--- amanda-3.2.1.orig/server-src/diskfile.h
+++ amanda-3.2.1/server-src/diskfile.h
@@ -110,7 +110,7 @@
char *clnt_decrypt_opt; /* client-side decryption option parameter to use */
double comprate[2]; /* default compression rates */
/* flag options */
- int record; /* record dump in /etc/dumpdates ? */
+ int record; /* record dump in /var/lib/dumpdates ? */
int skip_incr; /* incs done externally ? */
int skip_full; /* fulls done externally ? */
int to_holdingdisk; /* use holding disk ? */
--- amanda-3.2.1.orig/client-src/selfcheck.c
+++ amanda-3.2.1/client-src/selfcheck.c
@@ -1124,8 +1124,8 @@
check_file(COMPRESS_PATH, X_OK);
if (need_dump || need_xfsdump ) {
- if (check_file_exist("/etc/dumpdates")) {
- check_file("/etc/dumpdates",
+ if (check_file_exist("/var/lib/dumpdates")) {
+ check_file("/var/lib/dumpdates",
#ifdef USE_RUNDUMP
F_OK
#else
@@ -1135,15 +1135,15 @@
} else {
#ifndef USE_RUNDUMP
if (access("/etc", R_OK|W_OK) == -1) {
- g_printf(_("ERROR [dump will not be able to create the /etc/dumpdates file: %s]\n"), strerror(errno));
+ g_printf(_("ERROR [dump will not be able to create the /var/lib/dumpdates file: %s]\n"), strerror(errno));
}
#endif
}
}
if (need_vdump) {
- if (check_file_exist("/etc/vdumpdates")) {
- check_file("/etc/vdumpdates", F_OK);
+ if (check_file_exist("/var/lib/vdumpdates")) {
+ check_file("/var/lib/vdumpdates", F_OK);
}
}
@@ -1155,6 +1155,7 @@
check_space(AMANDA_DBGDIR, (off_t)64); /* for amandad i/o */
#endif
+ check_space("/var/lib", (off_t)64); /* for /var/lib/dumpdates writing */
check_space("/etc", (off_t)64); /* for /etc/dumpdates writing */
}
}
--- amanda-3.2.1.orig/client-src/amandates.c
+++ amanda-3.2.1/client-src/amandates.c
@@ -26,7 +26,7 @@
/*
* $Id: amandates.c,v 1.21 2006/07/25 18:35:21 martinea Exp $
*
- * manage amandates file, that mimics /etc/dumpdates, but stores
+ * manage amandates file, that mimics /var/lib/dumpdates, but stores
* GNUTAR dates
*/
@@ -314,7 +314,7 @@
devname = amname_to_devname(amdp->name);
- if((dumpdf = fopen("/etc/dumpdates", "r")) == NULL) {
+ if((dumpdf = fopen("/var/lib/dumpdates", "r")) == NULL) {
amfree(devname);
return;
}
--- amanda-3.2.1.orig/example/amanda.conf.in
+++ amanda-3.2.1/example/amanda.conf.in
@@ -460,7 +460,7 @@
# program - specify the dump system to use. Valid values are "DUMP",
# or "GNUTAR". Default: [program "DUMP"].
# record - record the backup in the time-stamp-database of the backup
-# program (e.g. /etc/dumpdates for DUMP or
+# program (e.g. /var/lib/dumpdates for DUMP or
# @GNUTAR_LISTED_INCREMENTAL_DIRX@ for GNUTAR.).
# Default: [record yes]
# skip-full - skip the disk when a level 0 is due, to allow full backups
@@ -622,7 +622,7 @@
define dumptype nocomp-test {
global
- comment "test dump without compression, no /etc/dumpdates recording"
+ comment "test dump without compression, no /var/lib/dumpdates recording"
compress none
record no
priority medium
@@ -630,7 +630,7 @@
define dumptype comp-test {
nocomp-test
- comment "test dump with compression, no /etc/dumpdates recording"
+ comment "test dump with compression, no /var/lib/dumpdates recording"
compress client fast
}
--- amanda-3.2.1.orig/example/template.d/dumptypes
+++ amanda-3.2.1/example/template.d/dumptypes
@@ -106,7 +106,7 @@
# program - specify the dump system to use. Valid values are "DUMP"
# "STAR" and "GNUTAR". Default: [program "DUMP"].
# record - record the backup in the time-stamp-database of the backup
-# program (e.g. /etc/dumpdates for DUMP or
+# program (e.g. /var/lib/dumpdates for DUMP or
# /var/lib/amanda/gnutar-lists for GNUTAR.).
# Default: [record yes]
# skip-full - skip the disk when a level 0 is due, to allow full backups
@@ -302,7 +302,7 @@
define dumptype nocomp-test {
global
- comment "test dump without compression, no /etc/dumpdates recording"
+ comment "test dump without compression, no /var/lib/dumpdates recording"
compress none
record no
priority medium
@@ -310,7 +310,7 @@
define dumptype comp-test {
nocomp-test
- comment "test dump with compression, no /etc/dumpdates recording"
+ comment "test dump with compression, no /var/lib/dumpdates recording"
compress client fast
}
--- amanda-3.2.1.orig/man/disklist.5
+++ amanda-3.2.1/man/disklist.5
@@ -89,7 +89,7 @@
\fBamanda\&.conf\fR
file\&.
\fIDumptype\fRs specify backup related parameters, such as whether to compress the backups, whether to record backup results in
-/etc/dumpdates, the disk\'s relative priority, etc\&.
+/var/lib/dumpdates, the disk\'s relative priority, etc\&.
.RE
.PP
\fIspindle\fR
--- amanda-3.2.1.orig/man/amanda.conf.5
+++ amanda-3.2.1/man/amanda.conf.5
@@ -1619,8 +1619,8 @@
\fBrecord\fR \fIboolean\fR
.RS 4
Default:
-\fByes\fR\&. Whether to ask the backup program to update its database (e\&.g\&.
-/etc/dumpdates
+\fIyes\fR\&. Whether to ask the backup program to update its database (e\&.g\&.
+/var/lib/dumpdates
for DUMP or
/usr/local/var/amanda/gnutar\-lists
for GNUTAR) of time stamps\&. This is normally enabled for daily backups and turned off for periodic archival runs\&.
--- amanda-3.2.1.orig/man/entities/global.entities.in
+++ amanda-3.2.1/man/entities/global.entities.in
@@ -98,7 +98,7 @@
'>
-/etc/dumpdates'>
+/var/lib/dumpdates'>
amadmin'>
--- amanda-3.2.1.orig/man/xml-source/disklist.5.xml
+++ amanda-3.2.1/man/xml-source/disklist.5.xml
@@ -112,7 +112,7 @@
specify backup related parameters,
such as whether to compress the backups,
whether to record backup results in
-/etc/dumpdates, the disk's relative priority, etc.
+/var/lib/dumpdates, the disk's relative priority, etc.
--- amanda-3.2.1.orig/man/xml-source/amanda.conf.5.xml
+++ amanda-3.2.1/man/xml-source/amanda.conf.5.xml
@@ -2094,8 +2094,8 @@
record boolean
Default:
-yes.
-Whether to ask the backup program to update its database (e.g. /etc/dumpdates
+yes.
+Whether to ask the backup program to update its database (e.g. /var/lib/dumpdates
for DUMP or /usr/local/var/amanda/gnutar-lists for GNUTAR) of time stamps.
This is normally enabled for daily backups and turned off for periodic archival runs.
--- amanda-3.2.1.orig/debian/changelog
+++ amanda-3.2.1/debian/changelog
@@ -0,0 +1,788 @@
+amanda (1:3.2.1-1build1) oneiric; urgency=low
+
+ * Rebuild for Perl 5.12.
+
+ -- Colin Watson Sat, 07 May 2011 10:41:03 +0100
+
+amanda (1:3.2.1-1) unstable; urgency=low
+
+ * new upstream version, closes: #613178
+ * enable support for Amazon S3 storage on request from Christopher McCrory
+ * fix for dh_perl usage to include private library, closes: #582220
+ * merge updated Vietnamese debconf translation, closes: #601919
+ * merge updated Danish debconf translation, closes: #608435
+ * merge updated Arabic debconf translation, closes: #596178
+
+ -- Bdale Garbee Sun, 27 Feb 2011 11:54:58 -0700
+
+amanda (1:3.2.0-1) unstable; urgency=low
+
+ * new upstream version
+
+ -- Bdale Garbee Wed, 01 Dec 2010 20:39:49 -0700
+
+amanda (1:3.1.0-1) unstable; urgency=low
+
+ * new upstream version
+
+ -- Bdale Garbee Mon, 14 Jun 2010 13:46:03 -0600
+
+amanda (1:2.6.1p2-2) unstable; urgency=low
+
+ * add build depend on procps, closes: #552390
+ * add dh_perl call to rules and ${perl:Depends} to amanda-common deps so
+ that we comply with Perl policy, closes: #582220
+
+ -- Bdale Garbee Mon, 14 Jun 2010 10:21:11 -0600
+
+amanda (1:2.6.1p2-1) unstable; urgency=low
+
+ * new upstream version
+ * move more files out of amanda-common that really belong elsewhere
+ * deliver /usr/lib/amanda/application/am[gs]tar setuid, closes: #558094
+ * leave user backup groups alone on purge, closes: #572933
+
+ -- Bdale Garbee Mon, 15 Mar 2010 15:23:20 -0600
+
+amanda (1:2.6.1p1-2) unstable; urgency=low
+
+ * calcsize needs to be setuid, closes: #551156
+ * patch from upstream to fix init of xml_app.result in diskfile.c,
+ closes: #550098
+ * add note to server package README.Debian regarding mtio operations that
+ take too long putting noise in dmesg, closes: #506397
+ * merge Finnish translation of the debconf templates, closes: #535214
+
+ -- Bdale Garbee Fri, 16 Oct 2009 02:10:52 -0600
+
+amanda (1:2.6.1p1-1) unstable; urgency=low
+
+ * new upstream version, closes: #527090, #527489, #486405, #488713
+ * tweak configure to ensure ssh support is enabled, closes: #524618, #492352
+ * update debian/control to include my git packaging repo location
+ * resolve possible bashisms, closes: #530041
+
+ -- Bdale Garbee Tue, 08 Sep 2009 11:40:42 -0600
+
+amanda (1:2.5.2p1-5) unstable; urgency=low
+
+ * add --without-ipv6 as a short-term fix for amdump connectivity problems,
+ closes: #482754, #501281, #470202
+
+ -- Bdale Garbee Thu, 26 Mar 2009 22:52:51 -0600
+
+amanda (1:2.5.2p1-4) unstable; urgency=high
+
+ * high priority bug fixes intended for lenny release
+ * update version thresholds in Replaces to ease upgrades, closes: #476583
+ * don't set maxdumpsize in the default amanda.conf, closes: #475524
+ * freshen to latest standards version
+ * revert chg-multi.sh.in and patch since the new version previously pulled
+ in caused more problems than it solved, closes: #486384
+ * undo traps on amverify exit to prevent double reports, closes: #487405
+ * correct paths in amcrypt-ossl-asym(8) xml source, closes: #486739
+
+ -- Bdale Garbee Sat, 16 Aug 2008 16:03:27 -0300
+
+amanda (1:2.5.2p1-3) unstable; urgency=low
+
+ * fix "bashisms" in the amcleanup and amverify scripts. closes: #464489
+ * merge updated Russian translation, closes: #471030
+ * move example configuration 'DailySet1' from /etc/amanda to
+ /usr/share/doc/amanda-server/examples to reduce confusion, update
+ the amanda-server README.Debian with fresh install notes. closes: #420023
+ * move some binaries out of amanda-common into -server and -client
+ * harden forcing of /usr/bin/mail instead of /usr/bin/Mail, closes: #475771
+
+ -- Bdale Garbee Wed, 16 Apr 2008 00:02:13 -0600
+
+amanda (1:2.5.2p1-2) unstable; urgency=low
+
+ * document holding disk constraint in amanda-server README.Debian file,
+ closes: #465746
+ * patch from Wolfgang Weisselberg for a problem in amstatus, closes: #471240
+ * enable both with-bsdtcp-security and with-bsdudp-security in configure,
+ perhaps that will help resolve some of the problems users are having
+ with 2.5.2?
+
+ -- Bdale Garbee Thu, 20 Mar 2008 18:06:58 -0600
+
+amanda (1:2.5.2p1-1) unstable; urgency=low
+
+ * new upstream version, closes: #434607, #434606
+ * pull fresher chg-multi.sh.in from upstream to fix syntax error
+ * drop reference to non-existent 'taper' package in control, closes: #444330
+ * a number of tweaks to address issues found by lintian
+ * incorporate Galician translation, closes: #414113
+
+ -- Bdale Garbee Sun, 07 Oct 2007 18:39:45 -0600
+
+amanda (1:2.5.1p3-3) unstable; urgency=low
+
+ * fix amcrypt-ossl and amcryopt-ossl-asym to use the right username for
+ Debian systems, closes: #417818
+ * patch from upstream for problem in get_fs_stats(), closes: #420100
+ * patch from upstream for problem in sendsize.c, closes: #420076
+ * replace netbase dependency with update-inetd
+
+ -- Bdale Garbee Tue, 15 May 2007 11:44:34 -0600
+
+amanda (1:2.5.1p3-2) unstable; urgency=low
+
+ * fold in diff from NMU of 1:2.5.1p1-2.1 by Peter Palfrader, closes: #399790
+ Do not fail postrm when removing the backup user from either
+ group disk or tape does not succeed. Also, try this only
+ when the backup user is in those groups to begin with. Also
+ handles the case of deluser not existing anymore.
+ Based in parts on the patch provided by Andreas Henriksson and
+ the cupsys postinst script.
