diff -Nru speex-1.2~rc1.2/acinclude.m4 speex-1.2.0/acinclude.m4 --- speex-1.2~rc1.2/acinclude.m4 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/acinclude.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,102 +0,0 @@ -# Configure paths for libogg -# Jack Moffitt 10-21-2000 -# Shamelessly stolen from Owen Taylor and Manish Singh - -dnl XIPH_PATH_OGG([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]) -dnl Test for libogg, and define OGG_CFLAGS and OGG_LIBS -dnl -AC_DEFUN([XIPH_PATH_OGG], -[dnl -dnl Get the cflags and libraries -dnl -AC_ARG_WITH(ogg,[ --with-ogg=PFX Prefix where libogg is installed (optional)], ogg_prefix="$withval", ogg_prefix="") -AC_ARG_WITH(ogg-libraries,[ --with-ogg-libraries=DIR Directory where libogg library is installed (optional)], ogg_libraries="$withval", ogg_libraries="") -AC_ARG_WITH(ogg-includes,[ --with-ogg-includes=DIR Directory where libogg header files are installed (optional)], ogg_includes="$withval", ogg_includes="") -AC_ARG_ENABLE(oggtest, [ --disable-oggtest Do not try to compile and run a test Ogg program],, enable_oggtest=yes) - - if test "x$ogg_libraries" != "x" ; then - OGG_LIBS="-L$ogg_libraries" - elif test "x$ogg_prefix" != "x" ; then - OGG_LIBS="-L$ogg_prefix/lib" - elif test "x$prefix" != "xNONE" ; then - OGG_LIBS="-L$prefix/lib" - fi - - OGG_LIBS="$OGG_LIBS -logg" - - if test "x$ogg_includes" != "x" ; then - OGG_CFLAGS="-I$ogg_includes" - elif test "x$ogg_prefix" != "x" ; then - OGG_CFLAGS="-I$ogg_prefix/include" - elif test "x$prefix" != "xNONE"; then - OGG_CFLAGS="-I$prefix/include" - fi - - AC_MSG_CHECKING(for Ogg) - no_ogg="" - - - if test "x$enable_oggtest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $OGG_CFLAGS" - LIBS="$LIBS $OGG_LIBS" -dnl -dnl Now check if the installed Ogg is sufficiently new. -dnl - rm -f conf.oggtest - AC_TRY_RUN([ -#include -#include -#include -#include - -int main () -{ - system("touch conf.oggtest"); - return 0; -} - -],, no_ogg=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - - if test "x$no_ogg" = "x" ; then - AC_MSG_RESULT(yes) - ifelse([$1], , :, [$1]) - else - AC_MSG_RESULT(no) - if test -f conf.oggtest ; then - : - else - echo "*** Could not run Ogg test program, checking why..." - CFLAGS="$CFLAGS $OGG_CFLAGS" - LIBS="$LIBS $OGG_LIBS" - AC_TRY_LINK([ -#include -#include -], [ return 0; ], - [ echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding Ogg or finding the wrong" - echo "*** version of Ogg. If it is not finding Ogg, you'll need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" - echo "*** to the installed location Also, make sure you have run ldconfig if that" - echo "*** is required on your system" - echo "***" - echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], - [ echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means Ogg was incorrectly installed" - echo "*** or that you have moved Ogg since it was installed." ]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - OGG_CFLAGS="" - OGG_LIBS="" - ifelse([$2], , :, [$2]) - fi - AC_SUBST(OGG_CFLAGS) - AC_SUBST(OGG_LIBS) - rm -f conf.oggtest -]) diff -Nru speex-1.2~rc1.2/aclocal.m4 speex-1.2.0/aclocal.m4 --- speex-1.2~rc1.2/aclocal.m4 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/aclocal.m4 2016-12-07 23:21:03.000000000 +0000 @@ -1,6 +1,6 @@ -# generated automatically by aclocal 1.14.1 -*- Autoconf -*- +# generated automatically by aclocal 1.15 -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -20,8824 +20,7 @@ If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -m4_define([_LT_COPYING], [dnl -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -]) - -# serial 57 LT_INIT - - -# LT_PREREQ(VERSION) -# ------------------ -# Complain and exit if this libtool version is less that VERSION. -m4_defun([LT_PREREQ], -[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, - [m4_default([$3], - [m4_fatal([Libtool version $1 or higher is required], - 63)])], - [$2])]) - - -# _LT_CHECK_BUILDDIR -# ------------------ -# Complain if the absolute build directory name contains unusual characters -m4_defun([_LT_CHECK_BUILDDIR], -[case `pwd` in - *\ * | *\ *) - AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; -esac -]) - - -# LT_INIT([OPTIONS]) -# ------------------ -AC_DEFUN([LT_INIT], -[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -AC_BEFORE([$0], [LT_LANG])dnl -AC_BEFORE([$0], [LT_OUTPUT])dnl -AC_BEFORE([$0], [LTDL_INIT])dnl -m4_require([_LT_CHECK_BUILDDIR])dnl - -dnl Autoconf doesn't catch unexpanded LT_ macros by default: -m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl -m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl -dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 -dnl unless we require an AC_DEFUNed macro: -AC_REQUIRE([LTOPTIONS_VERSION])dnl -AC_REQUIRE([LTSUGAR_VERSION])dnl -AC_REQUIRE([LTVERSION_VERSION])dnl -AC_REQUIRE([LTOBSOLETE_VERSION])dnl -m4_require([_LT_PROG_LTMAIN])dnl - -_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) - -dnl Parse OPTIONS -_LT_SET_OPTIONS([$0], [$1]) - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -_LT_SETUP - -# Only expand once: -m4_define([LT_INIT]) -])# LT_INIT - -# Old names: -AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) -AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PROG_LIBTOOL], []) -dnl AC_DEFUN([AM_PROG_LIBTOOL], []) - - -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -m4_defun([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -]) - - -# _LT_FILEUTILS_DEFAULTS -# ---------------------- -# It is okay to use these file commands and assume they have been set -# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. -m4_defun([_LT_FILEUTILS_DEFAULTS], -[: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} -])# _LT_FILEUTILS_DEFAULTS - - -# _LT_SETUP -# --------- -m4_defun([_LT_SETUP], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl - -_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl -dnl -_LT_DECL([], [host_alias], [0], [The host system])dnl -_LT_DECL([], [host], [0])dnl -_LT_DECL([], [host_os], [0])dnl -dnl -_LT_DECL([], [build_alias], [0], [The build system])dnl -_LT_DECL([], [build], [0])dnl -_LT_DECL([], [build_os], [0])dnl -dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -test -z "$LN_S" && LN_S="ln -s" -_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl -dnl -AC_REQUIRE([LT_CMD_MAX_LEN])dnl -_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl -_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl -dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl -m4_require([_LT_CMD_RELOAD])dnl -m4_require([_LT_CHECK_MAGIC_METHOD])dnl -m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl -m4_require([_LT_CMD_OLD_ARCHIVE])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_WITH_SYSROOT])dnl - -_LT_CONFIG_LIBTOOL_INIT([ -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi -]) -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -_LT_CHECK_OBJDIR - -m4_require([_LT_TAG_COMPILER])dnl - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -_LT_CC_BASENAME([$compiler]) - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - _LT_PATH_MAGIC - fi - ;; -esac - -# Use C for the default configuration in the libtool script -LT_SUPPORTED_TAG([CC]) -_LT_LANG_C_CONFIG -_LT_LANG_DEFAULT_CONFIG -_LT_CONFIG_COMMANDS -])# _LT_SETUP - - -# _LT_PREPARE_SED_QUOTE_VARS -# -------------------------- -# Define a few sed substitution that help us do robust quoting. -m4_defun([_LT_PREPARE_SED_QUOTE_VARS], -[# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([["`\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' -]) - -# _LT_PROG_LTMAIN -# --------------- -# Note that this code is called both from `configure', and `config.status' -# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -# `config.status' has no value for ac_aux_dir unless we are using Automake, -# so we pass a copy along to make sure it has a sensible value anyway. -m4_defun([_LT_PROG_LTMAIN], -[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl -_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -ltmain="$ac_aux_dir/ltmain.sh" -])# _LT_PROG_LTMAIN - - - -# So that we can recreate a full libtool script including additional -# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -# in macros and then make a single call at the end using the `libtool' -# label. - - -# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) -# ---------------------------------------- -# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL_INIT], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_INIT], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_INIT]) - - -# _LT_CONFIG_LIBTOOL([COMMANDS]) -# ------------------------------ -# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) - - -# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) -# ----------------------------------------------------- -m4_defun([_LT_CONFIG_SAVE_COMMANDS], -[_LT_CONFIG_LIBTOOL([$1]) -_LT_CONFIG_LIBTOOL_INIT([$2]) -]) - - -# _LT_FORMAT_COMMENT([COMMENT]) -# ----------------------------- -# Add leading comment marks to the start of each line, and a trailing -# full-stop to the whole comment if one is not present already. -m4_define([_LT_FORMAT_COMMENT], -[m4_ifval([$1], [ -m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], - [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) -)]) - - - - - -# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) -# ------------------------------------------------------------------- -# CONFIGNAME is the name given to the value in the libtool script. -# VARNAME is the (base) name used in the configure script. -# VALUE may be 0, 1 or 2 for a computed quote escaped value based on -# VARNAME. Any other value will be used directly. -m4_define([_LT_DECL], -[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], - [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], - [m4_ifval([$1], [$1], [$2])]) - lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) - m4_ifval([$4], - [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) - lt_dict_add_subkey([lt_decl_dict], [$2], - [tagged?], [m4_ifval([$5], [yes], [no])])]) -]) - - -# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) -# -------------------------------------------------------- -m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) - - -# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_tag_varnames], -[_lt_decl_filter([tagged?], [yes], $@)]) - - -# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) -# --------------------------------------------------------- -m4_define([_lt_decl_filter], -[m4_case([$#], - [0], [m4_fatal([$0: too few arguments: $#])], - [1], [m4_fatal([$0: too few arguments: $#: $1])], - [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], - [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], - [lt_dict_filter([lt_decl_dict], $@)])[]dnl -]) - - -# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) -# -------------------------------------------------- -m4_define([lt_decl_quote_varnames], -[_lt_decl_filter([value], [1], $@)]) - - -# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_dquote_varnames], -[_lt_decl_filter([value], [2], $@)]) - - -# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_varnames_tagged], -[m4_assert([$# <= 2])dnl -_$0(m4_quote(m4_default([$1], [[, ]])), - m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), - m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) -m4_define([_lt_decl_varnames_tagged], -[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) - - -# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_all_varnames], -[_$0(m4_quote(m4_default([$1], [[, ]])), - m4_if([$2], [], - m4_quote(lt_decl_varnames), - m4_quote(m4_shift($@))))[]dnl -]) -m4_define([_lt_decl_all_varnames], -[lt_join($@, lt_decl_varnames_tagged([$1], - lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl -]) - - -# _LT_CONFIG_STATUS_DECLARE([VARNAME]) -# ------------------------------------ -# Quote a variable value, and forward it to `config.status' so that its -# declaration there will have the same value as in `configure'. VARNAME -# must have a single quote delimited value for this to work. -m4_define([_LT_CONFIG_STATUS_DECLARE], -[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) - - -# _LT_CONFIG_STATUS_DECLARATIONS -# ------------------------------ -# We delimit libtool config variables with single quotes, so when -# we write them to config.status, we have to be sure to quote all -# embedded single quotes properly. In configure, this macro expands -# each variable declared with _LT_DECL (and _LT_TAGDECL) into: -# -# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' -m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], -[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), - [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAGS -# ---------------- -# Output comment and list of tags supported by the script -m4_defun([_LT_LIBTOOL_TAGS], -[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -available_tags="_LT_TAGS"dnl -]) - - -# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) -# ----------------------------------- -# Extract the dictionary values for VARNAME (optionally with TAG) and -# expand to a commented shell variable setting: -# -# # Some comment about what VAR is for. -# visible_name=$lt_internal_name -m4_define([_LT_LIBTOOL_DECLARE], -[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], - [description])))[]dnl -m4_pushdef([_libtool_name], - m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl -m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), - [0], [_libtool_name=[$]$1], - [1], [_libtool_name=$lt_[]$1], - [2], [_libtool_name=$lt_[]$1], - [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl -m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl -]) - - -# _LT_LIBTOOL_CONFIG_VARS -# ----------------------- -# Produce commented declarations of non-tagged libtool config variables -# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' -# script. Tagged libtool config variables (even for the LIBTOOL CONFIG -# section) are produced by _LT_LIBTOOL_TAG_VARS. -m4_defun([_LT_LIBTOOL_CONFIG_VARS], -[m4_foreach([_lt_var], - m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAG_VARS(TAG) -# ------------------------- -m4_define([_LT_LIBTOOL_TAG_VARS], -[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) - - -# _LT_TAGVAR(VARNAME, [TAGNAME]) -# ------------------------------ -m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) - - -# _LT_CONFIG_COMMANDS -# ------------------- -# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of -# variables for single and double quote escaping we saved from calls -# to _LT_DECL, we can put quote escaped variables declarations -# into `config.status', and then the shell code to quote escape them in -# for loops in `config.status'. Finally, any additional code accumulated -# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. -m4_defun([_LT_CONFIG_COMMANDS], -[AC_PROVIDE_IFELSE([LT_OUTPUT], - dnl If the libtool generation code has been placed in $CONFIG_LT, - dnl instead of duplicating it all over again into config.status, - dnl then we will have config.status run $CONFIG_LT later, so it - dnl needs to know what name is stored there: - [AC_CONFIG_COMMANDS([libtool], - [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], - dnl If the libtool generation code is destined for config.status, - dnl expand the accumulated commands and init code now: - [AC_CONFIG_COMMANDS([libtool], - [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) -])#_LT_CONFIG_COMMANDS - - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], -[ - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -_LT_CONFIG_STATUS_DECLARATIONS -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$[]1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_quote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_dquote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -_LT_OUTPUT_LIBTOOL_INIT -]) - -# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) -# ------------------------------------ -# Generate a child script FILE with all initialization necessary to -# reuse the environment learned by the parent script, and make the -# file executable. If COMMENT is supplied, it is inserted after the -# `#!' sequence but before initialization text begins. After this -# macro, additional text can be appended to FILE to form the body of -# the child script. The macro ends with non-zero status if the -# file could not be fully written (such as if the disk is full). -m4_ifdef([AS_INIT_GENERATED], -[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], -[m4_defun([_LT_GENERATED_FILE_INIT], -[m4_require([AS_PREPARE])]dnl -[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl -[lt_write_fail=0 -cat >$1 <<_ASEOF || lt_write_fail=1 -#! $SHELL -# Generated by $as_me. -$2 -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$1 <<\_ASEOF || lt_write_fail=1 -AS_SHELL_SANITIZE -_AS_PREPARE -exec AS_MESSAGE_FD>&1 -_ASEOF -test $lt_write_fail = 0 && chmod +x $1[]dnl -m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT - -# LT_OUTPUT -# --------- -# This macro allows early generation of the libtool script (before -# AC_OUTPUT is called), incase it is used in configure for compilation -# tests. -AC_DEFUN([LT_OUTPUT], -[: ${CONFIG_LT=./config.lt} -AC_MSG_NOTICE([creating $CONFIG_LT]) -_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], -[# Run this file to recreate a libtool stub with the current configuration.]) - -cat >>"$CONFIG_LT" <<\_LTEOF -lt_cl_silent=false -exec AS_MESSAGE_LOG_FD>>config.log -{ - echo - AS_BOX([Running $as_me.]) -} >&AS_MESSAGE_LOG_FD - -lt_cl_help="\ -\`$as_me' creates a local libtool stub from the current configuration, -for use in further configure time tests before the real libtool is -generated. - -Usage: $[0] [[OPTIONS]] - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - -Report bugs to ." - -lt_cl_version="\ -m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl -m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) -configured by $[0], generated by m4_PACKAGE_STRING. - -Copyright (C) 2011 Free Software Foundation, Inc. -This config.lt script is free software; the Free Software Foundation -gives unlimited permision to copy, distribute and modify it." - -while test $[#] != 0 -do - case $[1] in - --version | --v* | -V ) - echo "$lt_cl_version"; exit 0 ;; - --help | --h* | -h ) - echo "$lt_cl_help"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --quiet | --q* | --silent | --s* | -q ) - lt_cl_silent=: ;; - - -*) AC_MSG_ERROR([unrecognized option: $[1] -Try \`$[0] --help' for more information.]) ;; - - *) AC_MSG_ERROR([unrecognized argument: $[1] -Try \`$[0] --help' for more information.]) ;; - esac - shift -done - -if $lt_cl_silent; then - exec AS_MESSAGE_FD>/dev/null -fi -_LTEOF - -cat >>"$CONFIG_LT" <<_LTEOF -_LT_OUTPUT_LIBTOOL_COMMANDS_INIT -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AC_MSG_NOTICE([creating $ofile]) -_LT_OUTPUT_LIBTOOL_COMMANDS -AS_EXIT(0) -_LTEOF -chmod +x "$CONFIG_LT" - -# configure is writing to config.log, but config.lt does its own redirection, -# appending to config.log, which fails on DOS, as config.log is still kept -# open by configure. Here we exec the FD to /dev/null, effectively closing -# config.log, so it can be properly (re)opened and appended to by config.lt. -lt_cl_success=: -test "$silent" = yes && - lt_config_lt_args="$lt_config_lt_args --quiet" -exec AS_MESSAGE_LOG_FD>/dev/null -$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -exec AS_MESSAGE_LOG_FD>>config.log -$lt_cl_success || AS_EXIT(1) -])# LT_OUTPUT - - -# _LT_CONFIG(TAG) -# --------------- -# If TAG is the built-in tag, create an initial libtool script with a -# default configuration from the untagged config vars. Otherwise add code -# to config.status for appending the configuration named by TAG from the -# matching tagged config vars. -m4_defun([_LT_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_CONFIG_SAVE_COMMANDS([ - m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl - m4_if(_LT_TAG, [C], [ - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -_LT_COPYING -_LT_LIBTOOL_TAGS - -# ### BEGIN LIBTOOL CONFIG -_LT_LIBTOOL_CONFIG_VARS -_LT_LIBTOOL_TAG_VARS -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - _LT_PROG_LTMAIN - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - _LT_PROG_REPLACE_SHELLFNS - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -], -[cat <<_LT_EOF >> "$ofile" - -dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded -dnl in a comment (ie after a #). -# ### BEGIN LIBTOOL TAG CONFIG: $1 -_LT_LIBTOOL_TAG_VARS(_LT_TAG) -# ### END LIBTOOL TAG CONFIG: $1 -_LT_EOF -])dnl /m4_if -], -[m4_if([$1], [], [ - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile'], []) -])dnl /_LT_CONFIG_SAVE_COMMANDS -])# _LT_CONFIG - - -# LT_SUPPORTED_TAG(TAG) -# --------------------- -# Trace this macro to discover what tags are supported by the libtool -# --tag option, using: -# autoconf --trace 'LT_SUPPORTED_TAG:$1' -AC_DEFUN([LT_SUPPORTED_TAG], []) - - -# C support is built-in for now -m4_define([_LT_LANG_C_enabled], []) -m4_define([_LT_TAGS], []) - - -# LT_LANG(LANG) -# ------------- -# Enable libtool support for the given language if not already enabled. -AC_DEFUN([LT_LANG], -[AC_BEFORE([$0], [LT_OUTPUT])dnl -m4_case([$1], - [C], [_LT_LANG(C)], - [C++], [_LT_LANG(CXX)], - [Go], [_LT_LANG(GO)], - [Java], [_LT_LANG(GCJ)], - [Fortran 77], [_LT_LANG(F77)], - [Fortran], [_LT_LANG(FC)], - [Windows Resource], [_LT_LANG(RC)], - [m4_ifdef([_LT_LANG_]$1[_CONFIG], - [_LT_LANG($1)], - [m4_fatal([$0: unsupported language: "$1"])])])dnl -])# LT_LANG - - -# _LT_LANG(LANGNAME) -# ------------------ -m4_defun([_LT_LANG], -[m4_ifdef([_LT_LANG_]$1[_enabled], [], - [LT_SUPPORTED_TAG([$1])dnl - m4_append([_LT_TAGS], [$1 ])dnl - m4_define([_LT_LANG_]$1[_enabled], [])dnl - _LT_LANG_$1_CONFIG($1)])dnl -])# _LT_LANG - - -m4_ifndef([AC_PROG_GO], [ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_GO. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -m4_defun([AC_PROG_GO], -[AC_LANG_PUSH(Go)dnl -AC_ARG_VAR([GOC], [Go compiler command])dnl -AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl -_AC_ARG_VAR_LDFLAGS()dnl -AC_CHECK_TOOL(GOC, gccgo) -if test -z "$GOC"; then - if test -n "$ac_tool_prefix"; then - AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) - fi -fi -if test -z "$GOC"; then - AC_CHECK_PROG(GOC, gccgo, gccgo, false) -fi -])#m4_defun -])#m4_ifndef - - -# _LT_LANG_DEFAULT_CONFIG -# ----------------------- -m4_defun([_LT_LANG_DEFAULT_CONFIG], -[AC_PROVIDE_IFELSE([AC_PROG_CXX], - [LT_LANG(CXX)], - [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) - -AC_PROVIDE_IFELSE([AC_PROG_F77], - [LT_LANG(F77)], - [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) - -AC_PROVIDE_IFELSE([AC_PROG_FC], - [LT_LANG(FC)], - [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) - -dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal -dnl pulling things in needlessly. -AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([LT_PROG_GCJ], - [LT_LANG(GCJ)], - [m4_ifdef([AC_PROG_GCJ], - [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([A][M_PROG_GCJ], - [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([LT_PROG_GCJ], - [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) - -AC_PROVIDE_IFELSE([AC_PROG_GO], - [LT_LANG(GO)], - [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) - -AC_PROVIDE_IFELSE([LT_PROG_RC], - [LT_LANG(RC)], - [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) -])# _LT_LANG_DEFAULT_CONFIG - -# Obsolete macros: -AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) -AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) -AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) -AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_CXX], []) -dnl AC_DEFUN([AC_LIBTOOL_F77], []) -dnl AC_DEFUN([AC_LIBTOOL_FC], []) -dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) -dnl AC_DEFUN([AC_LIBTOOL_RC], []) - - -# _LT_TAG_COMPILER -# ---------------- -m4_defun([_LT_TAG_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl -_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl -_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl -_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_TAG_COMPILER - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -m4_defun([_LT_COMPILER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* -])# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -m4_defun([_LT_LINKER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* -])# _LT_LINKER_BOILERPLATE - -# _LT_REQUIRED_DARWIN_CHECKS -# ------------------------- -m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ - case $host_os in - rhapsody* | darwin*) - AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) - AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) - AC_CHECK_TOOL([LIPO], [lipo], [:]) - AC_CHECK_TOOL([OTOOL], [otool], [:]) - AC_CHECK_TOOL([OTOOL64], [otool64], [:]) - _LT_DECL([], [DSYMUTIL], [1], - [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) - _LT_DECL([], [NMEDIT], [1], - [Tool to change global to local symbols on Mac OS X]) - _LT_DECL([], [LIPO], [1], - [Tool to manipulate fat objects and archives on Mac OS X]) - _LT_DECL([], [OTOOL], [1], - [ldd/readelf like tool for Mach-O binaries on Mac OS X]) - _LT_DECL([], [OTOOL64], [1], - [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) - - AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], - [lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - # If there is a non-empty error log, and "single_module" - # appears in it, assume the flag caused a linker warning - if test -s conftest.err && $GREP single_module conftest.err; then - cat conftest.err >&AS_MESSAGE_LOG_FD - # Otherwise, if the output was created with a 0 exit code from - # the compiler, it worked. - elif test -f libconftest.dylib && test $_lt_result -eq 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi]) - - AC_CACHE_CHECK([for -exported_symbols_list linker flag], - [lt_cv_ld_exported_symbols_list], - [lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [lt_cv_ld_exported_symbols_list=yes], - [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS="$save_LDFLAGS" - ]) - - AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], - [lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD - echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD - $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD - echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD - $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -s conftest.err && $GREP force_load conftest.err; then - cat conftest.err >&AS_MESSAGE_LOG_FD - elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - ]) - case $host_os in - rhapsody* | darwin1.[[012]]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[[012]]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac -]) - - -# _LT_DARWIN_LINKER_FEATURES([TAG]) -# --------------------------------- -# Checks for linker and compiler features on darwin -m4_defun([_LT_DARWIN_LINKER_FEATURES], -[ - m4_require([_LT_REQUIRED_DARWIN_CHECKS]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_automatic, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], - [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='' - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all - _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - m4_if([$1], [CXX], -[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then - _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" - fi -],[]) - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi -]) - -# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) -# ---------------------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -# Store the results from the different compilers for each TAGNAME. -# Allow to override them for all tags through lt_cv_aix_libpath. -m4_defun([_LT_SYS_MODULE_PATH_AIX], -[m4_require([_LT_DECL_SED])dnl -if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], - [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ - lt_aix_libpath_sed='[ - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }]' - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi],[]) - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" - fi - ]) - aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) -fi -])# _LT_SYS_MODULE_PATH_AIX - - -# _LT_SHELL_INIT(ARG) -# ------------------- -m4_define([_LT_SHELL_INIT], -[m4_divert_text([M4SH-INIT], [$1 -])])# _LT_SHELL_INIT - - - -# _LT_PROG_ECHO_BACKSLASH -# ----------------------- -# Find how we can fake an echo command that does not interpret backslash. -# In particular, with Autoconf 2.60 or later we add some code to the start -# of the generated configure script which will find a shell with a builtin -# printf (which we can use as an echo command). -m4_defun([_LT_PROG_ECHO_BACKSLASH], -[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -AC_MSG_CHECKING([how to print strings]) -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$[]1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - -case "$ECHO" in - printf*) AC_MSG_RESULT([printf]) ;; - print*) AC_MSG_RESULT([print -r]) ;; - *) AC_MSG_RESULT([cat]) ;; -esac - -m4_ifdef([_AS_DETECT_SUGGESTED], -[_AS_DETECT_SUGGESTED([ - test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test "X`printf %s $ECHO`" = "X$ECHO" \ - || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) - -_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) -])# _LT_PROG_ECHO_BACKSLASH - - -# _LT_WITH_SYSROOT -# ---------------- -AC_DEFUN([_LT_WITH_SYSROOT], -[AC_MSG_CHECKING([for sysroot]) -AC_ARG_WITH([sysroot], -[ --with-sysroot[=DIR] Search for dependent libraries within DIR - (or the compiler's sysroot if not specified).], -[], [with_sysroot=no]) - -dnl lt_sysroot will always be passed unquoted. We quote it here -dnl in case the user passed a directory name. -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - AC_MSG_RESULT([${with_sysroot}]) - AC_MSG_ERROR([The sysroot must be an absolute path.]) - ;; -esac - - AC_MSG_RESULT([${lt_sysroot:-no}]) -_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl -[dependent libraries, and in which our libraries should be installed.])]) - -# _LT_ENABLE_LOCK -# --------------- -m4_defun([_LT_ENABLE_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AS_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - case `/usr/bin/file conftest.o` in - *x86-64*) - LD="${LD-ld} -m elf32_x86_64" - ;; - *) - LD="${LD-ld} -m elf_i386" - ;; - esac - ;; - powerpc64le-*) - LD="${LD-ld} -m elf32lppclinux" - ;; - powerpc64-*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - powerpcle-*) - LD="${LD-ld} -m elf64lppc" - ;; - powerpc-*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) - case $host in - i?86-*-solaris*) - LD="${LD-ld} -m elf_x86_64" - ;; - sparc*-*-solaris*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - # GNU ld 2.21 introduced _sol2 emulations. Use them if available. - if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD="${LD-ld}_sol2" - fi - ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" -])# _LT_ENABLE_LOCK - - -# _LT_PROG_AR -# ----------- -m4_defun([_LT_PROG_AR], -[AC_CHECK_TOOLS(AR, [ar], false) -: ${AR=ar} -: ${AR_FLAGS=cru} -_LT_DECL([], [AR], [1], [The archiver]) -_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) - -AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], - [lt_cv_ar_at_file=no - AC_COMPILE_IFELSE([AC_LANG_PROGRAM], - [echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' - AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -eq 0; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -ne 0; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - ]) - ]) - -if test "x$lt_cv_ar_at_file" = xno; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi -_LT_DECL([], [archiver_list_spec], [1], - [How to feed a file listing to the archiver]) -])# _LT_PROG_AR - - -# _LT_CMD_OLD_ARCHIVE -# ------------------- -m4_defun([_LT_CMD_OLD_ARCHIVE], -[_LT_PROG_AR - -AC_CHECK_TOOL(STRIP, strip, :) -test -z "$STRIP" && STRIP=: -_LT_DECL([], [STRIP], [1], [A symbol stripping program]) - -AC_CHECK_TOOL(RANLIB, ranlib, :) -test -z "$RANLIB" && RANLIB=: -_LT_DECL([], [RANLIB], [1], - [Commands used to install an old-style archive]) - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac -_LT_DECL([], [old_postinstall_cmds], [2]) -_LT_DECL([], [old_postuninstall_cmds], [2]) -_LT_TAGDECL([], [old_archive_cmds], [2], - [Commands used to build an old-style archive]) -_LT_DECL([], [lock_old_archive_extraction], [0], - [Whether to use a lock for old archive extraction]) -])# _LT_CMD_OLD_ARCHIVE - - -# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([_LT_COMPILER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $RM conftest* -]) - -if test x"[$]$2" = xyes; then - m4_if([$5], , :, [$5]) -else - m4_if([$6], , :, [$6]) -fi -])# _LT_COMPILER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) - - -# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------- -# Check whether the given linker option works -AC_DEFUN([_LT_LINKER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - m4_if([$4], , :, [$4]) -else - m4_if([$5], , :, [$5]) -fi -])# _LT_LINKER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) - - -# LT_CMD_MAX_LEN -#--------------- -AC_DEFUN([LT_CMD_MAX_LEN], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - os2*) - # The test takes a long time on OS/2. - lt_cv_sys_max_cmd_len=8192 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -max_cmd_len=$lt_cv_sys_max_cmd_len -_LT_DECL([], [max_cmd_len], [0], - [What is the maximum length of a command?]) -])# LT_CMD_MAX_LEN - -# Old name: -AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) - - -# _LT_HEADER_DLFCN -# ---------------- -m4_defun([_LT_HEADER_DLFCN], -[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl -])# _LT_HEADER_DLFCN - - -# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ---------------------------------------------------------------- -m4_defun([_LT_TRY_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -[#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -}] -_LT_EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_dlunknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_TRY_DLOPEN_SELF - - -# LT_SYS_DLOPEN_SELF -# ------------------ -AC_DEFUN([LT_SYS_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -_LT_DECL([dlopen_support], [enable_dlopen], [0], - [Whether dlopen is supported]) -_LT_DECL([dlopen_self], [enable_dlopen_self], [0], - [Whether dlopen of programs is supported]) -_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], - [Whether dlopen of statically linked programs is supported]) -])# LT_SYS_DLOPEN_SELF - -# Old name: -AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) - - -# _LT_COMPILER_C_O([TAGNAME]) -# --------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler. -# This macro does not hard code the compiler like AC_PROG_CC_C_O. -m4_defun([_LT_COMPILER_C_O], -[m4_require([_LT_DECL_SED])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -]) -_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], - [Does compiler simultaneously support -c and -o options?]) -])# _LT_COMPILER_C_O - - -# _LT_COMPILER_FILE_LOCKS([TAGNAME]) -# ---------------------------------- -# Check to see if we can do hard links to lock some files if needed -m4_defun([_LT_COMPILER_FILE_LOCKS], -[m4_require([_LT_ENABLE_LOCK])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_COMPILER_C_O([$1]) - -hard_links="nottested" -if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) -])# _LT_COMPILER_FILE_LOCKS - - -# _LT_CHECK_OBJDIR -# ---------------- -m4_defun([_LT_CHECK_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -_LT_DECL([], [objdir], [0], - [The name of the directory that contains temporary libtool files])dnl -m4_pattern_allow([LT_OBJDIR])dnl -AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", - [Define to the sub-directory in which libtool stores uninstalled libraries.]) -])# _LT_CHECK_OBJDIR - - -# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) -# -------------------------------------- -# Check hardcoding attributes. -m4_defun([_LT_LINKER_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || - test -n "$_LT_TAGVAR(runpath_var, $1)" || - test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || - test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -_LT_TAGDECL([], [hardcode_action], [0], - [How to hardcode a shared library path into an executable]) -])# _LT_LINKER_HARDCODE_LIBPATH - - -# _LT_CMD_STRIPLIB -# ---------------- -m4_defun([_LT_CMD_STRIPLIB], -[m4_require([_LT_DECL_EGREP]) -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) -_LT_DECL([], [striplib], [1]) -])# _LT_CMD_STRIPLIB - - -# _LT_SYS_DYNAMIC_LINKER([TAG]) -# ----------------------------- -# PORTME Fill in your ld.so characteristics -m4_defun([_LT_SYS_DYNAMIC_LINKER], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_OBJDUMP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -AC_MSG_CHECKING([dynamic linker characteristics]) -m4_if([$1], - [], [ -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[[lt_foo]]++; } - if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[[4-9]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[[45]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" - if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[23]].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ - freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[[3-9]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], - [lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ - LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], - [lt_cv_shlibpath_overrides_runpath=yes])]) - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - ]) - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - -_LT_DECL([], [variables_saved_for_relink], [1], - [Variables whose values should be saved in libtool wrapper scripts and - restored at link time]) -_LT_DECL([], [need_lib_prefix], [0], - [Do we need the "lib" prefix for modules?]) -_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) -_LT_DECL([], [version_type], [0], [Library versioning type]) -_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) -_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) -_LT_DECL([], [shlibpath_overrides_runpath], [0], - [Is shlibpath searched before the hard-coded library search path?]) -_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) -_LT_DECL([], [library_names_spec], [1], - [[List of archive names. First name is the real one, the rest are links. - The last name is the one that the linker finds with -lNAME]]) -_LT_DECL([], [soname_spec], [1], - [[The coded name of the library, if different from the real name]]) -_LT_DECL([], [install_override_mode], [1], - [Permission mode override for installation of shared libraries]) -_LT_DECL([], [postinstall_cmds], [2], - [Command to use after installation of a shared archive]) -_LT_DECL([], [postuninstall_cmds], [2], - [Command to use after uninstallation of a shared archive]) -_LT_DECL([], [finish_cmds], [2], - [Commands used to finish a libtool library installation in a directory]) -_LT_DECL([], [finish_eval], [1], - [[As "finish_cmds", except a single script fragment to be evaled but - not shown]]) -_LT_DECL([], [hardcode_into_libs], [0], - [Whether we should hardcode library paths into libraries]) -_LT_DECL([], [sys_lib_search_path_spec], [2], - [Compile-time system search path for libraries]) -_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], - [Run-time system search path for libraries]) -])# _LT_SYS_DYNAMIC_LINKER - - -# _LT_PATH_TOOL_PREFIX(TOOL) -# -------------------------- -# find a file program which can recognize shared library -AC_DEFUN([_LT_PATH_TOOL_PREFIX], -[m4_require([_LT_DECL_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="m4_if([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -_LT_DECL([], [MAGIC_CMD], [0], - [Used to examine libraries when file_magic_cmd begins with "file"])dnl -])# _LT_PATH_TOOL_PREFIX - -# Old name: -AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) - - -# _LT_PATH_MAGIC -# -------------- -# find a file program which can recognize a shared library -m4_defun([_LT_PATH_MAGIC], -[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# _LT_PATH_MAGIC - - -# LT_PATH_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([LT_PATH_LD], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PROG_ECHO_BACKSLASH])dnl - -AC_ARG_WITH([gnu-ld], - [AS_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no])dnl - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[[3-9]]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -_LT_DECL([], [deplibs_check_method], [1], - [Method to check whether dependent libraries are shared objects]) -_LT_DECL([], [file_magic_cmd], [1], - [Command to use when deplibs_check_method = "file_magic"]) -_LT_DECL([], [file_magic_glob], [1], - [How to find potential files when deplibs_check_method = "file_magic"]) -_LT_DECL([], [want_nocaseglob], [1], - [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) -])# _LT_CHECK_MAGIC_METHOD - - -# LT_PATH_NM -# ---------- -# find the pathname to a BSD- or MS-compatible name lister -AC_DEFUN([LT_PATH_NM], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi]) -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi - AC_SUBST([DUMPBIN]) - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm -AC_SUBST([NM]) -_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl - -AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], - [lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) - cat conftest.out >&AS_MESSAGE_LOG_FD - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest*]) -])# LT_PATH_NM - -# Old names: -AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) -AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_PROG_NM], []) -dnl AC_DEFUN([AC_PROG_NM], []) - -# _LT_CHECK_SHAREDLIB_FROM_LINKLIB -# -------------------------------- -# how to determine the name of the shared library -# associated with a specific link library. -# -- PORTME fill in with the dynamic library characteristics -m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], -[m4_require([_LT_DECL_EGREP]) -m4_require([_LT_DECL_OBJDUMP]) -m4_require([_LT_DECL_DLLTOOL]) -AC_CACHE_CHECK([how to associate runtime and link libraries], -lt_cv_sharedlib_from_linklib_cmd, -[lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" - ;; -esac -]) -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - -_LT_DECL([], [sharedlib_from_linklib_cmd], [1], - [Command to associate shared and link libraries]) -])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB - - -# _LT_PATH_MANIFEST_TOOL -# ---------------------- -# locate the manifest tool -m4_defun([_LT_PATH_MANIFEST_TOOL], -[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], - [lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&AS_MESSAGE_LOG_FD - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest*]) -if test "x$lt_cv_path_mainfest_tool" != xyes; then - MANIFEST_TOOL=: -fi -_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl -])# _LT_PATH_MANIFEST_TOOL - - -# LT_LIB_M -# -------- -# check for math library -AC_DEFUN([LT_LIB_M], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -AC_SUBST([LIBM]) -])# LT_LIB_M - -# Old name: -AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_CHECK_LIBM], []) - - -# _LT_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------- -m4_defun([_LT_COMPILER_NO_RTTI], -[m4_require([_LT_TAG_COMPILER])dnl - -_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; - *) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; - esac - - _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], - [Compiler flag to turn off builtin functions]) -])# _LT_COMPILER_NO_RTTI - - -# _LT_CMD_GLOBAL_SYMBOLS -# ---------------------- -m4_defun([_LT_CMD_GLOBAL_SYMBOLS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([LT_PATH_NM])dnl -AC_REQUIRE([LT_PATH_LD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_TAG_COMPILER])dnl - -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris*) - symcode='[[BDRT]]' - ;; -sco3.2v5*) - symcode='[[DT]]' - ;; -sysv4.2uw2*) - symcode='[[DT]]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[[ABDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK ['"\ -" {last_section=section; section=\$ 3};"\ -" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx]" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT@&t@_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT@&t@_DLSYM_CONST -#else -# define LT@&t@_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT@&t@_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[[]] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - -_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], - [Take the output of nm and produce a listing of raw symbols and C names]) -_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], - [Transform the output of nm in a proper C declaration]) -_LT_DECL([global_symbol_to_c_name_address], - [lt_cv_sys_global_symbol_to_c_name_address], [1], - [Transform the output of nm in a C name address pair]) -_LT_DECL([global_symbol_to_c_name_address_lib_prefix], - [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], - [Transform the output of nm in a C name address pair when lib prefix is needed]) -_LT_DECL([], [nm_file_list_spec], [1], - [Specify filename containing input files for $NM]) -]) # _LT_CMD_GLOBAL_SYMBOLS - - -# _LT_COMPILER_PIC([TAGNAME]) -# --------------------------- -m4_defun([_LT_COMPILER_PIC], -[m4_require([_LT_TAG_COMPILER])dnl -_LT_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_TAGVAR(lt_prog_compiler_static, $1)= - -m4_if([$1], [CXX], [ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix[[4-9]]*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - dgux*) - case $cc_basename in - ec++*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - KCC*) - # KAI C++ Compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - ecpc* ) - # old Intel C++ for x86_64 which still supported -KPIC. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - icpc* ) - # Intel C++, used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) - # IBM XL 8.0, 9.0 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd* | netbsdelf*-gnu) - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx*) - # Digital/Compaq C++ - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc*) - # Lucid - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - vxworks*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' - if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - hpux9* | hpux10* | hpux11*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' - _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' - ;; - nagfor*) - # NAG Fortran compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; - *Sun\ F* | *Sun*Fortran*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - *Intel*\ [[CF]]*Compiler*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - *Portland\ Group*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - rdos*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - solaris*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; - - sunos4*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - unicos*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - - uts4*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" - ;; -esac - -AC_CACHE_CHECK([for $compiler option to produce PIC], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], - [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], - [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], - [Additional compiler flags for building library objects]) - -_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], - [How to pass a linker flag through the compiler]) -# -# Check to make sure the static flag actually works. -# -wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" -_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), - $lt_tmp_static_flag, - [], - [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) -_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], - [Compiler flag to prevent dynamic linking]) -])# _LT_COMPILER_PIC - - -# _LT_LINKER_SHLIBS([TAGNAME]) -# ---------------------------- -# See if the linker supports building shared libraries. -m4_defun([_LT_LINKER_SHLIBS], -[AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -m4_if([$1], [CXX], [ - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - case $host_os in - aix[[4-9]]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw* | cegcc*) - case $cc_basename in - cl*) - _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - ;; - esac - ;; - linux* | k*bsd*-gnu | gnu*) - _LT_TAGVAR(link_all_deplibs, $1)=no - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -], [ - runpath_var= - _LT_TAGVAR(allow_undefined_flag, $1)= - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(archive_cmds, $1)= - _LT_TAGVAR(archive_expsym_cmds, $1)= - _LT_TAGVAR(compiler_needs_object, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(hardcode_automatic, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_TAGVAR(inherit_rpath, $1)=no - _LT_TAGVAR(link_all_deplibs, $1)=unknown - _LT_TAGVAR(module_cmds, $1)= - _LT_TAGVAR(module_expsym_cmds, $1)= - _LT_TAGVAR(old_archive_from_new_cmds, $1)= - _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_TAGVAR(thread_safe_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. -dnl Note also adjust exclude_expsyms for C++ above. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - linux* | k*bsd*-gnu | gnu*) - _LT_TAGVAR(link_all_deplibs, $1)=no - ;; - esac - - _LT_TAGVAR(ld_shlibs, $1)=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; - *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[[3-9]]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - _LT_TAGVAR(whole_archive_flag_spec, $1)= - tmp_sharedflag='--shared' ;; - xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - sunos4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then - runpath_var= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - _LT_TAGVAR(link_all_deplibs, $1)=no - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - bsdi[[45]]*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - esac - ;; - - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - m4_if($1, [], [ - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - _LT_LINKER_OPTION([if $CC understands -b], - _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], - [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) - ;; - esac - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], - [lt_cv_irix_exported_symbol], - [save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - AC_LINK_IFELSE( - [AC_LANG_SOURCE( - [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], - [C++], [[int foo (void) { return 0; }]], - [Fortran 77], [[ - subroutine foo - end]], - [Fortran], [[ - subroutine foo - end]])])], - [lt_cv_irix_exported_symbol=yes], - [lt_cv_irix_exported_symbol=no]) - LDFLAGS="$save_LDFLAGS"]) - if test "$lt_cv_irix_exported_symbol" = yes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - solaris*) - _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - fi - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' - ;; - esac - fi - fi -]) -AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld - -_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl -_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl -_LT_DECL([], [extract_expsyms_cmds], [2], - [The commands to extract the exported symbol list from a shared archive]) - -# -# Do we need to explicitly link libc? -# -case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_CACHE_CHECK([whether -lc should be explicitly linked in], - [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), - [$RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) - _LT_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no - else - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - ]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) - ;; - esac - fi - ;; -esac - -_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], - [Whether or not to add -lc for building shared libraries]) -_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], - [enable_shared_with_static_runtimes], [0], - [Whether or not to disallow shared libs when runtime libs are static]) -_LT_TAGDECL([], [export_dynamic_flag_spec], [1], - [Compiler flag to allow reflexive dlopens]) -_LT_TAGDECL([], [whole_archive_flag_spec], [1], - [Compiler flag to generate shared objects directly from archives]) -_LT_TAGDECL([], [compiler_needs_object], [1], - [Whether the compiler copes with passing no objects directly]) -_LT_TAGDECL([], [old_archive_from_new_cmds], [2], - [Create an old-style archive from a shared archive]) -_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], - [Create a temporary old-style archive to link instead of a shared archive]) -_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) -_LT_TAGDECL([], [archive_expsym_cmds], [2]) -_LT_TAGDECL([], [module_cmds], [2], - [Commands used to build a loadable module if different from building - a shared archive.]) -_LT_TAGDECL([], [module_expsym_cmds], [2]) -_LT_TAGDECL([], [with_gnu_ld], [1], - [Whether we are building with GNU ld or not]) -_LT_TAGDECL([], [allow_undefined_flag], [1], - [Flag that allows shared libraries with undefined symbols to be built]) -_LT_TAGDECL([], [no_undefined_flag], [1], - [Flag that enforces no undefined symbols]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], - [Flag to hardcode $libdir into a binary during linking. - This must work even if $libdir does not exist]) -_LT_TAGDECL([], [hardcode_libdir_separator], [1], - [Whether we need a single "-rpath" flag with a separated argument]) -_LT_TAGDECL([], [hardcode_direct], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary]) -_LT_TAGDECL([], [hardcode_direct_absolute], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary and the resulting library dependency is - "absolute", i.e impossible to change by setting ${shlibpath_var} if the - library is relocated]) -_LT_TAGDECL([], [hardcode_minus_L], [0], - [Set to "yes" if using the -LDIR flag during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_shlibpath_var], [0], - [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_automatic], [0], - [Set to "yes" if building a shared library automatically hardcodes DIR - into the library and all subsequent libraries and executables linked - against it]) -_LT_TAGDECL([], [inherit_rpath], [0], - [Set to yes if linker adds runtime paths of dependent libraries - to runtime path list]) -_LT_TAGDECL([], [link_all_deplibs], [0], - [Whether libtool must link a program against all its dependency libraries]) -_LT_TAGDECL([], [always_export_symbols], [0], - [Set to "yes" if exported symbols are required]) -_LT_TAGDECL([], [export_symbols_cmds], [2], - [The commands to list exported symbols]) -_LT_TAGDECL([], [exclude_expsyms], [1], - [Symbols that should not be listed in the preloaded symbols]) -_LT_TAGDECL([], [include_expsyms], [1], - [Symbols that must always be exported]) -_LT_TAGDECL([], [prelink_cmds], [2], - [Commands necessary for linking programs (against libraries) with templates]) -_LT_TAGDECL([], [postlink_cmds], [2], - [Commands necessary for finishing linking programs]) -_LT_TAGDECL([], [file_list_spec], [1], - [Specify filename containing input files]) -dnl FIXME: Not yet implemented -dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], -dnl [Compiler flag to generate thread safe objects]) -])# _LT_LINKER_SHLIBS - - -# _LT_LANG_C_CONFIG([TAG]) -# ------------------------ -# Ensure that the configuration variables for a C compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_C_CONFIG], -[m4_require([_LT_DECL_EGREP])dnl -lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - -_LT_TAG_COMPILER -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - LT_SYS_DLOPEN_SELF - _LT_CMD_STRIPLIB - - # Report which library types will actually be built - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_CONFIG($1) -fi -AC_LANG_POP -CC="$lt_save_CC" -])# _LT_LANG_C_CONFIG - - -# _LT_LANG_CXX_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a C++ compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_CXX_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_PROG_CXXCPP -else - _lt_caught_CXX_error=yes -fi - -AC_LANG_PUSH(C++) -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(compiler_needs_object, $1)=no -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the CXX compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_caught_CXX_error" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="int some_variable = 0;" - - # Code to be used in simple link tests - lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_CFLAGS=$CFLAGS - lt_save_LD=$LD - lt_save_GCC=$GCC - GCC=$GXX - lt_save_with_gnu_ld=$with_gnu_ld - lt_save_path_LD=$lt_cv_path_LD - if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx - else - $as_unset lt_cv_prog_gnu_ld - fi - if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX - else - $as_unset lt_cv_path_LD - fi - test -z "${LDCXX+set}" || LD=$LDCXX - CC=${CXX-"c++"} - CFLAGS=$CXXFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - # We don't want -fno-exception when compiling C++ code, so set the - # no_builtin_flag separately - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - else - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - fi - - if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - LT_PATH_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | - $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - GXX=no - with_gnu_ld=no - wlarc= - fi - - # PORTME: fill in a description of your system's C++ link characteristics - AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) - _LT_TAGVAR(ld_shlibs, $1)=yes - case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GXX" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to - # export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty - # executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared - # libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32* | cegcc*) - case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # g++ - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - freebsd2.*) - # C++ shared libraries reported to be fairly broken before - # switch to ELF - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - freebsd-elf*) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - hpux9*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' - fi - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc* | ecpc* ) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - case `$CC -V` in - *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) - _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' - _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' - _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - *) # Version 6 and above use weak symbols - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' - ;; - xl* | mpixl* | bgxl*) - # IBM XL 8.0 on PPC, with GNU ld - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - - lynxos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - m88k*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - - *nto* | *qnx*) - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - openbsd2*) - # C++ shared libraries are fairly broken - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd=func_echo_all - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - case $host in - osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; - esac - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - case $host in - osf3*) - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - ;; - *) - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - case $host in - osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - psos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - fi - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ - '"$_LT_TAGVAR(old_archive_cmds, $1)" - _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ - '"$_LT_TAGVAR(reload_cmds, $1)" - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - vxworks*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) - test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - - _LT_TAGVAR(GCC, $1)="$GXX" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS - LDCXX=$LD - LD=$lt_save_LD - GCC=$lt_save_GCC - with_gnu_ld=$lt_save_with_gnu_ld - lt_cv_path_LDCXX=$lt_cv_path_LD - lt_cv_path_LD=$lt_save_path_LD - lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld - lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test "$_lt_caught_CXX_error" != yes - -AC_LANG_POP -])# _LT_LANG_CXX_CONFIG - - -# _LT_FUNC_STRIPNAME_CNF -# ---------------------- -# func_stripname_cnf prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# -# This function is identical to the (non-XSI) version of func_stripname, -# except this one can be used by m4 code that may be executed by configure, -# rather than the libtool script. -m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl -AC_REQUIRE([_LT_DECL_SED]) -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) -func_stripname_cnf () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname_cnf -])# _LT_FUNC_STRIPNAME_CNF - -# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) -# --------------------------------- -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -m4_defun([_LT_SYS_HIDDEN_LIBDEPS], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl -# Dependencies to place before and after the object being linked: -_LT_TAGVAR(predep_objects, $1)= -_LT_TAGVAR(postdep_objects, $1)= -_LT_TAGVAR(predeps, $1)= -_LT_TAGVAR(postdeps, $1)= -_LT_TAGVAR(compiler_lib_search_path, $1)= - -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF -int a; -void foo (void) { a = 0; } -_LT_EOF -], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF -class Foo -{ -public: - Foo (void) { a = 0; } -private: - int a; -}; -_LT_EOF -], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer*4 a - a=0 - return - end -_LT_EOF -], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer a - a=0 - return - end -_LT_EOF -], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF -public class foo { - private int a; - public void bar (void) { - a = 0; - } -}; -_LT_EOF -], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF -package foo -func foo() { -} -_LT_EOF -]) - -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; -esac - -dnl Parse the compiler output and extract the necessary -dnl objects, libraries and library flags. -if AC_TRY_EVAL(ac_compile); then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" || - test $p = "-R"; then - prev=$p - continue - fi - - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac - if test "$pre_test_object_deps_done" = no; then - case ${prev} in - -L | -R) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" - else - _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$_LT_TAGVAR(postdeps, $1)"; then - _LT_TAGVAR(postdeps, $1)="${prev}${p}" - else - _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" - fi - fi - prev= - ;; - - *.lto.$objext) ;; # Ignore GCC LTO objects - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test "$pre_test_object_deps_done" = no; then - if test -z "$_LT_TAGVAR(predep_objects, $1)"; then - _LT_TAGVAR(predep_objects, $1)="$p" - else - _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" - fi - else - if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then - _LT_TAGVAR(postdep_objects, $1)="$p" - else - _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling $1 test program" -fi - -$RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS - -# PORTME: override above test on systems where it is broken -m4_if([$1], [CXX], -[case $host_os in -interix[[3-9]]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - _LT_TAGVAR(predep_objects,$1)= - _LT_TAGVAR(postdep_objects,$1)= - _LT_TAGVAR(postdeps,$1)= - ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC* | sunCC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; -esac -]) - -case " $_LT_TAGVAR(postdeps, $1) " in -*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; -esac - _LT_TAGVAR(compiler_lib_search_dirs, $1)= -if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then - _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -fi -_LT_TAGDECL([], [compiler_lib_search_dirs], [1], - [The directories searched by this compiler when creating a shared library]) -_LT_TAGDECL([], [predep_objects], [1], - [Dependencies to place before and after the objects being linked to - create a shared library]) -_LT_TAGDECL([], [postdep_objects], [1]) -_LT_TAGDECL([], [predeps], [1]) -_LT_TAGDECL([], [postdeps], [1]) -_LT_TAGDECL([], [compiler_lib_search_path], [1], - [The library search path used internally by the compiler when linking - a shared library]) -])# _LT_SYS_HIDDEN_LIBDEPS - - -# _LT_LANG_F77_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a Fortran 77 compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_F77_CONFIG], -[AC_LANG_PUSH(Fortran 77) -if test -z "$F77" || test "X$F77" = "Xno"; then - _lt_disable_F77=yes -fi - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the F77 compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_F77" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS - CC=${F77-"f77"} - CFLAGS=$FFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - GCC=$G77 - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$G77" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC="$lt_save_CC" - CFLAGS="$lt_save_CFLAGS" -fi # test "$_lt_disable_F77" != yes - -AC_LANG_POP -])# _LT_LANG_F77_CONFIG - - -# _LT_LANG_FC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for a Fortran compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_FC_CONFIG], -[AC_LANG_PUSH(Fortran) - -if test -z "$FC" || test "X$FC" = "Xno"; then - _lt_disable_FC=yes -fi - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for fc test sources. -ac_ext=${ac_fc_srcext-f} - -# Object file extension for compiled fc test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the FC compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_FC" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS - CC=${FC-"f95"} - CFLAGS=$FCFLAGS - compiler=$CC - GCC=$ac_cv_fc_compiler_gnu - - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS -fi # test "$_lt_disable_FC" != yes - -AC_LANG_POP -])# _LT_LANG_FC_CONFIG - - -# _LT_LANG_GCJ_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Java Compiler compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_GCJ_CONFIG], -[AC_REQUIRE([LT_PROG_GCJ])dnl -AC_LANG_SAVE - -# Source file extension for Java test sources. -ac_ext=java - -# Object file extension for compiled Java test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC=yes -CC=${GCJ-"gcj"} -CFLAGS=$GCJFLAGS -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" -_LT_CC_BASENAME([$compiler]) - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_GCJ_CONFIG - - -# _LT_LANG_GO_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Go compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_GO_CONFIG], -[AC_REQUIRE([LT_PROG_GO])dnl -AC_LANG_SAVE - -# Source file extension for Go test sources. -ac_ext=go - -# Object file extension for compiled Go test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="package main; func main() { }" - -# Code to be used in simple link tests -lt_simple_link_test_code='package main; func main() { }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC=yes -CC=${GOC-"gccgo"} -CFLAGS=$GOFLAGS -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" -_LT_CC_BASENAME([$compiler]) - -# Go did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_GO_CONFIG - - -# _LT_LANG_RC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for the Windows resource compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_RC_CONFIG], -[AC_REQUIRE([LT_PROG_RC])dnl -AC_LANG_SAVE - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC= -CC=${RC-"windres"} -CFLAGS= -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -if test -n "$compiler"; then - : - _LT_CONFIG($1) -fi - -GCC=$lt_save_GCC -AC_LANG_RESTORE -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_RC_CONFIG - - -# LT_PROG_GCJ -# ----------- -AC_DEFUN([LT_PROG_GCJ], -[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], - [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], - [AC_CHECK_TOOL(GCJ, gcj,) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS)])])[]dnl -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_GCJ], []) - - -# LT_PROG_GO -# ---------- -AC_DEFUN([LT_PROG_GO], -[AC_CHECK_TOOL(GOC, gccgo,) -]) - - -# LT_PROG_RC -# ---------- -AC_DEFUN([LT_PROG_RC], -[AC_CHECK_TOOL(RC, windres,) -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_RC], []) - - -# _LT_DECL_EGREP -# -------------- -# If we don't have a new enough Autoconf to choose the best grep -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_EGREP], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_REQUIRE([AC_PROG_FGREP])dnl -test -z "$GREP" && GREP=grep -_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) -_LT_DECL([], [EGREP], [1], [An ERE matcher]) -_LT_DECL([], [FGREP], [1], [A literal string matcher]) -dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too -AC_SUBST([GREP]) -]) - - -# _LT_DECL_OBJDUMP -# -------------- -# If we don't have a new enough Autoconf to choose the best objdump -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_OBJDUMP], -[AC_CHECK_TOOL(OBJDUMP, objdump, false) -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) -AC_SUBST([OBJDUMP]) -]) - -# _LT_DECL_DLLTOOL -# ---------------- -# Ensure DLLTOOL variable is set. -m4_defun([_LT_DECL_DLLTOOL], -[AC_CHECK_TOOL(DLLTOOL, dlltool, false) -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) -AC_SUBST([DLLTOOL]) -]) - -# _LT_DECL_SED -# ------------ -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -m4_defun([_LT_DECL_SED], -[AC_PROG_SED -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" -_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) -_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], - [Sed that helps us avoid accidentally triggering echo(1) options like -n]) -])# _LT_DECL_SED - -m4_ifndef([AC_PROG_SED], [ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # - -m4_defun([AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_SUBST([SED]) -AC_MSG_RESULT([$SED]) -])#AC_PROG_SED -])#m4_ifndef - -# Old name: -AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_SED], []) - - -# _LT_CHECK_SHELL_FEATURES -# ------------------------ -# Find out whether the shell is Bourne or XSI compatible, -# or has some other useful features. -m4_defun([_LT_CHECK_SHELL_FEATURES], -[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -AC_MSG_RESULT([$xsi_shell]) -_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) - -AC_MSG_CHECKING([whether the shell understands "+="]) -lt_shell_append=no -( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -AC_MSG_RESULT([$lt_shell_append]) -_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi -_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac -_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl -_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl -])# _LT_CHECK_SHELL_FEATURES - - -# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) -# ------------------------------------------------------ -# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and -# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. -m4_defun([_LT_PROG_FUNCTION_REPLACE], -[dnl { -sed -e '/^$1 ()$/,/^} # $1 /c\ -$1 ()\ -{\ -m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) -} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: -]) - - -# _LT_PROG_REPLACE_SHELLFNS -# ------------------------- -# Replace existing portable implementations of several shell functions with -# equivalent extended shell implementations where those features are available.. -m4_defun([_LT_PROG_REPLACE_SHELLFNS], -[if test x"$xsi_shell" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"}]) - - _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl - func_split_long_opt_name=${1%%=*} - func_split_long_opt_arg=${1#*=}]) - - _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl - func_split_short_opt_arg=${1#??} - func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) - - _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) - - _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) - - _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) -fi - -if test x"$lt_shell_append" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) - - _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl - func_quote_for_eval "${2}" -dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ - eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) -fi -]) - -# _LT_PATH_CONVERSION_FUNCTIONS -# ----------------------------- -# Determine which file name conversion functions should be used by -# func_to_host_file (and, implicitly, by func_to_host_path). These are needed -# for certain cross-compile configurations and native mingw. -m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_MSG_CHECKING([how to convert $build file names to $host format]) -AC_CACHE_VAL(lt_cv_to_host_file_cmd, -[case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac -]) -to_host_file_cmd=$lt_cv_to_host_file_cmd -AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) -_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], - [0], [convert $build file names to $host format])dnl - -AC_MSG_CHECKING([how to convert $build file names to toolchain format]) -AC_CACHE_VAL(lt_cv_to_tool_file_cmd, -[#assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac -]) -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) -_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], - [0], [convert $build files to toolchain format])dnl -])# _LT_PATH_CONVERSION_FUNCTIONS - -# Helper functions for option handling. -*- Autoconf -*- -# -# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 7 ltoptions.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) - - -# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) -# ------------------------------------------ -m4_define([_LT_MANGLE_OPTION], -[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) - - -# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) -# --------------------------------------- -# Set option OPTION-NAME for macro MACRO-NAME, and if there is a -# matching handler defined, dispatch to it. Other OPTION-NAMEs are -# saved as a flag. -m4_define([_LT_SET_OPTION], -[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl -m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), - _LT_MANGLE_DEFUN([$1], [$2]), - [m4_warning([Unknown $1 option `$2'])])[]dnl -]) - - -# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) -# ------------------------------------------------------------ -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -m4_define([_LT_IF_OPTION], -[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) - - -# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) -# ------------------------------------------------------- -# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME -# are set. -m4_define([_LT_UNLESS_OPTIONS], -[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), - [m4_define([$0_found])])])[]dnl -m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 -])[]dnl -]) - - -# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) -# ---------------------------------------- -# OPTION-LIST is a space-separated list of Libtool options associated -# with MACRO-NAME. If any OPTION has a matching handler declared with -# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about -# the unknown option and exit. -m4_defun([_LT_SET_OPTIONS], -[# Set options -m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [_LT_SET_OPTION([$1], _LT_Option)]) - -m4_if([$1],[LT_INIT],[ - dnl - dnl Simply set some default values (i.e off) if boolean options were not - dnl specified: - _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no - ]) - _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no - ]) - dnl - dnl If no reference was made to various pairs of opposing options, then - dnl we run the default mode handler for the pair. For example, if neither - dnl `shared' nor `disable-shared' was passed, we enable building of shared - dnl archives by default: - _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) - _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], - [_LT_ENABLE_FAST_INSTALL]) - ]) -])# _LT_SET_OPTIONS - - - -# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) -# ----------------------------------------- -m4_define([_LT_MANGLE_DEFUN], -[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) - - -# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) -# ----------------------------------------------- -m4_define([LT_OPTION_DEFINE], -[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl -])# LT_OPTION_DEFINE - - -# dlopen -# ------ -LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes -]) - -AU_DEFUN([AC_LIBTOOL_DLOPEN], -[_LT_SET_OPTION([LT_INIT], [dlopen]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `dlopen' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) - - -# win32-dll -# --------- -# Declare package support for building win32 dll's. -LT_OPTION_DEFINE([LT_INIT], [win32-dll], -[enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -esac - -test -z "$AS" && AS=as -_LT_DECL([], [AS], [1], [Assembler program])dnl - -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl - -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl -])# win32-dll - -AU_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -_LT_SET_OPTION([LT_INIT], [win32-dll]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `win32-dll' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) - - -# _LT_ENABLE_SHARED([DEFAULT]) -# ---------------------------- -# implement the --enable-shared flag, and supports the `shared' and -# `disable-shared' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_SHARED], -[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([shared], - [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) - - _LT_DECL([build_libtool_libs], [enable_shared], [0], - [Whether or not to build shared libraries]) -])# _LT_ENABLE_SHARED - -LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) -]) - -AC_DEFUN([AC_DISABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], [disable-shared]) -]) - -AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_SHARED], []) -dnl AC_DEFUN([AM_DISABLE_SHARED], []) - - - -# _LT_ENABLE_STATIC([DEFAULT]) -# ---------------------------- -# implement the --enable-static flag, and support the `static' and -# `disable-static' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_STATIC], -[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([static], - [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]_LT_ENABLE_STATIC_DEFAULT) - - _LT_DECL([build_old_libs], [enable_static], [0], - [Whether or not to build static libraries]) -])# _LT_ENABLE_STATIC - -LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) -]) - -AC_DEFUN([AC_DISABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], [disable-static]) -]) - -AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_STATIC], []) -dnl AC_DEFUN([AM_DISABLE_STATIC], []) - - - -# _LT_ENABLE_FAST_INSTALL([DEFAULT]) -# ---------------------------------- -# implement the --enable-fast-install flag, and support the `fast-install' -# and `disable-fast-install' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_FAST_INSTALL], -[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([fast-install], - [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) - -_LT_DECL([fast_install], [enable_fast_install], [0], - [Whether or not to optimize for fast installation])dnl -])# _LT_ENABLE_FAST_INSTALL - -LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) - -# Old names: -AU_DEFUN([AC_ENABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `fast-install' option into LT_INIT's first parameter.]) -]) - -AU_DEFUN([AC_DISABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `disable-fast-install' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) -dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) - - -# _LT_WITH_PIC([MODE]) -# -------------------- -# implement the --with-pic flag, and support the `pic-only' and `no-pic' -# LT_INIT options. -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -m4_define([_LT_WITH_PIC], -[AC_ARG_WITH([pic], - [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for lt_pkg in $withval; do - IFS="$lt_save_ifs" - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [pic_mode=default]) - -test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) - -_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl -])# _LT_WITH_PIC - -LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) - -# Old name: -AU_DEFUN([AC_LIBTOOL_PICMODE], -[_LT_SET_OPTION([LT_INIT], [pic-only]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `pic-only' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) - - -m4_define([_LTDL_MODE], []) -LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], - [m4_define([_LTDL_MODE], [nonrecursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [recursive], - [m4_define([_LTDL_MODE], [recursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [subproject], - [m4_define([_LTDL_MODE], [subproject])]) - -m4_define([_LTDL_TYPE], []) -LT_OPTION_DEFINE([LTDL_INIT], [installable], - [m4_define([_LTDL_TYPE], [installable])]) -LT_OPTION_DEFINE([LTDL_INIT], [convenience], - [m4_define([_LTDL_TYPE], [convenience])]) - -# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltsugar.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) - - -# lt_join(SEP, ARG1, [ARG2...]) -# ----------------------------- -# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their -# associated separator. -# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier -# versions in m4sugar had bugs. -m4_define([lt_join], -[m4_if([$#], [1], [], - [$#], [2], [[$2]], - [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) -m4_define([_lt_join], -[m4_if([$#$2], [2], [], - [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) - - -# lt_car(LIST) -# lt_cdr(LIST) -# ------------ -# Manipulate m4 lists. -# These macros are necessary as long as will still need to support -# Autoconf-2.59 which quotes differently. -m4_define([lt_car], [[$1]]) -m4_define([lt_cdr], -[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], - [$#], 1, [], - [m4_dquote(m4_shift($@))])]) -m4_define([lt_unquote], $1) - - -# lt_append(MACRO-NAME, STRING, [SEPARATOR]) -# ------------------------------------------ -# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. -# Note that neither SEPARATOR nor STRING are expanded; they are appended -# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). -# No SEPARATOR is output if MACRO-NAME was previously undefined (different -# than defined and empty). -# -# This macro is needed until we can rely on Autoconf 2.62, since earlier -# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. -m4_define([lt_append], -[m4_define([$1], - m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) - - - -# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) -# ---------------------------------------------------------- -# Produce a SEP delimited list of all paired combinations of elements of -# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list -# has the form PREFIXmINFIXSUFFIXn. -# Needed until we can rely on m4_combine added in Autoconf 2.62. -m4_define([lt_combine], -[m4_if(m4_eval([$# > 3]), [1], - [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl -[[m4_foreach([_Lt_prefix], [$2], - [m4_foreach([_Lt_suffix], - ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, - [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) - - -# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) -# ----------------------------------------------------------------------- -# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited -# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. -m4_define([lt_if_append_uniq], -[m4_ifdef([$1], - [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], - [lt_append([$1], [$2], [$3])$4], - [$5])], - [lt_append([$1], [$2], [$3])$4])]) - - -# lt_dict_add(DICT, KEY, VALUE) -# ----------------------------- -m4_define([lt_dict_add], -[m4_define([$1($2)], [$3])]) - - -# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) -# -------------------------------------------- -m4_define([lt_dict_add_subkey], -[m4_define([$1($2:$3)], [$4])]) - - -# lt_dict_fetch(DICT, KEY, [SUBKEY]) -# ---------------------------------- -m4_define([lt_dict_fetch], -[m4_ifval([$3], - m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), - m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) - - -# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) -# ----------------------------------------------------------------- -m4_define([lt_if_dict_fetch], -[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], - [$5], - [$6])]) - - -# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) -# -------------------------------------------------------------- -m4_define([lt_dict_filter], -[m4_if([$5], [], [], - [lt_join(m4_quote(m4_default([$4], [[, ]])), - lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), - [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl -]) - -# ltversion.m4 -- version numbers -*- Autoconf -*- -# -# Copyright (C) 2004 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# @configure_input@ - -# serial 3337 ltversion.m4 -# This file is part of GNU Libtool - -m4_define([LT_PACKAGE_VERSION], [2.4.2]) -m4_define([LT_PACKAGE_REVISION], [1.3337]) - -AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.4.2' -macro_revision='1.3337' -_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) -_LT_DECL(, macro_revision, 0) -]) - -# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004. -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 5 lt~obsolete.m4 - -# These exist entirely to fool aclocal when bootstrapping libtool. -# -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) -# which have later been changed to m4_define as they aren't part of the -# exported API, or moved to Autoconf or Automake where they belong. -# -# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -# using a macro with the same name in our local m4/libtool.m4 it'll -# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -# and doesn't know about Autoconf macros at all.) -# -# So we provide this file, which has a silly filename so it's always -# included after everything else. This provides aclocal with the -# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -# because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. -# -# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -# Yes, that means every name once taken will need to remain here until -# we give up compatibility with versions before 1.7, at which point -# we need to keep only those names which we still refer to. - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) - -m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) -m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) -m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) -m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) -m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) -m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) -m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) -m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) -m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) -m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) -m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) -m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) -m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) -m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) -m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) -m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) -m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) -m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) -m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) -m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) -m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) -m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) -m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) -m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) -m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) -m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) -m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) -m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) -m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) -m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) -m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) -m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) -m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) -m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) -m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) -m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) -m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) -m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) -m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) -m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) -m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) -m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) -m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) -m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) -m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) -m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) -m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) -m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) -m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) - -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# serial 1 (pkg-config-0.24) -# -# Copyright © 2004 Scott James Remnant . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# PKG_PROG_PKG_CONFIG([MIN-VERSION]) -# ---------------------------------- -AC_DEFUN([PKG_PROG_PKG_CONFIG], -[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) -m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) -AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) -AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) -AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=m4_default([$1], [0.9.0]) - AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - PKG_CONFIG="" - fi -fi[]dnl -])# PKG_PROG_PKG_CONFIG - -# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# -# Check to see whether a particular set of modules exists. Similar -# to PKG_CHECK_MODULES(), but does not set variables or print errors. -# -# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -# only at the first occurence in configure.ac, so if the first place -# it's called might be skipped (such as if it is within an "if", you -# have to call PKG_CHECK_EXISTS manually -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_EXISTS], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -if test -n "$PKG_CONFIG" && \ - AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then - m4_default([$2], [:]) -m4_ifvaln([$3], [else - $3])dnl -fi]) - -# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -# --------------------------------------------- -m4_define([_PKG_CONFIG], -[if test -n "$$1"; then - pkg_cv_[]$1="$$1" - elif test -n "$PKG_CONFIG"; then - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes ], - [pkg_failed=yes]) - else - pkg_failed=untried -fi[]dnl -])# _PKG_CONFIG - -# _PKG_SHORT_ERRORS_SUPPORTED -# ----------------------------- -AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi[]dnl -])# _PKG_SHORT_ERRORS_SUPPORTED - - -# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -# [ACTION-IF-NOT-FOUND]) -# -# -# Note that if there is a possibility the first call to -# PKG_CHECK_MODULES might not happen, you should be sure to include an -# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -# -# -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_MODULES], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl -AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl - -pkg_failed=no -AC_MSG_CHECKING([for $1]) - -_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) -_PKG_CONFIG([$1][_LIBS], [libs], [$2]) - -m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS -and $1[]_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details.]) - -if test $pkg_failed = yes; then - AC_MSG_RESULT([no]) - _PKG_SHORT_ERRORS_SUPPORTED - if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` - else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - - m4_default([$4], [AC_MSG_ERROR( -[Package requirements ($2) were not met: - -$$1_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -_PKG_TEXT])[]dnl - ]) -elif test $pkg_failed = untried; then - AC_MSG_RESULT([no]) - m4_default([$4], [AC_MSG_FAILURE( -[The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -_PKG_TEXT - -To get pkg-config, see .])[]dnl - ]) -else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS - AC_MSG_RESULT([yes]) - $3 -fi[]dnl -])# PKG_CHECK_MODULES - - -# PKG_INSTALLDIR(DIRECTORY) -# ------------------------- -# Substitutes the variable pkgconfigdir as the location where a module -# should install pkg-config .pc files. By default the directory is -# $libdir/pkgconfig, but the default can be changed by passing -# DIRECTORY. The user can override through the --with-pkgconfigdir -# parameter. -AC_DEFUN([PKG_INSTALLDIR], -[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) -m4_pushdef([pkg_description], - [pkg-config installation directory @<:@]pkg_default[@:>@]) -AC_ARG_WITH([pkgconfigdir], - [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, - [with_pkgconfigdir=]pkg_default) -AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) -m4_popdef([pkg_default]) -m4_popdef([pkg_description]) -]) dnl PKG_INSTALLDIR - - -# PKG_NOARCH_INSTALLDIR(DIRECTORY) -# ------------------------- -# Substitutes the variable noarch_pkgconfigdir as the location where a -# module should install arch-independent pkg-config .pc files. By -# default the directory is $datadir/pkgconfig, but the default can be -# changed by passing DIRECTORY. The user can override through the -# --with-noarch-pkgconfigdir parameter. -AC_DEFUN([PKG_NOARCH_INSTALLDIR], -[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) -m4_pushdef([pkg_description], - [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) -AC_ARG_WITH([noarch-pkgconfigdir], - [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, - [with_noarch_pkgconfigdir=]pkg_default) -AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) -m4_popdef([pkg_default]) -m4_popdef([pkg_description]) -]) dnl PKG_NOARCH_INSTALLDIR - - -# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, -# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# ------------------------------------------- -# Retrieves the value of the pkg-config variable for the given module. -AC_DEFUN([PKG_CHECK_VAR], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl - -_PKG_CONFIG([$1], [variable="][$3]["], [$2]) -AS_VAR_COPY([$1], [pkg_cv_][$1]) - -AS_VAR_IF([$1], [""], [$5], [$4])dnl -])# PKG_CHECK_VAR - -# Copyright (C) 2002-2013 Free Software Foundation, Inc. +# Copyright (C) 2002-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -8849,10 +32,10 @@ # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.14' +[am__api_version='1.15' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.14.1], [], +m4_if([$1], [1.15], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -8868,14 +51,14 @@ # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.14.1])dnl +[AM_AUTOMAKE_VERSION([1.15])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -8920,15 +103,14 @@ # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` +[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# Copyright (C) 1997-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -8959,7 +141,7 @@ Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9150,7 +332,7 @@ # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9226,7 +408,7 @@ # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9316,8 +498,8 @@ # # AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl @@ -9391,6 +573,9 @@ AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) fi fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. ]) dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not @@ -9420,7 +605,7 @@ done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9431,7 +616,7 @@ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -9441,7 +626,7 @@ fi AC_SUBST([install_sh])]) -# Copyright (C) 2003-2013 Free Software Foundation, Inc. +# Copyright (C) 2003-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9463,7 +648,7 @@ # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9498,7 +683,7 @@ # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9548,7 +733,7 @@ # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# Copyright (C) 1997-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9585,38 +770,9 @@ fi ]) -# -*- Autoconf -*- -# Obsolete and "removed" macros, that must however still report explicit -# error messages when used, to smooth transition. -# -# Copyright (C) 1996-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -AC_DEFUN([AM_CONFIG_HEADER], -[AC_DIAGNOSE([obsolete], -['$0': this macro is obsolete. -You should use the 'AC][_CONFIG_HEADERS' macro instead.])dnl -AC_CONFIG_HEADERS($@)]) - -AC_DEFUN([AM_PROG_CC_STDC], -[AC_PROG_CC -am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc -AC_DIAGNOSE([obsolete], -['$0': this macro is obsolete. -You should simply use the 'AC][_PROG_CC' macro instead. -Also, your code should no longer depend upon 'am_cv_prog_cc_stdc', -but upon 'ac_cv_prog_cc_stdc'.])]) - -AC_DEFUN([AM_C_PROTOTYPES], - [AC_FATAL([automatic de-ANSI-fication support has been removed])]) -AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES]) - # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9645,7 +801,7 @@ AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9692,7 +848,7 @@ # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9711,7 +867,7 @@ # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9792,7 +948,7 @@ rm -f conftest.file ]) -# Copyright (C) 2009-2013 Free Software Foundation, Inc. +# Copyright (C) 2009-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9852,7 +1008,7 @@ _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) -# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# Copyright (C) 2001-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9880,7 +1036,7 @@ INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006-2013 Free Software Foundation, Inc. +# Copyright (C) 2006-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9899,7 +1055,7 @@ # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004-2013 Free Software Foundation, Inc. +# Copyright (C) 2004-2014 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10030,4 +1186,10 @@ AC_SUBST([am__untar]) ]) # _AM_PROG_TAR -m4_include([acinclude.m4]) +m4_include([m4/add_cflags.m4]) +m4_include([m4/libtool.m4]) +m4_include([m4/ltoptions.m4]) +m4_include([m4/ltsugar.m4]) +m4_include([m4/ltversion.m4]) +m4_include([m4/lt~obsolete.m4]) +m4_include([m4/pkg.m4]) diff -Nru speex-1.2~rc1.2/autogen.sh speex-1.2.0/autogen.sh --- speex-1.2~rc1.2/autogen.sh 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/autogen.sh 1970-01-01 00:00:00.000000000 +0000 @@ -1,11 +0,0 @@ -#!/bin/sh -# Run this to set up the build system: configure, makefiles, etc. -set -e - -srcdir=`dirname $0` -test -n "$srcdir" && cd "$srcdir" - -echo "Updating build configuration files, please wait...." - -autoreconf -if - diff -Nru speex-1.2~rc1.2/compile speex-1.2.0/compile --- speex-1.2~rc1.2/compile 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/compile 2016-12-07 19:52:53.000000000 +0000 @@ -3,7 +3,7 @@ scriptversion=2012-10-14.11; # UTC -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify diff -Nru speex-1.2~rc1.2/config.guess speex-1.2.0/config.guess --- speex-1.2~rc1.2/config.guess 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/config.guess 2016-12-07 19:52:53.000000000 +0000 @@ -1,8 +1,8 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright 1992-2014 Free Software Foundation, Inc. +# Copyright 1992-2015 Free Software Foundation, Inc. -timestamp='2014-03-23' +timestamp='2015-08-20' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -24,12 +24,12 @@ # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # -# Originally written by Per Bothner. +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. # # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD # -# Please send patches with a ChangeLog entry to config-patches@gnu.org. +# Please send patches to . me=`echo "$0" | sed -e 's,.*/,,'` @@ -50,7 +50,7 @@ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright 1992-2014 Free Software Foundation, Inc. +Copyright 1992-2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -168,20 +168,27 @@ # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ + /sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || \ + echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; + earmv*) + arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'` + endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'` + machine=${arch}${endian}-unknown + ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) + arm*|earm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ @@ -197,6 +204,13 @@ os=netbsd ;; esac + # Determine ABI tags. + case "${UNAME_MACHINE_ARCH}" in + earm*) + expr='s/^earmv[0-9]/-eabi/;s/eb$//' + abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"` + ;; + esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need @@ -207,13 +221,13 @@ release='-gnu' ;; *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" + echo "${machine}-${os}${release}${abi}" exit ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` @@ -235,6 +249,9 @@ *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; + *:Sortix:*:*) + echo ${UNAME_MACHINE}-unknown-sortix + exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) @@ -579,8 +596,9 @@ else IBM_ARCH=powerpc fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` + if [ -x /usr/bin/lslpp ] ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi @@ -932,6 +950,9 @@ crisv32:Linux:*:*) echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; + e2k:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; frv:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; @@ -1020,7 +1041,7 @@ echo ${UNAME_MACHINE}-dec-linux-${LIBC} exit ;; x86_64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-pc-linux-${LIBC} exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-${LIBC} diff -Nru speex-1.2~rc1.2/config.h.in speex-1.2.0/config.h.in --- speex-1.2~rc1.2/config.h.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/config.h.in 2016-12-07 23:21:08.000000000 +0000 @@ -48,12 +48,6 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H -/* Define to 1 if you have the `m' library (-lm). */ -#undef HAVE_LIBM - -/* Define to 1 if you have the `winmm' library (-lwinmm). */ -#undef HAVE_LIBWINMM - /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H @@ -84,8 +78,7 @@ /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H -/* Define to the sub-directory in which libtool stores uninstalled libraries. - */ +/* Define to the sub-directory where libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Define to the address where bug reports for this package should be sent. */ @@ -109,12 +102,30 @@ /* The size of `int', as computed by sizeof. */ #undef SIZEOF_INT +/* The size of `int16_t', as computed by sizeof. */ +#undef SIZEOF_INT16_T + +/* The size of `int32_t', as computed by sizeof. */ +#undef SIZEOF_INT32_T + /* The size of `long', as computed by sizeof. */ #undef SIZEOF_LONG /* The size of `short', as computed by sizeof. */ #undef SIZEOF_SHORT +/* The size of `uint16_t', as computed by sizeof. */ +#undef SIZEOF_UINT16_T + +/* The size of `uint32_t', as computed by sizeof. */ +#undef SIZEOF_UINT32_T + +/* The size of `u_int16_t', as computed by sizeof. */ +#undef SIZEOF_U_INT16_T + +/* The size of `u_int32_t', as computed by sizeof. */ +#undef SIZEOF_U_INT32_T + /* Version extra */ #undef SPEEX_EXTRA_VERSION @@ -151,9 +162,15 @@ /* Use FFT from OggVorbis */ #undef USE_SMALLFT +/* Use SpeexDSP library */ +#undef USE_SPEEXDSP + /* Use C99 variable-size arrays */ #undef VAR_ARRAYS +/* Enable support for the Vorbis psy model */ +#undef VORBIS_PSYCHO + /* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel). */ #if defined AC_APPLE_UNIVERSAL_BUILD diff -Nru speex-1.2~rc1.2/config.sub speex-1.2.0/config.sub --- speex-1.2~rc1.2/config.sub 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/config.sub 2016-12-07 19:52:53.000000000 +0000 @@ -1,8 +1,8 @@ #! /bin/sh # Configuration validation subroutine script. -# Copyright 1992-2014 Free Software Foundation, Inc. +# Copyright 1992-2015 Free Software Foundation, Inc. -timestamp='2014-05-01' +timestamp='2015-08-20' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -25,7 +25,7 @@ # of the GNU General Public License, version 3 ("GPLv3"). -# Please send patches with a ChangeLog entry to config-patches@gnu.org. +# Please send patches to . # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. @@ -68,7 +68,7 @@ version="\ GNU config.sub ($timestamp) -Copyright 1992-2014 Free Software Foundation, Inc. +Copyright 1992-2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -117,7 +117,7 @@ case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ - knetbsd*-gnu* | netbsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ kopensolaris*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os @@ -255,12 +255,13 @@ | arc | arceb \ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ | avr | avr32 \ + | ba \ | be32 | be64 \ | bfin \ | c4x | c8051 | clipper \ | d10v | d30v | dlx | dsp16xx \ - | epiphany \ - | fido | fr30 | frv \ + | e2k | epiphany \ + | fido | fr30 | frv | ft32 \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | hexagon \ | i370 | i860 | i960 | ia64 \ @@ -302,9 +303,10 @@ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle \ | pyramid \ + | riscv32 | riscv64 \ | rl78 | rx \ | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ @@ -312,6 +314,7 @@ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | visium \ | we32k \ | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) @@ -326,6 +329,9 @@ c6x) basic_machine=tic6x-unknown ;; + leon|leon[3-9]) + basic_machine=sparc-$basic_machine + ;; m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) basic_machine=$basic_machine-unknown os=-none @@ -371,12 +377,13 @@ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ + | ba-* \ | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | c8051-* | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ + | e2k-* | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ @@ -423,12 +430,13 @@ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ | pyramid-* \ + | riscv32-* | riscv64-* \ | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile*-* \ @@ -436,6 +444,7 @@ | ubicom32-* \ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ | vax-* \ + | visium-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ @@ -512,6 +521,9 @@ basic_machine=i386-pc os=-aros ;; + asmjs) + basic_machine=asmjs-unknown + ;; aux) basic_machine=m68k-apple os=-aux @@ -773,6 +785,9 @@ basic_machine=m68k-isi os=-sysv ;; + leon-*|leon[3-9]-*) + basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'` + ;; m68knommu) basic_machine=m68k-unknown os=-linux @@ -828,6 +843,10 @@ basic_machine=powerpc-unknown os=-morphos ;; + moxiebox) + basic_machine=moxie-unknown + os=-moxiebox + ;; msdos) basic_machine=i386-pc os=-msdos @@ -1360,7 +1379,7 @@ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* \ + | -aos* | -aros* | -cloudabi* | -sortix* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ @@ -1373,7 +1392,7 @@ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ | -linux-newlib* | -linux-musl* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* \ + | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ diff -Nru speex-1.2~rc1.2/configure speex-1.2.0/configure --- speex-1.2~rc1.2/configure 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/configure 2016-12-07 23:21:04.000000000 +0000 @@ -1,6 +1,8 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69. +# Generated by GNU Autoconf 2.69 for speex 1.2.0. +# +# Report bugs to . # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. @@ -272,10 +274,11 @@ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else - $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, -$0: including any error possibly output before this -$0: message. Then install a modern shell, or manually run -$0: the script under such a shell if you do have one." + $as_echo "$0: Please tell bug-autoconf@gnu.org and speex-dev@xiph.org +$0: about your system, including any error possibly output +$0: before this message. Then install a modern shell, or +$0: manually run the script under such a shell if you do +$0: have one." fi exit 1 fi @@ -585,12 +588,12 @@ MAKEFLAGS= # Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= -PACKAGE_URL= +PACKAGE_NAME='speex' +PACKAGE_TARNAME='speex' +PACKAGE_VERSION='1.2.0' +PACKAGE_STRING='speex 1.2.0' +PACKAGE_BUGREPORT='speex-dev@xiph.org' +PACKAGE_URL='' ac_unique_file="libspeex/speex.c" # Factoring default headers for most tests. @@ -632,8 +635,15 @@ ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS +INCLUDE_STDINT +USIZE32 SIZE32 +USIZE16 SIZE16 +SPEEXDSP_LIBS +SPEEXDSP_CFLAGS +BUILD_VORBIS_PSY_FALSE +BUILD_VORBIS_PSY_TRUE FFT_PKGCONFIG BUILD_SMALLFT_FALSE BUILD_SMALLFT_TRUE @@ -641,14 +651,19 @@ BUILD_KISS_FFT_TRUE FFT_LIBS FFT_CFLAGS +WINMM_LIBS +OGG_LIBS +OGG_CFLAGS PKG_CONFIG_LIBDIR PKG_CONFIG_PATH PKG_CONFIG +BUILD_BINARIES_FALSE +BUILD_BINARIES_TRUE +SPEEX_VERSION LIBOBJS -src -OGG_LIBS -OGG_CFLAGS +LIBM CPP +LT_SYS_LIBRARY_PATH OTOOL64 OTOOL LIPO @@ -699,10 +714,6 @@ MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -AM_DEFAULT_V -AM_V am__untar am__tar AMTAR @@ -726,10 +737,13 @@ INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM -SPEEX_VERSION SPEEX_LT_AGE SPEEX_LT_REVISION SPEEX_LT_CURRENT +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V target_alias host_alias build_alias @@ -749,6 +763,7 @@ docdir oldincludedir includedir +runstatedir localstatedir sharedstatedir sysconfdir @@ -777,24 +792,23 @@ enable_static with_pic enable_fast_install +with_aix_soname enable_dependency_tracking with_gnu_ld with_sysroot enable_libtool_lock -with_ogg -with_ogg_libraries -with_ogg_includes -enable_oggtest enable_valgrind enable_sse enable_fixed_point enable_float_api +enable_binaries enable_vbr enable_arm4_asm enable_arm5e_asm enable_blackfin_asm enable_fixed_point_debug enable_ti_c55x +enable_vorbis_psy with_fft ' ac_precious_vars='build_alias @@ -805,12 +819,17 @@ LDFLAGS LIBS CPPFLAGS +LT_SYS_LIBRARY_PATH CPP PKG_CONFIG PKG_CONFIG_PATH PKG_CONFIG_LIBDIR +OGG_CFLAGS +OGG_LIBS FFT_CFLAGS -FFT_LIBS' +FFT_LIBS +SPEEXDSP_CFLAGS +SPEEXDSP_LIBS' # Initialize some variables set by options. @@ -849,9 +868,10 @@ sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' +runstatedir='${localstatedir}/run' includedir='${prefix}/include' oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE}' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' @@ -1101,6 +1121,15 @@ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; + -runstatedir | --runstatedir | --runstatedi | --runstated \ + | --runstate | --runstat | --runsta | --runst | --runs \ + | --run | --ru | --r) + ac_prev=runstatedir ;; + -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ + | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ + | --run=* | --ru=* | --r=*) + runstatedir=$ac_optarg ;; + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ @@ -1238,7 +1267,7 @@ for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir + libdir localedir mandir runstatedir do eval ac_val=\$$ac_var # Remove trailing slashes. @@ -1351,7 +1380,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures this package to adapt to many kinds of systems. +\`configure' configures speex 1.2.0 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1391,6 +1420,7 @@ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] @@ -1399,7 +1429,7 @@ --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] + --docdir=DIR documentation root [DATAROOTDIR/doc/speex] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] @@ -1420,7 +1450,9 @@ fi if test -n "$ac_init_help"; then - + case $ac_init_help in + short | recursive ) echo "Configuration of speex 1.2.0:";; + esac cat <<\_ACEOF Optional Features: @@ -1429,8 +1461,8 @@ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-silent-rules less verbose build output (undo: "make V=1") --disable-silent-rules verbose build output (undo: "make V=0") - --enable-maintainer-mode - enable make rules and dependencies not useful (and + --disable-maintainer-mode + disable make rules and dependencies not useful (and sometimes confusing) to the casual installer --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] @@ -1441,29 +1473,30 @@ --disable-dependency-tracking speeds up one-time build --disable-libtool-lock avoid locking (might break parallel builds) - --disable-oggtest Do not try to compile and run a test Ogg program --enable-valgrind Enable valgrind extra checks --enable-sse Enable SSE support --enable-fixed-point Compile as fixed-point --disable-float-api Disable the floating-point API + --disable-binaries Do not build the encoder and decoder programs, only the library --disable-vbr Disable VBR and VAD from the codec --enable-arm4-asm Make use of ARM4 assembly optimizations --enable-arm5e-asm Make use of ARM5E assembly optimizations --enable-blackfin-asm Make use of Blackfin assembly optimizations --enable-fixed-point-debug Debug fixed-point implementation --enable-ti-c55x Enable support for TI C55X DSP + --enable-vorbis-psy Enable the Vorbis psy model Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] + --with-aix-soname=aix|svr4|both + shared library versioning (aka "SONAME") variant to + provide on AIX, [default=aix]. --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-sysroot=DIR Search for dependent libraries within DIR - (or the compiler's sysroot if not specified). - --with-ogg=PFX Prefix where libogg is installed (optional) - --with-ogg-libraries=DIR Directory where libogg library is installed (optional) - --with-ogg-includes=DIR Directory where libogg header files are installed (optional) + --with-sysroot[=DIR] Search for dependent libraries within DIR (or the + compiler's sysroot if not specified). --with-fft=choice use an alternate FFT implementation. The available choices are kiss (default fixed point), smallft (default floating point), gpl-fftw3 and @@ -1477,19 +1510,27 @@ LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory + LT_SYS_LIBRARY_PATH + User-defined run-time library search path. CPP C preprocessor PKG_CONFIG path to pkg-config utility PKG_CONFIG_PATH directories to add to pkg-config's search path PKG_CONFIG_LIBDIR path overriding pkg-config's built-in search path + OGG_CFLAGS C compiler flags for OGG, overriding pkg-config + OGG_LIBS linker flags for OGG, overriding pkg-config FFT_CFLAGS C compiler flags for FFT, overriding pkg-config FFT_LIBS linker flags for FFT, overriding pkg-config + SPEEXDSP_CFLAGS + C compiler flags for SPEEXDSP, overriding pkg-config + SPEEXDSP_LIBS + linker flags for SPEEXDSP, overriding pkg-config Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. -Report bugs to the package provider. +Report bugs to . _ACEOF ac_status=$? fi @@ -1552,7 +1593,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -configure +speex configure 1.2.0 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. @@ -1897,6 +1938,10 @@ $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( $as_echo "## --------------------------------- ## +## Report this to speex-dev@xiph.org ## +## --------------------------------- ##" + ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 @@ -2100,7 +2145,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by $as_me, which was +It was created by speex $as_me 1.2.0, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2449,32 +2494,65 @@ -ac_config_headers="$ac_config_headers config.h" + + + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=0;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + SPEEX_MAJOR_VERSION=1 SPEEX_MINOR_VERSION=1 SPEEX_MICRO_VERSION=16 SPEEX_EXTRA_VERSION= -#SPEEX_VERSION= -#SPEEX_VERSION=$SPEEX_MAJOR_VERSION.$SPEEX_MINOR_VERSION.$SPEEX_MICRO_VERSION$SPEEX_EXTRA_VERSION -SPEEX_VERSION="1.2rc1" SPEEX_LT_CURRENT=6 -SPEEX_LT_REVISION=0 +SPEEX_LT_REVISION=1 SPEEX_LT_AGE=5 -# For automake. -VERSION=$SPEEX_VERSION -PACKAGE=speex - - -am__api_version='1.14' +am__api_version='1.15' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do @@ -2675,8 +2753,8 @@ ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in @@ -2695,7 +2773,7 @@ $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -2928,45 +3006,6 @@ fi rmdir .tst 2>/dev/null -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=1;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." @@ -2988,9 +3027,8 @@ # Define the identity of the package. - - PACKAGE=$PACKAGE - VERSION=$VERSION + PACKAGE='speex' + VERSION='1.2.0' # Some tools Automake needs. @@ -3015,8 +3053,8 @@ # mkdir_p='$(MKDIR_P)' -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. # Always define AMTAR for backward compatibility. Yes, it's still used # in the wild :-( We should find a proper way to deprecate it ... AMTAR='$${TAR-tar}' @@ -3081,7 +3119,7 @@ if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else - USE_MAINTAINER_MODE=no + USE_MAINTAINER_MODE=yes fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 @@ -3480,8 +3518,8 @@ -macro_version='2.4.2' -macro_revision='1.3337' +macro_version='2.4.6' +macro_revision='2.4.6' @@ -3495,7 +3533,7 @@ -ltmain="$ac_aux_dir/ltmain.sh" +ltmain=$ac_aux_dir/ltmain.sh # Backslashify metacharacters that are still active within # double-quoted strings. @@ -3544,7 +3582,7 @@ $ECHO "" } -case "$ECHO" in +case $ECHO in printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 $as_echo "printf" >&6; } ;; print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 @@ -4906,19 +4944,19 @@ # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld -if test "$GCC" = yes; then +if test yes = "$GCC"; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw + # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; @@ -4932,7 +4970,7 @@ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done - test -z "$LD" && LD="$ac_prog" + test -z "$LD" && LD=$ac_prog ;; "") # If it fails, then pretend we aren't using GCC. @@ -4943,7 +4981,7 @@ with_gnu_ld=unknown ;; esac -elif test "$with_gnu_ld" = yes; then +elif test yes = "$with_gnu_ld"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else @@ -4954,32 +4992,32 @@ $as_echo_n "(cached) " >&6 else if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD=$ac_dir/$ac_prog # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } @@ -5022,33 +5060,38 @@ else if test -n "$NM"; then # Let the user override the test. - lt_cv_path_NM="$NM" + lt_cv_path_NM=$NM else - lt_nm_to_check="${ac_tool_prefix}nm" + lt_nm_to_check=${ac_tool_prefix}nm if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" - break + break 2 ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" - break + break 2 ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but @@ -5059,15 +5102,15 @@ esac fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$DUMPBIN"; then : @@ -5173,9 +5216,9 @@ fi fi - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) - DUMPBIN="$DUMPBIN -symbols" + DUMPBIN="$DUMPBIN -symbols -headers" ;; *) DUMPBIN=: @@ -5183,8 +5226,8 @@ esac fi - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" + if test : != "$DUMPBIN"; then + NM=$DUMPBIN fi fi test -z "$NM" && NM=nm @@ -5235,7 +5278,7 @@ $as_echo_n "(cached) " >&6 else i=0 - teststring="ABCD" + teststring=ABCD case $build_os in msdosdjgpp*) @@ -5275,7 +5318,7 @@ lt_cv_sys_max_cmd_len=8192; ;; - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` @@ -5326,22 +5369,22 @@ *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then + test undefined != "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do + for i in 1 2 3 4 5 6 7 8; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough + test 17 != "$i" # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring @@ -5359,7 +5402,7 @@ fi -if test -n $lt_cv_sys_max_cmd_len ; then +if test -n "$lt_cv_sys_max_cmd_len"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else @@ -5377,30 +5420,6 @@ : ${MV="mv -f"} : ${RM="rm -f"} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 -$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 -$as_echo "$xsi_shell" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 -$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } -lt_shell_append=no -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 -$as_echo "$lt_shell_append" >&6; } - - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else @@ -5523,13 +5542,13 @@ reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then + if test yes != "$GCC"; then reload_cmds=false fi ;; darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + if test yes = "$GCC"; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi @@ -5654,13 +5673,13 @@ # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. +# 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) @@ -5687,8 +5706,7 @@ # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else @@ -5784,8 +5802,8 @@ lt_cv_deplibs_check_method=pass_all ;; -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' @@ -5838,6 +5856,9 @@ tpf*) lt_cv_deplibs_check_method=pass_all ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; esac fi @@ -5992,8 +6013,8 @@ case $host_os in cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in *--identify-strict*) lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib @@ -6005,7 +6026,7 @@ ;; *) # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" + lt_cv_sharedlib_from_linklib_cmd=$ECHO ;; esac @@ -6160,7 +6181,7 @@ ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } - if test "$ac_status" -eq 0; then + if test 0 -eq "$ac_status"; then # Ensure the archiver fails upon bogus file names. rm -f conftest.$ac_objext libconftest.a { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 @@ -6168,7 +6189,7 @@ ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } - if test "$ac_status" -ne 0; then + if test 0 -ne "$ac_status"; then lt_cv_ar_at_file=@ fi fi @@ -6181,7 +6202,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 $as_echo "$lt_cv_ar_at_file" >&6; } -if test "x$lt_cv_ar_at_file" = xno; then +if test no = "$lt_cv_ar_at_file"; then archiver_list_spec= else archiver_list_spec=$lt_cv_ar_at_file @@ -6398,7 +6419,7 @@ if test -n "$RANLIB"; then case $host_os in - openbsd*) + bitrig* | openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) @@ -6488,7 +6509,7 @@ symcode='[ABCDGISTW]' ;; hpux*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then symcode='[ABCDEGRST]' fi ;; @@ -6521,14 +6542,44 @@ symcode='[ABCDGIRSTW]' ;; esac +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" # Handle CRLF in mingw tool chain opt_cr= @@ -6546,21 +6597,24 @@ # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" @@ -6608,11 +6662,11 @@ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST -#elif defined(__osf__) +#elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else @@ -6638,7 +6692,7 @@ { { "@PROGRAM@", (void *) 0 }, _LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; @@ -6658,13 +6712,13 @@ mv conftest.$ac_objext conftstm.$ac_objext lt_globsym_save_LIBS=$LIBS lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" + LIBS=conftstm.$ac_objext CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then + test $ac_status = 0; } && test -s conftest$ac_exeext; then pipe_works=yes fi LIBS=$lt_globsym_save_LIBS @@ -6685,7 +6739,7 @@ rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then + if test yes = "$pipe_works"; then break else lt_cv_sys_global_symbol_pipe= @@ -6738,6 +6792,16 @@ + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 $as_echo_n "checking for sysroot... " >&6; } @@ -6750,9 +6814,9 @@ lt_sysroot= -case ${with_sysroot} in #( +case $with_sysroot in #( yes) - if test "$GCC" = yes; then + if test yes = "$GCC"; then lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( @@ -6762,8 +6826,8 @@ no|'') ;; #( *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 -$as_echo "${with_sysroot}" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 +$as_echo "$with_sysroot" >&6; } as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 ;; esac @@ -6775,18 +6839,99 @@ +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 +$as_echo_n "checking for a working dd... " >&6; } +if ${ac_cv_path_lt_DD+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +if test -z "$lt_DD"; then + ac_path_lt_DD_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in dd; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_lt_DD" || continue +if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi + $ac_path_lt_DD_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_lt_DD"; then + : + fi +else + ac_cv_path_lt_DD=$lt_DD +fi + +rm -f conftest.i conftest2.i conftest.out +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 +$as_echo "$ac_cv_path_lt_DD" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 +$as_echo_n "checking how to truncate binary pipes... " >&6; } +if ${lt_cv_truncate_bin+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 +$as_echo "$lt_cv_truncate_bin" >&6; } + + + + + + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +test no = "$enable_libtool_lock" || enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -6795,24 +6940,25 @@ test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) - HPUX_IA64_MODE="32" + HPUX_IA64_MODE=32 ;; *ELF-64*) - HPUX_IA64_MODE="64" + HPUX_IA64_MODE=64 ;; esac fi rm -rf conftest* ;; *-*-irix6*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo '#line '$LINENO' "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" @@ -6841,9 +6987,50 @@ rm -rf conftest* ;; +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -6866,10 +7053,10 @@ ;; esac ;; - powerpc64le-*) + powerpc64le-*linux*) LD="${LD-ld} -m elf32lppclinux" ;; - powerpc64-*) + powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) @@ -6888,10 +7075,10 @@ x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; - powerpcle-*) + powerpcle-*linux*) LD="${LD-ld} -m elf64lppc" ;; - powerpc-*) + powerpc-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) @@ -6909,7 +7096,7 @@ *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" + SAVE_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } @@ -6949,13 +7136,14 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then + if test yes != "$lt_cv_cc_needs_belf"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" + CFLAGS=$SAVE_CFLAGS fi ;; *-*solaris*) - # Find out which ABI we are using. + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 @@ -6967,7 +7155,7 @@ case $lt_cv_prog_gnu_ld in yes*) case $host in - i?86-*-solaris*) + i?86-*-solaris*|x86_64-*-solaris*) LD="${LD-ld} -m elf_x86_64" ;; sparc*-*-solaris*) @@ -6976,7 +7164,7 @@ esac # GNU ld 2.21 introduced _sol2 emulations. Use them if available. if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD="${LD-ld}_sol2" + LD=${LD-ld}_sol2 fi ;; *) @@ -6992,7 +7180,7 @@ ;; esac -need_locks="$enable_libtool_lock" +need_locks=$enable_libtool_lock if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. @@ -7103,7 +7291,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 $as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test "x$lt_cv_path_mainfest_tool" != xyes; then +if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi @@ -7606,7 +7794,7 @@ $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then + if test -z "$LT_MULTI_MODULE"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the @@ -7624,7 +7812,7 @@ cat conftest.err >&5 # Otherwise, if the output was created with a 0 exit code from # the compiler, it worked. - elif test -f libconftest.dylib && test $_lt_result -eq 0; then + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 @@ -7663,7 +7851,7 @@ fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 @@ -7692,7 +7880,7 @@ _lt_result=$? if test -s conftest.err && $GREP force_load conftest.err; then cat conftest.err >&5 - elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then lt_cv_ld_force_load=yes else cat conftest.err >&5 @@ -7705,32 +7893,32 @@ $as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[012][,.]