diff -Nru tilda-1.5.2/ABOUT-NLS tilda-1.5.4/ABOUT-NLS --- tilda-1.5.2/ABOUT-NLS 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/ABOUT-NLS 1970-01-01 00:00:00.000000000 +0000 @@ -1,1282 +0,0 @@ -1 Notes on the Free Translation Project -*************************************** - -Free software is going international! The Free Translation Project is -a way to get maintainers of free software, translators, and users all -together, so that free software will gradually become able to speak many -languages. A few packages already provide translations for their -messages. - - If you found this `ABOUT-NLS' file inside a distribution, you may -assume that the distributed package does use GNU `gettext' internally, -itself available at your nearest GNU archive site. But you do _not_ -need to install GNU `gettext' prior to configuring, installing or using -this package with messages translated. - - Installers will find here some useful hints. These notes also -explain how users should proceed for getting the programs to use the -available translations. They tell how people wanting to contribute and -work on translations can contact the appropriate team. - -1.1 INSTALL Matters -=================== - -Some packages are "localizable" when properly installed; the programs -they contain can be made to speak your own native language. Most such -packages use GNU `gettext'. Other packages have their own ways to -internationalization, predating GNU `gettext'. - - By default, this package will be installed to allow translation of -messages. It will automatically detect whether the system already -provides the GNU `gettext' functions. Installers may use special -options at configuration time for changing the default behaviour. The -command: - - ./configure --disable-nls - -will _totally_ disable translation of messages. - - When you already have GNU `gettext' installed on your system and run -configure without an option for your new package, `configure' will -probably detect the previously built and installed `libintl' library -and will decide to use it. If not, you may have to to use the -`--with-libintl-prefix' option to tell `configure' where to look for it. - - Internationalized packages usually have many `po/LL.po' files, where -LL gives an ISO 639 two-letter code identifying the language. Unless -translations have been forbidden at `configure' time by using the -`--disable-nls' switch, all available translations are installed -together with the package. However, the environment variable `LINGUAS' -may be set, prior to configuration, to limit the installed set. -`LINGUAS' should then contain a space separated list of two-letter -codes, stating which languages are allowed. - -1.2 Using This Package -====================== - -As a user, if your language has been installed for this package, you -only have to set the `LANG' environment variable to the appropriate -`LL_CC' combination. If you happen to have the `LC_ALL' or some other -`LC_xxx' environment variables set, you should unset them before -setting `LANG', otherwise the setting of `LANG' will not have the -desired effect. Here `LL' is an ISO 639 two-letter language code, and -`CC' is an ISO 3166 two-letter country code. For example, let's -suppose that you speak German and live in Germany. At the shell -prompt, merely execute `setenv LANG de_DE' (in `csh'), -`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). -This can be done from your `.login' or `.profile' file, once and for -all. - - You might think that the country code specification is redundant. -But in fact, some languages have dialects in different countries. For -example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The -country code serves to distinguish the dialects. - - The locale naming convention of `LL_CC', with `LL' denoting the -language and `CC' denoting the country, is the one use on systems based -on GNU libc. On other systems, some variations of this scheme are -used, such as `LL' or `LL_CC.ENCODING'. You can get the list of -locales supported by your system for your language by running the -command `locale -a | grep '^LL''. - - Not all programs have translations for all languages. By default, an -English message is shown in place of a nonexistent translation. If you -understand other languages, you can set up a priority list of languages. -This is done through a different environment variable, called -`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' -for the purpose of message handling, but you still need to have `LANG' -set to the primary language; this is required by other parts of the -system libraries. For example, some Swedish users who would rather -read translations in German than English for when Swedish is not -available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. - - Special advice for Norwegian users: The language code for Norwegian -bokma*l changed from `no' to `nb' recently (in 2003). During the -transition period, while some message catalogs for this language are -installed under `nb' and some older ones under `no', it's recommended -for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and -older translations are used. - - In the `LANGUAGE' environment variable, but not in the `LANG' -environment variable, `LL_CC' combinations can be abbreviated as `LL' -to denote the language's main dialect. For example, `de' is equivalent -to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' -(Portuguese as spoken in Portugal) in this context. - -1.3 Translating Teams -===================== - -For the Free Translation Project to be a success, we need interested -people who like their own language and write it well, and who are also -able to synergize with other translators speaking the same language. -Each translation team has its own mailing list. The up-to-date list of -teams can be found at the Free Translation Project's homepage, -`http://translationproject.org/', in the "Teams" area. - - If you'd like to volunteer to _work_ at translating messages, you -should become a member of the translating team for your own language. -The subscribing address is _not_ the same as the list itself, it has -`-request' appended. For example, speakers of Swedish can send a -message to `sv-request@li.org', having this message body: - - subscribe - - Keep in mind that team members are expected to participate -_actively_ in translations, or at solving translational difficulties, -rather than merely lurking around. If your team does not exist yet and -you want to start one, or if you are unsure about what to do or how to -get started, please write to `coordinator@translationproject.org' to -reach the coordinator for all translator teams. - - The English team is special. It works at improving and uniformizing -the terminology in use. Proven linguistic skills are praised more than -programming skills, here. - -1.4 Available Packages -====================== - -Languages are not equally supported in all packages. The following -matrix shows the current state of internationalization, as of June -2010. The matrix shows, in regard of each package, for which languages -PO files have been submitted to translation coordination, with a -translation percentage of at least 50%. - - Ready PO files af am an ar as ast az be be@latin bg bn_IN bs ca - +--------------------------------------------------+ - a2ps | [] [] | - aegis | | - ant-phone | | - anubis | | - aspell | [] [] | - bash | | - bfd | | - bibshelf | [] | - binutils | | - bison | | - bison-runtime | [] | - bluez-pin | [] [] | - bombono-dvd | | - buzztard | | - cflow | | - clisp | | - coreutils | [] [] | - cpio | | - cppi | | - cpplib | [] | - cryptsetup | | - dfarc | | - dialog | [] [] | - dico | | - diffutils | [] | - dink | | - doodle | | - e2fsprogs | [] | - enscript | [] | - exif | | - fetchmail | [] | - findutils | [] | - flex | [] | - freedink | | - gas | | - gawk | [] [] | - gcal | [] | - gcc | | - gettext-examples | [] [] [] [] | - gettext-runtime | [] [] | - gettext-tools | [] [] | - gip | [] | - gjay | | - gliv | [] | - glunarclock | [] [] | - gnubiff | | - gnucash | [] | - gnuedu | | - gnulib | | - gnunet | | - gnunet-gtk | | - gnutls | | - gold | | - gpe-aerial | | - gpe-beam | | - gpe-bluetooth | | - gpe-calendar | | - gpe-clock | [] | - gpe-conf | | - gpe-contacts | | - gpe-edit | | - gpe-filemanager | | - gpe-go | | - gpe-login | | - gpe-ownerinfo | [] | - gpe-package | | - gpe-sketchbook | | - gpe-su | [] | - gpe-taskmanager | [] | - gpe-timesheet | [] | - gpe-today | [] | - gpe-todo | | - gphoto2 | | - gprof | [] | - gpsdrive | | - gramadoir | | - grep | | - grub | [] [] | - gsasl | | - gss | | - gst-plugins-bad | [] | - gst-plugins-base | [] | - gst-plugins-good | [] | - gst-plugins-ugly | [] | - gstreamer | [] [] [] | - gtick | | - gtkam | [] | - gtkorphan | [] | - gtkspell | [] [] [] | - gutenprint | | - hello | [] | - help2man | | - hylafax | | - idutils | | - indent | [] [] | - iso_15924 | | - iso_3166 | [] [] [] [] [] [] [] | - iso_3166_2 | | - iso_4217 | | - iso_639 | [] [] [] [] | - iso_639_3 | | - jwhois | | - kbd | | - keytouch | [] | - keytouch-editor | | - keytouch-keyboa... | [] | - klavaro | [] | - latrine | | - ld | [] | - leafpad | [] [] | - libc | [] [] | - libexif | () | - libextractor | | - libgnutls | | - libgpewidget | | - libgpg-error | | - libgphoto2 | | - libgphoto2_port | | - libgsasl | | - libiconv | [] | - libidn | | - lifelines | | - liferea | [] [] | - lilypond | | - linkdr | [] | - lordsawar | | - lprng | | - lynx | [] | - m4 | | - mailfromd | | - mailutils | | - make | | - man-db | | - man-db-manpages | | - minicom | | - mkisofs | | - myserver | | - nano | [] [] | - opcodes | | - parted | | - pies | | - popt | | - psmisc | | - pspp | [] | - pwdutils | | - radius | [] | - recode | [] [] | - rosegarden | | - rpm | | - rush | | - sarg | | - screem | | - scrollkeeper | [] [] [] | - sed | [] [] | - sharutils | [] [] | - shishi | | - skencil | | - solfege | | - solfege-manual | | - soundtracker | | - sp | | - sysstat | | - tar | [] | - texinfo | | - tin | | - unicode-han-tra... | | - unicode-transla... | | - util-linux-ng | [] | - vice | | - vmm | | - vorbis-tools | | - wastesedge | | - wdiff | | - wget | [] [] | - wyslij-po | | - xchat | [] [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] | - +--------------------------------------------------+ - af am an ar as ast az be be@latin bg bn_IN bs ca - 6 0 1 2 3 19 1 10 3 28 3 1 38 - - crh cs da de el en en_GB en_ZA eo es et eu fa - +-------------------------------------------------+ - a2ps | [] [] [] [] [] [] [] | - aegis | [] [] [] | - ant-phone | [] () | - anubis | [] [] | - aspell | [] [] [] [] [] | - bash | [] [] [] | - bfd | [] | - bibshelf | [] [] [] | - binutils | [] | - bison | [] [] | - bison-runtime | [] [] [] [] | - bluez-pin | [] [] [] [] [] [] | - bombono-dvd | [] | - buzztard | [] [] [] | - cflow | [] [] | - clisp | [] [] [] [] | - coreutils | [] [] [] [] | - cpio | | - cppi | | - cpplib | [] [] [] | - cryptsetup | [] | - dfarc | [] [] [] | - dialog | [] [] [] [] [] | - dico | | - diffutils | [] [] [] [] [] [] | - dink | [] [] [] | - doodle | [] | - e2fsprogs | [] [] [] | - enscript | [] [] [] | - exif | () [] [] | - fetchmail | [] [] () [] [] [] | - findutils | [] [] [] | - flex | [] [] | - freedink | [] [] [] | - gas | [] | - gawk | [] [] [] | - gcal | [] | - gcc | [] [] | - gettext-examples | [] [] [] [] | - gettext-runtime | [] [] [] [] | - gettext-tools | [] [] [] | - gip | [] [] [] [] | - gjay | [] | - gliv | [] [] [] | - glunarclock | [] [] | - gnubiff | () | - gnucash | [] () () () () | - gnuedu | [] [] | - gnulib | [] [] | - gnunet | | - gnunet-gtk | [] | - gnutls | [] [] | - gold | [] | - gpe-aerial | [] [] [] [] | - gpe-beam | [] [] [] [] | - gpe-bluetooth | [] [] | - gpe-calendar | [] | - gpe-clock | [] [] [] [] | - gpe-conf | [] [] [] | - gpe-contacts | [] [] [] | - gpe-edit | [] [] | - gpe-filemanager | [] [] [] | - gpe-go | [] [] [] [] | - gpe-login | [] [] | - gpe-ownerinfo | [] [] [] [] | - gpe-package | [] [] [] | - gpe-sketchbook | [] [] [] [] | - gpe-su | [] [] [] [] | - gpe-taskmanager | [] [] [] [] | - gpe-timesheet | [] [] [] [] | - gpe-today | [] [] [] [] | - gpe-todo | [] [] [] | - gphoto2 | [] [] () [] [] [] | - gprof | [] [] [] | - gpsdrive | [] [] [] | - gramadoir | [] [] [] | - grep | [] | - grub | [] [] | - gsasl | [] | - gss | | - gst-plugins-bad | [] [] [] [] [] | - gst-plugins-base | [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] | - gtick | [] () [] | - gtkam | [] [] () [] [] | - gtkorphan | [] [] [] [] | - gtkspell | [] [] [] [] [] [] [] | - gutenprint | [] [] [] | - hello | [] [] [] [] | - help2man | [] | - hylafax | [] [] | - idutils | [] [] | - indent | [] [] [] [] [] [] [] | - iso_15924 | [] () [] [] | - iso_3166 | [] [] [] [] () [] [] [] () | - iso_3166_2 | () | - iso_4217 | [] [] [] () [] [] | - iso_639 | [] [] [] [] () [] [] | - iso_639_3 | [] | - jwhois | [] | - kbd | [] [] [] [] [] | - keytouch | [] [] | - keytouch-editor | [] [] | - keytouch-keyboa... | [] | - klavaro | [] [] [] [] | - latrine | [] () | - ld | [] [] | - leafpad | [] [] [] [] [] [] | - libc | [] [] [] [] | - libexif | [] [] () | - libextractor | | - libgnutls | [] | - libgpewidget | [] [] | - libgpg-error | [] [] | - libgphoto2 | [] () | - libgphoto2_port | [] () [] | - libgsasl | | - libiconv | [] [] [] [] [] | - libidn | [] [] [] | - lifelines | [] () | - liferea | [] [] [] [] [] | - lilypond | [] [] [] | - linkdr | [] [] [] | - lordsawar | [] | - lprng | | - lynx | [] [] [] [] | - m4 | [] [] [] [] | - mailfromd | | - mailutils | [] | - make | [] [] [] | - man-db | | - man-db-manpages | | - minicom | [] [] [] [] | - mkisofs | | - myserver | | - nano | [] [] [] | - opcodes | [] [] | - parted | [] [] | - pies | | - popt | [] [] [] [] [] | - psmisc | [] [] [] | - pspp | [] | - pwdutils | [] | - radius | [] | - recode | [] [] [] [] [] [] | - rosegarden | () () () | - rpm | [] [] [] | - rush | | - sarg | | - screem | | - scrollkeeper | [] [] [] [] [] | - sed | [] [] [] [] [] [] | - sharutils | [] [] [] [] | - shishi | | - skencil | [] () [] | - solfege | [] [] [] | - solfege-manual | [] [] | - soundtracker | [] [] [] | - sp | [] | - sysstat | [] [] [] | - tar | [] [] [] [] | - texinfo | [] [] [] | - tin | [] [] | - unicode-han-tra... | | - unicode-transla... | | - util-linux-ng | [] [] [] [] | - vice | () () | - vmm | [] | - vorbis-tools | [] [] | - wastesedge | [] | - wdiff | [] [] | - wget | [] [] [] | - wyslij-po | | - xchat | [] [] [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] [] [] | - +-------------------------------------------------+ - crh cs da de el en en_GB en_ZA eo es et eu fa - 5 64 105 117 18 1 8 0 28 89 18 19 0 - - fi fr ga gl gu he hi hr hu hy id is it ja ka kn - +----------------------------------------------------+ - a2ps | [] [] [] [] | - aegis | [] [] | - ant-phone | [] [] | - anubis | [] [] [] [] | - aspell | [] [] [] [] | - bash | [] [] [] [] | - bfd | [] [] [] | - bibshelf | [] [] [] [] [] | - binutils | [] [] [] | - bison | [] [] [] [] | - bison-runtime | [] [] [] [] [] [] | - bluez-pin | [] [] [] [] [] [] [] [] | - bombono-dvd | [] | - buzztard | [] | - cflow | [] [] [] | - clisp | [] | - coreutils | [] [] [] [] [] | - cpio | [] [] [] [] | - cppi | [] [] | - cpplib | [] [] [] | - cryptsetup | [] [] [] | - dfarc | [] [] [] | - dialog | [] [] [] [] [] [] [] | - dico | | - diffutils | [] [] [] [] [] [] [] [] [] | - dink | [] | - doodle | [] [] | - e2fsprogs | [] [] | - enscript | [] [] [] [] | - exif | [] [] [] [] [] [] | - fetchmail | [] [] [] [] | - findutils | [] [] [] [] [] [] | - flex | [] [] [] | - freedink | [] [] [] | - gas | [] [] | - gawk | [] [] [] [] () [] | - gcal | [] | - gcc | [] | - gettext-examples | [] [] [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] [] | - gettext-tools | [] [] [] [] | - gip | [] [] [] [] [] [] | - gjay | [] | - gliv | [] () | - glunarclock | [] [] [] [] | - gnubiff | () [] () | - gnucash | () () () () () [] | - gnuedu | [] [] | - gnulib | [] [] [] [] [] [] | - gnunet | | - gnunet-gtk | [] | - gnutls | [] [] | - gold | [] [] | - gpe-aerial | [] [] [] | - gpe-beam | [] [] [] [] | - gpe-bluetooth | [] [] [] [] | - gpe-calendar | [] [] | - gpe-clock | [] [] [] [] [] | - gpe-conf | [] [] [] [] | - gpe-contacts | [] [] [] [] | - gpe-edit | [] [] [] | - gpe-filemanager | [] [] [] [] | - gpe-go | [] [] [] [] [] | - gpe-login | [] [] [] | - gpe-ownerinfo | [] [] [] [] [] | - gpe-package | [] [] [] | - gpe-sketchbook | [] [] [] [] | - gpe-su | [] [] [] [] [] [] | - gpe-taskmanager | [] [] [] [] [] | - gpe-timesheet | [] [] [] [] [] | - gpe-today | [] [] [] [] [] [] [] | - gpe-todo | [] [] [] | - gphoto2 | [] [] [] [] [] [] | - gprof | [] [] [] [] | - gpsdrive | [] [] [] | - gramadoir | [] [] [] | - grep | [] [] | - grub | [] [] [] [] | - gsasl | [] [] [] [] [] | - gss | [] [] [] [] [] | - gst-plugins-bad | [] [] [] [] [] [] | - gst-plugins-base | [] [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] | - gtick | [] [] [] [] [] | - gtkam | [] [] [] [] [] | - gtkorphan | [] [] [] | - gtkspell | [] [] [] [] [] [] [] [] [] | - gutenprint | [] [] [] [] | - hello | [] [] [] | - help2man | [] [] | - hylafax | [] | - idutils | [] [] [] [] [] [] | - indent | [] [] [] [] [] [] [] [] | - iso_15924 | [] () [] [] | - iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] | - iso_3166_2 | () [] [] [] | - iso_4217 | [] () [] [] [] [] | - iso_639 | [] () [] [] [] [] [] [] [] | - iso_639_3 | () [] [] | - jwhois | [] [] [] [] [] | - kbd | [] [] | - keytouch | [] [] [] [] [] [] | - keytouch-editor | [] [] [] [] [] | - keytouch-keyboa... | [] [] [] [] [] | - klavaro | [] [] | - latrine | [] [] [] | - ld | [] [] [] [] | - leafpad | [] [] [] [] [] [] [] () | - libc | [] [] [] [] [] | - libexif | [] | - libextractor | | - libgnutls | [] [] | - libgpewidget | [] [] [] [] | - libgpg-error | [] [] | - libgphoto2 | [] [] [] | - libgphoto2_port | [] [] [] | - libgsasl | [] [] [] [] [] | - libiconv | [] [] [] [] [] [] | - libidn | [] [] [] [] | - lifelines | () | - liferea | [] [] [] [] | - lilypond | [] [] | - linkdr | [] [] [] [] [] | - lordsawar | | - lprng | [] | - lynx | [] [] [] [] [] | - m4 | [] [] [] [] [] [] | - mailfromd | | - mailutils | [] [] | - make | [] [] [] [] [] [] [] [] [] | - man-db | [] [] | - man-db-manpages | [] | - minicom | [] [] [] [] [] | - mkisofs | [] [] [] [] | - myserver | | - nano | [] [] [] [] [] [] | - opcodes | [] [] [] [] | - parted | [] [] [] [] | - pies | | - popt | [] [] [] [] [] [] [] [] [] | - psmisc | [] [] [] | - pspp | | - pwdutils | [] [] | - radius | [] [] | - recode | [] [] [] [] [] [] [] [] | - rosegarden | () () () () () | - rpm | [] [] | - rush | | - sarg | [] | - screem | [] [] | - scrollkeeper | [] [] [] [] | - sed | [] [] [] [] [] [] [] [] | - sharutils | [] [] [] [] [] [] [] | - shishi | [] | - skencil | [] | - solfege | [] [] [] [] | - solfege-manual | [] [] | - soundtracker | [] [] | - sp | [] () | - sysstat | [] [] [] [] [] | - tar | [] [] [] [] [] [] [] | - texinfo | [] [] [] [] | - tin | [] | - unicode-han-tra... | | - unicode-transla... | [] [] | - util-linux-ng | [] [] [] [] [] [] | - vice | () () () | - vmm | [] | - vorbis-tools | [] | - wastesedge | () () | - wdiff | [] | - wget | [] [] [] [] [] [] [] [] | - wyslij-po | [] [] [] | - xchat | [] [] [] [] [] [] [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] [] | - +----------------------------------------------------+ - fi fr ga gl gu he hi hr hu hy id is it ja ka kn - 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4 - - ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne - +-----------------------------------------------+ - a2ps | [] | - aegis | | - ant-phone | | - anubis | [] [] | - aspell | [] | - bash | | - bfd | | - bibshelf | [] [] | - binutils | | - bison | [] | - bison-runtime | [] [] [] [] [] | - bluez-pin | [] [] [] [] [] | - bombono-dvd | | - buzztard | | - cflow | | - clisp | | - coreutils | [] | - cpio | | - cppi | | - cpplib | | - cryptsetup | | - dfarc | [] | - dialog | [] [] [] [] [] | - dico | | - diffutils | [] [] | - dink | | - doodle | | - e2fsprogs | | - enscript | | - exif | [] | - fetchmail | | - findutils | | - flex | | - freedink | [] | - gas | | - gawk | | - gcal | | - gcc | | - gettext-examples | [] [] [] [] | - gettext-runtime | [] | - gettext-tools | [] | - gip | [] [] | - gjay | | - gliv | | - glunarclock | [] | - gnubiff | | - gnucash | () () () () | - gnuedu | | - gnulib | | - gnunet | | - gnunet-gtk | | - gnutls | [] | - gold | | - gpe-aerial | [] | - gpe-beam | [] | - gpe-bluetooth | [] [] | - gpe-calendar | [] | - gpe-clock | [] [] [] [] [] | - gpe-conf | [] [] | - gpe-contacts | [] [] | - gpe-edit | [] | - gpe-filemanager | [] [] | - gpe-go | [] [] [] | - gpe-login | [] | - gpe-ownerinfo | [] [] | - gpe-package | [] [] | - gpe-sketchbook | [] [] | - gpe-su | [] [] [] [] [] [] | - gpe-taskmanager | [] [] [] [] [] [] | - gpe-timesheet | [] [] | - gpe-today | [] [] [] [] | - gpe-todo | [] [] | - gphoto2 | | - gprof | [] | - gpsdrive | | - gramadoir | | - grep | | - grub | | - gsasl | | - gss | | - gst-plugins-bad | [] [] [] [] | - gst-plugins-base | [] [] | - gst-plugins-good | [] [] | - gst-plugins-ugly | [] [] [] [] [] | - gstreamer | | - gtick | | - gtkam | [] | - gtkorphan | [] [] | - gtkspell | [] [] [] [] [] [] [] | - gutenprint | | - hello | [] [] [] | - help2man | | - hylafax | | - idutils | | - indent | | - iso_15924 | [] [] | - iso_3166 | [] [] () [] [] [] [] [] | - iso_3166_2 | | - iso_4217 | [] [] | - iso_639 | [] [] | - iso_639_3 | [] | - jwhois | [] | - kbd | | - keytouch | [] | - keytouch-editor | [] | - keytouch-keyboa... | [] | - klavaro | [] | - latrine | [] | - ld | | - leafpad | [] [] [] | - libc | [] | - libexif | | - libextractor | | - libgnutls | [] | - libgpewidget | [] [] | - libgpg-error | | - libgphoto2 | | - libgphoto2_port | | - libgsasl | | - libiconv | | - libidn | | - lifelines | | - liferea | | - lilypond | | - linkdr | | - lordsawar | | - lprng | | - lynx | | - m4 | | - mailfromd | | - mailutils | | - make | [] | - man-db | | - man-db-manpages | | - minicom | [] | - mkisofs | | - myserver | | - nano | [] [] | - opcodes | | - parted | | - pies | | - popt | [] [] [] | - psmisc | | - pspp | | - pwdutils | | - radius | | - recode | | - rosegarden | | - rpm | | - rush | | - sarg | | - screem | | - scrollkeeper | [] [] | - sed | | - sharutils | | - shishi | | - skencil | | - solfege | [] | - solfege-manual | | - soundtracker | | - sp | | - sysstat | [] | - tar | [] | - texinfo | [] | - tin | | - unicode-han-tra... | | - unicode-transla... | | - util-linux-ng | | - vice | | - vmm | | - vorbis-tools | | - wastesedge | | - wdiff | | - wget | [] | - wyslij-po | | - xchat | [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] | - +-----------------------------------------------+ - ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne - 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1 - - nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr - +---------------------------------------------------+ - a2ps | [] [] [] [] [] [] [] [] | - aegis | [] [] [] | - ant-phone | [] [] | - anubis | [] [] [] | - aspell | [] [] [] [] [] | - bash | [] [] | - bfd | [] | - bibshelf | [] [] | - binutils | [] [] | - bison | [] [] [] | - bison-runtime | [] [] [] [] [] [] [] | - bluez-pin | [] [] [] [] [] [] [] [] | - bombono-dvd | [] () | - buzztard | [] [] | - cflow | [] | - clisp | [] [] | - coreutils | [] [] [] [] [] [] | - cpio | [] [] [] | - cppi | [] | - cpplib | [] | - cryptsetup | [] | - dfarc | [] | - dialog | [] [] [] [] | - dico | [] | - diffutils | [] [] [] [] [] [] | - dink | () | - doodle | [] [] | - e2fsprogs | [] [] | - enscript | [] [] [] [] [] | - exif | [] [] [] () [] | - fetchmail | [] [] [] [] | - findutils | [] [] [] [] [] | - flex | [] [] [] [] [] | - freedink | [] [] | - gas | | - gawk | [] [] [] [] | - gcal | | - gcc | [] | - gettext-examples | [] [] [] [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] [] [] [] [] | - gettext-tools | [] [] [] [] [] [] | - gip | [] [] [] [] [] | - gjay | | - gliv | [] [] [] [] [] [] | - glunarclock | [] [] [] [] [] | - gnubiff | [] () | - gnucash | [] () () () | - gnuedu | [] | - gnulib | [] [] [] [] | - gnunet | | - gnunet-gtk | | - gnutls | [] [] | - gold | | - gpe-aerial | [] [] [] [] [] [] [] | - gpe-beam | [] [] [] [] [] [] [] | - gpe-bluetooth | [] [] | - gpe-calendar | [] [] [] [] | - gpe-clock | [] [] [] [] [] [] [] [] | - gpe-conf | [] [] [] [] [] [] [] | - gpe-contacts | [] [] [] [] [] | - gpe-edit | [] [] [] | - gpe-filemanager | [] [] [] | - gpe-go | [] [] [] [] [] [] [] [] | - gpe-login | [] [] | - gpe-ownerinfo | [] [] [] [] [] [] [] [] | - gpe-package | [] [] | - gpe-sketchbook | [] [] [] [] [] [] [] | - gpe-su | [] [] [] [] [] [] [] [] | - gpe-taskmanager | [] [] [] [] [] [] [] [] | - gpe-timesheet | [] [] [] [] [] [] [] [] | - gpe-today | [] [] [] [] [] [] [] [] | - gpe-todo | [] [] [] [] [] | - gphoto2 | [] [] [] [] [] [] [] [] | - gprof | [] [] [] | - gpsdrive | [] [] | - gramadoir | [] [] | - grep | [] [] [] [] | - grub | [] [] [] | - gsasl | [] [] [] [] | - gss | [] [] [] | - gst-plugins-bad | [] [] [] [] [] [] | - gst-plugins-base | [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] | - gtick | [] [] [] | - gtkam | [] [] [] [] [] [] | - gtkorphan | [] | - gtkspell | [] [] [] [] [] [] [] [] [] [] | - gutenprint | [] [] | - hello | [] [] [] [] | - help2man | [] [] | - hylafax | [] | - idutils | [] [] [] [] [] | - indent | [] [] [] [] [] [] [] | - iso_15924 | [] [] [] [] | - iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] | - iso_3166_2 | [] [] [] | - iso_4217 | [] [] [] [] [] [] [] [] | - iso_639 | [] [] [] [] [] [] [] [] [] | - iso_639_3 | [] [] | - jwhois | [] [] [] [] | - kbd | [] [] [] | - keytouch | [] [] [] | - keytouch-editor | [] [] [] | - keytouch-keyboa... | [] [] [] | - klavaro | [] [] | - latrine | [] [] | - ld | | - leafpad | [] [] [] [] [] [] [] [] [] | - libc | [] [] [] [] | - libexif | [] [] () [] | - libextractor | | - libgnutls | [] [] | - libgpewidget | [] [] [] | - libgpg-error | [] [] | - libgphoto2 | [] [] | - libgphoto2_port | [] [] [] [] [] | - libgsasl | [] [] [] [] [] | - libiconv | [] [] [] [] [] | - libidn | [] [] | - lifelines | [] [] | - liferea | [] [] [] [] [] () () [] | - lilypond | [] | - linkdr | [] [] [] | - lordsawar | | - lprng | [] | - lynx | [] [] [] | - m4 | [] [] [] [] [] | - mailfromd | [] | - mailutils | [] | - make | [] [] [] [] | - man-db | [] [] [] | - man-db-manpages | [] [] [] | - minicom | [] [] [] [] | - mkisofs | [] [] [] | - myserver | | - nano | [] [] [] [] | - opcodes | [] [] | - parted | [] [] [] [] | - pies | [] | - popt | [] [] [] [] | - psmisc | [] [] [] | - pspp | [] [] | - pwdutils | [] | - radius | [] [] [] | - recode | [] [] [] [] [] [] [] [] | - rosegarden | () () | - rpm | [] [] [] | - rush | [] [] | - sarg | | - screem | | - scrollkeeper | [] [] [] [] [] [] [] [] | - sed | [] [] [] [] [] [] [] [] [] | - sharutils | [] [] [] [] | - shishi | [] | - skencil | [] [] | - solfege | [] [] [] [] | - solfege-manual | [] [] [] | - soundtracker | [] | - sp | | - sysstat | [] [] [] [] | - tar | [] [] [] [] | - texinfo | [] [] [] [] | - tin | [] | - unicode-han-tra... | | - unicode-transla... | | - util-linux-ng | [] [] [] [] [] | - vice | [] | - vmm | [] | - vorbis-tools | [] [] | - wastesedge | [] | - wdiff | [] [] | - wget | [] [] [] [] [] [] [] | - wyslij-po | [] [] [] | - xchat | [] [] [] [] [] [] [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] | - +---------------------------------------------------+ - nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr - 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37 - - sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW - +---------------------------------------------------+ - a2ps | [] [] [] [] [] | 27 - aegis | [] | 9 - ant-phone | [] [] [] [] | 9 - anubis | [] [] [] [] | 15 - aspell | [] [] [] | 20 - bash | [] [] [] | 12 - bfd | [] | 6 - bibshelf | [] [] [] | 16 - binutils | [] [] | 8 - bison | [] [] | 12 - bison-runtime | [] [] [] [] [] [] | 29 - bluez-pin | [] [] [] [] [] [] [] [] | 37 - bombono-dvd | [] | 4 - buzztard | [] | 7 - cflow | [] [] [] | 9 - clisp | | 10 - coreutils | [] [] [] [] | 22 - cpio | [] [] [] [] [] [] | 13 - cppi | [] [] | 5 - cpplib | [] [] [] [] [] [] | 14 - cryptsetup | [] [] | 7 - dfarc | [] | 9 - dialog | [] [] [] [] [] [] [] | 30 - dico | [] | 2 - diffutils | [] [] [] [] [] [] | 30 - dink | | 4 - doodle | [] [] | 7 - e2fsprogs | [] [] [] | 11 - enscript | [] [] [] [] | 17 - exif | [] [] [] | 16 - fetchmail | [] [] [] | 17 - findutils | [] [] [] [] [] | 20 - flex | [] [] [] [] | 15 - freedink | [] | 10 - gas | [] | 4 - gawk | [] [] [] [] | 18 - gcal | [] [] | 5 - gcc | [] [] [] | 7 - gettext-examples | [] [] [] [] [] [] [] | 34 - gettext-runtime | [] [] [] [] [] [] [] | 29 - gettext-tools | [] [] [] [] [] [] | 22 - gip | [] [] [] [] | 22 - gjay | [] | 3 - gliv | [] [] [] | 14 - glunarclock | [] [] [] [] [] | 19 - gnubiff | [] [] | 4 - gnucash | () [] () [] () | 10 - gnuedu | [] [] | 7 - gnulib | [] [] [] [] | 16 - gnunet | [] | 1 - gnunet-gtk | [] [] [] | 5 - gnutls | [] [] [] | 10 - gold | [] | 4 - gpe-aerial | [] [] [] | 18 - gpe-beam | [] [] [] | 19 - gpe-bluetooth | [] [] [] | 13 - gpe-calendar | [] [] [] [] | 12 - gpe-clock | [] [] [] [] [] | 28 - gpe-conf | [] [] [] [] | 20 - gpe-contacts | [] [] [] | 17 - gpe-edit | [] [] [] | 12 - gpe-filemanager | [] [] [] [] | 16 - gpe-go | [] [] [] [] [] | 25 - gpe-login | [] [] [] | 11 - gpe-ownerinfo | [] [] [] [] [] | 25 - gpe-package | [] [] [] | 13 - gpe-sketchbook | [] [] [] | 20 - gpe-su | [] [] [] [] [] | 30 - gpe-taskmanager | [] [] [] [] [] | 29 - gpe-timesheet | [] [] [] [] [] | 25 - gpe-today | [] [] [] [] [] [] | 30 - gpe-todo | [] [] [] [] | 17 - gphoto2 | [] [] [] [] [] | 24 - gprof | [] [] [] | 15 - gpsdrive | [] [] [] | 11 - gramadoir | [] [] [] | 11 - grep | [] [] [] | 10 - grub | [] [] [] | 14 - gsasl | [] [] [] [] | 14 - gss | [] [] [] | 11 - gst-plugins-bad | [] [] [] [] | 26 - gst-plugins-base | [] [] [] [] [] | 24 - gst-plugins-good | [] [] [] [] | 24 - gst-plugins-ugly | [] [] [] [] [] | 29 - gstreamer | [] [] [] [] | 22 - gtick | [] [] [] | 13 - gtkam | [] [] [] | 20 - gtkorphan | [] [] [] | 14 - gtkspell | [] [] [] [] [] [] [] [] [] | 45 - gutenprint | [] | 10 - hello | [] [] [] [] [] [] | 21 - help2man | [] [] | 7 - hylafax | [] | 5 - idutils | [] [] [] [] | 17 - indent | [] [] [] [] [] [] | 30 - iso_15924 | () [] () [] [] | 16 - iso_3166 | [] [] () [] [] () [] [] [] () | 53 - iso_3166_2 | () [] () [] | 9 - iso_4217 | [] () [] [] () [] [] | 26 - iso_639 | [] [] [] () [] () [] [] [] [] | 38 - iso_639_3 | [] () | 8 - jwhois | [] [] [] [] [] | 16 - kbd | [] [] [] [] [] | 15 - keytouch | [] [] [] | 16 - keytouch-editor | [] [] [] | 14 - keytouch-keyboa... | [] [] [] | 14 - klavaro | [] | 11 - latrine | [] [] [] | 10 - ld | [] [] [] [] | 11 - leafpad | [] [] [] [] [] [] | 33 - libc | [] [] [] [] [] | 21 - libexif | [] () | 7 - libextractor | [] | 1 - libgnutls | [] [] [] | 9 - libgpewidget | [] [] [] | 14 - libgpg-error | [] [] [] | 9 - libgphoto2 | [] [] | 8 - libgphoto2_port | [] [] [] [] | 14 - libgsasl | [] [] [] | 13 - libiconv | [] [] [] [] | 21 - libidn | () [] [] | 11 - lifelines | [] | 4 - liferea | [] [] [] | 21 - lilypond | [] | 7 - linkdr | [] [] [] [] [] | 17 - lordsawar | | 1 - lprng | [] | 3 - lynx | [] [] [] [] | 17 - m4 | [] [] [] [] | 19 - mailfromd | [] [] | 3 - mailutils | [] | 5 - make | [] [] [] [] | 21 - man-db | [] [] [] | 8 - man-db-manpages | | 4 - minicom | [] [] | 16 - mkisofs | [] [] | 9 - myserver | | 0 - nano | [] [] [] [] | 21 - opcodes | [] [] [] | 11 - parted | [] [] [] [] [] | 15 - pies | [] [] | 3 - popt | [] [] [] [] [] [] | 27 - psmisc | [] [] | 11 - pspp | | 4 - pwdutils | [] [] | 6 - radius | [] [] | 9 - recode | [] [] [] [] | 28 - rosegarden | () | 0 - rpm | [] [] [] | 11 - rush | [] [] | 4 - sarg | | 1 - screem | [] | 3 - scrollkeeper | [] [] [] [] [] | 27 - sed | [] [] [] [] [] | 30 - sharutils | [] [] [] [] [] | 22 - shishi | [] | 3 - skencil | [] [] | 7 - solfege | [] [] [] [] | 16 - solfege-manual | [] | 8 - soundtracker | [] [] [] | 9 - sp | [] | 3 - sysstat | [] [] | 15 - tar | [] [] [] [] [] [] | 23 - texinfo | [] [] [] [] [] | 17 - tin | | 4 - unicode-han-tra... | | 0 - unicode-transla... | | 2 - util-linux-ng | [] [] [] [] | 20 - vice | () () | 1 - vmm | [] | 4 - vorbis-tools | [] | 6 - wastesedge | | 2 - wdiff | [] [] | 7 - wget | [] [] [] [] [] | 26 - wyslij-po | [] [] | 8 - xchat | [] [] [] [] [] [] | 36 - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | 63 - xkeyboard-config | [] [] [] | 22 - +---------------------------------------------------+ - 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW - 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41 2618 - - Some counters in the preceding matrix are higher than the number of -visible blocks let us expect. This is because a few extra PO files are -used for implementing regional variants of languages, or language -dialects. - - For a PO file in the matrix above to be effective, the package to -which it applies should also have been internationalized and -distributed as such by its maintainer. There might be an observable -lag between the mere existence a PO file and its wide availability in a -distribution. - - If June 2010 seems to be old, you may fetch a more recent copy of -this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date -matrix with full percentage details can be found at -`http://translationproject.org/extra/matrix.html'. - -1.5 Using `gettext' in new packages -=================================== - -If you are writing a freely available program and want to -internationalize it you are welcome to use GNU `gettext' in your -package. Of course you have to respect the GNU Library General Public -License which covers the use of the GNU `gettext' library. This means -in particular that even non-free programs can use `libintl' as a shared -library, whereas only free software can use `libintl' as a static -library or use modified versions of `libintl'. - - Once the sources are changed appropriately and the setup can handle -the use of `gettext' the only thing missing are the translations. The -Free Translation Project is also available for packages which are not -developed inside the GNU project. Therefore the information given above -applies also for every other Free Software Project. Contact -`coordinator@translationproject.org' to make the `.pot' files available -to the translation teams. - diff -Nru tilda-1.5.2/aclocal.m4 tilda-1.5.4/aclocal.m4 --- tilda-1.5.2/aclocal.m4 2020-05-10 14:15:44.000000000 +0000 +++ tilda-1.5.4/aclocal.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,1505 +0,0 @@ -# generated automatically by aclocal 1.15.1 -*- Autoconf -*- - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. - -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, -[m4_warning([this file was generated for autoconf 2.69. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically 'autoreconf'.])]) - -dnl pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -dnl serial 11 (pkg-config-0.29.1) -dnl -dnl Copyright © 2004 Scott James Remnant . -dnl Copyright © 2012-2015 Dan Nicholson -dnl -dnl This program is free software; you can redistribute it and/or modify -dnl it under the terms of the GNU General Public License as published by -dnl the Free Software Foundation; either version 2 of the License, or -dnl (at your option) any later version. -dnl -dnl This program is distributed in the hope that it will be useful, but -dnl WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl General Public License for more details. -dnl -dnl You should have received a copy of the GNU General Public License -dnl along with this program; if not, write to the Free Software -dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -dnl 02111-1307, USA. -dnl -dnl As a special exception to the GNU General Public License, if you -dnl distribute this file as part of a program that contains a -dnl configuration script generated by Autoconf, you may include it under -dnl the same distribution terms that you use for the rest of that -dnl program. - -dnl PKG_PREREQ(MIN-VERSION) -dnl ----------------------- -dnl Since: 0.29 -dnl -dnl Verify that the version of the pkg-config macros are at least -dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's -dnl installed version of pkg-config, this checks the developer's version -dnl of pkg.m4 when generating configure. -dnl -dnl To ensure that this macro is defined, also add: -dnl m4_ifndef([PKG_PREREQ], -dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) -dnl -dnl See the "Since" comment for each macro you use to see what version -dnl of the macros you require. -m4_defun([PKG_PREREQ], -[m4_define([PKG_MACROS_VERSION], [0.29.1]) -m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, - [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) -])dnl PKG_PREREQ - -dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) -dnl ---------------------------------- -dnl Since: 0.16 -dnl -dnl Search for the pkg-config tool and set the PKG_CONFIG variable to -dnl first found in the path. Checks that the version of pkg-config found -dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is -dnl used since that's the first version where most current features of -dnl pkg-config existed. -AC_DEFUN([PKG_PROG_PKG_CONFIG], -[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) -m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) -AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) -AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) -AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=m4_default([$1], [0.9.0]) - AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - PKG_CONFIG="" - fi -fi[]dnl -])dnl PKG_PROG_PKG_CONFIG - -dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -dnl ------------------------------------------------------------------- -dnl Since: 0.18 -dnl -dnl Check to see whether a particular set of modules exists. Similar to -dnl PKG_CHECK_MODULES(), but does not set variables or print errors. -dnl -dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -dnl only at the first occurence in configure.ac, so if the first place -dnl it's called might be skipped (such as if it is within an "if", you -dnl have to call PKG_CHECK_EXISTS manually -AC_DEFUN([PKG_CHECK_EXISTS], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -if test -n "$PKG_CONFIG" && \ - AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then - m4_default([$2], [:]) -m4_ifvaln([$3], [else - $3])dnl -fi]) - -dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -dnl --------------------------------------------- -dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting -dnl pkg_failed based on the result. -m4_define([_PKG_CONFIG], -[if test -n "$$1"; then - pkg_cv_[]$1="$$1" - elif test -n "$PKG_CONFIG"; then - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes ], - [pkg_failed=yes]) - else - pkg_failed=untried -fi[]dnl -])dnl _PKG_CONFIG - -dnl _PKG_SHORT_ERRORS_SUPPORTED -dnl --------------------------- -dnl Internal check to see if pkg-config supports short errors. -AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi[]dnl -])dnl _PKG_SHORT_ERRORS_SUPPORTED - - -dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -dnl [ACTION-IF-NOT-FOUND]) -dnl -------------------------------------------------------------- -dnl Since: 0.4.0 -dnl -dnl Note that if there is a possibility the first call to -dnl PKG_CHECK_MODULES might not happen, you should be sure to include an -dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -AC_DEFUN([PKG_CHECK_MODULES], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl -AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl - -pkg_failed=no -AC_MSG_CHECKING([for $1]) - -_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) -_PKG_CONFIG([$1][_LIBS], [libs], [$2]) - -m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS -and $1[]_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details.]) - -if test $pkg_failed = yes; then - AC_MSG_RESULT([no]) - _PKG_SHORT_ERRORS_SUPPORTED - if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` - else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - - m4_default([$4], [AC_MSG_ERROR( -[Package requirements ($2) were not met: - -$$1_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -_PKG_TEXT])[]dnl - ]) -elif test $pkg_failed = untried; then - AC_MSG_RESULT([no]) - m4_default([$4], [AC_MSG_FAILURE( -[The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -_PKG_TEXT - -To get pkg-config, see .])[]dnl - ]) -else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS - AC_MSG_RESULT([yes]) - $3 -fi[]dnl -])dnl PKG_CHECK_MODULES - - -dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -dnl [ACTION-IF-NOT-FOUND]) -dnl --------------------------------------------------------------------- -dnl Since: 0.29 -dnl -dnl Checks for existence of MODULES and gathers its build flags with -dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags -dnl and VARIABLE-PREFIX_LIBS from --libs. -dnl -dnl Note that if there is a possibility the first call to -dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to -dnl include an explicit call to PKG_PROG_PKG_CONFIG in your -dnl configure.ac. -AC_DEFUN([PKG_CHECK_MODULES_STATIC], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -_save_PKG_CONFIG=$PKG_CONFIG -PKG_CONFIG="$PKG_CONFIG --static" -PKG_CHECK_MODULES($@) -PKG_CONFIG=$_save_PKG_CONFIG[]dnl -])dnl PKG_CHECK_MODULES_STATIC - - -dnl PKG_INSTALLDIR([DIRECTORY]) -dnl ------------------------- -dnl Since: 0.27 -dnl -dnl Substitutes the variable pkgconfigdir as the location where a module -dnl should install pkg-config .pc files. By default the directory is -dnl $libdir/pkgconfig, but the default can be changed by passing -dnl DIRECTORY. The user can override through the --with-pkgconfigdir -dnl parameter. -AC_DEFUN([PKG_INSTALLDIR], -[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) -m4_pushdef([pkg_description], - [pkg-config installation directory @<:@]pkg_default[@:>@]) -AC_ARG_WITH([pkgconfigdir], - [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, - [with_pkgconfigdir=]pkg_default) -AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) -m4_popdef([pkg_default]) -m4_popdef([pkg_description]) -])dnl PKG_INSTALLDIR - - -dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) -dnl -------------------------------- -dnl Since: 0.27 -dnl -dnl Substitutes the variable noarch_pkgconfigdir as the location where a -dnl module should install arch-independent pkg-config .pc files. By -dnl default the directory is $datadir/pkgconfig, but the default can be -dnl changed by passing DIRECTORY. The user can override through the -dnl --with-noarch-pkgconfigdir parameter. -AC_DEFUN([PKG_NOARCH_INSTALLDIR], -[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) -m4_pushdef([pkg_description], - [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) -AC_ARG_WITH([noarch-pkgconfigdir], - [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, - [with_noarch_pkgconfigdir=]pkg_default) -AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) -m4_popdef([pkg_default]) -m4_popdef([pkg_description]) -])dnl PKG_NOARCH_INSTALLDIR - - -dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, -dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -dnl ------------------------------------------- -dnl Since: 0.28 -dnl -dnl Retrieves the value of the pkg-config variable for the given module. -AC_DEFUN([PKG_CHECK_VAR], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl - -_PKG_CONFIG([$1], [variable="][$3]["], [$2]) -AS_VAR_COPY([$1], [pkg_cv_][$1]) - -AS_VAR_IF([$1], [""], [$5], [$4])dnl -])dnl PKG_CHECK_VAR - -# Copyright (C) 2002-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.15' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.15.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.15.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to -# '$srcdir', '$srcdir/..', or '$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is '.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -# Expand $ac_aux_dir to an absolute path. -am_aux_dir=`cd "$ac_aux_dir" && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ([2.52])dnl - m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], - [$1], [CXX], [depcc="$CXX" am_compiler_list=], - [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], - [$1], [UPC], [depcc="$UPC" am_compiler_list=], - [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES. -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE([dependency-tracking], [dnl -AS_HELP_STRING( - [--enable-dependency-tracking], - [do not reject slow dependency extractors]) -AS_HELP_STRING( - [--disable-dependency-tracking], - [speeds up one-time build])]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -AC_SUBST([am__nodep])dnl -_AM_SUBST_NOTMAKE([am__nodep])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each '.