+ * remove useless redundant clause in postrm, closes: #411739
+
+ -- Bdale Garbee Wed, 21 Feb 2007 04:22:49 +0900
+
+amanda (1:2.5.1p3-1) unstable; urgency=low
+
+ * new upstream version, closes: #402221
+ * merge updated es.po, closes: #409316
+ * merge updated pt.po, closes: #409697
+ * fix for segfault in amfetchdump, closes: #411470
+ * update inetd and xinetd configs for new security model, closes: #402215
+
+ -- Bdale Garbee Tue, 20 Feb 2007 13:05:28 +0900
+
+amanda (1:2.5.1p1-2) unstable; urgency=medium
+
+ * fix broken way of setting default CLN_AMANDATES in client-src/clientconf.c
+ so that the file ends up where we expect it, closes: #394796
+ * make this medium priority because of the amandates location problem
+ * updated German translation, closes: #396029
+
+ -- Bdale Garbee Sun, 29 Oct 2006 11:24:39 -0700
+
+amanda (1:2.5.1p1-1) unstable; urgency=low
+
+ * new upstream version, closes: #395319
+
+ -- Bdale Garbee Thu, 26 Oct 2006 15:29:08 -0600
+
+amanda (1:2.5.1-1) unstable; urgency=low
+
+ * new upstream version, closes: #361716
+ * incorporate patch from NMU by Martin Krafft based on a suggestion by
+ Bill Alombert (thanks!), accounting for the fact that we now deliver
+ content in amanda-common that used to be in amanda-client, closes: #391026
+ * updated ja.po from Hideki Yamane, closes: #392153
+ * change debconf notification about old/rare conflict with amandadates file
+ to be of type 'error' instead of 'note', closes: #388707
+ * add --with-ssh-security to configure and note issue with suid of dumper
+ to README.Debian, closes: #365306
+
+ -- Bdale Garbee Wed, 18 Oct 2006 01:02:23 -0600
+
+amanda (1:2.5.0p2-2) unstable; urgency=low
+
+ * merge updated French translation, closes: #369243
+ * merge updated Italian translation, closes: #369588
+ * merge updated Czech translaterion, closes: #370299
+ * merge updated Dutch translaterion, closes: #374850
+ * merge updated Swedish translaterion, closes: #375747
+ * rework postinst to use adduser instead of usermod to add user backup to
+ groups disk and tape, and add postrm support for removing user backup from
+ those groups on purge, closes: #380336
+ * patch from upstream 2.5.1b1 via Geert Uytterhoeven to support tar 1.15.91,
+ closes: #378558
+ * accept patch from Raphael Pinson adding xinetd support
+ * Clean debian/po/templates.pot after build
+
+ -- Bdale Garbee Mon, 28 Aug 2006 09:15:23 -0400
+
+amanda (1:2.5.0p2-1) unstable; urgency=low
+
+ * new upstream version
+ * freshen delivered default amanda.conf, closes: #359036
+
+ -- Bdale Garbee Thu, 25 May 2006 22:59:16 -0600
+
+amanda (1:2.5.0-2) unstable; urgency=low
+
+ * tighten amandahosts permissions to user-only in the amanda-common postinst
+
+ -- Bdale Garbee Mon, 3 Apr 2006 05:03:29 -0700
+
+amanda (1:2.5.0-1) unstable; urgency=low
+
+ * new upstream version, closes: #360085
+ * add --with-maxtapeblocksize=256 to configure, to better support LTO-3
+ tapes like the HP Ultrium 960
+ * tweak packaging to handle changes in upstream makefiles, etc
+ * fix overlong line in amrestore man page synopsys
+ * move private shlibs to the amanda-common package to simplify deps
+
+ -- Bdale Garbee Mon, 3 Apr 2006 00:28:17 -0700
+
+amanda (1:2.4.5p1-2) unstable; urgency=low
+
+ * now that we're using it for debugging info, make sure /var/log/amanda
+ exists in the amanda-common postinst
+
+ -- Bdale Garbee Thu, 29 Dec 2005 11:57:11 -0700
+
+amanda (1:2.4.5p1-1) unstable; urgency=low
+
+ * new upstream version
+ * add --with-debugging=/var/log/amanda to avoid potentially insecure use
+ of /tmp, closes: #226139
+ * fix typo in chg-null.sh.in causing it to not use AMANDA_DBGDIR definition
+ * patch chg-null.sh.in to use defined value of tapedev, closes: #219656
+ * patch from Jan Nordholz to fix off-by-one error, closes: #339588
+ * fix misleading usage example in amtoc man page, closes: #297690
+ * add a note to amanda-server's README.Debian about how to keep missing
+ exclude files from making tar not work, closes: #168229, #185312, #186285
+ * fix bogus reported sizes when using dump caused by assuming dump is
+ reporting 512 byte instead of 1k blocks, closes: #234173
+ Debian reports results in 1k, not 512-byte blocks,
+ * remove globbing example from amanda man page that is hopelessly broken
+ and generating man errors
+
+ -- Bdale Garbee Thu, 29 Dec 2005 01:36:23 -0700
+
+amanda (1:2.4.5-2) unstable; urgency=low
+
+ * merge Arabic translation, closes: #320759
+ * merge Vietnamese translation, closes: #307735
+ * allow debconf-2.0 as a dependency alternative
+ * update dependencies in light of libreadline5-dev, closes: #326390
+ * don't blindly remove non-conffiles in /etc/amanda, closes: #282772
+ * fix strange dump results with smbclient 3.0, closes: #226798, #313553
+ * pass --numeric-owner to tar from sendsize to improve estimation speed
+ on systems using mixed libnss modules, closes: #247661
+ * have amanda-common postinst add /usr/sbin to backup user's path,
+ closes: #74045
+
+ -- Bdale Garbee Wed, 28 Sep 2005 00:16:44 -0600
+
+amanda (1:2.4.5-1) unstable; urgency=low
+
+ * new upstream version, closes: #299586, #308559
+
+ -- Bdale Garbee Fri, 3 Jun 2005 09:02:42 -0600
+
+amanda (1:2.4.4p3-3) unstable; urgency=low
+
+ * use /usr/bin/mail instead of /usr/bin/Mail, closes: #296022
+ * incorporate Czech translation from Miroslav Kure, closes: #297596
+
+ -- Bdale Garbee Sun, 29 May 2005 17:02:16 +0200
+
+amanda (1:2.4.4p3-2) unstable; urgency=low
+
+ * add killpgrp to the set of setuid root:backup executables in the
+ amanda-client package, closes: #266520
+
+ -- Bdale Garbee Wed, 18 Aug 2004 12:55:21 -0600
+
+amanda (1:2.4.4p3-1) unstable; urgency=low
+
+ * new upstream version
+ * incorporate nl.po from Luk Claes, closes: #240071
+ * incorporate it.po from Luca Monducci, closes: #249171
+
+ -- Bdale Garbee Sat, 24 Jul 2004 00:17:50 -0600
+
+amanda (1:2.4.4p2-2) unstable; urgency=high
+
+ * don't assume /var/backups is owned by user backup in the postinst,
+ closes: #238069, #218135
+ * fix README.Debian pathnames in descriptions, closes: #225849, #225856
+ * include Japanese debconf translation, closes: #235321
+ * include upstream changelog in amanda-common, closes: #227033
+
+ -- Bdale Garbee Sun, 14 Mar 2004 23:35:13 -0700
+
+amanda (1:2.4.4p2-1) unstable; urgency=low
+
+ * new upstream version, closes: #228697
+
+ -- Bdale Garbee Sun, 15 Feb 2004 19:38:11 -0700
+
+amanda (1:2.4.4p1-2) unstable; urgency=low
+
+ * patch to fix problem using samba3, closes: #214845
+ * add AUTHORS, NEWS, and README to the set of docs delivered, closes: #81068
+ * add a note to the amanda-server README.Debian regarding the interaction
+ with bastille's 'restrict system resources' option, closes: #118616
+ * add a note to the amanda-server README.Debian regarding the concerns
+ about the reliability of 'dump', closes: #198060
+ * though amverify now exits instead of hanging if mt is not present, make
+ amanda-server suggest cpio|mt-st to get an mt anyway, closes: #155181
+ * apply patch for chg-scsi.c from Chirik to make emubarcode option work,
+ closes: #214519
+ * include pt.po from Bruno Rodrigues, closes: #216390
+
+ -- Bdale Garbee Fri, 24 Oct 2003 01:49:29 -0600
+
+amanda (1:2.4.4p1-1) unstable; urgency=low
+
+ * new upstream version, closes: #210324
+ * make rundump setuid like runtar, closes: #193982
+ * switch to gettext-based debconf templates, closes: #198101
+ * stop forcing ownership of ~backup to avoid security issues posed by other
+ packages writing there as root, closes: #198944
+ * limit port ranges to ease use with firewalls, semi-arbitrarily picking
+ ranges TCP 50000-50100 and UDP 840-860, closes: #65109, #89432, #111882
+ * remove ~backup/.amandahosts symlink in postrm on purge, closes: #198949
+
+ -- Bdale Garbee Sun, 14 Sep 2003 23:21:00 -0600
+
+amanda (1:2.4.4-2) unstable; urgency=low
+
+ * mark amanda-server as replacing files in older amanda-common to ease
+ upgrading, closes: #190185, #191626
+
+ -- Bdale Garbee Fri, 2 May 2003 10:50:44 -0600
+
+amanda (1:2.4.4-1) unstable; urgency=low
+
+ * new upstream version, closes: #169634, #182397, #182882
+ * updates the README.Debian files, closes: #189228, #189229
+ * change mailx from suggests to depends, closes: #187283
+ * correct instructions in amanda-client's README.Debian, closes: #180179
+ * patch from Brad Roberts, also submitted upstream, that fixes problems
+ with amflush sometimes ending up in an infinite loop inside the libc
+ memory allocation code, closes: #169537
+ * merge Danish templates translation, closes: #174740
+ * update chg-zd-mtx to include definition of cleancycle, the code using it
+ is already fixed in 2.4.3, closes: #169634
+ * remove explicit suggests on awk, since some flavor of awk is essential
+ * add lintian overrides files to squelch noise about conscious decisions
+
+ -- Bdale Garbee Sun, 20 Apr 2003 01:14:33 -0600
+
+amanda (1:2.4.3-1) unstable; urgency=low
+
+ * new upstream version, closes: #127801, #163844, #167021, #165522, #127801
+ * this version does not hard-code the sed path, closes: #161850, #151962
+ * have clean target in rules file update config.sub/guess
+ * clean up postinst files to only call ldconfig when configuring
+ * move to newer debhelper compatibility mode
+ * fix typo in postinst creation of group tape, closes: #165640
+ * enable support for XFS filesystems by adding xfsdump to the list of
+ required build dependencies, closes: #143913, #110731
+
+ -- Bdale Garbee Wed, 6 Nov 2002 02:39:58 -0700
+
+amanda (1:2.4.2p2-4) unstable; urgency=low
+
+ * add mtx to the list of build dependencies so support for it gets included
+ * merge chg-zd-mtx.sh.in from 2.5.0 CVS, since it actually works with our
+ current mtx, closes: #136571
+ * merge french templates translation, closes: #138521
+ * merge russian templates translation, closes: #137616
+ * switch to unmerged templates files in the source package
+
+ -- Bdale Garbee Tue, 2 Apr 2002 00:43:13 -0700
+
+amanda (1:2.4.2p2-3) unstable; urgency=medium
+
+ * solve problem reported as bug 112691 a different way, to back out the
+ change made for -2 that had disasterous side-effects... instead of messing
+ with configure options, just eliminate chg-mtx since it's not useful and
+ the mtx package provides mtx-changer which works.
+ Closes: #119495, #119546, #119352, #119361, #119549, #119665
+ * add lpr to build dependencies, closes: #119399, #108607
+ * change the fix for duplicate dependencies on amanda-common so that it's
+ the versioned flavor we preserve, so all the pieces stay in sync
+
+ -- Bdale Garbee Wed, 14 Nov 2001 21:41:11 -0700
+
+amanda (1:2.4.2p2-2) unstable; urgency=medium
+
+ * add configure option to keep chg-mtx, et al, from writing to files in
+ in /tmp insecurely, closes: #112691
+ * merge in -pt_BR template translation, closes: #106129
+ * fix duplicate dependencies on amanda-common, closes: #118639, #118642
+
+ -- Bdale Garbee Fri, 9 Nov 2001 10:30:27 -0700
+
+amanda (1:2.4.2p2-1) unstable; urgency=low
+
+ * new upstream version, closes: #93449
+ * freshen config.sub/guess again
+ * fix problem with tapetype install using wrong libtool, closes: #104772
+ * various minor cleanups in the rules file to reduce warnings
+
+ -- Bdale Garbee Thu, 19 Jul 2001 23:26:33 -0600
+
+amanda (1:2.4.2-6) unstable; urgency=low
+
+ * freshen config.sub/guess for ia64 and hppa, closes: #90182
+ * amanda tests for -E or -S for estimates from dump during configure, and
+ is selecting -S now with the dump in sid. The latest amanda and latest
+ dump therefore should work fine together, closes: #91859
+ * update build-depends from perl5 to perl
+
+ -- Bdale Garbee Wed, 4 Apr 2001 15:43:52 -0600
+
+amanda (1:2.4.2-5) unstable; urgency=low
+
+ * add an explicit dependency in the rules file on /usr/bin/smbclient, since
+ the Build-Depends: line in the control file isn't checked automatically,
+ and the configure will happily build amanda without smbclient support if
+ it isn't installed... which is *not* what we want! closes: #85965
+
+ -- Bdale Garbee Wed, 14 Feb 2001 11:33:06 -0700
+
+amanda (1:2.4.2-4) unstable; urgency=low
+
+ * lose the ftape-util build dependency, nobody wanted it and it's causing
+ various problems. closes: #85516, #85708
+
+ -- Bdale Garbee Mon, 12 Feb 2001 21:54:31 -0700
+
+amanda (1:2.4.2-3) unstable; urgency=low
+
+ * lose the dh_suidregister calls, since it's obsolete, closes: #85334
+ * add build-depend on ftape-util so that configure will find and know how to
+ use that technology, even though nobody has ever actually asked me about
+ it who wanted to use it... closes: #83287
+ * fold in contributed template translations, closes: #83479, #84839, #84867
+ * if ~backup/.amandahosts isn't a link, use 'su -c backup' when creating it
+ to be compatible with NFS-mounted home directories. It would be cleaner,
+ of course, to train Amanda to use the real file which I now place in /etc
+ directly, but that can wait for another day. closes: #83554
+
+ -- Bdale Garbee Fri, 9 Feb 2001 11:42:31 -0700
+
+amanda (1:2.4.2-2) unstable; urgency=low
+
+ * make sure /etc/amandahosts has correct owner/group/perms in postinst,
+ closes: #80941
+ * update dependency information since some files moved from amanda-common
+ to amanda-client, so that upgrades go smoothly. also, make the client
+ and server packages have a versioned depend on the common package to avoid
+ potential problems.
+ * problem with visible control chars in amverify confirmed to have been
+ fixed upstream in the 2.4.2 version, closes: #65537
+
+ -- Bdale Garbee Sun, 31 Dec 2000 21:49:16 -0700
+
+amanda (1:2.4.2-1) unstable; urgency=low
+
+ * new upstream version, closes: #76632, #78040, #79500
+ * fold in debconf support patch from shaleh
+ * make sure all build dependencies are present, closes: #67008
+ * move canonical location of amandahosts file to /etc, moving existing file
+ there if necessary, and using a symlink in ~backup. This allows treatment
+ as a conffile. Closes: #52357
+ * upstream implemented a general Y2K amoverview fix, closes: #64780
+ * chg-scsi is delivered in amanda-server 2.4.2, closes: #41420
+
+ -- Bdale Garbee Tue, 26 Dec 2000 23:25:22 -0700
+
+amanda (1:2.4.1p1-12) frozen unstable; urgency=low
+
+ * revert amplot/Makefile.in to upstream version to dodge issues created
+ by newer automake version. Note that items in the build depends
+ list in the control file *must* be available or the package build will
+ fail, as some executables won't be generated if configure doesn't find
+ everything it wants! Closes: #64864, marked as grave for potato.
+
+ -- Bdale Garbee Sun, 11 Jun 2000 09:53:35 -0600
+
+amanda (1:2.4.1p1-11) frozen unstable; urgency=low
+
+ * target frozen because I think the spurious failure messages and duplicated
+ dependencies are worth fixing for potato even though both were filed as
+ "normal" bugs
+ * add extra cases to amanda-client's filtering of tar output to eliminate
+ user concern and confusion from spurious "FAILED DUMP" messages,
+ closes: #60126
+ * be more careful about which -dev packages are on build machine so that
+ we only depend on one version of libreadline, closes: #57940
+
+ -- Bdale Garbee Sun, 12 Mar 2000 22:31:39 -0700
+
+amanda (1:2.4.1p1-10) unstable; urgency=low
+
+ * fix postinst bug in amanda-server that breaks inetd.conf that was
+ introduced during cut'n'paste for -8, closes: #52332
+ * the amanda-server package depends on mailx because the upstream source
+ looks for mailx at configure time, embeds the path, and uses it to send
+ mail. The dependency on mailx is not arbitrary. Closes: #44034
+ * add mailx to the Build-Depends so configure can find it
+ * update path reference to GPL in copyright file for FHS
+
+ -- Bdale Garbee Fri, 7 Jan 2000 01:39:14 -0700
+
+amanda (1:2.4.1p1-9) unstable; urgency=low
+
+ * missed a few things in Build-Depends, fill them in
+
+ -- Bdale Garbee Sun, 5 Dec 1999 15:15:33 -0700
+
+amanda (1:2.4.1p1-8) unstable; urgency=low
+
+ * supply the real tapetype, not just libtool wrapper. closes: #50585, #50280
+ * update control to include Build-Depends:, remove README.source-depends
+ * move the inetd entry handling from amanda-common postinst/prerm to the
+ amanda-server package, since they're only relevant there, closes: #49578
+
+ -- Bdale Garbee Sat, 27 Nov 1999 17:39:13 -0700
+
+amanda (1:2.4.1p1-7) unstable; urgency=low
+
+ * recompile to include smbclient support
+
+ -- Bdale Garbee Sun, 7 Nov 1999 14:13:24 -0700
+
+amanda (1:2.4.1p1-6) unstable; urgency=low
+
+ * apply patches from Amanda patch page for glibc21, glibc22, and samba2.
