diff -Nru sbsigntool-0.6/aclocal.m4 sbsigntool-0.9.2/aclocal.m4 --- sbsigntool-0.6/aclocal.m4 2012-10-12 00:16:35.000000000 +0000 +++ sbsigntool-0.9.2/aclocal.m4 2019-01-21 19:56:20.000000000 +0000 @@ -1,8 +1,7 @@ -# generated automatically by aclocal 1.11.6 -*- Autoconf -*- +# generated automatically by aclocal 1.16.1 -*- Autoconf -*- + +# Copyright (C) 1996-2018 Free Software Foundation, Inc. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, -# Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -12,40 +11,72 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, [m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically `autoreconf'.])]) - -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# serial 1 (pkg-config-0.24) -# -# Copyright © 2004 Scott James Remnant . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) -# PKG_PROG_PKG_CONFIG([MIN-VERSION]) -# ---------------------------------- +dnl pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +dnl serial 11 (pkg-config-0.29) +dnl +dnl Copyright © 2004 Scott James Remnant . +dnl Copyright © 2012-2015 Dan Nicholson +dnl +dnl This program is free software; you can redistribute it and/or modify +dnl it under the terms of the GNU General Public License as published by +dnl the Free Software Foundation; either version 2 of the License, or +dnl (at your option) any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but +dnl WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl General Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License +dnl along with this program; if not, write to the Free Software +dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +dnl 02111-1307, USA. +dnl +dnl As a special exception to the GNU General Public License, if you +dnl distribute this file as part of a program that contains a +dnl configuration script generated by Autoconf, you may include it under +dnl the same distribution terms that you use for the rest of that +dnl program. + +dnl PKG_PREREQ(MIN-VERSION) +dnl ----------------------- +dnl Since: 0.29 +dnl +dnl Verify that the version of the pkg-config macros are at least +dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's +dnl installed version of pkg-config, this checks the developer's version +dnl of pkg.m4 when generating configure. +dnl +dnl To ensure that this macro is defined, also add: +dnl m4_ifndef([PKG_PREREQ], +dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) +dnl +dnl See the "Since" comment for each macro you use to see what version +dnl of the macros you require. +m4_defun([PKG_PREREQ], +[m4_define([PKG_MACROS_VERSION], [0.29]) +m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, + [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) +])dnl PKG_PREREQ + +dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) +dnl ---------------------------------- +dnl Since: 0.16 +dnl +dnl Search for the pkg-config tool and set the PKG_CONFIG variable to +dnl first found in the path. Checks that the version of pkg-config found +dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is +dnl used since that's the first version where most current features of +dnl pkg-config existed. AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) @@ -67,18 +98,19 @@ PKG_CONFIG="" fi fi[]dnl -])# PKG_PROG_PKG_CONFIG +])dnl PKG_PROG_PKG_CONFIG -# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# -# Check to see whether a particular set of modules exists. Similar -# to PKG_CHECK_MODULES(), but does not set variables or print errors. -# -# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -# only at the first occurence in configure.ac, so if the first place -# it's called might be skipped (such as if it is within an "if", you -# have to call PKG_CHECK_EXISTS manually -# -------------------------------------------------------------- +dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +dnl ------------------------------------------------------------------- +dnl Since: 0.18 +dnl +dnl Check to see whether a particular set of modules exists. Similar to +dnl PKG_CHECK_MODULES(), but does not set variables or print errors. +dnl +dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +dnl only at the first occurence in configure.ac, so if the first place +dnl it's called might be skipped (such as if it is within an "if", you +dnl have to call PKG_CHECK_EXISTS manually AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ @@ -88,8 +120,10 @@ $3])dnl fi]) -# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -# --------------------------------------------- +dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +dnl --------------------------------------------- +dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting +dnl pkg_failed based on the result. m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" @@ -101,10 +135,11 @@ else pkg_failed=untried fi[]dnl -])# _PKG_CONFIG +])dnl _PKG_CONFIG -# _PKG_SHORT_ERRORS_SUPPORTED -# ----------------------------- +dnl _PKG_SHORT_ERRORS_SUPPORTED +dnl --------------------------- +dnl Internal check to see if pkg-config supports short errors. AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then @@ -112,19 +147,17 @@ else _pkg_short_errors_supported=no fi[]dnl -])# _PKG_SHORT_ERRORS_SUPPORTED +])dnl _PKG_SHORT_ERRORS_SUPPORTED -# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -# [ACTION-IF-NOT-FOUND]) -# -# -# Note that if there is a possibility the first call to -# PKG_CHECK_MODULES might not happen, you should be sure to include an -# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -# -# -# -------------------------------------------------------------- +dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +dnl [ACTION-IF-NOT-FOUND]) +dnl -------------------------------------------------------------- +dnl Since: 0.4.0 +dnl +dnl Note that if there is a possibility the first call to +dnl PKG_CHECK_MODULES might not happen, you should be sure to include an +dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl @@ -178,27 +211,107 @@ AC_MSG_RESULT([yes]) $3 fi[]dnl -])# PKG_CHECK_MODULES +])dnl PKG_CHECK_MODULES + -# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software -# Foundation, Inc. +dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +dnl [ACTION-IF-NOT-FOUND]) +dnl --------------------------------------------------------------------- +dnl Since: 0.29 +dnl +dnl Checks for existence of MODULES and gathers its build flags with +dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags +dnl and VARIABLE-PREFIX_LIBS from --libs. +dnl +dnl Note that if there is a possibility the first call to +dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to +dnl include an explicit call to PKG_PROG_PKG_CONFIG in your +dnl configure.ac. +AC_DEFUN([PKG_CHECK_MODULES_STATIC], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +_save_PKG_CONFIG=$PKG_CONFIG +PKG_CONFIG="$PKG_CONFIG --static" +PKG_CHECK_MODULES($@) +PKG_CONFIG=$_save_PKG_CONFIG[]dnl +])dnl PKG_CHECK_MODULES_STATIC + + +dnl PKG_INSTALLDIR([DIRECTORY]) +dnl ------------------------- +dnl Since: 0.27 +dnl +dnl Substitutes the variable pkgconfigdir as the location where a module +dnl should install pkg-config .pc files. By default the directory is +dnl $libdir/pkgconfig, but the default can be changed by passing +dnl DIRECTORY. The user can override through the --with-pkgconfigdir +dnl parameter. +AC_DEFUN([PKG_INSTALLDIR], +[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) +m4_pushdef([pkg_description], + [pkg-config installation directory @<:@]pkg_default[@:>@]) +AC_ARG_WITH([pkgconfigdir], + [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, + [with_pkgconfigdir=]pkg_default) +AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) +m4_popdef([pkg_default]) +m4_popdef([pkg_description]) +])dnl PKG_INSTALLDIR + + +dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) +dnl -------------------------------- +dnl Since: 0.27 +dnl +dnl Substitutes the variable noarch_pkgconfigdir as the location where a +dnl module should install arch-independent pkg-config .pc files. By +dnl default the directory is $datadir/pkgconfig, but the default can be +dnl changed by passing DIRECTORY. The user can override through the +dnl --with-noarch-pkgconfigdir parameter. +AC_DEFUN([PKG_NOARCH_INSTALLDIR], +[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) +m4_pushdef([pkg_description], + [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) +AC_ARG_WITH([noarch-pkgconfigdir], + [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, + [with_noarch_pkgconfigdir=]pkg_default) +AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) +m4_popdef([pkg_default]) +m4_popdef([pkg_description]) +])dnl PKG_NOARCH_INSTALLDIR + + +dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, +dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +dnl ------------------------------------------- +dnl Since: 0.28 +dnl +dnl Retrieves the value of the pkg-config variable for the given module. +AC_DEFUN([PKG_CHECK_VAR], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl + +_PKG_CONFIG([$1], [variable="][$3]["], [$2]) +AS_VAR_COPY([$1], [pkg_cv_][$1]) + +AS_VAR_IF([$1], [""], [$5], [$4])dnl +])dnl PKG_CHECK_VAR + +# Copyright (C) 2002-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 1 - # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.11' +[am__api_version='1.16' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.11.6], [], +m4_if([$1], [1.16.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -214,21 +327,19 @@ # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.11.6])dnl +[AM_AUTOMAKE_VERSION([1.16.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # Figure out how to run the assembler. -*- Autoconf -*- -# Copyright (C) 2001, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 5 - # AM_PROG_AS # ---------- AC_DEFUN([AM_PROG_AS], @@ -243,17 +354,15 @@ # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 1 - # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and @@ -272,7 +381,7 @@ # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you +# harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, @@ -290,30 +399,26 @@ # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` +[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 -# Free Software Foundation, Inc. +# Copyright (C) 1997-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 9 - # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl @@ -332,16 +437,14 @@ Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009, -# 2010, 2011 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 12 -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing @@ -351,7 +454,7 @@ # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was @@ -364,12 +467,13 @@ AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], UPC, [depcc="$UPC" am_compiler_list=], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], @@ -377,8 +481,8 @@ # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're @@ -418,16 +522,16 @@ : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - # We check with `-c' and `-o' for the sake of the "dashmstdout" + # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in @@ -436,8 +540,8 @@ test "$am__universal" = false || continue ;; nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else @@ -445,7 +549,7 @@ fi ;; msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has + # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} @@ -493,7 +597,7 @@ # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl @@ -503,9 +607,13 @@ # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' @@ -520,67 +628,54 @@ # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -#serial 5 - # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ - # Autoconf 2.62 quotes --file arguments for eval, but not when files + # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + AS_CASE([$CONFIG_FILES], + [*\'*], [eval set x "$CONFIG_FILES"], + [*], [set x $CONFIG_FILES]) shift - for mf + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf do # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line + am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`AS_DIRNAME(["$am_mf"])` + am_filepart=`AS_BASENAME(["$am_mf"])` + AM_RUN_LOG([cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles]) || am_rc=$? done + if test $am_rc -ne 0; then + AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking).]) + fi + AS_UNSET([am_dirpart]) + AS_UNSET([am_filepart]) + AS_UNSET([am_mf]) + AS_UNSET([am_rc]) + rm -f conftest-deps.mk } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS @@ -589,29 +684,31 @@ # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. +# This code is only required when automatic dependency tracking is enabled. +# This creates each '.Po' and '.Plo' makefile fragment that we'll need in +# order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) + [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])]) # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 16 - # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. +dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. +m4_define([AC_PROG_CC], +m4_defn([AC_PROG_CC]) +[_AM_PROG_CC_C_O +]) + # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- @@ -624,7 +721,7 @@ # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.62])dnl +[AC_PREREQ([2.65])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl @@ -653,33 +750,42 @@ # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl @@ -688,34 +794,82 @@ [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl ]) -_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl -dnl The `parallel-tests' driver may need to know about EXEEXT, so add the -dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro -dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. ]) -dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. @@ -737,21 +891,18 @@ done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation, -# Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 1 - # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -759,16 +910,14 @@ install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi -AC_SUBST(install_sh)]) +AC_SUBST([install_sh])]) -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2003-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 2 - # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], @@ -784,102 +933,55 @@ # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 - # AM_MAKE_INCLUDE() # ----------------- -# Check to see how make treats includes. +# Check whether make has an 'include' directive that can support all +# the idioms we need for our automatic dependency tracking code. AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' +[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive]) +cat > confinc.mk << 'END' am__doit: - @echo this is the am__doit target + @echo this is the am__doit target >confinc.out .PHONY: am__doit END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 6 - -# AM_PROG_CC_C_O -# -------------- -# Like AC_PROG_CC_C_O, but changed for automake. -AC_DEFUN([AM_PROG_CC_C_O], -[AC_REQUIRE([AC_PROG_CC_C_O])dnl -AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -# FIXME: we rely on the cache variable name because -# there is no other way. -set dummy $CC -am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` -eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o -if test "$am_t" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -dnl Make sure AC_PROG_CC is never called again, or it will override our -dnl setting of CC. -m4_define([AC_PROG_CC], - [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) -]) +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) + AS_CASE([$?:`cat confinc.out 2>/dev/null`], + ['0:this is the am__doit target'], + [AS_CASE([$s], + [BSD], [am__include='.include' am__quote='"'], + [am__include='include' am__quote=''])]) + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +AC_MSG_RESULT([${_am_result}]) +AC_SUBST([am__include])]) +AC_SUBST([am__quote])]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. +# Copyright (C) 1997-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 6 - # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], @@ -887,11 +989,10 @@ $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) - # AM_MISSING_HAS_RUN # ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl @@ -904,54 +1005,22 @@ esac fi # Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " else am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) + AC_MSG_WARN(['missing' script is too old or missing]) fi ]) -# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation, -# Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 1 - -# AM_PROG_MKDIR_P -# --------------- -# Check for `mkdir -p'. -AC_DEFUN([AM_PROG_MKDIR_P], -[AC_PREREQ([2.60])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -dnl while keeping a definition of mkdir_p for backward compatibility. -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -dnl Makefile.ins that do not define MKDIR_P, so we do our own -dnl adjustment using top_builddir (which is defined more often than -dnl MKDIR_P). -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -case $mkdir_p in - [[\\/$]]* | ?:[[\\/]]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac -]) - # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software -# Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 5 - # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], @@ -961,7 +1030,7 @@ # -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) # ------------------------ @@ -975,24 +1044,82 @@ AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# Check to make sure that the build environment is sane. -*- Autoconf -*- +# Copyright (C) 1999-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 -# Free Software Foundation, Inc. +# _AM_PROG_CC_C_O +# --------------- +# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC +# to automatically call this. +AC_DEFUN([_AM_PROG_CC_C_O], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) + +# For backward compatibility. +AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) + +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 5 +# AM_RUN_LOG(COMMAND) +# ------------------- +# Run COMMAND, save the exit status in ac_status, and log it. +# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +AC_DEFUN([AM_RUN_LOG], +[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' @@ -1003,32 +1130,40 @@ esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; esac -# Do `set' in a subshell so we don't clobber the current shell's +# Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done test "$[2]" = conftest.file ) then @@ -1038,46 +1173,118 @@ AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi -AC_MSG_RESULT(yes)]) +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) -# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. +# Copyright (C) 2009-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 1 +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2018 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- -# One issue with vendor `install' (even GNU) is that you can't +# One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize +# always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc. +# Copyright (C) 2006-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 - # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. @@ -1091,18 +1298,16 @@ # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc. +# Copyright (C) 2004-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 2 - # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory @@ -1112,76 +1317,114 @@ # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar +# AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AC_SUBST([AMTAR], ['$${TAR-tar}']) -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. + +# We'll loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi -done -rm -rf conftest.dir -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR diff -Nru sbsigntool-0.6/AUTHORS sbsigntool-0.9.2/AUTHORS --- sbsigntool-0.6/AUTHORS 2012-10-01 16:59:58.000000000 +0000 +++ sbsigntool-0.9.2/AUTHORS 2019-01-21 19:56:20.000000000 +0000 @@ -1,7 +1,13 @@ Authors of sbsigntool: Adam Conrad + Ard Biesheuvel + Ben Hutchings + Guy Lunardi Ivan Hu James Bottomley Jeremy Kerr + Linn Crosetto + Mathieu Trudel-Lapierre Maxim Kammerer + Steve Langasek diff -Nru sbsigntool-0.6/ChangeLog sbsigntool-0.9.2/ChangeLog --- sbsigntool-0.6/ChangeLog 2012-10-01 16:59:58.000000000 +0000 +++ sbsigntool-0.9.2/ChangeLog 2019-01-21 19:56:20.000000000 +0000 @@ -1,3 +1,171 @@ +2019-01-09 6082c13 James Bottomley + + * Version 0.9.2 + +2019-01-09 f770423 James Bottomley + + * src/image.c: remove alignment of regions + +2019-01-09 7d0af72 James Bottomley + + * sbvarsign: use SignedData instead of PKCS7 for authenticated updates + +2018-02-20 bfa0e2a Guy Lunardi + + * Fix Fedora Build + +2017-10-28 7c5ae40 James Bottomley + + * Version 0.9.1 + +2017-10-28 dd0cdb0 James Bottomley + + * sbsign, sbvarsign: support engine based private keys + +2017-10-19 5dbccc0 James Bottomley + + * Version 0.9 + +2017-10-19 ecb0bb9 James Bottomley + + * Fix Debian 8 and Leap_42.1 builds + +2017-10-19 da9e173 James Bottomley + + * tests: Fix up to work on arbitrary architectures + +2017-10-18 e755471 James Bottomley + + * tests/detach-remove.sh: fix for i386 pecoff size problems + +2017-10-18 a982caf James Bottomley + + * tests: fix up the generation of the test pecoff binary for gcc-7.2 + +2017-10-18 9695384 James Bottomley + + * tests: fix signature resign/reattach test problems + +2016-06-26 a674a7e Ben Hutchings + + * Update OpenSSL API usage to support OpenSSL 1.1 + +2017-10-18 be46e95 James Bottomley + + * make check: fix test environment problem + +2016-11-16 51cd64b James Bottomley + + * Add OPENSSL_config(NULL) to each binary to load openssl.cnf + +2016-02-14 81a96b3 James Bottomley + + * Version: 0.8 + +2016-02-12 69d05ff James Bottomley + + * sbkeysync: don't include efi.h + +2016-02-12 38575ff James Bottomley + + * configure: build on arm + +2016-01-27 cf9a310 Mathieu Trudel-Lapierre + + * sbverify: Clear out content for the signature we're building + +2015-10-27 b213bf3 Linn Crosetto + + * Handle odd buffer lengths in checksum + +2015-07-15 ce3550b Steve Langasek + + * Support openssl 1.0.2b and above + +2016-01-27 29639fd Ard Biesheuvel + + * sbsigntool: add support for ARM and Aarch64 PE/COFF images + +2016-01-27 59edca1 Ard Biesheuvel + + * sbsigntool: fix handling of zero sized sections + +2016-01-27 f5825a2 Ard Biesheuvel + + * sbsigntool: remove doubly defined IMAGE_FILE_MACHINE_AMD64 + +2016-01-27 0a7024f James Bottomley + + * sbverify: add extra expiry errors to ignore + +2016-01-27 2090a6c Steve Langasek + + * Update the PE checksum field using the somewhat-underdocumented algorithm, so that we match the Microsoft implementation in our signature generation. + +2015-01-06 67e3771 James Bottomley + + * OBS add correcting definition of EFI_ARCH + +2014-12-19 af00687 James Bottomley + + * Version 0.7 + +2014-12-19 39333a3 James Bottomley + + * sbsign, sbattach, sbverify: add multiple signature support + +2014-12-19 a5be9e5 James Bottomley + + * sbverify: fix verification + +2014-12-19 c6caf1b James Bottomley + + * Clear ssl errors after loading everyting + +2013-09-30 a482ebd James Bottomley + + * Fix for multi-sign + +2013-04-11 00271cd James Bottomley + + * image.c: clear image variable + +2012-11-13 130b244 Jeremy Kerr + + * sbkeysync: add corrected efivars magic + +2012-10-11 ce3498a Jeremy Kerr + + * Version 0.6 + +2012-10-10 7c4465c Jeremy Kerr + + * sbverify: explicitly trust all certificates given in --cert arguments + +2012-10-10 2038c41 Jeremy Kerr + + * sbverify: Add --verbose option + +2012-10-10 86219ed Jeremy Kerr + + * Version 0.5 + +2012-10-08 aa60392 Jeremy Kerr + + * sbkeysync: change default efivarfs mountpoint to /sys/.../efivars/ + +2012-10-02 53d38e7 Jeremy Kerr + + * Version 0.4 + +2012-10-02 e8a2989 Jeremy Kerr + + * image: improve handling of unaligned section tables + +2012-10-02 c6996fc Jeremy Kerr + + * image: use data_size in cert table header + 2012-09-28 01d2aa4 Jeremy Kerr * image: improve section table parsing diff -Nru sbsigntool-0.6/compile sbsigntool-0.9.2/compile --- sbsigntool-0.6/compile 2012-07-06 01:47:38.000000000 +0000 +++ sbsigntool-0.9.2/compile 1970-01-01 00:00:00.000000000 +0000 @@ -1,343 +0,0 @@ -#! /bin/sh -# Wrapper for compilers which do not understand '-c -o'. - -scriptversion=2012-03-05.13; # UTC - -# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free -# Software Foundation, Inc. -# Written by Tom Tromey . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# This file is maintained in Automake, please report -# bugs to or send patches to -# . - -nl=' -' - -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent tools from complaining about whitespace usage. -IFS=" "" $nl" - -file_conv= - -# func_file_conv build_file lazy -# Convert a $build file to $host form and store it in $file -# Currently only supports Windows hosts. If the determined conversion -# type is listed in (the comma separated) LAZY, no conversion will -# take place. -func_file_conv () -{ - file=$1 - case $file in - / | /[!/]*) # absolute file, and not a UNC file - if test -z "$file_conv"; then - # lazily determine how to convert abs files - case `uname -s` in - MINGW*) - file_conv=mingw - ;; - CYGWIN*) - file_conv=cygwin - ;; - *) - file_conv=wine - ;; - esac - fi - case $file_conv/,$2, in - *,$file_conv,*) - ;; - mingw/*) - file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` - ;; - cygwin/*) - file=`cygpath -m "$file" || echo "$file"` - ;; - wine/*) - file=`winepath -w "$file" || echo "$file"` - ;; - esac - ;; - esac -} - -# func_cl_dashL linkdir -# Make cl look for libraries in LINKDIR -func_cl_dashL () -{ - func_file_conv "$1" - if test -z "$lib_path"; then - lib_path=$file - else - lib_path="$lib_path;$file" - fi - linker_opts="$linker_opts -LIBPATH:$file" -} - -# func_cl_dashl library -# Do a library search-path lookup for cl -func_cl_dashl () -{ - lib=$1 - found=no - save_IFS=$IFS - IFS=';' - for dir in $lib_path $LIB - do - IFS=$save_IFS - if $shared && test -f "$dir/$lib.dll.lib"; then - found=yes - lib=$dir/$lib.dll.lib - break - fi - if test -f "$dir/$lib.lib"; then - found=yes - lib=$dir/$lib.lib - break - fi - done - IFS=$save_IFS - - if test "$found" != yes; then - lib=$lib.lib - fi -} - -# func_cl_wrapper cl arg... -# Adjust compile command to suit cl -func_cl_wrapper () -{ - # Assume a capable shell - lib_path= - shared=: - linker_opts= - for arg - do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - eat=1 - case $2 in - *.o | *.[oO][bB][jJ]) - func_file_conv "$2" - set x "$@" -Fo"$file" - shift - ;; - *) - func_file_conv "$2" - set x "$@" -Fe"$file" - shift - ;; - esac - ;; - -I) - eat=1 - func_file_conv "$2" mingw - set x "$@" -I"$file" - shift - ;; - -I*) - func_file_conv "${1#-I}" mingw - set x "$@" -I"$file" - shift - ;; - -l) - eat=1 - func_cl_dashl "$2" - set x "$@" "$lib" - shift - ;; - -l*) - func_cl_dashl "${1#-l}" - set x "$@" "$lib" - shift - ;; - -L) - eat=1 - func_cl_dashL "$2" - ;; - -L*) - func_cl_dashL "${1#-L}" - ;; - -static) - shared=false - ;; - -Wl,*) - arg=${1#-Wl,} - save_ifs="$IFS"; IFS=',' - for flag in $arg; do - IFS="$save_ifs" - linker_opts="$linker_opts $flag" - done - IFS="$save_ifs" - ;; - -Xlinker) - eat=1 - linker_opts="$linker_opts $2" - ;; - -*) - set x "$@" "$1" - shift - ;; - *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) - func_file_conv "$1" - set x "$@" -Tp"$file" - shift - ;; - *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) - func_file_conv "$1" mingw - set x "$@" "$file" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift - done - if test -n "$linker_opts"; then - linker_opts="-link$linker_opts" - fi - exec "$@" $linker_opts - exit 1 -} - -eat= - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: compile [--help] [--version] PROGRAM [ARGS] - -Wrapper for compilers which do not understand '-c -o'. -Remove '-o dest.o' from ARGS, run PROGRAM with the remaining -arguments, and rename the output as expected. - -If you are trying to build a whole package this is not the -right script to run: please start by reading the file 'INSTALL'. - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "compile $scriptversion" - exit $? - ;; - cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) - func_cl_wrapper "$@" # Doesn't return... - ;; -esac - -ofile= -cfile= - -for arg -do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - # So we strip '-o arg' only if arg is an object. - eat=1 - case $2 in - *.o | *.obj) - ofile=$2 - ;; - *) - set x "$@" -o "$2" - shift - ;; - esac - ;; - *.c) - cfile=$1 - set x "$@" "$1" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift -done - -if test -z "$ofile" || test -z "$cfile"; then - # If no '-o' option was seen then we might have been invoked from a - # pattern rule where we don't need one. That is ok -- this is a - # normal compilation that the losing compiler can handle. If no - # '.c' file was seen then we are probably linking. That is also - # ok. - exec "$@" -fi - -# Name of file we expect compiler to create. -cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` - -# Create the lock directory. -# Note: use '[/\\:.-]' here to ensure that we don't use the same name -# that we are using for the .o file. Also, base the name on the expected -# object file name, since that is what matters with a parallel build. -lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d -while true; do - if mkdir "$lockdir" >/dev/null 2>&1; then - break - fi - sleep 1 -done -# FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir '$lockdir'; exit 1" 1 2 15 - -# Run the compile. -"$@" -ret=$? - -if test -f "$cofile"; then - test "$cofile" = "$ofile" || mv "$cofile" "$ofile" -elif test -f "${cofile}bj"; then - test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" -fi - -rmdir "$lockdir" -exit $ret - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru sbsigntool-0.6/config.h.in sbsigntool-0.9.2/config.h.in --- sbsigntool-0.6/config.h.in 2012-10-12 00:18:26.000000000 +0000 +++ sbsigntool-0.9.2/config.h.in 2019-01-21 19:56:20.000000000 +0000 @@ -36,9 +36,6 @@ /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H -/* Define to 1 if your C compiler doesn't accept -c and -o together. */ -#undef NO_MINUS_C_MINUS_O - /* Name of package */ #undef PACKAGE diff -Nru sbsigntool-0.6/configure sbsigntool-0.9.2/configure --- sbsigntool-0.6/configure 2012-10-12 00:16:35.000000000 +0000 +++ sbsigntool-0.9.2/configure 1970-01-01 00:00:00.000000000 +0000 @@ -1,6981 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for sbsigntool 0.6. -# -# Report bugs to . -# -# -# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: jeremy.kerr@canonical.com about your system, including -$0: any error possibly output before this message. Then -$0: install a modern shell, or manually run the script -$0: under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='sbsigntool' -PACKAGE_TARNAME='sbsigntool' -PACKAGE_VERSION='0.6' -PACKAGE_STRING='sbsigntool 0.6' -PACKAGE_BUGREPORT='jeremy.kerr@canonical.com' -PACKAGE_URL='' - -ac_unique_file="src/sbsign.c" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIBOBJS -EFI_CPPFLAGS -uuid_LIBS -uuid_CFLAGS -libcrypto_LIBS -libcrypto_CFLAGS -PKG_CONFIG_LIBDIR -PKG_CONFIG_PATH -PKG_CONFIG -HELP2MAN -EGREP -GREP -OBJCOPY -RANLIB -CPP -am__fastdepCCAS_FALSE -am__fastdepCCAS_TRUE -CCASDEPMODE -CCASFLAGS -CCAS -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_dependency_tracking -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CCAS -CCASFLAGS -CPP -PKG_CONFIG -PKG_CONFIG_PATH -PKG_CONFIG_LIBDIR -libcrypto_CFLAGS -libcrypto_LIBS -uuid_CFLAGS -uuid_LIBS' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures sbsigntool 0.6 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/sbsigntool] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of sbsigntool 0.6:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CCAS assembler compiler command (defaults to CC) - CCASFLAGS assembler compiler flags (defaults to CFLAGS) - CPP C preprocessor - PKG_CONFIG path to pkg-config utility - PKG_CONFIG_PATH - directories to add to pkg-config's search path - PKG_CONFIG_LIBDIR - path overriding pkg-config's built-in search path - libcrypto_CFLAGS - C compiler flags for libcrypto, overriding pkg-config - libcrypto_LIBS - linker flags for libcrypto, overriding pkg-config - uuid_CFLAGS C compiler flags for uuid, overriding pkg-config - uuid_LIBS linker flags for uuid, overriding pkg-config - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -sbsigntool configure 0.6 -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -( $as_echo "## ---------------------------------------- ## -## Report this to jeremy.kerr@canonical.com ## -## ---------------------------------------- ##" - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_mongrel - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by sbsigntool $as_me 0.6, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -am__api_version='1.11' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; -esac - -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='sbsigntool' - VERSION='0.6' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AMTAR='$${TAR-tar}' - -am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' - - - - - - - - -ac_config_headers="$ac_config_headers config.h" - - - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - -# By default we simply use the C compiler to build assembly code. - -test "${CCAS+set}" = set || CCAS=$CC -test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS - - - -depcc="$CCAS" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CCAS_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CCAS_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CCAS_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CCAS_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; } -CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then - am__fastdepCCAS_TRUE= - am__fastdepCCAS_FALSE='#' -else - am__fastdepCCAS_TRUE='#' - am__fastdepCCAS_FALSE= -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - -if test "x$CC" != xcc; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5 -$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5 -$as_echo_n "checking whether cc understands -c and -o together... " >&6; } -fi -set dummy $CC; ac_cc=`$as_echo "$2" | - sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` -if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -# Make sure it works both with $CC and with simple cc. -# We do the test twice because some compilers refuse to overwrite an -# existing .o file with -o, though they will create one. -ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' -rm -f conftest2.* -if { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && - test -f conftest2.