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then + if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= @@ -7738,6 +7926,41 @@ ;; esac +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -8039,14 +8262,14 @@ *) enable_shared=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_shared=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8070,14 +8293,14 @@ *) enable_static=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_static=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8101,14 +8324,14 @@ *) pic_mode=default # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for lt_pkg in $withval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$lt_pkg" = "X$lt_p"; then pic_mode=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8116,8 +8339,6 @@ fi -test -z "$pic_mode" && pic_mode=default - @@ -8133,14 +8354,14 @@ *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, for pkg in $enableval; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done - IFS="$lt_save_ifs" + IFS=$lt_save_ifs ;; esac else @@ -8154,11 +8375,63 @@ + shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[5-9]*,yes) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 +$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } + +# Check whether --with-aix-soname was given. +if test "${with_aix_soname+set}" = set; then : + withval=$with_aix_soname; case $withval in + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname +else + if ${lt_cv_with_aix_soname+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_with_aix_soname=aix +fi + + with_aix_soname=$lt_cv_with_aix_soname +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 +$as_echo "$with_aix_soname" >&6; } + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + + + + + + + # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" +LIBTOOL_DEPS=$ltmain # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' @@ -8207,7 +8480,7 @@ -if test -n "${ZSH_VERSION+set}" ; then +if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi @@ -8246,7 +8519,7 @@ # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then + if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -8257,14 +8530,14 @@ ofile=libtool can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except MSVC, +# All known linkers require a '.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a -with_gnu_ld="$lt_cv_prog_gnu_ld" +with_gnu_ld=$lt_cv_prog_gnu_ld -old_CC="$CC" -old_CFLAGS="$CFLAGS" +old_CC=$CC +old_CFLAGS=$CFLAGS # Set sane defaults for various variables test -z "$CC" && CC=cc @@ -8273,15 +8546,8 @@ test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +func_cc_basename $compiler +cc_basename=$func_cc_basename_result # Only perform the check for file, if the check method requires it @@ -8296,22 +8562,22 @@ else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -f "$ac_dir/${ac_tool_prefix}file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : @@ -8334,13 +8600,13 @@ break fi done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } @@ -8362,22 +8628,22 @@ else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; *) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" + IFS=$lt_save_ifs test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -f "$ac_dir/file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + MAGIC_CMD=$lt_cv_path_MAGIC_CMD if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : @@ -8400,13 +8666,13 @@ break fi done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD ;; esac fi -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +MAGIC_CMD=$lt_cv_path_MAGIC_CMD if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } @@ -8427,7 +8693,7 @@ # Use C for the default configuration in the libtool script -lt_save_CC="$CC" +lt_save_CC=$CC ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -8481,11 +8747,15 @@ $RM -r conftest* +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $cc_basename in nvcc*) lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; @@ -8501,7 +8771,7 @@ lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" + lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -8531,7 +8801,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then +if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : @@ -8549,17 +8819,18 @@ lt_prog_compiler_static= - if test "$GCC" = yes; then + if test yes = "$GCC"; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi + lt_prog_compiler_pic='-fPIC' ;; amigaos*) @@ -8570,8 +8841,8 @@ ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac @@ -8587,6 +8858,11 @@ # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac ;; darwin* | rhapsody*) @@ -8657,7 +8933,7 @@ case $host_os in aix*) lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else @@ -8665,10 +8941,29 @@ fi ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac ;; hpux9* | hpux10* | hpux11*) @@ -8684,7 +8979,7 @@ ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' + lt_prog_compiler_static='$wl-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) @@ -8695,7 +8990,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. + # old Intel for x86_64, which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' @@ -8720,6 +9015,12 @@ lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) @@ -8817,7 +9118,7 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi @@ -8846,7 +9147,7 @@ fi case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: + # For platforms that do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; @@ -8878,7 +9179,7 @@ lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins @@ -8908,7 +9209,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then +if test yes = "$lt_cv_prog_compiler_pic_works"; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; @@ -8940,7 +9241,7 @@ $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -8959,13 +9260,13 @@ fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } -if test x"$lt_cv_prog_compiler_static_works" = xyes; then +if test yes = "$lt_cv_prog_compiler_static_works"; then : else lt_prog_compiler_static= @@ -9085,8 +9386,8 @@ -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } @@ -9098,9 +9399,9 @@ ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + if test no = "$hard_links"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} need_locks=warn fi else @@ -9143,9 +9444,9 @@ # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if @@ -9160,7 +9461,7 @@ # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. - if test "$GCC" != yes; then + if test yes != "$GCC"; then with_gnu_ld=no fi ;; @@ -9168,7 +9469,7 @@ # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; - openbsd*) + openbsd* | bitrig*) with_gnu_ld=no ;; linux* | k*bsd*-gnu | gnu*) @@ -9181,7 +9482,7 @@ # On some targets, GNU ld is compatible enough with the native linker # that we're better off using the native interface for both. lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then case $host_os in aix*) # The AIX port of GNU ld has always aspired to compatibility @@ -9203,24 +9504,24 @@ esac fi - if test "$lt_use_gnu_ld_interface" = yes; then + if test yes = "$lt_use_gnu_ld_interface"; then # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' + wlarc='$wl' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + export_dynamic_flag_spec='$wl--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no - case `$LD -v 2>&1` in + case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... @@ -9233,7 +9534,7 @@ case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then + if test ia64 != "$host_cpu"; then ld_shlibs=no cat <<_LT_EOF 1>&2 @@ -9252,7 +9553,7 @@ case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) @@ -9268,7 +9569,7 @@ allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' else ld_shlibs=no fi @@ -9278,7 +9579,7 @@ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='${wl}--export-all-symbols' + export_dynamic_flag_spec='$wl--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes @@ -9286,61 +9587,89 @@ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' link_all_deplibs=yes ;; - interix[3-9]*) + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + + interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no - if test "$host_os" = linux-dietlibc; then + if test linux-dietlibc = "$host_os"; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no + && test no = "$tmp_diet" then tmp_addflag=' $pic_flag' tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -9351,42 +9680,47 @@ lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in + tcc*) + export_dynamic_flag_spec='-rdynamic' + ;; xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then + if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -9400,8 +9734,8 @@ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -9419,8 +9753,8 @@ _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -9432,7 +9766,7 @@ ld_shlibs=no cat <<_LT_EOF 1>&2 -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify @@ -9447,9 +9781,9 @@ # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -9466,15 +9800,15 @@ *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac - if test "$ld_shlibs" = no; then + if test no = "$ld_shlibs"; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= @@ -9490,7 +9824,7 @@ # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported @@ -9498,34 +9832,57 @@ ;; aix[4-9]*) - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' - no_entry_flag="" + no_entry_flag= else # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then aix_use_runtimelinking=yes break fi done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi ;; esac @@ -9544,13 +9901,21 @@ hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes - file_list_spec='${wl}-f,' + file_list_spec='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct=no + hardcode_direct_absolute=no + ;; + esac - if test "$GCC" = yes; then + if test yes = "$GCC"; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` + collect2name=`$CC -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then @@ -9569,36 +9934,42 @@ ;; esac shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' fi - link_all_deplibs=no + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' else # not using gcc - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' else - shared_flag='${wl}-bM:SRE' + shared_flag='$wl-bM:SRE' fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' fi fi - export_dynamic_flag_spec='${wl}-bexpall' + export_dynamic_flag_spec='$wl-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : @@ -9633,7 +10004,7 @@ rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" + lt_cv_aix_libpath_=/usr/lib:/lib fi fi @@ -9641,17 +10012,17 @@ aix_libpath=$lt_cv_aix_libpath_ fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then + if test set = "${lt_cv_aix_libpath+set}"; then aix_libpath=$lt_cv_aix_libpath else if ${lt_cv_aix_libpath_+:} false; then : @@ -9686,7 +10057,7 @@ rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" + lt_cv_aix_libpath_=/usr/lib:/lib fi fi @@ -9694,21 +10065,33 @@ aix_libpath=$lt_cv_aix_libpath_ fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then + no_undefined_flag=' $wl-bernotok' + allow_undefined_flag=' $wl-berok' + if test yes = "$with_gnu_ld"; then # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' else # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' fi archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' fi fi ;; @@ -9717,7 +10100,7 @@ case $host_cpu in powerpc) # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) @@ -9747,16 +10130,17 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes @@ -9765,18 +10149,18 @@ # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' ;; *) # Assume MSVC wrapper @@ -9785,7 +10169,7 @@ # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" + shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. @@ -9804,24 +10188,24 @@ hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' else whole_archive_flag_spec='' fi link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" + allow_undefined_flag=$_lt_dar_allow_undefined case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; + ifort*|nagfor*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac - if test "$_lt_dar_can_shared" = "yes"; then + if test yes = "$_lt_dar_can_shared"; then output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" else ld_shlibs=no @@ -9863,33 +10247,33 @@ ;; hpux9*) - if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + if test yes = "$GCC"; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test yes,no = "$GCC,$with_gnu_ld"; then + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes @@ -9897,25 +10281,25 @@ ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test yes,no = "$GCC,$with_gnu_ld"; then case $host_cpu in hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) @@ -9927,7 +10311,7 @@ $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler__b=no - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then @@ -9946,14 +10330,14 @@ fi fi $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 $as_echo "$lt_cv_prog_compiler__b" >&6; } -if test x"$lt_cv_prog_compiler__b" = xyes; then - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +if test yes = "$lt_cv_prog_compiler__b"; then + archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi @@ -9961,8 +10345,8 @@ ;; esac fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' hardcode_libdir_separator=: case $host_cpu in @@ -9973,7 +10357,7 @@ *) hardcode_direct=yes hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' + export_dynamic_flag_spec='$wl-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. @@ -9984,8 +10368,8 @@ ;; irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. @@ -9995,8 +10379,8 @@ if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo (void) { return 0; } @@ -10008,24 +10392,35 @@ fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + LDFLAGS=$save_LDFLAGS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 $as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + if test yes = "$lt_cv_irix_exported_symbol"; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi + link_all_deplibs=no else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + ld_shlibs=yes + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out @@ -10040,7 +10435,7 @@ newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; @@ -10048,27 +10443,19 @@ *nto* | *qnx*) ;; - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' fi else ld_shlibs=no @@ -10079,33 +10466,53 @@ hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes ;; osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' fi archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' @@ -10116,24 +10523,24 @@ solaris*) no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + wlarc='$wl' + archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) - wlarc='${wl}' - archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + wlarc='$wl' + archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi @@ -10143,11 +10550,11 @@ solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', + # but understands '-z linker_flag'. GCC discards it without '$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + if test yes = "$GCC"; then + whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi @@ -10157,10 +10564,10 @@ ;; sunos4*) - if test "x$host_vendor" = xsequent; then + if test sequent = "$host_vendor"; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi @@ -10209,43 +10616,43 @@ ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' + no_undefined_flag='$wl-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not + # Note: We CANNOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' + no_undefined_flag='$wl-z,text' + allow_undefined_flag='$wl-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_flag_spec='$wl-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' + export_dynamic_flag_spec='$wl-Bexport' runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; @@ -10260,10 +10667,10 @@ ;; esac - if test x$host_vendor = xsni; then + if test sni = "$host_vendor"; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='${wl}-Blargedynsym' + export_dynamic_flag_spec='$wl-Blargedynsym' ;; esac fi @@ -10271,7 +10678,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no +test no = "$ld_shlibs" && can_build_shared=no with_gnu_ld=$with_gnu_ld @@ -10297,7 +10704,7 @@ # Assume -lc should be added archive_cmds_need_lc=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then + if test yes,yes = "$GCC,$enable_shared"; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. @@ -10512,14 +10919,14 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } -if test "$GCC" = yes; then +if test yes = "$GCC"; then case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; + mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` case $lt_search_path_spec in @@ -10535,28 +10942,35 @@ ;; esac # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. + # and add multilib dir if necessary... lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; + lt_foo = "/" $lt_i lt_foo; } else { lt_count--; } @@ -10570,7 +10984,7 @@ # for these hosts. case $host_os in mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([A-Za-z]:\),\1,g'` ;; + $SED 's|/\([A-Za-z]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else @@ -10579,7 +10993,7 @@ library_names_spec= libname_spec='lib$name' soname_spec= -shrext_cmds=".so" +shrext_cmds=.so postinstall_cmds= postuninstall_cmds= finish_cmds= @@ -10596,14 +11010,16 @@ # flags to be left without arguments need_version=unknown + + case $host_os in aix3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' + soname_spec='$libname$release$shared_ext$major' ;; aix[4-9]*) @@ -10611,41 +11027,91 @@ need_lib_prefix=no need_version=no hardcode_into_libs=yes - if test "$host_cpu" = ia64; then + if test ia64 = "$host_cpu"; then # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac shlibpath_var=LIBPATH fi ;; @@ -10655,18 +11121,18 @@ powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) - library_names_spec='${libname}${shared_ext}' + library_names_spec='$libname$shared_ext' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; @@ -10674,8 +11140,8 @@ bsdi[45]*) version_type=linux # correct to gnu/linux during the next big refactor need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" @@ -10687,7 +11153,7 @@ cygwin* | mingw* | pw32* | cegcc*) version_type=windows - shrext_cmds=".dll" + shrext_cmds=.dll need_version=no need_lib_prefix=no @@ -10696,8 +11162,8 @@ # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ @@ -10713,17 +11179,17 @@ case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' @@ -10732,8 +11198,8 @@ *,cl*) # Native MSVC libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' case $build_os in mingw*) @@ -10760,7 +11226,7 @@ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=$LIB if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` @@ -10773,8 +11239,8 @@ esac # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname' @@ -10787,7 +11253,7 @@ *) # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; esac @@ -10800,8 +11266,8 @@ version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' @@ -10814,8 +11280,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -10833,12 +11299,13 @@ version_type=freebsd-$objformat case $version_type in freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' need_version=no need_lib_prefix=no ;; freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' need_version=yes ;; esac @@ -10868,10 +11335,10 @@ need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; @@ -10889,14 +11356,15 @@ dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' @@ -10904,8 +11372,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; @@ -10914,8 +11382,8 @@ dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555, ... @@ -10928,8 +11396,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -10940,7 +11408,7 @@ case $host_os in nonstopux*) version_type=nonstopux ;; *) - if test "$lt_cv_prog_gnu_ld" = yes; then + if test yes = "$lt_cv_prog_gnu_ld"; then version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix @@ -10948,8 +11416,8 @@ esac need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= @@ -10968,8 +11436,8 @@ esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" hardcode_into_libs=yes ;; @@ -10978,13 +11446,33 @@ dynamic_linker=no ;; +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec='-L$libdir' + ;; + # This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no @@ -11028,7 +11516,12 @@ # before this can be enabled. hardcode_into_libs=yes - # Append ld.so.conf contents to the search path + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" @@ -11060,12 +11553,12 @@ need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH @@ -11075,7 +11568,7 @@ newsos6) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; @@ -11084,58 +11577,68 @@ version_type=qnx need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; -openbsd*) +openbsd* | bitrig*) version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" + sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no else - shlibpath_overrides_runpath=yes + need_version=yes fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' - shrext_cmds=".dll" + version_type=windows + shrext_cmds=.dll + need_version=no need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; rdos*) @@ -11146,8 +11649,8 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes @@ -11157,11 +11660,11 @@ sunos4*) version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then need_lib_prefix=no fi need_version=yes @@ -11169,8 +11672,8 @@ sysv4 | sysv4.3*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) @@ -11191,24 +11694,24 @@ ;; sysv4*MP*) - if test -d /usr/nec ;then + if test -d /usr/nec; then version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf + version_type=sco need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then + if test yes = "$with_gnu_ld"; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' @@ -11226,7 +11729,7 @@ version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes @@ -11234,8 +11737,8 @@ uts4*) version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' shlibpath_var=LD_LIBRARY_PATH ;; @@ -11245,20 +11748,35 @@ esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no +test no = "$dynamic_linker" && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then +if test yes = "$GCC"; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec fi +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + + + + @@ -11355,15 +11873,15 @@ hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || - test "X$hardcode_automatic" = "Xyes" ; then + test yes = "$hardcode_automatic"; then # We can hardcode non-existent directories. - if test "$hardcode_direct" != no && + if test no != "$hardcode_direct" && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && + test no != "$hardcode_minus_L"; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else @@ -11378,12 +11896,12 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } -if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then +if test relink = "$hardcode_action" || + test yes = "$inherit_rpath"; then # Fast installation is not supported enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then # Fast installation is not necessary enable_fast_install=needless fi @@ -11393,7 +11911,7 @@ - if test "x$enable_dlopen" != xyes; then + if test yes != "$enable_dlopen"; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown @@ -11403,23 +11921,23 @@ case $host_os in beos*) - lt_cv_dlopen="load_add_on" + lt_cv_dlopen=load_add_on lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; cygwin*) - lt_cv_dlopen="dlopen" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs= ;; darwin*) - # if libdl is installed we need to link against it + # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if ${ac_cv_lib_dl_dlopen+:} false; then : @@ -11457,10 +11975,10 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else - lt_cv_dlopen="dyld" + lt_cv_dlopen=dyld lt_cv_dlopen_libs= lt_cv_dlopen_self=yes @@ -11468,10 +11986,18 @@ ;; + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" + lt_cv_dlopen=shl_load else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } @@ -11510,11 +12036,11 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" + lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" + lt_cv_dlopen=dlopen else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } @@ -11553,7 +12079,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } @@ -11592,7 +12118,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } @@ -11631,7 +12157,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" + lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld fi @@ -11652,21 +12178,21 @@ ;; esac - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else + if test no = "$lt_cv_dlopen"; then enable_dlopen=no + else + enable_dlopen=yes fi case $lt_cv_dlopen in dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - save_LDFLAGS="$LDFLAGS" + save_LDFLAGS=$LDFLAGS wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - save_LIBS="$LIBS" + save_LIBS=$LIBS LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 @@ -11674,7 +12200,7 @@ if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then : + if test yes = "$cross_compiling"; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -11721,9 +12247,9 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated +/* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif @@ -11753,7 +12279,7 @@ (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -11773,14 +12299,14 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } - if test "x$lt_cv_dlopen_self" = xyes; then + if test yes = "$lt_cv_dlopen_self"; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then : + if test yes = "$cross_compiling"; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -11827,9 +12353,9 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated +/* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) int fnord () __attribute__((visibility("default"))); #endif @@ -11859,7 +12385,7 @@ (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -11880,9 +12406,9 @@ $as_echo "$lt_cv_dlopen_self_static" >&6; } fi - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS ;; esac @@ -11926,7 +12452,7 @@ # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) - if test -n "$STRIP" ; then + if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 @@ -11954,7 +12480,7 @@ - # Report which library types will actually be built + # Report what library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 @@ -11962,13 +12488,13 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no + test no = "$can_build_shared" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) - test "$enable_shared" = yes && enable_static=no + test yes = "$enable_shared" && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' @@ -11976,8 +12502,12 @@ ;; aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac fi ;; esac @@ -11987,7 +12517,7 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes + test yes = "$enable_shared" || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } @@ -12001,7 +12531,7 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC="$lt_save_CC" +CC=$lt_save_CC @@ -12591,159 +13121,97 @@ done - -# Check whether --with-ogg was given. -if test "${with_ogg+set}" = set; then : - withval=$with_ogg; ogg_prefix="$withval" -else - ogg_prefix="" -fi - - -# Check whether --with-ogg-libraries was given. -if test "${with_ogg_libraries+set}" = set; then : - withval=$with_ogg_libraries; ogg_libraries="$withval" -else - ogg_libraries="" -fi - - -# Check whether --with-ogg-includes was given. -if test "${with_ogg_includes+set}" = set; then : - withval=$with_ogg_includes; ogg_includes="$withval" -else - ogg_includes="" -fi - -# Check whether --enable-oggtest was given. -if test "${enable_oggtest+set}" = set; then : - enableval=$enable_oggtest; -else - enable_oggtest=yes -fi - - - if test "x$ogg_libraries" != "x" ; then - OGG_LIBS="-L$ogg_libraries" - elif test "x$ogg_prefix" != "x" ; then - OGG_LIBS="-L$ogg_prefix/lib" - elif test "x$prefix" != "xNONE" ; then - OGG_LIBS="-L$prefix/lib" - fi - - OGG_LIBS="$OGG_LIBS -logg" - - if test "x$ogg_includes" != "x" ; then - OGG_CFLAGS="-I$ogg_includes" - elif test "x$ogg_prefix" != "x" ; then - OGG_CFLAGS="-I$ogg_prefix/include" - elif test "x$prefix" != "xNONE"; then - OGG_CFLAGS="-I$prefix/include" - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Ogg" >&5 -$as_echo_n "checking for Ogg... " >&6; } - no_ogg="" - - - if test "x$enable_oggtest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $OGG_CFLAGS" - LIBS="$LIBS $OGG_LIBS" - rm -f conf.oggtest - if test "$cross_compiling" = yes; then : - echo $ac_n "cross compiling; assumed OK... $ac_c" +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _mwvalidcheckl in -lmw" >&5 +$as_echo_n "checking for _mwvalidcheckl in -lmw... " >&6; } +if ${ac_cv_lib_mw__mwvalidcheckl+:} false; then : + $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + ac_check_lib_save_LIBS=$LIBS +LIBS="-lmw $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include -#include -#include -#include - -int main () +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char _mwvalidcheckl (); +int +main () { - system("touch conf.oggtest"); +return _mwvalidcheckl (); + ; return 0; } - - _ACEOF -if ac_fn_c_try_run "$LINENO"; then : - +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_mw__mwvalidcheckl=yes else - no_ogg=yes + ac_cv_lib_mw__mwvalidcheckl=no fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mw__mwvalidcheckl" >&5 +$as_echo "$ac_cv_lib_mw__mwvalidcheckl" >&6; } +if test "x$ac_cv_lib_mw__mwvalidcheckl" = xyes; then : + LIBM=-lmw fi - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - - if test "x$no_ogg" = "x" ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - src="src" - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - if test -f conf.oggtest ; then - : - else - echo "*** Could not run Ogg test program, checking why..." - CFLAGS="$CFLAGS $OGG_CFLAGS" - LIBS="$LIBS $OGG_LIBS" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5 +$as_echo_n "checking for cos in -lm... " >&6; } +if ${ac_cv_lib_m_cos+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include -#include - +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char cos (); int main () { - return 0; +return cos (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : - echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding Ogg or finding the wrong" - echo "*** version of Ogg. If it is not finding Ogg, you'll need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" - echo "*** to the installed location Also, make sure you have run ldconfig if that" - echo "*** is required on your system" - echo "***" - echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" -else - echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means Ogg was incorrectly installed" - echo "*** or that you have moved Ogg since it was installed." + ac_cv_lib_m_cos=yes +else + ac_cv_lib_m_cos=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - OGG_CFLAGS="" - OGG_LIBS="" - src="" - fi - - - rm -f conf.oggtest - - +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5 +$as_echo "$ac_cv_lib_m_cos" >&6; } +if test "x$ac_cv_lib_m_cos" = xyes; then : + LIBM="$LIBM -lm" +fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sin in -lm" >&5 -$as_echo_n "checking for sin in -lm... " >&6; } -if ${ac_cv_lib_m_sin+:} false; then : + ;; +*) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5 +$as_echo_n "checking for cos in -lm... " >&6; } +if ${ac_cv_lib_m_cos+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -12757,34 +13225,33 @@ #ifdef __cplusplus extern "C" #endif -char sin (); +char cos (); int main () { -return sin (); +return cos (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_m_sin=yes + ac_cv_lib_m_cos=yes else - ac_cv_lib_m_sin=no + ac_cv_lib_m_cos=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_sin" >&5 -$as_echo "$ac_cv_lib_m_sin" >&6; } -if test "x$ac_cv_lib_m_sin" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBM 1 -_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5 +$as_echo "$ac_cv_lib_m_cos" >&6; } +if test "x$ac_cv_lib_m_cos" = xyes; then : + LIBM=-lm +fi - LIBS="-lm $LIBS" + ;; +esac -fi # Check for getopt_long; if not found, use included source. @@ -12857,49 +13324,13 @@ done -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lwinmm" >&5 -$as_echo_n "checking for main in -lwinmm... " >&6; } -if ${ac_cv_lib_winmm_main+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lwinmm $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - -int -main () -{ -return main (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_winmm_main=yes -else - ac_cv_lib_winmm_main=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_winmm_main" >&5 -$as_echo "$ac_cv_lib_winmm_main" >&6; } -if test "x$ac_cv_lib_winmm_main" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBWINMM 1 -_ACEOF - - LIBS="-lwinmm $LIBS" +SPEEX_VERSION=$PACKAGE_VERSION -fi cat >>confdefs.h <<_ACEOF -#define SPEEX_VERSION "${SPEEX_VERSION}" +#define SPEEX_VERSION "${PACKAGE_VERSION}" _ACEOF @@ -12985,77 +13416,12 @@ fi -# Check whether --enable-vbr was given. -if test "${enable_vbr+set}" = set; then : - enableval=$enable_vbr; if test "$enableval" = no; then - -$as_echo "#define DISABLE_VBR /**/" >>confdefs.h - -fi -fi - - -# Check whether --enable-arm4-asm was given. -if test "${enable_arm4_asm+set}" = set; then : - enableval=$enable_arm4_asm; if test "$enableval" = yes; then - -$as_echo "#define ARM4_ASM /**/" >>confdefs.h - -fi +# Check whether --enable-binaries was given. +if test "${enable_binaries+set}" = set; then : + enableval=$enable_binaries; fi - -# Check whether --enable-arm5e-asm was given. -if test "${enable_arm5e_asm+set}" = set; then : - enableval=$enable_arm5e_asm; if test "$enableval" = yes; then - -$as_echo "#define ARM5E_ASM /**/" >>confdefs.h - -fi -fi - - -# Check whether --enable-blackfin-asm was given. -if test "${enable_blackfin_asm+set}" = set; then : - enableval=$enable_blackfin_asm; if test "$enableval" = yes; then - -$as_echo "#define BFIN_ASM /**/" >>confdefs.h - - LDFLAGS="-Wl,-elf2flt=-s100000" -fi -fi - - -# Check whether --enable-fixed-point-debug was given. -if test "${enable_fixed_point_debug+set}" = set; then : - enableval=$enable_fixed_point_debug; if test "$enableval" = yes; then - -$as_echo "#define FIXED_DEBUG /**/" >>confdefs.h - -fi -fi - - -# Check whether --enable-ti-c55x was given. -if test "${enable_ti_c55x+set}" = set; then : - enableval=$enable_ti_c55x; if test "$enableval" = yes; then - has_char16=yes; - -$as_echo "#define TI_C55X /**/" >>confdefs.h - -fi -fi - - - -# Check whether --with-fft was given. -if test "${with_fft+set}" = set; then : - withval=$with_fft; FFT=$withval - -fi - - -FFT_PKGCONFIG= +if test "$enableval" != no; then @@ -13176,6 +13542,196 @@ PKG_CONFIG="" fi fi + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for OGG" >&5 +$as_echo_n "checking for OGG... " >&6; } + +if test -n "$OGG_CFLAGS"; then + pkg_cv_OGG_CFLAGS="$OGG_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ogg\""; } >&5 + ($PKG_CONFIG --exists --print-errors "ogg") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_OGG_CFLAGS=`$PKG_CONFIG --cflags "ogg" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$OGG_LIBS"; then + pkg_cv_OGG_LIBS="$OGG_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ogg\""; } >&5 + ($PKG_CONFIG --exists --print-errors "ogg") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_OGG_LIBS=`$PKG_CONFIG --libs "ogg" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + OGG_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "ogg" 2>&1` + else + OGG_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "ogg" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$OGG_PKG_ERRORS" >&5 + + if false; then + BUILD_BINARIES_TRUE= + BUILD_BINARIES_FALSE='#' +else + BUILD_BINARIES_TRUE='#' + BUILD_BINARIES_FALSE= +fi + +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + if false; then + BUILD_BINARIES_TRUE= + BUILD_BINARIES_FALSE='#' +else + BUILD_BINARIES_TRUE='#' + BUILD_BINARIES_FALSE= +fi + +else + OGG_CFLAGS=$pkg_cv_OGG_CFLAGS + OGG_LIBS=$pkg_cv_OGG_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + if true; then + BUILD_BINARIES_TRUE= + BUILD_BINARIES_FALSE='#' +else + BUILD_BINARIES_TRUE='#' + BUILD_BINARIES_FALSE= +fi + +fi +else + if false; then + BUILD_BINARIES_TRUE= + BUILD_BINARIES_FALSE='#' +else + BUILD_BINARIES_TRUE='#' + BUILD_BINARIES_FALSE= +fi + +fi + +# Check whether --enable-vbr was given. +if test "${enable_vbr+set}" = set; then : + enableval=$enable_vbr; if test "$enableval" = no; then + +$as_echo "#define DISABLE_VBR /**/" >>confdefs.h + +fi +fi + + +# Check whether --enable-arm4-asm was given. +if test "${enable_arm4_asm+set}" = set; then : + enableval=$enable_arm4_asm; if test "$enableval" = yes; then + +$as_echo "#define ARM4_ASM /**/" >>confdefs.h + +fi +fi + + +# Check whether --enable-arm5e-asm was given. +if test "${enable_arm5e_asm+set}" = set; then : + enableval=$enable_arm5e_asm; if test "$enableval" = yes; then + +$as_echo "#define ARM5E_ASM /**/" >>confdefs.h + +fi +fi + + +# Check whether --enable-blackfin-asm was given. +if test "${enable_blackfin_asm+set}" = set; then : + enableval=$enable_blackfin_asm; if test "$enableval" = yes; then + +$as_echo "#define BFIN_ASM /**/" >>confdefs.h + +fi +fi + +WINMM_LIBS="" +case $host_os in + uclinux) LDFLAGS="-Wl,-elf2flt=-s100000 $LDFLAGS";; + *mingw*) WINMM_LIBS="-lwinmm";; +esac + + +# Check whether --enable-fixed-point-debug was given. +if test "${enable_fixed_point_debug+set}" = set; then : + enableval=$enable_fixed_point_debug; if test "$enableval" = yes; then + +$as_echo "#define FIXED_DEBUG /**/" >>confdefs.h + +fi +fi + + +# Check whether --enable-ti-c55x was given. +if test "${enable_ti_c55x+set}" = set; then : + enableval=$enable_ti_c55x; if test "$enableval" = yes; then + has_char16=yes; + +$as_echo "#define TI_C55X /**/" >>confdefs.h + +fi +fi + + +# Check whether --enable-vorbis-psy was given. +if test "${enable_vorbis_psy+set}" = set; then : + enableval=$enable_vorbis_psy; if test "$enableval" = yes; then + vorbis_psy=yes; + +$as_echo "#define VORBIS_PSYCHO /**/" >>confdefs.h + +fi +fi + + + +# Check whether --with-fft was given. +if test "${with_fft+set}" = set; then : + withval=$with_fft; FFT=$withval + +fi + + +FFT_PKGCONFIG= case $FFT in #( kiss) : @@ -13237,7 +13793,7 @@ if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then @@ -13264,7 +13820,7 @@ and FFT_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} @@ -13348,6 +13904,287 @@ + if test "x$vorbis_psy" = "xyes"; then + BUILD_VORBIS_PSY_TRUE= + BUILD_VORBIS_PSY_FALSE='#' +else + BUILD_VORBIS_PSY_TRUE='#' + BUILD_VORBIS_PSY_FALSE= +fi + + + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for SPEEXDSP" >&5 +$as_echo_n "checking for SPEEXDSP... " >&6; } + +if test -n "$SPEEXDSP_CFLAGS"; then + pkg_cv_SPEEXDSP_CFLAGS="$SPEEXDSP_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"speexdsp\""; } >&5 + ($PKG_CONFIG --exists --print-errors "speexdsp") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_SPEEXDSP_CFLAGS=`$PKG_CONFIG --cflags "speexdsp" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$SPEEXDSP_LIBS"; then + pkg_cv_SPEEXDSP_LIBS="$SPEEXDSP_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"speexdsp\""; } >&5 + ($PKG_CONFIG --exists --print-errors "speexdsp") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_SPEEXDSP_LIBS=`$PKG_CONFIG --libs "speexdsp" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + SPEEXDSP_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "speexdsp" 2>&1` + else + SPEEXDSP_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "speexdsp" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$SPEEXDSP_PKG_ERRORS" >&5 + + speexdsp_failed=yes +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + speexdsp_failed=yes +else + SPEEXDSP_CFLAGS=$pkg_cv_SPEEXDSP_CFLAGS + SPEEXDSP_LIBS=$pkg_cv_SPEEXDSP_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +$as_echo "#define USE_SPEEXDSP /**/" >>confdefs.h + +fi + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int16_t" >&5 +$as_echo_n "checking size of int16_t... " >&6; } +if ${ac_cv_sizeof_int16_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (int16_t))" "ac_cv_sizeof_int16_t" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_int16_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (int16_t) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_int16_t=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int16_t" >&5 +$as_echo "$ac_cv_sizeof_int16_t" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_INT16_T $ac_cv_sizeof_int16_t +_ACEOF + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of uint16_t" >&5 +$as_echo_n "checking size of uint16_t... " >&6; } +if ${ac_cv_sizeof_uint16_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (uint16_t))" "ac_cv_sizeof_uint16_t" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_uint16_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (uint16_t) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_uint16_t=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_uint16_t" >&5 +$as_echo "$ac_cv_sizeof_uint16_t" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_UINT16_T $ac_cv_sizeof_uint16_t +_ACEOF + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of u_int16_t" >&5 +$as_echo_n "checking size of u_int16_t... " >&6; } +if ${ac_cv_sizeof_u_int16_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (u_int16_t))" "ac_cv_sizeof_u_int16_t" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_u_int16_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (u_int16_t) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_u_int16_t=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_u_int16_t" >&5 +$as_echo "$ac_cv_sizeof_u_int16_t" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_U_INT16_T $ac_cv_sizeof_u_int16_t +_ACEOF + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int32_t" >&5 +$as_echo_n "checking size of int32_t... " >&6; } +if ${ac_cv_sizeof_int32_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (int32_t))" "ac_cv_sizeof_int32_t" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_int32_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (int32_t) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_int32_t=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int32_t" >&5 +$as_echo "$ac_cv_sizeof_int32_t" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_INT32_T $ac_cv_sizeof_int32_t +_ACEOF + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of uint32_t" >&5 +$as_echo_n "checking size of uint32_t... " >&6; } +if ${ac_cv_sizeof_uint32_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (uint32_t))" "ac_cv_sizeof_uint32_t" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_uint32_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (uint32_t) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_uint32_t=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_uint32_t" >&5 +$as_echo "$ac_cv_sizeof_uint32_t" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_UINT32_T $ac_cv_sizeof_uint32_t +_ACEOF + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of u_int32_t" >&5 +$as_echo_n "checking size of u_int32_t... " >&6; } +if ${ac_cv_sizeof_u_int32_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (u_int32_t))" "ac_cv_sizeof_u_int32_t" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_u_int32_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (u_int32_t) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_u_int32_t=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_u_int32_t" >&5 +$as_echo "$ac_cv_sizeof_u_int32_t" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_U_INT32_T $ac_cv_sizeof_u_int32_t +_ACEOF + # The cast to long int works around a bug in the HP C Compiler # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects @@ -13449,36 +14286,111 @@ -if test x$has_char16 = "xyes" ; then - case 1 in - $ac_cv_sizeof_short) SIZE16="short";; - $ac_cv_sizeof_int) SIZE16="int";; - esac +if test "$has_char16" = "yes"; then : + + SIZEOF16=1 + SIZEOF32=2 + else - case 2 in - $ac_cv_sizeof_short) SIZE16="short";; - $ac_cv_sizeof_int) SIZE16="int";; - esac + + SIZEOF16=2 + SIZEOF32=4 + fi -if test x$has_char16 = "xyes" ; then - case 2 in - $ac_cv_sizeof_int) SIZE32="int";; - $ac_cv_sizeof_long) SIZE32="long";; - $ac_cv_sizeof_short) SIZE32="short";; - esac +case $SIZEOF16 in + $ac_cv_sizeof_int16_t) SIZE16="int16_t";; + $ac_cv_sizeof_short) SIZE16="short";; + $ac_cv_sizeof_int) SIZE16="int";; +esac + +case $SIZEOF16 in + $ac_cv_sizeof_uint16_t) USIZE16="uint16_t";; + $ac_cv_sizeof_u_int16_t) USIZE16="u_int16_t";; + $ac_cv_sizeof_short) USIZE16="unsigned short";; + $ac_cv_sizeof_int) USIZE16="unsigned int";; +esac + +case $SIZEOF32 in + $ac_cv_sizeof_int32_t) SIZE32="int32_t";; + $ac_cv_sizeof_int) SIZE32="int";; + $ac_cv_sizeof_long) SIZE32="long";; + $ac_cv_sizeof_short) SIZE32="short";; +esac + +case $SIZEOF32 in + $ac_cv_sizeof_uint32_t) USIZE32="uint32_t";; + $ac_cv_sizeof_u_int32_t) USIZE32="u_int32_t";; + $ac_cv_sizeof_short) USIZE32="unsigned short";; + $ac_cv_sizeof_int) USIZE32="unsigned int";; + $ac_cv_sizeof_long) USIZE32="unsigned long";; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC accepts -Wall" >&5 +$as_echo_n "checking if $CC accepts -Wall... " >&6; } + ac_add_cflags__old_cflags="$CFLAGS" + CFLAGS="-Wall" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #include + +int +main () +{ +puts("Hello, World!"); return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CFLAGS="$ac_add_cflags__old_cflags -Wall" else - case 4 in - $ac_cv_sizeof_int) SIZE32="int";; - $ac_cv_sizeof_long) SIZE32="long";; - $ac_cv_sizeof_short) SIZE32="short";; - esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + CFLAGS="$ac_add_cflags__old_cflags" + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + + +if test -z "$SIZE16"; then : + as_fn_error $? "No 16 bit type found on this platform!" "$LINENO" 5 +fi +if test -z "$SIZE32"; then : + as_fn_error $? "No 32 bit type found on this platform!" "$LINENO" 5 +fi +if test -z "$USIZE16"; then : + as_fn_error $? "No unsigned 16 bit type found on this platform!" "$LINENO" 5 +fi +if test -z "$USIZE32"; then : + as_fn_error $? "No unsigned 32 bit type found on this platform!" "$LINENO" 5 +fi + + + + + + +if test "$ac_cv_header_stdint_h" = "yes"; then : + INCLUDE_STDINT="#include " +elif test "$ac_cv_header_inttypes_h" = "yes"; then : + INCLUDE_STDINT="#include " +elif test "$ac_cv_header_sys_types_h" = "yes"; then : + INCLUDE_STDINT="#include " fi -ac_config_files="$ac_config_files Makefile libspeex/Makefile src/Makefile doc/Makefile include/Makefile include/speex/Makefile speex.pc speexdsp.pc win32/Makefile win32/libspeex/Makefile win32/speexenc/Makefile win32/speexdec/Makefile symbian/Makefile win32/VS2003/Makefile win32/VS2003/tests/Makefile win32/VS2003/libspeex/Makefile win32/VS2003/libspeexdsp/Makefile win32/VS2003/speexdec/Makefile win32/VS2003/speexenc/Makefile win32/VS2005/Makefile win32/VS2005/libspeex/Makefile win32/VS2005/speexdec/Makefile win32/VS2005/speexenc/Makefile win32/VS2005/libspeexdsp/Makefile win32/VS2005/tests/Makefile win32/VS2008/libspeexdsp/Makefile win32/VS2008/Makefile win32/VS2008/speexdec/Makefile win32/VS2008/tests/Makefile win32/VS2008/libspeex/Makefile win32/VS2008/speexenc/Makefile include/speex/speex_config_types.h ti/Makefile ti/speex_C54_test/Makefile ti/speex_C55_test/Makefile ti/speex_C64_test/Makefile" +ac_config_files="$ac_config_files Makefile libspeex/Makefile src/Makefile doc/Makefile Speex.spec include/Makefile include/speex/Makefile speex.pc win32/Makefile win32/libspeex/Makefile win32/speexenc/Makefile win32/speexdec/Makefile symbian/Makefile win32/VS2003/Makefile win32/VS2003/tests/Makefile win32/VS2003/libspeex/Makefile win32/VS2003/speexdec/Makefile win32/VS2003/speexenc/Makefile win32/VS2005/Makefile win32/VS2005/libspeex/Makefile win32/VS2005/speexdec/Makefile win32/VS2005/speexenc/Makefile win32/VS2005/tests/Makefile win32/VS2008/Makefile win32/VS2008/speexdec/Makefile win32/VS2008/tests/Makefile win32/VS2008/libspeex/Makefile win32/VS2008/speexenc/Makefile include/speex/speex_config_types.h ti/Makefile ti/speex_C54_test/Makefile ti/speex_C55_test/Makefile ti/speex_C64_test/Makefile" + + +ac_config_headers="$ac_config_headers config.h" + cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -13574,6 +14486,7 @@ ac_libobjs= ac_ltlibobjs= +U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' @@ -13617,6 +14530,18 @@ Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi +if test -z "${BUILD_BINARIES_TRUE}" && test -z "${BUILD_BINARIES_FALSE}"; then + as_fn_error $? "conditional \"BUILD_BINARIES\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${BUILD_BINARIES_TRUE}" && test -z "${BUILD_BINARIES_FALSE}"; then + as_fn_error $? "conditional \"BUILD_BINARIES\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${BUILD_BINARIES_TRUE}" && test -z "${BUILD_BINARIES_FALSE}"; then + as_fn_error $? "conditional \"BUILD_BINARIES\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi if test -z "${BUILD_KISS_FFT_TRUE}" && test -z "${BUILD_KISS_FFT_FALSE}"; then as_fn_error $? "conditional \"BUILD_KISS_FFT\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 @@ -13625,6 +14550,10 @@ as_fn_error $? "conditional \"BUILD_SMALLFT\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi +if test -z "${BUILD_VORBIS_PSY_TRUE}" && test -z "${BUILD_VORBIS_PSY_FALSE}"; then + as_fn_error $? "conditional \"BUILD_VORBIS_PSY\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 @@ -14022,7 +14951,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by $as_me, which was +This file was extended by speex $as_me 1.2.0, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -14082,13 +15011,13 @@ Configuration commands: $config_commands -Report bugs to the package provider." +Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -config.status +speex config.status 1.2.0 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" @@ -14226,6 +15155,7 @@ enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' @@ -14273,10 +15203,13 @@ GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' @@ -14341,7 +15274,8 @@ finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' +configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' @@ -14393,9 +15327,12 @@ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_import \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +lt_cv_nm_interface \ nm_file_list_spec \ +lt_cv_truncate_bin \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_pic \ lt_prog_compiler_wl \ @@ -14430,7 +15367,7 @@ striplib; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -14457,10 +15394,11 @@ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do +configure_time_dlsearch_path \ +configure_time_lt_sys_library_path; do case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -14469,19 +15407,16 @@ done ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' -# See if we are running on zsh, and set the options which allow our +# See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then +if test -n "\${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' @@ -14496,17 +15431,16 @@ for ac_config_target in $ac_config_targets do case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "libspeex/Makefile") CONFIG_FILES="$CONFIG_FILES libspeex/Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; + "Speex.spec") CONFIG_FILES="$CONFIG_FILES Speex.spec" ;; "include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;; "include/speex/Makefile") CONFIG_FILES="$CONFIG_FILES include/speex/Makefile" ;; "speex.pc") CONFIG_FILES="$CONFIG_FILES speex.pc" ;; - "speexdsp.pc") CONFIG_FILES="$CONFIG_FILES speexdsp.pc" ;; "win32/Makefile") CONFIG_FILES="$CONFIG_FILES win32/Makefile" ;; "win32/libspeex/Makefile") CONFIG_FILES="$CONFIG_FILES win32/libspeex/Makefile" ;; "win32/speexenc/Makefile") CONFIG_FILES="$CONFIG_FILES win32/speexenc/Makefile" ;; @@ -14515,16 +15449,13 @@ "win32/VS2003/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2003/Makefile" ;; "win32/VS2003/tests/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2003/tests/Makefile" ;; "win32/VS2003/libspeex/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2003/libspeex/Makefile" ;; - "win32/VS2003/libspeexdsp/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2003/libspeexdsp/Makefile" ;; "win32/VS2003/speexdec/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2003/speexdec/Makefile" ;; "win32/VS2003/speexenc/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2003/speexenc/Makefile" ;; "win32/VS2005/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2005/Makefile" ;; "win32/VS2005/libspeex/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2005/libspeex/Makefile" ;; "win32/VS2005/speexdec/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2005/speexdec/Makefile" ;; "win32/VS2005/speexenc/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2005/speexenc/Makefile" ;; - "win32/VS2005/libspeexdsp/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2005/libspeexdsp/Makefile" ;; "win32/VS2005/tests/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2005/tests/Makefile" ;; - "win32/VS2008/libspeexdsp/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2008/libspeexdsp/Makefile" ;; "win32/VS2008/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2008/Makefile" ;; "win32/VS2008/speexdec/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2008/speexdec/Makefile" ;; "win32/VS2008/tests/Makefile") CONFIG_FILES="$CONFIG_FILES win32/VS2008/tests/Makefile" ;; @@ -14535,6 +15466,7 @@ "ti/speex_C54_test/Makefile") CONFIG_FILES="$CONFIG_FILES ti/speex_C54_test/Makefile" ;; "ti/speex_C55_test/Makefile") CONFIG_FILES="$CONFIG_FILES ti/speex_C55_test/Makefile" ;; "ti/speex_C64_test/Makefile") CONFIG_FILES="$CONFIG_FILES ti/speex_C64_test/Makefile" ;; + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac @@ -15225,55 +16157,53 @@ ;; "libtool":C) - # See if we are running on zsh, and set the options which allow our + # See if we are running on zsh, and set the options that allow our # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then + if test -n "${ZSH_VERSION+set}"; then setopt NO_GLOB_SUBST fi - cfgfile="${ofile}T" + cfgfile=${ofile}T trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Generated automatically by $as_me ($PACKAGE) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. # -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with this program. If not, see . # The names of the tagged configurations supported by this script. -available_tags="" +available_tags='' + +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} # ### BEGIN LIBTOOL CONFIG @@ -15302,6 +16232,9 @@ # Whether or not to optimize for fast installation. fast_install=$enable_fast_install +# Shared archive member basename,for filename based shared library versioning on AIX. +shared_archive_member_spec=$shared_archive_member_spec + # Shell to use when invoking shell scripts. SHELL=$lt_SHELL @@ -15413,18 +16346,27 @@ # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +# Transform the output of nm into a list of symbols to manually relocate. +global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import + # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix +# The name lister interface. +nm_interface=$lt_lt_cv_nm_interface + # Specify filename containing input files for \$NM. nm_file_list_spec=$lt_nm_file_list_spec -# The root where to search for dependent libraries,and in which our libraries should be installed. +# The root where to search for dependent libraries,and where our libraries should be installed. lt_sysroot=$lt_sysroot +# Command to truncate a binary pipe. +lt_truncate_bin=$lt_lt_cv_truncate_bin + # The name of the directory that contains temporary libtool files. objdir=$objdir @@ -15515,8 +16457,11 @@ # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +# Detected run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path + +# Explicit LT_SYS_LIBRARY_PATH set during ./configure time. +configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path # Whether dlopen is supported. dlopen_support=$enable_dlopen @@ -15609,13 +16554,13 @@ # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# "absolute",i.e impossible to change by setting \$shlibpath_var if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute @@ -15667,13 +16612,72 @@ _LT_EOF + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then +if test set != "${COLLECT_NAMES+set}"; then COLLECT_NAMES= export COLLECT_NAMES fi @@ -15682,7 +16686,7 @@ esac -ltmain="$ac_aux_dir/ltmain.sh" +ltmain=$ac_aux_dir/ltmain.sh # We use sed instead of cat because bash on DJGPP gets confused if @@ -15692,165 +16696,6 @@ sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi - - mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" @@ -15895,10 +16740,4 @@ fi -if test "x$src" = "x"; then -echo "**IMPORTANT**" -echo "You don't seem to have the development package for libogg (libogg-devel) installed. Only the Speex library (libspeex) will be built (no encoder/decoder executable)" -echo "You can download libogg from http://downloads.xiph.org/releases/ogg/" -fi - echo "Type \"make; make install\" to compile and install Speex"; diff -Nru speex-1.2~rc1.2/configure.ac speex-1.2.0/configure.ac --- speex-1.2~rc1.2/configure.ac 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/configure.ac 2016-12-07 23:20:14.000000000 +0000 @@ -1,33 +1,30 @@ dnl Process this file with autoconf to produce a configure script. -*-m4-*- -AC_INIT(libspeex/speex.c) +AC_INIT([speex],[1.2.0],[speex-dev@xiph.org]) + +AC_CONFIG_SRCDIR([libspeex/speex.c]) +AC_CONFIG_MACRO_DIR([m4]) + +dnl enable silent rules on automake 1.11 and later +m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) -AM_CONFIG_HEADER([config.h]) SPEEX_MAJOR_VERSION=1 SPEEX_MINOR_VERSION=1 SPEEX_MICRO_VERSION=16 SPEEX_EXTRA_VERSION= -#SPEEX_VERSION= -#SPEEX_VERSION=$SPEEX_MAJOR_VERSION.$SPEEX_MINOR_VERSION.$SPEEX_MICRO_VERSION$SPEEX_EXTRA_VERSION -SPEEX_VERSION="1.2rc1" SPEEX_LT_CURRENT=6 -SPEEX_LT_REVISION=0 +SPEEX_LT_REVISION=1 SPEEX_LT_AGE=5 + AC_SUBST(SPEEX_LT_CURRENT) AC_SUBST(SPEEX_LT_REVISION) AC_SUBST(SPEEX_LT_AGE) -# For automake. -VERSION=$SPEEX_VERSION -PACKAGE=speex - -AC_SUBST(SPEEX_VERSION) - -AM_INIT_AUTOMAKE($PACKAGE, $VERSION, no-define) -AM_MAINTAINER_MODE +AM_INIT_AUTOMAKE([foreign no-define]) +AM_MAINTAINER_MODE([enable]) AC_CANONICAL_HOST AC_LIBTOOL_WIN32_DLL @@ -87,7 +84,7 @@ has_sse=no ] ) -AC_MSG_RESULT($has_sse) +AC_MSG_RESULT($has_sse) SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -fvisibility=hidden" @@ -112,10 +109,7 @@ AC_CHECK_HEADERS(sys/soundcard.h sys/audioio.h) -XIPH_PATH_OGG([src="src"], [src=""]) -AC_SUBST(src) - -AC_CHECK_LIB(m, sin) +LT_LIB_M # Check for getopt_long; if not found, use included source. AC_CHECK_FUNCS([getopt_long],, @@ -126,9 +120,11 @@ AC_LIBOBJ(getopt) AC_LIBOBJ(getopt1)])]) -AC_CHECK_LIB(winmm, main) +SPEEX_VERSION=$PACKAGE_VERSION + +AC_SUBST(SPEEX_VERSION) -AC_DEFINE_UNQUOTED(SPEEX_VERSION, "${SPEEX_VERSION}", [Complete version string]) +AC_DEFINE_UNQUOTED(SPEEX_VERSION, "${PACKAGE_VERSION}", [Complete version string]) AC_DEFINE_UNQUOTED(SPEEX_MAJOR_VERSION, ${SPEEX_MAJOR_VERSION}, [Version major]) AC_DEFINE_UNQUOTED(SPEEX_MINOR_VERSION, ${SPEEX_MINOR_VERSION}, [Version minor]) AC_DEFINE_UNQUOTED(SPEEX_MICRO_VERSION, ${SPEEX_MICRO_VERSION}, [Version micro]) @@ -170,6 +166,15 @@ AC_DEFINE([DISABLE_FLOAT_API], , [Disable all parts of the API that are using floats]) fi]) +AC_ARG_ENABLE(binaries, [ --disable-binaries Do not build the encoder and decoder programs, only the library]) +if test "$enableval" != no; then + PKG_CHECK_MODULES([OGG], [ogg], + AM_CONDITIONAL([BUILD_BINARIES], true), + AM_CONDITIONAL([BUILD_BINARIES], false)) +else + AM_CONDITIONAL([BUILD_BINARIES], false) +fi + AC_ARG_ENABLE(vbr, [ --disable-vbr Disable VBR and VAD from the codec], [if test "$enableval" = no; then AC_DEFINE([DISABLE_VBR], , [Disable VBR and VAD from the codec]) @@ -188,8 +193,13 @@ AC_ARG_ENABLE(blackfin-asm, [ --enable-blackfin-asm Make use of Blackfin assembly optimizations], [if test "$enableval" = yes; then AC_DEFINE([BFIN_ASM], , [Make use of Blackfin assembly optimizations]) - LDFLAGS="-Wl,-elf2flt=-s100000" fi]) +WINMM_LIBS="" +case $host_os in + uclinux) LDFLAGS="-Wl,-elf2flt=-s100000 $LDFLAGS";; + *mingw*) WINMM_LIBS="-lwinmm";; +esac +AC_SUBST(WINMM_LIBS) AC_ARG_ENABLE(fixed-point-debug, [ --enable-fixed-point-debug Debug fixed-point implementation], [if test "$enableval" = yes; then @@ -202,6 +212,12 @@ AC_DEFINE([TI_C55X], , [Enable support for TI C55X DSP]) fi]) +AC_ARG_ENABLE(vorbis-psy, [ --enable-vorbis-psy Enable the Vorbis psy model], +[if test "$enableval" = yes; then + vorbis_psy=yes; + AC_DEFINE([VORBIS_PSYCHO], , [Enable support for the Vorbis psy model]) +fi]) + AC_ARG_WITH([fft], [AS_HELP_STRING([--with-fft=choice],[use an alternate FFT implementation. The available choices are kiss (default fixed point), smallft (default floating point), gpl-fftw3 and proprietary-intel-mkl])], [FFT=$withval] @@ -217,7 +233,7 @@ ], [gpl-fftw3], [ AC_DEFINE([USE_GPL_FFTW3], [], [Use FFTW3 for FFT]) - PKG_CHECK_MODULES(FFT, fftw3f) + PKG_CHECK_MODULES([FFT], [fftw3f]) ], [proprietary-intel-mkl], [ AC_DEFINE([USE_INTEL_MKL], [], [Use Intel Math Kernel Library for FFT]) @@ -239,70 +255,104 @@ AM_CONDITIONAL(BUILD_SMALLFT, [test "$FFT" = "smallft"]) AC_SUBST(FFT_PKGCONFIG) +AM_CONDITIONAL(BUILD_VORBIS_PSY, [test "x$vorbis_psy" = "xyes"]) -AC_CHECK_SIZEOF(short) -AC_CHECK_SIZEOF(int) -AC_CHECK_SIZEOF(long) - -if test x$has_char16 = "xyes" ; then - case 1 in - $ac_cv_sizeof_short) SIZE16="short";; - $ac_cv_sizeof_int) SIZE16="int";; - esac -else - case 2 in - $ac_cv_sizeof_short) SIZE16="short";; - $ac_cv_sizeof_int) SIZE16="int";; - esac -fi +PKG_CHECK_MODULES([SPEEXDSP], [speexdsp], [AC_DEFINE([USE_SPEEXDSP], [], [Use SpeexDSP library])], [speexdsp_failed=yes]) -if test x$has_char16 = "xyes" ; then - case 2 in - $ac_cv_sizeof_int) SIZE32="int";; - $ac_cv_sizeof_long) SIZE32="long";; - $ac_cv_sizeof_short) SIZE32="short";; - esac -else - case 4 in - $ac_cv_sizeof_int) SIZE32="int";; - $ac_cv_sizeof_long) SIZE32="long";; - $ac_cv_sizeof_short) SIZE32="short";; - esac -fi - -AC_SUBST(SIZE16) -AC_SUBST(SIZE32) -AC_OUTPUT([Makefile libspeex/Makefile src/Makefile doc/Makefile - include/Makefile include/speex/Makefile speex.pc speexdsp.pc +AC_CHECK_SIZEOF([int16_t]) +AC_CHECK_SIZEOF([uint16_t]) +AC_CHECK_SIZEOF([u_int16_t]) +AC_CHECK_SIZEOF([int32_t]) +AC_CHECK_SIZEOF([uint32_t]) +AC_CHECK_SIZEOF([u_int32_t]) +AC_CHECK_SIZEOF([short]) +AC_CHECK_SIZEOF([int]) +AC_CHECK_SIZEOF([long]) + +AS_IF([test "$has_char16" = "yes"], + [ + SIZEOF16=1 + SIZEOF32=2 + ],[ + SIZEOF16=2 + SIZEOF32=4 + ]) + +case $SIZEOF16 in + $ac_cv_sizeof_int16_t) SIZE16="int16_t";; + $ac_cv_sizeof_short) SIZE16="short";; + $ac_cv_sizeof_int) SIZE16="int";; +esac + +case $SIZEOF16 in + $ac_cv_sizeof_uint16_t) USIZE16="uint16_t";; + $ac_cv_sizeof_u_int16_t) USIZE16="u_int16_t";; + $ac_cv_sizeof_short) USIZE16="unsigned short";; + $ac_cv_sizeof_int) USIZE16="unsigned int";; +esac + +case $SIZEOF32 in + $ac_cv_sizeof_int32_t) SIZE32="int32_t";; + $ac_cv_sizeof_int) SIZE32="int";; + $ac_cv_sizeof_long) SIZE32="long";; + $ac_cv_sizeof_short) SIZE32="short";; +esac + +case $SIZEOF32 in + $ac_cv_sizeof_uint32_t) USIZE32="uint32_t";; + $ac_cv_sizeof_u_int32_t) USIZE32="u_int32_t";; + $ac_cv_sizeof_short) USIZE32="unsigned short";; + $ac_cv_sizeof_int) USIZE32="unsigned int";; + $ac_cv_sizeof_long) USIZE32="unsigned long";; +esac + +XIPH_ADD_CFLAGS([-Wall]) + +AS_IF([test -z "$SIZE16"],[AC_MSG_ERROR([No 16 bit type found on this platform!])]) +AS_IF([test -z "$SIZE32"],[AC_MSG_ERROR([No 32 bit type found on this platform!])]) +AS_IF([test -z "$USIZE16"],[AC_MSG_ERROR([No unsigned 16 bit type found on this platform!])]) +AS_IF([test -z "$USIZE32"],[AC_MSG_ERROR([No unsigned 32 bit type found on this platform!])]) + +AC_SUBST([SIZE16]) +AC_SUBST([USIZE16]) +AC_SUBST([SIZE32]) +AC_SUBST([USIZE32]) + +AS_IF([test "$ac_cv_header_stdint_h" = "yes"], [INCLUDE_STDINT="#include "], + [test "$ac_cv_header_inttypes_h" = "yes"], [INCLUDE_STDINT="#include "], + [test "$ac_cv_header_sys_types_h" = "yes"], [INCLUDE_STDINT="#include "]) + +AC_SUBST([INCLUDE_STDINT]) + + +AC_CONFIG_FILES([ + Makefile libspeex/Makefile src/Makefile doc/Makefile Speex.spec + include/Makefile include/speex/Makefile speex.pc win32/Makefile win32/libspeex/Makefile win32/speexenc/Makefile - win32/speexdec/Makefile symbian/Makefile + win32/speexdec/Makefile symbian/Makefile win32/VS2003/Makefile win32/VS2003/tests/Makefile win32/VS2003/libspeex/Makefile - win32/VS2003/libspeexdsp/Makefile win32/VS2003/speexdec/Makefile win32/VS2003/speexenc/Makefile win32/VS2005/Makefile win32/VS2005/libspeex/Makefile win32/VS2005/speexdec/Makefile win32/VS2005/speexenc/Makefile - win32/VS2005/libspeexdsp/Makefile win32/VS2005/tests/Makefile - win32/VS2008/libspeexdsp/Makefile win32/VS2008/Makefile win32/VS2008/speexdec/Makefile win32/VS2008/tests/Makefile win32/VS2008/libspeex/Makefile win32/VS2008/speexenc/Makefile - include/speex/speex_config_types.h ti/Makefile + include/speex/speex_config_types.h ti/Makefile ti/speex_C54_test/Makefile ti/speex_C55_test/Makefile - ti/speex_C64_test/Makefile ]) + ti/speex_C64_test/Makefile +]) -if test "x$src" = "x"; then -echo "**IMPORTANT**" -echo "You don't seem to have the development package for libogg (libogg-devel) installed. Only the Speex library (libspeex) will be built (no encoder/decoder executable)" -echo "You can download libogg from http://downloads.xiph.org/releases/ogg/" -fi +AC_CONFIG_HEADERS([config.h]) + +AC_OUTPUT echo "Type \"make; make install\" to compile and install Speex"; diff -Nru speex-1.2~rc1.2/debian/changelog speex-1.2.0/debian/changelog --- speex-1.2~rc1.2/debian/changelog 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/changelog 2022-04-30 13:03:00.000000000 +0000 @@ -1,3 +1,70 @@ +speex (1.2.0-1ubuntu1) kinetic; urgency=low + + * Merge from Debian unstable. Remaining changes: + - Build with float on armhf. + + -- Gianfranco Costamagna Sat, 30 Apr 2022 15:03:00 +0200 + +speex (1.2.0-1) unstable; urgency=medium + + * Upload to unstable. + + -- Boyuan Yang Thu, 14 Apr 2022 14:40:45 -0400 + +speex (1.2.0-1~exp1) experimental; urgency=medium + + * New upstream release. + * Drop all libspeexdsp packages, provided in a separate source package. + * Drop Doxygen-related codes, upstream no longer provides Doxyfile. + * debian/libspeex1.shlibs: Tighten to (>= 1.2~). + * debian/patches/0002-debian-changes.patch: Dropped, merged upstream. + + -- Boyuan Yang Fri, 01 Apr 2022 18:05:04 -0400 + +speex (1.2~rc1.2-3) unstable; urgency=medium + + * debian/control: Correct Vcs-* fields. + + -- Boyuan Yang Sun, 06 Mar 2022 17:52:41 -0500 + +speex (1.2~rc1.2-2) unstable; urgency=medium + + * debian/control: Take over maint via ITS. (Closes: #1004992, #960501) + * debian/upstream/metadata: Added (upstream GitLab repo). + * debian/changelog: Cleanup trailing spaces. + * debian/compat: Dropped, useless. + * debian/: + + Bump debhelper compat to v13. (Closes: #965827) + + Bump Standards-Version to 4.6.0. + + Apply "wrap-and-sort -abst". + * debian/control: + + Drop manual -dbg package. (Closes: #960498) + + Add missing ${misc:Depends} placeholder. + + Mark speex-doc as Multi-Arch: foreign. + + Let speex suggests speex-doc (Closes: #805897). + + debian/control: Drop ancient Conflicts fields. + * debian/rules: Simplified using dh. + + Do not set custom compile lags. Use default ones since they + are now good enough. + + Do not build extra sse2 library for i386. This greatly complicates + package maintenance with little benefit, and also not really used + by the OS. + + Only use fixed point + arm4-asm optimization for armel. Do not use + fixed point for armhf. (Closes: #736752) + Speex 1.2.0 has newer options, but we need to use them after 1.2.0 + is packaged. + * debian/source/format: Use "3.0 (quilt)". + * debian/patches: Convert from 1.0-format direct changes. + + debian/patches/0001-CVE-2020-23903.patch: + Add patch from Ubuntu. (CVE-2020-23903) + * debian/libspeex{1,dsp1}.shlibs: Set up file based on d/rules. + * debian/speex-doc.manpages: Dropped. section 3 manpage has not been + provided for a long time. + * debian/speex-doc.doc-base: Correctly reference documentation in + usr/share/doc/speex/. + + -- Boyuan Yang Thu, 24 Feb 2022 13:03:43 -0500 + speex (1.2~rc1.2-1.1ubuntu3) jammy; urgency=medium * SECURITY UPDATE: Divide by Zero @@ -457,7 +524,7 @@ speex (1.0.beta4-1) unstable; urgency=low * New upstream release - * Now with VAD - Voice Activity Detection and + * Now with VAD - Voice Activity Detection and DTX - Discontinuous Transmission -- A. Maitland Bottoms Fri, 20 Dec 2002 17:53:02 -0500 diff -Nru speex-1.2~rc1.2/debian/compat speex-1.2.0/debian/compat --- speex-1.2~rc1.2/debian/compat 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/compat 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -7 diff -Nru speex-1.2~rc1.2/debian/control speex-1.2.0/debian/control --- speex-1.2~rc1.2/debian/control 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/control 2022-04-30 12:39:07.000000000 +0000 @@ -1,55 +1,30 @@ Source: speex Section: sound Priority: optional -Maintainer: Ubuntu Developers -XSBC-Original-Maintainer: Ron Lee -Build-Depends: debhelper (>= 8.1.3), libogg-dev, dpkg-dev (>= 1.13.19), dh-autoreconf, pkg-config -Build-Depends-Indep: doxygen, graphviz -Standards-Version: 3.9.5.0 +Maintainer: Debian Multimedia Maintainers +Uploaders: + Boyuan Yang , +Build-Depends: + debhelper-compat (= 13), + libogg-dev, + pkg-config, +Build-Depends-Indep: + doxygen, + graphviz, +Standards-Version: 4.6.0 Homepage: http://www.speex.org/ Vcs-Git: https://salsa.debian.org/debian/speex.git Vcs-Browser: https://salsa.debian.org/debian/speex -Package: speex -Architecture: any -Multi-Arch: foreign -Depends: ${shlibs:Depends} -Description: The Speex codec command line tools - Speex is an audio codec especially designed for compressing voice at low - bit-rates for applications such as voice over IP (VoIP). In some senses, - it is meant to be complementary to the Vorbis codec which places a greater - emphasis on high-quality music reproduction. - . - This package contains the encoder and decoder command-line applications. - -Package: libspeex1 -Architecture: any -Multi-Arch: same -Section: libs -Pre-Depends: ${misc:Pre-Depends} -Depends: ${shlibs:Depends} -Suggests: speex -Conflicts: libopal-2.2 (<= 2.2.11~dfsg1-3), - libopal-2.2-develop (<= 2.2.11~dfsg1-3), - libopal-2.2-ptrace (<= 2.2.11~dfsg1-3), - libopal-2.2.0, - libiaxclient1 (<= 2.0.2-1), - asterisk (<=1:1.4.18.1~dfsg-1), - libmediastreamer0 (<= 2.1.0-1) -Description: The Speex codec runtime library - Speex is an audio codec especially designed for compressing voice at low - bit-rates for applications such as voice over IP (VoIP). In some senses, - it is meant to be complementary to the Vorbis codec which places a greater - emphasis on high-quality music reproduction. - . - This package provides the speex runtime library. - Package: libspeex-dev Architecture: any Multi-Arch: same Section: libdevel -Depends: libspeex1 (= ${binary:Version}) -Suggests: pkg-config +Depends: + libspeex1 (= ${binary:Version}), + ${misc:Depends}, +Suggests: + pkg-config, Description: The Speex codec library development files Speex is an audio codec especially designed for compressing voice at low bit-rates for applications such as voice over IP (VoIP). In some senses, @@ -58,39 +33,48 @@ . This package provides the speex library headers and development files. -Package: libspeexdsp1 +Package: libspeex1 Architecture: any Multi-Arch: same Section: libs -Pre-Depends: ${misc:Pre-Depends} -Depends: ${shlibs:Depends} -Description: The Speex extended runtime library +Pre-Depends: + ${misc:Pre-Depends}, +Depends: + ${misc:Depends}, + ${shlibs:Depends}, +Suggests: + speex, +Description: The Speex codec runtime library Speex is an audio codec especially designed for compressing voice at low bit-rates for applications such as voice over IP (VoIP). In some senses, it is meant to be complementary to the Vorbis codec which places a greater emphasis on high-quality music reproduction. . - This package provides the runtime library of additional functions that - are part of the Speex distribution. + This package provides the speex runtime library. -Package: libspeexdsp-dev +Package: speex Architecture: any -Multi-Arch: same -Section: libdevel -Depends: libspeexdsp1 (= ${binary:Version}), libspeex-dev (= ${binary:Version}) -Suggests: pkg-config -Description: The Speex extended library development files +Depends: + ${misc:Depends}, + ${shlibs:Depends}, +Suggests: + speex-doc, +Description: The Speex codec command line tools Speex is an audio codec especially designed for compressing voice at low bit-rates for applications such as voice over IP (VoIP). In some senses, it is meant to be complementary to the Vorbis codec which places a greater emphasis on high-quality music reproduction. . - This package provides the speex extended library headers and development files. + This package contains the encoder and decoder command-line applications. Package: speex-doc Architecture: all +Multi-Arch: foreign Section: doc -Suggests: speex +Depends: + ${misc:Depends}, +Suggests: + speex, Description: Documentation for speex Speex is an audio codec especially designed for compressing voice at low bit-rates for applications such as voice over IP (VoIP). In some senses, @@ -98,11 +82,3 @@ emphasis on high-quality music reproduction. . This package contains the Speex documentation. - -Package: libspeex-dbg -Section: debug -Priority: extra -Architecture: any -Depends: libspeex1 (= ${binary:Version}), libspeexdsp1 (= ${binary:Version}) -Description: debugging symbols for libspeex and libspeexdsp - This package provides the detached debug symbols for those libraries. diff -Nru speex-1.2~rc1.2/debian/copyright speex-1.2.0/debian/copyright --- speex-1.2~rc1.2/debian/copyright 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/copyright 2022-04-14 21:44:01.000000000 +0000 @@ -1,46 +1,131 @@ -This package was first debianized by A. Maitland Bottoms -on Tue, 16 Jul 2002 10:02:40 -0400. - -Downloaded from http://www.speex.org/ - -Upstream authors: -Jean-Marc Valin -David Rowe - -Copyright 2002-2007 Xiph.org Foundation -Copyright 2002-2007 Jean-Marc Valin -Copyright 2005-2007 Analog Devices Inc. -Copyright 2005-2007 Commonwealth Scientific and Industrial Research - Organisation (CSIRO) -Copyright 1993, 2002, 2006 David Rowe -Copyright 2003 EpicGames -Copyright 1992-1994 Jutta Degener, Carsten Bormann - -License: - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions -are met: - -- Redistributions of source code must retain the above copyright -notice, this list of conditions and the following disclaimer. - -- Redistributions in binary form must reproduce the above copyright -notice, this list of conditions and the following disclaimer in the -documentation and/or other materials provided with the distribution. - -- Neither the name of the Xiph.org Foundation nor the names of its -contributors may be used to endorse or promote products derived from -this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR -CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ +Upstream-Name: speex +Source: https://gitlab.xiph.org/xiph/speex +Comment: + This package was first debianized by A. Maitland Bottoms + on Tue, 16 Jul 2002 10:02:40 -0400. + +Files: * +Copyright: + 2002-2007 Jean-Marc Valin + 1994-2007 Xiph.org Foundation + 1993, 2002, 2006 David Rowe + 2005-2009 Analog Devices Inc. + 2003-2004 Mark Borgerding + 2003-2007 Commonwealth Scientific and Industrial Research Organisation (CSIRO) + 2005 Christopher Montgomery + 2003 EpicGames + 1992-1994 Jutta Degener, Carsten Bormann, Technische Universitaet Berlin + Tahseen Mohammad + 2002, John Edwards + 2005-2007 Psi Systems, Inc. +License: BSD-3-Clause + +Files: doc/manual.pdf +Copyright: + 2002-2007 Jean-Marc Valin + 2002-2007 Xiph.org Foundation +License: GFDL-1.1-or-later + +Files: + include/speex/speex_types.h + libspeex/smallft.c + libspeex/smallft.h +Copyright: + 1994-2002 Xiph.Org Foundation +License: BSD-3-Clause +Comment: + taken from libogg + +Files: + libspeex/lpc.c +Copyright: + 1992, 1993, 1994 by Jutta Degener and Carsten Bormann, Technische Universitaet Berlin + Jean-Marc Valin +License: BSD-3-Clause and custom-1 + +Files: + src/getopt1.c + src/getopt.c + src/getopt_win.h +Copyright: + 1987,88,89,90,91,92,93,94,96,97,98,99 Free Software Foundation, Inc. +License: LGPL-2.0-or-later + +Files: debian/* +Copyright: + 2002 A. Maitland Bottoms +License: BSD-3-Clause + +License: BSD-3-Clause + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + . + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + . + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + . + - Neither the name of the Xiph.org Foundation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + . + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +License: LGPL-2.0-or-later + This file is part of the GNU C Library. + . + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + . + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + . + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If not, + see . + . + On Debian systems, the complete text of the GNU Library General Public + License version 2 can be found in "/usr/share/common-licenses/LGPL-2". + +License: custom-1 + Any use of this software is permitted provided that this notice is not + removed and that neither the authors nor the Technische Universitaet Berlin + are deemed to have made any representations as to the suitability of this + software for any purpose nor are held responsible for any defects of + this software. THERE IS ABSOLUTELY NO WARRANTY FOR THIS SOFTWARE. + . + As a matter of courtesy, the authors request to be informed about uses + this software has found, about bugs in this software, and about any + improvements that may be of general interest. + . + Berlin, 28.11.1994 + Jutta Degener + Carsten Bormann + +License: GFDL-1.1-or-later + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.1 or + any later version published by the Free Software Foundation; + with no Invariant Section, with no Front-Cover Texts, and with no + Back-Cover. + . + On Debian systems, the complete text of the GNU Free Documentation License + version 1.2 can be found in "/usr/share/common-licenses/GFDL-1.2". diff -Nru speex-1.2~rc1.2/debian/libspeex1.install speex-1.2.0/debian/libspeex1.install --- speex-1.2~rc1.2/debian/libspeex1.install 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/debian/libspeex1.install 2022-04-01 22:07:04.000000000 +0000 @@ -0,0 +1,2 @@ +usr/lib/*/libspeex.so.1 +usr/lib/*/libspeex.so.1.* diff -Nru speex-1.2~rc1.2/debian/libspeex1.shlibs speex-1.2.0/debian/libspeex1.shlibs --- speex-1.2~rc1.2/debian/libspeex1.shlibs 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/debian/libspeex1.shlibs 2022-04-14 18:40:42.000000000 +0000 @@ -0,0 +1 @@ +libspeex 1 libspeex1 (>= 1.2~) diff -Nru speex-1.2~rc1.2/debian/libspeex-dev.install speex-1.2.0/debian/libspeex-dev.install --- speex-1.2~rc1.2/debian/libspeex-dev.install 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/libspeex-dev.install 2022-04-14 21:44:01.000000000 +0000 @@ -8,3 +8,4 @@ usr/lib/*/libspeex.a usr/lib/*/libspeex.so usr/lib/*/pkgconfig/speex.pc +usr/share/aclocal/speex.m4 diff -Nru speex-1.2~rc1.2/debian/libspeexdsp-dev.install speex-1.2.0/debian/libspeexdsp-dev.install --- speex-1.2~rc1.2/debian/libspeexdsp-dev.install 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/libspeexdsp-dev.install 1970-01-01 00:00:00.000000000 +0000 @@ -1,8 +0,0 @@ -usr/include/speex/speex_buffer.h -usr/include/speex/speex_echo.h -usr/include/speex/speex_jitter.h -usr/include/speex/speex_preprocess.h -usr/include/speex/speex_resampler.h -usr/lib/*/libspeexdsp.a -usr/lib/*/libspeexdsp.so -usr/lib/*/pkgconfig/speexdsp.pc diff -Nru speex-1.2~rc1.2/debian/not-installed speex-1.2.0/debian/not-installed --- speex-1.2~rc1.2/debian/not-installed 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/debian/not-installed 2022-04-01 22:07:04.000000000 +0000 @@ -0,0 +1,4 @@ +# libtool .la file +usr/lib/*/*.la +# installed by speex-doc +usr/share/doc/speex/manual.pdf diff -Nru speex-1.2~rc1.2/debian/patches/0001-CVE-2020-23903.patch speex-1.2.0/debian/patches/0001-CVE-2020-23903.patch --- speex-1.2~rc1.2/debian/patches/0001-CVE-2020-23903.patch 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/debian/patches/0001-CVE-2020-23903.patch 2022-04-14 18:40:42.000000000 +0000 @@ -0,0 +1,29 @@ +From: Leonidas Da Silva Barbosa +Date: Wed, 23 Feb 2022 10:33:17 -0300 +Subject: CVE-2020-23903 + +Taken from speex/1.2~rc1.2-1.1ubuntu3: + + * SECURITY UPDATE: Divide by Zero + - debian/patches/CVE-2020-23903.patch: guard against + invalid channel numbers in src/wav_io.c. + +Applied-Upstream: https://gitlab.xiph.org/xiph/speex/-/commit/870ff845b32f314aec0036641ffe18aba4916887 +Forwarded: https://gitlab.xiph.org/xiph/speex/-/merge_requests/1 +--- + src/wav_io.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/wav_io.c b/src/wav_io.c +index c2e2bc8..4d77cd7 100644 +--- a/src/wav_io.c ++++ b/src/wav_io.c +@@ -108,7 +108,7 @@ int read_wav_header(FILE *file, int *rate, int *channels, int *format, spx_int32 + stmp = le_short(stmp); + *channels = stmp; + +- if (stmp>2) ++ if (stmp>2 || stmp<1) + { + fprintf (stderr, "Only mono and (intensity) stereo supported\n"); + return -1; diff -Nru speex-1.2~rc1.2/debian/patches/series speex-1.2.0/debian/patches/series --- speex-1.2~rc1.2/debian/patches/series 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/debian/patches/series 2022-04-14 18:40:42.000000000 +0000 @@ -0,0 +1 @@ +0001-CVE-2020-23903.patch diff -Nru speex-1.2~rc1.2/debian/rules speex-1.2.0/debian/rules --- speex-1.2~rc1.2/debian/rules 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/rules 2022-04-30 13:02:56.000000000 +0000 @@ -1,181 +1,40 @@ #!/usr/bin/make -f -# Copyright Ron Lee 2003, 2004, 2007, 2008, 2012 +# -*- makefile -*- +# Uncomment this to turn on verbose mode. +# export DH_VERBOSE=1 + +# see FEATURE AREAS in dpkg-buildflags(1) +export DEB_BUILD_MAINT_OPTIONS = hardening=+all + +# see ENVIRONMENT in dpkg-buildflags(1) +# package maintainers to append CFLAGS +#export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic +# package maintainers to append LDFLAGS +export DEB_LDFLAGS_MAINT_APPEND = -#export DH_VERBOSE=1 -export DH_OPTIONS - -SHELL = /bin/bash - -NUM_CPUS = $(shell getconf _NPROCESSORS_ONLN 2>/dev/null) -PARALLEL = $(subst parallel=,,$(filter parallel=%,$(DEB_BUILD_OPTIONS))) -NJOBS = -j$(or $(PARALLEL),$(NUM_CPUS),1) - - -DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) -DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) - -DEB_HOST_ARCH_CPU ?= $(shell dpkg-architecture -qDEB_HOST_ARCH_CPU) -DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH) -DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH) - - -HARD_CPPFLAGS = -D_FORTIFY_SOURCE=2 -HARD_CFLAGS = -Wformat=2 -HARD_LDFLAGS = -Wl,-z,now - -ifneq (,$(filter-out $(DEB_HOST_ARCH), alpha hppa arm)) - HARD_CFLAGS += -fstack-protector --param ssp-buffer-size=4 -endif -ifneq (,$(filter-out $(DEB_HOST_ARCH), ia64 hppa avr32)) - HARD_LDFLAGS += -Wl,-z,relro -endif - -# Keep dpkg-buildpackage the hell out of messing with our compile flags, -# we should trust upstream to know better than it what to use here. -# We explicitly re-add -g and -O2 here, since not all configurations do -# set it explicitly (and instead rely on autoconf's default of doing that, -# which we override here when we set the hardening flags, if we do). -CPPFLAGS = $(HARD_CPPFLAGS) -CFLAGS = $(HARD_CFLAGS) -g -O2 -CXXFLAGS = $(HARD_CFLAGS) -g -O2 -LDFLAGS = $(HARD_LDFLAGS) - -ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) - CFLAGS = -Wall -g -O0 -endif -ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) - INSTALL_PROGRAM += -s -endif - - -objdir = objs -objdir_sse = objs-sse -objdir_fixedpoint = objs-fixed-point - -all_objs = $(objdir) $(objdir_sse) $(objdir_fixedpoint) -arch_objs = $(objdir) +include /usr/share/dpkg/architecture.mk ifeq ($(DEB_HOST_ARCH_CPU),arm) -ifneq ($(DEB_HOST_ARCH),armhf) -objdir = $(objdir_fixedpoint) +ifeq ($(DEB_HOST_ARCH),armel) EXTRA_CONFIG_FLAGS = --enable-arm4-asm +EXTRA_CONFIG_FLAGS += --enable-fixed-point endif endif -ifneq (,$(filter $(DEB_HOST_ARCH), mips mipsel)) -objdir = $(objdir_fixedpoint) -endif - -ifeq ($(DEB_HOST_ARCH_CPU),i386) -arch_objs += $(objdir_sse) +ifneq (,$(filter $(DEB_HOST_ARCH), armhf mips mipsel)) +EXTRA_CONFIG_FLAGS = --enable-fixed-point endif +%: + dh $@ -clean: - dh_testdir - dh_testroot - $(RM) *-stamp - $(RM) -r $(all_objs) doc/{html,man,latex} - dh_clean - - -# This first empty one is equivalent to declaring it .SECONDARY while we have -# no target specific variables to set. We don't want it removed by default as -# an unnamed intermediate file when the build target is completed. -$(objdir)/config.status: -$(objdir_sse)/config.status: EXTRA_CONFIG_FLAGS += --enable-sse -$(objdir_fixedpoint)/config.status: EXTRA_CONFIG_FLAGS += --enable-fixed-point - -%/config.status: configure - dh_testdir - dh_update_autotools_config - mkdir -p $* - cd $* && ../configure --host=$(DEB_HOST_GNU_TYPE) \ - --build=$(DEB_BUILD_GNU_TYPE) \ - --prefix=/usr \ - --libdir=\$${prefix}/lib/$(DEB_HOST_MULTIARCH) \ - $(EXTRA_CONFIG_FLAGS) \ - CPPFLAGS="$(CPPFLAGS)" \ - CFLAGS="$(CFLAGS)" \ - CXXFLAGS="$(CXXFLAGS)" \ - LDFLAGS="$(LDFLAGS)" - -build: build-arch build-indep - -build-arch: $(foreach d,$(arch_objs),build-target-$(d)-stamp) -build-target-%-stamp : %/config.status - dh_testdir - $(MAKE) $(NJOBS) -C $* - touch $@ - -build-indep: build-indep-stamp -build-indep-stamp: - dh_testdir - doxygen Doxyfile - touch $@ - - -install: install-arch install-indep - -install-arch: install-arch-stamp -install-arch-stamp: build-arch - dh_testdir - cd $(objdir) && $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp - - if [ -d "$(objdir_sse)" ]; then \ - dh_install -plibspeex1 $(objdir_sse)/libspeex/.libs/libspeex.so.* \ - usr/lib/$(DEB_HOST_MULTIARCH)/sse2; \ - dh_install -plibspeexdsp1 $(objdir_sse)/libspeex/.libs/libspeexdsp.so.* \ - usr/lib/$(DEB_HOST_MULTIARCH)/sse2; \ - fi - - dh_install -plibspeex1 $(objdir)/libspeex/.libs/libspeex.so.* \ - usr/lib/$(DEB_HOST_MULTIARCH) - - dh_install -plibspeexdsp1 $(objdir)/libspeex/.libs/libspeexdsp.so.* \ - usr/lib/$(DEB_HOST_MULTIARCH) - - dh_install -plibspeex-dev -plibspeexdsp-dev -pspeex --sourcedir=debian/tmp - touch $@ - -install-indep: build-indep - - -binary: binary-indep binary-arch - -binary-indep: DH_OPTIONS = -i -binary-indep: install-indep - dh_testdir - dh_testroot - dh_installdocs - dh_installchangelogs - dh_compress - dh_fixperms - dh_installdeb - dh_gencontrol - dh_md5sums - dh_builddeb - -binary-arch: install-arch - dh_testdir - dh_testroot - dh_installdocs -a - dh_installman -a - dh_installchangelogs -a - dh_strip -a --dbg-package=libspeex-dbg - dh_compress -a - dh_fixperms -a - dh_makeshlibs -plibspeex1 -V"libspeex1 (>= 1.2~beta3-1)" - dh_makeshlibs -plibspeexdsp1 -V"libspeexdsp1 (>= 1.2~beta3.2-1)" - dh_installdeb -a - dh_shlibdeps -a - dh_gencontrol -a - dh_md5sums -a - dh_builddeb -a - - -.PHONY: clean build build-arch build-indep install install-arch install-indep \ - binary binary-arch binary-indep +override_dh_auto_configure: + dh_auto_configure -- \ + $(EXTRA_CONFIG_FLAGS) \ + --enable-binaries \ + $(NULL) +override_dh_strip: + dh_strip --dbgsym-migration='libspeex-dbg (<< 1.2~rc1.2-2~)' diff -Nru speex-1.2~rc1.2/debian/source/format speex-1.2.0/debian/source/format --- speex-1.2~rc1.2/debian/source/format 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/debian/source/format 2022-04-01 22:07:04.000000000 +0000 @@ -0,0 +1 @@ +3.0 (quilt) diff -Nru speex-1.2~rc1.2/debian/speex-doc.doc-base speex-1.2.0/debian/speex-doc.doc-base --- speex-1.2~rc1.2/debian/speex-doc.doc-base 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/speex-doc.doc-base 2022-04-14 21:44:01.000000000 +0000 @@ -2,14 +2,8 @@ Title: Speex codec and API documentation Author: Jean-Marc Valin, David Rowe Abstract: The PDF documentation describes the Speex codec and the command line - and C interfaces provided by the reference implementation. The HTML docs are - generated by parsing the source with doxygen, to generate the most current API - reference documentation from it. + and C interfaces provided by the reference implementation. Section: Programming/C Format: PDF -Files: /usr/share/doc/speex-doc/manual.pdf.gz - -Format: HTML -Index: /usr/share/doc/speex-doc/html/index.html -Files: /usr/share/doc/speex-doc/html/* +Files: /usr/share/doc/speex/manual.pdf.gz diff -Nru speex-1.2~rc1.2/debian/speex-doc.docs speex-1.2.0/debian/speex-doc.docs --- speex-1.2~rc1.2/debian/speex-doc.docs 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/speex-doc.docs 2022-04-14 21:44:01.000000000 +0000 @@ -1,2 +1 @@ doc/*.pdf -doc/html diff -Nru speex-1.2~rc1.2/debian/speex-doc.manpages speex-1.2.0/debian/speex-doc.manpages --- speex-1.2~rc1.2/debian/speex-doc.manpages 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/speex-doc.manpages 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -doc/man/man3/* diff -Nru speex-1.2~rc1.2/debian/speex.install speex-1.2.0/debian/speex.install --- speex-1.2~rc1.2/debian/speex.install 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/speex.install 2022-04-14 21:44:01.000000000 +0000 @@ -1 +1,2 @@ usr/bin +usr/share/man/man1/ diff -Nru speex-1.2~rc1.2/debian/speex.manpages speex-1.2.0/debian/speex.manpages --- speex-1.2~rc1.2/debian/speex.manpages 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/debian/speex.manpages 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -src/*.1 diff -Nru speex-1.2~rc1.2/debian/upstream/metadata speex-1.2.0/debian/upstream/metadata --- speex-1.2~rc1.2/debian/upstream/metadata 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/debian/upstream/metadata 2022-04-01 22:07:04.000000000 +0000 @@ -0,0 +1,2 @@ +--- +Repository: https://gitlab.xiph.org/xiph/speex diff -Nru speex-1.2~rc1.2/depcomp speex-1.2.0/depcomp --- speex-1.2~rc1.2/depcomp 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/depcomp 2016-12-07 19:52:53.000000000 +0000 @@ -3,7 +3,7 @@ scriptversion=2013-05-30.07; # UTC -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by diff -Nru speex-1.2~rc1.2/doc/Makefile.in speex-1.2.0/doc/Makefile.in --- speex-1.2~rc1.2/doc/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/doc/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -15,7 +15,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -79,12 +89,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = doc -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -138,6 +151,7 @@ am__installdirs = "$(DESTDIR)$(docdir)" DATA = $(doc_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -169,6 +183,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -176,12 +191,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -211,12 +228,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -261,9 +283,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -284,10 +306,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu doc/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign doc/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -487,6 +508,8 @@ mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ uninstall-am uninstall-docDATA +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/Doxyfile speex-1.2.0/Doxyfile --- speex-1.2~rc1.2/Doxyfile 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/Doxyfile 1970-01-01 00:00:00.000000000 +0000 @@ -1,239 +0,0 @@ -# Doxyfile 1.5.5 - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- -DOXYFILE_ENCODING = UTF-8 -PROJECT_NAME = Speex -PROJECT_NUMBER = 1.2~beta4 -OUTPUT_DIRECTORY = doc -CREATE_SUBDIRS = NO -OUTPUT_LANGUAGE = English -BRIEF_MEMBER_DESC = YES -REPEAT_BRIEF = YES -ABBREVIATE_BRIEF = -ALWAYS_DETAILED_SEC = NO -INLINE_INHERITED_MEMB = NO -FULL_PATH_NAMES = NO -STRIP_FROM_PATH = -STRIP_FROM_INC_PATH = -SHORT_NAMES = NO -JAVADOC_AUTOBRIEF = NO -QT_AUTOBRIEF = NO -MULTILINE_CPP_IS_BRIEF = NO -DETAILS_AT_TOP = NO -INHERIT_DOCS = YES -SEPARATE_MEMBER_PAGES = NO -TAB_SIZE = 8 -ALIASES = -OPTIMIZE_OUTPUT_FOR_C = NO -OPTIMIZE_OUTPUT_JAVA = NO -OPTIMIZE_FOR_FORTRAN = NO -OPTIMIZE_OUTPUT_VHDL = NO -BUILTIN_STL_SUPPORT = NO -CPP_CLI_SUPPORT = NO -SIP_SUPPORT = NO -DISTRIBUTE_GROUP_DOC = NO -SUBGROUPING = YES -TYPEDEF_HIDES_STRUCT = NO -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- -EXTRACT_ALL = NO -EXTRACT_PRIVATE = NO -EXTRACT_STATIC = NO -EXTRACT_LOCAL_CLASSES = YES -EXTRACT_LOCAL_METHODS = NO -EXTRACT_ANON_NSPACES = NO -HIDE_UNDOC_MEMBERS = NO -HIDE_UNDOC_CLASSES = NO -HIDE_FRIEND_COMPOUNDS = NO -HIDE_IN_BODY_DOCS = NO -INTERNAL_DOCS = NO -CASE_SENSE_NAMES = YES -HIDE_SCOPE_NAMES = NO -SHOW_INCLUDE_FILES = YES -INLINE_INFO = YES -SORT_MEMBER_DOCS = YES -SORT_BRIEF_DOCS = NO -SORT_GROUP_NAMES = NO -SORT_BY_SCOPE_NAME = NO -GENERATE_TODOLIST = YES -GENERATE_TESTLIST = YES -GENERATE_BUGLIST = YES -GENERATE_DEPRECATEDLIST= YES -ENABLED_SECTIONS = -MAX_INITIALIZER_LINES = 30 -SHOW_USED_FILES = YES -SHOW_DIRECTORIES = YES -FILE_VERSION_FILTER = -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- -QUIET = NO -WARNINGS = YES -WARN_IF_UNDOCUMENTED = YES -WARN_IF_DOC_ERROR = YES -WARN_NO_PARAMDOC = NO -WARN_FORMAT = "$file:$line: $text" -WARN_LOGFILE = -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- -INPUT = include/speex -INPUT_ENCODING = UTF-8 -FILE_PATTERNS = -RECURSIVE = NO -EXCLUDE = -EXCLUDE_SYMLINKS = NO -EXCLUDE_PATTERNS = speex_config_types.h -EXCLUDE_SYMBOLS = -EXAMPLE_PATH = -EXAMPLE_PATTERNS = -EXAMPLE_RECURSIVE = NO -IMAGE_PATH = -INPUT_FILTER = -FILTER_PATTERNS = -FILTER_SOURCE_FILES = NO -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- -SOURCE_BROWSER = NO -INLINE_SOURCES = NO -STRIP_CODE_COMMENTS = YES -REFERENCED_BY_RELATION = YES -REFERENCES_RELATION = YES -REFERENCES_LINK_SOURCE = YES -USE_HTAGS = NO -VERBATIM_HEADERS = YES -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- -ALPHABETICAL_INDEX = NO -COLS_IN_ALPHA_INDEX = 5 -IGNORE_PREFIX = -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- -GENERATE_HTML = YES -HTML_OUTPUT = html -HTML_FILE_EXTENSION = .html -HTML_HEADER = -HTML_FOOTER = -HTML_STYLESHEET = -HTML_ALIGN_MEMBERS = YES -GENERATE_HTMLHELP = NO -GENERATE_DOCSET = NO -DOCSET_FEEDNAME = "Doxygen generated docs" -DOCSET_BUNDLE_ID = org.doxygen.Project -HTML_DYNAMIC_SECTIONS = NO -CHM_FILE = -HHC_LOCATION = -GENERATE_CHI = NO -BINARY_TOC = NO -TOC_EXPAND = NO -DISABLE_INDEX = NO -ENUM_VALUES_PER_LINE = 4 -GENERATE_TREEVIEW = NO -TREEVIEW_WIDTH = 250 -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- -GENERATE_LATEX = NO -LATEX_OUTPUT = latex -LATEX_CMD_NAME = latex -MAKEINDEX_CMD_NAME = makeindex -COMPACT_LATEX = NO -PAPER_TYPE = a4wide -EXTRA_PACKAGES = -LATEX_HEADER = -PDF_HYPERLINKS = YES -USE_PDFLATEX = YES -LATEX_BATCHMODE = NO -LATEX_HIDE_INDICES = NO -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- -GENERATE_RTF = NO -RTF_OUTPUT = rtf -COMPACT_RTF = NO -RTF_HYPERLINKS = NO -RTF_STYLESHEET_FILE = -RTF_EXTENSIONS_FILE = -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- -GENERATE_MAN = NO -MAN_OUTPUT = man -MAN_EXTENSION = .3 -MAN_LINKS = NO -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- -GENERATE_XML = NO -XML_OUTPUT = xml -XML_SCHEMA = -XML_DTD = -XML_PROGRAMLISTING = YES -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- -GENERATE_AUTOGEN_DEF = NO -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- -GENERATE_PERLMOD = NO -PERLMOD_LATEX = NO -PERLMOD_PRETTY = YES -PERLMOD_MAKEVAR_PREFIX = -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- -ENABLE_PREPROCESSING = YES -MACRO_EXPANSION = NO -EXPAND_ONLY_PREDEF = NO -SEARCH_INCLUDES = YES -INCLUDE_PATH = -INCLUDE_FILE_PATTERNS = -PREDEFINED = -EXPAND_AS_DEFINED = -SKIP_FUNCTION_MACROS = YES -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- -TAGFILES = -GENERATE_TAGFILE = -ALLEXTERNALS = NO -EXTERNAL_GROUPS = YES -PERL_PATH = /usr/bin/perl -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- -CLASS_DIAGRAMS = YES -MSCGEN_PATH = -HIDE_UNDOC_RELATIONS = YES -HAVE_DOT = YES -CLASS_GRAPH = YES -COLLABORATION_GRAPH = YES -GROUP_GRAPHS = YES -UML_LOOK = NO -TEMPLATE_RELATIONS = YES -INCLUDE_GRAPH = YES -INCLUDED_BY_GRAPH = YES -CALL_GRAPH = NO -CALLER_GRAPH = NO -GRAPHICAL_HIERARCHY = YES -DIRECTORY_GRAPH = YES -DOT_IMAGE_FORMAT = png -DOT_PATH = -DOTFILE_DIRS = -DOT_GRAPH_MAX_NODES = 50 -MAX_DOT_GRAPH_DEPTH = 0 -DOT_TRANSPARENT = YES -DOT_MULTI_TARGETS = NO -GENERATE_LEGEND = YES -DOT_CLEANUP = YES -#--------------------------------------------------------------------------- -# Configuration::additions related to the search engine -#--------------------------------------------------------------------------- -SEARCHENGINE = NO diff -Nru speex-1.2~rc1.2/include/Makefile.in speex-1.2.0/include/Makefile.in --- speex-1.2~rc1.2/include/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -14,7 +14,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -78,12 +88,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = include -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -143,6 +156,7 @@ ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -199,6 +213,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -206,12 +221,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -241,12 +258,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -291,9 +313,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -313,10 +335,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu include/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign include/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -611,6 +632,8 @@ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/include/speex/Makefile.am speex-1.2.0/include/speex/Makefile.am --- speex-1.2~rc1.2/include/speex/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/Makefile.am 2015-07-06 15:02:11.000000000 +0000 @@ -3,7 +3,7 @@ nodist_pkginclude_HEADERS = speex_config_types.h -pkginclude_HEADERS = speex.h speex_bits.h speex_buffer.h speex_callbacks.h \ - speex_echo.h speex_header.h speex_jitter.h speex_preprocess.h speex_resampler.h \ +pkginclude_HEADERS = speex.h speex_bits.h speex_callbacks.h \ + speex_header.h \ speex_stereo.h speex_types.h diff -Nru speex-1.2~rc1.2/include/speex/Makefile.in speex-1.2.0/include/speex/Makefile.in --- speex-1.2~rc1.2/include/speex/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -18,7 +18,17 @@ #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -82,13 +92,16 @@ build_triplet = @build@ host_triplet = @host@ subdir = include/speex -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(srcdir)/speex_config_types.h.in $(pkginclude_HEADERS) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(pkginclude_HEADERS) \ + $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = speex_config_types.h @@ -161,6 +174,8 @@ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags +am__DIST_COMMON = $(srcdir)/Makefile.in \ + $(srcdir)/speex_config_types.h.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -192,6 +207,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -199,12 +215,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -234,12 +252,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -284,9 +307,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -294,8 +317,8 @@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ nodist_pkginclude_HEADERS = speex_config_types.h -pkginclude_HEADERS = speex.h speex_bits.h speex_buffer.h speex_callbacks.h \ - speex_echo.h speex_header.h speex_jitter.h speex_preprocess.h speex_resampler.h \ +pkginclude_HEADERS = speex.h speex_bits.h speex_callbacks.h \ + speex_header.h \ speex_stereo.h speex_types.h all: all-am @@ -310,10 +333,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/speex/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/speex/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu include/speex/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign include/speex/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -586,6 +608,8 @@ tags tags-am uninstall uninstall-am \ uninstall-nodist_pkgincludeHEADERS uninstall-pkgincludeHEADERS +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/include/speex/speex_bits.h speex-1.2.0/include/speex/speex_bits.h --- speex-1.2~rc1.2/include/speex/speex_bits.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex_bits.h 2015-07-06 15:02:11.000000000 +0000 @@ -7,18 +7,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -77,18 +77,18 @@ void speex_bits_rewind(SpeexBits *bits); /** Initializes the bit-stream from the data in an area of memory */ -void speex_bits_read_from(SpeexBits *bits, char *bytes, int len); +void speex_bits_read_from(SpeexBits *bits, const char *bytes, int len); /** Append bytes to the bit-stream - * + * * @param bits Bit-stream to operate on * @param bytes pointer to the bytes what will be appended * @param len Number of bytes of append */ -void speex_bits_read_whole_bytes(SpeexBits *bits, char *bytes, int len); +void speex_bits_read_whole_bytes(SpeexBits *bits, const char *bytes, int len); /** Write the content of a bit-stream to an area of memory - * + * * @param bits Bit-stream to operate on * @param bytes Memory location where to write the bits * @param max_len Maximum number of bytes to write (i.e. size of the "bytes" buffer) @@ -129,8 +129,8 @@ */ int speex_bits_nbytes(SpeexBits *bits); -/** Same as speex_bits_unpack_unsigned, but without modifying the cursor position - * +/** Same as speex_bits_unpack_unsigned, but without modifying the cursor position + * * @param bits Bit-stream to operate on * @param nbBits Number of bits to look for * @return Value of the bits peeked, interpreted as unsigned @@ -138,14 +138,14 @@ unsigned int speex_bits_peek_unsigned(SpeexBits *bits, int nbBits); /** Get the value of the next bit in the stream, without modifying the - * "cursor" position - * + * "cursor" position + * * @param bits Bit-stream to operate on * @return Value of the bit peeked (one bit only) */ int speex_bits_peek(SpeexBits *bits); -/** Advances the position of the "bit cursor" in the stream +/** Advances the position of the "bit cursor" in the stream * * @param bits Bit-stream to operate on * @param n Number of bits to advance @@ -159,8 +159,8 @@ */ int speex_bits_remaining(SpeexBits *bits); -/** Insert a terminator so that the data can be sent as a packet while auto-detecting - * the number of frames in each packet +/** Insert a terminator so that the data can be sent as a packet while auto-detecting + * the number of frames in each packet * * @param bits Bit-stream to operate on */ diff -Nru speex-1.2~rc1.2/include/speex/speex_buffer.h speex-1.2.0/include/speex/speex_buffer.h --- speex-1.2~rc1.2/include/speex/speex_buffer.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex_buffer.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,68 +0,0 @@ -/* Copyright (C) 2007 Jean-Marc Valin - - File: speex_buffer.h - This is a very simple ring buffer implementation. It is not thread-safe - so you need to do your own locking. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef SPEEX_BUFFER_H -#define SPEEX_BUFFER_H - -#include "speex/speex_types.h" - -#ifdef __cplusplus -extern "C" { -#endif - -struct SpeexBuffer_; -typedef struct SpeexBuffer_ SpeexBuffer; - -SpeexBuffer *speex_buffer_init(int size); - -void speex_buffer_destroy(SpeexBuffer *st); - -int speex_buffer_write(SpeexBuffer *st, void *data, int len); - -int speex_buffer_writezeros(SpeexBuffer *st, int len); - -int speex_buffer_read(SpeexBuffer *st, void *data, int len); - -int speex_buffer_get_available(SpeexBuffer *st); - -int speex_buffer_resize(SpeexBuffer *st, int len); - -#ifdef __cplusplus -} -#endif - -#endif - - - - diff -Nru speex-1.2~rc1.2/include/speex/speex_callbacks.h speex-1.2.0/include/speex/speex_callbacks.h --- speex-1.2~rc1.2/include/speex/speex_callbacks.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex_callbacks.h 2015-07-06 15:02:11.000000000 +0000 @@ -7,18 +7,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR diff -Nru speex-1.2~rc1.2/include/speex/speex_config_types.h.in speex-1.2.0/include/speex/speex_config_types.h.in --- speex-1.2~rc1.2/include/speex/speex_config_types.h.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex_config_types.h.in 2015-07-06 15:02:11.000000000 +0000 @@ -1,11 +1,12 @@ #ifndef __SPEEX_TYPES_H__ #define __SPEEX_TYPES_H__ -/* these are filled in by configure */ +@INCLUDE_STDINT@ + typedef @SIZE16@ spx_int16_t; -typedef unsigned @SIZE16@ spx_uint16_t; +typedef @USIZE16@ spx_uint16_t; typedef @SIZE32@ spx_int32_t; -typedef unsigned @SIZE32@ spx_uint32_t; +typedef @USIZE32@ spx_uint32_t; #endif diff -Nru speex-1.2~rc1.2/include/speex/speex_echo.h speex-1.2.0/include/speex/speex_echo.h --- speex-1.2~rc1.2/include/speex/speex_echo.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex_echo.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,170 +0,0 @@ -/* Copyright (C) Jean-Marc Valin */ -/** - @file speex_echo.h - @brief Echo cancellation -*/ -/* - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef SPEEX_ECHO_H -#define SPEEX_ECHO_H -/** @defgroup SpeexEchoState SpeexEchoState: Acoustic echo canceller - * This is the acoustic echo canceller module. - * @{ - */ -#include "speex/speex_types.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/** Obtain frame size used by the AEC */ -#define SPEEX_ECHO_GET_FRAME_SIZE 3 - -/** Set sampling rate */ -#define SPEEX_ECHO_SET_SAMPLING_RATE 24 -/** Get sampling rate */ -#define SPEEX_ECHO_GET_SAMPLING_RATE 25 - -/* Can't set window sizes */ -/** Get size of impulse response (int32) */ -#define SPEEX_ECHO_GET_IMPULSE_RESPONSE_SIZE 27 - -/* Can't set window content */ -/** Get impulse response (int32[]) */ -#define SPEEX_ECHO_GET_IMPULSE_RESPONSE 29 - -/** Internal echo canceller state. Should never be accessed directly. */ -struct SpeexEchoState_; - -/** @class SpeexEchoState - * This holds the state of the echo canceller. You need one per channel. -*/ - -/** Internal echo canceller state. Should never be accessed directly. */ -typedef struct SpeexEchoState_ SpeexEchoState; - -/** Creates a new echo canceller state - * @param frame_size Number of samples to process at one time (should correspond to 10-20 ms) - * @param filter_length Number of samples of echo to cancel (should generally correspond to 100-500 ms) - * @return Newly-created echo canceller state - */ -SpeexEchoState *speex_echo_state_init(int frame_size, int filter_length); - -/** Creates a new multi-channel echo canceller state - * @param frame_size Number of samples to process at one time (should correspond to 10-20 ms) - * @param filter_length Number of samples of echo to cancel (should generally correspond to 100-500 ms) - * @param nb_mic Number of microphone channels - * @param nb_speakers Number of speaker channels - * @return Newly-created echo canceller state - */ -SpeexEchoState *speex_echo_state_init_mc(int frame_size, int filter_length, int nb_mic, int nb_speakers); - -/** Destroys an echo canceller state - * @param st Echo canceller state -*/ -void speex_echo_state_destroy(SpeexEchoState *st); - -/** Performs echo cancellation a frame, based on the audio sent to the speaker (no delay is added - * to playback in this form) - * - * @param st Echo canceller state - * @param rec Signal from the microphone (near end + far end echo) - * @param play Signal played to the speaker (received from far end) - * @param out Returns near-end signal with echo removed - */ -void speex_echo_cancellation(SpeexEchoState *st, const spx_int16_t *rec, const spx_int16_t *play, spx_int16_t *out); - -/** Performs echo cancellation a frame (deprecated) */ -void speex_echo_cancel(SpeexEchoState *st, const spx_int16_t *rec, const spx_int16_t *play, spx_int16_t *out, spx_int32_t *Yout); - -/** Perform echo cancellation using internal playback buffer, which is delayed by two frames - * to account for the delay introduced by most soundcards (but it could be off!) - * @param st Echo canceller state - * @param rec Signal from the microphone (near end + far end echo) - * @param out Returns near-end signal with echo removed -*/ -void speex_echo_capture(SpeexEchoState *st, const spx_int16_t *rec, spx_int16_t *out); - -/** Let the echo canceller know that a frame was just queued to the soundcard - * @param st Echo canceller state - * @param play Signal played to the speaker (received from far end) -*/ -void speex_echo_playback(SpeexEchoState *st, const spx_int16_t *play); - -/** Reset the echo canceller to its original state - * @param st Echo canceller state - */ -void speex_echo_state_reset(SpeexEchoState *st); - -/** Used like the ioctl function to control the echo canceller parameters - * - * @param st Echo canceller state - * @param request ioctl-type request (one of the SPEEX_ECHO_* macros) - * @param ptr Data exchanged to-from function - * @return 0 if no error, -1 if request in unknown - */ -int speex_echo_ctl(SpeexEchoState *st, int request, void *ptr); - - - -struct SpeexDecorrState_; - -typedef struct SpeexDecorrState_ SpeexDecorrState; - - -/** Create a state for the channel decorrelation algorithm - This is useful for multi-channel echo cancellation only - * @param rate Sampling rate - * @param channels Number of channels (it's a bit pointless if you don't have at least 2) - * @param frame_size Size of the frame to process at ones (counting samples *per* channel) -*/ -SpeexDecorrState *speex_decorrelate_new(int rate, int channels, int frame_size); - -/** Remove correlation between the channels by modifying the phase and possibly - adding noise in a way that is not (or little) perceptible. - * @param st Decorrelator state - * @param in Input audio in interleaved format - * @param out Result of the decorrelation (out *may* alias in) - * @param strength How much alteration of the audio to apply from 0 to 100. -*/ -void speex_decorrelate(SpeexDecorrState *st, const spx_int16_t *in, spx_int16_t *out, int strength); - -/** Destroy a Decorrelation state - * @param st State to destroy -*/ -void speex_decorrelate_destroy(SpeexDecorrState *st); - - -#ifdef __cplusplus -} -#endif - - -/** @}*/ -#endif diff -Nru speex-1.2~rc1.2/include/speex/speex.h speex-1.2.0/include/speex/speex.h --- speex-1.2~rc1.2/include/speex/speex.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex.h 2015-07-06 15:02:11.000000000 +0000 @@ -7,18 +7,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -40,8 +40,8 @@ * @{ */ -#include "speex/speex_bits.h" -#include "speex/speex_types.h" +#include "speex_types.h" +#include "speex_bits.h" #ifdef __cplusplus extern "C" { @@ -137,7 +137,8 @@ #define SPEEX_GET_SUBMODE_ENCODING 37 /*#define SPEEX_SET_LOOKAHEAD 38*/ -/** Returns the lookahead used by Speex */ +/** Returns the lookahead used by Speex separately for an encoder and a decoder. + * Sum encoder and decoder lookahead values to get the total codec lookahead. */ #define SPEEX_GET_LOOKAHEAD 39 /** Sets tuning for packet-loss concealment (expected loss rate) */ @@ -245,14 +246,14 @@ /** Query function for a mode */ typedef int (*mode_query_func)(const void *mode, int request, void *ptr); -/** Struct defining a Speex mode */ +/** Struct defining a Speex mode */ typedef struct SpeexMode { /** Pointer to the low-level mode data */ const void *mode; /** Pointer to the mode query function */ mode_query_func query; - + /** The name of the mode (you should not rely on this to identify the mode)*/ const char *modeName; @@ -290,25 +291,25 @@ } SpeexMode; /** - * Returns a handle to a newly created Speex encoder state structure. For now, - * the "mode" argument can be &nb_mode or &wb_mode . In the future, more modes - * may be added. Note that for now if you have more than one channels to + * Returns a handle to a newly created Speex encoder state structure. For now, + * the "mode" argument can be &nb_mode or &wb_mode . In the future, more modes + * may be added. Note that for now if you have more than one channels to * encode, you need one state per channel. * - * @param mode The mode to use (either speex_nb_mode or speex_wb.mode) + * @param mode The mode to use (either speex_nb_mode or speex_wb.mode) * @return A newly created encoder state or NULL if state allocation fails */ void *speex_encoder_init(const SpeexMode *mode); -/** Frees all resources associated to an existing Speex encoder state. +/** Frees all resources associated to an existing Speex encoder state. * @param state Encoder state to be destroyed */ void speex_encoder_destroy(void *state); /** Uses an existing encoder state to encode one frame of speech pointed to by "in". The encoded bit-stream is saved in "bits". @param state Encoder state - @param in Frame that will be encoded with a +-2^15 range. This data MAY be - overwritten by the encoder and should be considered uninitialised + @param in Frame that will be encoded with a +-2^15 range. This data MAY be + overwritten by the encoder and should be considered uninitialised after the call. @param bits Bit-stream where the data will be written @return 0 if frame needs not be transmitted (DTX only), 1 otherwise @@ -334,14 +335,14 @@ int speex_encoder_ctl(void *state, int request, void *ptr); -/** Returns a handle to a newly created decoder state structure. For now, +/** Returns a handle to a newly created decoder state structure. For now, * the mode argument can be &nb_mode or &wb_mode . In the future, more modes * may be added. Note that for now if you have more than one channels to * decode, you need one state per channel. * * @param mode Speex mode (one of speex_nb_mode or speex_wb_mode) * @return A newly created decoder state or NULL if state allocation fails - */ + */ void *speex_decoder_init(const SpeexMode *mode); /** Frees all resources associated to an existing decoder state. diff -Nru speex-1.2~rc1.2/include/speex/speex_header.h speex-1.2.0/include/speex/speex_header.h --- speex-1.2~rc1.2/include/speex/speex_header.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex_header.h 2015-07-06 15:02:11.000000000 +0000 @@ -7,18 +7,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -41,7 +41,7 @@ * @{ */ -#include "speex/speex_types.h" +#include "speex_types.h" #ifdef __cplusplus extern "C" { @@ -58,7 +58,7 @@ /** Speex header info for file-based formats */ typedef struct SpeexHeader { char speex_string[SPEEX_HEADER_STRING_LENGTH]; /**< Identifies a Speex bit-stream, always set to "Speex " */ - char speex_version[SPEEX_HEADER_VERSION_LENGTH]; /**< Speex version */ + char speex_version[SPEEX_HEADER_VERSION_LENGTH]; /**< Speex version */ spx_int32_t speex_version_id; /**< Version for Speex (for checking compatibility) */ spx_int32_t header_size; /**< Total size of the header ( sizeof(SpeexHeader) ) */ spx_int32_t rate; /**< Sampling rate used */ diff -Nru speex-1.2~rc1.2/include/speex/speex_jitter.h speex-1.2.0/include/speex/speex_jitter.h --- speex-1.2~rc1.2/include/speex/speex_jitter.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex_jitter.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,197 +0,0 @@ -/* Copyright (C) 2002 Jean-Marc Valin */ -/** - @file speex_jitter.h - @brief Adaptive jitter buffer for Speex -*/ -/* - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - - Neither the name of the Xiph.org Foundation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR - CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*/ - -#ifndef SPEEX_JITTER_H -#define SPEEX_JITTER_H -/** @defgroup JitterBuffer JitterBuffer: Adaptive jitter buffer - * This is the jitter buffer that reorders UDP/RTP packets and adjusts the buffer size - * to maintain good quality and low latency. - * @{ - */ - -#include "speex/speex_types.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/** Generic adaptive jitter buffer state */ -struct JitterBuffer_; - -/** Generic adaptive jitter buffer state */ -typedef struct JitterBuffer_ JitterBuffer; - -/** Definition of an incoming packet */ -typedef struct _JitterBufferPacket JitterBufferPacket; - -/** Definition of an incoming packet */ -struct _JitterBufferPacket { - char *data; /**< Data bytes contained in the packet */ - spx_uint32_t len; /**< Length of the packet in bytes */ - spx_uint32_t timestamp; /**< Timestamp for the packet */ - spx_uint32_t span; /**< Time covered by the packet (same units as timestamp) */ - spx_uint16_t sequence; /**< RTP Sequence number if available (0 otherwise) */ - spx_uint32_t user_data; /**< Put whatever data you like here (it's ignored by the jitter buffer) */ -}; - -/** Packet has been retrieved */ -#define JITTER_BUFFER_OK 0 -/** Packet is lost or is late */ -#define JITTER_BUFFER_MISSING 1 -/** A "fake" packet is meant to be inserted here to increase buffering */ -#define JITTER_BUFFER_INSERTION 2 -/** There was an error in the jitter buffer */ -#define JITTER_BUFFER_INTERNAL_ERROR -1 -/** Invalid argument */ -#define JITTER_BUFFER_BAD_ARGUMENT -2 - - -/** Set minimum amount of extra buffering required (margin) */ -#define JITTER_BUFFER_SET_MARGIN 0 -/** Get minimum amount of extra buffering required (margin) */ -#define JITTER_BUFFER_GET_MARGIN 1 -/* JITTER_BUFFER_SET_AVAILABLE_COUNT wouldn't make sense */ - -/** Get the amount of available packets currently buffered */ -#define JITTER_BUFFER_GET_AVAILABLE_COUNT 3 -/** Included because of an early misspelling (will remove in next release) */ -#define JITTER_BUFFER_GET_AVALIABLE_COUNT 3 - -/** Assign a function to destroy unused packet. When setting that, the jitter - buffer no longer copies packet data. */ -#define JITTER_BUFFER_SET_DESTROY_CALLBACK 4 -/** */ -#define JITTER_BUFFER_GET_DESTROY_CALLBACK 5 - -/** Tell the jitter buffer to only adjust the delay in multiples of the step parameter provided */ -#define JITTER_BUFFER_SET_DELAY_STEP 6 -/** */ -#define JITTER_BUFFER_GET_DELAY_STEP 7 - -/** Tell the jitter buffer to only do concealment in multiples of the size parameter provided */ -#define JITTER_BUFFER_SET_CONCEALMENT_SIZE 8 -#define JITTER_BUFFER_GET_CONCEALMENT_SIZE 9 - -/** Absolute max amount of loss that can be tolerated regardless of the delay. Typical loss - should be half of that or less. */ -#define JITTER_BUFFER_SET_MAX_LATE_RATE 10 -#define JITTER_BUFFER_GET_MAX_LATE_RATE 11 - -/** Equivalent cost of one percent late packet in timestamp units */ -#define JITTER_BUFFER_SET_LATE_COST 12 -#define JITTER_BUFFER_GET_LATE_COST 13 - - -/** Initialises jitter buffer - * - * @param step_size Starting value for the size of concleanment packets and delay - adjustment steps. Can be changed at any time using JITTER_BUFFER_SET_DELAY_STEP - and JITTER_BUFFER_GET_CONCEALMENT_SIZE. - * @return Newly created jitter buffer state - */ -JitterBuffer *jitter_buffer_init(int step_size); - -/** Restores jitter buffer to its original state - * - * @param jitter Jitter buffer state - */ -void jitter_buffer_reset(JitterBuffer *jitter); - -/** Destroys jitter buffer - * - * @param jitter Jitter buffer state - */ -void jitter_buffer_destroy(JitterBuffer *jitter); - -/** Put one packet into the jitter buffer - * - * @param jitter Jitter buffer state - * @param packet Incoming packet -*/ -void jitter_buffer_put(JitterBuffer *jitter, const JitterBufferPacket *packet); - -/** Get one packet from the jitter buffer - * - * @param jitter Jitter buffer state - * @param packet Returned packet - * @param desired_span Number of samples (or units) we wish to get from the buffer (no guarantee) - * @param current_timestamp Timestamp for the returned packet -*/ -int jitter_buffer_get(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t desired_span, spx_int32_t *start_offset); - -/** Used right after jitter_buffer_get() to obtain another packet that would have the same timestamp. - * This is mainly useful for media where a single "frame" can be split into several packets. - * - * @param jitter Jitter buffer state - * @param packet Returned packet - */ -int jitter_buffer_get_another(JitterBuffer *jitter, JitterBufferPacket *packet); - -/** Get pointer timestamp of jitter buffer - * - * @param jitter Jitter buffer state -*/ -int jitter_buffer_get_pointer_timestamp(JitterBuffer *jitter); - -/** Advance by one tick - * - * @param jitter Jitter buffer state -*/ -void jitter_buffer_tick(JitterBuffer *jitter); - -/** Telling the jitter buffer about the remaining data in the application buffer - * @param jitter Jitter buffer state - * @param rem Amount of data buffered by the application (timestamp units) - */ -void jitter_buffer_remaining_span(JitterBuffer *jitter, spx_uint32_t rem); - -/** Used like the ioctl function to control the jitter buffer parameters - * - * @param jitter Jitter buffer state - * @param request ioctl-type request (one of the JITTER_BUFFER_* macros) - * @param ptr Data exchanged to-from function - * @return 0 if no error, -1 if request in unknown -*/ -int jitter_buffer_ctl(JitterBuffer *jitter, int request, void *ptr); - -int jitter_buffer_update_delay(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t *start_offset); - -/* @} */ - -#ifdef __cplusplus -} -#endif - -#endif diff -Nru speex-1.2~rc1.2/include/speex/speex_preprocess.h speex-1.2.0/include/speex/speex_preprocess.h --- speex-1.2~rc1.2/include/speex/speex_preprocess.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex_preprocess.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,219 +0,0 @@ -/* Copyright (C) 2003 Epic Games - Written by Jean-Marc Valin */ -/** - * @file speex_preprocess.h - * @brief Speex preprocessor. The preprocess can do noise suppression, - * residual echo suppression (after using the echo canceller), automatic - * gain control (AGC) and voice activity detection (VAD). -*/ -/* - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef SPEEX_PREPROCESS_H -#define SPEEX_PREPROCESS_H -/** @defgroup SpeexPreprocessState SpeexPreprocessState: The Speex preprocessor - * This is the Speex preprocessor. The preprocess can do noise suppression, - * residual echo suppression (after using the echo canceller), automatic - * gain control (AGC) and voice activity detection (VAD). - * @{ - */ - -#include "speex/speex_types.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/** State of the preprocessor (one per channel). Should never be accessed directly. */ -struct SpeexPreprocessState_; - -/** State of the preprocessor (one per channel). Should never be accessed directly. */ -typedef struct SpeexPreprocessState_ SpeexPreprocessState; - - -/** Creates a new preprocessing state. You MUST create one state per channel processed. - * @param frame_size Number of samples to process at one time (should correspond to 10-20 ms). Must be - * the same value as that used for the echo canceller for residual echo cancellation to work. - * @param sampling_rate Sampling rate used for the input. - * @return Newly created preprocessor state -*/ -SpeexPreprocessState *speex_preprocess_state_init(int frame_size, int sampling_rate); - -/** Destroys a preprocessor state - * @param st Preprocessor state to destroy -*/ -void speex_preprocess_state_destroy(SpeexPreprocessState *st); - -/** Preprocess a frame - * @param st Preprocessor state - * @param x Audio sample vector (in and out). Must be same size as specified in speex_preprocess_state_init(). - * @return Bool value for voice activity (1 for speech, 0 for noise/silence), ONLY if VAD turned on. -*/ -int speex_preprocess_run(SpeexPreprocessState *st, spx_int16_t *x); - -/** Preprocess a frame (deprecated, use speex_preprocess_run() instead)*/ -int speex_preprocess(SpeexPreprocessState *st, spx_int16_t *x, spx_int32_t *echo); - -/** Update preprocessor state, but do not compute the output - * @param st Preprocessor state - * @param x Audio sample vector (in only). Must be same size as specified in speex_preprocess_state_init(). -*/ -void speex_preprocess_estimate_update(SpeexPreprocessState *st, spx_int16_t *x); - -/** Used like the ioctl function to control the preprocessor parameters - * @param st Preprocessor state - * @param request ioctl-type request (one of the SPEEX_PREPROCESS_* macros) - * @param ptr Data exchanged to-from function - * @return 0 if no error, -1 if request in unknown -*/ -int speex_preprocess_ctl(SpeexPreprocessState *st, int request, void *ptr); - - - -/** Set preprocessor denoiser state */ -#define SPEEX_PREPROCESS_SET_DENOISE 0 -/** Get preprocessor denoiser state */ -#define SPEEX_PREPROCESS_GET_DENOISE 1 - -/** Set preprocessor Automatic Gain Control state */ -#define SPEEX_PREPROCESS_SET_AGC 2 -/** Get preprocessor Automatic Gain Control state */ -#define SPEEX_PREPROCESS_GET_AGC 3 - -/** Set preprocessor Voice Activity Detection state */ -#define SPEEX_PREPROCESS_SET_VAD 4 -/** Get preprocessor Voice Activity Detection state */ -#define SPEEX_PREPROCESS_GET_VAD 5 - -/** Set preprocessor Automatic Gain Control level (float) */ -#define SPEEX_PREPROCESS_SET_AGC_LEVEL 6 -/** Get preprocessor Automatic Gain Control level (float) */ -#define SPEEX_PREPROCESS_GET_AGC_LEVEL 7 - -/** Set preprocessor dereverb state */ -#define SPEEX_PREPROCESS_SET_DEREVERB 8 -/** Get preprocessor dereverb state */ -#define SPEEX_PREPROCESS_GET_DEREVERB 9 - -/** Set preprocessor dereverb level */ -#define SPEEX_PREPROCESS_SET_DEREVERB_LEVEL 10 -/** Get preprocessor dereverb level */ -#define SPEEX_PREPROCESS_GET_DEREVERB_LEVEL 11 - -/** Set preprocessor dereverb decay */ -#define SPEEX_PREPROCESS_SET_DEREVERB_DECAY 12 -/** Get preprocessor dereverb decay */ -#define SPEEX_PREPROCESS_GET_DEREVERB_DECAY 13 - -/** Set probability required for the VAD to go from silence to voice */ -#define SPEEX_PREPROCESS_SET_PROB_START 14 -/** Get probability required for the VAD to go from silence to voice */ -#define SPEEX_PREPROCESS_GET_PROB_START 15 - -/** Set probability required for the VAD to stay in the voice state (integer percent) */ -#define SPEEX_PREPROCESS_SET_PROB_CONTINUE 16 -/** Get probability required for the VAD to stay in the voice state (integer percent) */ -#define SPEEX_PREPROCESS_GET_PROB_CONTINUE 17 - -/** Set maximum attenuation of the noise in dB (negative number) */ -#define SPEEX_PREPROCESS_SET_NOISE_SUPPRESS 18 -/** Get maximum attenuation of the noise in dB (negative number) */ -#define SPEEX_PREPROCESS_GET_NOISE_SUPPRESS 19 - -/** Set maximum attenuation of the residual echo in dB (negative number) */ -#define SPEEX_PREPROCESS_SET_ECHO_SUPPRESS 20 -/** Get maximum attenuation of the residual echo in dB (negative number) */ -#define SPEEX_PREPROCESS_GET_ECHO_SUPPRESS 21 - -/** Set maximum attenuation of the residual echo in dB when near end is active (negative number) */ -#define SPEEX_PREPROCESS_SET_ECHO_SUPPRESS_ACTIVE 22 -/** Get maximum attenuation of the residual echo in dB when near end is active (negative number) */ -#define SPEEX_PREPROCESS_GET_ECHO_SUPPRESS_ACTIVE 23 - -/** Set the corresponding echo canceller state so that residual echo suppression can be performed (NULL for no residual echo suppression) */ -#define SPEEX_PREPROCESS_SET_ECHO_STATE 24 -/** Get the corresponding echo canceller state */ -#define SPEEX_PREPROCESS_GET_ECHO_STATE 25 - -/** Set maximal gain increase in dB/second (int32) */ -#define SPEEX_PREPROCESS_SET_AGC_INCREMENT 26 - -/** Get maximal gain increase in dB/second (int32) */ -#define SPEEX_PREPROCESS_GET_AGC_INCREMENT 27 - -/** Set maximal gain decrease in dB/second (int32) */ -#define SPEEX_PREPROCESS_SET_AGC_DECREMENT 28 - -/** Get maximal gain decrease in dB/second (int32) */ -#define SPEEX_PREPROCESS_GET_AGC_DECREMENT 29 - -/** Set maximal gain in dB (int32) */ -#define SPEEX_PREPROCESS_SET_AGC_MAX_GAIN 30 - -/** Get maximal gain in dB (int32) */ -#define SPEEX_PREPROCESS_GET_AGC_MAX_GAIN 31 - -/* Can't set loudness */ -/** Get loudness */ -#define SPEEX_PREPROCESS_GET_AGC_LOUDNESS 33 - -/* Can't set gain */ -/** Get current gain (int32 percent) */ -#define SPEEX_PREPROCESS_GET_AGC_GAIN 35 - -/* Can't set spectrum size */ -/** Get spectrum size for power spectrum (int32) */ -#define SPEEX_PREPROCESS_GET_PSD_SIZE 37 - -/* Can't set power spectrum */ -/** Get power spectrum (int32[] of squared values) */ -#define SPEEX_PREPROCESS_GET_PSD 39 - -/* Can't set noise size */ -/** Get spectrum size for noise estimate (int32) */ -#define SPEEX_PREPROCESS_GET_NOISE_PSD_SIZE 41 - -/* Can't set noise estimate */ -/** Get noise estimate (int32[] of squared values) */ -#define SPEEX_PREPROCESS_GET_NOISE_PSD 43 - -/* Can't set speech probability */ -/** Get speech probability in last frame (int32). */ -#define SPEEX_PREPROCESS_GET_PROB 45 - -/** Set preprocessor Automatic Gain Control level (int32) */ -#define SPEEX_PREPROCESS_SET_AGC_TARGET 46 -/** Get preprocessor Automatic Gain Control level (int32) */ -#define SPEEX_PREPROCESS_GET_AGC_TARGET 47 - -#ifdef __cplusplus -} -#endif - -/** @}*/ -#endif diff -Nru speex-1.2~rc1.2/include/speex/speex_resampler.h speex-1.2.0/include/speex/speex_resampler.h --- speex-1.2~rc1.2/include/speex/speex_resampler.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex_resampler.