+ Closes: #42771, #44672
+ * real fix for self-referential dependencies, closes: #46362
+ * the amrecover behavior reported was a 2.4.0 issue, closes: #27709
+ * "fix" bash-ism in the rules file, closes: #45236
+ * provide tapetype in amanda-server, closes: #42825
+ * FHS compliance, lintian clean
+ * thanks to Ben Kochie for reviewing open bugs for this update
+
+ -- Bdale Garbee Fri, 5 Nov 1999 20:22:00 -0700
+
+amanda (1:2.4.1p1-5) unstable; urgency=low
+
+ * update perl dependency to perl5 as per new perl policy
+
+ -- Bdale Garbee Sun, 11 Jul 1999 11:37:32 -0600
+
+amanda (1:2.4.1p1-4) unstable; urgency=low
+
+ * fix dependencies for amanda-common in control, closes 38464
+
+ -- Bdale Garbee Sun, 30 May 1999 23:37:55 -0600
+
+amanda (1:2.4.1p1-3) unstable; urgency=low
+
+ * depend on mailx, closes 34894
+ * lose the -DENABLE_GNUTAR_ATIME_PRESERVE, since it eliminates the ability
+ to use tar for incremental backups, closes 36639
+
+ -- Bdale Garbee Mon, 24 May 1999 23:57:25 -0600
+
+amanda (1:2.4.1p1-2) unstable; urgency=low
+
+ * replace /var/state usage with /var/lib/amanda, since user backup can't
+ write to /var/state
+ * stop calling automake/autoconf explicitly in the rules file, since it
+ appears that automake 1.4 breaks amanda, while 1.3 was ok. It should be
+ ok to just use the provided configure, closes 32143
+
+ -- Bdale Garbee Tue, 19 Jan 1999 21:21:18 -0700
+
+amanda (1:2.4.1p1-1) unstable; urgency=low
+
+ * new upstream version, closes 24855, 22270
+ * enable IGNORE_TAR_ERRORS and ENABLE_GNUTAR_ATIME_PRESERVE, closes 28486
+ * have the amanda-common postinst create /var/lib/amanda before it tries to
+ put a file there, closes 22345, 30326, 25106
+ * fix a few last references to /usr/adm, closes 25574
+ * update the docs for amanda-server to include a note about using ftape
+ from Jean Pierre LeJacq, closes 22271
+ * make the 'build-stamp' chunk of the rules file depend on /sbin/dump, since
+ amanda won't know about dump unless it can find it during the configure.
+ Another reason we need build-time dependencies, I guess. Closes 24369.
+ * fix chg-mtx.sh.in to reflect Debian mtx syntax, closes 26208
+ * add tapetype QIC-3080, closes 26569
+ * eliminate dh_du from the rules file
+ * various tweaks to resolve lintian complaints
+
+ -- Bdale Garbee Mon, 18 Jan 1999 22:58:34 -0700
+
+amanda (1:2.4.0-4) unstable; urgency=low
+
+ * add suggests dump to amanda-client, closes 24962
+
+ -- Bdale Garbee Mon, 3 Aug 1998 22:32:29 -0600
+
+amanda (1:2.4.0-3) frozen unstable; urgency=low
+
+ * be consistent about pointing to /var/lib/amanda/amandates, closes 21811.
+ * be consistent about supporting suidregister.
+ * make sure user backup's home directory exists before using it in the
+ amanda-common postinst, closes 21897.
+
+ -- Bdale Garbee Sun, 3 May 1998 20:48:38 -0600
+
+amanda (1:2.4.0-2) frozen unstable; urgency=low
+
+ * update amanda-common postinst to do a better job of making sure the
+ user 'backup' exists, and has the right group privs. Closes 18242,
+ 20675, and 20945
+ * update amanda-client README file to reflect automatic handling of user
+ backup, and to add information for users setting up to do indexing,
+ closes 21313
+ * improve documentation of server config issues in amanda-server README,
+ closes 21366
+ * update default amanda.conf to fix compression flags on comp-user-tar and
+ comp-root-tar, closes 21198
+ * fix typos in amanda-server's README file, closes 21118
+
+ -- Bdale Garbee Mon, 20 Apr 1998 02:14:50 -0600
+
+amanda (1:2.4.0-1) frozen unstable; urgency=high
+
+ * new upstream release, 2.4.0 is no longer beta...
+ * use an explicit epoch in the version since 2.4.0 < 2.4.0b6 ... sigh
+ * add --with-smbclient to configure run, and include more docs in
+ amanda-common, closes 18366
+ * clean up dependencies, closes 18746
+ * patch dh_movefiles from debhelper to move real files before symlinks when
+ processing wildcards, closes 19267... debhelper bug 18220 addresses this
+ issue.
+ * make better use of wildcards in debhelper control files, closes 18350
+ * fix spelling errors in control file, closes 18959
+ * have amanda-server suggest mailx, since amcheck optionally uses
+ /usr/bin/Mail to notify the operator of needed tapes, closes 18334
+ * improve the postinst slightly... the home directory for user backup needs
+ to be fixed in /etc/passwd before I can do the right things to close
+ 18242 completely. Bug filed against base-passwd, severity important.
+ * various small cleanups suggested to me via email without bugs filed
+
+ -- Bdale Garbee Mon, 30 Mar 1998 18:29:55 -0700
+
+amanda (2.4.0b6-12) unstable; urgency=low
+
+ * apply upstream patches to bring us to 2.4.0-980319
+ * fold in some of Heiko's improvements from his bo-unstable version
+
+ -- Bdale Garbee Tue, 24 Mar 1998 23:52:55 -0700
+
+amanda (2.4.0b6-11) unstable; urgency=low
+
+ * apply upstream patches to bring us to 2.4.0b6p4
+ * use appropriate wildcards in amanda-*.files control files. Closes 18196.
+ * include 'adduser' alternative in amanda-client's README, closes 18174.
+
+ -- Bdale Garbee Sun, 15 Feb 1998 12:54:46 -0700
+
+amanda (2.4.0b6-10) unstable; urgency=low
+
+ * apply upstream patches to bring us to 2.4.0b6p3
+
+ -- Bdale Garbee Sun, 8 Feb 1998 17:53:47 -0700
+
+amanda (2.4.0b6-9) unstable; urgency=low
+
+ * clean up dependencies, closes 17838
+ * apply upstream patches to bring us to 2.4.0b6p2
+ * switch to automake 1.2d from experimental on build machine, reduces
+ the amount of hackery required, and therefore the size of the diffs.
+
+ -- Bdale Garbee Thu, 5 Feb 1998 22:40:58 -0700
+
+amanda (2.4.0b6-8) unstable; urgency=low
+
+ * apply upstream patch to handle occasional divide by zero in amplot
+ * refine split of files between binary packages
+
+ -- Bdale Garbee Wed, 28 Jan 1998 14:33:30 -0700
+
+amanda (2.4.0b6-7) unstable; urgency=low
+
+ * patch for amrmtape from Heiko, will be in a future upstream release
+ * add suidmanager support to control files
+
+ -- Bdale Garbee Wed, 28 Jan 1998 14:33:30 -0700
+
+amanda (2.4.0b6-6) unstable; urgency=low
+
+ * clean up permissions... with --with-bsd-security enabled, some pieces must
+ be setuid in the server package
+ * fix client prerm so that it only removes the inetd.conf entry it owns.
+
+ -- Bdale Garbee Tue, 27 Jan 1998 14:44:30 -0700
+
+amanda (2.4.0b6-5) unstable; urgency=low
+
+ * enable use of .amandahosts instead of .rhosts for access control.
+ * change /etc/amandates location to /var/lib/amandates for FSSTND compliance.
+ * ensure /var/lib/amandates exists with correct perms in postinst.
+ * make the /var/lib/amanda-gnutar-lists directory have appropriate perms.
+ * update README files to reflect contemporary reality
+
+ -- Bdale Garbee Tue, 27 Jan 1998 10:04:58 -0700
+
+amanda (2.4.0b6-4) unstable; urgency=low
+
+ * oops... --with-bsd-security got dropped from the configure at some point,
+ add it back in. Thanks to Heiko again for pointing this out.
+
+ -- Bdale Garbee Mon, 26 Jan 1998 10:40:39 -0700
+
+amanda (2.4.0b6-3) unstable; urgency=low
+
+ * make amanda-common depend on tar >= 1.12. Thanks to Heiko Schlittermann
+ for pointing this out.
+
+ -- Bdale Garbee Mon, 26 Jan 1998 10:40:39 -0700
+
+amanda (2.4.0b6-2) unstable; urgency=low
+
+ * amanda-common was suggesting amanda or amanda-client, updated to reflect
+ replacement of 'amanda' with 'amanda-server'.
+
+ -- Bdale Garbee Mon, 26 Jan 1998 10:40:39 -0700
+
+amanda (2.4.0b6-1) unstable; urgency=low
+
+ * new maintainer
+ * new upstream release, reworked package for libc6, using debhelper
+ * incorporate amanda-common split suggested by Tom Lear's 2.4.0b4 package.
+ this replaces 'amanda' with 'amanda-server', and breaks out an
+ 'amanda-common' package to hold the libs and man pages that were formerly
+ conflicting between amanda and amanda-client. Closes bugs 11046, 11943.
+
+ -- Bdale Garbee Mon, 26 Jan 1998 09:15:05 -0700
+
+amanda (2.3.0.4-2.1) unstable; urgency=low
+
+ * non-maintainer release (never actually uploaded)
+ * libc6
+ * make amanda and amanda-client depend on netbase (>=3.03) for /etc/services
+ entries. Remove /etc/services mashing from postinst. Closes bugs 12847,
+ 12848, 13795.
+ * make amanda depend on amanda-client. This is the easiest way to resolve
+ the overlapping files problem. It makes the assumption that if you're
+ running an amanda server, you'll want the client stuff anyway so you can
+ back up the server. Since the client package is small, this seems like a
+ better resolution than splitting out a third "common" package. Closes
+ bugs 11046, 11943.
+ * update all references to /etc/amandates and /etc/dumpdates to use
+ /var/lib/*dates, ala current Debian dump package. Closes bug 15586.
+ * pre-apply all the patches from the upstream archive, to simplify the
+ build process. Patches applied include: arithexc.diff,exclude2.diff,
+ flushidx.diff,srvcomp.diff,tardates.diff,exclude.diff,exclude3.diff,
+ longopt.diff, and srvcomp2.diff. Closes bug 13151, 13796.
+ * convert rules file to use debhelper.
+
+ -- Bdale Garbee Sat, 10 Jan 1998 02:08:02 -0700
+
+amanda (2.3.0.4-2) unstable; urgency=low
+
+ * fixed dependencies for amanda-client
+
+ -- Christian Meder Wed, 18 Jun 1997 14:49:49 -0400
+
+amanda (2.3.0.4-1) unstable; urgency=low
+
+ * Initial Release.
+ * Split in client and server package
+ * wrote small READMEs to ease a quick start
+ * applied several patches from
+ http://www.cs.umd.edu/projects/amanda/patches.html to fix various
+ new features
+
+ -- Christian Meder Wed, 14 May 1997 13:08:34 -0500
+
+Local variables:
+mode: debian-changelog
+End:
--- amanda-3.2.1.orig/debian/crontab.amanda
+++ amanda-3.2.1/debian/crontab.amanda
@@ -0,0 +1,7 @@
+# This is an example for a crontab entry for automated backup with amanda
+# With these cron lines, Amanda will check that the correct tape is in
+# the drive every weekday afternoon at 4pm (if it isn't, all the
+# operators will get mail). At 12:45am that night the dumps will be run.
+0 16 * * 1-5 /usr/sbin/amcheck -m DailySet1
+45 0 * * 2-6 /usr/sbin/amdump DailySet1
+
--- amanda-3.2.1.orig/debian/rules
+++ amanda-3.2.1/debian/rules
@@ -0,0 +1,151 @@
+#!/usr/bin/make -f
+# debian/rules for amanda using debhelper
+# Copyright 1998-2009 by Bdale Garbee. License GPL v2
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+r=$(shell pwd)/debian/amanda-common
+s=$(shell pwd)/debian/amanda-server
+c=$(shell pwd)/debian/amanda-client
+
+configure: configure-stamp
+configure-stamp:
+ dh_testdir
+ # pick up latest config files provided by autotools-dev
+ cp -f /usr/share/misc/config.sub config/config.sub
+ cp -f /usr/share/misc/config.guess config/config.guess
+ # do we need --{htmldir,dvidir,pdfdir,psdir} to force subdirectories?
+ # should we re-craft this to use --without-server and --without-client,
+ # and lose the amanda-common package?