$ac_objext && { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; -then - eval ac_cv_prog_cc_${ac_cc}_c_o=yes - if test "x$CC" != xcc; then - # Test first that cc exists at all. - if { ac_try='cc -c conftest.$ac_ext >&5' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' - rm -f conftest2.* - if { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && - test -f conftest2.$ac_objext && { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; - then - # cc works too. - : - else - # cc exists but doesn't like -o. - eval ac_cv_prog_cc_${ac_cc}_c_o=no - fi - fi - fi -else - eval ac_cv_prog_cc_${ac_cc}_c_o=no -fi -rm -f core conftest* - -fi -if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h - -fi - -# FIXME: we rely on the cache variable name because -# there is no other way. -set dummy $CC -am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` -eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o -if test "$am_t" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objcopy", so it can be a program name with args. -set dummy ${ac_tool_prefix}objcopy; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJCOPY+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJCOPY"; then - ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OBJCOPY="${ac_tool_prefix}objcopy" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJCOPY=$ac_cv_prog_OBJCOPY -if test -n "$OBJCOPY"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY" >&5 -$as_echo "$OBJCOPY" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJCOPY"; then - ac_ct_OBJCOPY=$OBJCOPY - # Extract the first word of "objcopy", so it can be a program name with args. -set dummy objcopy; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJCOPY+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJCOPY"; then - ac_cv_prog_ac_ct_OBJCOPY="$ac_ct_OBJCOPY" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OBJCOPY="objcopy" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY -if test -n "$ac_ct_OBJCOPY"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJCOPY" >&5 -$as_echo "$ac_ct_OBJCOPY" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJCOPY" = x; then - OBJCOPY="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJCOPY=$ac_ct_OBJCOPY - fi -else - OBJCOPY="$ac_cv_prog_OBJCOPY" -fi - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -ac_fn_c_check_header_mongrel "$LINENO" "bfd.h" "ac_cv_header_bfd_h" "$ac_includes_default" -if test "x$ac_cv_header_bfd_h" = xyes; then : - -else - as_fn_error $? "bfd.h not found. -bfd.h is usually distributed in a binutils development package." "$LINENO" 5 -fi - - - -if test $cross_compiling = no; then - -HELP2MAN=${HELP2MAN-"${am_missing_run}help2man"} - -else - HELP2MAN=: -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system endianness" >&5 -$as_echo_n "checking build system endianness... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -#if __BYTE_ORDER != __LITTLE_ENDIAN - #error - #endif - ; - return 0; -} -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - endian=little - little_endian=1 - big_endian=0 -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -#if __BYTE_ORDER != __BIG_ENDIAN - #error - #endif - ; - return 0; -} -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - endian=big - little_endian=0 - big_endian=1 -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - -if test x"$endian" != "xbig" -a x"$endian" != "xlittle"; then - as_fn_error $? "Can't determine endianness; is endian.h present?" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $endian" >&5 -$as_echo "$endian" >&6; } - -cat >>confdefs.h <<_ACEOF -#define HAVE_LITTLE_ENDIAN $little_endian -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define HAVE_BIG_ENDIAN $big_endian -_ACEOF - - - - - - - - - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 -$as_echo "$PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 -$as_echo "$ac_pt_PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.9.0 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 -$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - PKG_CONFIG="" - fi -fi - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libcrypto" >&5 -$as_echo_n "checking for libcrypto... " >&6; } - -if test -n "$libcrypto_CFLAGS"; then - pkg_cv_libcrypto_CFLAGS="$libcrypto_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libcrypto\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libcrypto") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_libcrypto_CFLAGS=`$PKG_CONFIG --cflags "libcrypto" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$libcrypto_LIBS"; then - pkg_cv_libcrypto_LIBS="$libcrypto_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libcrypto\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libcrypto") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_libcrypto_LIBS=`$PKG_CONFIG --libs "libcrypto" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - libcrypto_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libcrypto" 2>&1` - else - libcrypto_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libcrypto" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$libcrypto_PKG_ERRORS" >&5 - - as_fn_error $? "libcrypto (from the OpenSSL package) is required" "$LINENO" 5 -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - as_fn_error $? "libcrypto (from the OpenSSL package) is required" "$LINENO" 5 -else - libcrypto_CFLAGS=$pkg_cv_libcrypto_CFLAGS - libcrypto_LIBS=$pkg_cv_libcrypto_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uuid" >&5 -$as_echo_n "checking for uuid... " >&6; } - -if test -n "$uuid_CFLAGS"; then - pkg_cv_uuid_CFLAGS="$uuid_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"uuid\""; } >&5 - ($PKG_CONFIG --exists --print-errors "uuid") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_uuid_CFLAGS=`$PKG_CONFIG --cflags "uuid" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$uuid_LIBS"; then - pkg_cv_uuid_LIBS="$uuid_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"uuid\""; } >&5 - ($PKG_CONFIG --exists --print-errors "uuid") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_uuid_LIBS=`$PKG_CONFIG --libs "uuid" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - uuid_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "uuid" 2>&1` - else - uuid_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "uuid" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$uuid_PKG_ERRORS" >&5 - - as_fn_error $? "libuuid (from the uuid package) is required" "$LINENO" 5 -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - as_fn_error $? "libuuid (from the uuid package) is required" "$LINENO" 5 -else - uuid_CFLAGS=$pkg_cv_uuid_CFLAGS - uuid_LIBS=$pkg_cv_uuid_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - -EFI_ARCH=$(uname -m) -EFI_CPPFLAGS="-I/usr/include/efi -I/usr/include/efi/$EFI_ARCH \ - -DEFI_FUNCTION_WRAPPER" -CPPFLAGS_save="$CPPFLAGS" -CPPFLAGS="$CPPFLAGS $EFI_CPPFLAGS" -for ac_header in efi.h -do : - ac_fn_c_check_header_compile "$LINENO" "efi.h" "ac_cv_header_efi_h" "$EFI_INCLUDES -" -if test "x$ac_cv_header_efi_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_EFI_H 1 -_ACEOF - -fi - -done - -CPPFLAGS="$CPPFLAGS_save" -EFI_CPPFLAGS=$EFI_CPPFLAGS - - -ac_config_files="$ac_config_files Makefile src/Makefile lib/ccan/Makefile docs/Makefile tests/Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCCAS\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by sbsigntool $as_me 0.6, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -sbsigntool config.status 0.6 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - "lib/ccan/Makefile") CONFIG_FILES="$CONFIG_FILES lib/ccan/Makefile" ;; - "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; - "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff -Nru sbsigntool-0.6/configure.ac sbsigntool-0.9.2/configure.ac --- sbsigntool-0.6/configure.ac 2012-10-12 00:15:11.000000000 +0000 +++ sbsigntool-0.9.2/configure.ac 2019-01-21 19:56:20.000000000 +0000 @@ -1,4 +1,4 @@ -AC_INIT([sbsigntool], [0.6], [jeremy.kerr@canonical.com]) +AC_INIT([sbsigntool], [0.9.2], [James.Bottomley@HansenPartnership.com]) AM_INIT_AUTOMAKE() @@ -64,7 +64,21 @@ AC_MSG_ERROR([libuuid (from the uuid package) is required])) dnl gnu-efi headers require extra include dirs -EFI_ARCH=$(uname -m) +EFI_ARCH=$(uname -m | sed 's/i.86/ia32/;s/arm.*/arm/') +AM_CONDITIONAL(TEST_BINARY_FORMAT, [ test "$EFI_ARCH" = "arm" -o "$EFI_ARCH" = "aarch64" ]) + +## +# no consistent view of where gnu-efi should dump the efi stuff, so find it +## +for path in /lib /lib64 /usr/lib /usr/lib64 /usr/lib32 /lib/efi /lib64/efi /usr/lib/efi /usr/lib64/efi /usr/lib/gnuefi /usr/lib64/gnuefi ; do + if test -e $path/crt0-efi-$EFI_ARCH.o; then + CRTPATH=$path + fi +done +if test -z "$CRTPATH"; then + AC_MSG_ERROR([cannot find the gnu-efi crt path]) +fi + EFI_CPPFLAGS="-I/usr/include/efi -I/usr/include/efi/$EFI_ARCH \ -DEFI_FUNCTION_WRAPPER" CPPFLAGS_save="$CPPFLAGS" @@ -72,6 +86,8 @@ AC_CHECK_HEADERS([efi.h], [], [], $EFI_INCLUDES) CPPFLAGS="$CPPFLAGS_save" AC_SUBST(EFI_CPPFLAGS, $EFI_CPPFLAGS) +AC_SUBST(EFI_ARCH, $EFI_ARCH) +AC_SUBST(CRTPATH, $CRTPATH) AC_CONFIG_FILES([Makefile src/Makefile lib/ccan/Makefile] [docs/Makefile tests/Makefile]) diff -Nru sbsigntool-0.6/debian/changelog sbsigntool-0.9.2/debian/changelog --- sbsigntool-0.6/debian/changelog 2018-02-05 16:53:19.000000000 +0000 +++ sbsigntool-0.9.2/debian/changelog 2021-03-25 13:52:52.000000000 +0000 @@ -1,3 +1,47 @@ +sbsigntool (0.9.2-2ubuntu1~18.04.1) bionic; urgency=medium + + * No-change backport to bionic: + - fix alignment of binaries and thus correct hash calculation LP: + #1921387 + + -- Dimitri John Ledkov Thu, 25 Mar 2021 13:52:52 +0000 + +sbsigntool (0.9.2-2ubuntu1) eoan; urgency=low + + * Merge from Debian unstable. Remaining changes: + - d/p/ubuntu-kernel-module-signing.patch and + d/p/ubuntu-kernel-module-signing-fixes.patch: add the kernel module + signing tool to the package. + - d/p/ubuntu-clear-image-before-use.patch: avoid use of uninitialised + data causing a startup crash. + * Dropped changes, included upstream: + - d/p/ubuntu-handle-odd-buffer-lengths-in-checksum.patch: correctly + handle odd byte length buffers. + * Dropped changes, obsoleted upstream: + - d/p/ubuntu-tests-disable-pie.patch: disable PIE + + -- Steve Langasek Fri, 03 May 2019 16:12:28 -0700 + +sbsigntool (0.9.2-2) unstable; urgency=medium + + * Change Maintainer to be the EFI team, with Pierre and me as Uploaders + * Remove the old alignment patch, looks to be un-needed now + * Fix PE/COFF checksum calculation - only count the cert_table + struct once when performing the calculation and counting buffer + sizes. + + -- Steve McIntyre <93sam@debian.org> Fri, 19 Apr 2019 23:41:15 +0200 + +sbsigntool (0.9.2-1) unstable; urgency=medium + + * Add watch file + * New upstream version 0.9.2 (Closes: #920013, #828696) + * Remove test file after clean + * Refreshed quilt patches, and removed all that were merged + * Use priority optional + + -- Pierre Chifflier Mon, 21 Jan 2019 21:20:40 +0100 + sbsigntool (0.6-3.2ubuntu2) bionic; urgency=high * No change rebuild against openssl1.1. @@ -198,3 +242,4 @@ * Initial release. -- Steve Langasek Thu, 28 Jun 2012 01:47:06 +0000 + diff -Nru sbsigntool-0.6/debian/control sbsigntool-0.9.2/debian/control --- sbsigntool-0.6/debian/control 2017-04-28 07:40:27.000000000 +0000 +++ sbsigntool-0.9.2/debian/control 2019-05-03 23:12:28.000000000 +0000 @@ -1,8 +1,10 @@ Source: sbsigntool Section: utils -Priority: extra +Priority: optional Maintainer: Ubuntu Developers -XSBC-Original-Maintainer: Pierre Chifflier +XSBC-Original-Maintainer: Debian EFI Team +Uploaders: Pierre Chifflier , + Steve McIntyre <93sam@debian.org> Build-Depends: debhelper (>= 9.0.0), dh-autoreconf, gcc-multilib [amd64 i386 kfreebsd-amd64], diff -Nru sbsigntool-0.6/debian/patches/0001-Support-openssl-1.0.2b-and-above.patch sbsigntool-0.9.2/debian/patches/0001-Support-openssl-1.0.2b-and-above.patch --- sbsigntool-0.6/debian/patches/0001-Support-openssl-1.0.2b-and-above.patch 2015-09-23 11:28:28.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/0001-Support-openssl-1.0.2b-and-above.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ -From 3186e24f5a46172cd771d61cdeec5e590f73743e Mon Sep 17 00:00:00 2001 -From: Steve Langasek -Date: Wed, 15 Jul 2015 08:48:25 -0700 -Subject: [PATCH] Support openssl 1.0.2b and above - -Newer versions of openssl return a different error with alternate -certificate chains; update for compatibility. - -Signed-off-by: Marc Deslauriers -Bug-Ubuntu: https://bugs.launchpad.net/bugs/1474541 ---- - src/sbverify.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/src/sbverify.c b/src/sbverify.c -index fb03d21..35890b9 100644 ---- a/src/sbverify.c -+++ b/src/sbverify.c -@@ -201,6 +201,7 @@ static int x509_verify_cb(int status, X509_STORE_CTX *ctx) - - /* all certs given with the --cert argument are trusted */ - else if (err == X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY || -+ err == X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT || - err == X509_V_ERR_CERT_UNTRUSTED) { - - if (cert_in_store(ctx->current_cert, ctx)) --- -2.1.4 - diff -Nru sbsigntool-0.6/debian/patches/01-efi-arch-ia32.patch sbsigntool-0.9.2/debian/patches/01-efi-arch-ia32.patch --- sbsigntool-0.6/debian/patches/01-efi-arch-ia32.patch 2015-03-25 17:04:13.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/01-efi-arch-ia32.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,18 +0,0 @@ -Description: Fix FTBFS on i386 by defining EFI_ARCH to ia32 instead of uname. -Author: Adam Conrad -Forwarded: no - ---- sbsigntool-0.4.orig/configure.ac -+++ sbsigntool-0.4/configure.ac -@@ -65,6 +65,11 @@ PKG_CHECK_MODULES(uuid, uuid, - - dnl gnu-efi headers require extra include dirs - EFI_ARCH=$(uname -m) -+case $EFI_ARCH in -+ i*86) -+ EFI_ARCH="ia32" -+ ;; -+esac - EFI_CPPFLAGS="-I/usr/include/efi -I/usr/include/efi/$EFI_ARCH \ - -DEFI_FUNCTION_WRAPPER" - CPPFLAGS_save="$CPPFLAGS" diff -Nru sbsigntool-0.6/debian/patches/10-tests-use-env.patch sbsigntool-0.9.2/debian/patches/10-tests-use-env.patch --- sbsigntool-0.6/debian/patches/10-tests-use-env.patch 2015-03-25 17:04:13.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/10-tests-use-env.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,13 +0,0 @@ -Index: sbsigntool-0.6/tests/Makefile.am -=================================================================== ---- sbsigntool-0.6.orig/tests/Makefile.am 2013-03-10 17:55:29.156376080 +0100 -+++ sbsigntool-0.6/tests/Makefile.am 2014-01-13 16:32:29.269396424 +0100 -@@ -58,7 +58,7 @@ - detach-remove.sh - - TEST_EXTENSIONS = .sh --SH_LOG_COMPILER = TEST_ARCHES="$(test_arches)" $(srcdir)/test-wrapper.sh -+SH_LOG_COMPILER = env TEST_ARCHES="$(test_arches)" $(srcdir)/test-wrapper.sh - - EXTRA_DIST = $(test_lds) test.S $(TESTS) $(check_SCRIPTS) - CLEANFILES = $(test_key) $(test_cert) $(test_images) diff -Nru sbsigntool-0.6/debian/patches/add_corrected_efivars_magic.patch sbsigntool-0.9.2/debian/patches/add_corrected_efivars_magic.patch --- sbsigntool-0.6/debian/patches/add_corrected_efivars_magic.patch 2015-09-23 11:28:28.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/add_corrected_efivars_magic.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ -Index: sbsigntool/src/sbkeysync.c -=================================================================== ---- sbsigntool.orig/src/sbkeysync.c 2013-12-03 15:45:49.007312000 +0100 -+++ sbsigntool/src/sbkeysync.c 2013-12-03 15:47:47.396135699 +0100 -@@ -56,7 +56,8 @@ - #include "efivars.h" - - #define EFIVARS_MOUNTPOINT "/sys/firmware/efi/efivars" --#define EFIVARS_FSTYPE 0x6165676C -+#define PSTORE_FSTYPE 0x6165676C -+#define EFIVARS_FSTYPE 0xde5e81e4 - - #define EFI_IMAGE_SECURITY_DATABASE_GUID \ - { 0xd719b2cb, 0x3d3a, 0x4596, \ -@@ -533,7 +534,7 @@ - if (rc) - return -1; - -- if (statbuf.f_type != EFIVARS_FSTYPE) -+ if (statbuf.f_type != EFIVARS_FSTYPE && statbuf.f_type != PSTORE_FSTYPE) - return -1; - - return 0; diff -Nru sbsigntool-0.6/debian/patches/Align-signature-data-to-8-bytes.patch sbsigntool-0.9.2/debian/patches/Align-signature-data-to-8-bytes.patch --- sbsigntool-0.6/debian/patches/Align-signature-data-to-8-bytes.patch 2015-09-23 11:27:17.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/Align-signature-data-to-8-bytes.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ -From 8b6b7a9904881757254b92a928b95dfb8634605b Mon Sep 17 00:00:00 2001 -From: Steve Langasek -Date: Fri, 12 Oct 2012 16:27:13 -0700 -Subject: [PATCH] Align signature data to 8 bytes - -Before appending the signature data to our binary, pad the file out to -8-byte alignment. This matches the Microsoft signing implementation, which -enables us to use sbattach to verify the integrity of the binaries returned -by the SysDev signing service. ---- - src/image.c | 2 ++ - 1 file changed, 2 insertions(+) - -Index: sbsigntool-0.6/src/image.c -=================================================================== ---- sbsigntool-0.6.orig/src/image.c -+++ sbsigntool-0.6/src/image.c -@@ -425,6 +425,8 @@ - * we've calculated during the pecoff parsing, so we need to redo that - * too. - */ -+ image->data_size = align_up(image->data_size, 8); -+ - if (image->data_size > image->size) { - image->buf = talloc_realloc(image, image->buf, uint8_t, - image->data_size); diff -Nru sbsigntool-0.6/debian/patches/arm-arm64-support.patch sbsigntool-0.9.2/debian/patches/arm-arm64-support.patch --- sbsigntool-0.6/debian/patches/arm-arm64-support.patch 2015-09-23 11:28:30.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/arm-arm64-support.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,50 +0,0 @@ -commit a3413e76f95472639d1b25f0564105d8bb4e2837 -Author: Ard Biesheuvel -Date: Tue Nov 19 09:25:32 2013 +0100 - - sbsigntool: add support for ARM and Aarch64 PE/COFF images - - Note that for the ARM case, we are using IMAGE_FILE_MACHINE_THUMB (0x1c2) - rather than IMAGE_FILE_MACHINE_ARM (0x1c0), as the latter refers to - an older calling convention that is incompatible with Tianocore UEFI. - - Signed-off-by: Ard Biesheuvel - -diff --git a/src/coff/pe.h b/src/coff/pe.h -index 3a43174..0d1036e 100644 ---- a/src/coff/pe.h -+++ b/src/coff/pe.h -@@ -151,6 +151,7 @@ - #define IMAGE_FILE_MACHINE_THUMB 0x01c2 - #define IMAGE_FILE_MACHINE_TRICORE 0x0520 - #define IMAGE_FILE_MACHINE_WCEMIPSV2 0x0169 -+#define IMAGE_FILE_MACHINE_AARCH64 0xaa64 - - #define IMAGE_SUBSYSTEM_UNKNOWN 0 - #define IMAGE_SUBSYSTEM_NATIVE 1 -diff --git a/src/image.c b/src/image.c -index c30d6e3..d6e3c48 100644 ---- a/src/image.c -+++ b/src/image.c -@@ -232,13 +232,16 @@ static int image_pecoff_parse(struct image *image) - image->opthdr.addr = image->pehdr + 1; - magic = pehdr_u16(image->pehdr->f_magic); - -- if (magic == IMAGE_FILE_MACHINE_AMD64) { -+ switch (magic) { -+ case IMAGE_FILE_MACHINE_AMD64: -+ case IMAGE_FILE_MACHINE_AARCH64: - rc = image_pecoff_parse_64(image); -- -- } else if (magic == IMAGE_FILE_MACHINE_I386) { -+ break; -+ case IMAGE_FILE_MACHINE_I386: -+ case IMAGE_FILE_MACHINE_THUMB: - rc = image_pecoff_parse_32(image); -- -- } else { -+ break; -+ default: - fprintf(stderr, "Invalid PE header magic\n"); - return -1; - } diff -Nru sbsigntool-0.6/debian/patches/del-duplicate-define.patch sbsigntool-0.9.2/debian/patches/del-duplicate-define.patch --- sbsigntool-0.6/debian/patches/del-duplicate-define.patch 2015-09-23 11:28:30.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/del-duplicate-define.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,20 +0,0 @@ -commit f09bf94b29cf050e7c489d8bd771b4392b3111ea -Author: Ard Biesheuvel -Date: Tue Nov 19 09:23:31 2013 +0100 - - sbsigntool: remove doubly defined IMAGE_FILE_MACHINE_AMD64 - - Signed-off-by: Ard Biesheuvel - -diff --git a/src/coff/pe.h b/src/coff/pe.h -index 601a68e..3a43174 100644 ---- a/src/coff/pe.h -+++ b/src/coff/pe.h -@@ -151,7 +151,6 @@ - #define IMAGE_FILE_MACHINE_THUMB 0x01c2 - #define IMAGE_FILE_MACHINE_TRICORE 0x0520 - #define IMAGE_FILE_MACHINE_WCEMIPSV2 0x0169 --#define IMAGE_FILE_MACHINE_AMD64 0x8664 - - #define IMAGE_SUBSYSTEM_UNKNOWN 0 - #define IMAGE_SUBSYSTEM_NATIVE 1 diff -Nru sbsigntool-0.6/debian/patches/fix_checksum_calc.patch sbsigntool-0.9.2/debian/patches/fix_checksum_calc.patch --- sbsigntool-0.6/debian/patches/fix_checksum_calc.patch 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/fix_checksum_calc.patch 2019-04-19 21:41:15.000000000 +0000 @@ -0,0 +1,37 @@ +Author: Steve McIntyre <93sam@debian.org> +Date: Fri, 19 Jun 2019 23:35:44 +0200 +Description: Fix PE/COFF checksum calculation + Upstream reconfigured the code to allow for multiple checksums to be + included on a binary, but mis-handled the change to buffer and + checksum handling such that the cert_table header was now being + counted twice. Fix that. +diff --git a/src/image.c b/src/image.c +index 745191f..3ada37b 100644 +--- a/src/image.c ++++ b/src/image.c +@@ -162,7 +162,6 @@ static void image_pecoff_update_checksum(struct image *image) + { + bool is_signed = image->sigsize && image->sigbuf; + uint32_t checksum; +- struct cert_table_header *cert_table = image->cert_table; + + /* We carefully only include the signature data in the checksum (and + * in the file length) if we're outputting the signature. Otherwise, +@@ -180,16 +179,13 @@ static void image_pecoff_update_checksum(struct image *image) + (void *)(image->checksum + 1)); + + if (is_signed) { +- checksum = csum_bytes(checksum, +- cert_table, sizeof(*cert_table)); +- + checksum = csum_bytes(checksum, image->sigbuf, image->sigsize); + } + + checksum += image->data_size; + + if (is_signed) +- checksum += sizeof(*cert_table) + image->sigsize; ++ checksum += image->sigsize; + + *(image->checksum) = cpu_to_le32(checksum); + } diff -Nru sbsigntool-0.6/debian/patches/fix-efi-arch-detection.patch sbsigntool-0.9.2/debian/patches/fix-efi-arch-detection.patch --- sbsigntool-0.6/debian/patches/fix-efi-arch-detection.patch 2016-06-26 20:59:28.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/fix-efi-arch-detection.patch 2019-04-20 03:12:22.000000000 +0000 @@ -5,15 +5,17 @@ In a cross-building environment or compat environment, this is not the same as the host architecture. Use AC_CANONICAL_HOST instead. ---- a/configure.ac -+++ b/configure.ac +Index: sbsigntool/configure.ac +=================================================================== +--- sbsigntool.orig/configure.ac ++++ sbsigntool/configure.ac @@ -64,7 +64,8 @@ PKG_CHECK_MODULES(uuid, uuid, AC_MSG_ERROR([libuuid (from the uuid package) is required])) dnl gnu-efi headers require extra include dirs --EFI_ARCH=$(uname -m) +-EFI_ARCH=$(uname -m | sed 's/i.86/ia32/;s/arm.*/arm/') +AC_CANONICAL_HOST -+EFI_ARCH=$host_cpu - case $EFI_ARCH in - i*86) - EFI_ARCH="ia32" ++EFI_ARCH=$(echo $host_cpu | sed 's/i.86/ia32/;s/arm.*/arm/') + AM_CONDITIONAL(TEST_BINARY_FORMAT, [ test "$EFI_ARCH" = "arm" -o "$EFI_ARCH" = "aarch64" ]) + + ## diff -Nru sbsigntool-0.6/debian/patches/fix-linker-flags-for-test-cases.patch sbsigntool-0.9.2/debian/patches/fix-linker-flags-for-test-cases.patch --- sbsigntool-0.6/debian/patches/fix-linker-flags-for-test-cases.patch 2017-01-29 01:00:17.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/fix-linker-flags-for-test-cases.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,21 +0,0 @@ -Author: Ben Hutchings -Date: Sun, 29 Jan 2017 00:25:50 +0000 -Description: Fix linker flags for test cases - We need to explicitly disable use of a dynamic linker. When using - Debian's binutils 2.27-9, ld succeeds but appears to generate broken - headers that cause the tests to fail. When using binutils 2.28, ld - fails, reporting "Not enough room for program headers, try linking - with -N". -Bug-Debian: https://bugs.debian.org/842446 - ---- a/tests/Makefile.am -+++ b/tests/Makefile.am -@@ -29,7 +29,7 @@ test-i386.pecoff: test_lds = $(srcdir)/t - test-i386.pecoff: ASFLAGS += -m32 - test-i386.pecoff: LDFLAGS += -m32 - --test-%.elf: LDFLAGS = -nostdlib -T $(test_lds) -+test-%.elf: LDFLAGS = -nostdlib -T $(test_lds) -Wl,--no-dynamic-linker - test-%.elf: test-%.$(OBJEXT) $(test_lds) - $(LINK) $< - diff -Nru sbsigntool-0.6/debian/patches/fix-signature-padding.patch sbsigntool-0.9.2/debian/patches/fix-signature-padding.patch --- sbsigntool-0.6/debian/patches/fix-signature-padding.patch 2015-09-23 11:28:30.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/fix-signature-padding.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ -Description: fix calculation of the size of our signature data - The 'size' field of the certificate table header includes the size of the - header itself. When parsing a signed file, we should therefore subtract the - size of this header from the field representing the size of the pkcs7 data - packet; otherwise when we detach (and subsequently reattach) a signature, - we wind up with 8 extra bytes of zeroes at the end each time. Fixing this - ensures that detaching and signature and then reattaching it to the file - gives us back the original file. -Author: Steve Langasek -Last-Update: 2013-09-07 - -Index: sbsigntool-0.6/src/image.c -=================================================================== ---- sbsigntool-0.6.orig/src/image.c -+++ sbsigntool-0.6/src/image.c -@@ -285,7 +285,7 @@ - if (cert_table && cert_table->revision == CERT_TABLE_REVISION && - cert_table->type == CERT_TABLE_TYPE_PKCS && - cert_table->size < size) { -- image->sigsize = cert_table->size; -+ image->sigsize = cert_table->size - sizeof(*cert_table); - image->sigbuf = talloc_memdup(image, cert_table + 1, - image->sigsize); - } diff -Nru sbsigntool-0.6/debian/patches/ignore-certificate-expiries.patch sbsigntool-0.9.2/debian/patches/ignore-certificate-expiries.patch --- sbsigntool-0.6/debian/patches/ignore-certificate-expiries.patch 2015-09-23 11:28:30.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/ignore-certificate-expiries.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,25 +0,0 @@ -Description: ignore certificate expiries when verifying signatures - The UEFI implementation explicitly ignores all errors due to expired (or - not yet valid) signatures. Ensure that sbverify behaves compatibly. -Author: Steve Langasek -Bug-Ubuntu: https://bugs.launchpad.net/bugs/1234649. -Last-Update: 2013-10-03 - -Index: sbsigntool-0.6/src/sbverify.c -=================================================================== ---- sbsigntool-0.6.orig/src/sbverify.c -+++ sbsigntool-0.6/src/sbverify.c -@@ -206,6 +206,13 @@ - if (cert_in_store(ctx->current_cert, ctx)) - status = 1; - } -+ /* UEFI doesn't care about expired signatures, so we shouldn't either. */ -+ else if (err == X509_V_ERR_CERT_HAS_EXPIRED || -+ err == X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD || -+ err == X509_V_ERR_CERT_NOT_YET_VALID || -+ err == X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD) { -+ status = 1; -+ } - - return status; - } diff -Nru sbsigntool-0.6/debian/patches/sbsign_check_write_return.patch sbsigntool-0.9.2/debian/patches/sbsign_check_write_return.patch --- sbsigntool-0.6/debian/patches/sbsign_check_write_return.patch 2016-04-18 21:02:53.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/sbsign_check_write_return.patch 2019-04-20 03:12:22.000000000 +0000 @@ -2,13 +2,13 @@ =================================================================== --- sbsigntool.orig/src/sbsign.c +++ sbsigntool/src/sbsign.c -@@ -220,12 +220,12 @@ int main(int argc, char **argv) - image_add_signature(ctx->image, buf, sigsize); +@@ -242,12 +242,12 @@ int main(int argc, char **argv) - if (ctx->detached) -- image_write_detached(ctx->image, ctx->outfilename); -+ rc = image_write_detached(ctx->image, ctx->outfilename); - else + for (i = 0; !image_get_signature(ctx->image, i, &buf, &len); i++) + ; +- image_write_detached(ctx->image, i - 1, ctx->outfilename); ++ rc = image_write_detached(ctx->image, i - 1, ctx->outfilename); + } else - image_write(ctx->image, ctx->outfilename); + rc = image_write(ctx->image, ctx->outfilename); @@ -22,7 +22,7 @@ =================================================================== --- sbsigntool.orig/src/fileio.c +++ sbsigntool/src/fileio.c -@@ -151,12 +151,12 @@ int fileio_write_file(const char *filena +@@ -201,12 +201,12 @@ int fileio_write_file(const char *filena fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, 0644); if (fd < 0) { @@ -41,7 +41,7 @@ =================================================================== --- sbsigntool.orig/src/image.c +++ sbsigntool/src/image.c -@@ -589,7 +589,7 @@ int image_write(struct image *image, con +@@ -658,7 +658,7 @@ int image_write(struct image *image, con fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, 0644); if (fd < 0) { diff -Nru sbsigntool-0.6/debian/patches/sbverify_clear_out_cert_content.patch sbsigntool-0.9.2/debian/patches/sbverify_clear_out_cert_content.patch --- sbsigntool-0.6/debian/patches/sbverify_clear_out_cert_content.patch 2016-03-08 07:00:16.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/sbverify_clear_out_cert_content.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ -From: Mathieu Trudel-Lapierre -Subject: Clear out content for the signature we're building -Bug-Ubuntu: https://launchpad.net/bugs/1526959 -Last-Update: 2015-12-17 - -OpenSSL 1.0.2e now actively checks for both data and contents being present -for a certificate. Clear out contents so that we have only data, and run a -chance of actually verifying the signature. - ---- - src/sbverify.c | 4 ++++ - 1 file changed, 4 insertions(+) - -Index: b/src/sbverify.c -=================================================================== ---- a/src/sbverify.c -+++ b/src/sbverify.c -@@ -324,6 +324,10 @@ int main(int argc, char **argv) - if (!verify) - flags |= PKCS7_NOVERIFY; - -+ /* OpenSSL 1.0.2e no longer allows calling PKCS7_verify with -+ * both data and content. Empty out the content. */ -+ p7->d.sign->contents->d.ptr=0; -+ - X509_STORE_set_verify_cb_func(certs, x509_verify_cb); - rc = PKCS7_verify(p7, NULL, certs, idcbio, NULL, flags); - if (!rc) { diff -Nru sbsigntool-0.6/debian/patches/series sbsigntool-0.9.2/debian/patches/series --- sbsigntool-0.6/debian/patches/series 2017-04-28 07:38:40.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/series 2019-05-03 23:12:28.000000000 +0000 @@ -1,21 +1,6 @@ -01-efi-arch-ia32.patch -10-tests-use-env.patch -Align-signature-data-to-8-bytes.patch -update_checksums.patch -fix-signature-padding.patch -ignore-certificate-expiries.patch -add_corrected_efivars_magic.patch -del-duplicate-define.patch -zero-sized-sections.patch -arm-arm64-support.patch -0001-Support-openssl-1.0.2b-and-above.patch -sbverify_clear_out_cert_content.patch sbsign_check_write_return.patch -update-openssl-api-usage-to-support-openssl-1.1.patch fix-efi-arch-detection.patch -fix-linker-flags-for-test-cases.patch -ubuntu-handle-odd-buffer-lengths-in-checksum.patch ubuntu-kernel-module-signing.patch ubuntu-kernel-module-signing-fixes.patch -ubuntu-tests-disable-pie.patch ubuntu-clear-image-before-use.patch +fix_checksum_calc.patch diff -Nru sbsigntool-0.6/debian/patches/ubuntu-handle-odd-buffer-lengths-in-checksum.patch sbsigntool-0.9.2/debian/patches/ubuntu-handle-odd-buffer-lengths-in-checksum.patch --- sbsigntool-0.6/debian/patches/ubuntu-handle-odd-buffer-lengths-in-checksum.patch 2017-04-28 07:29:44.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/ubuntu-handle-odd-buffer-lengths-in-checksum.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,42 +0,0 @@ -From 132a512b712ea77859960b928d44dd58f8c9869d Mon Sep 17 00:00:00 2001 -From: Linn Crosetto -Date: Tue, 27 Oct 2015 15:31:12 -0600 -Subject: [PATCH] Handle odd buffer lengths in checksum - -Buffers of odd length can be passed to the checksum, for example signatures. -csum_bytes uses a uint16_t so change the function to prevent overflowing the -buffer, while taking the extra byte into account if the length is odd. - -Signed-off-by: Linn Crosetto ---- - src/image.c | 11 +++++++---- - 1 file changed, 7 insertions(+), 4 deletions(-) - -diff --git a/src/image.c b/src/image.c -index d6e3c48..c41abd9 100644 ---- a/src/image.c -+++ b/src/image.c -@@ -140,13 +140,16 @@ static uint16_t csum_update_fold(uint16_t csum, uint16_t x) - static uint16_t csum_bytes(uint16_t checksum, void *buf, size_t len) - { - unsigned int i; -- uint16_t *p; -+ uint16_t *p = buf; - -- for (i = 0; i < len; i += sizeof(*p)) { -- p = buf + i; -- checksum = csum_update_fold(checksum, *p); -+ for (i = 0; i + sizeof(*p) <= len; i += sizeof(*p)) { -+ checksum = csum_update_fold(checksum, *p++); - } - -+ /* if length is odd, add the remaining byte */ -+ if (i < len) -+ checksum = csum_update_fold(checksum, *((uint8_t *)p)); -+ - return checksum; - } - --- -2.6.1 - diff -Nru sbsigntool-0.6/debian/patches/ubuntu-tests-disable-pie.patch sbsigntool-0.9.2/debian/patches/ubuntu-tests-disable-pie.patch --- sbsigntool-0.6/debian/patches/ubuntu-tests-disable-pie.patch 2017-04-28 07:38:11.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/ubuntu-tests-disable-pie.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,34 +0,0 @@ -Description: tests disable PIE - Disable PIE compiler support for the test kernel modules. -Forwarded: not-needed -Author: Andy Whitcroft -Last-Update: 2016-05-09 - -Index: sbsigntool-0.6/tests/Makefile.am -=================================================================== ---- sbsigntool-0.6.orig/tests/Makefile.am -+++ sbsigntool-0.6/tests/Makefile.am -@@ -22,19 +22,19 @@ test-%.pecoff: test-%.elf - - test-x86_64.pecoff: test_image_arch = x86-64 - test-x86_64.pecoff: test_lds = $(srcdir)/test-x86_64.lds --test-x86_64.pecoff: ASFLAGS += -m64 -+test-x86_64.pecoff: ASFLAGS += -m64 -fno-pic - test-x86_64.pecoff: LDFLAGS += -m64 - test-i386.pecoff: test_image_arch = i386 - test-i386.pecoff: test_lds = $(srcdir)/test-i386.lds --test-i386.pecoff: ASFLAGS += -m32 -+test-i386.pecoff: ASFLAGS += -m32 -fno-pic - test-i386.pecoff: LDFLAGS += -m32 - --test-%.elf: LDFLAGS = -nostdlib -T $(test_lds) -Wl,--no-dynamic-linker -+test-%.elf: LDFLAGS = -no-pie -nostdlib -T $(test_lds) -Wl,--no-dynamic-linker - test-%.elf: test-%.$(OBJEXT) $(test_lds) - $(LINK) $< - - test-%.$(OBJEXT): $(srcdir)/test.S -- $(COMPILE.S) -o $@ $^ -+ $(COMPILE.S) -fno-pie -o $@ $^ - - $(test_key): Makefile - openssl genrsa -out $@ 2048 diff -Nru sbsigntool-0.6/debian/patches/update_checksums.patch sbsigntool-0.9.2/debian/patches/update_checksums.patch --- sbsigntool-0.6/debian/patches/update_checksums.patch 2015-09-23 11:28:30.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/update_checksums.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,327 +0,0 @@ -From: Steve Langasek - -Update the PE checksum field using the somewhat-underdocumented -algorithm, so that we match the Microsoft implementation in our -signature generation. - -Signed-off-by: Jeremy Kerr - ---- - autogen.sh | 2 - - src/image.