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,340 +0,0 @@ -/* Copyright (C) 2007 Jean-Marc Valin - - File: speex_resampler.h - Resampling code - - The design goals of this code are: - - Very fast algorithm - - Low memory requirement - - Good *perceptual* quality (and not best SNR) - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - - -#ifndef SPEEX_RESAMPLER_H -#define SPEEX_RESAMPLER_H - -#ifdef OUTSIDE_SPEEX - -/********* WARNING: MENTAL SANITY ENDS HERE *************/ - -/* If the resampler is defined outside of Speex, we change the symbol names so that - there won't be any clash if linking with Speex later on. */ - -/* #define RANDOM_PREFIX your software name here */ -#ifndef RANDOM_PREFIX -#error "Please define RANDOM_PREFIX (above) to something specific to your project to prevent symbol name clashes" -#endif - -#define CAT_PREFIX2(a,b) a ## b -#define CAT_PREFIX(a,b) CAT_PREFIX2(a, b) - -#define speex_resampler_init CAT_PREFIX(RANDOM_PREFIX,_resampler_init) -#define speex_resampler_init_frac CAT_PREFIX(RANDOM_PREFIX,_resampler_init_frac) -#define speex_resampler_destroy CAT_PREFIX(RANDOM_PREFIX,_resampler_destroy) -#define speex_resampler_process_float CAT_PREFIX(RANDOM_PREFIX,_resampler_process_float) -#define speex_resampler_process_int CAT_PREFIX(RANDOM_PREFIX,_resampler_process_int) -#define speex_resampler_process_interleaved_float CAT_PREFIX(RANDOM_PREFIX,_resampler_process_interleaved_float) -#define speex_resampler_process_interleaved_int CAT_PREFIX(RANDOM_PREFIX,_resampler_process_interleaved_int) -#define speex_resampler_set_rate CAT_PREFIX(RANDOM_PREFIX,_resampler_set_rate) -#define speex_resampler_get_rate CAT_PREFIX(RANDOM_PREFIX,_resampler_get_rate) -#define speex_resampler_set_rate_frac CAT_PREFIX(RANDOM_PREFIX,_resampler_set_rate_frac) -#define speex_resampler_get_ratio CAT_PREFIX(RANDOM_PREFIX,_resampler_get_ratio) -#define speex_resampler_set_quality CAT_PREFIX(RANDOM_PREFIX,_resampler_set_quality) -#define speex_resampler_get_quality CAT_PREFIX(RANDOM_PREFIX,_resampler_get_quality) -#define speex_resampler_set_input_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_set_input_stride) -#define speex_resampler_get_input_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_get_input_stride) -#define speex_resampler_set_output_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_set_output_stride) -#define speex_resampler_get_output_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_get_output_stride) -#define speex_resampler_get_input_latency CAT_PREFIX(RANDOM_PREFIX,_resampler_get_input_latency) -#define speex_resampler_get_output_latency CAT_PREFIX(RANDOM_PREFIX,_resampler_get_output_latency) -#define speex_resampler_skip_zeros CAT_PREFIX(RANDOM_PREFIX,_resampler_skip_zeros) -#define speex_resampler_reset_mem CAT_PREFIX(RANDOM_PREFIX,_resampler_reset_mem) -#define speex_resampler_strerror CAT_PREFIX(RANDOM_PREFIX,_resampler_strerror) - -#define spx_int16_t short -#define spx_int32_t int -#define spx_uint16_t unsigned short -#define spx_uint32_t unsigned int - -#else /* OUTSIDE_SPEEX */ - -#include "speex/speex_types.h" - -#endif /* OUTSIDE_SPEEX */ - -#ifdef __cplusplus -extern "C" { -#endif - -#define SPEEX_RESAMPLER_QUALITY_MAX 10 -#define SPEEX_RESAMPLER_QUALITY_MIN 0 -#define SPEEX_RESAMPLER_QUALITY_DEFAULT 4 -#define SPEEX_RESAMPLER_QUALITY_VOIP 3 -#define SPEEX_RESAMPLER_QUALITY_DESKTOP 5 - -enum { - RESAMPLER_ERR_SUCCESS = 0, - RESAMPLER_ERR_ALLOC_FAILED = 1, - RESAMPLER_ERR_BAD_STATE = 2, - RESAMPLER_ERR_INVALID_ARG = 3, - RESAMPLER_ERR_PTR_OVERLAP = 4, - - RESAMPLER_ERR_MAX_ERROR -}; - -struct SpeexResamplerState_; -typedef struct SpeexResamplerState_ SpeexResamplerState; - -/** Create a new resampler with integer input and output rates. - * @param nb_channels Number of channels to be processed - * @param in_rate Input sampling rate (integer number of Hz). - * @param out_rate Output sampling rate (integer number of Hz). - * @param quality Resampling quality between 0 and 10, where 0 has poor quality - * and 10 has very high quality. - * @return Newly created resampler state - * @retval NULL Error: not enough memory - */ -SpeexResamplerState *speex_resampler_init(spx_uint32_t nb_channels, - spx_uint32_t in_rate, - spx_uint32_t out_rate, - int quality, - int *err); - -/** Create a new resampler with fractional input/output rates. The sampling - * rate ratio is an arbitrary rational number with both the numerator and - * denominator being 32-bit integers. - * @param nb_channels Number of channels to be processed - * @param ratio_num Numerator of the sampling rate ratio - * @param ratio_den Denominator of the sampling rate ratio - * @param in_rate Input sampling rate rounded to the nearest integer (in Hz). - * @param out_rate Output sampling rate rounded to the nearest integer (in Hz). - * @param quality Resampling quality between 0 and 10, where 0 has poor quality - * and 10 has very high quality. - * @return Newly created resampler state - * @retval NULL Error: not enough memory - */ -SpeexResamplerState *speex_resampler_init_frac(spx_uint32_t nb_channels, - spx_uint32_t ratio_num, - spx_uint32_t ratio_den, - spx_uint32_t in_rate, - spx_uint32_t out_rate, - int quality, - int *err); - -/** Destroy a resampler state. - * @param st Resampler state - */ -void speex_resampler_destroy(SpeexResamplerState *st); - -/** Resample a float array. The input and output buffers must *not* overlap. - * @param st Resampler state - * @param channel_index Index of the channel to process for the multi-channel - * base (0 otherwise) - * @param in Input buffer - * @param in_len Number of input samples in the input buffer. Returns the - * number of samples processed - * @param out Output buffer - * @param out_len Size of the output buffer. Returns the number of samples written - */ -int speex_resampler_process_float(SpeexResamplerState *st, - spx_uint32_t channel_index, - const float *in, - spx_uint32_t *in_len, - float *out, - spx_uint32_t *out_len); - -/** Resample an int array. The input and output buffers must *not* overlap. - * @param st Resampler state - * @param channel_index Index of the channel to process for the multi-channel - * base (0 otherwise) - * @param in Input buffer - * @param in_len Number of input samples in the input buffer. Returns the number - * of samples processed - * @param out Output buffer - * @param out_len Size of the output buffer. Returns the number of samples written - */ -int speex_resampler_process_int(SpeexResamplerState *st, - spx_uint32_t channel_index, - const spx_int16_t *in, - spx_uint32_t *in_len, - spx_int16_t *out, - spx_uint32_t *out_len); - -/** Resample an interleaved float array. The input and output buffers must *not* overlap. - * @param st Resampler state - * @param in Input buffer - * @param in_len Number of input samples in the input buffer. Returns the number - * of samples processed. This is all per-channel. - * @param out Output buffer - * @param out_len Size of the output buffer. Returns the number of samples written. - * This is all per-channel. - */ -int speex_resampler_process_interleaved_float(SpeexResamplerState *st, - const float *in, - spx_uint32_t *in_len, - float *out, - spx_uint32_t *out_len); - -/** Resample an interleaved int array. The input and output buffers must *not* overlap. - * @param st Resampler state - * @param in Input buffer - * @param in_len Number of input samples in the input buffer. Returns the number - * of samples processed. This is all per-channel. - * @param out Output buffer - * @param out_len Size of the output buffer. Returns the number of samples written. - * This is all per-channel. - */ -int speex_resampler_process_interleaved_int(SpeexResamplerState *st, - const spx_int16_t *in, - spx_uint32_t *in_len, - spx_int16_t *out, - spx_uint32_t *out_len); - -/** Set (change) the input/output sampling rates (integer value). - * @param st Resampler state - * @param in_rate Input sampling rate (integer number of Hz). - * @param out_rate Output sampling rate (integer number of Hz). - */ -int speex_resampler_set_rate(SpeexResamplerState *st, - spx_uint32_t in_rate, - spx_uint32_t out_rate); - -/** Get the current input/output sampling rates (integer value). - * @param st Resampler state - * @param in_rate Input sampling rate (integer number of Hz) copied. - * @param out_rate Output sampling rate (integer number of Hz) copied. - */ -void speex_resampler_get_rate(SpeexResamplerState *st, - spx_uint32_t *in_rate, - spx_uint32_t *out_rate); - -/** Set (change) the input/output sampling rates and resampling ratio - * (fractional values in Hz supported). - * @param st Resampler state - * @param ratio_num Numerator of the sampling rate ratio - * @param ratio_den Denominator of the sampling rate ratio - * @param in_rate Input sampling rate rounded to the nearest integer (in Hz). - * @param out_rate Output sampling rate rounded to the nearest integer (in Hz). - */ -int speex_resampler_set_rate_frac(SpeexResamplerState *st, - spx_uint32_t ratio_num, - spx_uint32_t ratio_den, - spx_uint32_t in_rate, - spx_uint32_t out_rate); - -/** Get the current resampling ratio. This will be reduced to the least - * common denominator. - * @param st Resampler state - * @param ratio_num Numerator of the sampling rate ratio copied - * @param ratio_den Denominator of the sampling rate ratio copied - */ -void speex_resampler_get_ratio(SpeexResamplerState *st, - spx_uint32_t *ratio_num, - spx_uint32_t *ratio_den); - -/** Set (change) the conversion quality. - * @param st Resampler state - * @param quality Resampling quality between 0 and 10, where 0 has poor - * quality and 10 has very high quality. - */ -int speex_resampler_set_quality(SpeexResamplerState *st, - int quality); - -/** Get the conversion quality. - * @param st Resampler state - * @param quality Resampling quality between 0 and 10, where 0 has poor - * quality and 10 has very high quality. - */ -void speex_resampler_get_quality(SpeexResamplerState *st, - int *quality); - -/** Set (change) the input stride. - * @param st Resampler state - * @param stride Input stride - */ -void speex_resampler_set_input_stride(SpeexResamplerState *st, - spx_uint32_t stride); - -/** Get the input stride. - * @param st Resampler state - * @param stride Input stride copied - */ -void speex_resampler_get_input_stride(SpeexResamplerState *st, - spx_uint32_t *stride); - -/** Set (change) the output stride. - * @param st Resampler state - * @param stride Output stride - */ -void speex_resampler_set_output_stride(SpeexResamplerState *st, - spx_uint32_t stride); - -/** Get the output stride. - * @param st Resampler state copied - * @param stride Output stride - */ -void speex_resampler_get_output_stride(SpeexResamplerState *st, - spx_uint32_t *stride); - -/** Get the latency in input samples introduced by the resampler. - * @param st Resampler state - */ -int speex_resampler_get_input_latency(SpeexResamplerState *st); - -/** Get the latency in output samples introduced by the resampler. - * @param st Resampler state - */ -int speex_resampler_get_output_latency(SpeexResamplerState *st); - -/** Make sure that the first samples to go out of the resamplers don't have - * leading zeros. This is only useful before starting to use a newly created - * resampler. It is recommended to use that when resampling an audio file, as - * it will generate a file with the same length. For real-time processing, - * it is probably easier not to use this call (so that the output duration - * is the same for the first frame). - * @param st Resampler state - */ -int speex_resampler_skip_zeros(SpeexResamplerState *st); - -/** Reset a resampler so a new (unrelated) stream can be processed. - * @param st Resampler state - */ -int speex_resampler_reset_mem(SpeexResamplerState *st); - -/** Returns the English meaning for an error code - * @param err Error code - * @return English string - */ -const char *speex_resampler_strerror(int err); - -#ifdef __cplusplus -} -#endif - -#endif diff -Nru speex-1.2~rc1.2/include/speex/speex_stereo.h speex-1.2.0/include/speex/speex_stereo.h --- speex-1.2~rc1.2/include/speex/speex_stereo.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex_stereo.h 2015-07-06 15:02:11.000000000 +0000 @@ -7,18 +7,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -39,8 +39,9 @@ * @{ */ -#include "speex/speex_types.h" -#include "speex/speex_bits.h" +#include "speex_types.h" +#include "speex_bits.h" + #ifdef __cplusplus extern "C" { diff -Nru speex-1.2~rc1.2/include/speex/speex_types.h speex-1.2.0/include/speex/speex_types.h --- speex-1.2~rc1.2/include/speex/speex_types.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/include/speex/speex_types.h 2015-07-06 15:02:11.000000000 +0000 @@ -22,7 +22,7 @@ #ifndef _SPEEX_TYPES_H #define _SPEEX_TYPES_H -#if defined(_WIN32) +#if defined(_WIN32) # if defined(__CYGWIN__) # include <_G_config.h> @@ -119,7 +119,7 @@ #else -# include +#include "speex_config_types.h" #endif diff -Nru speex-1.2~rc1.2/INSTALL speex-1.2.0/INSTALL --- speex-1.2~rc1.2/INSTALL 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/INSTALL 2015-07-06 15:01:56.000000000 +0000 @@ -4,5 +4,5 @@ % make % make install -Note that if you are using the code from SVN, you will need to run "autogen.sh" -instead of "configure". +Note that if you are using the code from Git, you will need to run "autogen.sh" +and then "configure". diff -Nru speex-1.2~rc1.2/install-sh speex-1.2.0/install-sh --- speex-1.2~rc1.2/install-sh 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/install-sh 2016-12-07 19:52:53.000000000 +0000 @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2011-11-20.07; # UTC +scriptversion=2014-09-12.12; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -41,19 +41,15 @@ # This script is compatible with the BSD install script, but was written # from scratch. +tab=' ' nl=' ' -IFS=" "" $nl" +IFS=" $tab$nl" -# set DOITPROG to echo to test this script +# Set DOITPROG to "echo" to test this script. -# Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi +doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. @@ -68,17 +64,6 @@ rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - posix_mkdir= # Desired mode of installed file. @@ -97,7 +82,7 @@ dst_arg= copy_on_change=false -no_target_directory= +is_target_a_directory=possibly usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE @@ -137,46 +122,57 @@ -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift;; + shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift;; + shift;; -s) stripcmd=$stripprog;; - -t) dst_arg=$2 - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; - -T) no_target_directory=true;; + -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; - --) shift - break;; + --) shift + break;; - -*) echo "$0: invalid option: $1" >&2 - exit 1;; + -*) echo "$0: invalid option: $1" >&2 + exit 1;; *) break;; esac shift done +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. + +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi + if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. @@ -208,6 +204,15 @@ fi if test -z "$dir_arg"; then + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi + +if test -z "$dir_arg"; then do_exit='(exit $ret); exit $ret' trap "ret=129; $do_exit" 1 trap "ret=130; $do_exit" 2 @@ -223,16 +228,16 @@ *[0-7]) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw='% 200' + u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw=,u+rw + u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac @@ -269,41 +274,15 @@ # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - + dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi @@ -314,74 +293,81 @@ if test $dstdir_status != 0; then case $posix_mkdir in '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + # $RANDOM is not portable (e.g. dash); use it when possible to + # lower collision chance + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 + + # As "mkdir -p" follows symlinks and we work in /tmp possibly; so + # create the $tmpdir first (and fail if unsuccessful) to make sure + # that nobody tries to guess the $tmpdir name. + if (umask $mkdir_umask && + $mkdirprog $mkdir_mode "$tmpdir" && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + test_tmpdir="$tmpdir/a" + ls_ld_tmpdir=`ls -ld "$test_tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null + fi + trap '' 0;; + esac;; esac if $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else @@ -391,53 +377,51 @@ # directory the slow way, step by step, checking for races as we go. case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; esac - eval "$initialize_posix_glob" - oIFS=$IFS IFS=/ - $posix_glob set -f + set -f set fnord $dstdir shift - $posix_glob set +f + set +f IFS=$oIFS prefixes= for d do - test X"$d" = X && continue + test X"$d" = X && continue - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ done if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi fi fi @@ -472,15 +456,12 @@ # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - + set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then @@ -493,24 +474,24 @@ # to itself, or perhaps because mv is so ancient that it does not # support -f. { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 diff -Nru speex-1.2~rc1.2/libspeex/arch.h speex-1.2.0/libspeex/arch.h --- speex-1.2~rc1.2/libspeex/arch.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/arch.h 2016-12-07 21:05:02.000000000 +0000 @@ -38,9 +38,9 @@ #ifndef SPEEX_VERSION #define SPEEX_MAJOR_VERSION 1 /**< Major Speex version. */ #define SPEEX_MINOR_VERSION 1 /**< Minor Speex version. */ -#define SPEEX_MICRO_VERSION 15 /**< Micro Speex version. */ +#define SPEEX_MICRO_VERSION 16 /**< Micro Speex version. */ #define SPEEX_EXTRA_VERSION "" /**< Extra Speex version. */ -#define SPEEX_VERSION "speex-1.2beta3" /**< Speex version string. */ +#define SPEEX_VERSION "speex-1.2.0" /**< Speex version string. */ #endif /* A couple test to catch stupid option combinations */ @@ -74,9 +74,7 @@ #endif -#ifndef OUTSIDE_SPEEX #include "speex/speex_types.h" -#endif #define ABS(x) ((x) < 0 ? (-(x)) : (x)) /**< Absolute integer value. */ #define ABS16(x) ((x) < 0 ? (-(x)) : (x)) /**< Absolute 16-bit value. */ @@ -89,7 +87,7 @@ #ifdef FIXED_POINT typedef spx_int16_t spx_word16_t; -typedef spx_int32_t spx_word32_t; +typedef spx_int32_t spx_word32_t; typedef spx_word32_t spx_mem_t; typedef spx_word16_t spx_coef_t; typedef spx_word16_t spx_lsp_t; diff -Nru speex-1.2~rc1.2/libspeex/bfin.h speex-1.2.0/libspeex/bfin.h --- speex-1.2~rc1.2/libspeex/bfin.h 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/libspeex/bfin.h 2015-07-06 15:01:58.000000000 +0000 @@ -0,0 +1,15 @@ +/* Common Blackfin assembly defines + * + * Copyright (C) 2005-2009 Analog Devices + */ + +#if __GNUC__ <= 3 +/* GCC-3.4 and older did not use hardware loops and thus did not have + * register constraints for declaring clobbers. + */ +# define BFIN_HWLOOP0_REGS +# define BFIN_HWLOOP1_REGS +#else +# define BFIN_HWLOOP0_REGS , "LB0", "LT0", "LC0" +# define BFIN_HWLOOP1_REGS , "LB1", "LT1", "LC1" +#endif diff -Nru speex-1.2~rc1.2/libspeex/bits.c speex-1.2.0/libspeex/bits.c --- speex-1.2~rc1.2/libspeex/bits.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/bits.c 2015-07-06 15:01:59.000000000 +0000 @@ -1,4 +1,4 @@ -/* Copyright (C) 2002 Jean-Marc Valin +/* Copyright (C) 2002 Jean-Marc Valin File: speex_bits.c Handles bit packing/unpacking @@ -6,18 +6,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -36,7 +36,7 @@ #include "config.h" #endif -#include +#include "speex/speex_bits.h" #include "arch.h" #include "os_support.h" @@ -79,7 +79,7 @@ bits->charPtr=0; bits->bitPtr=0; bits->overflow=0; - + } EXPORT void speex_bits_destroy(SpeexBits *bits) @@ -106,7 +106,7 @@ bits->overflow=0; } -EXPORT void speex_bits_read_from(SpeexBits *bits, char *chars, int len) +EXPORT void speex_bits_read_from(SpeexBits *bits, const char *chars, int len) { int i; int nchars = len / BYTES_PER_CHAR; @@ -153,7 +153,7 @@ bits->charPtr=0; } -EXPORT void speex_bits_read_whole_bytes(SpeexBits *bits, char *chars, int nbytes) +EXPORT void speex_bits_read_whole_bytes(SpeexBits *bits, const char *chars, int nbytes) { int i,pos; int nchars = nbytes/BYTES_PER_CHAR; diff -Nru speex-1.2~rc1.2/libspeex/buffer.c speex-1.2.0/libspeex/buffer.c --- speex-1.2~rc1.2/libspeex/buffer.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/buffer.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,176 +0,0 @@ -/* Copyright (C) 2007 Jean-Marc Valin - - File: buffer.c - This is a very simple ring buffer implementation. It is not thread-safe - so you need to do your own locking. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - - -#include "os_support.h" -#include "arch.h" -#include - -struct SpeexBuffer_ { - char *data; - int size; - int read_ptr; - int write_ptr; - int available; -}; - -EXPORT SpeexBuffer *speex_buffer_init(int size) -{ - SpeexBuffer *st = speex_alloc(sizeof(SpeexBuffer)); - st->data = speex_alloc(size); - st->size = size; - st->read_ptr = 0; - st->write_ptr = 0; - st->available = 0; - return st; -} - -EXPORT void speex_buffer_destroy(SpeexBuffer *st) -{ - speex_free(st->data); - speex_free(st); -} - -EXPORT int speex_buffer_write(SpeexBuffer *st, void *_data, int len) -{ - int end; - int end1; - char *data = _data; - if (len > st->size) - { - data += len-st->size; - len = st->size; - } - end = st->write_ptr + len; - end1 = end; - if (end1 > st->size) - end1 = st->size; - SPEEX_COPY(st->data + st->write_ptr, data, end1 - st->write_ptr); - if (end > st->size) - { - end -= st->size; - SPEEX_COPY(st->data, data+end1 - st->write_ptr, end); - } - st->available += len; - if (st->available > st->size) - { - st->available = st->size; - st->read_ptr = st->write_ptr; - } - st->write_ptr += len; - if (st->write_ptr > st->size) - st->write_ptr -= st->size; - return len; -} - -EXPORT int speex_buffer_writezeros(SpeexBuffer *st, int len) -{ - /* This is almost the same as for speex_buffer_write() but using - SPEEX_MEMSET() instead of SPEEX_COPY(). Update accordingly. */ - int end; - int end1; - if (len > st->size) - { - len = st->size; - } - end = st->write_ptr + len; - end1 = end; - if (end1 > st->size) - end1 = st->size; - SPEEX_MEMSET(st->data + st->write_ptr, 0, end1 - st->write_ptr); - if (end > st->size) - { - end -= st->size; - SPEEX_MEMSET(st->data, 0, end); - } - st->available += len; - if (st->available > st->size) - { - st->available = st->size; - st->read_ptr = st->write_ptr; - } - st->write_ptr += len; - if (st->write_ptr > st->size) - st->write_ptr -= st->size; - return len; -} - -EXPORT int speex_buffer_read(SpeexBuffer *st, void *_data, int len) -{ - int end, end1; - char *data = _data; - if (len > st->available) - { - SPEEX_MEMSET(data+st->available, 0, st->size-st->available); - len = st->available; - } - end = st->read_ptr + len; - end1 = end; - if (end1 > st->size) - end1 = st->size; - SPEEX_COPY(data, st->data + st->read_ptr, end1 - st->read_ptr); - - if (end > st->size) - { - end -= st->size; - SPEEX_COPY(data+end1 - st->read_ptr, st->data, end); - } - st->available -= len; - st->read_ptr += len; - if (st->read_ptr > st->size) - st->read_ptr -= st->size; - return len; -} - -EXPORT int speex_buffer_get_available(SpeexBuffer *st) -{ - return st->available; -} - -EXPORT int speex_buffer_resize(SpeexBuffer *st, int len) -{ - int old_len = st->size; - if (len > old_len) - { - st->data = speex_realloc(st->data, len); - /* FIXME: move data/pointers properly for growing the buffer */ - } else { - /* FIXME: move data/pointers properly for shrinking the buffer */ - st->data = speex_realloc(st->data, len); - } - return len; -} diff -Nru speex-1.2~rc1.2/libspeex/cb_search_bfin.h speex-1.2.0/libspeex/cb_search_bfin.h --- speex-1.2~rc1.2/libspeex/cb_search_bfin.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/cb_search_bfin.h 2015-07-06 15:01:58.000000000 +0000 @@ -33,6 +33,8 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include "bfin.h" + #define OVERRIDE_COMPUTE_WEIGHTED_CODEBOOK void compute_weighted_codebook(const signed char *shape_cb, const spx_word16_t *r, spx_word16_t *resp, spx_word16_t *resp2, spx_word32_t *E, int shape_cb_size, int subvect_size, char *stack) { @@ -73,10 +75,7 @@ : : "m" (subvect_size), "m" (shape_cb), "m" (r), "m" (resp), "m" (E) : "A0", "P0", "P1", "P2", "P3", "P4", "R0", "R1", "R2", "I0", "I1", "L0", - "L1", "A0", "A1", "memory" -#if !(__GNUC__ == 3) - , "LC0", "LC1" /* gcc 3.4 doesn't know about LC registers */ -#endif + "L1", "A0", "A1", "memory", "ASTAT" BFIN_HWLOOP0_REGS BFIN_HWLOOP1_REGS ); shape_cb += subvect_size; resp += subvect_size; @@ -107,6 +106,6 @@ "LOOP_END tupdate%=;\n\t" : : "a" (t), "a" (r), "d" (g), "a" (len) - : "R0", "R1", "R2", "A1", "I0", "I1", "L0", "L1" + : "R0", "R1", "R2", "A1", "I0", "I1", "L0", "L1", "ASTAT" BFIN_HWLOOP0_REGS ); } diff -Nru speex-1.2~rc1.2/libspeex/cb_search.c speex-1.2.0/libspeex/cb_search.c --- speex-1.2~rc1.2/libspeex/cb_search.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/cb_search.c 2015-07-23 18:05:56.000000000 +0000 @@ -1,21 +1,21 @@ -/* Copyright (C) 2002-2006 Jean-Marc Valin +/* Copyright (C) 2002-2006 Jean-Marc Valin File: cb_search.c Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -49,6 +49,8 @@ #include "cb_search_bfin.h" #endif +#ifndef DISABLE_ENCODER + #ifndef OVERRIDE_COMPUTE_WEIGHTED_CODEBOOK static void compute_weighted_codebook(const signed char *shape_cb, const spx_word16_t *r, spx_word16_t *resp, spx_word16_t *resp2, spx_word32_t *E, int shape_cb_size, int subvect_size, char *stack) { @@ -58,7 +60,7 @@ for (i=0;isubvect_size; nb_subvect = params->nb_subvect; @@ -146,7 +148,7 @@ #endif ALLOC(t, nsf, spx_word16_t); ALLOC(e, nsf, spx_sig_t); - + /* FIXME: Do we still need to copy the target? */ SPEEX_COPY(t, target, nsf); @@ -156,13 +158,15 @@ { spx_word16_t *x=t+subvect_size*i; /*Find new n-best based on previous n-best j*/ +#ifndef DISABLE_WIDEBAND if (have_sign) vq_nbest_sign(x, resp2, subvect_size, shape_cb_size, E, 1, &best_index, &best_dist, stack); else +#endif /* DISABLE_WIDEBAND */ vq_nbest(x, resp2, subvect_size, shape_cb_size, E, 1, &best_index, &best_dist, stack); - + speex_bits_pack(bits,best_index,params->shape_bits+have_sign); - + { int rind; spx_word16_t *res; @@ -194,9 +198,9 @@ for (j=0;jshape_bits+have_sign); } - + /* Put everything back together */ for (i=0;isubvect_size; nb_subvect = params->nb_subvect; - shape_cb_size = 1<shape_bits; + shape_cb = params->shape_cb; have_sign = params->have_sign; @@ -564,11 +571,13 @@ } #else for (j=0;j +#include "speex/speex_bits.h" #include "arch.h" /** Split codebook parameters. */ diff -Nru speex-1.2~rc1.2/libspeex/echo_diagnostic.m speex-1.2.0/libspeex/echo_diagnostic.m --- speex-1.2~rc1.2/libspeex/echo_diagnostic.m 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/echo_diagnostic.m 1970-01-01 00:00:00.000000000 +0000 @@ -1,72 +0,0 @@ -% Attempts to diagnose AEC problems from recorded samples -% -% out = echo_diagnostic(rec_file, play_file, out_file, tail_length) -% -% Computes the full matrix inversion to cancel echo from the -% recording 'rec_file' using the far end signal 'play_file' using -% a filter length of 'tail_length'. The output is saved to 'out_file'. -function out = echo_diagnostic(rec_file, play_file, out_file, tail_length) - -F=fopen(rec_file,'rb'); -rec=fread(F,Inf,'short'); -fclose (F); -F=fopen(play_file,'rb'); -play=fread(F,Inf,'short'); -fclose (F); - -rec = [rec; zeros(1024,1)]; -play = [play; zeros(1024,1)]; - -N = length(rec); -corr = real(ifft(fft(rec).*conj(fft(play)))); -acorr = real(ifft(fft(play).*conj(fft(play)))); - -[a,b] = max(corr); - -if b > N/2 - b = b-N; -end -printf ("Far end to near end delay is %d samples\n", b); -if (b > .3*tail_length) - printf ('This is too much delay, try delaying the far-end signal a bit\n'); -else if (b < 0) - printf ('You have a negative delay, the echo canceller has no chance to cancel anything!\n'); - else - printf ('Delay looks OK.\n'); - end - end -end -N2 = round(N/2); -corr1 = real(ifft(fft(rec(1:N2)).*conj(fft(play(1:N2))))); -corr2 = real(ifft(fft(rec(N2+1:end)).*conj(fft(play(N2+1:end))))); - -[a,b1] = max(corr1); -if b1 > N2/2 - b1 = b1-N2; -end -[a,b2] = max(corr2); -if b2 > N2/2 - b2 = b2-N2; -end -drift = (b1-b2)/N2; -printf ('Drift estimate is %f%% (%d samples)\n', 100*drift, b1-b2); -if abs(b1-b2) < 10 - printf ('A drift of a few (+-10) samples is normal.\n'); -else - if abs(b1-b2) < 30 - printf ('There may be (not sure) excessive clock drift. Is the capture and playback done on the same soundcard?\n'); - else - printf ('Your clock is drifting! No way the AEC will be able to do anything with that. Most likely, you''re doing capture and playback from two different cards.\n'); - end - end -end -acorr(1) = .001+1.00001*acorr(1); -AtA = toeplitz(acorr(1:tail_length)); -bb = corr(1:tail_length); -h = AtA\bb; - -out = (rec - filter(h, 1, play)); - -F=fopen(out_file,'w'); -fwrite(F,out,'short'); -fclose (F); diff -Nru speex-1.2~rc1.2/libspeex/exc_10_16_table.c speex-1.2.0/libspeex/exc_10_16_table.c --- speex-1.2~rc1.2/libspeex/exc_10_16_table.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/exc_10_16_table.c 2015-07-06 15:02:00.000000000 +0000 @@ -1,22 +1,22 @@ -/* Copyright (C) 2002 Jean-Marc Valin +/* Copyright (C) 2002 Jean-Marc Valin File: exc_10_16_table.c Codebook for excitation in narrowband CELP mode (3200 bps) Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR diff -Nru speex-1.2~rc1.2/libspeex/exc_10_32_table.c speex-1.2.0/libspeex/exc_10_32_table.c --- speex-1.2~rc1.2/libspeex/exc_10_32_table.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/exc_10_32_table.c 2015-07-06 15:01:59.000000000 +0000 @@ -1,22 +1,22 @@ -/* Copyright (C) 2002 Jean-Marc Valin +/* Copyright (C) 2002 Jean-Marc Valin File: exc_10_32_table.c Codebook for excitation in narrowband CELP mode (4000 bps) Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR diff -Nru speex-1.2~rc1.2/libspeex/exc_20_32_table.c speex-1.2.0/libspeex/exc_20_32_table.c --- speex-1.2~rc1.2/libspeex/exc_20_32_table.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/exc_20_32_table.c 2015-07-06 15:01:58.000000000 +0000 @@ -1,22 +1,22 @@ -/* Copyright (C) 2002 Jean-Marc Valin +/* Copyright (C) 2002 Jean-Marc Valin File: exc_20_32_table.c Codebook for excitation in narrowband CELP mode (2000 bps) Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR diff -Nru speex-1.2~rc1.2/libspeex/exc_5_256_table.c speex-1.2.0/libspeex/exc_5_256_table.c --- speex-1.2~rc1.2/libspeex/exc_5_256_table.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/exc_5_256_table.c 2015-07-06 15:01:58.000000000 +0000 @@ -1,22 +1,22 @@ -/* Copyright (C) 2002 Jean-Marc Valin +/* Copyright (C) 2002 Jean-Marc Valin File: exc_5_256_table.c Codebook for excitation in narrowband CELP mode (12800 bps) Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR diff -Nru speex-1.2~rc1.2/libspeex/exc_5_64_table.c speex-1.2.0/libspeex/exc_5_64_table.c --- speex-1.2~rc1.2/libspeex/exc_5_64_table.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/exc_5_64_table.c 2015-07-06 15:02:00.000000000 +0000 @@ -1,22 +1,22 @@ -/* Copyright (C) 2002 Jean-Marc Valin +/* Copyright (C) 2002 Jean-Marc Valin File: exc_5_64_table.c Codebook for excitation in narrowband CELP mode (9600 bps) Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR diff -Nru speex-1.2~rc1.2/libspeex/exc_8_128_table.c speex-1.2.0/libspeex/exc_8_128_table.c --- speex-1.2~rc1.2/libspeex/exc_8_128_table.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/exc_8_128_table.c 2015-07-06 15:01:58.000000000 +0000 @@ -1,22 +1,22 @@ -/* Copyright (C) 2002 Jean-Marc Valin +/* Copyright (C) 2002 Jean-Marc Valin File: exc_8_128_table.c Codebook for excitation in narrowband CELP mode (7000 bps) Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR diff -Nru speex-1.2~rc1.2/libspeex/fftwrap.c speex-1.2.0/libspeex/fftwrap.c --- speex-1.2~rc1.2/libspeex/fftwrap.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/fftwrap.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,397 +0,0 @@ -/* Copyright (C) 2005-2006 Jean-Marc Valin - File: fftwrap.c - - Wrapper for various FFTs - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - - Neither the name of the Xiph.org Foundation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR - CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*/ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "arch.h" -#include "os_support.h" - -#define MAX_FFT_SIZE 2048 - -#ifdef FIXED_POINT -static int maximize_range(spx_word16_t *in, spx_word16_t *out, spx_word16_t bound, int len) -{ - int i, shift; - spx_word16_t max_val = 0; - for (i=0;imax_val) - max_val = in[i]; - if (-in[i]>max_val) - max_val = -in[i]; - } - shift=0; - while (max_val <= (bound>>1) && max_val != 0) - { - max_val <<= 1; - shift++; - } - for (i=0;i - -void *spx_fft_init(int size) -{ - struct drft_lookup *table; - table = speex_alloc(sizeof(struct drft_lookup)); - spx_drft_init((struct drft_lookup *)table, size); - return (void*)table; -} - -void spx_fft_destroy(void *table) -{ - spx_drft_clear(table); - speex_free(table); -} - -void spx_fft(void *table, float *in, float *out) -{ - if (in==out) - { - int i; - float scale = 1./((struct drft_lookup *)table)->n; - speex_warning("FFT should not be done in-place"); - for (i=0;i<((struct drft_lookup *)table)->n;i++) - out[i] = scale*in[i]; - } else { - int i; - float scale = 1./((struct drft_lookup *)table)->n; - for (i=0;i<((struct drft_lookup *)table)->n;i++) - out[i] = scale*in[i]; - } - spx_drft_forward((struct drft_lookup *)table, out); -} - -void spx_ifft(void *table, float *in, float *out) -{ - if (in==out) - { - speex_warning("FFT should not be done in-place"); - } else { - int i; - for (i=0;i<((struct drft_lookup *)table)->n;i++) - out[i] = in[i]; - } - spx_drft_backward((struct drft_lookup *)table, out); -} - -#elif defined(USE_INTEL_MKL) -#include - -struct mkl_config { - DFTI_DESCRIPTOR_HANDLE desc; - int N; -}; - -void *spx_fft_init(int size) -{ - struct mkl_config *table = (struct mkl_config *) speex_alloc(sizeof(struct mkl_config)); - table->N = size; - DftiCreateDescriptor(&table->desc, DFTI_SINGLE, DFTI_REAL, 1, size); - DftiSetValue(table->desc, DFTI_PACKED_FORMAT, DFTI_PACK_FORMAT); - DftiSetValue(table->desc, DFTI_PLACEMENT, DFTI_NOT_INPLACE); - DftiSetValue(table->desc, DFTI_FORWARD_SCALE, 1.0f / size); - DftiCommitDescriptor(table->desc); - return table; -} - -void spx_fft_destroy(void *table) -{ - struct mkl_config *t = (struct mkl_config *) table; - DftiFreeDescriptor(t->desc); - speex_free(table); -} - -void spx_fft(void *table, spx_word16_t *in, spx_word16_t *out) -{ - struct mkl_config *t = (struct mkl_config *) table; - DftiComputeForward(t->desc, in, out); -} - -void spx_ifft(void *table, spx_word16_t *in, spx_word16_t *out) -{ - struct mkl_config *t = (struct mkl_config *) table; - DftiComputeBackward(t->desc, in, out); -} - -#elif defined(USE_GPL_FFTW3) - -#include - -struct fftw_config { - float *in; - float *out; - fftwf_plan fft; - fftwf_plan ifft; - int N; -}; - -void *spx_fft_init(int size) -{ - struct fftw_config *table = (struct fftw_config *) speex_alloc(sizeof(struct fftw_config)); - table->in = fftwf_malloc(sizeof(float) * (size+2)); - table->out = fftwf_malloc(sizeof(float) * (size+2)); - - table->fft = fftwf_plan_dft_r2c_1d(size, table->in, (fftwf_complex *) table->out, FFTW_PATIENT); - table->ifft = fftwf_plan_dft_c2r_1d(size, (fftwf_complex *) table->in, table->out, FFTW_PATIENT); - - table->N = size; - return table; -} - -void spx_fft_destroy(void *table) -{ - struct fftw_config *t = (struct fftw_config *) table; - fftwf_destroy_plan(t->fft); - fftwf_destroy_plan(t->ifft); - fftwf_free(t->in); - fftwf_free(t->out); - speex_free(table); -} - - -void spx_fft(void *table, spx_word16_t *in, spx_word16_t *out) -{ - int i; - struct fftw_config *t = (struct fftw_config *) table; - const int N = t->N; - float *iptr = t->in; - float *optr = t->out; - const float m = 1.0 / N; - for(i=0;ifft); - - out[0] = optr[0]; - for(i=1;iN; - float *iptr = t->in; - float *optr = t->out; - - iptr[0] = in[0]; - iptr[1] = 0.0f; - for(i=1;iifft); - - for(i=0;iforward = kiss_fftr_alloc(size,0,NULL,NULL); - table->backward = kiss_fftr_alloc(size,1,NULL,NULL); - table->N = size; - return table; -} - -void spx_fft_destroy(void *table) -{ - struct kiss_config *t = (struct kiss_config *)table; - kiss_fftr_free(t->forward); - kiss_fftr_free(t->backward); - speex_free(table); -} - -#ifdef FIXED_POINT - -void spx_fft(void *table, spx_word16_t *in, spx_word16_t *out) -{ - int shift; - struct kiss_config *t = (struct kiss_config *)table; - shift = maximize_range(in, in, 32000, t->N); - kiss_fftr2(t->forward, in, out); - renorm_range(in, in, shift, t->N); - renorm_range(out, out, shift, t->N); -} - -#else - -void spx_fft(void *table, spx_word16_t *in, spx_word16_t *out) -{ - int i; - float scale; - struct kiss_config *t = (struct kiss_config *)table; - scale = 1./t->N; - kiss_fftr2(t->forward, in, out); - for (i=0;iN;i++) - out[i] *= scale; -} -#endif - -void spx_ifft(void *table, spx_word16_t *in, spx_word16_t *out) -{ - struct kiss_config *t = (struct kiss_config *)table; - kiss_fftri2(t->backward, in, out); -} - - -#else - -#error No other FFT implemented - -#endif - - -#ifdef FIXED_POINT -/*#include "smallft.h"*/ - - -void spx_fft_float(void *table, float *in, float *out) -{ - int i; -#ifdef USE_SMALLFT - int N = ((struct drft_lookup *)table)->n; -#elif defined(USE_KISS_FFT) - int N = ((struct kiss_config *)table)->N; -#else -#endif -#ifdef VAR_ARRAYS - spx_word16_t _in[N]; - spx_word16_t _out[N]; -#else - spx_word16_t _in[MAX_FFT_SIZE]; - spx_word16_t _out[MAX_FFT_SIZE]; -#endif - for (i=0;iN); - scale = 1./((struct kiss_config *)table)->N; - for (i=0;i<((struct kiss_config *)table)->N;i++) - out[i] = scale*in[i]; - spx_drft_forward(&t, out); - spx_drft_clear(&t); - } -#endif -} - -void spx_ifft_float(void *table, float *in, float *out) -{ - int i; -#ifdef USE_SMALLFT - int N = ((struct drft_lookup *)table)->n; -#elif defined(USE_KISS_FFT) - int N = ((struct kiss_config *)table)->N; -#else -#endif -#ifdef VAR_ARRAYS - spx_word16_t _in[N]; - spx_word16_t _out[N]; -#else - spx_word16_t _in[MAX_FFT_SIZE]; - spx_word16_t _out[MAX_FFT_SIZE]; -#endif - for (i=0;iN); - for (i=0;i<((struct kiss_config *)table)->N;i++) - out[i] = in[i]; - spx_drft_backward(&t, out); - spx_drft_clear(&t); - } -#endif -} - -#else - -void spx_fft_float(void *table, float *in, float *out) -{ - spx_fft(table, in, out); -} -void spx_ifft_float(void *table, float *in, float *out) -{ - spx_ifft(table, in, out); -} - -#endif diff -Nru speex-1.2~rc1.2/libspeex/filterbank.c speex-1.2.0/libspeex/filterbank.c --- speex-1.2~rc1.2/libspeex/filterbank.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/filterbank.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,227 +0,0 @@ -/* Copyright (C) 2006 Jean-Marc Valin */ -/** - @file filterbank.c - @brief Converting between psd and filterbank - */ -/* - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "filterbank.h" -#include "arch.h" -#include -#include "math_approx.h" -#include "os_support.h" - -#ifdef FIXED_POINT - -#define toBARK(n) (MULT16_16(26829,spx_atan(SHR32(MULT16_16(97,n),2))) + MULT16_16(4588,spx_atan(MULT16_32_Q15(20,MULT16_16(n,n)))) + MULT16_16(3355,n)) - -#else -#define toBARK(n) (13.1f*atan(.00074f*(n))+2.24f*atan((n)*(n)*1.85e-8f)+1e-4f*(n)) -#endif - -#define toMEL(n) (2595.f*log10(1.f+(n)/700.f)) - -FilterBank *filterbank_new(int banks, spx_word32_t sampling, int len, int type) -{ - FilterBank *bank; - spx_word32_t df; - spx_word32_t max_mel, mel_interval; - int i; - int id1; - int id2; - df = DIV32(SHL32(sampling,15),MULT16_16(2,len)); - max_mel = toBARK(EXTRACT16(sampling/2)); - mel_interval = PDIV32(max_mel,banks-1); - - bank = (FilterBank*)speex_alloc(sizeof(FilterBank)); - bank->nb_banks = banks; - bank->len = len; - bank->bank_left = (int*)speex_alloc(len*sizeof(int)); - bank->bank_right = (int*)speex_alloc(len*sizeof(int)); - bank->filter_left = (spx_word16_t*)speex_alloc(len*sizeof(spx_word16_t)); - bank->filter_right = (spx_word16_t*)speex_alloc(len*sizeof(spx_word16_t)); - /* Think I can safely disable normalisation that for fixed-point (and probably float as well) */ -#ifndef FIXED_POINT - bank->scaling = (float*)speex_alloc(banks*sizeof(float)); -#endif - for (i=0;i max_mel) - break; -#ifdef FIXED_POINT - id1 = DIV32(mel,mel_interval); -#else - id1 = (int)(floor(mel/mel_interval)); -#endif - if (id1>banks-2) - { - id1 = banks-2; - val = Q15_ONE; - } else { - val = DIV32_16(mel - id1*mel_interval,EXTRACT16(PSHR32(mel_interval,15))); - } - id2 = id1+1; - bank->bank_left[i] = id1; - bank->filter_left[i] = SUB16(Q15_ONE,val); - bank->bank_right[i] = id2; - bank->filter_right[i] = val; - } - - /* Think I can safely disable normalisation for fixed-point (and probably float as well) */ -#ifndef FIXED_POINT - for (i=0;inb_banks;i++) - bank->scaling[i] = 0; - for (i=0;ilen;i++) - { - int id = bank->bank_left[i]; - bank->scaling[id] += bank->filter_left[i]; - id = bank->bank_right[i]; - bank->scaling[id] += bank->filter_right[i]; - } - for (i=0;inb_banks;i++) - bank->scaling[i] = Q15_ONE/(bank->scaling[i]); -#endif - return bank; -} - -void filterbank_destroy(FilterBank *bank) -{ - speex_free(bank->bank_left); - speex_free(bank->bank_right); - speex_free(bank->filter_left); - speex_free(bank->filter_right); -#ifndef FIXED_POINT - speex_free(bank->scaling); -#endif - speex_free(bank); -} - -void filterbank_compute_bank32(FilterBank *bank, spx_word32_t *ps, spx_word32_t *mel) -{ - int i; - for (i=0;inb_banks;i++) - mel[i] = 0; - - for (i=0;ilen;i++) - { - int id; - id = bank->bank_left[i]; - mel[id] += MULT16_32_P15(bank->filter_left[i],ps[i]); - id = bank->bank_right[i]; - mel[id] += MULT16_32_P15(bank->filter_right[i],ps[i]); - } - /* Think I can safely disable normalisation that for fixed-point (and probably float as well) */ -#ifndef FIXED_POINT - /*for (i=0;inb_banks;i++) - mel[i] = MULT16_32_P15(Q15(bank->scaling[i]),mel[i]); - */ -#endif -} - -void filterbank_compute_psd16(FilterBank *bank, spx_word16_t *mel, spx_word16_t *ps) -{ - int i; - for (i=0;ilen;i++) - { - spx_word32_t tmp; - int id1, id2; - id1 = bank->bank_left[i]; - id2 = bank->bank_right[i]; - tmp = MULT16_16(mel[id1],bank->filter_left[i]); - tmp += MULT16_16(mel[id2],bank->filter_right[i]); - ps[i] = EXTRACT16(PSHR32(tmp,15)); - } -} - - -#ifndef FIXED_POINT -void filterbank_compute_bank(FilterBank *bank, float *ps, float *mel) -{ - int i; - for (i=0;inb_banks;i++) - mel[i] = 0; - - for (i=0;ilen;i++) - { - int id = bank->bank_left[i]; - mel[id] += bank->filter_left[i]*ps[i]; - id = bank->bank_right[i]; - mel[id] += bank->filter_right[i]*ps[i]; - } - for (i=0;inb_banks;i++) - mel[i] *= bank->scaling[i]; -} - -void filterbank_compute_psd(FilterBank *bank, float *mel, float *ps) -{ - int i; - for (i=0;ilen;i++) - { - int id = bank->bank_left[i]; - ps[i] = mel[id]*bank->filter_left[i]; - id = bank->bank_right[i]; - ps[i] += mel[id]*bank->filter_right[i]; - } -} - -void filterbank_psy_smooth(FilterBank *bank, float *ps, float *mask) -{ - /* Low freq slope: 14 dB/Bark*/ - /* High freq slope: 9 dB/Bark*/ - /* Noise vs tone: 5 dB difference */ - /* FIXME: Temporary kludge */ - float bark[100]; - int i; - /* Assumes 1/3 Bark resolution */ - float decay_low = 0.34145f; - float decay_high = 0.50119f; - filterbank_compute_bank(bank, ps, bark); - for (i=1;inb_banks;i++) - { - /*float decay_high = 13-1.6*log10(bark[i-1]); - decay_high = pow(10,(-decay_high/30.f));*/ - bark[i] = bark[i] + decay_high*bark[i-1]; - } - for (i=bank->nb_banks-2;i>=0;i--) - { - bark[i] = bark[i] + decay_low*bark[i+1]; - } - filterbank_compute_psd(bank, bark, mask); -} - -#endif diff -Nru speex-1.2~rc1.2/libspeex/filterbank.h speex-1.2.0/libspeex/filterbank.h --- speex-1.2~rc1.2/libspeex/filterbank.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/filterbank.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,66 +0,0 @@ -/* Copyright (C) 2006 Jean-Marc Valin */ -/** - @file filterbank.h - @brief Converting between psd and filterbank - */ -/* - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef FILTERBANK_H -#define FILTERBANK_H - -#include "arch.h" - -typedef struct { - int *bank_left; - int *bank_right; - spx_word16_t *filter_left; - spx_word16_t *filter_right; -#ifndef FIXED_POINT - float *scaling; -#endif - int nb_banks; - int len; -} FilterBank; - - -FilterBank *filterbank_new(int banks, spx_word32_t sampling, int len, int type); - -void filterbank_destroy(FilterBank *bank); - -void filterbank_compute_bank32(FilterBank *bank, spx_word32_t *ps, spx_word32_t *mel); - -void filterbank_compute_psd16(FilterBank *bank, spx_word16_t *mel, spx_word16_t *psd); - -#ifndef FIXED_POINT -void filterbank_compute_bank(FilterBank *bank, float *psd, float *mel); -void filterbank_compute_psd(FilterBank *bank, float *mel, float *psd); -#endif - - -#endif diff -Nru speex-1.2~rc1.2/libspeex/filters_arm4.h speex-1.2.0/libspeex/filters_arm4.h --- speex-1.2~rc1.2/libspeex/filters_arm4.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/filters_arm4.h 2015-07-06 15:01:57.000000000 +0000 @@ -46,9 +46,9 @@ ".normalize16loop1%=: \n" "\tldr %4, [%0], #4 \n" - "\tcmps %4, %1 \n" + "\tcmp %4, %1 \n" "\tmovgt %1, %4 \n" - "\tcmps %4, %3 \n" + "\tcmp %4, %3 \n" "\tmovlt %3, %4 \n" "\tsubs %2, %2, #1 \n" diff -Nru speex-1.2~rc1.2/libspeex/filters_bfin.h speex-1.2.0/libspeex/filters_bfin.h --- speex-1.2~rc1.2/libspeex/filters_bfin.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/filters_bfin.h 2015-07-06 15:01:59.000000000 +0000 @@ -32,6 +32,8 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include "bfin.h" + #define OVERRIDE_NORMALIZE16 int normalize16(const spx_sig_t *x, spx_word16_t *y, spx_sig_t max_scale, int len) { @@ -50,7 +52,7 @@ "LOOP_END norm_max%=;\n\t" : "=&d" (max_val) : "a" (x), "a" (len) - : "R1", "R2" + : "R1", "R2", "ASTAT" BFIN_HWLOOP0_REGS ); sig_shift=0; @@ -74,7 +76,7 @@ "R1 = ASHIFT R0 by %2.L;\n\t" "W[P1++] = R1;\n\t" : : "a" (x), "a" (y), "d" (-sig_shift), "a" (len-1) - : "I0", "L0", "P1", "R0", "R1", "memory" + : "I0", "L0", "P1", "R0", "R1", "memory", "ASTAT" BFIN_HWLOOP0_REGS ); return sig_shift; } @@ -219,7 +221,8 @@ "LOOP_END mem_update%=;\n\t" "L0 = 0;\n\t" : : "m" (xy), "m" (_x), "m" (_y), "m" (numden), "m" (N), "m" (ord), "m" (mem) - : "A0", "A1", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1", "P2", "P3", "P4", "B0", "I0", "I2", "L0", "L2", "M0", "memory" + : "A0", "A1", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1", "P2", "P3", "P4", "B0", "I0", "I2", "L0", "L2", "M0", "memory", + "ASTAT" BFIN_HWLOOP0_REGS BFIN_HWLOOP1_REGS ); } @@ -345,7 +348,8 @@ "LOOP_END mem_update%=;\n\t" "L1 = 0;\n\t" : : "m" (yy), "m" (_x), "m" (_y), "m" (den), "m" (N), "m" (ord), "m" (mem) - : "A0", "A1", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1", "P2", "P3", "P4", "B1", "I1", "I3", "L1", "L3", "memory" + : "A0", "A1", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1", "P2", "P3", "P4", "B1", "I1", "I3", "L1", "L3", "memory", + "ASTAT" BFIN_HWLOOP0_REGS BFIN_HWLOOP1_REGS ); } @@ -426,7 +430,8 @@ "LOOP_END samples%=;\n\t" : "=a" (ytmp2), "=a" (y) : "a" (awk2), "a" (ak), "d" (ord), "m" (N), "0" (ytmp2), "1" (y) - : "A0", "A1", "R0", "R1", "R2", "R3", "I0", "I1", "I2", "I3", "L0", "L1", "L2", "L3", "A0", "A1" + : "A0", "A1", "R0", "R1", "R2", "R3", "I0", "I1", "I2", "I3", "L0", "L1", "L2", "L3", + "ASTAT" BFIN_HWLOOP0_REGS BFIN_HWLOOP1_REGS ); } diff -Nru speex-1.2~rc1.2/libspeex/filters.c speex-1.2.0/libspeex/filters.c --- speex-1.2~rc1.2/libspeex/filters.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/filters.c 2015-07-06 15:02:01.000000000 +0000 @@ -1,22 +1,22 @@ -/* Copyright (C) 2002-2006 Jean-Marc Valin +/* Copyright (C) 2002-2006 Jean-Marc Valin File: filters.c Various analysis/synthesis filters Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -93,7 +93,7 @@ const spx_word16_t *den, *num; if (filtID>4) filtID=4; - + den = Pcoef[filtID]; num = Zcoef[filtID]; /*return;*/ for (i=0;i>1; N2 = N>>1; ALLOC(xx1, M2+N2, spx_word16_t); @@ -564,6 +574,10 @@ for (i = 0; i < M2; i++) mem2[2*i+1] = xx2[i]; } +#endif /* DISABLE_WIDEBAND */ + + +#ifndef DISABLE_DECODER #ifdef FIXED_POINT #if 0 @@ -587,7 +601,7 @@ #endif #endif -int interp_pitch( +static int interp_pitch( spx_word16_t *exc, /*decoded excitation*/ spx_word16_t *interp, /*decoded excitation*/ int pitch, /*pitch period*/ @@ -662,11 +676,11 @@ char *stack ) { - int i; + int i; VARDECL(spx_word16_t *iexc); spx_word16_t old_ener, new_ener; int corr_pitch; - + spx_word16_t iexc0_mag, iexc1_mag, exc_mag; spx_word32_t corr0, corr1; spx_word16_t gain0, gain1; @@ -682,7 +696,7 @@ int nol_pitch[6]; spx_word16_t nol_pitch_coef[6]; spx_word16_t ol_pitch_coef; - open_loop_nbest_pitch(exc, 20, 120, nsf, + open_loop_nbest_pitch(exc, 20, 120, nsf, nol_pitch, nol_pitch_coef, 6, stack); corr_pitch=nol_pitch[0]; ol_pitch_coef = nol_pitch_coef[0]; @@ -690,11 +704,11 @@ for (i=1;i<6;i++) { #ifdef FIXED_POINT - if ((nol_pitch_coef[i]>MULT16_16_Q15(nol_pitch_coef[0],19661)) && + if ((nol_pitch_coef[i]>MULT16_16_Q15(nol_pitch_coef[0],19661)) && #else - if ((nol_pitch_coef[i]>.6*nol_pitch_coef[0]) && + if ((nol_pitch_coef[i]>.6*nol_pitch_coef[0]) && #endif - (ABS(2*nol_pitch[i]-corr_pitch)<=2 || ABS(3*nol_pitch[i]-corr_pitch)<=3 || + (ABS(2*nol_pitch[i]-corr_pitch)<=2 || ABS(3*nol_pitch[i]-corr_pitch)<=3 || ABS(4*nol_pitch[i]-corr_pitch)<=4 || ABS(5*nol_pitch[i]-corr_pitch)<=5)) { corr_pitch = nol_pitch[i]; @@ -703,9 +717,9 @@ #else corr_pitch = pitch; #endif - + ALLOC(iexc, 2*nsf, spx_word16_t); - + interp_pitch(exc, iexc, corr_pitch, 80); if (corr_pitch>max_pitch) interp_pitch(exc, iexc+nsf, 2*corr_pitch, 80); @@ -730,7 +744,7 @@ } #endif /*interp_pitch(exc, iexc+2*nsf, 2*corr_pitch, 80);*/ - + /*printf ("%d %d %f\n", pitch, corr_pitch, max_corr*ener_1);*/ iexc0_mag = spx_sqrt(1000+inner_prod(iexc,iexc,nsf)); iexc1_mag = spx_sqrt(1000+inner_prod(iexc+nsf,iexc+nsf,nsf)); @@ -767,7 +781,7 @@ c1 = .4*comb_gain+.07; c2 = .5+1.72*(c1-.07); #endif - } else + } else { c1=c2=0; } @@ -797,7 +811,7 @@ /* FIXME: compute_rms16 is currently not quite accurate enough (but close) */ new_ener = compute_rms16(new_exc, nsf); old_ener = compute_rms16(exc, nsf); - + if (old_ener < 1) old_ener = 1; if (new_ener < 1) @@ -805,7 +819,7 @@ if (old_ener > new_ener) old_ener = new_ener; ngain = PDIV32_16(SHL32(EXTEND32(old_ener),14),new_ener); - + for (i=0;i -#include -#include -#include "os_support.h" - -#ifndef NULL -#define NULL 0 -#endif - -#define SPEEX_JITTER_MAX_BUFFER_SIZE 200 /**< Maximum number of packets in jitter buffer */ - -#define TSUB(a,b) ((spx_int32_t)((a)-(b))) - -#define GT32(a,b) (((spx_int32_t)((a)-(b)))>0) -#define GE32(a,b) (((spx_int32_t)((a)-(b)))>=0) -#define LT32(a,b) (((spx_int32_t)((a)-(b)))<0) -#define LE32(a,b) (((spx_int32_t)((a)-(b)))<=0) - -#define ROUND_DOWN(x, step) ((x)<0 ? ((x)-(step)+1)/(step)*(step) : (x)/(step)*(step)) - -#define MAX_TIMINGS 40 -#define MAX_BUFFERS 3 -#define TOP_DELAY 40 - -/** Buffer that keeps the time of arrival of the latest packets */ -struct TimingBuffer { - int filled; /**< Number of entries occupied in "timing" and "counts"*/ - int curr_count; /**< Number of packet timings we got (including those we discarded) */ - spx_int32_t timing[MAX_TIMINGS]; /**< Sorted list of all timings ("latest" packets first) */ - spx_int16_t counts[MAX_TIMINGS]; /**< Order the packets were put in (will be used for short-term estimate) */ -}; - -static void tb_init(struct TimingBuffer *tb) -{ - tb->filled = 0; - tb->curr_count = 0; -} - -/* Add the timing of a new packet to the TimingBuffer */ -static void tb_add(struct TimingBuffer *tb, spx_int16_t timing) -{ - int pos; - /* Discard packet that won't make it into the list because they're too early */ - if (tb->filled >= MAX_TIMINGS && timing >= tb->timing[tb->filled-1]) - { - tb->curr_count++; - return; - } - - /* Find where the timing info goes in the sorted list */ - pos = 0; - /* FIXME: Do bisection instead of linear search */ - while (posfilled && timing >= tb->timing[pos]) - { - pos++; - } - - speex_assert(pos <= tb->filled && pos < MAX_TIMINGS); - - /* Shift everything so we can perform the insertion */ - if (pos < tb->filled) - { - int move_size = tb->filled-pos; - if (tb->filled == MAX_TIMINGS) - move_size -= 1; - SPEEX_MOVE(&tb->timing[pos+1], &tb->timing[pos], move_size); - SPEEX_MOVE(&tb->counts[pos+1], &tb->counts[pos], move_size); - } - /* Insert */ - tb->timing[pos] = timing; - tb->counts[pos] = tb->curr_count; - - tb->curr_count++; - if (tb->filledfilled++; -} - - - -/** Jitter buffer structure */ -struct JitterBuffer_ { - spx_uint32_t pointer_timestamp; /**< Timestamp of what we will *get* next */ - spx_uint32_t last_returned_timestamp; /**< Useful for getting the next packet with the same timestamp (for fragmented media) */ - spx_uint32_t next_stop; /**< Estimated time the next get() will be called */ - - spx_int32_t buffered; /**< Amount of data we think is still buffered by the application (timestamp units)*/ - - JitterBufferPacket packets[SPEEX_JITTER_MAX_BUFFER_SIZE]; /**< Packets stored in the buffer */ - spx_uint32_t arrival[SPEEX_JITTER_MAX_BUFFER_SIZE]; /**< Packet arrival time (0 means it was late, even though it's a valid timestamp) */ - - void (*destroy) (void *); /**< Callback for destroying a packet */ - - spx_int32_t delay_step; /**< Size of the steps when adjusting buffering (timestamp units) */ - spx_int32_t concealment_size; /**< Size of the packet loss concealment "units" */ - int reset_state; /**< True if state was just reset */ - int buffer_margin; /**< How many frames we want to keep in the buffer (lower bound) */ - int late_cutoff; /**< How late must a packet be for it not to be considered at all */ - int interp_requested; /**< An interpolation is requested by speex_jitter_update_delay() */ - int auto_adjust; /**< Whether to automatically adjust the delay at any time */ - - struct TimingBuffer _tb[MAX_BUFFERS]; /**< Don't use those directly */ - struct TimingBuffer *timeBuffers[MAX_BUFFERS]; /**< Storing arrival time of latest frames so we can compute some stats */ - int window_size; /**< Total window over which the late frames are counted */ - int subwindow_size; /**< Sub-window size for faster computation */ - int max_late_rate; /**< Absolute maximum amount of late packets tolerable (in percent) */ - int latency_tradeoff; /**< Latency equivalent of losing one percent of packets */ - int auto_tradeoff; /**< Latency equivalent of losing one percent of packets (automatic default) */ - - int lost_count; /**< Number of consecutive lost packets */ -}; - -/** Based on available data, this computes the optimal delay for the jitter buffer. - The optimised function is in timestamp units and is: - cost = delay + late_factor*[number of frames that would be late if we used that delay] - @param tb Array of buffers - @param late_factor Equivalent cost of a late frame (in timestamp units) - */ -static spx_int16_t compute_opt_delay(JitterBuffer *jitter) -{ - int i; - spx_int16_t opt=0; - spx_int32_t best_cost=0x7fffffff; - int late = 0; - int pos[MAX_BUFFERS]; - int tot_count; - float late_factor; - int penalty_taken = 0; - int best = 0; - int worst = 0; - spx_int32_t deltaT; - struct TimingBuffer *tb; - - tb = jitter->_tb; - - /* Number of packet timings we have received (including those we didn't keep) */ - tot_count = 0; - for (i=0;ilatency_tradeoff != 0) - late_factor = jitter->latency_tradeoff * 100.0f / tot_count; - else - late_factor = jitter->auto_tradeoff * jitter->window_size/tot_count; - - /*fprintf(stderr, "late_factor = %f\n", late_factor);*/ - for (i=0;idelay_step); - pos[next]++; - - /* Actual cost function that tells us how bad using this delay would be */ - cost = -latest + late_factor*late; - /*fprintf(stderr, "cost %d = %d + %f * %d\n", cost, -latest, late_factor, late);*/ - if (cost < best_cost) - { - best_cost = cost; - opt = latest; - } - } else { - break; - } - - /* For the next timing we will consider, there will be one more late packet to count */ - late++; - /* Two-frame penalty if we're going to increase the amount of late frames (hysteresis) */ - if (latest >= 0 && !penalty_taken) - { - penalty_taken = 1; - late+=4; - } - } - - deltaT = best-worst; - /* This is a default "automatic latency tradeoff" when none is provided */ - jitter->auto_tradeoff = 1 + deltaT/TOP_DELAY; - /*fprintf(stderr, "auto_tradeoff = %d (%d %d %d)\n", jitter->auto_tradeoff, best, worst, i);*/ - - /* FIXME: Compute a short-term estimate too and combine with the long-term one */ - - /* Prevents reducing the buffer size when we haven't really had much data */ - if (tot_count < TOP_DELAY && opt > 0) - return 0; - return opt; -} - - -/** Initialise jitter buffer */ -EXPORT JitterBuffer *jitter_buffer_init(int step_size) -{ - JitterBuffer *jitter = (JitterBuffer*)speex_alloc(sizeof(JitterBuffer)); - if (jitter) - { - int i; - spx_int32_t tmp; - for (i=0;ipackets[i].data=NULL; - jitter->delay_step = step_size; - jitter->concealment_size = step_size; - /*FIXME: Should this be 0 or 1?*/ - jitter->buffer_margin = 0; - jitter->late_cutoff = 50; - jitter->destroy = NULL; - jitter->latency_tradeoff = 0; - jitter->auto_adjust = 1; - tmp = 4; - jitter_buffer_ctl(jitter, JITTER_BUFFER_SET_MAX_LATE_RATE, &tmp); - jitter_buffer_reset(jitter); - } - return jitter; -} - -/** Reset jitter buffer */ -EXPORT void jitter_buffer_reset(JitterBuffer *jitter) -{ - int i; - for (i=0;ipackets[i].data) - { - if (jitter->destroy) - jitter->destroy(jitter->packets[i].data); - else - speex_free(jitter->packets[i].data); - jitter->packets[i].data = NULL; - } - } - /* Timestamp is actually undefined at this point */ - jitter->pointer_timestamp = 0; - jitter->next_stop = 0; - jitter->reset_state = 1; - jitter->lost_count = 0; - jitter->buffered = 0; - jitter->auto_tradeoff = 32000; - - for (i=0;i_tb[i]); - jitter->timeBuffers[i] = &jitter->_tb[i]; - } - /*fprintf (stderr, "reset\n");*/ -} - -/** Destroy jitter buffer */ -EXPORT void jitter_buffer_destroy(JitterBuffer *jitter) -{ - jitter_buffer_reset(jitter); - speex_free(jitter); -} - -/** Take the following timing into consideration for future calculations */ -static void update_timings(JitterBuffer *jitter, spx_int32_t timing) -{ - if (timing < -32767) - timing = -32767; - if (timing > 32767) - timing = 32767; - /* If the current sub-window is full, perform a rotation and discard oldest sub-widow */ - if (jitter->timeBuffers[0]->curr_count >= jitter->subwindow_size) - { - int i; - /*fprintf(stderr, "Rotate buffer\n");*/ - struct TimingBuffer *tmp = jitter->timeBuffers[MAX_BUFFERS-1]; - for (i=MAX_BUFFERS-1;i>=1;i--) - jitter->timeBuffers[i] = jitter->timeBuffers[i-1]; - jitter->timeBuffers[0] = tmp; - tb_init(jitter->timeBuffers[0]); - } - tb_add(jitter->timeBuffers[0], timing); -} - -/** Compensate all timings when we do an adjustment of the buffering */ -static void shift_timings(JitterBuffer *jitter, spx_int16_t amount) -{ - int i, j; - for (i=0;itimeBuffers[i]->filled;j++) - jitter->timeBuffers[i]->timing[j] += amount; - } -} - - -/** Put one packet into the jitter buffer */ -EXPORT void jitter_buffer_put(JitterBuffer *jitter, const JitterBufferPacket *packet) -{ - int i,j; - int late; - /*fprintf (stderr, "put packet %d %d\n", timestamp, span);*/ - - /* Cleanup buffer (remove old packets that weren't played) */ - if (!jitter->reset_state) - { - for (i=0;ipackets[i].data && LE32(jitter->packets[i].timestamp + jitter->packets[i].span, jitter->pointer_timestamp)) - { - /*fprintf (stderr, "cleaned (not played)\n");*/ - if (jitter->destroy) - jitter->destroy(jitter->packets[i].data); - else - speex_free(jitter->packets[i].data); - jitter->packets[i].data = NULL; - } - } - } - - /*fprintf(stderr, "arrival: %d %d %d\n", packet->timestamp, jitter->next_stop, jitter->pointer_timestamp);*/ - /* Check if packet is late (could still be useful though) */ - if (!jitter->reset_state && LT32(packet->timestamp, jitter->next_stop)) - { - update_timings(jitter, ((spx_int32_t)packet->timestamp) - ((spx_int32_t)jitter->next_stop) - jitter->buffer_margin); - late = 1; - } else { - late = 0; - } - - /* For some reason, the consumer has failed the last 20 fetches. Make sure this packet is - * used to resync. */ - if (jitter->lost_count>20) - { - jitter_buffer_reset(jitter); - } - - /* Only insert the packet if it's not hopelessly late (i.e. totally useless) */ - if (jitter->reset_state || GE32(packet->timestamp+packet->span+jitter->delay_step, jitter->pointer_timestamp)) - { - - /*Find an empty slot in the buffer*/ - for (i=0;ipackets[i].data==NULL) - break; - } - - /*No place left in the buffer, need to make room for it by discarding the oldest packet */ - if (i==SPEEX_JITTER_MAX_BUFFER_SIZE) - { - int earliest=jitter->packets[0].timestamp; - i=0; - for (j=1;jpackets[i].data || LT32(jitter->packets[j].timestamp,earliest)) - { - earliest = jitter->packets[j].timestamp; - i=j; - } - } - if (jitter->destroy) - jitter->destroy(jitter->packets[i].data); - else - speex_free(jitter->packets[i].data); - jitter->packets[i].data=NULL; - /*fprintf (stderr, "Buffer is full, discarding earliest frame %d (currently at %d)\n", timestamp, jitter->pointer_timestamp);*/ - } - - /* Copy packet in buffer */ - if (jitter->destroy) - { - jitter->packets[i].data = packet->data; - } else { - jitter->packets[i].data=(char*)speex_alloc(packet->len); - for (j=0;jlen;j++) - jitter->packets[i].data[j]=packet->data[j]; - } - jitter->packets[i].timestamp=packet->timestamp; - jitter->packets[i].span=packet->span; - jitter->packets[i].len=packet->len; - jitter->packets[i].sequence=packet->sequence; - jitter->packets[i].user_data=packet->user_data; - if (jitter->reset_state || late) - jitter->arrival[i] = 0; - else - jitter->arrival[i] = jitter->next_stop; - } - - -} - -/** Get one packet from the jitter buffer */ -EXPORT int jitter_buffer_get(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t desired_span, spx_int32_t *start_offset) -{ - int i; - unsigned int j; - int incomplete = 0; - spx_int16_t opt; - - if (start_offset != NULL) - *start_offset = 0; - - /* Syncing on the first call */ - if (jitter->reset_state) - { - int found = 0; - /* Find the oldest packet */ - spx_uint32_t oldest=0; - for (i=0;ipackets[i].data && (!found || LT32(jitter->packets[i].timestamp,oldest))) - { - oldest = jitter->packets[i].timestamp; - found = 1; - } - } - if (found) - { - jitter->reset_state=0; - jitter->pointer_timestamp = oldest; - jitter->next_stop = oldest; - } else { - packet->timestamp = 0; - packet->span = jitter->interp_requested; - return JITTER_BUFFER_MISSING; - } - } - - - jitter->last_returned_timestamp = jitter->pointer_timestamp; - - if (jitter->interp_requested != 0) - { - packet->timestamp = jitter->pointer_timestamp; - packet->span = jitter->interp_requested; - - /* Increment the pointer because it got decremented in the delay update */ - jitter->pointer_timestamp += jitter->interp_requested; - packet->len = 0; - /*fprintf (stderr, "Deferred interpolate\n");*/ - - jitter->interp_requested = 0; - - jitter->buffered = packet->span - desired_span; - - return JITTER_BUFFER_INSERTION; - } - - /* Searching for the packet that fits best */ - - /* Search the buffer for a packet with the right timestamp and spanning the whole current chunk */ - for (i=0;ipackets[i].data && jitter->packets[i].timestamp==jitter->pointer_timestamp && GE32(jitter->packets[i].timestamp+jitter->packets[i].span,jitter->pointer_timestamp+desired_span)) - break; - } - - /* If no match, try for an "older" packet that still spans (fully) the current chunk */ - if (i==SPEEX_JITTER_MAX_BUFFER_SIZE) - { - for (i=0;ipackets[i].data && LE32(jitter->packets[i].timestamp, jitter->pointer_timestamp) && GE32(jitter->packets[i].timestamp+jitter->packets[i].span,jitter->pointer_timestamp+desired_span)) - break; - } - } - - /* If still no match, try for an "older" packet that spans part of the current chunk */ - if (i==SPEEX_JITTER_MAX_BUFFER_SIZE) - { - for (i=0;ipackets[i].data && LE32(jitter->packets[i].timestamp, jitter->pointer_timestamp) && GT32(jitter->packets[i].timestamp+jitter->packets[i].span,jitter->pointer_timestamp)) - break; - } - } - - /* If still no match, try for earliest packet possible */ - if (i==SPEEX_JITTER_MAX_BUFFER_SIZE) - { - int found = 0; - spx_uint32_t best_time=0; - int best_span=0; - int besti=0; - for (i=0;ipackets[i].data && LT32(jitter->packets[i].timestamp,jitter->pointer_timestamp+desired_span) && GE32(jitter->packets[i].timestamp,jitter->pointer_timestamp)) - { - if (!found || LT32(jitter->packets[i].timestamp,best_time) || (jitter->packets[i].timestamp==best_time && GT32(jitter->packets[i].span,best_span))) - { - best_time = jitter->packets[i].timestamp; - best_span = jitter->packets[i].span; - besti = i; - found = 1; - } - } - } - if (found) - { - i=besti; - incomplete = 1; - /*fprintf (stderr, "incomplete: %d %d %d %d\n", jitter->packets[i].timestamp, jitter->pointer_timestamp, chunk_size, jitter->packets[i].span);*/ - } - } - - /* If we find something */ - if (i!=SPEEX_JITTER_MAX_BUFFER_SIZE) - { - spx_int32_t offset; - - /* We (obviously) haven't lost this packet */ - jitter->lost_count = 0; - - /* In this case, 0 isn't as a valid timestamp */ - if (jitter->arrival[i] != 0) - { - update_timings(jitter, ((spx_int32_t)jitter->packets[i].timestamp) - ((spx_int32_t)jitter->arrival[i]) - jitter->buffer_margin); - } - - - /* Copy packet */ - if (jitter->destroy) - { - packet->data = jitter->packets[i].data; - packet->len = jitter->packets[i].len; - } else { - if (jitter->packets[i].len > packet->len) - { - speex_warning_int("jitter_buffer_get(): packet too large to fit. Size is", jitter->packets[i].len); - } else { - packet->len = jitter->packets[i].len; - } - for (j=0;jlen;j++) - packet->data[j] = jitter->packets[i].data[j]; - /* Remove packet */ - speex_free(jitter->packets[i].data); - } - jitter->packets[i].data = NULL; - /* Set timestamp and span (if requested) */ - offset = (spx_int32_t)jitter->packets[i].timestamp-(spx_int32_t)jitter->pointer_timestamp; - if (start_offset != NULL) - *start_offset = offset; - else if (offset != 0) - speex_warning_int("jitter_buffer_get() discarding non-zero start_offset", offset); - - packet->timestamp = jitter->packets[i].timestamp; - jitter->last_returned_timestamp = packet->timestamp; - - packet->span = jitter->packets[i].span; - packet->sequence = jitter->packets[i].sequence; - packet->user_data = jitter->packets[i].user_data; - /* Point to the end of the current packet */ - jitter->pointer_timestamp = jitter->packets[i].timestamp+jitter->packets[i].span; - - jitter->buffered = packet->span - desired_span; - - if (start_offset != NULL) - jitter->buffered += *start_offset; - - return JITTER_BUFFER_OK; - } - - - /* If we haven't found anything worth returning */ - - /*fprintf (stderr, "not found\n");*/ - jitter->lost_count++; - /*fprintf (stderr, "m");*/ - /*fprintf (stderr, "lost_count = %d\n", jitter->lost_count);*/ - - opt = compute_opt_delay(jitter); - - /* Should we force an increase in the buffer or just do normal interpolation? */ - if (opt < 0) - { - /* Need to increase buffering */ - - /* Shift histogram to compensate */ - shift_timings(jitter, -opt); - - packet->timestamp = jitter->pointer_timestamp; - packet->span = -opt; - /* Don't move the pointer_timestamp forward */ - packet->len = 0; - - jitter->buffered = packet->span - desired_span; - return JITTER_BUFFER_INSERTION; - /*jitter->pointer_timestamp -= jitter->delay_step;*/ - /*fprintf (stderr, "Forced to interpolate\n");*/ - } else { - /* Normal packet loss */ - packet->timestamp = jitter->pointer_timestamp; - - desired_span = ROUND_DOWN(desired_span, jitter->concealment_size); - packet->span = desired_span; - jitter->pointer_timestamp += desired_span; - packet->len = 0; - - jitter->buffered = packet->span - desired_span; - return JITTER_BUFFER_MISSING; - /*fprintf (stderr, "Normal loss\n");*/ - } - - -} - -EXPORT int jitter_buffer_get_another(JitterBuffer *jitter, JitterBufferPacket *packet) -{ - int i, j; - for (i=0;ipackets[i].data && jitter->packets[i].timestamp==jitter->last_returned_timestamp) - break; - } - if (i!=SPEEX_JITTER_MAX_BUFFER_SIZE) - { - /* Copy packet */ - packet->len = jitter->packets[i].len; - if (jitter->destroy) - { - packet->data = jitter->packets[i].data; - } else { - for (j=0;jlen;j++) - packet->data[j] = jitter->packets[i].data[j]; - /* Remove packet */ - speex_free(jitter->packets[i].data); - } - jitter->packets[i].data = NULL; - packet->timestamp = jitter->packets[i].timestamp; - packet->span = jitter->packets[i].span; - packet->sequence = jitter->packets[i].sequence; - packet->user_data = jitter->packets[i].user_data; - return JITTER_BUFFER_OK; - } else { - packet->data = NULL; - packet->len = 0; - packet->span = 0; - return JITTER_BUFFER_MISSING; - } -} - -/* Let the jitter buffer know it's the right time to adjust the buffering delay to the network conditions */ -static int _jitter_buffer_update_delay(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t *start_offset) -{ - spx_int16_t opt = compute_opt_delay(jitter); - /*fprintf(stderr, "opt adjustment is %d ", opt);*/ - - if (opt < 0) - { - shift_timings(jitter, -opt); - - jitter->pointer_timestamp += opt; - jitter->interp_requested = -opt; - /*fprintf (stderr, "Decision to interpolate %d samples\n", -opt);*/ - } else if (opt > 0) - { - shift_timings(jitter, -opt); - jitter->pointer_timestamp += opt; - /*fprintf (stderr, "Decision to drop %d samples\n", opt);*/ - } - - return opt; -} - -/* Let the jitter buffer know it's the right time to adjust the buffering delay to the network conditions */ -EXPORT int jitter_buffer_update_delay(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t *start_offset) -{ - /* If the programmer calls jitter_buffer_update_delay() directly, - automatically disable auto-adjustment */ - jitter->auto_adjust = 0; - - return _jitter_buffer_update_delay(jitter, packet, start_offset); -} - -/** Get pointer timestamp of jitter buffer */ -EXPORT int jitter_buffer_get_pointer_timestamp(JitterBuffer *jitter) -{ - return jitter->pointer_timestamp; -} - -EXPORT void jitter_buffer_tick(JitterBuffer *jitter) -{ - /* Automatically-adjust the buffering delay if requested */ - if (jitter->auto_adjust) - _jitter_buffer_update_delay(jitter, NULL, NULL); - - if (jitter->buffered >= 0) - { - jitter->next_stop = jitter->pointer_timestamp - jitter->buffered; - } else { - jitter->next_stop = jitter->pointer_timestamp; - speex_warning_int("jitter buffer sees negative buffering, your code might be broken. Value is ", jitter->buffered); - } - jitter->buffered = 0; -} - -EXPORT void jitter_buffer_remaining_span(JitterBuffer *jitter, spx_uint32_t rem) -{ - /* Automatically-adjust the buffering delay if requested */ - if (jitter->auto_adjust) - _jitter_buffer_update_delay(jitter, NULL, NULL); - - if (jitter->buffered < 0) - speex_warning_int("jitter buffer sees negative buffering, your code might be broken. Value is ", jitter->buffered); - jitter->next_stop = jitter->pointer_timestamp - rem; -} - - -/* Used like the ioctl function to control the jitter buffer parameters */ -EXPORT int jitter_buffer_ctl(JitterBuffer *jitter, int request, void *ptr) -{ - int count, i; - switch(request) - { - case JITTER_BUFFER_SET_MARGIN: - jitter->buffer_margin = *(spx_int32_t*)ptr; - break; - case JITTER_BUFFER_GET_MARGIN: - *(spx_int32_t*)ptr = jitter->buffer_margin; - break; - case JITTER_BUFFER_GET_AVALIABLE_COUNT: - count = 0; - for (i=0;ipackets[i].data && LE32(jitter->pointer_timestamp, jitter->packets[i].timestamp)) - { - count++; - } - } - *(spx_int32_t*)ptr = count; - break; - case JITTER_BUFFER_SET_DESTROY_CALLBACK: - jitter->destroy = (void (*) (void *))ptr; - break; - case JITTER_BUFFER_GET_DESTROY_CALLBACK: - *(void (**) (void *))ptr = jitter->destroy; - break; - case JITTER_BUFFER_SET_DELAY_STEP: - jitter->delay_step = *(spx_int32_t*)ptr; - break; - case JITTER_BUFFER_GET_DELAY_STEP: - *(spx_int32_t*)ptr = jitter->delay_step; - break; - case JITTER_BUFFER_SET_CONCEALMENT_SIZE: - jitter->concealment_size = *(spx_int32_t*)ptr; - break; - case JITTER_BUFFER_GET_CONCEALMENT_SIZE: - *(spx_int32_t*)ptr = jitter->concealment_size; - break; - case JITTER_BUFFER_SET_MAX_LATE_RATE: - jitter->max_late_rate = *(spx_int32_t*)ptr; - jitter->window_size = 100*TOP_DELAY/jitter->max_late_rate; - jitter->subwindow_size = jitter->window_size/MAX_BUFFERS; - break; - case JITTER_BUFFER_GET_MAX_LATE_RATE: - *(spx_int32_t*)ptr = jitter->max_late_rate; - break; - case JITTER_BUFFER_SET_LATE_COST: - jitter->latency_tradeoff = *(spx_int32_t*)ptr; - break; - case JITTER_BUFFER_GET_LATE_COST: - *(spx_int32_t*)ptr = jitter->latency_tradeoff; - break; - default: - speex_warning_int("Unknown jitter_buffer_ctl request: ", request); - return -1; - } - return 0; -} - diff -Nru speex-1.2~rc1.2/libspeex/kiss_fft.c speex-1.2.0/libspeex/kiss_fft.c --- speex-1.2~rc1.2/libspeex/kiss_fft.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/kiss_fft.c 2015-07-06 15:01:58.000000000 +0000 @@ -110,7 +110,7 @@ C_MUL(scratch[0],Fout[m] , *tw1 ); C_MUL(scratch[1],Fout[m2] , *tw2 ); C_MUL(scratch[2],Fout[m3] , *tw3 ); - + C_SUB( scratch[5] , *Fout, scratch[1] ); C_ADDTO(*Fout, scratch[1]); C_ADD( scratch[3] , scratch[0] , scratch[2] ); @@ -120,7 +120,7 @@ tw2 += fstride*2; tw3 += fstride*3; C_ADDTO( *Fout , scratch[3] ); - + Fout[m].r = scratch[5].r - scratch[4].i; Fout[m].i = scratch[5].i + scratch[4].r; Fout[m3].r = scratch[5].r + scratch[4].i; @@ -140,7 +140,7 @@ C_MUL4(scratch[0],Fout[m] , *tw1 ); C_MUL4(scratch[1],Fout[m2] , *tw2 ); C_MUL4(scratch[2],Fout[m3] , *tw3 ); - + Fout->r = PSHR16(Fout->r, 2); Fout->i = PSHR16(Fout->i, 2); C_SUB( scratch[5] , *Fout, scratch[1] ); @@ -154,7 +154,7 @@ tw2 += fstride*2; tw3 += fstride*3; C_ADDTO( *Fout , scratch[3] ); - + Fout[m].r = scratch[5].r + scratch[4].i; Fout[m].i = scratch[5].i - scratch[4].r; Fout[m3].r = scratch[5].r - scratch[4].i; @@ -292,7 +292,7 @@ /*CHECKBUF(scratchbuf,nscratchbuf,p);*/ if (p>17) speex_fatal("KissFFT: max radix supported is 17"); - + for ( u=0; unfft); diff -Nru speex-1.2~rc1.2/libspeex/kiss_fftr.c speex-1.2.0/libspeex/kiss_fftr.c --- speex-1.2~rc1.2/libspeex/kiss_fftr.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/kiss_fftr.c 2015-07-06 15:01:57.000000000 +0000 @@ -24,9 +24,9 @@ kiss_fft_cfg substate; kiss_fft_cpx * tmpbuf; kiss_fft_cpx * super_twiddles; -#ifdef USE_SIMD +#ifdef USE_SIMD long pad; -#endif +#endif }; kiss_fftr_cfg kiss_fftr_alloc(int nfft,int inverse_fft,void * mem,size_t * lenmem) @@ -96,12 +96,12 @@ * contains the sum of the even-numbered elements of the input time sequence * The imag part is the sum of the odd-numbered elements * - * The sum of tdc.r and tdc.i is the sum of the input time sequence. + * The sum of tdc.r and tdc.i is the sum of the input time sequence. * yielding DC of input time sequence - * The difference of tdc.r - tdc.i is the sum of the input (dot product) [1,-1,1,-1... + * The difference of tdc.r - tdc.i is the sum of the input (dot product) [1,-1,1,-1... * yielding Nyquist bin of input time sequence */ - + tdc.r = st->tmpbuf[0].r; tdc.i = st->tmpbuf[0].i; C_FIXDIV(tdc,2); @@ -109,14 +109,14 @@ CHECK_OVERFLOW_OP(tdc.r ,-, tdc.i); freqdata[0].r = tdc.r + tdc.i; freqdata[ncfft].r = tdc.r - tdc.i; -#ifdef USE_SIMD +#ifdef USE_SIMD freqdata[ncfft].i = freqdata[0].i = _mm_set1_ps(0); #else freqdata[ncfft].i = freqdata[0].i = 0; #endif for ( k=1;k <= ncfft/2 ; ++k ) { - fpk = st->tmpbuf[k]; + fpk = st->tmpbuf[k]; fpnk.r = st->tmpbuf[ncfft-k].r; fpnk.i = - st->tmpbuf[ncfft-k].i; C_FIXDIV(fpk,2); @@ -161,7 +161,7 @@ C_MUL (fok, tmp, st->super_twiddles[k]); C_ADD (st->tmpbuf[k], fek, fok); C_SUB (st->tmpbuf[ncfft - k], fek, fok); -#ifdef USE_SIMD +#ifdef USE_SIMD st->tmpbuf[ncfft - k].i *= _mm_set1_ps(-1.0); #else st->tmpbuf[ncfft - k].i *= -1; @@ -189,12 +189,12 @@ * contains the sum of the even-numbered elements of the input time sequence * The imag part is the sum of the odd-numbered elements * - * The sum of tdc.r and tdc.i is the sum of the input time sequence. + * The sum of tdc.r and tdc.i is the sum of the input time sequence. * yielding DC of input time sequence - * The difference of tdc.r - tdc.i is the sum of the input (dot product) [1,-1,1,-1... + * The difference of tdc.r - tdc.i is the sum of the input (dot product) [1,-1,1,-1... * yielding Nyquist bin of input time sequence */ - + tdc.r = st->tmpbuf[0].r; tdc.i = st->tmpbuf[0].i; C_FIXDIV(tdc,2); @@ -205,7 +205,7 @@ for ( k=1;k <= ncfft/2 ; ++k ) { - /*fpk = st->tmpbuf[k]; + /*fpk = st->tmpbuf[k]; fpnk.r = st->tmpbuf[ncfft-k].r; fpnk.i = - st->tmpbuf[ncfft-k].i; C_FIXDIV(fpk,2); @@ -213,7 +213,7 @@ C_ADD( f1k, fpk , fpnk ); C_SUB( f2k, fpk , fpnk ); - + C_MUL( tw , f2k , st->super_twiddles[k]); freqdata[2*k-1] = HALF_OF(f1k.r + tw.r); @@ -226,7 +226,7 @@ f1k.i = PSHR32(SUB32(EXTEND32(st->tmpbuf[k].i), EXTEND32(st->tmpbuf[ncfft-k].i)),1); f2k.r = PSHR32(SUB32(EXTEND32(st->tmpbuf[k].r), EXTEND32(st->tmpbuf[ncfft-k].r)),1); f2k.i = SHR32(ADD32(EXTEND32(st->tmpbuf[k].i), EXTEND32(st->tmpbuf[ncfft-k].i)),1); - + C_MUL( tw , f2k , st->super_twiddles[k]); freqdata[2*k-1] = HALF_OF(f1k.r + tw.r); @@ -236,13 +236,13 @@ */ f2k.r = SHR32(SUB32(EXTEND32(st->tmpbuf[k].r), EXTEND32(st->tmpbuf[ncfft-k].r)),1); f2k.i = PSHR32(ADD32(EXTEND32(st->tmpbuf[k].i), EXTEND32(st->tmpbuf[ncfft-k].i)),1); - + f1kr = SHL32(ADD32(EXTEND32(st->tmpbuf[k].r), EXTEND32(st->tmpbuf[ncfft-k].r)),13); f1ki = SHL32(SUB32(EXTEND32(st->tmpbuf[k].i), EXTEND32(st->tmpbuf[ncfft-k].i)),13); - + twr = SHR32(SUB32(MULT16_16(f2k.r,st->super_twiddles[k].r),MULT16_16(f2k.i,st->super_twiddles[k].i)), 1); twi = SHR32(ADD32(MULT16_16(f2k.i,st->super_twiddles[k].r),MULT16_16(f2k.r,st->super_twiddles[k].i)), 1); - + #ifdef FIXED_POINT freqdata[2*k-1] = PSHR32(f1kr + twr, 15); freqdata[2*k] = PSHR32(f1ki + twi, 15); @@ -253,7 +253,7 @@ freqdata[2*k] = .5f*(f1ki + twi); freqdata[2*(ncfft-k)-1] = .5f*(f1kr - twr); freqdata[2*(ncfft-k)] = .5f*(twi - f1ki); - + #endif } } @@ -287,7 +287,7 @@ C_MUL (fok, tmp, st->super_twiddles[k]); C_ADD (st->tmpbuf[k], fek, fok); C_SUB (st->tmpbuf[ncfft - k], fek, fok); -#ifdef USE_SIMD +#ifdef USE_SIMD st->tmpbuf[ncfft - k].i *= _mm_set1_ps(-1.0); #else st->tmpbuf[ncfft - k].i *= -1; diff -Nru speex-1.2~rc1.2/libspeex/lpc_bfin.h speex-1.2.0/libspeex/lpc_bfin.h --- speex-1.2~rc1.2/libspeex/lpc_bfin.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/lpc_bfin.h 2015-07-06 15:01:58.000000000 +0000 @@ -33,6 +33,8 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include "bfin.h" + #define OVERRIDE_SPEEX_AUTOCORR void _spx_autocorr( const spx_word16_t *x, /* in: [0...n-1] samples x */ @@ -107,7 +109,8 @@ "P0 += 4;\n\t" "LOOP_END pitch%=;\n\t" : : "m" (xs), "m" (x), "m" (ac32top), "m" (N_lag), "m" (lag_1), "m" (nshift) - : "A0", "A1", "P0", "P1", "P2", "P3", "P4", "R0", "R1", "R2", "R3", "R4", "I0", "I1", "L0", "L1", "B0", "B1", "memory" + : "A0", "A1", "P0", "P1", "P2", "P3", "P4", "R0", "R1", "R2", "R3", "R4", "I0", "I1", "L0", "L1", "B0", "B1", "memory", + "ASTAT" BFIN_HWLOOP0_REGS BFIN_HWLOOP1_REGS ); d=0; for (j=0;j>1; j++) + for (j = 0; j < (i+1)>>1; j++) { - spx_word16_t tmp = lpc[j]; - lpc[j] = MAC16_16_P13(lpc[j],r,lpc[i-1-j]); - lpc[i-1-j] = MAC16_16_P13(lpc[i-1-j],r,tmp); + spx_word16_t tmp1, tmp2; + /* It could be that j == i-1-j, in which case, we're updating the same value twice, which is OK */ + tmp1 = lpc[j]; + tmp2 = lpc[i-1-j]; + lpc[j] = MAC16_16_P13(tmp1,r,tmp2); + lpc[i-1-j] = MAC16_16_P13(tmp2,r,tmp1); } - if (i & 1) - lpc[j] = MAC16_16_P13(lpc[j],lpc[j],r); error = SUB16(error,MULT16_16_Q13(r,MULT16_16_Q13(error,r))); } @@ -128,7 +124,7 @@ void _spx_autocorr( const spx_word16_t *x, /* in: [0...n-1] samples x */ spx_word16_t *ac, /* out: [0...lag-1] ac values */ -int lag, +int lag, int n ) { @@ -136,7 +132,7 @@ int i, j; spx_word32_t ac0=1; int shift, ac_shift; - + for (j=0;j= -FREQ_SCALE)){ + + while(xr >= -FREQ_SCALE){ spx_word16_t dd; /* Modified by JMV to provide smaller steps around x=+-1 */ #ifdef FIXED_POINT @@ -376,7 +375,7 @@ /* once zero is found, reset initial interval to xr */ freq[j] = X2ANGLE(xm); xl = xm; - flag = 0; /* reset flag for next search */ + break; } else{ psuml=temp_psumr; @@ -387,6 +386,7 @@ return(roots); } +#endif /* DISABLE_ENCODER */ /*---------------------------------------------------------------------------*\ FUNCTION....: lsp_to_lpc() @@ -400,7 +400,7 @@ #ifdef FIXED_POINT -void lsp_to_lpc(spx_lsp_t *freq,spx_coef_t *ak,int lpcrdr, char *stack) +void lsp_to_lpc(const spx_lsp_t *freq,spx_coef_t *ak,int lpcrdr, char *stack) /* float *freq array of LSP frequencies in the x domain */ /* float *ak array of LPC coefficients */ /* int lpcrdr order of LPC coefficients */ @@ -415,14 +415,14 @@ VARDECL(spx_word32_t *xqmem); int m = lpcrdr>>1; - /* - + /* + Reconstruct P(z) and Q(z) by cascading second order polynomials in form 1 - 2cos(w)z(-1) + z(-2), where w is the LSP frequency. In the time domain this is: y(n) = x(n) - 2cos(w)x(n-1) + x(n-2) - + This is what the ALLOCS below are trying to do: int xp[m+1][lpcrdr+1+2]; // P matrix in QIMP @@ -444,7 +444,7 @@ ALLOC(xq, (m+1), spx_word32_t*); ALLOC(xqmem, (m+1)*(lpcrdr+1+2), spx_word32_t); - + for(i=0; i<=m; i++) { xp[i] = xpmem + i*(lpcrdr+1+2); xq[i] = xqmem + i*(lpcrdr+1+2); @@ -453,15 +453,15 @@ /* work out 2cos terms in Q14 */ ALLOC(freqn, lpcrdr, spx_word16_t); - for (i=0;i 32767) a = 32767; ak[j-1] = (short)a; - + } } #else -void lsp_to_lpc(spx_lsp_t *freq,spx_coef_t *ak,int lpcrdr, char *stack) +void lsp_to_lpc(const spx_lsp_t *freq,spx_coef_t *ak,int lpcrdr, char *stack) /* float *freq array of LSP frequencies in the x domain */ /* float *ak array of LPC coefficients */ /* int lpcrdr order of LPC coefficients */ @@ -589,13 +589,17 @@ #ifdef FIXED_POINT -/*Makes sure the LSPs are stable*/ -void lsp_enforce_margin(spx_lsp_t *lsp, int len, spx_word16_t margin) + +void lsp_interpolate(spx_lsp_t *old_lsp, spx_lsp_t *new_lsp, spx_lsp_t *lsp, int len, int subframe, int nb_subframes, spx_word16_t margin) { int i; spx_word16_t m = margin; spx_word16_t m2 = 25736-margin; - + spx_word16_t tmp = DIV32_16(SHL32(EXTEND32(1 + subframe),14),nb_subframes); + spx_word16_t tmp2 = 16384-tmp; + for (i=0;im2) @@ -610,24 +614,16 @@ } } - -void lsp_interpolate(spx_lsp_t *old_lsp, spx_lsp_t *new_lsp, spx_lsp_t *interp_lsp, int len, int subframe, int nb_subframes) -{ - int i; - spx_word16_t tmp = DIV32_16(SHL32(EXTEND32(1 + subframe),14),nb_subframes); - spx_word16_t tmp2 = 16384-tmp; - for (i=0;iLSP_SCALING*(M_PI-margin)) @@ -642,15 +638,4 @@ } } - -void lsp_interpolate(spx_lsp_t *old_lsp, spx_lsp_t *new_lsp, spx_lsp_t *interp_lsp, int len, int subframe, int nb_subframes) -{ - int i; - float tmp = (1.0f + subframe)/nb_subframes; - for (i=0;i #include "math_approx.h" #include "os_support.h" @@ -74,9 +73,11 @@ } #endif +#ifndef DISABLE_ENCODER + #ifndef OVERRIDE_PITCH_XCORR #if 0 /* HINT: Enable this for machines with enough registers (i.e. not x86) */ -void pitch_xcorr(const spx_word16_t *_x, const spx_word16_t *_y, spx_word32_t *corr, int len, int nb_pitch, char *stack) +static void pitch_xcorr(const spx_word16_t *_x, const spx_word16_t *_y, spx_word32_t *corr, int len, int nb_pitch, char *stack) { int i,j; for (i=0;ibest_sum && gain_sum<=max_gain) { best_sum=sum; best_cdbk=i; @@ -383,27 +384,31 @@ if (cumul_gain > 262144) max_gain = 31; - + x[0]=tmp1; x[1]=tmp1+nsf; x[2]=tmp1+2*nsf; - + for (j=0;j0) + bound = pp; + for (j=0;j0) + bound = pp+pitch; + for (;jgain_bits; gain_cdbk = params->gain_cdbk + 4*gain_cdbk_size*cdbk_offset; - + N=complexity; if (N>10) N=10; @@ -583,7 +588,7 @@ SPEEX_MEMSET(exc, 0, nsf); return start; } - + #ifdef FIXED_POINT /* Check if we need to scale everything down in the pitch search to avoid overflows */ for (i=0;i16383) { @@ -609,11 +614,11 @@ open_loop_nbest_pitch(sw, start, end, nsf, nbest, NULL, N, stack); else nbest[0] = start; - + ALLOC(best_exc, nsf, spx_sig_t); ALLOC(new_target, nsf, spx_word16_t); ALLOC(best_target, nsf, spx_word16_t); - + for (i=0;i +#ifndef LTP_H +#define LTP_H + +#include "speex/speex_bits.h" #include "arch.h" /** LTP parameters. */ @@ -49,7 +52,6 @@ #endif spx_word32_t inner_prod(const spx_word16_t *x, const spx_word16_t *y, int len); -void pitch_xcorr(const spx_word16_t *_x, const spx_word16_t *_y, spx_word32_t *corr, int len, int nb_pitch, char *stack); void open_loop_nbest_pitch(spx_word16_t *sw, int start, int end, int len, int *pitch, spx_word16_t *gain, int N, char *stack); @@ -139,3 +141,5 @@ spx_word16_t last_pitch_gain, int cdbk_offset ); + +#endif /* LTP_H */ diff -Nru speex-1.2~rc1.2/libspeex/Makefile.am speex-1.2.0/libspeex/Makefile.am --- speex-1.2~rc1.2/libspeex/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/Makefile.am 2015-07-06 15:01:59.000000000 +0000 @@ -1,21 +1,8 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies - -EXTRA_DIST=echo_diagnostic.m - -INCLUDES = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) @OGG_CFLAGS@ @FFT_CFLAGS@ - -lib_LTLIBRARIES = libspeex.la libspeexdsp.la - -# Sources for compilation in the library -libspeex_la_SOURCES = cb_search.c exc_10_32_table.c exc_8_128_table.c \ - filters.c gain_table.c hexc_table.c high_lsp_tables.c lsp.c \ - ltp.c speex.c stereo.c vbr.c vq.c bits.c exc_10_16_table.c \ - exc_20_32_table.c exc_5_256_table.c exc_5_64_table.c gain_table_lbr.c hexc_10_32_table.c \ - lpc.c lsp_tables_nb.c modes.c modes_wb.c nb_celp.c quant_lsp.c sb_celp.c \ - speex_callbacks.c speex_header.c window.c - +if BUILD_VORBIS_PSY + VPSY_SOURCE=vorbis_psy.c if BUILD_KISS_FFT FFTSRC=kiss_fft.c _kiss_fft_guts.h kiss_fft.h kiss_fftr.c kiss_fftr.h else @@ -25,31 +12,42 @@ FFTSRC= endif endif +else + VPSY_SOURCE= + FFTSRC= +endif + +AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include/speex -I$(top_builddir) @OGG_CFLAGS@ @FFT_CFLAGS@ + +lib_LTLIBRARIES = libspeex.la + +# Sources for compilation in the library +libspeex_la_SOURCES = $(VPSY_SOURCE) $(FFTSRC) cb_search.c exc_10_32_table.c exc_8_128_table.c \ + filters.c gain_table.c hexc_table.c high_lsp_tables.c lsp.c \ + ltp.c speex.c stereo.c vbr.c vq.c bits.c exc_10_16_table.c \ + exc_20_32_table.c exc_5_256_table.c exc_5_64_table.c gain_table_lbr.c hexc_10_32_table.c \ + lpc.c lsp_tables_nb.c modes.c modes_wb.c nb_celp.c quant_lsp.c sb_celp.c \ + speex_callbacks.c speex_header.c window.c -libspeexdsp_la_SOURCES = preprocess.c jitter.c mdf.c fftwrap.c filterbank.c resample.c buffer.c scal.c $(FFTSRC) -noinst_HEADERS = arch.h cb_search_arm4.h cb_search_bfin.h cb_search_sse.h \ +noinst_HEADERS = arch.h bfin.h cb_search_arm4.h cb_search_bfin.h cb_search_sse.h \ filters.h filters_arm4.h filters_bfin.h filters_sse.h fixed_arm4.h \ fixed_arm5e.h fixed_bfin.h fixed_debug.h lpc.h lpc_bfin.h ltp.h ltp_arm4.h \ ltp_sse.h math_approx.h misc_bfin.h nb_celp.h quant_lsp.h sb_celp.h \ stack_alloc.h vbr.h vq.h vq_arm4.h vq_bfin.h vq_sse.h cb_search.h fftwrap.h \ - filterbank.h fixed_generic.h lsp.h lsp_bfin.h ltp_bfin.h modes.h os_support.h \ - pseudofloat.h quant_lsp_bfin.h smallft.h vorbis_psy.h resample_sse.h + fixed_generic.h lsp.h lsp_bfin.h ltp_bfin.h modes.h os_support.h \ + quant_lsp_bfin.h smallft.h vorbis_psy.h libspeex_la_LDFLAGS = -no-undefined -version-info @SPEEX_LT_CURRENT@:@SPEEX_LT_REVISION@:@SPEEX_LT_AGE@ -libspeexdsp_la_LDFLAGS = -no-undefined -version-info @SPEEX_LT_CURRENT@:@SPEEX_LT_REVISION@:@SPEEX_LT_AGE@ +libspeex_la_LIBADD = $(LIBM) -noinst_PROGRAMS = testenc testenc_wb testenc_uwb testdenoise testecho testjitter +if BUILD_BINARIES +noinst_PROGRAMS = testenc testenc_wb testenc_uwb testenc_SOURCES = testenc.c -testenc_LDADD = libspeex.la +testenc_LDADD = libspeex.la $(LIBM) testenc_wb_SOURCES = testenc_wb.c -testenc_wb_LDADD = libspeex.la +testenc_wb_LDADD = libspeex.la $(LIBM) testenc_uwb_SOURCES = testenc_uwb.c -testenc_uwb_LDADD = libspeex.la -testdenoise_SOURCES = testdenoise.c -testdenoise_LDADD = libspeexdsp.la @FFT_LIBS@ -testecho_SOURCES = testecho.c -testecho_LDADD = libspeexdsp.la @FFT_LIBS@ -testjitter_SOURCES = testjitter.c -testjitter_LDADD = libspeexdsp.la @FFT_LIBS@ +testenc_uwb_LDADD = libspeex.la $(LIBM) +endif diff -Nru speex-1.2~rc1.2/libspeex/Makefile.in speex-1.2.0/libspeex/Makefile.in --- speex-1.2~rc1.2/libspeex/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -20,7 +20,17 @@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -83,17 +93,19 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ -noinst_PROGRAMS = testenc$(EXEEXT) testenc_wb$(EXEEXT) \ - testenc_uwb$(EXEEXT) testdenoise$(EXEEXT) testecho$(EXEEXT) \ - testjitter$(EXEEXT) +@BUILD_BINARIES_TRUE@noinst_PROGRAMS = testenc$(EXEEXT) \ +@BUILD_BINARIES_TRUE@ testenc_wb$(EXEEXT) testenc_uwb$(EXEEXT) subdir = libspeex -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp $(noinst_HEADERS) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \ + $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -127,14 +139,29 @@ } am__installdirs = "$(DESTDIR)$(libdir)" LTLIBRARIES = $(lib_LTLIBRARIES) -libspeex_la_LIBADD = -am_libspeex_la_OBJECTS = cb_search.lo exc_10_32_table.lo \ - exc_8_128_table.lo filters.lo gain_table.lo hexc_table.lo \ - high_lsp_tables.lo lsp.lo ltp.lo speex.lo stereo.lo vbr.lo \ - vq.lo bits.lo exc_10_16_table.lo exc_20_32_table.lo \ - exc_5_256_table.lo exc_5_64_table.lo gain_table_lbr.lo \ - hexc_10_32_table.lo lpc.lo lsp_tables_nb.lo modes.lo \ - modes_wb.lo nb_celp.lo quant_lsp.lo sb_celp.lo \ +am__DEPENDENCIES_1 = +libspeex_la_DEPENDENCIES = $(am__DEPENDENCIES_1) +am__libspeex_la_SOURCES_DIST = vorbis_psy.c smallft.c kiss_fft.c \ + _kiss_fft_guts.h kiss_fft.h kiss_fftr.c kiss_fftr.h \ + cb_search.c exc_10_32_table.c exc_8_128_table.c filters.c \ + gain_table.c hexc_table.c high_lsp_tables.c lsp.c ltp.c \ + speex.c stereo.c vbr.c vq.c bits.c exc_10_16_table.c \ + exc_20_32_table.c exc_5_256_table.c exc_5_64_table.c \ + gain_table_lbr.c hexc_10_32_table.c lpc.c lsp_tables_nb.c \ + modes.c modes_wb.c nb_celp.c quant_lsp.c sb_celp.c \ + speex_callbacks.c speex_header.c window.c +@BUILD_VORBIS_PSY_TRUE@am__objects_1 = vorbis_psy.lo +@BUILD_KISS_FFT_FALSE@@BUILD_SMALLFT_TRUE@@BUILD_VORBIS_PSY_TRUE@am__objects_2 = smallft.lo +@BUILD_KISS_FFT_TRUE@@BUILD_VORBIS_PSY_TRUE@am__objects_2 = \ +@BUILD_KISS_FFT_TRUE@@BUILD_VORBIS_PSY_TRUE@ kiss_fft.lo \ +@BUILD_KISS_FFT_TRUE@@BUILD_VORBIS_PSY_TRUE@ kiss_fftr.lo +am_libspeex_la_OBJECTS = $(am__objects_1) $(am__objects_2) \ + cb_search.lo exc_10_32_table.lo exc_8_128_table.lo filters.lo \ + gain_table.lo hexc_table.lo high_lsp_tables.lo lsp.lo ltp.lo \ + speex.lo stereo.lo vbr.lo vq.lo bits.lo exc_10_16_table.lo \ + exc_20_32_table.lo exc_5_256_table.lo exc_5_64_table.lo \ + gain_table_lbr.lo hexc_10_32_table.lo lpc.lo lsp_tables_nb.lo \ + modes.lo modes_wb.lo nb_celp.lo quant_lsp.lo sb_celp.lo \ speex_callbacks.lo speex_header.lo window.lo libspeex_la_OBJECTS = $(am_libspeex_la_OBJECTS) AM_V_lt = $(am__v_lt_@AM_V@) @@ -144,38 +171,22 @@ libspeex_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libspeex_la_LDFLAGS) $(LDFLAGS) -o $@ -libspeexdsp_la_LIBADD = -am__libspeexdsp_la_SOURCES_DIST = preprocess.c jitter.c mdf.c \ - fftwrap.c filterbank.c resample.c buffer.c scal.c smallft.c \ - kiss_fft.c _kiss_fft_guts.h kiss_fft.h kiss_fftr.c kiss_fftr.h -@BUILD_KISS_FFT_FALSE@@BUILD_SMALLFT_TRUE@am__objects_1 = smallft.lo -@BUILD_KISS_FFT_TRUE@am__objects_1 = kiss_fft.lo kiss_fftr.lo -am_libspeexdsp_la_OBJECTS = preprocess.lo jitter.lo mdf.lo fftwrap.lo \ - filterbank.lo resample.lo buffer.lo scal.lo $(am__objects_1) -libspeexdsp_la_OBJECTS = $(am_libspeexdsp_la_OBJECTS) -libspeexdsp_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(AM_CFLAGS) $(CFLAGS) $(libspeexdsp_la_LDFLAGS) $(LDFLAGS) -o \ - $@ PROGRAMS = $(noinst_PROGRAMS) -am_testdenoise_OBJECTS = testdenoise.$(OBJEXT) -testdenoise_OBJECTS = $(am_testdenoise_OBJECTS) -testdenoise_DEPENDENCIES = libspeexdsp.la -am_testecho_OBJECTS = testecho.$(OBJEXT) -testecho_OBJECTS = $(am_testecho_OBJECTS) -testecho_DEPENDENCIES = libspeexdsp.la -am_testenc_OBJECTS = testenc.$(OBJEXT) +am__testenc_SOURCES_DIST = testenc.c +@BUILD_BINARIES_TRUE@am_testenc_OBJECTS = testenc.$(OBJEXT) testenc_OBJECTS = $(am_testenc_OBJECTS) -testenc_DEPENDENCIES = libspeex.la -am_testenc_uwb_OBJECTS = testenc_uwb.$(OBJEXT) +@BUILD_BINARIES_TRUE@testenc_DEPENDENCIES = libspeex.la \ +@BUILD_BINARIES_TRUE@ $(am__DEPENDENCIES_1) +am__testenc_uwb_SOURCES_DIST = testenc_uwb.c +@BUILD_BINARIES_TRUE@am_testenc_uwb_OBJECTS = testenc_uwb.$(OBJEXT) testenc_uwb_OBJECTS = $(am_testenc_uwb_OBJECTS) -testenc_uwb_DEPENDENCIES = libspeex.la -am_testenc_wb_OBJECTS = testenc_wb.$(OBJEXT) +@BUILD_BINARIES_TRUE@testenc_uwb_DEPENDENCIES = libspeex.la \ +@BUILD_BINARIES_TRUE@ $(am__DEPENDENCIES_1) +am__testenc_wb_SOURCES_DIST = testenc_wb.c +@BUILD_BINARIES_TRUE@am_testenc_wb_OBJECTS = testenc_wb.$(OBJEXT) testenc_wb_OBJECTS = $(am_testenc_wb_OBJECTS) -testenc_wb_DEPENDENCIES = libspeex.la -am_testjitter_OBJECTS = testjitter.$(OBJEXT) -testjitter_OBJECTS = $(am_testjitter_OBJECTS) -testjitter_DEPENDENCIES = libspeexdsp.la +@BUILD_BINARIES_TRUE@testenc_wb_DEPENDENCIES = libspeex.la \ +@BUILD_BINARIES_TRUE@ $(am__DEPENDENCIES_1) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false @@ -210,14 +221,11 @@ am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = -SOURCES = $(libspeex_la_SOURCES) $(libspeexdsp_la_SOURCES) \ - $(testdenoise_SOURCES) $(testecho_SOURCES) $(testenc_SOURCES) \ - $(testenc_uwb_SOURCES) $(testenc_wb_SOURCES) \ - $(testjitter_SOURCES) -DIST_SOURCES = $(libspeex_la_SOURCES) \ - $(am__libspeexdsp_la_SOURCES_DIST) $(testdenoise_SOURCES) \ - $(testecho_SOURCES) $(testenc_SOURCES) $(testenc_uwb_SOURCES) \ - $(testenc_wb_SOURCES) $(testjitter_SOURCES) +SOURCES = $(libspeex_la_SOURCES) $(testenc_SOURCES) \ + $(testenc_uwb_SOURCES) $(testenc_wb_SOURCES) +DIST_SOURCES = $(am__libspeex_la_SOURCES_DIST) \ + $(am__testenc_SOURCES_DIST) $(am__testenc_uwb_SOURCES_DIST) \ + $(am__testenc_wb_SOURCES_DIST) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ @@ -243,6 +251,7 @@ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags +am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -274,6 +283,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -281,12 +291,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -316,12 +328,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -366,53 +383,48 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -EXTRA_DIST = echo_diagnostic.m -INCLUDES = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) @OGG_CFLAGS@ @FFT_CFLAGS@ -lib_LTLIBRARIES = libspeex.la libspeexdsp.la +@BUILD_VORBIS_PSY_FALSE@VPSY_SOURCE = +@BUILD_VORBIS_PSY_TRUE@VPSY_SOURCE = vorbis_psy.c +@BUILD_KISS_FFT_FALSE@@BUILD_SMALLFT_FALSE@@BUILD_VORBIS_PSY_TRUE@FFTSRC = +@BUILD_KISS_FFT_FALSE@@BUILD_SMALLFT_TRUE@@BUILD_VORBIS_PSY_TRUE@FFTSRC = smallft.c +@BUILD_KISS_FFT_TRUE@@BUILD_VORBIS_PSY_TRUE@FFTSRC = kiss_fft.c _kiss_fft_guts.h kiss_fft.h kiss_fftr.c kiss_fftr.h +@BUILD_VORBIS_PSY_FALSE@FFTSRC = +AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include/speex -I$(top_builddir) @OGG_CFLAGS@ @FFT_CFLAGS@ +lib_LTLIBRARIES = libspeex.la # Sources for compilation in the library -libspeex_la_SOURCES = cb_search.c exc_10_32_table.c exc_8_128_table.c \ +libspeex_la_SOURCES = $(VPSY_SOURCE) $(FFTSRC) cb_search.c exc_10_32_table.c exc_8_128_table.c \ filters.c gain_table.c hexc_table.c high_lsp_tables.c lsp.c \ ltp.c speex.c stereo.c vbr.c vq.c bits.c exc_10_16_table.c \ exc_20_32_table.c exc_5_256_table.c exc_5_64_table.c gain_table_lbr.c hexc_10_32_table.c \ lpc.c lsp_tables_nb.c modes.c modes_wb.c nb_celp.c quant_lsp.c sb_celp.c \ speex_callbacks.c speex_header.c window.c -@BUILD_KISS_FFT_FALSE@@BUILD_SMALLFT_FALSE@FFTSRC = -@BUILD_KISS_FFT_FALSE@@BUILD_SMALLFT_TRUE@FFTSRC = smallft.c -@BUILD_KISS_FFT_TRUE@FFTSRC = kiss_fft.c _kiss_fft_guts.h kiss_fft.h kiss_fftr.c kiss_fftr.h -libspeexdsp_la_SOURCES = preprocess.c jitter.c mdf.c fftwrap.c filterbank.c resample.c buffer.c scal.c $(FFTSRC) -noinst_HEADERS = arch.h cb_search_arm4.h cb_search_bfin.h cb_search_sse.h \ +noinst_HEADERS = arch.h bfin.h cb_search_arm4.h cb_search_bfin.h cb_search_sse.h \ filters.h filters_arm4.h filters_bfin.h filters_sse.h fixed_arm4.h \ fixed_arm5e.h fixed_bfin.h fixed_debug.h lpc.h lpc_bfin.h ltp.h ltp_arm4.h \ ltp_sse.h math_approx.h misc_bfin.h nb_celp.h quant_lsp.h sb_celp.h \ stack_alloc.h vbr.h vq.h vq_arm4.h vq_bfin.h vq_sse.h cb_search.h fftwrap.h \ - filterbank.h fixed_generic.h lsp.h lsp_bfin.h ltp_bfin.h modes.h os_support.h \ - pseudofloat.h quant_lsp_bfin.h smallft.h vorbis_psy.h resample_sse.h + fixed_generic.h lsp.h lsp_bfin.h ltp_bfin.h modes.h os_support.h \ + quant_lsp_bfin.h smallft.h vorbis_psy.h libspeex_la_LDFLAGS = -no-undefined -version-info @SPEEX_LT_CURRENT@:@SPEEX_LT_REVISION@:@SPEEX_LT_AGE@ -libspeexdsp_la_LDFLAGS = -no-undefined -version-info @SPEEX_LT_CURRENT@:@SPEEX_LT_REVISION@:@SPEEX_LT_AGE@ -testenc_SOURCES = testenc.c -testenc_LDADD = libspeex.la -testenc_wb_SOURCES = testenc_wb.c -testenc_wb_LDADD = libspeex.la -testenc_uwb_SOURCES = testenc_uwb.c -testenc_uwb_LDADD = libspeex.la -testdenoise_SOURCES = testdenoise.c -testdenoise_LDADD = libspeexdsp.la @FFT_LIBS@ -testecho_SOURCES = testecho.c -testecho_LDADD = libspeexdsp.la @FFT_LIBS@ -testjitter_SOURCES = testjitter.c -testjitter_LDADD = libspeexdsp.la @FFT_LIBS@ +libspeex_la_LIBADD = $(LIBM) +@BUILD_BINARIES_TRUE@testenc_SOURCES = testenc.c +@BUILD_BINARIES_TRUE@testenc_LDADD = libspeex.la $(LIBM) +@BUILD_BINARIES_TRUE@testenc_wb_SOURCES = testenc_wb.c +@BUILD_BINARIES_TRUE@testenc_wb_LDADD = libspeex.la $(LIBM) +@BUILD_BINARIES_TRUE@testenc_uwb_SOURCES = testenc_uwb.c +@BUILD_BINARIES_TRUE@testenc_uwb_LDADD = libspeex.la $(LIBM) all: all-am .SUFFIXES: @@ -426,10 +438,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu libspeex/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libspeex/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu libspeex/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign libspeex/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -486,9 +497,6 @@ libspeex.la: $(libspeex_la_OBJECTS) $(libspeex_la_DEPENDENCIES) $(EXTRA_libspeex_la_DEPENDENCIES) $(AM_V_CCLD)$(libspeex_la_LINK) -rpath $(libdir) $(libspeex_la_OBJECTS) $(libspeex_la_LIBADD) $(LIBS) -libspeexdsp.la: $(libspeexdsp_la_OBJECTS) $(libspeexdsp_la_DEPENDENCIES) $(EXTRA_libspeexdsp_la_DEPENDENCIES) - $(AM_V_CCLD)$(libspeexdsp_la_LINK) -rpath $(libdir) $(libspeexdsp_la_OBJECTS) $(libspeexdsp_la_LIBADD) $(LIBS) - clean-noinstPROGRAMS: @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ @@ -498,14 +506,6 @@ echo " rm -f" $$list; \ rm -f $$list -testdenoise$(EXEEXT): $(testdenoise_OBJECTS) $(testdenoise_DEPENDENCIES) $(EXTRA_testdenoise_DEPENDENCIES) - @rm -f testdenoise$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(testdenoise_OBJECTS) $(testdenoise_LDADD) $(LIBS) - -testecho$(EXEEXT): $(testecho_OBJECTS) $(testecho_DEPENDENCIES) $(EXTRA_testecho_DEPENDENCIES) - @rm -f testecho$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(testecho_OBJECTS) $(testecho_LDADD) $(LIBS) - testenc$(EXEEXT): $(testenc_OBJECTS) $(testenc_DEPENDENCIES) $(EXTRA_testenc_DEPENDENCIES) @rm -f testenc$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testenc_OBJECTS) $(testenc_LDADD) $(LIBS) @@ -518,10 +518,6 @@ @rm -f testenc_wb$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testenc_wb_OBJECTS) $(testenc_wb_LDADD) $(LIBS) -testjitter$(EXEEXT): $(testjitter_OBJECTS) $(testjitter_DEPENDENCIES) $(EXTRA_testjitter_DEPENDENCIES) - @rm -f testjitter$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(testjitter_OBJECTS) $(testjitter_LDADD) $(LIBS) - mostlyclean-compile: -rm -f *.$(OBJEXT) @@ -529,7 +525,6 @@ -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bits.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/buffer.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cb_search.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exc_10_16_table.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exc_10_32_table.Plo@am__quote@ @@ -537,42 +532,33 @@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exc_5_256_table.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exc_5_64_table.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exc_8_128_table.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fftwrap.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filterbank.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filters.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gain_table.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gain_table_lbr.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hexc_10_32_table.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hexc_table.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/high_lsp_tables.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jitter.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/kiss_fft.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/kiss_fftr.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lpc.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lsp.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lsp_tables_nb.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ltp.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mdf.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/modes.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/modes_wb.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nb_celp.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/preprocess.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/quant_lsp.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/resample.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sb_celp.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scal.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smallft.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/speex.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/speex_callbacks.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/speex_header.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stereo.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testdenoise.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testecho.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testenc.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testenc_uwb.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testenc_wb.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testjitter.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vbr.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vorbis_psy.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vq.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/window.Plo@am__quote@ @@ -810,6 +796,8 @@ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-libLTLIBRARIES +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/libspeex/mdf.c speex-1.2.0/libspeex/mdf.c --- speex-1.2~rc1.2/libspeex/mdf.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/mdf.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,1285 +0,0 @@ -/* Copyright (C) 2003-2008 Jean-Marc Valin - - File: mdf.c - Echo canceller based on the MDF algorithm (see below) - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -/* - The echo canceller is based on the MDF algorithm described in: - - J. S. Soo, K. K. Pang Multidelay block frequency adaptive filter, - IEEE Trans. Acoust. Speech Signal Process., Vol. ASSP-38, No. 2, - February 1990. - - We use the Alternatively Updated MDF (AUMDF) variant. Robustness to - double-talk is achieved using a variable learning rate as described in: - - Valin, J.-M., On Adjusting the Learning Rate in Frequency Domain Echo - Cancellation With Double-Talk. IEEE Transactions on Audio, - Speech and Language Processing, Vol. 15, No. 3, pp. 1030-1034, 2007. - http://people.xiph.org/~jm/papers/valin_taslp2006.pdf - - There is no explicit double-talk detection, but a continuous variation - in the learning rate based on residual echo, double-talk and background - noise. - - About the fixed-point version: - All the signals are represented with 16-bit words. The filter weights - are represented with 32-bit words, but only the top 16 bits are used - in most cases. The lower 16 bits are completely unreliable (due to the - fact that the update is done only on the top bits), but help in the - adaptation -- probably by removing a "threshold effect" due to - quantization (rounding going to zero) when the gradient is small. - - Another kludge that seems to work good: when performing the weight - update, we only move half the way toward the "goal" this seems to - reduce the effect of quantization noise in the update phase. This - can be seen as applying a gradient descent on a "soft constraint" - instead of having a hard constraint. - -*/ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "arch.h" -#include "speex/speex_echo.h" -#include "fftwrap.h" -#include "pseudofloat.h" -#include "math_approx.h" -#include "os_support.h" - -#ifndef M_PI -#define M_PI 3.14159265358979323846 -#endif - -#ifdef FIXED_POINT -#define WEIGHT_SHIFT 11 -#define NORMALIZE_SCALEDOWN 5 -#define NORMALIZE_SCALEUP 3 -#else -#define WEIGHT_SHIFT 0 -#endif - -#ifdef FIXED_POINT -#define WORD2INT(x) ((x) < -32767 ? -32768 : ((x) > 32766 ? 32767 : (x))) -#else -#define WORD2INT(x) ((x) < -32767.5f ? -32768 : ((x) > 32766.5f ? 32767 : floor(.5+(x)))) -#endif - -/* If enabled, the AEC will use a foreground filter and a background filter to be more robust to double-talk - and difficult signals in general. The cost is an extra FFT and a matrix-vector multiply */ -#define TWO_PATH - -#ifdef FIXED_POINT -static const spx_float_t MIN_LEAK = {20972, -22}; - -/* Constants for the two-path filter */ -static const spx_float_t VAR1_SMOOTH = {23593, -16}; -static const spx_float_t VAR2_SMOOTH = {23675, -15}; -static const spx_float_t VAR1_UPDATE = {16384, -15}; -static const spx_float_t VAR2_UPDATE = {16384, -16}; -static const spx_float_t VAR_BACKTRACK = {16384, -12}; -#define TOP16(x) ((x)>>16) - -#else - -static const spx_float_t MIN_LEAK = .005f; - -/* Constants for the two-path filter */ -static const spx_float_t VAR1_SMOOTH = .36f; -static const spx_float_t VAR2_SMOOTH = .7225f; -static const spx_float_t VAR1_UPDATE = .5f; -static const spx_float_t VAR2_UPDATE = .25f; -static const spx_float_t VAR_BACKTRACK = 4.f; -#define TOP16(x) (x) -#endif - - -#define PLAYBACK_DELAY 2 - -void speex_echo_get_residual(SpeexEchoState *st, spx_word32_t *Yout, int len); - - -/** Speex echo cancellation state. */ -struct SpeexEchoState_ { - int frame_size; /**< Number of samples processed each time */ - int window_size; - int M; - int cancel_count; - int adapted; - int saturated; - int screwed_up; - int C; /** Number of input channels (microphones) */ - int K; /** Number of output channels (loudspeakers) */ - spx_int32_t sampling_rate; - spx_word16_t spec_average; - spx_word16_t beta0; - spx_word16_t beta_max; - spx_word32_t sum_adapt; - spx_word16_t leak_estimate; - - spx_word16_t *e; /* scratch */ - spx_word16_t *x; /* Far-end input buffer (2N) */ - spx_word16_t *X; /* Far-end buffer (M+1 frames) in frequency domain */ - spx_word16_t *input; /* scratch */ - spx_word16_t *y; /* scratch */ - spx_word16_t *last_y; - spx_word16_t *Y; /* scratch */ - spx_word16_t *E; - spx_word32_t *PHI; /* scratch */ - spx_word32_t *W; /* (Background) filter weights */ -#ifdef TWO_PATH - spx_word16_t *foreground; /* Foreground filter weights */ - spx_word32_t Davg1; /* 1st recursive average of the residual power difference */ - spx_word32_t Davg2; /* 2nd recursive average of the residual power difference */ - spx_float_t Dvar1; /* Estimated variance of 1st estimator */ - spx_float_t Dvar2; /* Estimated variance of 2nd estimator */ -#endif - spx_word32_t *power; /* Power of the far-end signal */ - spx_float_t *power_1;/* Inverse power of far-end */ - spx_word16_t *wtmp; /* scratch */ -#ifdef FIXED_POINT - spx_word16_t *wtmp2; /* scratch */ -#endif - spx_word32_t *Rf; /* scratch */ - spx_word32_t *Yf; /* scratch */ - spx_word32_t *Xf; /* scratch */ - spx_word32_t *Eh; - spx_word32_t *Yh; - spx_float_t Pey; - spx_float_t Pyy; - spx_word16_t *window; - spx_word16_t *prop; - void *fft_table; - spx_word16_t *memX, *memD, *memE; - spx_word16_t preemph; - spx_word16_t notch_radius; - spx_mem_t *notch_mem; - - /* NOTE: If you only use speex_echo_cancel() and want to save some memory, remove this */ - spx_int16_t *play_buf; - int play_buf_pos; - int play_buf_started; -}; - -static inline void filter_dc_notch16(const spx_int16_t *in, spx_word16_t radius, spx_word16_t *out, int len, spx_mem_t *mem, int stride) -{ - int i; - spx_word16_t den2; -#ifdef FIXED_POINT - den2 = MULT16_16_Q15(radius,radius) + MULT16_16_Q15(QCONST16(.7,15),MULT16_16_Q15(32767-radius,32767-radius)); -#else - den2 = radius*radius + .7*(1-radius)*(1-radius); -#endif - /*printf ("%d %d %d %d %d %d\n", num[0], num[1], num[2], den[0], den[1], den[2]);*/ - for (i=0;i>= 1; - while(len--) - { - spx_word32_t part=0; - part = MAC16_16(part,*x++,*y++); - part = MAC16_16(part,*x++,*y++); - /* HINT: If you had a 40-bit accumulator, you could shift only at the end */ - sum = ADD32(sum,SHR32(part,6)); - } - return sum; -} - -/** Compute power spectrum of a half-complex (packed) vector */ -static inline void power_spectrum(const spx_word16_t *X, spx_word32_t *ps, int N) -{ - int i, j; - ps[0]=MULT16_16(X[0],X[0]); - for (i=1,j=1;i max_sum) - max_sum = prop[i]; - } - for (i=0;i -static FILE *rFile=NULL, *pFile=NULL, *oFile=NULL; - -static void dump_audio(const spx_int16_t *rec, const spx_int16_t *play, const spx_int16_t *out, int len) -{ - if (!(rFile && pFile && oFile)) - { - speex_fatal("Dump files not open"); - } - fwrite(rec, sizeof(spx_int16_t), len, rFile); - fwrite(play, sizeof(spx_int16_t), len, pFile); - fwrite(out, sizeof(spx_int16_t), len, oFile); -} -#endif - -/** Creates a new echo canceller state */ -EXPORT SpeexEchoState *speex_echo_state_init(int frame_size, int filter_length) -{ - return speex_echo_state_init_mc(frame_size, filter_length, 1, 1); -} - -EXPORT SpeexEchoState *speex_echo_state_init_mc(int frame_size, int filter_length, int nb_mic, int nb_speakers) -{ - int i,N,M, C, K; - SpeexEchoState *st = (SpeexEchoState *)speex_alloc(sizeof(SpeexEchoState)); - - st->K = nb_speakers; - st->C = nb_mic; - C=st->C; - K=st->K; -#ifdef DUMP_ECHO_CANCEL_DATA - if (rFile || pFile || oFile) - speex_fatal("Opening dump files twice"); - rFile = fopen("aec_rec.sw", "wb"); - pFile = fopen("aec_play.sw", "wb"); - oFile = fopen("aec_out.sw", "wb"); -#endif - - st->frame_size = frame_size; - st->window_size = 2*frame_size; - N = st->window_size; - M = st->M = (filter_length+st->frame_size-1)/frame_size; - st->cancel_count=0; - st->sum_adapt = 0; - st->saturated = 0; - st->screwed_up = 0; - /* This is the default sampling rate */ - st->sampling_rate = 8000; - st->spec_average = DIV32_16(SHL32(EXTEND32(st->frame_size), 15), st->sampling_rate); -#ifdef FIXED_POINT - st->beta0 = DIV32_16(SHL32(EXTEND32(st->frame_size), 16), st->sampling_rate); - st->beta_max = DIV32_16(SHL32(EXTEND32(st->frame_size), 14), st->sampling_rate); -#else - st->beta0 = (2.0f*st->frame_size)/st->sampling_rate; - st->beta_max = (.5f*st->frame_size)/st->sampling_rate; -#endif - st->leak_estimate = 0; - - st->fft_table = spx_fft_init(N); - - st->e = (spx_word16_t*)speex_alloc(C*N*sizeof(spx_word16_t)); - st->x = (spx_word16_t*)speex_alloc(K*N*sizeof(spx_word16_t)); - st->input = (spx_word16_t*)speex_alloc(C*st->frame_size*sizeof(spx_word16_t)); - st->y = (spx_word16_t*)speex_alloc(C*N*sizeof(spx_word16_t)); - st->last_y = (spx_word16_t*)speex_alloc(C*N*sizeof(spx_word16_t)); - st->Yf = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t)); - st->Rf = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t)); - st->Xf = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t)); - st->Yh = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t)); - st->Eh = (spx_word32_t*)speex_alloc((st->frame_size+1)*sizeof(spx_word32_t)); - - st->X = (spx_word16_t*)speex_alloc(K*(M+1)*N*sizeof(spx_word16_t)); - st->Y = (spx_word16_t*)speex_alloc(C*N*sizeof(spx_word16_t)); - st->E = (spx_word16_t*)speex_alloc(C*N*sizeof(spx_word16_t)); - st->W = (spx_word32_t*)speex_alloc(C*K*M*N*sizeof(spx_word32_t)); -#ifdef TWO_PATH - st->foreground = (spx_word16_t*)speex_alloc(M*N*C*K*sizeof(spx_word16_t)); -#endif - st->PHI = (spx_word32_t*)speex_alloc(N*sizeof(spx_word32_t)); - st->power = (spx_word32_t*)speex_alloc((frame_size+1)*sizeof(spx_word32_t)); - st->power_1 = (spx_float_t*)speex_alloc((frame_size+1)*sizeof(spx_float_t)); - st->window = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); - st->prop = (spx_word16_t*)speex_alloc(M*sizeof(spx_word16_t)); - st->wtmp = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); -#ifdef FIXED_POINT - st->wtmp2 = (spx_word16_t*)speex_alloc(N*sizeof(spx_word16_t)); - for (i=0;i>1;i++) - { - st->window[i] = (16383-SHL16(spx_cos(DIV32_16(MULT16_16(25736,i<<1),N)),1)); - st->window[N-i-1] = st->window[i]; - } -#else - for (i=0;iwindow[i] = .5-.5*cos(2*M_PI*i/N); -#endif - for (i=0;i<=st->frame_size;i++) - st->power_1[i] = FLOAT_ONE; - for (i=0;iW[i] = 0; - { - spx_word32_t sum = 0; - /* Ratio of ~10 between adaptation rate of first and last block */ - spx_word16_t decay = SHR32(spx_exp(NEG16(DIV32_16(QCONST16(2.4,11),M))),1); - st->prop[0] = QCONST16(.7, 15); - sum = EXTEND32(st->prop[0]); - for (i=1;iprop[i] = MULT16_16_Q15(st->prop[i-1], decay); - sum = ADD32(sum, EXTEND32(st->prop[i])); - } - for (i=M-1;i>=0;i--) - { - st->prop[i] = DIV32(MULT16_16(QCONST16(.8f,15), st->prop[i]),sum); - } - } - - st->memX = (spx_word16_t*)speex_alloc(K*sizeof(spx_word16_t)); - st->memD = (spx_word16_t*)speex_alloc(C*sizeof(spx_word16_t)); - st->memE = (spx_word16_t*)speex_alloc(C*sizeof(spx_word16_t)); - st->preemph = QCONST16(.9,15); - if (st->sampling_rate<12000) - st->notch_radius = QCONST16(.9, 15); - else if (st->sampling_rate<24000) - st->notch_radius = QCONST16(.982, 15); - else - st->notch_radius = QCONST16(.992, 15); - - st->notch_mem = (spx_mem_t*)speex_alloc(2*C*sizeof(spx_mem_t)); - st->adapted = 0; - st->Pey = st->Pyy = FLOAT_ONE; - -#ifdef TWO_PATH - st->Davg1 = st->Davg2 = 0; - st->Dvar1 = st->Dvar2 = FLOAT_ZERO; -#endif - - st->play_buf = (spx_int16_t*)speex_alloc(K*(PLAYBACK_DELAY+1)*st->frame_size*sizeof(spx_int16_t)); - st->play_buf_pos = PLAYBACK_DELAY*st->frame_size; - st->play_buf_started = 0; - - return st; -} - -/** Resets echo canceller state */ -EXPORT void speex_echo_state_reset(SpeexEchoState *st) -{ - int i, M, N, C, K; - st->cancel_count=0; - st->screwed_up = 0; - N = st->window_size; - M = st->M; - C=st->C; - K=st->K; - for (i=0;iW[i] = 0; -#ifdef TWO_PATH - for (i=0;iforeground[i] = 0; -#endif - for (i=0;iX[i] = 0; - for (i=0;i<=st->frame_size;i++) - { - st->power[i] = 0; - st->power_1[i] = FLOAT_ONE; - st->Eh[i] = 0; - st->Yh[i] = 0; - } - for (i=0;iframe_size;i++) - { - st->last_y[i] = 0; - } - for (i=0;iE[i] = 0; - } - for (i=0;ix[i] = 0; - } - for (i=0;i<2*C;i++) - st->notch_mem[i] = 0; - for (i=0;imemD[i]=st->memE[i]=0; - for (i=0;imemX[i]=0; - - st->saturated = 0; - st->adapted = 0; - st->sum_adapt = 0; - st->Pey = st->Pyy = FLOAT_ONE; -#ifdef TWO_PATH - st->Davg1 = st->Davg2 = 0; - st->Dvar1 = st->Dvar2 = FLOAT_ZERO; -#endif - for (i=0;i<3*st->frame_size;i++) - st->play_buf[i] = 0; - st->play_buf_pos = PLAYBACK_DELAY*st->frame_size; - st->play_buf_started = 0; - -} - -/** Destroys an echo canceller state */ -EXPORT void speex_echo_state_destroy(SpeexEchoState *st) -{ - spx_fft_destroy(st->fft_table); - - speex_free(st->e); - speex_free(st->x); - speex_free(st->input); - speex_free(st->y); - speex_free(st->last_y); - speex_free(st->Yf); - speex_free(st->Rf); - speex_free(st->Xf); - speex_free(st->Yh); - speex_free(st->Eh); - - speex_free(st->X); - speex_free(st->Y); - speex_free(st->E); - speex_free(st->W); -#ifdef TWO_PATH - speex_free(st->foreground); -#endif - speex_free(st->PHI); - speex_free(st->power); - speex_free(st->power_1); - speex_free(st->window); - speex_free(st->prop); - speex_free(st->wtmp); -#ifdef FIXED_POINT - speex_free(st->wtmp2); -#endif - speex_free(st->memX); - speex_free(st->memD); - speex_free(st->memE); - speex_free(st->notch_mem); - - speex_free(st->play_buf); - speex_free(st); - -#ifdef DUMP_ECHO_CANCEL_DATA - fclose(rFile); - fclose(pFile); - fclose(oFile); - rFile = pFile = oFile = NULL; -#endif -} - -EXPORT void speex_echo_capture(SpeexEchoState *st, const spx_int16_t *rec, spx_int16_t *out) -{ - int i; - /*speex_warning_int("capture with fill level ", st->play_buf_pos/st->frame_size);*/ - st->play_buf_started = 1; - if (st->play_buf_pos>=st->frame_size) - { - speex_echo_cancellation(st, rec, st->play_buf, out); - st->play_buf_pos -= st->frame_size; - for (i=0;iplay_buf_pos;i++) - st->play_buf[i] = st->play_buf[i+st->frame_size]; - } else { - speex_warning("No playback frame available (your application is buggy and/or got xruns)"); - if (st->play_buf_pos!=0) - { - speex_warning("internal playback buffer corruption?"); - st->play_buf_pos = 0; - } - for (i=0;iframe_size;i++) - out[i] = rec[i]; - } -} - -EXPORT void speex_echo_playback(SpeexEchoState *st, const spx_int16_t *play) -{ - /*speex_warning_int("playback with fill level ", st->play_buf_pos/st->frame_size);*/ - if (!st->play_buf_started) - { - speex_warning("discarded first playback frame"); - return; - } - if (st->play_buf_pos<=PLAYBACK_DELAY*st->frame_size) - { - int i; - for (i=0;iframe_size;i++) - st->play_buf[st->play_buf_pos+i] = play[i]; - st->play_buf_pos += st->frame_size; - if (st->play_buf_pos <= (PLAYBACK_DELAY-1)*st->frame_size) - { - speex_warning("Auto-filling the buffer (your application is buggy and/or got xruns)"); - for (i=0;iframe_size;i++) - st->play_buf[st->play_buf_pos+i] = play[i]; - st->play_buf_pos += st->frame_size; - } - } else { - speex_warning("Had to discard a playback frame (your application is buggy and/or got xruns)"); - } -} - -/** Performs echo cancellation on a frame (deprecated, last arg now ignored) */ -EXPORT void speex_echo_cancel(SpeexEchoState *st, const spx_int16_t *in, const spx_int16_t *far_end, spx_int16_t *out, spx_int32_t *Yout) -{ - speex_echo_cancellation(st, in, far_end, out); -} - -/** Performs echo cancellation on a frame */ -EXPORT void speex_echo_cancellation(SpeexEchoState *st, const spx_int16_t *in, const spx_int16_t *far_end, spx_int16_t *out) -{ - int i,j, chan, speak; - int N,M, C, K; - spx_word32_t Syy,See,Sxx,Sdd, Sff; -#ifdef TWO_PATH - spx_word32_t Dbf; - int update_foreground; -#endif - spx_word32_t Sey; - spx_word16_t ss, ss_1; - spx_float_t Pey = FLOAT_ONE, Pyy=FLOAT_ONE; - spx_float_t alpha, alpha_1; - spx_word16_t RER; - spx_word32_t tmp32; - - N = st->window_size; - M = st->M; - C = st->C; - K = st->K; - - st->cancel_count++; -#ifdef FIXED_POINT - ss=DIV32_16(11469,M); - ss_1 = SUB16(32767,ss); -#else - ss=.35/M; - ss_1 = 1-ss; -#endif - - for (chan = 0; chan < C; chan++) - { - /* Apply a notch filter to make sure DC doesn't end up causing problems */ - filter_dc_notch16(in+chan, st->notch_radius, st->input+chan*st->frame_size, st->frame_size, st->notch_mem+2*chan, C); - /* Copy input data to buffer and apply pre-emphasis */ - /* Copy input data to buffer */ - for (i=0;iframe_size;i++) - { - spx_word32_t tmp32; - /* FIXME: This core has changed a bit, need to merge properly */ - tmp32 = SUB32(EXTEND32(st->input[chan*st->frame_size+i]), EXTEND32(MULT16_16_P15(st->preemph, st->memD[chan]))); -#ifdef FIXED_POINT - if (tmp32 > 32767) - { - tmp32 = 32767; - if (st->saturated == 0) - st->saturated = 1; - } - if (tmp32 < -32767) - { - tmp32 = -32767; - if (st->saturated == 0) - st->saturated = 1; - } -#endif - st->memD[chan] = st->input[chan*st->frame_size+i]; - st->input[chan*st->frame_size+i] = EXTRACT16(tmp32); - } - } - - for (speak = 0; speak < K; speak++) - { - for (i=0;iframe_size;i++) - { - spx_word32_t tmp32; - st->x[speak*N+i] = st->x[speak*N+i+st->frame_size]; - tmp32 = SUB32(EXTEND32(far_end[i*K+speak]), EXTEND32(MULT16_16_P15(st->preemph, st->memX[speak]))); -#ifdef FIXED_POINT - /*FIXME: If saturation occurs here, we need to freeze adaptation for M frames (not just one) */ - if (tmp32 > 32767) - { - tmp32 = 32767; - st->saturated = M+1; - } - if (tmp32 < -32767) - { - tmp32 = -32767; - st->saturated = M+1; - } -#endif - st->x[speak*N+i+st->frame_size] = EXTRACT16(tmp32); - st->memX[speak] = far_end[i*K+speak]; - } - } - - for (speak = 0; speak < K; speak++) - { - /* Shift memory: this could be optimized eventually*/ - for (j=M-1;j>=0;j--) - { - for (i=0;iX[(j+1)*N*K+speak*N+i] = st->X[j*N*K+speak*N+i]; - } - /* Convert x (echo input) to frequency domain */ - spx_fft(st->fft_table, st->x+speak*N, &st->X[speak*N]); - } - - Sxx = 0; - for (speak = 0; speak < K; speak++) - { - Sxx += mdf_inner_prod(st->x+speak*N+st->frame_size, st->x+speak*N+st->frame_size, st->frame_size); - power_spectrum_accum(st->X+speak*N, st->Xf, N); - } - - Sff = 0; - for (chan = 0; chan < C; chan++) - { -#ifdef TWO_PATH - /* Compute foreground filter */ - spectral_mul_accum16(st->X, st->foreground+chan*N*K*M, st->Y+chan*N, N, M*K); - spx_ifft(st->fft_table, st->Y+chan*N, st->e+chan*N); - for (i=0;iframe_size;i++) - st->e[chan*N+i] = SUB16(st->input[chan*st->frame_size+i], st->e[chan*N+i+st->frame_size]); - Sff += mdf_inner_prod(st->e+chan*N, st->e+chan*N, st->frame_size); -#endif - } - - /* Adjust proportional adaption rate */ - /* FIXME: Adjust that for C, K*/ - if (st->adapted) - mdf_adjust_prop (st->W, N, M, C*K, st->prop); - /* Compute weight gradient */ - if (st->saturated == 0) - { - for (chan = 0; chan < C; chan++) - { - for (speak = 0; speak < K; speak++) - { - for (j=M-1;j>=0;j--) - { - weighted_spectral_mul_conj(st->power_1, FLOAT_SHL(PSEUDOFLOAT(st->prop[j]),-15), &st->X[(j+1)*N*K+speak*N], st->E+chan*N, st->PHI, N); - for (i=0;iW[chan*N*K*M + j*N*K + speak*N + i] += st->PHI[i]; - } - } - } - } else { - st->saturated--; - } - - /* FIXME: MC conversion required */ - /* Update weight to prevent circular convolution (MDF / AUMDF) */ - for (chan = 0; chan < C; chan++) - { - for (speak = 0; speak < K; speak++) - { - for (j=0;jcancel_count%(M-1) == j-1) - { -#ifdef FIXED_POINT - for (i=0;iwtmp2[i] = EXTRACT16(PSHR32(st->W[chan*N*K*M + j*N*K + speak*N + i],NORMALIZE_SCALEDOWN+16)); - spx_ifft(st->fft_table, st->wtmp2, st->wtmp); - for (i=0;iframe_size;i++) - { - st->wtmp[i]=0; - } - for (i=st->frame_size;iwtmp[i]=SHL16(st->wtmp[i],NORMALIZE_SCALEUP); - } - spx_fft(st->fft_table, st->wtmp, st->wtmp2); - /* The "-1" in the shift is a sort of kludge that trades less efficient update speed for decrease noise */ - for (i=0;iW[chan*N*K*M + j*N*K + speak*N + i] -= SHL32(EXTEND32(st->wtmp2[i]),16+NORMALIZE_SCALEDOWN-NORMALIZE_SCALEUP-1); -#else - spx_ifft(st->fft_table, &st->W[chan*N*K*M + j*N*K + speak*N], st->wtmp); - for (i=st->frame_size;iwtmp[i]=0; - } - spx_fft(st->fft_table, st->wtmp, &st->W[chan*N*K*M + j*N*K + speak*N]); -#endif - } - } - } - } - - /* So we can use power_spectrum_accum */ - for (i=0;i<=st->frame_size;i++) - st->Rf[i] = st->Yf[i] = st->Xf[i] = 0; - - Dbf = 0; - See = 0; -#ifdef TWO_PATH - /* Difference in response, this is used to estimate the variance of our residual power estimate */ - for (chan = 0; chan < C; chan++) - { - spectral_mul_accum(st->X, st->W+chan*N*K*M, st->Y+chan*N, N, M*K); - spx_ifft(st->fft_table, st->Y+chan*N, st->y+chan*N); - for (i=0;iframe_size;i++) - st->e[chan*N+i] = SUB16(st->e[chan*N+i+st->frame_size], st->y[chan*N+i+st->frame_size]); - Dbf += 10+mdf_inner_prod(st->e+chan*N, st->e+chan*N, st->frame_size); - for (i=0;iframe_size;i++) - st->e[chan*N+i] = SUB16(st->input[chan*st->frame_size+i], st->y[chan*N+i+st->frame_size]); - See += mdf_inner_prod(st->e+chan*N, st->e+chan*N, st->frame_size); - } -#endif - -#ifndef TWO_PATH - Sff = See; -#endif - -#ifdef TWO_PATH - /* Logic for updating the foreground filter */ - - /* For two time windows, compute the mean of the energy difference, as well as the variance */ - st->Davg1 = ADD32(MULT16_32_Q15(QCONST16(.6f,15),st->Davg1), MULT16_32_Q15(QCONST16(.4f,15),SUB32(Sff,See))); - st->Davg2 = ADD32(MULT16_32_Q15(QCONST16(.85f,15),st->Davg2), MULT16_32_Q15(QCONST16(.15f,15),SUB32(Sff,See))); - st->Dvar1 = FLOAT_ADD(FLOAT_MULT(VAR1_SMOOTH, st->Dvar1), FLOAT_MUL32U(MULT16_32_Q15(QCONST16(.4f,15),Sff), MULT16_32_Q15(QCONST16(.4f,15),Dbf))); - st->Dvar2 = FLOAT_ADD(FLOAT_MULT(VAR2_SMOOTH, st->Dvar2), FLOAT_MUL32U(MULT16_32_Q15(QCONST16(.15f,15),Sff), MULT16_32_Q15(QCONST16(.15f,15),Dbf))); - - /* Equivalent float code: - st->Davg1 = .6*st->Davg1 + .4*(Sff-See); - st->Davg2 = .85*st->Davg2 + .15*(Sff-See); - st->Dvar1 = .36*st->Dvar1 + .16*Sff*Dbf; - st->Dvar2 = .7225*st->Dvar2 + .0225*Sff*Dbf; - */ - - update_foreground = 0; - /* Check if we have a statistically significant reduction in the residual echo */ - /* Note that this is *not* Gaussian, so we need to be careful about the longer tail */ - if (FLOAT_GT(FLOAT_MUL32U(SUB32(Sff,See),ABS32(SUB32(Sff,See))), FLOAT_MUL32U(Sff,Dbf))) - update_foreground = 1; - else if (FLOAT_GT(FLOAT_MUL32U(st->Davg1, ABS32(st->Davg1)), FLOAT_MULT(VAR1_UPDATE,(st->Dvar1)))) - update_foreground = 1; - else if (FLOAT_GT(FLOAT_MUL32U(st->Davg2, ABS32(st->Davg2)), FLOAT_MULT(VAR2_UPDATE,(st->Dvar2)))) - update_foreground = 1; - - /* Do we update? */ - if (update_foreground) - { - st->Davg1 = st->Davg2 = 0; - st->Dvar1 = st->Dvar2 = FLOAT_ZERO; - /* Copy background filter to foreground filter */ - for (i=0;iforeground[i] = EXTRACT16(PSHR32(st->W[i],16)); - /* Apply a smooth transition so as to not introduce blocking artifacts */ - for (chan = 0; chan < C; chan++) - for (i=0;iframe_size;i++) - st->e[chan*N+i+st->frame_size] = MULT16_16_Q15(st->window[i+st->frame_size],st->e[chan*N+i+st->frame_size]) + MULT16_16_Q15(st->window[i],st->y[chan*N+i+st->frame_size]); - } else { - int reset_background=0; - /* Otherwise, check if the background filter is significantly worse */ - if (FLOAT_GT(FLOAT_MUL32U(NEG32(SUB32(Sff,See)),ABS32(SUB32(Sff,See))), FLOAT_MULT(VAR_BACKTRACK,FLOAT_MUL32U(Sff,Dbf)))) - reset_background = 1; - if (FLOAT_GT(FLOAT_MUL32U(NEG32(st->Davg1), ABS32(st->Davg1)), FLOAT_MULT(VAR_BACKTRACK,st->Dvar1))) - reset_background = 1; - if (FLOAT_GT(FLOAT_MUL32U(NEG32(st->Davg2), ABS32(st->Davg2)), FLOAT_MULT(VAR_BACKTRACK,st->Dvar2))) - reset_background = 1; - if (reset_background) - { - /* Copy foreground filter to background filter */ - for (i=0;iW[i] = SHL32(EXTEND32(st->foreground[i]),16); - /* We also need to copy the output so as to get correct adaptation */ - for (chan = 0; chan < C; chan++) - { - for (i=0;iframe_size;i++) - st->y[chan*N+i+st->frame_size] = st->e[chan*N+i+st->frame_size]; - for (i=0;iframe_size;i++) - st->e[chan*N+i] = SUB16(st->input[chan*st->frame_size+i], st->y[chan*N+i+st->frame_size]); - } - See = Sff; - st->Davg1 = st->Davg2 = 0; - st->Dvar1 = st->Dvar2 = FLOAT_ZERO; - } - } -#endif - - Sey = Syy = Sdd = 0; - for (chan = 0; chan < C; chan++) - { - /* Compute error signal (for the output with de-emphasis) */ - for (i=0;iframe_size;i++) - { - spx_word32_t tmp_out; -#ifdef TWO_PATH - tmp_out = SUB32(EXTEND32(st->input[chan*st->frame_size+i]), EXTEND32(st->e[chan*N+i+st->frame_size])); -#else - tmp_out = SUB32(EXTEND32(st->input[chan*st->frame_size+i]), EXTEND32(st->y[chan*N+i+st->frame_size])); -#endif - tmp_out = ADD32(tmp_out, EXTEND32(MULT16_16_P15(st->preemph, st->memE[chan]))); - /* This is an arbitrary test for saturation in the microphone signal */ - if (in[i*C+chan] <= -32000 || in[i*C+chan] >= 32000) - { - if (st->saturated == 0) - st->saturated = 1; - } - out[i*C+chan] = WORD2INT(tmp_out); - st->memE[chan] = tmp_out; - } - -#ifdef DUMP_ECHO_CANCEL_DATA - dump_audio(in, far_end, out, st->frame_size); -#endif - - /* Compute error signal (filter update version) */ - for (i=0;iframe_size;i++) - { - st->e[chan*N+i+st->frame_size] = st->e[chan*N+i]; - st->e[chan*N+i] = 0; - } - - /* Compute a bunch of correlations */ - /* FIXME: bad merge */ - Sey += mdf_inner_prod(st->e+chan*N+st->frame_size, st->y+chan*N+st->frame_size, st->frame_size); - Syy += mdf_inner_prod(st->y+chan*N+st->frame_size, st->y+chan*N+st->frame_size, st->frame_size); - Sdd += mdf_inner_prod(st->input+chan*st->frame_size, st->input+chan*st->frame_size, st->frame_size); - - /* Convert error to frequency domain */ - spx_fft(st->fft_table, st->e+chan*N, st->E+chan*N); - for (i=0;iframe_size;i++) - st->y[i+chan*N] = 0; - spx_fft(st->fft_table, st->y+chan*N, st->Y+chan*N); - - /* Compute power spectrum of echo (X), error (E) and filter response (Y) */ - power_spectrum_accum(st->E+chan*N, st->Rf, N); - power_spectrum_accum(st->Y+chan*N, st->Yf, N); - - } - - /*printf ("%f %f %f %f\n", Sff, See, Syy, Sdd, st->update_cond);*/ - - /* Do some sanity check */ - if (!(Syy>=0 && Sxx>=0 && See >= 0) -#ifndef FIXED_POINT - || !