+ MAILER=/usr/bin/mail \
+ SSH=/usr/bin/ssh \
+ ./configure \
+ --prefix=/usr \
+ --bindir=/usr/sbin \
+ --libexecdir=/usr/lib/amanda \
+ --without-amlibexecdir \
+ --without-amperldir \
+ --sysconfdir=/etc \
+ --sharedstatedir=/var/lib \
+ --localstatedir=/var/lib \
+ --with-user=backup \
+ --with-group=backup \
+ --with-tcpportrange=50000,50100 \
+ --with-udpportrange=840,860 \
+ --with-debugging=/var/log/amanda \
+ --with-gnutar-listdir=/var/lib/amanda/gnutar-lists \
+ --with-index-server=localhost \
+ --with-bsd-security \
+ --with-smbclient=/usr/bin/smbclient \
+ --with-amandahosts \
+ --with-ssh-security \
+ --with-bsdtcp-security \
+ --with-bsdudp-security \
+ --without-ipv6 \
+ --enable-s3-device
+
+ touch missing
+ touch configure-stamp
+
+build: build-stamp
+build-stamp: configure-stamp
+ dh_testdir
+ MAILER=/usr/bin/mail $(MAKE) CFLAGS="-O2 -g -Wall \
+ -DAMANDATES_FILE='\"/var/lib/amanda/amandates\"' \
+ -DIGNORE_TAR_ERRORS "
+ touch build-stamp
+
+clean:
+ dh_testdir
+ dh_testroot
+ [ ! -f Makefile ] || make clean
+ [ ! -f Makefile ] || make distclean
+ -rm -f build-stamp configure-stamp missing config/config.h common-src/genversion
+ -find . -type d -name .deps -exec rm -rf {} \;
+ dh_clean
+
+# call this before packaging for upload when updating template English text
+updatepo:
+ -rm -f debian/po/templates.pot
+ debconf-updatepo
+
+binary-indep: build
+
+binary-arch: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs -a
+ make install DESTDIR=$(r)
+ install -m 644 debian/amandahosts $(r)/etc/amandahosts
+ dh_installdocs -a
+ dh_installexamples -a
+ cp ChangeLog $(r)/usr/share/doc/amanda-common/changelog
+ cp debian/xinetd.d/amandaidx $(s)/etc/xinetd.d
+ cp debian/xinetd.d/amidxtape $(s)/etc/xinetd.d
+ cp debian/xinetd.d/amanda $(r)/etc/xinetd.d
+ dh_installmenu -a
+ dh_installcron -a
+ dh_installchangelogs -a
+ dh_installdebconf -a
+ dh_strip -a
+ dh_compress -a
+ dh_movefiles -a --sourcedir=debian/amanda-common
+ rm -r $(r)/usr/share/amanda
+ dh_fixperms -av
+ # fix perms manually
+ chown -R backup:backup debian/*/var/lib/*
+ chmod -R u=rwX,g=rwX,o-rwx debian/*/var/lib/*
+ chown -R backup:backup $(s)/var/log/amanda
+ chmod -R u=rwX,g=rwX,o-rwx $(s)/var/log/amanda
+ chown -R backup:backup $(s)/etc/amanda
+ chmod -R u=rwX,g=rwX,o-rwx $(s)/etc/amanda
+ chown -R backup:backup $(c)/var/lib/amanda/gnutar-lists
+ chmod -R u=rwX,g=rwX,o-rwx $(c)/var/lib/amanda/gnutar-lists
+ # .. setuid
+ chown root:backup \
+ $(c)/usr/lib/amanda/application/amgtar \
+ $(c)/usr/lib/amanda/application/amstar \
+ $(c)/usr/lib/amanda/calcsize \
+ $(c)/usr/lib/amanda/killpgrp \
+ $(c)/usr/lib/amanda/rundump \
+ $(c)/usr/lib/amanda/runtar \
+ $(s)/usr/lib/amanda/dumper \
+ $(s)/usr/lib/amanda/planner \
+ $(s)/usr/sbin/amcheck
+ chmod u=srwx,g=rx,o=r \
+ $(c)/usr/lib/amanda/application/amgtar \
+ $(c)/usr/lib/amanda/application/amstar \
+ $(c)/usr/lib/amanda/calcsize \
+ $(c)/usr/lib/amanda/killpgrp \
+ $(c)/usr/lib/amanda/rundump \
+ $(c)/usr/lib/amanda/runtar \
+ $(s)/usr/lib/amanda/dumper \
+ $(s)/usr/lib/amanda/planner \
+ $(s)/usr/sbin/amcheck
+ install -o root -g root -m 0644 debian/amanda-client.lintian \
+ $(c)/usr/share/lintian/overrides/amanda-client
+ install -o root -g root -m 0644 debian/amanda-common.lintian \
+ $(r)/usr/share/lintian/overrides/amanda-common
+ install -o root -g root -m 0644 debian/amanda-server.lintian \
+ $(s)/usr/share/lintian/overrides/amanda-server
+ dh_makeshlibs -pamanda-common --noscripts
+ dh_installdeb -a
+ dh_perl -a usr/lib/amanda/perl
+ dh_shlibdeps -a -l"debian/amanda-common/usr/lib:debian/amanda-client/usr/lib:debian/amanda-server/usr/lib"
+ # strip out the non-versioned amanda-common references, we need
+ # the versioned ones in the control file and dupes are ugly...
+ sed -e 's/amanda-common, //' < debian/amanda-server.substvars > debian/blah
+ mv debian/blah debian/amanda-server.substvars
+ sed -e 's/amanda-common, //' < debian/amanda-client.substvars > debian/blah
+ mv debian/blah debian/amanda-client.substvars
+ dh_gencontrol -a
+ dh_md5sums -a
+ dh_builddeb -a
+
+source diff:
+ @echo >&2 'source and diff are obsolete - use dpkg-source -b'; false
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary
--- amanda-3.2.1.orig/debian/amanda-server.README.Debian
+++ amanda-3.2.1/debian/amanda-server.README.Debian
@@ -0,0 +1,149 @@
+amanda for DEBIAN
+-----------------
+
+Since every Amanda installation is different, there is some work you need to
+do to configure your server. For a simple setup, as root you need to:
+
+1. Create a directory under /etc/amanda for your backup config, we'll assume
+ a name 'DailySet1' as our example.
+
+ mkdir /etc/amanda/DailySet1
+
+ Make sure that /etc/amanda and all the files under it are owner and group
+ backup with directory permissions of 770 and file permissions of 660.
+
+2. populate this directory with config files. At a minimum, you need
+ amanda.conf and disklist.
+
+ cp /usr/share/doc/amanda-server/examples/amanda.conf \
+ /etc/amanda/DailySet1/amanda.conf*
+ cp /usr/share/doc/amanda-server/examples/disklist \
+ /etc/amanda/DailySet1/disklist
+
+ Edit these files as needed, following the instructions in each file.
+
+3. Make sure that /etc/amanda and all the files under it are owner and group
+ backup with directory permissions of 770 and file permissions of 660.
+
+ chown -R backup:backup /etc/amanda
+
+3. Prepare the "holding disk" if you plan to use one (highly recommended!) by
+ ensuring user backup can access it. See the note below indicating that it
+ may be better to use a subdirectory and not a mount point to avoid having
+ system artifacts like the lost+found directory confuse things.
+
+ chown -R backup:backup
+
+4. Install a suitable crontab for user backup. If you used DailySet1 as your
+ configuration name, you can just install the provided example. If you
+ picked some other name, you will obviously need to edit a copy of the
+ example before installing it.
+
+ crontab -u backup /usr/share/doc/amanda-server/examples/crontab.amanda
+
+To use all of Amanda's features, you probably also want to put each client
+machine's root user in the .rhosts or .amandahosts for ~backup on the server
+machine. On Debian systems, this is usually linked to /etc/amandahosts, but
+if you have clients running other operating systems you'll have to find the
+right place yourself.
+
+
+NOTE: If you want to backup your server too, you need to treat it as both a
+client *and* a server, see /usr/share/doc/amanda-client/README.Debian for
+more information.
+
+
+For more complex setups, consult the manpages and the extra documents and
+example files in /usr/share/doc/amanda-common, or look at www.amanda.org on
+the web.
+
+Another Note: if you use floppy tapes you have to use the sftape interface
+for use with ftape(>=3.03).
+
+Jean Pierre LeJacq reports the following about
+his experience using ftape:
+
+ I'm using ftape successfully with amanda but only after
+ struggling. The crucial trick was to set the block size with with ftmt to
+ be the same as used by amanda. I've implemented this with this entry in
+ /etc/modules.conf:
+
+ alias char-major-27 zftape
+ pre-install zftape /sbin/swapout 5
+ post-install zftape /bin/ftmt -f /dev/nzqft0 setblk 32768
+
+
+To ease use with firewalls, Amanda has been built with options restricting the
+use of TCP to the port range 50000-50100, and UDP to the port range 840-860.
+
+Sam Johnston reported problems with an Amanda server on which
+bastille was used with the "restrict system resources" option. See bug
+118616 in the Debian bug tracking system for more information.
+
+If you choose to use the SSH authentication method and associated transport,
+please be aware that there may be problems if /usr/lib/amanda/dumper is suid.
+You can fix this on your server with chmod u-s /usr/lib/amanda/dumper, or
+investigate dpkg-statoverride.
+
+Concerns have been expressed about the reliability of 'dump' as a backup tool
+on live Linux systems. Nothing can guarantee a consistent and meaningful
+backup of a live filesystem under all circumstances, and the maintainer of
+these packages uses dump with good results.
+
+The tar utility is 'essential' in Debian and so will always be around, is not
+tied to any specific filesystem type, and there are entries in the default
+amanda.conf file defining dump types using tar. This may therefore be a good
+option to consider.
+
+Note that if you are using tar with amanda, and getting errors about missing
+exclude files (particularly on upgrades from older versions), then you may
+need to update your dumptypes definition to explicitly indicate that the
+exclude file is optional, as shown in this example:
+
+ define dumptype userdata-lowvalue {
+ program "GNUTAR"
+ comment "Low value user data dumped with tar"
+ options compress-fast, index
+ exclude list optional ".amandaexclude"
+ priority low
+ }
+
+- - - - -
+
+If you see backups failing with an error like:
+
+ driver: FATAL flush line 1: syntax error (skipping != FLUSH)
+
+The problem may be that some versions of Amanda around 2.5.2 are not
+happy if there are unexpected contents in the holdingdisk you have
+defined on the server. This can occur, for example, if you are using
+the mount point of a separate filesystem that contains a lost+found
+directory. The quick fix is to create a subdirectory in that partition
+for Amanda to use that will have no such unexpected contents. For more
+info on this issue see:
+
+ http://forums.zmanda.com/archive/index.php/t-591.html
+
+- - - - -
+
+If you see things like this in dmesg:
+
+ INFO: task ammt:9839 blocked for more than 120 seconds.
+ "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+
+This information from Marc Schaefer may relevant:
+
+> AFAIK it's because mtio operations are done in D state (uninterruptible
+> sleep).
+>
+> And except for mtio operations which may last more than two minutes,
+> nothing in the usual kernel operation will last that long.
+>
+> Solutions:
+> - either fix mtio to be interruptible (which may well cause problems
+> because e.g. SCSI reselection might happen later)
+> - use the proposed work-around
+> - ignore those messages in your logcheck.
+
+
+
--- amanda-3.2.1.orig/debian/amanda-server.files
+++ amanda-3.2.1/debian/amanda-server.files
@@ -0,0 +1,48 @@
+usr/lib/amanda/amcat.awk
+usr/lib/amanda/amcleanupdisk
+usr/lib/amanda/amidxtaped
+usr/lib/amanda/amindexd
+usr/lib/amanda/amlogroll
+usr/lib/amanda/amplot.*
+usr/lib/amanda/amtrmidx
+usr/lib/amanda/amtrmlog
+usr/lib/amanda/chg-*
+usr/lib/amanda/driver
+usr/lib/amanda/dumper
+usr/lib/amanda/planner
+usr/lib/amanda/taper
+usr/sbin/amadmin
+usr/sbin/amcheck
+usr/sbin/amcheckdb
+usr/sbin/amcheckdump
+usr/sbin/amcleanup
+usr/sbin/amdump
+usr/sbin/amflush
+usr/sbin/amgetconf
+usr/sbin/amlabel
+usr/sbin/amoverview
+usr/sbin/amplot
+usr/sbin/amreport
+usr/sbin/amrmtape
+usr/sbin/amstatus
+usr/sbin/amtape
+usr/sbin/amtapetype
+usr/sbin/amtoc
+usr/share/man/man8/amadmin.8.gz
+usr/share/man/man8/amanda.8.gz
+usr/share/man/man8/amcheck.8.gz
+usr/share/man/man8/amcheckdb.8.gz
+usr/share/man/man8/amcheckdump.8.gz
+usr/share/man/man8/amcleanup.8.gz
+usr/share/man/man8/amdump.8.gz
+usr/share/man/man8/amflush.8.gz
+usr/share/man/man8/amgetconf.8.gz
+usr/share/man/man8/amlabel.8.gz
+usr/share/man/man8/amoverview.8.gz
+usr/share/man/man8/amplot.8.gz
+usr/share/man/man8/amreport.8.gz
+usr/share/man/man8/amrmtape.8.gz
+usr/share/man/man8/amstatus.8.gz
+usr/share/man/man8/amtape.8.gz
+usr/share/man/man8/amtapetype.8.gz
+usr/share/man/man8/amtoc.8.gz
--- amanda-3.2.1.orig/debian/templates
+++ amanda-3.2.1/debian/templates
@@ -0,0 +1,7 @@
+Template: amanda-common/merge_amandates
+Type: error
+_Description: Please merge /var/lib/amandates and /var/lib/amanda/amandates
+ You have both /var/lib/amandates and /var/lib/amanda/amandates. Please
+ review the files, and merge the contents you care about to the
+ /var/lib/amanda/amandates location, and remove the old file
+ /var/lib/amandates.
--- amanda-3.2.1.orig/debian/watch
+++ amanda-3.2.1/debian/watch
@@ -0,0 +1,7 @@
+# debian/watch for amanda
+# format version number, currently 3; this line is compulsory!
+version=3
+# If your package is located on sourceforge, use the following format
+# to automatically use the qa.debian.org redirector, avoiding SF's
+# difficult mirror system.
+http://sf.net/amanda/amanda-([0-9]+\.[0-9]+\.[0-9]+[^b]*)\.tar\.gz debian uupdate
--- amanda-3.2.1.orig/debian/amanda-common.postinst
+++ amanda-3.2.1/debian/amanda-common.postinst
@@ -0,0 +1,61 @@
+#!/bin/sh -e
+
+. /usr/share/debconf/confmodule
+
+if [ "$1" = configure ]; then
+ if ! getent passwd backup; then
+ adduser --quiet --system --no-create-home --home /var/backups \
+ --shell /bin/sh --uid 34 --gid 34 backup
+ fi
+
+ if [ ! -f /var/backups/.profile ]; then
+ echo 'PATH="$PATH:/usr/sbin"' > /var/backups/.profile
+ fi
+
+ groupadd -f -g 34 backup
+ groupadd -f -g 26 tape
+
+ adduser backup disk
+ adduser backup tape
+
+ # in case we get installed first
+ if [ ! -d /var/lib/amanda ]; then
+ mkdir -p /var/lib/amanda
+ fi
+
+ # try to handle a /var/lib/amandates file, since we created it
+ # incorrectly in previous versions of the amanda packages for Debian
+ if [ -f /var/lib/amandates ]; then
+ if [ ! -f /var/lib/amanda/amandates ]; then
+ mv /var/lib/amandates /var/lib/amanda/amandates
+ fi
+ fi
+
+ # make sure amandates exists and has the right perms
+ if [ ! -f /var/lib/amanda/amandates ]; then
+ touch /var/lib/amanda/amandates
+ fi
+ chown backup:backup /var/lib/amanda/amandates
+
+ # make sure user backup has a home directory
+ if [ ! -d ~backup ]; then
+ mkdir -p ~backup
+ fi
+
+ # make sure there is a .amandahosts symlink
+ if [ ! -L ~backup/.amandahosts ]; then
+ ln -sf /etc/amandahosts ~backup/.amandahosts
+ fi
+
+ # make sure /var/log/amanda exists
+ if [ ! -d /var/log/amanda ]; then
+ mkdir -p /var/log/amanda
+ fi
+
+ chown backup:backup ~backup/.amandahosts /etc/amandahosts \
+ /var/log/amanda
+ chmod 600 ~backup/.amandahosts /etc/amandahosts
+ chmod 770 /var/log/amanda
+fi
+
+#DEBHELPER#
--- amanda-3.2.1.orig/debian/amandahosts
+++ amanda-3.2.1/debian/amandahosts
@@ -0,0 +1 @@
+localhost backup
--- amanda-3.2.1.orig/debian/amanda-common.postrm
+++ amanda-3.2.1/debian/amanda-common.postrm
@@ -0,0 +1,37 @@
+#!/bin/sh -e
+case "$1" in
+ purge)
+ if [ -d /var/log/amanda ]; then
+ rm -rf /var/log/amanda
+ fi
+ if [ -d /var/lib/amanda-gnutar-lists ]; then
+ rm -rf /var/lib/amanda-gnutar-lists
+ fi
+ if [ -d /var/lib/amanda-index ]; then
+ rm -rf /var/lib/amanda-index
+ fi
+ if [ -d /var/lib/amanda ]; then
+ rm -rf /var/lib/amanda
+ fi
+ # keep this around to clean up after old, broken amanda packages
+ # new packages have amandates in /var/lib/amanda...