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 60 insertions(+), 1 deletion(-) - -Index: sbsigntool-0.6/src/image.c -=================================================================== ---- sbsigntool-0.6.orig/src/image.c -+++ sbsigntool-0.6/src/image.c -@@ -38,6 +38,7 @@ - #include - #include - -+#include - #include - #include - #include -@@ -129,6 +130,62 @@ - return 0; - } - -+static uint16_t csum_update_fold(uint16_t csum, uint16_t x) -+{ -+ uint32_t new = csum + x; -+ new = (new >> 16) + (new & 0xffff); -+ return new; -+} -+ -+static uint16_t csum_bytes(uint16_t checksum, void *buf, size_t len) -+{ -+ unsigned int i; -+ uint16_t *p; -+ -+ for (i = 0; i < len; i += sizeof(*p)) { -+ p = buf + i; -+ checksum = csum_update_fold(checksum, *p); -+ } -+ -+ return checksum; -+} -+ -+static void image_pecoff_update_checksum(struct image *image, -+ struct cert_table_header *cert_table) -+{ -+ bool is_signed = image->sigsize && image->sigbuf; -+ uint32_t checksum; -+ -+ /* We carefully only include the signature data in the checksum (and -+ * in the file length) if we're outputting the signature. Otherwise, -+ * in case of signature removal, the signature data is in the buffer -+ * we read in (as indicated by image->size), but we do *not* want to -+ * checksum it. -+ * -+ * We also skip the 32-bits of checksum data in the PE/COFF header. -+ */ -+ checksum = csum_bytes(0, image->buf, -+ (void *)image->checksum - (void *)image->buf); -+ checksum = csum_bytes(checksum, -+ image->checksum + 1, -+ (void *)(image->buf + image->data_size) - -+ (void *)(image->checksum + 1)); -+ -+ if (is_signed) { -+ checksum = csum_bytes(checksum, -+ cert_table, sizeof(*cert_table)); -+ -+ checksum = csum_bytes(checksum, image->sigbuf, image->sigsize); -+ } -+ -+ checksum += image->data_size; -+ -+ if (is_signed) -+ checksum += sizeof(*cert_table) + image->sigsize; -+ -+ *(image->checksum) = cpu_to_le32(checksum); -+} -+ - static int image_pecoff_parse(struct image *image) - { - struct cert_table_header *cert_table; -@@ -524,6 +581,8 @@ - image->data_dir_sigtable->size = 0; - } - -+ image_pecoff_update_checksum(image, &cert_table_header); -+ - fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, 0644); - if (fd < 0) { - perror("open"); ---- /dev/null -+++ sbsigntool-0.6/lib/ccan/ccan/endian/endian.h -@@ -0,0 +1,227 @@ -+/* Licensed under LGPLv2.1+ - see LICENSE file for details */ -+#ifndef CCAN_ENDIAN_H -+#define CCAN_ENDIAN_H -+#include -+#include "config.h" -+ -+#if HAVE_BYTESWAP_H -+#include -+#else -+/** -+ * bswap_16 - reverse bytes in a uint16_t value. -+ * @val: value whose bytes to swap. -+ * -+ * Example: -+ * // Output contains "1024 is 4 as two bytes reversed" -+ * printf("1024 is %u as two bytes reversed\n", bswap_16(1024)); -+ */ -+static inline uint16_t bswap_16(uint16_t val) -+{ -+ return ((val & (uint16_t)0x00ffU) << 8) -+ | ((val & (uint16_t)0xff00U) >> 8); -+} -+ -+/** -+ * bswap_32 - reverse bytes in a uint32_t value. -+ * @val: value whose bytes to swap. -+ * -+ * Example: -+ * // Output contains "1024 is 262144 as four bytes reversed" -+ * printf("1024 is %u as four bytes reversed\n", bswap_32(1024)); -+ */ -+static inline uint32_t bswap_32(uint32_t val) -+{ -+ return ((val & (uint32_t)0x000000ffUL) << 24) -+ | ((val & (uint32_t)0x0000ff00UL) << 8) -+ | ((val & (uint32_t)0x00ff0000UL) >> 8) -+ | ((val & (uint32_t)0xff000000UL) >> 24); -+} -+#endif /* !HAVE_BYTESWAP_H */ -+ -+#if !HAVE_BSWAP_64 -+/** -+ * bswap_64 - reverse bytes in a uint64_t value. -+ * @val: value whose bytes to swap. -+ * -+ * Example: -+ * // Output contains "1024 is 1125899906842624 as eight bytes reversed" -+ * printf("1024 is %llu as eight bytes reversed\n", -+ * (unsigned long long)bswap_64(1024)); -+ */ -+static inline uint64_t bswap_64(uint64_t val) -+{ -+ return ((val & (uint64_t)0x00000000000000ffULL) << 56) -+ | ((val & (uint64_t)0x000000000000ff00ULL) << 40) -+ | ((val & (uint64_t)0x0000000000ff0000ULL) << 24) -+ | ((val & (uint64_t)0x00000000ff000000ULL) << 8) -+ | ((val & (uint64_t)0x000000ff00000000ULL) >> 8) -+ | ((val & (uint64_t)0x0000ff0000000000ULL) >> 24) -+ | ((val & (uint64_t)0x00ff000000000000ULL) >> 40) -+ | ((val & (uint64_t)0xff00000000000000ULL) >> 56); -+} -+#endif -+ -+/* Sanity check the defines. We don't handle weird endianness. */ -+#if !HAVE_LITTLE_ENDIAN && !HAVE_BIG_ENDIAN -+#error "Unknown endian" -+#elif HAVE_LITTLE_ENDIAN && HAVE_BIG_ENDIAN -+#error "Can't compile for both big and little endian." -+#endif -+ -+/** -+ * cpu_to_le64 - convert a uint64_t value to little-endian -+ * @native: value to convert -+ */ -+static inline uint64_t cpu_to_le64(uint64_t native) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return native; -+#else -+ return bswap_64(native); -+#endif -+} -+ -+/** -+ * cpu_to_le32 - convert a uint32_t value to little-endian -+ * @native: value to convert -+ */ -+static inline uint32_t cpu_to_le32(uint32_t native) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return native; -+#else -+ return bswap_32(native); -+#endif -+} -+ -+/** -+ * cpu_to_le16 - convert a uint16_t value to little-endian -+ * @native: value to convert -+ */ -+static inline uint16_t cpu_to_le16(uint16_t native) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return native; -+#else -+ return bswap_16(native); -+#endif -+} -+ -+/** -+ * le64_to_cpu - convert a little-endian uint64_t value -+ * @le_val: little-endian value to convert -+ */ -+static inline uint64_t le64_to_cpu(uint64_t le_val) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return le_val; -+#else -+ return bswap_64(le_val); -+#endif -+} -+ -+/** -+ * le32_to_cpu - convert a little-endian uint32_t value -+ * @le_val: little-endian value to convert -+ */ -+static inline uint32_t le32_to_cpu(uint32_t le_val) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return le_val; -+#else -+ return bswap_32(le_val); -+#endif -+} -+ -+/** -+ * le16_to_cpu - convert a little-endian uint16_t value -+ * @le_val: little-endian value to convert -+ */ -+static inline uint16_t le16_to_cpu(uint16_t le_val) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return le_val; -+#else -+ return bswap_16(le_val); -+#endif -+} -+ -+/** -+ * cpu_to_be64 - convert a uint64_t value to big endian. -+ * @native: value to convert -+ */ -+static inline uint64_t cpu_to_be64(uint64_t native) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return bswap_64(native); -+#else -+ return native; -+#endif -+} -+ -+/** -+ * cpu_to_be32 - convert a uint32_t value to big endian. -+ * @native: value to convert -+ */ -+static inline uint32_t cpu_to_be32(uint32_t native) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return bswap_32(native); -+#else -+ return native; -+#endif -+} -+ -+/** -+ * cpu_to_be16 - convert a uint16_t value to big endian. -+ * @native: value to convert -+ */ -+static inline uint16_t cpu_to_be16(uint16_t native) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return bswap_16(native); -+#else -+ return native; -+#endif -+} -+ -+/** -+ * be64_to_cpu - convert a big-endian uint64_t value -+ * @be_val: big-endian value to convert -+ */ -+static inline uint64_t be64_to_cpu(uint64_t be_val) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return bswap_64(be_val); -+#else -+ return be_val; -+#endif -+} -+ -+/** -+ * be32_to_cpu - convert a big-endian uint32_t value -+ * @be_val: big-endian value to convert -+ */ -+static inline uint32_t be32_to_cpu(uint32_t be_val) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return bswap_32(be_val); -+#else -+ return be_val; -+#endif -+} -+ -+/** -+ * be16_to_cpu - convert a big-endian uint16_t value -+ * @be_val: big-endian value to convert -+ */ -+static inline uint16_t be16_to_cpu(uint16_t be_val) -+{ -+#if HAVE_LITTLE_ENDIAN -+ return bswap_16(be_val); -+#else -+ return be_val; -+#endif -+} -+ -+#endif /* CCAN_ENDIAN_H */ diff -Nru sbsigntool-0.6/debian/patches/update-openssl-api-usage-to-support-openssl-1.1.patch sbsigntool-0.9.2/debian/patches/update-openssl-api-usage-to-support-openssl-1.1.patch --- sbsigntool-0.6/debian/patches/update-openssl-api-usage-to-support-openssl-1.1.patch 2016-06-26 20:20:59.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/update-openssl-api-usage-to-support-openssl-1.1.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,143 +0,0 @@ -Author: Ben Hutchings -Date: Sun, 26 Jun 2016 22:04:29 +0200 -Description: Update OpenSSL API usage to support OpenSSL 1.1 - Most structure definitions in OpenSSL are now opaque and we must call - the appropriate accessor functions to get information from them. - Not all the accessors are available in older versions, so define the - missing accessors as macros. - . - The X509_retrieve_match() function is no longer usable, as we cannot - initialise an X509_OBJECT ourselves. Instead, iterate over the - certificate store and use X509_OBJECT_get_type and X509_cmp to - compare certificates. - ---- a/src/sbverify.c -+++ b/src/sbverify.c -@@ -55,6 +55,14 @@ - #include - #include - -+#if OPENSSL_VERSION_NUMBER < 0x10100000L -+#define X509_OBJECT_get0_X509(obj) ((obj)->data.x509) -+#define X509_OBJECT_get_type(obj) ((obj)->type) -+#define X509_STORE_CTX_get0_cert(ctx) ((ctx)->cert) -+#define X509_STORE_get0_objects(certs) ((certs)->objs) -+#define X509_get_extended_key_usage(cert) ((cert)->ex_xkusage) -+#endif -+ - static const char *toolname = "sbverify"; - static const int cert_name_len = 160; - -@@ -123,9 +131,9 @@ static void print_signature_info(PKCS7 * - - for (i = 0; i < sk_X509_num(p7->d.sign->cert); i++) { - cert = sk_X509_value(p7->d.sign->cert, i); -- X509_NAME_oneline(cert->cert_info->subject, -+ X509_NAME_oneline(X509_get_subject_name(cert), - subject_name, cert_name_len); -- X509_NAME_oneline(cert->cert_info->issuer, -+ X509_NAME_oneline(X509_get_issuer_name(cert), - issuer_name, cert_name_len); - - printf(" - subject: %s\n", subject_name); -@@ -136,20 +144,26 @@ static void print_signature_info(PKCS7 * - static void print_certificate_store_certs(X509_STORE *certs) - { - char subject_name[cert_name_len + 1], issuer_name[cert_name_len + 1]; -+ STACK_OF(X509_OBJECT) *objs; - X509_OBJECT *obj; -+ X509 *cert; - int i; - - printf("certificate store:\n"); - -- for (i = 0; i < sk_X509_OBJECT_num(certs->objs); i++) { -- obj = sk_X509_OBJECT_value(certs->objs, i); -+ objs = X509_STORE_get0_objects(certs); -+ -+ for (i = 0; i < sk_X509_OBJECT_num(objs); i++) { -+ obj = sk_X509_OBJECT_value(objs, i); - -- if (obj->type != X509_LU_X509) -+ if (X509_OBJECT_get_type(obj) != X509_LU_X509) - continue; - -- X509_NAME_oneline(obj->data.x509->cert_info->subject, -+ cert = X509_OBJECT_get0_X509(obj); -+ -+ X509_NAME_oneline(X509_get_subject_name(cert), - subject_name, cert_name_len); -- X509_NAME_oneline(obj->data.x509->cert_info->issuer, -+ X509_NAME_oneline(X509_get_issuer_name(cert), - issuer_name, cert_name_len); - - printf(" - subject: %s\n", subject_name); -@@ -182,12 +196,21 @@ static int load_detached_signature_data( - - static int cert_in_store(X509 *cert, X509_STORE_CTX *ctx) - { -- X509_OBJECT obj; -+ STACK_OF(X509_OBJECT) *objs; -+ X509_OBJECT *obj; -+ int i; -+ -+ objs = X509_STORE_get0_objects(X509_STORE_CTX_get0_store(ctx)); - -- obj.type = X509_LU_X509; -- obj.data.x509 = cert; -+ for (i = 0; i < sk_X509_OBJECT_num(objs); i++) { -+ obj = sk_X509_OBJECT_value(objs, i); - -- return X509_OBJECT_retrieve_match(ctx->ctx->objs, &obj) != NULL; -+ if (X509_OBJECT_get_type(obj) == X509_LU_X509 && -+ !X509_cmp(X509_OBJECT_get0_X509(obj), cert)) -+ return 1; -+ } -+ -+ return 0; - } - - static int x509_verify_cb(int status, X509_STORE_CTX *ctx) -@@ -195,8 +218,9 @@ static int x509_verify_cb(int status, X5 - int err = X509_STORE_CTX_get_error(ctx); - - /* also accept code-signing keys */ -- if (err == X509_V_ERR_INVALID_PURPOSE -- && ctx->cert->ex_xkusage == XKU_CODE_SIGN) -+ if (err == X509_V_ERR_INVALID_PURPOSE && -+ X509_get_extended_key_usage(X509_STORE_CTX_get0_cert(ctx)) -+ == XKU_CODE_SIGN) - status = 1; - - /* all certs given with the --cert argument are trusted */ -@@ -204,7 +228,7 @@ static int x509_verify_cb(int status, X5 - err == X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT || - err == X509_V_ERR_CERT_UNTRUSTED) { - -- if (cert_in_store(ctx->current_cert, ctx)) -+ if (cert_in_store(X509_STORE_CTX_get_current_cert(ctx), ctx)) - status = 1; - } - /* UEFI doesn't care about expired signatures, so we shouldn't either. */ ---- a/src/sbkeysync.c -+++ b/src/sbkeysync.c -@@ -204,16 +204,15 @@ static int x509_key_parse(struct key *ke - return -1; - - /* we use the X509 serial number as the key ID */ -- if (!x509->cert_info || !x509->cert_info->serialNumber) -+ serial = X509_get_serialNumber(x509); -+ if (!serial) - goto out; - -- serial = x509->cert_info->serialNumber; -- - key->id_len = ASN1_STRING_length(serial); - key->id = talloc_memdup(key, ASN1_STRING_data(serial), key->id_len); - - key->description = talloc_array(key, char, description_len); -- X509_NAME_oneline(x509->cert_info->subject, -+ X509_NAME_oneline(X509_get_subject_name(x509), - key->description, description_len); - - rc = 0; diff -Nru sbsigntool-0.6/debian/patches/zero-sized-sections.patch sbsigntool-0.9.2/debian/patches/zero-sized-sections.patch --- sbsigntool-0.6/debian/patches/zero-sized-sections.patch 2015-09-23 11:28:30.000000000 +0000 +++ sbsigntool-0.9.2/debian/patches/zero-sized-sections.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,81 +0,0 @@ -commit 8f596c238f36723c803e45dfb1f6f817e67bc51d -Author: Ard Biesheuvel -Date: Tue Nov 19 09:24:10 2013 +0100 - - sbsigntool: fix handling of zero sized sections - - The loop that iterates over the PE/COFF sections correctly skips zero - sized sections, but still increments the loop index 'i'. This results in - subsequent iterations poking into unallocated memory. - - Signed-off-by: Ard Biesheuvel - -diff --git a/src/image.c b/src/image.c -index a34f117..c30d6e3 100644 ---- a/src/image.c -+++ b/src/image.c -@@ -366,6 +366,7 @@ static int image_find_regions(struct image *image) - /* add COFF sections */ - for (i = 0; i < image->sections; i++) { - uint32_t file_offset, file_size; -+ int n; - - file_offset = pehdr_u32(image->scnhdr[i].s_scnptr); - file_size = pehdr_u32(image->scnhdr[i].s_size); -@@ -373,39 +374,39 @@ static int image_find_regions(struct image *image) - if (!file_size) - continue; - -- image->n_checksum_regions++; -+ n = image->n_checksum_regions++; - image->checksum_regions = talloc_realloc(image, - image->checksum_regions, - struct region, - image->n_checksum_regions); - regions = image->checksum_regions; - -- regions[i + 3].data = buf + file_offset; -- regions[i + 3].size = align_up(file_size, -+ regions[n].data = buf + file_offset; -+ regions[n].size = align_up(file_size, - image->file_alignment); -- regions[i + 3].name = talloc_strndup(image->checksum_regions, -+ regions[n].name = talloc_strndup(image->checksum_regions, - image->scnhdr[i].s_name, 8); -- bytes += regions[i + 3].size; -+ bytes += regions[n].size; - -- if (file_offset + regions[i+3].size > image->size) { -+ if (file_offset + regions[n].size > image->size) { - fprintf(stderr, "warning: file-aligned section %s " - "extends beyond end of file\n", -- regions[i+3].name); -+ regions[n].name); - } - -- if (regions[i+2].data + regions[i+2].size -- != regions[i+3].data) { -+ if (regions[n-1].data + regions[n-1].size -+ != regions[n].data) { - fprintf(stderr, "warning: gap in section table:\n"); - fprintf(stderr, " %-8s: 0x%08tx - 0x%08tx,\n", -- regions[i+2].name, -- regions[i+2].data - buf, -- regions[i+2].data + -- regions[i+2].size - buf); -+ regions[n-1].name, -+ regions[n-1].data - buf, -+ regions[n-1].data + -+ regions[n-1].size - buf); - fprintf(stderr, " %-8s: 0x%08tx - 0x%08tx,\n", -- regions[i+3].name, -- regions[i+3].data - buf, -- regions[i+3].data + -- regions[i+3].size - buf); -+ regions[n].name, -+ regions[n].data - buf, -+ regions[n].data + -+ regions[n].size - buf); - - - gap_warn = 1; diff -Nru sbsigntool-0.6/debian/rules sbsigntool-0.9.2/debian/rules --- sbsigntool-0.6/debian/rules 2016-06-26 18:54:52.000000000 +0000 +++ sbsigntool-0.9.2/debian/rules 2019-04-20 03:12:22.000000000 +0000 @@ -15,3 +15,7 @@ ifneq ($(filter amd64 i386 kfreebsd-amd64,$(DEB_HOST_ARCH)),) dh_auto_test endif + +override_dh_clean: + dh_clean + rm -f tests/test.elf diff -Nru sbsigntool-0.6/debian/watch sbsigntool-0.9.2/debian/watch --- sbsigntool-0.6/debian/watch 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/debian/watch 2019-04-19 14:34:38.000000000 +0000 @@ -0,0 +1,4 @@ +version=4 +opts="mode=git, pgpmode=none" \ +https://git.kernel.org/pub/scm/linux/kernel/git/jejb/sbsigntools.git \ +refs/tags/v([\d\.]+) debian uupdate diff -Nru sbsigntool-0.6/depcomp sbsigntool-0.9.2/depcomp --- sbsigntool-0.6/depcomp 2012-07-06 01:47:39.000000000 +0000 +++ sbsigntool-0.9.2/depcomp 1970-01-01 00:00:00.000000000 +0000 @@ -1,708 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2012-03-27.16; # UTC - -# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010, -# 2011, 2012 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva . - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by 'PROGRAMS ARGS'. - object Object file output by 'PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputting dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -# A tabulation character. -tab=' ' -# A newline character. -nl=' -' - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -cygpath_u="cygpath -u -f -" -if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvisualcpp -fi - -if test "$depmode" = msvc7msys; then - # This is just like msvc7 but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvc7 -fi - -if test "$depmode" = xlc; then - # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations. - gccflag=-qmakedep=gcc,-MF - depmode=gcc -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the "deleted header file" problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' "$nl" < "$tmpdepfile" | -## Some versions of gcc put a space before the ':'. On the theory -## that the space means something, we add a space to the output as -## well. hp depmode also adds that space, but also prefixes the VPATH -## to the object. Take care to not repeat it in the output. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like '#:fec' to the end of the - # dependency line. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr "$nl" ' ' >> "$depfile" - echo >> "$depfile" - - # The second pass generates a dummy entry for each header file. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -xlc) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts '$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.u - tmpdepfile2=$base.u - tmpdepfile3=$dir.libs/$base.u - "$@" -Wc,-M - else - tmpdepfile1=$dir$base.u - tmpdepfile2=$dir$base.u - tmpdepfile3=$dir$base.u - "$@" -M - fi - stat=$? - - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - # Each line is of the form 'foo.o: dependent.h'. - # Do two passes, one to just change these to - # '$object: dependent.h' and one to simply 'dependent.h:'. - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'. - # However on - # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using '\': - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - # tcc 0.9.26 (FIXME still under development at the moment of writing) - # will emit a similar output, but also prepend the continuation lines - # with horizontal tabulation characters. - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form 'foo.o: dependent.h', - # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'. - # Do two passes, one to just change these to - # '$object: dependent.h' and one to simply 'dependent.h:'. - sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \ - < "$tmpdepfile" > "$depfile" - sed ' - s/[ '"$tab"'][ '"$tab"']*/ /g - s/^ *// - s/ *\\*$// - s/^[^:]*: *// - /^$/d - /:$/d - s/$/ :/ - ' < "$tmpdepfile" >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" - # Add 'dependent.h:' lines. - sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in 'foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mechanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -msvc7) - if test "$libtool" = yes; then - showIncludes=-Wc,-showIncludes - else - showIncludes=-showIncludes - fi - "$@" $showIncludes > "$tmpdepfile" - stat=$? - grep -v '^Note: including file: ' "$tmpdepfile" - if test "$stat" = 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The first sed program below extracts the file names and escapes - # backslashes for cygpath. The second sed program outputs the file - # name when reading, but also accumulates all include files in the - # hold buffer in order to output them again at the end. This only - # works with sed implementations that can handle large buffers. - sed < "$tmpdepfile" -n ' -/^Note: including file: *\(.*\)/ { - s//\1/ - s/\\/\\\\/g - p -}' | $cygpath_u | sort -u | sed -n ' -s/ /\\ /g -s/\(.*\)/'"$tab"'\1 \\/p -s/.\(.*\) \\/\1:/ -H -$ { - s/.*/'"$tab"'/ - G - p -}' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvc7msys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove '-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for ':' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. - "$@" $dashmflag | - sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' "$nl" < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no eat=no - for arg - do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - if test $eat = yes; then - eat=no - continue - fi - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -arch) - eat=yes ;; - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix=`echo "$object" | sed 's/^.*\././'` - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - # makedepend may prepend the VPATH from the source file name to the object. - # No need to regex-escape $object, excess matching of '.' is harmless. - sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove '-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - IFS=" " - for arg - do - case "$arg" in - -o) - shift - ;; - $object) - shift - ;; - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E 2>/dev/null | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" - echo "$tab" >> "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvcmsys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru sbsigntool-0.6/docs/Makefile.in sbsigntool-0.9.2/docs/Makefile.in --- sbsigntool-0.6/docs/Makefile.in 2012-10-12 00:16:36.000000000 +0000 +++ sbsigntool-0.9.2/docs/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,455 +0,0 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ - esac; \ - test $$am__dry = yes; \ - } -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -subdir = docs -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -man1dir = $(mandir)/man1 -am__installdirs = "$(DESTDIR)$(man1dir)" -NROFF = nroff -MANS = $(man1_MANS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCAS = @CCAS@ -CCASDEPMODE = @CCASDEPMODE@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EFI_CPPFLAGS = @EFI_CPPFLAGS@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GREP = @GREP@ -HELP2MAN = @HELP2MAN@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build_alias = @build_alias@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host_alias = @host_alias@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libcrypto_CFLAGS = @libcrypto_CFLAGS@ -libcrypto_LIBS = @libcrypto_LIBS@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -uuid_CFLAGS = @uuid_CFLAGS@ -uuid_LIBS = @uuid_LIBS@ -man1_MANS = sbsign.1 sbverify.1 sbattach.1 sbvarsign.1 sbsiglist.1 -EXTRA_DIST = sbsign.1.in sbverify.1.in sbattach.1.in \ - sbvarsign.1.in sbsiglist.1.in - -CLEANFILES = $(man1_MANS) -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu docs/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -install-man1: $(man1_MANS) - @$(NORMAL_INSTALL) - @list1='$(man1_MANS)'; \ - list2=''; \ - test -n "$(man1dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.1[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ - done; } - -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @list='$(MANS)'; if test -n "$$list"; then \ - list=`for p in $$list; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ - if test -n "$$list" && \ - grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ - echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ - grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ - echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ - echo " typically \`make maintainer-clean' will remove them" >&2; \ - exit 1; \ - else :; fi; \ - else :; fi - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(MANS) -installdirs: - for dir in "$(DESTDIR)$(man1dir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-man - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: install-man1 - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-man - -uninstall-man: uninstall-man1 - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic distclean \ - distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-man1 install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ - uninstall-am uninstall-man uninstall-man1 - - -$(builddir)/%.1: $(srcdir)/%.1.in $(top_builddir)/src/% - $(MKDIR_P) $(@D) - $(HELP2MAN) --no-info -i $< -o $@ $(top_builddir)/src/$* - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru sbsigntool-0.6/INSTALL sbsigntool-0.9.2/INSTALL --- sbsigntool-0.6/INSTALL 2012-07-06 01:47:39.000000000 +0000 +++ sbsigntool-0.9.2/INSTALL 1970-01-01 00:00:00.000000000 +0000 @@ -1,370 +0,0 @@ -Installation Instructions -************************* - -Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, -Inc. - - Copying and distribution of this file, with or without modification, -are permitted in any medium without royalty provided the copyright -notice and this notice are preserved. This file is offered as-is, -without warranty of any kind. - -Basic Installation -================== - - Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for -instructions specific to this package. Some packages provide this -`INSTALL' file but do not implement all of the features documented -below. The lack of an optional feature in a given package is not -necessarily a bug. More recommendations for GNU packages can be found -in *note Makefile Conventions: (standards)Makefile Conventions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is -disabled by default to prevent problems with accidental use of stale -cache files. - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. - - The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. - - Running `configure' might take a while. While running, it prints - some messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package, generally using the just-built uninstalled binaries. - - 4. Type `make install' to install the programs and any data files and - documentation. When installing into a prefix owned by root, it is - recommended that the package be configured and built as a regular - user, and only the `make install' phase executed with root - privileges. - - 5. Optionally, type `make installcheck' to repeat any self-tests, but - this time using the binaries in their final installed location. - This target does not install anything. Running this target as a - regular user, particularly if the prior `make install' required - root privileges, verifies that the installation completed - correctly. - - 6. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - - 7. Often, you can also type `make uninstall' to remove the installed - files again. In practice, not all packages have tested that - uninstallation works correctly, even though it is required by the - GNU Coding Standards. - - 8. Some packages, particularly those that use Automake, provide `make - distcheck', which can by used by developers to test that all other - targets like `make install' and `make uninstall' work correctly. - This target is generally not run by end users. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. Run `./configure --help' -for details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c99 CFLAGS=-g LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. This -is known as a "VPATH" build. - - With a non-GNU `make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before -reconfiguring for another architecture. - - On MacOS X 10.5 and later systems, you can create libraries and -executables that work on multiple system types--known as "fat" or -"universal" binaries--by specifying multiple `-arch' options to the -compiler but only a single `-arch' option to the preprocessor. Like -this: - - ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CPP="gcc -E" CXXCPP="g++ -E" - - This is not guaranteed to produce working output in all cases, you -may have to build one architecture at a time and combine the results -using the `lipo' tool if you have problems. - -Installation Names -================== - - By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX', where PREFIX must be an -absolute file name. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. In general, the -default for these options is expressed in terms of `${prefix}', so that -specifying just `--prefix' will affect all of the other directory -specifications that were not explicitly provided. - - The most portable way to affect installation locations is to pass the -correct locations to `configure'; however, many packages provide one or -both of the following shortcuts of passing variable assignments to the -`make install' command line to change installation locations without -having to reconfigure or recompile. - - The first method involves providing an override variable for each -affected directory. For example, `make install -prefix=/alternate/directory' will choose an alternate location for all -directory configuration variables that were expressed in terms of -`${prefix}'. Any directories that were specified during `configure', -but not in terms of `${prefix}', must each be overridden at install -time for the entire installation to be relocated. The approach of -makefile variable overrides for each directory variable is required by -the GNU Coding Standards, and ideally causes no recompilation. -However, some platforms have known limitations with the semantics of -shared libraries that end up requiring recompilation when using this -method, particularly noticeable in packages that use GNU Libtool. - - The second method involves providing the `DESTDIR' variable. For -example, `make install DESTDIR=/alternate/directory' will prepend -`/alternate/directory' before all installation names. The approach of -`DESTDIR' overrides is not required by the GNU Coding Standards, and -does not work on platforms that have drive letters. On the other hand, -it does better at avoiding recompilation issues, and works well even -when some directory options were not specified in terms of `${prefix}' -at `configure' time. - -Optional Features -================= - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - - Some packages offer the ability to configure how verbose the -execution of `make' will be. For these packages, running `./configure ---enable-silent-rules' sets the default to minimal output, which can be -overridden with `make V=1'; while running `./configure ---disable-silent-rules' sets the default to verbose, which can be -overridden with `make V=0'. - -Particular systems -================== - - On HP-UX, the default C compiler is not ANSI C compatible. If GNU -CC is not installed, it is recommended to use the following options in -order to use an ANSI C compiler: - - ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" - -and if that doesn't work, install pre-built binaries of GCC for HP-UX. - - HP-UX `make' updates targets which have the same time stamps as -their prerequisites, which makes it generally unusable when shipped -generated files such as `configure' are involved. Use GNU `make' -instead. - - On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot -parse its `' header file. The option `-nodtk' can be used as -a workaround. If GNU CC is not installed, it is therefore recommended -to try - - ./configure CC="cc" - -and if that doesn't work, try - - ./configure CC="cc -nodtk" - - On Solaris, don't put `/usr/ucb' early in your `PATH'. This -directory contains several dysfunctional programs; working variants of -these programs are available in `/usr/bin'. So, if you need `/usr/ucb' -in your `PATH', put it _after_ `/usr/bin'. - - On Haiku, software installed for all users goes in `/boot/common', -not `/usr/local'. It is recommended to use the following options: - - ./configure --prefix=/boot/common - -Specifying the System Type -========================== - - There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of machine the package -will run on. Usually, assuming the package is built to be run on the -_same_ architectures, `configure' can figure that out, but if it prints -a message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS - KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - - Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). - -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf bug. Until the bug is fixed you can use this workaround: - - CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash - -`configure' Invocation -====================== - - `configure' recognizes the following options to control how it -operates. - -`--help' -`-h' - Print a summary of all of the options to `configure', and exit. - -`--help=short' -`--help=recursive' - Print a summary of the options unique to this package's - `configure', and exit. The `short' variant lists options used - only in the top level, while the `recursive' variant lists options - also present in any nested packages. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`--prefix=DIR' - Use DIR as the installation prefix. *note Installation Names:: - for more details, including other options available for fine-tuning - the installation locations. - -`--no-create' -`-n' - Run the configure checks, but stop before creating any output - files. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. - diff -Nru sbsigntool-0.6/install-sh sbsigntool-0.9.2/install-sh --- sbsigntool-0.6/install-sh 2012-07-06 01:47:38.000000000 +0000 +++ sbsigntool-0.9.2/install-sh 1970-01-01 00:00:00.000000000 +0000 @@ -1,527 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2011-01-19.21; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) dst_arg=$2 - # Protect names problematic for `test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; - - -T) no_target_directory=true;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - # Protect names problematic for `test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - do_exit='(exit $ret); exit $ret' - trap "ret=129; $do_exit" 1 - trap "ret=130; $do_exit" 2 - trap "ret=141; $do_exit" 13 - trap "ret=143; $do_exit" 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names problematic for `test' and other utilities. - case $src in - -* | [=\(\)!]) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - dst=$dst_arg - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test X"$d" = X && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru sbsigntool-0.6/lib/ccan/ccan/endian/endian.h sbsigntool-0.9.2/lib/ccan/ccan/endian/endian.h --- sbsigntool-0.6/lib/ccan/ccan/endian/endian.h 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/ccan/endian/endian.h 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,227 @@ +/* Licensed under LGPLv2.1+ - see LICENSE file for details */ +#ifndef CCAN_ENDIAN_H +#define CCAN_ENDIAN_H +#include +#include "config.h" + +#if HAVE_BYTESWAP_H +#include +#else +/** + * bswap_16 - reverse bytes in a uint16_t value. + * @val: value whose bytes to swap. + * + * Example: + * // Output contains "1024 is 4 as two bytes reversed" + * printf("1024 is %u as two bytes reversed\n", bswap_16(1024)); + */ +static inline uint16_t bswap_16(uint16_t val) +{ + return ((val & (uint16_t)0x00ffU) << 8) + | ((val & (uint16_t)0xff00U) >> 8); +} + +/** + * bswap_32 - reverse bytes in a uint32_t value. + * @val: value whose bytes to swap. + * + * Example: + * // Output contains "1024 is 262144 as four bytes reversed" + * printf("1024 is %u as four bytes reversed\n", bswap_32(1024)); + */ +static inline uint32_t bswap_32(uint32_t val) +{ + return ((val & (uint32_t)0x000000ffUL) << 24) + | ((val & (uint32_t)0x0000ff00UL) << 8) + | ((val & (uint32_t)0x00ff0000UL) >> 8) + | ((val & (uint32_t)0xff000000UL) >> 24); +} +#endif /* !HAVE_BYTESWAP_H */ + +#if !HAVE_BSWAP_64 +/** + * bswap_64 - reverse bytes in a uint64_t value. + * @val: value whose bytes to swap. + * + * Example: + * // Output contains "1024 is 1125899906842624 as eight bytes reversed" + * printf("1024 is %llu as eight bytes reversed\n", + * (unsigned long long)bswap_64(1024)); + */ +static inline uint64_t bswap_64(uint64_t val) +{ + return ((val & (uint64_t)0x00000000000000ffULL) << 56) + | ((val & (uint64_t)0x000000000000ff00ULL) << 40) + | ((val & (uint64_t)0x0000000000ff0000ULL) << 24) + | ((val & (uint64_t)0x00000000ff000000ULL) << 8) + | ((val & (uint64_t)0x000000ff00000000ULL) >> 8) + | ((val & (uint64_t)0x0000ff0000000000ULL) >> 24) + | ((val & (uint64_t)0x00ff000000000000ULL) >> 40) + | ((val & (uint64_t)0xff00000000000000ULL) >> 56); +} +#endif + +/* Sanity check the defines. We don't handle weird endianness. */ +#if !HAVE_LITTLE_ENDIAN && !HAVE_BIG_ENDIAN +#error "Unknown endian" +#elif HAVE_LITTLE_ENDIAN && HAVE_BIG_ENDIAN +#error "Can't compile for both big and little endian." +#endif + +/** + * cpu_to_le64 - convert a uint64_t value to little-endian + * @native: value to convert + */ +static inline uint64_t cpu_to_le64(uint64_t native) +{ +#if HAVE_LITTLE_ENDIAN + return native; +#else + return bswap_64(native); +#endif +} + +/** + * cpu_to_le32 - convert a uint32_t value to little-endian + * @native: value to convert + */ +static inline uint32_t cpu_to_le32(uint32_t native) +{ +#if HAVE_LITTLE_ENDIAN + return native; +#else + return bswap_32(native); +#endif +} + +/** + * cpu_to_le16 - convert a uint16_t value to little-endian + * @native: value to convert + */ +static inline uint16_t cpu_to_le16(uint16_t native) +{ +#if HAVE_LITTLE_ENDIAN + return native; +#else + return bswap_16(native); +#endif +} + +/** + * le64_to_cpu - convert a little-endian uint64_t value + * @le_val: little-endian value to convert + */ +static inline uint64_t le64_to_cpu(uint64_t le_val) +{ +#if HAVE_LITTLE_ENDIAN + return le_val; +#else + return bswap_64(le_val); +#endif +} + +/** + * le32_to_cpu - convert a little-endian uint32_t value + * @le_val: little-endian value to convert + */ +static inline uint32_t le32_to_cpu(uint32_t le_val) +{ +#if HAVE_LITTLE_ENDIAN + return le_val; +#else + return bswap_32(le_val); +#endif +} + +/** + * le16_to_cpu - convert a little-endian uint16_t value + * @le_val: little-endian value to convert + */ +static inline uint16_t le16_to_cpu(uint16_t le_val) +{ +#if HAVE_LITTLE_ENDIAN + return le_val; +#else + return bswap_16(le_val); +#endif +} + +/** + * cpu_to_be64 - convert a uint64_t value to big endian. + * @native: value to convert + */ +static inline uint64_t cpu_to_be64(uint64_t native) +{ +#if HAVE_LITTLE_ENDIAN + return bswap_64(native); +#else + return native; +#endif +} + +/** + * cpu_to_be32 - convert a uint32_t value to big endian. + * @native: value to convert + */ +static inline uint32_t cpu_to_be32(uint32_t native) +{ +#if HAVE_LITTLE_ENDIAN + return bswap_32(native); +#else + return native; +#endif +} + +/** + * cpu_to_be16 - convert a uint16_t value to big endian. + * @native: value to convert + */ +static inline uint16_t cpu_to_be16(uint16_t native) +{ +#if HAVE_LITTLE_ENDIAN + return bswap_16(native); +#else + return native; +#endif +} + +/** + * be64_to_cpu - convert a big-endian uint64_t value + * @be_val: big-endian value to convert + */ +static inline uint64_t be64_to_cpu(uint64_t be_val) +{ +#if HAVE_LITTLE_ENDIAN + return bswap_64(be_val); +#else + return be_val; +#endif +} + +/** + * be32_to_cpu - convert a big-endian uint32_t value + * @be_val: big-endian value to convert + */ +static inline uint32_t be32_to_cpu(uint32_t be_val) +{ +#if HAVE_LITTLE_ENDIAN + return bswap_32(be_val); +#else + return be_val; +#endif +} + +/** + * be16_to_cpu - convert a big-endian uint16_t value + * @be_val: big-endian value to convert + */ +static inline uint16_t be16_to_cpu(uint16_t be_val) +{ +#if HAVE_LITTLE_ENDIAN + return bswap_16(be_val); +#else + return be_val; +#endif +} + +#endif /* CCAN_ENDIAN_H */ diff -Nru sbsigntool-0.6/lib/ccan/ccan/endian/LICENSE sbsigntool-0.9.2/lib/ccan/ccan/endian/LICENSE --- sbsigntool-0.6/lib/ccan/ccan/endian/LICENSE 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/ccan/endian/LICENSE 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,510 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations +below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it +becomes a de-facto standard. To achieve this, non-free programs must +be allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control +compilation and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at least + three years, to give the same user the materials specified in + Subsection 6a, above, for a charge no more than the cost of + performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply, and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License +may add an explicit geographical distribution limitation excluding those +countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms +of the ordinary General Public License). + + To apply these terms, attach the following notices to the library. +It is safest to attach them to the start of each source file to most +effectively convey the exclusion of warranty; and each file should +have at least the "copyright" line and a pointer to where the full +notice is found. + + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the library, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James + Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff -Nru sbsigntool-0.6/lib/ccan/ccan/failtest/LICENSE sbsigntool-0.9.2/lib/ccan/ccan/failtest/LICENSE --- sbsigntool-0.6/lib/ccan/ccan/failtest/LICENSE 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/ccan/failtest/LICENSE 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,165 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + + This version of the GNU Lesser General Public License incorporates +the terms and conditions of version 3 of the GNU General Public +License, supplemented by the additional permissions listed below. + + 0. Additional Definitions. + + As used herein, "this License" refers to version 3 of the GNU Lesser +General Public License, and the "GNU GPL" refers to version 3 of the GNU +General Public License. + + "The Library" refers to a covered work governed by this License, +other than an Application or a Combined Work as defined below. + + An "Application" is any work that makes use of an interface provided +by the Library, but which is not otherwise based on the Library. +Defining a subclass of a class defined by the Library is deemed a mode +of using an interface provided by the Library. + + A "Combined Work" is a work produced by combining or linking an +Application with the Library. The particular version of the Library +with which the Combined Work was made is also called the "Linked +Version". + + The "Minimal Corresponding Source" for a Combined Work means the +Corresponding Source for the Combined Work, excluding any source code +for portions of the Combined Work that, considered in isolation, are +based on the Application, and not on the Linked Version. + + The "Corresponding Application Code" for a Combined Work means the +object code and/or source code for the Application, including any data +and utility programs needed for reproducing the Combined Work from the +Application, but excluding the System Libraries of the Combined Work. + + 1. Exception to Section 3 of the GNU GPL. + + You may convey a covered work under sections 3 and 4 of this License +without being bound by section 3 of the GNU GPL. + + 2. Conveying Modified Versions. + + If you modify a copy of the Library, and, in your modifications, a +facility refers to a function or data to be supplied by an Application +that uses the facility (other than as an argument passed when the +facility is invoked), then you may convey a copy of the modified +version: + + a) under this License, provided that you make a good faith effort to + ensure that, in the event an Application does not supply the + function or data, the facility still operates, and performs + whatever part of its purpose remains meaningful, or + + b) under the GNU GPL, with none of the additional permissions of + this License applicable to that copy. + + 3. Object Code Incorporating Material from Library Header Files. + + The object code form of an Application may incorporate material from +a header file that is part of the Library. You may convey such object +code under terms of your choice, provided that, if the incorporated +material is not limited to numerical parameters, data structure +layouts and accessors, or small macros, inline functions and templates +(ten or fewer lines in length), you do both of the following: + + a) Give prominent notice with each copy of the object code that the + Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the object code with a copy of the GNU GPL and this license + document. + + 4. Combined Works. + + You may convey a Combined Work under terms of your choice that, +taken together, effectively do not restrict modification of the +portions of the Library contained in the Combined Work and reverse +engineering for debugging such modifications, if you also do each of +the following: + + a) Give prominent notice with each copy of the Combined Work that + the Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the Combined Work with a copy of the GNU GPL and this license + document. + + c) For a Combined Work that displays copyright notices during + execution, include the copyright notice for the Library among + these notices, as well as a reference directing the user to the + copies of the GNU GPL and this license document. + + d) Do one of the following: + + 0) Convey the Minimal Corresponding Source under the terms of this + License, and the Corresponding Application Code in a form + suitable for, and under terms that permit, the user to + recombine or relink the Application with a modified version of + the Linked Version to produce a modified Combined Work, in the + manner specified by section 6 of the GNU GPL for conveying + Corresponding Source. + + 1) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (a) uses at run time + a copy of the Library already present on the user's computer + system, and (b) will operate properly with a modified version + of the Library that is interface-compatible with the Linked + Version. + + e) Provide Installation Information, but only if you would otherwise + be required to provide such information under section 6 of the + GNU GPL, and only to the extent that such information is + necessary to install and execute a modified version of the + Combined Work produced by recombining or relinking the + Application with a modified version of the Linked Version. (If + you use option 4d0, the Installation Information must accompany + the Minimal Corresponding Source and Corresponding Application + Code. If you use option 4d1, you must provide the Installation + Information in the manner specified by section 6 of the GNU GPL + for conveying Corresponding Source.) + + 5. Combined Libraries. + + You may place library facilities that are a work based on the +Library side by side in a single library together with other library +facilities that are not Applications and are not covered by this +License, and convey such a combined library under terms of your +choice, if you do both of the following: + + a) Accompany the combined library with a copy of the same work based + on the Library, uncombined with any other library facilities, + conveyed under the terms of this License. + + b) Give prominent notice with the combined library that part of it + is a work based on the Library, and explaining where to find the + accompanying uncombined form of the same work. + + 6. Revised Versions of the GNU Lesser General Public License. + + The Free Software Foundation may publish revised and/or new versions +of the GNU Lesser General Public License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the +Library as you received it specifies that a certain numbered version +of the GNU Lesser General Public License "or any later version" +applies to it, you have the option of following the terms and +conditions either of that published version or of any later version +published by the Free Software Foundation. If the Library as you +received it does not specify a version number of the GNU Lesser +General Public License, you may choose any version of the GNU Lesser +General Public License ever published by the Free Software Foundation. + + If the Library as you received it specifies that a proxy can decide +whether future versions of the GNU Lesser General Public License shall +apply, that proxy's public statement of acceptance of any version is +permanent authorization for you to choose that version for the +Library. diff -Nru sbsigntool-0.6/lib/ccan/ccan/htable/LICENSE sbsigntool-0.9.2/lib/ccan/ccan/htable/LICENSE --- sbsigntool-0.6/lib/ccan/ccan/htable/LICENSE 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/ccan/htable/LICENSE 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,510 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations +below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it +becomes a de-facto standard. To achieve this, non-free programs must +be allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control +compilation and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at least + three years, to give the same user the materials specified in + Subsection 6a, above, for a charge no more than the cost of + performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply, and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License +may add an explicit geographical distribution limitation excluding those +countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms +of the ordinary General Public License). + + To apply these terms, attach the following notices to the library. +It is safest to attach them to the start of each source file to most +effectively convey the exclusion of warranty; and each file should +have at least the "copyright" line and a pointer to where the full +notice is found. + + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the library, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James + Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff -Nru sbsigntool-0.6/lib/ccan/ccan/list/LICENSE sbsigntool-0.9.2/lib/ccan/ccan/list/LICENSE --- sbsigntool-0.6/lib/ccan/ccan/list/LICENSE 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/ccan/list/LICENSE 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,510 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations +below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it +becomes a de-facto standard. To achieve this, non-free programs must +be allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control +compilation and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at least + three years, to give the same user the materials specified in + Subsection 6a, above, for a charge no more than the cost of + performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply, and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License +may add an explicit geographical distribution limitation excluding those +countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms +of the ordinary General Public License). + + To apply these terms, attach the following notices to the library. +It is safest to attach them to the start of each source file to most +effectively convey the exclusion of warranty; and each file should +have at least the "copyright" line and a pointer to where the full +notice is found. + + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the library, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James + Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff -Nru sbsigntool-0.6/lib/ccan/ccan/read_write_all/LICENSE sbsigntool-0.9.2/lib/ccan/ccan/read_write_all/LICENSE --- sbsigntool-0.6/lib/ccan/ccan/read_write_all/LICENSE 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/ccan/read_write_all/LICENSE 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,510 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations +below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it +becomes a de-facto standard. To achieve this, non-free programs must +be allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control +compilation and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at least + three years, to give the same user the materials specified in + Subsection 6a, above, for a charge no more than the cost of + performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply, and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License +may add an explicit geographical distribution limitation excluding those +countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms +of the ordinary General Public License). + + To apply these terms, attach the following notices to the library. +It is safest to attach them to the start of each source file to most +effectively convey the exclusion of warranty; and each file should +have at least the "copyright" line and a pointer to where the full +notice is found. + + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the library, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James + Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff -Nru sbsigntool-0.6/lib/ccan/ccan/talloc/LICENSE sbsigntool-0.9.2/lib/ccan/ccan/talloc/LICENSE --- sbsigntool-0.6/lib/ccan/ccan/talloc/LICENSE 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/ccan/talloc/LICENSE 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,510 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations +below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it +becomes a de-facto standard. To achieve this, non-free programs must +be allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control +compilation and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at least + three years, to give the same user the materials specified in + Subsection 6a, above, for a charge no more than the cost of + performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply, and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License +may add an explicit geographical distribution limitation excluding those +countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms +of the ordinary General Public License). + + To apply these terms, attach the following notices to the library. +It is safest to attach them to the start of each source file to most +effectively convey the exclusion of warranty; and each file should +have at least the "copyright" line and a pointer to where the full +notice is found. + + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the library, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James + Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff -Nru sbsigntool-0.6/lib/ccan/ccan/time/LICENSE sbsigntool-0.9.2/lib/ccan/ccan/time/LICENSE --- sbsigntool-0.6/lib/ccan/ccan/time/LICENSE 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/ccan/time/LICENSE 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,17 @@ +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff -Nru sbsigntool-0.6/lib/ccan/ccan/tlist/LICENSE sbsigntool-0.9.2/lib/ccan/ccan/tlist/LICENSE --- sbsigntool-0.6/lib/ccan/ccan/tlist/LICENSE 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/ccan/tlist/LICENSE 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,165 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + + This version of the GNU Lesser General Public License incorporates +the terms and conditions of version 3 of the GNU General Public +License, supplemented by the additional permissions listed below. + + 0. Additional Definitions. + + As used herein, "this License" refers to version 3 of the GNU Lesser +General Public License, and the "GNU GPL" refers to version 3 of the GNU +General Public License. + + "The Library" refers to a covered work governed by this License, +other than an Application or a Combined Work as defined below. + + An "Application" is any work that makes use of an interface provided +by the Library, but which is not otherwise based on the Library. +Defining a subclass of a class defined by the Library is deemed a mode +of using an interface provided by the Library. + + A "Combined Work" is a work produced by combining or linking an +Application with the Library. The particular version of the Library +with which the Combined Work was made is also called the "Linked +Version". + + The "Minimal Corresponding Source" for a Combined Work means the +Corresponding Source for the Combined Work, excluding any source code +for portions of the Combined Work that, considered in isolation, are +based on the Application, and not on the Linked Version. + + The "Corresponding Application Code" for a Combined Work means the +object code and/or source code for the Application, including any data +and utility programs needed for reproducing the Combined Work from the +Application, but excluding the System Libraries of the Combined Work. + + 1. Exception to Section 3 of the GNU GPL. + + You may convey a covered work under sections 3 and 4 of this License +without being bound by section 3 of the GNU GPL. + + 2. Conveying Modified Versions. + + If you modify a copy of the Library, and, in your modifications, a +facility refers to a function or data to be supplied by an Application +that uses the facility (other than as an argument passed when the +facility is invoked), then you may convey a copy of the modified +version: + + a) under this License, provided that you make a good faith effort to + ensure that, in the event an Application does not supply the + function or data, the facility still operates, and performs + whatever part of its purpose remains meaningful, or + + b) under the GNU GPL, with none of the additional permissions of + this License applicable to that copy. + + 3. Object Code Incorporating Material from Library Header Files. + + The object code form of an Application may incorporate material from +a header file that is part of the Library. You may convey such object +code under terms of your choice, provided that, if the incorporated +material is not limited to numerical parameters, data structure +layouts and accessors, or small macros, inline functions and templates +(ten or fewer lines in length), you do both of the following: + + a) Give prominent notice with each copy of the object code that the + Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the object code with a copy of the GNU GPL and this license + document. + + 4. Combined Works. + + You may convey a Combined Work under terms of your choice that, +taken together, effectively do not restrict modification of the +portions of the Library contained in the Combined Work and reverse +engineering for debugging such modifications, if you also do each of +the following: + + a) Give prominent notice with each copy of the Combined Work that + the Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the Combined Work with a copy of the GNU GPL and this license + document. + + c) For a Combined Work that displays copyright notices during + execution, include the copyright notice for the Library among + these notices, as well as a reference directing the user to the + copies of the GNU GPL and this license document. + + d) Do one of the following: + + 0) Convey the Minimal Corresponding Source under the terms of this + License, and the Corresponding Application Code in a form + suitable for, and under terms that permit, the user to + recombine or relink the Application with a modified version of + the Linked Version to produce a modified Combined Work, in the + manner specified by section 6 of the GNU GPL for conveying + Corresponding Source. + + 1) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (a) uses at run time + a copy of the Library already present on the user's computer + system, and (b) will operate properly with a modified version + of the Library that is interface-compatible with the Linked + Version. + + e) Provide Installation Information, but only if you would otherwise + be required to provide such information under section 6 of the + GNU GPL, and only to the extent that such information is + necessary to install and execute a modified version of the + Combined Work produced by recombining or relinking the + Application with a modified version of the Linked Version. (If + you use option 4d0, the Installation Information must accompany + the Minimal Corresponding Source and Corresponding Application + Code. If you use option 4d1, you must provide the Installation + Information in the manner specified by section 6 of the GNU GPL + for conveying Corresponding Source.) + + 5. Combined Libraries. + + You may place library facilities that are a work based on the +Library side by side in a single library together with other library +facilities that are not Applications and are not covered by this +License, and convey such a combined library under terms of your +choice, if you do both of the following: + + a) Accompany the combined library with a copy of the same work based + on the Library, uncombined with any other library facilities, + conveyed under the terms of this License. + + b) Give prominent notice with the combined library that part of it + is a work based on the Library, and explaining where to find the + accompanying uncombined form of the same work. + + 6. Revised Versions of the GNU Lesser General Public License. + + The Free Software Foundation may publish revised and/or new versions +of the GNU Lesser General Public License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the +Library as you received it specifies that a certain numbered version +of the GNU Lesser General Public License "or any later version" +applies to it, you have the option of following the terms and +conditions either of that published version or of any later version +published by the Free Software Foundation. If the Library as you +received it does not specify a version number of the GNU Lesser +General Public License, you may choose any version of the GNU Lesser +General Public License ever published by the Free Software Foundation. + + If the Library as you received it specifies that a proxy can decide +whether future versions of the GNU Lesser General Public License shall +apply, that proxy's public statement of acceptance of any version is +permanent authorization for you to choose that version for the +Library. diff -Nru sbsigntool-0.6/lib/ccan/ccan/typesafe_cb/LICENSE sbsigntool-0.9.2/lib/ccan/ccan/typesafe_cb/LICENSE --- sbsigntool-0.6/lib/ccan/ccan/typesafe_cb/LICENSE 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/ccan/typesafe_cb/LICENSE 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,510 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations +below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it +becomes a de-facto standard. To achieve this, non-free programs must +be allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control +compilation and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at least + three years, to give the same user the materials specified in + Subsection 6a, above, for a charge no more than the cost of + performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply, and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License +may add an explicit geographical distribution limitation excluding those +countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms +of the ordinary General Public License). + + To apply these terms, attach the following notices to the library. +It is safest to attach them to the start of each source file to most +effectively convey the exclusion of warranty; and each file should +have at least the "copyright" line and a pointer to where the full +notice is found. + + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the library, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James + Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff -Nru sbsigntool-0.6/lib/ccan/licenses/BSD-MIT sbsigntool-0.9.2/lib/ccan/licenses/BSD-MIT --- sbsigntool-0.6/lib/ccan/licenses/BSD-MIT 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/licenses/BSD-MIT 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,17 @@ +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff -Nru sbsigntool-0.6/lib/ccan/licenses/LGPL-2.1 sbsigntool-0.9.2/lib/ccan/licenses/LGPL-2.1 --- sbsigntool-0.6/lib/ccan/licenses/LGPL-2.1 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/licenses/LGPL-2.1 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,510 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations +below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it +becomes a de-facto standard. To achieve this, non-free programs must +be allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control +compilation and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at least + three years, to give the same user the materials specified in + Subsection 6a, above, for a charge no more than the cost of + performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply, and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License +may add an explicit geographical distribution limitation excluding those +countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms +of the ordinary General Public License). + + To apply these terms, attach the following notices to the library. +It is safest to attach them to the start of each source file to most +effectively convey the exclusion of warranty; and each file should +have at least the "copyright" line and a pointer to where the full +notice is found. + + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the library, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James + Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff -Nru sbsigntool-0.6/lib/ccan/licenses/LGPL-3 sbsigntool-0.9.2/lib/ccan/licenses/LGPL-3 --- sbsigntool-0.6/lib/ccan/licenses/LGPL-3 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/licenses/LGPL-3 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,165 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + + This version of the GNU Lesser General Public License incorporates +the terms and conditions of version 3 of the GNU General Public +License, supplemented by the additional permissions listed below. + + 0. Additional Definitions. + + As used herein, "this License" refers to version 3 of the GNU Lesser +General Public License, and the "GNU GPL" refers to version 3 of the GNU +General Public License. + + "The Library" refers to a covered work governed by this License, +other than an Application or a Combined Work as defined below. + + An "Application" is any work that makes use of an interface provided +by the Library, but which is not otherwise based on the Library. +Defining a subclass of a class defined by the Library is deemed a mode +of using an interface provided by the Library. + + A "Combined Work" is a work produced by combining or linking an +Application with the Library. The particular version of the Library +with which the Combined Work was made is also called the "Linked +Version". + + The "Minimal Corresponding Source" for a Combined Work means the +Corresponding Source for the Combined Work, excluding any source code +for portions of the Combined Work that, considered in isolation, are +based on the Application, and not on the Linked Version. + + The "Corresponding Application Code" for a Combined Work means the +object code and/or source code for the Application, including any data +and utility programs needed for reproducing the Combined Work from the +Application, but excluding the System Libraries of the Combined Work. + + 1. Exception to Section 3 of the GNU GPL. + + You may convey a covered work under sections 3 and 4 of this License +without being bound by section 3 of the GNU GPL. + + 2. Conveying Modified Versions. + + If you modify a copy of the Library, and, in your modifications, a +facility refers to a function or data to be supplied by an Application +that uses the facility (other than as an argument passed when the +facility is invoked), then you may convey a copy of the modified +version: + + a) under this License, provided that you make a good faith effort to + ensure that, in the event an Application does not supply the + function or data, the facility still operates, and performs + whatever part of its purpose remains meaningful, or + + b) under the GNU GPL, with none of the additional permissions of + this License applicable to that copy. + + 3. Object Code Incorporating Material from Library Header Files. + + The object code form of an Application may incorporate material from +a header file that is part of the Library. You may convey such object +code under terms of your choice, provided that, if the incorporated +material is not limited to numerical parameters, data structure +layouts and accessors, or small macros, inline functions and templates +(ten or fewer lines in length), you do both of the following: + + a) Give prominent notice with each copy of the object code that the + Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the object code with a copy of the GNU GPL and this license + document. + + 4. Combined Works. + + You may convey a Combined Work under terms of your choice that, +taken together, effectively do not restrict modification of the +portions of the Library contained in the Combined Work and reverse +engineering for debugging such modifications, if you also do each of +the following: + + a) Give prominent notice with each copy of the Combined Work that + the Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the Combined Work with a copy of the GNU GPL and this license + document. + + c) For a Combined Work that displays copyright notices during + execution, include the copyright notice for the Library among + these notices, as well as a reference directing the user to the + copies of the GNU GPL and this license document. + + d) Do one of the following: + + 0) Convey the Minimal Corresponding Source under the terms of this + License, and the Corresponding Application Code in a form + suitable for, and under terms that permit, the user to + recombine or relink the Application with a modified version of + the Linked Version to produce a modified Combined Work, in the + manner specified by section 6 of the GNU GPL for conveying + Corresponding Source. + + 1) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (a) uses at run time + a copy of the Library already present on the user's computer + system, and (b) will operate properly with a modified version + of the Library that is interface-compatible with the Linked + Version. + + e) Provide Installation Information, but only if you would otherwise + be required to provide such information under section 6 of the + GNU GPL, and only to the extent that such information is + necessary to install and execute a modified version of the + Combined Work produced by recombining or relinking the + Application with a modified version of the Linked Version. (If + you use option 4d0, the Installation Information must accompany + the Minimal Corresponding Source and Corresponding Application + Code. If you use option 4d1, you must provide the Installation + Information in the manner specified by section 6 of the GNU GPL + for conveying Corresponding Source.) + + 5. Combined Libraries. + + You may place library facilities that are a work based on the +Library side by side in a single library together with other library +facilities that are not Applications and are not covered by this +License, and convey such a combined library under terms of your +choice, if you do both of the following: + + a) Accompany the combined library with a copy of the same work based + on the Library, uncombined with any other library facilities, + conveyed under the terms of this License. + + b) Give prominent notice with the combined library that part of it + is a work based on the Library, and explaining where to find the + accompanying uncombined form of the same work. + + 6. Revised Versions of the GNU Lesser General Public License. + + The Free Software Foundation may publish revised and/or new versions +of the GNU Lesser General Public License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the +Library as you received it specifies that a certain numbered version +of the GNU Lesser General Public License "or any later version" +applies to it, you have the option of following the terms and +conditions either of that published version or of any later version +published by the Free Software Foundation. If the Library as you +received it does not specify a version number of the GNU Lesser +General Public License, you may choose any version of the GNU Lesser +General Public License ever published by the Free Software Foundation. + + If the Library as you received it specifies that a proxy can decide +whether future versions of the GNU Lesser General Public License shall +apply, that proxy's public statement of acceptance of any version is +permanent authorization for you to choose that version for the +Library. diff -Nru sbsigntool-0.6/lib/ccan/Makefile.am sbsigntool-0.9.2/lib/ccan/Makefile.am --- sbsigntool-0.6/lib/ccan/Makefile.am 2012-10-01 16:59:21.