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. -m4_define([AC_PROG_CC], -m4_defn([AC_PROG_CC]) -[_AM_PROG_CC_C_O -]) - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.65])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[AC_DIAGNOSE([obsolete], - [$0: two- and three-arguments forms are deprecated.]) -m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if( - m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), - [ok:ok],, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) - AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -AM_MISSING_PROG([AUTOCONF], [autoconf]) -AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -AM_MISSING_PROG([AUTOHEADER], [autoheader]) -AM_MISSING_PROG([MAKEINFO], [makeinfo]) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target (and possibly the TAP driver). The -# system "awk" is bad on some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES([CC])], - [m4_define([AC_PROG_CC], - m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES([CXX])], - [m4_define([AC_PROG_CXX], - m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES([OBJC])], - [m4_define([AC_PROG_OBJC], - m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], - [_AM_DEPENDENCIES([OBJCXX])], - [m4_define([AC_PROG_OBJCXX], - m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl -]) -AC_REQUIRE([AM_SILENT_RULES])dnl -dnl The testsuite driver may need to know about EXEEXT, so add the -dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This -dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) - fi -fi -dnl The trailing newline in this macro's definition is deliberate, for -dnl backward compatibility and to allow trailing 'dnl'-style comments -dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. -]) - -dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST([install_sh])]) - -# Copyright (C) 2003-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- -# From Jim Meyering - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAINTAINER_MODE([DEFAULT-MODE]) -# ---------------------------------- -# Control maintainer-specific portions of Makefiles. -# Default is to disable them, unless 'enable' is passed literally. -# For symmetry, 'disable' may be passed as well. Anyway, the user -# can override the default with the --enable/--disable switch. -AC_DEFUN([AM_MAINTAINER_MODE], -[m4_case(m4_default([$1], [disable]), - [enable], [m4_define([am_maintainer_other], [disable])], - [disable], [m4_define([am_maintainer_other], [enable])], - [m4_define([am_maintainer_other], [enable]) - m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) -AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode's default is 'disable' unless 'enable' is passed - AC_ARG_ENABLE([maintainer-mode], - [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], - am_maintainer_other[ make rules and dependencies not useful - (and sometimes confusing) to the casual installer])], - [USE_MAINTAINER_MODE=$enableval], - [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) - AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST([MAINT])dnl -] -) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it is modern enough. -# If it is, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - AC_MSG_WARN(['missing' script is too old or missing]) -fi -]) - -# Copyright (C) 2003-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_MKDIR_P -# --------------- -# Check for 'mkdir -p'. -AC_DEFUN([AM_PROG_MKDIR_P], -[AC_PREREQ([2.60])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -dnl FIXME we are no longer going to remove this! adjust warning -dnl FIXME message accordingly. -AC_DIAGNOSE([obsolete], -[$0: this macro is deprecated, and will soon be removed. -You should use the Autoconf-provided 'AC][_PROG_MKDIR_P' macro instead, -and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files.]) -dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -dnl while keeping a definition of mkdir_p for backward compatibility. -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -dnl Makefile.ins that do not define MKDIR_P, so we do our own -dnl adjustment using top_builddir (which is defined more often than -dnl MKDIR_P). -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -case $mkdir_p in - [[\\/$]]* | ?:[[\\/]]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# -------------------- -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) - -# _AM_SET_OPTIONS(OPTIONS) -# ------------------------ -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_CC_C_O -# --------------- -# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC -# to automatically call this. -AC_DEFUN([_AM_PROG_CC_C_O], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -AC_LANG_PUSH([C])dnl -AC_CACHE_CHECK( - [whether $CC understands -c and -o together], - [am_cv_prog_cc_c_o], - [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i]) -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -AC_LANG_POP([C])]) - -# For backward compatibility. -AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_RUN_LOG(COMMAND) -# ------------------- -# Run COMMAND, save the exit status in ac_status, and log it. -# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) -AC_DEFUN([AM_RUN_LOG], -[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD - ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - (exit $ac_status); }]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT([yes]) -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi -AC_CONFIG_COMMANDS_PRE( - [AC_MSG_CHECKING([that generated files are newer than configure]) - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - AC_MSG_RESULT([done])]) -rm -f conftest.file -]) - -# Copyright (C) 2009-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# ("yes" being less verbose, "no" or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], [dnl -AS_HELP_STRING( - [--enable-silent-rules], - [less verbose build output (undo: "make V=1")]) -AS_HELP_STRING( - [--disable-silent-rules], - [verbose build output (undo: "make V=0")])dnl -]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -dnl -dnl A few 'make' implementations (e.g., NonStop OS and NextStep) -dnl do not support nested variable expansions. -dnl See automake bug#9928 and bug#10237. -am_make=${MAKE-make} -AC_CACHE_CHECK([whether $am_make supports nested variables], - [am_cv_make_support_nested_variables], - [if AS_ECHO([['TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AC_SUBST([AM_V])dnl -AM_SUBST_NOTMAKE([AM_V])dnl -AC_SUBST([AM_DEFAULT_V])dnl -AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor 'install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in "make install-strip", and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# -------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of 'v7', 'ustar', or 'pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -# -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AC_SUBST([AMTAR], ['$${TAR-tar}']) - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' - -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - - [m4_case([$1], - [ustar], - [# The POSIX 1988 'ustar' format is defined with fixed-size fields. - # There is notably a 21 bits limit for the UID and the GID. In fact, - # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 - # and bug#13588). - am_max_uid=2097151 # 2^21 - 1 - am_max_gid=$am_max_uid - # The $UID and $GID variables are not portable, so we need to resort - # to the POSIX-mandated id(1) utility. Errors in the 'id' calls - # below are definitely unexpected, so allow the users to see them - # (that is, avoid stderr redirection). - am_uid=`id -u || echo unknown` - am_gid=`id -g || echo unknown` - AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi - AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi], - - [pax], - [], - - [m4_fatal([Unknown tar format])]) - - AC_MSG_CHECKING([how to create a $1 tar archive]) - - # Go ahead even if we have the value already cached. We do so because we - # need to set the values for the 'am__tar' and 'am__untar' variables. - _am_tools=${am_cv_prog_tar_$1-$_am_tools} - - for _am_tool in $_am_tools; do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works. - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi - done - rm -rf conftest.dir - - AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) - AC_MSG_RESULT([$am_cv_prog_tar_$1])]) - -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([m4/gettext.m4]) -m4_include([m4/iconv.m4]) -m4_include([m4/intlmacosx.m4]) -m4_include([m4/lib-ld.m4]) -m4_include([m4/lib-link.m4]) -m4_include([m4/lib-prefix.m4]) -m4_include([m4/nls.m4]) -m4_include([m4/po.m4]) -m4_include([m4/progtest.m4]) diff -Nru tilda-1.5.2/autogen.sh tilda-1.5.4/autogen.sh --- tilda-1.5.2/autogen.sh 1970-01-01 00:00:00.000000000 +0000 +++ tilda-1.5.4/autogen.sh 2020-12-24 10:31:23.000000000 +0000 @@ -0,0 +1,81 @@ +#!/bin/sh + +echo "This script will generate the initial build system files to compile" +echo "tilda successfully. When done it will call the ./configure script" +echo "and pass on any options which you passed to this script" +echo "See ./configure --help to know which options are available" +echo +echo "When it is finished, take the usual steps to install:" +echo "make" +echo "make install" +echo + +(automake --version) < /dev/null > /dev/null 2>&1 || { + echo; + echo "You must have automake installed to compile tilda"; + echo; + exit 1; +} + +(autoconf --version) < /dev/null > /dev/null 2>&1 || { + echo; + echo "You must have autoconf installed to compile tilda"; + echo; + exit 1; +} + +(autopoint --version) < /dev/null > /dev/null 2>&1 || { + echo; + echo "You must have autopoint installed to compile tilda"; + echo; + exit 1; +} + +test -n "$srcdir" || srcdir=$(dirname "$0") +test -n "$srcdir" || srcdir=. + +olddir=$(pwd) + +cd $srcdir + +(test -f configure.ac) || { + echo "*** ERROR: Directory '$srcdir' does not look like the top-level project directory ***" + exit 1 +} + +# shellcheck disable=SC2016 +PKG_NAME=$(autoconf --trace 'AC_INIT:$1' configure.ac) + +if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then + echo "*** INFO: 'configure' will be run with no arguments." >&2 + echo "*** If you wish to pass any to it, please specify them on the" >&2 + echo "*** '$0' command line." >&2 + echo "" >&2 +fi + +echo "Generating build system configuration for tilda, please wait..." +echo; + +# Autoreconf will call run autopoint, aclocal, autoconf, autoheader and automake +# to setup and configure the build environment +autoreconf --verbose --install --symlink --force || { + echo; + echo "autoreconf has encountered an error."; + echo; + exit 1; +} + +# Next we invoke the configure script. "$@" contains the arguments that +# were passed to this script and we used it to forward them to configure. + +cd "$olddir" +if [ "$NOCONFIGURE" = "" ]; then + echo "Running configure..." + $srcdir/configure "$@" || exit 1 + + if [ "$1" = "--help" ]; then exit 0 else + echo "Now type 'make' to compile $PKG_NAME" || exit 1 + fi +else + echo "Skipping configure process." +fi diff -Nru tilda-1.5.2/build-aux/compile tilda-1.5.4/build-aux/compile --- tilda-1.5.2/build-aux/compile 2018-03-25 23:44:27.000000000 +0000 +++ tilda-1.5.4/build-aux/compile 1970-01-01 00:00:00.000000000 +0000 @@ -1,347 +0,0 @@ -#! /bin/sh -# Wrapper for compilers which do not understand '-c -o'. - -scriptversion=2012-10-14.11; # UTC - -# Copyright (C) 1999-2014 Free Software Foundation, Inc. -# Written by Tom Tromey . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# This file is maintained in Automake, please report -# bugs to or send patches to -# . - -nl=' -' - -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent tools from complaining about whitespace usage. -IFS=" "" $nl" - -file_conv= - -# func_file_conv build_file lazy -# Convert a $build file to $host form and store it in $file -# Currently only supports Windows hosts. If the determined conversion -# type is listed in (the comma separated) LAZY, no conversion will -# take place. -func_file_conv () -{ - file=$1 - case $file in - / | /[!/]*) # absolute file, and not a UNC file - if test -z "$file_conv"; then - # lazily determine how to convert abs files - case `uname -s` in - MINGW*) - file_conv=mingw - ;; - CYGWIN*) - file_conv=cygwin - ;; - *) - file_conv=wine - ;; - esac - fi - case $file_conv/,$2, in - *,$file_conv,*) - ;; - mingw/*) - file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` - ;; - cygwin/*) - file=`cygpath -m "$file" || echo "$file"` - ;; - wine/*) - file=`winepath -w "$file" || echo "$file"` - ;; - esac - ;; - esac -} - -# func_cl_dashL linkdir -# Make cl look for libraries in LINKDIR -func_cl_dashL () -{ - func_file_conv "$1" - if test -z "$lib_path"; then - lib_path=$file - else - lib_path="$lib_path;$file" - fi - linker_opts="$linker_opts -LIBPATH:$file" -} - -# func_cl_dashl library -# Do a library search-path lookup for cl -func_cl_dashl () -{ - lib=$1 - found=no - save_IFS=$IFS - IFS=';' - for dir in $lib_path $LIB - do - IFS=$save_IFS - if $shared && test -f "$dir/$lib.dll.lib"; then - found=yes - lib=$dir/$lib.dll.lib - break - fi - if test -f "$dir/$lib.lib"; then - found=yes - lib=$dir/$lib.lib - break - fi - if test -f "$dir/lib$lib.a"; then - found=yes - lib=$dir/lib$lib.a - break - fi - done - IFS=$save_IFS - - if test "$found" != yes; then - lib=$lib.lib - fi -} - -# func_cl_wrapper cl arg... -# Adjust compile command to suit cl -func_cl_wrapper () -{ - # Assume a capable shell - lib_path= - shared=: - linker_opts= - for arg - do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - eat=1 - case $2 in - *.o | *.[oO][bB][jJ]) - func_file_conv "$2" - set x "$@" -Fo"$file" - shift - ;; - *) - func_file_conv "$2" - set x "$@" -Fe"$file" - shift - ;; - esac - ;; - -I) - eat=1 - func_file_conv "$2" mingw - set x "$@" -I"$file" - shift - ;; - -I*) - func_file_conv "${1#-I}" mingw - set x "$@" -I"$file" - shift - ;; - -l) - eat=1 - func_cl_dashl "$2" - set x "$@" "$lib" - shift - ;; - -l*) - func_cl_dashl "${1#-l}" - set x "$@" "$lib" - shift - ;; - -L) - eat=1 - func_cl_dashL "$2" - ;; - -L*) - func_cl_dashL "${1#-L}" - ;; - -static) - shared=false - ;; - -Wl,*) - arg=${1#-Wl,} - save_ifs="$IFS"; IFS=',' - for flag in $arg; do - IFS="$save_ifs" - linker_opts="$linker_opts $flag" - done - IFS="$save_ifs" - ;; - -Xlinker) - eat=1 - linker_opts="$linker_opts $2" - ;; - -*) - set x "$@" "$1" - shift - ;; - *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) - func_file_conv "$1" - set x "$@" -Tp"$file" - shift - ;; - *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) - func_file_conv "$1" mingw - set x "$@" "$file" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift - done - if test -n "$linker_opts"; then - linker_opts="-link$linker_opts" - fi - exec "$@" $linker_opts - exit 1 -} - -eat= - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: compile [--help] [--version] PROGRAM [ARGS] - -Wrapper for compilers which do not understand '-c -o'. -Remove '-o dest.o' from ARGS, run PROGRAM with the remaining -arguments, and rename the output as expected. - -If you are trying to build a whole package this is not the -right script to run: please start by reading the file 'INSTALL'. - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "compile $scriptversion" - exit $? - ;; - cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) - func_cl_wrapper "$@" # Doesn't return... - ;; -esac - -ofile= -cfile= - -for arg -do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - # So we strip '-o arg' only if arg is an object. - eat=1 - case $2 in - *.o | *.obj) - ofile=$2 - ;; - *) - set x "$@" -o "$2" - shift - ;; - esac - ;; - *.c) - cfile=$1 - set x "$@" "$1" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift -done - -if test -z "$ofile" || test -z "$cfile"; then - # If no '-o' option was seen then we might have been invoked from a - # pattern rule where we don't need one. That is ok -- this is a - # normal compilation that the losing compiler can handle. If no - # '.c' file was seen then we are probably linking. That is also - # ok. - exec "$@" -fi - -# Name of file we expect compiler to create. -cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` - -# Create the lock directory. -# Note: use '[/\\:.-]' here to ensure that we don't use the same name -# that we are using for the .o file. Also, base the name on the expected -# object file name, since that is what matters with a parallel build. -lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d -while true; do - if mkdir "$lockdir" >/dev/null 2>&1; then - break - fi - sleep 1 -done -# FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir '$lockdir'; exit 1" 1 2 15 - -# Run the compile. -"$@" -ret=$? - -if test -f "$cofile"; then - test "$cofile" = "$ofile" || mv "$cofile" "$ofile" -elif test -f "${cofile}bj"; then - test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" -fi - -rmdir "$lockdir" -exit $ret - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru tilda-1.5.2/build-aux/config.guess tilda-1.5.4/build-aux/config.guess --- tilda-1.5.2/build-aux/config.guess 2018-02-24 16:00:57.000000000 +0000 +++ tilda-1.5.4/build-aux/config.guess 1970-01-01 00:00:00.000000000 +0000 @@ -1,1480 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright 1992-2018 Free Software Foundation, Inc. - -timestamp='2018-02-24' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see . -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). -# -# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. -# -# You can get the latest version of this script from: -# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess -# -# Please send patches to . - - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Options: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright 1992-2018 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > "$dummy.c" ; - for c in cc gcc c89 c99 ; do - if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -case "$UNAME_SYSTEM" in -Linux|GNU|GNU/*) - # If the system lacks a compiler, then just pick glibc. - # We could probably try harder. - LIBC=gnu - - eval "$set_cc_for_build" - cat <<-EOF > "$dummy.c" - #include - #if defined(__UCLIBC__) - LIBC=uclibc - #elif defined(__dietlibc__) - LIBC=dietlibc - #else - LIBC=gnu - #endif - EOF - eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" - - # If ldd exists, use it to detect musl libc. - if command -v ldd >/dev/null && \ - ldd --version 2>&1 | grep -q ^musl - then - LIBC=musl - fi - ;; -esac - -# Note: order is significant - the case branches are not exclusive. - -case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ - "/sbin/$sysctl" 2>/dev/null || \ - "/usr/sbin/$sysctl" 2>/dev/null || \ - echo unknown)` - case "$UNAME_MACHINE_ARCH" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - earmv*) - arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` - endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` - machine="${arch}${endian}"-unknown - ;; - *) machine="$UNAME_MACHINE_ARCH"-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently (or will in the future) and ABI. - case "$UNAME_MACHINE_ARCH" in - earm*) - os=netbsdelf - ;; - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval "$set_cc_for_build" - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # Determine ABI tags. - case "$UNAME_MACHINE_ARCH" in - earm*) - expr='s/^earmv[0-9]/-eabi/;s/eb$//' - abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "$UNAME_VERSION" in - Debian*) - release='-gnu' - ;; - *) - release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "$machine-${os}${release}${abi}" - exit ;; - *:Bitrig:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE" - exit ;; - *:LibertyBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE" - exit ;; - *:MidnightBSD:*:*) - echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE" - exit ;; - *:ekkoBSD:*:*) - echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE" - exit ;; - *:SolidBSD:*:*) - echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE" - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd"$UNAME_RELEASE" - exit ;; - *:MirBSD:*:*) - echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE" - exit ;; - *:Sortix:*:*) - echo "$UNAME_MACHINE"-unknown-sortix - exit ;; - *:Redox:*:*) - echo "$UNAME_MACHINE"-unknown-redox - exit ;; - mips:OSF1:*.*) - echo mips-dec-osf1 - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE=alpha ;; - "EV4.5 (21064)") - UNAME_MACHINE=alpha ;; - "LCA4 (21066/21068)") - UNAME_MACHINE=alpha ;; - "EV5 (21164)") - UNAME_MACHINE=alphaev5 ;; - "EV5.6 (21164A)") - UNAME_MACHINE=alphaev56 ;; - "EV5.6 (21164PC)") - UNAME_MACHINE=alphapca56 ;; - "EV5.7 (21164PC)") - UNAME_MACHINE=alphapca57 ;; - "EV6 (21264)") - UNAME_MACHINE=alphaev6 ;; - "EV6.7 (21264A)") - UNAME_MACHINE=alphaev67 ;; - "EV6.8CB (21264C)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8AL (21264B)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8CX (21264D)") - UNAME_MACHINE=alphaev68 ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE=alphaev69 ;; - "EV7 (21364)") - UNAME_MACHINE=alphaev7 ;; - "EV7.9 (21364A)") - UNAME_MACHINE=alphaev79 ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" - # Reset EXIT trap before exiting to avoid spurious non-zero exit code. - exitcode=$? - trap '' 0 - exit $exitcode ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo "$UNAME_MACHINE"-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo "$UNAME_MACHINE"-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix"$UNAME_RELEASE" - exit ;; - arm*:riscos:*:*|arm*:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" - exit ;; - i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux"$UNAME_RELEASE" - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - eval "$set_cc_for_build" - SUN_ARCH=i386 - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH=x86_64 - fi - fi - echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos"$UNAME_RELEASE" - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos"$UNAME_RELEASE" - ;; - sun4) - echo sparc-sun-sunos"$UNAME_RELEASE" - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos"$UNAME_RELEASE" - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint"$UNAME_RELEASE" - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint"$UNAME_RELEASE" - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint"$UNAME_RELEASE" - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten"$UNAME_RELEASE" - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten"$UNAME_RELEASE" - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix"$UNAME_RELEASE" - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix"$UNAME_RELEASE" - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix"$UNAME_RELEASE" - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval "$set_cc_for_build" - sed 's/^ //' << EOF > "$dummy.c" -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o "$dummy" "$dummy.c" && - dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`"$dummy" "$dummyarg"` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos"$UNAME_RELEASE" - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] - then - if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ - [ "$TARGET_BINARY_INTERFACE"x = x ] - then - echo m88k-dg-dgux"$UNAME_RELEASE" - else - echo m88k-dg-dguxbcs"$UNAME_RELEASE" - fi - else - echo i586-dg-dgux"$UNAME_RELEASE" - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" - fi - echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV" - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval "$set_cc_for_build" - sed 's/^ //' << EOF > "$dummy.c" - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[4567]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/lslpp ] ; then - IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | - awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` - else - IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" - fi - echo "$IBM_ARCH"-ibm-aix"$IBM_REV" - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` - case "$UNAME_MACHINE" in - 9000/31?) HP_ARCH=m68000 ;; - 9000/[34]??) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "$sc_cpu_version" in - 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 - 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "$sc_kernel_bits" in - 32) HP_ARCH=hppa2.0n ;; - 64) HP_ARCH=hppa2.0w ;; - '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "$HP_ARCH" = "" ]; then - eval "$set_cc_for_build" - sed 's/^ //' << EOF > "$dummy.c" - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ "$HP_ARCH" = hppa2.0w ] - then - eval "$set_cc_for_build" - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | - grep -q __LP64__ - then - HP_ARCH=hppa2.0w - else - HP_ARCH=hppa64 - fi - fi - echo "$HP_ARCH"-hp-hpux"$HPUX_REV" - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux"$HPUX_REV" - exit ;; - 3050*:HI-UX:*:*) - eval "$set_cc_for_build" - sed 's/^ //' << EOF > "$dummy.c" - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo "$UNAME_MACHINE"-unknown-osf1mk - else - echo "$UNAME_MACHINE"-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE" - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi"$UNAME_RELEASE" - exit ;; - *:BSD/OS:*:*) - echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE" - exit ;; - *:FreeBSD:*:*) - UNAME_PROCESSOR=`/usr/bin/uname -p` - case "$UNAME_PROCESSOR" in - amd64) - UNAME_PROCESSOR=x86_64 ;; - i386) - UNAME_PROCESSOR=i586 ;; - esac - echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" - exit ;; - i*:CYGWIN*:*) - echo "$UNAME_MACHINE"-pc-cygwin - exit ;; - *:MINGW64*:*) - echo "$UNAME_MACHINE"-pc-mingw64 - exit ;; - *:MINGW*:*) - echo "$UNAME_MACHINE"-pc-mingw32 - exit ;; - *:MSYS*:*) - echo "$UNAME_MACHINE"-pc-msys - exit ;; - i*:PW*:*) - echo "$UNAME_MACHINE"-pc-pw32 - exit ;; - *:Interix*:*) - case "$UNAME_MACHINE" in - x86) - echo i586-pc-interix"$UNAME_RELEASE" - exit ;; - authenticamd | genuineintel | EM64T) - echo x86_64-unknown-interix"$UNAME_RELEASE" - exit ;; - IA64) - echo ia64-unknown-interix"$UNAME_RELEASE" - exit ;; - esac ;; - i*:UWIN*:*) - echo "$UNAME_MACHINE"-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - *:GNU:*:*) - # the GNU system - echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" - exit ;; - i*86:Minix:*:*) - echo "$UNAME_MACHINE"-pc-minix - exit ;; - aarch64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - aarch64_be:Linux:*:*) - UNAME_MACHINE=aarch64_be - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC=gnulibc1 ; fi - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - arc:Linux:*:* | arceb:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - arm*:Linux:*:*) - eval "$set_cc_for_build" - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - else - if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_PCS_VFP - then - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi - else - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf - fi - fi - exit ;; - avr32*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - cris:Linux:*:*) - echo "$UNAME_MACHINE"-axis-linux-"$LIBC" - exit ;; - crisv32:Linux:*:*) - echo "$UNAME_MACHINE"-axis-linux-"$LIBC" - exit ;; - e2k:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - frv:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - hexagon:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - i*86:Linux:*:*) - echo "$UNAME_MACHINE"-pc-linux-"$LIBC" - exit ;; - ia64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - k1om:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - m32r*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - m68*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - mips:Linux:*:* | mips64:Linux:*:*) - eval "$set_cc_for_build" - sed 's/^ //' << EOF > "$dummy.c" - #undef CPU - #undef ${UNAME_MACHINE} - #undef ${UNAME_MACHINE}el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=${UNAME_MACHINE}el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=${UNAME_MACHINE} - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`" - test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; } - ;; - mips64el:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - openrisc*:Linux:*:*) - echo or1k-unknown-linux-"$LIBC" - exit ;; - or32:Linux:*:* | or1k*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-"$LIBC" - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-"$LIBC" - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;; - PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;; - *) echo hppa-unknown-linux-"$LIBC" ;; - esac - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-"$LIBC" - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-"$LIBC" - exit ;; - ppc64le:Linux:*:*) - echo powerpc64le-unknown-linux-"$LIBC" - exit ;; - ppcle:Linux:*:*) - echo powerpcle-unknown-linux-"$LIBC" - exit ;; - riscv32:Linux:*:* | riscv64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo "$UNAME_MACHINE"-ibm-linux-"$LIBC" - exit ;; - sh64*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - sh*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - tile*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - vax:Linux:*:*) - echo "$UNAME_MACHINE"-dec-linux-"$LIBC" - exit ;; - x86_64:Linux:*:*) - if objdump -f /bin/sh | grep -q elf32-x86-64; then - echo "$UNAME_MACHINE"-pc-linux-"$LIBC"x32 - else - echo "$UNAME_MACHINE"-pc-linux-"$LIBC" - fi - exit ;; - xtensa*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION" - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo "$UNAME_MACHINE"-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo "$UNAME_MACHINE"-unknown-stop - exit ;; - i*86:atheos:*:*) - echo "$UNAME_MACHINE"-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo "$UNAME_MACHINE"-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos"$UNAME_RELEASE" - exit ;; - i*86:*DOS:*:*) - echo "$UNAME_MACHINE"-pc-msdosdjgpp - exit ;; - i*86:*:4.*:*) - UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL" - else - echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL" - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}{$UNAME_VERSION}" - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL" - else - echo "$UNAME_MACHINE"-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configure will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos"$UNAME_RELEASE" - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos"$UNAME_RELEASE" - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos"$UNAME_RELEASE" - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos"$UNAME_RELEASE" - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv"$UNAME_RELEASE" - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo "$UNAME_MACHINE"-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo "$UNAME_MACHINE"-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux"$UNAME_RELEASE" - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv"$UNAME_RELEASE" - else - echo mips-unknown-sysv"$UNAME_RELEASE" - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - x86_64:Haiku:*:*) - echo x86_64-unknown-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux"$UNAME_RELEASE" - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux"$UNAME_RELEASE" - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux"$UNAME_RELEASE" - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux"$UNAME_RELEASE" - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux"$UNAME_RELEASE" - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux"$UNAME_RELEASE" - exit ;; - SX-ACE:SUPER-UX:*:*) - echo sxace-nec-superux"$UNAME_RELEASE" - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody"$UNAME_RELEASE" - exit ;; - *:Rhapsody:*:*) - echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - eval "$set_cc_for_build" - if test "$UNAME_PROCESSOR" = unknown ; then - UNAME_PROCESSOR=powerpc - fi - if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - case $UNAME_PROCESSOR in - i386) UNAME_PROCESSOR=x86_64 ;; - powerpc) UNAME_PROCESSOR=powerpc64 ;; - esac - fi - # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc - if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_PPC >/dev/null - then - UNAME_PROCESSOR=powerpc - fi - fi - elif test "$UNAME_PROCESSOR" = i386 ; then - # Avoid executing cc on OS X 10.9, as it ships with a stub - # that puts up a graphical alert prompting to install - # developer tools. Any system running Mac OS X 10.7 or - # later (Darwin 11 and later) is required to have a 64-bit - # processor. This is not true of the ARM version of Darwin - # that Apple uses in portable devices. - UNAME_PROCESSOR=x86_64 - fi - echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE" - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = x86; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE" - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NEO-*:NONSTOP_KERNEL:*:*) - echo neo-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSE-*:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSR-*:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSV-*:NONSTOP_KERNEL:*:*) - echo nsv-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSX-*:NONSTOP_KERNEL:*:*) - echo nsx-tandem-nsk"$UNAME_RELEASE" - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE" - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = 386; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo "$UNAME_MACHINE"-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux"$UNAME_RELEASE" - exit ;; - *:DragonFly:*:*) - echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "$UNAME_MACHINE" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" - exit ;; - i*86:rdos:*:*) - echo "$UNAME_MACHINE"-pc-rdos - exit ;; - i*86:AROS:*:*) - echo "$UNAME_MACHINE"-pc-aros - exit ;; - x86_64:VMkernel:*:*) - echo "$UNAME_MACHINE"-unknown-esx - exit ;; - amd64:Isilon\ OneFS:*:*) - echo x86_64-unknown-onefs - exit ;; -esac - -echo "$0: unable to guess system type" >&2 - -case "$UNAME_MACHINE:$UNAME_SYSTEM" in - mips:Linux | mips64:Linux) - # If we got here on MIPS GNU/Linux, output extra information. - cat >&2 <&2 </dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = "$UNAME_MACHINE" -UNAME_RELEASE = "$UNAME_RELEASE" -UNAME_SYSTEM = "$UNAME_SYSTEM" -UNAME_VERSION = "$UNAME_VERSION" -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-functions 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff -Nru tilda-1.5.2/build-aux/config.rpath tilda-1.5.4/build-aux/config.rpath --- tilda-1.5.2/build-aux/config.rpath 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/build-aux/config.rpath 1970-01-01 00:00:00.000000000 +0000 @@ -1,672 +0,0 @@ -#! /bin/sh -# Output a system dependent set of variables, describing how to set the -# run time search path of shared libraries in an executable. -# -# Copyright 1996-2010 Free Software Foundation, Inc. -# Taken from GNU libtool, 2001 -# Originally by Gordon Matzigkeit , 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. -# -# The first argument passed to this file is the canonical host specification, -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld -# should be set by the caller. -# -# The set of defined variables is at the end of this script. - -# Known limitations: -# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer -# than 256 bytes, otherwise the compiler driver will dump core. The only -# known workaround is to choose shorter directory names for the build -# directory and/or the installation directory. - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -shrext=.so - -host="$1" -host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - -# Code taken from libtool.m4's _LT_CC_BASENAME. - -for cc_temp in $CC""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` - -# Code taken from libtool.m4's _LT_COMPILER_PIC. - -wl= -if test "$GCC" = yes; then - wl='-Wl,' -else - case "$host_os" in - aix*) - wl='-Wl,' - ;; - darwin*) - case $cc_basename in - xlc*) - wl='-Wl,' - ;; - esac - ;; - mingw* | cygwin* | pw32* | os2* | cegcc*) - ;; - hpux9* | hpux10* | hpux11*) - wl='-Wl,' - ;; - irix5* | irix6* | nonstopux*) - wl='-Wl,' - ;; - newsos6) - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - ecc*) - wl='-Wl,' - ;; - icc* | ifort*) - wl='-Wl,' - ;; - lf95*) - wl='-Wl,' - ;; - pgcc | pgf77 | pgf90) - wl='-Wl,' - ;; - ccc*) - wl='-Wl,' - ;; - como) - wl='-lopt=' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - wl='-Wl,' - ;; - esac - ;; - esac - ;; - osf3* | osf4* | osf5*) - wl='-Wl,' - ;; - rdos*) - ;; - solaris*) - wl='-Wl,' - ;; - sunos4*) - wl='-Qoption ld ' - ;; - sysv4 | sysv4.2uw2* | sysv4.3*) - wl='-Wl,' - ;; - sysv4*MP*) - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - wl='-Wl,' - ;; - unicos*) - wl='-Wl,' - ;; - uts4*) - ;; - esac -fi - -# Code taken from libtool.m4's _LT_LINKER_SHLIBS. - -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no - -case "$host_os" in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - # Unlike libtool, we use -rpath here, not --rpath, since the documented - # option of GNU ld is called -rpath, not --rpath. - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - case "$host_os" in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - fi - ;; - amigaos*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we cannot use - # them. - ld_shlibs=no - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - cygwin* | mingw* | pw32* | cegcc*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - interix[3-9]*) - hardcode_direct=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - netbsd*) - ;; - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - else - ld_shlibs=no - fi - ;; - esac - ;; - sunos4*) - hardcode_direct=yes - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - esac - if test "$ld_shlibs" = no; then - hardcode_libdir_flag_spec= - fi -else - case "$host_os" in - aix3*) - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - else - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - fi - hardcode_direct=yes - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - fi - # Begin _LT_AC_SYS_LIBPATH_AIX. - echo 'int main () { return 0; }' > conftest.c - ${CC} ${LDFLAGS} conftest.c -o conftest - aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - fi - if test -z "$aix_libpath"; then - aix_libpath="/usr/lib:/lib" - fi - rm -f conftest.c conftest - # End _LT_AC_SYS_LIBPATH_AIX. - if test "$aix_use_runtimelinking" = yes; then - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - else - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - fi - fi - ;; - amigaos*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - bsdi[45]*) - ;; - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - libext=lib - ;; - darwin* | rhapsody*) - hardcode_direct=no - if test "$GCC" = yes ; then - : - else - case $cc_basename in - xlc*) - ;; - *) - ld_shlibs=no - ;; - esac - fi - ;; - dgux*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - freebsd1*) - ld_shlibs=no - ;; - freebsd2.2*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - freebsd2*) - hardcode_direct=yes - hardcode_minus_L=yes - ;; - freebsd* | dragonfly*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - hpux9*) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - hpux10*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - hpux11*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - ;; - *) - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - netbsd*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - newsos6) - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - osf3*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - osf4* | osf5*) - if test "$GCC" = yes; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - # Both cc and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - solaris*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - sunos4*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - ;; - sysv4) - case $host_vendor in - sni) - hardcode_direct=yes # is this really true??? - ;; - siemens) - hardcode_direct=no - ;; - motorola) - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - ;; - sysv4.3*) - ;; - sysv4*MP*) - if test -d /usr/nec; then - ld_shlibs=yes - fi - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - ;; - sysv5* | sco3.2v5* | sco5v6*) - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator=':' - ;; - uts4*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - *) - ld_shlibs=no - ;; - esac -fi - -# Check dynamic linker characteristics -# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. -# Unlike libtool.m4, here we don't care about _all_ names of the library, but -# only about the one the linker finds when passed -lNAME. This is the last -# element of library_names_spec in libtool.m4, or possibly two of them if the -# linker has special search rules. -library_names_spec= # the last element of library_names_spec in libtool.m4 -libname_spec='lib$name' -case "$host_os" in - aix3*) - library_names_spec='$libname.a' - ;; - aix[4-9]*) - library_names_spec='$libname$shrext' - ;; - amigaos*) - library_names_spec='$libname.a' - ;; - beos*) - library_names_spec='$libname$shrext' - ;; - bsdi[45]*) - library_names_spec='$libname$shrext' - ;; - cygwin* | mingw* | pw32* | cegcc*) - shrext=.dll - library_names_spec='$libname.dll.a $libname.lib' - ;; - darwin* | rhapsody*) - shrext=.dylib - library_names_spec='$libname$shrext' - ;; - dgux*) - library_names_spec='$libname$shrext' - ;; - freebsd1*) - ;; - freebsd* | dragonfly*) - case "$host_os" in - freebsd[123]*) - library_names_spec='$libname$shrext$versuffix' ;; - *) - library_names_spec='$libname$shrext' ;; - esac - ;; - gnu*) - library_names_spec='$libname$shrext' - ;; - hpux9* | hpux10* | hpux11*) - case $host_cpu in - ia64*) - shrext=.so - ;; - hppa*64*) - shrext=.sl - ;; - *) - shrext=.sl - ;; - esac - library_names_spec='$libname$shrext' - ;; - interix[3-9]*) - library_names_spec='$libname$shrext' - ;; - irix5* | irix6* | nonstopux*) - library_names_spec='$libname$shrext' - case "$host_os" in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; - *) libsuff= shlibsuff= ;; - esac - ;; - esac - ;; - linux*oldld* | linux*aout* | linux*coff*) - ;; - linux* | k*bsd*-gnu) - library_names_spec='$libname$shrext' - ;; - knetbsd*-gnu) - library_names_spec='$libname$shrext' - ;; - netbsd*) - library_names_spec='$libname$shrext' - ;; - newsos6) - library_names_spec='$libname$shrext' - ;; - nto-qnx*) - library_names_spec='$libname$shrext' - ;; - openbsd*) - library_names_spec='$libname$shrext$versuffix' - ;; - os2*) - libname_spec='$name' - shrext=.dll - library_names_spec='$libname.a' - ;; - osf3* | osf4* | osf5*) - library_names_spec='$libname$shrext' - ;; - rdos*) - ;; - solaris*) - library_names_spec='$libname$shrext' - ;; - sunos4*) - library_names_spec='$libname$shrext$versuffix' - ;; - sysv4 | sysv4.3*) - library_names_spec='$libname$shrext' - ;; - sysv4*MP*) - library_names_spec='$libname$shrext' - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - library_names_spec='$libname$shrext' - ;; - uts4*) - library_names_spec='$libname$shrext' - ;; -esac - -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` -shlibext=`echo "$shrext" | sed -e 's,^\.,,'` -escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` - -LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). - - -# Please send patches to . -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# You can get the latest version of this script from: -# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS - -Canonicalize a configuration name. - -Options: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright 1992-2018 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo "$1" - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ - linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ - knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ - kopensolaris*-gnu* | cloudabi*-eabi* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - android-linux) - os=-linux-android - basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown - ;; - *) - basic_machine=`echo "$1" | sed 's/-[^-]*$//'` - if [ "$basic_machine" != "$1" ] - then os=`echo "$1" | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray | -microblaze*) - os= - basic_machine=$1 - ;; - -bluegene*) - os=-cnk - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*178) - os=-lynxos178 - ;; - -lynx*5) - os=-lynxos5 - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | aarch64 | aarch64_be \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arceb \ - | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ - | avr | avr32 \ - | ba \ - | be32 | be64 \ - | bfin \ - | c4x | c8051 | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | e2k | epiphany \ - | fido | fr30 | frv | ft32 \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | hexagon \ - | i370 | i860 | i960 | ia16 | ia64 \ - | ip2k | iq2000 \ - | k1om \ - | le32 | le64 \ - | lm32 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64octeon | mips64octeonel \ - | mips64orion | mips64orionel \ - | mips64r5900 | mips64r5900el \ - | mips64vr | mips64vrel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa32r6 | mipsisa32r6el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64r6 | mipsisa64r6el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipsr5900 | mipsr5900el \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | moxie \ - | mt \ - | msp430 \ - | nds32 | nds32le | nds32be \ - | nios | nios2 | nios2eb | nios2el \ - | ns16k | ns32k \ - | open8 | or1k | or1knd | or32 \ - | pdp10 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle \ - | pru \ - | pyramid \ - | riscv32 | riscv64 \ - | rl78 | rx \ - | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu \ - | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ - | ubicom32 \ - | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ - | visium \ - | wasm32 \ - | x86 | xc16x | xstormy16 | xtensa \ - | z8k | z80) - basic_machine=$basic_machine-unknown - ;; - c54x) - basic_machine=tic54x-unknown - ;; - c55x) - basic_machine=tic55x-unknown - ;; - c6x) - basic_machine=tic6x-unknown - ;; - leon|leon[3-9]) - basic_machine=sparc-$basic_machine - ;; - m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65) - ;; - ms1) - basic_machine=mt-unknown - ;; - - strongarm | thumb | xscale) - basic_machine=arm-unknown - ;; - xgate) - basic_machine=$basic_machine-unknown - os=-none - ;; - xscaleeb) - basic_machine=armeb-unknown - ;; - - xscaleel) - basic_machine=armel-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | aarch64-* | aarch64_be-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | ba-* \ - | be32-* | be64-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* \ - | c8051-* | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | e2k-* | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | hexagon-* \ - | i*86-* | i860-* | i960-* | ia16-* | ia64-* \ - | ip2k-* | iq2000-* \ - | k1om-* \ - | le32-* | le64-* \ - | lm32-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ - | microblaze-* | microblazeel-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64octeon-* | mips64octeonel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64r5900-* | mips64r5900el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa32r6-* | mipsisa32r6el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64r6-* | mipsisa64r6el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipsr5900-* | mipsr5900el-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nds32-* | nds32le-* | nds32be-* \ - | nios-* | nios2-* | nios2eb-* | nios2el-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | open8-* \ - | or1k*-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ - | pru-* \ - | pyramid-* \ - | riscv32-* | riscv64-* \ - | rl78-* | romp-* | rs6000-* | rx-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ - | tahoe-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tile*-* \ - | tron-* \ - | ubicom32-* \ - | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ - | vax-* \ - | visium-* \ - | wasm32-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-* | z80-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-pc - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aros) - basic_machine=i386-pc - os=-aros - ;; - asmjs) - basic_machine=asmjs-unknown - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'` - os=-linux - ;; - bluegene*) - basic_machine=powerpc-ibm - os=-cnk - ;; - c54x-*) - basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - c55x-*) - basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - c6x-*) - basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - cegcc) - basic_machine=arm-unknown - os=-cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16 | cr16-*) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dicos) - basic_machine=i686-pc - os=-dicos - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2*) - basic_machine=m68k-bull - os=-sysv3 - ;; - e500v[12]) - basic_machine=powerpc-unknown - os=$os"spe" - ;; - e500v[12]-*) - basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` - os=$os"spe" - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; - i*86v32) - basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - leon-*|leon[3-9]-*) - basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'` - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'` - os=-linux - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - microblaze*) - basic_machine=microblaze-xilinx - ;; - mingw64) - basic_machine=x86_64-pc - os=-mingw64 - ;; - mingw32) - basic_machine=i686-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - moxiebox) - basic_machine=moxie-unknown - os=-moxiebox - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'` - ;; - msys) - basic_machine=i686-pc - os=-msys - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - nacl) - basic_machine=le32-unknown - os=-nacl - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - neo-tandem) - basic_machine=neo-tandem - ;; - nse-tandem) - basic_machine=nse-tandem - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - nsv-tandem) - basic_machine=nsv-tandem - ;; - nsx-tandem) - basic_machine=nsx-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc | ppcbe) basic_machine=powerpc-unknown - ;; - ppc-* | ppcbe-*) - basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos | rdos64) - basic_machine=x86_64-pc - os=-rdos - ;; - rdos32) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - strongarm-* | thumb-*) - basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tile*) - basic_machine=$basic_machine-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - x64) - basic_machine=x86_64-pc - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - xscale-* | xscalee[bl]-*) - basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'` - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases that might get confused - # with valid system types. - # -solaris* is a basic system type, with this one exception. - -auroraux) - os=-auroraux - ;; - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # es1800 is here to avoid being matched by es* (a different OS) - -es1800*) - os=-ose - ;; - # Now accept the basic system types. - # The portable systems comes first. - # Each alternative MUST end in a * to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ - | -sym* | -kopensolaris* | -plan9* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* | -cloudabi* | -sortix* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \ - | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \ - | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ - | -linux-newlib* | -linux-musl* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ - | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \ - | -midnightbsd*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -xray | -os68k* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo "$os" | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo "$os" | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo "$os" | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4*) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -zvmoe) - os=-zvmoe - ;; - -dicos*) - os=-dicos - ;; - -pikeos*) - # Until real need of OS specific support for - # particular features comes up, bare metal - # configurations are quite functional. - case $basic_machine in - arm*) - os=-eabi - ;; - *) - os=-elf - ;; - esac - ;; - -nacl*) - ;; - -ios) - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - c8051-*) - os=-elf - ;; - hexagon-*) - os=-elf - ;; - tic54x-*) - os=-coff - ;; - tic55x-*) - os=-coff - ;; - tic6x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - pru-*) - os=-elf - ;; - *-be) - os=-beos - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -cnk*|-aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"` - ;; -esac - -echo "$basic_machine$os" -exit - -# Local variables: -# eval: (add-hook 'write-file-functions 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff -Nru tilda-1.5.2/build-aux/depcomp tilda-1.5.4/build-aux/depcomp --- tilda-1.5.2/build-aux/depcomp 2018-03-25 23:44:27.000000000 +0000 +++ tilda-1.5.4/build-aux/depcomp 1970-01-01 00:00:00.000000000 +0000 @@ -1,791 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2016-01-11.22; # UTC - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva . - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by 'PROGRAMS ARGS'. - object Object file output by 'PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputting dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -# Get the directory component of the given path, and save it in the -# global variables '$dir'. Note that this directory component will -# be either empty or ending with a '/' character. This is deliberate. -set_dir_from () -{ - case $1 in - */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; - *) dir=;; - esac -} - -# Get the suffix-stripped basename of the given path, and save it the -# global variable '$base'. -set_base_from () -{ - base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` -} - -# If no dependency file was actually created by the compiler invocation, -# we still have to create a dummy depfile, to avoid errors with the -# Makefile "include basename.Plo" scheme. -make_dummy_depfile () -{ - echo "#dummy" > "$depfile" -} - -# Factor out some common post-processing of the generated depfile. -# Requires the auxiliary global variable '$tmpdepfile' to be set. -aix_post_process_depfile () -{ - # If the compiler actually managed to produce a dependency file, - # post-process it. - if test -f "$tmpdepfile"; then - # Each line is of the form 'foo.o: dependency.h'. - # Do two passes, one to just change these to - # $object: dependency.h - # and one to simply output - # dependency.h: - # which is needed to avoid the deleted-header problem. - { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" - sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" - } > "$depfile" - rm -f "$tmpdepfile" - else - make_dummy_depfile - fi -} - -# A tabulation character. -tab=' ' -# A newline character. -nl=' -' -# Character ranges might be problematic outside the C locale. -# These definitions help. -upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ -lower=abcdefghijklmnopqrstuvwxyz -digits=0123456789 -alpha=${upper}${lower} - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Avoid interferences from the environment. -gccflag= dashmflag= - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -cygpath_u="cygpath -u -f -" -if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvisualcpp -fi - -if test "$depmode" = msvc7msys; then - # This is just like msvc7 but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvc7 -fi - -if test "$depmode" = xlc; then - # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. - gccflag=-qmakedep=gcc,-MF - depmode=gcc -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. -## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. -## (see the conditional assignment to $gccflag above). -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). Also, it might not be -## supported by the other compilers which use the 'gcc' depmode. -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The second -e expression handles DOS-style file names with drive - # letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the "deleted header file" problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. -## Some versions of gcc put a space before the ':'. On the theory -## that the space means something, we add a space to the output as -## well. hp depmode also adds that space, but also prefixes the VPATH -## to the object. Take care to not repeat it in the output. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like '#:fec' to the end of the - # dependency line. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ - | tr "$nl" ' ' >> "$depfile" - echo >> "$depfile" - # The second pass generates a dummy entry for each header file. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" - else - make_dummy_depfile - fi - rm -f "$tmpdepfile" - ;; - -xlc) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts '$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - set_dir_from "$object" - set_base_from "$object" - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.u - tmpdepfile2=$base.u - tmpdepfile3=$dir.libs/$base.u - "$@" -Wc,-M - else - tmpdepfile1=$dir$base.u - tmpdepfile2=$dir$base.u - tmpdepfile3=$dir$base.u - "$@" -M - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - aix_post_process_depfile - ;; - -tcc) - # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 - # FIXME: That version still under development at the moment of writing. - # Make that this statement remains true also for stable, released - # versions. - # It will wrap lines (doesn't matter whether long or short) with a - # trailing '\', as in: - # - # foo.o : \ - # foo.c \ - # foo.h \ - # - # It will put a trailing '\' even on the last line, and will use leading - # spaces rather than leading tabs (at least since its commit 0394caf7 - # "Emit spaces for -MD"). - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. - # We have to change lines of the first kind to '$object: \'. - sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" - # And for each line of the second kind, we have to emit a 'dep.h:' - # dummy dependency, to avoid the deleted-header problem. - sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" - rm -f "$tmpdepfile" - ;; - -## The order of this option in the case statement is important, since the -## shell code in configure will try each of these formats in the order -## listed in this file. A plain '-MD' option would be understood by many -## compilers, so we must ensure this comes after the gcc and icc options. -pgcc) - # Portland's C compiler understands '-MD'. - # Will always output deps to 'file.d' where file is the root name of the - # source file under compilation, even if file resides in a subdirectory. - # The object file name does not affect the name of the '.d' file. - # pgcc 10.2 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using '\' : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - set_dir_from "$object" - # Use the source, not the object, to determine the base name, since - # that's sadly what pgcc will do too. - set_base_from "$source" - tmpdepfile=$base.d - - # For projects that build the same source file twice into different object - # files, the pgcc approach of using the *source* file root name can cause - # problems in parallel builds. Use a locking strategy to avoid stomping on - # the same $tmpdepfile. - lockdir=$base.d-lock - trap " - echo '$0: caught signal, cleaning up...' >&2 - rmdir '$lockdir' - exit 1 - " 1 2 13 15 - numtries=100 - i=$numtries - while test $i -gt 0; do - # mkdir is a portable test-and-set. - if mkdir "$lockdir" 2>/dev/null; then - # This process acquired the lock. - "$@" -MD - stat=$? - # Release the lock. - rmdir "$lockdir" - break - else - # If the lock is being held by a different process, wait - # until the winning process is done or we timeout. - while test -d "$lockdir" && test $i -gt 0; do - sleep 1 - i=`expr $i - 1` - done - fi - i=`expr $i - 1` - done - trap - 1 2 13 15 - if test $i -le 0; then - echo "$0: failed to acquire lock after $numtries attempts" >&2 - echo "$0: check lockdir '$lockdir'" >&2 - exit 1 - fi - - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - set_dir_from "$object" - set_base_from "$object" - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" - # Add 'dependent.h:' lines. - sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" - else - make_dummy_depfile - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in 'foo.d' instead, so we check for that too. - # Subdirectories are respected. - set_dir_from "$object" - set_base_from "$object" - - if test "$libtool" = yes; then - # Libtool generates 2 separate objects for the 2 libraries. These - # two compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir$base.o.d # libtool 1.5 - tmpdepfile2=$dir.libs/$base.o.d # Likewise. - tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - # Same post-processing that is required for AIX mode. - aix_post_process_depfile - ;; - -msvc7) - if test "$libtool" = yes; then - showIncludes=-Wc,-showIncludes - else - showIncludes=-showIncludes - fi - "$@" $showIncludes > "$tmpdepfile" - stat=$? - grep -v '^Note: including file: ' "$tmpdepfile" - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The first sed program below extracts the file names and escapes - # backslashes for cygpath. The second sed program outputs the file - # name when reading, but also accumulates all include files in the - # hold buffer in order to output them again at the end. This only - # works with sed implementations that can handle large buffers. - sed < "$tmpdepfile" -n ' -/^Note: including file: *\(.*\)/ { - s//\1/ - s/\\/\\\\/g - p -}' | $cygpath_u | sort -u | sed -n ' -s/ /\\ /g -s/\(.*\)/'"$tab"'\1 \\/p -s/.\(.*\) \\/\1:/ -H -$ { - s/.*/'"$tab"'/ - G - p -}' >> "$depfile" - echo >> "$depfile" # make sure the fragment doesn't end with a backslash - rm -f "$tmpdepfile" - ;; - -msvc7msys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove '-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for ':' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. - "$@" $dashmflag | - sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this sed invocation - # correctly. Breaking it into two sed invocations is a workaround. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no eat=no - for arg - do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - if test $eat = yes; then - eat=no - continue - fi - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -arch) - eat=yes ;; - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix=`echo "$object" | sed 's/^.*\././'` - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - # makedepend may prepend the VPATH from the source file name to the object. - # No need to regex-escape $object, excess matching of '.' is harmless. - sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process the last invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed '1,2d' "$tmpdepfile" \ - | tr ' ' "$nl" \ - | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove '-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E \ - | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - | sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - IFS=" " - for arg - do - case "$arg" in - -o) - shift - ;; - $object) - shift - ;; - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E 2>/dev/null | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" - echo "$tab" >> "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvcmsys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC0" -# time-stamp-end: "; # UTC" -# End: diff -Nru tilda-1.5.2/build-aux/install-sh tilda-1.5.4/build-aux/install-sh --- tilda-1.5.2/build-aux/install-sh 2018-03-25 23:44:27.000000000 +0000 +++ tilda-1.5.4/build-aux/install-sh 1970-01-01 00:00:00.000000000 +0000 @@ -1,508 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2014-09-12.12; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# 'make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -tab=' ' -nl=' -' -IFS=" $tab$nl" - -# Set DOITPROG to "echo" to test this script. - -doit=${DOITPROG-} -doit_exec=${doit:-exec} - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -is_target_a_directory=possibly - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) - is_target_a_directory=always - dst_arg=$2 - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; - - -T) is_target_a_directory=never;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -# We allow the use of options -d and -T together, by making -d -# take the precedence; this is for compatibility with GNU install. - -if test -n "$dir_arg"; then - if test -n "$dst_arg"; then - echo "$0: target directory not allowed when installing a directory." >&2 - exit 1 - fi -fi - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call 'install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - if test $# -gt 1 || test "$is_target_a_directory" = always; then - if test ! -d "$dst_arg"; then - echo "$0: $dst_arg: Is not a directory." >&2 - exit 1 - fi - fi -fi - -if test -z "$dir_arg"; then - do_exit='(exit $ret); exit $ret' - trap "ret=129; $do_exit" 1 - trap "ret=130; $do_exit" 2 - trap "ret=141; $do_exit" 13 - trap "ret=143; $do_exit" 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names problematic for 'test' and other utilities. - case $src in - -* | [=\(\)!]) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - dst=$dst_arg - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test "$is_target_a_directory" = never; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - dstdir=`dirname "$dst"` - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - # $RANDOM is not portable (e.g. dash); use it when possible to - # lower collision chance - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 - - # As "mkdir -p" follows symlinks and we work in /tmp possibly; so - # create the $tmpdir first (and fail if unsuccessful) to make sure - # that nobody tries to guess the $tmpdir name. - if (umask $mkdir_umask && - $mkdirprog $mkdir_mode "$tmpdir" && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - test_tmpdir="$tmpdir/a" - ls_ld_tmpdir=`ls -ld "$test_tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; - esac - - oIFS=$IFS - IFS=/ - set -f - set fnord $dstdir - shift - set +f - IFS=$oIFS - - prefixes= - - for d - do - test X"$d" = X && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - set +f && - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru tilda-1.5.2/build-aux/missing tilda-1.5.4/build-aux/missing --- tilda-1.5.2/build-aux/missing 2018-03-25 23:44:27.000000000 +0000 +++ tilda-1.5.4/build-aux/missing 1970-01-01 00:00:00.000000000 +0000 @@ -1,215 +0,0 @@ -#! /bin/sh -# Common wrapper for a few potentially missing GNU programs. - -scriptversion=2013-10-28.13; # UTC - -# Copyright (C) 1996-2014 Free Software Foundation, Inc. -# Originally written by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try '$0 --help' for more information" - exit 1 -fi - -case $1 in - - --is-lightweight) - # Used by our autoconf macros to check whether the available missing - # script is modern enough. - exit 0 - ;; - - --run) - # Back-compat with the calling convention used by older automake. - shift - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due -to PROGRAM being missing or too old. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - -Supported PROGRAM values: - aclocal autoconf autoheader autom4te automake makeinfo - bison yacc flex lex help2man - -Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and -'g' are ignored when checking the name. - -Send bug reports to ." - exit $? - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? - ;; - - -*) - echo 1>&2 "$0: unknown '$1' option" - echo 1>&2 "Try '$0 --help' for more information" - exit 1 - ;; - -esac - -# Run the given program, remember its exit status. -"$@"; st=$? - -# If it succeeded, we are done. -test $st -eq 0 && exit 0 - -# Also exit now if we it failed (or wasn't found), and '--version' was -# passed; such an option is passed most likely to detect whether the -# program is present and works. -case $2 in --version|--help) exit $st;; esac - -# Exit code 63 means version mismatch. This often happens when the user -# tries to use an ancient version of a tool on a file that requires a -# minimum version. -if test $st -eq 63; then - msg="probably too old" -elif test $st -eq 127; then - # Program was missing. - msg="missing on your system" -else - # Program was found and executed, but failed. Give up. - exit $st -fi - -perl_URL=http://www.perl.org/ -flex_URL=http://flex.sourceforge.net/ -gnu_software_URL=http://www.gnu.org/software - -program_details () -{ - case $1 in - aclocal|automake) - echo "The '$1' program is part of the GNU Automake package:" - echo "<$gnu_software_URL/automake>" - echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" - echo "<$gnu_software_URL/autoconf>" - echo "<$gnu_software_URL/m4/>" - echo "<$perl_URL>" - ;; - autoconf|autom4te|autoheader) - echo "The '$1' program is part of the GNU Autoconf package:" - echo "<$gnu_software_URL/autoconf/>" - echo "It also requires GNU m4 and Perl in order to run:" - echo "<$gnu_software_URL/m4/>" - echo "<$perl_URL>" - ;; - esac -} - -give_advice () -{ - # Normalize program name to check for. - normalized_program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - - printf '%s\n' "'$1' is $msg." - - configure_deps="'configure.ac' or m4 files included by 'configure.ac'" - case $normalized_program in - autoconf*) - echo "You should only need it if you modified 'configure.ac'," - echo "or m4 files included by it." - program_details 'autoconf' - ;; - autoheader*) - echo "You should only need it if you modified 'acconfig.h' or" - echo "$configure_deps." - program_details 'autoheader' - ;; - automake*) - echo "You should only need it if you modified 'Makefile.am' or" - echo "$configure_deps." - program_details 'automake' - ;; - aclocal*) - echo "You should only need it if you modified 'acinclude.m4' or" - echo "$configure_deps." - program_details 'aclocal' - ;; - autom4te*) - echo "You might have modified some maintainer files that require" - echo "the 'autom4te' program to be rebuilt." - program_details 'autom4te' - ;; - bison*|yacc*) - echo "You should only need it if you modified a '.y' file." - echo "You may want to install the GNU Bison package:" - echo "<$gnu_software_URL/bison/>" - ;; - lex*|flex*) - echo "You should only need it if you modified a '.l' file." - echo "You may want to install the Fast Lexical Analyzer package:" - echo "<$flex_URL>" - ;; - help2man*) - echo "You should only need it if you modified a dependency" \ - "of a man page." - echo "You may want to install the GNU Help2man package:" - echo "<$gnu_software_URL/help2man/>" - ;; - makeinfo*) - echo "You should only need it if you modified a '.texi' file, or" - echo "any other file indirectly affecting the aspect of the manual." - echo "You might want to install the Texinfo package:" - echo "<$gnu_software_URL/texinfo/>" - echo "The spurious makeinfo call might also be the consequence of" - echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" - echo "want to install GNU make:" - echo "<$gnu_software_URL/make/>" - ;; - *) - echo "You might have modified some files without having the proper" - echo "tools for further handling them. Check the 'README' file, it" - echo "often tells you about the needed prerequisites for installing" - echo "this package. You may also peek at any GNU archive site, in" - echo "case some other package contains this missing '$1' program." - ;; - esac -} - -give_advice "$1" | sed -e '1s/^/WARNING: /' \ - -e '2,$s/^/ /' >&2 - -# Propagate the correct exit status (expected to be 127 for a program -# not found, 63 for a program that failed due to version mismatch). -exit $st - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru tilda-1.5.2/ChangeLog tilda-1.5.4/ChangeLog --- tilda-1.5.2/ChangeLog 2020-05-10 14:15:12.000000000 +0000 +++ tilda-1.5.4/ChangeLog 2020-12-24 10:31:23.000000000 +0000 @@ -1,3 +1,15 @@ +version 1.5.4 (2020-12-24): + * Fixed an issue that occurs with newer tilda versions which prevents + custom commands from working correctly in newer VTE versions. + Fixes #435, #436, #440 (Jimun Batty). + * Fixes an incorrect usage of 32bit data type for X11 time, which + should be 64bit instead (Sebastian Geiger). + +version 1.5.3 (2020-11-01): + * Fixed an issue that could cause tilda to crash due to a BadMatch X11 + error in certain situations (such as when using the Marco + window manager of the Mate Desktop 1.24.1) (Emanuele F.). + version 1.5.2 (2020-05-09): * Fixed an issue in the URL matching code that caused a VTE warning about a missing multiline flag to be emitted at runtime. diff -Nru tilda-1.5.2/configure tilda-1.5.4/configure --- tilda-1.5.2/configure 2020-05-10 14:15:44.000000000 +0000 +++ tilda-1.5.4/configure 1970-01-01 00:00:00.000000000 +0000 @@ -1,9154 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for Tilda 1.5.2. -# -# Report bugs to . -# -# -# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and tilda_issues about -$0: your system, including any error possibly output before -$0: this message. Then install a modern shell, or manually -$0: run the script under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='Tilda' -PACKAGE_TARNAME='tilda' -PACKAGE_VERSION='1.5.2' -PACKAGE_STRING='Tilda 1.5.2' -PACKAGE_BUGREPORT='tilda_issues' -PACKAGE_URL='tilda_repository' - -ac_unique_file="src/tilda.c" -gt_needs= -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -POW_LIB -LIBOBJS -X11_LIBS -X11_CFLAGS -LIBCONFUSE_LIBS -LIBCONFUSE_CFLAGS -VTE_LIBS -VTE_CFLAGS -GTK_LIBS -GTK_CFLAGS -PKG_CONFIG_LIBDIR -PKG_CONFIG_PATH -PKG_CONFIG -POSUB -LTLIBINTL -LIBINTL -INTLLIBS -LTLIBICONV -LIBICONV -INTL_MACOSX_LIBS -EGREP -GREP -CPP -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -XGETTEXT_EXTRA_OPTIONS -MSGMERGE -XGETTEXT_015 -XGETTEXT -GMSGFMT_015 -MSGFMT_015 -GMSGFMT -MSGFMT -GETTEXT_MACRO_VERSION -USE_NLS -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -GLIB_COMPILE_RESOURCES -GLIB_MKENUMS -MAINT -MAINTAINER_MODE_FALSE -MAINTAINER_MODE_TRUE -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -AM_DEFAULT_V -AM_V -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -runstatedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_maintainer_mode -enable_maintainer_flags -enable_debug -enable_debug_functions -enable_clang -enable_lto -enable_dependency_tracking -enable_nls -with_gnu_ld -enable_rpath -with_libiconv_prefix -with_libintl_prefix -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP -PKG_CONFIG -PKG_CONFIG_PATH -PKG_CONFIG_LIBDIR -GTK_CFLAGS -GTK_LIBS -VTE_CFLAGS -VTE_LIBS -LIBCONFUSE_CFLAGS -LIBCONFUSE_LIBS -X11_CFLAGS -X11_LIBS' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -runstatedir='${localstatedir}/run' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -runstatedir | --runstatedir | --runstatedi | --runstated \ - | --runstate | --runstat | --runsta | --runst | --runs \ - | --run | --ru | --r) - ac_prev=runstatedir ;; - -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ - | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ - | --run=* | --ru=* | --r=*) - runstatedir=$ac_optarg ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir runstatedir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures Tilda 1.5.2 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/tilda] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of Tilda 1.5.2:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: "make V=1") - --disable-silent-rules verbose build output (undo: "make V=0") - --disable-maintainer-mode - disable make rules and dependencies not useful (and - sometimes confusing) to the casual installer - --enable-maintainer-flags - Enables extra debugging; use this option if you want - to develop for tilda, but to not use it as an end - user if you just want to compile and use tilda. This - option includes the --enable-debug and - --enable-debug-functions options. And sets several - CFLAGS to enable more gcc warnings and errors. - --enable-debug Enables extra debugging output and sets debug flags - for gdb - --enable-debug-functions - Enables function call tracing. When this option is - enabled tilda will print the name of each function - that is called to the console. - --enable-clang use clang instead of gcc as C compiler. - --enable-lto Optimize at link time. This enables the compiler to - do a better job at optimization and (hopefully) - produce smaller binaries. - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build - --disable-nls do not use Native Language Support - --disable-rpath do not hardcode runtime library paths - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld default=no - --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib - --without-libiconv-prefix don't search for libiconv in includedir and libdir - --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib - --without-libintl-prefix don't search for libintl in includedir and libdir - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - PKG_CONFIG path to pkg-config utility - PKG_CONFIG_PATH - directories to add to pkg-config's search path - PKG_CONFIG_LIBDIR - path overriding pkg-config's built-in search path - GTK_CFLAGS C compiler flags for GTK, overriding pkg-config - GTK_LIBS linker flags for GTK, overriding pkg-config - VTE_CFLAGS C compiler flags for VTE, overriding pkg-config - VTE_LIBS linker flags for VTE, overriding pkg-config - LIBCONFUSE_CFLAGS - C compiler flags for LIBCONFUSE, overriding pkg-config - LIBCONFUSE_LIBS - linker flags for LIBCONFUSE, overriding pkg-config - X11_CFLAGS C compiler flags for X11, overriding pkg-config - X11_LIBS linker flags for X11, overriding pkg-config - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -Tilda home page: . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -Tilda configure 1.5.2 -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -( $as_echo "## --------------------------- ## -## Report this to tilda_issues ## -## --------------------------- ##" - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_mongrel - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_check_type LINENO TYPE VAR INCLUDES -# ------------------------------------------- -# Tests whether TYPE exists after having included INCLUDES, setting cache -# variable VAR accordingly. -ac_fn_c_check_type () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=no" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof ($2)) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof (($2))) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - eval "$3=yes" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_type - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by Tilda $as_me 1.5.2, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -gt_needs="$gt_needs " -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -ac_aux_dir= -for ac_dir in build-aux "$srcdir"/build-aux; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - - -ac_config_headers="$ac_config_headers tilda-config.h:tilda-config.h.in" - - -am__api_version='1.15' - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken - alias in your environment" "$LINENO" 5 - fi - if test "$2" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi - -rm -f conftest.file - -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# Expand $ac_aux_dir to an absolute path. -am_aux_dir=`cd "$ac_aux_dir" && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=1;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='tilda' - VERSION='1.5.2' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -mkdir_p='$(MKDIR_P)' - -# We need awk for the "check" target (and possibly the TAP driver). The -# system "awk" is bad on some platforms. -# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AMTAR='$${TAR-tar}' - - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar pax cpio none' - -am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' - - - - - - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 - fi -fi - - -# We are going to use silent builds which have a much -# nicer output. More information can be found here: -# https://wiki.gnome.org/Initiatives/GnomeGoals/NicerBuilds -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=0;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - - -# See http://www.gnu.org/savannah-checkouts/gnu/automake/manual/html_node/maintainer_002dmode.html -# for an explanation of using this macro. The short explanation is: -# AM_MAINTAINER_MODE is bad but -# AM_MAINTAINER_MODE([enable]) is good - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 -$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } - # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then : - enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -else - USE_MAINTAINER_MODE=yes -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 -$as_echo "$USE_MAINTAINER_MODE" >&6; } - if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= - MAINTAINER_MODE_FALSE='#' -else - MAINTAINER_MODE_TRUE='#' - MAINTAINER_MODE_FALSE= -fi - - MAINT=$MAINTAINER_MODE_TRUE - - - -# This registers the option '--enable-maintainer-flags' to the ./configure script -# If this option is set then it activates both the '--enable-debug' and '--enable-debug-functions' -# options that are defined below. It also activates several flags to the compile such that it -# will show more warnings and errors to indicate problems in the source code. -# Check whether --enable-maintainer-flags was given. -if test "${enable_maintainer_flags+set}" = set; then : - enableval=$enable_maintainer_flags; -fi - - -if test "x$enable_maintainer_flags" = "xyes"; then - enable_debug="yes" - enable_debug_functions="yes" - CFLAGS="$CFLAGS \ - -Wall \ - -Wextra \ - -fno-common \ - -Wstrict-aliasing=2 \ - -Wshadow \ - -Wmissing-prototypes \ - -Wmissing-declarations \ - -Wcast-align \ - -Wuninitialized \ - -Wno-strict-aliasing \ - -Werror=pointer-arith \ - -Werror=missing-declarations \ - -Werror=redundant-decls \ - -Werror=empty-body \ - -Werror=format \ - -Werror=format-security \ - -Werror=format-nonliteral \ - -Werror=init-self \ - -Werror=vla \ - -Wno-unused-parameter \ - " -fi - -# This registers the option '--enable-debug' in the ./configure script -# If this option is set, then the the options -g and -ggdb will be -# passed to the compiler. -# Check whether --enable-debug was given. -if test "${enable_debug+set}" = set; then : - enableval=$enable_debug; -fi - - -if test "x$enable_debug" = "xyes"; then - -$as_echo "#define DEBUG 1" >>confdefs.h - - CFLAGS="$CFLAGS -g -ggdb" -fi - -# This registers the option '--debug-functions' in the ./configure script -# If this option is set, then the name of each entered function will be -# printed on the shell. -# Check whether --enable-debug-functions was given. -if test "${enable_debug_functions+set}" = set; then : - enableval=$enable_debug_functions; -fi - - -if test "x$enable_debug_functions" = "xyes"; then - -$as_echo "#define DEBUG_FUNCTIONS 1" >>confdefs.h - -fi - -# Check whether --enable-clang was given. -if test "${enable_clang+set}" = set; then : - enableval=$enable_clang; -fi - - -#Use C99 compilation mode -if test "x$enable_clang" = "xyes"; then - # clang uses c99 mode by default, so we just set CC to clang and we are done - CC="clang"; -else - # We do not need to set CC as the default is gcc, but we need to set it to - # use C99 compilation mode - CFLAGS="$CFLAGS -std=c99"; -fi - -# Check whether --enable-lto was given. -if test "${enable_lto+set}" = set; then : - enableval=$enable_lto; -fi - - -if test "x$enable_lto" = "xyes"; then - CFLAGS="$CFLAGS -flto" - if test "$CC" != "clang"; then - # If the user has enabled lto explicitly, we assume he has made sure - # that his toolchain can indeed handle lto objects. - CFLAGS="$CFLAGS -fno-fat-lto-objects" - fi - # In the case of lto optimizations, we need to pass the optimization options - # to the linker as well as telling it to use the linker plugin. - LDFLAGS="$LDFLAGS $CFLAGS -fuse-linker-plugin" -fi - - - -# Extract the first word of "glib-mkenums", so it can be a program name with args. -set dummy glib-mkenums; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GLIB_MKENUMS+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GLIB_MKENUMS in - [\\/]* | ?:[\\/]*) - ac_cv_path_GLIB_MKENUMS="$GLIB_MKENUMS" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GLIB_MKENUMS="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GLIB_MKENUMS" && ac_cv_path_GLIB_MKENUMS="no" - ;; -esac -fi -GLIB_MKENUMS=$ac_cv_path_GLIB_MKENUMS -if test -n "$GLIB_MKENUMS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_MKENUMS" >&5 -$as_echo "$GLIB_MKENUMS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test x$GLIB_MKENUMS = xno; then - as_fn_error $? "Could not find a glib-mkenums in your PATH" "$LINENO" 5 -fi - -# Extract the first word of "glib-compile-resources", so it can be a program name with args. -set dummy glib-compile-resources; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GLIB_COMPILE_RESOURCES+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GLIB_COMPILE_RESOURCES in - [\\/]* | ?:[\\/]*) - ac_cv_path_GLIB_COMPILE_RESOURCES="$GLIB_COMPILE_RESOURCES" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GLIB_COMPILE_RESOURCES="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GLIB_COMPILE_RESOURCES" && ac_cv_path_GLIB_COMPILE_RESOURCES="no" - ;; -esac -fi -GLIB_COMPILE_RESOURCES=$ac_cv_path_GLIB_COMPILE_RESOURCES -if test -n "$GLIB_COMPILE_RESOURCES"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_RESOURCES" >&5 -$as_echo "$GLIB_COMPILE_RESOURCES" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test x$GLIB_COMPILE_RESOURCES = xno; then - as_fn_error $? "Could not find a glib-compile-resources in your PATH" "$LINENO" 5 -fi - -# Checks for programs. -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - - -# This will initialize the internationalization -# capabilities of glib (glib/gi18n.h) and gettext - - -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 -$as_echo_n "checking whether NLS is requested... " >&6; } - # Check whether --enable-nls was given. -if test "${enable_nls+set}" = set; then : - enableval=$enable_nls; USE_NLS=$enableval -else - USE_NLS=yes -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 -$as_echo "$USE_NLS" >&6; } - - - - - GETTEXT_MACRO_VERSION=0.18 - - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case "$MSGFMT" in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" - ;; -esac -fi -MSGFMT="$ac_cv_path_MSGFMT" -if test "$MSGFMT" != ":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 -$as_echo "$MSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - # Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GMSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 -$as_echo "$GMSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; - *) MSGFMT_015=$MSGFMT ;; - esac - - case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; - *) GMSGFMT_015=$GMSGFMT ;; - esac - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_XGETTEXT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case "$XGETTEXT" in - [\\/]* | ?:[\\/]*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" - ;; -esac -fi -XGETTEXT="$ac_cv_path_XGETTEXT" -if test "$XGETTEXT" != ":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 -$as_echo "$XGETTEXT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - rm -f messages.po - - case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; - *) XGETTEXT_015=$XGETTEXT ;; - esac - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "msgmerge", so it can be a program name with args. -set dummy msgmerge; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGMERGE+:} false; then : - $as_echo_n "(cached) " >&6 -else - case "$MSGMERGE" in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then - ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" - ;; -esac -fi -MSGMERGE="$ac_cv_path_MSGMERGE" -if test "$MSGMERGE" != ":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 -$as_echo "$MSGMERGE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$localedir" || localedir='${datadir}/locale' - - - test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= - - - ac_config_commands="$ac_config_commands po-directories" - - - - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5 -$as_echo_n "checking for ld used by GCC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${acl_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break ;; - *) - test "$with_gnu_ld" != yes && break ;; - esac - fi - done - IFS="$ac_save_ifs" -else - acl_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$acl_cv_path_LD" -if test -n "$LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${acl_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$acl_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$acl_cv_prog_gnu_ld - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 -$as_echo_n "checking for shared library run path origin... " >&6; } -if ${acl_cv_rpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 -$as_echo "$acl_cv_rpath" >&6; } - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - # Check whether --enable-rpath was given. -if test "${enable_rpath+set}" = set; then : - enableval=$enable_rpath; : -else - enable_rpath=yes -fi - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - - - - acl_libdirstem=lib - acl_libdirstem2= - case "$host_os" in - solaris*) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5 -$as_echo_n "checking for 64-bit host... " >&6; } -if ${gl_cv_solaris_64bit+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef _LP64 -sixtyfour bits -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "sixtyfour bits" >/dev/null 2>&1; then : - gl_cv_solaris_64bit=yes -else - gl_cv_solaris_64bit=no -fi -rm -f conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5 -$as_echo "$gl_cv_solaris_64bit" >&6; } - if test $gl_cv_solaris_64bit = yes; then - acl_libdirstem=lib/64 - case "$host_cpu" in - sparc*) acl_libdirstem2=lib/sparcv9 ;; - i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; - esac - fi - ;; - *) - searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test -n "$searchpath"; then - acl_save_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; - */../ | */.. ) - # Better ignore directories of this form. They are misleading. - ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib64 ) acl_libdirstem=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_save_IFS" - fi - ;; - esac - test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" - - - - - - - - - - - - - use_additional=yes - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - -# Check whether --with-libiconv-prefix was given. -if test "${with_libiconv_prefix+set}" = set; then : - withval=$with_libiconv_prefix; - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - if test "$acl_libdirstem2" != "$acl_libdirstem" \ - && ! test -d "$withval/$acl_libdirstem"; then - additional_libdir="$withval/$acl_libdirstem2" - fi - fi - fi - -fi - - LIBICONV= - LTLIBICONV= - INCICONV= - LIBICONV_PREFIX= - HAVE_LIBICONV= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='iconv ' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" - else - : - fi - else - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - if test "$acl_hardcode_direct" = yes; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" - fi - fi - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = 'iconv'; then - LIBICONV_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = 'iconv'; then - LIBICONV_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INCICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - if test -n "$found_la"; then - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" - ;; - esac - done - fi - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - else - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - for found_dir in $ltrpathdirs; do - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" - done - fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5 -$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; } -if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then : - $as_echo_n "(cached) " >&6 -else - gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -CFPreferencesCopyAppValue(NULL, NULL) - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - gt_cv_func_CFPreferencesCopyAppValue=yes -else - gt_cv_func_CFPreferencesCopyAppValue=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$gt_save_LIBS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 -$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } - if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then - -$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h - - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5 -$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; } -if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then : - $as_echo_n "(cached) " >&6 -else - gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -CFLocaleCopyCurrent(); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - gt_cv_func_CFLocaleCopyCurrent=yes -else - gt_cv_func_CFLocaleCopyCurrent=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$gt_save_LIBS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 -$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; } - if test $gt_cv_func_CFLocaleCopyCurrent = yes; then - -$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h - - fi - INTL_MACOSX_LIBS= - if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then - INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" - fi - - - - - - - LIBINTL= - LTLIBINTL= - POSUB= - - case " $gt_needs " in - *" need-formatstring-macros "*) gt_api_version=3 ;; - *" need-ngettext "*) gt_api_version=2 ;; - *) gt_api_version=1 ;; - esac - gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" - gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" - - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - - - if test $gt_api_version -ge 3; then - gt_revision_test_code=' -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -' - else - gt_revision_test_code= - fi - if test $gt_api_version -ge 2; then - gt_expression_test_code=' + * ngettext ("", "", 0)' - else - gt_expression_test_code= - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5 -$as_echo_n "checking for GNU gettext in libc... " >&6; } -if eval \${$gt_func_gnugettext_libc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings; -int -main () -{ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$gt_func_gnugettext_libc=yes" -else - eval "$gt_func_gnugettext_libc=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$gt_func_gnugettext_libc - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - - - - - - am_save_CPPFLAGS="$CPPFLAGS" - - for element in $INCICONV; do - haveit= - for x in $CPPFLAGS; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" - fi - done - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 -$as_echo_n "checking for iconv... " >&6; } -if ${am_cv_func_iconv+:} false; then : - $as_echo_n "(cached) " >&6 -else - - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -int -main () -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - am_cv_func_iconv=yes -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -int -main () -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - am_cv_lib_iconv=yes - am_cv_func_iconv=yes -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$am_save_LIBS" - fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 -$as_echo "$am_cv_func_iconv" >&6; } - if test "$am_cv_func_iconv" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 -$as_echo_n "checking for working iconv... " >&6; } -if ${am_cv_func_iconv_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - - am_save_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - if test "$cross_compiling" = yes; then : - case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include -int main () -{ - /* Test against AIX 5.1 bug: Failures are not distinguishable from successful - returns. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static const char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - return 1; - } - } - /* Test against Solaris 10 bug: Failures are not distinguishable from - successful returns. */ - { - iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); - if (cd_ascii_to_88591 != (iconv_t)(-1)) - { - static const char input[] = "\263"; - char buf[10]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_ascii_to_88591, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - return 1; - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - return 1; - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - if (/* Try standardized names. */ - iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) - /* Try IRIX, OSF/1 names. */ - && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) - /* Try AIX names. */ - && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) - /* Try HP-UX names. */ - && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) - return 1; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - am_cv_func_iconv_works=yes -else - am_cv_func_iconv_works=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - LIBS="$am_save_LIBS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 -$as_echo "$am_cv_func_iconv_works" >&6; } - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - -$as_echo "#define HAVE_ICONV 1" >>confdefs.h - - fi - if test "$am_cv_lib_iconv" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 -$as_echo_n "checking how to link with libiconv... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 -$as_echo "$LIBICONV" >&6; } - else - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - - - - - - - - - - - - use_additional=yes - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - -# Check whether --with-libintl-prefix was given. -if test "${with_libintl_prefix+set}" = set; then : - withval=$with_libintl_prefix; - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - if test "$acl_libdirstem2" != "$acl_libdirstem" \ - && ! test -d "$withval/$acl_libdirstem"; then - additional_libdir="$withval/$acl_libdirstem2" - fi - fi - fi - -fi - - LIBINTL= - LTLIBINTL= - INCINTL= - LIBINTL_PREFIX= - HAVE_LIBINTL= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='intl ' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" - else - : - fi - else - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - if test "$acl_hardcode_direct" = yes; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - haveit= - for x in $LDFLAGS $LIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" - fi - fi - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = 'intl'; then - LIBINTL_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = 'intl'; then - LIBINTL_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INCINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - if test -n "$found_la"; then - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" - ;; - esac - done - fi - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" - else - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - for found_dir in $ltrpathdirs; do - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" - done - fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5 -$as_echo_n "checking for GNU gettext in libintl... " >&6; } -if eval \${$gt_func_gnugettext_libintl+:} false; then : - $as_echo_n "(cached) " >&6 -else - gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -int -main () -{ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$gt_func_gnugettext_libintl=yes" -else - eval "$gt_func_gnugettext_libintl=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -int -main () -{ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - eval "$gt_func_gnugettext_libintl=yes" - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS" -fi -eval ac_res=\$$gt_func_gnugettext_libintl - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - fi - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ - || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools; }; then - gt_use_preinstalled_gnugettext=yes - else - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - - - if test -n "$INTL_MACOSX_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" - fi - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - -$as_echo "#define ENABLE_NLS 1" >>confdefs.h - - else - USE_NLS=no - fi - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5 -$as_echo_n "checking whether to use NLS... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 -$as_echo "$USE_NLS" >&6; } - if test "$USE_NLS" = "yes"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5 -$as_echo_n "checking where the gettext function comes from... " >&6; } - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5 -$as_echo "$gt_source" >&6; } - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5 -$as_echo_n "checking how to link with libintl... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5 -$as_echo "$LIBINTL" >&6; } - - for element in $INCINTL; do - haveit= - for x in $CPPFLAGS; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" - fi - done - - fi - - -$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h - - -$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h - - fi - - POSUB=po - fi - - - - INTLLIBS="$LIBINTL" - - - - - - -# Checks for libraries. - - - - - - - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 -$as_echo "$PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 -$as_echo "$ac_pt_PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.9.0 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 -$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - PKG_CONFIG="" - fi -fi - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5 -$as_echo_n "checking for GTK... " >&6; } - -if test -n "$GTK_CFLAGS"; then - pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0 >= 3.10.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "gtk+-3.0 >= 3.10.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-3.0 >= 3.10.0" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$GTK_LIBS"; then - pkg_cv_GTK_LIBS="$GTK_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0 >= 3.10.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "gtk+-3.0 >= 3.10.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-3.0 >= 3.10.0" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gtk+-3.0 >= 3.10.0" 2>&1` - else - GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gtk+-3.0 >= 3.10.0" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$GTK_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (gtk+-3.0 >= 3.10.0) were not met: - -$GTK_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GTK_CFLAGS -and GTK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GTK_CFLAGS -and GTK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details" "$LINENO" 5; } -else - GTK_CFLAGS=$pkg_cv_GTK_CFLAGS - GTK_LIBS=$pkg_cv_GTK_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for VTE" >&5 -$as_echo_n "checking for VTE... " >&6; } - -if test -n "$VTE_CFLAGS"; then - pkg_cv_VTE_CFLAGS="$VTE_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"vte-2.91 >= 0.40\""; } >&5 - ($PKG_CONFIG --exists --print-errors "vte-2.91 >= 0.40") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_VTE_CFLAGS=`$PKG_CONFIG --cflags "vte-2.91 >= 0.40" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$VTE_LIBS"; then - pkg_cv_VTE_LIBS="$VTE_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"vte-2.91 >= 0.40\""; } >&5 - ($PKG_CONFIG --exists --print-errors "vte-2.91 >= 0.40") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_VTE_LIBS=`$PKG_CONFIG --libs "vte-2.91 >= 0.40" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - VTE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "vte-2.91 >= 0.40" 2>&1` - else - VTE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "vte-2.91 >= 0.40" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$VTE_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (vte-2.91 >= 0.40) were not met: - -$VTE_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables VTE_CFLAGS -and VTE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables VTE_CFLAGS -and VTE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details" "$LINENO" 5; } -else - VTE_CFLAGS=$pkg_cv_VTE_CFLAGS - VTE_LIBS=$pkg_cv_VTE_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBCONFUSE" >&5 -$as_echo_n "checking for LIBCONFUSE... " >&6; } - -if test -n "$LIBCONFUSE_CFLAGS"; then - pkg_cv_LIBCONFUSE_CFLAGS="$LIBCONFUSE_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libconfuse\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libconfuse") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_LIBCONFUSE_CFLAGS=`$PKG_CONFIG --cflags "libconfuse" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$LIBCONFUSE_LIBS"; then - pkg_cv_LIBCONFUSE_LIBS="$LIBCONFUSE_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libconfuse\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libconfuse") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_LIBCONFUSE_LIBS=`$PKG_CONFIG --libs "libconfuse" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - LIBCONFUSE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libconfuse" 2>&1` - else - LIBCONFUSE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libconfuse" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$LIBCONFUSE_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (libconfuse) were not met: - -$LIBCONFUSE_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables LIBCONFUSE_CFLAGS -and LIBCONFUSE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables LIBCONFUSE_CFLAGS -and LIBCONFUSE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details" "$LINENO" 5; } -else - LIBCONFUSE_CFLAGS=$pkg_cv_LIBCONFUSE_CFLAGS - LIBCONFUSE_LIBS=$pkg_cv_LIBCONFUSE_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X11" >&5 -$as_echo_n "checking for X11... " >&6; } - -if test -n "$X11_CFLAGS"; then - pkg_cv_X11_CFLAGS="$X11_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11\""; } >&5 - ($PKG_CONFIG --exists --print-errors "x11") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_X11_CFLAGS=`$PKG_CONFIG --cflags "x11" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$X11_LIBS"; then - pkg_cv_X11_LIBS="$X11_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11\""; } >&5 - ($PKG_CONFIG --exists --print-errors "x11") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_X11_LIBS=`$PKG_CONFIG --libs "x11" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - X11_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "x11" 2>&1` - else - X11_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "x11" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$X11_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (x11) were not met: - -$X11_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables X11_CFLAGS -and X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables X11_CFLAGS -and X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details" "$LINENO" 5; } -else - X11_CFLAGS=$pkg_cv_X11_CFLAGS - X11_LIBS=$pkg_cv_X11_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - -# Checks for header files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in fcntl.h malloc.h stdlib.h string.h strings.h sys/ioctl.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -# Checks for typedefs, structures, and compiler characteristics. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 -$as_echo_n "checking for an ANSI C-conforming const... " >&6; } -if ${ac_cv_c_const+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - -#ifndef __cplusplus - /* Ultrix mips cc rejects this sort of thing. */ - typedef int charset[2]; - const charset cs = { 0, 0 }; - /* SunOS 4.1.1 cc rejects this. */ - char const *const *pcpcc; - char **ppc; - /* NEC SVR4.0.2 mips cc rejects this. */ - struct point {int x, y;}; - static struct point const zero = {0,0}; - /* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in - an arm of an if-expression whose if-part is not a constant - expression */ - const char *g = "string"; - pcpcc = &g + (g ? g-g : 0); - /* HPUX 7.0 cc rejects these. */ - ++pcpcc; - ppc = (char**) pcpcc; - pcpcc = (char const *const *) ppc; - { /* SCO 3.2v4 cc rejects this sort of thing. */ - char tx; - char *t = &tx; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; - if (s) return 0; - } - { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; - } - { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; - } - { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; } bx; - struct s *b = &bx; b->j = 5; - } - { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; - if (!foo) return 0; - } - return !cs[0] && !zero.x; -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_const=yes -else - ac_cv_c_const=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 -$as_echo "$ac_cv_c_const" >&6; } -if test $ac_cv_c_const = no; then - -$as_echo "#define const /**/" >>confdefs.h - -fi - -ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default" -if test "x$ac_cv_type_pid_t" = xyes; then : - -else - -cat >>confdefs.h <<_ACEOF -#define pid_t int -_ACEOF - -fi - -ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" -if test "x$ac_cv_type_size_t" = xyes; then : - -else - -cat >>confdefs.h <<_ACEOF -#define size_t unsigned int -_ACEOF - -fi - - -# Checks for library functions. -for ac_header in stdlib.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" -if test "x$ac_cv_header_stdlib_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_STDLIB_H 1 -_ACEOF - -fi - -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5 -$as_echo_n "checking for GNU libc compatible malloc... " >&6; } -if ${ac_cv_func_malloc_0_nonnull+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - ac_cv_func_malloc_0_nonnull=no -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#if defined STDC_HEADERS || defined HAVE_STDLIB_H -# include -#else -char *malloc (); -#endif - -int -main () -{ -return ! malloc (0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_func_malloc_0_nonnull=yes -else - ac_cv_func_malloc_0_nonnull=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5 -$as_echo "$ac_cv_func_malloc_0_nonnull" >&6; } -if test $ac_cv_func_malloc_0_nonnull = yes; then : - -$as_echo "#define HAVE_MALLOC 1" >>confdefs.h - -else - $as_echo "#define HAVE_MALLOC 0" >>confdefs.h - - case " $LIBOBJS " in - *" malloc.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS malloc.$ac_objext" - ;; -esac - - -$as_echo "#define malloc rpl_malloc" >>confdefs.h - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strtod" >&5 -$as_echo_n "checking for working strtod... " >&6; } -if ${ac_cv_func_strtod+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - ac_cv_func_strtod=no -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -$ac_includes_default -#ifndef strtod -double strtod (); -#endif -int -main() -{ - { - /* Some versions of Linux strtod mis-parse strings with leading '+'. */ - char *string = " +69"; - char *term; - double value; - value = strtod (string, &term); - if (value != 69 || term != (string + 4)) - return 1; - } - - { - /* Under Solaris 2.4, strtod returns the wrong value for the - terminating character under some conditions. */ - char *string = "NaN"; - char *term; - strtod (string, &term); - if (term != string && *(term - 1) == 0) - return 1; - } - return 0; -} - -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_func_strtod=yes -else - ac_cv_func_strtod=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strtod" >&5 -$as_echo "$ac_cv_func_strtod" >&6; } -if test $ac_cv_func_strtod = no; then - case " $LIBOBJS " in - *" strtod.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS strtod.$ac_objext" - ;; -esac - -ac_fn_c_check_func "$LINENO" "pow" "ac_cv_func_pow" -if test "x$ac_cv_func_pow" = xyes; then : - -fi - -if test $ac_cv_func_pow = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pow in -lm" >&5 -$as_echo_n "checking for pow in -lm... " >&6; } -if ${ac_cv_lib_m_pow+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char pow (); -int -main () -{ -return pow (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_m_pow=yes -else - ac_cv_lib_m_pow=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_pow" >&5 -$as_echo "$ac_cv_lib_m_pow" >&6; } -if test "x$ac_cv_lib_m_pow" = xyes; then : - POW_LIB=-lm -else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot find library containing definition of pow" >&5 -$as_echo "$as_me: WARNING: cannot find library containing definition of pow" >&2;} -fi - -fi - -fi - -for ac_func in mkdir strcasecmp strchr strncasecmp strstr strtol -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - -ac_config_files="$ac_config_files Makefile po/Makefile.in" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 -$as_echo_n "checking that generated files are newer than configure... " >&6; } - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 -$as_echo "done" >&6; } - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by Tilda $as_me 1.5.2, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to . -Tilda home page: ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -Tilda config.status 1.5.2 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" -# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it - # from automake < 1.5. - eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "tilda-config.h") CONFIG_HEADERS="$CONFIG_HEADERS tilda-config.h:tilda-config.h.in" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "po-directories":C) - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - # Treat a directory as a PO directory if and only if it has a - # POTFILES.in file. This allows packages to have multiple PO - # directories under different names or in different locations. - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - - - -cflaglines="" -cflagcount=0 -for flag in ${CFLAGS}; do - cflaglines=$cflaglines$flag" " - cflagcount=$(($cflagcount+1)) - if (( $cflagcount % 4 == 0)); then - cflaglines=$cflaglines" - " - fi -done; - -echo " - ${PACKAGE} $VERSION - `echo ${PACKAGE} $VERSION | sed "s/./=/g"` - - prefix: ${prefix} - datarootdir: ${datarootdir} - datadir: ${datadir} - pkgdatadir: `if test x${pkgdatadir} != "x"; then echo ${pkgdatadir}; else echo ${datadir}/${PACKAGE}; fi` - source code location: ${srcdir} - compiler: ${CC} - cflags: ${cflaglines} - Maintainer mode: ${USE_MAINTAINER_MODE} - VTE: ${vte_package} - Use *_DISABLE_DEPRECATED: ${enable_deprecation_flags} -" diff -Nru tilda-1.5.2/configure.ac tilda-1.5.4/configure.ac --- tilda-1.5.2/configure.ac 2020-05-10 14:15:12.000000000 +0000 +++ tilda-1.5.4/configure.ac 2020-12-24 10:31:23.000000000 +0000 @@ -12,7 +12,7 @@ AC_PREREQ([2.68]) AC_INIT([Tilda], - [1.5.2], + [1.5.4], [tilda_issues], [tilda], [tilda_repository]) diff -Nru tilda-1.5.2/debian/changelog tilda-1.5.4/debian/changelog --- tilda-1.5.2/debian/changelog 2020-05-09 11:01:51.000000000 +0000 +++ tilda-1.5.4/debian/changelog 2020-12-25 15:01:51.000000000 +0000 @@ -1,3 +1,9 @@ +tilda (1.5.4-1) unstable; urgency=medium + + * Packaged new upstream version. + + -- Sebastian Geiger Fri, 25 Dec 2020 17:01:51 +0200 + tilda (1.5.2-1) unstable; urgency=medium * Packaged new upstream version. Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/docs/multi-monitor-setup.png and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/docs/multi-monitor-setup.png differ Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/docs/multi-monitor-setup.xcf and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/docs/multi-monitor-setup.xcf differ diff -Nru tilda-1.5.2/.gitignore tilda-1.5.4/.gitignore --- tilda-1.5.2/.gitignore 1970-01-01 00:00:00.000000000 +0000 +++ tilda-1.5.4/.gitignore 2020-12-24 10:31:23.000000000 +0000 @@ -0,0 +1,53 @@ +*.o +m4 +po/*~ +po/*.gmo +po/*.sed +po/*.sin +Makefile +Makefile.in +aclocal.m4 +autom4te.cache/ +compile +config.guess +config.log +config.rpath +config.status +config.sub +configure +depcomp +install-sh +missing +po/Makefile +po/Makefile.in +po/Makefile.in.in +po/Makevars.template +po/POTFILES +po/Rules-quot +po/en@boldquot.header +po/en@quot.header +po/stamp-po +po/tilda.pot +src/.deps/ +src/Makefile +src/Makefile.in +src/key_converter.c +src/glade-resources.c +src/glade-resources.h +src/tilda +stamp-h1 +src/tilda.ui~ +tilda-config.h +tilda-config.h.in +tilda-config.h.in~ +tilda.desktop +ylwrap +ABOUT-NLS +INSTALL +*.anjuta* +.project +.cproject +.kdev4 +.idea +build/ +cmake-build-debug/ diff -Nru tilda-1.5.2/HACKING.md tilda-1.5.4/HACKING.md --- tilda-1.5.2/HACKING.md 1970-01-01 00:00:00.000000000 +0000 +++ tilda-1.5.4/HACKING.md 2020-12-24 10:31:23.000000000 +0000 @@ -0,0 +1,127 @@ +# Compiling and Installing + +## Dependencies + + * Glib >= 2.30 - http://developer.gnome.org/glib/2.30/ + * Gtk+3 >= 3.0 - http://developer.gnome.org/gtk3/3.0/ + * VTE >= 2.91 - http://developer.gnome.org/vte/0.30/ + * libConfuse - http://www.nongnu.org/confuse/ + * libx11-dev - http://www.x.org/wiki/ + +On Ubuntu based system install dependencies with: + + sudo apt-get install git dh-autoreconf autotools-dev debhelper libconfuse-dev libgtk-3-dev libvte-2.91-dev pkg-config + +You possibly need other packages such as `gettext`, `automake`, `autoconf`, `autopoint`, and X11 development libraries. + +On Fedora: + + # This may be outdated (see Ubuntu example above, for a more thorough list) + sudo yum install git automake libconfuse-devel vte3-devel gtk3-devel glib-devel gettext-devel + +The dependencies section above is complete but the sample command may not be complete, depending on your system you may need to +install additional packages. Please carefully read the output of the `autogen.sh` (see below) for more information of what +you need to install. + +## Compiling + +Generally if you have installed the development packages (e.g. *-dev or *-devel) of +the dependencies above and the autotools suite then it should be possible to compile with: + + mkdir build + cd build + ../autogen.sh --prefix=/usr + make --silent + +Changing to `build/` and calling autogen.sh relative from there +makes sure that we perform an out-of-tree build and all generated files are +stored inside `build/`. This way build artifacts will not clutter the +source directory. + +If you get the following error message, then you are missing the autopoint binary which is part of the autotools suite. On Ubuntu the +`dh-autoreconf` package installs it along with automake, autoconf and autoreconf. + + Can't exec "autopoint": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 345. + +You do not need the `--silent` option, but I prefer to use it to reduce the output a bit. If you experience any problem during build, +then drop the `--silent` option. + +## Installing + +After you have compiled the package run the following command to install tilda to the prefix that you have chosen +before: + + sudo make install + +If you don't want to install to the `/usr` prefix, choose some other prefix when you run the `autogen.sh` script, +such as `/opt/tilda` and add it to your path. + +# Packaging for Debian + +This section explains how to package Tilda for Debian and Debian derived distributions. + +## Preparation before building the package + +In order to build a package which can be uploaded to some +Debian based distribution the following steps are necessary. +Replace '#' with the number of the current minor release. + + 1. Check out the latest stable branch (e.g. tilda-1-2) + and commit any changes or patches which you want to include, + then commit these changes. + 2. Change into the `po/` folder and run `make update-po`. + 3. Update the changelog with a message such as: + "Update the change log for 1.2.#" + 4. Update the version number in configure.ac and make + a commit with the version number: + "1.2.#" + 5. Create a tarball using git-archive: + + git archive --prefix=tilda-1.2.#/ -o ../tilda_1.2.#.orig.tar.gz HEAD + + 6. Checkout the [packaging files for tilda][1] and update the change log at + `debian/changelog` such that it contains an entry for the latest version + of tilda. Note: the `debian/changelog` should not contain information about + tilda specific changes but about changes related to the Debian packaging. + +# Building a package + +With the above `git archive` command you get a tarball +from which a Debian package can be build. A Debian package +consists of a separate source and binary package. The following steps +document the basic commands that are required to build both the source package +and the binary package, to verify that both are correct and to +upload the source package to *mentors.debian.org*. + +I am using **pbuilder** to build the source and binary packages. +Please refer to the man pages **pbuilder(8)** on howto +setup the base image. I also use **pdebuild** as a convenient script to +run `debuild` inside the **pbuilder** environment (see **pdebuild(1)**). + + 1. `cd ..; tar -xf tilda_1.2.#.orig.tar.gz` + 2. `cd tilda-1.2.#` + 3. Checkout the `tilda-debian` repository from Github and copy the `debian/` folder + to `tilda-1.2.#/`. + 5. To build the source package you need to run **debuild**. You can use one of + the following two methods to do this: + * Run **debuild** inside a change root by using `pdebuild`: + + sudo pdebuild --use-pdebuild-internal \ + -- --basetgz ~/pbuilder/unstable-base.tgz + * Run `debuild` directly from the current folder (e.g. from `tilda-1.#.#/`) + + 6. If `debuild` finishes without a problem next run `pbuilder`, this will verify that + the packge is buildable (without warnings or errors) in a clean environment: + + sudo pbuilder --build --basetgz ~/pbuilder/unstable-base.tgz tilda_1.2.#-1.dsc + + 7. Run `debsign` to sign the package with your PGP key: + + debsign tilda_1.#.#-1_amd64.changes + + 8. If `pbuilder` does not complain and you don not see any warnings in `lintian`, then + upload the package to mentors: + + dput mentors tilda_1.#.#-1_amd64.changes + +[1]: https://salsa.debian.org/debian/tilda/ Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/images/tilda_appearance-16-9.png and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/images/tilda_appearance-16-9.png differ Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/images/tilda_colors-16-9.png and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/images/tilda_colors-16-9.png differ Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/images/tilda_general-16-9.png and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/images/tilda_general-16-9.png differ Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/images/tilda_keybindings-16-9.png and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/images/tilda_keybindings-16-9.png differ Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/images/tilda_terminal_with_search_bar.png and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/images/tilda_terminal_with_search_bar.png differ Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/images/tilda_title_and_command-16-9.png and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/images/tilda_title_and_command-16-9.png differ diff -Nru tilda-1.5.2/m4/gettext.m4 tilda-1.5.4/m4/gettext.m4 --- tilda-1.5.2/m4/gettext.m4 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/m4/gettext.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,383 +0,0 @@ -# gettext.m4 serial 63 (gettext-0.18) -dnl Copyright (C) 1995-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2006, 2008-2010. - -dnl Macro to add for using GNU gettext. - -dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). -dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The -dnl default (if it is not specified or empty) is 'no-libtool'. -dnl INTLSYMBOL should be 'external' for packages with no intl directory, -dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. -dnl If INTLSYMBOL is 'use-libtool', then a libtool library -dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, -dnl depending on --{enable,disable}-{shared,static} and on the presence of -dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library -dnl $(top_builddir)/intl/libintl.a will be created. -dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext -dnl implementations (in libc or libintl) without the ngettext() function -dnl will be ignored. If NEEDSYMBOL is specified and is -dnl 'need-formatstring-macros', then GNU gettext implementations that don't -dnl support the ISO C 99 formatstring macros will be ignored. -dnl INTLDIR is used to find the intl libraries. If empty, -dnl the value `$(top_builddir)/intl/' is used. -dnl -dnl The result of the configuration is one of three cases: -dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled -dnl and used. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 2) GNU gettext has been found in the system's C library. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 3) No internationalization, always use English msgid. -dnl Catalog format: none -dnl Catalog extension: none -dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. -dnl The use of .gmo is historical (it was needed to avoid overwriting the -dnl GNU format catalogs when building on a platform with an X/Open gettext), -dnl but we keep it in order not to force irrelevant filename changes on the -dnl maintainers. -dnl -AC_DEFUN([AM_GNU_GETTEXT], -[ - dnl Argument checking. - ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , - [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT -])])])])]) - ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old], - [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])]) - ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , - [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT -])])])]) - define([gt_included_intl], - ifelse([$1], [external], - ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]), - [yes])) - define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], [])) - gt_NEEDS_INIT - AM_GNU_GETTEXT_NEED([$2]) - - AC_REQUIRE([AM_PO_SUBDIRS])dnl - ifelse(gt_included_intl, yes, [ - AC_REQUIRE([AM_INTL_SUBDIR])dnl - ]) - - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Sometimes libintl requires libiconv, so first search for libiconv. - dnl Ideally we would do this search only after the - dnl if test "$USE_NLS" = "yes"; then - dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT - dnl the configure script would need to contain the same shell code - dnl again, outside any 'if'. There are two solutions: - dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. - dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. - dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not - dnl documented, we avoid it. - ifelse(gt_included_intl, yes, , [ - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - ]) - - dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation. - gt_INTL_MACOSX - - dnl Set USE_NLS. - AC_REQUIRE([AM_NLS]) - - ifelse(gt_included_intl, yes, [ - BUILD_INCLUDED_LIBINTL=no - USE_INCLUDED_LIBINTL=no - ]) - LIBINTL= - LTLIBINTL= - POSUB= - - dnl Add a version number to the cache macros. - case " $gt_needs " in - *" need-formatstring-macros "*) gt_api_version=3 ;; - *" need-ngettext "*) gt_api_version=2 ;; - *) gt_api_version=1 ;; - esac - gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" - gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" - - dnl If we use NLS figure out what method - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - ifelse(gt_included_intl, yes, [ - AC_MSG_CHECKING([whether included gettext is requested]) - AC_ARG_WITH([included-gettext], - [ --with-included-gettext use the GNU gettext library included here], - nls_cv_force_use_gnu_gettext=$withval, - nls_cv_force_use_gnu_gettext=no) - AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext]) - - nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" - if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - ]) - dnl User does not insist on using GNU NLS library. Figure out what - dnl to use. If GNU gettext is available we use this. Else we have - dnl to fall back to GNU NLS library. - - if test $gt_api_version -ge 3; then - gt_revision_test_code=' -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -changequote(,)dnl -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -changequote([,])dnl -' - else - gt_revision_test_code= - fi - if test $gt_api_version -ge 2; then - gt_expression_test_code=' + * ngettext ("", "", 0)' - else - gt_expression_test_code= - fi - - AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc], - [AC_TRY_LINK([#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings;], - [bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings], - [eval "$gt_func_gnugettext_libc=yes"], - [eval "$gt_func_gnugettext_libc=no"])]) - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl Sometimes libintl requires libiconv, so first search for libiconv. - ifelse(gt_included_intl, yes, , [ - AM_ICONV_LINK - ]) - dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL - dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) - dnl because that would add "-liconv" to LIBINTL and LTLIBINTL - dnl even if libiconv doesn't exist. - AC_LIB_LINKFLAGS_BODY([intl]) - AC_CACHE_CHECK([for GNU gettext in libintl], - [$gt_func_gnugettext_libintl], - [gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - dnl Now see whether libintl exists and does not depend on libiconv. - AC_TRY_LINK([#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *);], - [bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")], - [eval "$gt_func_gnugettext_libintl=yes"], - [eval "$gt_func_gnugettext_libintl=no"]) - dnl Now see whether libintl exists and depends on libiconv. - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - AC_TRY_LINK([#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *);], - [bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")], - [LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - eval "$gt_func_gnugettext_libintl=yes" - ]) - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS"]) - fi - - dnl If an already present or preinstalled GNU gettext() is found, - dnl use it. But if this macro is used in GNU gettext, and GNU - dnl gettext is already preinstalled in libintl, we update this - dnl libintl. (Cf. the install rule in intl/Makefile.in.) - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ - || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools; }; then - gt_use_preinstalled_gnugettext=yes - else - dnl Reset the values set by searching for libintl. - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - ifelse(gt_included_intl, yes, [ - if test "$gt_use_preinstalled_gnugettext" != "yes"; then - dnl GNU gettext is not found in the C library. - dnl Fall back on included GNU gettext library. - nls_cv_use_gnu_gettext=yes - fi - fi - - if test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions used to generate GNU NLS library. - BUILD_INCLUDED_LIBINTL=yes - USE_INCLUDED_LIBINTL=yes - LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD" - LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD" - LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` - fi - - CATOBJEXT= - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions to use GNU gettext tools. - CATOBJEXT=.gmo - fi - ]) - - if test -n "$INTL_MACOSX_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Some extra flags are needed during linking. - LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" - fi - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - AC_DEFINE([ENABLE_NLS], [1], - [Define to 1 if translation of program messages to the user's native language - is requested.]) - else - USE_NLS=no - fi - fi - - AC_MSG_CHECKING([whether to use NLS]) - AC_MSG_RESULT([$USE_NLS]) - if test "$USE_NLS" = "yes"; then - AC_MSG_CHECKING([where the gettext function comes from]) - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - AC_MSG_RESULT([$gt_source]) - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - AC_MSG_CHECKING([how to link with libintl]) - AC_MSG_RESULT([$LIBINTL]) - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) - fi - - dnl For backward compatibility. Some packages may be using this. - AC_DEFINE([HAVE_GETTEXT], [1], - [Define if the GNU gettext() function is already present or preinstalled.]) - AC_DEFINE([HAVE_DCGETTEXT], [1], - [Define if the GNU dcgettext() function is already present or preinstalled.]) - fi - - dnl We need to process the po/ directory. - POSUB=po - fi - - ifelse(gt_included_intl, yes, [ - dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL - dnl to 'yes' because some of the testsuite requires it. - if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then - BUILD_INCLUDED_LIBINTL=yes - fi - - dnl Make all variables we use known to autoconf. - AC_SUBST([BUILD_INCLUDED_LIBINTL]) - AC_SUBST([USE_INCLUDED_LIBINTL]) - AC_SUBST([CATOBJEXT]) - - dnl For backward compatibility. Some configure.ins may be using this. - nls_cv_header_intl= - nls_cv_header_libgt= - - dnl For backward compatibility. Some Makefiles may be using this. - DATADIRNAME=share - AC_SUBST([DATADIRNAME]) - - dnl For backward compatibility. Some Makefiles may be using this. - INSTOBJEXT=.mo - AC_SUBST([INSTOBJEXT]) - - dnl For backward compatibility. Some Makefiles may be using this. - GENCAT=gencat - AC_SUBST([GENCAT]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLOBJS= - if test "$USE_INCLUDED_LIBINTL" = yes; then - INTLOBJS="\$(GETTOBJS)" - fi - AC_SUBST([INTLOBJS]) - - dnl Enable libtool support if the surrounding package wishes it. - INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix - AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX]) - ]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLLIBS="$LIBINTL" - AC_SUBST([INTLLIBS]) - - dnl Make all documented variables known to autoconf. - AC_SUBST([LIBINTL]) - AC_SUBST([LTLIBINTL]) - AC_SUBST([POSUB]) -]) - - -dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized. -m4_define([gt_NEEDS_INIT], -[ - m4_divert_text([DEFAULTS], [gt_needs=]) - m4_define([gt_NEEDS_INIT], []) -]) - - -dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL]) -AC_DEFUN([AM_GNU_GETTEXT_NEED], -[ - m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"]) -]) - - -dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) -AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) diff -Nru tilda-1.5.2/m4/iconv.m4 tilda-1.5.4/m4/iconv.m4 --- tilda-1.5.2/m4/iconv.m4 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/m4/iconv.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,214 +0,0 @@ -# iconv.m4 serial 11 (gettext-0.18.1) -dnl Copyright (C) 2000-2002, 2007-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], -[ - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([iconv]) -]) - -AC_DEFUN([AM_ICONV_LINK], -[ - dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and - dnl those with the standalone portable GNU libiconv installed). - AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - - dnl Add $INCICONV to CPPFLAGS before performing the following checks, - dnl because if the user has installed libiconv and not disabled its use - dnl via --without-libiconv-prefix, he wants to use it. The first - dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed. - am_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) - - AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [ - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - AC_TRY_LINK([#include -#include ], - [iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);], - [am_cv_func_iconv=yes]) - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - AC_TRY_LINK([#include -#include ], - [iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);], - [am_cv_lib_iconv=yes] - [am_cv_func_iconv=yes]) - LIBS="$am_save_LIBS" - fi - ]) - if test "$am_cv_func_iconv" = yes; then - AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [ - dnl This tests against bugs in AIX 5.1, HP-UX 11.11, Solaris 10. - am_save_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - AC_TRY_RUN([ -#include -#include -int main () -{ - /* Test against AIX 5.1 bug: Failures are not distinguishable from successful - returns. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static const char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - return 1; - } - } - /* Test against Solaris 10 bug: Failures are not distinguishable from - successful returns. */ - { - iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); - if (cd_ascii_to_88591 != (iconv_t)(-1)) - { - static const char input[] = "\263"; - char buf[10]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_ascii_to_88591, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - return 1; - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - return 1; - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - if (/* Try standardized names. */ - iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) - /* Try IRIX, OSF/1 names. */ - && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) - /* Try AIX names. */ - && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) - /* Try HP-UX names. */ - && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) - return 1; - return 0; -}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no], - [case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac]) - LIBS="$am_save_LIBS" - ]) - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - AC_DEFINE([HAVE_ICONV], [1], - [Define if you have the iconv() function and it works.]) - fi - if test "$am_cv_lib_iconv" = yes; then - AC_MSG_CHECKING([how to link with libiconv]) - AC_MSG_RESULT([$LIBICONV]) - else - dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV - dnl either. - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - AC_SUBST([LIBICONV]) - AC_SUBST([LTLIBICONV]) -]) - -dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to -dnl avoid warnings like -dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required". -dnl This is tricky because of the way 'aclocal' is implemented: -dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN. -dnl Otherwise aclocal's initial scan pass would miss the macro definition. -dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions. -dnl Otherwise aclocal would emit many "Use of uninitialized value $1" -dnl warnings. -m4_define([gl_iconv_AC_DEFUN], - m4_version_prereq([2.64], - [[AC_DEFUN_ONCE( - [$1], [$2])]], - [[AC_DEFUN( - [$1], [$2])]])) -gl_iconv_AC_DEFUN([AM_ICONV], -[ - AM_ICONV_LINK - if test "$am_cv_func_iconv" = yes; then - AC_MSG_CHECKING([for iconv declaration]) - AC_CACHE_VAL([am_cv_proto_iconv], [ - AC_TRY_COMPILE([ -#include -#include -extern -#ifdef __cplusplus -"C" -#endif -#if defined(__STDC__) || defined(__cplusplus) -size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); -#else -size_t iconv(); -#endif -], [], [am_cv_proto_iconv_arg1=""], [am_cv_proto_iconv_arg1="const"]) - am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) - am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` - AC_MSG_RESULT([ - $am_cv_proto_iconv]) - AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1], - [Define as const if the declaration of iconv() needs const.]) - fi -]) diff -Nru tilda-1.5.2/m4/intlmacosx.m4 tilda-1.5.4/m4/intlmacosx.m4 --- tilda-1.5.2/m4/intlmacosx.m4 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/m4/intlmacosx.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,51 +0,0 @@ -# intlmacosx.m4 serial 3 (gettext-0.18) -dnl Copyright (C) 2004-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Checks for special options needed on MacOS X. -dnl Defines INTL_MACOSX_LIBS. -AC_DEFUN([gt_INTL_MACOSX], -[ - dnl Check for API introduced in MacOS X 10.2. - AC_CACHE_CHECK([for CFPreferencesCopyAppValue], - [gt_cv_func_CFPreferencesCopyAppValue], - [gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - AC_TRY_LINK([#include ], - [CFPreferencesCopyAppValue(NULL, NULL)], - [gt_cv_func_CFPreferencesCopyAppValue=yes], - [gt_cv_func_CFPreferencesCopyAppValue=no]) - LIBS="$gt_save_LIBS"]) - if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then - AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1], - [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.]) - fi - dnl Check for API introduced in MacOS X 10.3. - AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent], - [gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - AC_TRY_LINK([#include ], [CFLocaleCopyCurrent();], - [gt_cv_func_CFLocaleCopyCurrent=yes], - [gt_cv_func_CFLocaleCopyCurrent=no]) - LIBS="$gt_save_LIBS"]) - if test $gt_cv_func_CFLocaleCopyCurrent = yes; then - AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1], - [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.]) - fi - INTL_MACOSX_LIBS= - if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then - INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" - fi - AC_SUBST([INTL_MACOSX_LIBS]) -]) diff -Nru tilda-1.5.2/m4/lib-ld.m4 tilda-1.5.4/m4/lib-ld.m4 --- tilda-1.5.2/m4/lib-ld.m4 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/m4/lib-ld.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,110 +0,0 @@ -# lib-ld.m4 serial 4 (gettext-0.18) -dnl Copyright (C) 1996-2003, 2009-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl Subroutines of libtool.m4, -dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision -dnl with libtool.m4. - -dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. -AC_DEFUN([AC_LIB_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld], -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -case `$LD -v 2>&1 conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]* | [A-Za-z]:[\\/]*)] - [re_direlt='/[^/][^/]*/\.\./'] - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL([acl_cv_path_LD], -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break ;; - *) - test "$with_gnu_ld" != yes && break ;; - esac - fi - done - IFS="$ac_save_ifs" -else - acl_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$acl_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT([$LD]) -else - AC_MSG_RESULT([no]) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_LIB_PROG_LD_GNU -]) diff -Nru tilda-1.5.2/m4/lib-link.m4 tilda-1.5.4/m4/lib-link.m4 --- tilda-1.5.2/m4/lib-link.m4 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/m4/lib-link.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,774 +0,0 @@ -# lib-link.m4 serial 21 (gettext-0.18) -dnl Copyright (C) 2001-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -AC_PREREQ([2.54]) - -dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and -dnl augments the CPPFLAGS variable. -dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname -dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - pushdef([Name],[translit([$1],[./-], [___])]) - pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - ac_cv_lib[]Name[]_libs="$LIB[]NAME" - ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" - ac_cv_lib[]Name[]_cppflags="$INC[]NAME" - ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX" - ]) - LIB[]NAME="$ac_cv_lib[]Name[]_libs" - LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" - INC[]NAME="$ac_cv_lib[]Name[]_cppflags" - LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - AC_SUBST([LIB]NAME[_PREFIX]) - dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the - dnl results of this search when this library appears as a dependency. - HAVE_LIB[]NAME=yes - popdef([NAME]) - popdef([Name]) -]) - -dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message]) -dnl searches for libname and the libraries corresponding to explicit and -dnl implicit dependencies, together with the specified include files and -dnl the ability to compile and link the specified testcode. The missing-message -dnl defaults to 'no' and may contain additional hints for the user. -dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} -dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and -dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs -dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. -dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname -dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - pushdef([Name],[translit([$1],[./-], [___])]) - pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - - dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - - dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, - dnl because if the user has installed lib[]Name and not disabled its use - dnl via --without-lib[]Name-prefix, he wants to use it. - ac_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - - AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ - ac_save_LIBS="$LIBS" - dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS, - dnl because these -l options might require -L options that are present in - dnl LIBS. -l options benefit only from the -L options listed before it. - dnl Otherwise, add it to the front of LIBS, because it may be a static - dnl library that depends on another static library that is present in LIBS. - dnl Static libraries benefit only from the static libraries listed after - dnl it. - case " $LIB[]NAME" in - *" -l"*) LIBS="$LIBS $LIB[]NAME" ;; - *) LIBS="$LIB[]NAME $LIBS" ;; - esac - AC_TRY_LINK([$3], [$4], - [ac_cv_lib[]Name=yes], - [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])']) - LIBS="$ac_save_LIBS" - ]) - if test "$ac_cv_lib[]Name" = yes; then - HAVE_LIB[]NAME=yes - AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.]) - AC_MSG_CHECKING([how to link with lib[]$1]) - AC_MSG_RESULT([$LIB[]NAME]) - else - HAVE_LIB[]NAME=no - dnl If $LIB[]NAME didn't lead to a usable library, we don't need - dnl $INC[]NAME either. - CPPFLAGS="$ac_save_CPPFLAGS" - LIB[]NAME= - LTLIB[]NAME= - LIB[]NAME[]_PREFIX= - fi - AC_SUBST([HAVE_LIB]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - AC_SUBST([LIB]NAME[_PREFIX]) - popdef([NAME]) - popdef([Name]) -]) - -dnl Determine the platform dependent parameters needed to use rpath: -dnl acl_libext, -dnl acl_shlibext, -dnl acl_hardcode_libdir_flag_spec, -dnl acl_hardcode_libdir_separator, -dnl acl_hardcode_direct, -dnl acl_hardcode_minus_L. -AC_DEFUN([AC_LIB_RPATH], -[ - dnl Tell automake >= 1.10 to complain if config.rpath is missing. - m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) - AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS - AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld - AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host - AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir - AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [ - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - ]) - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - dnl Determine whether the user wants rpath handling at all. - AC_ARG_ENABLE([rpath], - [ --disable-rpath do not hardcode runtime library paths], - :, enable_rpath=yes) -]) - -dnl AC_LIB_FROMPACKAGE(name, package) -dnl declares that libname comes from the given package. The configure file -dnl will then not have a --with-libname-prefix option but a -dnl --with-package-prefix option. Several libraries can come from the same -dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar -dnl macro call that searches for libname. -AC_DEFUN([AC_LIB_FROMPACKAGE], -[ - pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - define([acl_frompackage_]NAME, [$2]) - popdef([NAME]) - pushdef([PACK],[$2]) - pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - define([acl_libsinpackage_]PACKUP, - m4_ifdef([acl_libsinpackage_]PACKUP, [acl_libsinpackage_]PACKUP[[, ]],)[lib$1]) - popdef([PACKUP]) - popdef([PACK]) -]) - -dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. -dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found -dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_LINKFLAGS_BODY], -[ - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])]) - pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])]) - dnl Autoconf >= 2.61 supports dots in --with options. - pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit(PACK,[.],[_])],PACK)]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_ARG_WITH(P_A_C_K[-prefix], -[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib - --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - if test "$acl_libdirstem2" != "$acl_libdirstem" \ - && ! test -d "$withval/$acl_libdirstem"; then - additional_libdir="$withval/$acl_libdirstem2" - fi - fi - fi -]) - dnl Search the library and its dependencies in $additional_libdir and - dnl $LDFLAGS. Using breadth-first-seach. - LIB[]NAME= - LTLIB[]NAME= - INC[]NAME= - LIB[]NAME[]_PREFIX= - dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been - dnl computed. So it has to be reset here. - HAVE_LIB[]NAME= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='$1 $2' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - dnl See if it was already located by an earlier AC_LIB_LINKFLAGS - dnl or AC_LIB_HAVE_LINKFLAGS call. - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" - else - dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined - dnl that this library doesn't exist. So just drop it. - : - fi - else - dnl Search the library lib$name in $additional_libdir and $LDFLAGS - dnl and the already constructed $LIBNAME/$LTLIBNAME. - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - dnl The same code as in the loop below: - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - dnl Found the library. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - dnl Linking with a shared library. We attempt to hardcode its - dnl directory into the executable's runpath, unless it's the - dnl standard /usr/lib. - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then - dnl No hardcoding is needed. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - dnl The hardcoding into $LIBNAME is system dependent. - if test "$acl_hardcode_direct" = yes; then - dnl Using DIR/libNAME.so during linking hardcodes DIR into the - dnl resulting binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - dnl Rely on "-L$found_dir". - dnl But don't add it if it's already contained in the LDFLAGS - dnl or the already constructed $LIBNAME - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH - dnl here, because this doesn't fit in flags passed to the - dnl compiler. So give up. No hardcoding. This affects only - dnl very old systems. - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - dnl Linking with a static library. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" - else - dnl We shouldn't come here, but anyway it's good to have a - dnl fallback. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" - fi - fi - dnl Assume the include files are nearby. - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = '$1'; then - LIB[]NAME[]_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = '$1'; then - LIB[]NAME[]_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - dnl Potentially add $additional_includedir to $INCNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's /usr/local/include and we are using GCC on Linux, - dnl 3. if it's already present in $CPPFLAGS or the already - dnl constructed $INCNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INC[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $INCNAME. - INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - dnl Look for dependencies. - if test -n "$found_la"; then - dnl Read the .la file. It defines the variables - dnl dlname, library_names, old_library, dependency_libs, current, - dnl age, revision, installed, dlopen, dlpreopen, libdir. - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - dnl We use only dependency_libs. - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's /usr/local/lib and we are using GCC on Linux, - dnl 3. if it's already present in $LDFLAGS or the already - dnl constructed $LIBNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LIBNAME. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LTLIBNAME. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dnl Handle this in the next round. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - dnl Handle this in the next round. Throw away the .la's - dnl directory; it is already contained in a preceding -L - dnl option. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - dnl Most likely an immediate library name. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" - ;; - esac - done - fi - else - dnl Didn't find the library; assume it is in the system directories - dnl known to the linker and runtime loader. (All the system - dnl directories known to the linker should also be known to the - dnl runtime loader, otherwise the system is severely misconfigured.) - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user must - dnl pass all path elements in one option. We can arrange that for a - dnl single library, but not when more than one $LIBNAMEs are used. - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - else - dnl The -rpath options are cumulative. - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - dnl When using libtool, the option that works for both libraries and - dnl executables is -R. The -R options are cumulative. - for found_dir in $ltrpathdirs; do - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" - done - fi - popdef([P_A_C_K]) - popdef([PACKLIBS]) - popdef([PACKUP]) - popdef([PACK]) - popdef([NAME]) -]) - -dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, -dnl unless already present in VAR. -dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes -dnl contains two or three consecutive elements that belong together. -AC_DEFUN([AC_LIB_APPENDTOVAR], -[ - for element in [$2]; do - haveit= - for x in $[$1]; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - [$1]="${[$1]}${[$1]:+ }$element" - fi - done -]) - -dnl For those cases where a variable contains several -L and -l options -dnl referring to unknown libraries and directories, this macro determines the -dnl necessary additional linker options for the runtime path. -dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) -dnl sets LDADDVAR to linker options needed together with LIBSVALUE. -dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, -dnl otherwise linking without libtool is assumed. -AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], -[ - AC_REQUIRE([AC_LIB_RPATH]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - $1= - if test "$enable_rpath" != no; then - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode directories into the resulting - dnl binary. - rpathdirs= - next= - for opt in $2; do - if test -n "$next"; then - dir="$next" - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem" \ - && test "X$dir" != "X/usr/$acl_libdirstem2"; then - rpathdirs="$rpathdirs $dir" - fi - next= - else - case $opt in - -L) next=yes ;; - -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem" \ - && test "X$dir" != "X/usr/$acl_libdirstem2"; then - rpathdirs="$rpathdirs $dir" - fi - next= ;; - *) next= ;; - esac - fi - done - if test "X$rpathdirs" != "X"; then - if test -n ""$3""; then - dnl libtool is used for linking. Use -R options. - for dir in $rpathdirs; do - $1="${$1}${$1:+ }-R$dir" - done - else - dnl The linker is used for linking directly. - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user - dnl must pass all path elements in one option. - alldirs= - for dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="$flag" - else - dnl The -rpath options are cumulative. - for dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="${$1}${$1:+ }$flag" - done - fi - fi - fi - fi - fi - AC_SUBST([$1]) -]) diff -Nru tilda-1.5.2/m4/lib-prefix.m4 tilda-1.5.4/m4/lib-prefix.m4 --- tilda-1.5.2/m4/lib-prefix.m4 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/m4/lib-prefix.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,224 +0,0 @@ -# lib-prefix.m4 serial 7 (gettext-0.18) -dnl Copyright (C) 2001-2005, 2008-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and -dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't -dnl require excessive bracketing. -ifdef([AC_HELP_STRING], -[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], -[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) - -dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed -dnl to access previously installed libraries. The basic assumption is that -dnl a user will want packages to use other packages he previously installed -dnl with the same --prefix option. -dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate -dnl libraries, but is otherwise very convenient. -AC_DEFUN([AC_LIB_PREFIX], -[ - AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib-prefix], -[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib - --without-lib-prefix don't search for libraries in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - fi - fi -]) - if test $use_additional = yes; then - dnl Potentially add $additional_includedir to $CPPFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's already present in $CPPFLAGS, - dnl 3. if it's /usr/local/include and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - for x in $CPPFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $CPPFLAGS. - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" - fi - fi - fi - fi - dnl Potentially add $additional_libdir to $LDFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's already present in $LDFLAGS, - dnl 3. if it's /usr/local/lib and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then - haveit= - for x in $LDFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LDFLAGS. - LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" - fi - fi - fi - fi - fi -]) - -dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, -dnl acl_final_exec_prefix, containing the values to which $prefix and -dnl $exec_prefix will expand at the end of the configure script. -AC_DEFUN([AC_LIB_PREPARE_PREFIX], -[ - dnl Unfortunately, prefix and exec_prefix get only finally determined - dnl at the end of configure. - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the -dnl variables prefix and exec_prefix bound to the values they will have -dnl at the end of the configure script. -AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], -[ - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - $1 - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_PREPARE_MULTILIB creates -dnl - a variable acl_libdirstem, containing the basename of the libdir, either -dnl "lib" or "lib64" or "lib/64", -dnl - a variable acl_libdirstem2, as a secondary possible value for -dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or -dnl "lib/amd64". -AC_DEFUN([AC_LIB_PREPARE_MULTILIB], -[ - dnl There is no formal standard regarding lib and lib64. - dnl On glibc systems, the current practice is that on a system supporting - dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under - dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine - dnl the compiler's default mode by looking at the compiler's library search - dnl path. If at least one of its elements ends in /lib64 or points to a - dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI. - dnl Otherwise we use the default, namely "lib". - dnl On Solaris systems, the current practice is that on a system supporting - dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under - dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or - dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib. - AC_REQUIRE([AC_CANONICAL_HOST]) - acl_libdirstem=lib - acl_libdirstem2= - case "$host_os" in - solaris*) - dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment - dnl . - dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link." - dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the - dnl symlink is missing, so we set acl_libdirstem2 too. - AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit], - [AC_EGREP_CPP([sixtyfour bits], [ -#ifdef _LP64 -sixtyfour bits -#endif - ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no]) - ]) - if test $gl_cv_solaris_64bit = yes; then - acl_libdirstem=lib/64 - case "$host_cpu" in - sparc*) acl_libdirstem2=lib/sparcv9 ;; - i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; - esac - fi - ;; - *) - searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test -n "$searchpath"; then - acl_save_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; - */../ | */.. ) - # Better ignore directories of this form. They are misleading. - ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib64 ) acl_libdirstem=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_save_IFS" - fi - ;; - esac - test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" -]) diff -Nru tilda-1.5.2/m4/nls.m4 tilda-1.5.4/m4/nls.m4 --- tilda-1.5.2/m4/nls.m4 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/m4/nls.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ -# nls.m4 serial 5 (gettext-0.18) -dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation, -dnl Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_PREREQ([2.50]) - -AC_DEFUN([AM_NLS], -[ - AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE([nls], - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT([$USE_NLS]) - AC_SUBST([USE_NLS]) -]) diff -Nru tilda-1.5.2/m4/po.m4 tilda-1.5.4/m4/po.m4 --- tilda-1.5.2/m4/po.m4 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/m4/po.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,449 +0,0 @@ -# po.m4 serial 17 (gettext-0.18) -dnl Copyright (C) 1995-2010 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_PREREQ([2.50]) - -dnl Checks for all prerequisites of the po subdirectory. -AC_DEFUN([AM_PO_SUBDIRS], -[ - AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl - AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake - AC_REQUIRE([AM_NLS])dnl - - dnl Release version of the gettext macros. This is used to ensure that - dnl the gettext macros and po/Makefile.in.in are in sync. - AC_SUBST([GETTEXT_MACRO_VERSION], [0.18]) - - dnl Perform the following tests also if --disable-nls has been given, - dnl because they are needed for "make dist" to work. - - dnl Search for GNU msgfmt in the PATH. - dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. - dnl The second test excludes FreeBSD msgfmt. - AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT]) - - dnl Test whether it is GNU msgfmt >= 0.15. -changequote(,)dnl - case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; - *) MSGFMT_015=$MSGFMT ;; - esac -changequote([,])dnl - AC_SUBST([MSGFMT_015]) -changequote(,)dnl - case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; - *) GMSGFMT_015=$GMSGFMT ;; - esac -changequote([,])dnl - AC_SUBST([GMSGFMT_015]) - - dnl Search for GNU xgettext 0.12 or newer in the PATH. - dnl The first test excludes Solaris xgettext and early GNU xgettext versions. - dnl The second test excludes FreeBSD xgettext. - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - dnl Remove leftover from FreeBSD xgettext call. - rm -f messages.po - - dnl Test whether it is GNU xgettext >= 0.15. -changequote(,)dnl - case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; - *) XGETTEXT_015=$XGETTEXT ;; - esac -changequote([,])dnl - AC_SUBST([XGETTEXT_015]) - - dnl Search for GNU msgmerge 0.11 or newer in the PATH. - AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, - [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :) - - dnl Installation directories. - dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we - dnl have to define it here, so that it can be used in po/Makefile. - test -n "$localedir" || localedir='${datadir}/locale' - AC_SUBST([localedir]) - - dnl Support for AM_XGETTEXT_OPTION. - test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= - AC_SUBST([XGETTEXT_EXTRA_OPTIONS]) - - AC_CONFIG_COMMANDS([po-directories], [[ - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - # Treat a directory as a PO directory if and only if it has a - # POTFILES.in file. This allows packages to have multiple PO - # directories under different names or in different locations. - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done]], - [# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it - # from automake < 1.5. - eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - ]) -]) - -dnl Postprocesses a Makefile in a directory containing PO files. -AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], -[ - # When this code is run, in config.status, two variables have already been - # set: - # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in, - # - LINGUAS is the value of the environment variable LINGUAS at configure - # time. - -changequote(,)dnl - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - # Find a way to echo strings without interpreting backslash. - if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='echo' - else - if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='printf %s\n' - else - echo_func () { - cat < "$ac_file.tmp" - if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` - cat >> "$ac_file.tmp" < /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` - cat >> "$ac_file.tmp" <> "$ac_file.tmp" <, 1996. - -AC_PREREQ([2.50]) - -# Search path for a program which passes the given test. - -dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST], -[ -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL([ac_cv_path_$1], -[case "[$]$1" in - [[\\/]]* | ?:[[\\/]]*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in ifelse([$5], , $PATH, [$5]); do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then - AC_MSG_RESULT([$][$1]) -else - AC_MSG_RESULT([no]) -fi -AC_SUBST([$1])dnl -]) diff -Nru tilda-1.5.2/Makefile.in tilda-1.5.4/Makefile.in --- tilda-1.5.2/Makefile.in 2020-05-10 14:15:45.000000000 +0000 +++ tilda-1.5.4/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,1477 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# vim: set noexpandtab ts=8 sts=8 sw=8: - -# vim: set noexpandtab ts=8 sts=8 sw=8: - - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -bin_PROGRAMS = src/tilda$(EXEEXT) -subdir = . -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \ - $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ - $(am__configure_deps) $(am__DIST_COMMON) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = tilda-config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(Appdatadir)" \ - "$(DESTDIR)$(Applicationsdir)" "$(DESTDIR)$(Pixmapsdir)" -PROGRAMS = $(bin_PROGRAMS) -am__dirstamp = $(am__leading_dot)dirstamp -am__objects_1 = -am__objects_2 = src/src_tilda-glade-resources.$(OBJEXT) \ - src/src_tilda-tilda-enum-types.$(OBJEXT) $(am__objects_1) -am_src_tilda_OBJECTS = $(am__objects_2) \ - src/src_tilda-configsys.$(OBJEXT) \ - src/src_tilda-eggaccelerators.$(OBJEXT) \ - src/src_tilda-key_grabber.$(OBJEXT) \ - src/src_tilda-screen-size.$(OBJEXT) \ - src/src_tilda-tilda.$(OBJEXT) \ - src/src_tilda-tilda-keybinding.$(OBJEXT) \ - src/src_tilda-tilda-cli-options.$(OBJEXT) \ - src/src_tilda-tilda-palettes.$(OBJEXT) \ - src/src_tilda-tilda-search-box.$(OBJEXT) \ - src/src_tilda-tilda_terminal.$(OBJEXT) \ - src/src_tilda-tilda_window.$(OBJEXT) \ - src/src_tilda-tomboykeybinder.$(OBJEXT) \ - src/src_tilda-wizard.$(OBJEXT) src/src_tilda-xerror.$(OBJEXT) \ - $(am__objects_1) -src_tilda_OBJECTS = $(am_src_tilda_OBJECTS) -am__DEPENDENCIES_1 = -src_tilda_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) -src_tilda_LINK = $(CCLD) $(src_tilda_CFLAGS) $(CFLAGS) \ - $(src_tilda_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(src_tilda_SOURCES) -DIST_SOURCES = $(src_tilda_SOURCES) -RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ - ctags-recursive dvi-recursive html-recursive info-recursive \ - install-data-recursive install-dvi-recursive \ - install-exec-recursive install-html-recursive \ - install-info-recursive install-pdf-recursive \ - install-ps-recursive install-recursive installcheck-recursive \ - installdirs-recursive pdf-recursive ps-recursive \ - tags-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -DATA = $(Appdata_DATA) $(Applications_DATA) $(Pixmaps_DATA) -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -am__recursive_targets = \ - $(RECURSIVE_TARGETS) \ - $(RECURSIVE_CLEAN_TARGETS) \ - $(am__extra_recursive_targets) -AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - cscope distdir dist dist-all distcheck -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ - $(LISP)tilda-config.h.in -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -CSCOPE = cscope -DIST_SUBDIRS = $(SUBDIRS) -am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/src/Makefile.am \ - $(srcdir)/tilda-config.h.in $(top_srcdir)/build-aux/compile \ - $(top_srcdir)/build-aux/config.guess \ - $(top_srcdir)/build-aux/config.rpath \ - $(top_srcdir)/build-aux/config.sub \ - $(top_srcdir)/build-aux/depcomp \ - $(top_srcdir)/build-aux/install-sh \ - $(top_srcdir)/build-aux/missing ABOUT-NLS AUTHORS COPYING \ - ChangeLog NEWS build-aux/compile build-aux/config.guess \ - build-aux/config.rpath build-aux/config.sub build-aux/depcomp \ - build-aux/install-sh build-aux/missing -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__post_remove_distdir = $(am__remove_distdir) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -DIST_TARGETS = dist-gzip -distuninstallcheck_listfiles = find . -type f -print -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_MKENUMS = @GLIB_MKENUMS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GTK_CFLAGS = @GTK_CFLAGS@ -GTK_LIBS = @GTK_LIBS@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -LDFLAGS = @LDFLAGS@ -LIBCONFUSE_CFLAGS = @LIBCONFUSE_CFLAGS@ -LIBCONFUSE_LIBS = @LIBCONFUSE_LIBS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -POW_LIB = @POW_LIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -VTE_CFLAGS = @VTE_CFLAGS@ -VTE_LIBS = @VTE_LIBS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -runstatedir = @runstatedir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = po -CLEANFILES = tilda.desktop src/glade-resources.h src/glade-resources.c \ - src/tilda-enum-types.h src/tilda-enum-types.c $(NULL) -MAINTAINERCLEANFILES = \ - ABOUT-NLS \ - Makefile.in \ - aclocal.m4 \ - stamp-h1 \ - missing \ - install-sh \ - decomp \ - compile \ - INSTALL \ - m4/*.m4 \ - tilda-config.h \ - config.guess \ - config.rpath \ - config.sub \ - configure \ - depcomp \ - m4/Makefile.in \ - po/Makefile.in.in \ - po/Makevars.template \ - po/Rules-quot \ - po/boldquot.sed \ - po/en@boldquot.header \ - po/en@quot.header \ - po/insert-header.sin \ - po/quot.sed \ - po/remove-potcdate.sin \ - po/tilda.pot \ - tilda-config.h.in \ - tilda-config.h.in~ - -Applicationsdir = ${datadir}/applications -Applications_DATA = tilda.desktop -Appdatadir = ${datadir}/metainfo -Appdata_DATA = tilda.appdata.xml -Pixmapsdir = ${datadir}/pixmaps -Pixmaps_DATA = tilda.png -EXTRA_DIST = tilda.desktop.in tilda.png tilda.appdata.xml README.md \ - src/glade-resources.gresource.xml src/tilda-search-box.ui \ - src/menu.ui src/tilda.ui src/tilda-enum-types.h.template \ - src/tilda-enum-types.c.template $(NULL) -ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS} -NULL = -ENUM_TYPES = \ - $(srcdir)/src/tilda-search-box.h \ - $(NULL) - -src_tilda_CPPFLAGS = \ - $(AM_CPPFLAGS) \ - -I$(top_builddir)/src \ - -DG_LOG_DOMAIN='"tilda"' \ - -DG_LOG_USE_STRUCTURED \ - -DDATADIR='"$(datadir)"' \ - -DLOCALEDIR='"$(localedir)"' \ - -DPKGDATADIR='"$(pkgdatadir)"' \ - $(NULL) - -BUILT_SOURCES = \ - src/glade-resources.h src/glade-resources.c \ - src/tilda-enum-types.c src/tilda-enum-types.h \ - $(NULL) - - -# Keep the headers here so that make dist-bzip2 works -src_tilda_SOURCES = \ - $(BUILT_SOURCES) \ - src/configsys.h src/configsys.c \ - src/debug.h \ - src/eggaccelerators.h src/eggaccelerators.c \ - src/key_grabber.h src/key_grabber.c \ - src/screen-size.h src/screen-size.c \ - src/tilda.h src/tilda.c \ - src/tilda-keybinding.c src/tilda-keybinding.h \ - src/tilda-cli-options.c src/tilda-cli-options.h \ - src/tilda-palettes.h src/tilda-palettes.c \ - src/tilda-search-box.c src/tilda-search-box.h \ - src/tilda_terminal.h src/tilda_terminal.c \ - src/tilda_window.h src/tilda_window.c \ - src/tomboykeybinder.h src/tomboykeybinder.c \ - src/wizard.h src/wizard.c \ - src/xerror.h src/xerror.c \ - src/vte-util.h \ - $(NULL) - -src_tilda_CFLAGS = \ - $(AM_CFLAGS) \ - $(GTK_CFLAGS) \ - $(LIBGLADE_CFLAGS) \ - $(VTE_CFLAGS) \ - $(LIBCONFUSE_CFLAGS) \ - $(X11_CFLAGS) \ - $(NULL) - -src_tilda_LDFLAGS = \ - $(AM_LDFLAGS) \ - $(GTK_LDFLAGS) \ - $(LIBGLADE_LDFLAGS) \ - $(VTE_LDFLAGS) \ - $(LIBCONFUSE_LDFLAGS) \ - $(X11_LDFLAGS) \ - -Wl,--as-needed \ - $(NULL) - -src_tilda_LDADD = \ - $(AM_LDADD) \ - $(GTK_LIBS) \ - $(LIBGLADE_LIBS) \ - $(VTE_LIBS) \ - $(LIBCONFUSE_LIBS) \ - $(X11_LIBS) \ - $(LTLIBINTL) \ - $(LEXLIB) \ - -lm \ - $(NULL) - -all: $(BUILT_SOURCES) tilda-config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -.SUFFIXES: .c .o .obj -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/src/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; -$(srcdir)/src/Makefile.am $(am__empty): - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -tilda-config.h: stamp-h1 - @test -f $@ || rm -f stamp-h1 - @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 - -stamp-h1: $(srcdir)/tilda-config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status tilda-config.h -$(srcdir)/tilda-config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f tilda-config.h stamp-h1 -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p \ - ; then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' \ - -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' \ - `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) -src/$(am__dirstamp): - @$(MKDIR_P) src - @: > src/$(am__dirstamp) -src/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) src/$(DEPDIR) - @: > src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-glade-resources.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-tilda-enum-types.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-configsys.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-eggaccelerators.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-key_grabber.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-screen-size.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-tilda.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-tilda-keybinding.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-tilda-cli-options.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-tilda-palettes.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-tilda-search-box.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-tilda_terminal.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-tilda_window.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-tomboykeybinder.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-wizard.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_tilda-xerror.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) - -src/tilda$(EXEEXT): $(src_tilda_OBJECTS) $(src_tilda_DEPENDENCIES) $(EXTRA_src_tilda_DEPENDENCIES) src/$(am__dirstamp) - @rm -f src/tilda$(EXEEXT) - $(AM_V_CCLD)$(src_tilda_LINK) $(src_tilda_OBJECTS) $(src_tilda_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -rm -f src/*.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-configsys.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-eggaccelerators.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-glade-resources.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-key_grabber.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-screen-size.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-tilda-cli-options.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-tilda-enum-types.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-tilda-keybinding.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-tilda-palettes.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-tilda-search-box.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-tilda.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-tilda_terminal.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-tilda_window.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-tomboykeybinder.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-wizard.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_tilda-xerror.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -src/src_tilda-glade-resources.o: src/glade-resources.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-glade-resources.o -MD -MP -MF src/$(DEPDIR)/src_tilda-glade-resources.Tpo -c -o src/src_tilda-glade-resources.o `test -f 'src/glade-resources.c' || echo '$(srcdir)/'`src/glade-resources.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-glade-resources.Tpo src/$(DEPDIR)/src_tilda-glade-resources.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/glade-resources.c' object='src/src_tilda-glade-resources.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-glade-resources.o `test -f 'src/glade-resources.c' || echo '$(srcdir)/'`src/glade-resources.c - -src/src_tilda-glade-resources.obj: src/glade-resources.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-glade-resources.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-glade-resources.Tpo -c -o src/src_tilda-glade-resources.obj `if test -f 'src/glade-resources.c'; then $(CYGPATH_W) 'src/glade-resources.c'; else $(CYGPATH_W) '$(srcdir)/src/glade-resources.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-glade-resources.Tpo src/$(DEPDIR)/src_tilda-glade-resources.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/glade-resources.c' object='src/src_tilda-glade-resources.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-glade-resources.obj `if test -f 'src/glade-resources.c'; then $(CYGPATH_W) 'src/glade-resources.c'; else $(CYGPATH_W) '$(srcdir)/src/glade-resources.c'; fi` - -src/src_tilda-tilda-enum-types.o: src/tilda-enum-types.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda-enum-types.o -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda-enum-types.Tpo -c -o src/src_tilda-tilda-enum-types.o `test -f 'src/tilda-enum-types.c' || echo '$(srcdir)/'`src/tilda-enum-types.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda-enum-types.Tpo src/$(DEPDIR)/src_tilda-tilda-enum-types.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda-enum-types.c' object='src/src_tilda-tilda-enum-types.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda-enum-types.o `test -f 'src/tilda-enum-types.c' || echo '$(srcdir)/'`src/tilda-enum-types.c - -src/src_tilda-tilda-enum-types.obj: src/tilda-enum-types.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda-enum-types.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda-enum-types.Tpo -c -o src/src_tilda-tilda-enum-types.obj `if test -f 'src/tilda-enum-types.c'; then $(CYGPATH_W) 'src/tilda-enum-types.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda-enum-types.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda-enum-types.Tpo src/$(DEPDIR)/src_tilda-tilda-enum-types.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda-enum-types.c' object='src/src_tilda-tilda-enum-types.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda-enum-types.obj `if test -f 'src/tilda-enum-types.c'; then $(CYGPATH_W) 'src/tilda-enum-types.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda-enum-types.c'; fi` - -src/src_tilda-configsys.o: src/configsys.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-configsys.o -MD -MP -MF src/$(DEPDIR)/src_tilda-configsys.Tpo -c -o src/src_tilda-configsys.o `test -f 'src/configsys.c' || echo '$(srcdir)/'`src/configsys.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-configsys.Tpo src/$(DEPDIR)/src_tilda-configsys.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/configsys.c' object='src/src_tilda-configsys.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-configsys.o `test -f 'src/configsys.c' || echo '$(srcdir)/'`src/configsys.c - -src/src_tilda-configsys.obj: src/configsys.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-configsys.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-configsys.Tpo -c -o src/src_tilda-configsys.obj `if test -f 'src/configsys.c'; then $(CYGPATH_W) 'src/configsys.c'; else $(CYGPATH_W) '$(srcdir)/src/configsys.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-configsys.Tpo src/$(DEPDIR)/src_tilda-configsys.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/configsys.c' object='src/src_tilda-configsys.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-configsys.obj `if test -f 'src/configsys.c'; then $(CYGPATH_W) 'src/configsys.c'; else $(CYGPATH_W) '$(srcdir)/src/configsys.c'; fi` - -src/src_tilda-eggaccelerators.o: src/eggaccelerators.