+ if [ -f /var/lib/amandates ]; then
+ rm -f /var/lib/amandates
+ fi
+
+ rm -f ~backup/.amandahosts
+
+ ;;
+ remove|upgrade|deconfigure)
+ ;;
+
+ failed-upgrade)
+ ;;
+
+ *)
+ echo "unknown argument --> $1" >&2
+ exit 0
+ ;;
+esac
+
+#DEBHELPER#
--- amanda-3.2.1.orig/debian/amanda-server.prerm
+++ amanda-3.2.1/debian/amanda-server.prerm
@@ -0,0 +1,6 @@
+#!/bin/sh -e
+
+update-inetd --remove amandaidx
+update-inetd --remove amidxtape
+
+#DEBHELPER#
--- amanda-3.2.1.orig/debian/compat
+++ amanda-3.2.1/debian/compat
@@ -0,0 +1 @@
+5
--- amanda-3.2.1.orig/debian/amanda.conf.in
+++ amanda-3.2.1/debian/amanda.conf.in
@@ -0,0 +1,673 @@
+#
+# amanda.conf - sample Amanda configuration file.
+#
+# If your configuration is called, say, "DailySet1", then this file
+# normally goes in /etc/amanda/DailySet1/amanda.conf.
+#
+# You need to edit this file to suit your needs. See the documentation in
+# this file, in the "man amanda" man page, in the /usr/share/docs/amanda*
+# directories, and on the web at www.amanda.org for more information.
+#
+
+org "DailySet1" # your organization name for reports
+mailto "root" # space separated list of operators at your site
+dumpuser "backup" # the user to run dumps under
+
+inparallel 4 # maximum dumpers that will run in parallel (max 63)
+ # this maximum can be increased at compile-time,
+ # modifying MAX_DUMPERS in server-src/driverio.h
+dumporder "sssS" # specify the priority order of each dumper
+ # s -> smallest size
+ # S -> biggest size
+ # t -> smallest time
+ # T -> biggest time
+ # b -> smallest bandwitdh
+ # B -> biggest bandwitdh
+ # try "BTBTBTBTBTBT" if you are not holding
+ # disk constrained
+
+taperalgo first # The algorithm used to choose which dump image to send
+ # to the taper.
+
+ # Possible values:
+ # [first|firstfit|largest|largestfit|smallest|last]
+ # Default: first.
+
+ # first First in - first out.
+ # firstfit The first dump image that will fit on
+ # the current tape.
+ # largest The largest dump image.
+ # largestfit The largest dump image that will fit on
+ # the current tape.
+ # smallest The smallest dump image.
+ # last Last in - first out.
+
+displayunit "k" # Possible values: "k|m|g|t"
+ # Default: k.
+ # The unit used to print many numbers.
+ # k=kilo, m=mega, g=giga, t=tera
+
+netusage 600 Kbps # maximum net bandwidth for Amanda, in KB per sec
+
+dumpcycle 4 weeks # the number of days in the normal dump cycle
+runspercycle 20 # the number of amdump runs in dumpcycle days
+ # (4 weeks * 5 amdump runs per week -- just weekdays)
+tapecycle 25 tapes # the number of tapes in rotation
+ # 4 weeks (dumpcycle) times 5 tapes per week (just
+ # the weekdays) plus a few to handle errors that
+ # need amflush and so we do not overwrite the full
+ # backups performed at the beginning of the previous
+ # cycle
+
+bumpsize 20 Mb # minimum savings (threshold) to bump level 1 -> 2
+bumppercent 20 # minimum savings (threshold) to bump level 1 -> 2
+bumpdays 1 # minimum days at each level
+bumpmult 4 # threshold = bumpsize * bumpmult^(level-1)
+
+etimeout 300 # number of seconds per filesystem for estimates.
+#etimeout -600 # total number of seconds for estimates.
+# a positive number will be multiplied by the number of filesystems on
+# each host; a negative number will be taken as an absolute total time-out.
+# The default is 5 minutes per filesystem.
+
+dtimeout 1800 # number of idle seconds before a dump is aborted.
+
+ctimeout 30 # maximum number of seconds that amcheck waits
+ # for each client host
+
+tapebufs 20
+# A positive integer telling taper how many 32k buffers to allocate.
+# WARNING! If this is set too high, taper will not be able to allocate
+# the memory and will die. The default is 20 (640k).
+
+
+# Specify tape device and/or tape changer. If you don't have a tape
+# changer, and you don't want to use more than one tape per run of
+# amdump, just comment out the definition of tpchanger.
+
+# Some tape changers require tapedev to be defined; others will use
+# their own tape device selection mechanism. Some use a separate tape
+# changer device (changerdev), others will simply ignore this
+# parameter. Some rely on a configuration file (changerfile) to
+# obtain more information about tape devices, number of slots, etc;
+# others just need to store some data in files, whose names will start
+# with changerfile. For more information about individual tape
+# changers, read docs/TAPE.CHANGERS.
+
+# At most one changerfile entry must be defined; select the most
+# appropriate one for your configuration. If you select man-changer,
+# keep the first one; if you decide not to use a tape changer, you may
+# comment them all out.
+
+runtapes 1 # number of tapes to be used in a single run of amdump
+tpchanger "chg-manual" # the tape-changer glue script
+tapedev "@DEFAULT_TAPE_DEVICE@" # the no-rewind tape device to be used
+rawtapedev "@DEFAULT_RAW_TAPE_DEVICE@" # the raw device to be used (ftape only)
+#changerfile "/etc/amanda/DailySet1/changer"
+#changerfile "/etc/amanda/DailySet1/changer-status"
+changerfile "/etc/amanda/DailySet1/changer.conf"
+changerdev "@DEFAULT_CHANGER_DEVICE@"
+
+# If you want Amanda to automatically label any non-Amanda tapes it
+# encounters, uncomment the line below. Note that this will ERASE any
+# non-Amanda tapes you may have, and may also ERASE any near-failing tapes.
+# Use with caution.
+## label_new_tapes "DailySet1-%%%"
+
+# maxdumpsize -1 # Maximum number of bytes the planner will schedule
+ # for a run (default: runtapes * tape_length).
+tapetype HP-DAT # what kind of tape it is (see tapetypes below)
+labelstr "^DailySet1-[0-9][0-9]*$" # label constraint regex: all tapes must match
+
+amrecover_do_fsf yes # amrecover will call amrestore with the
+ # -f flag for faster positioning of the tape.
+amrecover_check_label yes # amrecover will call amrestore with the
+ # -l flag to check the label.
+amrecover_changer "@DEFAULT_TAPE_DEVICE@" # amrecover will use the changer if you restore
+ # from this device.
+ # It could be a string like 'changer' and
+ # amrecover will use your changer if you
+ # set your tape with 'settape changer'
+
+# Specify holding disks. These are used as a temporary staging area for
+# dumps before they are written to tape and are recommended for most sites.
+# The advantages include: tape drive is more likely to operate in streaming
+# mode (which reduces tape and drive wear, reduces total dump time); multiple
+# dumps can be done in parallel (which can dramatically reduce total dump time.
+# The main disadvantage is that dumps on the holding disk need to be flushed
+# (with amflush) to tape after an operating system crash or a tape failure.
+# If no holding disks are specified then all dumps will be written directly
+# to tape. If a dump is too big to fit on the holding disk than it will be
+# written directly to tape. If more than one holding disk is specified then
+# they will all be used based on activity and available space.
+
+holdingdisk hd1 {
+ comment "main holding disk"
+ directory "/dumps/amanda" # where the holding disk is
+ use -100 Mb # how much space can we use on it
+ # a non-positive value means:
+ # use all space but that value
+ chunksize 1Gb # size of chunk if you want big dump to be
+ # dumped on multiple files on holding disks
+ # N Kb/Mb/Gb split images in chunks of size N
+ # The maximum value should be
+ # (MAX_FILE_SIZE - 1Mb)
+ # 0 same as INT_MAX bytes
+ }
+#holdingdisk hd2 {
+# directory "/dumps2/amanda"
+# use 1000 Mb
+# }
+#holdingdisk hd3 {
+# directory "/mnt/disk4"
+# use 1000 Mb
+# }
+
+
+# If amanda cannot find a tape on which to store backups, it will run
+# as many backups as it can to the holding disks. In order to save
+# space for unattended backups, by default, amanda will only perform
+# incremental backups in this case, i.e., it will reserve 100% of the
+# holding disk space for the so-called degraded mode backups.
+# However, if you specify a different value for the `reserve'
+# parameter, amanda will not degrade backups if they will fit in the
+# non-reserved portion of the holding disk.
+
+# reserve 30 # percent
+# This means save at least 30% of the holding disk space for degraded
+# mode backups.
+
+autoflush no #
+# if autoflush is set to yes, then amdump will schedule all dump on
+# holding disks to be flush to tape during the run.
+
+# The format for a ColumnSpec is a ',' seperated list of triples.
+# Each triple consists of
+# + the name of the column (as in ColumnNameStrings)
+# + prefix before the column
+# + the width of the column, if set to -1 it will be recalculated
+# to the maximum length of a line to print.
+# Example:
+# "Disk=1:17,HostName=1:10,OutKB=1:7"
+# or
+# "Disk=1:-1,HostName=1:10,OutKB=1:7"
+#
+# You need only specify those colums that should be changed from
+# the default. If nothing is specified in the configfile, the
+# above compiled in values will be in effect, resulting in an
+# output as it was all the time.
+# The names of the colums are:
+# HostName, Disk, Level, OrigKB, OutKB, Compress, DumpTime, DumpRate,
+# TapeTime and TapeRate.
+# ElB, 1999-02-24.
+# columnspec "Disk=1:18,HostName=0:10,OutKB=1:7"
+
+
+# Amanda needs a few Mb of diskspace for the log and debug files,
+# as well as a database. This stuff can grow large, so the conf directory
+# isn't usually appropriate. Some sites use /usr/local/var and some /usr/adm.
+# Create an amanda directory under there. You need a separate infofile and
+# logdir for each configuration, so create subdirectories for each conf and
+# put the files there. Specify the locations below.
+
+# Note that, although the keyword below is infofile, it is only so for
+# historic reasons, since now it is supposed to be a directory (unless
+# you have selected some database format other than the `text' default)
+infofile "/etc/amanda/DailySet1/curinfo" # database DIRECTORY
+logdir "/etc/amanda/DailySet1" # log directory
+indexdir "/etc/amanda/DailySet1/index" # index directory
+#tapelist "@CONFIG_DIR/DailySet1/tapelist" # list of used tapes
+# tapelist is stored, by default, in the directory that contains amanda.conf
+
+# tapetypes
+
+# Define the type of tape you use here, and use it in "tapetype"
+# above. Some typical types of tapes are included here. The tapetype
+# tells amanda how many MB will fit on the tape, how big the filemarks
+# are, and how fast the tape device is.
+
+# A filemark is the amount of wasted space every time a tape section
+# ends. If you run `make tapetype' in tape-src, you'll get a program
+# that generates tapetype entries, but it is slow as hell, use it only
+# if you really must and, if you do, make sure you post the data to
+# the amanda mailing list, so that others can use what you found out
+# by searching the archives.
+
+# For completeness Amanda should calculate the inter-record gaps too,
+# but it doesn't. For EXABYTE and DAT tapes this is ok. Anyone using
+# 9 tracks for amanda and need IRG calculations? Drop me a note if
+# so.
+
+# If you want amanda to print postscript paper tape labels
+# add a line after the comment in the tapetype of the form
+# lbl-templ "/path/to/postscript/template/label.ps"
+
+# if you want the label to go to a printer other than the default
+# for your system, you can also add a line above for a different
+# printer. (i usually add that line after the dumpuser specification)
+
+# dumpuser "operator" # the user to run dumps under
+# printer "mypostscript" # printer to print paper label on
+
+# here is an example of my definition for an EXB-8500
+
+# define tapetype EXB-8500 {
+# ...
+# lbl-templ "/etc/amanda/config/lbl.exabyte.ps"
+# }
+
+
+define tapetype QIC-60 {
+ comment "Archive Viper"
+ length 60 mbytes
+ filemark 100 kbytes # don't know a better value
+ speed 100 kbytes # dito
+}
+
+define tapetype DEC-DLT2000 {
+ comment "DEC Differential Digital Linear Tape 2000"
+ length 15000 mbytes
+ filemark 8 kbytes
+ speed 1250 kbytes
+}
+
+# goluboff@butch.Colorado.EDU
+# in amanda-users (Thu Dec 26 01:55:38 MEZ 1996)
+define tapetype DLT {
+ comment "DLT tape drives"
+ length 20000 mbytes # 20 Gig tapes
+ filemark 2000 kbytes # I don't know what this means
+ speed 1536 kbytes # 1.5 Mb/s
+}
+
+define tapetype SURESTORE-1200E {
+ comment "HP AutoLoader"
+ length 3900 mbytes
+ filemark 100 kbytes
+ speed 500 kbytes
+}
+
+define tapetype EXB-8500 {
+ comment "Exabyte EXB-8500 drive on decent machine"
+ length 4200 mbytes
+ filemark 48 kbytes
+ speed 474 kbytes
+}
+
+define tapetype EXB-8200 {
+ comment "Exabyte EXB-8200 drive on decent machine"
+ length 2200 mbytes
+ filemark 2130 kbytes
+ speed 240 kbytes
+}
+
+define tapetype HP-DAT {
+ comment "DAT tape drives"
+ # data provided by Rob Browning
+ length 1930 mbytes
+ filemark 111 kbytes
+ speed 468 kbytes
+}
+
+define tapetype DAT {
+ comment "DAT tape drives"
+ length 1000 mbytes # these numbers are not accurate
+ filemark 100 kbytes # but you get the idea
+ speed 100 kbytes
+}
+
+define tapetype MIMSY-MEGATAPE {
+ comment "Megatape (Exabyte based) drive through Emulex on Vax 8600"
+ length 2200 mbytes
+ filemark 2130 kbytes
+ speed 170 kbytes # limited by the Emulex bus interface, ugh
+}
+
+
+# dumptypes
+#
+# These are referred to by the disklist file. The dumptype specifies
+# certain parameters for dumping including:
+# auth - authentication scheme to use between server and client.
+# Valid values are "bsd", "krb4", "krb5" and "ssh".
+# Default: [auth bsd]
+# comment - just a comment string
+# comprate - set default compression rate. Should be followed by one or
+# two numbers, optionally separated by a comma. The 1st is
+# the full compression rate; the 2nd is the incremental rate.
+# If the second is omitted, it is assumed equal to the first.
+# The numbers represent the amount of the original file the
+# compressed file is expected to take up.
+# Default: [comprate 0.50, 0.50]
+# compress - specify compression of the backed up data. Valid values are:
+# "none" - don't compress the dump output.
+# "client best" - compress on the client using the best (and
+# probably slowest) algorithm.
+# "client fast" - compress on the client using fast algorithm.
+# "client custom" - compress using your custom client compression program.
+# use client_custom_compress "PROG" to specify
+# the custom compression program.
+# PROG must not contain white space.
+# "server best" - compress on the tape host using the best (and
+# probably slowest) algorithm.
+# "server fast" - compress on the tape host using a fast
+# algorithm. This may be useful when a fast
+# tape host is backing up slow clients.
+# "server custom" - compress using your server custom compression program.
+# use server_custom_compress "PROG" to specify
+# the custom compression program.
+# PROG must not contain white space.
+# Default: [compress client fast]
+# dumpcycle - set the number of days in the dump cycle, ie, set how often a
+# full dump should be performed. Default: from DUMPCYCLE above
+# estimate Determine the way AMANDA does it's estimate.
+# "client" - Use the same program as the dumping program,
+# this is the most accurate way to do estimates,
+# but it can take a long time.
+# "calcsize" - Use a faster program to do estimates, but the
+# result is less accurate.
+# "server" - Use only statistics from the previous run to
+# give an estimate,
+# it takes only a few seconds but the result is not
+# accurate if your disk usage changes from day to day.
+# Default: [client]
+# encrypt - specify encryption of the backed up data. Valid values are:
+# "none" - don't encrypt the dump output.
+# "client" - encrypt on the client using the program specified by
+# client_encrypt "PROG".