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/Makefile.am 2019-01-21 19:56:20.000000000 +0000 @@ -1,32 +1,33 @@ noinst_LIBRARIES = libccan.a libccan_a_SOURCES = \ + ccan/read_write_all/read_write_all.c \ + ccan/read_write_all/read_write_all.h \ ccan/typesafe_cb/typesafe_cb.h \ + ccan/array_size/array_size.h \ ccan/tlist/tlist.h \ ccan/time/time.h \ ccan/time/time.c \ - ccan/tcon/tcon.h \ - ccan/talloc/talloc.h \ - ccan/talloc/talloc.c \ + ccan/list/list.c \ + ccan/list/list.h \ + ccan/compiler/compiler.h \ + ccan/str/debug.c \ + ccan/str/str.c \ ccan/str/str.h \ ccan/str/str_debug.h \ - ccan/str/str.c \ - ccan/str/debug.c \ - ccan/read_write_all/read_write_all.h \ - ccan/read_write_all/read_write_all.c \ - ccan/list/list.h \ - ccan/list/list.c \ - ccan/htable/htable_type.h \ - ccan/htable/htable.h \ - ccan/htable/htable.c \ - ccan/hash/hash.h \ - ccan/hash/hash.c \ - ccan/failtest/failtest_undo.h \ ccan/failtest/failtest_proto.h \ - ccan/failtest/failtest_override.h \ ccan/failtest/failtest.h \ + ccan/failtest/failtest_override.h \ + ccan/failtest/failtest_undo.h \ ccan/failtest/failtest.c \ - ccan/container_of/container_of.h \ - ccan/compiler/compiler.h \ - ccan/check_type/check_type.h \ + ccan/tcon/tcon.h \ ccan/build_assert/build_assert.h \ - ccan/array_size/array_size.h + ccan/check_type/check_type.h \ + ccan/htable/htable.c \ + ccan/htable/htable.h \ + ccan/htable/htable_type.h \ + ccan/talloc/talloc.c \ + ccan/talloc/talloc.h \ + ccan/hash/hash.h \ + ccan/hash/hash.c \ + ccan/endian/endian.h \ + ccan/container_of/container_of.h diff -Nru sbsigntool-0.6/lib/ccan/Makefile.in sbsigntool-0.9.2/lib/ccan/Makefile.in --- sbsigntool-0.6/lib/ccan/Makefile.in 2012-10-12 00:16:36.000000000 +0000 +++ sbsigntool-0.9.2/lib/ccan/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,623 +0,0 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ - esac; \ - test $$am__dry = yes; \ - } -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -subdir = lib/ccan -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LIBRARIES = $(noinst_LIBRARIES) -AR = ar -ARFLAGS = cru -libccan_a_AR = $(AR) $(ARFLAGS) -libccan_a_LIBADD = -am_libccan_a_OBJECTS = time.$(OBJEXT) talloc.$(OBJEXT) str.$(OBJEXT) \ - debug.$(OBJEXT) read_write_all.$(OBJEXT) list.$(OBJEXT) \ - htable.$(OBJEXT) hash.$(OBJEXT) failtest.$(OBJEXT) -libccan_a_OBJECTS = $(am_libccan_a_OBJECTS) -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -SOURCES = $(libccan_a_SOURCES) -DIST_SOURCES = $(libccan_a_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCAS = @CCAS@ -CCASDEPMODE = @CCASDEPMODE@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EFI_CPPFLAGS = @EFI_CPPFLAGS@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GREP = @GREP@ -HELP2MAN = @HELP2MAN@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build_alias = @build_alias@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host_alias = @host_alias@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libcrypto_CFLAGS = @libcrypto_CFLAGS@ -libcrypto_LIBS = @libcrypto_LIBS@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -uuid_CFLAGS = @uuid_CFLAGS@ -uuid_LIBS = @uuid_LIBS@ -noinst_LIBRARIES = libccan.a -libccan_a_SOURCES = \ - ccan/typesafe_cb/typesafe_cb.h \ - ccan/tlist/tlist.h \ - ccan/time/time.h \ - ccan/time/time.c \ - ccan/tcon/tcon.h \ - ccan/talloc/talloc.h \ - ccan/talloc/talloc.c \ - ccan/str/str.h \ - ccan/str/str_debug.h \ - ccan/str/str.c \ - ccan/str/debug.c \ - ccan/read_write_all/read_write_all.h \ - ccan/read_write_all/read_write_all.c \ - ccan/list/list.h \ - ccan/list/list.c \ - ccan/htable/htable_type.h \ - ccan/htable/htable.h \ - ccan/htable/htable.c \ - ccan/hash/hash.h \ - ccan/hash/hash.c \ - ccan/failtest/failtest_undo.h \ - ccan/failtest/failtest_proto.h \ - ccan/failtest/failtest_override.h \ - ccan/failtest/failtest.h \ - ccan/failtest/failtest.c \ - ccan/container_of/container_of.h \ - ccan/compiler/compiler.h \ - ccan/check_type/check_type.h \ - ccan/build_assert/build_assert.h \ - ccan/array_size/array_size.h - -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/ccan/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu lib/ccan/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLIBRARIES: - -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) -libccan.a: $(libccan_a_OBJECTS) $(libccan_a_DEPENDENCIES) $(EXTRA_libccan_a_DEPENDENCIES) - -rm -f libccan.a - $(libccan_a_AR) libccan.a $(libccan_a_OBJECTS) $(libccan_a_LIBADD) - $(RANLIB) libccan.a - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/debug.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/failtest.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hash.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htable.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/list.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/read_write_all.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/str.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/talloc.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/time.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -time.o: ccan/time/time.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT time.o -MD -MP -MF $(DEPDIR)/time.Tpo -c -o time.o `test -f 'ccan/time/time.c' || echo '$(srcdir)/'`ccan/time/time.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/time.Tpo $(DEPDIR)/time.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/time/time.c' object='time.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o time.o `test -f 'ccan/time/time.c' || echo '$(srcdir)/'`ccan/time/time.c - -time.obj: ccan/time/time.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT time.obj -MD -MP -MF $(DEPDIR)/time.Tpo -c -o time.obj `if test -f 'ccan/time/time.c'; then $(CYGPATH_W) 'ccan/time/time.c'; else $(CYGPATH_W) '$(srcdir)/ccan/time/time.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/time.Tpo $(DEPDIR)/time.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/time/time.c' object='time.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o time.obj `if test -f 'ccan/time/time.c'; then $(CYGPATH_W) 'ccan/time/time.c'; else $(CYGPATH_W) '$(srcdir)/ccan/time/time.c'; fi` - -talloc.o: ccan/talloc/talloc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT talloc.o -MD -MP -MF $(DEPDIR)/talloc.Tpo -c -o talloc.o `test -f 'ccan/talloc/talloc.c' || echo '$(srcdir)/'`ccan/talloc/talloc.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/talloc.Tpo $(DEPDIR)/talloc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/talloc/talloc.c' object='talloc.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o talloc.o `test -f 'ccan/talloc/talloc.c' || echo '$(srcdir)/'`ccan/talloc/talloc.c - -talloc.obj: ccan/talloc/talloc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT talloc.obj -MD -MP -MF $(DEPDIR)/talloc.Tpo -c -o talloc.obj `if test -f 'ccan/talloc/talloc.c'; then $(CYGPATH_W) 'ccan/talloc/talloc.c'; else $(CYGPATH_W) '$(srcdir)/ccan/talloc/talloc.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/talloc.Tpo $(DEPDIR)/talloc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/talloc/talloc.c' object='talloc.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o talloc.obj `if test -f 'ccan/talloc/talloc.c'; then $(CYGPATH_W) 'ccan/talloc/talloc.c'; else $(CYGPATH_W) '$(srcdir)/ccan/talloc/talloc.c'; fi` - -str.o: ccan/str/str.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT str.o -MD -MP -MF $(DEPDIR)/str.Tpo -c -o str.o `test -f 'ccan/str/str.c' || echo '$(srcdir)/'`ccan/str/str.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/str.Tpo $(DEPDIR)/str.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/str/str.c' object='str.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o str.o `test -f 'ccan/str/str.c' || echo '$(srcdir)/'`ccan/str/str.c - -str.obj: ccan/str/str.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT str.obj -MD -MP -MF $(DEPDIR)/str.Tpo -c -o str.obj `if test -f 'ccan/str/str.c'; then $(CYGPATH_W) 'ccan/str/str.c'; else $(CYGPATH_W) '$(srcdir)/ccan/str/str.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/str.Tpo $(DEPDIR)/str.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/str/str.c' object='str.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o str.obj `if test -f 'ccan/str/str.c'; then $(CYGPATH_W) 'ccan/str/str.c'; else $(CYGPATH_W) '$(srcdir)/ccan/str/str.c'; fi` - -debug.o: ccan/str/debug.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT debug.o -MD -MP -MF $(DEPDIR)/debug.Tpo -c -o debug.o `test -f 'ccan/str/debug.c' || echo '$(srcdir)/'`ccan/str/debug.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/debug.Tpo $(DEPDIR)/debug.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/str/debug.c' object='debug.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o debug.o `test -f 'ccan/str/debug.c' || echo '$(srcdir)/'`ccan/str/debug.c - -debug.obj: ccan/str/debug.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT debug.obj -MD -MP -MF $(DEPDIR)/debug.Tpo -c -o debug.obj `if test -f 'ccan/str/debug.c'; then $(CYGPATH_W) 'ccan/str/debug.c'; else $(CYGPATH_W) '$(srcdir)/ccan/str/debug.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/debug.Tpo $(DEPDIR)/debug.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/str/debug.c' object='debug.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o debug.obj `if test -f 'ccan/str/debug.c'; then $(CYGPATH_W) 'ccan/str/debug.c'; else $(CYGPATH_W) '$(srcdir)/ccan/str/debug.c'; fi` - -read_write_all.o: ccan/read_write_all/read_write_all.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT read_write_all.o -MD -MP -MF $(DEPDIR)/read_write_all.Tpo -c -o read_write_all.o `test -f 'ccan/read_write_all/read_write_all.c' || echo '$(srcdir)/'`ccan/read_write_all/read_write_all.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/read_write_all.Tpo $(DEPDIR)/read_write_all.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/read_write_all/read_write_all.c' object='read_write_all.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o read_write_all.o `test -f 'ccan/read_write_all/read_write_all.c' || echo '$(srcdir)/'`ccan/read_write_all/read_write_all.c - -read_write_all.obj: ccan/read_write_all/read_write_all.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT read_write_all.obj -MD -MP -MF $(DEPDIR)/read_write_all.Tpo -c -o read_write_all.obj `if test -f 'ccan/read_write_all/read_write_all.c'; then $(CYGPATH_W) 'ccan/read_write_all/read_write_all.c'; else $(CYGPATH_W) '$(srcdir)/ccan/read_write_all/read_write_all.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/read_write_all.Tpo $(DEPDIR)/read_write_all.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/read_write_all/read_write_all.c' object='read_write_all.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o read_write_all.obj `if test -f 'ccan/read_write_all/read_write_all.c'; then $(CYGPATH_W) 'ccan/read_write_all/read_write_all.c'; else $(CYGPATH_W) '$(srcdir)/ccan/read_write_all/read_write_all.c'; fi` - -list.o: ccan/list/list.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT list.o -MD -MP -MF $(DEPDIR)/list.Tpo -c -o list.o `test -f 'ccan/list/list.c' || echo '$(srcdir)/'`ccan/list/list.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/list.Tpo $(DEPDIR)/list.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/list/list.c' object='list.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o list.o `test -f 'ccan/list/list.c' || echo '$(srcdir)/'`ccan/list/list.c - -list.obj: ccan/list/list.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT list.obj -MD -MP -MF $(DEPDIR)/list.Tpo -c -o list.obj `if test -f 'ccan/list/list.c'; then $(CYGPATH_W) 'ccan/list/list.c'; else $(CYGPATH_W) '$(srcdir)/ccan/list/list.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/list.Tpo $(DEPDIR)/list.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/list/list.c' object='list.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o list.obj `if test -f 'ccan/list/list.c'; then $(CYGPATH_W) 'ccan/list/list.c'; else $(CYGPATH_W) '$(srcdir)/ccan/list/list.c'; fi` - -htable.o: ccan/htable/htable.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT htable.o -MD -MP -MF $(DEPDIR)/htable.Tpo -c -o htable.o `test -f 'ccan/htable/htable.c' || echo '$(srcdir)/'`ccan/htable/htable.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/htable.Tpo $(DEPDIR)/htable.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/htable/htable.c' object='htable.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o htable.o `test -f 'ccan/htable/htable.c' || echo '$(srcdir)/'`ccan/htable/htable.c - -htable.obj: ccan/htable/htable.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT htable.obj -MD -MP -MF $(DEPDIR)/htable.Tpo -c -o htable.obj `if test -f 'ccan/htable/htable.c'; then $(CYGPATH_W) 'ccan/htable/htable.c'; else $(CYGPATH_W) '$(srcdir)/ccan/htable/htable.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/htable.Tpo $(DEPDIR)/htable.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/htable/htable.c' object='htable.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o htable.obj `if test -f 'ccan/htable/htable.c'; then $(CYGPATH_W) 'ccan/htable/htable.c'; else $(CYGPATH_W) '$(srcdir)/ccan/htable/htable.c'; fi` - -hash.o: ccan/hash/hash.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT hash.o -MD -MP -MF $(DEPDIR)/hash.Tpo -c -o hash.o `test -f 'ccan/hash/hash.c' || echo '$(srcdir)/'`ccan/hash/hash.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/hash.Tpo $(DEPDIR)/hash.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/hash/hash.c' object='hash.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o hash.o `test -f 'ccan/hash/hash.c' || echo '$(srcdir)/'`ccan/hash/hash.c - -hash.obj: ccan/hash/hash.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT hash.obj -MD -MP -MF $(DEPDIR)/hash.Tpo -c -o hash.obj `if test -f 'ccan/hash/hash.c'; then $(CYGPATH_W) 'ccan/hash/hash.c'; else $(CYGPATH_W) '$(srcdir)/ccan/hash/hash.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/hash.Tpo $(DEPDIR)/hash.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/hash/hash.c' object='hash.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o hash.obj `if test -f 'ccan/hash/hash.c'; then $(CYGPATH_W) 'ccan/hash/hash.c'; else $(CYGPATH_W) '$(srcdir)/ccan/hash/hash.c'; fi` - -failtest.o: ccan/failtest/failtest.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT failtest.o -MD -MP -MF $(DEPDIR)/failtest.Tpo -c -o failtest.o `test -f 'ccan/failtest/failtest.c' || echo '$(srcdir)/'`ccan/failtest/failtest.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/failtest.Tpo $(DEPDIR)/failtest.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/failtest/failtest.c' object='failtest.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o failtest.o `test -f 'ccan/failtest/failtest.c' || echo '$(srcdir)/'`ccan/failtest/failtest.c - -failtest.obj: ccan/failtest/failtest.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT failtest.obj -MD -MP -MF $(DEPDIR)/failtest.Tpo -c -o failtest.obj `if test -f 'ccan/failtest/failtest.c'; then $(CYGPATH_W) 'ccan/failtest/failtest.c'; else $(CYGPATH_W) '$(srcdir)/ccan/failtest/failtest.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/failtest.Tpo $(DEPDIR)/failtest.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ccan/failtest/failtest.c' object='failtest.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o failtest.obj `if test -f 'ccan/failtest/failtest.c'; then $(CYGPATH_W) 'ccan/failtest/failtest.c'; else $(CYGPATH_W) '$(srcdir)/ccan/failtest/failtest.c'; fi` - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-noinstLIBRARIES ctags distclean distclean-compile \ - distclean-generic distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ - uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru sbsigntool-0.6/LICENSE.GPLv3 sbsigntool-0.9.2/LICENSE.GPLv3 --- sbsigntool-0.6/LICENSE.GPLv3 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/LICENSE.GPLv3 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,621 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS diff -Nru sbsigntool-0.6/Makefile.in sbsigntool-0.9.2/Makefile.in --- sbsigntool-0.6/Makefile.in 2012-10-12 00:16:36.000000000 +0000 +++ sbsigntool-0.9.2/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,731 +0,0 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ - esac; \ - test $$am__dry = yes; \ - } -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -subdir = . -DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ - compile depcomp install-sh missing -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir dist dist-all distcheck -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -distuninstallcheck_listfiles = find . -type f -print -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCAS = @CCAS@ -CCASDEPMODE = @CCASDEPMODE@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EFI_CPPFLAGS = @EFI_CPPFLAGS@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GREP = @GREP@ -HELP2MAN = @HELP2MAN@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build_alias = @build_alias@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host_alias = @host_alias@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libcrypto_CFLAGS = @libcrypto_CFLAGS@ -libcrypto_LIBS = @libcrypto_LIBS@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -uuid_CFLAGS = @uuid_CFLAGS@ -uuid_LIBS = @uuid_LIBS@ -SUBDIRS = lib/ccan src docs tests -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -config.h: stamp-h1 - @if test ! -f $@; then rm -f stamp-h1; else :; fi - @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__remove_distdir) - -dist-lzma: distdir - tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma - $(am__remove_distdir) - -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) - -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ - lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir); chmod u+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile config.h -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ - ctags-recursive install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am am--refresh check check-am clean clean-generic \ - ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ - dist-lzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ - distcheck distclean distclean-generic distclean-hdr \ - distclean-tags distcleancheck distdir distuninstallcheck dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs installdirs-am \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru sbsigntool-0.6/missing sbsigntool-0.9.2/missing --- sbsigntool-0.6/missing 2012-07-06 01:47:38.000000000 +0000 +++ sbsigntool-0.9.2/missing 1970-01-01 00:00:00.000000000 +0000 @@ -1,331 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. - -scriptversion=2012-01-06.13; # UTC - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" - -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - yacc create \`y.tab.[ch]', if possible, from existing .[ch] - -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. - -Send bug reports to ." - exit $? - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - -esac - -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te*) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru sbsigntool-0.6/src/coff/pe.h sbsigntool-0.9.2/src/coff/pe.h --- sbsigntool-0.6/src/coff/pe.h 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/src/coff/pe.h 2019-01-21 19:56:20.000000000 +0000 @@ -151,7 +151,7 @@ #define IMAGE_FILE_MACHINE_THUMB 0x01c2 #define IMAGE_FILE_MACHINE_TRICORE 0x0520 #define IMAGE_FILE_MACHINE_WCEMIPSV2 0x0169 -#define IMAGE_FILE_MACHINE_AMD64 0x8664 +#define IMAGE_FILE_MACHINE_AARCH64 0xaa64 #define IMAGE_SUBSYSTEM_UNKNOWN 0 #define IMAGE_SUBSYSTEM_NATIVE 1 diff -Nru sbsigntool-0.6/src/fileio.c sbsigntool-0.9.2/src/fileio.c --- sbsigntool-0.6/src/fileio.c 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/src/fileio.c 2019-01-21 19:56:20.000000000 +0000 @@ -39,6 +39,7 @@ #include #include #include +#include #include #include @@ -47,6 +48,55 @@ #define FLAG_NOERROR (1<<0) +static int ui_read(UI *ui, UI_STRING *uis) +{ + char password[128]; + + if (UI_get_string_type(uis) != UIT_PROMPT) + return 0; + + EVP_read_pw_string(password, sizeof(password), "Enter engine key pass phrase:", 0); + UI_set_result(ui, uis, password); + return 1; +} + +EVP_PKEY *fileio_read_engine_key(const char *engine, const char *filename) +{ + UI_METHOD *ui; + ENGINE *e; + EVP_PKEY *pkey = NULL; + + ENGINE_load_builtin_engines(); + e = ENGINE_by_id(engine); + + if (!e) { + fprintf(stderr, "Failed to load engine: %s\n", engine); + ERR_print_errors_fp(stderr); + return NULL; + } + + ui = UI_create_method("sbsigntools"); + if (!ui) { + fprintf(stderr, "Failed to create UI method\n"); + ERR_print_errors_fp(stderr); + goto out_free; + } + UI_method_set_reader(ui, ui_read); + + if (!ENGINE_init(e)) { + fprintf(stderr, "Failed to initialize engine %s\n", engine); + ERR_print_errors_fp(stderr); + goto out_free; + } + + pkey = ENGINE_load_private_key(e, filename, ui, NULL); + ENGINE_finish(e); + + out_free: + ENGINE_free(e); + return pkey; +} + EVP_PKEY *fileio_read_pkey(const char *filename) { EVP_PKEY *key = NULL; diff -Nru sbsigntool-0.6/src/fileio.h sbsigntool-0.9.2/src/fileio.h --- sbsigntool-0.6/src/fileio.h 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/src/fileio.h 2019-01-21 19:56:20.000000000 +0000 @@ -38,6 +38,7 @@ #include EVP_PKEY *fileio_read_pkey(const char *filename); +EVP_PKEY *fileio_read_engine_key(const char *engine, const char *filename); X509 *fileio_read_cert(const char *filename); int fileio_read_file(void *ctx, const char *filename, diff -Nru sbsigntool-0.6/src/image.c sbsigntool-0.9.2/src/image.c --- sbsigntool-0.6/src/image.c 2012-10-06 20:53:21.000000000 +0000 +++ sbsigntool-0.9.2/src/image.c 2019-01-21 19:56:20.000000000 +0000 @@ -38,6 +38,7 @@ #include #include +#include #include #include #include @@ -129,6 +130,70 @@ return 0; } +static int align_up(int size, int align) +{ + return (size + align - 1) & ~(align - 1); +} + +static uint16_t csum_update_fold(uint16_t csum, uint16_t x) +{ + uint32_t new = csum + x; + new = (new >> 16) + (new & 0xffff); + return new; +} + +static uint16_t csum_bytes(uint16_t checksum, void *buf, size_t len) +{ + unsigned int i; + uint16_t *p = buf; + + for (i = 0; i + sizeof(*p) <= len; i += sizeof(*p)) { + checksum = csum_update_fold(checksum, *p++); + } + + /* if length is odd, add the remaining byte */ + if (i < len) + checksum = csum_update_fold(checksum, *((uint8_t *)p)); + + return checksum; +} + +static void image_pecoff_update_checksum(struct image *image) +{ + bool is_signed = image->sigsize && image->sigbuf; + uint32_t checksum; + struct cert_table_header *cert_table = image->cert_table; + + /* We carefully only include the signature data in the checksum (and + * in the file length) if we're outputting the signature. Otherwise, + * in case of signature removal, the signature data is in the buffer + * we read in (as indicated by image->size), but we do *not* want to + * checksum it. + * + * We also skip the 32-bits of checksum data in the PE/COFF header. + */ + checksum = csum_bytes(0, image->buf, + (void *)image->checksum - (void *)image->buf); + checksum = csum_bytes(checksum, + image->checksum + 1, + (void *)(image->buf + image->data_size) - + (void *)(image->checksum + 1)); + + if (is_signed) { + checksum = csum_bytes(checksum, + cert_table, sizeof(*cert_table)); + + checksum = csum_bytes(checksum, image->sigbuf, image->sigsize); + } + + checksum += image->data_size; + + if (is_signed) + checksum += sizeof(*cert_table) + image->sigsize; + + *(image->checksum) = cpu_to_le32(checksum); +} + static int image_pecoff_parse(struct image *image) { struct cert_table_header *cert_table; @@ -175,13 +240,16 @@ image->opthdr.addr = image->pehdr + 1; magic = pehdr_u16(image->pehdr->f_magic); - if (magic == IMAGE_FILE_MACHINE_AMD64) { + switch (magic) { + case IMAGE_FILE_MACHINE_AMD64: + case IMAGE_FILE_MACHINE_AARCH64: rc = image_pecoff_parse_64(image); - - } else if (magic == IMAGE_FILE_MACHINE_I386) { + break; + case IMAGE_FILE_MACHINE_I386: + case IMAGE_FILE_MACHINE_THUMB: rc = image_pecoff_parse_32(image); - - } else { + break; + default: fprintf(stderr, "Invalid PE header magic\n"); return -1; } @@ -224,12 +292,12 @@ image->cert_table = cert_table; /* if we have a valid cert table header, populate sigbuf as a shadow - * copy of the cert table */ + * copy of the cert tables */ if (cert_table && cert_table->revision == CERT_TABLE_REVISION && cert_table->type == CERT_TABLE_TYPE_PKCS && cert_table->size < size) { - image->sigsize = cert_table->size; - image->sigbuf = talloc_memdup(image, cert_table + 1, + image->sigsize = image->data_dir_sigtable->size; + image->sigbuf = talloc_memdup(image, cert_table, image->sigsize); } @@ -239,11 +307,6 @@ return 0; } -static int align_up(int size, int align) -{ - return (size + align - 1) & ~(align - 1); -} - static int cmp_regions(const void *p1, const void *p2) { const struct region *r1 = p1, *r2 = p2; @@ -309,6 +372,7 @@ /* add COFF sections */ for (i = 0; i < image->sections; i++) { uint32_t file_offset, file_size; + int n; file_offset = pehdr_u32(image->scnhdr[i].s_scnptr); file_size = pehdr_u32(image->scnhdr[i].s_size); @@ -316,39 +380,38 @@ if (!file_size) continue; - image->n_checksum_regions++; + n = image->n_checksum_regions++; image->checksum_regions = talloc_realloc(image, image->checksum_regions, struct region, image->n_checksum_regions); regions = image->checksum_regions; - regions[i + 3].data = buf + file_offset; - regions[i + 3].size = align_up(file_size, - image->file_alignment); - regions[i + 3].name = talloc_strndup(image->checksum_regions, + regions[n].data = buf + file_offset; + regions[n].size = file_size; + regions[n].name = talloc_strndup(image->checksum_regions, image->scnhdr[i].s_name, 8); - bytes += regions[i + 3].size; + bytes += regions[n].size; - if (file_offset + regions[i+3].size > image->size) { + if (file_offset + regions[n].size > image->size) { fprintf(stderr, "warning: file-aligned section %s " "extends beyond end of file\n", - regions[i+3].name); + regions[n].name); } - if (regions[i+2].data + regions[i+2].size - != regions[i+3].data) { + if (regions[n-1].data + regions[n-1].size + != regions[n].data) { fprintf(stderr, "warning: gap in section table:\n"); fprintf(stderr, " %-8s: 0x%08tx - 0x%08tx,\n", - regions[i+2].name, - regions[i+2].data - buf, - regions[i+2].data + - regions[i+2].size - buf); + regions[n-1].name, + regions[n-1].data - buf, + regions[n-1].data + + regions[n-1].size - buf); fprintf(stderr, " %-8s: 0x%08tx - 0x%08tx,\n", - regions[i+3].name, - regions[i+3].data - buf, - regions[i+3].data + - regions[i+3].size - buf); + regions[n].name, + regions[n].data - buf, + regions[n].data + + regions[n].size - buf); gap_warn = 1; @@ -385,7 +448,13 @@ /* record the size of non-signature data */ r = &image->checksum_regions[image->n_checksum_regions - 1]; - image->data_size = (r->data - (void *)image->buf) + r->size; + /* + * The new Tianocore multisign does a stricter check of the signatures + * in particular, the signature table must start at an aligned offset + * fix this by adding bytes to the end of the text section (which must + * be included in the hash) + */ + image->data_size = align_up((r->data - (void *)image->buf) + r->size, 8); return 0; } @@ -401,6 +470,7 @@ return NULL; } + memset(image, 0, sizeof(*image)); rc = fileio_read_file(image, filename, &image->buf, &image->size); if (rc) goto err; @@ -475,53 +545,115 @@ int image_add_signature(struct image *image, void *sig, int size) { - /* we only support one signature at present */ + struct cert_table_header *cth; + int tot_size = size + sizeof(*cth); + int aligned_size = align_up(tot_size, 8); + void *start; + if (image->sigbuf) { - fprintf(stderr, "warning: overwriting existing signature\n"); - talloc_free(image->sigbuf); + fprintf(stderr, "Image was already signed; adding additional signature\n"); + image->sigbuf = talloc_realloc(image, image->sigbuf, uint8_t, + image->sigsize + aligned_size); + start = image->sigbuf + image->sigsize; + image->sigsize += aligned_size; + } else { + fprintf(stderr, "Signing Unsigned original image\n"); + start = image->sigbuf = talloc_array(image, uint8_t, aligned_size); + image->sigsize = aligned_size; + } + cth = start; + start += sizeof(*cth); + memset(cth, 0 , sizeof(*cth)); + cth->size = tot_size; + cth->revision = CERT_TABLE_REVISION; + cth->type = CERT_TABLE_TYPE_PKCS; + memcpy(start, sig, size); + if (aligned_size != tot_size) + memset(start + size, 0, aligned_size - tot_size); + + image->cert_table = cth; + + return 0; +} + +int image_get_signature(struct image *image, int signum, + uint8_t **buf, size_t *size) +{ + struct cert_table_header *header; + void *addr = (void *)image->sigbuf; + int i; + + if (!image->sigbuf) { + fprintf(stderr, "No signature table present\n"); + return -1; + } + + header = addr; + for (i = 0; i < signum; i++) { + addr += align_up(header->size, 8); + header = addr; } - image->sigbuf = sig; - image->sigsize = size; + if (addr >= ((void *)image->sigbuf + + image->sigsize)) + return -1; + + *buf = (void *)(header + 1); + *size = header->size - sizeof(*header); return 0; } -void image_remove_signature(struct image *image) +int image_remove_signature(struct image *image, int signum) { - if (image->sigbuf) - talloc_free(image->sigbuf); - image->sigbuf = NULL; - image->sigsize = 0; + uint8_t *buf; + size_t size, aligned_size; + int rc = image_get_signature(image, signum, &buf, &size); + + if (rc) + return rc; + + buf -= sizeof(struct cert_table_header); + size += sizeof(struct cert_table_header); + aligned_size = align_up(size, 8); + + /* is signature at the end? */ + if (buf + aligned_size >= (uint8_t *)image->sigbuf + image->sigsize) { + /* only one signature? */ + if (image->sigbuf == buf) { + talloc_free(image->sigbuf); + image->sigbuf = NULL; + image->sigsize = 0; + return 0; + } + } else { + /* sig is in the middle ... just copy the rest over it */ + memmove(buf, buf + aligned_size, image->sigsize - + ((void *)buf - image->sigbuf) - aligned_size); + } + image->sigsize -= aligned_size; + image->sigbuf = talloc_realloc(image, image->sigbuf, uint8_t, + image->sigsize); + return 0; + } int image_write(struct image *image, const char *filename) { - struct cert_table_header cert_table_header; - int fd, rc, len, padlen; + int fd, rc; bool is_signed; - uint8_t pad[8]; is_signed = image->sigbuf && image->sigsize; - padlen = 0; /* optionally update the image to contain signature data */ if (is_signed) { - cert_table_header.size = image->sigsize + - sizeof(cert_table_header); - cert_table_header.revision = CERT_TABLE_REVISION; - cert_table_header.type = CERT_TABLE_TYPE_PKCS; - - len = sizeof(cert_table_header) + image->sigsize; - - /* pad to sizeof(pad)-byte boundary */ - padlen = align_up(len, sizeof(pad)) - len; - image->data_dir_sigtable->addr = image->data_size; - image->data_dir_sigtable->size = len + padlen; + image->data_dir_sigtable->size = image->sigsize; } else { image->data_dir_sigtable->addr = 0; image->data_dir_sigtable->size = 0; } + image_pecoff_update_checksum(image); + fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, 0644); if (fd < 0) { perror("open"); @@ -534,25 +666,24 @@ if (!is_signed) goto out; - rc = write_all(fd, &cert_table_header, sizeof(cert_table_header)); - if (!rc) - goto out; - rc = write_all(fd, image->sigbuf, image->sigsize); if (!rc) goto out; - if (padlen) { - memset(pad, 0, sizeof(pad)); - rc = write_all(fd, pad, padlen); - } - out: close(fd); return !rc; } -int image_write_detached(struct image *image, const char *filename) +int image_write_detached(struct image *image, int signum, const char *filename) { - return fileio_write_file(filename, image->sigbuf, image->sigsize); + uint8_t *sig; + size_t len; + int rc; + + rc = image_get_signature(image, signum, &sig, &len); + + if (rc) + return rc; + return fileio_write_file(filename, sig, len); } diff -Nru sbsigntool-0.6/src/image.h sbsigntool-0.9.2/src/image.h --- sbsigntool-0.6/src/image.h 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/src/image.h 2019-01-21 19:56:20.000000000 +0000 @@ -107,9 +107,11 @@ int image_hash_sha256(struct image *image, uint8_t digest[]); int image_add_signature(struct image *, void *sig, int size); -void image_remove_signature(struct image *image); +int image_get_signature(struct image *image, int signum, + uint8_t **buf, size_t *size); +int image_remove_signature(struct image *image, int signum); int image_write(struct image *image, const char *filename); -int image_write_detached(struct image *image, const char *filename); +int image_write_detached(struct image *image, int signum, const char *filename); #endif /* IMAGE_H */ diff -Nru sbsigntool-0.6/src/libcoff.h sbsigntool-0.9.2/src/libcoff.h --- sbsigntool-0.6/src/libcoff.h 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/src/libcoff.h 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,958 @@ +/* DO NOT EDIT! -*- buffer-read-only: t -*- This file is automatically + generated from "libcoff-in.h" and "coffcode.h". + Run "make headers" in your build bfd/ to regenerate. */ + +/* BFD COFF object file private structure. + Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, + 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 + Free Software Foundation, Inc. + Written by Cygnus Support. + + This file is part of BFD, the Binary File Descriptor library. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, + MA 02110-1301, USA. */ + +#include "bfdlink.h" + +/* Object file tdata; access macros. */ + +#define coff_data(bfd) ((bfd)->tdata.coff_obj_data) +#define obj_pe(bfd) (coff_data (bfd)->pe) +#define obj_symbols(bfd) (coff_data (bfd)->symbols) +#define obj_sym_filepos(bfd) (coff_data (bfd)->sym_filepos) +#define obj_relocbase(bfd) (coff_data (bfd)->relocbase) +#define obj_raw_syments(bfd) (coff_data (bfd)->raw_syments) +#define obj_raw_syment_count(bfd) (coff_data (bfd)->raw_syment_count) +#define obj_convert(bfd) (coff_data (bfd)->conversion_table) +#define obj_conv_table_size(bfd) (coff_data (bfd)->conv_table_size) +#define obj_coff_external_syms(bfd) (coff_data (bfd)->external_syms) +#define obj_coff_keep_syms(bfd) (coff_data (bfd)->keep_syms) +#define obj_coff_strings(bfd) (coff_data (bfd)->strings) +#define obj_coff_keep_strings(bfd) (coff_data (bfd)->keep_strings) +#define obj_coff_sym_hashes(bfd) (coff_data (bfd)->sym_hashes) +#define obj_coff_strings_written(bfd) (coff_data (bfd)->strings_written) +#define obj_coff_local_toc_table(bfd) (coff_data (bfd)->local_toc_sym_map) + +/* `Tdata' information kept for COFF files. */ + +typedef struct coff_tdata +{ + struct coff_symbol_struct *symbols; /* Symtab for input bfd. */ + unsigned int *conversion_table; + int conv_table_size; + file_ptr sym_filepos; + + struct coff_ptr_struct *raw_syments; + unsigned long raw_syment_count; + + /* These are only valid once writing has begun. */ + long int relocbase; + + /* These members communicate important constants about the symbol table + to GDB's symbol-reading code. These `constants' unfortunately vary + from coff implementation to implementation... */ + unsigned local_n_btmask; + unsigned local_n_btshft; + unsigned local_n_tmask; + unsigned local_n_tshift; + unsigned local_symesz; + unsigned local_auxesz; + unsigned local_linesz; + + /* The unswapped external symbols. May be NULL. Read by + _bfd_coff_get_external_symbols. */ + void * external_syms; + /* If this is TRUE, the external_syms may not be freed. */ + bfd_boolean keep_syms; + + /* The string table. May be NULL. Read by + _bfd_coff_read_string_table. */ + char *strings; + /* If this is TRUE, the strings may not be freed. */ + bfd_boolean keep_strings; + /* If this is TRUE, the strings have been written out already. */ + bfd_boolean strings_written; + + /* Is this a PE format coff file? */ + int pe; + /* Used by the COFF backend linker. */ + struct coff_link_hash_entry **sym_hashes; + + /* Used by the pe linker for PowerPC. */ + int *local_toc_sym_map; + + struct bfd_link_info *link_info; + + /* Used by coff_find_nearest_line. */ + void * line_info; + + /* A place to stash dwarf2 info for this bfd. */ + void * dwarf2_find_line_info; + + /* The timestamp from the COFF file header. */ + long timestamp; + + /* Copy of some of the f_flags bits in the COFF filehdr structure, + used by ARM code. */ + flagword flags; + + /* coff-stgo32 EXE stub header after BFD tdata has been allocated. Its data + is kept in internal_filehdr.go32stub beforehand. */ + char *go32stub; +} coff_data_type; + +/* Tdata for pe image files. */ +typedef struct pe_tdata +{ + coff_data_type coff; + struct internal_extra_pe_aouthdr pe_opthdr; + int dll; + int has_reloc_section; + int dont_strip_reloc; + bfd_boolean (*in_reloc_p) (bfd *, reloc_howto_type *); + flagword real_flags; +} pe_data_type; + +#define pe_data(bfd) ((bfd)->tdata.pe_obj_data) + +/* Tdata for XCOFF files. */ + +struct xcoff_tdata +{ + /* Basic COFF information. */ + coff_data_type coff; + + /* TRUE if this is an XCOFF64 file. */ + bfd_boolean xcoff64; + + /* TRUE if a large a.out header should be generated. */ + bfd_boolean full_aouthdr; + + /* TOC value. */ + bfd_vma toc; + + /* Index of section holding TOC. */ + int sntoc; + + /* Index of section holding entry point. */ + int snentry; + + /* .text alignment from optional header. */ + int text_align_power; + + /* .data alignment from optional header. */ + int data_align_power; + + /* modtype from optional header. */ + short modtype; + + /* cputype from optional header. */ + short cputype; + + /* maxdata from optional header. */ + bfd_vma maxdata; + + /* maxstack from optional header. */ + bfd_vma maxstack; + + /* Used by the XCOFF backend linker. */ + asection **csects; + long *debug_indices; + unsigned int *lineno_counts; + unsigned int import_file_id; +}; + +#define xcoff_data(abfd) ((abfd)->tdata.xcoff_obj_data) + +/* We take the address of the first element of an asymbol to ensure that the + macro is only ever applied to an asymbol. */ +#define coffsymbol(asymbol) ((coff_symbol_type *)(&((asymbol)->the_bfd))) + +/* The used_by_bfd field of a section may be set to a pointer to this + structure. */ + +struct coff_section_tdata +{ + /* The relocs, swapped into COFF internal form. This may be NULL. */ + struct internal_reloc *relocs; + /* If this is TRUE, the relocs entry may not be freed. */ + bfd_boolean keep_relocs; + /* The section contents. This may be NULL. */ + bfd_byte *contents; + /* If this is TRUE, the contents entry may not be freed. */ + bfd_boolean keep_contents; + /* Information cached by coff_find_nearest_line. */ + bfd_vma offset; + unsigned int i; + const char *function; + /* Optional information about a COMDAT entry; NULL if not COMDAT. */ + struct coff_comdat_info *comdat; + int line_base; + /* A pointer used for .stab linking optimizations. */ + void * stab_info; + /* Available for individual backends. */ + void * tdata; +}; + +/* An accessor macro for the coff_section_tdata structure. */ +#define coff_section_data(abfd, sec) \ + ((struct coff_section_tdata *) (sec)->used_by_bfd) + +/* Tdata for sections in XCOFF files. This is used by the linker. */ + +struct xcoff_section_tdata +{ + /* Used for XCOFF csects created by the linker; points to the real + XCOFF section which contains this csect. */ + asection *enclosing; + /* The lineno_count field for the enclosing section, because we are + going to clobber it there. */ + unsigned int lineno_count; + /* The first and last symbol indices for symbols used by this csect. */ + unsigned long first_symndx; + unsigned long last_symndx; +}; + +/* An accessor macro the xcoff_section_tdata structure. */ +#define xcoff_section_data(abfd, sec) \ + ((struct xcoff_section_tdata *) coff_section_data ((abfd), (sec))->tdata) + +/* Tdata for sections in PE files. */ + +struct pei_section_tdata +{ + /* The virtual size of the section. */ + bfd_size_type virt_size; + /* The PE section flags. */ + long pe_flags; +}; + +/* An accessor macro for the pei_section_tdata structure. */ +#define pei_section_data(abfd, sec) \ + ((struct pei_section_tdata *) coff_section_data ((abfd), (sec))->tdata) + +/* COFF linker hash table entries. */ + +struct coff_link_hash_entry +{ + struct bfd_link_hash_entry root; + + /* Symbol index in output file. Set to -1 initially. Set to -2 if + there is a reloc against this symbol. */ + long indx; + + /* Symbol type. */ + unsigned short type; + + /* Symbol class. */ + unsigned char symbol_class; + + /* Number of auxiliary entries. */ + char numaux; + + /* BFD to take auxiliary entries from. */ + bfd *auxbfd; + + /* Pointer to array of auxiliary entries, if any. */ + union internal_auxent *aux; + + /* Flag word; legal values follow. */ + unsigned short coff_link_hash_flags; + /* Symbol is a PE section symbol. */ +#define COFF_LINK_HASH_PE_SECTION_SYMBOL (01) +}; + +/* COFF linker hash table. */ + +struct coff_link_hash_table +{ + struct bfd_link_hash_table root; + /* A pointer to information used to link stabs in sections. */ + struct stab_info stab_info; +}; + +/* Look up an entry in a COFF linker hash table. */ + +#define coff_link_hash_lookup(table, string, create, copy, follow) \ + ((struct coff_link_hash_entry *) \ + bfd_link_hash_lookup (&(table)->root, (string), (create), \ + (copy), (follow))) + +/* Traverse a COFF linker hash table. */ + +#define coff_link_hash_traverse(table, func, info) \ + (bfd_link_hash_traverse \ + (&(table)->root, \ + (bfd_boolean (*) (struct bfd_link_hash_entry *, void *)) (func), \ + (info))) + +/* Get the COFF linker hash table from a link_info structure. */ + +#define coff_hash_table(p) ((struct coff_link_hash_table *) ((p)->hash)) + +/* Functions in coffgen.c. */ +extern const bfd_target *coff_object_p + (bfd *); +extern struct bfd_section *coff_section_from_bfd_index + (bfd *, int); +extern long coff_get_symtab_upper_bound + (bfd *); +extern long coff_canonicalize_symtab + (bfd *, asymbol **); +extern int coff_count_linenumbers + (bfd *); +extern struct coff_symbol_struct *coff_symbol_from + (bfd *, asymbol *); +extern bfd_boolean coff_renumber_symbols + (bfd *, int *); +extern void coff_mangle_symbols + (bfd *); +extern bfd_boolean coff_write_symbols + (bfd *); +extern bfd_boolean coff_write_linenumbers + (bfd *); +extern alent *coff_get_lineno + (bfd *, asymbol *); +extern asymbol *coff_section_symbol + (bfd *, char *); +extern bfd_boolean _bfd_coff_get_external_symbols + (bfd *); +extern const char *_bfd_coff_read_string_table + (bfd *); +extern bfd_boolean _bfd_coff_free_symbols + (bfd *); +extern struct coff_ptr_struct *coff_get_normalized_symtab + (bfd *); +extern long coff_get_reloc_upper_bound + (bfd *, sec_ptr); +extern asymbol *coff_make_empty_symbol + (bfd *); +extern void coff_print_symbol + (bfd *, void * filep, asymbol *, bfd_print_symbol_type); +extern void coff_get_symbol_info + (bfd *, asymbol *, symbol_info *ret); +extern bfd_boolean _bfd_coff_is_local_label_name + (bfd *, const char *); +extern asymbol *coff_bfd_make_debug_symbol + (bfd *, void *, unsigned long); +extern bfd_boolean coff_find_nearest_line + (bfd *, asection *, asymbol **, bfd_vma, const char **, + const char **, unsigned int *); +extern bfd_boolean coff_find_inliner_info + (bfd *, const char **, const char **, unsigned int *); +extern int coff_sizeof_headers + (bfd *, struct bfd_link_info *); +extern bfd_boolean bfd_coff_reloc16_relax_section + (bfd *, asection *, struct bfd_link_info *, bfd_boolean *); +extern bfd_byte *bfd_coff_reloc16_get_relocated_section_contents + (bfd *, struct bfd_link_info *, struct bfd_link_order *, + bfd_byte *, bfd_boolean, asymbol **); +extern bfd_vma bfd_coff_reloc16_get_value + (arelent *, struct bfd_link_info *, asection *); +extern void bfd_perform_slip + (bfd *, unsigned int, asection *, bfd_vma); + +/* Functions and types in cofflink.c. */ + +#define STRING_SIZE_SIZE 4 + +/* We use a hash table to merge identical enum, struct, and union + definitions in the linker. */ + +/* Information we keep for a single element (an enum value, a + structure or union field) in the debug merge hash table. */ + +struct coff_debug_merge_element +{ + /* Next element. */ + struct coff_debug_merge_element *next; + + /* Name. */ + const char *name; + + /* Type. */ + unsigned int type; + + /* Symbol index for complex type. */ + long tagndx; +}; + +/* A linked list of debug merge entries for a given name. */ + +struct coff_debug_merge_type +{ + /* Next type with the same name. */ + struct coff_debug_merge_type *next; + + /* Class of type. */ + int type_class; + + /* Symbol index where this type is defined. */ + long indx; + + /* List of elements. */ + struct coff_debug_merge_element *elements; +}; + +/* Information we store in the debug merge hash table. */ + +struct coff_debug_merge_hash_entry +{ + struct bfd_hash_entry root; + + /* A list of types with this name. */ + struct coff_debug_merge_type *types; +}; + +/* The debug merge hash table. */ + +struct coff_debug_merge_hash_table +{ + struct bfd_hash_table root; +}; + +/* Initialize a COFF debug merge hash table. */ + +#define coff_debug_merge_hash_table_init(table) \ + (bfd_hash_table_init (&(table)->root, _bfd_coff_debug_merge_hash_newfunc, \ + sizeof (struct coff_debug_merge_hash_entry))) + +/* Free a COFF debug merge hash table. */ + +#define coff_debug_merge_hash_table_free(table) \ + (bfd_hash_table_free (&(table)->root)) + +/* Look up an entry in a COFF debug merge hash table. */ + +#define coff_debug_merge_hash_lookup(table, string, create, copy) \ + ((struct coff_debug_merge_hash_entry *) \ + bfd_hash_lookup (&(table)->root, (string), (create), (copy))) + +/* Information we keep for each section in the output file when doing + a relocatable link. */ + +struct coff_link_section_info +{ + /* The relocs to be output. */ + struct internal_reloc *relocs; + /* For each reloc against a global symbol whose index was not known + when the reloc was handled, the global hash table entry. */ + struct coff_link_hash_entry **rel_hashes; +}; + +/* Information that we pass around while doing the final link step. */ + +struct coff_final_link_info +{ + /* General link information. */ + struct bfd_link_info *info; + /* Output BFD. */ + bfd *output_bfd; + /* Used to indicate failure in traversal routine. */ + bfd_boolean failed; + /* If doing "task linking" set only during the time when we want the + global symbol writer to convert the storage class of defined global + symbols from global to static. */ + bfd_boolean global_to_static; + /* Hash table for long symbol names. */ + struct bfd_strtab_hash *strtab; + /* When doing a relocatable link, an array of information kept for + each output section, indexed by the target_index field. */ + struct coff_link_section_info *section_info; + /* Symbol index of last C_FILE symbol (-1 if none). */ + long last_file_index; + /* Contents of last C_FILE symbol. */ + struct internal_syment last_file; + /* Symbol index of first aux entry of last .bf symbol with an empty + endndx field (-1 if none). */ + long last_bf_index; + /* Contents of last_bf_index aux entry. */ + union internal_auxent last_bf; + /* Hash table used to merge debug information. */ + struct coff_debug_merge_hash_table debug_merge; + /* Buffer large enough to hold swapped symbols of any input file. */ + struct internal_syment *internal_syms; + /* Buffer large enough to hold sections of symbols of any input file. */ + asection **sec_ptrs; + /* Buffer large enough to hold output indices of symbols of any + input file. */ + long *sym_indices; + /* Buffer large enough to hold output symbols for any input file. */ + bfd_byte *outsyms; + /* Buffer large enough to hold external line numbers for any input + section. */ + bfd_byte *linenos; + /* Buffer large enough to hold any input section. */ + bfd_byte *contents; + /* Buffer large enough to hold external relocs of any input section. */ + bfd_byte *external_relocs; + /* Buffer large enough to hold swapped relocs of any input section. */ + struct internal_reloc *internal_relocs; +}; + +/* Most COFF variants have no way to record the alignment of a + section. This struct is used to set a specific alignment based on + the name of the section. */ + +struct coff_section_alignment_entry +{ + /* The section name. */ + const char *name; + + /* This is either (unsigned int) -1, indicating that the section + name must match exactly, or it is the number of letters which + must match at the start of the name. */ + unsigned int comparison_length; + + /* These macros may be used to fill in the first two fields in a + structure initialization. */ +#define COFF_SECTION_NAME_EXACT_MATCH(name) (name), ((unsigned int) -1) +#define COFF_SECTION_NAME_PARTIAL_MATCH(name) (name), (sizeof (name) - 1) + + /* Only use this entry if the default section alignment for this + target is at least that much (as a power of two). If this field + is COFF_ALIGNMENT_FIELD_EMPTY, it should be ignored. */ + unsigned int default_alignment_min; + + /* Only use this entry if the default section alignment for this + target is no greater than this (as a power of two). If this + field is COFF_ALIGNMENT_FIELD_EMPTY, it should be ignored. */ + unsigned int default_alignment_max; + +#define COFF_ALIGNMENT_FIELD_EMPTY ((unsigned int) -1) + + /* The desired alignment for this section (as a power of two). */ + unsigned int alignment_power; +}; + +extern struct bfd_hash_entry *_bfd_coff_link_hash_newfunc + (struct bfd_hash_entry *, struct bfd_hash_table *, const char *); +extern bfd_boolean _bfd_coff_link_hash_table_init + (struct coff_link_hash_table *, bfd *, + struct bfd_hash_entry *(*) (struct bfd_hash_entry *, + struct bfd_hash_table *, + const char *), + unsigned int); +extern struct bfd_link_hash_table *_bfd_coff_link_hash_table_create + (bfd *); +extern const char *_bfd_coff_internal_syment_name + (bfd *, const struct internal_syment *, char *); +extern bfd_boolean _bfd_coff_section_already_linked + (bfd *, asection *, struct bfd_link_info *); +extern bfd_boolean _bfd_coff_link_add_symbols + (bfd *, struct bfd_link_info *); +extern bfd_boolean _bfd_coff_final_link + (bfd *, struct bfd_link_info *); +extern struct internal_reloc *_bfd_coff_read_internal_relocs + (bfd *, asection *, bfd_boolean, bfd_byte *, bfd_boolean, + struct internal_reloc *); +extern bfd_boolean _bfd_coff_generic_relocate_section + (bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *, + struct internal_reloc *, struct internal_syment *, asection **); +extern struct bfd_hash_entry *_bfd_coff_debug_merge_hash_newfunc + (struct bfd_hash_entry *, struct bfd_hash_table *, const char *); +extern bfd_boolean _bfd_coff_write_global_sym + (struct bfd_hash_entry *, void *); +extern bfd_boolean _bfd_coff_write_task_globals + (struct coff_link_hash_entry *, void *); +extern bfd_boolean _bfd_coff_link_input_bfd + (struct coff_final_link_info *, bfd *); +extern bfd_boolean _bfd_coff_reloc_link_order + (bfd *, struct coff_final_link_info *, asection *, + struct bfd_link_order *); + + +#define coff_get_section_contents_in_window \ + _bfd_generic_get_section_contents_in_window + +/* Functions in xcofflink.c. */ + +extern long _bfd_xcoff_get_dynamic_symtab_upper_bound + (bfd *); +extern long _bfd_xcoff_canonicalize_dynamic_symtab + (bfd *, asymbol **); +extern long _bfd_xcoff_get_dynamic_reloc_upper_bound + (bfd *); +extern long _bfd_xcoff_canonicalize_dynamic_reloc + (bfd *, arelent **, asymbol **); +extern struct bfd_link_hash_table *_bfd_xcoff_bfd_link_hash_table_create + (bfd *); +extern void _bfd_xcoff_bfd_link_hash_table_free + (struct bfd_link_hash_table *); +extern bfd_boolean _bfd_xcoff_bfd_link_add_symbols + (bfd *, struct bfd_link_info *); +extern bfd_boolean _bfd_xcoff_bfd_final_link + (bfd *, struct bfd_link_info *); +extern bfd_boolean _bfd_xcoff_define_common_symbol + (bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *); +extern bfd_boolean _bfd_ppc_xcoff_relocate_section + (bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *, + struct internal_reloc *, struct internal_syment *, asection **); + +/* Functions in coff-ppc.c. FIXME: These are called by pe.em in the + linker, and so should start with bfd and be declared in bfd.h. */ + +extern bfd_boolean ppc_allocate_toc_section + (struct bfd_link_info *); +extern bfd_boolean ppc_process_before_allocation + (bfd *, struct bfd_link_info *); +/* Extracted from coffcode.h. */ +typedef struct coff_ptr_struct +{ + /* Remembers the offset from the first symbol in the file for + this symbol. Generated by coff_renumber_symbols. */ + unsigned int offset; + + /* Should the value of this symbol be renumbered. Used for + XCOFF C_BSTAT symbols. Set by coff_slurp_symbol_table. */ + unsigned int fix_value : 1; + + /* Should the tag field of this symbol be renumbered. + Created by coff_pointerize_aux. */ + unsigned int fix_tag : 1; + + /* Should the endidx field of this symbol be renumbered. + Created by coff_pointerize_aux. */ + unsigned int fix_end : 1; + + /* Should the x_csect.x_scnlen field be renumbered. + Created by coff_pointerize_aux. */ + unsigned int fix_scnlen : 1; + + /* Fix up an XCOFF C_BINCL/C_EINCL symbol. The value is the + index into the line number entries. Set by coff_slurp_symbol_table. */ + unsigned int fix_line : 1; + + /* The container for the symbol structure as read and translated + from the file. */ + union + { + union internal_auxent auxent; + struct internal_syment syment; + } u; +} combined_entry_type; + + +/* Each canonical asymbol really looks like this: */ + +typedef struct coff_symbol_struct +{ + /* The actual symbol which the rest of BFD works with */ + asymbol symbol; + + /* A pointer to the hidden information for this symbol */ + combined_entry_type *native; + + /* A pointer to the linenumber information for this symbol */ + struct lineno_cache_entry *lineno; + + /* Have the line numbers been relocated yet ? */ + bfd_boolean done_lineno; +} coff_symbol_type; +/* COFF symbol classifications. */ + +enum coff_symbol_classification +{ + /* Global symbol. */ + COFF_SYMBOL_GLOBAL, + /* Common symbol. */ + COFF_SYMBOL_COMMON, + /* Undefined symbol. */ + COFF_SYMBOL_UNDEFINED, + /* Local symbol. */ + COFF_SYMBOL_LOCAL, + /* PE section symbol. */ + COFF_SYMBOL_PE_SECTION +}; + +typedef struct +{ + void (*_bfd_coff_swap_aux_in) + (bfd *, void *, int, int, int, int, void *); + + void (*_bfd_coff_swap_sym_in) + (bfd *, void *, void *); + + void (*_bfd_coff_swap_lineno_in) + (bfd *, void *, void *); + + unsigned int (*_bfd_coff_swap_aux_out) + (bfd *, void *, int, int, int, int, void *); + + unsigned int (*_bfd_coff_swap_sym_out) + (bfd *, void *, void *); + + unsigned int (*_bfd_coff_swap_lineno_out) + (bfd *, void *, void *); + + unsigned int (*_bfd_coff_swap_reloc_out) + (bfd *, void *, void *); + + unsigned int (*_bfd_coff_swap_filehdr_out) + (bfd *, void *, void *); + + unsigned int (*_bfd_coff_swap_aouthdr_out) + (bfd *, void *, void *); + + unsigned int (*_bfd_coff_swap_scnhdr_out) + (bfd *, void *, void *); + + unsigned int _bfd_filhsz; + unsigned int _bfd_aoutsz; + unsigned int _bfd_scnhsz; + unsigned int _bfd_symesz; + unsigned int _bfd_auxesz; + unsigned int _bfd_relsz; + unsigned int _bfd_linesz; + unsigned int _bfd_filnmlen; + bfd_boolean _bfd_coff_long_filenames; + + bfd_boolean _bfd_coff_long_section_names; + bfd_boolean (*_bfd_coff_set_long_section_names) + (bfd *, int); + + unsigned int _bfd_coff_default_section_alignment_power; + bfd_boolean _bfd_coff_force_symnames_in_strings; + unsigned int _bfd_coff_debug_string_prefix_length; + + void (*_bfd_coff_swap_filehdr_in) + (bfd *, void *, void *); + + void (*_bfd_coff_swap_aouthdr_in) + (bfd *, void *, void *); + + void (*_bfd_coff_swap_scnhdr_in) + (bfd *, void *, void *); + + void (*_bfd_coff_swap_reloc_in) + (bfd *abfd, void *, void *); + + bfd_boolean (*_bfd_coff_bad_format_hook) + (bfd *, void *); + + bfd_boolean (*_bfd_coff_set_arch_mach_hook) + (bfd *, void *); + + void * (*_bfd_coff_mkobject_hook) + (bfd *, void *, void *); + + bfd_boolean (*_bfd_styp_to_sec_flags_hook) + (bfd *, void *, const char *, asection *, flagword *); + + void (*_bfd_set_alignment_hook) + (bfd *, asection *, void *); + + bfd_boolean (*_bfd_coff_slurp_symbol_table) + (bfd *); + + bfd_boolean (*_bfd_coff_symname_in_debug) + (bfd *, struct internal_syment *); + + bfd_boolean (*_bfd_coff_pointerize_aux_hook) + (bfd *, combined_entry_type *, combined_entry_type *, + unsigned int, combined_entry_type *); + + bfd_boolean (*_bfd_coff_print_aux) + (bfd *, FILE *, combined_entry_type *, combined_entry_type *, + combined_entry_type *, unsigned int); + + void (*_bfd_coff_reloc16_extra_cases) + (bfd *, struct bfd_link_info *, struct bfd_link_order *, arelent *, + bfd_byte *, unsigned int *, unsigned int *); + + int (*_bfd_coff_reloc16_estimate) + (bfd *, asection *, arelent *, unsigned int, + struct bfd_link_info *); + + enum coff_symbol_classification (*_bfd_coff_classify_symbol) + (bfd *, struct internal_syment *); + + bfd_boolean (*_bfd_coff_compute_section_file_positions) + (bfd *); + + bfd_boolean (*_bfd_coff_start_final_link) + (bfd *, struct bfd_link_info *); + + bfd_boolean (*_bfd_coff_relocate_section) + (bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *, + struct internal_reloc *, struct internal_syment *, asection **); + + reloc_howto_type *(*_bfd_coff_rtype_to_howto) + (bfd *, asection *, struct internal_reloc *, + struct coff_link_hash_entry *, struct internal_syment *, + bfd_vma *); + + bfd_boolean (*_bfd_coff_adjust_symndx) + (bfd *, struct bfd_link_info *, bfd *, asection *, + struct internal_reloc *, bfd_boolean *); + + bfd_boolean (*_bfd_coff_link_add_one_symbol) + (struct bfd_link_info *, bfd *, const char *, flagword, + asection *, bfd_vma, const char *, bfd_boolean, bfd_boolean, + struct bfd_link_hash_entry **); + + bfd_boolean (*_bfd_coff_link_output_has_begun) + (bfd *, struct coff_final_link_info *); + + bfd_boolean (*_bfd_coff_final_link_postscript) + (bfd *, struct coff_final_link_info *); + + bfd_boolean (*_bfd_coff_print_pdata) + (bfd *, void *); + +} bfd_coff_backend_data; + +#define coff_backend_info(abfd) \ + ((bfd_coff_backend_data *) (abfd)->xvec->backend_data) + +#define bfd_coff_swap_aux_in(a,e,t,c,ind,num,i) \ + ((coff_backend_info (a)->_bfd_coff_swap_aux_in) (a,e,t,c,ind,num,i)) + +#define bfd_coff_swap_sym_in(a,e,i) \ + ((coff_backend_info (a)->_bfd_coff_swap_sym_in) (a,e,i)) + +#define bfd_coff_swap_lineno_in(a,e,i) \ + ((coff_backend_info ( a)->_bfd_coff_swap_lineno_in) (a,e,i)) + +#define bfd_coff_swap_reloc_out(abfd, i, o) \ + ((coff_backend_info (abfd)->_bfd_coff_swap_reloc_out) (abfd, i, o)) + +#define bfd_coff_swap_lineno_out(abfd, i, o) \ + ((coff_backend_info (abfd)->_bfd_coff_swap_lineno_out) (abfd, i, o)) + +#define bfd_coff_swap_aux_out(a,i,t,c,ind,num,o) \ + ((coff_backend_info (a)->_bfd_coff_swap_aux_out) (a,i,t,c,ind,num,o)) + +#define bfd_coff_swap_sym_out(abfd, i,o) \ + ((coff_backend_info (abfd)->_bfd_coff_swap_sym_out) (abfd, i, o)) + +#define bfd_coff_swap_scnhdr_out(abfd, i,o) \ + ((coff_backend_info (abfd)->_bfd_coff_swap_scnhdr_out) (abfd, i, o)) + +#define bfd_coff_swap_filehdr_out(abfd, i,o) \ + ((coff_backend_info (abfd)->_bfd_coff_swap_filehdr_out) (abfd, i, o)) + +#define bfd_coff_swap_aouthdr_out(abfd, i,o) \ + ((coff_backend_info (abfd)->_bfd_coff_swap_aouthdr_out) (abfd, i, o)) + +#define bfd_coff_filhsz(abfd) (coff_backend_info (abfd)->_bfd_filhsz) +#define bfd_coff_aoutsz(abfd) (coff_backend_info (abfd)->_bfd_aoutsz) +#define bfd_coff_scnhsz(abfd) (coff_backend_info (abfd)->_bfd_scnhsz) +#define bfd_coff_symesz(abfd) (coff_backend_info (abfd)->_bfd_symesz) +#define bfd_coff_auxesz(abfd) (coff_backend_info (abfd)->_bfd_auxesz) +#define bfd_coff_relsz(abfd) (coff_backend_info (abfd)->_bfd_relsz) +#define bfd_coff_linesz(abfd) (coff_backend_info (abfd)->_bfd_linesz) +#define bfd_coff_filnmlen(abfd) (coff_backend_info (abfd)->_bfd_filnmlen) +#define bfd_coff_long_filenames(abfd) \ + (coff_backend_info (abfd)->_bfd_coff_long_filenames) +#define bfd_coff_long_section_names(abfd) \ + (coff_backend_info (abfd)->_bfd_coff_long_section_names) +#define bfd_coff_set_long_section_names(abfd, enable) \ + ((coff_backend_info (abfd)->_bfd_coff_set_long_section_names) (abfd, enable)) +#define bfd_coff_default_section_alignment_power(abfd) \ + (coff_backend_info (abfd)->_bfd_coff_default_section_alignment_power) +#define bfd_coff_swap_filehdr_in(abfd, i,o) \ + ((coff_backend_info (abfd)->_bfd_coff_swap_filehdr_in) (abfd, i, o)) + +#define bfd_coff_swap_aouthdr_in(abfd, i,o) \ + ((coff_backend_info (abfd)->_bfd_coff_swap_aouthdr_in) (abfd, i, o)) + +#define bfd_coff_swap_scnhdr_in(abfd, i,o) \ + ((coff_backend_info (abfd)->_bfd_coff_swap_scnhdr_in) (abfd, i, o)) + +#define bfd_coff_swap_reloc_in(abfd, i, o) \ + ((coff_backend_info (abfd)->_bfd_coff_swap_reloc_in) (abfd, i, o)) + +#define bfd_coff_bad_format_hook(abfd, filehdr) \ + ((coff_backend_info (abfd)->_bfd_coff_bad_format_hook) (abfd, filehdr)) + +#define bfd_coff_set_arch_mach_hook(abfd, filehdr)\ + ((coff_backend_info (abfd)->_bfd_coff_set_arch_mach_hook) (abfd, filehdr)) +#define bfd_coff_mkobject_hook(abfd, filehdr, aouthdr)\ + ((coff_backend_info (abfd)->_bfd_coff_mkobject_hook)\ + (abfd, filehdr, aouthdr)) + +#define bfd_coff_styp_to_sec_flags_hook(abfd, scnhdr, name, section, flags_ptr)\ + ((coff_backend_info (abfd)->_bfd_styp_to_sec_flags_hook)\ + (abfd, scnhdr, name, section, flags_ptr)) + +#define bfd_coff_set_alignment_hook(abfd, sec, scnhdr)\ + ((coff_backend_info (abfd)->_bfd_set_alignment_hook) (abfd, sec, scnhdr)) + +#define bfd_coff_slurp_symbol_table(abfd)\ + ((coff_backend_info (abfd)->_bfd_coff_slurp_symbol_table) (abfd)) + +#define bfd_coff_symname_in_debug(abfd, sym)\ + ((coff_backend_info (abfd)->_bfd_coff_symname_in_debug) (abfd, sym)) + +#define bfd_coff_force_symnames_in_strings(abfd)\ + (coff_backend_info (abfd)->_bfd_coff_force_symnames_in_strings) + +#define bfd_coff_debug_string_prefix_length(abfd)\ + (coff_backend_info (abfd)->_bfd_coff_debug_string_prefix_length) + +#define bfd_coff_print_aux(abfd, file, base, symbol, aux, indaux)\ + ((coff_backend_info (abfd)->_bfd_coff_print_aux)\ + (abfd, file, base, symbol, aux, indaux)) + +#define bfd_coff_reloc16_extra_cases(abfd, link_info, link_order,\ + reloc, data, src_ptr, dst_ptr)\ + ((coff_backend_info (abfd)->_bfd_coff_reloc16_extra_cases)\ + (abfd, link_info, link_order, reloc, data, src_ptr, dst_ptr)) + +#define bfd_coff_reloc16_estimate(abfd, section, reloc, shrink, link_info)\ + ((coff_backend_info (abfd)->_bfd_coff_reloc16_estimate)\ + (abfd, section, reloc, shrink, link_info)) + +#define bfd_coff_classify_symbol(abfd, sym)\ + ((coff_backend_info (abfd)->_bfd_coff_classify_symbol)\ + (abfd, sym)) + +#define bfd_coff_compute_section_file_positions(abfd)\ + ((coff_backend_info (abfd)->_bfd_coff_compute_section_file_positions)\ + (abfd)) + +#define bfd_coff_start_final_link(obfd, info)\ + ((coff_backend_info (obfd)->_bfd_coff_start_final_link)\ + (obfd, info)) +#define bfd_coff_relocate_section(obfd,info,ibfd,o,con,rel,isyms,secs)\ + ((coff_backend_info (ibfd)->_bfd_coff_relocate_section)\ + (obfd, info, ibfd, o, con, rel, isyms, secs)) +#define bfd_coff_rtype_to_howto(abfd, sec, rel, h, sym, addendp)\ + ((coff_backend_info (abfd)->_bfd_coff_rtype_to_howto)\ + (abfd, sec, rel, h, sym, addendp)) +#define bfd_coff_adjust_symndx(obfd, info, ibfd, sec, rel, adjustedp)\ + ((coff_backend_info (abfd)->_bfd_coff_adjust_symndx)\ + (obfd, info, ibfd, sec, rel, adjustedp)) +#define bfd_coff_link_add_one_symbol(info, abfd, name, flags, section,\ + value, string, cp, coll, hashp)\ + ((coff_backend_info (abfd)->_bfd_coff_link_add_one_symbol)\ + (info, abfd, name, flags, section, value, string, cp, coll, hashp)) + +#define bfd_coff_link_output_has_begun(a,p) \ + ((coff_backend_info (a)->_bfd_coff_link_output_has_begun) (a, p)) +#define bfd_coff_final_link_postscript(a,p) \ + ((coff_backend_info (a)->_bfd_coff_final_link_postscript) (a, p)) + +#define bfd_coff_have_print_pdata(a) \ + (coff_backend_info (a)->_bfd_coff_print_pdata) +#define bfd_coff_print_pdata(a,p) \ + ((coff_backend_info (a)->_bfd_coff_print_pdata) (a, p)) + +/* Macro: Returns true if the bfd is a PE executable as opposed to a + PE object file. */ +#define bfd_pei_p(abfd) \ + (CONST_STRNEQ ((abfd)->xvec->name, "pei-")) diff -Nru sbsigntool-0.6/src/Makefile.in sbsigntool-0.9.2/src/Makefile.in --- sbsigntool-0.6/src/Makefile.in 2012-10-12 00:16:36.000000000 +0000 +++ sbsigntool-0.9.2/src/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,941 +0,0 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ - esac; \ - test $$am__dry = yes; \ - } -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -bin_PROGRAMS = sbsign$(EXEEXT) sbverify$(EXEEXT) sbattach$(EXEEXT) \ - sbvarsign$(EXEEXT) sbsiglist$(EXEEXT) sbkeysync$(EXEEXT) -subdir = src -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" -PROGRAMS = $(bin_PROGRAMS) -am__objects_1 = -am__objects_2 = sbattach-idc.$(OBJEXT) sbattach-image.$(OBJEXT) \ - sbattach-fileio.$(OBJEXT) $(am__objects_1) -am_sbattach_OBJECTS = sbattach-sbattach.$(OBJEXT) $(am__objects_2) -sbattach_OBJECTS = $(am_sbattach_OBJECTS) -am__DEPENDENCIES_1 = -am__DEPENDENCIES_2 = ../lib/ccan/libccan.a $(am__DEPENDENCIES_1) -sbattach_DEPENDENCIES = $(am__DEPENDENCIES_2) -sbattach_LINK = $(CCLD) $(sbattach_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -am__objects_3 = sbkeysync-idc.$(OBJEXT) sbkeysync-image.$(OBJEXT) \ - sbkeysync-fileio.$(OBJEXT) $(am__objects_1) -am_sbkeysync_OBJECTS = sbkeysync-sbkeysync.$(OBJEXT) $(am__objects_3) -sbkeysync_OBJECTS = $(am_sbkeysync_OBJECTS) -sbkeysync_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1) -sbkeysync_LINK = $(CCLD) $(sbkeysync_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -am__objects_4 = sbsiglist-idc.$(OBJEXT) sbsiglist-image.$(OBJEXT) \ - sbsiglist-fileio.