD -MP -MF "$(DEPDIR)/raidutil-command.Tpo" -c -o raidutil-command.obj `if test -f 'command.cpp'; then $(CYGPATH_W) 'command.cpp'; else $(CYGPATH_W) '$(srcdir)/command.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-command.Tpo" "$(DEPDIR)/raidutil-command.Po"; else rm -f "$(DEPDIR)/raidutil-command.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-command.obj -MD -MP -MF $(DEPDIR)/raidutil-command.Tpo -c -o raidutil-command.obj `if test -f 'command.cpp'; then $(CYGPATH_W) 'command.cpp'; else $(CYGPATH_W) '$(srcdir)/command.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-command.Tpo $(DEPDIR)/raidutil-command.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='command.cpp' object='raidutil-command.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-command.obj `if test -f 'command.cpp'; then $(CYGPATH_W) 'command.cpp'; else $(CYGPATH_W) '$(srcdir)/command.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/zap.cpp ++++ raidutils-0.0.6/raidutil/zap.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 24 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-config.o: config.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-config.o -MD -MP -MF "$(DEPDIR)/raidutil-config.Tpo" -c -o raidutil-config.o `test -f 'config.cpp' || echo '$(srcdir)/'`config.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-config.Tpo" "$(DEPDIR)/raidutil-config.Po"; else rm -f "$(DEPDIR)/raidutil-config.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-config.o -MD -MP -MF $(DEPDIR)/raidutil-config.Tpo -c -o raidutil-config.o `test -f 'config.cpp' || echo '$(srcdir)/'`config.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-config.Tpo $(DEPDIR)/raidutil-config.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='config.cpp' object='raidutil-config.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-config.o `test -f 'config.cpp' || echo '$(srcdir)/'`config.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/parserr.hpp ++++ raidutils-0.0.6/raidutil/parserr.hpp +@@ -43,9 +43,12 @@ + not previous commnads that parsed right (I think). + * Version Control: + * +-* $Revision: 5 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:15 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/parser.cpp ++++ raidutils-0.0.6/raidutil/parser.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 101 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:12 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-config.obj: config.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-config.obj -MD -MP -MF "$(DEPDIR)/raidutil-config.Tpo" -c -o raidutil-config.obj `if test -f 'config.cpp'; then $(CYGPATH_W) 'config.cpp'; else $(CYGPATH_W) '$(srcdir)/config.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-config.Tpo" "$(DEPDIR)/raidutil-config.Po"; else rm -f "$(DEPDIR)/raidutil-config.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-config.obj -MD -MP -MF $(DEPDIR)/raidutil-config.Tpo -c -o raidutil-config.obj `if test -f 'config.cpp'; then $(CYGPATH_W) 'config.cpp'; else $(CYGPATH_W) '$(srcdir)/config.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-config.Tpo $(DEPDIR)/raidutil-config.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='config.cpp' object='raidutil-config.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-config.obj `if test -f 'config.cpp'; then $(CYGPATH_W) 'config.cpp'; else $(CYGPATH_W) '$(srcdir)/config.cpp'; fi` + /*** INCLUDES ***/ +@@ -730,6 +733,7 @@ DELETE_HOT_SPARE: + { + EventLog *temp = new EventLog (components, eventLogOpts); + cmd_List->add_Item (*temp); ++ delete temp; + } + else + Error_in_Parsing(EventStrings[STR_PARSE_ERR_MUST_SPECIFY_ADDRESS], this_Commands_Text); +@@ -1645,7 +1649,7 @@ END_OF_VERB: + temp = new NvramBit (Cache_Stale, params.hba_Num, temp_set); + else + temp = new NvramBit (Cache_Stale, -1, temp_set); +- cmd_List->add_Item (*temp); ++ cmd_List->add_Item (*temp); + delete temp; + } + else if (!strncmp(command_Line, "+cluster", strlen("cluster"))) +--- raidutils-0.0.6.orig/raidutil/setcache.cpp ++++ raidutils-0.0.6/raidutil/setcache.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 17 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:13 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-creatrad.o: creatrad.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-creatrad.o -MD -MP -MF "$(DEPDIR)/raidutil-creatrad.Tpo" -c -o raidutil-creatrad.o `test -f 'creatrad.cpp' || echo '$(srcdir)/'`creatrad.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-creatrad.Tpo" "$(DEPDIR)/raidutil-creatrad.Po"; else rm -f "$(DEPDIR)/raidutil-creatrad.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-creatrad.o -MD -MP -MF $(DEPDIR)/raidutil-creatrad.Tpo -c -o raidutil-creatrad.o `test -f 'creatrad.cpp' || echo '$(srcdir)/'`creatrad.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-creatrad.Tpo $(DEPDIR)/raidutil-creatrad.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='creatrad.cpp' object='raidutil-creatrad.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-creatrad.o `test -f 'creatrad.cpp' || echo '$(srcdir)/'`creatrad.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/parserr.cpp ++++ raidutils-0.0.6/raidutil/parserr.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 5 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:13 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-creatrad.obj: creatrad.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-creatrad.obj -MD -MP -MF "$(DEPDIR)/raidutil-creatrad.Tpo" -c -o raidutil-creatrad.obj `if test -f 'creatrad.cpp'; then $(CYGPATH_W) 'creatrad.cpp'; else $(CYGPATH_W) '$(srcdir)/creatrad.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-creatrad.Tpo" "$(DEPDIR)/raidutil-creatrad.Po"; else rm -f "$(DEPDIR)/raidutil-creatrad.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-creatrad.obj -MD -MP -MF $(DEPDIR)/raidutil-creatrad.Tpo -c -o raidutil-creatrad.obj `if test -f 'creatrad.cpp'; then $(CYGPATH_W) 'creatrad.cpp'; else $(CYGPATH_W) '$(srcdir)/creatrad.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-creatrad.Tpo $(DEPDIR)/raidutil-creatrad.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='creatrad.cpp' object='raidutil-creatrad.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-creatrad.obj `if test -f 'creatrad.cpp'; then $(CYGPATH_W) 'creatrad.cpp'; else $(CYGPATH_W) '$(srcdir)/creatrad.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/setspeed.cpp ++++ raidutils-0.0.6/raidutil/setspeed.cpp +@@ -38,9 +38,12 @@ + * Description: This command sets the bus speed. + * Version Control: + * +-* $Revision: 13 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:11 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-deletrad.o: deletrad.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-deletrad.o -MD -MP -MF "$(DEPDIR)/raidutil-deletrad.Tpo" -c -o raidutil-deletrad.o `test -f 'deletrad.cpp' || echo '$(srcdir)/'`deletrad.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-deletrad.Tpo" "$(DEPDIR)/raidutil-deletrad.Po"; else rm -f "$(DEPDIR)/raidutil-deletrad.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-deletrad.o -MD -MP -MF $(DEPDIR)/raidutil-deletrad.Tpo -c -o raidutil-deletrad.o `test -f 'deletrad.cpp' || echo '$(srcdir)/'`deletrad.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-deletrad.Tpo $(DEPDIR)/raidutil-deletrad.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='deletrad.cpp' object='raidutil-deletrad.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-deletrad.o `test -f 'deletrad.cpp' || echo '$(srcdir)/'`deletrad.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/lzstrbuf.cpp ++++ raidutils-0.0.6/raidutil/lzstrbuf.cpp +@@ -41,9 +41,12 @@ + * + * Version Control: + * +-* $Revision: 3 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-05-05 12:49:55 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-deletrad.obj: deletrad.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-deletrad.obj -MD -MP -MF "$(DEPDIR)/raidutil-deletrad.Tpo" -c -o raidutil-deletrad.obj `if test -f 'deletrad.cpp'; then $(CYGPATH_W) 'deletrad.cpp'; else $(CYGPATH_W) '$(srcdir)/deletrad.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-deletrad.Tpo" "$(DEPDIR)/raidutil-deletrad.Po"; else rm -f "$(DEPDIR)/raidutil-deletrad.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-deletrad.obj -MD -MP -MF $(DEPDIR)/raidutil-deletrad.Tpo -c -o raidutil-deletrad.obj `if test -f 'deletrad.cpp'; then $(CYGPATH_W) 'deletrad.cpp'; else $(CYGPATH_W) '$(srcdir)/deletrad.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-deletrad.Tpo $(DEPDIR)/raidutil-deletrad.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='deletrad.cpp' object='raidutil-deletrad.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-deletrad.obj `if test -f 'deletrad.cpp'; then $(CYGPATH_W) 'deletrad.cpp'; else $(CYGPATH_W) '$(srcdir)/deletrad.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/dynsize.cpp ++++ raidutils-0.0.6/raidutil/dynsize.cpp +@@ -39,9 +39,12 @@ + * class. + * Version Control: + * +-* $Revision: 3 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:13 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-dynsize.o: dynsize.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-dynsize.o -MD -MP -MF "$(DEPDIR)/raidutil-dynsize.Tpo" -c -o raidutil-dynsize.o `test -f 'dynsize.cpp' || echo '$(srcdir)/'`dynsize.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-dynsize.Tpo" "$(DEPDIR)/raidutil-dynsize.Po"; else rm -f "$(DEPDIR)/raidutil-dynsize.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-dynsize.o -MD -MP -MF $(DEPDIR)/raidutil-dynsize.Tpo -c -o raidutil-dynsize.o `test -f 'dynsize.cpp' || echo '$(srcdir)/'`dynsize.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-dynsize.Tpo $(DEPDIR)/raidutil-dynsize.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='dynsize.cpp' object='raidutil-dynsize.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-dynsize.o `test -f 'dynsize.cpp' || echo '$(srcdir)/'`dynsize.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/config.cpp ++++ raidutils-0.0.6/raidutil/config.cpp +@@ -38,9 +38,12 @@ + * Description: This command loads and saves controller configuration + * Version Control: + * +-* $Revision: 7 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:12 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-dynsize.obj: dynsize.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-dynsize.obj -MD -MP -MF "$(DEPDIR)/raidutil-dynsize.Tpo" -c -o raidutil-dynsize.obj `if test -f 'dynsize.cpp'; then $(CYGPATH_W) 'dynsize.cpp'; else $(CYGPATH_W) '$(srcdir)/dynsize.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-dynsize.Tpo" "$(DEPDIR)/raidutil-dynsize.Po"; else rm -f "$(DEPDIR)/raidutil-dynsize.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-dynsize.obj -MD -MP -MF $(DEPDIR)/raidutil-dynsize.Tpo -c -o raidutil-dynsize.obj `if test -f 'dynsize.cpp'; then $(CYGPATH_W) 'dynsize.cpp'; else $(CYGPATH_W) '$(srcdir)/dynsize.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-dynsize.Tpo $(DEPDIR)/raidutil-dynsize.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='dynsize.cpp' object='raidutil-dynsize.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-dynsize.obj `if test -f 'dynsize.cpp'; then $(CYGPATH_W) 'dynsize.cpp'; else $(CYGPATH_W) '$(srcdir)/dynsize.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/parsargv.hpp ++++ raidutils-0.0.6/raidutil/parsargv.hpp +@@ -43,9 +43,12 @@ + ctor to construct that. + * Version Control: + * +-* $Revision: 5 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-engiface.o: engiface.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-engiface.o -MD -MP -MF "$(DEPDIR)/raidutil-engiface.Tpo" -c -o raidutil-engiface.o `test -f 'engiface.cpp' || echo '$(srcdir)/'`engiface.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-engiface.Tpo" "$(DEPDIR)/raidutil-engiface.Po"; else rm -f "$(DEPDIR)/raidutil-engiface.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-engiface.o -MD -MP -MF $(DEPDIR)/raidutil-engiface.Tpo -c -o raidutil-engiface.o `test -f 'engiface.cpp' || echo '$(srcdir)/'`engiface.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-engiface.Tpo $(DEPDIR)/raidutil-engiface.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='engiface.cpp' object='raidutil-engiface.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-engiface.o `test -f 'engiface.cpp' || echo '$(srcdir)/'`engiface.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/eventlog.hpp ++++ raidutils-0.0.6/raidutil/eventlog.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 7 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ - raidutil-engiface.obj: engiface.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-engiface.obj -MD -MP -MF "$(DEPDIR)/raidutil-engiface.Tpo" -c -o raidutil-engiface.obj `if test -f 'engiface.cpp'; then $(CYGPATH_W) 'engiface.cpp'; else $(CYGPATH_W) '$(srcdir)/engiface.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-engiface.Tpo" "$(DEPDIR)/raidutil-engiface.Po"; else rm -f "$(DEPDIR)/raidutil-engiface.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-engiface.obj -MD -MP -MF $(DEPDIR)/raidutil-engiface.Tpo -c -o raidutil-engiface.obj `if test -f 'engiface.cpp'; then $(CYGPATH_W) 'engiface.cpp'; else $(CYGPATH_W) '$(srcdir)/engiface.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-engiface.Tpo $(DEPDIR)/raidutil-engiface.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='engiface.cpp' object='raidutil-engiface.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-engiface.obj `if test -f 'engiface.cpp'; then $(CYGPATH_W) 'engiface.cpp'; else $(CYGPATH_W) '$(srcdir)/engiface.cpp'; fi` + /*** INCLUDES ***/ +@@ -77,7 +80,7 @@ class EventLog:public Command + { - raidutil-eventlog.o: eventlog.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-eventlog.o -MD -MP -MF "$(DEPDIR)/raidutil-eventlog.Tpo" -c -o raidutil-eventlog.o `test -f 'eventlog.cpp' || echo '$(srcdir)/'`eventlog.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-eventlog.Tpo" "$(DEPDIR)/raidutil-eventlog.Po"; else rm -f "$(DEPDIR)/raidutil-eventlog.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-eventlog.o -MD -MP -MF $(DEPDIR)/raidutil-eventlog.Tpo -c -o raidutil-eventlog.o `test -f 'eventlog.cpp' || echo '$(srcdir)/'`eventlog.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-eventlog.Tpo $(DEPDIR)/raidutil-eventlog.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='eventlog.cpp' object='raidutil-eventlog.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-eventlog.o `test -f 'eventlog.cpp' || echo '$(srcdir)/'`eventlog.cpp + public: +- EventLog::EventLog(SCSI_Addr_List *deviceList, ++ EventLog(SCSI_Addr_List *deviceList, + EventLogOptions cmd); + EventLog(const EventLog &new_EventLog); + virtual ~EventLog(); +--- raidutils-0.0.6.orig/raidutil/rscenum.h ++++ raidutils-0.0.6/raidutil/rscenum.h +@@ -593,7 +593,7 @@ enum StringNames { + STR_ERR_FWD_NOT_INITIALIZED, + STR_ERR_FWD_BLK_MISMATCH, + STR_ERR_FWD_BLK_OVERFLOW, +- STR_ERR_RSV_REMOVEABLE, ++ STR_ERR_RSV_REMOVABLE, + STR_ERR_RSV_NOT_DASD, + STR_ERR_RSV_NON_ZERO, + STR_ERR_RSV_HBA_UNABLE, +--- raidutils-0.0.6.orig/raidutil/setscfg.hpp ++++ raidutils-0.0.6/raidutil/setscfg.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 2 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ - raidutil-eventlog.obj: eventlog.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-eventlog.obj -MD -MP -MF "$(DEPDIR)/raidutil-eventlog.Tpo" -c -o raidutil-eventlog.obj `if test -f 'eventlog.cpp'; then $(CYGPATH_W) 'eventlog.cpp'; else $(CYGPATH_W) '$(srcdir)/eventlog.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-eventlog.Tpo" "$(DEPDIR)/raidutil-eventlog.Po"; else rm -f "$(DEPDIR)/raidutil-eventlog.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-eventlog.obj -MD -MP -MF $(DEPDIR)/raidutil-eventlog.Tpo -c -o raidutil-eventlog.obj `if test -f 'eventlog.cpp'; then $(CYGPATH_W) 'eventlog.cpp'; else $(CYGPATH_W) '$(srcdir)/eventlog.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-eventlog.Tpo $(DEPDIR)/raidutil-eventlog.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='eventlog.cpp' object='raidutil-eventlog.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-eventlog.obj `if test -f 'eventlog.cpp'; then $(CYGPATH_W) 'eventlog.cpp'; else $(CYGPATH_W) '$(srcdir)/eventlog.cpp'; fi` + /*** INCLUDES ***/ +@@ -59,7 +62,7 @@ class setscfg:public Command + { - raidutil-expand.o: expand.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-expand.o -MD -MP -MF "$(DEPDIR)/raidutil-expand.Tpo" -c -o raidutil-expand.o `test -f 'expand.cpp' || echo '$(srcdir)/'`expand.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-expand.Tpo" "$(DEPDIR)/raidutil-expand.Po"; else rm -f "$(DEPDIR)/raidutil-expand.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-expand.o -MD -MP -MF $(DEPDIR)/raidutil-expand.Tpo -c -o raidutil-expand.o `test -f 'expand.cpp' || echo '$(srcdir)/'`expand.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-expand.Tpo $(DEPDIR)/raidutil-expand.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='expand.cpp' object='raidutil-expand.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-expand.o `test -f 'expand.cpp' || echo '$(srcdir)/'`expand.cpp + public: +- setscfg::setscfg(); ++ setscfg(); + virtual ~setscfg(); - raidutil-expand.obj: expand.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-expand.obj -MD -MP -MF "$(DEPDIR)/raidutil-expand.Tpo" -c -o raidutil-expand.obj `if test -f 'expand.cpp'; then $(CYGPATH_W) 'expand.cpp'; else $(CYGPATH_W) '$(srcdir)/expand.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-expand.Tpo" "$(DEPDIR)/raidutil-expand.Po"; else rm -f "$(DEPDIR)/raidutil-expand.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-expand.obj -MD -MP -MF $(DEPDIR)/raidutil-expand.Tpo -c -o raidutil-expand.obj `if test -f 'expand.cpp'; then $(CYGPATH_W) 'expand.cpp'; else $(CYGPATH_W) '$(srcdir)/expand.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-expand.Tpo $(DEPDIR)/raidutil-expand.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='expand.cpp' object='raidutil-expand.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-expand.obj `if test -f 'expand.cpp'; then $(CYGPATH_W) 'expand.cpp'; else $(CYGPATH_W) '$(srcdir)/expand.cpp'; fi` + Dpt_Error execute(String_List **output); +--- raidutils-0.0.6.orig/raidutil/rmwflash.hpp ++++ raidutils-0.0.6/raidutil/rmwflash.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 1 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ - raidutil-flash.o: flash.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flash.o -MD -MP -MF "$(DEPDIR)/raidutil-flash.Tpo" -c -o raidutil-flash.o `test -f 'flash.cpp' || echo '$(srcdir)/'`flash.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-flash.Tpo" "$(DEPDIR)/raidutil-flash.Po"; else rm -f "$(DEPDIR)/raidutil-flash.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flash.o -MD -MP -MF $(DEPDIR)/raidutil-flash.Tpo -c -o raidutil-flash.o `test -f 'flash.cpp' || echo '$(srcdir)/'`flash.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-flash.Tpo $(DEPDIR)/raidutil-flash.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='flash.cpp' object='raidutil-flash.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-flash.o `test -f 'flash.cpp' || echo '$(srcdir)/'`flash.cpp + /*** INCLUDES ***/ +@@ -59,7 +62,7 @@ class RMWFlash:public Command + { - raidutil-flash.obj: flash.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flash.obj -MD -MP -MF "$(DEPDIR)/raidutil-flash.Tpo" -c -o raidutil-flash.obj `if test -f 'flash.cpp'; then $(CYGPATH_W) 'flash.cpp'; else $(CYGPATH_W) '$(srcdir)/flash.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-flash.Tpo" "$(DEPDIR)/raidutil-flash.Po"; else rm -f "$(DEPDIR)/raidutil-flash.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flash.obj -MD -MP -MF $(DEPDIR)/raidutil-flash.Tpo -c -o raidutil-flash.obj `if test -f 'flash.cpp'; then $(CYGPATH_W) 'flash.cpp'; else $(CYGPATH_W) '$(srcdir)/flash.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-flash.Tpo $(DEPDIR)/raidutil-flash.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='flash.cpp' object='raidutil-flash.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-flash.obj `if test -f 'flash.cpp'; then $(CYGPATH_W) 'flash.cpp'; else $(CYGPATH_W) '$(srcdir)/flash.cpp'; fi` + public: +- RMWFlash::RMWFlash(int hbaNo, char *Data, int Region, unsigned long Offset, unsigned Size); ++ RMWFlash(int hbaNo, char *Data, int Region, unsigned long Offset, unsigned Size); + RMWFlash(const RMWFlash &new_RMWFlash); + virtual ~RMWFlash(); - raidutil-flashmem.o: flashmem.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flashmem.o -MD -MP -MF "$(DEPDIR)/raidutil-flashmem.Tpo" -c -o raidutil-flashmem.o `test -f 'flashmem.cpp' || echo '$(srcdir)/'`flashmem.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-flashmem.Tpo" "$(DEPDIR)/raidutil-flashmem.Po"; else rm -f "$(DEPDIR)/raidutil-flashmem.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flashmem.o -MD -MP -MF $(DEPDIR)/raidutil-flashmem.Tpo -c -o raidutil-flashmem.o `test -f 'flashmem.cpp' || echo '$(srcdir)/'`flashmem.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-flashmem.Tpo $(DEPDIR)/raidutil-flashmem.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='flashmem.cpp' object='raidutil-flashmem.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-flashmem.o `test -f 'flashmem.cpp' || echo '$(srcdir)/'`flashmem.cpp +--- raidutils-0.0.6.orig/raidutil/cmdlist.hpp ++++ raidutils-0.0.6/raidutil/cmdlist.hpp +@@ -43,9 +43,12 @@ + solution. + * Version Control: + * +-* $Revision: 5 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:12 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-flashmem.obj: flashmem.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flashmem.obj -MD -MP -MF "$(DEPDIR)/raidutil-flashmem.Tpo" -c -o raidutil-flashmem.obj `if test -f 'flashmem.cpp'; then $(CYGPATH_W) 'flashmem.cpp'; else $(CYGPATH_W) '$(srcdir)/flashmem.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-flashmem.Tpo" "$(DEPDIR)/raidutil-flashmem.Po"; else rm -f "$(DEPDIR)/raidutil-flashmem.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flashmem.obj -MD -MP -MF $(DEPDIR)/raidutil-flashmem.Tpo -c -o raidutil-flashmem.obj `if test -f 'flashmem.cpp'; then $(CYGPATH_W) 'flashmem.cpp'; else $(CYGPATH_W) '$(srcdir)/flashmem.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-flashmem.Tpo $(DEPDIR)/raidutil-flashmem.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='flashmem.cpp' object='raidutil-flashmem.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-flashmem.obj `if test -f 'flashmem.cpp'; then $(CYGPATH_W) 'flashmem.cpp'; else $(CYGPATH_W) '$(srcdir)/flashmem.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/rdutlosd.h ++++ raidutils-0.0.6/raidutil/rdutlosd.h +@@ -41,9 +41,12 @@ + * Description: This is the OS dependent constants, etc. for DptUtil. + * Version Control: + * +-* $Revision: 2 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:11 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-forcest.o: forcest.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-forcest.o -MD -MP -MF "$(DEPDIR)/raidutil-forcest.Tpo" -c -o raidutil-forcest.o `test -f 'forcest.cpp' || echo '$(srcdir)/'`forcest.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-forcest.Tpo" "$(DEPDIR)/raidutil-forcest.Po"; else rm -f "$(DEPDIR)/raidutil-forcest.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-forcest.o -MD -MP -MF $(DEPDIR)/raidutil-forcest.Tpo -c -o raidutil-forcest.o `test -f 'forcest.cpp' || echo '$(srcdir)/'`forcest.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-forcest.Tpo $(DEPDIR)/raidutil-forcest.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='forcest.cpp' object='raidutil-forcest.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-forcest.o `test -f 'forcest.cpp' || echo '$(srcdir)/'`forcest.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/showinq.hpp ++++ raidutils-0.0.6/raidutil/showinq.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 5 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:12 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-forcest.obj: forcest.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-forcest.obj -MD -MP -MF "$(DEPDIR)/raidutil-forcest.Tpo" -c -o raidutil-forcest.obj `if test -f 'forcest.cpp'; then $(CYGPATH_W) 'forcest.cpp'; else $(CYGPATH_W) '$(srcdir)/forcest.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-forcest.Tpo" "$(DEPDIR)/raidutil-forcest.Po"; else rm -f "$(DEPDIR)/raidutil-forcest.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-forcest.obj -MD -MP -MF $(DEPDIR)/raidutil-forcest.Tpo -c -o raidutil-forcest.obj `if test -f 'forcest.cpp'; then $(CYGPATH_W) 'forcest.cpp'; else $(CYGPATH_W) '$(srcdir)/forcest.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-forcest.Tpo $(DEPDIR)/raidutil-forcest.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='forcest.cpp' object='raidutil-forcest.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-forcest.obj `if test -f 'forcest.cpp'; then $(CYGPATH_W) 'forcest.cpp'; else $(CYGPATH_W) '$(srcdir)/forcest.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/flash.cpp ++++ raidutils-0.0.6/raidutil/flash.cpp +@@ -39,9 +39,12 @@ + * Description: This command flashes the specified controller + * Version Control: + * +-* $Revision: 68 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-05-05 12:45:48 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-id_list.o: id_list.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-id_list.o -MD -MP -MF "$(DEPDIR)/raidutil-id_list.Tpo" -c -o raidutil-id_list.o `test -f 'id_list.cpp' || echo '$(srcdir)/'`id_list.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-id_list.Tpo" "$(DEPDIR)/raidutil-id_list.Po"; else rm -f "$(DEPDIR)/raidutil-id_list.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-id_list.o -MD -MP -MF $(DEPDIR)/raidutil-id_list.Tpo -c -o raidutil-id_list.o `test -f 'id_list.cpp' || echo '$(srcdir)/'`id_list.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-id_list.Tpo $(DEPDIR)/raidutil-id_list.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='id_list.cpp' object='raidutil-id_list.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-id_list.o `test -f 'id_list.cpp' || echo '$(srcdir)/'`id_list.cpp + /*** INCLUDES ***/ +@@ -176,13 +179,7 @@ Flash::Flash( + Flash::Flash( const Flash &right ) + { + ENTER( "Flash::Flash(" ); +- +-#if defined _DPT_UNIXWARE || defined _DPT_SCO + Flash( right.source, right.Resync, right.hba_Num ); +-#else +- Flash::Flash( right.source, right.Resync, right.hba_Num ); +-#endif +- + EXIT(); + } - raidutil-id_list.obj: id_list.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-id_list.obj -MD -MP -MF "$(DEPDIR)/raidutil-id_list.Tpo" -c -o raidutil-id_list.obj `if test -f 'id_list.cpp'; then $(CYGPATH_W) 'id_list.cpp'; else $(CYGPATH_W) '$(srcdir)/id_list.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-id_list.Tpo" "$(DEPDIR)/raidutil-id_list.Po"; else rm -f "$(DEPDIR)/raidutil-id_list.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-id_list.obj -MD -MP -MF $(DEPDIR)/raidutil-id_list.Tpo -c -o raidutil-id_list.obj `if test -f 'id_list.cpp'; then $(CYGPATH_W) 'id_list.cpp'; else $(CYGPATH_W) '$(srcdir)/id_list.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-id_list.Tpo $(DEPDIR)/raidutil-id_list.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='id_list.cpp' object='raidutil-id_list.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-id_list.obj `if test -f 'id_list.cpp'; then $(CYGPATH_W) 'id_list.cpp'; else $(CYGPATH_W) '$(srcdir)/id_list.cpp'; fi` +--- raidutils-0.0.6.orig/raidutil/flashmem.h ++++ raidutils-0.0.6/raidutil/flashmem.h +@@ -60,9 +60,12 @@ + * + * Version Control: + * +-* $Revision: 4 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-05-05 12:46:43 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-intlist.o: intlist.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-intlist.o -MD -MP -MF "$(DEPDIR)/raidutil-intlist.Tpo" -c -o raidutil-intlist.o `test -f 'intlist.cpp' || echo '$(srcdir)/'`intlist.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-intlist.Tpo" "$(DEPDIR)/raidutil-intlist.Po"; else rm -f "$(DEPDIR)/raidutil-intlist.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-intlist.o -MD -MP -MF $(DEPDIR)/raidutil-intlist.Tpo -c -o raidutil-intlist.o `test -f 'intlist.cpp' || echo '$(srcdir)/'`intlist.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-intlist.Tpo $(DEPDIR)/raidutil-intlist.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='intlist.cpp' object='raidutil-intlist.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-intlist.o `test -f 'intlist.cpp' || echo '$(srcdir)/'`intlist.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/modnvram.hpp ++++ raidutils-0.0.6/raidutil/modnvram.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 8 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:12 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-intlist.obj: intlist.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-intlist.obj -MD -MP -MF "$(DEPDIR)/raidutil-intlist.Tpo" -c -o raidutil-intlist.obj `if test -f 'intlist.cpp'; then $(CYGPATH_W) 'intlist.cpp'; else $(CYGPATH_W) '$(srcdir)/intlist.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-intlist.Tpo" "$(DEPDIR)/raidutil-intlist.Po"; else rm -f "$(DEPDIR)/raidutil-intlist.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-intlist.obj -MD -MP -MF $(DEPDIR)/raidutil-intlist.Tpo -c -o raidutil-intlist.obj `if test -f 'intlist.cpp'; then $(CYGPATH_W) 'intlist.cpp'; else $(CYGPATH_W) '$(srcdir)/intlist.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-intlist.Tpo $(DEPDIR)/raidutil-intlist.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='intlist.cpp' object='raidutil-intlist.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-intlist.obj `if test -f 'intlist.cpp'; then $(CYGPATH_W) 'intlist.cpp'; else $(CYGPATH_W) '$(srcdir)/intlist.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/deletrad.cpp ++++ raidutils-0.0.6/raidutil/deletrad.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 22 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:11 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-listdev.o: listdev.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-listdev.o -MD -MP -MF "$(DEPDIR)/raidutil-listdev.Tpo" -c -o raidutil-listdev.o `test -f 'listdev.cpp' || echo '$(srcdir)/'`listdev.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-listdev.Tpo" "$(DEPDIR)/raidutil-listdev.Po"; else rm -f "$(DEPDIR)/raidutil-listdev.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-listdev.o -MD -MP -MF $(DEPDIR)/raidutil-listdev.Tpo -c -o raidutil-listdev.o `test -f 'listdev.cpp' || echo '$(srcdir)/'`listdev.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-listdev.Tpo $(DEPDIR)/raidutil-listdev.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='listdev.cpp' object='raidutil-listdev.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-listdev.o `test -f 'listdev.cpp' || echo '$(srcdir)/'`listdev.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/expand.cpp ++++ raidutils-0.0.6/raidutil/expand.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 4 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:11 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-listdev.obj: listdev.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-listdev.obj -MD -MP -MF "$(DEPDIR)/raidutil-listdev.Tpo" -c -o raidutil-listdev.obj `if test -f 'listdev.cpp'; then $(CYGPATH_W) 'listdev.cpp'; else $(CYGPATH_W) '$(srcdir)/listdev.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-listdev.Tpo" "$(DEPDIR)/raidutil-listdev.Po"; else rm -f "$(DEPDIR)/raidutil-listdev.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-listdev.obj -MD -MP -MF $(DEPDIR)/raidutil-listdev.Tpo -c -o raidutil-listdev.obj `if test -f 'listdev.cpp'; then $(CYGPATH_W) 'listdev.cpp'; else $(CYGPATH_W) '$(srcdir)/listdev.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-listdev.Tpo $(DEPDIR)/raidutil-listdev.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='listdev.cpp' object='raidutil-listdev.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-listdev.obj `if test -f 'listdev.cpp'; then $(CYGPATH_W) 'listdev.cpp'; else $(CYGPATH_W) '$(srcdir)/listdev.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/rawdata.hpp ++++ raidutils-0.0.6/raidutil/rawdata.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 1 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:15 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-lzssdon.o: lzssdon.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzssdon.o -MD -MP -MF "$(DEPDIR)/raidutil-lzssdon.Tpo" -c -o raidutil-lzssdon.o `test -f 'lzssdon.cpp' || echo '$(srcdir)/'`lzssdon.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-lzssdon.Tpo" "$(DEPDIR)/raidutil-lzssdon.Po"; else rm -f "$(DEPDIR)/raidutil-lzssdon.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzssdon.o -MD -MP -MF $(DEPDIR)/raidutil-lzssdon.Tpo -c -o raidutil-lzssdon.o `test -f 'lzssdon.cpp' || echo '$(srcdir)/'`lzssdon.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-lzssdon.Tpo $(DEPDIR)/raidutil-lzssdon.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='lzssdon.cpp' object='raidutil-lzssdon.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-lzssdon.o `test -f 'lzssdon.cpp' || echo '$(srcdir)/'`lzssdon.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/usage.cpp ++++ raidutils-0.0.6/raidutil/usage.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 35 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-lzssdon.obj: lzssdon.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzssdon.obj -MD -MP -MF "$(DEPDIR)/raidutil-lzssdon.Tpo" -c -o raidutil-lzssdon.obj `if test -f 'lzssdon.cpp'; then $(CYGPATH_W) 'lzssdon.cpp'; else $(CYGPATH_W) '$(srcdir)/lzssdon.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-lzssdon.Tpo" "$(DEPDIR)/raidutil-lzssdon.Po"; else rm -f "$(DEPDIR)/raidutil-lzssdon.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzssdon.obj -MD -MP -MF $(DEPDIR)/raidutil-lzssdon.Tpo -c -o raidutil-lzssdon.obj `if test -f 'lzssdon.cpp'; then $(CYGPATH_W) 'lzssdon.cpp'; else $(CYGPATH_W) '$(srcdir)/lzssdon.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-lzssdon.Tpo $(DEPDIR)/raidutil-lzssdon.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='lzssdon.cpp' object='raidutil-lzssdon.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-lzssdon.obj `if test -f 'lzssdon.cpp'; then $(CYGPATH_W) 'lzssdon.cpp'; else $(CYGPATH_W) '$(srcdir)/lzssdon.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/taskctrl.cpp ++++ raidutils-0.0.6/raidutil/taskctrl.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 15 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-lzstrbuf.o: lzstrbuf.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzstrbuf.o -MD -MP -MF "$(DEPDIR)/raidutil-lzstrbuf.Tpo" -c -o raidutil-lzstrbuf.o `test -f 'lzstrbuf.cpp' || echo '$(srcdir)/'`lzstrbuf.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-lzstrbuf.Tpo" "$(DEPDIR)/raidutil-lzstrbuf.Po"; else rm -f "$(DEPDIR)/raidutil-lzstrbuf.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzstrbuf.o -MD -MP -MF $(DEPDIR)/raidutil-lzstrbuf.Tpo -c -o raidutil-lzstrbuf.o `test -f 'lzstrbuf.cpp' || echo '$(srcdir)/'`lzstrbuf.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-lzstrbuf.Tpo $(DEPDIR)/raidutil-lzstrbuf.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='lzstrbuf.cpp' object='raidutil-lzstrbuf.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-lzstrbuf.o `test -f 'lzstrbuf.cpp' || echo '$(srcdir)/'`lzstrbuf.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/flashmem.cpp ++++ raidutils-0.0.6/raidutil/flashmem.cpp +@@ -59,9 +59,12 @@ + * + * Version Control: + * +-* $Revision: 5 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-05-05 12:49:12 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-lzstrbuf.obj: lzstrbuf.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzstrbuf.obj -MD -MP -MF "$(DEPDIR)/raidutil-lzstrbuf.Tpo" -c -o raidutil-lzstrbuf.obj `if test -f 'lzstrbuf.cpp'; then $(CYGPATH_W) 'lzstrbuf.cpp'; else $(CYGPATH_W) '$(srcdir)/lzstrbuf.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-lzstrbuf.Tpo" "$(DEPDIR)/raidutil-lzstrbuf.Po"; else rm -f "$(DEPDIR)/raidutil-lzstrbuf.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzstrbuf.obj -MD -MP -MF $(DEPDIR)/raidutil-lzstrbuf.Tpo -c -o raidutil-lzstrbuf.obj `if test -f 'lzstrbuf.cpp'; then $(CYGPATH_W) 'lzstrbuf.cpp'; else $(CYGPATH_W) '$(srcdir)/lzstrbuf.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-lzstrbuf.Tpo $(DEPDIR)/raidutil-lzstrbuf.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='lzstrbuf.cpp' object='raidutil-lzstrbuf.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-lzstrbuf.obj `if test -f 'lzstrbuf.cpp'; then $(CYGPATH_W) 'lzstrbuf.cpp'; else $(CYGPATH_W) '$(srcdir)/lzstrbuf.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/zap.hpp ++++ raidutils-0.0.6/raidutil/zap.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 2 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ - raidutil-modnvram.o: modnvram.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-modnvram.o -MD -MP -MF "$(DEPDIR)/raidutil-modnvram.Tpo" -c -o raidutil-modnvram.o `test -f 'modnvram.cpp' || echo '$(srcdir)/'`modnvram.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-modnvram.Tpo" "$(DEPDIR)/raidutil-modnvram.Po"; else rm -f "$(DEPDIR)/raidutil-modnvram.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-modnvram.o -MD -MP -MF $(DEPDIR)/raidutil-modnvram.Tpo -c -o raidutil-modnvram.o `test -f 'modnvram.cpp' || echo '$(srcdir)/'`modnvram.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-modnvram.Tpo $(DEPDIR)/raidutil-modnvram.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='modnvram.cpp' object='raidutil-modnvram.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-modnvram.o `test -f 'modnvram.cpp' || echo '$(srcdir)/'`modnvram.cpp + /*** INCLUDES ***/ +@@ -55,7 +58,7 @@ + class Zap:public Command + { + public: +- Zap::Zap( ++ Zap( + SCSI_Addr_List *addresses, // a list of addresses + int resync = 0 // (send reset to hba or not) + ); // to delete raid tables on +--- raidutils-0.0.6.orig/raidutil/debug.hpp ++++ raidutils-0.0.6/raidutil/debug.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 1 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-modnvram.obj: modnvram.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-modnvram.obj -MD -MP -MF "$(DEPDIR)/raidutil-modnvram.Tpo" -c -o raidutil-modnvram.obj `if test -f 'modnvram.cpp'; then $(CYGPATH_W) 'modnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/modnvram.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-modnvram.Tpo" "$(DEPDIR)/raidutil-modnvram.Po"; else rm -f "$(DEPDIR)/raidutil-modnvram.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-modnvram.obj -MD -MP -MF $(DEPDIR)/raidutil-modnvram.Tpo -c -o raidutil-modnvram.obj `if test -f 'modnvram.cpp'; then $(CYGPATH_W) 'modnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/modnvram.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-modnvram.Tpo $(DEPDIR)/raidutil-modnvram.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='modnvram.cpp' object='raidutil-modnvram.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-modnvram.obj `if test -f 'modnvram.cpp'; then $(CYGPATH_W) 'modnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/modnvram.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/creatrad.hpp ++++ raidutils-0.0.6/raidutil/creatrad.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 13 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-namarray.o: namarray.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-namarray.o -MD -MP -MF "$(DEPDIR)/raidutil-namarray.Tpo" -c -o raidutil-namarray.o `test -f 'namarray.cpp' || echo '$(srcdir)/'`namarray.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-namarray.Tpo" "$(DEPDIR)/raidutil-namarray.Po"; else rm -f "$(DEPDIR)/raidutil-namarray.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-namarray.o -MD -MP -MF $(DEPDIR)/raidutil-namarray.Tpo -c -o raidutil-namarray.o `test -f 'namarray.cpp' || echo '$(srcdir)/'`namarray.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-namarray.Tpo $(DEPDIR)/raidutil-namarray.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='namarray.cpp' object='raidutil-namarray.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-namarray.o `test -f 'namarray.cpp' || echo '$(srcdir)/'`namarray.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/rdutlosd.cpp ++++ raidutils-0.0.6/raidutil/rdutlosd.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 1 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-namarray.obj: namarray.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-namarray.obj -MD -MP -MF "$(DEPDIR)/raidutil-namarray.Tpo" -c -o raidutil-namarray.obj `if test -f 'namarray.cpp'; then $(CYGPATH_W) 'namarray.cpp'; else $(CYGPATH_W) '$(srcdir)/namarray.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-namarray.Tpo" "$(DEPDIR)/raidutil-namarray.Po"; else rm -f "$(DEPDIR)/raidutil-namarray.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-namarray.obj -MD -MP -MF $(DEPDIR)/raidutil-namarray.Tpo -c -o raidutil-namarray.obj `if test -f 'namarray.cpp'; then $(CYGPATH_W) 'namarray.cpp'; else $(CYGPATH_W) '$(srcdir)/namarray.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-namarray.Tpo $(DEPDIR)/raidutil-namarray.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='namarray.cpp' object='raidutil-namarray.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-namarray.obj `if test -f 'namarray.cpp'; then $(CYGPATH_W) 'namarray.cpp'; else $(CYGPATH_W) '$(srcdir)/namarray.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/rstnvram.cpp ++++ raidutils-0.0.6/raidutil/rstnvram.cpp +@@ -39,9 +39,12 @@ + * Description: + * Version Control: + * +-* $Revision: 12 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-nvrambit.o: nvrambit.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-nvrambit.o -MD -MP -MF "$(DEPDIR)/raidutil-nvrambit.Tpo" -c -o raidutil-nvrambit.o `test -f 'nvrambit.cpp' || echo '$(srcdir)/'`nvrambit.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-nvrambit.Tpo" "$(DEPDIR)/raidutil-nvrambit.Po"; else rm -f "$(DEPDIR)/raidutil-nvrambit.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-nvrambit.o -MD -MP -MF $(DEPDIR)/raidutil-nvrambit.Tpo -c -o raidutil-nvrambit.o `test -f 'nvrambit.cpp' || echo '$(srcdir)/'`nvrambit.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-nvrambit.Tpo $(DEPDIR)/raidutil-nvrambit.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='nvrambit.cpp' object='raidutil-nvrambit.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-nvrambit.o `test -f 'nvrambit.cpp' || echo '$(srcdir)/'`nvrambit.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/command.hpp ++++ raidutils-0.0.6/raidutil/command.hpp +@@ -44,9 +44,12 @@ + * gathered by the derived object. + * Version Control: + * +-* $Revision: 37 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:11 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-nvrambit.obj: nvrambit.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-nvrambit.obj -MD -MP -MF "$(DEPDIR)/raidutil-nvrambit.Tpo" -c -o raidutil-nvrambit.obj `if test -f 'nvrambit.cpp'; then $(CYGPATH_W) 'nvrambit.cpp'; else $(CYGPATH_W) '$(srcdir)/nvrambit.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-nvrambit.Tpo" "$(DEPDIR)/raidutil-nvrambit.Po"; else rm -f "$(DEPDIR)/raidutil-nvrambit.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-nvrambit.obj -MD -MP -MF $(DEPDIR)/raidutil-nvrambit.Tpo -c -o raidutil-nvrambit.obj `if test -f 'nvrambit.cpp'; then $(CYGPATH_W) 'nvrambit.cpp'; else $(CYGPATH_W) '$(srcdir)/nvrambit.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-nvrambit.Tpo $(DEPDIR)/raidutil-nvrambit.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='nvrambit.cpp' object='raidutil-nvrambit.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-nvrambit.obj `if test -f 'nvrambit.cpp'; then $(CYGPATH_W) 'nvrambit.cpp'; else $(CYGPATH_W) '$(srcdir)/nvrambit.cpp'; fi` + /*** INCLUDES ***/ +@@ -259,7 +262,7 @@ class Command + DPT_ERR_FWD_NOT_INITIALIZED = ERR_FWD_NOT_INITIALIZED, + DPT_ERR_FWD_BLK_MISMATCH = ERR_FWD_BLK_MISMATCH, + DPT_ERR_FWD_BLK_OVERFLOW = ERR_FWD_BLK_OVERFLOW, +- DPT_ERR_RSV_REMOVEABLE = ERR_RSV_REMOVEABLE, ++ DPT_ERR_RSV_REMOVABLE = ERR_RSV_REMOVABLE, + DPT_ERR_RSV_NOT_DASD = ERR_RSV_NOT_DASD, + DPT_ERR_RSV_NON_ZERO = ERR_RSV_NON_ZERO, + DPT_ERR_RSV_HBA_UNABLE = ERR_RSV_HBA_UNABLE, +--- raidutils-0.0.6.orig/raidutil/namarray.hpp ++++ raidutils-0.0.6/raidutil/namarray.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 1 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ - raidutil-parsargv.o: parsargv.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parsargv.o -MD -MP -MF "$(DEPDIR)/raidutil-parsargv.Tpo" -c -o raidutil-parsargv.o `test -f 'parsargv.cpp' || echo '$(srcdir)/'`parsargv.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parsargv.Tpo" "$(DEPDIR)/raidutil-parsargv.Po"; else rm -f "$(DEPDIR)/raidutil-parsargv.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parsargv.o -MD -MP -MF $(DEPDIR)/raidutil-parsargv.Tpo -c -o raidutil-parsargv.o `test -f 'parsargv.cpp' || echo '$(srcdir)/'`parsargv.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parsargv.Tpo $(DEPDIR)/raidutil-parsargv.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parsargv.cpp' object='raidutil-parsargv.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parsargv.o `test -f 'parsargv.cpp' || echo '$(srcdir)/'`parsargv.cpp + /*** INCLUDES ***/ +@@ -58,7 +61,7 @@ class NameArray:public Command + { - raidutil-parsargv.obj: parsargv.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parsargv.obj -MD -MP -MF "$(DEPDIR)/raidutil-parsargv.Tpo" -c -o raidutil-parsargv.obj `if test -f 'parsargv.cpp'; then $(CYGPATH_W) 'parsargv.cpp'; else $(CYGPATH_W) '$(srcdir)/parsargv.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parsargv.Tpo" "$(DEPDIR)/raidutil-parsargv.Po"; else rm -f "$(DEPDIR)/raidutil-parsargv.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parsargv.obj -MD -MP -MF $(DEPDIR)/raidutil-parsargv.Tpo -c -o raidutil-parsargv.obj `if test -f 'parsargv.cpp'; then $(CYGPATH_W) 'parsargv.cpp'; else $(CYGPATH_W) '$(srcdir)/parsargv.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parsargv.Tpo $(DEPDIR)/raidutil-parsargv.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parsargv.cpp' object='raidutil-parsargv.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parsargv.obj `if test -f 'parsargv.cpp'; then $(CYGPATH_W) 'parsargv.cpp'; else $(CYGPATH_W) '$(srcdir)/parsargv.cpp'; fi` + public: +- NameArray::NameArray(SCSI_Address arrayToName, char *arrayName); ++ NameArray(SCSI_Address arrayToName, char *arrayName); + NameArray(const NameArray &new_NameArray); + virtual ~NameArray(); - raidutil-parser.o: parser.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parser.o -MD -MP -MF "$(DEPDIR)/raidutil-parser.Tpo" -c -o raidutil-parser.o `test -f 'parser.cpp' || echo '$(srcdir)/'`parser.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parser.Tpo" "$(DEPDIR)/raidutil-parser.Po"; else rm -f "$(DEPDIR)/raidutil-parser.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parser.o -MD -MP -MF $(DEPDIR)/raidutil-parser.Tpo -c -o raidutil-parser.o `test -f 'parser.cpp' || echo '$(srcdir)/'`parser.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parser.Tpo $(DEPDIR)/raidutil-parser.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parser.cpp' object='raidutil-parser.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parser.o `test -f 'parser.cpp' || echo '$(srcdir)/'`parser.cpp +--- raidutils-0.0.6.orig/raidutil/pagemod.hpp ++++ raidutils-0.0.6/raidutil/pagemod.hpp +@@ -41,9 +41,12 @@ + * Description: This toggles pagenation mode on and off. + * Version Control: + * +-* $Revision: 2 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:13 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-parser.obj: parser.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parser.obj -MD -MP -MF "$(DEPDIR)/raidutil-parser.Tpo" -c -o raidutil-parser.obj `if test -f 'parser.cpp'; then $(CYGPATH_W) 'parser.cpp'; else $(CYGPATH_W) '$(srcdir)/parser.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parser.Tpo" "$(DEPDIR)/raidutil-parser.Po"; else rm -f "$(DEPDIR)/raidutil-parser.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parser.obj -MD -MP -MF $(DEPDIR)/raidutil-parser.Tpo -c -o raidutil-parser.obj `if test -f 'parser.cpp'; then $(CYGPATH_W) 'parser.cpp'; else $(CYGPATH_W) '$(srcdir)/parser.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parser.Tpo $(DEPDIR)/raidutil-parser.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parser.cpp' object='raidutil-parser.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parser.obj `if test -f 'parser.cpp'; then $(CYGPATH_W) 'parser.cpp'; else $(CYGPATH_W) '$(srcdir)/parser.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/parsargv.cpp ++++ raidutils-0.0.6/raidutil/parsargv.cpp +@@ -40,9 +40,12 @@ + ctor to construct that. + * Version Control: + * +-* $Revision: 6 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:12 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-parserr.o: parserr.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parserr.o -MD -MP -MF "$(DEPDIR)/raidutil-parserr.Tpo" -c -o raidutil-parserr.o `test -f 'parserr.cpp' || echo '$(srcdir)/'`parserr.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parserr.Tpo" "$(DEPDIR)/raidutil-parserr.Po"; else rm -f "$(DEPDIR)/raidutil-parserr.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parserr.o -MD -MP -MF $(DEPDIR)/raidutil-parserr.Tpo -c -o raidutil-parserr.o `test -f 'parserr.cpp' || echo '$(srcdir)/'`parserr.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parserr.Tpo $(DEPDIR)/raidutil-parserr.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parserr.cpp' object='raidutil-parserr.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parserr.o `test -f 'parserr.cpp' || echo '$(srcdir)/'`parserr.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/scsilist.hpp ++++ raidutils-0.0.6/raidutil/scsilist.hpp +@@ -42,9 +42,12 @@ + addresses. + * Version Control: + * +-* $Revision: 7 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:11 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-parserr.obj: parserr.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parserr.obj -MD -MP -MF "$(DEPDIR)/raidutil-parserr.Tpo" -c -o raidutil-parserr.obj `if test -f 'parserr.cpp'; then $(CYGPATH_W) 'parserr.cpp'; else $(CYGPATH_W) '$(srcdir)/parserr.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parserr.Tpo" "$(DEPDIR)/raidutil-parserr.Po"; else rm -f "$(DEPDIR)/raidutil-parserr.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parserr.obj -MD -MP -MF $(DEPDIR)/raidutil-parserr.Tpo -c -o raidutil-parserr.obj `if test -f 'parserr.cpp'; then $(CYGPATH_W) 'parserr.cpp'; else $(CYGPATH_W) '$(srcdir)/parserr.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parserr.Tpo $(DEPDIR)/raidutil-parserr.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parserr.cpp' object='raidutil-parserr.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parserr.obj `if test -f 'parserr.cpp'; then $(CYGPATH_W) 'parserr.cpp'; else $(CYGPATH_W) '$(srcdir)/parserr.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/forcest.cpp ++++ raidutils-0.0.6/raidutil/forcest.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 10 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:11 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-raidutil.o: raidutil.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-raidutil.o -MD -MP -MF "$(DEPDIR)/raidutil-raidutil.Tpo" -c -o raidutil-raidutil.o `test -f 'raidutil.cpp' || echo '$(srcdir)/'`raidutil.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-raidutil.Tpo" "$(DEPDIR)/raidutil-raidutil.Po"; else rm -f "$(DEPDIR)/raidutil-raidutil.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-raidutil.o -MD -MP -MF $(DEPDIR)/raidutil-raidutil.Tpo -c -o raidutil-raidutil.o `test -f 'raidutil.cpp' || echo '$(srcdir)/'`raidutil.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-raidutil.Tpo $(DEPDIR)/raidutil-raidutil.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='raidutil.cpp' object='raidutil-raidutil.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-raidutil.o `test -f 'raidutil.cpp' || echo '$(srcdir)/'`raidutil.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/alarm.hpp ++++ raidutils-0.0.6/raidutil/alarm.hpp +@@ -41,9 +41,12 @@ + * Description: + * Version Control: + * +-* $Revision: 2 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.2 2006-03-13 03:15:15 bap ++* GCC 4.1 patch ++* + *****************************************************************************/ - raidutil-raidutil.obj: raidutil.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-raidutil.obj -MD -MP -MF "$(DEPDIR)/raidutil-raidutil.Tpo" -c -o raidutil-raidutil.obj `if test -f 'raidutil.cpp'; then $(CYGPATH_W) 'raidutil.cpp'; else $(CYGPATH_W) '$(srcdir)/raidutil.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-raidutil.Tpo" "$(DEPDIR)/raidutil-raidutil.Po"; else rm -f "$(DEPDIR)/raidutil-raidutil.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-raidutil.obj -MD -MP -MF $(DEPDIR)/raidutil-raidutil.Tpo -c -o raidutil-raidutil.obj `if test -f 'raidutil.cpp'; then $(CYGPATH_W) 'raidutil.cpp'; else $(CYGPATH_W) '$(srcdir)/raidutil.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-raidutil.Tpo $(DEPDIR)/raidutil-raidutil.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='raidutil.cpp' object='raidutil-raidutil.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-raidutil.obj `if test -f 'raidutil.cpp'; then $(CYGPATH_W) 'raidutil.cpp'; else $(CYGPATH_W) '$(srcdir)/raidutil.cpp'; fi` + /*** INCLUDES ***/ +@@ -58,7 +61,7 @@ enum AlarmCommand { None, On, Off, Enabl + class AlarmStatus:public Command + { + public: +- AlarmStatus::AlarmStatus( int hba, AlarmCommand cmd ); ++ AlarmStatus( int hba, AlarmCommand cmd ); + AlarmStatus( const AlarmStatus &new_AlarmStatus ); + virtual ~AlarmStatus(); + AlarmStatus &operator = ( AlarmStatus &right ); +--- raidutils-0.0.6.orig/raidutil/uartdmp.cpp ++++ raidutils-0.0.6/raidutil/uartdmp.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 9 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-rawdata.o: rawdata.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rawdata.o -MD -MP -MF "$(DEPDIR)/raidutil-rawdata.Tpo" -c -o raidutil-rawdata.o `test -f 'rawdata.cpp' || echo '$(srcdir)/'`rawdata.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rawdata.Tpo" "$(DEPDIR)/raidutil-rawdata.Po"; else rm -f "$(DEPDIR)/raidutil-rawdata.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rawdata.o -MD -MP -MF $(DEPDIR)/raidutil-rawdata.Tpo -c -o raidutil-rawdata.o `test -f 'rawdata.cpp' || echo '$(srcdir)/'`rawdata.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rawdata.Tpo $(DEPDIR)/raidutil-rawdata.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rawdata.cpp' object='raidutil-rawdata.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rawdata.o `test -f 'rawdata.cpp' || echo '$(srcdir)/'`rawdata.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/eventlog.cpp ++++ raidutils-0.0.6/raidutil/eventlog.cpp +@@ -38,9 +38,12 @@ + * Description: + * Version Control: + * +-* $Revision: 42 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:13 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-rawdata.obj: rawdata.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rawdata.obj -MD -MP -MF "$(DEPDIR)/raidutil-rawdata.Tpo" -c -o raidutil-rawdata.obj `if test -f 'rawdata.cpp'; then $(CYGPATH_W) 'rawdata.cpp'; else $(CYGPATH_W) '$(srcdir)/rawdata.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rawdata.Tpo" "$(DEPDIR)/raidutil-rawdata.Po"; else rm -f "$(DEPDIR)/raidutil-rawdata.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rawdata.obj -MD -MP -MF $(DEPDIR)/raidutil-rawdata.Tpo -c -o raidutil-rawdata.obj `if test -f 'rawdata.cpp'; then $(CYGPATH_W) 'rawdata.cpp'; else $(CYGPATH_W) '$(srcdir)/rawdata.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rawdata.Tpo $(DEPDIR)/raidutil-rawdata.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rawdata.cpp' object='raidutil-rawdata.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rawdata.obj `if test -f 'rawdata.cpp'; then $(CYGPATH_W) 'rawdata.cpp'; else $(CYGPATH_W) '$(srcdir)/rawdata.cpp'; fi` + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/raidutil.cpp ++++ raidutils-0.0.6/raidutil/raidutil.cpp +@@ -39,9 +39,12 @@ + * Description: + * Version Control: + * +-* $Revision: 123 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-rdutlosd.o: rdutlosd.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rdutlosd.o -MD -MP -MF "$(DEPDIR)/raidutil-rdutlosd.Tpo" -c -o raidutil-rdutlosd.o `test -f 'rdutlosd.cpp' || echo '$(srcdir)/'`rdutlosd.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rdutlosd.Tpo" "$(DEPDIR)/raidutil-rdutlosd.Po"; else rm -f "$(DEPDIR)/raidutil-rdutlosd.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rdutlosd.o -MD -MP -MF $(DEPDIR)/raidutil-rdutlosd.Tpo -c -o raidutil-rdutlosd.o `test -f 'rdutlosd.cpp' || echo '$(srcdir)/'`rdutlosd.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rdutlosd.Tpo $(DEPDIR)/raidutil-rdutlosd.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rdutlosd.cpp' object='raidutil-rdutlosd.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rdutlosd.o `test -f 'rdutlosd.cpp' || echo '$(srcdir)/'`rdutlosd.cpp + /*** INCLUDES ***/ +@@ -368,7 +371,7 @@ void Flush ( String_List * output ) + bool pageMode = mode.GetPagenationMode(); - raidutil-rdutlosd.obj: rdutlosd.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rdutlosd.obj -MD -MP -MF "$(DEPDIR)/raidutil-rdutlosd.Tpo" -c -o raidutil-rdutlosd.obj `if test -f 'rdutlosd.cpp'; then $(CYGPATH_W) 'rdutlosd.cpp'; else $(CYGPATH_W) '$(srcdir)/rdutlosd.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rdutlosd.Tpo" "$(DEPDIR)/raidutil-rdutlosd.Po"; else rm -f "$(DEPDIR)/raidutil-rdutlosd.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rdutlosd.obj -MD -MP -MF $(DEPDIR)/raidutil-rdutlosd.Tpo -c -o raidutil-rdutlosd.obj `if test -f 'rdutlosd.cpp'; then $(CYGPATH_W) 'rdutlosd.cpp'; else $(CYGPATH_W) '$(srcdir)/rdutlosd.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rdutlosd.Tpo $(DEPDIR)/raidutil-rdutlosd.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rdutlosd.cpp' object='raidutil-rdutlosd.