+# Use client_decrypt_option to specify the decrypt-
+# parameter, default is "-d".
+# PROG and decrypt-parameter must not contain white space.
+# "server" - encrypt on the server using the program specified by
+# server_encrypt "PROG".
+# Use server_decrypt_option to specify the decrypt-
+# parameter, default is "-d".
+# PROG and decrypt-parameter must not contain white space.
+# Default: [none]
+# exclude - specify files and directories to be excluded from the dump.
+# Useful with gnutar only; silently ignored by dump and samba.
+# Valid values are:
+# "pattern" - a shell glob pattern defining which files
+# to exclude.
+# gnutar gets --exclude="pattern"
+# list "filename" - a file (on the client!) containing patterns
+# re's (1 per line) defining which files to
+# exclude.
+# gnutar gets --exclude-from="filename"
+# Note that the `full pathname' of a file within its
+# filesystem starts with `./', because of the way amanda runs
+# gnutar: `tar -C $mountpoint -cf - --lots-of-options .' (note
+# the final dot!) Thus, if you're backing up `/usr' with a
+# diskfile entry like ``host /usr gnutar-root', but you don't
+# want to backup /usr/tmp, your exclude list should contain
+# the pattern `./tmp', as this is relative to the `/usr' above.
+# Please refer to the man-page of gnutar for more information.
+# If a relative pathname is specified as the exclude list,
+# it is searched from within the directory that is
+# going to be backed up.
+# Default: include all files
+# holdingdisk - should the holding disk be used for this dump. Useful for
+# dumping the holding disk itself. Default: [holdingdisk yes]
+# ignore - do not back this filesystem up. Useful for sharing a single
+# disklist in several configurations.
+# index - keep an index of the files backed up. Default: [index no]
+# kencrypt - encrypt the data stream between the client and server.
+# Default: [kencrypt no]
+# maxdumps - max number of concurrent dumps to run on the client.
+# Default: [maxdumps 1]
+# maxpromoteday - max number of day for a promotion, set it 0 if you don't
+# want promotion, set it to 1 or 2 if your disk get
+# overpromoted.
+# Default: [10000]
+# priority - priority level of the dump. Valid levels are "low", "medium"
+# or "high". These are really only used when Amanda has no
+# tape to write to because of some error. In that "degraded
+# mode", as many incrementals as will fit on the holding disk
+# are done, higher priority first, to insure the important
+# disks are at least dumped. Default: [priority medium]
+# program - specify the dump system to use. Valid values are "DUMP" and
+# "GNUTAR". Default: [program "DUMP"].
+# record - record the backup in the time-stamp-database of the backup
+# program (e.g. /var/lib/dumpdates for DUMP or
+# @GNUTAR_LISTED_INCREMENTAL_DIRX@ for GNUTAR.).
+# Default: [record yes]
+# skip-full - skip the disk when a level 0 is due, to allow full backups
+# outside Amanda, eg when the machine is in single-user mode.
+# skip-incr - skip the disk when the level 0 is NOT due. This is used in
+# archive configurations, where only full dumps are done and
+# the tapes saved.
+# starttime - delay the start of the dump? Default: no delay
+# strategy - set the dump strategy. Valid strategies are currently:
+# "standard" - the standard one.
+# "nofull" - do level 1 dumps every time. This can be used,
+# for example, for small root filesystems that
+# only change slightly relative to a site-wide
+# prototype. Amanda then backs up just the
+# changes.
+# "noinc" - do level 0 dumps every time.
+# "skip" - skip all dumps. Useful for sharing a single
+# disklist in several configurations.
+# "incronly" - do only incremental dumps. This is similar
+# to strategy 'nofull', but will increase
+# the dump level as usual. Full dumps will
+# only be performed when an 'amadmin force'
+# has been issued
+# Default: [strategy standard]
+# tape_splitsize - (optional) split dump file into pieces of a specified size.
+# This allows dumps to be spread across multiple tapes, and can
+# potentially make more efficient use of tape space. Note that
+# if this value is too large (more than half the size of the
+# average dump being split), substantial tape space can be
+# wasted. If too small, large dumps will be split into
+# innumerable tiny dumpfiles, adding to restoration complexity.
+# A good rule of thumb, usually, is 1/10 of the size of your
+# tape. Default: [disabled]
+# split_diskbuffer - (optional) When dumping a split dump in PORT-WRITE
+# mode (usually meaning "no holding disk"), buffer the split
+# chunks to a file in the directory specified by this option.
+# Default: [none]
+# fallback_splitsize - (optional) When dumping a split dump in PORT-WRITE
+# mode, if no split_diskbuffer is specified (or if we somehow
+# fail to use our split_diskbuffer), we must buffer split
+# chunks in memory. This specifies the maximum size split
+# chunks can be in this scenario, and thus the maximum amount
+# of memory consumed for in-memory splitting. Default: [10m]
+#
+# Note that you may specify previously defined dumptypes as a shorthand way of
+# defining parameters.
+
+define dumptype global {
+ comment "Global definitions"
+ # This is quite useful for setting global parameters, so you don't have
+ # to type them everywhere. All dumptype definitions in this sample file
+ # do include these definitions, either directly or indirectly.
+ # There's nothing special about the name `global'; if you create any
+ # dumptype that does not contain the word `global' or the name of any
+ # other dumptype that contains it, these definitions won't apply.
+ # Note that these definitions may be overridden in other
+ # dumptypes, if the redefinitions appear *after* the `global'
+ # dumptype name.
+ # You may want to use this for globally enabling or disabling
+ # indexing, recording, etc. Some examples:
+ # index yes
+ # record no
+ # split_diskbuffer "/raid/amanda"
+ # fallback_splitsize 64m
+}
+
+define dumptype always-full {
+ global
+ comment "Full dump of this filesystem always"
+ compress none
+ priority high
+ dumpcycle 0
+}
+
+define dumptype root-tar {
+ global
+ program "GNUTAR"
+ comment "root partitions dumped with tar"
+ compress none
+ index
+# exclude list "/etc/amanda/exclude.gtar"
+ priority low
+}
+
+define dumptype user-tar {
+ root-tar
+ comment "user partitions dumped with tar"
+ priority medium
+}
+
+define dumptype user-tar-span {
+ root-tar
+ tape_splitsize 3 Gb
+ comment "tape-spanning user partitions dumped with tar"
+ priority medium
+}
+
+define dumptype high-tar {
+ root-tar
+ comment "partitions dumped with tar"
+ priority high
+}
+
+define dumptype comp-root-tar {
+ root-tar
+ comment "Root partitions with compression"
+ compress client fast
+}
+
+define dumptype comp-user-tar {
+ user-tar
+ compress client fast
+}
+
+define dumptype comp-user-tar-span {
+ user-tar-span
+ compress client fast
+}
+
+define dumptype holding-disk {
+ global
+ comment "The master-host holding disk itself"
+ holdingdisk no # do not use the holding disk
+ priority medium
+}
+
+define dumptype comp-user {
+ global
+ comment "Non-root partitions on reasonably fast machines"
+ compress client fast
+ priority medium
+}
+
+define dumptype comp-user-span {
+ global
+ tape_splitsize 5 Gb
+ comment "Tape-spanning non-root partitions on reasonably fast machines"
+ compress client fast
+ priority medium
+}
+
+define dumptype nocomp-user {
+ comp-user
+ comment "Non-root partitions on slow machines"
+ compress none
+}
+
+define dumptype nocomp-user-span {
+ comp-user-span
+ comment "Tape-spanning non-root partitions on slow machines"
+ compress none
+}
+
+define dumptype comp-root {
+ global
+ comment "Root partitions with compression"
+ compress client fast
+ priority low
+}
+
+define dumptype nocomp-root {
+ comp-root
+ comment "Root partitions without compression"
+ compress none
+}
+
+define dumptype comp-high {
+ global
+ comment "very important partitions on fast machines"
+ compress client best
+ priority high
+}
+
+define dumptype nocomp-high {
+ comp-high
+ comment "very important partitions on slow machines"
+ compress none
+}
+
+define dumptype nocomp-test {
+ global
+ comment "test dump without compression, no /var/lib/dumpdates recording"
+ compress none
+ record no
+ priority medium
+}
+
+define dumptype comp-test {
+ nocomp-test
+ comment "test dump with compression, no /var/lib/dumpdates recording"
+ compress client fast
+}
+
+define dumptype custom-compress {
+ global
+ program "GNUTAR"
+ comment "test dump with custom client compression"
+ compress client custom
+ client_custom_compress "/usr/bin/bzip2"
+}
+
+define dumptype encrypt-fast {
+ global
+ program "GNUTAR"
+ comment "test dump with fast client compression and server symmetric encryption"
+ compress client fast
+ encrypt server
+ server_encrypt "/usr/local/sbin/amcrypt"
+ server_decrypt_option "-d"
+}
+
+# network interfaces
+#
+# These are referred to by the disklist file. They define the attributes
+# of the network interface that the remote machine is accessed through.
+# Notes: - netusage above defines the attributes that are used when the
+# disklist entry doesn't specify otherwise.
+# - the values below are only samples.
+# - specifying an interface does not force the traffic to pass
+# through that interface. Your OS routing tables do that. This
+# is just a mechanism to stop Amanda trashing your network.
+# Attributes are:
+# use - bandwidth above which amanda won't start
+# backups using this interface. Note that if
+# a single backup will take more than that,
+# amanda won't try to make it run slower!
+
+define interface local {
+ comment "a local disk"
+ use 1000 kbps
+}
+
+define interface le0 {
+ comment "10 Mbps ethernet"
+ use 400 kbps
+}
+
+# You may include other amanda configuration files, so you can share
+# dumptypes, tapetypes and interface definitions among several
+# configurations.
+
+#includefile "/etc/amanda/amanda.conf.main"
--- amanda-3.2.1.orig/debian/amanda-common.dirs
+++ amanda-3.2.1/debian/amanda-common.dirs
@@ -0,0 +1,4 @@
+etc/xinetd.d
+usr/lib
+usr/share/doc/amanda-common/examples
+usr/share/lintian/overrides
--- amanda-3.2.1.orig/debian/gbp.conf
+++ amanda-3.2.1/debian/gbp.conf
@@ -0,0 +1,46 @@
+# Configuration file for git-buildpackage and friends
+
+[DEFAULT]
+# the default build command:
+#builder = debuild -i\.git/ -I.git
+# the default clean command:
+#cleaner = debuild clean
+# the default branch for upstream sources:
+upstream-branch = upstream
+# the default branch for the debian patch:
+debian-branch = master
+# the default tag formats used:
+#upstream-tag = upstream/%(version)s
+#debian-tag = debian/%(version)s
+# use pristine-tar:
+pristine-tar = True
+
+# Options only affecting git-buildpackage
+[git-buildpackage]
+#upstream-branch = dfsgclean
+# uncomment this to automatically GPG sign tags
+#sign-tags = True
+# keyid to GPG sign tags with
+#keyid = 0xdeadbeef
+# push to a remote repository after a successful tag:
+posttag = git push --mirror
+# use this for more svn-buildpackage like behaviour:
+export-dir = ../build-area/amanda/
+#tarball-dir = ../tarballs/
+
+# Options only affecting git-import-orig
+[git-import-orig]
+#upstream-branch = newupstream
+#debian-branch = dfsgclean
+#filter = .svn
+
+# Options only affecting git-import-dsc
+[git-import-dsc]
+#upstream-branch = svn-upstream
+#filter = [ 'CVS', '.cvsignore' ]
+
+# Options only affecting git-dch
+[git-dch]
+#git-log = --no-merges
+#snapshot-number = snapshot + 1
+
--- amanda-3.2.1.orig/debian/tapetype.1
+++ amanda-3.2.1/debian/tapetype.1
@@ -0,0 +1,12 @@
+.TH TAPETYPE 1
+.SH NAME
+tapetype \- test a tape in a tape drive and generate an Amanda tapetype entry
+.SH SYNOPSIS
+.B tapetype
+.SH "DESCRIPTION"
+This manual page was written for the Debian GNU/Linux distribution
+because the original program does not have a manual page.
+
+.SH AUTHOR
+This manual page was written by Bdale Garbee ,
+for the Debian GNU/Linux system (but may be used by others).
--- amanda-3.2.1.orig/debian/amanda-client.README.Debian
+++ amanda-3.2.1/debian/amanda-client.README.Debian
@@ -0,0 +1,16 @@
+Notes on making amanda-client work on a Debian system
+
+
+To get indexing (or specifically amrecover) to work right two things need
+to be done:
+
+1. Edit server's /etc/hosts.allow and allow all client machines into
+ the daemons amindexd & amidxtaped.
+
+2. Edit the server(s) ~backup/.amandahosts and add an entry like:
+ " root"
+
+
+As always: for more complex setups consult the manpages and available
+documentation in /usr/share/doc/amanda-common ;-)
+
--- amanda-3.2.1.orig/debian/control
+++ amanda-3.2.1/debian/control
@@ -0,0 +1,115 @@
+Source: amanda
+Section: utils
+Priority: optional
+Maintainer: Bdale Garbee
+Vcs-Git: git://git.gag.com/debian/amanda
+Vcs-Browser: http://git.gag.com/?p=debian/amanda
+Build-Depends: debhelper (>= 5), dump, gnuplot, libncurses5-dev, libreadline-dev, libtool, flex, perl, smbclient, bsd-mailx | mailx, lpr, mtx, xfsdump, po-debconf, autotools-dev, libglib2.0-dev, procps, curl, libcurl4-openssl-dev
+Standards-Version: 3.9.1
+
+Package: amanda-common
+Architecture: any
+Depends: ${misc:Depends}, ${perl:Depends}, ${shlibs:Depends}, update-inetd, tar (>=1.12), perl5, bsd-mailx | mailx, debconf | debconf-2.0, adduser, openbsd-inetd | inet-superserver
+Suggests: amanda-server (= ${binary:Version}) | amanda-client (= ${binary:Version})
+Conflicts: amanda
+Replaces: amanda, amanda-client
+Description: Advanced Maryland Automatic Network Disk Archiver (Libs)
+ This package contains libraries required by the amanda client and
+ server packages.
+
+Package: amanda-server
+Architecture: any
+Depends: ${misc:Depends}, ${shlibs:Depends}, amanda-common (= ${binary:Version}), bsd-mailx | mailx
+Suggests: perl5, gnuplot, amanda-client (= ${binary:Version}), cpio | mt-st
+Conflicts: amanda, amanda-common (<< 1:2.5.2p1-3)
+Replaces: amanda-common (<< 1:2.5.2p1-3)
+Description: Advanced Maryland Automatic Network Disk Archiver (Server)
+ Amanda is a backup system designed to archive many computers on a
+ network to a single large-capacity tape drive. This package is
+ suitable for large amounts of data to backup. For smaller solutions
+ take a look at afbackup, tob, ...
+ .
+ Features:
+ * will back up multiple machines in parallel to a holding disk, blasting
+ finished dumps one by one to tape as fast as we can write files to
+ tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host
+ with a large holding disk can be filled by Amanda in under 4 hours.
+ * built on top of standard backup software: Unix dump/restore, and
+ later GNU Tar and others.
+ * does simple tape management: will not overwrite the wrong tape.
+ * supports tape changers via a generic interface. Easily customizable
+ to any type of tape carousel, robot, or stacker that can be controlled
+ via the unix command line.
+ * for a restore, tells you what tapes you need, and finds the proper
+ backup image on the tape for you.
+ * recovers gracefully from errors, including down or hung machines.
+ * reports results, including all errors in detail, in email to operators.
+ * will dynamically adjust backup schedule to keep within constraints:
+ no more juggling by hand when adding disks and computers to network.
+ * includes a pre-run checker program, that conducts sanity checks on both
+ the tape server host and all the client hosts (in parallel), and will
+ send an e-mail report of any problems that could cause the backups to
+ fail.