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-eggaccelerators.o -MD -MP -MF src/$(DEPDIR)/src_tilda-eggaccelerators.Tpo -c -o src/src_tilda-eggaccelerators.o `test -f 'src/eggaccelerators.c' || echo '$(srcdir)/'`src/eggaccelerators.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-eggaccelerators.Tpo src/$(DEPDIR)/src_tilda-eggaccelerators.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/eggaccelerators.c' object='src/src_tilda-eggaccelerators.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-eggaccelerators.o `test -f 'src/eggaccelerators.c' || echo '$(srcdir)/'`src/eggaccelerators.c - -src/src_tilda-eggaccelerators.obj: src/eggaccelerators.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-eggaccelerators.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-eggaccelerators.Tpo -c -o src/src_tilda-eggaccelerators.obj `if test -f 'src/eggaccelerators.c'; then $(CYGPATH_W) 'src/eggaccelerators.c'; else $(CYGPATH_W) '$(srcdir)/src/eggaccelerators.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-eggaccelerators.Tpo src/$(DEPDIR)/src_tilda-eggaccelerators.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/eggaccelerators.c' object='src/src_tilda-eggaccelerators.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-eggaccelerators.obj `if test -f 'src/eggaccelerators.c'; then $(CYGPATH_W) 'src/eggaccelerators.c'; else $(CYGPATH_W) '$(srcdir)/src/eggaccelerators.c'; fi` - -src/src_tilda-key_grabber.o: src/key_grabber.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-key_grabber.o -MD -MP -MF src/$(DEPDIR)/src_tilda-key_grabber.Tpo -c -o src/src_tilda-key_grabber.o `test -f 'src/key_grabber.c' || echo '$(srcdir)/'`src/key_grabber.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-key_grabber.Tpo src/$(DEPDIR)/src_tilda-key_grabber.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/key_grabber.c' object='src/src_tilda-key_grabber.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-key_grabber.o `test -f 'src/key_grabber.c' || echo '$(srcdir)/'`src/key_grabber.c - -src/src_tilda-key_grabber.obj: src/key_grabber.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-key_grabber.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-key_grabber.Tpo -c -o src/src_tilda-key_grabber.obj `if test -f 'src/key_grabber.c'; then $(CYGPATH_W) 'src/key_grabber.c'; else $(CYGPATH_W) '$(srcdir)/src/key_grabber.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-key_grabber.Tpo src/$(DEPDIR)/src_tilda-key_grabber.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/key_grabber.c' object='src/src_tilda-key_grabber.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-key_grabber.obj `if test -f 'src/key_grabber.c'; then $(CYGPATH_W) 'src/key_grabber.c'; else $(CYGPATH_W) '$(srcdir)/src/key_grabber.c'; fi` - -src/src_tilda-screen-size.o: src/screen-size.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-screen-size.o -MD -MP -MF src/$(DEPDIR)/src_tilda-screen-size.Tpo -c -o src/src_tilda-screen-size.o `test -f 'src/screen-size.c' || echo '$(srcdir)/'`src/screen-size.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-screen-size.Tpo src/$(DEPDIR)/src_tilda-screen-size.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/screen-size.c' object='src/src_tilda-screen-size.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-screen-size.o `test -f 'src/screen-size.c' || echo '$(srcdir)/'`src/screen-size.c - -src/src_tilda-screen-size.obj: src/screen-size.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-screen-size.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-screen-size.Tpo -c -o src/src_tilda-screen-size.obj `if test -f 'src/screen-size.c'; then $(CYGPATH_W) 'src/screen-size.c'; else $(CYGPATH_W) '$(srcdir)/src/screen-size.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-screen-size.Tpo src/$(DEPDIR)/src_tilda-screen-size.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/screen-size.c' object='src/src_tilda-screen-size.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-screen-size.obj `if test -f 'src/screen-size.c'; then $(CYGPATH_W) 'src/screen-size.c'; else $(CYGPATH_W) '$(srcdir)/src/screen-size.c'; fi` - -src/src_tilda-tilda.o: src/tilda.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda.o -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda.Tpo -c -o src/src_tilda-tilda.o `test -f 'src/tilda.c' || echo '$(srcdir)/'`src/tilda.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda.Tpo src/$(DEPDIR)/src_tilda-tilda.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda.c' object='src/src_tilda-tilda.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda.o `test -f 'src/tilda.c' || echo '$(srcdir)/'`src/tilda.c - -src/src_tilda-tilda.obj: src/tilda.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda.Tpo -c -o src/src_tilda-tilda.obj `if test -f 'src/tilda.c'; then $(CYGPATH_W) 'src/tilda.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda.Tpo src/$(DEPDIR)/src_tilda-tilda.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda.c' object='src/src_tilda-tilda.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda.obj `if test -f 'src/tilda.c'; then $(CYGPATH_W) 'src/tilda.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda.c'; fi` - -src/src_tilda-tilda-keybinding.o: src/tilda-keybinding.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda-keybinding.o -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda-keybinding.Tpo -c -o src/src_tilda-tilda-keybinding.o `test -f 'src/tilda-keybinding.c' || echo '$(srcdir)/'`src/tilda-keybinding.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda-keybinding.Tpo src/$(DEPDIR)/src_tilda-tilda-keybinding.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda-keybinding.c' object='src/src_tilda-tilda-keybinding.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda-keybinding.o `test -f 'src/tilda-keybinding.c' || echo '$(srcdir)/'`src/tilda-keybinding.c - -src/src_tilda-tilda-keybinding.obj: src/tilda-keybinding.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda-keybinding.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda-keybinding.Tpo -c -o src/src_tilda-tilda-keybinding.obj `if test -f 'src/tilda-keybinding.c'; then $(CYGPATH_W) 'src/tilda-keybinding.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda-keybinding.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda-keybinding.Tpo src/$(DEPDIR)/src_tilda-tilda-keybinding.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda-keybinding.c' object='src/src_tilda-tilda-keybinding.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda-keybinding.obj `if test -f 'src/tilda-keybinding.c'; then $(CYGPATH_W) 'src/tilda-keybinding.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda-keybinding.c'; fi` - -src/src_tilda-tilda-cli-options.o: src/tilda-cli-options.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda-cli-options.o -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda-cli-options.Tpo -c -o src/src_tilda-tilda-cli-options.o `test -f 'src/tilda-cli-options.c' || echo '$(srcdir)/'`src/tilda-cli-options.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda-cli-options.Tpo src/$(DEPDIR)/src_tilda-tilda-cli-options.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda-cli-options.c' object='src/src_tilda-tilda-cli-options.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda-cli-options.o `test -f 'src/tilda-cli-options.c' || echo '$(srcdir)/'`src/tilda-cli-options.c - -src/src_tilda-tilda-cli-options.obj: src/tilda-cli-options.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda-cli-options.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda-cli-options.Tpo -c -o src/src_tilda-tilda-cli-options.obj `if test -f 'src/tilda-cli-options.c'; then $(CYGPATH_W) 'src/tilda-cli-options.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda-cli-options.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda-cli-options.Tpo src/$(DEPDIR)/src_tilda-tilda-cli-options.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda-cli-options.c' object='src/src_tilda-tilda-cli-options.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda-cli-options.obj `if test -f 'src/tilda-cli-options.c'; then $(CYGPATH_W) 'src/tilda-cli-options.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda-cli-options.c'; fi` - -src/src_tilda-tilda-palettes.o: src/tilda-palettes.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda-palettes.o -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda-palettes.Tpo -c -o src/src_tilda-tilda-palettes.o `test -f 'src/tilda-palettes.c' || echo '$(srcdir)/'`src/tilda-palettes.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda-palettes.Tpo src/$(DEPDIR)/src_tilda-tilda-palettes.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda-palettes.c' object='src/src_tilda-tilda-palettes.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda-palettes.o `test -f 'src/tilda-palettes.c' || echo '$(srcdir)/'`src/tilda-palettes.c - -src/src_tilda-tilda-palettes.obj: src/tilda-palettes.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda-palettes.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda-palettes.Tpo -c -o src/src_tilda-tilda-palettes.obj `if test -f 'src/tilda-palettes.c'; then $(CYGPATH_W) 'src/tilda-palettes.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda-palettes.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda-palettes.Tpo src/$(DEPDIR)/src_tilda-tilda-palettes.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda-palettes.c' object='src/src_tilda-tilda-palettes.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda-palettes.obj `if test -f 'src/tilda-palettes.c'; then $(CYGPATH_W) 'src/tilda-palettes.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda-palettes.c'; fi` - -src/src_tilda-tilda-search-box.o: src/tilda-search-box.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda-search-box.o -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda-search-box.Tpo -c -o src/src_tilda-tilda-search-box.o `test -f 'src/tilda-search-box.c' || echo '$(srcdir)/'`src/tilda-search-box.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda-search-box.Tpo src/$(DEPDIR)/src_tilda-tilda-search-box.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda-search-box.c' object='src/src_tilda-tilda-search-box.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda-search-box.o `test -f 'src/tilda-search-box.c' || echo '$(srcdir)/'`src/tilda-search-box.c - -src/src_tilda-tilda-search-box.obj: src/tilda-search-box.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda-search-box.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda-search-box.Tpo -c -o src/src_tilda-tilda-search-box.obj `if test -f 'src/tilda-search-box.c'; then $(CYGPATH_W) 'src/tilda-search-box.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda-search-box.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda-search-box.Tpo src/$(DEPDIR)/src_tilda-tilda-search-box.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda-search-box.c' object='src/src_tilda-tilda-search-box.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda-search-box.obj `if test -f 'src/tilda-search-box.c'; then $(CYGPATH_W) 'src/tilda-search-box.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda-search-box.c'; fi` - -src/src_tilda-tilda_terminal.o: src/tilda_terminal.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda_terminal.o -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda_terminal.Tpo -c -o src/src_tilda-tilda_terminal.o `test -f 'src/tilda_terminal.c' || echo '$(srcdir)/'`src/tilda_terminal.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda_terminal.Tpo src/$(DEPDIR)/src_tilda-tilda_terminal.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda_terminal.c' object='src/src_tilda-tilda_terminal.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda_terminal.o `test -f 'src/tilda_terminal.c' || echo '$(srcdir)/'`src/tilda_terminal.c - -src/src_tilda-tilda_terminal.obj: src/tilda_terminal.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda_terminal.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda_terminal.Tpo -c -o src/src_tilda-tilda_terminal.obj `if test -f 'src/tilda_terminal.c'; then $(CYGPATH_W) 'src/tilda_terminal.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda_terminal.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda_terminal.Tpo src/$(DEPDIR)/src_tilda-tilda_terminal.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda_terminal.c' object='src/src_tilda-tilda_terminal.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda_terminal.obj `if test -f 'src/tilda_terminal.c'; then $(CYGPATH_W) 'src/tilda_terminal.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda_terminal.c'; fi` - -src/src_tilda-tilda_window.o: src/tilda_window.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda_window.o -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda_window.Tpo -c -o src/src_tilda-tilda_window.o `test -f 'src/tilda_window.c' || echo '$(srcdir)/'`src/tilda_window.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda_window.Tpo src/$(DEPDIR)/src_tilda-tilda_window.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda_window.c' object='src/src_tilda-tilda_window.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda_window.o `test -f 'src/tilda_window.c' || echo '$(srcdir)/'`src/tilda_window.c - -src/src_tilda-tilda_window.obj: src/tilda_window.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tilda_window.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-tilda_window.Tpo -c -o src/src_tilda-tilda_window.obj `if test -f 'src/tilda_window.c'; then $(CYGPATH_W) 'src/tilda_window.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda_window.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tilda_window.Tpo src/$(DEPDIR)/src_tilda-tilda_window.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tilda_window.c' object='src/src_tilda-tilda_window.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tilda_window.obj `if test -f 'src/tilda_window.c'; then $(CYGPATH_W) 'src/tilda_window.c'; else $(CYGPATH_W) '$(srcdir)/src/tilda_window.c'; fi` - -src/src_tilda-tomboykeybinder.o: src/tomboykeybinder.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tomboykeybinder.o -MD -MP -MF src/$(DEPDIR)/src_tilda-tomboykeybinder.Tpo -c -o src/src_tilda-tomboykeybinder.o `test -f 'src/tomboykeybinder.c' || echo '$(srcdir)/'`src/tomboykeybinder.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tomboykeybinder.Tpo src/$(DEPDIR)/src_tilda-tomboykeybinder.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tomboykeybinder.c' object='src/src_tilda-tomboykeybinder.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tomboykeybinder.o `test -f 'src/tomboykeybinder.c' || echo '$(srcdir)/'`src/tomboykeybinder.c - -src/src_tilda-tomboykeybinder.obj: src/tomboykeybinder.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-tomboykeybinder.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-tomboykeybinder.Tpo -c -o src/src_tilda-tomboykeybinder.obj `if test -f 'src/tomboykeybinder.c'; then $(CYGPATH_W) 'src/tomboykeybinder.c'; else $(CYGPATH_W) '$(srcdir)/src/tomboykeybinder.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-tomboykeybinder.Tpo src/$(DEPDIR)/src_tilda-tomboykeybinder.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/tomboykeybinder.c' object='src/src_tilda-tomboykeybinder.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-tomboykeybinder.obj `if test -f 'src/tomboykeybinder.c'; then $(CYGPATH_W) 'src/tomboykeybinder.c'; else $(CYGPATH_W) '$(srcdir)/src/tomboykeybinder.c'; fi` - -src/src_tilda-wizard.o: src/wizard.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-wizard.o -MD -MP -MF src/$(DEPDIR)/src_tilda-wizard.Tpo -c -o src/src_tilda-wizard.o `test -f 'src/wizard.c' || echo '$(srcdir)/'`src/wizard.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-wizard.Tpo src/$(DEPDIR)/src_tilda-wizard.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/wizard.c' object='src/src_tilda-wizard.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-wizard.o `test -f 'src/wizard.c' || echo '$(srcdir)/'`src/wizard.c - -src/src_tilda-wizard.obj: src/wizard.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-wizard.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-wizard.Tpo -c -o src/src_tilda-wizard.obj `if test -f 'src/wizard.c'; then $(CYGPATH_W) 'src/wizard.c'; else $(CYGPATH_W) '$(srcdir)/src/wizard.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-wizard.Tpo src/$(DEPDIR)/src_tilda-wizard.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/wizard.c' object='src/src_tilda-wizard.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-wizard.obj `if test -f 'src/wizard.c'; then $(CYGPATH_W) 'src/wizard.c'; else $(CYGPATH_W) '$(srcdir)/src/wizard.c'; fi` - -src/src_tilda-xerror.o: src/xerror.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-xerror.o -MD -MP -MF src/$(DEPDIR)/src_tilda-xerror.Tpo -c -o src/src_tilda-xerror.o `test -f 'src/xerror.c' || echo '$(srcdir)/'`src/xerror.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-xerror.Tpo src/$(DEPDIR)/src_tilda-xerror.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/xerror.c' object='src/src_tilda-xerror.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-xerror.o `test -f 'src/xerror.c' || echo '$(srcdir)/'`src/xerror.c - -src/src_tilda-xerror.obj: src/xerror.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -MT src/src_tilda-xerror.obj -MD -MP -MF src/$(DEPDIR)/src_tilda-xerror.Tpo -c -o src/src_tilda-xerror.obj `if test -f 'src/xerror.c'; then $(CYGPATH_W) 'src/xerror.c'; else $(CYGPATH_W) '$(srcdir)/src/xerror.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_tilda-xerror.Tpo src/$(DEPDIR)/src_tilda-xerror.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/xerror.c' object='src/src_tilda-xerror.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_tilda_CPPFLAGS) $(CPPFLAGS) $(src_tilda_CFLAGS) $(CFLAGS) -c -o src/src_tilda-xerror.obj `if test -f 'src/xerror.c'; then $(CYGPATH_W) 'src/xerror.c'; else $(CYGPATH_W) '$(srcdir)/src/xerror.c'; fi` -install-AppdataDATA: $(Appdata_DATA) - @$(NORMAL_INSTALL) - @list='$(Appdata_DATA)'; test -n "$(Appdatadir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(Appdatadir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(Appdatadir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(Appdatadir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(Appdatadir)" || exit $$?; \ - done - -uninstall-AppdataDATA: - @$(NORMAL_UNINSTALL) - @list='$(Appdata_DATA)'; test -n "$(Appdatadir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(Appdatadir)'; $(am__uninstall_files_from_dir) -install-ApplicationsDATA: $(Applications_DATA) - @$(NORMAL_INSTALL) - @list='$(Applications_DATA)'; test -n "$(Applicationsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(Applicationsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(Applicationsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(Applicationsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(Applicationsdir)" || exit $$?; \ - done - -uninstall-ApplicationsDATA: - @$(NORMAL_UNINSTALL) - @list='$(Applications_DATA)'; test -n "$(Applicationsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(Applicationsdir)'; $(am__uninstall_files_from_dir) -install-PixmapsDATA: $(Pixmaps_DATA) - @$(NORMAL_INSTALL) - @list='$(Pixmaps_DATA)'; test -n "$(Pixmapsdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(Pixmapsdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(Pixmapsdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(Pixmapsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(Pixmapsdir)" || exit $$?; \ - done - -uninstall-PixmapsDATA: - @$(NORMAL_UNINSTALL) - @list='$(Pixmaps_DATA)'; test -n "$(Pixmapsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(Pixmapsdir)'; $(am__uninstall_files_from_dir) - -# This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(am__recursive_targets): - @fail=; \ - if $(am__make_keepgoing); then \ - failcom='fail=yes'; \ - else \ - failcom='exit 1'; \ - fi; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-recursive -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-recursive - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscope: cscope.files - test ! -s cscope.files \ - || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) -clean-cscope: - -rm -f cscope.files -cscope.files: clean-cscope cscopelist -cscopelist: cscopelist-recursive - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -rm -f cscope.out cscope.in.out cscope.po.out cscope.files - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz - $(am__post_remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__post_remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__post_remove_distdir) - -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__post_remove_distdir) - -dist-tarZ: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__post_remove_distdir) - -dist-shar: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz - $(am__post_remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__post_remove_distdir) - -dist dist-all: - $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' - $(am__post_remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir) - chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build/sub \ - && ../../configure \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=../.. --prefix="$$dc_install_base" \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__post_remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) check-recursive -all-am: Makefile $(PROGRAMS) $(DATA) tilda-config.h -installdirs: installdirs-recursive -installdirs-am: - for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(Appdatadir)" "$(DESTDIR)$(Applicationsdir)" "$(DESTDIR)$(Pixmapsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -rm -f src/$(DEPDIR)/$(am__dirstamp) - -rm -f src/$(am__dirstamp) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-recursive - -clean-am: clean-binPROGRAMS clean-generic mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf src/$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-hdr distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: install-AppdataDATA install-ApplicationsDATA \ - install-PixmapsDATA - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: install-binPROGRAMS - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -rf src/$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-AppdataDATA uninstall-ApplicationsDATA \ - uninstall-PixmapsDATA uninstall-binPROGRAMS - -.MAKE: $(am__recursive_targets) all check install install-am \ - install-strip - -.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ - am--refresh check check-am clean clean-binPROGRAMS \ - clean-cscope clean-generic cscope cscopelist-am ctags ctags-am \ - dist dist-all dist-bzip2 dist-gzip dist-lzip dist-shar \ - dist-tarZ dist-xz dist-zip distcheck distclean \ - distclean-compile distclean-generic distclean-hdr \ - distclean-tags distcleancheck distdir distuninstallcheck dvi \ - dvi-am html html-am info info-am install install-AppdataDATA \ - install-ApplicationsDATA install-PixmapsDATA install-am \ - install-binPROGRAMS install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ - ps ps-am tags tags-am uninstall uninstall-AppdataDATA \ - uninstall-ApplicationsDATA uninstall-PixmapsDATA uninstall-am \ - uninstall-binPROGRAMS - -.PRECIOUS: Makefile - - -tilda.desktop: tilda.desktop.in - sed -e 's|\@BINDIR\@|$(bindir)|' \ - -e 's|\@PIXMAPSDIR\@|$(Pixmapsdir)|' $< > $@ - -# Rules to compile resources -src/glade-resources.h: src/glade-resources.gresource.xml - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --generate $< --target=$@ --sourcedir=$(srcdir)/src -src/glade-resources.c: src/glade-resources.gresource.xml - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --generate $< --target=$@ --sourcedir=$(srcdir)/src - -# Dependencies rule, and do not forget to do a make after -# editing the UI with glade! -src/glade-resources.c src/glade-resources.h: \ - src/glade-resources.gresource.xml \ - $(shell $(GLIB_COMPILE_RESOURCES) --generate-dependencies $(srcdir)/src/glade-resources.gresource.xml --sourcedir=$(srcdir)/src) - -src/tilda-enum-types.h: $(srcdir)/src/tilda-enum-types.h.template $(ENUM_TYPES) $(GLIB_MKENUMS) - $(AM_V_GEN) ($(GLIB_MKENUMS) --template $(srcdir)/src/tilda-enum-types.h.template $(ENUM_TYPES)) > $@ - -src/tilda-enum-types.c: $(srcdir)/src/tilda-enum-types.c.template $(ENUM_TYPES) $(GLIB_MKENUMS) - $(AM_V_GEN) ($(GLIB_MKENUMS) --template $(srcdir)/src/tilda-enum-types.c.template $(ENUM_TYPES)) > $@ - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/bg.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/bg.gmo differ diff -Nru tilda-1.5.2/po/bg.po tilda-1.5.4/po/bg.po --- tilda-1.5.2/po/bg.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/bg.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2014-07-30 22:44+0000\n" "Last-Translator: Anton Antonov \n" "Language-Team: Bulgarian \n" diff -Nru tilda-1.5.2/po/boldquot.sed tilda-1.5.4/po/boldquot.sed --- tilda-1.5.2/po/boldquot.sed 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/po/boldquot.sed 1970-01-01 00:00:00.000000000 +0000 @@ -1,10 +0,0 @@ -s/"\([^"]*\)"/“\1”/g -s/`\([^`']*\)'/‘\1’/g -s/ '\([^`']*\)' / ‘\1’ /g -s/ '\([^`']*\)'$/ ‘\1’/g -s/^'\([^`']*\)' /‘\1’ /g -s/“”/""/g -s/“/“/g -s/”/”/g -s/‘/‘/g -s/’/’/g Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/ca.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/ca.gmo differ diff -Nru tilda-1.5.2/po/ca.po tilda-1.5.4/po/ca.po --- tilda-1.5.2/po/ca.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/ca.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2008-01-22 10:08+0000\n" "Last-Translator: animarval \n" "Language-Team: Catalan \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/cs.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/cs.gmo differ diff -Nru tilda-1.5.2/po/cs.po tilda-1.5.4/po/cs.po --- tilda-1.5.2/po/cs.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/cs.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2008-02-14 07:57+0000\n" "Last-Translator: Vojtěch Trefný \n" "Language-Team: Czech \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/de.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/de.gmo differ diff -Nru tilda-1.5.2/po/de.po tilda-1.5.4/po/de.po --- tilda-1.5.2/po/de.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/de.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2013-07-13 11:12+0000\n" "Last-Translator: Christian Weber \n" "Language-Team: German \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/el.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/el.gmo differ diff -Nru tilda-1.5.2/po/el.po tilda-1.5.4/po/el.po --- tilda-1.5.2/po/el.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/el.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2007-11-13 19:28+0000\n" "Last-Translator: Alexander Kikis \n" "Language-Team: Greek, Modern (1453-) \n" diff -Nru tilda-1.5.2/po/en@boldquot.header tilda-1.5.4/po/en@boldquot.header --- tilda-1.5.2/po/en@boldquot.header 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/po/en@boldquot.header 1970-01-01 00:00:00.000000000 +0000 @@ -1,25 +0,0 @@ -# All this catalog "translates" are quotation characters. -# The msgids must be ASCII and therefore cannot contain real quotation -# characters, only substitutes like grave accent (0x60), apostrophe (0x27) -# and double quote (0x22). These substitutes look strange; see -# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html -# -# This catalog translates grave accent (0x60) and apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019). -# It also translates pairs of apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019) -# and pairs of quotation mark (0x22) to -# left double quotation mark (U+201C) and right double quotation mark (U+201D). -# -# When output to an UTF-8 terminal, the quotation characters appear perfectly. -# When output to an ISO-8859-1 terminal, the single quotation marks are -# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to -# grave/acute accent (by libiconv), and the double quotation marks are -# transliterated to 0x22. -# When output to an ASCII terminal, the single quotation marks are -# transliterated to apostrophes, and the double quotation marks are -# transliterated to 0x22. -# -# This catalog furthermore displays the text between the quotation marks in -# bold face, assuming the VT100/XTerm escape sequences. -# Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/en_GB.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/en_GB.gmo differ diff -Nru tilda-1.5.2/po/en_GB.po tilda-1.5.4/po/en_GB.po --- tilda-1.5.2/po/en_GB.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/en_GB.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2008-01-14 16:23+0000\n" "Last-Translator: John Drinkwater \n" "Language-Team: English (United Kingdom) \n" diff -Nru tilda-1.5.2/po/en@quot.header tilda-1.5.4/po/en@quot.header --- tilda-1.5.2/po/en@quot.header 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/po/en@quot.header 1970-01-01 00:00:00.000000000 +0000 @@ -1,22 +0,0 @@ -# All this catalog "translates" are quotation characters. -# The msgids must be ASCII and therefore cannot contain real quotation -# characters, only substitutes like grave accent (0x60), apostrophe (0x27) -# and double quote (0x22). These substitutes look strange; see -# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html -# -# This catalog translates grave accent (0x60) and apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019). -# It also translates pairs of apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019) -# and pairs of quotation mark (0x22) to -# left double quotation mark (U+201C) and right double quotation mark (U+201D). -# -# When output to an UTF-8 terminal, the quotation characters appear perfectly. -# When output to an ISO-8859-1 terminal, the single quotation marks are -# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to -# grave/acute accent (by libiconv), and the double quotation marks are -# transliterated to 0x22. -# When output to an ASCII terminal, the single quotation marks are -# transliterated to apostrophes, and the double quotation marks are -# transliterated to 0x22. -# Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/es.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/es.gmo differ diff -Nru tilda-1.5.2/po/es.po tilda-1.5.4/po/es.po --- tilda-1.5.2/po/es.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/es.po 2020-12-24 10:31:23.000000000 +0000 @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2014-09-07 12:19+0200\n" "Last-Translator: micrococo \n" "Language-Team: Spanish \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/fr.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/fr.gmo differ diff -Nru tilda-1.5.2/po/fr.po tilda-1.5.4/po/fr.po --- tilda-1.5.2/po/fr.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/fr.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2008-03-10 22:11+0000\n" "Last-Translator: François Boulogne \n" "Language-Team: French \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/hu.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/hu.gmo differ diff -Nru tilda-1.5.2/po/hu.po tilda-1.5.4/po/hu.po --- tilda-1.5.2/po/hu.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/hu.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2008-03-05 00:28+0000\n" "Last-Translator: Pittmann Tamás \n" "Language-Team: Hungarian \n" diff -Nru tilda-1.5.2/po/insert-header.sin tilda-1.5.4/po/insert-header.sin --- tilda-1.5.2/po/insert-header.sin 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/po/insert-header.sin 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ -# Sed script that inserts the file called HEADER before the header entry. -# -# At each occurrence of a line starting with "msgid ", we execute the following -# commands. At the first occurrence, insert the file. At the following -# occurrences, do nothing. The distinction between the first and the following -# occurrences is achieved by looking at the hold space. -/^msgid /{ -x -# Test if the hold space is empty. -s/m/m/ -ta -# Yes it was empty. First occurrence. Read the file. -r HEADER -# Output the file's contents by reading the next line. But don't lose the -# current line while doing this. -g -N -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -} Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/it.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/it.gmo differ diff -Nru tilda-1.5.2/po/it.po tilda-1.5.4/po/it.po --- tilda-1.5.2/po/it.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/it.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2010-08-22 18:58+0000\n" "Last-Translator: Davide Truffa \n" "Language-Team: Italian \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/lt.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/lt.gmo differ diff -Nru tilda-1.5.2/po/lt.po tilda-1.5.4/po/lt.po --- tilda-1.5.2/po/lt.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/lt.po 2020-12-24 10:31:23.000000000 +0000 @@ -2,7 +2,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2014-06-16 09:53+0200\n" "Last-Translator: Algimantas Margevičius \n" "Language-Team: Lithuanian \n" diff -Nru tilda-1.5.2/po/Makefile.in.in tilda-1.5.4/po/Makefile.in.in --- tilda-1.5.2/po/Makefile.in.in 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/po/Makefile.in.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,444 +0,0 @@ -# Makefile for PO directory in any package using GNU gettext. -# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper -# -# This file can be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU General Public -# License but which still want to provide support for the GNU gettext -# functionality. -# Please note that the actual code of GNU gettext is covered by the GNU -# General Public License and is *not* in the public domain. -# -# Origin: gettext-0.18 -GETTEXT_MACRO_VERSION = 0.18 - -PACKAGE = @PACKAGE@ -VERSION = @VERSION@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ - -SHELL = /bin/sh -@SET_MAKE@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -datarootdir = @datarootdir@ -datadir = @datadir@ -localedir = @localedir@ -gettextsrcdir = $(datadir)/gettext/po - -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ - -# We use $(mkdir_p). -# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as -# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, -# @install_sh@ does not start with $(SHELL), so we add it. -# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined -# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake -# versions, $(mkinstalldirs) and $(install_sh) are unused. -mkinstalldirs = $(SHELL) @install_sh@ -d -install_sh = $(SHELL) @install_sh@ -MKDIR_P = @MKDIR_P@ -mkdir_p = @mkdir_p@ - -GMSGFMT_ = @GMSGFMT@ -GMSGFMT_no = @GMSGFMT@ -GMSGFMT_yes = @GMSGFMT_015@ -GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) -MSGFMT_ = @MSGFMT@ -MSGFMT_no = @MSGFMT@ -MSGFMT_yes = @MSGFMT_015@ -MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) -XGETTEXT_ = @XGETTEXT@ -XGETTEXT_no = @XGETTEXT@ -XGETTEXT_yes = @XGETTEXT_015@ -XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) -MSGMERGE = msgmerge -MSGMERGE_UPDATE = @MSGMERGE@ --update -MSGINIT = msginit -MSGCONV = msgconv -MSGFILTER = msgfilter - -POFILES = @POFILES@ -GMOFILES = @GMOFILES@ -UPDATEPOFILES = @UPDATEPOFILES@ -DUMMYPOFILES = @DUMMYPOFILES@ -DISTFILES.common = Makefile.in.in remove-potcdate.sin \ -$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) -DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ -$(POFILES) $(GMOFILES) \ -$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) - -POTFILES = \ - -CATALOGS = @CATALOGS@ - -# Makevars gets inserted here. (Don't remove this line!) - -.SUFFIXES: -.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update - -.po.mo: - @echo "$(MSGFMT) -c -o $@ $<"; \ - $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ - -.po.gmo: - @lang=`echo $* | sed -e 's,.*/,,'`; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \ - cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo - -.sin.sed: - sed -e '/^#/d' $< > t-$@ - mv t-$@ $@ - - -all: check-macro-version all-@USE_NLS@ - -all-yes: stamp-po -all-no: - -# Ensure that the gettext macros and this Makefile.in.in are in sync. -check-macro-version: - @test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ - || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ - exit 1; \ - } - -# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no -# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because -# we don't want to bother translators with empty POT files). We assume that -# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. -# In this case, stamp-po is a nop (i.e. a phony target). - -# stamp-po is a timestamp denoting the last time at which the CATALOGS have -# been loosely updated. Its purpose is that when a developer or translator -# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, -# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent -# invocations of "make" will do nothing. This timestamp would not be necessary -# if updating the $(CATALOGS) would always touch them; however, the rule for -# $(POFILES) has been designed to not touch files that don't need to be -# changed. -stamp-po: $(srcdir)/$(DOMAIN).pot - test ! -f $(srcdir)/$(DOMAIN).pot || \ - test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) - @test ! -f $(srcdir)/$(DOMAIN).pot || { \ - echo "touch stamp-po" && \ - echo timestamp > stamp-poT && \ - mv stamp-poT stamp-po; \ - } - -# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', -# otherwise packages like GCC can not be built if only parts of the source -# have been downloaded. - -# This target rebuilds $(DOMAIN).pot; it is an expensive operation. -# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. -$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed - if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \ - package_gnu='GNU '; \ - else \ - package_gnu=''; \ - fi; \ - if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ - msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ - else \ - msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ - fi; \ - case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - *) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --package-name="$${package_gnu}@PACKAGE@" \ - --package-version='@VERSION@' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - esac - test ! -f $(DOMAIN).po || { \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ - sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ - if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ - else \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - else \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - } - -# This rule has no dependencies: we don't need to update $(DOMAIN).pot at -# every "make" invocation, only create it when it is missing. -# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. -$(srcdir)/$(DOMAIN).pot: - $(MAKE) $(DOMAIN).pot-update - -# This target rebuilds a PO file if $(DOMAIN).pot has changed. -# Note that a PO file is not touched if it doesn't need to be changed. -$(POFILES): $(srcdir)/$(DOMAIN).pot - @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ - if test -f "$(srcdir)/$${lang}.po"; then \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \ - cd $(srcdir) \ - && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \ - esac; \ - }; \ - else \ - $(MAKE) $${lang}.po-create; \ - fi - - -install: install-exec install-data -install-exec: -install-data: install-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - for file in $(DISTFILES.common) Makevars.template; do \ - $(INSTALL_DATA) $(srcdir)/$$file \ - $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - for file in Makevars; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -install-data-no: all -install-data-yes: all - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ - $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ - echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ - fi; \ - done; \ - done - -install-strip: install - -installdirs: installdirs-exec installdirs-data -installdirs-exec: -installdirs-data: installdirs-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - else \ - : ; \ - fi -installdirs-data-no: -installdirs-data-yes: - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - fi; \ - done; \ - done - -# Define this as empty until I found a useful application. -installcheck: - -uninstall: uninstall-exec uninstall-data -uninstall-exec: -uninstall-data: uninstall-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - for file in $(DISTFILES.common) Makevars.template; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -uninstall-data-no: -uninstall-data-yes: - catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - done; \ - done - -check: all - -info dvi ps pdf html tags TAGS ctags CTAGS ID: - -mostlyclean: - rm -f remove-potcdate.sed - rm -f stamp-poT - rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po - rm -fr *.o - -clean: mostlyclean - -distclean: clean - rm -f Makefile Makefile.in POTFILES *.mo - -maintainer-clean: distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - rm -f stamp-po $(GMOFILES) - -distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) -dist distdir: - $(MAKE) update-po - @$(MAKE) dist2 -# This is a separate target because 'update-po' must be executed before. -dist2: stamp-po $(DISTFILES) - dists="$(DISTFILES)"; \ - if test "$(PACKAGE)" = "gettext-tools"; then \ - dists="$$dists Makevars.template"; \ - fi; \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - dists="$$dists $(DOMAIN).pot stamp-po"; \ - fi; \ - if test -f $(srcdir)/ChangeLog; then \ - dists="$$dists ChangeLog"; \ - fi; \ - for i in 0 1 2 3 4 5 6 7 8 9; do \ - if test -f $(srcdir)/ChangeLog.$$i; then \ - dists="$$dists ChangeLog.$$i"; \ - fi; \ - done; \ - if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ - for file in $$dists; do \ - if test -f $$file; then \ - cp -p $$file $(distdir) || exit 1; \ - else \ - cp -p $(srcdir)/$$file $(distdir) || exit 1; \ - fi; \ - done - -update-po: Makefile - $(MAKE) $(DOMAIN).pot-update - test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) - $(MAKE) update-gmo - -# General rule for creating PO files. - -.nop.po-create: - @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ - echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ - exit 1 - -# General rule for updating PO files. - -.nop.po-update: - @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ - if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ - cd $(srcdir); \ - if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - esac; \ - }; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "msgmerge for $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -$(DUMMYPOFILES): - -update-gmo: Makefile $(GMOFILES) - @: - -# Recreate Makefile by invoking config.status. Explicitly invoke the shell, -# because execution permission bits may not work on the current file system. -# Use @SHELL@, which is the shell determined by autoconf for the use by its -# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. -Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ - cd $(top_builddir) \ - && @SHELL@ ./config.status $(subdir)/$@.in po-directories - -force: - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/nb.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/nb.gmo differ diff -Nru tilda-1.5.2/po/nb.po tilda-1.5.4/po/nb.po --- tilda-1.5.2/po/nb.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/nb.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda 1.5~alpha\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2018-05-29 10:38+0100\n" "Last-Translator: Åka Sikrom \n" "Language-Team: Norwegian Bokmaal \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/pl.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/pl.gmo differ diff -Nru tilda-1.5.2/po/pl.po tilda-1.5.4/po/pl.po --- tilda-1.5.2/po/pl.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/pl.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2008-03-06 00:10+0000\n" "Last-Translator: Maciej Habant \n" "Language-Team: Polish \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/pt_BR.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/pt_BR.gmo differ diff -Nru tilda-1.5.2/po/pt_BR.po tilda-1.5.4/po/pt_BR.po --- tilda-1.5.2/po/pt_BR.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/pt_BR.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2014-08-04 22:29+0000\n" "Last-Translator: NatanJMai \n" "Language: pt_BR\n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/pt.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/pt.gmo differ diff -Nru tilda-1.5.2/po/pt.po tilda-1.5.4/po/pt.po --- tilda-1.5.2/po/pt.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/pt.