(Sff < N*1e9 && Syy < N*1e9 && Sxx < N*1e9) -#endif - ) - { - /* Things have gone really bad */ - st->screwed_up += 50; - for (i=0;iframe_size*C;i++) - out[i] = 0; - } else if (SHR32(Sff, 2) > ADD32(Sdd, SHR32(MULT16_16(N, 10000),6))) - { - /* AEC seems to add lots of echo instead of removing it, let's see if it will improve */ - st->screwed_up++; - } else { - /* Everything's fine */ - st->screwed_up=0; - } - if (st->screwed_up>=50) - { - speex_warning("The echo canceller started acting funny and got slapped (reset). It swears it will behave now."); - speex_echo_state_reset(st); - return; - } - - /* Add a small noise floor to make sure not to have problems when dividing */ - See = MAX32(See, SHR32(MULT16_16(N, 100),6)); - - for (speak = 0; speak < K; speak++) - { - Sxx += mdf_inner_prod(st->x+speak*N+st->frame_size, st->x+speak*N+st->frame_size, st->frame_size); - power_spectrum_accum(st->X+speak*N, st->Xf, N); - } - - - /* Smooth far end energy estimate over time */ - for (j=0;j<=st->frame_size;j++) - st->power[j] = MULT16_32_Q15(ss_1,st->power[j]) + 1 + MULT16_32_Q15(ss,st->Xf[j]); - - /* Compute filtered spectra and (cross-)correlations */ - for (j=st->frame_size;j>=0;j--) - { - spx_float_t Eh, Yh; - Eh = PSEUDOFLOAT(st->Rf[j] - st->Eh[j]); - Yh = PSEUDOFLOAT(st->Yf[j] - st->Yh[j]); - Pey = FLOAT_ADD(Pey,FLOAT_MULT(Eh,Yh)); - Pyy = FLOAT_ADD(Pyy,FLOAT_MULT(Yh,Yh)); -#ifdef FIXED_POINT - st->Eh[j] = MAC16_32_Q15(MULT16_32_Q15(SUB16(32767,st->spec_average),st->Eh[j]), st->spec_average, st->Rf[j]); - st->Yh[j] = MAC16_32_Q15(MULT16_32_Q15(SUB16(32767,st->spec_average),st->Yh[j]), st->spec_average, st->Yf[j]); -#else - st->Eh[j] = (1-st->spec_average)*st->Eh[j] + st->spec_average*st->Rf[j]; - st->Yh[j] = (1-st->spec_average)*st->Yh[j] + st->spec_average*st->Yf[j]; -#endif - } - - Pyy = FLOAT_SQRT(Pyy); - Pey = FLOAT_DIVU(Pey,Pyy); - - /* Compute correlation updatete rate */ - tmp32 = MULT16_32_Q15(st->beta0,Syy); - if (tmp32 > MULT16_32_Q15(st->beta_max,See)) - tmp32 = MULT16_32_Q15(st->beta_max,See); - alpha = FLOAT_DIV32(tmp32, See); - alpha_1 = FLOAT_SUB(FLOAT_ONE, alpha); - /* Update correlations (recursive average) */ - st->Pey = FLOAT_ADD(FLOAT_MULT(alpha_1,st->Pey) , FLOAT_MULT(alpha,Pey)); - st->Pyy = FLOAT_ADD(FLOAT_MULT(alpha_1,st->Pyy) , FLOAT_MULT(alpha,Pyy)); - if (FLOAT_LT(st->Pyy, FLOAT_ONE)) - st->Pyy = FLOAT_ONE; - /* We don't really hope to get better than 33 dB (MIN_LEAK-3dB) attenuation anyway */ - if (FLOAT_LT(st->Pey, FLOAT_MULT(MIN_LEAK,st->Pyy))) - st->Pey = FLOAT_MULT(MIN_LEAK,st->Pyy); - if (FLOAT_GT(st->Pey, st->Pyy)) - st->Pey = st->Pyy; - /* leak_estimate is the linear regression result */ - st->leak_estimate = FLOAT_EXTRACT16(FLOAT_SHL(FLOAT_DIVU(st->Pey, st->Pyy),14)); - /* This looks like a stupid bug, but it's right (because we convert from Q14 to Q15) */ - if (st->leak_estimate > 16383) - st->leak_estimate = 32767; - else - st->leak_estimate = SHL16(st->leak_estimate,1); - /*printf ("%f\n", st->leak_estimate);*/ - - /* Compute Residual to Error Ratio */ -#ifdef FIXED_POINT - tmp32 = MULT16_32_Q15(st->leak_estimate,Syy); - tmp32 = ADD32(SHR32(Sxx,13), ADD32(tmp32, SHL32(tmp32,1))); - /* Check for y in e (lower bound on RER) */ - { - spx_float_t bound = PSEUDOFLOAT(Sey); - bound = FLOAT_DIVU(FLOAT_MULT(bound, bound), PSEUDOFLOAT(ADD32(1,Syy))); - if (FLOAT_GT(bound, PSEUDOFLOAT(See))) - tmp32 = See; - else if (tmp32 < FLOAT_EXTRACT32(bound)) - tmp32 = FLOAT_EXTRACT32(bound); - } - if (tmp32 > SHR32(See,1)) - tmp32 = SHR32(See,1); - RER = FLOAT_EXTRACT16(FLOAT_SHL(FLOAT_DIV32(tmp32,See),15)); -#else - RER = (.0001*Sxx + 3.*MULT16_32_Q15(st->leak_estimate,Syy)) / See; - /* Check for y in e (lower bound on RER) */ - if (RER < Sey*Sey/(1+See*Syy)) - RER = Sey*Sey/(1+See*Syy); - if (RER > .5) - RER = .5; -#endif - - /* We consider that the filter has had minimal adaptation if the following is true*/ - if (!st->adapted && st->sum_adapt > SHL32(EXTEND32(M),15) && MULT16_32_Q15(st->leak_estimate,Syy) > MULT16_32_Q15(QCONST16(.03f,15),Syy)) - { - st->adapted = 1; - } - - if (st->adapted) - { - /* Normal learning rate calculation once we're past the minimal adaptation phase */ - for (i=0;i<=st->frame_size;i++) - { - spx_word32_t r, e; - /* Compute frequency-domain adaptation mask */ - r = MULT16_32_Q15(st->leak_estimate,SHL32(st->Yf[i],3)); - e = SHL32(st->Rf[i],3)+1; -#ifdef FIXED_POINT - if (r>SHR32(e,1)) - r = SHR32(e,1); -#else - if (r>.5*e) - r = .5*e; -#endif - r = MULT16_32_Q15(QCONST16(.7,15),r) + MULT16_32_Q15(QCONST16(.3,15),(spx_word32_t)(MULT16_32_Q15(RER,e))); - /*st->power_1[i] = adapt_rate*r/(e*(1+st->power[i]));*/ - st->power_1[i] = FLOAT_SHL(FLOAT_DIV32_FLOAT(r,FLOAT_MUL32U(e,st->power[i]+10)),WEIGHT_SHIFT+16); - } - } else { - /* Temporary adaption rate if filter is not yet adapted enough */ - spx_word16_t adapt_rate=0; - - if (Sxx > SHR32(MULT16_16(N, 1000),6)) - { - tmp32 = MULT16_32_Q15(QCONST16(.25f, 15), Sxx); -#ifdef FIXED_POINT - if (tmp32 > SHR32(See,2)) - tmp32 = SHR32(See,2); -#else - if (tmp32 > .25*See) - tmp32 = .25*See; -#endif - adapt_rate = FLOAT_EXTRACT16(FLOAT_SHL(FLOAT_DIV32(tmp32, See),15)); - } - for (i=0;i<=st->frame_size;i++) - st->power_1[i] = FLOAT_SHL(FLOAT_DIV32(EXTEND32(adapt_rate),ADD32(st->power[i],10)),WEIGHT_SHIFT+1); - - - /* How much have we adapted so far? */ - st->sum_adapt = ADD32(st->sum_adapt,adapt_rate); - } - - /* FIXME: MC conversion required */ - for (i=0;iframe_size;i++) - st->last_y[i] = st->last_y[st->frame_size+i]; - if (st->adapted) - { - /* If the filter is adapted, take the filtered echo */ - for (i=0;iframe_size;i++) - st->last_y[st->frame_size+i] = in[i]-out[i]; - } else { - /* If filter isn't adapted yet, all we can do is take the far end signal directly */ - /* moved earlier: for (i=0;ilast_y[i] = st->x[i];*/ - } - -} - -/* Compute spectrum of estimated echo for use in an echo post-filter */ -void speex_echo_get_residual(SpeexEchoState *st, spx_word32_t *residual_echo, int len) -{ - int i; - spx_word16_t leak2; - int N; - - N = st->window_size; - - /* Apply hanning window (should pre-compute it)*/ - for (i=0;iy[i] = MULT16_16_Q15(st->window[i],st->last_y[i]); - - /* Compute power spectrum of the echo */ - spx_fft(st->fft_table, st->y, st->Y); - power_spectrum(st->Y, residual_echo, N); - -#ifdef FIXED_POINT - if (st->leak_estimate > 16383) - leak2 = 32767; - else - leak2 = SHL16(st->leak_estimate, 1); -#else - if (st->leak_estimate>.5) - leak2 = 1; - else - leak2 = 2*st->leak_estimate; -#endif - /* Estimate residual echo */ - for (i=0;i<=st->frame_size;i++) - residual_echo[i] = (spx_int32_t)MULT16_32_Q15(leak2,residual_echo[i]); - -} - -EXPORT int speex_echo_ctl(SpeexEchoState *st, int request, void *ptr) -{ - switch(request) - { - - case SPEEX_ECHO_GET_FRAME_SIZE: - (*(int*)ptr) = st->frame_size; - break; - case SPEEX_ECHO_SET_SAMPLING_RATE: - st->sampling_rate = (*(int*)ptr); - st->spec_average = DIV32_16(SHL32(EXTEND32(st->frame_size), 15), st->sampling_rate); -#ifdef FIXED_POINT - st->beta0 = DIV32_16(SHL32(EXTEND32(st->frame_size), 16), st->sampling_rate); - st->beta_max = DIV32_16(SHL32(EXTEND32(st->frame_size), 14), st->sampling_rate); -#else - st->beta0 = (2.0f*st->frame_size)/st->sampling_rate; - st->beta_max = (.5f*st->frame_size)/st->sampling_rate; -#endif - if (st->sampling_rate<12000) - st->notch_radius = QCONST16(.9, 15); - else if (st->sampling_rate<24000) - st->notch_radius = QCONST16(.982, 15); - else - st->notch_radius = QCONST16(.992, 15); - break; - case SPEEX_ECHO_GET_SAMPLING_RATE: - (*(int*)ptr) = st->sampling_rate; - break; - case SPEEX_ECHO_GET_IMPULSE_RESPONSE_SIZE: - /*FIXME: Implement this for multiple channels */ - *((spx_int32_t *)ptr) = st->M * st->frame_size; - break; - case SPEEX_ECHO_GET_IMPULSE_RESPONSE: - { - int M = st->M, N = st->window_size, n = st->frame_size, i, j; - spx_int32_t *filt = (spx_int32_t *) ptr; - for(j=0;jwtmp2[i] = EXTRACT16(PSHR32(st->W[j*N+i],16+NORMALIZE_SCALEDOWN)); - spx_ifft(st->fft_table, st->wtmp2, st->wtmp); -#else - spx_ifft(st->fft_table, &st->W[j*N], st->wtmp); -#endif - for(i=0;iwtmp[i]), WEIGHT_SHIFT-NORMALIZE_SCALEDOWN); - } - } - break; - default: - speex_warning_int("Unknown speex_echo_ctl request: ", request); - return -1; - } - return 0; -} diff -Nru speex-1.2~rc1.2/libspeex/misc_bfin.h speex-1.2.0/libspeex/misc_bfin.h --- speex-1.2~rc1.2/libspeex/misc_bfin.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/misc_bfin.h 2015-07-06 15:02:01.000000000 +0000 @@ -33,6 +33,8 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include "bfin.h" + #define OVERRIDE_SPEEX_MOVE void *speex_move (void *dest, void *src, int n) { @@ -48,7 +50,7 @@ "[%1++] = R0;\n\t" : "=a" (src), "=a" (dest) : "a" ((n>>2)-1), "0" (src), "1" (dest) - : "R0", "I0", "L0", "memory" + : "R0", "I0", "L0", "memory" BFIN_HWLOOP0_REGS ); return dest; } diff -Nru speex-1.2~rc1.2/libspeex/modes.c speex-1.2.0/libspeex/modes.c --- speex-1.2~rc1.2/libspeex/modes.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/modes.c 2016-02-11 17:28:03.000000000 +0000 @@ -1,4 +1,4 @@ -/* Copyright (C) 2002-2006 Jean-Marc Valin +/* Copyright (C) 2002-2006 Jean-Marc Valin File: modes.c Describes the different modes of the codec @@ -6,18 +6,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -50,6 +50,33 @@ #define NULL 0 #endif +#ifdef DISABLE_ENCODER +#define nb_encoder_init NULL +#define nb_encoder_destroy NULL +#define nb_encode NULL +#define nb_encoder_ctl NULL + +#define split_cb_search_shape_sign NULL +#define noise_codebook_quant NULL +#define pitch_search_3tap NULL +#define forced_pitch_quant NULL +#define lsp_quant_nb NULL +#define lsp_quant_lbr NULL +#endif /* DISABLE_ENCODER */ + +#ifdef DISABLE_DECODER +#define nb_decoder_init NULL +#define nb_decoder_destroy NULL +#define nb_decode NULL +#define nb_decoder_ctl NULL + +#define noise_codebook_unquant NULL +#define split_cb_shape_sign_unquant NULL +#define lsp_unquant_nb NULL +#define lsp_unquant_lbr NULL +#define pitch_unquant_3tap NULL +#define forced_pitch_unquant NULL +#endif /* DISABLE_DECODER */ /* Extern declarations for all codebooks we use here */ extern const signed char gain_cdbk_nb[]; @@ -269,7 +296,7 @@ split_cb_search_shape_sign, split_cb_shape_sign_unquant, &split_cb_nb, - QCONST16(.3,15), + QCONST16(.25,15), 300 }; @@ -290,7 +317,7 @@ split_cb_search_shape_sign, split_cb_shape_sign_unquant, &split_cb_sb, - QCONST16(.2,15), + QCONST16(.15,15), 364 }; @@ -311,23 +338,20 @@ split_cb_search_shape_sign, split_cb_shape_sign_unquant, &split_cb_nb, - QCONST16(.1,15), + QCONST16(.05,15), 492 }; /* Default mode for narrowband */ static const SpeexNBMode nb_mode = { - 160, /*frameSize*/ - 40, /*subframeSize*/ - 10, /*lpcSize*/ - 17, /*pitchStart*/ - 144, /*pitchEnd*/ -#ifdef FIXED_POINT - 29491, 19661, /* gamma1, gamma2 */ -#else - 0.9, 0.6, /* gamma1, gamma2 */ -#endif + NB_FRAME_SIZE, /*frameSize*/ + NB_SUBFRAME_SIZE, /*subframeSize*/ + NB_ORDER, /*lpcSize*/ + NB_PITCH_START, /*pitchStart*/ + NB_PITCH_END, /*pitchEnd*/ + QCONST16(0.92,15), /* gamma1 */ + QCONST16(0.6,15), /* gamma2 */ QCONST16(.0002,15), /*lpc_floor*/ {NULL, &nb_submode1, &nb_submode2, &nb_submode3, &nb_submode4, &nb_submode5, &nb_submode6, &nb_submode7, &nb_submode8, NULL, NULL, NULL, NULL, NULL, NULL, NULL}, @@ -343,14 +367,14 @@ "narrowband", 0, 4, - &nb_encoder_init, - &nb_encoder_destroy, - &nb_encode, - &nb_decoder_init, - &nb_decoder_destroy, - &nb_decode, - &nb_encoder_ctl, - &nb_decoder_ctl, + nb_encoder_init, + nb_encoder_destroy, + nb_encode, + nb_decoder_init, + nb_decoder_destroy, + nb_decode, + nb_encoder_ctl, + nb_decoder_ctl, }; diff -Nru speex-1.2~rc1.2/libspeex/modes.h speex-1.2.0/libspeex/modes.h --- speex-1.2~rc1.2/libspeex/modes.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/modes.h 2015-07-06 15:01:57.000000000 +0000 @@ -36,8 +36,7 @@ #ifndef MODES_H #define MODES_H -#include -#include +#include "speex/speex.h" #include "arch.h" #define NB_SUBMODES 16 diff -Nru speex-1.2~rc1.2/libspeex/modes_wb.c speex-1.2.0/libspeex/modes_wb.c --- speex-1.2~rc1.2/libspeex/modes_wb.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/modes_wb.c 2015-07-06 15:01:58.000000000 +0000 @@ -1,4 +1,4 @@ -/* Copyright (C) 2002-2007 Jean-Marc Valin +/* Copyright (C) 2002-2007 Jean-Marc Valin File: modes.c Describes the wideband modes of the codec @@ -6,18 +6,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -52,6 +52,28 @@ #define NULL 0 #endif +#if defined(DISABLE_ENCODER) || defined(DISABLE_WIDEBAND) +#define split_cb_search_shape_sign NULL +#define noise_codebook_quant NULL +#define pitch_search_3tap NULL +#define forced_pitch_quant NULL +#define sb_encoder_init NULL +#define sb_encoder_destroy NULL +#define sb_encode NULL +#define sb_encoder_ctl NULL +#define lsp_quant_high NULL +#endif /* DISABLE_ENCODER */ + +#if defined(DISABLE_DECODER) || defined(DISABLE_WIDEBAND) +#define noise_codebook_unquant NULL +#define split_cb_shape_sign_unquant NULL +#define lsp_unquant_high NULL +#define sb_decoder_init NULL +#define sb_decoder_destroy NULL +#define sb_decode NULL +#define sb_decoder_ctl NULL +#endif /* DISABLE_DECODER */ + EXPORT const SpeexMode * const speex_mode_list[SPEEX_NB_MODES] = {&speex_nb_mode, &speex_wb_mode, &speex_uwb_mode}; extern const signed char hexc_table[]; @@ -206,14 +228,14 @@ "wideband (sub-band CELP)", 1, 4, - &sb_encoder_init, - &sb_encoder_destroy, - &sb_encode, - &sb_decoder_init, - &sb_decoder_destroy, - &sb_decode, - &sb_encoder_ctl, - &sb_decoder_ctl, + sb_encoder_init, + sb_encoder_destroy, + sb_encode, + sb_decoder_init, + sb_decoder_destroy, + sb_decode, + sb_encoder_ctl, + sb_decoder_ctl, }; @@ -276,14 +298,14 @@ "ultra-wideband (sub-band CELP)", 2, 4, - &sb_encoder_init, - &sb_encoder_destroy, - &sb_encode, - &sb_decoder_init, - &sb_decoder_destroy, - &sb_decode, - &sb_encoder_ctl, - &sb_decoder_ctl, + sb_encoder_init, + sb_encoder_destroy, + sb_encode, + sb_decoder_init, + sb_decoder_destroy, + sb_decode, + sb_encoder_ctl, + sb_decoder_ctl, }; /* We have defined speex_lib_get_mode() as a macro in speex.h */ diff -Nru speex-1.2~rc1.2/libspeex/nb_celp.c speex-1.2.0/libspeex/nb_celp.c --- speex-1.2~rc1.2/libspeex/nb_celp.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/nb_celp.c 2015-07-23 18:05:56.000000000 +0000 @@ -1,21 +1,21 @@ -/* Copyright (C) 2002-2006 Jean-Marc Valin +/* Copyright (C) 2002-2006 Jean-Marc Valin File: nb_celp.c Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -43,21 +43,15 @@ #include "filters.h" #include "stack_alloc.h" #include "vq.h" -#include #include "vbr.h" #include "arch.h" #include "math_approx.h" #include "os_support.h" -#include #ifdef VORBIS_PSYCHO #include "vorbis_psy.h" #endif -#ifndef M_PI -#define M_PI 3.14159265358979323846 /* pi */ -#endif - #ifndef NULL #define NULL 0 #endif @@ -76,11 +70,11 @@ #ifdef FIXED_POINT -const spx_word32_t ol_gain_table[32]={18900, 25150, 33468, 44536, 59265, 78865, 104946, 139653, 185838, 247297, 329081, 437913, 582736, 775454, 1031906, 1373169, 1827293, 2431601, 3235761, 4305867, 5729870, 7624808, 10146425, 13501971, 17967238, 23909222, 31816294, 42338330, 56340132, 74972501, 99766822, 132760927}; -const spx_word16_t exc_gain_quant_scal3_bound[7]={1841, 3883, 6051, 8062, 10444, 13580, 18560}; -const spx_word16_t exc_gain_quant_scal3[8]={1002, 2680, 5086, 7016, 9108, 11781, 15380, 21740}; -const spx_word16_t exc_gain_quant_scal1_bound[1]={14385}; -const spx_word16_t exc_gain_quant_scal1[2]={11546, 17224}; +static const spx_word32_t ol_gain_table[32]={18900, 25150, 33468, 44536, 59265, 78865, 104946, 139653, 185838, 247297, 329081, 437913, 582736, 775454, 1031906, 1373169, 1827293, 2431601, 3235761, 4305867, 5729870, 7624808, 10146425, 13501971, 17967238, 23909222, 31816294, 42338330, 56340132, 74972501, 99766822, 132760927}; +static const spx_word16_t exc_gain_quant_scal3_bound[7]={1841, 3883, 6051, 8062, 10444, 13580, 18560}; +static const spx_word16_t exc_gain_quant_scal3[8]={1002, 2680, 5086, 7016, 9108, 11781, 15380, 21740}; +static const spx_word16_t exc_gain_quant_scal1_bound[1]={14385}; +static const spx_word16_t exc_gain_quant_scal1[2]={11546, 17224}; #define LSP_MARGIN 16 #define LSP_DELTA1 6553 @@ -88,10 +82,10 @@ #else -const float exc_gain_quant_scal3_bound[7]={0.112338f, 0.236980f, 0.369316f, 0.492054f, 0.637471f, 0.828874f, 1.132784f}; -const float exc_gain_quant_scal3[8]={0.061130f, 0.163546f, 0.310413f, 0.428220f, 0.555887f, 0.719055f, 0.938694f, 1.326874f}; -const float exc_gain_quant_scal1_bound[1]={0.87798f}; -const float exc_gain_quant_scal1[2]={0.70469f, 1.05127f}; +static const float exc_gain_quant_scal3_bound[7]={0.112338f, 0.236980f, 0.369316f, 0.492054f, 0.637471f, 0.828874f, 1.132784f}; +static const float exc_gain_quant_scal3[8]={0.061130f, 0.163546f, 0.310413f, 0.428220f, 0.555887f, 0.719055f, 0.938694f, 1.326874f}; +static const float exc_gain_quant_scal1_bound[1]={0.87798f}; +static const float exc_gain_quant_scal1[2]={0.70469f, 1.05127f}; #define LSP_MARGIN .002f #define LSP_DELTA1 .2f @@ -106,11 +100,10 @@ #endif -#define sqr(x) ((x)*(x)) - extern const spx_word16_t lag_window[]; extern const spx_word16_t lpc_window[]; +#ifndef DISABLE_ENCODER void *nb_encoder_init(const SpeexMode *m) { EncState *st; @@ -126,20 +119,13 @@ #else st->stack = (char*)speex_alloc_scratch(NB_ENC_STACK); #endif - + st->mode=m; - st->frameSize = mode->frameSize; - st->nbSubframes=mode->frameSize/mode->subframeSize; - st->subframeSize=mode->subframeSize; - st->windowSize = st->frameSize+st->subframeSize; - st->lpcSize = mode->lpcSize; st->gamma1=mode->gamma1; st->gamma2=mode->gamma2; - st->min_pitch=mode->pitchStart; - st->max_pitch=mode->pitchEnd; st->lpc_floor = mode->lpc_floor; - + st->submodes=mode->submodes; st->submodeID=st->submodeSelect=mode->defaultSubmode; st->bounded_pitch = 1; @@ -155,39 +141,19 @@ st->cumul_gain = 1024; - /* Allocating input buffer */ - st->winBuf = (spx_word16_t*)speex_alloc((st->windowSize-st->frameSize)*sizeof(spx_word16_t)); - /* Allocating excitation buffer */ - st->excBuf = (spx_word16_t*)speex_alloc((mode->frameSize+mode->pitchEnd+2)*sizeof(spx_word16_t)); - st->exc = st->excBuf + mode->pitchEnd + 2; - st->swBuf = (spx_word16_t*)speex_alloc((mode->frameSize+mode->pitchEnd+2)*sizeof(spx_word16_t)); - st->sw = st->swBuf + mode->pitchEnd + 2; - st->window= lpc_window; - + /* Create the window for autocorrelation (lag-windowing) */ st->lagWindow = lag_window; - st->old_lsp = (spx_lsp_t*)speex_alloc((st->lpcSize)*sizeof(spx_lsp_t)); - st->old_qlsp = (spx_lsp_t*)speex_alloc((st->lpcSize)*sizeof(spx_lsp_t)); st->first = 1; - for (i=0;ilpcSize;i++) - st->old_lsp[i]= DIV32(MULT16_16(QCONST16(3.1415927f, LSP_SHIFT), i+1), st->lpcSize+1); - - st->mem_sp = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t)); - st->mem_sw = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t)); - st->mem_sw_whole = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t)); - st->mem_exc = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t)); - st->mem_exc2 = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t)); + for (i=0;iold_lsp[i]= DIV32(MULT16_16(QCONST16(3.1415927f, LSP_SHIFT), i+1), NB_ORDER+1); - st->pi_gain = (spx_word32_t*)speex_alloc((st->nbSubframes)*sizeof(spx_word32_t)); st->innov_rms_save = NULL; - - st->pitch = (int*)speex_alloc((st->nbSubframes)*sizeof(int)); #ifndef DISABLE_VBR - st->vbr = (VBRState*)speex_alloc(sizeof(VBRState)); - vbr_init(st->vbr); + vbr_init(&st->vbr); st->vbr_quality = 8; st->vbr_enabled = 0; st->vbr_max = 0; @@ -204,7 +170,7 @@ st->sampling_rate=8000; st->isWideband = 0; st->highpass_enabled = 1; - + #ifdef ENABLE_VALGRIND VALGRIND_MAKE_READABLE(st, NB_ENC_STACK); #endif @@ -219,23 +185,8 @@ speex_free_scratch(st->stack); #endif - speex_free (st->winBuf); - speex_free (st->excBuf); - speex_free (st->old_qlsp); - speex_free (st->swBuf); - - speex_free (st->old_lsp); - speex_free (st->mem_sp); - speex_free (st->mem_sw); - speex_free (st->mem_sw_whole); - speex_free (st->mem_exc); - speex_free (st->mem_exc2); - speex_free (st->pi_gain); - speex_free (st->pitch); - #ifndef DISABLE_VBR - vbr_destroy(st->vbr); - speex_free (st->vbr); + vbr_destroy(&st->vbr); #endif /* #ifndef DISABLE_VBR */ #ifdef VORBIS_PSYCHO @@ -249,6 +200,212 @@ speex_free(st); } + +int nb_encoder_ctl(void *state, int request, void *ptr) +{ + EncState *st; + st=(EncState*)state; + switch(request) + { + case SPEEX_GET_FRAME_SIZE: + (*(spx_int32_t*)ptr) = NB_FRAME_SIZE; + break; + case SPEEX_SET_LOW_MODE: + case SPEEX_SET_MODE: + st->submodeSelect = st->submodeID = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_LOW_MODE: + case SPEEX_GET_MODE: + (*(spx_int32_t*)ptr) = st->submodeID; + break; +#ifndef DISABLE_VBR + case SPEEX_SET_VBR: + st->vbr_enabled = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_VBR: + (*(spx_int32_t*)ptr) = st->vbr_enabled; + break; + case SPEEX_SET_VAD: + st->vad_enabled = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_VAD: + (*(spx_int32_t*)ptr) = st->vad_enabled; + break; + case SPEEX_SET_DTX: + st->dtx_enabled = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_DTX: + (*(spx_int32_t*)ptr) = st->dtx_enabled; + break; + case SPEEX_SET_ABR: + st->abr_enabled = (*(spx_int32_t*)ptr); + st->vbr_enabled = st->abr_enabled!=0; + if (st->vbr_enabled) + { + spx_int32_t i=10; + spx_int32_t rate, target; + float vbr_qual; + target = (*(spx_int32_t*)ptr); + while (i>=0) + { + speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i); + speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate); + if (rate <= target) + break; + i--; + } + vbr_qual=i; + if (vbr_qual<0) + vbr_qual=0; + speex_encoder_ctl(st, SPEEX_SET_VBR_QUALITY, &vbr_qual); + st->abr_count=0; + st->abr_drift=0; + st->abr_drift2=0; + } + + break; + case SPEEX_GET_ABR: + (*(spx_int32_t*)ptr) = st->abr_enabled; + break; +#endif /* #ifndef DISABLE_VBR */ +#if !defined(DISABLE_VBR) && !defined(DISABLE_FLOAT_API) + case SPEEX_SET_VBR_QUALITY: + st->vbr_quality = (*(float*)ptr); + break; + case SPEEX_GET_VBR_QUALITY: + (*(float*)ptr) = st->vbr_quality; + break; +#endif /* !defined(DISABLE_VBR) && !defined(DISABLE_FLOAT_API) */ + case SPEEX_SET_QUALITY: + { + int quality = (*(spx_int32_t*)ptr); + if (quality < 0) + quality = 0; + if (quality > 10) + quality = 10; + st->submodeSelect = st->submodeID = ((const SpeexNBMode*)(st->mode->mode))->quality_map[quality]; + } + break; + case SPEEX_SET_COMPLEXITY: + st->complexity = (*(spx_int32_t*)ptr); + if (st->complexity<0) + st->complexity=0; + break; + case SPEEX_GET_COMPLEXITY: + (*(spx_int32_t*)ptr) = st->complexity; + break; + case SPEEX_SET_BITRATE: + { + spx_int32_t i=10; + spx_int32_t rate, target; + target = (*(spx_int32_t*)ptr); + while (i>=0) + { + speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i); + speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate); + if (rate <= target) + break; + i--; + } + } + break; + case SPEEX_GET_BITRATE: + if (st->submodes[st->submodeID]) + (*(spx_int32_t*)ptr) = st->sampling_rate*SUBMODE(bits_per_frame)/NB_FRAME_SIZE; + else + (*(spx_int32_t*)ptr) = st->sampling_rate*(NB_SUBMODE_BITS+1)/NB_FRAME_SIZE; + break; + case SPEEX_SET_SAMPLING_RATE: + st->sampling_rate = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_SAMPLING_RATE: + (*(spx_int32_t*)ptr)=st->sampling_rate; + break; + case SPEEX_RESET_STATE: + { + int i; + st->bounded_pitch = 1; + st->first = 1; + for (i=0;iold_lsp[i]= DIV32(MULT16_16(QCONST16(3.1415927f, LSP_SHIFT), i+1), NB_ORDER+1); + for (i=0;imem_sw[i]=st->mem_sw_whole[i]=st->mem_sp[i]=st->mem_exc[i]=0; + for (i=0;iexcBuf[i]=st->swBuf[i]=0; + for (i=0;iwinBuf[i]=0; + } + break; + case SPEEX_SET_SUBMODE_ENCODING: + st->encode_submode = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_SUBMODE_ENCODING: + (*(spx_int32_t*)ptr) = st->encode_submode; + break; + case SPEEX_GET_LOOKAHEAD: + (*(spx_int32_t*)ptr)=(NB_WINDOW_SIZE-NB_FRAME_SIZE); + break; + case SPEEX_SET_PLC_TUNING: + st->plc_tuning = (*(spx_int32_t*)ptr); + if (st->plc_tuning>100) + st->plc_tuning=100; + break; + case SPEEX_GET_PLC_TUNING: + (*(spx_int32_t*)ptr)=(st->plc_tuning); + break; +#ifndef DISABLE_VBR + case SPEEX_SET_VBR_MAX_BITRATE: + st->vbr_max = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_VBR_MAX_BITRATE: + (*(spx_int32_t*)ptr) = st->vbr_max; + break; +#endif /* #ifndef DISABLE_VBR */ + case SPEEX_SET_HIGHPASS: + st->highpass_enabled = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_HIGHPASS: + (*(spx_int32_t*)ptr) = st->highpass_enabled; + break; + + /* This is all internal stuff past this point */ + case SPEEX_GET_PI_GAIN: + { + int i; + spx_word32_t *g = (spx_word32_t*)ptr; + for (i=0;ipi_gain[i]; + } + break; + case SPEEX_GET_EXC: + { + int i; + for (i=0;iexc+i*NB_SUBFRAME_SIZE, NB_SUBFRAME_SIZE); + } + break; +#ifndef DISABLE_VBR + case SPEEX_GET_RELATIVE_QUALITY: + (*(float*)ptr)=st->relative_quality; + break; +#endif /* #ifndef DISABLE_VBR */ + case SPEEX_SET_INNOVATION_SAVE: + st->innov_rms_save = (spx_word16_t*)ptr; + break; + case SPEEX_SET_WIDEBAND: + st->isWideband = *((spx_int32_t*)ptr); + break; + case SPEEX_GET_STACK: + *((char**)ptr) = st->stack; + break; + default: + speex_warning_int("Unknown nb_ctl request: ", request); + return -1; + } + return 0; +} + + int nb_encode(void *state, void *vin, SpeexBits *bits) { EncState *st; @@ -256,7 +413,6 @@ int ol_pitch; spx_word16_t ol_pitch_coef; spx_word32_t ol_gain; - VARDECL(spx_word16_t *ringing); VARDECL(spx_word16_t *target); VARDECL(spx_sig_t *innov); VARDECL(spx_word32_t *exc32); @@ -272,8 +428,7 @@ VARDECL(spx_coef_t *interp_qlpc); char *stack; VARDECL(spx_word16_t *syn_resp); - VARDECL(spx_word16_t *real_exc); - + spx_word32_t ener=0; spx_word16_t fine_gain; spx_word16_t *in = (spx_word16_t*)vin; @@ -281,50 +436,53 @@ st=(EncState *)state; stack=st->stack; - ALLOC(lpc, st->lpcSize, spx_coef_t); - ALLOC(bw_lpc1, st->lpcSize, spx_coef_t); - ALLOC(bw_lpc2, st->lpcSize, spx_coef_t); - ALLOC(lsp, st->lpcSize, spx_lsp_t); - ALLOC(qlsp, st->lpcSize, spx_lsp_t); - ALLOC(interp_lsp, st->lpcSize, spx_lsp_t); - ALLOC(interp_qlsp, st->lpcSize, spx_lsp_t); - ALLOC(interp_lpc, st->lpcSize, spx_coef_t); - ALLOC(interp_qlpc, st->lpcSize, spx_coef_t); + ALLOC(lpc, NB_ORDER, spx_coef_t); + ALLOC(bw_lpc1, NB_ORDER, spx_coef_t); + ALLOC(bw_lpc2, NB_ORDER, spx_coef_t); + ALLOC(lsp, NB_ORDER, spx_lsp_t); + ALLOC(qlsp, NB_ORDER, spx_lsp_t); + ALLOC(interp_lsp, NB_ORDER, spx_lsp_t); + ALLOC(interp_qlsp, NB_ORDER, spx_lsp_t); + ALLOC(interp_lpc, NB_ORDER, spx_coef_t); + ALLOC(interp_qlpc, NB_ORDER, spx_coef_t); + st->exc = st->excBuf + NB_PITCH_END + 2; + st->sw = st->swBuf + NB_PITCH_END + 2; /* Move signals 1 frame towards the past */ - SPEEX_MOVE(st->excBuf, st->excBuf+st->frameSize, st->max_pitch+2); - SPEEX_MOVE(st->swBuf, st->swBuf+st->frameSize, st->max_pitch+2); + SPEEX_MOVE(st->excBuf, st->excBuf+NB_FRAME_SIZE, NB_PITCH_END+2); + SPEEX_MOVE(st->swBuf, st->swBuf+NB_FRAME_SIZE, NB_PITCH_END+2); if (st->highpass_enabled) - highpass(in, in, st->frameSize, (st->isWideband?HIGHPASS_WIDEBAND:HIGHPASS_NARROWBAND)|HIGHPASS_INPUT, st->mem_hp); - + highpass(in, in, NB_FRAME_SIZE, (st->isWideband?HIGHPASS_WIDEBAND:HIGHPASS_NARROWBAND)|HIGHPASS_INPUT, st->mem_hp); + { VARDECL(spx_word16_t *w_sig); VARDECL(spx_word16_t *autocorr); - ALLOC(w_sig, st->windowSize, spx_word16_t); - ALLOC(autocorr, st->lpcSize+1, spx_word16_t); + ALLOC(w_sig, NB_WINDOW_SIZE, spx_word16_t); + ALLOC(autocorr, NB_ORDER+1, spx_word16_t); /* Window for analysis */ - for (i=0;iwindowSize-st->frameSize;i++) - w_sig[i] = EXTRACT16(SHR32(MULT16_16(st->winBuf[i],st->window[i]),SIG_SHIFT)); - for (;iwindowSize;i++) - w_sig[i] = EXTRACT16(SHR32(MULT16_16(in[i-st->windowSize+st->frameSize],st->window[i]),SIG_SHIFT)); + for (i=0;iwinBuf[i],st->window[i]); + for (;iwindow[i]); /* Compute auto-correlation */ - _spx_autocorr(w_sig, autocorr, st->lpcSize+1, st->windowSize); + _spx_autocorr(w_sig, autocorr, NB_ORDER+1, NB_WINDOW_SIZE); autocorr[0] = ADD16(autocorr[0],MULT16_16_Q15(autocorr[0],st->lpc_floor)); /* Noise floor in auto-correlation domain */ /* Lag windowing: equivalent to filtering in the power-spectrum domain */ - for (i=0;ilpcSize+1;i++) - autocorr[i] = MULT16_16_Q14(autocorr[i],st->lagWindow[i]); + for (i=0;ilagWindow[i]); + autocorr[0] = ADD16(autocorr[0],1); /* Levinson-Durbin */ - _spx_lpc(lpc, autocorr, st->lpcSize); + _spx_lpc(lpc, autocorr, NB_ORDER); /* LPC to LSPs (x-domain) transform */ - roots=lpc_to_lsp (lpc, st->lpcSize, lsp, 10, LSP_DELTA1, stack); + roots=lpc_to_lsp (lpc, NB_ORDER, lsp, 10, LSP_DELTA1, stack); /* Check if we found all the roots */ - if (roots!=st->lpcSize) + if (roots!=NB_ORDER) { /*If we can't find all LSP's, do some damage control and use previous filter*/ - for (i=0;ilpcSize;i++) + for (i=0;iold_lsp[i]; } @@ -336,21 +494,19 @@ /* Whole frame analysis (open-loop estimation of pitch and excitation gain) */ { - int diff = st->windowSize-st->frameSize; + int diff = NB_WINDOW_SIZE-NB_FRAME_SIZE; if (st->first) - for (i=0;ilpcSize;i++) + for (i=0;iold_lsp, lsp, interp_lsp, st->lpcSize, st->nbSubframes, st->nbSubframes<<1); - - lsp_enforce_margin(interp_lsp, st->lpcSize, LSP_MARGIN); + lsp_interpolate(st->old_lsp, lsp, interp_lsp, NB_ORDER, NB_NB_SUBFRAMES, NB_NB_SUBFRAMES<<1, LSP_MARGIN); /* Compute interpolated LPCs (unquantized) for whole frame*/ - lsp_to_lpc(interp_lsp, interp_lpc, st->lpcSize,stack); + lsp_to_lpc(interp_lsp, interp_lpc, NB_ORDER,stack); /*Open-loop pitch*/ - if (!st->submodes[st->submodeID] || (st->complexity>2 && SUBMODE(have_subframe_gain)<3) || SUBMODE(forced_pitch_gain) || SUBMODE(lbr_pitch) != -1 + if (!st->submodes[st->submodeID] || (st->complexity>2 && SUBMODE(have_subframe_gain)<3) || SUBMODE(forced_pitch_gain) || SUBMODE(lbr_pitch) != -1 #ifndef DISABLE_VBR || st->vbr_enabled || st->vad_enabled #endif @@ -358,15 +514,15 @@ { int nol_pitch[6]; spx_word16_t nol_pitch_coef[6]; - - bw_lpc(st->gamma1, interp_lpc, bw_lpc1, st->lpcSize); - bw_lpc(st->gamma2, interp_lpc, bw_lpc2, st->lpcSize); + + bw_lpc(0.9, interp_lpc, bw_lpc1, NB_ORDER); + bw_lpc(0.55, interp_lpc, bw_lpc2, NB_ORDER); SPEEX_COPY(st->sw, st->winBuf, diff); - SPEEX_COPY(st->sw+diff, in, st->frameSize-diff); - filter_mem16(st->sw, bw_lpc1, bw_lpc2, st->sw, st->frameSize, st->lpcSize, st->mem_sw_whole, stack); + SPEEX_COPY(st->sw+diff, in, NB_FRAME_SIZE-diff); + filter10(st->sw, bw_lpc1, bw_lpc2, st->sw, NB_FRAME_SIZE, st->mem_sw_whole, stack); - open_loop_nbest_pitch(st->sw, st->min_pitch, st->max_pitch, st->frameSize, + open_loop_nbest_pitch(st->sw, NB_PITCH_START, NB_PITCH_END, NB_FRAME_SIZE, nol_pitch, nol_pitch_coef, 6, stack); ol_pitch=nol_pitch[0]; ol_pitch_coef = nol_pitch_coef[0]; @@ -374,11 +530,11 @@ for (i=1;i<6;i++) { #ifdef FIXED_POINT - if ((nol_pitch_coef[i]>MULT16_16_Q15(nol_pitch_coef[0],27853)) && + if ((nol_pitch_coef[i]>MULT16_16_Q15(nol_pitch_coef[0],27853)) && #else - if ((nol_pitch_coef[i]>.85*nol_pitch_coef[0]) && + if ((nol_pitch_coef[i]>.85*nol_pitch_coef[0]) && #endif - (ABS(2*nol_pitch[i]-ol_pitch)<=2 || ABS(3*nol_pitch[i]-ol_pitch)<=3 || + (ABS(2*nol_pitch[i]-ol_pitch)<=2 || ABS(3*nol_pitch[i]-ol_pitch)<=3 || ABS(4*nol_pitch[i]-ol_pitch)<=4 || ABS(5*nol_pitch[i]-ol_pitch)<=5)) { /*ol_pitch_coef=nol_pitch_coef[i];*/ @@ -393,15 +549,16 @@ ol_pitch=0; ol_pitch_coef=0; } - + /*Compute "real" excitation*/ - SPEEX_COPY(st->exc, st->winBuf, diff); - SPEEX_COPY(st->exc+diff, in, st->frameSize-diff); - fir_mem16(st->exc, interp_lpc, st->exc, st->frameSize, st->lpcSize, st->mem_exc, stack); + /*SPEEX_COPY(st->exc, st->winBuf, diff); + SPEEX_COPY(st->exc+diff, in, NB_FRAME_SIZE-diff);*/ + fir_mem16(st->winBuf, interp_lpc, st->exc, diff, NB_ORDER, st->mem_exc, stack); + fir_mem16(in, interp_lpc, st->exc+diff, NB_FRAME_SIZE-diff, NB_ORDER, st->mem_exc, stack); /* Compute open-loop excitation gain */ { - spx_word16_t g = compute_rms16(st->exc, st->frameSize); + spx_word16_t g = compute_rms16(st->exc, NB_FRAME_SIZE); if (st->submodeID!=1 && ol_pitch>0) ol_gain = MULT16_16(g, MULT16_16_Q14(QCONST16(1.1,14), spx_sqrt(QCONST32(1.,28)-MULT16_32_Q15(QCONST16(.8,15),SHL32(MULT16_16(ol_pitch_coef,ol_pitch_coef),16))))); @@ -411,8 +568,8 @@ } #ifdef VORBIS_PSYCHO - SPEEX_MOVE(st->psy_window, st->psy_window+st->frameSize, 256-st->frameSize); - SPEEX_COPY(&st->psy_window[256-st->frameSize], in, st->frameSize); + SPEEX_MOVE(st->psy_window, st->psy_window+NB_FRAME_SIZE, 256-NB_FRAME_SIZE); + SPEEX_COPY(&st->psy_window[256-NB_FRAME_SIZE], in, NB_FRAME_SIZE); compute_curve(st->psy, st->psy_window, st->curve); /*print_vec(st->curve, 128, "curve");*/ if (st->first) @@ -421,13 +578,13 @@ /*VBR stuff*/ #ifndef DISABLE_VBR - if (st->vbr && (st->vbr_enabled||st->vad_enabled)) + if (st->vbr_enabled||st->vad_enabled) { float lsp_dist=0; - for (i=0;ilpcSize;i++) + for (i=0;iold_lsp[i] - lsp[i])*(st->old_lsp[i] - lsp[i]); lsp_dist /= LSP_SCALING*LSP_SCALING; - + if (st->abr_enabled) { float qual_change=0; @@ -447,10 +604,10 @@ st->vbr_quality=0; } - st->relative_quality = vbr_analysis(st->vbr, in, st->frameSize, ol_pitch, GAIN_SCALING_1*ol_pitch_coef); + st->relative_quality = vbr_analysis(&st->vbr, in, NB_FRAME_SIZE, ol_pitch, GAIN_SCALING_1*ol_pitch_coef); /*if (delta_qual<0)*/ /* delta_qual*=.1*(3+st->vbr_quality);*/ - if (st->vbr_enabled) + if (st->vbr_enabled) { spx_int32_t mode; int choice=0; @@ -465,7 +622,7 @@ thresh = vbr_nb_thresh[mode][v1]; else thresh = (st->vbr_quality-v1)*vbr_nb_thresh[mode][v1+1] + (1+v1-st->vbr_quality)*vbr_nb_thresh[mode][v1]; - if (st->relative_quality > thresh && + if (st->relative_quality > thresh && st->relative_quality-threshabr_enabled) { spx_int32_t bitrate; @@ -528,7 +685,7 @@ } /*speex_encoder_ctl(state, SPEEX_SET_MODE, &mode);*/ st->submodeID=mode; - } + } } else { st->relative_quality = -1; } @@ -547,18 +704,18 @@ /* If null mode (no transmission), just set a couple things to zero*/ if (st->submodes[st->submodeID] == NULL) { - for (i=0;iframeSize;i++) + for (i=0;iexc[i]=st->sw[i]=VERY_SMALL; - for (i=0;ilpcSize;i++) + for (i=0;imem_sw[i]=0; st->first=1; st->bounded_pitch = 1; - SPEEX_COPY(st->winBuf, in+2*st->frameSize-st->windowSize, st->windowSize-st->frameSize); + SPEEX_COPY(st->winBuf, in+2*NB_FRAME_SIZE-NB_WINDOW_SIZE, NB_WINDOW_SIZE-NB_FRAME_SIZE); /* Clear memory (no need to really compute it) */ - for (i=0;ilpcSize;i++) + for (i=0;imem_sp[i] = 0; return 0; @@ -567,24 +724,24 @@ /* LSP Quantization */ if (st->first) { - for (i=0;ilpcSize;i++) + for (i=0;iold_lsp[i] = lsp[i]; } /*Quantize LSPs*/ #if 1 /*0 for unquantized*/ - SUBMODE(lsp_quant)(lsp, qlsp, st->lpcSize, bits); + SUBMODE(lsp_quant)(lsp, qlsp, NB_ORDER, bits); #else - for (i=0;ilpcSize;i++) + for (i=0;imin_pitch, 7); - } + speex_bits_pack(bits, ol_pitch-NB_PITCH_START, 7); + } if (SUBMODE(forced_pitch_gain)) { @@ -603,8 +760,8 @@ speex_bits_pack(bits, quant, 4); ol_pitch_coef=MULT16_16_P15(QCONST16(0.066667,15),SHL16(quant,GAIN_SHIFT)); } - - + + /*Quantize and transmit open-loop excitation gain*/ #ifdef FIXED_POINT { @@ -630,52 +787,46 @@ /* Special case for first frame */ if (st->first) { - for (i=0;ilpcSize;i++) + for (i=0;iold_qlsp[i] = qlsp[i]; } /* Target signal */ - ALLOC(target, st->subframeSize, spx_word16_t); - ALLOC(innov, st->subframeSize, spx_sig_t); - ALLOC(exc32, st->subframeSize, spx_word32_t); - ALLOC(ringing, st->subframeSize, spx_word16_t); - ALLOC(syn_resp, st->subframeSize, spx_word16_t); - ALLOC(real_exc, st->subframeSize, spx_word16_t); - ALLOC(mem, st->lpcSize, spx_mem_t); + ALLOC(target, NB_SUBFRAME_SIZE, spx_word16_t); + ALLOC(innov, NB_SUBFRAME_SIZE, spx_sig_t); + ALLOC(exc32, NB_SUBFRAME_SIZE, spx_word32_t); + ALLOC(syn_resp, NB_SUBFRAME_SIZE, spx_word16_t); + ALLOC(mem, NB_ORDER, spx_mem_t); /* Loop on sub-frames */ - for (sub=0;subnbSubframes;sub++) + for (sub=0;subsubframeSize; + int response_bound = NB_SUBFRAME_SIZE; /* Offset relative to start of frame */ - offset = st->subframeSize*sub; + offset = NB_SUBFRAME_SIZE*sub; /* Excitation */ exc=st->exc+offset; /* Weighted signal */ sw=st->sw+offset; - - /* LSP interpolation (quantized and unquantized) */ - lsp_interpolate(st->old_lsp, lsp, interp_lsp, st->lpcSize, sub, st->nbSubframes); - lsp_interpolate(st->old_qlsp, qlsp, interp_qlsp, st->lpcSize, sub, st->nbSubframes); - /* Make sure the filters are stable */ - lsp_enforce_margin(interp_lsp, st->lpcSize, LSP_MARGIN); - lsp_enforce_margin(interp_qlsp, st->lpcSize, LSP_MARGIN); + /* LSP interpolation (quantized and unquantized) */ + lsp_interpolate(st->old_lsp, lsp, interp_lsp, NB_ORDER, sub, NB_NB_SUBFRAMES, LSP_MARGIN); + lsp_interpolate(st->old_qlsp, qlsp, interp_qlsp, NB_ORDER, sub, NB_NB_SUBFRAMES, LSP_MARGIN); /* Compute interpolated LPCs (quantized and unquantized) */ - lsp_to_lpc(interp_lsp, interp_lpc, st->lpcSize,stack); + lsp_to_lpc(interp_lsp, interp_lpc, NB_ORDER,stack); - lsp_to_lpc(interp_qlsp, interp_qlpc, st->lpcSize, stack); + lsp_to_lpc(interp_qlsp, interp_qlpc, NB_ORDER, stack); /* Compute analysis filter gain at w=pi (for use in SB-CELP) */ { spx_word32_t pi_g=LPC_SCALING; - for (i=0;ilpcSize;i+=2) + for (i=0;iinterp_qlpc[i] + st->interp_qlpc[i+1];*/ pi_g = ADD32(pi_g, SUB32(EXTEND32(interp_qlpc[i+1]),EXTEND32(interp_qlpc[i]))); @@ -686,76 +837,67 @@ #ifdef VORBIS_PSYCHO { float curr_curve[128]; - float fact = ((float)sub+1.0f)/st->nbSubframes; + float fact = ((float)sub+1.0f)/NB_NB_SUBFRAMES; for (i=0;i<128;i++) curr_curve[i] = (1.0f-fact)*st->old_curve[i] + fact*st->curve[i]; curve_to_lpc(st->psy, curr_curve, bw_lpc1, bw_lpc2, 10); } #else /* Compute bandwidth-expanded (unquantized) LPCs for perceptual weighting */ - bw_lpc(st->gamma1, interp_lpc, bw_lpc1, st->lpcSize); - if (st->gamma2>=0) - bw_lpc(st->gamma2, interp_lpc, bw_lpc2, st->lpcSize); - else - { - for (i=0;ilpcSize;i++) - bw_lpc2[i]=0; - } + bw_lpc(st->gamma1, interp_lpc, bw_lpc1, NB_ORDER); + bw_lpc(st->gamma2, interp_lpc, bw_lpc2, NB_ORDER); /*print_vec(st->bw_lpc1, 10, "bw_lpc");*/ #endif /*FIXME: This will break if we change the window size */ - speex_assert(st->windowSize-st->frameSize == st->subframeSize); + speex_assert(NB_WINDOW_SIZE-NB_FRAME_SIZE == NB_SUBFRAME_SIZE); if (sub==0) - { - for (i=0;isubframeSize;i++) - real_exc[i] = sw[i] = st->winBuf[i]; - } else { - for (i=0;isubframeSize;i++) - real_exc[i] = sw[i] = in[i+((sub-1)*st->subframeSize)]; - } - fir_mem16(real_exc, interp_qlpc, real_exc, st->subframeSize, st->lpcSize, st->mem_exc2, stack); - + inBuf = st->winBuf; + else + inBuf = &in[((sub-1)*NB_SUBFRAME_SIZE)]; + for (i=0;icomplexity==0) response_bound >>= 1; - compute_impulse_response(interp_qlpc, bw_lpc1, bw_lpc2, syn_resp, response_bound, st->lpcSize, stack); - for (i=response_bound;isubframeSize;i++) + compute_impulse_response(interp_qlpc, bw_lpc1, bw_lpc2, syn_resp, response_bound, NB_ORDER, stack); + for (i=response_bound;ilpcSize;i++) + for (i=0;imem_sp[i],1); - for (i=0;isubframeSize;i++) - ringing[i] = VERY_SMALL; + for (i=0;ilpcSize, mem, stack); - for (i=0;ilpcSize;i++) + iir_mem16(exc, interp_qlpc, exc, response_bound, NB_ORDER, mem, stack); + for (i=0;imem_sw[i],1); - filter_mem16(ringing, st->bw_lpc1, st->bw_lpc2, ringing, response_bound, st->lpcSize, mem, stack); - SPEEX_MEMSET(&ringing[response_bound], 0, st->subframeSize-response_bound); + filter10(exc, st->bw_lpc1, st->bw_lpc2, exc, response_bound, mem, stack); + SPEEX_MEMSET(&exc[response_bound], 0, NB_SUBFRAME_SIZE-response_bound); #else - iir_mem16(ringing, interp_qlpc, ringing, st->subframeSize, st->lpcSize, mem, stack); - for (i=0;ilpcSize;i++) + iir_mem16(exc, interp_qlpc, exc, NB_SUBFRAME_SIZE, NB_ORDER, mem, stack); + for (i=0;imem_sw[i],1); - filter_mem16(ringing, bw_lpc1, bw_lpc2, ringing, st->subframeSize, st->lpcSize, mem, stack); + filter10(exc, bw_lpc1, bw_lpc2, exc, NB_SUBFRAME_SIZE, mem, stack); #endif - + /* Compute weighted signal */ - for (i=0;ilpcSize;i++) + for (i=0;imem_sw[i]; - filter_mem16(sw, bw_lpc1, bw_lpc2, sw, st->subframeSize, st->lpcSize, mem, stack); - + filter10(sw, bw_lpc1, bw_lpc2, sw, NB_SUBFRAME_SIZE, mem, stack); + if (st->complexity==0) - for (i=0;ilpcSize;i++) + for (i=0;imem_sw[i]=mem[i]; - - /* Compute target signal (saturation prevents overflows on clipped input speech) */ - for (i=0;isubframeSize;i++) - target[i]=EXTRACT16(SATURATE(SUB32(sw[i],PSHR32(ringing[i],1)),32767)); - /* Reset excitation */ - SPEEX_MEMSET(exc, 0, st->subframeSize); + /* Compute target signal (saturation prevents overflows on clipped input speech) */ + for (i=0;imem_exc2, stack); /* If we have a long-term predictor (otherwise, something's wrong) */ speex_assert (SUBMODE(ltp_quant)); { @@ -768,20 +910,20 @@ margin = SUBMODE(lbr_pitch); if (margin) { - if (ol_pitch < st->min_pitch+margin-1) - ol_pitch=st->min_pitch+margin-1; - if (ol_pitch > st->max_pitch-margin) - ol_pitch=st->max_pitch-margin; + if (ol_pitch < NB_PITCH_START+margin-1) + ol_pitch=NB_PITCH_START+margin-1; + if (ol_pitch > NB_PITCH_END-margin) + ol_pitch=NB_PITCH_END-margin; pit_min = ol_pitch-margin+1; pit_max = ol_pitch+margin; } else { pit_min=pit_max=ol_pitch; } } else { - pit_min = st->min_pitch; - pit_max = st->max_pitch; + pit_min = NB_PITCH_START; + pit_max = NB_PITCH_END; } - + /* Force pitch to use only the current frame if needed */ if (st->bounded_pitch && pit_max>offset) pit_max=offset; @@ -789,20 +931,20 @@ /* Perform pitch search */ pitch = SUBMODE(ltp_quant)(target, sw, interp_qlpc, bw_lpc1, bw_lpc2, exc32, SUBMODE(ltp_params), pit_min, pit_max, ol_pitch_coef, - st->lpcSize, st->subframeSize, bits, stack, + NB_ORDER, NB_SUBFRAME_SIZE, bits, stack, exc, syn_resp, st->complexity, 0, st->plc_tuning, &st->cumul_gain); st->pitch[sub]=pitch; } /* Quantization of innovation */ - SPEEX_MEMSET(innov, 0, st->subframeSize); - - /* FIXME: Make sure this is save from overflows (so far so good) */ - for (i=0;isubframeSize;i++) - real_exc[i] = EXTRACT16(SUB32(EXTEND32(real_exc[i]), PSHR32(exc32[i],SIG_SHIFT-1))); - - ener = SHL32(EXTEND32(compute_rms16(real_exc, st->subframeSize)),SIG_SHIFT); - + SPEEX_MEMSET(innov, 0, NB_SUBFRAME_SIZE); + + /* FIXME: Make sure this is safe from overflows (so far so good) */ + for (i=0;isubframeSize); - + signal_div(target, target, ener, NB_SUBFRAME_SIZE); + /* Quantize innovation */ speex_assert (SUBMODE(innovation_quant)); { /* Codebook search */ - SUBMODE(innovation_quant)(target, interp_qlpc, bw_lpc1, bw_lpc2, - SUBMODE(innovation_params), st->lpcSize, st->subframeSize, + SUBMODE(innovation_quant)(target, interp_qlpc, bw_lpc1, bw_lpc2, + SUBMODE(innovation_params), NB_ORDER, NB_SUBFRAME_SIZE, innov, syn_resp, bits, stack, st->complexity, SUBMODE(double_codebook)); - + /* De-normalize innovation and update excitation */ - signal_mul(innov, innov, ener, st->subframeSize); - - for (i=0;isubframeSize;i++) - exc[i] = EXTRACT16(SATURATE32(PSHR32(ADD32(SHL32(exc32[i],1),innov[i]),SIG_SHIFT),32767)); + signal_mul(innov, innov, ener, NB_SUBFRAME_SIZE); /* In some (rare) modes, we do a second search (more bits) to reduce noise even more */ if (SUBMODE(double_codebook)) { char *tmp_stack=stack; VARDECL(spx_sig_t *innov2); - ALLOC(innov2, st->subframeSize, spx_sig_t); - SPEEX_MEMSET(innov2, 0, st->subframeSize); - for (i=0;isubframeSize;i++) + ALLOC(innov2, NB_SUBFRAME_SIZE, spx_sig_t); + SPEEX_MEMSET(innov2, 0, NB_SUBFRAME_SIZE); + for (i=0;ilpcSize, st->subframeSize, + SUBMODE(innovation_quant)(target, interp_qlpc, bw_lpc1, bw_lpc2, + SUBMODE(innovation_params), NB_ORDER, NB_SUBFRAME_SIZE, innov2, syn_resp, bits, stack, st->complexity, 0); - signal_mul(innov2, innov2, MULT16_32_Q15(QCONST16(0.454545f,15),ener), st->subframeSize); - for (i=0;isubframeSize;i++) + signal_mul(innov2, innov2, MULT16_32_Q15(QCONST16(0.454545f,15),ener), NB_SUBFRAME_SIZE); + for (i=0;isubframeSize;i++) + for (i=0;iinnov_rms_save) - { - st->innov_rms_save[sub] = compute_rms(innov, st->subframeSize); - } + st->innov_rms_save[sub] = compute_rms(innov, NB_SUBFRAME_SIZE); } /* Final signal synthesis from excitation */ - iir_mem16(exc, interp_qlpc, sw, st->subframeSize, st->lpcSize, st->mem_sp, stack); + iir_mem16(exc, interp_qlpc, sw, NB_SUBFRAME_SIZE, NB_ORDER, st->mem_sp, stack); /* Compute weighted signal again, from synthesized speech (not sure it's the right thing) */ if (st->complexity!=0) - filter_mem16(sw, bw_lpc1, bw_lpc2, sw, st->subframeSize, st->lpcSize, st->mem_sw, stack); - + filter10(sw, bw_lpc1, bw_lpc2, sw, NB_SUBFRAME_SIZE, st->mem_sw, stack); + } /* Store the LSPs for interpolation in the next frame */ if (st->submodeID>=1) { - for (i=0;ilpcSize;i++) + for (i=0;iold_lsp[i] = lsp[i]; - for (i=0;ilpcSize;i++) + for (i=0;iold_qlsp[i] = qlsp[i]; } @@ -911,7 +1048,7 @@ /* The next frame will not be the first (Duh!) */ st->first = 0; - SPEEX_COPY(st->winBuf, in+2*st->frameSize-st->windowSize, st->windowSize-st->frameSize); + SPEEX_COPY(st->winBuf, in+2*NB_FRAME_SIZE-NB_WINDOW_SIZE, NB_WINDOW_SIZE-NB_FRAME_SIZE); if (SUBMODE(innovation_quant) == noise_codebook_quant || st->submodeID==0) st->bounded_pitch = 1; @@ -920,7 +1057,10 @@ return 1; } +#endif /* DISABLE_ENCODER */ + +#ifndef DISABLE_DECODER void *nb_decoder_init(const SpeexMode *m) { DecState *st; @@ -944,32 +1084,20 @@ st->first=1; /* Codec parameters, should eventually have several "modes"*/ - st->frameSize = mode->frameSize; - st->nbSubframes=mode->frameSize/mode->subframeSize; - st->subframeSize=mode->subframeSize; - st->lpcSize = mode->lpcSize; - st->min_pitch=mode->pitchStart; - st->max_pitch=mode->pitchEnd; st->submodes=mode->submodes; st->submodeID=mode->defaultSubmode; st->lpc_enh_enabled=1; - st->excBuf = (spx_word16_t*)speex_alloc((st->frameSize + 2*st->max_pitch + st->subframeSize + 12)*sizeof(spx_word16_t)); - st->exc = st->excBuf + 2*st->max_pitch + st->subframeSize + 6; - SPEEX_MEMSET(st->excBuf, 0, st->frameSize + st->max_pitch); - - st->interp_qlpc = (spx_coef_t*)speex_alloc(st->lpcSize*sizeof(spx_coef_t)); - st->old_qlsp = (spx_lsp_t*)speex_alloc(st->lpcSize*sizeof(spx_lsp_t)); - st->mem_sp = (spx_mem_t*)speex_alloc(st->lpcSize*sizeof(spx_mem_t)); - st->pi_gain = (spx_word32_t*)speex_alloc((st->nbSubframes)*sizeof(spx_word32_t)); + SPEEX_MEMSET(st->excBuf, 0, NB_FRAME_SIZE + NB_PITCH_END); + st->last_pitch = 40; st->count_lost=0; st->pitch_gain_buf[0] = st->pitch_gain_buf[1] = st->pitch_gain_buf[2] = 0; st->pitch_gain_buf_idx = 0; st->seed = 1000; - + st->sampling_rate=8000; st->last_ol_gain = 0; @@ -992,25 +1120,145 @@ void nb_decoder_destroy(void *state) { +#if !(defined(VAR_ARRAYS) || defined (USE_ALLOCA)) DecState *st; st=(DecState*)state; - -#if !(defined(VAR_ARRAYS) || defined (USE_ALLOCA)) + speex_free_scratch(st->stack); #endif - speex_free (st->excBuf); - speex_free (st->interp_qlpc); - speex_free (st->old_qlsp); - speex_free (st->mem_sp); - speex_free (st->pi_gain); - speex_free(state); } -#define median3(a, b, c) ((a) < (b) ? ((b) < (c) ? (b) : ((a) < (c) ? (c) : (a))) : ((c) < (b) ? (b) : ((c) < (a) ? (c) : (a)))) - -#ifdef FIXED_POINT +int nb_decoder_ctl(void *state, int request, void *ptr) +{ + DecState *st; + st=(DecState*)state; + switch(request) + { + case SPEEX_SET_LOW_MODE: + case SPEEX_SET_MODE: + st->submodeID = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_LOW_MODE: + case SPEEX_GET_MODE: + (*(spx_int32_t*)ptr) = st->submodeID; + break; + case SPEEX_SET_ENH: + st->lpc_enh_enabled = *((spx_int32_t*)ptr); + break; + case SPEEX_GET_ENH: + *((spx_int32_t*)ptr) = st->lpc_enh_enabled; + break; + case SPEEX_GET_FRAME_SIZE: + (*(spx_int32_t*)ptr) = NB_FRAME_SIZE; + break; + case SPEEX_GET_BITRATE: + if (st->submodes[st->submodeID]) + (*(spx_int32_t*)ptr) = st->sampling_rate*SUBMODE(bits_per_frame)/NB_FRAME_SIZE; + else + (*(spx_int32_t*)ptr) = st->sampling_rate*(NB_SUBMODE_BITS+1)/NB_FRAME_SIZE; + break; + case SPEEX_SET_SAMPLING_RATE: + st->sampling_rate = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_SAMPLING_RATE: + (*(spx_int32_t*)ptr)=st->sampling_rate; + break; + case SPEEX_SET_HANDLER: + { + SpeexCallback *c = (SpeexCallback*)ptr; + st->speex_callbacks[c->callback_id].func=c->func; + st->speex_callbacks[c->callback_id].data=c->data; + st->speex_callbacks[c->callback_id].callback_id=c->callback_id; + } + break; + case SPEEX_SET_USER_HANDLER: + { + SpeexCallback *c = (SpeexCallback*)ptr; + st->user_callback.func=c->func; + st->user_callback.data=c->data; + st->user_callback.callback_id=c->callback_id; + } + break; + case SPEEX_RESET_STATE: + { + int i; + for (i=0;imem_sp[i]=0; + for (i=0;iexcBuf[i]=0; + } + break; + case SPEEX_SET_SUBMODE_ENCODING: + st->encode_submode = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_SUBMODE_ENCODING: + (*(spx_int32_t*)ptr) = st->encode_submode; + break; + case SPEEX_GET_LOOKAHEAD: + (*(spx_int32_t*)ptr)=NB_SUBFRAME_SIZE; + break; + case SPEEX_SET_HIGHPASS: + st->highpass_enabled = (*(spx_int32_t*)ptr); + break; + case SPEEX_GET_HIGHPASS: + (*(spx_int32_t*)ptr) = st->highpass_enabled; + break; + /* FIXME: Convert to fixed-point and re-enable even when float API is disabled */ +#ifndef DISABLE_FLOAT_API + case SPEEX_GET_ACTIVITY: + { + float ret; + ret = log(st->level/st->min_level)/log(st->max_level/st->min_level); + if (ret>1) + ret = 1; + /* Done in a strange way to catch NaNs as well */ + if (!(ret > 0)) + ret = 0; + /*printf ("%f %f %f %f\n", st->level, st->min_level, st->max_level, ret);*/ + (*(spx_int32_t*)ptr) = (int)(100*ret); + } + break; +#endif + case SPEEX_GET_PI_GAIN: + { + int i; + spx_word32_t *g = (spx_word32_t*)ptr; + for (i=0;ipi_gain[i]; + } + break; + case SPEEX_GET_EXC: + { + int i; + for (i=0;iexc+i*NB_SUBFRAME_SIZE, NB_SUBFRAME_SIZE); + } + break; + case SPEEX_GET_DTX_STATUS: + *((spx_int32_t*)ptr) = st->dtx_enabled; + break; + case SPEEX_SET_INNOVATION_SAVE: + st->innov_save = (spx_word16_t*)ptr; + break; + case SPEEX_SET_WIDEBAND: + st->isWideband = *((spx_int32_t*)ptr); + break; + case SPEEX_GET_STACK: + *((char**)ptr) = st->stack; + break; + default: + speex_warning_int("Unknown nb_ctl request: ", request); + return -1; + } + return 0; +} + + +#define median3(a, b, c) ((a) < (b) ? ((b) < (c) ? (b) : ((a) < (c) ? (c) : (a))) : ((c) < (b) ? (b) : ((c) < (a) ? (c) : (a)))) + +#ifdef FIXED_POINT const spx_word16_t attenuation[10] = {32767, 31483, 27923, 22861, 17278, 12055, 7764, 4616, 2533, 1283}; #else const spx_word16_t attenuation[10] = {1., 0.961, 0.852, 0.698, 0.527, 0.368, 0.237, 0.141, 0.077, 0.039}; @@ -1026,7 +1274,9 @@ spx_word16_t gain_med; spx_word16_t innov_gain; spx_word16_t noise_gain; - + + st->exc = st->excBuf + 2*NB_PITCH_END + NB_SUBFRAME_SIZE + 6; + if (st->count_lost<10) fact = attenuation[st->count_lost]; else @@ -1035,41 +1285,41 @@ gain_med = median3(st->pitch_gain_buf[0], st->pitch_gain_buf[1], st->pitch_gain_buf[2]); if (gain_med < st->last_pitch_gain) st->last_pitch_gain = gain_med; - + #ifdef FIXED_POINT pitch_gain = st->last_pitch_gain; if (pitch_gain>54) pitch_gain = 54; pitch_gain = SHL16(pitch_gain, 9); -#else +#else pitch_gain = GAIN_SCALING_1*st->last_pitch_gain; if (pitch_gain>.85) pitch_gain=.85; #endif pitch_gain = MULT16_16_Q15(fact,pitch_gain) + VERY_SMALL; /* FIXME: This was rms of innovation (not exc) */ - innov_gain = compute_rms16(st->exc, st->frameSize); + innov_gain = compute_rms16(st->exc, NB_FRAME_SIZE); noise_gain = MULT16_16_Q15(innov_gain, MULT16_16_Q15(fact, SUB16(Q15ONE,MULT16_16_Q15(pitch_gain,pitch_gain)))); /* Shift all buffers by one frame */ - SPEEX_MOVE(st->excBuf, st->excBuf+st->frameSize, 2*st->max_pitch + st->subframeSize + 12); - + SPEEX_MOVE(st->excBuf, st->excBuf+NB_FRAME_SIZE, 2*NB_PITCH_END + NB_SUBFRAME_SIZE + 12); + pitch_val = st->last_pitch + SHR32((spx_int32_t)speex_rand(1+st->count_lost, &st->seed),SIG_SHIFT); - if (pitch_val > st->max_pitch) - pitch_val = st->max_pitch; - if (pitch_val < st->min_pitch) - pitch_val = st->min_pitch; - for (i=0;iframeSize;i++) + if (pitch_val > NB_PITCH_END) + pitch_val = NB_PITCH_END; + if (pitch_val < NB_PITCH_START) + pitch_val = NB_PITCH_START; + for (i=0;iexc[i]= MULT16_16_Q15(pitch_gain, (st->exc[i-pitch_val]+VERY_SMALL)) + + st->exc[i]= MULT16_16_Q15(pitch_gain, (st->exc[i-pitch_val]+VERY_SMALL)) + speex_rand(noise_gain, &st->seed); } - bw_lpc(QCONST16(.98,15), st->interp_qlpc, st->interp_qlpc, st->lpcSize); - iir_mem16(&st->exc[-st->subframeSize], st->interp_qlpc, out, st->frameSize, - st->lpcSize, st->mem_sp, stack); - highpass(out, out, st->frameSize, HIGHPASS_NARROWBAND|HIGHPASS_OUTPUT, st->mem_hp); - + bw_lpc(QCONST16(.98,15), st->interp_qlpc, st->interp_qlpc, NB_ORDER); + iir_mem16(&st->exc[-NB_SUBFRAME_SIZE], st->interp_qlpc, out, NB_FRAME_SIZE, + NB_ORDER, st->mem_sp, stack); + highpass(out, out, NB_FRAME_SIZE, HIGHPASS_NARROWBAND|HIGHPASS_OUTPUT, st->mem_hp); + st->first = 0; st->count_lost++; st->pitch_gain_buf[st->pitch_gain_buf_idx++] = PSHR16(pitch_gain,9); @@ -1079,7 +1329,7 @@ /* Just so we don't need to carry the complete wideband mode information */ static const int wb_skip_table[8] = {0, 36, 112, 192, 352, 0, 0, 0}; - + int nb_decode(void *state, SpeexBits *bits, void *vout) { DecState *st; @@ -1099,18 +1349,20 @@ VARDECL(spx_coef_t *ak); VARDECL(spx_lsp_t *qlsp); spx_word16_t pitch_average=0; - + spx_word16_t *out = (spx_word16_t*)vout; VARDECL(spx_lsp_t *interp_qlsp); st=(DecState*)state; stack=st->stack; + st->exc = st->excBuf + 2*NB_PITCH_END + NB_SUBFRAME_SIZE + 6; + /* Check if we're in DTX mode*/ if (!bits && st->dtx_enabled) { st->submodeID=0; - } else + } else { /* If bits is NULL, consider the packet to be lost (what could we do anyway) */ if (!bits) @@ -1138,10 +1390,10 @@ { speex_notify("Invalid mode encountered. The stream is corrupted."); return -2; - } + } advance -= (SB_SUBMODE_BITS+1); speex_bits_advance(bits, advance); - + if (speex_bits_remaining(bits)<5) return -1; wideband = speex_bits_unpack_unsigned(bits, 1); @@ -1154,7 +1406,7 @@ { speex_notify("Invalid mode encountered. The stream is corrupted."); return -2; - } + } advance -= (SB_SUBMODE_BITS+1); speex_bits_advance(bits, advance); wideband = speex_bits_unpack_unsigned(bits, 1); @@ -1188,7 +1440,7 @@ speex_notify("Invalid mode encountered. The stream is corrupted."); return -2; } - + } while (m>8); /* Get the sub-mode that was used */ @@ -1198,19 +1450,19 @@ } /* Shift all buffers by one frame */ - SPEEX_MOVE(st->excBuf, st->excBuf+st->frameSize, 2*st->max_pitch + st->subframeSize + 12); + SPEEX_MOVE(st->excBuf, st->excBuf+NB_FRAME_SIZE, 2*NB_PITCH_END + NB_SUBFRAME_SIZE + 12); /* If null mode (no transmission), just set a couple things to zero*/ if (st->submodes[st->submodeID] == NULL) { VARDECL(spx_coef_t *lpc); - ALLOC(lpc, st->lpcSize, spx_coef_t); - bw_lpc(QCONST16(0.93f,15), st->interp_qlpc, lpc, st->lpcSize); + ALLOC(lpc, NB_ORDER, spx_coef_t); + bw_lpc(QCONST16(0.93f,15), st->interp_qlpc, lpc, NB_ORDER); { spx_word16_t innov_gain=0; /* FIXME: This was innov, not exc */ - innov_gain = compute_rms16(st->exc, st->frameSize); - for (i=0;iframeSize;i++) + innov_gain = compute_rms16(st->exc, NB_FRAME_SIZE); + for (i=0;iexc[i]=speex_rand(innov_gain, &st->seed); } @@ -1218,30 +1470,30 @@ st->first=1; /* Final signal synthesis from excitation */ - iir_mem16(st->exc, lpc, out, st->frameSize, st->lpcSize, st->mem_sp, stack); + iir_mem16(st->exc, lpc, out, NB_FRAME_SIZE, NB_ORDER, st->mem_sp, stack); st->count_lost=0; return 0; } - ALLOC(qlsp, st->lpcSize, spx_lsp_t); + ALLOC(qlsp, NB_ORDER, spx_lsp_t); /* Unquantize LSPs */ - SUBMODE(lsp_unquant)(qlsp, st->lpcSize, bits); + SUBMODE(lsp_unquant)(qlsp, NB_ORDER, bits); /*Damp memory if a frame was lost and the LSP changed too much*/ if (st->count_lost) { spx_word16_t fact; spx_word32_t lsp_dist=0; - for (i=0;ilpcSize;i++) + for (i=0;iold_qlsp[i] - qlsp[i]))); #ifdef FIXED_POINT - fact = SHR16(19661,SHR32(lsp_dist,LSP_SHIFT+2)); + fact = SHR16(19661,SHR32(lsp_dist,LSP_SHIFT+2)); #else fact = .6*exp(-.2*lsp_dist); #endif - for (i=0;ilpcSize;i++) + for (i=0;imem_sp[i] = MULT16_32_Q15(fact,st->mem_sp[i]); } @@ -1249,23 +1501,23 @@ /* Handle first frame and lost-packet case */ if (st->first || st->count_lost) { - for (i=0;ilpcSize;i++) + for (i=0;iold_qlsp[i] = qlsp[i]; } /* Get open-loop pitch estimation for low bit-rate pitch coding */ if (SUBMODE(lbr_pitch)!=-1) { - ol_pitch = st->min_pitch+speex_bits_unpack_unsigned(bits, 7); - } - + ol_pitch = NB_PITCH_START+speex_bits_unpack_unsigned(bits, 7); + } + if (SUBMODE(forced_pitch_gain)) { int quant; quant = speex_bits_unpack_unsigned(bits, 4); ol_pitch_coef=MULT16_16_P15(QCONST16(0.066667,15),SHL16(quant,GAIN_SHIFT)); } - + /* Get global excitation gain */ { int qe; @@ -1278,9 +1530,9 @@ #endif } - ALLOC(ak, st->lpcSize, spx_coef_t); - ALLOC(innov, st->subframeSize, spx_sig_t); - ALLOC(exc32, st->subframeSize, spx_word32_t); + ALLOC(ak, NB_ORDER, spx_coef_t); + ALLOC(innov, NB_SUBFRAME_SIZE, spx_sig_t); + ALLOC(exc32, NB_SUBFRAME_SIZE, spx_word32_t); if (st->submodeID==1) { @@ -1296,26 +1548,24 @@ st->dtx_enabled=0; /*Loop on subframes */ - for (sub=0;subnbSubframes;sub++) + for (sub=0;subsubframeSize*sub; + offset = NB_SUBFRAME_SIZE*sub; /* Excitation */ exc=st->exc+offset; /* Original signal */ - sp=out+offset; if (st->innov_save) innov_save = st->innov_save+offset; /* Reset excitation */ - SPEEX_MEMSET(exc, 0, st->subframeSize); + SPEEX_MEMSET(exc, 0, NB_SUBFRAME_SIZE); /*Adaptive codebook contribution*/ speex_assert (SUBMODE(ltp_unquant)); @@ -1329,43 +1579,43 @@ if (margin) { /* GT - need optimization? - if (ol_pitch < st->min_pitch+margin-1) - ol_pitch=st->min_pitch+margin-1; - if (ol_pitch > st->max_pitch-margin) - ol_pitch=st->max_pitch-margin; + if (ol_pitch < NB_PITCH_START+margin-1) + ol_pitch=NB_PITCH_START+margin-1; + if (ol_pitch > NB_PITCH_END-margin) + ol_pitch=NB_PITCH_END-margin; pit_min = ol_pitch-margin+1; pit_max = ol_pitch+margin; */ pit_min = ol_pitch-margin+1; - if (pit_min < st->min_pitch) - pit_min = st->min_pitch; + if (pit_min < NB_PITCH_START) + pit_min = NB_PITCH_START; pit_max = ol_pitch+margin; - if (pit_max > st->max_pitch) - pit_max = st->max_pitch; + if (pit_max > NB_PITCH_END) + pit_max = NB_PITCH_END; } else { pit_min = pit_max = ol_pitch; } } else { - pit_min = st->min_pitch; - pit_max = st->max_pitch; + pit_min = NB_PITCH_START; + pit_max = NB_PITCH_END; } - SUBMODE(ltp_unquant)(exc, exc32, pit_min, pit_max, ol_pitch_coef, SUBMODE(ltp_params), - st->subframeSize, &pitch, &pitch_gain[0], bits, stack, + SUBMODE(ltp_unquant)(exc, exc32, pit_min, pit_max, ol_pitch_coef, SUBMODE(ltp_params), + NB_SUBFRAME_SIZE, &pitch, &pitch_gain[0], bits, stack, st->count_lost, offset, st->last_pitch_gain, 0); - /* Ensuring that things aren't blowing up as would happen if e.g. an encoder is + /* Ensuring that things aren't blowing up as would happen if e.g. an encoder is crafting packets to make us produce NaNs and slow down the decoder (vague DoS threat). We can probably be even more aggressive and limit to 15000 or so. */ - sanitize_values32(exc32, NEG32(QCONST32(32000,SIG_SHIFT-1)), QCONST32(32000,SIG_SHIFT-1), st->subframeSize); - + sanitize_values32(exc32, NEG32(QCONST32(32000,SIG_SHIFT-1)), QCONST32(32000,SIG_SHIFT-1), NB_SUBFRAME_SIZE); + tmp = gain_3tap_to_1tap(pitch_gain); pitch_average += tmp; - if ((tmp>best_pitch_gain&&ABS(2*best_pitch-pitch)>=3&&ABS(3*best_pitch-pitch)>=4&&ABS(4*best_pitch-pitch)>=5) - || (tmp>MULT16_16_Q15(QCONST16(.6,15),best_pitch_gain)&&(ABS(best_pitch-2*pitch)<3||ABS(best_pitch-3*pitch)<4||ABS(best_pitch-4*pitch)<5)) + if ((tmp>best_pitch_gain&&ABS(2*best_pitch-pitch)>=3&&ABS(3*best_pitch-pitch)>=4&&ABS(4*best_pitch-pitch)>=5) + || (tmp>MULT16_16_Q15(QCONST16(.6,15),best_pitch_gain)&&(ABS(best_pitch-2*pitch)<3||ABS(best_pitch-3*pitch)<4||ABS(best_pitch-4*pitch)<5)) || (MULT16_16_Q15(QCONST16(.67,15),tmp)>best_pitch_gain&&(ABS(2*best_pitch-pitch)<3||ABS(3*best_pitch-pitch)<4||ABS(4*best_pitch-pitch)<5)) ) { best_pitch = pitch; @@ -1373,13 +1623,13 @@ best_pitch_gain = tmp; } } - + /* Unquantize the innovation */ { int q_energy; spx_word32_t ener; - - SPEEX_MEMSET(innov, 0, st->subframeSize); + + SPEEX_MEMSET(innov, 0, NB_SUBFRAME_SIZE); /* Decode sub-frame gain correction */ if (SUBMODE(have_subframe_gain)==3) @@ -1393,40 +1643,40 @@ } else { ener = ol_gain; } - + speex_assert (SUBMODE(innovation_unquant)); { /*Fixed codebook contribution*/ - SUBMODE(innovation_unquant)(innov, SUBMODE(innovation_params), st->subframeSize, bits, stack, &st->seed); + SUBMODE(innovation_unquant)(innov, SUBMODE(innovation_params), NB_SUBFRAME_SIZE, bits, stack, &st->seed); /* De-normalize innovation and update excitation */ - signal_mul(innov, innov, ener, st->subframeSize); + signal_mul(innov, innov, ener, NB_SUBFRAME_SIZE); /* Decode second codebook (only for some modes) */ if (SUBMODE(double_codebook)) { char *tmp_stack=stack; VARDECL(spx_sig_t *innov2); - ALLOC(innov2, st->subframeSize, spx_sig_t); - SPEEX_MEMSET(innov2, 0, st->subframeSize); - SUBMODE(innovation_unquant)(innov2, SUBMODE(innovation_params), st->subframeSize, bits, stack, &st->seed); - signal_mul(innov2, innov2, MULT16_32_Q15(QCONST16(0.454545f,15),ener), st->subframeSize); - for (i=0;isubframeSize;i++) + ALLOC(innov2, NB_SUBFRAME_SIZE, spx_sig_t); + SPEEX_MEMSET(innov2, 0, NB_SUBFRAME_SIZE); + SUBMODE(innovation_unquant)(innov2, SUBMODE(innovation_params), NB_SUBFRAME_SIZE, bits, stack, &st->seed); + signal_mul(innov2, innov2, MULT16_32_Q15(QCONST16(0.454545f,15),ener), NB_SUBFRAME_SIZE); + for (i=0;isubframeSize;i++) + for (i=0;isubframeSize;i++) + for (i=0;isubmodeID==1) + if (st->submodeID==1) { spx_word16_t g=ol_pitch_coef; g=MULT16_16_P14(QCONST16(1.5f,14),(g-QCONST16(.2f,6))); @@ -1434,9 +1684,9 @@ g=0; if (g>GAIN_SCALING) g=GAIN_SCALING; - - SPEEX_MEMSET(exc, 0, st->subframeSize); - while (st->voc_offsetsubframeSize) + + SPEEX_MEMSET(exc, 0, NB_SUBFRAME_SIZE); + while (st->voc_offsetvoc_offset]= g*sqrt(2*ol_pitch)*ol_gain; Not quite sure why we need the factor of two in the sqrt */ @@ -1444,9 +1694,9 @@ exc[st->voc_offset]=MULT16_16(spx_sqrt(MULT16_16_16(2,ol_pitch)),EXTRACT16(PSHR32(MULT16_16(g,PSHR32(ol_gain,SIG_SHIFT)),6))); st->voc_offset+=ol_pitch; } - st->voc_offset -= st->subframeSize; - - for (i=0;isubframeSize;i++) + st->voc_offset -= NB_SUBFRAME_SIZE; + + for (i=0;ivoc_m1)), @@ -1462,24 +1712,24 @@ } } - - ALLOC(interp_qlsp, st->lpcSize, spx_lsp_t); + + ALLOC(interp_qlsp, NB_ORDER, spx_lsp_t); if (st->lpc_enh_enabled && SUBMODE(comb_gain)>0 && !st->count_lost) { - multicomb(st->exc-st->subframeSize, out, st->interp_qlpc, st->lpcSize, 2*st->subframeSize, best_pitch, 40, SUBMODE(comb_gain), stack); - multicomb(st->exc+st->subframeSize, out+2*st->subframeSize, st->interp_qlpc, st->lpcSize, 2*st->subframeSize, best_pitch, 40, SUBMODE(comb_gain), stack); + multicomb(st->exc-NB_SUBFRAME_SIZE, out, st->interp_qlpc, NB_ORDER, 2*NB_SUBFRAME_SIZE, best_pitch, 40, SUBMODE(comb_gain), stack); + multicomb(st->exc+NB_SUBFRAME_SIZE, out+2*NB_SUBFRAME_SIZE, st->interp_qlpc, NB_ORDER, 2*NB_SUBFRAME_SIZE, best_pitch, 40, SUBMODE(comb_gain), stack); } else { - SPEEX_COPY(out, &st->exc[-st->subframeSize], st->frameSize); + SPEEX_COPY(out, &st->exc[-NB_SUBFRAME_SIZE], NB_FRAME_SIZE); } - + /* If the last packet was lost, re-scale the excitation to obtain the same energy as encoded in ol_gain */ - if (st->count_lost) + if (st->count_lost) { spx_word16_t exc_ener; spx_word32_t gain32; spx_word16_t gain; - exc_ener = compute_rms16 (st->exc, st->frameSize); + exc_ener = compute_rms16 (st->exc, NB_FRAME_SIZE); gain32 = PDIV32(ol_gain, ADD16(exc_ener,1)); #ifdef FIXED_POINT if (gain32 > 32767) @@ -1490,57 +1740,52 @@ gain32=2; gain = gain32; #endif - for (i=0;iframeSize;i++) + for (i=0;iexc[i] = MULT16_16_Q14(gain, st->exc[i]); - out[i]=st->exc[i-st->subframeSize]; + out[i]=st->exc[i-NB_SUBFRAME_SIZE]; } } /*Loop on subframes */ - for (sub=0;subnbSubframes;sub++) + for (sub=0;subsubframeSize*sub; + offset = NB_SUBFRAME_SIZE*sub; /* Original signal */ sp=out+offset; - /* Excitation */ - exc=st->exc+offset; /* LSP interpolation (quantized and unquantized) */ - lsp_interpolate(st->old_qlsp, qlsp, interp_qlsp, st->lpcSize, sub, st->nbSubframes); - - /* Make sure the LSP's are stable */ - lsp_enforce_margin(interp_qlsp, st->lpcSize, LSP_MARGIN); + lsp_interpolate(st->old_qlsp, qlsp, interp_qlsp, NB_ORDER, sub, NB_NB_SUBFRAMES, LSP_MARGIN); /* Compute interpolated LPCs (unquantized) */ - lsp_to_lpc(interp_qlsp, ak, st->lpcSize, stack); + lsp_to_lpc(interp_qlsp, ak, NB_ORDER, stack); /* Compute analysis filter at w=pi */ { spx_word32_t pi_g=LPC_SCALING; - for (i=0;ilpcSize;i+=2) + for (i=0;iinterp_qlpc[i] + st->interp_qlpc[i+1];*/ pi_g = ADD32(pi_g, SUB32(EXTEND32(ak[i+1]),EXTEND32(ak[i]))); } st->pi_gain[sub] = pi_g; } - - iir_mem16(sp, st->interp_qlpc, sp, st->subframeSize, st->lpcSize, + + iir_mem16(sp, st->interp_qlpc, sp, NB_SUBFRAME_SIZE, NB_ORDER, st->mem_sp, stack); - - for (i=0;ilpcSize;i++) + + for (i=0;iinterp_qlpc[i] = ak[i]; } if (st->highpass_enabled) - highpass(out, out, st->frameSize, (st->isWideband?HIGHPASS_WIDEBAND:HIGHPASS_NARROWBAND)|HIGHPASS_OUTPUT, st->mem_hp); - /*for (i=0;iframeSize;i++) + highpass(out, out, NB_FRAME_SIZE, (st->isWideband?HIGHPASS_WIDEBAND:HIGHPASS_NARROWBAND)|HIGHPASS_OUTPUT, st->mem_hp); + /*for (i=0;iframe[i]);*/ /* Tracking output level */ @@ -1550,9 +1795,9 @@ if (st->max_level < st->min_level+1) st->max_level = st->min_level+1; /*printf ("%f %f %f %d\n", og, st->min_level, st->max_level, update);*/ - + /* Store the LSPs for interpolation in the next frame */ - for (i=0;ilpcSize;i++) + for (i=0;iold_qlsp[i] = qlsp[i]; /* The next frame will not be the first (Duh!) */ @@ -1562,7 +1807,7 @@ #ifdef FIXED_POINT st->last_pitch_gain = PSHR16(pitch_average,2); #else - st->last_pitch_gain = .25*pitch_average; + st->last_pitch_gain = .25*pitch_average; #endif st->pitch_gain_buf[st->pitch_gain_buf_idx++] = st->last_pitch_gain; if (st->pitch_gain_buf_idx > 2) /* rollover */ @@ -1572,332 +1817,5 @@ return 0; } +#endif /* DISABLE_DECODER */ -int nb_encoder_ctl(void *state, int request, void *ptr) -{ - EncState *st; - st=(EncState*)state; - switch(request) - { - case SPEEX_GET_FRAME_SIZE: - (*(spx_int32_t*)ptr) = st->frameSize; - break; - case SPEEX_SET_LOW_MODE: - case SPEEX_SET_MODE: - st->submodeSelect = st->submodeID = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_LOW_MODE: - case SPEEX_GET_MODE: - (*(spx_int32_t*)ptr) = st->submodeID; - break; -#ifndef DISABLE_VBR - case SPEEX_SET_VBR: - st->vbr_enabled = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_VBR: - (*(spx_int32_t*)ptr) = st->vbr_enabled; - break; - case SPEEX_SET_VAD: - st->vad_enabled = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_VAD: - (*(spx_int32_t*)ptr) = st->vad_enabled; - break; - case SPEEX_SET_DTX: - st->dtx_enabled = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_DTX: - (*(spx_int32_t*)ptr) = st->dtx_enabled; - break; - case SPEEX_SET_ABR: - st->abr_enabled = (*(spx_int32_t*)ptr); - st->vbr_enabled = st->abr_enabled!=0; - if (st->vbr_enabled) - { - spx_int32_t i=10; - spx_int32_t rate, target; - float vbr_qual; - target = (*(spx_int32_t*)ptr); - while (i>=0) - { - speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i); - speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate); - if (rate <= target) - break; - i--; - } - vbr_qual=i; - if (vbr_qual<0) - vbr_qual=0; - speex_encoder_ctl(st, SPEEX_SET_VBR_QUALITY, &vbr_qual); - st->abr_count=0; - st->abr_drift=0; - st->abr_drift2=0; - } - - break; - case SPEEX_GET_ABR: - (*(spx_int32_t*)ptr) = st->abr_enabled; - break; -#endif /* #ifndef DISABLE_VBR */ -#if !defined(DISABLE_VBR) && !defined(DISABLE_FLOAT_API) - case SPEEX_SET_VBR_QUALITY: - st->vbr_quality = (*(float*)ptr); - break; - case SPEEX_GET_VBR_QUALITY: - (*(float*)ptr) = st->vbr_quality; - break; -#endif /* !defined(DISABLE_VBR) && !defined(DISABLE_FLOAT_API) */ - case SPEEX_SET_QUALITY: - { - int quality = (*(spx_int32_t*)ptr); - if (quality < 0) - quality = 0; - if (quality > 10) - quality = 10; - st->submodeSelect = st->submodeID = ((const SpeexNBMode*)(st->mode->mode))->quality_map[quality]; - } - break; - case SPEEX_SET_COMPLEXITY: - st->complexity = (*(spx_int32_t*)ptr); - if (st->complexity<0) - st->complexity=0; - break; - case SPEEX_GET_COMPLEXITY: - (*(spx_int32_t*)ptr) = st->complexity; - break; - case SPEEX_SET_BITRATE: - { - spx_int32_t i=10; - spx_int32_t rate, target; - target = (*(spx_int32_t*)ptr); - while (i>=0) - { - speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i); - speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate); - if (rate <= target) - break; - i--; - } - } - break; - case SPEEX_GET_BITRATE: - if (st->submodes[st->submodeID]) - (*(spx_int32_t*)ptr) = st->sampling_rate*SUBMODE(bits_per_frame)/st->frameSize; - else - (*(spx_int32_t*)ptr) = st->sampling_rate*(NB_SUBMODE_BITS+1)/st->frameSize; - break; - case SPEEX_SET_SAMPLING_RATE: - st->sampling_rate = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_SAMPLING_RATE: - (*(spx_int32_t*)ptr)=st->sampling_rate; - break; - case SPEEX_RESET_STATE: - { - int i; - st->bounded_pitch = 1; - st->first = 1; - for (i=0;ilpcSize;i++) - st->old_lsp[i]= DIV32(MULT16_16(QCONST16(3.1415927f, LSP_SHIFT), i+1), st->lpcSize+1); - for (i=0;ilpcSize;i++) - st->mem_sw[i]=st->mem_sw_whole[i]=st->mem_sp[i]=st->mem_exc[i]=0; - for (i=0;iframeSize+st->max_pitch+1;i++) - st->excBuf[i]=st->swBuf[i]=0; - for (i=0;iwindowSize-st->frameSize;i++) - st->winBuf[i]=0; - } - break; - case SPEEX_SET_SUBMODE_ENCODING: - st->encode_submode = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_SUBMODE_ENCODING: - (*(spx_int32_t*)ptr) = st->encode_submode; - break; - case SPEEX_GET_LOOKAHEAD: - (*(spx_int32_t*)ptr)=(st->windowSize-st->frameSize); - break; - case SPEEX_SET_PLC_TUNING: - st->plc_tuning = (*(spx_int32_t*)ptr); - if (st->plc_tuning>100) - st->plc_tuning=100; - break; - case SPEEX_GET_PLC_TUNING: - (*(spx_int32_t*)ptr)=(st->plc_tuning); - break; -#ifndef DISABLE_VBR - case SPEEX_SET_VBR_MAX_BITRATE: - st->vbr_max = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_VBR_MAX_BITRATE: - (*(spx_int32_t*)ptr) = st->vbr_max; - break; -#endif /* #ifndef DISABLE_VBR */ - case SPEEX_SET_HIGHPASS: - st->highpass_enabled = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_HIGHPASS: - (*(spx_int32_t*)ptr) = st->highpass_enabled; - break; - - /* This is all internal stuff past this point */ - case SPEEX_GET_PI_GAIN: - { - int i; - spx_word32_t *g = (spx_word32_t*)ptr; - for (i=0;inbSubframes;i++) - g[i]=st->pi_gain[i]; - } - break; - case SPEEX_GET_EXC: - { - int i; - for (i=0;inbSubframes;i++) - ((spx_word16_t*)ptr)[i] = compute_rms16(st->exc+i*st->subframeSize, st->subframeSize); - } - break; -#ifndef DISABLE_VBR - case SPEEX_GET_RELATIVE_QUALITY: - (*(float*)ptr)=st->relative_quality; - break; -#endif /* #ifndef DISABLE_VBR */ - case SPEEX_SET_INNOVATION_SAVE: - st->innov_rms_save = (spx_word16_t*)ptr; - break; - case SPEEX_SET_WIDEBAND: - st->isWideband = *((spx_int32_t*)ptr); - break; - case SPEEX_GET_STACK: - *((char**)ptr) = st->stack; - break; - default: - speex_warning_int("Unknown nb_ctl request: ", request); - return -1; - } - return 0; -} - -int nb_decoder_ctl(void *state, int request, void *ptr) -{ - DecState *st; - st=(DecState*)state; - switch(request) - { - case SPEEX_SET_LOW_MODE: - case SPEEX_SET_MODE: - st->submodeID = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_LOW_MODE: - case SPEEX_GET_MODE: - (*(spx_int32_t*)ptr) = st->submodeID; - break; - case SPEEX_SET_ENH: - st->lpc_enh_enabled = *((spx_int32_t*)ptr); - break; - case SPEEX_GET_ENH: - *((spx_int32_t*)ptr) = st->lpc_enh_enabled; - break; - case SPEEX_GET_FRAME_SIZE: - (*(spx_int32_t*)ptr) = st->frameSize; - break; - case SPEEX_GET_BITRATE: - if (st->submodes[st->submodeID]) - (*(spx_int32_t*)ptr) = st->sampling_rate*SUBMODE(bits_per_frame)/st->frameSize; - else - (*(spx_int32_t*)ptr) = st->sampling_rate*(NB_SUBMODE_BITS+1)/st->frameSize; - break; - case SPEEX_SET_SAMPLING_RATE: - st->sampling_rate = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_SAMPLING_RATE: - (*(spx_int32_t*)ptr)=st->sampling_rate; - break; - case SPEEX_SET_HANDLER: - { - SpeexCallback *c = (SpeexCallback*)ptr; - st->speex_callbacks[c->callback_id].func=c->func; - st->speex_callbacks[c->callback_id].data=c->data; - st->speex_callbacks[c->callback_id].callback_id=c->callback_id; - } - break; - case SPEEX_SET_USER_HANDLER: - { - SpeexCallback *c = (SpeexCallback*)ptr; - st->user_callback.func=c->func; - st->user_callback.data=c->data; - st->user_callback.callback_id=c->callback_id; - } - break; - case SPEEX_RESET_STATE: - { - int i; - for (i=0;ilpcSize;i++) - st->mem_sp[i]=0; - for (i=0;iframeSize + st->max_pitch + 1;i++) - st->excBuf[i]=0; - } - break; - case SPEEX_SET_SUBMODE_ENCODING: - st->encode_submode = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_SUBMODE_ENCODING: - (*(spx_int32_t*)ptr) = st->encode_submode; - break; - case SPEEX_GET_LOOKAHEAD: - (*(spx_int32_t*)ptr)=st->subframeSize; - break; - case SPEEX_SET_HIGHPASS: - st->highpass_enabled = (*(spx_int32_t*)ptr); - break; - case SPEEX_GET_HIGHPASS: - (*(spx_int32_t*)ptr) = st->highpass_enabled; - break; - /* FIXME: Convert to fixed-point and re-enable even when float API is disabled */ -#ifndef DISABLE_FLOAT_API - case SPEEX_GET_ACTIVITY: - { - float ret; - ret = log(st->level/st->min_level)/log(st->max_level/st->min_level); - if (ret>1) - ret = 1; - /* Done in a strange way to catch NaNs as well */ - if (!(ret > 0)) - ret = 0; - /*printf ("%f %f %f %f\n", st->level, st->min_level, st->max_level, ret);*/ - (*(spx_int32_t*)ptr) = (int)(100*ret); - } - break; -#endif - case SPEEX_GET_PI_GAIN: - { - int i; - spx_word32_t *g = (spx_word32_t*)ptr; - for (i=0;inbSubframes;i++) - g[i]=st->pi_gain[i]; - } - break; - case SPEEX_GET_EXC: - { - int i; - for (i=0;inbSubframes;i++) - ((spx_word16_t*)ptr)[i] = compute_rms16(st->exc+i*st->subframeSize, st->subframeSize); - } - break; - case SPEEX_GET_DTX_STATUS: - *((spx_int32_t*)ptr) = st->dtx_enabled; - break; - case SPEEX_SET_INNOVATION_SAVE: - st->innov_save = (spx_word16_t*)ptr; - break; - case SPEEX_SET_WIDEBAND: - st->isWideband = *((spx_int32_t*)ptr); - break; - case SPEEX_GET_STACK: - *((char**)ptr) = st->stack; - break; - default: - speex_warning_int("Unknown nb_ctl request: ", request); - return -1; - } - return 0; -} diff -Nru speex-1.2~rc1.2/libspeex/nb_celp.h speex-1.2.0/libspeex/nb_celp.h --- speex-1.2~rc1.2/libspeex/nb_celp.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/nb_celp.h 2015-07-06 15:02:00.000000000 +0000 @@ -37,8 +37,7 @@ #define NB_CELP_H #include "modes.h" -#include -#include +#include "speex/speex_callbacks.h" #include "vbr.h" #include "filters.h" @@ -46,23 +45,26 @@ #include "vorbis_psy.h" #endif +#define NB_ORDER 10 +#define NB_FRAME_SIZE 160 +#define NB_SUBFRAME_SIZE 40 +#define NB_NB_SUBFRAMES 4 +#define NB_PITCH_START 17 +#define NB_PITCH_END 144 + +#define NB_WINDOW_SIZE (NB_FRAME_SIZE+NB_SUBFRAME_SIZE) +#define NB_EXCBUF (NB_FRAME_SIZE+NB_PITCH_END+2) +#define NB_DEC_BUFFER (NB_FRAME_SIZE+2*NB_PITCH_END+NB_SUBFRAME_SIZE+12) /**Structure representing the full state of the narrowband encoder*/ typedef struct EncState { const SpeexMode *mode; /**< Mode corresponding to the state */ int first; /**< Is this the first frame? */ - int frameSize; /**< Size of frames */ - int subframeSize; /**< Size of sub-frames */ - int nbSubframes; /**< Number of sub-frames */ - int windowSize; /**< Analysis (LPC) window length */ - int lpcSize; /**< LPC order */ - int min_pitch; /**< Minimum pitch value allowed */ - int max_pitch; /**< Maximum pitch value allowed */ spx_word32_t cumul_gain; /**< Product of previously used pitch gains (Q10) */ int bounded_pitch; /**< Next frame should not rely on previous frames for pitch */ int ol_pitch; /**< Open-loop pitch */ int ol_voiced; /**< Open-loop voiced/non-voiced decision */ - int *pitch; + int pitch[NB_NB_SUBFRAMES]; #ifdef VORBIS_PSYCHO VorbisPsy *psy; @@ -75,26 +77,26 @@ spx_word16_t gamma2; /**< Perceptual filter: A(z/gamma2) */ spx_word16_t lpc_floor; /**< Noise floor multiplier for A[0] in LPC analysis*/ char *stack; /**< Pseudo-stack allocation for temporary memory */ - spx_word16_t *winBuf; /**< Input buffer (original signal) */ - spx_word16_t *excBuf; /**< Excitation buffer */ + spx_word16_t winBuf[NB_WINDOW_SIZE-NB_FRAME_SIZE]; /**< Input buffer (original signal) */ + spx_word16_t excBuf[NB_EXCBUF]; /**< Excitation buffer */ spx_word16_t *exc; /**< Start of excitation frame */ - spx_word16_t *swBuf; /**< Weighted signal buffer */ + spx_word16_t swBuf[NB_EXCBUF]; /**< Weighted signal buffer */ spx_word16_t *sw; /**< Start of weighted signal frame */ const spx_word16_t *window; /**< Temporary (Hanning) window */ const spx_word16_t *lagWindow; /**< Window applied to auto-correlation */ - spx_lsp_t *old_lsp; /**< LSPs for previous frame */ - spx_lsp_t *old_qlsp; /**< Quantized LSPs for previous frame */ - spx_mem_t *mem_sp; /**< Filter memory for signal synthesis */ - spx_mem_t *mem_sw; /**< Filter memory for perceptually-weighted signal */ - spx_mem_t *mem_sw_whole; /**< Filter memory for perceptually-weighted signal (whole frame)*/ - spx_mem_t *mem_exc; /**< Filter memory for excitation (whole frame) */ - spx_mem_t *mem_exc2; /**< Filter memory for excitation (whole frame) */ + spx_lsp_t old_lsp[NB_ORDER]; /**< LSPs for previous frame */ + spx_lsp_t old_qlsp[NB_ORDER]; /**< Quantized LSPs for previous frame */ + spx_mem_t mem_sp[NB_ORDER]; /**< Filter memory for signal synthesis */ + spx_mem_t mem_sw[NB_ORDER]; /**< Filter memory for perceptually-weighted signal */ + spx_mem_t mem_sw_whole[NB_ORDER]; /**< Filter memory for perceptually-weighted signal (whole frame)*/ + spx_mem_t mem_exc[NB_ORDER]; /**< Filter memory for excitation (whole frame) */ + spx_mem_t mem_exc2[NB_ORDER]; /**< Filter memory for excitation (whole frame) */ spx_mem_t mem_hp[2]; /**< High-pass filter memory */ - spx_word32_t *pi_gain; /**< Gain of LPC filter at theta=pi (fe/2) */ + spx_word32_t pi_gain[NB_NB_SUBFRAMES]; /**< Gain of LPC filter at theta=pi (fe/2) */ spx_word16_t *innov_rms_save; /**< If non-NULL, innovation RMS is copied here */ #ifndef DISABLE_VBR - VBRState *vbr; /**< State of the VBR data */ + VBRState vbr; /**< State of the VBR data */ float vbr_quality; /**< Quality setting for VBR encoding */ float relative_quality; /**< Relative quality that will be needed by VBR */ spx_int32_t vbr_enabled; /**< 1 for enabling VBR, 0 otherwise */ @@ -124,24 +126,18 @@ const SpeexMode *mode; /**< Mode corresponding to the state */ int first; /**< Is this the first frame? */ int count_lost; /**< Was the last frame lost? */ - int frameSize; /**< Size of frames */ - int subframeSize; /**< Size of sub-frames */ - int nbSubframes; /**< Number of sub-frames */ - int lpcSize; /**< LPC order */ - int min_pitch; /**< Minimum pitch value allowed */ - int max_pitch; /**< Maximum pitch value allowed */ spx_int32_t sampling_rate; spx_word16_t last_ol_gain; /**< Open-loop gain for previous frame */ char *stack; /**< Pseudo-stack allocation for temporary memory */ - spx_word16_t *excBuf; /**< Excitation buffer */ + spx_word16_t excBuf[NB_DEC_BUFFER]; /**< Excitation buffer */ spx_word16_t *exc; /**< Start of excitation frame */ - spx_lsp_t *old_qlsp; /**< Quantized LSPs for previous frame */ - spx_coef_t *interp_qlpc; /**< Interpolated quantized LPCs */ - spx_mem_t *mem_sp; /**< Filter memory for synthesis signal */ + spx_lsp_t old_qlsp[NB_ORDER]; /**< Quantized LSPs for previous frame */ + spx_coef_t interp_qlpc[NB_ORDER]; /**< Interpolated quantized LPCs */ + spx_mem_t mem_sp[NB_ORDER]; /**< Filter memory for synthesis signal */ spx_mem_t mem_hp[2]; /**< High-pass filter memory */ - spx_word32_t *pi_gain; /**< Gain of LPC filter at theta=pi (fe/2) */ + spx_word32_t pi_gain[NB_NB_SUBFRAMES]; /**< Gain of LPC filter at theta=pi (fe/2) */ spx_word16_t *innov_save; /** If non-NULL, innovation is copied here */ spx_word16_t level; diff -Nru speex-1.2~rc1.2/libspeex/os_support.h speex-1.2.0/libspeex/os_support.h --- speex-1.2~rc1.2/libspeex/os_support.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/os_support.h 2015-07-06 15:01:58.000000000 +0000 @@ -90,18 +90,18 @@ } #endif -/** Copy n bytes of memory from src to dst. The 0* term provides compile-time type checking */ +/** Copy n elements from src to dst. The 0* term provides compile-time type checking */ #ifndef OVERRIDE_SPEEX_COPY #define SPEEX_COPY(dst, src, n) (memcpy((dst), (src), (n)*sizeof(*(dst)) + 0*((dst)-(src)) )) #endif -/** Copy n bytes of memory from src to dst, allowing overlapping regions. The 0* term +/** Copy n elements from src to dst, allowing overlapping regions. The 0* term provides compile-time type checking */ #ifndef OVERRIDE_SPEEX_MOVE #define SPEEX_MOVE(dst, src, n) (memmove((dst), (src), (n)*sizeof(*(dst)) + 0*((dst)-(src)) )) #endif -/** Set n bytes of memory to value of c, starting at address s */ +/** For n elements worth of memory, set every byte to the value of c, starting at address dst */ #ifndef OVERRIDE_SPEEX_MEMSET #define SPEEX_MEMSET(dst, c, n) (memset((dst), (c), (n)*sizeof(*(dst)))) #endif diff -Nru speex-1.2~rc1.2/libspeex/preprocess.c speex-1.2.0/libspeex/preprocess.c --- speex-1.2~rc1.2/libspeex/preprocess.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/preprocess.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,1219 +0,0 @@ -/* Copyright (C) 2003 Epic Games (written by Jean-Marc Valin) - Copyright (C) 2004-2006 Epic Games - - File: preprocess.c - Preprocessor with denoising based on the algorithm by Ephraim and Malah - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - - -/* - Recommended papers: - - Y. Ephraim and D. Malah, "Speech enhancement using minimum mean-square error - short-time spectral amplitude estimator". IEEE Transactions on Acoustics, - Speech and Signal Processing, vol. ASSP-32, no. 6, pp. 1109-1121, 1984. - - Y. Ephraim and D. Malah, "Speech enhancement using minimum mean-square error - log-spectral amplitude estimator". IEEE Transactions on Acoustics, Speech and - Signal Processing, vol. ASSP-33, no. 2, pp. 443-445, 1985. - - I. Cohen and B. Berdugo, "Speech enhancement for non-stationary noise environments". - Signal Processing, vol. 81, no. 2, pp. 2403-2418, 2001. - - Stefan Gustafsson, Rainer Martin, Peter Jax, and Peter Vary. "A psychoacoustic - approach to combined acoustic echo cancellation and noise reduction". IEEE - Transactions on Speech and Audio Processing, 2002. - - J.-M. Valin, J. Rouat, and F. Michaud, "Microphone array post-filter for separation - of simultaneous non-stationary sources". In Proceedings IEEE International - Conference on Acoustics, Speech, and Signal Processing, 2004. -*/ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include -#include "speex/speex_preprocess.h" -#include "speex/speex_echo.h" -#include "arch.h" -#include "fftwrap.h" -#include "filterbank.h" -#include "math_approx.h" -#include "os_support.h" - -#ifndef M_PI -#define M_PI 3.14159263 -#endif - -#define LOUDNESS_EXP 5.f -#define AMP_SCALE .001f -#define AMP_SCALE_1 1000.f - -#define NB_BANDS 24 - -#define SPEECH_PROB_START_DEFAULT QCONST16(0.35f,15) -#define SPEECH_PROB_CONTINUE_DEFAULT QCONST16(0.20f,15) -#define NOISE_SUPPRESS_DEFAULT -15 -#define ECHO_SUPPRESS_DEFAULT -40 -#define ECHO_SUPPRESS_ACTIVE_DEFAULT -15 - -#ifndef NULL -#define NULL 0 -#endif - -#define SQR(x) ((x)*(x)) -#define SQR16(x) (MULT16_16((x),(x))) -#define SQR16_Q15(x) (MULT16_16_Q15((x),(x))) - -#ifdef FIXED_POINT -static inline spx_word16_t DIV32_16_Q8(spx_word32_t a, spx_word32_t b) -{ - if (SHR32(a,7) >= b) - { - return 32767; - } else { - if (b>=QCONST32(1,23)) - { - a = SHR32(a,8); - b = SHR32(b,8); - } - if (b>=QCONST32(1,19)) - { - a = SHR32(a,4); - b = SHR32(b,4); - } - if (b>=QCONST32(1,15)) - { - a = SHR32(a,4); - b = SHR32(b,4); - } - a = SHL32(a,8); - return PDIV32_16(a,b); - } - -} -static inline spx_word16_t DIV32_16_Q15(spx_word32_t a, spx_word32_t b) -{ - if (SHR32(a,15) >= b) - { - return 32767; - } else { - if (b>=QCONST32(1,23)) - { - a = SHR32(a,8); - b = SHR32(b,8); - } - if (b>=QCONST32(1,19)) - { - a = SHR32(a,4); - b = SHR32(b,4); - } - if (b>=QCONST32(1,15)) - { - a = SHR32(a,4); - b = SHR32(b,4); - } - a = SHL32(a,15)-a; - return DIV32_16(a,b); - } -} -#define SNR_SCALING 256.f -#define SNR_SCALING_1 0.0039062f -#define SNR_SHIFT 8 - -#define FRAC_SCALING 32767.f -#define FRAC_SCALING_1 3.0518e-05 -#define FRAC_SHIFT 1 - -#define EXPIN_SCALING 2048.f -#define EXPIN_SCALING_1 0.00048828f -#define EXPIN_SHIFT 11 -#define EXPOUT_SCALING_1 1.5259e-05 - -#define NOISE_SHIFT 7 - -#else - -#define DIV32_16_Q8(a,b) ((a)/(b)) -#define DIV32_16_Q15(a,b) ((a)/(b)) -#define SNR_SCALING 1.f -#define SNR_SCALING_1 1.f -#define SNR_SHIFT 0 -#define FRAC_SCALING 1.f -#define FRAC_SCALING_1 1.f -#define FRAC_SHIFT 0 -#define NOISE_SHIFT 0 - -#define EXPIN_SCALING 1.f -#define EXPIN_SCALING_1 1.f -#define EXPOUT_SCALING_1 1.f - -#endif - -/** Speex pre-processor state. */ -struct SpeexPreprocessState_ { - /* Basic info */ - int frame_size; /**< Number of samples processed each time */ - int ps_size; /**< Number of points in the power spectrum */ - int sampling_rate; /**< Sampling rate of the input/output */ - int nbands; - FilterBank *bank; - - /* Parameters */ - int denoise_enabled; - int vad_enabled; - int dereverb_enabled; - spx_word16_t reverb_decay; - spx_word16_t reverb_level; - spx_word16_t speech_prob_start; - spx_word16_t speech_prob_continue; - int noise_suppress; - int echo_suppress; - int echo_suppress_active; - SpeexEchoState *echo_state; - - spx_word16_t speech_prob; /**< Probability last frame was speech */ - - /* DSP-related arrays */ - spx_word16_t *frame; /**< Processing frame (2*ps_size) */ - spx_word16_t *ft; /**< Processing frame in freq domain (2*ps_size) */ - spx_word32_t *ps; /**< Current power spectrum */ - spx_word16_t *gain2; /**< Adjusted gains */ - spx_word16_t *gain_floor; /**< Minimum gain allowed */ - spx_word16_t *window; /**< Analysis/Synthesis window */ - spx_word32_t *noise; /**< Noise estimate */ - spx_word32_t *reverb_estimate; /**< Estimate of reverb energy */ - spx_word32_t *old_ps; /**< Power spectrum for last frame */ - spx_word16_t *gain; /**< Ephraim Malah gain */ - spx_word16_t *prior; /**< A-priori SNR */ - spx_word16_t *post; /**< A-posteriori SNR */ - - spx_word32_t *S; /**< Smoothed power spectrum */ - spx_word32_t *Smin; /**< See Cohen paper */ - spx_word32_t *Stmp; /**< See Cohen paper */ - int *update_prob; /**< Probability of speech presence for noise update */ - - spx_word16_t *zeta; /**< Smoothed a priori SNR */ - spx_word32_t *echo_noise; - spx_word32_t *residual_echo; - - /* Misc */ - spx_word16_t *inbuf; /**< Input buffer (overlapped analysis) */ - spx_word16_t *outbuf; /**< Output buffer (for overlap and add) */ - - /* AGC stuff, only for floating point for now */ -#ifndef FIXED_POINT - int agc_enabled; - float agc_level; - float loudness_accum; - float *loudness_weight; /**< Perceptual loudness curve */ - float loudness; /**< Loudness estimate */ - float agc_gain; /**< Current AGC gain */ - float max_gain; /**< Maximum gain allowed */ - float max_increase_step; /**< Maximum increase in gain from one frame to another */ - float max_decrease_step; /**< Maximum decrease in gain from one frame to another */ - float prev_loudness; /**< Loudness of previous frame */ - float init_max; /**< Current gain limit during initialisation */ -#endif - int nb_adapt; /**< Number of frames used for adaptation so far */ - int was_speech; - int min_count; /**< Number of frames processed so far */ - void *fft_lookup; /**< Lookup table for the FFT */ -#ifdef FIXED_POINT - int frame_shift; -#endif -}; - - -static void conj_window(spx_word16_t *w, int len) -{ - int i; - for (i=0;i19) - return ADD32(EXTEND32(Q15_ONE),EXTEND32(DIV32_16(QCONST32(.1296,23), SHR32(xx,EXPIN_SHIFT-SNR_SHIFT)))); - frac = SHL32(xx-SHL32(ind,10),5); - return SHL32(DIV32_16(PSHR32(MULT16_16(Q15_ONE-frac,table[ind]) + MULT16_16(frac,table[ind+1]),7),(spx_sqrt(SHL32(xx,15)+6711))),7); -} - -static inline spx_word16_t qcurve(spx_word16_t x) -{ - x = MAX16(x, 1); - return DIV32_16(SHL32(EXTEND32(32767),9),ADD16(512,MULT16_16_Q15(QCONST16(.60f,15),DIV32_16(32767,x)))); -} - -/* Compute the gain floor based on different floors for the background noise and residual echo */ -static void compute_gain_floor(int noise_suppress, int effective_echo_suppress, spx_word32_t *noise, spx_word32_t *echo, spx_word16_t *gain_floor, int len) -{ - int i; - - if (noise_suppress > effective_echo_suppress) - { - spx_word16_t noise_gain, gain_ratio; - noise_gain = EXTRACT16(MIN32(Q15_ONE,SHR32(spx_exp(MULT16_16(QCONST16(0.11513,11),noise_suppress)),1))); - gain_ratio = EXTRACT16(MIN32(Q15_ONE,SHR32(spx_exp(MULT16_16(QCONST16(.2302585f,11),effective_echo_suppress-noise_suppress)),1))); - - /* gain_floor = sqrt [ (noise*noise_floor + echo*echo_floor) / (noise+echo) ] */ - for (i=0;i19) - return FRAC_SCALING*(1+.1296/x); - frac = 2*x-integer; - return FRAC_SCALING*((1-frac)*table[ind] + frac*table[ind+1])/sqrt(x+.0001f); -} - -static inline spx_word16_t qcurve(spx_word16_t x) -{ - return 1.f/(1.f+.15f/(SNR_SCALING_1*x)); -} - -static void compute_gain_floor(int noise_suppress, int effective_echo_suppress, spx_word32_t *noise, spx_word32_t *echo, spx_word16_t *gain_floor, int len) -{ - int i; - float echo_floor; - float noise_floor; - - noise_floor = exp(.2302585f*noise_suppress); - echo_floor = exp(.2302585f*effective_echo_suppress); - - /* Compute the gain floor based on different floors for the background noise and residual echo */ - for (i=0;iframe_size = frame_size; - - /* Round ps_size down to the nearest power of two */ -#if 0 - i=1; - st->ps_size = st->frame_size; - while(1) - { - if (st->ps_size & ~i) - { - st->ps_size &= ~i; - i<<=1; - } else { - break; - } - } - - - if (st->ps_size < 3*st->frame_size/4) - st->ps_size = st->ps_size * 3 / 2; -#else - st->ps_size = st->frame_size; -#endif - - N = st->ps_size; - N3 = 2*N - st->frame_size; - N4 = st->frame_size - N3; - - st->sampling_rate = sampling_rate; - st->denoise_enabled = 1; - st->vad_enabled = 0; - st->dereverb_enabled = 0; - st->reverb_decay = 0; - st->reverb_level = 0; - st->noise_suppress = NOISE_SUPPRESS_DEFAULT; - st->echo_suppress = ECHO_SUPPRESS_DEFAULT; - st->echo_suppress_active = ECHO_SUPPRESS_ACTIVE_DEFAULT; - - st->speech_prob_start = SPEECH_PROB_START_DEFAULT; - st->speech_prob_continue = SPEECH_PROB_CONTINUE_DEFAULT; - - st->echo_state = NULL; - - st->nbands = NB_BANDS; - M = st->nbands; - st->bank = filterbank_new(M, sampling_rate, N, 1); - - st->frame = (spx_word16_t*)speex_alloc(2*N*sizeof(spx_word16_t)); - st->window = (spx_word16_t*)speex_alloc(2*N*sizeof(spx_word16_t)); - st->ft = (spx_word16_t*)speex_alloc(2*N*sizeof(spx_word16_t)); - - st->ps = (spx_word32_t*)speex_alloc((N+M)*sizeof(spx_word32_t)); - st->noise = (spx_word32_t*)speex_alloc((N+M)*sizeof(spx_word32_t)); - st->echo_noise = (spx_word32_t*)speex_alloc((N+M)*sizeof(spx_word32_t)); - st->residual_echo = (spx_word32_t*)speex_alloc((N+M)*sizeof(spx_word32_t)); - st->reverb_estimate = (spx_word32_t*)speex_alloc((N+M)*sizeof(spx_word32_t)); - st->old_ps = (spx_word32_t*)speex_alloc((N+M)*sizeof(spx_word32_t)); - st->prior = (spx_word16_t*)speex_alloc((N+M)*sizeof(spx_word16_t)); - st->post = (spx_word16_t*)speex_alloc((N+M)*sizeof(spx_word16_t)); - st->gain = (spx_word16_t*)speex_alloc((N+M)*sizeof(spx_word16_t)); - st->gain2 = (spx_word16_t*)speex_alloc((N+M)*sizeof(spx_word16_t)); - st->gain_floor = (spx_word16_t*)speex_alloc((N+M)*sizeof(spx_word16_t)); - st->zeta = (spx_word16_t*)speex_alloc((N+M)*sizeof(spx_word16_t)); - - st->S = (spx_word32_t*)speex_alloc(N*sizeof(spx_word32_t)); - st->Smin = (spx_word32_t*)speex_alloc(N*sizeof(spx_word32_t)); - st->Stmp = (spx_word32_t*)speex_alloc(N*sizeof(spx_word32_t)); - st->update_prob = (int*)speex_alloc(N*sizeof(int)); - - st->inbuf = (spx_word16_t*)speex_alloc(N3*sizeof(spx_word16_t)); - st->outbuf = (spx_word16_t*)speex_alloc(N3*sizeof(spx_word16_t)); - - conj_window(st->window, 2*N3); - for (i=2*N3;i<2*st->ps_size;i++) - st->window[i]=Q15_ONE; - - if (N4>0) - { - for (i=N3-1;i>=0;i--) - { - st->window[i+N3+N4]=st->window[i+N3]; - st->window[i+N3]=1; - } - } - for (i=0;inoise[i]=QCONST32(1.f,NOISE_SHIFT); - st->reverb_estimate[i]=0; - st->old_ps[i]=1; - st->gain[i]=Q15_ONE; - st->post[i]=SHL16(1, SNR_SHIFT); - st->prior[i]=SHL16(1, SNR_SHIFT); - } - - for (i=0;iupdate_prob[i] = 1; - for (i=0;iinbuf[i]=0; - st->outbuf[i]=0; - } -#ifndef FIXED_POINT - st->agc_enabled = 0; - st->agc_level = 8000; - st->loudness_weight = (float*)speex_alloc(N*sizeof(float)); - for (i=0;iloudness_weight[i] = .5f*(1.f/(1.f+ff/8000.f))+1.f*exp(-.5f*(ff-3800.f)*(ff-3800.f)/9e5f);*/ - st->loudness_weight[i] = .35f-.35f*ff/16000.f+.73f*exp(-.5f*(ff-3800)*(ff-3800)/9e5f); - if (st->loudness_weight[i]<.01f) - st->loudness_weight[i]=.01f; - st->loudness_weight[i] *= st->loudness_weight[i]; - } - /*st->loudness = pow(AMP_SCALE*st->agc_level,LOUDNESS_EXP);*/ - st->loudness = 1e-15; - st->agc_gain = 1; - st->max_gain = 30; - st->max_increase_step = exp(0.11513f * 12.*st->frame_size / st->sampling_rate); - st->max_decrease_step = exp(-0.11513f * 40.*st->frame_size / st->sampling_rate); - st->prev_loudness = 1; - st->init_max = 1; -#endif - st->was_speech = 0; - - st->fft_lookup = spx_fft_init(2*N); - - st->nb_adapt=0; - st->min_count=0; - return st; -} - -EXPORT void speex_preprocess_state_destroy(SpeexPreprocessState *st) -{ - speex_free(st->frame); - speex_free(st->ft); - speex_free(st->ps); - speex_free(st->gain2); - speex_free(st->gain_floor); - speex_free(st->window); - speex_free(st->noise); - speex_free(st->reverb_estimate); - speex_free(st->old_ps); - speex_free(st->gain); - speex_free(st->prior); - speex_free(st->post); -#ifndef FIXED_POINT - speex_free(st->loudness_weight); -#endif - speex_free(st->echo_noise); - speex_free(st->residual_echo); - - speex_free(st->S); - speex_free(st->Smin); - speex_free(st->Stmp); - speex_free(st->update_prob); - speex_free(st->zeta); - - speex_free(st->inbuf); - speex_free(st->outbuf); - - spx_fft_destroy(st->fft_lookup); - filterbank_destroy(st->bank); - speex_free(st); -} - -/* FIXME: The AGC doesn't work yet with fixed-point*/ -#ifndef FIXED_POINT -static void speex_compute_agc(SpeexPreprocessState *st, spx_word16_t Pframe, spx_word16_t *ft) -{ - int i; - int N = st->ps_size; - float target_gain; - float loudness=1.f; - float rate; - - for (i=2;ips[i]* st->loudness_weight[i]; - } - loudness=sqrt(loudness); - /*if (loudness < 2*pow(st->loudness, 1.0/LOUDNESS_EXP) && - loudness*2 > pow(st->loudness, 1.0/LOUDNESS_EXP))*/ - if (Pframe>.3f) - { - /*rate=2.0f*Pframe*Pframe/(1+st->nb_loudness_adapt);*/ - rate = .03*Pframe*Pframe; - st->loudness = (1-rate)*st->loudness + (rate)*pow(AMP_SCALE*loudness, LOUDNESS_EXP); - st->loudness_accum = (1-rate)*st->loudness_accum + rate; - if (st->init_max < st->max_gain && st->nb_adapt > 20) - st->init_max *= 1.f + .1f*Pframe*Pframe; - } - /*printf ("%f %f %f %f\n", Pframe, loudness, pow(st->loudness, 1.0f/LOUDNESS_EXP), st->loudness2);*/ - - target_gain = AMP_SCALE*st->agc_level*pow(st->loudness/(1e-4+st->loudness_accum), -1.0f/LOUDNESS_EXP); - - if ((Pframe>.5 && st->nb_adapt > 20) || target_gain < st->agc_gain) - { - if (target_gain > st->max_increase_step*st->agc_gain) - target_gain = st->max_increase_step*st->agc_gain; - if (target_gain < st->max_decrease_step*st->agc_gain && loudness < 10*st->prev_loudness) - target_gain = st->max_decrease_step*st->agc_gain; - if (target_gain > st->max_gain) - target_gain = st->max_gain; - if (target_gain > st->init_max) - target_gain = st->init_max; - - st->agc_gain = target_gain; - } - /*fprintf (stderr, "%f %f %f\n", loudness, (float)AMP_SCALE_1*pow(st->loudness, 1.0f/LOUDNESS_EXP), st->agc_gain);*/ - - for (i=0;i<2*N;i++) - ft[i] *= st->agc_gain; - st->prev_loudness = loudness; -} -#endif - -static void preprocess_analysis(SpeexPreprocessState *st, spx_int16_t *x) -{ - int i; - int N = st->ps_size; - int N3 = 2*N - st->frame_size; - int N4 = st->frame_size - N3; - spx_word32_t *ps=st->ps; - - /* 'Build' input frame */ - for (i=0;iframe[i]=st->inbuf[i]; - for (i=0;iframe_size;i++) - st->frame[N3+i]=x[i]; - - /* Update inbuf */ - for (i=0;iinbuf[i]=x[N4+i]; - - /* Windowing */ - for (i=0;i<2*N;i++) - st->frame[i] = MULT16_16_Q15(st->frame[i], st->window[i]); - -#ifdef FIXED_POINT - { - spx_word16_t max_val=0; - for (i=0;i<2*N;i++) - max_val = MAX16(max_val, ABS16(st->frame[i])); - st->frame_shift = 14-spx_ilog2(EXTEND32(max_val)); - for (i=0;i<2*N;i++) - st->frame[i] = SHL16(st->frame[i], st->frame_shift); - } -#endif - - /* Perform FFT */ - spx_fft(st->fft_lookup, st->frame, st->ft); - - /* Power spectrum */ - ps[0]=MULT16_16(st->ft[0],st->ft[0]); - for (i=1;ift[2*i-1],st->ft[2*i-1]) + MULT16_16(st->ft[2*i],st->ft[2*i]); - for (i=0;ips[i] = PSHR32(st->ps[i], 2*st->frame_shift); - - filterbank_compute_bank32(st->bank, ps, ps+N); -} - -static void update_noise_prob(SpeexPreprocessState *st) -{ - int i; - int min_range; - int N = st->ps_size; - - for (i=1;iS[i] = MULT16_32_Q15(QCONST16(.8f,15),st->S[i]) + MULT16_32_Q15(QCONST16(.05f,15),st->ps[i-1]) - + MULT16_32_Q15(QCONST16(.1f,15),st->ps[i]) + MULT16_32_Q15(QCONST16(.05f,15),st->ps[i+1]); - st->S[0] = MULT16_32_Q15(QCONST16(.8f,15),st->S[0]) + MULT16_32_Q15(QCONST16(.2f,15),st->ps[0]); - st->S[N-1] = MULT16_32_Q15(QCONST16(.8f,15),st->S[N-1]) + MULT16_32_Q15(QCONST16(.2f,15),st->ps[N-1]); - - if (st->nb_adapt==1) - { - for (i=0;iSmin[i] = st->Stmp[i] = 0; - } - - if (st->nb_adapt < 100) - min_range = 15; - else if (st->nb_adapt < 1000) - min_range = 50; - else if (st->nb_adapt < 10000) - min_range = 150; - else - min_range = 300; - if (st->min_count > min_range) - { - st->min_count = 0; - for (i=0;iSmin[i] = MIN32(st->Stmp[i], st->S[i]); - st->Stmp[i] = st->S[i]; - } - } else { - for (i=0;iSmin[i] = MIN32(st->Smin[i], st->S[i]); - st->Stmp[i] = MIN32(st->Stmp[i], st->S[i]); - } - } - for (i=0;iS[i]) > st->Smin[i]) - st->update_prob[i] = 1; - else - st->update_prob[i] = 0; - /*fprintf (stderr, "%f ", st->S[i]/st->Smin[i]);*/ - /*fprintf (stderr, "%f ", st->update_prob[i]);*/ - } - -} - -#define NOISE_OVERCOMPENS 1. - -void speex_echo_get_residual(SpeexEchoState *st, spx_word32_t *Yout, int len); - -EXPORT int speex_preprocess(SpeexPreprocessState *st, spx_int16_t *x, spx_int32_t *echo) -{ - return speex_preprocess_run(st, x); -} - -EXPORT int speex_preprocess_run(SpeexPreprocessState *st, spx_int16_t *x) -{ - int i; - int M; - int N = st->ps_size; - int N3 = 2*N - st->frame_size; - int N4 = st->frame_size - N3; - spx_word32_t *ps=st->ps; - spx_word32_t Zframe; - spx_word16_t Pframe; - spx_word16_t beta, beta_1; - spx_word16_t effective_echo_suppress; - - st->nb_adapt++; - if (st->nb_adapt>20000) - st->nb_adapt = 20000; - st->min_count++; - - beta = MAX16(QCONST16(.03,15),DIV32_16(Q15_ONE,st->nb_adapt)); - beta_1 = Q15_ONE-beta; - M = st->nbands; - /* Deal with residual echo if provided */ - if (st->echo_state) - { - speex_echo_get_residual(st->echo_state, st->residual_echo, N); -#ifndef FIXED_POINT - /* If there are NaNs or ridiculous values, it'll show up in the DC and we just reset everything to zero */ - if (!(st->residual_echo[0] >=0 && st->residual_echo[0]residual_echo[i] = 0; - } -#endif - for (i=0;iecho_noise[i] = MAX32(MULT16_32_Q15(QCONST16(.6f,15),st->echo_noise[i]), st->residual_echo[i]); - filterbank_compute_bank32(st->bank, st->echo_noise, st->echo_noise+N); - } else { - for (i=0;iecho_noise[i] = 0; - } - preprocess_analysis(st, x); - - update_noise_prob(st); - - /* Noise estimation always updated for the 10 first frames */ - /*if (st->nb_adapt<10) - { - for (i=1;iupdate_prob[i] = 0; - } - */ - - /* Update the noise estimate for the frequencies where it can be */ - for (i=0;iupdate_prob[i] || st->ps[i] < PSHR32(st->noise[i], NOISE_SHIFT)) - st->noise[i] = MAX32(EXTEND32(0),MULT16_32_Q15(beta_1,st->noise[i]) + MULT16_32_Q15(beta,SHL32(st->ps[i],NOISE_SHIFT))); - } - filterbank_compute_bank32(st->bank, st->noise, st->noise+N); - - /* Special case for first frame */ - if (st->nb_adapt==1) - for (i=0;iold_ps[i] = ps[i]; - - /* Compute a posteriori SNR */ - for (i=0;inoise[i],NOISE_SHIFT)) , st->echo_noise[i]) , st->reverb_estimate[i]); - - /* A posteriori SNR = ps/noise - 1*/ - st->post[i] = SUB16(DIV32_16_Q8(ps[i],tot_noise), QCONST16(1.f,SNR_SHIFT)); - st->post[i]=MIN16(st->post[i], QCONST16(100.f,SNR_SHIFT)); - - /* Computing update gamma = .1 + .9*(old/(old+noise))^2 */ - gamma = QCONST16(.1f,15)+MULT16_16_Q15(QCONST16(.89f,15),SQR16_Q15(DIV32_16_Q15(st->old_ps[i],ADD32(st->old_ps[i],tot_noise)))); - - /* A priori SNR update = gamma*max(0,post) + (1-gamma)*old/noise */ - st->prior[i] = EXTRACT16(PSHR32(ADD32(MULT16_16(gamma,MAX16(0,st->post[i])), MULT16_16(Q15_ONE-gamma,DIV32_16_Q8(st->old_ps[i],tot_noise))), 15)); - st->prior[i]=MIN16(st->prior[i], QCONST16(100.f,SNR_SHIFT)); - } - - /*print_vec(st->post, N+M, "");*/ - - /* Recursive average of the a priori SNR. A bit smoothed for the psd components */ - st->zeta[0] = PSHR32(ADD32(MULT16_16(QCONST16(.7f,15),st->zeta[0]), MULT16_16(QCONST16(.3f,15),st->prior[0])),15); - for (i=1;izeta[i] = PSHR32(ADD32(ADD32(ADD32(MULT16_16(QCONST16(.7f,15),st->zeta[i]), MULT16_16(QCONST16(.15f,15),st->prior[i])), - MULT16_16(QCONST16(.075f,15),st->prior[i-1])), MULT16_16(QCONST16(.075f,15),st->prior[i+1])),15); - for (i=N-1;izeta[i] = PSHR32(ADD32(MULT16_16(QCONST16(.7f,15),st->zeta[i]), MULT16_16(QCONST16(.3f,15),st->prior[i])),15); - - /* Speech probability of presence for the entire frame is based on the average filterbank a priori SNR */ - Zframe = 0; - for (i=N;izeta[i])); - Pframe = QCONST16(.1f,15)+MULT16_16_Q15(QCONST16(.899f,15),qcurve(DIV32_16(Zframe,st->nbands))); - - effective_echo_suppress = EXTRACT16(PSHR32(ADD32(MULT16_16(SUB16(Q15_ONE,Pframe), st->echo_suppress), MULT16_16(Pframe, st->echo_suppress_active)),15)); - - compute_gain_floor(st->noise_suppress, effective_echo_suppress, st->noise+N, st->echo_noise+N, st->gain_floor+N, M); - - /* Compute Ephraim & Malah gain speech probability of presence for each critical band (Bark scale) - Technically this is actually wrong because the EM gaim assumes a slightly different probability - distribution */ - for (i=N;iprior[i]), 15), ADD16(st->prior[i], SHL32(1,SNR_SHIFT))); - theta = MULT16_32_P15(prior_ratio, QCONST32(1.f,EXPIN_SHIFT)+SHL32(EXTEND32(st->post[i]),EXPIN_SHIFT-SNR_SHIFT)); - - MM = hypergeom_gain(theta); - /* Gain with bound */ - st->gain[i] = EXTRACT16(MIN32(Q15_ONE, MULT16_32_Q15(prior_ratio, MM))); - /* Save old Bark power spectrum */ - st->old_ps[i] = MULT16_32_P15(QCONST16(.2f,15),st->old_ps[i]) + MULT16_32_P15(MULT16_16_P15(QCONST16(.8f,15),SQR16_Q15(st->gain[i])),ps[i]); - - P1 = QCONST16(.199f,15)+MULT16_16_Q15(QCONST16(.8f,15),qcurve (st->zeta[i])); - q = Q15_ONE-MULT16_16_Q15(Pframe,P1); -#ifdef FIXED_POINT - theta = MIN32(theta, EXTEND32(32767)); -/*Q8*/tmp = MULT16_16_Q15((SHL32(1,SNR_SHIFT)+st->prior[i]),EXTRACT16(MIN32(Q15ONE,SHR32(spx_exp(-EXTRACT16(theta)),1)))); - tmp = MIN16(QCONST16(3.,SNR_SHIFT), tmp); /* Prevent overflows in the next line*/ -/*Q8*/tmp = EXTRACT16(PSHR32(MULT16_16(PDIV32_16(SHL32(EXTEND32(q),8),(Q15_ONE-q)),tmp),8)); - st->gain2[i]=DIV32_16(SHL32(EXTEND32(32767),SNR_SHIFT), ADD16(256,tmp)); -#else - st->gain2[i]=1/(1.f + (q/(1.f-q))*(1+st->prior[i])*exp(-theta)); -#endif - } - /* Convert the EM gains and speech prob to linear frequency */ - filterbank_compute_psd16(st->bank,st->gain2+N, st->gain2); - filterbank_compute_psd16(st->bank,st->gain+N, st->gain); - - /* Use 1 for linear gain resolution (best) or 0 for Bark gain resolution (faster) */ - if (1) - { - filterbank_compute_psd16(st->bank,st->gain_floor+N, st->gain_floor); - - /* Compute gain according to the Ephraim-Malah algorithm -- linear frequency */ - for (i=0;iprior[i]), 15), ADD16(st->prior[i], SHL32(1,SNR_SHIFT))); - theta = MULT16_32_P15(prior_ratio, QCONST32(1.f,EXPIN_SHIFT)+SHL32(EXTEND32(st->post[i]),EXPIN_SHIFT-SNR_SHIFT)); - - /* Optimal estimator for loudness domain */ - MM = hypergeom_gain(theta); - /* EM gain with bound */ - g = EXTRACT16(MIN32(Q15_ONE, MULT16_32_Q15(prior_ratio, MM))); - /* Interpolated speech probability of presence */ - p = st->gain2[i]; - - /* Constrain the gain to be close to the Bark scale gain */ - if (MULT16_16_Q15(QCONST16(.333f,15),g) > st->gain[i]) - g = MULT16_16(3,st->gain[i]); - st->gain[i] = g; - - /* Save old power spectrum */ - st->old_ps[i] = MULT16_32_P15(QCONST16(.2f,15),st->old_ps[i]) + MULT16_32_P15(MULT16_16_P15(QCONST16(.8f,15),SQR16_Q15(st->gain[i])),ps[i]); - - /* Apply gain floor */ - if (st->gain[i] < st->gain_floor[i]) - st->gain[i] = st->gain_floor[i]; - - /* Exponential decay model for reverberation (unused) */ - /*st->reverb_estimate[i] = st->reverb_decay*st->reverb_estimate[i] + st->reverb_decay*st->reverb_level*st->gain[i]*st->gain[i]*st->ps[i];*/ - - /* Take into account speech probability of presence (loudness domain MMSE estimator) */ - /* gain2 = [p*sqrt(gain)+(1-p)*sqrt(gain _floor) ]^2 */ - tmp = MULT16_16_P15(p,spx_sqrt(SHL32(EXTEND32(st->gain[i]),15))) + MULT16_16_P15(SUB16(Q15_ONE,p),spx_sqrt(SHL32(EXTEND32(st->gain_floor[i]),15))); - st->gain2[i]=SQR16_Q15(tmp); - - /* Use this if you want a log-domain MMSE estimator instead */ - /*st->gain2[i] = pow(st->gain[i], p) * pow(st->gain_floor[i],1.f-p);*/ - } - } else { - for (i=N;igain2[i]; - st->gain[i] = MAX16(st->gain[i], st->gain_floor[i]); - tmp = MULT16_16_P15(p,spx_sqrt(SHL32(EXTEND32(st->gain[i]),15))) + MULT16_16_P15(SUB16(Q15_ONE,p),spx_sqrt(SHL32(EXTEND32(st->gain_floor[i]),15))); - st->gain2[i]=SQR16_Q15(tmp); - } - filterbank_compute_psd16(st->bank,st->gain2+N, st->gain2); - } - - /* If noise suppression is off, don't apply the gain (but then why call this in the first place!) */ - if (!st->denoise_enabled) - { - for (i=0;igain2[i]=Q15_ONE; - } - - /* Apply computed gain */ - for (i=1;ift[2*i-1] = MULT16_16_P15(st->gain2[i],st->ft[2*i-1]); - st->ft[2*i] = MULT16_16_P15(st->gain2[i],st->ft[2*i]); - } - st->ft[0] = MULT16_16_P15(st->gain2[0],st->ft[0]); - st->ft[2*N-1] = MULT16_16_P15(st->gain2[N-1],st->ft[2*N-1]); - - /*FIXME: This *will* not work for fixed-point */ -#ifndef FIXED_POINT - if (st->agc_enabled) - speex_compute_agc(st, Pframe, st->ft); -#endif - - /* Inverse FFT with 1/N scaling */ - spx_ifft(st->fft_lookup, st->ft, st->frame); - /* Scale back to original (lower) amplitude */ - for (i=0;i<2*N;i++) - st->frame[i] = PSHR16(st->frame[i], st->frame_shift); - - /*FIXME: This *will* not work for fixed-point */ -#ifndef FIXED_POINT - if (st->agc_enabled) - { - float max_sample=0; - for (i=0;i<2*N;i++) - if (fabs(st->frame[i])>max_sample) - max_sample = fabs(st->frame[i]); - if (max_sample>28000.f) - { - float damp = 28000.f/max_sample; - for (i=0;i<2*N;i++) - st->frame[i] *= damp; - } - } -#endif - - /* Synthesis window (for WOLA) */ - for (i=0;i<2*N;i++) - st->frame[i] = MULT16_16_Q15(st->frame[i], st->window[i]); - - /* Perform overlap and add */ - for (i=0;ioutbuf[i] + st->frame[i]; - for (i=0;iframe[N3+i]; - - /* Update outbuf */ - for (i=0;ioutbuf[i] = st->frame[st->frame_size+i]; - - /* FIXME: This VAD is a kludge */ - st->speech_prob = Pframe; - if (st->vad_enabled) - { - if (st->speech_prob > st->speech_prob_start || (st->was_speech && st->speech_prob > st->speech_prob_continue)) - { - st->was_speech=1; - return 1; - } else - { - st->was_speech=0; - return 0; - } - } else { - return 1; - } -} - -EXPORT void speex_preprocess_estimate_update(SpeexPreprocessState *st, spx_int16_t *x) -{ - int i; - int N = st->ps_size; - int N3 = 2*N - st->frame_size; - int M; - spx_word32_t *ps=st->ps; - - M = st->nbands; - st->min_count++; - - preprocess_analysis(st, x); - - update_noise_prob(st); - - for (i=1;iupdate_prob[i] || st->ps[i] < PSHR32(st->noise[i],NOISE_SHIFT)) - { - st->noise[i] = MULT16_32_Q15(QCONST16(.95f,15),st->noise[i]) + MULT16_32_Q15(QCONST16(.05f,15),SHL32(st->ps[i],NOISE_SHIFT)); - } - } - - for (i=0;ioutbuf[i] = MULT16_16_Q15(x[st->frame_size-N3+i],st->window[st->frame_size+i]); - - /* Save old power spectrum */ - for (i=0;iold_ps[i] = ps[i]; - - for (i=0;ireverb_estimate[i] = MULT16_32_Q15(st->reverb_decay, st->reverb_estimate[i]); -} - - -EXPORT int speex_preprocess_ctl(SpeexPreprocessState *state, int request, void *ptr) -{ - int i; - SpeexPreprocessState *st; - st=(SpeexPreprocessState*)state; - switch(request) - { - case SPEEX_PREPROCESS_SET_DENOISE: - st->denoise_enabled = (*(spx_int32_t*)ptr); - break; - case SPEEX_PREPROCESS_GET_DENOISE: - (*(spx_int32_t*)ptr) = st->denoise_enabled; - break; -#ifndef FIXED_POINT - case SPEEX_PREPROCESS_SET_AGC: - st->agc_enabled = (*(spx_int32_t*)ptr); - break; - case SPEEX_PREPROCESS_GET_AGC: - (*(spx_int32_t*)ptr) = st->agc_enabled; - break; -#ifndef DISABLE_FLOAT_API - case SPEEX_PREPROCESS_SET_AGC_LEVEL: - st->agc_level = (*(float*)ptr); - if (st->agc_level<1) - st->agc_level=1; - if (st->agc_level>32768) - st->agc_level=32768; - break; - case SPEEX_PREPROCESS_GET_AGC_LEVEL: - (*(float*)ptr) = st->agc_level; - break; -#endif /* #ifndef DISABLE_FLOAT_API */ - case SPEEX_PREPROCESS_SET_AGC_INCREMENT: - st->max_increase_step = exp(0.11513f * (*(spx_int32_t*)ptr)*st->frame_size / st->sampling_rate); - break; - case SPEEX_PREPROCESS_GET_AGC_INCREMENT: - (*(spx_int32_t*)ptr) = floor(.5+8.6858*log(st->max_increase_step)*st->sampling_rate/st->frame_size); - break; - case SPEEX_PREPROCESS_SET_AGC_DECREMENT: - st->max_decrease_step = exp(0.11513f * (*(spx_int32_t*)ptr)*st->frame_size / st->sampling_rate); - break; - case SPEEX_PREPROCESS_GET_AGC_DECREMENT: - (*(spx_int32_t*)ptr) = floor(.5+8.6858*log(st->max_decrease_step)*st->sampling_rate/st->frame_size); - break; - case SPEEX_PREPROCESS_SET_AGC_MAX_GAIN: - st->max_gain = exp(0.11513f * (*(spx_int32_t*)ptr)); - break; - case SPEEX_PREPROCESS_GET_AGC_MAX_GAIN: - (*(spx_int32_t*)ptr) = floor(.5+8.6858*log(st->max_gain)); - break; -#endif - case SPEEX_PREPROCESS_SET_VAD: - speex_warning("The VAD has been replaced by a hack pending a complete rewrite"); - st->vad_enabled = (*(spx_int32_t*)ptr); - break; - case SPEEX_PREPROCESS_GET_VAD: - (*(spx_int32_t*)ptr) = st->vad_enabled; - break; - - case SPEEX_PREPROCESS_SET_DEREVERB: - st->dereverb_enabled = (*(spx_int32_t*)ptr); - for (i=0;ips_size;i++) - st->reverb_estimate[i]=0; - break; - case SPEEX_PREPROCESS_GET_DEREVERB: - (*(spx_int32_t*)ptr) = st->dereverb_enabled; - break; - - case SPEEX_PREPROCESS_SET_DEREVERB_LEVEL: - /* FIXME: Re-enable when de-reverberation is actually enabled again */ - /*st->reverb_level = (*(float*)ptr);*/ - break; - case SPEEX_PREPROCESS_GET_DEREVERB_LEVEL: - /* FIXME: Re-enable when de-reverberation is actually enabled again */ - /*(*(float*)ptr) = st->reverb_level;*/ - break; - - case SPEEX_PREPROCESS_SET_DEREVERB_DECAY: - /* FIXME: Re-enable when de-reverberation is actually enabled again */ - /*st->reverb_decay = (*(float*)ptr);*/ - break; - case SPEEX_PREPROCESS_GET_DEREVERB_DECAY: - /* FIXME: Re-enable when de-reverberation is actually enabled again */ - /*(*(float*)ptr) = st->reverb_decay;*/ - break; - - case SPEEX_PREPROCESS_SET_PROB_START: - *(spx_int32_t*)ptr = MIN32(100,MAX32(0, *(spx_int32_t*)ptr)); - st->speech_prob_start = DIV32_16(MULT16_16(Q15ONE,*(spx_int32_t*)ptr), 100); - break; - case SPEEX_PREPROCESS_GET_PROB_START: - (*(spx_int32_t*)ptr) = MULT16_16_Q15(st->speech_prob_start, 100); - break; - - case SPEEX_PREPROCESS_SET_PROB_CONTINUE: - *(spx_int32_t*)ptr = MIN32(100,MAX32(0, *(spx_int32_t*)ptr)); - st->speech_prob_continue = DIV32_16(MULT16_16(Q15ONE,*(spx_int32_t*)ptr), 100); - break; - case SPEEX_PREPROCESS_GET_PROB_CONTINUE: - (*(spx_int32_t*)ptr) = MULT16_16_Q15(st->speech_prob_continue, 100); - break; - - case SPEEX_PREPROCESS_SET_NOISE_SUPPRESS: - st->noise_suppress = -ABS(*(spx_int32_t*)ptr); - break; - case SPEEX_PREPROCESS_GET_NOISE_SUPPRESS: - (*(spx_int32_t*)ptr) = st->noise_suppress; - break; - case SPEEX_PREPROCESS_SET_ECHO_SUPPRESS: - st->echo_suppress = -ABS(*(spx_int32_t*)ptr); - break; - case SPEEX_PREPROCESS_GET_ECHO_SUPPRESS: - (*(spx_int32_t*)ptr) = st->echo_suppress; - break; - case SPEEX_PREPROCESS_SET_ECHO_SUPPRESS_ACTIVE: - st->echo_suppress_active = -ABS(*(spx_int32_t*)ptr); - break; - case SPEEX_PREPROCESS_GET_ECHO_SUPPRESS_ACTIVE: - (*(spx_int32_t*)ptr) = st->echo_suppress_active; - break; - case SPEEX_PREPROCESS_SET_ECHO_STATE: - st->echo_state = (SpeexEchoState*)ptr; - break; - case SPEEX_PREPROCESS_GET_ECHO_STATE: - (*(SpeexEchoState**)ptr) = (SpeexEchoState*)st->echo_state; - break; -#ifndef FIXED_POINT - case SPEEX_PREPROCESS_GET_AGC_LOUDNESS: - (*(spx_int32_t*)ptr) = pow(st->loudness, 1.0/LOUDNESS_EXP); - break; - case SPEEX_PREPROCESS_GET_AGC_GAIN: - (*(spx_int32_t*)ptr) = floor(.5+8.6858*log(st->agc_gain)); - break; -#endif - case SPEEX_PREPROCESS_GET_PSD_SIZE: - case SPEEX_PREPROCESS_GET_NOISE_PSD_SIZE: - (*(spx_int32_t*)ptr) = st->ps_size; - break; - case SPEEX_PREPROCESS_GET_PSD: - for(i=0;ips_size;i++) - ((spx_int32_t *)ptr)[i] = (spx_int32_t) st->ps[i]; - break; - case SPEEX_PREPROCESS_GET_NOISE_PSD: - for(i=0;ips_size;i++) - ((spx_int32_t *)ptr)[i] = (spx_int32_t) PSHR32(st->noise[i], NOISE_SHIFT); - break; - case SPEEX_PREPROCESS_GET_PROB: - (*(spx_int32_t*)ptr) = MULT16_16_Q15(st->speech_prob, 100); - break; -#ifndef FIXED_POINT - case SPEEX_PREPROCESS_SET_AGC_TARGET: - st->agc_level = (*(spx_int32_t*)ptr); - if (st->agc_level<1) - st->agc_level=1; - if (st->agc_level>32768) - st->agc_level=32768; - break; - case SPEEX_PREPROCESS_GET_AGC_TARGET: - (*(spx_int32_t*)ptr) = st->agc_level; - break; -#endif - default: - speex_warning_int("Unknown speex_preprocess_ctl request: ", request); - return -1; - } - return 0; -} - -#ifdef FIXED_DEBUG -long long spx_mips=0; -#endif - diff -Nru speex-1.2~rc1.2/libspeex/pseudofloat.h speex-1.2.0/libspeex/pseudofloat.h --- speex-1.2~rc1.2/libspeex/pseudofloat.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/pseudofloat.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,379 +0,0 @@ -/* Copyright (C) 2005 Jean-Marc Valin */ -/** - @file pseudofloat.h - @brief Pseudo-floating point - * This header file provides a lightweight floating point type for - * use on fixed-point platforms when a large dynamic range is - * required. The new type is not compatible with the 32-bit IEEE format, - * it is not even remotely as accurate as 32-bit floats, and is not - * even guaranteed to produce even remotely correct results for code - * other than Speex. It makes all kinds of shortcuts that are acceptable - * for Speex, but may not be acceptable for your application. You're - * quite welcome to reuse this code and improve it, but don't assume - * it works out of the box. Most likely, it doesn't. - */ -/* - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - - Neither the name of the Xiph.org Foundation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR - CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef PSEUDOFLOAT_H -#define PSEUDOFLOAT_H - -#include "arch.h" -#include "os_support.h" -#include "math_approx.h" -#include - -#ifdef FIXED_POINT - -typedef struct { - spx_int16_t m; - spx_int16_t e; -} spx_float_t; - -static const spx_float_t FLOAT_ZERO = {0,0}; -static const spx_float_t FLOAT_ONE = {16384,-14}; -static const spx_float_t FLOAT_HALF = {16384,-15}; - -#define MIN(a,b) ((a)<(b)?(a):(b)) -static inline spx_float_t PSEUDOFLOAT(spx_int32_t x) -{ - int e=0; - int sign=0; - if (x<0) - { - sign = 1; - x = -x; - } - if (x==0) - { - spx_float_t r = {0,0}; - return r; - } - e = spx_ilog2(ABS32(x))-14; - x = VSHR32(x, e); - if (sign) - { - spx_float_t r; - r.m = -x; - r.e = e; - return r; - } - else - { - spx_float_t r; - r.m = x; - r.e = e; - return r; - } -} - - -static inline spx_float_t FLOAT_ADD(spx_float_t a, spx_float_t b) -{ - spx_float_t r; - if (a.m==0) - return b; - else if (b.m==0) - return a; - if ((a).e > (b).e) - { - r.m = ((a).m>>1) + ((b).m>>MIN(15,(a).e-(b).e+1)); - r.e = (a).e+1; - } - else - { - r.m = ((b).m>>1) + ((a).m>>MIN(15,(b).e-(a).e+1)); - r.e = (b).e+1; - } - if (r.m>0) - { - if (r.m<16384) - { - r.m<<=1; - r.e-=1; - } - } else { - if (r.m>-16384) - { - r.m<<=1; - r.e-=1; - } - } - /*printf ("%f + %f = %f\n", REALFLOAT(a), REALFLOAT(b), REALFLOAT(r));*/ - return r; -} - -static inline spx_float_t FLOAT_SUB(spx_float_t a, spx_float_t b) -{ - spx_float_t r; - if (a.m==0) - return b; - else if (b.m==0) - return a; - if ((a).e > (b).e) - { - r.m = ((a).m>>1) - ((b).m>>MIN(15,(a).e-(b).e+1)); - r.e = (a).e+1; - } - else - { - r.m = ((a).m>>MIN(15,(b).e-(a).e+1)) - ((b).m>>1); - r.e = (b).e+1; - } - if (r.m>0) - { - if (r.m<16384) - { - r.m<<=1; - r.e-=1; - } - } else { - if (r.m>-16384) - { - r.m<<=1; - r.e-=1; - } - } - /*printf ("%f + %f = %f\n", REALFLOAT(a), REALFLOAT(b), REALFLOAT(r));*/ - return r; -} - -static inline int FLOAT_LT(spx_float_t a, spx_float_t b) -{ - if (a.m==0) - return b.m>0; - else if (b.m==0) - return a.m<0; - if ((a).e > (b).e) - return ((a).m>>1) < ((b).m>>MIN(15,(a).e-(b).e+1)); - else - return ((b).m>>1) > ((a).m>>MIN(15,(b).e-(a).e+1)); - -} - -static inline int FLOAT_GT(spx_float_t a, spx_float_t b) -{ - return FLOAT_LT(b,a); -} - -static inline spx_float_t FLOAT_MULT(spx_float_t a, spx_float_t b) -{ - spx_float_t r; - r.m = (spx_int16_t)((spx_int32_t)(a).m*(b).m>>15); - r.e = (a).e+(b).e+15; - if (r.m>0) - { - if (r.m<16384) - { - r.m<<=1; - r.e-=1; - } - } else { - if (r.m>-16384) - { - r.m<<=1; - r.e-=1; - } - } - /*printf ("%f * %f = %f\n", REALFLOAT(a), REALFLOAT(b), REALFLOAT(r));*/ - return r; -} - -static inline spx_float_t FLOAT_AMULT(spx_float_t a, spx_float_t b) -{ - spx_float_t r; - r.m = (spx_int16_t)((spx_int32_t)(a).m*(b).m>>15); - r.e = (a).e+(b).e+15; - return r; -} - - -static inline spx_float_t FLOAT_SHL(spx_float_t a, int b) -{ - spx_float_t r; - r.m = a.m; - r.e = a.e+b; - return r; -} - -static inline spx_int16_t FLOAT_EXTRACT16(spx_float_t a) -{ - if (a.e<0) - return EXTRACT16((EXTEND32(a.m)+(EXTEND32(1)<<(-a.e-1)))>>-a.e); - else - return a.m<>-a.e; - else - return EXTEND32(a.m)<=SHL32(EXTEND32(b.m-1),15)) - { - a >>= 1; - e++; - } - r.m = DIV32_16(a,b.m); - r.e = e-b.e; - return r; -} - - -/* Do NOT attempt to divide by a negative number */ -static inline spx_float_t FLOAT_DIV32(spx_word32_t a, spx_word32_t b) -{ - int e0=0,e=0; - spx_float_t r; - if (a==0) - { - return FLOAT_ZERO; - } - if (b>32767) - { - e0 = spx_ilog2(b)-14; - b = VSHR32(b, e0); - e0 = -e0; - } - e = spx_ilog2(ABS32(a))-spx_ilog2(b-1)-15; - a = VSHR32(a, e); - if (ABS32(a)>=SHL32(EXTEND32(b-1),15)) - { - a >>= 1; - e++; - } - e += e0; - r.m = DIV32_16(a,b); - r.e = e; - return r; -} - -/* Do NOT attempt to divide by a negative number */ -static inline spx_float_t FLOAT_DIVU(spx_float_t a, spx_float_t b) -{ - int e=0; - spx_int32_t num; - spx_float_t r; - if (b.m<=0) - { - speex_warning_int("Attempted to divide by", b.m); - return FLOAT_ONE; - } - num = a.m; - a.m = ABS16(a.m); - while (a.m >= b.m) - { - e++; - a.m >>= 1; - } - num = num << (15-e); - r.m = DIV32_16(num,b.m); - r.e = a.e-b.e-15+e; - return r; -} - -static inline spx_float_t FLOAT_SQRT(spx_float_t a) -{ - spx_float_t r; - spx_int32_t m; - m = SHL32(EXTEND32(a.m), 14); - r.e = a.e - 14; - if (r.e & 1) - { - r.e -= 1; - m <<= 1; - } - r.e >>= 1; - r.m = spx_sqrt(m); - return r; -} - -#else - -#define spx_float_t float -#define FLOAT_ZERO 0.f -#define FLOAT_ONE 1.f -#define FLOAT_HALF 0.5f -#define PSEUDOFLOAT(x) (x) -#define FLOAT_MULT(a,b) ((a)*(b)) -#define FLOAT_AMULT(a,b) ((a)*(b)) -#define FLOAT_MUL32(a,b) ((a)*(b)) -#define FLOAT_DIV32(a,b) ((a)/(b)) -#define FLOAT_EXTRACT16(a) (a) -#define FLOAT_EXTRACT32(a) (a) -#define FLOAT_ADD(a,b) ((a)+(b)) -#define FLOAT_SUB(a,b) ((a)-(b)) -#define REALFLOAT(x) (x) -#define FLOAT_DIV32_FLOAT(a,b) ((a)/(b)) -#define FLOAT_MUL32U(a,b) ((a)*(b)) -#define FLOAT_SHL(a,b) (a) -#define FLOAT_LT(a,b) ((a)<(b)) -#define FLOAT_GT(a,b) ((a)>(b)) -#define FLOAT_DIVU(a,b) ((a)/(b)) -#define FLOAT_SQRT(a) (spx_sqrt(a)) - -#endif - -#endif diff -Nru speex-1.2~rc1.2/libspeex/quant_lsp_bfin.h speex-1.2.0/libspeex/quant_lsp_bfin.h --- speex-1.2~rc1.2/libspeex/quant_lsp_bfin.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/quant_lsp_bfin.h 2015-07-06 15:01:58.000000000 +0000 @@ -36,6 +36,8 @@ #define OVERRIDE_LSP_QUANT #ifdef OVERRIDE_LSP_QUANT +#include "bfin.h" + /* Note http://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html well tell you all the magic resgister constraints used below @@ -84,7 +86,8 @@ " L0 = 0;\n\t" : "=&d" (best_dist), "=&d" (best_id) : "a" (x), "b" (cdbk), "a" (nbVec), "a" (nbDim) - : "I0", "P2", "R0", "R1", "R2", "R3", "R5", "L0", "B0", "A0" + : "I0", "P2", "R0", "R1", "R2", "R3", "R5", "L0", "B0", "A0", + "CC", "ASTAT" BFIN_HWLOOP0_REGS BFIN_HWLOOP1_REGS ); for (j=0;j +#include "speex/speex_bits.h" #include "arch.h" #define MAX_LSP_SIZE 20 diff -Nru speex-1.2~rc1.2/libspeex/resample.c speex-1.2.0/libspeex/resample.c --- speex-1.2~rc1.2/libspeex/resample.c 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/libspeex/resample.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,1135 +0,0 @@ -/* Copyright (C) 2007-2008 Jean-Marc Valin - Copyright (C) 2008 Thorvald Natvig - - File: resample.c - Arbitrary resampling code - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -/* - The design goals of this code are: - - Very fast algorithm - - SIMD-friendly algorithm - - Low memory requirement - - Good *perceptual* quality (and not best SNR) - - Warning: This resampler is relatively new. Although I think I got rid of - all the major bugs and I don't expect the API to change anymore, there - may be something I've missed. So use with caution. - - This algorithm is based on this original resampling algorithm: - Smith, Julius O. Digital Audio Resampling Home Page - Center for Computer Research in Music and Acoustics (CCRMA), - Stanford University, 2007. - Web published at http://www-ccrma.stanford.edu/~jos/resample/. - - There is one main difference, though. This resampler uses cubic - interpolation instead of linear interpolation in the above paper. This - makes the table much smaller and makes it possible to compute that table - on a per-stream basis. In turn, being able to tweak the table for each - stream makes it possible to both reduce complexity on simple ratios - (e.g. 2/3), and get rid of the rounding operations in the inner loop. - The latter both reduces CPU time and makes the algorithm more SIMD-friendly. -*/ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#ifdef OUTSIDE_SPEEX -#include -static void *speex_alloc (int size) {return calloc(size,1);} -static void *speex_realloc (void *ptr, int size) {return realloc(ptr, size);} -static void speex_free (void *ptr) {free(ptr);} -#include "speex_resampler.h" -#include "arch.h" -#else /* OUTSIDE_SPEEX */ - -#include "speex/speex_resampler.h" -#include "arch.h" -#include "os_support.h" -#endif /* OUTSIDE_SPEEX */ - -#include "stack_alloc.h" -#include - -#ifndef M_PI -#define M_PI 3.14159263 -#endif - -#ifdef FIXED_POINT -#define WORD2INT(x) ((x) < -32767 ? -32768 : ((x) > 32766 ? 32767 : (x))) -#else -#define WORD2INT(x) ((x) < -32767.5f ? -32768 : ((x) > 32766.5f ? 32767 : floor(.5+(x)))) -#endif - -#define IMAX(a,b) ((a) > (b) ? (a) : (b)) -#define IMIN(a,b) ((a) < (b) ? (a) : (b)) - -#ifndef NULL -#define NULL 0 -#endif - -#ifdef _USE_SSE -#include "resample_sse.h" -#endif - -/* Numer of elements to allocate on the stack */ -#ifdef VAR_ARRAYS -#define FIXED_STACK_ALLOC 8192 -#else -#define FIXED_STACK_ALLOC 1024 -#endif - -typedef int (*resampler_basic_func)(SpeexResamplerState *, spx_uint32_t , const spx_word16_t *, spx_uint32_t *, spx_word16_t *, spx_uint32_t *); - -struct SpeexResamplerState_ { - spx_uint32_t in_rate; - spx_uint32_t out_rate; - spx_uint32_t num_rate; - spx_uint32_t den_rate; - - int quality; - spx_uint32_t nb_channels; - spx_uint32_t filt_len; - spx_uint32_t mem_alloc_size; - spx_uint32_t buffer_size; - int int_advance; - int frac_advance; - float cutoff; - spx_uint32_t oversample; - int initialised; - int started; - - /* These are per-channel */ - spx_int32_t *last_sample; - spx_uint32_t *samp_frac_num; - spx_uint32_t *magic_samples; - - spx_word16_t *mem; - spx_word16_t *sinc_table; - spx_uint32_t sinc_table_length; - resampler_basic_func resampler_ptr; - - int in_stride; - int out_stride; -} ; - -static double kaiser12_table[68] = { - 0.99859849, 1.00000000, 0.99859849, 0.99440475, 0.98745105, 0.97779076, - 0.96549770, 0.95066529, 0.93340547, 0.91384741, 0.89213598, 0.86843014, - 0.84290116, 0.81573067, 0.78710866, 0.75723148, 0.72629970, 0.69451601, - 0.66208321, 0.62920216, 0.59606986, 0.56287762, 0.52980938, 0.49704014, - 0.46473455, 0.43304576, 0.40211431, 0.37206735, 0.34301800, 0.31506490, - 0.28829195, 0.26276832, 0.23854851, 0.21567274, 0.19416736, 0.17404546, - 0.15530766, 0.13794294, 0.12192957, 0.10723616, 0.09382272, 0.08164178, - 0.07063950, 0.06075685, 0.05193064, 0.04409466, 0.03718069, 0.03111947, - 0.02584161, 0.02127838, 0.01736250, 0.01402878, 0.01121463, 0.00886058, - 0.00691064, 0.00531256, 0.00401805, 0.00298291, 0.00216702, 0.00153438, - 0.00105297, 0.00069463, 0.00043489, 0.00025272, 0.00013031, 0.0000527734, - 0.00001000, 0.00000000}; -/* -static double kaiser12_table[36] = { - 0.99440475, 1.00000000, 0.99440475, 0.97779076, 0.95066529, 0.91384741, - 0.86843014, 0.81573067, 0.75723148, 0.69451601, 0.62920216, 0.56287762, - 0.49704014, 0.43304576, 0.37206735, 0.31506490, 0.26276832, 0.21567274, - 0.17404546, 0.13794294, 0.10723616, 0.08164178, 0.06075685, 0.04409466, - 0.03111947, 0.02127838, 0.01402878, 0.00886058, 0.00531256, 0.00298291, - 0.00153438, 0.00069463, 0.00025272, 0.0000527734, 0.00000500, 0.00000000}; -*/ -static double kaiser10_table[36] = { - 0.99537781, 1.00000000, 0.99537781, 0.98162644, 0.95908712, 0.92831446, - 0.89005583, 0.84522401, 0.79486424, 0.74011713, 0.68217934, 0.62226347, - 0.56155915, 0.50119680, 0.44221549, 0.38553619, 0.33194107, 0.28205962, - 0.23636152, 0.19515633, 0.15859932, 0.12670280, 0.09935205, 0.07632451, - 0.05731132, 0.04193980, 0.02979584, 0.02044510, 0.01345224, 0.00839739, - 0.00488951, 0.00257636, 0.00115101, 0.00035515, 0.00000000, 0.00000000}; - -static double kaiser8_table[36] = { - 0.99635258, 1.00000000, 0.99635258, 0.98548012, 0.96759014, 0.94302200, - 0.91223751, 0.87580811, 0.83439927, 0.78875245, 0.73966538, 0.68797126, - 0.63451750, 0.58014482, 0.52566725, 0.47185369, 0.41941150, 0.36897272, - 0.32108304, 0.27619388, 0.23465776, 0.19672670, 0.16255380, 0.13219758, - 0.10562887, 0.08273982, 0.06335451, 0.04724088, 0.03412321, 0.02369490, - 0.01563093, 0.00959968, 0.00527363, 0.00233883, 0.00050000, 0.00000000}; - -static double kaiser6_table[36] = { - 0.99733006, 1.00000000, 0.99733006, 0.98935595, 0.97618418, 0.95799003, - 0.93501423, 0.90755855, 0.87598009, 0.84068475, 0.80211977, 0.76076565, - 0.71712752, 0.67172623, 0.62508937, 0.57774224, 0.53019925, 0.48295561, - 0.43647969, 0.39120616, 0.34752997, 0.30580127, 0.26632152, 0.22934058, - 0.19505503, 0.16360756, 0.13508755, 0.10953262, 0.08693120, 0.06722600, - 0.05031820, 0.03607231, 0.02432151, 0.01487334, 0.00752000, 0.00000000}; - -struct FuncDef { - double *table; - int oversample; -}; - -static struct FuncDef _KAISER12 = {kaiser12_table, 64}; -#define KAISER12 (&_KAISER12) -/*static struct FuncDef _KAISER12 = {kaiser12_table, 32}; -#define KAISER12 (&_KAISER12)*/ -static struct FuncDef _KAISER10 = {kaiser10_table, 32}; -#define KAISER10 (&_KAISER10) -static struct FuncDef _KAISER8 = {kaiser8_table, 32}; -#define KAISER8 (&_KAISER8) -static struct FuncDef _KAISER6 = {kaiser6_table, 32}; -#define KAISER6 (&_KAISER6) - -struct QualityMapping { - int base_length; - int oversample; - float downsample_bandwidth; - float upsample_bandwidth; - struct FuncDef *window_func; -}; - - -/* This table maps conversion quality to internal parameters. There are two - reasons that explain why the up-sampling bandwidth is larger than the - down-sampling bandwidth: - 1) When up-sampling, we can assume that the spectrum is already attenuated - close to the Nyquist rate (from an A/D or a previous resampling filter) - 2) Any aliasing that occurs very close to the Nyquist rate will be masked - by the sinusoids/noise just below the Nyquist rate (guaranteed only for - up-sampling). -*/ -static const struct QualityMapping quality_map[11] = { - { 8, 4, 0.830f, 0.860f, KAISER6 }, /* Q0 */ - { 16, 4, 0.850f, 0.880f, KAISER6 }, /* Q1 */ - { 32, 4, 0.882f, 0.910f, KAISER6 }, /* Q2 */ /* 82.3% cutoff ( ~60 dB stop) 6 */ - { 48, 8, 0.895f, 0.917f, KAISER8 }, /* Q3 */ /* 84.9% cutoff ( ~80 dB stop) 8 */ - { 64, 8, 0.921f, 0.940f, KAISER8 }, /* Q4 */ /* 88.7% cutoff ( ~80 dB stop) 8 */ - { 80, 16, 0.922f, 0.940f, KAISER10}, /* Q5 */ /* 89.1% cutoff (~100 dB stop) 10 */ - { 96, 16, 0.940f, 0.945f, KAISER10}, /* Q6 */ /* 91.5% cutoff (~100 dB stop) 10 */ - {128, 16, 0.950f, 0.950f, KAISER10}, /* Q7 */ /* 93.1% cutoff (~100 dB stop) 10 */ - {160, 16, 0.960f, 0.960f, KAISER10}, /* Q8 */ /* 94.5% cutoff (~100 dB stop) 10 */ - {192, 32, 0.968f, 0.968f, KAISER12}, /* Q9 */ /* 95.5% cutoff (~100 dB stop) 10 */ - {256, 32, 0.975f, 0.975f, KAISER12}, /* Q10 */ /* 96.6% cutoff (~100 dB stop) 10 */ -}; -/*8,24,40,56,80,104,128,160,200,256,320*/ -static double compute_func(float x, struct FuncDef *func) -{ - float y, frac; - double interp[4]; - int ind; - y = x*func->oversample; - ind = (int)floor(y); - frac = (y-ind); - /* CSE with handle the repeated powers */ - interp[3] = -0.1666666667*frac + 0.1666666667*(frac*frac*frac); - interp[2] = frac + 0.5*(frac*frac) - 0.5*(frac*frac*frac); - /*interp[2] = 1.f - 0.5f*frac - frac*frac + 0.5f*frac*frac*frac;*/ - interp[0] = -0.3333333333*frac + 0.5*(frac*frac) - 0.1666666667*(frac*frac*frac); - /* Just to make sure we don't have rounding problems */ - interp[1] = 1.f-interp[3]-interp[2]-interp[0]; - - /*sum = frac*accum[1] + (1-frac)*accum[2];*/ - return interp[0]*func->table[ind] + interp[1]*func->table[ind+1] + interp[2]*func->table[ind+2] + interp[3]*func->table[ind+3]; -} - -#if 0 -#include -int main(int argc, char **argv) -{ - int i; - for (i=0;i<256;i++) - { - printf ("%f\n", compute_func(i/256., KAISER12)); - } - return 0; -} -#endif - -#ifdef FIXED_POINT -/* The slow way of computing a sinc for the table. Should improve that some day */ -static spx_word16_t sinc(float cutoff, float x, int N, struct FuncDef *window_func) -{ - /*fprintf (stderr, "%f ", x);*/ - float xx = x * cutoff; - if (fabs(x)<1e-6f) - return WORD2INT(32768.*cutoff); - else if (fabs(x) > .5f*N) - return 0; - /*FIXME: Can it really be any slower than this? */ - return WORD2INT(32768.