+ * can compress dumps before sending or after sending over the net, with
+ either compress or gzip.
+ * can optionally synchronize with external backups, for those large
+ timesharing computers where you want to do full dumps when the system
+ is down in single-user mode (since BSD dump is not reliable on active
+ filesystems): Amanda will still do your daily dumps.
+ * lots of other options; Amanda is very configurable.
+ .
+ For important notes, see /usr/share/doc/amanda-server/README.Debian.
+ .
+ Explanation of suggested programs:
+ - perl is needed for some non essential server utilities
+ - gnuplot is needed for plotting statistics of backups
+ - to backup the tape server, you need to install the client too
+
+Package: amanda-client
+Architecture: any
+Depends: ${misc:Depends}, ${shlibs:Depends}, amanda-common (= ${binary:Version})
+Suggests: gnuplot, dump, smbclient
+Conflicts: amanda, amanda-common (<< 1:2.5.2p1-3)
+Replaces: amanda-common (<< 1:2.5.2p1-3)
+Description: Advanced Maryland Automatic Network Disk Archiver (Client)
+ Amanda is a backup system designed to archive many computers on a
+ network to a single large-capacity tape drive. This package is
+ suitable for large amounts of data to backup. For smaller solutions
+ take a look at afbackup, tob, ...
+ .
+ Features:
+ * will back up multiple machines in parallel to a holding disk, blasting
+ finished dumps one by one to tape as fast as we can write files to
+ tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host
+ with a large holding disk can be filled by Amanda in under 4 hours.
+ * built on top of standard backup software: Unix dump/restore, and
+ later GNU Tar and others.
+ * does simple tape management: will not overwrite the wrong tape.
+ * supports tape changers via a generic interface. Easily customizable
+ to any type of tape carousel, robot, or stacker that can be controlled
+ via the unix command line.
+ * for a restore, tells you what tapes you need, and finds the proper
+ backup image on the tape for you.
+ * recovers gracefully from errors, including down or hung machines.
+ * reports results, including all errors in detail, in email to operators.
+ * will dynamically adjust backup schedule to keep within constraints:
+ no more juggling by hand when adding disks and computers to network.
+ * includes a pre-run checker program, that conducts sanity checks on both
+ the tape server host and all the client hosts (in parallel), and will
+ send an e-mail report of any problems that could cause the backups to
+ fail.
+ * can compress dumps before sending or after sending over the net, with
+ either compress or gzip.
+ * can optionally synchronize with external backups, for those large
+ timesharing computers where you want to do full dumps when the system
+ is down in single-user mode (since BSD dump is not reliable on active
+ filesystems): Amanda will still do your daily dumps.
+ * lots of other options; Amanda is very configurable.
+ .
+ THIS PACKAGE RELIES ON A RUNNING AMANDA SERVER IN YOUR NETWORK.
+ .
+ For important notes, see /usr/share/doc/amanda-client/README.Debian.
+ .
+ Explanation of suggested programs:
+ - gnuplot is needed for plotting statistics of backups
+
--- amanda-3.2.1.orig/debian/amanda-client.dirs
+++ amanda-3.2.1/debian/amanda-client.dirs
@@ -0,0 +1,3 @@
+usr/share/doc/amanda-client
+usr/share/lintian/overrides
+var/lib/amanda/gnutar-lists
--- amanda-3.2.1.orig/debian/amanda-client.postinst
+++ amanda-3.2.1/debian/amanda-client.postinst
@@ -0,0 +1,5 @@
+#!/bin/sh -e
+
+update-inetd --group "OTHER" --add "amanda dgram udp wait backup /usr/sbin/tcpd /usr/lib/amanda/amandad -auth=bsd amdump amindexd amidxtaped"
+
+#DEBHELPER#
--- amanda-3.2.1.orig/debian/amanda-server.dirs
+++ amanda-3.2.1/debian/amanda-server.dirs
@@ -0,0 +1,7 @@
+etc/amanda
+etc/xinetd.d
+usr/sbin
+usr/share/doc/amanda-server/examples
+usr/share/lintian/overrides
+var/lib/amanda
+var/log/amanda
--- amanda-3.2.1.orig/debian/amanda-common.lintian
+++ amanda-3.2.1/debian/amanda-common.lintian
@@ -0,0 +1 @@
+amanda-common: possible-gpl-code-linked-with-openssl
--- amanda-3.2.1.orig/debian/copyright
+++ amanda-3.2.1/debian/copyright
@@ -0,0 +1,42 @@
+This package was built by Bdale Garbee using sources downloaded
+from
+
+ ftp://ftp.amanda.org/pub/amanda/
+
+The Amanda copyright:
+
+/*
+ * Amanda, The Advanced Maryland Automatic Network Disk Archiver
+ * Copyright (c) 1991, 1996 University of Maryland at College Park
+ * All Rights Reserved.
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of U.M. not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. U.M. makes no representations about the
+ * suitability of this software for any purpose. It is provided "as is"
+ * without express or implied warranty.
+ *
+ * U.M. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL U.M.
+ * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * Author: James da Silva, Systems Design and Analysis Group
+ * Computer Science Department
+ * University of Maryland at College Park
+ */
+
+/*
+** This Version of Amanda contains parts of GNU programs
+** (alloca.c, exclude_file.c)
+*/
+
+On Debian GNU/Linux systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.
+
--- amanda-3.2.1.orig/debian/amanda-common.preinst
+++ amanda-3.2.1/debian/amanda-common.preinst
@@ -0,0 +1,12 @@
+#!/bin/sh -e
+
+# if a .amandahosts exists and is not a symlink, move it to /etc
+if [ ! -L ~backup/.amandahosts ]
+then
+ if [ -f ~backup/.amandahosts ]
+ then
+ mv -f ~backup/.amandahosts /etc/amandahosts
+ fi
+fi
+
+#DEBHELPER#
--- amanda-3.2.1.orig/debian/amanda-common.examples
+++ amanda-3.2.1/debian/amanda-common.examples
@@ -0,0 +1 @@
+example/*
--- amanda-3.2.1.orig/debian/amanda-server.postinst
+++ amanda-3.2.1/debian/amanda-server.postinst
@@ -0,0 +1,6 @@
+#!/bin/sh -e
+
+update-inetd --group "OTHER" --add "amandaidx stream tcp nowait backup /usr/sbin/tcpd /usr/lib/amanda/amindexd amindexd -auth=bsd amdump amindexd amidxtaped"
+update-inetd --group "OTHER" --add "amidxtape stream tcp nowait backup /usr/sbin/tcpd /usr/lib/amanda/amidxtaped amidxtaped -auth=bsd amdump amindexd amidxtaped"
+
+#DEBHELPER#
--- amanda-3.2.1.orig/debian/amanda-server.examples
+++ amanda-3.2.1/debian/amanda-server.examples
@@ -0,0 +1,3 @@
+debian/amanda.conf.in
+debian/crontab.amanda
+debian/disklist
--- amanda-3.2.1.orig/debian/config
+++ amanda-3.2.1/debian/config
@@ -0,0 +1,12 @@
+#!/bin/sh -e
+
+. /usr/share/debconf/confmodule
+
+# if both files exist, suggest they merge them
+# if only one exists, the postinst moves it
+if [ -f /var/lib/amandates ]; then
+ if [ -f /var/lib/amanda/amandates ]; then
+ db_input medium amanda-common/merge_amandates || true
+ db_go
+ fi
+fi
--- amanda-3.2.1.orig/debian/disklist.in
+++ amanda-3.2.1/debian/disklist.in
@@ -0,0 +1,68 @@
+# sample Amanda2 disklist file, derived from CS.UMD.EDU's disklist
+#
+# If your configuration is called, say, "DailySet1", then this file
+# normally goes in /etc/amanda/DailySet1/disklist.
+#
+# File format is:
+#
+# hostname diskdev dumptype
+#
+# where the dumptypes are defined by you in amanda.conf.
+
+
+# At our site, root partitions have a different dumptype because they
+# are of lower priority; they don't contain user data, and don't change
+# much from the department prototype. In a crunch, they can be left for
+# last or skipped.
+
+#hostname hda2 comp-user
+
+# A SPARCstation 1+
+#salty sd0a comp-root
+#salty sd0g comp-user
+#salty sd1g comp-user
+#salty sd2a comp-root
+#salty sd2g comp-user
+#salty sd3c comp-user
+
+# A DECstation 3100
+#slithy rz1a comp-root
+#slithy rz1g comp-user
+#slithy rz3a comp-root
+#slithy rz3g comp-user
+
+# We don't run compression on the master host since it is going to be
+# busy enough running amanda.
+#master sd0a nocomp-root
+#master sd0g nocomp-user
+# the holding disk can't be dumped to itself, it uses a disktype that
+# specifies the "no-hold" option (see amanda.conf).
+#master sd1c holding-disk
+
+# The chairman's disk is high priority to make sure it gets done.
+#bigwig sd0a comp-root
+#bigwig sd0g comp-high
+# Likewise the named databases in the root partition on our primary
+# nameserver. Also, compression is turned off because we don't want
+# to create any unnecessary load on this baby (it's only a Sun3).
+#bozo sd0a nocomp-high
+#bozo sd0g nocomp-user
+#bozo sd4c nocomp-user
+
+# Dump Joe's NetBSD machine, with the mounted MS-DOS partition dumped
+# using tar.
+#joespc wd0a comp-root
+#joespc wd0e comp-user
+#joespc /msdos comp-user-tar
+
+# Some really slow machines, like Sun2's and some Vaxstations, take
+# forever to compress their dumps: it's just not worth it.
+
+# A Sun2
+#cleo sd0a nocomp-root
+#cleo sd0g nocomp-user
+# A VaxStation
+#susie rz8a nocomp-root
+#susie rz8g nocomp-user
+
+# and so on ... well, you get the idea
--- amanda-3.2.1.orig/debian/amanda-server.lintian
+++ amanda-3.2.1/debian/amanda-server.lintian
@@ -0,0 +1,9 @@
+amanda-server: non-standard-dir-perm etc/amanda/ 0770 != 0755
+amanda-server: setuid-binary usr/lib/amanda/dumper 4754 root/backup
+amanda-server: setuid-binary usr/lib/amanda/planner 4754 root/backup
+amanda-server: setuid-binary usr/sbin/amcheck 4754 root/backup
+amanda-server: non-standard-dir-perm var/lib/amanda/ 0770 != 0755
+amanda-server: non-standard-dir-perm var/log/amanda/ 0770 != 0755
+amanda-server: maintainer-script-needs-depends-on-update-inetd prerm
+amanda-server: maintainer-script-needs-depends-on-update-inetd postinst
+amanda-server: possible-gpl-code-linked-with-openssl
--- amanda-3.2.1.orig/debian/docs
+++ amanda-3.2.1/debian/docs
@@ -0,0 +1,3 @@
+AUTHORS
+NEWS
+README
--- amanda-3.2.1.orig/debian/amanda-client.prerm
+++ amanda-3.2.1/debian/amanda-client.prerm
@@ -0,0 +1,5 @@
+#!/bin/sh -e
+
+update-inetd --remove "amanda "
+
+#DEBHELPER#
--- amanda-3.2.1.orig/debian/examples
+++ amanda-3.2.1/debian/examples
@@ -0,0 +1 @@
+example
--- amanda-3.2.1.orig/debian/amanda-client.lintian
+++ amanda-3.2.1/debian/amanda-client.lintian
@@ -0,0 +1,11 @@
+amanda-client: setuid-binary usr/lib/amanda/application/amgtar 4754 root/backup
+amanda-client: setuid-binary usr/lib/amanda/application/amstar 4754 root/backup
+amanda-client: setuid-binary usr/lib/amanda/calcsize 4754 root/backup
+amanda-client: setuid-binary usr/lib/amanda/killpgrp 4754 root/backup
+amanda-client: setuid-binary usr/lib/amanda/rundump 4754 root/backup
+amanda-client: setuid-binary usr/lib/amanda/runtar 4754 root/backup
+amanda-client: non-standard-dir-perm var/lib/amanda/ 0770 != 0755
+amanda-client: non-standard-dir-perm var/lib/amanda/gnutar-lists/ 0770 != 0755
+amanda-client: maintainer-script-needs-depends-on-update-inetd prerm
+amanda-client: maintainer-script-needs-depends-on-update-inetd postinst
+amanda-client: possible-gpl-code-linked-with-openssl
--- amanda-3.2.1.orig/debian/amanda-client.files
+++ amanda-3.2.1/debian/amanda-client.files
@@ -0,0 +1,19 @@
+usr/lib/amanda/amandad
+usr/lib/amanda/application/*
+usr/lib/amanda/calcsize
+usr/lib/amanda/killpgrp
+usr/lib/amanda/patch-system
+usr/lib/amanda/rundump
+usr/lib/amanda/runtar
+usr/lib/amanda/selfcheck
+usr/lib/amanda/sendbackup
+usr/lib/amanda/sendsize
+usr/sbin/amfetchdump
+usr/sbin/amoldrecover
+usr/sbin/amrecover
+usr/sbin/amrestore
+usr/share/man/man5/amanda-client.conf.5.gz
+usr/share/man/man7/amanda-applications.7.gz
+usr/share/man/man8/amfetchdump.8.gz
+usr/share/man/man8/amrecover.8.gz
+usr/share/man/man8/amrestore.8.gz
--- amanda-3.2.1.orig/debian/disklist
+++ amanda-3.2.1/debian/disklist
@@ -0,0 +1,68 @@
+# sample Amanda2 disklist file, derived from CS.UMD.EDU's disklist
+#
+# If your configuration is called, say, "DailySet1", then this file
+# normally goes in /etc/amanda/DailySet1/disklist.
+#
+# File format is:
+#
+# hostname diskdev dumptype
+#
+# where the dumptypes are defined by you in amanda.conf.
+
+
+# At our site, root partitions have a different dumptype because they
+# are of lower priority; they don't contain user data, and don't change
+# much from the department prototype. In a crunch, they can be left for
+# last or skipped.
+
+#hostname hda2 comp-user
+
+# A SPARCstation 1+
+#salty sd0a comp-root
+#salty sd0g comp-user
+#salty sd1g comp-user
+#salty sd2a comp-root
+#salty sd2g comp-user
+#salty sd3c comp-user
+
+# A DECstation 3100
+#slithy rz1a comp-root
+#slithy rz1g comp-user
+#slithy rz3a comp-root
+#slithy rz3g comp-user
+
+# We don't run compression on the master host since it is going to be
+# busy enough running amanda.
+#master sd0a nocomp-root
+#master sd0g nocomp-user
+# the holding disk can't be dumped to itself, it uses a disktype that
+# specifies the "no-hold" option (see amanda.conf).
+#master sd1c holding-disk
+
+# The chairman's disk is high priority to make sure it gets done.
+#bigwig sd0a comp-root
+#bigwig sd0g comp-high
+# Likewise the named databases in the root partition on our primary
+# nameserver. Also, compression is turned off because we don't want
+# to create any unnecessary load on this baby (it's only a Sun3).
+#bozo sd0a nocomp-high
+#bozo sd0g nocomp-user
+#bozo sd4c nocomp-user
+
+# Dump Joe's NetBSD machine, with the mounted MS-DOS partition dumped
+# using tar.
+#joespc wd0a comp-root
+#joespc wd0e comp-user
+#joespc /msdos comp-user-tar
+
+# Some really slow machines, like Sun2's and some Vaxstations, take
+# forever to compress their dumps: it's just not worth it.