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2008-04-19 11:22+0000\n" "Last-Translator: João Santos \n" "Language-Team: Portuguese \n" diff -Nru tilda-1.5.2/po/quot.sed tilda-1.5.4/po/quot.sed --- tilda-1.5.2/po/quot.sed 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/po/quot.sed 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ -s/"\([^"]*\)"/“\1”/g -s/`\([^`']*\)'/‘\1’/g -s/ '\([^`']*\)' / ‘\1’ /g -s/ '\([^`']*\)'$/ ‘\1’/g -s/^'\([^`']*\)' /‘\1’ /g -s/“”/""/g diff -Nru tilda-1.5.2/po/README tilda-1.5.4/po/README --- tilda-1.5.2/po/README 1970-01-01 00:00:00.000000000 +0000 +++ tilda-1.5.4/po/README 2020-12-24 10:31:23.000000000 +0000 @@ -0,0 +1,45 @@ +New Translations +================================================================================ +We, the Tilda developers, have stopped using Launchpad to assist with our +translation effort. It was located at +https://translations.launchpad.net/tilda/trunk/+pots/tilda + +Please directly submit Pull Requests on GitHub to update translations or +initialize new translation. + + +How to integrate a new translation into Tilda +================================================================================ +1) Copy the LANG.po file into the po/ directory. +2) Add LANG to the po/LINGUAS file. + +The next time you completely rebuild and install Tilda, it will automatically +compile and install the language file onto your system. Afterwards, if you run +Tilda with the correct LANG environmental variable, Tilda should use your +translation. + + +How to do a new translation without Launchpad +================================================================================ +cd po +msginit -l en_US # (for USA English. Creates en.po) + +# ... do the translation in your editor of choice ... + +# add your translation to the LINGUAS file, without the .po +# extension. +# +# That would be "en" for the above examples +# +# If po/Makefile does not exist, please configure this project first: +# +# autoreconf --install --verbose --force +# ./configure + +Then run the following commands: + +make update-po +make update-gmo +cd .. +make + diff -Nru tilda-1.5.2/po/remove-potcdate.sin tilda-1.5.4/po/remove-potcdate.sin --- tilda-1.5.2/po/remove-potcdate.sin 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/po/remove-potcdate.sin 1970-01-01 00:00:00.000000000 +0000 @@ -1,19 +0,0 @@ -# Sed script that remove the POT-Creation-Date line in the header entry -# from a POT file. -# -# The distinction between the first and the following occurrences of the -# pattern is achieved by looking at the hold space. -/^"POT-Creation-Date: .*"$/{ -x -# Test if the hold space is empty. -s/P/P/ -ta -# Yes it was empty. First occurrence. Remove the line. -g -d -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -} Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/ru.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/ru.gmo differ diff -Nru tilda-1.5.2/po/Rules-quot tilda-1.5.4/po/Rules-quot --- tilda-1.5.2/po/Rules-quot 2020-05-10 14:15:42.000000000 +0000 +++ tilda-1.5.4/po/Rules-quot 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ -# Special Makefile rules for English message catalogs with quotation marks. - -DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot - -.SUFFIXES: .insert-header .po-update-en - -en@quot.po-create: - $(MAKE) en@quot.po-update -en@boldquot.po-create: - $(MAKE) en@boldquot.po-update - -en@quot.po-update: en@quot.po-update-en -en@boldquot.po-update: en@boldquot.po-update-en - -.insert-header.po-update-en: - @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ - if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - ll=`echo $$lang | sed -e 's/@.*//'`; \ - LC_ALL=C; export LC_ALL; \ - cd $(srcdir); \ - if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "creation of $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -en@quot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header - -en@boldquot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header - -mostlyclean: mostlyclean-quot -mostlyclean-quot: - rm -f *.insert-header diff -Nru tilda-1.5.2/po/ru.po tilda-1.5.4/po/ru.po --- tilda-1.5.2/po/ru.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/ru.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2008-02-09 09:14+0000\n" "Last-Translator: Anton Shestakov \n" "Language-Team: Russian \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/sk.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/sk.gmo differ diff -Nru tilda-1.5.2/po/sk.po tilda-1.5.4/po/sk.po --- tilda-1.5.2/po/sk.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/sk.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2007-11-22 22:15+0000\n" "Last-Translator: Matej Duman \n" "Language-Team: Slovak \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/sl.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/sl.gmo differ diff -Nru tilda-1.5.2/po/sl.po tilda-1.5.4/po/sl.po --- tilda-1.5.2/po/sl.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/sl.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2007-07-11 00:16+0000\n" "Last-Translator: Nejc Lotrič \n" "Language-Team: Slovenian \n" diff -Nru tilda-1.5.2/po/stamp-po tilda-1.5.4/po/stamp-po --- tilda-1.5.2/po/stamp-po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/stamp-po 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -timestamp Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/sv.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/sv.gmo differ diff -Nru tilda-1.5.2/po/sv.po tilda-1.5.4/po/sv.po --- tilda-1.5.2/po/sv.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/sv.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2007-05-14 18:18+0000\n" "Last-Translator: Umut \n" "Language-Team: Swedish \n" diff -Nru tilda-1.5.2/po/tilda.pot tilda-1.5.4/po/tilda.pot --- tilda-1.5.2/po/tilda.pot 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/tilda.pot 1970-01-01 00:00:00.000000000 +0000 @@ -1,791 +0,0 @@ -# SOME DESCRIPTIVE TITLE. -# Copyright (C) YEAR Ira W. Snyder -# This file is distributed under the same license as the tilda package. -# FIRST AUTHOR , YEAR. -# -#, fuzzy -msgid "" -msgstr "" -"Project-Id-Version: tilda 1.5.2\n" -"Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=CHARSET\n" -"Content-Transfer-Encoding: 8bit\n" - -#: src/menu.ui:6 -msgid "_New Tab" -msgstr "" - -#: src/menu.ui:10 -msgid "_Close Tab" -msgstr "" - -#: src/menu.ui:16 -msgid "_Copy" -msgstr "" - -#: src/menu.ui:20 -msgid "_Paste" -msgstr "" - -#: src/menu.ui:26 -msgid "_Toggle Fullscreen" -msgstr "" - -#: src/menu.ui:30 -msgid "_Toggle Searchbar" -msgstr "" - -#: src/menu.ui:36 -msgid "_Preferences" -msgstr "" - -#: src/menu.ui:42 -msgid "_Quit" -msgstr "" - -#: src/tilda.ui:69 -msgid "Close Tilda" -msgstr "" - -#: src/tilda.ui:72 -msgid "Open a new terminal" -msgstr "" - -#: src/tilda.ui:75 -msgid "Open a new terminal and hide" -msgstr "" - -#: src/tilda.ui:86 src/tilda.ui:194 -msgid "Top" -msgstr "" - -#: src/tilda.ui:89 src/tilda.ui:197 -msgid "Bottom" -msgstr "" - -#: src/tilda.ui:92 src/tilda.ui:200 -msgid "Left" -msgstr "" - -#: src/tilda.ui:95 src/tilda.ui:203 -msgid "Right" -msgstr "" - -#: src/tilda.ui:98 -msgid "Hidden" -msgstr "" - -#: src/tilda.ui:109 -msgid "Focus Terminal" -msgstr "" - -#: src/tilda.ui:112 -msgid "Hide Terminal" -msgstr "" - -#: src/tilda.ui:123 -msgid "Block Cursor" -msgstr "" - -#: src/tilda.ui:126 -msgid "IBeam Cursor" -msgstr "" - -#: src/tilda.ui:129 -msgid "Underline Cursor" -msgstr "" - -#: src/tilda.ui:140 -msgid "Show whole tab title" -msgstr "" - -#: src/tilda.ui:143 -msgid "Show first n chars of title" -msgstr "" - -#: src/tilda.ui:146 -msgid "Show last n chars of title" -msgstr "" - -#: src/tilda.ui:157 -msgid "Isn't displayed" -msgstr "" - -#: src/tilda.ui:160 -msgid "Goes after initial title" -msgstr "" - -#: src/tilda.ui:163 -msgid "Goes before initial title" -msgstr "" - -#: src/tilda.ui:166 -msgid "Replace initial title" -msgstr "" - -#: src/tilda.ui:177 -msgid "Drop to the default shell" -msgstr "" - -#: src/tilda.ui:180 -msgid "Restart the command" -msgstr "" - -#: src/tilda.ui:183 -msgid "Exit the terminal" -msgstr "" - -#: src/tilda.ui:214 src/tilda.ui:246 -msgid "Custom" -msgstr "" - -#: src/tilda.ui:217 -msgid "Green on Black" -msgstr "" - -#: src/tilda.ui:220 -msgid "Black on White" -msgstr "" - -#: src/tilda.ui:223 -msgid "White on Black" -msgstr "" - -#: src/tilda.ui:226 -msgid "Zenburn" -msgstr "" - -#: src/tilda.ui:229 -msgid "Solarized Light" -msgstr "" - -#: src/tilda.ui:232 -msgid "Solarized Dark" -msgstr "" - -#: src/tilda.ui:235 -msgid "Snazzy" -msgstr "" - -#: src/tilda.ui:257 -msgid "On the Left" -msgstr "" - -#: src/tilda.ui:260 -msgid "On the Right" -msgstr "" - -#: src/tilda.ui:263 -msgid "Disabled" -msgstr "" - -#: src/tilda.ui:274 src/tilda.ui:291 -msgid "ASCII DEL" -msgstr "" - -#: src/tilda.ui:277 src/tilda.ui:294 -msgid "Escape sequence" -msgstr "" - -#: src/tilda.ui:280 src/tilda.ui:297 -msgid "Control-H" -msgstr "" - -#: src/tilda.ui:314 -msgid "Tilda Config" -msgstr "" - -#: src/tilda.ui:395 -msgid "Start Tilda hidden" -msgstr "" - -#: src/tilda.ui:409 -msgid "Always on top" -msgstr "" - -#: src/tilda.ui:423 -msgid "Display on all workspaces" -msgstr "" - -#: src/tilda.ui:437 -msgid "Do not show in taskbar" -msgstr "" - -#: src/tilda.ui:451 -msgid "Show Notebook Border" -msgstr "" - -#: src/tilda.ui:465 -msgid "Set as Desktop window" -msgstr "" - -#: src/tilda.ui:480 -msgid "Start in fullscreen" -msgstr "" - -#: src/tilda.ui:509 -msgid "Non-focus Pull Up Behaviour:" -msgstr "" - -#: src/tilda.ui:560 -msgid "Window Display" -msgstr "" - -#: src/tilda.ui:598 -msgid "Cursor Blinks" -msgstr "" - -#: src/tilda.ui:612 -msgid "Audible Terminal Bell" -msgstr "" - -#: src/tilda.ui:628 -msgid "Cursor Shape: " -msgstr "" - -#: src/tilda.ui:663 -msgid "Terminal Display" -msgstr "" - -#: src/tilda.ui:703 -msgid "Font:" -msgstr "" - -#: src/tilda.ui:733 -msgid "Font" -msgstr "" - -#: src/tilda.ui:782 -msgid "Hide Tilda when mouse leaves it" -msgstr "" - -#: src/tilda.ui:799 -msgid "Auto Hide Delay:" -msgstr "" - -#: src/tilda.ui:809 -msgid "Hide when Tilda loses focus" -msgstr "" - -#: src/tilda.ui:829 -msgid "Auto Hide" -msgstr "" - -#: src/tilda.ui:868 -msgid "When last terminal is closed:" -msgstr "" - -#: src/tilda.ui:895 -msgid "Always prompt on exit" -msgstr "" - -#: src/tilda.ui:918 -msgid "Program Exit" -msgstr "" - -#: src/tilda.ui:936 -msgid "" -"Note: Some options require that tilda is restarted." -msgstr "" - -#: src/tilda.ui:953 -msgid "General" -msgstr "" - -#: src/tilda.ui:998 -msgid "Word Characters:" -msgstr "" - -#: src/tilda.ui:1026 -msgid "Select by Word" -msgstr "" - -#: src/tilda.ui:1076 -msgid "Web Browser *:" -msgstr "" - -#: src/tilda.ui:1093 -msgid "URL Handling" -msgstr "" - -#: src/tilda.ui:1128 -msgid "Initial Title:" -msgstr "" - -#: src/tilda.ui:1150 -msgid "Title Max Length:" -msgstr "" - -#: src/tilda.ui:1191 -msgid "Dynamically-set Title:" -msgstr "" - -#: src/tilda.ui:1203 -msgid "Title Behaviour:" -msgstr "" - -#: src/tilda.ui:1236 -msgid "Title" -msgstr "" - -#: src/tilda.ui:1297 -msgid "Run a custom command instead of the shell" -msgstr "" - -#: src/tilda.ui:1313 -msgid "Custom Command:" -msgstr "" - -#: src/tilda.ui:1325 -msgid "When Command Exits:" -msgstr "" - -#: src/tilda.ui:1335 -msgid "Use a login shell" -msgstr "" - -#: src/tilda.ui:1361 -msgid "Command" -msgstr "" - -#: src/tilda.ui:1388 -msgid "" -"* A valid command that can open a browser must be entered here. It is " -"possible to use the name of a specific browser such as 'firefox' and 'google-" -"chrome' or to use the generic commands 'x-www-browser' and 'xdg-open'. The " -"best command may be different depending on the system." -msgstr "" - -#: src/tilda.ui:1425 -msgid "Show confirmation dialog when closing tab" -msgstr "" - -#: src/tilda.ui:1445 -msgid "Close Action" -msgstr "" - -#: src/tilda.ui:1466 -msgid "Title and Command" -msgstr "" - -#: src/tilda.ui:1510 src/tilda.ui:1688 -msgid "Percentage" -msgstr "" - -#: src/tilda.ui:1534 src/tilda.ui:1700 -msgid "In Pixels" -msgstr "" - -#: src/tilda.ui:1561 -msgid "Height" -msgstr "" - -#: src/tilda.ui:1597 -msgid "Monitor:" -msgstr "" - -#: src/tilda.ui:1652 -msgid "Select monitor" -msgstr "" - -#: src/tilda.ui:1739 -msgid "Width" -msgstr "" - -#: src/tilda.ui:1775 -msgid "Centered Horizontally" -msgstr "" - -#: src/tilda.ui:1793 -msgid "Y Position" -msgstr "" - -#: src/tilda.ui:1827 -msgid "X Position" -msgstr "" - -#: src/tilda.ui:1837 -msgid "Centered Vertically" -msgstr "" - -#: src/tilda.ui:1865 -msgid "Position" -msgstr "" - -#: src/tilda.ui:1903 -msgid "Position of Tabs:" -msgstr "" - -#: src/tilda.ui:1930 -msgid "Expand Tabs" -msgstr "" - -#: src/tilda.ui:1944 -msgid "Show single Tab" -msgstr "" - -#: src/tilda.ui:1958 -msgid "Display Title in Tooltip" -msgstr "" - -#: src/tilda.ui:1981 -msgid "Tabs" -msgstr "" - -#: src/tilda.ui:2030 -msgid "Animation Delay (usec)" -msgstr "" - -#: src/tilda.ui:2042 -msgid "Animation Orientation" -msgstr "" - -#: src/tilda.ui:2080 -msgid "Animated Pulldown" -msgstr "" - -#: src/tilda.ui:2096 -msgid "Level of Transparency" -msgstr "" - -#: src/tilda.ui:2106 -msgid "Enable Transparency" -msgstr "" - -#: src/tilda.ui:2129 -msgid "Extras" -msgstr "" - -#: src/tilda.ui:2148 -msgid "Appearance" -msgstr "" - -#: src/tilda.ui:2217 -msgid "Cursor Color" -msgstr "" - -#: src/tilda.ui:2265 -msgid "Text Color" -msgstr "" - -#: src/tilda.ui:2277 -msgid "Background Color" -msgstr "" - -#: src/tilda.ui:2289 -msgid "Built-in Schemes" -msgstr "" - -#: src/tilda.ui:2303 -msgid "Foreground and Background Colors" -msgstr "" - -#: src/tilda.ui:2335 -msgid "" -"Note: Terminal applications have these colors available to " -"them." -msgstr "" - -#: src/tilda.ui:2378 -msgid "Choose Color 14" -msgstr "" - -#: src/tilda.ui:2391 -msgid "Choose Color 13" -msgstr "" - -#: src/tilda.ui:2404 -msgid "Choose Color 15" -msgstr "" - -#: src/tilda.ui:2417 -msgid "Choose Color 12" -msgstr "" - -#: src/tilda.ui:2430 -msgid "Choose Color 10" -msgstr "" - -#: src/tilda.ui:2443 -msgid "Choose Color 11" -msgstr "" - -#: src/tilda.ui:2456 -msgid "Choose Color 9" -msgstr "" - -#: src/tilda.ui:2469 -msgid "Choose Color 7" -msgstr "" - -#: src/tilda.ui:2482 -msgid "Choose Color 6" -msgstr "" - -#: src/tilda.ui:2495 -msgid "Choose Color 5" -msgstr "" - -#: src/tilda.ui:2508 -msgid "Choose Color 4" -msgstr "" - -#: src/tilda.ui:2521 -msgid "Choose Color 3" -msgstr "" - -#: src/tilda.ui:2534 -msgid "Choose Color 2" -msgstr "" - -#: src/tilda.ui:2547 -msgid "Choose Color 1" -msgstr "" - -#: src/tilda.ui:2560 -msgid "Choose Color 0" -msgstr "" - -#: src/tilda.ui:2574 -msgid "Choose Color 8" -msgstr "" - -#: src/tilda.ui:2591 -msgid "Built-in schemes:" -msgstr "" - -#: src/tilda.ui:2606 -msgid "Color palette:" -msgstr "" - -#: src/tilda.ui:2622 -msgid "Palette" -msgstr "" - -#: src/tilda.ui:2641 -msgid "Colors" -msgstr "" - -#: src/tilda.ui:2698 -msgid "Scrollbar is:" -msgstr "" - -#: src/tilda.ui:2707 -msgid "Limit scrollback to:" -msgstr "" - -#: src/tilda.ui:2711 -msgid "Unselect for unlimited scrollback." -msgstr "" - -#: src/tilda.ui:2723 -msgid "Scroll on Output" -msgstr "" - -#: src/tilda.ui:2737 -msgid "Scroll on Keystroke" -msgstr "" - -#: src/tilda.ui:2759 -msgid "0" -msgstr "" - -#: src/tilda.ui:2771 -msgid "lines" -msgstr "" - -#: src/tilda.ui:2797 -msgid "Scrolling" -msgstr "" - -#: src/tilda.ui:2818 -msgid "Scrolling" -msgstr "" - -#: src/tilda.ui:2857 -msgid "" -"Note: These options may cause some applications to behave " -"incorrectly. They are only here to allow you to work around certain " -"applications and operating systems that expect different terminal behavior." -msgstr "" - -#: src/tilda.ui:2873 -msgid "_Backspace key generates:" -msgstr "" - -#: src/tilda.ui:2887 -msgid "_Delete key generates:" -msgstr "" - -#: src/tilda.ui:2899 -msgid "_Reset Compatibility Options to Defaults" -msgstr "" - -#: src/tilda.ui:2953 -msgid "Compatibility" -msgstr "" - -#: src/tilda.ui:2972 -msgid "Compatibility" -msgstr "" - -#: src/tilda.ui:3024 -msgid "Keybindings" -msgstr "" - -#: src/tilda.ui:3043 -msgid "Keybindings" -msgstr "" - -#: src/configsys.c:384 -msgid "Unable to sync the config file to disk\n" -msgstr "" - -#: src/configsys.c:394 -msgid "Unable to close the config file\n" -msgstr "" - -#: src/configsys.c:407 -#, c-format -msgid "Unable to write the config file to %s\n" -msgstr "" - -#: src/tilda.c:239 -#, c-format -msgid "Unable to run command: `%s'\n" -msgstr "" - -#: src/tilda.c:284 src/tilda.c:459 -#, c-format -msgid "Unable to open lock directory: %s\n" -msgstr "" - -#: src/tilda.c:396 -#, c-format -msgid "Creating directory:'%s'\n" -msgstr "" - -#: src/tilda.c:555 -msgid "" -"Found style.css in the user config directory, applying user css style.\n" -msgstr "" - -#: src/tilda.c:610 -msgid "Migrating old config path to XDG folders\n" -msgstr "" - -#: src/tilda.c:673 -#, c-format -msgid "Specified config file '%s' does not exist. Reverting to default path.\n" -msgstr "" - -#: src/tilda.c:766 src/tilda-keybinding.c:409 -msgid "" -"The keybinding you chose for \"Pull Down Terminal\" is invalid. Please " -"choose another." -msgstr "" - -#: src/tilda-keybinding.c:115 -msgid "Action" -msgstr "" - -#: src/tilda-keybinding.c:121 -msgid "Shortcut" -msgstr "" - -#: src/tilda-keybinding.c:306 -msgid "Enter keyboard shortcut" -msgstr "" - -#: src/tilda-keybinding.c:417 -#, c-format -msgid "The keybinding you chose for \"%s\" is invalid. Please choose another." -msgstr "" - -#: src/tilda_terminal.c:395 -#, c-format -msgid "Problem reading link %s: %s\n" -msgstr "" - -#: src/tilda_terminal.c:418 -#, c-format -msgid "Unable to launch default shell: %s\n" -msgstr "" - -#: src/tilda_terminal.c:420 -#, c-format -msgid "Unable to launch custom command: %s\n" -msgstr "" - -#: src/tilda_terminal.c:421 -#, c-format -msgid "Launching custom command failed with error: %s\n" -msgstr "" - -#: src/tilda_terminal.c:422 src/tilda_terminal.c:456 -msgid "Launching default shell instead\n" -msgstr "" - -#: src/tilda_terminal.c:455 -#, c-format -msgid "Problem parsing custom command: %s\n" -msgstr "" - -#: src/tilda_terminal.c:985 -#, c-format -msgid "Failed to launch the web browser. The command was `%s'\n" -msgstr "" - -#: src/tilda_terminal.c:1035 -msgid "Untitled" -msgstr "" - -#: src/tilda_terminal.c:1053 -msgid "Bad value for \"d_set_title\" in config file\n" -msgstr "" - -#: src/tilda_window.c:109 -msgid "Are you sure you want to close this tab?" -msgstr "" - -#: src/tilda_window.c:156 -msgid "You have a bad tab_pos in your configuration file\n" -msgstr "" - -#: src/tilda_window.c:811 -#, c-format -msgid "Unable to set tilda's icon: %s\n" -msgstr "" - -#: src/tilda_window.c:1132 -msgid "Out of memory, cannot create tab\n" -msgstr "" - -#: src/tilda_window.c:1252 -msgid "Are you sure you want to Quit?" -msgstr "" - -#: src/wizard.c:138 -#, c-format -msgid "Tilda %d Config" -msgstr "" - -#: src/wizard.c:561 -msgid "Invalid Cursor Type, resetting to default\n" -msgstr "" - -#: src/wizard.c:579 -msgid "Invalid non-focus pull up behaviour, ignoring\n" -msgstr "" - -#: src/wizard.c:1046 -msgid "Invalid tab position setting, ignoring\n" -msgstr "" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/tr.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/tr.gmo differ diff -Nru tilda-1.5.2/po/tr.po tilda-1.5.4/po/tr.po --- tilda-1.5.2/po/tr.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/tr.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2007-05-22 18:11+0000\n" "Last-Translator: Alperen Yusuf Aybar \n" "Language-Team: Turkish \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/zh_CN.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/zh_CN.gmo differ diff -Nru tilda-1.5.2/po/zh_CN.po tilda-1.5.4/po/zh_CN.po --- tilda-1.5.2/po/zh_CN.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/zh_CN.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2018-03-19 12:53+0800\n" "Last-Translator: Boyuan Yang <073plan@gmail.com>\n" "Language-Team: Chinese (China) \n" Binary files /tmp/tmp8WWgIp/gfHCgWm04j/tilda-1.5.2/po/zh_TW.gmo and /tmp/tmp8WWgIp/BPXjqYZxTx/tilda-1.5.4/po/zh_TW.gmo differ diff -Nru tilda-1.5.2/po/zh_TW.po tilda-1.5.4/po/zh_TW.po --- tilda-1.5.2/po/zh_TW.po 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/po/zh_TW.po 2020-12-24 10:31:23.000000000 +0000 @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: tilda\n" "Report-Msgid-Bugs-To: sloutri@iit.edu\n" -"POT-Creation-Date: 2020-05-10 14:15+0000\n" +"POT-Creation-Date: 2020-05-09 12:39+0200\n" "PO-Revision-Date: 2017-07-18 00:31+0800\n" "Last-Translator: Kuang-Lin Pan \n" "Language-Team: Chinese (Traditional) \n" diff -Nru tilda-1.5.2/src/glade-resources.c tilda-1.5.4/src/glade-resources.c --- tilda-1.5.2/src/glade-resources.c 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/src/glade-resources.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,1418 +0,0 @@ -#include - -#if defined (__ELF__) && ( __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 6)) -# define SECTION __attribute__ ((section (".gresource.glade_resources"), aligned (8))) -#else -# define SECTION -#endif - -static const SECTION union { const guint8 data[10047]; const double alignment; void * const ptr;} glade_resources_resource_data = { { - 0x47, 0x56, 0x61, 0x72, 0x69, 0x61, 0x6e, 0x74, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x00, 0x00, 0x00, 0xc8, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x28, 0x06, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, - 0x02, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, - 0x05, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, - 0xc2, 0x84, 0x46, 0xe4, 0x03, 0x00, 0x00, 0x00, - 0xc8, 0x00, 0x00, 0x00, 0x08, 0x00, 0x76, 0x00, - 0xd0, 0x00, 0x00, 0x00, 0xdf, 0x20, 0x00, 0x00, - 0x4b, 0x50, 0x90, 0x0b, 0x02, 0x00, 0x00, 0x00, - 0xdf, 0x20, 0x00, 0x00, 0x04, 0x00, 0x4c, 0x00, - 0xe4, 0x20, 0x00, 0x00, 0xe8, 0x20, 0x00, 0x00, - 0xd4, 0xb5, 0x02, 0x00, 0xff, 0xff, 0xff, 0xff, - 0xe8, 0x20, 0x00, 0x00, 0x01, 0x00, 0x4c, 0x00, - 0xec, 0x20, 0x00, 0x00, 0xf0, 0x20, 0x00, 0x00, - 0x68, 0x81, 0x1b, 0x4e, 0x01, 0x00, 0x00, 0x00, - 0xf0, 0x20, 0x00, 0x00, 0x06, 0x00, 0x4c, 0x00, - 0xf8, 0x20, 0x00, 0x00, 0x04, 0x21, 0x00, 0x00, - 0x9b, 0xfe, 0xb1, 0xb3, 0x03, 0x00, 0x00, 0x00, - 0x04, 0x21, 0x00, 0x00, 0x13, 0x00, 0x76, 0x00, - 0x18, 0x21, 0x00, 0x00, 0x27, 0x25, 0x00, 0x00, - 0x09, 0x45, 0xeb, 0xe2, 0x03, 0x00, 0x00, 0x00, - 0x27, 0x25, 0x00, 0x00, 0x07, 0x00, 0x76, 0x00, - 0x30, 0x25, 0x00, 0x00, 0x3f, 0x27, 0x00, 0x00, - 0x74, 0x69, 0x6c, 0x64, 0x61, 0x2e, 0x75, 0x69, - 0x24, 0x9a, 0x02, 0x00, 0x01, 0x00, 0x00, 0x00, - 0x78, 0xda, 0xed, 0x5d, 0xdb, 0x92, 0xdb, 0x38, - 0x92, 0x7d, 0xef, 0xaf, 0xc0, 0xea, 0x61, 0x7a, - 0x66, 0x76, 0xe5, 0x12, 0x75, 0xa9, 0x2a, 0xf7, - 0xd8, 0x35, 0x51, 0x37, 0xb7, 0x1d, 0xed, 0xb6, - 0x1d, 0x56, 0xb9, 0x7b, 0x77, 0x5f, 0x18, 0x10, - 0x09, 0x49, 0xe8, 0xa2, 0x08, 0x36, 0x49, 0x95, - 0x4a, 0x8e, 0xf9, 0x87, 0x7d, 0xdc, 0xff, 0xdb, - 0x2f, 0x59, 0x00, 0xa4, 0x6e, 0x25, 0x92, 0xe2, - 0x4d, 0x12, 0x09, 0x65, 0x74, 0x84, 0xbb, 0x28, - 0x89, 0x49, 0x02, 0xc8, 0x4c, 0xe4, 0xe5, 0x20, - 0xf3, 0xcd, 0x3f, 0x9f, 0x27, 0x16, 0x7a, 0x22, - 0xae, 0x47, 0x99, 0xfd, 0xb6, 0xa1, 0xbd, 0x6a, - 0x35, 0x10, 0xb1, 0x0d, 0x66, 0x52, 0x7b, 0xf4, - 0xb6, 0xf1, 0xed, 0xe1, 0x5d, 0xf3, 0xb2, 0xf1, - 0xcf, 0xab, 0x1f, 0xde, 0xfc, 0x5b, 0xb3, 0x89, - 0x7e, 0x26, 0x36, 0x71, 0xb1, 0x4f, 0x4c, 0x34, - 0xa3, 0xfe, 0x18, 0x8d, 0x2c, 0x6c, 0x12, 0xd4, - 0x79, 0xd5, 0x6e, 0xbf, 0xd2, 0x50, 0xb3, 0xc9, - 0x7f, 0x44, 0x6d, 0x9f, 0xb8, 0x43, 0x6c, 0x90, - 0xab, 0x1f, 0x10, 0x7a, 0xe3, 0x92, 0x3f, 0xa7, - 0xd4, 0x25, 0x1e, 0xb2, 0xe8, 0xe0, 0x6d, 0x63, - 0xe4, 0x3f, 0xfe, 0x7b, 0x63, 0xf5, 0xa0, 0xce, - 0x2b, 0xad, 0xd5, 0x38, 0x93, 0xbf, 0x63, 0x83, - 0x3f, 0x88, 0xe1, 0x23, 0xc3, 0xc2, 0x9e, 0xf7, - 0xb6, 0xf1, 0xb3, 0xff, 0x78, 0x6d, 0xfe, 0x31, - 0xf5, 0xfc, 0x09, 0xb1, 0xfd, 0x06, 0xa2, 0xe6, - 0xdb, 0x06, 0x5e, 0x5e, 0x6b, 0x0d, 0x71, 0x07, - 0xbf, 0xc7, 0x71, 0x99, 0x43, 0x5c, 0x7f, 0x8e, - 0x6c, 0x3c, 0x21, 0x6f, 0x1b, 0x53, 0x87, 0x5f, - 0x35, 0xae, 0xb4, 0x56, 0xeb, 0xcd, 0xd9, 0xe2, - 0xab, 0xe8, 0x5f, 0x7a, 0x3e, 0x71, 0x74, 0x6a, - 0x1b, 0x2e, 0x91, 0xf4, 0xaf, 0xb4, 0x5d, 0x37, - 0x38, 0x78, 0x44, 0x36, 0x6e, 0x78, 0xf1, 0x88, - 0x37, 0x67, 0xc1, 0xfb, 0x67, 0x1e, 0x4a, 0x2b, - 0x79, 0x2c, 0x6d, 0xad, 0x7b, 0xd1, 0xbd, 0xec, - 0x9c, 0x77, 0x2f, 0xea, 0x33, 0x24, 0x85, 0x96, - 0xa7, 0xad, 0xce, 0x50, 0x3a, 0xea, 0x0c, 0xa5, - 0xab, 0xce, 0x50, 0x7a, 0xea, 0x0c, 0xe5, 0x5c, - 0x9d, 0xa1, 0x5c, 0xa8, 0x33, 0x94, 0x4b, 0x75, - 0x86, 0xf2, 0x3a, 0x66, 0x28, 0x16, 0x9b, 0xc9, - 0xa1, 0xec, 0x7a, 0xaf, 0xcc, 0x5b, 0xea, 0x13, - 0xb6, 0xa6, 0x24, 0x05, 0xe1, 0x03, 0xcf, 0xd0, - 0x47, 0xea, 0xf9, 0x7d, 0x9f, 0xb9, 0x24, 0x98, - 0x20, 0x8b, 0x5f, 0x7a, 0xe2, 0x72, 0xb9, 0xef, - 0x1a, 0xcc, 0x9a, 0x4e, 0x6c, 0x2f, 0xb8, 0xe2, - 0xd7, 0xc2, 0x6a, 0x0b, 0x3e, 0x6b, 0x8a, 0xe7, - 0xa3, 0x91, 0x31, 0xc6, 0x2e, 0x76, 0x5d, 0x3c, - 0x0f, 0x2c, 0xb6, 0xf0, 0x67, 0xc1, 0x4f, 0x90, - 0x3f, 0x77, 0xf8, 0x2b, 0xae, 0x7e, 0x13, 0xd8, - 0x67, 0xe2, 0xa5, 0x36, 0xe8, 0xbe, 0x31, 0xb1, - 0x8f, 0x97, 0xf7, 0xba, 0x6c, 0xb6, 0xf8, 0x3b, - 0xa0, 0x24, 0x5f, 0x8d, 0x5b, 0x91, 0xbe, 0x8b, - 0x6d, 0xcf, 0xe2, 0x3f, 0x1d, 0x58, 0x9c, 0xea, - 0x9c, 0x78, 0x8d, 0xab, 0x5b, 0x8b, 0x79, 0x04, - 0x3d, 0x50, 0xcb, 0xc4, 0x92, 0xe6, 0x92, 0xc8, - 0xd9, 0x1a, 0x95, 0x4c, 0x14, 0x3f, 0x3b, 0xc4, - 0x46, 0x18, 0xd9, 0x64, 0x86, 0xb8, 0xe9, 0x39, - 0xa1, 0x36, 0xb6, 0xf6, 0x47, 0x19, 0x61, 0xdb, - 0x44, 0x63, 0x6a, 0x92, 0xb8, 0x47, 0xbc, 0x39, - 0x5b, 0x4c, 0x4d, 0xa6, 0x75, 0x9c, 0x30, 0x93, - 0x58, 0x39, 0xd6, 0xf0, 0x18, 0x4b, 0xf8, 0xc0, - 0x9c, 0x92, 0x26, 0xf8, 0x86, 0xf9, 0x3e, 0x9b, - 0x94, 0x44, 0xec, 0x23, 0x19, 0xfa, 0x25, 0x91, - 0xfa, 0x4a, 0x47, 0xe3, 0xb2, 0x68, 0xbd, 0xa7, - 0xa6, 0x49, 0xec, 0xbd, 0xb0, 0x4b, 0xab, 0x1e, - 0xfc, 0xf2, 0x8e, 0x19, 0x53, 0x0f, 0x3d, 0x94, - 0x2b, 0x9b, 0x7c, 0x5a, 0xc9, 0x4e, 0x9a, 0x85, - 0x66, 0xb7, 0x26, 0xd2, 0x78, 0x63, 0x31, 0xe3, - 0x11, 0xdd, 0x4e, 0x5d, 0x8f, 0xb9, 0x25, 0xcd, - 0xed, 0x87, 0x1b, 0x82, 0x27, 0xe5, 0x92, 0xfc, - 0x66, 0x9b, 0xc4, 0xb5, 0xa8, 0x4d, 0x76, 0x90, - 0x2d, 0xb4, 0x62, 0xed, 0x7a, 0xac, 0x58, 0x7f, - 0xcc, 0x66, 0x68, 0x36, 0x66, 0x16, 0x41, 0xfc, - 0x63, 0xe4, 0x53, 0xdf, 0x22, 0x25, 0x4d, 0xb3, - 0x24, 0x3d, 0xa4, 0xae, 0xe7, 0x23, 0x1b, 0x89, - 0x11, 0x78, 0x88, 0x0d, 0xcb, 0x7f, 0x02, 0x5f, - 0x86, 0xf4, 0x0f, 0x28, 0xb2, 0xa4, 0x35, 0x59, - 0xd1, 0x0f, 0x9e, 0xfd, 0xa3, 0x8f, 0x4c, 0xea, - 0x39, 0x16, 0x9e, 0x13, 0xb3, 0xa4, 0xa9, 0xfe, - 0x99, 0x11, 0x0f, 0xe1, 0x21, 0x37, 0x3d, 0x10, - 0xb5, 0xa9, 0x4f, 0xb9, 0xf5, 0x51, 0xe6, 0x4a, - 0x4a, 0xf2, 0x03, 0x32, 0xe4, 0x33, 0xbe, 0x17, - 0xfa, 0x5f, 0x09, 0x9f, 0x0d, 0x23, 0x25, 0xed, - 0x22, 0x4c, 0xd2, 0xa9, 0x07, 0x93, 0xdc, 0x71, - 0x1b, 0x1f, 0xf9, 0x0c, 0xf9, 0x63, 0x82, 0x4c, - 0x32, 0xc4, 0x53, 0xcb, 0x47, 0xde, 0x98, 0x58, - 0x56, 0x69, 0xf3, 0xed, 0xf9, 0xd8, 0xf5, 0x25, - 0x7d, 0x83, 0x4d, 0x26, 0xdc, 0x52, 0x2d, 0x89, - 0xf2, 0xfd, 0x33, 0x0d, 0xc8, 0xfa, 0x7b, 0xdc, - 0x6f, 0xbb, 0x60, 0xfc, 0xd6, 0xc0, 0xf8, 0x2d, - 0xb2, 0xc2, 0xbd, 0x7a, 0xac, 0xf0, 0xed, 0xd4, - 0x2b, 0x6f, 0x5d, 0x7e, 0x76, 0x09, 0xf7, 0x21, - 0x99, 0x8d, 0x6e, 0xb8, 0x2e, 0x7c, 0x2c, 0x8b, - 0x73, 0x04, 0x2d, 0x41, 0xf4, 0xf7, 0x31, 0xf5, - 0xcb, 0x52, 0xd7, 0x92, 0x56, 0xd9, 0x6f, 0xfa, - 0xdf, 0xc4, 0x1e, 0x4c, 0x5d, 0xbb, 0x2c, 0xdb, - 0x83, 0x59, 0xd8, 0xa5, 0xdf, 0x89, 0x89, 0x3e, - 0x96, 0xe8, 0xa0, 0xad, 0xa8, 0xde, 0x61, 0xb7, - 0xac, 0x81, 0xf7, 0x6d, 0xfc, 0xfd, 0xfb, 0x7c, - 0x1f, 0x52, 0x74, 0xae, 0x82, 0x14, 0x15, 0x99, - 0x80, 0x8b, 0x7a, 0x4c, 0xc0, 0x67, 0x5b, 0x6e, - 0x99, 0x25, 0x2a, 0xe6, 0x90, 0x62, 0x99, 0xc1, - 0x89, 0x3b, 0xea, 0x89, 0x2b, 0x73, 0x1f, 0xeb, - 0x74, 0x59, 0x8f, 0x75, 0xba, 0xee, 0xdf, 0x7e, - 0xf8, 0x80, 0xee, 0xee, 0x3f, 0x96, 0x65, 0x2c, - 0x79, 0x06, 0x76, 0x08, 0xf2, 0xc8, 0x9f, 0x53, - 0x62, 0x1b, 0x65, 0x69, 0xe7, 0x5b, 0x66, 0xfb, - 0x2e, 0xb3, 0x9a, 0xef, 0xf7, 0xb1, 0x52, 0xaf, - 0x61, 0xa5, 0xea, 0xb0, 0x52, 0xdc, 0x8f, 0x62, - 0xae, 0x2e, 0x22, 0xfe, 0xba, 0x0c, 0xf9, 0xa7, - 0x5d, 0xb5, 0xc5, 0x9d, 0x8e, 0x35, 0x1d, 0xe9, - 0xf2, 0x93, 0xf4, 0x8b, 0x17, 0x41, 0xce, 0x9e, - 0x4e, 0x06, 0xdc, 0x25, 0x8d, 0xa5, 0x41, 0x6d, - 0x3f, 0xe1, 0xee, 0xd0, 0x49, 0xce, 0xfa, 0x1e, - 0x1b, 0x4c, 0x94, 0x3c, 0x6f, 0x77, 0xdc, 0xd9, - 0x64, 0xa3, 0x60, 0xd2, 0x66, 0xf4, 0x3b, 0x76, - 0x4d, 0x7d, 0x46, 0x6d, 0x93, 0xcd, 0x62, 0x32, - 0x48, 0x06, 0xb6, 0xf5, 0xa1, 0x08, 0x51, 0x36, - 0xae, 0xde, 0x61, 0xcb, 0x23, 0xbb, 0xf2, 0x37, - 0x03, 0xe6, 0x9a, 0xc4, 0xe5, 0x34, 0x4d, 0x7f, - 0xdc, 0xb8, 0xea, 0xed, 0xfa, 0xb9, 0x74, 0x7b, - 0xa3, 0x5d, 0x09, 0x91, 0x04, 0x41, 0x9c, 0x5f, - 0x86, 0x74, 0xb4, 0x8b, 0x4a, 0x30, 0x02, 0xdd, - 0x61, 0x1e, 0x77, 0xa6, 0x99, 0xdd, 0xb8, 0x32, - 0x88, 0x00, 0xda, 0xec, 0x7c, 0x38, 0x9f, 0x4e, - 0x7d, 0x2c, 0x56, 0xe4, 0xca, 0x66, 0xee, 0x44, - 0x78, 0x6e, 0x2f, 0x6e, 0xf0, 0xe8, 0x48, 0xa4, - 0x35, 0x82, 0x9f, 0x9b, 0xdc, 0x85, 0x74, 0xd9, - 0xbc, 0x81, 0xc6, 0xdc, 0x79, 0xb4, 0x88, 0xcb, - 0x07, 0x3b, 0xe5, 0x4e, 0x8a, 0xad, 0x87, 0xf3, - 0x68, 0x88, 0xe4, 0x0d, 0xff, 0x97, 0x1a, 0x8f, - 0x84, 0x5f, 0x0d, 0x1a, 0xc8, 0x9b, 0x61, 0xc7, - 0x21, 0x7c, 0xa6, 0x6d, 0xb6, 0x5c, 0x2a, 0x63, - 0xcc, 0x07, 0xb6, 0x5c, 0x58, 0x19, 0x04, 0x18, - 0x33, 0x8b, 0xcf, 0xd9, 0x6a, 0x2d, 0x57, 0xbf, - 0x08, 0x7e, 0x8d, 0x24, 0x6c, 0x88, 0xbf, 0x48, - 0x53, 0x5e, 0xbe, 0x6d, 0x3c, 0x0d, 0xd8, 0x73, - 0x63, 0x49, 0x63, 0x6b, 0x8d, 0x6f, 0xf8, 0xb7, - 0x72, 0x81, 0x4d, 0xb9, 0xd8, 0x4d, 0xf1, 0x73, - 0xad, 0xb1, 0x26, 0xa3, 0x2f, 0x93, 0x79, 0xd4, - 0xa3, 0x7c, 0xe2, 0xf9, 0x9c, 0xbb, 0xd3, 0xad, - 0x05, 0xce, 0xc3, 0x14, 0x51, 0xf7, 0x90, 0x27, - 0xbe, 0x26, 0xc2, 0xe6, 0xbf, 0xfb, 0x45, 0xff, - 0xf2, 0xf9, 0xc3, 0xa7, 0x87, 0xfb, 0xaf, 0xfa, - 0xaf, 0x9f, 0x1f, 0x3e, 0x7c, 0xfe, 0xa4, 0xff, - 0x7a, 0xdd, 0xff, 0x05, 0xfd, 0x0b, 0x45, 0x7c, - 0xf3, 0x9e, 0x5f, 0xad, 0x7f, 0x7d, 0xf3, 0xed, - 0xe1, 0x81, 0x7f, 0xfc, 0xe5, 0xeb, 0x7d, 0xbf, - 0x1f, 0xf1, 0xf9, 0xd7, 0xfb, 0x8f, 0xf7, 0xd7, - 0xfd, 0x7b, 0xf9, 0x4d, 0x9a, 0x77, 0x62, 0x2e, - 0xe5, 0x2f, 0x85, 0x03, 0x9e, 0x79, 0xe2, 0x5f, - 0x50, 0x63, 0x9b, 0x09, 0x22, 0xd3, 0x9a, 0x0e, - 0x36, 0xa8, 0x3d, 0x6a, 0x5c, 0xb5, 0x23, 0x7f, - 0x1d, 0xbd, 0x6a, 0xd8, 0x10, 0x0f, 0xd2, 0xb1, - 0x4b, 0xf0, 0xda, 0x62, 0x44, 0x2e, 0xa0, 0xe4, - 0xab, 0x97, 0xcb, 0xb8, 0x76, 0xbf, 0xb6, 0x41, - 0x20, 0xc7, 0x8a, 0xe6, 0x5d, 0xd5, 0xaa, 0xae, - 0x6c, 0x64, 0xf2, 0x1b, 0xcf, 0xd9, 0x54, 0xec, - 0x06, 0x73, 0x31, 0x13, 0x44, 0x04, 0x7c, 0x62, - 0x6e, 0xdc, 0x90, 0xc9, 0x15, 0xb9, 0x2d, 0xd9, - 0x5c, 0x7e, 0x75, 0x16, 0x71, 0x47, 0x0c, 0x95, - 0x98, 0xc5, 0x0d, 0x56, 0x36, 0x42, 0x81, 0x34, - 0x5e, 0x52, 0x88, 0x1a, 0xd8, 0x80, 0x58, 0x8d, - 0xab, 0x91, 0xff, 0xd8, 0x94, 0xb7, 0xc4, 0x8d, - 0x2b, 0x37, 0x67, 0x14, 0xe1, 0x8e, 0xa8, 0x7b, - 0x5d, 0x62, 0x10, 0xfa, 0x44, 0x3c, 0x3d, 0x8c, - 0xec, 0xe5, 0x20, 0x31, 0xe5, 0xaa, 0x95, 0xef, - 0xeb, 0xc6, 0x63, 0x8a, 0x37, 0xdf, 0xd0, 0xda, - 0xa1, 0x3e, 0x2e, 0xa6, 0xb5, 0xd7, 0x97, 0x7e, - 0xb5, 0xbb, 0x6e, 0xbe, 0x2f, 0x36, 0x1e, 0xb9, - 0x4a, 0xd8, 0x3d, 0x12, 0xf2, 0xec, 0xf0, 0x37, - 0xc9, 0x31, 0x05, 0x43, 0x6a, 0x59, 0xd9, 0xd7, - 0x6d, 0xb5, 0x29, 0x6a, 0xf1, 0xb7, 0xf1, 0x6f, - 0xa2, 0x5e, 0x3f, 0x82, 0xcf, 0xa3, 0xc6, 0x1f, - 0x3d, 0xf6, 0x5c, 0xe3, 0xce, 0x3e, 0xe6, 0x6d, - 0x00, 0x89, 0xf1, 0xa8, 0x8b, 0x9d, 0x3d, 0x59, - 0xe4, 0x63, 0x67, 0xa9, 0x15, 0x7d, 0x4b, 0xc4, - 0x0c, 0x6d, 0xcd, 0xce, 0xb6, 0x06, 0xd8, 0x96, - 0xfe, 0x4f, 0xcc, 0x27, 0x03, 0xc6, 0x1e, 0x37, - 0x2c, 0x30, 0x7b, 0xf1, 0xe1, 0x31, 0xb5, 0x7a, - 0x4a, 0xf5, 0xf5, 0xb3, 0x4b, 0xcd, 0xe0, 0xe5, - 0x47, 0xfc, 0x2f, 0x7d, 0x24, 0x21, 0xcf, 0x56, - 0xa3, 0xa2, 0x9a, 0x27, 0xb0, 0x8b, 0xf5, 0x31, - 0x9b, 0x30, 0xf1, 0xa6, 0x4c, 0x10, 0xd9, 0xf9, - 0xfc, 0xc8, 0x99, 0x88, 0x9e, 0x8d, 0x77, 0x2e, - 0x7f, 0x4c, 0x30, 0x1d, 0x43, 0xf1, 0x67, 0x68, - 0x4c, 0xeb, 0xa1, 0x21, 0xdf, 0x88, 0xa2, 0x52, - 0x60, 0x6a, 0x8a, 0x4e, 0x4f, 0xd4, 0xfd, 0x13, - 0xec, 0x72, 0xaf, 0x44, 0xb7, 0xc8, 0xd0, 0x8f, - 0x30, 0xd8, 0x53, 0xde, 0xed, 0x8a, 0xb0, 0x4b, - 0xfe, 0xdb, 0x7d, 0xe6, 0xe4, 0xbf, 0x79, 0x20, - 0x53, 0x05, 0x39, 0xee, 0x1f, 0x2f, 0x54, 0x52, - 0x9e, 0x69, 0x97, 0x9b, 0xb0, 0xfe, 0x8c, 0x2d, - 0xbe, 0xd9, 0xc4, 0x6a, 0x8d, 0x34, 0x4c, 0x15, - 0xcd, 0x58, 0xd7, 0x82, 0xee, 0x1a, 0xd4, 0x6f, - 0x71, 0xa9, 0x35, 0xe2, 0x68, 0x14, 0x64, 0xab, - 0x32, 0x58, 0xab, 0x38, 0x7b, 0x95, 0xc0, 0x62, - 0x85, 0xd9, 0x2c, 0x72, 0xb5, 0xf9, 0xeb, 0xeb, - 0x0e, 0x36, 0x4d, 0x69, 0xf5, 0x6b, 0xed, 0x54, - 0x34, 0x12, 0x97, 0x3c, 0x95, 0x76, 0x4d, 0xa5, - 0x4d, 0x4a, 0x5b, 0xfe, 0xb2, 0x58, 0x20, 0x41, - 0x11, 0x2f, 0x1d, 0xa7, 0x5e, 0x41, 0x42, 0x99, - 0x34, 0x7a, 0xb6, 0x55, 0x89, 0x5e, 0x99, 0xdb, - 0x31, 0x31, 0x36, 0x6c, 0x77, 0x43, 0x7c, 0xa0, - 0xcb, 0xac, 0xb2, 0xee, 0x8b, 0x60, 0x85, 0x3e, - 0x96, 0x60, 0xb6, 0xc6, 0x2e, 0xda, 0x71, 0x06, - 0x7d, 0x64, 0xa6, 0x44, 0x26, 0xad, 0x83, 0x58, - 0xc8, 0x38, 0xc4, 0xca, 0xa5, 0x1b, 0x67, 0x69, - 0x1c, 0xb1, 0x83, 0x2b, 0x8a, 0x92, 0xca, 0xe1, - 0x1b, 0xec, 0x22, 0x99, 0x5a, 0x29, 0x27, 0x11, - 0x31, 0x5d, 0x3c, 0xd3, 0xb9, 0xf8, 0x51, 0x03, - 0xfb, 0xcc, 0xcd, 0x3a, 0xce, 0x38, 0x37, 0x61, - 0xfb, 0xa9, 0x71, 0x6e, 0x43, 0x2a, 0x8d, 0x84, - 0x7d, 0x1f, 0x1b, 0xe3, 0x44, 0xd3, 0x7e, 0x37, - 0x25, 0xae, 0x15, 0xf3, 0x10, 0x8a, 0xf1, 0x19, - 0xb6, 0x7f, 0x96, 0x42, 0xe0, 0x4a, 0x16, 0x4a, - 0x6c, 0xcd, 0xf0, 0xdc, 0xd3, 0x59, 0xa8, 0xf1, - 0x4b, 0x94, 0xc7, 0x6b, 0x49, 0x59, 0x24, 0x82, - 0x7d, 0x01, 0x75, 0x00, 0x51, 0x04, 0x51, 0xdc, - 0x97, 0x28, 0xb6, 0x94, 0x10, 0xc5, 0x45, 0x46, - 0x43, 0x04, 0x2e, 0x2d, 0x4b, 0x9f, 0x31, 0xf7, - 0x51, 0xd8, 0x00, 0x42, 0x96, 0x4a, 0x14, 0xcb, - 0xbb, 0xe0, 0x29, 0x42, 0x2e, 0xf9, 0x53, 0xd0, - 0xea, 0x29, 0x20, 0xa2, 0x20, 0xa2, 0x5b, 0x22, - 0xda, 0x2a, 0x4b, 0x44, 0xbb, 0x6a, 0x88, 0x28, - 0x13, 0x01, 0x28, 0xdd, 0x1b, 0x33, 0xb1, 0x84, - 0xba, 0x8f, 0xbd, 0xc7, 0x01, 0x76, 0xcb, 0x95, - 0x4f, 0x86, 0xf8, 0x23, 0x90, 0x78, 0x04, 0xa2, - 0x7c, 0xef, 0x0c, 0x1e, 0x01, 0xc2, 0x09, 0xc2, - 0xb9, 0x3f, 0xe1, 0x54, 0xc3, 0x94, 0x95, 0x52, - 0xb9, 0x88, 0x0f, 0xeb, 0x41, 0x76, 0xbd, 0x5c, - 0x0f, 0x53, 0xc8, 0xe4, 0x22, 0x2a, 0x8d, 0x6e, - 0xe4, 0x03, 0x40, 0x30, 0x41, 0x30, 0xf7, 0x27, - 0x98, 0x6a, 0x18, 0xb6, 0x1e, 0xe1, 0x53, 0x23, - 0x38, 0xca, 0x7b, 0x2c, 0xdb, 0xc9, 0xec, 0x13, - 0x1f, 0x61, 0x0f, 0xdd, 0x05, 0xa4, 0x51, 0x10, - 0x04, 0x2c, 0x32, 0xfb, 0x22, 0x79, 0xba, 0x40, - 0x0f, 0x38, 0x0e, 0xc1, 0xfc, 0x91, 0x06, 0x29, - 0x41, 0x08, 0x40, 0xd6, 0xc1, 0x89, 0x3d, 0x05, - 0x0b, 0x39, 0x08, 0xf2, 0x0e, 0xa7, 0x96, 0xe5, - 0x19, 0xe2, 0xc8, 0xc2, 0x1e, 0x42, 0xbc, 0xdc, - 0x2a, 0x5e, 0xd1, 0x07, 0x99, 0x04, 0x99, 0xdc, - 0xdf, 0xfe, 0xdb, 0xae, 0x97, 0x4c, 0xf6, 0x89, - 0xc3, 0x37, 0x2c, 0xb1, 0x3e, 0x52, 0x22, 0xbd, - 0xc5, 0xa5, 0xd6, 0xa8, 0x86, 0x70, 0x14, 0x66, - 0xe5, 0xcc, 0xc9, 0xc9, 0xb2, 0xf2, 0xe1, 0xf5, - 0x67, 0xe5, 0x4e, 0x11, 0x42, 0x21, 0x46, 0xb9, - 0x66, 0xe2, 0xf0, 0x31, 0xd8, 0x48, 0x64, 0x79, - 0x9b, 0x81, 0xc5, 0x5d, 0xc3, 0x90, 0x11, 0x75, - 0x87, 0x6f, 0x1f, 0xfa, 0xd4, 0xd1, 0x07, 0x64, - 0x8c, 0x9f, 0x28, 0x9b, 0xba, 0xaa, 0xc8, 0x47, - 0xfc, 0xd6, 0xf9, 0x89, 0xd9, 0x4d, 0xf9, 0x14, - 0xf4, 0x85, 0x0f, 0x1e, 0x7d, 0x73, 0xd0, 0xcd, - 0x62, 0xf0, 0x3f, 0x15, 0x79, 0x22, 0xb1, 0x2c, - 0xea, 0x78, 0xf4, 0x7b, 0x32, 0x86, 0x2c, 0x35, - 0x8f, 0xe9, 0xb2, 0x14, 0x40, 0x41, 0xb6, 0x5f, - 0x6c, 0x78, 0x9a, 0xfa, 0x52, 0x7d, 0x5e, 0x33, - 0xa3, 0x91, 0x4d, 0x06, 0x6c, 0x09, 0xd6, 0x36, - 0xc4, 0xd5, 0x29, 0x88, 0xa5, 0x3c, 0x1c, 0xd5, - 0xb8, 0x0a, 0x8b, 0xed, 0x64, 0xa2, 0x94, 0x6a, - 0xa2, 0x63, 0x26, 0x9b, 0xcb, 0xe6, 0x57, 0x22, - 0xea, 0xa5, 0x10, 0xf7, 0x81, 0x3c, 0x87, 0xf0, - 0x28, 0x37, 0xfc, 0x44, 0xd3, 0xb6, 0x11, 0xbb, - 0x91, 0x74, 0x39, 0xab, 0xb9, 0x74, 0x30, 0xf5, - 0x89, 0x97, 0xe6, 0xe7, 0xeb, 0x37, 0x2c, 0xf8, - 0x55, 0x3c, 0x5b, 0xb0, 0xfc, 0xf2, 0x8b, 0x54, - 0xcf, 0x3d, 0xcb, 0xf2, 0xe0, 0x54, 0x5c, 0x5b, - 0x5f, 0xdf, 0xf0, 0x5c, 0x0d, 0x3b, 0xb4, 0x0d, - 0x76, 0xe8, 0xc9, 0xdb, 0xa1, 0x3d, 0xe5, 0xed, - 0xd0, 0xf8, 0xc3, 0x30, 0x39, 0x9e, 0xba, 0x7b, - 0x99, 0x77, 0x10, 0x49, 0x26, 0x90, 0x78, 0x73, - 0x78, 0x38, 0x2b, 0x38, 0x4a, 0x19, 0x9e, 0xa4, - 0x49, 0x8d, 0xca, 0x5d, 0x37, 0xbe, 0xc5, 0x9f, - 0x9d, 0xba, 0xa1, 0x71, 0xe3, 0x6d, 0xe9, 0xbf, - 0x58, 0xfe, 0x3f, 0x06, 0x7f, 0x19, 0xf9, 0xff, - 0xf8, 0x5d, 0x86, 0x9b, 0x51, 0x08, 0xa9, 0x10, - 0x1f, 0x9f, 0xc9, 0xcf, 0xf3, 0x3c, 0x4e, 0x04, - 0x9e, 0xb9, 0x36, 0x78, 0x9c, 0x3a, 0x69, 0x87, - 0x9d, 0x7b, 0x65, 0x93, 0x6e, 0x4c, 0x56, 0x17, - 0xc5, 0x54, 0x44, 0x81, 0x4c, 0x47, 0x82, 0x18, - 0xc7, 0x0e, 0xb4, 0xd0, 0xe1, 0x84, 0x45, 0x85, - 0x22, 0x38, 0x9e, 0x00, 0xc7, 0x13, 0xb2, 0xec, - 0x02, 0xe9, 0x8f, 0x27, 0xb4, 0xe1, 0x78, 0xc2, - 0x31, 0x8e, 0x27, 0xe4, 0xb1, 0xb8, 0x2a, 0x72, - 0xc4, 0x21, 0xa5, 0x4e, 0x2a, 0xd5, 0x92, 0xde, - 0xd7, 0x21, 0x07, 0x97, 0xcd, 0x56, 0x27, 0x1c, - 0xba, 0x65, 0x1d, 0x95, 0xe8, 0x2a, 0x72, 0x54, - 0xc2, 0x90, 0xb5, 0x4d, 0xf5, 0x81, 0x45, 0xed, - 0xc7, 0x72, 0xe1, 0x9f, 0x41, 0xd5, 0x54, 0x74, - 0x23, 0x29, 0x43, 0xf2, 0x0c, 0x92, 0x67, 0x80, - 0xca, 0x4e, 0x16, 0xc5, 0xa5, 0xd2, 0xe5, 0x12, - 0x65, 0x95, 0x7b, 0x40, 0x62, 0x6a, 0x0a, 0x09, - 0x5a, 0x16, 0x9f, 0x46, 0x37, 0xb2, 0x86, 0x27, - 0x88, 0x24, 0x88, 0x24, 0xe0, 0xc9, 0x22, 0x63, - 0x08, 0xfa, 0x93, 0x4f, 0x16, 0x7b, 0xa3, 0x37, - 0xc6, 0x0e, 0x51, 0x3f, 0x6f, 0x17, 0xee, 0xd7, - 0x7d, 0x31, 0xda, 0x9f, 0x10, 0x64, 0xea, 0x00, - 0x63, 0x7d, 0x8c, 0x4c, 0x9d, 0xaa, 0x72, 0xb7, - 0x91, 0x98, 0xd3, 0x2a, 0x92, 0x98, 0xbb, 0x80, - 0xc4, 0x5c, 0x6d, 0x6c, 0xdc, 0xa3, 0x48, 0xb5, - 0x32, 0x39, 0x81, 0xae, 0x82, 0x39, 0x81, 0xa5, - 0x35, 0x0f, 0x59, 0x81, 0xe2, 0x59, 0x01, 0xad, - 0x62, 0x59, 0x81, 0x21, 0x13, 0x15, 0x30, 0x21, - 0x13, 0x00, 0x99, 0x80, 0x32, 0x33, 0x01, 0x1d, - 0xc8, 0x04, 0x40, 0x26, 0x20, 0x53, 0x26, 0x20, - 0x41, 0x0f, 0xd5, 0x2f, 0xfa, 0xdf, 0x3b, 0xd9, - 0x42, 0x49, 0x5b, 0xf1, 0x8d, 0x14, 0xeb, 0xaa, - 0x40, 0x4c, 0xe3, 0x1d, 0x1f, 0xe5, 0x4f, 0x10, - 0x36, 0x50, 0x31, 0x62, 0x27, 0x96, 0x36, 0xa2, - 0x6a, 0x6f, 0x85, 0xf8, 0xba, 0xfc, 0x80, 0x76, - 0x51, 0x8a, 0xc1, 0xe4, 0xf4, 0xb9, 0x98, 0x20, - 0xad, 0x5d, 0x84, 0x90, 0xe3, 0x92, 0x27, 0x4a, - 0x66, 0xba, 0xf4, 0xeb, 0xcf, 0xb2, 0xdf, 0x2f, - 0x0f, 0xd0, 0x2f, 0x88, 0x70, 0xbb, 0xc4, 0x9d, - 0x67, 0x56, 0x03, 0x90, 0xab, 0x3a, 0x45, 0x3f, - 0xbe, 0xa7, 0xa0, 0x1f, 0x2f, 0x34, 0x19, 0xf8, - 0xee, 0x05, 0x7c, 0xf7, 0x76, 0xc5, 0x7c, 0xf7, - 0xb0, 0x40, 0x28, 0x9e, 0xfa, 0x4c, 0x94, 0x9f, - 0x24, 0xe0, 0xc7, 0x83, 0x1f, 0x5f, 0xb2, 0x1f, - 0x0f, 0x8e, 0x3c, 0x38, 0xf2, 0xd9, 0x1c, 0x79, - 0x3c, 0x35, 0x13, 0xb5, 0x51, 0x6d, 0xbc, 0xf9, - 0xfc, 0xbe, 0x73, 0x45, 0x7c, 0xf1, 0xbe, 0x43, - 0xed, 0x75, 0xcf, 0xc5, 0xe3, 0xd7, 0xab, 0xcd, - 0x42, 0xf7, 0xe9, 0x84, 0x28, 0xe2, 0xc1, 0x50, - 0x3b, 0x7c, 0x2b, 0x99, 0xc2, 0x6f, 0x5c, 0xfd, - 0xdf, 0xff, 0xfe, 0x4f, 0x11, 0x72, 0xd8, 0xfc, - 0x63, 0xea, 0xf9, 0x52, 0x1d, 0x5e, 0xad, 0xfe, - 0xd6, 0xc0, 0x67, 0xa8, 0x5a, 0x46, 0x3f, 0xa6, - 0x00, 0xf0, 0x92, 0xc5, 0xb9, 0x9f, 0x3e, 0x61, - 0xc2, 0x68, 0xb5, 0x08, 0x7e, 0x22, 0xa5, 0x42, - 0xdd, 0xde, 0x73, 0xfa, 0x61, 0x69, 0xee, 0xd9, - 0x98, 0xd8, 0x48, 0x3e, 0x07, 0xc9, 0xe7, 0x78, - 0x88, 0xfa, 0x00, 0x7a, 0x4b, 0x1d, 0xf2, 0x02, - 0x1c, 0xaa, 0xea, 0xc8, 0x9b, 0x97, 0xce, 0x75, - 0x5b, 0x99, 0x53, 0xb3, 0xdc, 0xa2, 0xe7, 0x06, - 0xbd, 0xd6, 0xda, 0x4f, 0x54, 0xf9, 0x9a, 0x2b, - 0x32, 0x24, 0x15, 0xcd, 0x1d, 0xb1, 0xf0, 0x1c, - 0x02, 0xcc, 0x27, 0xbb, 0x8b, 0x05, 0xd5, 0x24, - 0x2c, 0xe6, 0xf9, 0xe5, 0x6f, 0x62, 0x72, 0xfb, - 0x0a, 0x76, 0x32, 0xd1, 0x0d, 0xcd, 0x43, 0xf2, - 0x61, 0xb0, 0x81, 0xc1, 0x06, 0xa6, 0x18, 0x74, - 0x54, 0x99, 0xe0, 0x74, 0xbb, 0xa5, 0x60, 0x74, - 0x7a, 0xb9, 0xd9, 0x41, 0x88, 0xba, 0x40, 0x88, - 0xba, 0x53, 0xb1, 0x10, 0x35, 0x7f, 0x99, 0x11, - 0xff, 0x43, 0x27, 0xcf, 0x14, 0x60, 0x66, 0x10, - 0x9e, 0x2e, 0x39, 0x3c, 0xdd, 0xee, 0x42, 0x78, - 0x1a, 0xc2, 0xd3, 0x59, 0xc2, 0xd3, 0x1a, 0xb4, - 0xd1, 0xab, 0x10, 0x3a, 0xac, 0x7d, 0xae, 0x3e, - 0x34, 0xec, 0x77, 0xe1, 0x5e, 0xf1, 0x19, 0xf0, - 0xd1, 0xe2, 0xdc, 0x2d, 0xa2, 0x1e, 0x92, 0x8d, - 0xa7, 0x4d, 0xf0, 0xe8, 0xd5, 0xf4, 0xe8, 0x23, - 0x6a, 0x42, 0x72, 0x27, 0x5e, 0x30, 0xc1, 0xea, - 0xf0, 0x75, 0x82, 0x45, 0x54, 0x3b, 0xee, 0x0f, - 0x0f, 0x9d, 0x59, 0xd4, 0xf3, 0x3d, 0xee, 0xc5, - 0x92, 0xaa, 0x9c, 0x3b, 0x6b, 0xc1, 0xb9, 0x33, - 0xc8, 0x3d, 0x1d, 0x34, 0x6a, 0xc7, 0x87, 0x30, - 0x71, 0x7c, 0x21, 0xed, 0x39, 0xe5, 0x7b, 0x67, - 0xf7, 0xc9, 0xe0, 0x09, 0xa2, 0xd9, 0x9d, 0x78, - 0x02, 0x84, 0xe9, 0x20, 0x4c, 0x77, 0xaa, 0x79, - 0x26, 0xa8, 0x4a, 0x19, 0x65, 0x53, 0x6b, 0x2a, - 0x42, 0x57, 0xbf, 0x04, 0x61, 0x24, 0x74, 0xcf, - 0x55, 0x1e, 0xc4, 0x07, 0x0b, 0xc4, 0x07, 0xbb, - 0xc7, 0x8d, 0x0f, 0x6e, 0x1d, 0x0f, 0x72, 0x89, - 0x6c, 0xaf, 0x23, 0x1a, 0x44, 0x52, 0xa3, 0x16, - 0x00, 0xd6, 0x42, 0x71, 0xb2, 0xa7, 0x22, 0x37, - 0x07, 0xc9, 0xe6, 0xcc, 0x81, 0xbd, 0x79, 0xbe, - 0xdb, 0x92, 0xa5, 0xd2, 0x9b, 0x60, 0xcb, 0x12, - 0x32, 0x28, 0x2e, 0xe8, 0xe2, 0x0f, 0x29, 0x95, - 0xa2, 0x9d, 0xe0, 0x4f, 0x2b, 0x21, 0x45, 0x7d, - 0x36, 0x21, 0x88, 0x39, 0xa2, 0x01, 0x99, 0x87, - 0x5c, 0xf2, 0xe7, 0x94, 0xba, 0x04, 0xf9, 0x63, - 0xcc, 0x1d, 0x62, 0x99, 0x74, 0xa4, 0xe2, 0x53, - 0xc9, 0x05, 0xc4, 0x7c, 0x25, 0xef, 0x5b, 0xd2, - 0x3b, 0x5b, 0x3e, 0x26, 0xeb, 0xdb, 0x67, 0x15, - 0xf3, 0x97, 0xf7, 0x0b, 0xd0, 0x17, 0x1d, 0xce, - 0x1b, 0x57, 0x06, 0xb1, 0xfd, 0xdd, 0x3d, 0x11, - 0x73, 0xdb, 0x1c, 0x5b, 0x8b, 0x95, 0xce, 0xa9, - 0xaf, 0xa2, 0x6a, 0xe9, 0x95, 0xad, 0x5a, 0xa2, - 0x07, 0x19, 0xf9, 0xe3, 0x8d, 0x1d, 0x94, 0xf3, - 0xea, 0x96, 0x22, 0x49, 0x54, 0x45, 0xf6, 0x40, - 0x0f, 0xb4, 0x91, 0x08, 0x86, 0xb9, 0x38, 0x6a, - 0xf7, 0xcd, 0xad, 0x82, 0x8a, 0xa8, 0x9f, 0xf4, - 0x22, 0xf9, 0x73, 0xf0, 0xe2, 0xf1, 0xc4, 0xe2, - 0x18, 0x26, 0x9e, 0x59, 0xb6, 0x96, 0x1a, 0x0f, - 0xf4, 0x21, 0x15, 0x05, 0xe3, 0x76, 0xbc, 0x77, - 0xcc, 0x42, 0x27, 0xac, 0xdb, 0xee, 0xc5, 0x7a, - 0x59, 0x36, 0x94, 0xfa, 0x16, 0xd1, 0xb9, 0x22, - 0xd5, 0x0d, 0x36, 0x99, 0x48, 0x85, 0x5a, 0xcd, - 0x15, 0xdb, 0x08, 0xf7, 0x77, 0x73, 0xdc, 0x19, - 0x86, 0xf9, 0xf3, 0xdc, 0x2a, 0xc3, 0xfb, 0x79, - 0x6e, 0x5c, 0x84, 0xf5, 0x33, 0xdd, 0x9b, 0xbe, - 0xfa, 0x69, 0x19, 0xc1, 0xe8, 0x62, 0xc7, 0x66, - 0x98, 0x6b, 0x2e, 0x6a, 0x7d, 0x55, 0xdf, 0xde, - 0x20, 0x4f, 0x7c, 0x07, 0x12, 0x22, 0x7e, 0xf7, - 0x8b, 0xfe, 0xe5, 0xf3, 0x87, 0x4f, 0x0f, 0xf7, - 0x5f, 0xf5, 0x5f, 0x3f, 0x3f, 0x7c, 0xf8, 0xfc, - 0x49, 0xff, 0xf5, 0xba, 0xff, 0x0b, 0xfa, 0x17, - 0x8a, 0xf8, 0xe6, 0x3d, 0xbf, 0x5a, 0xff, 0xfa, - 0xe6, 0xdb, 0xc3, 0x03, 0xff, 0xf8, 0xcb, 0xd7, - 0xfb, 0x7e, 0x3f, 0xe2, 0xf3, 0xaf, 0xf7, 0x1f, - 0xef, 0xaf, 0xfb, 0xf7, 0xf2, 0x9b, 0x9a, 0xa4, - 0xfe, 0xea, 0xe7, 0xe6, 0x54, 0x6d, 0x21, 0xab, - 0x93, 0x94, 0xd3, 0x3d, 0x62, 0xf1, 0xef, 0xf5, - 0xc1, 0x5c, 0xca, 0x66, 0x9d, 0x53, 0x74, 0x55, - 0x5c, 0xe4, 0x62, 0x1b, 0x53, 0x49, 0x9b, 0x54, - 0x29, 0x1b, 0x56, 0x59, 0x9b, 0x57, 0x39, 0x1b, - 0x59, 0x96, 0x54, 0x6d, 0xb7, 0xf6, 0xa9, 0xda, - 0x8e, 0x2a, 0xc9, 0xaa, 0xaa, 0x8a, 0x68, 0xc6, - 0xb4, 0x32, 0x57, 0x94, 0xe8, 0x96, 0x1b, 0x31, - 0xd8, 0xe0, 0xfe, 0xa9, 0x07, 0x99, 0x64, 0x25, - 0xb3, 0x4c, 0xf7, 0xb2, 0x64, 0x85, 0x94, 0x42, - 0x59, 0xbd, 0x62, 0xb7, 0xed, 0x5a, 0xb7, 0x84, - 0x4f, 0x75, 0xa5, 0x11, 0x12, 0xa9, 0xa7, 0x98, - 0x3e, 0xa9, 0x1f, 0xa4, 0xb0, 0x16, 0x7e, 0xc5, - 0xee, 0x14, 0x4f, 0x5f, 0xfa, 0x00, 0x68, 0x30, - 0x47, 0x62, 0x6b, 0x83, 0x24, 0x8f, 0x42, 0x20, - 0xf0, 0xa9, 0x6b, 0x41, 0xa4, 0xa5, 0xbe, 0x91, - 0x96, 0x36, 0x68, 0x44, 0x65, 0x22, 0x2d, 0x5c, - 0x14, 0xf5, 0x31, 0xb6, 0x4d, 0x4b, 0x3e, 0x16, - 0xe2, 0x2c, 0x10, 0x67, 0x81, 0x38, 0xcb, 0x51, - 0xe3, 0x2c, 0xdb, 0x1e, 0x1e, 0x19, 0xe8, 0x03, - 0x3e, 0x39, 0x1e, 0x71, 0xc1, 0xc5, 0x03, 0x17, - 0x4f, 0xc5, 0xa6, 0x47, 0xda, 0x6b, 0x88, 0x25, - 0x56, 0x2a, 0x96, 0x48, 0x06, 0xe8, 0x26, 0x50, - 0x39, 0xe8, 0xef, 0x10, 0x49, 0x84, 0x30, 0xcb, - 0x01, 0x50, 0xaa, 0x97, 0xe0, 0x54, 0x1c, 0x25, - 0xcc, 0xf2, 0xed, 0xeb, 0x47, 0xf4, 0x3e, 0x74, - 0x00, 0x20, 0xc8, 0xa2, 0x50, 0x31, 0x58, 0x89, - 0x89, 0xaa, 0x43, 0x98, 0xe5, 0x48, 0x61, 0x8c, - 0xfa, 0x75, 0x66, 0x3a, 0x52, 0x4b, 0xee, 0x04, - 0x3e, 0xaa, 0x45, 0x68, 0x00, 0x5c, 0x6e, 0x70, - 0xb9, 0x33, 0xd9, 0x22, 0x3a, 0xb5, 0xa9, 0x4f, - 0xb1, 0x95, 0x8a, 0xf5, 0x6b, 0xe3, 0x9a, 0xc4, - 0xdb, 0x02, 0x1f, 0x82, 0xe1, 0xa2, 0x07, 0x31, - 0x5c, 0x30, 0xf7, 0x4f, 0x03, 0x38, 0x50, 0x25, - 0xde, 0x86, 0x66, 0xf1, 0x35, 0x08, 0xd2, 0x84, - 0x20, 0xfb, 0x09, 0x7e, 0xe6, 0x5b, 0xa9, 0x3d, - 0xf2, 0xc7, 0xea, 0x2b, 0x46, 0xa9, 0x10, 0xd1, - 0xaf, 0xf8, 0x19, 0x7d, 0x94, 0x23, 0x06, 0xdd, - 0x58, 0x4a, 0xbe, 0xb9, 0x6a, 0x9c, 0x1e, 0x59, - 0x17, 0xbd, 0xa2, 0xdc, 0x5e, 0x8f, 0xca, 0xe8, - 0x27, 0x50, 0x1a, 0xbd, 0x53, 0xff, 0x12, 0x34, - 0xe6, 0x9c, 0x0f, 0x8b, 0x1a, 0xd8, 0xb2, 0xe6, - 0xba, 0x47, 0xfc, 0x1a, 0x9b, 0x04, 0xc9, 0x6d, - 0xcf, 0xdb, 0xd5, 0xa8, 0x3e, 0xd3, 0x86, 0xe2, - 0x33, 0xb5, 0x91, 0xee, 0x9a, 0x17, 0x54, 0x7f, - 0x29, 0xda, 0xea, 0x9b, 0x6a, 0x77, 0xab, 0x01, - 0x37, 0xf9, 0x80, 0xc1, 0x97, 0x3d, 0x25, 0x6e, - 0x0f, 0x6c, 0xb5, 0x01, 0x19, 0xe3, 0x27, 0xca, - 0xa6, 0xee, 0xa9, 0x38, 0x26, 0x37, 0x8b, 0x01, - 0x03, 0x9f, 0x97, 0x92, 0xa2, 0xa9, 0x83, 0xcd, - 0xa6, 0x28, 0xab, 0xaf, 0x9b, 0x6b, 0x5a, 0x45, - 0xec, 0x35, 0xed, 0x12, 0x0c, 0xb6, 0xda, 0x18, - 0x6c, 0x6d, 0x40, 0x5f, 0x14, 0x40, 0x5f, 0x9c, - 0x2b, 0x58, 0x22, 0x4c, 0xee, 0x91, 0x80, 0x68, - 0x28, 0x80, 0x68, 0x68, 0x55, 0x0c, 0xd1, 0x10, - 0x5f, 0xdb, 