*cutoff*sin(M_PI*xx)/(M_PI*xx) * compute_func(fabs(2.*x/N), window_func)); -} -#else -/* The slow way of computing a sinc for the table. Should improve that some day */ -static spx_word16_t sinc(float cutoff, float x, int N, struct FuncDef *window_func) -{ - /*fprintf (stderr, "%f ", x);*/ - float xx = x * cutoff; - if (fabs(x)<1e-6) - return cutoff; - else if (fabs(x) > .5*N) - return 0; - /*FIXME: Can it really be any slower than this? */ - return cutoff*sin(M_PI*xx)/(M_PI*xx) * compute_func(fabs(2.*x/N), window_func); -} -#endif - -#ifdef FIXED_POINT -static void cubic_coef(spx_word16_t x, spx_word16_t interp[4]) -{ - /* Compute interpolation coefficients. I'm not sure whether this corresponds to cubic interpolation - but I know it's MMSE-optimal on a sinc */ - spx_word16_t x2, x3; - x2 = MULT16_16_P15(x, x); - x3 = MULT16_16_P15(x, x2); - interp[0] = PSHR32(MULT16_16(QCONST16(-0.16667f, 15),x) + MULT16_16(QCONST16(0.16667f, 15),x3),15); - interp[1] = EXTRACT16(EXTEND32(x) + SHR32(SUB32(EXTEND32(x2),EXTEND32(x3)),1)); - interp[3] = PSHR32(MULT16_16(QCONST16(-0.33333f, 15),x) + MULT16_16(QCONST16(.5f,15),x2) - MULT16_16(QCONST16(0.16667f, 15),x3),15); - /* Just to make sure we don't have rounding problems */ - interp[2] = Q15_ONE-interp[0]-interp[1]-interp[3]; - if (interp[2]<32767) - interp[2]+=1; -} -#else -static void cubic_coef(spx_word16_t frac, spx_word16_t interp[4]) -{ - /* Compute interpolation coefficients. I'm not sure whether this corresponds to cubic interpolation - but I know it's MMSE-optimal on a sinc */ - interp[0] = -0.16667f*frac + 0.16667f*frac*frac*frac; - interp[1] = frac + 0.5f*frac*frac - 0.5f*frac*frac*frac; - /*interp[2] = 1.f - 0.5f*frac - frac*frac + 0.5f*frac*frac*frac;*/ - interp[3] = -0.33333f*frac + 0.5f*frac*frac - 0.16667f*frac*frac*frac; - /* Just to make sure we don't have rounding problems */ - interp[2] = 1.-interp[0]-interp[1]-interp[3]; -} -#endif - -static int resampler_basic_direct_single(SpeexResamplerState *st, spx_uint32_t channel_index, const spx_word16_t *in, spx_uint32_t *in_len, spx_word16_t *out, spx_uint32_t *out_len) -{ - const int N = st->filt_len; - int out_sample = 0; - int last_sample = st->last_sample[channel_index]; - spx_uint32_t samp_frac_num = st->samp_frac_num[channel_index]; - const spx_word16_t *sinc_table = st->sinc_table; - const int out_stride = st->out_stride; - const int int_advance = st->int_advance; - const int frac_advance = st->frac_advance; - const spx_uint32_t den_rate = st->den_rate; - spx_word32_t sum; - int j; - - while (!(last_sample >= (spx_int32_t)*in_len || out_sample >= (spx_int32_t)*out_len)) - { - const spx_word16_t *sinc = & sinc_table[samp_frac_num*N]; - const spx_word16_t *iptr = & in[last_sample]; - -#ifndef OVERRIDE_INNER_PRODUCT_SINGLE - float accum[4] = {0,0,0,0}; - - for(j=0;j= den_rate) - { - samp_frac_num -= den_rate; - last_sample++; - } - } - - st->last_sample[channel_index] = last_sample; - st->samp_frac_num[channel_index] = samp_frac_num; - return out_sample; -} - -#ifdef FIXED_POINT -#else -/* This is the same as the previous function, except with a double-precision accumulator */ -static int resampler_basic_direct_double(SpeexResamplerState *st, spx_uint32_t channel_index, const spx_word16_t *in, spx_uint32_t *in_len, spx_word16_t *out, spx_uint32_t *out_len) -{ - const int N = st->filt_len; - int out_sample = 0; - int last_sample = st->last_sample[channel_index]; - spx_uint32_t samp_frac_num = st->samp_frac_num[channel_index]; - const spx_word16_t *sinc_table = st->sinc_table; - const int out_stride = st->out_stride; - const int int_advance = st->int_advance; - const int frac_advance = st->frac_advance; - const spx_uint32_t den_rate = st->den_rate; - double sum; - int j; - - while (!(last_sample >= (spx_int32_t)*in_len || out_sample >= (spx_int32_t)*out_len)) - { - const spx_word16_t *sinc = & sinc_table[samp_frac_num*N]; - const spx_word16_t *iptr = & in[last_sample]; - -#ifndef OVERRIDE_INNER_PRODUCT_DOUBLE - double accum[4] = {0,0,0,0}; - - for(j=0;j= den_rate) - { - samp_frac_num -= den_rate; - last_sample++; - } - } - - st->last_sample[channel_index] = last_sample; - st->samp_frac_num[channel_index] = samp_frac_num; - return out_sample; -} -#endif - -static int resampler_basic_interpolate_single(SpeexResamplerState *st, spx_uint32_t channel_index, const spx_word16_t *in, spx_uint32_t *in_len, spx_word16_t *out, spx_uint32_t *out_len) -{ - const int N = st->filt_len; - int out_sample = 0; - int last_sample = st->last_sample[channel_index]; - spx_uint32_t samp_frac_num = st->samp_frac_num[channel_index]; - const int out_stride = st->out_stride; - const int int_advance = st->int_advance; - const int frac_advance = st->frac_advance; - const spx_uint32_t den_rate = st->den_rate; - int j; - spx_word32_t sum; - - while (!(last_sample >= (spx_int32_t)*in_len || out_sample >= (spx_int32_t)*out_len)) - { - const spx_word16_t *iptr = & in[last_sample]; - - const int offset = samp_frac_num*st->oversample/st->den_rate; -#ifdef FIXED_POINT - const spx_word16_t frac = PDIV32(SHL32((samp_frac_num*st->oversample) % st->den_rate,15),st->den_rate); -#else - const spx_word16_t frac = ((float)((samp_frac_num*st->oversample) % st->den_rate))/st->den_rate; -#endif - spx_word16_t interp[4]; - - -#ifndef OVERRIDE_INTERPOLATE_PRODUCT_SINGLE - spx_word32_t accum[4] = {0,0,0,0}; - - for(j=0;jsinc_table[4+(j+1)*st->oversample-offset-2]); - accum[1] += MULT16_16(curr_in,st->sinc_table[4+(j+1)*st->oversample-offset-1]); - accum[2] += MULT16_16(curr_in,st->sinc_table[4+(j+1)*st->oversample-offset]); - accum[3] += MULT16_16(curr_in,st->sinc_table[4+(j+1)*st->oversample-offset+1]); - } - - cubic_coef(frac, interp); - sum = MULT16_32_Q15(interp[0],accum[0]) + MULT16_32_Q15(interp[1],accum[1]) + MULT16_32_Q15(interp[2],accum[2]) + MULT16_32_Q15(interp[3],accum[3]); -#else - cubic_coef(frac, interp); - sum = interpolate_product_single(iptr, st->sinc_table + st->oversample + 4 - offset - 2, N, st->oversample, interp); -#endif - - out[out_stride * out_sample++] = PSHR32(sum,15); - last_sample += int_advance; - samp_frac_num += frac_advance; - if (samp_frac_num >= den_rate) - { - samp_frac_num -= den_rate; - last_sample++; - } - } - - st->last_sample[channel_index] = last_sample; - st->samp_frac_num[channel_index] = samp_frac_num; - return out_sample; -} - -#ifdef FIXED_POINT -#else -/* This is the same as the previous function, except with a double-precision accumulator */ -static int resampler_basic_interpolate_double(SpeexResamplerState *st, spx_uint32_t channel_index, const spx_word16_t *in, spx_uint32_t *in_len, spx_word16_t *out, spx_uint32_t *out_len) -{ - const int N = st->filt_len; - int out_sample = 0; - int last_sample = st->last_sample[channel_index]; - spx_uint32_t samp_frac_num = st->samp_frac_num[channel_index]; - const int out_stride = st->out_stride; - const int int_advance = st->int_advance; - const int frac_advance = st->frac_advance; - const spx_uint32_t den_rate = st->den_rate; - int j; - spx_word32_t sum; - - while (!(last_sample >= (spx_int32_t)*in_len || out_sample >= (spx_int32_t)*out_len)) - { - const spx_word16_t *iptr = & in[last_sample]; - - const int offset = samp_frac_num*st->oversample/st->den_rate; -#ifdef FIXED_POINT - const spx_word16_t frac = PDIV32(SHL32((samp_frac_num*st->oversample) % st->den_rate,15),st->den_rate); -#else - const spx_word16_t frac = ((float)((samp_frac_num*st->oversample) % st->den_rate))/st->den_rate; -#endif - spx_word16_t interp[4]; - - -#ifndef OVERRIDE_INTERPOLATE_PRODUCT_DOUBLE - double accum[4] = {0,0,0,0}; - - for(j=0;jsinc_table[4+(j+1)*st->oversample-offset-2]); - accum[1] += MULT16_16(curr_in,st->sinc_table[4+(j+1)*st->oversample-offset-1]); - accum[2] += MULT16_16(curr_in,st->sinc_table[4+(j+1)*st->oversample-offset]); - accum[3] += MULT16_16(curr_in,st->sinc_table[4+(j+1)*st->oversample-offset+1]); - } - - cubic_coef(frac, interp); - sum = MULT16_32_Q15(interp[0],accum[0]) + MULT16_32_Q15(interp[1],accum[1]) + MULT16_32_Q15(interp[2],accum[2]) + MULT16_32_Q15(interp[3],accum[3]); -#else - cubic_coef(frac, interp); - sum = interpolate_product_double(iptr, st->sinc_table + st->oversample + 4 - offset - 2, N, st->oversample, interp); -#endif - - out[out_stride * out_sample++] = PSHR32(sum,15); - last_sample += int_advance; - samp_frac_num += frac_advance; - if (samp_frac_num >= den_rate) - { - samp_frac_num -= den_rate; - last_sample++; - } - } - - st->last_sample[channel_index] = last_sample; - st->samp_frac_num[channel_index] = samp_frac_num; - return out_sample; -} -#endif - -static void update_filter(SpeexResamplerState *st) -{ - spx_uint32_t old_length; - - old_length = st->filt_len; - st->oversample = quality_map[st->quality].oversample; - st->filt_len = quality_map[st->quality].base_length; - - if (st->num_rate > st->den_rate) - { - /* down-sampling */ - st->cutoff = quality_map[st->quality].downsample_bandwidth * st->den_rate / st->num_rate; - /* FIXME: divide the numerator and denominator by a certain amount if they're too large */ - st->filt_len = st->filt_len*st->num_rate / st->den_rate; - /* Round up to make sure we have a multiple of 8 for SSE */ - st->filt_len = ((st->filt_len-1)&(~0x7))+8; - if (2*st->den_rate < st->num_rate) - st->oversample >>= 1; - if (4*st->den_rate < st->num_rate) - st->oversample >>= 1; - if (8*st->den_rate < st->num_rate) - st->oversample >>= 1; - if (16*st->den_rate < st->num_rate) - st->oversample >>= 1; - if (st->oversample < 1) - st->oversample = 1; - } else { - /* up-sampling */ - st->cutoff = quality_map[st->quality].upsample_bandwidth; - } - - /* Choose the resampling type that requires the least amount of memory */ - if (st->filt_len*st->den_rate <= st->filt_len*st->oversample+8) - { - spx_uint32_t i; - if (!st->sinc_table) - st->sinc_table = (spx_word16_t *)speex_alloc(st->filt_len*st->den_rate*sizeof(spx_word16_t)); - else if (st->sinc_table_length < st->filt_len*st->den_rate) - { - st->sinc_table = (spx_word16_t *)speex_realloc(st->sinc_table,st->filt_len*st->den_rate*sizeof(spx_word16_t)); - st->sinc_table_length = st->filt_len*st->den_rate; - } - for (i=0;iden_rate;i++) - { - spx_int32_t j; - for (j=0;jfilt_len;j++) - { - st->sinc_table[i*st->filt_len+j] = sinc(st->cutoff,((j-(spx_int32_t)st->filt_len/2+1)-((float)i)/st->den_rate), st->filt_len, quality_map[st->quality].window_func); - } - } -#ifdef FIXED_POINT - st->resampler_ptr = resampler_basic_direct_single; -#else - if (st->quality>8) - st->resampler_ptr = resampler_basic_direct_double; - else - st->resampler_ptr = resampler_basic_direct_single; -#endif - /*fprintf (stderr, "resampler uses direct sinc table and normalised cutoff %f\n", cutoff);*/ - } else { - spx_int32_t i; - if (!st->sinc_table) - st->sinc_table = (spx_word16_t *)speex_alloc((st->filt_len*st->oversample+8)*sizeof(spx_word16_t)); - else if (st->sinc_table_length < st->filt_len*st->oversample+8) - { - st->sinc_table = (spx_word16_t *)speex_realloc(st->sinc_table,(st->filt_len*st->oversample+8)*sizeof(spx_word16_t)); - st->sinc_table_length = st->filt_len*st->oversample+8; - } - for (i=-4;i<(spx_int32_t)(st->oversample*st->filt_len+4);i++) - st->sinc_table[i+4] = sinc(st->cutoff,(i/(float)st->oversample - st->filt_len/2), st->filt_len, quality_map[st->quality].window_func); -#ifdef FIXED_POINT - st->resampler_ptr = resampler_basic_interpolate_single; -#else - if (st->quality>8) - st->resampler_ptr = resampler_basic_interpolate_double; - else - st->resampler_ptr = resampler_basic_interpolate_single; -#endif - /*fprintf (stderr, "resampler uses interpolated sinc table and normalised cutoff %f\n", cutoff);*/ - } - st->int_advance = st->num_rate/st->den_rate; - st->frac_advance = st->num_rate%st->den_rate; - - - /* Here's the place where we update the filter memory to take into account - the change in filter length. It's probably the messiest part of the code - due to handling of lots of corner cases. */ - if (!st->mem) - { - spx_uint32_t i; - st->mem_alloc_size = st->filt_len-1 + st->buffer_size; - st->mem = (spx_word16_t*)speex_alloc(st->nb_channels*st->mem_alloc_size * sizeof(spx_word16_t)); - for (i=0;inb_channels*st->mem_alloc_size;i++) - st->mem[i] = 0; - /*speex_warning("init filter");*/ - } else if (!st->started) - { - spx_uint32_t i; - st->mem_alloc_size = st->filt_len-1 + st->buffer_size; - st->mem = (spx_word16_t*)speex_realloc(st->mem, st->nb_channels*st->mem_alloc_size * sizeof(spx_word16_t)); - for (i=0;inb_channels*st->mem_alloc_size;i++) - st->mem[i] = 0; - /*speex_warning("reinit filter");*/ - } else if (st->filt_len > old_length) - { - spx_int32_t i; - /* Increase the filter length */ - /*speex_warning("increase filter size");*/ - int old_alloc_size = st->mem_alloc_size; - if ((st->filt_len-1 + st->buffer_size) > st->mem_alloc_size) - { - st->mem_alloc_size = st->filt_len-1 + st->buffer_size; - st->mem = (spx_word16_t*)speex_realloc(st->mem, st->nb_channels*st->mem_alloc_size * sizeof(spx_word16_t)); - } - for (i=st->nb_channels-1;i>=0;i--) - { - spx_int32_t j; - spx_uint32_t olen = old_length; - /*if (st->magic_samples[i])*/ - { - /* Try and remove the magic samples as if nothing had happened */ - - /* FIXME: This is wrong but for now we need it to avoid going over the array bounds */ - olen = old_length + 2*st->magic_samples[i]; - for (j=old_length-2+st->magic_samples[i];j>=0;j--) - st->mem[i*st->mem_alloc_size+j+st->magic_samples[i]] = st->mem[i*old_alloc_size+j]; - for (j=0;jmagic_samples[i];j++) - st->mem[i*st->mem_alloc_size+j] = 0; - st->magic_samples[i] = 0; - } - if (st->filt_len > olen) - { - /* If the new filter length is still bigger than the "augmented" length */ - /* Copy data going backward */ - for (j=0;jmem[i*st->mem_alloc_size+(st->filt_len-2-j)] = st->mem[i*st->mem_alloc_size+(olen-2-j)]; - /* Then put zeros for lack of anything better */ - for (;jfilt_len-1;j++) - st->mem[i*st->mem_alloc_size+(st->filt_len-2-j)] = 0; - /* Adjust last_sample */ - st->last_sample[i] += (st->filt_len - olen)/2; - } else { - /* Put back some of the magic! */ - st->magic_samples[i] = (olen - st->filt_len)/2; - for (j=0;jfilt_len-1+st->magic_samples[i];j++) - st->mem[i*st->mem_alloc_size+j] = st->mem[i*st->mem_alloc_size+j+st->magic_samples[i]]; - } - } - } else if (st->filt_len < old_length) - { - spx_uint32_t i; - /* Reduce filter length, this a bit tricky. We need to store some of the memory as "magic" - samples so they can be used directly as input the next time(s) */ - for (i=0;inb_channels;i++) - { - spx_uint32_t j; - spx_uint32_t old_magic = st->magic_samples[i]; - st->magic_samples[i] = (old_length - st->filt_len)/2; - /* We must copy some of the memory that's no longer used */ - /* Copy data going backward */ - for (j=0;jfilt_len-1+st->magic_samples[i]+old_magic;j++) - st->mem[i*st->mem_alloc_size+j] = st->mem[i*st->mem_alloc_size+j+st->magic_samples[i]]; - st->magic_samples[i] += old_magic; - } - } - -} - -EXPORT SpeexResamplerState *speex_resampler_init(spx_uint32_t nb_channels, spx_uint32_t in_rate, spx_uint32_t out_rate, int quality, int *err) -{ - return speex_resampler_init_frac(nb_channels, in_rate, out_rate, in_rate, out_rate, quality, err); -} - -EXPORT SpeexResamplerState *speex_resampler_init_frac(spx_uint32_t nb_channels, spx_uint32_t ratio_num, spx_uint32_t ratio_den, spx_uint32_t in_rate, spx_uint32_t out_rate, int quality, int *err) -{ - spx_uint32_t i; - SpeexResamplerState *st; - if (quality > 10 || quality < 0) - { - if (err) - *err = RESAMPLER_ERR_INVALID_ARG; - return NULL; - } - st = (SpeexResamplerState *)speex_alloc(sizeof(SpeexResamplerState)); - st->initialised = 0; - st->started = 0; - st->in_rate = 0; - st->out_rate = 0; - st->num_rate = 0; - st->den_rate = 0; - st->quality = -1; - st->sinc_table_length = 0; - st->mem_alloc_size = 0; - st->filt_len = 0; - st->mem = 0; - st->resampler_ptr = 0; - - st->cutoff = 1.f; - st->nb_channels = nb_channels; - st->in_stride = 1; - st->out_stride = 1; - -#ifdef FIXED_POINT - st->buffer_size = 160; -#else - st->buffer_size = 160; -#endif - - /* Per channel data */ - st->last_sample = (spx_int32_t*)speex_alloc(nb_channels*sizeof(spx_int32_t)); - st->magic_samples = (spx_uint32_t*)speex_alloc(nb_channels*sizeof(spx_uint32_t)); - st->samp_frac_num = (spx_uint32_t*)speex_alloc(nb_channels*sizeof(spx_uint32_t)); - for (i=0;ilast_sample[i] = 0; - st->magic_samples[i] = 0; - st->samp_frac_num[i] = 0; - } - - speex_resampler_set_quality(st, quality); - speex_resampler_set_rate_frac(st, ratio_num, ratio_den, in_rate, out_rate); - - - update_filter(st); - - st->initialised = 1; - if (err) - *err = RESAMPLER_ERR_SUCCESS; - - return st; -} - -EXPORT void speex_resampler_destroy(SpeexResamplerState *st) -{ - speex_free(st->mem); - speex_free(st->sinc_table); - speex_free(st->last_sample); - speex_free(st->magic_samples); - speex_free(st->samp_frac_num); - speex_free(st); -} - -static int speex_resampler_process_native(SpeexResamplerState *st, spx_uint32_t channel_index, spx_uint32_t *in_len, spx_word16_t *out, spx_uint32_t *out_len) -{ - int j=0; - const int N = st->filt_len; - int out_sample = 0; - spx_word16_t *mem = st->mem + channel_index * st->mem_alloc_size; - spx_uint32_t ilen; - - st->started = 1; - - /* Call the right resampler through the function ptr */ - out_sample = st->resampler_ptr(st, channel_index, mem, in_len, out, out_len); - - if (st->last_sample[channel_index] < (spx_int32_t)*in_len) - *in_len = st->last_sample[channel_index]; - *out_len = out_sample; - st->last_sample[channel_index] -= *in_len; - - ilen = *in_len; - - for(j=0;jmagic_samples[channel_index]; - spx_word16_t *mem = st->mem + channel_index * st->mem_alloc_size; - const int N = st->filt_len; - - speex_resampler_process_native(st, channel_index, &tmp_in_len, *out, &out_len); - - st->magic_samples[channel_index] -= tmp_in_len; - - /* If we couldn't process all "magic" input samples, save the rest for next time */ - if (st->magic_samples[channel_index]) - { - spx_uint32_t i; - for (i=0;imagic_samples[channel_index];i++) - mem[N-1+i]=mem[N-1+i+tmp_in_len]; - } - *out += out_len*st->out_stride; - return out_len; -} - -#ifdef FIXED_POINT -EXPORT int speex_resampler_process_int(SpeexResamplerState *st, spx_uint32_t channel_index, const spx_int16_t *in, spx_uint32_t *in_len, spx_int16_t *out, spx_uint32_t *out_len) -#else -EXPORT int speex_resampler_process_float(SpeexResamplerState *st, spx_uint32_t channel_index, const float *in, spx_uint32_t *in_len, float *out, spx_uint32_t *out_len) -#endif -{ - int j; - spx_uint32_t ilen = *in_len; - spx_uint32_t olen = *out_len; - spx_word16_t *x = st->mem + channel_index * st->mem_alloc_size; - const int filt_offs = st->filt_len - 1; - const spx_uint32_t xlen = st->mem_alloc_size - filt_offs; - const int istride = st->in_stride; - - if (st->magic_samples[channel_index]) - olen -= speex_resampler_magic(st, channel_index, &out, olen); - if (! st->magic_samples[channel_index]) { - while (ilen && olen) { - spx_uint32_t ichunk = (ilen > xlen) ? xlen : ilen; - spx_uint32_t ochunk = olen; - - if (in) { - for(j=0;jout_stride; - if (in) - in += ichunk * istride; - } - } - *in_len -= ilen; - *out_len -= olen; - return RESAMPLER_ERR_SUCCESS; -} - -#ifdef FIXED_POINT -EXPORT int speex_resampler_process_float(SpeexResamplerState *st, spx_uint32_t channel_index, const float *in, spx_uint32_t *in_len, float *out, spx_uint32_t *out_len) -#else -EXPORT int speex_resampler_process_int(SpeexResamplerState *st, spx_uint32_t channel_index, const spx_int16_t *in, spx_uint32_t *in_len, spx_int16_t *out, spx_uint32_t *out_len) -#endif -{ - int j; - const int istride_save = st->in_stride; - const int ostride_save = st->out_stride; - spx_uint32_t ilen = *in_len; - spx_uint32_t olen = *out_len; - spx_word16_t *x = st->mem + channel_index * st->mem_alloc_size; - const spx_uint32_t xlen = st->mem_alloc_size - (st->filt_len - 1); -#ifdef VAR_ARRAYS - const unsigned int ylen = (olen < FIXED_STACK_ALLOC) ? olen : FIXED_STACK_ALLOC; - VARDECL(spx_word16_t *ystack); - ALLOC(ystack, ylen, spx_word16_t); -#else - const unsigned int ylen = FIXED_STACK_ALLOC; - spx_word16_t ystack[FIXED_STACK_ALLOC]; -#endif - - st->out_stride = 1; - - while (ilen && olen) { - spx_word16_t *y = ystack; - spx_uint32_t ichunk = (ilen > xlen) ? xlen : ilen; - spx_uint32_t ochunk = (olen > ylen) ? ylen : olen; - spx_uint32_t omagic = 0; - - if (st->magic_samples[channel_index]) { - omagic = speex_resampler_magic(st, channel_index, &y, ochunk); - ochunk -= omagic; - olen -= omagic; - } - if (! st->magic_samples[channel_index]) { - if (in) { - for(j=0;jfilt_len-1]=WORD2INT(in[j*istride_save]); -#else - x[j+st->filt_len-1]=in[j*istride_save]; -#endif - } else { - for(j=0;jfilt_len-1]=0; - } - - speex_resampler_process_native(st, channel_index, &ichunk, y, &ochunk); - } else { - ichunk = 0; - ochunk = 0; - } - - for (j=0;jout_stride = ostride_save; - *in_len -= ilen; - *out_len -= olen; - - return RESAMPLER_ERR_SUCCESS; -} - -EXPORT int speex_resampler_process_interleaved_float(SpeexResamplerState *st, const float *in, spx_uint32_t *in_len, float *out, spx_uint32_t *out_len) -{ - spx_uint32_t i; - int istride_save, ostride_save; - spx_uint32_t bak_out_len = *out_len; - spx_uint32_t bak_in_len = *in_len; - istride_save = st->in_stride; - ostride_save = st->out_stride; - st->in_stride = st->out_stride = st->nb_channels; - for (i=0;inb_channels;i++) - { - *out_len = bak_out_len; - *in_len = bak_in_len; - if (in != NULL) - speex_resampler_process_float(st, i, in+i, in_len, out+i, out_len); - else - speex_resampler_process_float(st, i, NULL, in_len, out+i, out_len); - } - st->in_stride = istride_save; - st->out_stride = ostride_save; - return RESAMPLER_ERR_SUCCESS; -} - -EXPORT int speex_resampler_process_interleaved_int(SpeexResamplerState *st, const spx_int16_t *in, spx_uint32_t *in_len, spx_int16_t *out, spx_uint32_t *out_len) -{ - spx_uint32_t i; - int istride_save, ostride_save; - spx_uint32_t bak_out_len = *out_len; - spx_uint32_t bak_in_len = *in_len; - istride_save = st->in_stride; - ostride_save = st->out_stride; - st->in_stride = st->out_stride = st->nb_channels; - for (i=0;inb_channels;i++) - { - *out_len = bak_out_len; - *in_len = bak_in_len; - if (in != NULL) - speex_resampler_process_int(st, i, in+i, in_len, out+i, out_len); - else - speex_resampler_process_int(st, i, NULL, in_len, out+i, out_len); - } - st->in_stride = istride_save; - st->out_stride = ostride_save; - return RESAMPLER_ERR_SUCCESS; -} - -EXPORT int speex_resampler_set_rate(SpeexResamplerState *st, spx_uint32_t in_rate, spx_uint32_t out_rate) -{ - return speex_resampler_set_rate_frac(st, in_rate, out_rate, in_rate, out_rate); -} - -EXPORT void speex_resampler_get_rate(SpeexResamplerState *st, spx_uint32_t *in_rate, spx_uint32_t *out_rate) -{ - *in_rate = st->in_rate; - *out_rate = st->out_rate; -} - -EXPORT int speex_resampler_set_rate_frac(SpeexResamplerState *st, spx_uint32_t ratio_num, spx_uint32_t ratio_den, spx_uint32_t in_rate, spx_uint32_t out_rate) -{ - spx_uint32_t fact; - spx_uint32_t old_den; - spx_uint32_t i; - if (st->in_rate == in_rate && st->out_rate == out_rate && st->num_rate == ratio_num && st->den_rate == ratio_den) - return RESAMPLER_ERR_SUCCESS; - - old_den = st->den_rate; - st->in_rate = in_rate; - st->out_rate = out_rate; - st->num_rate = ratio_num; - st->den_rate = ratio_den; - /* FIXME: This is terribly inefficient, but who cares (at least for now)? */ - for (fact=2;fact<=IMIN(st->num_rate, st->den_rate);fact++) - { - while ((st->num_rate % fact == 0) && (st->den_rate % fact == 0)) - { - st->num_rate /= fact; - st->den_rate /= fact; - } - } - - if (old_den > 0) - { - for (i=0;inb_channels;i++) - { - st->samp_frac_num[i]=st->samp_frac_num[i]*st->den_rate/old_den; - /* Safety net */ - if (st->samp_frac_num[i] >= st->den_rate) - st->samp_frac_num[i] = st->den_rate-1; - } - } - - if (st->initialised) - update_filter(st); - return RESAMPLER_ERR_SUCCESS; -} - -EXPORT void speex_resampler_get_ratio(SpeexResamplerState *st, spx_uint32_t *ratio_num, spx_uint32_t *ratio_den) -{ - *ratio_num = st->num_rate; - *ratio_den = st->den_rate; -} - -EXPORT int speex_resampler_set_quality(SpeexResamplerState *st, int quality) -{ - if (quality > 10 || quality < 0) - return RESAMPLER_ERR_INVALID_ARG; - if (st->quality == quality) - return RESAMPLER_ERR_SUCCESS; - st->quality = quality; - if (st->initialised) - update_filter(st); - return RESAMPLER_ERR_SUCCESS; -} - -EXPORT void speex_resampler_get_quality(SpeexResamplerState *st, int *quality) -{ - *quality = st->quality; -} - -EXPORT void speex_resampler_set_input_stride(SpeexResamplerState *st, spx_uint32_t stride) -{ - st->in_stride = stride; -} - -EXPORT void speex_resampler_get_input_stride(SpeexResamplerState *st, spx_uint32_t *stride) -{ - *stride = st->in_stride; -} - -EXPORT void speex_resampler_set_output_stride(SpeexResamplerState *st, spx_uint32_t stride) -{ - st->out_stride = stride; -} - -EXPORT void speex_resampler_get_output_stride(SpeexResamplerState *st, spx_uint32_t *stride) -{ - *stride = st->out_stride; -} - -EXPORT int speex_resampler_get_input_latency(SpeexResamplerState *st) -{ - return st->filt_len / 2; -} - -EXPORT int speex_resampler_get_output_latency(SpeexResamplerState *st) -{ - return ((st->filt_len / 2) * st->den_rate + (st->num_rate >> 1)) / st->num_rate; -} - -EXPORT int speex_resampler_skip_zeros(SpeexResamplerState *st) -{ - spx_uint32_t i; - for (i=0;inb_channels;i++) - st->last_sample[i] = st->filt_len/2; - return RESAMPLER_ERR_SUCCESS; -} - -EXPORT int speex_resampler_reset_mem(SpeexResamplerState *st) -{ - spx_uint32_t i; - for (i=0;inb_channels*(st->filt_len-1);i++) - st->mem[i] = 0; - return RESAMPLER_ERR_SUCCESS; -} - -EXPORT const char *speex_resampler_strerror(int err) -{ - switch (err) - { - case RESAMPLER_ERR_SUCCESS: - return "Success."; - case RESAMPLER_ERR_ALLOC_FAILED: - return "Memory allocation failed."; - case RESAMPLER_ERR_BAD_STATE: - return "Bad resampler state."; - case RESAMPLER_ERR_INVALID_ARG: - return "Invalid argument."; - case RESAMPLER_ERR_PTR_OVERLAP: - return "Input and output buffers overlap."; - default: - return "Unknown error. Bad error code or strange version mismatch."; - } -} diff -Nru speex-1.2~rc1.2/libspeex/resample_sse.h speex-1.2.0/libspeex/resample_sse.h --- speex-1.2~rc1.2/libspeex/resample_sse.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/resample_sse.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,128 +0,0 @@ -/* Copyright (C) 2007-2008 Jean-Marc Valin - * Copyright (C) 2008 Thorvald Natvig - */ -/** - @file resample_sse.h - @brief Resampler functions (SSE version) -*/ -/* - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - - Neither the name of the Xiph.org Foundation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR - CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#include - -#define OVERRIDE_INNER_PRODUCT_SINGLE -static inline float inner_product_single(const float *a, const float *b, unsigned int len) -{ - int i; - float ret; - __m128 sum = _mm_setzero_ps(); - for (i=0;i -#define OVERRIDE_INNER_PRODUCT_DOUBLE - -static inline double inner_product_double(const float *a, const float *b, unsigned int len) -{ - int i; - double ret; - __m128d sum = _mm_setzero_pd(); - __m128 t; - for (i=0;iencode_submode = 1; st->submodes=mode->submodes; st->submodeSelect = st->submodeID=mode->defaultSubmode; - + tmp=9; speex_encoder_ctl(st->st_low, SPEEX_SET_QUALITY, &tmp); tmp=1; @@ -233,7 +190,6 @@ st->high=(spx_word16_t*)speex_alloc((st->windowSize-st->frame_size)*sizeof(spx_word16_t)); st->h0_mem=(spx_word16_t*)speex_alloc((QMF_ORDER)*sizeof(spx_word16_t)); - st->h1_mem=(spx_word16_t*)speex_alloc((QMF_ORDER)*sizeof(spx_word16_t)); st->window= lpc_window; @@ -245,7 +201,7 @@ st->pi_gain = (spx_word32_t*)speex_alloc((st->nbSubframes)*sizeof(spx_word32_t)); st->exc_rms = (spx_word16_t*)speex_alloc((st->nbSubframes)*sizeof(spx_word16_t)); st->innov_rms_save = NULL; - + st->mem_sp = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t)); st->mem_sp2 = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t)); st->mem_sw = (spx_mem_t*)speex_alloc((st->lpcSize)*sizeof(spx_mem_t)); @@ -284,7 +240,6 @@ speex_free(st->high); speex_free(st->h0_mem); - speex_free(st->h1_mem); speex_free(st->old_lsp); speex_free(st->old_qlsp); @@ -296,258 +251,517 @@ speex_free(st->mem_sp2); speex_free(st->mem_sw); - + speex_free(st); } - -int sb_encode(void *state, void *vin, SpeexBits *bits) +int sb_encoder_ctl(void *state, int request, void *ptr) { SBEncState *st; - int i, roots, sub; - char *stack; - VARDECL(spx_mem_t *mem); - VARDECL(spx_sig_t *innov); - VARDECL(spx_word16_t *target); - VARDECL(spx_word16_t *syn_resp); - VARDECL(spx_word32_t *low_pi_gain); - spx_word16_t *low; - spx_word16_t *high; - VARDECL(spx_word16_t *low_exc_rms); - VARDECL(spx_word16_t *low_innov_rms); - const SpeexSBMode *mode; - spx_int32_t dtx; - spx_word16_t *in = (spx_word16_t*)vin; - spx_word16_t e_low=0, e_high=0; - VARDECL(spx_coef_t *lpc); - VARDECL(spx_coef_t *interp_lpc); - VARDECL(spx_coef_t *bw_lpc1); - VARDECL(spx_coef_t *bw_lpc2); - VARDECL(spx_lsp_t *lsp); - VARDECL(spx_lsp_t *qlsp); - VARDECL(spx_lsp_t *interp_lsp); - VARDECL(spx_lsp_t *interp_qlsp); - - st = (SBEncState*)state; - stack=st->stack; - mode = (const SpeexSBMode*)(st->mode->mode); - low = in; - high = in+st->frame_size; - - /* High-band buffering / sync with low band */ - /* Compute the two sub-bands by filtering with QMF h0*/ - qmf_decomp(in, h0, low, high, st->full_frame_size, QMF_ORDER, st->h0_mem, stack); - -#ifndef DISABLE_VBR - if (st->vbr_enabled || st->vad_enabled) + st=(SBEncState*)state; + switch(request) { - /* Need to compute things here before the signal is trashed by the encoder */ - /*FIXME: Are the two signals (low, high) in sync? */ - e_low = compute_rms16(low, st->frame_size); - e_high = compute_rms16(high, st->frame_size); - } + case SPEEX_GET_FRAME_SIZE: + (*(spx_int32_t*)ptr) = st->full_frame_size; + break; + case SPEEX_SET_HIGH_MODE: + st->submodeSelect = st->submodeID = (*(spx_int32_t*)ptr); + break; + case SPEEX_SET_LOW_MODE: + speex_encoder_ctl(st->st_low, SPEEX_SET_LOW_MODE, ptr); + break; + case SPEEX_SET_DTX: + speex_encoder_ctl(st->st_low, SPEEX_SET_DTX, ptr); + break; + case SPEEX_GET_DTX: + speex_encoder_ctl(st->st_low, SPEEX_GET_DTX, ptr); + break; + case SPEEX_GET_LOW_MODE: + speex_encoder_ctl(st->st_low, SPEEX_GET_LOW_MODE, ptr); + break; + case SPEEX_SET_MODE: + speex_encoder_ctl(st, SPEEX_SET_QUALITY, ptr); + break; +#ifndef DISABLE_VBR + case SPEEX_SET_VBR: + st->vbr_enabled = (*(spx_int32_t*)ptr); + speex_encoder_ctl(st->st_low, SPEEX_SET_VBR, ptr); + break; + case SPEEX_GET_VBR: + (*(spx_int32_t*)ptr) = st->vbr_enabled; + break; + case SPEEX_SET_VAD: + st->vad_enabled = (*(spx_int32_t*)ptr); + speex_encoder_ctl(st->st_low, SPEEX_SET_VAD, ptr); + break; + case SPEEX_GET_VAD: + (*(spx_int32_t*)ptr) = st->vad_enabled; + break; #endif /* #ifndef DISABLE_VBR */ - - ALLOC(low_innov_rms, st->nbSubframes, spx_word16_t); - speex_encoder_ctl(st->st_low, SPEEX_SET_INNOVATION_SAVE, low_innov_rms); - /* Encode the narrowband part*/ - speex_encode_native(st->st_low, low, bits); - - high = high - (st->windowSize-st->frame_size); - SPEEX_COPY(high, st->high, st->windowSize-st->frame_size); - SPEEX_COPY(st->high, &high[st->frame_size], st->windowSize-st->frame_size); - - - ALLOC(low_pi_gain, st->nbSubframes, spx_word32_t); - ALLOC(low_exc_rms, st->nbSubframes, spx_word16_t); - speex_encoder_ctl(st->st_low, SPEEX_GET_PI_GAIN, low_pi_gain); - speex_encoder_ctl(st->st_low, SPEEX_GET_EXC, low_exc_rms); - - speex_encoder_ctl(st->st_low, SPEEX_GET_LOW_MODE, &dtx); - - if (dtx==0) - dtx=1; - else - dtx=0; - - ALLOC(lpc, st->lpcSize, spx_coef_t); - ALLOC(interp_lpc, st->lpcSize, spx_coef_t); - ALLOC(bw_lpc1, st->lpcSize, spx_coef_t); - ALLOC(bw_lpc2, st->lpcSize, spx_coef_t); - - ALLOC(lsp, st->lpcSize, spx_lsp_t); - ALLOC(qlsp, st->lpcSize, spx_lsp_t); - ALLOC(interp_lsp, st->lpcSize, spx_lsp_t); - ALLOC(interp_qlsp, st->lpcSize, spx_lsp_t); - - { - VARDECL(spx_word16_t *autocorr); - VARDECL(spx_word16_t *w_sig); - ALLOC(autocorr, st->lpcSize+1, spx_word16_t); - ALLOC(w_sig, st->windowSize, spx_word16_t); - /* Window for analysis */ - /* FIXME: This is a kludge */ - if (st->subframeSize==80) +#if !defined(DISABLE_VBR) && !defined(DISABLE_FLOAT_API) + case SPEEX_SET_VBR_QUALITY: { - for (i=0;iwindowSize;i++) - w_sig[i] = EXTRACT16(SHR32(MULT16_16(high[i],st->window[i>>1]),SIG_SHIFT)); - } else { - for (i=0;iwindowSize;i++) - w_sig[i] = EXTRACT16(SHR32(MULT16_16(high[i],st->window[i]),SIG_SHIFT)); - } - /* Compute auto-correlation */ - _spx_autocorr(w_sig, autocorr, st->lpcSize+1, st->windowSize); - autocorr[0] = ADD16(autocorr[0],MULT16_16_Q15(autocorr[0],st->lpc_floor)); /* Noise floor in auto-correlation domain */ - - /* Lag windowing: equivalent to filtering in the power-spectrum domain */ - for (i=0;ilpcSize+1;i++) - autocorr[i] = MULT16_16_Q14(autocorr[i],st->lagWindow[i]); - - /* Levinson-Durbin */ - _spx_lpc(lpc, autocorr, st->lpcSize); - } - - /* LPC to LSPs (x-domain) transform */ - roots=lpc_to_lsp (lpc, st->lpcSize, lsp, 10, LSP_DELTA1, stack); - if (roots!=st->lpcSize) - { - roots = lpc_to_lsp (lpc, st->lpcSize, lsp, 10, LSP_DELTA2, stack); - if (roots!=st->lpcSize) { - /*If we can't find all LSP's, do some damage control and use a flat filter*/ - for (i=0;ilpcSize;i++) - { - lsp[i]=st->old_lsp[i]; - } + spx_int32_t q; + float qual = (*(float*)ptr)+.6; + st->vbr_quality = (*(float*)ptr); + if (qual>10) + qual=10; + q=(int)floor(.5+*(float*)ptr); + if (q>10) + q=10; + speex_encoder_ctl(st->st_low, SPEEX_SET_VBR_QUALITY, &qual); + speex_encoder_ctl(state, SPEEX_SET_QUALITY, &q); + break; } - } - + case SPEEX_GET_VBR_QUALITY: + (*(float*)ptr) = st->vbr_quality; + break; +#endif /* #if !defined(DISABLE_VBR) && !defined(DISABLE_FLOAT_API) */ #ifndef DISABLE_VBR - /* VBR code */ - if ((st->vbr_enabled || st->vad_enabled) && !dtx) - { - float ratio; - if (st->abr_enabled) + case SPEEX_SET_ABR: + st->abr_enabled = (*(spx_int32_t*)ptr); + st->vbr_enabled = st->abr_enabled!=0; + speex_encoder_ctl(st->st_low, SPEEX_SET_VBR, &st->vbr_enabled); + if (st->vbr_enabled) { - float qual_change=0; - if (st->abr_drift2 * st->abr_drift > 0) + spx_int32_t i=10, rate, target; + float vbr_qual; + target = (*(spx_int32_t*)ptr); + while (i>=0) { - /* Only adapt if long-term and short-term drift are the same sign */ - qual_change = -.00001*st->abr_drift/(1+st->abr_count); - if (qual_change>.1) - qual_change=.1; - if (qual_change<-.1) - qual_change=-.1; + speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i); + speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate); + if (rate <= target) + break; + i--; } - st->vbr_quality += qual_change; - if (st->vbr_quality>10) - st->vbr_quality=10; - if (st->vbr_quality<0) - st->vbr_quality=0; + vbr_qual=i; + if (vbr_qual<0) + vbr_qual=0; + speex_encoder_ctl(st, SPEEX_SET_VBR_QUALITY, &vbr_qual); + st->abr_count=0; + st->abr_drift=0; + st->abr_drift2=0; } + break; + case SPEEX_GET_ABR: + (*(spx_int32_t*)ptr) = st->abr_enabled; + break; +#endif /* #ifndef DISABLE_VBR */ - ratio = 2*log((1.f+e_high)/(1.f+e_low)); - - speex_encoder_ctl(st->st_low, SPEEX_GET_RELATIVE_QUALITY, &st->relative_quality); - if (ratio<-4) - ratio=-4; - if (ratio>2) - ratio=2; - /*if (ratio>-2)*/ - if (st->vbr_enabled) + case SPEEX_SET_QUALITY: { - spx_int32_t modeid; - modeid = mode->nb_modes-1; - st->relative_quality+=1.0*(ratio+2); - if (st->relative_quality<-1) - st->relative_quality=-1; - while (modeid) + spx_int32_t nb_qual; + int quality = (*(spx_int32_t*)ptr); + if (quality < 0) + quality = 0; + if (quality > 10) + quality = 10; + st->submodeSelect = st->submodeID = ((const SpeexSBMode*)(st->mode->mode))->quality_map[quality]; + nb_qual = ((const SpeexSBMode*)(st->mode->mode))->low_quality_map[quality]; + speex_encoder_ctl(st->st_low, SPEEX_SET_MODE, &nb_qual); + } + break; + case SPEEX_SET_COMPLEXITY: + speex_encoder_ctl(st->st_low, SPEEX_SET_COMPLEXITY, ptr); + st->complexity = (*(spx_int32_t*)ptr); + if (st->complexity<1) + st->complexity=1; + break; + case SPEEX_GET_COMPLEXITY: + (*(spx_int32_t*)ptr) = st->complexity; + break; + case SPEEX_SET_BITRATE: + { + spx_int32_t i=10; + spx_int32_t rate, target; + target = (*(spx_int32_t*)ptr); + while (i>=0) { - int v1; - float thresh; - v1=(int)floor(st->vbr_quality); - if (v1==10) - thresh = mode->vbr_thresh[modeid][v1]; - else - thresh = (st->vbr_quality-v1) * mode->vbr_thresh[modeid][v1+1] + - (1+v1-st->vbr_quality) * mode->vbr_thresh[modeid][v1]; - if (st->relative_quality >= thresh && st->sampling_rate*st->submodes[modeid]->bits_per_frame/st->full_frame_size <= st->vbr_max_high) + speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i); + speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate); + if (rate <= target) break; - modeid--; + i--; } - speex_encoder_ctl(state, SPEEX_SET_HIGH_MODE, &modeid); - if (st->abr_enabled) + } + break; + case SPEEX_GET_BITRATE: + speex_encoder_ctl(st->st_low, request, ptr); + /*fprintf (stderr, "before: %d\n", (*(int*)ptr));*/ + if (st->submodes[st->submodeID]) + (*(spx_int32_t*)ptr) += st->sampling_rate*SUBMODE(bits_per_frame)/st->full_frame_size; + else + (*(spx_int32_t*)ptr) += st->sampling_rate*(SB_SUBMODE_BITS+1)/st->full_frame_size; + /*fprintf (stderr, "after: %d\n", (*(int*)ptr));*/ + break; + case SPEEX_SET_SAMPLING_RATE: + { + spx_int32_t tmp=(*(spx_int32_t*)ptr); + st->sampling_rate = tmp; + tmp>>=1; + speex_encoder_ctl(st->st_low, SPEEX_SET_SAMPLING_RATE, &tmp); + } + break; + case SPEEX_GET_SAMPLING_RATE: + (*(spx_int32_t*)ptr)=st->sampling_rate; + break; + case SPEEX_RESET_STATE: + { + int i; + st->first = 1; + for (i=0;ilpcSize;i++) + st->old_lsp[i]= DIV32(MULT16_16(QCONST16(3.1415927f, LSP_SHIFT), i+1), st->lpcSize+1); + for (i=0;ilpcSize;i++) + st->mem_sw[i]=st->mem_sp[i]=st->mem_sp2[i]=0; + for (i=0;ih0_mem[i]=0; + } + break; + case SPEEX_SET_SUBMODE_ENCODING: + st->encode_submode = (*(spx_int32_t*)ptr); + speex_encoder_ctl(st->st_low, SPEEX_SET_SUBMODE_ENCODING, ptr); + break; + case SPEEX_GET_SUBMODE_ENCODING: + (*(spx_int32_t*)ptr) = st->encode_submode; + break; + case SPEEX_GET_LOOKAHEAD: + speex_encoder_ctl(st->st_low, SPEEX_GET_LOOKAHEAD, ptr); + (*(spx_int32_t*)ptr) = 2*(*(spx_int32_t*)ptr) + QMF_ORDER - 1; + break; + case SPEEX_SET_PLC_TUNING: + speex_encoder_ctl(st->st_low, SPEEX_SET_PLC_TUNING, ptr); + break; + case SPEEX_GET_PLC_TUNING: + speex_encoder_ctl(st->st_low, SPEEX_GET_PLC_TUNING, ptr); + break; +#ifndef DISABLE_VBR + case SPEEX_SET_VBR_MAX_BITRATE: + { + st->vbr_max = (*(spx_int32_t*)ptr); + if (SPEEX_SET_VBR_MAX_BITRATE<1) { - spx_int32_t bitrate; - speex_encoder_ctl(state, SPEEX_GET_BITRATE, &bitrate); - st->abr_drift+=(bitrate-st->abr_enabled); - st->abr_drift2 = .95*st->abr_drift2 + .05*(bitrate-st->abr_enabled); - st->abr_count += 1.0; + speex_encoder_ctl(st->st_low, SPEEX_SET_VBR_MAX_BITRATE, &st->vbr_max); + st->vbr_max_high = 17600; + } else { + spx_int32_t low_rate; + if (st->vbr_max >= 42200) + { + st->vbr_max_high = 17600; + } else if (st->vbr_max >= 27800) + { + st->vbr_max_high = 9600; + } else if (st->vbr_max > 20600) + { + st->vbr_max_high = 5600; + } else { + st->vbr_max_high = 1800; + } + if (st->subframeSize==80) + st->vbr_max_high = 1800; + low_rate = st->vbr_max - st->vbr_max_high; + speex_encoder_ctl(st->st_low, SPEEX_SET_VBR_MAX_BITRATE, &low_rate); } + } + break; + case SPEEX_GET_VBR_MAX_BITRATE: + (*(spx_int32_t*)ptr) = st->vbr_max; + break; +#endif /* #ifndef DISABLE_VBR */ + case SPEEX_SET_HIGHPASS: + speex_encoder_ctl(st->st_low, SPEEX_SET_HIGHPASS, ptr); + break; + case SPEEX_GET_HIGHPASS: + speex_encoder_ctl(st->st_low, SPEEX_GET_HIGHPASS, ptr); + break; - } else { - /* VAD only */ - int modeid; - if (st->relative_quality<2.0) - modeid=1; - else - modeid=st->submodeSelect; - /*speex_encoder_ctl(state, SPEEX_SET_MODE, &mode);*/ - st->submodeID=modeid; + /* This is all internal stuff past this point */ + case SPEEX_GET_PI_GAIN: + { + int i; + spx_word32_t *g = (spx_word32_t*)ptr; + for (i=0;inbSubframes;i++) + g[i]=st->pi_gain[i]; } - /*fprintf (stderr, "%f %f\n", ratio, low_qual);*/ - } + break; + case SPEEX_GET_EXC: + { + int i; + for (i=0;inbSubframes;i++) + ((spx_word16_t*)ptr)[i] = st->exc_rms[i]; + } + break; +#ifndef DISABLE_VBR + case SPEEX_GET_RELATIVE_QUALITY: + (*(float*)ptr)=st->relative_quality; + break; #endif /* #ifndef DISABLE_VBR */ - - if (st->encode_submode) - { - speex_bits_pack(bits, 1, 1); - if (dtx) - speex_bits_pack(bits, 0, SB_SUBMODE_BITS); - else - speex_bits_pack(bits, st->submodeID, SB_SUBMODE_BITS); + case SPEEX_SET_INNOVATION_SAVE: + st->innov_rms_save = (spx_word16_t*)ptr; + break; + case SPEEX_SET_WIDEBAND: + speex_encoder_ctl(st->st_low, SPEEX_SET_WIDEBAND, ptr); + break; + case SPEEX_GET_STACK: + *((char**)ptr) = st->stack; + break; + default: + speex_warning_int("Unknown nb_ctl request: ", request); + return -1; } + return 0; +} - /* If null mode (no transmission), just set a couple things to zero*/ - if (dtx || st->submodes[st->submodeID] == NULL) - { - for (i=0;iframe_size;i++) - high[i]=VERY_SMALL; - - for (i=0;ilpcSize;i++) - st->mem_sw[i]=0; - st->first=1; - - /* Final signal synthesis from excitation */ - iir_mem16(high, st->interp_qlpc, high, st->frame_size, st->lpcSize, st->mem_sp, stack); - if (dtx) - return 0; - else - return 1; - } +int sb_encode(void *state, void *vin, SpeexBits *bits) +{ + SBEncState *st; + int i, roots, sub; + char *stack; + VARDECL(spx_mem_t *mem); + VARDECL(spx_sig_t *innov); + VARDECL(spx_word16_t *target); + VARDECL(spx_word16_t *syn_resp); + VARDECL(spx_word32_t *low_pi_gain); + spx_word16_t *low; + spx_word16_t *high; + VARDECL(spx_word16_t *low_exc_rms); + VARDECL(spx_word16_t *low_innov_rms); + const SpeexSBMode *mode; + spx_int32_t dtx; + spx_word16_t *in = (spx_word16_t*)vin; + spx_word16_t e_low=0, e_high=0; + VARDECL(spx_coef_t *lpc); + VARDECL(spx_coef_t *interp_lpc); + VARDECL(spx_coef_t *bw_lpc1); + VARDECL(spx_coef_t *bw_lpc2); + VARDECL(spx_lsp_t *lsp); + VARDECL(spx_lsp_t *qlsp); + VARDECL(spx_lsp_t *interp_lsp); + VARDECL(spx_lsp_t *interp_qlsp); + st = (SBEncState*)state; + stack=st->stack; + mode = (const SpeexSBMode*)(st->mode->mode); + low = in; + high = in+st->frame_size; - /* LSP quantization */ - SUBMODE(lsp_quant)(lsp, qlsp, st->lpcSize, bits); + /* High-band buffering / sync with low band */ + /* Compute the two sub-bands by filtering with QMF h0*/ + qmf_decomp(in, h0, low, high, st->full_frame_size, QMF_ORDER, st->h0_mem, stack); - if (st->first) +#ifndef DISABLE_VBR + if (st->vbr_enabled || st->vad_enabled) { - for (i=0;ilpcSize;i++) - st->old_lsp[i] = lsp[i]; - for (i=0;ilpcSize;i++) - st->old_qlsp[i] = qlsp[i]; + /* Need to compute things here before the signal is trashed by the encoder */ + /*FIXME: Are the two signals (low, high) in sync? */ + e_low = compute_rms16(low, st->frame_size); + e_high = compute_rms16(high, st->frame_size); } - - ALLOC(mem, st->lpcSize, spx_mem_t); - ALLOC(syn_resp, st->subframeSize, spx_word16_t); - ALLOC(innov, st->subframeSize, spx_sig_t); - ALLOC(target, st->subframeSize, spx_word16_t); +#endif /* #ifndef DISABLE_VBR */ - for (sub=0;subnbSubframes;sub++) - { - VARDECL(spx_word16_t *exc); + ALLOC(low_innov_rms, st->nbSubframes, spx_word16_t); + speex_encoder_ctl(st->st_low, SPEEX_SET_INNOVATION_SAVE, low_innov_rms); + /* Encode the narrowband part*/ + speex_encode_native(st->st_low, low, bits); + + high = high - (st->windowSize-st->frame_size); + SPEEX_COPY(high, st->high, st->windowSize-st->frame_size); + SPEEX_COPY(st->high, &high[st->frame_size], st->windowSize-st->frame_size); + + + ALLOC(low_pi_gain, st->nbSubframes, spx_word32_t); + ALLOC(low_exc_rms, st->nbSubframes, spx_word16_t); + speex_encoder_ctl(st->st_low, SPEEX_GET_PI_GAIN, low_pi_gain); + speex_encoder_ctl(st->st_low, SPEEX_GET_EXC, low_exc_rms); + + speex_encoder_ctl(st->st_low, SPEEX_GET_LOW_MODE, &dtx); + + if (dtx==0) + dtx=1; + else + dtx=0; + + ALLOC(lpc, st->lpcSize, spx_coef_t); + ALLOC(interp_lpc, st->lpcSize, spx_coef_t); + ALLOC(bw_lpc1, st->lpcSize, spx_coef_t); + ALLOC(bw_lpc2, st->lpcSize, spx_coef_t); + + ALLOC(lsp, st->lpcSize, spx_lsp_t); + ALLOC(qlsp, st->lpcSize, spx_lsp_t); + ALLOC(interp_lsp, st->lpcSize, spx_lsp_t); + ALLOC(interp_qlsp, st->lpcSize, spx_lsp_t); + + { + VARDECL(spx_word16_t *autocorr); + VARDECL(spx_word16_t *w_sig); + ALLOC(autocorr, st->lpcSize+1, spx_word16_t); + ALLOC(w_sig, st->windowSize, spx_word16_t); + /* Window for analysis */ + /* FIXME: This is a kludge */ + if (st->subframeSize==80) + { + for (i=0;iwindowSize;i++) + w_sig[i] = EXTRACT16(SHR32(MULT16_16(high[i],st->window[i>>1]),SIG_SHIFT)); + } else { + for (i=0;iwindowSize;i++) + w_sig[i] = EXTRACT16(SHR32(MULT16_16(high[i],st->window[i]),SIG_SHIFT)); + } + /* Compute auto-correlation */ + _spx_autocorr(w_sig, autocorr, st->lpcSize+1, st->windowSize); + autocorr[0] = ADD16(autocorr[0],MULT16_16_Q15(autocorr[0],st->lpc_floor)); /* Noise floor in auto-correlation domain */ + + /* Lag windowing: equivalent to filtering in the power-spectrum domain */ + for (i=0;ilpcSize+1;i++) + autocorr[i] = MULT16_16_Q14(autocorr[i],st->lagWindow[i]); + + /* Levinson-Durbin */ + _spx_lpc(lpc, autocorr, st->lpcSize); + } + + /* LPC to LSPs (x-domain) transform */ + roots=lpc_to_lsp (lpc, st->lpcSize, lsp, 10, LSP_DELTA1, stack); + if (roots!=st->lpcSize) + { + roots = lpc_to_lsp (lpc, st->lpcSize, lsp, 10, LSP_DELTA2, stack); + if (roots!=st->lpcSize) { + /*If we can't find all LSP's, do some damage control and use a flat filter*/ + for (i=0;ilpcSize;i++) + { + lsp[i]=st->old_lsp[i]; + } + } + } + +#ifndef DISABLE_VBR + /* VBR code */ + if ((st->vbr_enabled || st->vad_enabled) && !dtx) + { + float ratio; + if (st->abr_enabled) + { + float qual_change=0; + if (st->abr_drift2 * st->abr_drift > 0) + { + /* Only adapt if long-term and short-term drift are the same sign */ + qual_change = -.00001*st->abr_drift/(1+st->abr_count); + if (qual_change>.1) + qual_change=.1; + if (qual_change<-.1) + qual_change=-.1; + } + st->vbr_quality += qual_change; + if (st->vbr_quality>10) + st->vbr_quality=10; + if (st->vbr_quality<0) + st->vbr_quality=0; + } + + + ratio = 2*log((1.f+e_high)/(1.f+e_low)); + + speex_encoder_ctl(st->st_low, SPEEX_GET_RELATIVE_QUALITY, &st->relative_quality); + if (ratio<-4) + ratio=-4; + if (ratio>2) + ratio=2; + /*if (ratio>-2)*/ + if (st->vbr_enabled) + { + spx_int32_t modeid; + modeid = mode->nb_modes-1; + st->relative_quality+=1.0*(ratio+2); + if (st->relative_quality<-1) + st->relative_quality=-1; + while (modeid) + { + int v1; + float thresh; + v1=(int)floor(st->vbr_quality); + if (v1==10) + thresh = mode->vbr_thresh[modeid][v1]; + else + thresh = (st->vbr_quality-v1) * mode->vbr_thresh[modeid][v1+1] + + (1+v1-st->vbr_quality) * mode->vbr_thresh[modeid][v1]; + if (st->relative_quality >= thresh && st->sampling_rate*st->submodes[modeid]->bits_per_frame/st->full_frame_size <= st->vbr_max_high) + break; + modeid--; + } + speex_encoder_ctl(state, SPEEX_SET_HIGH_MODE, &modeid); + if (st->abr_enabled) + { + spx_int32_t bitrate; + speex_encoder_ctl(state, SPEEX_GET_BITRATE, &bitrate); + st->abr_drift+=(bitrate-st->abr_enabled); + st->abr_drift2 = .95*st->abr_drift2 + .05*(bitrate-st->abr_enabled); + st->abr_count += 1.0; + } + + } else { + /* VAD only */ + int modeid; + if (st->relative_quality<2.0) + modeid=1; + else + modeid=st->submodeSelect; + /*speex_encoder_ctl(state, SPEEX_SET_MODE, &mode);*/ + st->submodeID=modeid; + + } + /*fprintf (stderr, "%f %f\n", ratio, low_qual);*/ + } +#endif /* #ifndef DISABLE_VBR */ + + if (st->encode_submode) + { + speex_bits_pack(bits, 1, 1); + if (dtx) + speex_bits_pack(bits, 0, SB_SUBMODE_BITS); + else + speex_bits_pack(bits, st->submodeID, SB_SUBMODE_BITS); + } + + /* If null mode (no transmission), just set a couple things to zero*/ + if (dtx || st->submodes[st->submodeID] == NULL) + { + for (i=0;iframe_size;i++) + high[i]=VERY_SMALL; + + for (i=0;ilpcSize;i++) + st->mem_sw[i]=0; + st->first=1; + + /* Final signal synthesis from excitation */ + iir_mem16(high, st->interp_qlpc, high, st->frame_size, st->lpcSize, st->mem_sp, stack); + + if (dtx) + return 0; + else + return 1; + } + + + /* LSP quantization */ + SUBMODE(lsp_quant)(lsp, qlsp, st->lpcSize, bits); + + if (st->first) + { + for (i=0;ilpcSize;i++) + st->old_lsp[i] = lsp[i]; + for (i=0;ilpcSize;i++) + st->old_qlsp[i] = qlsp[i]; + } + + ALLOC(mem, st->lpcSize, spx_mem_t); + ALLOC(syn_resp, st->subframeSize, spx_word16_t); + ALLOC(innov, st->subframeSize, spx_sig_t); + ALLOC(target, st->subframeSize, spx_word16_t); + + for (sub=0;subnbSubframes;sub++) + { + VARDECL(spx_word16_t *exc); VARDECL(spx_word16_t *res); VARDECL(spx_word16_t *sw); spx_word16_t *sp; @@ -561,13 +775,10 @@ ALLOC(exc, st->subframeSize, spx_word16_t); ALLOC(res, st->subframeSize, spx_word16_t); ALLOC(sw, st->subframeSize, spx_word16_t); - - /* LSP interpolation (quantized and unquantized) */ - lsp_interpolate(st->old_lsp, lsp, interp_lsp, st->lpcSize, sub, st->nbSubframes); - lsp_interpolate(st->old_qlsp, qlsp, interp_qlsp, st->lpcSize, sub, st->nbSubframes); - lsp_enforce_margin(interp_lsp, st->lpcSize, LSP_MARGIN); - lsp_enforce_margin(interp_qlsp, st->lpcSize, LSP_MARGIN); + /* LSP interpolation (quantized and unquantized) */ + lsp_interpolate(st->old_lsp, lsp, interp_lsp, st->lpcSize, sub, st->nbSubframes, LSP_MARGIN); + lsp_interpolate(st->old_qlsp, qlsp, interp_qlsp, st->lpcSize, sub, st->nbSubframes, LSP_MARGIN); lsp_to_lpc(interp_lsp, interp_lpc, st->lpcSize,stack); lsp_to_lpc(interp_qlsp, st->interp_qlpc, st->lpcSize, stack); @@ -584,14 +795,14 @@ rh += st->interp_qlpc[i+1] - st->interp_qlpc[i]; st->pi_gain[sub] += st->interp_qlpc[i] + st->interp_qlpc[i+1]; } - + rl = low_pi_gain[sub]; #ifdef FIXED_POINT filter_ratio=EXTRACT16(SATURATE(PDIV32(SHL32(ADD32(rl,82),7),ADD32(82,rh)),32767)); #else filter_ratio=(rl+.01)/(rh+.01); #endif - + /* Compute "real excitation" */ fir_mem16(sp, st->interp_qlpc, exc, st->subframeSize, st->lpcSize, st->mem_sp2, stack); /* Compute energy of low-band and high-band excitation */ @@ -605,7 +816,7 @@ /* Gain to use if we want to use the low-band excitation for high-band */ g=PDIV32(MULT16_16(filter_ratio,eh),EXTEND32(ADD16(1,el))); - + #if 0 { char *tmp_stack=stack; @@ -662,11 +873,11 @@ compute_impulse_response(st->interp_qlpc, bw_lpc1, bw_lpc2, syn_resp, st->subframeSize, st->lpcSize, stack); - + /* Reset excitation */ for (i=0;isubframeSize;i++) res[i]=VERY_SMALL; - + /* Compute zero response (ringing) of A(z/g1) / ( A(z/g2) * Aq(z) ) */ for (i=0;ilpcSize;i++) mem[i]=st->mem_sp[i]; @@ -691,8 +902,8 @@ SPEEX_MEMSET(innov, 0, st->subframeSize); /*print_vec(target, st->subframeSize, "\ntarget");*/ - SUBMODE(innovation_quant)(target, st->interp_qlpc, bw_lpc1, bw_lpc2, - SUBMODE(innovation_params), st->lpcSize, st->subframeSize, + SUBMODE(innovation_quant)(target, st->interp_qlpc, bw_lpc1, bw_lpc2, + SUBMODE(innovation_params), st->lpcSize, st->subframeSize, innov, syn_resp, bits, stack, st->complexity, SUBMODE(double_codebook)); /*print_vec(target, st->subframeSize, "after");*/ @@ -706,8 +917,8 @@ for (i=0;isubframeSize;i++) target[i]=MULT16_16_P13(QCONST16(2.5f,13), target[i]); - SUBMODE(innovation_quant)(target, st->interp_qlpc, bw_lpc1, bw_lpc2, - SUBMODE(innovation_params), st->lpcSize, st->subframeSize, + SUBMODE(innovation_quant)(target, st->interp_qlpc, bw_lpc1, bw_lpc2, + SUBMODE(innovation_params), st->lpcSize, st->subframeSize, innov2, syn_resp, bits, stack, st->complexity, 0); signal_mul(innov2, innov2, MULT16_32_P15(QCONST16(0.4f,15),scale), st->subframeSize); @@ -723,17 +934,17 @@ st->innov_rms_save[sub] = MULT16_16_Q15(QCONST16(.70711f, 15), compute_rms(innov, st->subframeSize)); } st->exc_rms[sub] = compute_rms16(exc, st->subframeSize); - + } - + /*Keep the previous memory*/ for (i=0;ilpcSize;i++) mem[i]=st->mem_sp[i]; /* Final signal synthesis from excitation */ iir_mem16(exc, st->interp_qlpc, sp, st->subframeSize, st->lpcSize, st->mem_sp, stack); - + /* Compute weighted signal again, from synthesized speech (not sure it's the right thing) */ filter_mem16(sp, bw_lpc1, bw_lpc2, sw, st->subframeSize, st->lpcSize, st->mem_sw, stack); } @@ -748,10 +959,10 @@ return 1; } +#endif /* DISABLE_ENCODER */ - - +#ifndef DISABLE_DECODER void *sb_decoder_init(const SpeexMode *m) { spx_int32_t tmp; @@ -798,7 +1009,7 @@ st->pi_gain = (spx_word32_t*)speex_alloc((st->nbSubframes)*sizeof(spx_word32_t)); st->exc_rms = (spx_word16_t*)speex_alloc((st->nbSubframes)*sizeof(spx_word16_t)); st->mem_sp = (spx_mem_t*)speex_alloc((2*st->lpcSize)*sizeof(spx_mem_t)); - + st->innov_save = NULL; @@ -832,62 +1043,192 @@ speex_free(state); } -static void sb_decode_lost(SBDecState *st, spx_word16_t *out, int dtx, char *stack) -{ - int i; - int saved_modeid=0; - - if (dtx) - { - saved_modeid=st->submodeID; - st->submodeID=1; - } else { - bw_lpc(QCONST16(0.99f,15), st->interp_qlpc, st->interp_qlpc, st->lpcSize); - } - - st->first=1; - - - /* Final signal synthesis from excitation */ - if (!dtx) - { - st->last_ener = MULT16_16_Q15(QCONST16(.9f,15),st->last_ener); - } - for (i=0;iframe_size;i++) - out[i+st->frame_size] = speex_rand(st->last_ener, &st->seed); - - iir_mem16(out+st->frame_size, st->interp_qlpc, out+st->frame_size, st->frame_size, st->lpcSize, - st->mem_sp, stack); - - - /* Reconstruct the original */ - qmf_synth(out, out+st->frame_size, h0, out, st->full_frame_size, QMF_ORDER, st->g0_mem, st->g1_mem, stack); - if (dtx) - { - st->submodeID=saved_modeid; - } - return; -} -int sb_decode(void *state, SpeexBits *bits, void *vout) +int sb_decoder_ctl(void *state, int request, void *ptr) { - int i, sub; SBDecState *st; - int wideband; - int ret; - char *stack; - VARDECL(spx_word32_t *low_pi_gain); - VARDECL(spx_word16_t *low_exc_rms); - VARDECL(spx_coef_t *ak); - VARDECL(spx_lsp_t *qlsp); - VARDECL(spx_lsp_t *interp_qlsp); - spx_int32_t dtx; - const SpeexSBMode *mode; - spx_word16_t *out = (spx_word16_t*)vout; - spx_word16_t *low_innov_alias; + st=(SBDecState*)state; + switch(request) + { + case SPEEX_SET_HIGH_MODE: + st->submodeID = (*(spx_int32_t*)ptr); + break; + case SPEEX_SET_LOW_MODE: + speex_decoder_ctl(st->st_low, SPEEX_SET_LOW_MODE, ptr); + break; + case SPEEX_GET_LOW_MODE: + speex_decoder_ctl(st->st_low, SPEEX_GET_LOW_MODE, ptr); + break; + case SPEEX_GET_FRAME_SIZE: + (*(spx_int32_t*)ptr) = st->full_frame_size; + break; + case SPEEX_SET_ENH: + speex_decoder_ctl(st->st_low, request, ptr); + st->lpc_enh_enabled = *((spx_int32_t*)ptr); + break; + case SPEEX_GET_ENH: + *((spx_int32_t*)ptr) = st->lpc_enh_enabled; + break; + case SPEEX_SET_MODE: + case SPEEX_SET_QUALITY: + { + spx_int32_t nb_qual; + int quality = (*(spx_int32_t*)ptr); + if (quality < 0) + quality = 0; + if (quality > 10) + quality = 10; + st->submodeID = ((const SpeexSBMode*)(st->mode->mode))->quality_map[quality]; + nb_qual = ((const SpeexSBMode*)(st->mode->mode))->low_quality_map[quality]; + speex_decoder_ctl(st->st_low, SPEEX_SET_MODE, &nb_qual); + } + break; + case SPEEX_GET_BITRATE: + speex_decoder_ctl(st->st_low, request, ptr); + if (st->submodes[st->submodeID]) + (*(spx_int32_t*)ptr) += st->sampling_rate*SUBMODE(bits_per_frame)/st->full_frame_size; + else + (*(spx_int32_t*)ptr) += st->sampling_rate*(SB_SUBMODE_BITS+1)/st->full_frame_size; + break; + case SPEEX_SET_SAMPLING_RATE: + { + spx_int32_t tmp=(*(spx_int32_t*)ptr); + st->sampling_rate = tmp; + tmp>>=1; + speex_decoder_ctl(st->st_low, SPEEX_SET_SAMPLING_RATE, &tmp); + } + break; + case SPEEX_GET_SAMPLING_RATE: + (*(spx_int32_t*)ptr)=st->sampling_rate; + break; + case SPEEX_SET_HANDLER: + speex_decoder_ctl(st->st_low, SPEEX_SET_HANDLER, ptr); + break; + case SPEEX_SET_USER_HANDLER: + speex_decoder_ctl(st->st_low, SPEEX_SET_USER_HANDLER, ptr); + break; + case SPEEX_RESET_STATE: + { + int i; + for (i=0;i<2*st->lpcSize;i++) + st->mem_sp[i]=0; + for (i=0;ig0_mem[i]=st->g1_mem[i]=0; + st->last_ener=0; + } + break; + case SPEEX_SET_SUBMODE_ENCODING: + st->encode_submode = (*(spx_int32_t*)ptr); + speex_decoder_ctl(st->st_low, SPEEX_SET_SUBMODE_ENCODING, ptr); + break; + case SPEEX_GET_SUBMODE_ENCODING: + (*(spx_int32_t*)ptr) = st->encode_submode; + break; + case SPEEX_GET_LOOKAHEAD: + speex_decoder_ctl(st->st_low, SPEEX_GET_LOOKAHEAD, ptr); + (*(spx_int32_t*)ptr) = 2*(*(spx_int32_t*)ptr); + break; + case SPEEX_SET_HIGHPASS: + speex_decoder_ctl(st->st_low, SPEEX_SET_HIGHPASS, ptr); + break; + case SPEEX_GET_HIGHPASS: + speex_decoder_ctl(st->st_low, SPEEX_GET_HIGHPASS, ptr); + break; + case SPEEX_GET_ACTIVITY: + speex_decoder_ctl(st->st_low, SPEEX_GET_ACTIVITY, ptr); + break; + case SPEEX_GET_PI_GAIN: + { + int i; + spx_word32_t *g = (spx_word32_t*)ptr; + for (i=0;inbSubframes;i++) + g[i]=st->pi_gain[i]; + } + break; + case SPEEX_GET_EXC: + { + int i; + for (i=0;inbSubframes;i++) + ((spx_word16_t*)ptr)[i] = st->exc_rms[i]; + } + break; + case SPEEX_GET_DTX_STATUS: + speex_decoder_ctl(st->st_low, SPEEX_GET_DTX_STATUS, ptr); + break; + case SPEEX_SET_INNOVATION_SAVE: + st->innov_save = (spx_word16_t*)ptr; + break; + case SPEEX_SET_WIDEBAND: + speex_decoder_ctl(st->st_low, SPEEX_SET_WIDEBAND, ptr); + break; + case SPEEX_GET_STACK: + *((char**)ptr) = st->stack; + break; + default: + speex_warning_int("Unknown nb_ctl request: ", request); + return -1; + } + return 0; +} + + +static void sb_decode_lost(SBDecState *st, spx_word16_t *out, int dtx, char *stack) +{ + int i; + int saved_modeid=0; + + if (dtx) + { + saved_modeid=st->submodeID; + st->submodeID=1; + } else { + bw_lpc(QCONST16(0.99f,15), st->interp_qlpc, st->interp_qlpc, st->lpcSize); + } + + st->first=1; + + + /* Final signal synthesis from excitation */ + if (!dtx) + { + st->last_ener = MULT16_16_Q15(QCONST16(.9f,15),st->last_ener); + } + for (i=0;iframe_size;i++) + out[i+st->frame_size] = speex_rand(st->last_ener, &st->seed); + + iir_mem16(out+st->frame_size, st->interp_qlpc, out+st->frame_size, st->frame_size, st->lpcSize, + st->mem_sp, stack); + + + /* Reconstruct the original */ + qmf_synth(out, out+st->frame_size, h0, out, st->full_frame_size, QMF_ORDER, st->g0_mem, st->g1_mem, stack); + if (dtx) + { + st->submodeID=saved_modeid; + } + + return; +} + +int sb_decode(void *state, SpeexBits *bits, void *vout) +{ + int i, sub; + SBDecState *st; + int wideband; + int ret; + char *stack; + VARDECL(spx_word32_t *low_pi_gain); + VARDECL(spx_word16_t *low_exc_rms); + VARDECL(spx_coef_t *ak); + VARDECL(spx_lsp_t *qlsp); + VARDECL(spx_lsp_t *interp_qlsp); + spx_int32_t dtx; + const SpeexSBMode *mode; + spx_word16_t *out = (spx_word16_t*)vout; + spx_word16_t *low_innov_alias; spx_word32_t exc_ener_sum = 0; - + st = (SBDecState*)state; stack=st->stack; mode = (const SpeexSBMode*)(st->mode->mode); @@ -967,13 +1308,13 @@ ALLOC(qlsp, st->lpcSize, spx_lsp_t); ALLOC(interp_qlsp, st->lpcSize, spx_lsp_t); SUBMODE(lsp_unquant)(qlsp, st->lpcSize, bits); - + if (st->first) { for (i=0;ilpcSize;i++) st->old_qlsp[i] = qlsp[i]; } - + ALLOC(ak, st->lpcSize, spx_coef_t); for (sub=0;subnbSubframes;sub++) @@ -985,7 +1326,7 @@ spx_word16_t el=0; int offset; spx_word32_t rl=0,rh=0; - + offset = st->subframeSize*sub; sp=out+st->frame_size+offset; ALLOC(exc, st->subframeSize, spx_word32_t); @@ -995,18 +1336,16 @@ innov_save = st->innov_save+2*offset; SPEEX_MEMSET(innov_save, 0, 2*st->subframeSize); } - - /* LSP interpolation */ - lsp_interpolate(st->old_qlsp, qlsp, interp_qlsp, st->lpcSize, sub, st->nbSubframes); - lsp_enforce_margin(interp_qlsp, st->lpcSize, LSP_MARGIN); + /* LSP interpolation */ + lsp_interpolate(st->old_qlsp, qlsp, interp_qlsp, st->lpcSize, sub, st->nbSubframes, LSP_MARGIN); /* LSP to LPC */ lsp_to_lpc(interp_qlsp, ak, st->lpcSize, stack); /* Calculate reponse ratio between the low and high filter in the middle of the band (4000 Hz) */ - + st->pi_gain[sub]=LPC_SCALING; rh = LPC_SCALING; for (i=0;ilpcSize;i+=2) @@ -1021,7 +1360,7 @@ #else filter_ratio=(rl+.01)/(rh+.01); #endif - + SPEEX_MEMSET(exc, 0, st->subframeSize); if (!SUBMODE(innovation_unquant)) { @@ -1030,20 +1369,20 @@ quant = speex_bits_unpack_unsigned(bits, 5); g= spx_exp(MULT16_16(QCONST16(.125f,11),(quant-10))); - + g = PDIV32(g, filter_ratio); - + for (i=0;isubframeSize;i+=2) { exc[i]=SHL32(MULT16_32_P15(MULT16_16_Q15(mode->folding_gain,low_innov_alias[offset+i]),SHL32(g,6)),SIG_SHIFT); exc[i+1]=NEG32(SHL32(MULT16_32_P15(MULT16_16_Q15(mode->folding_gain,low_innov_alias[offset+i+1]),SHL32(g,6)),SIG_SHIFT)); } - + } else { spx_word16_t gc; spx_word32_t scale; int qgc = speex_bits_unpack_unsigned(bits, 4); - + el = low_exc_rms[sub]; gc = MULT16_16_Q15(QCONST16(0.87360,15),gc_quant_bound[qgc]); @@ -1051,7 +1390,7 @@ gc = MULT16_16_P14(QCONST16(1.4142f,14),gc); scale = SHL32(PDIV32(SHL32(MULT16_16(gc, el),3), filter_ratio),SIG_SHIFT-3); - SUBMODE(innovation_unquant)(exc, SUBMODE(innovation_params), st->subframeSize, + SUBMODE(innovation_unquant)(exc, SUBMODE(innovation_params), st->subframeSize, bits, stack, &st->seed); signal_mul(exc,exc,scale,st->subframeSize); @@ -1061,7 +1400,7 @@ VARDECL(spx_sig_t *innov2); ALLOC(innov2, st->subframeSize, spx_sig_t); SPEEX_MEMSET(innov2, 0, st->subframeSize); - SUBMODE(innovation_unquant)(innov2, SUBMODE(innovation_params), st->subframeSize, + SUBMODE(innovation_unquant)(innov2, SUBMODE(innovation_params), st->subframeSize, bits, stack, &st->seed); signal_mul(innov2, innov2, MULT16_32_P15(QCONST16(0.4f,15),scale), st->subframeSize); for (i=0;isubframeSize;i++) @@ -1070,14 +1409,14 @@ } } - + if (st->innov_save) { for (i=0;isubframeSize;i++) innov_save[2*i]=EXTRACT16(PSHR32(exc[i],SIG_SHIFT)); } - - iir_mem16(st->excBuf, st->interp_qlpc, sp, st->subframeSize, st->lpcSize, + + iir_mem16(st->excBuf, st->interp_qlpc, sp, st->subframeSize, st->lpcSize, st->mem_sp, stack); for (i=0;isubframeSize;i++) st->excBuf[i]=EXTRACT16(PSHR32(exc[i],SIG_SHIFT)); @@ -1087,7 +1426,7 @@ exc_ener_sum = ADD32(exc_ener_sum, DIV32(MULT16_16(st->exc_rms[sub],st->exc_rms[sub]), st->nbSubframes)); } st->last_ener = spx_sqrt(exc_ener_sum); - + qmf_synth(out, out+st->frame_size, h0, out, st->full_frame_size, QMF_ORDER, st->g0_mem, st->g1_mem, stack); for (i=0;ilpcSize;i++) st->old_qlsp[i] = qlsp[i]; @@ -1096,393 +1435,9 @@ return 0; } +#endif /* DISABLE_DECODER */ -int sb_encoder_ctl(void *state, int request, void *ptr) -{ - SBEncState *st; - st=(SBEncState*)state; - switch(request) - { - case SPEEX_GET_FRAME_SIZE: - (*(spx_int32_t*)ptr) = st->full_frame_size; - break; - case SPEEX_SET_HIGH_MODE: - st->submodeSelect = st->submodeID = (*(spx_int32_t*)ptr); - break; - case SPEEX_SET_LOW_MODE: - speex_encoder_ctl(st->st_low, SPEEX_SET_LOW_MODE, ptr); - break; - case SPEEX_SET_DTX: - speex_encoder_ctl(st->st_low, SPEEX_SET_DTX, ptr); - break; - case SPEEX_GET_DTX: - speex_encoder_ctl(st->st_low, SPEEX_GET_DTX, ptr); - break; - case SPEEX_GET_LOW_MODE: - speex_encoder_ctl(st->st_low, SPEEX_GET_LOW_MODE, ptr); - break; - case SPEEX_SET_MODE: - speex_encoder_ctl(st, SPEEX_SET_QUALITY, ptr); - break; -#ifndef DISABLE_VBR - case SPEEX_SET_VBR: - st->vbr_enabled = (*(spx_int32_t*)ptr); - speex_encoder_ctl(st->st_low, SPEEX_SET_VBR, ptr); - break; - case SPEEX_GET_VBR: - (*(spx_int32_t*)ptr) = st->vbr_enabled; - break; - case SPEEX_SET_VAD: - st->vad_enabled = (*(spx_int32_t*)ptr); - speex_encoder_ctl(st->st_low, SPEEX_SET_VAD, ptr); - break; - case SPEEX_GET_VAD: - (*(spx_int32_t*)ptr) = st->vad_enabled; - break; -#endif /* #ifndef DISABLE_VBR */ -#if !defined(DISABLE_VBR) && !defined(DISABLE_FLOAT_API) - case SPEEX_SET_VBR_QUALITY: - { - spx_int32_t q; - float qual = (*(float*)ptr)+.6; - st->vbr_quality = (*(float*)ptr); - if (qual>10) - qual=10; - q=(int)floor(.5+*(float*)ptr); - if (q>10) - q=10; - speex_encoder_ctl(st->st_low, SPEEX_SET_VBR_QUALITY, &qual); - speex_encoder_ctl(state, SPEEX_SET_QUALITY, &q); - break; - } - case SPEEX_GET_VBR_QUALITY: - (*(float*)ptr) = st->vbr_quality; - break; -#endif /* #if !defined(DISABLE_VBR) && !defined(DISABLE_FLOAT_API) */ -#ifndef DISABLE_VBR - case SPEEX_SET_ABR: - st->abr_enabled = (*(spx_int32_t*)ptr); - st->vbr_enabled = st->abr_enabled!=0; - speex_encoder_ctl(st->st_low, SPEEX_SET_VBR, &st->vbr_enabled); - if (st->vbr_enabled) - { - spx_int32_t i=10, rate, target; - float vbr_qual; - target = (*(spx_int32_t*)ptr); - while (i>=0) - { - speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i); - speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate); - if (rate <= target) - break; - i--; - } - vbr_qual=i; - if (vbr_qual<0) - vbr_qual=0; - speex_encoder_ctl(st, SPEEX_SET_VBR_QUALITY, &vbr_qual); - st->abr_count=0; - st->abr_drift=0; - st->abr_drift2=0; - } - - break; - case SPEEX_GET_ABR: - (*(spx_int32_t*)ptr) = st->abr_enabled; - break; -#endif /* #ifndef DISABLE_VBR */ - - case SPEEX_SET_QUALITY: - { - spx_int32_t nb_qual; - int quality = (*(spx_int32_t*)ptr); - if (quality < 0) - quality = 0; - if (quality > 10) - quality = 10; - st->submodeSelect = st->submodeID = ((const SpeexSBMode*)(st->mode->mode))->quality_map[quality]; - nb_qual = ((const SpeexSBMode*)(st->mode->mode))->low_quality_map[quality]; - speex_encoder_ctl(st->st_low, SPEEX_SET_MODE, &nb_qual); - } - break; - case SPEEX_SET_COMPLEXITY: - speex_encoder_ctl(st->st_low, SPEEX_SET_COMPLEXITY, ptr); - st->complexity = (*(spx_int32_t*)ptr); - if (st->complexity<1) - st->complexity=1; - break; - case SPEEX_GET_COMPLEXITY: - (*(spx_int32_t*)ptr) = st->complexity; - break; - case SPEEX_SET_BITRATE: - { - spx_int32_t i=10; - spx_int32_t rate, target; - target = (*(spx_int32_t*)ptr); - while (i>=0) - { - speex_encoder_ctl(st, SPEEX_SET_QUALITY, &i); - speex_encoder_ctl(st, SPEEX_GET_BITRATE, &rate); - if (rate <= target) - break; - i--; - } - } - break; - case SPEEX_GET_BITRATE: - speex_encoder_ctl(st->st_low, request, ptr); - /*fprintf (stderr, "before: %d\n", (*(int*)ptr));*/ - if (st->submodes[st->submodeID]) - (*(spx_int32_t*)ptr) += st->sampling_rate*SUBMODE(bits_per_frame)/st->full_frame_size; - else - (*(spx_int32_t*)ptr) += st->sampling_rate*(SB_SUBMODE_BITS+1)/st->full_frame_size; - /*fprintf (stderr, "after: %d\n", (*(int*)ptr));*/ - break; - case SPEEX_SET_SAMPLING_RATE: - { - spx_int32_t tmp=(*(spx_int32_t*)ptr); - st->sampling_rate = tmp; - tmp>>=1; - speex_encoder_ctl(st->st_low, SPEEX_SET_SAMPLING_RATE, &tmp); - } - break; - case SPEEX_GET_SAMPLING_RATE: - (*(spx_int32_t*)ptr)=st->sampling_rate; - break; - case SPEEX_RESET_STATE: - { - int i; - st->first = 1; - for (i=0;ilpcSize;i++) - st->old_lsp[i]= DIV32(MULT16_16(QCONST16(3.1415927f, LSP_SHIFT), i+1), st->lpcSize+1); - for (i=0;ilpcSize;i++) - st->mem_sw[i]=st->mem_sp[i]=st->mem_sp2[i]=0; - for (i=0;ih0_mem[i]=st->h1_mem[i]=0; - } - break; - case SPEEX_SET_SUBMODE_ENCODING: - st->encode_submode = (*(spx_int32_t*)ptr); - speex_encoder_ctl(st->st_low, SPEEX_SET_SUBMODE_ENCODING, ptr); - break; - case SPEEX_GET_SUBMODE_ENCODING: - (*(spx_int32_t*)ptr) = st->encode_submode; - break; - case SPEEX_GET_LOOKAHEAD: - speex_encoder_ctl(st->st_low, SPEEX_GET_LOOKAHEAD, ptr); - (*(spx_int32_t*)ptr) = 2*(*(spx_int32_t*)ptr) + QMF_ORDER - 1; - break; - case SPEEX_SET_PLC_TUNING: - speex_encoder_ctl(st->st_low, SPEEX_SET_PLC_TUNING, ptr); - break; - case SPEEX_GET_PLC_TUNING: - speex_encoder_ctl(st->st_low, SPEEX_GET_PLC_TUNING, ptr); - break; -#ifndef DISABLE_VBR - case SPEEX_SET_VBR_MAX_BITRATE: - { - st->vbr_max = (*(spx_int32_t*)ptr); - if (SPEEX_SET_VBR_MAX_BITRATE<1) - { - speex_encoder_ctl(st->st_low, SPEEX_SET_VBR_MAX_BITRATE, &st->vbr_max); - st->vbr_max_high = 17600; - } else { - spx_int32_t low_rate; - if (st->vbr_max >= 42200) - { - st->vbr_max_high = 17600; - } else if (st->vbr_max >= 27800) - { - st->vbr_max_high = 9600; - } else if (st->vbr_max > 20600) - { - st->vbr_max_high = 5600; - } else { - st->vbr_max_high = 1800; - } - if (st->subframeSize==80) - st->vbr_max_high = 1800; - low_rate = st->vbr_max - st->vbr_max_high; - speex_encoder_ctl(st->st_low, SPEEX_SET_VBR_MAX_BITRATE, &low_rate); - } - } - break; - case SPEEX_GET_VBR_MAX_BITRATE: - (*(spx_int32_t*)ptr) = st->vbr_max; - break; -#endif /* #ifndef DISABLE_VBR */ - case SPEEX_SET_HIGHPASS: - speex_encoder_ctl(st->st_low, SPEEX_SET_HIGHPASS, ptr); - break; - case SPEEX_GET_HIGHPASS: - speex_encoder_ctl(st->st_low, SPEEX_GET_HIGHPASS, ptr); - break; - - - /* This is all internal stuff past this point */ - case SPEEX_GET_PI_GAIN: - { - int i; - spx_word32_t *g = (spx_word32_t*)ptr; - for (i=0;inbSubframes;i++) - g[i]=st->pi_gain[i]; - } - break; - case SPEEX_GET_EXC: - { - int i; - for (i=0;inbSubframes;i++) - ((spx_word16_t*)ptr)[i] = st->exc_rms[i]; - } - break; -#ifndef DISABLE_VBR - case SPEEX_GET_RELATIVE_QUALITY: - (*(float*)ptr)=st->relative_quality; - break; -#endif /* #ifndef DISABLE_VBR */ - case SPEEX_SET_INNOVATION_SAVE: - st->innov_rms_save = (spx_word16_t*)ptr; - break; - case SPEEX_SET_WIDEBAND: - speex_encoder_ctl(st->st_low, SPEEX_SET_WIDEBAND, ptr); - break; - case SPEEX_GET_STACK: - *((char**)ptr) = st->stack; - break; - default: - speex_warning_int("Unknown nb_ctl request: ", request); - return -1; - } - return 0; -} - -int sb_decoder_ctl(void *state, int request, void *ptr) -{ - SBDecState *st; - st=(SBDecState*)state; - switch(request) - { - case SPEEX_SET_HIGH_MODE: - st->submodeID = (*(spx_int32_t*)ptr); - break; - case SPEEX_SET_LOW_MODE: - speex_decoder_ctl(st->st_low, SPEEX_SET_LOW_MODE, ptr); - break; - case SPEEX_GET_LOW_MODE: - speex_decoder_ctl(st->st_low, SPEEX_GET_LOW_MODE, ptr); - break; - case SPEEX_GET_FRAME_SIZE: - (*(spx_int32_t*)ptr) = st->full_frame_size; - break; - case SPEEX_SET_ENH: - speex_decoder_ctl(st->st_low, request, ptr); - st->lpc_enh_enabled = *((spx_int32_t*)ptr); - break; - case SPEEX_GET_ENH: - *((spx_int32_t*)ptr) = st->lpc_enh_enabled; - break; - case SPEEX_SET_MODE: - case SPEEX_SET_QUALITY: - { - spx_int32_t nb_qual; - int quality = (*(spx_int32_t*)ptr); - if (quality < 0) - quality = 0; - if (quality > 10) - quality = 10; - st->submodeID = ((const SpeexSBMode*)(st->mode->mode))->quality_map[quality]; - nb_qual = ((const SpeexSBMode*)(st->mode->mode))->low_quality_map[quality]; - speex_decoder_ctl(st->st_low, SPEEX_SET_MODE, &nb_qual); - } - break; - case SPEEX_GET_BITRATE: - speex_decoder_ctl(st->st_low, request, ptr); - if (st->submodes[st->submodeID]) - (*(spx_int32_t*)ptr) += st->sampling_rate*SUBMODE(bits_per_frame)/st->full_frame_size; - else - (*(spx_int32_t*)ptr) += st->sampling_rate*(SB_SUBMODE_BITS+1)/st->full_frame_size; - break; - case SPEEX_SET_SAMPLING_RATE: - { - spx_int32_t tmp=(*(spx_int32_t*)ptr); - st->sampling_rate = tmp; - tmp>>=1; - speex_decoder_ctl(st->st_low, SPEEX_SET_SAMPLING_RATE, &tmp); - } - break; - case SPEEX_GET_SAMPLING_RATE: - (*(spx_int32_t*)ptr)=st->sampling_rate; - break; - case SPEEX_SET_HANDLER: - speex_decoder_ctl(st->st_low, SPEEX_SET_HANDLER, ptr); - break; - case SPEEX_SET_USER_HANDLER: - speex_decoder_ctl(st->st_low, SPEEX_SET_USER_HANDLER, ptr); - break; - case SPEEX_RESET_STATE: - { - int i; - for (i=0;i<2*st->lpcSize;i++) - st->mem_sp[i]=0; - for (i=0;ig0_mem[i]=st->g1_mem[i]=0; - st->last_ener=0; - } - break; - case SPEEX_SET_SUBMODE_ENCODING: - st->encode_submode = (*(spx_int32_t*)ptr); - speex_decoder_ctl(st->st_low, SPEEX_SET_SUBMODE_ENCODING, ptr); - break; - case SPEEX_GET_SUBMODE_ENCODING: - (*(spx_int32_t*)ptr) = st->encode_submode; - break; - case SPEEX_GET_LOOKAHEAD: - speex_decoder_ctl(st->st_low, SPEEX_GET_LOOKAHEAD, ptr); - (*(spx_int32_t*)ptr) = 2*(*(spx_int32_t*)ptr); - break; - case SPEEX_SET_HIGHPASS: - speex_decoder_ctl(st->st_low, SPEEX_SET_HIGHPASS, ptr); - break; - case SPEEX_GET_HIGHPASS: - speex_decoder_ctl(st->st_low, SPEEX_GET_HIGHPASS, ptr); - break; - case SPEEX_GET_ACTIVITY: - speex_decoder_ctl(st->st_low, SPEEX_GET_ACTIVITY, ptr); - break; - case SPEEX_GET_PI_GAIN: - { - int i; - spx_word32_t *g = (spx_word32_t*)ptr; - for (i=0;inbSubframes;i++) - g[i]=st->pi_gain[i]; - } - break; - case SPEEX_GET_EXC: - { - int i; - for (i=0;inbSubframes;i++) - ((spx_word16_t*)ptr)[i] = st->exc_rms[i]; - } - break; - case SPEEX_GET_DTX_STATUS: - speex_decoder_ctl(st->st_low, SPEEX_GET_DTX_STATUS, ptr); - break; - case SPEEX_SET_INNOVATION_SAVE: - st->innov_save = (spx_word16_t*)ptr; - break; - case SPEEX_SET_WIDEBAND: - speex_decoder_ctl(st->st_low, SPEEX_SET_WIDEBAND, ptr); - break; - case SPEEX_GET_STACK: - *((char**)ptr) = st->stack; - break; - default: - speex_warning_int("Unknown nb_ctl request: ", request); - return -1; - } - return 0; -} #endif diff -Nru speex-1.2~rc1.2/libspeex/sb_celp.h speex-1.2.0/libspeex/sb_celp.h --- speex-1.2~rc1.2/libspeex/sb_celp.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/sb_celp.h 2015-07-06 15:01:58.000000000 +0000 @@ -37,7 +37,6 @@ #define SB_CELP_H #include "modes.h" -#include #include "nb_celp.h" /**Structure representing the full state of the sub-band encoder*/ @@ -57,7 +56,7 @@ char *stack; /**< Temporary allocation stack */ spx_word16_t *high; /**< High-band signal (buffer) */ - spx_word16_t *h0_mem, *h1_mem; + spx_word16_t *h0_mem; const spx_word16_t *window; /**< LPC analysis window */ const spx_word16_t *lagWindow; /**< Auto-correlation window */ diff -Nru speex-1.2~rc1.2/libspeex/scal.c speex-1.2.0/libspeex/scal.c --- speex-1.2~rc1.2/libspeex/scal.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/scal.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,289 +0,0 @@ -/* Copyright (C) 2006-2008 CSIRO, Jean-Marc Valin, Xiph.Org Foundation - - File: scal.c - Shaped comb-allpass filter for channel decorrelation - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are - met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -/* -The algorithm implemented here is described in: - -* J.-M. Valin, Perceptually-Motivated Nonlinear Channel Decorrelation For - Stereo Acoustic Echo Cancellation, Accepted for Joint Workshop on - Hands­free Speech Communication and Microphone Arrays (HSCMA), 2008. - http://people.xiph.org/~jm/papers/valin_hscma2008.pdf - -*/ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "speex/speex_echo.h" -#include "vorbis_psy.h" -#include "arch.h" -#include "os_support.h" -#include "smallft.h" -#include -#include - -#define ALLPASS_ORDER 20 - -struct SpeexDecorrState_ { - int rate; - int channels; - int frame_size; -#ifdef VORBIS_PSYCHO - VorbisPsy *psy; - struct drft_lookup lookup; - float *wola_mem; - float *curve; -#endif - float *vorbis_win; - int seed; - float *y; - - /* Per-channel stuff */ - float *buff; - float (*ring)[ALLPASS_ORDER]; - int *ringID; - int *order; - float *alpha; -}; - - - -EXPORT SpeexDecorrState *speex_decorrelate_new(int rate, int channels, int frame_size) -{ - int i, ch; - SpeexDecorrState *st = speex_alloc(sizeof(SpeexDecorrState)); - st->rate = rate; - st->channels = channels; - st->frame_size = frame_size; -#ifdef VORBIS_PSYCHO - st->psy = vorbis_psy_init(rate, 2*frame_size); - spx_drft_init(&st->lookup, 2*frame_size); - st->wola_mem = speex_alloc(frame_size*sizeof(float)); - st->curve = speex_alloc(frame_size*sizeof(float)); -#endif - st->y = speex_alloc(frame_size*sizeof(float)); - - st->buff = speex_alloc(channels*2*frame_size*sizeof(float)); - st->ringID = speex_alloc(channels*sizeof(int)); - st->order = speex_alloc(channels*sizeof(int)); - st->alpha = speex_alloc(channels*sizeof(float)); - st->ring = speex_alloc(channels*ALLPASS_ORDER*sizeof(float)); - - /*FIXME: The +20 is there only as a kludge for ALL_PASS_OLA*/ - st->vorbis_win = speex_alloc((2*frame_size+20)*sizeof(float)); - for (i=0;i<2*frame_size;i++) - st->vorbis_win[i] = sin(.5*M_PI* sin(M_PI*i/(2*frame_size))*sin(M_PI*i/(2*frame_size)) ); - st->seed = rand(); - - for (ch=0;chring[ch][i] = 0; - st->ringID[ch] = 0; - st->alpha[ch] = 0; - st->order[ch] = 10; - } - return st; -} - -static float uni_rand(int *seed) -{ - const unsigned int jflone = 0x3f800000; - const unsigned int jflmsk = 0x007fffff; - union {int i; float f;} ran; - *seed = 1664525 * *seed + 1013904223; - ran.i = jflone | (jflmsk & *seed); - ran.f -= 1.5; - return 2*ran.f; -} - -static unsigned int irand(int *seed) -{ - *seed = 1664525 * *seed + 1013904223; - return ((unsigned int)*seed)>>16; -} - - -EXPORT void speex_decorrelate(SpeexDecorrState *st, const spx_int16_t *in, spx_int16_t *out, int strength) -{ - int ch; - float amount; - - if (strength<0) - strength = 0; - if (strength>100) - strength = 100; - - amount = .01*strength; - for (ch=0;chchannels;ch++) - { - int i; - int N=2*st->frame_size; - float beta, beta2; - float *x; - float max_alpha = 0; - - float *buff; - float *ring; - int ringID; - int order; - float alpha; - - buff = st->buff+ch*2*st->frame_size; - ring = st->ring[ch]; - ringID = st->ringID[ch]; - order = st->order[ch]; - alpha = st->alpha[ch]; - - for (i=0;iframe_size;i++) - buff[i] = buff[i+st->frame_size]; - for (i=0;iframe_size;i++) - buff[i+st->frame_size] = in[i*st->channels+ch]; - - x = buff+st->frame_size; - beta = 1.-.3*amount*amount; - if (amount>1) - beta = 1-sqrt(.4*amount); - else - beta = 1-0.63246*amount; - if (beta<0) - beta = 0; - - beta2 = beta; - for (i=0;iframe_size;i++) - { - st->y[i] = alpha*(x[i-ALLPASS_ORDER+order]-beta*x[i-ALLPASS_ORDER+order-1])*st->vorbis_win[st->frame_size+i+order] - + x[i-ALLPASS_ORDER]*st->vorbis_win[st->frame_size+i] - - alpha*(ring[ringID] - - beta*ring[ringID+1>=order?0:ringID+1]); - ring[ringID++]=st->y[i]; - st->y[i] *= st->vorbis_win[st->frame_size+i]; - if (ringID>=order) - ringID=0; - } - order = order+(irand(&st->seed)%3)-1; - if (order < 5) - order = 5; - if (order > 10) - order = 10; - /*order = 5+(irand(&st->seed)%6);*/ - max_alpha = pow(.96+.04*(amount-1),order); - if (max_alpha > .98/(1.+beta2)) - max_alpha = .98/(1.+beta2); - - alpha = alpha + .4*uni_rand(&st->seed); - if (alpha > max_alpha) - alpha = max_alpha; - if (alpha < -max_alpha) - alpha = -max_alpha; - for (i=0;iframe_size;i++) - { - float tmp = alpha*(x[i-ALLPASS_ORDER+order]-beta*x[i-ALLPASS_ORDER+order-1])*st->vorbis_win[i+order] - + x[i-ALLPASS_ORDER]*st->vorbis_win[i] - - alpha*(ring[ringID] - - beta*ring[ringID+1>=order?0:ringID+1]); - ring[ringID++]=tmp; - tmp *= st->vorbis_win[i]; - if (ringID>=order) - ringID=0; - st->y[i] += tmp; - } - -#ifdef VORBIS_PSYCHO - float frame[N]; - float scale = 1./N; - for (i=0;i<2*st->frame_size;i++) - frame[i] = buff[i]; - //float coef = .5*0.78130; - float coef = M_PI*0.075063 * 0.93763 * amount * .8 * 0.707; - compute_curve(st->psy, buff, st->curve); - for (i=1;iframe_size;i++) - { - float x1,x2; - float gain; - do { - x1 = uni_rand(&st->seed); - x2 = uni_rand(&st->seed); - } while (x1*x1+x2*x2 > 1.); - gain = coef*sqrt(.1+st->curve[i]); - frame[2*i-1] = gain*x1; - frame[2*i] = gain*x2; - } - frame[0] = coef*uni_rand(&st->seed)*sqrt(.1+st->curve[0]); - frame[2*st->frame_size-1] = coef*uni_rand(&st->seed)*sqrt(.1+st->curve[st->frame_size-1]); - spx_drft_backward(&st->lookup,frame); - for (i=0;i<2*st->frame_size;i++) - frame[i] *= st->vorbis_win[i]; -#endif - - for (i=0;iframe_size;i++) - { -#ifdef VORBIS_PSYCHO - float tmp = st->y[i] + frame[i] + st->wola_mem[i]; - st->wola_mem[i] = frame[i+st->frame_size]; -#else - float tmp = st->y[i]; -#endif - if (tmp>32767) - tmp = 32767; - if (tmp < -32767) - tmp = -32767; - out[i*st->channels+ch] = tmp; - } - - st->ringID[ch] = ringID; - st->order[ch] = order; - st->alpha[ch] = alpha; - - } -} - -EXPORT void speex_decorrelate_destroy(SpeexDecorrState *st) -{ -#ifdef VORBIS_PSYCHO - vorbis_psy_destroy(st->psy); - speex_free(st->wola_mem); - speex_free(st->curve); -#endif - speex_free(st->buff); - speex_free(st->ring); - speex_free(st->ringID); - speex_free(st->alpha); - speex_free(st->vorbis_win); - speex_free(st->order); - speex_free(st->y); - speex_free(st); -} diff -Nru speex-1.2~rc1.2/libspeex/smallft.c speex-1.2.0/libspeex/smallft.c --- speex-1.2~rc1.2/libspeex/smallft.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/smallft.c 2015-07-06 15:01:59.000000000 +0000 @@ -127,7 +127,7 @@ t1+=ido; t2+=ido; } - + if(ido<2)return; if(ido==2)goto L105; @@ -174,7 +174,7 @@ int i,k,t0,t1,t2,t3,t4,t5,t6; float ci2,ci3,ci4,cr2,cr3,cr4,ti1,ti2,ti3,ti4,tr1,tr2,tr3,tr4; t0=l1*ido; - + t1=t0; t4=t1<<1; t2=t1+(t1<<1); @@ -246,7 +246,7 @@ if(ido&1)return; L105: - + t2=(t1=t0+ido-1)+(t0<<1); t3=ido<<2; t4=ido; @@ -280,7 +280,7 @@ int nbd; float dcp,arg,dsp,ar1h,ar2h; int idp2,ipp2; - + arg=tpi/(float)ip; dcp=cos(arg); dsp=sin(arg); @@ -638,7 +638,7 @@ float ti2,tr2; t0=l1*ido; - + t1=0; t2=0; t3=(ido<<1)-1; @@ -754,7 +754,7 @@ int i,k,t0,t1,t2,t3,t4,t5,t6,t7,t8; float ci2,ci3,ci4,cr2,cr3,cr4,ti1,ti2,ti3,ti4,tr1,tr2,tr3,tr4; t0=l1*ido; - + t1=0; t2=ido<<2; t3=0; @@ -763,7 +763,7 @@ t4=t3+t6; t5=t1; tr3=cc[t4-1]+cc[t4-1]; - tr4=cc[t4]+cc[t4]; + tr4=cc[t4]+cc[t4]; tr1=cc[t3]-cc[(t4+=t6)-1]; tr2=cc[t3]+cc[t4-1]; ch[t5]=tr2+tr3; @@ -858,7 +858,7 @@ ipp2=ip; ipph=(ip+1)>>1; if(idodec(state, bits, float_out); - for (i=0;i32767.f) - out[i] = 32767; - else if (float_out[i]<-32768.f) - out[i] = -32768; - else - out[i] = (spx_int16_t)floor(.5+float_out[i]); + for (i=0;i32767.f) + out[i] = 32767; + else if (float_out[i]<-32768.f) + out[i] = -32768; + else + out[i] = (spx_int16_t)floor(.5+float_out[i]); + } } return ret; } @@ -192,7 +195,7 @@ int nb_mode_query(const void *mode, int request, void *ptr) { const SpeexNBMode *m = (const SpeexNBMode*)mode; - + switch (request) { case SPEEX_MODE_FRAME_SIZE: diff -Nru speex-1.2~rc1.2/libspeex/speex_callbacks.c speex-1.2.0/libspeex/speex_callbacks.c --- speex-1.2~rc1.2/libspeex/speex_callbacks.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/speex_callbacks.c 2015-07-06 15:01:58.000000000 +0000 @@ -6,18 +6,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -36,7 +36,7 @@ #include "config.h" #endif -#include +#include "speex/speex_callbacks.h" #include "arch.h" #include "os_support.h" @@ -65,7 +65,7 @@ adv = 16; else if (id<14) adv = 32; - else + else adv = 64; speex_bits_advance(bits, adv); } diff -Nru speex-1.2~rc1.2/libspeex/speex_header.c speex-1.2.0/libspeex/speex_header.c --- speex-1.2~rc1.2/libspeex/speex_header.c 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/libspeex/speex_header.c 2015-07-06 15:01:59.000000000 +0000 @@ -1,22 +1,22 @@ -/* Copyright (C) 2002 Jean-Marc Valin +/* Copyright (C) 2002 Jean-Marc Valin File: speex_header.c Describes the Speex header Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -36,8 +36,8 @@ #endif #include "arch.h" -#include -#include +#include "speex/speex_header.h" +#include "speex/speex.h" #include "os_support.h" #ifndef NULL @@ -98,10 +98,10 @@ header->speex_version[i]=SPEEX_VERSION[i]; for (;ispeex_version[i]=0; - + header->speex_version_id = 1; header->header_size = sizeof(SpeexHeader); - + header->rate = rate; header->mode = m->modeID; header->mode_bitstream_version = m->bitstream_version; @@ -111,7 +111,7 @@ header->bitrate = -1; speex_mode_query(m, SPEEX_MODE_FRAME_SIZE, &header->frame_size); header->vbr = 0; - + header->frames_per_packet = 0; header->extra_headers = 0; header->reserved1 = 0; @@ -122,9 +122,9 @@ { SpeexHeader *le_header; le_header = (SpeexHeader*)speex_alloc(sizeof(SpeexHeader)); - + SPEEX_COPY(le_header, header, 1); - + /*Make sure everything is now little-endian*/ ENDIAN_SWITCH(le_header->speex_version_id); ENDIAN_SWITCH(le_header->header_size); @@ -155,17 +155,18 @@ return NULL; } + for (i=0;i<8;i++) if (packet[i]!=h[i]) { - speex_notify("This doesn't look like a Speex file"); + /* This doesn't look like a Speex file */ return NULL; } le_header = (SpeexHeader*)speex_alloc(sizeof(SpeexHeader)); - + SPEEX_COPY(le_header, (SpeexHeader*)packet, 1); - + /*Make sure everything is converted correctly from little-endian*/ ENDIAN_SWITCH(le_header->speex_version_id); ENDIAN_SWITCH(le_header->header_size); diff -Nru speex-1.2~rc1.2/libspeex/stereo.c speex-1.2.0/libspeex/stereo.c --- speex-1.2~rc1.2/libspeex/stereo.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/stereo.c 2015-07-06 15:02:01.000000000 +0000 @@ -1,21 +1,21 @@ -/* Copyright (C) 2002 Jean-Marc Valin +/* Copyright (C) 2002 Jean-Marc Valin File: stereo.c Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -33,8 +33,8 @@ #include "config.h" #endif -#include -#include +#include "speex/speex_stereo.h" +#include "speex/speex_callbacks.h" #include "math_approx.h" #include "vq.h" #include @@ -69,7 +69,7 @@ #ifdef FIXED_POINT #define COMPATIBILITY_HACK(s) do {if ((s)->reserved1 != 0xdeadbeef) speex_stereo_state_reset((SpeexStereoState*)s); } while (0); #else -#define COMPATIBILITY_HACK(s) +#define COMPATIBILITY_HACK(s) #endif EXPORT SpeexStereoState *speex_stereo_state_init() @@ -96,7 +96,7 @@ stereo->smooth_right = 1.f; stereo->reserved1 = 0; stereo->reserved2 = 0; -#endif +#endif } EXPORT void speex_stereo_state_destroy(SpeexStereoState *stereo) @@ -104,6 +104,7 @@ speex_free(stereo); } +#ifndef DISABLE_ENCODER #ifndef DISABLE_FLOAT_API EXPORT void speex_encode_stereo(float *data, int frame_size, SpeexBits *bits) { @@ -123,7 +124,7 @@ /*Quantization*/ speex_bits_pack(bits, 14, 5); speex_bits_pack(bits, SPEEX_INBAND_STEREO, 4); - + balance=4*log(balance); /*Pack sign*/ @@ -134,9 +135,9 @@ balance=floor(.5+fabs(balance)); if (balance>30) balance=31; - + speex_bits_pack(bits, (int)balance, 5); - + /* FIXME: this is a hack */ tmp=scal_quant(e_ratio*Q15_ONE, e_ratio_quant_bounds, 4); speex_bits_pack(bits, tmp, 2); @@ -153,7 +154,7 @@ #ifdef FIXED_POINT int shift; #endif - + /* In band marker */ speex_bits_pack(bits, 14, 5); /* Stereo marker */ @@ -198,9 +199,9 @@ if (balance_id>30) balance_id=31; #endif - + speex_bits_pack(bits, balance_id, 5); - + /* "coherence" quantisation */ #ifdef FIXED_POINT shift = spx_ilog2(e_tot); @@ -211,11 +212,17 @@ #else e_ratio = e_tot/(1.+e_left+e_right); #endif - + tmp=scal_quant(EXTRACT16(e_ratio), e_ratio_quant_bounds, 4); /*fprintf (stderr, "%d %d %d %d\n", largest, smallest, balance_id, e_ratio);*/ speex_bits_pack(bits, tmp, 2); } +#else /* DISABLE_ENCODER */ +EXPORT void speex_encode_stereo_int(spx_int16_t *data, int frame_size, SpeexBits *bits) +{ +} +#endif /* DISABLE_ENCODER */ + #ifndef DISABLE_FLOAT_API EXPORT void speex_decode_stereo(float *data, int frame_size, SpeexStereoState *_stereo) @@ -224,12 +231,12 @@ spx_word32_t balance; spx_word16_t e_left, e_right, e_ratio; RealSpeexStereoState *stereo = (RealSpeexStereoState*)_stereo; - + COMPATIBILITY_HACK(stereo); - + balance=stereo->balance; e_ratio=stereo->e_ratio; - + /* These two are Q14, with max value just below 2. */ e_right = DIV32(QCONST32(1., 22), spx_sqrt(MULT16_32_Q15(e_ratio, ADD32(QCONST32(1., 16), balance)))); e_left = SHR32(MULT16_16(spx_sqrt(balance), e_right), 8); @@ -253,10 +260,10 @@ RealSpeexStereoState *stereo = (RealSpeexStereoState*)_stereo; COMPATIBILITY_HACK(stereo); - + balance=stereo->balance; e_ratio=stereo->e_ratio; - + /* These two are Q14, with max value just below 2. */ e_right = DIV32(QCONST32(1., 22), spx_sqrt(MULT16_32_Q15(e_ratio, ADD32(QCONST32(1., 16), balance)))); e_left = SHR32(MULT16_16(spx_sqrt(balance), e_right), 8); @@ -278,7 +285,7 @@ int tmp; stereo = (RealSpeexStereoState*)data; - + COMPATIBILITY_HACK(stereo); if (speex_bits_unpack_unsigned(bits, 1)) diff -Nru speex-1.2~rc1.2/libspeex/testdenoise.c speex-1.2.0/libspeex/testdenoise.c --- speex-1.2~rc1.2/libspeex/testdenoise.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/testdenoise.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,44 +0,0 @@ -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include -#include - -#define NN 160 - -int main() -{ - short in[NN]; - int i; - SpeexPreprocessState *st; - int count=0; - float f; - - st = speex_preprocess_state_init(NN, 8000); - i=1; - speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_DENOISE, &i); - i=0; - speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_AGC, &i); - i=8000; - speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_AGC_LEVEL, &i); - i=0; - speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_DEREVERB, &i); - f=.0; - speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_DEREVERB_DECAY, &f); - f=.0; - speex_preprocess_ctl(st, SPEEX_PREPROCESS_SET_DEREVERB_LEVEL, &f); - while (1) - { - int vad; - fread(in, sizeof(short), NN, stdin); - if (feof(stdin)) - break; - vad = speex_preprocess_run(st, in); - /*fprintf (stderr, "%d\n", vad);*/ - fwrite(in, sizeof(short), NN, stdout); - count++; - } - speex_preprocess_state_destroy(st); - return 0; -} diff -Nru speex-1.2~rc1.2/libspeex/testecho.c speex-1.2.0/libspeex/testecho.c --- speex-1.2~rc1.2/libspeex/testecho.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/testecho.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,53 +0,0 @@ -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include -#include -#include -#include -#include -#include "speex/speex_echo.h" -#include "speex/speex_preprocess.h" - - -#define NN 128 -#define TAIL 1024 - -int main(int argc, char **argv) -{ - FILE *echo_fd, *ref_fd, *e_fd; - short echo_buf[NN], ref_buf[NN], e_buf[NN]; - SpeexEchoState *st; - SpeexPreprocessState *den; - int sampleRate = 8000; - - if (argc != 4) - { - fprintf(stderr, "testecho mic_signal.sw speaker_signal.sw output.sw\n"); - exit(1); - } - echo_fd = fopen(argv[2], "rb"); - ref_fd = fopen(argv[1], "rb"); - e_fd = fopen(argv[3], "wb"); - - st = speex_echo_state_init(NN, TAIL); - den = speex_preprocess_state_init(NN, sampleRate); - speex_echo_ctl(st, SPEEX_ECHO_SET_SAMPLING_RATE, &sampleRate); - speex_preprocess_ctl(den, SPEEX_PREPROCESS_SET_ECHO_STATE, st); - - while (!feof(ref_fd) && !feof(echo_fd)) - { - fread(ref_buf, sizeof(short), NN, ref_fd); - fread(echo_buf, sizeof(short), NN, echo_fd); - speex_echo_cancellation(st, ref_buf, echo_buf, e_buf); - speex_preprocess_run(den, e_buf); - fwrite(e_buf, sizeof(short), NN, e_fd); - } - speex_echo_state_destroy(st); - speex_preprocess_state_destroy(den); - fclose(e_fd); - fclose(echo_fd); - fclose(ref_fd); - return 0; -} diff -Nru speex-1.2~rc1.2/libspeex/testenc.c speex-1.2.0/libspeex/testenc.c --- speex-1.2~rc1.2/libspeex/testenc.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/testenc.c 2016-02-11 17:27:21.000000000 +0000 @@ -2,10 +2,9 @@ #include "config.h" #endif -#include +#include "speex/speex_callbacks.h" #include #include -#include #ifdef FIXED_DEBUG extern long long spx_mips; @@ -115,7 +114,7 @@ rewind(fin); rewind(fout); - while ( FRAME_SIZE == fread(in_short, sizeof(short), FRAME_SIZE, fin) + while ( FRAME_SIZE == fread(in_short, sizeof(short), FRAME_SIZE, fin) && FRAME_SIZE == fread(out_short, sizeof(short), FRAME_SIZE,fout) ) { diff -Nru speex-1.2~rc1.2/libspeex/testenc_uwb.c speex-1.2.0/libspeex/testenc_uwb.c --- speex-1.2~rc1.2/libspeex/testenc_uwb.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/testenc_uwb.c 2015-07-23 18:05:56.000000000 +0000 @@ -2,10 +2,9 @@ #include "config.h" #endif -#include +#include "speex/speex_callbacks.h" #include #include -#include #ifdef FIXED_DEBUG extern long long spx_mips; @@ -19,7 +18,6 @@ FILE *fin, *fout, *fbits=NULL; short in_short[FRAME_SIZE]; short out_short[FRAME_SIZE]; - float in_float[FRAME_SIZE]; float sigpow,errpow,snr, seg_snr=0; int snr_frames = 0; char cbits[200]; @@ -83,8 +81,6 @@ fread(in_short, sizeof(short), FRAME_SIZE, fin); if (feof(fin)) break; - for (i=0;i +#include "speex/speex_callbacks.h" #include #include -#include #ifdef FIXED_DEBUG extern long long spx_mips; @@ -111,7 +110,7 @@ rewind(fin); rewind(fout); - while ( FRAME_SIZE == fread(in_short, sizeof(short), FRAME_SIZE, fin) + while ( FRAME_SIZE == fread(in_short, sizeof(short), FRAME_SIZE, fin) && FRAME_SIZE == fread(out_short, sizeof(short), FRAME_SIZE,fout) ) { @@ -135,6 +134,6 @@ #ifdef FIXED_DEBUG printf ("Total: %f MIPS\n", (float)(1e-6*50*spx_mips/snr_frames)); #endif - + return 1; } diff -Nru speex-1.2~rc1.2/libspeex/testjitter.c speex-1.2.0/libspeex/testjitter.c --- speex-1.2~rc1.2/libspeex/testjitter.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/testjitter.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,75 +0,0 @@ -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include -#include - -union jbpdata { - unsigned int idx; - unsigned char data[4]; -}; - -void synthIn(JitterBufferPacket *in, int idx, int span) { - union jbpdata d; - d.idx = idx; - - in->data = d.data; - in->len = sizeof(d); - in->timestamp = idx * 10; - in->span = span * 10; - in->sequence = idx; - in->user_data = 0; -} - -void jitterFill(JitterBuffer *jb) { - char buffer[65536]; - JitterBufferPacket in, out; - int i; - - out.data = buffer; - - jitter_buffer_reset(jb); - - for(i=0;i<100;++i) { - synthIn(&in, i, 1); - jitter_buffer_put(jb, &in); - - out.len = 65536; - if (jitter_buffer_get(jb, &out, 10, NULL) != JITTER_BUFFER_OK) { - printf("Fill test failed iteration %d\n", i); - } - if (out.timestamp != i * 10) { - printf("Fill test expected %d got %d\n", i*10, out.timestamp); - } - jitter_buffer_tick(jb); - } -} - -int main() -{ - char buffer[65536]; - JitterBufferPacket in, out; - int i; - - JitterBuffer *jb = jitter_buffer_init(10); - - out.data = buffer; - - /* Frozen sender case */ - jitterFill(jb); - for(i=0;i<100;++i) { - out.len = 65536; - jitter_buffer_get(jb, &out, 10, NULL); - jitter_buffer_tick(jb); - } - synthIn(&in, 100, 1); - jitter_buffer_put(jb, &in); - out.len = 65536; - if (jitter_buffer_get(jb, &out, 10, NULL) != JITTER_BUFFER_OK) { - printf("Failed frozen sender resynchronize\n"); - } else { - printf("Frozen sender: Jitter %d\n", out.timestamp - 100*10); - } - return 0; -} diff -Nru speex-1.2~rc1.2/libspeex/vbr.c speex-1.2.0/libspeex/vbr.c --- speex-1.2~rc1.2/libspeex/vbr.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/vbr.c 2015-07-23 18:05:56.000000000 +0000 @@ -1,4 +1,4 @@ -/* Copyright (C) 2002 Jean-Marc Valin +/* Copyright (C) 2002 Jean-Marc Valin File: vbr.c VBR-related routines @@ -6,18 +6,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -49,14 +49,14 @@ const float vbr_nb_thresh[9][11]={ {-1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f}, /* CNG */ - { 4.0f, 2.5f, 2.0f, 1.2f, 0.5f, 0.0f, -0.5f, -0.7f, -0.8f, -0.9f, -1.0f}, /* 2 kbps */ - {10.0f, 6.5f, 5.2f, 4.5f, 3.9f, 3.5f, 3.0f, 2.5f, 2.3f, 1.8f, 1.0f}, /* 6 kbps */ - {11.0f, 8.8f, 7.5f, 6.5f, 5.0f, 3.9f, 3.9f, 3.9f, 3.5f, 3.0f, 1.0f}, /* 8 kbps */ - {11.0f, 11.0f, 9.9f, 8.5f, 7.0f, 6.0f, 4.5f, 4.0f, 4.0f, 4.0f, 2.0f}, /* 11 kbps */ - {11.0f, 11.0f, 11.0f, 11.0f, 9.5f, 8.5f, 8.0f, 7.0f, 6.0f, 5.0f, 3.0f}, /* 15 kbps */ - {11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 9.5f, 8.5f, 7.0f, 6.0f, 5.0f}, /* 18 kbps */ - {11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 9.8f, 9.5f, 7.5f}, /* 24 kbps */ - { 7.0f, 4.5f, 3.7f, 3.0f, 2.5f, 2.0f, 1.8f, 1.5f, 1.0f, 0.0f, 0.0f} /* 4 kbps */ + { 4.0f, 2.5f, 2.0f, 1.2f, 0.5f,-0.25f, -0.5f, -0.7f, -0.8f, -0.9f, -1.0f}, /* 2 kbps */ + {10.0f, 6.5f, 5.2f, 4.5f, 3.9f, 3.7f, 3.0f, 2.5f, 2.3f, 1.8f, 1.0f}, /* 6 kbps */ + {11.0f, 8.8f, 7.5f, 6.5f, 5.0f, 4.2f, 3.9f, 3.9f, 3.5f, 3.0f, 1.0f}, /* 8 kbps */ + {11.0f, 11.0f, 9.9f, 8.5f, 7.0f, 5.25f, 4.5f, 4.0f, 4.0f, 4.0f, 2.0f}, /* 11 kbps */ + {11.0f, 11.0f, 11.0f, 11.0f, 9.5f, 9.25f, 8.0f, 7.0f, 5.0f, 4.0f, 3.0f}, /* 15 kbps */ + {11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 9.5f, 8.5f, 6.2f, 5.2f, 5.0f}, /* 18 kbps */ + {11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 10.0f, 9.8f, 7.5f}, /* 24 kbps */ + { 7.0f, 4.5f, 3.7f, 3.0f, 2.5f, 1.0f, 1.8f, 1.5f, 1.0f, 0.0f, 0.0f} /* 4 kbps */ }; @@ -65,7 +65,7 @@ {-1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f, -1.0f}, /* 2 kbps */ {11.0f, 11.0f, 9.5f, 8.5f, 7.5f, 6.0f, 5.0f, 3.9f, 3.0f, 2.0f, 1.0f}, /* 6 kbps */ {11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 9.5f, 8.7f, 7.8f, 7.0f, 6.5f, 4.0f}, /* 10 kbps */ - {11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 9.8f, 7.5f, 5.5f} /* 18 kbps */ + {11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 11.0f, 9.8f, 7.5f, 5.5f} /* 18 kbps */ }; const float vbr_uhb_thresh[2][11]={ @@ -77,10 +77,9 @@ { int i; - vbr->average_energy=0; + vbr->average_energy=1600000; vbr->last_energy=1; vbr->accum_sum=0; - vbr->energy_alpha=.1; vbr->soft_pitch=0; vbr->last_pitch_coef=0; vbr->last_quality=0; @@ -116,7 +115,7 @@ -Decrease bit-rate for males (low pitch)? - -(wideband only) less bits in the high-band when signal is very + -(wideband only) less bits in the high-band when signal is very non-stationary (harder to notice high-frequency noise)??? */ @@ -126,7 +125,6 @@ int i; float ener=0, ener1=0, ener2=0; float qual=7; - int va; float log_energy; float non_st=0; float voicing; @@ -147,7 +145,7 @@ non_st=1; voicing = 3*(pitch_coef-.4)*fabs(pitch_coef-.4); - vbr->average_energy = (1-vbr->energy_alpha)*vbr->average_energy + vbr->energy_alpha*ener; + vbr->average_energy = 0.9*vbr->average_energy + .1*ener; vbr->noise_level=vbr->noise_accum/vbr->noise_accum_count; pow_ener = pow(ener,NOISE_POW); if (vbr->noise_accum_count<.06 && ener>MIN_ENERGY) @@ -159,11 +157,11 @@ || (voicing<0 && non_st < .05)) { float tmp; - va = 0; + vbr->consec_noise++; if (pow_ener > 3*vbr->noise_level) tmp = 3*vbr->noise_level; - else + else tmp = pow_ener; if (vbr->consec_noise>=4) { @@ -171,14 +169,13 @@ vbr->noise_accum_count = .95*vbr->noise_accum_count + .05; } } else { - va = 1; vbr->consec_noise=0; } if (pow_ener < vbr->noise_level && ener>MIN_ENERGY) { vbr->noise_accum = .95*vbr->noise_accum + .05*pow_ener; - vbr->noise_accum_count = .95*vbr->noise_accum_count + .05; + vbr->noise_accum_count = .95*vbr->noise_accum_count + .05; } /* Checking for very low absolute energy */ @@ -208,14 +205,14 @@ { if (short_diff>5) short_diff=5; - qual += .5*short_diff; + qual += 1*short_diff; } /* Checking for energy increases */ if (ener2 > 1.6*ener1) qual += .5; } vbr->last_energy = ener; - vbr->soft_pitch = .6*vbr->soft_pitch + .4*pitch_coef; + vbr->soft_pitch = .8*vbr->soft_pitch + .2*pitch_coef; qual += 2.2*((pitch_coef-.4) + (vbr->soft_pitch-.4)); if (qual < vbr->last_quality) @@ -224,7 +221,7 @@ qual=4; if (qual>10) qual=10; - + /* if (vbr->consec_noise>=2) qual-=1.3; @@ -240,8 +237,8 @@ qual -= 1.0 * (log(3.0 + vbr->consec_noise)-log(3)); if (qual<0) qual=0; - - if (ener<60000) + + if (ener<1600000) { if (vbr->consec_noise>2) qual-=0.5*(log(3.0 + vbr->consec_noise)-log(3)); @@ -249,12 +246,12 @@ qual-=0.5*(log(3.0 + vbr->consec_noise)-log(3)); if (qual<0) qual=0; - qual += .3*log(.0001+ener/60000.0); + qual += .3*log(.0001+ener/1600000.0); } if (qual<-1) qual=-1; - /*printf ("%f %f %f %f %d\n", qual, voicing, non_st, pow_ener/(.01+vbr->noise_level), va);*/ + /*printf ("%f %f %f %f\n", qual, voicing, non_st, pow_ener/(.01+vbr->noise_level));*/ vbr->last_pitch_coef = pitch_coef; vbr->last_quality = qual; @@ -263,7 +260,7 @@ vbr->last_log_energy[i] = vbr->last_log_energy[i-1]; vbr->last_log_energy[0] = log_energy; - /*printf ("VBR: %f %f %f %d %f\n", (float)(log_energy-log(vbr->average_energy+MIN_ENERGY)), non_st, voicing, va, vbr->noise_level);*/ + /*printf ("VBR: %f %f %f %f\n", (float)(log_energy-log(vbr->average_energy+MIN_ENERGY)), non_st, voicing, vbr->noise_level);*/ return qual; } diff -Nru speex-1.2~rc1.2/libspeex/vbr.h speex-1.2.0/libspeex/vbr.h --- speex-1.2~rc1.2/libspeex/vbr.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/libspeex/vbr.h 2015-07-06 15:01:58.000000000 +0000 @@ -47,7 +47,6 @@ /** VBR state. */ typedef struct VBRState { - float energy_alpha; float average_energy; float last_energy; float last_log_energy[VBR_MEMORY_SIZE]; diff -Nru speex-1.2~rc1.2/libspeex/vorbis_psy.c speex-1.2.0/libspeex/vorbis_psy.c --- speex-1.2~rc1.2/libspeex/vorbis_psy.c 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/libspeex/vorbis_psy.c 2015-07-06 15:02:01.000000000 +0000 @@ -0,0 +1,509 @@ +/* Copyright (C) 2005 Jean-Marc Valin, CSIRO, Christopher Montgomery + File: vorbis_psy.c + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + - Neither the name of the Xiph.org Foundation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#ifdef VORBIS_PSYCHO + +#include "arch.h" +#include "smallft.h" +#include "lpc.h" +#include "vorbis_psy.h" +#include "os_support.h" + +#include +#include +#include + +/* psychoacoustic setup ********************************************/ + +static VorbisPsyInfo example_tuning = { + + .5,.5, + 3,3,25, + + /*63 125 250 500 1k 2k 4k 8k 16k*/ + // vorbis mode 4 style + //{-32,-32,-32,-32,-28,-24,-22,-20,-20, -20, -20, -8, -6, -6, -6, -6, -6}, + { -4, -6, -6, -6, -6, -6, -6, -6, -8, -8,-10,-10, -8, -6, -4, -4, -2}, + + { + 0, 1, 2, 3, 4, 5, 5, 5, /* 7dB */ + 6, 6, 6, 5, 4, 4, 4, 4, /* 15dB */ + 4, 4, 5, 5, 5, 6, 6, 6, /* 23dB */ + 7, 7, 7, 8, 8, 8, 9, 10, /* 31dB */ + 11,12,13,14,15,16,17, 18, /* 39dB */ + } + +}; + + + +/* there was no great place to put this.... */ +#include +static void _analysis_output(char *base,int i,float *v,int n,int bark,int dB){ + int j; + FILE *of; + char buffer[80]; + + sprintf(buffer,"%s_%d.m",base,i); + of=fopen(buffer,"w"); + + if(!of)perror("failed to open data dump file"); + + for(j=0;j> 16; + if( lo>=0 ) break; + hi = b[i] & 0xffff; + + tN = N[hi] + N[-lo]; + tX = X[hi] - X[-lo]; + tXX = XX[hi] + XX[-lo]; + tY = Y[hi] + Y[-lo]; + tXY = XY[hi] - XY[-lo]; + + A = tY * tXX - tX * tXY; + B = tN * tXY - tX * tY; + D = tN * tXX - tX * tX; + R = (A + x * B) / D; + if (R < 0.f) + R = 0.f; + + noise[i] = R - offset; + } + + for ( ;; i++, x += 1.f) { + + lo = b[i] >> 16; + hi = b[i] & 0xffff; + if(hi>=n)break; + + tN = N[hi] - N[lo]; + tX = X[hi] - X[lo]; + tXX = XX[hi] - XX[lo]; + tY = Y[hi] - Y[lo]; + tXY = XY[hi] - XY[lo]; + + A = tY * tXX - tX * tXY; + B = tN * tXY - tX * tY; + D = tN * tXX - tX * tX; + R = (A + x * B) / D; + if (R < 0.f) R = 0.f; + + noise[i] = R - offset; + } + for ( ; i < n; i++, x += 1.f) { + + R = (A + x * B) / D; + if (R < 0.f) R = 0.f; + + noise[i] = R - offset; + } + + if (fixed <= 0) return; + + for (i = 0, x = 0.f;; i++, x += 1.f) { + hi = i + fixed / 2; + lo = hi - fixed; + if(lo>=0)break; + + tN = N[hi] + N[-lo]; + tX = X[hi] - X[-lo]; + tXX = XX[hi] + XX[-lo]; + tY = Y[hi] + Y[-lo]; + tXY = XY[hi] - XY[-lo]; + + + A = tY * tXX - tX * tXY; + B = tN * tXY - tX * tY; + D = tN * tXX - tX * tX; + R = (A + x * B) / D; + + if (R - offset < noise[i]) noise[i] = R - offset; + } + for ( ;; i++, x += 1.f) { + + hi = i + fixed / 2; + lo = hi - fixed; + if(hi>=n)break; + + tN = N[hi] - N[lo]; + tX = X[hi] - X[lo]; + tXX = XX[hi] - XX[lo]; + tY = Y[hi] - Y[lo]; + tXY = XY[hi] - XY[lo]; + + A = tY * tXX - tX * tXY; + B = tN * tXY - tX * tY; + D = tN * tXX - tX * tX; + R = (A + x * B) / D; + + if (R - offset < noise[i]) noise[i] = R - offset; + } + for ( ; i < n; i++, x += 1.f) { + R = (A + x * B) / D; + if (R - offset < noise[i]) noise[i] = R - offset; + } +} + +static void _vp_noisemask(VorbisPsy *p, + float *logfreq, + float *logmask){ + + int i,n=p->n/2; + float *work=alloca(n*sizeof(*work)); + + bark_noise_hybridmp(n,p->bark,logfreq,logmask, + 140.,-1); + + for(i=0;ibark,work,logmask,0., + p->vi->noisewindowfixed); + + for(i=0;i=NOISE_COMPAND_LEVELS)dB=NOISE_COMPAND_LEVELS-1; + if(dB<0)dB=0; + logmask[i]= work[i]+p->vi->noisecompand[dB]+p->noiseoffset[i]; + } + +} + +VorbisPsy *vorbis_psy_init(int rate, int n) +{ + long i,j,lo=-99,hi=1; + VorbisPsy *p = speex_alloc(sizeof(VorbisPsy)); + memset(p,0,sizeof(*p)); + + p->n = n; + spx_drft_init(&p->lookup, n); + p->bark = speex_alloc(n*sizeof(*p->bark)); + p->rate=rate; + p->vi = &example_tuning; + + /* BH4 window */ + p->window = speex_alloc(sizeof(*p->window)*n); + float a0 = .35875f; + float a1 = .48829f; + float a2 = .14128f; + float a3 = .01168f; + for(i=0;iwindow[i] = //a0 - a1*cos(2.*M_PI/n*(i+.5)) + a2*cos(4.*M_PI/n*(i+.5)) - a3*cos(6.*M_PI/n*(i+.5)); + sin((i+.5)/n * M_PI)*sin((i+.5)/n * M_PI); + /* bark scale lookups */ + for(i=0;ivi->noisewindowlominvi->noisewindowlo);lo++); + + for(;hi<=n && (hivi->noisewindowhimin || + toBARK(rate/(2*n)*hi)<(bark+p->vi->noisewindowhi));hi++); + + p->bark[i]=((lo-1)<<16)+(hi-1); + + } + + /* set up rolling noise median */ + p->noiseoffset=speex_alloc(n*sizeof(*p->noiseoffset)); + + for(i=0;i=P_BANDS-1)halfoc=P_BANDS-1; + inthalfoc=(int)halfoc; + del=halfoc-inthalfoc; + + p->noiseoffset[i]= + p->vi->noiseoff[inthalfoc]*(1.-del) + + p->vi->noiseoff[inthalfoc+1]*del; + + } +#if 0 + _analysis_output_always("noiseoff0",ls,p->noiseoffset,n,1,0,0); +#endif + + return p; +} + +void vorbis_psy_destroy(VorbisPsy *p) +{ + if(p){ + spx_drft_clear(&p->lookup); + if(p->bark) + speex_free(p->bark); + if(p->noiseoffset) + speex_free(p->noiseoffset); + if(p->window) + speex_free(p->window); + memset(p,0,sizeof(*p)); + speex_free(p); + } +} + +void compute_curve(VorbisPsy *psy, float *audio, float *curve) +{ + int i; + float work[psy->n]; + + float scale=4.f/psy->n; + float scale_dB; + + scale_dB=todB(scale); + + /* window the PCM data; use a BH4 window, not vorbis */ + for(i=0;in;i++) + work[i]=audio[i] * psy->window[i]; + + { + static int seq=0; + + //_analysis_output("win",seq,work,psy->n,0,0); + + seq++; + } + + /* FFT yields more accurate tonal estimation (not phase sensitive) */ + spx_drft_forward(&psy->lookup,work); + + /* magnitudes */ + work[0]=scale_dB+todB(work[0]); + for(i=1;in-1;i+=2){ + float temp = work[i]*work[i] + work[i+1]*work[i+1]; + work[(i+1)>>1] = scale_dB+.5f * todB(temp); + } + + /* derive a noise curve */ + _vp_noisemask(psy,work,curve); +#define SIDEL 12 + for (i=0;in>>1)-i-1]=curve[(psy->n>>1)-SIDEH]; + } + for(i=0;i<((psy->n)>>1);i++) + curve[i] = fromdB(1.2*curve[i]+.2*i); + //curve[i] = fromdB(0.8*curve[i]+.35*i); + //curve[i] = fromdB(0.9*curve[i])*pow(1.0*i+45,1.3); +} + +/* Transform a masking curve (power spectrum) into a pole-zero filter */ +void curve_to_lpc(VorbisPsy *psy, float *curve, float *awk1, float *awk2, int ord) +{ + int i; + float ac[psy->n]; + float tmp; + int len = psy->n >> 1; + for (i=0;i<2*len;i++) + ac[i] = 0; + for (i=1;ilookup, ac); + _spx_lpc(awk1, ac, ord); + tmp = 1.; + for (i=0;ilookup, ac); + /* Compute (power) response of awk1 (all zero) */ + ac[0] *= ac[0]; + for (i=1;ilookup, ac); + _spx_lpc(awk2, ac, ord); + tmp = 1; + for (i=0;i +#include + +#define ORDER 10 +#define CURVE_SIZE 24 + +int main() +{ + int i; + float curve[CURVE_SIZE]; + float awk1[ORDER], awk2[ORDER]; + for (i=0;i, 1996 -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# Copyright (C) 1996-2015 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -23,881 +26,2112 @@ # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, -# or obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with this program. If not, see . -# Usage: $progname [OPTION]... [MODE-ARG]... -# -# Provide generalized library-building support services. -# -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --no-quiet, --no-silent -# print informational messages (default) -# --no-warn don't display warning messages -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print more informational messages than default -# --no-verbose don't print the extra informational messages -# --version print version information -# -h, --help, --help-all print short, long, or detailed help message -# -# MODE must be one of the following: -# -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory -# -# MODE-ARGS vary depending on the MODE. When passed as first option, -# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. -# Try `$progname --help --mode=MODE' for a more detailed description of MODE. -# -# When reporting a bug, please describe a test case to reproduce it and -# include the following information: -# -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1.7 -# automake: $automake_version -# autoconf: $autoconf_version -# -# Report bugs to . -# GNU libtool home page: . -# General help using GNU software: . PROGRAM=libtool PACKAGE=libtool -VERSION="2.4.2 Debian-2.4.2-1.7" -TIMESTAMP="" -package_revision=1.3337 +VERSION="2.4.6 Debian-2.4.6-0.1" +package_revision=2.4.6 -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + +## ------ ## +## Usage. ## +## ------ ## + +# Run './libtool --help' for help with using this script from the +# command line. + + +## ------------------------------- ## +## User overridable command paths. ## +## ------------------------------- ## + +# After configure completes, it has a better idea of some of the +# shell tools we need than the defaults used by the functions shared +# with bootstrap, so set those here where they can still be over- +# ridden by the user, but otherwise take precedence. + +: ${AUTOCONF="autoconf"} +: ${AUTOMAKE="automake"} + + +## -------------------------- ## +## Source external libraries. ## +## -------------------------- ## + +# Much of our low-level functionality needs to be sourced from external +# libraries, which are installed to $pkgauxdir. + +# Set a version string for this script. +scriptversion=2015-01-20.17; # UTC + +# General shell script boiler plate, and helper functions. +# Written by Gary V. Vaughan, 2004 + +# Copyright (C) 2004-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. + +# As a special exception to the GNU General Public License, if you distribute +# this file as part of a program or library that is built using GNU Libtool, +# you may include this file under the same distribution terms that you use +# for the rest of that program. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Please report bugs or propose patches to gary@gnu.org. + + +## ------ ## +## Usage. ## +## ------ ## + +# Evaluate this file near the top of your script to gain access to +# the functions and variables defined here: +# +# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh +# +# If you need to override any of the default environment variable +# settings, do that before evaluating this file. + + +## -------------------- ## +## Shell normalisation. ## +## -------------------- ## + +# Some shells need a little help to be as Bourne compatible as possible. +# Before doing anything else, make sure all that help has been provided! + +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac + case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' -} -# NLS nuisances: We save the old values to restore during execute mode. -lt_user_locale= -lt_safe_locale= -for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +# NLS nuisances: We save the old values in case they are required later. +_G_user_locale= +_G_safe_locale= +for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do - eval "if test \"\${$lt_var+set}\" = set; then - save_$lt_var=\$$lt_var - $lt_var=C - export $lt_var - lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" - lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + eval "if test set = \"\${$_G_var+set}\"; then + save_$_G_var=\$$_G_var + $_G_var=C + export $_G_var + _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\" + _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" fi" done -LC_ALL=C -LANGUAGE=C -export LANGUAGE LC_ALL -$lt_unset CDPATH +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Make sure IFS has a sensible default +sp=' ' +nl=' +' +IFS="$sp $nl" +# There are apparently some retarded systems that use ';' as a PATH separator! +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" +## ------------------------- ## +## Locate command utilities. ## +## ------------------------- ## + + +# func_executable_p FILE +# ---------------------- +# Check that FILE is an executable regular file. +func_executable_p () +{ + test -f "$1" && test -x "$1" +} + + +# func_path_progs PROGS_LIST CHECK_FUNC [PATH] +# -------------------------------------------- +# Search for either a program that responds to --version with output +# containing "GNU", or else returned by CHECK_FUNC otherwise, by +# trying all the directories in PATH with each of the elements of +# PROGS_LIST. +# +# CHECK_FUNC should accept the path to a candidate program, and +# set $func_check_prog_result if it truncates its output less than +# $_G_path_prog_max characters. +func_path_progs () +{ + _G_progs_list=$1 + _G_check_func=$2 + _G_PATH=${3-"$PATH"} + + _G_path_prog_max=0 + _G_path_prog_found=false + _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:} + for _G_dir in $_G_PATH; do + IFS=$_G_save_IFS + test -z "$_G_dir" && _G_dir=. + for _G_prog_name in $_G_progs_list; do + for _exeext in '' .EXE; do + _G_path_prog=$_G_dir/$_G_prog_name$_exeext + func_executable_p "$_G_path_prog" || continue + case `"$_G_path_prog" --version 2>&1` in + *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; + *) $_G_check_func $_G_path_prog + func_path_progs_result=$func_check_prog_result + ;; + esac + $_G_path_prog_found && break 3 + done + done + done + IFS=$_G_save_IFS + test -z "$func_path_progs_result" && { + echo "no acceptable sed could be found in \$PATH" >&2 + exit 1 + } +} + + +# We want to be able to use the functions in this file before configure +# has figured out where the best binaries are kept, which means we have +# to search for them ourselves - except when the results are already set +# where we skip the searches. + +# Unless the user overrides by setting SED, search the path for either GNU +# sed, or the sed that truncates its output the least. +test -z "$SED" && { + _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for _G_i in 1 2 3 4 5 6 7; do + _G_sed_script=$_G_sed_script$nl$_G_sed_script + done + echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed + _G_sed_script= + + func_check_prog_sed () + { + _G_path_prog=$1 + + _G_count=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo '' >> conftest.nl + "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin + rm -f conftest.sed + SED=$func_path_progs_result +} + + +# Unless the user overrides by setting GREP, search the path for either GNU +# grep, or the grep that truncates its output the least. +test -z "$GREP" && { + func_check_prog_grep () + { + _G_path_prog=$1 + + _G_count=0 + _G_path_prog_max=0 + printf 0123456789 >conftest.in + while : + do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo 'GREP' >> conftest.nl + "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break + diff conftest.out conftest.nl >/dev/null 2>&1 || break + _G_count=`expr $_G_count + 1` + if test "$_G_count" -gt "$_G_path_prog_max"; then + # Best one so far, save it but keep looking for a better one + func_check_prog_result=$_G_path_prog + _G_path_prog_max=$_G_count + fi + # 10*(2^10) chars as input seems more than enough + test 10 -lt "$_G_count" && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out + } + + func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin + GREP=$func_path_progs_result +} + + +## ------------------------------- ## +## User overridable command paths. ## +## ------------------------------- ## + +# All uppercase variable names are used for environment variables. These +# variables can be overridden by the user before calling a script that +# uses them if a suitable command of that name is not already available +# in the command search PATH. : ${CP="cp -f"} -test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${ECHO="printf %s\n"} +: ${EGREP="$GREP -E"} +: ${FGREP="$GREP -F"} +: ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} -: ${Xsed="$SED -e 1s/^X//"} - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -exit_status=$EXIT_SUCCESS - -# Make sure IFS has a sensible default -lt_nl=' -' -IFS=" $lt_nl" -dirname="s,/[^/]*$,," -basename="s,^.*/,," -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} # func_dirname may be replaced by extended shell implementation +## -------------------- ## +## Useful sed snippets. ## +## -------------------- ## +sed_dirname='s|/[^/]*$||' +sed_basename='s|^.*/||' -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "${1}" | $SED "$basename"` -} # func_basename may be replaced by extended shell implementation +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s|\([`"$\\]\)|\\\1|g' +# Same as above, but do not quote variable references. +sed_double_quote_subst='s/\(["`\\]\)/\\\1/g' -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` -} # func_dirname_and_basename may be replaced by extended shell implementation +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g' +# Sed substitution that converts a w32 file name or path +# that contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname may be replaced by extended shell implementation +# Re-'\' parameter expansions in output of sed_double_quote_subst that +# were '\'-ed in input to the same. If an odd number of '\' preceded a +# '$' in input to sed_double_quote_subst, that '$' was protected from +# expansion. Since each input '\' is now two '\'s, look for any number +# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'. +_G_bs='\\' +_G_bs2='\\\\' +_G_bs4='\\\\\\\\' +_G_dollar='\$' +sed_double_backslash="\ + s/$_G_bs4/&\\ +/g + s/^$_G_bs2$_G_dollar/$_G_bs&/ + s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g + s/\n//g" -# These SED scripts presuppose an absolute path with a trailing slash. -pathcar='s,^/\([^/]*\).*$,\1,' -pathcdr='s,^/[^/]*,,' -removedotparts=':dotsl - s@/\./@/@g - t dotsl - s,/\.$,/,' -collapseslashes='s@/\{1,\}@/@g' -finalslash='s,/*$,/,' +## ----------------- ## +## Global variables. ## +## ----------------- ## + +# Except for the global variables explicitly listed below, the following +# functions in the '^func_' namespace, and the '^require_' namespace +# variables initialised in the 'Resource management' section, sourcing +# this file will not pollute your global namespace with anything +# else. There's no portable way to scope variables in Bourne shell +# though, so actually running these functions will sometimes place +# results into a variable named after the function, and often use +# temporary variables in the '^_G_' namespace. If you are careful to +# avoid using those namespaces casually in your sourcing script, things +# should continue to work as you expect. And, of course, you can freely +# overwrite any of the functions or variables defined here before +# calling anything to customize them. -# func_normal_abspath PATH -# Remove doubled-up and trailing slashes, "." path components, -# and cancel out any ".." path components in PATH after making -# it an absolute path. -# value returned in "$func_normal_abspath_result" -func_normal_abspath () -{ - # Start from root dir and reassemble the path. - func_normal_abspath_result= - func_normal_abspath_tpath=$1 - func_normal_abspath_altnamespace= - case $func_normal_abspath_tpath in - "") - # Empty path, that just means $cwd. - func_stripname '' '/' "`pwd`" - func_normal_abspath_result=$func_stripname_result - return - ;; - # The next three entries are used to spot a run of precisely - # two leading slashes without using negated character classes; - # we take advantage of case's first-match behaviour. - ///*) - # Unusual form of absolute path, do nothing. - ;; - //*) - # Not necessarily an ordinary path; POSIX reserves leading '//' - # and for example Cygwin uses it to access remote file shares - # over CIFS/SMB, so we conserve a leading double slash if found. - func_normal_abspath_altnamespace=/ - ;; - /*) - # Absolute path, do nothing. - ;; - *) - # Relative path, prepend $cwd. - func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; - esac - # Cancel out all the simple stuff to save iterations. We also want - # the path to end with a slash for ease of parsing, so make sure - # there is one (and only one) here. - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` - while :; do - # Processed it all yet? - if test "$func_normal_abspath_tpath" = / ; then - # If we ascended to the root using ".." the result may be empty now. - if test -z "$func_normal_abspath_result" ; then - func_normal_abspath_result=/ - fi - break - fi - func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcar"` - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcdr"` - # Figure out what to do with it - case $func_normal_abspath_tcomponent in - "") - # Trailing empty path component, ignore it. - ;; - ..) - # Parent dir; strip last assembled component from result. - func_dirname "$func_normal_abspath_result" - func_normal_abspath_result=$func_dirname_result - ;; - *) - # Actual path component, append it. - func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent - ;; - esac - done - # Restore leading double-slash if one was found on entry. - func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result -} +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. -# func_relative_path SRCDIR DSTDIR -# generates a relative path from SRCDIR to DSTDIR, with a trailing -# slash if non-empty, suitable for immediately appending a filename -# without needing to append a separator. -# value returned in "$func_relative_path_result" -func_relative_path () -{ - func_relative_path_result= - func_normal_abspath "$1" - func_relative_path_tlibdir=$func_normal_abspath_result - func_normal_abspath "$2" - func_relative_path_tbindir=$func_normal_abspath_result - - # Ascend the tree starting from libdir - while :; do - # check if we have found a prefix of bindir - case $func_relative_path_tbindir in - $func_relative_path_tlibdir) - # found an exact match - func_relative_path_tcancelled= - break - ;; - $func_relative_path_tlibdir*) - # found a matching prefix - func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" - func_relative_path_tcancelled=$func_stripname_result - if test -z "$func_relative_path_result"; then - func_relative_path_result=. - fi - break - ;; - *) - func_dirname $func_relative_path_tlibdir - func_relative_path_tlibdir=${func_dirname_result} - if test "x$func_relative_path_tlibdir" = x ; then - # Have to descend all the way to the root! - func_relative_path_result=../$func_relative_path_result - func_relative_path_tcancelled=$func_relative_path_tbindir - break - fi - func_relative_path_result=../$func_relative_path_result - ;; - esac - done +# Allow overriding, eg assuming that you follow the convention of +# putting '$debug_cmd' at the start of all your functions, you can get +# bash to show function call trace with: +# +# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name +debug_cmd=${debug_cmd-":"} +exit_cmd=: - # Now calculate path; take care to avoid doubling-up slashes. - func_stripname '' '/' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - func_stripname '/' '/' "$func_relative_path_tcancelled" - if test "x$func_stripname_result" != x ; then - func_relative_path_result=${func_relative_path_result}/${func_stripname_result} - fi +# By convention, finish your script with: +# +# exit $exit_status +# +# so that you can set exit_status to non-zero if you want to indicate +# something went wrong during execution without actually bailing out at +# the point of failure. +exit_status=$EXIT_SUCCESS - # Normalisation. If bindir is libdir, return empty string, - # else relative path ending with a slash; either way, target - # file name can be directly appended. - if test ! -z "$func_relative_path_result"; then - func_stripname './' '' "$func_relative_path_result/" - func_relative_path_result=$func_stripname_result - fi -} +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath=$0 -# The name of this program: -func_dirname_and_basename "$progpath" -progname=$func_basename_result +# The name of this program. +progname=`$ECHO "$progpath" |$SED "$sed_basename"` -# Make sure we have an absolute path for reexecution: +# Make sure we have an absolute progpath for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) - progdir=$func_dirname_result + progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` progdir=`cd "$progdir" && pwd` - progpath="$progdir/$progname" + progpath=$progdir/$progname ;; *) - save_IFS="$IFS" + _G_IFS=$IFS IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do - IFS="$save_IFS" + IFS=$_G_IFS test -x "$progdir/$progname" && break done - IFS="$save_IFS" + IFS=$_G_IFS test -n "$progdir" || progdir=`pwd` - progpath="$progdir/$progname" + progpath=$progdir/$progname ;; esac -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution that turns a string into a regex matching for the -# string literally. -sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' -# Sed substitution that converts a w32 file name or path -# which contains forward slashes, into one that contains -# (escaped) backslashes. A very naive implementation. -lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - -# Re-`\' parameter expansions in output of double_quote_subst that were -# `\'-ed in input to the same. If an odd number of `\' preceded a '$' -# in input to double_quote_subst, that '$' was protected from expansion. -# Since each input `\' is now two `\'s, look for any number of runs of -# four `\'s followed by two `\'s and then a '$'. `\' that '$'. -bs='\\' -bs2='\\\\' -bs4='\\\\\\\\' -dollar='\$' -sed_double_backslash="\ - s/$bs4/&\\ -/g - s/^$bs2$dollar/$bs&/ - s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g - s/\n//g" +## ----------------- ## +## Standard options. ## +## ----------------- ## + +# The following options affect the operation of the functions defined +# below, and should be set appropriately depending on run-time para- +# meters passed on the command line. -# Standard options: opt_dry_run=false -opt_help=false opt_quiet=false opt_verbose=false -opt_warning=: - -# func_echo arg... -# Echo program name prefixed message, along with the current mode -# name if it has been set yet. -func_echo () -{ - $ECHO "$progname: ${opt_mode+$opt_mode: }$*" -} -# func_verbose arg... -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $opt_verbose && func_echo ${1+"$@"} +# Categories 'all' and 'none' are always available. Append any others +# you will pass as the first argument to func_warning from your own +# code. +warning_categories= + +# By default, display warnings according to 'opt_warning_types'. Set +# 'warning_func' to ':' to elide all warnings, or func_fatal_error to +# treat the next displayed warning as a fatal error. +warning_func=func_warn_and_continue + +# Set to 'all' to display all warnings, 'none' to suppress all +# warnings, or a space delimited list of some subset of +# 'warning_categories' to display only the listed warnings. +opt_warning_types=all + + +## -------------------- ## +## Resource management. ## +## -------------------- ## + +# This section contains definitions for functions that each ensure a +# particular resource (a file, or a non-empty configuration variable for +# example) is available, and if appropriate to extract default values +# from pertinent package files. Call them using their associated +# 'require_*' variable to ensure that they are executed, at most, once. +# +# It's entirely deliberate that calling these functions can set +# variables that don't obey the namespace limitations obeyed by the rest +# of this file, in order that that they be as useful as possible to +# callers. + + +# require_term_colors +# ------------------- +# Allow display of bold text on terminals that support it. +require_term_colors=func_require_term_colors +func_require_term_colors () +{ + $debug_cmd + + test -t 1 && { + # COLORTERM and USE_ANSI_COLORS environment variables take + # precedence, because most terminfo databases neglect to describe + # whether color sequences are supported. + test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"} + + if test 1 = "$USE_ANSI_COLORS"; then + # Standard ANSI escape sequences + tc_reset='' + tc_bold=''; tc_standout='' + tc_red=''; tc_green='' + tc_blue=''; tc_cyan='' + else + # Otherwise trust the terminfo database after all. + test -n "`tput sgr0 2>/dev/null`" && { + tc_reset=`tput sgr0` + test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold` + tc_standout=$tc_bold + test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso` + test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1` + test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2` + test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4` + test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5` + } + fi + } - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : + require_term_colors=: } -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} -# func_error arg... -# Echo program name prefixed message to standard error. -func_error () -{ - $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 -} +## ----------------- ## +## Function library. ## +## ----------------- ## -# func_warning arg... -# Echo program name prefixed warning message to standard error. -func_warning () -{ - $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 +# This section contains a variety of useful functions to call in your +# scripts. Take note of the portable wrappers for features provided by +# some modern shells, which will fall back to slower equivalents on +# less featureful shells. - # bash bug again: - : -} -# func_fatal_error arg... -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - func_error ${1+"$@"} - exit $EXIT_FAILURE -} +# func_append VAR VALUE +# --------------------- +# Append VALUE onto the existing contents of VAR. -# func_fatal_help arg... -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - func_error ${1+"$@"} - func_fatal_error "$help" -} -help="Try \`$progname --help' for more information." ## default + # We should try to minimise forks, especially on Windows where they are + # unreasonably slow, so skip the feature probes when bash or zsh are + # being used: + if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then + : ${_G_HAVE_ARITH_OP="yes"} + : ${_G_HAVE_XSI_OPS="yes"} + # The += operator was introduced in bash 3.1 + case $BASH_VERSION in + [12].