+
+# A Sun2
+#cleo sd0a nocomp-root
+#cleo sd0g nocomp-user
+# A VaxStation
+#susie rz8a nocomp-root
+#susie rz8g nocomp-user
+
+# and so on ... well, you get the idea
--- amanda-3.2.1.orig/debian/xinetd.d/amidxtape
+++ amanda-3.2.1/debian/xinetd.d/amidxtape
@@ -0,0 +1,15 @@
+#default: on
+# description: The amanda tape service
+service amidxtape
+{
+# only_from =
+ socket_type = stream
+ protocol = tcp
+ wait = no
+ user = backup
+ group = backup
+ groups = yes
+ server = /usr/lib/amanda/amidxtaped
+ server_args = -auth=bsd amdump amindexd amidxtaped
+ disable = no
+}
--- amanda-3.2.1.orig/debian/xinetd.d/amandaidx
+++ amanda-3.2.1/debian/xinetd.d/amandaidx
@@ -0,0 +1,15 @@
+#default: on
+# description: The amanda index service
+service amandaidx
+{
+# only_from =
+ socket_type = stream
+ protocol = tcp
+ wait = no
+ user = backup
+ group = backup
+ groups = yes
+ server = /usr/lib/amanda/amindexd
+ server_args = -auth=bsd amdump amindexd amidxtaped
+ disable = no
+}
--- amanda-3.2.1.orig/debian/xinetd.d/amanda
+++ amanda-3.2.1/debian/xinetd.d/amanda
@@ -0,0 +1,15 @@
+# default: on
+# description: The amanda service
+service amanda
+{
+# only_from =
+ socket_type = dgram
+ protocol = udp
+ wait = yes
+ user = backup
+ group = backup
+ groups = yes
+ server = /usr/lib/amanda/amandad
+ server_args = -auth=bsd amdump amindexd amidxtaped
+ disable = no
+}
--- amanda-3.2.1.orig/debian/po/gl.po
+++ amanda-3.2.1/debian/po/gl.po
@@ -0,0 +1,34 @@
+# Galician translation of amanda's debconf templates
+# This file is distributed under the same license as the amanda package.
+# Jacobo Tarrio , 2007.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2007-03-09 09:24+0100\n"
+"Last-Translator: Jacobo Tarrio \n"
+"Language-Team: Galician \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Combine /var/lib/amandates e /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"No seu sistema existen os dous ficheiros, /var/lib/amandates e /var/lib/"
+"amanda/amandates. Revise os ficheiros e combine o contido interesante no "
+"ficheiro /var/lib/amanda/amandates e elimine o ficheiro antigo, /var/lib/"
+"amandates."
--- amanda-3.2.1.orig/debian/po/pt_BR.po
+++ amanda-3.2.1/debian/po/pt_BR.po
@@ -0,0 +1,44 @@
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME \n"
+"Language-Team: LANGUAGE \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+#, fuzzy
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Por favor junte /var/lib/amandates e /var/lib/amanda/amandates."
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Voc possui ambos /var/lib/amandates e /var/lib/amanda/amandates. Por favor "
+"revise os arquivos, junte os contedos que lhe importam para a localizao /"
+"var/lib/amanda/amandates e remova o antigo arquivo /var/lib/amandates."
--- amanda-3.2.1.orig/debian/po/cs.po
+++ amanda-3.2.1/debian/po/cs.po
@@ -0,0 +1,42 @@
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-06-04 17:06+0200\n"
+"Last-Translator: Miroslav Kure \n"
+"Language-Team: Czech \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Spojte prosím /var/lib/amandates a /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"V systému máte soubor /var/lib/amandates i /var/lib/amanda/amandates. Oba "
+"soubory prohlédněte, zajímavý obsah slučte do /var/lib/amanda/amandates a "
+"starý soubor /var/lib/amandates smažte."
--- amanda-3.2.1.orig/debian/po/it.po
+++ amanda-3.2.1/debian/po/it.po
@@ -0,0 +1,34 @@
+# Italian (it) translation of debconf templates for amanda
+# Copyright (C) 2004 Software in the Public Interest
+# This file is distributed under the same license as the amanda package.
+# Luca Monducci , 2004-2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 1:2.5.0p2 italian debconf templates\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-05-30 10:30+0200\n"
+"Last-Translator: Luca Monducci \n"
+"Language-Team: Italian \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Unire /var/lib/amandates e /var/lib/amanda/amndates."
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Esistono sia /var/lib/amandates che /var/lib/amanda/amandates. Controllare i "
+"file e unire tutte le parti utili in /var/lib/amanda/amandates e poi "
+"rimuovere il file /var/lib/amanadates."
--- amanda-3.2.1.orig/debian/po/nl.po
+++ amanda-3.2.1/debian/po/nl.po
@@ -0,0 +1,49 @@
+# translation of amanda 1:2.5.0p2-1_templates.po to Dutch
+# This file is distributed under the same license as the amanda package.
+# Please see debian/copyright.
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+# Luk Claes , 2004
+# This is an unofficial translation
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 1:2.5.0p2-1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-06-18 20:45+0100\n"
+"Last-Translator: Kurt De Bree \n"
+"Language-Team: Debian l10n Dutch \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=iso-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Voeg /var/lib/amandates en /var/lib/amanda/amandates samen."
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Zowel /var/lib/amandates als /var/lib/amanda/amandates zijn op uw "
+"systeemaanwezig. Kijk deze bestanden na en combineer de inhoud u belangrijk "
+"vindt, in /var/lib/amanda/amandates, en verwijder het oude bestand /var/lib/"
+"amandates."
--- amanda-3.2.1.orig/debian/po/vi.po
+++ amanda-3.2.1/debian/po/vi.po
@@ -0,0 +1,33 @@
+# Vietnamese Translation for Amanda.
+# Copyright © 2010 Free Software Foundation, Inc.
+# Clytie Siddall , 2005-2010.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 1/3.1.0-1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2010-10-31 13:45+1030\n"
+"Last-Translator: Clytie Siddall \n"
+"Language-Team: Vietnamese \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: LocFactoryEditor 1.8\n"
+
+#: ../templates:1001
+#. Type: error
+#. Description
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Hòa trộn « /var/lib/amandates » và « /var/lib/amanda/amandates »"
+
+#: ../templates:1001
+#. Type: error
+#. Description
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Đồng thời có cả hai tập tin « /var/lib/amandates » và « /var/lib/amanda/amandates ». Hãy xem lại hai tập tin đó, sau đó hoà trộn nội dung muốn giữ lại vào vị trí « /var/lib/amanda/amandates », và gỡ bỏ tập tin cũ « /var/lib/amandates »."
--- amanda-3.2.1.orig/debian/po/pt.po
+++ amanda-3.2.1/debian/po/pt.po
@@ -0,0 +1,36 @@
+# Portuguese translation of amanda debconf messages.
+# Copyright (C) 2007 Carlos Lisboa
+# This file is distributed under the same license as the amanda package.
+# Carlos Lisboa , 2007.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2007-02-04 12:24+0000\n"
+"Last-Translator: Carlos Lisboa \n"
+"Language-Team: Portuguese \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr ""
+"Por favor faça a fusão de /var/lib/amandates e /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Possui tanto o /var/lib/amandates como o /var/lib/amanda/amandates. Por "
+"favor reveja esses ficheiros, e faça a fusão do conteúdo que pretende para o "
+"local /var/lib/amanda/amandates, e remova o ficheiro antigo /var/lib/"
+"amandates."
--- amanda-3.2.1.orig/debian/po/fr.po
+++ amanda-3.2.1/debian/po/fr.po
@@ -0,0 +1,49 @@
+# translation of fr.po to French
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+# Original french translation by an unknown contributor
+#
+# Christian Perrier , 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: fr\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-05-28 17:13+0200\n"
+"Last-Translator: Christian Perrier \n"
+"Language-Team: French \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr ""
+"Fusion indispensable de /var/lib/amandates et /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Les deux fichiers /var/lib/amandates et /var/lib/amanda/amandates existent. "
+"Veuillez les examiner et fusionner les donnes importantes dans le fichier /"
+"var/lib/amanda/amandates; supprimez ensuite l'ancien fichier /var/lib/"
+"amandates. "
--- amanda-3.2.1.orig/debian/po/de.po
+++ amanda-3.2.1/debian/po/de.po
@@ -0,0 +1,43 @@
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-10-29 15:05+0100\n"
+"Last-Translator: Helge Kreutzmann \n"
+"Language-Team: de \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Bitte vereinigen Sie /var/lib/amandates und /var/lib/amanda/amandates."
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Es existieren die beiden Verzeichnisse /var/lib/amandates und /var/lib/"
+"amanda/amandates. Bitte berprfen Sie die Dateien und verschieben Sie den "
+"Inhalt, der Ihnen wichtig ist, nach /var/lib/amanda/amandates und lschen "
+"Sie die alte Datei /var/lib/amandates."
--- amanda-3.2.1.orig/debian/po/da.po
+++ amanda-3.2.1/debian/po/da.po
@@ -0,0 +1,34 @@
+# Danish translation for amanda.
+# Copyright (C) 2010 amanda og nedenstående oversættere.
+# This file is distributed under the same license as the amanda package.
+# Joe Hansen (joedalton2@yahoo.dk), 2010.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2010-12-30 19:25+0200\n"
+"Last-Translator: Joe Hansen \n"
+"Language-Team: Danish \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Venligst flet /var/lib/amandates og /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Du har både /var/lib/amandates og /var/lib/amanda/amandates. Du rådes til at "
+"gennemse filerne, og flette indholdet der interesserer dig til den nye "
+"lokation /var/lib/amanda/amandates og fjern den gamle fil /var/lib/amandates."
--- amanda-3.2.1.orig/debian/po/ru.po
+++ amanda-3.2.1/debian/po/ru.po
@@ -0,0 +1,46 @@
+# translation of amanda_1:2.5.2p1-1_ru.po to Russian
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+# Developers do not need to manually edit POT or PO files.
+#
+# Yuri Kozlov , 2008.
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 1:2.5.2p1-1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2008-03-15 13:30+0300\n"
+"Last-Translator: Yuri Kozlov \n"
+"Language-Team: Russian \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
+"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr ""
+"Объедините настройки из /var/lib/amandates и /var/lib/amanda/amandates."
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"В системе найдены файлы: /var/lib/amandates и /var/lib/amanda/amandates. "
+"Просмотрите эти файлы, объедините их настройки в файле /var/lib/amanda/"
+"amandates и удалите старый файл /var/lib/amandates."
--- amanda-3.2.1.orig/debian/po/fr.po.poedit
+++ amanda-3.2.1/debian/po/fr.po.poedit
@@ -0,0 +1,7 @@
+#. This catalog was generated by poedit
+#. Number of items: 2
+#. Language: French
+#. Country:
+#. Basepath:
+#. Paths: 0
+#. Keywords: 0
--- amanda-3.2.1.orig/debian/po/ar.po
+++ amanda-3.2.1/debian/po/ar.po
@@ -0,0 +1,47 @@
+# translation of ar.po to
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+# Developers do not need to manually edit POT or PO files.
+#
+# Ossama M. Khayat, 2005.
+# Ossama M. Khayat , 2010.
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda_1:2.4.5-1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2010-09-09 04:51+0300\n"
+"Last-Translator: Ossama M. Khayat \n"
+"Language-Team: Arabic \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Lokalize 1.0\n"
+"Plural-Forms: nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n%100>=3 "
+"&& n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5;\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "الرجاء دمج /var/lib/amandates و /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"لديك كلاً من /var/lib/amandates و /var/lib/amanda/amandates. الرجاء معاينة "
+"الملفات، ودمج المحتويات التي تهمك حول موقع /var/lib/amanda/amandates، وإزالة "
+"الملف /var/lib/amandates القديم."
+
--- amanda-3.2.1.orig/debian/po/ja.po
+++ amanda-3.2.1/debian/po/ja.po
@@ -0,0 +1,43 @@
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 2.5.0p2-2.1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-10-11 00:08+0900\n"
+"Last-Translator: Hideki Yamane (Debian-JP) \n"
+"Language-Team: Japanese \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "/var/lib/amandates と /var/lib/amanda/amandates をマージしてください。"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"/var/lib/amandates と /var/lib/amanda/amandates の両方があります。ファイルを"
+"確認し、/var/lib/amanda/amandates に注意が必要な内容をマージしてから、古い"
+"ファイル /var/lib/amandates を削除してください。"
--- amanda-3.2.1.orig/debian/po/POTFILES.in
+++ amanda-3.2.1/debian/po/POTFILES.in
@@ -0,0 +1 @@
+[type: gettext/rfc822deb] templates
--- amanda-3.2.1.orig/debian/po/fi.po
+++ amanda-3.2.1/debian/po/fi.po
@@ -0,0 +1,37 @@
+# Copyright (C) 2009
+# This file is distributed under the same license as the amanda package.
+#
+# Esko Arajärvi , 2009.
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2009-06-30 22:11+0300\n"
+"Last-Translator: Esko Arajärvi \n"
+"Language-Team: Finnish \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Lokalize 0.3\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Yhdistä /var/lib/amandates ja /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Järjestelmässä on sekä tiedosto /var/lib/amandates että tiedosto "
+"/var/lib/amanda/amandates. Tarkasta molemmat tiedostot ja yhdistä "
+"tarvittava sisältö tiedostoon /var/lib/amanda/amandates. Poista tämän "
+"jälkeen vanha tiedosto /var/lib/amandates."
+
--- amanda-3.2.1.orig/debian/po/es.po
+++ amanda-3.2.1/debian/po/es.po
@@ -0,0 +1,60 @@
+# amanda translation to spanish
+# Copyright (C) 2007 Free Software Foundation, Inc.
+# This file is distributed under the same license as the package.
+#
+# Changes:
+# - Initial translation
+# Manuel Porras Peralta , 2007
+#
+#
+# Traductores, si no conoce el formato PO, merece la pena leer la
+# documentación de gettext, especialmente las secciones dedicadas a este
+# formato, por ejemplo ejecutando:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Equipo de traducción al español, por favor lean antes de traducir
+# los siguientes documentos:
+#
+# - El proyecto de traducción de Debian al español
+# http://www.debian.org/intl/spanish/
+# especialmente las notas y normas de traducción en
+# http://www.debian.org/intl/spanish/notas
+#
+# - La guía de traducción de po's de debconf:
+# /usr/share/doc/po-debconf/README-trans
+# o http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Si tiene dudas o consultas sobre esta traducción consulte con el último
+# traductor (campo Last-Translator) y ponga en copia a la lista de
+# traducción de Debian al español ()
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2007-01-29 14:29+0100\n"
+"Last-Translator: Manuel Porras Peralta «Venturi» \n"
+"Language-Team: Debian Spanish \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Por favor, combine «/var/lib/amandates» y «/var/lib/amanda/amandates»"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Se han detectado los archivos «/var/lib/amandates» y «/var/lib/amanda/"
+"amandates». Por favor, revíselos, combine los contenidos que necesite en el "
+"archivo «/var/lib/amanda/amandates», y borre el archivo antiguo «/var/lib/"
+"amandates»."
--- amanda-3.2.1.orig/debian/po/templates.pot
+++ amanda-3.2.1/debian/po/templates.pot
@@ -0,0 +1,32 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR , YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME \n"
+"Language-Team: LANGUAGE \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr ""
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
--- amanda-3.2.1.orig/debian/po/sv.po
+++ amanda-3.2.1/debian/po/sv.po
@@ -0,0 +1,42 @@
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 1:2.5.0p2-1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-06-27 23:05+0100\n"
+"Last-Translator: Daniel Nylander \n"
+"Language-Team: Swedish \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Sammanfoga /var/lib/amandates och /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Du har bde /var/lib/amandates och /var/lib/amanda/amandates. Granska dessa "
+"filer och sammanfoga innehllet som du bryr dig om till den nya platsen /var/"
+"lib/amanda/amandates. Ta sedan bort den gamla filen /var/lib/amandates."