0x05, 0x30, 0x0d, 0xc1, 0x65, 0x0f, - 0x30, 0x0d, 0xa9, 0x30, 0x0d, 0xc9, 0x9c, 0x04, - 0xa8, 0x06, 0x40, 0x35, 0x94, 0x87, 0x6a, 0x50, - 0xa2, 0x75, 0x6c, 0x94, 0x2b, 0x12, 0x0a, 0x51, - 0x95, 0x0a, 0x97, 0x97, 0x19, 0x35, 0xee, 0x54, - 0xc3, 0x0b, 0xe9, 0x80, 0x13, 0x02, 0x4e, 0xc8, - 0x81, 0x30, 0x21, 0x5c, 0x86, 0xb8, 0xea, 0x4d, - 0xb9, 0x3b, 0x02, 0x38, 0xe4, 0x84, 0x13, 0x0e, - 0x31, 0xd5, 0xee, 0xdd, 0xa9, 0x5d, 0x9c, 0x89, - 0xe2, 0x7d, 0xbb, 0xaf, 0x53, 0x1b, 0x61, 0x14, - 0x3c, 0x00, 0x85, 0x0f, 0x40, 0xd4, 0xf6, 0x7c, - 0x82, 0x4d, 0xc4, 0x86, 0xc8, 0x1f, 0x13, 0xe4, - 0x8d, 0xb9, 0x3a, 0xad, 0x5a, 0x15, 0xfc, 0xc2, - 0xf1, 0x31, 0x28, 0x83, 0x0f, 0xd8, 0xbf, 0xf2, - 0xf2, 0x25, 0x95, 0xd4, 0xf3, 0x7b, 0x4c, 0x97, - 0xdc, 0x06, 0x1a, 0xe3, 0x36, 0x18, 0x2f, 0x64, - 0x4b, 0x4e, 0x23, 0x2b, 0x58, 0x41, 0xff, 0x64, - 0xdf, 0x6d, 0xc5, 0x42, 0x0e, 0x97, 0x6d, 0x11, - 0xa0, 0x04, 0x9c, 0xa2, 0x59, 0xc1, 0x68, 0xd3, - 0x6b, 0xc1, 0xed, 0x16, 0x13, 0x41, 0x14, 0x69, - 0x05, 0x95, 0x6a, 0x7b, 0x7d, 0xf3, 0x08, 0x12, - 0x0d, 0xc1, 0x39, 0xf5, 0x6a, 0xda, 0x58, 0xd0, - 0x69, 0x48, 0x25, 0xa1, 0xec, 0x9c, 0x4e, 0xa7, - 0x21, 0xe8, 0x6f, 0x54, 0x28, 0x77, 0x79, 0xa1, - 0x60, 0xee, 0x32, 0xdc, 0xc7, 0x21, 0x7b, 0x59, - 0x20, 0x7b, 0xa9, 0x1d, 0x37, 0x7b, 0xd9, 0x37, - 0x5c, 0x66, 0x59, 0xc4, 0xfc, 0x9d, 0xab, 0x6e, - 0x36, 0x0b, 0x0f, 0x16, 0x84, 0x9f, 0xcd, 0xe4, - 0x67, 0xda, 0x81, 0x13, 0x99, 0x79, 0x6e, 0x5f, - 0x36, 0x37, 0xca, 0x95, 0x05, 0x2d, 0xd4, 0xdd, - 0xc8, 0x1b, 0x63, 0x3e, 0x49, 0xba, 0x50, 0x12, - 0x8d, 0x2b, 0x6a, 0x97, 0x9d, 0x42, 0xfd, 0x8d, - 0x92, 0x99, 0xc3, 0xdc, 0x30, 0xda, 0xfe, 0x14, - 0x5e, 0x69, 0x75, 0x53, 0x26, 0x1b, 0xb3, 0x64, - 0x33, 0x9b, 0xec, 0x2b, 0x83, 0xba, 0xe5, 0x5e, - 0x85, 0x35, 0xa9, 0xb8, 0x69, 0x32, 0x64, 0x75, - 0x4e, 0xa4, 0x66, 0x62, 0xd2, 0xec, 0x3a, 0xfd, - 0xef, 0xe8, 0x1a, 0x3d, 0x71, 0x3b, 0xd0, 0x5c, - 0x06, 0x2c, 0x65, 0xab, 0x2b, 0xfe, 0xf6, 0x88, - 0x53, 0x10, 0xf1, 0xcc, 0x70, 0x22, 0xd1, 0x64, - 0xea, 0xf9, 0x68, 0x40, 0x90, 0x6c, 0x30, 0x45, - 0x4c, 0x34, 0xe6, 0xff, 0xbe, 0x42, 0x1f, 0x7c, - 0xd1, 0x10, 0xcb, 0x61, 0x9e, 0x9c, 0x32, 0xe4, - 0x33, 0xc4, 0xf5, 0xba, 0x8c, 0x74, 0x8a, 0x27, - 0x8b, 0xa8, 0x27, 0x46, 0x9e, 0x43, 0x0c, 0x3a, - 0xa4, 0xc6, 0x92, 0x94, 0x37, 0x35, 0xc6, 0x08, - 0x7b, 0xe8, 0xc7, 0x21, 0x75, 0xc9, 0x90, 0x3d, - 0xff, 0x88, 0xc4, 0x83, 0x7f, 0x1c, 0x31, 0x36, - 0xb2, 0x48, 0xd3, 0x18, 0xbb, 0x6c, 0x42, 0x7e, - 0x44, 0xcc, 0x5d, 0x27, 0x27, 0x7b, 0x1d, 0x71, - 0x1a, 0xe1, 0x6b, 0xf2, 0x9b, 0x9f, 0x9b, 0xb3, - 0xd9, 0xac, 0x19, 0xd2, 0x0c, 0x49, 0x3c, 0x9b, - 0xa3, 0xa6, 0x78, 0xef, 0x1f, 0x5f, 0xa1, 0x07, - 0x7e, 0xd3, 0x80, 0xf0, 0x77, 0x5e, 0x0c, 0x6c, - 0x82, 0xe7, 0xe2, 0xfd, 0x4d, 0x3a, 0x1c, 0xf2, - 0x57, 0xb7, 0x7d, 0x64, 0x12, 0xfe, 0x4b, 0x91, - 0xda, 0x17, 0xdd, 0x49, 0x65, 0x70, 0x76, 0xee, - 0xf9, 0x64, 0xf2, 0x2a, 0xef, 0x2c, 0xcf, 0x5c, - 0xec, 0x14, 0x5b, 0xa7, 0xcc, 0x16, 0x79, 0x5c, - 0x3f, 0xae, 0x94, 0x04, 0x8e, 0x67, 0x65, 0x9d, - 0x44, 0x47, 0xb0, 0xa2, 0x80, 0x22, 0xd1, 0x74, - 0x5d, 0x8f, 0x6a, 0x0f, 0x06, 0x90, 0xa2, 0x65, - 0xb5, 0x57, 0x0d, 0x30, 0x45, 0xe9, 0x30, 0x45, - 0x3b, 0x98, 0x09, 0x50, 0x45, 0x80, 0x2a, 0xaa, - 0x7f, 0xad, 0x94, 0xd8, 0xe8, 0xa3, 0xcd, 0x4d, - 0x8d, 0x49, 0x6a, 0x21, 0xc8, 0x66, 0x43, 0xf5, - 0xc7, 0x6c, 0x86, 0xc2, 0x47, 0x60, 0xd1, 0x37, - 0x94, 0xdb, 0x18, 0xd8, 0x62, 0x23, 0x34, 0x13, - 0x41, 0x6f, 0xf1, 0x4c, 0x61, 0x63, 0xf0, 0x3b, - 0x20, 0x26, 0x09, 0x31, 0x49, 0xa8, 0xf0, 0x58, - 0xcd, 0x38, 0x9d, 0xa6, 0x4e, 0x9c, 0xee, 0x56, - 0x68, 0x39, 0x74, 0x6d, 0x08, 0x55, 0x94, 0x8a, - 0x72, 0x3a, 0x8c, 0xdc, 0x16, 0x24, 0x6f, 0x46, - 0xe4, 0x0e, 0x2a, 0xfc, 0xc7, 0x29, 0xbf, 0x1c, - 0x30, 0xcb, 0x4c, 0x42, 0x03, 0xa6, 0xc1, 0xe2, - 0x41, 0xf3, 0xf2, 0xa4, 0x81, 0x16, 0xef, 0x8a, - 0xcb, 0x1d, 0x75, 0x2a, 0xd8, 0x22, 0x31, 0xfe, - 0x98, 0xbd, 0x23, 0x6e, 0xe1, 0x4e, 0xc6, 0xb5, - 0xe9, 0x90, 0xbb, 0xeb, 0xd0, 0xab, 0x08, 0x34, - 0x84, 0xe1, 0xf1, 0x7d, 0x76, 0x37, 0x4e, 0xb5, - 0x8e, 0xd5, 0x6e, 0x8a, 0x8c, 0x1d, 0x87, 0x60, - 0x3e, 0x8d, 0x06, 0x81, 0x6e, 0xc8, 0x7b, 0xe8, - 0x86, 0xdc, 0x3b, 0x68, 0x37, 0xe4, 0x9a, 0xb4, - 0x52, 0x1e, 0x07, 0x3b, 0x16, 0x84, 0x53, 0xe2, - 0xc2, 0x29, 0xe7, 0x10, 0x4d, 0x49, 0xa5, 0xbc, - 0x12, 0x19, 0x09, 0x42, 0x29, 0x10, 0x4a, 0x81, - 0x03, 0x5a, 0xc9, 0xe9, 0xb9, 0x40, 0x80, 0x74, - 0xfe, 0x48, 0x83, 0xab, 0x1d, 0x3c, 0x3a, 0x81, - 0x3a, 0xb6, 0x5f, 0x96, 0x63, 0x05, 0xe4, 0x63, - 0x75, 0x03, 0x1a, 0x25, 0xd7, 0x69, 0xac, 0x2a, - 0x9f, 0x17, 0x25, 0x15, 0x5d, 0x59, 0xb1, 0x5d, - 0x28, 0x6a, 0x47, 0x47, 0x54, 0x74, 0xac, 0x68, - 0x43, 0xad, 0xdd, 0x8a, 0x71, 0x76, 0xac, 0xf6, - 0xa6, 0xcf, 0xc4, 0xf2, 0x4e, 0xa1, 0x02, 0x39, - 0xfa, 0x22, 0x87, 0xaa, 0xb6, 0xe2, 0x6e, 0x83, - 0xe2, 0xde, 0x56, 0xdc, 0x55, 0x62, 0xf1, 0xfd, - 0x28, 0xed, 0x4e, 0x65, 0x19, 0xb2, 0x03, 0xa9, - 0x91, 0x2a, 0xa4, 0x46, 0x2e, 0x15, 0x84, 0x30, - 0xbf, 0x97, 0xe2, 0x0d, 0x08, 0xe6, 0xfa, 0x22, - 0x98, 0xb7, 0x82, 0x7b, 0x9e, 0xec, 0xc8, 0xae, - 0x4f, 0x98, 0x4d, 0x65, 0xd6, 0x17, 0x82, 0x7c, - 0x31, 0x41, 0xbe, 0xce, 0x25, 0x44, 0xf9, 0xd2, - 0x44, 0xf9, 0xda, 0x10, 0xdf, 0x83, 0xf8, 0x1e, - 0xc4, 0xf7, 0xf2, 0x98, 0x0c, 0xed, 0xd7, 0xea, - 0x7b, 0x85, 0xbf, 0x06, 0x1b, 0x0d, 0x9c, 0x63, - 0x56, 0xd2, 0x29, 0x8c, 0x2c, 0x29, 0x36, 0x66, - 0x02, 0x3f, 0x98, 0x6c, 0x61, 0xd4, 0x8e, 0xc3, - 0x97, 0x55, 0xc5, 0xe4, 0xa8, 0x74, 0x8b, 0x7a, - 0xbe, 0xee, 0xf1, 0xbf, 0xc8, 0x71, 0x2b, 0x8c, - 0x19, 0xfc, 0xd3, 0x45, 0x95, 0x31, 0x51, 0xfc, - 0x4b, 0x6b, 0xa4, 0xac, 0x1c, 0xf6, 0x52, 0xc4, - 0xb8, 0xdd, 0xc0, 0x05, 0xac, 0x97, 0x65, 0x34, - 0xe9, 0xa5, 0x2c, 0x03, 0x7e, 0x2a, 0x01, 0x49, - 0xb5, 0xf0, 0x22, 0xda, 0x50, 0xde, 0xec, 0x64, - 0x83, 0xaa, 0x9d, 0x56, 0x3d, 0x15, 0x0a, 0xc4, - 0x84, 0x8e, 0xc3, 0x2e, 0x1a, 0xb0, 0x8b, 0xf2, - 0x31, 0x6d, 0x65, 0x42, 0x88, 0x6d, 0x15, 0x63, - 0x88, 0x7d, 0x19, 0x70, 0x42, 0xa1, 0xe1, 0x04, - 0xb1, 0x44, 0x85, 0x6a, 0xb9, 0xcf, 0xa8, 0x19, - 0xdb, 0x53, 0x11, 0x42, 0x88, 0xb6, 0x7f, 0x01, - 0x11, 0xc4, 0x34, 0x11, 0xc4, 0x44, 0x3e, 0x82, - 0x30, 0x22, 0x84, 0x11, 0x21, 0x8c, 0x98, 0x0c, - 0x34, 0x91, 0xf2, 0x03, 0x28, 0x41, 0x88, 0x2b, - 0xaa, 0x8b, 0xa5, 0x0a, 0x59, 0x1c, 0xa0, 0x54, - 0x2a, 0x71, 0x37, 0x40, 0xa9, 0xd6, 0xa0, 0x54, - 0x15, 0x55, 0xe2, 0xfb, 0x41, 0x53, 0x75, 0x01, - 0x02, 0x7b, 0x6a, 0x8c, 0xad, 0x3e, 0x44, 0xb0, - 0x07, 0xe1, 0x60, 0x88, 0xef, 0x25, 0x59, 0x31, - 0xaf, 0x15, 0x0c, 0xef, 0xfd, 0x2e, 0xa4, 0x1b, - 0xa2, 0x7a, 0x05, 0xa2, 0x7a, 0xed, 0x8a, 0x45, - 0xf5, 0x56, 0xa7, 0xe6, 0x21, 0xb0, 0x17, 0x13, - 0xd8, 0x03, 0x68, 0x60, 0xba, 0xc0, 0xde, 0x0e, - 0x56, 0x82, 0xd8, 0x5e, 0xad, 0x63, 0x7b, 0xd9, - 0xea, 0x0a, 0xc7, 0x2e, 0x76, 0x29, 0x54, 0x20, - 0xce, 0x58, 0xbe, 0x35, 0x1f, 0x57, 0x26, 0x2e, - 0xac, 0x6d, 0xcb, 0x5f, 0xc8, 0xa5, 0xdf, 0x19, - 0x77, 0x56, 0x2d, 0x6b, 0x5e, 0x6a, 0xa9, 0xb8, - 0xdb, 0x45, 0xf5, 0xdc, 0xf7, 0x6b, 0x4f, 0x80, - 0x76, 0x60, 0xe9, 0x43, 0x3e, 0x85, 0xc2, 0x86, - 0xd8, 0xf0, 0xf9, 0x6b, 0x15, 0x9f, 0xab, 0x62, - 0xf5, 0xe5, 0x38, 0x3d, 0x8f, 0x8f, 0x05, 0x5b, - 0x4b, 0x8b, 0x69, 0x34, 0xb2, 0x08, 0xdf, 0x5c, - 0xc6, 0x5c, 0x59, 0x58, 0xc4, 0x4d, 0xe4, 0x46, - 0x3d, 0xfc, 0xb5, 0x6e, 0x0c, 0x1a, 0xc8, 0x9b, - 0x89, 0x22, 0x3a, 0xa2, 0x8e, 0x12, 0xdb, 0xdd, - 0x86, 0x13, 0xe2, 0xbb, 0xc7, 0x89, 0xef, 0xce, - 0xd3, 0xda, 0x0a, 0x0a, 0x44, 0x77, 0xff, 0x0b, - 0x7d, 0x09, 0xc7, 0x0a, 0xe1, 0xdd, 0x54, 0xcc, - 0xad, 0x29, 0x10, 0x05, 0x7b, 0xae, 0x1a, 0x83, - 0xef, 0x27, 0x06, 0x76, 0x0e, 0x5d, 0x5e, 0xeb, - 0xc0, 0x8d, 0xf3, 0xd3, 0xe0, 0xc6, 0x0b, 0xf5, - 0x23, 0xb2, 0x75, 0x6f, 0xf0, 0xf8, 0x7c, 0x42, - 0x1b, 0xff, 0x7f, 0x9e, 0xc8, 0xc6, 0xdf, 0x82, - 0x86, 0xda, 0x91, 0x0e, 0xf3, 0x13, 0x1f, 0x08, - 0xf7, 0x86, 0xf6, 0xe6, 0x2e, 0xff, 0xb6, 0xa4, - 0x0f, 0xce, 0x32, 0x38, 0xcb, 0x49, 0xce, 0xf2, - 0x8a, 0x13, 0x6b, 0xe3, 0x2a, 0x9f, 0x08, 0x58, - 0x04, 0xba, 0x52, 0x56, 0xa8, 0xda, 0x7d, 0x4b, - 0xc1, 0x84, 0xed, 0xc2, 0x04, 0x81, 0x9c, 0x6d, - 0x81, 0x9c, 0x6d, 0xa7, 0x62, 0x39, 0x5b, 0xbe, - 0xd2, 0x1e, 0xe4, 0x6b, 0x63, 0xf3, 0xb5, 0xaf, - 0x21, 0x5f, 0x9b, 0x2a, 0x5f, 0x9b, 0xc0, 0x46, - 0x90, 0xab, 0x85, 0x5c, 0x2d, 0xe4, 0x6a, 0x2b, - 0x9b, 0xab, 0xdd, 0x8a, 0xab, 0x88, 0x26, 0x16, - 0x0e, 0x3b, 0x01, 0xac, 0xfc, 0xc2, 0x9e, 0x11, - 0x5d, 0x54, 0x1f, 0xb8, 0xfe, 0x82, 0x4a, 0x33, - 0x4a, 0x66, 0x0c, 0xa3, 0x2a, 0xcd, 0x28, 0xc6, - 0xe3, 0xcb, 0x12, 0x33, 0xfc, 0x7f, 0xda, 0x71, - 0xcb, 0xca, 0x2c, 0x4a, 0xca, 0x68, 0xbb, 0xc3, - 0x00, 0x92, 0x6c, 0xe1, 0xda, 0x2e, 0xa2, 0x76, - 0x8d, 0xe4, 0x49, 0xa8, 0xec, 0x72, 0x2a, 0x02, - 0x1d, 0x1d, 0x2c, 0x0d, 0x2c, 0x8c, 0x34, 0x96, - 0x68, 0xb6, 0x6d, 0xe2, 0x5e, 0xd2, 0x95, 0x3b, - 0x04, 0x04, 0x47, 0x0f, 0x14, 0x1c, 0x3d, 0xcd, - 0x0e, 0x93, 0x6a, 0x24, 0x2d, 0xbc, 0xb1, 0xb0, - 0xd2, 0xf9, 0xab, 0x59, 0x7b, 0x6a, 0x05, 0x1b, - 0xd0, 0x16, 0x02, 0x09, 0xf2, 0x08, 0xf2, 0x08, - 0x78, 0x8d, 0x34, 0xf2, 0x18, 0x34, 0x80, 0xf4, - 0x19, 0xb3, 0x7c, 0xea, 0x94, 0x2a, 0x92, 0x77, - 0xd4, 0x73, 0x2c, 0x3c, 0x47, 0x41, 0x7f, 0x46, - 0x6a, 0xa3, 0x87, 0xe0, 0x21, 0xd0, 0x8c, 0x19, - 0x44, 0x73, 0x7f, 0x5b, 0x65, 0xfb, 0x74, 0x52, - 0x71, 0xca, 0x24, 0xc5, 0xba, 0x3d, 0x05, 0x93, - 0x62, 0xc2, 0x2d, 0x80, 0x84, 0x58, 0x95, 0xba, - 0x38, 0x17, 0x4c, 0x88, 0x91, 0x67, 0xbe, 0xdc, - 0x90, 0x12, 0x8b, 0x4f, 0x89, 0xd5, 0x30, 0xb7, - 0x7d, 0x9c, 0x9c, 0x58, 0x22, 0x27, 0x41, 0x56, - 0x0c, 0xb2, 0x62, 0x90, 0x15, 0xab, 0x6c, 0x56, - 0x2c, 0x12, 0xfb, 0x6e, 0x91, 0x27, 0xae, 0x70, - 0xd9, 0x50, 0x97, 0x06, 0x81, 0x83, 0x5d, 0x62, - 0x1b, 0x73, 0xa5, 0x61, 0xf0, 0x97, 0x50, 0x01, - 0xaa, 0x62, 0x4e, 0xfe, 0x56, 0xba, 0x16, 0xdb, - 0x74, 0x82, 0x45, 0x1a, 0x93, 0x3b, 0xa6, 0xdc, - 0x0f, 0x57, 0x3f, 0x6d, 0x7b, 0xbd, 0x18, 0x30, - 0xba, 0x13, 0x03, 0x46, 0x7f, 0xe5, 0x06, 0xb4, - 0xf1, 0x37, 0xb5, 0x73, 0xb7, 0x1a, 0x1c, 0xfa, - 0x78, 0xc9, 0xed, 0xcc, 0xa5, 0xa2, 0xdc, 0xd9, - 0x69, 0x9c, 0xff, 0x58, 0xf1, 0xfc, 0xe7, 0xd5, - 0xb0, 0x81, 0xe5, 0x15, 0x08, 0x15, 0xa5, 0xb3, - 0x3c, 0xaa, 0xa9, 0xe4, 0xf7, 0x63, 0x73, 0xbc, - 0x86, 0x63, 0xc9, 0x35, 0x40, 0xd0, 0x28, 0xad, - 0x88, 0xd7, 0xf1, 0x34, 0xdd, 0x6a, 0xe0, 0x69, - 0xba, 0x80, 0xa7, 0xa9, 0x8d, 0x78, 0xb7, 0x95, - 0xc8, 0x1b, 0x06, 0x12, 0x4e, 0x4c, 0xdd, 0x99, - 0x5a, 0x96, 0xc9, 0x66, 0x76, 0xa3, 0x7c, 0x8b, - 0x86, 0x98, 0xe8, 0x4b, 0x48, 0x1d, 0x72, 0xf9, - 0x90, 0x30, 0x04, 0x6c, 0x4d, 0xac, 0xe3, 0x53, - 0xe5, 0xd8, 0xd3, 0x1e, 0x1d, 0x9f, 0x8f, 0x62, - 0xd8, 0x12, 0xa0, 0xbd, 0x36, 0x6c, 0x70, 0x7c, - 0x54, 0x8c, 0x6c, 0xc5, 0xc1, 0x3a, 0x6d, 0xc1, - 0x0e, 0x45, 0xd9, 0x3e, 0x01, 0xde, 0x29, 0xe9, - 0x97, 0xc6, 0x5f, 0xb0, 0x15, 0xc1, 0x56, 0x84, - 0xe0, 0x18, 0xb9, 0x6a, 0xd8, 0x15, 0x4d, 0x53, - 0x10, 0xbb, 0x72, 0x2f, 0x13, 0xd4, 0x80, 0x5e, - 0x29, 0x80, 0x5e, 0xe9, 0x95, 0x8d, 0x5e, 0x89, - 0x1b, 0x64, 0xfc, 0x00, 0x5f, 0xbe, 0xde, 0xaa, - 0x2a, 0x52, 0x82, 0x1f, 0x1a, 0xf3, 0x62, 0x91, - 0x2f, 0xb5, 0x21, 0x48, 0x51, 0x88, 0xee, 0x44, - 0xf1, 0xb1, 0x07, 0x7a, 0x18, 0xba, 0x77, 0x1c, - 0x82, 0x39, 0x37, 0x1a, 0x51, 0x0d, 0x4a, 0x72, - 0x8b, 0x50, 0x11, 0xd1, 0xc9, 0xe0, 0xad, 0x2e, - 0xdf, 0x3d, 0x69, 0x4a, 0x0f, 0xb2, 0x72, 0x11, - 0xfc, 0x88, 0x07, 0xfa, 0x90, 0x5a, 0xd6, 0xce, - 0x11, 0x67, 0x5f, 0xf4, 0xdd, 0x2b, 0xfd, 0x02, - 0xf3, 0x62, 0x30, 0x8b, 0xb9, 0x5e, 0x55, 0x17, - 0x38, 0x3d, 0x9e, 0xa5, 0x00, 0x86, 0x25, 0x37, - 0x6e, 0xa5, 0x08, 0x56, 0x25, 0x3f, 0xb2, 0x24, - 0x3f, 0x9a, 0xa4, 0x10, 0x82, 0xa4, 0x0c, 0xa0, - 0x47, 0x21, 0x9c, 0x5f, 0x2c, 0xa7, 0x16, 0xde, - 0xd1, 0x6b, 0x86, 0xf3, 0x7b, 0x21, 0xc1, 0xc3, - 0x41, 0xf2, 0xd4, 0x54, 0xd6, 0xe0, 0xc9, 0x0e, - 0x56, 0x2b, 0x01, 0xa8, 0x56, 0x18, 0xa4, 0x56, - 0x06, 0x40, 0xad, 0x38, 0x38, 0xad, 0x38, 0x30, - 0xad, 0x38, 0x28, 0xad, 0x14, 0x40, 0x5a, 0x99, - 0xf8, 0xb1, 0x3c, 0x10, 0xd0, 0x3e, 0x71, 0xb8, - 0x9d, 0x20, 0x9c, 0x59, 0x29, 0x51, 0x63, 0x6f, - 0x71, 0xad, 0xd5, 0x07, 0x07, 0x9a, 0xc6, 0xaf, - 0x4e, 0xe7, 0x53, 0x97, 0xe3, 0x4f, 0x97, 0x12, - 0xd6, 0x7d, 0x49, 0x24, 0xec, 0x1c, 0xdc, 0x4e, - 0x3b, 0x25, 0x3b, 0xc7, 0xbb, 0xd3, 0x1b, 0xce, - 0xc3, 0x4e, 0x51, 0x99, 0xd7, 0x40, 0x3b, 0x1b, - 0x63, 0x32, 0x21, 0xf5, 0x06, 0x17, 0xaf, 0x25, - 0x59, 0x7b, 0x7b, 0xef, 0x48, 0x91, 0x98, 0x5c, - 0xed, 0xa5, 0xa8, 0x59, 0x98, 0x29, 0xbf, 0x59, - 0x3c, 0xa9, 0x9a, 0x3e, 0xa1, 0x5a, 0x4a, 0x18, - 0xa6, 0x14, 0x89, 0xd6, 0xca, 0x90, 0xe8, 0x56, - 0xb5, 0x25, 0x72, 0x2b, 0x31, 0x63, 0x4c, 0x5d, - 0x8f, 0xb9, 0x81, 0x54, 0xd6, 0x59, 0x1c, 0x13, - 0xaa, 0xc4, 0xca, 0x11, 0xa2, 0x5b, 0x31, 0xc2, - 0xbc, 0xd4, 0x33, 0xa6, 0x5d, 0xea, 0xb4, 0x05, - 0x75, 0xab, 0xbe, 0x85, 0xf0, 0x65, 0xdb, 0x48, - 0xab, 0x88, 0x0f, 0x06, 0xf2, 0x83, 0x90, 0x79, - 0x8f, 0xcc, 0xb6, 0x45, 0xc8, 0x14, 0xcc, 0x6c, - 0x6c, 0x91, 0x1b, 0x0d, 0x70, 0xe3, 0x8a, 0xff, - 0xfb, 0xd7, 0xd6, 0x7f, 0xf0, 0xff, 0xfe, 0x56, - 0x29, 0x6e, 0xd5, 0x4e, 0x9d, 0x5b, 0x83, 0x5d, - 0x14, 0x78, 0xf5, 0x54, 0x78, 0xb5, 0x5d, 0x63, - 0x5e, 0x1d, 0xf0, 0x57, 0x02, 0x5e, 0x3d, 0x1d, - 0x5e, 0xed, 0xd4, 0xcc, 0x6c, 0x15, 0xba, 0x54, - 0x65, 0xa3, 0x55, 0x38, 0x79, 0x60, 0xb2, 0xd6, - 0x53, 0xb1, 0x6e, 0x31, 0xab, 0x50, 0xa6, 0x23, - 0x97, 0x4d, 0x6d, 0x53, 0x65, 0x96, 0xbd, 0x59, - 0x8e, 0x12, 0x18, 0x57, 0x11, 0x2d, 0x3b, 0x98, - 0x52, 0xcb, 0xa7, 0xb6, 0xa2, 0xfc, 0x2a, 0x06, - 0xd7, 0xa4, 0x36, 0xea, 0x07, 0xc1, 0x48, 0xe0, - 0xd7, 0xe3, 0x05, 0xb3, 0x2a, 0x83, 0x93, 0x6a, - 0x2b, 0x88, 0x93, 0x7a, 0xc7, 0x5c, 0x12, 0x2a, - 0x66, 0x51, 0x09, 0xf4, 0xa5, 0x9e, 0x06, 0x04, - 0x55, 0x11, 0x04, 0x55, 0xab, 0x62, 0xf5, 0x7f, - 0x1c, 0x6c, 0x11, 0xdf, 0x27, 0x00, 0x0c, 0x78, - 0x09, 0x0c, 0x48, 0x9e, 0x18, 0x80, 0x05, 0x54, - 0x1e, 0x16, 0x50, 0xdf, 0xa4, 0x7e, 0x09, 0xa6, - 0x58, 0xb7, 0x5b, 0x67, 0x23, 0xac, 0x4a, 0xe5, - 0x86, 0x92, 0x37, 0x4c, 0x6f, 0x82, 0x2d, 0x4b, - 0x6c, 0x85, 0xe2, 0x82, 0x2e, 0xfe, 0x90, 0x9b, - 0xe3, 0x27, 0xe6, 0x93, 0x9f, 0x56, 0x7b, 0x25, - 0x7a, 0x20, 0xee, 0x84, 0x8a, 0xd6, 0x73, 0xd8, - 0x71, 0x2c, 0x71, 0x04, 0x80, 0x32, 0xdb, 0x43, - 0x63, 0xfc, 0x44, 0x90, 0x3f, 0x26, 0x1e, 0x41, - 0x41, 0xa6, 0x1b, 0xe1, 0x27, 0x4c, 0x2d, 0x79, - 0x48, 0xc3, 0x67, 0xe2, 0x9b, 0xc9, 0x2b, 0x49, - 0x64, 0x49, 0xfc, 0x6c, 0xf9, 0xcc, 0xbc, 0x43, - 0xca, 0xbe, 0x05, 0x47, 0xd3, 0x11, 0x47, 0xd8, - 0xe9, 0x70, 0xde, 0xb8, 0x0a, 0xda, 0xe5, 0xe5, - 0xc6, 0x26, 0xb8, 0xb8, 0xe0, 0x8b, 0x64, 0x3c, - 0x9d, 0xa1, 0xa0, 0x49, 0x5d, 0x77, 0xc4, 0xc7, - 0x0a, 0xa4, 0x10, 0xa0, 0x3e, 0xc2, 0xdd, 0x57, - 0x0f, 0x80, 0x1f, 0xb5, 0xd2, 0x65, 0x7b, 0x81, - 0x6c, 0x9c, 0x03, 0x64, 0xa3, 0x32, 0xb1, 0x6f, - 0xad, 0xda, 0x22, 0x15, 0x6d, 0xc7, 0xee, 0x46, - 0xb9, 0x56, 0x1f, 0x41, 0x55, 0xa5, 0x8a, 0x88, - 0x15, 0xab, 0x42, 0x78, 0xac, 0xc2, 0x81, 0x89, - 0x49, 0xc1, 0x05, 0xeb, 0x69, 0xdd, 0x06, 0x14, - 0x45, 0x8f, 0x55, 0x2c, 0xb2, 0x7c, 0x7c, 0x98, - 0xec, 0xbf, 0x1d, 0x33, 0xb6, 0xb0, 0x04, 0x91, - 0xd6, 0x2b, 0x44, 0x58, 0x14, 0xa8, 0x8f, 0x06, - 0x38, 0x05, 0x0f, 0xb9, 0x0d, 0x1e, 0xd2, 0xad, - 0xec, 0x09, 0xd4, 0xf3, 0x93, 0xad, 0x3f, 0x94, - 0x46, 0xa6, 0x3a, 0x20, 0x53, 0x79, 0x64, 0xaa, - 0x7b, 0x08, 0x99, 0xea, 0x54, 0x56, 0xa6, 0x7a, - 0x20, 0x53, 0x09, 0x32, 0xd5, 0x03, 0x99, 0xca, - 0x23, 0x53, 0xe7, 0x87, 0x90, 0xa9, 0x5e, 0x65, - 0x65, 0xea, 0x02, 0x64, 0x2a, 0x41, 0xa6, 0xda, - 0x20, 0x53, 0x79, 0x64, 0xaa, 0x73, 0x08, 0x99, - 0x6a, 0x57, 0x56, 0xa6, 0xba, 0x20, 0x53, 0x09, - 0x32, 0xd5, 0x02, 0x99, 0xca, 0x23, 0x53, 0xda, - 0x21, 0x64, 0xaa, 0x05, 0xf5, 0x5c, 0x6b, 0x29, - 0x53, 0x1a, 0xc8, 0x54, 0x1e, 0x99, 0x6a, 0x1f, - 0x42, 0xa6, 0xaa, 0x5b, 0xbd, 0xae, 0x03, 0x32, - 0x15, 0x2f, 0x53, 0xaf, 0x41, 0xa4, 0xf2, 0x88, - 0x54, 0xeb, 0x00, 0x22, 0xf5, 0x1a, 0x7a, 0x3f, - 0xd4, 0x51, 0xa2, 0x2e, 0x40, 0xa2, 0x72, 0x48, - 0xd4, 0xe5, 0x01, 0x04, 0xea, 0x42, 0xfd, 0xf0, - 0x44, 0x4b, 0x41, 0x81, 0x3a, 0x07, 0x81, 0xca, - 0x21, 0x50, 0x17, 0x07, 0x10, 0xa8, 0x73, 0xf5, - 0xf3, 0x52, 0x2a, 0x0a, 0x14, 0x84, 0xd0, 0xf3, - 0x08, 0xd4, 0x21, 0x22, 0xe8, 0x3d, 0xf5, 0x93, - 0x52, 0x2a, 0x0a, 0x14, 0x60, 0x27, 0xf2, 0x08, - 0xd4, 0x21, 0xa0, 0x13, 0x5d, 0xf5, 0xa3, 0xe7, - 0x2a, 0x0a, 0x14, 0x00, 0x27, 0xf2, 0x08, 0xd4, - 0x21, 0x70, 0x13, 0x1d, 0xf5, 0xc3, 0x7c, 0x2a, - 0x0a, 0x14, 0x64, 0x78, 0xf3, 0x08, 0xd4, 0x21, - 0x12, 0xbc, 0x6d, 0xe8, 0x67, 0x5c, 0xcb, 0x5c, - 0x14, 0x08, 0x54, 0x0e, 0x81, 0x3a, 0x48, 0x26, - 0x0a, 0xda, 0x28, 0xd5, 0x51, 0xa0, 0x00, 0x2f, - 0x91, 0x2b, 0x11, 0x75, 0x00, 0x81, 0x2a, 0x94, - 0xeb, 0xca, 0x57, 0x66, 0xeb, 0x08, 0xc2, 0xd9, - 0x02, 0xe1, 0x8c, 0x17, 0xce, 0x4b, 0x10, 0xce, - 0x1c, 0xc2, 0xf9, 0xfa, 0x00, 0xc2, 0x79, 0x09, - 0x7d, 0x32, 0xf7, 0x22, 0x50, 0x50, 0x94, 0x32, - 0xa7, 0x96, 0x49, 0xac, 0x7b, 0x10, 0xea, 0x93, - 0x26, 0x73, 0xc4, 0xc9, 0xfa, 0x09, 0xb1, 0xa7, - 0xcd, 0xe4, 0xf2, 0x3e, 0x25, 0xaa, 0x96, 0x23, - 0x56, 0xa3, 0x0a, 0x4b, 0xe3, 0xff, 0x54, 0xa4, - 0x18, 0xc0, 0x54, 0x1c, 0x32, 0xb6, 0xa8, 0x4d, - 0x2a, 0x51, 0x0f, 0x60, 0x62, 0x93, 0x09, 0xb3, - 0xa9, 0xa1, 0xcf, 0xa8, 0x39, 0x22, 0x5c, 0xf1, - 0x45, 0x1d, 0x09, 0x87, 0x52, 0x01, 0x75, 0x3b, - 0x97, 0xbc, 0x55, 0xa2, 0xa4, 0xa3, 0x68, 0xfd, - 0x78, 0xb9, 0x77, 0x86, 0xdc, 0xaa, 0x90, 0x58, - 0x2a, 0x2c, 0x39, 0xed, 0x53, 0xab, 0x5b, 0xd7, - 0xee, 0x29, 0x58, 0xb7, 0xee, 0x4b, 0x20, 0x72, - 0x50, 0x9e, 0xae, 0x40, 0x79, 0x3a, 0xad, 0xca, - 0x0d, 0x3e, 0x3b, 0x95, 0x6a, 0xf0, 0x59, 0xed, - 0xde, 0x8f, 0x3b, 0xf6, 0x27, 0xef, 0x30, 0x8d, - 0x3d, 0x3b, 0x75, 0x6d, 0xec, 0xe9, 0x19, 0x2e, - 0xb3, 0x2c, 0x59, 0x93, 0x03, 0x7a, 0x7b, 0x1e, - 0xb7, 0xb7, 0xe7, 0xa9, 0x74, 0xe8, 0x4c, 0x62, - 0xb9, 0xc2, 0xdb, 0x72, 0xbd, 0x6b, 0x71, 0x2e, - 0xa7, 0x46, 0x0f, 0x9c, 0xfb, 0x7a, 0x37, 0xeb, - 0x4c, 0x77, 0x66, 0x0a, 0xca, 0x72, 0x16, 0x57, - 0x08, 0xa5, 0x28, 0x86, 0x22, 0x3e, 0x6f, 0x54, - 0x43, 0xc3, 0x80, 0x99, 0x07, 0xd8, 0xd5, 0x57, - 0xfb, 0xe4, 0xa9, 0x97, 0xea, 0x5c, 0x6f, 0x8e, - 0x78, 0x71, 0xdc, 0x4a, 0x7b, 0x17, 0x50, 0x69, - 0x0f, 0x9a, 0x23, 0xe6, 0xf3, 0xaa, 0x37, 0x45, - 0xbb, 0xd6, 0x52, 0x1d, 0x6e, 0xec, 0x5c, 0x26, - 0xca, 0x0f, 0x90, 0xf5, 0x17, 0xb3, 0x84, 0x68, - 0xda, 0xb0, 0x35, 0x34, 0x41, 0x28, 0x6f, 0x4b, - 0x1a, 0x13, 0xe3, 0x71, 0x23, 0x27, 0x2b, 0x3e, - 0xd0, 0xa9, 0x3d, 0xa4, 0x36, 0xf5, 0xc9, 0x92, - 0x87, 0x33, 0xf7, 0xf3, 0x8a, 0x5f, 0xf0, 0x8f, - 0x74, 0x42, 0x7d, 0xb4, 0x22, 0x8c, 0x7c, 0x96, - 0x3b, 0x2e, 0xaa, 0x70, 0xd7, 0xb0, 0x8d, 0x6c, - 0x6f, 0xd4, 0x3c, 0x7e, 0xb3, 0x3d, 0x62, 0x89, - 0xd5, 0x1c, 0x32, 0x17, 0x4d, 0x6d, 0x4b, 0x4c, - 0x2b, 0x31, 0xd7, 0x26, 0xf6, 0xd5, 0x11, 0xe5, - 0x3d, 0x63, 0x78, 0x78, 0x9b, 0x80, 0xe9, 0xe2, - 0x19, 0x67, 0x43, 0x53, 0x94, 0xc6, 0x16, 0x3d, - 0x8f, 0xd2, 0xaf, 0x0c, 0x24, 0x69, 0xf6, 0xad, - 0x1d, 0x02, 0x16, 0xd3, 0x99, 0xad, 0xb3, 0xa9, - 0xef, 0x4c, 0xfd, 0x46, 0xb9, 0x7b, 0x01, 0x62, - 0x36, 0xfa, 0x2c, 0x09, 0x57, 0x45, 0x2d, 0x14, - 0x6b, 0xff, 0x57, 0xae, 0x5e, 0x00, 0xc9, 0x52, - 0x01, 0xa9, 0xb0, 0x53, 0xb2, 0x1e, 0xc9, 0xdc, - 0xf3, 0x5d, 0xf6, 0x48, 0xf6, 0x20, 0x5c, 0xbf, - 0x2c, 0x68, 0x83, 0x7c, 0x81, 0x7c, 0xe5, 0x94, - 0xaf, 0x4e, 0x9d, 0xca, 0x9e, 0xf7, 0xea, 0xec, - 0x7d, 0xe5, 0xaf, 0x0a, 0x9e, 0x33, 0x22, 0xd2, - 0x77, 0xa8, 0xbd, 0xae, 0x9a, 0x3c, 0x7e, 0xbd, - 0xe6, 0x08, 0xe8, 0x78, 0xc2, 0xa6, 0xb6, 0xaf, - 0x08, 0x4e, 0x33, 0x5f, 0xc4, 0x2a, 0x52, 0x3a, - 0xe2, 0x0c, 0xf5, 0x42, 0xf0, 0x44, 0x6c, 0x0a, - 0xc0, 0xc6, 0x84, 0x88, 0x09, 0x5f, 0xfd, 0x5d, - 0xe1, 0xba, 0x72, 0xa7, 0x8a, 0x6e, 0x8e, 0x0d, - 0xff, 0x70, 0x89, 0x11, 0xa8, 0x1d, 0xaf, 0x22, - 0x02, 0x53, 0x98, 0xcf, 0xe3, 0x2d, 0x0c, 0x39, - 0xcc, 0x22, 0xa4, 0x33, 0xef, 0xbd, 0x70, 0xb0, - 0x46, 0xd9, 0x68, 0x6f, 0xb5, 0x5c, 0x63, 0xc7, - 0xc2, 0x06, 0x19, 0x33, 0xcb, 0x24, 0xee, 0x59, - 0x0d, 0x9e, 0x54, 0x99, 0x8e, 0xa8, 0x1d, 0x05, - 0x91, 0x65, 0xfd, 0x45, 0xfe, 0xf9, 0xd0, 0xd8, - 0xb2, 0x6d, 0x1a, 0xf3, 0xf4, 0x0a, 0x13, 0xfa, - 0xa6, 0x1e, 0x0a, 0x98, 0xd6, 0xad, 0x08, 0xcc, - 0xa9, 0x30, 0xa6, 0xad, 0xf2, 0xb0, 0xa7, 0x5d, - 0xc1, 0x0e, 0xfe, 0xea, 0x87, 0x41, 0xb6, 0x75, - 0xeb, 0x8a, 0x6c, 0x33, 0xd8, 0xc4, 0xc1, 0x3e, - 0x1d, 0x50, 0x8b, 0xfa, 0x73, 0x40, 0xb7, 0x01, - 0xba, 0xed, 0x30, 0xe8, 0xb6, 0x5d, 0x6c, 0x77, - 0xe2, 0x08, 0xb7, 0x8d, 0xe9, 0x01, 0x94, 0x1b, - 0xa0, 0xdc, 0x8e, 0x86, 0x72, 0x2b, 0xb1, 0xb1, - 0x60, 0x19, 0x98, 0x9a, 0x4e, 0x5b, 0xcd, 0x53, - 0x62, 0x59, 0x9b, 0x47, 0xcb, 0x0e, 0xd1, 0xa1, - 0x5e, 0x40, 0x13, 0x3c, 0x47, 0x06, 0xe6, 0xee, - 0x04, 0xf2, 0xd8, 0x84, 0x6c, 0x36, 0x94, 0xf6, - 0x19, 0x1a, 0x10, 0xd9, 0x55, 0x9a, 0xda, 0x06, - 0x73, 0x5d, 0x3e, 0xbd, 0xd6, 0xfc, 0x15, 0x12, - 0x14, 0xe6, 0x08, 0xbb, 0x9c, 0x88, 0x6d, 0xcd, - 0xd1, 0x98, 0xb8, 0xb2, 0xbf, 0x34, 0x7f, 0x01, - 0x36, 0x43, 0x73, 0x36, 0x15, 0x17, 0x33, 0xe6, - 0x3e, 0xf2, 0x9f, 0xb0, 0xa9, 0x6d, 0x22, 0x83, - 0x8f, 0x02, 0x53, 0x7b, 0x93, 0x36, 0xe7, 0x68, - 0x24, 0xc6, 0xc7, 0x2f, 0xed, 0x11, 0xf2, 0xe6, - 0x9e, 0x4f, 0x26, 0xfc, 0x89, 0x63, 0xec, 0x23, - 0xce, 0xef, 0x62, 0x21, 0x4d, 0x3a, 0x1c, 0x72, - 0xd2, 0xb6, 0x8f, 0xfc, 0x45, 0xbb, 0x6b, 0xf9, - 0x36, 0x94, 0xb9, 0x95, 0x6d, 0x63, 0x7d, 0xf0, - 0xfe, 0xd3, 0xf1, 0x5e, 0xdd, 0xc5, 0xab, 0x6e, - 0xaf, 0xd5, 0xbb, 0x6c, 0x69, 0xbd, 0xf6, 0x65, - 0xa7, 0x7b, 0xae, 0x5d, 0x76, 0x48, 0xb3, 0xf5, - 0x1a, 0xba, 0x5a, 0xd7, 0xac, 0xab, 0xf5, 0x9a, - 0x12, 0x13, 0xd1, 0x60, 0xa1, 0x81, 0x49, 0x73, - 0x20, 0x32, 0x84, 0xf6, 0xa8, 0x29, 0x51, 0xc0, - 0x03, 0xf6, 0xac, 0xf2, 0xe9, 0x74, 0xfd, 0x66, - 0x31, 0x6c, 0xf4, 0xc8, 0xd5, 0x8e, 0xd8, 0x39, - 0xb8, 0xd2, 0x50, 0xea, 0x94, 0x3a, 0x1c, 0x24, - 0xaf, 0x80, 0x74, 0x99, 0xc4, 0x22, 0xfe, 0x89, - 0x89, 0xd6, 0x9d, 0x1c, 0x33, 0xc8, 0x15, 0x20, - 0x94, 0x4a, 0x96, 0xab, 0x75, 0x04, 0x40, 0x58, - 0xa3, 0xc9, 0xe5, 0x56, 0xa7, 0x9f, 0xd9, 0x39, - 0xcd, 0xc8, 0xd0, 0x5f, 0xc5, 0x43, 0xd0, 0xed, - 0xfa, 0x43, 0xd0, 0x67, 0x67, 0x69, 0xcd, 0xde, - 0x05, 0x20, 0x1f, 0x0f, 0x10, 0xc3, 0xe5, 0x49, - 0x2f, 0xe0, 0x8e, 0xca, 0xc3, 0xf5, 0x45, 0x1c, - 0xf1, 0x0a, 0xb6, 0x25, 0x3d, 0xdc, 0x96, 0xea, - 0xbc, 0x0f, 0xad, 0x1f, 0xcc, 0x7a, 0x7d, 0xdc, - 0x83, 0x59, 0x5a, 0x1b, 0x4e, 0x66, 0x41, 0x59, - 0xb0, 0xfc, 0x42, 0xb9, 0xf4, 0xc4, 0x54, 0x93, - 0xcb, 0xcb, 0x23, 0xcb, 0x65, 0x07, 0xe4, 0x12, - 0x30, 0x34, 0xea, 0x23, 0x5b, 0x3a, 0x2a, 0x22, - 0x5b, 0x36, 0xac, 0x6e, 0xa8, 0x9c, 0xa4, 0x2a, - 0x40, 0xa5, 0x57, 0xb1, 0xca, 0x49, 0x35, 0x80, - 0x20, 0x24, 0x15, 0x50, 0x5a, 0x7b, 0xfd, 0xc3, - 0xa0, 0x4d, 0x7a, 0x35, 0x45, 0x9b, 0x74, 0xaa, - 0xba, 0xba, 0x87, 0x82, 0x5d, 0x14, 0x81, 0x4c, - 0x3c, 0x92, 0x79, 0x68, 0xa9, 0x7a, 0x75, 0x00, - 0x4c, 0x2c, 0xcf, 0x55, 0xe4, 0x79, 0xf8, 0x53, - 0x91, 0x9b, 0xf7, 0x0c, 0xd5, 0xb8, 0x16, 0x74, - 0xe5, 0x79, 0x0c, 0xb9, 0x38, 0x78, 0x71, 0x99, - 0x62, 0x81, 0x2a, 0x6b, 0x1a, 0x88, 0x9d, 0xcb, - 0xc1, 0xa6, 0x99, 0x1f, 0x18, 0x10, 0xc0, 0x23, - 0x0a, 0x12, 0x91, 0xdb, 0xef, 0x92, 0x44, 0x3e, - 0xc8, 0x88, 0xc4, 0x8a, 0x64, 0x7d, 0x8f, 0x1c, - 0x3e, 0x65, 0x00, 0x30, 0x24, 0xe6, 0xef, 0x7c, - 0xc9, 0xd9, 0x2c, 0x3c, 0x28, 0x15, 0x7e, 0xa6, - 0xcf, 0xe4, 0x87, 0x29, 0x39, 0xa2, 0xea, 0x51, - 0x4a, 0x6f, 0x8c, 0xc5, 0x60, 0xc4, 0x36, 0xdf, - 0xb8, 0xa2, 0xf6, 0xbe, 0xdd, 0xcb, 0x07, 0x97, - 0x90, 0xdf, 0x28, 0x09, 0xa7, 0xd4, 0xe7, 0x57, - 0xfa, 0x13, 0xbf, 0xcc, 0x30, 0x99, 0xa5, 0x4d, - 0x68, 0x89, 0x93, 0xba, 0x66, 0x2f, 0x51, 0x91, - 0x0f, 0xb1, 0xb1, 0xd5, 0x94, 0x97, 0x7c, 0x7e, - 0x65, 0x15, 0x87, 0xdd, 0x85, 0x9f, 0x92, 0x26, - 0xac, 0xbf, 0xa4, 0xb1, 0x9c, 0x35, 0x31, 0x69, - 0xcd, 0x15, 0xed, 0xb3, 0x14, 0xef, 0x77, 0x96, - 0x6e, 0xc9, 0x52, 0x9d, 0xb8, 0x29, 0xc5, 0x93, - 0xae, 0x89, 0x2f, 0x58, 0x67, 0xd5, 0x5f, 0x09, - 0x7c, 0x5c, 0x0a, 0xd7, 0xf4, 0x97, 0xd5, 0x14, - 0x83, 0x63, 0xaa, 0xaa, 0x63, 0x7a, 0x5e, 0x29, - 0xc7, 0x34, 0x59, 0xaa, 0x2b, 0xee, 0x96, 0xae, - 0xc9, 0xcb, 0x61, 0x9c, 0xd2, 0xf3, 0x23, 0x3b, - 0xa5, 0x51, 0x63, 0x89, 0x1e, 0xc7, 0xcb, 0x97, - 0x49, 0x05, 0xce, 0x7d, 0x79, 0x53, 0xf0, 0xf6, - 0x49, 0x6b, 0x1d, 0x3f, 0x55, 0x31, 0x61, 0xd9, - 0x88, 0xb1, 0xbe, 0x18, 0xe7, 0xe6, 0x18, 0x37, - 0xbe, 0x7c, 0x83, 0xe5, 0x3e, 0xdf, 0x0c, 0xba, - 0x64, 0x2c, 0xc3, 0xdc, 0x9b, 0x1f, 0x23, 0x97, - 0x78, 0x0e, 0xb3, 0x3d, 0xfe, 0x36, 0xad, 0xc6, - 0x55, 0x98, 0xd5, 0x9f, 0xd1, 0xef, 0xd8, 0x35, - 0x75, 0xc3, 0x62, 0x62, 0xf4, 0x1b, 0xbf, 0x5f, - 0x3c, 0x67, 0x9b, 0xf6, 0xea, 0x4d, 0xde, 0x9c, - 0x49, 0x83, 0x66, 0x88, 0x0d, 0x72, 0xf5, 0xc3, - 0xff, 0x03, 0xf2, 0x9f, 0x91, 0xe8, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29, 0x6f, - 0x72, 0x67, 0x2f, 0x00, 0x03, 0x00, 0x00, 0x00, - 0x2f, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, - 0x74, 0x69, 0x6c, 0x64, 0x61, 0x2f, 0x00, 0x00, - 0x05, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x74, 0x69, 0x6c, 0x64, - 0x61, 0x2d, 0x73, 0x65, 0x61, 0x72, 0x63, 0x68, - 0x2d, 0x62, 0x6f, 0x78, 0x2e, 0x75, 0x69, 0x00, - 0x4e, 0x13, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, - 0x78, 0xda, 0xed, 0x98, 0x5d, 0x4f, 0xdb, 0x30, - 0x14, 0x86, 0xef, 0xf9, 0x15, 0x9e, 0x77, 0xb9, - 0xf5, 0x0b, 0xb6, 0x69, 0x48, 0x49, 0x90, 0x40, - 0x83, 0x9b, 0x6d, 0x42, 0x1b, 0xbb, 0x8e, 0x1c, - 0xe7, 0x24, 0xf1, 0x70, 0xed, 0xcc, 0x3e, 0x29, - 0xe5, 0xdf, 0xef, 0xa4, 0x69, 0xa1, 0xac, 0x81, - 0x36, 0xdd, 0x80, 0xa9, 0x42, 0xb9, 0xb1, 0x9d, - 0xf3, 0xc6, 0xc7, 0x79, 0x9f, 0x63, 0xc5, 0x09, - 0x8e, 0xa6, 0x63, 0xcd, 0x26, 0xe0, 0xbc, 0xb2, - 0x26, 0xe4, 0xa3, 0xfe, 0x90, 0x33, 0x30, 0xd2, - 0xa6, 0xca, 0xe4, 0x21, 0xff, 0x71, 0x71, 0xda, - 0xfb, 0xc8, 0x8f, 0xa2, 0xbd, 0xe0, 0x55, 0xaf, - 0xc7, 0xce, 0xc0, 0x80, 0x13, 0x08, 0x29, 0xbb, - 0x52, 0x58, 0xb0, 0x5c, 0x8b, 0x14, 0xd8, 0x41, - 0x7f, 0x74, 0xd8, 0x1f, 0xb2, 0x5e, 0x8f, 0x82, - 0x94, 0x41, 0x70, 0x99, 0x90, 0x10, 0xed, 0x31, - 0x16, 0x38, 0xf8, 0x55, 0x29, 0x07, 0x9e, 0x69, - 0x95, 0x84, 0x3c, 0xc7, 0xcb, 0x37, 0xfc, 0x76, - 0x22, 0x92, 0x7d, 0xe0, 0x83, 0x59, 0x1c, 0xc2, - 0xb8, 0xd4, 0xf4, 0x58, 0x26, 0xb5, 0xf0, 0x3e, - 0xe4, 0x17, 0x4a, 0xa7, 0xe2, 0x3b, 0x08, 0x27, - 0x8b, 0x63, 0x3b, 0xe5, 0xac, 0x14, 0x0e, 0x0c, - 0x86, 0xfc, 0x0c, 0x2f, 0xeb, 0x7e, 0xad, 0x21, - 0x55, 0xe9, 0x6c, 0x09, 0x0e, 0xaf, 0x99, 0x11, - 0x63, 0x08, 0xf9, 0x44, 0x79, 0x95, 0x68, 0xe0, - 0xd1, 0x85, 0xab, 0x20, 0x18, 0x2c, 0xee, 0xb6, - 0x07, 0x4b, 0x61, 0xe2, 0xcc, 0xca, 0xca, 0xf3, - 0xe8, 0x54, 0x68, 0xbf, 0x36, 0xde, 0x3a, 0x45, - 0x19, 0x08, 0xa4, 0xcc, 0x79, 0x44, 0x4b, 0x40, - 0x25, 0x85, 0x5e, 0x11, 0xc9, 0x82, 0x12, 0x6f, - 0xda, 0xd4, 0xb3, 0xc9, 0x4f, 0x90, 0xb8, 0x58, - 0x13, 0xe5, 0xfe, 0x59, 0x24, 0xa0, 0x39, 0x53, - 0x69, 0xc8, 0xf5, 0xac, 0xb9, 0x08, 0xed, 0x9e, - 0x5f, 0x9b, 0xc6, 0xd8, 0xd8, 0x17, 0xf6, 0x2a, - 0x16, 0x5a, 0xb7, 0xbf, 0x84, 0x36, 0xd1, 0x58, - 0xb8, 0x5c, 0x99, 0x18, 0x6d, 0xc9, 0xa3, 0xf7, - 0x1d, 0x04, 0x89, 0x45, 0xb4, 0xe3, 0x0d, 0x35, - 0xcd, 0x6a, 0x19, 0x3a, 0x61, 0x3c, 0xf9, 0x2c, - 0xc8, 0xa6, 0x90, 0x5f, 0x03, 0x2d, 0xae, 0x31, - 0x99, 0x11, 0x34, 0x63, 0x66, 0x2c, 0xb2, 0xcc, - 0x56, 0x26, 0x7d, 0xcb, 0x7c, 0x33, 0x2c, 0x72, - 0xa1, 0x0c, 0x43, 0xcb, 0xa4, 0x35, 0xa8, 0x4c, - 0x05, 0x0c, 0x0b, 0xb8, 0xb9, 0x89, 0xb3, 0x5e, - 0x02, 0x94, 0x8e, 0x21, 0x56, 0xfb, 0xad, 0x99, - 0x08, 0x44, 0xa7, 0x92, 0x0a, 0xc1, 0xdf, 0x0e, - 0x2e, 0x0f, 0xcf, 0x33, 0xcc, 0xac, 0x83, 0xdc, - 0xd5, 0x93, 0x13, 0xa1, 0x42, 0x57, 0x34, 0xf4, - 0x1a, 0x32, 0xc8, 0xf6, 0x0f, 0x9b, 0xab, 0x01, - 0x75, 0x2e, 0x1e, 0xac, 0x3e, 0x34, 0x18, 0x34, - 0x6e, 0xdf, 0xf4, 0x4b, 0x21, 0x2f, 0x29, 0xa9, - 0xfb, 0xdf, 0x09, 0x4c, 0x4b, 0x41, 0xb3, 0x6d, - 0x6e, 0x6f, 0xa6, 0xba, 0xf8, 0x5a, 0x5a, 0xaf, - 0x1a, 0x5a, 0x87, 0xab, 0xe1, 0x34, 0xb2, 0x9c, - 0x5e, 0x30, 0x58, 0x02, 0x77, 0x1d, 0xc4, 0xb3, - 0x82, 0xac, 0x11, 0x6e, 0x6c, 0x20, 0x10, 0xa6, - 0x0f, 0x70, 0xfc, 0x60, 0x51, 0xfe, 0x2b, 0xf0, - 0xe7, 0x48, 0x6a, 0xc8, 0xb0, 0x1b, 0xc4, 0x4e, - 0xe5, 0x45, 0x47, 0xc9, 0xe3, 0x16, 0x8a, 0x27, - 0x5f, 0xc8, 0x16, 0x1e, 0x8d, 0x86, 0xad, 0xe1, - 0x77, 0xbc, 0x69, 0xf7, 0xe7, 0x93, 0x41, 0x77, - 0xdd, 0x38, 0x04, 0xb3, 0xe6, 0x72, 0xf8, 0x16, - 0x06, 0xad, 0x31, 0xa9, 0x8b, 0xac, 0x58, 0x30, - 0x7f, 0xbf, 0xe8, 0xcf, 0x3a, 0x6a, 0xaf, 0xa5, - 0xad, 0xea, 0xa9, 0x7b, 0x4d, 0x75, 0xae, 0xab, - 0x96, 0xda, 0x5a, 0xa9, 0xaf, 0x4d, 0x7d, 0x3c, - 0xae, 0x88, 0x1b, 0xd3, 0x18, 0x99, 0xcc, 0xda, - 0xb1, 0x81, 0x29, 0xae, 0xb1, 0xf3, 0xfe, 0x9d, - 0x36, 0xfe, 0x4a, 0xea, 0x4d, 0x57, 0xf9, 0x94, - 0x54, 0x38, 0x90, 0xa0, 0x26, 0xe0, 0xe3, 0x14, - 0x32, 0x51, 0x69, 0xec, 0xa6, 0xa6, 0xcd, 0x5a, - 0xe5, 0xe4, 0x86, 0x84, 0xfa, 0xcb, 0x63, 0x53, - 0x55, 0xe5, 0x21, 0xa6, 0xbd, 0x1e, 0x9c, 0x56, - 0x06, 0x76, 0x84, 0xc7, 0xd1, 0x93, 0xf3, 0x58, - 0x3a, 0x98, 0x6c, 0xcf, 0xe3, 0x39, 0xa9, 0x5f, - 0x78, 0xdc, 0x5d, 0x1e, 0xf7, 0x1f, 0x97, 0xc7, - 0x93, 0x02, 0xe4, 0x1d, 0x28, 0x65, 0x3d, 0x10, - 0x8f, 0x05, 0xd2, 0x47, 0x89, 0x14, 0x1e, 0xb6, - 0x27, 0xf3, 0x4b, 0xfd, 0x0c, 0x76, 0x22, 0x36, - 0x7f, 0x4f, 0xcf, 0xcb, 0x67, 0x27, 0x4b, 0x8b, - 0xc7, 0x05, 0x74, 0x55, 0x3a, 0x9d, 0x4f, 0x38, - 0xdc, 0x54, 0x90, 0x3a, 0x71, 0x15, 0x2b, 0x93, - 0xd2, 0x11, 0x0b, 0xad, 0xdb, 0x91, 0x6a, 0x38, - 0x78, 0x96, 0x6a, 0xa0, 0x43, 0x0d, 0x4c, 0xb7, - 0x2f, 0x84, 0x6f, 0xb5, 0x7c, 0x07, 0x6b, 0xe0, - 0x85, 0xe6, 0xbf, 0xa4, 0xf9, 0xdd, 0xb6, 0x34, - 0xff, 0xc7, 0xe7, 0xe4, 0x51, 0x97, 0x73, 0x72, - 0x30, 0x58, 0xfc, 0xb3, 0x8a, 0xf6, 0x82, 0xc1, - 0xd2, 0x5f, 0xaf, 0xdf, 0x7a, 0x52, 0xeb, 0x95, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29, 0x6d, - 0x65, 0x6e, 0x75, 0x2e, 0x75, 0x69, 0x00, 0x00, - 0xfe, 0x05, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, - 0x78, 0xda, 0xbd, 0x94, 0x3d, 0x6b, 0xc3, 0x30, - 0x10, 0x86, 0xf7, 0xfc, 0x0a, 0xa1, 0x3d, 0x71, - 0xbb, 0x75, 0x90, 0x9d, 0x21, 0x90, 0x31, 0xa4, - 0xd4, 0x9d, 0xcb, 0x59, 0x7e, 0x9d, 0x0a, 0x64, - 0x29, 0x95, 0xe4, 0xba, 0xf9, 0xf7, 0x95, 0xfb, - 0x45, 0x0a, 0x8e, 0x29, 0xaa, 0xc9, 0xa6, 0x3b, - 0x78, 0xa4, 0xe7, 0x5e, 0xc4, 0x89, 0xf5, 0x5b, - 0xab, 0xd9, 0x2b, 0x9c, 0x57, 0xd6, 0xe4, 0xfc, - 0x76, 0x75, 0xc3, 0x19, 0x8c, 0xb4, 0xb5, 0x32, - 0x87, 0x9c, 0x3f, 0x96, 0xdb, 0xe5, 0x1d, 0x5f, - 0x17, 0x0b, 0xa1, 0x4c, 0x80, 0x6b, 0x48, 0xa2, - 0x58, 0x30, 0x26, 0x5a, 0x98, 0x8e, 0xa9, 0x3a, - 0xe7, 0xc3, 0x81, 0x0f, 0xad, 0xd8, 0xf4, 0x90, - 0x21, 0x5e, 0xf2, 0x59, 0xc5, 0x5a, 0x05, 0xb4, - 0xdf, 0x45, 0x2c, 0x29, 0x04, 0xa7, 0xaa, 0x2e, - 0x80, 0x19, 0x6a, 0x91, 0x73, 0x4d, 0x15, 0x34, - 0x67, 0xc1, 0x91, 0xf1, 0x9a, 0x02, 0x55, 0x3a, - 0x36, 0x4f, 0xf0, 0xbc, 0x78, 0xda, 0xa1, 0x67, - 0x25, 0x55, 0x22, 0xfb, 0x61, 0x26, 0xee, 0xa1, - 0x8f, 0x57, 0x79, 0xd1, 0x2b, 0x53, 0xdb, 0x7e, - 0x65, 0xd0, 0x2f, 0xc3, 0x28, 0x2b, 0xb2, 0x73, - 0xa3, 0x7f, 0xe8, 0x6d, 0xb4, 0xf5, 0x48, 0x16, - 0x94, 0x03, 0xfd, 0x07, 0x45, 0x91, 0xfd, 0x0a, - 0x74, 0xc6, 0x78, 0x37, 0xf6, 0x78, 0x4a, 0x53, - 0x1f, 0x07, 0x67, 0x0b, 0x76, 0x4f, 0x3e, 0x20, - 0xc9, 0xec, 0x78, 0x81, 0x1c, 0x0f, 0x94, 0xcd, - 0x9d, 0x68, 0x69, 0x0f, 0x07, 0x0d, 0xb6, 0xed, - 0xb4, 0xf6, 0xd2, 0x01, 0x26, 0x69, 0x88, 0x66, - 0x0a, 0x9f, 0x2d, 0xe4, 0x2f, 0xd7, 0x07, 0x90, - 0x93, 0xcf, 0x15, 0xb9, 0x24, 0x55, 0x3f, 0x41, - 0x5f, 0x29, 0xf3, 0xbd, 0x43, 0x03, 0x17, 0x77, - 0x15, 0x7c, 0xda, 0x97, 0x99, 0xe4, 0xaf, 0x34, - 0xc4, 0x7d, 0xa7, 0x42, 0x92, 0xfd, 0xcb, 0x38, - 0x78, 0x59, 0x5b, 0x64, 0xc3, 0xae, 0x8e, 0x9b, - 0x3c, 0x3b, 0x5b, 0xe5, 0xef, 0xd4, 0x93, 0xe0, - 0x8f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x28, 0x75, 0x75, 0x61, 0x79, 0x29 -} }; - -static GStaticResource static_resource = { glade_resources_resource_data.data, sizeof (glade_resources_resource_data.data), NULL, NULL, NULL }; -extern GResource *glade_resources_get_resource (void); -GResource *glade_resources_get_resource (void) -{ - return g_static_resource_get_resource (&static_resource); -} -/* - If G_HAS_CONSTRUCTORS is true then the compiler support *both* constructors and - destructors, in a sane way, including e.g. on library unload. If not you're on - your own. - - Some compilers need #pragma to handle this, which does not work with macros, - so the way you need to use this is (for constructors): - - #ifdef G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA - #pragma G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(my_constructor) - #endif - G_DEFINE_CONSTRUCTOR(my_constructor) - static void my_constructor(void) { - ... - } - -*/ - -#ifndef __GTK_DOC_IGNORE__ - -#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7) - -#define G_HAS_CONSTRUCTORS 1 - -#define G_DEFINE_CONSTRUCTOR(_func) static void __attribute__((constructor)) _func (void); -#define G_DEFINE_DESTRUCTOR(_func) static void __attribute__((destructor)) _func (void); - -#elif defined (_MSC_VER) && (_MSC_VER >= 1500) -/* Visual studio 2008 and later has _Pragma */ - -#define G_HAS_CONSTRUCTORS 1 - -/* We do some weird things to avoid the constructors being optimized - * away on VS2015 if WholeProgramOptimization is enabled. First we - * make a reference to the array from the wrapper to make sure its - * references. Then we use a pragma to make sure the wrapper function - * symbol is always included at the link stage. Also, the symbols - * need to be extern (but not dllexport), even though they are not - * really used from another object file. - */ - -/* We need to account for differences between the mangling of symbols - * for Win32 (x86) and x64 programs, as symbols on Win32 are prefixed - * with an underscore but symbols on x64 are not. - */ -#ifdef _WIN64 -#define G_MSVC_SYMBOL_PREFIX "" -#else -#define G_MSVC_SYMBOL_PREFIX "_" -#endif - -#define G_DEFINE_CONSTRUCTOR(_func) G_MSVC_CTOR (_func, G_MSVC_SYMBOL_PREFIX) -#define G_DEFINE_DESTRUCTOR(_func) G_MSVC_DTOR (_func, G_MSVC_SYMBOL_PREFIX) - -#define G_MSVC_CTOR(_func,_sym_prefix) \ - static void _func(void); \ - extern int (* _array ## _func)(void); \ - int _func ## _wrapper(void) { _func(); g_slist_find (NULL, _array ## _func); return 0; } \ - __pragma(comment(linker,"/include:" _sym_prefix # _func "_wrapper")) \ - __pragma(section(".CRT$XCU",read)) \ - __declspec(allocate(".CRT$XCU")) int (* _array ## _func)(void) = _func ## _wrapper; - -#define G_MSVC_DTOR(_func,_sym_prefix) \ - static void _func(void); \ - extern int (* _array ## _func)(void); \ - int _func ## _constructor(void) { atexit (_func); g_slist_find (NULL, _array ## _func); return 0; } \ - __pragma(comment(linker,"/include:" _sym_prefix # _func "_constructor")) \ - __pragma(section(".CRT$XCU",read)) \ - __declspec(allocate(".CRT$XCU")) int (* _array ## _func)(void) = _func ## _constructor; - -#elif defined (_MSC_VER) - -#define G_HAS_CONSTRUCTORS 1 - -/* Pre Visual studio 2008 must use #pragma section */ -#define G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA 1 -#define G_DEFINE_DESTRUCTOR_NEEDS_PRAGMA 1 - -#define G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(_func) \ - section(".CRT$XCU",read) -#define G_DEFINE_CONSTRUCTOR(_func) \ - static void _func(void); \ - static int _func ## _wrapper(void) { _func(); return 0; } \ - __declspec(allocate(".CRT$XCU")) static int (*p)(void) = _func ## _wrapper; - -#define G_DEFINE_DESTRUCTOR_PRAGMA_ARGS(_func) \ - section(".CRT$XCU",read) -#define G_DEFINE_DESTRUCTOR(_func) \ - static void _func(void); \ - static int _func ## _constructor(void) { atexit (_func); return 0; } \ - __declspec(allocate(".CRT$XCU")) static int (* _array ## _func)(void) = _func ## _constructor; - -#elif defined(__SUNPRO_C) - -/* This is not tested, but i believe it should work, based on: - * http://opensource.apple.com/source/OpenSSL098/OpenSSL098-35/src/fips/fips_premain.c - */ - -#define G_HAS_CONSTRUCTORS 1 - -#define G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA 1 -#define G_DEFINE_DESTRUCTOR_NEEDS_PRAGMA 1 - -#define G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(_func) \ - init(_func) -#define G_DEFINE_CONSTRUCTOR(_func) \ - static void _func(void); - -#define G_DEFINE_DESTRUCTOR_PRAGMA_ARGS(_func) \ - fini(_func) -#define G_DEFINE_DESTRUCTOR(_func) \ - static void _func(void); - -#else - -/* constructors not supported for this compiler */ - -#endif - -#endif /* __GTK_DOC_IGNORE__ */ - -#ifdef G_HAS_CONSTRUCTORS - -#ifdef G_DEFINE_CONSTRUCTOR_NEEDS_PRAGMA -#pragma G_DEFINE_CONSTRUCTOR_PRAGMA_ARGS(resource_constructor) -#endif -G_DEFINE_CONSTRUCTOR(resource_constructor) -#ifdef G_DEFINE_DESTRUCTOR_NEEDS_PRAGMA -#pragma G_DEFINE_DESTRUCTOR_PRAGMA_ARGS(resource_destructor) -#endif -G_DEFINE_DESTRUCTOR(resource_destructor) - -#else -#warning "Constructor not supported on this compiler, linking in resources will not work" -#endif - -static void resource_constructor (void) -{ - g_static_resource_init (&static_resource); -} - -static void resource_destructor (void) -{ - g_static_resource_fini (&static_resource); -} diff -Nru tilda-1.5.2/src/glade-resources.h tilda-1.5.4/src/glade-resources.h --- tilda-1.5.2/src/glade-resources.h 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/src/glade-resources.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,7 +0,0 @@ -#ifndef __RESOURCE_glade_resources_H__ -#define __RESOURCE_glade_resources_H__ - -#include - -extern GResource *glade_resources_get_resource (void); -#endif diff -Nru tilda-1.5.2/src/tilda-enum-types.c tilda-1.5.4/src/tilda-enum-types.c --- tilda-1.5.2/src/tilda-enum-types.c 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/src/tilda-enum-types.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - -/* This file is generated by glib-mkenums, do not modify it. This code is licensed under the same license as the containing project. Note that it links to GLib, so must comply with the LGPL linking clauses. */ - -#include "tilda-enum-types.h" -/* enumerations from "../src/tilda-search-box.h" */ -#include "../src/tilda-search-box.h" -GType -tilda_search_direction_get_type (void) -{ - static GType the_type = 0; - - if (the_type == 0) - { - static const GEnumValue values[] = { - { SEARCH_FORWARD, - "SEARCH_FORWARD", - "forward" }, - { SEARCH_BACKWARD, - "SEARCH_BACKWARD", - "backward" }, - { 0, NULL, NULL } - }; - the_type = g_enum_register_static ( - g_intern_static_string ("TildaSearchDirection"), - values); - } - return the_type; -} - -/* Generated data ends here */ - diff -Nru tilda-1.5.2/src/tilda-enum-types.h tilda-1.5.4/src/tilda-enum-types.h --- tilda-1.5.2/src/tilda-enum-types.h 2020-05-10 14:15:56.000000000 +0000 +++ tilda-1.5.4/src/tilda-enum-types.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,18 +0,0 @@ - -/* This file is generated by glib-mkenums, do not modify it. This code is licensed under the same license as the containing project. Note that it links to GLib, so must comply with the LGPL linking clauses. */ - -#ifndef TILDA_ENUM_TYPES_H -#define TILDA_ENUM_TYPES_H - -#include - -G_BEGIN_DECLS -/* Enumerations from "../src/tilda-search-box.h" */ -#define TILDA_TYPE_SEARCH_DIRECTION (tilda_search_direction_get_type()) -GType tilda_search_direction_get_type (void) G_GNUC_CONST; -G_END_DECLS - -#endif - -/* Generated data ends here */ - diff -Nru tilda-1.5.2/src/tilda_terminal.c tilda-1.5.4/src/tilda_terminal.c --- tilda-1.5.2/src/tilda_terminal.c 2020-05-10 14:15:12.000000000 +0000 +++ tilda-1.5.4/src/tilda_terminal.c 2020-12-24 10:31:23.000000000 +0000 @@ -464,7 +464,11 @@ gint command_timeout = config_getint ("command_timeout_ms"); char **envv = malloc(2*sizeof(void *)); - envv[0] = getenv("PATH"); + char *path_value = getenv("PATH"); + + gchar *path_prefixed = g_strconcat("PATH=", path_value, NULL); + + envv[0] = path_prefixed; envv[1] = NULL; vte_terminal_spawn_async (VTE_TERMINAL (tt->vte_term), @@ -483,6 +487,7 @@ g_strfreev (argv); g_free (envv); + g_free(path_prefixed); } else { start_default_shell (tt); } diff -Nru tilda-1.5.2/src/tomboykeybinder.c tilda-1.5.4/src/tomboykeybinder.c --- tilda-1.5.2/src/tomboykeybinder.c 2020-05-10 14:14:54.000000000 +0000 +++ tilda-1.5.4/src/tomboykeybinder.c 2020-12-24 10:31:23.000000000 +0000 @@ -382,7 +382,7 @@ } } -guint32 +Time tomboy_keybinder_get_current_event_time (void) { if (processing_event) diff -Nru tilda-1.5.2/src/tomboykeybinder.h tilda-1.5.4/src/tomboykeybinder.h --- tilda-1.5.2/src/tomboykeybinder.h 2020-05-10 14:14:54.000000000 +0000 +++ tilda-1.5.4/src/tomboykeybinder.h 2020-12-24 10:31:23.000000000 +0000 @@ -25,6 +25,7 @@ #define __TOMBOY_KEY_BINDER_H__ #include +#include G_BEGIN_DECLS @@ -41,7 +42,7 @@ gboolean tomboy_keybinder_is_modifier (guint keycode); -guint32 tomboy_keybinder_get_current_event_time (void); +Time tomboy_keybinder_get_current_event_time (void); G_END_DECLS diff -Nru tilda-1.5.2/src/xerror.c tilda-1.5.4/src/xerror.c --- tilda-1.5.2/src/xerror.c 2020-05-10 14:15:12.000000000 +0000 +++ tilda-1.5.4/src/xerror.c 2020-12-24 10:31:23.000000000 +0000 @@ -32,10 +32,13 @@ gchar errtxt[128]; - if (e->error_code != BadWindow) + /* https://tronche.com/gui/x/xlib/event-handling/protocol-errors/default-handlers.html */ + if ((e->error_code != BadWindow) && + /* https://www.x.org/releases/X11R7.7/doc/xproto/x11protocol.html#requests:SetInputFocus */ + ((e->request_code != 42 /* SetInputFocus */) || (e->error_code != BadMatch))) { XGetErrorText(d, e->error_code, errtxt, 127); - g_error(_("X Error: %s"), errtxt); + g_error(_("X Error [opcode %d]: %s"), e->request_code, errtxt); } return 0; diff -Nru tilda-1.5.2/tilda-config.h.in tilda-1.5.4/tilda-config.h.in --- tilda-1.5.2/tilda-config.h.in 2020-05-10 14:15:44.000000000 +0000 +++ tilda-1.5.4/tilda-config.h.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,126 +0,0 @@ -/* tilda-config.h.in. Generated from configure.ac by autoheader. */ - -/* Enable extra debugging output */ -#undef DEBUG - -/* Enable function call tracing */ -#undef DEBUG_FUNCTIONS - -/* Define to 1 if translation of program messages to the user's native - language is requested. */ -#undef ENABLE_NLS - -/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the - CoreFoundation framework. */ -#undef HAVE_CFLOCALECOPYCURRENT - -/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in - the CoreFoundation framework. */ -#undef HAVE_CFPREFERENCESCOPYAPPVALUE - -/* Define if the GNU dcgettext() function is already present or preinstalled. - */ -#undef HAVE_DCGETTEXT - -/* Define to 1 if you have the header file. */ -#undef HAVE_FCNTL_H - -/* Define if the GNU gettext() function is already present or preinstalled. */ -#undef HAVE_GETTEXT - -/* Define if you have the iconv() function and it works. */ -#undef HAVE_ICONV - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if your system has a GNU libc compatible `malloc' function, and - to 0 otherwise. */ -#undef HAVE_MALLOC - -/* Define to 1 if you have the header file. */ -#undef HAVE_MALLOC_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the `mkdir' function. */ -#undef HAVE_MKDIR - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the `strcasecmp' function. */ -#undef HAVE_STRCASECMP - -/* Define to 1 if you have the `strchr' function. */ -#undef HAVE_STRCHR - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the `strncasecmp' function. */ -#undef HAVE_STRNCASECMP - -/* Define to 1 if you have the `strstr' function. */ -#undef HAVE_STRSTR - -/* Define to 1 if you have the `strtol' function. */ -#undef HAVE_STRTOL - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_IOCTL_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Version number of package */ -#undef VERSION - -/* Define to empty if `const' does not conform to ANSI C. */ -#undef const - -/* Define to rpl_malloc if the replacement function should be used. */ -#undef malloc - -/* Define to `int' if does not define. */ -#undef pid_t - -/* Define to `unsigned int' if does not define. */ -#undef size_t diff -Nru tilda-1.5.2/TODO.md tilda-1.5.4/TODO.md --- tilda-1.5.2/TODO.md 1970-01-01 00:00:00.000000000 +0000 +++ tilda-1.5.4/TODO.md 2020-12-24 10:31:23.000000000 +0000 @@ -0,0 +1,45 @@ +# Feature Requests / Improvements + + * Dragable bar at the bottom to change Tilda's height + * Ability to disable keyboard accelerators (close tab, new tab, etc) + * Session support, so Tilda will load with the same number of tabs that it had + upon closing. + * Ability to rename a tab manually + +# Future Plans + + * DBus-ize Tilda + This will make Tilda more of a long-running daemon than a terminal. What I + envision is one Tilda process per user, with one config file, managing all of + the Tilda windows (individual terminals) that the user wants. Also, expose all + of the terminal's properties over DBus, so a completely seperate config + program can be written. Also, things like "open a new tab in terminal 3, and + launch XYZ in it" should be possible, and easy. + + Unfortunately, to support this, I am thinking about moving away from + libConfuse, and moving to the built-in GLib key-value parser (INI-like). This + should allow a config file like: + + [global] + setting1 = value1 + setting2 = value2 + + [terminal1] + setting1 = value3 + + Which means (to me) that all terminals should have the settings from the + global section, but terminal1 will have setting1 overridden to a different + value. This could be used to give different backgrounds or different fonts + in each terminal, for example, but keep all other properties the same. + + Of course, the DBus stuff should probably be optional, so that you don't have + to have it installed, nor running. You should be able to start a Tilda which + is configured with DBus, but not have DBus running. It would be nice if Tilda + didn't die when DBus dies out from under us. + +# Possible Translation Problems + +Change "Animation Delay" to "Animation Duration" +"Notebook" should be changed to "Window", probably +"tab_pos" error msg (in a switch stmt) should be changed. +