* | 3.0 | 3.0*) ;; + *) + : ${_G_HAVE_PLUSEQ_OP="yes"} + ;; + esac + fi + # _G_HAVE_PLUSEQ_OP + # Can be empty, in which case the shell is probed, "yes" if += is + # useable or anything else if it does not work. + test -z "$_G_HAVE_PLUSEQ_OP" \ + && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ + && _G_HAVE_PLUSEQ_OP=yes + +if test yes = "$_G_HAVE_PLUSEQ_OP" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_append () + { + $debug_cmd + + eval "$1+=\$2" + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_append () + { + $debug_cmd + + eval "$1=\$$1\$2" + } +fi + + +# func_append_quoted VAR VALUE +# ---------------------------- +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +if test yes = "$_G_HAVE_PLUSEQ_OP"; then + eval 'func_append_quoted () + { + $debug_cmd + + func_quote_for_eval "$2" + eval "$1+=\\ \$func_quote_for_eval_result" + }' +else + func_append_quoted () + { + $debug_cmd + + func_quote_for_eval "$2" + eval "$1=\$$1\\ \$func_quote_for_eval_result" + } +fi + + +# func_append_uniq VAR VALUE +# -------------------------- +# Append unique VALUE onto the existing contents of VAR, assuming +# entries are delimited by the first character of VALUE. For example: +# +# func_append_uniq options " --another-option option-argument" +# +# will only append to $options if " --another-option option-argument " +# is not already present somewhere in $options already (note spaces at +# each end implied by leading space in second argument). +func_append_uniq () +{ + $debug_cmd + + eval _G_current_value='`$ECHO $'$1'`' + _G_delim=`expr "$2" : '\(.\)'` + + case $_G_delim$_G_current_value$_G_delim in + *"$2$_G_delim"*) ;; + *) func_append "$@" ;; + esac +} + + +# func_arith TERM... +# ------------------ +# Set func_arith_result to the result of evaluating TERMs. + test -z "$_G_HAVE_ARITH_OP" \ + && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \ + && _G_HAVE_ARITH_OP=yes + +if test yes = "$_G_HAVE_ARITH_OP"; then + eval 'func_arith () + { + $debug_cmd + + func_arith_result=$(( $* )) + }' +else + func_arith () + { + $debug_cmd + + func_arith_result=`expr "$@"` + } +fi + + +# func_basename FILE +# ------------------ +# Set func_basename_result to FILE with everything up to and including +# the last / stripped. +if test yes = "$_G_HAVE_XSI_OPS"; then + # If this shell supports suffix pattern removal, then use it to avoid + # forking. Hide the definitions single quotes in case the shell chokes + # on unsupported syntax... + _b='func_basename_result=${1##*/}' + _d='case $1 in + */*) func_dirname_result=${1%/*}$2 ;; + * ) func_dirname_result=$3 ;; + esac' + +else + # ...otherwise fall back to using sed. + _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`' + _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"` + if test "X$func_dirname_result" = "X$1"; then + func_dirname_result=$3 + else + func_append func_dirname_result "$2" + fi' +fi + +eval 'func_basename () +{ + $debug_cmd + + '"$_b"' +}' + + +# func_dirname FILE APPEND NONDIR_REPLACEMENT +# ------------------------------------------- +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +eval 'func_dirname () +{ + $debug_cmd -# func_grep expression filename + '"$_d"' +}' + + +# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT +# -------------------------------------------------------- +# Perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# For efficiency, we do not delegate to the functions above but instead +# duplicate the functionality here. +eval 'func_dirname_and_basename () +{ + $debug_cmd + + '"$_b"' + '"$_d"' +}' + + +# func_echo ARG... +# ---------------- +# Echo program name prefixed message. +func_echo () +{ + $debug_cmd + + _G_message=$* + + func_echo_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_IFS + $ECHO "$progname: $_G_line" + done + IFS=$func_echo_IFS +} + + +# func_echo_all ARG... +# -------------------- +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + + +# func_echo_infix_1 INFIX ARG... +# ------------------------------ +# Echo program name, followed by INFIX on the first line, with any +# additional lines not showing INFIX. +func_echo_infix_1 () +{ + $debug_cmd + + $require_term_colors + + _G_infix=$1; shift + _G_indent=$_G_infix + _G_prefix="$progname: $_G_infix: " + _G_message=$* + + # Strip color escape sequences before counting printable length + for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" + do + test -n "$_G_tc" && { + _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` + _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` + } + done + _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes + + func_echo_infix_1_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_infix_1_IFS + $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 + _G_prefix=$_G_indent + done + IFS=$func_echo_infix_1_IFS +} + + +# func_error ARG... +# ----------------- +# Echo program name prefixed message to standard error. +func_error () +{ + $debug_cmd + + $require_term_colors + + func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2 +} + + +# func_fatal_error ARG... +# ----------------------- +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + $debug_cmd + + func_error "$*" + exit $EXIT_FAILURE +} + + +# func_grep EXPRESSION FILENAME +# ----------------------------- # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { + $debug_cmd + $GREP "$1" "$2" >/dev/null 2>&1 } -# func_mkdir_p directory-path +# func_len STRING +# --------------- +# Set func_len_result to the length of STRING. STRING may not +# start with a hyphen. + test -z "$_G_HAVE_XSI_OPS" \ + && (eval 'x=a/b/c; + test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ + && _G_HAVE_XSI_OPS=yes + +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_len () + { + $debug_cmd + + func_len_result=${#1} + }' +else + func_len () + { + $debug_cmd + + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` + } +fi + + +# func_mkdir_p DIRECTORY-PATH +# --------------------------- # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { - my_directory_path="$1" - my_dir_list= + $debug_cmd + + _G_directory_path=$1 + _G_dir_list= - if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then - # Protect directory names starting with `-' - case $my_directory_path in - -*) my_directory_path="./$my_directory_path" ;; + # Protect directory names starting with '-' + case $_G_directory_path in + -*) _G_directory_path=./$_G_directory_path ;; esac # While some portion of DIR does not yet exist... - while test ! -d "$my_directory_path"; do + while test ! -d "$_G_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. - my_dir_list="$my_directory_path:$my_dir_list" + _G_dir_list=$_G_directory_path:$_G_dir_list # If the last portion added has no slash in it, the list is done - case $my_directory_path in */*) ;; *) break ;; esac + case $_G_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"` done - my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'` - save_mkdir_p_IFS="$IFS"; IFS=':' - for my_dir in $my_dir_list; do - IFS="$save_mkdir_p_IFS" - # mkdir can fail with a `File exist' error if two processes + func_mkdir_p_IFS=$IFS; IFS=: + for _G_dir in $_G_dir_list; do + IFS=$func_mkdir_p_IFS + # mkdir can fail with a 'File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! - $MKDIR "$my_dir" 2>/dev/null || : + $MKDIR "$_G_dir" 2>/dev/null || : done - IFS="$save_mkdir_p_IFS" + IFS=$func_mkdir_p_IFS # Bail out if we (or some other process) failed to create a directory. - test -d "$my_directory_path" || \ - func_fatal_error "Failed to create \`$1'" + test -d "$_G_directory_path" || \ + func_fatal_error "Failed to create '$1'" fi } -# func_mktempdir [string] +# func_mktempdir [BASENAME] +# ------------------------- # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If -# given, STRING is the basename for that directory. +# given, BASENAME is the basename for that directory. func_mktempdir () { - my_template="${TMPDIR-/tmp}/${1-$progname}" + $debug_cmd + + _G_template=${TMPDIR-/tmp}/${1-$progname} - if test "$opt_dry_run" = ":"; then + if test : = "$opt_dry_run"; then # Return a directory name, but don't create it in dry-run mode - my_tmpdir="${my_template}-$$" + _G_tmpdir=$_G_template-$$ else # If mktemp works, use that first and foremost - my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null` - if test ! -d "$my_tmpdir"; then + if test ! -d "$_G_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" + _G_tmpdir=$_G_template-${RANDOM-0}$$ + + func_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$_G_tmpdir" + umask $func_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$_G_tmpdir" || \ + func_fatal_error "cannot create temporary directory '$_G_tmpdir'" + fi + + $ECHO "$_G_tmpdir" +} + + +# func_normal_abspath PATH +# ------------------------ +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +func_normal_abspath () +{ + $debug_cmd + + # These SED scripts presuppose an absolute path with a trailing slash. + _G_pathcar='s|^/\([^/]*\).*$|\1|' + _G_pathcdr='s|^/[^/]*||' + _G_removedotparts=':dotsl + s|/\./|/|g + t dotsl + s|/\.$|/|' + _G_collapseslashes='s|/\{1,\}|/|g' + _G_finalslash='s|/*$|/|' + + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"` + while :; do + # Processed it all yet? + if test / = "$func_normal_abspath_tpath"; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result"; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$_G_pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent" + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + + +# func_notquiet ARG... +# -------------------- +# Echo program name prefixed message only when not in quiet mode. +func_notquiet () +{ + $debug_cmd + + $opt_quiet || func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + + +# func_relative_path SRCDIR DSTDIR +# -------------------------------- +# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR. +func_relative_path () +{ + $debug_cmd + + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=$func_dirname_result + if test -z "$func_relative_path_tlibdir"; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test -n "$func_stripname_result"; then + func_append func_relative_path_result "/$func_stripname_result" + fi + + # Normalisation. If bindir is libdir, return '.' else relative path. + if test -n "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + fi + + test -n "$func_relative_path_result" || func_relative_path_result=. + + : +} + + +# func_quote_for_eval ARG... +# -------------------------- +# Aesthetically quote ARGs to be evaled later. +# This function returns two values: +# i) func_quote_for_eval_result +# double-quoted, suitable for a subsequent eval +# ii) func_quote_for_eval_unquoted_result +# has all characters that are still active within double +# quotes backslashified. +func_quote_for_eval () +{ + $debug_cmd + + func_quote_for_eval_unquoted_result= + func_quote_for_eval_result= + while test 0 -lt $#; do + case $1 in + *[\\\`\"\$]*) + _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; + *) + _G_unquoted_arg=$1 ;; + esac + if test -n "$func_quote_for_eval_unquoted_result"; then + func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" + else + func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" + fi + + case $_G_unquoted_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and variable expansion + # for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_quoted_arg=\"$_G_unquoted_arg\" + ;; + *) + _G_quoted_arg=$_G_unquoted_arg + ;; + esac + + if test -n "$func_quote_for_eval_result"; then + func_append func_quote_for_eval_result " $_G_quoted_arg" + else + func_append func_quote_for_eval_result "$_G_quoted_arg" + fi + shift + done +} + + +# func_quote_for_expand ARG +# ------------------------- +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + $debug_cmd + + case $1 in + *[\\\`\"]*) + _G_arg=`$ECHO "$1" | $SED \ + -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; + *) + _G_arg=$1 ;; + esac + + case $_G_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_arg=\"$_G_arg\" + ;; + esac + + func_quote_for_expand_result=$_G_arg +} + + +# func_stripname PREFIX SUFFIX NAME +# --------------------------------- +# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_stripname () + { + $debug_cmd + + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary variable first. + func_stripname_result=$3 + func_stripname_result=${func_stripname_result#"$1"} + func_stripname_result=${func_stripname_result%"$2"} + }' +else + func_stripname () + { + $debug_cmd + + case $2 in + .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;; + *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;; + esac + } +fi + + +# func_show_eval CMD [FAIL_EXP] +# ----------------------------- +# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + $debug_cmd + + _G_cmd=$1 + _G_fail_exp=${2-':'} + + func_quote_for_expand "$_G_cmd" + eval "func_notquiet $func_quote_for_expand_result" + + $opt_dry_run || { + eval "$_G_cmd" + _G_status=$? + if test 0 -ne "$_G_status"; then + eval "(exit $_G_status); $_G_fail_exp" + fi + } +} + + +# func_show_eval_locale CMD [FAIL_EXP] +# ------------------------------------ +# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + $debug_cmd + + _G_cmd=$1 + _G_fail_exp=${2-':'} + + $opt_quiet || { + func_quote_for_expand "$_G_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + $opt_dry_run || { + eval "$_G_user_locale + $_G_cmd" + _G_status=$? + eval "$_G_safe_locale" + if test 0 -ne "$_G_status"; then + eval "(exit $_G_status); $_G_fail_exp" + fi + } +} + + +# func_tr_sh +# ---------- +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + $debug_cmd + + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_verbose ARG... +# ------------------- +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $debug_cmd + + $opt_verbose && func_echo "$*" + + : +} + + +# func_warn_and_continue ARG... +# ----------------------------- +# Echo program name prefixed warning message to standard error. +func_warn_and_continue () +{ + $debug_cmd + + $require_term_colors + + func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2 +} + + +# func_warning CATEGORY ARG... +# ---------------------------- +# Echo program name prefixed warning message to standard error. Warning +# messages can be filtered according to CATEGORY, where this function +# elides messages where CATEGORY is not listed in the global variable +# 'opt_warning_types'. +func_warning () +{ + $debug_cmd + + # CATEGORY must be in the warning_categories list! + case " $warning_categories " in + *" $1 "*) ;; + *) func_internal_error "invalid warning category '$1'" ;; + esac + + _G_category=$1 + shift + + case " $opt_warning_types " in + *" $_G_category "*) $warning_func ${1+"$@"} ;; + esac +} + + +# func_sort_ver VER1 VER2 +# ----------------------- +# 'sort -V' is not generally available. +# Note this deviates from the version comparison in automake +# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a +# but this should suffice as we won't be specifying old +# version formats or redundant trailing .0 in bootstrap.conf. +# If we did want full compatibility then we should probably +# use m4_version_compare from autoconf. +func_sort_ver () +{ + $debug_cmd + + printf '%s\n%s\n' "$1" "$2" \ + | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n +} + +# func_lt_ver PREV CURR +# --------------------- +# Return true if PREV and CURR are in the correct order according to +# func_sort_ver, otherwise false. Use it like this: +# +# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." +func_lt_ver () +{ + $debug_cmd + + test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` +} + + +# Local variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-time-zone: "UTC" +# End: +#! /bin/sh + +# Set a version string for this script. +scriptversion=2014-01-07.03; # UTC + +# A portable, pluggable option parser for Bourne shell. +# Written by Gary V. Vaughan, 2010 + +# Copyright (C) 2010-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Please report bugs or propose patches to gary@gnu.org. + + +## ------ ## +## Usage. ## +## ------ ## + +# This file is a library for parsing options in your shell scripts along +# with assorted other useful supporting features that you can make use +# of too. +# +# For the simplest scripts you might need only: +# +# #!/bin/sh +# . relative/path/to/funclib.sh +# . relative/path/to/options-parser +# scriptversion=1.0 +# func_options ${1+"$@"} +# eval set dummy "$func_options_result"; shift +# ...rest of your script... +# +# In order for the '--version' option to work, you will need to have a +# suitably formatted comment like the one at the top of this file +# starting with '# Written by ' and ending with '# warranty; '. +# +# For '-h' and '--help' to work, you will also need a one line +# description of your script's purpose in a comment directly above the +# '# Written by ' line, like the one at the top of this file. +# +# The default options also support '--debug', which will turn on shell +# execution tracing (see the comment above debug_cmd below for another +# use), and '--verbose' and the func_verbose function to allow your script +# to display verbose messages only when your user has specified +# '--verbose'. +# +# After sourcing this file, you can plug processing for additional +# options by amending the variables from the 'Configuration' section +# below, and following the instructions in the 'Option parsing' +# section further down. + +## -------------- ## +## Configuration. ## +## -------------- ## + +# You should override these variables in your script after sourcing this +# file so that they reflect the customisations you have added to the +# option parser. + +# The usage line for option parsing errors and the start of '-h' and +# '--help' output messages. You can embed shell variables for delayed +# expansion at the time the message is displayed, but you will need to +# quote other shell meta-characters carefully to prevent them being +# expanded when the contents are evaled. +usage='$progpath [OPTION]...' + +# Short help message in response to '-h' and '--help'. Add to this or +# override it after sourcing this library to reflect the full set of +# options your script accepts. +usage_message="\ + --debug enable verbose shell tracing + -W, --warnings=CATEGORY + report the warnings falling in CATEGORY [all] + -v, --verbose verbosely report processing + --version print version information and exit + -h, --help print short or long help message and exit +" + +# Additional text appended to 'usage_message' in response to '--help'. +long_help_message=" +Warning categories include: + 'all' show all warnings + 'none' turn off all the warnings + 'error' warnings are treated as fatal errors" + +# Help message printed before fatal option parsing errors. +fatal_help="Try '\$progname --help' for more information." + + + +## ------------------------- ## +## Hook function management. ## +## ------------------------- ## + +# This section contains functions for adding, removing, and running hooks +# to the main code. A hook is just a named list of of function, that can +# be run in order later on. + +# func_hookable FUNC_NAME +# ----------------------- +# Declare that FUNC_NAME will run hooks added with +# 'func_add_hook FUNC_NAME ...'. +func_hookable () +{ + $debug_cmd + + func_append hookable_fns " $1" +} + + +# func_add_hook FUNC_NAME HOOK_FUNC +# --------------------------------- +# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must +# first have been declared "hookable" by a call to 'func_hookable'. +func_add_hook () +{ + $debug_cmd + + case " $hookable_fns " in + *" $1 "*) ;; + *) func_fatal_error "'$1' does not accept hook functions." ;; + esac + + eval func_append ${1}_hooks '" $2"' +} + + +# func_remove_hook FUNC_NAME HOOK_FUNC +# ------------------------------------ +# Remove HOOK_FUNC from the list of functions called by FUNC_NAME. +func_remove_hook () +{ + $debug_cmd + + eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`' +} + + +# func_run_hooks FUNC_NAME [ARG]... +# --------------------------------- +# Run all hook functions registered to FUNC_NAME. +# It is assumed that the list of hook functions contains nothing more +# than a whitespace-delimited list of legal shell function names, and +# no effort is wasted trying to catch shell meta-characters or preserve +# whitespace. +func_run_hooks () +{ + $debug_cmd + + case " $hookable_fns " in + *" $1 "*) ;; + *) func_fatal_error "'$1' does not support hook funcions.n" ;; + esac + + eval _G_hook_fns=\$$1_hooks; shift + + for _G_hook in $_G_hook_fns; do + eval $_G_hook '"$@"' + + # store returned options list back into positional + # parameters for next 'cmd' execution. + eval _G_hook_result=\$${_G_hook}_result + eval set dummy "$_G_hook_result"; shift + done + + func_quote_for_eval ${1+"$@"} + func_run_hooks_result=$func_quote_for_eval_result +} + + + +## --------------- ## +## Option parsing. ## +## --------------- ## + +# In order to add your own option parsing hooks, you must accept the +# full positional parameter list in your hook function, remove any +# options that you action, and then pass back the remaining unprocessed +# options in '_result', escaped suitably for +# 'eval'. Like this: +# +# my_options_prep () +# { +# $debug_cmd +# +# # Extend the existing usage message. +# usage_message=$usage_message' +# -s, --silent don'\''t print informational messages +# ' +# +# func_quote_for_eval ${1+"$@"} +# my_options_prep_result=$func_quote_for_eval_result +# } +# func_add_hook func_options_prep my_options_prep +# +# +# my_silent_option () +# { +# $debug_cmd +# +# # Note that for efficiency, we parse as many options as we can +# # recognise in a loop before passing the remainder back to the +# # caller on the first unrecognised argument we encounter. +# while test $# -gt 0; do +# opt=$1; shift +# case $opt in +# --silent|-s) opt_silent=: ;; +# # Separate non-argument short options: +# -s*) func_split_short_opt "$_G_opt" +# set dummy "$func_split_short_opt_name" \ +# "-$func_split_short_opt_arg" ${1+"$@"} +# shift +# ;; +# *) set dummy "$_G_opt" "$*"; shift; break ;; +# esac +# done +# +# func_quote_for_eval ${1+"$@"} +# my_silent_option_result=$func_quote_for_eval_result +# } +# func_add_hook func_parse_options my_silent_option +# +# +# my_option_validation () +# { +# $debug_cmd +# +# $opt_silent && $opt_verbose && func_fatal_help "\ +# '--silent' and '--verbose' options are mutually exclusive." +# +# func_quote_for_eval ${1+"$@"} +# my_option_validation_result=$func_quote_for_eval_result +# } +# func_add_hook func_validate_options my_option_validation +# +# You'll alse need to manually amend $usage_message to reflect the extra +# options you parse. It's preferable to append if you can, so that +# multiple option parsing hooks can be added safely. + + +# func_options [ARG]... +# --------------------- +# All the functions called inside func_options are hookable. See the +# individual implementations for details. +func_hookable func_options +func_options () +{ + $debug_cmd - save_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$my_tmpdir" - umask $save_mktempdir_umask - fi + func_options_prep ${1+"$@"} + eval func_parse_options \ + ${func_options_prep_result+"$func_options_prep_result"} + eval func_validate_options \ + ${func_parse_options_result+"$func_parse_options_result"} - # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || \ - func_fatal_error "cannot create temporary directory \`$my_tmpdir'" - fi + eval func_run_hooks func_options \ + ${func_validate_options_result+"$func_validate_options_result"} - $ECHO "$my_tmpdir" + # save modified positional parameters for caller + func_options_result=$func_run_hooks_result } -# func_quote_for_eval arg -# Aesthetically quote ARG to be evaled later. -# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT -# is double-quoted, suitable for a subsequent eval, whereas -# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters -# which are still active within double quotes backslashified. -func_quote_for_eval () +# func_options_prep [ARG]... +# -------------------------- +# All initialisations required before starting the option parse loop. +# Note that when calling hook functions, we pass through the list of +# positional parameters. If a hook function modifies that list, and +# needs to propogate that back to rest of this script, then the complete +# modified list must be put in 'func_run_hooks_result' before +# returning. +func_hookable func_options_prep +func_options_prep () { - case $1 in - *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; - *) - func_quote_for_eval_unquoted_result="$1" ;; - esac + $debug_cmd - case $func_quote_for_eval_unquoted_result in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and and variable - # expansion for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" - ;; - *) - func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" - esac + # Option defaults: + opt_verbose=false + opt_warning_types= + + func_run_hooks func_options_prep ${1+"$@"} + + # save modified positional parameters for caller + func_options_prep_result=$func_run_hooks_result } -# func_quote_for_expand arg -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () +# func_parse_options [ARG]... +# --------------------------- +# The main option parsing loop. +func_hookable func_parse_options +func_parse_options () { - case $1 in - *[\\\`\"]*) - my_arg=`$ECHO "$1" | $SED \ - -e "$double_quote_subst" -e "$sed_double_backslash"` ;; - *) - my_arg="$1" ;; - esac + $debug_cmd - case $my_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - my_arg="\"$my_arg\"" - ;; - esac + func_parse_options_result= - func_quote_for_expand_result="$my_arg" -} + # this just eases exit handling + while test $# -gt 0; do + # Defer to hook functions for initial option parsing, so they + # get priority in the event of reusing an option name. + func_run_hooks func_parse_options ${1+"$@"} + # Adjust func_parse_options positional parameters to match + eval set dummy "$func_run_hooks_result"; shift -# func_show_eval cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - my_cmd="$1" - my_fail_exp="${2-:}" + # Break out of the loop if we already parsed every option. + test $# -gt 0 || break - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } + _G_opt=$1 + shift + case $_G_opt in + --debug|-x) debug_cmd='set -x' + func_echo "enabling shell trace mode" + $debug_cmd + ;; + + --no-warnings|--no-warning|--no-warn) + set dummy --warnings none ${1+"$@"} + shift + ;; - if ${opt_dry_run-false}; then :; else - eval "$my_cmd" - my_status=$? - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi + --warnings|--warning|-W) + test $# = 0 && func_missing_arg $_G_opt && break + case " $warning_categories $1" in + *" $1 "*) + # trailing space prevents matching last $1 above + func_append_uniq opt_warning_types " $1" + ;; + *all) + opt_warning_types=$warning_categories + ;; + *none) + opt_warning_types=none + warning_func=: + ;; + *error) + opt_warning_types=$warning_categories + warning_func=func_fatal_error + ;; + *) + func_fatal_error \ + "unsupported warning category: '$1'" + ;; + esac + shift + ;; + + --verbose|-v) opt_verbose=: ;; + --version) func_version ;; + -\?|-h) func_usage ;; + --help) func_help ;; + + # Separate optargs to long options (plugins may need this): + --*=*) func_split_equals "$_G_opt" + set dummy "$func_split_equals_lhs" \ + "$func_split_equals_rhs" ${1+"$@"} + shift + ;; + + # Separate optargs to short options: + -W*) + func_split_short_opt "$_G_opt" + set dummy "$func_split_short_opt_name" \ + "$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-v*|-x*) + func_split_short_opt "$_G_opt" + set dummy "$func_split_short_opt_name" \ + "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; + *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + esac + done + + # save modified positional parameters for caller + func_quote_for_eval ${1+"$@"} + func_parse_options_result=$func_quote_for_eval_result } -# func_show_eval_locale cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () +# func_validate_options [ARG]... +# ------------------------------ +# Perform any sanity checks on option settings and/or unconsumed +# arguments. +func_hookable func_validate_options +func_validate_options () { - my_cmd="$1" - my_fail_exp="${2-:}" + $debug_cmd - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } + # Display all warnings if -W was not given. + test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" - if ${opt_dry_run-false}; then :; else - eval "$lt_user_locale - $my_cmd" - my_status=$? - eval "$lt_safe_locale" - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} + func_run_hooks func_validate_options ${1+"$@"} -# func_tr_sh -# Turn $1 into a string suitable for a shell variable name. -# Result is stored in $func_tr_sh_result. All characters -# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -# if $1 begins with a digit, a '_' is prepended as well. -func_tr_sh () -{ - case $1 in - [0-9]* | *[!a-zA-Z0-9_]*) - func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` - ;; - * ) - func_tr_sh_result=$1 - ;; - esac + # Bail if the options were screwed! + $exit_cmd $EXIT_FAILURE + + # save modified positional parameters for caller + func_validate_options_result=$func_run_hooks_result } -# func_version -# Echo version message to standard output and exit. -func_version () -{ - $opt_debug - $SED -n '/(C)/!b go - :more - /\./!{ - N - s/\n# / / - b more - } - :go - /^# '$PROGRAM' (GNU /,/# warranty; / { - s/^# // - s/^# *$// - s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ - p - }' < "$progpath" - exit $? -} +## ----------------- ## +## Helper functions. ## +## ----------------- ## -# func_usage -# Echo short help message to standard output and exit. -func_usage () +# This section contains the helper functions used by the rest of the +# hookable option parser framework in ascii-betical order. + + +# func_fatal_help ARG... +# ---------------------- +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () { - $opt_debug + $debug_cmd - $SED -n '/^# Usage:/,/^# *.*--help/ { - s/^# // - s/^# *$// - s/\$progname/'$progname'/ - p - }' < "$progpath" - echo - $ECHO "run \`$progname --help | more' for full usage" - exit $? + eval \$ECHO \""Usage: $usage"\" + eval \$ECHO \""$fatal_help"\" + func_error ${1+"$@"} + exit $EXIT_FAILURE } -# func_help [NOEXIT] -# Echo long help message to standard output and exit, -# unless 'noexit' is passed as argument. + +# func_help +# --------- +# Echo long help message to standard output and exit. func_help () { - $opt_debug + $debug_cmd - $SED -n '/^# Usage:/,/# Report bugs to/ { - :print - s/^# // - s/^# *$// - s*\$progname*'$progname'* - s*\$host*'"$host"'* - s*\$SHELL*'"$SHELL"'* - s*\$LTCC*'"$LTCC"'* - s*\$LTCFLAGS*'"$LTCFLAGS"'* - s*\$LD*'"$LD"'* - s/\$with_gnu_ld/'"$with_gnu_ld"'/ - s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ - s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ - p - d - } - /^# .* home page:/b print - /^# General help using/b print - ' < "$progpath" - ret=$? - if test -z "$1"; then - exit $ret - fi + func_usage_message + $ECHO "$long_help_message" + exit 0 } -# func_missing_arg argname + +# func_missing_arg ARGNAME +# ------------------------ # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { - $opt_debug + $debug_cmd - func_error "missing argument for $1." + func_error "Missing argument for '$1'." exit_cmd=exit } -# func_split_short_opt shortopt +# func_split_equals STRING +# ------------------------ +# Set func_split_equals_lhs and func_split_equals_rhs shell variables after +# splitting STRING at the '=' sign. +test -z "$_G_HAVE_XSI_OPS" \ + && (eval 'x=a/b/c; + test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ + && _G_HAVE_XSI_OPS=yes + +if test yes = "$_G_HAVE_XSI_OPS" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_split_equals () + { + $debug_cmd + + func_split_equals_lhs=${1%%=*} + func_split_equals_rhs=${1#*=} + test "x$func_split_equals_lhs" = "x$1" \ + && func_split_equals_rhs= + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_split_equals () + { + $debug_cmd + + func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` + func_split_equals_rhs= + test "x$func_split_equals_lhs" = "x$1" \ + || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` + } +fi #func_split_equals + + +# func_split_short_opt SHORTOPT +# ----------------------------- # Set func_split_short_opt_name and func_split_short_opt_arg shell # variables after splitting SHORTOPT after the 2nd character. -func_split_short_opt () +if test yes = "$_G_HAVE_XSI_OPS" +then + # This is an XSI compatible shell, allowing a faster implementation... + eval 'func_split_short_opt () + { + $debug_cmd + + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"} + }' +else + # ...otherwise fall back to using expr, which is often a shell builtin. + func_split_short_opt () + { + $debug_cmd + + func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` + func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` + } +fi #func_split_short_opt + + +# func_usage +# ---------- +# Echo short help message to standard output and exit. +func_usage () { - my_sed_short_opt='1s/^\(..\).*$/\1/;q' - my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + $debug_cmd - func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` - func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` -} # func_split_short_opt may be replaced by extended shell implementation + func_usage_message + $ECHO "Run '$progname --help |${PAGER-more}' for full usage" + exit 0 +} -# func_split_long_opt longopt -# Set func_split_long_opt_name and func_split_long_opt_arg shell -# variables after splitting LONGOPT at the `=' sign. -func_split_long_opt () +# func_usage_message +# ------------------ +# Echo short help message to standard output. +func_usage_message () { - my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' - my_sed_long_arg='1s/^--[^=]*=//' + $debug_cmd - func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` - func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` -} # func_split_long_opt may be replaced by extended shell implementation + eval \$ECHO \""Usage: $usage"\" + echo + $SED -n 's|^# || + /^Written by/{ + x;p;x + } + h + /^Written by/q' < "$progpath" + echo + eval \$ECHO \""$usage_message"\" +} -exit_cmd=: +# func_version +# ------------ +# Echo version message to standard output and exit. +func_version () +{ + $debug_cmd + printf '%s\n' "$progname $scriptversion" + $SED -n ' + /(C)/!b go + :more + /\./!{ + N + s|\n# | | + b more + } + :go + /^# Written by /,/# warranty; / { + s|^# || + s|^# *$|| + s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| + p + } + /^# Written by / { + s|^# || + p + } + /^warranty; /q' < "$progpath" + exit $? +} -magic="%%%MAGIC variable%%%" -magic_exe="%%%MAGIC EXE variable%%%" +# Local variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-time-zone: "UTC" +# End: -# Global variables. -nonopt= -preserve_args= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -extracted_archives= -extracted_serial=0 +# Set a version string. +scriptversion='(GNU libtool) 2.4.6' -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () +# func_echo ARG... +# ---------------- +# Libtool also displays the current mode in messages, so override +# funclib.sh func_echo with this custom definition. +func_echo () { - eval "${1}=\$${1}\${2}" -} # func_append may be replaced by extended shell implementation + $debug_cmd -# func_append_quoted var value -# Quote VALUE and append to the end of shell variable VAR, separated -# by a space. -func_append_quoted () -{ - func_quote_for_eval "${2}" - eval "${1}=\$${1}\\ \$func_quote_for_eval_result" -} # func_append_quoted may be replaced by extended shell implementation + _G_message=$* + + func_echo_IFS=$IFS + IFS=$nl + for _G_line in $_G_message; do + IFS=$func_echo_IFS + $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" + done + IFS=$func_echo_IFS +} -# func_arith arithmetic-term... -func_arith () +# func_warning ARG... +# ------------------- +# Libtool warnings are not categorized, so override funclib.sh +# func_warning with this simpler definition. +func_warning () { - func_arith_result=`expr "${@}"` -} # func_arith may be replaced by extended shell implementation + $debug_cmd + $warning_func ${1+"$@"} +} -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` -} # func_len may be replaced by extended shell implementation +## ---------------- ## +## Options parsing. ## +## ---------------- ## + +# Hook in the functions to make sure our own options are parsed during +# the option parsing loop. + +usage='$progpath [OPTION]... [MODE-ARG]...' + +# Short help message in response to '-h'. +usage_message="Options: + --config show all configuration variables + --debug enable verbose shell tracing + -n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --mode=MODE use operation mode MODE + --no-warnings equivalent to '-Wnone' + --preserve-dup-deps don't remove duplicate dependency libraries + --quiet, --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + -v, --verbose print more informational messages than default + --version print version information + -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] + -h, --help, --help-all print short, long, or detailed help message +" -# func_lo2o object -func_lo2o () +# Additional text appended to 'usage_message' in response to '--help'. +func_help () { - func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` -} # func_lo2o may be replaced by extended shell implementation + $debug_cmd + func_usage_message + $ECHO "$long_help_message -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` -} # func_xform may be replaced by extended shell implementation +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. When passed as first option, +'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that. +Try '$progname --help --mode=MODE' for a more detailed description of MODE. + +When reporting a bug, please describe a test case to reproduce it and +include the following information: + + host-triplet: $host + shell: $SHELL + compiler: $LTCC + compiler flags: $LTCFLAGS + linker: $LD (gnu? $with_gnu_ld) + version: $progname (GNU libtool) 2.4.6 + automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` + autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` + +Report bugs to . +GNU libtool home page: . +General help using GNU software: ." + exit 0 +} + + +# func_lo2o OBJECT-NAME +# --------------------- +# Transform OBJECT-NAME from a '.lo' suffix to the platform specific +# object suffix. + +lo2o=s/\\.lo\$/.$objext/ +o2lo=s/\\.$objext\$/.lo/ + +if test yes = "$_G_HAVE_XSI_OPS"; then + eval 'func_lo2o () + { + case $1 in + *.lo) func_lo2o_result=${1%.lo}.$objext ;; + * ) func_lo2o_result=$1 ;; + esac + }' + + # func_xform LIBOBJ-OR-SOURCE + # --------------------------- + # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise) + # suffix to a '.lo' libtool-object suffix. + eval 'func_xform () + { + func_xform_result=${1%.*}.lo + }' +else + # ...otherwise fall back to using sed. + func_lo2o () + { + func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"` + } + + func_xform () + { + func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'` + } +fi -# func_fatal_configuration arg... +# func_fatal_configuration ARG... +# ------------------------------- # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. func_fatal_configuration () { - func_error ${1+"$@"} - func_error "See the $PACKAGE documentation for more information." - func_fatal_error "Fatal configuration error." + func__fatal_error ${1+"$@"} \ + "See the $PACKAGE documentation for more information." \ + "Fatal configuration error." } # func_config +# ----------- # Display the configuration for all the tags in this script. func_config () { @@ -915,17 +2149,19 @@ exit $? } + # func_features +# ------------- # Display the features supported by this script. func_features () { echo "host: $host" - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then echo "enable shared libraries" else echo "disable shared libraries" fi - if test "$build_old_libs" = yes; then + if test yes = "$build_old_libs"; then echo "enable static libraries" else echo "disable static libraries" @@ -934,289 +2170,297 @@ exit $? } -# func_enable_tag tagname + +# func_enable_tag TAGNAME +# ----------------------- # Verify that TAGNAME is valid, and either flag an error and exit, or # enable the TAGNAME tag. We also add TAGNAME to the global $taglist # variable here. func_enable_tag () { - # Global variable: - tagname="$1" + # Global variable: + tagname=$1 - re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" - re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" - sed_extractcf="/$re_begincf/,/$re_endcf/p" - - # Validate tagname. - case $tagname in - *[!-_A-Za-z0-9,/]*) - func_fatal_error "invalid tag name: $tagname" - ;; - esac + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf=/$re_begincf/,/$re_endcf/p + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac - # Don't test for the "default" C tag, as we know it's - # there but not specially marked. - case $tagname in - CC) ;; + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; *) - if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then - taglist="$taglist $tagname" + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac } + # func_check_version_match +# ------------------------ # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF - else - cat >&2 <<_LT_EOF + else + cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF - fi - else - cat >&2 <<_LT_EOF + fi + else + cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF - fi + fi - exit $EXIT_MISMATCH - fi + exit $EXIT_MISMATCH + fi } -# Shorthand for --mode=foo, only valid as the first argument -case $1 in -clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; -compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; -execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; -finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; -install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; -link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; -uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; -esac +# libtool_options_prep [ARG]... +# ----------------------------- +# Preparation for options parsed by libtool. +libtool_options_prep () +{ + $debug_mode + # Option defaults: + opt_config=false + opt_dlopen= + opt_dry_run=false + opt_help=false + opt_mode= + opt_preserve_dup_deps=false + opt_quiet=false + nonopt= + preserve_args= -# Option defaults: -opt_debug=: -opt_dry_run=false -opt_config=false -opt_preserve_dup_deps=false -opt_features=false -opt_finish=false -opt_help=false -opt_help_all=false -opt_silent=: -opt_warning=: -opt_verbose=: -opt_silent=false -opt_verbose=false + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac + # Pass back the list of options. + func_quote_for_eval ${1+"$@"} + libtool_options_prep_result=$func_quote_for_eval_result +} +func_add_hook func_options_prep libtool_options_prep -# Parse options once, thoroughly. This comes as soon as possible in the -# script to make things like `--version' happen as quickly as we can. -{ - # this just eases exit handling - while test $# -gt 0; do - opt="$1" - shift - case $opt in - --debug|-x) opt_debug='set -x' - func_echo "enabling shell trace mode" - $opt_debug - ;; - --dry-run|--dryrun|-n) - opt_dry_run=: - ;; - --config) - opt_config=: -func_config - ;; - --dlopen|-dlopen) - optarg="$1" - opt_dlopen="${opt_dlopen+$opt_dlopen -}$optarg" - shift - ;; - --preserve-dup-deps) - opt_preserve_dup_deps=: - ;; - --features) - opt_features=: -func_features - ;; - --finish) - opt_finish=: -set dummy --mode finish ${1+"$@"}; shift - ;; - --help) - opt_help=: - ;; - --help-all) - opt_help_all=: -opt_help=': help-all' - ;; - --mode) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_mode="$optarg" -case $optarg in - # Valid mode arguments: - clean|compile|execute|finish|install|link|relink|uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; -esac - shift - ;; - --no-silent|--no-quiet) - opt_silent=false -func_append preserve_args " $opt" - ;; - --no-warning|--no-warn) - opt_warning=false -func_append preserve_args " $opt" - ;; - --no-verbose) - opt_verbose=false -func_append preserve_args " $opt" - ;; - --silent|--quiet) - opt_silent=: -func_append preserve_args " $opt" - opt_verbose=false - ;; - --verbose|-v) - opt_verbose=: -func_append preserve_args " $opt" -opt_silent=false - ;; - --tag) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_tag="$optarg" -func_append preserve_args " $opt $optarg" -func_enable_tag "$optarg" - shift - ;; - - -\?|-h) func_usage ;; - --help) func_help ;; - --version) func_version ;; - - # Separate optargs to long options: - --*=*) - func_split_long_opt "$opt" - set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} - shift - ;; - - # Separate non-argument short options: - -\?*|-h*|-n*|-v*) - func_split_short_opt "$opt" - set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} - shift - ;; - - --) break ;; - -*) func_fatal_help "unrecognized option \`$opt'" ;; - *) set dummy "$opt" ${1+"$@"}; shift; break ;; - esac - done - # Validate options: +# libtool_parse_options [ARG]... +# --------------------------------- +# Provide handling for libtool specific options. +libtool_parse_options () +{ + $debug_cmd - # save first non-option argument - if test "$#" -gt 0; then - nonopt="$opt" - shift - fi + # Perform our own loop to consume as many options as possible in + # each iteration. + while test $# -gt 0; do + _G_opt=$1 + shift + case $_G_opt in + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + + --config) func_config ;; + + --dlopen|-dlopen) + opt_dlopen="${opt_dlopen+$opt_dlopen +}$1" + shift + ;; + + --preserve-dup-deps) + opt_preserve_dup_deps=: ;; + + --features) func_features ;; + + --finish) set dummy --mode finish ${1+"$@"}; shift ;; + + --help) opt_help=: ;; + + --help-all) opt_help=': help-all' ;; + + --mode) test $# = 0 && func_missing_arg $_G_opt && break + opt_mode=$1 + case $1 in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $_G_opt" + exit_cmd=exit + break + ;; + esac + shift + ;; + + --no-silent|--no-quiet) + opt_quiet=false + func_append preserve_args " $_G_opt" + ;; + + --no-warnings|--no-warning|--no-warn) + opt_warning=false + func_append preserve_args " $_G_opt" + ;; + + --no-verbose) + opt_verbose=false + func_append preserve_args " $_G_opt" + ;; + + --silent|--quiet) + opt_quiet=: + opt_verbose=false + func_append preserve_args " $_G_opt" + ;; + + --tag) test $# = 0 && func_missing_arg $_G_opt && break + opt_tag=$1 + func_append preserve_args " $_G_opt $1" + func_enable_tag "$1" + shift + ;; + + --verbose|-v) opt_quiet=false + opt_verbose=: + func_append preserve_args " $_G_opt" + ;; - # preserve --debug - test "$opt_debug" = : || func_append preserve_args " --debug" + # An option not handled by this hook function: + *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + esac + done - case $host in - *cygwin* | *mingw* | *pw32* | *cegcc*) - # don't eliminate duplications in $postdeps and $predeps - opt_duplicate_compiler_generated_deps=: - ;; - *) - opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps - ;; - esac - $opt_help || { - # Sanity checks first: - func_check_version_match + # save modified positional parameters for caller + func_quote_for_eval ${1+"$@"} + libtool_parse_options_result=$func_quote_for_eval_result +} +func_add_hook func_parse_options libtool_parse_options - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" - fi - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - # Only execute mode is allowed to have -dlopen flags. - if test -n "$opt_dlopen" && test "$opt_mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE +# libtool_validate_options [ARG]... +# --------------------------------- +# Perform any sanity checks on option settings and/or unconsumed +# arguments. +libtool_validate_options () +{ + # save first non-option argument + if test 0 -lt $#; then + nonopt=$1 + shift fi - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$progname --help --mode=$opt_mode' for more information." - } + # preserve --debug + test : = "$debug_cmd" || func_append preserve_args " --debug" + + case $host in + # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 + # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 + *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + $opt_help || { + # Sanity checks first: + func_check_version_match + + test yes != "$build_libtool_libs" \ + && test yes != "$build_old_libs" \ + && func_fatal_configuration "not configured to build any kind of library" + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test execute != "$opt_mode"; then + func_error "unrecognized option '-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help=$help + help="Try '$progname --help --mode=$opt_mode' for more information." + } - # Bail if the options were screwed - $exit_cmd $EXIT_FAILURE + # Pass back the unparsed argument list + func_quote_for_eval ${1+"$@"} + libtool_validate_options_result=$func_quote_for_eval_result } +func_add_hook func_validate_options libtool_validate_options + +# Process options as early as possible so that --help and --version +# can return quickly. +func_options ${1+"$@"} +eval set dummy "$func_options_result"; shift @@ -1224,24 +2468,52 @@ ## Main. ## ## ----------- ## +magic='%%%MAGIC variable%%%' +magic_exe='%%%MAGIC EXE variable%%%' + +# Global variables. +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# func_generated_by_libtool +# True iff stdin has been generated by Libtool. This function is only +# a basic sanity check; it will hardly flush out determined imposters. +func_generated_by_libtool_p () +{ + $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + # func_lalib_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. +# True iff FILE is a libtool '.la' library or '.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && - $SED -e 4q "$1" 2>/dev/null \ - | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 + $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p } # func_lalib_unsafe_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. +# True iff FILE is a libtool '.la' library or '.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be -# fatal anyway. Works if `file' does not exist. +# fatal anyway. Works if 'file' does not exist. func_lalib_unsafe_p () { lalib_p=no @@ -1249,13 +2521,13 @@ for lalib_p_l in 1 2 3 4 do read lalib_p_line - case "$lalib_p_line" in + case $lalib_p_line in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi - test "$lalib_p" = yes + test yes = "$lalib_p" } # func_ltwrapper_script_p file @@ -1264,7 +2536,8 @@ # determined imposters. func_ltwrapper_script_p () { - func_lalib_p "$1" + test -f "$1" && + $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p } # func_ltwrapper_executable_p file @@ -1289,7 +2562,7 @@ { func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper } # func_ltwrapper_p file @@ -1308,11 +2581,13 @@ # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { - $opt_debug + $debug_cmd + save_ifs=$IFS; IFS='~' for cmd in $1; do - IFS=$save_ifs + IFS=$sp$nl eval cmd=\"$cmd\" + IFS=$save_ifs func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs @@ -1324,10 +2599,11 @@ # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing -# `FILE.' does not work on cygwin managed mounts. +# 'FILE.' does not work on cygwin managed mounts. func_source () { - $opt_debug + $debug_cmd + case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; @@ -1354,10 +2630,10 @@ # store the result into func_replace_sysroot_result. func_replace_sysroot () { - case "$lt_sysroot:$1" in + case $lt_sysroot:$1 in ?*:"$lt_sysroot"*) func_stripname "$lt_sysroot" '' "$1" - func_replace_sysroot_result="=$func_stripname_result" + func_replace_sysroot_result='='$func_stripname_result ;; *) # Including no sysroot. @@ -1374,7 +2650,8 @@ # arg is usually of the form 'gcc ...' func_infer_tag () { - $opt_debug + $debug_cmd + if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do @@ -1393,7 +2670,7 @@ for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. @@ -1418,7 +2695,7 @@ # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" - func_fatal_error "specify a tag with \`--tag'" + func_fatal_error "specify a tag with '--tag'" # else # func_verbose "using $tagname tagged configuration" fi @@ -1434,15 +2711,15 @@ # but don't create it if we're doing a dry run. func_write_libtool_object () { - write_libobj=${1} - if test "$build_libtool_libs" = yes; then - write_lobj=\'${2}\' + write_libobj=$1 + if test yes = "$build_libtool_libs"; then + write_lobj=\'$2\' else write_lobj=none fi - if test "$build_old_libs" = yes; then - write_oldobj=\'${3}\' + if test yes = "$build_old_libs"; then + write_oldobj=\'$3\' else write_oldobj=none fi @@ -1450,7 +2727,7 @@ $opt_dry_run || { cat >${write_libobj}T </dev/null` - if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | - $SED -e "$lt_sed_naive_backslashify"` + $SED -e "$sed_naive_backslashify"` else func_convert_core_file_wine_to_w32_result= fi @@ -1514,18 +2792,19 @@ # are convertible, then the result may be empty. func_convert_core_path_wine_to_w32 () { - $opt_debug + $debug_cmd + # unfortunately, winepath doesn't convert paths, only file names - func_convert_core_path_wine_to_w32_result="" + func_convert_core_path_wine_to_w32_result= if test -n "$1"; then oldIFS=$IFS IFS=: for func_convert_core_path_wine_to_w32_f in $1; do IFS=$oldIFS func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" - if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -n "$func_convert_core_file_wine_to_w32_result"; then if test -z "$func_convert_core_path_wine_to_w32_result"; then - func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result else func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi @@ -1554,7 +2833,8 @@ # environment variable; do not put it in $PATH. func_cygpath () { - $opt_debug + $debug_cmd + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` if test "$?" -ne 0; then @@ -1563,7 +2843,7 @@ fi else func_cygpath_result= - func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'" fi } #end: func_cygpath @@ -1574,10 +2854,11 @@ # result in func_convert_core_msys_to_w32_result. func_convert_core_msys_to_w32 () { - $opt_debug + $debug_cmd + # awkward: cmd appends spaces to result func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | - $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` + $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"` } #end: func_convert_core_msys_to_w32 @@ -1588,13 +2869,14 @@ # func_to_host_file_result to ARG1). func_convert_file_check () { - $opt_debug - if test -z "$2" && test -n "$1" ; then + $debug_cmd + + if test -z "$2" && test -n "$1"; then func_error "Could not determine host file name corresponding to" - func_error " \`$1'" + func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: - func_to_host_file_result="$1" + func_to_host_file_result=$1 fi } # end func_convert_file_check @@ -1606,10 +2888,11 @@ # func_to_host_file_result to a simplistic fallback value (see below). func_convert_path_check () { - $opt_debug + $debug_cmd + if test -z "$4" && test -n "$3"; then func_error "Could not determine the host path corresponding to" - func_error " \`$3'" + func_error " '$3'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This is a deliberately simplistic "conversion" and # should not be "improved". See libtool.info. @@ -1618,7 +2901,7 @@ func_to_host_path_result=`echo "$3" | $SED -e "$lt_replace_pathsep_chars"` else - func_to_host_path_result="$3" + func_to_host_path_result=$3 fi fi } @@ -1630,9 +2913,10 @@ # and appending REPL if ORIG matches BACKPAT. func_convert_path_front_back_pathsep () { - $opt_debug + $debug_cmd + case $4 in - $1 ) func_to_host_path_result="$3$func_to_host_path_result" + $1 ) func_to_host_path_result=$3$func_to_host_path_result ;; esac case $4 in @@ -1646,7 +2930,7 @@ ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## -# invoked via `$to_host_file_cmd ARG' +# invoked via '$to_host_file_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # Result will be available in $func_to_host_file_result. @@ -1657,7 +2941,8 @@ # in func_to_host_file_result. func_to_host_file () { - $opt_debug + $debug_cmd + $to_host_file_cmd "$1" } # end func_to_host_file @@ -1669,7 +2954,8 @@ # in (the comma separated) LAZY, no conversion takes place. func_to_tool_file () { - $opt_debug + $debug_cmd + case ,$2, in *,"$to_tool_file_cmd",*) func_to_tool_file_result=$1 @@ -1687,7 +2973,7 @@ # Copy ARG to func_to_host_file_result. func_convert_file_noop () { - func_to_host_file_result="$1" + func_to_host_file_result=$1 } # end func_convert_file_noop @@ -1698,11 +2984,12 @@ # func_to_host_file_result. func_convert_file_msys_to_w32 () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" - func_to_host_file_result="$func_convert_core_msys_to_w32_result" + func_to_host_file_result=$func_convert_core_msys_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1714,8 +3001,9 @@ # func_to_host_file_result. func_convert_file_cygwin_to_w32 () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then # because $build is cygwin, we call "the" cygpath in $PATH; no need to use # LT_CYGPATH in this case. @@ -1731,11 +3019,12 @@ # and a working winepath. Returns result in func_to_host_file_result. func_convert_file_nix_to_w32 () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_file_wine_to_w32 "$1" - func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result=$func_convert_core_file_wine_to_w32_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1747,12 +3036,13 @@ # Returns result in func_to_host_file_result. func_convert_file_msys_to_cygwin () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then func_convert_core_msys_to_w32 "$1" func_cygpath -u "$func_convert_core_msys_to_w32_result" - func_to_host_file_result="$func_cygpath_result" + func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1765,13 +3055,14 @@ # in func_to_host_file_result. func_convert_file_nix_to_cygwin () { - $opt_debug - func_to_host_file_result="$1" + $debug_cmd + + func_to_host_file_result=$1 if test -n "$1"; then # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. func_convert_core_file_wine_to_w32 "$1" func_cygpath -u "$func_convert_core_file_wine_to_w32_result" - func_to_host_file_result="$func_cygpath_result" + func_to_host_file_result=$func_cygpath_result fi func_convert_file_check "$1" "$func_to_host_file_result" } @@ -1781,7 +3072,7 @@ ############################################# # $build to $host PATH CONVERSION FUNCTIONS # ############################################# -# invoked via `$to_host_path_cmd ARG' +# invoked via '$to_host_path_cmd ARG' # # In each case, ARG is the path to be converted from $build to $host format. # The result will be available in $func_to_host_path_result. @@ -1805,10 +3096,11 @@ to_host_path_cmd= func_init_to_host_path_cmd () { - $opt_debug + $debug_cmd + if test -z "$to_host_path_cmd"; then func_stripname 'func_convert_file_' '' "$to_host_file_cmd" - to_host_path_cmd="func_convert_path_${func_stripname_result}" + to_host_path_cmd=func_convert_path_$func_stripname_result fi } @@ -1818,7 +3110,8 @@ # in func_to_host_path_result. func_to_host_path () { - $opt_debug + $debug_cmd + func_init_to_host_path_cmd $to_host_path_cmd "$1" } @@ -1829,7 +3122,7 @@ # Copy ARG to func_to_host_path_result. func_convert_path_noop () { - func_to_host_path_result="$1" + func_to_host_path_result=$1 } # end func_convert_path_noop @@ -1840,8 +3133,9 @@ # func_to_host_path_result. func_convert_path_msys_to_w32 () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from ARG. MSYS # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; @@ -1849,7 +3143,7 @@ func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_to_host_path_result=$func_convert_core_msys_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" @@ -1863,8 +3157,9 @@ # func_to_host_file_result. func_convert_path_cygwin_to_w32 () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" @@ -1883,14 +3178,15 @@ # a working winepath. Returns result in func_to_host_file_result. func_convert_path_nix_to_w32 () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result=$func_convert_core_path_wine_to_w32_result func_convert_path_check : ";" \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" @@ -1904,15 +3200,16 @@ # Returns result in func_to_host_file_result. func_convert_path_msys_to_cygwin () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # See func_convert_path_msys_to_w32: func_stripname : : "$1" func_to_host_path_tmp1=$func_stripname_result func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_msys_to_w32_result" - func_to_host_path_result="$func_cygpath_result" + func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" @@ -1927,8 +3224,9 @@ # func_to_host_file_result. func_convert_path_nix_to_cygwin () { - $opt_debug - func_to_host_path_result="$1" + $debug_cmd + + func_to_host_path_result=$1 if test -n "$1"; then # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them @@ -1937,7 +3235,7 @@ func_to_host_path_tmp1=$func_stripname_result func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" - func_to_host_path_result="$func_cygpath_result" + func_to_host_path_result=$func_cygpath_result func_convert_path_check : : \ "$func_to_host_path_tmp1" "$func_to_host_path_result" func_convert_path_front_back_pathsep ":*" "*:" : "$1" @@ -1946,13 +3244,31 @@ # end func_convert_path_nix_to_cygwin +# func_dll_def_p FILE +# True iff FILE is a Windows DLL '.def' file. +# Keep in sync with _LT_DLL_DEF_P in libtool.m4 +func_dll_def_p () +{ + $debug_cmd + + func_dll_def_p_tmp=`$SED -n \ + -e 's/^[ ]*//' \ + -e '/^\(;.*\)*$/d' \ + -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \ + -e q \ + "$1"` + test DEF = "$func_dll_def_p_tmp" +} + + # func_mode_compile arg... func_mode_compile () { - $opt_debug + $debug_cmd + # Get the compilation command and the source file. base_compile= - srcfile="$nonopt" # always keep a non-empty value in "srcfile" + srcfile=$nonopt # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal @@ -1965,12 +3281,12 @@ case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile - lastarg="$arg" + lastarg=$arg arg_mode=normal ;; target ) - libobj="$arg" + libobj=$arg arg_mode=normal continue ;; @@ -1980,7 +3296,7 @@ case $arg in -o) test -n "$libobj" && \ - func_fatal_error "you cannot specify \`-o' more than once" + func_fatal_error "you cannot specify '-o' more than once" arg_mode=target continue ;; @@ -2009,12 +3325,12 @@ func_stripname '-Wc,' '' "$arg" args=$func_stripname_result lastarg= - save_ifs="$IFS"; IFS=',' + save_ifs=$IFS; IFS=, for arg in $args; do - IFS="$save_ifs" + IFS=$save_ifs func_append_quoted lastarg "$arg" done - IFS="$save_ifs" + IFS=$save_ifs func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result @@ -2027,8 +3343,8 @@ # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # - lastarg="$srcfile" - srcfile="$arg" + lastarg=$srcfile + srcfile=$arg ;; esac # case $arg ;; @@ -2043,13 +3359,13 @@ func_fatal_error "you must specify an argument for -Xcompile" ;; target) - func_fatal_error "you must specify a target with \`-o'" + func_fatal_error "you must specify a target with '-o'" ;; *) # Get the name of the library object. test -z "$libobj" && { func_basename "$srcfile" - libobj="$func_basename_result" + libobj=$func_basename_result } ;; esac @@ -2069,7 +3385,7 @@ case $libobj in *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) - func_fatal_error "cannot determine name of library object from \`$libobj'" + func_fatal_error "cannot determine name of library object from '$libobj'" ;; esac @@ -2078,8 +3394,8 @@ for arg in $later; do case $arg in -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" + test yes = "$build_libtool_libs" \ + || func_fatal_configuration "cannot build a shared library" build_old_libs=no continue ;; @@ -2105,17 +3421,17 @@ func_quote_for_eval "$libobj" test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && func_warning "libobj name \`$libobj' may not contain shell special characters." + && func_warning "libobj name '$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" - objname="$func_basename_result" - xdir="$func_dirname_result" - lobj=${xdir}$objdir/$objname + objname=$func_basename_result + xdir=$func_dirname_result + lobj=$xdir$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. - if test "$build_old_libs" = yes; then + if test yes = "$build_old_libs"; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" @@ -2127,16 +3443,16 @@ pic_mode=default ;; esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" + if test no = "$compiler_c_o"; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext + lockfile=$output_obj.lock else output_obj= need_locks=no @@ -2145,12 +3461,12 @@ # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then + if test yes = "$need_locks"; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done - elif test "$need_locks" = warn; then + elif test warn = "$need_locks"; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: @@ -2158,7 +3474,7 @@ This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you +your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." @@ -2180,11 +3496,11 @@ qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile - if test "$pic_mode" != no; then + if test no != "$pic_mode"; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code @@ -2201,7 +3517,7 @@ func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - if test "$need_locks" = warn && + if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: @@ -2212,7 +3528,7 @@ This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you +your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." @@ -2228,20 +3544,20 @@ fi # Allow error messages only from the first compilation. - if test "$suppress_opt" = yes; then + if test yes = "$suppress_opt"; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - if test "$pic_mode" != yes; then + if test yes = "$build_old_libs"; then + if test yes != "$pic_mode"; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi - if test "$compiler_c_o" = yes; then + if test yes = "$compiler_c_o"; then func_append command " -o $obj" fi @@ -2250,7 +3566,7 @@ func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - if test "$need_locks" = warn && + if test warn = "$need_locks" && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: @@ -2261,7 +3577,7 @@ This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you +your compiler does not support '-c' and '-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." @@ -2281,7 +3597,7 @@ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked - if test "$need_locks" != no; then + if test no != "$need_locks"; then removelist=$lockfile $RM "$lockfile" fi @@ -2291,7 +3607,7 @@ } $opt_help || { - test "$opt_mode" = compile && func_mode_compile ${1+"$@"} + test compile = "$opt_mode" && func_mode_compile ${1+"$@"} } func_mode_help () @@ -2311,7 +3627,7 @@ Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated @@ -2330,16 +3646,16 @@ -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to build PIC objects only -prefer-non-pic try to build non-PIC objects only - -shared do not build a \`.o' file suitable for static linking - -static only build a \`.o' file suitable for static linking + -shared do not build a '.o' file suitable for static linking + -static only build a '.o' file suitable for static linking -Wc,FLAG pass FLAG directly to the compiler -COMPILE-COMMAND is a command to be used in creating a \`standard' object file +COMPILE-COMMAND is a command to be used in creating a 'standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." +SOURCEFILE, then substituting the C source code suffix '.c' with the +library object suffix, '.lo'." ;; execute) @@ -2352,7 +3668,7 @@ -dlopen FILE add the directory containing FILE to the library path -This mode sets the library path environment variable according to \`-dlopen' +This mode sets the library path environment variable according to '-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated @@ -2371,7 +3687,7 @@ Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." +the '--dry-run' option if you just want to see what would be executed." ;; install) @@ -2381,7 +3697,7 @@ Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. +either the 'install' or 'cp' program. The following components of INSTALL-COMMAND are treated specially: @@ -2407,7 +3723,7 @@ -avoid-version do not add a version suffix if possible -bindir BINDIR specify path to binaries directory (for systems where libraries must be found in the PATH setting at runtime) - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE @@ -2421,7 +3737,8 @@ -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects + -objectlist FILE use a list of object files found in FILE to specify objects + -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes) -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information @@ -2441,20 +3758,20 @@ -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) -All other options (arguments beginning with \`-') are ignored. +All other options (arguments beginning with '-') are ignored. -Every other argument is treated as a filename. Files ending in \`.la' are +Every other argument is treated as a filename. Files ending in '.la' are treated as uninstalled libtool libraries, other files are standard or library object files. -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is +If the OUTPUT-FILE ends in '.la', then a libtool library is created, +only library objects ('.lo' files) may be specified, and '-rpath' is required, except when creating a convenience library. -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. +If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created +using 'ar' and 'ranlib', or on Windows using 'lib'. -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file is created, otherwise an executable program is created." ;; @@ -2465,7 +3782,7 @@ Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. @@ -2473,17 +3790,17 @@ ;; *) - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode '$opt_mode'" ;; esac echo - $ECHO "Try \`$progname --help' for more information about other modes." + $ECHO "Try '$progname --help' for more information about other modes." } # Now that we've collected a possible --mode arg, show help if necessary if $opt_help; then - if test "$opt_help" = :; then + if test : = "$opt_help"; then func_mode_help else { @@ -2491,7 +3808,7 @@ for opt_mode in compile link execute install finish uninstall clean; do func_mode_help done - } | sed -n '1p; 2,$s/^Usage:/ or: /p' + } | $SED -n '1p; 2,$s/^Usage:/ or: /p' { func_help noexit for opt_mode in compile link execute install finish uninstall clean; do @@ -2499,7 +3816,7 @@ func_mode_help done } | - sed '1d + $SED '1d /^When reporting/,/^Report/{ H d @@ -2516,16 +3833,17 @@ # func_mode_execute arg... func_mode_execute () { - $opt_debug + $debug_cmd + # The first argument is the command name. - cmd="$nonopt" + cmd=$nonopt test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $opt_dlopen; do test -f "$file" \ - || func_fatal_help "\`$file' is not a file" + || func_fatal_help "'$file' is not a file" dir= case $file in @@ -2535,7 +3853,7 @@ # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$lib' is not a valid libtool archive" + || func_fatal_help "'$lib' is not a valid libtool archive" # Read the libtool library. dlname= @@ -2546,18 +3864,18 @@ if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ - func_warning "\`$file' was not linked with \`-export-dynamic'" + func_warning "'$file' was not linked with '-export-dynamic'" continue fi func_dirname "$file" "" "." - dir="$func_dirname_result" + dir=$func_dirname_result if test -f "$dir/$objdir/$dlname"; then func_append dir "/$objdir" else if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'" fi fi ;; @@ -2565,18 +3883,18 @@ *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." - dir="$func_dirname_result" + dir=$func_dirname_result ;; *) - func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + func_warning "'-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" + test -n "$absdir" && dir=$absdir # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then @@ -2588,7 +3906,7 @@ # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. - libtool_execute_magic="$magic" + libtool_execute_magic=$magic # Check if any of the arguments is a wrapper script. args= @@ -2601,12 +3919,12 @@ if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. - file="$progdir/$program" + file=$progdir/$program elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. - file="$progdir/$program" + file=$progdir/$program fi ;; esac @@ -2614,7 +3932,15 @@ func_append_quoted args "$file" done - if test "X$opt_dry_run" = Xfalse; then + if $opt_dry_run; then + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + else if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" @@ -2631,25 +3957,18 @@ done # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - echo "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS + exec_cmd=\$cmd$args fi } -test "$opt_mode" = execute && func_mode_execute ${1+"$@"} +test execute = "$opt_mode" && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { - $opt_debug + $debug_cmd + libs= libdirs= admincmds= @@ -2663,11 +3982,11 @@ if func_lalib_unsafe_p "$opt"; then func_append libs " $opt" else - func_warning "\`$opt' is not a valid libtool archive" + func_warning "'$opt' is not a valid libtool archive" fi else - func_fatal_error "invalid argument \`$opt'" + func_fatal_error "invalid argument '$opt'" fi done @@ -2682,12 +4001,12 @@ # Remove sysroot references if $opt_dry_run; then for lib in $libs; do - echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + echo "removing references to $lt_sysroot and '=' prefixes from $lib" done else tmpdir=`func_mktempdir` for lib in $libs; do - sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ > $tmpdir/tmp-la mv -f $tmpdir/tmp-la $lib done @@ -2712,7 +4031,7 @@ fi # Exit here if they wanted silent mode. - $opt_silent && exit $EXIT_SUCCESS + $opt_quiet && exit $EXIT_SUCCESS if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then echo "----------------------------------------------------------------------" @@ -2723,27 +4042,27 @@ echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "specify the full pathname of the library, or use the '-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " - add LIBDIR to the '$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " - add LIBDIR to the '$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" - $ECHO " - use the \`$flag' linker flag" + $ECHO " - use the '$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'" fi echo @@ -2762,18 +4081,20 @@ exit $EXIT_SUCCESS } -test "$opt_mode" = finish && func_mode_finish ${1+"$@"} +test finish = "$opt_mode" && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { - $opt_debug + $debug_cmd + # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" || # Allow the use of GNU shtool's install command. - case $nonopt in *shtool*) :;; *) false;; esac; then + case $nonopt in *shtool*) :;; *) false;; esac + then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " @@ -2800,7 +4121,7 @@ opts= prev= install_type= - isdir=no + isdir=false stripme= no_mode=: for arg @@ -2813,7 +4134,7 @@ fi case $arg in - -d) isdir=yes ;; + -d) isdir=: ;; -f) if $install_cp; then :; else prev=$arg @@ -2831,7 +4152,7 @@ *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then - if test "x$prev" = x-m && test -n "$install_override_mode"; then + if test X-m = "X$prev" && test -n "$install_override_mode"; then arg2=$install_override_mode no_mode=false fi @@ -2856,7 +4177,7 @@ func_fatal_help "you must specify an install program" test -n "$prev" && \ - func_fatal_help "the \`$prev' option requires an argument" + func_fatal_help "the '$prev' option requires an argument" if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else @@ -2878,19 +4199,19 @@ dest=$func_stripname_result # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" + test -d "$dest" && isdir=: + if $isdir; then + destdir=$dest destname= else func_dirname_and_basename "$dest" "" "." - destdir="$func_dirname_result" - destname="$func_basename_result" + destdir=$func_dirname_result + destname=$func_basename_result # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ - func_fatal_help "\`$dest' is not a directory" + func_fatal_help "'$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; @@ -2899,7 +4220,7 @@ case $file in *.lo) ;; *) - func_fatal_help "\`$destdir' must be an absolute directory name" + func_fatal_help "'$destdir' must be an absolute directory name" ;; esac done @@ -2908,7 +4229,7 @@ # This variable tells wrapper scripts just to set variables rather # than running their programs. - libtool_install_magic="$magic" + libtool_install_magic=$magic staticlibs= future_libdirs= @@ -2928,7 +4249,7 @@ # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$file' is not a valid libtool archive" + || func_fatal_help "'$file' is not a valid libtool archive" library_names= old_library= @@ -2950,7 +4271,7 @@ fi func_dirname "$file" "/" "" - dir="$func_dirname_result" + dir=$func_dirname_result func_append dir "$objdir" if test -n "$relink_command"; then @@ -2964,7 +4285,7 @@ # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ - func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. @@ -2973,29 +4294,36 @@ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi - func_warning "relinking \`$file'" + func_warning "relinking '$file'" func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then - realname="$1" + realname=$1 shift - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T + srcname=$realname + test -n "$relink_command" && srcname=${realname}T # Install the shared library and build the symlinks. func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ 'exit $?' - tstripme="$stripme" + tstripme=$stripme case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) - tstripme="" + tstripme= + ;; + esac + ;; + os2*) + case $realname in + *_dll.a) + tstripme= ;; esac ;; @@ -3006,7 +4334,7 @@ if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on + # Try 'ln -sf' first, because the 'ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname @@ -3017,14 +4345,14 @@ fi # Do each command in the postinstall commands. - lib="$destdir/$realname" + lib=$destdir/$realname func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" - name="$func_basename_result" - instname="$dir/$name"i + name=$func_basename_result + instname=$dir/${name}i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. @@ -3036,11 +4364,11 @@ # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then - destfile="$destdir/$destname" + destfile=$destdir/$destname else func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" + destfile=$func_basename_result + destfile=$destdir/$destfile fi # Deduce the name of the destination old-style object file. @@ -3050,11 +4378,11 @@ staticdest=$func_lo2o_result ;; *.$objext) - staticdest="$destfile" + staticdest=$destfile destfile= ;; *) - func_fatal_help "cannot copy a libtool object to \`$destfile'" + func_fatal_help "cannot copy a libtool object to '$destfile'" ;; esac @@ -3063,7 +4391,7 @@ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. - if test "$build_old_libs" = yes; then + if test yes = "$build_old_libs"; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result @@ -3075,23 +4403,23 @@ *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then - destfile="$destdir/$destname" + destfile=$destdir/$destname else func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" + destfile=$func_basename_result + destfile=$destdir/$destfile fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install - stripped_ext="" + stripped_ext= case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result - stripped_ext=".exe" + stripped_ext=.exe fi ;; esac @@ -3119,19 +4447,19 @@ # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ - func_fatal_error "invalid libtool wrapper script \`$wrapper'" + func_fatal_error "invalid libtool wrapper script '$wrapper'" - finalize=yes + finalize=: for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi - libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'` if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "\`$lib' has not been installed in \`$libdir'" - finalize=no + func_warning "'$lib' has not been installed in '$libdir'" + finalize=false fi done @@ -3139,29 +4467,29 @@ func_source "$wrapper" outputname= - if test "$fast_install" = no && test -n "$relink_command"; then + if test no = "$fast_install" && test -n "$relink_command"; then $opt_dry_run || { - if test "$finalize" = yes; then + if $finalize; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" - file="$func_basename_result" - outputname="$tmpdir/$file" + file=$func_basename_result + outputname=$tmpdir/$file # Replace the output file specification. relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` - $opt_silent || { + $opt_quiet || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else - func_error "error: relink \`$file' with the above command before installing it" + func_error "error: relink '$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi - file="$outputname" + file=$outputname else - func_warning "cannot relink \`$file'" + func_warning "cannot relink '$file'" fi } else @@ -3198,10 +4526,10 @@ for file in $staticlibs; do func_basename "$file" - name="$func_basename_result" + name=$func_basename_result # Set up the ranlib parameters. - oldlib="$destdir/$name" + oldlib=$destdir/$name func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 tool_oldlib=$func_to_tool_file_result @@ -3216,18 +4544,18 @@ done test -n "$future_libdirs" && \ - func_warning "remember to run \`$progname --finish$future_libdirs'" + func_warning "remember to run '$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } -test "$opt_mode" = install && func_mode_install ${1+"$@"} +test install = "$opt_mode" && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p @@ -3235,16 +4563,17 @@ # a dlpreopen symbol table. func_generate_dlsyms () { - $opt_debug - my_outputname="$1" - my_originator="$2" - my_pic_p="${3-no}" - my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + $debug_cmd + + my_outputname=$1 + my_originator=$2 + my_pic_p=${3-false} + my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then if test -n "$NM" && test -n "$global_symbol_pipe"; then - my_dlsyms="${my_outputname}S.c" + my_dlsyms=${my_outputname}S.c else func_error "not configured to extract global symbols from dlpreopened files" fi @@ -3255,7 +4584,7 @@ "") ;; *.c) # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${my_outputname}.nm" + nlist=$output_objdir/$my_outputname.nm func_show_eval "$RM $nlist ${nlist}S ${nlist}T" @@ -3263,34 +4592,36 @@ func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ -/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ +/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif -#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) #pragma GCC diagnostic ignored \"-Wstrict-prototypes\" #endif /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */ # define LT_DLSYM_CONST -#elif defined(__osf__) +#elif defined __osf__ /* This system does not cope well with relocations in const data. */ # define LT_DLSYM_CONST #else # define LT_DLSYM_CONST const #endif +#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) + /* External symbol declarations for the compiler. */\ " - if test "$dlself" = yes; then - func_verbose "generating symbol list for \`$output'" + if test yes = "$dlself"; then + func_verbose "generating symbol list for '$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" @@ -3298,7 +4629,7 @@ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` for progfile in $progfiles; do func_to_tool_file "$progfile" func_convert_file_msys_to_w32 - func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + func_verbose "extracting global C symbols from '$func_to_tool_file_result'" $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done @@ -3318,10 +4649,10 @@ # Prepare the list of exported symbols if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" + export_symbols=$output_objdir/$outputname.exp $opt_dry_run || { $RM $export_symbols - eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' @@ -3331,7 +4662,7 @@ } else $opt_dry_run || { - eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in @@ -3345,22 +4676,22 @@ fi for dlprefile in $dlprefiles; do - func_verbose "extracting global C symbols from \`$dlprefile'" + func_verbose "extracting global C symbols from '$dlprefile'" func_basename "$dlprefile" - name="$func_basename_result" + name=$func_basename_result case $host in *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" eval "curr_lafile=\$libfile_$func_tr_sh_result" - dlprefile_dlbasename="" + dlprefile_dlbasename= if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then # Use subshell, to avoid clobbering current variable values dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` - if test -n "$dlprefile_dlname" ; then + if test -n "$dlprefile_dlname"; then func_basename "$dlprefile_dlname" - dlprefile_dlbasename="$func_basename_result" + dlprefile_dlbasename=$func_basename_result else # no lafile. user explicitly requested -dlpreopen . $sharedlib_from_linklib_cmd "$dlprefile" @@ -3368,7 +4699,7 @@ fi fi $opt_dry_run || { - if test -n "$dlprefile_dlbasename" ; then + if test -n "$dlprefile_dlbasename"; then eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' else func_warning "Could not compute DLL name from $name" @@ -3424,6 +4755,11 @@ echo '/* NONE */' >> "$output_objdir/$my_dlsyms" fi + func_show_eval '$RM "${nlist}I"' + if test -n "$global_symbol_to_import"; then + eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I' + fi + echo >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ @@ -3432,11 +4768,30 @@ void *address; } lt_dlsymlist; extern LT_DLSYM_CONST lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[]; +lt_${my_prefix}_LTX_preloaded_symbols[];\ +" + + if test -s "$nlist"I; then + echo >> "$output_objdir/$my_dlsyms" "\ +static void lt_syminit(void) +{ + LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols; + for (; symbol->name; ++symbol) + {" + $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms" + echo >> "$output_objdir/$my_dlsyms" "\ + } +}" + fi + echo >> "$output_objdir/$my_dlsyms" "\ LT_DLSYM_CONST lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = -{\ - { \"$my_originator\", (void *) 0 }," +{ {\"$my_originator\", (void *) 0}," + + if test -s "$nlist"I; then + echo >> "$output_objdir/$my_dlsyms" "\ + {\"@INIT@\", (void *) <_syminit}," + fi case $need_lib_prefix in no) @@ -3478,9 +4833,7 @@ *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) - if test "X$my_pic_p" != Xno; then - pic_flag_for_symtable=" $pic_flag" - fi + $my_pic_p && pic_flag_for_symtable=" $pic_flag" ;; esac ;; @@ -3497,10 +4850,10 @@ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. - func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"' # Transform the symbol file into the correct name. - symfileobj="$output_objdir/${my_outputname}S.$objext" + symfileobj=$output_objdir/${my_outputname}S.$objext case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then @@ -3518,7 +4871,7 @@ esac ;; *) - func_fatal_error "unknown suffix for \`$my_dlsyms'" + func_fatal_error "unknown suffix for '$my_dlsyms'" ;; esac else @@ -3532,6 +4885,32 @@ fi } +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $debug_cmd + + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $debug_cmd + + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + # func_win32_libid arg # return the library type of file 'arg' # @@ -3541,8 +4920,9 @@ # Despite the name, also deal with 64 bit binaries. func_win32_libid () { - $opt_debug - win32_libid_type="unknown" + $debug_cmd + + win32_libid_type=unknown win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import @@ -3552,16 +4932,29 @@ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then - func_to_tool_file "$1" func_convert_file_msys_to_w32 - win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | - $SED -n -e ' + case $nm_interface in + "MS dumpbin") + if func_cygming_ms_implib_p "$1" || + func_cygming_gnu_implib_p "$1" + then + win32_nmres=import + else + win32_nmres= + fi + ;; + *) + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' 1,100{ / I /{ - s,.*,import, + s|.*|import| p q } }'` + ;; + esac case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; @@ -3593,7 +4986,8 @@ # $sharedlib_from_linklib_result func_cygming_dll_for_implib () { - $opt_debug + $debug_cmd + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } @@ -3610,7 +5004,8 @@ # specified import library. func_cygming_dll_for_implib_fallback_core () { - $opt_debug + $debug_cmd + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` $OBJDUMP -s --section "$1" "$2" 2>/dev/null | $SED '/^Contents of section '"$match_literal"':/{ @@ -3646,8 +5041,8 @@ /./p' | # we now have a list, one entry per line, of the stringified # contents of the appropriate section of all members of the - # archive which possess that section. Heuristic: eliminate - # all those which have a first or second character that is + # archive that possess that section. Heuristic: eliminate + # all those that have a first or second character that is # a '.' (that is, objdump's representation of an unprintable # character.) This should work for all archives with less than # 0x302f exports -- but will fail for DLLs whose name actually @@ -3658,30 +5053,6 @@ $SED -e '/^\./d;/^.\./d;q' } -# func_cygming_gnu_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is a GNU/binutils-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_gnu_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` - test -n "$func_cygming_gnu_implib_tmp" -} - -# func_cygming_ms_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is an MS-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_ms_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` - test -n "$func_cygming_ms_implib_tmp" -} - # func_cygming_dll_for_implib_fallback ARG # Platform-specific function to extract the # name of the DLL associated with the specified @@ -3695,16 +5066,17 @@ # $sharedlib_from_linklib_result func_cygming_dll_for_implib_fallback () { - $opt_debug - if func_cygming_gnu_implib_p "$1" ; then + $debug_cmd + + if func_cygming_gnu_implib_p "$1"; then # binutils import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` - elif func_cygming_ms_implib_p "$1" ; then + elif func_cygming_ms_implib_p "$1"; then # ms-generated import library sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` else # unknown - sharedlib_from_linklib_result="" + sharedlib_from_linklib_result= fi } @@ -3712,10 +5084,11 @@ # func_extract_an_archive dir oldlib func_extract_an_archive () { - $opt_debug - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" - if test "$lock_old_archive_extraction" = yes; then + $debug_cmd + + f_ex_an_ar_dir=$1; shift + f_ex_an_ar_oldlib=$1 + if test yes = "$lock_old_archive_extraction"; then lockfile=$f_ex_an_ar_oldlib.lock until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" @@ -3724,7 +5097,7 @@ fi func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ 'stat=$?; rm -f "$lockfile"; exit $stat' - if test "$lock_old_archive_extraction" = yes; then + if test yes = "$lock_old_archive_extraction"; then $opt_dry_run || rm -f "$lockfile" fi if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then @@ -3738,22 +5111,23 @@ # func_extract_archives gentop oldlib ... func_extract_archives () { - $opt_debug - my_gentop="$1"; shift + $debug_cmd + + my_gentop=$1; shift my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" + my_oldobjs= + my_xlib= + my_xabs= + my_xdir= for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" - my_xlib="$func_basename_result" + my_xlib=$func_basename_result my_xlib_u=$my_xlib while :; do case " $extracted_archives " in @@ -3765,7 +5139,7 @@ esac done extracted_archives="$extracted_archives $my_xlib_u" - my_xdir="$my_gentop/$my_xlib_u" + my_xdir=$my_gentop/$my_xlib_u func_mkdir_p "$my_xdir" @@ -3778,22 +5152,23 @@ cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` - darwin_base_archive=`basename "$darwin_archive"` + func_basename "$darwin_archive" + darwin_base_archive=$func_basename_result darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" + for darwin_arch in $darwin_arches; do + func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch" + $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive" + cd "unfat-$$/$darwin_base_archive-$darwin_arch" + func_extract_an_archive "`pwd`" "$darwin_base_archive" cd "$darwin_curdir" - $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do @@ -3815,7 +5190,7 @@ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` done - func_extract_archives_result="$my_oldobjs" + func_extract_archives_result=$my_oldobjs } @@ -3830,7 +5205,7 @@ # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is +# will assume that the directory where it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () @@ -3841,7 +5216,7 @@ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# Generated by $PROGRAM (GNU $PACKAGE) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. @@ -3898,9 +5273,9 @@ # Very basic option parsing. These options are (a) specific to # the libtool wrapper, (b) are identical between the wrapper -# /script/ and the wrapper /executable/ which is used only on +# /script/ and the wrapper /executable/ that is used only on # windows platforms, and (c) all begin with the string "--lt-" -# (application programs are unlikely to have options which match +# (application programs are unlikely to have options that match # this pattern). # # There are only two supported options: --lt-debug and @@ -3933,7 +5308,7 @@ # Print the debug banner immediately: if test -n \"\$lt_option_debug\"; then - echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2 fi } @@ -3944,7 +5319,7 @@ lt_dump_args_N=1; for lt_arg do - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\" lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` done } @@ -3958,7 +5333,7 @@ *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} @@ -3968,7 +5343,7 @@ *) $ECHO "\ if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2 func_lt_dump_args \${1+\"\$@\"} 1>&2 fi exec \"\$progdir/\$program\" \${1+\"\$@\"} @@ -4043,13 +5418,13 @@ test -n \"\$absdir\" && thisdir=\"\$absdir\" " - if test "$fast_install" = yes; then + if test yes = "$fast_install"; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" @@ -4066,7 +5441,7 @@ if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else - $ECHO \"\$relink_command_output\" >&2 + \$ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi @@ -4101,7 +5476,7 @@ fi # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" @@ -4121,7 +5496,7 @@ fi else # The program doesn't exist. - \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 @@ -4140,7 +5515,7 @@ cat < #include +#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) + /* declarations of non-ANSI functions */ -#if defined(__MINGW32__) +#if defined __MINGW32__ # ifdef __STRICT_ANSI__ int _putenv (const char *); # endif -#elif defined(__CYGWIN__) +#elif defined __CYGWIN__ # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif -/* #elif defined (other platforms) ... */ +/* #elif defined other_platform || defined ... */ #endif /* portability defines, excluding path handling macros */ -#if defined(_MSC_VER) +#if defined _MSC_VER # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv # define S_IXUSR _S_IEXEC -# ifndef _INTPTR_T_DEFINED -# define _INTPTR_T_DEFINED -# define intptr_t int -# endif -#elif defined(__MINGW32__) +#elif defined __MINGW32__ # define setmode _setmode # define stat _stat # define chmod _chmod # define getcwd _getcwd # define putenv _putenv -#elif defined(__CYGWIN__) +#elif defined __CYGWIN__ # define HAVE_SETENV # define FOPEN_WB "wb" -/* #elif defined (other platforms) ... */ +/* #elif defined other platforms ... */ #endif -#if defined(PATH_MAX) +#if defined PATH_MAX # define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) +#elif defined MAXPATHLEN # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 @@ -4234,8 +5607,8 @@ # define PATH_SEPARATOR ':' #endif -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) +#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \ + defined __OS2__ # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 @@ -4268,10 +5641,10 @@ #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ + if (stale) { free (stale); stale = 0; } \ } while (0) -#if defined(LT_DEBUGWRAPPER) +#if defined LT_DEBUGWRAPPER static int lt_debug = 1; #else static int lt_debug = 0; @@ -4300,11 +5673,16 @@ EOF cat < 0) && IS_PATH_SEPARATOR (new_value[len-1])) + size_t len = strlen (new_value); + while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { - new_value[len-1] = '\0'; + new_value[--len] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); @@ -5082,27 +6460,47 @@ # True if ARG is an import lib, as indicated by $file_magic_cmd func_win32_import_lib_p () { - $opt_debug + $debug_cmd + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in *import*) : ;; *) false ;; esac } +# func_suncc_cstd_abi +# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!! +# Several compiler flags select an ABI that is incompatible with the +# Cstd library. Avoid specifying it if any are in CXXFLAGS. +func_suncc_cstd_abi () +{ + $debug_cmd + + case " $compile_command " in + *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*) + suncc_use_cstd_abi=no + ;; + *) + suncc_use_cstd_abi=yes + ;; + esac +} + # func_mode_link arg... func_mode_link () { - $opt_debug + $debug_cmd + case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out - # which system we are compiling for in order to pass an extra + # what system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll which has undefined symbols, in which case not + # to make a dll that has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. @@ -5146,10 +6544,11 @@ module=no no_install=no objs= + os2dllname= non_pic_objects= precious_files_regex= prefer_static_libs=no - preload=no + preload=false prev= prevarg= release= @@ -5161,7 +6560,7 @@ vinfo= vinfo_number=no weak_libs= - single_module="${wl}-single_module" + single_module=$wl-single_module func_infer_tag $base_compile # We need to know -static, to get the right output filenames. @@ -5169,15 +6568,15 @@ do case $arg in -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" + test yes != "$build_libtool_libs" \ + && func_fatal_configuration "cannot build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) - if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then @@ -5210,7 +6609,7 @@ # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do - arg="$1" + arg=$1 shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result @@ -5227,21 +6626,21 @@ case $prev in bindir) - bindir="$arg" + bindir=$arg prev= continue ;; dlfiles|dlprefiles) - if test "$preload" = no; then + $preload || { # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" - preload=yes - fi + preload=: + } case $arg in *.la | *.lo) ;; # We handle these cases below. force) - if test "$dlself" = no; then + if test no = "$dlself"; then dlself=needless export_dynamic=yes fi @@ -5249,9 +6648,9 @@ continue ;; self) - if test "$prev" = dlprefiles; then + if test dlprefiles = "$prev"; then dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then dlself=yes else dlself=needless @@ -5261,7 +6660,7 @@ continue ;; *) - if test "$prev" = dlfiles; then + if test dlfiles = "$prev"; then func_append dlfiles " $arg" else func_append dlprefiles " $arg" @@ -5272,14 +6671,14 @@ esac ;; expsyms) - export_symbols="$arg" + export_symbols=$arg test -f "$arg" \ - || func_fatal_error "symbol file \`$arg' does not exist" + || func_fatal_error "symbol file '$arg' does not exist" prev= continue ;; expsyms_regex) - export_symbols_regex="$arg" + export_symbols_regex=$arg prev= continue ;; @@ -5297,7 +6696,13 @@ continue ;; inst_prefix) - inst_prefix_dir="$arg" + inst_prefix_dir=$arg + prev= + continue + ;; + mllvm) + # Clang does not use LLVM to link, so we can simply discard any + # '-mllvm $arg' options when doing the link step. prev= continue ;; @@ -5321,21 +6726,21 @@ if test -z "$pic_object" || test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" + test none = "$pic_object" && + test none = "$non_pic_object"; then + func_fatal_error "cannot find name of object for '$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result - if test "$pic_object" != none; then + if test none != "$pic_object"; then # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" + pic_object=$xdir$pic_object - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + if test dlfiles = "$prev"; then + if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then func_append dlfiles " $pic_object" prev= continue @@ -5346,7 +6751,7 @@ fi # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then + if test dlprefiles = "$prev"; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= @@ -5354,23 +6759,23 @@ # A PIC object. func_append libobjs " $pic_object" - arg="$pic_object" + arg=$pic_object fi # Non-PIC object. - if test "$non_pic_object" != none; then + if test none != "$non_pic_object"; then # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" + non_pic_object=$xdir$non_pic_object # A standard non-PIC object func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" + if test -z "$pic_object" || test none = "$pic_object"; then + arg=$non_pic_object fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" + non_pic_object=$pic_object func_append non_pic_objects " $non_pic_object" fi else @@ -5378,7 +6783,7 @@ if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result @@ -5386,24 +6791,29 @@ func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else - func_fatal_error "\`$arg' is not a valid libtool object" + func_fatal_error "'$arg' is not a valid libtool object" fi fi done else - func_fatal_error "link input file \`$arg' does not exist" + func_fatal_error "link input file '$arg' does not exist" fi arg=$save_arg prev= continue ;; + os2dllname) + os2dllname=$arg + prev= + continue + ;; precious_regex) - precious_files_regex="$arg" + precious_files_regex=$arg prev= continue ;; release) - release="-$arg" + release=-$arg prev= continue ;; @@ -5415,7 +6825,7 @@ func_fatal_error "only absolute run-paths are allowed" ;; esac - if test "$prev" = rpath; then + if test rpath = "$prev"; then case "$rpath " in *" $arg "*) ;; *) func_append rpath " $arg" ;; @@ -5430,7 +6840,7 @@ continue ;; shrext) - shrext_cmds="$arg" + shrext_cmds=$arg prev= continue ;; @@ -5470,7 +6880,7 @@ esac fi # test -n "$prev" - prevarg="$arg" + prevarg=$arg case $arg in -all-static) @@ -5484,7 +6894,7 @@ -allow-undefined) # FIXME: remove this flag sometime in the future. - func_fatal_error "\`-allow-undefined' must not be used because it is the default" + func_fatal_error "'-allow-undefined' must not be used because it is the default" ;; -avoid-version) @@ -5516,7 +6926,7 @@ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi - if test "X$arg" = "X-export-symbols"; then + if test X-export-symbols = "X$arg"; then prev=expsyms else prev=expsyms_regex @@ -5550,9 +6960,9 @@ func_stripname "-L" '' "$arg" if test -z "$func_stripname_result"; then if test "$#" -gt 0; then - func_fatal_error "require no space between \`-L' and \`$1'" + func_fatal_error "require no space between '-L' and '$1'" else - func_fatal_error "need path for \`-L' option" + func_fatal_error "need path for '-L' option" fi fi func_resolve_sysroot "$func_stripname_result" @@ -5563,8 +6973,8 @@ *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ - func_fatal_error "cannot determine absolute directory name of \`$dir'" - dir="$absdir" + func_fatal_error "cannot determine absolute directory name of '$dir'" + dir=$absdir ;; esac case "$deplibs " in @@ -5599,7 +7009,7 @@ ;; -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + if test X-lc = "X$arg" || test X-lm = "X$arg"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) @@ -5607,11 +7017,11 @@ ;; *-*-os2*) # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework @@ -5620,16 +7030,16 @@ ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work - test "X$arg" = "X-lc" && continue + test X-lc = "X$arg" && continue ;; esac - elif test "X$arg" = "X-lc_r"; then + elif test X-lc_r = "X$arg"; then case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc_r directly, use -pthread flag. continue ;; @@ -5639,6 +7049,11 @@ continue ;; + -mllvm) + prev=mllvm + continue + ;; + -module) module=yes continue @@ -5668,7 +7083,7 @@ ;; -multi_module) - single_module="${wl}-multi_module" + single_module=$wl-multi_module continue ;; @@ -5682,8 +7097,8 @@ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. - func_warning "\`-no-install' is ignored for $host" - func_warning "assuming \`-no-fast-install' instead" + func_warning "'-no-install' is ignored for $host" + func_warning "assuming '-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; @@ -5701,6 +7116,11 @@ continue ;; + -os2dllname) + prev=os2dllname + continue + ;; + -o) prev=output ;; -precious-files-regex) @@ -5788,14 +7208,14 @@ func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= - save_ifs="$IFS"; IFS=',' + save_ifs=$IFS; IFS=, for flag in $args; do - IFS="$save_ifs" + IFS=$save_ifs func_quote_for_eval "$flag" func_append arg " $func_quote_for_eval_result" func_append compiler_flags " $func_quote_for_eval_result" done - IFS="$save_ifs" + IFS=$save_ifs func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; @@ -5804,15 +7224,15 @@ func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= - save_ifs="$IFS"; IFS=',' + save_ifs=$IFS; IFS=, for flag in $args; do - IFS="$save_ifs" + IFS=$save_ifs func_quote_for_eval "$flag" func_append arg " $wl$func_quote_for_eval_result" func_append compiler_flags " $wl$func_quote_for_eval_result" func_append linker_flags " $func_quote_for_eval_result" done - IFS="$save_ifs" + IFS=$save_ifs func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; @@ -5835,7 +7255,7 @@ # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result ;; # Flags to be passed through unchanged, with rationale: @@ -5847,25 +7267,49 @@ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC # -F/path path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # -fstack-protector* stack protector flags for GCC # @file GCC response files # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support - # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -specs=* GCC specs files + # -stdlib=* select c++ std lib with clang + # -fsanitize=* Clang/GCC memory and address sanitizer -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \ + -specs=*|-fsanitize=*) func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" continue ;; + -Z*) + if test os2 = "`expr $host : '.*\(os2\)'`"; then + # OS/2 uses -Zxxx to specify OS/2-specific options + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case $arg in + -Zlinker | -Zstack) + prev=xcompiler + ;; + esac + continue + else + # Otherwise treat like 'Some other compiler flag' below + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result + fi + ;; + # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result ;; *.$objext) @@ -5886,21 +7330,21 @@ if test -z "$pic_object" || test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" + test none = "$pic_object" && + test none = "$non_pic_object"; then + func_fatal_error "cannot find name of object for '$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result - if test "$pic_object" != none; then + test none = "$pic_object" || { # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" + pic_object=$xdir$pic_object - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + if test dlfiles = "$prev"; then + if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then func_append dlfiles " $pic_object" prev= continue @@ -5911,7 +7355,7 @@ fi # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then + if test dlprefiles = "$prev"; then # Preload the old-style object. func_append dlprefiles " $pic_object" prev= @@ -5919,23 +7363,23 @@ # A PIC object. func_append libobjs " $pic_object" - arg="$pic_object" - fi + arg=$pic_object + } # Non-PIC object. - if test "$non_pic_object" != none; then + if test none != "$non_pic_object"; then # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" + non_pic_object=$xdir$non_pic_object # A standard non-PIC object func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" + if test -z "$pic_object" || test none = "$pic_object"; then + arg=$non_pic_object fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" + non_pic_object=$pic_object func_append non_pic_objects " $non_pic_object" fi else @@ -5943,7 +7387,7 @@ if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=$func_dirname_result func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result @@ -5951,7 +7395,7 @@ func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else - func_fatal_error "\`$arg' is not a valid libtool object" + func_fatal_error "'$arg' is not a valid libtool object" fi fi ;; @@ -5967,11 +7411,11 @@ # A libtool-controlled library. func_resolve_sysroot "$arg" - if test "$prev" = dlfiles; then + if test dlfiles = "$prev"; then # This library was specified with -dlopen. func_append dlfiles " $func_resolve_sysroot_result" prev= - elif test "$prev" = dlprefiles; then + elif test dlprefiles = "$prev"; then # The library was specified with -dlpreopen. func_append dlprefiles " $func_resolve_sysroot_result" prev= @@ -5986,7 +7430,7 @@ # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=$func_quote_for_eval_result ;; esac # arg @@ -5998,9 +7442,9 @@ done # argument parsing loop test -n "$prev" && \ - func_fatal_help "the \`$prevarg' option requires an argument" + func_fatal_help "the '$prevarg' option requires an argument" - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" @@ -6009,20 +7453,23 @@ oldlibs= # calculate the name of the file, without its directory func_basename "$output" - outputname="$func_basename_result" - libobjs_save="$libobjs" + outputname=$func_basename_result + libobjs_save=$libobjs if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + # Definition is injected by LT_CONFIG during libtool generation. + func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH" + func_dirname "$output" "/" "" - output_objdir="$func_dirname_result$objdir" + output_objdir=$func_dirname_result$objdir func_to_tool_file "$output_objdir/" tool_output_objdir=$func_to_tool_file_result # Create the object directory. @@ -6045,7 +7492,7 @@ # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac @@ -6053,7 +7500,7 @@ func_append libs " $deplib" done - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps @@ -6085,7 +7532,7 @@ case $file in *.la) ;; *) - func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + func_fatal_help "libraries can '-dlopen' only libtool libraries: $file" ;; esac done @@ -6093,7 +7540,7 @@ prog) compile_deplibs= finalize_deplibs= - alldeplibs=no + alldeplibs=false newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" @@ -6105,32 +7552,32 @@ for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... - if test "$linkmode,$pass" = "lib,link"; then + if test lib,link = "$linkmode,$pass"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done - deplibs="$tmp_deplibs" + deplibs=$tmp_deplibs fi - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" + if test lib,link = "$linkmode,$pass" || + test prog,scan = "$linkmode,$pass"; then + libs=$deplibs deplibs= fi - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; + dlopen) libs=$dlfiles ;; + dlpreopen) libs=$dlprefiles ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi - if test "$linkmode,$pass" = "lib,dlpreopen"; then + if test lib,dlpreopen = "$linkmode,$pass"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs @@ -6151,26 +7598,26 @@ esac done done - libs="$dlprefiles" + libs=$dlprefiles fi - if test "$pass" = dlopen; then + if test dlopen = "$pass"; then # Collect dlpreopened libraries - save_deplibs="$deplibs" + save_deplibs=$deplibs deplibs= fi for deplib in $libs; do lib= - found=no + found=false case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else func_append compiler_flags " $deplib" - if test "$linkmode" = lib ; then + if test lib = "$linkmode"; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; @@ -6180,13 +7627,13 @@ continue ;; -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - func_warning "\`-l' is ignored for archives/objects" + if test lib != "$linkmode" && test prog != "$linkmode"; then + func_warning "'-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" @@ -6194,31 +7641,22 @@ for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library - lib="$searchdir/lib${name}${search_ext}" + lib=$searchdir/lib$name$search_ext if test -f "$lib"; then - if test "$search_ext" = ".la"; then - found=yes + if test .la = "$search_ext"; then + found=: else - found=no + found=false fi break 2 fi done done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - else # deplib is a libtool library + if $found; then + # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then @@ -6226,19 +7664,19 @@ old_library= func_source "$lib" for l in $old_library $library_names; do - ll="$l" + ll=$l done - if test "X$ll" = "X$old_library" ; then # only static version available - found=no + if test "X$ll" = "X$old_library"; then # only static version available + found=false func_dirname "$lib" "" "." - ladir="$func_dirname_result" + ladir=$func_dirname_result lib=$ladir/$old_library - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" fi continue fi @@ -6247,15 +7685,25 @@ *) ;; esac fi + else + # deplib doesn't seem to be a libtool library + if test prog,link = "$linkmode,$pass"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" + fi + continue fi ;; # -l *.ltframework) - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" - if test "$linkmode" = lib ; then + if test lib = "$linkmode"; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) func_append new_inherited_linker_flags " $deplib" ;; @@ -6268,18 +7716,18 @@ case $linkmode in lib) deplibs="$deplib $deplibs" - test "$pass" = conv && continue + test conv = "$pass" && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" func_resolve_sysroot "$func_stripname_result" func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) - if test "$pass" = conv; then + if test conv = "$pass"; then deplibs="$deplib $deplibs" continue fi - if test "$pass" = scan; then + if test scan = "$pass"; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" @@ -6290,13 +7738,13 @@ func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) - func_warning "\`-L' is ignored for archives/objects" + func_warning "'-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) - if test "$pass" = link; then + if test link = "$pass"; then func_stripname '-R' '' "$deplib" func_resolve_sysroot "$func_stripname_result" dir=$func_resolve_sysroot_result @@ -6314,7 +7762,7 @@ lib=$func_resolve_sysroot_result ;; *.$libext) - if test "$pass" = conv; then + if test conv = "$pass"; then deplibs="$deplib $deplibs" continue fi @@ -6325,21 +7773,26 @@ case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) - valid_a_lib=no + valid_a_lib=false case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes + valid_a_lib=: fi ;; pass_all) - valid_a_lib=yes + valid_a_lib=: ;; esac - if test "$valid_a_lib" != yes; then + if $valid_a_lib; then + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + else echo $ECHO "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" @@ -6347,18 +7800,13 @@ echo "*** shared version of the library, which you do not appear to have" echo "*** because the file extensions .$libext of this argument makes me believe" echo "*** that it is just a static archive that I should not use here." - else - echo - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) - if test "$pass" != link; then + if test link != "$pass"; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" @@ -6369,10 +7817,10 @@ esac # linkmode ;; # *.$libext *.lo | *.$objext) - if test "$pass" = conv; then + if test conv = "$pass"; then deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + elif test prog = "$linkmode"; then + if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then # If there is no dlopen support or we're linking statically, # we need to preload. func_append newdlprefiles " $deplib" @@ -6385,22 +7833,20 @@ continue ;; %DEPLIBS%) - alldeplibs=yes + alldeplibs=: continue ;; esac # case $deplib - if test "$found" = yes || test -f "$lib"; then : - else - func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" - fi + $found || test -f "$lib" \ + || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'" # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ - || func_fatal_error "\`$lib' is not a valid libtool archive" + || func_fatal_error "'$lib' is not a valid libtool archive" func_dirname "$lib" "" "." - ladir="$func_dirname_result" + ladir=$func_dirname_result dlname= dlopen= @@ -6430,19 +7876,19 @@ done fi dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then + if test lib,link = "$linkmode,$pass" || + test prog,scan = "$linkmode,$pass" || + { test prog != "$linkmode" && test lib != "$linkmode"; }; then test -n "$dlopen" && func_append dlfiles " $dlopen" test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi - if test "$pass" = conv; then + if test conv = "$pass"; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then - func_fatal_error "cannot find name of link library for \`$lib'" + func_fatal_error "cannot find name of link library for '$lib'" fi # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" @@ -6450,15 +7896,15 @@ tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi func_append tmp_libs " $deplib" done - elif test "$linkmode" != prog && test "$linkmode" != lib; then - func_fatal_error "\`$lib' is not a convenience library" + elif test prog != "$linkmode" && test lib != "$linkmode"; then + func_fatal_error "'$lib' is not a convenience library" fi continue fi # $pass = conv @@ -6467,26 +7913,26 @@ # Get the name of the library we link against. linklib= if test -n "$old_library" && - { test "$prefer_static_libs" = yes || - test "$prefer_static_libs,$installed" = "built,no"; }; then + { test yes = "$prefer_static_libs" || + test built,no = "$prefer_static_libs,$installed"; }; then linklib=$old_library else for l in $old_library $library_names; do - linklib="$l" + linklib=$l done fi if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for \`$lib'" + func_fatal_error "cannot find name of link library for '$lib'" fi # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - func_fatal_error "cannot -dlopen a convenience library: \`$lib'" - fi + if test dlopen = "$pass"; then + test -z "$libdir" \ + && func_fatal_error "cannot -dlopen a convenience library: '$lib'" if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then + test yes != "$dlopen_support" || + test no = "$build_libtool_libs" + then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't @@ -6500,40 +7946,40 @@ # We need an absolute path. case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then - func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "cannot determine absolute directory name of '$ladir'" func_warning "passing it literally to the linker, although it might fail" - abs_ladir="$ladir" + abs_ladir=$ladir fi ;; esac func_basename "$lib" - laname="$func_basename_result" + laname=$func_basename_result # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then + if test yes = "$installed"; then if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library \`$lib' was moved." - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" + func_warning "library '$lib' was moved." + dir=$ladir + absdir=$abs_ladir + libdir=$abs_ladir else - dir="$lt_sysroot$libdir" - absdir="$lt_sysroot$libdir" + dir=$lt_sysroot$libdir + absdir=$lt_sysroot$libdir fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + test yes = "$hardcode_automatic" && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" + dir=$ladir + absdir=$abs_ladir # Remove this search path later func_append notinst_path " $abs_ladir" else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" + dir=$ladir/$objdir + absdir=$abs_ladir/$objdir # Remove this search path later func_append notinst_path " $abs_ladir" fi @@ -6542,11 +7988,11 @@ name=$func_stripname_result # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir" && test "$linkmode" = prog; then - func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + if test dlpreopen = "$pass"; then + if test -z "$libdir" && test prog = "$linkmode"; then + func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'" fi - case "$host" in + case $host in # special handling for platforms with PE-DLLs. *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both @@ -6590,9 +8036,9 @@ if test -z "$libdir"; then # Link the convenience library - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then + elif test prog,link = "$linkmode,$pass"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else @@ -6602,14 +8048,14 @@ fi - if test "$linkmode" = prog && test "$pass" != link; then + if test prog = "$linkmode" && test link != "$pass"; then func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes + linkalldeplibs=false + if test no != "$link_all_deplibs" || test -z "$library_names" || + test no = "$build_libtool_libs"; then + linkalldeplibs=: fi tmp_libs= @@ -6621,14 +8067,14 @@ ;; esac # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then + if $linkalldeplibs; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac @@ -6638,15 +8084,15 @@ continue fi # $linkmode = prog... - if test "$linkmode,$pass" = "prog,link"; then + if test prog,link = "$linkmode,$pass"; then if test -n "$library_names" && - { { test "$prefer_static_libs" = no || - test "$prefer_static_libs,$installed" = "built,yes"; } || + { { test no = "$prefer_static_libs" || + test built,yes = "$prefer_static_libs,$installed"; } || test -z "$old_library"; }; then # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then # Make sure the rpath contains only unique directories. - case "$temp_rpath:" in + case $temp_rpath: in *"$absdir:"*) ;; *) func_append temp_rpath "$absdir:" ;; esac @@ -6675,9 +8121,9 @@ esac fi # $linkmode,$pass = prog,link... - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && + if $alldeplibs && + { test pass_all = "$deplibs_check_method" || + { test yes = "$build_libtool_libs" && test -n "$library_names"; }; }; then # We only need to search for static libraries continue @@ -6686,19 +8132,19 @@ link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes; then + if test built = "$use_static_libs" && test yes = "$installed"; then use_static_libs=no fi if test -n "$library_names" && - { test "$use_static_libs" = no || test -z "$old_library"; }; then + { test no = "$use_static_libs" || test -z "$old_library"; }; then case $host in - *cygwin* | *mingw* | *cegcc*) + *cygwin* | *mingw* | *cegcc* | *os2*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no ;; *) - if test "$installed" = no; then + if test no = "$installed"; then func_append notinst_deplibs " $lib" need_relink=yes fi @@ -6708,24 +8154,24 @@ # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! - dlopenmodule="" + dlopenmodule= for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then - dlopenmodule="$dlpremoduletest" + dlopenmodule=$dlpremoduletest break fi done - if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then echo - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then + if test lib = "$linkmode" && + test yes = "$hardcode_into_libs"; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. @@ -6753,43 +8199,43 @@ # figure out the soname set dummy $library_names shift - realname="$1" + realname=$1 shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then - soname="$dlname" + soname=$dlname elif test -n "$soname_spec"; then # bleh windows case $host in - *cygwin* | mingw* | *cegcc*) + *cygwin* | mingw* | *cegcc* | *os2*) func_arith $current - $age major=$func_arith_result - versuffix="-$major" + versuffix=-$major ;; esac eval soname=\"$soname_spec\" else - soname="$realname" + soname=$realname fi # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" + soroot=$soname func_basename "$soroot" - soname="$func_basename_result" + soname=$func_basename_result func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else - func_verbose "extracting exported symbol list from \`$soname'" + func_verbose "extracting exported symbol list from '$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else - func_verbose "generating import library for \`$soname'" + func_verbose "generating import library for '$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library @@ -6797,58 +8243,58 @@ linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" - if test "$linkmode" = prog || test "$opt_mode" != relink; then + if test prog = "$linkmode" || test relink != "$opt_mode"; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" + if test no = "$hardcode_direct"; then + add=$dir/$linklib case $host in - *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; - *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;; + *-*-sysv4*uw2*) add_dir=-L$dir ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir="-L$dir" ;; + *-*-unixware7*) add_dir=-L$dir ;; *-*-darwin* ) - # if the lib is a (non-dlopened) module then we can not + # if the lib is a (non-dlopened) module then we cannot # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | - $GREP ": [^:]* bundle" >/dev/null ; then + $GREP ": [^:]* bundle" >/dev/null; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then + if test -z "$old_library"; then echo echo "*** And there doesn't seem to be a static archive available" echo "*** The link will probably fail, sorry" else - add="$dir/$old_library" + add=$dir/$old_library fi elif test -n "$old_library"; then - add="$dir/$old_library" + add=$dir/$old_library fi fi esac - elif test "$hardcode_minus_L" = no; then + elif test no = "$hardcode_minus_L"; then case $host in - *-*-sunos*) add_shlibpath="$dir" ;; + *-*-sunos*) add_shlibpath=$dir ;; esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" + add_dir=-L$dir + add=-l$name + elif test no = "$hardcode_shlibpath_var"; then + add_shlibpath=$dir + add=-l$name else lib_linked=no fi ;; relink) - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$absdir" + if test yes = "$hardcode_direct" && + test no = "$hardcode_direct_absolute"; then + add=$dir/$linklib + elif test yes = "$hardcode_minus_L"; then + add_dir=-L$absdir # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in @@ -6857,10 +8303,10 @@ ;; esac fi - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" + add=-l$name + elif test yes = "$hardcode_shlibpath_var"; then + add_shlibpath=$dir + add=-l$name else lib_linked=no fi @@ -6868,7 +8314,7 @@ *) lib_linked=no ;; esac - if test "$lib_linked" != yes; then + if test yes != "$lib_linked"; then func_fatal_configuration "unsupported hardcode properties" fi @@ -6878,15 +8324,15 @@ *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && - test "$hardcode_minus_L" != yes && - test "$hardcode_shlibpath_var" = yes; then + if test yes != "$hardcode_direct" && + test yes != "$hardcode_minus_L" && + test yes = "$hardcode_shlibpath_var"; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; @@ -6895,33 +8341,33 @@ fi fi - if test "$linkmode" = prog || test "$opt_mode" = relink; then + if test prog = "$linkmode" || test relink = "$opt_mode"; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then + if test yes = "$hardcode_direct" && + test no = "$hardcode_direct_absolute"; then + add=$libdir/$linklib + elif test yes = "$hardcode_minus_L"; then + add_dir=-L$libdir + add=-l$name + elif test yes = "$hardcode_shlibpath_var"; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) func_append finalize_shlibpath "$libdir:" ;; esac - add="-l$name" - elif test "$hardcode_automatic" = yes; then + add=-l$name + elif test yes = "$hardcode_automatic"; then if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" + test -f "$inst_prefix_dir$libdir/$linklib"; then + add=$inst_prefix_dir$libdir/$linklib else - add="$libdir/$linklib" + add=$libdir/$linklib fi else # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" + add_dir=-L$libdir # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in @@ -6930,10 +8376,10 @@ ;; esac fi - add="-l$name" + add=-l$name fi - if test "$linkmode" = prog; then + if test prog = "$linkmode"; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else @@ -6941,43 +8387,43 @@ test -n "$add" && deplibs="$add $deplibs" fi fi - elif test "$linkmode" = prog; then + elif test prog = "$linkmode"; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" + if test unsupported != "$hardcode_direct"; then + test -n "$old_library" && linklib=$old_library compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi - elif test "$build_libtool_libs" = yes; then + elif test yes = "$build_libtool_libs"; then # Not a shared library - if test "$deplibs_check_method" != pass_all; then + if test pass_all != "$deplibs_check_method"; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo - $ECHO "*** Warning: This system can not link to static lib archive $lib." + $ECHO "*** Warning: This system cannot link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then + if test yes = "$module"; then echo "*** But as you try to build a module library, libtool will still create " echo "*** a static module, that should work as long as the dlopening application" echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + echo "*** 'nm' from GNU binutils and a full rebuild may help." fi - if test "$build_old_libs" = no; then + if test no = "$build_old_libs"; then build_libtool_libs=module build_old_libs=yes else @@ -6990,11 +8436,11 @@ fi fi # link shared/static library? - if test "$linkmode" = lib; then + if test lib = "$linkmode"; then if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || - test "$link_static" = yes; }; then + { test yes != "$hardcode_into_libs" || + test yes = "$build_old_libs" || + test yes = "$link_static"; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do @@ -7008,12 +8454,12 @@ *) func_append temp_deplibs " $libdir";; esac done - dependency_libs="$temp_deplibs" + dependency_libs=$temp_deplibs fi func_append newlib_search_path " $absdir" # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do @@ -7023,7 +8469,7 @@ func_resolve_sysroot "$func_stripname_result";; *) func_resolve_sysroot "$deplib" ;; esac - if $opt_preserve_dup_deps ; then + if $opt_preserve_dup_deps; then case "$tmp_libs " in *" $func_resolve_sysroot_result "*) func_append specialdeplibs " $func_resolve_sysroot_result" ;; @@ -7032,12 +8478,12 @@ func_append tmp_libs " $func_resolve_sysroot_result" done - if test "$link_all_deplibs" != no; then + if test no != "$link_all_deplibs"; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in - -L*) path="$deplib" ;; + -L*) path=$deplib ;; *.la) func_resolve_sysroot "$deplib" deplib=$func_resolve_sysroot_result @@ -7045,12 +8491,12 @@ dir=$func_dirname_result # We need an absolute path. case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then - func_warning "cannot determine absolute directory name of \`$dir'" - absdir="$dir" + func_warning "cannot determine absolute directory name of '$dir'" + absdir=$dir fi ;; esac @@ -7058,35 +8504,35 @@ case $host in *-*-darwin*) depdepl= - eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names" ; then - for tmp in $deplibrary_names ; do + eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names"; then + for tmp in $deplibrary_names; do depdepl=$tmp done - if test -f "$absdir/$objdir/$depdepl" ; then - depdepl="$absdir/$objdir/$depdepl" - darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -f "$absdir/$objdir/$depdepl"; then + depdepl=$absdir/$objdir/$depdepl + darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then - darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi - func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl" + func_append linker_flags " -dylib_file $darwin_install_name:$depdepl" path= fi fi ;; *) - path="-L$absdir/$objdir" + path=-L$absdir/$objdir ;; esac else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" + func_fatal_error "'$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ - func_warning "\`$deplib' seems to be moved" + func_warning "'$deplib' seems to be moved" - path="-L$absdir" + path=-L$absdir fi ;; esac @@ -7098,23 +8544,23 @@ fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs - if test "$pass" = link; then - if test "$linkmode" = "prog"; then + if test link = "$pass"; then + if test prog = "$linkmode"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then + dependency_libs=$newdependency_libs + if test dlpreopen = "$pass"; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then + if test dlopen != "$pass"; then + test conv = "$pass" || { # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do @@ -7124,12 +8570,12 @@ esac done newlib_search_path= - fi + } - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else + if test prog,link = "$linkmode,$pass"; then vars="compile_deplibs finalize_deplibs" + else + vars=deplibs fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order @@ -7187,62 +8633,93 @@ eval $var=\"$tmp_libs\" done # for var fi + + # Add Sun CC postdeps if required: + test CXX = "$tagname" && { + case $host_os in + linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C++ 5.9 + func_suncc_cstd_abi + + if test no != "$suncc_use_cstd_abi"; then + func_append postdeps ' -library=Cstd -library=Crun' + fi + ;; + esac + ;; + + solaris*) + func_cc_basename "$CC" + case $func_cc_basename_result in + CC* | sunCC*) + func_suncc_cstd_abi + + if test no != "$suncc_use_cstd_abi"; then + func_append postdeps ' -library=Cstd -library=Crun' + fi + ;; + esac + ;; + esac + } + # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= - for i in $dependency_libs ; do + for i in $dependency_libs; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) - i="" + i= ;; esac - if test -n "$i" ; then + if test -n "$i"; then func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" + if test prog = "$linkmode"; then + dlfiles=$newdlfiles fi - if test "$linkmode" = prog || test "$linkmode" = lib; then - dlprefiles="$newdlprefiles" + if test prog = "$linkmode" || test lib = "$linkmode"; then + dlprefiles=$newdlprefiles fi case $linkmode in oldlib) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for archives" + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + func_warning "'-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for archives" ;; + func_warning "'-l' and '-L' are ignored for archives" ;; esac test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for archives" + func_warning "'-rpath' is ignored for archives" test -n "$xrpath" && \ - func_warning "\`-R' is ignored for archives" + func_warning "'-R' is ignored for archives" test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for archives" + func_warning "'-version-info/-version-number' is ignored for archives" test -n "$release" && \ - func_warning "\`-release' is ignored for archives" + func_warning "'-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ - func_warning "\`-export-symbols' is ignored for archives" + func_warning "'-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no - oldlibs="$output" + oldlibs=$output func_append objs "$old_deplibs" ;; lib) - # Make sure we only generate libraries of the form `libNAME.la'. + # Make sure we only generate libraries of the form 'libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" @@ -7251,10 +8728,10 @@ eval libname=\"$libname_spec\" ;; *) - test "$module" = no && \ - func_fatal_help "libtool library \`$output' must begin with \`lib'" + test no = "$module" \ + && func_fatal_help "libtool library '$output' must begin with 'lib'" - if test "$need_lib_prefix" != no; then + if test no != "$need_lib_prefix"; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result @@ -7268,8 +8745,8 @@ esac if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + if test pass_all != "$deplibs_check_method"; then + func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs" else echo $ECHO "*** Warning: Linking the shared library $output against the non-libtool" @@ -7278,21 +8755,21 @@ fi fi - test "$dlself" != no && \ - func_warning "\`-dlopen self' is ignored for libtool libraries" + test no = "$dlself" \ + || func_warning "'-dlopen self' is ignored for libtool libraries" set dummy $rpath shift - test "$#" -gt 1 && \ - func_warning "ignoring multiple \`-rpath's for a libtool library" + test 1 -lt "$#" \ + && func_warning "ignoring multiple '-rpath's for a libtool library" - install_libdir="$1" + install_libdir=$1 oldlibs= if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so + # Some compilers have problems with a '.