$(OBJEXT) $(am__objects_1) -am_sbsiglist_OBJECTS = sbsiglist-sbsiglist.$(OBJEXT) $(am__objects_4) -sbsiglist_OBJECTS = $(am_sbsiglist_OBJECTS) -sbsiglist_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1) -sbsiglist_LINK = $(CCLD) $(sbsiglist_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -am__objects_5 = sbsign-idc.$(OBJEXT) sbsign-image.$(OBJEXT) \ - sbsign-fileio.$(OBJEXT) $(am__objects_1) -am_sbsign_OBJECTS = sbsign-sbsign.$(OBJEXT) $(am__objects_5) -sbsign_OBJECTS = $(am_sbsign_OBJECTS) -sbsign_DEPENDENCIES = $(am__DEPENDENCIES_2) -sbsign_LINK = $(CCLD) $(sbsign_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -am__objects_6 = sbvarsign-idc.$(OBJEXT) sbvarsign-image.$(OBJEXT) \ - sbvarsign-fileio.$(OBJEXT) $(am__objects_1) -am_sbvarsign_OBJECTS = sbvarsign-sbvarsign.$(OBJEXT) $(am__objects_6) -sbvarsign_OBJECTS = $(am_sbvarsign_OBJECTS) -sbvarsign_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1) -sbvarsign_LINK = $(CCLD) $(sbvarsign_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -am__objects_7 = sbverify-idc.$(OBJEXT) sbverify-image.$(OBJEXT) \ - sbverify-fileio.$(OBJEXT) $(am__objects_1) -am_sbverify_OBJECTS = sbverify-sbverify.$(OBJEXT) $(am__objects_7) -sbverify_OBJECTS = $(am_sbverify_OBJECTS) -sbverify_DEPENDENCIES = $(am__DEPENDENCIES_2) -sbverify_LINK = $(CCLD) $(sbverify_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -SOURCES = $(sbattach_SOURCES) $(sbkeysync_SOURCES) \ - $(sbsiglist_SOURCES) $(sbsign_SOURCES) $(sbvarsign_SOURCES) \ - $(sbverify_SOURCES) -DIST_SOURCES = $(sbattach_SOURCES) $(sbkeysync_SOURCES) \ - $(sbsiglist_SOURCES) $(sbsign_SOURCES) $(sbvarsign_SOURCES) \ - $(sbverify_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCAS = @CCAS@ -CCASDEPMODE = @CCASDEPMODE@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EFI_CPPFLAGS = @EFI_CPPFLAGS@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GREP = @GREP@ -HELP2MAN = @HELP2MAN@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build_alias = @build_alias@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host_alias = @host_alias@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libcrypto_CFLAGS = @libcrypto_CFLAGS@ -libcrypto_LIBS = @libcrypto_LIBS@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -uuid_CFLAGS = @uuid_CFLAGS@ -uuid_LIBS = @uuid_LIBS@ -coff_headers = coff/external.h coff/pe.h -AM_CFLAGS = -Wall -Wextra --std=gnu99 -common_SOURCES = idc.c idc.h image.c image.h fileio.c fileio.h \ - efivars.h $(coff_headers) - -common_LDADD = ../lib/ccan/libccan.a $(libcrypto_LIBS) -common_CFLAGS = -I$(top_srcdir)/lib/ccan/ -sbsign_SOURCES = sbsign.c $(common_SOURCES) -sbsign_LDADD = $(common_LDADD) -sbsign_CFLAGS = $(AM_CFLAGS) $(common_CFLAGS) -sbverify_SOURCES = sbverify.c $(common_SOURCES) -sbverify_LDADD = $(common_LDADD) -sbverify_CFLAGS = $(AM_CFLAGS) $(common_CFLAGS) -sbattach_SOURCES = sbattach.c $(common_SOURCES) -sbattach_LDADD = $(common_LDADD) -sbattach_CFLAGS = $(AM_CFLAGS) $(common_CFLAGS) -sbvarsign_SOURCES = sbvarsign.c $(common_SOURCES) -sbvarsign_LDADD = $(common_LDADD) $(uuid_LIBS) -sbvarsign_CPPFLAGS = $(EFI_CPPFLAGS) -sbvarsign_CFLAGS = $(AM_CFLAGS) $(uuid_CFLAGS) $(common_CFLAGS) -sbsiglist_SOURCES = sbsiglist.c $(common_SOURCES) -sbsiglist_LDADD = $(common_LDADD) $(uuid_LIBS) -sbsiglist_CPPFLAGS = $(EFI_CPPFLAGS) -sbsiglist_CFLAGS = $(AM_CFLAGS) $(common_CFLAGS) -sbkeysync_SOURCES = sbkeysync.c $(common_SOURCES) -sbkeysync_LDADD = $(common_LDADD) $(uuid_LIBS) -sbkeysync_CPPFLAGS = $(EFI_CPPFLAGS) -sbkeysync_CFLAGS = $(AM_CFLAGS) $(common_CFLAGS) -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p; \ - then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) -sbattach$(EXEEXT): $(sbattach_OBJECTS) $(sbattach_DEPENDENCIES) $(EXTRA_sbattach_DEPENDENCIES) - @rm -f sbattach$(EXEEXT) - $(sbattach_LINK) $(sbattach_OBJECTS) $(sbattach_LDADD) $(LIBS) -sbkeysync$(EXEEXT): $(sbkeysync_OBJECTS) $(sbkeysync_DEPENDENCIES) $(EXTRA_sbkeysync_DEPENDENCIES) - @rm -f sbkeysync$(EXEEXT) - $(sbkeysync_LINK) $(sbkeysync_OBJECTS) $(sbkeysync_LDADD) $(LIBS) -sbsiglist$(EXEEXT): $(sbsiglist_OBJECTS) $(sbsiglist_DEPENDENCIES) $(EXTRA_sbsiglist_DEPENDENCIES) - @rm -f sbsiglist$(EXEEXT) - $(sbsiglist_LINK) $(sbsiglist_OBJECTS) $(sbsiglist_LDADD) $(LIBS) -sbsign$(EXEEXT): $(sbsign_OBJECTS) $(sbsign_DEPENDENCIES) $(EXTRA_sbsign_DEPENDENCIES) - @rm -f sbsign$(EXEEXT) - $(sbsign_LINK) $(sbsign_OBJECTS) $(sbsign_LDADD) $(LIBS) -sbvarsign$(EXEEXT): $(sbvarsign_OBJECTS) $(sbvarsign_DEPENDENCIES) $(EXTRA_sbvarsign_DEPENDENCIES) - @rm -f sbvarsign$(EXEEXT) - $(sbvarsign_LINK) $(sbvarsign_OBJECTS) $(sbvarsign_LDADD) $(LIBS) -sbverify$(EXEEXT): $(sbverify_OBJECTS) $(sbverify_DEPENDENCIES) $(EXTRA_sbverify_DEPENDENCIES) - @rm -f sbverify$(EXEEXT) - $(sbverify_LINK) $(sbverify_OBJECTS) $(sbverify_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbattach-fileio.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbattach-idc.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbattach-image.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbattach-sbattach.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbkeysync-fileio.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbkeysync-idc.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbkeysync-image.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbkeysync-sbkeysync.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbsiglist-fileio.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbsiglist-idc.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbsiglist-image.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbsiglist-sbsiglist.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbsign-fileio.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbsign-idc.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbsign-image.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbsign-sbsign.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbvarsign-fileio.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbvarsign-idc.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbvarsign-image.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbvarsign-sbvarsign.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbverify-fileio.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbverify-idc.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbverify-image.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sbverify-sbverify.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -sbattach-sbattach.o: sbattach.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -MT sbattach-sbattach.o -MD -MP -MF $(DEPDIR)/sbattach-sbattach.Tpo -c -o sbattach-sbattach.o `test -f 'sbattach.c' || echo '$(srcdir)/'`sbattach.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbattach-sbattach.Tpo $(DEPDIR)/sbattach-sbattach.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbattach.c' object='sbattach-sbattach.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -c -o sbattach-sbattach.o `test -f 'sbattach.c' || echo '$(srcdir)/'`sbattach.c - -sbattach-sbattach.obj: sbattach.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -MT sbattach-sbattach.obj -MD -MP -MF $(DEPDIR)/sbattach-sbattach.Tpo -c -o sbattach-sbattach.obj `if test -f 'sbattach.c'; then $(CYGPATH_W) 'sbattach.c'; else $(CYGPATH_W) '$(srcdir)/sbattach.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbattach-sbattach.Tpo $(DEPDIR)/sbattach-sbattach.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbattach.c' object='sbattach-sbattach.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -c -o sbattach-sbattach.obj `if test -f 'sbattach.c'; then $(CYGPATH_W) 'sbattach.c'; else $(CYGPATH_W) '$(srcdir)/sbattach.c'; fi` - -sbattach-idc.o: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -MT sbattach-idc.o -MD -MP -MF $(DEPDIR)/sbattach-idc.Tpo -c -o sbattach-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbattach-idc.Tpo $(DEPDIR)/sbattach-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbattach-idc.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -c -o sbattach-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c - -sbattach-idc.obj: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -MT sbattach-idc.obj -MD -MP -MF $(DEPDIR)/sbattach-idc.Tpo -c -o sbattach-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbattach-idc.Tpo $(DEPDIR)/sbattach-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbattach-idc.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -c -o sbattach-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` - -sbattach-image.o: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -MT sbattach-image.o -MD -MP -MF $(DEPDIR)/sbattach-image.Tpo -c -o sbattach-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbattach-image.Tpo $(DEPDIR)/sbattach-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbattach-image.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -c -o sbattach-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c - -sbattach-image.obj: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -MT sbattach-image.obj -MD -MP -MF $(DEPDIR)/sbattach-image.Tpo -c -o sbattach-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbattach-image.Tpo $(DEPDIR)/sbattach-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbattach-image.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -c -o sbattach-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` - -sbattach-fileio.o: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -MT sbattach-fileio.o -MD -MP -MF $(DEPDIR)/sbattach-fileio.Tpo -c -o sbattach-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbattach-fileio.Tpo $(DEPDIR)/sbattach-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbattach-fileio.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -c -o sbattach-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c - -sbattach-fileio.obj: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -MT sbattach-fileio.obj -MD -MP -MF $(DEPDIR)/sbattach-fileio.Tpo -c -o sbattach-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbattach-fileio.Tpo $(DEPDIR)/sbattach-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbattach-fileio.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbattach_CFLAGS) $(CFLAGS) -c -o sbattach-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` - -sbkeysync-sbkeysync.o: sbkeysync.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -MT sbkeysync-sbkeysync.o -MD -MP -MF $(DEPDIR)/sbkeysync-sbkeysync.Tpo -c -o sbkeysync-sbkeysync.o `test -f 'sbkeysync.c' || echo '$(srcdir)/'`sbkeysync.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbkeysync-sbkeysync.Tpo $(DEPDIR)/sbkeysync-sbkeysync.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbkeysync.c' object='sbkeysync-sbkeysync.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -c -o sbkeysync-sbkeysync.o `test -f 'sbkeysync.c' || echo '$(srcdir)/'`sbkeysync.c - -sbkeysync-sbkeysync.obj: sbkeysync.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -MT sbkeysync-sbkeysync.obj -MD -MP -MF $(DEPDIR)/sbkeysync-sbkeysync.Tpo -c -o sbkeysync-sbkeysync.obj `if test -f 'sbkeysync.c'; then $(CYGPATH_W) 'sbkeysync.c'; else $(CYGPATH_W) '$(srcdir)/sbkeysync.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbkeysync-sbkeysync.Tpo $(DEPDIR)/sbkeysync-sbkeysync.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbkeysync.c' object='sbkeysync-sbkeysync.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -c -o sbkeysync-sbkeysync.obj `if test -f 'sbkeysync.c'; then $(CYGPATH_W) 'sbkeysync.c'; else $(CYGPATH_W) '$(srcdir)/sbkeysync.c'; fi` - -sbkeysync-idc.o: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -MT sbkeysync-idc.o -MD -MP -MF $(DEPDIR)/sbkeysync-idc.Tpo -c -o sbkeysync-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbkeysync-idc.Tpo $(DEPDIR)/sbkeysync-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbkeysync-idc.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -c -o sbkeysync-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c - -sbkeysync-idc.obj: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -MT sbkeysync-idc.obj -MD -MP -MF $(DEPDIR)/sbkeysync-idc.Tpo -c -o sbkeysync-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbkeysync-idc.Tpo $(DEPDIR)/sbkeysync-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbkeysync-idc.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -c -o sbkeysync-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` - -sbkeysync-image.o: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -MT sbkeysync-image.o -MD -MP -MF $(DEPDIR)/sbkeysync-image.Tpo -c -o sbkeysync-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbkeysync-image.Tpo $(DEPDIR)/sbkeysync-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbkeysync-image.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -c -o sbkeysync-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c - -sbkeysync-image.obj: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -MT sbkeysync-image.obj -MD -MP -MF $(DEPDIR)/sbkeysync-image.Tpo -c -o sbkeysync-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbkeysync-image.Tpo $(DEPDIR)/sbkeysync-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbkeysync-image.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -c -o sbkeysync-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` - -sbkeysync-fileio.o: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -MT sbkeysync-fileio.o -MD -MP -MF $(DEPDIR)/sbkeysync-fileio.Tpo -c -o sbkeysync-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbkeysync-fileio.Tpo $(DEPDIR)/sbkeysync-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbkeysync-fileio.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -c -o sbkeysync-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c - -sbkeysync-fileio.obj: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -MT sbkeysync-fileio.obj -MD -MP -MF $(DEPDIR)/sbkeysync-fileio.Tpo -c -o sbkeysync-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbkeysync-fileio.Tpo $(DEPDIR)/sbkeysync-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbkeysync-fileio.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbkeysync_CPPFLAGS) $(CPPFLAGS) $(sbkeysync_CFLAGS) $(CFLAGS) -c -o sbkeysync-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` - -sbsiglist-sbsiglist.o: sbsiglist.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -MT sbsiglist-sbsiglist.o -MD -MP -MF $(DEPDIR)/sbsiglist-sbsiglist.Tpo -c -o sbsiglist-sbsiglist.o `test -f 'sbsiglist.c' || echo '$(srcdir)/'`sbsiglist.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsiglist-sbsiglist.Tpo $(DEPDIR)/sbsiglist-sbsiglist.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbsiglist.c' object='sbsiglist-sbsiglist.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -c -o sbsiglist-sbsiglist.o `test -f 'sbsiglist.c' || echo '$(srcdir)/'`sbsiglist.c - -sbsiglist-sbsiglist.obj: sbsiglist.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -MT sbsiglist-sbsiglist.obj -MD -MP -MF $(DEPDIR)/sbsiglist-sbsiglist.Tpo -c -o sbsiglist-sbsiglist.obj `if test -f 'sbsiglist.c'; then $(CYGPATH_W) 'sbsiglist.c'; else $(CYGPATH_W) '$(srcdir)/sbsiglist.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsiglist-sbsiglist.Tpo $(DEPDIR)/sbsiglist-sbsiglist.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbsiglist.c' object='sbsiglist-sbsiglist.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -c -o sbsiglist-sbsiglist.obj `if test -f 'sbsiglist.c'; then $(CYGPATH_W) 'sbsiglist.c'; else $(CYGPATH_W) '$(srcdir)/sbsiglist.c'; fi` - -sbsiglist-idc.o: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -MT sbsiglist-idc.o -MD -MP -MF $(DEPDIR)/sbsiglist-idc.Tpo -c -o sbsiglist-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsiglist-idc.Tpo $(DEPDIR)/sbsiglist-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbsiglist-idc.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -c -o sbsiglist-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c - -sbsiglist-idc.obj: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -MT sbsiglist-idc.obj -MD -MP -MF $(DEPDIR)/sbsiglist-idc.Tpo -c -o sbsiglist-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsiglist-idc.Tpo $(DEPDIR)/sbsiglist-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbsiglist-idc.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -c -o sbsiglist-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` - -sbsiglist-image.o: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -MT sbsiglist-image.o -MD -MP -MF $(DEPDIR)/sbsiglist-image.Tpo -c -o sbsiglist-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsiglist-image.Tpo $(DEPDIR)/sbsiglist-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbsiglist-image.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -c -o sbsiglist-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c - -sbsiglist-image.obj: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -MT sbsiglist-image.obj -MD -MP -MF $(DEPDIR)/sbsiglist-image.Tpo -c -o sbsiglist-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsiglist-image.Tpo $(DEPDIR)/sbsiglist-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbsiglist-image.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -c -o sbsiglist-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` - -sbsiglist-fileio.o: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -MT sbsiglist-fileio.o -MD -MP -MF $(DEPDIR)/sbsiglist-fileio.Tpo -c -o sbsiglist-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsiglist-fileio.Tpo $(DEPDIR)/sbsiglist-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbsiglist-fileio.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -c -o sbsiglist-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c - -sbsiglist-fileio.obj: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -MT sbsiglist-fileio.obj -MD -MP -MF $(DEPDIR)/sbsiglist-fileio.Tpo -c -o sbsiglist-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsiglist-fileio.Tpo $(DEPDIR)/sbsiglist-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbsiglist-fileio.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbsiglist_CPPFLAGS) $(CPPFLAGS) $(sbsiglist_CFLAGS) $(CFLAGS) -c -o sbsiglist-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` - -sbsign-sbsign.o: sbsign.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -MT sbsign-sbsign.o -MD -MP -MF $(DEPDIR)/sbsign-sbsign.Tpo -c -o sbsign-sbsign.o `test -f 'sbsign.c' || echo '$(srcdir)/'`sbsign.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsign-sbsign.Tpo $(DEPDIR)/sbsign-sbsign.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbsign.c' object='sbsign-sbsign.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -c -o sbsign-sbsign.o `test -f 'sbsign.c' || echo '$(srcdir)/'`sbsign.c - -sbsign-sbsign.obj: sbsign.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -MT sbsign-sbsign.obj -MD -MP -MF $(DEPDIR)/sbsign-sbsign.Tpo -c -o sbsign-sbsign.obj `if test -f 'sbsign.c'; then $(CYGPATH_W) 'sbsign.c'; else $(CYGPATH_W) '$(srcdir)/sbsign.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsign-sbsign.Tpo $(DEPDIR)/sbsign-sbsign.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbsign.c' object='sbsign-sbsign.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -c -o sbsign-sbsign.obj `if test -f 'sbsign.c'; then $(CYGPATH_W) 'sbsign.c'; else $(CYGPATH_W) '$(srcdir)/sbsign.c'; fi` - -sbsign-idc.o: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -MT sbsign-idc.o -MD -MP -MF $(DEPDIR)/sbsign-idc.Tpo -c -o sbsign-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsign-idc.Tpo $(DEPDIR)/sbsign-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbsign-idc.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -c -o sbsign-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c - -sbsign-idc.obj: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -MT sbsign-idc.obj -MD -MP -MF $(DEPDIR)/sbsign-idc.Tpo -c -o sbsign-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsign-idc.Tpo $(DEPDIR)/sbsign-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbsign-idc.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -c -o sbsign-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` - -sbsign-image.o: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -MT sbsign-image.o -MD -MP -MF $(DEPDIR)/sbsign-image.Tpo -c -o sbsign-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsign-image.Tpo $(DEPDIR)/sbsign-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbsign-image.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -c -o sbsign-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c - -sbsign-image.obj: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -MT sbsign-image.obj -MD -MP -MF $(DEPDIR)/sbsign-image.Tpo -c -o sbsign-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsign-image.Tpo $(DEPDIR)/sbsign-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbsign-image.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -c -o sbsign-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` - -sbsign-fileio.o: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -MT sbsign-fileio.o -MD -MP -MF $(DEPDIR)/sbsign-fileio.Tpo -c -o sbsign-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsign-fileio.Tpo $(DEPDIR)/sbsign-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbsign-fileio.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -c -o sbsign-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c - -sbsign-fileio.obj: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -MT sbsign-fileio.obj -MD -MP -MF $(DEPDIR)/sbsign-fileio.Tpo -c -o sbsign-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbsign-fileio.Tpo $(DEPDIR)/sbsign-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbsign-fileio.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbsign_CFLAGS) $(CFLAGS) -c -o sbsign-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` - -sbvarsign-sbvarsign.o: sbvarsign.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -MT sbvarsign-sbvarsign.o -MD -MP -MF $(DEPDIR)/sbvarsign-sbvarsign.Tpo -c -o sbvarsign-sbvarsign.o `test -f 'sbvarsign.c' || echo '$(srcdir)/'`sbvarsign.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbvarsign-sbvarsign.Tpo $(DEPDIR)/sbvarsign-sbvarsign.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbvarsign.c' object='sbvarsign-sbvarsign.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -c -o sbvarsign-sbvarsign.o `test -f 'sbvarsign.c' || echo '$(srcdir)/'`sbvarsign.c - -sbvarsign-sbvarsign.obj: sbvarsign.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -MT sbvarsign-sbvarsign.obj -MD -MP -MF $(DEPDIR)/sbvarsign-sbvarsign.Tpo -c -o sbvarsign-sbvarsign.obj `if test -f 'sbvarsign.c'; then $(CYGPATH_W) 'sbvarsign.c'; else $(CYGPATH_W) '$(srcdir)/sbvarsign.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbvarsign-sbvarsign.Tpo $(DEPDIR)/sbvarsign-sbvarsign.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbvarsign.c' object='sbvarsign-sbvarsign.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -c -o sbvarsign-sbvarsign.obj `if test -f 'sbvarsign.c'; then $(CYGPATH_W) 'sbvarsign.c'; else $(CYGPATH_W) '$(srcdir)/sbvarsign.c'; fi` - -sbvarsign-idc.o: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -MT sbvarsign-idc.o -MD -MP -MF $(DEPDIR)/sbvarsign-idc.Tpo -c -o sbvarsign-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbvarsign-idc.Tpo $(DEPDIR)/sbvarsign-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbvarsign-idc.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -c -o sbvarsign-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c - -sbvarsign-idc.obj: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -MT sbvarsign-idc.obj -MD -MP -MF $(DEPDIR)/sbvarsign-idc.Tpo -c -o sbvarsign-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbvarsign-idc.Tpo $(DEPDIR)/sbvarsign-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbvarsign-idc.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -c -o sbvarsign-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` - -sbvarsign-image.o: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -MT sbvarsign-image.o -MD -MP -MF $(DEPDIR)/sbvarsign-image.Tpo -c -o sbvarsign-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbvarsign-image.Tpo $(DEPDIR)/sbvarsign-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbvarsign-image.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -c -o sbvarsign-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c - -sbvarsign-image.obj: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -MT sbvarsign-image.obj -MD -MP -MF $(DEPDIR)/sbvarsign-image.Tpo -c -o sbvarsign-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbvarsign-image.Tpo $(DEPDIR)/sbvarsign-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbvarsign-image.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -c -o sbvarsign-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` - -sbvarsign-fileio.o: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -MT sbvarsign-fileio.o -MD -MP -MF $(DEPDIR)/sbvarsign-fileio.Tpo -c -o sbvarsign-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbvarsign-fileio.Tpo $(DEPDIR)/sbvarsign-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbvarsign-fileio.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -c -o sbvarsign-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c - -sbvarsign-fileio.obj: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -MT sbvarsign-fileio.obj -MD -MP -MF $(DEPDIR)/sbvarsign-fileio.Tpo -c -o sbvarsign-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbvarsign-fileio.Tpo $(DEPDIR)/sbvarsign-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbvarsign-fileio.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sbvarsign_CPPFLAGS) $(CPPFLAGS) $(sbvarsign_CFLAGS) $(CFLAGS) -c -o sbvarsign-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` - -sbverify-sbverify.o: sbverify.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -MT sbverify-sbverify.o -MD -MP -MF $(DEPDIR)/sbverify-sbverify.Tpo -c -o sbverify-sbverify.o `test -f 'sbverify.c' || echo '$(srcdir)/'`sbverify.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbverify-sbverify.Tpo $(DEPDIR)/sbverify-sbverify.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbverify.c' object='sbverify-sbverify.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -c -o sbverify-sbverify.o `test -f 'sbverify.c' || echo '$(srcdir)/'`sbverify.c - -sbverify-sbverify.obj: sbverify.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -MT sbverify-sbverify.obj -MD -MP -MF $(DEPDIR)/sbverify-sbverify.Tpo -c -o sbverify-sbverify.obj `if test -f 'sbverify.c'; then $(CYGPATH_W) 'sbverify.c'; else $(CYGPATH_W) '$(srcdir)/sbverify.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbverify-sbverify.Tpo $(DEPDIR)/sbverify-sbverify.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sbverify.c' object='sbverify-sbverify.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -c -o sbverify-sbverify.obj `if test -f 'sbverify.c'; then $(CYGPATH_W) 'sbverify.c'; else $(CYGPATH_W) '$(srcdir)/sbverify.c'; fi` - -sbverify-idc.o: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -MT sbverify-idc.o -MD -MP -MF $(DEPDIR)/sbverify-idc.Tpo -c -o sbverify-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbverify-idc.Tpo $(DEPDIR)/sbverify-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbverify-idc.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -c -o sbverify-idc.o `test -f 'idc.c' || echo '$(srcdir)/'`idc.c - -sbverify-idc.obj: idc.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -MT sbverify-idc.obj -MD -MP -MF $(DEPDIR)/sbverify-idc.Tpo -c -o sbverify-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbverify-idc.Tpo $(DEPDIR)/sbverify-idc.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='idc.c' object='sbverify-idc.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -c -o sbverify-idc.obj `if test -f 'idc.c'; then $(CYGPATH_W) 'idc.c'; else $(CYGPATH_W) '$(srcdir)/idc.c'; fi` - -sbverify-image.o: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -MT sbverify-image.o -MD -MP -MF $(DEPDIR)/sbverify-image.Tpo -c -o sbverify-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbverify-image.Tpo $(DEPDIR)/sbverify-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbverify-image.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -c -o sbverify-image.o `test -f 'image.c' || echo '$(srcdir)/'`image.c - -sbverify-image.obj: image.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -MT sbverify-image.obj -MD -MP -MF $(DEPDIR)/sbverify-image.Tpo -c -o sbverify-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbverify-image.Tpo $(DEPDIR)/sbverify-image.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='image.c' object='sbverify-image.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -c -o sbverify-image.obj `if test -f 'image.c'; then $(CYGPATH_W) 'image.c'; else $(CYGPATH_W) '$(srcdir)/image.c'; fi` - -sbverify-fileio.o: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -MT sbverify-fileio.o -MD -MP -MF $(DEPDIR)/sbverify-fileio.Tpo -c -o sbverify-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbverify-fileio.Tpo $(DEPDIR)/sbverify-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbverify-fileio.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -c -o sbverify-fileio.o `test -f 'fileio.c' || echo '$(srcdir)/'`fileio.c - -sbverify-fileio.obj: fileio.c -@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -MT sbverify-fileio.obj -MD -MP -MF $(DEPDIR)/sbverify-fileio.Tpo -c -o sbverify-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` -@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/sbverify-fileio.Tpo $(DEPDIR)/sbverify-fileio.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fileio.c' object='sbverify-fileio.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(sbverify_CFLAGS) $(CFLAGS) -c -o sbverify-fileio.obj `if test -f 'fileio.c'; then $(CYGPATH_W) 'fileio.c'; else $(CYGPATH_W) '$(srcdir)/fileio.c'; fi` - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) -installdirs: - for dir in "$(DESTDIR)$(bindir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-binPROGRAMS - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic ctags distclean distclean-compile \ - distclean-generic distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-binPROGRAMS \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-binPROGRAMS - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru sbsigntool-0.6/src/sbattach.c sbsigntool-0.9.2/src/sbattach.c --- sbsigntool-0.6/src/sbattach.c 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/src/sbattach.c 2019-01-21 19:56:20.000000000 +0000 @@ -44,6 +44,7 @@ #include +#include #include #include #include @@ -64,6 +65,7 @@ { "remove", no_argument, NULL, 'r' }, { "help", no_argument, NULL, 'h' }, { "version", no_argument, NULL, 'V' }, + { "signum", required_argument, NULL, 's' }, { NULL, 0, NULL, 0 }, }; @@ -80,7 +82,9 @@ "\t--detach copy the boot image's signature table\n" "\t to \n" "\t--remove remove the boot image's signature\n" - "\t table from the original file\n", + "\t table from the original file\n" + "\t--signum signature to operate on (defaults to\n" + "\t first)\n", toolname, toolname, toolname); } @@ -89,9 +93,9 @@ printf("%s %s\n", toolname, VERSION); } -static int detach_sig(struct image *image, const char *sig_filename) +static int detach_sig(struct image *image, int signum, const char *sig_filename) { - return image_write_detached(image, sig_filename); + return image_write_detached(image, signum, sig_filename); } static int attach_sig(struct image *image, const char *image_filename, @@ -137,11 +141,18 @@ return rc; } -static int remove_sig(struct image *image, const char *image_filename) +static int remove_sig(struct image *image, int signum, + const char *image_filename) { int rc; - image_remove_signature(image); + rc = image_remove_signature(image, signum); + + if (rc) { + fprintf(stderr, "Error, image has no signature at %d\n", + signum + 1); + return rc; + } rc = image_write(image, image_filename); if (rc) @@ -163,7 +174,7 @@ struct image *image; enum action action; bool remove; - int c, rc; + int c, rc, signum = 0; action = ACTION_NONE; sig_filename = NULL; @@ -171,7 +182,7 @@ for (;;) { int idx; - c = getopt_long(argc, argv, "a:d:rhV", options, &idx); + c = getopt_long(argc, argv, "a:d:s:rhV", options, &idx); if (c == -1) break; @@ -186,6 +197,10 @@ action = (c == 'a') ? ACTION_ATTACH : ACTION_DETACH; sig_filename = optarg; break; + case 's': + /* humans count from 1 not zero */ + signum = atoi(optarg) - 1; + break; case 'r': remove = true; break; @@ -218,6 +233,12 @@ ERR_load_crypto_strings(); OpenSSL_add_all_digests(); + OPENSSL_config(NULL); + /* here we may get highly unlikely failures or we'll get a + * complaint about FIPS signatures (usually becuase the FIPS + * module isn't present). In either case ignore the errors + * (malloc will cause other failures out lower down */ + ERR_clear_error(); image = image_load(image_filename); if (!image) { @@ -231,13 +252,13 @@ rc = attach_sig(image, image_filename, sig_filename); else if (action == ACTION_DETACH) - rc = detach_sig(image, sig_filename); + rc = detach_sig(image, signum, sig_filename); if (rc) goto out; if (remove) - rc = remove_sig(image, image_filename); + rc = remove_sig(image, signum, image_filename); out: talloc_free(image); diff -Nru sbsigntool-0.6/src/sbkeysync.c sbsigntool-0.9.2/src/sbkeysync.c --- sbsigntool-0.6/src/sbkeysync.c 2012-10-10 17:21:54.000000000 +0000 +++ sbsigntool-0.9.2/src/sbkeysync.c 2019-01-21 19:56:20.000000000 +0000 @@ -43,12 +43,11 @@ #include -#include - #include #include #include +#include #include #include @@ -56,7 +55,8 @@ #include "efivars.h" #define EFIVARS_MOUNTPOINT "/sys/firmware/efi/efivars" -#define EFIVARS_FSTYPE 0x6165676C +#define PSTORE_FSTYPE 0x6165676C +#define EFIVARS_FSTYPE 0xde5e81e4 #define EFI_IMAGE_SECURITY_DATABASE_GUID \ { 0xd719b2cb, 0x3d3a, 0x4596, \ @@ -203,16 +203,15 @@ return -1; /* we use the X509 serial number as the key ID */ - if (!x509->cert_info || !x509->cert_info->serialNumber) + serial = X509_get_serialNumber(x509); + if (!serial) goto out; - serial = x509->cert_info->serialNumber; - key->id_len = ASN1_STRING_length(serial); key->id = talloc_memdup(key, ASN1_STRING_data(serial), key->id_len); key->description = talloc_array(key, char, description_len); - X509_NAME_oneline(x509->cert_info->subject, + X509_NAME_oneline(X509_get_subject_name(x509), key->description, description_len); rc = 0; @@ -533,7 +532,7 @@ if (rc) return -1; - if (statbuf.f_type != EFIVARS_FSTYPE) + if (statbuf.f_type != EFIVARS_FSTYPE && statbuf.f_type != PSTORE_FSTYPE) return -1; return 0; @@ -931,6 +930,12 @@ ERR_load_crypto_strings(); OpenSSL_add_all_digests(); OpenSSL_add_all_ciphers(); + OPENSSL_config(NULL); + /* here we may get highly unlikely failures or we'll get a + * complaint about FIPS signatures (usually becuase the FIPS + * module isn't present). In either case ignore the errors + * (malloc will cause other failures out lower down */ + ERR_clear_error(); ctx->filesystem_keys = init_keyset(ctx); ctx->firmware_keys = init_keyset(ctx); diff -Nru sbsigntool-0.6/src/sbsign.c sbsigntool-0.9.2/src/sbsign.c --- sbsigntool-0.6/src/sbsign.c 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/src/sbsign.c 2019-01-21 19:56:20.000000000 +0000 @@ -42,6 +42,7 @@ #include +#include #include #include #include @@ -73,6 +74,7 @@ { "verbose", no_argument, NULL, 'v' }, { "help", no_argument, NULL, 'h' }, { "version", no_argument, NULL, 'V' }, + { "engine", required_argument, NULL, 'e'}, { NULL, 0, NULL, 0 }, }; @@ -82,6 +84,7 @@ "\n" "Sign an EFI boot image for use with secure boot.