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rdutlosd.obj `if test -f 'rdutlosd.cpp'; then $(CYGPATH_W) 'rdutlosd.cpp'; else $(CYGPATH_W) '$(srcdir)/rdutlosd.cpp'; fi` + // loop through the items in this command and display them +- while( out_Str = output->get_Next_Item() ) ++ while( (out_Str = output->get_Next_Item()) ) + { + char temp_Buf[ 512 ]; + char stripped_Str[ 160 ]; +--- raidutils-0.0.6.orig/raidutil/quietmod.hpp ++++ raidutils-0.0.6/raidutil/quietmod.hpp +@@ -41,9 +41,12 @@ + * Description: This toggles quiet mode on and off. + * Version Control: + * +-* $Revision: 5 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:20:15 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ - raidutil-rmwflash.o: rmwflash.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rmwflash.o -MD -MP -MF "$(DEPDIR)/raidutil-rmwflash.Tpo" -c -o raidutil-rmwflash.o `test -f 'rmwflash.cpp' || echo '$(srcdir)/'`rmwflash.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rmwflash.Tpo" "$(DEPDIR)/raidutil-rmwflash.Po"; else rm -f "$(DEPDIR)/raidutil-rmwflash.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rmwflash.o -MD -MP -MF $(DEPDIR)/raidutil-rmwflash.Tpo -c -o raidutil-rmwflash.o `test -f 'rmwflash.cpp' || echo '$(srcdir)/'`rmwflash.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rmwflash.Tpo $(DEPDIR)/raidutil-rmwflash.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rmwflash.cpp' object='raidutil-rmwflash.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rmwflash.o `test -f 'rmwflash.cpp' || echo '$(srcdir)/'`rmwflash.cpp + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/raidutil/Makefile.in ++++ raidutils-0.0.6/raidutil/Makefile.in +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.9.2 from Makefile.am. ++# Makefile.in generated by automake 1.11.1 from Makefile.am. + # @configure_input@ - raidutil-rmwflash.obj: rmwflash.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rmwflash.obj -MD -MP -MF "$(DEPDIR)/raidutil-rmwflash.Tpo" -c -o raidutil-rmwflash.obj `if test -f 'rmwflash.cpp'; then $(CYGPATH_W) 'rmwflash.cpp'; else $(CYGPATH_W) '$(srcdir)/rmwflash.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rmwflash.Tpo" "$(DEPDIR)/raidutil-rmwflash.Po"; else rm -f "$(DEPDIR)/raidutil-rmwflash.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rmwflash.obj -MD -MP -MF $(DEPDIR)/raidutil-rmwflash.Tpo -c -o raidutil-rmwflash.obj `if test -f 'rmwflash.cpp'; then $(CYGPATH_W) 'rmwflash.cpp'; else $(CYGPATH_W) '$(srcdir)/rmwflash.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rmwflash.Tpo $(DEPDIR)/raidutil-rmwflash.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rmwflash.cpp' object='raidutil-rmwflash.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rmwflash.obj `if test -f 'rmwflash.cpp'; then $(CYGPATH_W) 'rmwflash.cpp'; else $(CYGPATH_W) '$(srcdir)/rmwflash.cpp'; fi` + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,17 +15,12 @@ - raidutil-rstnvram.o: rstnvram.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rstnvram.o -MD -MP -MF "$(DEPDIR)/raidutil-rstnvram.Tpo" -c -o raidutil-rstnvram.o `test -f 'rstnvram.cpp' || echo '$(srcdir)/'`rstnvram.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rstnvram.Tpo" "$(DEPDIR)/raidutil-rstnvram.Po"; else rm -f "$(DEPDIR)/raidutil-rstnvram.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rstnvram.o -MD -MP -MF $(DEPDIR)/raidutil-rstnvram.Tpo -c -o raidutil-rstnvram.o `test -f 'rstnvram.cpp' || echo '$(srcdir)/'`rstnvram.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rstnvram.Tpo $(DEPDIR)/raidutil-rstnvram.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rstnvram.cpp' object='raidutil-rstnvram.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rstnvram.o `test -f 'rstnvram.cpp' || echo '$(srcdir)/'`rstnvram.cpp + @SET_MAKE@ - raidutil-rstnvram.obj: rstnvram.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rstnvram.obj -MD -MP -MF "$(DEPDIR)/raidutil-rstnvram.Tpo" -c -o raidutil-rstnvram.obj `if test -f 'rstnvram.cpp'; then $(CYGPATH_W) 'rstnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/rstnvram.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rstnvram.Tpo" "$(DEPDIR)/raidutil-rstnvram.Po"; else rm -f "$(DEPDIR)/raidutil-rstnvram.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rstnvram.obj -MD -MP -MF $(DEPDIR)/raidutil-rstnvram.Tpo -c -o raidutil-rstnvram.obj `if test -f 'rstnvram.cpp'; then $(CYGPATH_W) 'rstnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/rstnvram.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rstnvram.Tpo $(DEPDIR)/raidutil-rstnvram.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rstnvram.cpp' object='raidutil-rstnvram.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rstnvram.obj `if test -f 'rstnvram.cpp'; then $(CYGPATH_W) 'rstnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/rstnvram.cpp'; fi` +-SOURCES = $(raidutil_SOURCES) +- +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +-top_builddir = .. ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +-INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -38,7 +34,7 @@ PRE_UNINSTALL = : + POST_UNINSTALL = : + build_triplet = @build@ + host_triplet = @host@ +-bin_PROGRAMS = raidutil$(EXEEXT) ++sbin_PROGRAMS = raidutil$(EXEEXT) + subdir = raidutil + DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +@@ -48,9 +44,9 @@ am__configure_deps = $(am__aclocal_m4_de + mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = +-am__installdirs = "$(DESTDIR)$(bindir)" +-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) +-PROGRAMS = $(bin_PROGRAMS) ++CONFIG_CLEAN_VPATH_FILES = ++am__installdirs = "$(DESTDIR)$(sbindir)" ++PROGRAMS = $(sbin_PROGRAMS) + am_raidutil_OBJECTS = raidutil-alarm.$(OBJEXT) \ + raidutil-bufiolsb.$(OBJEXT) raidutil-cmdlist.$(OBJEXT) \ + raidutil-command.$(OBJEXT) raidutil-config.$(OBJEXT) \ +@@ -76,33 +72,34 @@ am_raidutil_OBJECTS = raidutil-alarm.$(O + raidutil-swap_em.$(OBJEXT) + raidutil_OBJECTS = $(am_raidutil_OBJECTS) + raidutil_DEPENDENCIES = ../lib/libraidutil.la +-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) ++DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ +- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ +- $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ ++ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +- $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ ++ $(LDFLAGS) -o $@ + CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +-LTCXXCOMPILE = $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) \ +- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ +- $(AM_CXXFLAGS) $(CXXFLAGS) ++LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ ++ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) + CXXLD = $(CXX) +-CXXLINK = $(LIBTOOL) --mode=link --tag=CXX $(CXXLD) $(AM_CXXFLAGS) \ +- $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ ++ $(LDFLAGS) -o $@ + SOURCES = $(raidutil_SOURCES) + DIST_SOURCES = $(raidutil_SOURCES) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ +-AMDEP_FALSE = @AMDEP_FALSE@ +-AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -121,48 +118,57 @@ CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ ++MKDIR_P = @MKDIR_P@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ ++OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ ++SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ +-ac_ct_AR = @ac_ct_AR@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ +-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -174,28 +180,41 @@ build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ ++builddir = @builddir@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ ++top_build_prefix = @top_build_prefix@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ + raidutil_SOURCES = alarm.cpp bufiolsb.c cmdlist.cpp command.cpp config.cpp creatrad.cpp deletrad.cpp dynsize.cpp engiface.cpp eventlog.cpp expand.cpp flash.cpp flashmem.cpp forcest.cpp id_list.cpp intlist.cpp listdev.cpp lzssdon.cpp lzstrbuf.cpp modnvram.cpp namarray.cpp nvrambit.cpp parsargv.cpp parser.cpp parserr.cpp raidutil.cpp rawdata.cpp rdutlosd.cpp rmwflash.cpp rstnvram.cpp scsilist.cpp setcache.cpp setrate.cpp setspeed.cpp showinq.cpp status.cpp strlist.cpp taskctrl.cpp uartdmp.cpp usage.cpp zap.cpp setscfg.cpp segment.cpp swap_em.c + raidutil_CPPFLAGS = -O3 -DMESSAGES -D_DPT_ACTIVE_ALIGNMENT -Dtrue=1 -Dfalse=0 -DHORIZONTAL -DNEW_RSC_MGR -DNEW_RSC_HDR -D_DPT_FLASH -I../include + raidutil_LDADD = ../lib/libraidutil.la +@@ -207,14 +226,14 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefi + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +- && exit 0; \ ++ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ ++ && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu raidutil/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu raidutil/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu raidutil/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu raidutil/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -232,37 +251,53 @@ $(top_srcdir)/configure: $(am__configur + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +-install-binPROGRAMS: $(bin_PROGRAMS) ++$(am__aclocal_m4_deps): ++install-sbinPROGRAMS: $(sbin_PROGRAMS) + @$(NORMAL_INSTALL) +- test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" +- @list='$(bin_PROGRAMS)'; for p in $$list; do \ +- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- if test -f $$p \ +- || test -f $$p1 \ +- ; then \ +- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ +- else :; fi; \ +- done ++ test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" ++ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed 's/$(EXEEXT)$$//' | \ ++ while read p p1; do if test -f $$p || test -f $$p1; \ ++ then echo "$$p"; echo "$$p"; else :; fi; \ ++ done | \ ++ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ ++ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ ++ sed 'N;N;N;s,\n, ,g' | \ ++ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ ++ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ ++ if ($$2 == $$4) files[d] = files[d] " " $$1; \ ++ else { print "f", $$3 "/" $$4, $$1; } } \ ++ END { for (d in files) print "f", d, files[d] }' | \ ++ while read type dir files; do \ ++ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ ++ test -z "$$files" || { \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ ++ } \ ++ ; done - raidutil-scsilist.o: scsilist.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-scsilist.o -MD -MP -MF "$(DEPDIR)/raidutil-scsilist.Tpo" -c -o raidutil-scsilist.o `test -f 'scsilist.cpp' || echo '$(srcdir)/'`scsilist.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-scsilist.Tpo" "$(DEPDIR)/raidutil-scsilist.Po"; else rm -f "$(DEPDIR)/raidutil-scsilist.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-scsilist.o -MD -MP -MF $(DEPDIR)/raidutil-scsilist.Tpo -c -o raidutil-scsilist.o `test -f 'scsilist.cpp' || echo '$(srcdir)/'`scsilist.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-scsilist.Tpo $(DEPDIR)/raidutil-scsilist.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='scsilist.cpp' object='raidutil-scsilist.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-scsilist.o `test -f 'scsilist.cpp' || echo '$(srcdir)/'`scsilist.cpp +-uninstall-binPROGRAMS: ++uninstall-sbinPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(bin_PROGRAMS)'; for p in $$list; do \ +- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ +- echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ +- rm -f "$(DESTDIR)$(bindir)/$$f"; \ +- done +- +-clean-binPROGRAMS: +- @list='$(bin_PROGRAMS)'; for p in $$list; do \ +- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f $$p $$f"; \ +- rm -f $$p $$f ; \ +- done ++ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ ++ files=`for p in $$list; do echo "$$p"; done | \ ++ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ ++ -e 's/$$/$(EXEEXT)/' `; \ ++ test -n "$$list" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(sbindir)" && rm -f $$files ++ ++clean-sbinPROGRAMS: ++ @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list || exit $$?; \ ++ test -n "$(EXEEXT)" || exit 0; \ ++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f" $$list; \ ++ rm -f $$list + raidutil$(EXEEXT): $(raidutil_OBJECTS) $(raidutil_DEPENDENCIES) + @rm -f raidutil$(EXEEXT) +- $(CXXLINK) $(raidutil_LDFLAGS) $(raidutil_OBJECTS) $(raidutil_LDADD) $(LIBS) ++ $(CXXLINK) $(raidutil_OBJECTS) $(raidutil_LDADD) $(LIBS) - raidutil-scsilist.obj: scsilist.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-scsilist.obj -MD -MP -MF "$(DEPDIR)/raidutil-scsilist.Tpo" -c -o raidutil-scsilist.obj `if test -f 'scsilist.cpp'; then $(CYGPATH_W) 'scsilist.cpp'; else $(CYGPATH_W) '$(srcdir)/scsilist.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-scsilist.Tpo" "$(DEPDIR)/raidutil-scsilist.Po"; else rm -f "$(DEPDIR)/raidutil-scsilist.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-scsilist.obj -MD -MP -MF $(DEPDIR)/raidutil-scsilist.Tpo -c -o raidutil-scsilist.obj `if test -f 'scsilist.cpp'; then $(CYGPATH_W) 'scsilist.cpp'; else $(CYGPATH_W) '$(srcdir)/scsilist.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-scsilist.Tpo $(DEPDIR)/raidutil-scsilist.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='scsilist.cpp' object='raidutil-scsilist.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-scsilist.obj `if test -f 'scsilist.cpp'; then $(CYGPATH_W) 'scsilist.cpp'; else $(CYGPATH_W) '$(srcdir)/scsilist.cpp'; fi` + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -316,659 +351,659 @@ distclean-compile: + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/raidutil-zap.Po@am__quote@ - raidutil-setcache.o: setcache.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setcache.o -MD -MP -MF "$(DEPDIR)/raidutil-setcache.Tpo" -c -o raidutil-setcache.o `test -f 'setcache.cpp' || echo '$(srcdir)/'`setcache.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setcache.Tpo" "$(DEPDIR)/raidutil-setcache.Po"; else rm -f "$(DEPDIR)/raidutil-setcache.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setcache.o -MD -MP -MF $(DEPDIR)/raidutil-setcache.Tpo -c -o raidutil-setcache.o `test -f 'setcache.cpp' || echo '$(srcdir)/'`setcache.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setcache.Tpo $(DEPDIR)/raidutil-setcache.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setcache.cpp' object='raidutil-setcache.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setcache.o `test -f 'setcache.cpp' || echo '$(srcdir)/'`setcache.cpp + .c.o: +-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< - raidutil-setcache.obj: setcache.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setcache.obj -MD -MP -MF "$(DEPDIR)/raidutil-setcache.Tpo" -c -o raidutil-setcache.obj `if test -f 'setcache.cpp'; then $(CYGPATH_W) 'setcache.cpp'; else $(CYGPATH_W) '$(srcdir)/setcache.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setcache.Tpo" "$(DEPDIR)/raidutil-setcache.Po"; else rm -f "$(DEPDIR)/raidutil-setcache.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setcache.obj -MD -MP -MF $(DEPDIR)/raidutil-setcache.Tpo -c -o raidutil-setcache.obj `if test -f 'setcache.cpp'; then $(CYGPATH_W) 'setcache.cpp'; else $(CYGPATH_W) '$(srcdir)/setcache.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setcache.Tpo $(DEPDIR)/raidutil-setcache.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setcache.cpp' object='raidutil-setcache.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setcache.obj `if test -f 'setcache.cpp'; then $(CYGPATH_W) 'setcache.cpp'; else $(CYGPATH_W) '$(srcdir)/setcache.cpp'; fi` + .c.obj: +-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - raidutil-setrate.o: setrate.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setrate.o -MD -MP -MF "$(DEPDIR)/raidutil-setrate.Tpo" -c -o raidutil-setrate.o `test -f 'setrate.cpp' || echo '$(srcdir)/'`setrate.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setrate.Tpo" "$(DEPDIR)/raidutil-setrate.Po"; else rm -f "$(DEPDIR)/raidutil-setrate.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setrate.o -MD -MP -MF $(DEPDIR)/raidutil-setrate.Tpo -c -o raidutil-setrate.o `test -f 'setrate.cpp' || echo '$(srcdir)/'`setrate.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setrate.Tpo $(DEPDIR)/raidutil-setrate.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setrate.cpp' object='raidutil-setrate.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setrate.o `test -f 'setrate.cpp' || echo '$(srcdir)/'`setrate.cpp + .c.lo: +-@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< - raidutil-setrate.obj: setrate.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setrate.obj -MD -MP -MF "$(DEPDIR)/raidutil-setrate.Tpo" -c -o raidutil-setrate.obj `if test -f 'setrate.cpp'; then $(CYGPATH_W) 'setrate.cpp'; else $(CYGPATH_W) '$(srcdir)/setrate.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setrate.Tpo" "$(DEPDIR)/raidutil-setrate.Po"; else rm -f "$(DEPDIR)/raidutil-setrate.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setrate.obj -MD -MP -MF $(DEPDIR)/raidutil-setrate.Tpo -c -o raidutil-setrate.obj `if test -f 'setrate.cpp'; then $(CYGPATH_W) 'setrate.cpp'; else $(CYGPATH_W) '$(srcdir)/setrate.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setrate.Tpo $(DEPDIR)/raidutil-setrate.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setrate.cpp' object='raidutil-setrate.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setrate.obj `if test -f 'setrate.cpp'; then $(CYGPATH_W) 'setrate.cpp'; else $(CYGPATH_W) '$(srcdir)/setrate.cpp'; fi` + raidutil-bufiolsb.o: bufiolsb.c +-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-bufiolsb.o -MD -MP -MF "$(DEPDIR)/raidutil-bufiolsb.Tpo" -c -o raidutil-bufiolsb.o `test -f 'bufiolsb.c' || echo '$(srcdir)/'`bufiolsb.c; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/raidutil-bufiolsb.Tpo" "$(DEPDIR)/raidutil-bufiolsb.Po"; else rm -f "$(DEPDIR)/raidutil-bufiolsb.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-bufiolsb.o -MD -MP -MF $(DEPDIR)/raidutil-bufiolsb.Tpo -c -o raidutil-bufiolsb.o `test -f 'bufiolsb.c' || echo '$(srcdir)/'`bufiolsb.c ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/raidutil-bufiolsb.Tpo $(DEPDIR)/raidutil-bufiolsb.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bufiolsb.c' object='raidutil-bufiolsb.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o raidutil-bufiolsb.o `test -f 'bufiolsb.c' || echo '$(srcdir)/'`bufiolsb.c - raidutil-setspeed.o: setspeed.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setspeed.o -MD -MP -MF "$(DEPDIR)/raidutil-setspeed.Tpo" -c -o raidutil-setspeed.o `test -f 'setspeed.cpp' || echo '$(srcdir)/'`setspeed.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setspeed.Tpo" "$(DEPDIR)/raidutil-setspeed.Po"; else rm -f "$(DEPDIR)/raidutil-setspeed.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setspeed.o -MD -MP -MF $(DEPDIR)/raidutil-setspeed.Tpo -c -o raidutil-setspeed.o `test -f 'setspeed.cpp' || echo '$(srcdir)/'`setspeed.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setspeed.Tpo $(DEPDIR)/raidutil-setspeed.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setspeed.cpp' object='raidutil-setspeed.o' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setspeed.o `test -f 'setspeed.cpp' || echo '$(srcdir)/'`setspeed.cpp + raidutil-bufiolsb.obj: bufiolsb.c +-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-bufiolsb.obj -MD -MP -MF "$(DEPDIR)/raidutil-bufiolsb.Tpo" -c -o raidutil-bufiolsb.obj `if test -f 'bufiolsb.c'; then $(CYGPATH_W) 'bufiolsb.c'; else $(CYGPATH_W) '$(srcdir)/bufiolsb.c'; fi`; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/raidutil-bufiolsb.Tpo" "$(DEPDIR)/raidutil-bufiolsb.Po"; else rm -f "$(DEPDIR)/raidutil-bufiolsb.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-bufiolsb.obj -MD -MP -MF $(DEPDIR)/raidutil-bufiolsb.Tpo -c -o raidutil-bufiolsb.obj `if test -f 'bufiolsb.c'; then $(CYGPATH_W) 'bufiolsb.c'; else $(CYGPATH_W) '$(srcdir)/bufiolsb.c'; fi` ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/raidutil-bufiolsb.Tpo $(DEPDIR)/raidutil-bufiolsb.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bufiolsb.c' object='raidutil-bufiolsb.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o raidutil-bufiolsb.obj `if test -f 'bufiolsb.c'; then $(CYGPATH_W) 'bufiolsb.c'; else $(CYGPATH_W) '$(srcdir)/bufiolsb.c'; fi` + + raidutil-swap_em.o: swap_em.c +-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-swap_em.o -MD -MP -MF "$(DEPDIR)/raidutil-swap_em.Tpo" -c -o raidutil-swap_em.o `test -f 'swap_em.c' || echo '$(srcdir)/'`swap_em.c; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/raidutil-swap_em.Tpo" "$(DEPDIR)/raidutil-swap_em.Po"; else rm -f "$(DEPDIR)/raidutil-swap_em.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-swap_em.o -MD -MP -MF $(DEPDIR)/raidutil-swap_em.Tpo -c -o raidutil-swap_em.o `test -f 'swap_em.c' || echo '$(srcdir)/'`swap_em.c ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/raidutil-swap_em.Tpo $(DEPDIR)/raidutil-swap_em.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='swap_em.c' object='raidutil-swap_em.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o raidutil-swap_em.o `test -f 'swap_em.c' || echo '$(srcdir)/'`swap_em.c - raidutil-setspeed.obj: setspeed.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setspeed.obj -MD -MP -MF "$(DEPDIR)/raidutil-setspeed.Tpo" -c -o raidutil-setspeed.obj `if test -f 'setspeed.cpp'; then $(CYGPATH_W) 'setspeed.cpp'; else $(CYGPATH_W) '$(srcdir)/setspeed.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setspeed.Tpo" "$(DEPDIR)/raidutil-setspeed.Po"; else rm -f "$(DEPDIR)/raidutil-setspeed.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setspeed.obj -MD -MP -MF $(DEPDIR)/raidutil-setspeed.Tpo -c -o raidutil-setspeed.obj `if test -f 'setspeed.cpp'; then $(CYGPATH_W) 'setspeed.cpp'; else $(CYGPATH_W) '$(srcdir)/setspeed.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setspeed.Tpo $(DEPDIR)/raidutil-setspeed.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setspeed.cpp' object='raidutil-setspeed.obj' libtool=no @AMDEPBACKSLASH@ - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setspeed.obj `if test -f 'setspeed.cpp'; then $(CYGPATH_W) 'setspeed.cpp'; else $(CYGPATH_W) '$(srcdir)/setspeed.cpp'; fi` + raidutil-swap_em.obj: swap_em.c +-@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-swap_em.obj -MD -MP -MF "$(DEPDIR)/raidutil-swap_em.Tpo" -c -o raidutil-swap_em.obj `if test -f 'swap_em.c'; then $(CYGPATH_W) 'swap_em.c'; else $(CYGPATH_W) '$(srcdir)/swap_em.c'; fi`; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/raidutil-swap_em.Tpo" "$(DEPDIR)/raidutil-swap_em.Po"; else rm -f "$(DEPDIR)/raidutil-swap_em.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT raidutil-swap_em.obj -MD -MP -MF $(DEPDIR)/raidutil-swap_em.Tpo -c -o raidutil-swap_em.obj `if test -f 'swap_em.c'; then $(CYGPATH_W) 'swap_em.c'; else $(CYGPATH_W) '$(srcdir)/swap_em.c'; fi` ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/raidutil-swap_em.Tpo $(DEPDIR)/raidutil-swap_em.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='swap_em.c' object='raidutil-swap_em.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o raidutil-swap_em.obj `if test -f 'swap_em.c'; then $(CYGPATH_W) 'swap_em.c'; else $(CYGPATH_W) '$(srcdir)/swap_em.c'; fi` - raidutil-showinq.o: showinq.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-showinq.o -MD -MP -MF "$(DEPDIR)/raidutil-showinq.Tpo" -c -o raidutil-showinq.o `test -f 'showinq.cpp' || echo '$(srcdir)/'`showinq.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-showinq.Tpo" "$(DEPDIR)/raidutil-showinq.Po"; else rm -f "$(DEPDIR)/raidutil-showinq.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-showinq.o -MD -MP -MF $(DEPDIR)/raidutil-showinq.Tpo -c -o raidutil-showinq.o `test -f 'showinq.cpp' || echo '$(srcdir)/'`showinq.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-showinq.Tpo $(DEPDIR)/raidutil-showinq.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='showinq.cpp' object='raidutil-showinq.o' libtool=no @AMDEPBACKSLASH@ + .cpp.o: +-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-showinq.o `test -f 'showinq.cpp' || echo '$(srcdir)/'`showinq.cpp + @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< - raidutil-showinq.obj: showinq.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-showinq.obj -MD -MP -MF "$(DEPDIR)/raidutil-showinq.Tpo" -c -o raidutil-showinq.obj `if test -f 'showinq.cpp'; then $(CYGPATH_W) 'showinq.cpp'; else $(CYGPATH_W) '$(srcdir)/showinq.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-showinq.Tpo" "$(DEPDIR)/raidutil-showinq.Po"; else rm -f "$(DEPDIR)/raidutil-showinq.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-showinq.obj -MD -MP -MF $(DEPDIR)/raidutil-showinq.Tpo -c -o raidutil-showinq.obj `if test -f 'showinq.cpp'; then $(CYGPATH_W) 'showinq.cpp'; else $(CYGPATH_W) '$(srcdir)/showinq.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-showinq.Tpo $(DEPDIR)/raidutil-showinq.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='showinq.cpp' object='raidutil-showinq.obj' libtool=no @AMDEPBACKSLASH@ + .cpp.obj: +-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-showinq.obj `if test -f 'showinq.cpp'; then $(CYGPATH_W) 'showinq.cpp'; else $(CYGPATH_W) '$(srcdir)/showinq.cpp'; fi` + @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - raidutil-status.o: status.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-status.o -MD -MP -MF "$(DEPDIR)/raidutil-status.Tpo" -c -o raidutil-status.o `test -f 'status.cpp' || echo '$(srcdir)/'`status.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-status.Tpo" "$(DEPDIR)/raidutil-status.Po"; else rm -f "$(DEPDIR)/raidutil-status.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-status.o -MD -MP -MF $(DEPDIR)/raidutil-status.Tpo -c -o raidutil-status.o `test -f 'status.cpp' || echo '$(srcdir)/'`status.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-status.Tpo $(DEPDIR)/raidutil-status.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='status.cpp' object='raidutil-status.o' libtool=no @AMDEPBACKSLASH@ + .cpp.lo: +-@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-status.o `test -f 'status.cpp' || echo '$(srcdir)/'`status.cpp + @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< - raidutil-status.obj: status.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-status.obj -MD -MP -MF "$(DEPDIR)/raidutil-status.Tpo" -c -o raidutil-status.obj `if test -f 'status.cpp'; then $(CYGPATH_W) 'status.cpp'; else $(CYGPATH_W) '$(srcdir)/status.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-status.Tpo" "$(DEPDIR)/raidutil-status.Po"; else rm -f "$(DEPDIR)/raidutil-status.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-status.obj -MD -MP -MF $(DEPDIR)/raidutil-status.Tpo -c -o raidutil-status.obj `if test -f 'status.cpp'; then $(CYGPATH_W) 'status.cpp'; else $(CYGPATH_W) '$(srcdir)/status.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-status.Tpo $(DEPDIR)/raidutil-status.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='status.cpp' object='raidutil-status.obj' libtool=no @AMDEPBACKSLASH@ + raidutil-alarm.o: alarm.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-alarm.o -MD -MP -MF "$(DEPDIR)/raidutil-alarm.Tpo" -c -o raidutil-alarm.o `test -f 'alarm.cpp' || echo '$(srcdir)/'`alarm.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-alarm.Tpo" "$(DEPDIR)/raidutil-alarm.Po"; else rm -f "$(DEPDIR)/raidutil-alarm.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-alarm.o -MD -MP -MF $(DEPDIR)/raidutil-alarm.Tpo -c -o raidutil-alarm.o `test -f 'alarm.cpp' || echo '$(srcdir)/'`alarm.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-alarm.Tpo $(DEPDIR)/raidutil-alarm.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='alarm.cpp' object='raidutil-alarm.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-status.obj `if test -f 'status.cpp'; then $(CYGPATH_W) 'status.cpp'; else $(CYGPATH_W) '$(srcdir)/status.cpp'; fi` + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-alarm.o `test -f 'alarm.cpp' || echo '$(srcdir)/'`alarm.cpp - raidutil-strlist.o: strlist.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-strlist.o -MD -MP -MF "$(DEPDIR)/raidutil-strlist.Tpo" -c -o raidutil-strlist.o `test -f 'strlist.cpp' || echo '$(srcdir)/'`strlist.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-strlist.Tpo" "$(DEPDIR)/raidutil-strlist.Po"; else rm -f "$(DEPDIR)/raidutil-strlist.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-strlist.o -MD -MP -MF $(DEPDIR)/raidutil-strlist.Tpo -c -o raidutil-strlist.o `test -f 'strlist.cpp' || echo '$(srcdir)/'`strlist.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-strlist.Tpo $(DEPDIR)/raidutil-strlist.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strlist.cpp' object='raidutil-strlist.o' libtool=no @AMDEPBACKSLASH@ + raidutil-alarm.obj: alarm.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-alarm.obj -MD -MP -MF "$(DEPDIR)/raidutil-alarm.Tpo" -c -o raidutil-alarm.obj `if test -f 'alarm.cpp'; then $(CYGPATH_W) 'alarm.cpp'; else $(CYGPATH_W) '$(srcdir)/alarm.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-alarm.Tpo" "$(DEPDIR)/raidutil-alarm.Po"; else rm -f "$(DEPDIR)/raidutil-alarm.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-alarm.obj -MD -MP -MF $(DEPDIR)/raidutil-alarm.Tpo -c -o raidutil-alarm.obj `if test -f 'alarm.cpp'; then $(CYGPATH_W) 'alarm.cpp'; else $(CYGPATH_W) '$(srcdir)/alarm.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-alarm.Tpo $(DEPDIR)/raidutil-alarm.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='alarm.cpp' object='raidutil-alarm.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-strlist.o `test -f 'strlist.cpp' || echo '$(srcdir)/'`strlist.cpp + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-alarm.obj `if test -f 'alarm.cpp'; then $(CYGPATH_W) 'alarm.cpp'; else $(CYGPATH_W) '$(srcdir)/alarm.cpp'; fi` - raidutil-strlist.obj: strlist.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-strlist.obj -MD -MP -MF "$(DEPDIR)/raidutil-strlist.Tpo" -c -o raidutil-strlist.obj `if test -f 'strlist.cpp'; then $(CYGPATH_W) 'strlist.cpp'; else $(CYGPATH_W) '$(srcdir)/strlist.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-strlist.Tpo" "$(DEPDIR)/raidutil-strlist.Po"; else rm -f "$(DEPDIR)/raidutil-strlist.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-strlist.obj -MD -MP -MF $(DEPDIR)/raidutil-strlist.Tpo -c -o raidutil-strlist.obj `if test -f 'strlist.cpp'; then $(CYGPATH_W) 'strlist.cpp'; else $(CYGPATH_W) '$(srcdir)/strlist.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-strlist.Tpo $(DEPDIR)/raidutil-strlist.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strlist.cpp' object='raidutil-strlist.obj' libtool=no @AMDEPBACKSLASH@ + raidutil-cmdlist.o: cmdlist.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-cmdlist.o -MD -MP -MF "$(DEPDIR)/raidutil-cmdlist.Tpo" -c -o raidutil-cmdlist.o `test -f 'cmdlist.cpp' || echo '$(srcdir)/'`cmdlist.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-cmdlist.Tpo" "$(DEPDIR)/raidutil-cmdlist.Po"; else rm -f "$(DEPDIR)/raidutil-cmdlist.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-cmdlist.o -MD -MP -MF $(DEPDIR)/raidutil-cmdlist.Tpo -c -o raidutil-cmdlist.o `test -f 'cmdlist.cpp' || echo '$(srcdir)/'`cmdlist.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-cmdlist.Tpo $(DEPDIR)/raidutil-cmdlist.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='cmdlist.cpp' object='raidutil-cmdlist.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-strlist.obj `if test -f 'strlist.cpp'; then $(CYGPATH_W) 'strlist.cpp'; else $(CYGPATH_W) '$(srcdir)/strlist.cpp'; fi` + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-cmdlist.o `test -f 'cmdlist.cpp' || echo '$(srcdir)/'`cmdlist.cpp - raidutil-taskctrl.o: taskctrl.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-taskctrl.o -MD -MP -MF "$(DEPDIR)/raidutil-taskctrl.Tpo" -c -o raidutil-taskctrl.o `test -f 'taskctrl.cpp' || echo '$(srcdir)/'`taskctrl.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-taskctrl.Tpo" "$(DEPDIR)/raidutil-taskctrl.Po"; else rm -f "$(DEPDIR)/raidutil-taskctrl.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-taskctrl.o -MD -MP -MF $(DEPDIR)/raidutil-taskctrl.Tpo -c -o raidutil-taskctrl.o `test -f 'taskctrl.cpp' || echo '$(srcdir)/'`taskctrl.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-taskctrl.Tpo $(DEPDIR)/raidutil-taskctrl.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='taskctrl.cpp' object='raidutil-taskctrl.o' libtool=no @AMDEPBACKSLASH@ + raidutil-cmdlist.obj: cmdlist.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-cmdlist.obj -MD -MP -MF "$(DEPDIR)/raidutil-cmdlist.Tpo" -c -o raidutil-cmdlist.obj `if test -f 'cmdlist.cpp'; then $(CYGPATH_W) 'cmdlist.cpp'; else $(CYGPATH_W) '$(srcdir)/cmdlist.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-cmdlist.Tpo" "$(DEPDIR)/raidutil-cmdlist.Po"; else rm -f "$(DEPDIR)/raidutil-cmdlist.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-cmdlist.obj -MD -MP -MF $(DEPDIR)/raidutil-cmdlist.Tpo -c -o raidutil-cmdlist.obj `if test -f 'cmdlist.cpp'; then $(CYGPATH_W) 'cmdlist.cpp'; else $(CYGPATH_W) '$(srcdir)/cmdlist.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-cmdlist.Tpo $(DEPDIR)/raidutil-cmdlist.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='cmdlist.cpp' object='raidutil-cmdlist.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-taskctrl.o `test -f 'taskctrl.cpp' || echo '$(srcdir)/'`taskctrl.cpp + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-cmdlist.obj `if test -f 'cmdlist.cpp'; then $(CYGPATH_W) 'cmdlist.cpp'; else $(CYGPATH_W) '$(srcdir)/cmdlist.cpp'; fi` - raidutil-taskctrl.obj: taskctrl.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-taskctrl.obj -MD -MP -MF "$(DEPDIR)/raidutil-taskctrl.Tpo" -c -o raidutil-taskctrl.obj `if test -f 'taskctrl.cpp'; then $(CYGPATH_W) 'taskctrl.cpp'; else $(CYGPATH_W) '$(srcdir)/taskctrl.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-taskctrl.Tpo" "$(DEPDIR)/raidutil-taskctrl.Po"; else rm -f "$(DEPDIR)/raidutil-taskctrl.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-taskctrl.obj -MD -MP -MF $(DEPDIR)/raidutil-taskctrl.Tpo -c -o raidutil-taskctrl.obj `if test -f 'taskctrl.cpp'; then $(CYGPATH_W) 'taskctrl.cpp'; else $(CYGPATH_W) '$(srcdir)/taskctrl.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-taskctrl.Tpo $(DEPDIR)/raidutil-taskctrl.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='taskctrl.cpp' object='raidutil-taskctrl.obj' libtool=no @AMDEPBACKSLASH@ + raidutil-command.o: command.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-command.o -MD -MP -MF "$(DEPDIR)/raidutil-command.Tpo" -c -o raidutil-command.o `test -f 'command.cpp' || echo '$(srcdir)/'`command.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-command.Tpo" "$(DEPDIR)/raidutil-command.Po"; else rm -f "$(DEPDIR)/raidutil-command.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-command.o -MD -MP -MF $(DEPDIR)/raidutil-command.Tpo -c -o raidutil-command.o `test -f 'command.cpp' || echo '$(srcdir)/'`command.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-command.Tpo $(DEPDIR)/raidutil-command.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='command.cpp' object='raidutil-command.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-taskctrl.obj `if test -f 'taskctrl.cpp'; then $(CYGPATH_W) 'taskctrl.cpp'; else $(CYGPATH_W) '$(srcdir)/taskctrl.cpp'; fi` + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-command.o `test -f 'command.cpp' || echo '$(srcdir)/'`command.cpp - raidutil-uartdmp.o: uartdmp.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-uartdmp.o -MD -MP -MF "$(DEPDIR)/raidutil-uartdmp.Tpo" -c -o raidutil-uartdmp.o `test -f 'uartdmp.cpp' || echo '$(srcdir)/'`uartdmp.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-uartdmp.Tpo" "$(DEPDIR)/raidutil-uartdmp.Po"; else rm -f "$(DEPDIR)/raidutil-uartdmp.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-uartdmp.o -MD -MP -MF $(DEPDIR)/raidutil-uartdmp.Tpo -c -o raidutil-uartdmp.o `test -f 'uartdmp.cpp' || echo '$(srcdir)/'`uartdmp.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-uartdmp.Tpo $(DEPDIR)/raidutil-uartdmp.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='uartdmp.cpp' object='raidutil-uartdmp.o' libtool=no @AMDEPBACKSLASH@ + raidutil-command.obj: command.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-command.obj -MD -MP -MF "$(DEPDIR)/raidutil-command.Tpo" -c -o raidutil-command.obj `if test -f 'command.cpp'; then $(CYGPATH_W) 'command.cpp'; else $(CYGPATH_W) '$(srcdir)/command.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-command.Tpo" "$(DEPDIR)/raidutil-command.Po"; else rm -f "$(DEPDIR)/raidutil-command.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-command.obj -MD -MP -MF $(DEPDIR)/raidutil-command.Tpo -c -o raidutil-command.obj `if test -f 'command.cpp'; then $(CYGPATH_W) 'command.cpp'; else $(CYGPATH_W) '$(srcdir)/command.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-command.Tpo $(DEPDIR)/raidutil-command.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='command.cpp' object='raidutil-command.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-uartdmp.o `test -f 'uartdmp.cpp' || echo '$(srcdir)/'`uartdmp.cpp + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-command.obj `if test -f 'command.cpp'; then $(CYGPATH_W) 'command.cpp'; else $(CYGPATH_W) '$(srcdir)/command.cpp'; fi` - raidutil-uartdmp.obj: uartdmp.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-uartdmp.obj -MD -MP -MF "$(DEPDIR)/raidutil-uartdmp.Tpo" -c -o raidutil-uartdmp.obj `if test -f 'uartdmp.cpp'; then $(CYGPATH_W) 'uartdmp.cpp'; else $(CYGPATH_W) '$(srcdir)/uartdmp.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-uartdmp.Tpo" "$(DEPDIR)/raidutil-uartdmp.Po"; else rm -f "$(DEPDIR)/raidutil-uartdmp.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-uartdmp.obj -MD -MP -MF $(DEPDIR)/raidutil-uartdmp.Tpo -c -o raidutil-uartdmp.obj `if test -f 'uartdmp.cpp'; then $(CYGPATH_W) 'uartdmp.cpp'; else $(CYGPATH_W) '$(srcdir)/uartdmp.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-uartdmp.Tpo $(DEPDIR)/raidutil-uartdmp.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='uartdmp.cpp' object='raidutil-uartdmp.obj' libtool=no @AMDEPBACKSLASH@ + raidutil-config.o: config.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-config.o -MD -MP -MF "$(DEPDIR)/raidutil-config.Tpo" -c -o raidutil-config.o `test -f 'config.cpp' || echo '$(srcdir)/'`config.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-config.Tpo" "$(DEPDIR)/raidutil-config.Po"; else rm -f "$(DEPDIR)/raidutil-config.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-config.o -MD -MP -MF $(DEPDIR)/raidutil-config.Tpo -c -o raidutil-config.o `test -f 'config.cpp' || echo '$(srcdir)/'`config.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-config.Tpo $(DEPDIR)/raidutil-config.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='config.cpp' object='raidutil-config.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-uartdmp.obj `if test -f 'uartdmp.cpp'; then $(CYGPATH_W) 'uartdmp.cpp'; else $(CYGPATH_W) '$(srcdir)/uartdmp.cpp'; fi` + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-config.o `test -f 'config.cpp' || echo '$(srcdir)/'`config.cpp - raidutil-usage.o: usage.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-usage.o -MD -MP -MF "$(DEPDIR)/raidutil-usage.Tpo" -c -o raidutil-usage.o `test -f 'usage.cpp' || echo '$(srcdir)/'`usage.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-usage.Tpo" "$(DEPDIR)/raidutil-usage.Po"; else rm -f "$(DEPDIR)/raidutil-usage.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-usage.o -MD -MP -MF $(DEPDIR)/raidutil-usage.Tpo -c -o raidutil-usage.o `test -f 'usage.cpp' || echo '$(srcdir)/'`usage.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-usage.Tpo $(DEPDIR)/raidutil-usage.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='usage.cpp' object='raidutil-usage.o' libtool=no @AMDEPBACKSLASH@ + raidutil-config.obj: config.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-config.obj -MD -MP -MF "$(DEPDIR)/raidutil-config.Tpo" -c -o raidutil-config.obj `if test -f 'config.cpp'; then $(CYGPATH_W) 'config.cpp'; else $(CYGPATH_W) '$(srcdir)/config.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-config.Tpo" "$(DEPDIR)/raidutil-config.Po"; else rm -f "$(DEPDIR)/raidutil-config.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-config.obj -MD -MP -MF $(DEPDIR)/raidutil-config.Tpo -c -o raidutil-config.obj `if test -f 'config.cpp'; then $(CYGPATH_W) 'config.cpp'; else $(CYGPATH_W) '$(srcdir)/config.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-config.Tpo $(DEPDIR)/raidutil-config.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='config.cpp' object='raidutil-config.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-usage.o `test -f 'usage.cpp' || echo '$(srcdir)/'`usage.cpp + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-config.obj `if test -f 'config.cpp'; then $(CYGPATH_W) 'config.cpp'; else $(CYGPATH_W) '$(srcdir)/config.cpp'; fi` - raidutil-usage.obj: usage.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-usage.obj -MD -MP -MF "$(DEPDIR)/raidutil-usage.Tpo" -c -o raidutil-usage.obj `if test -f 'usage.cpp'; then $(CYGPATH_W) 'usage.cpp'; else $(CYGPATH_W) '$(srcdir)/usage.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-usage.Tpo" "$(DEPDIR)/raidutil-usage.Po"; else rm -f "$(DEPDIR)/raidutil-usage.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-usage.obj -MD -MP -MF $(DEPDIR)/raidutil-usage.Tpo -c -o raidutil-usage.obj `if test -f 'usage.cpp'; then $(CYGPATH_W) 'usage.cpp'; else $(CYGPATH_W) '$(srcdir)/usage.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-usage.Tpo $(DEPDIR)/raidutil-usage.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='usage.cpp' object='raidutil-usage.obj' libtool=no @AMDEPBACKSLASH@ + raidutil-creatrad.o: creatrad.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-creatrad.o -MD -MP -MF "$(DEPDIR)/raidutil-creatrad.Tpo" -c -o raidutil-creatrad.o `test -f 'creatrad.cpp' || echo '$(srcdir)/'`creatrad.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-creatrad.Tpo" "$(DEPDIR)/raidutil-creatrad.Po"; else rm -f "$(DEPDIR)/raidutil-creatrad.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-creatrad.o -MD -MP -MF $(DEPDIR)/raidutil-creatrad.Tpo -c -o raidutil-creatrad.o `test -f 'creatrad.cpp' || echo '$(srcdir)/'`creatrad.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-creatrad.Tpo $(DEPDIR)/raidutil-creatrad.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='creatrad.cpp' object='raidutil-creatrad.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-usage.obj `if test -f 'usage.cpp'; then $(CYGPATH_W) 'usage.cpp'; else $(CYGPATH_W) '$(srcdir)/usage.cpp'; fi` + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-creatrad.o `test -f 'creatrad.cpp' || echo '$(srcdir)/'`creatrad.cpp - raidutil-zap.o: zap.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-zap.o -MD -MP -MF "$(DEPDIR)/raidutil-zap.Tpo" -c -o raidutil-zap.o `test -f 'zap.cpp' || echo '$(srcdir)/'`zap.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-zap.Tpo" "$(DEPDIR)/raidutil-zap.Po"; else rm -f "$(DEPDIR)/raidutil-zap.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-zap.o -MD -MP -MF $(DEPDIR)/raidutil-zap.Tpo -c -o raidutil-zap.o `test -f 'zap.cpp' || echo '$(srcdir)/'`zap.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-zap.Tpo $(DEPDIR)/raidutil-zap.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='zap.cpp' object='raidutil-zap.o' libtool=no @AMDEPBACKSLASH@ + raidutil-creatrad.obj: creatrad.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-creatrad.obj -MD -MP -MF "$(DEPDIR)/raidutil-creatrad.Tpo" -c -o raidutil-creatrad.obj `if test -f 'creatrad.cpp'; then $(CYGPATH_W) 'creatrad.cpp'; else $(CYGPATH_W) '$(srcdir)/creatrad.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-creatrad.Tpo" "$(DEPDIR)/raidutil-creatrad.Po"; else rm -f "$(DEPDIR)/raidutil-creatrad.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-creatrad.obj -MD -MP -MF $(DEPDIR)/raidutil-creatrad.Tpo -c -o raidutil-creatrad.obj `if test -f 'creatrad.cpp'; then $(CYGPATH_W) 'creatrad.cpp'; else $(CYGPATH_W) '$(srcdir)/creatrad.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-creatrad.Tpo $(DEPDIR)/raidutil-creatrad.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='creatrad.cpp' object='raidutil-creatrad.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-zap.o `test -f 'zap.cpp' || echo '$(srcdir)/'`zap.cpp + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-creatrad.obj `if test -f 'creatrad.cpp'; then $(CYGPATH_W) 'creatrad.cpp'; else $(CYGPATH_W) '$(srcdir)/creatrad.cpp'; fi` - raidutil-zap.obj: zap.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-zap.obj -MD -MP -MF "$(DEPDIR)/raidutil-zap.Tpo" -c -o raidutil-zap.obj `if test -f 'zap.cpp'; then $(CYGPATH_W) 'zap.cpp'; else $(CYGPATH_W) '$(srcdir)/zap.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-zap.Tpo" "$(DEPDIR)/raidutil-zap.Po"; else rm -f "$(DEPDIR)/raidutil-zap.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-zap.obj -MD -MP -MF $(DEPDIR)/raidutil-zap.Tpo -c -o raidutil-zap.obj `if test -f 'zap.cpp'; then $(CYGPATH_W) 'zap.cpp'; else $(CYGPATH_W) '$(srcdir)/zap.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-zap.Tpo $(DEPDIR)/raidutil-zap.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='zap.cpp' object='raidutil-zap.obj' libtool=no @AMDEPBACKSLASH@ + raidutil-deletrad.o: deletrad.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-deletrad.o -MD -MP -MF "$(DEPDIR)/raidutil-deletrad.Tpo" -c -o raidutil-deletrad.o `test -f 'deletrad.cpp' || echo '$(srcdir)/'`deletrad.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-deletrad.Tpo" "$(DEPDIR)/raidutil-deletrad.Po"; else rm -f "$(DEPDIR)/raidutil-deletrad.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-deletrad.o -MD -MP -MF $(DEPDIR)/raidutil-deletrad.Tpo -c -o raidutil-deletrad.o `test -f 'deletrad.cpp' || echo '$(srcdir)/'`deletrad.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-deletrad.Tpo $(DEPDIR)/raidutil-deletrad.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='deletrad.cpp' object='raidutil-deletrad.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-zap.obj `if test -f 'zap.cpp'; then $(CYGPATH_W) 'zap.cpp'; else $(CYGPATH_W) '$(srcdir)/zap.cpp'; fi` + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-deletrad.o `test -f 'deletrad.cpp' || echo '$(srcdir)/'`deletrad.cpp - raidutil-setscfg.o: setscfg.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setscfg.o -MD -MP -MF "$(DEPDIR)/raidutil-setscfg.Tpo" -c -o raidutil-setscfg.o `test -f 'setscfg.cpp' || echo '$(srcdir)/'`setscfg.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setscfg.Tpo" "$(DEPDIR)/raidutil-setscfg.Po"; else rm -f "$(DEPDIR)/raidutil-setscfg.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setscfg.o -MD -MP -MF $(DEPDIR)/raidutil-setscfg.Tpo -c -o raidutil-setscfg.o `test -f 'setscfg.cpp' || echo '$(srcdir)/'`setscfg.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setscfg.Tpo $(DEPDIR)/raidutil-setscfg.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setscfg.cpp' object='raidutil-setscfg.o' libtool=no @AMDEPBACKSLASH@ + raidutil-deletrad.obj: deletrad.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-deletrad.obj -MD -MP -MF "$(DEPDIR)/raidutil-deletrad.Tpo" -c -o raidutil-deletrad.obj `if test -f 'deletrad.cpp'; then $(CYGPATH_W) 'deletrad.cpp'; else $(CYGPATH_W) '$(srcdir)/deletrad.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-deletrad.Tpo" "$(DEPDIR)/raidutil-deletrad.Po"; else rm -f "$(DEPDIR)/raidutil-deletrad.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-deletrad.obj -MD -MP -MF $(DEPDIR)/raidutil-deletrad.Tpo -c -o raidutil-deletrad.obj `if test -f 'deletrad.cpp'; then $(CYGPATH_W) 'deletrad.cpp'; else $(CYGPATH_W) '$(srcdir)/deletrad.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-deletrad.Tpo $(DEPDIR)/raidutil-deletrad.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='deletrad.cpp' object='raidutil-deletrad.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setscfg.o `test -f 'setscfg.cpp' || echo '$(srcdir)/'`setscfg.cpp + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-deletrad.obj `if test -f 'deletrad.cpp'; then $(CYGPATH_W) 'deletrad.cpp'; else $(CYGPATH_W) '$(srcdir)/deletrad.cpp'; fi` - raidutil-setscfg.obj: setscfg.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setscfg.obj -MD -MP -MF "$(DEPDIR)/raidutil-setscfg.Tpo" -c -o raidutil-setscfg.obj `if test -f 'setscfg.cpp'; then $(CYGPATH_W) 'setscfg.cpp'; else $(CYGPATH_W) '$(srcdir)/setscfg.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setscfg.Tpo" "$(DEPDIR)/raidutil-setscfg.Po"; else rm -f "$(DEPDIR)/raidutil-setscfg.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setscfg.obj -MD -MP -MF $(DEPDIR)/raidutil-setscfg.Tpo -c -o raidutil-setscfg.obj `if test -f 'setscfg.cpp'; then $(CYGPATH_W) 'setscfg.cpp'; else $(CYGPATH_W) '$(srcdir)/setscfg.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setscfg.Tpo $(DEPDIR)/raidutil-setscfg.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setscfg.cpp' object='raidutil-setscfg.obj' libtool=no @AMDEPBACKSLASH@ + raidutil-dynsize.o: dynsize.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-dynsize.o -MD -MP -MF "$(DEPDIR)/raidutil-dynsize.Tpo" -c -o raidutil-dynsize.o `test -f 'dynsize.cpp' || echo '$(srcdir)/'`dynsize.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-dynsize.Tpo" "$(DEPDIR)/raidutil-dynsize.Po"; else rm -f "$(DEPDIR)/raidutil-dynsize.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-dynsize.o -MD -MP -MF $(DEPDIR)/raidutil-dynsize.Tpo -c -o raidutil-dynsize.o `test -f 'dynsize.cpp' || echo '$(srcdir)/'`dynsize.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-dynsize.Tpo $(DEPDIR)/raidutil-dynsize.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='dynsize.cpp' object='raidutil-dynsize.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setscfg.obj `if test -f 'setscfg.cpp'; then $(CYGPATH_W) 'setscfg.cpp'; else $(CYGPATH_W) '$(srcdir)/setscfg.cpp'; fi` + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-dynsize.o `test -f 'dynsize.cpp' || echo '$(srcdir)/'`dynsize.cpp - raidutil-segment.o: segment.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-segment.o -MD -MP -MF "$(DEPDIR)/raidutil-segment.Tpo" -c -o raidutil-segment.o `test -f 'segment.cpp' || echo '$(srcdir)/'`segment.cpp; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-segment.Tpo" "$(DEPDIR)/raidutil-segment.Po"; else rm -f "$(DEPDIR)/raidutil-segment.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-segment.o -MD -MP -MF $(DEPDIR)/raidutil-segment.Tpo -c -o raidutil-segment.o `test -f 'segment.cpp' || echo '$(srcdir)/'`segment.cpp -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-segment.Tpo $(DEPDIR)/raidutil-segment.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='segment.cpp' object='raidutil-segment.o' libtool=no @AMDEPBACKSLASH@ + raidutil-dynsize.obj: dynsize.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-dynsize.obj -MD -MP -MF "$(DEPDIR)/raidutil-dynsize.Tpo" -c -o raidutil-dynsize.obj `if test -f 'dynsize.cpp'; then $(CYGPATH_W) 'dynsize.cpp'; else $(CYGPATH_W) '$(srcdir)/dynsize.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-dynsize.Tpo" "$(DEPDIR)/raidutil-dynsize.Po"; else rm -f "$(DEPDIR)/raidutil-dynsize.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-dynsize.obj -MD -MP -MF $(DEPDIR)/raidutil-dynsize.Tpo -c -o raidutil-dynsize.obj `if test -f 'dynsize.cpp'; then $(CYGPATH_W) 'dynsize.cpp'; else $(CYGPATH_W) '$(srcdir)/dynsize.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-dynsize.Tpo $(DEPDIR)/raidutil-dynsize.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='dynsize.cpp' object='raidutil-dynsize.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-segment.o `test -f 'segment.cpp' || echo '$(srcdir)/'`segment.cpp + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-dynsize.obj `if test -f 'dynsize.cpp'; then $(CYGPATH_W) 'dynsize.cpp'; else $(CYGPATH_W) '$(srcdir)/dynsize.cpp'; fi` - raidutil-segment.obj: segment.cpp --@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-segment.obj -MD -MP -MF "$(DEPDIR)/raidutil-segment.Tpo" -c -o raidutil-segment.obj `if test -f 'segment.cpp'; then $(CYGPATH_W) 'segment.cpp'; else $(CYGPATH_W) '$(srcdir)/segment.cpp'; fi`; \ --@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-segment.Tpo" "$(DEPDIR)/raidutil-segment.Po"; else rm -f "$(DEPDIR)/raidutil-segment.Tpo"; exit 1; fi -+@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-segment.obj -MD -MP -MF $(DEPDIR)/raidutil-segment.Tpo -c -o raidutil-segment.obj `if test -f 'segment.cpp'; then $(CYGPATH_W) 'segment.cpp'; else $(CYGPATH_W) '$(srcdir)/segment.cpp'; fi` -+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-segment.Tpo $(DEPDIR)/raidutil-segment.Po - @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='segment.cpp' object='raidutil-segment.obj' libtool=no @AMDEPBACKSLASH@ + raidutil-engiface.o: engiface.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-engiface.o -MD -MP -MF "$(DEPDIR)/raidutil-engiface.Tpo" -c -o raidutil-engiface.o `test -f 'engiface.cpp' || echo '$(srcdir)/'`engiface.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-engiface.Tpo" "$(DEPDIR)/raidutil-engiface.Po"; else rm -f "$(DEPDIR)/raidutil-engiface.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-engiface.o -MD -MP -MF $(DEPDIR)/raidutil-engiface.Tpo -c -o raidutil-engiface.o `test -f 'engiface.cpp' || echo '$(srcdir)/'`engiface.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-engiface.Tpo $(DEPDIR)/raidutil-engiface.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='engiface.cpp' object='raidutil-engiface.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-segment.obj `if test -f 'segment.cpp'; then $(CYGPATH_W) 'segment.cpp'; else $(CYGPATH_W) '$(srcdir)/segment.cpp'; fi` -@@ -979,82 +1014,85 @@ mostlyclean-libtool: - clean-libtool: - -rm -rf .libs _libs - --distclean-libtool: -- -rm -f libtool --uninstall-info-am: -- - ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique - tags: TAGS - - TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) -- tags=; \ -+ set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ -+ shift; \ -+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ -- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -- $$tags $$unique; \ -+ if test $$# -gt 0; then \ -+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -+ "$$@" $$unique; \ -+ else \ -+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ -+ $$unique; \ -+ fi; \ - fi - ctags: CTAGS - CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) -- tags=; \ -- here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ -- $(AWK) ' { files[$$0] = 1; } \ -- END { for (i in files) print i; }'`; \ -- test -z "$(CTAGS_ARGS)$$tags$$unique" \ -+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ -+ END { if (nonempty) { for (i in files) print i; }; }'`; \ -+ test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ -- $$tags $$unique -+ $$unique - - GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ -- && cd $(top_srcdir) \ -- && gtags -i $(GTAGS_ARGS) $$here -+ && $(am__cd) $(top_srcdir) \ -+ && gtags -i $(GTAGS_ARGS) "$$here" - - distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - - distdir: $(DISTFILES) -- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ -- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ -- list='$(DISTFILES)'; for file in $$list; do \ -- case $$file in \ -- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ -- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ -- esac; \ -+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ -+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ -+ list='$(DISTFILES)'; \ -+ dist_files=`for file in $$list; do echo $$file; done | \ -+ sed -e "s|^$$srcdirstrip/||;t" \ -+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ -+ case $$dist_files in \ -+ */*) $(MKDIR_P) `echo "$$dist_files" | \ -+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ -+ sort -u` ;; \ -+ esac; \ -+ for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ -- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ -- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ -- dir="/$$dir"; \ -- $(mkdir_p) "$(distdir)$$dir"; \ -- else \ -- dir=''; \ -- fi; \ - if test -d $$d/$$file; then \ -+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ -+ if test -d "$(distdir)/$$file"; then \ -+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ -+ fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ -- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ -+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ -+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ -- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ -+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ -- test -f $(distdir)/$$file \ -- || cp -p $$d/$$file $(distdir)/$$file \ -+ test -f "$(distdir)/$$file" \ -+ || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -@@ -1062,8 +1100,8 @@ check-am: all-am - check: check-am - all-am: Makefile $(PROGRAMS) - installdirs: -- for dir in "$(DESTDIR)$(bindir)"; do \ -- test -z "$$dir" || $(mkdir_p) "$$dir"; \ -+ for dir in "$(DESTDIR)$(sbindir)"; do \ -+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done - install: install-am - install-exec: install-exec-am -@@ -1085,19 +1123,21 @@ clean-generic: - - distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - - maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - clean: clean-am - --clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am -+clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \ -+ mostlyclean-am - - distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile - distclean-am: clean-am distclean-compile distclean-generic \ -- distclean-libtool distclean-tags -+ distclean-tags - - dvi: dvi-am - -@@ -1105,18 +1145,38 @@ dvi-am: - - html: html-am - -+html-am: -+ - info: info-am - - info-am: - - install-data-am: - --install-exec-am: install-binPROGRAMS -+install-dvi: install-dvi-am -+ -+install-dvi-am: -+ -+install-exec-am: install-sbinPROGRAMS -+ -+install-html: install-html-am -+ -+install-html-am: - - install-info: install-info-am - -+install-info-am: -+ - install-man: - -+install-pdf: install-pdf-am -+ -+install-pdf-am: -+ -+install-ps: install-ps-am -+ -+install-ps-am: -+ - installcheck-am: - - maintainer-clean: maintainer-clean-am -@@ -1137,19 +1197,24 @@ ps: ps-am - - ps-am: - --uninstall-am: uninstall-binPROGRAMS uninstall-info-am -+uninstall-am: uninstall-sbinPROGRAMS -+ -+.MAKE: install-am install-strip -+ -+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ -+ clean-libtool clean-sbinPROGRAMS ctags distclean \ -+ distclean-compile distclean-generic distclean-libtool \ -+ distclean-tags distdir dvi dvi-am html html-am info info-am \ -+ install install-am install-data install-data-am install-dvi \ -+ install-dvi-am install-exec install-exec-am install-html \ -+ install-html-am install-info install-info-am install-man \ -+ install-pdf install-pdf-am install-ps install-ps-am \ -+ install-sbinPROGRAMS install-strip installcheck \ -+ installcheck-am installdirs maintainer-clean \ -+ maintainer-clean-generic mostlyclean mostlyclean-compile \ -+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ -+ tags uninstall uninstall-am uninstall-sbinPROGRAMS + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-engiface.o `test -f 'engiface.cpp' || echo '$(srcdir)/'`engiface.cpp --.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ -- clean-generic clean-libtool ctags distclean distclean-compile \ -- distclean-generic distclean-libtool distclean-tags distdir dvi \ -- dvi-am html html-am info info-am install install-am \ -- install-binPROGRAMS install-data install-data-am install-exec \ -- install-exec-am install-info install-info-am install-man \ -- install-strip installcheck installcheck-am installdirs \ -- maintainer-clean maintainer-clean-generic mostlyclean \ -- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ -- pdf pdf-am ps ps-am tags uninstall uninstall-am \ -- uninstall-binPROGRAMS uninstall-info-am + raidutil-engiface.obj: engiface.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-engiface.obj -MD -MP -MF "$(DEPDIR)/raidutil-engiface.Tpo" -c -o raidutil-engiface.obj `if test -f 'engiface.cpp'; then $(CYGPATH_W) 'engiface.cpp'; else $(CYGPATH_W) '$(srcdir)/engiface.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-engiface.Tpo" "$(DEPDIR)/raidutil-engiface.Po"; else rm -f "$(DEPDIR)/raidutil-engiface.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-engiface.obj -MD -MP -MF $(DEPDIR)/raidutil-engiface.Tpo -c -o raidutil-engiface.obj `if test -f 'engiface.cpp'; then $(CYGPATH_W) 'engiface.cpp'; else $(CYGPATH_W) '$(srcdir)/engiface.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-engiface.Tpo $(DEPDIR)/raidutil-engiface.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='engiface.cpp' object='raidutil-engiface.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-engiface.obj `if test -f 'engiface.cpp'; then $(CYGPATH_W) 'engiface.cpp'; else $(CYGPATH_W) '$(srcdir)/engiface.cpp'; fi` - # Tell versions [3.59,3.63) of GNU make to not export all variables. - # Otherwise a system limit (for SysV at least) may be exceeded. ---- raidutils-0.0.6.orig/raidutil/flashmem.cpp -+++ raidutils-0.0.6/raidutil/flashmem.cpp -@@ -59,9 +59,12 @@ - * - * Version Control: - * --* $Revision: 5 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-05-05 12:49:12 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-eventlog.o: eventlog.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-eventlog.o -MD -MP -MF "$(DEPDIR)/raidutil-eventlog.Tpo" -c -o raidutil-eventlog.o `test -f 'eventlog.cpp' || echo '$(srcdir)/'`eventlog.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-eventlog.Tpo" "$(DEPDIR)/raidutil-eventlog.Po"; else rm -f "$(DEPDIR)/raidutil-eventlog.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-eventlog.o -MD -MP -MF $(DEPDIR)/raidutil-eventlog.Tpo -c -o raidutil-eventlog.o `test -f 'eventlog.cpp' || echo '$(srcdir)/'`eventlog.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-eventlog.Tpo $(DEPDIR)/raidutil-eventlog.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='eventlog.cpp' object='raidutil-eventlog.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-eventlog.o `test -f 'eventlog.cpp' || echo '$(srcdir)/'`eventlog.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/listdev.hpp -+++ raidutils-0.0.6/raidutil/listdev.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 23 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-eventlog.obj: eventlog.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-eventlog.obj -MD -MP -MF "$(DEPDIR)/raidutil-eventlog.Tpo" -c -o raidutil-eventlog.obj `if test -f 'eventlog.cpp'; then $(CYGPATH_W) 'eventlog.cpp'; else $(CYGPATH_W) '$(srcdir)/eventlog.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-eventlog.Tpo" "$(DEPDIR)/raidutil-eventlog.Po"; else rm -f "$(DEPDIR)/raidutil-eventlog.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-eventlog.obj -MD -MP -MF $(DEPDIR)/raidutil-eventlog.Tpo -c -o raidutil-eventlog.obj `if test -f 'eventlog.cpp'; then $(CYGPATH_W) 'eventlog.cpp'; else $(CYGPATH_W) '$(srcdir)/eventlog.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-eventlog.Tpo $(DEPDIR)/raidutil-eventlog.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='eventlog.cpp' object='raidutil-eventlog.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-eventlog.obj `if test -f 'eventlog.cpp'; then $(CYGPATH_W) 'eventlog.cpp'; else $(CYGPATH_W) '$(srcdir)/eventlog.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/rmwflash.cpp -+++ raidutils-0.0.6/raidutil/rmwflash.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 4 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-expand.o: expand.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-expand.o -MD -MP -MF "$(DEPDIR)/raidutil-expand.Tpo" -c -o raidutil-expand.o `test -f 'expand.cpp' || echo '$(srcdir)/'`expand.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-expand.Tpo" "$(DEPDIR)/raidutil-expand.Po"; else rm -f "$(DEPDIR)/raidutil-expand.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-expand.o -MD -MP -MF $(DEPDIR)/raidutil-expand.Tpo -c -o raidutil-expand.o `test -f 'expand.cpp' || echo '$(srcdir)/'`expand.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-expand.Tpo $(DEPDIR)/raidutil-expand.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='expand.cpp' object='raidutil-expand.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-expand.o `test -f 'expand.cpp' || echo '$(srcdir)/'`expand.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/intlist.cpp -+++ raidutils-0.0.6/raidutil/intlist.cpp -@@ -39,9 +39,12 @@ - solution in coding C++ without STL. - * Version Control: - * --* $Revision: 7 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:12 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-expand.obj: expand.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-expand.obj -MD -MP -MF "$(DEPDIR)/raidutil-expand.Tpo" -c -o raidutil-expand.obj `if test -f 'expand.cpp'; then $(CYGPATH_W) 'expand.cpp'; else $(CYGPATH_W) '$(srcdir)/expand.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-expand.Tpo" "$(DEPDIR)/raidutil-expand.Po"; else rm -f "$(DEPDIR)/raidutil-expand.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-expand.obj -MD -MP -MF $(DEPDIR)/raidutil-expand.Tpo -c -o raidutil-expand.obj `if test -f 'expand.cpp'; then $(CYGPATH_W) 'expand.cpp'; else $(CYGPATH_W) '$(srcdir)/expand.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-expand.Tpo $(DEPDIR)/raidutil-expand.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='expand.cpp' object='raidutil-expand.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-expand.obj `if test -f 'expand.cpp'; then $(CYGPATH_W) 'expand.cpp'; else $(CYGPATH_W) '$(srcdir)/expand.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/strlist.cpp -+++ raidutils-0.0.6/raidutil/strlist.cpp -@@ -39,9 +39,12 @@ - solution in coding C++ without STL. - * Version Control: - * --* $Revision: 7 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-flash.o: flash.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flash.o -MD -MP -MF "$(DEPDIR)/raidutil-flash.Tpo" -c -o raidutil-flash.o `test -f 'flash.cpp' || echo '$(srcdir)/'`flash.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-flash.Tpo" "$(DEPDIR)/raidutil-flash.Po"; else rm -f "$(DEPDIR)/raidutil-flash.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flash.o -MD -MP -MF $(DEPDIR)/raidutil-flash.Tpo -c -o raidutil-flash.o `test -f 'flash.cpp' || echo '$(srcdir)/'`flash.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-flash.Tpo $(DEPDIR)/raidutil-flash.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='flash.cpp' object='raidutil-flash.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-flash.o `test -f 'flash.cpp' || echo '$(srcdir)/'`flash.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/rscenum.h -+++ raidutils-0.0.6/raidutil/rscenum.h -@@ -593,7 +593,7 @@ enum StringNames { - STR_ERR_FWD_NOT_INITIALIZED, - STR_ERR_FWD_BLK_MISMATCH, - STR_ERR_FWD_BLK_OVERFLOW, -- STR_ERR_RSV_REMOVEABLE, -+ STR_ERR_RSV_REMOVABLE, - STR_ERR_RSV_NOT_DASD, - STR_ERR_RSV_NON_ZERO, - STR_ERR_RSV_HBA_UNABLE, ---- raidutils-0.0.6.orig/raidutil/showinq.hpp -+++ raidutils-0.0.6/raidutil/showinq.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 5 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:12 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-flash.obj: flash.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flash.obj -MD -MP -MF "$(DEPDIR)/raidutil-flash.Tpo" -c -o raidutil-flash.obj `if test -f 'flash.cpp'; then $(CYGPATH_W) 'flash.cpp'; else $(CYGPATH_W) '$(srcdir)/flash.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-flash.Tpo" "$(DEPDIR)/raidutil-flash.Po"; else rm -f "$(DEPDIR)/raidutil-flash.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flash.obj -MD -MP -MF $(DEPDIR)/raidutil-flash.Tpo -c -o raidutil-flash.obj `if test -f 'flash.cpp'; then $(CYGPATH_W) 'flash.cpp'; else $(CYGPATH_W) '$(srcdir)/flash.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-flash.Tpo $(DEPDIR)/raidutil-flash.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='flash.cpp' object='raidutil-flash.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-flash.obj `if test -f 'flash.cpp'; then $(CYGPATH_W) 'flash.cpp'; else $(CYGPATH_W) '$(srcdir)/flash.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/rawdata.cpp -+++ raidutils-0.0.6/raidutil/rawdata.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 2 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:13 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-flashmem.o: flashmem.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flashmem.o -MD -MP -MF "$(DEPDIR)/raidutil-flashmem.Tpo" -c -o raidutil-flashmem.o `test -f 'flashmem.cpp' || echo '$(srcdir)/'`flashmem.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-flashmem.Tpo" "$(DEPDIR)/raidutil-flashmem.Po"; else rm -f "$(DEPDIR)/raidutil-flashmem.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flashmem.o -MD -MP -MF $(DEPDIR)/raidutil-flashmem.Tpo -c -o raidutil-flashmem.o `test -f 'flashmem.cpp' || echo '$(srcdir)/'`flashmem.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-flashmem.Tpo $(DEPDIR)/raidutil-flashmem.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='flashmem.cpp' object='raidutil-flashmem.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-flashmem.o `test -f 'flashmem.cpp' || echo '$(srcdir)/'`flashmem.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/quietmod.hpp -+++ raidutils-0.0.6/raidutil/quietmod.hpp -@@ -41,9 +41,12 @@ - * Description: This toggles quiet mode on and off. - * Version Control: - * --* $Revision: 5 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:15 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-flashmem.obj: flashmem.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flashmem.obj -MD -MP -MF "$(DEPDIR)/raidutil-flashmem.Tpo" -c -o raidutil-flashmem.obj `if test -f 'flashmem.cpp'; then $(CYGPATH_W) 'flashmem.cpp'; else $(CYGPATH_W) '$(srcdir)/flashmem.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-flashmem.Tpo" "$(DEPDIR)/raidutil-flashmem.Po"; else rm -f "$(DEPDIR)/raidutil-flashmem.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-flashmem.obj -MD -MP -MF $(DEPDIR)/raidutil-flashmem.Tpo -c -o raidutil-flashmem.obj `if test -f 'flashmem.cpp'; then $(CYGPATH_W) 'flashmem.cpp'; else $(CYGPATH_W) '$(srcdir)/flashmem.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-flashmem.Tpo $(DEPDIR)/raidutil-flashmem.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='flashmem.cpp' object='raidutil-flashmem.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-flashmem.obj `if test -f 'flashmem.cpp'; then $(CYGPATH_W) 'flashmem.cpp'; else $(CYGPATH_W) '$(srcdir)/flashmem.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/setspeed.cpp -+++ raidutils-0.0.6/raidutil/setspeed.cpp -@@ -38,9 +38,12 @@ - * Description: This command sets the bus speed. - * Version Control: - * --* $Revision: 13 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:11 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-forcest.o: forcest.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-forcest.o -MD -MP -MF "$(DEPDIR)/raidutil-forcest.Tpo" -c -o raidutil-forcest.o `test -f 'forcest.cpp' || echo '$(srcdir)/'`forcest.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-forcest.Tpo" "$(DEPDIR)/raidutil-forcest.Po"; else rm -f "$(DEPDIR)/raidutil-forcest.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-forcest.o -MD -MP -MF $(DEPDIR)/raidutil-forcest.Tpo -c -o raidutil-forcest.o `test -f 'forcest.cpp' || echo '$(srcdir)/'`forcest.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-forcest.Tpo $(DEPDIR)/raidutil-forcest.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='forcest.cpp' object='raidutil-forcest.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-forcest.o `test -f 'forcest.cpp' || echo '$(srcdir)/'`forcest.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/rdutlosd.cpp -+++ raidutils-0.0.6/raidutil/rdutlosd.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 1 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-forcest.obj: forcest.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-forcest.obj -MD -MP -MF "$(DEPDIR)/raidutil-forcest.Tpo" -c -o raidutil-forcest.obj `if test -f 'forcest.cpp'; then $(CYGPATH_W) 'forcest.cpp'; else $(CYGPATH_W) '$(srcdir)/forcest.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-forcest.Tpo" "$(DEPDIR)/raidutil-forcest.Po"; else rm -f "$(DEPDIR)/raidutil-forcest.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-forcest.obj -MD -MP -MF $(DEPDIR)/raidutil-forcest.Tpo -c -o raidutil-forcest.obj `if test -f 'forcest.cpp'; then $(CYGPATH_W) 'forcest.cpp'; else $(CYGPATH_W) '$(srcdir)/forcest.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-forcest.Tpo $(DEPDIR)/raidutil-forcest.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='forcest.cpp' object='raidutil-forcest.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-forcest.obj `if test -f 'forcest.cpp'; then $(CYGPATH_W) 'forcest.cpp'; else $(CYGPATH_W) '$(srcdir)/forcest.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/strlist.hpp -+++ raidutils-0.0.6/raidutil/strlist.hpp -@@ -42,9 +42,12 @@ - solution in coding C++ without STL. - * Version Control: - * --* $Revision: 6 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:13 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-id_list.o: id_list.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-id_list.o -MD -MP -MF "$(DEPDIR)/raidutil-id_list.Tpo" -c -o raidutil-id_list.o `test -f 'id_list.cpp' || echo '$(srcdir)/'`id_list.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-id_list.Tpo" "$(DEPDIR)/raidutil-id_list.Po"; else rm -f "$(DEPDIR)/raidutil-id_list.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-id_list.o -MD -MP -MF $(DEPDIR)/raidutil-id_list.Tpo -c -o raidutil-id_list.o `test -f 'id_list.cpp' || echo '$(srcdir)/'`id_list.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-id_list.Tpo $(DEPDIR)/raidutil-id_list.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='id_list.cpp' object='raidutil-id_list.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-id_list.o `test -f 'id_list.cpp' || echo '$(srcdir)/'`id_list.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/listdev.cpp -+++ raidutils-0.0.6/raidutil/listdev.cpp -@@ -38,9 +38,12 @@ - * Description: This command lists all - * Version Control: - * --* $Revision: 97 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:13 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-id_list.obj: id_list.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-id_list.obj -MD -MP -MF "$(DEPDIR)/raidutil-id_list.Tpo" -c -o raidutil-id_list.obj `if test -f 'id_list.cpp'; then $(CYGPATH_W) 'id_list.cpp'; else $(CYGPATH_W) '$(srcdir)/id_list.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-id_list.Tpo" "$(DEPDIR)/raidutil-id_list.Po"; else rm -f "$(DEPDIR)/raidutil-id_list.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-id_list.obj -MD -MP -MF $(DEPDIR)/raidutil-id_list.Tpo -c -o raidutil-id_list.obj `if test -f 'id_list.cpp'; then $(CYGPATH_W) 'id_list.cpp'; else $(CYGPATH_W) '$(srcdir)/id_list.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-id_list.Tpo $(DEPDIR)/raidutil-id_list.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='id_list.cpp' object='raidutil-id_list.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-id_list.obj `if test -f 'id_list.cpp'; then $(CYGPATH_W) 'id_list.cpp'; else $(CYGPATH_W) '$(srcdir)/id_list.cpp'; fi` - /*** INCLUDES ***/ -@@ -2336,7 +2339,7 @@ Command::Dpt_Error List_Device::List_Tag - if (more_Devs_Left) - { - char tempBuf[5]; -- sprintf (tempBuf, "%d", this_Objs_Tag); -+ sprintf (tempBuf, "%d", (int)this_Objs_Tag); - output.add_Item (tempBuf); + raidutil-intlist.o: intlist.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-intlist.o -MD -MP -MF "$(DEPDIR)/raidutil-intlist.Tpo" -c -o raidutil-intlist.o `test -f 'intlist.cpp' || echo '$(srcdir)/'`intlist.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-intlist.Tpo" "$(DEPDIR)/raidutil-intlist.Po"; else rm -f "$(DEPDIR)/raidutil-intlist.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-intlist.o -MD -MP -MF $(DEPDIR)/raidutil-intlist.Tpo -c -o raidutil-intlist.o `test -f 'intlist.cpp' || echo '$(srcdir)/'`intlist.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-intlist.Tpo $(DEPDIR)/raidutil-intlist.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='intlist.cpp' object='raidutil-intlist.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-intlist.o `test -f 'intlist.cpp' || echo '$(srcdir)/'`intlist.cpp - err |= List_This_Device (output, this_Objs_Tag, devs_Type); ---- raidutils-0.0.6.orig/raidutil/uartdmp.hpp -+++ raidutils-0.0.6/raidutil/uartdmp.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 3 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch -+* - *****************************************************************************/ + raidutil-intlist.obj: intlist.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-intlist.obj -MD -MP -MF "$(DEPDIR)/raidutil-intlist.Tpo" -c -o raidutil-intlist.obj `if test -f 'intlist.cpp'; then $(CYGPATH_W) 'intlist.cpp'; else $(CYGPATH_W) '$(srcdir)/intlist.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-intlist.Tpo" "$(DEPDIR)/raidutil-intlist.Po"; else rm -f "$(DEPDIR)/raidutil-intlist.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-intlist.obj -MD -MP -MF $(DEPDIR)/raidutil-intlist.Tpo -c -o raidutil-intlist.obj `if test -f 'intlist.cpp'; then $(CYGPATH_W) 'intlist.cpp'; else $(CYGPATH_W) '$(srcdir)/intlist.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-intlist.Tpo $(DEPDIR)/raidutil-intlist.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='intlist.cpp' object='raidutil-intlist.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-intlist.obj `if test -f 'intlist.cpp'; then $(CYGPATH_W) 'intlist.cpp'; else $(CYGPATH_W) '$(srcdir)/intlist.cpp'; fi` - /*** INCLUDES ***/ -@@ -59,7 +62,7 @@ class UartDmp:public Command - { + raidutil-listdev.o: listdev.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-listdev.o -MD -MP -MF "$(DEPDIR)/raidutil-listdev.Tpo" -c -o raidutil-listdev.o `test -f 'listdev.cpp' || echo '$(srcdir)/'`listdev.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-listdev.Tpo" "$(DEPDIR)/raidutil-listdev.Po"; else rm -f "$(DEPDIR)/raidutil-listdev.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-listdev.o -MD -MP -MF $(DEPDIR)/raidutil-listdev.Tpo -c -o raidutil-listdev.o `test -f 'listdev.cpp' || echo '$(srcdir)/'`listdev.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-listdev.Tpo $(DEPDIR)/raidutil-listdev.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='listdev.cpp' object='raidutil-listdev.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-listdev.o `test -f 'listdev.cpp' || echo '$(srcdir)/'`listdev.cpp - public: -- UartDmp::UartDmp(int hbaNo, char *fileName); -+ UartDmp(int hbaNo, char *fileName); - UartDmp(const UartDmp &new_UartDmp); - virtual ~UartDmp(); + raidutil-listdev.obj: listdev.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-listdev.obj -MD -MP -MF "$(DEPDIR)/raidutil-listdev.Tpo" -c -o raidutil-listdev.obj `if test -f 'listdev.cpp'; then $(CYGPATH_W) 'listdev.cpp'; else $(CYGPATH_W) '$(srcdir)/listdev.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-listdev.Tpo" "$(DEPDIR)/raidutil-listdev.Po"; else rm -f "$(DEPDIR)/raidutil-listdev.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-listdev.obj -MD -MP -MF $(DEPDIR)/raidutil-listdev.Tpo -c -o raidutil-listdev.obj `if test -f 'listdev.cpp'; then $(CYGPATH_W) 'listdev.cpp'; else $(CYGPATH_W) '$(srcdir)/listdev.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-listdev.Tpo $(DEPDIR)/raidutil-listdev.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='listdev.cpp' object='raidutil-listdev.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-listdev.obj `if test -f 'listdev.cpp'; then $(CYGPATH_W) 'listdev.cpp'; else $(CYGPATH_W) '$(srcdir)/listdev.cpp'; fi` ---- raidutils-0.0.6.orig/raidutil/alarm.cpp -+++ raidutils-0.0.6/raidutil/alarm.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 11 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:15 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-lzssdon.o: lzssdon.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzssdon.o -MD -MP -MF "$(DEPDIR)/raidutil-lzssdon.Tpo" -c -o raidutil-lzssdon.o `test -f 'lzssdon.cpp' || echo '$(srcdir)/'`lzssdon.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-lzssdon.Tpo" "$(DEPDIR)/raidutil-lzssdon.Po"; else rm -f "$(DEPDIR)/raidutil-lzssdon.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzssdon.o -MD -MP -MF $(DEPDIR)/raidutil-lzssdon.Tpo -c -o raidutil-lzssdon.o `test -f 'lzssdon.cpp' || echo '$(srcdir)/'`lzssdon.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-lzssdon.Tpo $(DEPDIR)/raidutil-lzssdon.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='lzssdon.cpp' object='raidutil-lzssdon.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-lzssdon.o `test -f 'lzssdon.cpp' || echo '$(srcdir)/'`lzssdon.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/namarray.cpp -+++ raidutils-0.0.6/raidutil/namarray.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 1 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-lzssdon.obj: lzssdon.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzssdon.obj -MD -MP -MF "$(DEPDIR)/raidutil-lzssdon.Tpo" -c -o raidutil-lzssdon.obj `if test -f 'lzssdon.cpp'; then $(CYGPATH_W) 'lzssdon.cpp'; else $(CYGPATH_W) '$(srcdir)/lzssdon.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-lzssdon.Tpo" "$(DEPDIR)/raidutil-lzssdon.Po"; else rm -f "$(DEPDIR)/raidutil-lzssdon.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzssdon.obj -MD -MP -MF $(DEPDIR)/raidutil-lzssdon.Tpo -c -o raidutil-lzssdon.obj `if test -f 'lzssdon.cpp'; then $(CYGPATH_W) 'lzssdon.cpp'; else $(CYGPATH_W) '$(srcdir)/lzssdon.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-lzssdon.Tpo $(DEPDIR)/raidutil-lzssdon.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='lzssdon.cpp' object='raidutil-lzssdon.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-lzssdon.obj `if test -f 'lzssdon.cpp'; then $(CYGPATH_W) 'lzssdon.cpp'; else $(CYGPATH_W) '$(srcdir)/lzssdon.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/nvrambit.cpp -+++ raidutils-0.0.6/raidutil/nvrambit.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 5 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-lzstrbuf.o: lzstrbuf.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzstrbuf.o -MD -MP -MF "$(DEPDIR)/raidutil-lzstrbuf.Tpo" -c -o raidutil-lzstrbuf.o `test -f 'lzstrbuf.cpp' || echo '$(srcdir)/'`lzstrbuf.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-lzstrbuf.Tpo" "$(DEPDIR)/raidutil-lzstrbuf.Po"; else rm -f "$(DEPDIR)/raidutil-lzstrbuf.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzstrbuf.o -MD -MP -MF $(DEPDIR)/raidutil-lzstrbuf.Tpo -c -o raidutil-lzstrbuf.o `test -f 'lzstrbuf.cpp' || echo '$(srcdir)/'`lzstrbuf.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-lzstrbuf.Tpo $(DEPDIR)/raidutil-lzstrbuf.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='lzstrbuf.cpp' object='raidutil-lzstrbuf.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-lzstrbuf.o `test -f 'lzstrbuf.cpp' || echo '$(srcdir)/'`lzstrbuf.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/setspeed.hpp -+++ raidutils-0.0.6/raidutil/setspeed.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 2 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-lzstrbuf.obj: lzstrbuf.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzstrbuf.obj -MD -MP -MF "$(DEPDIR)/raidutil-lzstrbuf.Tpo" -c -o raidutil-lzstrbuf.obj `if test -f 'lzstrbuf.cpp'; then $(CYGPATH_W) 'lzstrbuf.cpp'; else $(CYGPATH_W) '$(srcdir)/lzstrbuf.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-lzstrbuf.Tpo" "$(DEPDIR)/raidutil-lzstrbuf.Po"; else rm -f "$(DEPDIR)/raidutil-lzstrbuf.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-lzstrbuf.obj -MD -MP -MF $(DEPDIR)/raidutil-lzstrbuf.Tpo -c -o raidutil-lzstrbuf.obj `if test -f 'lzstrbuf.cpp'; then $(CYGPATH_W) 'lzstrbuf.cpp'; else $(CYGPATH_W) '$(srcdir)/lzstrbuf.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-lzstrbuf.Tpo $(DEPDIR)/raidutil-lzstrbuf.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='lzstrbuf.cpp' object='raidutil-lzstrbuf.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-lzstrbuf.obj `if test -f 'lzstrbuf.cpp'; then $(CYGPATH_W) 'lzstrbuf.cpp'; else $(CYGPATH_W) '$(srcdir)/lzstrbuf.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/config.cpp -+++ raidutils-0.0.6/raidutil/config.cpp -@@ -38,9 +38,12 @@ - * Description: This command loads and saves controller configuration - * Version Control: - * --* $Revision: 7 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:12 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-modnvram.o: modnvram.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-modnvram.o -MD -MP -MF "$(DEPDIR)/raidutil-modnvram.Tpo" -c -o raidutil-modnvram.o `test -f 'modnvram.cpp' || echo '$(srcdir)/'`modnvram.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-modnvram.Tpo" "$(DEPDIR)/raidutil-modnvram.Po"; else rm -f "$(DEPDIR)/raidutil-modnvram.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-modnvram.o -MD -MP -MF $(DEPDIR)/raidutil-modnvram.Tpo -c -o raidutil-modnvram.o `test -f 'modnvram.cpp' || echo '$(srcdir)/'`modnvram.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-modnvram.Tpo $(DEPDIR)/raidutil-modnvram.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='modnvram.cpp' object='raidutil-modnvram.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-modnvram.o `test -f 'modnvram.cpp' || echo '$(srcdir)/'`modnvram.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/pagemod.hpp -+++ raidutils-0.0.6/raidutil/pagemod.hpp -@@ -41,9 +41,12 @@ - * Description: This toggles pagenation mode on and off. - * Version Control: - * --* $Revision: 2 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:13 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-modnvram.obj: modnvram.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-modnvram.obj -MD -MP -MF "$(DEPDIR)/raidutil-modnvram.Tpo" -c -o raidutil-modnvram.obj `if test -f 'modnvram.cpp'; then $(CYGPATH_W) 'modnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/modnvram.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-modnvram.Tpo" "$(DEPDIR)/raidutil-modnvram.Po"; else rm -f "$(DEPDIR)/raidutil-modnvram.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-modnvram.obj -MD -MP -MF $(DEPDIR)/raidutil-modnvram.Tpo -c -o raidutil-modnvram.obj `if test -f 'modnvram.cpp'; then $(CYGPATH_W) 'modnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/modnvram.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-modnvram.Tpo $(DEPDIR)/raidutil-modnvram.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='modnvram.cpp' object='raidutil-modnvram.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-modnvram.obj `if test -f 'modnvram.cpp'; then $(CYGPATH_W) 'modnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/modnvram.cpp'; fi` + + raidutil-namarray.o: namarray.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-namarray.o -MD -MP -MF "$(DEPDIR)/raidutil-namarray.Tpo" -c -o raidutil-namarray.o `test -f 'namarray.cpp' || echo '$(srcdir)/'`namarray.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-namarray.Tpo" "$(DEPDIR)/raidutil-namarray.Po"; else rm -f "$(DEPDIR)/raidutil-namarray.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-namarray.o -MD -MP -MF $(DEPDIR)/raidutil-namarray.Tpo -c -o raidutil-namarray.o `test -f 'namarray.cpp' || echo '$(srcdir)/'`namarray.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-namarray.Tpo $(DEPDIR)/raidutil-namarray.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='namarray.cpp' object='raidutil-namarray.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-namarray.o `test -f 'namarray.cpp' || echo '$(srcdir)/'`namarray.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/config.hpp -+++ raidutils-0.0.6/raidutil/config.hpp -@@ -41,9 +41,12 @@ - * Description: This command loads and saves controller configuration - * Version Control: - * --* $Revision: 1 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-namarray.obj: namarray.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-namarray.obj -MD -MP -MF "$(DEPDIR)/raidutil-namarray.Tpo" -c -o raidutil-namarray.obj `if test -f 'namarray.cpp'; then $(CYGPATH_W) 'namarray.cpp'; else $(CYGPATH_W) '$(srcdir)/namarray.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-namarray.Tpo" "$(DEPDIR)/raidutil-namarray.Po"; else rm -f "$(DEPDIR)/raidutil-namarray.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-namarray.obj -MD -MP -MF $(DEPDIR)/raidutil-namarray.Tpo -c -o raidutil-namarray.obj `if test -f 'namarray.cpp'; then $(CYGPATH_W) 'namarray.cpp'; else $(CYGPATH_W) '$(srcdir)/namarray.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-namarray.Tpo $(DEPDIR)/raidutil-namarray.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='namarray.cpp' object='raidutil-namarray.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-namarray.obj `if test -f 'namarray.cpp'; then $(CYGPATH_W) 'namarray.cpp'; else $(CYGPATH_W) '$(srcdir)/namarray.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/rscstrs.h -+++ raidutils-0.0.6/raidutil/rscstrs.h -@@ -332,7 +332,7 @@ char * EventStrings[] = - // STR_STATUS = 160, - // STR_RAID_INFO = 161, - // STR_SCSI_INFO = 162, -- "Removeable", // STR_REMOVABLE -+ "Removable", // STR_REMOVABLE - // STR_CAPABILITIES = 164, - // STR_REL_ADDR = 165, - "wide", // STR_WIDE -@@ -607,7 +607,7 @@ char * EventStrings[] = - "Error: fwd not initialized",//STR_ERR_FWD_NOT_INITIALIZED - "Error: fwd blk mismatch", //STR_ERR_FWD_BLK_MISMATCH - "Error: fwd blk overflow", //STR_ERR_FWD_BLK_OVERFLOW -- "Error: rsv removeable", //STR_ERR_RSV_REMOVEABLE -+ "Error: rsv removable", //STR_ERR_RSV_REMOVABLE - "Error: rsv not dasd", //STR_ERR_RSV_NOT_DASD - "Error: rsv non zero", //STR_ERR_RSV_NON_ZERO - "Error: rsv hba unable",//STR_ERR_RSV_HBA_UNABLE ---- raidutils-0.0.6.orig/raidutil/rstnvram.hpp -+++ raidutils-0.0.6/raidutil/rstnvram.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 4 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:11 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-nvrambit.o: nvrambit.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-nvrambit.o -MD -MP -MF "$(DEPDIR)/raidutil-nvrambit.Tpo" -c -o raidutil-nvrambit.o `test -f 'nvrambit.cpp' || echo '$(srcdir)/'`nvrambit.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-nvrambit.Tpo" "$(DEPDIR)/raidutil-nvrambit.Po"; else rm -f "$(DEPDIR)/raidutil-nvrambit.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-nvrambit.o -MD -MP -MF $(DEPDIR)/raidutil-nvrambit.Tpo -c -o raidutil-nvrambit.o `test -f 'nvrambit.cpp' || echo '$(srcdir)/'`nvrambit.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-nvrambit.Tpo $(DEPDIR)/raidutil-nvrambit.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='nvrambit.cpp' object='raidutil-nvrambit.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-nvrambit.o `test -f 'nvrambit.cpp' || echo '$(srcdir)/'`nvrambit.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/parserr.hpp -+++ raidutils-0.0.6/raidutil/parserr.hpp -@@ -43,9 +43,12 @@ - not previous commnads that parsed right (I think). - * Version Control: - * --* $Revision: 5 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:15 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-nvrambit.obj: nvrambit.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-nvrambit.obj -MD -MP -MF "$(DEPDIR)/raidutil-nvrambit.Tpo" -c -o raidutil-nvrambit.obj `if test -f 'nvrambit.cpp'; then $(CYGPATH_W) 'nvrambit.cpp'; else $(CYGPATH_W) '$(srcdir)/nvrambit.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-nvrambit.Tpo" "$(DEPDIR)/raidutil-nvrambit.Po"; else rm -f "$(DEPDIR)/raidutil-nvrambit.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-nvrambit.obj -MD -MP -MF $(DEPDIR)/raidutil-nvrambit.Tpo -c -o raidutil-nvrambit.obj `if test -f 'nvrambit.cpp'; then $(CYGPATH_W) 'nvrambit.cpp'; else $(CYGPATH_W) '$(srcdir)/nvrambit.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-nvrambit.Tpo $(DEPDIR)/raidutil-nvrambit.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='nvrambit.cpp' object='raidutil-nvrambit.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-nvrambit.obj `if test -f 'nvrambit.cpp'; then $(CYGPATH_W) 'nvrambit.cpp'; else $(CYGPATH_W) '$(srcdir)/nvrambit.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/flashmem.h -+++ raidutils-0.0.6/raidutil/flashmem.h -@@ -60,9 +60,12 @@ - * - * Version Control: - * --* $Revision: 4 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-05-05 12:46:43 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-parsargv.o: parsargv.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parsargv.o -MD -MP -MF "$(DEPDIR)/raidutil-parsargv.Tpo" -c -o raidutil-parsargv.o `test -f 'parsargv.cpp' || echo '$(srcdir)/'`parsargv.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parsargv.Tpo" "$(DEPDIR)/raidutil-parsargv.Po"; else rm -f "$(DEPDIR)/raidutil-parsargv.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parsargv.o -MD -MP -MF $(DEPDIR)/raidutil-parsargv.Tpo -c -o raidutil-parsargv.o `test -f 'parsargv.cpp' || echo '$(srcdir)/'`parsargv.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parsargv.Tpo $(DEPDIR)/raidutil-parsargv.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parsargv.cpp' object='raidutil-parsargv.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parsargv.o `test -f 'parsargv.cpp' || echo '$(srcdir)/'`parsargv.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/setscfg.cpp -+++ raidutils-0.0.6/raidutil/setscfg.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 1 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-parsargv.obj: parsargv.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parsargv.obj -MD -MP -MF "$(DEPDIR)/raidutil-parsargv.Tpo" -c -o raidutil-parsargv.obj `if test -f 'parsargv.cpp'; then $(CYGPATH_W) 'parsargv.cpp'; else $(CYGPATH_W) '$(srcdir)/parsargv.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parsargv.Tpo" "$(DEPDIR)/raidutil-parsargv.Po"; else rm -f "$(DEPDIR)/raidutil-parsargv.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parsargv.obj -MD -MP -MF $(DEPDIR)/raidutil-parsargv.Tpo -c -o raidutil-parsargv.obj `if test -f 'parsargv.cpp'; then $(CYGPATH_W) 'parsargv.cpp'; else $(CYGPATH_W) '$(srcdir)/parsargv.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parsargv.Tpo $(DEPDIR)/raidutil-parsargv.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parsargv.cpp' object='raidutil-parsargv.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parsargv.obj `if test -f 'parsargv.cpp'; then $(CYGPATH_W) 'parsargv.cpp'; else $(CYGPATH_W) '$(srcdir)/parsargv.cpp'; fi` - /*** INCLUDES ***/ -@@ -95,4 +98,4 @@ Command &setscfg::Clone() const - ENTER("Command &setscfg::Clone() const"); - EXIT(); - return(*new setscfg(*this)); --} -\ No newline at end of file -+} ---- raidutils-0.0.6.orig/raidutil/segment.hpp -+++ raidutils-0.0.6/raidutil/segment.hpp -@@ -51,7 +51,7 @@ class arraySegment:public Command - { + raidutil-parser.o: parser.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parser.o -MD -MP -MF "$(DEPDIR)/raidutil-parser.Tpo" -c -o raidutil-parser.o `test -f 'parser.cpp' || echo '$(srcdir)/'`parser.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parser.Tpo" "$(DEPDIR)/raidutil-parser.Po"; else rm -f "$(DEPDIR)/raidutil-parser.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parser.o -MD -MP -MF $(DEPDIR)/raidutil-parser.Tpo -c -o raidutil-parser.o `test -f 'parser.cpp' || echo '$(srcdir)/'`parser.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parser.Tpo $(DEPDIR)/raidutil-parser.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parser.cpp' object='raidutil-parser.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parser.o `test -f 'parser.cpp' || echo '$(srcdir)/'`parser.cpp - public: -- arraySegment::arraySegment(SCSI_Address raidToSeg, uLONG segSize[8], uLONG segOffset[8], bool showSeg); -+ arraySegment(SCSI_Address raidToSeg, uLONG segSize[8], uLONG segOffset[8], bool showSeg); - arraySegment(const arraySegment &new_arraySegment); - virtual ~arraySegment(); + raidutil-parser.obj: parser.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parser.obj -MD -MP -MF "$(DEPDIR)/raidutil-parser.Tpo" -c -o raidutil-parser.obj `if test -f 'parser.cpp'; then $(CYGPATH_W) 'parser.cpp'; else $(CYGPATH_W) '$(srcdir)/parser.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parser.Tpo" "$(DEPDIR)/raidutil-parser.Po"; else rm -f "$(DEPDIR)/raidutil-parser.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parser.obj -MD -MP -MF $(DEPDIR)/raidutil-parser.Tpo -c -o raidutil-parser.obj `if test -f 'parser.cpp'; then $(CYGPATH_W) 'parser.cpp'; else $(CYGPATH_W) '$(srcdir)/parser.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parser.Tpo $(DEPDIR)/raidutil-parser.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parser.cpp' object='raidutil-parser.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parser.obj `if test -f 'parser.cpp'; then $(CYGPATH_W) 'parser.cpp'; else $(CYGPATH_W) '$(srcdir)/parser.cpp'; fi` ---- raidutils-0.0.6.orig/raidutil/taskctrl.cpp -+++ raidutils-0.0.6/raidutil/taskctrl.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 15 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-parserr.o: parserr.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parserr.o -MD -MP -MF "$(DEPDIR)/raidutil-parserr.Tpo" -c -o raidutil-parserr.o `test -f 'parserr.cpp' || echo '$(srcdir)/'`parserr.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parserr.Tpo" "$(DEPDIR)/raidutil-parserr.Po"; else rm -f "$(DEPDIR)/raidutil-parserr.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parserr.o -MD -MP -MF $(DEPDIR)/raidutil-parserr.Tpo -c -o raidutil-parserr.o `test -f 'parserr.cpp' || echo '$(srcdir)/'`parserr.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parserr.Tpo $(DEPDIR)/raidutil-parserr.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parserr.cpp' object='raidutil-parserr.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parserr.o `test -f 'parserr.cpp' || echo '$(srcdir)/'`parserr.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/scsiaddr.hpp -+++ raidutils-0.0.6/raidutil/scsiaddr.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 5 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:12 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-parserr.obj: parserr.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parserr.obj -MD -MP -MF "$(DEPDIR)/raidutil-parserr.Tpo" -c -o raidutil-parserr.obj `if test -f 'parserr.cpp'; then $(CYGPATH_W) 'parserr.cpp'; else $(CYGPATH_W) '$(srcdir)/parserr.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-parserr.Tpo" "$(DEPDIR)/raidutil-parserr.Po"; else rm -f "$(DEPDIR)/raidutil-parserr.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-parserr.obj -MD -MP -MF $(DEPDIR)/raidutil-parserr.Tpo -c -o raidutil-parserr.obj `if test -f 'parserr.cpp'; then $(CYGPATH_W) 'parserr.cpp'; else $(CYGPATH_W) '$(srcdir)/parserr.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-parserr.Tpo $(DEPDIR)/raidutil-parserr.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parserr.cpp' object='raidutil-parserr.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-parserr.obj `if test -f 'parserr.cpp'; then $(CYGPATH_W) 'parserr.cpp'; else $(CYGPATH_W) '$(srcdir)/parserr.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/cmdlist.cpp -+++ raidutils-0.0.6/raidutil/cmdlist.cpp -@@ -39,9 +39,12 @@ - solution in coding C++ without STL. - * Version Control: - * --* $Revision: 5 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-raidutil.o: raidutil.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-raidutil.o -MD -MP -MF "$(DEPDIR)/raidutil-raidutil.Tpo" -c -o raidutil-raidutil.o `test -f 'raidutil.cpp' || echo '$(srcdir)/'`raidutil.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-raidutil.Tpo" "$(DEPDIR)/raidutil-raidutil.Po"; else rm -f "$(DEPDIR)/raidutil-raidutil.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-raidutil.o -MD -MP -MF $(DEPDIR)/raidutil-raidutil.Tpo -c -o raidutil-raidutil.o `test -f 'raidutil.cpp' || echo '$(srcdir)/'`raidutil.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-raidutil.Tpo $(DEPDIR)/raidutil-raidutil.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='raidutil.cpp' object='raidutil-raidutil.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-raidutil.o `test -f 'raidutil.cpp' || echo '$(srcdir)/'`raidutil.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/dynsize.cpp -+++ raidutils-0.0.6/raidutil/dynsize.cpp -@@ -39,9 +39,12 @@ - * class. - * Version Control: - * --* $Revision: 3 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:13 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-raidutil.obj: raidutil.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-raidutil.obj -MD -MP -MF "$(DEPDIR)/raidutil-raidutil.Tpo" -c -o raidutil-raidutil.obj `if test -f 'raidutil.cpp'; then $(CYGPATH_W) 'raidutil.cpp'; else $(CYGPATH_W) '$(srcdir)/raidutil.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-raidutil.Tpo" "$(DEPDIR)/raidutil-raidutil.Po"; else rm -f "$(DEPDIR)/raidutil-raidutil.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-raidutil.obj -MD -MP -MF $(DEPDIR)/raidutil-raidutil.Tpo -c -o raidutil-raidutil.obj `if test -f 'raidutil.cpp'; then $(CYGPATH_W) 'raidutil.cpp'; else $(CYGPATH_W) '$(srcdir)/raidutil.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-raidutil.Tpo $(DEPDIR)/raidutil-raidutil.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='raidutil.cpp' object='raidutil-raidutil.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-raidutil.obj `if test -f 'raidutil.cpp'; then $(CYGPATH_W) 'raidutil.cpp'; else $(CYGPATH_W) '$(srcdir)/raidutil.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/forcest.cpp -+++ raidutils-0.0.6/raidutil/forcest.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 10 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:11 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-rawdata.o: rawdata.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rawdata.o -MD -MP -MF "$(DEPDIR)/raidutil-rawdata.Tpo" -c -o raidutil-rawdata.o `test -f 'rawdata.cpp' || echo '$(srcdir)/'`rawdata.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rawdata.Tpo" "$(DEPDIR)/raidutil-rawdata.Po"; else rm -f "$(DEPDIR)/raidutil-rawdata.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rawdata.o -MD -MP -MF $(DEPDIR)/raidutil-rawdata.Tpo -c -o raidutil-rawdata.o `test -f 'rawdata.cpp' || echo '$(srcdir)/'`rawdata.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rawdata.Tpo $(DEPDIR)/raidutil-rawdata.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rawdata.cpp' object='raidutil-rawdata.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rawdata.o `test -f 'rawdata.cpp' || echo '$(srcdir)/'`rawdata.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/rdutlosd.h -+++ raidutils-0.0.6/raidutil/rdutlosd.h -@@ -41,9 +41,12 @@ - * Description: This is the OS dependent constants, etc. for DptUtil. - * Version Control: - * --* $Revision: 2 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:11 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-rawdata.obj: rawdata.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rawdata.obj -MD -MP -MF "$(DEPDIR)/raidutil-rawdata.Tpo" -c -o raidutil-rawdata.obj `if test -f 'rawdata.cpp'; then $(CYGPATH_W) 'rawdata.cpp'; else $(CYGPATH_W) '$(srcdir)/rawdata.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rawdata.Tpo" "$(DEPDIR)/raidutil-rawdata.Po"; else rm -f "$(DEPDIR)/raidutil-rawdata.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rawdata.obj -MD -MP -MF $(DEPDIR)/raidutil-rawdata.Tpo -c -o raidutil-rawdata.obj `if test -f 'rawdata.cpp'; then $(CYGPATH_W) 'rawdata.cpp'; else $(CYGPATH_W) '$(srcdir)/rawdata.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rawdata.Tpo $(DEPDIR)/raidutil-rawdata.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rawdata.cpp' object='raidutil-rawdata.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rawdata.obj `if test -f 'rawdata.cpp'; then $(CYGPATH_W) 'rawdata.cpp'; else $(CYGPATH_W) '$(srcdir)/rawdata.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/dynsize.h -+++ raidutils-0.0.6/raidutil/dynsize.h -@@ -42,9 +42,12 @@ - * class. - * Version Control: - * --* $Revision: 2 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-05-05 12:41:44 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-rdutlosd.o: rdutlosd.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rdutlosd.o -MD -MP -MF "$(DEPDIR)/raidutil-rdutlosd.Tpo" -c -o raidutil-rdutlosd.o `test -f 'rdutlosd.cpp' || echo '$(srcdir)/'`rdutlosd.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rdutlosd.Tpo" "$(DEPDIR)/raidutil-rdutlosd.Po"; else rm -f "$(DEPDIR)/raidutil-rdutlosd.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rdutlosd.o -MD -MP -MF $(DEPDIR)/raidutil-rdutlosd.Tpo -c -o raidutil-rdutlosd.o `test -f 'rdutlosd.cpp' || echo '$(srcdir)/'`rdutlosd.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rdutlosd.Tpo $(DEPDIR)/raidutil-rdutlosd.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rdutlosd.cpp' object='raidutil-rdutlosd.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rdutlosd.o `test -f 'rdutlosd.cpp' || echo '$(srcdir)/'`rdutlosd.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/parserr.cpp -+++ raidutils-0.0.6/raidutil/parserr.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 5 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:13 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-rdutlosd.obj: rdutlosd.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rdutlosd.obj -MD -MP -MF "$(DEPDIR)/raidutil-rdutlosd.Tpo" -c -o raidutil-rdutlosd.obj `if test -f 'rdutlosd.cpp'; then $(CYGPATH_W) 'rdutlosd.cpp'; else $(CYGPATH_W) '$(srcdir)/rdutlosd.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rdutlosd.Tpo" "$(DEPDIR)/raidutil-rdutlosd.Po"; else rm -f "$(DEPDIR)/raidutil-rdutlosd.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rdutlosd.obj -MD -MP -MF $(DEPDIR)/raidutil-rdutlosd.Tpo -c -o raidutil-rdutlosd.obj `if test -f 'rdutlosd.cpp'; then $(CYGPATH_W) 'rdutlosd.cpp'; else $(CYGPATH_W) '$(srcdir)/rdutlosd.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rdutlosd.Tpo $(DEPDIR)/raidutil-rdutlosd.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rdutlosd.cpp' object='raidutil-rdutlosd.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rdutlosd.obj `if test -f 'rdutlosd.cpp'; then $(CYGPATH_W) 'rdutlosd.cpp'; else $(CYGPATH_W) '$(srcdir)/rdutlosd.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/scsilist.hpp -+++ raidutils-0.0.6/raidutil/scsilist.hpp -@@ -42,9 +42,12 @@ - addresses. - * Version Control: - * --* $Revision: 7 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:11 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-rmwflash.o: rmwflash.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rmwflash.o -MD -MP -MF "$(DEPDIR)/raidutil-rmwflash.Tpo" -c -o raidutil-rmwflash.o `test -f 'rmwflash.cpp' || echo '$(srcdir)/'`rmwflash.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rmwflash.Tpo" "$(DEPDIR)/raidutil-rmwflash.Po"; else rm -f "$(DEPDIR)/raidutil-rmwflash.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rmwflash.o -MD -MP -MF $(DEPDIR)/raidutil-rmwflash.Tpo -c -o raidutil-rmwflash.o `test -f 'rmwflash.cpp' || echo '$(srcdir)/'`rmwflash.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rmwflash.Tpo $(DEPDIR)/raidutil-rmwflash.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rmwflash.cpp' object='raidutil-rmwflash.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rmwflash.o `test -f 'rmwflash.cpp' || echo '$(srcdir)/'`rmwflash.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/eventlog.hpp -+++ raidutils-0.0.6/raidutil/eventlog.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 7 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch -+* - *****************************************************************************/ + raidutil-rmwflash.obj: rmwflash.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rmwflash.obj -MD -MP -MF "$(DEPDIR)/raidutil-rmwflash.Tpo" -c -o raidutil-rmwflash.obj `if test -f 'rmwflash.cpp'; then $(CYGPATH_W) 'rmwflash.cpp'; else $(CYGPATH_W) '$(srcdir)/rmwflash.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rmwflash.Tpo" "$(DEPDIR)/raidutil-rmwflash.Po"; else rm -f "$(DEPDIR)/raidutil-rmwflash.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rmwflash.obj -MD -MP -MF $(DEPDIR)/raidutil-rmwflash.Tpo -c -o raidutil-rmwflash.obj `if test -f 'rmwflash.cpp'; then $(CYGPATH_W) 'rmwflash.cpp'; else $(CYGPATH_W) '$(srcdir)/rmwflash.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rmwflash.Tpo $(DEPDIR)/raidutil-rmwflash.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rmwflash.cpp' object='raidutil-rmwflash.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rmwflash.obj `if test -f 'rmwflash.cpp'; then $(CYGPATH_W) 'rmwflash.cpp'; else $(CYGPATH_W) '$(srcdir)/rmwflash.cpp'; fi` - /*** INCLUDES ***/ -@@ -77,7 +80,7 @@ class EventLog:public Command - { + raidutil-rstnvram.o: rstnvram.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rstnvram.o -MD -MP -MF "$(DEPDIR)/raidutil-rstnvram.Tpo" -c -o raidutil-rstnvram.o `test -f 'rstnvram.cpp' || echo '$(srcdir)/'`rstnvram.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rstnvram.Tpo" "$(DEPDIR)/raidutil-rstnvram.Po"; else rm -f "$(DEPDIR)/raidutil-rstnvram.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rstnvram.o -MD -MP -MF $(DEPDIR)/raidutil-rstnvram.Tpo -c -o raidutil-rstnvram.o `test -f 'rstnvram.cpp' || echo '$(srcdir)/'`rstnvram.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rstnvram.Tpo $(DEPDIR)/raidutil-rstnvram.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rstnvram.cpp' object='raidutil-rstnvram.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rstnvram.o `test -f 'rstnvram.cpp' || echo '$(srcdir)/'`rstnvram.cpp - public: -- EventLog::EventLog(SCSI_Addr_List *deviceList, -+ EventLog(SCSI_Addr_List *deviceList, - EventLogOptions cmd); - EventLog(const EventLog &new_EventLog); - virtual ~EventLog(); ---- raidutils-0.0.6.orig/raidutil/uartdmp.cpp -+++ raidutils-0.0.6/raidutil/uartdmp.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 9 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-rstnvram.obj: rstnvram.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rstnvram.obj -MD -MP -MF "$(DEPDIR)/raidutil-rstnvram.Tpo" -c -o raidutil-rstnvram.obj `if test -f 'rstnvram.cpp'; then $(CYGPATH_W) 'rstnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/rstnvram.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-rstnvram.Tpo" "$(DEPDIR)/raidutil-rstnvram.Po"; else rm -f "$(DEPDIR)/raidutil-rstnvram.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-rstnvram.obj -MD -MP -MF $(DEPDIR)/raidutil-rstnvram.Tpo -c -o raidutil-rstnvram.obj `if test -f 'rstnvram.cpp'; then $(CYGPATH_W) 'rstnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/rstnvram.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-rstnvram.Tpo $(DEPDIR)/raidutil-rstnvram.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='rstnvram.cpp' object='raidutil-rstnvram.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-rstnvram.obj `if test -f 'rstnvram.cpp'; then $(CYGPATH_W) 'rstnvram.cpp'; else $(CYGPATH_W) '$(srcdir)/rstnvram.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/expand.cpp -+++ raidutils-0.0.6/raidutil/expand.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 4 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:11 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-scsilist.o: scsilist.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-scsilist.o -MD -MP -MF "$(DEPDIR)/raidutil-scsilist.Tpo" -c -o raidutil-scsilist.o `test -f 'scsilist.cpp' || echo '$(srcdir)/'`scsilist.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-scsilist.Tpo" "$(DEPDIR)/raidutil-scsilist.Po"; else rm -f "$(DEPDIR)/raidutil-scsilist.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-scsilist.o -MD -MP -MF $(DEPDIR)/raidutil-scsilist.Tpo -c -o raidutil-scsilist.o `test -f 'scsilist.cpp' || echo '$(srcdir)/'`scsilist.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-scsilist.Tpo $(DEPDIR)/raidutil-scsilist.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='scsilist.cpp' object='raidutil-scsilist.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-scsilist.o `test -f 'scsilist.cpp' || echo '$(srcdir)/'`scsilist.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/intlist.hpp -+++ raidutils-0.0.6/raidutil/intlist.hpp -@@ -41,9 +41,12 @@ - * Description: This file serves as a container class, holding a list of items. - * Version Control: - * --* $Revision: 7 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-scsilist.obj: scsilist.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-scsilist.obj -MD -MP -MF "$(DEPDIR)/raidutil-scsilist.Tpo" -c -o raidutil-scsilist.obj `if test -f 'scsilist.cpp'; then $(CYGPATH_W) 'scsilist.cpp'; else $(CYGPATH_W) '$(srcdir)/scsilist.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-scsilist.Tpo" "$(DEPDIR)/raidutil-scsilist.Po"; else rm -f "$(DEPDIR)/raidutil-scsilist.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-scsilist.obj -MD -MP -MF $(DEPDIR)/raidutil-scsilist.Tpo -c -o raidutil-scsilist.obj `if test -f 'scsilist.cpp'; then $(CYGPATH_W) 'scsilist.cpp'; else $(CYGPATH_W) '$(srcdir)/scsilist.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-scsilist.Tpo $(DEPDIR)/raidutil-scsilist.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='scsilist.cpp' object='raidutil-scsilist.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-scsilist.obj `if test -f 'scsilist.cpp'; then $(CYGPATH_W) 'scsilist.cpp'; else $(CYGPATH_W) '$(srcdir)/scsilist.cpp'; fi` + + raidutil-setcache.o: setcache.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setcache.o -MD -MP -MF "$(DEPDIR)/raidutil-setcache.Tpo" -c -o raidutil-setcache.o `test -f 'setcache.cpp' || echo '$(srcdir)/'`setcache.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setcache.Tpo" "$(DEPDIR)/raidutil-setcache.Po"; else rm -f "$(DEPDIR)/raidutil-setcache.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setcache.o -MD -MP -MF $(DEPDIR)/raidutil-setcache.Tpo -c -o raidutil-setcache.o `test -f 'setcache.cpp' || echo '$(srcdir)/'`setcache.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setcache.Tpo $(DEPDIR)/raidutil-setcache.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setcache.cpp' object='raidutil-setcache.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setcache.o `test -f 'setcache.cpp' || echo '$(srcdir)/'`setcache.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/rstnvram.cpp -+++ raidutils-0.0.6/raidutil/rstnvram.cpp -@@ -39,9 +39,12 @@ - * Description: - * Version Control: - * --* $Revision: 12 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-setcache.obj: setcache.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setcache.obj -MD -MP -MF "$(DEPDIR)/raidutil-setcache.Tpo" -c -o raidutil-setcache.obj `if test -f 'setcache.cpp'; then $(CYGPATH_W) 'setcache.cpp'; else $(CYGPATH_W) '$(srcdir)/setcache.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setcache.Tpo" "$(DEPDIR)/raidutil-setcache.Po"; else rm -f "$(DEPDIR)/raidutil-setcache.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setcache.obj -MD -MP -MF $(DEPDIR)/raidutil-setcache.Tpo -c -o raidutil-setcache.obj `if test -f 'setcache.cpp'; then $(CYGPATH_W) 'setcache.cpp'; else $(CYGPATH_W) '$(srcdir)/setcache.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setcache.Tpo $(DEPDIR)/raidutil-setcache.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setcache.cpp' object='raidutil-setcache.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setcache.obj `if test -f 'setcache.cpp'; then $(CYGPATH_W) 'setcache.cpp'; else $(CYGPATH_W) '$(srcdir)/setcache.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/setcache.cpp -+++ raidutils-0.0.6/raidutil/setcache.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 17 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:13 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-setrate.o: setrate.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setrate.o -MD -MP -MF "$(DEPDIR)/raidutil-setrate.Tpo" -c -o raidutil-setrate.o `test -f 'setrate.cpp' || echo '$(srcdir)/'`setrate.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setrate.Tpo" "$(DEPDIR)/raidutil-setrate.Po"; else rm -f "$(DEPDIR)/raidutil-setrate.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setrate.o -MD -MP -MF $(DEPDIR)/raidutil-setrate.Tpo -c -o raidutil-setrate.o `test -f 'setrate.cpp' || echo '$(srcdir)/'`setrate.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setrate.Tpo $(DEPDIR)/raidutil-setrate.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setrate.cpp' object='raidutil-setrate.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setrate.o `test -f 'setrate.cpp' || echo '$(srcdir)/'`setrate.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/creatrad.cpp -+++ raidutils-0.0.6/raidutil/creatrad.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 45 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:12 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-setrate.obj: setrate.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setrate.obj -MD -MP -MF "$(DEPDIR)/raidutil-setrate.Tpo" -c -o raidutil-setrate.obj `if test -f 'setrate.cpp'; then $(CYGPATH_W) 'setrate.cpp'; else $(CYGPATH_W) '$(srcdir)/setrate.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setrate.Tpo" "$(DEPDIR)/raidutil-setrate.Po"; else rm -f "$(DEPDIR)/raidutil-setrate.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setrate.obj -MD -MP -MF $(DEPDIR)/raidutil-setrate.Tpo -c -o raidutil-setrate.obj `if test -f 'setrate.cpp'; then $(CYGPATH_W) 'setrate.cpp'; else $(CYGPATH_W) '$(srcdir)/setrate.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setrate.Tpo $(DEPDIR)/raidutil-setrate.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setrate.cpp' object='raidutil-setrate.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setrate.obj `if test -f 'setrate.cpp'; then $(CYGPATH_W) 'setrate.cpp'; else $(CYGPATH_W) '$(srcdir)/setrate.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/parsargv.cpp -+++ raidutils-0.0.6/raidutil/parsargv.cpp -@@ -40,9 +40,12 @@ - ctor to construct that. - * Version Control: - * --* $Revision: 6 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:12 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-setspeed.o: setspeed.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setspeed.o -MD -MP -MF "$(DEPDIR)/raidutil-setspeed.Tpo" -c -o raidutil-setspeed.o `test -f 'setspeed.cpp' || echo '$(srcdir)/'`setspeed.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setspeed.Tpo" "$(DEPDIR)/raidutil-setspeed.Po"; else rm -f "$(DEPDIR)/raidutil-setspeed.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setspeed.o -MD -MP -MF $(DEPDIR)/raidutil-setspeed.Tpo -c -o raidutil-setspeed.o `test -f 'setspeed.cpp' || echo '$(srcdir)/'`setspeed.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setspeed.Tpo $(DEPDIR)/raidutil-setspeed.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setspeed.cpp' object='raidutil-setspeed.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setspeed.o `test -f 'setspeed.cpp' || echo '$(srcdir)/'`setspeed.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/debug.hpp -+++ raidutils-0.0.6/raidutil/debug.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 1 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-setspeed.obj: setspeed.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setspeed.obj -MD -MP -MF "$(DEPDIR)/raidutil-setspeed.Tpo" -c -o raidutil-setspeed.obj `if test -f 'setspeed.cpp'; then $(CYGPATH_W) 'setspeed.cpp'; else $(CYGPATH_W) '$(srcdir)/setspeed.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setspeed.Tpo" "$(DEPDIR)/raidutil-setspeed.Po"; else rm -f "$(DEPDIR)/raidutil-setspeed.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setspeed.obj -MD -MP -MF $(DEPDIR)/raidutil-setspeed.Tpo -c -o raidutil-setspeed.obj `if test -f 'setspeed.cpp'; then $(CYGPATH_W) 'setspeed.cpp'; else $(CYGPATH_W) '$(srcdir)/setspeed.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setspeed.Tpo $(DEPDIR)/raidutil-setspeed.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setspeed.cpp' object='raidutil-setspeed.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setspeed.obj `if test -f 'setspeed.cpp'; then $(CYGPATH_W) 'setspeed.cpp'; else $(CYGPATH_W) '$(srcdir)/setspeed.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/command.hpp -+++ raidutils-0.0.6/raidutil/command.hpp -@@ -44,9 +44,12 @@ - * gathered by the derived object. - * Version Control: - * --* $Revision: 37 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:11 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-showinq.o: showinq.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-showinq.o -MD -MP -MF "$(DEPDIR)/raidutil-showinq.Tpo" -c -o raidutil-showinq.o `test -f 'showinq.cpp' || echo '$(srcdir)/'`showinq.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-showinq.Tpo" "$(DEPDIR)/raidutil-showinq.Po"; else rm -f "$(DEPDIR)/raidutil-showinq.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-showinq.o -MD -MP -MF $(DEPDIR)/raidutil-showinq.Tpo -c -o raidutil-showinq.o `test -f 'showinq.cpp' || echo '$(srcdir)/'`showinq.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-showinq.Tpo $(DEPDIR)/raidutil-showinq.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='showinq.cpp' object='raidutil-showinq.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-showinq.o `test -f 'showinq.cpp' || echo '$(srcdir)/'`showinq.cpp - /*** INCLUDES ***/ -@@ -259,7 +262,7 @@ class Command - DPT_ERR_FWD_NOT_INITIALIZED = ERR_FWD_NOT_INITIALIZED, - DPT_ERR_FWD_BLK_MISMATCH = ERR_FWD_BLK_MISMATCH, - DPT_ERR_FWD_BLK_OVERFLOW = ERR_FWD_BLK_OVERFLOW, -- DPT_ERR_RSV_REMOVEABLE = ERR_RSV_REMOVEABLE, -+ DPT_ERR_RSV_REMOVABLE = ERR_RSV_REMOVABLE, - DPT_ERR_RSV_NOT_DASD = ERR_RSV_NOT_DASD, - DPT_ERR_RSV_NON_ZERO = ERR_RSV_NON_ZERO, - DPT_ERR_RSV_HBA_UNABLE = ERR_RSV_HBA_UNABLE, ---- raidutils-0.0.6.orig/raidutil/eventlog.cpp -+++ raidutils-0.0.6/raidutil/eventlog.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 42 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:13 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-showinq.obj: showinq.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-showinq.obj -MD -MP -MF "$(DEPDIR)/raidutil-showinq.Tpo" -c -o raidutil-showinq.obj `if test -f 'showinq.cpp'; then $(CYGPATH_W) 'showinq.cpp'; else $(CYGPATH_W) '$(srcdir)/showinq.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-showinq.Tpo" "$(DEPDIR)/raidutil-showinq.Po"; else rm -f "$(DEPDIR)/raidutil-showinq.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-showinq.obj -MD -MP -MF $(DEPDIR)/raidutil-showinq.Tpo -c -o raidutil-showinq.obj `if test -f 'showinq.cpp'; then $(CYGPATH_W) 'showinq.cpp'; else $(CYGPATH_W) '$(srcdir)/showinq.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-showinq.Tpo $(DEPDIR)/raidutil-showinq.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='showinq.cpp' object='raidutil-showinq.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-showinq.obj `if test -f 'showinq.cpp'; then $(CYGPATH_W) 'showinq.cpp'; else $(CYGPATH_W) '$(srcdir)/showinq.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/showinq.cpp -+++ raidutils-0.0.6/raidutil/showinq.cpp -@@ -39,9 +39,12 @@ - passed in. - * Version Control: - * --* $Revision: 13 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-status.o: status.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-status.o -MD -MP -MF "$(DEPDIR)/raidutil-status.Tpo" -c -o raidutil-status.o `test -f 'status.cpp' || echo '$(srcdir)/'`status.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-status.Tpo" "$(DEPDIR)/raidutil-status.Po"; else rm -f "$(DEPDIR)/raidutil-status.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-status.o -MD -MP -MF $(DEPDIR)/raidutil-status.Tpo -c -o raidutil-status.o `test -f 'status.cpp' || echo '$(srcdir)/'`status.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-status.Tpo $(DEPDIR)/raidutil-status.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='status.cpp' object='raidutil-status.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-status.o `test -f 'status.cpp' || echo '$(srcdir)/'`status.cpp - /*** INCLUDES ***/ -@@ -215,7 +218,7 @@ SHOW_PHYSICAL: - output.add_Item( "\n" ); - output.add_Item(EventStrings[STR_REMOVABLE]); - output.add_Item( ":" ); -- output.add_Item( ( engine->devInfo_P->flags & FLG_DEV_REMOVEABLE)? EventStrings[STR_YES]:EventStrings[STR_NO]); -+ output.add_Item( ( engine->devInfo_P->flags & FLG_DEV_REMOVABLE)? EventStrings[STR_YES]:EventStrings[STR_NO]); - output.add_Item( "\n" ); - break; + raidutil-status.obj: status.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-status.obj -MD -MP -MF "$(DEPDIR)/raidutil-status.Tpo" -c -o raidutil-status.obj `if test -f 'status.cpp'; then $(CYGPATH_W) 'status.cpp'; else $(CYGPATH_W) '$(srcdir)/status.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-status.Tpo" "$(DEPDIR)/raidutil-status.Po"; else rm -f "$(DEPDIR)/raidutil-status.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-status.obj -MD -MP -MF $(DEPDIR)/raidutil-status.Tpo -c -o raidutil-status.obj `if test -f 'status.cpp'; then $(CYGPATH_W) 'status.cpp'; else $(CYGPATH_W) '$(srcdir)/status.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-status.Tpo $(DEPDIR)/raidutil-status.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='status.cpp' object='raidutil-status.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-status.obj `if test -f 'status.cpp'; then $(CYGPATH_W) 'status.cpp'; else $(CYGPATH_W) '$(srcdir)/status.cpp'; fi` -@@ -317,7 +320,7 @@ SHOW_PHYSICAL: - output.add_Item( ":" ); - output.add_Item( obj_Type_Str ); - output.add_Item( "\n" ); -- // output.add_Item( ( engine->devInfo_P->flags & FLG_DEV_REMOVEABLE )? STR_YES:STR_NO ); -+ // output.add_Item( ( engine->devInfo_P->flags & FLG_DEV_REMOVABLE )? STR_YES:STR_NO ); - output.add_Item( "\n" ); - } - break; ---- raidutils-0.0.6.orig/raidutil/command.cpp -+++ raidutils-0.0.6/raidutil/command.cpp -@@ -41,9 +41,12 @@ - gathered by the derived object. - * Version Control: - * --* $Revision: 45 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-strlist.o: strlist.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-strlist.o -MD -MP -MF "$(DEPDIR)/raidutil-strlist.Tpo" -c -o raidutil-strlist.o `test -f 'strlist.cpp' || echo '$(srcdir)/'`strlist.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-strlist.Tpo" "$(DEPDIR)/raidutil-strlist.Po"; else rm -f "$(DEPDIR)/raidutil-strlist.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-strlist.o -MD -MP -MF $(DEPDIR)/raidutil-strlist.Tpo -c -o raidutil-strlist.o `test -f 'strlist.cpp' || echo '$(srcdir)/'`strlist.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-strlist.Tpo $(DEPDIR)/raidutil-strlist.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strlist.cpp' object='raidutil-strlist.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-strlist.o `test -f 'strlist.cpp' || echo '$(srcdir)/'`strlist.cpp - /*** INCLUDES ***/ -@@ -600,8 +603,8 @@ Command::Dpt_Error::operator char *() - constant_Str = EventStrings[STR_ERR_FWD_BLK_OVERFLOW]; - break; + raidutil-strlist.obj: strlist.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-strlist.obj -MD -MP -MF "$(DEPDIR)/raidutil-strlist.Tpo" -c -o raidutil-strlist.obj `if test -f 'strlist.cpp'; then $(CYGPATH_W) 'strlist.cpp'; else $(CYGPATH_W) '$(srcdir)/strlist.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-strlist.Tpo" "$(DEPDIR)/raidutil-strlist.Po"; else rm -f "$(DEPDIR)/raidutil-strlist.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-strlist.obj -MD -MP -MF $(DEPDIR)/raidutil-strlist.Tpo -c -o raidutil-strlist.obj `if test -f 'strlist.cpp'; then $(CYGPATH_W) 'strlist.cpp'; else $(CYGPATH_W) '$(srcdir)/strlist.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-strlist.Tpo $(DEPDIR)/raidutil-strlist.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strlist.cpp' object='raidutil-strlist.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-strlist.obj `if test -f 'strlist.cpp'; then $(CYGPATH_W) 'strlist.cpp'; else $(CYGPATH_W) '$(srcdir)/strlist.cpp'; fi` -- case DPT_ERR_RSV_REMOVEABLE: -- constant_Str = EventStrings[STR_ERR_RSV_REMOVEABLE]; -+ case DPT_ERR_RSV_REMOVABLE: -+ constant_Str = EventStrings[STR_ERR_RSV_REMOVABLE]; - break; + raidutil-taskctrl.o: taskctrl.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-taskctrl.o -MD -MP -MF "$(DEPDIR)/raidutil-taskctrl.Tpo" -c -o raidutil-taskctrl.o `test -f 'taskctrl.cpp' || echo '$(srcdir)/'`taskctrl.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-taskctrl.Tpo" "$(DEPDIR)/raidutil-taskctrl.Po"; else rm -f "$(DEPDIR)/raidutil-taskctrl.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-taskctrl.o -MD -MP -MF $(DEPDIR)/raidutil-taskctrl.Tpo -c -o raidutil-taskctrl.o `test -f 'taskctrl.cpp' || echo '$(srcdir)/'`taskctrl.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-taskctrl.Tpo $(DEPDIR)/raidutil-taskctrl.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='taskctrl.cpp' object='raidutil-taskctrl.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-taskctrl.o `test -f 'taskctrl.cpp' || echo '$(srcdir)/'`taskctrl.cpp - case DPT_ERR_RSV_NOT_DASD: -@@ -2237,13 +2240,6 @@ void Command::MakeArrayOptimal(DPT_TAG_T - } + raidutil-taskctrl.obj: taskctrl.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-taskctrl.obj -MD -MP -MF "$(DEPDIR)/raidutil-taskctrl.Tpo" -c -o raidutil-taskctrl.obj `if test -f 'taskctrl.cpp'; then $(CYGPATH_W) 'taskctrl.cpp'; else $(CYGPATH_W) '$(srcdir)/taskctrl.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-taskctrl.Tpo" "$(DEPDIR)/raidutil-taskctrl.Po"; else rm -f "$(DEPDIR)/raidutil-taskctrl.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-taskctrl.obj -MD -MP -MF $(DEPDIR)/raidutil-taskctrl.Tpo -c -o raidutil-taskctrl.obj `if test -f 'taskctrl.cpp'; then $(CYGPATH_W) 'taskctrl.cpp'; else $(CYGPATH_W) '$(srcdir)/taskctrl.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-taskctrl.Tpo $(DEPDIR)/raidutil-taskctrl.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='taskctrl.cpp' object='raidutil-taskctrl.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-taskctrl.obj `if test -f 'taskctrl.cpp'; then $(CYGPATH_W) 'taskctrl.cpp'; else $(CYGPATH_W) '$(srcdir)/taskctrl.cpp'; fi` + raidutil-uartdmp.o: uartdmp.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-uartdmp.o -MD -MP -MF "$(DEPDIR)/raidutil-uartdmp.Tpo" -c -o raidutil-uartdmp.o `test -f 'uartdmp.cpp' || echo '$(srcdir)/'`uartdmp.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-uartdmp.Tpo" "$(DEPDIR)/raidutil-uartdmp.Po"; else rm -f "$(DEPDIR)/raidutil-uartdmp.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-uartdmp.o -MD -MP -MF $(DEPDIR)/raidutil-uartdmp.Tpo -c -o raidutil-uartdmp.o `test -f 'uartdmp.cpp' || echo '$(srcdir)/'`uartdmp.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-uartdmp.Tpo $(DEPDIR)/raidutil-uartdmp.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='uartdmp.cpp' object='raidutil-uartdmp.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-uartdmp.o `test -f 'uartdmp.cpp' || echo '$(srcdir)/'`uartdmp.cpp --#ifdef sparc --# define VOLATILE volatile --#else --# define VOLATILE --#endif -- --extern "C" { VOLATILE void exit (int);} + raidutil-uartdmp.obj: uartdmp.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-uartdmp.obj -MD -MP -MF "$(DEPDIR)/raidutil-uartdmp.Tpo" -c -o raidutil-uartdmp.obj `if test -f 'uartdmp.cpp'; then $(CYGPATH_W) 'uartdmp.cpp'; else $(CYGPATH_W) '$(srcdir)/uartdmp.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-uartdmp.Tpo" "$(DEPDIR)/raidutil-uartdmp.Po"; else rm -f "$(DEPDIR)/raidutil-uartdmp.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-uartdmp.obj -MD -MP -MF $(DEPDIR)/raidutil-uartdmp.Tpo -c -o raidutil-uartdmp.obj `if test -f 'uartdmp.cpp'; then $(CYGPATH_W) 'uartdmp.cpp'; else $(CYGPATH_W) '$(srcdir)/uartdmp.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-uartdmp.Tpo $(DEPDIR)/raidutil-uartdmp.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='uartdmp.cpp' object='raidutil-uartdmp.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-uartdmp.obj `if test -f 'uartdmp.cpp'; then $(CYGPATH_W) 'uartdmp.cpp'; else $(CYGPATH_W) '$(srcdir)/uartdmp.cpp'; fi` - void Command::Init_Engine(int scanHbasOnly) - { ---- raidutils-0.0.6.orig/raidutil/parser.hpp -+++ raidutils-0.0.6/raidutil/parser.hpp -@@ -43,9 +43,12 @@ - This array can then be fetched and executed. - * Version Control: - * --* $Revision: 9 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-usage.o: usage.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-usage.o -MD -MP -MF "$(DEPDIR)/raidutil-usage.Tpo" -c -o raidutil-usage.o `test -f 'usage.cpp' || echo '$(srcdir)/'`usage.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-usage.Tpo" "$(DEPDIR)/raidutil-usage.Po"; else rm -f "$(DEPDIR)/raidutil-usage.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-usage.o -MD -MP -MF $(DEPDIR)/raidutil-usage.Tpo -c -o raidutil-usage.o `test -f 'usage.cpp' || echo '$(srcdir)/'`usage.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-usage.Tpo $(DEPDIR)/raidutil-usage.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='usage.cpp' object='raidutil-usage.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-usage.o `test -f 'usage.cpp' || echo '$(srcdir)/'`usage.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/setcache.hpp -+++ raidutils-0.0.6/raidutil/setcache.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 1 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch -+* - *****************************************************************************/ + raidutil-usage.obj: usage.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-usage.obj -MD -MP -MF "$(DEPDIR)/raidutil-usage.Tpo" -c -o raidutil-usage.obj `if test -f 'usage.cpp'; then $(CYGPATH_W) 'usage.cpp'; else $(CYGPATH_W) '$(srcdir)/usage.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-usage.Tpo" "$(DEPDIR)/raidutil-usage.Po"; else rm -f "$(DEPDIR)/raidutil-usage.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-usage.obj -MD -MP -MF $(DEPDIR)/raidutil-usage.Tpo -c -o raidutil-usage.obj `if test -f 'usage.cpp'; then $(CYGPATH_W) 'usage.cpp'; else $(CYGPATH_W) '$(srcdir)/usage.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-usage.Tpo $(DEPDIR)/raidutil-usage.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='usage.cpp' object='raidutil-usage.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-usage.obj `if test -f 'usage.cpp'; then $(CYGPATH_W) 'usage.cpp'; else $(CYGPATH_W) '$(srcdir)/usage.cpp'; fi` - /*** INCLUDES ***/ -@@ -55,11 +58,11 @@ - class SetCache:public Command - { - public: -- SetCache::SetCache( -- SCSI_Addr_List *addresses, // a list of addresses -- int on, // Whether to enable or disable -- int rw // Read or write cacheing. -- ); // to delete raid tables on -+ SetCache( -+ SCSI_Addr_List *addresses, // a list of addresses -+ int on, // Whether to enable or disable -+ int rw // Read or write cacheing. -+ ); // to delete raid tables on - SetCache( const SetCache &new_SetCache ); - virtual ~SetCache(); - SetCache &operator = ( SetCache &right ); ---- raidutils-0.0.6.orig/raidutil/raidutil.cpp -+++ raidutils-0.0.6/raidutil/raidutil.cpp -@@ -39,9 +39,12 @@ - * Description: - * Version Control: - * --* $Revision: 123 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-zap.o: zap.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-zap.o -MD -MP -MF "$(DEPDIR)/raidutil-zap.Tpo" -c -o raidutil-zap.o `test -f 'zap.cpp' || echo '$(srcdir)/'`zap.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-zap.Tpo" "$(DEPDIR)/raidutil-zap.Po"; else rm -f "$(DEPDIR)/raidutil-zap.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-zap.o -MD -MP -MF $(DEPDIR)/raidutil-zap.Tpo -c -o raidutil-zap.o `test -f 'zap.cpp' || echo '$(srcdir)/'`zap.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-zap.Tpo $(DEPDIR)/raidutil-zap.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='zap.cpp' object='raidutil-zap.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-zap.o `test -f 'zap.cpp' || echo '$(srcdir)/'`zap.cpp - /*** INCLUDES ***/ -@@ -368,7 +371,7 @@ void Flush ( String_List * output ) - bool pageMode = mode.GetPagenationMode(); + raidutil-zap.obj: zap.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-zap.obj -MD -MP -MF "$(DEPDIR)/raidutil-zap.Tpo" -c -o raidutil-zap.obj `if test -f 'zap.cpp'; then $(CYGPATH_W) 'zap.cpp'; else $(CYGPATH_W) '$(srcdir)/zap.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-zap.Tpo" "$(DEPDIR)/raidutil-zap.Po"; else rm -f "$(DEPDIR)/raidutil-zap.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-zap.obj -MD -MP -MF $(DEPDIR)/raidutil-zap.Tpo -c -o raidutil-zap.obj `if test -f 'zap.cpp'; then $(CYGPATH_W) 'zap.cpp'; else $(CYGPATH_W) '$(srcdir)/zap.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-zap.Tpo $(DEPDIR)/raidutil-zap.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='zap.cpp' object='raidutil-zap.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-zap.obj `if test -f 'zap.cpp'; then $(CYGPATH_W) 'zap.cpp'; else $(CYGPATH_W) '$(srcdir)/zap.cpp'; fi` - // loop through the items in this command and display them -- while( out_Str = output->get_Next_Item() ) -+ while( (out_Str = output->get_Next_Item()) ) - { - char temp_Buf[ 512 ]; - char stripped_Str[ 160 ]; ---- raidutils-0.0.6.orig/raidutil/rustring.h -+++ raidutils-0.0.6/raidutil/rustring.h -@@ -41,9 +41,12 @@ - * Description: English Language Strings for DptUtil - * Version Control: - * --* $Revision: 79 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:15 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-setscfg.o: setscfg.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setscfg.o -MD -MP -MF "$(DEPDIR)/raidutil-setscfg.Tpo" -c -o raidutil-setscfg.o `test -f 'setscfg.cpp' || echo '$(srcdir)/'`setscfg.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setscfg.Tpo" "$(DEPDIR)/raidutil-setscfg.Po"; else rm -f "$(DEPDIR)/raidutil-setscfg.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setscfg.o -MD -MP -MF $(DEPDIR)/raidutil-setscfg.Tpo -c -o raidutil-setscfg.o `test -f 'setscfg.cpp' || echo '$(srcdir)/'`setscfg.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setscfg.Tpo $(DEPDIR)/raidutil-setscfg.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setscfg.cpp' object='raidutil-setscfg.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setscfg.o `test -f 'setscfg.cpp' || echo '$(srcdir)/'`setscfg.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/scsilist.cpp -+++ raidutils-0.0.6/raidutil/scsilist.cpp -@@ -39,9 +39,12 @@ - solution in coding C++ without STL. - * Version Control: - * --* $Revision: 8 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-setscfg.obj: setscfg.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setscfg.obj -MD -MP -MF "$(DEPDIR)/raidutil-setscfg.Tpo" -c -o raidutil-setscfg.obj `if test -f 'setscfg.cpp'; then $(CYGPATH_W) 'setscfg.cpp'; else $(CYGPATH_W) '$(srcdir)/setscfg.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-setscfg.Tpo" "$(DEPDIR)/raidutil-setscfg.Po"; else rm -f "$(DEPDIR)/raidutil-setscfg.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-setscfg.obj -MD -MP -MF $(DEPDIR)/raidutil-setscfg.Tpo -c -o raidutil-setscfg.obj `if test -f 'setscfg.cpp'; then $(CYGPATH_W) 'setscfg.cpp'; else $(CYGPATH_W) '$(srcdir)/setscfg.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-setscfg.Tpo $(DEPDIR)/raidutil-setscfg.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='setscfg.cpp' object='raidutil-setscfg.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-setscfg.obj `if test -f 'setscfg.cpp'; then $(CYGPATH_W) 'setscfg.cpp'; else $(CYGPATH_W) '$(srcdir)/setscfg.cpp'; fi` - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/usage.hpp -+++ raidutils-0.0.6/raidutil/usage.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 3 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:11 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-segment.o: segment.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-segment.o -MD -MP -MF "$(DEPDIR)/raidutil-segment.Tpo" -c -o raidutil-segment.o `test -f 'segment.cpp' || echo '$(srcdir)/'`segment.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-segment.Tpo" "$(DEPDIR)/raidutil-segment.Po"; else rm -f "$(DEPDIR)/raidutil-segment.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-segment.o -MD -MP -MF $(DEPDIR)/raidutil-segment.Tpo -c -o raidutil-segment.o `test -f 'segment.cpp' || echo '$(srcdir)/'`segment.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-segment.Tpo $(DEPDIR)/raidutil-segment.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='segment.cpp' object='raidutil-segment.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-segment.o `test -f 'segment.cpp' || echo '$(srcdir)/'`segment.cpp - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/modnvram.cpp -+++ raidutils-0.0.6/raidutil/modnvram.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 6 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + raidutil-segment.obj: segment.cpp +-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-segment.obj -MD -MP -MF "$(DEPDIR)/raidutil-segment.Tpo" -c -o raidutil-segment.obj `if test -f 'segment.cpp'; then $(CYGPATH_W) 'segment.cpp'; else $(CYGPATH_W) '$(srcdir)/segment.cpp'; fi`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/raidutil-segment.Tpo" "$(DEPDIR)/raidutil-segment.Po"; else rm -f "$(DEPDIR)/raidutil-segment.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT raidutil-segment.obj -MD -MP -MF $(DEPDIR)/raidutil-segment.Tpo -c -o raidutil-segment.obj `if test -f 'segment.cpp'; then $(CYGPATH_W) 'segment.cpp'; else $(CYGPATH_W) '$(srcdir)/segment.cpp'; fi` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/raidutil-segment.Tpo $(DEPDIR)/raidutil-segment.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='segment.cpp' object='raidutil-segment.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(raidutil_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o raidutil-segment.obj `if test -f 'segment.cpp'; then $(CYGPATH_W) 'segment.cpp'; else $(CYGPATH_W) '$(srcdir)/segment.cpp'; fi` +@@ -979,82 +1014,85 @@ mostlyclean-libtool: + clean-libtool: + -rm -rf .libs _libs - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/parser.cpp -+++ raidutils-0.0.6/raidutil/parser.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 101 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:12 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ +-distclean-libtool: +- -rm -f libtool +-uninstall-info-am: +- + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique + tags: TAGS - /*** INCLUDES ***/ -@@ -730,6 +733,7 @@ DELETE_HOT_SPARE: - { - EventLog *temp = new EventLog (components, eventLogOpts); - cmd_List->add_Item (*temp); -+ delete temp; - } - else - Error_in_Parsing(EventStrings[STR_PARSE_ERR_MUST_SPECIFY_ADDRESS], this_Commands_Text); -@@ -1645,7 +1649,7 @@ END_OF_VERB: - temp = new NvramBit (Cache_Stale, params.hba_Num, temp_set); - else - temp = new NvramBit (Cache_Stale, -1, temp_set); -- cmd_List->add_Item (*temp); -+ cmd_List->add_Item (*temp); - delete temp; - } - else if (!strncmp(command_Line, "+cluster", strlen("cluster"))) ---- raidutils-0.0.6.orig/raidutil/forcest.hpp -+++ raidutils-0.0.6/raidutil/forcest.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 2 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch -+* - *****************************************************************************/ + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ +- here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique - /*** INCLUDES ***/ -@@ -65,7 +68,7 @@ enum ForceStateOptions { Optimal, Fail, - class ForceState:public Command - { - public: -- ForceState::ForceState(SCSI_Addr_List *deviceList, ForceStateOptions cmd); -+ ForceState(SCSI_Addr_List *deviceList, ForceStateOptions cmd); - ForceState(const ForceState &new_ForceState); - virtual ~ForceState(); + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" ---- raidutils-0.0.6.orig/raidutil/flash.hpp -+++ raidutils-0.0.6/raidutil/flash.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 18 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-05-05 12:43:39 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/modnvram.hpp -+++ raidutils-0.0.6/raidutil/modnvram.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 8 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:12 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ +- list='$(DISTFILES)'; for file in $$list; do \ +- case $$file in \ +- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ +- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ +- esac; \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ +- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ +- dir="/$$dir"; \ +- $(mkdir_p) "$(distdir)$$dir"; \ +- else \ +- dir=''; \ +- fi; \ + if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -1062,8 +1100,8 @@ check-am: all-am + check: check-am + all-am: Makefile $(PROGRAMS) + installdirs: +- for dir in "$(DESTDIR)$(bindir)"; do \ +- test -z "$$dir" || $(mkdir_p) "$$dir"; \ ++ for dir in "$(DESTDIR)$(sbindir)"; do \ ++ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -1085,19 +1123,21 @@ clean-generic: - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/usage.cpp -+++ raidutils-0.0.6/raidutil/usage.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 35 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/namarray.hpp -+++ raidutils-0.0.6/raidutil/namarray.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 1 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch -+* - *****************************************************************************/ + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + clean: clean-am - /*** INCLUDES ***/ -@@ -58,7 +61,7 @@ class NameArray:public Command - { +-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am ++clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \ ++ mostlyclean-am - public: -- NameArray::NameArray(SCSI_Address arrayToName, char *arrayName); -+ NameArray(SCSI_Address arrayToName, char *arrayName); - NameArray(const NameArray &new_NameArray); - virtual ~NameArray(); + distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-libtool distclean-tags ++ distclean-tags ---- raidutils-0.0.6.orig/raidutil/zap.cpp -+++ raidutils-0.0.6/raidutil/zap.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 24 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + dvi: dvi-am - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/setscfg.hpp -+++ raidutils-0.0.6/raidutil/setscfg.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 2 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch -+* - *****************************************************************************/ +@@ -1105,18 +1145,38 @@ dvi-am: - /*** INCLUDES ***/ -@@ -59,7 +62,7 @@ class setscfg:public Command - { + html: html-am - public: -- setscfg::setscfg(); -+ setscfg(); - virtual ~setscfg(); ++html-am: ++ + info: info-am - Dpt_Error execute(String_List **output); ---- raidutils-0.0.6.orig/raidutil/cmdlist.hpp -+++ raidutils-0.0.6/raidutil/cmdlist.hpp -@@ -43,9 +43,12 @@ - solution. - * Version Control: - * --* $Revision: 5 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:12 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + info-am: - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/expand.hpp -+++ raidutils-0.0.6/raidutil/expand.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 1 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch -+* - *****************************************************************************/ + install-data-am: - /*** INCLUDES ***/ -@@ -55,7 +58,7 @@ - class Expand:public Command - { - public: -- Expand::Expand (SCSI_Address raid, SCSI_Addr_List *list); -+ Expand (SCSI_Address raid, SCSI_Addr_List *list); - Expand (const Expand &new_Expand); - virtual ~Expand(); - Expand &operator = (Expand &right); ---- raidutils-0.0.6.orig/raidutil/parsargv.hpp -+++ raidutils-0.0.6/raidutil/parsargv.hpp -@@ -43,9 +43,12 @@ - ctor to construct that. - * Version Control: - * --* $Revision: 5 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ +-install-exec-am: install-binPROGRAMS ++install-dvi: install-dvi-am ++ ++install-dvi-am: ++ ++install-exec-am: install-sbinPROGRAMS ++ ++install-html: install-html-am ++ ++install-html-am: - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/alarm.hpp -+++ raidutils-0.0.6/raidutil/alarm.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 2 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch -+* - *****************************************************************************/ + install-info: install-info-am - /*** INCLUDES ***/ -@@ -58,7 +61,7 @@ enum AlarmCommand { None, On, Off, Enabl - class AlarmStatus:public Command - { - public: -- AlarmStatus::AlarmStatus( int hba, AlarmCommand cmd ); -+ AlarmStatus( int hba, AlarmCommand cmd ); - AlarmStatus( const AlarmStatus &new_AlarmStatus ); - virtual ~AlarmStatus(); - AlarmStatus &operator = ( AlarmStatus &right ); ---- raidutils-0.0.6.orig/raidutil/Makefile.am -+++ raidutils-0.0.6/raidutil/Makefile.am -@@ -1,4 +1,4 @@ --bin_PROGRAMS=raidutil -+sbin_PROGRAMS=raidutil - raidutil_SOURCES=alarm.cpp bufiolsb.c cmdlist.cpp command.cpp config.cpp creatrad.cpp deletrad.cpp dynsize.cpp engiface.cpp eventlog.cpp expand.cpp flash.cpp flashmem.cpp forcest.cpp id_list.cpp intlist.cpp listdev.cpp lzssdon.cpp lzstrbuf.cpp modnvram.cpp namarray.cpp nvrambit.cpp parsargv.cpp parser.cpp parserr.cpp raidutil.cpp rawdata.cpp rdutlosd.cpp rmwflash.cpp rstnvram.cpp scsilist.cpp setcache.cpp setrate.cpp setspeed.cpp showinq.cpp status.cpp strlist.cpp taskctrl.cpp uartdmp.cpp usage.cpp zap.cpp setscfg.cpp segment.cpp swap_em.c - raidutil_CPPFLAGS=-O3 -DMESSAGES -D_DPT_ACTIVE_ALIGNMENT -Dtrue=1 -Dfalse=0 -DHORIZONTAL -DNEW_RSC_MGR -DNEW_RSC_HDR -D_DPT_FLASH -I../include - raidutil_LDADD=../lib/libraidutil.la ---- raidutils-0.0.6.orig/raidutil/rmwflash.hpp -+++ raidutils-0.0.6/raidutil/rmwflash.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 1 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch -+* - *****************************************************************************/ ++install-info-am: ++ + install-man: - /*** INCLUDES ***/ -@@ -59,7 +62,7 @@ class RMWFlash:public Command - { ++install-pdf: install-pdf-am ++ ++install-pdf-am: ++ ++install-ps: install-ps-am ++ ++install-ps-am: ++ + installcheck-am: - public: -- RMWFlash::RMWFlash(int hbaNo, char *Data, int Region, unsigned long Offset, unsigned Size); -+ RMWFlash(int hbaNo, char *Data, int Region, unsigned long Offset, unsigned Size); - RMWFlash(const RMWFlash &new_RMWFlash); - virtual ~RMWFlash(); + maintainer-clean: maintainer-clean-am +@@ -1137,19 +1197,24 @@ ps: ps-am ---- raidutils-0.0.6.orig/raidutil/lzstrbuf.h -+++ raidutils-0.0.6/raidutil/lzstrbuf.h -@@ -41,9 +41,12 @@ - * Description: Contains the declaration of the LzInStreamBuf class. - * Version Control: - * --* $Revision: 2 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-05-05 12:47:27 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + ps-am: - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/taskctrl.hpp -+++ raidutils-0.0.6/raidutil/taskctrl.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 4 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch -+* - *****************************************************************************/ +-uninstall-am: uninstall-binPROGRAMS uninstall-info-am ++uninstall-am: uninstall-sbinPROGRAMS ++ ++.MAKE: install-am install-strip ++ ++.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ ++ clean-libtool clean-sbinPROGRAMS ctags distclean \ ++ distclean-compile distclean-generic distclean-libtool \ ++ distclean-tags distdir dvi dvi-am html html-am info info-am \ ++ install install-am install-data install-data-am install-dvi \ ++ install-dvi-am install-exec install-exec-am install-html \ ++ install-html-am install-info install-info-am install-man \ ++ install-pdf install-pdf-am install-ps install-ps-am \ ++ install-sbinPROGRAMS install-strip installcheck \ ++ installcheck-am installdirs maintainer-clean \ ++ maintainer-clean-generic mostlyclean mostlyclean-compile \ ++ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ ++ tags uninstall uninstall-am uninstall-sbinPROGRAMS - /*** INCLUDES ***/ -@@ -59,7 +62,7 @@ enum TaskCommandOptions { List, Build, R - class TaskControl:public Command - { - public: -- TaskControl::TaskControl(SCSI_Addr_List *deviceList, TaskCommandOptions cmd); -+ TaskControl(SCSI_Addr_List *deviceList, TaskCommandOptions cmd); - TaskControl(const TaskControl &new_TaskControl); - virtual ~TaskControl(); +-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ +- clean-generic clean-libtool ctags distclean distclean-compile \ +- distclean-generic distclean-libtool distclean-tags distdir dvi \ +- dvi-am html html-am info info-am install install-am \ +- install-binPROGRAMS install-data install-data-am install-exec \ +- install-exec-am install-info install-info-am install-man \ +- install-strip installcheck installcheck-am installdirs \ +- maintainer-clean maintainer-clean-generic mostlyclean \ +- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ +- pdf pdf-am ps ps-am tags uninstall uninstall-am \ +- uninstall-binPROGRAMS uninstall-info-am ---- raidutils-0.0.6.orig/raidutil/setrate.cpp -+++ raidutils-0.0.6/raidutil/setrate.cpp + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +--- raidutils-0.0.6.orig/raidutil/nvrambit.cpp ++++ raidutils-0.0.6/raidutil/nvrambit.cpp @@ -38,9 +38,12 @@ - * Description: This command sets the rebuild rate. + * Description: * Version Control: * --* $Revision: 16 $ +-* $Revision: 5 $ +* $Revision$ * $NoKeywords: $ -* $Log: $ @@ -80351,13 +71708,13 @@ *****************************************************************************/ /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/nvrambit.hpp -+++ raidutils-0.0.6/raidutil/nvrambit.hpp -@@ -41,9 +41,12 @@ - * Description: +--- raidutils-0.0.6.orig/raidutil/intlist.cpp ++++ raidutils-0.0.6/raidutil/intlist.cpp +@@ -39,9 +39,12 @@ + solution in coding C++ without STL. * Version Control: * --* $Revision: 2 $ +-* $Revision: 7 $ +* $Revision$ * $NoKeywords: $ -* $Log: $ @@ -80368,9 +71725,9 @@ *****************************************************************************/ /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/zap.hpp -+++ raidutils-0.0.6/raidutil/zap.hpp -@@ -41,9 +41,12 @@ +--- raidutils-0.0.6.orig/raidutil/rawdata.cpp ++++ raidutils-0.0.6/raidutil/rawdata.cpp +@@ -38,9 +38,12 @@ * Description: * Version Control: * @@ -80379,702 +71736,945 @@ * $NoKeywords: $ -* $Log: $ +* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch ++* Revision 1.1.1.1 2004-04-29 10:20:13 bap ++* Imported upstream version 0.0.4. +* *****************************************************************************/ /*** INCLUDES ***/ -@@ -55,7 +58,7 @@ - class Zap:public Command - { - public: -- Zap::Zap( -+ Zap( - SCSI_Addr_List *addresses, // a list of addresses - int resync = 0 // (send reset to hba or not) - ); // to delete raid tables on ---- raidutils-0.0.6.orig/raidutil/creatrad.hpp -+++ raidutils-0.0.6/raidutil/creatrad.hpp +--- raidutils-0.0.6.orig/raidutil/rstnvram.hpp ++++ raidutils-0.0.6/raidutil/rstnvram.hpp @@ -41,9 +41,12 @@ * Description: * Version Control: * --* $Revision: 13 $ +-* $Revision: 4 $ +* $Revision$ * $NoKeywords: $ -* $Log: $ +* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:14 bap ++* Revision 1.1.1.1 2004-04-29 10:20:11 bap +* Imported upstream version 0.0.4. +* *****************************************************************************/ /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/flash.cpp -+++ raidutils-0.0.6/raidutil/flash.cpp -@@ -39,9 +39,12 @@ - * Description: This command flashes the specified controller - * Version Control: - * --* $Revision: 68 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-05-05 12:45:48 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ +--- raidutils-0.0.6.orig/raideng/device.hpp ++++ raidutils-0.0.6/raideng/device.hpp +@@ -144,8 +144,8 @@ const uSHORT FLG_ENG_EMULATED = 0x0001; + // 1=The device is emulated drive 1 (D:) + // 0=The device is emulated drive 0 (C:) + const uSHORT FLG_ENG_EMU_01 = 0x0002; +- // 1=The device has removeable media +-const uSHORT FLG_ENG_REMOVEABLE = 0x0004; ++ // 1=The device has removable media ++const uSHORT FLG_ENG_REMOVABLE = 0x0004; + // 1=The DPT name has not been saved to hardware + const uSHORT FLG_ENG_NEW_NAME = 0x0008; + // 1=A valid partition table was found on this device +@@ -222,9 +222,9 @@ protected: + // Return object information in the specified output buffer + virtual DPT_RTN_T rtnInfo(dptBuffer_S *); - /*** INCLUDES ***/ -@@ -176,13 +179,7 @@ Flash::Flash( - Flash::Flash( const Flash &right ) - { - ENTER( "Flash::Flash(" ); +- // Set removeable media flag +- virtual void setRemoveable() { +- scsiFlags |= FLG_ENG_REMOVEABLE; ++ // Set removable media flag ++ virtual void setRemovable() { ++ scsiFlags |= FLG_ENG_REMOVABLE; + } + + // Set SAF-TE flag +@@ -282,9 +282,9 @@ public: + + // Boolean Functions.................................. + +- // Determines if the device has removeable media +- uSHORT isRemoveable() { +- return (scsiFlags & FLG_ENG_REMOVEABLE); ++ // Determines if the device has removable media ++ uSHORT isRemovable() { ++ return (scsiFlags & FLG_ENG_REMOVABLE); + } + // Determines if the device is an emulated drive + uSHORT isEmulated() { +--- raidutils-0.0.6.orig/raideng/hba.cpp ++++ raidutils-0.0.6/raideng/hba.cpp +@@ -4020,7 +4020,7 @@ dptDevice_C *dev_P = (dptDevice_C *) log + while (dev_P) { + // If an unarrayed physical DASD device with no magic number... + if ((dev_P->getLevel()==2) && (dev_P->getObjType()==DPT_SCSI_DASD) && +- !dev_P->isComponent() && !dev_P->isRemoveable() && ++ !dev_P->isComponent() && !dev_P->isRemovable() && + !dev_P->getMagicNum()) { + + // Attempt to set the physical device's magic number +--- raidutils-0.0.6.orig/raideng/i2omsg.h ++++ raidutils-0.0.6/raideng/i2omsg.h +@@ -1,4 +1,4 @@ +-/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2omsg.h 30 4/30/01 12:57p Salyzyn $ */ ++/* $Header$ */ + /**************************************************************** + * Copyright (c) 1996-2000 Distributed Processing Technology Corporation + * Copyright (c) 2000 Adaptec Corporation. +--- raidutils-0.0.6.orig/raideng/connect.hpp ++++ raidutils-0.0.6/raideng/connect.hpp +@@ -189,7 +189,7 @@ public: + + // Constructor/Destructor............................. + +- dptSCSIcon_C::dptSCSIcon_C(); ++ dptSCSIcon_C(); + + // Message Handlers................................... + +@@ -302,7 +302,7 @@ public: + uLONG genMagicNum(); + // Get a CCB to perform I/O + engCCB_C * acquireCCB(); +- // Reserve space at the end of all non-removeable DASD devices ++ // Reserve space at the end of all non-removable DASD devices + void reserveEndOfDisks(); + // Destroy block zero of all devices marked for partition table + // zapping +--- raidutils-0.0.6.orig/raideng/i2oexec.h ++++ raidutils-0.0.6/raideng/i2oexec.h +@@ -1,4 +1,4 @@ +-/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2oexec.h 17 4/30/01 12:57p Salyzyn $ */ ++/* $Header$ */ + /**************************************************************** + * Copyright (c) 1996-2000 Distributed Processing Technology Corporation + * Copyright (c) 2000 Adaptec Corporation. +--- raidutils-0.0.6.orig/raideng/i2oadptr.h ++++ raidutils-0.0.6/raideng/i2oadptr.h +@@ -1,4 +1,4 @@ +-/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2oadptr.h 10 4/30/01 12:57p Salyzyn $ */ ++/* $Header$ */ + /**************************************************************** + * Copyright (c) 1996-2000 Distributed Processing Technology Corporation + * Copyright (c) 2000 Adaptec Corproation. +--- raidutils-0.0.6.orig/raideng/gbl_fns.cpp ++++ raidutils-0.0.6/raideng/gbl_fns.cpp +@@ -504,7 +504,7 @@ while ((b_P[i]>=32) && (b_P[i]<=126)) { + // + //Description: + // +-// This function searches the specified list for a non-removeable ++// This function searches the specified list for a non-removable + //DASD device. + // + //Parameters: +@@ -528,9 +528,9 @@ dptObject_C *obj_P = (dptObject_C *) lis + while ((obj_P!=NULL) && !found) { + if (obj_P->isManager()) + found = findDASD(((dptManager_C *)obj_P)->logList); +- // If a non-removeable DASD device is present... ++ // If a non-removable DASD device is present... + else if ((((dptDevice_C *)obj_P)->getObjType()==DPT_SCSI_DASD) && +- !((dptDevice_C *)obj_P)->isRemoveable() ) ++ !((dptDevice_C *)obj_P)->isRemovable() ) + found = 1; + obj_P = (dptObject_C *) list.next(); + } // end while (obj_P!=NULL) +--- raidutils-0.0.6.orig/raideng/osd_unix.cpp ++++ raidutils-0.0.6/raideng/osd_unix.cpp +@@ -164,6 +164,10 @@ typedef struct dpt_scsi_ha HbaInfo; + #define TO_LOGGER_BUFFER_SIZE 0x1000 + #define FROM_LOGGER_BUFFER_SIZE 0x10000 + ++/* Definitions - Device names -----------------------------------------------*/ ++ ++char *DEV_CTL = "/dev/i2octl"; // formerly /dev/i2o/ctl ++ + /* Function Prototypes ------------------------------------------------------*/ + + DPT_RTN_T osdIOrequest(uSHORT ioMethod); +@@ -374,35 +378,53 @@ DPT_RTN_T osdIOrequest(uSHORT ioMethod) + + if(ioMethod==DPT_IO_PASS_THRU) + { - --#if defined _DPT_UNIXWARE || defined _DPT_SCO - Flash( right.source, right.Resync, right.hba_Num ); --#else -- Flash::Flash( right.source, right.Resync, right.hba_Num ); --#endif +- /* Try To Open The First Adapter Device */ - - EXIT(); - } +- for(Index = 0; Index < 20; ++Index) ++ // make sure the device entry represents an active device and ++ // not just a device file that was probed unsuccessfully (so we ++ // don't wait 20 seconds trying to connect to it in the "for" ++ // loop... and so we don't generate a "could not be opened" ++ // error message mentioning the name of this probed-but-not-found ++ // device file, given that we wouldn't expect to be able to ++ // open it anyway). ++ if(DefaultHbaDev->Flags == 0 ) + { +- FileID = open(DefaultHbaDev->NodeName,O_RDONLY); +- if((FileID == -1)&&(errno == ENOENT)) +- { +- sleep(1); +- } +- else { +- break; +- } ++ // this entry was NOT initialized, so print an error message ++ // (and bypass any attempts to open the file; we simply return ++ // MSG_RTN_FAILED to the caller) ++ FormatTimeString(TimeString,time(0)); ++ printf("\nosdIDrequest : %s Fatal error, DefaultHbaDev does not point to an active controller.\n", TimeString); ++ fflush(stdout); + } ++ else { ++ ++ /* Try To Open The First Adapter Device */ ++ ++ for(Index = 0; Index < 20; ++Index) ++ { ++ FileID = open(DefaultHbaDev->NodeName,O_RDONLY); ++ if((FileID == -1)&&(errno == ENOENT)) ++ { ++ sleep(1); ++ } ++ else { ++ break; ++ } ++ } ---- raidutils-0.0.6.orig/raidutil/rawdata.hpp -+++ raidutils-0.0.6/raidutil/rawdata.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 1 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:15 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + #ifdef _SINIX_ADDON +- if (DemoMode) +- FileID = 99; ++ if (DemoMode) ++ FileID = 99; + #endif +- if(FileID != -1) +- { +- retVal = MSG_RTN_COMPLETED; +- close(FileID); +- } +- else printf("\nosdIOrequest : File %s Could Not Be Opened", +- DefaultHbaDev->NodeName); ++ if(FileID != -1) ++ { ++ retVal = MSG_RTN_COMPLETED; ++ close(FileID); ++ } ++ else printf("\nosdIOrequest : File %s Could Not Be Opened", ++ DefaultHbaDev->NodeName); ++ } + } + if(Verbose) +- printf("\nosdIOrequest : Return = %x",retVal); ++ printf("\nosdIOrequest : Return = %lx",(unsigned long)retVal); + return(retVal); + } + /* osdIOrequest() - end */ +@@ -501,12 +523,21 @@ DPT_RTN_T osdOpenEngine(void) + retVal = MSG_RTN_COMPLETED; + NumHBAs = BuildNodeNameList(); - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/deletrad.cpp -+++ raidutils-0.0.6/raidutil/deletrad.cpp -@@ -38,9 +38,12 @@ - * Description: - * Version Control: - * --* $Revision: 22 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:20:11 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ ++ // If there are no HBAs found, abort with an explict error message. ++ if(NumHBAs == 0) ++ { ++ FormatTimeString(TimeString,time(0)); ++ printf("\nosdOpenEngine : %s Fatal error, no active controller device files found.\n", TimeString); ++ retVal = MSG_RTN_FAILED; ++ fflush(stdout); ++ } ++ + if(Verbose) + { + FormatTimeString(TimeString,time(0)); + +- printf("\nosdOpenEngine : %s Return = %x - %d hbas found", +- TimeString,retVal,NumHBAs); ++ printf("\nosdOpenEngine : %s Return = %lx - %d hbas found", ++ TimeString,(unsigned long)retVal,NumHBAs); + + fflush(stdout); + } +@@ -551,7 +582,7 @@ DPT_RTN_T osdCloseEngine(void) + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\nosdCloseEngine : %s Return = %x",TimeString,retVal); ++ printf("\nosdCloseEngine : %s Return = %lx",TimeString,(unsigned long)retVal); + fflush(stdout); + } + return (retVal); +@@ -723,7 +754,7 @@ DPT_RTN_T osdGetDrvrSig(uSHORT ioMethod, + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\nosdGetDrvrSig : %s Return = %x",TimeString,retVal); ++ printf("\nosdGetDrvrSig : %s Return = %lx",TimeString,(unsigned long)retVal); + fflush(stdout); + } + +@@ -819,7 +850,7 @@ DPT_RTN_T osdSendCCB(uSHORT ioMethod,dpt + ccb_P->eataCP.nestedFW & 0x0ff, + ccb_P->eataCP.physical & 0x0ff); + printf( +- "\n ScsiAddr = (%.1x,%.1x,%.1x,%.1x), ReqLen = %.2X, DataLen = %.2X", ++ "\n ScsiAddr = (%.1x,%.1x,%.1x,%.1x), ReqLen = %.2X, DataLen = %.2lX", + ccb_P->ctlrNum, + (ccb_P->eataCP.devAddr >> 5) & 0x0ff, + ccb_P->eataCP.devAddr & 0x01f, +@@ -946,7 +977,7 @@ DPT_RTN_T osdSendCCB(uSHORT ioMethod,dpt + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\nosdSendCCB : %s Return = %x",TimeString,retVal); ++ printf("\nosdSendCCB : %s Return = %lx",TimeString,(unsigned long)retVal); + fflush(stdout); + } + return (retVal); +@@ -1019,8 +1050,8 @@ DPT_RTN_T osdSendMessage(uLONG HbaNum, P + { + if(!HbaDevs[HbaNum].IoAddress) + { +- printf("\nosdSendMessage : IoAddress is zero for HbaNum=%d\n", +- HbaNum); ++ printf("\nosdSendMessage : IoAddress is zero for HbaNum=%ld\n", ++ (unsigned long)HbaNum); + } + } + +@@ -1232,7 +1263,7 @@ DPT_RTN_T osdSendMessage(uLONG HbaNum, P + #elif defined (_DPT_SCO) || defined (SNI_MIPS) || defined(_DPT_SOLARIS) || defined(_DPT_BSDI) || defined(_DPT_FREE_BSD) || defined(_DPT_LINUX) + + #if defined(_DPT_LINUX_I2O) +- if(strcmp(HbaDevs[HbaNum].NodeName, "/dev/i2o/ctl")) ++ if(strcmp(HbaDevs[HbaNum].NodeName, DEV_CTL)) + i = ioctl(FileID,I2OUSRCMD,IoctlBuffer_P); + else { + struct i2o_cmd_passthru pt; +@@ -1312,7 +1343,7 @@ DPT_RTN_T osdSendMessage(uLONG HbaNum, P + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\nosdSendMessage : %s Return = %x",TimeString,retVal); ++ printf("\nosdSendMessage : %s Return = %lx",TimeString,(unsigned long)retVal); + } + return(retVal); + +@@ -1914,7 +1945,7 @@ int _osdStartI2OCp(Controller_t controll + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\n_osdStartCp : %s Enter, callback = %x",TimeString,callback); ++ printf("\n_osdStartCp : %s Enter, callback = %lx",TimeString,(unsigned long)callback); + } + + // +@@ -2028,7 +2059,7 @@ DPT_RTN_T osdGetCtlrs(uSHORT ioMethod,uS + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\nosdGetCtlrs : %s Enter ",TimeString,retVal); ++ printf("\nosdGetCtlrs : %s Enter, Return = %ld ",TimeString,(unsigned long)retVal); + fflush(stdout); + } + +@@ -2144,7 +2175,7 @@ DPT_RTN_T osdGetCtlrs(uSHORT ioMethod,uS + i = 0; + } + #elif defined(_DPT_LINUX_I2O) +- if(strcmp(HbaDevs[Count].NodeName, "/dev/i2o/ctl")) ++ if(strcmp(HbaDevs[Count].NodeName, DEV_CTL)) + i = osdSendIoctl(&HbaDevs[Count],DPT_CTRLINFO,DataBuff,&pkt); + else { + /* +@@ -2289,7 +2320,7 @@ DPT_RTN_T osdGetCtlrs(uSHORT ioMethod,uS + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\nosdGetCtlrs : %s Return = %x",TimeString,retVal); ++ printf("\nosdGetCtlrs : %s Return = %lx",TimeString,(unsigned long)retVal); + fflush(stdout); + } + +@@ -2367,7 +2398,7 @@ DPT_RTN_T osdGetSysInfo(sysInfo_S *SysIn + SysInfo_P->busType = SI_PCI_BUS; + SysInfo_P->processorFamily = PROC_INTEL; + buffer_size = sysinfo(SI_ARCHITECTURE, buffer_ptr, 0); +- buffer_ptr = (char *)malloc((int)buffer_size); ++ buffer_ptr = (char *)malloc((size_t)buffer_size); + status = sysinfo(SI_ARCHITECTURE, buffer_ptr, buffer_size); + if (status != -1) + { +@@ -2579,7 +2610,7 @@ DPT_RTN_T osdGetSysInfo(sysInfo_S *SysIn + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\nosdGetSysInfo : %s Return = %d",TimeString,retVal); ++ printf("\nosdGetSysInfo : %s Return = %ld",TimeString,(unsigned long)retVal); + fflush(stdout); + } + return (retVal); +@@ -2647,7 +2678,7 @@ int BufferAlloc(uLONG toLoggerSize, char + + /* The Attach Failed, So DeAllocate The Shared Memory */ + +- if((int)SharedMemoryPtr == -1) ++ if((long)SharedMemoryPtr == -1) + { + Rtnval = 1; + shmctl(BufferID,IPC_RMID,&shm_buff); +@@ -2782,7 +2813,7 @@ int BufferAlloc(uLONG toLoggerSize, char + toLoggerTotalSize = toLoggerSize + sizeof(dptBuffer_S); + fromLoggerTotalSize = fromEngSize + sizeof(dptBuffer_S); + FromLoggerBuffOffset = toLoggerTotalSize; +- Ptr = (char *)malloc((uINT)(toLoggerTotalSize + fromLoggerTotalSize)); ++ Ptr = (char *)malloc((size_t)(toLoggerTotalSize + fromLoggerTotalSize)); + if(Ptr != NULL) + { + *toLogger_P_P = Ptr; +@@ -2900,8 +2931,8 @@ DPT_RTN_T osdLoggerCmd( DPT_MSG_T cmd, v + { + FormatTimeString(TimeString,time(0)); + printf( +- "\nosdLoggerCmd : %s Cmd = %x,ioMethod = %x,LoggerID = %x,Hba = %x", +- TimeString,cmd,ioMethod,LoggerID,hbanum); ++ "\nosdLoggerCmd : %s Cmd = %lx,ioMethod = %x,LoggerID = %lx,Hba = %lx", ++ TimeString,(unsigned long)cmd,ioMethod,LoggerID,hbanum); + fflush(stdout); + } + +@@ -3387,7 +3418,7 @@ DPT_RTN_T osdLoggerCmd( DPT_MSG_T cmd, v + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\n : %s Return = %x",TimeString,retVal); ++ printf("\n : %s Return = %lx",TimeString,(unsigned long)retVal); + fflush(stdout); + } + return (retVal); +@@ -3421,11 +3452,11 @@ void *osdAllocIO(uLONG size) + { + void *Rtnval; + +- Rtnval = (void *)malloc((uINT)size); ++ Rtnval = (void *)malloc((size_t)size); + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\nosdAllocIO : %s Return = %x",TimeString,Rtnval); ++ printf("\nosdAllocIO : %s Return = %lx",TimeString,(unsigned long)Rtnval); + fflush(stdout); + } - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/raidutil/setrate.hpp -+++ raidutils-0.0.6/raidutil/setrate.hpp -@@ -41,9 +41,12 @@ - * Description: - * Version Control: - * --* $Revision: 2 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.2 2006-03-13 03:15:15 bap -+* GCC 4.1 patch -+* - *****************************************************************************/ +@@ -3459,7 +3490,7 @@ void osdFreeIO(void *buff_P) + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\nosdFreeIO : %s Buf = %x",TimeString,buff_P); ++ printf("\nosdFreeIO : %s Buf = %lx",TimeString,(unsigned long)buff_P); + fflush(stdout); + } - /*** INCLUDES ***/ -@@ -59,8 +62,8 @@ class SetRate: public Command - public: +@@ -3613,7 +3644,7 @@ DPT_RTN_T osdCheckBLED(uSHORT ctlrNum, + if(Verbose) + { + FormatTimeString(TimeString,time(0)); +- printf("\nosdCheckBLED : %s Return = %d",TimeString,retVal); ++ printf("\nosdCheckBLED : %s Return = %ld",TimeString,(unsigned long)retVal); + fflush(stdout); + } + return (retVal); +@@ -3743,16 +3774,56 @@ uSHORT BuildNodeNameList(void) + NumEntries = 0; - // Set the (global) rebuild rate -- SetRate::SetRate(int rate, SCSI_Addr_List *objs); -- SetRate::SetRate(const SetRate &right); -+ SetRate(int rate, SCSI_Addr_List *objs); -+ SetRate(const SetRate &right); - virtual ~SetRate(); + # if (defined(_DPT_LINUX_I2O)) ++ uCHAR LinuxI2ODataBuff[MAX_I2O_CONTROLLERS]; ++ + memset(&pkt, 0, sizeof(EATA_CP)); + HbaDevs[NumEntries].Flags = 0; +- strcpy(HbaDevs[NumEntries].NodeName, "/dev/i2o/ctl"); +- IoctlRtn = osdSendIoctl(&HbaDevs[NumEntries], I2OGETIOPS, (uCHAR *)&NumEntries, &pkt); ++ strcpy(HbaDevs[NumEntries].NodeName, DEV_CTL); ++ IoctlRtn = osdSendIoctl(&HbaDevs[NumEntries], I2OGETIOPS, LinuxI2ODataBuff, &pkt); + if(!IoctlRtn) { +- for(i = 0; i < NumEntries; i ++) { +- HbaDevs[i].Flags = NODE_FILE_VALID_HBA_B | NODE_FILE_I2O_HBA_B; +- HbaDevs[i].IoAddress = UINTPTR_MAX; +- strcpy(HbaDevs[i].NodeName, "/dev/i2o/ctl"); +- } ++ // step through the returned data buffer and look for the ++ // non-zero entries, which indicate an active IOP. For each ++ // one we find, add a corresponding entry in HbaDevs. ++ for(i = 0; i < MAX_I2O_CONTROLLERS; i ++) { ++ if ( LinuxI2ODataBuff[i] != 0 ) ++ { ++ if(NumEntries >= MAX_HAS) ++ { ++ FormatTimeString(TimeString,time(0)); ++ ++ printf("\nBuildNodeNameList : %s Warning: Found more than %d Linux I2O Controlers; ignoring those that won't fit in the HbaDevs array.", ++ TimeString, MAX_HAS); ++ ++ fflush(stdout); ++ break; ++ } ++ if(Verbose) ++ { ++ FormatTimeString(TimeString,time(0)); ++ ++ printf("\nBuildNodeNameList : %s Found Linux I2O Controler, using %s device file for utility-relative controller number %d.", ++ TimeString, DEV_CTL, NumEntries); ++ ++ fflush(stdout); ++ } ++ ++ HbaDevs[NumEntries].Flags = NODE_FILE_VALID_HBA_B | NODE_FILE_I2O_HBA_B; ++ HbaDevs[NumEntries].IoAddress = UINTPTR_MAX; ++ strcpy(HbaDevs[NumEntries].NodeName, DEV_CTL); ++ ++ ++NumEntries; ++ } ++ else { ++ // for now, we'll assume that all the active IOP entries ++ // are at the front of the returned buffer. In order to ++ // support "gaps", we'd need to record the IOP index in the ++ // NodeFiles_S structure and use that instead of HbaNum when ++ // we call the I2OPASSTHRU ioctl (or make sure that ++ // everything that looks at HbaDevs can handle inactive ++ // entries in the middle of the array). ++ break; ++ } ++ } // for(i = 0; i < MAX_I2O_CONTROLLERS; i ++) + } + # endif - Dpt_Error execute(String_List **output); ---- raidutils-0.0.6.orig/raidutil/lzstrbuf.cpp -+++ raidutils-0.0.6/raidutil/lzstrbuf.cpp -@@ -41,9 +41,12 @@ - * - * Version Control: - * --* $Revision: 3 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-05-05 12:49:55 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ +--- raidutils-0.0.6.orig/raideng/connect.cpp ++++ raidutils-0.0.6/raideng/connect.cpp +@@ -176,7 +176,7 @@ return (ccb_P); + //Description: + // + // This function attempts to reserve space at the end of all non- +-//removeable DASD devices. This space is used by DPT to store ++//removable DASD devices. This space is used by DPT to store + //configuration information, downloaded FW code... + // + //Parameters: +@@ -203,9 +203,9 @@ dptObject_C *obj_P = (dptObject_C *) obj + while (obj_P!=NULL) { + if (obj_P->isDevice()) { + dev_P = (dptDevice_C *) obj_P; +- // If a non-removeable HBA physical DASD device... ++ // If a non-removable HBA physical DASD device... + if ((dev_P->getLevel()==2) && (dev_P->getObjType()==DPT_SCSI_DASD) && +- !dev_P->isComponent() && !dev_P->isRemoveable()) { ++ !dev_P->isComponent() && !dev_P->isRemovable()) { - /*** INCLUDES ***/ ---- raidutils-0.0.6.orig/include/mgr.hh -+++ raidutils-0.0.6/include/mgr.hh -@@ -34,8 +34,8 @@ - #define PACK - #endif + // Determine how much space is currently reserved + spaceReserved = dev_P->getMaxPhyLBA() - dev_P->getLastLBA(); +--- raidutils-0.0.6.orig/raideng/Makefile.am ++++ raidutils-0.0.6/raideng/Makefile.am +@@ -1,4 +1,4 @@ +-bin_PROGRAMS=raideng ++sbin_PROGRAMS=raideng + raideng_SOURCES=addr_rng.cpp array.cpp connect.cpp core.cpp core_ccb.cpp core_con.cpp core_dev.cpp core_mgr.cpp core_obj.cpp debug.cpp device.cpp dptcbuff.c driver.cpp eata2i2o.c eng_sig.c eng_std.cpp eng_unix.cpp engine.cpp englists.cpp gbl_fns.cpp hba.cpp manager.cpp msg_str.cpp object.cpp osd_unix.cpp ptrarray.cpp raid.cpp raid_bcd.cpp raid_dev.cpp raid_hba.cpp raid_mgr.cpp raiddrvr.cpp scsi_bcd.cpp scsi_ccb.cpp scsi_con.cpp scsi_dev.cpp scsi_hba.cpp scsi_mgr.cpp scsi_obj.cpp scsidrvr.cpp semaphor.c stat_log.cpp swap_em.c threads.cpp unreslvd.cpp + raideng_CPPFLAGS=-D__UNIX__ -DMESSAGES -D_DPT_ACTIVE_ALIGNMENT -DI_WANT_SNI_DEBUG -DNEW_LOGGER -I../include + raideng_LDADD=../lib/libraidutil.la +--- raidutils-0.0.6.orig/raideng/i2outil.h ++++ raidutils-0.0.6/raideng/i2outil.h +@@ -1,4 +1,4 @@ +-/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2outil.h 12 4/30/01 12:57p Salyzyn $ */ ++/* $Header$ */ + /**************************************************************** + * Copyright (c) 1996-2000 Distributed Processing Technology Corporation + * Copyright (c) 2000 Adaptec Corporation. +--- raidutils-0.0.6.orig/raideng/raid_dev.cpp ++++ raidutils-0.0.6/raideng/raid_dev.cpp +@@ -317,13 +317,13 @@ DPT_RTN_T dptRAIDdev_C::okPermission(rai + comp_P = comp1_P = (dptRAIDdev_C *) compList.reset(); -- dptCaddr_S maxAddr PACK; // Maximum physical address supported -- dptCaddr_S minAddr PACK; // Minimum physical address supported -+ dptCaddr_S maxAddr PACK_A; // Maximum physical address supported -+ dptCaddr_S minAddr PACK_A; // Minimum physical address supported + while ((comp_P!=NULL) && (retVal==MSG_RTN_COMPLETED)) { +- if (!(def_P->permit & FLG_COMP_REMOVEABLE)) +- if (comp_P->isRemoveable()) +- // Removeable media devices not permitted ++ if (!(def_P->permit & FLG_COMP_REMOVABLE)) ++ if (comp_P->isRemovable()) ++ // Removable media devices not permitted + retVal = MSG_RTN_FAILED | ERR_RAID_COMP_REMOVE; + if (!(def_P->permit & FLG_COMP_EMULATED)) + if (comp_P->isEmulated()) +- // Removeable media devices not permitted ++ // Removable media devices not permitted + retVal = MSG_RTN_FAILED | ERR_RAID_COMP_EMULATED; + if (!(def_P->permit & FLG_COMP_ANY_TYPE)) + if (comp_P->getObjType()!=def_P->devType) +--- raidutils-0.0.6.orig/raideng/unreslvd.cpp ++++ raidutils-0.0.6/raideng/unreslvd.cpp +@@ -34,7 +34,7 @@ extern "C" + char *__nw__FUi(int size) + { + char *p; +- p = (char *)malloc(size); ++ p = (char *)malloc((size_t)size); + return(p); + } - // RAID manager information (Ignore if not a RAID manager) +--- raidutils-0.0.6.orig/raideng/i2obscsi.h ++++ raidutils-0.0.6/raideng/i2obscsi.h +@@ -1,4 +1,4 @@ +-/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2obscsi.h 14 4/30/01 12:57p Salyzyn $ */ ++/* $Header$ */ + /**************************************************************** + * Copyright (c) 1996-2000 Distributed Processing Technology Corporation + * Copyright (c) 2000 Adaptec Corporation. +--- raidutils-0.0.6.orig/raideng/scsi_dev.cpp ++++ raidutils-0.0.6/raideng/scsi_dev.cpp +@@ -124,9 +124,9 @@ if (flg & FLG_DEV_EMULATED) + if (flg & FLG_DEV_EMU_01) + scsiFlags |= FLG_ENG_EMU_01; ---- raidutils-0.0.6.orig/include/rtncodes.h -+++ raidutils-0.0.6/include/rtncodes.h -@@ -496,7 +496,7 @@ - // Errors downloading firmware - //--------------------------------------------------------------------------- +- // If removeable... +-if (flg & FLG_DEV_REMOVEABLE) +- scsiFlags |= FLG_ENG_REMOVEABLE; ++ // If removable... ++if (flg & FLG_DEV_REMOVABLE) ++ scsiFlags |= FLG_ENG_REMOVABLE; -- // There are no non-removeable DASD devices to store the FW code. -+ // There are no non-removable DASD devices to store the FW code. - #define ERR_FWD_NO_SPACE (0x01f0L | MSG_RTN_FAILED) + // If a valid partition table exists... + if (flg & FLG_DEV_PTABLE) +@@ -281,8 +281,8 @@ if (isEmulated()) + flg |= FLG_DEV_EMULATED; + if (scsiFlags & FLG_ENG_EMU_01) + flg |= FLG_DEV_EMU_01; +-if (isRemoveable()) +- flg |= FLG_DEV_REMOVEABLE; ++if (isRemovable()) ++ flg |= FLG_DEV_REMOVABLE; + if (isLogical()) + flg |= FLG_DEV_LOGICAL; + if (scsiFlags & FLG_ENG_PTABLE) +--- raidutils-0.0.6.orig/raideng/i2odep.h ++++ raidutils-0.0.6/raideng/i2odep.h +@@ -203,7 +203,7 @@ typedef unsigned char BOOL; + # define _F_set12bit4(w,x,y,z,u) ((w)->z = (u)) + # define _F_get16bit(w,x,y,z) ((U16)((w)->z)) + # define _F_set16bit(w,x,y,z,u) ((w)->z = (u)) +-#elif (defined(_DPT_BIG_ENDIAN)) ++#elif (defined(_DPT_BIG_ENDIAN) || defined(sparc)) + /* First 12 bits */ + # define _F_getTID(w,x,y) getL12bit(w,x,0) + # define _F_setTID(w,x,y,z) setL12bit(w,x,0,z) +--- raidutils-0.0.6.orig/raideng/device.cpp ++++ raidutils-0.0.6/raideng/device.cpp +@@ -1415,8 +1415,8 @@ DPT_RTN_T dptDevice_C::readReserve - // There are only DASD devices without sufficient space reserved -@@ -517,8 +517,8 @@ - // Errors reserving disk space - //--------------------------------------------------------------------------- + DPT_RTN_T retVal = MSG_RTN_IGNORED; -- // Cannot reserve disk space on a removeable media device --#define ERR_RSV_REMOVEABLE (0x0200L | MSG_RTN_FAILED) -+ // Cannot reserve disk space on a removable media device -+#define ERR_RSV_REMOVABLE (0x0200L | MSG_RTN_FAILED) - // Cannot reserve disk space on a non-DASD device - #define ERR_RSV_NOT_DASD (0x0201L | MSG_RTN_FAILED) - // The # of blocks reserved must be greater than zero ---- raidutils-0.0.6.orig/include/messages.h -+++ raidutils-0.0.6/include/messages.h -@@ -1656,7 +1656,7 @@ - #define MSG_DOWNLOAD_FW 0x0076L +- // If this is a non-removeable FW physical DASD device... +-if ((getObjType()==DPT_SCSI_DASD) && (getLevel()==2) && !isRemoveable() && ++ // If this is a non-removable FW physical DASD device... ++if ((getObjType()==DPT_SCSI_DASD) && (getLevel()==2) && !isRemovable() && + (capacity.maxPhysLBA>0)) { + // Initialize the CCB to perform a read operation + ccb_P->read(capacity.maxPhysLBA,1,512,ptrToLong(ccb_P->dataBuff_P)); +@@ -2462,8 +2462,8 @@ if ((status.display==DSPLY_STAT_OPTIMAL) + if (isPhysical()) { + // Perform a test unit ready cmd + checkIfReady(); +- // If removeable media or no capacity info +- if (isReady() && (isRemoveable() || (capacity.maxLBA == 0))) { ++ // If removable media or no capacity info ++ if (isReady() && (isRemovable() || (capacity.maxLBA == 0))) { + // Try to get the media capacity + getCapacity(); + // If valid capacity info... +@@ -2472,8 +2472,8 @@ if (isPhysical()) { + initReserveBlockInfo(); + } + +- // if the device is not ready and it is not formatting (and not removeable) +- if (!isReady() && !(status.main == PMAIN_STAT_FORMAT) && !isRemoveable()) { ++ // if the device is not ready and it is not formatting (and not removable) ++ if (!isReady() && !(status.main == PMAIN_STAT_FORMAT) && !isRemovable()) { + status.display = DSPLY_STAT_MISSING; + DEBUG(1, "Device " << PRT_ADDR << "set to missing" ); + } +@@ -4338,7 +4338,7 @@ return (retVal); // - // Description: --// Downloads FW code to an HBA's non-removeable DASD devices. -+// Downloads FW code to an HBA's non-removable DASD devices. + //Description: // - // Target Types: 0 - // Input Data: Download cmd (uLONG) ---- raidutils-0.0.6.orig/include/hba.hh -+++ raidutils-0.0.6/include/hba.hh -@@ -34,13 +34,13 @@ - #define PACK - #endif +-// This function reserves space at the end of a non-removeable DASD ++// This function reserves space at the end of a non-removable DASD + //device for use by DPT. This space is currently used for a reserve block, + //a RAID table, and downloaded FW code. + // +@@ -4375,7 +4375,7 @@ return(retVal); + // + //Description: + // +-// This function reserves space at the end of a non-removeable DASD ++// This function reserves space at the end of a non-removable DASD + //device for use by DPT. This space is currently used for a reserve block, + //a RAID table, and downloaded FW code. + // +@@ -4402,8 +4402,8 @@ DPT_RTN_T dptDevice_C::reserveEndO -- dptIOaddr_U ioAddr PACK; // EISA/ISA/PCI address -+ dptIOaddr_U ioAddr PACK_A; // EISA/ISA/PCI address - uSHORT drvrRefNum; // Number by which the driver ref- - // erences this HBA - #if defined (_DPT_STRICT_ALIGN) - uSHORT sniAdjust4; - #endif -- dptHBAid_U id PACK; // EISA = ID PAL bytes -+ dptHBAid_U id PACK_A; // EISA = ID PAL bytes - // ISA = Not used - // PCI = vendor ID, product ID - uSHORT drqNum; // DRQ # (0,5,6,7,0xffff=invalid) -@@ -80,7 +80,7 @@ - uCHAR raidID; // Software selectable RAID ID # - uCHAR slotID; // Slot specific RAID ID # + DPT_RTN_T retVal; -- dptChanInfo_S chanInfo[NUM_CHAN_INFO] PACK; // SCSI channel info (multi-channel boards) -+ dptChanInfo_S chanInfo[NUM_CHAN_INFO] PACK_A; // SCSI channel info (multi-channel boards) +- if (isRemoveable()) +- retVal = MSG_RTN_FAILED | ERR_RSV_REMOVEABLE; ++ if (isRemovable()) ++ retVal = MSG_RTN_FAILED | ERR_RSV_REMOVABLE; + else if (getObjType()!=DPT_SCSI_DASD) + retVal = MSG_RTN_FAILED | ERR_RSV_NOT_DASD; + else if (numBlocks==0) +--- raidutils-0.0.6.orig/raideng/object.hpp ++++ raidutils-0.0.6/raideng/object.hpp +@@ -249,8 +249,8 @@ protected: - uCHAR excludeStart; - uCHAR excludeEnd; ---- raidutils-0.0.6.orig/include/dpt_scsi.h -+++ raidutils-0.0.6/include/dpt_scsi.h -@@ -757,7 +757,7 @@ - void setLba(uLONG inLong) { setU1(this,3,inLong); - setU1(this,2,inLong >> 8); - setU1(this,1,((inLong >> 16L) & 0x1F) -- | ((scReadWrite6_S __FAR__ *)(this))->getLun() & 0xE0); } -+ | (((scReadWrite6_S __FAR__ *)(this))->getLun() & 0xE0)); } - # define scReadWrite6_setLba(this,inLong) ((scReadWrite6_S __FAR__ *)(this))->setLba(inLong) + // Return object information in the specified output buffer + virtual DPT_RTN_T rtnInfo(dptBuffer_S *); +- // Set removeable media flag +- virtual void setRemoveable() {} ++ // Set removable media flag ++ virtual void setRemovable() {} - uSHORT getLength() { return getU1(this,4); } ---- raidutils-0.0.6.orig/include/device.hh -+++ raidutils-0.0.6/include/device.hh -@@ -27,6 +27,14 @@ - */ + // Set SAFTE flag + virtual void setSAFTE() {}; +--- raidutils-0.0.6.orig/raideng/driver.cpp ++++ raidutils-0.0.6/raideng/driver.cpp +@@ -465,7 +465,7 @@ DPT_RTN_T dptDriver_C::scanSystem(uSHORT - // Data unique to every engine device -+ -+ -+// use PACK for things that should be packed; -+// PACK_A for things that you'd like packed by would give a -+// warning on anything except an ARM if actually packed; and -+// PACK_WAS if it used to be packed by this gave warnings -+// everywhere so now it isn't. -+ - #undef PACK - #if (defined(__GNUC__)) - # define PACK __attribute__ ((packed)) -@@ -34,11 +42,17 @@ - #define PACK - #endif + // Check for valid partition tables + findLSUpartitions(); +- // Attempt to reserve space at the end of every non-removeable ++ // Attempt to reserve space at the end of every non-removable + // disk for use by DPT + myConn_P()->reserveEndOfDisks(); -+#ifdef __arm__ -+# define PACK_A PACK -+#else -+# define PACK_A -+#endif -+ - uSHORT scsiOffset; // 0=Async mode - // Non-zero = SCSI offset - uSHORT xfrSpeed; // SCSI transfer speed --dptCcapacity_S capacity PACK; // Device capacity --dptCemuParam_S emulation PACK; // Emulated drive parameters -+dptCcapacity_S capacity PACK_A; // Device capacity -+dptCemuParam_S emulation PACK_A; // Emulated drive parameters - // DPT specific name (ASCII string) - // (Up to 8 valid chars + NULL terminator + 1) - uCHAR dptName[DPT_NAME_SIZE+2]; ---- raidutils-0.0.6.orig/include/get_info.h -+++ raidutils-0.0.6/include/get_info.h -@@ -263,8 +263,8 @@ const uLONG DPT_ENGINE_COMPATIBILITY = - // 1=The device is emulated drive 1 (D:) - // 0=The device is emulated drive 0 (C:) - #define FLG_DEV_EMU_01 0x0008 -- // 1=The device has removeable media --#define FLG_DEV_REMOVEABLE 0x0010 -+ // 1=The device has removable media -+#define FLG_DEV_REMOVABLE 0x0010 - // 1=The device originates in a logical device list - // 0=The device originates in a physical object list - #define FLG_DEV_LOGICAL 0x0020 -@@ -364,6 +364,12 @@ const uLONG DPT_ENGINE_COMPATIBILITY = - #include "device.hh" - #include "raid_dev.hh" +--- raidutils-0.0.6.orig/raideng/semaphor.c ++++ raidutils-0.0.6/raideng/semaphor.c +@@ -434,7 +434,7 @@ SEMAPHORE_T osdCreateSemaphore() + rtnVal = privateCreateUnnamedSemaphore(0); -+ // use PACK for things that should be packed; -+ // PACK_A for things that you'd like packed by would give a -+ // warning on anything except an ARM if actually packed; and -+ // PACK_WAS if it used to be packed by this gave warnings -+ // everywhere so now it isn't. -+ - #undef PACK - #if (defined(__GNUC__)) - # define PACK __attribute__ ((packed)) -@@ -371,19 +377,27 @@ const uLONG DPT_ENGINE_COMPATIBILITY = - #define PACK - #endif + if (Verbose) +- printf("\nosdCreateSemaphore : Rtn = %x", rtnVal); ++ printf("\nosdCreateSemaphore : Rtn = %lx", (unsigned long)rtnVal); -+#ifdef __arm__ -+# define PACK_A PACK -+#else -+# define PACK_A -+#endif -+ -+#define PACK_WAS -+ - uSHORT flags2; // Supplemental flags word - uSHORT hbaIndex; // HBA index # (slot #) - uSHORT hbaFlags; // HBA flags - see bit definitions below - #if defined (_DPT_STRICT_ALIGN) - uSHORT sniAdjust3; - #endif -- uLONG magicNum PACK; // RAID magic # -- uLONG hbaTag PACK; // Reserved for future expansion -- uLONG flags3 PACK; // Miscellaneous flags - see bit definitions above -- uSHORT busSpeed PACK; // Negotiated bus speed (in Mhz) -- uCHAR p2Flags PACK; // Path 2 flags - see bit definitions above -- uCHAR reserved4 PACK; // Reserved for future expansion -- uLONG availableCapacity PACK; // Reserved for future expansion -+ uLONG magicNum PACK; // RAID magic # -+ uLONG hbaTag PACK; // Reserved for future expansion -+ uLONG flags3 PACK; // Miscellaneous flags - see bit definitions above -+ uSHORT busSpeed PACK; // Negotiated bus speed (in Mhz) -+ uCHAR p2Flags PACK_WAS; // Path 2 flags - see bit definitions above -+ uCHAR reserved4 PACK_WAS; // Reserved for future expansion -+ uLONG availableCapacity PACK; // Reserved for future expansion + return(rtnVal); + } +@@ -475,7 +475,7 @@ SEMAPHORE_T osdCreateNamedSemaphore(char + rtnVal = privateCreateNamedSemaphore(temp, 0); - uCHAR udmaModeSupported;// The maximum UDMA mode supported - uCHAR udmaModeSelected; // The current operational UDMA mode ---- raidutils-0.0.6.orig/include/ctlr_map.hpp -+++ raidutils-0.0.6/include/ctlr_map.hpp -@@ -40,9 +40,12 @@ - * Description: - * Version Control: - * --* $Revision: 17 $ -+* $Revision$ - * $NoKeywords: $ --* $Log: $ -+* $Log$ -+* Revision 1.1.1.1 2004-04-29 10:19:50 bap -+* Imported upstream version 0.0.4. -+* - *****************************************************************************/ + if (Verbose) +- printf("\nosdCreateNamedSemaphore : Rtn = %x", rtnVal); ++ printf("\nosdCreateNamedSemaphore : Rtn = %lx", (unsigned long)rtnVal); - #ifndef _NFILE ---- raidutils-0.0.6.orig/include/linux/i2o-dev.h -+++ raidutils-0.0.6/include/linux/i2o-dev.h -@@ -13,32 +13,24 @@ - * This header file defines the I2O APIs that are available to both - * the kernel and user level applications. Kernel specific structures - * are defined in i2o_osm. OSMs should include _only_ i2o_osm.h which -- * automatically includs this file. -+ * automatically includes this file. - * - */ + return(rtnVal); + } +@@ -714,7 +714,7 @@ uLONG osdRequestSemaphore(SEMAPHORE_T se + } - #ifndef _I2O_DEV_H - #define _I2O_DEV_H + if (Verbose) +- printf("\nosdRequestSemaphore : Rtn = %x\n", rtnVal); ++ printf("\nosdRequestSemaphore : Rtn = %lx\n", rtnVal); --#define __user - /* How many controllers are we allowing */ - #define MAX_I2O_CONTROLLERS 32 + return(rtnVal); + } +@@ -885,7 +885,7 @@ SEMAPHORE_T osdCreateEventSemaphore() + rtnVal = privateCreateUnnamedSemaphore(1); --#include -- --#ifndef __KERNEL__ -- --typedef unsigned char u8; --typedef unsigned short u16; --typedef unsigned int u32; -- --#endif /* __KERNEL__ */ -+#include -+#include + if (Verbose) +- printf("\nosdCreateEventSemaphore : Rtn = %x", rtnVal); ++ printf("\nosdCreateEventSemaphore : Rtn = %lx", (unsigned long)rtnVal); - /* - * I2O Control IOCTLs and structures - */ - #define I2O_MAGIC_NUMBER 'i' --#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,u8[MAX_I2O_CONTROLLERS]) -+#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,__u8[MAX_I2O_CONTROLLERS]) - #define I2OHRTGET _IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct) - #define I2OLCTGET _IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct) - #define I2OPARMSET _IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget) -@@ -46,7 +38,7 @@ typedef unsigned int u32; - #define I2OSWDL _IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer) - #define I2OSWUL _IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer) - #define I2OSWDEL _IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer) --#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,u32) -+#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,__u32) - #define I2OHTML _IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html) - #define I2OEVTREG _IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id) - #define I2OEVTGET _IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info) -@@ -55,27 +47,27 @@ typedef unsigned int u32; + return(rtnVal); + } +@@ -923,7 +923,7 @@ SEMAPHORE_T osdCreateNamedEventSemaphore + rtnVal = privateCreateNamedSemaphore(temp, 1); - struct i2o_cmd_passthru32 { - unsigned int iop; /* IOP unit number */ -- u32 msg; /* message */ -+ __u32 msg; /* message */ - }; + if (Verbose) +- printf("\nosdCreateNamedEventSemaphore : Rtn = %x", rtnVal); ++ printf("\nosdCreateNamedEventSemaphore : Rtn = %lx", (unsigned long)rtnVal); - struct i2o_cmd_passthru { - unsigned int iop; /* IOP unit number */ -- void __user *msg; /* message */ -+ void *msg; /* message */ - }; + return(rtnVal); + } +--- raidutils-0.0.6.orig/raideng/object.cpp ++++ raidutils-0.0.6/raideng/object.cpp +@@ -121,9 +121,9 @@ memcpy(descr.productID,inq_P->getProduct + memcpy(descr.revision,inq_P->getRevision(),4); + memcpy(descr.vendorExtra,inq_P->getVendorExtra(),20); + descr.terminate(); +- // Check for removeable media ++ // Check for removable media + if (inq_P->getDevType() & DEVTYPE_RMB) +- setRemoveable(); ++ setRemovable(); - struct i2o_cmd_hrtlct { - unsigned int iop; /* IOP unit number */ -- void __user *resbuf; /* Buffer for result */ -- unsigned int __user *reslen; /* Buffer length in bytes */ -+ void *resbuf; /* Buffer for result */ -+ unsigned int *reslen; /* Buffer length in bytes */ - }; + // look for SAF-TE in the vendor extra field or the product ID + if (memcmp(inq_P->getVendorExtra()+8, "SAF-TE", 6) == 0) +--- raidutils-0.0.6.orig/raideng/eng_unix.cpp ++++ raidutils-0.0.6/raideng/eng_unix.cpp +@@ -188,7 +188,7 @@ extern dpt_sig_S engineSig; - struct i2o_cmd_psetget { - unsigned int iop; /* IOP unit number */ - unsigned int tid; /* Target device TID */ -- void __user *opbuf; /* Operation List buffer */ -+ void *opbuf; /* Operation List buffer */ - unsigned int oplen; /* Operation List buffer length in bytes */ -- void __user *resbuf; /* Result List buffer */ -- unsigned int __user *reslen; /* Result List buffer length in bytes */ -+ void *resbuf; /* Result List buffer */ -+ unsigned int *reslen; /* Result List buffer length in bytes */ - }; + /***************************** Main Entry Point *****************************/ - struct i2o_sw_xfer { -@@ -83,19 +75,19 @@ struct i2o_sw_xfer { - unsigned char flags; /* Flags field */ - unsigned char sw_type; /* Software type */ - unsigned int sw_id; /* Software ID */ -- void __user *buf; /* Pointer to software buffer */ -- unsigned int __user *swlen; /* Length of software data */ -- unsigned int __user *maxfrag; /* Maximum fragment count */ -- unsigned int __user *curfrag; /* Current fragment count */ -+ void *buf; /* Pointer to software buffer */ -+ unsigned int *swlen; /* Length of software data */ -+ unsigned int *maxfrag; /* Maximum fragment count */ -+ unsigned int *curfrag; /* Current fragment count */ - }; +-main(int argc, char *argv[]) ++int main(int argc, char *argv[]) + { + int Rtnval; + int Done; +@@ -265,7 +265,7 @@ main(int argc, char *argv[]) + else if (i == ERR_CONN_LIST_ALLOC) + printf("Alloc Connection List "); + else +- printf(" With Unknown Error %x", i); ++ printf(" With Unknown Error %lx", (unsigned long)i); + printf("Failed\n"); + } - struct i2o_html { - unsigned int iop; /* IOP unit number */ - unsigned int tid; /* Target device ID */ - unsigned int page; /* HTML page */ -- void __user *resbuf; /* Buffer for reply HTML page */ -- unsigned int __user *reslen; /* Length in bytes of reply buffer */ -- void __user *qbuf; /* Pointer to HTTP query string */ -+ void *resbuf; /* Buffer for reply HTML page */ -+ unsigned int *reslen; /* Length in bytes of reply buffer */ -+ void *qbuf; /* Pointer to HTTP query string */ - unsigned int qlen; /* Length in bytes of query string buffer */ - }; +@@ -410,7 +410,7 @@ main(int argc, char *argv[]) + // At the top of the loop, we will pull off and process all turnaround messages on the queue since + // they don't have to be sent down to the engine + // +- while(Rtnval = msgrcv(MsqID,(struct msgbuf *)&HdrBuff, MsgDataSize, DPT_TurnAroundKey,IPC_NOWAIT) != -1) ++ while((Rtnval = (msgrcv(MsqID,(struct msgbuf *)&HdrBuff, MsgDataSize, DPT_TurnAroundKey,IPC_NOWAIT) != -1))) + { + Done = ProcessTurnAroundMessage(&HdrBuff); + } +@@ -447,8 +447,8 @@ main(int argc, char *argv[]) + // Done is not set, so wait for a message to come in + // + else { +- while(Rtnval = msgrcv(MsqID,(struct msgbuf *)&HdrBuff, +- MsgDataSize, -DPT_EngineKey,0) == -1) ++ while((Rtnval = (msgrcv(MsqID,(struct msgbuf *)&HdrBuff, ++ MsgDataSize, -DPT_EngineKey,0) == -1))) + { -@@ -122,6 +114,10 @@ struct i2o_evt_get { - int lost; - }; + /* If The Message Failed, And The Reason Was Not An Interrupt, Exit */ +@@ -470,7 +470,7 @@ main(int argc, char *argv[]) + { + if(Verbose) + { +- printf("\n : Message received for PID %d : no process found, discarding", ++ printf("\n : Message received for PID %ld : no process found, discarding", + HdrBuff.callerID); + } + continue; +@@ -491,7 +491,7 @@ main(int argc, char *argv[]) -+typedef struct i2o_sg_io_hdr { -+ unsigned int flags; /* see I2O_DPT_SG_IO_FLAGS */ -+} i2o_sg_io_hdr_t; -+ - /************************************************************************** - * HRT related constants and structures - **************************************************************************/ -@@ -136,53 +132,53 @@ struct i2o_evt_get { - #define I2O_BUS_UNKNOWN 0x80 + /* Make Sure That We Could Attach */ - typedef struct _i2o_pci_bus { -- u8 PciFunctionNumber; -- u8 PciDeviceNumber; -- u8 PciBusNumber; -- u8 reserved; -- u16 PciVendorID; -- u16 PciDeviceID; -+ __u8 PciFunctionNumber; -+ __u8 PciDeviceNumber; -+ __u8 PciBusNumber; -+ __u8 reserved; -+ __u16 PciVendorID; -+ __u16 PciDeviceID; - } i2o_pci_bus; +- if((int)toEng_P != -1) ++ if((long)toEng_P != -1) + { + fromEng_P = toEng_P + HdrBuff.FromEngBuffOffset; - typedef struct _i2o_local_bus { -- u16 LbBaseIOPort; -- u16 reserved; -- u32 LbBaseMemoryAddress; -+ __u16 LbBaseIOPort; -+ __u16 reserved; -+ __u32 LbBaseMemoryAddress; - } i2o_local_bus; +@@ -501,11 +501,13 @@ main(int argc, char *argv[]) + FormatTimeString(TimeString,time(0)); + printf("\nEngine Calls : %s DPT_CallEngine",TimeString); + printf( +- "\n EngTag = %x, Event = %x, Target = %x", +- HdrBuff.engineTag,HdrBuff.engEvent,HdrBuff.targetTag); ++ "\n EngTag = %lx, Event = %lx, Target = %lx", ++ (unsigned long)HdrBuff.engineTag, ++ (unsigned long)HdrBuff.engEvent, ++ (unsigned long)HdrBuff.targetTag); + printf( +- "\n Offset = %x fromEng_P = %x toEng_P = %x", +- HdrBuff.FromEngBuffOffset, fromEng_P, toEng_P); ++ "\n Offset = %lx fromEng_P = %lx toEng_P = %lx", ++ HdrBuff.FromEngBuffOffset, (unsigned long)fromEng_P, (unsigned long)toEng_P); + /*#else + "\n EngTag = %x, Event = %x, Target = %x", + HdrBuff.engineTag,HdrBuff.engEvent,HdrBuff.targetTag); +@@ -534,7 +536,7 @@ main(int argc, char *argv[]) + { + if(Verbose) + { +- printf("\n : Returning message for PID %d : no process found, discarding", ++ printf("\n : Returning message for PID %ld : no process found, discarding", + HdrBuff.callerID); + } + continue; +@@ -687,7 +689,7 @@ int ProcessTurnAroundMessage(MsgHdr *Hdr + else { + if(Verbose) + { +- printf("\n : Returning message for PID %d : no process found, discarding", ++ printf("\n : Returning message for PID %ld : no process found, discarding", + HdrBuff_P->callerID); + } + } +--- raidutils-0.0.6.orig/raideng/i2otypes.h ++++ raidutils-0.0.6/raideng/i2otypes.h +@@ -1,4 +1,4 @@ +-/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2otypes.h 13 4/30/01 12:57p Salyzyn $ */ ++/* $Header$ */ + /**************************************************************** + * Copyright (c) 1996-2000 Distributed Processing Technology Corporation + * Copyright (c) 2000 Adaptec Corporation. +--- raidutils-0.0.6.orig/raideng/i2omstor.h ++++ raidutils-0.0.6/raideng/i2omstor.h +@@ -243,7 +243,7 @@ PRAGMA_PACK_PUSH + #define I2O_BSA_DEV_CAP_MULTI_PATH 0x00000002 + #define I2O_BSA_DEV_CAP_DYNAMIC_CAPACITY 0x00000004 + #define I2O_BSA_DEV_CAP_REMOVABLE_MEDIA 0x00000008 +-#define I2O_BSA_DEV_CAP_REMOVEABLE_DEVICE 0x00000010 ++#define I2O_BSA_DEV_CAP_REMOVABLE_DEVICE 0x00000010 + #define I2O_BSA_DEV_CAP_READ_ONLY 0x00000020 + #define I2O_BSA_DEV_CAP_LOCKOUT 0x00000040 + #define I2O_BSA_DEV_CAP_BOOT_BYPASS 0x00000080 +@@ -754,13 +754,13 @@ typedef U16 I2O_BSA_VERIFY_FLAGS; + #define I2O_BSA_ERROR_CORRECTION 0x0040 - typedef struct _i2o_isa_bus { -- u16 IsaBaseIOPort; -- u8 CSN; -- u8 reserved; -- u32 IsaBaseMemoryAddress; -+ __u16 IsaBaseIOPort; -+ __u8 CSN; -+ __u8 reserved; -+ __u32 IsaBaseMemoryAddress; - } i2o_isa_bus; - typedef struct _i2o_eisa_bus_info { -- u16 EisaBaseIOPort; -- u8 reserved; -- u8 EisaSlotNumber; -- u32 EisaBaseMemoryAddress; -+ __u16 EisaBaseIOPort; -+ __u8 reserved; -+ __u8 EisaSlotNumber; -+ __u32 EisaBaseMemoryAddress; - } i2o_eisa_bus; +-/* I2O BSA Removeable Media Identifier values */ ++/* I2O BSA Removable Media Identifier values */ - typedef struct _i2o_mca_bus { -- u16 McaBaseIOPort; -- u8 reserved; -- u8 McaSlotNumber; -- u32 McaBaseMemoryAddress; -+ __u16 McaBaseIOPort; -+ __u8 reserved; -+ __u8 McaSlotNumber; -+ __u32 McaBaseMemoryAddress; - } i2o_mca_bus; + typedef U32 I2O_BSA_MEDIA_ID; + #define I2O_BSA_MEDIA_ID_CURRENT_MOUNTED 0xFFFFFFFF - typedef struct _i2o_other_bus { -- u16 BaseIOPort; -- u16 reserved; -- u32 BaseMemoryAddress; -+ __u16 BaseIOPort; -+ __u16 reserved; -+ __u32 BaseMemoryAddress; - } i2o_other_bus; - typedef struct _i2o_hrt_entry { -- u32 adapter_id; -- u32 parent_tid:12; -- u32 state:4; -- u32 bus_num:8; -- u32 bus_type:8; -+ __u32 adapter_id; -+ __u32 parent_tid:12; -+ __u32 state:4; -+ __u32 bus_num:8; -+ __u32 bus_type:8; - union { - i2o_pci_bus pci_bus; - i2o_local_bus local_bus; -@@ -194,66 +190,66 @@ typedef struct _i2o_hrt_entry { - } i2o_hrt_entry; +-/* I2O BSA Removeable Media Load Flags */ ++/* I2O BSA Removable Media Load Flags */ - typedef struct _i2o_hrt { -- u16 num_entries; -- u8 entry_len; -- u8 hrt_version; -- u32 change_ind; -+ __u16 num_entries; -+ __u8 entry_len; -+ __u8 hrt_version; -+ __u32 change_ind; - i2o_hrt_entry hrt_entry[1]; - } i2o_hrt; + typedef U8 I2O_BSA_LOAD_FLAGS; + #define I2O_BSA_LOAD_FLAG_MEDIA_LOCK 0x80 +@@ -869,7 +869,7 @@ typedef struct _I2O_BSA_DEVICE_RESET_MES - typedef struct _i2o_lct_entry { -- u32 entry_size:16; -- u32 tid:12; -- u32 reserved:4; -- u32 change_ind; -- u32 device_flags; -- u32 class_id:12; -- u32 version:4; -- u32 vendor_id:16; -- u32 sub_class; -- u32 user_tid:12; -- u32 parent_tid:12; -- u32 bios_info:8; -- u8 identity_tag[8]; -- u32 event_capabilities; -+ __u32 entry_size:16; -+ __u32 tid:12; -+ __u32 reserved:4; -+ __u32 change_ind; -+ __u32 device_flags; -+ __u32 class_id:12; -+ __u32 version:4; -+ __u32 vendor_id:16; -+ __u32 sub_class; -+ __u32 user_tid:12; -+ __u32 parent_tid:12; -+ __u32 bios_info:8; -+ __u8 identity_tag[8]; -+ __u32 event_capabilities; - } i2o_lct_entry; + /****************************************************************************/ - typedef struct _i2o_lct { -- u32 table_size:16; -- u32 boot_tid:12; -- u32 lct_ver:4; -- u32 iop_flags; -- u32 change_ind; -+ __u32 table_size:16; -+ __u32 boot_tid:12; -+ __u32 lct_ver:4; -+ __u32 iop_flags; -+ __u32 change_ind; - i2o_lct_entry lct_entry[1]; - } i2o_lct; +-/* I2O BSA Media Eject for Removeable Media Message Frame */ ++/* I2O BSA Media Eject for Removable Media Message Frame */ - typedef struct _i2o_status_block { -- u16 org_id; -- u16 reserved; -- u16 iop_id:12; -- u16 reserved1:4; -- u16 host_unit_id; -- u16 segment_number:12; -- u16 i2o_version:4; -- u8 iop_state; -- u8 msg_type; -- u16 inbound_frame_size; -- u8 init_code; -- u8 reserved2; -- u32 max_inbound_frames; -- u32 cur_inbound_frames; -- u32 max_outbound_frames; -+ __u16 org_id; -+ __u16 reserved; -+ __u16 iop_id:12; -+ __u16 reserved1:4; -+ __u16 host_unit_id; -+ __u16 segment_number:12; -+ __u16 i2o_version:4; -+ __u8 iop_state; -+ __u8 msg_type; -+ __u16 inbound_frame_size; -+ __u8 init_code; -+ __u8 reserved2; -+ __u32 max_inbound_frames; -+ __u32 cur_inbound_frames; -+ __u32 max_outbound_frames; - char product_id[24]; -- u32 expected_lct_size; -- u32 iop_capabilities; -- u32 desired_mem_size; -- u32 current_mem_size; -- u32 current_mem_base; -- u32 desired_io_size; -- u32 current_io_size; -- u32 current_io_base; -- u32 reserved3:24; -- u32 cmd_status:8; -+ __u32 expected_lct_size; -+ __u32 iop_capabilities; -+ __u32 desired_mem_size; -+ __u32 current_mem_size; -+ __u32 current_mem_base; -+ __u32 desired_io_size; -+ __u32 current_io_size; -+ __u32 current_io_base; -+ __u32 reserved3:24; -+ __u32 cmd_status:8; - } i2o_status_block; + typedef struct _I2O_BSA_MEDIA_EJECT_MESSAGE { + I2O_MESSAGE_FRAME StdMessageFrame; +@@ -891,7 +891,7 @@ typedef struct _I2O_BSA_MEDIA_LOCK_MESSA - /* Event indicator mask flags */ -@@ -334,7 +330,7 @@ typedef struct _i2o_status_block { - #define I2O_CLASS_ATE_PERIPHERAL 0x061 - #define I2O_CLASS_FLOPPY_CONTROLLER 0x070 - #define I2O_CLASS_FLOPPY_DEVICE 0x071 --#define I2O_CLASS_BUS_ADAPTER_PORT 0x080 -+#define I2O_CLASS_BUS_ADAPTER 0x080 - #define I2O_CLASS_PEER_TRANSPORT_AGENT 0x090 - #define I2O_CLASS_PEER_TRANSPORT 0x091 - #define I2O_CLASS_END 0xfff -@@ -400,4 +396,26 @@ typedef struct _i2o_status_block { - #define ADAPTER_STATE_FAILED 0x10 - #define ADAPTER_STATE_FAULTED 0x11 + /****************************************************************************/ -+/* -+ * Software module types -+ */ -+#define I2O_SOFTWARE_MODULE_IRTOS 0x11 -+#define I2O_SOFTWARE_MODULE_IOP_PRIVATE 0x22 -+#define I2O_SOFTWARE_MODULE_IOP_CONFIG 0x23 -+ -+/* -+ * Vendors -+ */ -+#define I2O_VENDOR_DPT 0x001b -+ -+/* -+ * DPT / Adaptec specific values for i2o_sg_io_hdr flags. -+ */ -+#define I2O_DPT_SG_FLAG_INTERPRET 0x00010000 -+#define I2O_DPT_SG_FLAG_PHYSICAL 0x00020000 -+ -+#define I2O_DPT_FLASH_FRAG_SIZE 0x10000 -+#define I2O_DPT_FLASH_READ 0x0101 -+#define I2O_DPT_FLASH_WRITE 0x0102 -+ - #endif /* _I2O_DEV_H */ +-/* I2O BSA Media Mount for Removeable Media Message Frame */ ++/* I2O BSA Media Mount for Removable Media Message Frame */ + + typedef struct _I2O_BSA_MEDIA_MOUNT_MESSAGE { + I2O_MESSAGE_FRAME StdMessageFrame; +--- raidutils-0.0.6.orig/raideng/raid.h ++++ raidutils-0.0.6/raideng/raid.h +@@ -210,8 +210,8 @@ struct raidParent_S : public raidRange_S + #define FLG_REQ_SUPPRESS 0x8000 + + //permit - bit definitions +- // 1=Components can have removeable media +-#define FLG_COMP_REMOVEABLE 0x0001 ++ // 1=Components can have removable media ++#define FLG_COMP_REMOVABLE 0x0001 + // 1=Components can be emulated drives + #define FLG_COMP_EMULATED 0x0002 + // 1=Components must be from the same vendor +@@ -271,7 +271,7 @@ struct raidDef_S : public raidDefinition + + // Constructor/Destructor............................. + +- raidDef_S::raidDef_S(); ++ raidDef_S(); + + }; + #endif // c++ --- raidutils-0.0.6.orig/raideng/Makefile.in +++ raidutils-0.0.6/raideng/Makefile.in @@ -1,8 +1,9 @@ @@ -82413,998 +74013,9394 @@ - distclean-libtool distclean-tags + distclean-tags - dvi: dvi-am + dvi: dvi-am + +@@ -1120,18 +1160,38 @@ dvi-am: + + html: html-am + ++html-am: ++ + info: info-am + + info-am: + + install-data-am: + +-install-exec-am: install-binPROGRAMS ++install-dvi: install-dvi-am ++ ++install-dvi-am: ++ ++install-exec-am: install-sbinPROGRAMS ++ ++install-html: install-html-am ++ ++install-html-am: + + install-info: install-info-am + ++install-info-am: ++ + install-man: + ++install-pdf: install-pdf-am ++ ++install-pdf-am: ++ ++install-ps: install-ps-am ++ ++install-ps-am: ++ + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -1152,19 +1212,24 @@ ps: ps-am + + ps-am: + +-uninstall-am: uninstall-binPROGRAMS uninstall-info-am ++uninstall-am: uninstall-sbinPROGRAMS ++ ++.MAKE: install-am install-strip ++ ++.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ ++ clean-libtool clean-sbinPROGRAMS ctags distclean \ ++ distclean-compile distclean-generic distclean-libtool \ ++ distclean-tags distdir dvi dvi-am html html-am info info-am \ ++ install install-am install-data install-data-am install-dvi \ ++ install-dvi-am install-exec install-exec-am install-html \ ++ install-html-am install-info install-info-am install-man \ ++ install-pdf install-pdf-am install-ps install-ps-am \ ++ install-sbinPROGRAMS install-strip installcheck \ ++ installcheck-am installdirs maintainer-clean \ ++ maintainer-clean-generic mostlyclean mostlyclean-compile \ ++ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ ++ tags uninstall uninstall-am uninstall-sbinPROGRAMS + +-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ +- clean-generic clean-libtool ctags distclean distclean-compile \ +- distclean-generic distclean-libtool distclean-tags distdir dvi \ +- dvi-am html html-am info info-am install install-am \ +- install-binPROGRAMS install-data install-data-am install-exec \ +- install-exec-am install-info install-info-am install-man \ +- install-strip installcheck installcheck-am installdirs \ +- maintainer-clean maintainer-clean-generic mostlyclean \ +- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ +- pdf pdf-am ps ps-am tags uninstall uninstall-am \ +- uninstall-binPROGRAMS uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +--- raidutils-0.0.6.orig/include/get_info.h ++++ raidutils-0.0.6/include/get_info.h +@@ -263,8 +263,8 @@ const uLONG DPT_ENGINE_COMPATIBILITY = + // 1=The device is emulated drive 1 (D:) + // 0=The device is emulated drive 0 (C:) + #define FLG_DEV_EMU_01 0x0008 +- // 1=The device has removeable media +-#define FLG_DEV_REMOVEABLE 0x0010 ++ // 1=The device has removable media ++#define FLG_DEV_REMOVABLE 0x0010 + // 1=The device originates in a logical device list + // 0=The device originates in a physical object list + #define FLG_DEV_LOGICAL 0x0020 +@@ -364,6 +364,12 @@ const uLONG DPT_ENGINE_COMPATIBILITY = + #include "device.hh" + #include "raid_dev.hh" + ++ // use PACK for things that should be packed; ++ // PACK_A for things that you'd like packed by would give a ++ // warning on anything except an ARM if actually packed; and ++ // PACK_WAS if it used to be packed by this gave warnings ++ // everywhere so now it isn't. ++ + #undef PACK + #if (defined(__GNUC__)) + # define PACK __attribute__ ((packed)) +@@ -371,19 +377,27 @@ const uLONG DPT_ENGINE_COMPATIBILITY = + #define PACK + #endif + ++#ifdef __arm__ ++# define PACK_A PACK ++#else ++# define PACK_A ++#endif ++ ++#define PACK_WAS ++ + uSHORT flags2; // Supplemental flags word + uSHORT hbaIndex; // HBA index # (slot #) + uSHORT hbaFlags; // HBA flags - see bit definitions below + #if defined (_DPT_STRICT_ALIGN) + uSHORT sniAdjust3; + #endif +- uLONG magicNum PACK; // RAID magic # +- uLONG hbaTag PACK; // Reserved for future expansion +- uLONG flags3 PACK; // Miscellaneous flags - see bit definitions above +- uSHORT busSpeed PACK; // Negotiated bus speed (in Mhz) +- uCHAR p2Flags PACK; // Path 2 flags - see bit definitions above +- uCHAR reserved4 PACK; // Reserved for future expansion +- uLONG availableCapacity PACK; // Reserved for future expansion ++ uLONG magicNum PACK; // RAID magic # ++ uLONG hbaTag PACK; // Reserved for future expansion ++ uLONG flags3 PACK; // Miscellaneous flags - see bit definitions above ++ uSHORT busSpeed PACK; // Negotiated bus speed (in Mhz) ++ uCHAR p2Flags PACK_WAS; // Path 2 flags - see bit definitions above ++ uCHAR reserved4 PACK_WAS; // Reserved for future expansion ++ uLONG availableCapacity PACK; // Reserved for future expansion + + uCHAR udmaModeSupported;// The maximum UDMA mode supported + uCHAR udmaModeSelected; // The current operational UDMA mode +--- raidutils-0.0.6.orig/include/device.hh ++++ raidutils-0.0.6/include/device.hh +@@ -27,6 +27,14 @@ + */ + + // Data unique to every engine device ++ ++ ++// use PACK for things that should be packed; ++// PACK_A for things that you'd like packed by would give a ++// warning on anything except an ARM if actually packed; and ++// PACK_WAS if it used to be packed by this gave warnings ++// everywhere so now it isn't. ++ + #undef PACK + #if (defined(__GNUC__)) + # define PACK __attribute__ ((packed)) +@@ -34,11 +42,17 @@ + #define PACK + #endif + ++#ifdef __arm__ ++# define PACK_A PACK ++#else ++# define PACK_A ++#endif ++ + uSHORT scsiOffset; // 0=Async mode + // Non-zero = SCSI offset + uSHORT xfrSpeed; // SCSI transfer speed +-dptCcapacity_S capacity PACK; // Device capacity +-dptCemuParam_S emulation PACK; // Emulated drive parameters ++dptCcapacity_S capacity PACK_A; // Device capacity ++dptCemuParam_S emulation PACK_A; // Emulated drive parameters + // DPT specific name (ASCII string) + // (Up to 8 valid chars + NULL terminator + 1) + uCHAR dptName[DPT_NAME_SIZE+2]; +--- raidutils-0.0.6.orig/include/mgr.hh ++++ raidutils-0.0.6/include/mgr.hh +@@ -34,8 +34,8 @@ + #define PACK + #endif + +- dptCaddr_S maxAddr PACK; // Maximum physical address supported +- dptCaddr_S minAddr PACK; // Minimum physical address supported ++ dptCaddr_S maxAddr PACK_A; // Maximum physical address supported ++ dptCaddr_S minAddr PACK_A; // Minimum physical address supported + + // RAID manager information (Ignore if not a RAID manager) + +--- raidutils-0.0.6.orig/include/messages.h ++++ raidutils-0.0.6/include/messages.h +@@ -1656,7 +1656,7 @@ + #define MSG_DOWNLOAD_FW 0x0076L + // + // Description: +-// Downloads FW code to an HBA's non-removeable DASD devices. ++// Downloads FW code to an HBA's non-removable DASD devices. + // + // Target Types: 0 + // Input Data: Download cmd (uLONG) +--- raidutils-0.0.6.orig/include/ctlr_map.hpp ++++ raidutils-0.0.6/include/ctlr_map.hpp +@@ -40,9 +40,12 @@ + * Description: + * Version Control: + * +-* $Revision: 17 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:19:50 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ + + #ifndef _NFILE +--- raidutils-0.0.6.orig/include/rtncodes.h ++++ raidutils-0.0.6/include/rtncodes.h +@@ -496,7 +496,7 @@ + // Errors downloading firmware + //--------------------------------------------------------------------------- + +- // There are no non-removeable DASD devices to store the FW code. ++ // There are no non-removable DASD devices to store the FW code. + #define ERR_FWD_NO_SPACE (0x01f0L | MSG_RTN_FAILED) + + // There are only DASD devices without sufficient space reserved +@@ -517,8 +517,8 @@ + // Errors reserving disk space + //--------------------------------------------------------------------------- + +- // Cannot reserve disk space on a removeable media device +-#define ERR_RSV_REMOVEABLE (0x0200L | MSG_RTN_FAILED) ++ // Cannot reserve disk space on a removable media device ++#define ERR_RSV_REMOVABLE (0x0200L | MSG_RTN_FAILED) + // Cannot reserve disk space on a non-DASD device + #define ERR_RSV_NOT_DASD (0x0201L | MSG_RTN_FAILED) + // The # of blocks reserved must be greater than zero +--- raidutils-0.0.6.orig/include/dpt_scsi.h ++++ raidutils-0.0.6/include/dpt_scsi.h +@@ -757,7 +757,7 @@ + void setLba(uLONG inLong) { setU1(this,3,inLong); + setU1(this,2,inLong >> 8); + setU1(this,1,((inLong >> 16L) & 0x1F) +- | ((scReadWrite6_S __FAR__ *)(this))->getLun() & 0xE0); } ++ | (((scReadWrite6_S __FAR__ *)(this))->getLun() & 0xE0)); } + # define scReadWrite6_setLba(this,inLong) ((scReadWrite6_S __FAR__ *)(this))->setLba(inLong) + + uSHORT getLength() { return getU1(this,4); } +--- raidutils-0.0.6.orig/include/hba.hh ++++ raidutils-0.0.6/include/hba.hh +@@ -34,13 +34,13 @@ + #define PACK + #endif + +- dptIOaddr_U ioAddr PACK; // EISA/ISA/PCI address ++ dptIOaddr_U ioAddr PACK_A; // EISA/ISA/PCI address + uSHORT drvrRefNum; // Number by which the driver ref- + // erences this HBA + #if defined (_DPT_STRICT_ALIGN) + uSHORT sniAdjust4; + #endif +- dptHBAid_U id PACK; // EISA = ID PAL bytes ++ dptHBAid_U id PACK_A; // EISA = ID PAL bytes + // ISA = Not used + // PCI = vendor ID, product ID + uSHORT drqNum; // DRQ # (0,5,6,7,0xffff=invalid) +@@ -80,7 +80,7 @@ + uCHAR raidID; // Software selectable RAID ID # + uCHAR slotID; // Slot specific RAID ID # + +- dptChanInfo_S chanInfo[NUM_CHAN_INFO] PACK; // SCSI channel info (multi-channel boards) ++ dptChanInfo_S chanInfo[NUM_CHAN_INFO] PACK_A; // SCSI channel info (multi-channel boards) + + uCHAR excludeStart; + uCHAR excludeEnd; +--- raidutils-0.0.6.orig/include/linux/i2o-dev.h ++++ raidutils-0.0.6/include/linux/i2o-dev.h +@@ -13,32 +13,24 @@ + * This header file defines the I2O APIs that are available to both + * the kernel and user level applications. Kernel specific structures + * are defined in i2o_osm. OSMs should include _only_ i2o_osm.h which +- * automatically includs this file. ++ * automatically includes this file. + * + */ + + #ifndef _I2O_DEV_H + #define _I2O_DEV_H + +-#define __user + /* How many controllers are we allowing */ + #define MAX_I2O_CONTROLLERS 32 + +-#include +- +-#ifndef __KERNEL__ +- +-typedef unsigned char u8; +-typedef unsigned short u16; +-typedef unsigned int u32; +- +-#endif /* __KERNEL__ */ ++#include ++#include + + /* + * I2O Control IOCTLs and structures + */ + #define I2O_MAGIC_NUMBER 'i' +-#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,u8[MAX_I2O_CONTROLLERS]) ++#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,__u8[MAX_I2O_CONTROLLERS]) + #define I2OHRTGET _IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct) + #define I2OLCTGET _IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct) + #define I2OPARMSET _IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget) +@@ -46,7 +38,7 @@ typedef unsigned int u32; + #define I2OSWDL _IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer) + #define I2OSWUL _IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer) + #define I2OSWDEL _IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer) +-#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,u32) ++#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,__u32) + #define I2OHTML _IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html) + #define I2OEVTREG _IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id) + #define I2OEVTGET _IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info) +@@ -55,27 +47,27 @@ typedef unsigned int u32; + + struct i2o_cmd_passthru32 { + unsigned int iop; /* IOP unit number */ +- u32 msg; /* message */ ++ __u32 msg; /* message */ + }; + + struct i2o_cmd_passthru { + unsigned int iop; /* IOP unit number */ +- void __user *msg; /* message */ ++ void *msg; /* message */ + }; + + struct i2o_cmd_hrtlct { + unsigned int iop; /* IOP unit number */ +- void __user *resbuf; /* Buffer for result */ +- unsigned int __user *reslen; /* Buffer length in bytes */ ++ void *resbuf; /* Buffer for result */ ++ unsigned int *reslen; /* Buffer length in bytes */ + }; + + struct i2o_cmd_psetget { + unsigned int iop; /* IOP unit number */ + unsigned int tid; /* Target device TID */ +- void __user *opbuf; /* Operation List buffer */ ++ void *opbuf; /* Operation List buffer */ + unsigned int oplen; /* Operation List buffer length in bytes */ +- void __user *resbuf; /* Result List buffer */ +- unsigned int __user *reslen; /* Result List buffer length in bytes */ ++ void *resbuf; /* Result List buffer */ ++ unsigned int *reslen; /* Result List buffer length in bytes */ + }; + + struct i2o_sw_xfer { +@@ -83,19 +75,19 @@ struct i2o_sw_xfer { + unsigned char flags; /* Flags field */ + unsigned char sw_type; /* Software type */ + unsigned int sw_id; /* Software ID */ +- void __user *buf; /* Pointer to software buffer */ +- unsigned int __user *swlen; /* Length of software data */ +- unsigned int __user *maxfrag; /* Maximum fragment count */ +- unsigned int __user *curfrag; /* Current fragment count */ ++ void *buf; /* Pointer to software buffer */ ++ unsigned int *swlen; /* Length of software data */ ++ unsigned int *maxfrag; /* Maximum fragment count */ ++ unsigned int *curfrag; /* Current fragment count */ + }; + + struct i2o_html { + unsigned int iop; /* IOP unit number */ + unsigned int tid; /* Target device ID */ + unsigned int page; /* HTML page */ +- void __user *resbuf; /* Buffer for reply HTML page */ +- unsigned int __user *reslen; /* Length in bytes of reply buffer */ +- void __user *qbuf; /* Pointer to HTTP query string */ ++ void *resbuf; /* Buffer for reply HTML page */ ++ unsigned int *reslen; /* Length in bytes of reply buffer */ ++ void *qbuf; /* Pointer to HTTP query string */ + unsigned int qlen; /* Length in bytes of query string buffer */ + }; + +@@ -122,6 +114,10 @@ struct i2o_evt_get { + int lost; + }; + ++typedef struct i2o_sg_io_hdr { ++ unsigned int flags; /* see I2O_DPT_SG_IO_FLAGS */ ++} i2o_sg_io_hdr_t; ++ + /************************************************************************** + * HRT related constants and structures + **************************************************************************/ +@@ -136,53 +132,53 @@ struct i2o_evt_get { + #define I2O_BUS_UNKNOWN 0x80 + + typedef struct _i2o_pci_bus { +- u8 PciFunctionNumber; +- u8 PciDeviceNumber; +- u8 PciBusNumber; +- u8 reserved; +- u16 PciVendorID; +- u16 PciDeviceID; ++ __u8 PciFunctionNumber; ++ __u8 PciDeviceNumber; ++ __u8 PciBusNumber; ++ __u8 reserved; ++ __u16 PciVendorID; ++ __u16 PciDeviceID; + } i2o_pci_bus; + + typedef struct _i2o_local_bus { +- u16 LbBaseIOPort; +- u16 reserved; +- u32 LbBaseMemoryAddress; ++ __u16 LbBaseIOPort; ++ __u16 reserved; ++ __u32 LbBaseMemoryAddress; + } i2o_local_bus; + + typedef struct _i2o_isa_bus { +- u16 IsaBaseIOPort; +- u8 CSN; +- u8 reserved; +- u32 IsaBaseMemoryAddress; ++ __u16 IsaBaseIOPort; ++ __u8 CSN; ++ __u8 reserved; ++ __u32 IsaBaseMemoryAddress; + } i2o_isa_bus; + + typedef struct _i2o_eisa_bus_info { +- u16 EisaBaseIOPort; +- u8 reserved; +- u8 EisaSlotNumber; +- u32 EisaBaseMemoryAddress; ++ __u16 EisaBaseIOPort; ++ __u8 reserved; ++ __u8 EisaSlotNumber; ++ __u32 EisaBaseMemoryAddress; + } i2o_eisa_bus; + + typedef struct _i2o_mca_bus { +- u16 McaBaseIOPort; +- u8 reserved; +- u8 McaSlotNumber; +- u32 McaBaseMemoryAddress; ++ __u16 McaBaseIOPort; ++ __u8 reserved; ++ __u8 McaSlotNumber; ++ __u32 McaBaseMemoryAddress; + } i2o_mca_bus; + + typedef struct _i2o_other_bus { +- u16 BaseIOPort; +- u16 reserved; +- u32 BaseMemoryAddress; ++ __u16 BaseIOPort; ++ __u16 reserved; ++ __u32 BaseMemoryAddress; + } i2o_other_bus; + + typedef struct _i2o_hrt_entry { +- u32 adapter_id; +- u32 parent_tid:12; +- u32 state:4; +- u32 bus_num:8; +- u32 bus_type:8; ++ __u32 adapter_id; ++ __u32 parent_tid:12; ++ __u32 state:4; ++ __u32 bus_num:8; ++ __u32 bus_type:8; + union { + i2o_pci_bus pci_bus; + i2o_local_bus local_bus; +@@ -194,66 +190,66 @@ typedef struct _i2o_hrt_entry { + } i2o_hrt_entry; + + typedef struct _i2o_hrt { +- u16 num_entries; +- u8 entry_len; +- u8 hrt_version; +- u32 change_ind; ++ __u16 num_entries; ++ __u8 entry_len; ++ __u8 hrt_version; ++ __u32 change_ind; + i2o_hrt_entry hrt_entry[1]; + } i2o_hrt; + + typedef struct _i2o_lct_entry { +- u32 entry_size:16; +- u32 tid:12; +- u32 reserved:4; +- u32 change_ind; +- u32 device_flags; +- u32 class_id:12; +- u32 version:4; +- u32 vendor_id:16; +- u32 sub_class; +- u32 user_tid:12; +- u32 parent_tid:12; +- u32 bios_info:8; +- u8 identity_tag[8]; +- u32 event_capabilities; ++ __u32 entry_size:16; ++ __u32 tid:12; ++ __u32 reserved:4; ++ __u32 change_ind; ++ __u32 device_flags; ++ __u32 class_id:12; ++ __u32 version:4; ++ __u32 vendor_id:16; ++ __u32 sub_class; ++ __u32 user_tid:12; ++ __u32 parent_tid:12; ++ __u32 bios_info:8; ++ __u8 identity_tag[8]; ++ __u32 event_capabilities; + } i2o_lct_entry; + + typedef struct _i2o_lct { +- u32 table_size:16; +- u32 boot_tid:12; +- u32 lct_ver:4; +- u32 iop_flags; +- u32 change_ind; ++ __u32 table_size:16; ++ __u32 boot_tid:12; ++ __u32 lct_ver:4; ++ __u32 iop_flags; ++ __u32 change_ind; + i2o_lct_entry lct_entry[1]; + } i2o_lct; -@@ -1120,18 +1160,38 @@ dvi-am: + typedef struct _i2o_status_block { +- u16 org_id; +- u16 reserved; +- u16 iop_id:12; +- u16 reserved1:4; +- u16 host_unit_id; +- u16 segment_number:12; +- u16 i2o_version:4; +- u8 iop_state; +- u8 msg_type; +- u16 inbound_frame_size; +- u8 init_code; +- u8 reserved2; +- u32 max_inbound_frames; +- u32 cur_inbound_frames; +- u32 max_outbound_frames; ++ __u16 org_id; ++ __u16 reserved; ++ __u16 iop_id:12; ++ __u16 reserved1:4; ++ __u16 host_unit_id; ++ __u16 segment_number:12; ++ __u16 i2o_version:4; ++ __u8 iop_state; ++ __u8 msg_type; ++ __u16 inbound_frame_size; ++ __u8 init_code; ++ __u8 reserved2; ++ __u32 max_inbound_frames; ++ __u32 cur_inbound_frames; ++ __u32 max_outbound_frames; + char product_id[24]; +- u32 expected_lct_size; +- u32 iop_capabilities; +- u32 desired_mem_size; +- u32 current_mem_size; +- u32 current_mem_base; +- u32 desired_io_size; +- u32 current_io_size; +- u32 current_io_base; +- u32 reserved3:24; +- u32 cmd_status:8; ++ __u32 expected_lct_size; ++ __u32 iop_capabilities; ++ __u32 desired_mem_size; ++ __u32 current_mem_size; ++ __u32 current_mem_base; ++ __u32 desired_io_size; ++ __u32 current_io_size; ++ __u32 current_io_base; ++ __u32 reserved3:24; ++ __u32 cmd_status:8; + } i2o_status_block; - html: html-am + /* Event indicator mask flags */ +@@ -334,7 +330,7 @@ typedef struct _i2o_status_block { + #define I2O_CLASS_ATE_PERIPHERAL 0x061 + #define I2O_CLASS_FLOPPY_CONTROLLER 0x070 + #define I2O_CLASS_FLOPPY_DEVICE 0x071 +-#define I2O_CLASS_BUS_ADAPTER_PORT 0x080 ++#define I2O_CLASS_BUS_ADAPTER 0x080 + #define I2O_CLASS_PEER_TRANSPORT_AGENT 0x090 + #define I2O_CLASS_PEER_TRANSPORT 0x091 + #define I2O_CLASS_END 0xfff +@@ -400,4 +396,26 @@ typedef struct _i2o_status_block { + #define ADAPTER_STATE_FAILED 0x10 + #define ADAPTER_STATE_FAULTED 0x11 -+html-am: ++/* ++ * Software module types ++ */ ++#define I2O_SOFTWARE_MODULE_IRTOS 0x11 ++#define I2O_SOFTWARE_MODULE_IOP_PRIVATE 0x22 ++#define I2O_SOFTWARE_MODULE_IOP_CONFIG 0x23 ++ ++/* ++ * Vendors ++ */ ++#define I2O_VENDOR_DPT 0x001b ++ ++/* ++ * DPT / Adaptec specific values for i2o_sg_io_hdr flags. ++ */ ++#define I2O_DPT_SG_FLAG_INTERPRET 0x00010000 ++#define I2O_DPT_SG_FLAG_PHYSICAL 0x00020000 ++ ++#define I2O_DPT_FLASH_FRAG_SIZE 0x10000 ++#define I2O_DPT_FLASH_READ 0x0101 ++#define I2O_DPT_FLASH_WRITE 0x0102 ++ + #endif /* _I2O_DEV_H */ +--- /dev/null ++++ raidutils-0.0.6/m4/lt~obsolete.m4 +@@ -0,0 +1,92 @@ ++# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- ++# ++# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. ++# Written by Scott James Remnant, 2004. ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# serial 4 lt~obsolete.m4 ++ ++# These exist entirely to fool aclocal when bootstrapping libtool. ++# ++# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) ++# which have later been changed to m4_define as they aren't part of the ++# exported API, or moved to Autoconf or Automake where they belong. ++# ++# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN ++# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us ++# using a macro with the same name in our local m4/libtool.m4 it'll ++# pull the old libtool.m4 in (it doesn't see our shiny new m4_define ++# and doesn't know about Autoconf macros at all.) ++# ++# So we provide this file, which has a silly filename so it's always ++# included after everything else. This provides aclocal with the ++# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything ++# because those macros already exist, or will be overwritten later. ++# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. ++# ++# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. ++# Yes, that means every name once taken will need to remain here until ++# we give up compatibility with versions before 1.7, at which point ++# we need to keep only those names which we still refer to. ++ ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) ++ ++m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) ++m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) ++m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) ++m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) ++m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) ++m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) ++m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) ++m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) ++m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) ++m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) ++m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) ++m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) ++m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) ++m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) ++m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) ++m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) ++m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) ++m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) ++m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) ++m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) ++m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) ++m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) ++m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) ++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) ++m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) ++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) ++m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) ++m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) ++m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) ++m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) ++m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) ++m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) ++m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) ++m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) ++m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) ++m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) ++m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) ++m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) ++m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) ++m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) ++m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) ++m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) ++m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) ++m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) ++m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +--- /dev/null ++++ raidutils-0.0.6/m4/ltoptions.m4 +@@ -0,0 +1,368 @@ ++# Helper functions for option handling. -*- Autoconf -*- ++# ++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gary V. Vaughan, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# serial 6 ltoptions.m4 ++ ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) ++ ++ ++# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) ++# ------------------------------------------ ++m4_define([_LT_MANGLE_OPTION], ++[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) ++ ++ ++# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) ++# --------------------------------------- ++# Set option OPTION-NAME for macro MACRO-NAME, and if there is a ++# matching handler defined, dispatch to it. Other OPTION-NAMEs are ++# saved as a flag. ++m4_define([_LT_SET_OPTION], ++[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl ++m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), ++ _LT_MANGLE_DEFUN([$1], [$2]), ++ [m4_warning([Unknown $1 option `$2'])])[]dnl ++]) ++ ++ ++# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------------------------ ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++m4_define([_LT_IF_OPTION], ++[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) ++ ++ ++# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) ++# ------------------------------------------------------- ++# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME ++# are set. ++m4_define([_LT_UNLESS_OPTIONS], ++[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), ++ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), ++ [m4_define([$0_found])])])[]dnl ++m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ++])[]dnl ++]) ++ ++ ++# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) ++# ---------------------------------------- ++# OPTION-LIST is a space-separated list of Libtool options associated ++# with MACRO-NAME. If any OPTION has a matching handler declared with ++# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about ++# the unknown option and exit. ++m4_defun([_LT_SET_OPTIONS], ++[# Set options ++m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), ++ [_LT_SET_OPTION([$1], _LT_Option)]) ++ ++m4_if([$1],[LT_INIT],[ ++ dnl ++ dnl Simply set some default values (i.e off) if boolean options were not ++ dnl specified: ++ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ++ ]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ++ ]) ++ dnl ++ dnl If no reference was made to various pairs of opposing options, then ++ dnl we run the default mode handler for the pair. For example, if neither ++ dnl `shared' nor `disable-shared' was passed, we enable building of shared ++ dnl archives by default: ++ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], ++ [_LT_ENABLE_FAST_INSTALL]) ++ ]) ++])# _LT_SET_OPTIONS ++ ++ ++## --------------------------------- ## ++## Macros to handle LT_INIT options. ## ++## --------------------------------- ## ++ ++# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) ++# ----------------------------------------- ++m4_define([_LT_MANGLE_DEFUN], ++[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) ++ ++ ++# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) ++# ----------------------------------------------- ++m4_define([LT_OPTION_DEFINE], ++[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ++])# LT_OPTION_DEFINE ++ ++ ++# dlopen ++# ------ ++LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ++]) ++ ++AU_DEFUN([AC_LIBTOOL_DLOPEN], ++[_LT_SET_OPTION([LT_INIT], [dlopen]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `dlopen' option into LT_INIT's first parameter.]) ++]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) ++ ++ ++# win32-dll ++# --------- ++# Declare package support for building win32 dll's. ++LT_OPTION_DEFINE([LT_INIT], [win32-dll], ++[enable_win32_dll=yes ++ ++case $host in ++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) ++ AC_CHECK_TOOL(AS, as, false) ++ AC_CHECK_TOOL(DLLTOOL, dlltool, false) ++ AC_CHECK_TOOL(OBJDUMP, objdump, false) ++ ;; ++esac ++ ++test -z "$AS" && AS=as ++_LT_DECL([], [AS], [0], [Assembler program])dnl ++ ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl ++ ++test -z "$OBJDUMP" && OBJDUMP=objdump ++_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl ++])# win32-dll ++ ++AU_DEFUN([AC_LIBTOOL_WIN32_DLL], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++_LT_SET_OPTION([LT_INIT], [win32-dll]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `win32-dll' option into LT_INIT's first parameter.]) ++]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) ++ ++ ++# _LT_ENABLE_SHARED([DEFAULT]) ++# ---------------------------- ++# implement the --enable-shared flag, and supports the `shared' and ++# `disable-shared' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_SHARED], ++[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([shared], ++ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], ++ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) ++ ++ _LT_DECL([build_libtool_libs], [enable_shared], [0], ++ [Whether or not to build shared libraries]) ++])# _LT_ENABLE_SHARED ++ ++LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) ++ ++# Old names: ++AC_DEFUN([AC_ENABLE_SHARED], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ++]) ++ ++AC_DEFUN([AC_DISABLE_SHARED], ++[_LT_SET_OPTION([LT_INIT], [disable-shared]) ++]) ++ ++AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) ++AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_ENABLE_SHARED], []) ++dnl AC_DEFUN([AM_DISABLE_SHARED], []) ++ ++ ++ ++# _LT_ENABLE_STATIC([DEFAULT]) ++# ---------------------------- ++# implement the --enable-static flag, and support the `static' and ++# `disable-static' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_STATIC], ++[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([static], ++ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], ++ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_static=]_LT_ENABLE_STATIC_DEFAULT) ++ ++ _LT_DECL([build_old_libs], [enable_static], [0], ++ [Whether or not to build static libraries]) ++])# _LT_ENABLE_STATIC ++ ++LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) ++ ++# Old names: ++AC_DEFUN([AC_ENABLE_STATIC], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ++]) ++ ++AC_DEFUN([AC_DISABLE_STATIC], ++[_LT_SET_OPTION([LT_INIT], [disable-static]) ++]) ++ ++AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) ++AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_ENABLE_STATIC], []) ++dnl AC_DEFUN([AM_DISABLE_STATIC], []) ++ ++ ++ ++# _LT_ENABLE_FAST_INSTALL([DEFAULT]) ++# ---------------------------------- ++# implement the --enable-fast-install flag, and support the `fast-install' ++# and `disable-fast-install' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_FAST_INSTALL], ++[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([fast-install], ++ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], ++ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) ++ ++_LT_DECL([fast_install], [enable_fast_install], [0], ++ [Whether or not to optimize for fast installation])dnl ++])# _LT_ENABLE_FAST_INSTALL ++ ++LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) ++ ++# Old names: ++AU_DEFUN([AC_ENABLE_FAST_INSTALL], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `fast-install' option into LT_INIT's first parameter.]) ++]) ++ ++AU_DEFUN([AC_DISABLE_FAST_INSTALL], ++[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `disable-fast-install' option into LT_INIT's first parameter.]) ++]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) ++dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) ++ ++ ++# _LT_WITH_PIC([MODE]) ++# -------------------- ++# implement the --with-pic flag, and support the `pic-only' and `no-pic' ++# LT_INIT options. ++# MODE is either `yes' or `no'. If omitted, it defaults to `both'. ++m4_define([_LT_WITH_PIC], ++[AC_ARG_WITH([pic], ++ [AS_HELP_STRING([--with-pic], ++ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], ++ [pic_mode="$withval"], ++ [pic_mode=default]) ++ ++test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) ++ ++_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ++])# _LT_WITH_PIC ++ ++LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) ++ ++# Old name: ++AU_DEFUN([AC_LIBTOOL_PICMODE], ++[_LT_SET_OPTION([LT_INIT], [pic-only]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `pic-only' option into LT_INIT's first parameter.]) ++]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ++ ++## ----------------- ## ++## LTDL_INIT Options ## ++## ----------------- ## ++ ++m4_define([_LTDL_MODE], []) ++LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], ++ [m4_define([_LTDL_MODE], [nonrecursive])]) ++LT_OPTION_DEFINE([LTDL_INIT], [recursive], ++ [m4_define([_LTDL_MODE], [recursive])]) ++LT_OPTION_DEFINE([LTDL_INIT], [subproject], ++ [m4_define([_LTDL_MODE], [subproject])]) ++ ++m4_define([_LTDL_TYPE], []) ++LT_OPTION_DEFINE([LTDL_INIT], [installable], ++ [m4_define([_LTDL_TYPE], [installable])]) ++LT_OPTION_DEFINE([LTDL_INIT], [convenience], ++ [m4_define([_LTDL_TYPE], [convenience])]) +--- /dev/null ++++ raidutils-0.0.6/m4/ltversion.m4 +@@ -0,0 +1,23 @@ ++# ltversion.m4 -- version numbers -*- Autoconf -*- ++# ++# Copyright (C) 2004 Free Software Foundation, Inc. ++# Written by Scott James Remnant, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# Generated from ltversion.in. ++ ++# serial 3017 ltversion.m4 ++# This file is part of GNU Libtool ++ ++m4_define([LT_PACKAGE_VERSION], [2.2.6b]) ++m4_define([LT_PACKAGE_REVISION], [1.3017]) ++ ++AC_DEFUN([LTVERSION_VERSION], ++[macro_version='2.2.6b' ++macro_revision='1.3017' ++_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) ++_LT_DECL(, macro_revision, 0) ++]) +--- /dev/null ++++ raidutils-0.0.6/m4/libtool.m4 +@@ -0,0 +1,7377 @@ ++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++m4_define([_LT_COPYING], [dnl ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is part of GNU Libtool. ++# ++# GNU Libtool is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or ++# obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++]) ++ ++# serial 56 LT_INIT ++ ++ ++# LT_PREREQ(VERSION) ++# ------------------ ++# Complain and exit if this libtool version is less that VERSION. ++m4_defun([LT_PREREQ], ++[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, ++ [m4_default([$3], ++ [m4_fatal([Libtool version $1 or higher is required], ++ 63)])], ++ [$2])]) ++ ++ ++# _LT_CHECK_BUILDDIR ++# ------------------ ++# Complain if the absolute build directory name contains unusual characters ++m4_defun([_LT_CHECK_BUILDDIR], ++[case `pwd` in ++ *\ * | *\ *) ++ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; ++esac ++]) ++ ++ ++# LT_INIT([OPTIONS]) ++# ------------------ ++AC_DEFUN([LT_INIT], ++[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT ++AC_BEFORE([$0], [LT_LANG])dnl ++AC_BEFORE([$0], [LT_OUTPUT])dnl ++AC_BEFORE([$0], [LTDL_INIT])dnl ++m4_require([_LT_CHECK_BUILDDIR])dnl ++ ++dnl Autoconf doesn't catch unexpanded LT_ macros by default: ++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl ++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl ++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 ++dnl unless we require an AC_DEFUNed macro: ++AC_REQUIRE([LTOPTIONS_VERSION])dnl ++AC_REQUIRE([LTSUGAR_VERSION])dnl ++AC_REQUIRE([LTVERSION_VERSION])dnl ++AC_REQUIRE([LTOBSOLETE_VERSION])dnl ++m4_require([_LT_PROG_LTMAIN])dnl ++ ++dnl Parse OPTIONS ++_LT_SET_OPTIONS([$0], [$1]) ++ ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" ++ ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++AC_SUBST(LIBTOOL)dnl ++ ++_LT_SETUP ++ ++# Only expand once: ++m4_define([LT_INIT]) ++])# LT_INIT ++ ++# Old names: ++AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) ++AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_PROG_LIBTOOL], []) ++dnl AC_DEFUN([AM_PROG_LIBTOOL], []) ++ ++ ++# _LT_CC_BASENAME(CC) ++# ------------------- ++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. ++m4_defun([_LT_CC_BASENAME], ++[for cc_temp in $1""; do ++ case $cc_temp in ++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; ++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++]) ++ ++ ++# _LT_FILEUTILS_DEFAULTS ++# ---------------------- ++# It is okay to use these file commands and assume they have been set ++# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. ++m4_defun([_LT_FILEUTILS_DEFAULTS], ++[: ${CP="cp -f"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++])# _LT_FILEUTILS_DEFAULTS ++ ++ ++# _LT_SETUP ++# --------- ++m4_defun([_LT_SETUP], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++_LT_DECL([], [host_alias], [0], [The host system])dnl ++_LT_DECL([], [host], [0])dnl ++_LT_DECL([], [host_os], [0])dnl ++dnl ++_LT_DECL([], [build_alias], [0], [The build system])dnl ++_LT_DECL([], [build], [0])dnl ++_LT_DECL([], [build_os], [0])dnl ++dnl ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([LT_PATH_LD])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++dnl ++AC_REQUIRE([AC_PROG_LN_S])dnl ++test -z "$LN_S" && LN_S="ln -s" ++_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl ++dnl ++AC_REQUIRE([LT_CMD_MAX_LEN])dnl ++_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl ++_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl ++dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_CHECK_SHELL_FEATURES])dnl ++m4_require([_LT_CMD_RELOAD])dnl ++m4_require([_LT_CHECK_MAGIC_METHOD])dnl ++m4_require([_LT_CMD_OLD_ARCHIVE])dnl ++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++ ++_LT_CONFIG_LIBTOOL_INIT([ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes INIT. ++if test -n "\${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++]) ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++ ++_LT_CHECK_OBJDIR ++ ++m4_require([_LT_TAG_COMPILER])dnl ++_LT_PROG_ECHO_BACKSLASH ++ ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++ fi ++ ;; ++esac ++ ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++sed_quote_subst='s/$[["`$\\]]$/\\\1/g' ++ ++# Same as above, but do not quote variable references. ++double_quote_subst='s/$[["`\\]]$/\\\1/g' ++ ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' ++ ++# Sed substitution to delay expansion of an escaped single quote. ++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' ++ ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' ++ ++# Global variables: ++ofile=libtool ++can_build_shared=yes ++ ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a ++ ++with_gnu_ld="$lt_cv_prog_gnu_ld" ++ ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" ++ ++# Set sane defaults for various variables ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$LD" && LD=ld ++test -z "$ac_objext" && ac_objext=o ++ ++_LT_CC_BASENAME([$compiler]) ++ ++# Only perform the check for file, if the check method requires it ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ _LT_PATH_MAGIC ++ fi ++ ;; ++esac ++ ++# Use C for the default configuration in the libtool script ++LT_SUPPORTED_TAG([CC]) ++_LT_LANG_C_CONFIG ++_LT_LANG_DEFAULT_CONFIG ++_LT_CONFIG_COMMANDS ++])# _LT_SETUP ++ ++ ++# _LT_PROG_LTMAIN ++# --------------- ++# Note that this code is called both from `configure', and `config.status' ++# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, ++# `config.status' has no value for ac_aux_dir unless we are using Automake, ++# so we pass a copy along to make sure it has a sensible value anyway. ++m4_defun([_LT_PROG_LTMAIN], ++[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl ++_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ++ltmain="$ac_aux_dir/ltmain.sh" ++])# _LT_PROG_LTMAIN ++ ++ ++## ------------------------------------- ## ++## Accumulate code for creating libtool. ## ++## ------------------------------------- ## ++ ++# So that we can recreate a full libtool script including additional ++# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS ++# in macros and then make a single call at the end using the `libtool' ++# label. ++ ++ ++# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) ++# ---------------------------------------- ++# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. ++m4_define([_LT_CONFIG_LIBTOOL_INIT], ++[m4_ifval([$1], ++ [m4_append([_LT_OUTPUT_LIBTOOL_INIT], ++ [$1 ++])])]) ++ ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_INIT]) ++ ++ ++# _LT_CONFIG_LIBTOOL([COMMANDS]) ++# ------------------------------ ++# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. ++m4_define([_LT_CONFIG_LIBTOOL], ++[m4_ifval([$1], ++ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], ++ [$1 ++])])]) ++ ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) ++ ++ ++# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) ++# ----------------------------------------------------- ++m4_defun([_LT_CONFIG_SAVE_COMMANDS], ++[_LT_CONFIG_LIBTOOL([$1]) ++_LT_CONFIG_LIBTOOL_INIT([$2]) ++]) ++ ++ ++# _LT_FORMAT_COMMENT([COMMENT]) ++# ----------------------------- ++# Add leading comment marks to the start of each line, and a trailing ++# full-stop to the whole comment if one is not present already. ++m4_define([_LT_FORMAT_COMMENT], ++[m4_ifval([$1], [ ++m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], ++ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) ++)]) ++ ++ ++ ++## ------------------------ ## ++## FIXME: Eliminate VARNAME ## ++## ------------------------ ## ++ ++ ++# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) ++# ------------------------------------------------------------------- ++# CONFIGNAME is the name given to the value in the libtool script. ++# VARNAME is the (base) name used in the configure script. ++# VALUE may be 0, 1 or 2 for a computed quote escaped value based on ++# VARNAME. Any other value will be used directly. ++m4_define([_LT_DECL], ++[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], ++ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], ++ [m4_ifval([$1], [$1], [$2])]) ++ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) ++ m4_ifval([$4], ++ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) ++ lt_dict_add_subkey([lt_decl_dict], [$2], ++ [tagged?], [m4_ifval([$5], [yes], [no])])]) ++]) ++ ++ ++# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) ++# -------------------------------------------------------- ++m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) ++ ++ ++# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) ++# ------------------------------------------------ ++m4_define([lt_decl_tag_varnames], ++[_lt_decl_filter([tagged?], [yes], $@)]) ++ ++ ++# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) ++# --------------------------------------------------------- ++m4_define([_lt_decl_filter], ++[m4_case([$#], ++ [0], [m4_fatal([$0: too few arguments: $#])], ++ [1], [m4_fatal([$0: too few arguments: $#: $1])], ++ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], ++ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], ++ [lt_dict_filter([lt_decl_dict], $@)])[]dnl ++]) ++ ++ ++# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) ++# -------------------------------------------------- ++m4_define([lt_decl_quote_varnames], ++[_lt_decl_filter([value], [1], $@)]) ++ ++ ++# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) ++# --------------------------------------------------- ++m4_define([lt_decl_dquote_varnames], ++[_lt_decl_filter([value], [2], $@)]) ++ ++ ++# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) ++# --------------------------------------------------- ++m4_define([lt_decl_varnames_tagged], ++[m4_assert([$# <= 2])dnl ++_$0(m4_quote(m4_default([$1], [[, ]])), ++ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), ++ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) ++m4_define([_lt_decl_varnames_tagged], ++[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) ++ ++ ++# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) ++# ------------------------------------------------ ++m4_define([lt_decl_all_varnames], ++[_$0(m4_quote(m4_default([$1], [[, ]])), ++ m4_if([$2], [], ++ m4_quote(lt_decl_varnames), ++ m4_quote(m4_shift($@))))[]dnl ++]) ++m4_define([_lt_decl_all_varnames], ++[lt_join($@, lt_decl_varnames_tagged([$1], ++ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ++]) ++ ++ ++# _LT_CONFIG_STATUS_DECLARE([VARNAME]) ++# ------------------------------------ ++# Quote a variable value, and forward it to `config.status' so that its ++# declaration there will have the same value as in `configure'. VARNAME ++# must have a single quote delimited value for this to work. ++m4_define([_LT_CONFIG_STATUS_DECLARE], ++[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) ++ ++ ++# _LT_CONFIG_STATUS_DECLARATIONS ++# ------------------------------ ++# We delimit libtool config variables with single quotes, so when ++# we write them to config.status, we have to be sure to quote all ++# embedded single quotes properly. In configure, this macro expands ++# each variable declared with _LT_DECL (and _LT_TAGDECL) into: ++# ++# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' ++m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], ++[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), ++ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) ++ ++ ++# _LT_LIBTOOL_TAGS ++# ---------------- ++# Output comment and list of tags supported by the script ++m4_defun([_LT_LIBTOOL_TAGS], ++[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl ++available_tags="_LT_TAGS"dnl ++]) ++ ++ ++# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) ++# ----------------------------------- ++# Extract the dictionary values for VARNAME (optionally with TAG) and ++# expand to a commented shell variable setting: ++# ++# # Some comment about what VAR is for. ++# visible_name=$lt_internal_name ++m4_define([_LT_LIBTOOL_DECLARE], ++[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], ++ [description])))[]dnl ++m4_pushdef([_libtool_name], ++ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl ++m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), ++ [0], [_libtool_name=[$]$1], ++ [1], [_libtool_name=$lt_[]$1], ++ [2], [_libtool_name=$lt_[]$1], ++ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl ++m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ++]) ++ ++ ++# _LT_LIBTOOL_CONFIG_VARS ++# ----------------------- ++# Produce commented declarations of non-tagged libtool config variables ++# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' ++# script. Tagged libtool config variables (even for the LIBTOOL CONFIG ++# section) are produced by _LT_LIBTOOL_TAG_VARS. ++m4_defun([_LT_LIBTOOL_CONFIG_VARS], ++[m4_foreach([_lt_var], ++ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), ++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) ++ ++ ++# _LT_LIBTOOL_TAG_VARS(TAG) ++# ------------------------- ++m4_define([_LT_LIBTOOL_TAG_VARS], ++[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), ++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) ++ ++ ++# _LT_TAGVAR(VARNAME, [TAGNAME]) ++# ------------------------------ ++m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) ++ ++ ++# _LT_CONFIG_COMMANDS ++# ------------------- ++# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of ++# variables for single and double quote escaping we saved from calls ++# to _LT_DECL, we can put quote escaped variables declarations ++# into `config.status', and then the shell code to quote escape them in ++# for loops in `config.status'. Finally, any additional code accumulated ++# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. ++m4_defun([_LT_CONFIG_COMMANDS], ++[AC_PROVIDE_IFELSE([LT_OUTPUT], ++ dnl If the libtool generation code has been placed in $CONFIG_LT, ++ dnl instead of duplicating it all over again into config.status, ++ dnl then we will have config.status run $CONFIG_LT later, so it ++ dnl needs to know what name is stored there: ++ [AC_CONFIG_COMMANDS([libtool], ++ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], ++ dnl If the libtool generation code is destined for config.status, ++ dnl expand the accumulated commands and init code now: ++ [AC_CONFIG_COMMANDS([libtool], ++ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ++])#_LT_CONFIG_COMMANDS ++ ++ ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], ++[ ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++sed_quote_subst='$sed_quote_subst' ++double_quote_subst='$double_quote_subst' ++delay_variable_subst='$delay_variable_subst' ++_LT_CONFIG_STATUS_DECLARATIONS ++LTCC='$LTCC' ++LTCFLAGS='$LTCFLAGS' ++compiler='$compiler_DEFAULT' ++ ++# Quote evaled strings. ++for var in lt_decl_all_varnames([[ \ ++]], lt_decl_quote_varnames); do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[[\\\\\\\`\\"\\\$]]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Double-quote double-evaled strings. ++for var in lt_decl_all_varnames([[ \ ++]], lt_decl_dquote_varnames); do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[[\\\\\\\`\\"\\\$]]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Fix-up fallback echo if it was mangled by the above quoting rules. ++case \$lt_ECHO in ++*'\\\[$]0 --fallback-echo"')dnl " ++ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` ++ ;; ++esac ++ ++_LT_OUTPUT_LIBTOOL_INIT ++]) ++ ++ ++# LT_OUTPUT ++# --------- ++# This macro allows early generation of the libtool script (before ++# AC_OUTPUT is called), incase it is used in configure for compilation ++# tests. ++AC_DEFUN([LT_OUTPUT], ++[: ${CONFIG_LT=./config.lt} ++AC_MSG_NOTICE([creating $CONFIG_LT]) ++cat >"$CONFIG_LT" <<_LTEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate a libtool stub with the current configuration. ++ ++lt_cl_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AS_SHELL_SANITIZE ++_AS_PREPARE ++ ++exec AS_MESSAGE_FD>&1 ++exec AS_MESSAGE_LOG_FD>>config.log ++{ ++ echo ++ AS_BOX([Running $as_me.]) ++} >&AS_MESSAGE_LOG_FD ++ ++lt_cl_help="\ ++\`$as_me' creates a local libtool stub from the current configuration, ++for use in further configure time tests before the real libtool is ++generated. ++ ++Usage: $[0] [[OPTIONS]] ++ ++ -h, --help print this help, then exit ++ -V, --version print version number, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ ++Report bugs to ." ++ ++lt_cl_version="\ ++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl ++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) ++configured by $[0], generated by m4_PACKAGE_STRING. ++ ++Copyright (C) 2008 Free Software Foundation, Inc. ++This config.lt script is free software; the Free Software Foundation ++gives unlimited permision to copy, distribute and modify it." ++ ++while test $[#] != 0 ++do ++ case $[1] in ++ --version | --v* | -V ) ++ echo "$lt_cl_version"; exit 0 ;; ++ --help | --h* | -h ) ++ echo "$lt_cl_help"; exit 0 ;; ++ --debug | --d* | -d ) ++ debug=: ;; ++ --quiet | --q* | --silent | --s* | -q ) ++ lt_cl_silent=: ;; ++ ++ -*) AC_MSG_ERROR([unrecognized option: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ ++ *) AC_MSG_ERROR([unrecognized argument: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ esac ++ shift ++done ++ ++if $lt_cl_silent; then ++ exec AS_MESSAGE_FD>/dev/null ++fi ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<_LTEOF ++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AC_MSG_NOTICE([creating $ofile]) ++_LT_OUTPUT_LIBTOOL_COMMANDS ++AS_EXIT(0) ++_LTEOF ++chmod +x "$CONFIG_LT" ++ ++# configure is writing to config.log, but config.lt does its own redirection, ++# appending to config.log, which fails on DOS, as config.log is still kept ++# open by configure. Here we exec the FD to /dev/null, effectively closing ++# config.log, so it can be properly (re)opened and appended to by config.lt. ++if test "$no_create" != yes; then ++ lt_cl_success=: ++ test "$silent" = yes && ++ lt_config_lt_args="$lt_config_lt_args --quiet" ++ exec AS_MESSAGE_LOG_FD>/dev/null ++ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false ++ exec AS_MESSAGE_LOG_FD>>config.log ++ $lt_cl_success || AS_EXIT(1) ++fi ++])# LT_OUTPUT ++ ++ ++# _LT_CONFIG(TAG) ++# --------------- ++# If TAG is the built-in tag, create an initial libtool script with a ++# default configuration from the untagged config vars. Otherwise add code ++# to config.status for appending the configuration named by TAG from the ++# matching tagged config vars. ++m4_defun([_LT_CONFIG], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++_LT_CONFIG_SAVE_COMMANDS([ ++ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl ++ m4_if(_LT_TAG, [C], [ ++ # See if we are running on zsh, and set the options which allow our ++ # commands through without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ ++ cfgfile="${ofile}T" ++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 ++ $RM "$cfgfile" ++ ++ cat <<_LT_EOF >> "$cfgfile" ++#! $SHELL ++ ++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++_LT_COPYING ++_LT_LIBTOOL_TAGS ++ ++# ### BEGIN LIBTOOL CONFIG ++_LT_LIBTOOL_CONFIG_VARS ++_LT_LIBTOOL_TAG_VARS ++# ### END LIBTOOL CONFIG ++ ++_LT_EOF ++ ++ case $host_os in ++ aix3*) ++ cat <<\_LT_EOF >> "$cfgfile" ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++fi ++_LT_EOF ++ ;; ++ esac ++ ++ _LT_PROG_LTMAIN ++ ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ _LT_PROG_XSI_SHELLFNS ++ ++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ mv -f "$cfgfile" "$ofile" || ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++], ++[cat <<_LT_EOF >> "$ofile" ++ ++dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded ++dnl in a comment (ie after a #). ++# ### BEGIN LIBTOOL TAG CONFIG: $1 ++_LT_LIBTOOL_TAG_VARS(_LT_TAG) ++# ### END LIBTOOL TAG CONFIG: $1 ++_LT_EOF ++])dnl /m4_if ++], ++[m4_if([$1], [], [ ++ PACKAGE='$PACKAGE' ++ VERSION='$VERSION' ++ TIMESTAMP='$TIMESTAMP' ++ RM='$RM' ++ ofile='$ofile'], []) ++])dnl /_LT_CONFIG_SAVE_COMMANDS ++])# _LT_CONFIG ++ ++ ++# LT_SUPPORTED_TAG(TAG) ++# --------------------- ++# Trace this macro to discover what tags are supported by the libtool ++# --tag option, using: ++# autoconf --trace 'LT_SUPPORTED_TAG:$1' ++AC_DEFUN([LT_SUPPORTED_TAG], []) ++ ++ ++# C support is built-in for now ++m4_define([_LT_LANG_C_enabled], []) ++m4_define([_LT_TAGS], []) ++ ++ ++# LT_LANG(LANG) ++# ------------- ++# Enable libtool support for the given language if not already enabled. ++AC_DEFUN([LT_LANG], ++[AC_BEFORE([$0], [LT_OUTPUT])dnl ++m4_case([$1], ++ [C], [_LT_LANG(C)], ++ [C++], [_LT_LANG(CXX)], ++ [Java], [_LT_LANG(GCJ)], ++ [Fortran 77], [_LT_LANG(F77)], ++ [Fortran], [_LT_LANG(FC)], ++ [Windows Resource], [_LT_LANG(RC)], ++ [m4_ifdef([_LT_LANG_]$1[_CONFIG], ++ [_LT_LANG($1)], ++ [m4_fatal([$0: unsupported language: "$1"])])])dnl ++])# LT_LANG ++ ++ ++# _LT_LANG(LANGNAME) ++# ------------------ ++m4_defun([_LT_LANG], ++[m4_ifdef([_LT_LANG_]$1[_enabled], [], ++ [LT_SUPPORTED_TAG([$1])dnl ++ m4_append([_LT_TAGS], [$1 ])dnl ++ m4_define([_LT_LANG_]$1[_enabled], [])dnl ++ _LT_LANG_$1_CONFIG($1)])dnl ++])# _LT_LANG ++ ++ ++# _LT_LANG_DEFAULT_CONFIG ++# ----------------------- ++m4_defun([_LT_LANG_DEFAULT_CONFIG], ++[AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [LT_LANG(CXX)], ++ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) ++ ++AC_PROVIDE_IFELSE([AC_PROG_F77], ++ [LT_LANG(F77)], ++ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) ++ ++AC_PROVIDE_IFELSE([AC_PROG_FC], ++ [LT_LANG(FC)], ++ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) ++ ++dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal ++dnl pulling things in needlessly. ++AC_PROVIDE_IFELSE([AC_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [AC_PROVIDE_IFELSE([LT_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [m4_ifdef([AC_PROG_GCJ], ++ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) ++ m4_ifdef([A][M_PROG_GCJ], ++ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) ++ m4_ifdef([LT_PROG_GCJ], ++ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) ++ ++AC_PROVIDE_IFELSE([LT_PROG_RC], ++ [LT_LANG(RC)], ++ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ++])# _LT_LANG_DEFAULT_CONFIG ++ ++# Obsolete macros: ++AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) ++AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) ++AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) ++AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_CXX], []) ++dnl AC_DEFUN([AC_LIBTOOL_F77], []) ++dnl AC_DEFUN([AC_LIBTOOL_FC], []) ++dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) ++ ++ ++# _LT_TAG_COMPILER ++# ---------------- ++m4_defun([_LT_TAG_COMPILER], ++[AC_REQUIRE([AC_PROG_CC])dnl ++ ++_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl ++_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl ++_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl ++_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++])# _LT_TAG_COMPILER ++ ++ ++# _LT_COMPILER_BOILERPLATE ++# ------------------------ ++# Check for compiler boilerplate output or warnings with ++# the simple compiler test code. ++m4_defun([_LT_COMPILER_BOILERPLATE], ++[m4_require([_LT_DECL_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$RM conftest* ++])# _LT_COMPILER_BOILERPLATE ++ ++ ++# _LT_LINKER_BOILERPLATE ++# ---------------------- ++# Check for linker boilerplate output or warnings with ++# the simple link test code. ++m4_defun([_LT_LINKER_BOILERPLATE], ++[m4_require([_LT_DECL_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$RM -r conftest* ++])# _LT_LINKER_BOILERPLATE ++ ++# _LT_REQUIRED_DARWIN_CHECKS ++# ------------------------- ++m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ ++ case $host_os in ++ rhapsody* | darwin*) ++ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) ++ AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) ++ AC_CHECK_TOOL([LIPO], [lipo], [:]) ++ AC_CHECK_TOOL([OTOOL], [otool], [:]) ++ AC_CHECK_TOOL([OTOOL64], [otool64], [:]) ++ _LT_DECL([], [DSYMUTIL], [1], ++ [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) ++ _LT_DECL([], [NMEDIT], [1], ++ [Tool to change global to local symbols on Mac OS X]) ++ _LT_DECL([], [LIPO], [1], ++ [Tool to manipulate fat objects and archives on Mac OS X]) ++ _LT_DECL([], [OTOOL], [1], ++ [ldd/readelf like tool for Mach-O binaries on Mac OS X]) ++ _LT_DECL([], [OTOOL64], [1], ++ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) ++ ++ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], ++ [lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ rm -rf libconftest.dylib* ++ echo "int foo(void){return 1;}" > conftest.c ++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err ++ _lt_result=$? ++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then ++ lt_cv_apple_cc_single_mod=yes ++ else ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ fi ++ rm -rf libconftest.dylib* ++ rm -f conftest.* ++ fi]) ++ AC_CACHE_CHECK([for -exported_symbols_list linker flag], ++ [lt_cv_ld_exported_symbols_list], ++ [lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], ++ [lt_cv_ld_exported_symbols_list=yes], ++ [lt_cv_ld_exported_symbols_list=no]) ++ LDFLAGS="$save_LDFLAGS" ++ ]) ++ case $host_os in ++ rhapsody* | darwin1.[[012]]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) # darwin 5.x on ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[[012]]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ esac ++ ;; ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' ++ else ++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil='~$DSYMUTIL $lib || :' ++ else ++ _lt_dsymutil= ++ fi ++ ;; ++ esac ++]) ++ ++ ++# _LT_DARWIN_LINKER_FEATURES ++# -------------------------- ++# Checks for linker and compiler features on darwin ++m4_defun([_LT_DARWIN_LINKER_FEATURES], ++[ ++ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_automatic, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" ++ case $cc_basename in ++ ifort*) _lt_dar_can_shared=yes ;; ++ *) _lt_dar_can_shared=$GCC ;; ++ esac ++ if test "$_lt_dar_can_shared" = "yes"; then ++ output_verbose_link_cmd=echo ++ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ m4_if([$1], [CXX], ++[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then ++ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" ++ fi ++],[]) ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++]) ++ ++# _LT_SYS_MODULE_PATH_AIX ++# ----------------------- ++# Links a minimal program and checks the executable ++# for the system default hardcoded library path. In most cases, ++# this is /usr/lib:/lib, but when the MPI compilers are used ++# the location of the communication and MPI libs are included too. ++# If we don't find anything, use the default library path according ++# to the aix ld manual. ++m4_defun([_LT_SYS_MODULE_PATH_AIX], ++[m4_require([_LT_DECL_SED])dnl ++AC_LINK_IFELSE(AC_LANG_PROGRAM,[ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *$.*$$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi],[]) ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++])# _LT_SYS_MODULE_PATH_AIX ++ ++ ++# _LT_SHELL_INIT(ARG) ++# ------------------- ++m4_define([_LT_SHELL_INIT], ++[ifdef([AC_DIVERSION_NOTICE], ++ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], ++ [AC_DIVERT_PUSH(NOTICE)]) ++$1 ++AC_DIVERT_POP ++])# _LT_SHELL_INIT ++ ++ ++# _LT_PROG_ECHO_BACKSLASH ++# ----------------------- ++# Add some code to the start of the generated configure script which ++# will find an echo command which doesn't interpret backslashes. ++m4_defun([_LT_PROG_ECHO_BACKSLASH], ++[_LT_SHELL_INIT([ ++# Check that we are running under the correct shell. ++SHELL=${CONFIG_SHELL-/bin/sh} ++ ++case X$lt_ECHO in ++X*--fallback-echo) ++ # Remove one level of quotation (which was required for Make). ++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ++ ;; ++esac ++ ++ECHO=${lt_ECHO-echo} ++if test "X[$]1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++elif test "X[$]1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $ECHO works! ++ : ++else ++ # Restart under the correct shell. ++ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} ++fi ++ ++if test "X[$]1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat <<_LT_EOF ++[$]* ++_LT_EOF ++ exit 0 ++fi ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++if test -z "$lt_ECHO"; then ++ if test "X${echo_test_string+set}" != Xset; then ++ # find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if { echo_test_string=`eval $cmd`; } 2>/dev/null && ++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null ++ then ++ break ++ fi ++ done ++ fi ++ ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++ else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. ++ ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$dir/echo" ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ++ if test "X$ECHO" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ ECHO='print -r' ++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} ++ else ++ # Try using printf. ++ ECHO='printf %s\n' ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: ++ ++ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do ++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" ++ done ++ ++ if test "$prev" != 'sed 50q "[$]0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ ECHO=echo ++ fi ++ fi ++ fi ++ fi ++ fi ++fi ++ ++# Copy echo and quote the copy suitably for passing to libtool from ++# the Makefile, instead of quoting the original, which is used later. ++lt_ECHO=$ECHO ++if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ++ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" ++fi ++ ++AC_SUBST(lt_ECHO) ++]) ++_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) ++_LT_DECL([], [ECHO], [1], ++ [An echo program that does not interpret backslashes]) ++])# _LT_PROG_ECHO_BACKSLASH ++ ++ ++# _LT_ENABLE_LOCK ++# --------------- ++m4_defun([_LT_ENABLE_LOCK], ++[AC_ARG_ENABLE([libtool-lock], ++ [AS_HELP_STRING([--disable-libtool-lock], ++ [avoid locking (might break parallel builds)])]) ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++ ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '[#]line __oline__ "configure"' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi ++ fi ++ rm -rf conftest* ++ ;; ++ ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|s390*-*tpf*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*|s390*-*tpf*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++ ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, ++ [AC_LANG_PUSH(C) ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) ++ AC_LANG_POP]) ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++esac ++ ++need_locks="$enable_libtool_lock" ++])# _LT_ENABLE_LOCK ++ ++ ++# _LT_CMD_OLD_ARCHIVE ++# ------------------- ++m4_defun([_LT_CMD_OLD_ARCHIVE], ++[AC_CHECK_TOOL(AR, ar, false) ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++_LT_DECL([], [AR], [1], [The archiver]) ++_LT_DECL([], [AR_FLAGS], [1]) ++ ++AC_CHECK_TOOL(STRIP, strip, :) ++test -z "$STRIP" && STRIP=: ++_LT_DECL([], [STRIP], [1], [A symbol stripping program]) ++ ++AC_CHECK_TOOL(RANLIB, ranlib, :) ++test -z "$RANLIB" && RANLIB=: ++_LT_DECL([], [RANLIB], [1], ++ [Commands used to install an old-style archive]) ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= ++ ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++_LT_DECL([], [old_postinstall_cmds], [2]) ++_LT_DECL([], [old_postuninstall_cmds], [2]) ++_LT_TAGDECL([], [old_archive_cmds], [2], ++ [Commands used to build an old-style archive]) ++])# _LT_CMD_OLD_ARCHIVE ++ ++ ++# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ---------------------------------------------------------------- ++# Check whether the given compiler option works ++AC_DEFUN([_LT_COMPILER_OPTION], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$3" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ fi ++ $RM conftest* ++]) ++ ++if test x"[$]$2" = xyes; then ++ m4_if([$5], , :, [$5]) ++else ++ m4_if([$6], , :, [$6]) ++fi ++])# _LT_COMPILER_OPTION ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) ++ ++ ++# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ---------------------------------------------------- ++# Check whether the given linker option works ++AC_DEFUN([_LT_LINKER_OPTION], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $3" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&AS_MESSAGE_LOG_FD ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ else ++ $2=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++]) ++ ++if test x"[$]$2" = xyes; then ++ m4_if([$4], , :, [$4]) ++else ++ m4_if([$5], , :, [$5]) ++fi ++])# _LT_LINKER_OPTION ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) ++ ++ ++# LT_CMD_MAX_LEN ++#--------------- ++AC_DEFUN([LT_CMD_MAX_LEN], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++# find the maximum length of command line arguments ++AC_MSG_CHECKING([the maximum length of command line arguments]) ++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl ++ i=0 ++ teststring="ABCD" ++ ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; ++ ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ++ ;; ++ ++ cygwin* | mingw* | cegcc*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi ++ ;; ++ esac ++]) ++if test -n $lt_cv_sys_max_cmd_len ; then ++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len) ++else ++ AC_MSG_RESULT(none) ++fi ++max_cmd_len=$lt_cv_sys_max_cmd_len ++_LT_DECL([], [max_cmd_len], [0], ++ [What is the maximum length of a command?]) ++])# LT_CMD_MAX_LEN ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) ++ ++ ++# _LT_HEADER_DLFCN ++# ---------------- ++m4_defun([_LT_HEADER_DLFCN], ++[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ++])# _LT_HEADER_DLFCN ++ ++ ++# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, ++# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) ++# ---------------------------------------------------------------- ++m4_defun([_LT_TRY_DLOPEN_SELF], ++[m4_require([_LT_HEADER_DLFCN])dnl ++if test "$cross_compiling" = yes; then : ++ [$4] ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++[#line __oline__ "configure" ++#include "confdefs.h" ++ ++#if HAVE_DLFCN_H ++#include ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ return status; ++}] ++_LT_EOF ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) $1 ;; ++ x$lt_dlneed_uscore) $2 ;; ++ x$lt_dlunknown|x*) $3 ;; ++ esac ++ else : ++ # compilation failed ++ $3 ++ fi ++fi ++rm -fr conftest* ++])# _LT_TRY_DLOPEN_SELF ++ ++ ++# LT_SYS_DLOPEN_SELF ++# ------------------ ++AC_DEFUN([LT_SYS_DLOPEN_SELF], ++[m4_require([_LT_HEADER_DLFCN])dnl ++if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= ++ ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; ++ ++ mingw* | pw32* | cegcc*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ darwin*) ++ # if libdl is installed we need to link against it ++ AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ]) ++ ;; ++ ++ *) ++ AC_CHECK_FUNC([shl_load], ++ [lt_cv_dlopen="shl_load"], ++ [AC_CHECK_LIB([dld], [shl_load], ++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], ++ [AC_CHECK_FUNC([dlopen], ++ [lt_cv_dlopen="dlopen"], ++ [AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], ++ [AC_CHECK_LIB([svld], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], ++ [AC_CHECK_LIB([dld], [dld_link], ++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ;; ++ esac ++ ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi ++ ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++ ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" ++ ++ AC_CACHE_CHECK([whether a program can dlopen itself], ++ lt_cv_dlopen_self, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, ++ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ++ ]) ++ ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ AC_CACHE_CHECK([whether a statically linked program can dlopen itself], ++ lt_cv_dlopen_self_static, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, ++ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ++ ]) ++ fi ++ ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac ++ ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi ++_LT_DECL([dlopen_support], [enable_dlopen], [0], ++ [Whether dlopen is supported]) ++_LT_DECL([dlopen_self], [enable_dlopen_self], [0], ++ [Whether dlopen of programs is supported]) ++_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], ++ [Whether dlopen of statically linked programs is supported]) ++])# LT_SYS_DLOPEN_SELF ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) ++ ++ ++# _LT_COMPILER_C_O([TAGNAME]) ++# --------------------------- ++# Check to see if options -c and -o are simultaneously supported by compiler. ++# This macro does not hard code the compiler like AC_PROG_CC_C_O. ++m4_defun([_LT_COMPILER_C_O], ++[m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_TAG_COMPILER])dnl ++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], ++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], ++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ fi ++ fi ++ chmod u+w . 2>&AS_MESSAGE_LOG_FD ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* ++]) ++_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], ++ [Does compiler simultaneously support -c and -o options?]) ++])# _LT_COMPILER_C_O ++ ++ ++# _LT_COMPILER_FILE_LOCKS([TAGNAME]) ++# ---------------------------------- ++# Check to see if we can do hard links to lock some files if needed ++m4_defun([_LT_COMPILER_FILE_LOCKS], ++[m4_require([_LT_ENABLE_LOCK])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++_LT_COMPILER_C_O([$1]) ++ ++hard_links="nottested" ++if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ AC_MSG_CHECKING([if we can lock with hard links]) ++ hard_links=yes ++ $RM conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ AC_MSG_RESULT([$hard_links]) ++ if test "$hard_links" = no; then ++ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ++])# _LT_COMPILER_FILE_LOCKS ++ ++ ++# _LT_CHECK_OBJDIR ++# ---------------- ++m4_defun([_LT_CHECK_OBJDIR], ++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], ++[rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs ++else ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs ++fi ++rmdir .libs 2>/dev/null]) ++objdir=$lt_cv_objdir ++_LT_DECL([], [objdir], [0], ++ [The name of the directory that contains temporary libtool files])dnl ++m4_pattern_allow([LT_OBJDIR])dnl ++AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", ++ [Define to the sub-directory in which libtool stores uninstalled libraries.]) ++])# _LT_CHECK_OBJDIR ++ ++ ++# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) ++# -------------------------------------- ++# Check hardcoding attributes. ++m4_defun([_LT_LINKER_HARDCODE_LIBPATH], ++[AC_MSG_CHECKING([how to hardcode library paths into programs]) ++_LT_TAGVAR(hardcode_action, $1)= ++if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || ++ test -n "$_LT_TAGVAR(runpath_var, $1)" || ++ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then ++ ++ # We can hardcode non-existent directories. ++ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && ++ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then ++ # Linking always hardcodes the temporary library directory. ++ _LT_TAGVAR(hardcode_action, $1)=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ _LT_TAGVAR(hardcode_action, $1)=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ _LT_TAGVAR(hardcode_action, $1)=unsupported ++fi ++AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) ++ ++if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || ++ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++_LT_TAGDECL([], [hardcode_action], [0], ++ [How to hardcode a shared library path into an executable]) ++])# _LT_LINKER_HARDCODE_LIBPATH ++ ++ ++# _LT_CMD_STRIPLIB ++# ---------------- ++m4_defun([_LT_CMD_STRIPLIB], ++[m4_require([_LT_DECL_EGREP]) ++striplib= ++old_striplib= ++AC_MSG_CHECKING([whether stripping libraries is possible]) ++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ AC_MSG_RESULT([yes]) ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ fi ++ ;; ++ *) ++ AC_MSG_RESULT([no]) ++ ;; ++ esac ++fi ++_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) ++_LT_DECL([], [striplib], [1]) ++])# _LT_CMD_STRIPLIB ++ ++ ++# _LT_SYS_DYNAMIC_LINKER([TAG]) ++# ----------------------------- ++# PORTME Fill in your ld.so characteristics ++m4_defun([_LT_SYS_DYNAMIC_LINKER], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_OBJDUMP])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_MSG_CHECKING([dynamic linker characteristics]) ++m4_if([$1], ++ [], [ ++if test "$GCC" = yes; then ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ fi ++ done ++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[[lt_foo]]++; } ++ if (lt_freq[[lt_foo]] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi]) ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix[[4-9]]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[[01]] | aix4.[[01]].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ ;; ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/$[[^/]]*$\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ esac ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[[45]]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; ++ ++cygwin* | mingw* | pw32* | cegcc*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw* | cegcc*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; ++ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++m4_if([$1], [],[ ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[[123]]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[[01]]* | freebsdelf3.[[01]]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ ++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix[[3-9]]*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ ++ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], ++ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], ++ [shlibpath_overrides_runpath=yes])]) ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir ++ ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++*nto* | *qnx*) ++ version_type=qnx ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[[89]] | openbsd2.[[89]].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++rdos*) ++ dynamic_linker=no ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++AC_MSG_RESULT([$dynamic_linker]) ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++fi ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++fi ++ ++_LT_DECL([], [variables_saved_for_relink], [1], ++ [Variables whose values should be saved in libtool wrapper scripts and ++ restored at link time]) ++_LT_DECL([], [need_lib_prefix], [0], ++ [Do we need the "lib" prefix for modules?]) ++_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) ++_LT_DECL([], [version_type], [0], [Library versioning type]) ++_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) ++_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) ++_LT_DECL([], [shlibpath_overrides_runpath], [0], ++ [Is shlibpath searched before the hard-coded library search path?]) ++_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) ++_LT_DECL([], [library_names_spec], [1], ++ [[List of archive names. First name is the real one, the rest are links. ++ The last name is the one that the linker finds with -lNAME]]) ++_LT_DECL([], [soname_spec], [1], ++ [[The coded name of the library, if different from the real name]]) ++_LT_DECL([], [postinstall_cmds], [2], ++ [Command to use after installation of a shared archive]) ++_LT_DECL([], [postuninstall_cmds], [2], ++ [Command to use after uninstallation of a shared archive]) ++_LT_DECL([], [finish_cmds], [2], ++ [Commands used to finish a libtool library installation in a directory]) ++_LT_DECL([], [finish_eval], [1], ++ [[As "finish_cmds", except a single script fragment to be evaled but ++ not shown]]) ++_LT_DECL([], [hardcode_into_libs], [0], ++ [Whether we should hardcode library paths into libraries]) ++_LT_DECL([], [sys_lib_search_path_spec], [2], ++ [Compile-time system search path for libraries]) ++_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], ++ [Run-time system search path for libraries]) ++])# _LT_SYS_DYNAMIC_LINKER ++ ++ ++# _LT_PATH_TOOL_PREFIX(TOOL) ++# -------------------------- ++# find a file program which can recognize shared library ++AC_DEFUN([_LT_PATH_TOOL_PREFIX], ++[m4_require([_LT_DECL_EGREP])dnl ++AC_MSG_CHECKING([for $1]) ++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, ++[case $MAGIC_CMD in ++[[\\/*] | ?:[\\/]*]) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++dnl $ac_dummy forces splitting on constant user-supplied paths. ++dnl POSIX.2 word splitting is done only on the output of word expansions, ++dnl not every word. This closes a longstanding sh security hole. ++ ac_dummy="m4_if([$2], , $PATH, [$2])" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$1; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/$1" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac]) ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ AC_MSG_RESULT($MAGIC_CMD) ++else ++ AC_MSG_RESULT(no) ++fi ++_LT_DECL([], [MAGIC_CMD], [0], ++ [Used to examine libraries when file_magic_cmd begins with "file"])dnl ++])# _LT_PATH_TOOL_PREFIX ++ ++# Old name: ++AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) ++ ++ ++# _LT_PATH_MAGIC ++# -------------- ++# find a file program which can recognize a shared library ++m4_defun([_LT_PATH_MAGIC], ++[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) ++ else ++ MAGIC_CMD=: ++ fi ++fi ++])# _LT_PATH_MAGIC ++ ++ ++# LT_PATH_LD ++# ---------- ++# find the pathname to the GNU or non-GNU linker ++AC_DEFUN([LT_PATH_LD], ++[AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl ++ ++AC_ARG_WITH([gnu-ld], ++ [AS_HELP_STRING([--with-gnu-ld], ++ [assume the C compiler uses GNU ld @<:@default=no@:>@])], ++ [test "$withval" = no || with_gnu_ld=yes], ++ [with_gnu_ld=no])dnl ++ ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ AC_MSG_CHECKING([for ld used by $CC]) ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [[\\/]]* | ?:[[\\/]]*) ++ re_direlt='/[[^/]][[^/]]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ AC_MSG_CHECKING([for GNU ld]) ++else ++ AC_MSG_CHECKING([for non-GNU ld]) ++fi ++AC_CACHE_VAL(lt_cv_path_LD, ++[if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ else ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ fi ++ ;; ++ ++cegcc) ++ # use the weaker test based on 'objdump'. See mingw*. ++ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ ;; ++ ++darwin* | rhapsody*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++freebsd* | dragonfly*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ case $host_cpu in ++ i*86 ) ++ # Not sure whether the presence of OpenBSD here was a mistake. ++ # Let's accept both of them until this is cleared up. ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++ ;; ++ esac ++ else ++ lt_cv_deplibs_check_method=pass_all ++ fi ++ ;; ++ ++gnu*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++hpux10.20* | hpux11*) ++ lt_cv_file_magic_cmd=/usr/bin/file ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ ;; ++ hppa*64*) ++ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ++ ;; ++ *) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ ;; ++ esac ++ ;; ++ ++interix[[3-9]]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' ++ fi ++ ;; ++ ++newos6*) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=/usr/lib/libnls.so ++ ;; ++ ++*nto* | *qnx*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ fi ++ ;; ++ ++osf3* | osf4* | osf5*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++rdos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++solaris*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv4 | sysv4.3*) ++ case $host_vendor in ++ motorola) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ ;; ++ ncr) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ sequent) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ++ ;; ++ sni) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" ++ lt_cv_file_magic_test_file=/lib/libc.so ++ ;; ++ siemens) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ esac ++ ;; ++ ++tpf*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++esac ++]) ++file_magic_cmd=$lt_cv_file_magic_cmd ++deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown ++ ++_LT_DECL([], [deplibs_check_method], [1], ++ [Method to check whether dependent libraries are shared objects]) ++_LT_DECL([], [file_magic_cmd], [1], ++ [Command to use when deplibs_check_method == "file_magic"]) ++])# _LT_CHECK_MAGIC_METHOD ++ ++ ++# LT_PATH_NM ++# ---------- ++# find the pathname to a BSD- or MS-compatible name lister ++AC_DEFUN([LT_PATH_NM], ++[AC_REQUIRE([AC_PROG_CC])dnl ++AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, ++[if test -n "$NM"; then ++ # Let the user override the test. ++ lt_cv_path_NM="$NM" ++else ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ done ++ IFS="$lt_save_ifs" ++ done ++ : ${lt_cv_path_NM=no} ++fi]) ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" ++else ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) ++ AC_SUBST([DUMPBIN]) ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" ++ fi ++fi ++test -z "$NM" && NM=nm ++AC_SUBST([NM]) ++_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl ++ ++AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], ++ [lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) ++ cat conftest.out >&AS_MESSAGE_LOG_FD ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" ++ fi ++ rm -f conftest*]) ++])# LT_PATH_NM ++ ++# Old names: ++AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) ++AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_PROG_NM], []) ++dnl AC_DEFUN([AC_PROG_NM], []) ++ ++ ++# LT_LIB_M ++# -------- ++# check for math library ++AC_DEFUN([LT_LIB_M], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++LIBM= ++case $host in ++*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) ++ # These system don't have libm, or don't need it ++ ;; ++*-ncr-sysv4.3*) ++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") ++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ++ ;; ++*) ++ AC_CHECK_LIB(m, cos, LIBM="-lm") ++ ;; ++esac ++AC_SUBST([LIBM]) ++])# LT_LIB_M ++ ++# Old name: ++AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_CHECK_LIBM], []) ++ ++ ++# _LT_COMPILER_NO_RTTI([TAGNAME]) ++# ------------------------------- ++m4_defun([_LT_COMPILER_NO_RTTI], ++[m4_require([_LT_TAG_COMPILER])dnl ++ ++_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++ ++if test "$GCC" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ++ ++ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], ++ lt_cv_prog_compiler_rtti_exceptions, ++ [-fno-rtti -fno-exceptions], [], ++ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) ++fi ++_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], ++ [Compiler flag to turn off builtin functions]) ++])# _LT_COMPILER_NO_RTTI ++ ++ ++# _LT_CMD_GLOBAL_SYMBOLS ++# ---------------------- ++m4_defun([_LT_CMD_GLOBAL_SYMBOLS], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++AC_REQUIRE([LT_PATH_LD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_TAG_COMPILER])dnl ++ ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++AC_MSG_CHECKING([command to parse $NM output from $compiler object]) ++AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], ++[ ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] ++ ++# Character class describing NM global symbol codes. ++symcode='[[BCDEGRST]]' ++ ++# Regexp to match symbols that can be accessed directly from C. ++sympat='$[[_A-Za-z]][[_A-Za-z0-9]]*$' ++ ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[[BCDT]]' ++ ;; ++cygwin* | mingw* | pw32* | cegcc*) ++ symcode='[[ABCDGISTW]]' ++ ;; ++hpux*) ++ if test "$host_cpu" = ia64; then ++ symcode='[[ABCDEGRST]]' ++ fi ++ ;; ++irix* | nonstopux*) ++ symcode='[[BCDEGRST]]' ++ ;; ++osf*) ++ symcode='[[BCDEGQRST]]' ++ ;; ++solaris*) ++ symcode='[[BDRT]]' ++ ;; ++sco3.2v5*) ++ symcode='[[DT]]' ++ ;; ++sysv4.2uw2*) ++ symcode='[[DT]]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[[ABDT]]' ++ ;; ++sysv4) ++ symcode='[[DFNSTU]]' ++ ;; ++esac ++ ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[[ABCDGIRSTW]]' ;; ++esac ++ ++# Transform an extracted symbol line into a proper C declaration. ++# Some systems (esp. on ia64) link data and code symbols differently, ++# so use this general approach. ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'" ++ ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $[[^ ]]*$ $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $[[^ ]]*$ $lib[[^ ]]*$$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $[[^ ]]*$ $[[^ ]]*$$/ {\"lib\2\", (void *) \&\2},/p'" ++ ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++ ;; ++esac ++ ++# Try without a prefix underscore, then with it. ++for ac_symprfx in "" "_"; do ++ ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" ++ ++ # Write the raw and C identifiers. ++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ # Fake it for dumpbin and say T for any non-static function ++ # and D for any global variable. ++ # Also find C++ and __fastcall symbols from MSVC++, ++ # which start with @ or ?. ++ lt_cv_sys_global_symbol_pipe="$AWK ['"\ ++" {last_section=section; section=\$ 3};"\ ++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ ++" \$ 0!~/External *\|/{next};"\ ++" / 0+ UNDEF /{next}; / UNDEF $[^|]$*()/{next};"\ ++" {if(hide[section]) next};"\ ++" {f=0}; \$ 0~/.*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ ++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ ++" s[1]~/^[@?]/{print s[1], s[1]; next};"\ ++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ ++" ' prfx=^$ac_symprfx]" ++ else ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]$$symcode$symcode*$[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" ++ fi ++ ++ # Check to see that the pipe works correctly. ++ pipe_works=no ++ ++ rm -f conftest* ++ cat > conftest.$ac_ext <<_LT_EOF ++#ifdef __cplusplus ++extern "C" { ++#endif ++char nm_test_var; ++void nm_test_func(void); ++void nm_test_func(void){} ++#ifdef __cplusplus ++} ++#endif ++int main(){nm_test_var='a';nm_test_func();return(0);} ++_LT_EOF ++ ++ if AC_TRY_EVAL(ac_compile); then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi ++ ++ # Make sure that we snagged all the symbols we need. ++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then ++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then ++ cat <<_LT_EOF > conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++_LT_EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' ++ ++ cat <<_LT_EOF >> conftest.$ac_ext ++ ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ void *address; ++} ++lt__PROGRAM__LTX_preloaded_symbols[[]] = ++{ ++ { "@PROGRAM@", (void *) 0 }, ++_LT_EOF ++ $SED "s/^$symcode$symcode* $.*$ $.*$$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext ++ cat <<\_LT_EOF >> conftest.$ac_ext ++ {0, (void *) 0} ++}; ++ ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt__PROGRAM__LTX_preloaded_symbols; ++} ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++_LT_EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD ++ cat conftest.$ac_ext >&5 ++ fi ++ rm -rf conftest* conftst* ++ ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= ++ fi ++done ++]) ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ AC_MSG_RESULT(failed) ++else ++ AC_MSG_RESULT(ok) ++fi ++ ++_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], ++ [Take the output of nm and produce a listing of raw symbols and C names]) ++_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], ++ [Transform the output of nm in a proper C declaration]) ++_LT_DECL([global_symbol_to_c_name_address], ++ [lt_cv_sys_global_symbol_to_c_name_address], [1], ++ [Transform the output of nm in a C name address pair]) ++_LT_DECL([global_symbol_to_c_name_address_lib_prefix], ++ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], ++ [Transform the output of nm in a C name address pair when lib prefix is needed]) ++]) # _LT_CMD_GLOBAL_SYMBOLS ++ ++ ++# _LT_COMPILER_PIC([TAGNAME]) ++# --------------------------- ++m4_defun([_LT_COMPILER_PIC], ++[m4_require([_LT_TAG_COMPILER])dnl ++_LT_TAGVAR(lt_prog_compiler_wl, $1)= ++_LT_TAGVAR(lt_prog_compiler_pic, $1)= ++_LT_TAGVAR(lt_prog_compiler_static, $1)= ++ ++AC_MSG_CHECKING([for $compiler option to produce PIC]) ++m4_if([$1], [CXX], [ ++ # C++ specific cases for pic, static, wl, etc. ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac ++ ;; ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ mingw* | cygwin* | os2* | pw32* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ ;; ++ *djgpp*) ++ # DJGPP does not support shared libraries at all ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ interix[[3-9]]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic ++ fi ++ ;; ++ hpux*) ++ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit ++ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag ++ # sets the default TLS model and affects inlining. ++ case $host_cpu in ++ hppa*64*) ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ ;; ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ else ++ case $host_os in ++ aix[[4-9]]*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ else ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ chorus*) ++ case $cc_basename in ++ cxch68*) ++ # Green Hills C++ Compiler ++ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ++ ;; ++ esac ++ ;; ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ freebsd* | dragonfly*) ++ # FreeBSD uses GNU C++ ++ ;; ++ hpux9* | hpux10* | hpux11*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ if test "$host_cpu" != ia64; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ fi ++ ;; ++ aCC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ ;; ++ esac ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? ++ ;; ++ irix5* | irix6* | nonstopux*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ # CC pic flag -KPIC is the default. ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ KCC*) ++ # KAI C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ ecpc* ) ++ # old Intel C++ for x86_64 which still supported -KPIC. ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ icpc* ) ++ # Intel C++, used to be incompatible with GCC. ++ # ICC 10 doesn't accept -KPIC any more. ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ cxx*) ++ # Compaq C++ ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ xlc* | xlC*) ++ # IBM XL 8.0 on PPC ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ lynxos*) ++ ;; ++ m88k*) ++ ;; ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ ;; ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ cxx*) ++ # Digital/Compaq C++ ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ psos*) ++ ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ lcc*) ++ # Lucid ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ esac ++ ;; ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ vxworks*) ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++], ++[ ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac ++ ;; ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ ;; ++ ++ hpux*) ++ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit ++ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag ++ # sets the default TLS model and affects inlining. ++ case $host_cpu in ++ hppa*64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ interix[[3-9]]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ enable_shared=no ++ ;; ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic ++ fi ++ ;; ++ ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ else ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ ++ mingw* | cygwin* | pw32* | os2* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC (with -KPIC) is the default. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ # old Intel for x86_64 which still supported -KPIC. ++ ecc*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ # icc used to be incompatible with GCC. ++ # ICC 10 doesn't accept -KPIC any more. ++ icc* | ifort*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ # Lahey Fortran 8.1. ++ lf95*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ccc*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All Alpha code is PIC. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ xl*) ++ # IBM XL C 8.0/Fortran 10.1 on PPC ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ ++ newsos6) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All OSF/1 code is PIC. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ rdos*) ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ solaris*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ unicos*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ ++ uts4*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ *) ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++]) ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ++ ;; ++esac ++AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) ++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], ++ [How to pass a linker flag through the compiler]) ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then ++ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], ++ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], ++ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], ++ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in ++ "" | " "*) ;; ++ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; ++ esac], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) ++fi ++_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], ++ [Additional compiler flags for building library objects]) ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" ++_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], ++ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), ++ $lt_tmp_static_flag, ++ [], ++ [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) ++_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], ++ [Compiler flag to prevent dynamic linking]) ++])# _LT_COMPILER_PIC ++ ++ ++# _LT_LINKER_SHLIBS([TAGNAME]) ++# ---------------------------- ++# See if the linker supports building shared libraries. ++m4_defun([_LT_LINKER_SHLIBS], ++[AC_REQUIRE([LT_PATH_LD])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++m4_require([_LT_TAG_COMPILER])dnl ++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++m4_if([$1], [CXX], [ ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ case $host_os in ++ aix[[4-9]]*) ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ ;; ++ pw32*) ++ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ++ ;; ++ cygwin* | mingw* | cegcc*) ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__$[[^ ]]*$[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ linux* | k*bsd*-gnu) ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ esac ++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++], [ ++ runpath_var= ++ _LT_TAGVAR(allow_undefined_flag, $1)= ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(archive_cmds, $1)= ++ _LT_TAGVAR(archive_expsym_cmds, $1)= ++ _LT_TAGVAR(compiler_needs_object, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_TAGVAR(hardcode_automatic, $1)=no ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ _LT_TAGVAR(hardcode_minus_L, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_TAGVAR(inherit_rpath, $1)=no ++ _LT_TAGVAR(link_all_deplibs, $1)=unknown ++ _LT_TAGVAR(module_cmds, $1)= ++ _LT_TAGVAR(module_expsym_cmds, $1)= ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)= ++ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= ++ _LT_TAGVAR(thread_safe_flag_spec, $1)= ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ _LT_TAGVAR(include_expsyms, $1)= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++dnl Note also adjust exclude_expsyms for C++ above. ++ extract_expsyms_cmds= ++ ++ case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ linux* | k*bsd*-gnu) ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ ;; ++ esac ++ ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>&1` in ++ *GNU\ gold*) supports_anon_versioning=yes ;; ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix[[3-9]]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++_LT_EOF ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='' ++ ;; ++ m68k) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32* | cegcc*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]$[[^ ]]*$/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ interix[[3-9]]*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) ++ tmp_diet=no ++ if test "$host_os" = linux-dietlibc; then ++ case $cc_basename in ++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) ++ esac ++ fi ++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ ++ && test "$tmp_diet" = no ++ then ++ tmp_addflag= ++ tmp_sharedflag='-shared' ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ lf95*) # Lahey Fortran 8.1 ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ tmp_sharedflag='--shared' ;; ++ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) ++ tmp_sharedflag='-qmkshrobj' ++ tmp_addflag= ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ _LT_TAGVAR(compiler_needs_object, $1)=yes ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ esac ++ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ++ case $cc_basename in ++ xlf*) ++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ esac ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ++ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then ++ runpath_var= ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ fi ++ ;; ++ ++ aix[[4-9]]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ _LT_TAGVAR(archive_cmds, $1)='' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='' ++ ;; ++ m68k) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ ;; ++ ++ bsdi[[45]]*) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32* | cegcc*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' ++ # FIXME: Should let the user specify the lib program. ++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ _LT_DARWIN_LINKER_FEATURES($1) ++ ;; ++ ++ dgux*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ freebsd1*) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ hpux9*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; ++ ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ fi ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ # Try to use the -exported_symbol ld option, if it does not ++ # work, assume that -exports_file does not work either and ++ # implicitly export all symbols. ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ AC_LINK_IFELSE(int foo(void) {}, ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ ) ++ LDFLAGS="$save_LDFLAGS" ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(inherit_rpath, $1)=yes ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ newsos6) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ *nto* | *qnx*) ++ ;; ++ ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ else ++ case $host_os in ++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ os2*) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; ++ ++ osf3*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; ++ ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ else ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ ++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; ++ ++ solaris*) ++ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ else ++ case `$CC -V 2>&1` in ++ *"Compilers 5.0"*) ++ wlarc='' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ++ ;; ++ *) ++ wlarc='${wl}' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ ;; ++ esac ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ fi ++ ;; ++ esac ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; ++ ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ sysv4) ++ case $host_vendor in ++ sni) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ ;; ++ motorola) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ sysv4.3*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ fi ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ uts4*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ *) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ++ if test x$host_vendor = xsni; then ++ case $host in ++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ++ ;; ++ esac ++ fi ++ fi ++]) ++AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) ++test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++ ++_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld ++ ++_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl ++_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl ++_LT_DECL([], [extract_expsyms_cmds], [2], ++ [The commands to extract the exported symbol list from a shared archive]) ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in ++x|xyes) ++ # Assume -lc should be added ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $_LT_TAGVAR(archive_cmds, $1) in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ AC_MSG_CHECKING([whether -lc should be explicitly linked in]) ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) ++ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) ++ _LT_TAGVAR(allow_undefined_flag, $1)= ++ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) ++ then ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ else ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ fi ++ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $RM conftest* ++ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], ++ [Whether or not to add -lc for building shared libraries]) ++_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], ++ [enable_shared_with_static_runtimes], [0], ++ [Whether or not to disallow shared libs when runtime libs are static]) ++_LT_TAGDECL([], [export_dynamic_flag_spec], [1], ++ [Compiler flag to allow reflexive dlopens]) ++_LT_TAGDECL([], [whole_archive_flag_spec], [1], ++ [Compiler flag to generate shared objects directly from archives]) ++_LT_TAGDECL([], [compiler_needs_object], [1], ++ [Whether the compiler copes with passing no objects directly]) ++_LT_TAGDECL([], [old_archive_from_new_cmds], [2], ++ [Create an old-style archive from a shared archive]) ++_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], ++ [Create a temporary old-style archive to link instead of a shared archive]) ++_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) ++_LT_TAGDECL([], [archive_expsym_cmds], [2]) ++_LT_TAGDECL([], [module_cmds], [2], ++ [Commands used to build a loadable module if different from building ++ a shared archive.]) ++_LT_TAGDECL([], [module_expsym_cmds], [2]) ++_LT_TAGDECL([], [with_gnu_ld], [1], ++ [Whether we are building with GNU ld or not]) ++_LT_TAGDECL([], [allow_undefined_flag], [1], ++ [Flag that allows shared libraries with undefined symbols to be built]) ++_LT_TAGDECL([], [no_undefined_flag], [1], ++ [Flag that enforces no undefined symbols]) ++_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], ++ [Flag to hardcode $libdir into a binary during linking. ++ This must work even if $libdir does not exist]) ++_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], ++ [[If ld is used when linking, flag to hardcode $libdir into a binary ++ during linking. This must work even if $libdir does not exist]]) ++_LT_TAGDECL([], [hardcode_libdir_separator], [1], ++ [Whether we need a single "-rpath" flag with a separated argument]) ++_LT_TAGDECL([], [hardcode_direct], [0], ++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes ++ DIR into the resulting binary]) ++_LT_TAGDECL([], [hardcode_direct_absolute], [0], ++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes ++ DIR into the resulting binary and the resulting library dependency is ++ "absolute", i.e impossible to change by setting ${shlibpath_var} if the ++ library is relocated]) ++_LT_TAGDECL([], [hardcode_minus_L], [0], ++ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++ into the resulting binary]) ++_LT_TAGDECL([], [hardcode_shlibpath_var], [0], ++ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++ into the resulting binary]) ++_LT_TAGDECL([], [hardcode_automatic], [0], ++ [Set to "yes" if building a shared library automatically hardcodes DIR ++ into the library and all subsequent libraries and executables linked ++ against it]) ++_LT_TAGDECL([], [inherit_rpath], [0], ++ [Set to yes if linker adds runtime paths of dependent libraries ++ to runtime path list]) ++_LT_TAGDECL([], [link_all_deplibs], [0], ++ [Whether libtool must link a program against all its dependency libraries]) ++_LT_TAGDECL([], [fix_srcfile_path], [1], ++ [Fix the shell variable $srcfile for the compiler]) ++_LT_TAGDECL([], [always_export_symbols], [0], ++ [Set to "yes" if exported symbols are required]) ++_LT_TAGDECL([], [export_symbols_cmds], [2], ++ [The commands to list exported symbols]) ++_LT_TAGDECL([], [exclude_expsyms], [1], ++ [Symbols that should not be listed in the preloaded symbols]) ++_LT_TAGDECL([], [include_expsyms], [1], ++ [Symbols that must always be exported]) ++_LT_TAGDECL([], [prelink_cmds], [2], ++ [Commands necessary for linking programs (against libraries) with templates]) ++_LT_TAGDECL([], [file_list_spec], [1], ++ [Specify filename containing input files]) ++dnl FIXME: Not yet implemented ++dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], ++dnl [Compiler flag to generate thread safe objects]) ++])# _LT_LINKER_SHLIBS ++ ++ ++# _LT_LANG_C_CONFIG([TAG]) ++# ------------------------ ++# Ensure that the configuration variables for a C compiler are suitably ++# defined. These variables are subsequently used by _LT_CONFIG to write ++# the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_C_CONFIG], ++[m4_require([_LT_DECL_EGREP])dnl ++lt_save_CC="$CC" ++AC_LANG_PUSH(C) ++ ++# Source file extension for C test sources. ++ac_ext=c ++ ++# Object file extension for compiled C test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' ++ ++_LT_TAG_COMPILER ++# Save the default compiler, since it gets overwritten when the other ++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. ++compiler_DEFAULT=$CC ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ ++## CAVEAT EMPTOR: ++## There is no encapsulation within the following macros, do not change ++## the running order or otherwise move them around unless you know exactly ++## what you are doing... ++if test -n "$compiler"; then ++ _LT_COMPILER_NO_RTTI($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ LT_SYS_DLOPEN_SELF ++ _LT_CMD_STRIPLIB ++ ++ # Report which library types will actually be built ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) ++ ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) ++ ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) ++ ++ _LT_CONFIG($1) ++fi ++AC_LANG_POP ++CC="$lt_save_CC" ++])# _LT_LANG_C_CONFIG ++ ++ ++# _LT_PROG_CXX ++# ------------ ++# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ ++# compiler, we have our own version here. ++m4_defun([_LT_PROG_CXX], ++[ ++pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) ++AC_PROG_CXX ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ AC_PROG_CXXCPP ++else ++ _lt_caught_CXX_error=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_CXX ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_CXX], []) ++ ++ ++# _LT_LANG_CXX_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for a C++ compiler are suitably ++# defined. These variables are subsequently used by _LT_CONFIG to write ++# the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_CXX_CONFIG], ++[AC_REQUIRE([_LT_PROG_CXX])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_EGREP])dnl ++ ++AC_LANG_PUSH(C++) ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(compiler_needs_object, $1)=no ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ ++# Source file extension for C++ test sources. ++ac_ext=cpp ++ ++# Object file extension for compiled C++ test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# No sense in running all these tests if we already determined that ++# the CXX compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_caught_CXX_error" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="int some_variable = 0;" ++ ++ # Code to be used in simple link tests ++ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' ++ ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER ++ ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC=$CC ++ lt_save_LD=$LD ++ lt_save_GCC=$GCC ++ GCC=$GXX ++ lt_save_with_gnu_ld=$with_gnu_ld ++ lt_save_path_LD=$lt_cv_path_LD ++ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then ++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx ++ else ++ $as_unset lt_cv_prog_gnu_ld ++ fi ++ if test -n "${lt_cv_path_LDCXX+set}"; then ++ lt_cv_path_LD=$lt_cv_path_LDCXX ++ else ++ $as_unset lt_cv_path_LD ++ fi ++ test -z "${LDCXX+set}" || LD=$LDCXX ++ CC=${CXX-"c++"} ++ compiler=$CC ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ ++ if test -n "$compiler"; then ++ # We don't want -fno-exception when compiling C++ code, so set the ++ # no_builtin_flag separately ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ++ else ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++ fi ++ ++ if test "$GXX" = yes; then ++ # Set up default GNU C++ configuration ++ ++ LT_PATH_LD ++ ++ # Check if GNU C++ uses GNU ld as the underlying linker, since the ++ # archiving commands below assume that GNU ld is being used. ++ if test "$with_gnu_ld" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to ++ # investigate it a little bit more. (MM) ++ wlarc='${wl}' ++ ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if eval "`$CC -print-prog-name=ld` --help 2>&1" | ++ $GREP 'no-whole-archive' > /dev/null; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ with_gnu_ld=no ++ wlarc= ++ ++ # A generic and very simple default shared library creation ++ # command for GNU C++ for the case where it uses the native ++ # linker, instead of GNU ld. If possible, this setting should ++ # overridden to take advantage of the native linker features on ++ # the platform it is being used on. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ fi ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ ++ else ++ GXX=no ++ with_gnu_ld=no ++ wlarc= ++ fi ++ ++ # PORTME: fill in a description of your system's C++ link characteristics ++ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ case $host_os in ++ aix3*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) ++ for ld_flag in $LDFLAGS; do ++ case $ld_flag in ++ *-brtl*) ++ aix_use_runtimelinking=yes ++ break ++ ;; ++ esac ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ _LT_TAGVAR(archive_cmds, $1)='' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' ++ ++ if test "$GXX" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to ++ # export. ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an empty ++ # executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared ++ # libraries. ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ chorus*) ++ case $cc_basename in ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ cygwin* | mingw* | pw32* | cegcc*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ darwin* | rhapsody*) ++ _LT_DARWIN_LINKER_FEATURES($1) ++ ;; ++ ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ freebsd[[12]]*) ++ # C++ shared libraries reported to be fairly broken before ++ # switch to ELF ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ freebsd-elf*) ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ ;; ++ ++ freebsd* | dragonfly*) ++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF ++ # conventions ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ ;; ++ ++ gnu*) ++ ;; ++ ++ hpux9*) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ hpux10*|hpux11*) ++ if test $with_gnu_ld = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ ;; ++ *) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; ++ esac ++ fi ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ;; ++ esac ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test $with_gnu_ld = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ fi ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ interix[[3-9]]*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ irix5* | irix6*) ++ case $cc_basename in ++ CC*) ++ # SGI C++ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' ++ fi ++ fi ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; ++ esac ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(inherit_rpath, $1)=yes ++ ;; ++ ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ++ ;; ++ icpc* | ecpc* ) ++ # Intel C++ ++ with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ case `$CC -V` in ++ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) ++ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ ++ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' ++ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ ++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ ++ $RANLIB $oldlib' ++ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ *) # Version 6 will use weak symbols ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ esac ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) ++ # Compaq C++ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' ++ ++ runpath_var=LD_RUN_PATH ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ xl*) ++ # IBM XL 8.0 on PPC, with GNU ld ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ _LT_TAGVAR(compiler_needs_object, $1)=yes ++ ++ # Not sure whether something based on ++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 ++ # would be better. ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ ++ lynxos*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ m88k*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ netbsd*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' ++ wlarc= ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ fi ++ # Workaround some broken pre-1.5 toolchains ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ++ ;; ++ ++ *nto* | *qnx*) ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ ;; ++ ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ fi ++ output_verbose_link_cmd=echo ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$[[^()0-9A-Za-z{}]]$/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Archives containing C++ object files must be created using ++ # the KAI C++ compiler. ++ case $host in ++ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; ++ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; ++ esac ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ cxx*) ++ case $host in ++ osf3*) ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ ;; ++ *) ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ ++ echo "-hidden">> $lib.exp~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ ++ $RM $lib.exp' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ ;; ++ esac ++ ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ case $host in ++ osf3*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ esac ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ psos*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ lcc*) ++ # Lucid ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes ++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ ;; ++ esac ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ ++ # The C++ compiler must be used to create the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ++ ;; ++ *) ++ # GNU C++ compiler with Solaris linker ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' ++ if $CC --version | $GREP -v '^2\.7' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ else ++ # g++ 2.7 appears to require `-G' NOT `-shared' on this ++ # platform. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ fi ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; ++ ++ vxworks*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ++ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) ++ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++ ++ _LT_TAGVAR(GCC, $1)="$GXX" ++ _LT_TAGVAR(LD, $1)="$LD" ++ ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_SYS_HIDDEN_LIBDEPS($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ CC=$lt_save_CC ++ LDCXX=$LD ++ LD=$lt_save_LD ++ GCC=$lt_save_GCC ++ with_gnu_ld=$lt_save_with_gnu_ld ++ lt_cv_path_LDCXX=$lt_cv_path_LD ++ lt_cv_path_LD=$lt_save_path_LD ++ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld ++ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ++fi # test "$_lt_caught_CXX_error" != yes ++ ++AC_LANG_POP ++])# _LT_LANG_CXX_CONFIG ++ ++ ++# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) ++# --------------------------------- ++# Figure out "hidden" library dependencies from verbose ++# compiler output when linking a shared library. ++# Parse the compiler output and extract the necessary ++# objects, libraries and library flags. ++m4_defun([_LT_SYS_HIDDEN_LIBDEPS], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++# Dependencies to place before and after the object being linked: ++_LT_TAGVAR(predep_objects, $1)= ++_LT_TAGVAR(postdep_objects, $1)= ++_LT_TAGVAR(predeps, $1)= ++_LT_TAGVAR(postdeps, $1)= ++_LT_TAGVAR(compiler_lib_search_path, $1)= ++ ++dnl we can't use the lt_simple_compile_test_code here, ++dnl because it contains code intended for an executable, ++dnl not a library. It's possible we should let each ++dnl tag define a new lt_????_link_test_code variable, ++dnl but it's only used here... ++m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF ++int a; ++void foo (void) { a = 0; } ++_LT_EOF ++], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF ++class Foo ++{ ++public: ++ Foo (void) { a = 0; } ++private: ++ int a; ++}; ++_LT_EOF ++], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF ++ subroutine foo ++ implicit none ++ integer*4 a ++ a=0 ++ return ++ end ++_LT_EOF ++], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF ++ subroutine foo ++ implicit none ++ integer a ++ a=0 ++ return ++ end ++_LT_EOF ++], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF ++public class foo { ++ private int a; ++ public void bar (void) { ++ a = 0; ++ } ++}; ++_LT_EOF ++]) ++dnl Parse the compiler output and extract the necessary ++dnl objects, libraries and library flags. ++if AC_TRY_EVAL(ac_compile); then ++ # Parse the compiler output and extract the necessary ++ # objects, libraries and library flags. ++ ++ # Sentinel used to keep track of whether or not we are before ++ # the conftest object file. ++ pre_test_object_deps_done=no ++ ++ for p in `eval "$output_verbose_link_cmd"`; do ++ case $p in ++ ++ -L* | -R* | -l*) ++ # Some compilers place space between "-{L,R}" and the path. ++ # Remove the space. ++ if test $p = "-L" || ++ test $p = "-R"; then ++ prev=$p ++ continue ++ else ++ prev= ++ fi ++ ++ if test "$pre_test_object_deps_done" = no; then ++ case $p in ++ -L* | -R*) ++ # Internal compiler library paths should come after those ++ # provided the user. The postdeps already come after the ++ # user supplied libs so there is no need to process them. ++ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then ++ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" ++ else ++ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" ++ fi ++ ;; ++ # The "-l" case would never come before the object being ++ # linked, so don't bother handling this case. ++ esac ++ else ++ if test -z "$_LT_TAGVAR(postdeps, $1)"; then ++ _LT_TAGVAR(postdeps, $1)="${prev}${p}" ++ else ++ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" ++ fi ++ fi ++ ;; ++ ++ *.$objext) ++ # This assumes that the test object file only shows up ++ # once in the compiler output. ++ if test "$p" = "conftest.$objext"; then ++ pre_test_object_deps_done=yes ++ continue ++ fi ++ ++ if test "$pre_test_object_deps_done" = no; then ++ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then ++ _LT_TAGVAR(predep_objects, $1)="$p" ++ else ++ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" ++ fi ++ else ++ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then ++ _LT_TAGVAR(postdep_objects, $1)="$p" ++ else ++ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" ++ fi ++ fi ++ ;; ++ ++ *) ;; # Ignore the rest. ++ ++ esac ++ done ++ ++ # Clean up. ++ rm -f a.out a.exe ++else ++ echo "libtool.m4: error: problem compiling $1 test program" ++fi ++ ++$RM -f confest.$objext ++ ++# PORTME: override above test on systems where it is broken ++m4_if([$1], [CXX], ++[case $host_os in ++interix[[3-9]]*) ++ # Interix 3.5 installs completely hosed .la files for C++, so rather than ++ # hack all around it, let's just trust "g++" to DTRT. ++ _LT_TAGVAR(predep_objects,$1)= ++ _LT_TAGVAR(postdep_objects,$1)= ++ _LT_TAGVAR(postdeps,$1)= ++ ;; ++ ++linux*) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac ++ ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++ ++solaris*) ++ case $cc_basename in ++ CC*) ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac ++ ++ # Adding this requires a known-good setup of shared libraries for ++ # Sun compiler versions before 5.6, else PIC objects from an old ++ # archive will be linked into the output, leading to subtle bugs. ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++esac ++]) ++ ++case " $_LT_TAGVAR(postdeps, $1) " in ++*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; ++esac ++ _LT_TAGVAR(compiler_lib_search_dirs, $1)= ++if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then ++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` ++fi ++_LT_TAGDECL([], [compiler_lib_search_dirs], [1], ++ [The directories searched by this compiler when creating a shared library]) ++_LT_TAGDECL([], [predep_objects], [1], ++ [Dependencies to place before and after the objects being linked to ++ create a shared library]) ++_LT_TAGDECL([], [postdep_objects], [1]) ++_LT_TAGDECL([], [predeps], [1]) ++_LT_TAGDECL([], [postdeps], [1]) ++_LT_TAGDECL([], [compiler_lib_search_path], [1], ++ [The library search path used internally by the compiler when linking ++ a shared library]) ++])# _LT_SYS_HIDDEN_LIBDEPS ++ ++ ++# _LT_PROG_F77 ++# ------------ ++# Since AC_PROG_F77 is broken, in that it returns the empty string ++# if there is no fortran compiler, we have our own version here. ++m4_defun([_LT_PROG_F77], ++[ ++pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) ++AC_PROG_F77 ++if test -z "$F77" || test "X$F77" = "Xno"; then ++ _lt_disable_F77=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_F77 ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_F77], []) ++ ++ ++# _LT_LANG_F77_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for a Fortran 77 compiler are ++# suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_F77_CONFIG], ++[AC_REQUIRE([_LT_PROG_F77])dnl ++AC_LANG_PUSH(Fortran 77) ++ ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ ++# Source file extension for f77 test sources. ++ac_ext=f ++ ++# Object file extension for compiled f77 test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# No sense in running all these tests if we already determined that ++# the F77 compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_disable_F77" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" ++ ++ # Code to be used in simple link tests ++ lt_simple_link_test_code="\ ++ program t ++ end ++" ++ ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER ++ ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC="$CC" ++ lt_save_GCC=$GCC ++ CC=${F77-"f77"} ++ compiler=$CC ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ GCC=$G77 ++ if test -n "$compiler"; then ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) ++ ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) ++ ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) ++ ++ _LT_TAGVAR(GCC, $1)="$G77" ++ _LT_TAGVAR(LD, $1)="$LD" ++ ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ GCC=$lt_save_GCC ++ CC="$lt_save_CC" ++fi # test "$_lt_disable_F77" != yes ++ ++AC_LANG_POP ++])# _LT_LANG_F77_CONFIG ++ ++ ++# _LT_PROG_FC ++# ----------- ++# Since AC_PROG_FC is broken, in that it returns the empty string ++# if there is no fortran compiler, we have our own version here. ++m4_defun([_LT_PROG_FC], ++[ ++pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) ++AC_PROG_FC ++if test -z "$FC" || test "X$FC" = "Xno"; then ++ _lt_disable_FC=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_FC ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_FC], []) ++ ++ ++# _LT_LANG_FC_CONFIG([TAG]) ++# ------------------------- ++# Ensure that the configuration variables for a Fortran compiler are ++# suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_FC_CONFIG], ++[AC_REQUIRE([_LT_PROG_FC])dnl ++AC_LANG_PUSH(Fortran) ++ ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ ++# Source file extension for fc test sources. ++ac_ext=${ac_fc_srcext-f} ++ ++# Object file extension for compiled fc test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# No sense in running all these tests if we already determined that ++# the FC compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_disable_FC" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" ++ ++ # Code to be used in simple link tests ++ lt_simple_link_test_code="\ ++ program t ++ end ++" ++ ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER ++ ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC="$CC" ++ lt_save_GCC=$GCC ++ CC=${FC-"f95"} ++ compiler=$CC ++ GCC=$ac_cv_fc_compiler_gnu ++ ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ ++ if test -n "$compiler"; then ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) ++ ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) ++ ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) ++ ++ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" ++ _LT_TAGVAR(LD, $1)="$LD" ++ ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_SYS_HIDDEN_LIBDEPS($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ GCC=$lt_save_GCC ++ CC="$lt_save_CC" ++fi # test "$_lt_disable_FC" != yes ++ ++AC_LANG_POP ++])# _LT_LANG_FC_CONFIG ++ ++ ++# _LT_LANG_GCJ_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for the GNU Java Compiler compiler ++# are suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_GCJ_CONFIG], ++[AC_REQUIRE([LT_PROG_GCJ])dnl ++AC_LANG_SAVE ++ ++# Source file extension for Java test sources. ++ac_ext=java ++ ++# Object file extension for compiled Java test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="class foo {}" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++_LT_TAG_COMPILER ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++lt_save_GCC=$GCC ++GCC=yes ++CC=${GCJ-"gcj"} ++compiler=$CC ++_LT_TAGVAR(compiler, $1)=$CC ++_LT_TAGVAR(LD, $1)="$LD" ++_LT_CC_BASENAME([$compiler]) ++ ++# GCJ did not exist at the time GCC didn't implicitly link libc in. ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++ ++## CAVEAT EMPTOR: ++## There is no encapsulation within the following macros, do not change ++## the running order or otherwise move them around unless you know exactly ++## what you are doing... ++if test -n "$compiler"; then ++ _LT_COMPILER_NO_RTTI($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++fi ++ ++AC_LANG_RESTORE ++ ++GCC=$lt_save_GCC ++CC="$lt_save_CC" ++])# _LT_LANG_GCJ_CONFIG ++ ++ ++# _LT_LANG_RC_CONFIG([TAG]) ++# ------------------------- ++# Ensure that the configuration variables for the Windows resource compiler ++# are suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_RC_CONFIG], ++[AC_REQUIRE([LT_PROG_RC])dnl ++AC_LANG_SAVE ++ ++# Source file extension for RC test sources. ++ac_ext=rc ++ ++# Object file extension for compiled RC test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code="$lt_simple_compile_test_code" ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++_LT_TAG_COMPILER ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++lt_save_GCC=$GCC ++GCC= ++CC=${RC-"windres"} ++compiler=$CC ++_LT_TAGVAR(compiler, $1)=$CC ++_LT_CC_BASENAME([$compiler]) ++_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ ++if test -n "$compiler"; then ++ : ++ _LT_CONFIG($1) ++fi ++ ++GCC=$lt_save_GCC ++AC_LANG_RESTORE ++CC="$lt_save_CC" ++])# _LT_LANG_RC_CONFIG ++ ++ ++# LT_PROG_GCJ ++# ----------- ++AC_DEFUN([LT_PROG_GCJ], ++[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], ++ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], ++ [AC_CHECK_TOOL(GCJ, gcj,) ++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" ++ AC_SUBST(GCJFLAGS)])])[]dnl ++]) ++ ++# Old name: ++AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_GCJ], []) ++ ++ ++# LT_PROG_RC ++# ---------- ++AC_DEFUN([LT_PROG_RC], ++[AC_CHECK_TOOL(RC, windres,) ++]) ++ ++# Old name: ++AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_RC], []) ++ ++ ++# _LT_DECL_EGREP ++# -------------- ++# If we don't have a new enough Autoconf to choose the best grep ++# available, choose the one first in the user's PATH. ++m4_defun([_LT_DECL_EGREP], ++[AC_REQUIRE([AC_PROG_EGREP])dnl ++AC_REQUIRE([AC_PROG_FGREP])dnl ++test -z "$GREP" && GREP=grep ++_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) ++_LT_DECL([], [EGREP], [1], [An ERE matcher]) ++_LT_DECL([], [FGREP], [1], [A literal string matcher]) ++dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too ++AC_SUBST([GREP]) ++]) ++ ++ ++# _LT_DECL_OBJDUMP ++# -------------- ++# If we don't have a new enough Autoconf to choose the best objdump ++# available, choose the one first in the user's PATH. ++m4_defun([_LT_DECL_OBJDUMP], ++[AC_CHECK_TOOL(OBJDUMP, objdump, false) ++test -z "$OBJDUMP" && OBJDUMP=objdump ++_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) ++AC_SUBST([OBJDUMP]) ++]) ++ ++ ++# _LT_DECL_SED ++# ------------ ++# Check for a fully-functional sed program, that truncates ++# as few characters as possible. Prefer GNU sed if found. ++m4_defun([_LT_DECL_SED], ++[AC_PROG_SED ++test -z "$SED" && SED=sed ++Xsed="$SED -e 1s/^X//" ++_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) ++_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], ++ [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ++])# _LT_DECL_SED ++ ++m4_ifndef([AC_PROG_SED], [ ++############################################################ ++# NOTE: This macro has been submitted for inclusion into # ++# GNU Autoconf as AC_PROG_SED. When it is available in # ++# a released version of Autoconf we should remove this # ++# macro and use it instead. # ++############################################################ + - info: info-am - - info-am: - - install-data-am: - --install-exec-am: install-binPROGRAMS -+install-dvi: install-dvi-am ++m4_defun([AC_PROG_SED], ++[AC_MSG_CHECKING([for a sed that does not truncate output]) ++AC_CACHE_VAL(lt_cv_path_SED, ++[# Loop through the user's path and test for sed and gsed. ++# Then use that list of sed's as ones to test for truncation. ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for lt_ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then ++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" ++ fi ++ done ++ done ++done ++IFS=$as_save_IFS ++lt_ac_max=0 ++lt_ac_count=0 ++# Add /usr/xpg4/bin/sed as it is typically found on Solaris ++# along with /bin/sed that truncates output. ++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do ++ test ! -f $lt_ac_sed && continue ++ cat /dev/null > conftest.in ++ lt_ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in ++ # Check for GNU sed and select it if it is found. ++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then ++ lt_cv_path_SED=$lt_ac_sed ++ break ++ fi ++ while true; do ++ cat conftest.in conftest.in >conftest.tmp ++ mv conftest.tmp conftest.in ++ cp conftest.in conftest.nl ++ echo >>conftest.nl ++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break ++ cmp -s conftest.out conftest.nl || break ++ # 10000 chars as input seems more than enough ++ test $lt_ac_count -gt 10 && break ++ lt_ac_count=`expr $lt_ac_count + 1` ++ if test $lt_ac_count -gt $lt_ac_max; then ++ lt_ac_max=$lt_ac_count ++ lt_cv_path_SED=$lt_ac_sed ++ fi ++ done ++done ++]) ++SED=$lt_cv_path_SED ++AC_SUBST([SED]) ++AC_MSG_RESULT([$SED]) ++])#AC_PROG_SED ++])#m4_ifndef + -+install-dvi-am: ++# Old name: ++AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_SED], []) + -+install-exec-am: install-sbinPROGRAMS + -+install-html: install-html-am ++# _LT_CHECK_SHELL_FEATURES ++# ------------------------ ++# Find out whether the shell is Bourne or XSI compatible, ++# or has some other useful features. ++m4_defun([_LT_CHECK_SHELL_FEATURES], ++[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) ++# Try some XSI features ++xsi_shell=no ++( _lt_dummy="a/b/c" ++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,, \ ++ && eval 'test $(( 1 + 1 )) -eq 2 \ ++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ ++ && xsi_shell=yes ++AC_MSG_RESULT([$xsi_shell]) ++_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + -+install-html-am: - - install-info: install-info-am - -+install-info-am: ++AC_MSG_CHECKING([whether the shell understands "+="]) ++lt_shell_append=no ++( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ ++ >/dev/null 2>&1 \ ++ && lt_shell_append=yes ++AC_MSG_RESULT([$lt_shell_append]) ++_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + - install-man: - -+install-pdf: install-pdf-am ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ lt_unset=unset ++else ++ lt_unset=false ++fi ++_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + -+install-pdf-am: ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ lt_SP2NL='tr \040 \012' ++ lt_NL2SP='tr \015\012 \040\040' ++ ;; ++ *) # EBCDIC based system ++ lt_SP2NL='tr \100 \n' ++ lt_NL2SP='tr \r\n \100\100' ++ ;; ++esac ++_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl ++_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ++])# _LT_CHECK_SHELL_FEATURES + -+install-ps: install-ps-am + -+install-ps-am: ++# _LT_PROG_XSI_SHELLFNS ++# --------------------- ++# Bourne and XSI compatible variants of some useful shell functions. ++m4_defun([_LT_PROG_XSI_SHELLFNS], ++[case $xsi_shell in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" + - installcheck-am: - - maintainer-clean: maintainer-clean-am -@@ -1152,19 +1212,24 @@ ps: ps-am - - ps-am: - --uninstall-am: uninstall-binPROGRAMS uninstall-info-am -+uninstall-am: uninstall-sbinPROGRAMS ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++} + -+.MAKE: install-am install-strip ++# func_basename file ++func_basename () ++{ ++ func_basename_result="${1##*/}" ++} + -+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ -+ clean-libtool clean-sbinPROGRAMS ctags distclean \ -+ distclean-compile distclean-generic distclean-libtool \ -+ distclean-tags distdir dvi dvi-am html html-am info info-am \ -+ install install-am install-data install-data-am install-dvi \ -+ install-dvi-am install-exec install-exec-am install-html \ -+ install-html-am install-info install-info-am install-man \ -+ install-pdf install-pdf-am install-ps install-ps-am \ -+ install-sbinPROGRAMS install-strip installcheck \ -+ installcheck-am installdirs maintainer-clean \ -+ maintainer-clean-generic mostlyclean mostlyclean-compile \ -+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ -+ tags uninstall uninstall-am uninstall-sbinPROGRAMS - --.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ -- clean-generic clean-libtool ctags distclean distclean-compile \ -- distclean-generic distclean-libtool distclean-tags distdir dvi \ -- dvi-am html html-am info info-am install install-am \ -- install-binPROGRAMS install-data install-data-am install-exec \ -- install-exec-am install-info install-info-am install-man \ -- install-strip installcheck installcheck-am installdirs \ -- maintainer-clean maintainer-clean-generic mostlyclean \ -- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ -- pdf pdf-am ps ps-am tags uninstall uninstall-am \ -- uninstall-binPROGRAMS uninstall-info-am - - # Tell versions [3.59,3.63) of GNU make to not export all variables. - # Otherwise a system limit (for SysV at least) may be exceeded. ---- raidutils-0.0.6.orig/raideng/semaphor.c -+++ raidutils-0.0.6/raideng/semaphor.c -@@ -434,7 +434,7 @@ SEMAPHORE_T osdCreateSemaphore() - rtnVal = privateCreateUnnamedSemaphore(0); - - if (Verbose) -- printf("\nosdCreateSemaphore : Rtn = %x", rtnVal); -+ printf("\nosdCreateSemaphore : Rtn = %lx", (unsigned long)rtnVal); - - return(rtnVal); - } -@@ -475,7 +475,7 @@ SEMAPHORE_T osdCreateNamedSemaphore(char - rtnVal = privateCreateNamedSemaphore(temp, 0); - - if (Verbose) -- printf("\nosdCreateNamedSemaphore : Rtn = %x", rtnVal); -+ printf("\nosdCreateNamedSemaphore : Rtn = %lx", (unsigned long)rtnVal); - - return(rtnVal); - } -@@ -714,7 +714,7 @@ uLONG osdRequestSemaphore(SEMAPHORE_T se - } - - if (Verbose) -- printf("\nosdRequestSemaphore : Rtn = %x\n", rtnVal); -+ printf("\nosdRequestSemaphore : Rtn = %lx\n", rtnVal); - - return(rtnVal); - } -@@ -885,7 +885,7 @@ SEMAPHORE_T osdCreateEventSemaphore() - rtnVal = privateCreateUnnamedSemaphore(1); - - if (Verbose) -- printf("\nosdCreateEventSemaphore : Rtn = %x", rtnVal); -+ printf("\nosdCreateEventSemaphore : Rtn = %lx", (unsigned long)rtnVal); - - return(rtnVal); - } -@@ -923,7 +923,7 @@ SEMAPHORE_T osdCreateNamedEventSemaphore - rtnVal = privateCreateNamedSemaphore(temp, 1); - - if (Verbose) -- printf("\nosdCreateNamedEventSemaphore : Rtn = %x", rtnVal); -+ printf("\nosdCreateNamedEventSemaphore : Rtn = %lx", (unsigned long)rtnVal); - - return(rtnVal); - } ---- raidutils-0.0.6.orig/raideng/osd_unix.cpp -+++ raidutils-0.0.6/raideng/osd_unix.cpp -@@ -164,6 +164,10 @@ typedef struct dpt_scsi_ha HbaInfo; - #define TO_LOGGER_BUFFER_SIZE 0x1000 - #define FROM_LOGGER_BUFFER_SIZE 0x10000 - -+/* Definitions - Device names -----------------------------------------------*/ ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++ func_basename_result="${1##*/}" ++} ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++func_stripname () ++{ ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"} ++} ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=${1%%=*} ++ func_opt_split_arg=${1#*=} ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; ++ esac ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=${1%.*}.lo ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=$(( $[*] )) ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=${#1} ++} ++ ++_LT_EOF ++ ;; ++ *) # Bourne compatible functions. ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++} ++ ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} ++ ++dnl func_dirname_and_basename ++dnl A portable version of this function is already defined in general.m4sh ++dnl so there is no need for it here. ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; ++ esac ++} ++ ++# sed scripts: ++my_sed_long_opt='1s/^$-[[^=]]*$=.*/\1/;q' ++my_sed_long_arg='1s/^-[[^=]]*=//' ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` ++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "$[@]"` ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` ++} ++ ++_LT_EOF ++esac ++ ++case $lt_shell_append in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$[1]+=\$[2]" ++} ++_LT_EOF ++ ;; ++ *) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$[1]=\$$[1]\$[2]" ++} ++ ++_LT_EOF ++ ;; ++ esac ++]) +--- /dev/null ++++ raidutils-0.0.6/m4/ltsugar.m4 +@@ -0,0 +1,123 @@ ++# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- ++# ++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gary V. Vaughan, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# serial 6 ltsugar.m4 ++ ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) ++ ++ ++# lt_join(SEP, ARG1, [ARG2...]) ++# ----------------------------- ++# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their ++# associated separator. ++# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier ++# versions in m4sugar had bugs. ++m4_define([lt_join], ++[m4_if([$#], [1], [], ++ [$#], [2], [[$2]], ++ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) ++m4_define([_lt_join], ++[m4_if([$#$2], [2], [], ++ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) ++ ++ ++# lt_car(LIST) ++# lt_cdr(LIST) ++# ------------ ++# Manipulate m4 lists. ++# These macros are necessary as long as will still need to support ++# Autoconf-2.59 which quotes differently. ++m4_define([lt_car], [[$1]]) ++m4_define([lt_cdr], ++[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], ++ [$#], 1, [], ++ [m4_dquote(m4_shift($@))])]) ++m4_define([lt_unquote], $1) ++ ++ ++# lt_append(MACRO-NAME, STRING, [SEPARATOR]) ++# ------------------------------------------ ++# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. ++# Note that neither SEPARATOR nor STRING are expanded; they are appended ++# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). ++# No SEPARATOR is output if MACRO-NAME was previously undefined (different ++# than defined and empty). ++# ++# This macro is needed until we can rely on Autoconf 2.62, since earlier ++# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. ++m4_define([lt_append], ++[m4_define([$1], ++ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) ++ ++ ++ ++# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) ++# ---------------------------------------------------------- ++# Produce a SEP delimited list of all paired combinations of elements of ++# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list ++# has the form PREFIXmINFIXSUFFIXn. ++# Needed until we can rely on m4_combine added in Autoconf 2.62. ++m4_define([lt_combine], ++[m4_if(m4_eval([$# > 3]), [1], ++ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl ++[[m4_foreach([_Lt_prefix], [$2], ++ [m4_foreach([_Lt_suffix], ++ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, ++ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) ++ ++ ++# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) ++# ----------------------------------------------------------------------- ++# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited ++# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. ++m4_define([lt_if_append_uniq], ++[m4_ifdef([$1], ++ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], ++ [lt_append([$1], [$2], [$3])$4], ++ [$5])], ++ [lt_append([$1], [$2], [$3])$4])]) ++ ++ ++# lt_dict_add(DICT, KEY, VALUE) ++# ----------------------------- ++m4_define([lt_dict_add], ++[m4_define([$1($2)], [$3])]) + -+char *DEV_CTL = "/dev/i2octl"; // formerly /dev/i2o/ctl + - /* Function Prototypes ------------------------------------------------------*/ - - DPT_RTN_T osdIOrequest(uSHORT ioMethod); -@@ -374,35 +378,53 @@ DPT_RTN_T osdIOrequest(uSHORT ioMethod) - - if(ioMethod==DPT_IO_PASS_THRU) - { -- -- /* Try To Open The First Adapter Device */ -- -- for(Index = 0; Index < 20; ++Index) -+ // make sure the device entry represents an active device and -+ // not just a device file that was probed unsuccessfully (so we -+ // don't wait 20 seconds trying to connect to it in the "for" -+ // loop... and so we don't generate a "could not be opened" -+ // error message mentioning the name of this probed-but-not-found -+ // device file, given that we wouldn't expect to be able to -+ // open it anyway). -+ if(DefaultHbaDev->Flags == 0 ) - { -- FileID = open(DefaultHbaDev->NodeName,O_RDONLY); -- if((FileID == -1)&&(errno == ENOENT)) -- { -- sleep(1); -- } -- else { -- break; -- } -+ // this entry was NOT initialized, so print an error message -+ // (and bypass any attempts to open the file; we simply return -+ // MSG_RTN_FAILED to the caller) -+ FormatTimeString(TimeString,time(0)); -+ printf("\nosdIDrequest : %s Fatal error, DefaultHbaDev does not point to an active controller.\n", TimeString); -+ fflush(stdout); - } -+ else { ++# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) ++# -------------------------------------------- ++m4_define([lt_dict_add_subkey], ++[m4_define([$1($2:$3)], [$4])]) + -+ /* Try To Open The First Adapter Device */ + -+ for(Index = 0; Index < 20; ++Index) -+ { -+ FileID = open(DefaultHbaDev->NodeName,O_RDONLY); -+ if((FileID == -1)&&(errno == ENOENT)) -+ { -+ sleep(1); -+ } -+ else { -+ break; -+ } -+ } - - #ifdef _SINIX_ADDON -- if (DemoMode) -- FileID = 99; -+ if (DemoMode) -+ FileID = 99; - #endif -- if(FileID != -1) -- { -- retVal = MSG_RTN_COMPLETED; -- close(FileID); -- } -- else printf("\nosdIOrequest : File %s Could Not Be Opened", -- DefaultHbaDev->NodeName); -+ if(FileID != -1) -+ { -+ retVal = MSG_RTN_COMPLETED; -+ close(FileID); -+ } -+ else printf("\nosdIOrequest : File %s Could Not Be Opened", -+ DefaultHbaDev->NodeName); -+ } - } - if(Verbose) -- printf("\nosdIOrequest : Return = %x",retVal); -+ printf("\nosdIOrequest : Return = %lx",(unsigned long)retVal); - return(retVal); - } - /* osdIOrequest() - end */ -@@ -501,12 +523,21 @@ DPT_RTN_T osdOpenEngine(void) - retVal = MSG_RTN_COMPLETED; - NumHBAs = BuildNodeNameList(); - -+ // If there are no HBAs found, abort with an explict error message. -+ if(NumHBAs == 0) -+ { -+ FormatTimeString(TimeString,time(0)); -+ printf("\nosdOpenEngine : %s Fatal error, no active controller device files found.\n", TimeString); -+ retVal = MSG_RTN_FAILED; -+ fflush(stdout); -+ } ++# lt_dict_fetch(DICT, KEY, [SUBKEY]) ++# ---------------------------------- ++m4_define([lt_dict_fetch], ++[m4_ifval([$3], ++ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), ++ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + - if(Verbose) - { - FormatTimeString(TimeString,time(0)); - -- printf("\nosdOpenEngine : %s Return = %x - %d hbas found", -- TimeString,retVal,NumHBAs); -+ printf("\nosdOpenEngine : %s Return = %lx - %d hbas found", -+ TimeString,(unsigned long)retVal,NumHBAs); - - fflush(stdout); - } -@@ -551,7 +582,7 @@ DPT_RTN_T osdCloseEngine(void) - if(Verbose) - { - FormatTimeString(TimeString,time(0)); -- printf("\nosdCloseEngine : %s Return = %x",TimeString,retVal); -+ printf("\nosdCloseEngine : %s Return = %lx",TimeString,(unsigned long)retVal); - fflush(stdout); - } - return (retVal); -@@ -723,7 +754,7 @@ DPT_RTN_T osdGetDrvrSig(uSHORT ioMethod, - if(Verbose) - { - FormatTimeString(TimeString,time(0)); -- printf("\nosdGetDrvrSig : %s Return = %x",TimeString,retVal); -+ printf("\nosdGetDrvrSig : %s Return = %lx",TimeString,(unsigned long)retVal); - fflush(stdout); - } - -@@ -819,7 +850,7 @@ DPT_RTN_T osdSendCCB(uSHORT ioMethod,dpt - ccb_P->eataCP.nestedFW & 0x0ff, - ccb_P->eataCP.physical & 0x0ff); - printf( -- "\n ScsiAddr = (%.1x,%.1x,%.1x,%.1x), ReqLen = %.2X, DataLen = %.2X", -+ "\n ScsiAddr = (%.1x,%.1x,%.1x,%.1x), ReqLen = %.2X, DataLen = %.2lX", - ccb_P->ctlrNum, - (ccb_P->eataCP.devAddr >> 5) & 0x0ff, - ccb_P->eataCP.devAddr & 0x01f, -@@ -946,7 +977,7 @@ DPT_RTN_T osdSendCCB(uSHORT ioMethod,dpt - if(Verbose) - { - FormatTimeString(TimeString,time(0)); -- printf("\nosdSendCCB : %s Return = %x",TimeString,retVal); -+ printf("\nosdSendCCB : %s Return = %lx",TimeString,(unsigned long)retVal); - fflush(stdout); - } - return (retVal); -@@ -1019,8 +1050,8 @@ DPT_RTN_T osdSendMessage(uLONG HbaNum, P - { - if(!HbaDevs[HbaNum].IoAddress) - { -- printf("\nosdSendMessage : IoAddress is zero for HbaNum=%d\n", -- HbaNum); -+ printf("\nosdSendMessage : IoAddress is zero for HbaNum=%ld\n", -+ (unsigned long)HbaNum); - } - } - -@@ -1232,7 +1263,7 @@ DPT_RTN_T osdSendMessage(uLONG HbaNum, P - #elif defined (_DPT_SCO) || defined (SNI_MIPS) || defined(_DPT_SOLARIS) || defined(_DPT_BSDI) || defined(_DPT_FREE_BSD) || defined(_DPT_LINUX) - - #if defined(_DPT_LINUX_I2O) -- if(strcmp(HbaDevs[HbaNum].NodeName, "/dev/i2o/ctl")) -+ if(strcmp(HbaDevs[HbaNum].NodeName, DEV_CTL)) - i = ioctl(FileID,I2OUSRCMD,IoctlBuffer_P); - else { - struct i2o_cmd_passthru pt; -@@ -1312,7 +1343,7 @@ DPT_RTN_T osdSendMessage(uLONG HbaNum, P - if(Verbose) - { - FormatTimeString(TimeString,time(0)); -- printf("\nosdSendMessage : %s Return = %x",TimeString,retVal); -+ printf("\nosdSendMessage : %s Return = %lx",TimeString,(unsigned long)retVal); - } - return(retVal); - -@@ -1914,7 +1945,7 @@ int _osdStartI2OCp(Controller_t controll - if(Verbose) - { - FormatTimeString(TimeString,time(0)); -- printf("\n_osdStartCp : %s Enter, callback = %x",TimeString,callback); -+ printf("\n_osdStartCp : %s Enter, callback = %lx",TimeString,(unsigned long)callback); - } - - // -@@ -2028,7 +2059,7 @@ DPT_RTN_T osdGetCtlrs(uSHORT ioMethod,uS - if(Verbose) - { - FormatTimeString(TimeString,time(0)); -- printf("\nosdGetCtlrs : %s Enter ",TimeString,retVal); -+ printf("\nosdGetCtlrs : %s Enter, Return = %ld ",TimeString,(unsigned long)retVal); - fflush(stdout); - } ++ ++# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) ++# ----------------------------------------------------------------- ++m4_define([lt_if_dict_fetch], ++[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], ++ [$5], ++ [$6])]) ++ ++ ++# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) ++# -------------------------------------------------------------- ++m4_define([lt_dict_filter], ++[m4_if([$5], [], [], ++ [lt_join(m4_quote(m4_default([$4], [[, ]])), ++ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), ++ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ++]) +--- raidutils-0.0.6.orig/lib/ctlr_map.cpp ++++ raidutils-0.0.6/lib/ctlr_map.cpp +@@ -38,9 +38,12 @@ + * Description: Discover device naming in the OS environment. + * Version Control: + * +-* $Revision: 37 $ ++* $Revision$ + * $NoKeywords: $ +-* $Log: $ ++* $Log$ ++* Revision 1.1.1.1 2004-04-29 10:19:51 bap ++* Imported upstream version 0.0.4. ++* + *****************************************************************************/ -@@ -2144,7 +2175,7 @@ DPT_RTN_T osdGetCtlrs(uSHORT ioMethod,uS - i = 0; - } - #elif defined(_DPT_LINUX_I2O) -- if(strcmp(HbaDevs[Count].NodeName, "/dev/i2o/ctl")) -+ if(strcmp(HbaDevs[Count].NodeName, DEV_CTL)) - i = osdSendIoctl(&HbaDevs[Count],DPT_CTRLINFO,DataBuff,&pkt); - else { - /* -@@ -2289,7 +2320,7 @@ DPT_RTN_T osdGetCtlrs(uSHORT ioMethod,uS - if(Verbose) + /*** INCLUDES ***/ +--- raidutils-0.0.6.orig/lib/engcalls.cpp ++++ raidutils-0.0.6/lib/engcalls.cpp +@@ -292,8 +292,8 @@ DPT_RTN_T DPT_CallAnEngine(long Destinat + { + if(AllocBuffers(ToSize,FromSize) == NULL) + { +- printf("\nShared Memory Allocation Failed, To Size = %x, From Size = %x, Errno = %x", +- ToSize, FromSize, errno); ++ printf("\nShared Memory Allocation Failed, To Size = %lx, From Size = %lx, Errno = %x", ++ (unsigned long)ToSize, (unsigned long)FromSize, errno); + #ifdef _DPT_LOGGER + // + // If this is the logger, release the semaphore +@@ -333,7 +333,7 @@ DPT_RTN_T DPT_CallAnEngine(long Destinat + // + // Send off the message to the engine + // +- if(i = msgsnd(MsgID,(struct msgbuf *)&HdrBuff,MsgDataSize,0) != -1) ++ if((i = (msgsnd(MsgID,(struct msgbuf *)&HdrBuff,MsgDataSize,0) != -1))) { - FormatTimeString(TimeString,time(0)); -- printf("\nosdGetCtlrs : %s Return = %x",TimeString,retVal); -+ printf("\nosdGetCtlrs : %s Return = %lx",TimeString,(unsigned long)retVal); - fflush(stdout); - } - -@@ -2367,7 +2398,7 @@ DPT_RTN_T osdGetSysInfo(sysInfo_S *SysIn - SysInfo_P->busType = SI_PCI_BUS; - SysInfo_P->processorFamily = PROC_INTEL; - buffer_size = sysinfo(SI_ARCHITECTURE, buffer_ptr, 0); -- buffer_ptr = (char *)malloc((int)buffer_size); -+ buffer_ptr = (char *)malloc((size_t)buffer_size); - status = sysinfo(SI_ARCHITECTURE, buffer_ptr, buffer_size); - if (status != -1) - { -@@ -2579,7 +2610,7 @@ DPT_RTN_T osdGetSysInfo(sysInfo_S *SysIn - if(Verbose) - { - FormatTimeString(TimeString,time(0)); -- printf("\nosdGetSysInfo : %s Return = %d",TimeString,retVal); -+ printf("\nosdGetSysInfo : %s Return = %ld",TimeString,(unsigned long)retVal); - fflush(stdout); - } - return (retVal); -@@ -2647,7 +2678,7 @@ int BufferAlloc(uLONG toLoggerSize, char + // + // Set up the alarm if we are timming +@@ -987,7 +987,7 @@ char *AllocBuffers(uLONG toEngSize, uLON /* The Attach Failed, So DeAllocate The Shared Memory */ -- if((int)SharedMemoryPtr == -1) -+ if((long)SharedMemoryPtr == -1) - { - Rtnval = 1; - shmctl(BufferID,IPC_RMID,&shm_buff); -@@ -2782,7 +2813,7 @@ int BufferAlloc(uLONG toLoggerSize, char - toLoggerTotalSize = toLoggerSize + sizeof(dptBuffer_S); - fromLoggerTotalSize = fromEngSize + sizeof(dptBuffer_S); - FromLoggerBuffOffset = toLoggerTotalSize; -- Ptr = (char *)malloc((uINT)(toLoggerTotalSize + fromLoggerTotalSize)); -+ Ptr = (char *)malloc((size_t)(toLoggerTotalSize + fromLoggerTotalSize)); - if(Ptr != NULL) +- if((int)SharedMemoryPtr == -1) ++ if((long)SharedMemoryPtr == -1) { - *toLogger_P_P = Ptr; -@@ -2900,8 +2931,8 @@ DPT_RTN_T osdLoggerCmd( DPT_MSG_T cmd, v - { - FormatTimeString(TimeString,time(0)); - printf( -- "\nosdLoggerCmd : %s Cmd = %x,ioMethod = %x,LoggerID = %x,Hba = %x", -- TimeString,cmd,ioMethod,LoggerID,hbanum); -+ "\nosdLoggerCmd : %s Cmd = %lx,ioMethod = %x,LoggerID = %lx,Hba = %lx", -+ TimeString,(unsigned long)cmd,ioMethod,LoggerID,hbanum); - fflush(stdout); - } - -@@ -3387,7 +3418,7 @@ DPT_RTN_T osdLoggerCmd( DPT_MSG_T cmd, v - if(Verbose) - { - FormatTimeString(TimeString,time(0)); -- printf("\n : %s Return = %x",TimeString,retVal); -+ printf("\n : %s Return = %lx",TimeString,(unsigned long)retVal); - fflush(stdout); - } - return (retVal); -@@ -3421,11 +3452,11 @@ void *osdAllocIO(uLONG size) - { - void *Rtnval; - -- Rtnval = (void *)malloc((uINT)size); -+ Rtnval = (void *)malloc((size_t)size); - if(Verbose) - { - FormatTimeString(TimeString,time(0)); -- printf("\nosdAllocIO : %s Return = %x",TimeString,Rtnval); -+ printf("\nosdAllocIO : %s Return = %lx",TimeString,(unsigned long)Rtnval); - fflush(stdout); - } - -@@ -3459,7 +3490,7 @@ void osdFreeIO(void *buff_P) - if(Verbose) - { - FormatTimeString(TimeString,time(0)); -- printf("\nosdFreeIO : %s Buf = %x",TimeString,buff_P); -+ printf("\nosdFreeIO : %s Buf = %lx",TimeString,(unsigned long)buff_P); - fflush(stdout); - } + shmctl(BufferID,IPC_RMID,&shm_buff); + SharedMemoryPtr = NULL; +@@ -1196,7 +1196,7 @@ void I2oPrintMem(char* Addr,long Count) -@@ -3613,7 +3644,7 @@ DPT_RTN_T osdCheckBLED(uSHORT ctlrNum, - if(Verbose) - { - FormatTimeString(TimeString,time(0)); -- printf("\nosdCheckBLED : %s Return = %d",TimeString,retVal); -+ printf("\nosdCheckBLED : %s Return = %ld",TimeString,(unsigned long)retVal); - fflush(stdout); - } - return (retVal); -@@ -3743,16 +3774,56 @@ uSHORT BuildNodeNameList(void) - NumEntries = 0; + // Print Out The Address In HEX - # if (defined(_DPT_LINUX_I2O)) -+ uCHAR LinuxI2ODataBuff[MAX_I2O_CONTROLLERS]; -+ - memset(&pkt, 0, sizeof(EATA_CP)); - HbaDevs[NumEntries].Flags = 0; -- strcpy(HbaDevs[NumEntries].NodeName, "/dev/i2o/ctl"); -- IoctlRtn = osdSendIoctl(&HbaDevs[NumEntries], I2OGETIOPS, (uCHAR *)&NumEntries, &pkt); -+ strcpy(HbaDevs[NumEntries].NodeName, DEV_CTL); -+ IoctlRtn = osdSendIoctl(&HbaDevs[NumEntries], I2OGETIOPS, LinuxI2ODataBuff, &pkt); - if(!IoctlRtn) { -- for(i = 0; i < NumEntries; i ++) { -- HbaDevs[i].Flags = NODE_FILE_VALID_HBA_B | NODE_FILE_I2O_HBA_B; -- HbaDevs[i].IoAddress = UINTPTR_MAX; -- strcpy(HbaDevs[i].NodeName, "/dev/i2o/ctl"); -- } -+ // step through the returned data buffer and look for the -+ // non-zero entries, which indicate an active IOP. For each -+ // one we find, add a corresponding entry in HbaDevs. -+ for(i = 0; i < MAX_I2O_CONTROLLERS; i ++) { -+ if ( LinuxI2ODataBuff[i] != 0 ) -+ { -+ if(NumEntries >= MAX_HAS) -+ { -+ FormatTimeString(TimeString,time(0)); -+ -+ printf("\nBuildNodeNameList : %s Warning: Found more than %d Linux I2O Controlers; ignoring those that won't fit in the HbaDevs array.", -+ TimeString, MAX_HAS); -+ -+ fflush(stdout); -+ break; -+ } -+ if(Verbose) -+ { -+ FormatTimeString(TimeString,time(0)); -+ -+ printf("\nBuildNodeNameList : %s Found Linux I2O Controler, using %s device file for utility-relative controller number %d.", -+ TimeString, DEV_CTL, NumEntries); -+ -+ fflush(stdout); -+ } -+ -+ HbaDevs[NumEntries].Flags = NODE_FILE_VALID_HBA_B | NODE_FILE_I2O_HBA_B; -+ HbaDevs[NumEntries].IoAddress = UINTPTR_MAX; -+ strcpy(HbaDevs[NumEntries].NodeName, DEV_CTL); -+ -+ ++NumEntries; -+ } -+ else { -+ // for now, we'll assume that all the active IOP entries -+ // are at the front of the returned buffer. In order to -+ // support "gaps", we'd need to record the IOP index in the -+ // NodeFiles_S structure and use that instead of HbaNum when -+ // we call the I2OPASSTHRU ioctl (or make sure that -+ // everything that looks at HbaDevs can handle inactive -+ // entries in the middle of the array). -+ break; -+ } -+ } // for(i = 0; i < MAX_I2O_CONTROLLERS; i ++) - } - # endif +- printf("\n%.4x ",Offset); ++ printf("\n%.4lx ",(unsigned long)Offset); ---- raidutils-0.0.6.orig/raideng/hba.cpp -+++ raidutils-0.0.6/raideng/hba.cpp -@@ -4020,7 +4020,7 @@ dptDevice_C *dev_P = (dptDevice_C *) log - while (dev_P) { - // If an unarrayed physical DASD device with no magic number... - if ((dev_P->getLevel()==2) && (dev_P->getObjType()==DPT_SCSI_DASD) && -- !dev_P->isComponent() && !dev_P->isRemoveable() && -+ !dev_P->isComponent() && !dev_P->isRemovable() && - !dev_P->getMagicNum()) { + // Now Print Out 16 Bytes In HEX Format - // Attempt to set the physical device's magic number ---- raidutils-0.0.6.orig/raideng/driver.cpp -+++ raidutils-0.0.6/raideng/driver.cpp -@@ -465,7 +465,7 @@ DPT_RTN_T dptDriver_C::scanSystem(uSHORT +--- raidutils-0.0.6.orig/lib/engmsg.c ++++ raidutils-0.0.6/lib/engmsg.c +@@ -152,7 +152,7 @@ int MessageDPTEngine(int EngineMsgKey,in + // + // Send off the message to the engine + // +- if(i = msgsnd(msqID,(struct msgbuf *)&HdrBuff,MsgDataSize,0) != -1) ++ if((i = (msgsnd(msqID,(struct msgbuf *)&HdrBuff,MsgDataSize,0) != -1))) + { + // + // Let's set up a little loop here receiving messages in case +--- raidutils-0.0.6.orig/lib/Makefile.in ++++ raidutils-0.0.6/lib/Makefile.in +@@ -1,8 +1,9 @@ +-# Makefile.in generated by automake 1.9.2 from Makefile.am. ++# Makefile.in generated by automake 1.11.1 from Makefile.am. + # @configure_input@ - // Check for valid partition tables - findLSUpartitions(); -- // Attempt to reserve space at the end of every non-removeable -+ // Attempt to reserve space at the end of every non-removable - // disk for use by DPT - myConn_P()->reserveEndOfDisks(); + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004 Free Software Foundation, Inc. ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,17 +15,12 @@ ---- raidutils-0.0.6.orig/raideng/i2omsg.h -+++ raidutils-0.0.6/raideng/i2omsg.h -@@ -1,4 +1,4 @@ --/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2omsg.h 30 4/30/01 12:57p Salyzyn $ */ -+/* $Header$ */ - /**************************************************************** - * Copyright (c) 1996-2000 Distributed Processing Technology Corporation - * Copyright (c) 2000 Adaptec Corporation. ---- raidutils-0.0.6.orig/raideng/eng_unix.cpp -+++ raidutils-0.0.6/raideng/eng_unix.cpp -@@ -188,7 +188,7 @@ extern dpt_sig_S engineSig; + @SET_MAKE@ - /***************************** Main Entry Point *****************************/ +-SOURCES = $(libraidutil_la_SOURCES) +- +-srcdir = @srcdir@ +-top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ +-pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +-top_builddir = .. ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +-INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -47,14 +43,29 @@ am__configure_deps = $(am__aclocal_m4_de + mkinstalldirs = $(install_sh) -d + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; + am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' + am__installdirs = "$(DESTDIR)$(libdir)" +-libLTLIBRARIES_INSTALL = $(INSTALL) + LTLIBRARIES = $(lib_LTLIBRARIES) + libraidutil_la_LIBADD = + am_libraidutil_la_OBJECTS = libraidutil_la-ctlr_map.lo \ +@@ -64,33 +75,34 @@ am_libraidutil_la_OBJECTS = libraidutil_ + libraidutil_la-lockunix.lo libraidutil_la-scsi_log.lo \ + libraidutil_la-dptalign.lo + libraidutil_la_OBJECTS = $(am_libraidutil_la_OBJECTS) +-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) ++DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles ++am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ +- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ +- $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ ++ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +- $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ ++ $(LDFLAGS) -o $@ + CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) +-LTCXXCOMPILE = $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) \ +- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ +- $(AM_CXXFLAGS) $(CXXFLAGS) ++LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ ++ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) + CXXLD = $(CXX) +-CXXLINK = $(LIBTOOL) --mode=link --tag=CXX $(CXXLD) $(AM_CXXFLAGS) \ +- $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ ++ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ ++ $(LDFLAGS) -o $@ + SOURCES = $(libraidutil_la_SOURCES) + DIST_SOURCES = $(libraidutil_la_SOURCES) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ +-AMDEP_FALSE = @AMDEP_FALSE@ +-AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -109,48 +121,57 @@ CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DEFS = @DEFS@ + DEPDIR = @DEPDIR@ +-ECHO = @ECHO@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ ++MKDIR_P = @MKDIR_P@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ ++OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ + PACKAGE_STRING = @PACKAGE_STRING@ + PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ + PACKAGE_VERSION = @PACKAGE_VERSION@ + PATH_SEPARATOR = @PATH_SEPARATOR@ + RANLIB = @RANLIB@ ++SED = @SED@ + SET_MAKE = @SET_MAKE@ + SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ +-ac_ct_AR = @ac_ct_AR@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ +-ac_ct_RANLIB = @ac_ct_RANLIB@ +-ac_ct_STRIP = @ac_ct_STRIP@ +-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -162,28 +183,41 @@ build_alias = @build_alias@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ ++builddir = @builddir@ + datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ + exec_prefix = @exec_prefix@ + host = @host@ + host_alias = @host_alias@ + host_cpu = @host_cpu@ + host_os = @host_os@ + host_vendor = @host_vendor@ ++htmldir = @htmldir@ + includedir = @includedir@ + infodir = @infodir@ + install_sh = @install_sh@ + libdir = @libdir@ + libexecdir = @libexecdir@ ++localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ + prefix = @prefix@ + program_transform_name = @program_transform_name@ ++psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ ++top_build_prefix = @top_build_prefix@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ + lib_LTLIBRARIES = libraidutil.la + libraidutil_la_SOURCES = ctlr_map.cpp dpt_buff.cpp engcalls.cpp engmsg.c findpath.c funcs.c hba_log.cpp lockunix.c scsi_log.cpp dptalign.c + libraidutil_la_CPPFLAGS = -O3 -DMESSAGES -D_DPT_ACTIVE_ALIGNMENT -Dtrue=1 -Dfalse=0 -DHORIZONTAL -DNEW_RSC_MGR -DNEW_RSC_HDR -D_DPT_FLASH -DNEW_LOGGER -DI_WANT_SNI_DEBUG -D__UNIX__ -I../include +@@ -195,14 +229,14 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefi + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +- && exit 0; \ ++ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ ++ && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \ +- cd $(top_srcdir) && \ +- $(AUTOMAKE) --gnu lib/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu lib/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -220,23 +254,28 @@ $(top_srcdir)/configure: $(am__configur + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + $(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(am__aclocal_m4_deps): + install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) +- test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" +- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ ++ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" ++ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ ++ list2=; for p in $$list; do \ + if test -f $$p; then \ +- f=$(am__strip_dir) \ +- echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ +- $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ ++ list2="$$list2 $$p"; \ + else :; fi; \ +- done ++ done; \ ++ test -z "$$list2" || { \ ++ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ ++ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ ++ } --main(int argc, char *argv[]) -+int main(int argc, char *argv[]) - { - int Rtnval; - int Done; -@@ -265,7 +265,7 @@ main(int argc, char *argv[]) - else if (i == ERR_CONN_LIST_ALLOC) - printf("Alloc Connection List "); - else -- printf(" With Unknown Error %x", i); -+ printf(" With Unknown Error %lx", (unsigned long)i); - printf("Failed\n"); - } + uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) +- @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ +- p=$(am__strip_dir) \ +- echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ +- $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ ++ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ ++ for p in $$list; do \ ++ $(am__strip_dir) \ ++ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ ++ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done -@@ -410,7 +410,7 @@ main(int argc, char *argv[]) - // At the top of the loop, we will pull off and process all turnaround messages on the queue since - // they don't have to be sent down to the engine - // -- while(Rtnval = msgrcv(MsqID,(struct msgbuf *)&HdrBuff, MsgDataSize, DPT_TurnAroundKey,IPC_NOWAIT) != -1) -+ while((Rtnval = (msgrcv(MsqID,(struct msgbuf *)&HdrBuff, MsgDataSize, DPT_TurnAroundKey,IPC_NOWAIT) != -1))) - { - Done = ProcessTurnAroundMessage(&HdrBuff); - } -@@ -447,8 +447,8 @@ main(int argc, char *argv[]) - // Done is not set, so wait for a message to come in - // - else { -- while(Rtnval = msgrcv(MsqID,(struct msgbuf *)&HdrBuff, -- MsgDataSize, -DPT_EngineKey,0) == -1) -+ while((Rtnval = (msgrcv(MsqID,(struct msgbuf *)&HdrBuff, -+ MsgDataSize, -DPT_EngineKey,0) == -1))) - { + clean-libLTLIBRARIES: +@@ -248,7 +287,7 @@ clean-libLTLIBRARIES: + rm -f "$${dir}/so_locations"; \ + done + libraidutil.la: $(libraidutil_la_OBJECTS) $(libraidutil_la_DEPENDENCIES) +- $(CXXLINK) -rpath $(libdir) $(libraidutil_la_LDFLAGS) $(libraidutil_la_OBJECTS) $(libraidutil_la_LIBADD) $(LIBS) ++ $(CXXLINK) -rpath $(libdir) $(libraidutil_la_OBJECTS) $(libraidutil_la_LIBADD) $(LIBS) - /* If The Message Failed, And The Reason Was Not An Interrupt, Exit */ -@@ -470,7 +470,7 @@ main(int argc, char *argv[]) - { - if(Verbose) - { -- printf("\n : Message received for PID %d : no process found, discarding", -+ printf("\n : Message received for PID %ld : no process found, discarding", - HdrBuff.callerID); - } - continue; -@@ -491,7 +491,7 @@ main(int argc, char *argv[]) + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -268,116 +307,116 @@ distclean-compile: + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libraidutil_la-scsi_log.Plo@am__quote@ - /* Make Sure That We Could Attach */ + .c.o: +-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< -- if((int)toEng_P != -1) -+ if((long)toEng_P != -1) - { - fromEng_P = toEng_P + HdrBuff.FromEngBuffOffset; + .c.obj: +-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` -@@ -501,11 +501,13 @@ main(int argc, char *argv[]) - FormatTimeString(TimeString,time(0)); - printf("\nEngine Calls : %s DPT_CallEngine",TimeString); - printf( -- "\n EngTag = %x, Event = %x, Target = %x", -- HdrBuff.engineTag,HdrBuff.engEvent,HdrBuff.targetTag); -+ "\n EngTag = %lx, Event = %lx, Target = %lx", -+ (unsigned long)HdrBuff.engineTag, -+ (unsigned long)HdrBuff.engEvent, -+ (unsigned long)HdrBuff.targetTag); - printf( -- "\n Offset = %x fromEng_P = %x toEng_P = %x", -- HdrBuff.FromEngBuffOffset, fromEng_P, toEng_P); -+ "\n Offset = %lx fromEng_P = %lx toEng_P = %lx", -+ HdrBuff.FromEngBuffOffset, (unsigned long)fromEng_P, (unsigned long)toEng_P); - /*#else - "\n EngTag = %x, Event = %x, Target = %x", - HdrBuff.engineTag,HdrBuff.engEvent,HdrBuff.targetTag); -@@ -534,7 +536,7 @@ main(int argc, char *argv[]) - { - if(Verbose) - { -- printf("\n : Returning message for PID %d : no process found, discarding", -+ printf("\n : Returning message for PID %ld : no process found, discarding", - HdrBuff.callerID); - } - continue; -@@ -687,7 +689,7 @@ int ProcessTurnAroundMessage(MsgHdr *Hdr - else { - if(Verbose) - { -- printf("\n : Returning message for PID %d : no process found, discarding", -+ printf("\n : Returning message for PID %ld : no process found, discarding", - HdrBuff_P->callerID); - } - } ---- raidutils-0.0.6.orig/raideng/object.cpp -+++ raidutils-0.0.6/raideng/object.cpp -@@ -121,9 +121,9 @@ memcpy(descr.productID,inq_P->getProduct - memcpy(descr.revision,inq_P->getRevision(),4); - memcpy(descr.vendorExtra,inq_P->getVendorExtra(),20); - descr.terminate(); -- // Check for removeable media -+ // Check for removable media - if (inq_P->getDevType() & DEVTYPE_RMB) -- setRemoveable(); -+ setRemovable(); + .c.lo: +-@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< - // look for SAF-TE in the vendor extra field or the product ID - if (memcmp(inq_P->getVendorExtra()+8, "SAF-TE", 6) == 0) ---- raidutils-0.0.6.orig/raideng/device.cpp -+++ raidutils-0.0.6/raideng/device.cpp -@@ -1415,8 +1415,8 @@ DPT_RTN_T dptDevice_C::readReserve + libraidutil_la-engmsg.lo: engmsg.c +-@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-engmsg.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-engmsg.Tpo" -c -o libraidutil_la-engmsg.lo `test -f 'engmsg.c' || echo '$(srcdir)/'`engmsg.c; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-engmsg.Tpo" "$(DEPDIR)/libraidutil_la-engmsg.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-engmsg.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-engmsg.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-engmsg.Tpo -c -o libraidutil_la-engmsg.lo `test -f 'engmsg.c' || echo '$(srcdir)/'`engmsg.c ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-engmsg.Tpo $(DEPDIR)/libraidutil_la-engmsg.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='engmsg.c' object='libraidutil_la-engmsg.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-engmsg.lo `test -f 'engmsg.c' || echo '$(srcdir)/'`engmsg.c ++@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-engmsg.lo `test -f 'engmsg.c' || echo '$(srcdir)/'`engmsg.c - DPT_RTN_T retVal = MSG_RTN_IGNORED; + libraidutil_la-findpath.lo: findpath.c +-@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-findpath.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-findpath.Tpo" -c -o libraidutil_la-findpath.lo `test -f 'findpath.c' || echo '$(srcdir)/'`findpath.c; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-findpath.Tpo" "$(DEPDIR)/libraidutil_la-findpath.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-findpath.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-findpath.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-findpath.Tpo -c -o libraidutil_la-findpath.lo `test -f 'findpath.c' || echo '$(srcdir)/'`findpath.c ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-findpath.Tpo $(DEPDIR)/libraidutil_la-findpath.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='findpath.c' object='libraidutil_la-findpath.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-findpath.lo `test -f 'findpath.c' || echo '$(srcdir)/'`findpath.c ++@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-findpath.lo `test -f 'findpath.c' || echo '$(srcdir)/'`findpath.c -- // If this is a non-removeable FW physical DASD device... --if ((getObjType()==DPT_SCSI_DASD) && (getLevel()==2) && !isRemoveable() && -+ // If this is a non-removable FW physical DASD device... -+if ((getObjType()==DPT_SCSI_DASD) && (getLevel()==2) && !isRemovable() && - (capacity.maxPhysLBA>0)) { - // Initialize the CCB to perform a read operation - ccb_P->read(capacity.maxPhysLBA,1,512,ptrToLong(ccb_P->dataBuff_P)); -@@ -2462,8 +2462,8 @@ if ((status.display==DSPLY_STAT_OPTIMAL) - if (isPhysical()) { - // Perform a test unit ready cmd - checkIfReady(); -- // If removeable media or no capacity info -- if (isReady() && (isRemoveable() || (capacity.maxLBA == 0))) { -+ // If removable media or no capacity info -+ if (isReady() && (isRemovable() || (capacity.maxLBA == 0))) { - // Try to get the media capacity - getCapacity(); - // If valid capacity info... -@@ -2472,8 +2472,8 @@ if (isPhysical()) { - initReserveBlockInfo(); - } + libraidutil_la-funcs.lo: funcs.c +-@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-funcs.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-funcs.Tpo" -c -o libraidutil_la-funcs.lo `test -f 'funcs.c' || echo '$(srcdir)/'`funcs.c; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-funcs.Tpo" "$(DEPDIR)/libraidutil_la-funcs.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-funcs.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-funcs.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-funcs.Tpo -c -o libraidutil_la-funcs.lo `test -f 'funcs.c' || echo '$(srcdir)/'`funcs.c ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-funcs.Tpo $(DEPDIR)/libraidutil_la-funcs.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='funcs.c' object='libraidutil_la-funcs.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-funcs.lo `test -f 'funcs.c' || echo '$(srcdir)/'`funcs.c ++@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-funcs.lo `test -f 'funcs.c' || echo '$(srcdir)/'`funcs.c -- // if the device is not ready and it is not formatting (and not removeable) -- if (!isReady() && !(status.main == PMAIN_STAT_FORMAT) && !isRemoveable()) { -+ // if the device is not ready and it is not formatting (and not removable) -+ if (!isReady() && !(status.main == PMAIN_STAT_FORMAT) && !isRemovable()) { - status.display = DSPLY_STAT_MISSING; - DEBUG(1, "Device " << PRT_ADDR << "set to missing" ); - } -@@ -4338,7 +4338,7 @@ return (retVal); - // - //Description: - // --// This function reserves space at the end of a non-removeable DASD -+// This function reserves space at the end of a non-removable DASD - //device for use by DPT. This space is currently used for a reserve block, - //a RAID table, and downloaded FW code. - // -@@ -4375,7 +4375,7 @@ return(retVal); - // - //Description: - // --// This function reserves space at the end of a non-removeable DASD -+// This function reserves space at the end of a non-removable DASD - //device for use by DPT. This space is currently used for a reserve block, - //a RAID table, and downloaded FW code. - // -@@ -4402,8 +4402,8 @@ DPT_RTN_T dptDevice_C::reserveEndO + libraidutil_la-lockunix.lo: lockunix.c +-@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-lockunix.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-lockunix.Tpo" -c -o libraidutil_la-lockunix.lo `test -f 'lockunix.c' || echo '$(srcdir)/'`lockunix.c; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-lockunix.Tpo" "$(DEPDIR)/libraidutil_la-lockunix.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-lockunix.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-lockunix.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-lockunix.Tpo -c -o libraidutil_la-lockunix.lo `test -f 'lockunix.c' || echo '$(srcdir)/'`lockunix.c ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-lockunix.Tpo $(DEPDIR)/libraidutil_la-lockunix.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lockunix.c' object='libraidutil_la-lockunix.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-lockunix.lo `test -f 'lockunix.c' || echo '$(srcdir)/'`lockunix.c ++@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-lockunix.lo `test -f 'lockunix.c' || echo '$(srcdir)/'`lockunix.c - DPT_RTN_T retVal; + libraidutil_la-dptalign.lo: dptalign.c +-@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-dptalign.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-dptalign.Tpo" -c -o libraidutil_la-dptalign.lo `test -f 'dptalign.c' || echo '$(srcdir)/'`dptalign.c; \ +-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-dptalign.Tpo" "$(DEPDIR)/libraidutil_la-dptalign.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-dptalign.Tpo"; exit 1; fi ++@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libraidutil_la-dptalign.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-dptalign.Tpo -c -o libraidutil_la-dptalign.lo `test -f 'dptalign.c' || echo '$(srcdir)/'`dptalign.c ++@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-dptalign.Tpo $(DEPDIR)/libraidutil_la-dptalign.Plo + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='dptalign.c' object='libraidutil_la-dptalign.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-dptalign.lo `test -f 'dptalign.c' || echo '$(srcdir)/'`dptalign.c ++@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libraidutil_la-dptalign.lo `test -f 'dptalign.c' || echo '$(srcdir)/'`dptalign.c -- if (isRemoveable()) -- retVal = MSG_RTN_FAILED | ERR_RSV_REMOVEABLE; -+ if (isRemovable()) -+ retVal = MSG_RTN_FAILED | ERR_RSV_REMOVABLE; - else if (getObjType()!=DPT_SCSI_DASD) - retVal = MSG_RTN_FAILED | ERR_RSV_NOT_DASD; - else if (numBlocks==0) ---- raidutils-0.0.6.orig/raideng/device.hpp -+++ raidutils-0.0.6/raideng/device.hpp -@@ -144,8 +144,8 @@ const uSHORT FLG_ENG_EMULATED = 0x0001; - // 1=The device is emulated drive 1 (D:) - // 0=The device is emulated drive 0 (C:) - const uSHORT FLG_ENG_EMU_01 = 0x0002; -- // 1=The device has removeable media --const uSHORT FLG_ENG_REMOVEABLE = 0x0004; -+ // 1=The device has removable media -+const uSHORT FLG_ENG_REMOVABLE = 0x0004; - // 1=The DPT name has not been saved to hardware - const uSHORT FLG_ENG_NEW_NAME = 0x0008; - // 1=A valid partition table was found on this device -@@ -222,9 +222,9 @@ protected: - // Return object information in the specified output buffer - virtual DPT_RTN_T rtnInfo(dptBuffer_S *); + .cpp.o: +-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< -- // Set removeable media flag -- virtual void setRemoveable() { -- scsiFlags |= FLG_ENG_REMOVEABLE; -+ // Set removable media flag -+ virtual void setRemovable() { -+ scsiFlags |= FLG_ENG_REMOVABLE; - } + .cpp.obj: +-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - // Set SAF-TE flag -@@ -282,9 +282,9 @@ public: + .cpp.lo: +-@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< - // Boolean Functions.................................. + libraidutil_la-ctlr_map.lo: ctlr_map.cpp +-@am__fastdepCXX_TRUE@ if $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-ctlr_map.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-ctlr_map.Tpo" -c -o libraidutil_la-ctlr_map.lo `test -f 'ctlr_map.cpp' || echo '$(srcdir)/'`ctlr_map.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-ctlr_map.Tpo" "$(DEPDIR)/libraidutil_la-ctlr_map.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-ctlr_map.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-ctlr_map.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-ctlr_map.Tpo -c -o libraidutil_la-ctlr_map.lo `test -f 'ctlr_map.cpp' || echo '$(srcdir)/'`ctlr_map.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-ctlr_map.Tpo $(DEPDIR)/libraidutil_la-ctlr_map.Plo + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='ctlr_map.cpp' object='libraidutil_la-ctlr_map.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCXX_FALSE@ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-ctlr_map.lo `test -f 'ctlr_map.cpp' || echo '$(srcdir)/'`ctlr_map.cpp ++@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-ctlr_map.lo `test -f 'ctlr_map.cpp' || echo '$(srcdir)/'`ctlr_map.cpp -- // Determines if the device has removeable media -- uSHORT isRemoveable() { -- return (scsiFlags & FLG_ENG_REMOVEABLE); -+ // Determines if the device has removable media -+ uSHORT isRemovable() { -+ return (scsiFlags & FLG_ENG_REMOVABLE); - } - // Determines if the device is an emulated drive - uSHORT isEmulated() { ---- raidutils-0.0.6.orig/raideng/i2odep.h -+++ raidutils-0.0.6/raideng/i2odep.h -@@ -203,7 +203,7 @@ typedef unsigned char BOOL; - # define _F_set12bit4(w,x,y,z,u) ((w)->z = (u)) - # define _F_get16bit(w,x,y,z) ((U16)((w)->z)) - # define _F_set16bit(w,x,y,z,u) ((w)->z = (u)) --#elif (defined(_DPT_BIG_ENDIAN)) -+#elif (defined(_DPT_BIG_ENDIAN) || defined(sparc)) - /* First 12 bits */ - # define _F_getTID(w,x,y) getL12bit(w,x,0) - # define _F_setTID(w,x,y,z) setL12bit(w,x,0,z) ---- raidutils-0.0.6.orig/raideng/raid_dev.cpp -+++ raidutils-0.0.6/raideng/raid_dev.cpp -@@ -317,13 +317,13 @@ DPT_RTN_T dptRAIDdev_C::okPermission(rai - comp_P = comp1_P = (dptRAIDdev_C *) compList.reset(); + libraidutil_la-dpt_buff.lo: dpt_buff.cpp +-@am__fastdepCXX_TRUE@ if $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-dpt_buff.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-dpt_buff.Tpo" -c -o libraidutil_la-dpt_buff.lo `test -f 'dpt_buff.cpp' || echo '$(srcdir)/'`dpt_buff.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-dpt_buff.Tpo" "$(DEPDIR)/libraidutil_la-dpt_buff.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-dpt_buff.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-dpt_buff.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-dpt_buff.Tpo -c -o libraidutil_la-dpt_buff.lo `test -f 'dpt_buff.cpp' || echo '$(srcdir)/'`dpt_buff.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-dpt_buff.Tpo $(DEPDIR)/libraidutil_la-dpt_buff.Plo + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='dpt_buff.cpp' object='libraidutil_la-dpt_buff.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCXX_FALSE@ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-dpt_buff.lo `test -f 'dpt_buff.cpp' || echo '$(srcdir)/'`dpt_buff.cpp ++@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-dpt_buff.lo `test -f 'dpt_buff.cpp' || echo '$(srcdir)/'`dpt_buff.cpp - while ((comp_P!=NULL) && (retVal==MSG_RTN_COMPLETED)) { -- if (!(def_P->permit & FLG_COMP_REMOVEABLE)) -- if (comp_P->isRemoveable()) -- // Removeable media devices not permitted -+ if (!(def_P->permit & FLG_COMP_REMOVABLE)) -+ if (comp_P->isRemovable()) -+ // Removable media devices not permitted - retVal = MSG_RTN_FAILED | ERR_RAID_COMP_REMOVE; - if (!(def_P->permit & FLG_COMP_EMULATED)) - if (comp_P->isEmulated()) -- // Removeable media devices not permitted -+ // Removable media devices not permitted - retVal = MSG_RTN_FAILED | ERR_RAID_COMP_EMULATED; - if (!(def_P->permit & FLG_COMP_ANY_TYPE)) - if (comp_P->getObjType()!=def_P->devType) ---- raidutils-0.0.6.orig/raideng/unreslvd.cpp -+++ raidutils-0.0.6/raideng/unreslvd.cpp -@@ -34,7 +34,7 @@ extern "C" - char *__nw__FUi(int size) - { - char *p; -- p = (char *)malloc(size); -+ p = (char *)malloc((size_t)size); - return(p); - } + libraidutil_la-engcalls.lo: engcalls.cpp +-@am__fastdepCXX_TRUE@ if $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-engcalls.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-engcalls.Tpo" -c -o libraidutil_la-engcalls.lo `test -f 'engcalls.cpp' || echo '$(srcdir)/'`engcalls.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-engcalls.Tpo" "$(DEPDIR)/libraidutil_la-engcalls.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-engcalls.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-engcalls.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-engcalls.Tpo -c -o libraidutil_la-engcalls.lo `test -f 'engcalls.cpp' || echo '$(srcdir)/'`engcalls.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-engcalls.Tpo $(DEPDIR)/libraidutil_la-engcalls.Plo + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='engcalls.cpp' object='libraidutil_la-engcalls.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCXX_FALSE@ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-engcalls.lo `test -f 'engcalls.cpp' || echo '$(srcdir)/'`engcalls.cpp ++@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-engcalls.lo `test -f 'engcalls.cpp' || echo '$(srcdir)/'`engcalls.cpp ---- raidutils-0.0.6.orig/raideng/connect.hpp -+++ raidutils-0.0.6/raideng/connect.hpp -@@ -189,7 +189,7 @@ public: + libraidutil_la-hba_log.lo: hba_log.cpp +-@am__fastdepCXX_TRUE@ if $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-hba_log.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-hba_log.Tpo" -c -o libraidutil_la-hba_log.lo `test -f 'hba_log.cpp' || echo '$(srcdir)/'`hba_log.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-hba_log.Tpo" "$(DEPDIR)/libraidutil_la-hba_log.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-hba_log.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-hba_log.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-hba_log.Tpo -c -o libraidutil_la-hba_log.lo `test -f 'hba_log.cpp' || echo '$(srcdir)/'`hba_log.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-hba_log.Tpo $(DEPDIR)/libraidutil_la-hba_log.Plo + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='hba_log.cpp' object='libraidutil_la-hba_log.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCXX_FALSE@ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-hba_log.lo `test -f 'hba_log.cpp' || echo '$(srcdir)/'`hba_log.cpp ++@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-hba_log.lo `test -f 'hba_log.cpp' || echo '$(srcdir)/'`hba_log.cpp - // Constructor/Destructor............................. + libraidutil_la-scsi_log.lo: scsi_log.cpp +-@am__fastdepCXX_TRUE@ if $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-scsi_log.lo -MD -MP -MF "$(DEPDIR)/libraidutil_la-scsi_log.Tpo" -c -o libraidutil_la-scsi_log.lo `test -f 'scsi_log.cpp' || echo '$(srcdir)/'`scsi_log.cpp; \ +-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libraidutil_la-scsi_log.Tpo" "$(DEPDIR)/libraidutil_la-scsi_log.Plo"; else rm -f "$(DEPDIR)/libraidutil_la-scsi_log.Tpo"; exit 1; fi ++@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libraidutil_la-scsi_log.lo -MD -MP -MF $(DEPDIR)/libraidutil_la-scsi_log.Tpo -c -o libraidutil_la-scsi_log.lo `test -f 'scsi_log.cpp' || echo '$(srcdir)/'`scsi_log.cpp ++@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libraidutil_la-scsi_log.Tpo $(DEPDIR)/libraidutil_la-scsi_log.Plo + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='scsi_log.cpp' object='libraidutil_la-scsi_log.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCXX_FALSE@ $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-scsi_log.lo `test -f 'scsi_log.cpp' || echo '$(srcdir)/'`scsi_log.cpp ++@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libraidutil_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libraidutil_la-scsi_log.lo `test -f 'scsi_log.cpp' || echo '$(srcdir)/'`scsi_log.cpp -- dptSCSIcon_C::dptSCSIcon_C(); -+ dptSCSIcon_C(); + mostlyclean-libtool: + -rm -f *.lo +@@ -385,82 +424,85 @@ mostlyclean-libtool: + clean-libtool: + -rm -rf .libs _libs - // Message Handlers................................... +-distclean-libtool: +- -rm -f libtool +-uninstall-info-am: +- + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique + tags: TAGS -@@ -302,7 +302,7 @@ public: - uLONG genMagicNum(); - // Get a CCB to perform I/O - engCCB_C * acquireCCB(); -- // Reserve space at the end of all non-removeable DASD devices -+ // Reserve space at the end of all non-removable DASD devices - void reserveEndOfDisks(); - // Destroy block zero of all devices marked for partition table - // zapping ---- raidutils-0.0.6.orig/raideng/connect.cpp -+++ raidutils-0.0.6/raideng/connect.cpp -@@ -176,7 +176,7 @@ return (ccb_P); - //Description: - // - // This function attempts to reserve space at the end of all non- --//removeable DASD devices. This space is used by DPT to store -+//removable DASD devices. This space is used by DPT to store - //configuration information, downloaded FW code... - // - //Parameters: -@@ -203,9 +203,9 @@ dptObject_C *obj_P = (dptObject_C *) obj - while (obj_P!=NULL) { - if (obj_P->isDevice()) { - dev_P = (dptDevice_C *) obj_P; -- // If a non-removeable HBA physical DASD device... -+ // If a non-removable HBA physical DASD device... - if ((dev_P->getLevel()==2) && (dev_P->getObjType()==DPT_SCSI_DASD) && -- !dev_P->isComponent() && !dev_P->isRemoveable()) { -+ !dev_P->isComponent() && !dev_P->isRemovable()) { + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ ++ set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ shift; \ ++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$tags $$unique; \ ++ if test $$# -gt 0; then \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ "$$@" $$unique; \ ++ else \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$unique; \ ++ fi; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- tags=; \ +- here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) ' { files[$$0] = 1; } \ +- END { for (i in files) print i; }'`; \ +- test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$tags $$unique ++ $$unique - // Determine how much space is currently reserved - spaceReserved = dev_P->getMaxPhyLBA() - dev_P->getLastLBA(); ---- raidutils-0.0.6.orig/raideng/i2omstor.h -+++ raidutils-0.0.6/raideng/i2omstor.h -@@ -243,7 +243,7 @@ PRAGMA_PACK_PUSH - #define I2O_BSA_DEV_CAP_MULTI_PATH 0x00000002 - #define I2O_BSA_DEV_CAP_DYNAMIC_CAPACITY 0x00000004 - #define I2O_BSA_DEV_CAP_REMOVABLE_MEDIA 0x00000008 --#define I2O_BSA_DEV_CAP_REMOVEABLE_DEVICE 0x00000010 -+#define I2O_BSA_DEV_CAP_REMOVABLE_DEVICE 0x00000010 - #define I2O_BSA_DEV_CAP_READ_ONLY 0x00000020 - #define I2O_BSA_DEV_CAP_LOCKOUT 0x00000040 - #define I2O_BSA_DEV_CAP_BOOT_BYPASS 0x00000080 -@@ -754,13 +754,13 @@ typedef U16 I2O_BSA_VERIFY_FLAGS; - #define I2O_BSA_ERROR_CORRECTION 0x0040 + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && cd $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) $$here ++ && $(am__cd) $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) "$$here" + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags --/* I2O BSA Removeable Media Identifier values */ -+/* I2O BSA Removable Media Identifier values */ + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ +- list='$(DISTFILES)'; for file in $$list; do \ +- case $$file in \ +- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ +- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ +- esac; \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ ++ list='$(DISTFILES)'; \ ++ dist_files=`for file in $$list; do echo $$file; done | \ ++ sed -e "s|^$$srcdirstrip/||;t" \ ++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ ++ case $$dist_files in \ ++ */*) $(MKDIR_P) `echo "$$dist_files" | \ ++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ ++ sort -u` ;; \ ++ esac; \ ++ for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ +- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test "$$dir" != "$$file" && test "$$dir" != "."; then \ +- dir="/$$dir"; \ +- $(mkdir_p) "$(distdir)$$dir"; \ +- else \ +- dir=''; \ +- fi; \ + if test -d $$d/$$file; then \ ++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test -d "$(distdir)/$$file"; then \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ ++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ +- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ ++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ +- test -f $(distdir)/$$file \ +- || cp -p $$d/$$file $(distdir)/$$file \ ++ test -f "$(distdir)/$$file" \ ++ || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +@@ -469,7 +511,7 @@ check: check-am + all-am: Makefile $(LTLIBRARIES) + installdirs: + for dir in "$(DESTDIR)$(libdir)"; do \ +- test -z "$$dir" || $(mkdir_p) "$$dir"; \ ++ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -491,6 +533,7 @@ clean-generic: - typedef U32 I2O_BSA_MEDIA_ID; - #define I2O_BSA_MEDIA_ID_CURRENT_MOUNTED 0xFFFFFFFF + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) ++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -504,7 +547,7 @@ distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-libtool distclean-tags ++ distclean-tags --/* I2O BSA Removeable Media Load Flags */ -+/* I2O BSA Removable Media Load Flags */ + dvi: dvi-am - typedef U8 I2O_BSA_LOAD_FLAGS; - #define I2O_BSA_LOAD_FLAG_MEDIA_LOCK 0x80 -@@ -869,7 +869,7 @@ typedef struct _I2O_BSA_DEVICE_RESET_MES +@@ -512,18 +555,38 @@ dvi-am: - /****************************************************************************/ + html: html-am --/* I2O BSA Media Eject for Removeable Media Message Frame */ -+/* I2O BSA Media Eject for Removable Media Message Frame */ ++html-am: ++ + info: info-am - typedef struct _I2O_BSA_MEDIA_EJECT_MESSAGE { - I2O_MESSAGE_FRAME StdMessageFrame; -@@ -891,7 +891,7 @@ typedef struct _I2O_BSA_MEDIA_LOCK_MESSA + info-am: - /****************************************************************************/ + install-data-am: --/* I2O BSA Media Mount for Removeable Media Message Frame */ -+/* I2O BSA Media Mount for Removable Media Message Frame */ ++install-dvi: install-dvi-am ++ ++install-dvi-am: ++ + install-exec-am: install-libLTLIBRARIES - typedef struct _I2O_BSA_MEDIA_MOUNT_MESSAGE { - I2O_MESSAGE_FRAME StdMessageFrame; ---- raidutils-0.0.6.orig/raideng/scsi_dev.cpp -+++ raidutils-0.0.6/raideng/scsi_dev.cpp -@@ -124,9 +124,9 @@ if (flg & FLG_DEV_EMULATED) - if (flg & FLG_DEV_EMU_01) - scsiFlags |= FLG_ENG_EMU_01; ++install-html: install-html-am ++ ++install-html-am: ++ + install-info: install-info-am -- // If removeable... --if (flg & FLG_DEV_REMOVEABLE) -- scsiFlags |= FLG_ENG_REMOVEABLE; -+ // If removable... -+if (flg & FLG_DEV_REMOVABLE) -+ scsiFlags |= FLG_ENG_REMOVABLE; ++install-info-am: ++ + install-man: - // If a valid partition table exists... - if (flg & FLG_DEV_PTABLE) -@@ -281,8 +281,8 @@ if (isEmulated()) - flg |= FLG_DEV_EMULATED; - if (scsiFlags & FLG_ENG_EMU_01) - flg |= FLG_DEV_EMU_01; --if (isRemoveable()) -- flg |= FLG_DEV_REMOVEABLE; -+if (isRemovable()) -+ flg |= FLG_DEV_REMOVABLE; - if (isLogical()) - flg |= FLG_DEV_LOGICAL; - if (scsiFlags & FLG_ENG_PTABLE) ---- raidutils-0.0.6.orig/raideng/i2otypes.h -+++ raidutils-0.0.6/raideng/i2otypes.h -@@ -1,4 +1,4 @@ --/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2otypes.h 13 4/30/01 12:57p Salyzyn $ */ -+/* $Header$ */ - /**************************************************************** - * Copyright (c) 1996-2000 Distributed Processing Technology Corporation - * Copyright (c) 2000 Adaptec Corporation. ---- raidutils-0.0.6.orig/raideng/raid.h -+++ raidutils-0.0.6/raideng/raid.h -@@ -210,8 +210,8 @@ struct raidParent_S : public raidRange_S - #define FLG_REQ_SUPPRESS 0x8000 ++install-pdf: install-pdf-am ++ ++install-pdf-am: ++ ++install-ps: install-ps-am ++ ++install-ps-am: ++ + installcheck-am: - //permit - bit definitions -- // 1=Components can have removeable media --#define FLG_COMP_REMOVEABLE 0x0001 -+ // 1=Components can have removable media -+#define FLG_COMP_REMOVABLE 0x0001 - // 1=Components can be emulated drives - #define FLG_COMP_EMULATED 0x0002 - // 1=Components must be from the same vendor -@@ -271,7 +271,7 @@ struct raidDef_S : public raidDefinition + maintainer-clean: maintainer-clean-am +@@ -544,20 +607,24 @@ ps: ps-am - // Constructor/Destructor............................. + ps-am: -- raidDef_S::raidDef_S(); -+ raidDef_S(); +-uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES ++uninstall-am: uninstall-libLTLIBRARIES ++ ++.MAKE: install-am install-strip - }; - #endif // c++ ---- raidutils-0.0.6.orig/raideng/i2oexec.h -+++ raidutils-0.0.6/raideng/i2oexec.h -@@ -1,4 +1,4 @@ --/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2oexec.h 17 4/30/01 12:57p Salyzyn $ */ -+/* $Header$ */ - /**************************************************************** - * Copyright (c) 1996-2000 Distributed Processing Technology Corporation - * Copyright (c) 2000 Adaptec Corporation. ---- raidutils-0.0.6.orig/raideng/i2obscsi.h -+++ raidutils-0.0.6/raideng/i2obscsi.h -@@ -1,4 +1,4 @@ --/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2obscsi.h 14 4/30/01 12:57p Salyzyn $ */ -+/* $Header$ */ - /**************************************************************** - * Copyright (c) 1996-2000 Distributed Processing Technology Corporation - * Copyright (c) 2000 Adaptec Corporation. ---- raidutils-0.0.6.orig/raideng/object.hpp -+++ raidutils-0.0.6/raideng/object.hpp -@@ -249,8 +249,8 @@ protected: + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libLTLIBRARIES clean-libtool ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ +- install install-am install-data install-data-am install-exec \ +- install-exec-am install-info install-info-am \ +- install-libLTLIBRARIES install-man install-strip installcheck \ ++ install install-am install-data install-data-am install-dvi \ ++ install-dvi-am install-exec install-exec-am install-html \ ++ install-html-am install-info install-info-am \ ++ install-libLTLIBRARIES install-man install-pdf install-pdf-am \ ++ install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- tags uninstall uninstall-am uninstall-info-am \ +- uninstall-libLTLIBRARIES ++ tags uninstall uninstall-am uninstall-libLTLIBRARIES ++ - // Return object information in the specified output buffer - virtual DPT_RTN_T rtnInfo(dptBuffer_S *); -- // Set removeable media flag -- virtual void setRemoveable() {} -+ // Set removable media flag -+ virtual void setRemovable() {} + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +--- raidutils-0.0.6.orig/lib/lockunix.c ++++ raidutils-0.0.6/lib/lockunix.c +@@ -82,7 +82,7 @@ MkLock (char * name) + return (-1); + } + sprintf (templateBuffer, Template, Name); +- if ((fd = open(mktemp (templateBuffer), O_WRONLY|O_CREAT|O_EXCL)) < 0) { ++ if ((fd = open(mktemp (templateBuffer), O_WRONLY|O_CREAT|O_EXCL, 0644)) < 0) { + free (templateBuffer); + free (lock); + return (-1); +@@ -152,7 +152,7 @@ ChLock (char * name, int pid) - // Set SAFTE flag - virtual void setSAFTE() {}; ---- raidutils-0.0.6.orig/raideng/Makefile.am -+++ raidutils-0.0.6/raideng/Makefile.am -@@ -1,4 +1,4 @@ --bin_PROGRAMS=raideng -+sbin_PROGRAMS=raideng - raideng_SOURCES=addr_rng.cpp array.cpp connect.cpp core.cpp core_ccb.cpp core_con.cpp core_dev.cpp core_mgr.cpp core_obj.cpp debug.cpp device.cpp dptcbuff.c driver.cpp eata2i2o.c eng_sig.c eng_std.cpp eng_unix.cpp engine.cpp englists.cpp gbl_fns.cpp hba.cpp manager.cpp msg_str.cpp object.cpp osd_unix.cpp ptrarray.cpp raid.cpp raid_bcd.cpp raid_dev.cpp raid_hba.cpp raid_mgr.cpp raiddrvr.cpp scsi_bcd.cpp scsi_ccb.cpp scsi_con.cpp scsi_dev.cpp scsi_hba.cpp scsi_mgr.cpp scsi_obj.cpp scsidrvr.cpp semaphor.c stat_log.cpp swap_em.c threads.cpp unreslvd.cpp - raideng_CPPFLAGS=-D__UNIX__ -DMESSAGES -D_DPT_ACTIVE_ALIGNMENT -DI_WANT_SNI_DEBUG -DNEW_LOGGER -I../include - raideng_LDADD=../lib/libraidutil.la ---- raidutils-0.0.6.orig/raideng/i2oadptr.h -+++ raidutils-0.0.6/raideng/i2oadptr.h -@@ -1,4 +1,4 @@ --/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2oadptr.h 10 4/30/01 12:57p Salyzyn $ */ -+/* $Header$ */ - /**************************************************************** - * Copyright (c) 1996-2000 Distributed Processing Technology Corporation - * Copyright (c) 2000 Adaptec Corproation. ---- raidutils-0.0.6.orig/raideng/i2outil.h -+++ raidutils-0.0.6/raideng/i2outil.h -@@ -1,4 +1,4 @@ --/* $Header: /SW/DRIVERS/FreeBSD/I2O.4.X/i2outil.h 12 4/30/01 12:57p Salyzyn $ */ -+/* $Header$ */ - /**************************************************************** - * Copyright (c) 1996-2000 Distributed Processing Technology Corporation - * Copyright (c) 2000 Adaptec Corporation. ---- raidutils-0.0.6.orig/raideng/gbl_fns.cpp -+++ raidutils-0.0.6/raideng/gbl_fns.cpp -@@ -504,7 +504,7 @@ while ((b_P[i]>=32) && (b_P[i]<=126)) { - // - //Description: - // --// This function searches the specified list for a non-removeable -+// This function searches the specified list for a non-removable - //DASD device. - // - //Parameters: -@@ -528,9 +528,9 @@ dptObject_C *obj_P = (dptObject_C *) lis - while ((obj_P!=NULL) && !found) { - if (obj_P->isManager()) - found = findDASD(((dptManager_C *)obj_P)->logList); -- // If a non-removeable DASD device is present... -+ // If a non-removable DASD device is present... - else if ((((dptDevice_C *)obj_P)->getObjType()==DPT_SCSI_DASD) && -- !((dptDevice_C *)obj_P)->isRemoveable() ) -+ !((dptDevice_C *)obj_P)->isRemovable() ) - found = 1; - obj_P = (dptObject_C *) list.next(); - } // end while (obj_P!=NULL) + if (lock != (char *)NULL) { + sprintf (lock, Lock, Name); +- if ((fd = open(lock, O_WRONLY|O_CREAT|O_TRUNC)) >= 0) { ++ if ((fd = open(lock, O_WRONLY|O_CREAT|O_TRUNC, 0644)) >= 0) { + sprintf (buffer, "%d\n", pid); + write (fd, buffer, strlen(buffer)); + close (fd); diff -Nru raidutils-0.0.6/debian/rules raidutils-0.0.6/debian/rules --- raidutils-0.0.6/debian/rules 2011-10-04 22:57:19.000000000 +0000 +++ raidutils-0.0.6/debian/rules 2012-11-12 08:37:34.000000000 +0000 @@ -1,11 +1,7 @@ #!/usr/bin/make -f -dh_targets=binary binary-arch binary-indep build build-arch build-indep clean install - -$(dh_targets) %: - dh $@ --parallel --with autotools_dev - -.PHONY: $(dh_targets) +%: + dh $@ --parallel --with autoreconf WARNFLAGS = -Wall -Wno-write-strings -Wno-comments