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" @@ -7301,20 +8778,20 @@ fi test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + func_warning "'-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ - func_warning "\`-release' is ignored for convenience libraries" + func_warning "'-release' is ignored for convenience libraries" else # Parse the version information argument. - save_ifs="$IFS"; IFS=':' + save_ifs=$IFS; IFS=: set dummy $vinfo 0 0 0 shift - IFS="$save_ifs" + IFS=$save_ifs test -n "$7" && \ - func_fatal_help "too many parameters to \`-version-info'" + func_fatal_help "too many parameters to '-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts @@ -7322,45 +8799,45 @@ case $vinfo_number in yes) - number_major="$1" - number_minor="$2" - number_revision="$3" + number_major=$1 + number_minor=$2 + number_revision=$3 # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix - # which has an extra 1 added just for fun + # that has an extra 1 added just for fun # case $version_type in # correct linux to gnu/linux during the next big refactor - darwin|linux|osf|windows|none) + darwin|freebsd-elf|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result - age="$number_minor" - revision="$number_revision" + age=$number_minor + revision=$number_revision ;; - freebsd-aout|freebsd-elf|qnx|sunos) - current="$number_major" - revision="$number_minor" - age="0" + freebsd-aout|qnx|sunos) + current=$number_major + revision=$number_minor + age=0 ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result - age="$number_minor" - revision="$number_minor" + age=$number_minor + revision=$number_minor lt_irix_increment=no ;; *) - func_fatal_configuration "$modename: unknown library version type \`$version_type'" + func_fatal_configuration "$modename: unknown library version type '$version_type'" ;; esac ;; no) - current="$1" - revision="$2" - age="$3" + current=$1 + revision=$2 + age=$3 ;; esac @@ -7368,30 +8845,30 @@ case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "CURRENT \`$current' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "CURRENT '$current' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "REVISION \`$revision' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "REVISION '$revision' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "AGE \`$age' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "AGE '$age' must be a nonnegative integer" + func_fatal_error "'$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then - func_error "AGE \`$age' is greater than the current interface number \`$current'" - func_fatal_error "\`$vinfo' is not valid version information" + func_error "AGE '$age' is greater than the current interface number '$current'" + func_fatal_error "'$vinfo' is not valid version information" fi # Calculate the version variables. @@ -7406,26 +8883,36 @@ # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result - versuffix="$major.$age.$revision" + versuffix=$major.$age.$revision # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result - xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + # On Darwin other compilers + case $CC in + nagfor*) + verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" + ;; + *) + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + esac ;; freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; + major=.$current + versuffix=.$current.$revision ;; freebsd-elf) - major=".$current" - versuffix=".$current" + func_arith $current - $age + major=.$func_arith_result + versuffix=$major.$age.$revision ;; irix | nonstopux) - if test "X$lt_irix_increment" = "Xno"; then + if test no = "$lt_irix_increment"; then func_arith $current - $age else func_arith $current - $age + 1 @@ -7436,69 +8923,74 @@ nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac - verstring="$verstring_prefix$major.$revision" + verstring=$verstring_prefix$major.$revision # Add in all the interfaces that we are compatible with. loop=$revision - while test "$loop" -ne 0; do + while test 0 -ne "$loop"; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result - verstring="$verstring_prefix$major.$iface:$verstring" + verstring=$verstring_prefix$major.$iface:$verstring done - # Before this point, $major must not contain `.'. + # Before this point, $major must not contain '.'. major=.$major - versuffix="$major.$revision" + versuffix=$major.$revision ;; linux) # correct to gnu/linux during the next big refactor func_arith $current - $age major=.$func_arith_result - versuffix="$major.$age.$revision" + versuffix=$major.$age.$revision ;; osf) func_arith $current - $age major=.$func_arith_result - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" + versuffix=.$current.$age.$revision + verstring=$current.$age.$revision # Add in all the interfaces that we are compatible with. loop=$age - while test "$loop" -ne 0; do + while test 0 -ne "$loop"; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result - verstring="$verstring:${iface}.0" + verstring=$verstring:$iface.0 done # Make executables depend on our current version. - func_append verstring ":${current}.0" + func_append verstring ":$current.0" ;; qnx) - major=".$current" - versuffix=".$current" + major=.$current + versuffix=.$current + ;; + + sco) + major=.$current + versuffix=.$current ;; sunos) - major=".$current" - versuffix=".$current.$revision" + major=.$current + versuffix=.$current.$revision ;; windows) # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. + # extension on DOS 8.3 file systems. func_arith $current - $age major=$func_arith_result - versuffix="-$major" + versuffix=-$major ;; *) - func_fatal_configuration "unknown library version type \`$version_type'" + func_fatal_configuration "unknown library version type '$version_type'" ;; esac @@ -7512,42 +9004,45 @@ verstring= ;; *) - verstring="0.0" + verstring=0.0 ;; esac - if test "$need_version" = no; then + if test no = "$need_version"; then versuffix= else - versuffix=".0.0" + versuffix=.0.0 fi fi # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then + if test yes,no = "$avoid_version,$need_version"; then major= versuffix= - verstring="" + verstring= fi # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - func_warning "undefined symbols not allowed in $host shared libraries" - build_libtool_libs=no - build_old_libs=yes + if test yes = "$allow_undefined"; then + if test unsupported = "$allow_undefined_flag"; then + if test yes = "$build_old_libs"; then + func_warning "undefined symbols not allowed in $host shared libraries; building static only" + build_libtool_libs=no + else + func_fatal_error "can't build $host shared library unless -no-undefined is specified" + fi fi else # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" + allow_undefined_flag=$no_undefined_flag fi fi - func_generate_dlsyms "$libname" "$libname" "yes" + func_generate_dlsyms "$libname" "$libname" : func_append libobjs " $symfileobj" - test "X$libobjs" = "X " && libobjs= + test " " = "$libobjs" && libobjs= - if test "$opt_mode" != relink; then + if test relink != "$opt_mode"; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= @@ -7556,8 +9051,8 @@ case $p in *.$objext | *.gcno) ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*) + if test -n "$precious_files_regex"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue @@ -7573,11 +9068,11 @@ fi # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. @@ -7598,13 +9093,13 @@ *) func_append finalize_rpath " $libdir" ;; esac done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" + old_dlfiles=$dlfiles dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in @@ -7614,7 +9109,7 @@ done # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" + old_dlprefiles=$dlprefiles dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in @@ -7623,7 +9118,7 @@ esac done - if test "$build_libtool_libs" = yes; then + if test yes = "$build_libtool_libs"; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) @@ -7647,7 +9142,7 @@ ;; *) # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then + if test yes = "$build_libtool_need_lc"; then func_append deplibs " -lc" fi ;; @@ -7663,9 +9158,9 @@ # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? - release="" - versuffix="" - major="" + release= + versuffix= + major= newdeplibs= droppeddeps=no case $deplibs_check_method in @@ -7694,20 +9189,20 @@ -l*) func_stripname -l '' "$i" name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $i "*) func_append newdeplibs " $i" - i="" + i= ;; esac fi - if test -n "$i" ; then + if test -n "$i"; then libname=`eval "\\$ECHO \"$libname_spec\""` deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` set dummy $deplib_matches; shift deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then func_append newdeplibs " $i" else droppeddeps=yes @@ -7737,20 +9232,20 @@ $opt_dry_run || $RM conftest if $LTCC $LTCFLAGS -o conftest conftest.c $i; then ldd_output=`ldd conftest` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $i "*) func_append newdeplibs " $i" - i="" + i= ;; esac fi - if test -n "$i" ; then + if test -n "$i"; then libname=`eval "\\$ECHO \"$libname_spec\""` deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` set dummy $deplib_matches; shift deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then func_append newdeplibs " $i" else droppeddeps=yes @@ -7787,24 +9282,24 @@ -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= ;; esac fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then libname=`eval "\\$ECHO \"$libname_spec\""` if test -n "$file_magic_glob"; then libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` else libnameglob=$libname fi - test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` + test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - if test "$want_nocaseglob" = yes; then + if test yes = "$want_nocaseglob"; then shopt -s nocaseglob potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` $nocaseglob @@ -7822,25 +9317,25 @@ # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? - potlib="$potent_lib" + potlib=$potent_lib while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + potliblink=`ls -ld $potlib | $SED 's/.* -> //'` case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;; + *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= break 2 fi done done fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." @@ -7848,7 +9343,7 @@ echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then + if test -z "$potlib"; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" @@ -7871,30 +9366,30 @@ -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + if test yes = "$allow_libtool_libs_with_static_runtimes"; then case " $predeps $postdeps " in *" $a_deplib "*) func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= ;; esac fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test + potlib=$potent_lib # see symlink-check above in file_magic test if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then func_append newdeplibs " $a_deplib" - a_deplib="" + a_deplib= break 2 fi done done fi - if test -n "$a_deplib" ; then + if test -n "$a_deplib"; then droppeddeps=yes echo $ECHO "*** Warning: linker path does not have real file for library $a_deplib." @@ -7902,7 +9397,7 @@ echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have" echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then + if test -z "$potlib"; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" @@ -7918,18 +9413,18 @@ done # Gone through all deplibs. ;; none | unknown | *) - newdeplibs="" + newdeplibs= tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - for i in $predeps $postdeps ; do + if test yes = "$allow_libtool_libs_with_static_runtimes"; then + for i in $predeps $postdeps; do # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"` done fi case $tmp_deplibs in *[!\ \ ]*) echo - if test "X$deplibs_check_method" = "Xnone"; then + if test none = "$deplibs_check_method"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." @@ -7953,8 +9448,8 @@ ;; esac - if test "$droppeddeps" = yes; then - if test "$module" = yes; then + if test yes = "$droppeddeps"; then + if test yes = "$module"; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" @@ -7963,12 +9458,12 @@ if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + echo "*** 'nm' from GNU binutils and a full rebuild may help." fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" + if test no = "$build_old_libs"; then + oldlibs=$output_objdir/$libname.$libext build_libtool_libs=module build_old_libs=yes else @@ -7979,14 +9474,14 @@ echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." - if test "$allow_undefined" = no; then + if test no = "$allow_undefined"; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" + if test no = "$build_old_libs"; then + oldlibs=$output_objdir/$libname.$libext build_libtool_libs=module build_old_libs=yes else @@ -8032,7 +9527,7 @@ *) func_append new_libs " $deplib" ;; esac done - deplibs="$new_libs" + deplibs=$new_libs # All the library-specific variables (install_libdir is set above). library_names= @@ -8040,25 +9535,25 @@ dlname= # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - # Remove ${wl} instances when linking with ld. + if test yes = "$build_libtool_libs"; then + # Remove $wl instances when linking with ld. # FIXME: should test the right _cmds variable. case $archive_cmds in *\$LD\ *) wl= ;; esac - if test "$hardcode_into_libs" = yes; then + if test yes = "$hardcode_into_libs"; then # Hardcode the library paths hardcode_libdirs= dep_rpath= - rpath="$finalize_rpath" - test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + rpath=$finalize_rpath + test relink = "$opt_mode" || rpath=$compile_rpath$rpath for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then func_replace_sysroot "$libdir" libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" + hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in @@ -8083,7 +9578,7 @@ # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" + libdir=$hardcode_libdirs eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then @@ -8097,8 +9592,8 @@ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi - shlibpath="$finalize_shlibpath" - test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + shlibpath=$finalize_shlibpath + test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi @@ -8108,19 +9603,19 @@ eval library_names=\"$library_names_spec\" set dummy $library_names shift - realname="$1" + realname=$1 shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else - soname="$realname" + soname=$realname fi if test -z "$dlname"; then dlname=$soname fi - lib="$output_objdir/$realname" + lib=$output_objdir/$realname linknames= for link do @@ -8134,7 +9629,7 @@ delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols="$output_objdir/$libname.uexp" + export_symbols=$output_objdir/$libname.uexp func_append delfiles " $export_symbols" fi @@ -8143,31 +9638,31 @@ cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile - if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + func_dll_def_p "$export_symbols" || { # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. - orig_export_symbols="$export_symbols" + orig_export_symbols=$export_symbols export_symbols= always_export_symbols=yes - fi + } fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" + if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for '$libname.la'" + export_symbols=$output_objdir/$libname.exp $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds - save_ifs="$IFS"; IFS='~' + save_ifs=$IFS; IFS='~' for cmd1 in $cmds; do - IFS="$save_ifs" + IFS=$save_ifs # Take the normal branch if the nm_file_list_spec branch # doesn't work or if tool conversion is not needed. case $nm_file_list_spec~$to_tool_file_cmd in @@ -8181,7 +9676,7 @@ try_normal_branch=no ;; esac - if test "$try_normal_branch" = yes \ + if test yes = "$try_normal_branch" \ && { test "$len" -lt "$max_cmd_len" \ || test "$max_cmd_len" -le -1; } then @@ -8192,7 +9687,7 @@ output_la=$func_basename_result save_libobjs=$libobjs save_output=$output - output=${output_objdir}/${output_la}.nm + output=$output_objdir/$output_la.nm func_to_tool_file "$output" libobjs=$nm_file_list_spec$func_to_tool_file_result func_append delfiles " $output" @@ -8215,8 +9710,8 @@ break fi done - IFS="$save_ifs" - if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + IFS=$save_ifs + if test -n "$export_symbols_regex" && test : != "$skipped_export"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi @@ -8224,16 +9719,16 @@ fi if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + tmp_export_symbols=$export_symbols + test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi - if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + if test : != "$skipped_export" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + func_verbose "filter symbol list for '$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine + # 's' commands, which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. @@ -8252,11 +9747,11 @@ ;; esac done - deplibs="$tmp_deplibs" + deplibs=$tmp_deplibs if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && - test "$compiler_needs_object" = yes && + test yes = "$compiler_needs_object" && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. @@ -8267,7 +9762,7 @@ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $convenience @@ -8276,18 +9771,18 @@ fi fi - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then + if test yes = "$module" && test -n "$module_cmds"; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds @@ -8305,7 +9800,7 @@ fi fi - if test "X$skipped_export" != "X:" && + if test : != "$skipped_export" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then @@ -8338,8 +9833,8 @@ last_robj= k=1 - if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then - output=${output_objdir}/${output_la}.lnkscript + if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then + output=$output_objdir/$output_la.lnkscript func_verbose "creating GNU ld script: $output" echo 'INPUT (' > $output for obj in $save_libobjs @@ -8351,14 +9846,14 @@ func_append delfiles " $output" func_to_tool_file "$output" output=$func_to_tool_file_result - elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then - output=${output_objdir}/${output_la}.lnk + elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then + output=$output_objdir/$output_la.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= - if test "$compiler_needs_object" = yes; then + if test yes = "$compiler_needs_object"; then firstobj="$1 " shift fi @@ -8373,7 +9868,7 @@ else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." - output=$output_objdir/$output_la-${k}.$objext + output=$output_objdir/$output_la-$k.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result @@ -8385,13 +9880,13 @@ func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result - if test "X$objlist" = X || + if test -z "$objlist" || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. - if test "$k" -eq 1 ; then + if test 1 -eq "$k"; then # The first file doesn't have a previous command to add. reload_objs=$objlist eval concat_cmds=\"$reload_cmds\" @@ -8401,10 +9896,10 @@ reload_objs="$objlist $last_robj" eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi - last_robj=$output_objdir/$output_la-${k}.$objext + last_robj=$output_objdir/$output_la-$k.$objext func_arith $k + 1 k=$func_arith_result - output=$output_objdir/$output_la-${k}.$objext + output=$output_objdir/$output_la-$k.$objext objlist=" $obj" func_len " $last_robj" func_arith $len0 + $func_len_result @@ -8416,9 +9911,9 @@ # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ reload_objs="$objlist $last_robj" - eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + eval concat_cmds=\"\$concat_cmds$reload_cmds\" if test -n "$last_robj"; then - eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi func_append delfiles " $output" @@ -8426,9 +9921,9 @@ output= fi - if ${skipped_export-false}; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" + ${skipped_export-false} && { + func_verbose "generating symbol list for '$libname.la'" + export_symbols=$output_objdir/$libname.exp $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. @@ -8437,16 +9932,16 @@ if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi - fi + } test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' + save_ifs=$IFS; IFS='~' for cmd in $concat_cmds; do - IFS="$save_ifs" - $opt_silent || { + IFS=$save_ifs + $opt_quiet || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } @@ -8454,7 +9949,7 @@ lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8463,7 +9958,7 @@ exit $lt_exit } done - IFS="$save_ifs" + IFS=$save_ifs if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' @@ -8471,18 +9966,18 @@ fi fi - if ${skipped_export-false}; then + ${skipped_export-false} && { if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + tmp_export_symbols=$export_symbols + test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + func_verbose "filter symbol list for '$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine + # 's' commands, which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. @@ -8491,7 +9986,7 @@ export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi - fi + } libobjs=$output # Restore the value of output. @@ -8505,7 +10000,7 @@ # value of $libobjs for piecewise linking. # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then + if test yes = "$module" && test -n "$module_cmds"; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else @@ -8527,7 +10022,7 @@ # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $dlprefiles @@ -8535,11 +10030,12 @@ test "X$libobjs" = "X " && libobjs= fi - save_ifs="$IFS"; IFS='~' + save_ifs=$IFS; IFS='~' for cmd in $cmds; do - IFS="$save_ifs" + IFS=$sp$nl eval cmd=\"$cmd\" - $opt_silent || { + IFS=$save_ifs + $opt_quiet || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } @@ -8547,7 +10043,7 @@ lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8556,10 +10052,10 @@ exit $lt_exit } done - IFS="$save_ifs" + IFS=$save_ifs # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test relink = "$opt_mode"; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then @@ -8579,39 +10075,39 @@ done # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then + if test yes = "$module" || test yes = "$export_dynamic"; then # On all known operating systems, these are identical. - dlname="$soname" + dlname=$soname fi fi ;; obj) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for objects" + if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then + func_warning "'-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for objects" ;; + func_warning "'-l' and '-L' are ignored for objects" ;; esac test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for objects" + func_warning "'-rpath' is ignored for objects" test -n "$xrpath" && \ - func_warning "\`-R' is ignored for objects" + func_warning "'-R' is ignored for objects" test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for objects" + func_warning "'-version-info' is ignored for objects" test -n "$release" && \ - func_warning "\`-release' is ignored for objects" + func_warning "'-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ - func_fatal_error "cannot build library object \`$output' from non-libtool objects" + func_fatal_error "cannot build library object '$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" @@ -8619,7 +10115,7 @@ ;; *) libobj= - obj="$output" + obj=$output ;; esac @@ -8632,17 +10128,19 @@ # the extraction. reload_conv_objs= gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec and hope we can get by with - # turning comma into space.. - wl= - + # if reload_cmds runs $LD directly, get rid of -Wl from + # whole_archive_flag_spec and hope we can get by with turning comma + # into space. + case $reload_cmds in + *\$LD[\ \$]*) wl= ;; + esac if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags else - gentop="$output_objdir/${obj}x" + gentop=$output_objdir/${obj}x func_append generated " $gentop" func_extract_archives $gentop $convenience @@ -8651,12 +10149,12 @@ fi # If we're not building shared, we need to use non_pic_objs - test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + test yes = "$build_libtool_libs" || libobjs=$non_pic_objects # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs - output="$obj" + output=$obj func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. @@ -8668,7 +10166,7 @@ exit $EXIT_SUCCESS fi - if test "$build_libtool_libs" != yes; then + test yes = "$build_libtool_libs" || { if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi @@ -8678,12 +10176,12 @@ # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS - fi + } - if test -n "$pic_flag" || test "$pic_mode" != default; then + if test -n "$pic_flag" || test default != "$pic_mode"; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" - output="$libobj" + output=$libobj func_execute_cmds "$reload_cmds" 'exit $?' fi @@ -8700,16 +10198,14 @@ output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for programs" + func_warning "'-version-info' is ignored for programs" test -n "$release" && \ - func_warning "\`-release' is ignored for programs" + func_warning "'-release' is ignored for programs" - test "$preload" = yes \ - && test "$dlopen_support" = unknown \ - && test "$dlopen_self" = unknown \ - && test "$dlopen_self_static" = unknown && \ - func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + $preload \ + && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \ + && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) @@ -8723,11 +10219,11 @@ *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). - if test "$tagname" = CXX ; then + if test CXX = "$tagname"; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) - func_append compile_command " ${wl}-bind_at_load" - func_append finalize_command " ${wl}-bind_at_load" + func_append compile_command " $wl-bind_at_load" + func_append finalize_command " $wl-bind_at_load" ;; esac fi @@ -8763,7 +10259,7 @@ *) func_append new_libs " $deplib" ;; esac done - compile_deplibs="$new_libs" + compile_deplibs=$new_libs func_append compile_command " $compile_deplibs" @@ -8787,7 +10283,7 @@ if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" + hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in @@ -8810,7 +10306,7 @@ fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; @@ -8827,10 +10323,10 @@ # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" + libdir=$hardcode_libdirs eval rpath=\" $hardcode_libdir_flag_spec\" fi - compile_rpath="$rpath" + compile_rpath=$rpath rpath= hardcode_libdirs= @@ -8838,7 +10334,7 @@ if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" + hardcode_libdirs=$libdir else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in @@ -8863,45 +10359,43 @@ # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" + libdir=$hardcode_libdirs eval rpath=\" $hardcode_libdir_flag_spec\" fi - finalize_rpath="$rpath" + finalize_rpath=$rpath - if test -n "$libobjs" && test "$build_old_libs" = yes; then + if test -n "$libobjs" && test yes = "$build_old_libs"; then # Transform all the library objects into standard objects. compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi - func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + func_generate_dlsyms "$outputname" "@PROGRAM@" false # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi - wrappers_required=yes + wrappers_required=: case $host in *cegcc* | *mingw32ce*) # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. - wrappers_required=no + wrappers_required=false ;; *cygwin* | *mingw* ) - if test "$build_libtool_libs" != yes; then - wrappers_required=no - fi + test yes = "$build_libtool_libs" || wrappers_required=false ;; *) - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - wrappers_required=no + if test no = "$need_relink" || test yes != "$build_libtool_libs"; then + wrappers_required=false fi ;; esac - if test "$wrappers_required" = no; then + $wrappers_required || { # Replace the output file specification. compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" + link_command=$compile_command$compile_rpath # We have no uninstalled library dependencies, so finalize right now. exit_status=0 @@ -8914,12 +10408,12 @@ fi # Delete the generated files. - if test -f "$output_objdir/${outputname}S.${objext}"; then - func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + if test -f "$output_objdir/${outputname}S.$objext"; then + func_show_eval '$RM "$output_objdir/${outputname}S.$objext"' fi exit $exit_status - fi + } if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" @@ -8949,9 +10443,9 @@ fi fi - if test "$no_install" = yes; then + if test yes = "$no_install"; then # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" + link_command=$compile_var$compile_command$compile_rpath # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. @@ -8968,27 +10462,28 @@ exit $EXIT_SUCCESS fi - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - func_warning "this platform does not like uninstalled shared libraries" - func_warning "\`$output' will be relinked during installation" - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi + case $hardcode_action,$fast_install in + relink,*) + # Fast installation is not supported + link_command=$compile_var$compile_command$compile_rpath + relink_command=$finalize_var$finalize_command$finalize_rpath + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "'$output' will be relinked during installation" + ;; + *,yes) + link_command=$finalize_var$compile_command$finalize_rpath + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + ;; + *,no) + link_command=$compile_var$compile_command$compile_rpath + relink_command=$finalize_var$finalize_command$finalize_rpath + ;; + *,needless) + link_command=$finalize_var$compile_command$finalize_rpath + relink_command= + ;; + esac # Replace the output file specification. link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` @@ -9045,8 +10540,8 @@ func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" + cwrappersource=$output_path/$objdir/lt-$output_name.c + cwrapper=$output_path/$output_name.exe $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 @@ -9067,7 +10562,7 @@ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. - if test "x$build" = "x$host" ; then + if test "x$build" = "x$host"; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result @@ -9090,25 +10585,27 @@ # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save $symfileobj" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" + case $build_libtool_libs in + convenience) + oldobjs="$libobjs_save $symfileobj" + addlibs=$convenience build_libtool_libs=no - else + ;; + module) + oldobjs=$libobjs_save + addlibs=$old_convenience + build_libtool_libs=no + ;; + *) oldobjs="$old_deplibs $non_pic_objects" - if test "$preload" = yes && test -f "$symfileobj"; then - func_append oldobjs " $symfileobj" - fi - fi - addlibs="$old_convenience" - fi + $preload && test -f "$symfileobj" \ + && func_append oldobjs " $symfileobj" + addlibs=$old_convenience + ;; + esac if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $addlibs @@ -9116,13 +10613,13 @@ fi # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_extract_archives $gentop $dlprefiles @@ -9143,7 +10640,7 @@ : else echo "copying selected object files to avoid basename conflicts..." - gentop="$output_objdir/${outputname}x" + gentop=$output_objdir/${outputname}x func_append generated " $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs @@ -9152,7 +10649,7 @@ for obj in $save_oldobjs do func_basename "$obj" - objbase="$func_basename_result" + objbase=$func_basename_result case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) @@ -9221,18 +10718,18 @@ else # the above command should be used before it gets too long oldobjs=$objlist - if test "$obj" = "$last_oldobj" ; then + if test "$obj" = "$last_oldobj"; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + eval concat_cmds=\"\$concat_cmds$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist - if test "X$oldobjs" = "X" ; then + if test -z "$oldobjs"; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" @@ -9249,7 +10746,7 @@ case $output in *.la) old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" + test yes = "$build_old_libs" && old_library=$libname.$libext func_verbose "creating $output" # Preserve any variables that may affect compiler behavior @@ -9264,31 +10761,31 @@ fi done # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - if test "$hardcode_automatic" = yes ; then + if test yes = "$hardcode_automatic"; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do - if test "$installed" = yes; then + if test yes = "$installed"; then if test -z "$install_libdir"; then break fi - output="$output_objdir/$outputname"i + output=$output_objdir/${outputname}i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" - name="$func_basename_result" + name=$func_basename_result func_resolve_sysroot "$deplib" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" + func_fatal_error "'$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ;; -L*) @@ -9304,23 +10801,23 @@ *) func_append newdependency_libs " $deplib" ;; esac done - dependency_libs="$newdependency_libs" + dependency_libs=$newdependency_libs newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + name=$func_basename_result + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" + func_fatal_error "'$lib' is not a valid libtool archive" func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ;; *) func_append newdlfiles " $lib" ;; esac done - dlfiles="$newdlfiles" + dlfiles=$newdlfiles newdlprefiles= for lib in $dlprefiles; do case $lib in @@ -9330,34 +10827,34 @@ # didn't already link the preopened objects directly into # the library: func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + name=$func_basename_result + eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" + func_fatal_error "'$lib' is not a valid libtool archive" func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ;; esac done - dlprefiles="$newdlprefiles" + dlprefiles=$newdlprefiles else newdlfiles= for lib in $dlfiles; do case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlfiles " $abs" done - dlfiles="$newdlfiles" + dlfiles=$newdlfiles newdlprefiles= for lib in $dlprefiles; do case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; *) abs=`pwd`"/$lib" ;; esac func_append newdlprefiles " $abs" done - dlprefiles="$newdlprefiles" + dlprefiles=$newdlprefiles fi $RM $output # place dlname in correct position for cygwin @@ -9373,10 +10870,9 @@ case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. - if test "x$bindir" != x ; - then + if test -n "$bindir"; then func_relative_path "$install_libdir" "$bindir" - tdlname=$func_relative_path_result$dlname + tdlname=$func_relative_path_result/$dlname else # Otherwise fall back on heuristic. tdlname=../bin/$dlname @@ -9385,7 +10881,7 @@ esac $ECHO > $output "\ # $outputname - a libtool library file -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# Generated by $PROGRAM (GNU $PACKAGE) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. @@ -9399,7 +10895,7 @@ # The name of the static archive. old_library='$old_library' -# Linker flags that can not go in dependency_libs. +# Linker flags that cannot go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. @@ -9425,7 +10921,7 @@ # Directory that this library needs to be installed in: libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes; then + if test no,yes = "$installed,$need_relink"; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi @@ -9440,27 +10936,29 @@ exit $EXIT_SUCCESS } -{ test "$opt_mode" = link || test "$opt_mode" = relink; } && - func_mode_link ${1+"$@"} +if test link = "$opt_mode" || test relink = "$opt_mode"; then + func_mode_link ${1+"$@"} +fi # func_mode_uninstall arg... func_mode_uninstall () { - $opt_debug - RM="$nonopt" + $debug_cmd + + RM=$nonopt files= - rmforce= + rmforce=false exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. - libtool_install_magic="$magic" + libtool_install_magic=$magic for arg do case $arg in - -f) func_append RM " $arg"; rmforce=yes ;; + -f) func_append RM " $arg"; rmforce=: ;; -*) func_append RM " $arg" ;; *) func_append files " $arg" ;; esac @@ -9473,18 +10971,18 @@ for file in $files; do func_dirname "$file" "" "." - dir="$func_dirname_result" - if test "X$dir" = X.; then - odir="$objdir" + dir=$func_dirname_result + if test . = "$dir"; then + odir=$objdir else - odir="$dir/$objdir" + odir=$dir/$objdir fi func_basename "$file" - name="$func_basename_result" - test "$opt_mode" = uninstall && odir="$dir" + name=$func_basename_result + test uninstall = "$opt_mode" && odir=$dir # Remember odir for removal later, being careful to avoid duplicates - if test "$opt_mode" = clean; then + if test clean = "$opt_mode"; then case " $rmdirs " in *" $odir "*) ;; *) func_append rmdirs " $odir" ;; @@ -9499,11 +10997,11 @@ elif test -d "$file"; then exit_status=1 continue - elif test "$rmforce" = yes; then + elif $rmforce; then continue fi - rmfiles="$file" + rmfiles=$file case $name in *.la) @@ -9517,7 +11015,7 @@ done test -n "$old_library" && func_append rmfiles " $odir/$old_library" - case "$opt_mode" in + case $opt_mode in clean) case " $library_names " in *" $dlname "*) ;; @@ -9528,12 +11026,12 @@ uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. - func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; @@ -9549,21 +11047,19 @@ func_source $dir/$name # Add PIC object to the list of files to remove. - if test -n "$pic_object" && - test "$pic_object" != none; then + if test -n "$pic_object" && test none != "$pic_object"; then func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && - test "$non_pic_object" != none; then + if test -n "$non_pic_object" && test none != "$non_pic_object"; then func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) - if test "$opt_mode" = clean ; then + if test clean = "$opt_mode"; then noexename=$name case $file in *.exe) @@ -9590,12 +11086,12 @@ # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles - func_append rmfiles " $odir/$name $odir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then + func_append rmfiles " $odir/$name $odir/${name}S.$objext" + if test yes = "$fast_install" && test -n "$relink_command"; then func_append rmfiles " $odir/lt-$name" fi - if test "X$noexename" != "X$name" ; then - func_append rmfiles " $odir/lt-${noexename}.c" + if test "X$noexename" != "X$name"; then + func_append rmfiles " $odir/lt-$noexename.c" fi fi fi @@ -9604,7 +11100,7 @@ func_show_eval "$RM $rmfiles" 'exit_status=1' done - # Try to remove the ${objdir}s in the directories where we deleted files + # Try to remove the $objdir's in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" @@ -9614,16 +11110,17 @@ exit $exit_status } -{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && - func_mode_uninstall ${1+"$@"} +if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then + func_mode_uninstall ${1+"$@"} +fi test -z "$opt_mode" && { - help="$generic_help" + help=$generic_help func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode '$opt_mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" @@ -9634,7 +11131,7 @@ # The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting +# where we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support @@ -9657,5 +11154,3 @@ # mode:shell-script # sh-indentation:2 # End: -# vi:sw=2 - diff -Nru speex-1.2~rc1.2/m4/add_cflags.m4 speex-1.2.0/m4/add_cflags.m4 --- speex-1.2~rc1.2/m4/add_cflags.m4 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/m4/add_cflags.m4 2015-07-23 18:05:56.000000000 +0000 @@ -0,0 +1,18 @@ +dnl @synopsis XIPH_ADD_CFLAGS +dnl +dnl Add the given option to CFLAGS, if it doesn't break the compiler + +AC_DEFUN([XIPH_ADD_CFLAGS], +[AC_MSG_CHECKING([if $CC accepts $1]) + ac_add_cflags__old_cflags="$CFLAGS" + CFLAGS="$1" + AC_TRY_LINK([ + #include + ], + [puts("Hello, World!"); return 0;], + AC_MSG_RESULT([yes]) + CFLAGS="$ac_add_cflags__old_cflags $1", + AC_MSG_RESULT([no]) + CFLAGS="$ac_add_cflags__old_cflags" + ) +])# XIPH_ADD_CFLAGS diff -Nru speex-1.2~rc1.2/m4/libtool.m4 speex-1.2.0/m4/libtool.m4 --- speex-1.2~rc1.2/m4/libtool.m4 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/m4/libtool.m4 2016-12-07 19:52:48.000000000 +0000 @@ -0,0 +1,8388 @@ +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +]) + +# serial 58 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS=$ltmain + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +_LT_SETUP + +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_PREPARE_CC_BASENAME +# ----------------------- +m4_defun([_LT_PREPARE_CC_BASENAME], [ +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in @S|@*""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} +])# _LT_PREPARE_CC_BASENAME + + +# _LT_CC_BASENAME(CC) +# ------------------- +# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME, +# but that macro is also expanded into generated libtool script, which +# arranges for $SED and $ECHO to be set by different means. +m4_defun([_LT_CC_BASENAME], +[m4_require([_LT_PREPARE_CC_BASENAME])dnl +AC_REQUIRE([_LT_DECL_SED])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl +func_cc_basename $1 +cc_basename=$func_cc_basename_result +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl + +_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl +dnl +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_WITH_SYSROOT])dnl +m4_require([_LT_CMD_TRUNCATE])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options that allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR + +m4_require([_LT_TAG_COMPILER])dnl + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld=$lt_cv_prog_gnu_ld + +old_CC=$CC +old_CFLAGS=$CFLAGS + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + _LT_PATH_MAGIC + fi + ;; +esac + +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + + +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from 'configure', and 'config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# 'config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain=$ac_aux_dir/ltmain.sh +])# _LT_PROG_LTMAIN + + +## ------------------------------------- ## +## Accumulate code for creating libtool. ## +## ------------------------------------- ## + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the 'libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + +## ------------------------ ## +## FIXME: Eliminate VARNAME ## +## ------------------------ ## + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to 'config.status' so that its +# declaration there will have the same value as in 'configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags='_LT_TAGS'dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into 'config.status', and then the shell code to quote escape them in +# for loops in 'config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# '#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test 0 = "$lt_write_fail" && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +'$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to ." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2011 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test 0 != $[#] +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try '$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try '$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test yes = "$silent" && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options that allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST + fi + + cfgfile=${ofile}T + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL +# Generated automatically by $as_me ($PACKAGE) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + +_LT_COPYING +_LT_LIBTOOL_TAGS + +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +_LT_PREPARE_MUNGE_PATH_LIST +_LT_PREPARE_CC_BASENAME + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Go], [_LT_LANG(GO)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +m4_ifndef([AC_PROG_GO], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_GO. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ +m4_defun([AC_PROG_GO], +[AC_LANG_PUSH(Go)dnl +AC_ARG_VAR([GOC], [Go compiler command])dnl +AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl +_AC_ARG_VAR_LDFLAGS()dnl +AC_CHECK_TOOL(GOC, gccgo) +if test -z "$GOC"; then + if test -n "$ac_tool_prefix"; then + AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) + fi +fi +if test -z "$GOC"; then + AC_CHECK_PROG(GOC, gccgo, gccgo, false) +fi +])#m4_defun +])#m4_ifndef + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([AC_PROG_GO], + [LT_LANG(GO)], + [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "$LT_MULTI_MODULE"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS=$save_LDFLAGS + ]) + + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[[012]][[,.]]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test yes = "$lt_cv_apple_cc_single_mod"; then + _lt_dar_single_mod='$single_module' + fi + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' + fi + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES([TAG]) +# --------------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test yes = "$lt_cv_ld_force_load"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], + [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined + case $cc_basename in + ifort*|nagfor*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test yes = "$_lt_dar_can_shared"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + m4_if([$1], [CXX], +[ if test yes != "$lt_cv_apple_cc_single_mod"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) +# ---------------------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +# Store the results from the different compilers for each TAGNAME. +# Allow to override them for all tags through lt_cv_aix_libpath. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], + [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ + lt_aix_libpath_sed='[ + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }]' + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib + fi + ]) + aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) +fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script that will find a shell with a builtin +# printf (that we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +case $ECHO in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac + +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_WITH_SYSROOT +# ---------------- +AC_DEFUN([_LT_WITH_SYSROOT], +[AC_MSG_CHECKING([for sysroot]) +AC_ARG_WITH([sysroot], +[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@], + [Search for dependent libraries within DIR (or the compiler's sysroot + if not specified).])], +[], [with_sysroot=no]) + +dnl lt_sysroot will always be passed unquoted. We quote it here +dnl in case the user passed a directory name. +lt_sysroot= +case $with_sysroot in #( + yes) + if test yes = "$GCC"; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + AC_MSG_RESULT([$with_sysroot]) + AC_MSG_ERROR([The sysroot must be an absolute path.]) + ;; +esac + + AC_MSG_RESULT([${lt_sysroot:-no}]) +_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl +[dependent libraries, and where our libraries should be installed.])]) + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test no = "$enable_libtool_lock" || enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE=32 + ;; + *ELF-64*) + HPUX_IA64_MODE=64 + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test yes = "$lt_cv_prog_gnu_ld"; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + case `/usr/bin/file conftest.o` in + *x86-64*) + LD="${LD-ld} -m elf32_x86_64" + ;; + *) + LD="${LD-ld} -m elf_i386" + ;; + esac + ;; + powerpc64le-*linux*) + LD="${LD-ld} -m elf32lppclinux" + ;; + powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + powerpcle-*linux*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS=$CFLAGS + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test yes != "$lt_cv_cc_needs_belf"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS=$SAVE_CFLAGS + fi + ;; +*-*solaris*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*|x86_64-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD=${LD-ld}_sol2 + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks=$enable_libtool_lock +])# _LT_ENABLE_LOCK + + +# _LT_PROG_AR +# ----------- +m4_defun([_LT_PROG_AR], +[AC_CHECK_TOOLS(AR, [ar], false) +: ${AR=ar} +: ${AR_FLAGS=cru} +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], + [lt_cv_ar_at_file=no + AC_COMPILE_IFELSE([AC_LANG_PROGRAM], + [echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([lt_ar_try]) + if test 0 -eq "$ac_status"; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + AC_TRY_EVAL([lt_ar_try]) + if test 0 -ne "$ac_status"; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + ]) + ]) + +if test no = "$lt_cv_ar_at_file"; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi +_LT_DECL([], [archiver_list_spec], [1], + [How to feed a file listing to the archiver]) +])# _LT_PROG_AR + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[_LT_PROG_AR + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + bitrig* | openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test yes = "[$]$2"; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS +]) + +if test yes = "[$]$2"; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring=ABCD + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len" && \ + test undefined != "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test 17 != "$i" # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n "$lt_cv_sys_max_cmd_len"; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test yes = "$cross_compiling"; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test yes != "$enable_dlopen"; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen=load_add_on + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen=LoadLibrary + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[ + lt_cv_dlopen=dyld + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen=shl_load], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen=dlopen], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test no = "$lt_cv_dlopen"; then + enable_dlopen=no + else + enable_dlopen=yes + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS=$LDFLAGS + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS=$LIBS + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test yes = "$lt_cv_dlopen_self"; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links=nottested +if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test no = "$hard_links"; then + AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/", + [Define to the sub-directory where libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then + + # We can hardcode non-existent directories. + if test no != "$_LT_TAGVAR(hardcode_direct, $1)" && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" && + test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test relink = "$_LT_TAGVAR(hardcode_action, $1)" || + test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then + # Fast installation is not supported + enable_fast_install=no +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP"; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_PREPARE_MUNGE_PATH_LIST +# --------------------------- +# Make sure func_munge_path_list() is defined correctly. +m4_defun([_LT_PREPARE_MUNGE_PATH_LIST], +[[# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x@S|@2 in + x) + ;; + *:) + eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\" + ;; + x:*) + eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\" + ;; + *) + eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\" + ;; + esac +} +]])# _LT_PREPARE_PATH_LIST + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test yes = "$GCC"; then + case $host_os in + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary... + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo = "/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=.so +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +AC_ARG_VAR([LT_SYS_LIBRARY_PATH], +[User-defined run-time library search path.]) + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='$libname$release$shared_ext$major' + ;; + +aix[[4-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test ia64 = "$host_cpu"; then + # AIX 5 supports IA64 + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a[(]lib.so.V[)]' + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='$libname$shared_ext' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec=$LIB + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[23]].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 + fi + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test yes = "$lt_cv_prog_gnu_ld"; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd* | bitrig*) + version_type=sunos + sys_lib_dlsearch_path_spec=/usr/lib + need_lib_prefix=no + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no + else + need_version=yes + fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +os2*) + libname_spec='$name' + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test yes = "$with_gnu_ld"; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec; then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=sco + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test yes = "$with_gnu_ld"; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test no = "$dynamic_linker" && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test yes = "$GCC"; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec +fi + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec +fi + +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2], + [Detected run-time system search path for libraries]) +_LT_DECL([], [configure_time_lt_sys_library_path], [2], + [Explicit LT_SYS_LIBRARY_PATH set during ./configure time]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program that can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$1"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac]) +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program that can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test no = "$withval" || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test yes = "$GCC"; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return, which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD=$ac_prog + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test yes = "$with_gnu_ld"; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD=$ac_dir/$ac_prog + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd], +[if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi]) +rm -f conftest.i conftest2.i conftest.out]) +])# _LT_PATH_DD + + +# _LT_CMD_TRUNCATE +# ---------------- +# find command to truncate a binary pipe +m4_defun([_LT_CMD_TRUNCATE], +[m4_require([_LT_PATH_DD]) +AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin], +[printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"]) +_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1], + [Command to truncate a binary pipe]) +])# _LT_CMD_TRUNCATE + + +# _LT_CHECK_MAGIC_METHOD +# ---------------------- +# how to check for library dependencies +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_MAGIC_METHOD], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +AC_CACHE_CHECK([how to recognize dependent libraries], +lt_cv_deplibs_check_method, +[lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# 'unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[[4-9]]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[[45]]*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method = "file_magic"]) +_LT_DECL([], [file_magic_glob], [1], + [How to find potential files when deplibs_check_method = "file_magic"]) +_LT_DECL([], [want_nocaseglob], [1], + [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM=$NM +else + lt_nm_to_check=${ac_tool_prefix}nm + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break 2 + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break 2 + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS=$lt_save_ifs + done + : ${lt_cv_path_NM=no} +fi]) +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols -headers" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test : != "$DUMPBIN"; then + NM=$DUMPBIN + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + +# _LT_CHECK_SHAREDLIB_FROM_LINKLIB +# -------------------------------- +# how to determine the name of the shared library +# associated with a specific link library. +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +m4_require([_LT_DECL_DLLTOOL]) +AC_CACHE_CHECK([how to associate runtime and link libraries], +lt_cv_sharedlib_from_linklib_cmd, +[lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd=$ECHO + ;; +esac +]) +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + +_LT_DECL([], [sharedlib_from_linklib_cmd], [1], + [Command to associate shared and link libraries]) +])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB + + +# _LT_PATH_MANIFEST_TOOL +# ---------------------- +# locate the manifest tool +m4_defun([_LT_PATH_MANIFEST_TOOL], +[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&AS_MESSAGE_LOG_FD + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest*]) +if test yes != "$lt_cv_path_mainfest_tool"; then + MANIFEST_TOOL=: +fi +_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl +])# _LT_PATH_MANIFEST_TOOL + + +# _LT_DLL_DEF_P([FILE]) +# --------------------- +# True iff FILE is a Windows DLL '.def' file. +# Keep in sync with func_dll_def_p in the libtool script +AC_DEFUN([_LT_DLL_DEF_P], +[dnl + test DEF = "`$SED -n dnl + -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace + -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments + -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl + -e q dnl Only consider the first "real" line + $1`" dnl +])# _LT_DLL_DEF_P + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw) + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM=-lm) + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test yes = "$GCC"; then + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test ia64 = "$host_cpu"; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT@&t@_DLSYM_CONST +#elif defined __osf__ +/* This system does not cope well with relocations in const data. */ +# define LT@&t@_DLSYM_CONST +#else +# define LT@&t@_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT@&t@_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS=conftstm.$ac_objext + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test yes = "$pipe_works"; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1], + [Transform the output of nm into a list of symbols to manually relocate]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([nm_interface], [lt_cv_nm_interface], [1], + [The name lister interface]) +_LT_DECL([], [nm_file_list_spec], [1], + [Specify filename containing input files for $NM]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test yes = "$GXX"; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' + if test ia64 != "$host_cpu"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64, which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test yes = "$GCC"; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + case $host_os in + os2*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' + ;; + esac + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + # old Intel for x86_64, which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ F* | *Sun*Fortran*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + *Intel*\ [[CF]]*Compiler*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + *Portland\ Group*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms that do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac + +AC_CACHE_CHECK([for $compiler option to produce PIC], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + ;; + esac + ;; + linux* | k*bsd*-gnu | gnu*) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test yes != "$GCC"; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd* | bitrig*) + with_gnu_ld=no + ;; + linux* | k*bsd*-gnu | gnu*) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test yes = "$with_gnu_ld"; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test yes = "$lt_use_gnu_ld_interface"; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='$wl' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test ia64 != "$host_cpu"; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test linux-dietlibc = "$host_os"; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test no = "$tmp_diet" + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + + if test yes = "$supports_anon_versioning"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + tcc*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic' + ;; + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test yes = "$supports_anon_versioning"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then + aix_use_runtimelinking=yes + break + fi + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + ;; + esac + + if test yes = "$GCC"; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + esac + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + ;; + + hpux10*) + if test yes,no = "$GCC,$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test yes,no = "$GCC,$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], + [lt_cv_irix_exported_symbol], + [save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" + AC_LINK_IFELSE( + [AC_LANG_SOURCE( + [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], + [C++], [[int foo (void) { return 0; }]], + [Fortran 77], [[ + subroutine foo + end]], + [Fortran], [[ + subroutine foo + end]])])], + [lt_cv_irix_exported_symbol=yes], + [lt_cv_irix_exported_symbol=no]) + LDFLAGS=$save_LDFLAGS]) + if test yes = "$lt_cv_irix_exported_symbol"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' + fi + _LT_TAGVAR(link_all_deplibs, $1)=no + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + _LT_TAGVAR(ld_shlibs, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd* | bitrig*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + osf3*) + if test yes = "$GCC"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test yes = "$GCC"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test yes = "$GCC"; then + wlarc='$wl' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='$wl' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. GCC discards it without '$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test yes = "$GCC"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test sequent = "$host_vendor"; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test sni = "$host_vendor"; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test yes,yes = "$GCC,$enable_shared"; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting $shlibpath_var if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [postlink_cmds], [2], + [Commands necessary for finishing linking programs]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC=$CC +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report what library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC=$lt_save_CC +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +if test -n "$CXX" && ( test no != "$CXX" && + ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) || + (test g++ != "$CXX"))); then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test yes != "$_lt_caught_CXX_error"; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test yes = "$GXX"; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test yes = "$GXX"; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test yes = "$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='$wl' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + ;; + esac + + if test yes = "$GXX"; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag=$shared_flag' $wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + # The "-G" linker flag allows undefined symbols. + _LT_TAGVAR(no_undefined_flag, $1)='-bernotok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared + # libraries. Need -bnortl late, we may have -brtl in LDFLAGS. + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + shrext_cmds=.dll + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test yes = "$GXX"; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test yes = "$GXX"; then + if test no = "$with_gnu_ld"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + if test yes = "$supports_anon_versioning"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd* | bitrig*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test yes,no = "$GXX,$with_gnu_ld"; then + _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test yes,no = "$GXX,$with_gnu_ld"; then + _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require '-G' NOT '-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no + + _LT_TAGVAR(GCC, $1)=$GXX + _LT_TAGVAR(LD, $1)=$LD + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test yes != "$_lt_caught_CXX_error" + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_FUNC_STRIPNAME_CNF +# ---------------------- +# func_stripname_cnf prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# +# This function is identical to the (non-XSI) version of func_stripname, +# except this one can be used by m4 code that may be executed by configure, +# rather than the libtool script. +m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl +AC_REQUIRE([_LT_DECL_SED]) +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) +func_stripname_cnf () +{ + case @S|@2 in + .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;; + *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;; + esac +} # func_stripname_cnf +])# _LT_FUNC_STRIPNAME_CNF + + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF +package foo +func foo() { +} +_LT_EOF +]) + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac + +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case $prev$p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test x-L = "$p" || + test x-R = "$p"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test no = "$pre_test_object_deps_done"; then + case $prev in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)=$prev$p + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test no = "$pre_test_object_deps_done"; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)=$p + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)=$p + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test no = "$F77"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test yes != "$_lt_disable_F77"; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} + CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)=$G77 + _LT_TAGVAR(LD, $1)=$LD + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test yes != "$_lt_disable_F77" + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test no = "$FC"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test yes != "$_lt_disable_FC"; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu + _LT_TAGVAR(LD, $1)=$LD + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test yes != "$_lt_disable_FC" + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +CFLAGS=$GCJFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)=$LD +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_GO_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Go compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_GO_CONFIG], +[AC_REQUIRE([LT_PROG_GO])dnl +AC_LANG_SAVE + +# Source file extension for Go test sources. +ac_ext=go + +# Object file extension for compiled Go test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="package main; func main() { }" + +# Code to be used in simple link tests +lt_simple_link_test_code='package main; func main() { }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GOC-"gccgo"} +CFLAGS=$GOFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)=$LD +_LT_CC_BASENAME([$compiler]) + +# Go did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GO_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to 'libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code=$lt_simple_compile_test_code + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_GO +# ---------- +AC_DEFUN([LT_PROG_GO], +[AC_CHECK_TOOL(GOC, gccgo,) +]) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + +# _LT_DECL_DLLTOOL +# ---------------- +# Ensure DLLTOOL variable is set. +m4_defun([_LT_DECL_DLLTOOL], +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) +AC_SUBST([DLLTOOL]) +]) + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f "$lt_ac_sed" && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test 10 -lt "$lt_ac_count" && break + lt_ac_count=`expr $lt_ac_count + 1` + if test "$lt_ac_count" -gt "$lt_ac_max"; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PATH_CONVERSION_FUNCTIONS +# ----------------------------- +# Determine what file name conversion functions should be used by +# func_to_host_file (and, implicitly, by func_to_host_path). These are needed +# for certain cross-compile configurations and native mingw. +m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_MSG_CHECKING([how to convert $build file names to $host format]) +AC_CACHE_VAL(lt_cv_to_host_file_cmd, +[case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +]) +to_host_file_cmd=$lt_cv_to_host_file_cmd +AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) +_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], + [0], [convert $build file names to $host format])dnl + +AC_MSG_CHECKING([how to convert $build file names to toolchain format]) +AC_CACHE_VAL(lt_cv_to_tool_file_cmd, +[#assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac +]) +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) +_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], + [0], [convert $build files to toolchain format])dnl +])# _LT_PATH_CONVERSION_FUNCTIONS diff -Nru speex-1.2~rc1.2/m4/lt~obsolete.m4 speex-1.2.0/m4/lt~obsolete.m4 --- speex-1.2~rc1.2/m4/lt~obsolete.m4 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/m4/lt~obsolete.m4 2016-12-07 19:52:48.000000000 +0000 @@ -0,0 +1,99 @@ +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software +# Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN), +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) diff -Nru speex-1.2~rc1.2/m4/ltoptions.m4 speex-1.2.0/m4/ltoptions.m4 --- speex-1.2~rc1.2/m4/ltoptions.m4 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/m4/ltoptions.m4 2016-12-07 19:52:48.000000000 +0000 @@ -0,0 +1,437 @@ +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software +# Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 8 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option '$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl 'shared' nor 'disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4], + [_LT_WITH_AIX_SONAME([aix])]) + ]) +])# _LT_SET_OPTIONS + + +## --------------------------------- ## +## Macros to handle LT_INIT options. ## +## --------------------------------- ## + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the 'dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the 'win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the 'shared' and +# 'disable-shared' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the 'static' and +# 'disable-static' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the 'fast-install' +# and 'disable-fast-install' LT_INIT options. +# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the 'fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the 'disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_AIX_SONAME([DEFAULT]) +# ---------------------------------- +# implement the --with-aix-soname flag, and support the `aix-soname=aix' +# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT +# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'. +m4_define([_LT_WITH_AIX_SONAME], +[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl +shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[[5-9]]*,yes) + AC_MSG_CHECKING([which variant of shared library versioning to provide]) + AC_ARG_WITH([aix-soname], + [AS_HELP_STRING([--with-aix-soname=aix|svr4|both], + [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])], + [case $withval in + aix|svr4|both) + ;; + *) + AC_MSG_ERROR([Unknown argument to --with-aix-soname]) + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname], + [AC_CACHE_VAL([lt_cv_with_aix_soname], + [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT) + with_aix_soname=$lt_cv_with_aix_soname]) + AC_MSG_RESULT([$with_aix_soname]) + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + +_LT_DECL([], [shared_archive_member_spec], [0], + [Shared archive member basename, for filename based shared library versioning on AIX])dnl +])# _LT_WITH_AIX_SONAME + +LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])]) +LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])]) +LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])]) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the 'pic-only' and 'no-pic' +# LT_INIT options. +# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $withval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [pic_mode=m4_default([$1], [default])]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the 'pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + +## ----------------- ## +## LTDL_INIT Options ## +## ----------------- ## + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) diff -Nru speex-1.2~rc1.2/m4/ltsugar.m4 speex-1.2.0/m4/ltsugar.m4 --- speex-1.2~rc1.2/m4/ltsugar.m4 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/m4/ltsugar.m4 2016-12-07 19:52:48.000000000 +0000 @@ -0,0 +1,124 @@ +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software +# Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59, which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) diff -Nru speex-1.2~rc1.2/m4/ltversion.m4 speex-1.2.0/m4/ltversion.m4 --- speex-1.2~rc1.2/m4/ltversion.m4 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/m4/ltversion.m4 2016-12-07 19:52:48.000000000 +0000 @@ -0,0 +1,23 @@ +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# @configure_input@ + +# serial 4179 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.4.6]) +m4_define([LT_PACKAGE_REVISION], [2.4.6]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.4.6' +macro_revision='2.4.6' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) diff -Nru speex-1.2~rc1.2/m4/pkg.m4 speex-1.2.0/m4/pkg.m4 --- speex-1.2~rc1.2/m4/pkg.m4 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/m4/pkg.m4 2015-07-06 15:02:13.000000000 +0000 @@ -0,0 +1,272 @@ +# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +# serial 1 (pkg-config-0.24) +# +# Copyright © 2004 Scott James Remnant . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# PKG_PROG_PKG_CONFIG([MIN-VERSION]) +# ---------------------------------- +AC_DEFUN([PKG_PROG_PKG_CONFIG], +[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) +m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) +AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) +AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) +AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=m4_default([$1], [0.9.0]) + AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + PKG_CONFIG="" + fi +fi[]dnl +])# PKG_PROG_PKG_CONFIG + +# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +# +# Check to see whether a particular set of modules exists. Similar +# to PKG_CHECK_MODULES(), but does not set variables or print errors. +# +# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +# only at the first occurence in configure.ac, so if the first place +# it's called might be skipped (such as if it is within an "if", you +# have to call PKG_CHECK_EXISTS manually +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_EXISTS], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +if test -n "$PKG_CONFIG" && \ + AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then + m4_default([$2], [:]) +m4_ifvaln([$3], [else + $3])dnl +fi]) + +# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +# --------------------------------------------- +m4_define([_PKG_CONFIG], +[if test -n "$$1"; then + pkg_cv_[]$1="$$1" + elif test -n "$PKG_CONFIG"; then + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes ], + [pkg_failed=yes]) + else + pkg_failed=untried +fi[]dnl +])# _PKG_CONFIG + +# _PKG_SHORT_ERRORS_SUPPORTED +# ----------------------------- +AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi[]dnl +])# _PKG_SHORT_ERRORS_SUPPORTED + + +# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +# [ACTION-IF-NOT-FOUND]) +# +# +# Note that if there is a possibility the first call to +# PKG_CHECK_MODULES might not happen, you should be sure to include an +# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac +# +# +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_MODULES], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +pkg_failed=no +AC_MSG_CHECKING([for $1]) + +_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +and $1[]_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details.]) + +if test $pkg_failed = yes; then + AC_MSG_RESULT([no]) + _PKG_SHORT_ERRORS_SUPPORTED + if test $_pkg_short_errors_supported = yes; then + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` + else + $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + + m4_default([$4], [AC_MSG_ERROR( +[Package requirements ($2) were not met: + +$$1_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +_PKG_TEXT])[]dnl + ]) +elif test $pkg_failed = untried; then + AC_MSG_RESULT([no]) + m4_default([$4], [AC_MSG_FAILURE( +[The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +_PKG_TEXT + +To get pkg-config, see .])[]dnl + ]) +else + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + AC_MSG_RESULT([yes]) + $3 +fi[]dnl +])# PKG_CHECK_MODULES + +# PKG_INSTALLDIR(DIRECTORY) +# ------------------------- +# Substitutes the variable pkgconfigdir as the location where a module +# should install pkg-config .pc files. By default the directory is +# $libdir/pkgconfig, but the default can be changed by passing +# DIRECTORY. The user can override through the --with-pkgconfigdir +# parameter. +AC_DEFUN([PKG_INSTALLDIR], +[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) +m4_pushdef([pkg_description], + [pkg-config installation directory @<:@]pkg_default[@:>@]) +AC_ARG_WITH([pkgconfigdir], + [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, + [with_pkgconfigdir=]pkg_default) +AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) +m4_popdef([pkg_default]) +m4_popdef([pkg_description]) +]) dnl PKG_INSTALLDIR + + +# PKG_NOARCH_INSTALLDIR(DIRECTORY) +# ------------------------- +# Substitutes the variable noarch_pkgconfigdir as the location where a +# module should install arch-independent pkg-config .pc files. By +# default the directory is $datadir/pkgconfig, but the default can be +# changed by passing DIRECTORY. The user can override through the +# --with-noarch-pkgconfigdir parameter. +AC_DEFUN([PKG_NOARCH_INSTALLDIR], +[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) +m4_pushdef([pkg_description], + [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) +AC_ARG_WITH([noarch-pkgconfigdir], + [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, + [with_noarch_pkgconfigdir=]pkg_default) +AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) +m4_popdef([pkg_default]) +m4_popdef([pkg_description]) +]) dnl PKG_NOARCH_INSTALLDIR + +# PKG_WITH_MODULES(VARIABLE-PREFIX, MODULES, +# [ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND], +# [DESCRIPTION], [DEFAULT]) +# +# Prepare a "--with-" configure option using the lowercase [VARIABLE-PREFIX] +# name, merging the behaviour of AC_ARG_WITH and PKG_CHECK_MODULES in a single +# macro +# +# -------------------------------------------------------------- +AC_DEFUN([PKG_WITH_MODULES], +[ +m4_pushdef([with_arg], m4_tolower([$1])) + +m4_pushdef([description], + [m4_default([$5], [build with ]with_arg[ support])]) + +m4_pushdef([def_arg], [m4_default([$6], [auto])]) +m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes]) +m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no]) + +m4_case(def_arg, + [yes],[m4_pushdef([with_without], [--without-]with_arg)], + [m4_pushdef([with_without],[--with-]with_arg)]) + +AC_ARG_WITH(with_arg, + AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),, + [AS_TR_SH([with_]with_arg)=def_arg]) + +AS_CASE([$AS_TR_SH([with_]with_arg)], + [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)], + [auto],[PKG_CHECK_MODULES([$1],[$2], + [m4_n([def_action_if_found]) $3], + [m4_n([def_action_if_not_found]) $4])]) + +m4_popdef([with_arg]) +m4_popdef([description]) +m4_popdef([def_arg]) + +]) dnl PKG_WITH_MODULES + +# PKG_HAVE_WITH_MODULES(VARIABLE-PREFIX, MODULES, +# [DESCRIPTION], [DEFAULT]) +# +# Convenience macro to trigger AM_CONDITIONAL after +# PKG_WITH_MODULES check. +# +# HAVE_[VARIABLE-PREFIX] is exported as make variable. +# +# -------------------------------------------------------------- +AC_DEFUN([PKG_HAVE_WITH_MODULES], +[ +PKG_WITH_MODULES([$1],[$2],,,[$3],[$4]) + +AM_CONDITIONAL([HAVE_][$1], + [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"]) +]) + +# PKG_HAVE_DEFINE_WITH_MODULES(VARIABLE-PREFIX, MODULES, +# [DESCRIPTION], [DEFAULT]) +# +# Convenience macro to run AM_CONDITIONAL and AC_DEFINE after +# PKG_WITH_MODULES check. +# +# HAVE_[VARIABLE-PREFIX] is exported as make and preprocessor variable. +# +# -------------------------------------------------------------- +AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES], +[ +PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4]) + +AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"], + [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])]) +]) diff -Nru speex-1.2~rc1.2/Makefile.am speex-1.2.0/Makefile.am --- speex-1.2~rc1.2/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/Makefile.am 2015-07-06 15:02:11.000000000 +0000 @@ -3,17 +3,22 @@ # To disable automatic dependency tracking if using other tools than # gcc and gmake, add the option 'no-dependencies' AUTOMAKE_OPTIONS = 1.8 +ACLOCAL_AMFLAGS = -I m4 m4datadir = $(datadir)/aclocal m4data_DATA = speex.m4 pkgconfigdir = $(libdir)/pkgconfig -pkgconfig_DATA = speex.pc speexdsp.pc +pkgconfig_DATA = speex.pc EXTRA_DIST = Speex.spec Speex.spec.in Speex.kdevelop speex.m4 speex.pc.in README.blackfin README.symbian README.TI-DSP #Fools KDevelop into including all files -SUBDIRS = libspeex include @src@ doc win32 symbian ti +SUBDIRS = libspeex include doc win32 symbian ti + +if BUILD_BINARIES +SUBDIRS += src +endif DIST_SUBDIRS = libspeex include src doc win32 symbian ti diff -Nru speex-1.2~rc1.2/Makefile.in speex-1.2.0/Makefile.in --- speex-1.2~rc1.2/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -15,7 +15,17 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -78,23 +88,23 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ +@BUILD_BINARIES_TRUE@am__append_1 = src subdir = . -DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \ - $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/configure $(am__configure_deps) \ - $(srcdir)/config.h.in $(srcdir)/speex.pc.in \ - $(srcdir)/speexdsp.pc.in COPYING TODO compile config.guess \ - config.sub depcomp install-sh missing ltmain.sh ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = speex.pc speexdsp.pc +CONFIG_CLEAN_FILES = Speex.spec speex.pc CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) @@ -181,6 +191,10 @@ ETAGS = etags CTAGS = ctags CSCOPE = cscope +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Speex.spec.in \ + $(srcdir)/config.h.in $(srcdir)/speex.pc.in AUTHORS COPYING \ + ChangeLog INSTALL NEWS README TODO compile config.guess \ + config.sub depcomp install-sh ltmain.sh missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) @@ -253,6 +267,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -260,12 +275,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -295,12 +312,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -345,9 +367,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -358,14 +380,15 @@ # To disable automatic dependency tracking if using other tools than # gcc and gmake, add the option 'no-dependencies' AUTOMAKE_OPTIONS = 1.8 +ACLOCAL_AMFLAGS = -I m4 m4datadir = $(datadir)/aclocal m4data_DATA = speex.m4 pkgconfigdir = $(libdir)/pkgconfig -pkgconfig_DATA = speex.pc speexdsp.pc +pkgconfig_DATA = speex.pc EXTRA_DIST = Speex.spec Speex.spec.in Speex.kdevelop speex.m4 speex.pc.in README.blackfin README.symbian README.TI-DSP #Fools KDevelop into including all files -SUBDIRS = libspeex include @src@ doc win32 symbian ti +SUBDIRS = libspeex include doc win32 symbian ti $(am__append_1) DIST_SUBDIRS = libspeex include src doc win32 symbian ti all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive @@ -377,16 +400,15 @@ @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -420,9 +442,9 @@ distclean-hdr: -rm -f config.h stamp-h1 -speex.pc: $(top_builddir)/config.status $(srcdir)/speex.pc.in +Speex.spec: $(top_builddir)/config.status $(srcdir)/Speex.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ -speexdsp.pc: $(top_builddir)/config.status $(srcdir)/speexdsp.pc.in +speex.pc: $(top_builddir)/config.status $(srcdir)/speex.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: @@ -663,15 +685,15 @@ $(am__post_remove_distdir) dist-tarZ: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) @@ -707,17 +729,17 @@ esac chmod -R a-w $(distdir) chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_inst + mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure \ + && $(am__cd) $(distdir)/_build/sub \ + && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=.. --prefix="$$dc_install_base" \ + --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ @@ -898,6 +920,8 @@ tags tags-am uninstall uninstall-am uninstall-m4dataDATA \ uninstall-pkgconfigDATA +.PRECIOUS: Makefile + rpm: dist rpmbuild -ta ${PACKAGE}-${VERSION}.tar.gz diff -Nru speex-1.2~rc1.2/missing speex-1.2.0/missing --- speex-1.2~rc1.2/missing 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/missing 2016-12-07 19:52:53.000000000 +0000 @@ -3,7 +3,7 @@ scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify diff -Nru speex-1.2~rc1.2/README.blackfin speex-1.2.0/README.blackfin --- speex-1.2~rc1.2/README.blackfin 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/README.blackfin 2015-07-06 15:02:11.000000000 +0000 @@ -12,10 +12,10 @@ The --enable-blackfin-asm option is not required, but it speeds up Speex by approximately a factor of two. -2/ In order to cross-compile for uClinux from the Speex SVN: +2/ In order to cross-compile for uClinux from the Speex Git: - svn co http://svn.xiph.org/trunk/speex speex-trunk - cd speex-trunk + git clone git://git.xiph.org/speex.git + cd speex ./autogen.sh --enable-blackfin-asm --enable-fixed-point --host=bfin-uclinux cd libspeex make diff -Nru speex-1.2~rc1.2/speexdsp.pc.in speex-1.2.0/speexdsp.pc.in --- speex-1.2~rc1.2/speexdsp.pc.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/speexdsp.pc.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,15 +0,0 @@ -# libspeexdsp pkg-config source file - -prefix=@prefix@ -exec_prefix=@exec_prefix@ -libdir=@libdir@ -includedir=@includedir@ - -Name: speexdsp -Description: Speexdsp is a speech processing library that goes along with the Speex codec -Version: @SPEEX_VERSION@ -Requires: @FFT_PKGCONFIG@ -Conflicts: -Libs: -L${libdir} -lspeexdsp -Libs.private: -lm -Cflags: -I${includedir} diff -Nru speex-1.2~rc1.2/speex.pc.in speex-1.2.0/speex.pc.in --- speex-1.2~rc1.2/speex.pc.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/speex.pc.in 2015-07-06 15:01:57.000000000 +0000 @@ -11,5 +11,5 @@ Requires: Conflicts: Libs: -L${libdir} -lspeex -Libs.private: -lm +Libs.private: @LIBM@ Cflags: -I${includedir} diff -Nru speex-1.2~rc1.2/Speex.spec speex-1.2.0/Speex.spec --- speex-1.2~rc1.2/Speex.spec 1970-01-01 00:00:00.000000000 +0000 +++ speex-1.2.0/Speex.spec 2016-12-07 23:21:07.000000000 +0000 @@ -0,0 +1,71 @@ +%define name speex +%define ver 1.2.0 +%define rel 1 + +Summary: An open-source, patent-free speech codec +Name: %name +Version: %ver +Release: %rel +License: BSD +Group: Application/Devel +Source: http://www.speex.org/download/%{name}-%{ver}.tar.gz +URL: http://www.speex.org/ +Vendor: Speex +Packager: Jean-Marc Valin (jean-marc.valin@usherbrooke.ca) +BuildRoot: /var/tmp/%{name}-build-root +Docdir: /usr/share/doc + +%description +Speex is a patent-free audio codec designed especially for voice (unlike +Vorbis which targets general audio) signals and providing good narrowband +and wideband quality. This project aims to be complementary to the Vorbis +codec. + +%package devel +Summary: Speex development files +Group: Development/Libraries +Requires: %{name} = %{version} + +%description devel +Speex development files. + +%changelog +* Thu Oct 03 2002 Jean-Marc Valin +- Added devel package inspired from PLD spec file + +* Tue Jul 30 2002 Fredrik Rambris 0.5.2 +- Added buildroot and docdir and ldconfig. Makes it builadble by non-roots + and also doesn't write to actual library paths when building. + +%prep +%setup + +%build +export CFLAGS='-O3' +./configure --prefix=/usr --enable-shared --enable-static +make + +%install +rm -rf $RPM_BUILD_ROOT +make DESTDIR=$RPM_BUILD_ROOT install + +%post -p /sbin/ldconfig +%postun -p /sbin/ldconfig + +%files +%defattr(644,root,root,755) +%doc COPYING AUTHORS ChangeLog NEWS README +%doc doc/manual.pdf +/usr/share/man/man1/speexenc.1* +/usr/share/man/man1/speexdec.1* +%attr(755,root,root) %{_bindir}/speex* +%attr(755,root,root) %{_libdir}/libspeex*.so* + +%files devel +%defattr(644,root,root,755) +%attr(755,root,root) %{_libdir}/libspeex*.la +%{_includedir}/speex/speex*.h +/usr/share/aclocal/speex.m4 +%{_libdir}/pkgconfig/speex.pc +%{_libdir}/pkgconfig/speexdsp.pc +%{_libdir}/libspeex*.a diff -Nru speex-1.2~rc1.2/src/getopt1.c speex-1.2.0/src/getopt1.c --- speex-1.2~rc1.2/src/getopt1.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/src/getopt1.c 2015-07-06 15:02:09.000000000 +0000 @@ -1,188 +1,188 @@ -/* getopt_long and getopt_long_only entry points for GNU getopt. - Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98 - Free Software Foundation, Inc. - This file is part of the GNU C Library. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with the GNU C Library; see the file COPYING.LIB. If not, - write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "getopt_win.h" - -#if !defined __STDC__ || !__STDC__ -/* This is a separate conditional since some stdc systems - reject `defined (const)'. */ -#ifndef const -#define const -#endif -#endif - -#include - -/* Comment out all this code if we are using the GNU C Library, and are not - actually compiling the library itself. This code is part of the GNU C - Library, but also included in many other GNU distributions. Compiling - and linking in this code is a waste when using the GNU C library - (especially if it is a shared library). Rather than having every GNU - program understand `configure --with-gnu-libc' and omit the object files, - it is simpler to just do this in the source for each such file. */ - -#define GETOPT_INTERFACE_VERSION 2 -#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2 -#include -#if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION -#define ELIDE_CODE -#endif -#endif - -#ifndef ELIDE_CODE - - -/* This needs to come after some library #include - to get __GNU_LIBRARY__ defined. */ -#ifdef __GNU_LIBRARY__ -#include -#endif - -#ifndef NULL -#define NULL 0 -#endif - -int -getopt_long (argc, argv, options, long_options, opt_index) - int argc; - char *const *argv; - const char *options; - const struct option *long_options; - int *opt_index; -{ - return _getopt_internal (argc, argv, options, long_options, opt_index, 0); -} - -/* Like getopt_long, but '-' as well as '--' can indicate a long option. - If an option that starts with '-' (not '--') doesn't match a long option, - but does match a short option, it is parsed as a short option - instead. */ - -int -getopt_long_only (argc, argv, options, long_options, opt_index) - int argc; - char *const *argv; - const char *options; - const struct option *long_options; - int *opt_index; -{ - return _getopt_internal (argc, argv, options, long_options, opt_index, 1); -} - - -#endif /* Not ELIDE_CODE. */ - -#ifdef TEST - -#include - -int -main (argc, argv) - int argc; - char **argv; -{ - int c; - int digit_optind = 0; - - while (1) - { - int this_option_optind = optind ? optind : 1; - int option_index = 0; - static struct option long_options[] = - { - {"add", 1, 0, 0}, - {"append", 0, 0, 0}, - {"delete", 1, 0, 0}, - {"verbose", 0, 0, 0}, - {"create", 0, 0, 0}, - {"file", 1, 0, 0}, - {0, 0, 0, 0} - }; - - c = getopt_long (argc, argv, "abc:d:0123456789", - long_options, &option_index); - if (c == -1) - break; - - switch (c) - { - case 0: - printf ("option %s", long_options[option_index].name); - if (optarg) - printf (" with arg %s", optarg); - printf ("\n"); - break; - - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - case '8': - case '9': - if (digit_optind != 0 && digit_optind != this_option_optind) - printf ("digits occur in two different argv-elements.\n"); - digit_optind = this_option_optind; - printf ("option %c\n", c); - break; - - case 'a': - printf ("option a\n"); - break; - - case 'b': - printf ("option b\n"); - break; - - case 'c': - printf ("option c with value `%s'\n", optarg); - break; - - case 'd': - printf ("option d with value `%s'\n", optarg); - break; - - case '?': - break; - - default: - printf ("?? getopt returned character code 0%o ??\n", c); - } - } - - if (optind < argc) - { - printf ("non-option ARGV-elements: "); - while (optind < argc) - printf ("%s ", argv[optind++]); - printf ("\n"); - } - - exit (0); -} - -#endif /* TEST */ +/* getopt_long and getopt_long_only entry points for GNU getopt. + Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98 + Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If not, + write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "getopt_win.h" + +#if !defined __STDC__ || !__STDC__ +/* This is a separate conditional since some stdc systems + reject `defined (const)'. */ +#ifndef const +#define const +#endif +#endif + +#include + +/* Comment out all this code if we are using the GNU C Library, and are not + actually compiling the library itself. This code is part of the GNU C + Library, but also included in many other GNU distributions. Compiling + and linking in this code is a waste when using the GNU C library + (especially if it is a shared library). Rather than having every GNU + program understand `configure --with-gnu-libc' and omit the object files, + it is simpler to just do this in the source for each such file. */ + +#define GETOPT_INTERFACE_VERSION 2 +#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2 +#include +#if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION +#define ELIDE_CODE +#endif +#endif + +#ifndef ELIDE_CODE + + +/* This needs to come after some library #include + to get __GNU_LIBRARY__ defined. */ +#ifdef __GNU_LIBRARY__ +#include +#endif + +#ifndef NULL +#define NULL 0 +#endif + +int +getopt_long (argc, argv, options, long_options, opt_index) + int argc; + char *const *argv; + const char *options; + const struct option *long_options; + int *opt_index; +{ + return _getopt_internal (argc, argv, options, long_options, opt_index, 0); +} + +/* Like getopt_long, but '-' as well as '--' can indicate a long option. + If an option that starts with '-' (not '--') doesn't match a long option, + but does match a short option, it is parsed as a short option + instead. */ + +int +getopt_long_only (argc, argv, options, long_options, opt_index) + int argc; + char *const *argv; + const char *options; + const struct option *long_options; + int *opt_index; +{ + return _getopt_internal (argc, argv, options, long_options, opt_index, 1); +} + + +#endif /* Not ELIDE_CODE. */ + +#ifdef TEST + +#include + +int +main (argc, argv) + int argc; + char **argv; +{ + int c; + int digit_optind = 0; + + while (1) + { + int this_option_optind = optind ? optind : 1; + int option_index = 0; + static struct option long_options[] = + { + {"add", 1, 0, 0}, + {"append", 0, 0, 0}, + {"delete", 1, 0, 0}, + {"verbose", 0, 0, 0}, + {"create", 0, 0, 0}, + {"file", 1, 0, 0}, + {0, 0, 0, 0} + }; + + c = getopt_long (argc, argv, "abc:d:0123456789", + long_options, &option_index); + if (c == -1) + break; + + switch (c) + { + case 0: + printf ("option %s", long_options[option_index].name); + if (optarg) + printf (" with arg %s", optarg); + printf ("\n"); + break; + + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + case '8': + case '9': + if (digit_optind != 0 && digit_optind != this_option_optind) + printf ("digits occur in two different argv-elements.\n"); + digit_optind = this_option_optind; + printf ("option %c\n", c); + break; + + case 'a': + printf ("option a\n"); + break; + + case 'b': + printf ("option b\n"); + break; + + case 'c': + printf ("option c with value `%s'\n", optarg); + break; + + case 'd': + printf ("option d with value `%s'\n", optarg); + break; + + case '?': + break; + + default: + printf ("?? getopt returned character code 0%o ??\n", c); + } + } + + if (optind < argc) + { + printf ("non-option ARGV-elements: "); + while (optind < argc) + printf ("%s ", argv[optind++]); + printf ("\n"); + } + + exit (0); +} + +#endif /* TEST */ diff -Nru speex-1.2~rc1.2/src/getopt.c speex-1.2.0/src/getopt.c --- speex-1.2~rc1.2/src/getopt.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/src/getopt.c 2015-07-06 15:02:09.000000000 +0000 @@ -1,1047 +1,1047 @@ -/* Getopt for GNU. - NOTE: getopt is now part of the C library, so if you don't know what - "Keep this file name-space clean" means, talk to drepper@gnu.org - before changing it! - - Copyright (C) 1987, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 - Free Software Foundation, Inc. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with the GNU C Library; see the file COPYING.LIB. If not, - write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -/* This tells Alpha OSF/1 not to define a getopt prototype in . - Ditto for AIX 3.2 and . */ -#ifndef _NO_PROTO -# define _NO_PROTO -#endif - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#if !defined __STDC__ || !__STDC__ -/* This is a separate conditional since some stdc systems - reject `defined (const)'. */ -# ifndef const -# define const -# endif -#endif - -#include - -/* Comment out all this code if we are using the GNU C Library, and are not - actually compiling the library itself. This code is part of the GNU C - Library, but also included in many other GNU distributions. Compiling - and linking in this code is a waste when using the GNU C library - (especially if it is a shared library). Rather than having every GNU - program understand `configure --with-gnu-libc' and omit the object files, - it is simpler to just do this in the source for each such file. */ - -#define GETOPT_INTERFACE_VERSION 2 -#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2 -# include -# if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION -# define ELIDE_CODE -# endif -#endif - -#ifndef ELIDE_CODE - - -/* This needs to come after some library #include - to get __GNU_LIBRARY__ defined. */ -#ifdef __GNU_LIBRARY__ -/* Don't include stdlib.h for non-GNU C libraries because some of them - contain conflicting prototypes for getopt. */ -# include -# include -#endif /* GNU C library. */ - -#ifdef VMS -# include -# if HAVE_STRING_H - 0 -# include -# endif -#endif - -#ifndef _ -/* This is for other GNU distributions with internationalized messages. - When compiling libc, the _ macro is predefined. */ -# ifdef HAVE_LIBINTL_H -# include -# define _(msgid) gettext (msgid) -# else -# define _(msgid) (msgid) -# endif -#endif - -/* This version of `getopt' appears to the caller like standard Unix `getopt' - but it behaves differently for the user, since it allows the user - to intersperse the options with the other arguments. - - As `getopt' works, it permutes the elements of ARGV so that, - when it is done, all the options precede everything else. Thus - all application programs are extended to handle flexible argument order. - - Setting the environment variable POSIXLY_CORRECT disables permutation. - Then the behavior is completely standard. - - GNU application programs can use a third alternative mode in which - they can distinguish the relative order of options and other arguments. */ - -#include "getopt_win.h" - -/* For communication from `getopt' to the caller. - When `getopt' finds an option that takes an argument, - the argument value is returned here. - Also, when `ordering' is RETURN_IN_ORDER, - each non-option ARGV-element is returned here. */ - -char *optarg; - -/* Index in ARGV of the next element to be scanned. - This is used for communication to and from the caller - and for communication between successive calls to `getopt'. - - On entry to `getopt', zero means this is the first call; initialize. - - When `getopt' returns -1, this is the index of the first of the - non-option elements that the caller should itself scan. - - Otherwise, `optind' communicates from one call to the next - how much of ARGV has been scanned so far. */ - -/* 1003.2 says this must be 1 before any call. */ -int optind = 1; - -/* Formerly, initialization of getopt depended on optind==0, which - causes problems with re-calling getopt as programs generally don't - know that. */ - -int __getopt_initialized; - -/* The next char to be scanned in the option-element - in which the last option character we returned was found. - This allows us to pick up the scan where we left off. - - If this is zero, or a null string, it means resume the scan - by advancing to the next ARGV-element. */ - -static char *nextchar; - -/* Callers store zero here to inhibit the error message - for unrecognized options. */ - -int opterr = 1; - -/* Set to an option character which was unrecognized. - This must be initialized on some systems to avoid linking in the - system's own getopt implementation. */ - -int optopt = '?'; - -/* Describe how to deal with options that follow non-option ARGV-elements. - - If the caller did not specify anything, - the default is REQUIRE_ORDER if the environment variable - POSIXLY_CORRECT is defined, PERMUTE otherwise. - - REQUIRE_ORDER means don't recognize them as options; - stop option processing when the first non-option is seen. - This is what Unix does. - This mode of operation is selected by either setting the environment - variable POSIXLY_CORRECT, or using `+' as the first character - of the list of option characters. - - PERMUTE is the default. We permute the contents of ARGV as we scan, - so that eventually all the non-options are at the end. This allows options - to be given in any order, even with programs that were not written to - expect this. - - RETURN_IN_ORDER is an option available to programs that were written - to expect options and other ARGV-elements in any order and that care about - the ordering of the two. We describe each non-option ARGV-element - as if it were the argument of an option with character code 1. - Using `-' as the first character of the list of option characters - selects this mode of operation. - - The special argument `--' forces an end of option-scanning regardless - of the value of `ordering'. In the case of RETURN_IN_ORDER, only - `--' can cause `getopt' to return -1 with `optind' != ARGC. */ - -static enum -{ - REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER -} ordering; - -/* Value of POSIXLY_CORRECT environment variable. */ -static char *posixly_correct; - -#ifdef __GNU_LIBRARY__ -/* We want to avoid inclusion of string.h with non-GNU libraries - because there are many ways it can cause trouble. - On some systems, it contains special magic macros that don't work - in GCC. */ -# include -# define my_index strchr -#else - -#include - -/* Avoid depending on library functions or files - whose names are inconsistent. */ - -#ifndef getenv -extern char *getenv (); -#endif - -static char * -my_index (str, chr) - const char *str; - int chr; -{ - while (*str) - { - if (*str == chr) - return (char *) str; - str++; - } - return 0; -} - -/* If using GCC, we can safely declare strlen this way. - If not using GCC, it is ok not to declare it. */ -#ifdef __GNUC__ -/* Note that Motorola Delta 68k R3V7 comes with GCC but not stddef.h. - That was relevant to code that was here before. */ -# if (!defined __STDC__ || !__STDC__) && !defined strlen -/* gcc with -traditional declares the built-in strlen to return int, - and has done so at least since version 2.4.5. -- rms. */ -extern int strlen (const char *); -# endif /* not __STDC__ */ -#endif /* __GNUC__ */ - -#endif /* not __GNU_LIBRARY__ */ - -/* Handle permutation of arguments. */ - -/* Describe the part of ARGV that contains non-options that have - been skipped. `first_nonopt' is the index in ARGV of the first of them; - `last_nonopt' is the index after the last of them. */ - -static int first_nonopt; -static int last_nonopt; - -#ifdef _LIBC -/* Bash 2.0 gives us an environment variable containing flags - indicating ARGV elements that should not be considered arguments. */ - -/* Defined in getopt_init.c */ -extern char *__getopt_nonoption_flags; - -static int nonoption_flags_max_len; -static int nonoption_flags_len; - -static int original_argc; -static char *const *original_argv; - -/* Make sure the environment variable bash 2.0 puts in the environment - is valid for the getopt call we must make sure that the ARGV passed - to getopt is that one passed to the process. */ -static void -__attribute__ ((unused)) -store_args_and_env (int argc, char *const *argv) -{ - /* XXX This is no good solution. We should rather copy the args so - that we can compare them later. But we must not use malloc(3). */ - original_argc = argc; - original_argv = argv; -} -# ifdef text_set_element -text_set_element (__libc_subinit, store_args_and_env); -# endif /* text_set_element */ - -# define SWAP_FLAGS(ch1, ch2) \ - if (nonoption_flags_len > 0) \ - { \ - char __tmp = __getopt_nonoption_flags[ch1]; \ - __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2]; \ - __getopt_nonoption_flags[ch2] = __tmp; \ - } -#else /* !_LIBC */ -# define SWAP_FLAGS(ch1, ch2) -#endif /* _LIBC */ - -/* Exchange two adjacent subsequences of ARGV. - One subsequence is elements [first_nonopt,last_nonopt) - which contains all the non-options that have been skipped so far. - The other is elements [last_nonopt,optind), which contains all - the options processed since those non-options were skipped. - - `first_nonopt' and `last_nonopt' are relocated so that they describe - the new indices of the non-options in ARGV after they are moved. */ - -#if defined __STDC__ && __STDC__ -static void exchange (char **); -#endif - -static void -exchange (argv) - char **argv; -{ - int bottom = first_nonopt; - int middle = last_nonopt; - int top = optind; - char *tem; - - /* Exchange the shorter segment with the far end of the longer segment. - That puts the shorter segment into the right place. - It leaves the longer segment in the right place overall, - but it consists of two parts that need to be swapped next. */ - -#ifdef _LIBC - /* First make sure the handling of the `__getopt_nonoption_flags' - string can work normally. Our top argument must be in the range - of the string. */ - if (nonoption_flags_len > 0 && top >= nonoption_flags_max_len) - { - /* We must extend the array. The user plays games with us and - presents new arguments. */ - char *new_str = malloc (top + 1); - if (new_str == NULL) - nonoption_flags_len = nonoption_flags_max_len = 0; - else - { - memset (__mempcpy (new_str, __getopt_nonoption_flags, - nonoption_flags_max_len), - '\0', top + 1 - nonoption_flags_max_len); - nonoption_flags_max_len = top + 1; - __getopt_nonoption_flags = new_str; - } - } -#endif - - while (top > middle && middle > bottom) - { - if (top - middle > middle - bottom) - { - /* Bottom segment is the short one. */ - int len = middle - bottom; - register int i; - - /* Swap it with the top part of the top segment. */ - for (i = 0; i < len; i++) - { - tem = argv[bottom + i]; - argv[bottom + i] = argv[top - (middle - bottom) + i]; - argv[top - (middle - bottom) + i] = tem; - SWAP_FLAGS (bottom + i, top - (middle - bottom) + i); - } - /* Exclude the moved bottom segment from further swapping. */ - top -= len; - } - else - { - /* Top segment is the short one. */ - int len = top - middle; - register int i; - - /* Swap it with the bottom part of the bottom segment. */ - for (i = 0; i < len; i++) - { - tem = argv[bottom + i]; - argv[bottom + i] = argv[middle + i]; - argv[middle + i] = tem; - SWAP_FLAGS (bottom + i, middle + i); - } - /* Exclude the moved top segment from further swapping. */ - bottom += len; - } - } - - /* Update records for the slots the non-options now occupy. */ - - first_nonopt += (optind - last_nonopt); - last_nonopt = optind; -} - -/* Initialize the internal data when the first call is made. */ - -#if defined __STDC__ && __STDC__ -static const char *_getopt_initialize (int, char *const *, const char *); -#endif -static const char * -_getopt_initialize (argc, argv, optstring) - int argc; - char *const *argv; - const char *optstring; -{ - /* Start processing options with ARGV-element 1 (since ARGV-element 0 - is the program name); the sequence of previously skipped - non-option ARGV-elements is empty. */ - - first_nonopt = last_nonopt = optind; - - nextchar = NULL; - - posixly_correct = getenv ("POSIXLY_CORRECT"); - - /* Determine how to handle the ordering of options and nonoptions. */ - - if (optstring[0] == '-') - { - ordering = RETURN_IN_ORDER; - ++optstring; - } - else if (optstring[0] == '+') - { - ordering = REQUIRE_ORDER; - ++optstring; - } - else if (posixly_correct != NULL) - ordering = REQUIRE_ORDER; - else - ordering = PERMUTE; - -#ifdef _LIBC - if (posixly_correct == NULL - && argc == original_argc && argv == original_argv) - { - if (nonoption_flags_max_len == 0) - { - if (__getopt_nonoption_flags == NULL - || __getopt_nonoption_flags[0] == '\0') - nonoption_flags_max_len = -1; - else - { - const char *orig_str = __getopt_nonoption_flags; - int len = nonoption_flags_max_len = strlen (orig_str); - if (nonoption_flags_max_len < argc) - nonoption_flags_max_len = argc; - __getopt_nonoption_flags = - (char *) malloc (nonoption_flags_max_len); - if (__getopt_nonoption_flags == NULL) - nonoption_flags_max_len = -1; - else - memset (__mempcpy (__getopt_nonoption_flags, orig_str, len), - '\0', nonoption_flags_max_len - len); - } - } - nonoption_flags_len = nonoption_flags_max_len; - } - else - nonoption_flags_len = 0; -#endif - - return optstring; -} - -/* Scan elements of ARGV (whose length is ARGC) for option characters - given in OPTSTRING. - - If an element of ARGV starts with '-', and is not exactly "-" or "--", - then it is an option element. The characters of this element - (aside from the initial '-') are option characters. If `getopt' - is called repeatedly, it returns successively each of the option characters - from each of the option elements. - - If `getopt' finds another option character, it returns that character, - updating `optind' and `nextchar' so that the next call to `getopt' can - resume the scan with the following option character or ARGV-element. - - If there are no more option characters, `getopt' returns -1. - Then `optind' is the index in ARGV of the first ARGV-element - that is not an option. (The ARGV-elements have been permuted - so that those that are not options now come last.) - - OPTSTRING is a string containing the legitimate option characters. - If an option character is seen that is not listed in OPTSTRING, - return '?' after printing an error message. If you set `opterr' to - zero, the error message is suppressed but we still return '?'. - - If a char in OPTSTRING is followed by a colon, that means it wants an arg, - so the following text in the same ARGV-element, or the text of the following - ARGV-element, is returned in `optarg'. Two colons mean an option that - wants an optional arg; if there is text in the current ARGV-element, - it is returned in `optarg', otherwise `optarg' is set to zero. - - If OPTSTRING starts with `-' or `+', it requests different methods of - handling the non-option ARGV-elements. - See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above. - - Long-named options begin with `--' instead of `-'. - Their names may be abbreviated as long as the abbreviation is unique - or is an exact match for some defined option. If they have an - argument, it follows the option name in the same ARGV-element, separated - from the option name by a `=', or else the in next ARGV-element. - When `getopt' finds a long-named option, it returns 0 if that option's - `flag' field is nonzero, the value of the option's `val' field - if the `flag' field is zero. - - The elements of ARGV aren't really const, because we permute them. - But we pretend they're const in the prototype to be compatible - with other systems. - - LONGOPTS is a vector of `struct option' terminated by an - element containing a name which is zero. - - LONGIND returns the index in LONGOPT of the long-named option found. - It is only valid when a long-named option has been found by the most - recent call. - - If LONG_ONLY is nonzero, '-' as well as '--' can introduce - long-named options. */ - -int -_getopt_internal (argc, argv, optstring, longopts, longind, long_only) - int argc; - char *const *argv; - const char *optstring; - const struct option *longopts; - int *longind; - int long_only; -{ - optarg = NULL; - - if (optind == 0 || !__getopt_initialized) - { - if (optind == 0) - optind = 1; /* Don't scan ARGV[0], the program name. */ - optstring = _getopt_initialize (argc, argv, optstring); - __getopt_initialized = 1; - } - - /* Test whether ARGV[optind] points to a non-option argument. - Either it does not have option syntax, or there is an environment flag - from the shell indicating it is not an option. The later information - is only used when the used in the GNU libc. */ -#ifdef _LIBC -# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0' \ - || (optind < nonoption_flags_len \ - && __getopt_nonoption_flags[optind] == '1')) -#else -# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0') -#endif - - if (nextchar == NULL || *nextchar == '\0') - { - /* Advance to the next ARGV-element. */ - - /* Give FIRST_NONOPT & LAST_NONOPT rational values if OPTIND has been - moved back by the user (who may also have changed the arguments). */ - if (last_nonopt > optind) - last_nonopt = optind; - if (first_nonopt > optind) - first_nonopt = optind; - - if (ordering == PERMUTE) - { - /* If we have just processed some options following some non-options, - exchange them so that the options come first. */ - - if (first_nonopt != last_nonopt && last_nonopt != optind) - exchange ((char **) argv); - else if (last_nonopt != optind) - first_nonopt = optind; - - /* Skip any additional non-options - and extend the range of non-options previously skipped. */ - - while (optind < argc && NONOPTION_P) - optind++; - last_nonopt = optind; - } - - /* The special ARGV-element `--' means premature end of options. - Skip it like a null option, - then exchange with previous non-options as if it were an option, - then skip everything else like a non-option. */ - - if (optind != argc && !strcmp (argv[optind], "--")) - { - optind++; - - if (first_nonopt != last_nonopt && last_nonopt != optind) - exchange ((char **) argv); - else if (first_nonopt == last_nonopt) - first_nonopt = optind; - last_nonopt = argc; - - optind = argc; - } - - /* If we have done all the ARGV-elements, stop the scan - and back over any non-options that we skipped and permuted. */ - - if (optind == argc) - { - /* Set the next-arg-index to point at the non-options - that we previously skipped, so the caller will digest them. */ - if (first_nonopt != last_nonopt) - optind = first_nonopt; - return -1; - } - - /* If we have come to a non-option and did not permute it, - either stop the scan or describe it to the caller and pass it by. */ - - if (NONOPTION_P) - { - if (ordering == REQUIRE_ORDER) - return -1; - optarg = argv[optind++]; - return 1; - } - - /* We have found another option-ARGV-element. - Skip the initial punctuation. */ - - nextchar = (argv[optind] + 1 - + (longopts != NULL && argv[optind][1] == '-')); - } - - /* Decode the current option-ARGV-element. */ - - /* Check whether the ARGV-element is a long option. - - If long_only and the ARGV-element has the form "-f", where f is - a valid short option, don't consider it an abbreviated form of - a long option that starts with f. Otherwise there would be no - way to give the -f short option. - - On the other hand, if there's a long option "fubar" and - the ARGV-element is "-fu", do consider that an abbreviation of - the long option, just like "--fu", and not "-f" with arg "u". - - This distinction seems to be the most useful approach. */ - - if (longopts != NULL - && (argv[optind][1] == '-' - || (long_only && (argv[optind][2] || !my_index (optstring, argv[optind][1]))))) - { - char *nameend; - const struct option *p; - const struct option *pfound = NULL; - int exact = 0; - int ambig = 0; - int indfound = -1; - int option_index; - - for (nameend = nextchar; *nameend && *nameend != '='; nameend++) - /* Do nothing. */ ; - - /* Test all long options for either exact match - or abbreviated matches. */ - for (p = longopts, option_index = 0; p->name; p++, option_index++) - if (!strncmp (p->name, nextchar, nameend - nextchar)) - { - if ((unsigned int) (nameend - nextchar) - == (unsigned int) strlen (p->name)) - { - /* Exact match found. */ - pfound = p; - indfound = option_index; - exact = 1; - break; - } - else if (pfound == NULL) - { - /* First nonexact match found. */ - pfound = p; - indfound = option_index; - } - else - /* Second or later nonexact match found. */ - ambig = 1; - } - - if (ambig && !exact) - { - if (opterr) - fprintf (stderr, _("%s: option `%s' is ambiguous\n"), - argv[0], argv[optind]); - nextchar += strlen (nextchar); - optind++; - optopt = 0; - return '?'; - } - - if (pfound != NULL) - { - option_index = indfound; - optind++; - if (*nameend) - { - /* Don't test has_arg with >, because some C compilers don't - allow it to be used on enums. */ - if (pfound->has_arg) - optarg = nameend + 1; - else - { - if (opterr) - { - if (argv[optind - 1][1] == '-') - /* --option */ - fprintf (stderr, - _("%s: option `--%s' doesn't allow an argument\n"), - argv[0], pfound->name); - else - /* +option or -option */ - fprintf (stderr, - _("%s: option `%c%s' doesn't allow an argument\n"), - argv[0], argv[optind - 1][0], pfound->name); - } - - nextchar += strlen (nextchar); - - optopt = pfound->val; - return '?'; - } - } - else if (pfound->has_arg == 1) - { - if (optind < argc) - optarg = argv[optind++]; - else - { - if (opterr) - fprintf (stderr, - _("%s: option `%s' requires an argument\n"), - argv[0], argv[optind - 1]); - nextchar += strlen (nextchar); - optopt = pfound->val; - return optstring[0] == ':' ? ':' : '?'; - } - } - nextchar += strlen (nextchar); - if (longind != NULL) - *longind = option_index; - if (pfound->flag) - { - *(pfound->flag) = pfound->val; - return 0; - } - return pfound->val; - } - - /* Can't find it as a long option. If this is not getopt_long_only, - or the option starts with '--' or is not a valid short - option, then it's an error. - Otherwise interpret it as a short option. */ - if (!long_only || argv[optind][1] == '-' - || my_index (optstring, *nextchar) == NULL) - { - if (opterr) - { - if (argv[optind][1] == '-') - /* --option */ - fprintf (stderr, _("%s: unrecognized option `--%s'\n"), - argv[0], nextchar); - else - /* +option or -option */ - fprintf (stderr, _("%s: unrecognized option `%c%s'\n"), - argv[0], argv[optind][0], nextchar); - } - nextchar = (char *) ""; - optind++; - optopt = 0; - return '?'; - } - } - - /* Look at and handle the next short option-character. */ - - { - char c = *nextchar++; - char *temp = my_index (optstring, c); - - /* Increment `optind' when we start to process its last character. */ - if (*nextchar == '\0') - ++optind; - - if (temp == NULL || c == ':') - { - if (opterr) - { - if (posixly_correct) - /* 1003.2 specifies the format of this message. */ - fprintf (stderr, _("%s: illegal option -- %c\n"), - argv[0], c); - else - fprintf (stderr, _("%s: invalid option -- %c\n"), - argv[0], c); - } - optopt = c; - return '?'; - } - /* Convenience. Treat POSIX -W foo same as long option --foo */ - if (temp[0] == 'W' && temp[1] == ';') - { - char *nameend; - const struct option *p; - const struct option *pfound = NULL; - int exact = 0; - int ambig = 0; - int indfound = 0; - int option_index; - - /* This is an option that requires an argument. */ - if (*nextchar != '\0') - { - optarg = nextchar; - /* If we end this ARGV-element by taking the rest as an arg, - we must advance to the next element now. */ - optind++; - } - else if (optind == argc) - { - if (opterr) - { - /* 1003.2 specifies the format of this message. */ - fprintf (stderr, _("%s: option requires an argument -- %c\n"), - argv[0], c); - } - optopt = c; - if (optstring[0] == ':') - c = ':'; - else - c = '?'; - return c; - } - else - /* We already incremented `optind' once; - increment it again when taking next ARGV-elt as argument. */ - optarg = argv[optind++]; - - /* optarg is now the argument, see if it's in the - table of longopts. */ - - for (nextchar = nameend = optarg; *nameend && *nameend != '='; nameend++) - /* Do nothing. */ ; - - /* Test all long options for either exact match - or abbreviated matches. */ - for (p = longopts, option_index = 0; p->name; p++, option_index++) - if (!strncmp (p->name, nextchar, nameend - nextchar)) - { - if ((unsigned int) (nameend - nextchar) == strlen (p->name)) - { - /* Exact match found. */ - pfound = p; - indfound = option_index; - exact = 1; - break; - } - else if (pfound == NULL) - { - /* First nonexact match found. */ - pfound = p; - indfound = option_index; - } - else - /* Second or later nonexact match found. */ - ambig = 1; - } - if (ambig && !exact) - { - if (opterr) - fprintf (stderr, _("%s: option `-W %s' is ambiguous\n"), - argv[0], argv[optind]); - nextchar += strlen (nextchar); - optind++; - return '?'; - } - if (pfound != NULL) - { - option_index = indfound; - if (*nameend) - { - /* Don't test has_arg with >, because some C compilers don't - allow it to be used on enums. */ - if (pfound->has_arg) - optarg = nameend + 1; - else - { - if (opterr) - fprintf (stderr, _("\ -%s: option `-W %s' doesn't allow an argument\n"), - argv[0], pfound->name); - - nextchar += strlen (nextchar); - return '?'; - } - } - else if (pfound->has_arg == 1) - { - if (optind < argc) - optarg = argv[optind++]; - else - { - if (opterr) - fprintf (stderr, - _("%s: option `%s' requires an argument\n"), - argv[0], argv[optind - 1]); - nextchar += strlen (nextchar); - return optstring[0] == ':' ? ':' : '?'; - } - } - nextchar += strlen (nextchar); - if (longind != NULL) - *longind = option_index; - if (pfound->flag) - { - *(pfound->flag) = pfound->val; - return 0; - } - return pfound->val; - } - nextchar = NULL; - return 'W'; /* Let the application handle it. */ - } - if (temp[1] == ':') - { - if (temp[2] == ':') - { - /* This is an option that accepts an argument optionally. */ - if (*nextchar != '\0') - { - optarg = nextchar; - optind++; - } - else - optarg = NULL; - nextchar = NULL; - } - else - { - /* This is an option that requires an argument. */ - if (*nextchar != '\0') - { - optarg = nextchar; - /* If we end this ARGV-element by taking the rest as an arg, - we must advance to the next element now. */ - optind++; - } - else if (optind == argc) - { - if (opterr) - { - /* 1003.2 specifies the format of this message. */ - fprintf (stderr, - _("%s: option requires an argument -- %c\n"), - argv[0], c); - } - optopt = c; - if (optstring[0] == ':') - c = ':'; - else - c = '?'; - } - else - /* We already incremented `optind' once; - increment it again when taking next ARGV-elt as argument. */ - optarg = argv[optind++]; - nextchar = NULL; - } - } - return c; - } -} - -int -getopt (argc, argv, optstring) - int argc; - char *const *argv; - const char *optstring; -{ - return _getopt_internal (argc, argv, optstring, - (const struct option *) 0, - (int *) 0, - 0); -} - -#endif /* Not ELIDE_CODE. */ - -#ifdef TEST - -/* Compile with -DTEST to make an executable for use in testing - the above definition of `getopt'. */ - -int -main (argc, argv) - int argc; - char **argv; -{ - int c; - int digit_optind = 0; - - while (1) - { - int this_option_optind = optind ? optind : 1; - - c = getopt (argc, argv, "abc:d:0123456789"); - if (c == -1) - break; - - switch (c) - { - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - case '8': - case '9': - if (digit_optind != 0 && digit_optind != this_option_optind) - printf ("digits occur in two different argv-elements.