\n\n" "Options:\n" + "\t--engine use the specified engine to load the key\n" "\t--key signing key (PEM-encoded RSA " "private key)\n" "\t--cert certificate (x509 certificate)\n" @@ -111,19 +114,21 @@ int main(int argc, char **argv) { - const char *keyfilename, *certfilename; + const char *keyfilename, *certfilename, *engine; struct sign_context *ctx; uint8_t *buf, *tmp; int rc, c, sigsize; + EVP_PKEY *pkey; ctx = talloc_zero(NULL, struct sign_context); keyfilename = NULL; certfilename = NULL; + engine = NULL; for (;;) { int idx; - c = getopt_long(argc, argv, "o:c:k:dvVh", options, &idx); + c = getopt_long(argc, argv, "o:c:k:dvVhe:", options, &idx); if (c == -1) break; @@ -149,6 +154,9 @@ case 'h': usage(); return EXIT_SUCCESS; + case 'e': + engine = optarg; + break; } } @@ -183,8 +191,16 @@ ERR_load_crypto_strings(); OpenSSL_add_all_digests(); OpenSSL_add_all_ciphers(); - - EVP_PKEY *pkey = fileio_read_pkey(keyfilename); + OPENSSL_config(NULL); + /* here we may get highly unlikely failures or we'll get a + * complaint about FIPS signatures (usually becuase the FIPS + * module isn't present). In either case ignore the errors + * (malloc will cause other failures out lower down */ + ERR_clear_error(); + if (engine) + pkey = fileio_read_engine_key(engine, keyfilename); + else + pkey = fileio_read_pkey(keyfilename); if (!pkey) return EXIT_FAILURE; @@ -219,9 +235,15 @@ image_add_signature(ctx->image, buf, sigsize); - if (ctx->detached) - image_write_detached(ctx->image, ctx->outfilename); - else + if (ctx->detached) { + int i; + uint8_t *buf; + size_t len; + + for (i = 0; !image_get_signature(ctx->image, i, &buf, &len); i++) + ; + image_write_detached(ctx->image, i - 1, ctx->outfilename); + } else image_write(ctx->image, ctx->outfilename); talloc_free(ctx); diff -Nru sbsigntool-0.6/src/sbvarsign.c sbsigntool-0.9.2/src/sbvarsign.c --- sbsigntool-0.6/src/sbvarsign.c 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/src/sbvarsign.c 2019-01-21 19:56:20.000000000 +0000 @@ -45,6 +45,7 @@ #include #include +#include #include #include #include @@ -268,7 +269,7 @@ return -1; } - len = i2d_PKCS7(p7, NULL); + len = i2d_PKCS7_SIGNED(p7->d.sign, NULL); /* set up our auth descriptor */ @@ -280,7 +281,7 @@ auth->AuthInfo.Hdr.wCertificateType = 0x0EF1; auth->AuthInfo.CertType = cert_pkcs7_guid; tmp = auth->AuthInfo.CertData; - i2d_PKCS7(p7, &tmp); + i2d_PKCS7_SIGNED(p7->d.sign, &tmp); ctx->auth_descriptor = auth; ctx->auth_descriptor_len = sizeof(*auth) + len; @@ -397,6 +398,7 @@ { "verbose", no_argument, NULL, 'v' }, { "help", no_argument, NULL, 'h' }, { "version", no_argument, NULL, 'V' }, + { "engine", required_argument, NULL, 'e'}, { NULL, 0, NULL, 0 }, }; @@ -408,6 +410,7 @@ " \n" "Sign a blob of data for use in SetVariable().\n\n" "Options:\n" + "\t--engine use the specified engine to load the key\n" "\t--key signing key (PEM-encoded RSA " "private key)\n" "\t--cert certificate (x509 certificate)\n" @@ -436,7 +439,7 @@ int main(int argc, char **argv) { - const char *guid_str, *attr_str, *varname; + const char *guid_str, *attr_str, *varname, *engine; const char *keyfilename, *certfilename; struct varsign_context *ctx; bool include_attrs; @@ -446,13 +449,14 @@ keyfilename = NULL; certfilename = NULL; + engine = NULL; guid_str = NULL; attr_str= NULL; include_attrs = false; for (;;) { int idx; - c = getopt_long(argc, argv, "o:g:a:k:c:ivVh", options, &idx); + c = getopt_long(argc, argv, "o:g:a:k:c:ivVhe:", options, &idx); if (c == -1) break; @@ -484,6 +488,9 @@ case 'h': usage(); return EXIT_SUCCESS; + case 'e': + engine = optarg; + break; } } @@ -506,6 +513,12 @@ OpenSSL_add_all_digests(); OpenSSL_add_all_ciphers(); ERR_load_crypto_strings(); + OPENSSL_config(NULL); + /* here we may get highly unlikely failures or we'll get a + * complaint about FIPS signatures (usually becuase the FIPS + * module isn't present). In either case ignore the errors + * (malloc will cause other failures out lower down */ + ERR_clear_error(); /* set up the variable signing context */ varname = argv[optind]; @@ -535,7 +548,10 @@ if (fileio_read_file(ctx, ctx->infilename, &ctx->data, &ctx->data_len)) return EXIT_FAILURE; - ctx->key = fileio_read_pkey(keyfilename); + if (engine) + ctx->key = fileio_read_engine_key(engine, keyfilename); + else + ctx->key = fileio_read_pkey(keyfilename); if (!ctx->key) return EXIT_FAILURE; diff -Nru sbsigntool-0.6/src/sbverify.c sbsigntool-0.9.2/src/sbverify.c --- sbsigntool-0.6/src/sbverify.c 2012-10-12 00:15:11.000000000 +0000 +++ sbsigntool-0.9.2/src/sbverify.c 2019-01-21 19:56:20.000000000 +0000 @@ -48,6 +48,7 @@ #include "idc.h" #include "fileio.h" +#include #include #include #include @@ -55,6 +56,17 @@ #include #include +#if OPENSSL_VERSION_NUMBER < 0x10100000L +#define X509_OBJECT_get0_X509(obj) ((obj)->data.x509) +#define X509_OBJECT_get_type(obj) ((obj)->type) +#define X509_STORE_CTX_get0_cert(ctx) ((ctx)->cert) +#define X509_STORE_get0_objects(certs) ((certs)->objs) +#define X509_get_extended_key_usage(cert) ((cert)->ex_xkusage) +#if OPENSSL_VERSION_NUMBER < 0x10020000L +#define X509_STORE_CTX_get0_store(ctx) ((ctx)->ctx) +#endif +#endif + static const char *toolname = "sbverify"; static const int cert_name_len = 160; @@ -65,7 +77,7 @@ static struct option options[] = { { "cert", required_argument, NULL, 'c' }, - { "no-verify", no_argument, NULL, 'n' }, + { "list", no_argument, NULL, 'l' }, { "detached", required_argument, NULL, 'd' }, { "verbose", no_argument, NULL, 'v' }, { "help", no_argument, NULL, 'h' }, @@ -79,7 +91,7 @@ "Verify a UEFI secure boot image.\n\n" "Options:\n" "\t--cert certificate (x509 certificate)\n" - "\t--no-verify don't perform certificate verification\n" + "\t--list list all signatures (but don't verify)\n" "\t--detached read signature from , instead of\n" "\t looking for an embedded signature\n", toolname); @@ -123,9 +135,9 @@ for (i = 0; i < sk_X509_num(p7->d.sign->cert); i++) { cert = sk_X509_value(p7->d.sign->cert, i); - X509_NAME_oneline(cert->cert_info->subject, + X509_NAME_oneline(X509_get_subject_name(cert), subject_name, cert_name_len); - X509_NAME_oneline(cert->cert_info->issuer, + X509_NAME_oneline(X509_get_issuer_name(cert), issuer_name, cert_name_len); printf(" - subject: %s\n", subject_name); @@ -136,20 +148,26 @@ static void print_certificate_store_certs(X509_STORE *certs) { char subject_name[cert_name_len + 1], issuer_name[cert_name_len + 1]; + STACK_OF(X509_OBJECT) *objs; X509_OBJECT *obj; + X509 *cert; int i; printf("certificate store:\n"); - for (i = 0; i < sk_X509_OBJECT_num(certs->objs); i++) { - obj = sk_X509_OBJECT_value(certs->objs, i); + objs = X509_STORE_get0_objects(certs); + + for (i = 0; i < sk_X509_OBJECT_num(objs); i++) { + obj = sk_X509_OBJECT_value(objs, i); - if (obj->type != X509_LU_X509) + if (X509_OBJECT_get_type(obj) != X509_LU_X509) continue; - X509_NAME_oneline(obj->data.x509->cert_info->subject, + cert = X509_OBJECT_get0_X509(obj); + + X509_NAME_oneline(X509_get_subject_name(cert), subject_name, cert_name_len); - X509_NAME_oneline(obj->data.x509->cert_info->issuer, + X509_NAME_oneline(X509_get_issuer_name(cert), issuer_name, cert_name_len); printf(" - subject: %s\n", subject_name); @@ -157,23 +175,6 @@ } } -static int load_image_signature_data(struct image *image, - uint8_t **buf, size_t *len) -{ - struct cert_table_header *header; - - if (!image->data_dir_sigtable->addr - || !image->data_dir_sigtable->size) { - fprintf(stderr, "No signature table present\n"); - return -1; - } - - header = (void *)image->buf + image->data_dir_sigtable->addr; - *buf = (void *)(header + 1); - *len = header->size - sizeof(*header); - return 0; -} - static int load_detached_signature_data(struct image *image, const char *filename, uint8_t **buf, size_t *len) { @@ -182,12 +183,21 @@ static int cert_in_store(X509 *cert, X509_STORE_CTX *ctx) { - X509_OBJECT obj; + STACK_OF(X509_OBJECT) *objs; + X509_OBJECT *obj; + int i; - obj.type = X509_LU_X509; - obj.data.x509 = cert; + objs = X509_STORE_get0_objects(X509_STORE_CTX_get0_store(ctx)); + + for (i = 0; i < sk_X509_OBJECT_num(objs); i++) { + obj = sk_X509_OBJECT_value(objs, i); + + if (X509_OBJECT_get_type(obj) == X509_LU_X509 && + !X509_cmp(X509_OBJECT_get0_X509(obj), cert)) + return 1; + } - return X509_OBJECT_retrieve_match(ctx->ctx->objs, &obj) != NULL; + return 0; } static int x509_verify_cb(int status, X509_STORE_CTX *ctx) @@ -195,17 +205,25 @@ int err = X509_STORE_CTX_get_error(ctx); /* also accept code-signing keys */ - if (err == X509_V_ERR_INVALID_PURPOSE - && ctx->cert->ex_xkusage == XKU_CODE_SIGN) + if (err == X509_V_ERR_INVALID_PURPOSE && + X509_get_extended_key_usage(X509_STORE_CTX_get0_cert(ctx)) + == XKU_CODE_SIGN) status = 1; - /* all certs given with the --cert argument are trusted */ else if (err == X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY || - err == X509_V_ERR_CERT_UNTRUSTED) { + err == X509_V_ERR_CERT_UNTRUSTED || + err == X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT || + err == X509_V_ERR_UNABLE_TO_VERIFY_LEAF_SIGNATURE) { + /* all certs given with the --cert argument are trusted */ - if (cert_in_store(ctx->current_cert, ctx)) + if (cert_in_store(X509_STORE_CTX_get_current_cert(ctx), ctx)) status = 1; - } + } else if (err == X509_V_ERR_CERT_HAS_EXPIRED || + err == X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD || + err == X509_V_ERR_CERT_NOT_YET_VALID || + err == X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD) + /* UEFI explicitly allows expired certificates */ + status = 1; return status; } @@ -214,7 +232,7 @@ { const char *detached_sig_filename, *image_filename; enum verify_status status; - int rc, c, flags, verify; + int rc, c, flags, list; const uint8_t *tmp_buf; struct image *image; X509_STORE *certs; @@ -224,19 +242,26 @@ bool verbose; BIO *idcbio; PKCS7 *p7; + int sig_count = 0; status = VERIFY_FAIL; certs = X509_STORE_new(); - verify = 1; + list = 0; verbose = false; detached_sig_filename = NULL; OpenSSL_add_all_digests(); ERR_load_crypto_strings(); + OPENSSL_config(NULL); + /* here we may get highly unlikely failures or we'll get a + * complaint about FIPS signatures (usually becuase the FIPS + * module isn't present). In either case ignore the errors + * (malloc will cause other failures out lower down */ + ERR_clear_error(); for (;;) { int idx; - c = getopt_long(argc, argv, "c:d:nVh", options, &idx); + c = getopt_long(argc, argv, "c:d:lvVh", options, &idx); if (c == -1) break; @@ -249,8 +274,8 @@ case 'd': detached_sig_filename = optarg; break; - case 'n': - verify = 0; + case 'l': + list = 1; break; case 'v': verbose = true; @@ -278,56 +303,80 @@ return EXIT_FAILURE; } - if (detached_sig_filename) - rc = load_detached_signature_data(image, detached_sig_filename, - &sig_buf, &sig_size); - else - rc = load_image_signature_data(image, &sig_buf, &sig_size); + for (;;) { + if (detached_sig_filename) { + if (sig_count++) + break; + + rc = load_detached_signature_data(image, detached_sig_filename, + &sig_buf, &sig_size); + } else + rc = image_get_signature(image, sig_count++, &sig_buf, &sig_size); + + if (rc) { + if (sig_count == 0) { + fprintf(stderr, "Unable to read signature data from %s\n", + detached_sig_filename ? : image_filename); + } + break; + } - if (rc) { - fprintf(stderr, "Unable to read signature data from %s\n", - detached_sig_filename ? : image_filename); - goto out; - } + tmp_buf = sig_buf; + if (verbose || list) + printf("signature %d\n", sig_count); + p7 = d2i_PKCS7(NULL, &tmp_buf, sig_size); + if (!p7) { + fprintf(stderr, "Unable to parse signature data\n"); + ERR_print_errors_fp(stderr); + break; + } - tmp_buf = sig_buf; - p7 = d2i_PKCS7(NULL, &tmp_buf, sig_size); - if (!p7) { - fprintf(stderr, "Unable to parse signature data\n"); - ERR_print_errors_fp(stderr); - goto out; - } + if (verbose || list) { + print_signature_info(p7); + //print_certificate_store_certs(certs); + } - if (verbose) { - print_signature_info(p7); - print_certificate_store_certs(certs); - } + if (list) + continue; - idcbio = BIO_new(BIO_s_mem()); - idc = IDC_get(p7, idcbio); - if (!idc) - goto out; - - rc = IDC_check_hash(idc, image); - if (rc) - goto out; - - flags = PKCS7_BINARY; - if (!verify) - flags |= PKCS7_NOVERIFY; - - X509_STORE_set_verify_cb_func(certs, x509_verify_cb); - rc = PKCS7_verify(p7, NULL, certs, idcbio, NULL, flags); - if (!rc) { - printf("PKCS7 verification failed\n"); - ERR_print_errors_fp(stderr); - goto out; - } + idcbio = BIO_new(BIO_s_mem()); + idc = IDC_get(p7, idcbio); + if (!idc) { + fprintf(stderr, "Unable to get IDC from PKCS7\n"); + break; + } + + rc = IDC_check_hash(idc, image); + if (rc) { + fprintf(stderr, "Image fails hash check\n"); + break; + } + + flags = PKCS7_BINARY; - status = VERIFY_OK; + /* OpenSSL 1.0.2e no longer allows calling PKCS7_verify with + * both data and content. Empty out the content. */ + p7->d.sign->contents->d.ptr = NULL; + + X509_STORE_set_verify_cb_func(certs, x509_verify_cb); + rc = PKCS7_verify(p7, NULL, certs, idcbio, NULL, flags); + if (rc) { + if (verbose) + printf("PKCS7 verification passed\n"); + + status = VERIFY_OK; + } else if (verbose) { + printf("PKCS7 verification failed\n"); + ERR_print_errors_fp(stderr); + } + + } -out: talloc_free(image); + + if (list) + exit(EXIT_SUCCESS); + if (status == VERIFY_OK) printf("Signature verification OK\n"); else diff -Nru sbsigntool-0.6/src/verify.c sbsigntool-0.9.2/src/verify.c --- sbsigntool-0.6/src/verify.c 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/src/verify.c 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,10 @@ + +#include +#include + +#include "image.h" + +int main(int argc, char **argv) +{ + return EXIT_SUCCESS; +} diff -Nru sbsigntool-0.6/tests/detach-remove.sh sbsigntool-0.9.2/tests/detach-remove.sh --- sbsigntool-0.6/tests/detach-remove.sh 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/tests/detach-remove.sh 2019-01-21 19:56:20.000000000 +0000 @@ -10,6 +10,10 @@ # ensure that there is no security directory objdump -p $unsigned | grep -q '0\+ 0\+ Security Directory' +## +# somewhat tricky: i386 pecoff binaries can be too short, so we add padding +# when signing, so make sure the sizes match modulo the padding +## # ensure that the unsigned file is the same size as our original binary -[ $(stat --format=%s "$image") -eq $(stat --format=%s "$unsigned") ] +[ $(( ($(stat --format=%s "$image")+7)&~7)) -eq $(( ($(stat --format=%s "$unsigned")+7)&~7)) ] diff -Nru sbsigntool-0.6/tests/Makefile.am sbsigntool-0.9.2/tests/Makefile.am --- sbsigntool-0.6/tests/Makefile.am 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/tests/Makefile.am 2019-01-21 19:56:20.000000000 +0000 @@ -3,38 +3,33 @@ test_key = private-key.rsa test_cert = public-cert.pem -test_arches = x86_64 i386 -test_images = test-x86_64.pecoff test-i386.pecoff +test_arches = $(EFI_ARCH) -check_PROGRAMS = test-x86_64.pecoff test-i386.pecoff +check_PROGRAMS = test.pecoff + +# override the automake rule to say we build from .elf files +test.pecoff$(EXEEXT): test.elf + +if TEST_BINARY_FORMAT +EFILDFLAGS = --defsym=EFI_SUBSYSTEM=0x0a +FORMAT = -O binary +else +FORMAT = --target=efi-app-$(EFI_ARCH) +endif check_DATA = $(test_key) $(test_cert) check_SCRIPTS = test-wrapper.sh -test_i386_pecoff_SOURCES = test.S test-i386.lds -test_x86_64_pecoff_SOURCES = test.S test-x86_64.lds - -test-%.pecoff: test-%.elf +.elf.pecoff: + echo "TEST ARCHES $(test_arches) TEST_COMPAT=$(TEST_COMPAT_FALSE)" $(OBJCOPY) -j .text -j .sdata -j .data \ -j .dynamic -j .dynsym -j .rel \ -j .rela -j .reloc \ - --target=efi-app-$(test_image_arch) $^ $@ - $(STRIP) $@ + $(FORMAT) $^ $@ -test-x86_64.pecoff: test_image_arch = x86-64 -test-x86_64.pecoff: test_lds = $(srcdir)/test-x86_64.lds -test-x86_64.pecoff: ASFLAGS += -m64 -test-x86_64.pecoff: LDFLAGS += -m64 -test-i386.pecoff: test_image_arch = i386 -test-i386.pecoff: test_lds = $(srcdir)/test-i386.lds -test-i386.pecoff: ASFLAGS += -m32 -test-i386.pecoff: LDFLAGS += -m32 - -test-%.elf: LDFLAGS = -nostdlib -T $(test_lds) -test-%.elf: test-%.$(OBJEXT) $(test_lds) - $(LINK) $< +.$(OBJEXT).elf: + $(LD) $(EFILDFLAGS) -nostdlib -L /usr/lib -L /usr/lib64 -L $(CRTPATH) -shared -Bsymbolic $(CRTPATH)/crt0-efi-$(EFI_ARCH).o -T elf_$(EFI_ARCH)_efi.lds $< -o $@ -lefi -lgnuefi -test-%.$(OBJEXT): $(srcdir)/test.S - $(COMPILE.S) -o $@ $^ +AM_CFLAGS=-fpic -I/usr/include/efi -I/usr/include/efi/$(EFI_ARCH) $(test_key): Makefile openssl genrsa -out $@ 2048 @@ -52,13 +47,22 @@ verify-missing-image.sh \ verify-missing-cert.sh \ sign-invalidattach-verify.sh \ - cert-table-header.sh \ resign-warning.sh \ - reattach-warning.sh \ - detach-remove.sh + reattach-warning.sh + +if !TEST_BINARY_FORMAT +## +# These tests involve objdump which will fail because the format +# is not recognised. Someone needs to fix arm bfd to add efi +## +TESTS += cert-table-header.sh \ + detach-remove.sh +endif + TEST_EXTENSIONS = .sh -SH_LOG_COMPILER = TEST_ARCHES="$(test_arches)" $(srcdir)/test-wrapper.sh +AM_TESTS_ENVIRONMENT = TEST_ARCHES='$(test_arches)'; export TEST_ARCHES; +SH_LOG_COMPILER = $(srcdir)/test-wrapper.sh -EXTRA_DIST = $(test_lds) test.S $(TESTS) $(check_SCRIPTS) -CLEANFILES = $(test_key) $(test_cert) $(test_images) +EXTRA_DIST = test.S $(TESTS) $(check_SCRIPTS) +CLEANFILES = $(test_key) $(test_cert) diff -Nru sbsigntool-0.6/tests/Makefile.in sbsigntool-0.9.2/tests/Makefile.in --- sbsigntool-0.6/tests/Makefile.in 2012-10-12 00:16:36.000000000 +0000 +++ sbsigntool-0.9.2/tests/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,760 +0,0 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ - esac; \ - test $$am__dry = yes; \ - } -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -check_PROGRAMS = test-x86_64.pecoff$(EXEEXT) test-i386.pecoff$(EXEEXT) -subdir = tests -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am_test_i386_pecoff_OBJECTS = test.$(OBJEXT) -test_i386_pecoff_OBJECTS = $(am_test_i386_pecoff_OBJECTS) -test_i386_pecoff_LDADD = $(LDADD) -am_test_x86_64_pecoff_OBJECTS = test.$(OBJEXT) -test_x86_64_pecoff_OBJECTS = $(am_test_x86_64_pecoff_OBJECTS) -test_x86_64_pecoff_LDADD = $(LDADD) -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -SOURCES = $(test_i386_pecoff_SOURCES) $(test_x86_64_pecoff_SOURCES) -DIST_SOURCES = $(test_i386_pecoff_SOURCES) \ - $(test_x86_64_pecoff_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -ETAGS = etags -CTAGS = ctags -am__tty_colors = \ -red=; grn=; lgn=; blu=; std= -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -# Restructured Text title and section. -am__rst_title = sed 's/.*/ & /;h;s/./=/g;p;x;p;g;p;s/.*//' -am__rst_section = sed 'p;s/./=/g;p;g' -# Put stdin (possibly several lines separated by ". ") in a box. -# Prefix each line by 'col' and terminate each with 'std', for coloring. -# Multi line coloring is problematic with "less -R", so we really need -# to color each line individually. -am__text_box = $(AWK) '{ \ - n = split($$0, lines, "\\. "); max = 0; \ - for (i = 1; i <= n; ++i) \ - if (max < length(lines[i])) \ - max = length(lines[i]); \ - for (i = 0; i < max; ++i) \ - line = line "="; \ - print col line std; \ - for (i = 1; i <= n; ++i) \ - if (lines[i]) \ - print col lines[i] std; \ - print col line std; \ -}' -# Solaris 10 'make', and several other traditional 'make' implementations, -# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it -# by disabling -e (using the XSI extension "set +e") if it's set. -am__sh_e_setup = case $$- in *e*) set +e;; esac -# To be inserted before the command running the test. Creates the -# directory for the log if needed. Stores in $dir the directory -# containing $f, in $tst the test, in $log the log, and passes -# TESTS_ENVIRONMENT. Save and restore TERM around use of -# TESTS_ENVIRONMENT, in case that unsets it. -am__check_pre = \ -$(am__sh_e_setup); \ -$(am__vpath_adj_setup) $(am__vpath_adj) \ -srcdir=$(srcdir); export srcdir; \ -rm -f $@-t; \ -am__trap='rm -f '\''$(abs_builddir)/$@-t'\''; (exit $$st); exit $$st'; \ -trap "st=129; $$am__trap" 1; trap "st=130; $$am__trap" 2; \ -trap "st=141; $$am__trap" 13; trap "st=143; $$am__trap" 15; \ -am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`; \ -test "x$$am__odir" = x. || $(MKDIR_P) "$$am__odir" || exit $$?; \ -if test -f "./$$f"; then dir=./; \ -elif test -f "$$f"; then dir=; \ -else dir="$(srcdir)/"; fi; \ -tst=$$dir$$f; log='$@'; __SAVED_TERM=$$TERM; \ -$(TESTS_ENVIRONMENT) -# To be appended to the command running the test. Handle the stdout -# and stderr redirection, and catch the exit status. -am__check_post = \ ->$@-t 2>&1; \ -estatus=$$?; \ -if test -n '$(DISABLE_HARD_ERRORS)' \ - && test $$estatus -eq 99; then \ - estatus=1; \ -fi; \ -TERM=$$__SAVED_TERM; export TERM; \ -$(am__tty_colors); \ -xfailed=PASS; \ -case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ - xfailed=XFAIL;; \ -esac; \ -case $$estatus.$$xfailed in \ - 0.XFAIL) col=$$red; res=XPASS;; \ - 0.*) col=$$grn; res=PASS ;; \ - 77.*) col=$$blu; res=SKIP ;; \ - 99.*) col=$$red; res=FAIL ;; \ - *.XFAIL) col=$$lgn; res=XFAIL;; \ - *.*) col=$$red; res=FAIL ;; \ -esac; \ -echo "$${col}$$res$${std}: $$f"; \ -echo "$$res: $$f (exit: $$estatus)" | \ - $(am__rst_section) >$@; \ -cat $@-t >>$@; \ -rm -f $@-t -RECHECK_LOGS = $(TEST_LOGS) -AM_RECURSIVE_TARGETS = check recheck check-html recheck-html -TEST_SUITE_HTML = $(TEST_SUITE_LOG:.log=.html) -TEST_SUITE_LOG = test-suite.log -am__test_logs1 = $(TESTS:=.log) -am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) -TEST_LOGS = $(am__test_logs2:.sh.log=.log) -SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS) -TEST_LOGS_TMP = $(TEST_LOGS:.log=.log-t) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCAS = @CCAS@ -CCASDEPMODE = @CCASDEPMODE@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EFI_CPPFLAGS = @EFI_CPPFLAGS@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GREP = @GREP@ -HELP2MAN = @HELP2MAN@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build_alias = @build_alias@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host_alias = @host_alias@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libcrypto_CFLAGS = @libcrypto_CFLAGS@ -libcrypto_LIBS = @libcrypto_LIBS@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -uuid_CFLAGS = @uuid_CFLAGS@ -uuid_LIBS = @uuid_LIBS@ -AUTOMAKE_OPTIONS = parallel-tests -test_key = private-key.rsa -test_cert = public-cert.pem -test_arches = x86_64 i386 -test_images = test-x86_64.pecoff test-i386.pecoff -check_DATA = $(test_key) $(test_cert) -check_SCRIPTS = test-wrapper.sh -test_i386_pecoff_SOURCES = test.S test-i386.lds -test_x86_64_pecoff_SOURCES = test.S test-x86_64.lds -TESTS = sign-verify.sh \ - sign-verify-detached.sh \ - sign-detach-verify.sh \ - sign-attach-verify.sh \ - sign-missing-image.sh \ - sign-missing-cert.sh \ - sign-missing-key.sh \ - verify-missing-image.sh \ - verify-missing-cert.sh \ - sign-invalidattach-verify.sh \ - cert-table-header.sh \ - resign-warning.sh \ - reattach-warning.sh \ - detach-remove.sh - -TEST_EXTENSIONS = .sh -SH_LOG_COMPILER = TEST_ARCHES="$(test_arches)" $(srcdir)/test-wrapper.sh -EXTRA_DIST = $(test_lds) test.S $(TESTS) $(check_SCRIPTS) -CLEANFILES = $(test_key) $(test_cert) $(test_images) -all: all-am - -.SUFFIXES: -.SUFFIXES: .S .html .log .o .obj .sh .sh$(EXEEXT) -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu tests/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-checkPROGRAMS: - -test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test.Po@am__quote@ - -.S.o: -@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCCAS_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ $< - -.S.obj: -@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCCAS_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -$(TEST_SUITE_LOG): $(TEST_LOGS) - @$(am__sh_e_setup); \ - list='$(TEST_LOGS)'; \ - results=`for f in $$list; do \ - test -r $$f && read line < $$f && echo "$$line" \ - || echo FAIL; \ - done`; \ - all=`echo "$$results" | sed '/^$$/d' | wc -l | sed -e 's/^[ ]*//'`; \ - fail=`echo "$$results" | grep -c '^FAIL'`; \ - pass=`echo "$$results" | grep -c '^PASS'`; \ - skip=`echo "$$results" | grep -c '^SKIP'`; \ - xfail=`echo "$$results" | grep -c '^XFAIL'`; \ - xpass=`echo "$$results" | grep -c '^XPASS'`; \ - failures=`expr $$fail + $$xpass`; \ - all=`expr $$all - $$skip`; \ - if test "$$all" -eq 1; then tests=test; All=; \ - else tests=tests; All="All "; fi; \ - case fail=$$fail:xpass=$$xpass:xfail=$$xfail in \ - fail=0:xpass=0:xfail=0) \ - msg="$$All$$all $$tests passed. "; \ - exit=true;; \ - fail=0:xpass=0:xfail=*) \ - msg="$$All$$all $$tests behaved as expected"; \ - if test "$$xfail" -eq 1; then xfailures=failure; \ - else xfailures=failures; fi; \ - msg="$$msg ($$xfail expected $$xfailures). "; \ - exit=true;; \ - fail=*:xpass=0:xfail=*) \ - msg="$$fail of $$all $$tests failed. "; \ - exit=false;; \ - fail=*:xpass=*:xfail=*) \ - msg="$$failures of $$all $$tests did not behave as expected"; \ - if test "$$xpass" -eq 1; then xpasses=pass; \ - else xpasses=passes; fi; \ - msg="$$msg ($$xpass unexpected $$xpasses). "; \ - exit=false;; \ - *) \ - echo >&2 "incorrect case"; exit 4;; \ - esac; \ - if test "$$skip" -ne 0; then \ - if test "$$skip" -eq 1; then \ - msg="$$msg($$skip test was not run). "; \ - else \ - msg="$$msg($$skip tests were not run). "; \ - fi; \ - fi; \ - { \ - echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ - $(am__rst_title); \ - echo "$$msg"; \ - echo; \ - echo ".. contents:: :depth: 2"; \ - echo; \ - for f in $$list; do \ - test -r $$f && read line < $$f || line=; \ - case $$line in \ - PASS:*|XFAIL:*);; \ - *) echo; cat $$f;; \ - esac; \ - done; \ - } >$(TEST_SUITE_LOG).tmp; \ - mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ - if test "$$failures" -ne 0; then \ - msg="$${msg}See $(subdir)/$(TEST_SUITE_LOG). "; \ - if test -n "$(PACKAGE_BUGREPORT)"; then \ - msg="$${msg}Please report to $(PACKAGE_BUGREPORT). "; \ - fi; \ - fi; \ - test x"$$VERBOSE" = x || $$exit || cat $(TEST_SUITE_LOG); \ - $(am__tty_colors); \ - if $$exit; then \ - col="$$grn"; \ - else \ - col="$$red"; \ - fi; \ - echo "$$msg" | $(am__text_box) "col=$$col" "std=$$std"; \ - $$exit || exit 1 - -check-TESTS recheck: - @if test $@ != recheck; then \ - list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list; \ - fi - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - @list='' list2='$(TEST_LOGS)'; for f in $$list2; do \ - test .log = $$f && continue; \ - if test $@ = recheck; then \ - test -f $$f || continue; \ - if test -r $$f && read line < $$f; then \ - case $$line in FAIL*|XPASS*) : ;; *) continue;; esac; \ - fi; \ - fi; \ - if test -z "$$list"; then list=$$f; else list="$$list $$f"; fi; \ - done; \ - if test $@ = recheck && test -n "$$list"; then \ - $(am__make_dryrun) || rm -f $$list || exit 1; \ - fi; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$list" -recheck: $(check_PROGRAMS) $(check_SCRIPTS) $(check_DATA) - -am--mostlyclean-test-html: - list='$(TEST_LOGS:.log=.html)'; test -z "$$list" || rm -f $$list - rm -f $(TEST_SUITE_HTML) - -.log.html: - @list='$(RST2HTML) $$RST2HTML rst2html rst2html.py'; \ - for r2h in $$list; do \ - if ($$r2h --version) >/dev/null 2>&1; then \ - R2H=$$r2h; \ - fi; \ - done; \ - if test -z "$$R2H"; then \ - echo >&2 "cannot find rst2html, cannot create $@"; \ - exit 2; \ - fi; \ - $$R2H $< >$@.tmp - @mv $@.tmp $@ - -# Be sure to run check first, and then to convert the result. -# Beware of concurrent executions. Run "check" not "check-TESTS", as -# check-SCRIPTS and other dependencies are rebuilt by the former only. -# And expect check to fail. -check-html recheck-html: - @target=`echo $@ | sed 's/-html$$//'`; \ - rv=0; $(MAKE) $(AM_MAKEFLAGS) $$target || rv=$$?; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_HTML) TEST_LOGS= || exit 4; \ - exit $$rv -.sh.log: - @p='$<'; $(am__check_pre) $(SH_LOG_COMPILE) "$$tst" $(am__check_post) -@am__EXEEXT_TRUE@.sh$(EXEEXT).log: -@am__EXEEXT_TRUE@ @p='$<'; $(am__check_pre) $(SH_LOG_COMPILE) "$$tst" $(am__check_post) - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS) \ - $(check_DATA) - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) - -test -z "$(TEST_LOGS_TMP)" || rm -f $(TEST_LOGS_TMP) - -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-checkPROGRAMS clean-generic mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: am--mostlyclean-test-html mostlyclean-compile \ - mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: check-am check-html install-am install-strip recheck-html - -.PHONY: CTAGS GTAGS all all-am am--mostlyclean-test-html check \ - check-TESTS check-am check-html clean clean-checkPROGRAMS \ - clean-generic ctags distclean distclean-compile \ - distclean-generic distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic pdf pdf-am ps ps-am recheck recheck-html \ - tags uninstall uninstall-am - - -test-%.pecoff: test-%.elf - $(OBJCOPY) -j .text -j .sdata -j .data \ - -j .dynamic -j .dynsym -j .rel \ - -j .rela -j .reloc \ - --target=efi-app-$(test_image_arch) $^ $@ - $(STRIP) $@ - -test-x86_64.pecoff: test_image_arch = x86-64 -test-x86_64.pecoff: test_lds = $(srcdir)/test-x86_64.lds -test-x86_64.pecoff: ASFLAGS += -m64 -test-x86_64.pecoff: LDFLAGS += -m64 -test-i386.pecoff: test_image_arch = i386 -test-i386.pecoff: test_lds = $(srcdir)/test-i386.lds -test-i386.pecoff: ASFLAGS += -m32 -test-i386.pecoff: LDFLAGS += -m32 - -test-%.elf: LDFLAGS = -nostdlib -T $(test_lds) -test-%.elf: test-%.$(OBJEXT) $(test_lds) - $(LINK) $< - -test-%.$(OBJEXT): $(srcdir)/test.S - $(COMPILE.S) -o $@ $^ - -$(test_key): Makefile - openssl genrsa -out $@ 2048 - -$(test_cert): $(test_key) Makefile - openssl req -x509 -sha256 -subj '/' -new -key $< -out $@ - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru sbsigntool-0.6/tests/reattach-warning.sh sbsigntool-0.9.2/tests/reattach-warning.sh --- sbsigntool-0.6/tests/reattach-warning.sh 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/tests/reattach-warning.sh 2019-01-21 19:56:20.000000000 +0000 @@ -1,4 +1,8 @@ #!/bin/bash -e +## +# The original warning is gone because we now do multiple signatures +# instead check that the second signature is added +## signed="test.signed" sig="test.sig" @@ -7,4 +11,4 @@ cp "$image" "$signed" "$sbattach" --attach "$sig" "$signed" "$sbattach" --attach "$sig" "$signed" 2>&1 | - grep '^warning: overwriting' + grep '^Image was already signed; adding additional signature' diff -Nru sbsigntool-0.6/tests/resign-warning.sh sbsigntool-0.9.2/tests/resign-warning.sh --- sbsigntool-0.6/tests/resign-warning.sh 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/tests/resign-warning.sh 2019-01-21 19:56:20.000000000 +0000 @@ -1,7 +1,11 @@ #!/bin/bash -e +## +# The original warning is gone because we now do multiple signatures +# instead check that the second signature is added +## signed="test.signed" "$sbsign" --cert "$cert" --key "$key" --output "$signed" "$image" "$sbsign" --cert "$cert" --key "$key" --output "$signed" "$signed" 2>&1 | - grep '^warning: overwriting' + grep '^Image was already signed; adding additional signature' diff -Nru sbsigntool-0.6/tests/test.c sbsigntool-0.9.2/tests/test.c --- sbsigntool-0.6/tests/test.c 1970-01-01 00:00:00.000000000 +0000 +++ sbsigntool-0.9.2/tests/test.c 2019-01-21 19:56:20.000000000 +0000 @@ -0,0 +1,8 @@ +#include +#include + +EFI_STATUS +efi_main (EFI_HANDLE image, EFI_SYSTEM_TABLE *systab) +{ + return EFI_SUCCESS; +} diff -Nru sbsigntool-0.6/tests/test-i386.lds sbsigntool-0.9.2/tests/test-i386.lds --- sbsigntool-0.6/tests/test-i386.lds 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/tests/test-i386.lds 1970-01-01 00:00:00.000000000 +0000 @@ -1,59 +0,0 @@ -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) -ENTRY(_start) -SECTIONS -{ - . = 0; - ImageBase = .; - .hash : { *(.hash) } /* this MUST come first! */ - . = ALIGN(4096); - .eh_frame : - { - *(.eh_frame) - } - . = ALIGN(4096); - .text : - { - *(.text) - } - . = ALIGN(4096); - .reloc : - { - *(.reloc) - } - . = ALIGN(4096); - .data : - { - *(.rodata*) - *(.got.plt) - *(.got) - *(.data*) - *(.sdata) - /* the EFI loader doesn't seem to like a .bss section, so we stick - it all into .data: */ - *(.sbss) - *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - *(.rel.local) - } - . = ALIGN(4096); - .dynamic : { *(.dynamic) } - . = ALIGN(4096); - .rela : - { - *(.rela.data*) - *(.rela.got) - *(.rela.stab) - } - . = ALIGN(4096); - .dynsym : { *(.dynsym) } - . = ALIGN(4096); - .dynstr : { *(.dynstr) } - . = ALIGN(4096); - .ignored.reloc : - { - *(.rela.reloc) - } -} diff -Nru sbsigntool-0.6/tests/test.S sbsigntool-0.9.2/tests/test.S --- sbsigntool-0.6/tests/test.S 2012-07-01 19:50:50.000000000 +0000 +++ sbsigntool-0.9.2/tests/test.S 1970-01-01 00:00:00.000000000 +0000 @@ -1,9 +0,0 @@ - -.text -.globl _start -_start: - nop - -.data -data: - .long 0x0 diff -Nru sbsigntool-0.6/tests/test-wrapper.sh sbsigntool-0.9.2/tests/test-wrapper.sh --- sbsigntool-0.6/tests/test-wrapper.sh 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/tests/test-wrapper.sh 2019-01-21 19:56:20.000000000 +0000 @@ -24,7 +24,7 @@ test="$1" # image depends on the test arch - image="$datadir/test-$arch.pecoff" + image="$datadir/test.pecoff" export image # create the temporary directory... diff -Nru sbsigntool-0.6/tests/test-x86_64.lds sbsigntool-0.9.2/tests/test-x86_64.lds --- sbsigntool-0.6/tests/test-x86_64.lds 2012-10-01 15:11:52.000000000 +0000 +++ sbsigntool-0.9.2/tests/test-x86_64.lds 1970-01-01 00:00:00.000000000 +0000 @@ -1,60 +0,0 @@ -/* Same as elf_x86_64_fbsd_efi.lds, except for OUTPUT_FORMAT below - KEEP IN SYNC */ -OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") -OUTPUT_ARCH(i386:x86-64) -ENTRY(_start) -SECTIONS -{ - . = 0; - ImageBase = .; - .hash : { *(.hash) } /* this MUST come first! */ - . = ALIGN(4096); - .eh_frame : - { - *(.eh_frame) - } - . = ALIGN(4096); - .text : - { - *(.text) - } - . = ALIGN(4096); - .reloc : - { - *(.reloc) - } - . = ALIGN(4096); - .data : - { - *(.rodata*) - *(.got.plt) - *(.got) - *(.data*) - *(.sdata) - /* the EFI loader doesn't seem to like a .bss section, so we stick - it all into .data: */ - *(.sbss) - *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - *(.rel.local) - } - . = ALIGN(4096); - .dynamic : { *(.dynamic) } - . = ALIGN(4096); - .rela : - { - *(.rela.data*) - *(.rela.got) - *(.rela.stab) - } - . = ALIGN(4096); - .dynsym : { *(.dynsym) } - . = ALIGN(4096); - .dynstr : { *(.dynstr) } - . = ALIGN(4096); - .ignored.reloc : - { - *(.rela.reloc) - } -}