\n"); - digit_optind = this_option_optind; - printf ("option %c\n", c); - break; - - case 'a': - printf ("option a\n"); - break; - - case 'b': - printf ("option b\n"); - break; - - case 'c': - printf ("option c with value `%s'\n", optarg); - break; - - case '?': - break; - - default: - printf ("?? getopt returned character code 0%o ??\n", c); - } - } - - if (optind < argc) - { - printf ("non-option ARGV-elements: "); - while (optind < argc) - printf ("%s ", argv[optind++]); - printf ("\n"); - } - - exit (0); -} - -#endif /* TEST */ +/* Getopt for GNU. + NOTE: getopt is now part of the C library, so if you don't know what + "Keep this file name-space clean" means, talk to drepper@gnu.org + before changing it! + + Copyright (C) 1987, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 + Free Software Foundation, Inc. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If not, + write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +/* This tells Alpha OSF/1 not to define a getopt prototype in . + Ditto for AIX 3.2 and . */ +#ifndef _NO_PROTO +# define _NO_PROTO +#endif + +#ifdef HAVE_CONFIG_H +# include "config.h" +#endif + +#if !defined __STDC__ || !__STDC__ +/* This is a separate conditional since some stdc systems + reject `defined (const)'. */ +# ifndef const +# define const +# endif +#endif + +#include + +/* Comment out all this code if we are using the GNU C Library, and are not + actually compiling the library itself. This code is part of the GNU C + Library, but also included in many other GNU distributions. Compiling + and linking in this code is a waste when using the GNU C library + (especially if it is a shared library). Rather than having every GNU + program understand `configure --with-gnu-libc' and omit the object files, + it is simpler to just do this in the source for each such file. */ + +#define GETOPT_INTERFACE_VERSION 2 +#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2 +# include +# if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION +# define ELIDE_CODE +# endif +#endif + +#ifndef ELIDE_CODE + + +/* This needs to come after some library #include + to get __GNU_LIBRARY__ defined. */ +#ifdef __GNU_LIBRARY__ +/* Don't include stdlib.h for non-GNU C libraries because some of them + contain conflicting prototypes for getopt. */ +# include +# include +#endif /* GNU C library. */ + +#ifdef VMS +# include +# if HAVE_STRING_H - 0 +# include +# endif +#endif + +#ifndef _ +/* This is for other GNU distributions with internationalized messages. + When compiling libc, the _ macro is predefined. */ +# ifdef HAVE_LIBINTL_H +# include +# define _(msgid) gettext (msgid) +# else +# define _(msgid) (msgid) +# endif +#endif + +/* This version of `getopt' appears to the caller like standard Unix `getopt' + but it behaves differently for the user, since it allows the user + to intersperse the options with the other arguments. + + As `getopt' works, it permutes the elements of ARGV so that, + when it is done, all the options precede everything else. Thus + all application programs are extended to handle flexible argument order. + + Setting the environment variable POSIXLY_CORRECT disables permutation. + Then the behavior is completely standard. + + GNU application programs can use a third alternative mode in which + they can distinguish the relative order of options and other arguments. */ + +#include "getopt_win.h" + +/* For communication from `getopt' to the caller. + When `getopt' finds an option that takes an argument, + the argument value is returned here. + Also, when `ordering' is RETURN_IN_ORDER, + each non-option ARGV-element is returned here. */ + +char *optarg; + +/* Index in ARGV of the next element to be scanned. + This is used for communication to and from the caller + and for communication between successive calls to `getopt'. + + On entry to `getopt', zero means this is the first call; initialize. + + When `getopt' returns -1, this is the index of the first of the + non-option elements that the caller should itself scan. + + Otherwise, `optind' communicates from one call to the next + how much of ARGV has been scanned so far. */ + +/* 1003.2 says this must be 1 before any call. */ +int optind = 1; + +/* Formerly, initialization of getopt depended on optind==0, which + causes problems with re-calling getopt as programs generally don't + know that. */ + +int __getopt_initialized; + +/* The next char to be scanned in the option-element + in which the last option character we returned was found. + This allows us to pick up the scan where we left off. + + If this is zero, or a null string, it means resume the scan + by advancing to the next ARGV-element. */ + +static char *nextchar; + +/* Callers store zero here to inhibit the error message + for unrecognized options. */ + +int opterr = 1; + +/* Set to an option character which was unrecognized. + This must be initialized on some systems to avoid linking in the + system's own getopt implementation. */ + +int optopt = '?'; + +/* Describe how to deal with options that follow non-option ARGV-elements. + + If the caller did not specify anything, + the default is REQUIRE_ORDER if the environment variable + POSIXLY_CORRECT is defined, PERMUTE otherwise. + + REQUIRE_ORDER means don't recognize them as options; + stop option processing when the first non-option is seen. + This is what Unix does. + This mode of operation is selected by either setting the environment + variable POSIXLY_CORRECT, or using `+' as the first character + of the list of option characters. + + PERMUTE is the default. We permute the contents of ARGV as we scan, + so that eventually all the non-options are at the end. This allows options + to be given in any order, even with programs that were not written to + expect this. + + RETURN_IN_ORDER is an option available to programs that were written + to expect options and other ARGV-elements in any order and that care about + the ordering of the two. We describe each non-option ARGV-element + as if it were the argument of an option with character code 1. + Using `-' as the first character of the list of option characters + selects this mode of operation. + + The special argument `--' forces an end of option-scanning regardless + of the value of `ordering'. In the case of RETURN_IN_ORDER, only + `--' can cause `getopt' to return -1 with `optind' != ARGC. */ + +static enum +{ + REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER +} ordering; + +/* Value of POSIXLY_CORRECT environment variable. */ +static char *posixly_correct; + +#ifdef __GNU_LIBRARY__ +/* We want to avoid inclusion of string.h with non-GNU libraries + because there are many ways it can cause trouble. + On some systems, it contains special magic macros that don't work + in GCC. */ +# include +# define my_index strchr +#else + +#include + +/* Avoid depending on library functions or files + whose names are inconsistent. */ + +#ifndef getenv +extern char *getenv (); +#endif + +static char * +my_index (str, chr) + const char *str; + int chr; +{ + while (*str) + { + if (*str == chr) + return (char *) str; + str++; + } + return 0; +} + +/* If using GCC, we can safely declare strlen this way. + If not using GCC, it is ok not to declare it. */ +#ifdef __GNUC__ +/* Note that Motorola Delta 68k R3V7 comes with GCC but not stddef.h. + That was relevant to code that was here before. */ +# if (!defined __STDC__ || !__STDC__) && !defined strlen +/* gcc with -traditional declares the built-in strlen to return int, + and has done so at least since version 2.4.5. -- rms. */ +extern int strlen (const char *); +# endif /* not __STDC__ */ +#endif /* __GNUC__ */ + +#endif /* not __GNU_LIBRARY__ */ + +/* Handle permutation of arguments. */ + +/* Describe the part of ARGV that contains non-options that have + been skipped. `first_nonopt' is the index in ARGV of the first of them; + `last_nonopt' is the index after the last of them. */ + +static int first_nonopt; +static int last_nonopt; + +#ifdef _LIBC +/* Bash 2.0 gives us an environment variable containing flags + indicating ARGV elements that should not be considered arguments. */ + +/* Defined in getopt_init.c */ +extern char *__getopt_nonoption_flags; + +static int nonoption_flags_max_len; +static int nonoption_flags_len; + +static int original_argc; +static char *const *original_argv; + +/* Make sure the environment variable bash 2.0 puts in the environment + is valid for the getopt call we must make sure that the ARGV passed + to getopt is that one passed to the process. */ +static void +__attribute__ ((unused)) +store_args_and_env (int argc, char *const *argv) +{ + /* XXX This is no good solution. We should rather copy the args so + that we can compare them later. But we must not use malloc(3). */ + original_argc = argc; + original_argv = argv; +} +# ifdef text_set_element +text_set_element (__libc_subinit, store_args_and_env); +# endif /* text_set_element */ + +# define SWAP_FLAGS(ch1, ch2) \ + if (nonoption_flags_len > 0) \ + { \ + char __tmp = __getopt_nonoption_flags[ch1]; \ + __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2]; \ + __getopt_nonoption_flags[ch2] = __tmp; \ + } +#else /* !_LIBC */ +# define SWAP_FLAGS(ch1, ch2) +#endif /* _LIBC */ + +/* Exchange two adjacent subsequences of ARGV. + One subsequence is elements [first_nonopt,last_nonopt) + which contains all the non-options that have been skipped so far. + The other is elements [last_nonopt,optind), which contains all + the options processed since those non-options were skipped. + + `first_nonopt' and `last_nonopt' are relocated so that they describe + the new indices of the non-options in ARGV after they are moved. */ + +#if defined __STDC__ && __STDC__ +static void exchange (char **); +#endif + +static void +exchange (argv) + char **argv; +{ + int bottom = first_nonopt; + int middle = last_nonopt; + int top = optind; + char *tem; + + /* Exchange the shorter segment with the far end of the longer segment. + That puts the shorter segment into the right place. + It leaves the longer segment in the right place overall, + but it consists of two parts that need to be swapped next. */ + +#ifdef _LIBC + /* First make sure the handling of the `__getopt_nonoption_flags' + string can work normally. Our top argument must be in the range + of the string. */ + if (nonoption_flags_len > 0 && top >= nonoption_flags_max_len) + { + /* We must extend the array. The user plays games with us and + presents new arguments. */ + char *new_str = malloc (top + 1); + if (new_str == NULL) + nonoption_flags_len = nonoption_flags_max_len = 0; + else + { + memset (__mempcpy (new_str, __getopt_nonoption_flags, + nonoption_flags_max_len), + '\0', top + 1 - nonoption_flags_max_len); + nonoption_flags_max_len = top + 1; + __getopt_nonoption_flags = new_str; + } + } +#endif + + while (top > middle && middle > bottom) + { + if (top - middle > middle - bottom) + { + /* Bottom segment is the short one. */ + int len = middle - bottom; + register int i; + + /* Swap it with the top part of the top segment. */ + for (i = 0; i < len; i++) + { + tem = argv[bottom + i]; + argv[bottom + i] = argv[top - (middle - bottom) + i]; + argv[top - (middle - bottom) + i] = tem; + SWAP_FLAGS (bottom + i, top - (middle - bottom) + i); + } + /* Exclude the moved bottom segment from further swapping. */ + top -= len; + } + else + { + /* Top segment is the short one. */ + int len = top - middle; + register int i; + + /* Swap it with the bottom part of the bottom segment. */ + for (i = 0; i < len; i++) + { + tem = argv[bottom + i]; + argv[bottom + i] = argv[middle + i]; + argv[middle + i] = tem; + SWAP_FLAGS (bottom + i, middle + i); + } + /* Exclude the moved top segment from further swapping. */ + bottom += len; + } + } + + /* Update records for the slots the non-options now occupy. */ + + first_nonopt += (optind - last_nonopt); + last_nonopt = optind; +} + +/* Initialize the internal data when the first call is made. */ + +#if defined __STDC__ && __STDC__ +static const char *_getopt_initialize (int, char *const *, const char *); +#endif +static const char * +_getopt_initialize (argc, argv, optstring) + int argc; + char *const *argv; + const char *optstring; +{ + /* Start processing options with ARGV-element 1 (since ARGV-element 0 + is the program name); the sequence of previously skipped + non-option ARGV-elements is empty. */ + + first_nonopt = last_nonopt = optind; + + nextchar = NULL; + + posixly_correct = getenv ("POSIXLY_CORRECT"); + + /* Determine how to handle the ordering of options and nonoptions. */ + + if (optstring[0] == '-') + { + ordering = RETURN_IN_ORDER; + ++optstring; + } + else if (optstring[0] == '+') + { + ordering = REQUIRE_ORDER; + ++optstring; + } + else if (posixly_correct != NULL) + ordering = REQUIRE_ORDER; + else + ordering = PERMUTE; + +#ifdef _LIBC + if (posixly_correct == NULL + && argc == original_argc && argv == original_argv) + { + if (nonoption_flags_max_len == 0) + { + if (__getopt_nonoption_flags == NULL + || __getopt_nonoption_flags[0] == '\0') + nonoption_flags_max_len = -1; + else + { + const char *orig_str = __getopt_nonoption_flags; + int len = nonoption_flags_max_len = strlen (orig_str); + if (nonoption_flags_max_len < argc) + nonoption_flags_max_len = argc; + __getopt_nonoption_flags = + (char *) malloc (nonoption_flags_max_len); + if (__getopt_nonoption_flags == NULL) + nonoption_flags_max_len = -1; + else + memset (__mempcpy (__getopt_nonoption_flags, orig_str, len), + '\0', nonoption_flags_max_len - len); + } + } + nonoption_flags_len = nonoption_flags_max_len; + } + else + nonoption_flags_len = 0; +#endif + + return optstring; +} + +/* Scan elements of ARGV (whose length is ARGC) for option characters + given in OPTSTRING. + + If an element of ARGV starts with '-', and is not exactly "-" or "--", + then it is an option element. The characters of this element + (aside from the initial '-') are option characters. If `getopt' + is called repeatedly, it returns successively each of the option characters + from each of the option elements. + + If `getopt' finds another option character, it returns that character, + updating `optind' and `nextchar' so that the next call to `getopt' can + resume the scan with the following option character or ARGV-element. + + If there are no more option characters, `getopt' returns -1. + Then `optind' is the index in ARGV of the first ARGV-element + that is not an option. (The ARGV-elements have been permuted + so that those that are not options now come last.) + + OPTSTRING is a string containing the legitimate option characters. + If an option character is seen that is not listed in OPTSTRING, + return '?' after printing an error message. If you set `opterr' to + zero, the error message is suppressed but we still return '?'. + + If a char in OPTSTRING is followed by a colon, that means it wants an arg, + so the following text in the same ARGV-element, or the text of the following + ARGV-element, is returned in `optarg'. Two colons mean an option that + wants an optional arg; if there is text in the current ARGV-element, + it is returned in `optarg', otherwise `optarg' is set to zero. + + If OPTSTRING starts with `-' or `+', it requests different methods of + handling the non-option ARGV-elements. + See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above. + + Long-named options begin with `--' instead of `-'. + Their names may be abbreviated as long as the abbreviation is unique + or is an exact match for some defined option. If they have an + argument, it follows the option name in the same ARGV-element, separated + from the option name by a `=', or else the in next ARGV-element. + When `getopt' finds a long-named option, it returns 0 if that option's + `flag' field is nonzero, the value of the option's `val' field + if the `flag' field is zero. + + The elements of ARGV aren't really const, because we permute them. + But we pretend they're const in the prototype to be compatible + with other systems. + + LONGOPTS is a vector of `struct option' terminated by an + element containing a name which is zero. + + LONGIND returns the index in LONGOPT of the long-named option found. + It is only valid when a long-named option has been found by the most + recent call. + + If LONG_ONLY is nonzero, '-' as well as '--' can introduce + long-named options. */ + +int +_getopt_internal (argc, argv, optstring, longopts, longind, long_only) + int argc; + char *const *argv; + const char *optstring; + const struct option *longopts; + int *longind; + int long_only; +{ + optarg = NULL; + + if (optind == 0 || !__getopt_initialized) + { + if (optind == 0) + optind = 1; /* Don't scan ARGV[0], the program name. */ + optstring = _getopt_initialize (argc, argv, optstring); + __getopt_initialized = 1; + } + + /* Test whether ARGV[optind] points to a non-option argument. + Either it does not have option syntax, or there is an environment flag + from the shell indicating it is not an option. The later information + is only used when the used in the GNU libc. */ +#ifdef _LIBC +# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0' \ + || (optind < nonoption_flags_len \ + && __getopt_nonoption_flags[optind] == '1')) +#else +# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0') +#endif + + if (nextchar == NULL || *nextchar == '\0') + { + /* Advance to the next ARGV-element. */ + + /* Give FIRST_NONOPT & LAST_NONOPT rational values if OPTIND has been + moved back by the user (who may also have changed the arguments). */ + if (last_nonopt > optind) + last_nonopt = optind; + if (first_nonopt > optind) + first_nonopt = optind; + + if (ordering == PERMUTE) + { + /* If we have just processed some options following some non-options, + exchange them so that the options come first. */ + + if (first_nonopt != last_nonopt && last_nonopt != optind) + exchange ((char **) argv); + else if (last_nonopt != optind) + first_nonopt = optind; + + /* Skip any additional non-options + and extend the range of non-options previously skipped. */ + + while (optind < argc && NONOPTION_P) + optind++; + last_nonopt = optind; + } + + /* The special ARGV-element `--' means premature end of options. + Skip it like a null option, + then exchange with previous non-options as if it were an option, + then skip everything else like a non-option. */ + + if (optind != argc && !strcmp (argv[optind], "--")) + { + optind++; + + if (first_nonopt != last_nonopt && last_nonopt != optind) + exchange ((char **) argv); + else if (first_nonopt == last_nonopt) + first_nonopt = optind; + last_nonopt = argc; + + optind = argc; + } + + /* If we have done all the ARGV-elements, stop the scan + and back over any non-options that we skipped and permuted. */ + + if (optind == argc) + { + /* Set the next-arg-index to point at the non-options + that we previously skipped, so the caller will digest them. */ + if (first_nonopt != last_nonopt) + optind = first_nonopt; + return -1; + } + + /* If we have come to a non-option and did not permute it, + either stop the scan or describe it to the caller and pass it by. */ + + if (NONOPTION_P) + { + if (ordering == REQUIRE_ORDER) + return -1; + optarg = argv[optind++]; + return 1; + } + + /* We have found another option-ARGV-element. + Skip the initial punctuation. */ + + nextchar = (argv[optind] + 1 + + (longopts != NULL && argv[optind][1] == '-')); + } + + /* Decode the current option-ARGV-element. */ + + /* Check whether the ARGV-element is a long option. + + If long_only and the ARGV-element has the form "-f", where f is + a valid short option, don't consider it an abbreviated form of + a long option that starts with f. Otherwise there would be no + way to give the -f short option. + + On the other hand, if there's a long option "fubar" and + the ARGV-element is "-fu", do consider that an abbreviation of + the long option, just like "--fu", and not "-f" with arg "u". + + This distinction seems to be the most useful approach. */ + + if (longopts != NULL + && (argv[optind][1] == '-' + || (long_only && (argv[optind][2] || !my_index (optstring, argv[optind][1]))))) + { + char *nameend; + const struct option *p; + const struct option *pfound = NULL; + int exact = 0; + int ambig = 0; + int indfound = -1; + int option_index; + + for (nameend = nextchar; *nameend && *nameend != '='; nameend++) + /* Do nothing. */ ; + + /* Test all long options for either exact match + or abbreviated matches. */ + for (p = longopts, option_index = 0; p->name; p++, option_index++) + if (!strncmp (p->name, nextchar, nameend - nextchar)) + { + if ((unsigned int) (nameend - nextchar) + == (unsigned int) strlen (p->name)) + { + /* Exact match found. */ + pfound = p; + indfound = option_index; + exact = 1; + break; + } + else if (pfound == NULL) + { + /* First nonexact match found. */ + pfound = p; + indfound = option_index; + } + else + /* Second or later nonexact match found. */ + ambig = 1; + } + + if (ambig && !exact) + { + if (opterr) + fprintf (stderr, _("%s: option `%s' is ambiguous\n"), + argv[0], argv[optind]); + nextchar += strlen (nextchar); + optind++; + optopt = 0; + return '?'; + } + + if (pfound != NULL) + { + option_index = indfound; + optind++; + if (*nameend) + { + /* Don't test has_arg with >, because some C compilers don't + allow it to be used on enums. */ + if (pfound->has_arg) + optarg = nameend + 1; + else + { + if (opterr) + { + if (argv[optind - 1][1] == '-') + /* --option */ + fprintf (stderr, + _("%s: option `--%s' doesn't allow an argument\n"), + argv[0], pfound->name); + else + /* +option or -option */ + fprintf (stderr, + _("%s: option `%c%s' doesn't allow an argument\n"), + argv[0], argv[optind - 1][0], pfound->name); + } + + nextchar += strlen (nextchar); + + optopt = pfound->val; + return '?'; + } + } + else if (pfound->has_arg == 1) + { + if (optind < argc) + optarg = argv[optind++]; + else + { + if (opterr) + fprintf (stderr, + _("%s: option `%s' requires an argument\n"), + argv[0], argv[optind - 1]); + nextchar += strlen (nextchar); + optopt = pfound->val; + return optstring[0] == ':' ? ':' : '?'; + } + } + nextchar += strlen (nextchar); + if (longind != NULL) + *longind = option_index; + if (pfound->flag) + { + *(pfound->flag) = pfound->val; + return 0; + } + return pfound->val; + } + + /* Can't find it as a long option. If this is not getopt_long_only, + or the option starts with '--' or is not a valid short + option, then it's an error. + Otherwise interpret it as a short option. */ + if (!long_only || argv[optind][1] == '-' + || my_index (optstring, *nextchar) == NULL) + { + if (opterr) + { + if (argv[optind][1] == '-') + /* --option */ + fprintf (stderr, _("%s: unrecognized option `--%s'\n"), + argv[0], nextchar); + else + /* +option or -option */ + fprintf (stderr, _("%s: unrecognized option `%c%s'\n"), + argv[0], argv[optind][0], nextchar); + } + nextchar = (char *) ""; + optind++; + optopt = 0; + return '?'; + } + } + + /* Look at and handle the next short option-character. */ + + { + char c = *nextchar++; + char *temp = my_index (optstring, c); + + /* Increment `optind' when we start to process its last character. */ + if (*nextchar == '\0') + ++optind; + + if (temp == NULL || c == ':') + { + if (opterr) + { + if (posixly_correct) + /* 1003.2 specifies the format of this message. */ + fprintf (stderr, _("%s: illegal option -- %c\n"), + argv[0], c); + else + fprintf (stderr, _("%s: invalid option -- %c\n"), + argv[0], c); + } + optopt = c; + return '?'; + } + /* Convenience. Treat POSIX -W foo same as long option --foo */ + if (temp[0] == 'W' && temp[1] == ';') + { + char *nameend; + const struct option *p; + const struct option *pfound = NULL; + int exact = 0; + int ambig = 0; + int indfound = 0; + int option_index; + + /* This is an option that requires an argument. */ + if (*nextchar != '\0') + { + optarg = nextchar; + /* If we end this ARGV-element by taking the rest as an arg, + we must advance to the next element now. */ + optind++; + } + else if (optind == argc) + { + if (opterr) + { + /* 1003.2 specifies the format of this message. */ + fprintf (stderr, _("%s: option requires an argument -- %c\n"), + argv[0], c); + } + optopt = c; + if (optstring[0] == ':') + c = ':'; + else + c = '?'; + return c; + } + else + /* We already incremented `optind' once; + increment it again when taking next ARGV-elt as argument. */ + optarg = argv[optind++]; + + /* optarg is now the argument, see if it's in the + table of longopts. */ + + for (nextchar = nameend = optarg; *nameend && *nameend != '='; nameend++) + /* Do nothing. */ ; + + /* Test all long options for either exact match + or abbreviated matches. */ + for (p = longopts, option_index = 0; p->name; p++, option_index++) + if (!strncmp (p->name, nextchar, nameend - nextchar)) + { + if ((unsigned int) (nameend - nextchar) == strlen (p->name)) + { + /* Exact match found. */ + pfound = p; + indfound = option_index; + exact = 1; + break; + } + else if (pfound == NULL) + { + /* First nonexact match found. */ + pfound = p; + indfound = option_index; + } + else + /* Second or later nonexact match found. */ + ambig = 1; + } + if (ambig && !exact) + { + if (opterr) + fprintf (stderr, _("%s: option `-W %s' is ambiguous\n"), + argv[0], argv[optind]); + nextchar += strlen (nextchar); + optind++; + return '?'; + } + if (pfound != NULL) + { + option_index = indfound; + if (*nameend) + { + /* Don't test has_arg with >, because some C compilers don't + allow it to be used on enums. */ + if (pfound->has_arg) + optarg = nameend + 1; + else + { + if (opterr) + fprintf (stderr, _("\ +%s: option `-W %s' doesn't allow an argument\n"), + argv[0], pfound->name); + + nextchar += strlen (nextchar); + return '?'; + } + } + else if (pfound->has_arg == 1) + { + if (optind < argc) + optarg = argv[optind++]; + else + { + if (opterr) + fprintf (stderr, + _("%s: option `%s' requires an argument\n"), + argv[0], argv[optind - 1]); + nextchar += strlen (nextchar); + return optstring[0] == ':' ? ':' : '?'; + } + } + nextchar += strlen (nextchar); + if (longind != NULL) + *longind = option_index; + if (pfound->flag) + { + *(pfound->flag) = pfound->val; + return 0; + } + return pfound->val; + } + nextchar = NULL; + return 'W'; /* Let the application handle it. */ + } + if (temp[1] == ':') + { + if (temp[2] == ':') + { + /* This is an option that accepts an argument optionally. */ + if (*nextchar != '\0') + { + optarg = nextchar; + optind++; + } + else + optarg = NULL; + nextchar = NULL; + } + else + { + /* This is an option that requires an argument. */ + if (*nextchar != '\0') + { + optarg = nextchar; + /* If we end this ARGV-element by taking the rest as an arg, + we must advance to the next element now. */ + optind++; + } + else if (optind == argc) + { + if (opterr) + { + /* 1003.2 specifies the format of this message. */ + fprintf (stderr, + _("%s: option requires an argument -- %c\n"), + argv[0], c); + } + optopt = c; + if (optstring[0] == ':') + c = ':'; + else + c = '?'; + } + else + /* We already incremented `optind' once; + increment it again when taking next ARGV-elt as argument. */ + optarg = argv[optind++]; + nextchar = NULL; + } + } + return c; + } +} + +int +getopt (argc, argv, optstring) + int argc; + char *const *argv; + const char *optstring; +{ + return _getopt_internal (argc, argv, optstring, + (const struct option *) 0, + (int *) 0, + 0); +} + +#endif /* Not ELIDE_CODE. */ + +#ifdef TEST + +/* Compile with -DTEST to make an executable for use in testing + the above definition of `getopt'. */ + +int +main (argc, argv) + int argc; + char **argv; +{ + int c; + int digit_optind = 0; + + while (1) + { + int this_option_optind = optind ? optind : 1; + + c = getopt (argc, argv, "abc:d:0123456789"); + if (c == -1) + break; + + switch (c) + { + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + case '8': + case '9': + if (digit_optind != 0 && digit_optind != this_option_optind) + printf ("digits occur in two different argv-elements.\n"); + digit_optind = this_option_optind; + printf ("option %c\n", c); + break; + + case 'a': + printf ("option a\n"); + break; + + case 'b': + printf ("option b\n"); + break; + + case 'c': + printf ("option c with value `%s'\n", optarg); + break; + + case '?': + break; + + default: + printf ("?? getopt returned character code 0%o ??\n", c); + } + } + + if (optind < argc) + { + printf ("non-option ARGV-elements: "); + while (optind < argc) + printf ("%s ", argv[optind++]); + printf ("\n"); + } + + exit (0); +} + +#endif /* TEST */ diff -Nru speex-1.2~rc1.2/src/getopt_win.h speex-1.2.0/src/getopt_win.h --- speex-1.2~rc1.2/src/getopt_win.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/src/getopt_win.h 2015-07-06 15:02:09.000000000 +0000 @@ -1,169 +1,169 @@ -/* Declarations for getopt. - Copyright (C) 1989,90,91,92,93,94,96,97,98 Free Software Foundation, Inc. - This file is part of the GNU C Library. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with the GNU C Library; see the file COPYING.LIB. If not, - write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -#ifndef _GETOPT_H - -#ifndef __need_getopt -# define _GETOPT_H 1 -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -/* For communication from `getopt' to the caller. - When `getopt' finds an option that takes an argument, - the argument value is returned here. - Also, when `ordering' is RETURN_IN_ORDER, - each non-option ARGV-element is returned here. */ - -extern char *optarg; - -/* Index in ARGV of the next element to be scanned. - This is used for communication to and from the caller - and for communication between successive calls to `getopt'. - - On entry to `getopt', zero means this is the first call; initialize. - - When `getopt' returns -1, this is the index of the first of the - non-option elements that the caller should itself scan. - - Otherwise, `optind' communicates from one call to the next - how much of ARGV has been scanned so far. */ - -extern int optind; - -/* Callers store zero here to inhibit the error message `getopt' prints - for unrecognized options. */ - -extern int opterr; - -/* Set to an option character which was unrecognized. */ - -extern int optopt; - -#ifndef __need_getopt -/* Describe the long-named options requested by the application. - The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector - of `struct option' terminated by an element containing a name which is - zero. - - The field `has_arg' is: - no_argument (or 0) if the option does not take an argument, - required_argument (or 1) if the option requires an argument, - optional_argument (or 2) if the option takes an optional argument. - - If the field `flag' is not NULL, it points to a variable that is set - to the value given in the field `val' when the option is found, but - left unchanged if the option is not found. - - To have a long-named option do something other than set an `int' to - a compiled-in constant, such as set a value from `optarg', set the - option's `flag' field to zero and its `val' field to a nonzero - value (the equivalent single-letter option character, if there is - one). For long options that have a zero `flag' field, `getopt' - returns the contents of the `val' field. */ - -struct option -{ -# if defined __STDC__ && __STDC__ - const char *name; -# else - char *name; -# endif - /* has_arg can't be an enum because some compilers complain about - type mismatches in all the code that assumes it is an int. */ - int has_arg; - int *flag; - int val; -}; - -/* Names for the values of the `has_arg' field of `struct option'. */ - -# define no_argument 0 -# define required_argument 1 -# define optional_argument 2 -#endif /* need getopt */ - - -/* Get definitions and prototypes for functions to process the - arguments in ARGV (ARGC of them, minus the program name) for - options given in OPTS. - - Return the option character from OPTS just read. Return -1 when - there are no more options. For unrecognized options, or options - missing arguments, `optopt' is set to the option letter, and '?' is - returned. - - The OPTS string is a list of characters which are recognized option - letters, optionally followed by colons, specifying that that letter - takes an argument, to be placed in `optarg'. - - If a letter in OPTS is followed by two colons, its argument is - optional. This behavior is specific to the GNU `getopt'. - - The argument `--' causes premature termination of argument - scanning, explicitly telling `getopt' that there are no more - options. - - If OPTS begins with `--', then non-option arguments are treated as - arguments to the option '\0'. This behavior is specific to the GNU - `getopt'. */ - -#if defined __STDC__ && __STDC__ -# ifdef __GNU_LIBRARY__ -/* Many other libraries have conflicting prototypes for getopt, with - differences in the consts, in stdlib.h. To avoid compilation - errors, only prototype getopt for the GNU C library. */ -extern int getopt (int __argc, char *const *__argv, const char *__shortopts); -# else /* not __GNU_LIBRARY__ */ -extern int getopt (); -# endif /* __GNU_LIBRARY__ */ - -# ifndef __need_getopt -extern int getopt_long (int __argc, char *const *__argv, const char *__shortopts, - const struct option *__longopts, int *__longind); -extern int getopt_long_only (int __argc, char *const *__argv, - const char *__shortopts, - const struct option *__longopts, int *__longind); - -/* Internal only. Users should not call this directly. */ -extern int _getopt_internal (int __argc, char *const *__argv, - const char *__shortopts, - const struct option *__longopts, int *__longind, - int __long_only); -# endif -#else /* not __STDC__ */ -extern int getopt (); -# ifndef __need_getopt -extern int getopt_long (); -extern int getopt_long_only (); - -extern int _getopt_internal (); -# endif -#endif /* __STDC__ */ - -#ifdef __cplusplus -} -#endif - -/* Make sure we later can get all the definitions and declarations. */ -#undef __need_getopt - -#endif /* getopt.h */ +/* Declarations for getopt. + Copyright (C) 1989,90,91,92,93,94,96,97,98 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If not, + write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +#ifndef _GETOPT_H + +#ifndef __need_getopt +# define _GETOPT_H 1 +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/* For communication from `getopt' to the caller. + When `getopt' finds an option that takes an argument, + the argument value is returned here. + Also, when `ordering' is RETURN_IN_ORDER, + each non-option ARGV-element is returned here. */ + +extern char *optarg; + +/* Index in ARGV of the next element to be scanned. + This is used for communication to and from the caller + and for communication between successive calls to `getopt'. + + On entry to `getopt', zero means this is the first call; initialize. + + When `getopt' returns -1, this is the index of the first of the + non-option elements that the caller should itself scan. + + Otherwise, `optind' communicates from one call to the next + how much of ARGV has been scanned so far. */ + +extern int optind; + +/* Callers store zero here to inhibit the error message `getopt' prints + for unrecognized options. */ + +extern int opterr; + +/* Set to an option character which was unrecognized. */ + +extern int optopt; + +#ifndef __need_getopt +/* Describe the long-named options requested by the application. + The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector + of `struct option' terminated by an element containing a name which is + zero. + + The field `has_arg' is: + no_argument (or 0) if the option does not take an argument, + required_argument (or 1) if the option requires an argument, + optional_argument (or 2) if the option takes an optional argument. + + If the field `flag' is not NULL, it points to a variable that is set + to the value given in the field `val' when the option is found, but + left unchanged if the option is not found. + + To have a long-named option do something other than set an `int' to + a compiled-in constant, such as set a value from `optarg', set the + option's `flag' field to zero and its `val' field to a nonzero + value (the equivalent single-letter option character, if there is + one). For long options that have a zero `flag' field, `getopt' + returns the contents of the `val' field. */ + +struct option +{ +# if defined __STDC__ && __STDC__ + const char *name; +# else + char *name; +# endif + /* has_arg can't be an enum because some compilers complain about + type mismatches in all the code that assumes it is an int. */ + int has_arg; + int *flag; + int val; +}; + +/* Names for the values of the `has_arg' field of `struct option'. */ + +# define no_argument 0 +# define required_argument 1 +# define optional_argument 2 +#endif /* need getopt */ + + +/* Get definitions and prototypes for functions to process the + arguments in ARGV (ARGC of them, minus the program name) for + options given in OPTS. + + Return the option character from OPTS just read. Return -1 when + there are no more options. For unrecognized options, or options + missing arguments, `optopt' is set to the option letter, and '?' is + returned. + + The OPTS string is a list of characters which are recognized option + letters, optionally followed by colons, specifying that that letter + takes an argument, to be placed in `optarg'. + + If a letter in OPTS is followed by two colons, its argument is + optional. This behavior is specific to the GNU `getopt'. + + The argument `--' causes premature termination of argument + scanning, explicitly telling `getopt' that there are no more + options. + + If OPTS begins with `--', then non-option arguments are treated as + arguments to the option '\0'. This behavior is specific to the GNU + `getopt'. */ + +#if defined __STDC__ && __STDC__ +# ifdef __GNU_LIBRARY__ +/* Many other libraries have conflicting prototypes for getopt, with + differences in the consts, in stdlib.h. To avoid compilation + errors, only prototype getopt for the GNU C library. */ +extern int getopt (int __argc, char *const *__argv, const char *__shortopts); +# else /* not __GNU_LIBRARY__ */ +extern int getopt (); +# endif /* __GNU_LIBRARY__ */ + +# ifndef __need_getopt +extern int getopt_long (int __argc, char *const *__argv, const char *__shortopts, + const struct option *__longopts, int *__longind); +extern int getopt_long_only (int __argc, char *const *__argv, + const char *__shortopts, + const struct option *__longopts, int *__longind); + +/* Internal only. Users should not call this directly. */ +extern int _getopt_internal (int __argc, char *const *__argv, + const char *__shortopts, + const struct option *__longopts, int *__longind, + int __long_only); +# endif +#else /* not __STDC__ */ +extern int getopt (); +# ifndef __need_getopt +extern int getopt_long (); +extern int getopt_long_only (); + +extern int _getopt_internal (); +# endif +#endif /* __STDC__ */ + +#ifdef __cplusplus +} +#endif + +/* Make sure we later can get all the definitions and declarations. */ +#undef __need_getopt + +#endif /* getopt.h */ diff -Nru speex-1.2~rc1.2/src/Makefile.am speex-1.2.0/src/Makefile.am --- speex-1.2~rc1.2/src/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/src/Makefile.am 2016-09-08 04:50:40.000000000 +0000 @@ -5,21 +5,24 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies -INCLUDES = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) @OGG_CFLAGS@ +AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include/speex -I$(top_builddir) @OGG_CFLAGS@ @SPEEXDSP_CFLAGS@ man_MANS = speexenc.1 speexdec.1 EXTRA_DIST = $(man_MANS) getopt_win.h getopt.c getopt1.c wave_out.c wave_out.h skeleton.h -include_HEADERS = +include_HEADERS = noinst_HEADERS = wav_io.h bin_PROGRAMS = speexenc speexdec +CFLAGS += $(OGG_CFLAGS) + speexenc_SOURCES = speexenc.c wav_io.c skeleton.c -speexenc_LDADD = $(top_builddir)/libspeex/libspeex.la $(top_builddir)/libspeex/libspeexdsp.la \ - $(OGG_LIBS) @FFT_LIBS@ +speexenc_LDADD = $(top_builddir)/libspeex/libspeex.la \ + $(OGG_LIBS) @FFT_LIBS@ @SPEEXDSP_LIBS@ speexdec_SOURCES = speexdec.c wav_io.c speexdec_LDADD = $(top_builddir)/libspeex/libspeex.la \ - $(OGG_LIBS) @FFT_LIBS@ + $(OGG_LIBS) @WINMM_LIBS@ @FFT_LIBS@ + diff -Nru speex-1.2~rc1.2/src/Makefile.in speex-1.2.0/src/Makefile.in --- speex-1.2~rc1.2/src/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/src/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -21,7 +21,17 @@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -86,13 +96,16 @@ host_triplet = @host@ bin_PROGRAMS = speexenc$(EXEEXT) speexdec$(EXEEXT) subdir = src -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp $(include_HEADERS) $(noinst_HEADERS) ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(include_HEADERS) \ + $(noinst_HEADERS) $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -113,7 +126,7 @@ skeleton.$(OBJEXT) speexenc_OBJECTS = $(am_speexenc_OBJECTS) speexenc_DEPENDENCIES = $(top_builddir)/libspeex/libspeex.la \ - $(top_builddir)/libspeex/libspeexdsp.la $(am__DEPENDENCIES_1) + $(am__DEPENDENCIES_1) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false @@ -205,6 +218,7 @@ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags +am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -217,7 +231,7 @@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ +CFLAGS = @CFLAGS@ $(OGG_CFLAGS) CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ @@ -236,6 +250,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -243,12 +258,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -278,12 +295,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -328,27 +350,27 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -INCLUDES = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) @OGG_CFLAGS@ +AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include/speex -I$(top_builddir) @OGG_CFLAGS@ @SPEEXDSP_CFLAGS@ man_MANS = speexenc.1 speexdec.1 EXTRA_DIST = $(man_MANS) getopt_win.h getopt.c getopt1.c wave_out.c wave_out.h skeleton.h include_HEADERS = noinst_HEADERS = wav_io.h speexenc_SOURCES = speexenc.c wav_io.c skeleton.c -speexenc_LDADD = $(top_builddir)/libspeex/libspeex.la $(top_builddir)/libspeex/libspeexdsp.la \ - $(OGG_LIBS) @FFT_LIBS@ +speexenc_LDADD = $(top_builddir)/libspeex/libspeex.la \ + $(OGG_LIBS) @FFT_LIBS@ @SPEEXDSP_LIBS@ speexdec_SOURCES = speexdec.c wav_io.c speexdec_LDADD = $(top_builddir)/libspeex/libspeex.la \ - $(OGG_LIBS) @FFT_LIBS@ + $(OGG_LIBS) @WINMM_LIBS@ @FFT_LIBS@ all: all-am @@ -363,10 +385,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign src/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -754,6 +775,8 @@ uninstall-am uninstall-binPROGRAMS uninstall-includeHEADERS \ uninstall-man uninstall-man1 +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/src/skeleton.c speex-1.2.0/src/skeleton.c --- speex-1.2~rc1.2/src/skeleton.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/src/skeleton.c 2015-07-23 18:05:56.000000000 +0000 @@ -14,15 +14,15 @@ /* write an ogg_page to a file pointer */ int write_ogg_page_to_file(ogg_page *og, FILE *out) { int written; - + written = fwrite(og->header,1, og->header_len, out); written += fwrite(og->body,1, og->body_len, out); return written; } -int add_message_header_field(fisbone_packet *fp, - char *header_key, +int add_message_header_field(fisbone_packet *fp, + char *header_key, char *header_value) { /* size of both key and value + ': ' + CRLF */ @@ -33,10 +33,10 @@ int new_size = (fp->current_header_size + this_message_size) * sizeof(char); fp->message_header_fields = _ogg_realloc(fp->message_header_fields, new_size); } - snprintf(fp->message_header_fields + fp->current_header_size, - this_message_size+1, - "%s: %s\r\n", - header_key, + snprintf(fp->message_header_fields + fp->current_header_size, + this_message_size+1, + "%s: %s\r\n", + header_key, header_value); fp->current_header_size += this_message_size; @@ -68,16 +68,16 @@ return op; } -/* create a ogg_packet from a fisbone_packet structure. +/* create a ogg_packet from a fisbone_packet structure. * call this method after the fisbone_packet is filled and all message header fields are added * by calling add_message_header_field method. */ ogg_packet ogg_from_fisbone(fisbone_packet *fp) { - + ogg_packet op; int packet_size = FISBONE_SIZE + fp->current_header_size; - memset (&op, 0, sizeof (op)); + memset (&op, 0, sizeof (op)); op.packet = _ogg_calloc (packet_size, sizeof(unsigned char)); memset (op.packet, 0, packet_size); memcpy (op.packet, FISBONE_IDENTIFIER, 8); /* identifier */ @@ -100,11 +100,11 @@ /* fills up a fishead_packet from a fishead ogg_packet of a skeleton bistream */ fishead_packet fishead_from_ogg(ogg_packet *op) { - + fishead_packet fp; if (memcmp(op->packet, FISHEAD_IDENTIFIER, 8)) - ; /* invalid packet what do we do? */ + ; /* invalid packet what do we do? */ fp.version_major = *((ogg_uint16_t*)(op->packet+8)); /* version major */ fp.version_minor = *((ogg_uint16_t*)(op->packet+10)); /* version minor */ @@ -121,9 +121,9 @@ fisbone_packet fisbone_from_ogg(ogg_packet *op) { fisbone_packet fp; - + if (memcmp(op->packet, FISBONE_IDENTIFIER, 8)) - ; /* invalid value, what do we do? */ + ; /* invalid value, what do we do? */ fp.serial_no = *((ogg_uint32_t*)(op->packet+12)); /* serialno of the stream represented by this fisbone packet */ fp.nr_header_packet = *((ogg_uint32_t*)(op->packet+16)); /* number of header packets */ fp.granule_rate_n = *((ogg_int64_t*)(op->packet+20)); /* granulrate numerator */ diff -Nru speex-1.2~rc1.2/src/speexdec.c speex-1.2.0/src/speexdec.c --- speex-1.2~rc1.2/src/speexdec.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/src/speexdec.c 2015-07-23 18:05:56.000000000 +0000 @@ -1,21 +1,21 @@ -/* Copyright (C) 2002-2006 Jean-Marc Valin +/* Copyright (C) 2002-2006 Jean-Marc Valin File: speexdec.c Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -46,7 +46,6 @@ #include #include -#include #include #if defined WIN32 || defined _WIN32 @@ -81,23 +80,23 @@ #include #include "wav_io.h" -#include -#include -#include +#include "speex/speex_header.h" +#include "speex/speex_stereo.h" +#include "speex/speex_callbacks.h" #define MAX_FRAME_SIZE 2000 #define readint(buf, base) (((buf[base+3]<<24)&0xff000000)| \ ((buf[base+2]<<16)&0xff0000)| \ ((buf[base+1]<<8)&0xff00)| \ - (buf[base]&0xff)) + (buf[base]&0xff)) static void print_comments(char *comments, int length) { char *c=comments; int len, i, nb_fields; char *end; - + if (length<8) { fprintf (stderr, "Invalid/corrupted comments\n"); @@ -153,7 +152,7 @@ if (audio_fd<0) { perror("Cannot open /dev/dsp"); - exit(1); + exit(1); } format=AFMT_S16_NE; @@ -190,7 +189,7 @@ #elif defined HAVE_SYS_AUDIOIO_H audio_info_t info; int audio_fd; - + audio_fd = open("/dev/audio", O_WRONLY); if (audio_fd<0) { @@ -206,7 +205,7 @@ info.play.precision = 16; info.play.sample_rate = rate; info.play.channels = *channels; - + if (ioctl(audio_fd, AUDIO_SETINFO, &info) < 0) { perror ("AUDIO_SETINFO"); @@ -236,7 +235,7 @@ #endif fout=stdout; } - else + else { fout = fopen(outFile, "wb"); if (!fout) @@ -260,13 +259,13 @@ printf ("input_file can be:\n"); printf (" filename.spx regular Speex file\n"); printf (" - stdin\n"); - printf ("\n"); + printf ("\n"); printf ("output_file can be:\n"); printf (" filename.wav Wav file\n"); printf (" filename.* Raw PCM file (any extension other that .wav)\n"); printf (" - stdout\n"); printf (" (nothing) Will be played to soundcard\n"); - printf ("\n"); + printf ("\n"); printf ("Options:\n"); printf (" --enh Enable perceptual enhancement (default)\n"); printf (" --no-enh Disable perceptual enhancement\n"); @@ -277,7 +276,7 @@ printf (" --stereo Force decoding in stereo\n"); printf (" --rate n Force decoding at sampling rate n Hz\n"); printf (" --packet-loss n Simulate n %% random packet loss\n"); - printf (" -V Verbose mode (show bit-rate)\n"); + printf (" -V Verbose mode (show bit-rate)\n"); printf (" -h, --help This help\n"); printf (" -v, --version Version information\n"); printf (" --pf Deprecated, use --enh instead\n"); @@ -311,7 +310,7 @@ SpeexHeader *header; int modeID; SpeexCallback callback; - + header = speex_packet_to_header((char*)op->packet, op->bytes); if (!header) { @@ -320,18 +319,18 @@ } if (header->mode >= SPEEX_NB_MODES || header->mode<0) { - fprintf (stderr, "Mode number %d does not (yet/any longer) exist in this version\n", + fprintf (stderr, "Mode number %d does not (yet/any longer) exist in this version\n", header->mode); free(header); return NULL; } - + modeID = header->mode; if (forceMode!=-1) modeID = forceMode; mode = speex_lib_get_mode (modeID); - + if (header->speex_version_id > 1) { fprintf (stderr, "This file was encoded with Speex bit-stream version %d, which I don't know how to decode\n", header->speex_version_id); @@ -345,13 +344,13 @@ free(header); return NULL; } - if (mode->bitstream_version > header->mode_bitstream_version) + if (mode->bitstream_version > header->mode_bitstream_version) { fprintf (stderr, "The file was encoded with an older version of Speex. You would need to downgrade the version in order to play it.\n"); free(header); return NULL; } - + st = speex_decoder_init(mode); if (!st) { @@ -396,22 +395,22 @@ callback.data = stereo; speex_decoder_ctl(st, SPEEX_SET_HANDLER, &callback); } - + if (!quiet) { - fprintf (stderr, "Decoding %d Hz audio using %s mode", + fprintf (stderr, "Decoding %d Hz audio using %s mode", *rate, mode->modeName); if (*channels==1) fprintf (stderr, " (mono"); else fprintf (stderr, " (stereo"); - + if (header->vbr) fprintf (stderr, ", VBR)\n"); else fprintf(stderr, ")\n"); - /*fprintf (stderr, "Decoding %d Hz audio at %d bps using %s mode\n", + /*fprintf (stderr, "Decoding %d Hz audio at %d bps using %s mode\n", *rate, mode->bitrate, mode->modeName);*/ } @@ -485,7 +484,7 @@ long_options, &option_index); if (c==-1) break; - + switch(c) { case 0: @@ -580,7 +579,7 @@ #endif fin=stdin; } - else + else { fin = fopen(inFile, "rb"); if (!fin) @@ -594,10 +593,10 @@ /*Init Ogg data struct*/ ogg_sync_init(&oy); - + speex_bits_init(&bits); /*Main decoding loop*/ - + while (1) { char *data; @@ -605,7 +604,7 @@ /*Get the ogg buffer for writing*/ data = ogg_sync_buffer(&oy, 200); /*Read bitstream from input file*/ - nb_read = fread(data, sizeof(char), 200, fin); + nb_read = fread(data, sizeof(char), 200, fin); ogg_sync_wrote(&oy, nb_read); /*Loop for all complete pages we got (most likely only one)*/ @@ -616,10 +615,10 @@ ogg_stream_init(&os, ogg_page_serialno(&og)); stream_init = 1; } - if (ogg_page_serialno(&og) != os.serialno) { - /* so all streams are read. */ - ogg_stream_reset_serialno(&os, ogg_page_serialno(&og)); - } + if (ogg_page_serialno(&og) != os.serialno) { + /* so all streams are read. */ + ogg_stream_reset_serialno(&os, ogg_page_serialno(&og)); + } /*Add page to the bitstream*/ ogg_stream_pagein(&os, &og); page_granule = ogg_page_granulepos(&og); @@ -642,11 +641,11 @@ packet_no=0; while (!eos && ogg_stream_packetout(&os, &op) == 1) { - if (op.bytes>=5 && !memcmp(op.packet, "Speex", 5)) { - speex_serialno = os.serialno; - } - if (speex_serialno == -1 || os.serialno != speex_serialno) - break; + if (op.bytes>=5 && !memcmp(op.packet, "Speex", 5)) { + speex_serialno = os.serialno; + } + if (speex_serialno == -1 || os.serialno != speex_serialno) + break; /*If first packet, process as Speex header*/ if (packet_count==0) { @@ -674,7 +673,7 @@ /*End of stream condition*/ if (op.e_o_s && os.serialno == speex_serialno) /* don't care for anything except speex eos */ eos=1; - + /*Copy Ogg packet to Speex bitstream*/ speex_bits_read_from(&bits, (char*)op.packet, op.bytes); for (j=0;j!=nframes;j++) @@ -712,14 +711,14 @@ fprintf (stderr, "Bitrate is use: %d bps ", tmp); } /*Convert to short and save to output file*/ - if (strlen(outFile)!=0) + if (strlen(outFile)!=0) { for (i=0;i0) - { + { #if defined WIN32 || defined _WIN32 if (strlen(outFile)==0) WIN_Play_Samples (out+frame_offset*channels, sizeof(short) * new_frame_size*channels); else #endif fwrite(out+frame_offset*channels, sizeof(short), new_frame_size*channels, fout); - + audio_size+=sizeof(short)*new_frame_size*channels; } } @@ -785,7 +784,7 @@ if (st) speex_decoder_destroy(st); - else + else { fprintf (stderr, "This doesn't look like a Speex file\n"); } @@ -802,7 +801,7 @@ if (close_in) fclose(fin); if (fout != NULL) - fclose(fout); + fclose(fout); return 0; } diff -Nru speex-1.2~rc1.2/src/speexenc.c speex-1.2.0/src/speexenc.c --- speex-1.2~rc1.2/src/speexenc.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/src/speexenc.c 2015-07-23 18:05:56.000000000 +0000 @@ -1,21 +1,21 @@ -/* Copyright (C) 2002-2006 Jean-Marc Valin +/* Copyright (C) 2002-2006 Jean-Marc Valin File: speexenc.c Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -47,12 +47,14 @@ #include #include -#include +#include "speex/speex.h" +#include "speex/speex_header.h" +#include "speex/speex_stereo.h" #include #include "wav_io.h" -#include -#include +#ifdef USE_SPEEXDSP #include +#endif #if defined WIN32 || defined _WIN32 /* We need the following two to set stdout to binary */ @@ -73,7 +75,7 @@ int written; written = fwrite(page->header,1,page->header_len, fp); written += fwrite(page->body,1,page->body_len, fp); - + return written; } @@ -82,29 +84,45 @@ /* Convert input audio bits, endians and channels */ static int read_samples(FILE *fin,int frame_size, int bits, int channels, int lsb, short * input, char *buff, spx_int32_t *size) -{ +{ unsigned char in[MAX_FRAME_BYTES*2]; int i; short *s; int nb_read; + size_t to_read; if (size && *size<=0) { return 0; } + + to_read = bits/8*channels*frame_size; + /*Read input audio*/ if (size) - *size -= bits/8*channels*frame_size; + { + if (*size >= to_read) + { + *size -= to_read; + } + else + { + to_read = *size; + *size = 0; + } + } + if (buff) { for (i=0;i<12;i++) in[i]=buff[i]; - nb_read = fread(in+12,1,bits/8*channels*frame_size-12, fin) + 12; + nb_read = fread(in+12,1,to_read-12,fin) + 12; if (size) *size += 12; } else { - nb_read = fread(in,1,bits/8*channels* frame_size, fin); + nb_read = fread(in,1,to_read,fin); } + nb_read /= bits/8*channels; /*fprintf (stderr, "%d\n", nb_read);*/ @@ -124,8 +142,8 @@ /* convert to our endian format */ for(i=0;imodeName, st_string); } - /*fprintf (stderr, "Encoding %d Hz audio at %d bps using %s mode\n", + /*fprintf (stderr, "Encoding %d Hz audio at %d bps using %s mode\n", header.rate, mode->bitrate, mode->modeName);*/ /*Initialize Speex encoder*/ @@ -637,7 +679,7 @@ #endif fout=stdout; } - else + else { fout = fopen(outFile, "wb"); if (!fout) @@ -696,8 +738,11 @@ speex_encoder_ctl(st, SPEEX_SET_ABR, &abr_enabled); } + speex_encoder_ctl(st, SPEEX_SET_HIGHPASS, &highpass_enabled); + speex_encoder_ctl(st, SPEEX_GET_LOOKAHEAD, &lookahead); - + +#ifdef USE_SPEEXDSP if (denoise_enabled || agc_enabled) { preprocess = speex_preprocess_state_init(frame_size, rate); @@ -705,16 +750,16 @@ speex_preprocess_ctl(preprocess, SPEEX_PREPROCESS_SET_AGC, &agc_enabled); lookahead += frame_size; } - +#endif /* first packet should be the skeleton header. */ if (with_skeleton) { add_fishead_packet(&so); if ((ret = flush_ogg_stream_to_file(&so, fout))) { - fprintf (stderr,"Error: failed skeleton (fishead) header to output stream\n"); + fprintf (stderr,"Error: failed skeleton (fishead) header to output stream\n"); exit(1); } else - bytes_written += ret; + bytes_written += ret; } /*Write header*/ @@ -755,10 +800,10 @@ if (with_skeleton) { add_fisbone_packet(&so, os.serialno, &header); if ((ret = flush_ogg_stream_to_file(&so, fout))) { - fprintf (stderr,"Error: failed writing skeleton (fisbone )header to output stream\n"); + fprintf (stderr,"Error: failed writing skeleton (fisbone )header to output stream\n"); exit(1); } else - bytes_written += ret; + bytes_written += ret; } /* writing the rest of the speex header packets */ @@ -784,7 +829,7 @@ fprintf (stderr,"Error: failed writing skeleton header to output stream\n"); exit(1); } else - bytes_written += ret; + bytes_written += ret; } @@ -808,11 +853,12 @@ if (chan==2) speex_encode_stereo_int(input, frame_size, &bits); +#ifdef USE_SPEEXDSP if (preprocess) speex_preprocess(preprocess, input, NULL); - +#endif speex_encode_int(st, input, &bits); - + nb_encoded += frame_size; if (print_bitrate) { int tmp; @@ -827,8 +873,10 @@ fprintf (stderr, "Bitrate is use: %d bps (average %d bps) ", tmp, (int)(cumul_bits/enc_frames)); else fprintf (stderr, "Bitrate is use: %d bps ", tmp); + if (output_rate) + printf ("%d\n", tmp); } - + } if (wave_input) @@ -923,8 +971,8 @@ return 0; } -/* - Comments will be stored in the Vorbis style. +/* + Comments will be stored in the Vorbis style. It is describled in the "Structure" section of http://www.xiph.org/ogg/vorbis/doc/v-comment.html @@ -946,7 +994,7 @@ #define readint(buf, base) (((buf[base+3]<<24)&0xff000000)| \ ((buf[base+2]<<16)&0xff0000)| \ ((buf[base+1]<<8)&0xff00)| \ - (buf[base]&0xff)) + (buf[base]&0xff)) #define writeint(buf, base, val) do{ buf[base+3]=((val)>>24)&0xff; \ buf[base+2]=((val)>>16)&0xff; \ buf[base+1]=((val)>>8)&0xff; \ diff -Nru speex-1.2~rc1.2/src/wave_out.c speex-1.2.0/src/wave_out.c --- speex-1.2~rc1.2/src/wave_out.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/src/wave_out.c 2016-09-08 04:50:40.000000000 +0000 @@ -1,220 +1,220 @@ -/* Copyright (c) 2002, John Edwards - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - - Neither the name of the Xiph.org Foundation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR - CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -/* Set TABS = 4 */ -/******************************************************************** - - function: To provide playback of 16 bit PCM wave data in Win32 - environments from decoded compressed files. - - ********************************************************************/ - -#if defined WIN32 || defined _WIN32 - -#include -#include -#include "wave_out.h" - -#define MAXWAVESIZE 4294967040LU -#define MAX_WAVEBLOCKS 32 - -// This is modified for USE_WIN_AUDIO - ONLY 2002-02-27 - - -static CRITICAL_SECTION cs; -static HWAVEOUT dev = NULL; -static int ScheduledBlocks = 0; -static int PlayedWaveHeadersCount = 0; // free index -static WAVEHDR* PlayedWaveHeaders [MAX_WAVEBLOCKS]; - -static int -Box ( const char* msg ) -{ - MessageBox ( NULL, msg, " "VERSION_STRING": Error Message . . .", MB_OK | MB_ICONEXCLAMATION ); - return -1; -} - - -/* - * This function registers already played WAVE chunks. Freeing is done by free_memory(), - */ - -static void CALLBACK -wave_callback ( HWAVE hWave, UINT uMsg, DWORD dwInstance, DWORD dwParam1, DWORD dwParam2 ) -{ - if ( uMsg == WOM_DONE ) { - EnterCriticalSection ( &cs ); - PlayedWaveHeaders [PlayedWaveHeadersCount++] = (WAVEHDR*) dwParam1; - LeaveCriticalSection ( &cs ); - } -} - - -static void -free_memory ( void ) -{ - WAVEHDR* wh; - HGLOBAL hg; - - EnterCriticalSection ( &cs ); - wh = PlayedWaveHeaders [--PlayedWaveHeadersCount]; - ScheduledBlocks--; // decrease the number of USED blocks - LeaveCriticalSection ( &cs ); - - waveOutUnprepareHeader ( dev, wh, sizeof (WAVEHDR) ); - - hg = GlobalHandle ( wh -> lpData ); // Deallocate the buffer memory - GlobalUnlock (hg); - GlobalFree (hg); - - hg = GlobalHandle ( wh ); // Deallocate the header memory - GlobalUnlock (hg); - GlobalFree (hg); -} - - -Int -Set_WIN_Params ( FILE_T dummyFile , - Ldouble SampleFreq, - Uint BitsPerSample, - Uint Channels ) -{ - WAVEFORMATEX outFormat; - UINT deviceID = WAVE_MAPPER; - - (void) dummyFile; - - if ( waveOutGetNumDevs () == 0 ) - return Box ( "No audio device present." ); - - outFormat.wFormatTag = WAVE_FORMAT_PCM; - outFormat.wBitsPerSample = BitsPerSample; - outFormat.nChannels = Channels; - outFormat.nSamplesPerSec = (unsigned long)(SampleFreq + 0.5); - outFormat.nBlockAlign = (outFormat.wBitsPerSample + 7) / 8 * outFormat.nChannels; - outFormat.nAvgBytesPerSec = outFormat.nSamplesPerSec * outFormat.nBlockAlign; - - switch ( waveOutOpen ( &dev, deviceID, &outFormat, (DWORD)wave_callback, 0, CALLBACK_FUNCTION ) ) - { - case MMSYSERR_ALLOCATED: return Box ( "Device is already open." ); - case MMSYSERR_BADDEVICEID: return Box ( "The specified device is out of range." ); - case MMSYSERR_NODRIVER: return Box ( "There is no audio driver in this system." ); - case MMSYSERR_NOMEM: return Box ( "Unable to allocate sound memory." ); - case WAVERR_BADFORMAT: return Box ( "This audio format is not supported." ); - case WAVERR_SYNC: return Box ( "The device is synchronous." ); - default: return Box ( "Unknown media error." ); - case MMSYSERR_NOERROR: break; - } - - waveOutReset ( dev ); - InitializeCriticalSection ( &cs ); - SetPriorityClass ( GetCurrentProcess (), HIGH_PRIORITY_CLASS ); - return 0; -} - - -int -WIN_Play_Samples ( const void* data, size_t len ) -{ - HGLOBAL hg; - HGLOBAL hg2; - LPWAVEHDR wh; - void* allocptr; - - do { - while ( PlayedWaveHeadersCount > 0 ) // free used blocks ... - free_memory (); - - if ( ScheduledBlocks < sizeof(PlayedWaveHeaders)/sizeof(*PlayedWaveHeaders) ) // wait for a free block ... - break; - Sleep (26); - } while (1); - - if ( (hg2 = GlobalAlloc ( GMEM_MOVEABLE, len )) == NULL ) // allocate some memory for a copy of the buffer - return Box ( "GlobalAlloc failed." ); - - allocptr = GlobalLock (hg2); - CopyMemory ( allocptr, data, len ); // Here we can call any modification output functions we want.... - - if ( (hg = GlobalAlloc (GMEM_MOVEABLE | GMEM_ZEROINIT, sizeof (WAVEHDR))) == NULL ) // now make a header and WRITE IT! - return -1; - - wh = GlobalLock (hg); - wh -> dwBufferLength = len; - wh -> lpData = allocptr; - - if ( waveOutPrepareHeader ( dev, wh, sizeof (WAVEHDR)) != MMSYSERR_NOERROR ) { - GlobalUnlock (hg); - GlobalFree (hg); - return -1; - } - - if ( waveOutWrite ( dev, wh, sizeof (WAVEHDR)) != MMSYSERR_NOERROR ) { - GlobalUnlock (hg); - GlobalFree (hg); - return -1; - } - - EnterCriticalSection ( &cs ); - ScheduledBlocks++; - LeaveCriticalSection ( &cs ); - - return len; -} - - -int -WIN_Audio_close ( void ) -{ - if ( dev != NULL ) { - - while ( ScheduledBlocks > 0 ) { - Sleep (ScheduledBlocks); - while ( PlayedWaveHeadersCount > 0 ) // free used blocks ... - free_memory (); - } - - waveOutReset (dev); // reset the device - waveOutClose (dev); // close the device - dev = NULL; - } - - DeleteCriticalSection ( &cs ); - ScheduledBlocks = 0; - return 0; -} - -#endif - -/* end of wave_out.c */ +/* Copyright (c) 2002, John Edwards + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + - Neither the name of the Xiph.org Foundation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +#ifdef HAVE_CONFIG_H +# include "config.h" +#endif + +/* Set TABS = 4 */ +/******************************************************************** + + function: To provide playback of 16 bit PCM wave data in Win32 + environments from decoded compressed files. + + ********************************************************************/ + +#if defined WIN32 || defined _WIN32 + +#include +#include +#include "wave_out.h" + +#define MAXWAVESIZE 4294967040LU +#define MAX_WAVEBLOCKS 32 + +// This is modified for USE_WIN_AUDIO - ONLY 2002-02-27 + + +static CRITICAL_SECTION cs; +static HWAVEOUT dev = NULL; +static int ScheduledBlocks = 0; +static int PlayedWaveHeadersCount = 0; // free index +static WAVEHDR* PlayedWaveHeaders [MAX_WAVEBLOCKS]; + +static int +Box ( const char* msg ) +{ + MessageBox ( NULL, msg, " "VERSION_STRING": Error Message . . .", MB_OK | MB_ICONEXCLAMATION ); + return -1; +} + + +/* + * This function registers already played WAVE chunks. Freeing is done by free_memory(), + */ + +static void CALLBACK +wave_callback ( HWAVEOUT hWave, UINT uMsg, DWORD_PTR dwInstance, DWORD_PTR dwParam1, DWORD_PTR dwParam2 ) +{ + if ( uMsg == WOM_DONE ) { + EnterCriticalSection ( &cs ); + PlayedWaveHeaders [PlayedWaveHeadersCount++] = (WAVEHDR*) dwParam1; + LeaveCriticalSection ( &cs ); + } +} + + +static void +free_memory ( void ) +{ + WAVEHDR* wh; + HGLOBAL hg; + + EnterCriticalSection ( &cs ); + wh = PlayedWaveHeaders [--PlayedWaveHeadersCount]; + ScheduledBlocks--; // decrease the number of USED blocks + LeaveCriticalSection ( &cs ); + + waveOutUnprepareHeader ( dev, wh, sizeof (WAVEHDR) ); + + hg = GlobalHandle ( wh -> lpData ); // Deallocate the buffer memory + GlobalUnlock (hg); + GlobalFree (hg); + + hg = GlobalHandle ( wh ); // Deallocate the header memory + GlobalUnlock (hg); + GlobalFree (hg); +} + + +Int +Set_WIN_Params ( FILE_T dummyFile , + Ldouble SampleFreq, + Uint BitsPerSample, + Uint Channels ) +{ + WAVEFORMATEX outFormat; + UINT deviceID = WAVE_MAPPER; + + (void) dummyFile; + + if ( waveOutGetNumDevs () == 0 ) + return Box ( "No audio device present." ); + + outFormat.wFormatTag = WAVE_FORMAT_PCM; + outFormat.wBitsPerSample = BitsPerSample; + outFormat.nChannels = Channels; + outFormat.nSamplesPerSec = (unsigned long)(SampleFreq + 0.5); + outFormat.nBlockAlign = (outFormat.wBitsPerSample + 7) / 8 * outFormat.nChannels; + outFormat.nAvgBytesPerSec = outFormat.nSamplesPerSec * outFormat.nBlockAlign; + + switch ( waveOutOpen ( &dev, deviceID, &outFormat, (DWORD_PTR)wave_callback, 0, CALLBACK_FUNCTION ) ) + { + case MMSYSERR_ALLOCATED: return Box ( "Device is already open." ); + case MMSYSERR_BADDEVICEID: return Box ( "The specified device is out of range." ); + case MMSYSERR_NODRIVER: return Box ( "There is no audio driver in this system." ); + case MMSYSERR_NOMEM: return Box ( "Unable to allocate sound memory." ); + case WAVERR_BADFORMAT: return Box ( "This audio format is not supported." ); + case WAVERR_SYNC: return Box ( "The device is synchronous." ); + default: return Box ( "Unknown media error." ); + case MMSYSERR_NOERROR: break; + } + + waveOutReset ( dev ); + InitializeCriticalSection ( &cs ); + SetPriorityClass ( GetCurrentProcess (), HIGH_PRIORITY_CLASS ); + return 0; +} + + +int +WIN_Play_Samples ( const void* data, size_t len ) +{ + HGLOBAL hg; + HGLOBAL hg2; + LPWAVEHDR wh; + void* allocptr; + + do { + while ( PlayedWaveHeadersCount > 0 ) // free used blocks ... + free_memory (); + + if ( ScheduledBlocks < sizeof(PlayedWaveHeaders)/sizeof(*PlayedWaveHeaders) ) // wait for a free block ... + break; + Sleep (26); + } while (1); + + if ( (hg2 = GlobalAlloc ( GMEM_MOVEABLE, len )) == NULL ) // allocate some memory for a copy of the buffer + return Box ( "GlobalAlloc failed." ); + + allocptr = GlobalLock (hg2); + CopyMemory ( allocptr, data, len ); // Here we can call any modification output functions we want.... + + if ( (hg = GlobalAlloc (GMEM_MOVEABLE | GMEM_ZEROINIT, sizeof (WAVEHDR))) == NULL ) // now make a header and WRITE IT! + return -1; + + wh = GlobalLock (hg); + wh -> dwBufferLength = len; + wh -> lpData = allocptr; + + if ( waveOutPrepareHeader ( dev, wh, sizeof (WAVEHDR)) != MMSYSERR_NOERROR ) { + GlobalUnlock (hg); + GlobalFree (hg); + return -1; + } + + if ( waveOutWrite ( dev, wh, sizeof (WAVEHDR)) != MMSYSERR_NOERROR ) { + GlobalUnlock (hg); + GlobalFree (hg); + return -1; + } + + EnterCriticalSection ( &cs ); + ScheduledBlocks++; + LeaveCriticalSection ( &cs ); + + return len; +} + + +int +WIN_Audio_close ( void ) +{ + if ( dev != NULL ) { + + while ( ScheduledBlocks > 0 ) { + Sleep (ScheduledBlocks); + while ( PlayedWaveHeadersCount > 0 ) // free used blocks ... + free_memory (); + } + + waveOutReset (dev); // reset the device + waveOutClose (dev); // close the device + dev = NULL; + } + + DeleteCriticalSection ( &cs ); + ScheduledBlocks = 0; + return 0; +} + +#endif + +/* end of wave_out.c */ diff -Nru speex-1.2~rc1.2/src/wave_out.h speex-1.2.0/src/wave_out.h --- speex-1.2~rc1.2/src/wave_out.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/src/wave_out.h 2015-07-06 15:02:09.000000000 +0000 @@ -1,71 +1,71 @@ -/* Copyright (c) 2002, John Edwards - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - - Neither the name of the Xiph.org Foundation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR - CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -// WAVE_OUT.H - Necessary stuff for WIN_AUDIO - -#ifndef WAVE_OUT_H -#define WAVE_OUT_H - -#include -#include -#ifdef __MINGW32__ -#include -#endif - -#define VERSION_STRING "\n 0.7.0\n" - -#define Cdecl __cdecl -#define __attribute__(x) -#define sleep(__sec) Sleep ((__sec) * 1000) -#define inline __inline -#define restrict - -//// constants ///////////////////////////////////////////////////// - -#define CD_SAMPLE_FREQ 44.1e3 -#define SAMPLE_SIZE 16 -#define SAMPLE_SIZE_STRING "" -#define WINAUDIO_FD ((FILE_T)-128) -#define FILE_T FILE* -#define INVALID_FILEDESC NULL - -//// Simple types ////////////////////////////////////////////////// - -typedef signed int Int; // at least -32767...+32767, fast type -typedef unsigned int Uint; // at least 0...65535, fast type -typedef long double Ldouble; // most exact floating point format - -//// procedures/functions ////////////////////////////////////////// -// wave_out.c -Int Set_WIN_Params ( FILE_T dummyFile , Ldouble SampleFreq, Uint BitsPerSample, Uint Channels); -int WIN_Play_Samples ( const void* buff, size_t len ); -int WIN_Audio_close ( void ); - -#endif /* WAVE_OUT_H */ +/* Copyright (c) 2002, John Edwards + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + - Neither the name of the Xiph.org Foundation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +// WAVE_OUT.H - Necessary stuff for WIN_AUDIO + +#ifndef WAVE_OUT_H +#define WAVE_OUT_H + +#include +#include +#ifdef __MINGW32__ +#include +#endif + +#define VERSION_STRING "\n 0.7.0\n" + +#define Cdecl __cdecl +#define __attribute__(x) +#define sleep(__sec) Sleep ((__sec) * 1000) +#define inline __inline +#define restrict + +//// constants ///////////////////////////////////////////////////// + +#define CD_SAMPLE_FREQ 44.1e3 +#define SAMPLE_SIZE 16 +#define SAMPLE_SIZE_STRING "" +#define WINAUDIO_FD ((FILE_T)-128) +#define FILE_T FILE* +#define INVALID_FILEDESC NULL + +//// Simple types ////////////////////////////////////////////////// + +typedef signed int Int; // at least -32767...+32767, fast type +typedef unsigned int Uint; // at least 0...65535, fast type +typedef long double Ldouble; // most exact floating point format + +//// procedures/functions ////////////////////////////////////////// +// wave_out.c +Int Set_WIN_Params ( FILE_T dummyFile , Ldouble SampleFreq, Uint BitsPerSample, Uint Channels); +int WIN_Play_Samples ( const void* buff, size_t len ); +int WIN_Audio_close ( void ); + +#endif /* WAVE_OUT_H */ diff -Nru speex-1.2~rc1.2/src/wav_io.c speex-1.2.0/src/wav_io.c --- speex-1.2~rc1.2/src/wav_io.c 2022-05-16 09:20:33.000000000 +0000 +++ speex-1.2.0/src/wav_io.c 2015-07-23 18:05:56.000000000 +0000 @@ -1,22 +1,22 @@ -/* Copyright (C) 2002 Jean-Marc Valin +/* Copyright (C) 2002 Jean-Marc Valin File: wav_io.c Routines to handle wav (RIFF) headers Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -36,7 +36,6 @@ #include #include -#include "speex/speex_types.h" #include "wav_io.h" @@ -91,12 +90,12 @@ fprintf (stderr, "Corrupted WAVE file: no \"fmt \"\n"); return -1; }*/ - + fread(&itmp, 4, 1, file); itmp = le_int(itmp); skip_bytes=itmp-16; /*fprintf (stderr, "skip=%d\n", skip_bytes);*/ - + fread(&stmp, 2, 1, file); stmp = le_short(stmp); if (stmp!=1) @@ -108,8 +107,8 @@ fread(&stmp, 2, 1, file); stmp = le_short(stmp); *channels = stmp; - - if (stmp>2 || stmp<1) + + if (stmp>2) { fprintf (stderr, "Only mono and (intensity) stereo supported\n"); return -1; @@ -151,7 +150,7 @@ return -1; } - + /*strange way of seeking, but it works even for pipes*/ if (skip_bytes>0) for (i=0;i> 8)) -#endif +#endif /** Convert little endian */ static inline spx_int32_t le_int(spx_int32_t i) diff -Nru speex-1.2~rc1.2/symbian/bld.inf speex-1.2.0/symbian/bld.inf --- speex-1.2~rc1.2/symbian/bld.inf 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/symbian/bld.inf 2015-07-06 15:02:15.000000000 +0000 @@ -35,11 +35,8 @@ ..\include\speex\speex_bits.h \epoc32\include\speex\speex_bits.h ..\include\speex\speex_callbacks.h \epoc32\include\speex\speex_callbacks.h ..\include\speex\speex_config_types.h \epoc32\include\speex\speex_config_types.h -..\include\speex\speex_echo.h \epoc32\include\speex\speex_echo.h ..\include\speex\speex.h \epoc32\include\speex\speex.h ..\include\speex\speex_header.h \epoc32\include\speex\speex_header.h -..\include\speex\speex_jitter.h \epoc32\include\speex\speex_jitter.h -..\include\speex\speex_preprocess.h \epoc32\include\speex\speex_preprocess.h ..\include\speex\speex_stereo.h \epoc32\include\speex\speex_stereo.h ..\include\speex\speex_types.h \epoc32\include\speex\speex_types.h diff -Nru speex-1.2~rc1.2/symbian/Makefile.in speex-1.2.0/symbian/Makefile.in --- speex-1.2~rc1.2/symbian/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/symbian/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = symbian -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu symbian/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign symbian/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu symbian/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign symbian/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/symbian/speex.mmp speex-1.2.0/symbian/speex.mmp --- speex-1.2~rc1.2/symbian/speex.mmp 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/symbian/speex.mmp 2015-07-06 15:02:15.000000000 +0000 @@ -36,10 +36,10 @@ MACRO HAVE_CONFIG_H SOURCEPATH ..\libspeex SOURCE bits.c cb_search.c exc_5_64_table.c exc_5_256_table.c exc_8_128_table.c -SOURCE exc_10_16_table.c exc_10_32_table.c exc_20_32_table.c fftwrap.c kiss_fft.c kiss_fftr.c filterbank.c filters.c gain_table.c -SOURCE gain_table_lbr.c hexc_10_32_table.c hexc_table.c high_lsp_tables.c jitter.c -SOURCE lbr_48k_tables.c lpc.c lsp.c lsp_tables_nb.c ltp.c math_approx.c mdf.c misc.c -SOURCE modes.c nb_celp.c preprocess.c quant_lsp.c sb_celp.c smallft.c +SOURCE exc_10_16_table.c exc_10_32_table.c exc_20_32_table.c fftwrap.c kiss_fft.c kiss_fftr.c filters.c gain_table.c +SOURCE gain_table_lbr.c hexc_10_32_table.c hexc_table.c high_lsp_tables.c +SOURCE lbr_48k_tables.c lpc.c lsp.c lsp_tables_nb.c ltp.c math_approx.c misc.c +SOURCE modes.c nb_celp.c quant_lsp.c sb_celp.c smallft.c SOURCE speex.c speex_callbacks.c speex_header.c stereo.c vbr.c vq.c window.c USERINCLUDE . ..\include\speex SYSTEMINCLUDE \epoc32\include \epoc32\include\libc ..\include diff -Nru speex-1.2~rc1.2/ti/config.h speex-1.2.0/ti/config.h --- speex-1.2~rc1.2/ti/config.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/ti/config.h 2015-07-06 15:01:57.000000000 +0000 @@ -6,18 +6,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -34,9 +34,10 @@ #define FIXED_POINT #define FRAME_SIZE 160 #define DISABLE_WIDEBAND +#define EXPORT /* Disable DC block if doing SNR testing */ -#define DISABLE_HIGHPASS +#define DISABLE_HIGHPASS /* Allow for 2 20ms narrowband blocks per frame, plus a couple of bytes */ #define MAX_CHARS_PER_FRAME (42/BYTES_PER_CHAR) @@ -54,7 +55,7 @@ //#undef MANUAL_ALLOC //#undef OS_SUPPORT_CUSTOM -#if defined (CONFIG_TI_C54X) || defined (CONFIG_TI_C55X) +#if defined (CONFIG_TI_C54X) || defined (CONFIG_TI_C55X) //#define PRECISION16 // These values determined by analysis for 8kbps narrowband diff -Nru speex-1.2~rc1.2/ti/Makefile.in speex-1.2.0/ti/Makefile.in --- speex-1.2~rc1.2/ti/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/ti/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = ti -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -146,6 +159,7 @@ ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -202,6 +216,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -209,12 +224,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -244,12 +261,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -294,9 +316,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -317,10 +339,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu ti/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ti/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu ti/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign ti/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -615,6 +636,8 @@ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/ti/speex_C54_test/Makefile.in speex-1.2.0/ti/speex_C54_test/Makefile.in --- speex-1.2~rc1.2/ti/speex_C54_test/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/ti/speex_C54_test/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = ti/speex_C54_test -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu ti/speex_C54_test/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ti/speex_C54_test/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu ti/speex_C54_test/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign ti/speex_C54_test/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/ti/speex_C55_test/Makefile.in speex-1.2.0/ti/speex_C55_test/Makefile.in --- speex-1.2~rc1.2/ti/speex_C55_test/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/ti/speex_C55_test/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = ti/speex_C55_test -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu ti/speex_C55_test/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ti/speex_C55_test/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu ti/speex_C55_test/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign ti/speex_C55_test/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/ti/speex_C64_test/Makefile.in speex-1.2.0/ti/speex_C64_test/Makefile.in --- speex-1.2~rc1.2/ti/speex_C64_test/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/ti/speex_C64_test/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = ti/speex_C64_test -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu ti/speex_C64_test/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ti/speex_C64_test/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu ti/speex_C64_test/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign ti/speex_C64_test/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/ti/testenc-TI-C5x.c speex-1.2.0/ti/testenc-TI-C5x.c --- speex-1.2~rc1.2/ti/testenc-TI-C5x.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/ti/testenc-TI-C5x.c 2015-07-06 15:01:57.000000000 +0000 @@ -8,18 +8,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -52,7 +52,7 @@ //#define TESTENC_BYTES_PER_FRAME 28 /* 11kbps */ //#define TESTENC_QUALITY 5 /* 11 kbps */ -/* For narrowband, QUALITY maps to these bit rates (see modes.c, manual.pdf) +/* For narrowband, QUALITY maps to these bit rates (see modes.c, manual.pdf) * {1, 8, 2, 3, 3, 4, 4, 5, 5, 6, 7} * 0 -> 2150 * 1 -> 3950 @@ -72,12 +72,12 @@ #include #ifdef MANUAL_ALLOC -/* Take all Speex space from this private heap */ +/* Take all Speex space from this private heap */ /* This is useful for multichannel applications */ -#pragma DATA_SECTION(spxHeap, ".myheap"); +#pragma DATA_SECTION(spxHeap, ".myheap"); static char spxHeap[SPEEX_PERSIST_STACK_SIZE]; -#pragma DATA_SECTION(spxScratch, ".myheap"); +#pragma DATA_SECTION(spxScratch, ".myheap"); static char spxScratch[SPEEX_SCRATCH_STACK_SIZE]; char *spxGlobalHeapPtr, *spxGlobalHeapEnd; @@ -88,7 +88,7 @@ { short *pIn, *pOut, sNext; int i; - + pIn = pInBuf; pOut = pOutBuf; for(i=0;i> 8); } } - + void main() { char *outFile, *bitsFile; @@ -140,7 +140,7 @@ spx_int32_t skip_group_delay; SpeexCallback callback; - /* C54xx defaults to max wait states, even for parts like C5416 with + /* C54xx defaults to max wait states, even for parts like C5416 with larger internal memory. Need to force the wait state register to zero */ #ifdef CONFIG_TI_C54X @@ -209,7 +209,7 @@ #endif outFile = "c:\\speextrunktest\\samples\\maleout5x.snd"; fout = fopen(outFile, "wb+"); - + speex_bits_init(&bits); #ifndef DECODE_ONLY while (!feof(fin)) @@ -222,7 +222,7 @@ speex_bits_reset(&bits); speex_encode_int(st, in_short, &bits); - nbChars = speex_bits_write(&bits, cbits, + nbChars = speex_bits_write(&bits, cbits, sizeof(cbits)*BYTES_PER_CHAR) /BYTES_PER_CHAR; bitCount+=bits.nbBits; @@ -260,7 +260,7 @@ rewind(fin); rewind(fout); - while ( FRAME_SIZE == fread(inout_byte, 2, FRAME_SIZE, fin)) + while ( FRAME_SIZE == fread(inout_byte, 2, FRAME_SIZE, fin)) { float s=0, e=0; diff -Nru speex-1.2~rc1.2/ti/testenc-TI-C64x.c speex-1.2.0/ti/testenc-TI-C64x.c --- speex-1.2~rc1.2/ti/testenc-TI-C64x.c 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/ti/testenc-TI-C64x.c 2015-07-06 15:01:57.000000000 +0000 @@ -1,5 +1,5 @@ /* Copyright (C) 2005 Psi Systems, Inc. - Author: Jean-Marc Valin + Author: Jean-Marc Valin File: testenc-TI-C64x.c Encoder/Decoder Loop Main file for TI TMS320C64xx processor for use with TI Code Composer (TM) DSP development tools. @@ -9,18 +9,18 @@ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - + - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - + - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - + - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR @@ -50,7 +50,7 @@ //#define TESTENC_BYTES_PER_FRAME 28 /* 11kbps */ //#define TESTENC_QUALITY 5 /* 11 kbps */ -/* For narrowband, QUALITY maps to these bit rates (see modes.c, manual.pdf) +/* For narrowband, QUALITY maps to these bit rates (see modes.c, manual.pdf) * {1, 8, 2, 3, 3, 4, 4, 5, 5, 6, 7} * 0 -> 2150 * 1 -> 3950 @@ -69,12 +69,12 @@ #endif #ifdef MANUAL_ALLOC -/* Take all Speex space from this private heap */ +/* Take all Speex space from this private heap */ /* This is useful for multichannel applications */ -#pragma DATA_SECTION(spxHeap, ".myheap"); +#pragma DATA_SECTION(spxHeap, ".myheap"); static char spxHeap[SPEEX_PERSIST_STACK_SIZE]; -#pragma DATA_SECTION(spxScratch, ".myheap"); +#pragma DATA_SECTION(spxScratch, ".myheap"); static char spxScratch[SPEEX_SCRATCH_STACK_SIZE]; char *spxGlobalHeapPtr, *spxGlobalHeapEnd; @@ -171,7 +171,7 @@ #endif outFile = "c:\\speextrunktest\\samples\\maleout6x.snd"; fout = fopen(outFile, "wb+"); - + speex_bits_init(&bits); #ifndef DECODE_ONLY while (!feof(fin)) @@ -200,7 +200,7 @@ // bitCount+=160; /* only correct for 8kbps, but just for the printf */ bitCount+=bits.nbBits; #endif - + speex_decode_int(dec, &bits, out_short); speex_bits_reset(&bits); @@ -214,11 +214,11 @@ speex_encoder_destroy(st); speex_decoder_destroy(dec); -#ifdef CHECK_RESULT +#ifdef CHECK_RESULT rewind(fin); rewind(fout); - while ( FRAME_SIZE == fread(in_short, sizeof(short), FRAME_SIZE, fin) + while ( FRAME_SIZE == fread(in_short, sizeof(short), FRAME_SIZE, fin) && FRAME_SIZE == fread(out_short, sizeof(short), FRAME_SIZE,fout) ) { diff -Nru speex-1.2~rc1.2/TODO speex-1.2.0/TODO --- speex-1.2~rc1.2/TODO 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/TODO 2015-07-06 15:02:09.000000000 +0000 @@ -1,10 +1,7 @@ For 1.2: Major points: -- Make documentation match the actual code (especially jitter buffer, AEC and preprocessor) -- Get AGC to work in fixed-point even if not totally converted +- Make documentation match the actual code - Stabilise all APIs (need feedback) -- Short-term estimate in jitter buffer -- Control delay in new AEC API. - NaN checks? - Better error reporting - Make kiss-fft 32-bit safe @@ -19,7 +16,6 @@ Merge TriMedia stuff packet dump Do VAD properly ---enable-{aec,preprocessor,jitter,resampler} Optimisations - Add restrict in a few places? @@ -32,12 +28,6 @@ Allocator override (speex_lib_ctl?) Fixed-point: - VBR - - Jitter buffer - - AGC -Denoiser: - - Better noise adaptation -AGC: - - Use median filtering instead of "non-linear mean"? Standards -Complete Speex RTP profile diff -Nru speex-1.2~rc1.2/win32/config.h speex-1.2.0/win32/config.h --- speex-1.2~rc1.2/win32/config.h 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/config.h 2015-07-06 15:02:14.000000000 +0000 @@ -1,6 +1,17 @@ // Microsoft version of 'inline' #define inline __inline +// In Visual Studio, _M_IX86_FP=1 means /arch:SSE was used, likewise +// _M_IX86_FP=2 means /arch:SSE2 was used. +// Also, enable both _USE_SSE and _USE_SSE2 if we're compiling for x86-64 +#if _M_IX86_FP >= 1 || defined(_M_X64) +#define _USE_SSE +#endif + +#if _M_IX86_FP >= 2 || defined(_M_X64) +#define _USE_SSE2 +#endif + // Visual Studio support alloca(), but it always align variables to 16-bit // boundary, while SSE need 128-bit alignment. So we disable alloca() when // SSE is enabled. diff -Nru speex-1.2~rc1.2/win32/libspeex/libspeexdsp.dsp speex-1.2.0/win32/libspeex/libspeexdsp.dsp --- speex-1.2~rc1.2/win32/libspeex/libspeexdsp.dsp 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/libspeex/libspeexdsp.dsp 1970-01-01 00:00:00.000000000 +0000 @@ -1,224 +0,0 @@ -# Microsoft Developer Studio Project File - Name="libspeexdsp" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** DO NOT EDIT ** - -# TARGTYPE "Win32 (x86) Static Library" 0x0104 - -CFG=libspeexdsp - Win32 Debug -!MESSAGE This is not a valid makefile. To build this project using NMAKE, -!MESSAGE use the Export Makefile command and run -!MESSAGE -!MESSAGE NMAKE /f "libspeexdsp.mak". -!MESSAGE -!MESSAGE You can specify a configuration when running NMAKE -!MESSAGE by defining the macro CFG on the command line. For example: -!MESSAGE -!MESSAGE NMAKE /f "libspeexdsp.mak" CFG="libspeexdsp - Win32 Debug" -!MESSAGE -!MESSAGE Possible choices for configuration are: -!MESSAGE -!MESSAGE "libspeexdsp - Win32 Release" (based on "Win32 (x86) Static Library") -!MESSAGE "libspeexdsp - Win32 Debug" (based on "Win32 (x86) Static Library") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -RSC=rc.exe - -!IF "$(CFG)" == "libspeexdsp - Win32 Release" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "Release" -# PROP BASE Intermediate_Dir "Release" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "Release" -# PROP Intermediate_Dir "Release" -# PROP Target_Dir "" -F90=df.exe -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c -# ADD CPP /nologo /MD /W1 /GX- /O2 /I "../../include" /I "../" /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /D "HAVE_CONFIG_H" /FD /c -# SUBTRACT CPP /YX -# ADD BASE RSC /l 0x419 /d "NDEBUG" -# ADD RSC /l 0x809 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LIB32=link.exe -lib -# ADD BASE LIB32 /nologo -# ADD LIB32 /nologo /out:"..\..\lib\libspeexdsp.lib" - -!ELSEIF "$(CFG)" == "libspeexdsp - Win32 Debug" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "libspeexdsp___Win32_Debug" -# PROP BASE Intermediate_Dir "libspeexdsp___Win32_Debug" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "libspeexdsp___Win32_Debug" -# PROP Intermediate_Dir "libspeexdsp___Win32_Debug" -# PROP Target_Dir "" -F90=df.exe -# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c -# ADD CPP /nologo /MDd /W3 /Gm- /GX- /Zi /Od /I "../../include" /I "../" /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /D "HAVE_CONFIG_H" /FD /GZ /c -# SUBTRACT CPP /YX -# ADD BASE RSC /l 0x419 /d "_DEBUG" -# ADD RSC /l 0x809 /d "_DEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LIB32=link.exe -lib -# ADD BASE LIB32 /nologo -# ADD LIB32 /nologo /out:"..\..\lib\libspeexdsp.lib" - -!ENDIF - -# Begin Target - -# Name "libspeexdsp - Win32 Release" -# Name "libspeexdsp - Win32 Debug" -# Begin Group "Source Files" - -# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat" -# Begin Source File - -SOURCE=..\..\libspeex\buffer.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\fftwrap.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\filterbank.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\jitter.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\kiss_fft.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\kiss_fftr.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\mdf.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\preprocess.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\resample.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\smallft.c -# End Source File -# End Group -# Begin Group "Header Files" - -# PROP Default_Filter "h;hpp;hxx;hm;inl" -# Begin Source File - -SOURCE=..\..\libspeex\_kiss_fft_guts.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\arch.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\fftwrap.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\filterbank.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\fixed_debug.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\fixed_generic.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\kiss_fft.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\kiss_fftr.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\math_approx.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\os_support.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\pseudofloat.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\smallft.h -# End Source File -# End Group -# Begin Group "Public Header Files" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=..\..\include\speex\speex.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_bits.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_buffer.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_echo.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_jitter.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_preprocess.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_resampler.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_types.h -# End Source File -# End Group -# Begin Source File - -SOURCE=..\config.h -# End Source File -# End Target -# End Project diff -Nru speex-1.2~rc1.2/win32/libspeex/libspeexdsp_dynamic.dsp speex-1.2.0/win32/libspeex/libspeexdsp_dynamic.dsp --- speex-1.2~rc1.2/win32/libspeex/libspeexdsp_dynamic.dsp 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/libspeex/libspeexdsp_dynamic.dsp 1970-01-01 00:00:00.000000000 +0000 @@ -1,233 +0,0 @@ -# Microsoft Developer Studio Project File - Name="libspeexdsp_dynamic" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** DO NOT EDIT ** - -# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102 - -CFG=libspeexdsp_dynamic - Win32 Debug -!MESSAGE This is not a valid makefile. To build this project using NMAKE, -!MESSAGE use the Export Makefile command and run -!MESSAGE -!MESSAGE NMAKE /f "libspeexdsp_dynamic.mak". -!MESSAGE -!MESSAGE You can specify a configuration when running NMAKE -!MESSAGE by defining the macro CFG on the command line. For example: -!MESSAGE -!MESSAGE NMAKE /f "libspeexdsp_dynamic.mak" CFG="libspeexdsp_dynamic - Win32 Debug" -!MESSAGE -!MESSAGE Possible choices for configuration are: -!MESSAGE -!MESSAGE "libspeexdsp_dynamic - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library") -!MESSAGE "libspeexdsp_dynamic - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -MTL=midl.exe -RSC=rc.exe - -!IF "$(CFG)" == "libspeexdsp_dynamic - Win32 Release" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "libspeexdsp_dynamic___Win32_Release" -# PROP BASE Intermediate_Dir "libspeexdsp_dynamic___Win32_Release" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "Release" -# PROP Intermediate_Dir "Dynamic_Release" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "LIBSPEEX_DYNAMIC_EXPORTS" /YX /FD /c -# ADD CPP /nologo /MD /W3 /GX /O2 /I "../../include" /I "../" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "HAVE_CONFIG_H" /FD /c -# SUBTRACT CPP /YX -# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32 -# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32 -# ADD BASE RSC /l 0x409 /d "NDEBUG" -# ADD RSC /l 0x409 /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386 -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386 /out:"..\..\bin\libspeexdsp.dll" /implib:"..\..\lib\libspeexdsp.lib" - -!ELSEIF "$(CFG)" == "libspeexdsp_dynamic - Win32 Debug" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "libspeexdsp_dynamic___Win32_Debug" -# PROP BASE Intermediate_Dir "libspeexdsp_dynamic___Win32_Debug" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "Debug" -# PROP Intermediate_Dir "Dynamic_Debug" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "LIBSPEEX_DYNAMIC_EXPORTS" /YX /FD /GZ /c -# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "../../include" /I "../" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "HAVE_CONFIG_H" /FD /GZ /c -# SUBTRACT CPP /YX -# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32 -# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32 -# ADD BASE RSC /l 0x409 /d "_DEBUG" -# ADD RSC /l 0x409 /d "_DEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /out:"..\..\bin\libspeexdsp.dll" /implib:"..\..\lib\libspeexdsp.lib" /pdbtype:sept - -!ENDIF - -# Begin Target - -# Name "libspeexdsp_dynamic - Win32 Release" -# Name "libspeexdsp_dynamic - Win32 Debug" -# Begin Group "Source Files" - -# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat" -# Begin Source File - -SOURCE=..\..\libspeex\buffer.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\fftwrap.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\filterbank.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\jitter.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\kiss_fft.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\kiss_fftr.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\mdf.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\preprocess.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\resample.c -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\smallft.c -# End Source File -# End Group -# Begin Group "Header Files" - -# PROP Default_Filter "h;hpp;hxx;hm;inl" -# Begin Source File - -SOURCE=..\..\libspeex\_kiss_fft_guts.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\arch.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\fftwrap.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\filterbank.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\fixed_debug.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\fixed_generic.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\kiss_fft.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\kiss_fftr.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\math_approx.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\os_support.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\pseudofloat.h -# End Source File -# Begin Source File - -SOURCE=..\..\libspeex\smallft.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_buffer.h -# End Source File -# End Group -# Begin Group "Public Header Files" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=..\..\include\speex\speex.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_bits.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_echo.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_jitter.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_preprocess.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_resampler.h -# End Source File -# Begin Source File - -SOURCE=..\..\include\speex\speex_types.h -# End Source File -# End Group -# Begin Source File - -SOURCE=..\config.h -# End Source File -# Begin Source File - -SOURCE=..\libspeexdsp.def -# End Source File -# End Target -# End Project diff -Nru speex-1.2~rc1.2/win32/libspeex/Makefile.am speex-1.2.0/win32/libspeex/Makefile.am --- speex-1.2~rc1.2/win32/libspeex/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/libspeex/Makefile.am 2015-07-06 15:02:14.000000000 +0000 @@ -3,4 +3,4 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies -EXTRA_DIST = libspeex.dsw libspeex.dsp libspeex_dynamic.dsp libspeexdsp.dsp libspeexdsp_dynamic.dsp +EXTRA_DIST = libspeex.dsw libspeex.dsp libspeex_dynamic.dsp diff -Nru speex-1.2~rc1.2/win32/libspeex/Makefile.in speex-1.2.0/win32/libspeex/Makefile.in --- speex-1.2~rc1.2/win32/libspeex/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/libspeex/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/libspeex -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,16 +256,16 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -EXTRA_DIST = libspeex.dsw libspeex.dsp libspeex_dynamic.dsp libspeexdsp.dsp libspeexdsp_dynamic.dsp +EXTRA_DIST = libspeex.dsw libspeex.dsp libspeex_dynamic.dsp all: all-am .SUFFIXES: @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/libspeex/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/libspeex/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/libspeex/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/libspeex/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/libspeexdsp.def speex-1.2.0/win32/libspeexdsp.def --- speex-1.2~rc1.2/win32/libspeexdsp.def 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/libspeexdsp.def 1970-01-01 00:00:00.000000000 +0000 @@ -1,72 +0,0 @@ -LIBRARY libspeexdsp -EXPORTS - - -; -; speex_buffer.h -; -speex_buffer_init -speex_buffer_destroy -speex_buffer_write -speex_buffer_writezeros -speex_buffer_read -speex_buffer_get_available -speex_buffer_resize - -; -; speex_echo.h -; -speex_echo_state_init -speex_echo_state_destroy -speex_echo_cancellation -speex_echo_cancel -speex_echo_capture -speex_echo_playback -speex_echo_state_reset -speex_echo_ctl - -; -; speex_jitter.h -; -jitter_buffer_init -jitter_buffer_reset -jitter_buffer_destroy -jitter_buffer_put -jitter_buffer_get -jitter_buffer_get_pointer_timestamp -jitter_buffer_tick -jitter_buffer_update_delay - -; -; speex_preprocess.h -; -speex_preprocess_state_init -speex_preprocess_state_destroy -speex_preprocess_run -speex_preprocess -speex_preprocess_estimate_update -speex_preprocess_ctl - -; -; speex_resampler.h -; -speex_resampler_init -speex_resampler_init_frac -speex_resampler_destroy -speex_resampler_process_float -speex_resampler_process_int -speex_resampler_process_interleaved_float -speex_resampler_process_interleaved_int -speex_resampler_set_rate -speex_resampler_get_rate -speex_resampler_set_rate_frac -speex_resampler_get_ratio -speex_resampler_set_quality -speex_resampler_get_quality -speex_resampler_set_input_stride -speex_resampler_get_input_stride -speex_resampler_set_output_stride -speex_resampler_get_output_stride -speex_resampler_skip_zeros -speex_resampler_reset_mem -speex_resampler_strerror diff -Nru speex-1.2~rc1.2/win32/Makefile.am speex-1.2.0/win32/Makefile.am --- speex-1.2~rc1.2/win32/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/Makefile.am 2015-07-06 15:02:14.000000000 +0000 @@ -5,4 +5,4 @@ SUBDIRS = libspeex speexenc speexdec VS2003 VS2005 VS2008 -EXTRA_DIST = speex.iss config.h libspeex.def libspeexdsp.def +EXTRA_DIST = speex.iss config.h libspeex.def diff -Nru speex-1.2~rc1.2/win32/Makefile.in speex-1.2.0/win32/Makefile.in --- speex-1.2~rc1.2/win32/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32 -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -146,6 +159,7 @@ ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -202,6 +216,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -209,12 +224,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -244,12 +261,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -294,9 +316,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -304,7 +326,7 @@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = libspeex speexenc speexdec VS2003 VS2005 VS2008 -EXTRA_DIST = speex.iss config.h libspeex.def libspeexdsp.def +EXTRA_DIST = speex.iss config.h libspeex.def all: all-recursive .SUFFIXES: @@ -317,10 +339,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -615,6 +636,8 @@ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/speexdec/Makefile.in speex-1.2.0/win32/speexdec/Makefile.in --- speex-1.2~rc1.2/win32/speexdec/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/speexdec/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/speexdec -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/speexdec/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/speexdec/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/speexdec/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/speexdec/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/speexenc/Makefile.in speex-1.2.0/win32/speexenc/Makefile.in --- speex-1.2~rc1.2/win32/speexenc/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/speexenc/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/speexenc -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/speexenc/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/speexenc/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/speexenc/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/speexenc/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/speex.iss speex-1.2.0/win32/speex.iss --- speex-1.2~rc1.2/win32/speex.iss 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/speex.iss 2015-07-06 15:02:14.000000000 +0000 @@ -36,10 +36,7 @@ Source: "..\include\speex\speex.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion Source: "..\include\speex\speex_bits.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion Source: "..\include\speex\speex_callbacks.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion -Source: "..\include\speex\speex_echo.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion Source: "..\include\speex\speex_header.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion -Source: "..\include\speex\speex_jitter.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion -Source: "..\include\speex\speex_preprocess.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion Source: "..\include\speex\speex_stereo.h"; DestDir: "{app}\libspeex\include"; Flags: ignoreversion Source: "..\doc\manual.pdf"; DestDir: "{app}\doc"; Flags: ignoreversion diff -Nru speex-1.2~rc1.2/win32/VS2003/libspeex/Makefile.in speex-1.2.0/win32/VS2003/libspeex/Makefile.in --- speex-1.2~rc1.2/win32/VS2003/libspeex/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/libspeex/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2003/libspeex -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2003/libspeex/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2003/libspeex/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2003/libspeex/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2003/libspeex/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2003/libspeexdsp/libspeexdsp.vcproj speex-1.2.0/win32/VS2003/libspeexdsp/libspeexdsp.vcproj --- speex-1.2~rc1.2/win32/VS2003/libspeexdsp/libspeexdsp.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/libspeexdsp/libspeexdsp.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,342 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2003/libspeexdsp/Makefile.am speex-1.2.0/win32/VS2003/libspeexdsp/Makefile.am --- speex-1.2~rc1.2/win32/VS2003/libspeexdsp/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/libspeexdsp/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,8 +0,0 @@ -## Process this file with automake to produce Makefile.in. -*-Makefile-*- - -# Disable automatic dependency tracking if using other tools than gcc and gmake -#AUTOMAKE_OPTIONS = no-dependencies - -EXTRA_DIST = libspeexdsp.vcproj - - diff -Nru speex-1.2~rc1.2/win32/VS2003/libspeexdsp/Makefile.in speex-1.2.0/win32/VS2003/libspeexdsp/Makefile.in --- speex-1.2~rc1.2/win32/VS2003/libspeexdsp/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/libspeexdsp/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,440 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Disable automatic dependency tracking if using other tools than gcc and gmake -#AUTOMAKE_OPTIONS = no-dependencies -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = win32/VS2003/libspeexdsp -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FFT_CFLAGS = @FFT_CFLAGS@ -FFT_LIBS = @FFT_LIBS@ -FFT_PKGCONFIG = @FFT_PKGCONFIG@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OGG_CFLAGS = @OGG_CFLAGS@ -OGG_LIBS = @OGG_LIBS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SIZE16 = @SIZE16@ -SIZE32 = @SIZE32@ -SPEEX_LT_AGE = @SPEEX_LT_AGE@ -SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ -SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ -SPEEX_VERSION = @SPEEX_VERSION@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -src = @src@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -EXTRA_DIST = libspeexdsp.vcproj -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2003/libspeexdsp/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2003/libspeexdsp/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru speex-1.2~rc1.2/win32/VS2003/Makefile.am speex-1.2.0/win32/VS2003/Makefile.am --- speex-1.2~rc1.2/win32/VS2003/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/Makefile.am 2015-07-06 15:02:14.000000000 +0000 @@ -3,6 +3,6 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies -SUBDIRS = libspeex libspeexdsp speexenc speexdec tests +SUBDIRS = libspeex speexenc speexdec tests EXTRA_DIST = libspeex.sln diff -Nru speex-1.2~rc1.2/win32/VS2003/Makefile.in speex-1.2.0/win32/VS2003/Makefile.in --- speex-1.2~rc1.2/win32/VS2003/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2003 -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -146,6 +159,7 @@ ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -202,6 +216,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -209,12 +224,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -244,12 +261,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -294,16 +316,16 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -SUBDIRS = libspeex libspeexdsp speexenc speexdec tests +SUBDIRS = libspeex speexenc speexdec tests EXTRA_DIST = libspeex.sln all: all-recursive @@ -317,10 +339,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2003/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2003/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2003/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2003/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -615,6 +636,8 @@ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2003/speexdec/Makefile.in speex-1.2.0/win32/VS2003/speexdec/Makefile.in --- speex-1.2~rc1.2/win32/VS2003/speexdec/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/speexdec/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2003/speexdec -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2003/speexdec/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2003/speexdec/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2003/speexdec/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2003/speexdec/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2003/speexenc/Makefile.in speex-1.2.0/win32/VS2003/speexenc/Makefile.in --- speex-1.2~rc1.2/win32/VS2003/speexenc/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/speexenc/Makefile.in 2016-12-07 23:21:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2003/speexenc -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2003/speexenc/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2003/speexenc/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2003/speexenc/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2003/speexenc/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2003/tests/Makefile.am speex-1.2.0/win32/VS2003/tests/Makefile.am --- speex-1.2~rc1.2/win32/VS2003/tests/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/tests/Makefile.am 2015-07-06 15:02:14.000000000 +0000 @@ -3,7 +3,6 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies -EXTRA_DIST = testdenoise.vcproj testecho.vcproj testenc.vcproj testenc_uwb.vcproj \ - testenc_wb.vcproj testresample.vcproj +EXTRA_DIST = testenc.vcproj testenc_uwb.vcproj testenc_wb.vcproj diff -Nru speex-1.2~rc1.2/win32/VS2003/tests/Makefile.in speex-1.2.0/win32/VS2003/tests/Makefile.in --- speex-1.2~rc1.2/win32/VS2003/tests/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/tests/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2003/tests -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,18 +256,16 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -EXTRA_DIST = testdenoise.vcproj testecho.vcproj testenc.vcproj testenc_uwb.vcproj \ - testenc_wb.vcproj testresample.vcproj - +EXTRA_DIST = testenc.vcproj testenc_uwb.vcproj testenc_wb.vcproj all: all-am .SUFFIXES: @@ -258,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2003/tests/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2003/tests/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2003/tests/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2003/tests/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -436,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2003/tests/testdenoise.vcproj speex-1.2.0/win32/VS2003/tests/testdenoise.vcproj --- speex-1.2~rc1.2/win32/VS2003/tests/testdenoise.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/tests/testdenoise.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,213 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2003/tests/testecho.vcproj speex-1.2.0/win32/VS2003/tests/testecho.vcproj --- speex-1.2~rc1.2/win32/VS2003/tests/testecho.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/tests/testecho.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,213 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2003/tests/testresample.vcproj speex-1.2.0/win32/VS2003/tests/testresample.vcproj --- speex-1.2~rc1.2/win32/VS2003/tests/testresample.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2003/tests/testresample.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,213 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2005/libspeex/Makefile.in speex-1.2.0/win32/VS2005/libspeex/Makefile.in --- speex-1.2~rc1.2/win32/VS2005/libspeex/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/libspeex/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2005/libspeex -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2005/libspeex/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2005/libspeex/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2005/libspeex/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2005/libspeex/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2005/libspeexdsp/libspeexdsp.vcproj speex-1.2.0/win32/VS2005/libspeexdsp/libspeexdsp.vcproj --- speex-1.2~rc1.2/win32/VS2005/libspeexdsp/libspeexdsp.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/libspeexdsp/libspeexdsp.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,1624 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2005/libspeexdsp/Makefile.am speex-1.2.0/win32/VS2005/libspeexdsp/Makefile.am --- speex-1.2~rc1.2/win32/VS2005/libspeexdsp/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/libspeexdsp/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,8 +0,0 @@ -## Process this file with automake to produce Makefile.in. -*-Makefile-*- - -# Disable automatic dependency tracking if using other tools than gcc and gmake -#AUTOMAKE_OPTIONS = no-dependencies - -EXTRA_DIST = libspeexdsp.vcproj - - diff -Nru speex-1.2~rc1.2/win32/VS2005/libspeexdsp/Makefile.in speex-1.2.0/win32/VS2005/libspeexdsp/Makefile.in --- speex-1.2~rc1.2/win32/VS2005/libspeexdsp/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/libspeexdsp/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,440 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Disable automatic dependency tracking if using other tools than gcc and gmake -#AUTOMAKE_OPTIONS = no-dependencies -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = win32/VS2005/libspeexdsp -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FFT_CFLAGS = @FFT_CFLAGS@ -FFT_LIBS = @FFT_LIBS@ -FFT_PKGCONFIG = @FFT_PKGCONFIG@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OGG_CFLAGS = @OGG_CFLAGS@ -OGG_LIBS = @OGG_LIBS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SIZE16 = @SIZE16@ -SIZE32 = @SIZE32@ -SPEEX_LT_AGE = @SPEEX_LT_AGE@ -SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ -SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ -SPEEX_VERSION = @SPEEX_VERSION@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -src = @src@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -EXTRA_DIST = libspeexdsp.vcproj -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2005/libspeexdsp/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2005/libspeexdsp/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru speex-1.2~rc1.2/win32/VS2005/Makefile.am speex-1.2.0/win32/VS2005/Makefile.am --- speex-1.2~rc1.2/win32/VS2005/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/Makefile.am 2015-07-06 15:02:15.000000000 +0000 @@ -3,6 +3,6 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies -SUBDIRS = libspeex libspeexdsp speexenc speexdec tests +SUBDIRS = libspeex speexenc speexdec tests EXTRA_DIST = libspeex.sln diff -Nru speex-1.2~rc1.2/win32/VS2005/Makefile.in speex-1.2.0/win32/VS2005/Makefile.in --- speex-1.2~rc1.2/win32/VS2005/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2005 -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -146,6 +159,7 @@ ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -202,6 +216,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -209,12 +224,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -244,12 +261,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -294,16 +316,16 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -SUBDIRS = libspeex libspeexdsp speexenc speexdec tests +SUBDIRS = libspeex speexenc speexdec tests EXTRA_DIST = libspeex.sln all: all-recursive @@ -317,10 +339,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2005/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2005/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2005/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2005/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -615,6 +636,8 @@ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2005/speexdec/Makefile.in speex-1.2.0/win32/VS2005/speexdec/Makefile.in --- speex-1.2~rc1.2/win32/VS2005/speexdec/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/speexdec/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2005/speexdec -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2005/speexdec/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2005/speexdec/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2005/speexdec/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2005/speexdec/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2005/speexenc/Makefile.in speex-1.2.0/win32/VS2005/speexenc/Makefile.in --- speex-1.2~rc1.2/win32/VS2005/speexenc/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/speexenc/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2005/speexenc -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2005/speexenc/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2005/speexenc/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2005/speexenc/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2005/speexenc/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2005/tests/Makefile.am speex-1.2.0/win32/VS2005/tests/Makefile.am --- speex-1.2~rc1.2/win32/VS2005/tests/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/tests/Makefile.am 2015-07-06 15:02:14.000000000 +0000 @@ -3,7 +3,6 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies -EXTRA_DIST = testdenoise.vcproj testecho.vcproj testenc.vcproj testenc_uwb.vcproj \ - testenc_wb.vcproj testresample.vcproj +EXTRA_DIST = testenc.vcproj testenc_uwb.vcproj testenc_wb.vcproj diff -Nru speex-1.2~rc1.2/win32/VS2005/tests/Makefile.in speex-1.2.0/win32/VS2005/tests/Makefile.in --- speex-1.2~rc1.2/win32/VS2005/tests/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/tests/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2005/tests -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,18 +256,16 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -EXTRA_DIST = testdenoise.vcproj testecho.vcproj testenc.vcproj testenc_uwb.vcproj \ - testenc_wb.vcproj testresample.vcproj - +EXTRA_DIST = testenc.vcproj testenc_uwb.vcproj testenc_wb.vcproj all: all-am .SUFFIXES: @@ -258,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2005/tests/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2005/tests/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2005/tests/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2005/tests/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -436,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2005/tests/testdenoise.vcproj speex-1.2.0/win32/VS2005/tests/testdenoise.vcproj --- speex-1.2~rc1.2/win32/VS2005/tests/testdenoise.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/tests/testdenoise.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,307 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2005/tests/testecho.vcproj speex-1.2.0/win32/VS2005/tests/testecho.vcproj --- speex-1.2~rc1.2/win32/VS2005/tests/testecho.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/tests/testecho.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,307 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2005/tests/testresample.vcproj speex-1.2.0/win32/VS2005/tests/testresample.vcproj --- speex-1.2~rc1.2/win32/VS2005/tests/testresample.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2005/tests/testresample.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,307 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2008/libspeex/libspeex.vcproj speex-1.2.0/win32/VS2008/libspeex/libspeex.vcproj --- speex-1.2~rc1.2/win32/VS2008/libspeex/libspeex.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/libspeex/libspeex.vcproj 2015-07-06 15:02:13.000000000 +0000 @@ -1438,10 +1438,6 @@ > - - @@ -1466,10 +1462,6 @@ > - - @@ -1498,10 +1490,6 @@ > - - @@ -1514,10 +1502,6 @@ > - - @@ -1648,26 +1632,14 @@ > - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2008/libspeex/Makefile.in speex-1.2.0/win32/VS2008/libspeex/Makefile.in --- speex-1.2~rc1.2/win32/VS2008/libspeex/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/libspeex/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2008/libspeex -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2008/libspeex/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2008/libspeex/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2008/libspeex/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2008/libspeex/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2008/libspeexdsp/libspeexdsp.vcproj speex-1.2.0/win32/VS2008/libspeexdsp/libspeexdsp.vcproj --- speex-1.2~rc1.2/win32/VS2008/libspeexdsp/libspeexdsp.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/libspeexdsp/libspeexdsp.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,470 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2008/libspeexdsp/Makefile.am speex-1.2.0/win32/VS2008/libspeexdsp/Makefile.am --- speex-1.2~rc1.2/win32/VS2008/libspeexdsp/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/libspeexdsp/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,8 +0,0 @@ -## Process this file with automake to produce Makefile.in. -*-Makefile-*- - -# Disable automatic dependency tracking if using other tools than gcc and gmake -#AUTOMAKE_OPTIONS = no-dependencies - -EXTRA_DIST = libspeexdsp.vcproj - - diff -Nru speex-1.2~rc1.2/win32/VS2008/libspeexdsp/Makefile.in speex-1.2.0/win32/VS2008/libspeexdsp/Makefile.in --- speex-1.2~rc1.2/win32/VS2008/libspeexdsp/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/libspeexdsp/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,440 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Disable automatic dependency tracking if using other tools than gcc and gmake -#AUTOMAKE_OPTIONS = no-dependencies -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = win32/VS2008/libspeexdsp -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FFT_CFLAGS = @FFT_CFLAGS@ -FFT_LIBS = @FFT_LIBS@ -FFT_PKGCONFIG = @FFT_PKGCONFIG@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OGG_CFLAGS = @OGG_CFLAGS@ -OGG_LIBS = @OGG_LIBS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SIZE16 = @SIZE16@ -SIZE32 = @SIZE32@ -SPEEX_LT_AGE = @SPEEX_LT_AGE@ -SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ -SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ -SPEEX_VERSION = @SPEEX_VERSION@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -src = @src@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -EXTRA_DIST = libspeexdsp.vcproj -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2008/libspeexdsp/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2008/libspeexdsp/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags-am uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru speex-1.2~rc1.2/win32/VS2008/Makefile.am speex-1.2.0/win32/VS2008/Makefile.am --- speex-1.2~rc1.2/win32/VS2008/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/Makefile.am 2015-07-06 15:02:14.000000000 +0000 @@ -3,6 +3,6 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies -SUBDIRS = libspeex libspeexdsp speexenc speexdec tests +SUBDIRS = libspeex speexenc speexdec tests EXTRA_DIST = libspeex.sln diff -Nru speex-1.2~rc1.2/win32/VS2008/Makefile.in speex-1.2.0/win32/VS2008/Makefile.in --- speex-1.2~rc1.2/win32/VS2008/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2008 -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -146,6 +159,7 @@ ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -202,6 +216,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -209,12 +224,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -244,12 +261,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -294,16 +316,16 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -SUBDIRS = libspeex libspeexdsp speexenc speexdec tests +SUBDIRS = libspeex speexenc speexdec tests EXTRA_DIST = libspeex.sln all: all-recursive @@ -317,10 +339,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2008/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2008/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2008/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2008/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -615,6 +636,8 @@ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2008/speexdec/Makefile.in speex-1.2.0/win32/VS2008/speexdec/Makefile.in --- speex-1.2~rc1.2/win32/VS2008/speexdec/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/speexdec/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2008/speexdec -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2008/speexdec/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2008/speexdec/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2008/speexdec/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2008/speexdec/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2008/speexenc/Makefile.in speex-1.2.0/win32/VS2008/speexenc/Makefile.in --- speex-1.2~rc1.2/win32/VS2008/speexenc/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/speexenc/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2008/speexenc -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,9 +256,9 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @@ -256,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2008/speexenc/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2008/speexenc/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2008/speexenc/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2008/speexenc/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -434,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2008/tests/Makefile.am speex-1.2.0/win32/VS2008/tests/Makefile.am --- speex-1.2~rc1.2/win32/VS2008/tests/Makefile.am 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/tests/Makefile.am 2015-07-06 15:02:13.000000000 +0000 @@ -3,7 +3,6 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies -EXTRA_DIST = testdenoise.vcproj testecho.vcproj testenc.vcproj testenc_uwb.vcproj \ - testenc_wb.vcproj testresample.vcproj +EXTRA_DIST = testenc.vcproj testenc_uwb.vcproj testenc_wb.vcproj diff -Nru speex-1.2~rc1.2/win32/VS2008/tests/Makefile.in speex-1.2.0/win32/VS2008/tests/Makefile.in --- speex-1.2~rc1.2/win32/VS2008/tests/Makefile.in 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/tests/Makefile.in 2016-12-07 23:21:04.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile.in generated by automake 1.15 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. +# Copyright (C) 1994-2014 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -17,7 +17,17 @@ # Disable automatic dependency tracking if using other tools than gcc and gmake #AUTOMAKE_OPTIONS = no-dependencies VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ @@ -81,12 +91,15 @@ build_triplet = @build@ host_triplet = @host@ subdir = win32/VS2008/tests -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ +am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = @@ -111,6 +124,7 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -142,6 +156,7 @@ FFT_PKGCONFIG = @FFT_PKGCONFIG@ FGREP = @FGREP@ GREP = @GREP@ +INCLUDE_STDINT = @INCLUDE_STDINT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ @@ -149,12 +164,14 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ @@ -184,12 +201,17 @@ SHELL = @SHELL@ SIZE16 = @SIZE16@ SIZE32 = @SIZE32@ +SPEEXDSP_CFLAGS = @SPEEXDSP_CFLAGS@ +SPEEXDSP_LIBS = @SPEEXDSP_LIBS@ SPEEX_LT_AGE = @SPEEX_LT_AGE@ SPEEX_LT_CURRENT = @SPEEX_LT_CURRENT@ SPEEX_LT_REVISION = @SPEEX_LT_REVISION@ SPEEX_VERSION = @SPEEX_VERSION@ STRIP = @STRIP@ +USIZE16 = @USIZE16@ +USIZE32 = @USIZE32@ VERSION = @VERSION@ +WINMM_LIBS = @WINMM_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ @@ -234,18 +256,16 @@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ -src = @src@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -EXTRA_DIST = testdenoise.vcproj testecho.vcproj testenc.vcproj testenc_uwb.vcproj \ - testenc_wb.vcproj testresample.vcproj - +EXTRA_DIST = testenc.vcproj testenc_uwb.vcproj testenc_wb.vcproj all: all-am .SUFFIXES: @@ -258,10 +278,9 @@ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu win32/VS2008/tests/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign win32/VS2008/tests/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu win32/VS2008/tests/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --foreign win32/VS2008/tests/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -436,6 +455,8 @@ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am +.PRECIOUS: Makefile + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru speex-1.2~rc1.2/win32/VS2008/tests/testdenoise.vcproj speex-1.2.0/win32/VS2008/tests/testdenoise.vcproj --- speex-1.2~rc1.2/win32/VS2008/tests/testdenoise.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/tests/testdenoise.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,305 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2008/tests/testecho.vcproj speex-1.2.0/win32/VS2008/tests/testecho.vcproj --- speex-1.2~rc1.2/win32/VS2008/tests/testecho.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/tests/testecho.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,305 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff -Nru speex-1.2~rc1.2/win32/VS2008/tests/testresample.vcproj speex-1.2.0/win32/VS2008/tests/testresample.vcproj --- speex-1.2~rc1.2/win32/VS2008/tests/testresample.vcproj 2014-08-26 10:35:22.000000000 +0000 +++ speex-1.2.0/win32/VS2008/tests/testresample.vcproj 1970-01-01 00:00:00.000000000 +0000 @@ -1,305 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -